<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Optimization of operating conditions for the determination of perchlorate in biological samples using preconcentration/preelution ion chromatography
2
Optimization of operating conditions of a cooling tunnel for production of hard candies Original Research Article
3
Optimization of operating conditions of axially and radially viewed plasmas for the determination of trace element concentrations from ultrasound-assisted digests of soil samples contaminated by lead pellets Original Research Article
4
Optimization of operating conditions of rosemary essential oil extraction by a fast controlled pressure drop process using response surface methodology Original Research Article
5
Optimization of Operating Conditions of Third Harmonic Ground-Fault Protection System of Generator-Transformer Unit With Two-States Transverse Parameters
6
Optimization of operating parameters affecting the removal of chromium from aqueous solution using bio absorption Jujube fruit powder, Jujube fruit charcoal and compression with Granular Activated Car
7
Optimization of operating parameters for coarse sphalerite flotation in the HydroFloat fluidised-bed separator
8
Optimization of operating parameters for inductively coupled plasma mass spectrometry: A computational study
9
Optimization of operating parameters for inductively coupled plasma mass spectrometry: A computational study
10
Optimization of operating parameters for liquid-cooled PEM fuel cell stacks using Taguchi method
11
Optimization of operating parameters for sludge process reduction under alternating aerobic/oxygen-limited conditions by response surface methodology
12
Optimization of operating parameters for supercritical carbon dioxide extraction of lycopene by response surface methodology Original Research Article
13
Optimization of Operating Parameters in the Removal of Synthetic Textile Dyestuff with the Electrocoagulation Process
14
Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II
15
Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept
16
Optimization of operating schedule of machines in granite industry using evolutionary algorithms
17
Optimization of operating temperature in cryocooled HTS magnets for compactness and efficiency Original Research Article
18
Optimization of operation and maintenance of nuclear power plant by probabilistic fracture mechanics Original Research Article
19
Optimization of operation mode for the concentration by NF of clarified fermentation broths Original Research Article
20
Optimization of operation parameters of refrigeration cycle using particle swarm and NLP techniques
21
Optimization of operational and design parameters of plane reflector-tilted flat plate solar collector systems
22
Optimization of operational conditions for biodegradation of chlorophenols by laccase-polyacrilonitrile beads system
23
OPTIMIZATION OF OPERATIONAL PARAMETERS FOR DECOLORIZATION AND DEGRADATION OF C. I. REACTIVE BLUE 29 BY OZONE
24
Optimization of Operational Parameters in Rhamnolipid Production by Pseudomonas aeruginosa MM1011 in a Miniaturized Shaken Bioreactor
25
Optimization of Operations in Supply Chain Systems Using Hybrid Systems Approach and Model Predictive Control
26
Optimization of optical cross-connects with wave-mixing conversion
27
Optimization of optical filters for ITER edge Thomson scattering diagnostics
28
Optimization of optical klystron for coherent harmonic generation FEL
29
Optimization of optical klystron for coherent harmonic generation FEL
30
Optimization of optical lens-controlled scanning electron microscopic resolution using generalized regression neural network and genetic algorithm
31
Optimization of order policies in supply networks
32
Optimization of Order Quantity for Multi-Product from Multi-Supplier with Discounted Prices
33
Optimization of order-up-to-S policies for two-level inventory systems with compound Poisson demand
34
Optimization of organic and conventional olive agricultural practices from a Life Cycle Assessment and Life Cycle Costing perspectives
35
Optimization of organic compounds removal from Wastewater by Electrocoagulation
36
Optimization of organic light-emitting diode containing hydrochlorosilole electron transport layer through impedance spectroscopy analysis
37
Optimization of organic solar cells with thin film Au as anode
38
Optimization of organosolv pretreatment of starch waste from sugar palm trunk (Arenga pinnata) for the production of reducing sugar
39
Optimization of orientation for higher yield of solar still for a given location
40
Optimization of Orius majusculus release: photoperiodic sensitivity at different temperatures and storage of diapausing adults
41
Optimization of Orthogonal Polyphase Coding Waveform for MIMO Radar based on Evolutionary Algorithms
42
Optimization of Oscillation Model for Slab Continuous Casting Mould Based on Mould Friction Measurements in Plant Trial Original Research Article
43
Optimization of osmotic dehydration of bananas followed by air-drying
44
Optimization of osmotic dehydration of cantaloupe using desired function methodology Original Research Article
45
OPTIMIZATION OF OSMOTIC DEHYDRATION OF HONEYDEW USING RESPONCE SURFACE METHODOLOGY
46
Optimization of osmotic dehydration of potato using response surface methodology Original Research Article
47
Optimization of osmotic dehydration of tomatoes in a ternary system followed by air-drying Original Research Article
48
Optimization of osmotic dehydration of yam bean (Pachyrhizus erosus) using an orthogonal experimental design Original Research Article
49
Optimization of Outfall Systems in RO Desalination Plants (Case study: Bandar Abbas Desalination)
50
Optimization of oven toasting for improving crispness and other quality attributes of ready to eat potato-soy snack using response surface methodology Original Research Article
51
Optimization of oversized waveguide components using a genetic algorithm
52
Optimization of Oxidation Pond Efficiency in Animal Farm Wastewater Treatment
53
Optimization of oxidative bioconversions catalyzed by phenylacetone monooxygenase from Thermobifida fusca
54
Optimization of oxidative desulfurization of dibenzothiophene using acidic ionic liquid as catalytic solvent
55
Optimization of oxidative desulfurization of thiophene using Cu/titanium silicate-1 by box-behnken design
56
Optimization of ozone and coagulation processes for bromate control in Istanbul drinking waters Original Research Article
57
Optimization of ozone treatment of fresh-cut green leaf lettuce Original Research Article
58
Optimization of p/n multilayer structure for organic photoreceptor device
59
Optimization of pack parameters for hot deformation of TiAl alloys
60
Optimization of PACl dose to reduce RO cleaning in an IMS Original Research Article
61
Optimization of palm kernel shell torrefaction to produce energy densified bio-coal
62
Optimization of parabolic trough solar collectors integrated with two stage Rankine cycle
63
Optimization of parallel machine scheduling problem with human resiliency engineering: A new hybrid meta-heuristics approach
64
Optimization of parameter settings to achieve improved moisture absorption properties of Bamboo fibre composites
65
Optimization of parameter settings to achieve improved tensile and impact strength of bamboo fibre composites
66
Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching
67
Optimization of parameters affecting separation of gas mixture of O2, N2, CO2 and CH4 by PMP membrane modified with TiO2, ZnO and Al2O3 nanoparticles
68
Optimization of parameters and adsorption mechanism of thiabendazole fungicide by a montmorillonite of North Patagonia, Argentina
69
Optimization of parameters for adsorption of metal ions onto rice husk ash using Taguchi’s experimental design methodology
70
Optimization of parameters for adsorption of metal ions onto rice husk ash using Taguchiʹs experimental design methodology
71
Optimization of parameters for an aluminum melting furnace using the Taguchi approach
72
Optimization of parameters for anaerobic co-metabolic degradation of TBBPA
73
Optimization of parameters for curve interpolation by cubic splines
74
Optimization of parameters for deposition of Ga-doped ZnO films by DC reactive magnetron sputtering using Taguchi method
75
Optimization of Parameters for Separation of the Medium Rare Earth Element Group from Other Rare Earth Elements by Precipitation Method Using Box- Behken Design
76
Optimization of parameters for silicon planar source of modulated infrared radiation
77
Optimization of parameters for the analysis of aromatic amines in finger-paints
78
Optimization of parameters for the fabrication of gelatin nanoparticles by the Taguchi robust design method
79
Optimization of Parameters for the Friction Stir Processing and Welding of AA1050 Aluminum Alloy
80
Optimization of parameters for the supercritical fluid extraction in the determination of N-nitrosamines in rubbers
81
Optimization of parameters for the synthesis of bimodal Ag nanoparticles by Taguchi method
82
Optimization of parameters for the synthesis of zinc oxide nanoparticles by Taguchi robust design method
83
Optimization of parameters in 16-slice CT-scan protocols for reduction of the absorbed dose
84
Optimization of parameters of high-performance displacement chromatography for separation of soybean phosphatidylcholine and phosphatidylethanolamine
85
Optimization of parameters used for freshwater survey
86
Optimization of parametric performance of a PEMFC
87
Optimization of partial constrained layer damping treatment for vibrational energy minimization of vibrating beams
88
Optimization of partial interaction in bolted side-plated reinforced concrete beams
89
Optimization of partial nitritation in a continuous flow internal loop airlift reactor
90
Optimization of Particle Dimensions for High Efficiency in Capillary Electrochromatography
91
Optimization of Pass Schedule in Hot Strip Rolling Original Research Article
92
Optimization of passivation layers for corrosion protection of silicon-based microelectrode arrays
93
Optimization of passive design measures for residential buildings in different Chinese areas
94
Optimization of passive solar design strategies: A review
95
Optimization of passively damped composite structures
96
Optimization of Pasta Formulation Containing Wheat, Quinoa Flour and Purslane Leaves Powder
97
Optimization of Pb(II) Adsorption onto Australian Pine Cones-Based Activated Carbon by Pulsed Microwave Heating Activation
98
Optimization of Pb(II) biosorption by Robinia tree leaves using statistical design of experiments
99
Optimization of PCR protocol in microsatellite analysis with silver and SYBR® stains
100
Optimization of PCR-based methods for rapid detection of Campylobacter jejuni, Campylobacter coli and Yersinia enterocolitica serovar 0:3 in wastewater samples
101
Optimization of peak power of passively Q-switched lasers by taking into account intracavity laser spatial distribution
102
Optimization of pectin extraction assisted by microwave from apple pomace using response surface methodology Original Research Article
103
Optimization of pectin extraction from lemon by-product with acidified date juice using response surface methodology
104
Optimization of pectin extraction from lemon by-product with acidified date juice using response surface methodology
105
Optimization of Pectin Extractions from Walnut Green Husks and Characterization of the Extraction Physicochemical and Rheological Properties
106
Optimization of Pectinase Production from Pesudomonas sp. Isolated from Iraqi Soil
107
Optimization of PECVD SiN:H films for silicon solar cells
108
Optimization of pelletisation and combustion in a boiler of 17.5 kWth for vine shoots and industrial cork residue
109
Optimization of PEM fuel cell flow channel dimensions—Mathematic modeling analysis and experimental verification
110
Optimization of PEM fuel cell flow field via local current density measurement
111
Optimization of peptide and protein separation with a monolithic reversed-phase column and application to arsenic-binding studies
112
Optimization of peptide-based inhibitors of prostate-specific antigen (PSA) as targeted imaging agents for prostate cancer Original Research Article
113
Optimization of perfluoro nano-scale emulsions: The importance of particle size for enhanced oxygen transfer in biomedical applications
114
Optimization of performance characteristics in a class of irreversible chemical pumps
115
Optimization of performance characteristics of a mixed dye based photogalvanic cell for efficient solar energy conversion and storage
116
Optimization of performance measures in Doroodzan Irrigation Network
117
Optimization of Performance of Coarse Aggregate-Assisted Single-Slope Solar Still via Taguchi Approach
118
Optimization of performance of monolithic capillary column in gas chromatographic separations
119
Optimization of periodic testing frequency of a reactor protection system based on a risk-cost model and public risk perception
120
Optimization of peripheral finned-tube evaporators using entropy generation minimization
121
Optimization of peripheral non-round cylindrical grinding via an adaptable constant-temperature process
122
Optimization of Perturb and Observe Maximum Power Point Tracking Method
123
Optimization of pGEX System to Express and Isolate Mycobacterium tuberculosis Inclusion Body Protein in Combining withModified Refolding Method
124
Optimization of pH controlled liquid hot water pretreatment of corn stover
125
Optimization of phase-modulated excimer-laser annealing method for growing highly-packed large-grains in Si thin-films
126
Optimization of Phenanthrene-degradation by Dietzia Cinnamea AP for Bioremediation Applications
127
Optimization of phenol adsorption onto bentonite by factorial design methodology
128
Optimization of phenol biodegradation by efficient bacteria isolated from petrochemical effluents
129
Optimization of phenol biodegradation by efficient bacteria isolated from petrochemical effluents
130
Optimization of Phenolic Compound Extraction from Pistachio Green Hulls: Influence of Blanching, Harvest Time, Solvent Concentration, and Extraction Method
131
Optimization of phenolic compounds analysis by capillary electrophoresis
132
Optimization of phenolics and dietary fibre extraction from date seeds
133
Optimization of phosphate removal in anodizing aluminium wastewater
134
Optimization of Phospholipase A1 Immobilization on Plasma Surface Modified Chitosan Nanofibrous Mat
135
Optimization of Phosphoric Acid-Based Emitter Formation on Silicon Wafer
136
Optimization of phosphorus localization by EFTEM of nucleic acid containing structures
137
optimization of photo catalytic activity of zno nano composites by surface modification with cu metal using facile hydrothermal approach
138
Optimization of photocatalytic performance of TiO2 coated glass microspheres using response surface methodology and the application for degradation of dimethyl phthalate
139
Optimization of photocatalytic production of hydrogen from hydrogen sulfide in alkaline solution using response surface methodology Original Research Article
140
Optimization of Photocatalytic Reduction of Cr(VI) in Water with Nano ZnO/Todorokite as a Catalyst: Using Taguchi Experimental Design
141
Optimization of photodynamic therapy response by survivin gene knockdown in human metastatic breast cancer T47D cells
142
Optimization of photo-hydrogen production based on cheese whey spent medium
143
Optimization of photoluminescence properties of Porous silicon by adding gold nanoparticles
144
Optimization of photonic nanostructures Original Research Article
145
Optimization of photosynthetic hydrogen production from acetate by Rhodobacter sphaeroides RV
146
Optimization of photosynthetic hydrogen yield from platinized photosystem I complexes using response surface methodology
147
Optimization of phototrophic hydrogen production by Rhodopseudomonas palustris PBUM001 via statistical experimental design
148
Optimization of phthalic acid batch biodegradation and the use of modified Richards model for modelling degradation
149
Optimization of phycocyanin extraction from Spirulina platensis using factorial design
150
Optimization of Physical and Imaging Properties of Flat Bread Enriched with Quinoa Flour
151
Optimization of physical and mechanical properties for chitosan–nanocellulose biocomposites
152
Optimization of physical filtering for selective high temperature H2 sensors
153
Optimization of physical flows in an automotive manufacturing plant: some experiments ، issues
154
Optimization of Physical Mixtures of Pt/ZrO2 and H-Form Zeolites for Catalysis of the NO-H2-O2 Reaction
155
Optimization of physicochemical characteristics of a lithium anode interface for high-efficiency cycling: an effect of electrolyte temperature
156
Optimization of Physicochemical Characteristics of Corn-Based Extruded Snacks Containing Pomegranate Seed Powders
157
Optimization of physicochemical parameters for bioleaching of sphalerite by Acidithiobacillus ferrooxidans using shaking bioreactors
158
Optimization of physicochemical parameters in the biofabrication of gold nanoparticles using marine macroalgae Padina tetrastromatica and its catalytic efficacy in the degradation of organic dyes
159
Optimization of physico-chemical properties of gelatin extracted from fish skin of rainbow trout (Onchorhynchus mykiss)
160
Optimization of Physiochemical Parameters during Bioremediation of Synthetic Dye by Marasmius cladophyllus UMAS MS8 Using Statistical Approach
161
Optimization of Phytase Concentration from Aspergillus ficuum for Phytate-bound Phosphorus Release in Cereal Meals
162
Optimization of phytase production by Penicillium purpurogenum GE1 under solid state fermentation by using Box–Behnken design
163
Optimization of PI parameters for DSP-based permanent magnet brushless motor drive using response surface methodology
164
Optimization of PIC codes by improved memory management
165
Optimization of PID Controller with Supervisory Fuzzy Control for Industrial Robots
166
Optimization of pigment dyeing process of high performance fibers using feed-forward bottleneck neural networks mapping technique Original Research Article
167
Optimization of pilot tones using differential evolution algorithm in MIMO-OFDM systems
168
Optimization of pinhole collimator for small animal SPECT using Monte Carlo simulation
169
Optimization of pipeline transport for CO2 sequestration
170
Optimization of piperazinebenzylamines with a N-(1-methoxy-2-propyl) side chain as potent and selective antagonists of the human melanocortin-4 receptor
171
OPTIMIZATION OF PLACEMENT/VOLTAGE OF PIEZOELECTRIC ACTUATORS ON AN L-SHAPE BEAM USING PARTICLE SWARM OPTIMIZATION ALGORITHM
172
Optimization of Planar Five bar Parallel Mechanism via Self-reconfiguration Method
173
Optimization of planning an advertising campaign of goods and services
174
Optimization of plant coverage in relation to water balance in the Loess Plateau of China
175
Optimization of plant growth regulators for in vitro shoot proliferation of apple cv. Abbasiʼ using response surface method
176
Optimization of plant growth-promoting bacteria-assisted phytostabilization of mine tailings
177
Optimization of plant growth-promoting bacteria-assisted phytostabilization of mine tailings
178
Optimization of plasma enhanced chemical vapor deposition process parameters for hardness improvement of diamond-like carbon coatings
179
Optimization of plasma initiation in the ITER Tokamak
180
Optimization of plasma parameters for high rate deposition of titanium nitride films as protective coating on bell-metal by reactive sputtering in cylindrical magnetron device
181
Optimization of plasma performance for a helical fusion reactor
182
Optimization of plasma spray parameters on the mechanical properties of agglomerated Al2O3–13%TiO2 coated mild steel
183
Optimization of plasma-assisted chemical vapour deposition hard coatings for their application in aluminium die-casting
184
Optimization of plasma-deposited silicon oxinitride films for optical channel waveguides
185
Optimization of plasma-enhanced chemical vapor deposition parameters for the growth of individual vertical carbon nanotubes as field emitters Original Research Article
186
Optimization of plasmon excitation at structured apertures
187
Optimization of plastic conical shells loaded by a rigid central boss
188
Optimization of Plastic Injection Molding Process by Combination of Artificial Neural Network and Genetic Algorithm
189
Optimization of plate-fin heat exchangers by an improved harmony search algorithm
190
Optimization of platinum adhesion in electrochemical etching process for multi-sensor systems
191
Optimization of platinum adhesion in electrochemical etching process for multi-sensor systems
192
Optimization of platinum filament micropyrolyzer for studying primary decomposition in cellulose pyrolysis
193
Optimization of platinum filament micropyrolyzer for studying primary decomposition in cellulose pyrolysis
194
Optimization of platinum/iridium ratio in thin sputtered films for PEMFC cathodes
195
Optimization of pleated filter designs
196
Optimization of Pleated Filter Designs Using a Finite-Element Numerical Model
197
Optimization of ply angles in laminated composite structures by a hybrid, asynchronous, parallel evolutionary algorithm
198
Optimization of PM Segments Shift Angles for Minimizing the Cogging Torque of YASA-AFPM Machines Using Response Surface Methodology
199
Optimization of PM stabilization for balanced sensitivities and variations of spin valve heads
200
Optimization of polarimetry sensitivity for X-ray CCD
201
Optimization of polarimetry sensitivity for X-ray CCD
202
Optimization of polling systems with Bernoulli schedules
203
Optimization of poly(1,4-cyclohexylidene cyclohexane-1,4-dicarboxylate) (PCCD) preparation for increased crystallinity
204
Optimization of poly(l-lactic acid)/segmented polyurethane electrospinning process for the production of bilayered small-diameter nanofibrous tubular structures
205
Optimization of poly-3-methylthiophene to be used in advance polymer batteries
206
Optimization of polyhydroxyalkanoates fermentations with on-line capacitance measurement
207
Optimization of Polymer Electrolyte Membrane Fuel Cell Performance by Geometrical Changes
208
Optimization of polymer flood performance by preflush injection - numerical investigation
209
Optimization of Polymerase Chain Reaction (PCR) of Mitochondrial Cytochrome c Oxidase I (COI) Gene in Two Bornean Fanged Frogs
210
Optimization of polymeric host composition for polymer-based electrophosphorescent devices
211
Optimization of polymeric triiodide membrane electrode based on clozapine–triiodide ion-pair using experimental design
212
Optimization of Polynomial Functions
213
Optimization of polyol ester production by transesterification of Jatropha-based methyl ester with trimethylolpropane using Taguchi design of experiment
214
Optimization of polysaccharides (ABP) extraction from the fruiting bodies of Agaricus blazei Murill using response surface methodology (RSM)
215
Optimization of polysaccharides (ABP) extraction from the fruiting bodies of Agaricus blazei Murill using response surface methodology (RSM)
216
Optimization of polysaccharides extraction from Clematis huchouensis Tamura and its antioxidant activity
217
Optimization of polysaccharides extraction from Gynostemma pentaphyllum Makino using Uniform Design
218
Optimization of polysaccharides extraction from seeds of Pharbitis nil and its anti-oxidant activity
219
Optimization of polysaccharides extraction from Trametes robiniophila and its antioxidant activities
220
Optimization of polysaccharides from Zagros oak leaf using RSM: Antioxidant and antimicrobial activities
221
Optimization of polystyrene-supported triphenylphosphine catalysts for aza-Morita–Baylis–Hillman reactions
222
Optimization of Polyurethane Foams for Enhanced Stir Bar Sorptive Extraction of Triazinic Herbicides in Water Matrices
223
Optimization of polyurethane membranes: Morphology and structure studies
224
Optimization of polyurethane-based hollow fiber membranes morphology and performance by post-treatment methods Original Research Article
225
Optimization of poly-ε-lysine production by Streptomyces noursei NRRL 5126
226
Optimization of Pooling Technique for Hepatitis C Virus Nucleic Acid Testing (NAT) in Blood Banks
227
Optimization of porosity formation in AlSi9Cu3 pressure die castings using genetic algorithm analysis
228
Optimization of porous current collectors for PEM water electrolysers
229
Optimization of Porous Silicon Conditions for DNA-based Biosensing via Reflectometric Interference Spectroscopy
230
Optimization of porous silicon multilayer as antireflection coatings for solar cells
231
Optimization of porous silicon preparation technology for SERS applications
232
Optimization of positively charged gold nanoparticles synthesized using a stainless-steel mesh and its application for colorimetric hydrogen peroxide detection
233
Optimization of Post-Based Merit Salary Based on CPI and University Characteristic Data
234
Optimization of post-column reactor radius in capillary high performance liquid chromatography: Effect of chromatographic column diameter and particle diameter
235
Optimization of power coefficient on a horizontal axis wind turbine using bem theory
236
Optimization of power deposition and a heating strategy for external ultrasound thermal therapy
237
Optimization of power in the problems of active control of sound Original Research Article
238
Optimization of power management in an hybrid electric vehicle using dynamic programming Original Research Article
239
Optimization of power output and study of electron beam energy spread in a Free Electron Laser oscillator
240
Optimization of power output and study of electron beam energy spread in a Free Electron Laser oscillator
241
OPTIMIZATION OF POWER OUTPUT OF A MICRO-HYDRO POWER STATION USING FUZZY LOGIC ALGORITHM
242
Optimization of power system controls within a simulation software package
243
Optimization of power train and control strategy of hybrid electric vehicles
244
Optimization of preconcentration and isolation for the determination of 15 phenols by supercritical-fluid extraction and gas chromatography with metallomesogenic stationary phase Original Research Article
245
Optimization of preconcentration procedure using magnetic nanoparticles for the determination of manganese in cereal samples
246
Optimization of preconcentration procedure using magnetic nanoparticles for the determination of manganese in cereal samples
247
Optimization of prediction methods for patents and trademarks in Spain through the use of exogenous variables Original Research Article
248
Optimization of Preform Shapes by RSM and FEM to Improve Deformation Homogeneity in Aerospace Forgings
249
Optimization of pre-industrial solar photocatalytic mineralization of commercial pesticides: Application to pesticide container recycling
250
Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology
251
Optimization of preparation conditions for activated carbons from date stones using response surface methodology
252
Optimization of preparation conditions for polydimethylsiloxane (PDMS)/ceramic composite pervaporation membranes using response surface methodology
253
Optimization of preparation conditions of activated carbon from agriculture waste utilizing factorial design
254
Optimization of preparation conditions of poly(vinylidene fluoride)/graphene oxide microfiltration membranes by the Taguchi experimental design Original Research Article
255
Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst
256
Optimization of preparation of chitosan-coated iron oxide nanoparticles for biomedical applications by chemometrics approaches
257
Optimization of preparation of matrix pellets containing ethylcellulose
258
Optimization of Preparation Techniques for Poly(Lactic Acid-Co-Glycolic Acid) Nanoparticles
259
Optimization of preparative chromatographic separation of multiple rare earth elements
260
Optimization of Pressure Swing Adsorption and Fractionated Vacuum Pressure Swing Adsorption Processes for CO2 Capture
261
Optimization of pressure-induced germination of Bacillus sporothermodurans spores in water and milk Original Research Article
262
Optimization of pressurized liquid extraction (PLE) for rapid determination of mineral oil saturated (MOSH) and aromatic hydrocarbons (MOAH) in cardboard and paper intended for food contact
263
Optimization of pressurized liquid extraction (PLE) of dioxin-furans and dioxin-like PCBs from environmental samples
264
Optimization of pressurized liquid extraction and purification conditions for gas chromatography–mass spectrometry determination of UV filters in sludge
265
Optimization of pressurized liquid extraction of inositols from pine nuts (Pinus pinea L.)
266
Optimization of pressurized liquid extraction of Piper gaudichaudianum Kunth leaves
267
Optimization of pressurized liquid extraction using a multivariate chemometric approach and comparison of solid-phase extraction cleanup steps for the determination of polycyclic aromatic hydrocarbons in mosses
268
Optimization of pressurized liquid extraction using a multivariate chemometric approach for the determination of anticancer drugs in sludge by ultra high performance liquid chromatography–tandem mass spectrometry
269
OPTIMIZATION OF PRETREATMENT CONDITIONS OF CARROTS TO MAXIMIZE JUICE RECOVERY BY RESPONSE SURFACE METHODOLOGY
270
Optimization of pretreatment conditions using full factorial design and enzymatic convertibility of shea tree sawdust
271
Optimization of pretreatment reaction for methyl ester production from chicken fat
272
Optimization of pretreatments for the hydrolysis of oil palm empty fruit bunch fiber (EFBF) using enzyme mixtures
273
Optimization of preventive maintenance and spare part provision for machine tools based on variable operational conditions
274
Optimization of primal and dual network models of distribution Original Research Article
275
Optimization of printed circuit board manufacturing: Integrated modeling and algorithms
276
Optimization of process conditions for enzymatic modification of alternan using dextranase from Chaetomium erraticum
277
Optimization of process conditions for the transfer molding of electronic packages
278
Optimization of process conditions in casting aluminum matrix composites via interconnection of artificial neurons and progressive solutions
279
Optimization of process conditions with attention to the sludge reduction and stable immobilization in a novel Tubificidae-reactor
280
Optimization of process conditions, characterization and mechanical properties of silane crosslinked high-density polyethylene
281
Optimization of process factors for solid-state bioconversion of domestic wastewater sludge
282
Optimization of process for the production of bio-oil from eucalyptus wood
283
Optimization of process for the production of fungal pectinases from deseeded sunflower head in submerged and solid-state conditions
284
Optimization of process integration in a Kraft pulp and paper mill – Evaporation train and CHP system
285
Optimization of process parameter involved in the effectiveness evaluation of continuous line manufacturing system (CLMS)
286
Optimization of process parameter of residual stresses for hard turned surfaces
287
Optimization of process parameters and catalyst compositions in carbon dioxide oxidative coupling of methane over CaO–MnO/CeO2 catalyst using response surface methodology
288
Optimization of Process Parameters by Response Surface Methodology for Methylene Blue Removal Using Cellulose Dusts
289
Optimization of Process Parameters During Drilling of Glass-Fiber Polyester Reinforced Composites Using DOE and ANOVA
290
Optimization of Process Parameters for Alkaline Protease Production by Bacillus licheniformis N-2 and Kinetics Studies in Batch Fermentation
291
Optimization of Process Parameters for Alkaline-Catalysed Transesterification of Palm Oil Using Response Surface Methodology
292
Optimization of Process Parameters for Catalytic Pyrolysis of Waste Tyre using Reactivated Fluid Catalytic Cracking Catalyst
293
Optimization of process parameters for deposition of Stellite on X45CrSi93 steel by plasma transferred arc technique
294
Optimization of Process Parameters for Enhanced Up-gradation of Qilla Saifullah Copper ore through Froth Floatation Technique
295
Optimization of process parameters for friction Stir welding of dissimilar Aluminum alloys (AA2024 -T6 and AA6351-T6) by using Taguchi method
296
Optimization of process parameters for high-efficiency polymer photovoltaic devices based on P3HT:PCBM system
297
Optimization of process parameters for lipase-catalyzed synthesis of esteramines-based esterquats using wavelet neural network (WNN) in 2-liter bioreactor
298
Optimization of process parameters for microwave drying of garlic cloves Original Research Article
299
Optimization of process parameters for milling of enzymatically pretreated Basmati rice Original Research Article
300
Optimization of process parameters for preparing WO3/polyacrylonitrile nanocomposites and the associated dispersion mechanism
301
Optimization of process parameters for supercritical carbon dioxide extraction of Passiflora seed oil by response surface methodology
302
Optimization of process parameters for the production of tyrosine phenol lyase by Citrobacter freundii MTCC 2424
303
Optimization of process parameters for the synthesis of silica gel-WC nanocomposite by design of experiment
304
Optimization of process parameters in a large-area hot-wire CVD reactor for the deposition of amorphous silicon (a-Si:H) for solar cell application with highly uniform material quality
305
Optimization of process parameters in flash pyrolysis of waste tyres to liquid and gaseous fuel in a fluidized bed reactor
306
Optimization of Process Parameters of Alkali Based Clay Catalyst for the Production of Biodiesel
307
Optimization of process parameters of boro-carburized low carbon steel for tensile strength by Taquchi method with grey relational analysis
308
Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys
309
Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds
310
Optimization of process parameters of the Pholiota squarrosa extracellular polysaccharide by Box–Behnken statistical design
311
Optimization of process parameters of the Pholiota squarrosa extracellular polysaccharide by Box–Behnken statistical design
312
Optimization of Process Parameters on Hydrothermal Liquefaction of Sambucus Ebulus for Bio-oil Production
313
Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel
314
Optimization of process parameters using D-optimal design for synthesis of ZnO nanoparticles via sol–gel technique
315
Optimization of process parameters using weighted convex loss functions
316
Optimization of process performance in a granule-based anaerobic ammonium oxidation (anammox) upflow anaerobic sludge blanket (UASB) reactor
317
Optimization of process variables by response surface methodology for methylene blue dye removal using Spruce sawdust/MgO nano-biocomposite
318
Optimization of process variables for enhanced lactic acid production utilizing paneer whey as substrate in SMF
319
Optimization of process variables for essential oil components from Satureja hortensis by supercritical fluid extraction using Box-Behnken experimental design
320
Optimization of process variables for the preparation of expanded finger millet using response surface methodology Original Research Article
321
Optimization of processing conditions for the fractionation of triticale straw using pressurized low polarity water
322
Optimization of processing conditions for the pretreatment of wheat straw using aqueous ionic liquid
323
Optimization of processing conditions for the sterilization of retorted short-rib patties using the response surface methodology
324
Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L(N) stainless steel
325
Optimization of processing parameters for cloudy ginkgo (Ginkgo biloba Linn.) juice Original Research Article
326
Optimization of processing parameters for extraction of total, insoluble and soluble dietary fibers of defatted rice bran
327
Optimization of Processing Parameters for Milling of Green Gram (Phaseolus aureus)
328
Optimization of processing parameters for preparation of LaNiO3 thin films from the citrate precursors
329
Optimization of Processing Parameters for Production of Pectinolytic Enzymes from Fermented Pineapple Residue of Mixed Aspergillus species
330
Optimization of processing parameters for the Al + 10% B4C system obtained by mechanical alloying
331
Optimization of processing parameters for the synthesis of tungsten carbide (WC) nanoparticles through solvo thermal route
332
Optimization of processing parameters of a ball mill refiner for chocolate Original Research Article
333
Optimization of processing parameters of horse mackerel (Trachurus japonicus) dried in a heat pump dehumidifier using response surface methodology Original Research Article
334
Optimization of Processing Parameters of Soybean Seeds Dried in a Constant-bed Dryer Using Response Surface Methodology
335
Optimization of processing parameters of the chemical vapor deposition process for synthesizing high-quality single-walled carbon nanotube fluff and roving
336
Optimization of processing parameters on the controlled growth of ZnO nanorod arrays for the performance improvement of solid-state dye-sensitized solar cells
337
Optimization of processing technology of Rhizoma Pinelliae Praeparatum and its anti-tumor effect
338
Optimization of Processing Time, Temperature, and Stirring Rate to Synthesize the Ag Nanoparticles Using Oregano Extract
339
Optimization of Processing Variables for Pistachio Paste Production
340
Optimization of processing variables in wood–rubber composite panel manufacturing technology
341
Optimization of producer gas fired premixed burner
342
Optimization of product performance of a paint formulation using a mixture experiment
343
Optimization of production allocation and transportation of customer orders for a leading forest products company
344
Optimization of production and antioxidant activity of fucoxanthin from marine haptophyte algae, Isochrysis galbana
345
Optimization of production conditions for activated carbons from Tamarind wood by zinc chloride using response surface methodology
346
Optimization of production conditions for mushroom polysaccharides with high yield and antitumor activity
347
optimization of production conditions of mahyaveh, a traditional iranian fish sauce, with low microbial load
348
Optimization of production of enzymatic protein hydrolysate-based flavor from sea grape (Caulerpa racemosa)
349
Optimization of production schedules in the steel production system
350
Optimization of production yield and functional properties of pectin extracted from sugar beet pulp
351
Optimization of production yields, radionuclidic purity and hotcell shielding of SPECT and PET radionuclides produced by proton irradiation in variable energy 30 MeV cyclotrons—Part 67Ga
352
Optimization of Profiled Diffuser Barrier Using the New Multi-
353
Optimization of propane pre-cooled mixed refrigerant LNG plant
354
Optimization of properties and operating parameters of a passive DMFC mini-stack at ambient temperature
355
Optimization of properties of fly ash aggregates for high-strength lightweight concrete production
356
Optimization of Proportions of Central Courtyard based on Comfort Standards in the Traditional Qajar Period Houses in Boushehr
357
Optimization of proppant size for frac pack completion using a new equipment
358
Optimization of prostate cancer radiotherapy using of a spacer gel, volumetric modulated arc therapy and a single biological organ at risk objective
359
Optimization of prostate carcinoma staging: Comparison of imaging and clinical methods
360
Optimization of prostate MRI acquisition and post-processing protocol: a pictorial review with access to acquisition protocols
361
Optimization of prot and customer satisfaction in combinatorial production and purchase model by genetic algorithm
362
Optimization of protease activity of alkaliphilic bacteria isolated from an alkaline lake in India
363
Optimization of Protease Production by Psychrotrophic Rheinheimera sp. with Response Surface Methodology
364
Optimization of protein conjugation using an aldehyde derivatized bifunctional chelating agent
365
Optimization of Protein Content in Earthworm-based Fish Feed Formulation for Catfish (Clarius gariepinus)
366
Optimization of protein encapsulation in PLGA nanoparticles
367
Optimization of Protein Extraction from Fermented and Non Fermented Perah Seed by using Response Surface Methodology
368
Optimization of protein force-field parameters with the Protein Data Bank
369
Optimization of protein identification from digests as analyzed by capillary isoelectric focusing-mass spectrometry
370
Optimization of protein in supplementary feeds for pond raised cyprinids
371
OPTIMIZATION OF PROTEIN ISOLATION FROM DATE PALM PLANTS AND ITS UTILIZATION IN DIFFERENTIAL PROTEOMICS ASSOCIATED WITH RED PALM WEEVIL INFESTATION
372
Optimization of protein precipitation based upon effectiveness of protein removal and ionization effect in liquid chromatography–tandem mass spectrometry
373
Optimization of Protein Production in Mammalian Cells with a Coexpressed Fluorescent Marker
374
Optimization of protein recovery by foam separation using response surface methodology Original Research Article
375
OPTIMIZATION OF PROTOCOLS FOR TEMPERING 20G2R AND 38KhGNM STEELS BY INDUCTION HEATING
376
Optimization of protocrystalline silicon p-type layers for amorphous silicon n–i–p solar cells
377
Optimization of proton exchange membranes and the humidifying conditions to improve cell performance for polymer electrolyte fuel cells
378
Optimization of PSF Membrane Transport Properties with the Use of Porogenic Additive
379
Optimization of PtIr electrocatalyst for PEM URFC
380
Optimization of PTS2·EGFP Expression in CHO and Vero Cells
381
Optimization of pullulan production from hydrolysed potato starch waste by response surface methodology
382
Optimization of pullulanase production in Escherichia coli by regulation of process conditions and supplement with natural osmolytes
383
Optimization of pulping conditions of abaca. An alternative raw material for producing cellulose pulp
384
Optimization of pulse sequences in ultrafast magnetic resonance imaging for the diagnosis of acute abdominal pain caused by gastrointestinal disease
385
Optimization of pulsed laser atom probe (PLAP) for the analysis of nanocomposite Ti–Si–N films
386
Optimization of pulsed laser atom probe (PLAP) for the analysis of nanocomposite Ti–Si–N films
387
Optimization of pulsed microwave heating Original Research Article
388
Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments
389
Optimization of pumping rate and recharge through numerical modeling with special reference to small coral island aquifer
390
Optimization of pump-treat-inject (PTI) design for the remediation of a contaminated aquifer: multi-stage design with chance constraints
391
Optimization of purge cycle for dead-ended anode fuel cell operation
392
Optimization of purine based PDE1/PDE5 inhibitors to a potent and selective PDE5 inhibitor for the treatment of male ED
393
Optimization of PVA clay nanocomposite for ultra-barrier multilayer encapsulation of organic solar cells
394
Optimization of PWR fuel assembly radial enrichment and burnable poison location based on adaptive simulated annealing
395
Optimization of pyrimidinyl- and triazinyl-amines as non-nucleoside inhibitors of HIV-1 reverse transcriptase
396
Optimization of pyrolysis conditions and adsorption properties of bone char for fluoride removal from water
397
Optimization of pyrolysis conditions and adsorption properties of bone char for fluoride removal from water
398
Optimization of pyrolysis conditions of polyurethane for recycling of solid products
399
Optimization of pyrolysis conditions of polyurethane for recycling of solid products
400
Optimization of pyrolysis conditions of scrap tires under inert gas atmosphere
401
Optimization of Pyrolysis Temperature and Particle Size on the Phenols and Hemicellulose Fast Pyrolysis Products in a Tandem Micro-Pyrolyzer
402
Optimization of pyrrolidinone based HIV protease inhibitors
403
Optimization of QCD perturbation theory: Results for image at fourth order Original Research Article
404
Optimization of Q-factor of AFM cantilevers using genetic algorithms
405
Optimization of Q-factor of AFM cantilevers using genetic algorithms
406
Optimization of quadrupolar chromophores for molecular two-photon absorption
407
Optimization of Quantitative Analysis of Cetirizine in Bulk Drug, Dosage Formulations and Human Serum Using Spectrophotometry
408
Optimization of quantization table based on visual characteristics in DCT image coding
409
Optimization of Quantum Cellular Automata Circuits by Genetic Algorithm
410
Optimization of quantum-well infrared detectors integrated with light-emitting diodes
411
Optimization of Queries with User-Defined Predicates
412
Optimization of queuing system via stochastic control
413
Optimization of R&D project portfolios under endogenous uncertainty
414
Optimization of Radial Basis Function neural network employed for prediction of surface roughness in hard turning process using Taguchi’s orthogonal arrays
415
Optimization of radial systems with biomass fueled gas engine from a metaheuristic and probabilistic point of view
416
Optimization of radiation characteristic of time modulated circular geometry using DEWM
417
Optimization of Radiation Dose in Cranial Computed Tomography among Adults: Assessment of Radiation Dose against Image Quality
418
Optimization of Radiation Modes in Asymmetric Planar Slab Optical Waveguides
419
Optimization of radio resource management schemes in UMTS using pricing
420
Optimization of Radiological Protection in Pediatric Patients Undergoing Common Conventional Radiological Procedures: Effectiveness of Increasing the Film to Focus Distance (FFD)
421
Optimization of Radiolytic Degradation of Poly(vinyl alcohol)
422
Optimization of radiosurgery treatmeht planning via mixed integer programming
423
OPTIMIZATION OF RADON MEASUREMENTS WITH ACTIVE CHARCOAL
424
Optimization of railway operations using neural networks
425
Optimization of raisin sorting machine using genetic algorithm
426
Optimization of random diffraction gratings in thin-film solar cells using genetic algorithms
427
Optimization of random number generators: efficient search for high-quality LCGs
428
Optimization of Random Phase Updating Technique for Effective Reduction in PAPR, Using Discrete Cosine Transform
429
Optimization of rapid prototyping parameters for production of flexible ABS object
430
Optimization of Rate Coefficients for Simplified Reaction Mechanisms with Genetic Algorithms
431
Optimization of ratio of active masses in VRLA battery
432
Optimization of rational-powered membership functions using extended Kalman filter
433
Optimization of raw material mixtures in the production of biodiesel from vegetable and used frying oils regarding quality requirements in terms of cold flow properties
434
Optimization of RB5 Effluent Decolorization Efficiency Using KCT Composites - Statistical Approach with ANN Modeling
435
OPTIMIZATION OF RC FRAMES BY AN IMPROVED ARTIFICIAL BEE COLONY ALGORITHM
436
Optimization of RC structure performance in marine environment
437
Optimization of Re solvent extraction from molybdenite roasting dust leaching solution and the performance evaluation of extraction in a multi-stage mixer–settler
438
Optimization of reaction calorimetry with supercritical fluids: A complete term-by-term analysis of the heat flow equation
439
Optimization of reaction condition for solid-state synthesis of LiFePO4-C composite cathodes
440
Optimization of reaction conditions and effect of catalyst type on product distribution in Cyclooctene oxidation
441
Optimization of reaction conditions by RSM and structure characterization of sulfated locust bean gum
442
Optimization of Reaction Conditions for Carboxymethylated Sago Starch
443
Optimization of reaction conditions for grafting of α-cellulose isolated from Lantana camara with acrylamide
444
Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste
445
Optimization of reaction conditions in production of cycloisomaltooligosaccharides using enzyme immobilized in multilayers onto pore surface of porous hollow-fiber membranes
446
Optimization of reaction conditions in selective oxidation of styrene over fine crystallite spinel-type CaFe2O4 complex oxide catalyst
447
Optimization of reaction parameters for 5,5’-methylenebis (salicylaldehyde) synthesis using sonochemical approach
448
Optimization of Reactive Blue 19 Biodegradation by Phanerochaetechrysosporium
449
OPTIMIZATION OF REACTIVE BLUE 19 DECOLORIZATION BY GANODERMA SP. USING RESPONSE SURFACE METHODOLOGY
450
Optimization of reactive extraction of castor seed to produce biodiesel using response surface methodology
451
Optimization of reactive simulated moving bed and Varicol systems for hydrolysis of methyl acetate
452
Optimization of Reactor Temperature and Catalyst Weight for Plastic Cracking to Fuels Using Response Surface Methodology
453
Optimization of reactor volumes for gold cyanidation
454
Optimization of Real Time Application on Mixed Architecture Using AAA Methodology Extension.
455
Optimization of Real Time PCR for Precise Measurement of HER2 Overexpression in Breast Cancer Specimens
456
Optimization of Real Time PCR for Precise Measurement of HER2 Overexpression in Breast Cancer Specimens
457
Optimization of real-time multiserver system with two different channels and shortage of maintenance facilities Original Research Article
458
Optimization of Real-Time Quantitative PCR assay for detection of Echinococcus granulosus in fecal samples
459
Optimization of recirculating laminar air flow in operating room air conditioning systems
460
Optimization of Recombinant Expression of Synthetic Bacterial Phytase in Pichia pastoris Using Response Surface Methodology
461
Optimization of Recombinant Expression of Synthetic Bacterial Phytase in Pichia pastoris Using Response Surface Methodology
462
Optimization of Recombinant Glycoprotein D (gD) based Indirect ELISA for Detection of Antibodies against Bovine Herpesvirus-1
463
Optimization of recombinant human erythropoietin therapy after allogeneic hematopoietic stem cell transplantation
464
Optimization of recombinant hyperthermophilic esterase production from agricultural waste using response surface methodology
465
Optimization of Recombinant Novel Esterase Expression from Extremophiles
466
Optimization of recompression S-CO2 power cycle with reheating
467
Optimization of recreational site selection using multi criteria evaluation and functional relationship diagram (Case study: Miankaleh wildlife sanctuary)
468
Optimization of recreational site selection using multi criteria evaluation and functional relationship diagram (Case study: Miankaleh wildlife sanctuary)
469
Optimization of Redesign Process in Production Systems
470
Optimization of reduced calorie tropical mixed fruits jam
471
Optimization of Reforming Catalyst Distribution in a Cross-Flow Molten Carbonate Fuel Cell with Direct Internal Reforming
472
Optimization of refractive index sampling for multichannel fiber Bragg gratings
473
Optimization of refrigerated shields using multilayer thermal insulation: Cryostats design – analytical solution Original Research Article
474
Optimization of refrigeration system with gas-injected scroll compressor
475
OPTIMIZATION OF REGENERATION PROTOCOLS FOR WHEAT UNDER DROUGHT AND SALT STRESS
476
Optimization of regional hazardous waste management systems: an improved formulation
477
Optimization of reheat pressures in thermal power plants
478
Optimization of reinforced concrete columns according to different environmental impact assessment parameters
479
Optimization of reinforcement content and sliding distance for AlSi7Mg/SiCp composites using response surface methodology
480
Optimization of reinforcement turn-up effect on tyre durability and operating characteristics for racing tyre design
481
Optimization of relativistic mean field model for finite nuclei to neutron star matter
482
Optimization of release locations for small self-stress large stiffness flexure mechanisms
483
Optimization of removal conditions of copper ions from aqueous solutions by Trametes versicolor
484
Optimization of removal of lead from bearing-lead anode slime
485
Optimization of renormalization group flow Original Research Article
486
Optimization of replacement times using imperfect monitoring information
487
Optimization of replacing pork back fat with grape seed oil and rice bran fiber for reduced-fat meat emulsion systems
488
Optimization of Reservoir Management and Operation with Hedging Rules
489
Optimization of Reservoir Operation for Real-Time Flood Control with Emphasis on Forecast Uncertainty: A case study of Dez Reservoir
490
Optimization of Reservoir Operation using a Bioinspired Metaheuristic Based on the COVID-19 Propagation Model
491
Optimization of Residential Spatial Configuration based on Energy Performance, Daylight Brightness, and Thermal Comfort through Pareto Evolutionary Algorithm, Case Study: Mashhad City Climate
492
Optimization of residual welding stresses in austenitic steel piping: prooftesting and numerical simulation of welding and postwelding processes
493
Optimization of residual welding stresses in austenitic steel piping: prooftesting and numerical simulation of welding and postwelding processes Original Research Article
494
OPTIMIZATION OF RESILIENT WHEELS FOR ROLLING NOISE CONTROL
495
Optimization of resistance spot welding on the assembly of refractory alloy 50Mo–50Re thin sheet
496
OPTIMIZATION OF RESISTANCE SPOT WELDING PROCESS USING TAGUCHI METHOD AND A NEURAL NETWORK
497
Optimization of Results for Cracked Teeth Using CAD-CAM System: A Case Series
498
Optimization of retractable structures utilizing bistable compliant mechanism
499
Optimization of retrofitting distortion-induced fatigue cracking of steel bridges using monitored data under uncertainty
500
Optimization of retro-thiorphan for inhibition of endothelin converting enzyme
501
Optimization of retroviral-mediated gene transfer to human NOD/SCID mouse repopulating cord blood cells through a systematic analysis of protocol variables
502
Optimization of reversed-phase microcapillary liquid chromatography for quantitative proteomics
503
Optimization of rewards in single machine scheduling in the rewards-driven systems
504
Optimization of RF power absorption by optimization techniques using the lower hybrid current drive of FTU
505
Optimization of rheological properties of photopolymerizable alumina suspensions for ceramic microstereolithography
506
Optimization of rib-roughened annular gas-coolant channels Original Research Article
507
Optimization of ricotta cheese whey (RCW) fermentation by response surface methodology
508
Optimization of ring-contraction of the meso enedione epoxide for chiral building block synthesis
509
Optimization of RNA Extraction from Rat Pancreatic Tissue
510
Optimization of RNA extraction protocol for Mentha piperita
511
Optimization of RO desalination systems powered by renewable energies Original Research Article
512
Optimization of RO desalination systems powered by renewable energies. Part I: Wind energy Original Research Article
513
Optimization of roasting conditions for high-quality Arabica coffee
514
Optimization of roll cutting in clothing industry
515
Optimization of Roll Shifting Strategy of Alternately Rolling in Hot Strip Mill Original Research Article
516
Optimization of rolling temperature for ZK61 alloy sheets via microstructure uniformity analysis
517
Optimization of rootkit revealing system resources – A game theoretic approach
518
Optimization of rotor shaft shrink fit method for motor using “Robust design”
519
Optimization of roughness, reflectance and photoluminescence for acid textured mc-Si solar cells etched at different HF/HNO3 concentrations
520
Optimization of Route Planning using Simulated Ant Agent System
521
Optimization of RT–PCR for the Detection of Bean leaf roll virus in Plant Hosts and Insect Vectors
522
Optimization of RT-qPCR for Detection of Aichi Virus in Sewage and River Water Samples in Karaj, Iran
523
Optimization of Rubber Compound Design Process Using Artificial Neural Network and Genetic Algorithm
524
Optimization of RuxSey electrocatalyst loading for oxygen reduction in a PEMFC
525
Optimization of S/B in the detection of nuclear fission signatures via different accelerator pulsing modes
526
Optimization of S/B in the detection of nuclear fission signatures via different accelerator pulsing modes
527
Optimization of saccharide fractionation using nanofiltration/ultrafiltration Original Research Article
528
Optimization of Saccharomyces cerevisiae immobilization in bacterial cellulose by ‘adsorption- incubation’ method
529
Optimization of safety audit planning: a case study of process plant in India
530
Optimization of safety equipment outages improves safety
531
Optimization of safety equipment outages improves safety
532
Optimization of SAGD and solvent additive SAGD applications: Comparative analysis of optimization techniques with improved algorithm configuration
533
Optimization of salt, olive oil and pectin level for low-fat frankfurters produced by replacing pork backfat with olive oil
534
Optimization of sample geometries in low-level gamma spectroscopy
535
Optimization of sample geometries in low-level gamma spectroscopy
536
Optimization of sample height in cylindrical geometry for gamma spectrometry measurements
537
Optimization of sample height in cylindrical geometry for gamma spectrometry measurements
538
Optimization of sample number for Weibull function of brittle materials strength
539
Optimization of sample patterns for universal kriging of environmental variables
540
Optimization of Sample Preparation for 1-Hydroxypyrene as a Major Biomarker of Exposure to PAHs Prior to HPLC
541
Optimization of Sample Preparation for Peptide Sequencing by MALDI-TOF Photofragment Mass Spectrometry
542
Optimization of Sample Preparation Procedure for Evaluation of Occupational and Environmental Exposure to Nickel.
543
Optimization of sampling and counting times for gamma-ray spectrometric measurements of short-lived gamma-ray emitters in aqueous samples
544
Optimization of sampling frequency for river water quality assessment according to Italian implementation of the EU Water Framework Directive
545
Optimization of sampling schemes for vegetation mapping using fuzzy classification
546
Optimization of SAW sensors with a structure ZnO–SiO2–Si to detect volatile organic compounds
547
Optimization of sawtooth surface-relief gratings: effects of substrate refractive index and polarization
548
Optimization of scaffold design for bone tissue engineering: A computational and experimental study
549
Optimization of scale and parametrization for terrain segmentation: An application to soil-landscape modeling
550
Optimization of Scan and Reconstruction Parameters for Renal Artery CT Angiography with Iterative Reconstruction at Low kVp Compared with Filtered Back Projection at 120 kVp Acquisition
551
Optimization of scannable latches for low energy
552
Optimization of scanning transmission X-ray microscopy for the identification and quantitation of reinforcing particles in polyurethanes
553
Optimization of scanning transmission X-ray microscopy for the identification and quantitation of reinforcing particles in polyurethanes
554
Optimization of scantiming in abdominal breathhold contrast-enhanced MRA: an empirical guideline
555
Optimization of SC–CO2 extraction of zerumbone from Zingiber zerumbet (L) Smith
556
Optimization of Scheduling Information in a Network-Based Standard IEEE802. 17 and Measurement for Video Transmission
557
Optimization of seawater evaporation plants Original Research Article
558
Optimization of seawater RO systems design
559
Optimization of seawater RO systems design Original Research Article
560
Optimization of secondary ion mass spectrometry for quantitative trace analysis
561
Optimization of secondary suspension of piecewise linear vibration isolation systems
562
Optimization of secondary suspension of piecewise linear vibration isolation systems
563
Optimization of secondary suspension of piecewise linear vibration isolation systems
564
Optimization of second-harmonic generation microscopy
565
Optimization of secretory expression of recombinant hGM-CSF in high cell density cultivation of recombinant Escherichia coli using Taguchi statistical method
566
Optimization of sector geometry of a compact cyclotron by random search and matrixmethods
567
Optimization of sector geometry of a compact cyclotron by random search and matrixmethods
568
Optimization of sediment rating curve coefficients using evolutionary algorithms and unsupervised artificial neural network
569
Optimization of segmented constrained layer damping with mathematical programming using strain energy analysis and modal data
570
Optimization of seismic response of steel structure using negative stiffness damper
571
Optimization of selenium determination in plant samples by hydride generation and axial view inductively coupled plasma atomic emission spectrometry Original Research Article
572
Optimization of selenium status by a single intraperitoneal injection of Se in Se-deficient rat: Possible application to burned patient treatment
573
Optimization of selenylation conditions for Chinese angelica polysaccharide based on immune-enhancing activity
574
Optimization of selenylation conditions for lycium barbarum polysaccharide based on antioxidant activity
575
Optimization of self-compacting filling grout mixtures for repair purposes
576
Optimization of self-organizing polynomial neural networks
577
Optimization of Semi-Active Control of Seismically Excited Buildings Using Genetic Algorithms
578
Optimization of semi-quantitative RT PCR analysis for CPT I gene expression in Rainbow trout (Oncorhynchus mykiss)
579
Optimization of Semiregenerative Catalytic Naphtha Reforming Unit to Enhance Octane Number and Reformate Yield
580
Optimization of Sensitivity and Stability of Gold/Silver bi-Layer Thin Films Used in Surface Plasmon Resonance Chips
581
Optimization of sensitivity encoding with arbitrary k-space trajectories
582
Optimization of sensitivity induced by surface conductivity and sorbed mass in surface acoustic wave gas sensors
583
Optimization of sensor array and detection of stored duration of wheat by electronic nose Original Research Article
584
Optimization of Sensor Based on Molecularly Imprinted Polymeric Nanoparticles for Detection of Dipicolinic Acid as a Biomarker in Bacterial Spores
585
Optimization of separate hydrogen and methane production from cassava wastewater using two-stage upflow anaerobic sludge blanket reactor (UASB) system under thermophilic operation
586
Optimization of separation and detection conditions for comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry analysis of polychlorinated dibenzo-p-dioxins and dibenzofurans
587
Optimization of separation and detection conditions for the multiresidue analysis of pesticides in grapes by comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry
588
Optimization of separation and detection of 6-aminoquinolyl derivatives of amino acids by using reversed-phase liquid chromatography with on line UV, fluorescence and electrochemical detection Original Research Article
589
Optimization of separation and migration behavior of cephalosporins in capillary zone electrophoresis
590
Optimization of separation and migration behavior of chloropyridines in micellar electrokinetic chromatography
591
Optimization of separation in two-dimensional high-performance liquid chromatography by adjusting phase system selectivity and using programmed elution techniques
592
Optimization of series–parallel multi-state systems under maintenance policies
593
Optimization of series–parallel multi-state systems under maintenance policies
594
Optimization of serotonin imprinted polymers and recognition study from platelet rich plasma
595
Optimization of SERS scattering by Ag-NPs-coated filter paper for quantification of nicotinamide in a cosmetic formulation
596
Optimization of SERS-active substrates for near-field Raman spectroscopy
597
Optimization of Service Process in Emergency Depart- ment Using Discrete Event Simulation and Machine Learning Algorithm
598
Optimization of serviceability load combinations for structural steel beam design
599
Optimization of Set-up Conditions for Stability of The Centerless Grinding Process
600
Optimization of Set-Valued Functions
601
Optimization of sewage sludge conditioning and pressure dewatering by statistical modelling
602
Optimization of shale gas field development using direct search techniques and reduced-physics models
603
Optimization of shape and functional structure of buildings as well as heat source utilisation example
604
Optimization of shape and functional structure of buildings as well as heat source utilisation. Partial problems solution
605
Optimization of shape and functional structure of buildings as well as heat source utilization. Basic theory
606
Optimization of sheet metal forming processes by the use of numerical simulations
607
Optimization of shell-and-tube heat exchangers conforming to TEMA standards with designs motivated by constructal theory
608
Optimization of shoot apex based cotton regeneration system
609
Optimization of short micro pin fins in minichannels
610
Optimization of Short Stroke Control Preset for Automatic Width Control of Hot Rolling Mill Original Research Article
611
Optimization of short-haul aircraft schedule recovery problems using a hybrid multiobjective genetic algorithm
612
Optimization of short-term animal behaviour and the currency of time
613
Optimization of short-time gasoline blending scheduling problem with a DNA based hybrid genetic algorithm
614
Optimization of shot peening parameters using Taguchi technique
615
Optimization of Si interface control layer thickness for high-k GaAs metal–insulator–semiconductor structures
616
Optimization of SiC particle distribution during compocasting of A356SiCp composites using D-optimal experiment design
617
OPTIMIZATION OF SIDE LOBE LEVEL AND FIXING QUASI-NULLS IN BOTH OF THE SUM AND DIFFERENCE PATTERNS BY USING CONTINUOUS ANT COLONY OPTIMIZATION (ACO) METHOD
618
Optimization of signal denoising in discrete wavelet transform
619
Optimization of significant factors on the microbial decolorization of azo dye in an aqueous medium by Design of Experiments
620
Optimization of silica content in alumina–silica support for NiMo sulfide to achieve deep desulfurization of gas oil Original Research Article
621
Optimization of silica surface with nanosize holes for immobilization of biomolecules and analysis of their interactions Original Research Article
622
Optimization of silica-based media for antibody purification by protein A affinity chromatography
623
Optimization of silicon microstrip detector design for CLEO III
624
Optimization of silicon microstrip detector design for CLEO III
625
Optimization of silylation using N-methyl-N-(trimethylsilyl)-trifluoroacetamide, N,O-bis-(trimethylsilyl)-trifluoroacetamide and N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide for the determination of the estrogens estrone and 17α-ethinylestradiol
626
OPTIMIZATION OF SIMPLIFIED MODELS MESHED WITH FINITE TRIANGULAR PLATE ELEMENTS
627
Optimization of SIMS analyses performed in the MCsx+ mode by using an in situ deposition of neutral Cs
628
Optimization of SIMS analyses performed in the MCSxþ mode by using an in situ deposition of CS
629
Optimization of SIMS analysis conditions for Na, S, P and N in Cu films
630
Optimization of simulated moving bed and column chromatography for a plasmid DNA purification step and for a chiral separation
631
Optimization of simulated moving bed and Varicol processes
632
Optimization of simulated moving bed chromatography with fractionation and feedback: Part I. Fractionation of one outlet
633
Optimization of simulated moving bed chromatography with fractionation and feedback: Part II. Fractionation of both outlets
634
Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose
635
Optimization of Simulated Ripe Olive Darkening In Presence of Manganese
636
Optimization of simulated systems: OptQuest and alternatives
637
Optimization of simultaneous thermal analysis for fast screening of polycondensation catalysts
638
Optimization of simultaneous thermophilic fermentative hydrogen production and COD reduction from palm oil mill effluent by Thermoanaerobacterium-rich sludge
639
Optimization of SiN thin film for high index contrast planar silica waveguides
640
Optimization of Single Cell Protein Production by Aspergillus niger Using Taguchi Approach
641
Optimization of single mode fibre sensors to detect organic vapours
642
Optimization of single outsourcer–single subcontractor outsourcing relationship under reliability and maintenance constraints
643
Optimization of single SOFC structural design for maximum power
644
Optimization of single-gate carbon-nanotube field-effect transistors
645
Optimization of Single-Phase Induction Motors—Part I: Maximum Energy Efficiency Control
646
Optimization of Single-Phase Induction Motors—Part II: Magnetic and Torque Performance Under Optimal Control
647
Optimization of sintering conditions on the Bi-2223 formation and grain size
648
Optimization of sintering on the structural, electrical and dielectric properties of SnO2 coated CuFe2O4 nanoparticles
649
Optimization of site specific adsorption of oleylamine capped CuO nanoparticles on MWCNTs for electrochemical determination of guanosine
650
Optimization of Six Bar Knee Linkage for Stability of Knee Prosthesis
651
OPTIMIZATION OF SKELETAL STRUCTURAL USING ARTIFICIAL BEE COLONY ALGORITHM
652
OPTIMIZATION OF SKELETAL STRUCTURES USING A HYBRIDIZED ANT COLONY-HARMONY SEARCH- GENETIC ALGORITHM
653
OPTIMIZATION OF SKELETAL STRUCTURES USING IMPROVED GENETIC ALGORITHM BASED ON PROPOSED SAMPLING SEARCH SPACE IDEA
654
Optimization of slabs using object oriented programming
655
Optimization of slider air bearing contours using the combined genetic algorithm-subregion approach
656
Optimization of slurry flocculation and dewatering based on electrokinetic and rheological phenomena
657
Optimization of Sm0.5Sr0.5CoO3−δ–Sm0.2Ce0.8O2−δ composite cathodes fabricated by electrostatic slurry spray deposition
658
Optimization of small molecule agonists of the thrombopoietin (Tpo) receptor derived from a benzo[a]carbazole hit scaffold
659
Optimization of small-particle plasma-sprayed alumina coatings using designed experiments
660
Optimization of small-particle plasma-sprayed alumina coatings using designed experiments
661
Optimization of Small-Scale Trigeneration Systems in Terms of Levelized Total Costs and Carbon Tax Using a Matrix Modeling Approach
662
Optimization of SMES and superconducting magnets with a derivative free deterministic method Original Research Article
663
Optimization of smoothing process—the method to improve calibration in voltammetry: Part I. Simulated voltammograms
664
Optimization of SnO2 screen-printing inks for gas sensor applications
665
Optimization of soaking conditions for the production of seaweed (Kappaphycus alverazii) paste using response surface methodology
666
Optimization of sodium carbonate texturization on large-area crystalline silicon solar cells
667
Optimization of sodium dedecyl sulfate (SDS) addition coupled with adenosine triphosphate (ATP) regeneration for glutathione overproduction in high density cultivation of Candida utilis
668
Optimization of sodium loading on zeolite support for catalyzed transesterification of triolein with methanol
669
Optimization of soft magnetic properties in nanoperm type alloys
670
Optimization of software components selection for component-based software system development
671
Optimization of Soil Aquifer Treatment by Chemical Oxidation with Hydrogen Peroxide Addition
672
Optimization of soil-adjusted vegetation indices
673
Optimization of solar absorbing three-layer coatings
674
Optimization of Solar Absorption Chillers by Differential Evolution Algorithm Method
675
Optimization of Solar Absorption Cooling System Considering Hourly Analysis
676
Optimization of solar adsorption refrigeration system using experimental and statistical techniques
677
Optimization of Solar Cooling Systems with Simulation Modeling
678
Optimization of solar crop drying
679
Optimization of solar DHW system including PCM media
680
Optimization of Solar Disinfection Considering Log Reduction Values (LRV) for Treated Urban Wastewater
681
Optimization of solar district heating systems: seasonal storage, heat pumps, and cogeneration
682
Optimization of solar flat collector inclination Original Research Article
683
Optimization of solar photocatalytic degradation conditions of bisphenol A in water using titanium dioxide
684
Optimization of solar pond electrical power generation system
685
Optimization of solar powered hydrogen production using photovoltaic electrolysis devices
686
Optimization of solar systems using artificial neural-networks and genetic algorithms
687
Optimization of solar water heating systems through water replenishment
688
optimization of solar-photocatalytic degradation of polychlorinated biphenyls using photocatalyst (nd/pd/tio2) by taguchi technique and detection by solid phase nano extraction
689
Optimization of solar-powered reverse osmosis desalination pilot plant using response surface methodology Original Research Article
690
OPTIMIZATION OF SOLDER PASTE PRINTING PARAMETERS USING DESIGN OF EXPERIMENTS (DOE)
691
Optimization of Solder Paste Printing Parameters Using Design of Experiments (DOE)
692
Optimization of sol–gel/pyrolysis routes to silicon oxycarbide glasses
693
Optimization of solid phase extraction clean up and validation of quantitative determination of carbazochrome sodium sulfonate in human plasma by liquid chromatography-electrospray ionization tandem mass spectrometry
694
Optimization of solid phase extraction clean up and validation of quantitative determination of corticosteroids in urine by liquid chromatography–tandem mass spectrometry Original Research Article
695
Optimization of Solid Phase Extraction for Trace Determination of Cobalt (II) Using Chromosorb 102 in Biological Monitoring
696
Optimization of solid phase microextraction coatings for liquid chromatography mass spectrometry determination of neurotransmitters
697
Optimization of solid phase microextraction for non-lethal in vivo determination of selected pharmaceuticals in fish muscle using liquid chromatography–mass spectrometry
698
Optimization of Solid State Anaerobic Digestion by inoculum recirculation: The case of an existing Mechanical Biological Treatment plant
699
Optimization of Solid Waste Collection and Transportation System by Use of The TransCAD: A Case Study
700
optimization of solid waste collection system in a tourism destination
701
Optimization of solid-phase clean-up prior to liquid chromatographic analysis of ochratoxin A in roasted coffee
702
Optimization of solid-phase extraction and liquid chromatography–tandem mass spectrometry for the determination of domoic acid in seawater, phytoplankton, and mammalian fluids and tissues Original Research Article
703
Optimization of solid-phase extraction and solid-phase microextraction for the determination of α- and β-endosulfan in water by gas chromatography–electron-capture detection
704
Optimization of solid-phase extraction for a liquid chromatographic–tandem mass spectrometric general unknown screening procedure by means of computational techniques
705
Optimization of solid-phase extraction for a liquid chromatographic–tandem mass spectrometric general unknown screening procedure by means of computational techniques
706
Optimization of solid-phase extraction using artificial neural networks and response surface methodology in combination with experimental design for determination of gold by atomic absorption spectrometry in industrial wastewater samples
707
Optimization of solid-phase extraction using artificial neural networks in combination with experimental design for determination of resveratrol by capillary zone electrophoresis in wines
708
Optimization of solid-phase microextraction conditions for gas chromatographic determination of ethanol and other volatile compounds in blood
709
Optimization of solid-phase microextraction conditions for the determination of triclosan and possible related compounds in water samples
710
Optimization of solid-phase microextraction for the gas chromatographic–mass spectrometric determination of synthetic musk fragrances in water samples
711
Optimization of solid-phase microextraction of volatile phenols in water by a polyaniline-coated Pt-fiber using experimental design Original Research Article
712
Optimization of solid-state diffusion bonding of Hastelloy C-22 for micro heat exchanger applications by coupling of experiments and simulations
713
Optimization of solid-state medium for the production of inulinase by Aspergillus ficuum JNSP5-06 using response surface methodology
714
Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder
715
Optimization of solution growth and characterization of monomethylurea crystals
716
Optimization of solution Kadomtsev-Petviashvili equation by using hompotopy methods
717
Optimization of Solution Stiff Differential Equations Using MHAM and RSK Methods
718
Optimization of solvent bar microextraction combined with gas chromatography for preconcentration and determination of methadone in human urine and plasma samples
719
Optimization of solvent bar microextraction combined with gas chromatography mass spectrometry for preconcentration and determination of tramadol in biological samples
720
Optimization of Solvent Extraction Parameters for Separation of Samarium and Lutetium from Acidic Media Using Response Surface Methodology (RSM)
721
Optimization of solvent media to solubilize TEV protease using response surface method
722
Optimization of solvent resistant nanofiltration membranes prepared by the in-situ diamine crosslinking method
723
Optimization of solvothermally synthesized ZIF67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution
724
Optimization of some experimental parameters in the electro membrane extraction of chlorophenols from seawater
725
Optimization of some factors affecting the performance of query expansion
726
Optimization of some instrumental factors in diffuse reflectance infrared Fourier transform spectroscopy
727
Optimization of some panel manufacturing parameters for the best bonding strength of plywood
728
Optimization of some parameters of stirred mill for ultra-fine grinding of refractory Au/Ag ores
729
Optimization of some parameters on agglomeration performance of Zonguldak bituminous coal by oil agglomeration
730
Optimization of some process variables in mass transfer kinetics of osmotic dehydration of pineapple slices
731
Optimization of sonochemical degradation of tetracycline in aqueous solution using sono-activated persulfate process
732
Optimization of Sorting Conditions for the Selection of Stable, High-Producing Mammalian Cell Lines
733
Optimization of Sorting Conditions for the Selection of Stable, High-Producing Mammalian Cell Lines
734
Optimization of Sound Transmission Loss of a Composite Rectangular Plate with Infinite Baffle
735
OPTIMIZATION OF SOURCE AND RATE OF SOIL APPLIED SILICON FOR IMPROVING THE GROWTH OF WHEAT
736
Optimization of sourdough fermentation with Lactobacillus brevis and bakerʹs yeast Original Research Article
737
Optimization of Soy-based Media for the Production of Biologically Active Exopolysaccharides by Medicinal Mushroom Trametes versicolor
738
Optimization of soybean hull acid hydrolysis and its characterization as a potential substrate for bioprocessing
739
Optimization of soy-biodiesel combustion in a modern diesel engine
740
Optimization of Space Station components using design code CometBoards Original Research Article
741
Optimization of spare capacity in self-healing multicast ATM network using genetic algorithm
742
Optimization of Spark Ignition Engine Performance using a New Double Intake Manifold: Experimental and Numerical Analysis
743
Optimization of Spatial Association Rule Mining using Hybrid Evolutionary algorithm
744
OPTIMIZATION OF SPECIFIC DIE PROFILES IN THIN WALLED TUBE EXTRUSION
745
Optimization of Specific Power of Surface Mounted Axial Flux Permanent Magnet Brushless DC Motor for Electrical Vehicle Application
746
Optimization of specific rate of heat pumping in combined heat pump cycles
747
Optimization of specific rating for wind turbine arrays coupled to compressed air energy storage
748
Optimization of specimen preparation of thin cell section for AFM observation
749
Optimization of specimen preparation of thin cell section for AFM observation
750
Optimization of spectral functions of Dirichlet–Laplacian eigenvalues
751
Optimization of spectrophone performance for quartz-enhanced photoacoustic spectroscopy
752
Optimization of spent sulfite liquor fermentation
753
Optimization of Spindle loading and Tool Wear for CNC Turning Machine by Using Intelligent System
754
Optimization of spiroimidazolidinone derivatives synthesis on solid phase using SynPhase™ Lanterns
755
Optimization of sponge iron production in direct reduction plants with the KIPEX method
756
Optimization of Spongiochloris sp. biomass production in the abattoir digestate
757
Optimization of spot-welded structures
758
Optimization of spray drying conditions for lulo (Solanum quitoense L.) pulp
759
Optimization of Spray Drying Conditions for Production of Ice Cream Mix Powder Flavored With Black Mulberry Juice
760
Optimization of spray parameters in the fabrication of SnO2 layers using electrostatic assisted deposition technique
761
Optimization of Spray Pulse Reactor Conditions Used for Dehydrogenation of Liquid Organic Hydrides by Using Response Surface Methodology
762
Optimization of spray pyrolysis zirconia coatings on aluminized steel
763
Optimization of spray-dried hyaluronic acid microspheres to formulate drug-loaded bone substitute materials
764
Optimization of sprayed lime amount in the semi-dry scrubbing system of MSWI
765
Optimization of spread configuration for seismic data acquisition through numerical modeling in tectonically complex areas: a case study from Badarpur anticline, Cachar, India
766
Optimization of spreading and cutting sequencing model in garment manufacturing
767
Optimization of sputtering parameters for Ni–Cr alloy deposition on copper foil as embedded thin film resistor
768
Optimization of sputtering parameters for Smsingle bondCo thin films using design of experiments
769
Optimization of squeeze cast parameters of LM6 aluminium alloy for surface roughness using Taguchi method
770
Optimization of Sr content in layered SmBa1–xSrxCo2O5+δ perovskite cathodes for intermediate-temperature solid oxide fuel cells
771
Optimization of stability-constrained geometrically nonlinear shallow trusses using an arc length sparse method with a strain energy density approach
772
Optimization of Stack Emission Parameters Using Gaussian Plume Model
773
Optimization of stack filters based on mirrored threshold decomposition
774
Optimization of stacking high-density quantum dot molecules for photovoltaic effect
775
Optimization of Stakeholders’ Interaction in the Lean Management Process via a Dynamic Game Theory Approach: A Case Study of the National Southern Oilfields Company
776
Optimization of stamping processes aiming at maximal process stability
777
Optimization of Stand-alone Hybrid PV/Wind/Fuel-Cell System Considering Reliability Indices Using Cuckoo Optimization and Firefly Algorithm
778
Optimization of Starch Biopolymer Enriched with Chitosan Containing Rosemary Essential Oil and its Application in Packaging of Peanuts
779
Optimization of starch oleate derivatives from native corn and hydrolyzed corn starch by response surface methodology
780
Optimization of startup and shutdown operation of simulated moving bed chromatographic processes
781
Optimization of static output feedback using substitutive LMI formulation
782
Optimization of statistical sample sizes in simulation
783
Optimization of Stator Structure of Transverse Flux Motor Original Research Article
784
Optimization of stay cables in cable-stayed bridges using finite element, genetic algorithm, and B-spline combined technique
785
Optimization of steady flow heat pumps
786
Optimization of steady state recycling parameters utilizing polarimetry in chiral separations
787
Optimization of steam treatment as a method for upgrading rice straw as feeds
788
Optimization of Steam Treatment Conditions for Improving the Nutritive Value of Date Leaves
789
Optimization of Steam-Over-Solvent Injection in Fractured Reservoirs (SOS-FR) method using hybrid techniques: Testing cyclic injection case
790
OPTIMIZATION OF STEEL FRAMES WITH RELIABILITY CONSTRAINT UNDER THE EFFECT OF FIRE LOAD USING COLLIDING BODIES OPTIMIZATION ALGORITHM
791
OPTIMIZATION OF STEEL MOMENT FRAME BY A PROPOSED EVOLUTIONARY ALGORITHM
792
Optimization of Steel Production to Improve Lifecycle Environmental Performance
793
Optimization of steel structures using distributed simulated annealing algorithm on a cluster of personal computers
794
Optimization of STEM tomography acquisition — A comparison of convergent beam and parallel beam STEM tomography
795
Optimization of STEM tomography acquisition — A comparison of convergent beam and parallel beam STEM tomography
796
Optimization of stir bar sorptive extraction applied to the determination of pesticides in vinegars
797
Optimization of Stir Casting Method of Aluminum Matrix Composite (AMC) for the Hardness Properties by Using Taguchi Method
798
Optimization of Stirrer Designs in a Reverberation Chamber
799
OPTIMIZATION OF STIRRER WITH VARIOUS PARAMETERS IN REVERBERATION CHAMBER
800
Optimization of stochastic networks using simulated annealing for the storage and recalling of compressed images using SOM
801
Optimization of stochastic networks using simulated annealing for the storage and recalling of compressed images using SOM
802
Optimization of stomatal conductance for maximum carbon gain under dynamic soil moisture
803
Optimization of stone-quarry technologies
804
Optimization of Strain Distribution in the Roll Forming Process Using the Desirability Function and Finite Element Methods
805
Optimization of strain field distribution for generation of compound curve surfaces using line heating technique
806
Optimization of strength by microstructural refinement of MgY2Zn1 alloy during extrusion and ECAP processing
807
Optimization of Streptokinase Mutant Protein Purification Method using Affinity Chromatography Technique
808
Optimization of stress modes by energy compatibility for 4-node hybrid quadrilaterals
809
Optimization of stress relief heat treatment of PHWR pressure tubes (Zr–2.5Nb alloy)
810
Optimization of stress-strain behavior parameters by genetic algorithms method: Application to soft-matrix two-phase alloys
811
Optimization of structural combinations on the performance of a PEMFCʹs MEA
812
Optimization of structural designs for a safe failure pattern: layered material systems
813
Optimization of structural dynamic behaviour based on effective modal parameters
814
Optimization of structural parameters for elliptical cross-section spiral equal-channel extrusion dies based on grey theory
815
OPTIMIZATION OF STRUCTURE AND COLD STRENGTH FOR STRIP OF STRENGTH CATEGORY K52
816
Optimization of structure and material properties for solids composed of softening material
817
Optimization of structure and power supply conditions of catalytic gas sensor
818
Optimization of structure and preparing conditions of HTSC (Bi0.8Pb0.2)2(Sr1-yBay)2Ca2Cu3O10+δ to Obtain the Highest Tc
819
Optimization of Structure of Solar Cells Based on Lead Perovskites (CH3NH3PbX3, X: I, Br) Via Numerical Simulation
820
Optimization of structured catalyst carriers for VOC combustion
821
Optimization of structures in frictional contact
822
Optimization of structures with nonlinear behavior using equivalent loads Original Research Article
823
Optimization of structures with uncertain constraints based on convex model and satisfaction degree of interval Original Research Article
824
Optimization of struvite crystallization protocol for pretreating the swine wastewater and its impact on subsequent anaerobic biodegradation of pollutants
825
Optimization of sublimation growth of SiC bulk crystals using modeling
826
Optimization of sublimation growth of SiC bulk crystals using modeling
827
Optimization of Submerged Arc Welding process Parameters Using PCA-Based Taguchi Approach.
828
Optimization of submerged culture condition for the production of mycelial biomass and exopolysaccharides by Agrocybe cylindracea
829
Optimization of Submerged Culture Conditions for the Production of Mycelial Biomass and Exopolysaccharides from Lignosus rhinocerus
830
Optimization of submerged culture for the production of Lentinula edodes mycelia biomass and amino acid composition by different temperatures
831
Optimization of succinoglycan hydrocolloid production by Agrobacterium radiobacter grown in sugar beet molasses and investigation of its physicochemical characteristics
832
Optimization of sugarcane bagasse cellulose acetylation
833
Optimization of Sulphate-Reducing Bacteria for Treatment of Heavy Metals-Containing Laboratory Wastewater on Anaerobic Reactor
834
Optimization of supercritical carbon dioxide extraction of antioxidants from roasted wheat germ based on yield, total phenolic and tocopherol contents, and antioxidant activities of the extracts
835
Optimization of supercritical carbon dioxide extraction of essential oil from spearmint (Mentha spicata L.) leaves by using Taguchi methodology
836
Optimization of supercritical carbon dioxide extraction of Passiflora seed oil
837
Optimization of supercritical carbon dioxide extraction of silkworm pupal oil applying the response surface methodology
838
Optimization of supercritical carbon dioxide treatment for the inactivation of the natural microbial flora in cubed cooked ham
839
Optimization of supercritical CO2 extraction of different anatomical parts of lovage (Levisticum officinale Koch.) using response surface methodology and evaluation of extracts composition
840
Optimization of supercritical CO2 extraction of oleoresin from black pepper (Piper nigrum L.) and antioxidant capacity of the oleoresin
841
Optimization of Supercritical Co2 Extraction of Swietenia Mahagoni Seed by Response Surface Methodology
842
Optimization of supercritical CO2 extraction of Thymbra spicata oil
843
Optimization of supercritical CO2 process for the concentration of tocopherol, carotenoids and chlorophylls from residual olive husk
844
Optimization of supercritical dimethyl carbonate (SCDMC) technology for the production of biodiesel and value-added glycerol carbonate
845
Optimization of supercritical dimethyl carbonate method for biodiesel production
846
Optimization of supercritical extraction of nimbin from neem seeds in presence of methanol as co-solvent
847
Optimization of supercritical fluid extraction combined with dispersive liquid–liquid microextraction as an efficient sample preparation method for determination of 4-nitrotoluene and 3-nitrotoluene in a complex matrix
848
Optimization of supercritical fluid extraction for polychlorinated biphenyls from sediments
849
Optimization of supercritical fluid extraction of pesticide residues in soil by means of central composite design and analysis by gas chromatography–tandem mass spectrometry
850
Optimization of supercritical methanol reactive extraction by Response Surface Methodology and product characterization from Jatropha curcas L. seeds
851
Optimization of Superimposed Residual Stress Components to Improve Fatigue Life of Work Roll in Hot Rolling Process Using Artificial Neural Network and Genetic Algorithm
852
Optimization of superplastic hydroforming process of Aluminium alloy 5083
853
Optimization of superplasticiser and viscosity modifying agent in self compacting mortar
854
Optimization of superprotonic acid salts for fuel cell applications
855
Optimization of supersonic nozzle flow for titanium dioxide thin-film coating by aerosol deposition
856
Optimization of supervised self-organizing maps with genetic algorithms for classification of urinary calculi
857
Optimization of supply chain finance based on Stackelberg model
858
Optimization of support positions to maximize the fundamental frequency of structures
859
Optimization of surface charge transfer processes on rutile TiO2 nanorods photoanodes for water splitting
860
Optimization of surface coating condition using vapor form of alkanethiol on Cu nano powders for the application of oxidation prevention
861
Optimization of surface condensate production from natural gases using artificial intelligence
862
Optimization of surface morphology and electrical parameters of Tl-Ba-Ca-Cu-O thin films for high frequency devices
863
Optimization of surface quality and shell porosity in low carbon steel hollow spheres produced by powder metallurgy
864
Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network
865
Optimization of surface treatment to enhance fiber–matrix interface and performance of composites
866
Optimization of Surface Wave Identification and Measurement
867
Optimization of Surfactin Production by Bacillus subtilis ATCC 6633 in a Miniaturized Bioreactor
868
Optimization of Surge Arrester’s Location
869
Optimization of surgical care
870
Optimization of surgical strategy in parasagittal meningiomas. A 1605-case study
871
Optimization of survival and spore formation of Paenibacillus polymyxa SQR-21 during bioorganic fertilizer storage
872
Optimization of Suspension System of Sport Car in Three Dimensional Reactions Space
873
Optimization of Sustainable Vehicle Routing Problem Taking into Account Social Utility and Employing a Strategy with Multiple Objectives
874
Optimization of Sustainable-Robust Biofuel Supply Chain under Uncertainty
875
Optimization of sustained release aceclofenac microspheres using response surface methodology
876
Optimization of sustained release matrix tablet of metoprolol succinate using central composite design
877
Optimization of SW480 Colon Cancer Cells Transfection with Lipofectamine 2000
878
Optimization of Swelling Percentage of Poly(AAm-co-AA) in BaCl2 Salt Solution Using Response Surface Methodology (RSM)
879
Optimization of Swirling Flow Energy Parameters on the Velocity Profile after Local Obstacle by Firefly Algorithm
880
Optimization of switching frequencies in the limited-pool randomspace vector PWM strategy for inverter-fed drives
881
Optimization of symbol mappings for bit-interleaved coded Modulation with iterative decoding
882
Optimization of Synchronization Delay in Latissimus Dorsi Dynamic Cardiomyoplasty
883
Optimization of synthesis and characterization of nanosilica produced from rice husk (a common waste material)
884
Optimization of synthesis condition and electrode fabrication for spinel LiMn2O4 cathode
885
Optimization of synthesis condition and the electrochemical properties of LiVMO6−δ (M=Mo or W) as candidate positive electrode material for lithium batteries
886
Optimization of synthesis conditions for preparation of ceramic (A-type zeolite) membranes in dehydration of ethylene glycol
887
Optimization of synthesis conditions for rare-earth titanate based oxygen ion conductors
888
Optimization of Synthesis of Expandable Polystyrene by MultiStage Initiator Dosing
889
Optimization of synthesis of fatty acid methyl esters catalyzed by lipase B from Candida antarctica immobilized on hydrophobic supports
890
Optimization of synthesis of upconversion luminescence material NaYF4:Er3+,Yb3+ nanometer-phosphor by low-temperature combustion synthesis method
891
Optimization of synthesis parameters of mesoporous silica sol–gel thin films for application on 2024 aluminum alloy substrates
892
Optimization of Synthesis Procedure for NaX Zeolite by Taguchi Experimental Design and its Application in CO2 Adsorption
893
Optimization of synthesis time for high performance of NaA zeolite membranes synthesized via autoclave for water–ethanol separation Original Research Article
894
Optimization of synthesizing glucose 1-phosphate by sodium tripolyphosphate as a phosphorus acylating agent using response surface methodology
895
Optimization of Synthetic Glucose Oxidase Gene Using A Recombinant Combination Strategy in Pichia Pastoris GS115
896
Optimization of Synthetic Jet Position for Heat Transfer Enhancement and Temperature Uniformity of a Heated Wall in Micro-Channels
897
Optimization of system reliability in multi-factory production networks by maintenance approach
898
Optimization of system reliability in the presence of common cause failures
899
Optimization of system reliability in the presence of common cause failures
900
Optimization of systems with multiple performance measures via simulation: Survey and recommendations
901
Optimization of Tajoura MSF desalination plant Original Research Article
902
Optimization of tall guyed masts using genetic algorithms
903
Optimization of tandem queue systems with finite buffers
904
Optimization of tandem-structured dye-sensitized solar cell
905
Optimization of Tangential Cutting Force in Turning Operation in Machining of Unidirectional Glass Fiber Reinforced Plastics
906
Optimization of Tangential Cutting Force in Turning Operation in Machining of Unidirectional Glass Fiber Reinforced Plastics
907
Optimization of tank and flat-plate collector of solar water heating system for single-family households to assure economic efficiency through the TRNSYS program
908
Optimization of tapered end design for FRP strips bonded to RC beams
909
Optimization of Tapering Angle of Flow Channels of Pemfuel Cell: A Numerical Study
910
Optimization of target speeds of high-speed railway trains for traction energy saving and transport efficiency improvement
911
Optimization of tartaric/sulphuric acid anodizing process using Doehlert design
912
Optimization of Taxane Binding to Microtubules: Binding Affinity Dissection and Incremental Construction of a High-Affinity Analog of Paclitaxel Original Research Article
913
Optimization of TCP/HAP ratio for better properties of calcium phosphate scaffold via selective laser sintering
914
Optimization of teacher volunteer transferring problems using greedy genetic algorithms
915
Optimization of technical trading strategies and the profitability in security markets
916
Optimization of techniques for the maximal detection and quantification of Alzheimer’s-related neuropathology with digital imaging
917
Optimization of Technological Qualities of Photovoltaic Cells Based on Absorber Metamaterial (SRRs) Resonators
918
Optimization of Technology Mastery as Part of Increasing Employee Performance in the E-Commerce Industry
919
Optimization Of Telescopic Booms In The Mobile Cranes
920
Optimization of Temperature and Force Adaptation Algorithm in Hot Strip Mill Original Research Article
921
Optimization of temperature and light intensity for improved photofermentative hydrogen production using Rhodobacter capsulatus DSM 1710
922
Optimization of temperature and supporting electrolyte for ammonium removal using bioelectrochemical systems
923
Optimization of Temperature Level to Enhance Worker Performance in Automotive Industry
924
Optimization of temperature-controlled ionic liquid dispersive liquid phase microextraction combined with high performance liquid chromatography for analysis of chlorobenzenes in water samples
925
Optimization of temperature-controlled ionic liquid homogenous liquid phase microextraction followed by high performance liquid chromatography for analysis of diclofenac and mefenamic acid in urine sample
926
Optimization of temperature-dependent functionally graded material bodies
927
Optimization of temporal basis functions in dynamic PET imaging
928
Optimization of temporal basis functions in dynamic PET imaging
929
Optimization of Temporal Filters for Constructing Robust Features in Speech Recognition
930
Optimization of tensegrity structures
931
Optimization of Tensile and Shear Properties of Concrete Reinforced with Polypropylene and Glass Fibers Using Taguchi Method
932
Optimization of tensile properties of evaporative pattern casting process through Taguchiʹs method
933
Optimization of Tensile Strength of Butt Joint Weldment on Mild Steel Plate Using Response Surface Methodology
934
Optimization of test and maintenance intervals based on risk and cost
935
Optimization of testing parameters on the wear behaviour of metal matrix composites based on the Taguchi method
936
Optimization of Tetraphenylsilane-Based Blue Organic Light-Emitting Devices with Copper Phthalocyanine
937
Optimization of textured structure on crystalline silicon wafer for heterojunction solar cell
938
Optimization of the 3 m TGM beamline, at CAMD, for constant initial state spectroscopy
939
Optimization of the 3 m TGM beamline, at CAMD, for constant initial state spectroscopy
940
Optimization of the 4-aryl group of 4-aryl-pyridine glucagon antagonists: development of an efficient, alternative synthesis
941
Optimization of the activated sludge anoxic reactor configuration as a means to control nutrient removal kinetically
942
Optimization of the active-layer morphology with a non-halogenic solvent for bulk-heterojunction polymer solar cells
943
OPTIMIZATION OF THE ACTIVITIES OF TOURISM ENTERPRISES
944
Optimization of the activity of CaO/Al2O3 catalyst for biodiesel production using response surface methodology Original Research Article
945
Optimization of the Adsorption of Pb(II) and Zn(II) onto the EDTA-Modified MnO2/Chitosan/Fe3O4 Nanocomposite from an Aqueous Solution Using RSM According to the CCD Method
946
Optimization of the aerodynamic configuration of a tubular projectile based on blind Kriging
947
Optimization of the Al–Cr–Zn system at 460 C
948
Optimization of the allocation of dynamic vehicle routing with considering traffic
949
Optimization of the Allowable Speed on Iran’s Freeways to Reduce Violations and Accidents, Using Zero-Truncated Poisson Regression Model
950
Optimization of the amount of edging to increase rolling yields in a plate mill
951
Optimization of the amount of Nafion in multi-walled carbon nanotube/Nafion composites as Pt supports in gas diffusion electrodes for proton exchange membrane fuel cells
952
Optimization of the anaerobic treatment of a waste stream from an enhanced oil recovery process
953
Optimization of the Analysis of Almond DNA Simple Sequence Repeats (SSRs)Through Submarine Electrophoresis Using Different Agaroses and Staining Protocols
954
Optimization of the analytical extraction of polyamines from milk
955
Optimization of the analytical performance of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/F)
956
Optimization of the Angle Measure Technique for image analytical sampling of particulate matter
957
Optimization of the angle of attack of delta-winglet vortex generators in a plate-fin-and-tube heat exchanger
958
Optimization of the Antibody CH3 Domain by Residue Frequency Analysis of IgG Sequences
959
Optimization of the Antifungal Activity of Essential Oil Isolated from Aerial Parts of Thymus kotschyanus Boiss Hohen (Lamiaceae)
960
Optimization of the antifungal metabolite production in Streptomyces libani isolated from northern forests soils in Iran
961
Optimization of the antioxidant capacity of thyme (Thymus vulgaris L.) extracts: Management of the convective drying process assisted by power ultrasound Original Research Article
962
Optimization of the Arrangement of Solar Collectors with Large-Capacity Semicylindrical Heat Receivers
963
Optimization of the arsenazo-III method for the determination of uranium in water and plant samples
964
Optimization of the as-deposited 1.54 μm photoluminescence intensity in a-SiOx:H〈Er〉
965
Optimization of the atmospheric pollution monitoring network at Santiago de Chile
966
Optimization of the availability of the core CXRS diagnostics for ITER
967
Optimization of the AZO dyes decoloration process through neural networks: Determination of the H2O2 addition critical point
968
Optimization of the Ba+2 uptake in the formation process of hydrogels using central composite design: Kinetics and thermodynamic studies of malachite green removal by Ba-alginate particles
969
Optimization of the ballistic guide design for the SNS FNPB 8.9 إ neutron line
970
Optimization of the ballistic guide design for the SNS FNPB 8.9 إ neutron line
971
Optimization of the basal medium for improving production and secretion of taxanes from suspension cell culture of Taxus baccata L
972
Optimization of the beam geometry for the cold neutron tomography facility at the new neutron source in Munich
973
Optimization of the beta-globin LCR and promoter elements for lentiviral vector-encoded the beta-globin transgene expression in beta-thalassemic mice
974
Optimization of the binding properties of PNA-(5′)-DNA chimerae
975
Optimization of the biocide properties of chitosan for its application in the design of active films of interest in the food area
976
Optimization of the Biodecolorization Activity of the Ayapers dye Removal by Halmonas sp. Isolated from Urmia Lake
977
Optimization of the biological component of a bioelectrochemical cell
978
Optimization of the biomass production of oil algae Chlorella minutissima UTEX2341
979
Optimization of the Black-Scholes Equation with the Numerical Method of Local Expansion to Minimize Risk Coverage
980
Optimization of the buffer system of micellar electrokinetic capillary chromatography for the separation of the active components in Chinese medicine ‘SHUANGDAN’ granule by genetic algorithm Original Research Article
981
Optimization of the capillary zone electrophoresis method for Huperzine A determination using experimental design and artificial neural networks
982
Optimization of the Carbon Dioxide Absorption (CDA) and Surface Erosion (SE) of Potassium Superoxide Based Respiratory Air Tablets Using the Taguchi Method
983
Optimization of the catalytic ozonation process using copper oxide nanoparticles for the removal of benzene from aqueous solutions
984
Optimization of the cathode block shape of an aluminum electrolysis cell
985
Optimization of The Cell Aggregates Method for Isolation and Purification of Human Granulosa Cells from Follicular Fluid
986
Optimization of the Cellulase Free Xylanase Production by Immobilized Bacillus Pumilus
987
Optimization of the ceramization process for the production of three-dimensional biomorphic porous SiC ceramics by chemical vapor infiltration (CVI)
988
Optimization of the chemical vapor deposition process for carbon nanotubes fabrication
989
Optimization of the chemical vapor deposition process for carbon nanotubes fabrication
990
Optimization of the chemical vapor deposition process for fabrication of carbon nanotube/Al composite powders
991
Optimization of the chicken breast cooking process Original Research Article
992
Optimization of the chiral separation of a Ca-sensitizing drug on an immobilized polysaccharide-based chiral stationary phase: Case study with a preparative perspective
993
Optimization of the choice of the system electric drive-device—transmission for mechatronic applications
994
Optimization of the chopping process using at-line human evaluations and response surface methodology
995
Optimization of the chromatographic conditions for the determination of hormones by gas chromatography with mass spectrometry detection Original Research Article
996
Optimization of the class-selective extraction of triazines from aqueous samples using a molecularly imprinted polymer by a comprehensive approach of the retention mechanism
997
Optimization of the coagulation–flocculation treatment: influence of rapid mix parameters
998
Optimization of the coal flotation procedure using the Plackett–Burman design methodology and kinetic analysis
999
Optimization of the coating layer for the measurement of ammonia by diffusion denuders
1000
Optimization of the coating parameters for micro-arc oxidation of Cp-Ti
