Title List مقالات لاتين Microstructure development, mechanical properties and formability of Mg–Zn–Y–Zr magnesium alloy Microstructure, tensile deformation mode and crevice corrosion resistance in Ti–10Mo–xFe alloys

بر اساس عنوان

1

Microstructure development, mechanical properties and formability of Mg–Zn–Y–Zr magnesium alloy

2

Microstructure devices for process intensification: Influence of manufacturing tolerances and design

3

Microstructure devices for water evaporation

4

Microstructure difference between core and skin of T700 carbon fibers in heat-treated carbon/carbon composites Original Research Article

5

Microstructure Diffusion Models with Secondary Flux

6

Microstructure distribution and mechanical properties prediction of boron alloy during hot forming using FE simulation

7

Microstructure effect of carbon nanofiber on electrocatalytic oxygen reduction reaction

8

Microstructure effect of carbon nanofibers on Pt/CNFs electrocatalyst for oxygen reduction

9

Microstructure effect on hydrogen-induced cracking in TM210 maraging steel

10

Microstructure effect on microtopography of chemically etched a + b Ti alloys

11

Microstructure effects in plasticized electrodes based on PVDF–HFP for plastic Li-ion batteries

12

Microstructure effects on high temperature fatigue crack initiation and short crack growth in turbine disc nickel-base superalloy Udimet 720Li

13

Microstructure effects on quantum efficiency in PtSi/p-Si(1 0 0) Schottky barrier detector

14

Microstructure Effects on the Forgeability of Zn-22AI Eutectoid Alloy

15

Microstructure effects on the response of gas-sensitive resistors based on semiconducting oxides

16

Microstructure effects on transverse cracking in composite laminae by DEM

17

Microstructure elucidation of poly(9-ethyl-3-hydroxymethylcarbazolyl methacrylate) using two-dimensional NMR spectroscopy

18

Microstructure evaluation and strengthening mechanism of Ni–P–W alloy coatings

19

Microstructure evaluation during plastic deformation in a centrifugal spray deposition (CSD) Ti-48Al-2Mn-2Nb alloy

20

Microstructure evaluation during plastic deformation in a centrifugal spray deposition (CSD) Ti-48Al-2Mn-2Nb alloy

21

Microstructure evaluation of Al2O3 ceramics with Mg-PSZ- and TiO2-additions

22

Microstructure evaluation of Al–Al2O3 composite produced by mechanical alloying method

23

Microstructure evaluation of MgO–C refractories with TiO2- and Al-additions

24

Microstructure evaluation of Ni–SDC synthesized with an innovative method and Ni–SDC/SDC bi-layer construction

25

Microstructure evaluation of sintered combustion-derived fine powder NiO–YSZ

26

Microstructure evaluations and hydrogenation properties on Ti–xNb–10Cr alloys

27

Microstructure evolution accompanying high temperature; uniaxial tensile creep of self-reinforced silicon nitride ceramics

28

Microstructure evolution accompanying high temperature; uniaxial tensile creep of self-reinforced silicon nitride ceramics

29

Microstructure evolution and analysis of a single crystal nickel-based superalloy during compressive creep

30

Microstructure evolution and conductivity of Bi2CuO4–Bi2O3 composites nearby the eutectic point

31

Microstructure evolution and corrosion mechanism of dicalcium phosphate dihydrate coating on magnesium alloy in simulated body fluid

32

Microstructure evolution and creep behavior of a [111] oriented single crystal nickel-based superalloy during tensile creep

33

Microstructure evolution and deformation behavior of ultrafine-grained Al–Zn–Mg alloys with fine η′ precipitates Original Research Article

34

Microstructure evolution and deformation features of AZ31 Mg-alloy during creep

35

Microstructure evolution and deformation mechanism change in 0.98C–8.3Mn–0.04N steel during compressive deformation

36

Microstructure evolution and degradation mechanisms of reactor internal steel irradiated with heavy ions

37

Microstructure evolution and density behavior of CP Ti parts elaborated by Self-developed vacuum selective laser melting system

38

Microstructure evolution and dielectric properties of Ba0.7Sr0.3TiO3 parallel plate capacitor with Cr interlayer

39

Microstructure Evolution and Dynamic Softening Mechanism of 00Cr22Ni5Mo3N DSS During Hot Compression Original Research Article

40

Microstructure evolution and electric properties with addition amounts of dysprosium (DyO1.5) in (BaCa)(TiZr)O3 ceramics

41

Microstructure evolution and electrical properties of yttria and magnesia stabilized zirconia

42

Microstructure evolution and elevated temperature compressive properties of a rapidly solidified NiAl–Cr(Nb)/Dy alloy

43

Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure

44

Microstructure evolution and flow behavior of hot-rolled aluminum – 5% B4C composite

45

Microstructure evolution and grain growth of nanocomposite TiN–TiB2 films: experiment and simulation

46

Microstructure evolution and grain size distribution in nanocrystalline FeNbBCu from synchrotron XRD and TEM analysis

47

Microstructure evolution and hardening mechanisms of Ni–P electrodeposits

48

Microstructure evolution and impact fracture behaviors of Z3CN20-09M stainless steels after long-term thermal aging

49

Microstructure evolution and interfacial failure mechanism in 316LSS diffusion-bonded joints

50

Microstructure evolution and its effect on the mechanical properties of the ZrC–SiC composite joint diffusion bonded with pure Ni foil

51

Microstructure evolution and its influence on deformation mechanisms during high temperature creep of a nickel base superalloy

52

Microstructure evolution and kinetic analysis of DM hot-work die steels during tempering

53

Microstructure evolution and magnetic properties of Co–B coatings electrolessly plated on hollow microspheres

54

Microstructure evolution and mechanical behavior of a high strength dual-phase steel under monotonic loading

55

Microstructure evolution and mechanical behavior of a new microalloyed high Mn austenitic steel during compressive deformation

56

Microstructure Evolution and Mechanical Hardening of Hypereutectoid Pearlitic Steel During Cold Rolling Original Research Article

57

Microstructure evolution and mechanical propertiesʹ improvement of NiAl–Cr(Mo)–Hf eutectic alloy during suction casting and subsequent HIP treatment

58

Microstructure evolution and mechanical properties in VC/SiC nanomultilayers

59

Microstructure evolution and mechanical properties of (Ti0.93W0.07)C–xWC–20Ni cermets

60

Microstructure evolution and mechanical properties of 7A09 high strength aluminium alloy processed by backward extrusion at room temperature

61

Microstructure evolution and mechanical properties of a hot-rolled directly quenched and partitioned steel containing proeutectoid ferrite

62

Microstructure evolution and mechanical properties of a nickel-based honeycomb sandwich aged at 900 °C

63

Microstructure evolution and mechanical properties of a novel beta γ-TiAl alloy

64

Microstructure evolution and mechanical properties of a particulate reinforced magnesium matrix composites forged at elevated temperatures

65

Microstructure evolution and mechanical properties of a Ti–35Nb–3Zr–2Ta biomedical alloy processed by equal channel angular pressing (ECAP)

66

Microstructure evolution and mechanical properties of AA1100 aluminum sheet processed by accumulative roll bonding

67

Microstructure evolution and mechanical properties of back extruded 7075 aluminum alloy at elevated temperatures

68

Microstructure evolution and mechanical properties of backward thixoextruded 7075 aluminum alloy

69

Microstructure evolution and mechanical properties of Cu/Zn multilayer processed by accumulative roll bonding (ARB)

70

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

71

Microstructure evolution and mechanical properties of Cu46Zr47Al7 bulk metallic glass composite containing CuZr crystallizing phases

72

Microstructure evolution and mechanical properties of dissimilar friction stir welded joints between AA1100-B4C MMC and AA6063 alloy

73

Microstructure evolution and mechanical properties of eutectoid steel with ultrafine or fine (ferrite+cementite) structure

74

Microstructure evolution and mechanical properties of Inconel 740H during aging at 750 °C

75

Microstructure evolution and mechanical properties of Mg-Gd-Sm-Zr alloys

76

Microstructure evolution and mechanical properties of nanocrystalline Ni–30Fe alloy

77

Microstructure evolution and mechanical properties of nanocrystalline zirconium processed by surface circulation rolling treatment

78

Microstructure evolution and mechanical properties of Nb–Si based alloy processed by electromagnetic cold crucible directional solidification

79

Microstructure evolution and mechanical properties of Ni3Al/Al2O3 composite during self-propagation high-temperature synthesis and hot extrusion

80

Microstructure evolution and mechanical properties of pure aluminum deformed by equal channel angular pressing and direct extrusion in one step through an integrated die

81

Microstructure evolution and mechanical properties of T15 high speed steel prepared by twin-atomiser spray forming and thermo-mechanical processing

82

Microstructure evolution and mechanical properties of TiB2/Cu composites processed by equal channel angular pressing at elevated temperature

83

Microstructure evolution and mechanical properties of transient liquid phase (TLP) bonded joints of TiAl intermetallics

84

Microstructure evolution and mechanical properties of vacuum-brazed C/C composite with AgCuTi foil

85

Microstructure evolution and mechanical properties response of a TZAV alloy during combined thermomechanical treatments

86

Microstructure evolution and mechanical response of extruded AZ31B magnesium alloy sheet at large strains followed by annealing treatment

87

Microstructure evolution and metastable phase formation in undercooled Fe–30 at.% Co melt

88

Microstructure evolution and metastable phase formation in undercooled Fe–30 at.% Co melt

89

Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium Original Research Article

90

Microstructure evolution and optical properties of c-axis-oriented ZnO thin films incorporated with silver nanoisland layers

91

Microstructure evolution and oxidation behaviour of Tif/TiAl3 composites

92

Microstructure evolution and properties of Cu–Ag microcomposites with different Ag content

93

Microstructure evolution and properties of Mg–3Sn–1Mn (wt%) alloy strip processed by semisolid rheo-rolling

94

Microstructure evolution and recrystallization during creep of MgO single crystals Original Research Article

95

Microstructure evolution and room temperature deformation of a unidirectionally solidified Nb-22Ti-16Si-3Ta-2Hf-7Cr-3Al-0.2Ho (at.%) alloy

96

Microstructure evolution and semi-solid deformation behavior of an A356 aluminum alloy processed by strain induced melt activated method

97

Microstructure evolution and shear strength of vacuum brazed joint for super-Ni/NiCr laminated composite with Ni–Cr–Si–B amorphous interlayer

98

Microstructure evolution and simulation of copolymerization reaction using a percolation kinetic gelation model

99

Microstructure evolution and strengthening mechanisms of Fe–23Mn–0.3C–1.5Al TWIP steel during cold rolling

100

Microstructure evolution and stress-rupture properties of Nimonic 80A after various heat treatments

101

Microstructure evolution and surface characteristics of NiP and CrN composite coatings under phosphate glasses molding process

102

Microstructure evolution and tensile properties of Ti–6.5Al–2Zr–Mo–V alloy processed with thermo hydrogen treatment

103

Microstructure evolution and texture development during high-temperature uniaxial compression of magnesium alloy AZ31

104

Microstructure evolution and texture development in thermomechanically processed Mg–Li–Al based alloys

105

Microstructure evolution and thermal properties in FeMoPCB alloy during mechanical alloying

106

Microstructure evolution and thermal properties in nanocrystalline Fe during mechanical attrition Original Research Article

107

Microstructure evolution and tribological properties of TiB2/Ni–Ta cermets

108

Microstructure evolution associated with adiabatic shear bands and shear band failure in ballistic plug formation in Ti–6Al–4V targets

109

Microstructure evolution during annealing of an amorphous TiAl sheet

110

Microstructure evolution during annealing of an amorphous TiAl sheet

111

Microstructure evolution during annealing of an amorphous TiAl sheet

112

Microstructure evolution during annealing of TiAl/NiCoCrAl multilayer composite prepared by EB-PVD

113

Microstructure evolution during BaTiO3 formation by solid-state reactions on rutile single crystal surfaces

114

Microstructure evolution during cold rolling in a nanocrystalline Ni–Fe alloy determined by synchrotron X-ray diffraction Original Research Article

115

Microstructure evolution during cyclic tests on EUROFER 97 at room temperature. TEM observation and modelling

116

Microstructure evolution during cycling in vacuum and air environments: Correlation with mechanical behaviour

117

Microstructure evolution during dewetting in thin Au films Original Research Article

118

Microstructure evolution during dynamic discontinuous recrystallization in particle-containing Cu

119

Microstructure evolution during dynamic recrystallization of hot deformed superalloy 718

120

Microstructure evolution during FSW/FSP of high strength aluminum alloys

121

Microstructure evolution during high strain rate tensile deformation of a fine-grained AZ91 magnesium alloy

122

Microstructure evolution during homogenization of Al–Mn–Fe–Si alloys: Modeling and experimental results Original Research Article

123

Microstructure evolution during hot rolling and heat treatment of the spray formed Vanadis 4 cold work steel

124

Microstructure evolution during metal forming processes

125

Microstructure evolution during semi-solid powder rolling and post-treatment of 7050 aluminum alloy strips

126

Microstructure evolution during service exposure of two cast, heat-resisting stainless steels — HP–Nb modified and 20–32Nb

127

Microstructure evolution during sintering of injection molded M2 high speed steel

128

Microstructure evolution during sintering of injection molded M2 high speed steel

129

Microstructure evolution during solid state reactions of Nb/Al multilayers Original Research Article

130

Microstructure evolution during solid-state foaming of titanium

131

Microstructure evolution during solid-state foaming of titanium

132

Microstructure evolution during spray rolling and heat treatment of 2124 Al

133

Microstructure evolution during surface alloying of ductile iron and austempered ductile iron by electron beam melting

134

Microstructure evolution during warm working of Ti–5Al–5Mo–5V–1Cr–1Fe at 600 and 800 °C

135

Microstructure evolution during warm working of Ti–6Al–4V with a colony-α microstructure Original Research Article

136

Microstructure evolution from the atomic scale up

137

Microstructure Evolution in 9Cr Martensitic Steel During Long-Term Creep at 650 °C Original Research Article

138

Microstructure evolution in a 3%Co modified P911 heat resistant steel under tempering and creep conditions

139

Microstructure evolution in a Mg–15Gd–0.5Zr (wt.%) alloy during isothermal aging at 250 °C

140

Microstructure evolution in a Pb-free solder alloy during mechanical fatigue

141

Microstructure evolution in a pearlitic steel subjected to progressive plastic deformation

142

Microstructure evolution in a pearlitic steel subjected to progressive plastic deformation

143

Microstructure evolution in abrasion-induced surface layer on an Al–Zn–Mg–Cu alloy

144

Microstructure evolution in adiabatic shear band in a-titanium

145

Microstructure evolution in adiabatic shear band in fine-grain-sized Ti–3Al–5Mo–4.5V alloy

146

Microstructure evolution in AISI201 austenitic stainless steel during the first compression cycle of multi-axial compression

147

Microstructure evolution in aluminum alloy AA 2014 during multi-layer friction deposition

148

Microstructure evolution in aqueous solutions of cetyl trimethylammonium bromide (CTAB) and phenol derivatives

149

Microstructure evolution in austenitic Fe–Cr–Ni alloys irradiated with rotons: comparison with neutron-irradiated microstructures

150

Microstructure evolution in CLAM steel under low cycle fatigue

151

Microstructure evolution in compacted granular beds

152

Microstructure evolution in copper under severe plastic deformation detected by in situ X-ray diffraction using monochromatic synchrotron light

153

Microstructure evolution in CuZrAl alloys during ball-milling

154

Microstructure evolution in deformed copper

155

Microstructure evolution in directionally solidified Fe–18Cr stainless steels

156

Microstructure evolution in directionally solidified Ti–(50, 52) at%Al alloys

157

Microstructure evolution in dry cast cellulose acetate membranes by cryo-SEM

158

Microstructure evolution in dry–wet cast polysulfone membranes by cryo-SEM: A hypothesis on macrovoid formation

159

Microstructure evolution in D–T neutron irradiated silver

160

Microstructure evolution in dual-phase stainless steel during severe deformation Original Research Article

161

Microstructure evolution in hot worked and annealed magnesium alloy AZ31

162

Microstructure evolution in laser alloyed layer of Cu–Fe–Al–Si on Cu substrate

163

Microstructure evolution in laser alloyed layer of Cu–Fe–Al–Si on Cu substrate

164

Microstructure evolution in nano/submicron grained AISI 301LN stainless steel

165

Microstructure evolution in pearlitic steels during wire drawing Original Research Article

166

Microstructure evolution in polyamide PA11 under small uniaxial extension

167

Microstructure evolution in pure titanium during warm deformation by combined rolling processes

168

Microstructure evolution in rapidly solidified Y added TiAl ribbons

169

Microstructure evolution in Sn–Bi and Sn–Bi–Cu solder joints under thermal aging

170

Microstructure evolution in solution treated Ti15Mo alloy processed by high pressure torsion

171

Microstructure evolution in the equal channel angular extrusion process Original Research Article

172

Microstructure evolution in the local loading forming of TA15 titanium alloy under non-isothermal condition

173

Microstructure evolution in thin zirconia films: Experimental observation and modelling Original Research Article

174

Microstructure evolution in TRIP-aided seamless steel tube during T-shape hydroforming process

175

Microstructure evolution in tungsten during low-energy helium ion irradiation

176

Microstructure evolution in zirconium carbide thin films at different substrate temperatures

177

Microstructure evolution in Zr1Nb fuel cladding during high-temperature oxidation

178

Microstructure evolution influenced by dislocation density gradients modeled in a reaction–diffusion system

179

Microstructure evolution mechanism of micron particle reinforced magnesium matrix composite at room temperature

180

Microstructure evolution modeling of FGH96 superalloy during inertia friction welding process

181

Microstructure evolution occurring in the modified surface of 316L stainless steel under high current pulsed electron beam treatment

182

Microstructure evolution of 2195 Al–Li alloy subjected to high-strain-rate deformation

183

Microstructure evolution of 316L stainless steel micro components prepared by micro powder injection molding

184

Microstructure evolution of 6061 O Al alloy during ultrasonic consolidation: An insight from electron backscatter diffraction Original Research Article

185

Microstructure evolution of a hypereutectic Nb–Ti–Si–Cr–Al–Hf alloy processed by directional solidification

186

Microstructure evolution of a modified AA5083 aluminum alloy during a multistage homogenization treatment

187

Microstructure evolution of a pre-compression nickel-base single crystal superalloy during tensile creep

188

Microstructure evolution of A356 alloy in a novel rheocasting approach

189

Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V

190

Microstructure evolution of adiabatic shear bands in AM60B magnesium alloy under ballistic impact

191

Microstructure evolution of AISI 316L in torsion at high temperature

192

Microstructure evolution of AISI 316L in torsion at high temperature Original Research Article

193

Microstructure evolution of Al/Mg butt joints welded by gas tungsten arc with Zn filler metal

194

Microstructure evolution of Al–12Si–CuNiMg alloy under high temperature low cycle fatigue

195

Microstructure evolution of Al2O3/Al2O3 joint brazed with Ag–Cu–Ti + B + TiH2 composite filler

196

Microstructure evolution of alloy 625 foil and sheet during creep at 750 °C

197

Microstructure evolution of AlN films deposited under various pressures by RF reactive sputtering

198

Microstructure evolution of alumina borate whisker reinforced AA2024 composite after T6 treatment

199

Microstructure evolution of alumina borate whisker reinforced AA2024 composite after T6 treatment

200

Microstructure evolution of AZ series magnesium alloys during cyclic extrusion compression

201

Microstructure evolution of AZ31 Mg alloy during equal channel angular extrusion

202

Microstructure evolution of C/Mo double-coated SiC fiber reinforced Ti6Al4V composites

203

Microstructure evolution of ceramic materials during solidification from melts in high-gravity combustion synthesis

204

Microstructure evolution of cobalt coating electroless plated on SiC whisker during electroless plating and heat treatment

205

Microstructure evolution of commercial pure titanium during equal channel angular pressing

206

Microstructure evolution of Cr coatings on Cu substrates prepared by mechanical alloying method

207

Microstructure evolution of Cu/Ag interface in the Cu–6 wt.% Ag filamentary nanocomposite Original Research Article

208

Microstructure evolution of CuInSe2 thin films prepared by single-bath electrodeposition

209

Microstructure evolution of Cu–Mn alloy under laser rapid solidification conditions

210

Microstructure evolution of different loading zones during TA15 alloy multi-cycle isothermal local forging

211

Microstructure evolution of electroless Ni-B film during its depositing process

212

Microstructure evolution of electroless Ni–P and Ni–Cu–P deposits on Cu in the presence of additives

213

Microstructure evolution of electron beam welded Ti3Al–Nb joint

214

Microstructure evolution of Fe-based WC composite coating prepared by laser induction hybrid rapid cladding

215

Microstructure evolution of fine-grain Fe–Cu composites during heat treatment in hydrogen

216

Microstructure evolution of grey cast iron powder by high pressure gas atomization

217

Microstructure evolution of high strength AlFeVTi nanoquasicrystalline alloys at elevated temperature

218

Microstructure evolution of high strength AlFeVTi nanoquasicrystalline alloys at elevated temperature

219

Microstructure evolution of highly Ga-doped ZnO nanocrystals

220

Microstructure evolution of high-performance Ni-base superalloy GTD-111 with heat treatment parameters

221

Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements

222

Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements

223

Microstructure evolution of hot-work tool steels during tempering and definition of a kinetic law based on hardness measurements

224

Microstructure evolution of HP40-Nb alloys during aging under air at 1000 °C

225

Microstructure evolution of hydrogenated silicon thin films at different hydrogen incorporation

226

Microstructure evolution of in situ Mg2Si/Al–Si–Cu composite in semisolid remelting processing

227

Microstructure evolution of irradiated tungsten: Crystal effects in He and H implantation as modelled in the Binary Collision Approximation

228

Microstructure evolution of laser clad layers of W–C–Co alloy powders

229

Microstructure evolution of laser surface remelted Zn-2.7 wt.%Cu hyperperitectic alloy

230

Microstructure evolution of Li uptake/removal in MoO2@C nanoparticles with high lithium storage performance

231

Microstructure evolution of medium carbon steel during manufacture process for non-quenched and tempered oil well tubes

232

Microstructure evolution of Mg–14% Li–1% Al alloy during the process of equal channel angular pressing

233

Microstructure evolution of Mg–Al–Zn alloys during compression test at low strain and temperature

234

Microstructure evolution of nanometer-sized hemispherical-grained Si deposited by RTCVD

235

Microstructure evolution of nanoprecipitates in half-Heusler TiNiSn alloys

236

Microstructure evolution of nanostructured and submicrometric porous refractory ceramics induced by a continuous high-energy proton beam

237

Microstructure evolution of near-α titanium alloys during thermomechanical processing

238

Microstructure evolution of Ni, Cr, Al–TaC in situ composite directionally solidified under a high temperature gradient

239

Microstructure evolution of Ni, Cr, Al–TaC in situ composite directionally solidified under a high temperature gradient

240

Microstructure evolution of Ni5Zn21 intermetallic compound at Sn–9 wt%Zn/Ni interface

241

Microstructure evolution of NiCoCrAlY overlay coating for Ni3Al based alloy IC6 turbine vane during long term engine test

242

Microstructure evolution of NiO–YSZ cermet during sintering

243

Microstructure evolution of periodic layers formed during solid state reaction between Zn and Ni3Si

244

Microstructure evolution of precursors-derived SiCN ceramics upon thermal treatment between 1000 and 1400 °C

245

Microstructure evolution of rheo-cast A356 aluminium alloy in consideration of different cooling conditions by means of the cooling channel process

246

Microstructure evolution of Si3N4/Si3N4 joint brazed with Ag–Cu–Ti + SiCp composite filler

247

Microstructure evolution of SIMA processed Al2024

248

Microstructure evolution of sol–gel HA films

249

Microstructure evolution of sub-critical annealed laser deposited Ti–6Al–4V alloy

250

Microstructure evolution of SUS303 free-cutting steel during hot compression process

251

Microstructure evolution of TA15 titanium alloy subjected to equal channel angular pressing and subsequent annealing at various temperatures

252

Microstructure evolution of the cast martensitic steel G-X12CrMoWVNbN 10-1-1 during creep at 823 K

253

Microstructure evolution of the full transition of bismuth metal to a bismuth oxide particulate

254

Microstructure evolution of the laser spot welded Ni-free Zr-based bulk metallic glass composites

255

Microstructure Evolution of the Stainless Steel 316L Subjected to Different Routes of Equal Channel Angular Pressing

256

Microstructure evolution of the transitional region in isothermal local loading of TA15 titanium alloy

257

Microstructure evolution of Ti3SiC2 powder during high-energy ball milling

258

Microstructure evolution of TiAl matrix in the process of magnetron sputtering and hot isostatic pressing for fabricating TiAl/SiCf composites

259

Microstructure evolution of TiO2 gas sensors produced by electrospinning

260

Microstructure evolution of Ti–Si–C–Ag nanocomposite coatings deposited by DC magnetron sputtering Original Research Article

261

Microstructure evolution of two model ferritic/martensitic steels under in situ ion irradiation at low doses (0–2 dpa)

262

Microstructure evolution of undercooled iron–copper hypoperitectic alloy

263

Microstructure evolution of undercooled iron–copper hypoperitectic alloy

264

Microstructure evolution of vacuum plasma sprayed CoNiCrAlY coatings after heat treatment and isothermal oxidation

265

Microstructure evolution of WC/steel composite by laser surface re-melting

266

Microstructure evolution of ZrN films annealed in vacuum

267

Microstructure evolution on the surface of stainless steel by Nd:YAG pulsed laser irradiation

268

Microstructure evolution process of porous silicon carbide ceramics prepared through coat-mix method

269

Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding

270

Microstructure evolution under compressive plastic deformation of magnesium at different temperatures and strain rates

271

Microstructure evolution under compressive plastic deformation of magnesium at different temperatures and strain rates

272

Microstructure evolution upon annealing of a ZrB2–SiC composite containing lanthana and magnesia

273

Microstructure evolution upon annealing of accumulative roll bonding (ARB) 1100 Al sheet materials: evolution of interface microstructures

274

Microstructure evolution, hardening and thermal behavior of commercially pure copper subjected to torsion deformation

275

Microstructure evolution, hot deformation behavior and mechanical properties of Ti-43Al-6Nb-1B alloy

276

Microstructure evolution, slip patterns and flow stress

277

Microstructure evolution, slip patterns and flow stress

278

Microstructure evolutions after friction stir welding of severely deformed aluminum sheets

279

Microstructure evolutions and electrical properties of Pb1−xLax(Zr0.56Ti0.44)1−x/4O3 ceramics

280

Microstructure evolutions of Mg-8Gd-2Er (wt.%) alloy during isothermal ageing at 200 °C

281

Microstructure evolutions of SiCp/AZ91 Mg matrix composites during hot compression

282

Microstructure evolvements of a rare-earth filled skutterudite compound during annealing and spark plasma sintering

283

Microstructure Evolving Behaviors of Undercooled Ultrafine Austenite Grains During Deformation Original Research Article

284

Microstructure features affecting mechanical properties and corrosion behavior of a hypoeutectic Al–Ni alloy

285

Microstructure features on rolling surfaces of railway rails subjected to heavy loading

286

Microstructure features on rolling surfaces of railway rails subjected to heavy loading

287

Microstructure fibers for gas detection

288

Microstructure formation and corrosion behaviour in HVOF-sprayed Inconel 625 coatings

289

Microstructure formation and corrosion behaviour in HVOF-sprayed Inconel 625 coatings

290

Microstructure formation and corrosion behaviour in HVOF-sprayed Inconel 625 coatings

291

Microstructure formation and in situ phase identification from undercooled Co–61.8 at.% Si melts solidified on an electromagnetic levitator and an electrostatic levitator Original Research Article

292

Microstructure formation during the annealing of iron nitrides

293

Microstructure formation in centrifugally cast Al–Bi alloys

294

Microstructure formation in electrodeposited Co–Cu/Cu multilayers with GMR effect: Influence of current density during magnetic layer deposition Original Research Article

295

Microstructure formation in high velocity oxy-fuel thermally sprayed Ni–Cr–Mo–B alloys

296

Microstructure formation in high velocity oxy-fuel thermally sprayed Ni–Cr–Mo–B alloys

297

Microstructure formation in neutron-irradiated V-1.6Y alloy at 800 °C

298

Microstructure formation in partially melted zone during gas tungsten arc welding of AZ91 Mg cast alloy

299

Microstructure formation in thermally-sprayed duplex and functionally graded NiCrAlY/Yttria-Stabilized Zirconia coatings

300

Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire

301

Microstructure formation of maltodextrin and sugar matrices in freeze-dried systems

302

Microstructure formation on exposure of silicon carbide surfaces to the partial oxidation of methane

303

Microstructure formed by eutectic reaction in a binary Cu–12.3Zr alloy

304

Microstructure formed by eutectic reaction in a binary Cu–12.3Zr alloy

305

Microstructure generation of severely deformed materials using Voronoi diagram in Laguerre geometry: Full algorithm

306

Microstructure gradient after hot torsion deformation of powder metallurgical 6061 Al alloy

307

Microstructure heterogeneity after the ECAP process and its influence on recrystallization in aluminium

308

Microstructure history effect during sequential thermomechanical processing

309

Microstructure homogeneity control in spark plasma sintering of Al2O3 ceramics

310

Microstructure homogeneity in various metallic materials heavily deformed by accumulative roll-bonding

311

Microstructure in 316LN stainless steel fatigued at low temperature

312

Microstructure in 316LN stainless steel fatigued at low temperature

313

Microstructure in a Cubic to Orthorhombic Transition

314

Microstructure in a Ni60Pd20P17B3 bulk metallic glass compressively fractured at cryogenic temperature

315

Microstructure in a plasma-nitrided Fe–18 mass% Cr alloy Original Research Article

316

Microstructure in chill-cast Al3Ti-based AlTiV ternary alloys

317

Microstructure in chill-cast Al3Ti-based AlTiV ternary alloys

318

Microstructure in Cu–Nb microcomposites

319

Microstructure in martensitic steels T91 and F82H after irradiation in SINQ Target-3

320

Microstructure in pure copper irradiated by simultaneous multi-ion beam of hydrogen, helium and self ions

321

Microstructure in rapidly solidified AlTiNi alloys

322

Microstructure in rapidly solidified AlTiNi alloys

323

Microstructure in relation to flow processing

324

Microstructure in the cubic to trigonal transition

325

Microstructure in the cubic to trigonal transition

326

Microstructure in the Weld Metal of Austenitic-Pearlitic Dissimilar Steels and Diffusion of Element in the Fusion Zone

327

Microstructure in Ti–48at.%Al PST crystal subjected to creep deformation

328

Microstructure in Ti–48at.%Al PST crystal subjected to creep deformation

329

Microstructure in vanadium irradiated by simultaneous multi-ion beam of hydrogen, helium and nickel ions

330

Microstructure influence on fatigue behaviour of nodular cast iron

331

Microstructure influence on fatigue crack propagation in sintered stainless steels

332

Microstructure inhomogeneity in ultra-fine grained bulk AZ91 produced by accumulative back extrusion (ABE)

333

Microstructure investigation and first-principle analysis of die-cast AZ91 alloy with calcium addition

334

Microstructure investigation and heat treatment of nanocrystalline laser-deposited carbon fibers

335

Microstructure Investigation and Mechanical Properties of Resistance Upset Butt Welded Ti6Al4V Alloy

336

Microstructure Investigation in Unsaturated Soils: A Review with Special Attention to Contribution of Mercury Intrusion Porosimetry and Environmental Scanning Electron Microscopy

337

Microstructure investigation of bronze/steel brazed joints proposed for HHF components of ITER manufacturing

338

Microstructure investigation of NiAl–Cr(Mo) interface in a directionally solidified NiAl–Cr(Mo) eutectic alloyed with refractory metal

339

Microstructure investigation of NiAl–Cr(Mo) interface in a directionally solidified NiAl–Cr(Mo) eutectic alloyed with refractory metal

340

Microstructure investigation of plasma sprayed HA/Ti6Al4V composites by TEM

341

Microstructure investigation of plasma sprayed HA/Ti6Al4V composites by TEM

342

Microstructure investigations of directionally solidified Mg-rich alloys containing Al, Ca and Sn

343

Microstructure investigations on two different aluminum wrought alloys after very high cycle fatigue

344

Microstructure mapping in friction stir welds of 7449 aluminium alloy using SAXS Original Research Article

345

Microstructure measurements in natural waters: Methodology and applications

346

Microstructure model reduction and uncertainty quantification in multiscale deformation processes

347

Microstructure modeling of rate-dependent fracture behavior in bituminous paving mixtures

348

Microstructure modelling of ferritic alloys under high flux 1 MeV electron irradiations

349

Microstructure modelling of hot deformation of Al–1%Mg alloy

350

Microstructure models for cellular materials

351

Microstructure modification and quasicrystalline phase formation in Al–Mn–Si–Be cast alloys

352

Microstructure modification and quasicrystalline phase formation in Al–Mn–Si–Be cast alloys

353

Microstructure modification of cement mortars: Effect on capillarity and frost-resistance

354

Microstructure modifications and associated hardness and corrosion improvements in the AISI 420 martensitic stainless steel treated by high current pulsed electron beam (HCPEB)

355

Microstructure modifications and corrosion behaviors of Cr4Mo4V steel treated by high current pulsed electron beam

356

Microstructure modifications and modulated piezoelectric responses in PLZT/Al2O3 composites

357

Microstructure modifications and phase transformation in plasma-sprayed WC–Co coatings following post-spray spark plasma sintering

358

Microstructure modifications induced by a laser surface treatment in an AA7449 aluminium alloy

359

Microstructure modifications of CrN coatings by pulsed bias sputtering

360

Microstructure modulation responsible for the improvement in thermoelectric property of a wide-gap AgIn5Se8 semiconductor

361

Microstructure morphology transitions at mesoscopic epitaxial surfaces

362

Microstructure near corners of continuous-cast steel slabs showing three-dimensional frozen meniscus and hooks Original Research Article

363

Microstructure noise in the continuous case: The pre-averaging approach

364

Microstructure observation and analysis of 3D carbon fiber reinforced SiC-based composites fabricated through filler enhanced polymer infiltration and pyrolysis

365

Microstructure observation and mechanical behavior modeling for limnetic nacre

366

Microstructure observation of β-sialon-15R ceramics synthesized from aluminum dross

367

Microstructure observations in rare earth element Gd-modified Ti-44 at% Al

368

Microstructure of (1 1 0)-oriented epitaxial SrRuO3 thin films grown on off-cut single crystal YSZ(1 0 0) substrates

369

Microstructure of (Ti,Si,Al)N nanocomposite coatings

370

Microstructure of (W,Ti)C–Co system containing platelet WC

371

Microstructure of 1Cr18Ni9Ti stainless steel by cryogenic compression deformation and annealing

372

Microstructure of 5-year-old mortars containing limestone filler damaged by thaumasite

373

Microstructure of a boron containing high purity nickel-based alloy 690

374

Microstructure of a boron containing high purity nickel-based alloy 690

375

Microstructure of a compacted soil submitted to an alkaline PLUME

376

Microstructure of a newly developed γ′ strengthened Co-base superalloy

377

Microstructure of a newly developed γ′ strengthened Co-base superalloy

378

Microstructure of a pressure die cast magnesium—4wt.% aluminium alloy modified with rare earth additions

379

Microstructure of a pressure die cast magnesium—4wt.% aluminium alloy modified with rare earth additions

380

Microstructure of a rapidly solidified Al–4V–2Fe ultrahigh strength aluminum alloy

381

Microstructure of a rapidly solidified Al–4V–2Fe ultrahigh strength aluminum alloy

382

Microstructure of a rapidly solidified Ti75Ni25 alloy by melt-spinning process

383

Microstructure of a rapidly solidified Ti75Ni25 alloy by melt-spinning process

384

Microstructure of a reactor pressure vessel steel close to the zones of ductile tearing and cleavage

385

Microstructure of a Variety of Cokes After Alkali Enrichment Original Research Article

386

MICROSTRUCTURE OF A356 AND AA7075 POURED BY COOLING SLOPE CASTING AT DIFFERENT POURING TEMPERATURES

387

Microstructure of AA2024-SiC nanostructured metal matrix composites

388

Microstructure of adiabatic shear bands in Ti6Al4V

389

Microstructure of Ag2S–As2S3 glasses

390

Microstructure of Ag-sheathed (Bi,Pb)2Sr2Ca2Cu3Ox tape

391

Microstructure of Ag-sheathed (Bi,Pb)2Sr2Ca2Cu3Ox tape

392

Microstructure of Al2O3 nanocrystalline/cobalt-based alloy composite coatings by laser deposition

393

Microstructure of Al3Sc with ternary rare-earth additions

394

Microstructure of Al3Sc with ternary transition-metal additions

395

Microstructure of Al3Sc with ternary transition-metal additions

396

Microstructure of Al-5Ti-1B-1RE nanoribbon and its refining efficiency on as-cast A356 alloys

397

Microstructure of Al95.5Cr2.5Si2(N1−xOx) thin films covering from nitrides to oxides

398

Microstructure of Al–Ag–Zn Alloys

399

Microstructure of Al–Al2O3 nanocomposite formed by in situ phase transformation during Al nanopowder consolidation

400

Microstructure of Al-alloy surface implanted with high-dose nitrogen

401

Microstructure of alkoxy and alkyl substituted isocyanate copolymers determined by desorption chemical ionization mass spectrometry

402

Microstructure of Al–Li alloy and its hydrolysis as portable hydrogen source for proton-exchange membrane fuel cells

403

Microstructure of AlLiCuMgZr alloys with In additions

404

Microstructure of AlLiCuMgZr alloys with In additions

405

Microstructure of Al–Mn–Be melt-spun ribbons

406

Microstructure of Al-Ti-B-Er refiner and its grain refining performance

407

Microstructure of alumina compact body made by slip casting

408

Microstructure of alumina reinforced with tungsten carbide

409

Microstructure of alumina–3wt.% titania coatings by plasma spraying with nanostructured powders

410

Microstructure of aluminized coating on a Ni–Cr alloy after annealing treatment

411

Microstructure of aluminized stainless steel 310 after annealing

412

Microstructure of amorphous and microcrystalline Si and SiGe alloys using X-rays and neutrons

413

Microstructure of amorphous diamond-like carbon thin films and changes during wear

414

Microstructure of an experimental Ni base superalloy under various casting conditions

415

Microstructure of an industrial char by diffraction techniques and Reverse Monte Carlo modelling Original Research Article

416

Microstructure of an oxide Ho2Mn2/3Ta4/3O7 with a pyrochlore-related structure

417

Microstructure of APS alumina–titania coatings analysed using artificial neural network Original Research Article

418

Microstructure of as-coated thermal barrier coatings with varying lifetimes

419

Microstructure of attrition ball-milled and explosively compacted iron powder alloys

420

Microstructure of Ba(Mg1/3Ta2/3)O3-BaSnO3 microwave dielectrics

421

Microstructure of Ba1−xLaxTiO3−δ ceramics sintered by Spark Plasma Sintering

422

Microstructure of ball milled MgH2 powders upon hydrogen cycling: An electron microscopy study

423

Microstructure of Bi3-xNdxTiNbO9 Bismuth Layer-Structured Ceramics

424

Microstructure of Bioglass/Hydroxyapatite Coatings on Ti Substrate

425

Microstructure of block copolymer/precursor assembly for Si–C–N based nano-ordered ceramics

426

Microstructure of block copolymers containing a conjugated segment, as studied with atomic force microscopy

427

Microstructure of boron carbide pressureless sintered in an Ar atmosphere containing gaseous metal species

428

Microstructure of both as-irradiated and deformed 304L stainless steel irradiated with 800 MeV protons

429

Microstructure of C/C composites prepared by chemical vapor infiltration method with vaporized kerosene as a precursor

430

Microstructure of calcite in the CM2 carbonaceous chondrite LON 94101: Implications for deformation history during and/or after aqueous alteration

431

Microstructure of Calcium Aluminates and their Mixes after 3 Days of Hydration

432

Microstructure of Calcium Aluminates and their Mixes after 3 Days of Hydration

433

Microstructure of carbon blacks determined by X-ray diffraction profile analysis Original Research Article

434

Microstructure of carbon fibers prepared laser CVD Original Research Article

435

Microstructure of carbon molecular sieve membranes and their application to separation of aqueous bioethanol Original Research Article

436

Microstructure of carbon nanotubes/PET conductive composites fibers and their properties

437

Microstructure of carbon/carbon composites reinforced with pitch-based ribbon-shape carbon fibers Original Research Article

438

Microstructure of cement mortar with nano-particles

439

Microstructure of cement paste subject to early carbonation curing

440

Microstructure of ceramic foams

441

Microstructure of ceramic thin films

442

Microstructure of cobalt dispersed carbon sphere prepared from chelate resin

443

Microstructure of colloidal liquid aphrons (CLAs) by freeze fracture transmission electron microscopy (FF-TEM)

444

Microstructure of Composite Material from High-Lime Fly Ash and RPET

445

Microstructure of composite YAG crystal/ceramics

446

Microstructure of creep-deformed V–4Cr–4Ti strengthened by precipitation and cold rolling

447

Microstructure of cryogenic treated M2 tool steel

448

Microstructure of cryogenic treated M2 tool steel

449

Microstructure of cryogenic treated M2 tool steel

450

Microstructure of Cu–Ni alloys neutron irradiated at 210°C and 420°C to 14 dpa

451

Microstructure of Czochralski silicon annealed at enhanced stress conditions

452

Microstructure of d.c. magnetron sputtered TiB2 coatings

453

Microstructure of dense thin sheets of γ-TiAl fabricated by hot isostatic pressing of tape-cast monotapes

454

Microstructure of dental porcelains in a laser-assisted rapid prototyping process

455

Microstructure of die cast and thixocast ZAEX10430 (Mg–10Zn–4Al–3Ce–0.3Ca) alloy

456

Microstructure of diesel soot particles probed by electron microscopy: First observation of inner core and outer shell

457

Microstructure of different chain length ionic liquids intercalated into montmorillonite: A molecular dynamics study

458

Microstructure of diffusion aluminide coatings on Ti-base alloy IMI-834 and their cyclic oxidation behaviour at 650 °C

459

Microstructure of diffusion aluminide coatings on Ti-base alloy IMI-834 and their cyclic oxidation behaviour at 650 °C

460

Microstructure of directionally solidified CrAsGaAs eutectic

461

Microstructure of duplex-phase NbSi2(C40)/MoSi2(C11b) crystals containing a single set of lamellae Original Research Article

462

Microstructure of eating behavior in humans

463

Microstructure of ECAP severely deformed iron and its mechanical properties

464

Microstructure of ECAP severely deformed iron and its mechanical properties

465

Microstructure of electrodeposited Fe–Pt binary alloy films

466

Microstructure of electrodeposited Fe–Pt binary alloy films

467

Microstructure of electroplated hard chromium coatings after plasma nitrocarburizing

468

Microstructure of epitaxial CuGaS2 on Si(111) Original Research Article

469

Microstructure of epitaxial layers deposited on silicon by ion assisted deposition

470

Microstructure of epitaxial scandium nitride films grown on silicon

471

Microstructure of epitaxial SrRuO3 thin films on MgO substrates

472

Microstructure of ethylene-1-hexene and ethylene-1-octene copolymers obtained over Ziegler–Natta catalysts supported on MgCl2(THF)2

473

Microstructure of expanded austenite in ion-nitrided AISI 316L single crystals

474

Microstructure of extruded cement-bonded fiberboard

475

Microstructure of Fe–25Cr/(La, Ca)CrO3 composite interconnector in solid oxide fuel cell operating conditions

476

Microstructure of Fe-Based Alloy Composite Coatings Reinforced by Ti (C0.3 N0.7) Particles Through Laser Cladding Technology Original Research Article

477

Microstructure of Fe-Based Alloy Hardfacing Coating Reinforced by TiC-VC Particles Original Research Article

478

Microstructure of Fe-Cr-C Hardfacing Alloys with Additions of Nb, Ti and, B

479

Microstructure of Fe–ZrSiO4 solid solutions prepared from gels

480

Microstructure of fine-grained β-type titanium alloy produced by mechanical alloying and consolidation process

481

Microstructure of fire-damaged concrete. A case study

482

Microstructure of first-stage aluminized coating on a Ni–Cr alloy

483

Microstructure of first-stage aluminized coating on a Ni–Cr alloy

484

Microstructure of free volume in SMA copolymers I. Free volume from Simha–Somcynsky analysis of PVT experiments

485

Microstructure of free volume in SMA copolymers II. Local free volume from PALS

486

Microstructure of freestanding single-crystalline Ni2MnGa thin films Original Research Article

487

Microstructure of friction surface developed on carbon fibre reinforced carbon–silicon carbide (Cf/C–SiC)

488

Microstructure of GaN nucleation layer during initial stage MOCVD growth

489

Microstructure of geopolymer accounting for associated mechanical characteristics under various stress states

490

Microstructure of heat resistant chromium steel weld metals

491

Microstructure of heavily neutron-irradiated SiC after annealing up to 1500 °C

492

Microstructure of helium-implanted and proton-irradiated T91 ferritic/martensitic steel

493

Microstructure of helium-implanted α-Al2O3 after annealing Original Research Article

494

Microstructure of high (45 wt.%) chromium cast irons and their resistances to wear and corrosion

495

Microstructure of high pressure die cast AZ91D modified with Ca and Ce

496

Microstructure of high strength niobium-containing pipeline steel

497

Microstructure of high temperature Ti-based brazing alloys and wettability on SiC ceramic

498

Microstructure of high-strength foam concrete

499

Microstructure of HK40 alloy after high temperature service in oxidizing/carburizing environment: I. Oxidation phenomena and propagation of a crack

500

Microstructure of HK40 alloy after high-temperature service in oxidizing/carburizing environment: II. Carburization and carbide transformations

501

Microstructure of hot-deformed Cu–3.45 wt.% Ti alloy

502

Microstructure of hot-deformed Cu–3.45 wt.% Ti alloy

503

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

504

Microstructure of hot-pressed Ti(C,N)-based cermets

505

Microstructure of humus horizons of gypsic soils from the Niecka Nidziańska area (South Poland)

506

Microstructure of hydrogenated silicon carbide thin films prepared by chemical vapour deposition techniques

507

Microstructure of hydrogenated silicon thin films prepared from silane diluted with hydrogen

508

Microstructure of hydroxyapatite- and octacalcium phosphate-coatings formed on magnesium by a hydrothermal treatment at various pH values Original Research Article

509

Microstructure of hydroxyapatite-coated magnesium prepared in aqueous solution

510

Microstructure of I–Al–Pd–Mn deformed at low and intermediate temperatures

511

Microstructure of I–Al–Pd–Mn deformed at low and intermediate temperatures

512

Microstructure of I–Al–Pd–Mn deformed at low and intermediate temperatures

513

Microstructure of Indirectly and Directly Heated Ultra-high-temperature (UHT) Processed Milk Examined using Transmission Electron Microscopy and Immunogold Labelling

514

Microstructure of indium tin oxide films deposited on porous silicon by rf-sputtering

515

Microstructure of individual grains in cold-rolled aluminium from orientation inhomogeneities resolved by electron backscattering diffraction

516

Microstructure of indocyanine green J-aggregates in aqueous solution Original Research Article

517

Microstructure of iron particles reduced from silica-coated hematite in hydrogen

518

Microstructure of iron sulfide layer as solid lubrication coating produced by low-temperature ion sulfurization

519

Microstructure of irradiated ferritic/martensitic steels in relation to mechanical properties

520

Microstructure of irradiated SBR MOX fuel and its relationship to fission gas release

521

Microstructure of LaCoO3 prepared by freeze-drying of metal–citrate precursors revealed by EPR Original Research Article

522

Microstructure of LaNiO3 thin films obtained by the spin-on technique from citrate precursors

523

Microstructure of laser boronized nodular iron

524

Microstructure of laser melted Al18B4O33w/2024Al composite

525

Microstructure of laser melted Zn–Al-based alloy

526

Microstructure of laser-clad SiC-(Ni alloy) composite coating

527

Microstructure of laser-clad SiC-(Ni alloy) composite coating

528

Microstructure of laser-induced combustion synthesis of Cu59.6Zr36.9Al3.5 alloy

529

Microstructure of latex-filled plaster composites

530

Microstructure of leached Al-Cu-Fe quasicrystal with high catalytic performance for steam reforming of methanol Original Research Article

531

Microstructure of Li(Mn1/3Ni1/3Co1/3)O2 cathode material for lithium ion battery: Dependence of crystal structure on calcination and heat-treatment temperature

532

Microstructure of long-term annealed highly irradiated beryllium

533

Microstructure of low alloyed steel close to the fracture surface

534

Microstructure of magnesium potassium phosphate cement

535

Microstructure of martensite in Fe–C–Cr steel

536

Microstructure of mesocarbon microbeads prepared from synthetic isotropic naphthalene pitch in the presence of carbon black Original Research Article

537

Microstructure of mesophase pitch-based carbon fiber and its control Original Research Article

538

Microstructure of mesophase-based carbon foam

539

Microstructure of metallurgical grade silicon during alloying refining with calcium

540

Microstructure of metal-organic deposited YBa2Cu3O7−δ wires with Dy and Zr additions observed by TEM

541

Microstructure of Mg–Zn–Ca thin film derived by pulsed laser deposition

542

Microstructure of microwave dielectricthin films by RF magnetron sputtering

543

Microstructure of minerals and yerba mate extract co-crystallized with sucrose Original Research Article

544

Microstructure of montmorillonite/silica sand mixture and its effects on the diffusion of strontium ions

545

Microstructure of Mozzarella cheese as affected by the immersion freezing in NaCl solutions and by the frozen storage Original Research Article

546

Microstructure of mullite fiber-based hierarchical structures adjusted by Al/Si mole ratio of the raw material powders

547

Microstructure of nano SiC dispersed Al2O3–ZrO2 composites

548

Microstructure of nanocrystalline TiO2 films produced by electrophoretic deposition on Ti–6Al–7Nb alloy

549

Microstructure of nanophase fullerene particles made via aerosol decomposition

550

Microstructure of nanoporous yttria-stabilized zirconia films fabricated by EB-PVD

551

Microstructure of natural graphite flakes revealed by oxidation: Limitations of XRD and Raman techniques for crystallinity estimates

552

Microstructure of Nb substrates coated with Mo(Si,Al)2–Al2O3 composite and B-doped Mo5Si3 layers by spark plasma sintering

553

Microstructure of Nb–Al powders consolidated by spark plasma sintering process

554

Microstructure of Nb–Al powders consolidated by spark plasma sintering process

555

Microstructure of Nd-Ga-O/sub 3/ new seed layer for LPE growth of YBCO film

556

Microstructure of neutron irradiated SS316L/DS-Cu joint

557

Microstructure of neutron-irradiated iron before and after tensile deformation

558

Microstructure of new composite electrocatalyst and its anodic behavior for chlorine and oxygen evolution

559

Microstructure of Ni(Cr)–TiC–Cr3C2–Cr7C3 composite powder

560

Microstructure of Ni/WC surface composite on a copper substrate

561

Microstructure of Ni–polytetrafluoroethylene composite coating prepared by brush electroplating

562

Microstructure of nitrogen implanted stainless steel after wear experiment

563

Microstructure of ordered Pd–8at.%Y alloys

564

Microstructure of organometallic derived PLZT ceramics

565

Microstructure of oxide dispersion strengthened Eurofer and iron–chromium alloys investigated by means of small-angle neutron scattering and transmission electron microscopy

566

Microstructure of oxide layers formed on zirconium alloy by air oxidation, uniform corrosion and fresh-green surface modification

567

Microstructure of oxide scales on aluminide diffusion coatings after short time oxidation at 1050 °C

568

Microstructure of pair centers of Cr3+-Cr2+ ions in the KZnF3 crystal

569

Microstructure of PdCeO2 catalyst: Effect of high temperature reduction in hydrogen Original Research Article

570

Microstructure of PE-separators

571

Microstructure of phosphorus ion-implanted TiNi alloy

572

Microstructure of plasma nitrided layers on aluminium

573

Microstructure of plasma-sprayed titania coatings deposited from spray-dried powder

574

Microstructure of plastic zones around crack tips in silicon revealed by HVEM and AFM

575

Microstructure of plastic zones around crack tips in silicon revealed by HVEM and AFM

576

Microstructure of plastic zones around crack tips in silicon revealed by HVEM and AFM

577

Microstructure of polarized electrochemical vapor deposition (PEVD) products

578

Microstructure of polypropylene

579

Microstructure of poly-Si thin films prepared at low temperatures

580

Microstructure of porous gallium nitride nanowall networks

581

Microstructure of Portland cement pastes containing metal nitrate salts

582

Microstructure of precipitates and magnetic domain structure in an annealed image shape memory alloy Original Research Article

583

Microstructure of pre-wetted aggregate on lightweight concrete

584

Microstructure of protein-coated paper as affected by physico-chemical properties of coating solutions

585

Microstructure of Pt modified aluminide coatings on Ni-based superalloys without prior Pt diffusion

586

Microstructure of Pt-modified aluminide coatings on Ni-based superalloys

587

Microstructure of pulsed laser deposited FePd thin films on amorphous and crystalline substrates

588

Microstructure of PVdF-co-HFP based electrolyte prepared by preferential polymer dissolution process

589

Microstructure of pyrocarbons from pair distribution function analysis using neutron diffraction Original Research Article

590

Microstructure of rapidly solidified Al–20Si alloy powders

591

Microstructure of rapidly solidified Al–20Si alloy powders

592

Microstructure of rapidly solidified Cu–25 wt.% Cr alloys

593

Microstructure of rapidly solidified Cu–25 wt.% Cr alloys

594

Microstructure of rapidly solidified Cu–Al–Ni shape memory alloy ribbons

595

Microstructure of rapidly solidified Ti–Al–V and Ti–Al–Si–V alloys

596

Microstructure of rapidly solidified Ti–Al–V and Ti–Al–Si–V alloys

597

Microstructure of reaction zone in WCp/duplex stainless steels matrix composites processing by laser melt injection

598

Microstructure of reaction-bonded silicon nitride fabricated under static nitrogen pressure

599

Microstructure of reduced magnetite as a function of aluminum content and reduction temperature Original Research Article

600

Microstructure of RERTR DU-alloys irradiated with krypton ions up to 100 dpa

601

Microstructure of retrograded starch: Quantification from lacunarity analysis of SEM micrographs Original Research Article

602

Microstructure of saturated bentonites characterized by X-ray CT observations

603

Microstructure of seal formed between a Nb wire and an Al2O3 capillary melted by YAG laser radiation

604

Microstructure of second-phase particles in high-temperature Ti-55 alloy after creep

605

Microstructure of selected aggregate quartz by XRD, and a critical review of the crystallinity index

606

Microstructure of selective laser melted nickel–titanium

607

Microstructure of selectively heated (hot spot) region in Fe3O4 powder compacts by microwave irradiation

608

Microstructure of severely deformed Al–3Mg and its evolution during annealing Original Research Article

609

Microstructure of Si Cones Prepared by Ar^+-Sputtering Si/Mo Target

610

Microstructure of SiC deposited from methyltrichlorosilane

611

Microstructure of Silica Particle Monolayer Films Formed by Capillary immersion Force

612

Microstructure of silicon carbide nano powder–polycarbosilane–solvent mixed slurries and observed shear rate dependence in slurry viscosity

613

Microstructure of silicon-incorporated carbon films with various silicon concentrations deposited by hybrid magnetron sputtering/chemical vapor deposition

614

Microstructure of single-phase cobalt and manganese oxide spinel Mn3−xCoxO4 ceramics

615

Microstructure of sleep in depressed patients according to the cyclic alternating pattern

616

Microstructure of sodium polysialate siloxo geopolymer

617

Microstructure of Solid Phase Reduction on Manganese Oxide Ore Fines Containing Coal by Microwave Heating Original Research Article

618

Microstructure of some quenched Zr–Cu-based alloys

619

Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics

620

Microstructure of spray converted nanostructured tungsten carbide-cobalt composite

621

Microstructure of spray converted nanostructured tungsten carbide-cobalt composite

622

Microstructure of Steel 5Cr21Mn9Ni4N Alloyed by Rare Earth Original Research Article

623

Microstructure of surface composite Al2O3/Ni on copper substrate produced by vacuum infiltration casting

624

Microstructure of suspension plasma sprayed multilayer coatings of hydroxyapatite and titanium oxide

625

Microstructure of the coating and mechanical properties of galvanized chromium-rich martensitic steel

626

Microstructure of the composite oxynitrided chromium layers produced on steel by a duplex method

627

Microstructure of the F82H martensitic steel irradiated in STIP-II up to 20 dpa

628

Microstructure of the Fe-based hardfacing layers reinforced by TiC-VC-Mo2C particles

629

Microstructure of the flow field around a bubble in counter-current bubbly flow

630

Microstructure of the irradiated U3Si2/Al silicide dispersion fuel

631

Microstructure of the LiCoO2 (cathode)/La2/3−xLi3xTiO3 (electrolyte) interface and its influences on the electrochemical properties Original Research Article

632

Microstructure of the ligament-to-bone attachment complex in the human knee joint

633

Microstructure of the mechanically alloyed and electrochemically etched Ti–6Al–4V and Ti–15Zr–4Nb nanocrystalline alloys

634

Microstructure of the near-surface layers of austenitic stainless steels irradiated with a low-energy, high-current electron beam

635

Microstructure of the Ni binder phase in a TiC–Mo2C–Ni cermet

636

Microstructure Of The Nickel-Base Aging Martensite Alloy After Spinning Process Of Thin Tube At Different Strain Reduction

637

Microstructure of the NPP Kozioduy Unit I Weld 4 Metal

638

Microstructure of the NPP Kozioduy Unit I Weld 4 Metal

639

Microstructure of the NPP Kozloduy Unit 1 Weld 4 Metal Original Research Article

640

Microstructure of the post-ECAP aging processed 6061 Al alloys

641

Microstructure of the pyrocarbon in aligned carbon nanotube/carbon composites

642

Microstructure of the pyrocarbon matrix in carbon/carbon composites

643

Microstructure of the pyrocarbon matrix prepared by the CLVI process

644

Microstructure of the pyrocarbon matrix prepared by the CLVI process

645

Microstructure of the quasi-one dimensional organic conductor (FA)2PF6

646

Microstructure of the spray formed Vanadis 4 steel and its ultrafine structure

647

Microstructure of the worn surfaces of a bainitic steel railway crossing

648

Microstructure of thermoelectric SiGe alloys containing fullerite

649

Microstructure of thermoelectric SiGe alloys containing fullerite

650

Microstructure of thick chromium–nitride coating synthesized using plasma assisted MOCVD technique

651

Microstructure of thin films prepared by plasma-enhanced chemical vapour deposition of helium-diluted silane

652

Microstructure of Ti5Al2.5Sn and Ti6Al4V deformed in tensile and fatigue tests

653

Microstructure of TiAlN and CrAlN coatings and cutting performance of coated silicon nitride inserts in cast iron turning

654

Microstructure of TiB2/B4C Composites with 1% Y2O3 Prepared by Co-Precipitating and in Situ Synthesis

655

Microstructure of TiC–W cladding on steel in nanoscale

656

Microstructure of Tin Dispersed Aluminum-Silicon Alloys Prepared By Solidification in a Wedge Mold

657

Microstructure of TiN/ carbon steel functionally gradient materials processed by high-energy electron beam irradiation

658

Microstructure of TiN/ carbon steel functionally gradient materials processed by high-energy electron beam irradiation

659

Microstructure of tobacco chars and the origin of associated graphite as determined by high-resolution transmission electron microscopy (HRTEM)

660

Microstructure of tricalcium silicate and Portland cement systems at middle periods of hydration-development of Hadley grains

661

Microstructure of TRISO coated particles from the AGR-1 experiment: SiC grain size and grain boundary character

662

Microstructure of Triton X-100/poly (ethylene glycol) complex investigated by fluorescence resonance energy transfer

663

Microstructure of turbulence in the northern North Sea: a comparative study of observations and model simulations

664

Microstructure of two centrifugal cast high speed steels for hot strip mills applications

665

Microstructure of two polypropylene homopolymers with improved impact properties

666

Microstructure of two-phase Al–1.7 at% Cu alloy deformed by equal-channel angular pressing Original Research Article

667

Microstructure of U3Si2 fuel plates submitted to a high heat flux

668

Microstructure of ultrafine-grained fcc metals produced by severe plastic deformation

669

Microstructure of ultra-fine-grained high carbon steel prepared by equal channel angular pressing

670

Microstructure of undercooled Pb–Sn alloys

671

Microstructure of undercooled Pb–Sn alloys

672

Microstructure of under-cooled Sn–Bi and Al–Si alloys

673

Microstructure of under-cooled Sn–Bi and Al–Si alloys

674

Microstructure of vanadium alloys during ion irradiation with stepwise change of temperature

675

Microstructure of veneered zirconia after surface treatments: A TEM study

676

Microstructure of warm rolling and pearlitic transformation of ultrafine-grained GCr15 steel

677

Microstructure of welded and thermal-aged low activation steel F82H IEA heat

678

Microstructure of Whole Wheat versus White Flour and WheatChickpea Flour Blends and Dough: Impact on the Glycemic Response of Pan Bread

679

Microstructure of wood charcoal prepared by flash heating Original Research Article

680

Microstructure of X210Cr12 steel after the forming in semi-solid state visualized by very low energy SEM in ultra high vacuum

681

Microstructure of Y2O3 doped Al2O3–ZrO2 eutectics grown by the laser floating zone method

682

Microstructure of Yb and Li co-doped ZnO by electron microscopy

683

Microstructure of YBa2Cu3O6 + x sintered in air and its influence on melt-textured microstructure

684

Microstructure of YBa2Cu3O6 + x sintered in air and its influence on melt-textured microstructure

685

Microstructure of YBCO bulk superconductors with CeO2 addition

686

Microstructure of yttria stabilized zirconia deposited by plasma spraying

687

Microstructure of yttric calcium phosphate bioceramic coatings synthesized by laser cladding

688

Microstructure of Zr-alloyed coating using pulsed laser

689

Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD

690

Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD

691

Microstructure of ZrO2-CeO2 hetero-multi-layer films grown on YSZ substrate

692

Microstructure of ZrO2–CeO2 hetero-multi-layer films grown on YSZ substrate Original Research Article

693

Microstructure optimization of austenitic Alloy 800H (Fe–21Cr–32Ni)

694

Microstructure optimization of ingot metallurgy TiAl

695

Microstructure optimization to achieve high coercivity in anisotropic Nd–Fe–B thin films Original Research Article

696

Microstructure parameters affecting alkali–silica reactivity of aggregates

697

Microstructure parameters affecting interfacial adhesion of thermal barrier coatings by the EB-PVD method

698

Microstructure prediction of Nimonic 80A for large exhaust valve during hot closed die forging

699

Microstructure prediction of the austenite recrystallization during multi-pass steel strip hot rolling: A cellular automaton modeling

700

Microstructure preparation and hot-deformation of Ti–46.2Al–2.0V–1.0Cr–0.5Ni alloy

701

Microstructure properties of pulse plated Ni–Co alloy

702

Microstructure properties of tempered D6ac steel

703

Microstructure property analysis of HFIR-irradiated reduced-activation ferritic/martensitic steels

704

Microstructure quantification and correlation with flow stress of ultrafine grained commercially pure Al fabricated by equal channel angular pressing (ECAP)

705

Microstructure reconstruction and characterization of PEMFC electrodes

706

Microstructure reconstruction of fibrous C/C composites from X-ray microtomography Original Research Article

707

Microstructure reconstructions from 2-point statistics using phase-recovery algorithms Original Research Article

708

Microstructure refinement and alloying of WC–CoCr coatings by electron beam treatment

709

Microstructure refinement and its effect on properties of spring steel

710

Microstructure refinement and mechanical properties improvement of HfB2–SiC composites with the incorporation of HfC

711

Microstructure refinement and mechanical properties of severely deformed Al–Mg–Li alloys

712

Microstructure refinement and mechanical properties of severely deformed Al–Mg–Li alloys

713

Microstructure refinement approaches of melt-grown Al2O3/YAG/ZrO2 eutectic bulk

714

Microstructure refinement mechanism of Cu–7Cr in situ composites with trace Ag

715

Microstructure refinement of a TiAl alloy by beat treatment

716

Microstructure refinement of a TiAl alloy by beat treatment

717

Microstructure refinement of alumina: Optimisation by gas pressure sintering process

718

Microstructure refinement of hypereutectic high Cr cast irons using hard carbide-forming elements for improved wear resistance

719

Microstructure regulation of super activated carbon from biomass source corncob with enhanced hydrogen uptake

720

Microstructure related photoluminescence in a-CNx films deposited by reactive rf magnetron sputtering

721

Microstructure related transport phenomena in chemically deposited PbSe films

722

Microstructure research of glasses by impulse excitation technique (IET)

723

Microstructure scaling properties and fatigue resistance of pre-strained aluminium alloys (part 1: Al–Cu alloy)

724

Microstructure selection criteria for cast irons with more than 10 wt.% chromium for wear applications

725

Microstructure selection during the directionally peritectic solidification of Ti–Al binary system

726

Microstructure selections in the undercooled hypereutectic Al–Si alloys

727

Microstructure sensitive design for performance optimization

728

Microstructure sensitive design of an orthotropic plate subjected to tensile load

729

Microstructure sensitivity of fretting fatigue based on computational crystal plasticity

730

Microstructure simulation and ballistic behaviour of weld zones in friction stir welds in high strength aluminium 7xxx plate

731

Microstructure stability and evolution in CVD carbonyl Ni materials upon annealing – Grain growth and detwinning process

732

Microstructure stability and mechanical properties of an age-hardenable Ni–Mo–Cr alloy subjected to long-term exposure to elevated temperature

733

Microstructure stability of as-extruded bimodal size SiCp/AZ91 composite

734

Microstructure stability of ultra-fine grained magnesium alloy AZ31 processed by extrusion and equal-channel angular pressing (EX–ECAP)

735

Microstructure stability studies of Ni patterned anodes for SOFC

736

Microstructure strengthening mechanisms in an Al–Mg–Si–Sc–Zr equal channel angular pressed aluminium alloy

737

Microstructure strengthening mechanisms in different equal channel angular pressed aluminum alloys

738

Microstructure studies of an aluminide coating on 9Cr-1Mo steel during high temperature oxidation

739

Microstructure studies of Zr65Cu17.5Al7.5Ni10 and Zr65Cu15Al10Ni10 glass forming alloys: Phase morphologies and undercooled melt solidification

740

Microstructure studies ofPdGe/Ge ohmic contacts to n-type GaAs formed by rapid thermal annealing

741

Microstructure studies on biosurfactant-rhamnolipid/n-butanol/water/n-heptane microemulsion system

742

Microstructure studies on hexagonal layered Ni-S nanocrystals

743

Microstructure studies on Portland cement pastes obtained in highly alkaline environments

744

Microstructure study and constitutive modeling of Ti–6Al–4V alloy at elevated temperatures

745

Microstructure study of a nanocrystalline two-phase ZrNxOy thin film

746

Microstructure study of a γ-TiAl based alloy containing W and Si

747

Microstructure study of a γ-TiAl based alloy containing W and Si

748

Microstructure study of Al 7050 alloy reprocessed by spray forming and hot-extrusion and aged at 121 °C

749

Microstructure study of amorphous vanadium oxide films

750

Microstructure study of CVD W coating on Mo single crystal rods with 〈1 1 1〉 axial orientation by EBSD

751

Microstructure study of direct laser fabricated Ti alloys using powder and wire

752

Microstructure study of laser welding cast nickel-based superalloy K418

753

Microstructure study of PAN-pitch carbon–carbon composite lubricative film

754

Microstructure study of PAN–pitch-based carbon–carbon composite

755

Microstructure study of the hardening mechanism of Cr–Ni alloy deposits after flame heating for a few seconds

756

Microstructure Study on A1-5%SiC Nanocomposite Powders

757

Microstructure tailoring for property improvements by grain boundary engineering

758

Microstructure tailoring of conjugated polymer-electrolyte blends for light-emitting electrochemical cells

759

Microstructure tailoring of the nickel–yttria stabilised zirconia (Ni–YSZ) cermet hollow fibres

760

Microstructure tailoring of YSZ/Ni-YSZ dual-layer hollow fibers for micro-tubular solid oxide fuel cell application

761

Microstructure to magnetic behaviour relationship of annealed Fe–TM–B–Cu alloys

762

Microstructure to magnetic behaviour relationship of annealed Fe–TM–B–Cu alloys

763

Microstructure to property relations in a family of millable polyurethane fluoroelastomers

764

Microstructure toughness relationships in fully lamellar γ-based titanium aluminides

765

Microstructure toughness relationships in fully lamellar γ-based titanium aluminides

766

Microstructure transformation and interface structure of Co/Pt nano-multilayers prepared by ion beam sputtering deposition (IBSD)

767

Microstructure transformation and mechanical properties of TiC–TiB2 ceramics prepared by combustion synthesis in high gravity field

768

Microstructure Transformation Behaviour of 610 MPa HSLA Steel Plate for 150000 m3 Oil Storage Tank Construction Original Research Article

769

Microstructure transformation during warm working of β-treated lamellar Zircaloy-4 within the upper α-range

770

Microstructure transformation of Pd membrane deposited on a porous Inconel substrate in hydrogen permeation at elevated temperature

771

Microstructure transformation of PDMS-E grafted gelatin polymers induced by SDS and SDBS

772

Microstructure transformations and cracking in the matrix of γ–γ′ superalloy Inconel 713C melted with electron beam

773

Microstructure transformations of laser-surface-melted near-alpha titanium alloy

774

Microstructure transition from lamellar to compacted graphite using different modification agents

775

Microstructure transition from normal to abnormal grains for BaTiO3

776

Microstructure transmissibility in preparing SiC ceramics from natural wood

777

Microstructure turbulence and diffusivity parameterization in the tropical and subtropical Atlantic, Pacific and Indian Oceans during the Malaspina 2010 expedition

778

Microstructure variability and macroscopic composite properties of high performance fiber reinforced cementitious composites

779

Microstructure variability in freshwater microbialites, Pavilion Lake, Canada

780

Microstructure Variation and Hardness Diminution During Low Cycle Fatigue of 55NiCrMoV7 Steel Original Research Article

781

Microstructure variations with concentration of propylene glycol–water solution probed by NMR

782

Microstructure with multiple assets: an experimental investigation into direct and indirect dealer competition

783

Microstructure, a Limiting Parameter for Determining the Engineering Range of Compositions for Light Alloys: The Al-Cu-Si System

784

Microstructure, adhesion and tribological properties of W–C:Hx% coatings deposited on M2 and WC substrates

785

Microstructure, and luminescence properties of LiBaPO4:Dy3+ phosphors with various Dy3+ concentrations prepared by microwave assisted sintering

786

Microstructure, antibacterial properties and wear resistance of plasma Cu–Ni surface modified titanium

787

Microstructure, bioactivity and osteoblast behavior of monoclinic zirconia coating with nanostructured surface

788

Microstructure, bonding strength and thermal shock resistance of ceramic coatings on steels prepared by plasma electrolytic oxidation

789

Microstructure, brittle–ductile transition temperature and elevated temperature compressive behavior of the directionally solidified NiAl–Cr(Mo)–Hf alloy

790

Microstructure, brittle–ductile transition temperature and elevated temperature compressive behavior of the directionally solidified NiAl–Cr(Mo)–Hf alloy

791

Microstructure, brittle–ductile transition temperature and elevated temperature compressive behavior of the directionally solidified NiAl–Cr(Mo)–Hf alloy

792

Microstructure, capillary performance and gas permeability of biporous copper fabricated by tape casting

793

Microstructure, chemical composition and properties of the surface layer of M2 steel after laser melting under different conditions

794

Microstructure, chemical states, and mechanical properties of magnetron co-sputtered V1 − xAlxN coatings

795

Microstructure, cold workability and strain hardening behavior of trimodaled AA 6061–TiO2 nanocomposite prepared by mechanical alloying

796

Microstructure, composition and critical current density of superconducting Nb3Sn wires Original Research Article

797

Microstructure, composition and hardness of laser-assisted hydroxyapatite and Ti-6Al-4V composite coatings

798

Microstructure, composition and oxidation resistance of nanostructured NiAl and Ni–Al–N coatings produced by magnetron sputtering

799

Microstructure, composition and processing of 15th century Vietnamese porcelains and celadons

800

Microstructure, corrosion and wear performance of plasma electrolytic oxidation coatings formed on Ti–6Al–4V alloy in silicate-hexametaphosphate electrolyte

801

Microstructure, corrosion behavior and cytotoxicity of Zr–Nb alloys for biomedical application

802

Microstructure, corrosion properties and bio-compatibility of calcium zinc phosphate coating on pure iron for biomedical application

803

Microstructure, corrosion resistance and biocompatibility of titanium incorporated amorphous carbon nitride films

804

Microstructure, corrosion resistance and cytocompatibility of Mg–5Y–4Rare Earth–0.5Zr (WE54) alloy

805

Microstructure, creep, and tensile behavior of a Ti–12Al–38Nb (at.%) beta+orthorhombic alloy

806

Microstructure, creep, and tensile behavior of a Ti–12Al–38Nb (at.%) beta+orthorhombic alloy

807

Microstructure, creep, and tensile behavior of a Ti–21Al–29Nb(at.%) orthorhombic+B2 alloy

808

Microstructure, crystal structure and mechanical properties of the new ternary intermetallic alloy phase Zr2TiAl

809

Microstructure, crystallinity, and properties of low-pressure MOCVD-grown europium oxide films

810

Microstructure, crystallographic texture and mechanical properties of friction stir welded AA2017A

811

Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing

812

Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing

813

Microstructure, crystallography, and shape memory effect in equiatomic NbRu

814

Microstructure, crystallography, and shape memory effect in equiatomic NbRu

815

Microstructure, cytotoxicity and corrosion of powder-metallurgical iron alloys for biodegradable bone replacement materials

816

Microstructure, dangling bonds and impurities in activated carbons Original Research Article

817

Microstructure, deformation and cracking characteristics of thermal spray ferrous coatings

818

Microstructure, deformation and cracking characteristics of thermal spray ferrous coatings

819

Microstructure, deformation and failure of polymer bonded explosives

820

Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process

821

Microstructure, dielectric and ferroelectric properties of (NaxBi0.5)0.94Ba0.06TiO3 lead-free ferroelectric ceramics: Effect of Na nonstoichiometry

822

Microstructure, dielectric and ferroelectric properties of xBaZr0.2Ti0.8O3-(1 − x)BiFeO3 solid solution ceramics

823

Microstructure, dielectric and optical properties of compositionally graded Ba1−xSrxTiO3 thin film

824

Microstructure, dielectric and pyroelectric properties of CaCu3Ti4O12 ceramics fabricated by tape-casting method

825

Microstructure, dielectric properties and hydrogen gas sensitivity of sputtered amorphous Ba0.67Sr0.33TiO3 thin films

826

Microstructure, dielectric response and electrical properties of polypyrrole modified (poly N-vinyl carbazole–Fe3O4) nanocomposites

827

Microstructure, domain morphology and piezoelectric properties of Si-doped Pb(Mn1/3Sb2/3)O3–Pb(Zr,Ti)O3 systems

828

Microstructure, elastic properties and deformation mechanisms of horn keratin

829

Microstructure, electrical and ethanol-sensing properties of perovskite-type SmFe0.7Co0.3O3

830

Microstructure, electrical and mechanical properties of MgO nanoparticles-reinforced porous PZT 95/5 ferroelectric ceramics

831

Microstructure, electrical properties and Hall coefficient of europium-doped Li–Ni ferrites

832

Microstructure, electrical properties and phase equilibria relationships in the ZrO2Y2O3TiO2 system: The subsolidus isothermal section at 1500°C

833

Microstructure, electrical properties and phase equilibria relationships in the ZrO2Y2O3TiO2 system: The subsolidus isothermal section at 1500°C

834

Microstructure, electrical properties, and aging behavior of ZnO–Pr6O11–CoO–Cr2O3–Y2O3–Er2O3 varistor ceramics

835

Microstructure, electrical properties, and dc aging characteristics of Tb4O7-doped ZnO-based varistors

836

Microstructure, fatigue and corrosion properties of the Ti–Al intermetallic layers

837

Microstructure, ferroelectric and piezoelectric properties of Bi0.5K0.5TiO3-modified BiFeO3–BaTiO3 lead-free ceramics with high Curie temperature

838

Microstructure, friction and wear properties of αFeSi2–graphite composite specimens

839

Microstructure, geotechnical and mechanical characteristics of quicklime-lateritic gravels mixtures used in road construction

840

Microstructure, growth mechanism and mechanical property of Al2O3-based eutectic ceramic in situ composites

841

Microstructure, hardness and corrosion behaviour of Ti/TiN multilayer coatings produced by plasma activated EB-PVD

842

Microstructure, hardness and electrical properties of silver-based refractory contact materials

843

Microstructure, hardness and tensile properties of A380 aluminum alloy with and without Li additions

844

Microstructure, hardness and toughness of nanostructured and conventional WC-Co composites

845

Microstructure, hardness, and thermal fatigue behavior of H21 steel processed by laser surface remelting

846

Microstructure, hardness, corrosion resistance and porcelain shear bond strength comparison between cast and hot pressed CoCrMo alloy for metal–ceramic dental restorations

847

Microstructure, hardness, resistivity and thermal stability of sputtered oxide films of AlCoCrCu0.5NiFe high-entropy alloy

848

Microstructure, hydrogen distribution and electrical properties of melt grown high temperature protonic conductors

849

Microstructure, hydrogenation and optical behavior of Mg–Ni multilayer films deposited by magnetron sputtering

850

Microstructure, hysteresis and microwave absorption analysis of Ba(1 − x)SrxFe12O19 ferrite

851

Microstructure, interface and mechanical property of the DS NiAl/Cr(Mo,Hf) composite

852

Microstructure, kinetic, structure, thermodynamic analysis for calcite decomposition: free-surface and powder bed experiments

853

Microstructure, kinetics and mechanisms of nano-crystalline CuFe2O4 reduction in flowing hydrogen at 300–600°C for the production of metallic nano-wires

854

Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6

855

Microstructure, magnetic and electric properties of BaTiO3–Ni0.5Zn0.5Fe1.5Cr0.5O4 nanocomposite

856

Microstructure, magnetic and magneto-transport properties of polycrystalline Fe3O4 films Original Research Article

857

Microstructure, magnetic and mechanical properties of Ni–Zn ferrites prepared by powder injection moulding

858

Microstructure, magnetic and optical properties of sputtered polycrystalline ZnO films with Fe addition

859

Microstructure, magnetic properties and exchange–coupling interactions for one-dimensional hard/soft ferrite nanofibers

860

Microstructure, magnetic properties and their seed layer thickness dependences of granular CoPtCr–SiO2 perpendicular recording media

861

Microstructure, martensitic transformation and anomalies in c′-softening in Co–Ni–Al ferromagnetic shape memory alloys Original Research Article

862

Microstructure, martensitic transformation and properties in the Ni50Mn30Ga16Cu4 ferromagnetic shape memory alloy

863

Microstructure, mechanical and anti-corrosion property evaluation of iron-based thin film metallic glasses

864

Microstructure, mechanical and bio-corrosion properties of Mn-doped Mg–Zn–Ca bulk metallic glass composites

865

Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application

866

Microstructure, mechanical and corrosion properties of Mg–Dy–Gd–Zr alloys for medical applications

867

Microstructure, mechanical and dielectric properties of highly porous silicon nitride ceramics produced by a new water-based freeze casting

868

Microstructure, Mechanical and Electrical Properties of Copper Matrix Composites Reinforced with Steel Nanoparticles

869

Microstructure, mechanical and electrochemical properties evaluation of pulsed DC reactive magnetron sputtered nanostructured Cr–Zr–N and Cr–Zr–Si–N thin films

870

Microstructure, mechanical and fretting wear properties of TiC-stainless steel composites

871

Microstructure, mechanical and shape memory properties of Ti–55Pd–5x (x=Zr, Hf, V, Nb) alloys

872

Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn

873

Microstructure, mechanical and thermal properties of in situ toughened boron carbide-based ceramic composites co-doped with tungsten carbide and pyrolytic carbon

874

Microstructure, mechanical and tribological behavior of MoNx/SiNx multilayer coatings prepared by magnetron sputtering

875

Microstructure, mechanical and tribological behaviors of MoS2-Ti composite coatings deposited by a hybrid HIPIMS method

876

Microstructure, mechanical and tribological properties of a-C/a-C:Ti nanomultilayer film

877

Microstructure, mechanical and tribological properties of Cr1−xAlxN films deposited by pulsed-closed field unbalanced magnetron sputtering (P-CFUBMS)

878

Microstructure, mechanical and tribological properties of Cr–C–N coatings deposited by pulsed closed field unbalanced magnetron sputtering

879

Microstructure, mechanical and tribological properties of CrN/W2N multilayer films deposited by DC magnetron sputtering

880

Microstructure, mechanical and tribological properties of graphite-like amorphous carbon films prepared by unbalanced magnetron sputtering

881

Microstructure, mechanical and tribological properties of microwave sintered calcia-doped zirconia for biomedical applications

882

Microstructure, mechanical and tribological properties of novel multi-component nanolayered nitride coatings

883

Microstructure, mechanical and tribological properties of PACVD Ti(B,N) and TiB2 coatings

884

Microstructure, mechanical and tribological properties of Si and Al co-doped hydrogenated amorphous carbon films deposited at various bias voltages

885

Microstructure, mechanical and tribological properties of TiCN nanocomposite films deposited by DC magnetron sputtering

886

Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium

887

Microstructure, mechanical and wear properties of laser surface melted Ti6Al4V alloy

888

Microstructure, mechanical performance and oxidation mechanism of boride in situ composites

889

Microstructure, mechanical properties and aging behavior of Mg–5Li–3Al–2Zn–xAg

890

Microstructure, mechanical properties and aging behaviors of as-extruded Mg–5Li–3Al–2Zn–1.5Cu alloy

891

Microstructure, mechanical properties and bio-corrosion evaluation of biodegradable AZ91-FA nanocomposites for biomedical applications

892

Microstructure, mechanical properties and bio-corrosion properties of Mg–Si(–Ca, Zn) alloy for biomedical application

893

Microstructure, mechanical properties and bio-corrosion properties of Mg–Zn–Mn–Ca alloy for biomedical application

894

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

895

Microstructure, mechanical properties and corrosion behaviour of dilute Al–Sc–Zr alloy prepared by powder metallurgy

896

Microstructure, mechanical properties and corrosion performance of 7075 Al matrix ceramic particle reinforced composite coatings produced by the cold gas dynamic spraying process

897

Microstructure, mechanical properties and corrosion properties of Mg–Zn–Y alloys with low Zn content

898

Microstructure, mechanical properties and cutting performance of superhard (Ti,Si,Al)N nanocomposite films grown by d.c. reactive magnetron sputtering

899

Microstructure, mechanical properties and cytocompatibility of stable beta Ti–Mo–Ta sintered alloys

900

Microstructure, mechanical properties and damping capacity of heat-treated Mg–Zn–Y–Nd–Zr alloy

901

Microstructure, mechanical properties and electrical conductivity of industrial Cu–0.5%Cr alloy processed by severe plastic deformation

902

Microstructure, mechanical properties and fracture behavior of peak-aged Mg34Y32Nd31Gd alloys under different aging conditions

903

Microstructure, mechanical properties and fracture behavior of ultra-high strength dual-phase steel

904

Microstructure, mechanical properties and high stress abrasive wear behavior of air-cooled MnCrB cast steels

905

Microstructure, mechanical properties and hydrogen induced cracking susceptibility of X80 pipeline steel with reduced Mn content

906

Microstructure, mechanical properties and machining performance of spark plasma sintered Al2O3–ZrO2–TiCN nanocomposites

907

Microstructure, mechanical properties and oxidation behavior of a multiphase (Mo,Cr)(Si,Al)2 intermetallic alloy–SiC composite processed by reaction hot pressing

908

Microstructure, mechanical properties and oxidation behavior of a multiphase (Mo,Cr)(Si,Al)2 intermetallic alloy–SiC composite processed by reaction hot pressing

909

Microstructure, mechanical properties and oxidation behavior of a multiphase (Mo,Cr)(Si,Al)2 intermetallic alloy–SiC composite processed by reaction hot pressing

910

Microstructure, mechanical properties and oxidation behavior of carbon fiber reinforced PyC/C-TaC/PyC layered-structure ceramic matrix composites prepared by chemical vapor infiltration

911

Microstructure, mechanical properties and oxidation behavior of Nb–Si–Al and Nb–Si–N powder compacts prepared by spark plasma sintering

912

Microstructure, mechanical properties and oxidation behavior of the TiAl(Si,Ag) coating on near-α titanium alloy

913

Microstructure, mechanical properties and oxidation resistance of Mo5Si3–Al2O3 composite

914

Microstructure, Mechanical Properties and Oxidation Resistance of Nb-22Ti-14Si-2Hf-2Al-xCr Alloys

915

Microstructure, mechanical properties and reaction mechanism of KD-1 SiCf/SiC composites fabricated by chemical vapor infiltration and vapor silicon infiltration

916

Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds Original Research Article

917

Microstructure, mechanical properties and sintering model of B4C nozzle with micro holes by powder injection molding

918

Microstructure, mechanical properties and stability of nitrided Y-TZP

919

Microstructure, mechanical properties and superelasticity of biomedical porous NiTi alloy prepared by microwave sintering

920

Microstructure, mechanical properties and texture evolution of AZ31 alloy containing trace levels of strontium

921

Microstructure, mechanical properties and thermal shock resistance of hot-pressed ZrO2(3Y)-BN composites

922

Microstructure, mechanical properties and thermal shock resistance of plasma sprayed nanostructured zirconia coatings

923

Microstructure, mechanical properties and thermal shock resistance of zirconium diboride containing silicon carbide ceramic toughened by carbon black

924

Microstructure, mechanical properties and tribological behavior of tribofilm generated from natural serpentine mineral powders as lubricant additive

925

Microstructure, mechanical properties and wear of Ni–Al–Fe alloys

926

Microstructure, mechanical properties and wear of Ni–Al–Fe alloys

927

Microstructure, mechanical properties, and adhesion in IN625 air plasma sprayed coatings

928

Microstructure, mechanical properties, and biological response to functionally graded HA coatings

929

Microstructure, mechanical properties, and blood compatibility of zirconium nitride deposited on nickel–titanium shape memory alloy

930

Microstructure, mechanical properties, and bonding mechanism of ultrasonic-assisted brazed joints of SiC ceramics with ZnAlMg filler metals in air

931

Microstructure, mechanical properties, and corrosion of friction stir welded Al 5456

932

Microstructure, mechanical properties, and cutting performance of TiCxN1 − x coatings with various x values fabricated by moderate temperature chemical vapor deposition

933

Microstructure, mechanical properties, and deformation behavior of Sn–1.0Ag–0.5Cu solder after Ni and Sb additions

934

Microstructure, mechanical properties, and in vitro biocompatibility of spark plasma sintered hydroxyapatite–aluminum oxide–carbon nanotube composite

935

Microstructure, mechanical properties, and oxidation resistance of nanocomposite Ti–Si–N coatings

936

Microstructure, Mechanical Properties, and Residual Stress Distribution of AISI 316L Stainless Steel Part Fabricated by LaserMetal Deposition

937

Microstructure, mechanical properties, and wetting behavior of Si–C–N thin films grown by reactive magnetron sputtering

938

Microstructure, mechanical properties, biocorrosion behavior, and cytotoxicity of as-extruded Mg–Nd–Zn–Zr alloy with different extrusion ratios

939

Microstructure, mechanical properties, biocorrosion behavior, and cytotoxicity of as-extruded Mg–Nd–Zn–Zr alloy with different extrusion ratios

940

Microstructure, mechanical properties, in vitro degradation and cytotoxicity evaluations of Mg–1.5Y–1.2Zn–0.44Zr alloys for biodegradable metallic implants

941

Microstructure, mechanical property and corrosion behavior of interpenetrating (HA + β-TCP)/MgCa composite fabricated by suction casting

942

Microstructure, mechanical property and corrosion behaviors of interpenetrating C/Mg-Zn-Mn composite fabricated by suction casting

943

Microstructure, mechanical property and oxidation property in Ni3Si–Ni3Ti–Ni3Nb multi-phase intermetallic alloys

944

Microstructure, mechanical property and oxidation property in Ni3Si–Ni3Ti–Ni3Nb multi-phase intermetallic alloys

945

Microstructure, mechanical property, bio-corrosion and cytotoxicity evaluations of Mg/HA composites

946

Microstructure, mechanical, and thermal properties of in situ-synthesized (ZrB2+SiC)/Zr2[Al(Si)]4C5 composites

947

Microstructure, mechanical, and thermal properties of the Sn–1Ag–0.5Cu solder alloy bearing Fe for electronics applications

948

Microstructure, mechanical, thermal, and oxidation properties of a Zr2[Al(Si)]4C5–SiC composite prepared by in situ reaction/hot-pressing

949

Microstructure, microchemistry and environmental cracking susceptibility of friction stir welded 2219-T87

950

Microstructure, microhardness and corrosion susceptibility of friction stir welded AlMgSiCu alloy

951

Microstructure, microhardness and dry friction behavior of cold-sprayed tin bronze coatings

952

Microstructure, microhardness and magnetic susceptibility of submicrocrystalline palladium

953

Microstructure, microhardness and wear resistance of VCp/Fe surface composites fabricated in situ

954

Microstructure, micro-mechanical and tribological properties of the nc-WC/a-C nanocomposite coatings magnetron sputtered on non-hardened and oxygen hardened Ti–6Al–4V alloy

955

Microstructure, microstructural stability and mechanical properties of sand-cast Mg–4Al–4RE alloy

956

Microstructure, mineralogy and environmental evaluation of cementitious composites produced with red mud waste

957

Microstructure, nanoindentation, and electrochemical properties of the nanocrystalline nickel film electrodeposited from choline chloride–ethylene glycol

958

Micro-structure, nano-property and nano-tribological behaviour of the permalloy/copper multilayers

959

Microstructure, nickel suppression and mechanical characteristics of electropolished and photoelectrocatalytically oxidized biomedical nickel titanium shape memory alloy

960

Microstructure, nucleation and thermal properties of high-pressure crystallized MWCNT/nylon-6 composites

961

Microstructure, nutrient composition and antioxidant capacity of king palm flour: A new potential source of dietary fibre

962

Microstructure, optical and electrical properties of Al-doped ZnO films grown by MOCVD

963

Microstructure, optical and electrical properties of nitrogen doped sp2-rich a-C thin films grown by facing-target magnetron sputtering

964

Microstructure, Optical, and Dielectric Characterization of Porous Gel Silica Impregnated with PMMA

965

Microstructure, oxidation and H2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique

966

Microstructure, oxidation resistance and high-temperature strength of a new class of 3D open‐cell nickel-based foams

967

Microstructure, oxidation resistance and high-temperature strength of γ′ hardened Pt-base alloys

968

Microstructure, performance and stability of Ni/Al2O3 cermet-supported SOFC operating with coal-based syngas produced using supercritical water

969

Microstructure, permeability and mechanical behaviour of ceramic foams

970

Microstructure, permeability and mechanical behaviour of ceramic foams

971

Microstructure, permeability and rheological behavior of lost foam refractory coatings

972

Microstructure, phase evolution and magnetic properties of melt-spun SmCo6.8−xSnxZr0.2 (x = 0, 0.1 and 0.3) ribbons

973

Microstructure, phase transformation and mechanical property of Ni–Mn–Ga particles/Mg composites

974

Microstructure, phase transformation and wear behavior of Cu–10%Al–4%Fe alloy processed by ECAE

975

Microstructure, physical and mechanical properties of mortar–rubber aggregates mixtures

976

Microstructure, physicochemical properties and in vitro digestibility of starches from different Indian lentil (Lens culinaris) cultivars

977

Microstructure, physicochemical properties and in vitro digestibility of starches from different Indian lentil (Lens culinaris) cultivars

978

Microstructure, physicochemical properties and retrogradation behaviour of Mucuna bean (Mucuna pruriens) starch on heat moisture treatments

979

Microstructure, porosity and mineralogy around fractures in Olkiluoto bedrock

980

Microstructure, porosity and roughness of RF sputtered oxide thin films: Characterization and modelization

981

Microstructure, precipitates and compressive properties of various holmium doped NiAl/Cr(Mo, Hf) eutectic alloys

982

Microstructure, properties and application of YAl2 intermetallic compound as particle reinforcements

983

Microstructure, Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95 Original Research Article

984

Microstructure, properties and oxidation behavior of the glass–ceramic based coating on near-α titanium alloy

985

Microstructure, Raman and optical studies on Cd0.6Zn0.4Te thin films

986

Microstructure, residual stress, and fracture of sputtered TiN films

987

Microstructure, rheology and dewatering behaviour of smectite dispersions during orthokinetic flocculation

988

Microstructure, shape memory effect and mechanical properties of rapidly solidified Co–Ni–Al magnetic shape memory alloys

989

Microstructure, state of water and proton conductivity of sulfonated poly(ether ether ketone)

990

Microstructure, strength and tribological behavior of Fe–C–Cu–Ni sintered steels prepared with MoS2 addition

991

Microstructure, strength, and moisture stability of alkali activated glass powder-based binders

992

Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy

993

Microstructure, surface properties and hydrating behaviour of Mg–C composites prepared by ball milling with benzene

994

Microstructure, temperature estimation and thermal shock resistance of PEO ceramic coatings on aluminum

995

Microstructure, temperature stability and electrical properties of ZnO-modified Pb(Ni1/3Nb2/3)O3–Pb(Fe1/2Nb1/2)O3–Pb(Zr0.3Ti0.7)O3 piezoelectric ceramics

996

Microstructure, tensile and creep properties of as-cast Mg-3.8Zn-2.2Ca-xCe (x=0, 0.5, 1 and 2 wt.%) magnesium alloys

997

Microstructure, tensile and fatigue properties of the Al–10%Si–2%Cu alloy with different Fe and Mn content cast under controlled conditions

998

Microstructure, Tensile and Impact Toughness Properties of Friction Stir Welded Mild Steel Original Research Article

999

Microstructure, tensile and toughness properties after quenching and partitioning treatments of a medium-carbon steel

1000

Microstructure, tensile deformation mode and crevice corrosion resistance in Ti–10Mo–xFe alloys