بر اساس عنوان

1
Technical note: Optimizing the thermohydraulic performance of flat-plate solar air heaters operating with fixed+45 degree rulevariable pumping power
2
Technical note: Performance study of a linear Fresnel concentrating solar device
3
Technical note: Performance study of the haamer gelatin pendulum current meter
4
Technical note: Revisiting the geometric theorems for volume averaging
5
Technical note: Simple models for estimating the total, diffuse, direct and normal solar irradiation in Bahrain
6
Technical note: Specific PCR amplification of protozoal 18S rDNA sequences from DNA extracted from ruminal samples of cows
7
Technical note: Techniques to obtain improved predictions of global radiation from sunshine duration
8
Technical note: the integral form of the transport equation with a moving boundary
9
Technical note: Time-resolved immunofluorometric assay for growth hormone in ruminants
10
Technical note: Use of near infrared reflectance spectroscopy to assess nitrogen and carbon fractions in dairy cow feces
11
Technical note: validation of a motion analysis system for measuring the relative motion of the intermediate component of a tripolar total hip arthroplasty prosthesis
12
Technical Note:Aquifer Parameter Estimation from Surface Resistivity Data
13
TECHNICAL NOTEA note on lead time and distributional assumptions in continuous review inventory models
14
Technical notes on endothelial progenitor cells: Ways to escape from the knowledge plateau
15
Technical Notes on the Near Surface Experiments of Submerged Submarine
16
Technical Notes on the Near Surface Experiments of Submerged Submarine
17
Technical notes on thoracic sympathectomy for essential hyperhidrosis: Reply
18
Technical optimisation of nitrate removal from ground water by electrodialysis using a pilot plant Original Research Article
19
Technical optimization of a batch olive wash wastewater treatment membrane plant Original Research Article
20
Technical optimization of a dual ultrafiltration and nanofiltration pilot plant in batch operation by means of the critical flux theory: A case study
21
Technical optimization of nitrate removal for groundwater by ED using a pilot plant Original Research Article
22
Technical optimization of the ITER ICRH decoupling and matching system
23
Technical options for optimization of production of Jatropha as a biofuel feedstock in arid and semi-arid areas of Zimbabwe
24
Technical options in venous valve reconstruction
25
Technical overview and first results of the half-size ITER NNBI source
26
Technical Overview of Digital Transmission of NTA Signal in Nigeria
27
Technical performance evaluation of ERP packages with twostage DEA approach
28
Technical performance evaluation of stand-alone photovoltaic array for outdoor field conditions of New Delhi
29
Technical performance evaluation of the potential biobased floor strippers
30
Technical plastics as PCDD/F absorbers
31
Technical Points in Vitamin D Measurement Assays
32
Technical possibility assessment of creating wind power station at Soltanieh zone of Zanjan province
33
Technical potential for developing natural gas use in the Brazilian red ceramic industry
34
Technical potential for photovoltaics on buildings in the EU-27
35
Technical principles of building for safety : Andrew Coburn, Richard Hughes, Antonios Pomonis and Robin Spence, Intermediate Technology Publications, London, 1995, 74 pp., n.p.
36
Technical problems from view point of agriculture in greening on an Arid Land Region
37
Technical procedures for recovery and evaluation of chemical spills on tundra
38
Technical progress and aggregate fluctuations
39
Technical progress, accumulation and financial constraints: is the productivity paradox really a paradox?
40
Technical progress, structural change, and the environmental Kuznets curve
41
Technical progresses for PVC production
42
Technical properties of compounded kaolin sample from Griva (Macedonia, Greece)
43
Technical quality evaluation of EEG recording based on electroencephalographers’ knowledge
44
Technical quality of dog food and salmon feed containing different bacterial protein sources and processed by different extrusion conditions
45
Technical Quality of Maternity Care: the Pregnant Women’s Perspective
46
Technical quality of root canal therapies performed by novice dental students in preclinical practice
47
Technical Quality of Root Canal Treatment Performed by Undergraduate Clinical Students of Isfahan Dental School
48
Technical quality of root canal treatment performed by undergraduate dental students
49
Technical Quality of Root Fillings Performed by Dental Students in Babol Dental School
50
Technical refinements of the vertical mammaplasty: A modified lejour approach
51
Technical reliability of the Greek coastal passenger fleet
52
Technical report: Radiation sensitivity testing by fluorescence in-situ hybridization: how many metaphases have to be analysed?
53
Technical report: the aluminium body of the Audi A8
54
Technical report: the aluminium body of the Audi A8
55
Technical Requirement of Clinical Decision Support system for Diabetic Patients
56
Technical requirements for economical viability of electricity generation in stabilized wind parks
57
Technical response to emergency planning following a landslide
58
Technical response to emergency planning following a landslide
59
Technical results from the surface run of the LUX dark matter experiment
60
Technical review and evaluation of the economics of water desalination: Current and future challenges for better water supply sustainability Original Research Article
61
Technical review of the Laboratory Biosphere closed ecological system facility Original Research Article
62
Technical review of wind energy potential as small-scale power generation sources in Penang Island Malaysia
63
Technical review on jet fuel production
64
Technical risk and new product success: An empirical test in high technology business markets
65
Technical risk involved in long-term operation of steam turbines
66
Technical risk involved in long-term operation of steam turbines
67
Technical sales engineer
68
Technical Services and Tenure: Impediments and Strategies
69
Technical services and the faculty client in the digital age
70
Technical Services Management, 1965–1990: A quarter century of change and a look to the future: Festschrift for Kathryn Luther Henderson : Edited by Linda C. Smith and Ruth C. Carter. New York: The Haworth Press, 1996. 370 pp. $39.95. ISBN 1-56024-960-9
71
Technical services on the net: where are we now? A comparative study of sixty web sites of academic libraries
72
Technical services productivity alternatives
73
Technical services redesign revisited: Librarian/vendor perspectives: A program sponsored by the ALCTS heads of technical services of medium sized academic libraries
74
Technical services task assignment: from macros to collection management intelligent agents
75
Technical Services Today and Tomorrow. In: Michael Gorman, Editor (2nd ed.), Libraries Unlimited, Englewood, CO (1998) ISBN 1-56308-590-9, p. 213 $38.50 ($46.00 outside North America).
76
Technical services: the other reader service
77
Technical session A wind effects on large structures
78
Technical session B: Wind effects on bridges
79
Technical Session C: Wind loads on low buildings
80
Technical session D: environmental & numerical problems
81
Technical Simulation Using Goldfish Bowl Method: A Medical Teaching Method for Increasing Student’s Creativity
82
Technical Skills for Weight Loss: Preliminary Data from a Randomized Trial
83
Technical solutions to reduce the risk of subsoil compaction: effects of dual wheels, tandem wheels and tyre inflation pressure on stress propagation in soil
84
Technical Specification Group Services and System Aspects, IP Multimedia Subsystem (IMS)
85
Technical specifications of matrix raw materials for Hatschek technology based fibrecement – A pragmatic approach
86
Technical Staff Positions and Technology related Tasks: A Study of University Libraries in Pakistan
87
Technical Standpoints in Tracheal Surgery
88
Technical structure of the global nanoscience and nanotechnology literature
89
Technical study on the Iranian Gilsonite as an additive for modification of asphalt binders used in pavement construction
90
Technical support facility
91
Technical tips associated with reduction in leak rate after laparoscopic sleeve gastrectomy: lessons to learn from a nested case–control study
92
Technical tips for laparoscopic gastric banding: 6 years’ experience in 2800 procedures by a single surgical team
93
Technical tools for regional seas management: the role of the Global Ocean Observing System (GOOS)
94
Technical trading can induce long-run memory in financial markets
95
Technical trading in the Santa Fe Institute Artificial Stock Market revisited
96
Technical trading revisited: False discoveries, persistence tests, and transaction costs
97
Technical trading rule profitability and foreign exchange intervention
98
Technical trading rules in the European Monetary System
99
Technical trading rules in the spot foreign exchange markets of developing countries
100
Technical traffic accident investigatorsʹ handbook: A level 3 reference, training and investigation manual : R.W. Rivers, with a foreword by M.J. Lofgren. Charles C. Thomas Books, 2600 South First, Springfield, Illinois 62794-9265. 1997 (2nd ed.)
101
Technical training, sponsored mobility, and functional differentiation: Elite formation in China in the reform era
102
Technical transfer in the mold industry: Grey theory and extension engineering
103
Technical Tricks to Facilitate Totally Endoscopic Major Pulmonary Resections
104
Technical tricks to improve the cosmetic results of breast-conserving treatment Technical tricks to improve the cosmetic results of breast-conserving treatment Technical tricks to improve the cosmetic results of breast-conserving treatment
105
Technical update on transumbilical breast augmentation
106
Technical variability of the GT3X accelerometer
107
TECHNICAL VOCATIONAL EDUCATION IN BRAZIL: THE CONTRACTORS’ PERCEPTIONS
108
Technical, allocative and economic efficiencies in swine production in Hawaii: a comparison of parametric and nonparametric approaches
109
Technical, allocative and economic efficiency of commercial poultry farms in Bangladesh
110
Technical, bioinformatical and statistical aspects of liquid chromatography–mass spectrometry (LC–MS) and capillary electrophoresis-mass spectrometry (CE-MS) based clinical proteomics: A critical assessment
111
Technical, economic and environmental analysis and optimization of steam injection gas turbine using PSO algorithm
112
Technical, economic and environmental analysis of energy production from municipal solid waste
113
Technical, Economic and Social Gaps and Information Needs among Smallholder Farmers in Practice of Ecological Organic Agriculture in Kenya
114
Technical, economical and social actions of farmers to mitigate water deficit in Tamaulipas, Mexico
115
Technical, economics and environmental analysis of semi-intensive shrimp (Litopenaeus vannamei) farming in Sonora, Sinaloa and Nayarit states, at the east coast of the Gulf of California, México
116
Technical, environmental and economic analysis of co-firing of gasified biofuel in a natural gas combined cycle (NGCC) combined heat and power (CHP) plant
117
Technical, environmental and exergetic aspects of hydrogen energy systems
118
Technical, environmental, and economic assessment of deploying advanced coal power technologies in the Chinese context
119
Technical, scale and allocative efficiencies of Turkish banking industry
120
Technical/economic/environmental analysis of biogas utilisation
121
Technical–economic analysis of including wind farms and HFC to solve hybrid TNEM–RPM problem in the deregulated environment
122
Technical-economic Analysis of the Organic Rankine Cycle with Different Energy Sources
123
Technical–economic analysis of wind-powered pumped hydrostorage systems. Part I: model development
124
Technical–economic analysis of wind-powered pumped hydrostorage systems. Part II: model application to the island of El Hierro
125
Technical–economic feasibility study of the installation of biodiesel from microalgae crops in the Atacama Desert of Chile
126
Technical-economic management of smart home energy system in the presence of stochastic and seasonal behavior of PV and EV
127
Technical-economic optimization of a wind power plant by means of a stochastic analytical model
128
Technical–economical analysis of the Saveh biogas power plant
129
Technically Efficient Targets for the Groups by Using the Centralized Scenario and Enhanced Russell Measure
130
Technically natural cosmological constant from supersymmetric 6D brane backreaction
131
Technically sound and sustainable Newcastle disease control in village chickens: lessons learnt over fifteen years
132
Technicism, reflective practice and authenticity in teacher education
133
Technicity as a Quality Indicator of Excellence in Gynaecology
134
Technico-economic simulation and optimization of a compression refrigerating machine
135
Technico-economic study of an industrial reverse osmosis desalination unit Original Research Article
136
Technicolour and precision electroweak data revisited
137
Technics in architecture: Cecil D. Elliot (MIT Press, Cambridge, MA, 1992), 456+ pages, $29.95
138
Technics, Precarity and Exodus in Rave Culture
139
Technihadron production and decay at LEP2
140
Technique « Prolink » pour la curiethérapie de bas débit de dose : résultats préliminaires de toxicité et d’efficacité
141
Technique « Prolink » pour la curiethérapie de bas débit de dose : résultats préliminaires de toxicité et d’efficacité
142
Technique and uses for absorbable barbed sutures
143
Technique d’association d’une RCMI et d’un faisceau cervico-susclaviculaire standard pour l’irradiation des cancers ORL
144
Technique d’association d’une RCMI et d’un faisceau cervico-susclaviculaire standard pour l’irradiation des cancers ORL
145
Technique Feasibility Study of Initiation of Electronic Commerce in Mazandaran Export Agencies by Using of AHP-FUZZY
146
Technique for 1st order design of a large-acceptance magnetic spectrometer
147
Technique for 1st order design of a large-acceptance magnetic spectrometer
148
Technique for a rapid and efficient purification of the SHV-1 and PSE-2 β-lactamases
149
Technique for aerosol generation with controllable micrometer size distribution Original Research Article
150
Technique for blood conservation in ABIOMED BVS 5000 ventricular assist device exchange
151
Technique for broadband correlated interference rejection in microphone arrays
152
Technique for calculating technological parameters of non-Newtonian liquids injection into oil well during workover
153
Technique for cladding of poison sheets for Cd-poisoned moderator
154
Technique for commissural alignment of the arterial trunks during orthotopic heart transplantation
155
Technique for Complete Subcoronary Implantation of the Medtronic Freestyle Porcine Bioprosthesis
156
Technique for constructing the pulmonary trunk for tetralogy of fallot with pulmonary atresia
157
Technique for Construction of an In Vivo Model of Simulated Pulmonary Metastases
158
Technique for contingency monitoring and voltage collapse prediction
159
Technique for delayed primary closure of fasciotomies
160
Technique for delayed primary closure of fasciotomies: The reply
161
Technique for delaying splashing in jet wiping process
162
TECHNIQUE FOR DESIGNING GEARBOX COUPLING BOLTS
163
TECHNIQUE FOR DESIGNING GEARBOX COUPLING BOLTS
164
TECHNIQUE FOR DETERMINING THE PRESSURE DISTRIBUTION ON THE FACE OF A CONTACT ULTRASONIC TRANSDUCER
165
Technique for developing highly strengthened and biaxially textured composite substrates for coated superconductor tapes Original Research Article
166
Technique for direct detection of weakly interacting massive particles using scintillation time discrimination in liquid argon
167
Technique for enhancing generation power density of silicon photovoltaic devices
168
TECHNIQUE FOR ESTIMATING THE REMAINING LIFE OF HYDRAULIC UNIT SEALS
169
TECHNIQUE FOR ESTIMATING THE REMAINING LIFE OF HYDRAULIC UNIT SEALS
170
Technique for extraanatomic bypass in complex aortic coarctation
171
Technique for finding the left anterior descending coronary artery
172
Technique for fractal image compression using genetic algorithm
173
Technique for gray-scale visual light and infrared image fusion based on non-subsampled shearlet transform
174
Technique for harvesting the radial artery as a coronary artery bypass graft
175
Technique for harvesting tibial cancellous bone modified for use in children
176
Technique for harveting keratolimbal allograft from corneocleral button
177
Technique for heterotopic pig heart xenotransplantation in primates
178
Technique for high-sensitivity “in vitro” wear measurement of UHMWPE hip joint liners using radioactive tracer technology
179
Technique For Image De-blurring Using Adaptive Wavelet Lagrange Fuzzy Filter
180
Technique for image fusion based on NSST domain improved fast non-classical RF
181
Technique for implantation of cardioverter defibrillators in the subpectoral position
182
Technique for implanting intramuscular electrodes in the diaphragm by videolaparoscopy in pigs
183
Technique for Insertion of the Inflow Cannula of the INCOR Left Ventricular Assist Device
184
Technique for intraoral inverted ‘L’ osteotomy
185
Technique for measurement of fluorescence lifetime by use of stroboscopic excitation and continuous-wave detection
186
Technique for measuring a reduction in systolic average transmural pressure
187
Technique for measuring longitudinal distribution of Raman gain characteristics in optical fibers
188
Technique for Measuring Moisture Storage Capacity at High Moisture Levels
189
Technique for measuring the deposition velocity of particulate matter to building surfaces
190
Technique for Measuring Thermophysical Properties of Refractory Metals at Supercritical Temperatures
191
Technique for monitoring ozone precursor hydrocarbons in air at photochemical assessment monitoring stations: Sorbent preconcentration, closed-cycle cooler cryofocusing, and GC-FID analysis
192
Technique for online prediction of voltage collapse
193
Technique for Personal Identification: Using the Extracted Index Finger Image to Identify Individuals
194
Technique for power ramp tests in the ISABELLE 1 loop of the OSIRIS reactor Original Research Article
195
Technique for rapid detection of phthalates in water and beverages Original Research Article
196
Technique for Reconstruction of the Sinotubular Junction
197
Technique for repair of decemet membrane detachment
198
Technique for repair of single-ventricle hearts with transposition of the great arteries and aortic arch hypoplasia
199
Technique for replacing the mitral valve with a pulmonary autograft: the Ross-Kabbani operation
200
Technique for selecting capsular tightness in repair of anterior-inferior shoulder instability
201
Technique for the characterization of discharges in micro-strip gas chambers
202
Technique for the characterization of discharges in micro-strip gas chambers
203
Technique for the computation of lower leg muscle bulk from magnetic resonance images
204
Technique for the control of spheroid diameter using microfabricated chips
205
Technique for the measurement of dimensional changes of natural microfibril materials under variable humidity environments
206
Technique for the measurement of hindfoot inversion and eversion and its use to study a normal population
207
technique for the rapid diagnosis of atrial tachycardi in the electrophysiology laboratory
208
Technique for the Repair of Diaphragmatic Eventration
209
Technique for uniform reduction of macroglossia
210
Technique for voltage stability assessment using newly developed line voltage stability index
211
Technique images proteins in living cell membranes: Characterization
212
Technique issues in nonsurgical filling of the periorbital hollows
213
Technique issues in nonsurgical filling of the periorbital hollows reply
214
Technique mono-isocentrique en radiothérapie conformationelle dans le traitement du cancer du nasopharynx : expérience du service de radiothérapie de l’EHS Emir-Abdelkader du centre de lutte contre le cancer d’Oran
215
Technique mono-isocentrique en radiothérapie conformationelle dans le traitement du cancer du nasopharynx : expérience du service de radiothérapie de l’EHS Emir-Abdelkader du centre de lutte contre le cancer d’Oran
216
Technique mono-isocentrique : mise en place pour la radiothérapie adjuvante des cancers du sein dans un centre
217
Technique mono-isocentrique : mise en place pour la radiothérapie adjuvante des cancers du sein dans un centre
218
Technique of Aluminum Alloy Composite by Inversion Casting
219
Technique of anaesthesia for different grades of caesarean section: A cross-sectional study
220
Technique of checking missed eigenvalues for eigenproblem with damping matrix
221
Technique of concomitant fine wire electromyography of the psoas major and the iliacus
222
Technique of controlled reperfusion of the transplanted lung in humans
223
Technique of Ghost (Khatith) Ileostomy: Our Experience and Guidelines
224
Technique of in-Advance Detection of Aquiferous Structures in the Front of Excavation Working Face by Direct Current Electric Method
225
Technique of Lung Retraction During Internal Mammary Artery Harvesting
226
Technique of lymphatic mapping and sentinel node biopsy for melanoma
227
Technique of multipulse gas load fracturing
228
Technique of Posterior Mitral Valve Restoration
229
Technique of Right Heart Protection and Deairing During Heartmate Vented Electric LVAD Implantation
230
Technique of sentinel node biopsy in breast cancer
231
Technique of sentinel node resection in melanoma and breast cancer: Probe-guided surgery and lymphatic mapping
232
Technique of supported liquid membranes (SLMs) for the facilitated transport of vanadium ions (VO2+): Parameters and mechanism on the transport process Original Research Article
233
Technique of top coal caving with vibration
234
Technique of using the St. Jude aortic connector with the radial artery
235
Technique potential for classification of honey by electronic tongue Original Research Article
236
Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhesives
237
Technique sensitivity of water-free one-step adhesives
238
Technique to alter field of view during vitrectomy with phacoemulification and apiration in ga-filled eye
239
Technique to Assess Aging of Propellant Grain
240
TECHNIQUE TO ASSESS THE RESIDUAL PRESTRESS IN PRESTRESSED CONCRETE MEMBERS
241
Technique to automate measurement of water overflow rate in frother characterization testing
242
Technique to Avoid Innominate Artery Ligation and Perform an Anterior Mediastinal Tracheostomy for Residual Trachea of Less Than 5 cm
243
Technique to determine contamination exposure routes and the economic efficiency of folded paper-towel dispensing
244
Technique to encapsulate a low molecular weight hydrophilic drug in biodegradable polymer particles in a liquid–liquid system
245
Technique to evaluate impact of new technology on operator time loading
246
Technique to evaluate nodal reliability indices and nodal prices of restructured power systems
247
Technique to measure CO2 mixing ratio in small flasks with a bellows/IRGA system
248
Technique to measure lumbar curvature in the ergonomic evaluation of chairs: description and validation
249
Technique to Measure Surface-Fouling Tendencies of Steepwater from Corn Wet Milling.
250
Technique to protect the internal mammary artery pedicle
251
Technique to repair tetralogy of fallot with absent pulmonary valve
252
Technique validation by liquid chromatography for the determination of acyclovir in plasma
253
Technique without theory or theory from technique? An examination of practical, philosophical, and foundational issues in data mining
254
Techniques and applications for predictive metallurgy and ore characterization using optical image analysis
255
Techniques and applications of computation slicing
256
Techniques and Benefits of Multiple Internal Mammary Artery Bypass at 20 Years of Follow-Up
257
Techniques and complications of ileostomy takedown
258
Techniques and complications of laparoscopy-assisted distal gastrectomy (LADG) for gastric cancer
259
Techniques and detectors for polarimetry in X-ray astronomy
260
Techniques and detectors for polarimetry in X-ray astronomy
261
Techniques and innovations in liver surgery
262
Techniques and methods in ground-based observation of Mercury
263
Techniques and Performance of Post-Prestressed Tunnel Liner
264
Techniques and practice of chromatography: R.P.W. Scott, Marcel Dekker, New York, 1995 (ISBN 0-8247-9460-5). xii + 395 pp. price US $ 115.00
265
Techniques and principles of tuberosity fixation for proximal humeral fractures treated with hemiarthroplasty
266
Techniques and results for the direct detection of dark matter (review)
267
Techniques and results for the direct detection of dark matter (review)
268
Techniques characterizing the coronary atherosclerotic plaque: influence on clinical decision making?
269
Techniques classique bidimensionnelle et mono-isocentrique tridimensionnelle dans l’irradiation du sein et des aires ganglionnaires : comparaison dosimétrique
270
Techniques Employed in Production of Traditional Vaccines Commonly Used by Military Forces: A Review
271
Techniques for absolute capacity determination in railways
272
Techniques for accuracy assessment of tree locations extracted from remotely sensed imagery
273
Techniques for accurate performance evaluation in architecture exploration
274
Techniques for adding useful functions to carbon surfaces by cold plasmas
275
Techniques for analysing Late Cenozoic river terrace sequences
276
Techniques for analytical testing of unconventional samples
277
Techniques for analyzing literature search results
278
Techniques for analyzing the early stages of crystallization reactions
279
Techniques for assessing the effects of uncertainties in thermodynamic models and data
280
Techniques for assessment of wear between human cartilage surfaces
281
Techniques for augmentation of exogenous DNA uptake by ovine spermatozoa
282
Techniques for autologous transplants
283
Techniques for available bandwidth measurement in IP networks: A performance comparison
284
Techniques for averting and correcting errors in 3D terrain topology measurements
285
Techniques for biological characterization of tissue-engineered tendon and ligament
286
Techniques for buckling experiments on steel silo transition junctions
287
Techniques for CAD reconstruction of `as-builtʹ environments and application to preparing for dismantling of plants Original Research Article
288
Techniques for calibrating spindles with nanometer error motion
289
Techniques for cash management in scheduling manufacturing operations
290
Techniques for characterization of polyamide thin film composite membranes Original Research Article
291
Techniques for Classroom Interaction
292
Techniques for Combining American and British Food Composition Data on Specific Carbohydrates
293
Techniques for computational fluid dynamics modelling of flow in membrane channels
294
Techniques for controlling bivariate grouped observations
295
Techniques for controlling stage structure of metal chloride-GIC
296
Techniques for delivery and monitoring of TOOKAD (WST09)-mediated photodynamic therapy of the prostate: Clinical experience and practicalities
297
Techniques for detailed heat transfer measurements in cold supersonic blowdown tunnels using thermochromic liquid crystals
298
Techniques for determination of trace metals in small samples of size-fractionated particulate matter: phytoplankton metals off central California
299
Techniques for Dispersion of Microorganisms into Air
300
Techniques for effective simulation, optimization, and uncertainty quantification of the in-situ upgrading process
301
Techniques for Efficient Case Retrieval and Rainfall Prediction Using CBR and Fuzzy Logic
302
Techniques for enhancing real-time CORBA quality of service
303
Techniques for evaluating harmonic distortion in class-AB output stages: A tutorial
304
Techniques for evaluating selected reproductive disorders of stallions
305
Techniques for evaluating the performance of landslide susceptibility models
306
Techniques for extraction of bioactive compounds from plant materials: A review Original Research Article
307
Techniques for Fast and Sensitive Measurements of Two-Dimensional Birefringence Distributions
308
Techniques for finding similarity knowledge in OLAP reports
309
Techniques for framing questions in conducting family meetings in palliative care
310
Techniques for gas chromatography of volatile terpenoids from a range of matrices
311
Techniques for generating 3-D EBSD microstructures by FIB tomography
312
Techniques for generic probabilistic inversion
313
Techniques for GIS modeling of coastal dunes
314
Techniques for Handling Missing Data in Secondary Analyses of Large Surveys
315
TECHNIQUES FOR HAPLOID AND DOUBLED HAPLOID PRODUCTION
316
Techniques for high quality Arabic speech synthesis
317
Techniques for high-efficient development of offshore fluvial oilfields
318
Techniques for high-frequency integrated test and measurement
319
Techniques for high-performance computational steering
320
Techniques for image enhancement and segmentation of tomographic images of porous materials
321
Techniques for improving or replacing ageing on lees of oak aged red wines: The effects on polysaccharides and the phenolic composition
322
Techniques for improving response rates in OM survey research
323
Techniques for improving the cosmetic outcome of breast conservation surgery
324
Techniques for in-band phase noise reduction in (delta)(sigma) synthesizers
325
Techniques for including large deformations associated with salt and fault motion in basin modeling
326
Techniques for injection of pre-characterized dust into the scrape-off layer of fusion plasma
327
Techniques for input ripple current cancellation: classification and implementation [in SMPS]
328
Techniques for introscopy of condense matter in terahertz spectral region
329
Techniques for introscopy of condense matter in terahertz spectral region
330
Techniques for jar formation of valve-regulated lead–acid batteries
331
Techniques for laparoscopic liver parenchymal transection
332
Techniques for localisation of konjac glucomannan in model milk protein–polysaccharide mixed systems: Physicochemical and microscopic investigations
333
Techniques for managing planar daylight data
334
Techniques for mapping tasks to machines in heterogeneous computing systems
335
Techniques for measurement of droplet size and velocity distributions in agricultural sprays
336
Techniques for measuring atmospheric aerosols at the high resolution fly’s eye experiment
337
Techniques for measuring gas emissions from a composting stockpile of cattle manure
338
Techniques for measuring particle size distribution of particulate matter emitted from animal feeding operations
339
Techniques for measuring surface forces
340
Techniques for measuring the composition of hydrogenated amorphous silicon–germanium alloys
341
Techniques for measuring the elastic wave velocities of melts and partial molten systems under high pressure conditions Original Research Article
342
Techniques for measuring the thermal conductivity of nanofluids: A review
343
Techniques for measuring weight bearing during standing and walking
344
Techniques for mechanical stimulation of cells in vitro: a review
345
Techniques for methods of collection, database management and distribution of agrometeorological data
346
Techniques for microstructural characterization of powder-processed nickel-based superalloys
347
Techniques for microstructural characterization of powder-processed nickel-based superalloys
348
Techniques for monitoring coastal change: a review and case study
349
Techniques for obtaining the monthly mean hourly diffuse radiation from daily values
350
Techniques for one-loop calculations in constrained differential renormalization Original Research Article
351
Techniques for Ovarian Tissue, Whole Ovary, Oocyte and Embryo Cryopreservation
352
Techniques for Ovarian Tissue, Whole Ovary, Oocyte and Embryo Cryopreservation
353
Techniques for parallel quasi-Monte Carlo integration with digital sequences and associated problems Original Research Article
354
Techniques for patterning and guidance of primary culture neurons on micro-electrode arrays
355
Techniques for performance optimisation of particle collection systems
356
Techniques for performing caesarean section
357
Techniques for Planning and Control Dependent on Different Types of Flexibility
358
Techniques for preserving and determining aluminium fractions in soil solution from podzolic forest soils
359
Techniques for prevention of pancreatic leak after pancreatectomy
360
Techniques for quantitative analyses of calcareous marine phytoplankton
361
Techniques for Realistic Visualization of Fluids: A Survey
362
Techniques for reducing false alarms in infrared forest-fire automatic detection systems
363
Techniques for restricting multiple overtaking conflicts and performing compound moves when constructing new train schedules
364
Techniques for scheduling with rejection
365
Techniques for simultaneous quantification of wind and water erosion in semi-arid regions
366
Techniques for soft tissue management around the implants: a review
367
Techniques for sperm clean-up and selection of stallion spermatozoa
368
Techniques for stimulated Raman excitation and CARS detection of radicals created by photodissociation
369
Techniques for tailored porosity in MgO targets
370
Techniques for Teaching HIV Counseling: An Intensive Experiential Model
371
TECHNIQUES FOR TESTING THIN FILMS IN TENSION
372
Techniques for the application of the analytical solution to the multicylinder somatic shunt cable model for passive neurones
373
Techniques for the assessment of influence in DEA
374
Techniques for the creation of digital watermarks in sequential circuit designs
375
Techniques for the detection of second sound shock pulses and induced quantum turbulence in He II Original Research Article
376
Techniques for the Determination of Cyanide in a Process Environment: A Review
377
Techniques for the differentiation of carbon types present in lignite-rich mine soils
378
Techniques for the evaluation of maturity for composts of industrially contaminated lake sediments
379
Techniques for the measurement of common mode noise in binary read-out systems
380
Techniques for the measurement of common mode noise in binary read-out systems
381
Techniques for the placement of hepatic artery catheters for regional chemotherapy in unresectable liver metastases
382
Techniques for the Preparation of Porous Metals
383
Techniques for the study of reaction kinetics at low temperatures: application to the atmospheric chemistry of Titan
384
Techniques for the systematic treatment of certain coupled problems
385
Techniques for the thin film growth of La1−xSrxCrO3 for solid state ionic devices
386
Techniques for the Visualization of Topological Defect Behavior in Nematic Liquid Crystals
387
Techniques for transformation of biogas to biomethane
388
Techniques for trapping ammonia generated from urea treatment of barley straw
389
Techniques for validating the historic record of lake sediments. A demonstration of their use in the English Lake District
390
Techniques in a pseudocorporate environment [engineering education]
391
Techniques in managing proximal humeral malunions
392
Techniques in matroid reconstruction Original Research Article
393
Techniques in the management of juxta-articular aggressive and recurrent giant cell tumors around the knee
394
Techniques of applying wavelet transform into combined model for short-term load forecasting
395
Techniques of assisted reproduction
396
Techniques of controlling hydrodynamic size of ferrofluid of gelatin-coated magnetic iron oxide nanoparticles
397
Techniques of CT Colonography (Virtual Colonoscopy)
398
Techniques of CT Colonography (Virtual Colonoscopy)
399
Techniques of Eigenvalues Estimation and Association,
400
Techniques of Eyebrow Lifting: A Narrative Review
401
Techniques of ground-water recharge estimates in arid/semi-arid areas, with examples from Abu Dhabi
402
Techniques of Identifying Icing and De-Icing of Wind Turbines
403
Techniques of Male Circumcision
404
Techniques of Network Reconfiguration for Service Restoration in Shipboard Power System: A Review
405
Techniques of patient-oriented research : Charles Y. C. Pak, Perrie M. Adams (editors). Raven Press, 1994
406
Techniques of Reconstruction for Inadequate Donor Left Atrial Cuff in Lung Transplantation
407
Techniques of replica symmetry breaking and the storage problem of the McCulloch–Pitts neuron
408
Techniques of replica symmetry breaking and the storage problem of the McCulloch–Pitts neuron
409
Techniques of signal generation required for electropermeabilization: Survey of electropermeabilization devices
410
Techniques of spatially explicit individual-based models: construction, simulation, and mean-field analysis
411
Techniques of spatially explicit individual-based models: construction, simulation, and mean-field analysis
412
Techniques of Successful Application of Factor Analysis in Software Measurement
413
Techniques of Teaching Professional Vocabulary with special reference to Vocabulary used in Media
414
Techniques of the FLASH thin target experiment
415
Techniques of the FLASH thin target experiment
416
Techniques of Transmitting Beamforming to Control the Generated Weights
417
Techniques to accelerate BEM computation to provide virtual reality update of stress solutions
418
Techniques to accelerate convergence of stress-controlled molecular dynamics simulations of dislocation motion
419
Techniques to address the malar fat pad
420
Techniques to alleviate the effects of view aliasing artifacts in computed tomography
421
Techniques to alleviate the effects of view aliasing artifacts in computed tomography
422
Techniques to assess cross-border air pollution and application to a US-Mexico border region
423
Techniques to audit and certify the long-term integrity of digital archives
424
Techniques to carry weight loads and resist against bending in conical shells, cases in Kashan
425
Techniques to characterize fatigue behaviour of full size drill pipes and small scale samples
426
Techniques to control the electricity generation in a series hybrid electrical vehicle
427
Techniques to determine ignition, flame stability and burnout of blended coals in p.f. power station boilers
428
Techniques to improve the CLEAN deconvolution algorithm
429
Techniques to improve the usability of nickel–hydrogen cells
430
Techniques to increase the schedulable utilization of cache-based preemptive realtime systems
431
Techniques to investigate cellular and molecular interactions in the host response to implanted biomaterials
432
Techniques to measure dynamic surface tension
433
Techniques to Reduce the Impact of Asulam Drift from Helicopter Sprayers on Native Vegetation
434
Techniques to reduce the peel stresses in adhesive joints with composites
435
Techniques to Support Successful Strategic Project Management in the UK Upstream Oil and Gas Sector
436
Techniques to suppress intermediate density in topology optimization of compliant mechanisms
437
Techniques used for determining cure kinetics of rubber compounds
438
Techniques, applications and future prospects of diamond anvil cells for studying supercritical water systems
439
Techniques/scattering
440
Techniques/Scattering
441
TECHNIQUES: A MULTIPLEXED GRATING SHEARING INTERFEROMETER FOR REFLECTION MOIRÉ ANALYSIS OF PARTIAL SLOPES AND CURVATURES OF BENT PLATES
442
TECHNIQUES: EXPERIMENTAL MODAL ANALYSIS OF TIRES
443
TECHNIQUES: NONDESTRUCTIVE EVALUATION OF TREES
444
Techno Economic and Life Cycle Cost Assessment of the CCHP/ PV Hybrid System Application
445
Techno economic evaluation for the treatment of pesticide industry effluents using membrane schemes Original Research Article
446
Techno therapy or nurtured niches? Technology studies and the evaluation of radical innovation
447
Techno-commercial perspective study for sintered fly ash light-weight aggregates in India
448
Technoculture Approach in Facing the Transnational Threat
449
Techno-Econo-Environmental study on the use of domestic-scale wind turbines in Iran
450
Techno-economic analysis and environmental impact of fuel economy labels for passenger cars in Indonesia
451
Techno-economic analysis and optimization of the heat recovery of utility boiler flue gas
452
Techno-economic analysis between the performances of heat source air conditioners in South Africa
453
Techno-economic analysis for a sugarcane biorefinery: Colombian case
454
Techno-economic analysis for brewer’s spent grains use on a biorefinery concept: The Brazilian case
455
Techno-economic analysis of a biodiesel production process from vegetable oils
456
Techno-economic analysis of a CO2 capture plant integrated with a commercial scale combined cycle gas turbine (CCGT) power plant
457
Techno-economic analysis of a coal-fired CHP based combined heating system with gas-fired boilers for peak load compensation
458
Techno-Economic Analysis of a Grid-Connected Hybrid Energy System for Developing Regions
459
Techno-economic analysis of a hybrid mini-grid system for Fiji islands
460
Techno-economic analysis of a multi-stage stacked tray (MSST) solar still
461
Techno-economic analysis of a plastic cover solar air heater
462
Techno-economic analysis of a roof-integrated solar air heating system for drying fruit and vegetables
463
Techno-economic analysis of a two-step biological process producing hydrogen and methane
464
Techno-economic analysis of a wind–solar hybrid renewable energy system with rainwater collection feature for urban high-rise application
465
Techno-economic analysis of ammonia production via integrated biomass gasification
466
Technoeconomic analysis of an integrated microalgae photobioreactor, biodiesel and biogas production facility
467
Techno-economic analysis of an optimized photovoltaic and diesel generator hybrid power system for remote houses in a tropical climate
468
Techno-economic analysis of autonomous PV-wind hybrid energy systems using different sizing methods
469
Techno-economic analysis of autotrophic microalgae for fuel production
470
Techno-economic analysis of biodiesel production from Jatropha curcas via a supercritical methanol process
471
Techno-economic analysis of bioethanol production from lignocellulosic residues in Colombia: A process simulation approach
472
Technoeconomic analysis of biofuels: A wiki-based platform for lignocellulosic biorefineries
473
Techno-economic analysis of biomass to transportation fuels and electricity via fast pyrolysis and hydroprocessing
474
Techno-economic analysis of biooil production process from palm empty fruit bunches
475
Techno-economic analysis of chemical looping combustion with humid air turbine power cycle
476
Techno-economic analysis of co-fired biomass integrated gasification/combined cycle systems with inclusion of economies of scale
477
Techno-economic analysis of corn stover fungal fermentation to ethanol
478
Technoeconomic analysis of five microalgae-to-biofuels processes of varying complexity
479
Techno-Economic Analysis of Flare Gas to Gasoline (FGTG) Process through Dimethyl Ether Production
480
Techno-economic analysis of fuel cell auxiliary power units as alternative to idling
481
Techno-economic analysis of grid-connected battery storage
482
Techno-Economic Analysis of Heavy Fuel Oil Hydrodesulfurization Process for Application in Power Plants
483
Techno-economic analysis of integrating sweet sorghum into sugar mills: The Central American case
484
Techno-economic analysis of integrating the methane oxidative coupling and methane reforming processes
485
Technoeconomic analysis of large scale production of pre-emergent Pseudomonas fluorescens microbial bioherbicide in Canada
486
Techno-economic analysis of liquid fuel production from woody biomass via hydrothermal liquefaction (HTL) and upgrading
487
Techno-economic analysis of monosaccharide production via fast pyrolysis of lignocellulose
488
Technoeconomic analysis of once through long tube MSF process for high capacity desalination plants Original Research Article
489
Techno-economic analysis of PEM fuel cells role in photovoltaic-based systems for the remote base stations
490
Techno-economic analysis of RES & hydrogen technologies integration in remote island power system
491
Techno-economic Analysis of Small Scale Electricity Generation from the Lignocellulosic Biomass
492
Techno-economic analysis of solar parabolic trough type energy system for garment zone of Jaipur city
493
Techno-economic analysis of stand-alone hybrid photovoltaic–diesel–battery systems for rural electrification in eastern part of Iran—A step toward sustainable rural development
494
Techno-economic analysis of succinic acid production using adsorption from fermentation medium
495
Techno-economic analysis of the coal-to-olefins process in comparison with the oil-to-olefins process
496
Techno-economic analysis of the energy exploitation of biomass residues in Heraklion Prefecture—Crete
497
Techno-economic analysis of the integration of hydrogen energy technologies in renewable energy-based stand-alone power systems
498
Techno-economic analysis of the Jordanian solar water heating system
499
Techno-economic analysis of transportation fuels from defatted microalgae via hydrothermal liquefaction and hydroprocessing
500
Techno-economic analysis of tube bundle orientation for high capacity brine recycle MSF desalination plants Original Research Article
501
Techno-economic analysis of using corn stover to supply heat and power to a corn ethanol plant – Part 1: Cost of feedstock supply logistics
502
Techno-economic analysis of using corn stover to supply heat and power to a corn ethanol plant – Part 2: Cost of heat and power generation systems
503
Techno-economic analysis of wastewater sludge gasification: A decentralized urban perspective
504
Technoeconomic analysis of wheat straw densification in the Canadian Prairie Province of Manitoba
505
Techno-economic analysis of wood biomass boilers for the greenhouse industry
506
Techno-economic and behavioural analysis of battery electric, hydrogen fuel cell and hybrid vehicles in a future sustainable road transport system in the UK
507
Techno-Economic and Environmental Analyses of Digestate Treatment after Anaerobic Digestion Process
508
Techno-economic and Environmental Analysis of Floating Photovoltaic Power Plants: A case Study of Iran
509
Techno-economic and environmental evaluation of demand side management techniques for rural electrification in Ibadan, Nigeria
510
Techno-Economic and Environmental Evaluation of Expansion Turbines for Gas Field Improvement (Case study)
511
Techno-economic and environmental evaluations of large scale gasification-based CCS project in Romania
512
Techno-economic and environmental risk analysis for advanced marine propulsion systems
513
TECHNO-ECONOMIC AND ENVIRONMENTAL STUDY FOR BAGASSE DRIVEN ETHANOL - A CASE STUDY
514
Techno-Economic and Exergetic Analysis and Optimization of Integrated MED- RO Desalination System in the Genaveh Combined Cycle Power Plant
515
Techno-Economic and Life Cycle Analysis of Energy Generation Using Concentrated Solar Power (CSP) Technology in Sokoto State. Nigeria
516
Techno-economic and social analysis of energy storage for commercial buildings
517
Technoeconomic appraisal of a ground source heat pump system for a heating season in eastern Turkey
518
Techno-economic appraisal of an integrated collector/storage solar water heater
519
Techno-economic assessment and environmental impacts of desalination technologies Original Research Article
520
Techno-economic assessment and optimization of Stirling engine micro-cogeneration systems in residential buildings
521
Techno-economic assessment and policy of gas power generation considering the role of multiple stakeholders in China
522
Technoeconomic assessment and strategic analysis of heat and power co-generation (CHP) from biomass in Greece
523
Techno-economic assessment model of screening step of agricultural wastes recycling to animal feed project
524
Technoeconomic assessment of a building-integrated PV system for electrical energy saving in residential sector
525
Technoeconomic assessment of a hybrid solar/wind installation for electrical energy saving
526
Techno-economic assessment of a stand-alone PV/hybrid installation for low-cost electrification of a tourist resort in Greece
527
Techno-economic assessment of biofuel development by anaerobic digestion of European marine cold-water seaweeds
528
Techno-economic assessment of biomass slow pyrolysis into different biochar and methanol concepts
529
Technoeconomic assessment of biomass to energy
530
Techno-economic assessment of biomass-to-ethanol by indirect fluidized bed gasification: Impact of reforming technologies and comparison with entrained flow gasification
531
Techno-economic assessment of carbon-negative algal biodiesel for transport solutions
532
Techno-economic Assessment of Coal to SNG Power Plant in Kalimantan
533
Techno-Economic Assessment of Different Inlet Air Cooling Systems in Warm Dry Wet Climate Stations
534
Techno-economic assessment of energy production potential from tidal streams in Nigeria
535
Techno-economic assessment of fossil fuel power plants with CO2 capture – Results of EU H2-IGCC project
536
Techno-economic assessment of gasification as a process step within biomass-to-liquid (BtL) fuel and chemicals production
537
TechnoEconomic Assessment of Heat Recovery in Series Condensers Arrangement: Hot and Humid Regions
538
Techno-economic assessment of high efficient energy production (SOFC-GT) for residential application from natural gas
539
Techno-economic assessment of hydrogen production from underground coal gasification (UCG) in Western Canada with carbon capture and sequestration (CCS) for upgrading bitumen from oil sands
540
Techno-economic assessment of hydrogen production processes for the hydrogen economy for the short and medium term
541
Techno-Economic Assessment of Implementing Concentrated Solar Power Technology in the Palestinian Territories
542
Techno-economic assessment of lightweight and zero emission vehicles deployment in the passenger car fleet of developing countries
543
Techno-economic assessment of micro-algae as feedstock for renewable bio-energy production
544
Techno-economic assessment of municipal solid waste management in Jordan
545
Technoeconomic assessment of phenanthrene degradation by Pseudomonas stutzeri CECT 930 in a batch bioreactor
546
Technoeconomic assessment of potential processes for bio-ethylene production
547
Techno-economic assessment of recycling acidic sludge project of reprocessing industries to value-added gaseous products using Plasmatron
548
Techno-economic assessment of recycling practices of municipal solid wastes in Cyprus
549
Techno-Economic Assessment of Removing BTEX Pollutants by Designing Thermal Oxidation Unit in a Bituminous Waterproofing Factory in Iran
550
Techno-Economic Assessment of the AHP Based Selected Method for Separating Formic Acid from an Aqueous Effluent
551
Techno-economic assessment of triticale straw for power generation
552
Techno-economic assessment of VOC-emission reduction strategies based on the ARGUS model
553
Techno-Economic Assessment Power Supply in Offshore Platform by Renewable and Conventional Source
554
Techno-economic comparison between different technologies for a CCS power generation plant integrated with a sub-bituminous coal mine in Italy
555
Techno-economic comparison of a biological hydrogen process and a 2nd generation ethanol process using barley straw as feedstock
556
Techno-economic comparison of energy storage systems for island autonomous electrical networks
557
Techno-economic comparisons of hydrogen and synthetic fuel production using forest residue feedstock
558
Techno-economic databases in the context of integrated assessment modelling
559
Techno-economic Efficiency of Trunk and Mechanical Harvest Aid Shakers for Harvesting Olive Fruits in Guilan Province, Iran
560
Techno-economic evaluation for development of onshore carbon dioxide pipeline networks
561
Techno-economic evaluation for the heat integration of vaporisation cold energy in natural gas processing
562
Techno-economic evaluation of a PVAm CO2-selective membrane in an IGCC power plant with CO2 capture
563
Techno-economic evaluation of a solar powered water desalination plant
564
Techno-economic evaluation of advanced IGCC lignite coal fuelled power plants with CO2 capture
565
Techno-economic evaluation of bioethanol production from three different lignocellulosic materials
566
Techno-economic evaluation of biohydrogen production from wastewater and agricultural waste
567
Techno-economic evaluation of coal-based polygeneration systems of synthetic fuel and power with CO2 recovery
568
Techno-economic evaluation of coal-to-liquids (CTL) plants with carbon capture and sequestration
569
Techno-economic evaluation of concentrating solar power generation in India
570
Techno-economic evaluation of domestic solar water heating systems in India
571
Technoeconomic evaluation of IGCC power plants for CO2 avoidance
572
Techno-economic evaluation of masonry type animal feed solar cooker in rural areas of an Indian state Rajasthan
573
Techno-economic evaluation of membrane filtration for the recovery and re-use of tanning chemicals
574
Techno-economic evaluation of off-grid hybrid photovoltaic–diesel–battery power systems for rural electrification in Saudi Arabia—A way forward for sustainable development
575
Techno-economic evaluation of small hydro power plants in Greece: a complete sensitivity analysis
576
Techno-economic evaluation of soil-aquifer treatment using primary effluent at Ahmedabad, India
577
Techno-economic evaluation of the evaporative gas turbine cycle with different CO2 capture options
578
Techno-economic evaluation of the integrated biosorption–pyrolysis technology for lead (Pb) recovery from aqueous solution
579
Techno-economic evaluation of thermo-chemical biomass-to-ethanol
580
Techno-economic evaluations of a generic wood-to-ethanol process: effect of increased cellulose yields and enzyme recycle
581
Techno-Economic Feasibility and Flowsheet Synthesis of Scrap Tire/Plastic Waste Liquefaction
582
Techno-Economic Feasibility and Flowsheet Synthesis of Scrap Tire/Plastic Waste Liquefaction
583
Techno-economic feasibility of absorption heat pumps using wastewater as the heating source for desalination Original Research Article
584
Techno-economic feasibility of energy supply of remote villages in Palestine by PV-systems, diesel generators and electric grid
585
Techno-economic feasibility of high-temperature high-lift chemical heat pumps for upgrading industrial waste heat
586
Techno-economic Feasibility Study of the Gunde Teklehaymanote Micro-hydropower Plant at Tindwat River, Central Gondar, Ethiopia
587
Techno-Economic Impact of Electrification Rural Areas in Palestine using Micro-Grid Solar Energy “Al-Mkahel& Saeed Villages – Case Study”
588
Techno-economic impacts of shale gas on cellulosic biofuel pathways
589
Techno-economic implications of improved high gravity corn mash fermentation
590
Techno-economic investigation of alternative propulsion plants for Ferries and RoRo ships
591
Techno-economic modelling of a solid oxide fuel cell stack for micro combined heat and power
592
Techno-economic operation optimization of a HRSG in combined cycle power plants based on evolutionary algorithms: A case study of Yazd, Iran
593
Techno-economic optimisation of hydrogen production by PV – electrolysis: “RenHydrogen” simulation program
594
Techno-Economic Optimization of a Continuous Process for the Biodiesel Production from Waste Vegetable Oils
595
Techno-economic optimization of a shell and tube heat exchanger by genetic and particle swarm algorithms
596
Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms
597
Techno-economic Optimization of Combined Cooling, Heat and Power System Based on Response Surface Methodology
598
Techno-economic performance analysis of bio-oil based Fischer-Tropsch and CHP synthesis platform
599
Techno-economic performance analysis of parabolic trough collector in Dhahran, Saudi Arabia
600
Techno-economic performance and cost reduction potential for the substitute/synthetic natural gas and power cogeneration plant with CO2 capture
601
Techno-economic performance and feasibility of biomass energy system: Tunisian case study
602
Techno-economic prospects for CO2 capture from distributed energy systems
603
Techno-economic prospects of small-scale membrane reactors in a future hydrogen-fuelled transportation sector
604
Techno-economic review of existing and new pumped hydro energy storage plant
605
Techno-economic review of solar cooling technologies based on location-specific data
606
Techno-economic studies on hybrid energy based cooling system for milk preservation in isolated regions
607
Techno-economic study for combined cycle power generation with desalination plants at Sharm El Sheikh Original Research Article
608
Techno-economic study of a heat pump enhanced flue gas heat recovery for biomass boilers
609
Techno-economic study of CO2 capture and storage in coal fired oxygen fed entrained flow IGCC power plants
610
Techno-economic study of CO2 capture from an existing coal-fired power plant: MEA scrubbing vs. O2/CO2 recycle combustion
611
Techno-economic study of different alternatives for biodiesel production
612
Techno-economic study of NMMO pretreatment and biogas production from forest residues
613
Technoeconomic study of supercritical biodiesel production plant
614
Techno-economic survey of Organic Rankine Cycle (ORC) systems
615
Techno-economic valuation and optimization of integrated photovoltaic/wind energy conversion system
616
Techno-economic viability of innovative membrane systems in water and mass recovery from dairy wastewater
617
Techno-economical analysis of off-grid hybrid systems at Kutubdia Island, Bangladesh
618
Techno-economical evaluation of a rice husk ash (RHA) based sand–cement block for reducing solar conduction heat gain to a building
619
Techno-economical evaluation of fluoride removal by electrocoagulation process: Optimization through response surface methodology Original Research Article
620
Techno-economical evaluation of water reuse for wetland restoration: a case study in a natural park in Catalonia, Northeastern Spain Original Research Article
621
Techno-economical method for the capacity sizing of a small hydropower plant
622
Techno-economical optimization based on swarm intelligence algorithm for a stand-alone wind-photovoltaic-hydrogen power system at south-east region of Mexico
623
Techno-economical study of biogas production improved by steam explosion pretreatment
624
Techno-economical study of ethanol and biogas from spruce wood by NMMO-pretreatment and rapid fermentation and digestion
625
Techno-economical study of hybrid power system for a remote village in Algeria
626
Techno-economical study of the use of Itaipu dam spilled turbinable energy to produce ammonia
627
Techno-economics of biogas-based water pumping in India: An attempt to internalize CO2 emissions mitigation and other economic benefits
628
Techno-economics of carbon preserving butanol production using a combined fermentative and catalytic approach
629
Techno-economics of micro-hydro projects for decentralized power supply in India
630
Techno-economics of rice husk pyrolysis, conversion with catalytic treatment to produce liquid fuel
631
Techno-economics of small wind electric generator projects for decentralized power supply in India
632
Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran
633
Techno-Environmental Analysis of Hybrid Energy System for Offshore Oil Rig Black Start
634
Techno-financial analysis and design of on-board intelligent-assisting system for a hybrid solar–DEG-powered boat
635
TechnoFusiَn, a relevant facility for fusion technologies: The remote handling area
636
Technogenic load in small river watersheds in the Hibiny Mountains
637
Technogenic soils developed on mine spoils containing iron sulphides: Mineral transformations as an indicator of pedogenesis
638
Technogeopolitics and the struggle for control of world air routes, 1910–1928
639
TechnoGIN, a tool for exploring and evaluating resource use efficiency of cropping systems in East and Southeast Asia
640
Techno-globalism, techno-nationalism and technological systems: organizing the evidence
641
Technogovernance: Evidence, subjectivity, and the clinical encounter in primary care medicine
642
Technohype and the book
643
Technoliteracy and learning: An analysis of the quality of knowledge in electronic representations of understanding
644
Technologic Advances in Endodontics
645
Technologic optimization for separation of scarce coal sludge
646
Technologic parameter optimization of gas quenching process using response surface method
647
TECHNOLOGIC PERFORMANCES OF CARP BREEDING (CYPRINUS CARPIO) IN GROUND BASINS OF SMALL DIMENSIONS
648
Technological acquisition and investment: lessons from recent indian experience
649
Technological activities of Staphylococcus carnosus and Staphylococcus simulans strains isolated from fermented sausages
650
Technological activity and survival of firms
651
Technological advancement, learning, and the adoption of new technology
652
Technological Advancements in Monoclonal Antibodies
653
Technological advancements in synchronous collaboration: The effect of 3D virtual worlds and tangible user interfaces on architectural design
654
Technological advances and applications of geothermal energy pile foundations and their feasibility in Australia
655
Technological advances and mechanistic basis for fungal biopulping
656
Technological advances and the next 50 years of cardiology
657
Technological advances and the next 50 years of cardiology
658
Technological advances and the next 50 years of cardiology: Ethics and privacy
659
Technological advances and the next 50 years of cardiology: Glossary
660
Technological advances in aquaculture farms for minimal effluent discharge to oceans
661
Technological Advances in Caries Diagnosis
662
Technological advances in equestrian sports: Are they beneficial for both performance and welfare?
663
Technological Advances in Extraction Techniques and Outpatient Oral Surgery
664
Technological Advances in Implantable Cardioverter-Defibrillators Before the Year 2000 and Beyond
665
Technological advances in improved and alternative sources of lipids: Edited by B. S. Kamel & Y. Kakuda, Blackie Academic & Professional, Glasgow. 1993. xiv 397 pp. Cost £69.00. ISBN 0-7514-00017
666
Technological Advances in Minimally Invasive TMJ Surgery
667
Technological advances in mucositis research: New insights and new issues
668
Technological Advances in Nontraditional Orthodontics
669
Technological advances in rebar tying jobs: a comparative analysis of the associated yields and illnesses
670
Technological advances in steels heat treatment
671
Technological advantage, alliances with customers, local knowledge and competitor identification
672
Technological agglomeration and the emergence of clusters and networks in nanotechnology
673
Technological alliances and the market valuation of new economy firms
674
Technological Alternatives with Low Consumptions to Regenerate the Degraded Grasslands
675
Technological and architectural solutions for Dutch nursing homes: Results of a multidisciplinary mind mapping session with professional stakeholders
676
Technological and architectural solutions for Dutch nursing homes: Results of a multidisciplinary mind mapping session with professional stakeholders
677
Technological and chemical assessment of various thermochemical cycles: From the UT3 cycle up to the two steps iron oxide cycle
678
Technological and economic comparison of the usage of beech and alder wood in plywood and laminated veneer lumber manufacturing
679
Technological and economic strategies for the optimization of Polish electrolytic copper production plants
680
Technological and economical analysis of water recovery in steam injected gas turbines
681
Technological and economical comparison of roughing strategies via milling, sinking-EDM, wire-EDM and ECM for titanium- and nickel-based blisks
682
Technological and Efficiency Change of Private Hospitals in Tanzania: Does the Size Matter?
683
Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials
684
Technological and material aspects of production of vibration compensators for exhaust systems
685
Technological and nutritional aspects in hyperproteic bread prepared with the addition of sunflower meal
686
Technological and practical challenges of dry powder inhalers and formulations
687
Technological and probiotic role of adjunct cultures of non-starter lactobacilli in soft cheeses Original Research Article
688
Technological and Quality Characteristics of Some Sweet Corn (Zea mays saccharata Sturt) Varieties
689
Technological and safety characteristics of Staphylococcaceae isolated from Spanish traditional dry-cured sausages Original Research Article
690
Technological and safety characterization of coagulase-negative staphylococci from traditionally fermented sausages of Basilicata region (Southern Italy)
691
Technological and safety properties display biodiversity among enterococci isolated from two Egyptian cheeses, “Ras” and “Domiati”
692
Technological and safety properties of lactic acid bacteria isolated from Spanish dry-cured sausages
693
Technological and safety properties of Lactobacillus plantarum strains isolated from a Tunisian traditional salted meat
694
Technological and scientific landscape of laser cladding process in 2007
695
Technological and sensorial evaluation of Lactobacillus strains as starter cultures in fermented sausages
696
Technological and sensory characteristics of reduced/low-fat, low-salt frankfurters as affected by the addition of konjac and seaweed
697
Technological and social changes into the third millennium and the impact on refrigeration
698
TECHNOLOGICAL an‎d SOCIAL TRANSFORMATION OF THE WORLD: OMNITEMPORAL ‘DREAMS’ OF KUROSAWA
699
TECHNOLOGICAL AND TECHNICAL CHANGES OF AGRICULTURAL PRODUCTION IN SERBIA
700
Technological Anisotropy of Artificial Stone and Practical Use of This Phenomenon
701
Technological applications of dispersions: Surfactant Science Series 52, edited by R.B. McKay, Marcel Dekker, 1994, 560 pp., US$ 195.00, ISBN 0-8247-9180
702
Technological aspects as the main impact on quality of quince liquors
703
Technological aspects for thermal plasma treatment of municipal solid waste—A review
704
Technological aspects of development of pixel and strip detectors based on CdTe and CdZnTe
705
Technological aspects of development of pixel and strip detectors based on CdTe and CdZnTe
706
Technological aspects of fabrication of semimagnetic semiconductor nanocrystals
707
Technological aspects of flexible CIGS solar cells and modules
708
Technological aspects of high-Tc superconductors
709
Technological aspects of liquid lithium limiter experiment on FTU tokamak
710
Technological aspects of lithium capillary-pore systems application in tokamak device
711
Technological aspects of oxidated porous silicon waveguides
712
TECHNOLOGICAL ASPECTS OF WASTEWATER MANAGEMENT IN COASTAL TOURIST AREAS
713
TECHNOLOGICAL ASPECTS OF WASTEWATER MANAGEMENT IN COASTAL TOURIST AREAS
714
Technological assessment of a mining-waste dump at the Dexing copper mine, China, for possible conversion to an in situ bioleaching operation
715
Technological assessment of palm oil production in Osun and Ondo states of Nigeria
716
Technological asymmetry and joint product development
717
Technological blending in the age of the Internet: A developing country perspective
718
Technological breakthroughs lower the cost of broadband service to isolated custome rs
719
Technological capabilities assessment in the transformer industry: A case-study of investigating technological capabilities in Iran-Transfo Company
720
Technological capabilities, invisible infrastructure and the un-social construction of predictability: the overlooked fixed costs of useful research
721
Technological capability assessment as an input for strategic planning: Case studies at Electricité de France and Electricity Generating Authority of Thailand
722
Technological capability assessment of a firm in the electricity sector
723
Technological capability of synthesis of inorganic oxides in water fluid in neighborhood of critical point
724
Technological capability of the micro-enterprises in Kenyaʹs informal sector
725
Technological capability, social capital and the launch strategy for innovative products
726
Technological catastrophes: their causes and prevention
727
Technological challenges associated with the sequestration of CO2 in the ocean
728
Technological challenges of ITER diagnostics
729
Technological challenges to X-ray FELs
730
Technological challenges to X-ray FELs
731
Technological change and depletion in offshore oil and gas
732
Technological change and efficiency in the presence of quasi-fixed inputs: A DEA application to the hospital sector
733
Technological change and fisheries sustainability: The point of view of Adaptive Dynamics
734
Technological change and fisheries sustainability: The point of view of Adaptive Dynamics
735
Technological Change and its Relationship with Total Factor Productivity in Iran's Petroleum Refineries
736
Technological change and market structure: An evolutionary approac
737
Technological change and network dynamics: Lessons from the pharmaceutical industry
738
Technological change and petroleum exploration in the Gulf of Mexico
739
Technological change and risk management: an application to the economics of corn production
740
Technological change and social forecasting: the case of telecommuting as a travel substitute
741
Technological change and the age–earnings profile: Evidence from the International Merchant Marine, 1861–1912
742
Technological change and the distribution of schooling: evidence from green-revolution India
743
Technological Change and the Dynamics of Resource Scarcity Measures
744
Technological Change and the Environme nt: Arnulf Grübler, Nebojsa Nakicenovic, William D. Nordhaus (Eds.), Resources for the Future Press, Washington, DC, 2002, 450 pp., ISBN 1 891853-46-5
745
Technological change and the environment: Arnulf Grübler, Nebojsa Nakicenovic and William D. Nordhaus (Eds.); Resources for the Future, Washington, DC and International Institute for Applied Systems Analysis, Laxenburg, Austria, 2002
746
Technological Change and the Environmental Imperative: Challenges to the Copper Industry: Claes Brundenius (Ed.); Edward Elgar, 2003, 182 pages, ISBN 1-84064-633-0
747
Technological change and the growing inequality in managerial compensation
748
Technological change and the households’ demand for currency
749
Technological change and the regulation of pollution from agricultural pesticides
750
Technological Change and the Scale of Production
751
Technological change and the technology intelligence process: a case study
752
Technological change and the timing of mitigation measures
753
Technological change as a trade-off between social construction and technological paradigms
754
Technological change in economic models of environmental policy: a survey
755
Technological change in energy systems: Learning curves, logistic curves and input–output coefficients
756
Technological change in markets with network externalitie
757
Technological change in optimal non-linear pricing
758
Technological change in optimal non-linear pricing
759
Technological change of the energy innovation system: From oil-based to bio-based energy
760
Technological change, growth and waste recycling
761
Technological change, organizational change, and job turnover
762
Technological change, relative wages, and unemployment
763
Technological change, trade and the environment
764
Technological Change, Universal Access, and the End of the Library
765
Technological change: Rediscovering the engine of productivity growth in Chinaʹs rural economy
766
Technological Changes in Prehistoric Ceramics from Eastern Puerto Rico: An Exploratory Study
767
Technological changes––the impact on the raw material flow and production
768
Technological characterisation by free zone capillary electrophoresis (FCZE) of the vegetable rennet (Cynara cardunculus) used in “Torta del Casar” cheese-making
769
Technological characterisation of thermoshrinking cross-linked polyethylene by destructive and non-destructive techniques
770
Technological characterization and ceramic application of gravel pit by-products from middle-course Jarama river deposits (central Spain)
771
Technological characterization and industrial application of two Turkish clays for the ceramic industry
772
Technological characterization and probiotic traits of yeasts isolated from Altamura sourdough to select promising microorganisms as functional starter cultures for cereal-based products Original Research Article
773
Technological characterization of a bacteriocin-producing Lactobacillus sakei and its use in fermented sausages production
774
Technological characterization of bacteriocin producing Lactococcus lactis strains employed to control Listeria monocytogenes in Cottage cheese
775
Technological characterization of Geotrichum candidum strains isolated from a traditional Spanish goats’ milk cheese Original Research Article
776
Technological characterization of kaolin tailing from small-scale mining in RN and PB states – Brazil
777
Technological characterization of kaolin: Study of the case of the Borborema–Seridó region (Brazil)
778
Technological characterization of Lactobacillus isolates from traditional Manchego cheese for potential use as adjunct starter cultures
779
Technological characterization of riacho dos machados gold ore for cyanide leaching and study of the utilization of oxidising agents
780
Technological choice and network externalities: a catastrophe model analysis of firm software adoption for competing operating systems
781
Technological choice of Chinese rice farmers
782
Technological clusters with a knowledge-based principle: evidence from a Delphi investigation in the French case of the life sciences
783
Technological collaboration patterns in solar cell industry based on patent inventors and assignees analysis
784
Technological competencies and productʹs evolutionary dynamics a case study from the aero-engine industry
785
Technological competition in network markets with policy implications
786
Technological competition, strategies of the firms and the choice of the first users: the case of road guidance technologies
787
Technological competitiveness, trade and foreign direct investme nt
788
Technological complexity and economic growth
789
Technological conception of an optical biosensor with a disposable card for use with bioluminescent bacteria
790
Technological conditions influence aminogenesis during spontaneous sausage fermentation
791
Technological considerations in the utilisation and maintenance of household kitchen equipment
792
Technological convergence, globalisation and ownership in the UK computer industry
793
Technological convergence, R&D, trade and productivity growth
794
Technological convergence: a strategic perspective
795
Technological cooperation and product substitution in UK retail banking: the case of customer services
796
Technological cooperative agreements and firmʹs R & D intensity. A note on causality relations
797
Technological dependence in Africa: its nature, causes, consequences and policy derivatives
798
Technological developme nt and rates of return to investme nt in a catching-up economy: the case of South Kore
799
Technological Development and Foreign Patenting: Evidence from 19th-Century Australia
800
Technological development and medical productivity: the diffusion of angioplasty in New York state
801
Technological development and occupational accidents as a conditional relationship: A study of over eighty years in the Swedish Mining industry
802
Technological development and political stability: Patenting in Latin America and the Caribbean
803
Technological development and progress of plasma performance on the JT-60U
804
Technological development and strategies for achieving energy security and constraints
805
Technological development and strategies for achieving energy security and Tconstraints
806
Technological development in the Stirling cycle engines
807
Technological development of Brazilian telecommunications in past decades
808
Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC)
809
Technological development of the RFX energy transfer, protection and switching systems
810
Technological developments
811
Technological developments and socio-economic issues of wireless mobile communications
812
Technological developments section
813
Technological diffusion and preference learning in the world of Homo sustinens: The challenges for politics
814
Technological Diffusion and Productivity Convergence: A Study for Manufacturing in the OECD
815
Technological Dimension of Pre-School Teacher Training at Tertiary School: Fine Arts Concept- based Case Study
816
Technological discontinuities and media patterns: assessing electric vehicle batteries
817
Technological Discontinuities: Is Co-operation an Option?
818
Technological diversification in the multinational corporation—historical evolution and future prospects
819
Technological diversity in an evolutionary industry model with localized learning and network externalities
820
Technological diversity of emerging eco-innovations: a case study of the automobile industry
821
Technological diversity of persistent innovators in Japan: Two case studies of large Japanese firms
822
Technological drivers in data centers and telecom systems: Multiscale thermal, electrical, and energy management
823
Technological dynamism in Asia
824
Technological Ecosystems in Health Informatics: A Brief Review Article
825
Technological Ecosystems in Health Informatics: A Brief Review Article
826
Technological effort, technological capabilities and economic performance: A case study of the paper manufacturing sector in West Java
827
Technological enhancement and creation of a computer-aided construction system for the shotcreting robot
828
Technological enhancement of natural radionuclides in the marine environment
829
Technological entrepreneurship in emerging regions
830
Technological entrepreneurship: Integrating technological and product innovation
831
Technological entry, exit and survival: an empirical analysis of patent data
832
Technological environmental innovations (TEIs) in a chain-analytical and life-cycle-analytical perspective
833
Technological evaluation of a novel glycerol based biocide-free metalworking fluid
834
Technological evolution — an analysis within the knowledge-based approach
835
Technological expectation and consumer preferences for product form
836
Technological experiments and mathematical modeling of the fluid dynamics and heat transfer in gallium arsenide single-crystal growth processes
837
Technological externalities and economies of vertical integration in the electric utility industry
838
Technological Factors and Adoption of Green Innovation - Moderating Role of Government Intervention: A Case of SMEs in Pakistan
839
Technological features of Renaissance pottery from Deruta (Umbria, Italy): An experimental study
840
Technological Features of Roman Terra Sigillata from Gallic and Italian Centres of Production
841
TECHNOLOGICAL FEATURES OF SHAPE AND SHEET PRODUCTION FROM HIGH-STRENGTH SPHEROIDAL GRAPHITE IRON
842
Technological features of the ‘Cotto Variegato’: a petrological approach
843
Technological fingerprints of Black-Gloss Ware from Motya (Western Sicily, Italy)
844
Technological foresight—the use of biotechnology in the development of new drugs against breast cancer
845
Technological frames of car engines
846
Technological frames of car engines
847
Technological functionality, sensory properties, and nutritional value of pasta products enriched with different dietary fiber resources: a review
848
Technological fusion and telemedicine in Japanese companies
849
Technological gaps: an important episode in the construction of S&T statistics
850
Technological globalisation and innovative centres: the role of corporate technological leadership and locational hierarchy
851
Technological heredity – A decisive factor for tribological features of regenerated gears
852
Technological impact factor: An indicator to measure the impact of academic publications on practical innovation
853
Technological impact on energy consumption in rainfed soybean cultivation in Madhya Pradesh
854
Technological implications for RICH performance
855
Technological implications for RICH performance
856
Technological implications of addition of wheat dietary fibre to giant squid (Dosidicus gigas) surimi gels Original Research Article
857
Technological Implications of Supply Chain Practices in Agri-Food Sector- A Review
858
Technological improvements in vaccine efficacy and individual incentive to vaccinate
859
Technological improvements in vaccine efficacy and individual incentive to vaccinate
860
Technological incubators and the social construction of innovation networks: an Israeli case study
861
Technological inefficiency and the skewness of the error component in stochastic frontier analysis
862
Technological information in the patent offices of the MERCOSUR countries and Mexico
863
Technological infrastructure for PKI and digital certification
864
Technological infrastructure policy (TIP): Creating capabilities and building markets
865
Technological infrastructure policy: An international perspective : M. Teubal, D. Foray, M. Justman and E. Zuscovitch (eds.), Kluwer Academic, Dordrecht, xvi + 372 pp., ISBN 0-7923-3835-9
866
Technological innovation activities in Turkey: the case of manufacturing industry, 1995–1997
867
Technological Innovation and Economic Performance,: edited by Benn Steil, David Victor, Richard Nelson, A Council of Foreign Relations Book, Princeton University Press, Princeton, New Jersey, 2002, ISBN # 0-691-08874-8, $75.00.
868
TECHNOLOGICAL INNOVATION AND ENTREPRENEURSHIP FROM THE WESTERN AND ISLAMIC PERSPECTIVES
869
TECHNOLOGICAL INNOVATION AND FIRM DEVELOPMENT: THE CASE OF INFOVALLEY DIGITAL AUTOPSYSYSTEM COMMERCIALISATION
870
Technological innovation and market turbulence: The dot-com experience
871
Technological innovation and network evolution : Anders Lundgren, (Routledge, London and New York, 1995) xiv + 266 pp., ISBN 0-415-08219-6
872
Technological innovation and organizational change revisited
873
Technological innovation and real investment booms and busts
874
Technological innovation and the formation of Japanese technology: the case of the machine tool industry
875
Technological innovation and the U.S. banking industry: Innovation in the U.S. retail and wholesale banking sectors
876
Technological innovation and Western values
877
Technological innovation as an unusual and non-biological evolutionary process: John Ziman (Ed.) Technological Innovation as an Evolutionary Process; Cambridge University Press, Cambridge, 2000, xvii + 379 pp., hardback, ISBN 0-521-62361-8
878
Technological Innovation Assessment of Business-to- Business Electronic Marketplaces
879
Technological innovation for the production of drinking water by membrane processes Original Research Article
880
Technological innovation in services and manufacturing: results from Italian surveys
881
Technological innovation in the energy sector: R&D, deployment, and learning-by-doing
882
Technological innovation policies to promote renewable energies: Lessons from the European experience for the Brazilian case
883
Technological innovation processes revisited
884
Technological innovation, energy efficient design and the rebound effect
885
Technological innovations and 3G mobile phone diffusion: Lessons learned from Japan
886
Technological innovations and aggregate risk premiums
887
Technological Innovations and Consumer Needs: An Analysis of Mobile Communications Market
888
Technological innovations and industry clustering in the bicycle industry in Taiwan
889
Technological innovations and its influence on the growth of auto component SMEs of Bangalore: A case study approach
890
Technological innovations and its influence on the growth of auto component SMEs of Bangalore: A case study approach
891
Technological innovations by SMEʹs in India
892
Technological innovations in asthma patient monitoring and care
893
Technological innovations in deep coal mine power systems
894
Technological innovations in grocery retailing: retrospect and prospect
895
Technological innovations, organizational change and workplace accident prevention
896
Technological innovations: a framework for communicating diffusion effects
897
Technological innovations: a framework for communicating diffusion effects
898
Technological insights into the ancient ceramic beehive production of Agathonisi island, Greece
899
Technological internationalisation in the electro-technical industry: a cross-company comparison of patenting patterns 1986–2000
900
Technological invention to product innovation: A project management approach
901
Technological invention: Post-modernism and social structure
902
Technological issues and high gradient test results on X-band molybdenum accelerating structures
903
Technological issues and high gradient test results on X-band molybdenum accelerating structures
904
Technological issues for the development of more efficient calcium phosphate bone cements: A critical assessment
905
Technological knowledge base, R&D organization structure and alliance formation: Evidence from the biopharmaceutical industry
906
Technological Knowledge, Innovation and Risk-taking Capability and International New Venture’s Performance
907
Technological learning and cost reductions in wood fuel supply chains in Sweden
908
Technological learning and renewable energy costs: implications for US renewable energy policy
909
Technological learning by national R&D: the case of Korea in CANDU-type nuclear fuel
910
Technological learning for carbon capture and sequestration technologies
911
Technological learning for entrepreneurial development (TL4ED) in the knowledge economy (KE): Case studies and lessons learned
912
Technological learning in bioenergy systems
913
Technological learning in China’s colour TV (CTV) industry
914
Technological learning in energy–environment–economy modelling: A survey
915
Technological learning in offshore wind energy: Different roles of the government
916
Technological learning, knowledge management, firm growth and performance: an introductory essay
917
TECHNOLOGICAL LEVEL OF MACHINES IN PRODUCTION PROCESS OF SCREWS
918
Technological limitations and processing-generated defects at the development of pixel and strip arrays
919
Technological limitations and processing-generated defects at the development of pixel and strip arrays
920
Technological lock-in, positive institutional feedback, and research on laboratory animals
921
Technological mineralogy: development of a comprehensive assessment of titanium ores (exemplified by the Pizhemskoye deposit)
922
Technological modelling for graphical models: an approach based on genetic algorithms
923
Technological modification of spinel-based CuxNi1–x–yCo2yMn2–yO4 ceramics
924
Technological newness: An empirical study in the process industries
925
Technological novelty and open-endedness: Two characteristics of interactive exhibits that contribute to the holding of visitor attention in a science museum
926
Technological opportunism and firm performance: Moderating contexts
927
Technological opportunism effects on IT adoption, intra-firm diffusion and performance: Evidence from the U.S. and Spain
928
Technological options for waste minimisation in the mining industry
929
Technological outsourcing and product diversification: do markets for technology affect firms’ strategies?
930
Technological overlap and interfirm cooperation: implications for the resource-based view of the firm
931
Technological Parameter Optimization for Epoxidation of Methallyl Alcohol by Hydrogen Peroxide over TS-1 Catalyst
932
Technological parameters evaluation of gas quenching based on the finite element method
933
Technological parameters of fine tube-sheet joints brazed by scanning electron beam heat
934
Technological Pedagogical Content Knowledge In Malay Literature: The Roles Of Malay Literature Teachers In SPN 21
935
Technological penetration and organizational learning in SMEs: The cumulative effect
936
Technological Performances of Isolated Heterofermentative Lactobacillus Alone or in Coculture with Isolated Streptococcus thermophilus
937
Technological plasticity studies of the FeAl intermetallic phase-based alloy
938
Technological Potential of Lactobacillus Strains Isolated from Fermented Green Olives: In Vitro Studies with Emphasis on Oleuropein-Degrading Capability
939
Technological problems in systems approach of greening
940
Technological process for a new silicon solar cell structure with honeycomb textured front surface
941
Technological processes of feed manufacturing affect protein endogenous losses and amino acid availability for body protein deposition in pigs
942
Technological progress and Chinese agricultural growth in the 1990s
943
Technological progress and long-term energy demand — a survey of recent approaches and a Danish case
944
Technological progress and sustainable development: what about the rebound effect?
945
Technological progress and the availability of European oil and gas resources
946
Technological Progress, Job Creation, and Job Destruction
947
Technological progress, structural change and productivity growth: a comme nt
948
Technological progress, structural change and productivity growth: a comparative study
949
Technological properties and biological value of milk of cows when using ‘gumifit’ and ‘maks super gumat’ food additives in their diet
950
Technological properties and enhancement of antifungal activity of a Paeonia rockii extract encapsulated in a chitosan-based matrix Original Research Article
951
Technological properties and non-enzymatic browning of white lupin protein enriched spaghetti
952
Technological properties of celsian reinforced glass matrix composites
953
Technological properties of glass-ceramic tiles obtained using rice husk ash as silica precursor
954
Technological properties of Lactobacillus plantarum strains isolated from Chinese traditional low salt fermented whole fish
955
Technological properties of natural hog casings treated with surfactant solutions Original Research Article
956
Technological properties of wingnut (Pterocarya fraxinifolia (LAM.) Spach.) wood and characteristics of plywood from wingnut wood
957
Technological prospects and CO2 emission trading analyses in the iron and steel industry: A global model
958
Technological proximity and co-movements of stock returns
959
Technological quality of bread from rice flour with Spirulina
960
Technological Readiness for Teaching Practices in Immersive Learning Environments Open Sim
961
Technological regimes and innovation in services: the case of the Italian banking industry
962
Technological regimes, catching-up and leapfrogging: findings from the Korean industries
963
Technological regimes, path dependency and the environment
964
Technological regimes: an analytical framework for the evaluation of technological systems
965
Technological Relevance of Science: An Assessment of Citation Linkages between Patents and Research Papers
966
Technological Reliance: A Cautionary Tale for Training Cardiologists
967
Technological returns to scale: Identification and visualization
968
Technological review of the HRP manufacturing process R&D activity
969
Technological review on solar PV in Pakistan: Scope, practices and recommendations for optimized system design
970
Technological Revolutions and Financial Capital: Carlota Perez, Edward Elgar, Cheltenham, UK, 2002, 224 pp., Hardcover, ISBN: 1840649224
971
Technological revolutions and financial capital: the dynamics of bubbles and golden ages: Carlota Perez (Ed.), 2002, pp 198 including index and bibliography, ISBN 1 84064 922 4 Hardback, £45. Paperback, £19.95.
972
Technological revolutions and the formation of strategic groups
973
Technological revolutions in Pasinettiʹs model of structural change: productivity and prices
974
Technological scope: diversified or specialized
975
Technological shifts in surface metrology
976
Technological solutions for protecting privacy
977
technological solutions for screening and geolocation of covid-19 infected people: a country comparison approach
978
Technological sovereignty of the Russian Federation fuel and energy complex
979
Technological specialization and patenting strategies in East Asia — Insights from the electronics industry
980
Technological spillovers and patterns of growth with sector-specific R&D
981
Technological spillovers of transferred inventors from the perspective of Social Network Analysis (SNA)
982
Technological spillovers within multi-region models: Intertemporal optimization beyond the Negishi approach
983
Technological status of CdTe photovoltaics
984
Technological status of Cu(In,Ga)(Se,S)2-based photovoltaics
985
Technological status of Cu2ZnSn(S,Se)4 thin film solar cells
986
Technological status of organic photovoltaics (OPV)
987
Technological status of plasma-deposited thin-film silicon photovoltaics
988
Technological status of polycrystalline silicon thin-film solar cells on glass
989
Technological stigmatism, risk perception, and truth
990
Technological Strains Of Bacillus Thuringiensis For Development The Biopreparations
991
Technological stress: Psychophysiological symptoms in modern offices
992
Technological Studies on Residues of Some Pesticides on Some Vegetables (Broccoli and Eggplants)
993
TECHNOLOGICAL STUDIES ON SOFT CHEESE
994
Technological study of liquid die forging for the aluminum alloy connecting rod of an air compressor
995
TECHNOLOGICAL STUDY OF RING AND COMPACT SPINNING SYSTEMS FOR THE MANUFACTURING OF SLUB FANCY YARN UNDER MULTIPLE SLUB VARIATIONS AND ITS EFFECT ON WOVEN FABRIC
996
Technological study of the hydraulic extrusion–bulge forming of a three-way tube
997
Technological support for decision making in a safety critical environmen
998
Technological support for teaching and learning: computer-mediated communications in higher education (CMC in HE)
999
Technological system and renewable energy policy: A case study of solar photovoltaic in Taiwan
1000
Technological systems and competent procurers—the transformation of Nokia and the Finnish telecom industry revisited?