<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Thermal Behavior of a Natural Sepiolite
2
THERMAL BEHAVIOR OF A NEW TYPE OF MULTI-LAYERED POROUS AIR HEATER
3
Thermal behavior of a novel micro-fuel cell-based methanol concentration sensor
4
Thermal behavior of a novel type see-through glazing system with integrated PV cells
5
Thermal behavior of a porous electric heater
6
Thermal behavior of a series of monomeric Ni(II) complexes with β-iminoketones
7
Thermal behavior of a small salinity-gradient solar pond with wall shading effect
8
Thermal Behavior of a Stagnant Gas Confined in a Horizontal Microchannel as Described by the Dual-Phase-Lag Heat Conduction Model
9
Thermal behavior of a zinc–chromium–sulfate lamellar double hydroxide revisited as a function of vacuum and moisture parameters Original Research Article
10
Thermal Behavior of Activated Carbon Cloths Heated by Joule Effect
11
Thermal behavior of Al/MoO3 xerogel nanocomposites
12
Thermal Behavior of Alkaline Lead Acetate, a Study of Thermogravimetry and Differential Scanning Calorimetry
13
Thermal behavior of aluminum fluoride trihydrate
14
Thermal behavior of aluminum powder and potassium perchlorate mixtures by DTA and TG
15
Thermal behavior of an electrical motor through a reduced model
16
Thermal behavior of Bi5Pb3O10.5
17
Thermal behavior of biodegraded lime wood Original Research Article
18
Thermal behavior of brominated and polybrominated compounds I: closed vessel conditions
19
Thermal behavior of brominated and polybrominated compounds II: Pyroproducts of brominated phenols as mechanistic tools
20
Thermal behavior of building material containing microencapsulated PCM
21
Thermal Behavior of Carboxymethyl Cellulose Containing Alumina Nanoparticles at the Entrance Region of an Annulus
22
Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose
23
Thermal behavior of cement matrix with high-volume mineral admixtures at early hydration age
24
Thermal behavior of chromium electroplating sludge
25
Thermal behavior of cinnamyl diesters studied by the TG/FTIR/QMS in inert atmosphere
26
Thermal behavior of cinnamyl diesters studied by the TG/FTIR/QMS in inert atmosphere
27
Thermal behavior of coal-tar pitch modified with BMI resin
28
Thermal behavior of coal-tar pitch modified with BMI resin
29
Thermal behavior of corn fibers and corn fiber gums prepared in fiber processing to ethanol
30
Thermal behavior of corn fibers and corn fiber gums prepared in fiber processing to ethanol
31
Thermal behavior of Cu–Co bimetallic clusters
32
Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations
33
Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations
34
Thermal behavior of delithiated Li(Ni0.8Co0.15Al0.05)O2 and Li1.1(Ni1/3Co1/3Mn1/3)0.9O2 powders
35
Thermal Behavior of Double Skin Facade in Terms of Energy Consumption in the Climate of North of Iran-Rasht
36
Thermal behavior of Et4N10BH4 and (Et4N)2B20H18
37
Thermal behavior of ethylene/1octene copolymer fractions at high temperatures: Effect of hexyl branch content
38
Thermal behavior of floating gate oxide defects (moving bits)
39
Thermal behavior of fullerenes in different gas atmospheres Original Research Article
40
Thermal behavior of GeO2 doped PbO–B2O3–ZnO–Bi2O3 glasses
41
Thermal behavior of goethite during transformation to hematite
42
Thermal behavior of gum arabic in comparison with cashew gum
43
Thermal behavior of horizontally mixed surfaces on Mars
44
Thermal behavior of hydrogen atom intercalated between two layers of C150H30 graphite plane: MD simulation Original Research Article
45
Thermal behavior of isotactic polypropylene freeze-extracted from solutions with varying concentrations
46
Thermal behavior of K2MSi3O9·H2O with the structure of umbite (M = Sn) and kostylevite (M = Pb) minerals
47
Thermal behavior of lignocellulosic materials under aerobic/anaerobic environments
48
Thermal behavior of liquefied wood polymer composites (LWPC)
49
Thermal behavior of longitudinal convective–radiative porous fins with different section shapes and ceramic materials (SiC and Si3N4)
50
Thermal behavior of magnetically modalized poly(N-isopropylacrylamide)-chitosan based nanohydrogel
51
Thermal behavior of masonry walls in Istanbul
52
Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling
53
Thermal behavior of mixtures of bentonitic clay and saline solutions
54
thermal behavior of monocrystalline silicon solar cells: a numerical and experimental investigation on the module encapsulation materials
55
Thermal behavior of nano-silver clay in the application of handmade jewelry
56
Thermal behavior of native, washed and steam exploded lignocellulosic biomass samples
57
Thermal behavior of native, washed and steam exploded lignocellulosic biomass samples
58
Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion Original Research Article
59
Thermal behavior of Ni- and Cu-containing plasma electrolytic oxide coatings on titanium
60
Thermal behavior of nitrided TiO2/In2O3 by TG–DSC–MS combined with PulseTA
61
Thermal behavior of novel non-sonicated arsonolipid-containing liposomes Original Research Article
62
Thermal behavior of organotin(IV) triazolates: Molecular precursors for pure-phase, nanosized SnS/SnO2
63
Thermal behavior of overcharged nickel/metal hydride batteries
64
Thermal Behavior of Oxometalate (Mo, W)-Intercalated Layered Double Hydroxides: Study of the Grafting Phenomenon
65
Thermal behavior of pentaerythritol diazido dinitrate
66
Thermal Behavior of Perfect and Imperfect Contact Composite Slabs Under the Effect of the Hyperbolic Heat Conduction Model
67
Thermal behavior of phosphorus derivatives of hydrogenated cardanol
68
Thermal behavior of polarized Pd/D electrodes prepared by co-deposition
69
Thermal behavior of polyacetylacetonatozirconium (PAZ)
70
Thermal behavior of renewable diesel from sugar cane, biodiesel, fossil diesel and their blends
71
Thermal behavior of Si-doped fullerenes vs their structural stability at T = 0 K: A density functional study
72
Thermal behavior of silver-containing mesogenic cyanobiphenyl films
73
Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles
74
Thermal behavior of sol–gel derived phosphate ceramics Original Research Article
75
Thermal behavior of spiral fin-and-tube heat exchanger having fly ash deposit
76
Thermal behavior of SrSO4–SrCO3 and SrSO4–SrCO3–Al2O3 mixtures
77
Thermal behavior of Sterculia striata oil
78
Thermal behavior of substituted FeCo-based metallic glasses
79
Thermal behavior of supersolidus bronze powder compacts during heating by hollow cathode discharge
80
Thermal behavior of supersolidus bronze powder compacts during heating by hollow cathode discharge
81
Thermal behavior of surface plasmon resonance in dynamic suprastructure multilayer
82
Thermal behavior of syndiotactic E-1,2-poly(3-methyl-1,3-pentadiene)
83
Thermal behavior of tetrapyrrole derivatives and their mixed complexes
84
Thermal behavior of the amorphous precursors in the ZrO2–CrO1.5 system
85
Thermal behavior of the amorphous precursors of the HfO2–Fe2O3 system
86
Thermal behavior of the amorphous precursors of the ZrO2–SnO2 system
87
Thermal behavior of the epoxy and polyester powder coatings using thermogravimetry/differential thermal analysis coupled gas chromatography/mass spectrometry (TG/DTA–GC/MS) technique: identification of the degradation products
88
THERMAL BEHAVIOR OF THE INDIUM PARTICLES DISPERSED IN OIL
89
Thermal behavior of the KSbMoO6 ionic conductive ceramic
90
Thermal behavior of the KSbMoO6 ionic conductive ceramic
91
Thermal behavior of the LHCD launchers in Tore Supra
92
Thermal behavior of the nonstoichiometric lithium niobate powders synthesized via a combustion method
93
Thermal behavior of the phenol–Pd–ACC system Original Research Article
94
Thermal behavior of the roughened Cu(110) surface
95
Thermal behavior of the saccharinates of K+, Na+, Rb+, Cs+ and NH4+: structural inferences
96
Thermal behavior of the YAG precursor prepared by sol–gel combustion process
97
Thermal behavior of Ti-precursor sols for porous TiO2 thin films
98
Thermal Behavior of Up to Down Vertical Flame Using Iraqi (LPG) As Fuel
99
Thermal behavior of vanadocene
100
Thermal behavior of vanadyl complexes with Schiff bases derived from trans-N,N′-bis(salicylidene)-1,2-cyclohexadiamine (t-Salcn)
101
Thermal behavior of various zinc cyclo-phosphates
102
THERMAL BEHAVIOR OF WATER FLOWING THROUGH PACKED BED SUBJECTED TO WALL HEAT FLUX
103
Thermal behavior of Zn and Cd complexes intercalated into γ-zirconium phosphate: Synthesis and physical–chemical characterization
104
Thermal Behavior of α-Alkylated Oligothiophenes
105
Thermal behavior, FT-IR spectroscopy and water durability of Li_2O–PbO–ZnO–P_2O_5 glasses
106
Thermal behavior, microstructure and protein quality of squid fillets dried by far-infrared assisted heat pump drying
107
Thermal behavior, microstructure, phase transformation, and crystal growth kinetics of nano-scale Fe3+-doped TiO2 xerogel powders
108
Thermal behaviors and grafting process of LDH/benzene derivative hybrid systems
109
Thermal behaviors of Al-based amorphous alloys bearing nanocrystalline In particles Original Research Article
110
Thermal behaviors of concrete and steel bridges after slab replacements with GFRP honeycomb sandwich panels
111
Thermal behaviors of doped polyaniline
112
Thermal behaviors of intrinsic polyaniline and its derivatives
113
Thermal behaviors of lithium in and on the two layers of C150H30 graphite plane: MD simulation Original Research Article
114
Thermal behaviors of lithium-ion cells during overcharge
115
Thermal behaviors of mechanically activated pyrites by thermogravimetry (TG)
116
Thermal behaviors of Ni-MH batteries using a novel impedance spectroscopy
117
Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method
118
Thermal behaviour and catalytic properties towards propene combustion of zirconia modified by different first row transition metals
119
Thermal behaviour and catalytic properties towards propene combustion of zirconia modified by different first row transition metals
120
Thermal Behaviour and Improved Properties of SBR and SBR/Natural Bitumen Modified Bitumens
121
Thermal behaviour and interactions of cassava starch filled with glycerol plasticized polyvinyl alcohol blends
122
Thermal behaviour and kinetic study for woody biomass torrefaction and torrefied biomass pyrolysis by TGA
123
Thermal behaviour and kinetics of alga Polysiphonia elongata biomass during pyrolysis
124
Thermal behaviour and kinetics of coal/biomass blends during co-combustion
125
Thermal behaviour and reactivity of green petroleum cokes used as additives in metallurgical cokemaking
126
Thermal behaviour and structural properties of surfactant—Picrate compounds: The effect of the ammonium headgroup number
127
Thermal behaviour and superheating temperature of Kaolinite from molecular dynamics
128
Thermal behaviour and transport properties of liquid crystalline polymers: Phase organization in a thermotropic polyester
129
Thermal behaviour and ventilation efficiency of a low-cost passive solar energy efficient house
130
Thermal behaviour during the pyrolysis of low rank perhydrous coals
131
Thermal behaviour modelling of tapered optical fibres for scanning near-field microscopy
132
Thermal behaviour modelling of tapered optical fibres for scanning near-field microscopy
133
Thermal behaviour of a direct-current traction motor driving a railway train
134
Thermal behaviour of a heated building under random weather condition in Warsaw
135
Thermal behaviour of a series of poly[B-(methylamino)borazine] for the preparation of boron nitride fibers
136
Thermal behaviour of a zeolitic tuff
137
Thermal behaviour of acrylonitrile copolymers having methacrylic and itaconic acid comonomers
138
Thermal behaviour of adobe constructions
139
Thermal behaviour of alumina precursor obtained by the aluminium sulphate–urea reaction in boiling aqueous solution
140
Thermal behaviour of aluminas with different morphologies
141
Thermal behaviour of aluminas with different morphologies
142
Thermal behaviour of an eighteenth-century Athenian dwelling
143
Thermal behaviour of arsenic oxides (As2O5 and As2O3) and the influence of reducing agents (glucose and activated carbon)
144
Thermal behaviour of CANDU type fuel rods during steady state and transient operating conditions
145
Thermal behaviour of carbonaceous aerosol from a continental background site
146
Thermal behaviour of cesium implanted in cubic zirconia
147
Thermal behaviour of chlorine in nuclear graphite at a microscopic scale
148
Thermal behaviour of chrome shavings and of sludges recovered after digestion of tanned solid wastes with calcium hydroxide
149
Thermal behaviour of clay mixtures with bauxite residue for the production of heavy-clay ceramics
150
Thermal behaviour of clays for traditional ceramics with soda–lime–silica waste glass admixture
151
Thermal behaviour of closed wet cooling towers for use with chilled ceilings
152
Thermal behaviour of coal/biomass blends during co-pyrolysis
153
Thermal behaviour of CorSirWrSi multilayers under high intensity excimer laser pulses
154
Thermal behaviour of CorSirWrSi multilayers under high intensity excimer laser pulses
155
Thermal behaviour of CorSirWrSi multilayers under rapid thermal annealing
156
Thermal behaviour of CpCuPEt3 in gas phase and Cu thin films processing
157
Thermal behaviour of crystal and domain structure of LSGMn-05 anode material for SOFC
158
Thermal behaviour of Cu–Mg–Mn and Ni–Mg–Mn layered double hydroxides and characterization of formed oxides
159
Thermal behaviour of CuO doped phase-stabilised ammonium nitrate
160
Thermal behaviour of d-mannitol when used as PCM: Comparison of results obtained by DSC and in a thermal energy storage unit at pilot plant scale
161
Thermal behaviour of front-end multi-chip modules
162
Thermal behaviour of front-end multi-chip modules
163
Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing
164
Thermal behaviour of geothermal wells using mud and air–water mixtures as drilling fluids
165
Thermal behaviour of hard nanocomposite coatings within the W–Si–N system in oxidant and protective atmospheres
166
Thermal behaviour of helium-implanted spinel single crystals
167
Thermal behaviour of high-temperature superconducting fault current limiters: Application to microlimiters Original Research Article
168
Thermal behaviour of hydrated lysozyme in the presence of sucrose and trehalose by EINS
169
Thermal behaviour of hydrogen in Zircaloy corrosion layers
170
Thermal behaviour of induction motors under different speeds
171
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
172
Thermal behaviour of integrated solar collector/storage unit with 65 °C phase change material
173
Thermal behaviour of interactive mechanically ventilated double glazed façade: Non-dimensional analysis
174
Thermal behaviour of La0.8Sr0.2Fe1−xGaxO3−δ (x = 0 or x = 0.3)
175
Thermal behaviour of lignocellulosic material in the presence of phosphoric acid. Influence of the acid content in the initial solution
176
Thermal behaviour of low and high molecular weight paraffin waxes used for designing phase change materials
177
Thermal behaviour of lyophilized egg yolk and egg yolk fractions Original Research Article
178
Thermal behaviour of magnesium-containing fluorapatite
179
Thermal behaviour of malonic acid, sodium malonate and its compounds with some bivalent transition metal ions
180
Thermal behaviour of mandelic acid, sodium mandelate and its compounds with some bivalent transition metal ions
181
Thermal behaviour of mechanochemically synthesized nanocrystalline CuS
182
Thermal behaviour of medical grade silicone oils
183
Thermal behaviour of mixed alumina–silica gels obtained from alkoxides: Phase formation and morphology of powders
184
Thermal behaviour of mixed ligand Co(II), Ni(II) and Cu(II) complexes containing terephthalate ligands
185
Thermal behaviour of NaBH4-sodalites with alumosilicate framework: Influence of cage water content and the surrounding conditions
186
Thermal behaviour of nickel/metal hydride batteries during charge and discharge
187
Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: Experimental, modelling and parametric studies
188
Thermal behaviour of oil contaminated residues from metal cutting
189
Thermal behaviour of Pd40Cu30Ni10P20 bulk metallic glass Original Research Article
190
Thermal behaviour of phase-change slurries incorporating hydrated hydrophilic polymeric particles
191
Thermal behaviour of plasma-sprayed Mo coating on cast-iron substrate
192
Thermal behaviour of poly(acryloyloxybenzoic acid)/nylon 6 blends
193
Thermal behaviour of poly(methacrylic acid)/poly(N-vinyl-2-pyrrolidone) complexes
194
Thermal behaviour of polycrystalline [Ba(H2O)3](ClO4)2 and [Ba(NH3)4](ClO4)2
195
Thermal behaviour of polyoxocarbosilane shells in Fe-based (core)–polyoxocarbosilane (shell) nanocomposites
196
Thermal behaviour of pure and binary Fe(NO3)3·9H2O and (NH4)6Mo7O24·4H2O systems
197
Thermal behaviour of pyrope at 1000 and 1100 °C: mechanism of Fe2+ oxidation and decomposition model
198
Thermal behaviour of redeposited layer under high heat flux exposure
199
Thermal behaviour of rollers during the rolling process
200
Thermal behaviour of solar air heater with compound parabolic concentrator
201
Thermal behaviour of some rhodium(II) cycloalkanocarboxylate complexes
202
Thermal behaviour of some spiro benzodiazepine derivatives
203
Thermal behaviour of stirred yoghurt during cooling in plate heat exchangers Original Research Article
204
Thermal behaviour of succinic acid, sodium succinate and its compounds with some bivalent transition metal ions
205
Thermal behaviour of the consumable electrode in the vacuum arc remelting process
206
Thermal behaviour of the nitrated AFm phase Ca4Al2(OH)12(NO3)2 • 4H2O and structure determination of the intermediate hydrate Ca4Al2(OH)12(NO3)2 • 2H2O
207
Thermal behaviour of titanium seleno-telluride Ti5Ch8 in Ar and N2 atmospheres
208
Thermal behaviour of ultra-thin Co overlayers on rutile TiO2(1 0 0) surface
209
Thermal behaviour of unsaturated polyester resins + poly(3-octylthiophene) blends
210
Thermal behaviour of xenon in zirconium carbide at high temperature: Role of residual zirconia and free carbon
211
Thermal behaviour of zircon/zirconia-added chemically durable borosilicate porous glass
212
Thermal behaviour of α-hydroxyisobutyric acid, sodium α-hydroxyisobutyrate and its compounds with some bivalent transition metal ions
213
Thermal behaviour of β-anhydrite CaSO4 to 1,263 K
214
Thermal behaviour, phase transition and molecular motions in [Co(NH3)6](NO3)2
215
THERMAL BENDING ANALYSIS OF COMPOSITE LAMINATED CYLINDRICAL SHELLS USING A REFINED FIRST-ORDER THEORY
216
Thermal bending analysis of laminated orthotropic plates by the generalized differential quadrature method
217
Thermal benefits of city parks
218
Thermal biology in insect-parasite interactions
219
Thermal biology, population fluctuations and implications of temperature extremes for the management of two globally significant insect pests
220
Thermal bleaching of optical absorption and photoluminescence spectra of γ-irradiated CaF2:Dy:Pb:Na single crystals
221
Thermal blob convection in spherical shells
222
Thermal blob size as determined by the intrinsic viscosity
223
Thermal bonding of microfluidic devices: Factors that affect interfacial strength of similar and dissimilar cyclic olefin copolymers
224
Thermal Bonding of Polymeric Capillary Electrophoresis Microdevices in Water
225
Thermal bosonisation in the sine-Gordon and massive Thirring models Original Research Article
226
Thermal bottomonium suppression at RHIC and LHC
227
Thermal Boundary Condition Effects on Forced Convection Heat Transfer
228
Thermal Boundary Condition Effects on Forced Convection Heat Transfer
229
Thermal boundary conditions for thermal lattice Boltzmann simulations
230
Thermal boundary conditions of local thermal non-equilibrium model for convection heat transfer in porous media
231
Thermal boundary resistance at the graphene–graphene interface estimated by molecular dynamics simulations
232
Thermal boundary resistance of nanocomposites
233
Thermal box-barrier for a direct measurement in high temperature environment
234
Thermal breakage of window glass in room fires conditions – Analysis of some important parameters
235
Thermal breakdown in solid dielectrics: A new approach
236
Thermal breakdown of calcium carbonate and constraints on its use as a biomarker
237
Thermal breakthrough analysis for determination of energy equilibrium data in a fluidized bed
238
Thermal bremsstrahlung photons probing the nuclear caloric curve
239
Thermal bremsstrahlung probing the thermodynamical state of multifragmenting systems Original Research Article
240
Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics
241
Thermal buckling analysis of cross-ply laminated composite beams with general boundary conditions
242
Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties
243
Thermal buckling analysis of functionally graded rectangular nanoplates based on nonlocal third-order shear deformation theory
244
THERMAL BUCKLING ANALYSIS OF INHOMOGENEOUS RECTANGULAR PLATE DUE TO UNIFORM HEAT SUPPLY
245
Thermal buckling analysis of moderately thick functionally graded annular sector plates
246
Thermal Buckling Analysis of Porous Conical Shell on Elastic Foundation
247
Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory
248
Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models
249
Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams
250
Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams
251
Thermal buckling and postbuckling analysis of a laminated composite beam with embedded SMA actuators
252
Thermal buckling and postbuckling analysis of a laminated composite beam with embedded SMA actuators
253
Thermal buckling and postbuckling analysis of functionally graded annular plates with temperature-dependent material properties
254
Thermal buckling and postbuckling behavior of functionally graded carbon nanotube-reinforced composite plates
255
Thermal buckling and post-buckling of pinned–fixed Euler–Bernoulli beams on an elastic foundation
256
Thermal buckling and progressive ovalization of pipes: experiences at the TTS sodium test facility and their analysis Original Research Article
257
Thermal Buckling and Thermal Induced free Vibration Analysis of Perforated Composite Plates: a Mathematical Model
258
Thermal buckling and vibration behavior of multi-layer rectangular viscoelastic sandwich plates
259
Thermal buckling behavior of composite laminated plates
260
Thermal buckling behavior of cross-ply hybrid composite laminates with inclined crack
261
Thermal Buckling Behavior of Hybrid-Composite Angle-Ply Laminated Plates with an Inclined Crack
262
THERMAL BUCKLING FOR LOCAL DELAMINATION NEAR THE SURFACE OF LAMINATED CYLINDRICAL SHELLS AND DELAMINATED GROWTH
263
Thermal Buckling Graded Beams of Functionally
264
Thermal buckling load optimization of angle-ply laminated cylindrical shells
265
Thermal buckling load optimization of laminated composite plates
266
Thermal buckling load optimization of laminated skew plates
267
Thermal buckling of a simply supported moderately thick rectangular FGM plate
268
Thermal buckling of angle-ply laminated composite and sandwich plates according to a global higher-order deformation theory
269
Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher-order deformation theory
270
Thermal buckling of cross-ply laminated composite shallow shells according to a global higher-order deformation theory
271
Thermal buckling of FGM shells resting on a two-parameter elastic foundation
272
Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory
273
THERMAL BUCKLING OF FUNCTIONALLY GRADED CYLINDRICAL SHELL
274
Thermal buckling of functionally graded plates according to a 2D higher-order deformation theory
275
THERMAL BUCKLING OF FUNCTIONALLY GRADED PLATES BASED ON HIGHER ORDER THEORY
276
Thermal buckling of functionally graded plates using a local Kriging meshless method
277
Thermal buckling of functionally graded rectangular plates subjected to partial heating
278
Thermal buckling of functionally graded rectangular plates subjected to partial heating
279
Thermal buckling of functionally graded skew and trapezoidal plates with different boundary conditions using the element-free Galerkin method
280
Thermal buckling of hybrid angle-ply laminated composite plates with a hole
281
Thermal buckling of hybrid laminated composite plates with a hole
282
THERMAL BUCKLING OF IMPERFECT CYLINDRICAL SHELLS
283
Thermal Buckling of Imperfect Functionally Graded Cylindrical Shells Based on the Wan-Donnell Model
284
Thermal buckling of imperfect functionally graded plates
285
Thermal buckling of initially compressed single-walled carbon nanotubes by molecular dynamics simulation Original Research Article
286
Thermal buckling of laminated cross-ply oval cylindrical shells
287
Thermal Buckling of Multi-Walled Carbon Nanotubes Based on a Rigorous van der Waals Interaction
288
Thermal buckling of rectangular plates
289
Thermal buckling of shear deformable temperature dependent circular/annular FGM plates
290
Thermal buckling of shear-deformable composite laminated plates by the spline finite strip method Original Research Article
291
Thermal buckling of simply supported functionally graded skew plates
292
Thermal Buckling of Simply Supported Piezoelectric FGM Cylindrical Shells
293
Thermal buckling of various types of FGM sandwich plates
294
Thermal buckling optimization of composite laminates by evolution strategies
295
Thermal buckling predictions of three types of high-order theories for the heterogeneous orthotropic plates, using the new version of DQM
296
Thermal buckling response of all-edge clamped rectangular plates with symmetric angle-ply lamination
297
Thermal buckling response of shear flexible laminated anisotropic plates using a three-node isoparametric element
298
Thermal buffering effect of alpine boulder field microhabitats in Australia: Implications for habitat management and conservation
299
Thermal building behaviour in summer: long-term data evaluation using simplified models
300
Thermal building simulation and computer generation of nodal models
301
Thermal bump removal of a crystal monochromator by designing an optimal shape
302
Thermal bump removal of a crystal monochromator by designing an optimal shape
303
Thermal burn and electrical injuries among electric utility workers, 1995–2004
304
Thermal burn of the pharynx and larynx after swallowing hot milk
305
Thermal burns with injury to the intestine in a congenital hernia sac
306
Thermal calculation for high-pressure contact metamorphism: application to eclogite formation in the Sebadani area, the Sambagawa belt, SW Japan
307
Thermal calibrations of hypervelocity capture in aerogel using magnetic iron oxide particles
308
Thermal calorimetric detector for atomic hydrogen and deuterium beam measurements
309
Thermal calorimetric detector for atomic hydrogen and deuterium beam measurements
310
Thermal catalytic cracking of buriti oil (Mauritia flexuosa L.) over LaSBA-15 mesoporous materials
311
Thermal catalytic cracking of naphtha over multi wall carbon nanotube catalysts
312
Thermal catalytic cracking of naphtha over multi wall carbon nanotube catalysts
313
Thermal C-glycosylation of d-glucal with trimethylsilyl cyanide
314
Thermal challenge problem: Summary Original Research Article
315
Thermal change during formation process of indium-tin-oxide transparent conductive films
316
Thermal changes and cure depths associated with a high intensity light activation unit
317
Thermal changes in clay products from alluvial deposits of the Indo–Gangetic plains
318
Thermal Changes in Root Surface of Primary Teeth During Root Canal Treatment With Diode Lasers: An In Vitro Study
319
Thermal Changes of Root Surface of Anterior Primary Teeth in Pulpectomy with Er:YAG Laser
320
Thermal characterisation of a tungsten magnetoresistive heat switch Original Research Article
321
Thermal characterisation of ceramic/metal joining techniques for fusion applications using X-ray tomography
322
Thermal characterisation of corn–lentil extruded snacks
323
Thermal characterisation of embedded heat spreading layers in rectangular heat-generating electronic modules
324
Thermal characterisation of gelatin extracted from yellowfin tuna skin and commercial mammalian gelatin
325
Thermal characterisation of microalgae under slow pyrolysis conditions
326
Thermal characterisation of microalgae under slow pyrolysis conditions
327
Thermal Characterisation of Poly(Methyl Methacrylate) Filled with Barium Titanate as Denture Base Material
328
Thermal characterisation of red clay from the Northern Region of Rio de Janeiro State, Brazil using an open photoacoustic cell, in relation to structural changes on firing
329
Thermal characterisation of the products of wastewater sludge pyrolysis
330
Thermal characterisation of the products of wastewater sludge pyrolysis
331
Thermal characteristics and kinetics of crude oils and SARA fractions
332
Thermal characteristics during hydrogen fueling process of type IV cylinder
333
Thermal characteristics in a heat exchanger tube fitted with dual twisted tape elements in tandem
334
Thermal characteristics in a heat exchanger tube fitted with triple twisted tape inserts
335
Thermal characteristics in round tube fitted with serrated twisted tape
336
Thermal characteristics of a direct heat exchange system between granules with phase change material and air
337
Thermal characteristics of a double-glazed external wall system with roll screen in cooling season
338
Thermal characteristics of a eutectic mixture of myristic and palmitic acids as phase change material for heating applications
339
Thermal characteristics of a high heat flux micro-evaporator
340
Thermal characteristics of a meta-aramid and cellulose insulated transformer at loads beyond nameplate
341
Thermal characteristics of a personal environment module task air conditioning system: an experimental study
342
Thermal characteristics of a premixed impinging circular laminar-flame jet with induced swirl
343
Thermal characteristics of a resurfaced condenser and evaporator closed two-phase thermosyphon
344
Thermal characteristics of a solar tank with aerogel surface insulation
345
Thermal characteristics of Agaricus bisporus mushroom: freezing point, glass transition, and maximal-freeze-concentration condition
346
Thermal characteristics of Al2O3–MgO and Al2O3–spinel castables for steel ladles
347
Thermal characteristics of an N2O catalytic igniter with metal foam for hybrid rocket motors
348
Thermal characteristics of an underground cold-water reservoir: Analytical and experimental studies
349
Thermal characteristics of combined thermoelectric generator and refrigeration cycle
350
Thermal characteristics of composite sandwich structures for machine tool moving body applications
351
Thermal characteristics of conduction cooled 600 kJ HTS SMES system Original Research Article
352
Thermal characteristics of electroosmotic flow in a wavy-wall microtube
353
Thermal characteristics of fatty acid copper(II) carboxylate complexes with nicotinamide and diethylnicotinamide ligands
354
Thermal characteristics of flaxseed (Linum usitatissimum L.) proteins
355
Thermal characteristics of freeze-dried camel milk and its major components
356
Thermal characteristics of high voltage whole-solid-insulated polymeric ZnO surge arrester
357
Thermal characteristics of high-strength polymer–cement composites with lightweight aggregates and polypropylene fiber
358
Thermal characteristics of humic and hymatomelanic acids of lake sapropels of the ob river right and left banks
359
Thermal characteristics of inclined plate impinged by underexpanded sonic jet
360
Thermal characteristics of induction heating in cold crucible used for directional solidification
361
Thermal characteristics of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture as a phase change material for effective utilization of urban waste heat
362
Thermal characteristics of manganese (II) nitrate hexahydrate as a phase change material for cooling systems
363
Thermal characteristics of Ni–Fe–Ga–Mn and Ni–Fe–Ga–Co ferromagnetic shape memory alloys
364
Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes
365
Thermal characteristics of polyurethane foams incorporated with phase change materials
366
Thermal characteristics of porphyrin entrapped sol–gels during exposure to toxic gases
367
Thermal characteristics of quantum-cascade lasers by micro-probe optical spectroscopy
368
Thermal characteristics of shape-stabilized phase change material wallboard with periodical outside temperature waves
369
Thermal characteristics of solid–solid phase transitions in long-chain dialkyl ammonium salts
370
Thermal characteristics of the Main Himalaya Thrust and the Indian lower crust with implications for crustal rheology and partial melting in the Himalaya orogen
371
Thermal characteristics of turbulent rib-grooved channel flows
372
Thermal characteristics, chemical composition and polyphenol contents of date-pits powder Original Research Article
373
Thermal characteristics, Raman spectra and structural properties of new tellurite glasses within the Bi2O3–TiO2–TeO2 system
374
Thermal characterization and detailed kinetic analysis of Cassava starch thermo-oxidative degradation
375
Thermal characterization and kinetic analysis of non-isothermal decomposition process of Bauxite red mud. Estimation of density distribution function of the apparent activation energy
376
Thermal characterization and phase behavior of cornstarch studied by differential scanning calorimetry Original Research Article
377
Thermal characterization and physicochemical properties of Fe2O3–Mn2O3/Al2O3 system
378
Thermal characterization during dehydration of nitrifying and denitrifying microbiological mud encapsulated in silica gel
379
Thermal characterization in a circular tube fitted with inclined horseshoe baffles
380
Thermal characterization of a bridge-link carbon nanotubes array used as a thermal adhesive
381
Thermal characterization of a montmorillonite, modified with polyethylene-glycols (PEG1500 and PEG4000), by in situ HT-XRD and FT IR: Formation of a high-temperature phase
382
Thermal characterization of a Ni-based superalloy
383
Thermal characterization of a vinylidene fluoride-trifluorethylene (75–25) (%mol) copolymer film
384
Thermal Characterization of Agar Encapsulated in TiO2 Sol–Gel
385
Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes
386
Thermal characterization of an epoxy-based underfill material for flip chip packaging
387
Thermal characterization of chicken fat dry fractionation process Original Research Article
388
Thermal characterization of compact electronic systems: a portable PC as a study case
389
Thermal characterization of Cu60ZrxTi40−x metallic glasses (x=15, 20, 22, 25, 30)
390
Thermal characterization of CVD diamond film by photoacoustic method
391
Thermal Characterization of Eicosane/Graphite Nano-Composite-Based Phase Change Material
392
Thermal characterization of erythritol/expanded graphite composites for high thermal storage capacity
393
Thermal characterization of foam–cane (Quseab) as an insulant material
394
Thermal characterization of glasses prepared from simulated compositions of lunar soil JSC-1A
395
Thermal characterization of liquids and pastes using the flash technique
396
Thermal characterization of magnetically aligned carbonyl iron/agar composites
397
Thermal characterization of materials at high pressures
398
Thermal characterization of methylene blue intercalated montmorillonites by photoacoustic technique
399
Thermal characterization of mustard straw and stalk in nitrogen at different heating rates
400
Thermal characterization of new fire-insulating materials from industrial inorganic TiO2 wastes
401
Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage
402
Thermal characterization of oil extracted from ethylene–propylene–diene terpolymer residues (EPDM-r)
403
Thermal characterization of organically modified montmorillonite
404
Thermal characterization of overmolded underfill materials for stacked chip scale packages
405
Thermal characterization of piezoelectric and non-piezoelectric Lead Meta-Niobate
406
Thermal characterization of PMR polyimides
407
Thermal characterization of polymer matrix composites containing microencapsulated paraffin in solid or liquid state
408
Thermal characterization of porous carbon foam—convection in parallel flow
409
Thermal characterization of porous graphitic foam – Convection in impinging flow
410
Thermal Characterization of Power Devices by Scanning Thermal Microscopy Techniques
411
Thermal Characterization of Power Devices by Scanning Thermal Microscopy Techniques
412
Thermal characterization of screen printed conductive pastes for RFID antennas
413
Thermal characterization of Se100−xSnx (x = 4, 6 and 8) chalcogenide glasses using differential scanning calorimeter
414
Thermal characterization of shrouded plate fin array on an LED backlight panel
415
Thermal characterization of softwood lignin modification by termite Coptotermes formosanus (Shiraki)
416
Thermal characterization of some new xanthine derivatives
417
Thermal characterization of the antiviral drug UC-781 and stability of its glass
418
Thermal characterization of the quercetin and rutin flavonoids
419
Thermal characterization of thermally conductive underfill for a flip-chip package using novel temperature sensing technique
420
Thermal characterization of titania-modified alumina-supported palladium and catalytic properties for methane combustion
421
Thermal characterization of titanium hydride in thermal oxidation process
422
Thermal characterization of Titanʹs tholins by simultaneous TG–MS, DTA, DSC analysis
423
Thermal characterization of tropical biomass feedstocks
424
Thermal characterization of turbulent flow in a channel with isosceles triangular ribs
425
Thermal characterization of Ugandaʹs Acacia hockii, Combretum molle, Eucalyptus grandis and Terminalia glaucescens for gasification
426
Thermal characterization, combustion and kinetics of different origin crude oils
427
Thermal characterization, melting behaviors, dynamic mechanical properties, and morphology in the polymorphism of syndiotactic polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)
428
Thermal charging of metal nanoparticles
429
Thermal chemical synthesis of nanostructured chromium carbide cermets
430
Thermal chemical synthesis of nanostructured chromium carbide cermets
431
Thermal chemical vapor deposition (T-CVD) growth of carbon nanotubes on different metallic underlayers
432
Thermal chemical vapor deposition grown graphene heat spreader for thermal management of hot spots Original Research Article
433
Thermal chemical vapor deposition of fluorocarbon polymer thin films in a hot filament reactor
434
Thermal chemiluminescence from γ-irradiated polytetrafluoroethylene and its emission mechanism: Investigation by multichannel Fourier-transform luminescence spectroscopy
435
Thermal chemiluminescence from γ-irradiated polytetrafluoroethylene and its emission mechanism: Kinetic analysis and bond dissociation energy of fluoroperoxide group
436
Thermal chemiluminescence spectroscopy of amino acids and its salts using a multichannel Fourier-transform spectrometer
437
Thermal chemistry of diiodomethane on Ni(1 1 0) surfaces I. Clean and hydrogen-covered
438
Thermal chemistry of diiodomethane on Ni(1 1 0) surfaces II. Effect of coadsorbed oxygen
439
Thermal chemistry of toluene and benzene on Si(1 0 0)2×1 and modified surfaces
440
Thermal chlorofluorination of propyne and propadiene
441
Thermal chlorofluorination of propyne and propadiene II
442
Thermal cis–trans conversion in thiophene oligomers
443
Thermal cis–trans isomerization of triazo-benzene
444
Thermal cis–trans isomerization of triazo-benzene
445
Thermal coating erosion in a simulated Martian landing environment
446
Thermal co-decomposition of silver acetylacetonate and tin(II) hexafluoroacetylacetonate: Formation of carbonaceous Ag/AgxSn(x = 4 and 6.7)/SnO2 composites
447
Thermal coefficient of InP-based quantum dot laser from cavity-mode measurements
448
Thermal collapse of SAPO-34 molecular sieve towards a perfect glass
449
Thermal collapse of snowflake fractals
450
Thermal combustion theory for a two-center unbranched chain reaction under the influence of light or ionizing radiation
451
Thermal comfort analysis of a low temperature waste energy recovery system: SIECHP
452
Thermal comfort and building design in the tropical climates
453
Thermal comfort and building energy consumption implications – A review
454
Thermal comfort and clothing insulation of resting tent occupants at high altitude
455
Thermal Comfort and Energy Analysis in Ceramic Tile
456
Thermal comfort and energy consumption in a UK educational building
457
Thermal comfort and energy consumption in modern versus traditional buildings in Cameroon: A questionnaire-based statistical study
458
Thermal comfort and energy consumption of the radiant ceiling panel system.: Comparison with the conventional all-air system
459
Thermal comfort and energy performance of a low-mixing ceiling-mounted personalized ventilator system
460
Thermal comfort and energy saving in a vehicle compartment using a localized air-conditioning system
461
Thermal comfort and energy saving of a personalized PFCU air-conditioning system
462
Thermal comfort and IAQ assessment of under-floor air distribution system integrated with personalized ventilation in hot and humid climate
463
Thermal comfort and IAQ characteristics of naturally/mechanically ventilated and air-conditioned bedrooms in a hot and humid climate
464
Thermal comfort and indoor air quality in the lecture room with 4-way cassette air-conditioner and mixing ventilation system
465
Thermal comfort and occupant responses during summer in a low to middle income housing development in South Australia
466
Thermal comfort and productivity - Evaluation of workplace environment in a task conditioned office
467
Thermal comfort and psychological adaptation as a guide for designing urban spaces
468
Thermal comfort and the integrated design of homes for older people with dementia
469
Thermal comfort and use of thermostats in Finnish homes and offices
470
Thermal comfort and workplace occupant satisfaction—Results of field studies in German low energy office buildings
471
Thermal comfort assessment and application of radiant cooling: A case study
472
Thermal Comfort Assessment and Heat-Related Illnesses among Sellers in Periodic Local Markets: A Case Study in Hot and Dry Climate of Iran
473
Thermal Comfort Assessment and Optimization of Environmental Factors by Using Taguchi Method
474
Thermal comfort assessment in civil aircraft cabins
475
Thermal comfort assessment in semi-outdoor environments: Application to comfort study in stadia
476
Thermal Comfort Assessment: A Case Study at Malaysian Automotive Industry
477
THERMAL COMFORT AT THE TURBINE ROOM IN THE POWER STATION: A REVIEW
478
Thermal comfort conditions of shaded outdoor spaces in hot and humid climate of Malaysia
479
Thermal comfort control on multi-room fan coil unit system using LEE-based fuzzy logic
480
Thermal comfort design of traditional houses in hot dry region of Algeria
481
Thermal comfort enhancement by using a ceiling fan
482
Thermal comfort evaluation in kindergarten: PMV and PPD measurement through datalogger and questionnaire
483
Thermal comfort evaluation of naturally ventilated public housing in Singapore
484
Thermal comfort evaluation with virtual manikin methods
485
Thermal Comfort Features of Antalya, Future Projections Using Climate Model Data and Its Effects on Tourism
486
Thermal comfort field study in undergraduate laboratories – An analysis of occupant perceptions
487
Thermal comfort for free-running buildings
488
Thermal comfort for naturally ventilated houses in Indonesia
489
Thermal comfort implications of urbanization in a warm-humid city: the Colombo Metropolitan Region (CMR), Sri Lanka
490
Thermal comfort in a room with exposed roof using evaporative cooling in Delhi
491
Thermal comfort in air-conditioned mosques in the dry desert climate
492
Thermal comfort in buildings with split air-conditioners in hot-humid area of China
493
Thermal comfort in chilled ceiling and displacement ventilation environments: vertical radiant temperature asymmetry effects
494
Thermal comfort in classrooms in the tropics
495
Thermal comfort in forested urban canyons of low building density. An assessment for the city of Mendoza, Argentina
496
Thermal comfort in hospitals – A literature review
497
Thermal comfort in Italian classrooms under free running conditions during mid seasons: Assessment through objective and subjective approaches
498
Thermal comfort in naturally ventilated apartments in summer: Findings from a field study in Hyderabad, India
499
Thermal comfort in naturally ventilated buildings in hot-humid area of China
500
Thermal comfort in naturally ventilated buildings: revisions to ASHRAE Standard 55
501
Thermal Comfort in Naturally Ventilated Classroom: A Literature Review
502
Thermal comfort in office buildings: Two case studies commented
503
Thermal comfort in offices in summer: Findings from a field study under the ‘setsuden’ conditions in Tokyo, Japan
504
Thermal comfort in open plan offices in northern Italy: An adaptive approach
505
Thermal comfort in outdoor urban spaces in Singapore
506
Thermal comfort in outdoor urban spaces: Analysis across different European countries
507
Thermal comfort in passive solar earth integrated rooms
508
Thermal comfort in residential buildings – Failure to predict by Standard model
509
Thermal comfort in residential buildings: Comfort values and scales for building energy simulation
510
Thermal comfort in sub-Saharan Africa: Field study report in Jos-Nigeria
511
Thermal comfort in sub-Saharan Africa: Field study report in Jos-Nigeria
512
Thermal comfort in transitional spaces—basic concepts: literature review and trial measurement
513
Thermal comfort in undergraduate laboratories — A field study in Kharagpur, India
514
Thermal comfort in urban spaces: impact of vegetation growth: Case study: Piazza della Scienza, Milan, Italy
515
Thermal comfort in urban transitional spaces
516
Thermal Comfort Investigation in Traditional and Modern Urban Canyons in Bandar Abbas, Iran
517
Thermal comfort models: A review and numerical investigation
518
Thermal comfort of aeroplane seats: influence of different seat materials and the use of laboratory test methods
519
Thermal comfort of house and it’s influence on people’s quality of life
520
Thermal comfort of patients: Objective and subjective measurements in patient rooms of a Belgian healthcare facility
521
Thermal comfort prediction for a new passive cooling system
522
THERMAL COMFORT PROPERTIES OF COTTON KNITTED FABRICS IN DRY AND WET STATES
523
Thermal comfort standards for air conditioned buildings in hot and humid Thailand considering additional factors of acclimatization and education level
524
Thermal comfort standards, measured internal temperatures and thermal resilience to climate change of free-running buildings: A case-study of hospital wards
525
Thermal Comfort Study Based on PMV-PPD in the Building of a Screening Center for COVID-19
526
Thermal comfort study of an air-conditioned lecture theatre in the tropics
527
Thermal comfort temperature range for factory workers in warm humid tropical climates
528
Thermal comfort temperatures world-wide - the current position
529
Thermal comfort, skin temperature distribution, and sensible heat loss distribution in the sitting posture in various asymmetric radiant fields
530
Thermal comfort: A review paper
531
Thermal comfort: use of controls in naturally ventilated buildings
532
Thermal Comfort-Based Heat Pumps Utilization for Wind Power Uncertainty Management
533
Thermal compact modeling of parallel plate heat sinks
534
Thermal compact models: an alternative approach
535
Thermal Compatibility and Bond Strength of FRP Reinforcement in Prestressed Concrete Applications
536
Thermal Compatibility and Durability of Wearing Surfaces on GFRP Bridge Decks
537
Thermal compatibility of centrifugally atomized U–Mo powders with aluminium in a dispersion fuel Original Research Article
538
Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries
539
Thermal compatibility of dry sliding tribo-specimens
540
Thermal component of stimulated brillouin scattering due to two-photon absorption
541
Thermal components in the early X-ray afterglow of GRBs
542
Thermal composting of faecal matter as treatment and possible disinfection method––laboratory-scale and pilot-scale studies
543
Thermal compression and characterization of three-dimensional nonwoven PET matrices as tissue engineering scaffolds
544
Thermal Condensation of 1-Aryl/ hetaryl-3-methyl-2- pyrazolin-5-ones with Aromatic Aldehydes. synthesis of 4- arylidenepyrazolones
545
Thermal condensation of trinuclear lanthanide butoxides. Molecular structure of La5(μ5-O)(μ3-OtBu)4(μ-OtBu)4(OtBu)5
546
Thermal conditioning for urban outdoor spaces through the use of evaporative wind towers
547
Thermal Conduct ivity and Thermal Diffusivity of Biodiesel and Bioethanol Samples
548
Thermal conductance at millikelvin temperatures of woven ribbon cable with phosphor-bronze clad superconducting wires Original Research Article
549
Thermal conductance in a quantum waveguide modulated with quantum dots
550
Thermal conductance in quantum wire with two obstacles
551
Thermal conductance measurement of windows: An innovative radiative method
552
Thermal conductance measurement on vacuum glazing
553
Thermal conductance measurements of bolted copper to copper joints at sub-Kelvin temperatures Original Research Article
554
Thermal conductance of randomly oriented composites of thin layers
555
Thermal conductance of the interfaces between the III-nitride materials and their substrates: Effects of intrinsic material properties and interface conditions
556
Thermal conductance through discrete quantum channels
557
Thermal conduction analysis and characterization of solder bumps in flip chip package
558
Thermal conduction analysis of layered functionally graded materials
559
Thermal conduction and thermal diffusion in dilute polyatomic gas mixtures
560
Thermal conduction between a heated microcantilever and a surrounding air environment
561
Thermal conduction in a 2-D FCT plasma hydrodynamic code Original Research Article
562
Thermal conduction in classical low-dimensional lattices
563
Thermal conduction in classical low-dimensional lattices
564
Thermal conduction induced by electron-beam
565
Thermal conduction measurement of miniature coaxial cables between 0.3 and 4.5 K for the wiring of superconducting detectors Original Research Article
566
Thermal conduction model of metal and ceramics
567
Thermal conduction of a circular inclusion with variable interface parameter
568
Thermal conductive heating in fractured bedrock: Screening calculations to assess the effect of groundwater influx
569
Thermal conductive properties of Ni–P electroless plated SiCp/Al composite electronic packaging material
570
Thermal Conductivities of [bmim][PF6], [hmim][PF6], and [omim][PF6] from 294 to 335 K at Pressures up to 20 MPa
571
Thermal conductivities of actinides (U, Pu, Np, Cm, Am) and uranium-alloys (U–Zr, U–Pu–Zr and U–Pu–TRU–Zr)
572
Thermal conductivities of americium dioxide and sesquioxide by molecular dynamics simulations
573
Thermal conductivities of hypoeutectic Al-Cu alloys during solidification and cooling
574
Thermal conductivities of hypoeutectic Al-Cu alloys during solidification and cooling
575
Thermal conductivities of hypostoichiometric (U, Pu, Am)O2−x oxide
576
Thermal conductivities of irradiated UO2 and (U, Gd)O2 pellets
577
Thermal conductivities of irradiated UO2 and (U,Gd)O2
578
Thermal conductivities of iso-volume centre-symmetric honeycombs
579
Thermal conductivities of solid and liquid phases for neopentylglycol, aminomethylpropanediol and their binary alloy Original Research Article
580
Thermal conductivities of solid and liquid phases for pure Al, pure Sn and their binary alloys
581
Thermal conductivities of solid and liquid phases in Pb–Cd and Sn–Zn binary eutectic alloys
582
Thermal conductivities of ThO2, NpO2 and their related oxides: Molecular dynamics study
583
Thermal conductivities of three-dimensionally woven fabric composites
584
Thermal conductivities of YSZ/Al2O3 composites
585
Thermal conductivities of yttria-stabilized zirconia films measured by a laser-heating AC method
586
Thermal conductivities study of new types of compound adsorbents used in solar adsorption refrigeration
587
Thermal conductivities study on silica aerogel and its composite insulation materials
588
Thermal conductivity analysis of a briquette with additive hazelnut shells
589
Thermal conductivity and acid dissolution behavior of MgO–ZrO2 ceramics for use in LWR inert matrix fuel
590
THERMAL CONDUCTIVITY AND ACOUSTIC PROPERTIES OF NATURAL FIBER MIXED POLYURETHANE COMPOSITES
591
Thermal Conductivity and Anisotropy of Intermolecular Potential Energy in Refrigerant Fluids R125, R134a, R12, R14 and R141b
592
Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures
593
Thermal conductivity and compressive strength of expanded perlite aggregate concrete with mineral admixtures
594
Thermal conductivity and critical modes in one-dimensional Fibonacci quasicrystals
595
Thermal conductivity and critical modes in one-dimensional Fibonacci quasicrystals
596
Thermal conductivity and cycle characteristic of metal hydride sheet formed using aramid pulp and carbon fiber
597
Thermal conductivity and density of clay pastes at various water contents for pelotherapy use
598
Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride
599
Thermal conductivity and dielectric constant of spark plasma sintered aluminum nitride
600
Thermal conductivity and dielectric property of hot-pressing sintered AlN–BN ceramic composites
601
Thermal conductivity and fire resistance of epoxy molding compounds filled with Si3N4 and Al(OH)3
602
Thermal conductivity and interfacial energies of solid Sn in the Sn–Cu alloy
603
Thermal conductivity and interfacial energies of solid Sn solution in the Sn–Ag–In ternary alloy
604
Thermal conductivity and interfacial energies of solid Sn3Sb2 in the Sn–Sb peritectic system
605
Thermal conductivity and interfacial energy of solid Bi solution in the Bi–Al–Zn eutectic system
606
Thermal conductivity and Kapitza resistance of epoxy resin fiberglass tape at superfluid helium temperature Original Research Article
607
Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material
608
Thermal conductivity and latent heat thermal energy storage properties of LDPE/wax as a shape-stabilized composite phase change material
609
Thermal conductivity and limiting oxygen index of basic rubber blend/aluminium hydroxide particulate composite
610
Thermal conductivity and limiting oxygen index of basic rubber blend/aluminium hydroxide particulate composite
611
Thermal conductivity and Lorenz number of the Ce1−xLaxNiAl4 Kondo alloys
612
Thermal conductivity and magnetic properties of the B substituted Ca3Co4O9
613
Thermal conductivity and microstructure of Ti-doped graphite Original Research Article
614
Thermal conductivity and permeability of consolidated expanded natural graphite treated with sulphuric acid Original Research Article
615
Thermal conductivity and phase stability of plasma sprayed ZrO2–Y2O3–La2O3 coatings
616
Thermal conductivity and phase-change properties of aqueous alumina nanofluid
617
THERMAL CONDUCTIVITY AND RESISTANCE OF NOMEX FABRICS EXPOSED TO SALTY WATER
618
Thermal conductivity and rheological properties of graphite/oil nanofluids
619
Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes
620
Thermal conductivity and specific heat of bulk amorphous chalcogenides Ge20Te80−xSex (x = 0,1,2,8)
621
Thermal conductivity and specific heat of kaolinite: Evolution with thermal treatment
622
Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites Original Research Article
623
Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell
624
Thermal conductivity and tensile response of defective graphene: A molecular dynamics study Original Research Article
625
Thermal conductivity and the isotope effect in Li2O
626
Thermal conductivity and thermal contact conductance studies on Al2O3/Al–AlN metal matrix composite
627
Thermal conductivity and thermal cycle life of La2O3 and HfO2 doped ZrO2–Y2O3 coatings produced by EB-PVD
628
Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres
629
Thermal conductivity and thermal diffusivity of cores from a 26 meter deep borehole drilled in Livingston Island, Maritime Antarctic
630
Thermal Conductivity and Thermal Diffusivity of Pulse-Heated W–Re Alloys
631
Thermal conductivity and thermal expansion coefficient of diamond/5 wt%Si–Cu composite by vacuum hot pressing
632
Thermal conductivity and thermal expansion of Ir3X (X = Ti, Zr, Hf, V, Nb, Ta) compounds for high-temperature applications
633
Thermal conductivity and thermodynamics of majoritic garnets: implications for the transition zone
634
Thermal conductivity and thermo-power of ( and ) bulk superconductors
635
Thermal Conductivity and Viscoelastic Properties of UV-curable Urethane Acrylate Reinforced with Modified Al2O3 Nanoparticles
636
Thermal Conductivity and Viscosity of Aqueous K2SO4 Solutions at Temperatures from 298 to 575 K and at Pressures up to 30 MPa
637
Thermal conductivity and viscosity of water-in-oil nanoemulsions
638
Thermal conductivity anisotropy in polypropylene foams prepared by supercritical CO2 dissolution
639
Thermal conductivity as an indicator of fat content in milk
640
Thermal conductivity bounds for isotropic, porous materials
641
Thermal conductivity calculation of magnetite using molecular dynamics simulation
642
Thermal Conductivity Characterization of Bamboo Fiber Reinforced Polyester Composite
643
Thermal conductivity correlations for minor constituent fluids in natural gas: n-octane, n-nonane and n-decane
644
Thermal conductivity decomposition and analysis using molecular dynamics simulations. Part I. Lennard-Jones argon
645
Thermal conductivity decomposition and analysis using molecular dynamics simulations: Part II. Complex silica structures
646
Thermal conductivity degradation of ceramic materials due to low temperature, low dose neutron irradiation
647
Thermal conductivity determinations of thermal barrier coatings
648
Thermal conductivity determinations of thermal barrier coatings
649
Thermal conductivity due to magnons in high-quality single crystals of the two-leg spin-ladder system (Ca,Sr,La)14Cu24O41
650
Thermal conductivity effects on steady state propagation speed during self-propagating high-temperature synthesis of Ti + C green compacts
651
Thermal conductivity enhancement dependent pH and chemical surfactant for Cu-H2O nanofluids
652
Thermal conductivity enhancement in a latent heat storage system
653
Thermal Conductivity Enhancement in Aqueous Suspensions of Carbon Multi-Walled and Double-Walled Nanotubes in the Presence of Two Different Dispersants
654
Thermal conductivity enhancement of Al2O3 nanofluids based on the mixtures of aqueous NaCl solution and CH3OH
655
Thermal conductivity enhancement of binary nanoemulsion (O/S) for absorption application
656
Thermal conductivity enhancement of BN/silicone composites cured under electric field: Stacking of shape, thermal conductivity, and particle packing structure anisotropies
657
Thermal conductivity enhancement of carbon fiber composites
658
Thermal conductivity enhancement of energy storage media using carbon fibers
659
Thermal conductivity enhancement of erythritol as PCM by using graphite and nickel particles
660
Thermal conductivity enhancement of nanofluids in conjunction with electrical double layer (EDL)
661
Thermal conductivity enhancement of nanostructure-based colloidal suspensions utilized as phase change materials for thermal energy storage: A review
662
Thermal conductivity enhancement of paraffins by increasing the alignment of molecules through adding CNT/graphene
663
Thermal conductivity enhancement of PEG/SiO2 composite PCM by in situ Cu doping
664
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
665
Thermal conductivity enhancement of phase change materials using a graphite matrix
666
Thermal conductivity enhancement of ZnO nanofluid using a one-step physical method
667
Thermal conductivity enhancement with different fillers for epoxy resin adhesives
668
Thermal conductivity equations for pure fluids in a heuristic extended corresponding states framework: I. Modeling techniques
669
Thermal conductivity equations for pure fluids in a heuristic extended corresponding states framework: II. Application to two fluids
670
Thermal conductivity estimation in non-linear problems
671
Thermal conductivity evaluation of GaN–AlN–(4H)SiC hetero-epitaxial material system
672
Thermal conductivity evaluation of high burnup mixed-oxide (MOX) fuel pellet
673
Thermal conductivity features of ZnO-based varistors using the laser-pulse method
674
Thermal conductivity features of ZnO-based varistors using the laser-pulse method
675
Thermal conductivity for single-walled carbon nanotubes from Einstein relation in molecular dynamics Original Research Article
676
Thermal conductivity from dynamic response of DSC
677
Thermal conductivity improvement of phase change materials/graphite foam composites Original Research Article
678
Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications
679
Thermal conductivity in dynamics of first-order phase transitions
680
Thermal conductivity in mullite/ZrO2 composite coatings
681
Thermal conductivity in relation to porosity and hardness of terrestrial porous media
682
Thermal conductivity in vortex state of nodal superconductors
683
Thermal conductivity investigation for upsetting with a procedure of combining inverse model and the proposed regularization of Tikhonov method
684
Thermal conductivity investigation of zirconia co-doped with yttria and niobia EB-PVD TBCs
685
Thermal conductivity mapping of pyrolytic carbon and silicon carbide coatings on simulated fuel particles by time-domain thermoreflectance
686
Thermal conductivity measurement and characterization of binary nanofluids
687
Thermal conductivity measurement and sedimentation detection of aluminum oxide nanofluids by using the 3ω method
688
Thermal conductivity measurement below 40 K of the CFRP tubes for the Mid-Infrared Instrument mounting struts
689
Thermal conductivity measurement of a PCM based storage system containing carbon fibers
690
Thermal conductivity measurement of anisotropic material using photothermal deflection method
691
Thermal conductivity measurement of geothermal cementing systems: an experimental comparison between the line source and Jaeger methods
692
Thermal conductivity measurement of HTS tapes and stacks for current lead applications
693
Thermal conductivity measurement of insulating materials with a three layers device
694
Thermal conductivity measurement of liquid materials by a hot-disk method in short-duration microgravity environments
695
Thermal conductivity measurement of liquid materials by a hot-disk method in short-duration microgravity environments
696
Thermal conductivity measurement of methanol-based nanofluids with Al2O3 and SiO2 nanoparticles
697
Thermal conductivity measurement of oil in Water (O/W) nanoemulsion and oil in H2O/LiBr (O/S) binary nanoemulsion for absorption application
698
Thermal Conductivity Measurement of Semitransparent Solids by Hot-Wire Technique1
699
Thermal Conductivity Measurement of Submicron-Thick Films Deposited on Substrates by Modified ac Calorimetry (Laser-Heating Ångstrom Method)
700
Thermal Conductivity Measurement of Thermally-Oxidized SiO2 Films on a Silicon Wafer Using a Thermo-Reflectance Technique
701
Thermal conductivity measurements of a traditional fermented dough in the frozen state Original Research Article
702
Thermal conductivity measurements of alumina powders and molded Min-K in vacuum
703
Thermal Conductivity Measurements of Aqueous SrCl2 and Sr(NO3)2 Solutions in the Temperature Range Between 293 and 473 K at Pressures up to 100 MPa
704
Thermal conductivity measurements of copper-coated metal hydrides (LaNi5, Ca0.6Mm0.4Ni5, and LaNi4.75Al0.25) for use in metal hydride hydrogen compression systems
705
Thermal Conductivity Measurements of Liquid Mercury and Gallium by a Transient Hot-Wire Method in a Static Magnetic Field
706
Thermal conductivity measurements of pitch-bonded graphites at millikelvin temperatures: Finding a replacement for AGOT graphite Original Research Article
707
Thermal conductivity measurements of porous dust aggregates: I. Technique, model and first results
708
Thermal Conductivity Measurements of Thin Amorphous Silicon Films by Scanning Thermal Microscopy
709
Thermal Conductivity Measurements of Thin Insulating Layers Deposited on High-Conducting Sheets
710
Thermal Conductivity Modeling of Pure Refrigerants in a Three-Parameter Corresponding States Format
711
Thermal Conductivity Modeling of Refrigerant Mixtures in a Three-Parameter Corresponding States Format
712
Thermal conductivity modelling of terrestrial soil media—A comparative study
713
Thermal Conductivity Models for Polymer Stabilized Hybrid Nanofluids Prepared by One-Step Method
714
Thermal conductivity of (Hf1−xZrx)6Ta2O17 (x = 0, 0.1, 0.3 and 0.5) ceramics
715
Thermal conductivity of (Sm1–xLax)2Zr2O7 (x=0, 0.25, 0.5, 0.75 and 1) oxides for advanced thermal barrier coatings
716
Thermal conductivity of (U,Ce)O2 with and without Nd or Zr
717
Thermal conductivity of (U,Pu,Np)O2 solid solutions
718
Thermal Conductivity of 1,1-Difluoroethane (HFC-152a)
719
Thermal conductivity of 2D C–C composites with pyrolytic and glass-like carbon matrices
720
Thermal conductivity of a beryllium gas packed bed
721
Thermal conductivity of a clay-based aerogel
722
Thermal conductivity of a CuCrZr alloy from 5 K to room temperatures Original Research Article
723
Thermal conductivity of a graphene oxide–carbon nanotube hybrid/epoxy composite Original Research Article
724
Thermal conductivity of a metal-organic framework (MOF-5): Part II. Measurement
725
Thermal conductivity of a single carbon nanocoil measured by field-emission induced thermal radiation Original Research Article
726
Thermal conductivity of a volcanic rock material (olivine-melilitite) in the temperature range between 288 and 1470 K
727
Thermal conductivity of Al2O3/SiC platelet composites
728
Thermal Conductivity of AlN and SiC Thin Films
729
Thermal conductivity of AlN ceramics sintered with CaF2 and YF3
730
Thermal conductivity of AlN/polystyrene interpenetrating networks
731
Thermal Conductivity of Aloji Fireclay as Refractory Material
732
Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution
733
Thermal conductivity of alumina inclusion/glass matrix composite materials: local and macroscopic scales
734
Thermal conductivity of ammonia borane complex and its composites with aluminum powder
735
Thermal conductivity of ammonia + lithium nitrate and ammonia + lithium nitrate + water solutions over a wide range of concentrations and temperatures
736
Thermal conductivity of ammonia + water mixtures over a wide range of concentrations
737
Thermal conductivity of AmO2−x
738
Thermal conductivity of amorphous silicon thin films
739
Thermal conductivity of amorphous Teflon (AF 1600) at high pressure
740
Thermal conductivity of an aligned carbon nanotube array Original Research Article
741
Thermal conductivity of anodized aluminum oxide layer: The effect of electrolyte and temperature
742
Thermal conductivity of aqueous BaI2 solutions in the temperature range 293–473 K and the pressure range 0.1–100 MPa
743
Thermal Conductivity of Aqueous Potassium Chloride Solutions
744
Thermal Conductivity of Aqueous Sugar Solutions under High Pressure
745
Thermal conductivity of archaeological ceramics: The effect of inclusions, porosity and firing temperature
746
Thermal conductivity of A-site doped pyrochlore oxides studied by molecular-dynamics simulation
747
Thermal conductivity of BaPuO3 at temperatures from 300 to 1500 K
748
Thermal conductivity of BaWO4 single crystal
749
Thermal Conductivity of Binary Refrigerant Mixtures of HFC-32/125 and HFC-32/134a in the Liquid Phase
750
Thermal conductivity of boron nitride reinforced polyethylene composites
751
Thermal Conductivity of Carbon Aerogels as a Function of Pyrolysis Temperature
752
Thermal Conductivity of Carbon Dioxide–Methane Mixtures at Temperatures Between 300 and 425 K and at Pressures up to 12 MPa
753
Thermal conductivity of carbon nanofiber mats Original Research Article
754
Thermal conductivity of carbon nanotube reinforced aluminum composites: A multi-scale study using object oriented finite element method
755
Thermal conductivity of carbon-containing refractories
756
Thermal conductivity of carbon-phenolic 8-harness satin weave composites
757
Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling
758
Thermal conductivity of CeNiAl4 Kondo lattice
759
Thermal conductivity of ceramic particle filled polymer composites and theoretical predictions
760
Thermal conductivity of ceramics during irradiation
761
Thermal Conductivity of Chalcogenide As2S3 Thin Films
762
Thermal Conductivity of Clay Bricks
763
Thermal conductivity of coal ash and slags and models used
764
Thermal conductivity of coconut fibre filled ferrocement sandwich panels
765
Thermal conductivity of combustion synthesized β-sialons
766
Thermal conductivity of composite sorbents “salt in porous matrix” for heat storage and transformation
767
Thermal conductivity of composites made of wastes of wood and expanded polystyrene
768
Thermal conductivity of compressed beryllium pebble beds
769
Thermal conductivity of compressed ceramic breeder pebble beds
770
Thermal Conductivity of Cu 2 O-TiO 2 Composite -Nanofluid Based on Maxwell model
771
Thermal Conductivity of Cu and Al-Water Nanofluids
772
Thermal conductivity of diatomic liquid in a narrow channel including a nanobubble
773
Thermal conductivity of EB-PVD thermal barrier coatings evaluated by a steady-state laser heat flux technique
774
Thermal conductivity of electron-doped CaMnO3 perovskites: Local lattice distortions and optical phonon thermal excitation Original Research Article
775
Thermal conductivity of ethyl fluoride (HFC161)
776
Thermal conductivity of ethylene glycol and water mixture based Fe3O4 nanofluid
777
Thermal conductivity of ethylene vinyl acetate copolymer/nanofiller blends
778
Thermal conductivity of exfoliated graphite nanoplatelet paper Original Research Article
779
Thermal Conductivity of Feed Pellets
780
Thermal conductivity of fibrous glass board by guarded hot plates and heat flow meters: An iInternational round-robin
781
Thermal conductivity of fired clays: Effects of mineralogical and physical properties of the raw materials
782
Thermal conductivity of fluorinated graphene: A non-equilibrium molecular dynamics study
783
Thermal conductivity of fused quartz and quartz ceramic at high temperatures and high pressures Original Research Article
784
Thermal conductivity of GaN crystals in 4.2–300 K range
785
Thermal conductivity of granular materials relevant to the thermal evolution of cometary nuclei
786
Thermal conductivity of graphite filled liquid crystal polymer composites and theoretical predictions
787
Thermal conductivity of graphite/silicone rubber prepared by solution intercalation
788
Thermal conductivity of hemp concretes: Variation with formulation, density and water content
789
Thermal conductivity of heterogeneous LWR MOX fuels
790
Thermal Conductivity of HFC-32, HFC-125, and HFC-134a in the Solid Phase
791
Thermal conductivity of high porosity alumina refractory bricks made by a slurry gelation and foaming method
792
Thermal conductivity of highly crystallized polyethylene
793
Thermal conductivity of highly loaded aluminium nitride–poly(propylene glycol) dispersions
794
Thermal conductivity of highly porous mullite material
795
Thermal conductivity of highly porous mullite material Original Research Article
796
Thermal conductivity of highly porous mullite materials
797
Thermal conductivity of highly porous zirconia
798
Thermal conductivity of high-temperature Si–B–C–N thin films
799
Thermal conductivity of homogeneous and heterogeneous MOX fuel with up to 44 MWd/kgHM burn-up
800
Thermal conductivity of hydrogenated amorphous silicon
801
Thermal conductivity of InAs quantum dot stacks using AlAs strain compensating layers on InP substrate
802
Thermal conductivity of individual carbon nanofibers Original Research Article
803
Thermal conductivity of isotopically enriched 28Si: revisited
804
Thermal conductivity of isotopically enriched silicon
805
Thermal conductivity of Kevlar 49 between 7 and 290 K
806
Thermal conductivity of La0.67(CaxSr1−x)0.33MnO3 (x=0, 0.5, 1) and La0.6Y0.07Ca0.33MnO3 pellets between 10 and 300 K
807
Thermal conductivity of leaf compost used in biofilters: An experimental and theoretical investigation
808
Thermal conductivity of limestone from Gaziantep (Turkey)
809
Thermal conductivity of liquid 1,1,1,3,3,3-hexafluoropropane (HFC-236fa) from 253 K to 373 K and pressure up to 30 MPa
810
Thermal conductivity of liquid octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) from molecular dynamics simulations
811
Thermal conductivity of liquid phase sintered silicon carbide
812
Thermal Conductivity of Liquid Tin and Indium
813
Thermal conductivity of lower-mantle minerals
814
Thermal conductivity of low-temperature sintered calcium aluminosilicate glass–silicon nitride whisker composites
815
Thermal conductivity of magnetically aligned carbon nanotube buckypapers and nanocomposites
816
Thermal conductivity of ME771 glass–epoxy laminate from millikelvin temperatures to 4 K
817
Thermal conductivity of metal-organic framework 5 (MOF-5): Part I. Molecular dynamics simulations
818
Thermal conductivity of methane hydrate-bearing Ulleung Basin marine sediments: Laboratory testing and numerical evaluation
819
Thermal conductivity of MgO periclase at high pressure: Implications for the D″ region
820
Thermal conductivity of MgO, MgSiO3 perovskite and post-perovskite in the Earthʹs deep mantle
821
Thermal conductivity of micro-and nanostructural epoxy composites at low temperatures
822
Thermal Conductivity of Mineral Wool Materials Partially Saturated by Water
823
Thermal conductivity of mixed alkali silicate glasses at low temperature
824
Thermal Conductivity of Molten Lead-Free Solders
825
Thermal conductivity of multicomponent polyatomic dilute gas mixtures
826
Thermal conductivity of MWCNT/epoxy composites: The effects of length, alignment and functionalization Original Research Article
827
Thermal conductivity of nanocomposites with high volume fractions of particles
828
Thermal conductivity of nanocrystalline carbon films studied by pulsed photothermal reflectance
829
Thermal Conductivity of Nanofluids – Experimental and Theoretical
830
Thermal conductivity of nanofluids containing high aspect ratio fillers
831
Thermal conductivity of nanoporous ZrO2–4 mol% Y2O3 multilayer coatings fabricated by EB-PVD
832
Thermal conductivity of near-stoichiometric (U, Er)O2 solid solutions
833
Thermal conductivity of negative-thermal-expansion oxide, Zr1−xYxW2O8 (x=0.00, 0.01)—temperature dependence and effect of structural phase transition
834
Thermal conductivity of neptunium dioxide
835
Thermal conductivity of neutron irradiated Be12Ti
836
Thermal conductivity of Newtonian and non-Newtonian liquids
837
Thermal conductivity of Ni3Al with ternary additions
838
Thermal conductivity of Ni3Al with ternary additions
839
Thermal conductivity of Ni3X and Pt3X in ordered and disordered states
840
Thermal conductivity of Ni3X and Pt3X in ordered and disordered states
841
Thermal conductivity of Ni-Al powder compacts for reaction synthesis
842
Thermal Conductivity of Nitrogen-Methane Mixtures at Temperatures Between 300 and 425 K and at Pressures Up to 16 MPa
843
Thermal conductivity of non-Newtonian nanofluids: Experimental data and modeling using neural network
844
Thermal conductivity of non-stoichiometric americium oxide: A molecular dynamics study
845
Thermal Conductivity of Normal Liquid 3He in Aerogel
846
Thermal Conductivity of Opacified Powder Filler Materials for Vacuum Insulations1
847
Thermal conductivity of organic superconductors in oriented magnetic field
848
Thermal conductivity of organoplastics
849
Thermal conductivity of packed beds consisting of porous particles wetted with binary mixtures
850
Thermal conductivity of particle filled polyethylene composite materials
851
Thermal conductivity of particle filled polyethylene composite materials
852
Thermal conductivity of periodic array of intermolecular junctions of silicon nanowires
853
Thermal conductivity of plasma sprayed Sm2Zr2O7 coatings
854
Thermal conductivity of plasma-sprayed W/SiC composite for high-temperature energy applications
855
Thermal conductivity of polycrystalline and amorphous Se–Te–Cu system Original Research Article
856
Thermal Conductivity of Polymethyl Methacrylate (PMMA) and Borosilicate Crown Glass BK7
857
Thermal conductivity of porous alumina ceramics prepared using starch as a pore-forming agent
858
Thermal conductivity of porous SiC composite ceramics derived from paper precursor
859
Thermal conductivity of powder silica hollow spheres
860
Thermal conductivity of pressed powder compacts: tin oxide and alumina
861
Thermal conductivity of propane and butane in the liquid phase
862
Thermal conductivity of PTFE and PTFE composites
863
Thermal conductivity of pyrochlore R2Ti2O7 (R=rare earth)
864
Thermal conductivity of rare earth–uranium ternary oxides of the type RE6UO12
865
Thermal Conductivity of Reduced Graphene Oxide by Pulse Laser in Ethylene Glycol
866
Thermal Conductivity of Reference Solid Materials
867
Thermal conductivity of refrigerants in the liquid state: A comparison of estimation methods
868
Thermal conductivity of selected liquid foods at elevated pressures up to 700 MPa Original Research Article
869
Thermal conductivity of selective water sorbents under the working conditions of a sorption chiller
870
Thermal conductivity of semiconductor (bismuth–telluride)–semimetal (antimony) superlattice nanostructures Original Research Article
871
Thermal conductivity of SiC after heavy ions irradiation
872
Thermal conductivity of SiC ceramic fabricated by liquid infiltrating molten Si into mesocarbon microbeads-based preform
873
Thermal conductivity of silicon carbide densified with rare-earth oxide additives
874
Thermal conductivity of silver doped lanthanum manganites between 10 and 300 K Original Research Article
875
Thermal Conductivity of Simulated Fuels with Dissolved Fission Products
876
Thermal conductivity of single and multi-stacked DI-BSCCO tapes Original Research Article
877
Thermal conductivity of single-walled carbon nanotubes
878
Thermal conductivity of sintered lithium orthosilicate compacts
879
Thermal Conductivity of Sm3S4 System with Mixed Valence Sm Ions
880
Thermal Conductivity of Small Nickel Particles
881
Thermal conductivity of soft Bangkok clay from laboratory and field measurements
882
Thermal conductivity of soils and rocks from the Melbourne (Australia) region
883
Thermal Conductivity of Some Compacted Trinidadian Soils as affected by Peat Content
884
Thermal conductivity of stretched and annealed poly (p-phenylene sulfide) films
885
Thermal conductivity of strontium uranates
886
Thermal conductivity of subcooled liquid oxygen Original Research Article
887
Thermal Conductivity of Suspensions Containing Nanosized SiC Particles
888
Thermal conductivity of suspensions in shear flow fields
889
Thermal Conductivity of Suspensions of Carbon Nanotubes in Water
890
Thermal conductivity of Tecamax® SRP from millikelvin temperatures to room temperature Original Research Article
891
Thermal conductivity of ternary mixtures for concrete pavements
892
Thermal Conductivity of Ternary Refrigerant Mixtures of HFC-32/125/134a in the Liquid Phase
893
Thermal conductivity of Tetryl by modulated differential scanning calorimetry
894
Thermal conductivity of the gadolinium calcium silicate apatites: Effect of different point defect types Original Research Article
895
Thermal Conductivity of the Refrigerant Mixtures R404A, R407C, R410A, and R507A
896
Thermal conductivity of the ternary eutectic LiNO3–NaNO3–KNO3 salt mixture in the solid state using a simple inverse method
897
Thermal conductivity of thermal barrier coatings
898
Thermal conductivity of thermal barrier coatings
899
Thermal conductivity of thermally conductive composites consisting of core–shell particles with nanostructured shell layers
900
Thermal conductivity of thermally-isolating polymeric and composite structural support materials between 0.3 and 4 K Original Research Article
901
Thermal conductivity of thermoelectric thick films prepared by electrodeposition
902
Thermal Conductivity of Thermoplastic Natural Rubber (TPNR) Composite Filled with Stainless Steel Particle
903
Thermal Conductivity of Thermoplastics Reinforced with Natural Fibers
904
Thermal conductivity of thin single-crystalline germanium-on-insulator structures
905
Thermal conductivity of three-component composites of core-shell particles
906
Thermal conductivity of titanium dioxide films grown by metal-organic chemical vapor deposition
907
Thermal Conductivity of Toluene+Cyclopentane Mixtures: Measurements and Prediction
908
Thermal conductivity of Torlon between 4.2 and 300 K Original Research Article
909
Thermal conductivity of traditional ceramics. Part I: Influence of bulk density and firing temperature
910
Thermal conductivity of traditional ceramics: Part II: Influence of mineralogical composition
911
Thermal conductivity of tungsten–copper composites
912
Thermal conductivity of U3O8 from 300 to 1100 K
913
Thermal conductivity of unidirectional carbon/carbon composites with different carbon matrixes
914
Thermal conductivity of unsaturated packed beds—comparison of experimental results and estimation methods
915
Thermal conductivity of UO2+x and U4O9−y
916
Thermal conductivity of uranium–plutonium oxide fuel for fast reactors
917
Thermal Conductivity of Water Based Nanofluids Containing Decorated Multi Walled Carbon Nanotubes with Different Amount of TiO2 Nanoparticles
918
Thermal conductivity of Water-based nanofluids: Prediction and comparison of models using machine learning
919
Thermal conductivity of wood—models for different stages of combustion
920
Thermal Conductivity of Xonotlite Insulation Material
921
Thermal conductivity of Y6WO12 and Yb6WO12 ceramics
922
Thermal conductivity of yttria-stabilized zirconia–hafnia solid solutions Original Research Article
923
Thermal conductivity of zirconia based inert matrix fuel: use and abuse of the formal models for testing new experimental data
924
Thermal conductivity of zirconia coatings with zig-zag pore microstructures Original Research Article
925
Thermal conductivity of zirconia–alumina composites
926
Thermal conductivity of λ-(BETS)2GaCl4 under oriented magnetic fields
927
Thermal conductivity prediction of a Cu circular nanowire
928
Thermal conductivity predictions of composites containing percolated networks of uniform cylindrical inclusions
929
Thermal conductivity probe length to radius ratio problem when measuring building insulation materials
930
Thermal conductivity studies of novel nanofluids based on metallic silver decorated mesoporous silica nanoparticles
931
Thermal conductivity tensor of single crystalline Co-doped BaFe2As2
932
Thermal conductivity through various restorative lining materials
933
Thermal conductivity variation on natural convection flow of water–alumina nanofluid in an annulus
934
Thermal conductivity, heat capacity, and compressibility of atactic poly(propylene) under high pressure
935
Thermal conductivity, rheological behaviour and density of non-Newtonian ethylene glycol-based SnO2 nanofluids
936
Thermal conductivity, shear viscosity and specific heat of rigid water models
937
Thermal Conductivity, Thermal Diffusivity, and Heat Capacity of Gaseous Argon and Nitrogen
938
Thermal conductivity, viscosity, and heat transfer process in nanofluids: A critical review
939
Thermal consequences of thrust faulting: simultaneous versus successive fault activation and exhumation
940
Thermal consideration of CANDU-SCWR sliding pressure startup through subchannel analysis Original Research Article
941
Thermal considerations in inferring frictional heating from vitrinite reflectance and implications for shallow coseismic slip within the Nankai Subduction Zone
942
Thermal considerations on the design and operation of lens ducts
943
Thermal constraint considerations in design of a heat recovery boiler
944
Thermal constraints on disposal of heat-emitting waste in argillaceous rocks
945
Thermal Constraints on Earthquake Depths in California
946
Thermal constraints on the survival of primitive blobs in the lower mantle
947
Thermal constraints on the survival of primitive blobs in the lower mantle
948
Thermal constraints to population growth of bacterial-feeding nematodes
949
Thermal constraints to population growth of bacterial-feeding nematodes
950
Thermal constriction phenomenon in fretting: Theory and implications
951
Thermal contact conductance and its dependence on load cycling
952
Thermal contact conductance in advanced AC calorimetry
953
Thermal contact conductance of coated surfaces
954
Thermal contact conductance of pressed contacts at low temperatures Original Research Article
955
Thermal contact conductance under low applied load in a vacuum environment
956
Thermal contact conductance: effect of overloading and load cycling
957
Thermal contact resistance at low contact pressure: Effect of elastic deformation
958
Thermal contact resistance at the interface of double tubes assembled by plastic deformation
959
Thermal contact resistance between plasma-sprayed particles and flat surfaces
960
Thermal contact resistance correlation for metals across bolted joints
961
Thermal contact resistance estimation and metallurgical transformation identification during the hot stamping
962
Thermal contact resistance of different materials between 0.3 K and 4.5 K
963
Thermal contraction crack polygons on Mars: A synthesis from HiRISE, Phoenix, and terrestrial analog studies
964
Thermal contrast detected with a quantum detector
965
Thermal contrast detected with a thermal detector
966
Thermal control and performance assessment of a proton exchanger membrane fuel cell generator
967
Thermal control coatings on magnesium alloys prepared by plasma electrolytic oxidation
968
Thermal Control Methods for Reducing Heat in 3D ICs - TSV (Through-Silicon-Via)
969
Thermal control of a discontinuously occupied building using a classical and a fuzzy logic approach
970
Thermal Control of Building Using Latent Heat Storage South Wall
971
Thermal control of spaceborne image sensor using heat pipe cooling system
972
Thermal control of the liquid lithium divertor for NSTX
973
Thermal control of transmittance/diffraction states of holographic structures composed of polymer and liquid crystal phases
974
Thermal control to maximize photovoltaic powered reverse osmosis desalination systems productivity Original Research Article
975
Thermal control via state feedback using a low order model built from experimental data by the Modal Identification Method
976
Thermal convection for a thermo-dependent yield stress fluid in an axisymmetric horizontal duct
977
Thermal convection heated both volumetrically and from below: Implications for predictions of planetary evolution
978
Thermal Convection in a (Kuvshiniski-type) Viscoelastic Rotating Fluid in the Presence of Magnetic Field through Porous Medium
979
Thermal convection in a heterogeneous mantle
980
Thermal convection in a horizontal porous layer with spatially periodic boundary temperatures: small Ra flow
981
Thermal Convection in a Plane Layer Rotating About a Horizontal Axis
982
Thermal convection in a porous toroidal thermosyphon
983
Thermal convection in a rotating layer of a magnetic fluid
984
Thermal convection in a rotating viscoelastic fluid saturated porous layer
985
Thermal convection in a simple fluid with fading memory
986
Thermal convection in a sparcely packed porous layer saturated with suspended particles
987
Thermal convection in a vertical porous slot with spatially periodic boundary temperatures: low Ra flow
988
Thermal convection in an acoustic field
989
Thermal convection in ice-I shells of Titan and Enceladus
990
Thermal Convection in the Great Artesian Basin, Australia
991
Thermal convection in the porous methane-soaked regolith in Titan: Finite amplitude convection
992
Thermal convection in the porous methane-soaked regolith of Titan: Investigation of stability
993
Thermal convection initiated by the quasistatic component of the microacceleration field on the “Mir” orbital station
994
Thermal convection of a viscoelastic fluid in a fluid-porous system subjected to a horizontal plane Couette flow
995
Thermal convection of compressible fluid in the mantle of super-Earths
996
THERMAL CONVECTION OF ROTATING MICROPOLAR FLUID IN HYDROMAGNETICS SATURATING A POROUS MEDIUM.
997
Thermal convection of viscoelastic fluid with Biot boundary conduction
998
Thermal convection over flat plates possessing an irregular leading edge
999
Thermal convection with a water ice I rheology: Implications for icy satellite evolution
1000
Thermal convection with the Cattaneo–Christov model
