بر اساس عنوان

1
Numerical model for the computation of permeability of a cemented granular material
2
Numerical model for the dynamics of a coupled fly line/fly rod system and experimental validation
3
Numerical model for the investigation of dual-flow in a spiral counter-current chromatography column
4
Numerical model for the oil pressure distribution in the hydromechanical deep drawing process
5
Numerical model for the performance prediction of a PEM fuel cell. Model results and experimental validation
6
Numerical model for thermoeconomic diagnosis in commercial transcritical/subcritical booster refrigeration systems
7
Numerical model for thin liquid film with evaporation and condensation on solid surfaces in systems with conjugated heat transfer
8
Numerical model for two-bolted joints subjected to compressive loading
9
Numerical model for two-phase solidification problem in a pipe
10
Numerical model for vibration damping resulting from the first-order phase transformations
11
Numerical model of a multi-turn Closed Loop Pulsating Heat Pipe: Effects of the local pressure losses due to meanderings
12
Numerical model of a small-scale liquid-to-air membrane energy exchanger: Parametric study of membrane resistance and air side convective heat transfer coefficient
13
Numerical model of a thermoelectric generator with compact plate-fin heat exchanger for high temperature PEM fuel cell exhaust heat recovery
14
Numerical model of bone remodeling sensitive to loading frequency through a poroelastic behavior and internal fluid movements
15
Numerical Model of Cavitating Propeller Inside of a Tunnel
16
Numerical Model of Cavitating Propeller Inside of a Tunnel
17
Numerical model of CO2 laser welding of thermoplastic polymers
18
Numerical model of ductile fracture kinetics: comparison of results of 2-D simulations to experimental data
19
Numerical model of dust ejection induced by meteoroid impacts
20
Numerical model of electrical potential within the human head
21
Numerical model of evaporative cooling processes in a new type of cooling tower
22
Numerical model of free warm expander pulse tube cooler Original Research Article
23
Numerical model of gaseous fuel jet injection into a fluidized furnace
24
Numerical model of gravity drainage of compressible organic slurries
25
Numerical model of heat flow in back-arc regions
26
Numerical model of internal heat source capacity in desorption step of ETSA process
27
Numerical model of non-isothermal pervaporation in a rectangular channel
28
Numerical model of sprayed air cooled condenser coupled to refrigerating system
29
Numerical model of the dynamic absorption variation in QW-EAM for ultrafast all-optical signal processing
30
Numerical model of the Habanero geothermal reservoir, Australia
31
Numerical model of the hydrothermal system beneath Unzen Volcano, Japan
32
Numerical Model of the Low Temperature Geothermal Area for Direct use in Pohang, South Korea
33
Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material
34
Numerical model of the three-dimensional isothermal flow patterns and mass fluxes in a pitchedroof greenhouse
35
Numerical model of two-phase refrigerant flow distribution in a plate evaporator with distributors
36
Numerical model of vacuum drying of suspensions on continuous drum dryer at two-region conductive-convective heating
37
Numerical model reduction of 2D steady incompressible laminar flows: Application on the flow over a backward-facing step
38
Numerical model simulations of continental shelf flows off northern California
39
Numerical model studies on the generation and dissipation of the diurnal coastal-trapped waves over the Sakhalin shelf in the Sea of Okhotsk
40
NUMERICAL MODEL STUDY OF TIDAL FLUSHING ALONG A NARROW CHANNEL
41
Numerical model to calculate microphysical influences on sound wave propagation in forests
42
Numerical model to predict the position, amount and size of microporosity formation in Al–Cu alloys by dissolved gas and solidification shrinkage
43
Numerical model to predict the position, amount and size of microporosity formation in Al–Cu alloys by dissolved gas and solidification shrinkage
44
Numerical model to study natural convection in a rectangular enclosure filled with two immiscible fluids
45
Numerical model validation and prediction of mist/steam cooling in a 180-degree bend tube
46
Numerical modeling and analysis of temperature modulated differential scanning calorimetry: On the separability of reversing heat flow from non-reversing heat flow
47
Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method
48
Numerical modeling and applications of laser-accelerated ion beams Original Research Article
49
Numerical Modeling and Clinical Evaluation of Pulsed Dye Laser and Copper Vapor Laser in Skin Vascular Lesions Treatment
50
Numerical modeling and comparison study of elliptical cracks effect on the pipes straight and with thickness transition exposed to internal pressure, using XFEM in elastic behavior.
51
Numerical modeling and Computational simulation of the SDE using C++ & FOTRAN 90 : Application in Fisheries management
52
Numerical modeling and design of supercritical CO2 pre-cooler for fusion nuclear reactors
53
NUMERICAL MODELING AND DYNAMIC SIMULATIONS OF NONLINEAR AEROTHERMOELASTIC OF A DOUBLE-WEDGE LIFTING SURFACE
54
Numerical Modeling and Evaluation of a Downwind Pre-Aligned Wind Turbine with an Innovative Blade Geometry Concept
55
Numerical modeling and experimental investigation of gas–liquid slug formation in a microchannel T-junction
56
Numerical modeling and experimental investigation of TiC formation on titanium surface pre-coated by graphite under pulsed laser irradiation
57
Numerical modeling and experimental investigation on the characteristics of molten pool during laser processing
58
Numerical modeling and experimental measurements of a high speed solid-cone water spray for use in fire suppression applications
59
Numerical modeling and experimental measurements of water spray impact and transport over a cylinder
60
Numerical modeling and experimental studies for shape and dimensional control in the curing process of textile composites
61
Numerical Modeling and Experimental Study of Air Flow in theYazdi Wind-Towers
62
Numerical modeling and experimental study of the influence of GDL properties on performance in a PEMFC
63
Numerical modeling and experimental validation of heat transfer and flow resistance on the shell side of a shell-and-tube heat exchanger with flower baffles
64
Numerical modeling and experimental verification of compressible squeeze film pressure
65
Numerical modeling and experimental verification of flow and heat transfer over serrated fins at low Reynolds number
66
Numerical modeling and experiments of coarsening foam
67
Numerical modeling and investigation of gas crossover effects in high temperature proton exchange membrane (PEM) fuel cells
68
NUMERICAL MODELING AND MECHANISM ANALYSIS OF VHF WAVE PROPAGATION IN FORESTED ENVIRONMENTS USING THE EQUIVALENT SLAB MODEL
69
Numerical Modeling and Multi Objective Optimization of Face Milling of AISI 304 Steel
70
Numerical modeling and optimization of bundled fiber optic FTIR probes for spectroscopy of small targets Original Research Article
71
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method
72
Numerical modeling and optimization of vacuum membrane distillation module for low-cost water production Original Research Article
73
Numerical modeling and performance evaluation of multi-tubular sodium alanate hydride finned reactor
74
Numerical Modeling and Simulation in Electromagnetic Transient Program for Estimating Line Backflashover Performance
75
Numerical modeling and simulation of a diffusion-controlled liquid–solid phase change in polycrystalline solids
76
Numerical modeling and simulation of carburized and nitrided quenching process
77
Numerical modeling and simulation of condensation heat transfer of a flue gas in a bundle of transport membrane tubes
78
Numerical Modeling and Simulation of Highly Preheated and Diluted Air Combustion Furnaces
79
Numerical modeling and simulation of pulsatile blood flow in rigid vessel using gradient smoothing method
80
Numerical modeling and simulation of wheel radial fatigue tests
81
Numerical modeling and TGA/FTIR/GCMS investigation of fibrous residue combustion
82
Numerical modeling and theoretical analysis of femtosecond laser tweezers
83
Numerical modeling and uncertainty quantification of a bubbling fluidized bed with immersed horizontal tubes
84
Numerical modeling CO2 injection in a fractured chalk experiment
85
Numerical modeling crack propagation of sheet metal forming based on stress state parameters using XFEM method
86
Numerical modeling edge chipping tests of ceramics
87
Numerical Modeling for Behavioral Analysis of Expansive Soil under Shallow Foundations
88
Numerical modeling for compartment fire environment under a solid-cone water spray
89
Numerical modeling for emergency response of nuclear accident
90
Numerical modeling for emergency response of nuclear accident
91
Numerical Modeling for Fish Diversion Studies
92
Numerical Modeling for Fish Diversion Studies
93
Numerical modeling for LEMP effect evaluation inside a telecommunication exchange
94
Numerical Modeling for Nonlinear Biochemical Reaction Networks
95
Numerical modeling for non-steady thermal stress analysis of slag layer in a membrane wall entrained-flow gasifier
96
Numerical modeling for predicting service life of reinforced concrete structures exposed to chloride environments
97
Numerical modeling for preliminary design of the hydrogen production electrolyzer in the Westinghouse hybrid cycle
98
Numerical modeling for solid–liquid phase change phenomena in porous media: Shell-and-tube type latent heat thermal energy storage
99
Numerical modeling for stratified gas–liquid flow and heat transfer in pipeline
100
Numerical modeling for Thane creek
101
Numerical modeling for the coupled thermo-mechanical processes and spalling phenomena in ؤspِ Pillar Stability Experiment (APSE)
102
Numerical modeling for the localization and the assessment of electromagnetic field sources
103
Numerical modeling groundwater recharge and its implication in water cycles of two interdunal valleys in the Sand Hills of Nebraska
104
Numerical modeling in Chebyshev collocation methods applied to stability analysis of convection problems Original Research Article
105
Numerical modeling methodology and experimental study for piezoelectric vibration damping control of rotating composite fan blades
106
Numerical modeling of 1D transient poroelastic waves in the low-frequency range
107
Numerical Modeling of 26Al-Induced Radioactive Melting of Asteroids Considering Accretion
108
Numerical Modeling of 2-D and 3-D Flows using Artificial Compressibility Method and Collocated Mesh
109
Numerical Modeling of 2-D and 3-D Flows using Artificial Compressibility Method and Collocated Mesh
110
Numerical modeling of 3D halo current path in ITER structures
111
Numerical modeling of 3D turbulent free surface flow in natural waterways
112
Numerical modeling of 3-D turbulent two-phase flow and coal combustion in a pulverized-coal combustor
113
Numerical modeling of a bubbling fluidized bed coal gasifier by kinetic theory of rough spheres
114
Numerical modeling of a CNT–Cu coaxial nanowire in a vacuum to determine the thermal conductivity
115
Numerical modeling of a complex diffuser in a room with displacement ventilation
116
Numerical modeling of a continuous photochemical pollution episode in Hong Kong using WRF–chem
117
Numerical modeling of a DBD in glow mode at atmospheric pressure
118
Numerical Modeling of a Discontinuous Incineration Process with On-line Validation
119
Numerical modeling of a falling bioconvection plume in a porous medium
120
Numerical modeling of a fast-axial-flow CW–CO2 laser
121
Numerical modeling of a fiber optic sensor in its environment for civil engineering applications
122
Numerical modeling of a Global Navigation Satellite System in a general relativistic framework Original Research Article
123
Numerical modeling of a HTS cable
124
Numerical modeling of a human stented trachea under different stent designs
125
Numerical modeling of a hydrothermal system around Waita volcano, Kyushu, Japan, based on resistivity and self-potential survey results
126
Numerical modeling of a long-term in situ chemical osmosis experiment in the Pierre Shale, South Dakota
127
Numerical modeling of a magnetic-boiling based induced pump for thermal energy transport
128
Numerical modeling of a mechano-chemical theory for wound contraction analysis
129
Numerical Modeling of a Metamaterial Biosensor for Cancer Tissues Detection
130
Numerical Modeling of a Nanostructure Gas Sensor Based on Plasmonic Effect
131
Numerical modeling of a new reinforced masonry system subjected to in-plane cyclic loading
132
Numerical modeling of a non-flooding hybrid polymer electrolyte fuel cell
133
Numerical Modeling of a Servohydraulic Testing System for Structures
134
Numerical Modeling of a Turbulent Flow in a Flat Channel with a Fibrous Coating on the Walls
135
Numerical Modeling of a Viscous-Gas Flow in a Turbine Cascade with Air Ejection
136
Numerical modeling of a zeolite/water adsorption cooling system with non-constant condensing pressure
137
Numerical modeling of acoustic emission in laminated tensile test specimens
138
NUMERICAL MODELING OF ACTIVE DEVICES CHARACTERIZED BY MEASURED S-PARAMETERS IN FDTD
139
Numerical modeling of advective transport of saturated deforming sediment beneath the Lake Michigan Lobe, Laurentide Ice Sheet
140
Numerical modeling of an anode-supported SOFC button cell considering anodic surface diffusion
141
Numerical modeling of an electrostatically driven liquid meniscus in the cone–jet mode
142
Numerical modeling of an evaporative spray in a riser
143
Numerical modeling of an InAsSb/InAsSbP double heterojunction light emitting diode for mid-infrared (2–5 μm) applications
144
Numerical Modeling of an Innovative Bipolar Plate Design Based on the Leaf Venation Patterns for PEM Fuel Cells
145
Numerical modeling of an ITER type Cryopump
146
Numerical modeling of an S809 airfoil under dynamic stall, erosion and high reduced frequencies
147
Numerical modeling of armour type and arrangement effects on wave overtopping at rubble mound breakwater
148
Numerical modeling of axial bed-to-wall heat transfer in a circulating fluidized bed combustor
149
Numerical modeling of bacteria facilitated contaminant transport in fractured porous media
150
Numerical modeling of bacteria propelled micromotors Original Research Article
151
Numerical modeling of Basin and Range geothermal systems
152
Numerical Modeling of Basin Irrigation with an Upwind Scheme
153
Numerical Modeling of Bed Evolution in Channel Bends
154
Numerical Modeling of Bed Evolution in Channel Bends
155
Numerical modeling of bed-to-wall heat transfer in a circulating fluidized bed combustor based on cluster energy balance
156
Numerical modeling of behavior of high-energy plasmoid in upper ionosphere Original Research Article
157
Numerical modeling of bending of micropolar plates
158
Numerical modeling of benthic processes in the deep Arabian Sea
159
Numerical modeling of block structure dynamics: dependence of a synthetic earthquake flow on the structure separateness and boundary movements
160
Numerical Modeling of Blood Flow in Irregular Stenosed Artery with the Effects of Gravity
161
Numerical modeling of bubble-driven liquid metal flows with external static magnetic field
162
Numerical modeling of buoyancy-driven turbulent flows in enclosures
163
Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes
164
Numerical modeling of carbonate crust formation at cold vent sites: significance for fluid and methane budgets and chemosynthetic biological communities
165
Numerical modeling of cavitation characteristics and sensitivity curves for reversible hydraulic machinery
166
Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness
167
Numerical Modeling of Cemented Mine Backfill Deposition
168
NUMERICAL MODELING OF CHARRING MATERIAL ABALATION WITH CONSIDERING CHEMICAL REACTION, MASS TRANSFER AND SURFACE HEAT TRANSFER EFFECTS
169
Numerical Modeling of Chemistry and Gas Dynamics During Shock-Induced Ethylene Combustion
170
Numerical Modeling of Circular Footings Subjected to Monotonic Inclined Loading on Uncemented and Cemented Calcareous Sands
171
Numerical Modeling of Coal Tire-Shred Co-Gasification
172
Numerical modeling of co-firing a light density biomass, oat (Avena sativa) hulls, and chunk coal in fluidized bed boiler
173
Numerical modeling of combined corona-electrostatic fields
174
Numerical modeling of combined heat and mass transfer in the adsorbent bed of a zeolite/water cooling system
175
Numerical modeling of combustion and pyrolysis of cellulosic biomass in thermogravimetric systems
176
Numerical modeling of combustion processes induced by a supersonic conical blunt body,
177
Numerical modeling of composite beam to reinforced concrete wall joints: Part I: Calibration of joint components
178
Numerical modeling of composite beam to reinforced concrete wall joints: Part II: Global behavior
179
Numerical modeling of composite laminated cylinders in compression using a novel imperfections modeling method
180
Numerical modeling of compression ignition engine: A review
181
Numerical Modeling of Concrete Confined by Fiber-Reinforced Composites
182
Numerical modeling of contaminated neutral drainage from a waste-rock field test cell
183
Numerical modeling of convection-diffusion phase change problems
184
Numerical modeling of counter-current condensation in a Black Liquor Gasification plant
185
Numerical modeling of coupled fluid flow, heat transport and mechanical deformation: An example from the Chanziping ore district, South China
186
Numerical modeling of coupled heat transfer and phase transformation for solidification of the gray cast iron
187
Numerical Modeling of Coupled Hygromechanical Degradation of Cementitious Materials
188
Numerical modeling of coupled nitrification–denitrification in sediment perfusion cores from the hyporheic zone of the Shingobee River, MN
189
Numerical modeling of coupled variably saturated fluid flow and reactive transport with fast and slow chemical reactions
190
Numerical modeling of crack formation in powder forming processes
191
Numerical modeling of crack growth under dynamic loading conditions
192
Numerical modeling of crenulation cleavage development: A polymineralic approach
193
Numerical modeling of crustal block-and-fault dynamics, earthquakes and slip rates in the Tibet-Himalayan region
194
Numerical modeling of cryogenic chilldown process in terrestrial gravity and microgravity
195
Numerical modeling of crystal growth under strong magnetic fields: An application to the travelling heater method
196
Numerical Modeling of Cyclic Stress-strain Behavior of Sn-Pb Solder Joint During Thermal Fatigue
197
Numerical modeling of dambreak-induced flood and inundation using smoothed particle hydrodynamics
198
Numerical modeling of DC discharges in air flows Original Research Article
199
Numerical modeling of Deep Impact experiment
200
Numerical modeling of deformation and fracture of a multiphase polymer concrete
201
Numerical modeling of deformation and stress fields around a magma chamber: Constraints on failure conditions and rheology
202
Numerical modeling of diazinon transport through inter-row vegetative filter strips
203
Numerical modeling of diffusion induced phase transformations in mechanically stressed lead-free alloys
204
Numerical modeling of discrete multi-crack growth applied to pattern formation in geological brittle media
205
Numerical modeling of double-diffusive convection in ice slurry storage tank
206
Numerical modeling of double-layered piezoelectric transducer systems using a high-order discontinuous Galerkin method
207
Numerical modeling of drag for flow through vegetated domains and porous structures
208
Numerical modeling of dry deposition coupled to 22 photochemical reactions
209
Numerical modeling of dual phase microstructure behavior under deformation conditions on the basis of digital material representation
210
Numerical modeling of ductile crack extension in high pressure pipelines with longitudinal flaws
211
Numerical modeling of dynamic recrystallization during nonisothermal hot compression by cellular automata and finite element analysis
212
Numerical modeling of dynamic recrystallization during nonisothermal hot compression by cellular automata and finite element analysis
213
Numerical modeling of dynamics of steam superheaters
214
Numerical modeling of eastern Tibetan-type margin: Influences of surface processes, lithospheric structure and crustal rheology
215
Numerical modeling of economic uncertainty
216
Numerical modeling of eigenmodes and eigenfrequencies of hetero-junction carbon nanotubes with pentagon–heptagon pair defects
217
Numerical modeling of eigenmodes and eigenfrequencies of single- and multi-walled carbon nanotubes under the influence of atomic defects
218
Numerical modeling of elastic wave propagation and scattering with EFIT — elastodynamic finite integration technique
219
Numerical modeling of elastomeric seismic isolators for determining force–displacement curve from cyclic loading
220
Numerical modeling of electrochemical–mechanical interactions in lithium polymer batteries
221
Numerical Modeling of Electronic and Electrical Characteristics of 0.3 0.7 Al Ga N / GaN Multiple Quantum Well Solar Cells
222
Numerical modeling of electrostatic discharge generators
223
Numerical modeling of elution peak profiles in supercritical fluid chromatography. Part I—Elution of an unretained tracer
224
Numerical modeling of endogenic thermal anomalies on Europa
225
Numerical Modeling of Enhanced Nitrogen Dissolution during Gas Tungsten Arc Welding
226
Numerical modeling of exploitation and reinjection of the Guantao geothermal reservoir in Tanggu District, Tianjin, China
227
Numerical modeling of extensional sedimentary basin formation with MATLAB: Application to the northern margin of the South China Sea
228
Numerical modeling of extreme rogue waves generated by directional energy focusing
229
Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension
230
Numerical modeling of fatigue crack propagation based on the theory of critical distances
231
Numerical modeling of fatigue crack propagation based on the Theory of Critical Distances: Effects of overloads and underloads
232
Numerical modeling of fault rupture propagation through two-layered sands
233
Numerical modeling of field-activated combustion synthesis process of the B4C system
234
Numerical modeling of fine particle and deposit formation in a recovery boiler
235
Numerical modeling of finned heat exchangers
236
Numerical modeling of fires on gas pipelines
237
Numerical modeling of flood waves in a bumpy channel with different boundary conditions
238
Numerical Modeling of Flow Field in Morning Glory Spillways and Determining Rating Curve at Different Flow Rates
239
Numerical modeling of flow field in prismatic compound channels with different floodplain widths
240
Numerical Modeling of Flow in a Vertical Cooling Crystallizer
241
Numerical Modeling of Flow in a Vertical Cooling Crystallizer
242
Numerical modeling of flow processes inside geothermal wells: An approach for predicting production characteristics with uncertainties
243
Numerical modeling of flow structures over various flat-topped stockpiles height: Implications on dust emissions
244
Numerical modeling of flow through an industrial burner orifice
245
Numerical modeling of flows in flotation columns
246
Numerical modeling of fluid and electrical currents through geometries based on synchrotron X-ray tomographic images of reservoir rocks using Avizo and COMSOL
247
Numerical modeling of fluid and particle behaviors in impact pulverizer
248
Numerical modeling of fluid flow and heat transfer in a narrow Taylor–Couette–Poiseuille system
249
Numerical Modeling of Fluid’s Aeration: Analysis of the Power ‎Losses and Lubricant Distribution in Gearboxes
250
Numerical modeling of fluid–particle interactions Original Research Article
251
Numerical modeling of fluid–rock chemical interactions at the supercritical CO2–liquid interface during CO2 injection into a carbonate reservoir, the Dogger aquifer (Paris Basin, France)
252
Numerical modeling of fold initiation at thrust ramps
253
Numerical modeling of forced-convection heat transfer to lead–bismuth eutectic flowing in vertical annuli
254
Numerical modeling of foreland basin formation: a program relating thrusting, flexure, sediment geometry and lithosphere rheology
255
Numerical modeling of formability of extruded magnesium alloy tubes
256
Numerical modeling of formation damage by two-phase particulate transport processes during CO2 injection in deep heterogeneous porous media
257
Numerical modeling of free field vibrations due to pile driving using a dynamic soil-structure interaction formulation
258
Numerical Modeling of Free Overfall
259
Numerical modeling of free surface flow over submerged and highly flexible vegetation
260
Numerical modeling of friction stir welded aluminum joints under high rate loading
261
Numerical modeling of friction stir welding processes
262
Numerical modeling of FRP reinforcements in concrete frames under dynamic loading
263
Numerical Modeling of FRP Shear-Strengthened Reinforced Concrete Beams
264
Numerical modeling of gas hydrate emplacements in oceanic sediments
265
Numerical Modeling of Gas Tubular Distributors in Bubbling Fluidized-Bed Incinerators
266
Numerical modeling of gas-jet wiping process
267
Numerical modeling of gas–particle flow using a comprehensive kinetic theory with turbulence modulation
268
Numerical modeling of gas-particle flows in vertical pipes and the particle collision effect
269
Numerical modeling of glacial erosion and headwall processes in alpine valleys
270
Numerical modeling of glacial sediment production and transport during deglaciation
271
Numerical modeling of gland seal erosion in a geothermal turbine
272
Numerical modeling of gravitational wave sources accelerated by OpenCL Original Research Article
273
Numerical modeling of ground-penetrating radar in 2-D using MATLAB
274
Numerical modeling of guided wave interaction with non-axisymmetric cracks in elastic cylinders
275
Numerical Modeling of Heat and Brine Discharge near Qeshm Desalination Plant
276
Numerical modeling of heat and mass transfer during coffee roasting process Original Research Article
277
Numerical modeling of heat and mass transfer during forced convection drying of rectangular moist objects
278
Numerical modeling of heat and mass transfer in porous medium during combined hot air, infrared and microwaves drying
279
Numerical modeling of heat transfer and fluid flow in rotor–stator cavities with throughflow
280
Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles
281
Numerical modeling of high-temperature shell-and-tube heat exchanger and chemical decomposer for hydrogen production
282
Numerical modeling of humic colloid borne Americium (III) migration in column experiments using the transport/speciation code K1D and the KICAM model
283
Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model
284
Numerical modeling of hydraulic fracturing in carbonate rocks of Bangestan reservoir
285
Numerical Modeling of Hydraulic Fracturing in Oil Sands
286
Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir
287
Numerical modeling of hydrodynamics and sediment transport in lower Mississippi at a proposed delta building diversion
288
Numerical modeling of hydrogen absorption measurements in Ni-catalyzed Mg
289
Numerical modeling of hydrogen permeation in chemical potential gradients
290
Numerical modeling of hydrogen production from ammonia decomposition for fuel cell applications
291
Numerical modeling of hyperpycnal flows in an idealized river mouth
292
Numerical modeling of hyperpycnal plume
293
Numerical modeling of hypervelocity impacts
294
Numerical modeling of ice behavior under high velocity impacts
295
Numerical modeling of ice behavior under high velocity impacts
296
Numerical modeling of ice loads on an icebreaking tanker: Comparing simulations with model tests
297
Numerical modeling of impact-damaged sandwich composites subjected to compression-after-impact loading
298
Numerical modeling of impact-induced modifications of the deep-sea floor
299
Numerical modeling of in situ gelation of biopolymers in porous media
300
Numerical modeling of inconel 738LC deposition welding: Prediction of residual stress induced cracking
301
Numerical modeling of indoor environment with a ceiling fan and an upper-room ultraviolet germicidal irradiation system
302
Numerical Modeling of Inhaled Charged Aerosol Deposition in Human Airways
303
Numerical modeling of inhomogeneous orographic wave influence on planetary waves in the middle atmosphere Original Research Article
304
Numerical modeling of injection and mineral trapping of CO2 with H2S and SO2 in a sandstone formation
305
Numerical modeling of interactions between a macro-crack and a cluster of micro-defects
306
Numerical Modeling of Interactions between Solitary Waves and Floating Breakwaters
307
Numerical modeling of interstitial diffusion in binary systems. Application to iron nitriding
308
Numerical modeling of interstitial diffusion in binary systems. Application to iron nitriding
309
Numerical modeling of ionian volcanic plumes with entrained particulates
310
Numerical modeling of iron corrosion due to an acidic aqueous solution Original Research Article
311
Numerical modeling of isolated n-alkane droplet flames: initial comparisons with ground and space-based microgravity experiments
312
Numerical modeling of jet hydrodynamics, mass transfer, and crystallization kinetics in the supercritical antisolvent (SAS) process
313
Numerical modeling of laminar annular film condensation for different channel shapes
314
Numerical modeling of laminar-turbulent transition in a boundary layer at a high freestream turbulence level
315
Numerical modeling of large-scale bubble plumes accounting for mass transfer effects
316
Numerical modeling of laser assisted machining of a beta titanium alloy
317
Numerical modeling of laser induced phase transitions in silicon
318
Numerical modeling of laser shock peening with femtosecond laser pulses and comparisons to experiments
319
Numerical modeling of laser stabilization by regenerative spectral hole burning
320
Numerical modeling of laser tunneling ionization in explicit particle-in-cell codes
321
Numerical modeling of lean duplex stainless steel hollow columns of square, L-, T-, and +-shaped cross sections under pure axial compression
322
Numerical modeling of LiDAR-based geological model for landslide analysis
323
Numerical modeling of links behavior in eccentric bracings with dual vertical links
324
Numerical modeling of liquid water motion in a polymer electrolyte fuel cell
325
Numerical modeling of liquid water movement through layered snow based on new measurements of the water retention curve
326
Numerical modeling of lithium ion battery for predicting thermal behavior in a cylindrical cell
327
Numerical Modeling of Local Scour at the Junction of Open Channels in Flow3D Numerical Model
328
Numerical modeling of long waves in shallow water using LRBF-DQ and hybrid DQ/LRBF-DQ
329
Numerical modeling of macrodispersion in heterogeneous media: a comparison of multi-Gaussian and non-multi-Gaussian models
330
Numerical Modeling of Macrosegregation During the Direct-Chill Casting of an Al Alloy Billet
331
Numerical modeling of magnetoelectric effect in a novel composite structure
332
Numerical modeling of major element distribution between chromian spinel and basaltic melt, with application to chromian spinel in MORBs
333
Numerical modeling of masonry wall under underground waves
334
Numerical modeling of masonry-infilled RC frames subjected to seismic loads
335
Numerical modeling of mass transfer in the supercritical antisolvent process
336
Numerical modeling of mass transfer in the supercritical antisolvent process: miscible conditions
337
Numerical modeling of materials processing systems
338
Numerical modeling of MHD interaction in the boundary layer of hypersonic flows
339
Numerical modeling of MHD stability in a cylindrical configuration
340
Numerical modeling of micro- and macro-behavior of viscoelastic porous materials
341
Numerical Modeling of Micromixing Performance of Five Generic Microchannel Reactors using Villermaux/Dushman Competing Test Reaction
342
Numerical modeling of microwave induced natural convection
343
Numerical modeling of minor gas constituents and aerosols in the atmosphere
344
Numerical modeling of minor gas constituents and aerosols in the atmosphere
345
Numerical modeling of mold filling and curing in non-isothermal RTM process
346
Numerical modeling of momentumless turbulent wake dynamics in a linearly stratified medium
347
Numerical modeling of multi-stage tube hydropiercing
348
Numerical modeling of nanostructured materials
349
Numerical modeling of natural convection in an open cavity with two vertical thin heat sources subjected to a nanofluid
350
Numerical modeling of natural convection in partially open square cavities under electric field
351
Numerical modeling of negative-corona discharge in oxygen under different pressures
352
Numerical Modeling of NO Formation in Laminar Bunsen Flames—A Flamelet Approach
353
Numerical modeling of non-Darcy flow in near-well region of a geothermal reservoir
354
Numerical Modeling of Non-equilibrium Plasma Discharge of Hydrogenated Silicon Nitride (SiH4/NH3/H2)
355
Numerical modeling of non-isothermal quartz dissolution/precipitation in a coupled fracture–matrix system
356
Numerical modeling of nonlinear acoustic waves in a tube connected with Helmholtz resonators
357
Numerical modeling of nonlinear deformation and buckling of composite plate-shell structures under pulsed loading
358
Numerical modeling of nonlinearity, plasticity and damage in CFRP-woven composites for crash simulations
359
Numerical modeling of NOx reduction using pyrolysis products from biomass-based materials
360
Numerical modeling of ocean swell contributions to the global wind-wave climate
361
Numerical Modeling of Oil Slick Spread in the Persian Gulf
362
Numerical modeling of optical coherent transient processes with complex configurations—I. Angled beam geometry
363
Numerical modeling of optical coherent transient processes with complex configurations—II. Angled beams with arbitrary phase modulations
364
Numerical modeling of optical coherent transient processes with complex configurations—III: Noisy laser source
365
Numerical Modeling of Optical Gradient Traps Using the Vector Finite Element Method
366
Numerical modeling of oxygen diffusion in the wall thickness of Low-Tin Zircaloy-4 fuel cladding tube during high temperature (1100–1250 °C) steam oxidation
367
Numerical modeling of oxygen exclusion experiments of anaerobic bioventing
368
Numerical modeling of oxygen mass transfer from PbO spheres packed bed to liquid lead bismuth eutectic: A venturi-type PbO mass exchanger
369
Numerical modeling of particle fluidization behavior in a rotating fluidized bed
370
Numerical modeling of particle generation from ozone reactions with human-worn clothing in indoor environments
371
Numerical Modeling of Particle Heating and Diffusion
372
Numerical modeling of particles deposition in domestic floor heating systems
373
Numerical modeling of passive scalar dispersion in an urban canopy layer
374
Numerical modeling of perturbation propagation in a supersonic boundary layer
375
Numerical modeling of petroleum fluids under microwave irradiation for improved horizontal well performance
376
NUMERICAL MODELING OF PILE DRIVING
377
NUMERICAL MODELING OF PILE DRIVING
378
Numerical Modeling of Pipe–Soil Interaction under Oblique Loading
379
Numerical Modeling of Pollutant Dispersion and Oil Spreading by the Stochastic Discrete Particles Method
380
Numerical modeling of pore-scale phenomena during CO2 sequestration in oceanic sediments
381
Numerical modeling of powder metallurgy processes
382
Numerical modeling of preseismic slow movements of crustal blocks caused by quasi-horizontal tectonic forces
383
Numerical modeling of primary thoracic trauma because of blast
384
Numerical modeling of progressive damage in fiber reinforced plastic cross-ply laminates
385
Numerical modeling of propagation and overlap of thrust faults, with application to the thrust-fold belt of central Alberta
386
Numerical modeling of propagation of breaking nonlinear acoustic-gravity waves from the lower to the upper atmosphere Original Research Article
387
Numerical modeling of protocore destabilization during planetary accretion: Methodology and results
388
Numerical modeling of pulse combustor tail pipe heat transfer
389
Numerical modeling of pulsed laser evaporation of aluminum targets
390
NUMERICAL MODELING OF RAILWAY TRACK SUPPORTING SYSTEM USING FINITE-INFINITE AND THIN LAYER ELEMENTS
391
Numerical modeling of rate-dependent debonding processes in composites
392
Numerical modeling of reinforced concrete columns strengthened with composite materials
393
Numerical modeling of response of monolithic and bilayer plates to impulsive loads
394
Numerical modeling of reverse fault rupture propagation through clayey embankments
395
Numerical modeling of rigid media evaporative cooler
396
Numerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure
397
Numerical Modeling of Roof Force in Concrete Liquid Storage Tanks.
398
Numerical Modeling of Saline Gravity Currents Using EARSM and Buoyant k-ETurbulence Closures
399
numerical modeling of sand particle erosion at return bends in gas-particle two-phase flow
400
Numerical modeling of sand particle erosion at return bends in gas-particle two-phase flow
401
Numerical modeling of scanning laser-induced melting, vaporization and resolidification in metals subjected to step heat flux input
402
Numerical modeling of scanning laser-induced melting, vaporization and resolidification in metals subjected to time-dependent heat flux inputs
403
Numerical modeling of sealing curtain design performance in earthdams implemented on layered soils (Case study: Abbasabad dam)
404
Numerical modeling of sediment transport patterns under the effects of waves and tidal currents at Pars port complex inlet
405
Numerical Modeling of Sediment-flow around Obstacle Inspired by Marine Sponges: Considering Body Configurations
406
Numerical modeling of seepage-induced sand production in oil and gas reservoirs
407
Numerical modeling of self-limiting and self-enhancing caprock alteration induced by CO2 storage in a depleted gas reservoir
408
Numerical modeling of self-pierce riveting—From riveting process modeling down to structural analysis
409
Numerical modeling of serpentine microchannel condensers
410
Numerical modeling of severe convective storms occurring in the Carpathian Basin
411
Numerical modeling of shock-to-detonation transition in energetic materials
412
Numerical modeling of shock-wave instability in thermodynamically nonideal media
413
Numerical modeling of short pulse laser interaction with Au nanoparticle surrounded by water
414
Numerical modeling of silicon oxide particle formation and transport in a one-dimensional low-pressure chemical vapor deposition reactor
415
Numerical modeling of simulated blood flow in idealized composite arterial coronary grafts: Steady state simulations
416
Numerical modeling of slinky-coil horizontal ground heat exchangers
417
Numerical modeling of slope flows entraining bottom material
418
Numerical modeling of slug flow initiation in a horizontal channels using a two-fluid model
419
Numerical modeling of SOFCs operating on biogas from biodigesters
420
Numerical modeling of softening hinges in thin Euler–Bernoulli beams
421
Numerical Modeling of Soil-Pile-Interaction with Near and Far Field Earthquake s Effects
422
Numerical modeling of solid state sintering using heterogeneous packing and diffusion processes
423
Numerical modeling of solute dispersion through vertical well and aquifer under oscillating pressure
424
Numerical modeling of sooting tendencies in a laminar co-flow diffusion flame
425
Numerical modeling of spatially-variable precipitation and passive margin escarpment evolution
426
Numerical modeling of startup and shutdown transients in reciprocating compressors
427
Numerical modeling of steam injection in heavy oil reservoirs
428
Numerical modeling of straw combustion in a fixed bed
429
Numerical modeling of stress and strain associated with the bending of an oil pipeline by a migrating pingo in the permafrost region of the northern Tibetan Plateau
430
Numerical modeling of stress build up during nickel silicidation under anisothermal annealing
431
Numerical modeling of stress induced martensitic phase transformations in shape memory alloys
432
Numerical modeling of stress–strain behavior of sand under cyclic loading
433
Numerical modeling of structural transitions in few-particle confined 2D systems Original Research Article
434
Numerical modeling of subgrain growth of hot extruded Al–4.5Zn–1Mg alloy in the presence of nanosized dispersoids
435
Numerical modeling of submarine mass-movement generated waves using RANS model
436
Numerical modeling of substrate effect on determination of elastic and plastic properties of TiN nanocoating in nanoindentation test
437
Numerical modeling of sub-surface initiated spalling in rolling contacts
438
Numerical Modeling of Surface and Near Bottom Currents in the Bushehr Bay
439
Numerical modeling of surface deformations on Mt. Vesuvius volcano (Italy) in presence of asymmmetric elastic heterogeneities
440
Numerical modeling of surface runoff and erosion due to moving rainstorms at the drainage basin scale
441
Numerical modeling of tensile fracture initiation and propagation in snow slabs using nonlocal damage mechanics
442
Numerical modeling of the Amazon River plume
443
Numerical Modeling of the Amount and Rate of Sand Produced in Oil Wells
444
Numerical modeling of the behavior of overlaid slab panels for reinforced concrete bridge decks
445
Numerical modeling of the benzene reaction with ozone in gas phase using differential neural networks
446
Numerical modeling of the carbonization process in the manufacture of carbon/carbon composites Original Research Article
447
Numerical Modeling of the Cavitation Flow in Throttle Geometry
448
Numerical modeling of the Cenozoic geomorphic evolution of the southern Sierra Nevada, California
449
Numerical modeling of the central Black Sea ecosystem functioning during the eutrophication phase
450
Numerical modeling of the coastal circulation off northern Baja California and southern California
451
Numerical modeling of the combustion of densified wood under fixed-bed conditions
452
NUMERICAL MODELING OF THE COMBUSTION SYNTHESIS OF TiAl/Al2O3 COMPOSITE VIAMICROWAVE HEATING
453
Numerical Modeling of the Compression Process of Elastic Open-cell Foams
454
Numerical modeling of the constant flux spectra for surface gravity waves in a case of angular anisotropy
455
Numerical modeling of the coupling of an ICRH antenna with a plasma with self-consistent antenna currents Original Research Article
456
Numerical modeling of the damage evolution in an aluminum alloy reinforced bidirectionally by ceramic fibers
457
Numerical Modeling of the Development of a Streaky Structure in a Boundary Layer at a High Freestream Turbulence Level
458
Numerical modeling of the development of small-scale magmatic emulsions by Korteweg stress driven flow
459
Numerical modeling of the Disk Pressure Test up to failure under gaseous hydrogen
460
Numerical modeling of the disturbances of the separated flow in a rounded compression corner
461
Numerical modeling of the double punch test for plain concrete
462
Numerical Modeling of the Dynamics of a Slow Z-Pinch
463
Numerical modeling of the edge rounding of brittle materials by vibratory finishing
464
Numerical Modeling of the Effect of Geocell Elements’ Dimensions on Behavior of Circular Footings
465
Numerical modeling of the effect of geometric asymmetry on the damping aerodynamic characteristics of supersonic sectional flight vehicles
466
Numerical modeling of the effect of heat and mass transfer in porous low-temperature heat insulation in composite material structures on the magnitude of stresses which develop
467
Numerical modeling of the effect of histidine protonation on pH distribution and DNA hybridization in electronically active microarrays
468
Numerical modeling of the effect of number of electrodes on natural convection in an EHD fluid
469
Numerical modeling of the effects of changing injection duration in double injection strategies in a DI diesel engine
470
Numerical Modeling of the Effects of Channel Configurations and Inclination Angles Inducing Buoyancy on Reverse Osmosis
471
Numerical Modeling of the Effects of Channel Configurations and Inclination Angles Inducing Buoyancy on Reverse Osmosis
472
Numerical modeling of the effects of joint hydraulic aperture, orientation and spacing on rock grouting using UDEC: A case study of Bakhtiary Dam of Iran
473
Numerical modeling of the effects of oil on annular laminar film condensation in minichannels
474
Numerical modeling of the effects of rebar presence and/or multilayered concrete resistivity on the apparent resistivity measured via the Wenner method
475
Numerical modeling of the effects of water flow, sediment transport and vegetation growth on the spatiotemporal patterning of the ridge and slough landscape of the Everglades wetland
476
Numerical modeling of the elastic behavior of fiber-reinforced composites with inhomogeneous interphases
477
Numerical modeling of the electrohydrodynamic effect to natural convection in vertical channels
478
Numerical modeling of the elution peak profiles of retained solutes in supercritical fluid chromatography
479
Numerical modeling of the evolution of two-phase zones under a fractured caprock Original Research Article
480
Numerical modeling of the exterior-to-interior transmission of impulsive sound through three-dimensional, thin-walled elastic structures
481
Numerical modeling of the flow conditions in a closed-circuit low-speed wind tunnel
482
Numerical modeling of the formation of aerosol particles in jet engine plumes
483
Numerical Modeling of the Formation of Steady-State Nonequilibrium Distributions of Particles Interacting through a PowerLaw Potential
484
Numerical modeling of the fracture process in a three-unit all-ceramic fixed partial denture
485
Numerical modeling of the gasification based biomass co-firing in a 600 MW pulverized coal boiler
486
Numerical modeling of the geometrical defects of an origami-like sandwich core
487
Numerical modeling of the impact behavior of new particulate-loaded composite materials
488
NUMERICAL MODELING OF THE IMPACT OF OILFIELD EFFLUENT DISPOSAL PITS ON THE GROUNDWATER IN KUWAIT
489
Numerical modeling of the impact of projectiles on metal structures
490
Numerical modeling of the impact of regenerator housing on the determination of Nusselt numbers
491
Numerical modeling of the induced vorticity effect on the von Kàrmàn vortex street downstream of a circular cylinder
492
Numerical modeling of the interaction of gaseous species with aerosol and cloud particles
493
Numerical modeling of the KdV random wave field
494
Numerical modeling of the mixing flow of second-order fluids with helical ribbon impellers Original Research Article
495
Numerical modeling of the Momotombo geothermal system, Nicaragua
496
Numerical modeling of the motion of deformable ellipsoidal objects in slow viscous flows
497
Numerical modeling of the motion of rigid ellipsoidal objects in slow viscous flows: A new approach
498
Numerical modeling of the multi-stage sheet pair hydroforming process
499
Numerical modeling of the Novosibirsk terahertz FEL and comparison with experimental results
500
Numerical modeling of the Novosibirsk terahertz FEL and comparison with experimental results
501
Numerical Modeling of the Observed Wiechert Seismograph Magnification
502
Numerical modeling of the Patos Lagoon coastal plume, Brazil
503
Numerical modeling of the performance of differential mobility analyzers for nanometer aerosol measurements
504
Numerical modeling of the photoionization of Rydberg atoms by the field of an electromagnetic wave
505
Numerical modeling of the productivity of vertical to shallowly dipping fractured zones in crystalline rocks
506
Numerical modeling of the propagation of ultrasonic waves in AISI 316L welds made by SMAW and GTAW processes
507
Numerical modeling of the pulsar wind interaction with ISM Original Research Article
508
Numerical modeling of the receptivity of a supersonic boundary layer to acoustic disturbances
509
Numerical modeling of the response of alluvial rivers to Quaternary climate change
510
Numerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect
511
Numerical Modeling of the Solar Tachocline. II. Forced Turbulence with Imposed Shear
512
Numerical modeling of the solar wind interaction with Venus
513
Numerical modeling of the stabilization of a supersonic flat-plate boundary layer by a porous coating
514
Numerical Modeling of the Stepped Planing Hull in Calm Water
515
Numerical modeling of the superconducting flux flow transistor with a nanobridge
516
Numerical modeling of the temporal response of back-gated metalsemiconductor- metal photodetector in an equilibrium condition
517
Numerical modeling of the thermal behavior during the LENS® process
518
Numerical modeling of the thermal behavior of a direct solar dryer with auxiliary heating system
519
Numerical modeling of the thermal force in a plasma for test-ion transport simulation based on a Monte Carlo Binary Collision Model (II) – Thermal forces due to temperature gradients parallel and perpendicular to the magnetic field
520
Numerical modeling of the thermomechanical behavior of a large-scale underground experiment
521
Numerical modeling of the thermo-mechanical behavior of particle reinforced metal matrix composites in laser forming by using a multi-particle cell model
522
Numerical modeling of the trajectories of plastic granules in a tribo-aero-electrostatic separator
523
Numerical modeling of the transient hydrogeological response produced by tunnel construction in fractured bedrocks
524
Numerical modeling of the transmission dynamics of drug-sensitive and drug-resistant HSV-2
525
Numerical modeling of the turbulent viscous-gas flow past a cylinder with a circular vortex cell in the presence of suction from the central body surface
526
Numerical modeling of the vacuum membrane distillation process Original Research Article
527
Numerical modeling of the vortex breakdown phenomenon on a delta wing with trailing-edge jet-flap
528
Numerical modeling of thermal force in a plasma for test-ion transport simulation based on Monte Carlo Binary Collision Model
529
Numerical modeling of thermal structure, circulation of H2O, and magmatism–metamorphism in subduction zones: Implications for evolution of arcs
530
Numerical modeling of thermally-stimulated currents for the density-of-states determination in thin-film semiconductors
531
NUMERICAL MODELING OF THERMOCAPILLARY DEFORMATIONS IN LOCALLY HEATED LIQUID LAYER
532
Numerical modeling of thermocapillary two-phase flows with evaporation using a two-scalar approach for heat transfer
533
Numerical modeling of three-dimensional shear flow in a cavity with moving lids
534
Numerical modeling of three-dimensional two-phase gas–liquid flow in the flow field plate of a PEM electrolysis cell
535
Numerical modeling of three-phase flow through a Venturi meter using the LSSVM algorithm
536
Numerical modeling of tides in the Great Bay Estuarine System: dynamical balance and spring–neap residual modulation
537
Numerical modeling of transient Basin and Range extensional geothermal systems
538
Numerical Modeling of Transient Seismic Fields in Viscoelastic Media Based on the Laguerre Spectral Method
539
Numerical Modeling of Transient Turbulent Gas Flow in a Pipe Following a Rupture
540
Numerical modeling of transient two-dimensional viscoelastic waves
541
Numerical modeling of transport and accumulation of DNA on electronically active biochips
542
Numerical modeling of transport barrier formation
543
Numerical modeling of transport of gas- and aerosol-phase persistent organic pollutants in the Northern hemisphere
544
Numerical modeling of transport phenomena in reinforced concrete exposed to elevated temperatures
545
Numerical Modeling of Tsunami Waves Associated With Worst Earthquake Scenarios of the Makran Subduction Zone in the Jask Port, Iran
546
Numerical modeling of tunable optofluidics lens based on combined effect of hydrodynamics and electroosmosis
547
Numerical modeling of Tunguska-like impacts
548
Numerical modeling of turbulent flow in curved channels of compound cross-section
549
Numerical modeling of turbulent jet diffusion flames in the atmospheric surface layer
550
Numerical Modeling of Turbulent Processes in outflow of the Persian Gulf
551
Numerical modeling of two-dimensional sea spray icing on vessel-mounted cylinders
552
NUMERICAL MODELING OF TWO-LAYERED MICROPOLAR FLUID THROUGH AN NORMAL AND STENOSED ARTERY
553
Numerical modeling of two-phase flow in heterogeneous permeable media with different capillarity pressures
554
Numerical Modeling of Two-Phase Hydromagnetic Flow and Heat Transfer in a Particle-Suspension through a non-Darcian Porous Channel
555
Numerical modeling of two-phase refrigerant flow through adiabatic capillary tubes
556
Numerical modeling of two-phase supersonic ejectors for work-recovery applications
557
Numerical modeling of two-phase transonic flow Original Research Article
558
Numerical modeling of ultrashort-pulse laser ablation of silicon
559
Numerical modeling of underwater acoustic wave using Differential Quadrature Method
560
Numerical modeling of unidirectional stratified flow with and without phase change
561
Numerical modeling of unsteady flow in steam turbine stage
562
Numerical Modeling of Unsteady Two-Dimensional Convection in a Finite-Length Horizontal Layer Heated from Below
563
Numerical modeling of urban sound fields by a diffusion process
564
Numerical modeling of viscoelastic flows using equal low-order finite elements
565
Numerical Modeling of Wave and Current Patterns of Beris Port in East of Chabahar-Iran
566
Numerical modeling of wave breaking induced by fixed or moving boundaries
567
Numerical modeling of wave propagation in functionally graded materials using time-domain spectral Chebyshev elements
568
Numerical modeling of wave run-up along columns of semi-submersible platforms
569
Numerical Modeling of Wind Distribution Around a Tall Building in a 3D Urban Environment
570
Numerical modeling of wind waves generated by tropical cyclones using moving grids
571
NUMERICAL MODELING OF ZnxCd1-xS/ZnxCd1-xTe SOLAR CELLS BY AMPS-1D
572
Numerical modeling on a diesel engine fueled by biodiesel–methanol blends
573
Numerical Modeling on Anodic Chronopotentiometric Transients for the Electrochemical Sensing of Methyl Salicylate
574
Numerical modeling on the discharged fluid flow from a glass melter by a Lagrangian approach
575
Numerical modeling on transition of dominant algae in Lake Kitaura, Japan
576
Numerical modeling on transition of dominant algae in Lake Kitaura, Japan
577
Numerical modeling study of sediment dispersal by a river plume
578
Numerical modeling the bonding mechanism of HVOF sprayed particles
579
Numerical modeling the effects of overloading and underloading in fatigue crack growth
580
Numerical modeling to evaluate the effect of soil liquefaction on the bearing capacity of piles
581
Numerical modeling with application to tracking marine debris
582
Numerical modelization of disordered media via fractional calculus
583
Numerical modelling and a design of a thermoelectric dehumidifier
584
Numerical modelling and analysis of temperature controlled density currents in Tomales Bay, California
585
Numerical modelling and analysis of the blast performance of laminated glass panels and the influence of material parameters
586
Numerical modelling and experimental approach for surface morphology evaluation during ultrasonic shot peening
587
Numerical modelling and experimental investigation of the fluid flow and contaminant dispersion in a channel
588
Numerical modelling and experimental studies of thermal behaviour of building integrated thermal energy storage unit in a form of a ceiling panel
589
Numerical Modelling and Experimental Validation of a Cold StoreAmbient Factors
590
Numerical modelling and experimental validation of a low concentrating photovoltaic system
591
Numerical modelling and experimental validation of a planar type pre-reformer in SOFC technology
592
Numerical modelling and experimental validation of dynamic fracture events along weak planes Original Research Article
593
Numerical modelling and experimental validation of steel deep drawing processes: Part I. Material characterization
594
Numerical modelling and experimental validation of steel deep drawing processes: Part II: Applications
595
NUMERICAL MODELLING AND EXPERIMENTAL VERIFICATION OF AIRBAG FOR PACKAGING MATERIAL APPLICATION
596
Numerical modelling and graph theory tools to study ecological connectivity in the Great Barrier Reef
597
Numerical modelling and graph theory tools to study ecological connectivity in the Great Barrier Reef
598
Numerical modelling and homogenized constitutive law of large deforming fluid saturated heterogeneous solids
599
Numerical Modelling and Industrial Verification of Ethylene Dichloride Cracking Furnace
600
Numerical modelling and investigation of plywood progressive failure in CT tests
601
Numerical modelling and nanoindentation experiment to study the brazed residual stresses in an X-type lattice truss sandwich structure
602
Numerical modelling and simulation in sheet metal forming
603
Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r
604
Numerical modelling as a tool for optimisation of sub-slab depressurisation systems design
605
Numerical modelling crack propagation under Mode II fracture in plain concretes containing siliceous fly-ash additive using XFEM method
606
Numerical modelling for crushed rock layer thickness of highway embankments in permafrost regions of the Qinghai–Tibet Plateau
607
Numerical modelling for design and evaluation of groundwater remediation schemes
608
Numerical modelling for design and evaluation of groundwater remediation schemes
609
Numerical modelling for prediction of ductile fracture of bolted structure under tension shear loading
610
Numerical modelling for temperature distribution in steel bridges
611
Numerical modelling for the hardness evaluation of friction stir welded copper metals
612
Numerical modelling in biosciences using delay differential equations
613
Numerical modelling in building reliability using both a probabilistic approach and a delay differential model
614
Numerical modelling in wave energy conversion systems
615
Numerical modelling of 3D woven preform deformations
616
NUMERICAL MODELLING OF A 3D RAIL RCF ʹSQUATʹ-TYPE CRACK UNDER OPERATING LOAD
617
Numerical modelling of a fixed bed updraft long stick wood gasifier
618
Numerical Modelling of a Landslide-generated Tsunami: The 1979 Nice Event
619
Numerical modelling of a mantle plume: the plume head–lithosphere interaction in the formation of an oceanic large igneous province
620
Numerical modelling of a multi-stage solar still
621
Numerical Modelling of a Shaking Table Test for Soil-Foundation-Superstructure Interaction by Means of a Soil Constitutive Model Implemented in a FEM Code
622
Numerical modelling of a straw-fired grate boiler
623
Numerical modelling of a supercritical water oxidation reactor containing a hydrothermal flame
624
Numerical modelling of a transient conductive–radiative thermal problem arising in silicon purification
625
Numerical Modelling of a Turbocharger Splitter-Vaned Centrifugal Impeller at off-Design Conditions Part II:Computation of Forces and Torques
626
Numerical Modelling of a Turbocharger Splitter-Vaned Centrifugal Impeller at off-Design Conditions, Part I: Impeller Flow Field
627
Numerical modelling of airflow over an idealised transverse dune
628
Numerical modelling of alluvial rivers subject to interactive sediment mining and feeding
629
Numerical modelling of aluminium sheets formability using response surface methodology
630
Numerical modelling of an industrial steam–air sterilisation process with experimental validation
631
Numerical modelling of an oil spill in the northern Adriatic
632
Numerical modelling of anchor bolts under pullout and relaxation tests
633
Numerical modelling of armour block sea breakwater with smoothed particle hydrodynamics
634
Numerical modelling of asymmetric boudinage
635
Numerical Modelling of Backfill Grouting Approaches in EPB Tunneling
636
Numerical modelling of barotropic tidal dynamics in the strait of Messina
637
NUMERICAL MODELLING OF BED LOAD SEDIMENT TRAPS IN SEWER SYSTEMS BY DENSITY CURRENTS
638
NUMERICAL MODELLING OF BED LOAD SEDIMENT TRAPS IN SEWER SYSTEMS BY DENSITY CURRENTS
639
Numerical modelling of behaviour of reinforced concrete columns in fire and comparison with Eurocode 2
640
Numerical modelling of biostabilisation for a coal mine overburden dump slope
641
Numerical modelling of biostabilisation for a coal mine overburden dump slope
642
Numerical Modelling of Block-structure Dynamics: Application to the Vrancea Region
643
Numerical modelling of blue mussel (Mytilus edulis) bacterial contamination
644
Numerical modelling of boiling heat transfer in microchannels
645
Numerical modelling of bond behaviour in RC structures affected by reinforcement corrosion
646
Numerical modelling of bond behaviour in RC structures affected by reinforcement corrosion
647
Numerical modelling of Bose–Einstein correlations
648
Numerical modelling of bubbly flows with and without heat and mass transfer
649
Numerical modelling of burial and temperature history as an approach for an alternative interpretation of the Bramsche anomaly, Lower Saxony Basin
650
Numerical modelling of changes of edge plasma transport due to the presence of TEXTOR-DED
651
Numerical modelling of chemical effects of magma solidification problems in porous rocks
652
Numerical modelling of chloride propagation in the quaternary aquifer of the southern Upper Rhine Graben
653
Numerical modelling of clast rotation during soft-sediment deformation: a case study in Miocene delta deposits
654
Numerical modelling of coastal seiches in Malta
655
Numerical modelling of cohesive sediments transport in the Ria de Aveiro lagoon, Portugal
656
Numerical modelling of colloid transport in sets of parallel fractures with fracture skin
657
Numerical modelling of combined heat transfers in a double skin façade – Full-scale laboratory experiment validation
658
Numerical modelling of combined roughness and plasticity induced crack closure effects in fatigue
659
Numerical modelling of combined roughness and plasticity induced crack closure effects in fatigue
660
Numerical modelling of combustion in a zinc flash smelter
661
Numerical modelling of concrete curing, regarding hydration and temperature phenomena
662
NUMERICAL MODELLING OF CONDUCTION-DRIVEN BULK EVAPORATION AND CONDENSATION PROCESSES WITH CONSTANT VOLUME
663
Numerical modelling of contaminant transport in coastal aquifers Original Research Article
664
Numerical modelling of convection dominated transport coupled with density driven flow in porous media
665
Numerical modelling of convection interacting with a melting and solidification front: Application to the thermal evolution of the basal magma ocean
666
Numerical modelling of convective layers in solar ponds
667
Numerical modelling of coupled surface and subsurface flow systems
668
Numerical modelling of crack growth profiles in integral skin-stringer panels
669
Numerical modelling of crack path in the lubricated rolling–sliding contact problems
670
Numerical modelling of crack propagation in ductile materials combining the GTN model and X-FEM
671
Numerical modelling of crack propagation: automatic remeshing and comparison of different criteria Original Research Article
672
Numerical modelling of crack shape evolution for surface flaws in round bars under tensile loading
673
Numerical modelling of crack shielding and deflection in a multi-layered material system
674
Numerical modelling of crack shielding and deflection in a multi-layered material system
675
Numerical modelling of crack shielding and deflection in a multi-layered material system
676
Numerical modelling of crack–contact interaction in 2D incomplete fretting contacts using X-FEM
677
Numerical modelling of cracking path in round bars subjected to cyclic tension and bending
678
Numerical modelling of cracks in masonry walls due to thermal movements in an overlying slab
679
Numerical modelling of cross-wedge rolling process of ball pin
680
Numerical modelling of crustal growth in intraoceanic volcanic arcs
681
Numerical modelling of cyclic plasticity and fatigue damage in cold-forging tools
682
Numerical modelling of cyclic plasticity and fatigue damage in cold-forging tools
683
Numerical modelling of cyclic plasticity and fatigue damage in cold-forging tools
684
Numerical modelling of damage behaviour of laser-hybrid welds
685
Numerical modelling of damage development and viscoplasticity in metal matrix composites Original Research Article
686
Numerical modelling of damage initiation in low-density thermally bonded nonwovens
687
Numerical modelling of damage susceptibility of an inhomogeneous representative material volume element of polymer composites
688
Numerical modelling of deformation and fluid flow in the Shuikoushan district, Hunan Province, South China
689
Numerical modelling of deformation changes induced by lake-level fluctuations of the Hohenwarte reservoir, Thuringia, Germany
690
Numerical modelling of depositional sequences in half-graben rift basins
691
Numerical modelling of dislocations and deformation mechanisms in CaIrO3 and MgGeO3 post-perovskites—Comparison with MgSiO3 post-perovskite
692
Numerical modelling of double integration with different data spacing: A Python-based approach
693
Numerical modelling of double-diffusive natural convection within an arc-shaped enclosure filled with a porous medium
694
Numerical modelling of droplet break-up for gas atomisation
695
Numerical modelling of ductile plastic damage in bulk metal forming
696
Numerical modelling of ductile plastic damage in bulk metal forming
697
Numerical modelling of ductile plastic damage in bulk metal forming
698
Numerical modelling of dykes deflected into sills to form a magma chamber
699
Numerical modelling of dynamic pressure and flow in hopper discharge using the Arbitrary Lagrangian–Eulerian formulation
700
Numerical modelling of dynamical interaction between seismic radiation and near-surface geological structures: a parallel approach
701
Numerical modelling of dynamically loaded metal foam-filled square columns
702
Numerical modelling of elastic–viscoplastic equal channel angular extrusion process of a polymer
703
Numerical modelling of electromagnetically-driven turbulent flows using LES methods
704
Numerical Modelling of End-Plate Moment Connection Subjected to Bending and Axial Forces
705
Numerical modelling of enhanced oil recovery by microbial flooding under non-isothermal conditions
706
Numerical modelling of entrainment/deposition in rock and debris-avalanches
707
Numerical modelling of extreme tropical cyclone winds
708
Numerical modelling of extreme tropical cyclone winds
709
Numerical modelling of fatigue crackʹs initiation in rolling contact of sintered steels
710
Numerical modelling of fault activities
711
Numerical modelling of faulting and fluid flow in porous rocks: An approach based on critical state soil mechanics
712
Numerical modelling of fibre reinforced concrete-filled stainless steel tubular columns
713
Numerical modelling of fibre-reinforced concrete fatigue in bending
714
Numerical modelling of filtration with and without sedimentation runs
715
Numerical modelling of fish eggs dispersion at the Patos Lagoon estuary — Brazil
716
Numerical modelling of floating debris in the world’s oceans
717
Numerical Modelling of Flow , Capillary Barrier Effects in Unsaturated Waste Rock Piles
718
Numerical modelling of flow and dispersion around Cinder Cone Butte
719
Numerical modelling of flow and transport in rough fractures
720
Numerical modelling of flow and transport processes in a calciner for cement production
721
Numerical modelling of flow field in compound channels with non-prismatic floodplains
722
Numerical Modelling of Flow in Morning Glory Spillways Using FLOW-3D
723
Numerical modelling of flow over stockpiles: Implications on dust emissions
724
Numerical modelling of flow phenomena in a pump with a multi-piped impeller
725
Numerical modelling of flow structures over idealized transverse aeolian dunes of varying geometry
726
Numerical modelling of flow through moving water-control gates by vortex method. Part I – problem formulation
727
Numerical modelling of flow through moving water-control gates by vortex method. Part II – calculation result
728
Numerical modelling of fluid infiltration constrained by fault and bedding relationships in the Fosterville goldfield, Victoria, Australia
729
Numerical modelling of fluid mixings in the H2O–NaCl system application to the North Caramal U prospect (Australia)
730
Numerical modelling of fluids mixing, heat transfer and non-equilibrium redox chemical reactions in fluid-saturated porous rocks
731
Numerical modelling of foam-cored sandwich plates under high-velocity impact
732
Numerical modelling of focussed fluid flow in theCascadia accretionary wedge
733
Numerical modelling of forced convective heat transfer from the inclined windward roof of an isolated low-rise building with application to photovoltaic/thermal systems
734
Numerical modelling of fracture initiation in large steel specimens at impact
735
Numerical modelling of fracture of particulate composites using SPH method
736
Numerical modelling of free surface flows in metallurgical vessels
737
Numerical modelling of free-surface flows in ship hydrodynamics
738
Numerical Modelling of Gas-Liquid Slug Flow Regime with a Conservative Two-Fluid Model Using the Shock Capturing Method
739
Numerical modelling of GFRP laminates with MSC.Marc system and experimental validation
740
Numerical modelling of glass dissolution: gel layer morphology
741
Numerical modelling of ground-borne noise and vibration in buildings due to surface rail traffic
742
Numerical modelling of heat and mass transfer in finned dehumidifier
743
Numerical modelling of heat transfer between gas and solid in a vibrated fluidised bed
744
Numerical modelling of heating in porous planetesimal collisions
745
Numerical modelling of heavy precipitation events over Eastern Pyrenees: Analysis of orographic effects
746
Numerical modelling of honeycomb core crush behaviour
747
NUMERICAL MODELLING OF HUMAN BODY FOR BLUETOOTH BODY-WORN APPLICATIONS
748
Numerical modelling of hydraulic decompression due to the excavation of tunnel and drifts at the Tournemire underground laboratory
749
Numerical modelling of hydraulic jumps in a spiral channel with rectangular cross section
750
Numerical modelling of hydrodynamics and gas dispersion in an autoclave
751
Numerical modelling of hydrodynamics and sand transport in the tide-dominated coastal-to-estuarine region
752
Numerical modelling of hydrogen desorption from cylindrical surface
753
Numerical modelling of hydrothermal flames. Micromixing effects over turbulent reaction rates
754
Numerical modelling of hydrothermal fluid flow and heat transfer in a tubular heat exchanger under near critical conditions
755
Numerical modelling of ice ridge keel action on subsea structures
756
Numerical modelling of impact crater formation associated with isolated lunar skylight candidates on lava tubes
757
Numerical modelling of impact melt production in porous rocks
758
Numerical modelling of impulse wave generated by fast landslides
759
Numerical modelling of in situ behaviour of the Callovo–Oxfordian argillite subjected to the thermal loading
760
Numerical modelling of incompressible flows for Newtonian and non-Newtonian fluids Original Research Article
761
Numerical modelling of induced rip currents by discontinuous submerged breakwaters
762
Numerical modelling of industrial indoor environments: A comparison between different turbulence models and supply systems supported by field measurements
763
Numerical modelling of in-flight particle dynamics of non-spherical powder
764
Numerical modelling of in-plane behaviour of URM walls and an investigation into the aspect ratio, vertical and horizontal post-tensioning and head joint as a parametric study
765
Numerical modelling of interface cracking in thermomechanically loaded elastoplastic bimaterials
766
Numerical modelling of interfacial soil erosion with viscous incompressible flows
767
Numerical modelling of lap joints bonded with a rate-dependent adhesive
768
Numerical Modelling of Large Asteroidal Impacts on the Earth
769
Numerical modelling of large deformation in metal powder forming Original Research Article
770
Numerical modelling of laterally impacted plates reinforced by free and end connected stiffeners
771
Numerical modelling of light gauge cold-formed steel compression members subjected to distortional buckling at elevated temperatures
772
Numerical modelling of liquid infusion into fibrous media undergoing compaction
773
Numerical modelling of liquid/solid phase transitions: Analysis of a gallium melting test
774
Numerical modelling of liquid-fuelled detonations in tubes
775
Numerical modelling of lithosphere evolution in the North China Block: Thermal versus tectonic thinning
776
Numerical modelling of lithosphere–asthenosphere interaction in a subduction zone
777
Numerical modelling of load bearing light gauge steel frame wall systems exposed to realistic design fires
778
Numerical modelling of localized fracture of inelastic solids in dynamic loading processes
779
Numerical modelling of longitudinal vibrations of a sucker rod string
780
Numerical modelling of low-density cellular materials
781
Numerical modelling of magnesium die-castings using stochastic fracture parameters
782
Numerical modelling of masonry: A material model accounting for damage effects and plastic strains
783
Numerical modelling of mass resolution in a scanning atom probe
784
Numerical modelling of mass resolution in a scanning atom probe
785
Numerical modelling of mass resolution in a scanning atom probe
786
Numerical modelling of mass transfer in an autoclave
787
Numerical modelling of MCFC cathode degradation in terms of morphological variations
788
NUMERICAL MODELLING OF MEDIAN ROAD TRAFFIC NOISE BARRIERS
789
Numerical modelling of metal droplet cooling and solidification
790
Numerical modelling of micro-machining of f.c.c. single crystal: Influence of strain gradients
791
Numerical modelling of micro-pitting of gear teeth flanks
792
Numerical modelling of mineral impact ionisation spectra
793
Numerical Modelling of Molten Carbonate Fuel Cell: Effects of Gas Flow Direction in Anode and Cathode
794
Numerical modelling of mud volcanoes and their flows using constraints from the Gulf of Cadiz
795
Numerical modelling of multi-directional irregular waves through breakwaters
796
Numerical modelling of natural convection in molten glass heated by induction
797
Numerical modelling of natural convection of oil inside distribution transformers
798
Numerical modelling of neoclassical double tearing modes
799
Numerical modelling of Newtonian and non-Newtonian representation of blood in a distal end-to-side vascular bypass graft anastomosis
800
Numerical modelling of non-confined and confined masonry walls
801
Numerical modelling of non-equilibrium graded sediment transport in a curved open channel
802
Numerical modelling of non-linear electroelasticity
803
Numerical modelling of nonlinear response of soil. Part 1: Constitutive model
804
Numerical modelling of nonlinear response of soil. Part 2: Strain localization investigation on sand
805
Numerical modelling of non-Newtonian slurry in a mechanical flotation cell
806
Numerical modelling of non-transform discontinuity geometry: Implications for ridge structure, volcano-tectonic fabric development and hydrothermal activity at segment ends
807
Numerical modelling of optical trapping Original Research Article
808
Numerical modelling of orthogonal cutting: influence of numerical parameters
809
Numerical modelling of oxidized microstructure and degraded properties of 2D C/SiC composites in air oxidizing environments below 800 °C
810
Numerical modelling of P/M steel bars subjected to fatigue loading using an extended Gurson model
811
Numerical modelling of partially filled aircraft fuel tanks submitted to Hydrodynamic Ram
812
Numerical modelling of particle distribution effects on fatigue in Al–SiCp composites
813
Numerical modelling of particle distribution effects on fatigue in Al–SiCp composites
814
Numerical modelling of perforation failure in fibre metal laminates subjected to low velocity impact loading
815
Numerical modelling of permafrost in bedrock in northern Fennoscandia during the Holocene
816
Numerical modelling of phytoplankton biomass in coastal waters
817
Numerical modelling of phytoplankton bloom in the upwelling ecosystem of Cabo Frio (Brazil)
818
Numerical modelling of phytoplankton bloom in the upwelling ecosystem of Cabo Frio (Brazil)
819
Numerical modelling of pipe internal stresses induced during the coating process – Influence of pipe geometric characteristics on stress state
820
Numerical modelling of plasticity-induced crack closure for interfacial cracks in bi-material specimens
821
Numerical modelling of POC dynamics in the southern Baltic under possible future conditions determined by nutrients, light and temperature*
822
Numerical Modelling of Porous Radiant Burners Using Full and Reduced Kinetics Mechanisms
823
Numerical modelling of powder metallurgical coatings on ring-shaped parts integrated with ring rolling
824
Numerical modelling of precipitation of topologically close-packed phases in nickel-base superalloys Original Research Article
825
Numerical modelling of pressurized fracture evolution in concrete using zero-thickness interface elements
826
Numerical modelling of production from the Poihipi dry steam zone: Wairakei geothermal system, New Zealand
827
Numerical modelling of propane combustion in a high velocity oxygen–fuel thermal spray gun
828
Numerical modelling of PT-paths related to rapid exhumation of highpressure rocks from the crustal root in the Variscan Erzgebirge Dome (Saxony/Germany)
829
Numerical modelling of quaking in tall silos
830
Numerical modelling of quaking in tall silos
831
Numerical modelling of quaking in tall silos
832
Numerical modelling of qualitative behaviour of solutions to convolution integral equations
833
Numerical modelling of quaternary deformation and post-rifting displacement in the Asal–Ghoubbet rift (Djibouti, Africa)
834
Numerical modelling of radiative heat transfer in an internal indirect reforming-type SOFC
835
Numerical modelling of radionuclide inventory for RBMK irradiated nuclear fuel
836
Numerical modelling of radon-222 entry into houses: an outline of techniques and results
837
Numerical modelling of regional scale transport and photochemistry directly together with meteorological processes
838
Numerical modelling of resistance changes in symmetric CFRP composite under the influence of structure damage
839
Numerical modelling of restrained structural subassemblies of steel beam and CFT columns connected using reverse channels in fire
840
Numerical modelling of riveted railway bridge connections for fatigue evaluation
841
Numerical modelling of rope elasticity for heave compensation lifting in offshore crane operations
842
Numerical modelling of saltwater up-coning: Comparison with experimental laboratory observations
843
Numerical modelling of sediment transport in the Nador lagoon (Morocco)
844
Numerical Modelling of Seismic Behavior of Retrofitted RC Beam-Column Joints
845
Numerical modelling of semi-rigid boltless connectors
846
Numerical modelling of shallow abandoned mine working subsidence affecting transport infrastructure
847
Numerical modelling of shear bands by element bands
848
Numerical modelling of shoal pattern formation in well-mixed elongated estuaries
849
Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction
850
Numerical modelling of simulated blood flow in idealized composite arterial coronary grafts: Transient flow
851
Numerical modelling of single-layer folding: clarification of an issue regarding the possible effect of computer codes and the influence of initial irregularities
852
Numerical Modelling of Slide-Head-Toppling Failure using FEM and DEM Methods
853
Numerical modelling of soil stress and pressure distribution on a flat tillage tool using computational fluid dynamics
854
Numerical modelling of some two-phase fluid flow problems Original Research Article
855
Numerical modelling of spatio-temporal thermal heterogeneity in a complex river system
856
Numerical modelling of spatio-temporal variability of growth of Mytilus edulis (L.) and influence of its cultivation on ecosystem functioning
857
Numerical modelling of steady-state fluxes at the ITER first wall
858
Numerical modelling of steam condensing flow in low and high-pressure nozzles
859
Numerical modelling of stone-block monumental structures
860
Numerical modelling of strain localisation and fluid flow during extensional fault reactivation: Implications for hydrocarbon preservation
861
Numerical modelling of strain localisation during extension of the continental lithosphere
862
Numerical modelling of strain localisation during extension of the continental lithosphere
863
Numerical modelling of stress fields and fracture around magma chambers
864
Numerical modelling of stress generation and microfracturing of vesicle walls in glassy rocks
865
Numerical modelling of structural controls on fluid flow and mineralization
866
Numerical modelling of structural fire behaviour of restrained steel beam–column assemblies using typical joint types
867
Numerical modelling of structures with thin air layers
868
Numerical modelling of sub-surface stress in magnetic data tape heads due to the dynamic contact with a tape
869
Numerical modelling of supercritical submerged water jets in a subcritical co-flow
870
Numerical modelling of swirl flow induced by a three-lobed helical pipe
871
Numerical modelling of tectonic plates subduction using X-FEM Original Research Article
872
Numerical modelling of temperature distribution for orbiting scroll wrap in an air scroll compressor
873
Numerical modelling of temperature fluctuations in superchilled fish loins packaged in expanded polystyrene and stored at dynamic temperature conditions
874
Numerical modelling of temperature fluctuations of chilled and superchilled cod fillets packaged in expanded polystyrene boxes stored on pallets under dynamic temperature conditions Original Research Article
875
Numerical modelling of the adsorption and thermal desorption of NH3 on ZrO2
876
Numerical modelling of the barometric pressure-induced noise in horizontal components for the observatories Moxa and Schiltach
877
Numerical modelling of the behaviour of consolidated porous media exposed to frost action
878
Numerical modelling of the boundary conditions on beams stuck transversely by a mass
879
Numerical modelling of the breakage of loose agglomerates of fine particles
880
Numerical modelling of the carrier gas phase in a laboratory-scale coal classifier model
881
Numerical modelling of the co-firing of pulverised coal and straw in a 300 MWe tangentially fired boiler
882
Numerical modelling of the cyclic behaviour of RC elements built with plain reinforcing bars
883
Numerical modelling of the dynamic response of ice-shedding on electrical transmission lines
884
Numerical modelling of the Earth’s magnetosheath for different IMF orientations Original Research Article
885
Numerical modelling of the effect of matrix anisotropy orientation on single layer fold development
886
Numerical modelling of the effective conductivities of composites with arbitrarily shaped inclusions and highly conducting interface
887
Numerical modelling of the effects of fault slip on fluid flow around extensional faults
888
Numerical modelling of the effects of fault slip on fluid flow around extensional faults: Discussion
889
Numerical modelling of the effects of fault slip on fluid flow around extensional faults: Reply
890
Numerical modelling of the effects of porosity changes on the mechanical properties of nuclear graphite
891
Numerical modelling of the excitation energy dependence of adsorbate photochemistry at metal surfaces
892
Numerical modelling of the extension-torsion coupling in cables
893
Numerical modelling of the fatigue behavior of fibre-reinforced composites
894
NUMERICAL MODELLING OF THE FLUID AND PARTICLE PENETRATION THROUGH SMALL SAMPLING CYCLONES
895
Numerical modelling of the generation of active surfaces of deep drawing dies
896
Numerical modelling of the gravity-induced destabilization of a slope: The example of the La Clapière landslide, southern France
897
Numerical modelling of the growth of a cellular/dendritic array in multi-component alloys
898
Numerical modelling of the growth of a cellular/dendritic array in multi-component alloys
899
Numerical Modelling of the Heterogeneous Rock Fracture Process Using Various Test Techniques
900
Numerical modelling of the hydrodynamic ram phenomenon
901
Numerical modelling of the hygro-thermal response of timber bridges during their service life: A monitoring case-study
902
Numerical modelling of the impact crater depth–diameter dependence in an acoustically fluidized target
903
Numerical modelling of the initial spread of sewage from diffusers in the Bay of Piran (northern Adriatic)
904
Numerical modelling of the initial spread of sewage from diffusers in the Bay of Piran (northern Adriatic)
905
Numerical modelling of the low-velocity impact response of composite sandwich beams with honeycomb core
906
Numerical modelling of the Marangoni effects induced by plankton-generated surfactants
907
Numerical modelling of the material flow during extrusion of aluminium alloys and transverse weld formation Original Research Article
908
Numerical modelling of the mean flow characteristics of the Leeuwin Current System
909
Numerical modelling of the mechanical behaviour of steel brace modi ed by CFRP sheet
910
Numerical modelling of the memory effect in wet scrubbers Original Research Article
911
Numerical modelling of the metal flow and stock bending during the rolling of unequal angle bar
912
Numerical modelling of the metal flow during the rolling process of the round screw-ribbed bar in the finishing pass
913
Numerical modelling of the natural ventilation of underground transformer substations
914
Numerical modelling of the passive control of air pollution in asymmetrical urban street canyons using refined mesh discretization schemes
915
Numerical modelling of the physical factors that affect mass transport in the vasculature at early time periods
916
Numerical modelling of the planktonic succession in a nutrient-rich reservoir: environmental and physiological factors leading to Microcystis aeruginosa dominance
917
Numerical modelling of the planktonic succession in a nutrient-rich reservoir: environmental and physiological factors leading to Microcystis aeruginosa dominance
918
Numerical modelling of the plasticity induced during diffusive transformation. An ensemble averaging approach for the case of random arrays of nuclei
919
Numerical modelling of the plasticity induced during diffusive transformation. Case of a cubic array of nuclei
920
Numerical modelling of the pressure wave propagation in the arterial flow
921
Numerical modelling of the processes of exposure and development in electron beam lithography on high temperature superconductor thin films Original Research Article
922
Numerical modelling of the propagation of fast landslides using the finite element method
923
Numerical modelling of the pull-out of hooked steel fibres from high-strength cementitious matrix, supplemented by experimental results
924
Numerical modelling of the quantum-tail effect on fusion rates at low energy
925
Numerical modelling of the radiation efficiency of asymmetrical structures
926
Numerical modelling of the rotary furnace in aluminium recycling processes
927
Numerical Modelling of the Segmental Lining of Underground Structures
928
Numerical modelling of the self-heating process of a wet porous medium
929
Numerical modelling of the shelf break ecosystem: reproducing benthic and pelagic measurements
930
Numerical modelling of the solar cladding process
931
NUMERICAL MODELLING OF THE SOUND FIELDS IN URBAN STREETS WITH DIFFUSELY REFLECTING BOUNDARIES
932
Numerical modelling of the spatial acoustic response of the human pinna
933
Numerical modelling of the speech intelligibility in dining spaces
934
Numerical modelling of the structural behaviour of Buti’s bell tower
935
Numerical modelling of the structural behaviour of thin-walled cast magnesium components
936
Numerical modelling of the structural behaviour of thin-walled cast magnesium components using a through-process approach
937
Numerical modelling of the suspended sediment transport in Torres Strait
938
Numerical modelling of the tailored tempering process applied to 22MnB5 sheets
939
Numerical modelling of the temperature distribution in a two-phase closed thermosyphon
940
Numerical modelling of the temperature increase in frozen food packaged in pallets in the distribution chain
941
Numerical modelling of the thermal bar and its ecological consequences in a river-dominated lake
942
Numerical modelling of the thermal deformation of CVC roll in hot strip rolling
943
Numerical modelling of the transport of trace gases including methane in the subsurface of Mars
944
Numerical modelling of the tsunami triggered by the Güىmar debris avalanche, Tenerife (Canary Islands): Comparison with field-based data
945
Numerical modelling of the two-dimensional Fourier transformed Vlasov–Maxwell system
946
Numerical modelling of the underground roadways in coal mines– uncertainties caused by use of empiricalbased downgrading methods and in situ stresses
947
Numerical modelling of the Young’s modulus of syntactic foams
948
Numerical modelling of thermal processes in an electrical transformer dipped into polymerised resin by using commercial CFD package fluent
949
Numerical modelling of thermomechanical solids with mechanically energetic (generalised) Kapitza interfaces
950
Numerical modelling of thin-walled hypereutectic ductile cast iron parts Original Research Article
951
Numerical modelling of three-dimensional fluid flow in a spiral compensator
952
Numerical modelling of thrust structures in unconsolidated sediments: implications for glaciotectonic deformation
953
Numerical Modelling of Tidal Circulation and Sediment Transport in the Gulf of Khambhat and Narmada Estuary, West Coast of India
954
Numerical modelling of tidal flows in complex estuaries including turbulence: an unstructured finite volume solver and experimental validation
955
Numerical Modelling of Timber Braced Frame Masonry Structures (Dhajji Dewari)
956
Numerical Modelling of Tracer Transport in Unsaturated Porous Media
957
Numerical modelling of transient liquid phase bonding and other diffusion controlled phase changes
958
Numerical Modelling of Transport Phenomena and Macrosegregation during Ternary Alloy Solidification: Solutal Undercooling Effects
959
Numerical modelling of transport, dispersion, and deposition — validation against ETEX-1, ETEX-2 and Chernobyl
960
Numerical modelling of trap-assisted tunnelling mechanism in a-Si:H and μc-Si n/p structures and tandem solar cells
961
Numerical Modelling of Tsunamis Generated by Hypothetical Landslides in the Strait of Georgia, British Columbia
962
Numerical modelling of tube bundle thermal energy storage for free-cooling of buildings
963
Numerical modelling of tunnelling induced ground deformation and its control
964
Numerical modelling of turbidity currents in the Xiaolangdi reservoir, Yellow River, China
965
Numerical modelling of turbulent flow through spillway with gated operation
966
NUMERICAL MODELLING OF TWIN-ROLL CASTING BY THE COUPLED FLUID FLOW AND HEAT TRANSFER MODEL
967
Numerical modelling of two-dimensional morphodynamics with applications to river bars and bifurcations
968
Numerical modelling of two-phase flow in a geocentrifuge
969
Numerical modelling of two-way propagation of non-linear dispersive waves Original Research Article
970
Numerical modelling of two-way reinforced concrete slabs in fire
971
Numerical modelling of UV intensity: Application to collimated-beam reactors and continuous-flow systems
972
Numerical modelling of ventilated facades: A review
973
Numerical modelling of void inclusions in porous media
974
Numerical modelling of wave current interactions at a local scale
975
Numerical modelling of welding Original Research Article
976
Numerical modelling of wellbore behaviour in fractured rock masses
977
Numerical modelling of wire-pipe electrostatic precipitator for control of fine particulates
978
Numerical modelling of yielding shear panel device for passive energy dissipation
979
Numerical modelling on transport of nitrogen from wastewater and fertilizer applied on paddy fields
980
Numerical modelling on transport of nitrogen from wastewater and fertilizer applied on paddy fields
981
Numerical modelling the effect of wind on Water Level and Evaporation Rate in the Persian Gulf
982
Numerical modelling, prediction of Cu–W nano powder composite in dry sliding wear condition using response surface methodology
983
Numerical models for nonlinear analysis of elastic shells with eigenmode-affine imperfections
984
Numerical models for the control of inherited basin geometries on structures and emplacement of the Klippen nappe (Swiss Prealps)
985
Numerical models for the management of land and water resources salinisation Original Research Article
986
Numerical models for the seismic assessment of an old masonry tower
987
Numerical models for thermal residual stresses in Al2O3 platelets/borosilicate glass matrix composites
988
Numerical models for thermal residual stresses in Al2O3 platelets/borosilicate glass matrix composites
989
Numerical models in simulating wire-plate electrostatic precipitators: A review
990
Numerical models of an induction machine
991
Numerical models of crustal scale convection and partial melting beneath the Altiplano–Puna plateau
992
Numerical models of flow patterns around a rigid inclusion in a viscous matrix undergoing simple shear: implications of model parameters and boundary conditions
993
Numerical models of HDR geothermal reservoirs—a review of current thinking and progress
994
Numerical models of in-service welding of gas pipelines
995
Numerical models of marine sediment transport and deposition
996
Numerical models of orthotropic and lamellar grain structures
997
Numerical models of Saturnʹs long-lived anticyclones
998
Numerical models of shear fracture propagation
999
Numerical models of shear-induced melt band formation with anisotropic matrix viscosity
1000
Numerical models of solar distillation device: Present and previous Original Research Article