بر اساس عنوان

1
Creep and creep fracture of commercial aluminium alloys
2
Creep and creep fracture of polycrystalline copper
3
Creep and creep modelling of a multimodal nickel-base superalloy Original Research Article
4
Creep and creep recovery properties of polystyrene aggregate concrete
5
Creep and creep-fatigue cracking behaviour of two structural steels Original Research Article
6
Creep and damage accumulation in orthotropic composites under cyclic loading
7
Creep and drying shrinkage characteristics of concrete produced with coarse recycled concrete aggregate
8
Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads
9
Creep and failure prediction of Diestian ferruginous sandstone: Modelling and repair options
10
Creep and fatigue behavior of SiC fiber reinforced SiC composite at high temperatures
11
Creep and fatigue behavior of SiC fiber reinforced SiC composite at high temperatures
12
Creep and fatigue interaction in the PWA1484 single crystal nickel-base alloy
13
Creep and fatigue lifetime analysis of directionally solidified superalloy and its brazed joints based on continuum damage mechanics at elevated temperature
14
Creep and fatigue properties of high temperature silicides and their composites
15
Creep and fatigue properties of high temperature silicides and their composites
16
Creep and fracture in concrete: a fractional order rate approach
17
Creep and impact properties of wood fibre–polypropylene composites: influence of temperature and moisture content
18
Creep and long-term strength of herringbone lock joints of gas-turbine engines under the combined action of static and cyclic loads
19
Creep and Long-Term Strength of Press-Powder Composites
20
Creep and microstructure of near-gamma TiAl alloys
21
Creep and microstructure of Nextel™ 720 fiber at elevated temperature in air and in steam Original Research Article
22
Creep and physical aging behaviour of PA6 nanocomposites
23
Creep and precipitation behaviors of AL6XN austenitic steel at elevated temperatures
24
Creep and rate of loading effects on geogrid- reinforced sand
25
Creep and recovery behavior characterization of asphalt mixture in compression
26
Creep and recovery behaviors of a polythiophene-based electrorheological fluid
27
Creep and Recovery Characteristics of Chicken Meat Frankfurters
28
Creep and recovery experimental investigation of low oil content food emulsions
29
Creep and recovery of polypropylene/carbon nanotube composites
30
Creep and recovery of polystyrene composites filled with graphene additives
31
Creep and rupture behavior of a commercial aluminum–magnesium alloy A5083 at constant applied stress
32
Creep and rupture behavior of a commercial aluminum–magnesium alloy A5083 at constant applied stress
33
Creep and rupture behavior of a commercial aluminum–magnesium alloy A5083 at constant applied stress
34
Creep and shrinkage analysis of curved composite beams with partial interaction
35
Creep and shrinkage analysis of curved composite beams with partial interaction
36
Creep and shrinkage behaviour of CFRP-reinforced mortar
37
Creep and shrinkage effect on adhesive stresses in RC beams strengthened with composite laminates
38
Creep and shrinkage effect on the dynamic analysis of reinforced concrete slab-and-beam structures
39
Creep and shrinkage of concrete: physical origins and practical measurements
40
Creep and shrinkage of concrete: physical origins and practical measurements Original Research Article
41
Creep and shrinkage of recycled aggregate concrete
42
Creep and sintering resistance of a Ce added anode electrode for molten carbonate fuel cell
43
Creep and strain-dependent microstructures of synthetic anorthite–diopside aggregates
44
Creep and strength of ZrP2O7 bonded Si3N4 porous ceramics at 800–1000 °C
45
Creep and Stress Redistribution Analysis of Thick-Wall FGM Spheres Subjected to Mechanical Load and Heat Flux – An Analytical Approach
46
Creep and Stress Relaxation Behavior of Polypropylene, Metallocene-Prepared Polyethylene and their Blends
47
Creep and stress relaxation in free-standing thin metal films controlled by coupled surface and grain boundary diffusion Original Research Article
48
Creep and stress-rupture behavior of Y2O3–Nd2O3-doped silicon nitrides with different additive contents
49
Creep and substructure in 5 vol.% SiC–2124 Al composite
50
Creep and substructure in 5 vol.% SiC–2124 Al composite
51
Creep and superplasticity in a spray-cast aluminum alloy processed by ECA pressing
52
Creep and superplasticity in nanocrystalline materials: current understanding and future prospects
53
Creep and superplasticity in nanocrystalline materials: current understanding and future prospects
54
Creep and tensile behaviors of Fe–Cr–Al foils and laser microwelds at high temperature
55
Creep and tensile behaviour of austenitic Fe–Cr–Ni stainless steels
56
Creep and the anomalous yield stress of Ni3Ga
57
Creep and the anomalous yield stress of Ni3Ga
58
Creep and the in vivo assessment of human patellar tendon mechanical properties
59
Creep and thermomechanical fatigue properties of in situ Cu6Sn5 reinforced lead-free composite solder
60
Creep and Viscoelastic Behaviour of Human Dentin
61
Creep and visco-elastic behaviour of LPS-SiC sintered with Lu2O3–AlN additive
62
Creep and wear behaviour of ethylene–butene copolymers reinforced by ultra-high molecular weight polyethylene fibres
63
Creep as an extension of hot working: A unified approach to high temperature deformation of AZ31 alloy
64
Creep associated changes in intervertebral disc bulging obtained with a laser scanning device
65
Creep at low temperatures: unzipping of dislocations, inertia, and criticality processes
66
Creep behavior and deformation mechanisms in a nanocluster strengthened ferritic steel Original Research Article
67
Creep behavior and deformation microstructures of Mg–Y alloys at 550 K
68
Creep behavior and deformation microstructures of Mg–Y alloys at 550 K
69
Creep behavior and its correlation with defect chemistry of La0.58Sr0.4Co0.2Fe0.8O3−δ Original Research Article
70
Creep behavior and manufacturing parameters of wood flour filled polypropylene composites
71
Creep behavior and microstructural damage of martensitic P92 steel weldment
72
Creep behavior and microstructural evolution of deformed Al–Cu–Mg–Ag heat resistant alloy
73
Creep behavior and microstructural stability of Al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys
74
Creep behavior and microstructural stability of Al-Cu-Mg-Ag and Al-Cu-Li-Mg-Ag alloys
75
Creep behavior and microstructure evolution at 750 °C in a new precipitation-strengthened heat-resistant austenitic stainless steel
76
Creep behavior and related structural defects in Al2O3–Ln2O3 (ZrO2) directionally solidified eutectics (Ln = Gd, Er, Y)
77
Creep behavior and stability of MX precipitates at high temperature in 9Cr–0.5Mo–1.8W–VNb steel
78
Creep behavior and stability of MX precipitates at high temperature in 9Cr–0.5Mo–1.8W–VNb steel
79
Creep behavior and surface characterization of a laser surface nitrided Ti–6Al–4V alloy
80
Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy
81
Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy
82
Creep behavior and threshold stress of an extruded Al–6Mg–2Sc–1Zr alloy
83
Creep behavior during the eutectoid transformation of albite: Implications for the slab deformation in the lower mantle
84
Creep behavior in an extruded β solid solution Nb–Ti base alloy
85
Creep behavior in an extruded β solid solution Nb–Ti base alloy
86
Creep behavior in interlaminar shear of a Hi-Nicalon™/SiC–B4C composite at 1200 °C in air and in steam
87
Creep behavior in interlaminar shear of Nextel™720/alumina ceramic composite at elevated temperature in air and in steam
88
Creep behavior in near-nanostructured Al 5083 alloy
89
Creep behavior modeling of silica fume containing Al2O3–MgO refractory castables
90
Creep behavior of 2.25Cr1Mo steel—Effects of thermal ageing and pre-strain
91
Creep behavior of 316 austenitic stainless steel under variant operating conditions
92
Creep behavior of a 4.5%-Re single crystal nickel-based superalloy at intermediate temperatures
93
Creep behavior of a carbon-derived Si3N4/SiC nanocomposite
94
Creep behavior of a cast 359/SiC/10p aluminum composite
95
Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part I: experimental development and creep-rupture
96
Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part I: experimental development and creep-rupture
97
Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part I: experimental development and creep-rupture
98
Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part II: Creep-deformation and model development
99
Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part II: Creep-deformation and model development
100
Creep behavior of a continuous strand, swirl mat reinforced polymeric composite in simulated automotive environments for durability investigation: Part II: Creep-deformation and model development
101
Creep behavior of a dispersion-strengthened Cu–Ti–Al alloy obtained by reaction milling
102
Creep behavior of a poled PZT wafer under longitudinal tensile stress and through thickness electric field
103
Creep behavior of a single crystal nickel-based superalloy containing 4.2% Re
104
Creep behavior of a zirconium diboride–silicon carbide composite
105
Creep behavior of adhesives used for external FRP strengthening of RC structures
106
Creep behavior of AE42 based hybrid composites
107
Creep behavior of Al-rich FeAl intermetallics
108
Creep behavior of Al-rich FeAl intermetallics
109
Creep behavior of an A286 type stainless steel
110
Creep behavior of an Al-6061 metal matrix composite produced by liquid metallurgy processing
111
Creep behavior of an Al-6061 metal matrix composite produced by liquid metallurgy processing
112
Creep behavior of an oxide dispersion strengthened Ni3Al ordered intermetallic material
113
Creep behavior of an oxide dispersion strengthened Ni3Al ordered intermetallic material
114
Creep behavior of an oxide-dispersion-strengthened Ni3Al-based alloy
115
Creep behavior of an oxide-dispersion-strengthened Ni3Al-based alloy
116
Creep behavior of AS41 alloy matrix nano-composites
117
Creep behavior of austenitic stainless steel weld metals as a function of ferrite content
118
Creep behavior of AZ31 magnesium alloy in low temperature range between 423 K and 473 K
119
Creep behavior of bagasse fiber reinforced polymer composites
120
Creep behavior of Biodegradable Triple-component Nanocomposites Based on PLA/PCL/bioactive Glass for ACL Interference Screws
121
Creep behavior of bisphenol E cyanate ester/alumina nanocomposites
122
Creep behavior of Bure clayey rock
123
Creep behavior of carbon fiber/epoxy matrix composites
124
Creep behavior of carbon-fiber-reinforced polyetheretherketone (PEEK) [ ±45]4s laminated composites (I)
125
Creep behavior of ceramics studied by mechanical loss measurements
126
Creep behavior of ceramics studied by mechanical loss measurements
127
Creep behavior of ceramics studied by mechanical loss measurements
128
Creep behavior of commercial FeCrAl foils: Beneficial and detrimental effects of oxidation
129
Creep Behavior of Cylinders Subjected to an Internal Pressure and a Two Dimensional Temperature Field Using First Order Shear Deformation Theory
130
Creep Behavior of Double Tempered 8%Cr-2%WVTa Martensitic Steel
131
Creep behavior of extruded Al–6Mg–1Sc–1Zr–10 vol.% SiCp composite
132
Creep Behavior of Extruded Sheets of Magnesium Alloys Containing La-Rich Mischmetal
133
Creep behavior of Fe–C alloys at high temperatures and high strain rates
134
Creep behavior of Fe–C alloys at high temperatures and high strain rates
135
Creep behavior of high-strength low-alloy steel at elevated temperatures
136
Creep behavior of hot extruded Al-Al2O3 nanocomposite powder
137
Creep behavior of in situ TiCP/2618 aluminum matrix composite
138
Creep behavior of INCOLOY alloy 617
139
Creep behavior of in-situ Al2O3 and TiB2 particulates mixture-reinforced aluminum composites
140
Creep behavior of in-situ Al2O3 and TiB2 particulates mixture-reinforced aluminum composites
141
Creep behavior of intermetallic FeAl and FeAlCr alloys
142
Creep behavior of intermetallic FeAl and FeAlCr alloys
143
Creep behavior of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) at 573 K
144
Creep behavior of Mg–2 wt.%Nd binary alloy
145
Creep behavior of Mg–2Nd–0.5Zn–0.4Zr at ambient temperature
146
Creep behavior of Mg–9Gd–1Y–0.5Zr (wt.%) alloy piston by squeeze casting
147
Creep Behavior of Mullite Short Fiber Reinforced ZL109 Alloy Composites at High Temperature
148
Creep behavior of nanocrystalline monoclinic ZrO2
149
Creep behavior of nanocrystalline nickel at 290 and 373 K
150
Creep behavior of nanocrystalline nickel at 290 and 373 K
151
Creep behavior of nanostructured Mg alloy at ambient and low temperature
152
Creep behavior of near-peritectic Sn–5Sb solders containing small amount of Ag and Cu
153
Creep behavior of new kinds of Ni–Co-base superalloys
154
Creep behavior of NextelTM610/Monazite/Alumina composite at elevated temperatures
155
Creep behavior of Nextel™720/alumina ceramic composite with ±45° fiber orientation at 1200 °C
156
Creep behavior of Nextel™720/alumina–mullite ceramic composite with ±45° fiber orientation at 1200 °C
157
Creep behavior of Ni-12 wt.% Al anodes for molten carbonate fuel cells
158
Creep behavior of niobium-modified zirconium alloys
159
Creep behavior of ODS materials: A study of dislocations/precipitates interactions
160
Creep behavior of oxide dispersion strengthened 8Cr–2WVTa and 8Cr–1W steels
161
Creep behavior of pack cementation aluminide coatings on Grade 91 ferritic–martensitic alloy
162
Creep behavior of poly(methyl methacrylate) with growing damage
163
Creep behavior of pultruded GFRP elements – Part 1: Literature review and experimental study Review Article
164
Creep behavior of pultruded GFRP elements – Part 2: Analytical study
165
Creep behavior of pure magnesium and Mg–Al alloys in active environments
166
Creep behavior of pure magnesium and Mg–Al alloys in active environments
167
Creep behavior of reduced activation ferritic/martensitic steels irradiated at 573 and 773 K up to 5 dpa
168
Creep behavior of reduced activation martensitic steel F82H injected with a large amount of helium
169
Creep behavior of SiC whisker-reinforced Si3N4/BN fibrous monolithic ceramics
170
Creep behavior of single crystal superalloy specimen under temperature gradient condition
171
Creep behavior of spray-cast 7XXX aluminum alloy
172
Creep behavior of spray-deposited AlLi/SiCp composite
173
Creep behavior of the F82H steel under irradiation with 17 MeV protons at 300 °C
174
Creep behavior of the intact and meniscectomy knee joints
175
Creep behavior of Ti–40Al–10Nb titanium aluminide intermetallic alloy
176
Creep Behavior of Ti--40Al--16Nb Intermetallic Alloy and Strengthening Effects of Minor Sc
177
Creep behavior of Ti–6Al–2Sn–4Zr–2Mo: I. The effect of nickel on creep deformation and microstructure Original Research Article
178
Creep behavior of Ti–6Al–4V and a comparison with titanium matrix composites
179
Creep behavior of TiCxN1−x–CoTi cermets synthesized by mechanically induced self-sustaining reaction
180
Creep behavior of two Cu-2 vol% TiC alloys obtained by reaction milling and extrusion
181
Creep behavior of ultra-fine grained Zn–4.5Al
182
Creep behavior of unidirectional and angle-ply T800H/3631 laminates at high temperature and simulations using a phenomenological viscoplasticity model
183
Creep Behavior of Zr-1.5Nb-0.4Sn-0.1Fe-0.1Cu Alloy
184
Creep behavior of γ-TiAl sheet material with differently spaced fully lamellar microstructures
185
Creep behavior of γ-TiAl sheet material with differently spaced fully lamellar microstructures
186
Creep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling rates
187
Creep behaviors and effect factors of single crystal nickel-base superalloys
188
Creep behaviors and role of dislocation network in a powder metallurgy Ni-based superalloy during medium-temperature
189
Creep behaviors and stress regions of hybrid reinforced high temperature titanium matrix composite
190
Creep Behaviors of FGH95 Powder Ni-Base Superalloy
191
Creep behaviors of highly pure aluminum at lower temperatures
192
Creep behaviors of highly pure aluminum at lower temperatures
193
Creep behaviors of Mg–5Li–3Al–(0,1)Ca alloys
194
Creep behaviour and creep microstructures of a high-temperature titanium alloy Ti–5.8Al–4.0Sn–3.5Zr–0.7Nb–0.35Si–0.06C (Timetal 834): Part I. Primary and steady-state creep
195
Creep behaviour and failure modelling of modified 9Cr1Mo steel
196
Creep behaviour and microstructural evolution in AISI 316LN + Nb steels at 650 °C
197
Creep behaviour and related high temperature microstructural stability of Ti–46Al–9Nb sheet material
198
Creep behaviour at elevated temperatures of an Al-Cu-Mg-Ag alloy
199
Creep behaviour at elevated temperatures of an Al-Cu-Mg-Ag alloy
200
Creep behaviour determination of monolayer plasma-sprayed coatings under dynamic or static loads
201
Creep behaviour leading to Type IV cracking for service-exposed 1.25Cr–0.5Mo steel welds
202
Creep behaviour of 14Cr–15Ni–Ti stainless steel at 923 K
203
Creep behaviour of a 2124 Al alloy reinforced by 20 vol.% silicon carbide particulates
204
Creep behaviour of a 2124 Al alloy reinforced by 20 vol.% silicon carbide particulates
205
Creep behaviour of a cast TiAl-based alloy for industrial applications
206
Creep behaviour of a new air-hardenable intermetallic Ti–46Al–8Ta alloy
207
Creep behaviour of a Ni15Cr solid solution alloy at low stresses and intermediate temperatures
208
Creep behaviour of a Ni15Cr solid solution alloy at low stresses and intermediate temperatures
209
Creep behaviour of a QE22–SiC particle reinforced composite investigated by acoustic emission and scanning electron microscopy
210
Creep behaviour of a QE22–SiC particle reinforced composite investigated by acoustic emission and scanning electron microscopy
211
Creep behaviour of a SiC/Si-B-C composite with a self-healing multilayered matrix
212
Creep behaviour of alumina/YAG composites prepared by different sintering routes
213
Creep behaviour of alumina/YAG nanocomposites obtained by a colloidal processing route
214
Creep behaviour of alumina–mullite–zirconia nanocomposites obtained by a colloidal processing route
215
Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites
216
Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites
217
Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites
218
Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates — DS Al–SiC/Al4C3 composites
219
Creep behaviour of an Al–8.5Fe–1.3V–1.7Si–15SiCp composite at temperatures ranging from 873 to 948 K
220
Creep behaviour of an Al–8.5Fe–1.3V–1.7Si–15SiCp composite at temperatures ranging from 873 to 948 K
221
Creep behaviour of an oxide dispersion strengthened Al–5Mg alloy reinforced by silicon carbide particulates — an oxide dispersion strengthened Al–5Mg–30SiCp composite
222
Creep behaviour of an oxide dispersion strengthened Al–5Mg alloy reinforced by silicon carbide particulates — an oxide dispersion strengthened Al–5Mg–30SiCp composite
223
Creep behaviour of as received, aged and cold worked INCONEL 617 at 850 °C and 950 °C
224
Creep behaviour of bamboo
225
Creep behaviour of CFRP-strengthened reinforced concrete beams
226
Creep behaviour of Fe3Al-based alloys in DO3 phase field
227
Creep behaviour of Fe–Mn–Al steel from 500 to 800 °C: Part 1: Analysis of constant-load creep data
228
Creep behaviour of Fe–Mn–Al steel from 500 °C to 800 °C: Part 2: Aspects of rupture strength and parametric analysis
229
Creep Behaviour of Fly Ash-Based Geopolymer Concrete
230
Creep behaviour of FRP-reinforced polymer concrete
231
CREEP BEHAVIOUR OF FULL SIZE WELDED JOINTS: DESIGN IMPROVEMENTS
232
CREEP BEHAVIOUR OF FULL-SIZE WELDED JOINTS: DEFECT ACCEPTANCE CRITERIA
233
Creep behaviour of icosahedral Al–Cu–Fe
234
Creep behaviour of icosahedral Al–Cu–Fe
235
Creep behaviour of iron–aluminium–chromium intermetallics strengthened by nano-sized oxide particles
236
Creep behaviour of layered silicate/starch–polycaprolactone blends nanocomposites
237
Creep behaviour of leaded brass
238
Creep behaviour of leaded brass
239
Creep behaviour of membrane and substrate materials for oxygen separation units
240
Creep behaviour of Mg–8% Sn and Mg–8% Sn–3% Al–1% Si alloys
241
Creep behaviour of modified 9Cr–1Mo ferritic steel
242
Creep behaviour of MoSi2–HfO2 composites
243
Creep behaviour of natural rock salt and its description with the composite model
244
Creep behaviour of natural rock salt and its description with the composite model
245
Creep behaviour of near γ-TiAl base alloys: Effects of microstructure and alloy composition
246
Creep behaviour of near γ-TiAl base alloys: Effects of microstructure and alloy composition
247
Creep behaviour of Ni-base single-crystal superalloys with various γ′ volume fraction Original Research Article
248
Creep behaviour of ODS aluminium reinforced by silicon carbide particulates: ODS Al–30SiCp composite
249
Creep behaviour of ODS aluminium reinforced by silicon carbide particulates: ODS Al–30SiCp composite
250
Creep behaviour of ODS steels
251
Creep behaviour of ODS steels
252
Creep behaviour of porous metal supports for solid oxide fuel cells
253
Creep behaviour of porous SOFC electrodes: Measurement and application to Ni-8YSZ cermets
254
Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1 alloy
255
Creep behaviour of the ZM21 wrought magnesium alloy
256
Creep behaviour of Ti3Al-based titanium aluminide alloys containing molybdenum
257
Creep behaviour of Ti3Al-based titanium aluminide alloys containing molybdenum
258
Creep behaviour of Ti-6Al-2Sn-4Zr-2Mo: II. Mechanisms of deformation Original Research Article
259
Creep behaviour of tubular Ba0.5Sr0.5Co0.8Fe0.2O3−δ gas separation membranes
260
Creep behaviour of two sintered silicon nitride ceramics
261
Creep behaviour of U–6%Zr alloy by impression creep technique
262
Creep behaviour of ultrafine-grained oxide dispersion strengthened copper prepared by cryomilling
263
Creep behaviour of ultrafine-grained oxide dispersion strengthened copper prepared by cryomilling
264
Creep behaviour of ultrafine-grained oxide dispersion strengthened copper prepared by cryomilling
265
Creep behaviour of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloy
266
Creep behaviour of δ-phase of U–Zr system by impression creep technique
267
Creep behaviour prediction and optimum design of plasma sprayed coatings with intermediate bonding layer
268
Creep bending of thin-walled shells and plates by consideration of finite deflections
269
Creep buckling and post-buckling analysis of the laminated piezoelectric viscoelastic functionally graded plates
270
Creep Buckling of Shallow Parabolic Concrete Arches
271
Creep cavitation in metals
272
Creep characteristics and internal stress in γ-TiAl
273
Creep characteristics and internal stress in γ-TiAl
274
Creep characteristics and microstructure in nano-particle strengthened AA6082
275
Creep characteristics in carbon free new martensitic alloys
276
Creep characteristics of asphalt modified by radial styrene–butadiene–styrene copolymer
277
Creep characteristics of porous Ni/Ni3Al anodes for molten carbonate fuel cells
278
Creep characterization and damage assessment of long term service exposed P-22 grade of steel
279
Creep characterization of a duplex Ti-Al base alloy at 700 and 750 °C
280
Creep characterization of a duplex Ti-Al base alloy at 700 and 750 °C
281
Creep characterization of a Ni-based Hastelloy-X alloy by using theta projection method
282
Creep compliance mapping by atomic force microscopy
283
Creep considerations for the lower head
284
Creep constitutive equation of dual phase 9Cr-ODS steel
285
Creep constitutive equations for cold-drawn 304L stainless steel
286
Creep constraint analysis and constraint parameter solutions for axial semi-elliptical surface cracks in pressurized pipes
287
Creep crack growth characteristics of polypropylene film at various temperatures
288
Creep crack growth in phosphorus alloyed oxygen free copper
289
CREEP CRACK GROWTH MICROMECHANISMS AT 405°C IN COLD BENT TUBES OF A C-Mn-Mo STEEL
290
Creep crack growth simulations in 316H stainless steel
291
Creep crack initiation and creep crack growth assessments in welded structures
292
Creep crack initiation and creep crack growth assessments in welded structures Original Research Article
293
Creep crack initiation at a free edge of an interface between submicron thick elements
294
Creep curve measurement to support wear and adhesion modelling, using a continuously variable creep twin disc machine
295
Creep damage and crack initiation behaviour of nickel-base single crystalline superalloys compact tension specimen with a void ahead of crack tip
296
Creep damage and long term life modelling of an X20 steam line component
297
Creep damage assessment for notched bar specimens of a low alloy steel considering stress multiaxiality
298
Creep damage characterization using a low amplitude nonlinear ultrasonic technique
299
Creep damage characterization using non-linear ultrasonic techniques Original Research Article
300
Creep damage evolution equations expressed in terms of dissipated power
301
Creep damage evolution equations expressed in terms of dissipated power
302
Creep damage evolution equations expressed in terms of dissipated power
303
Creep damage evolution in a modeling specimen of nickel-based single crystal superalloys air-cooled blades
304
Creep damage in different 3Al2O3·2SiO2 mullites tested in 4-point bending
305
Creep damage in SiC/SiC composites
306
Creep damage in SiC/SiC composites
307
Creep damage in welded joints of a Ni-base heat-resistant alloy Hastelloy XR
308
Creep damage in welded joints of a Ni-base heat-resistant alloy Hastelloy XR
309
Creep damage mechanism and γ′-phase morphology of a V-notched round bar in Ni-based single crystal superalloys
310
Creep damage mechanisms in polyethylene gas pipes
311
Creep damage modeling based on ultrasonic velocities in copper
312
Creep damage modelling for quasi-brittle materials
313
Creep damage resistance of ceramic–matrix composites
314
Creep damage study at powercycling of lead-free surface mount device
315
Creep deflection of viscoelastic laminated cylindrical panels with initial deflection under axial compression
316
Creep deformation and crack growth rates of a super α2 titanium aluminide alloy
317
Creep deformation and failure of E911/E911 and P92/P92 similar weld-joints
318
Creep deformation and mechanisms in Haynes 230 at 800 °C and 900 °C
319
Creep deformation and rafting in nickel-based superalloys simulated by the phase-field method using classical flow and creep theories Original Research Article
320
Creep deformation and rupture behaviour of 9Cr–1W–0.2V–0.06Ta Reduced Activation Ferritic–Martensitic steel
321
Creep deformation and rupture behaviour of directionally solidified GTD 111 superalloy
322
Creep deformation behavior and dislocation substructures of Mg–Y binary alloys
323
Creep deformation behavior and dislocation substructures of Mg–Y binary alloys
324
Creep deformation behavior of Sn–3.5Ag solder/Cu couple at small length scales Original Research Article
325
Creep deformation behavior of spherical Al2O3 particle-reinforced Al–Mg matrix composites at high temperatures Original Research Article
326
Creep deformation characteristics of discontinuously reinforced aluminium-matrix composites
327
Creep deformation in two-phase titanium aluminide alloys
328
Creep deformation in two-phase titanium aluminide alloys
329
Creep deformation mechanism of cryomilled NiCrAlY bond coat material
330
Creep deformation mechanism of magnesium-based alloys
331
Creep deformation mechanisms in fine-grained niobium Original Research Article
332
Creep deformation mechanisms in modified 9Cr–1Mo steel
333
Creep deformation modelling of superalloy single crystals Original Research Article
334
Creep deformation of a sixth generation Ni-base single crystal superalloy at 800 °C
335
Creep deformation of Alloys 617 and 276 at 750–950 °C
336
Creep deformation of austenitic steels at medium and low temperatures Original Research Article
337
Creep Deformation of Fiber Reinforced Plastics-Plated Reinforced Concrete Tensile Members
338
Creep deformation of iron strengthened by MX type particles
339
Creep deformation of Pb–Sn–Zn ternary alloys
340
Creep deformation of restorative resin-composites intended for bulk-fill placement
341
Creep deformation of single crystals of binary and some ternary MoSi2 with the C11b structure
342
Creep deformation of α2 Ti3Al intermetallics in the low stress region
343
Creep deformation of α2 Ti3Al intermetallics in the low stress region
344
Creep deformation related to dislocations cutting the γ′ phase of a Ni-base single crystal superalloy
345
Creep deformations and stresses in thick-walled cylindrical vessels of functionally graded materials subjected to internal pressure
346
Creep densification behavior of micro and nano metal powder: Grain size-dependent model Original Research Article
347
Creep ductility of 1Cr1Mo1/4V low alloy forging and casting steels
348
Creep effect on the behavior of concrete beams reinforced with GFRP bars subjected to different environments
349
Creep effects in activated sludge filter cakes
350
Creep effects in nanoindentation of hydrated phases of cement pastes
351
Creep effects on crack growth in a Mo–Si–B alloy Original Research Article
352
Creep elastic follow-up factors under multi-axial displacement-controlled loading
353
Creep elastic follow-up factors under multi-axial displacement-controlled loading
354
Creep Evolution Analysis of Composite Cylinder Made of Polypropylene Reinforced by Functionally Graded MWCNTs
355
Creep failure mechanisms of a Ti-6Al-4V thick plate
356
Creep failure model of a tempered martensitic stainless steel integrating multiple deformation and damage mechanisms
357
Creep failure of a spray drier
358
Creep failure of cracking heater at a petrochemical plant
359
Creep failure of low pressure turbine blade of an aircraft engine
360
Creep failure simulations of 316H at 550 °C: Part I – A method and validation
361
Creep failure simulations of 316H at 550 °C: Part II – Effects of specimen geometry and loading mode
362
Creep failure time prediction of polymers and polymer composites
363
Creep failures of overheated boiler, superheater and reformer tubes
364
Creep feed grinding of a gamma titanium aluminide intermetallic alloy using SiC abrasives
365
Creep feed profile grinding of Ni-based superalloys with ultrafine-polycrystalline cBN abrasive grits
366
Creep finite element simulation of multilayered system with interfacial cracks
367
Creep flow and pressure relaxation in bubbly medium
368
Creep flow, diffusion, and electromigration in small scale interconnects
369
Creep force characteristics between rail and wheel on scaled model
370
Creep forces in simulations of traction vehicles running on adhesion limit
371
Creep forming of high strength polyethylene fiber prepregs for the production of ballistic protection helmets
372
Creep fracture at interfaces of titanium nanocolumns on silicon substrate
373
Creep fracture of the centrifugally-cast superaustenitic steels, HK40 and HP40
374
Creep fracture of zirconium alloys
375
Creep fracture toughness using conventional and cell element approaches
376
Creep functions of dental ceramics measured in a beam-bending viscometer
377
Creep in commercially pure metals
378
Creep in commercially pure metals Original Research Article
379
Creep in concrete beams strengthened with composite materials
380
Creep in copper dispersion strengthened with alumina particles (ODS copper)
381
Creep in copper dispersion strengthened with alumina particles (ODS copper)
382
Creep in electrodeposited submicrocrystalline nickel and its particle-reinforced nanocomposite
383
Creep in ferroelectrics due to unipolar electrical loading
384
Creep in injection molded starch/synthetic polymer blends
385
Creep in injection molded starch/synthetic polymer blends
386
Creep in injection molded starch/synthetic polymer blends
387
Creep in mechanically alloyed NiAl
388
Creep in mechanically alloyed NiAl
389
Creep in nanocrystalline materials: Role of stress assisted grain growth
390
Creep in ODS copper reinforced with alumina short fibres—DRS copper
391
Creep in phosphorus alloyed copper during power-law breakdown
392
Creep in scandia stabilized zirconia
393
Creep in ultrafine grained aluminium
394
Creep in ultrafine grained aluminium
395
Creep in ultrafine grained aluminium
396
Creep in vacuum of woven Sylramic-iBN melt-infiltrated composites
397
Creep in α-Al2O3 thermally grown on β-NiAl and NiAlPt alloys
398
Creep influence on buckling resistance of reinforced concrete shells
399
Creep life assessment of a die-cast Mg–5Al–0.3Mn alloy
400
Creep Life Assessment of a Super-Heater Tube
401
Creep life assessment of distribution transformers
402
Creep Life Forecasting of Weldment
403
Creep life prediction of 9Cr–1Mo steel under multiaxial state of stress
404
Creep life prediction of a high strength steel plate
405
Creep life prediction of service-exposed turbine blades
406
Creep life prediction under stepwise constant uniaxial stress and temperature conditions
407
Creep mechanical behaviour of modified 9Cr1Mo steel weldments: Experimental analysis and modelling
408
Creep mechanism of highly purified V–4Cr–4Ti alloys during thermal creep in a vacuum
409
Creep mechanisms and physical modeling for Ti–6Al–4V
410
Creep mechanisms and physical modeling for Ti–6Al–4V
411
Creep mechanisms in an Mg–4Zn alloy in the as-cast and aged conditions
412
Creep mechanisms in particle strengthened α-Titanium–Ti2Co alloys
413
Creep mechanisms in particle strengthened α-Titanium–Ti2Co alloys
414
Creep mechanisms in quasi-plastic silicon nitride by instrumented indentation
415
Creep mechanisms in Ti–3Al–2.5V alloy tubing deformed under closed-end internal gas pressurization Original Research Article
416
Creep mechanisms of ferritic oxide dispersion strengthened alloys
417
Creep mechanisms of laminated alumina/zirconia-toughened alumina composites
418
Creep mechanisms of U720Li disc superalloy at intermediate temperature
419
Creep model for unsaturated soils in sliding zone of Qianjiangping landslide
420
Creep Modeling in Excavation Analysis of a High Rock Slope
421
Creep of a beta phase-containing TiAl alloy
422
Creep of a composite with a diffusional creeping matrix
423
Creep of a composite with a diffusional creeping matrix
424
Creep of a composite with a diffusional creeping matrix
425
Creep of a heat treated Mg–4Y–3RE alloy
426
Creep of a heat treated Mg–4Y–3RE alloy
427
Creep of a TiAl alloy: a comparison of indentation and tensile testing
428
Creep of Al–0.2Sc–0.04Zr alloys after different cold-rolling and ageing combinations
429
Creep of aluminium–magnesium open cell foam Original Research Article
430
Creep of aluminum syntactic foams
431
Creep of an Al2O3–SiC(whisker)–TiC(particle) composite1
432
Creep of an Al2O3–SiC(whisker)–TiC(particle) composite1
433
Creep of AZ31 Mg alloy: A comparison of impression and tensile behavior
434
Creep of cast Fe–36Al–2Ti alloy
435
Creep of CMSX-4 single crystals of different orientations in tension and compression
436
Creep of CMSX-4 single crystals of different orientations in tension and compression
437
Creep of concrete masonry walls strengthened with FRP composites
438
Creep of copper canisters in power-law breakdown
439
Creep of crystalline materials: experimental basis, mechanisms and models
440
Creep of crystalline materials: experimental basis, mechanisms and models
441
Creep of directionally solidified alumina/YAG eutectic monofilaments
442
Creep of epoxy–clay nanocomposite adhesive at the FRP interface: A multi-scale investigation
443
Creep of ex-service 0.5CrMoV steel at low strain rates
444
Creep of Fe–18Al–4Cr alloy with zirconium addition
445
Creep of FRP-wrapped concrete columns with or without fly ash under axial load
446
Creep of garnet in eclogite: Mechanisms and implications
447
Creep of glutaraldehyde-crosslinked gelatin films
448
Creep of heat treated silicon nitride with neodymium and yttrium oxides additions
449
Creep of Heat-Resistant Composites of an Oxide-Fiber/Ni-Matrix Family
450
Creep of hexagonal honeycombs with Plateau borders
451
Creep of high strength concrete filled steel tube columns
452
Creep of high-strength Mg-Ni-Y-RE alloys
453
Creep of lamellar TiAl alloys: degradation, stabilization and design of lamellar boundaries
454
Creep of lamellar TiAl alloys: degradation, stabilization and design of lamellar boundaries
455
Creep of lamellar TiAl alloys: degradation, stabilization and design of lamellar boundaries
456
Creep of magnesium strengthened with high volume fractions of yttria dispersoids
457
Creep of magnesium strengthened with high volume fractions of yttria dispersoids
458
Creep of metal-matrix composites with elastic fibers—Part I: Continuous aligned fibers
459
Creep of metal-matrix composites with elastic fibers—Part II: A damage model
460
Creep of monolithic and fibre-reinforced silicon carbide
461
Creep of nanocrystalline Cu, Pd, and Al-Zr
462
Creep of nanocrystalline Y-SZP ceramics
463
Creep of Nextel™720/alumina–mullite ceramic composite at 1200 °C in air, argon, and steam
464
Creep of open-cell Voronoi foams
465
Creep of open-cell Voronoi foams
466
Creep of open-cell Voronoi foams
467
Creep of phyllosilicates at the onset of plate tectonics
468
Creep of Poly(Vinyl Chloride)/ Chlorinated Polyethylene Blends
469
Creep of polycrystalline SrCo0.8Fe0.2O3−δ Original Research Article
470
Creep of polycrystalline yttrium aluminum garnet (YAG) at elevated temperature in air and in steam
471
Creep of Polymer Matrix Composites. I: Norton/Bailey Creep Law for Transverse Isotropy
472
Creep of Polymer Matrix Composites. II: Monkman-Grant Failure Relationship for Transverse Isotropy
473
Creep of PVDF monofilament sutures: service performance prediction from short-term tests
474
Creep of replicated microcellular aluminium Original Research Article
475
Creep of sandwich beams with metallic foam cores
476
Creep of sandwich beams with metallic foam cores
477
Creep of sandwich beams with metallic foam cores
478
Creep of silicon nitride
479
Creep of single crystalline and polycrystalline T2 phase in the Mo–Si–B system
480
Creep of the orthorhombic phase based on the intermetallic Ti2AlNb
481
Creep of thin film Au on bimaterial Au/Si microcantilevers Original Research Article
482
Creep of trabecular bone from the human proximal tibia
483
Creep of UHPC in tension and compression: Effect of thermal treatment
484
Creep of uncoated and Cu–Cr coated NARloy–Z
485
Creep of uncoated and Cu–Cr coated NARloy–Z
486
Creep of V–4Cr–4Ti in a lithium environment
487
Creep of Wood I-Joists Exposed to Abnormally High Moisture Conditions
488
Creep of Zr-doped alumina at very low creep rates
489
Creep plastic zone and crack initiation in double edge notched specimens of 304 stainless steel at 650 °C
490
Creep prediction of a layered fiberglass plastic
491
Creep prediction of concrete for reactor containment structures Original Research Article
492
Creep processes in pure aluminium processed by equal-channel angular pressing
493
Creep properties and effect factors of hot continuous rolled Ti–6Al–4V alloy
494
Creep properties and microstructures of helium implanted AISI 316L electron-beam weld and parent material
495
Creep properties and precipitate evolution in Al–Li alloys microalloyed with Sc and Yb
496
Creep properties beyond 1100 °C and microstructure of Co–Re–Cr alloys
497
Creep properties of a fully-lamellar Ti–48Al–2Cr–2Nb alloy
498
Creep properties of a fully-lamellar Ti–48Al–2Cr–2Nb alloy
499
Creep properties of a Mg–Al–Ca alloy produced by different casting technologies
500
Creep properties of a Pt–aluminide coating Original Research Article
501
Creep properties of a reduced activation 9Cr3WVTaB martensitic steel after helium implantation
502
Creep properties of a thermally grown alumina
503
Creep properties of aged duplex stainless steels containing σ phase
504
Creep properties of aged duplex stainless steels containing σ phase
505
Creep properties of Al3Sc and Al3(Sc, X) intermetallics Original Research Article
506
Creep properties of an Al-2024 composite reinforced with SiC particulates
507
Creep properties of an Al-2024 composite reinforced with SiC particulates
508
Creep properties of an extruded copper–8% chromium–4% niobium alloy
509
Creep properties of an extruded copper–8% chromium–4% niobium alloy
510
Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio
511
Creep properties of an oxide dispersion strengthened nickel-base alloy: the effect of grain orientation and grain aspect ratio
512
Creep properties of annealed Zr–Nb–O and stress-relieved Zr–Nb–Sn–Fe cladding tubes and their performance comparison
513
Creep properties of cement and asphalt mortar
514
Creep properties of different γ′-strengthened Co-base superalloys
515
Creep properties of low-temperature sintered nano-silver lap shear joints
516
Creep properties of service-exposed Alloy 625 after re-solution annealing treatment
517
Creep properties of service-exposed Alloy 625 after re-solution annealing treatment
518
Creep properties of V–4Cr–4Ti strengthened by cold working and aging
519
Creep Properties of Walikukun (Schouthenia ovata) Timber Beams
520
Creep property and microstructure evolution of a nickel-base single crystal superalloy in [011] orientation
521
Creep property comparisons for ceramic-fibre-reinforced ceramic–matrix composites
522
Creep property evaluation of a 2.25Cr–1Mo low alloy steel
523
Creep property measurements of welded joint of reduced-activation ferritic steel by the small-punch creep test
524
Creep rates and strengthening mechanisms in tungsten-strengthened 9Cr steels
525
Creep rates and strengthening mechanisms in tungsten-strengthened 9Cr steels
526
Creep resistance comparison of two solid oxygen fuel cell electrolytes with the fluorite structure: cubic zirconia and doped-ceria
527
Creep resistance of directionally solidified ceramic eutectics of Al203/c-Zr02 with sub-micron columnar morphologies
528
Creep resistance of directionally solidified ceramic eutectics of Al203/c-Zr02 with sub-micron columnar morphologies
529
Creep resistance of the directionally solidified ceramic eutectic of Al2O3/c-ZrO2(Y2O3): experiments and models
530
Creep resistant polymeric nanocomposites
531
Creep response and deformation processes in nanocluster-strengthened ferritic steels Original Research Article
532
Creep response of glued-laminated beam reinforced with pre-stressed sub-laminated composite
533
Creep response of thixotropic ambient temperature cure adhesives measured by DMTA in static tension and shear
534
Creep rupture analysis and remaining life assessment of 2.25Cr–1Mo steel tubes from a thermal power plant
535
Creep rupture and viscoelastoplasticity of polypropylene
536
Creep rupture behavior of 9Cr–1.8W–0.5Mo–VNb (ASME grade 92) ferritic steel weld joint
537
Creep rupture behavior of Grade 91 steel
538
Creep rupture behavior of semi-solid cast 7075-T6 Al alloy
539
Creep rupture behaviors of a laser melting deposited TiC/TA15 in situ titanium matrix composite
540
Creep rupture behaviour of P92 steel weldment
541
Creep rupture life and damage evaluation under multiaxial stress state for type 304 stainless steel
542
Creep rupture life and variation of micro-structure according to aging time and creep test methods
543
Creep rupture mechanisms of 5083-Al alloy under multiaxial stress states
544
Creep rupture of [90]8 Sigma fibre reinforced titanium matrix composite
545
Creep rupture of [90]8 Sigma fibre reinforced titanium matrix composite
546
Creep rupture of a 9Cr1MoNbV steel at 500 °C: Base metal and welded joint Original Research Article
547
Creep rupture of a GFRP composite at elevated temperatures
548
Creep rupture of copper and aluminium alloy under combined loadings—experiments and their various descriptions
549
Creep rupture of copper and aluminium alloy under combined loadings—experiments and their various descriptions
550
Creep rupture of copper and aluminium alloy under combined loadings—experiments and their various descriptions
551
Creep rupture of polymers-a statistical model
552
Creep rupture properties of die-cast Mg–Al–Ca alloys
553
Creep rupture properties of helium implanted V–4Cr–4Ti alloy NIFS-HEAT-2
554
Creep rupture properties of nitrogen added 10Cr ferritic/martensitic steels
555
Creep rupture property of in situ synthesized (TiB + La2O3)/Ti composite
556
Creep rupture strength of activated-TIG welded 316L(N) stainless steel
557
Creep rupture strength of heat affected zone for 9Cr ferritic heat resisting steels
558
Creep rupture strength of heat affected zone for 9Cr ferritic heat resisting steels Original Research Article
559
Creep sagging analysis of pressure pipes
560
Creep sagging analysis of pressure pipes II: Damage accumulation under variable temperature and pressure conditions
561
Creep simulation of 9–12% Cr steels using the composite model with thermodynamically calculated input
562
Creep simulation of 9–12% Cr steels using the composite model with thermodynamically calculated input
563
Creep simulation of asymmetric effects at large strains by stress mode decomposition Original Research Article
564
Creep simulation of asymmetric effects by use of stress mode dependent weighting functions
565
Creep small-punch testing and its numerical simulations
566
Creep Stability of Thin-Walled Composite Structures
567
Creep Strain and Permeability Evolution in Cracked Granite Subjected to Triaxial Stress and Reactive Flow
568
Creep Strain and Stress Analysis in Laminated Composite Pressure Vessels
569
Creep strain versus residual strain of a concrete loaded under various levels of compressive stress
570
Creep straining micro-mechanisms in a powder-metallurgical nickel-based superalloy
571
Creep straining micro-mechanisms in a powder-metallurgical nickel-based superalloy
572
Creep straining micro-mechanisms in a powder-metallurgical nickel-based superalloy
573
Creep strength degradation of ASME P23/T23 steels
574
Creep strength of a tungsten–rhenium–hafnium carbide alloy from 2200 to 2400 K
575
Creep strength of a tungsten–rhenium–hafnium carbide alloy from 2200 to 2400 K
576
Creep strength of centrifugally cast Al-rich TiAl alloys
577
Creep strength of nickel oxide/zirconia composites under different environmental atmospheres
578
Creep strength of reduced activation ferritic/martensitic steel Eurofer’97
579
Creep strength of Zircaloy-4 cladding depending on applied stress and annealing temperature
580
Creep strengthening of Ni3(Al, Si) intermetallic alloy by ductile precipitates
581
Creep Stress Redistribution Analysis of Thick-Walled FGM Spheres
582
Creep studies of AZ91D pressure die casting
583
Creep studies of AZ91D pressure die casting
584
Creep studies of coarse-grained AZ91D magnesium castings
585
Creep studies of coarse-grained AZ91D magnesium castings
586
Creep studies on U–7%Zr, U–7%Nb and U rich U–Nb–Zr alloys
587
Creep surge effect under cyclic irradiation of structural materials for fusion reactors
588
Creep tests on GFRP pultruded specimens subjected to traction or shear
589
Creep theory for transversely isotropic solids sustaining unilateral damage
590
Creep, creep-rupture tests of Al-surface-alloyed T91 steel in liquid lead bismuth at 500 and 550 °C
591
Creep, fatigue and oxidation in crack growth in advanced nickel base superalloys
592
Creep, plasticity, and fatigue of single crystal superalloy
593
Creep-based life prediction modelling of aluminium in fire
594
Creep-buckling of cellular solids Original Research Article
595
Creep-buckling of hexagonal honeycombs with dual imperfections
596
Creep-buckling of hexagonal honeycombs with plateau borders
597
Creep-buckling of open-cell foams Original Research Article
598
Creep-damage assessment of high chromium heat resistant steels and weldments
599
Creep-damaged pipe steels probed with positron spectroscopy
600
Creep-driven nitride scale growth in γ-TiAl Original Research Article
601
Creep–fatigue behavior at high temperature of a UDIMET 720 nickel-base superalloy
602
Creep-fatigue behaviour of CoCr22Ni22W14 in the temperature range 850 °C < T < 1200 °C
603
Creep-fatigue behaviour of CoCr22Ni22W14 in the temperature range 850 °C < T < 1200 °C
604
Creep–fatigue crack growth behaviour of a nickel-based powder metallurgy superalloy under high temperature
605
Creep-Fatigue Crack Growth Interaction in Nickel Base Supper Alloy
606
Creep–fatigue crack propagation in lead-free solder under cyclic loading with various waveforms
607
Creep-fatigue damage assessment by subsequent fatigue straining Original Research Article
608
Creep-fatigue damage evaluation of sodium to air heat exchanger in sodium test loop facility
609
Creep–fatigue damage for a structure with dissimilar metal welds of modified 9Cr–1Mo steel and 316L stainless steel
610
Creep-fatigue design evaluations including daily load following operations for the advanced burner test reactor Original Research Article
611
Creep-fatigue evaluation of stainless steel welded joints in FBR class 1 components
612
Creep–fatigue evaluation of stainless steel welded joints in FBR class 1 components Original Research Article
613
Creep-fatigue failure of an aero engine turbine blades
614
Creep–fatigue interaction and related structure property correlations of EUROFER97 steel at 550 °C by decoupling creep and fatigue load
615
Creep–fatigue interaction behaviour of a 15Cr–15Ni, Ti modified austenitic stainless steel as a function of Ti/C ratio and microstructure
616
Creep–fatigue interaction behaviour of a 15Cr–15Ni, Ti modified austenitic stainless steel as a function of Ti/C ratio and microstructure
617
Creep–fatigue interaction damage model and its application in modified 9Cr–1Mo steel
618
Creep–fatigue interaction of the ODS superalloy PM 1000
619
Creep–fatigue life of Sn–8Zn–3Bi solder under multiaxial loading
620
Creep-fatigue life prediction under fully-reversed multiaxial loading at high temperatures
621
Creep-fatiguebehaviourofanAISIstainlesssteelat550°COriginalResearchArticle
622
Creep-fatigue–environment interactions in INCONEL 617
623
Creep-fatigue–environment interactions in INCONEL 617
624
Creep–fatigue-oxidation interaction in Grade 91 steel weld joints for high temperature applications
625
Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part I: Effect of tensile holding period on fatigue lifetime
626
Creep-fatigue-oxidation interactions in a 9Cr–1Mo martensitic steel. Part II: Effect of compressive holding period on fatigue lifetime
627
Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part III: Lifetime prediction
628
Creeping along the Ismetpasa section of the North Anatolian fault (Western Turkey): Rate and extent from InSAR
629
Creeping analysis with variable temperature applying the boundary element method
630
Creeping attachment after free connective tissue graft for treatment of gingival recession
631
Creeping damage around an opening in rock-like material containing non-persistent joints
632
Creeping Environmental Problems and Sustainable Development in the Aral Sea Basin: edited by Glantz, M.H., Cambridge University Press, Cambridge, United Kingdom, 1999. Hardcover, XII+291 pp., Price £50.00., ISBN 0-521-62086-4
633
Creeping environmental problems and sustainable development in the Aral Sea Basin: edited by M.H. Glantz, Cambridge University Press, 1999, 291 pp.
634
Creeping Environmental Problems and Sustainable Development in The Aral Sea Basin: M.H. Glantz (Editor). Cambridge Univ. Press, Cambridge. 1999. Xii plus 291 pp., ISBN 0-521-62086-4, Hardcover GBP 50.00
635
Creeping flow of a polymeric liquid passing over a transverse slot with viscous dissipation
636
Creeping flow of generalized Newtonian fluid through a fixed and a fluidized bed of spherical particles
637
Creeping flow of viscoelastic fluid through fixed beds of particles
638
Creeping flow of viscoplastic materials through a planar expansion followed by a contraction
639
Creeping flow past and within a permeable spheroid
640
Creeping flow through ordered arrays of micro-cylinders embedded in a rectangular minichannel
641
Creeping instability in YBCO ceramics under non-isothermal superconducting transition
642
Creeping motion of a slip spherical particle in a circular cylindrical pore
643
Creeping motions of a porous spherical shell in a concentric spherical cavity
644
Creep-resistant behavior of MWCNT-polycarbonate melt spun nanocomposite fibers at elevated temperature
645
Creep-resistant behavior of self-reinforcing liquid crystalline epoxy resins
646
Creep-resistant elastomeric networks prepared by photocrosslinking fumaric acid monoethyl ester-functionalized poly(trimethylene carbonate) oligomers
647
Creep-resistant magnesium alloys
648
Creep-resistant magnesium alloys
649
Creep-rupture lifetime simulation of unidirectional metal matrix composites with and without time-dependent fiber breakage
650
Creep-rupture prediction for steels and alloys by parametric methods and the base diagram method. Part 1. Interpolation analysis of experimental data
651
Creep-rupture prediction for steels and alloys by parametric methods and the base diagram method. Part 2. Extrapolation analysis of experimental data
652
Creep-rupturing of cellular materials: Regular hexagonal honeycombs with dual imperfections
653
Creep-rupturing of elliptical and circular cell honeycombs
654
Creep-rupturing of open-cell foams Original Research Article
655
Creep-to-rupture of 9%Cr steel T91 in air and oxygen-controlled lead at 650 °C
656
Creep-to-rupture of the steel P92 at 650 °C in oxygen-controlled stagnant lead in comparison to air
657
Creep-to-rupture tests of T91 steel in flowing Pb–Bi eutectic melt at 550 °C
658
cRel induces mitochondrial alterations in correlation with proliferation arrest
659
Cre–lox recombination: Cre-ative tools for plant biotechnology
660
CREM deficiency in mice alters the response of bone to intermittent parathyroid hormone treatment
661
cremona Italian scientist investigated after animal cloning experiment
662
Cremona transformations and some related algebras
663
Cremona transformations and the conundrum of dimensionality and signature of macro-spacetime
664
Cremonian space–time(s) as an emergent phenomenon
665
Crenate broomrape (Orobanche crenata) infection in field pea cultivars
666
Crenulated seafloor: Evidence for spreading-rate dependent structure of mantle upwelling and melting beneath a mid-oceanic spreading center
667
Crenulation cleavage formation: Evolving diffusion, deformation and equilibration mechanisms with increasing metamorphic grade
668
Creodonts and carnivores from the Middle Miocene Muruyur Formation at Kipsaraman and Cheparawa, Baringo District, Kenya
669
Creole discourse effects on the speech conjunctive system in expository texts
670
CREOLE experiment study on the reactivity temperature coefficient with sensitivity and uncertainty analysis using the MCNP5 code and different neutron cross section evaluations
671
CREOLE: a Universal Language for Creating, Requesting, Updating and Deleting Resources
672
CreonʹS first TiO2 conference sheds light on the Russian market
673
CREPT Accelerates Tumorigenesis by Regulating the Transcription of Cell-Cycle-Related Genes
674
CREPT-MCNP code for efficiency calibration of HPGe detectors with the representative point method
675
Crescent and Electoral Strength: Islamic Party Portrait of Reform Era In Indonesia
676
Crescent pondʹʹs effect on some chemical properties of soil
677
Crescentic distal metatarsal osteotomy for the treatment of hallux valgus: a prospective, randomized, controlled study of two different fixation methods
678
Crescentic glomerulonephritis developing in the course of idiopathic membranoproliferative glomerulonephritis
679
Crescentic Glomerulonephritis in a Sub-Saharan Country: Clinical Presentation, Etiological and Evolutive Profile
680
Crescentic glomerulonephritis in non-asthmatic Churg-Strauss syndrome
681
Crescentic Glomerulonephritis, A Rare Presentation of Alport Syndrome
682
Crescentic Transformation in Primary Membranous Glomerulopathy: Association with Anti-GBM Antibody
683
Crescent-shaped morphotectonic features in the Gulf of Cadiz (offshore SW Iberia)
684
Cresol novolac–epoxy networks: properties and processability
685
Cresol Red Thallium Acetate Sucrose Inulin (CTSI) agar for the selective recovery of Carnobacterium spp.
686
Cresolase, catecholase and laccase activities in haemocytes of the red swamp crayfish
687
Cresol–formaldehyde based carbon aerogel as electrode material for electrochemical capacitor
688
Cress and Potato Soluble Epoxide Hydrolases: Purification, Biochemical Characterization, and Comparison to Mammalian Enzymes
689
Cressie and Read power-divergences as influence measures for logistic regression models
690
Cressie and Read power-divergences as influence measures for logistic regression models
691
CRESST direct Dark Matter search with cryogenic detectors
692
CRESST: First results with the phonon-light technique
693
CRESST: First results with the phonon-light technique
694
Cresst-II: dark matter search with scintillating absorbers
695
Cresst-II: dark matter search with scintillating absorbers
696
Cresswell, W., Lind, J., Kaby, U., Quinn, J. L. & Jakobsson, S. 2003. Does an opportunistic predator preferentially attack nonvigilant prey? Animal Behaviour, 66, 643–648
697
Crest lines for surface segmentation and flattening
698
Crestal unconformities on an exposed Jurassic tilted fault block, Wollaston Forland, East Greenland as an analogue for buried hydrocarbon traps
699
CRESTED PRODUCTS OF ASSOCIATION SCHEMES
700
Crested Saguaros: What is the Rhyme or Reason?
701
Cresyl diphenyl phosphate as flame retardant additive for lithium-ion batteries
702
Cretaceous — Eocene Volcanism Along Eastern Coast, India — Its Implications
703
Cretaceous (Wealden) climates: a modelling perspective
704
Cretaceous albitization and dequartzification of Hercynian peraluminous granite in the Salvezines Massif (French Pyrénées)
705
Cretaceous alkaline intra-plate magmatism in the Ecuadorian Oriente Basin: Geochemical, geochronological and tectonic evidence
706
Cretaceous alteration of Jurassic volcanic rocks, Pain Mesa, northern Victoria Land, Antarctica
707
Cretaceous and Cenozoic non-marine deposits of the Northern South Yellow Sea Basin, offshore western Korea: palynostratigraphy and palaeoenvironments
708
Cretaceous and early Tertiary climates of Antarctica: evidence from fossil wood
709
Cretaceous and tertiary inversion in the Bjørnøyrenna Fault Complex, south-western Barents Sea
710
Cretaceous angiosperm flowers: Innovation and evolution in plant reproduction
711
Cretaceous basaltic phreatomagmatic volcanism in West Texas: Maar complex at Peٌa Mountain, Big Bend National Park
712
Cretaceous Bivalves and Alcide d’Orbigny
713
Cretaceous bivalves from Ecuador and northern Peru
714
Cretaceous black shales in the Upper Magdalena Valley, Colombia. New organic geochemical results (part II)
715
Cretaceous calcareous nannofossils from Pelotas Basin, Brazil: Biostratigraphic and paleoecological inferences
716
CRETACEOUS CARBONATES IN THE ADIYAMAN REGION, SE TURKEY: AN ASSESSMENT OF BURIAL HISTORY AND SOURCE-ROCK POTENTIAL
717
Cretaceous climate oscillations in the southern palaeolatitudes: New stable isotope evidence from India and Madagascar
718
Cretaceous climate, volcanism, impacts, and biotic effects
719
Cretaceous Collembola (Arthropoda, Hexapoda) from the Upper Cretaceous of Canada
720
Cretaceous conchostracans from Potiguar Basin (northeast Brazil): relationships with West African conchostracan faunas and palaeoecological inferences
721
Cretaceous conifers and angiosperms from the Bonarelli Level; Reassessment of Massalongoʹs plant fossil collections of “Monte Colle”, Lessini Mountains, northern Italy
722
Cretaceous epithermal gold–silver mineralization and geodynamic environment, Korea
723
Cretaceous eustasy revisited
724
Cretaceous evolution in the Norwegian Sea—a period characterized by tectonic quiescence
725
Cretaceous extension of the Ganhang Tectonic Belt, southeastern China: constraints from geochemistry of volcanic rocks
726
Cretaceous fluvial strata in the Moose River Basin of Ontario, Canada, as a source of kaolin for paper and ceramic industries
727
Cretaceous foraminifera from the Turonian succession at Beer, southeastern Devon, England
728
Cretaceous Gross Spitzkoppe and Klein Spitzkoppe stocks in Namibia: Topaz-bearing A-type granites related to continental rifting and mantle plume
729
Cretaceous isochron ages from K–Ar and 40Ar / 39Ar dating of eclogitic rocks in the Tso Morari Complex, western Himalaya, India
730
Cretaceous length of day perturbation by mantle avalanche
731
Cretaceous marine reptiles of Australia: a review of taxonomy and distribution
732
Cretaceous methane-seep deposits from New Zealand and their fauna
733
Cretaceous oceanic anoxic events and radially elongated chambered planktonic foraminifera: Paleoecological and paleoceanographic implications
734
Cretaceous oceanic red beds (CORBs): Different time scales and models of origin
735
Cretaceous oceanic red beds and land–ocean interaction
736
Cretaceous palaeogeography of southern Gondwana from the distribution of the marine ostracod Majungaella Grekoff: New data and review
737
Cretaceous palaeogeography of the North-Eastern Peri-Tethys
738
Cretaceous paleogeography and paleoclimate and the setting of SKI borehole sites in Songliao Basin, northeast China
739
Cretaceous paleomagnetic apparent polar wander path for the Pacific plate calculated from Deep Sea Drilling Project and Ocean Drilling Program basalt cores
740
Cretaceous paleomagnetism of the eastern South China Block: establishment of the stable body of SCB
741
Cretaceous pCO2 estimation from stomatal frequency analysis of gymnosperm leaves of Patagonia, Argentina
742
Cretaceous Pelagic Red Beds and Black Shales (Aptian-Santonian), NW Turkey: Global Oceanic Anoxic and Oxic Events
743
Cretaceous Phytogeoprovinces and Paleoclimates in East Coast Basins of India
744
Cretaceous potassic intrusives with affinities to aillikites from Jharia area: Magmatic expression of metasomatically veined and thinned lithospheric mantle beneath Singhbhum Craton, Eastern India
745
Cretaceous reconstructions of East Antarctica, Africa and Madagascar
746
Cretaceous reconstructions of East Antarctica, Africa and Madagascar
747
Cretaceous rift related magmatism in central-western South America
748
Cretaceous separation of Africa and South America: the view from the West African margin (ODP Leg 159)
749
CRETACEOUS SOURCE ROCKS AT THE ABU GHARADIG OIL- AND GASFIELD, NORTHERN WESTERN DESERT, EGYPT
750
CRETACEOUS SOURCE ROCKS AT THE ABU GHARADIG OIL- AND GASFIELD, NORTHERN WESTERN DESERT, EGYPT
751
Cretaceous stratigraphy of northeast China: non-marine and marine correlation
752
Cretaceous Stratigraphy-An Update
753
Cretaceous tectonic evolution of South China: A preliminary synthesis
754
Cretaceous terrestrial beds from the Neuquén Basin (Argentina) and their tetrapod assemblages
755
Cretaceous terrestrial biotas of East Asia, with special reference to dinosaur-dominated ichnofaunas: towards a synthesis
756
Cretaceous tetrapod fossil record sampling and faunal turnover: Implications for biogeography and the rise of modern clades
757
Cretaceous thermo-chemical modification of the Kaapvaal cratonic lithosphere, South Africa
758
Cretaceous to Eocene evolution of the southeastern Canadian Cordillera: Continuity of Rocky Mountain thrust systems with zones of “in-sequence” mid-crustal flow
759
CRETACEOUS TO MIOCENE PALAEOGEOGRAPHIC EVOLUTION OF TURKEY: IMPLICATIONS FOR HYDROCARBON POTENTIAL
760
Cretaceous to Paleocene depositional history of North-Pacific subduction zone: reconstruction from the Nemuro Group, eastern Hokkaido, northern Japan
761
Cretaceous transformation from passive to active continental margin in the Western Carpathians as indicated by the sedimentary record in the Infratatric unit
762
Cretaceous volcanic rocks of the South Tethyan suture zone, Pakistan: implications for the Réunion hotspot and Deccan Traps
763
Cretaceous wildfires and their impact on the Earth system
764
Cretaceous/Paleogene boundary bathyal paleo-environments in the central North Pacific (DSDP Site 465), the Northwestern Atlantic (ODP Site 1049), the Gulf of Mexico and the Tethys: The benthic foraminiferal record
765
Cretaceous–Paleogene basaltic rocks of the Tuyon basin, NW China and the Kyrgyz Tian Shan: the trace of a small plume
766
Cretaceous–Paleogene boundary events
767
Cretaceous–Paleogene boundary exposed: Campeche Escarpment, Gulf of Mexico
768
Cretaceous-Paleogene transition at the Paraيba Basin, Northeastern, Brazil: Carbon-isotope and mercury subsurface stratigraphies
769
Cretaceous–Tertiary boundary ostracodes from the Poty quarry, Pernambuco, northeastern Brazil
770
Cretaceous–Tertiary boundary problem on shallow carbonate platform: Carbon and oxygen excursions, biota and microfacies at the K/T boundary sections Dolenja Vas and Sopada in SW Slovenia, Adria CP
771
Cretaceous-Tertiary Foraminifera and Palynomorphs from Djega Section and Inferred Paleodepositional Environments, Rio Del Rey Basin, Cameroon, West Africa
772
Cretaceous–Tertiary inversion history of the Dampier Sub-basin, northwest Australia: Insights from quantitative basin modelling
773
Cretaceous–Tertiary structures and kinematics of the Serbomacedonian metamorphic rocks and their relation to the exhumation of the Hellenic hinterland (Macedonia, Greece)
774
Cretaceous-Tertiary tectonic inversion of the Cotiella Basin (southern Pyrenees, Spain)
775
Creutzfeldt-Jacob Disease in an Iranian Patient Confirmed By Brain Autopsy
776
Creutzfeldt-Jacob disease: a case report.
777
Creutzfeldt-Jak ob disease in French West Indies
778
Creutzfeldt-Jakob disease
779
Creutzfeldt-Jakob disease
780
Creutzfeldt-Jakob disease
781
Creutzfeldt-Jakob Disease after Dental Procedure along with the Initial Manifestations of Psychiatric Disorder: A Case Report
782
Creutzfeldt-Jakob Disease and eating squirrel brains
783
Creutzfeldt-Jakob disease and non-convulsive status epilepticus: a clinical and electroencephalographic follow-up study
784
Creutzfeldt-Jakob disease in a 52-year-old woman with florid plaques
785
Creutzfeldt-Jakob disease in a beef farmer
786
Creutzfeldt-Jakob disease in a dairy farmer
787
Creutzfeldt-Jakob disease in Europe
788
Creutzfeldt-Jakob Disease Operating Room Protocols: Turning Published Recommendations into Reality
789
Creutzfeldt-Jakob Disease Presenting with Confusion and Visual Disturbance
790
Creutzfeldt-Jakob disease with florid plaques after cadaveric dural graft in a Japanese woman
791
Creutzfeldt-Jakob disease: A case report
792
Creutzfeldt-Jakob Disease: A Systems Approach in a Community Acute-Care Teaching Hospital
793
Creutzfelt–Jakob disease presenting hyperparathyroidism
794
Crevassing and capture by floodplain drains as a cause of partial avulsion and anastomosis (lower Rio Pastaza, Peru)
795
Crevice corrosion behavior of high-alloy stainless steelsin a SWRO pilot plant Original Research Article
796
Crevice corrosion of 316l caused by chloride partition in water-butanone mixtures
797
Crevice corrosion of copper alloys by optical interferometry
798
Crevice Corrosion of K60 in Dry Desertification Saline Soil Original Research Article
799
Crevice-type caves as initial forms of rock landslide development in the Flysch Carpathians
800
Crevicular and serum levels of monocyte chemoattractant protein-4 and high-sensitivity C-reactive protein in periodontal health and disease
801
Crevicular fluid levels of plasma glutathione peroxidase (eGPx) in periodontal health and disease
802
Crevicular fluid levels of TGFβ1 in drug-induced gingival overgrowth
803
Crew pairing at Air France
804
Crew Resource Management training for offshore oil production teams
805
Crew resource management: The relationships between personality types and crew resource management attitudes of pilots
806
Crew scheduling of light rail transit in Hong Kong: from modeling to implementation
807
Crew study of seafarers: a methodological approach to the global labour market for seafarers
808
Crewmanʹs associate (CA) cognitive decision aiding (CDA) applications for the U.S. Armyʹs future main battle tanks
809
CREWS-SAVRE: Scenarios for Acquiring and Validating Requirements
810
Crex et analyse Orion en radiothérapie : vers une mutualisation des actions correctives
811
CRF Ligands via suzuki and negishi couplings of 3-pyridyl boronic acids or halides with 2-benzyloxy-4-chloro-3-nitropyridine
812
CRF1 Not Glucocorticoid Receptors Mediate Prepulse Inhibition Deficits in Mice Overexpressing CRF
813
CRFA-CRBM: a hybrid technique for anomaly recognition in regional geochemical exploration; case study: Dehsalm area, east of Iran
814
CRF-Based Model for Instrument Detection and Pose Estimation in Retinal Microsurgery
815
Cr-Fe-S (Chromium-Iron-Sulfur)
816
CRFP contribution to shear capacity of strengthened RC beams
817
Cr-free Fe-based metal oxide catalysts for high temperature water gas shift reaction of fuel processor using LPG
818
CRH challenge test in anxious depression
819
CRH-induced Electrical Activity and Calcium Signalling in Pituitary Corticotrophs
820
CRH-like peptides protect cardiac myocytes from lethal ischaemic injury
821
CRHR1 Receptor binding and lipophilicity of pyrrolopyrimidines, potential nonpeptide corticotropin-releasing hormone type 1 receptor antagonists Original Research Article
822
Cri du Chat Syndrome: a Case Report with Recurrent Pneumonia and Chronic Stridor
823
Cri du Chat Syndrome: a Case Report with Recurrent Pneumonia and Chronic Stridor
824
Cria alpaca body weight and perinatal survival in relation to age of the dam
825
CRIB and impairment after neonatal intensive care
826
Crib death. Sudden Unexplained Death of Infants: the pathologistʹs viewpoint, G Ottaviani. Springer, Milano (2007)
827
Crib death: further support for the concept of fatal cardiac electrical instability as the final common pathway
828
CRIB II: an update of the clinical risk index for babies score
829
Cribiform-morular variant of papillary thyroid carcinoma and familial adenomatous polyposis: report of a case and literature review
830
Cribrarione A, a new antimicrobial naphthoquinone pigment from a myxomycete Cribraria purpurea
831
Cribriform Atrial Septal Aneurysm
832
Cribriform-Morular Variant of a Papillary Carcinoma: A Case Report
833
Cricetodontini from the Calatayud–Daroca Basin (Spain): A taxonomical description and update of their stratigraphical distributions
834
C-rich sandy Ap horizons of specific historical land-use contain large fractions of refractory organic matter
835
C-rich sandy Ap horizons of specific historical land-use contain large fractions of refractory organic matter
836
Crick’s Notion of Genetic Information and the ‘Central Dogma’ of Molecular Biology
837
Cricket at the speed of light
838
Cricket at the speed of light
839
Cricket at the speed of light
840
Crickets groom to avoid lethal parasitoids
841
Crickets in space: morphological, physiological and behavioral alterations induced by space flight and hypergravity Original Research Article
842
Cricoid Pressure for the Medical Student
843
Cricoid Pressure in Emergency Department Rapid Sequence Tracheal Intubations: A Risk-Benefit Analysis
844
Cricoid ring integrity: Implications for cricothyrotomy
845
Criconematidae (Nematoda: Tylenchida) from the New Zealand region: genera Ogma Southern, 1914 and Blandicephalanema Mehta & Raski, 1971
846
Cricopharyngeal sphincter muscle responses to transcranial magnetic stimulation in normal subjects and in patients with dysphagia
847
Cricothyroid activity in high and low vowels: exploring the automaticity of intrinsic F0
848
CRICOTHYROID APPROXIMATION USING A SILASTIC SHEATH: A NEW APPROACH
849
Cricothyroid Joint Abnormalities in Patients With Rheumatoid Arthritis
850
Crigler-Najjar syndrome type II in a caucasian patient resulting from two mutations in the bilirubin uridine 5′-diphosphate-glucuronosyltransferase (UGT1A1) gene
851
CrIII(salen) catalysed asymmetric ring opening of monocyclic terpene-epoxides
852
CrIII(salen) impregnated on silica for asymmetric ring opening reactions and its recovery via desorption/re-impregnation
853
CrIII(salen)Cl Catalyzed Asymmetric Epoxidations: Insight into the Catalytic Cycle
854
CRIM: Conditional Remapping to Improve the Reliability of Solid-State Drives with Minimizing Lifetime Loss
855
Crim1 inhibits angiotensin II-induced hypertrophy and preserves Kv4.2 expression in cardiomyocytes
856
Crime and criminal justice in modern Japan: From re-integrative shaming to popular punitivism
857
Crime and ethics
858
Crime and Housing in Malaysia: Case Study of Taman Melati Terrace Housing in Kuala Lumpur
859
Crime and Its Social Context: Towards an Integrated Theory of Offenders, Victims and Situations
860
Crime and its solutions in Barbados
861
Crime and law enforcement in the global village : Edited by William F. McDonald Academy of Criminal Justice Sciences/Anderson Publishing Co. (P.O. Box 1576, Cincinnati, Ohio 45201-1576), 1997, 245 pp., softcover—$23.95
862
Crime and local inequality in South Africa
863
Crime and Malaysia’s development agenda: An overview
864
Crime and mental disorders among native Dutch and ethnic minority juvenile defendants in the Netherlands
865
Crime and modernity: continuities in left realist criminology: John Lea; Sage, London, 2002, pp. 224, price £60 hardback, £17.99 paperback The culture of control: crime and social order in contemporary society David Garland; Oxford University Press, Oxfor
866
Crime and morality: the significance of criminal justice in post – 2 modern culture: Hans Boutellier; Kluwer Academic, Dordrecht, xii+181 pp., $115 hardback
867
Crime and offence prevention model in public institutions
868
Crime and Power: A History of Criminal Justice 1688–1998: Philip Rawlings; Addison, Wesley, Longman Ltd, England, 1999, 212 pages, softcover, ISBN 0582-30401-6.
869
Crime and punishment: Distinguishing the roles of causal and intentional analyses in moral judgment
870
Crime and punishment: Does it pay to punish?
871
Crime and Punishment: Inside Views: Edited by Robert Johnson & Hans Toch. Los Angeles: Roxbury, 2000. 245 pp., ISBN: 1-891487-16-7. $28.95 (paper).
872
Crime and religion: An international comparison among thirteen industrial nations
873
Crime and segregation
874
Crime and social interactions: a developing country case study
875
Crime and the city: Domestic burglary and the built environment in Tehran
876
Crime and the Timing of Work
877
Crime classification manual: A standard system for investigating and classifying violent crimes
878
Crime control and harassment of the innocent
879
Crime Hotspot detection using spatial Clustering: A literature review of related work
880
Crime in Italy at the time of the pandemic
881
Crime induced poverty traps
882
Crime Mapping and the Crimestat Program
883
Crime of Baby Dumping: A Review of Islamic, Malaysian and Nigerian Laws
884
crime of illegal fishing in indonesian exclusive economic zone in the perspective of economic crime
885
Crime of Rape in the Ottoman Law
886
CRIME OFFENDER WITH MENTAL RETARDATION: A CASE REPORT
887
Crime on campus: Legal issues and campus administration : by Michael Clay Smith & W. Richard Fossey. Phoenix, AZ: American Council on Education and The Oryx Press, 1995. 264p. $34.95. ISBN 0-89774-846-8
888
Crime prevention and the attitude toward the criminal justice system: The effects of a multimedia campaign
889
Crime Prevention in Scotland
890
Crime Rates and Criminal Justice Policies in the Advent of COVID-19 Pandemic: Some Criminological Issues
891
Crime reduction outcomes associated with the State Criminal Alien Assistance Program
892
Crime Scene Investigation Approach to Sudden Cardiac Death
893
CRIME SCENE INVESTIGATION THROUGH DNA TRACES USING BAYESIAN DEVICES1
894
Crime Scene Representation (2D, 3D, Stereoscop Projection) and Classification
895
Crime trends and the effect of mandated drug treatment: Evidence from Californiaʹs Substance Abuse and Crime Prevention Act
896
Crime victimization, alcohol consumption, and drug use in Canadian public housing
897
Crime victimization: its extent and communication
898
Crime, coordination, and punishment: An economic analysis
899
Crime, fraud and deceit on the internet: is there hyperreality in cyberspace?
900
Crime, neighborhood perceptions, and the underclass: The relationship between fear of crime and class position
901
Crime, Public Opinion, and Civil Liberties? The Tolerant Public: By Shmuel Lock. Published 1999 by Praeger Publishers. ISBN: 0-275-96432-9 (hardcover). 280 pp. Price $59.95
902
Crime, punishment, and background risks
903
Crime: social disorganization and relative deprivation
904
Crimean congo hemorrhagic fever appearance in the north of Iran
905
Crimean Congo hemorrhagic fever: a brief report regarding kidney involvement
906
Crimean Congo-Haemorrhagic Fever treated with oral ribavirin
907
Crimean-Congo haemorrhagic fever in Oman
908
Crimean-Congo haemorrhagic fever in Oman
909
Crimean-Congo Haemorrhagic Fever in Persian Traditional Medicine
910
Crimean-Congo Haemorrhagic Fever in Persian Traditional Medicine
911
Crimean–Congo haemorrhagic fever outbreak investigation in the Western Region of Afghanistan in 2008
912
Crimean-Congo haemorrhagic fever virus: sequence analysis of the small RNA segments from a collection of viruses world wide
913
Crimean-Congo Hemorrhagic Fever
914
Crimean-Congo Hemorrhagic Fever
915
Crimean-Congo Hemorrhagic Fever
916
Crimean-Congo Hemorrhagic Fever and Hypertention: A Case Report
917
Crimean-Congo hemorrhagic fever cases in the eastern BlackSea Region of Turkey: demographic, geographic, climatic,and clinical characteristics
918
Crimean-Congo hemorrhagic fever following consumption of uncooked liver: case series study
919
Crimean-Congo Hemorrhagic Fever in Dubai, United Arab Emirates, 2010: Case Report
920
Crimean-Congo Hemorrhagic Fever in the One-Humped Camel (Camelus dromedarius) in East and Northeast of Iran
921
Crimean-Congo Hemorrhagic Fever Virus Gn Bioinformatic Analysis and Construction of a Recombinant Bacmid in Order to Express Gn by Baculovirus Expression System
922
Crimean-Congo hemorrhagic fever, transfer patterns, vectors and history in Iran and neighboring countries
923
Crimean-Congo Hemorrhagic Fever: A Reemerging Disease
924
CRIMEAN-CONGO HEMORRHAGIC FEVER: AN EMERGING DILEMMA IN PAKISTAN
925
Crimean-congo hemorrhagic fever: treatment and control strategy in admitted patients
926
Crimean-Congo Hemorrhagic Fever-Treatment and Preventive Strategies
927
Crimean-Congo Hemorrhagic Fever-Treatment and Preventive Strategies
928
Crime-minimizing drug policy
929
Crime-Related Trauma: Psychological Distress in Victims of Bankrobbery
930
Crimes Against Humanity and Genocide : The Plight of Rohingya Muslims and Iran s Stance
931
Crimes analysis software: ‘pins in maps’, clustering and Bayes net prediction
932
Crimes and misdemeanours: the death of Arthur Andersen
933
Crimes and the Bell curve: The role of people with high, average, and low intelligence
934
Crimes in the Straits Settlements before World War II
935
Crimes of the Big Four motorcycle gangs
936
CrimeSPOT: A language and runtime for developing active wireless sensor network applications
937
Criminal ‘organisations’ in Greece and public policy: from non-real to hyper-real?
938
criminal accountability of government officials based on discretion authorities in the perspective of the indonesian welfare law state
939
CRIMINAL ACHIEVEMENT, OFFENDER NETWORKS AND THE BENEFITS OF LOW SELF-CONTROL
940
Criminal Activity and Assault-Type Handguns: A Study of Young Adults, , ,
941
Criminal and alcohol problems among Swedish drunk drivers — Predictors of DUI relapse
942
Criminal behavior in general equilibrium: Who benefits from crime?
943
Criminal behaviour and violent crimes in former inpatients with affective disorder
944
Criminal Behaviour Associated with a Novel Mutation inthe VPS13A-Gene Causing Chorea-Acanthocytosis
945
Criminal career progression among serious youthful offenders in Australia
946
Criminal charges against Bosnian Serb doctors
947
Criminal consequences of commotio cordis
948
Criminal consequences of commotio cordis
949
criminal consequences of commotio cordis: Reply
950
Criminal deterrence as a public health strategy
951
Criminal epidemiology and the immigrant paradox: Intergenerational discontinuity in violence and antisocial behavior among immigrants
952
criminal execution of special minimum amercement sanctions in law of the republic of indonesia number 35 of 2009 concerning narcotics (case in jurisdiction of the dharmasraya state prosecutor s office jurisdiction)
953
Criminal Identification And Comprehensive Analysis Using Deep Learning: A Review
954
Criminal incident prediction using a point-pattern-based density model
955
Criminal insanity in 19th-century Ireland, Europe and the United States: Cases, contexts and controversies
956
Criminal investigation of child sexual abuse: a comparison of cases referred to the prosecutor to those not referred
957
Criminal justice and ethical ideology: an exploration of a loyalty-truthfulness dilemma
958
Criminal justice in the Middle East
959
Criminal justice institutions as a common pool: the 19th century analysis of Edwin Chadwick
960
Criminal justice involvement and service need among men on methadone who have perpetrated intimate partner violence
961
Criminal justice outcomes of prosecution of child sexual abuse: A case flow analysis,
962
Criminal justice pioneers: A content analysis of biographical data
963
Criminal Justice System in Brazil: Functions of a forensic psychiatrist
964
Criminal justice: Portrait of a discipline in process
965
Criminal Law and Tax Compliance in Argentina: Testing the Limits of Deterrence
966
Criminal Law of Women in Qajar Era Namely in Naser-ad-Din Shah Era (1264-1313)
967
Criminal Liability Arising From Medical Staff’s Negligence in Abortion
968
Criminal Liability for Breach of Fiduciary Duty: A Case of Criminal Breach of Trust by the Personal Representative of the Deceased’s Estate
969
criminal liability in the land procurement corruption iain imam bonjol padang year 2010 (study of decision no. 26 / pid.sus / tpk / 2016 / pn / pdg)
970
Criminal Lunacy in Early Modern England: Did Gender Make a Difference?
971
Criminal Minds
972
Criminal Offenses Among Discharged Mentally Ill Individuals: Determinants of the Duration from Discharge and Absence of Diagnostic Specificity
973
criminal poisoning: a hospital-based survey in an academic center of iran
974
Criminal prosecution of child sexual abuse cases
975
CRIMINAL PROSECUTION OF DOCTORS IN INDONESIA: ISSUES AND PROBLEMS
976
Criminal Responsibility of Village Chief in Approving Indigenous Inheritance Necessity Certificate
977
Criminal responsibility, “fleeting” states of mental impairment, and the power of self-control
978
Criminal science in a global society: Essays in honor of Gerhard O. W. Mueller : Edited by Edward M. Wise Fred B. Rothman & Co. (10368 West Centennial Road, Littleton, Colorado 80127), 1994, 288 pp., hardcover — $57.50
979
Criminal Sociology of Prison Population with Emphasis on Iran's Penal policy Evaluation
980
Criminal solicitation, entrapment, and the enforcement of law
981
Criminal Victimization and the Reporting of Crime in Kaduna State: Towards Integrating the Victim of Crime into Criminological Discourse
982
Criminal victimization in South Korea: A multilevel approach
983
Criminal victimization in the developing world : Edited by Ugljesa Zvekic and Anna Alvazzi Del Frate United Nations Interregional Crime and Justice Research Institute (via Giulia 52, 00186 Rome, Italy), 1995, 434 pp., softcover — $40.00
984
Criminalisation of Misappropriation of Traditional Cultural Expression TCE
985
Criminality and violence among the mentally disordered: the Stockholm Metropolitan project: Sheilagh Hodgins and Carl-Gunnar Janson; Cambridge University Press, Cambridge, 2002, pp. 228, Price £40.00
986
Criminality in the offspring of antenatally depressed mothers: a 33-year follow-up of the Northern Finland 1966 Birth Cohort
987
Criminality of the mentally ill in sheltered care : Are they more dangerous?
988
criminalizing female genital mutilation in some islamic countries including iran
989
CRIMINOLOGICAL KNOWLEDGE: PERIOD AND COHORT EFFECTS IN SCHOLARSHIP
990
Criminological scholarship and race: A rejoinder from Professors Ross and Edwards
991
Criminological scholarship and race: A response to Professors Ross and Edwards
992
Criminological Study of Personality-Based Crimes in Cyberspace; from Typology to Policy Strategies
993
Criminological theory in the digital age: The case of social learning theory and digital piracy
994
Criminology and justice : by Lydia Voigt, William E. Thornton, Jr., Leo Barrile, and Jerrol M. Seaman McGraw-Hill (Princeton Road, Hightstown, New Jersey 08520), 1994, 692 pp., hardcover — $44.00
995
Criminology: Explaining crime and its context, second edition : Edited by Stephen E. Brown, Finn-Aage Esbensen, and Gilbert Geis Anderson Publishing Company (P.O. Box 1576, Cincinnati, Ohio 45201-1576), 1995, 560 pp., softcover — $39.95
996
Crimmins, Gonzales and Moore
997
Crimped polymer nanofibres by air-driven electrospinning
998
Crinatusins, Bioactive Diels–Alder Adducts from Cyathocalyx crinatus
999
Cr-Inclination Theorems for Singularly Perturbed Equations
1000
Crinoid biofacies in Upper Carboniferous cyclothems, midcontinent North America: faunal tracking and the role of regional processes in biofacies recurrence