ليست عنوان مقالات لاتين Improved fairness algorithms for rings with spatial reuse Improved oxidation resistance of thermoelectric skutterudites coated with composite glass

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Improved fairness algorithms for rings with spatial reuse

2

Improved fallows: effects of species interaction on growth and productivity in monoculture and mixed stands

3

Improved Fast Integer Sorting in Linear Space

4

Improved fast neutron spectroscopy via detector segmentation

5

Improved fast neutron spectroscopy via detector segmentation

6

Improved fast photoresponse from Al doped ZnO nanowires network decorated with Au nanoparticles

7

Improved Fastness Properties of some Novel Triarylmethane Dyes on ‎Acrylic Fibres

8

Improved fatigue endurance in Mn-doped Bi3.25La0.75Ti3O12 thin films

9

Improved fatigue life of acrylic bone cements reinforced with zirconia fibers

10

Improved fatigue properties of ultrafine-grained copper under cyclic torsion loading Original Research Article

11

Improved fatty acid detection in micro-algae and aquatic meiofauna species using a direct thermal desorption interface combined with comprehensive gas chromatography–time-of-flight mass spectrometry

12

Improved fault quantification for a plate structure

13

Improved fault recovery for core based trees

14

Improved FE model to simulate interfacial bond-slip behavior in composite beams under cyclic loadings

15

Improved feasible solution algorithms for high breakdown estimation

16

Improved feature extraction and matching in urban environments based on 3D viewpoint normalization

17

Improved feature reduction in input and feature spaces

18

Improved feature selection and classification by the 2-additive fuzzy measure

19

Improved feature selection based on genetic algorithms for real time disruption prediction on JET

20

Improved FEM simulation model for tire–soil interaction

21

Improved ferrocement jacketing for restrengthening of square RC short column

22

Improved ferroelectric polarization of KSrBi2Ta3O12 thin films

23

Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence

24

Improved field emission from amorphous carbon nanotubes by surface functionalization with stearic acid Original Research Article

25

Improved field emission from multiwall carbon nanotubes with nano-size defects produced by ultra-low energy ion bombardment Original Research Article

26

Improved field emission properties of carbon nanotubes decorated with Ta layer

27

Improved field emission properties of double-walled carbon nanotubes decorated with Ru nanoparticles Original Research Article

28

Improved field emission property of graphene by laser irradiation

29

Improved field emission stability and uniformity of printed carbon nanotubes prepared using high energy-milled glass frit

30

Improved field oriented control of an LIM having joints in its secondary conductors

31

Improved field-weakening control for IFO induction motor

32

Improved filling rate and enhanced magnetic properties of Fe-filled carbon nanotubes by annealing and magnetic separation

33

Improved film cooling from cylindrical angled holes with triangular tabs: effect of tab orientations

34

Improved film deposition of carbon and carbon nitride materials on patterned substrates by ionized magnetron sputtering

35

Improved filtering parameter determination for the Goldstein radar interferogram filter

36

Improved fingerprint identification with supervised filtering enhancement

37

Improved finite difference calculation of magnetic field effects; inclusion of analytic asymptotics Original Research Article

38

Improved finite element computations of torque in brushless permanent magnet motors

39

Improved finite element method for stochastic problems

40

Improved finite element modelling of a cable-stayed bridge through systematic manual tuning

41

Improved Finite Impulse Response Filters for Enhanced Destriping of Geostationary Satellite Data

42

Improved finite-lattice estimates of the properties of two quantum spin models on the infinite square lattice

43

Improved Finnis–Sinclair potential for bcc vanadium solid

44

Improved fire resistant performance of load bearing cold-formed steel interior and exterior wall systems

45

Improved Fischer–Tropsch synthesis for gasoline over Ru, Ni promoted Co/HZSM-5 catalysts

46

Improved fish species identification by use of lab-on-a-chip technology

47

Improved fitting of PIXE spectra: the Voigt profile and Si(Li) detector modeling

48

Improved fitting of PIXE spectra: the Voigt profile and Si(Li) detector modeling

49

Improved fixed center approximation of the Faddeev equations for the image system with image

50

Improved fixed parameter tractable algorithms for two “edge” problems: MAXCUT and MAXDAG

51

Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives

52

Improved flame retardant properties of epoxy resin by fluorinated MMT/MWCNT additives

53

Improved Flexibility and Scalability by Interpreting Story Diagrams

54

Improved flexibility of thermally stable poly-lactic acid (PLA)

55

Improved flexural fatigue resistance of PVA fiber-reinforced concrete subjected to freezing and thawing cycles

56

Improved flexural–torsional stability analysis of thin-walled composite beam and exact stiffness matrix

57

Improved flexural–torsional stability analysis of thin-walled composite beam and exact stiffness matrix

58

Improved Florence model and optimization of two-component armor against single impact or two impacts

59

Improved flow- and pressure model for cone crushers

60

Improved flow pattern map for accurate prediction of the heat transfer coefficients during condensation of R-134a in smooth horizontal tubes and within the low-mass flux range

61

Improved flow through bridge waterways by entrance rounding

62

Improved flow through bridge waterways by entrance rounding

63

Improved flowability and compactibility of spherically agglomerated crystals of ascorbic acid for direct tableting designed by spherical crystallization process

64

Improved fluorescence peak integration in the Tekran 2537 for applications with sub-optimal sample loadings

65

Improved fluorescence signal with tapered polymer optical fibers under side-illumination

66

Improved Fluorescent PCR-Based Assay for Sizing CGG Repeats at the FRAXA Locus

67

Improved flux estimation and stator-resistance adaptation scheme for sensorless control of induction motor

68

Improved flux pattern by third harmonic injection for multiphase induction machines using neural network

69

Improved flux pinning through Ce additions in melt textured YBa2Cu3O7−δ

70

Improved flux pinning through Ce additions in melt textured YBa2Cu3O7−δ

71

Improved focusing capability for inelastic X-ray spectrometer at 3-ID of the APS: A combination of toroidal and Kirkpatrick-Baez (KB) mirrors

72

Improved focusing capability for inelastic X-ray spectrometer at 3-ID of the APS: A combination of toroidal and Kirkpatrick-Baez (KB) mirrors

73

Improved Forecasting of Short Term Electricity Demand by using of Integrated Data Preparation and Input Selection Methods

74

Improved forest biomass estimates using ALOS AVNIR-2 texture indices

75

Improved forest change detection with terrain illumination corrected Landsat images

76

IMPROVED FORMULA FOR PROMPT FISSION NEUTRON SPECTRUM

77

Improved formulation for spatial stability and free vibration of thin-walled tapered beams and space frames

78

Improved formulation of electron kinetic theory approach for laser ultra-short-pulse heating

79

Improved formulation of liposome-encapsulated hemoglobin with an anionic non-phospholipid

80

Improved Formulation of One-Step Approach Suitable for Initially Non-Flat Configurations and Forward Simulation Original Research Article

81

Improved formulation of W\O\W multiple emulsion for insulin encapsulation. Influence of Tthe chemical structure of insulin

82

Improved formulation, branch-and-cut and tabu search heuristic for single loop material flow system design

83

Improved Formulations of Shape Factors for the Freezing and Thawing Time Prediction of Foods

84

Improved FPT algorithm for feedback vertex set problem in bipartite tournament

85

Improved fracture toughness of boride coating developed with a diffusion annealing process

86

Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes Original Research Article

87

Improved fracture toughness of immiscible polypropylene/ethylene-co-vinyl acetate blends with multiwalled carbon nanotubes

88

Improved framework for particle swarm optimization: Swarm intelligence with diversity-guided random walking

89

Improved framework for the maintenance of the JET intershot analysis chain

90

Improved free chlorine amperometric sensor chip for drinking water applications Original Research Article

91

Improved free-interface substructures representation method

92

Improved free-standing GaN Schottky diode characteristics using chemical mechanical polishing

93

Improved Frequency Regulation in Microgrids using Metaheuristic Algorithms

94

Improved frequency selective filters

95

Improved fructan accumulation in perennial ryegrass transformed with the onion fructosyltransferase genes 1-SST and 6G-FFT

96

Improved fuel utilization in microfluidic fuel cells: A computational study

97

Improved full-vectorial beam propagation method with high accuracy for arbitrary optical waveguides

98

Improved Function and Maturation of Dendritic Cells Stimulated by Recombinant pp65 Protein: In vitro Design

99

Improved Functional Causal Likelihood-Based Causal Discovery Method for Diabetes Risk Factors

100

Improved functional mapping of the human amygdala using a standard functional magnetic resonance imaging sequence with simple modifications

101

Improved functional perturbation method for reliability analysis of randomly heterogeneous beams

102

Improved functional properties of trypsin modified by monosubstituted amino-β-cyclodextrins

103

Improved Functional Recovery of Ischemic Rat Hearts due to Singlet Oxygen Scavengers Histidine and Carnosine

104

Improved functional reserve of hypertrophied contra lateral liver after portal vein ligation in rats

105

Improved Functional Status and Quality of Life in Prohibitive Surgical Risk Patients With Degenerative Mitral Regurgitation After Transcatheter Mitral Valve Repair

106

Improved functional viual acuity after punctal occluion in dry eye patient

107

Improved functionality and control in the isomerization of a calix[4]arene-capped azobenzene

108

Improved functionalization and recovery of carboxylated carbon nanotubes using the acoustic cavitation approach

109

Improved functionalization of electrospun PLLA/gelatin scaffold by alternate soaking method for bone tissue engineering

110

Improved fuzzy clustering algorithm using adaptive particle swarm optimization for nonlinear system modeling and identification

111

Improved fuzzy control design for nonlinear Markovian-jump systems with incomplete transition descriptions

112

Improved fuzzy neural networks for solving relational equations

113

Improved fuzzy partitions for fuzzy regression models Original Research Article

114

Improved fuzzy sliding-mode control for a linear servo motor system

115

IMPROVED GA AND PSO CULLED HYBRID ALGORITHM FOR ANTENNA ARRAY PATTERN SYNTHESIS

116

Improved Gabor Filtering Application in the Identification of Handwriting

117

Improved Gagliardo–Nirenberg–Sobolev inequalities on manifolds with positive curvature

118

Improved Gamma-Heating Calculational Methods for Fast Reactors and Their Validation for Plutonium-Burning Configurations

119

Improved gas chromatographic–mass spectrometric determination of the N-methylcarbamoyl adduct at the N-terminal valine of globin, a metabolic product of the solvent N,N-dimethylformamide

120

Improved gas chromatography-flame ionization detector analytical method for the analysis of epoxy fatty acids

121

Improved gas chromatography–tandem mass spectrometry determination of pesticide residues making use of atmospheric pressure chemical ionization

122

Improved gas resource calculation using modified material balance for overpressure gas reservoirs

123

Improved gas sensing and dielectric properties of Fe doped hydroxyapatite thick films: Effect of molar concentrations

124

Improved gas sensing of electrospun carbon fibers based on pore structure, conductivity and surface modification Original Research Article

125

Improved gas sensing performances in SPR sensors by transducers activation

126

Improved gauge actions on anisotropic lattices I. Study of fundamental parameters in the weak coupling limit Original Research Article

127

Improved Gauss-Seidel projection method for micromagnetics simulations

128

Improved GC method for the determination of the active principles of Catha edulis

129

Improved GC/MS methods for measuring hourly PAH and nitro-PAH concentrations in urban particulate matter

130

Improved gelatinase a selectivity by novel zinc binding groups containing galardin derivatives

131

Improved gelling properties of whey protein isolate by addition of xanthan gum

132

Improved gene expression pattern using Epstein–Barr virus (EBV)-based plasmid and cationic emulsion

133

Improved gene transfer efficiency of a DNA-lipid-apatite composite layer by controlling the layer molecular composition

134

Improved general scaling factors and systematic tests of the SAC method for estimating correlation energies of molecules

135

Improved generalization of MCE parameter estimation with application to speech recognition

136

Improved generalized Atkin algorithm for computing square roots in finite fields

137

Improved generalized quasilinearization (GQL) method Original Research Article

138

IMPROVED GENERATION QUALITY OF A WIND DRIVEN INDUCTION GENERATOR CONNECTED TO GRID USING ARTIFICIAL NEURAL NETWORK

139

Improved generator coordinate Hartree–Fock method: application to first-row atoms

140

Improved Generic Object Retrieval In Large Scale Databases By SURF Descriptor

141

Improved genetic algorithm for design optimization of truss structures with sizing, shape and topology variables

142

Improved genetic algorithm for multidisciplinary optimization of composite laminates

143

Improved Genetic Algorithm for Power Economic Dispatch of Units With Valve-Point Effects and Multiple Fuels

144

Improved genetic algorithm for solving multiobjective solid transportation problem with fuzzy numbers

145

Improved genetic algorithm for the permutation flowshop scheduling problem

146

Improved genetic algorithm for VLSI floorplan design with non-slicing structure

147

Improved Genetic Algorithms for Deterministic Optimization and Optimization under Uncertainty. Part I. Algorithms Development

148

Improved Genetic Algorithms for Deterministic Optimization and Optimization under Uncertainty. Part II. Solvent Selection under Uncertainty

149

Improved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive

150

Improved Germline Transmission in Chicken Chimeras Produced by Transplantation of Gonadal Primordial Germ Cells into Recipient Embryos

151

Improved GFP gene transfection mediated by polyamidoamine dendrimer-functionalized multi-walled carbon nanotubes with high biocompatibility

152

Improved g-level calculations for coil planet centrifuges

153

Improved global convergence probability using multiple independent optimizations

154

Improved global exponential stability criteria of cellular neural networks with time-varying delays

155

Improved global robust exponential stability criteria for interval neural networks with time-varying delays

156

Improved global robust stability criterion for delayed neural networks

157

Improved global simulations of gross primary product based on a new definition of water stress factor and a separate treatment of C3 and C4 plants

158

Improved global simulations of gross primary product based on a new definition of water stress factor and a separate treatment of C3 and C4 plants

159

Improved global α-optical model potential at low energies Original Research Article

160

Improved global α-optical model potentials at low energies Original Research Article

161

Improved global–local simulated annealing formulation for solving non-smooth engineering optimization problems

162

Improved glucosamine and N-acetylglucosamine production by an engineered Escherichia coli via step-wise regulation of dissolved oxygen level

163

Improved glucose and IL-6 by aerobic training despite no change in insulin and insulin resistance in obese women

164

Improved glucose electrochemical biosensor by appropriate immobilization of nano-ZnO

165

Improved glucuronide hydrolysis in the determination of urinary 1-hydroxypyrene

166

Improved Glycaemic Control with Insulin Glargine as Part of a Basal-bolus Regimen in T2DM Patients Inadequately Controlled on Premixed Therapy

167

Improved glycemic control induces regression of left ventricular mass in patients with type 1 diabetes mellitus

168

IMPROVED GOATS MILK AND MEAT PRODUCTION FEEDING GUAR HAY IN MARGINAL RAINFED AREAS OF POTHWAR REGION OF PAKISTAN

169

Improved gold and silver extraction from a refractory antimony ore by pretreatment with alkaline sulphide leach

170

Improved Gō-like Models Demonstrate the Robustness of Protein Folding Mechanisms Towards Non-native Interactions

171

Improved GPS travelling wave fault locator for power cables by using wavelet analysis

172

Improved Graft Mesenchymal Stem Cell Survival in Ischemic Heart With a Hypoxia-Regulated Heme Oxygenase-1 Vector Original Research Article

173

Improved graphene growth in UHV: Pit-free surfaces by selective Si etching of SiC(0001)–Si with atomic hydrogen

174

Improved graphitization and electrical conductivity of suspended carbon nanofibers derived from carbon nanotube/polyacrylonitrile composites by directed electrospinning Original Research Article

175

Improved gravitational grain size separation method

176

Improved gravitational search algorithm for parameter identification of water turbine regulation system

177

Improved green properties of gelcast alumina through multiple synergistic interaction of polysaccharides

178

Improved Green’s function measurement for hybridization expansion quantum Monte Carlo Original Research Article

179

Improved Grey predictor rolling models for wind power prediction

180

Improved GRG method for the optimal synthesis of linkages in function generation problems

181

Improved grounded-capacitor SRCO using only a single PFTFN

182

Improved groundwater vulnerability mapping for the karstic chalk aquifer of south east England

183

Improved Group Search Optimization Algorithm for Multi- Objective Optimal Reactive Power Dispatch

184

Improved group search optimization method for solving CHPED in large scale power systems

185

Improved growth and essential oil yield and quality in Foeniculum vulgare mill on mycorrhizal inoculation supplemented with P-fertilizer

186

Improved growth and nutrition status in children with methylmalonic or propionic acidemia fed an elemental medical food

187

Improved growth of GaN layers on ultra thin silicon nitride/Si (1 1 1) by RF-MBE

188

Improved growth of Ge quantum dots in Ge/Si stacked layers by pre-intermixing treatments

189

Improved growth of lipoprotein lipase deficient kittens by feeding a low-fat, highly digestible diet

190

Improved growth of salinity-stressed soybean after inoculation with salt pre-treated mycorrhizal fungi

191

Improved growth with bioabsorbable sutures in both high- and low-pressure zones

192

Improved growth, productivity and quality of tomato (Solanum lycopersicum L.) plants through application of shikimic acid

193

Improved GUT and SUSY breaking by the same field Original Research Article

194

Improved gyratory crushing operation by the assessment of liner wear and mantle profile redesign

195

Improved H2 production rate by hydrolysis of Ammonia Borane using quaternary alloy catalysts

196

Improved H2 sensing properties of Co-doped SnO2 nanofibers

197

Improved H2-sensing performance of nanocluster-based highly porous tungsten oxide films operating at moderate temperature

198

Improved Haar and Walsh functions over triangular domains

199

Improved haemocompatibility of cysteine-modified polymers via endogenous nitric oxide

200

Improved haemorrheological properties by Ginkgo biloba extract (Egb 761) in type 2 diabetes mellitus complicated with retinopathy

201

Improved Halbach sensor for NMR scanning of drill cores

202

Improved Hamiltonian for Minkowski Yang-Mills theory Original Research Article

203

Improved Hand Hygiene Compliance through “I Save Lives with Clean Hands” Campaign

204

Improved hardness and corrosion resistance of iron by Ti/TiN multilayer coating and plasma nitriding duplex treatment

205

Improved hardness and hierarchic influences on wear in submicron sintered alumina

206

Improved hardness and hierarchic influences on wear in submicron sintered alumina

207

Improved hardness and oxidation resistance for CrAlN hard coatings with Y addition by magnetron co-sputtering

208

Improved hard-thermal-loop effective action for hot QED and QCD Original Research Article

209

Improved Hardy inequalities in the Grushin plane

210

Improved harmony search algorithms for sizing optimization of truss structures

211

Improved HBT linearity with a "post-distortion"-type collector linearizer

212

Improved Healing of Colonic Anastomosis with Allotransplantation of Axillary Skin Fibroblasts in Rats

213

Improved health and growth of fish fed mannan oligosaccharides: Potential mode of action

214

Improved Health-Related Quality of Life and Functional Status After Surgical Ventricular Restoration

215

Improved health-relevant functionality in dark germinated Mucuna pruriens sprouts by elicitation with peptide and phytochemical elicitors

216

Improved heat stability by whey protein–surfactant interaction

217

Improved heat storage rate for an automobile coolant waste heat recovery system using phase-change material in a fin–tube heat exchanger

218

Improved heating-element configurations for a tunnel oven

219

Improved heavy quark potential at finite temperature from anti-de Sitter supergravity

220

Improved hemocompatibility of poly(ethylene terephthalate) modified with various thiol-containing groups

221

Improved Hemodynamics and Outcome After Modified Norwood Operation on the Beating Heart

222

Improved Hessian approximation with modified secant equations for symmetric rank-one method

223

Improved heterogenized catalysts for selective propylene oligomerization to 2,3-dimethylbutenes prepared by oxidative addition of polymer-anchored β-dithioacetylacetonate ligands to nickel(0) complexes Original Research Article

224

Improved heteronuclear decoupling in REDOR with the use of TPPM

225

Improved heteronuclear decoupling schemes for solid-state magic angle spinning NMR by direct spectral optimization

226

Improved heuristic methods for multiple stage production planning

227

Improved heuristics for sequencing cutting patterns

228

Improved heuristics for the early/tardy scheduling problem with no idle time

229

Improved heuristics for the n-job single-machine weighted tardiness problem

230

Improved heuristics for the traveling purchaser problem

231

Improved HF propagation and system performance predictions under ionospherically extreme conditions Original Research Article

232

Improved Hidden Markov Model training for multiple sequence alignment by a particle swarm optimization—evolutionary algorithm hybrid

233

Improved hidden Markov models in the wavelet-domain

234

Improved Higgs mass stability bound in the standard model and implications for supersymmetry

235

Improved high cycle fatigue properties of a new magnesium alloy

236

Improved high performance liquid chromatographic method for determination of carotenoids in the microalga Chlorella pyrenoidosa

237

Improved high performance liquid chromatographic separation of anthocyanin compounds from grapes using a novel mixed-mode ion-exchange reversed-phase column

238

Improved high power Li-ion batteries with Li2RuO3 addition: A fast charging and fast cycling study

239

Improved high Q value of 0.5LaAlO3-0.5SrTiO3 microwave dielectric ceramics at low sintering temperature

240

Improved high Q value of CaTiO3–Ca(Mg1/3Nb2/3)O3 solid solution with near zero temperature coefficient of resonant frequency

241

Improved high q value of MgTiO3-CaTiO3 microwave dielectric ceramics at low sintering temperature

242

Improved high recovery brackish water desalination process based on fluidized bed air stripping Original Research Article

243

Improved high resistivity ZnS films on HgCdTe for passivation of infrared devices

244

Improved high temperature properties of SiC-ceramics sintered with Lu2O3-containing additives

245

Improved high temperature stability of NH3-SCR catalysts based on rare earth vanadates supported on TiO2single bondWO3single bondSiO2

246

Improved high temperature stability of organic solar cells using a phosphine oxide type cathode modification layer

247

Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7

248

Improved highly sensitive method for determination of nicotine and cotinine in human plasma by high-performance liquid chromatography

249

Improved High-Order Analysis of Linear Vibrations of a Thick Sandwich Panel with an Electro-Rheological Core by Using Exponential Shear Deformation Theory

250

Improved high-performance liquid chromatographic analysis of terazosin in human plasma

251

Improved high-performance liquid chromatographic detection of paclitaxel in patientʹs plasma using solid-phase extraction, and semi-micro-bore C18 separation and UV detection

252

Improved high-performance liquid chromatographic method for the combined analysis of phospholipase, lipoxygenase and cyclooxygenase activities

253

Improved high-performance liquid chromatographic method for the pharmacokinetic studies of a novel iron chelator, CP502, in rats

254

Improved high-performance liquid chromatographic method in the analysis of adenovirus particles

255

Improved high-performance liquid chromatographic method to estimate aminosugars and its application to glycosaminoglycan determination in plasma and serum

256

Improved high-Q microwave dielectric material using B2O3-doped MgNb2O6 ceramics

257

Improved high-Q microwave dielectric resonator using CuO-doped MgNb2O6 ceramics

258

Improved high-Q microwave dielectric resonator using ZnO and WO3-doped Zr0.8Sn0.2TiO4 ceramics

259

Improved high-T/sub c/ superconductor sampler circuits using Josephson transmission line buffers

260

Improved High-Throughput Sequencing of the Human Oral Microbiome: From Illumina to PacBio

261

Improved high-throughput sunflower and cotton genomic DNA extraction and PCR fidelity

262

Improved Hilbert moment thermal QCD sum rules for Bs meson and stability with respect to moment parameter

263

Improved Histochemical Test for In Situ Detection of Hydrogen Peroxide in Cells Undergoing Oxidative Burst or Lignification

264

Improved Hiyama cross-coupling reactions using HOMSi® reagents: a novel application of a palladacycle

265

Improved Hoeffding-style performance guarantees for accurate classifier

266

Improved Hoeffding-style performance guarantees for accurate classifiers

267

Improved Hoeffding-style performance guarantees for accurate classifiers

268

Improved hollow-core photonic crystal fiber design for delivery of nanosecond pulses in laser micromachining applications

269

Improved holographic Yang–Mills at finite temperature: Comparison with data Original Research Article

270

Improved homogeneity of microcrystalline absorber layer in thin-film silicon tandem solar cells

271

Improved homopolymer separation to enable the application of 1H NMR and HPLC for the determination of the reaction parameters of the graft copolymerization of acrylic acid onto starch Original Research Article

272

Improved homotopy perturbation method for solving Fredholm type integro-differential equations

273

Improved hormonal and oxidative changes by Royal Jelly in the rat model of PCOS: An experimental study

274

IMPROVED HORTICULTURAL PRACTICES AGAINST LEAF WILTING, ROOT ROT AND NUTRIENT UPTAKE INMANGO (Mangiferaindica L.)

275

Improved HPLC method for analysis of 1-hydroxypyrene in human urine specimens of cigarette smokers

276

Improved HPLC method for the simultaneous determination of allantoin, uric acid and creatinine in cattle urine

277

Improved HPLC method for the simultaneous determination of tramadol and O-desmethyltramadol in human plasma

278

Improved HPLC methodology for food control – furfurals and patulin as markers of quality

279

Improved HPLC methodology for monitoring thiopurine metabolites in patients on thiopurine therapy

280

Improved human oocyte development after vitrification: a comparison of thawing methods

281

Improved HVAC operation to preserve a church organ

282

Improved hybrid approach to transient stability assessment

283

Improved hybrid MMSE detection for turbo-trellis-coded modulation-assisted multi-user OFDM systems

284

Improved hybrid simulated annealing algorithm for navigation scheduling for the two dams of the Three Gorges Project

285

Improved hydrate equilibrium measurements in ternary gas and black oil systems

286

Improved hydrocarbons analysis of heavy petroleum fractions by high temperature comprehensive two-dimensional gas chromatography

287

Improved hydrodynamic equations for the accurate prediction of diffusivities in supercritical carbon dioxide

288

Improved hydrodynamic permeability and antifouling properties of poly(vinylidene fluoride) membranes using polydopamine nanoparticles as additives

289

Improved hydrogen cycling kinetics of nano-structured magnesium/transition metal multilayer thin films

290

Improved hydrogen desorption in lithium alanate by addition of SWCNT–metallic catalyst composite

291

Improved hydrogen desorption properties of ammonia borane by Ni-modified metal-organic frameworks

292

Improved hydrogen evolution activities under visible light irradiation over NaTaO3 codoped with lanthanum and chromium

293

Improved hydrogen gas production in electrohydrolysis of vinegar fermentation wastewater by scrap aluminum and salt addition

294

Improved hydrogen generation from alkaline NaBH4 solution using cobalt catalysts supported on modified activated carbon

295

Improved hydrogen generation from alkaline solution using carbon-supported as catalysts

296

Improved hydrogen generation from formic acid

297

Improved hydrogen production by coupled systems of hydrogenase negative photosynthetic bacteria and fermentative bacteria in reverse micelles

298

Improved hydrogen production by uptake hydrogenase deficient mutant strain of Rhodobacter sphaeroides O.U.001

299

Improved hydrogen production from water splitting using TiO2–ZnO mixed oxides photocatalysts

300

Improved hydrogen production of the downstream bioreactor by coupling single chamber microbial fuel cells between series-connected photosynthetic biohydrogen reactors

301

Improved hydrogen production under microaerophilic conditions by overexpression of polyphosphate kinase in Enterobacter aerogenes

302

Improved hydrogen production via thermophilic fermentation of corn stover by microwave-assisted acid pretreatment

303

Improved hydrogen sensing characteristics of a Pt/SiO2/GaN Schottky diode

304

Improved hydrogen sorption performance of NbF5-catalysed NaAlH4

305

Improved hydrogen sorption/desorption capacity of exfoliated NiCl2-graphite intercalation compound effected by thermal treatment

306

Improved hydrogen storage behaviours of nanocrystalline and amorphous Mg2Ni-type alloy by Mn substitution for Ni

307

Improved hydrogen storage capacity through hydrolysis of solid NaBH4 catalyzed with cobalt boride

308

Improved hydrogen storage in the modified metal-organic frameworks by hydrogen spillover effect

309

Improved hydrogen storage performance of defected carbon nanotubes with Pd spillover catalysts dispersed using supercritical CO2 fluid

310

Improved hydrogen storage performance of Li–Mg–N–H materials by optimizing composition and adding single-walled carbon nanotubes

311

Improved hydrogen storage performance of Mg(NH2)2/LiH mixture by addition of carbon nanostructured materials

312

Improved hydrogen storage performance of MgH2–NaAlH4 composite by addition of TiF3

313

Improved hydrogen storage performance of the LiNH2–MgH2–LiBH4 system by addition of ZrCo hydride

314

Improved hydrogen storage properties in Mg-based thin films by tailoring structures

315

Improved hydrogen storage properties of LiBH4 by mechanical milling with various carbon additives

316

Improved hydrogen storage properties of LiBH4 doped Li–N–H system

317

Improved hydrogen storage properties of Mg-based nanocomposite by addition of LaNi5 nanoparticles

318

Improved hydrogen storage reversibility of LiBH4 destabilized by Y(BH4)3 and YH3

319

Improved hydrogenolysis (C–S, C–M) function with basic supported hydrodesulfurization catalysts

320

Improved hydrogen-sensing performance of a Pd/GaN Schottky diode with a surface plasma treatment approach

321

Improved hydrogen-sensitive properties of MISiC Schottky sensor with thin NO-grown oxynitride as gate insulator

322

Improved hydrolysis properties of Mg3RE hydrides alloyed with Ni

323

Improved hydrophilic interaction chromatography method for the identification and quantification of glucosinolates

324

Improved Hydrophilicity of Membrane by Ethylenediaminetetraacetic Acid Modification

325

Improved hydrophilicity of zinc oxide-incorporated layer-by-layer polyelectrolyte film fabricated by dip coating method

326

Improved hydrophobicity of inorganic–organic hybrid mesoporous silica with cage-like pores

327

Improved Hydrosolar Roof for buildings’ air conditioning

328

Improved hydrothermal stability of niobia-supported Pd catalysts Original Research Article

329

Improved ID-based security framework for ad hoc network

330

Improved identification and autotuning of PI controllers for MIMO processes by relay techniques

331

Improved identification of coronary artery disease in patients with left bundle branch block by use of dobutamine stress echocardiography and comparison with myocardial perfusion tomography

332

Improved identification of Hammerstein plants using new CPSO and IPSO algorithms

333

Improved identification of metabolites in complex mixtures using HSQC NMR spectroscopy Original Research Article

334

Improved Identification of Patients With Coronary Artery Disease by the Use of New Lipid and Lipoprotein Biomarkers

335

Improved identification of squeeze-film damper models for aeroengine vibration analysis

336

Improved identification of sulfidic soil materials by a modified incubation method

337

Improved identification of volcanic features using Landsat 7 ETM+

338

Improved IEEE802.11 PCF performance using silence detection and cyclic shift on stations polling

339

Improved image contrast with mangafodipir trisodium (MnDPDP) during MR-guided percutaneous cryosurgery of the liver

340

Improved image decoding over noisy channels using minimum mean-squared estimation and a Markov mesh

341

Improved image quality in abdominal computed tomography reconstructed with a novel Deep Learning Image Reconstruction technique – initial clinical experience

342

Improved image quality in digital mammography with image processing

343

Improved Image Quality of Coronary CT Angiography Using Automatic Motion Correction

344

Improved imaging in delicate situations

345

Improved imaging of secondary phases in solids by energy-filtering TEM

346

Improved imaging of secondary phases in solids by energy-filtering TEM

347

Improved immobilization of biomolecules to quinone-rich polydopamine for efficient surface functionalization

348

Improved immobilized carbon dioxide capture sorbents

349

Improved Immune Function with Donor B-cell Infusion after Semi-Allogeneic Bone Marrow Transplantation in Mice

350

Improved Immune Functions with Administration of a Low-Fat Diet in a Burn Animal Model

351

Improved immuno double labelling for cell and structural biology

352

Improved Immunogenicity of Tetanus Toxoid by Brucella abortus S19 LPS Adjuvant

353

Improved immunogold labeling of epoxy sections by the use of propylene oxide as additional agent in dehydration, infiltration and embedding

354

Improved immunological detection of Spongospora subterranea

355

Improved Impact Toughness of 13Cr Martensitic Stainless Steel Hardened by Laser

356

Improved implementation and robustness study of the X-FEM for stress analysis around cracks

357

Improved implementation of the extended finite element method for stress analysis around cracks

358

Improved implicit integrators for transient impact problems - geometric admissibility within the conserving framework

359

Improved implicit integrators for transient impact problems––dynamic frictional dissipation within an admissible conserving framework Original Research Article

360

Improved in ovulo embryo culture for stenospermocarpic grapes (Vitis vinifera L.)

361

Improved in silico prediction of carcinogenic potency (TD50) and the risk specific dose (RSD) adjusted Threshold of Toxicological Concern (TTC) for genotoxic chemicals and pharmaceutical impurities

362

Improved in situ calibration technique for ITER ex-vessel neutron yield monitor

363

Improved in vitro and in vivo biocompatibility of dual plasma modified titanium alloy

364

Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment

365

Improved in vitro detection of hemolysin BL from Bacillus cereus

366

Improved in vitro propagation of Curcuma caesia, a valuable medicinal plant

367

Improved in vivo human carotid artery wall T2⁎ estimation

368

Improved in vitro rooting and acclimatization of Jatropha curcas plantlets

369

Improved Incompressible Smoothed Particle Hydrodynamics method for simulating flow around bluff bodies

370

Improved incorporation and stabilisation of β-carotene in hydrocolloids using glycerol

371

Improved indicators of cell membrane potential that use fluorescence resonance energy transfer Original Research Article

372

Improved indicators of water use performance and productivity for sustainable water conservation and saving

373

Improved indoor thermal comfort during defrost with a novel reverse-cycle defrosting method for air source heat pumps

374

Improved induced matchings in sparse graphs Original Research Article

375

Improved induction technique for electric charge measuring

376

Improved industrial water management through membrane processes — the case of a large thermo-electric power plant Original Research Article

377

IMPROVED INFEASIBLE-INTERIOR-POINT ALGORITHM FOR LINEAR COMPLEMENTARITY PROBLEMS

378

Improved inference for a linear mixed-effects model when the subpopulation effects are clustered

379

Improved inference in nonparametric regression using Lk-smoothing splines

380

Improved inference in the evaluation of mutual fund performance using panel bootstrap methods

381

Improved inference in the evaluation of mutual fund performance using panel bootstrap methods

382

Improved Inference of Mutation Rates: I. An Integral Representation for the Luria–Delbrück Distribution

383

Improved Inference of Mutation Rates: II. Generalization of the Luria–Delbrück Distribution for Realistic Cell-Cycle Time Distributions

384

Improved inference on a scalar fixed effect of interest in nonlinear mixed-effects models

385

Improved inference on a scalar fixed effect of interest in nonlinear mixedeffects models

386

Improved information on electron screening in (7)Li(p,(alpha))(alpha) using the Trojan-horse method

387

Improved infrared and visible emission spectra of the H3 and D3 molecules

388

Improved infrared spectrophotometer for point-of-care patient 13C-urea breath testing in the primary care setting

389

Improved inhomogeneous Strichartz estimates for the Schrِdinger equation

390

Improved in-hospital mortality in women undergoing coronary artery bypass grafting

391

Improved initial density dependence of the viscosity and a corresponding states function for high pressures

392

Improved initial discharge capacity of nanostructured Ni-Co spinel ferrite as anode material in lithium ion batteries

393

Improved injectability and in vitro degradation of a calcium phosphate cement containing poly(lactide-co-glycolide) microspheres

394

Improved innovation through the integration of Quality Gates into the Enterprise and Product Lifecycle Roadmaps

395

Improved input parameters for diffusion models of skin absorption

396

Improved Insert Geometry for Reducing Tank-Wall Losses in Pad-Mounted Transformers

397

Improved instantaneous frequency estimation using an adaptive short-time Fourier transform

398

Improved instrumental sensitivity for Cd determination in aqueous solutions using Wavelength Dispersive X-ray Fluorescence Spectrometry, Rh-target tube instrumentation

399

Improved instrumental sensitivity for Cd determination in aqueous solutions using Wavelength Dispersive X-ray Fluorescence Spectrometry, Rh-target tube instrumentation

400

Improved instrumental variables and generalized method of moments estimators

401

Improved Insulin Resistance with Clearance of Chronic Hepatitis C, Genotype 4

402

Improved integral formulations for fast 3-D method-of-momentssolvers

403

Improved integral inequalities in n independent variables

404

Improved integro-modal approach with pressure distribution assessment and the use of overlapped cavities

405

Improved interatomic potential for stressed Si, O mixed systems

406

IMPROVED INTERCEPTION OF COMBINED SEWAGE IN THE TRONDHEIM-H0VRINGEN WASTEWATER SYSTEM

407

IMPROVED INTERCEPTION OF COMBINED SEWAGE IN THE TRONDHEIM-H0VRINGEN WASTEWATER SYSTEM

408

Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing

409

Improved interfacial adhesion in PBO fiber/bismaleimide composite with oxygen plasma plus aging and humid resistance properties

410

Improved interfacial and electrical properties of atomic layer deposition HfO2 films on Ge with La2O3 passivation

411

Improved interfacial mechanical properties of Al2O3-13wt%TiO2 plasma-sprayed coatings derived from nanocrystalline powders Original Research Article

412

Improved interframe registration based nonuniformity correction for focal plane arrays

413

Improved interior point method for OPF problems

414

Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers Original Research Article

415

Improved intermediate asymptotics for the heat equation

416

Improved intermolecular water potential from global geometry optimization of small water clusters using local MP2 Original Research Article

417

Improved interpolation of meteorological forcings for hydrologic applications in a Swiss Alpine region

418

Improved interpretation of in-diffusion measurements with confined swelling clays

419

Improved interpretation of solar wind ion measurements via high-resolution magnetic field data Original Research Article

420

Improved Interstage Mortality With the Modified Norwood Procedure: A Meta-Analysis

421

Improved inter-tube coupling in CNT bundles through carbon ion irradiation Original Research Article

422

Improved interval estimation for the two-parameter Birnbaum–Saunders distribution

423

Improved intraocular bioavailability of ganciclovir by mucoadhesive polymer based ocular microspheres: development and simulation process in Wistar rats

424

Improved intrapartum surveillance with PR interval analysis of the fetal electrocardiogram: A randomized trial showing a reduction in fetal blood sampling

425

Improved invariant set estimation for general-scale families

426

Improved inventory models with service level and lead time

427

Improved inverse halftoning using vector and texture-lookup table-based learning approach

428

Improved iodometric method for simultaneous determination of non-stoichiometric oxygen and total copper content in YBCO superconductors

429

Improved ion guide for heavy-ion fusion–evaporation reactions

430

Improved ion guide for heavy-ion fusion–evaporation reactions

431

Improved ionic conductivity in NdGdZr2O7: Influence of Sc3+ substitution

432

Improved ionic conductivity of nitrile rubber/ionic liquid composites

433

Improved ionic conductivity of nitrile rubber/Li(CF3SO2)2N composites by adding imidazolium-type zwitterion

434

Improved iron solubility in carrot juice fermented by homo- and hetero-fermentative lactic acid bacteria Original Research Article

435

Improved irrigation water demand forecasting using a soft-computing hybrid model

436

Improved isolation and detection of pathogenic Vibrio parahaemolyticus from seafood using a new enrichment broth

437

Improved isolation of glucuronan from algae and the production of glucuronic acid oligosaccharides using a glucuronan lyase Original Research Article

438

Improved isospin dependent quantum molecular dynamics model and its application to fusion reactions near Coulomb barrier Original Research Article

439

Improved Itchy Quality of Life Following Topical Application of Sweet Almond Oil in Patients with Uremic Pruritus: A Randomized, Controlled Trial

440

Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere

441

Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere

442

Improved iterative olefination approach to oligosaccharide mimics: stereoselective synthesis of β-(1→6)-d-galactopentaose methylene isostere

443

Improved J and COD estimation by GE/EPRI method in elastic to fully plastic transition zone

444

Improved Jacobi matrix method for the numerical solution of Fredholm integro-differential-difference equations

445

Improved Jacobi-function method with symbolic computation to construct new double-periodic solutions for the generalized Ito system

446

Improved Jacobin elliptic function method and its applications

447

Improved Jsc in CIGS thin film solar cells using a transparent conducting ZnO:B window layer

448

Improved Kaplan-Meier Estimator in Survival Analysis Based on Partially Rank-Ordered Set Samples

449

Improved kernel fisher discriminant analysis for fault diagnosis

450

Improved kernel principal component analysis for fault detection

451

Improved kHz-SLR tracking techniques and orbit quality analysis for LEO missions Original Research Article

452

Improved kinetic data from analysis of complex hydrocarbon mixtures by using SIMCA Original Research Article

453

Improved kinetic model for water splitting thermochemical cycles using Nickel Ferrite

454

Improved kinetic modeling of the early generation of CO2 from the Boom Clay kerogen. Implications for simulation of CO2 production upon disposal of high activity nuclear waste

455

Improved kinetics-based gold cyanide extraction with mixture of LIX79+TOPO utilizing hollow fiber membrane contactors

456

Improved King’s methods with optimal order of convergence based on rational approximations

457

Improved K-Means Algorithm for Capacitated Clustering Problem

458

Improved K-Means Algorithm for Identification MR Brain Image Tumor

459

Improved k-nearest neighbor classification

460

Improved Knock Detection Method Based on New Time-Frequency Analysis In Spark Ignition Turbocharged Engine

461

Improved knowledge management through first-order logic in engineering design ontologies

462

Improved K-value correlation for UAE crude oil components at high pressures using PVT laboratory data☆

463

Improved K-values correlation for UAE crude oil components at low pressures using PVT laboratory data

464

Improved k–ε model and wall function formulation for the RANS simulation of ABL flows

465

Improved k–ε two-equation turbulence model for canopy flow

466

Improved l1-SPIRiT using 3D walsh transform-based sparsity basis

467

Improved L2-stabilization theory to compute resonances under multichannel conditions

468

Improved label propagation algorithms with node attribute and link strength for community detection

469

Improved labeling technique and radiochemical purity determination of 99mTc-N-acetylcysteine

470

Improved land cover and emission factors for modeling biogenic volatile organic compounds emissions from Hong Kong

471

Improved land surface emissivities over agricultural areas using ASTER NDVI

472

Improved language modelling through better language model evaluation measures

473

Improved Laplacian Smoothing of Noisy Surface Meshes

474

Improved large mesoporous ordered molecular sieves—Stabilization and acid/base functionalization

475

Improved large optical cavity design for 10.6 μm (Al)GaAs quantum cascade lasers

476

Improved large-scale production of vitamin B12 by Pseudomonas denitrificans with betaine feeding

477

Improved large-scale synthesis of phenylisoserine and the taxol C-13 side chain

478

Improved large-signal performance of paralleled DC-DC converters current sharing

479

Improved Laser Beams-Based Security Fence to Protect Borders

480

Improved Late Cretaceous and early Cenozoic Paleomagnetic apparent polar wander path for the Pacific plate

481

Improved latex agglutination test for detection of antibodies in serum and cerebrospinal fluid of Trypanosoma brucei gambiense infected patients

482

Improved LDSE processing for the avoidance of overplating yielding 19.2% efficiency on commercial grade crystalline Si solar cell

483

Improved lead alloys for lead/acid positive grids in electric-vehicle applications

484

Improved leakage current and ferromagnetic properties in magnetic field annealed BiFeO3-based ceramics

485

Improved learning of I2C distance and accelerating the neighborhood search for image classification

486

Improved Lebesgue constants on the triangle

487

Improved lectin-mediated immobilization of human red blood cells in superporous agarose beads

488

Improved left atrial transport and function with orthotopic heart transplantation by bicaval and pulmonary venous anastomoses

489

Improved left ventricular endocardial border delineation and opacification with OPTISON (FS069), new echocardiographic contrast agent : Results of phase III multicenter trial

490

Improved Left Ventricular Function After Chronic Left Ventricular Unloading

491

Improved left ventricular function after thiamine supplementation in patients with congestive heart failure receiving long-term furosemide therapy,

492

Improved legume tree fallows and tillage effects on structural stability and infiltration rates of a kaolinitic sandy soil from central Zimbabwe

493

Improved Level Balancing with Diode-Clamped Multi-Level Inverter Configuration Based on Multi-Winding Transformer

494

Improved LIBS limit of detection of Be, Mg, Si, Mn, Fe and Cu in aluminum alloy samples using a portable Echelle spectrometer with ICCD camera

495

Improved lifetime in organic solar cells using a bilayer cathode of organic interlayer/Al

496

Improved lifetime of microchannel-plate PMTs

497

Improved lifetime of microchannel-plate PMTs

498

Improved light absorption in thin-film silicon solar cells by integration of silver nanoparticles

499

Improved light extraction efficiency with angle independent electroluminescence spectrum in nano-phosphor coated white organic light emitting diodes

500

Improved light output power of InGaN/GaN MQW LEDs by lower temperature p-GaN rough surface

501

Improved light scattering and surface plasmon tuning in amorphous silicon solar cells by double-walled carbon nanotubes

502

Improved light transitions from scintillators to new photocathode windows

503

Improved light transitions from scintillators to new photocathode windows

504

Improved light trapping in thin-film silicon solar cells via alternated n-type silicon oxide reflectors

505

Improved light yield of lead tungstate scintillators

506

Improved light yield of lead tungstate scintillators

507

Improved light-load efficiency for synchronous rectifier voltage regulator module

508

Improved lignocellulose conversion to biofuels with thermophilic bacteria and thermostable enzymes

509

Improved likelihood ratio and score tests on concentration parameters of von Mises–Fisher distributions

510

Improved likelihood ratio tests for cointegration rank in the VAR model

511

Improved likelihood ratio tests for cointegration rank in the VAR model

512

Improved likelihood ratio tests on the von Mises–Fisher distribution

513

Improved likelihood-based inference for the MA(1) model

514

Improved likelihood-based inference for the stationary AR(2) model

515

Improved limit on the branching ratio of μ−→e+ conversion on titanium

516

Improved limit on the electron capture decay branch of 176Lu

517

Improved limits for natural α radioactivity of tungsten with a CaWO4 scintillating bolometer

518

Improved Lindstedt–Poincaré method for the solution of nonlinear problems

519

Improved linear interpolation method for the estimation of snow-covered area from optical data

520

Improved linear multi-step methods for stochastic ordinary differential equations

521

Improved linear systolic algorithms for substring statistics

522

Improved liposome immunomigration strip assay for alachlor determination

523

Improved liquid chromatographic method for determination of carotenoids in Taiwanese mango (Mangifera indica L.)

524

Improved liquid chromatographic method for mitoxantrone quantification in mouse plasma and tissues to study the pharmacokinetics of a liposome entrapped mitoxantrone formulation

525

Improved liquid chromatographic method for the analysis of photosynthetic pigments of higher plants

526

Improved liquid chromatographic method with pulsed electrochemical detection for the analysis of gentamicin

527

Improved liquid chromatographic method with pulsed electrochemical detection for the analysis of kanamycin

528

Improved liquid chromatography tandem mass spectrometry method for the determination of phenolic compounds in virgin olive oil

529

Improved liquid chromatography–mass spectrometry performance in quantitative analysis using a nanosplitter interface

530

Improved liquid chromatography—Online radioactivity detection for metabolite profiling

531

Improved liquid chromatography–tandem mass spectrometry method for the analysis of eptifibatide in human plasma

532

Improved liquid-chromatography tandem mass spectrometry method for the determination of the bioactive dipeptides, carnosine and anserine: Application to analysis in chicken broth

533

Improved liquid–liquid–liquid microextraction method and its application to analysis of four phenolic compounds in water samples

534

Improved lithium capacity of defective V2O5 materials

535

Improved lithium manganese oxide spinel/graphite Li-ion cells for high-power applications

536

Improved lithium-ion transport in NASICON-type lithium titanium phosphate by calcium and iron doping

537

Improved Liu estimator in a linear regression model

538

Improved LMI representations for the analysis and the design of continuous-time systems with polytopic type uncertainty

539

Improved load-frequency control with capacitive energy storage

540

Improved local control of invasive bladder cancer by concurrent cisplatin and preoperative or definitive radiation: CM Coppin, MK Gospodarowicz, K James, IF Tannock, B Zee, J Carson, J Pater, LD Sullivan for the National Cancer Institute of Canada Clinica

541

Improved local convergence analysis of inexact Gauss–Newton like methods under the majorant condition in Banach spaces

542

Improved local search algorithms for the rectangle packing problem with general spatial costs

543

Improved localization of a “hot spot” in the lungs for an array of four HPGe detectors—the simultaneous use of two gamma energies

544

Improved localization of a “hot spot” in the lungs for an array of four HPGe detectors—the simultaneous use of two gamma energies

545

Improved logarithmic-geometric mean inequality and its application

546

Improved Long Ureteral Reconstruction with Ileum By Longitudinal Clipping and Mucosal Stripping: an Animal Study

547

Improved Long Ureteral Reconstruction with Ileum By Longitudinal Clipping and Mucosal Stripping: an Animal Study

548

Improved Long-range Order of Silicious MCM-41 by Gradual Heating of Synthesis Gel

549

Improved long-term survival associated with stent deployment during percutaneous coronary interventions: Results from a registry of 3399 patients

550

Improved long-term survival seen after lung volume reduction surgery compared to continued medical therapy for emphysema

551

Improved loquat (Eriobotrya japonica Lindl.) cultivars: Variation of phenolics and antioxidative potential

552

Improved Los Alamos model applied to the neutron induced fission of 235U and 237Np

553

Improved Los Alamos model applied to the neutron induced fission of 239Pu and 240Pu and to the spontaneous fission of Pu isotopes

554

Improved loss calculations at an ATM multiplexer

555

Improved low energy electron projection in-line holograms reconstruction: application to the holograms of a tungsten tip

556

Improved low temperature removal of NOX from lean-burn exhaust via adsorption on TiO2-modified Ag–alumina Original Research Article

557

Improved Low Voltage - Ride Through (LVRT) ‎Performance of an Active Distribution Grid by ‎Providing a Bidirectional Converter to Control DC ‎Bus Voltage Ripple

558

Improved Low Voltage Ride-Through Capability of DFIG with ESO Controller under Unbalanced Network Conditions

559

Improved Low Voltage Ride-through Capability of PV Connected to the Unbalanced Main Grid

560

Improved lower bound for the vertex connectivity of image-cages Original Research Article

561

Improved lower bound on the number of balanced symmetric functions over GF(p)

562

Improved lower bound on the Shannon capacity of C7

563

Improved Lower Bounds for Learning from Noisy Examples: An Information-Theoretic Approach

564

Improved lower bounds for the capacitated lot sizing problem with setup times

565

Improved lower bounds for the link length of rectilinear spanning paths in grids

566

Improved low-lying energy levels determined from solar coronal forbidden and spin-forbidden lines in the 500–1500 Å range

567

Improved low-order models for heat conduction problems

568

Improved low-temperature hydrogen generation from NH3BH3 and TiO2 composites pretreated with water

569

Improved low-temperature performance of lithium-ion cells with quaternary carbonate-based electrolytes

570

Improved luminance and luminous efficiency of AC plasma display panel

571

Improved luminescence of Y2MoO6:Eu3+ by doping Li+ ions for light-emitting diode applications

572

Improved luminescence properties of pulsed laser deposited Y3(Al,Ga)5O12:Tb thin films by post deposition annealing

573

Improved luminescent efficiency of a red organic dye with modified molecular structure

574

Improved luminescent properties of red-emitting Ca0.54Sr0.16Eu0.08Gd0.12(MoO4)0.2(WO4)0.8 phosphor for LED application by charge compensation

575

Improved luminosity model and albedo for Saturn

576

Improved luminous transmittance and diminished yellow color in VO2 energy efficient smart thin films by Zn doping

577

Improved lumped analysis of transient heat conduction in a nuclear fuel rod

578

Improved lumped models for asymmetric cooling of a long slab by heat convection

579

Improved lumped models for combined convective and radiative cooling of a wall

580

Improved lumped models for transient combined convective and radiative cooling of multi-layer composite slabs

581

Improved lumped models for transient radiative cooling of a spherical body

582

Improved lumped parameter formulation for simplified LWR thermohydraulic analysis

583

Improved lumped-differential formulations in hyperbolic heat conduction

584

Improved lung function by urokinase infusion in canine lung transplantation using non-heart-beating donors

585

Improved Machinability in Hard Milling and Strategies for Steel Development

586

Improved magnetic coordinate representation for ideal ballooning stability calculations with the COBRA code Original Research Article

587

Improved magnetic properties of Cr3+ doped SrFe12O19 synthesized via microwave hydrothermal route

588

Improved magnetic trapped field in thin-wall YBCO single-domain samples by high-pressure oxygen annealing

589

Improved magnetization transfer in solid-state NMR with fast magic angle spinning

590

Improved magnetoelectricity by uniaxial magnetic field pressed and sintered composites in BaTiO3 (x)–BaFe12O19 (1 − x) system (x = 0.8, 0.6)

591

Improved magnetotransport in LCMO-Polymer (PPS) composite

592

Improved maize cultivated area estimation over a large scale combining MODIS–EVI time series data and crop phenological information

593

Improved MALDI-MS Analysis of Oligonucleotides through the Use of Fucose as a Matrix Additive

594

Improved management of asthma

595

IMPROVED MANAGEMENT OF MALAGASY EUCALYPTUS GRANDIS SEED ORCHARDS USING MICROSATELLITES AND PATERNITY ASSIGNMENT

596

Improved management of Vertisols in the semiarid tropics for increased productivity and soil carbon sequestration

597

Improved maneuverability of power plants for better grid stability

598

Improved manufacturing method and mechanical performances of carbon fiber reinforced lattice-core sandwich cylinder

599

Improved many-to-one sweeping

600

Improved Mapping Algorithms Performance in NoCs Design Based on Cellular Learning Automata

601

Improved market segmentation by fuzzifying crisp clusters: A case study of the energy market in Spain

602

Improved marketing decision making in a customer churn prediction context using generalized additive models

603

Improved mass constraints in the MSSM from vacuum stability

604

Improved mass transfer using a pore former in cathode catalyst layer in the direct methanol fuel cell

605

Improved materials characterisation through the application of geometry reconstruction to quasi-static and high-strain-rate tension tests

606

Improved Mathematical Model for Helicopter Flight Dynamics Applications

607

Improved mathematical model for mass transfer in fractured reservoirs during the gas injection process

608

Improved matrix inversion in image plane parallel MRI

609

Improved matrix pair undecidability results

610

Improved matrix reasoning is limited to training on tasks with a visuospatial component

611

Improved maximum entropy analysis with an extended search space

612

Improved maximum frequency estimation with application to instantaneous mean frequency estimation of surface electromyography

613

Improved maximum likelihood estimation of parameters in the Maxwell distribution

614

Improved Maximum Likelihood Frequency Offset Estimation Based on Likelihood Metric Design

615

Improved measurement characteristics in collimation testing using Lau interferometry and Fourier fringe analysis technique

616

IMPROVED MEASUREMENT METHODS FOR RAILWAY ROLLING NOISE

617

Improved measurement of Asteroid (4) Vesta’s rotational axis orientation

618

Improved measurement of formaldehyde in water-soluble polymers by high-performance liquid chromatography coupled with post-column reaction detection

619

Improved Measurement of Pressure Gradients in Aortic Coarctation by Magnetic Resonance Imaging

620

Improved measurement of the lifetime of the τ lepton

621

Improved measurement of the probability for gluon splitting into bb̄ in Z0 decays

622

Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method

623

Improved measurements for better decision on heat recovery solutions with heat pumps

624

Improved measurements of ICRF antenna coupling at ASDEX Upgrade and comparison with the ICRF coupling code TOPICA

625

Improved measurements of Na+ fluxes in plants using calixarene-based microelectrodes

626

Improved measurements of the drop size distribution of a freezing drizzle event

627

Improved Mechanical and Electrochemical Properties of Artificial Graphite Anode Using Water-Based Binders in Lithium-Ion Batteries

628

Improved mechanical and functional properties of elastomer/graphite nanocomposites prepared by latex compounding Original Research Article

629

Improved mechanical and swelling behavior of the composite hydrogels prepared by ionic monomer and acid-activated Laponite

630

Improved mechanical and tribological properties of tin–bronze journal bearing materials with newly developed tribaloy alloy additive

631

Improved mechanical behavior of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions

632

Improved mechanical behavior of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions

633

Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying

634

Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying

635

Improved mechanical performance of solution-processed MWCNT/Ag nanoparticle composite films with oxygen-pressure-controlled annealing Original Research Article

636

Improved mechanical performance: Shear behaviour of strain-hardening cement-based composites (SHCC)

637

Improved mechanical properties and hydrophilicity of electrospun nanofiber membranes for filtration applications by dopamine modification

638

Improved Mechanical Properties and Thermal Stability of Sm-Co High Temperature Magnets Resulting From Surface Modifications Original Research Article

639

Improved mechanical properties in cast Al–Si alloys by combined alloying of Fe and Cu

640

Improved Mechanical Properties in Nb2O5/V2O5 Doped Spinel Ferrites

641

Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression

642

Improved mechanical properties of bulk glassy alloys containing spherical pores

643

Improved mechanical properties of carbon nanotube/polymer composites through the use of carboxyl-epoxide functional group linkages

644

Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling

645

Improved mechanical properties of Cu matrix composites reinforced with β-Si3N4 whiskers

646

Improved mechanical properties of epoxy reinforced by low content nanodiamond powder

647

Improved mechanical properties of hydroxyapatite whisker-reinforced poly(l-lactic acid) scaffold by surface modification of hydroxyapatite

648

Improved mechanical properties of hydroxyapatite/poly(ɛ-caprolactone) scaffolds by surface modification of hydroxyapatite

649

Improved mechanical properties of retorted carrots by ultrasonic pre-treatments

650

Improved mechanical properties of retorted carrots by ultrasonic pre-treatments

651

Improved mechanical properties of SnO2:F thin film by structural modification Review Article

652

Improved mechanical properties of solution-cast silicone film reinforced with electrospun polyurethane nanofiber containing carbon nanotubes

653

Improved mechanical properties of Ti–15V–3Cr–3Sn–3Al alloy by electron beam welding process plus heat treatments and its microstructure evolution

654

Improved mechanical property and biocompatibility of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) for blood vessel tissue engineering by blending with poly(propylene carbonate)

655

Improved mechanical property and internal friction of pure Mg processed by ECAP

656

Improved Mechanical Reliability of the HeartMate XVE Left Ventricular Assist System

657

Improved mechanical strength and electrical conductivity of organogels containing carbon nanotubes Original Research Article

658

Improved mechanistic foam simulation with foam catastrophe theory

659

Improved medium for isolatin Rhizobium meliloti from soil

660

Improved medium for isolatin Rhizobium meliloti from soil

661

Improved membrane and electrode assemblies for proton exchange membrane fuel cells

662

Improved membrane fluidity of ionic polysaccharide bead-supported phospholipid bilayer membrane systems

663

Improved membrane structures for seawater desalination by studying the influence of sublayers Original Research Article

664

Improved merit order and augmented Lagrange Hopfield network for short term hydrothermal scheduling

665

Improved merit order and augmented Lagrange Hopfield network for unit commitment

666

Improved metabolic control reduces the number of postprandial apolipoprotein B-48-containing particles in Type 2 diabetes

667

Improved metal affinity of chelating adsorbents through graft polymerization

668

Improved metal cutting performance with bias-modulated textured Ti0.50Al0.50N multilayers

669

Improved Metal-Support Interaction in Pt/CeO2/SiO2 Catalysts after Zinc Addition

670

Improved metastability bounds on the Standard Model Higgs mass

671

Improved methane dehydrocondensation reaction on HMCM-22 and HZSM-5 supported rhenium and molybdenum catalysts Original Research Article

672

Improved methane fermentation of chicken manure via ammonia removal by biogas recycle

673

Improved methane storage capacities by sorption on wet active carbons Original Research Article

674

Improved methanol oxidation activity and stability of well-mixed PtRu catalysts synthesized by electroless plating method with addition of chelate ligands Original Research Article

675

Improved method “grid translation” for mapping environmental pollutants using a two-dimensional CAT scanning system

676

Improved method for absolute thermal contrast evaluation using Source Distribution Image (SDI)

677

Improved Method for Analysis of Airborne Asbestos Fibers Using Phase Contrast Microscopy and FTIR Spectrometry

678

Improved method for analyzing estrogens in water by liquid chromatography–electrospray mass spectrometry

679

Improved method for assaying maize plant resistance to maize rough dwarf disease by artificial inoculation and real-time RT-PCR

680

Improved method for carbohydrate-deficient transferrin determination in human serum by capillary zone electrophoresis

681

Improved method for comparing abundance data for soil zoological field studies

682

Improved Method for Detecting Fluorescent-Labeled Glycoprotein on Sodium Dodecyl Sulfate–Polyacrylamide Gel

683

Improved method for detecting the effect of gluinos in four-jet events at LEP

684

Improved method for detecting the effect of gluinos in four-jet events at LEP

685

Improved Method for Determining Food Protein Degree of Hydrolysis

686

Improved method for determining inversion layer mobility of electrons in trench MOSFETs

687

Improved Method for Direct Coronary Grafting Without CPB via Anterolateral Small Thoracotomy

688

Improved method for direct DNA sequencing of the human lipoprotein lipase gene using an auto DNA sequencer

689

Improved Method for Direct Haplotyping at the Vitamin D Receptor Gene Locus

690

Improved method for direct high-performance liquid chromatography assay of angiotensin-converting enzyme-catalyzed reactions

691

Improved method for evaluating antenna performance in mobile environment with consideration of polarization and phase

692

Improved method for extraction of aroma compounds in aged brandies and aqueous alcoholic wood extracts using ultrasound

693

Improved method for extraction of aroma compounds in aged brandies and aqueous alcoholic wood extracts using ultrasound Original Research Article

694

Improved method for fatty acid analysis in herbage based on direct transesterification followed by solid-phase extraction

695

Improved method for HgI2 crystal growth and detector fabrication

696

Improved method for HgI2 crystal growth and detector fabrication

697

Improved method for identifying and quantifying olive oil phenolic compounds and their metabolites in human plasma by microelution solid-phase extraction plate and liquid chromatography–tandem mass spectrometry

698

Improved method for kinetic parameters estimation of non-isothermal reaction: Application to residuum thermolysis

699

Improved method for measurement of human plasma xanthine oxidoreductase activity

700

Improved method for measuring the first-order hyperpolarizability of organic NLO materials in solution by using the hyper-Rayleigh scattering technique

701

Improved Method for Measuring Wheat Flour Dough Pressure-Sensitive Adhesiveness.

702

Improved method for optimum choice of free parameter in orthogonal approximations

703

Improved method for plasma malondialdehyde measurement by high-performance liquid chromatography using methyl malondialdehyde as an internal standard

704

Improved method for prediction of heavy metal recoveries from soil using high intensity magnetic separation (HIMS)

705

Improved method for prediction of rain attenuation in terrestrial links

706

Improved method for preparation of anhydrous silica by microwave irradiation with spectroscopic characterization and toxicity assay

707

Improved method for rapid determination of vitamin A in small samples of breast milk by high-performance liquid chromatography

708

Improved method for reliable predicting enthalpy of fusion of energetic compounds

709

IMPROVED METHOD FOR SELECTING SCALE FACTORS AND MODEL MATERIALS FOR SCALE MODELLING OF OUTDOOR SOUND PROPAGATION

710

Improved method for severe thermal shocks testing of ceramics by water quenching

711

Improved method for shipboard determination of iron in seawater by flow injection analysis Original Research Article

712

Improved method for simultaneous determination of l-arginine and its mono- and dimethylated metabolites in biological samples by high-performance liquid chromatography

713

Improved method for the conversion of pinacolboronic esters into trifluoroborate salts: facile synthesis of chiral secondary and tertiary trifluoroborates

714

Improved method for the determination of biogenic amines and polyamines in vegetable products by ion-pair high-performance liquid chromatography

715

Improved method for the determination of cyclic guanosine monophosphate (cGMP) in human plasma by LC–MS/MS

716

Improved Method for the Determination of Cypermethrin in Sarawak Soils

717

Improved method for the determination of kynurenic acid in rat plasma by column-switching HPLC with post-column fluorescence detection Original Research Article

718

Improved method for the determination of trace perchlorate in ground and drinking waters by ion chromatography

719

Improved method for the determination of zinc pyrithione in environmental water samples incorporating on-line extraction and preconcentration coupled with liquid chromatography atmospheric pressure chemical ionisation mass spectrometry

720

Improved method for the immunological detection of malondialdehyde-modified low-density lipoproteins in human serum

721

Improved method for the immunological detection of malondialdehyde-modified low-density lipoproteins in human serum Original Research Article

722

Improved method for the in vitro assessment of antioxidant activity of plant extracts by headspace solid-phase microextraction and gas chromatography–electron capture detection

723

Improved method for the measurement of large neutral amino acids in biological matrices

724

Improved method for the routine determination of acetylcholine and choline in brain microdialysate using a horseradish peroxidase column as the immobilized enzyme reactor

725

Improved method for the simultaneous determination of aflatoxins, ochratoxin A and Fusarium toxins in cereals and derived products by liquid chromatography–tandem mass spectrometry after multi-toxin immunoaffinity clean up

726

Improved method for the simultaneous determination of whey proteins, caseins and para-κ-casein in milk and dairy products by capillary electrophoresis

727

Improved method for the synthesis of (E)-cyclic-β-alkoxyacrylates under mild conditions

728

Improved method generating a free-form surface using integral equations Original Research Article

729

Improved method of an unusual conversion of aliphatic amines into alcohols

730

Improved method of bench solarization for the control of soilborne diseases in basil

731

Improved method of estimating deflection in prestressed steel I-beams

732

Improved method of estimating deflection in prestressed steel I-beams

733

Improved method of making soil monoliths using an acrylic bonding agent and proline auger

734

Improved method of measurement for tritiated water standardization by internal gas proportional counting

735

Improved method of sea level forecasting at Venice (Northern Adriatic Sea)

736

Improved method of the MALDI-TOF analysis of DNA with nanodot sample target plate

737

Improved method to demonstrate the structural integrity of high density fuel storage racks

738

Improved method to demonstrate the structural integrity of high density fuel storage racks Original Research Article

739

Improved Method to Increase AES System Speed

740

Improved method to measure aldehyde adducts to N-terminal valine in hemoglobin using 5-hydroxymethylfurfural and 2,5-furandialdehyde as model compounds

741

Improved method to quantitatively determine powerful odorant volatile thiols in wine by headspace solid-phase microextraction after derivatization

742

Improved methodologies for simulating unitary air conditioners at off-design conditions

743

Improved methodologies for synthesis of prenylated xanthones by microwave irradiation and combination of heterogeneous catalysis (K10 clay) with microwave irradiation

744

Improved methodologies for the calculation of critical eigenvalues in small signal stability analysis

745

Improved methodologies for the design of maneuver for stability and control simulations

746

Improved methodology for endurance time analysis: From time to seismic hazard return period

747

Improved methodology for generation of axial flux shapes in digital core protection systems

748

Improved methodology for the characterisation of transgenic Bt-11 maize cultivars using RP-HPLC profiles of albumin, globulin, prolamin, and glutelin protein fractions and chemometric analysis

749

Improved Methods for Approximating Node Weighted Steiner Trees and Connected Dominating Sets

750

Improved methods for bandwidth selection when estimating ROC curves

751

Improved methods for determination of rotational symmetries in macromolecules

752

Improved methods for determination of rotational symmetries in macromolecules

753

Improved methods for determining the concentration of 6-thioguanine nucleotides and 6-methylmercaptopurine nucleotides in blood

754

Improved methods for divisible load distribution on k-dimensional meshes using pipelined communications

755

Improved methods for elemental analysis of atmospheric aerosols for evaluating human health impacts of aerosols in East Asia

756

Improved methods for isolating and validating indigenous biomarkers in Precambrian rocks

757

Improved methods for mapped grids: Applied to highly excited vibrational states of diatomic molecules

758

Improved methods for selective dissolution of Mn oxides: applications for studying trace element associations

759

Improved methods for the extraction and analysis of isoflavones from soy-containing foods and nutritional supplements by reversed-phase high-performance liquid chromatography and liquid chromatography–mass spectrometry

760

Improved methods for the stereoselective synthesis of mannoheptosyl donors and their glycosides: toward the synthesis of the trisaccharide repeating unit of the Campylobacter jejuni RM1221 capsular polysaccharide

761

Improved methods for the synthesis and isolation of imidazolium based ionic salts

762

Improved methods for urinary atrazine mercapturate analysis—Assessment of an enzyme-linked immunosorbent assay (ELISA) and a novel liquid chromatography–mass spectrometry (LC–MS) method utilizing online solid phase extraction (SPE) Original Research Artic

763

Improved methods of assembly sequence determination for automatic assembly systems

764

Improved methods of measurement and analysis of conversion electron and β-particle spectra

765

Improved MEUF removal of naphthenic acids from produced water

766

Improved microcrystalline silicon TFTs

767

Improved micro-flame detection method for gas chromatography

768

Improved micro-flame detection method for gas chromatography Original Research Article

769

Improved microfluidic chip-based sequential-injection trapped-droplet array liquid–liquid extraction system for determination of aluminium

770

Improved microhardness and wear resistance of the as-deposited electroless Ni–P coating

771

Improved micromachined column design and fluidic interconnects for programmed high-temperature gas chromatography separations

772

Improved microstructural features in screen printed NdBCO thick films on YSZ substrates

773

Improved microstructure and mechanical properties of sheet metals in ultrasonic vibration enhanced biaxial stretch forming

774

Improved microstructure of cement-based composites through the addition of rock wool particles

775

Improved microwave dielectric properties of B2O3-doped Nd(Co1/2Ti1/2)O3 ceramics with near zero temperature coefficient of resonant frequency

776

Improved microwave dielectric properties of Nd(Mg0.5Sn0.5)O3 ceramics by substituting Mg2+ with Zn2+

777

Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide

778

Improved microwave digestion procedure for inductively coupled plasma mass spectrometric determinations of inorganic bromide residues in foodstuffs fumigated with methyl bromide Original Research Article

779

Improved microwave steam distillation apparatus for isolation of essential oils: Comparison with conventional steam distillation

780

Improved microwave-assisted wet digestion procedures for accurate Se determination in fish and shellfish by flow injection-hydride generation-atomic absorption spectrometry Original Research Article

781

Improved milk fouling simulation in a helical triple tube heat exchanger

782

Improved MILP models for two-machine flowshop with batch processing machines

783

Improved minima-hopping. TIP4P water clusters, with

784

Improved minimal augmentation procedure for the direct computation of critical points Original Research Article

785

Improved minimax estimation of powers of the variance of a multivariate normal distribution under the entropy loss function

786

IMPROVED MIRROR SOURCE METHOD IN ROOMACOUSTICS

787

Improved mixed model for longitudinal data analysis using shrinkage method

788

Improved MLPG_R method for simulating 2D interaction between violent waves and elastic structures

789

Improved mobility of the copper phthalocyanine thin-film transistor

790

Improved modal characterization of the constitutive parameters in multilayered plates

791

Improved Mode II delamination fracture toughness of composite materials by selective placement of protein-surface treated CNT

792

Improved model for calculating the coefficient of performance of a Peltier module

793

Improved model for improving the inter-instrument agreement of spectrocolorimeters Original Research Article

794

Improved model for mercury emission, transport and deposition

795

Improved model for plate-end shear of CFRP strengthened RC beams

796

Improved model for real-time substructuring testing system

797

Improved model for solute transport in heterogeneous porous media

798

Improved model for the analysis of air fluorescence induced by electrons

799

Improved model for the analysis of air fluorescence induced by electrons

800

Improved model for the analysis of back corona in pulse energised electrostatic precipitators

801

Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up

802

Improved model of multicomponent adsorption in reversed-phase liquid chromatography

803

Improved model prediction and RMPC design for LPV systems with bounded parameter changes

804

Improved model reduction and tuning of fractional-order controllers for analytical rule extraction with genetic programming

805

Improved model selection criteria for SETAR time series models

806

Improved model to determine turbine and compressor boundary conditions with the method of characteristics

807

Improved model to determine turbine and compressor boundary conditions with the method of characteristics

808

Improved modeling and solution methods for the multi-resource routing problem

809

Improved modeling by coupling imperfect models

810

Improved Modeling Capabilites with Reduced-Order Integration

811

Improved modeling of chamber transport for heavy-ion fusion

812

Improved modeling of chamber transport for heavy-ion fusion

813

Improved modeling of chamber transport for heavy-ion fusion

814

Improved modeling of clinical data with kernel methods

815

Improved modeling of flows down inclined planes

816

Improved modeling of microchannel plate response to hard X-rays

817

Improved modeling of microchannel plate response to hard X-rays

818

Improved Modeling of Side-Chain–Base Interactions and Plasticity in Protein–DNA Interface Design

819

Improved modeling of the effect of R-ratio on crack growth rate

820

Improved modelling of detachment and neutral-dominated regimes using the SOLPS B2–Eirene code

821

Improved modelling of downburst outflows for wind engineering applications using a cooling source approach

822

Improved modelling of ship SO2 emissions—a fuel-based approach

823

Improved modelling of the loading spectra using a mixture model approach

824

Improved modelling of the Messinian Salinity Crisis and conceptual implications

825

Improved modelling of the neutron spectrum for the ASP accelerator

826

Improved modelling of vapour-liquid equilibria up to the critical region. Application to the CO2CH4N2 system

827

Improved model-order reduction by using spacial information in moments

828

Improved models for fractal colloidal agglomeration: computationally efficient algorithms

829

Improved models for the prediction of activity coefficients in nearly athermal mixtures Part II. A theoretically-based GE-model based on the van der Waals partition function

830

Improved models of the piezomagnetic field for the 2011 Mw 9.0 Tohoku-oki earthquake

831

Improved models to predict gas–water relative permeability in fractures and porous media

832

Improved modification direction methods

833

Improved modification of the single-switch AC-AC converter for induction heating applications

834

Improved modular synthesis of thieno[3,2-b]pyrroles and thieno[2,3-b]pyrroles

835

Improved modules for the blanket of RTO/RC ITER

836

Improved moisture resistance of SrS:Eu2+ phosphors with nanoscale SiO2 coating

837

Improved moisture resistance of SrSO4:Sm3+ phosphors coated with SiO2

838

Improved molten carbonate fuel cell performance via reinforced thin anode

839

Improved molten salt synthesis (MSS) for SnO2 nanorods and nanotwins

840

Improved moment estimates for invariant measures of semilinear diffusions in Hilbert spaces and applications

841

Improved Moment Strength Prediction of Composite Steel Plate Girders in Positive Bending

842

Improved monitoring of batch processes by incorporating external information

843

Improved monitoring of HABs using autonomous underwater vehicles (AUV)

844

Improved monitoring of surface ozone by joint assimilation of geostationary satellite observations of ozone and CO

845

Improved monitoring of vegetation dynamics at very high latitudes: A new method using MODIS NDVI

846

Improved monochromatic loose cycle partitions in hypergraphs

847

Improved monodispersity of size selected aerosol particles with a new charging and selection scheme for tandem DMA setup

848

Improved Montgomery modular inverse algorithm

849

Improved mood states with lamotrigine in patients with epilepsy

850

Improved Morphological Method in Motion Detection

851

Improved Morphological, Structural, and Optical Features of ErxCuNiO3 {x= 0, 0.5, 0.7, 0.9}

852

Improved morphology of plated lithium in poly(vinylidene fluoride) based electrolyte

853

Improved motion information-based infrared dim target tracking algorithms

854

Improved mould-level control in a continuous steel casting line

855

Improved MPEG-4 still texture image coding under noisy environment

856

Improved MR image reconstruction from sparsely sampled scans based on neural networks

857

Improved MR imaging for patients with metallic implants☆

858

Improved multi-ant-colony algorithm for solving multi-objective vehicle routing problems

859

Improved Multibody Dynamics for Investigating Energy Dissipation in Train Collisions Based on Scaling Laws

860

Improved multi-camera smart tra system for resilient citiesc surveillance

861

Improved Multicomponent Multiphase Lattice Boltzmann Model for Physical Foaming Simulation

862

Improved multi-level electronic structure methods (MLSEn + d) for atomization energies and reaction energy barriers

863

Improved multi-level Newton solvers for fully coupled multi-physics problems

864

Improved multilevel security with latent semantic indexing

865

Improved Multi-Mode anomalous transport module for tokamak plasmas Original Research Article

866

Improved multiple test procedures for discrete distributions: New ideas and analytical review

867

Improved multiquadric approximation for partial differential equations

868

Improved multiquadric method for elliptic partial differential equations via PDE collocation on the boundary

869

Improved multislice calculations for including higher-order Laue zones effects

870

Improved multislice calculations for including higher-order Laue zones effects

871

Improved multitasking following prefrontal tDCS

872

Improved multivariable quantitative feedback design for tracking error specifications

873

Improved Multivariate Prediction in a General Linear Model with an Unknown Error Covariance Matrix

874

Improved Multivariate Prediction under a General Linear Model

875

Improved Mutasynthetic Approaches for the Production of Modified Aminocoumarin Antibiotics Original Research Article

876

Improved MVT pruning method for MC-EZBC

877

Improved myocardial contrast with second harmonic transient ultrasound response imaging in humans using intravenous perfluorocarbon-exposed sonicated dextrose albumin

878

Improved myocardial ischemia/reperfusion injury in mice lacking tumor necrosis factor-α

879

Improved myocardial performance during repetitive exercise testing: The role of extracellular superoxide dismutase activity in a model of exercise-induced myocardial preconditioning

880

Improved Myocardial Tolerance to Ischaemia in the Diabetic Rabbit

881

Improved N2 fixation in 2,4-D treated wheat roots associated with Azospirillum lipoferum: Studies of colonization using reporter genes

882

Improved N2 fixation in 2,4-D treated wheat roots associated with Azospirillum lipoferum: Studies of colonization using reporter genes

883

Improved NARP-HPLC method for separating triglycerides of palm olein and its solid fractions obtained at low temperature storage

884

Improved NARX-ANFIS Network structure with Genetic Algorithm to optimizing Cash Flow of ATM Model

885

Improved native UV laser induced fluorescence detection for single cell analysis in poly(dimethylsiloxane) microfluidic devices

886

Improved n-butanol production by solvent tolerant Clostridium beijerinckii

887

Improved near surface characterization of shallow arsenic distribution by SIMS depth profiling

888

Improved near surface soil characterizations using a multilayer soil resistivity model

889

Improved near-infrared methane band models and k-distribution parameters from 2000 to 9500 cm−1 and implications for interpretation of outer planet spectra

890

Improved near-term Earth rotation predictions using atmospheric angular momentum analysis and forecasts

891

Improved neighbor detection algorithm for AODV routing protocol

892

Improved neighbor list algorithm in molecular simulations using cell decomposition and data sorting method Original Research Article

893

Improved network resilience of wireless mesh networks using MPLS and Fast Re-Routing techniques

894

Improved Neural Network and the Pontryagin s minimum Principle for Solve Fuzzy Optimal Control ‎Problems‎

895

Improved neural-aided sliding mode controller for autolanding under actuator failures and severe winds

896

Improved neural-network model predicts dewpoint pressure of retrograde gases

897

Improved neurohormonal markers of ventricular function after restoring sinus rhythm by the Maze procedure

898

Improved neuromagnetic detection of fetal and neonatal auditory evoked responses

899

Improved neuron MOS-transistor structures for integrated neural network circuits

900

Improved new qualitative results on stochastic delay differential equations of second order

901

Improved Newton method for optimal power flow problem

902

Improved Newton’s method with exact line searches to solve quadratic matrix equation

903

Improved Newton’s method without direct function evaluations

904

Improved NH3, C2H5OH, and CH3COCH3 sensing properties of SnO2 nanofibers by adding block copolymer P123

905

Improved Nickel-Catalyzed Cross-Coupling Reaction Conditions between ortho-Substituted Aryl Iodides/Nonaflates and Alkylzinc Iodides in Solution and in the Solid-Phase

906

Improved Nitrations Using Metal Nitrate–Sulfuric Acid Systems

907

Improved NMR chemical shifts in density functional theory

908

Improved noble gas polarization production for porous and granular media studies using narrowed-line VBG laser sources

909

Improved nodal expansion method for solving neutron diffusion equation in cylindrical geometry Original Research Article

910

Improved Noise Reduction in Audio Signals Using Spectral Resolution Enhancement With Time-Domain Signal Extrapolation

911

Improved Noninvasive Assessment of Coronary Artery Bypass Grafts With 64-Slice Computed Tomographic Angiography in an Unselected Patient Population Original Research Article

912

Improved nonisotopic PCR-SSCP for screening of p53 mutations

913

Improved non-linear behaviour of ZnO-based varistor thick films prepared by tape casting and screen printing

914

Improved Nonlinear Equation Method for Numerical Prediction of Jominy End-Quench Curves Original Research Article

915

IMPROVED NONLINEAR HETEROGENEOUS MODEL FOR WASTEWATER TREATMENT

916

Improved nonlinear plastic hinge analysis of space frame structures

917

Improved Nonnegative Estimation of Variance Components in Balanced Multivariate Mixed Models

918

Improved normal-phase and reversed-phase gradient high-performance liquid chromatography procedures for the analysis of retinoids and carotenoids in human serum, plant and animal tissues

919

Improved NOx reduction over the staged Ag/Al2O3 catalyst system Original Research Article

920

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

921

Improved n-Si/oxide junctions for environmentally safe solar energy conversion

922

Improved null-collision technique in the direct simulation Monte Carlo method: Application to vibrational relaxation of nitrogen

923

Improved numerical evaluation of the radial groundwater flow equation

924

Improved numerical integration for locking treatment in isogeometric structural elements, Part I: Beams

925

Improved numerical method for the Traction Boundary Integral Equation by application of Stokesʹ theorem

926

Improved numerical prediction of ash formation and deposition using a novel developed char fragmentation model

927

Improved numerical simulation of aerosol deposition in an idealized mouth–throat

928

Improved numerical simulations of incompressible flows based on viscous/inviscid interaction procedures

929

Improved numerical solver for Kansaʹs method based on affine space decomposition

930

IMPROVED NUTRIENT INTAKE IN OLDER OBESE ADULTS UNDERGOING A STRUCTURED DIET AND EXERCISE INTENTIONAL WEIGHT LOSS PROGRAM

931

Improved O2 sensing performance by modifying P–P ligand in [Cu(N–N)(P–P)] complex

932

Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics

933

Improved o-chlorobenzoylformate bioreduction by stabilizing aldo-keto reductase YtbE with additives

934

Improved Ocular Bioavailability of Moxifloxacin HCl using PLGA Nanoparticles: Fabrication, Characterization, In-vitro and In-vivo Evaluation

935

Improved Odor Sensitivity in Attention-Deficit/Hyperactivity Disorder

936

Improved of color properties on Sardinella lemuru oil during adsorbent refining using magnesol xl

937

Improved oil recovery by adsorption–desorption in chemical flooding

938

IMPROVED OIL RECOVERY BY APPLICATION OF ULTRASONIC STIMULATED WATERFLOODING

939

Improved oil recovery by application of vibro-energy to waterflooded sandstones

940

Improved oil recovery using alkaline solutions in limestone medium

941

Improved one-band self-consistent effective mass methods for hole quantization in pMOSFET

942

Improved one-delayed-group neutron kinetic model for small reactivity states

943

Improved open circuit voltage of the photovoltaic device using ferrocene as a donor material

944

Improved open-circuit voltage and efficiency in organic solar cells using a phosphine oxide based interlayer material

945

Improved operating lifetime of phosphorescent OLED by novel anode coating

946

Improved operation of power transformer protection using artificial neural network

947

Improved operational efficiency through elimination of waste and redundancy

948

Improved operations through manpower management in the oil sector

949

Improved optical and structural properties of ZnO thin films by rapid thermal annealing

950

Improved optical limiting in dispersible carbon nanotubes and their metal oxide hybrids Original Research Article

951

IMPROVED OPTICAL PROBE FOR MEASURING PHYTOPLANKTON SUSPENSION CONCENTRATIONS BASED ON OPTICAL FLUORESENSCE AND ABSORPTION

952

Improved optical properties of CdS quantum dots by ligand exchange

953

Improved optical response and photocatalysis for N-doped titanium oxide (TiO2) films prepared by oxidation of TiN

954

Improved optical transmittance of Al-doped ZnO thin films by use of ZnO nanorods

955

Improved optimality checkpoint for decision making by using the sub-triangular form

956

Improved optimisation approach to the robust H/sub 2//H/sub /spl infin// control problem for linear systems

957

Improved optimisation method using genetic algorithms for mass transit signalling block-layout design

958

Improved optimisation of excitation sequences in speech and audio coders

959

Improved optimization of polycyclic aromatic hydrocarbons (PAHs) mixtures resolution in reversed-phase high-performance liquid chromatography by using factorial design and response surface methodology

960

Improved optimization of soft-partition-weighted-sum filters and their application to image restoration

961

Improved Optimization Process for Nonlinear Model Predictive Control of PMSM

962

Improved optimization strategies for autofocusing motion compensation in MRI via the analysis of image metric maps

963

Improved Optimization Strategies for Generating Practical Water-Usage and -Treatment Network Structures

964

Improved OR education through the use of spreadsheet models

965

Improved oral bioavailability of core–shell structured beads by redispersion of the shell-forming nanoparticles: Preparation, characterization and in vivo studies

966

Improved oral delivery of clonazepam through liquisolid powder compact formulations: In-vitro and ex-vivo characterization

967

Improved oral delivery of valsartan from maltodextrin based proniosome powders

968

Improved orbit predictions using two-line elements Original Research Article

969

Improved orbital parameters of accreting millisecond pulsar SAX J1808.4-3658 Original Research Article

970

Improved organic optocouplers based on a deep blue fluorescent OLED and an optimized bilayer heterojunction photosensor

971

Improved orientation estimation for texture planes using multiple vanishing points

972

Improved orthodontic stainless steel wires coated with inorganic fullerene-like nanoparticles of WS2 impregnated in electroless nickel–phosphorous film

973

Improved orthogonal array based simulated annealing for design optimization

974

Improved orthokinetic coagulation model for fractal colloids: Aggregation and breakup

975

Improved oscillator strengths and wavelengths for Os I and Ir I, and new results on early r-process nucleosynthesis

976

Improved osseointegration in ion implantation-treated dental implants

977

Improved osteoblast cell affinity on plasma-modified 3-D extruded PCL scaffolds

978

Improved osteogenic differentiation of human marrow stromal cells cultured on ion-induced chemically structured poly-ε-caprolactone

979

Improved outcome after acute coronary syndromes with an intensive versus standard lipid-lowering regimen: results from the Pravastatin or Atorvastatin Evaluation and Infection Therapy–Thrombolysis in Myocardial Infarction 22 (PROVE IT–TIMI 22) trial

980

Improved outcome by identification of high-risk nonocclusive mesenteric ischemia, aggressive reexploration, and delayed anastomosis

981

Improved outcome for children with acute lymphoblastic leukemia after risk-adjusted intensive therapy : A single-institution experience

982

Improved outcome of children with acute myeloid leukemia treated on 2 consecutive protocols

983

Improved outcome with organs from carbon monoxide poisoned donors for intrathoracic transplantation

984

Improved Outcomes After Aortic Valve Surgery for Chronic Aortic Regurgitation With Severe Left Ventricular Dysfunction Original Research Article

985

Improved Outcomes for Cardiac Arrest in Children: Share the Baton With the Bystander

986

Improved outcomes for women undergoing contemporary percutaneous coronary intervention: A report from the national heart, lung, and blood institute dynamic registry

987

Improved outcomes in patients with acute allergic syndromes who are treated with combined H1 and H2 antagonists

988

Improved outcomes in peripartum cardiomyopathy with contemporary

989

Improved Outcomes of Pediatric Dilated Cardiomyopathy and Heart Transplantation

990

Improved outcomes of pediatric dilated cardiomyopathy with utilization of heart transplantation Original Research Article

991

Improved outcomes with an implantable left ventricular assist system: a multicenter study

992

Improved outcomes with early vocal fold medialization for vocal fold paralysis after thoracic surgery

993

Improved outcomes with the Prolene Hernia System mesh compared with the time-honored Lichtenstein onlay mesh repair for inguinal hernia repair

994

Improved outcoupling of light in organic light emitting devices, utilizing a holographic DFB-structure

995

Improved Overshoot Estimation in Pole Placements and Its Application in Observer-Based Stabilization for Switched Systems

996

Improved oxidation resistance of a nanocrystalline chromite-coated ferritic stainless steel

997

Improved oxidation resistance of conducting polychloroprene composites

998

Improved oxidation resistance of Cu60Zr30Ti10 BMG with plasma immersion ion implantation

999

Improved oxidation resistance of ferritic steels with LSM coating for high temperature electrochemical applications

1000

Improved oxidation resistance of thermoelectric skutterudites coated with composite glass

بازگشت