<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Fracture analysis on a piezoelectric sensor with a viscoelastic interface
2
Fracture analysis on cage rivets of a cylindrical roller bearing
3
Fracture analysis on the 4th compressor disc of some engine
4
Fracture analysis on the arc-shaped interface in a layered cylindrical piezoelectric sensor polarized along its axis
5
Fracture analysis on the arc-shaped interfacial crack between a homogeneous cylinder and its coating
6
Fracture and Ageing in Bone: Toughness and Structural Characterization
7
Fracture and Aspiration of Tracheostomy Tube
8
Fracture and ballistic-induced phase transformation in tempered martensitic low-carbon armour steels
9
Fracture and damage analysis in design
10
Fracture and Damage in Engineering Applications
11
Fracture and damage in ouasibrittle structures: Experiment, modelling and computer analysis: By Z.P. Bazant, Z. Bittnar, M. Jirasek and J. Mazars (eds). Chapman & Hall, New York, 1994, pp. xiv + 646, price $59.95 paperbook, ISBN 0-419-19280-8
12
Fracture and damage mechanics modelling of thin-walled structures – An overview
13
Fracture and deformation of bulk metallic glasses and their composites
14
Fracture and deformation of NiAl single crystals
15
Fracture and deformation of NiAl single crystals
16
Fracture and deformation properties of Ni–Fe superalloy in cryogenic high magnetic field environments Original Research Article
17
Fracture and dislocation of a pulmonary stent after cardiac massage
18
Fracture and dislocation properties: an ab-initio electronic structure approach
19
Fracture and dislocation properties: an ab-initio electronic structure approach
20
Fracture and failure behavior of basalt fiber mat-reinforced vinylester/epoxy hybrid resins as a function of resin composition and fiber surface treatment
21
Fracture and fatigue analysis of an agitator shaft with a circumferential notch
22
Fracture and fatigue analysis of curved or kinked cracks near fastener holes
23
Fracture and fatigue crack growth behaviour of PMMC friction stir welded butt joints
24
Fracture and fatigue failure in the Spanish codes for design of steel structures
25
FRACTURE AND FATIGUE OF FERROELECTRICS UNDER ELECTRIC AND MECHANICAL LOADING
26
Fracture and fatigue of natural fiber-reinforced cementitious composites
27
Fracture and fatigue properties of metallic alloys S275 J2 and Al7075 T6 at low temperatures
28
Fracture and fatigue response of a self-healing epoxy adhesive
29
FRACTURE AND FATIGUE STRENGTH OF SLABS REPAIRED WITH
30
Fracture and flexural behavior of high performance fiber reinforced concrete
31
Fracture and flexural characterization of natural fiber-reinforced polymer concrete
32
Fracture and fragmentation of quartz and albite during single-diamond sliding-point contact
33
Fracture and general yield for carbon steel pipes with local wall thinning
34
Fracture and horizontal stress analysis of Dalan Formation using FMI image log in one of southwestern Iranian oil wells
35
Fracture and impact properties of short discrete jute fibre-reinforced cementitious composites
36
Fracture and in-situ stress patterns and impact on performance in the Khuff structural prospects, eastern offshore Saudi Arabia
37
Fracture and interfacial delamination origins of bilayer ceramic composites for dental restorations
38
Fracture and interlaminar properties of clay-modified epoxies and their glass reinforced laminates
39
Fracture and manufacturing: selected papers from EUROMECH Colloquium 418
40
Fracture and microstructure of open cell aluminum foam
41
Fracture and negative Poisson’s ratio of novel spanned-fullerenes nanotube networks under tension
42
Fracture and nonunion of the olecranon in total elbow arthroplasty
43
Fracture and physical properties of carbon anodes for the aluminum reduction cell
44
Fracture and Posterior Dislocation of Meniscal Bearing insert in Mobile Bearing Unicompartmental Knee Arthroplasty: A Case Report
45
Fracture and progressive failure of defective graphene sheets and carbon nanotubes
46
Fracture and repair of bone: a multiscale problem
47
Fracture and shear bond strength analyses of different dental veneering ceramics to zirconia
48
Fracture and springback on Double Bulge Tube Hydro-Forming
49
Fracture and surface crust development in a Holocene pahoehoe lava flow on the Island of Tenerife, Canaries
50
Fracture and Tension Properties of Roller Compacted Concrete Cores in Uniaxial Tension
51
Fracture and textural properties of low fat egg yolk gels containing emulsion droplets
52
Fracture and the risk of coronary events in women with heart disease
53
Fracture and toughening mechanisms in SiC nanofiber reinforced SiC matrix nanocomposites with amorphous carbon coatings
54
Fracture and toughening mechanisms of GNP-based nanocomposites in modes I and II fracture
55
Fracture anisotropy characterization in crystalline bedrock using field-scale azimuthal self potential gradient
56
Fracture anisotropy in silicon single crystal
57
Fracture anisotropy in silicon single crystal
58
Fracture assessment of a clad steel using various SINTAP defect assessment procedure levels
59
Fracture assessment of an interface crack between two dissimilar magnetoelectroelastic materials under heat flow and magnetoelectromechanical loadings
60
Fracture assessment of Brazilian disc specimens weakened by blunt V-notches under mixed mode loading by means of local energy
61
Fracture assessment of damaged square hollow section (SHS) K-joint using BS7910:2005
62
Fracture assessment of polymer concrete in chemical degradation solutions
63
Fracture assessment of shallow-flaw cruciform beams tested under uniaxial and biaxial loading conditions
64
Fracture assessment of shallow-flaw cruciform beams tested under uniaxial and biaxial loading conditions
65
Fracture assessment of shallow-flaw cruciform beams tested under uniaxial and biaxial loading conditions Original Research Article
66
Fracture assessment of U-notches under mixed mode loading: two procedures based on the ‘equivalent local mode I’ concept
67
Fracture assessment of U-notches under three point bending by means of local energy density
68
Fracture at V-notches with contained plasticity
69
Fracture barrier estimation by the edge fracture test method
70
Fracture behavior and adhesion energy of nanostructured Cu/Mo multilayer films
71
Fracture behavior and damage evaluation of polyvinyl alcohol fiber concrete using acoustic emission technique
72
Fracture behavior and damage mechanisms identification of SiC/glass ceramic composites using AE monitoring
73
Fracture behavior and environmental stress cracking resistance (ESCR) of HIPS/PE blends and the effect of compatibilization on their properties
74
Fracture behavior and mechanical properties of high strength aluminum alloys in the as-cast condition
75
Fracture behavior and mechanical properties of Mg–4Y–2Nd–1Gd–0.4Zr (wt.%) alloy at room temperature
76
Fracture behavior and mechanism of 2D C/SiC–BCx composite at room temperature
77
Fracture behavior and microstructure of steel fiber reinforced cast iron
78
Fracture behavior and structural transition of Ni46Mn33Ga17Cu4−xZrx alloys
79
Fracture behavior and toughening mechanism in Zanchor reinforced composites under mode II loading
80
Fracture behavior and toughness of NbSi2-based single crystals and MoSi2(C11b)/NbSi2(C40) duplex crystals with a single set of lamellae Original Research Article
81
Fracture behavior at crack tip — a new framework for cleavage mechanism of steel Original Research Article
82
Fracture behavior dependence on load-bearing capacity of filler in nano- and microcomposites of polypropylene containing calcium carbonate
83
Fracture behavior in a pressure vessel steel weld
84
Fracture behavior of ∑9 [1 1 0] asymmetric tilt boundaries in Cu doped with Bi
85
Fracture behavior of 9% nickel high-strength steel at various temperatures: Part I. Tensile tests
86
Fracture behavior of a commercial starch/polycaprolactone blend reinforced with different layered silicates
87
Fracture behavior of a corroded structural component under bending load
88
Fracture behavior of a self-healing, toughened epoxy adhesive
89
Fracture behavior of Alloy 625 with different precipitate microstructures
90
Fracture behavior of AlN ceramics with rare earth oxides
91
Fracture Behavior of Alumina-based Prismatic Ceramic Composites
92
Fracture behavior of aluminum borate whisker-reinforced aluminum alloy 6061 composite
93
Fracture behavior of austenitic stainless steels irradiated in PWR
94
Fracture behavior of bimodal polyethylene: Effect of molecular weight distribution characteristics
95
Fracture behavior of bulk metallic glass/metal laminate composites
96
Fracture behavior of bulk metallic glass/metal laminate composites
97
Fracture behavior of carbon steel pipe with local wall thinning subjected to bending load
98
Fracture behavior of carbon steel pipe with local wall thinning subjected to bending load
99
Fracture behavior of carbon steel pipe with local wall thinning subjected to bending load Original Research Article
100
Fracture behavior of ceramic coatings during thermal cycling evaluated by acoustic emission method using laser interferometers
101
Fracture behavior of ceramic coatings during thermal cycling evaluated by acoustic emission method using laser interferometers
102
Fracture behavior of CFRPs impacted by relatively high-velocity steel sphere
103
Fracture Behavior of Cold Sprayed 304 Stainless Steel Coating During Cold Rolling Original Research Article
104
Fracture behavior of concrete beams reinforced with mixed long/short steel fibers
105
Fracture behavior of concrete members reinforced with structural synthetic fibers
106
Fracture behavior of concrete–concrete interface using acoustic emission technique
107
Fracture behavior of cylindrical porous alumina with pore gradient
108
Fracture behavior of directionally solidified CeO2- and Pr2O3-doped Y3Al5O12/Al2O3 eutectic composites
109
Fracture behavior of directionally solidified CeO2- and Pr2O3-doped Y3Al5O12/Al2O3 eutectic composites
110
Fracture behavior of directionally solidified NiAl-Mo and NiAl-V eutectics
111
Fracture behavior of directionally solidified NiAl-Mo and NiAl-V eutectics
112
Fracture behavior of engineered stress profile soda lime silicate glass
113
Fracture behavior of epoxy nanocomposites reinforced with different carbon nano-reinforcements
114
Fracture behavior of glass fiber reinforced polymer composite
115
Fracture behavior of graphite coated with titanium compounds by chemical vapor deposition
116
Fracture behavior of graphite coated with titanium compounds by chemical vapor deposition
117
Fracture behavior of heat-affected zone in low alloy steels
118
Fracture behavior of high-strength, high-conductivity copper alloys
119
Fracture behavior of HT-90 structural foam – A three-dimensional analysis
120
Fracture behavior of hydroxyapatite/polymer interpenetrating network composites prepared by in situ polymerization process
121
Fracture behavior of hydroxyapatite/polymer interpenetrating network composites prepared by in situ polymerization process
122
Fracture behavior of individual carbon fibers in tension using nano-fabricated notches
123
Fracture behavior of laminated SiC composites
124
Fracture behavior of laser-clad joint of Stellite 21 on AISI 316L stainless steel
125
Fracture behavior of lithia disilicate- and leucite-based ceramics
126
Fracture behavior of low-density replicated aluminum alloy foams
127
Fracture behavior of monofilament-reinforced multicrystalline copper composites Original Research Article
128
Fracture behavior of multi-layered composites under impact loading
129
Fracture behavior of nanocomposites based on poly(ethylene-co-methacrylic acid) ionomers
130
Fracture behavior of nanotube–polymer composites: Insights on surface roughness and failure mechanism
131
Fracture behavior of nitrile rubber-cellulose II nanocomposites
132
Fracture behavior of notched specimens of TiAl alloys
133
Fracture behavior of nuclear graphite NBG-18 Original Research Article
134
Fracture behavior of pervious concretes: The effects of pore structure and fibers
135
Fracture behavior of poled piezoelectric PZT under mechanical and electrical loads
136
Fracture behavior of RC members subjected to bending shear and torsion using acoustic emission method
137
Fracture behavior of seawater-absorbed carbon/epoxy laminated composites in the hydrostatic pressure condition
138
Fracture behavior of silicon nitride ceramics subjected to hypervelocity impact
139
Fracture behavior of silicon nitride ceramics under combined compression–torsion stresses analyzed by multiaxial fracture statistics
140
Fracture behavior of straight pipe and elbow with local wall thinning Original Research Article
141
Fracture behavior of superalloy IN738LC with various precipitate microstructures
142
Fracture behavior of superalloy IN738LC with various precipitate microstructures
143
Fracture behavior of the compact tension specimens in NiTi shape memory alloys
144
Fracture behavior of thin foils
145
Fracture behavior of UHMWPE in non-implanted, shelf-aged knee prostheses after gamma irradiation in air
146
Fracture behavior of woven steel fiber reinforced and sand particle filled polymer composites
147
Fracture behavior of α-zirconium phosphate-based epoxy nanocomposites Original Research Article
148
Fracture behavior under mixed-mode loading of ceramic plasma-sprayed thermal barrier coatings at ambient and elevated temperatures
149
Fracture behaviors and mechanism of 2D C/SiC-BCx composite under tensile load
150
Fracture behaviors and microstructural failure mechanisms of laminated Ti–TiBw/Ti composites
151
Fracture behaviors of a new steel fiber reinforced recycled aggregate concrete with crumb rubber
152
Fracture behaviors of isotactic polypropylene/poly(ethylene oxide) blends: Effect of annealing
153
Fracture behaviors of nanowire-coated metal/polymer systems under mode-I loading condition Original Research Article
154
Fracture behaviors of PP/mPE thermoplastic vulcanizate via peroxide crosslinking
155
Fracture behaviour and cleavage initiation in hypoeutectoid pearlitic steel
156
Fracture behaviour and fracture toughness of ductile closed-cell metallic foams Original Research Article
157
Fracture behaviour and toughening mechanism in Zanchor reinforced composites under mode I loading
158
Fracture behaviour and toughness of a plane-woven SiC fibre-reinforced SiC matrix composite
159
Fracture behaviour and toughness of a plane-woven SiC fibre-reinforced SiC matrix composite
160
Fracture behaviour in medium-carbon Ti–V–N and V–N microalloyed ferritic-pearlitic and bainitic forging steels with enhanced machinability
161
Fracture behaviour in medium-carbon Ti–V–N and V–N microalloyed ferritic-pearlitic and bainitic forging steels with enhanced machinability
162
Fracture behaviour of 2D-weaved, silica–silica continuous fibre-reinforced, ceramic–matrix composites (CFCCs)
163
Fracture behaviour of a magnesium–aluminium alloy treated by selective laser surface melting treatment
164
Fracture behaviour of a polypropylene film
165
Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite
166
Fracture behaviour of a TiAl alloy under various loading modes
167
Fracture behaviour of Al2O3/SiC nanocomposite ceramics after crack healing treatment
168
Fracture behaviour of alumina and zirconia thin layered laminate
169
Fracture behaviour of alumina ceramics by biaxial ball-on-3-ball test
170
Fracture behaviour of alumina–calcium hexaluminate composites obtained by colloidal processing
171
Fracture behaviour of an Al2O3–ZrO2 multi-layered ceramic with residual stresses due to phase transformations*
172
Fracture behaviour of an Al–Mg–Si industrial alloy
173
Fracture behaviour of an Al–Mg–Si industrial alloy
174
Fracture behaviour of an anisotropic polygranular graphite (PGA)
175
Fracture behaviour of bitumen emulsion mortar mixtures
176
Fracture behaviour of bread crust: Effect of bread cooling conditions Original Research Article
177
Fracture behaviour of brittle fibre-reinforced solids by a new FE formulation
178
Fracture behaviour of chemical vapour deposited and hot isostatically pressed zinc sulphide ceramics
179
Fracture behaviour of composite maritime T-joints
180
Fracture behaviour of heat cured fly ash based geopolymer concrete
181
Fracture behaviour of high impact polystyrene Influence of particle morphology
182
Fracture behaviour of high-strength concrete at a wide range of loading rates
183
Fracture behaviour of isotactic polypropylene under static loading condition
184
Fracture behaviour of linear low density polyethylene – fumed silica nanocomposites
185
Fracture behaviour of magnesia and magnesia–spinel composites before and after thermal shock
186
Fracture behaviour of maraging steel tensile specimens and pressurized cylindrical vessels
187
Fracture behaviour of Mg-PSZ ceramics: Comparative estimates
188
Fracture behaviour of microcrack-free alumina–aluminium titanate ceramics with second phase nanoparticles at alumina grain boundaries
189
Fracture behaviour of model silicon carbide filaments
190
Fracture behaviour of mullite fibre reinforced–mullite matrix composites under quasi-static and ballistic impact loading
191
Fracture behaviour of neutron irradiated beryllium
192
Fracture behaviour of notched and un-notched powder metallurgical (P/M) green compacts
193
Fracture behaviour of notched round bars made of PMMA subjected to torsion at −60 °C
194
Fracture behaviour of notched round bars made of PMMA subjected to torsion at room temperature
195
Fracture behaviour of PC/ABS resin under mixed-mode loading
196
Fracture behaviour of plain and fiber-reinforced concrete with different water content under mixed mode loading
197
Fracture behaviour of polycrystalline tungsten
198
Fracture behaviour of polyethylene naphthalate (PEN)
199
Fracture behaviour of polypropylene films at different temperatures: assessment of the EWF parameters
200
Fracture behaviour of polypropylene films at different temperatures: fractography and deformation mechanisms studied by SEM
201
Fracture behaviour of polypropylene sheets filled with epoxidized natural rubber (ENR)-treated coal gangue powder
202
Fracture behaviour of potato samples (cv. Desiree) under uniaxial compression Original Research Article
203
Fracture behaviour of the compact tension specimens of nickel-based single crystal superalloys at high temperatures
204
Fracture behaviour of the compact tension specimens of nickel-based single crystal superalloys at high temperatures
205
Fracture behaviour of thermal barrier coatings after high temperature exposure in air
206
Fracture behaviour of thermal barrier coatings after high temperature exposure in air
207
Fracture behaviour of thermosetting polymers for ophthalmic lenses
208
Fracture behaviour of Ti3Al single crystals for the basal slip orientation
209
Fracture behaviour of tungsten–vanadium and tungsten–tantalum alloys and composites
210
FRACTURE BEHAVIOUR OF UNTREATED AND SILANE-TREATED TALC-FILLED POLYPROPYLENE COMPOSITES
211
Fracture behaviour of Y-TZP ceramics: New outcomes
212
Fracture behaviours of epoxy nanocomposites with nano-silica at low and elevated temperatures
213
Fracture behaviours of in situ silica nanoparticle-filled epoxy at different temperatures
214
Fracture character in compression tests
215
Fracture characterisation of a nuclear vessel steel under dynamic conditions in the transition region
216
Fracture characterisation of short bamboo fibre reinforced polyester composites
217
Fracture characteristics analysis related to the microstructures in titanium alloys
218
Fracture characteristics analysis related to the microstructures in titanium alloys
219
Fracture characteristics and deformation behavior of heterophasic ethylene–propylene copolymers as a function of the dispersed phase composition
220
Fracture characteristics and genetic mechanism of overpressure carbonate reservoirs: Taking the Kenkiyak Oilfield in Kazakhstan as an example
221
Fracture characteristics and microstructural factors in single and duplex annealed Ti–4.5Al–3V–2Mo–2Fe
222
Fracture characteristics and microstructural factors in single and duplex annealed Ti–4.5Al–3V–2Mo–2Fe
223
Fracture characteristics in weathered granites
224
Fracture characteristics of a cold-rolled dual-phase steel
225
Fracture characteristics of Al2O3/YAG composite at room temperature to 2023 K
226
Fracture Characteristics of Austempered Spheroidal Graphite Aluminum Cast Irons Original Research Article
227
FRACTURE CHARACTERISTICS OF BOROSILICATE GLASSES REINFORCED BY METALLIC PARTICLES
228
Fracture characteristics of concrete at early ages
229
Fracture characteristics of different wood species under mode I loading perpendicular to the grain
230
Fracture characteristics of different wood species under mode I loading perpendicular to the grain
231
Fracture characteristics of fatigued Ti–6Al–4V ELI as an implant material
232
Fracture characteristics of fatigued Ti–6Al–4V ELI as an implant material
233
Fracture Characteristics of Fiber Reinforced Composite Bars Used To Form Rigid Orthodontic Anchorage Units
234
Fracture characteristics of freestanding 8 wt% Y2O3–ZrO2 coatings by single edge notched beam and Vickers indentation tests
235
Fracture characteristics of thermal barrier coatings after tensile and bending tests
236
Fracture characteristics of thermally exposed 9Cr–1Mo steel after tensile and impact testing at room temperature
237
Fracture characteristics of TMCP and QT steel weldments with respect to crack length
238
Fracture characteristics to distinguish between accidental injury and non-accidental injury in dogs
239
Fracture characterization and prediction in a volcanic reservoir: A case study of the Permian Jiamuhe Formation in the Jinlong 2 Oil Field, Junggar Basin, China
240
Fracture characterization in patterned thin films by cross-sectional nanoindentation Original Research Article
241
Fracture characterization in tubular LSFCO ceramic membranes
242
Fracture characterization in tubular LSFCO ceramic membranes
243
Fracture characterization in tubular LSFCO ceramic membranes
244
Fracture characterization of bone under mode II loading using the end loaded split test
245
Fracture characterization of C/C composites under various stress modes by monitoring both mechanical and acoustic responses Original Research Article
246
Fracture characterization of Carbon fiber-reinforced polymer-concrete bonded interfaces under four-point bending
247
Fracture characterization of chalk in uniaxial and triaxial tests by rock mechanics, fractographic and electromagnetic radiation methods
248
Fracture characterization of interfacial cracks with frictional contact of the crack surfaces to predict failures in adhesive-bonded joints
249
Fracture characterization of sandwich structures interfaces under mode I loading
250
Fracture characterization using Earth tide analysis
251
Fracture conductivity – Design considerations and benefits in unconventional reservoirs
252
Fracture connectivity from fracture intersections in borehole image logs
253
Fracture control assessment in the base metal and welded joint of a pipeline steel
254
Fracture control of late Archean pluton emplacement in the northern Slave Province, Canada
255
Fracture control on type, morphology and distribution of parasitic volcanic cones: An example from Mt. Etna, Italy
256
Fracture control over thermal–mechanical creep and fatigue crack growth in near-alpha titanium alloy
257
Fracture control parameters for NiTi based shape memory alloys
258
Fracture corridors as seal-bypass systems in siliciclastic reservoir-cap rock successions: Field-based insights from the Jurassic Entrada Formation (SE Utah, USA)
259
FRACTURE CRITERIA FOR VISCOELASTIC AGING SOLIDS
260
FRACTURE CRITERIA FOR VISCOELASTIC AGING SOLIDS
261
Fracture criteria identification using an inverse technique method and blanking experiment
262
Fracture criteria identification using an inverse technique method and blanking experiment
263
Fracture criteria identification using an inverse technique method and blanking experiment
264
Fracture criterion and forming pressure design for superplastic bulging
265
Fracture criterion and forming pressure design for superplastic bulging
266
Fracture criterion for a conducting crack in poled PZT-PIC 151 investigated by stable crack growth Original Research Article
267
Fracture criterion for glass under impact loading
268
Fracture criterion for kinking cracks in a tri-material adhesively bonded joint under mixed mode loading
269
Fracture detection from water saturation log data using a Fourier–wavelet approach
270
Fracture detection problems:: applications and limitations of the energy momentum tensor and related invariants
271
Fracture development around deep underground excavations: Insights from FDEM modelling
272
Fracture development in shale and its relationship to gas accumulation
273
Fracture development on a weak interface ahead of a fluid-driven crack
274
Fracture dimensions, displacements and fluid transport
275
Fracture dislocation of the lateral condyle and medial epicondyle of the humerus associated with complete radial nerve transection
276
Fracture dislocation of the proximal humerus with ipsilateral shaft fracture: a report of two cases
277
Fracture Dynamic Propagation Model of High-Energy Gas Fracturing for Casing Perforated Well
278
Fracture energies at the rupture nucleation points of large interplate earthquakes
279
Fracture energy and crack growth in surface treated Yttria stabilized Zirconia for SOFC applications
280
Fracture energy and crack growth in surface treated Yttria stabilized Zirconia for SOFC applications
281
Fracture energy and softening behavior of high-strength concrete
282
Fracture energy based bi-dissipative damage model for concrete
283
Fracture energy based constitutive models for tensile fracture of metal powder compacts
284
Fracture energy determination and critical crack propagation between core and veneer ceramic interface by experiment and finite element method
285
Fracture energy for repaired cracks with bonded composite patch having two adhesive bands in aircraft structures
286
Fracture energy of concrete at high loading rates in tension
287
Fracture energy of natural fibre reinforced concrete
288
fracture energy of the concrete–FRP interface in strengthened beams
289
FRACTURE ENERGY OF WOOD AND ROOT BURL WOOD OF THUYA (TETRACLINIS ARTICULATA)
290
Fracture energy-based optimisation of steel fibre reinforced concretes
291
Fracture energy–fracture stress relationship for weak polymer–polymer interfaces
292
Fracture examination in concrete through combined digital image correlation and acoustic emission techniques
293
Fracture experiments on through wall cracked elbows under in-plane bending moment: Test results and theoretical/numerical analyses
294
Fracture Extraction from Colored X-Ray Images
295
Fracture fabrication of precision single-crystal silicon surfaces for MEMS devices
296
Fracture failure analysis of AISI 304L stainless steel shaft
297
Fracture failure of a diesel engine piston-pin
298
Fracture failure of a shell structure
299
Fracture failure of connection pipe of truck diesel engine oil-collector
300
Fracture force analysis at the interface of Pd and SrTiO3
301
Fracture Formation Evaluation of Reinforced Concrete Beam Subjected to Cycle Loading Using Acoustic Emission Technique
302
Fracture frequency of all-ceramic crowns during dynamic loading in a chewing simulator using different loading and luting protocols
303
Fracture functions and Jet Calculus
304
Fracture functions from cut vertices Original Research Article
305
Fracture Gap and Callus Area Delineation on Digital Radiogram Utilizing Modified Segmentation Algorithm
306
Fracture healing and transport properties of wellbore cement in the presence of supercritical CO2
307
Fracture History and Risk of Breast and Endometrial Cancer
308
Fracture History in Osteoporosis: Risk Factors and its Effect on Quality of Life
309
Fracture in a rubber-sprung railway wheel
310
Fracture in bending – The straining limits of monolithic sheets and machined tailor-made blanks
311
Fracture in Ceramic-Matrix Composites Reinforced with Strongly Bonded Metal Particles
312
Fracture in confined thin films: A discrete dislocation study Original Research Article
313
Fracture in human cortical bone: local fracture criteria and toughening mechanisms
314
Fracture in lamellar TiAl simulated with the cohesive model
315
Fracture in metal powder compaction
316
Fracture in metal–ceramic composites
317
Fracture in plates of finite thickness
318
Fracture in precursor-derived Si–C–N ceramics – Analysis of crack roughness and damage mechanisms
319
Fracture in quasi-brittle materials: a review of continuum damage-based approaches
320
Fracture in sheet metal forming: Effect of ductile damage evolution
321
Fracture in single-layer zirconia (YSZ)–bond coat alloy (NiCoCrAlY) composite coatings under thermal shock Original Research Article
322
Fracture in Westerly Granite under AE Feedback and Constant Strain Rate Loading: Nucleation, Quasi-static Propagation, and the Transition to Unstable Fracture Propagation
323
Fracture incidence and association with bone mineral density in elderly men and women: the Rotterdam Study
324
Fracture initiation and propagation in intact rock – A review
325
Fracture initiation associated with chemical degradation: observation and modeling
326
Fracture initiation at sharp notches: Correlation using critical stress intensities
327
Fracture initiation during volume increasing reactions in rocks and applications for CO2 sequestration
328
Fracture initiation mechanisms of thin hard coatings during the impact test
329
Fracture initiation of geometrically scaled, notched three-point-bend bars of a low-alloy ferritic steel
330
Fracture initiation revealed by variations in the fatigue fracture morphologies of PA 66 and PET fibers
331
Fracture initiation, development, and reactivation in folded sedimentary rocks at Raplee Ridge, UT
332
Fracture initiation, growth and effect on stress field: a numerical investigation
333
Fracture initiation/propagation parameters for duplex TiAl grain boundaries based on twinning, slip, crystal orientation, and boundary misorientation
334
Fracture instability and limit strength condition in structures with re-entrant corners
335
Fracture investigation at V-notch tip using coherent gradient sensing (CGS)
336
Fracture length scales in human cortical bone: The necessity of nonlinear fracture models
337
Fracture lifetime of hydrogen-charged AISI 4130 alloy steel under intermittent sustained overloads
338
Fracture limit curve in upset forging of cylinders
339
Fracture limit curve in upset forging of cylinders
340
Fracture limit prediction for a double safety structure in cylindrical-type lithium secondary batteries
341
Fracture limit prediction for roller hemming of aluminum alloy sheet
342
Fracture limits of sheet metals under stretch bending
343
Fracture limits of sheet metals under stretch bending
344
Fracture limits of sheet metals under stretch bending
345
Fracture load of different crown systems on zirconia implant abutments
346
Fracture load of provisional fixed partial dentures with long-span fiber-reinforced acrylic resin and thermocycling
347
Fracture load prediction of lead-free solder joints
348
Fracture load predictions and measurements for highly toughened epoxy adhesive joints
349
Fracture loads for ceramic samples with rounded notches
350
Fracture management in llamas and alpacas
351
Fracture mandibulaire sur ostéoradionécrose : option conservatrice médicale « Pentoclo » ?
352
Fracture mandibulaire sur ostéoradionécrose : option conservatrice médicale « Pentoclo » ?
353
Fracture measurements on insulation for high-field superconducting magnets: Relationship to processing regimes and test temperature
354
Fracture mechanical analysis of tungsten armor failure of a water-cooled divertor target
355
Fracture mechanical assessment of interface cracks with contact zones in piezoelectric bimaterials under thermoelectromechanical loadings II. Electrically impermeable interface cracks
356
Fracture mechanical assessment of interface cracks with contact zones in piezoelectric bimaterials under thermoelectromechanical loadings: I. Electrically permeable interface cracks
357
Fracture mechanical behavior of concrete and the condition of its fracture surface
358
Fracture mechanical behavior of red sandstone containing a single fissure and two parallel fissures after exposure to different high temperature treatments
359
Fracture mechanical character of small cracks in polycrystalline materials: concept and numerical K calculations Original Research Article
360
Fracture mechanical characterisation of mixed-mode toughness of thermoplast/glass interfaces
361
Fracture mechanical evaluation of an in-vessel melt retention scenario
362
Fracture mechanical evaluation of the effects of grinding residual stresses on bending strength of ceramics
363
Fracture mechanical evaluation of the effects of grinding residual stresses on bending strength of ceramics
364
Fracture mechanical investigations and cohesive zone failure modelling on automotive composites
365
Fracture mechanics
366
Fracture mechanics : 25th Volume. Edited by F. Erdogan. ASTM STP 1220, American Society for Testing and Materials, 1995, ISSN 1040-3094, £112 (approx. 707 pp.). Available in Europe exclusively from American Technical Publishers Ltd, Wilbury Way, Hitchin,
367
Fracture mechanics analyses including constraint investigations on reactor pressure vessels under pressurized thermal shock loading Original Research Article
368
Fracture mechanics analysis and evaluation for the RPV of the Chinese Qinshan 300 MW NPP under PTS
369
Fracture mechanics analysis and evaluation for the RPV of the Chinese Qinshan 300 MW NPP under PTS Original Research Article
370
Fracture mechanics analysis for inhomogeneous material behaviour Original Research Article
371
Fracture mechanics analysis for residual stress and crack closure corrections
372
Fracture mechanics analysis including the butt joint geometry for the superconducting conductor conduit of the National Centralized Tokamak
373
Fracture Mechanics Analysis of Cracked Wedges Under Various Varying Distributed Loadings
374
Fracture mechanics analysis of cracking in plain and reinforced concrete using the boundary element method
375
Fracture mechanics analysis of curved stiffened panels using BEM
376
Fracture Mechanics Analysis of Fourth Lumbar Vertebra in Method of Finite Element Analysis
377
Fracture mechanics analysis of geometrically nonlinear shear deformable plates
378
Fracture mechanics analysis of solder joint intermetallic compounds in shear test
379
Fracture mechanics analysis of the effect of substrate flexibility on solder joint reliability
380
Fracture mechanics analysis of the effects of temperature and material mismatch on the Smart-Cut® technology
381
Fracture mechanics analysis of thermally tempered glass plate: fracture induced by an embedded crack
382
Fracture mechanics analysis of thin coatings under plane-strain indentation
383
Fracture mechanics analysis on the bonded repair of a skin/stiffener with an inclined central crack
384
Fracture mechanics and damage mechanics based fatigue lifetime prediction of adhesively bonded joints subjected to variable amplitude fatigue
385
FRACTURE MECHANICS AND FATIGUE: A HISTORICAL PERSPECTIVE
386
Fracture mechanics and materials testing: forgotten pioneers of the early 20th century
387
Fracture mechanics and microstructure in NiTi shape memory alloys Original Research Article
388
Fracture mechanics and notch sensitivity
389
Fracture mechanics and scale effects in the fatigue of railway axles
390
FRACTURE MECHANICS APPLICATIONS TO DRILLING AND BLASTING
391
Fracture mechanics approach for flexural strengthening of reinforced concrete beams
392
Fracture mechanics approach to facesheet delamination in honeycomb: measurement of energy release rate of the adhesive bond
393
Fracture mechanics approach to fretting fatigue and problems to be solved
394
Fracture mechanics assessment of railway axles: Experimental characterization and computation
395
Fracture mechanics assessment of stress concentrations in incomplete fretting contacts
396
Fracture mechanics based approach to fatigue analysis of welded joints
397
Fracture mechanics based design of a railway wheel made of austempered ductile iron
398
Fracture mechanics based fatigue analysis of steel bridge decks by two-level cracked models
399
Fracture mechanics based fretting fatigue life predictions in Ti–6Al–4V
400
Fracture mechanics behavior of a NiFe superalloy sheath for superconducting fusion magnets. Part 1. property measurements
401
Fracture mechanics behavior of a NiFe superalloy sheath for superconducting fusion magnets. Part 2. magnet life analysis model
402
Fracture mechanics behavior of the T91 martensitic steel in contact with liquid lead–bismuth eutectic for application in an accelerator driven system
403
Fracture mechanics characterisation of effects of stabilisers on creep crack growth in polyethylene pipes
404
Fracture mechanics characterization of an anisotropic geomaterial
405
Fracture mechanics concepts for evaluation of irradiated reactor pressure vessel material behavior
406
Fracture mechanics concepts for evaluation of irradiated reactor pressure vessel material behavior
407
Fracture mechanics concepts for evaluation of irradiated reactor pressure vessel material behavior Original Research Article
408
Fracture mechanics evaluation of a 0.5Mo carbon steel subjected to high temperature hydrogen attack
409
Fracture mechanics evaluation of a crack generated in SiC/SiC composite first wall
410
Fracture mechanics evaluation of cast duplex stainless steel after thermal aging
411
Fracture mechanics evaluation of cast duplex stainless steel after thermal aging
412
Fracture mechanics evaluation of cast duplex stainless steel after thermal aging Original Research Article
413
Fracture mechanics evaluation of optical fibers
414
Fracture mechanics evaluation of small diameter piping considering the latest experimental results
415
Fracture mechanics evaluation of small diameter piping considering the latest experimental results Original Research Article
416
Fracture mechanics for a Mode I crack in piezoelectric materials
417
Fracture mechanics for a mode III crack in a piezoelectric materia
418
Fracture mechanics for the reconstruction of Noto Cathedral
419
Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)
420
Fracture mechanics in aircraft failure analysis: Uses and limitations
421
Fracture mechanics in creep situation interpretation of results on a test specimen Original Research Article
422
Fracture mechanics in fatigue calculations as the assistance in structural design. Case study
423
Fracture mechanics in railway applications––an overview
424
Fracture mechanics interpretation of thin spray-on liner adhesion tests
425
Fracture mechanics investigation regarding the effects of cracks on the structural integrity of a BWR-core shroud
426
Fracture mechanics investigation regarding the effects of cracks on the structural integrity of a BWR-core shroud
427
Fracture mechanics investigation regarding the effects of cracks on the structural integrity of a BWR-core shroud Original Research Article
428
Fracture Mechanics Model Applied to Shear Failure of Reinforced Concrete Beams without Stirrups
429
Fracture mechanics modeling using images of fracture surface
430
Fracture mechanics of air-entrained concrete subjected to compression
431
Fracture Mechanics of ASR in Concretes with Waste Glass Particles of Different Sizes
432
Fracture mechanics of composites with residual stresses, imperfect interfaces, and traction-loaded cracks
433
Fracture mechanics of concrete and concrete structures 4th International FraMCoS Conference, held in Cachan, France, from May 28 to June 1, 2001
434
Fracture mechanics of diamond-like carbon (DLC) films coated on flexible polymer substrates
435
Fracture mechanics of flanged reinforced concrete sections
436
Fracture mechanics of hydroxyapatite single crystals under geometric confinement
437
Fracture mechanics of impacted laminated glass subjected to various fatigue stressing conditions
438
Fracture Mechanics of Marble Using a Splitting Tension Test
439
Fracture mechanics of mining dragline booms
440
Fracture mechanics of piezoelectric materials – Where are we right now?
441
Fracture mechanics of plate debonding: Validation against experiment
442
Fracture mechanics of reactive powder concrete: material modelling and experimental investigations
443
Fracture mechanics of Sigma SM1140+ fibre
444
Fracture mechanics of stainless steel foams
445
Fracture mechanics parameters and finite element and boundary element methods — A bibliography (1992–1994)
446
Fracture mechanics principles
447
Fracture mechanics study on the intermetallic compound cracks for the solder joints of electronic packages
448
Fracture mechanics testing on specimens with low constraint––standardisation activities within ISO and ASTM
449
Fracture mechanics using a 3D composite element
450
Fracture mechanics using a 3D composite element
451
Fracture Mechanics, An Introduction (Second Edition)
452
Fracture Mechanics, Crack Propagation and Microhardness Studies on Flux Grown ErAlO3 Single Crystals
453
Fracture mechanics-based design and reliability assessment of fillet welded cylindrical joints under tension and torsion loading
454
Fracture mechanics-based life prediction of a riveted lap joint
455
Fracture mechanism in bitumen, modified bitumen and asphalt mixes
456
Fracture Mechanism in Plastic Sheet Materials
457
Fracture mechanism maps in unirradiated and irradiated metals and alloys
458
Fracture mechanism of a dissimilar metal welded joint in nuclear power plant
459
FRACTURE MECHANISM OF BORATED STAINLESS STEEL
460
Fracture Mechanism of CoCrMo Porous Nanocomposite Prepared by Powder Metallurgy Route
461
Fracture mechanism of FeAl matrix composites with discontinuous ceramic reinforcements
462
Fracture mechanism of FeAl matrix composites with discontinuous ceramic reinforcements
463
Fracture mechanism of flexible graphite sheets Original Research Article
464
Fracture mechanism of metal electrode integrated on a chip and fabrication of a poly(ethylene terephthalate) electrophoresis microchip
465
Fracture mechanism of Mg–3Al–1Zn sheet at the biaxial state with respect to forming temperatures
466
Fracture mechanism of Ni3Al alloys and their composites with ceramic particles at elevated temperatures
467
Fracture mechanism of scandia-doped zirconia Original Research Article
468
Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading
469
Fracture mechanisms and fracture mechanics at ultrasonic frequencies
470
Fracture mechanisms and fracture toughness in semicrystalline polymer nanocomposites
471
Fracture mechanisms and size effects of brittle metallic foams: In situ compression tests inside SEM
472
Fracture mechanisms in biopolymer films using coupling of mechanical analysis and high speed visualization technique
473
Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization
474
Fracture mechanisms in sintered steels with 3.5%(wt.) Mo
475
Fracture mechanisms in sintered steels with 3.5%(wt.) Mo
476
Fracture mechanisms induced in a brittle material by a hard cutting indenter
477
Fracture mechanisms of aluminium alloy AA7075-T651 under various loading conditions
478
Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes
479
Fracture mechanisms of epoxy-based ternary composites filled with rigid-soft particles
480
Fracture mechanisms of Hg0.8Cd0.2Te induced by pulsed TEA-CO2 laser
481
Fracture mechanisms of offset rock joints-A laboratory investigation
482
Fracture mechanisms of retrieved titanium screw thread in dental implant
483
Fracture mechanisms of the Strombus gigas conch shell: II-micromechanics analyses of multiple cracking and large-scale crack bridging Original Research Article
484
Fracture mechanisms under monotonic and non-monotonic low Lode angle loading
485
Fracture micromechanisms of bioabsorbable PLLA/PCL polymer blends
486
Fracture mirror of optical fibers
487
Fracture mode analysis and related surface deformation during dyke intrusion: Results from 2D experimental modelling
488
Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features
489
Fracture mode transition phenomena in steels as a consequence of the change of operating deformation mode
490
Fracture mode transition phenomena in steels as a consequence of the change of operating deformation mode
491
Fracture Model for a Thin Layer of a Fibrous Composite
492
Fracture Model for Flexural Failure of Beams Retrofitted with CARDIFRC
493
Fracture modeling of isotropic functionally graded materials by the numerical manifold method
494
Fracture modeling using a micro-structural mechanics approach––I. Theory and formulation
495
Fracture modeling using a microstructural mechanics approach––II. Finite element analysis
496
Fracture modelling of WC-Co hardmetals using crystal plasticity theory and the Gurson model
497
Fracture Modes in a Binary Titanium Alloy
498
Fracture modes in fiber networks
499
Fracture modes in tubular LSFCO ceramic membranes under graded reducing conditions
500
Fracture modes of HAYNES® 230® alloy during fatigue-crack-growth at room and elevated temperatures
501
Fracture modes of HAYNES® 230® alloy during fatigue-crack-growth at room and elevated temperatures
502
Fracture morphology and deformation characteristics of repeatedly impacted thermoplastic matrix composites
503
Fracture morphology pattern transition dominated by the crack tip curvature radius in brittle metallic glasses
504
Fracture network evaluation program (FraNEP): A software for analyzing 2D fracture trace-line maps
505
Fracture network modeling conditioned to pressure transient and tracer test dynamic data
506
Fracture networks and fluid transport in active fault zones
507
Fracture networks and hydrate distribution at Hydrate Ridge, Oregon
508
Fracture Non-union: A Review of Clinical Challenges and Future Research Needs
509
Fracture of 6056 aluminum sheet materials: effect of specimen thickness and hardening behavior on strain localization and toughness
510
Fracture of 6056 aluminum sheet materials: effect of specimen thickness and hardening behavior on strain localization and toughness
511
Fracture of a compressor rotor made from grey cast iron
512
Fracture of a ductile layer constrained by stiff substrates
513
Fracture of a fatty acid multilayer film
514
Fracture of a Liquefied Crack and the Physics of Rayleigh Waves
515
Fracture of a piezoelectric fiber/elastic matrix composite
516
FRACTURE OF A PIEZOELECTRIC MATERIAL STRIP UNDER STEADY STATE THERMAL LOAD
517
Fracture of a rectangular piezoelectromagnetic body
518
Fracture of a ridged multi-year Arctic sea ice floe
519
Fracture of a sirolimus-eluting stent with migration
520
Fracture of a Superplate: The Proximal Cause of the Hawaiian-Emperor Seamount Bend?
521
Fracture of a textured anisotropic ceramic Original Research Article
522
Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading
523
Fracture of aluminium alloy 2024 under biaxial and triaxial loading
524
Fracture of aluminium foam core sacrificial cladding subjected to air-blast loading
525
Fracture of aluminium reinforced with densely packed ceramic particles: influence of matrix hardening Original Research Article
526
Fracture of aluminium reinforced with densely packed ceramic particles: link between the local and the total work of fracture Original Research Article
527
Fracture of an aircraftʹs landing gear
528
Fracture of an automobile anti-roll bar
529
Fracture of an isotropic medium strengthened with a regular system of stringers
530
Fracture of anodic-bonded silicon-thin film glass-silicon triple stacks
531
Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes
532
Fracture of bicrystal metal/ceramic interfaces: A study via the mechanism-based strain gradient crystal plasticity theory
533
Fracture of bone tissue: The ‘hows’ and the ‘whys’
534
Fracture of brittle materials: effects of test method and threshold stress on the Weibull modulus
535
Fracture of cold jointed concrete interfaces
536
Fracture of Colvin-Galloway Future Band Causing a Tear in the Anterior Mitral Leaflet
537
Fracture of components with V-shaped notches
538
Fracture of composite alumina/yttria-stabilized zirconia joints
539
Fracture of concrete and rock editorial
540
Fracture of concrete materials and structures
541
Fracture of concrete structure using simplified meshless method
542
FRACTURE OF CONNECTIONS BETWEEN STEEL AND REINFORCED CONCRETE SHEAR WALLS UNDER THE CYCLIC LOADING
543
Fracture of convoluted and lamellar α2 + γ TiAl alloys
544
Fracture of cutting tools due to the formation of untempered martensite
545
Fracture of discontinuous wood-adhesive bonds
546
Fracture of ECAP-deformed iron and the role of extrinsic toughening mechanisms Original Research Article
547
Fracture of elastomers by cavitation
548
Fracture of elastomers under static
549
Fracture of electrostrictive solids subjected to combined mechanical and electric loads
550
Fracture of Fe–3 wt.% Si single crystals
551
Fracture of FeNiB-NiP amorphous bilayer ribbon
552
Fracture of FeNiB-NiP amorphous bilayer ribbon
553
Fracture of filaments and its influence on critical current and residual strength of fatigued Nb–Ti/Cu superconducting composite Original Research Article
554
Fracture of functionally graded materials
555
Fracture of high carbon high strength anchor rods
556
Fracture of high performance fibres
557
Fracture of high volume fraction ceramic particle reinforced aluminium under multiaxial stress Original Research Article
558
Fracture of Magnesium Alloy in Cold Forging
559
Fracture of Materials: Moving Forwards
560
Fracture of metal/ceramic interfaces
561
Fracture of metallic glasses at notches: Effects of notch-root radius and the ratio of the elastic shear modulus to the bulk modulus on toughness Original Research Article
562
Fracture of model concrete: 1. Types of fracture and crack path
563
Fracture of model concrete: 2. Fracture energy and characteristic length
564
Fracture of multilayer oxide composites
565
Fracture of multilayer oxide composites
566
Fracture of nanostructured Sn/C anodes during Li-insertion
567
Fracture of nickel–titanium superelastic alloy in sodium hypochlorite solution
568
Fracture of nickel–titanium superelastic alloy in sodium hypochlorite solution
569
Fracture of nitrided and nitrocarburized blunt notch three-point bending die steel specimens
570
Fracture of notched round-bar NiTi-specimens
571
Fracture of open- and closed-cell metal foams
572
Fracture of open cell copper foams under tension
573
Fracture of organosilicate glass thin films: environmental effects
574
Fracture of organosilicate glass thin films: environmental effects
575
Fracture of ossified Achilles tendon
576
Fracture of piezoelectromagnetic materials
577
Fracture of Plain and Fiber-Reinforced Concrete Slabs under Monotonic Loading
578
Fracture of plasma-sprayed thick thermal barrier coatings under multiaxial stress states
579
Fracture of polybutylene terephthalate (PBT) film
580
Fracture of polycrystalline Fe−2.3%V−0.12%P alloy
581
Fracture of polycrystalline silicon
582
Fracture of polymer blends: Effect of characteristic number of interfacial entanglements and matrix toughness
583
Fracture of polymer gels
584
Fracture of Polymethylmethacrylate under Pulse Loading Conditions
585
Fracture of porous materials – Influence of the pore size
586
Fracture of prismatic aluminum tubes under reverse straining
587
Fracture of quasi-isotropic composite sheets with sharp notches
588
Fracture of random matrix-inclusion composites: scale effects and statistics
589
Fracture of reinforcing steels in concrete damaged by ASR
590
Fracture of Scantling Support Structure of Gas Processing Module on FPSO
591
Fracture of shape memory CuAlNi single crystals
592
Fracture of silicon-rich particles during sliding contact of Al–Si alloys
593
Fracture of steel moment connections in the Northridge earthquake
594
Fracture of steel moment connections in the Northridge earthquake
595
Fracture of Supracondylar Process of the Humerus (Case Report)
596
Fracture of sustained tensile-loaded Ti–0.2% Pd alloy in acid and neutral fluoride solutions
597
Fracture of the cervical spine. Operative results and neurological outcome
598
Fracture of the coracoid process, the greater tuberosity, and the glenoid rim after acute first-time anterior shoulder dislocation: A case report
599
Fracture of the delicate bamboo: a diagnostic pitfall
600
Fracture of the lateral process of the talus associated with snowboarding
601
Fracture of the radial head with ulnar collateral ligament rupture
602
Fracture of the scapular body: Functional outcome after conservative treatment
603
Fracture of the tibia: Complication of bone grafting to the anterior maxilla
604
Fracture of the winter sea ice cover on the Arctic ocean
605
Fracture of the Wrist and Incidence of the Complex Regional Pain Syndrome Type 1: A Case Series Study
606
Fracture of thermally activated NiTi shape memory alloy wires
607
Fracture of thin cast slabs of Al–Sn alloys during cold rolling
608
Fracture of tooth enamel from incipient microstructural defects
609
Fracture of Two-Layer Plates with Cracks in Tension with Regard for Local Buckling
610
Fracture of underwater notched structures
611
Fracture of U-notched specimens under mixed mode: Experimental results and numerical predictions
612
Fracture of Zircaloy-4 cladding tubes with or without hydride blisters in uniaxial to plane strain conditions with standard and optimized expansion due to compression tests
613
Fracture orientation and induced anisotropy of gas hydrate-bearing sediments in seismic chimney-like-structures of the Ulleung Basin, East Sea
614
Fracture orientation characterization: Minimizing statistical modelling errors
615
Fracture orientation characterization: Minimizing statistical modelling errors
616
Fracture parameters at bi-material ceramic interfaces under bi-axial state of stress
617
Fracture Parameters for Cracked Cylindrical Shells
618
Fracture parameters for high-performance concrete
619
Fracture parameters of a penny-shaped crack at the interface of a piezoelectric bi-material system
620
Fracture parameters of ferroelectric ceramics connected with the roughness of the edges of the crack and its deflection
621
Fracture parameters of interfacial crack of bimaterial under the impact loading
622
Fracture paths and ultrananocrystalline diamond
623
Fracture pattern of Thjَrsلrdalur central volcano with respect to rift-jump and a migrating transform zone in South Iceland
624
Fracture patterns at lava–ice contacts on Kokostick Butte, OR, and Mazama Ridge, Mount Rainier, WA: Implications for flow emplacement and cooling histories
625
Fracture patterns of the growth plate and surrounding bone in the ovine knee joint at different ages
626
Fracture penetration in planetary ice shells
627
Fracture performance of clay/epoxy nanocomposites with clay surface-modified using 3-aminopropyltriethoxysilane
628
Fracture permeability and water–rock interaction in a shallow volcanic groundwater reservoir and the concern of its interaction with the deep geothermal reservoir of Mt. Amiata, Italy
629
Fracture phenomena of microdrills in static and dynamic conditions
630
Fracture porosity in the décollement zone of Nankai accretionary wedge using Logging While Drilling resistivity data
631
Fracture prediction for piezoelectric ceramics based on the electric field saturation concept
632
Fracture prediction in 4-point bending of an extruded aluminum panel
633
Fracture prediction of a 3D C/C material under impact
634
Fracture prediction of cardiac lead medical devices using Bayesian networks
635
Fracture prediction of cardiac lead medical devices using Bayesian networks
636
Fracture prediction of hole patterns with multiple cracks using the finite element method
637
Fracture prediction of thin plates under hemi-spherical punch with calibration and experimental verification
638
Fracture prediction of thin plates under hemi-spherical punch with calibration and experimental verification
639
Fracture prediction of thin plates under hemi-spherical punch with calibration and experimental verification
640
Fracture prediction of thin plates under localized impulsive loading. Part I: dishing
641
Fracture prediction of thin plates under localized impulsive loading. Part II: discing and petalling
642
Fracture prevalence and relationship to endocrinopathy in iron overloaded patients with sickle cell disease and thalassemia
643
Fracture Process in ± θ Laminates Subjected to Mode II Loading
644
Fracture process zone in granite: a microstructural analysis
645
Fracture process zone in notched concrete beam under three-point bending by acoustic emission
646
Fracture process zone size and true fracture energy of concrete using acoustic emission
647
Fracture processes studied in CRESST
648
Fracture processes studied in CRESST
649
Fracture Propagation Characteristic and Micromechanism of Rock-Like Specimens under Uniaxial and Biaxial Compression
650
Fracture properties evaluation of carbon steel piping for main steam line Original Research Article
651
Fracture properties of (CeO2)1−x(RO1.5)x (R = Y, Gd, and Sm; x = 0.02–0.20) ceramics
652
Fracture properties of bamboo
653
Fracture properties of concrete reinforced with steel-polypropylene hybrid fibres
654
Fracture properties of concrete reinforced with steel–polypropylene hybrid fibres
655
Fracture properties of Fe–40 at.% Al matrix composites reinforced with ceramic particles and fibers
656
Fracture properties of Fe–40 at.% Al matrix composites reinforced with ceramic particles and fibers
657
Fracture properties of growth plate cartilage compared to cortical and trabecular bone in ovine femora
658
Fracture properties of high performance steels and their welds
659
Fracture properties of high-purity V–4Cr–4Ti alloy (NIFS-HEAT-2) at room temperature
660
Fracture properties of hydrided Zircaloy-4 cladding in recrystallization and stress-relief anneal conditions
661
Fracture properties of hydrogenated amorphous silicon carbide thin films Original Research Article
662
Fracture properties of interfacially doped Nb-A12O3 bicrystals: I, fracture characteristics Original Research Article
663
Fracture properties of interfacially doped Nb-Al2O3 bicrystals: II, relation of interfacial bonding, chemistry and local plasticity Original Research Article
664
Fracture properties of multiphase alloy MP35N
665
Fracture properties of nickel-based anodes for solid oxide fuel cells
666
Fracture properties of notched and pre-cracked specimens of a tempered martensitic steel at low temperature
667
Fracture properties of SiC ceramics with oxynitride additives
668
Fracture properties of sintered UO2 ceramic pellets with duplex microstructure
669
Fracture properties of spray-dried powder compacts: Effect of granule size
670
Fracture range detection in hydro-abrasive erosion of concrete
671
Fracture rate in Thoroughbred racehorses is affected by dam age and parity
672
Fracture R-curve characterization of toughened epoxy adhesives
673
Fracture R-curve of a toughened epoxy adhesive as a function of irreversible degradation
674
Fracture reasons investigation of turning rack component in vehicle
675
Fracture reliability of a typical Northridge steel moment resisting connection
676
Fracture repair: Modulation of fracture-callus and mechanical properties by sequential application of IL-6 following PTH 1–34 or PTH 28–48
677
Fracture resistance and cuspal deflection of incompletely excavated teeth
678
Fracture resistance and cuspal deflection of incompletely excavated teeth
679
Fracture Resistance and Failure Mode of Endodontically Treated Premolars Restored with Different Adhesive Restorations
680
Fracture Resistance and Failure Mode of Endodontically Treated Premolars Restored with Different Adhesive Restorations
681
Fracture resistance and failure modes of CEREC endo-crowns and conventional post and core-supported CEREC crowns
682
Fracture resistance and failure patterns of endodontically treated mandibular molars with and without glass fiber post in combination with a zirconia–ceramic crown
683
Fracture resistance and marginal discrepancy of porcelain laminate veneers influenced by preparation design and restorative material in vitro
684
Fracture resistance and marginal discrepancy of porcelain laminate veneers influenced by preparation design and restorative material in vitro
685
Fracture resistance behavior of alumina–zirconia composites
686
Fracture resistance curve behavior of multilayered alumina–zirconia composites produced by centrifugation Original Research Article
687
Fracture resistance curve over the complete mixed-mode I and II range for 5083 aluminum alloy
688
Fracture resistance curves and toughening mechanisms in polymer based dental composites
689
Fracture resistance estimation of elastic ceramics in edge flaking: EF baseline
690
Fracture resistance evaluation of RuO2-based thick film resistor material by in situ crack extension observation in a scanning electron microscope Original Research Article
691
Fracture resistance improvement of polypropylene by joint action of core–shell particles and nucleating agent
692
Fracture Resistance of a Bulk-Fill and a Conventional Composite and the Combination of Both for Coronal Restoration of Severely Damaged Primary Anterior Teeth
693
Fracture resistance of a cracked concrete beam post-strengthened with FRP sheets
694
Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature
695
Fracture resistance of all ceramic crowns supported by zirconia and alumina versus titanium implant abutments
696
Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering
697
Fracture resistance of aluminum multilayer composites
698
Fracture resistance of amalgam/glass-polyalkenoate open sandwich Class II restorations: An in vitro study
699
Fracture resistance of asphalt concrete under different loading modes and temperature conditions
700
Fracture resistance of atmospheric plasma sprayed thermal barrier coatings
701
Fracture Resistance of Ceramics upon Edge Chipping
702
Fracture resistance of ceramics: Base diagram and R-line
703
Fracture Resistance of Ceramics: Edge Fracture Method
704
Fracture resistance of class II preformed ceramic insert and direct composite resin restorations
705
Fracture Resistance of Composite Fixed Partial Dentures Reinforced with Pre-impregnated and Non-impregnated Fibers
706
Fracture resistance of cracked duplex stainless steel elbows under bending with or without internal pressure
707
Fracture resistance of cracked duplex stainless steel elbows under bending with or without internal pressure Original Research Article
708
Fracture resistance of dentin-composite interfaces using different adhesive resin layers
709
Fracture resistance of different implant supported ceramic abutment/crown systems
710
Fracture resistance of different metal substructure designs for implant-supported porcelain-fused-to-metal (PFM) crowns
711
Fracture Resistance of Endodontically Treated Anterior Teeth Restored with Different Post Systems: An in Vitro Study
712
Fracture resistance of endodontically treated premolars restored with bulk‑fill composite resins: The effect of fiber reinforcement
713
Fracture resistance of endodontically treated roots using different preparation-obturation combinations
714
Fracture resistance of endodontically treated teeth restored with or without post systems
715
Fracture Resistance of Endodontically Treated Teeth Restored with Ormocer and Nanofill Composite Resins
716
Fracture resistance of endodontically treated teeth restored with Zirconia filler containing composite core material and fiber posts
717
Fracture Resistance of Endodontically-treated Maxillary Premolars Restored with Composite Resin along with Glass Fiber Insertion in Different Positions
718
Fracture resistance of immature teeth filled with mineral trioxide aggregate or calcium-enriched mixture cement: An ex vivo study
719
Fracture resistance of implant-supported screw- versus cement-retained porcelain fused to metal single crowns: SEM fractographic analysis
720
Fracture Resistance of Maxillary Primary Anterior Restorations Using Grandio and Grandio Flow Composites with Two Different Types of Posts: An In Vitro Study
721
Fracture resistance of mechanically compromised premolars restored with polyethylene fiber and adhesive materials
722
Fracture resistance of mineral reinforced polyamide 6
723
Fracture Resistance of over Flared Endodontically Treated Central Incisors Restored with Multiple Prefabricated and Custom-Made Glass Fiber Posts
724
Fracture resistance of overtly flaring root canals filled with resin‑based obturation material
725
Fracture Resistance of Pine Nut to Compressive Loading
726
Fracture resistance of premolars teeth restored by silorane, nanohybrid and two types of fiber‑reinforced composite: an in‑vitro study
727
Fracture resistance of pulpless teeth restored with post-cores and crowns
728
Fracture resistance of pulpotomized and composite‑restored primary molars: Incremental versus bulk‑fill techniques
729
Fracture Resistance of Pulpotomized Primary Molars Re-stored with Extensive Class II Amalgam Restorations
730
Fracture resistance of reattached incisor fragments with mini fibre-reinforced composite anchors
731
Fracture resistance of reattached incisor fragments with mini fibre-reinforced composite anchors
732
Fracture resistance of rehabilitated flared root canals with anatomically adjustable fiber post
733
Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
734
Fracture Resistance of Root Canals Obturated with Gutta-Percha versus Resilon with Two Different Techniques
735
Fracture resistance of root-filled teeth after cavity preparation with conventional burs, Er: YAG and Er,Cr: YSGG lasers
736
Fracture Resistance of Roots after Application of Different Sealers
737
Fracture resistance of roots enlarged with various rotary systems and obturated with different sealers
738
Fracture Resistance of Roots Filled With Bio-Ceramic and Epoxy Resin-Based Sealers: In Vitro Study
739
Fracture resistance of roots obturated with a single expandable polymer cone
740
Fracture Resistance of Roots Restored with Four Different Fiber-Reinforced Composite Posts
741
Fracture resistance of short, randomly oriented, glass fiber-reinforced composite premolar crowns
742
Fracture Resistance of Simulated Immature Teeth Obturated with GuttaPercha or Resilon and Reinforced by Composite or Post
743
Fracture resistance of structurally compromised and normal endodontically treated teeth restored with different post systems: An in vitro study
744
Fracture resistance of structurally compromised premolar roots restored with single and accessory glass or quartz fiber posts
745
Fracture resistance of sunflower seed and kernel to compressive loading Original Research Article
746
Fracture resistance of teeth restored with dentin-bonded crowns constructed in a leucite-reinforced ceramic
747
Fracture Resistance of Teeth Restored with Direct and Indirect Composite Restorations
748
Fracture resistance of three different posts in restoration of severely damaged primary anterior teeth: An in vitro study
749
Fracture Resistance of Unsplit Pistachio (Pistacia vera L.) Nuts against Splitting Force, under Compressive Loading
750
Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing
751
Fracture Resistance of Zirconia Restorations with a Modified Framework Design
752
Fracture Resistance of Zirconia Restorations with Four Different Framework Designs
753
Fracture resistance of Zr–Nb alloys under low-cycle fatigue tests
754
Fracture resistant properties of AerMet steels
755
Fracture response of externally flawed aluminum cylindrical shells under internal gaseous detonation loading
756
Fracture risk after surgery for peptic ulcer disease: a population-based cohort study
757
Fracture Risk in Men With Congestive Heart Failure: Risk Reduction With Spironolactone Original Research Article
758
Fracture Risk in Patients with Celiac Disease, Crohn’s Disease, and Ulcerative Colitis: A Nationwide Follow-up Study of 16,416 Patients in Denmark
759
Fracture risk in users of oral anticoagulants: A nationwide case-control study
760
Fracture Risk Increases After Breast Or Other Cancer Diagnosis
761
Fracture risk of lithium-disilicate ceramic inlays: A finite element analysis
762
Fracture risk reduction during treatment with teriparatide is independent of pretreatment bone turnover
763
Fracture risks related to certain factors by site of fracture among perimenopausal women
764
Fracture roughness and thermal exchange: A case study at Soultz-sous-Forêts
765
Fracture roughness scaling and its correlation with grain boundary network structure Original Research Article
766
Fracture sampling on a cylinder: From scanlines to boreholes and tunnels
767
Fracture saturation and critical thickness in layered materials
768
Fracture scaling relations for scratch tests of axisymmetric shape
769
Fracture sealing in zircon as evaluated by electron microprobe analyses and back-scattered electron imaging
770
Fracture simulation of CFRP laminates in mixed mode bending
771
Fracture simulation of pre-cracked heterogeneous asphalt mixture beam with movable three-point bending load
772
Fracture simulations via large-scale nonequilibrium molecular dynamics
773
Fracture site augmentation with calcium phosphate cement reduces screw penetration after open reduction–internal fixation of proximal humeral fractures
774
Fracture spacing in layered rocks: a new explanation based on the stress transition
775
Fracture statistics in the three-dimensional random fuse model
776
Fracture statistics modeling of laminate composites
777
Fracture statistics of ceramic laminates strengthened by compressive residual stresses
778
Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statistics
779
Fracture statistics of dental ceramics: Discrimination of strength distributions
780
Fracture step structure: geometrical characterization and effects on fluid flow and breakthrough curve
781
Fracture stiffness measurement in tibial shaft fractures: a non-invasive method
782
Fracture stiffness measurement using the orthometer: reproducibility and sources of error
783
Fracture stimulation fundamentals
784
Fracture strength and behavior of carbon steel pipes with local wall thinning subjected to cyclic bending load Original Research Article
785
Fracture strength and bending of all-ceramic and fiber-reinforced composites in inlay-retained fixed partial dentures
786
Fracture Strength and Bending of Fiber-Reinforced Composites and Metal Frameworks in Fixed Partial Dentures
787
Fracture strength and bond capacities of electron irradiated fiber reinforced composites
788
Fracture strength and damage progression of the fiber/matrix interfaces in titanium-based MMCs with different interfacial layers
789
Fracture strength and fatigue resistance of dental resin-based composites
790
Fracture strength and fracture patterns of root filled teeth restored with direct resin restorations
791
Fracture strength and fracture patterns of root filled teeth restored with direct resin restorations
792
Fracture strength and survival rate of endodontically treated maxillary incisors with approximal cavities after restoration with different post and core systems: an in-vitro study
793
Fracture strength distribution of porous ceramics under quasi-static load
794
Fracture strength estimation of SiC block for IS process
795
Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures
796
Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain Original Research Article
797
Fracture strength of carbon fiber under combined torsional and tensile loading
798
Fracture strength of direct versus indirect laminates with and without fiber application at the cementation interface
799
Fracture Strength of Endodontically Treated Teeth Restored with Casting Post and Core and Glass-Fiber with Composite Core
800
Fracture Strength of Flared Root Canals Restored with Different Post Systems
801
Fracture strength of flawed cylindrical pressure vessels under cryogenic temperatures Original Research Article
802
Fracture strength of ion-exchange silicate-containing dental glass ceramics
803
Fracture strength of machined ceramic crowns as a function of tooth preparation design and the elastic modulus of the cement
804
Fracture strength of mesiobuccal roots following canal preparation with hand and rotary instrumentation: An in vitro study
805
Fracture strength of micro-tubular solid oxide fuel cell anode in redox cycling experiments
806
Fracture strength of prefabricated all-ceramic posterior inlay-retained fixed dental prostheses
807
Fracture Strength of Severely Damaged Primary Anterior Teeth after Restoration with Composite Resin and Resin-Modified Glass Ionomer Cement
808
Fracture strength of teeth restored with fiber post and apical plug
809
Fracture strength of temporary fixed partial dentures: CAD/CAM versus directly fabricated restorations
810
Fracture strength of tensile loaded graphite-epoxy laminates containing cracks and circular holes
811
Fracture strength of tensile loaded graphite-epoxy laminates containing cracks and circular holes
812
Fracture Strength of Three-Unit Implant Supported Fixed Partial Dentures with Excessive Crown Height Fabricated from Different Materials
813
Fracture strength of tourmaline and epidote by three-point bending test: application to microboudin method for estimating absolute magnitude of palaeodifferential stress
814
Fracture strength of various lay-ups of carbon/epoxy laminates using the modified inherent flaw model
815
Fracture strength of welded aluminium joints in commercial road vehicles
816
Fracture studies of poly(propylene)/elastomer blend with β-form nucleating agent
817
Fracture studies of selected dental restorative composites
818
Fracture studies on 3D geometrically similar beams
819
Fracture study of a horizontal well in a tight reservoir — Kuwait
820
Fracture study of aluminum composite coatings produced by the kinetic spray method
821
Fracture study of organic–inorganic coatings using nanoindentation technique
822
Fracture study of the composite using essential work of fracture method: PP–SEBS–g–MA/E1 clay
823
Fracture surface analysis on nano-SiO2/epoxy composite
824
FRACTURE SURFACE DEVELOPMENT IN AN OVERLOADED D16T Al-ALLOY SUBJECTED TO BIAXIAL LOADING. A FRACTOGRAPHIC ANALYSIS
825
Fracture surface examination of dental ceramics using fractal analysis
826
Fracture surface morphology of compressed bulk metallic glass-matrix-composites and bulk metallic glass
827
Fracture surface of plastic materials: the roughness exponent
828
Fracture surface roughness and roughness-induced fatigue crack closure in Ti-2.5 wt% Cu
829
Fracture surface roughness and roughness-induced fatigue crack closure in Ti-2.5 wt% Cu
830
Fracture surface topography analysis (FRASTA)—Development, accomplishments, and future applications
831
Fracture surface topography analysis of in-beam fatigue behavior for 20% cold-worked 316 stainless steel
832
Fracture surface topography and fracture mechanism in austenitic SUS316 steel plates fatigued by repeated bending
833
Fracture surfaces and compressive strength of hydrated cement pastes
834
Fracture surfaces and the associated failure mechanisms in ductile iron with different matrices and load bearing
835
Fracture Surgery in Known COVID-19 Infected Patients: What Are the Challenges?
836
Fracture susceptibility of worn teeth
837
Fracture system related to geothermal reservoir based on core samples of slim holes. Example from the Uenotai geothermal field, northern Honshu, Japan
838
Fracture systems and dissolution cavities in Wadi As Sir Formation, Thughrat Asfour area, Jordan
839
Fracture systems in normal fault zones crosscutting sedimentary rocks, Northwest German Basin
840
Fracture termination and step-over at bedding interfaces due to frictional slip and interface opening
841
Fracture test of thin sheet electrolytes for solid oxide fuel cells
842
Fracture testing of the heat affected zone from welded steel pipes using an in situ stage
843
Fracture testing of welded single edge notch tensile specimens
844
Fracture tests of microsized TiAl specimens
845
Fracture tolerance of reaction wood (yew and spruce wood in the TR crack propagation system)
846
Fracture toughening mechanism of cortical bone: An experimental and numerical approach
847
Fracture toughening mechanism of shape memory alloys due to martensite transformation
848
Fracture toughening mechanism of shape memory alloys under mixed-mode loading due to martensite transformation
849
Fracture toughness (J1C) of electron beam welded AA2219 alloy
850
Fracture toughness (K1C ) and tensile properties of as-cast and
851
Fracture toughness (KIc) of a dental porcelain determined by fractographic analysis
852
Fracture toughness analysis in transition temperature region of API X70 pipeline steels
853
Fracture toughness analysis of a ductile steel by means of 3D surface displacements
854
Fracture toughness analysis of inclined crack in cylindrical shell repaired with bonded composite patch
855
Fracture toughness analysis of laser-beam-welded superalloys Inconel 718 and 625
856
Fracture toughness and adhesion of thermally grown titanium oxide on medical grade pure titanium
857
Fracture toughness and Charpy impact properties of several RAFMS before and after irradiation in HFIR
858
Fracture toughness and compressive properties of cancellous bone at the head of the femur and relationships to non-invasive skeletal assessment measurements
859
Fracture toughness and corrosion behaviour of infiltrated Al2O3|P – Steel composites
860
Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
861
Fracture toughness and creep performance of PMMA composites containing micro and nanosized carbon filaments
862
Fracture toughness and cyclic fatigue resistance of resin composites with different filler size distributions
863
Fracture toughness and fatigue crack growth characteristics of nanotwinned copper Original Research Article
864
Fracture toughness and fatigue crack propagation in cast irons with spheroidal vanadium carbides dispersed within martensitic matrix microstructure
865
Fracture toughness and fatigue life of MWCNT/epoxy composites
866
Fracture toughness and flexural strength of dental ceramics for titanium
867
Fracture toughness and fracture mechanisms in Mo5SiB2 at ambient to elevated temperatures
868
Fracture toughness and fracture mechanisms of Al-Al2O3 composites at cryogenic and elevated temperatures
869
Fracture toughness and fracture mechanisms of Al-Al2O3 composites at cryogenic and elevated temperatures
870
Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials
871
Fracture toughness and hardness of ceria- and yttria-doped tetragonal zirconia ceramics
872
Fracture Toughness and Impact Strength of Hollow Epoxy Particles-Toughened Polyester Composite
873
Fracture toughness and load relaxation of dentin bonding resin systems
874
Fracture toughness and low cycle fatigue behaviour in boron modified Timetal 834 titanium alloy
875
Fracture toughness and microhardness of a composite: do they correlate?
876
Fracture toughness and residual stress measurements in tempered glass by Hertzian indentation Original Research Article
877
Fracture toughness and strength of Al2O3–Y3Al5O12 and Al2O3–Y3Al5O12–ZrO2 directionally solidified eutectic oxides up to 1900 K
878
Fracture toughness and surface energies of covalent minerals: theoretical estimates
879
Fracture toughness and surface energies of minerals: theoretical estimates for oxides, sulphides, silicates and halides
880
Fracture toughness and temperature dependence of Youngʹs modulus of a sintered albite glass
881
Fracture toughness and tensile properties of nano-structured ferritic steel 12YWT
882
Fracture toughness and thermal resistance of polycrystalline diamond compacts
883
Fracture toughness and thermal resistance of polycrystalline diamond compacts
884
Fracture toughness and water uptake of high-performance epoxy/nanoclay nanocomposites
885
Fracture toughness and wear behavior of NiAl-based nanocomposite HVOF coatings
886
Fracture toughness and wear resistance of aluminum-boron particulate composites cast using metallic and non-metallic chills
887
Fracture toughness and work of fracture of hydrated, dehydrated, and ashed bovine bone
888
Fracture toughness and yield strength of boron-doped, high (Ti+Mn) L12 titanium trialuminides
889
Fracture toughness anisotropy by indentation and SEVNB on tetragonal PZT polycrystals
890
Fracture toughness anisotropy by indentation and SEVNB on tetragonal PZT polycrystals
891
Fracture toughness anisotropy of partially stabilized ZrO2 crystals in the plane (001)
892
Fracture toughness anisotropy of PZT
893
Fracture toughness anisotropy of PZT
894
Fracture toughness assessment of ferritic–martensitic steel in liquid lead–bismuth eutectic
895
Fracture toughness assessment of in-service aged primary circuit elbows using mini-CT specimens taken from outer skin Original Research Article
896
Fracture toughness behavior in the ductile–brittle transition region of the tempered martensitic Eurofer97 steel: Experiments and modeling
897
Fracture toughness behaviour of carbon fibre epoxy composite with Kevlar reinforced interleave
898
Fracture toughness characterization of austempered ductile iron produced using both conventional and two-step austempering processes
899
Fracture toughness characterization of JLF-1 steel after irradiation in HFIR to 5 dpa
900
Fracture toughness comparison of six resin composites
901
Fracture toughness comparison of three test methods with four dental porcelains
902
Fracture toughness determination of composite resin and dentin/composite resin adhesive interfaces by laboratory testing and finite element models
903
Fracture toughness determination of Ti3Si(Al)C2 and Al2O3 using a single gradient notched beam (SGNB) method
904
Fracture toughness determination of two dental porcelains with the indentation strength in bending method
905
Fracture toughness diagrams of a notched body
906
Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes
907
Fracture Toughness Evaluation Based on Tension-softening Model and its Application to Hydraulic Fracturing
908
Fracture toughness evaluation for multidirectional CFRP by the Raman coating method
909
Fracture toughness evaluation of a H.S.L.A. steel
910
Fracture Toughness Evaluation of Hybrid and Nano-hybrid Resin Composites after Ageing under Acidic Environment
911
Fracture toughness evaluation of precursor-derived Si–C–N ceramics using the crack opening displacement approach
912
Fracture toughness evaluation of unidirectional fibre metal laminates using traditional CTOD (δ) and Schwalbe (δ5) methodologies
913
Fracture toughness evaluation using miniature specimen test and neural network
914
Fracture toughness evaluation using Palmqvist crack models on AISI 1045 borided steels
915
Fracture toughness for mixed mode I/II of epoxy resin
916
Fracture toughness for mixed mode I/II of epoxy resin Original Research Article
917
Fracture toughness improvement of austempered high silicon steel by titanium, vanadium and rare earth elements modification
918
Fracture toughness improvement of CFRP laminates by dispersion of cup-stacked carbon nanotubes
919
Fracture toughness improvement of epoxy resins with short carbon fibers
920
Fracture toughness improvement of polyurethane adhesive joints with chopped glass fibers at cryogenic temperatures
921
Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings
922
Fracture Toughness in an Extruded ZK60 Magnesium Alloy
923
Fracture toughness investigations of tungsten alloys and SPD tungsten alloys
924
Fracture toughness master-curve analysis of the tempered martensitic steel Eurofer97
925
Fracture toughness measurement of thin-film silicon
926
Fracture toughness measurement on TiN hard coatings using internal energy induced cracking
927
Fracture Toughness Measurements and Acoustic Emission Activity in Brittle Rocks
928
Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modified four-point bending method
929
Fracture toughness measurements on igneous rocks using a high-pressure, high-temperature rock fracture mechanics cell
930
Fracture toughness of 2090 Al–Li–Cu extrusions with high and low hydrogen contents
931
Fracture toughness of 2090 Al–Li–Cu extrusions with high and low hydrogen contents
932
Fracture toughness of a ceramic–resin interface
933
Fracture toughness of a composite reinforced with bone-shaped short fibers
934
Fracture toughness of a composite reinforced with bone-shaped short fibers
935
Fracture toughness of a directionally solidified Al–Nb–Ni ternary eutectic
936
Fracture toughness of a high carbon and high silicon steel
937
Fracture toughness of a high carbon and high silicon steel
938
Fracture toughness of a welded duplex stainless steel
939
Fracture toughness of a welded super duplex stainless steel
940
Fracture toughness of acid corroded Y-α-SiAlON ceramics
941
Fracture toughness of Al replicated foam Original Research Article
942
Fracture toughness of Al2O3 fibers with an artificial notch introduced by a focused-ion-beam
943
Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects
944
Fracture toughness of alumina–zirconia composites
945
Fracture toughness of borides formed on boronized ductile iron
946
Fracture toughness of bovine bone: influence of orientation and storage media
947
Fracture toughness of bovine claw horn from cattle with and without vertical fissures
948
Fracture toughness of carbides in tool steels evaluated by nanoindentation Original Research Article
949
Fracture toughness of ceramics and ceramic composites
950
Fracture toughness of China low activation martensitic (CLAM) steel at room temperature
951
Fracture toughness of closed-cell PVC foam: Effects of loading configuration and cell size
952
Fracture toughness of concentric Si3N4-based laminated structures
953
Fracture toughness of conventional, resin-modified glass–ionomer and composite luting cements
954
Fracture toughness of cross-linked and non-cross-linked temporary crown and fixed partial denture materials
955
Fracture toughness of Cu–EMC interfaces in pressurized steam
956
Fracture toughness of dental ceramics: comparison of bending and indentation method
957
Fracture toughness of difunctional epoxy resin/thermally latent initiator system modified with polyesters
958
Fracture toughness of electron beam welded Ti6Al4V
959
Fracture toughness of epoxy polymer modified with nanosilica particles: Particle size effect
960
Fracture toughness of epoxy/multi-walled carbon nanotube nano-composites under bending and shear loading conditions
961
Fracture toughness of exponential layer-by-layer polyurethane/poly(acrylic acid) nanocomposite films
962
Fracture toughness of foams with tetrakaidecahedral unit cells using finite element based micromechanics
963
Fracture toughness of Friction Hydro-Pillar Processing welding in C–Mn steel
964
Fracture toughness of geopolymeric concretes reinforced with basalt fibers
965
Fracture toughness of glass microsphere-filled polypropylene and polypropylene/poly (ethylene terephthalate-co-isophthalate) blend-matrix composites
966
Fracture toughness of grade D ship steel
967
Fracture toughness of heat cured denture base acrylic resin modified with Chlorhexidine and Fluconazole as bioactive compounds
968
Fracture toughness of heat cured denture base acrylic resin modified with Chlorhexidine and Fluconazole as bioactive compounds
969
Fracture toughness of high density polyethylene/SEBS-g-MA/montmorillonite nanocomposites
970
Fracture toughness of high strength steel—using the notch stress intensity factor and volumetric approach
971
Fracture toughness of hot-pressed Lu2Si2O7–Si3N4 and Lu4Si2O7N2–Si3N4 ceramics and correlation to microstructure and grain-boundary phases
972
Fracture toughness of human bone under tension
973
Fracture toughness of human femoral neck: effect of microstructure, composition, and age
974
Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature
975
Fracture Toughness of HVOF Thermally Sprayed WC-12Co Coating in Optimized Particle Temperature
976
Fracture toughness of in situ TiCp–AlNp/Al composite
977
Fracture toughness of intermetallic compacts consolidated from nanocrystalline powders
978
Fracture toughness of intermetallic compacts consolidated from nanocrystalline powders
979
Fracture toughness of irradiated and recovered vessel steels Original Research Article
980
Fracture toughness of irradiated modified 9Cr–1Mo steel
981
Fracture toughness of ISO 3183 X80M (API 5L X80) steel friction stir welds
982
Fracture Toughness of Kenaf Mat Reinforced Polyester Composite
983
Fracture toughness of layered structures: Embrittlement due to confinement of plasticity
984
Fracture toughness of manatee rib and bovine femur using a chevron-notched beam test
985
Fracture toughness of medium-high carbon steel for railroad wheel
986
Fracture toughness of medium-high carbon steel for railroad wheel
987
Fracture Toughness of Microfiber Reinforced Cement Composites
988
Fracture toughness of micro-fiber reinforced cement composites
989
Fracture toughness of multiferroic composite materials
990
Fracture toughness of nano- and micro-spherical silica-particle-filled epoxy composites Original Research Article
991
Fracture toughness of nanocrystalline tetragonal zirconia with low yttria content Original Research Article
992
Fracture Toughness of Nanohybrid and Hybrid Composites Stored Wet and Dry up to 60 Days
993
Fracture toughness of nanostructured railway wheels
994
Fracture toughness of natural fibers/castor oil polyurethane composites
995
Fracture toughness of nitramine and composite solid propellants
996
Fracture toughness of nylon 6/organoclay/elastomer nanocomposites
997
Fracture toughness of open-cell Kelvin foam
998
Fracture toughness of PAN-based carbon fibers estimated from strength–mirror size relation Original Research Article
999
Fracture toughness of pea: Weibull analysis Original Research Article
1000
Fracture toughness of polycrystalline tungsten under mode I and mixed mode I/II loading
