ليست عنوان مقالات لاتين Optimization of FSW process parameters for welding dissimilar 6061 and 7075 Al alloys using Taguchi design approach Optimization of pectin extraction assisted by microwave from apple pomace using response surface methodology Original Research Article

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Optimization of FSW process parameters for welding dissimilar 6061 and 7075 Al alloys using Taguchi design approach

2

Optimization of fuel production from waste vehicle tires by pyrolysis and resembling to diesel fuel by various desulfurization methods

3

Optimization of fuel ratio in solution combustion method for fabrication of nickel aluminate spinel used in the esterification reaction

4

Optimization of fuel/air mixture formation for stoichiometric diesel combustion using a 2-spray-angle group-hole nozzle

5

Optimization of fully coupled electrostatic–fluid–structure interaction problems

6

Optimization of fumaric acid production by Rhizopus delemar based on the morphology formation

7

Optimization of Functional Properties of Three Stabilizers and κ-carrageenan in Ice Cream and Study of their Synergism

8

Optimization of Functionally Graded Beams Resting on Elastic Foundations

9

Optimization of functions of matrices with an application in statistics Original Research Article

10

Optimization of functions with rank-two variation over a box

11

Optimization of fungal polygalacturonase synthesis by Saccharomyces cerevisiae in fed-batch culture

12

Optimization of fungal polygalacturonase synthesis by Saccharomyces fungal polygalacturonase synthesis by Saccharomyces

13

Optimization of furfural and 5-hydroxymethylfurfural production from wheat straw by a microwave-assisted process

14

Optimization of furfural production from d-xylose with formic acid as catalyst in a reactive extraction system

15

Optimization of furfural production from hemicellulose extracted from delignified palm pressed fiber using a two-stage process Original Research Article

16

Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology

17

Optimization of Fused Deposition Modeling Process Parameters to Achieve Maximum Mechanical Properties Using Response Surface Methodology

18

Optimization of Fused Deposition Modelling (FDM) Process Parameters Using Bacterial Foraging Technique

19

Optimization of Fuse-Recloser Coordination and Dispersed Generation Capacity in Distribution Systems

20

OPTIMIZATION OF FUZZY CLUSTERING CRITERIA BY A HYBRID PSO AND FUZZY C-MEANS CLUSTERING ALGORITHM

21

Optimization of Fuzzy Controller for an SMA-actuated Artificial Finger Robot

22

Optimization of fuzzy membership functions via PSO and GA with application to quad rotor

23

Optimization of fuzzy model using genetic algorithm for process control application

24

Optimization of fuzzy production inventory models

25

Optimization of fuzzy relation equations with max-product composition

26

Optimization of fuzzy relational equations with max-av composition

27

Optimization of Fuzzy Zero- Base Budgeting

28

Optimization of fuzzy-logic speed controller for DC drive system with elastic joints

29

Optimization of GaAs amplification photodetectors for 700% quantum efficiency

30

Optimization of gain and energy conversion efficiency using front-facing photovoltaic cell luminescent solar concentratordesign

31

Optimization of Gamma Aminobutyric Acid Production from Various Protein Hydrolysates by Lactiplantibacillus plantarum MCM4

32

Optimization of Gamma Knife treatment planning via guided evolutionary simulated annealing

33

Optimization of gammaaminobutyric acid production by probiotic bacteria through response surface methodology

34

Optimization of Gamma-Aminobutyric Acid Production in Probiotics Extracted from Local Dairy Products in West Region of Iran using MRS broth and Whey Protein Media

35

Optimization of gamma-ray beams produced by a laser-plasma accelerator

36

Optimization of gamma-ray beams produced by a laser-plasma accelerator

37

Optimization of Garden radish (Raphanus Sativus L.) Peroxidase Enzyme for Removal of 2,4-dichlorophenol from 2,4- Dichlorophenoxyacetic Acid Wastewater

38

Optimization of gas chromatographic–mass spectrometric analysis for fatty acids in hydrogenated castor oil obtained by catalytic transfer hydrogenation

39

Optimization of gas chromatographic–mass spectrometric analysis for fatty acids in hydrogenated castor oil obtained by catalytic transfer hydrogenation Original Research Article

40

Optimization of gas chromatography–single quadrupole mass spectrometry conditions for multiresidue analysis of pesticides in grapes in compliance to EU-MRLs

41

Optimization of gas diffusion electrode for polybenzimidazole-based high temperature proton exchange membrane fuel cell: Evaluation of polymer binders in catalyst layer

42

Optimization of gas diffusion media for elevated temperature polymer electrolyte fuel cells

43

Optimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis

44

Optimization of gas mixing system of premixed burner based on CFD analysis

45

Optimization of gas tungsten arc welding process by response surface methodology

46

OPTIMIZATION OF GAS TURBINE POWER PLANT BY EVOLOUTIONARY ALGORITHM; CONSIDERING EXERGY, ECONOMIC an‎d ENVIRONMENTAL ASPECTS

47

Optimization of gas utilization in plasma processes

48

Optimization of Gateway Deployment with Load Balancing and Interference Minimization in Wireless Mesh Networks

49

Optimization of GC–ICPMS system parameters for the determination of butyltin compounds in Hungarian freshwater origin sediment and mussel samples

50

Optimization of GDLs for high-performance PEMFC employing stainless steel bipolar plates

51

Optimization of gear ratios and gear-shifting strategy for enhanced efficiency in tracked vehicles

52

Optimization of gelatin extraction and physico-chemical properties of catfish (Clarias gariepinus) bone gelatin

53

Optimization of gelatine extraction from grass carp (Catenopharyngodon idella) fish skin by response surface methodology

54

Optimization of gelatine gel preparation from New Zealand hoki (Macruronus novaezelandiae) skins and the effect of transglutaminase enzyme on the gel properties

55

Optimization of gelatinolytic enzyme production by B. amyloliquefaciens sp. H11 through Plackett–Burman design and response surface methodology

56

Optimization of Gelation to Prepare Hollow Foam Shell of Resorcinol-Formalin Using a Phase-Transfer Catalyst

57

Optimization of gene sequences under constant mutational pressure and selection

58

Optimization of Gene Transfection in Murine Myeloma Cell Lines using Different Transfection Reagents

59

Optimization of general nonlinear input-output systems Original Research Article

60

Optimization of generalized mean square error in signal processing and communication

61

Optimization of generator temperatures in the heat operated absorption cycle using four types of aqueous salt solutions

62

Optimization of geometric parameters for design a high-performance ejector in the proton exchange membrane fuel cell system using artificial neural network and genetic algorithm

63

Optimization of geometric parameters for Marinelli beaker to maximize the detection efficiency of an HPGe detector

64

Optimization of geometric parameters for Marinelli beaker to maximize the detection efficiency of an HPGe detector

65

Optimization of geometrical characteristics of perforated plates

66

Optimization of geometrical parameters for Stirling engines based on theoretical analysis

67

Optimization of geometrically nonlinear elastic-plastic structures under stiffness constraints

68

Optimization of geometrically non-linear symmetric systems with coincident critical points

69

Optimization of geometry for lateral buckling process of a cantilever beam in the elastic region

70

Optimization of Geoscience Laser Altimeter System waveform metrics to support vegetation measurements

71

Optimization of germination process of cowpea by response surface methodology

72

Optimization of Glare Block Spacing

73

Optimization of glass–ceramic sealant compositions in the system MgO–BaO–SiO2 for solid oxide fuel cells (SOFC)

74

Optimization of glassy carbon electrode based graphene/ferritin/glucose oxidase bioanode for biofuel cell applications

75

Optimization of glenoid fixation in reverse shoulder arthroplasty using 3-dimensional modeling

76

Optimization of global and local pollution control in electricity production from coal burning

77

Optimization of globin lentiviral vector design for the treatment of β-thalassemia

78

Optimization of glottic exposure during intubation of a patient lying supine on the ground

79

Optimization of glucose formation in karanja biomass hydrolysis using Taguchi robust method

80

Optimization of glucose-6-phosphate dehydrogenase releasing from Candida guilliermondii by disruption with glass beads

81

Optimization of Glutathione S-Transferase in the Sera of Young Female Iraqi Patients with Diabetes Mellitus Type1Optimization of Glutathione S-Transferase in the Sera of Young Female Iraqi Patients with Diabetes Mellitus Type1

82

Optimization of Gluten-Free Bread Formulation Using Sorghum, Rice, and Millet Flour by D-Optimal Mixture Design Approach

83

Optimization of glycemic control and restenosis prevention in diabetic patients undergoing percutaneous coronary interventions

84

Optimization of glycerol ketalization to produce solketal as biodiesel additive in a continuous reactor with subcritical acetone using Purolite® PD206 as catalyst

85

Optimization of gold-nanoparticle-based optical fibre surface plasmon resonance (SPR)-based sensors

86

Optimization of gradient elution conditions in multicomponent preparative liquid chromatography

87

Optimization of gradient reversed phase chromatographic peak capacity for low molecular weight solutes

88

Optimization of graffiti removal on natural stone by means of high repetition rate UV laser

89

Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering Original Research Article

90

Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach

91

Optimization of Greenhouse Substrate Heating

92

Optimization of grid independent diesel-based hybrid system for power generation using improved particle swarm optimization algorithm

93

Optimization of grid-connected microgrid consisting of PV/FC/UC with considered frequency control

94

Optimization of Grignard ring-opening of α-brominated dioxolanes for the preparation of β-hydroxy-protected vinyl ethers by a three-step one-pot procedure

95

OPTIMIZATION OF GRI-MECH 3.0 MECHANISM USING HCCI COMBUSTION MODELS AND GENETIC ALGORITHM

96

Optimization of grinding parameters in the production of colorant paste

97

Optimization of grinding process parameters using enumeration method

98

Optimization of groove dimensions in herringbone-grooved journal bearings for improved repeatable run-out characteristics

99

Optimization of grounding grids by response surfaces and genetic algorithms

100

Optimization of growth conditions for the isolation of dextran producing Leuconostoc spp. from indigenous food sources

101

Optimization of Growth Conditions of Lentinus edodes Mycelium and polysaccharides on Walnut shell by-products Using Response Surface Analysis

102

Optimization of growth media for obtaining high-cell density cultures of halophilic archaea (family Halobacteriaceae) by response surface methodology

103

Optimization of growth of ternary CuInS2 thin films by ionic reactions in alkaline chemical bath as n-type photoabsorber layer

104

Optimization of H2 photo-fermentation from benzoate by Rhodopseudomonas palustris using a desirability function approach

105

Optimization of H2 production with CO2 capture by steam reforming of methane integrated with a chemical-looping combustion system

106

Optimization of H2SO4-catalyzed hydrothermal pretreatment of rapeseed straw for bioconversion to ethanol: Focusing on pretreatment at high solids content

107

Optimization of hairy root induction in chicory (Cichorium intybus L.) and effects of nanoparticles on secondary metabolites accumulation

108

Optimization of Halopemide for Phospholipase D2 inhibition

109

Optimization of Hand Gesture Object Detection Using Fine-Tuning Techniques on an Integrated Service of Smart Robot

110

OPTIMIZATION OF HARAZ DAM RESERVOIR OPERATION USING CBO METAHEURISTIC ALGORITHM

111

Optimization of hardening of Al–Zr–Sc cast alloys

112

Optimization of Hardness Strengths Response of Plantain Fibers Reinforced Polyester Matrix Composites (PFRP) Applying Taguchi Robust Design

113

Optimization of harvesting age in an integral age-dependent model of population dynamics

114

Optimization of HDPE direct fluorination conditions by XPS studies

115

Optimization of Head CT Protocol to Reduce the Absorbed Dose in Eye Lenses and Thyroid: A Phantom Study

116

Optimization of headspace experimental factors to determine chlorophenols in water by means of headspace solid-phase microextraction and gas chromatography coupled with mass spectrometry and parallel factor analysis Original Research Article

117

Optimization of headspace sampling using solid-phase microextraction for volatile components in tobacco

118

Optimization of headspace single-drop microextraction technique for extraction of light hydrocarbons (C6–C12) and its potential applications

119

Optimization of headspace solid phase microextraction (HS-SPME) for gas chromatography mass spectrometry (GC-MS) analysis of aroma compound in palm sugar (Arenga pinnata)

120

Optimization of headspace solid phase microextraction (HS-SPME) for gas chromatography mass spectrometry (GC-MS) analysis of aroma compound in palm sugar (Arenga pinnata)

121

Optimization of headspace solid phase microextraction based on nano-structured ZnO combined with gas chromatography–mass spectrometry for preconcentration and determination of ultra-traces of chlorobenzenes in environmental samples

122

Optimization of headspace solid phase microextraction for gas chromatography/mass spectrometry analysis of widely different volatility and polarity terpenoids in olibanum

123

Optimization of headspace solid-phase microextraction by means of an experimental design for the determination of methyl tert.-butyl ether in water by gas chromatography–flame ionization detection

124

Optimization of headspace solid-phase microextraction conditions for the determination of organophosphorus insecticides in natural waters

125

Optimization of headspace solid-phase microextraction for analysis of ethyl carbamate in alcoholic beverages using a face-centered cube central composite design Original Research Article

126

Optimization of headspace solid-phase microextraction for analysis of β-caryophyllene in a nanoemulsion dosage form prepared with copaiba (Copaifera multijuga Hayne) oil Original Research Article

127

Optimization of headspace solid-phase microextraction for the analysis of specific flavors in enzyme modified and natural Cheddar cheese using factorial design and response surface methodology

128

Optimization of headspace solid-phase microextraction gas chromatography-atomic emission detection analysis of monomethylmercury

129

Optimization of Headspace Temperature and Time Sampling for Identification of Palm Sugar Volatile Components Using Response Surface Methodology

130

Optimization of Health Transformation Plan by Drug Utilization Review Strategy in a Pediatric Teaching Hospital

131

Optimization of Heart Failure Patients Discharge Plan in Rajaie Cardiovascular Medical and Research Center: An Action Research

132

Optimization of heat conduction using combinatorial optimization algorithms

133

Optimization of heat exchanger designs in metal hydride based hydrogen storage systems

134

Optimization of heat exchanger network

135

Optimization of heat exchangers with vortex-generator fin by Taguchi method

136

Optimization of heat pipe with axial “Ω”-shaped micro grooves based on a niched Pareto genetic algorithm (NPGA)

137

Optimization of heat pump fruit dryers Original Research Article

138

Optimization of heat pump system in indoor swimming pool using particle swarm algorithm

139

Optimization of heat recovery steam generators for combined cycle gas turbine power plants

140

Optimization of heat sink configuration for thermoelectric cooling system based on entropy generation analysis

141

Optimization of Heat Sink Geometries for Impingement Air-Cooling of LSI Packages

142

Optimization of Heat Sink Geometries for Impingement Air-Cooling of LSI Packages

143

Optimization of heat transfer characteristics, flow distribution, and reaction processing for a microstructured reactor/heat-exchanger for optimal performance in platinum catalyzed ammonia oxidation

144

Optimization of heat transfer device and analysis of heat & mass transfer on the finned multi-tubular metal hydride tank

145

Optimization of Heat Transfer Enhancement of a Domestic Gas Burner Based on Pareto Genetic Algorithm: Experimental and Numerical Approach

146

OPTIMIZATION OF HEAT TRANSFER ENHANCEMENT OF A FLAT PLATE BASED ON PARETO GENETIC ALGORITHM

147

Optimization of Heat Transfer in an Enclosure with a Trombe Wall and Solar Chimney

148

Optimization of heat transfer performances of a heat-recirculating ceramic burner during methane/air and low-calorific-fuel/air combustion

149

Optimization of heat transfer utilizing graph based evolutionary algorithms

150

Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC

151

Optimization of heat treatment in cold-drawn 6063 aluminium tubes

152

Optimization of heat treatment technique of high-vanadium high-speed steel based on back-propagation neural networks

153

Optimization of heating and cooling of a building by employing refuse and renewable energy

154

Optimization of heat–mass transfer at continuous solid layer crystallization on a belt

155

Optimization of heavy metals chlorides resistance by Staphylococcus aureus and its ability to remove them

156

Optimization of heavy metals total emission, case study: Bor (Serbia)

157

Optimization of He-cooled divertor cooling fingers using a CAD-FEM method

158

Optimization of hedging rules for hydropower reservoir operation

159

Optimization of heme iron analysis in raw and cooked red meat

160

Optimization of heterogeneous biodiesel production from waste cooking palm oil via response surface methodology

161

Optimization of heterotrophic cultivation of Chlorella sp. for oil production

162

OPTIMIZATION OF HFDS PRODUCTION FROM DATE SYRUP

163

Optimization of hierarchical routing protocols

164

Optimization of high energy intensity systems, case study: Electric arc furnace

165

Optimization of high free fatty acid reduction in mixed crude palm oils using circulation process through static mixer reactor and pilot-scale of two-step process

166

Optimization of High Molecular Weight Pullulan Production by Aureobasidium pullulans in Batch Fermentations

167

OPTIMIZATION OF HIGH-CROWD-DENSITY FACILITIES BASED ON DISCRETE EVENT SIMULATION

168

Optimization of high-dose-rate cervix brachytherapy applicator placement: The benefits of intraoperative ultrasound guidance

169

Optimization of Higher Order Pulse Shapers Used for Reduction of Noise in Amplifier Circuits

170

Optimization of highly conductive insert architecture for cooling a rectangular chip

171

OPTIMIZATION OF HIGH-PERFORMANCE CONCRETE STRUCTURES BY VARIABLE NEIGHBORHOOD SEARCH

172

Optimization of high-pressure shell-and-tube heat exchanger for syngas cooling in an IGCC

173

Optimization of high-solid waste activated sludge concentration for hydrogen production in microbial electrolysis cells and microbial community diversity analysis

174

Optimization of high-voltage self-blast interrupters by gas flow and electric field computations

175

Optimization of highway networks and traffic forecasting

176

Optimization of HIPE Foams

177

Optimization of Holding Temperature and Holding Thickness for Controlled Rolling on Plate Mill Original Research Article

178

Optimization of Hole Cleaning in Deviated Wells Using Metaheuristic Algorithms

179

Optimization of hole-making operations for injection mould using particle swarm optimization algorithm

180

Optimization of hollow cathode diameter for particle beam/hollow cathode glow discharge atomic emission spectrometry

181

Optimization of hollow fibers membrane wastewater treatment: An experimental study Original Research Article

182

Optimization of Hollow-Fiber Design and Low-Pressure Membrane System Operation

183

Optimization of homoexopolysaccharide formation by lactobacilli in gluten-free sourdoughs Original Research Article

184

Optimization of homogenization for a low alloyed AlMgSi alloy

185

Optimization of honey-must preparation and alcoholic fermentation by Saccharomyces cerevisiae for mead production

186

Optimization of honing wheel structure parameters in ultra-precision plane honing

187

Optimization of horizontal drain dimensions in heterogeneous earth dams using Artificial Neural Network (ANN): A case study on Marvak dam

188

Optimization of horizontal drain dimensions in homogeneous earth dams using neural network

189

Optimization of Horizontal Road Alignment Based on Parameters Affecting its Cost and Lifespan Using Genetic Algorithm

190

Optimization of horseradish peroxidase-catalyzed enhanced chemiluminescence reaction by full factorial design

191

Optimization of Hospital Layout through the Application of Heuristic Techniques (Diamond Algorithm) in Shafa Hospital (2009)

192

Optimization of host glass composition to make soda borosilicate glasses doped with reduced rare earth ions

193

Optimization of hot air drying of olive leaves using response surface methodology Original Research Article

194

Optimization of Hot Metal Gas Forming by Taguchi Method for Production Step-tubes from AA6063

195

Optimization of hot pressing parameters in membrane electrode assembly fabrication by response surface method

196

Optimization of hot process parameters of Ti–6.7Al–2Sn–2.2Zr–2.1Mo–1W–0.2Si alloy with lamellar starting microstructure based on the processing map

197

Optimization of hot water extraction for sapodilla juice using response surface methodology Original Research Article

198

Optimization of hot water extraction of roselle juice using response surface methodology: a comparative study with other extraction methods

199

Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map

200

Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr–1Mo (P91) steel employing dynamic materials model

201

Optimization of hot-compressed water pretreatment of bagasse and characterization of extracted hemicelluloses

202

Optimization of hot-wire thermal flow sensor based on a neural net model

203

Optimization of HPLC conditions for quantitative analysis of aflatoxins in contaminated peanut

204

Optimization of HPLC method for determination of cefixime using 2-thiophenecarboxaldehyde as derivatizing reagent: A new approach

205

Optimization of HPLC quantification of carotenoids in cooked green vegetables—Comparison of analytical and calculated data

206

Optimization of HPLC quantification of carotenoids in cooked green vegetables—Comparison of analytical and calculated data

207

Optimization of HPMC and carbopol concentrations in non-effervescent floating tablet through factorial design

208

Optimization of HS-SPME conditions for quantification of 2-acetyl-1-pyrroline and study of other volatiles in Pandanus amaryllifolius Roxb.

209

Optimization of human interferon beta protein expression in Chinese hamster ovary cells

210

Optimization of human Peripheral Blood Mononuclear Cells (PBMCs) cryopreservation

211

Optimization of Human Recognition from the Iris Images using the Haar wavelet

212

Optimization of human serum albumin monoliths for chiral separations and high-performance affinity chromatography

213

Optimization of HVAC systems for distributed generation as a function of different types of heat sources and climatic conditions

214

Optimization of hybrid – ground coupled and air source – heat pump systems in combination with thermal storage

215

Optimization of Hybrid Composite Laminate Based on the Frequency using Imperialist Competitive Algorithm

216

Optimization of hybrid desalination processes including multi stage flash and reverse osmosis systems Original Research Article

217

Optimization of hybrid ethanol dehydration systems

218

Optimization of hybrid hyperbranched polymer/ceramic filters for the efficient absorption of polyaromatic hydrocarbons from water

219

Optimization of hybrid inoculum development techniques for biohydrogen production and preliminary scale up

220

Optimization of hybrid PVD process of TiAlN coatings by Taguchi method

221

Optimization of hybrid solar energy sources/wind turbine systems integrated to utility grids as microgrid (MG) under pool/bilateral/hybrid electricity market using PSO

222

Optimization of hybrid thermoplastic composite structures using surrogate models and genetic algorithms

223

Optimization of hybridized seawater desalination process

224

Optimization of hydraulic fracture geometry in gas condensate reservoirs

225

Optimization of hydraulically fractured well configuration in anisotropic coal-bed methane reservoirs

226

Optimization of hydride generation atomic fluorescence spectrometry for the determination of trace amounts of germanium: emphasis on acidity and interferences Original Research Article

227

Optimization of hydrocyclone operation using a geno-fuzzy algorithm Original Research Article

228

Optimization of hydrodynamic treatment regime in the processes of sorption–flocculation water purification from organic contaminants

229

Optimization of hydrogen bonds for combined DNA/collagen complex

230

Optimization of hydrogen charging process parameters for an advanced complex hydride reactor concept

231

Optimization of Hydrogen Distribution Network by Imperialist Competitive AlgorithmIn

232

Optimization of hydrogen distribution systems with pressure constraints

233

Optimization of hydrogen feeding procedure in PEM fuel cell systems for transportation

234

Optimization of hydrogen peroxide in totally chlorine free bleaching of cellulose pulp from olive tree residues

235

Optimization of hydrogen production by Chemical-Looping auto-thermal Reforming working with Ni-based oxygen-carriers

236

Optimization of Hydrogen Production by Ethanol Steam Reforming Using Maximization of H2/CO Ratio with Taguchi Experimental Design Method

237

Optimization of hydrogen production by filtration combustion of methane by oxygen enrichment and depletion

238

Optimization of hydrogen production by filtration combustion of natural gas by water addition

239

Optimization of hydrogen production by hyperthermophilic eubacteria, Thermotoga maritima and Thermotoga neapolitana in batch fermentation

240

Optimization of hydrogen production by Rhodobacter sphaeroides NMBL-01

241

Optimization of hydrogen production in a granule-based UASB reactor

242

Optimization of hydrogen production in in-situ catalytic adsorption (ICA) steam gasification based on Response Surface Methodology

243

Optimization of hydrogen production via coupling of the Fischer–Tropsch synthesis reaction and dehydrogenation of cyclohexane in GTL technology

244

Optimization of hydrogen stations in Florida using the Flow-Refueling Location Model

245

Optimization of hydrogen storage capacity in silica-supported low valent Ti systems exploiting Kubas binding of hydrogen

246

Optimization of hydrogen storage in metal-hydride tanks

247

Optimization of hydrogen storage tubular tanks based on light weight hydrides

248

Optimization of hydrogen vehicle refueling via dynamic simulation

249

Optimization of hydrolysis conditions for the production of glucomanno-oligosaccharides from konjac using β-mannanase by response surface methodology

250

Optimization of hydrolysis conditions of Palmaria palmata to enhance R-phycoerythrin extraction

251

Optimization of hydrolytic and oxidative enzyme methods for ecosystem studies

252

Optimization of hydrolytic and oxidative enzyme methods for ecosystem studies

253

Optimization of hydro-mechanical power split transmissions

254

Optimization of hydrothermal pretreatment of wheat straw for production of bioethanol at low water consumption without addition of chemicals

255

Optimization of hydroxyl radical formation using TiO2 as photocatalyst by response surface methodology

256

Optimization of hyperplanar transition states: Application to 2D test problems Original Research Article

257

Optimization of hysteretic characteristics of damping devices based on pseudoelastic shape memory alloys

258

Optimization of Ibuprofen Delivery through Rat Skin from Traditional and Novel Nanoemulsion Formulations

259

Optimization of IC encapsulation considering fluid/structure interaction using response surface methodology

260

Optimization of ICDsʹʹ Port Sizes in Smart Wells Using Particle Swarm Optimization (PSO) Algorithm through Neural Network Modeling

261

Optimization of ice making in laminar falling films

262

Optimization of ice making period for ice storage system with flake ice maker

263

Optimization of III–V compound semiconductor heterostructures for distributed Bragg reflector applications in VCSELs

264

Optimization of Imaging Parameters in Micro-CT Scanner Based On Signal-To-Noise Ratio for the Analysis of Urinary Stone Composition

265

Optimization of imidazole amide derivatives as cannabinoid-1 receptor antagonists for the treatment of obesity

266

Optimization of immobilization conditions by conventional and statistical strategies for alkaline lipase production by Pseudomonas aeruginosa mutant cells: scale-up at bench-scale bioreactor level

267

Optimization of immobilization conditions of Mucor miehei lipase onto Florisil via polysuccinimide spacer arm using response surface methodology and application of immobilized lipase in asymmetric acylation of 2-amino-1-phenylethanols

268

Optimization of immobilization conditions of Thermomyces lanuginosus lipase on styrene–divinylbenzene copolymer using response surface methodology

269

Optimization of immobilization for selective oxidation of benzyl alcohol by Gluconobacter oxydans using response surface methodology

270

Optimization of immobilized metal ion affinity chromatography for single-step purification of recombinant ovine growth hormone expressed in Escherichia coli

271

Optimization of imperfect preventive maintenance for multi-state systems

272

Optimization of imperfect preventive maintenance for multi-state systems

273

Optimization of imperfection-sensitive symmetric systems for specified maximum load factor Original Research Article

274

Optimization of implicitly defined functions

275

Optimization of Important Factors on the Adsorption of Methyl Violet by Modified Palm Fiber Using Experimental Design Method

276

Optimization of In O transparent conductive films by Ge ion 2 3 implantation

277

Optimization of in situ construction of concrete decks: Flexure tests of compact splices of reinforcement between phases

278

Optimization of in vitro culture conditions influencing the initiation of raspberry (Rubus idaeus L. cv. Nawojka) cell suspension culture

279

Optimization of in vitro culture conditions influencing the initiation of raspberry (Rubus idaeus L. cv. Nawojka) cell suspension culture

280

Optimization of in vitro direct regeneration of multiple shoots in upland cotton (Gossypium hirsutum L.) cv. Iranian varieties

281

Optimization of In Vitro Expansion and Activation of Human Natural Killer Cells against Breast Cancer Cell Line

282

Optimization of In Vitro Micropropagation Protocol for Banana (Musa Sapientum L.) Under Different Hormonal Concentrations and Growth Media

283

Optimization of in vitro Propagation of Purple Passion Fruit (Passiflora edulis), an Important Medicinal and Ornamental Plant

284

Optimization of In vitro Propagation of Qare-Qat (Vaccinium arctostaphylus)

285

Optimization of in vitro Propagation of Qare-Qat (Vaccinium arctostaphylus)

286

Optimization of In vitro Propagation of Qare-Qat (Vaccinium arctostaphylus)

287

Optimization of in vivo X-ray fluorescence analysis methods for bone lead by simulation with the Monte Carlo code CEARXRF

288

Optimization of InAs/GaSb type-II superlattices for high performance of photodetectors

289

Optimization of inclusive fitness

290

Optimization of incubation temperature in embryonated chicken eggs inoculated with H9N2 vaccinal subtype of avian influenza virus

291

Optimization of Independent Parameters for Chickpea Threshing Using Response Surface Method (RSM)

292

Optimization of Indiaʹs power sector strategies using weight-restricted stochastic data envelopment analysis

293

Optimization of indirect immunoassay for aflatoxin B1 detection

294

Optimization of indirect parameters which affect the extractability of volatile aroma compounds from Idiazلbal cheese using analytical supercritical fluid extractions (SFE)

295

Optimization of indoor air temperature set-point for centralized air-conditioned spaces in subtropical climates

296

Optimization of indoor climate conditioning with passive and active methods using GA and CFD

297

Optimization of Indoor Production of Fresh Water Rotifer (Brachionus calyciflorus): A Preliminary Study

298

Optimization of inductively coupled plasma deep etching of GaN and etching damage analysis

299

Optimization of industrial energy systems by incorporating feedback loops into the MIND method

300

Optimization of industrial symbiosis in coffee-based eco-industrial park design

301

Optimization of In-feed Centreless Cylindrical Grinding Process Parameters Using Grey Relational Analysis

302

Optimization of infinite composite plates with quasi-triangular holes under in-plane loading

303

Optimization of influencing factors of nucleic acid adsorption onto silica-coated magnetic particles: Application to viral nucleic acid extraction from serum

304

Optimization of Influential Variables in the Development of Buprenorphine and Bupivacaine Loaded Invasome for Dermal Delivery

305

Optimization of information content in a mass spectrometry based flow-chemistry system by investigating different ionization approaches

306

Optimization of informative spectral regions for the quantification of cholesterol, glucose and urea in control serum solutions using searching combination moving window partial least squares regression method with near infrared spectroscopy

307

Optimization of informed consent for umbilical cord blood banking

308

Optimization of infrared radiation cure process parameters for glass fiber reinforced polymer composites

309

OPTIMIZATION OF INFRASTRUCTURE SYSTEMS MAINTENANCE AND IMPROVEMENT POLICIES

310

OPTIMIZATION OF INFRASTRUCTURE SYSTEMS MAINTENANCE AND IMPROVEMENT POLICIES

311

Optimization of Ingredients for the Manufacture of Sugar-free Konjac Jelly Drinks by Response Surface Methodology

312

Optimization of inhibition conditions of tetrahydrofuran hydrate formation via the fractional factorial design methodology

313

Optimization of Inhibitory Effects of Thymus daenensis Celak. and Zataria multifera Boiss. Essential Oils on Candida albicans Using Response Surface Methodology and Artiﬁcial Neural Network

314

Optimization of In-House Indirect-ELISA EITB Assays Employing Cysticercus cellulosae Antigens for Serological Detection and PCR Assays for Molecular Detection of Porcine Cysticercosis

315

Optimization of initial blank shape predicted based on inverse finite element method

316

Optimization of initial blank shape to minimize earing in deep drawing using finite element method

317

Optimization of Initial Conditions for Preferential Crystallization

318

Optimization of initial redox potential in the preparation of expandable graphite by chemical oxidation

319

Optimization of initial redox potential in the preparation of expandable graphite by chemical oxidation

320

Optimization of initial substrate and pH levels for germination of sporing hydrogen-producing anaerobes in cow dung compost

321

Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites

322

Optimization of injection holes in symmetric and asymmetric scroll compressors with vapor injection

323

Optimization of injection mold based on fuzzy moldability evaluation

324

Optimization of Injection Molding and Solvent Debinding Parameters of Stainless Steel Powder (SS316L) Based Feedstock for Metal Injection Molding

325

OPTIMIZATION OF INJECTION MOLDING PARAMETER OF Ti-6Al-4V POWDER MIX WITH PALM STEARIN AND POLYETHYLENE FOR THE HIGHEST GREEN STRENGTH BY USING TAGUCHI METHOD

326

Optimization of Injection Molding Parameters by Data Mining Method in PIM Process

327

Optimization of Injection Molding Parameters for WC-Co Feedstocks

328

Optimization of injection molding process for car fender in consideration of energy efficiency and product quality

329

OPTIMIZATION OF INJECTION MOLDING PROCESS FOR SINK MARKS REDUCTION BY INTEGRATING RESPONSE SURFACE DESIGN METHODOLOGY TAGUCHI APPROACH

330

Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method

331

Optimization of injection molding process parameters using sequential simplex algorithm

332

Optimization of Injection Moulding Process Parameters in the Moulding of High Density Polyethylene (HDPE)

333

Optimization of injection parameters for mechanical properties of specimens with weld line of polypropylene using Taguchi method

334

Optimization of injection scheduling in fractured geothermal reservoirs

335

Optimization of injection strategy to reduce fuel consumption for stoichiometric diesel combustion

336

Optimization of in-line fritless solid-phase extraction for capillary electrophoresis–mass spectrometry

337

Optimization of in-mill ball loading and slurry solids concentration in grinding of UG-2 ores: A statistical experimental design approach

338

Optimization of inner diameter of tubular bamboo charcoal anode for a microbial fuel cell

339

Optimization of input protection diode for high-speed applications ☆

340

Optimization of in-situ monolithic synthesis for immunopreconcentration in capillary

341

Optimization of In-situ Synthesis Process Parameters of LiFePO4/C-MAF-5 Surface Modification for Conductivity Improvement of Lithium-ion Battery Cathode Material by Response Surface Method

342

Optimization of inspection and maintenance decisions for infrastructure facilities under performance model uncertainty: A quasi-Bayes approach

343

Optimization of inspection schedule for a surface-breaking crack subject to fatigue loading

344

Optimization of instant jasmine rice process and its physicochemical properties Original Research Article

345

Optimization of instrumental colour analysis in dry-cured ham

346

Optimization of insulating coating formation technology on the structural materials for heavy liquid metal coolants

347

Optimization of insulation thickness for different glazing areas in buildings for various climatic regions in Turkey

348

Optimization of insulation thickness for external walls using different energy-sources

349

Optimization of Integer Wavelet Transforms Based on Difference Correlation Structures

350

Optimization of Integrated Management to use Surface Water and Groundwater Resources by Using Imperialist Competitive Algorithm and Genetic Algorithm (Tehran Plain)

351

Optimization of integrated photovoltaic–wind power generation systems with battery storage

352

Optimization of Integrated Urban Wet-Weather Control Strategies

353

Optimization of integration limit in the charge comparison method based on signal shape function

354

Optimization of integration limit in the charge comparison method based on signal shape function

355

Optimization of interactions in crystal packing revealed by crystal structures [ethyl 2-(formylamino)-3-thien-2-yl-2- (thien-2-ylmethyl)propanoate and ethyl 3-(5-bromothien-2-yl)- 2-[(5-bromothien-2-yl)methyl]-2-(formylamino)propanoate]

356

Optimization of interatomic potential for Si/SiO2 system based on force matching

357

Optimization of intercooling compression in CO2 capture systems

358

Optimization of interdigital micromixers via analytical modeling—exemplified with the SuperFocus mixer

359

Optimization of Inter-Domain Presence Traffic Based on Privacy Rule Sharing: Performance and Impact on the IMS

360

Optimization of interface structures in crystalline silicon heterojunction solar cells

361

Optimization of interleukin-21 immunotherapeutic strategies

362

Optimization of internal conditions for biocatalytic dye color removal and a comparison of redox mediatorʹs efficiency on partially purified Trichosanthes dioica peroxidase

363

Optimization of internal heat exchangers for hydrogen storage tanks utilizing metal hydrides

364

Optimization of Internal Mixing Parameter on the Electrical Conductivity of Multiwall Carbon Nanotubes/Synthetic Graphite/Epoxy Nanocomposites for Conductive Polymer Composites Using Taguchi Method

365

Optimization of interpolation method for nitrate pollution in groundwater and assessing vulnerability with IPNOA and IPNOC method in Qazvin plain

366

Optimization of interval type-2 fuzzy logic controllers for a perturbed autonomous wheeled mobile robot using genetic algorithms

367

Optimization of intracavity Q-switched laser frequency doubling

368

Optimization of intracellular microcystin extraction for their subsequent analysis by high-performance liquid chromatography

369

Optimization of in-tube enhancement for large evaporators and condensers

370

Optimization of inulin and polydextrose mixtures as sucrose replacers during sugar-free chocolate manufacture – Rheological, microstructure and physical quality characteristics Original Research Article

371

Optimization of Inulinase Production by a Fungal Species Isolated from Rotten Garlic Samples

372

Optimization of inulinase production by a newly isolated Aspergillus tubingensis CR16 using low cost substrates

373

Optimization of inulinase production by solid-state fermentation using sugarcane bagasse as substrate

374

Optimization of inulinase production from low cost substrates using Plackett–Burman and Taguchi methods

375

Optimization of Inventory Controlling System Using Integrated Seasonal Forecasting and Integer Programming

376

Optimization of inverse treatment planning using a fuzzy weight function

377

Optimization of invertase immobilization by adsorption in ionic exchange resin for sucrose hydrolysis

378

Optimization of inverted tandem organic solar cells

379

Optimization of In-vitro Permeation Pattern of Ketorolac Tromethamine Transdermal Patches

380

Optimization of InxGa1−xP/In0.2Ga0.8As/GaAs high electron mobility transistor structures grown by solid source molecular beam epitaxy

381

Optimization of Ion Energy for the Treatment of Cancerous Tumors

382

Optimization of ion-exchange displacement separations: I. Validation of an iterative scheme and its use as a methods development tool

383

Optimization of ion-exchange displacement separations: II. Comparison of displacement separations on various ion-exchange resins

384

Optimization of Ion-Exchange Protein Separations Using a Vector Quantizing Neural Network

385

Optimization of ionic liquid based ultrasonic assisted extraction of puerarin from Radix Puerariae Lobatae by response surface methodology

386

Optimization of Ionic Polymer Metal Composite Fabrication via Chemical Electroless Plating Method; Actuation Application Study

387

Optimization of ion-paired lipase for non-aqueous media: acylation of doxorubicin based on surface models of fatty acid esterification

388

Optimization of Iran’s Production in Forouzan Common Oil Filed based on Game Theory

389

Optimization of Iron Oxide Nanoparticle Preparation for Biomedical Applications by Using Box-Behenken Design

390

Optimization of iron speciation (soluble, ferrous and ferric) in beans, chickpeas and lentils

391

Optimization of irreversible solar assisted ejector-vapor compression cascaded systems

392

Optimization of irrigation water distribution networks, layout included

393

Optimization of irrigation water use in grapevines using the relationship between transpiration and plant water status

394

Optimization of Irrigation with Photovoltaic Pumping System

395

Optimization of isoamyl acetate production by using immobilized lipase from Mucor miehei by response surface methodology

396

Optimization of isochromanone based urotensin II receptor agonists Original Research Article

397

Optimization of isocratic supercritical fluid chromatography for enantiomer separation

398

OPTIMIZATION OF ISOLATION FLAXSEED MUCILAGE FROM METHANOLIC EXTRACT AND ITS FUNCTIONAL CHARACTERISTICS

399

Optimization of isolation of cellulose from orange peel using sodium hydroxide and chelating agents

400

Optimization of isotope-labeling conditions for lambertellin based on isotope patterns observed by mass spectrometry

401

Optimization of ITER Central Solenoid Insert design

402

Optimization of jaw muscle activity and fine motor control during repeated biting tasks

403

Optimization of Jet-A fuel reforming for aerospace applications

404

Optimization of JK Flip Flop Layout with Minimal Average Power of Consumption based on ACOR, Fuzzy-ACOR, GA, and Fuzzy-GA

405

Optimization of JK2LB chemical composition for ITER Central Solenoid conduit material Original Research Article

406

Optimization of job shop scheduling problems using modified clonal selection algorithm

407

optimization of justice institutions in cancellation of sharia arbitration decisions

408

Optimization of kanban-based manufacturing systems

409

Optimization of Keratinase Production for Feather Degradation by Bacillus subtilis

410

Optimization of Kerosene Aromatization over Ni/HY Catalysts Using Response Surface Methodology

411

Optimization of key factors affecting hydrogen production from food waste by anaerobic mixed cultures

412

Optimization of Key Factors in Serum Free Medium for Production of Human Recombinant GM-CSF Using Response Surface Methodology

413

Optimization of key parameters for effective vanadium substitution into cubic SBA-16 in the presence of co-surfactant at low acidity: Application in the selective oxidation of ethylbenzene

414

Optimization of key parameters in the proton exchange membrane fuel cell

415

Optimization of key process variables for enhanced hydrogen production by Enterobacter aerogenes using statistical methods

416

Optimization of key variables for the enhanced production of hydrogen by Ethanoligenens harbinense W1 using response surface methodology

417

Optimization of KFCM Clustering of Hyperspectral Data by Particle Swarm Optimization Algorithm

418

Optimization of Kinetic Model for High Rate Algal Pond Design

419

Optimization of kinetic parameters. Multipurpose KINAGDC(MW) non-linear regression program

420

Optimization of K–Ni/image-Al2O3 catalyst for high-pressure oxidative reforming of methane by radial basis function network and multivariate analysis Original Research Article

421

Optimization of Korean crop storage insulation systems

422

Optimization of krypton yields for rp-process studies at ISOLDE(CERN) Original Research Article

423

Optimization of La0.6Sr0.4CoO3-Ce0.8Gd0.2O1.9 composite cathodes for ITSOFCs

424

Optimization of La1−xSrxCoO3−δ perovskite cathodes for intermediate temperature solid oxide fuel cells through the analysis of crystal structure and electrical properties

425

Optimization of Laccase Adsorption-Desorption Behaviors on Multi-Walled Carbon Nanotubes for Enzymatic Biocathodes

426

Optimization of laccase production and its application in delignification of biomass

427

Optimization of laccase–mediator system in producing biobleached flax pulp

428

Optimization of La-Ce/HZSM-5 catalyst for thermal catalytic cracking of naphtha to light olefins to save energy and reduce CO2 emission

429

Optimization of lactic acid bacteria viability using fuzzy soft set modelling

430

Optimization of lactose utilization in deproteinated whey by Kluyveromyces marxianus using response surface methodology (RSM)

431

Optimization of lactulose synthesis from whey lactose by immobilized β-galactosidase and glucose isomerase Original Research Article

432

Optimization of laminar pipe flow using nanoparticle liquid suspensions for cooling applications

433

Optimization of laminate stacking sequence for failure load maximization using Tabu search

434

Optimization of laminated composites subject to uncertain buckling loads

435

Optimization of land use structure and spatial pattern for the semi-arid loess hilly–gully region in China

436

Optimization of landslide conditioning factors using very high-resolution airborne laser scanning (LiDAR) data at catchment scale

437

Optimization of large homogeneous air Cherenkov arrays and application to the design of a 1–100 TeV γ-ray observatory

438

Optimization of large scale bio-methane generation integrating “spilled” hydraulic energy and pressurized oxygen blown biomass gasification

439

Optimization of large simulations using statistical software

440

Optimization of large volume injection-programmable temperature vaporization-gas chromatography–mass spectrometry analysis for the determination of estrogenic compounds in environmental samples

441

Optimization of Large-Scale Hydropower System Operations

442

OPTIMIZATION OF LARGE-SCALE TRUSS STRUCTURES USING

443

Optimization of large-scale truss structures using sparse SAND formulations

444

Optimization of Laser Forming Parameters Using Genetic Algorithms

445

Optimization of laser marking with the help of simulation models

446

Optimization of laser parameters for polarizing protons in naphthalene crystals

447

Optimization of laser parameters for polarizing protons in naphthalene crystals

448

Optimization of laser patterning of textured gallium-doped zinc oxide for amorphous silicon photovoltaics

449

Optimization of laser welding process parameters for super austenitic stainless steel using artificial neural networks and genetic algorithm

450

Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts

451

Optimization of laser-induced breakdown spectroscopy for rapid geochemical analysis

452

Optimization of laser-induced forward transfer process of metal thin films

453

Optimization of lattice QCD codes for the AMD Opteron processor

454

Optimization of lattice QCD codes for the AMD Opteron processor

455

Optimization of lattice quadrupole magnets for cooler ring, S-LSR

456

Optimization of lattice quadrupole magnets for cooler ring, S-LSR

457

Optimization of layered laser crystallization for thin-film crystalline silicon solar cells

458

Optimization of layout and shape of stiffeners in 2D structures

459

Optimization of LC method for the determination of testosterone and epitestosterone in urine samples in view of biomedical studies and anti-doping research studies

460

Optimization of LC–MS/MS using triple quadrupole mass analyzer for the simultaneous analysis of carbosulfan and its main metabolites in oranges Original Research Article

461

Optimization of LDPC-Coded Turbo CDMA Systems

462

Optimization of leaching parameters for the extraction of rare earth metal using decision making method

463

Optimization of lead adsorption of mordenite by response surface methodology: characterization and modification

464

Optimization of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells

465

Optimization of lead metastable production in a low pressure argon discharge

466

Optimization of Lead-Selective Membrane Electrode Using Central Composite Experimental Design, and Study of Its Behavior with Electrochemical Impedance Spectroscopy

467

Optimization of Lentiviral Transduction Procedure for the Generation of Human Induced Pluripotent Stem Cells

468

Optimization of lentiviral vectors for the gene therapy of fanconi anemia

469

Optimization of levulinic acid from lignocellulosic biomass using a new hybrid catalyst

470

Optimization of LiFePO4 synthesis by hydrothermal method

471

Optimization of lifetime maintenance strategies for deteriorating structures considering probabilities of violating safety, condition, and cost thresholds

472

Optimization of light collection from crystal scintillators for cryogenic experiments

473

Optimization of light collection from crystal scintillators for cryogenic experiments

474

Optimization of light for growth, photosynthesis, and hydrocarbon production by the colonial microalga Botryococcus braunii BOT-22

475

Optimization of light polarization sensitivity in QWIP detectors

476

Optimization of light use efficiency for biofuel production in algae Original Research Article

477

Optimization of light-surface plasmon coupling by periodicity regulation for a pyramidal probe

478

Optimization of lignin production from empty fruit bunch via liquefaction with ionic liquid

479

Optimization of limited network capacity with toll settings

480

Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite)

481

Optimization of linear alkylbenzene sulfonate (LAS) degradation in UASB reactors by varying bioavailability of LAS, hydraulic retention time and specific organic load rate

482

Optimization of linear control systems: analytical methods and computational algorithms[Book Review}

483

Optimization of linear filters under power-spectral-density stabilization

484

OPTIMIZATION OF LINEAR OBJECTIVE FUNCTION SUBJECT TO FUZZY RELATION INEQUALITIES CONSTRAINTS WITH MAX-AVERAGE COMPOSITION

485

Optimization of linear objective function subject to Fuzzy relation inequalities constraints with max-product composition

486

Optimization of linkages for generalized rigid-body guidance synthesis based on finite element models

487

OPTIMIZATION OF LIPASE IMMOBILIZATION

488

Optimization of lipase production by Candida cylindracea in palm oil mill effluent based medium using statistical experimental design

489

Optimization of lipase synthesis by Mucor racemosus - Production in a triple impeller bioreactor

490

Optimization of lipase-catalyzed biodiesel by response surface methodology

491

Optimization of lipase-catalyzed enantioselective esterification of (±)-menthol in ionic liquid

492

Optimization of lipase-catalyzed glucose fatty acid ester synthesis in a two-phase system containing ionic liquids and t-BuOH

493

Optimization of lipase-catalyzed rosin acid starch synthesis by response surface methodology

494

Optimization of lipase-catalyzed synthesis of acetylated EGCG by response surface methodology

495

Optimization of lipase-catalyzed synthesis of diglycerol monooleate by response surface methodology

496

Optimization of lipid nanoparticle formation for beverage applications: Influence of oil type, cosolvents, and cosurfactants on nanoemulsion properties Original Research Article

497

Optimization of Lipofectamine-2000/siRNALipoplexLoaded PLGANanoparticles for Efficient EGFR Gene Silencing: An in Vitro Study

498

Optimization of lipospheres production by factorial design and their performances on a dielectrophoretic lab-on-a-chip platform

499

Optimization of liquid chromatographic method for the separation of nine hydrophilic and hydrophobic components in Salviae miltiorrhizae Radix et Rhizoma (Danshen) using microemulsion as eluent

500

Optimization of liquid chromatographic parameters for the separation of priority phenols by using mixed-level orthogonal array design

501

Optimization of liquid chromatography–multiple reaction monitoring cubed mass spectrometry assay for protein quantification: Application to aquaporin-2 water channel in human urine

502

Optimization of liquid electrostatic coating

503

Optimization of liquid fermentation of microbial consortium WSD-5 followed by saccharification and acidification of wheat straw

504

Optimization of liquid media for lipase production by Candida rugosa

505

Optimization of Liquid Swine Manure Sidedress Rate and Method for Grain Corn

506

Optimization of liquid–liquid phase separation characteristics in the Bunsen section of the sulfur–iodine hydrogen production process

507

Optimization of lithographic masks using genetic algorithms

508

Optimization of living polymerization through distributed control of a nitroxide radical

509

Optimization of LNG Cold Energy Utilization via Power Generation, Refrigeration, and Air Separation

510

Optimization of load balancing using fuzzy Q-Learning for next generation wireless networks

511

Optimization of loading conditions for tube hydroforming

512

Optimization of load-shedding scheme in an integrated process plant

513

Optimization of local control of chaos by an evolutionary algorithm

514

Optimization of local shape and appearance probabilities for segmentation of knee cartilage in 3-D MR images

515

Optimization of locally resonant acoustic metamaterials on underwater sound absorption characteristics

516

Optimization of location and size of opening in a pressure vessel cylinder using ANSYS

517

Optimization of Location and Stiffness of an Intermediate Support to Maximize the First Natural Frequency of a Beam with Tip Mass-With Application

518

Optimization of location-routing-inventory problem for perishable products with WOA and ALO algorithms

519

Optimization of logical rings for multi-hop transmissions in WDM optical star networks

520

Optimization of logistic systems using fuzzy weighted aggregation

521

Optimization of long-term storage stability of Jatropha curcas biodiesel using antioxidants by means of response surface methodology

522

Optimization of loss in orthogonal bend waveguide: Genetic Algorithm simulation

523

Optimization of low activity spectrometric gamma–gamma probes for ash determination in coal stockpiles

524

Optimization of Low Phosphorus Steel Production With Double Slag Process in BOF Original Research Article

525

Optimization of low pressure vortex tube via different axial angles of injection nozzles

526

Optimization of low temperature solar thermal electric generation with Organic Rankine Cycle in different areas

527

Optimization of low-cholesterol–low-fat mayonnaise formulation: Effect of using soy milk and some stabilizer by a mixture design approach

528

Optimization of low-cost medium for very high gravity ethanol fermentations by Saccharomyces cerevisiae using statistical experimental designs

529

Optimization of Low-Temperature Exhaust Gas Waste Heat Fueled Organic Rankine Cycle Original Research Article

530

Optimization of Low-Temperature Lipase Production Conditions and Study on Enzymatic Properties of Aspergillus Niger

531

Optimization of Low-Thrust Trajectories Using an Indirect Shooting Method without Guesses of Initial Costates

532

Optimization of LSO/LuYAP phoswich detector for small animal PET

533

Optimization of LSO/LuYAP phoswich detector for small animal PET

534

Optimization of L-Tryptophan Biosynthesis From L-Serine of Processed Iranian Beet and Cane Molasses and Indole by Induced Escherichia coli ATCC 11303 Cells

535

Optimization of luteolin separation from pigeonpea [Cajanus cajan (L.) Millsp.] leaves by macroporous resins

536

Optimization of Lysozyme – Inulin Conjugation and Investigation on its Functional Properties

537

Optimization of Machinery Use on Farms with Emphasis on Timeliness Costs

538

Optimization of machining conditions for effective turning of E0300 alloy steel

539

Optimization of machining parameters in magnetic force assisted EDM based on Taguchi method

540

Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis

541

Optimization of machining parameters of turning operations based on multi performance criteria

542

Optimization of machining processes using pattern search algorithm

543

Optimization of magnesium hydroxide composite material mixed with expanded graphite and calcium chloride for chemical heat pumps

544

Optimization of magnetic arc oscillation process parameters on mechanical properties of AA 5456 Aluminum alloy weldments

545

Optimization of magnetic calorimeters

546

Optimization of magnetic calorimeters

547

Optimization of magnetic devices using Surface Current Method (SCM)

548

Optimization of magnetic field configuration for the production of Ar ions from RIKEN 18 GHz ECR ion source

549

Optimization of magnetic field configuration for the production of Ar ions from RIKEN 18 GHz ECR ion source

550

Optimization of magneto-electro-elastic composite structures using differential evolution

551

Optimization of magneto-hydrodynamic control of diffuser flows using micro-genetic algorithms and least-squares finite elements

552

Optimization of main parameters affecting activity and octane number produced from catalytic isomerization of n-heptane using response surface methodology

553

Optimization of mainline traffic via an adaptive co-ordinated ramp-metering control model with dynamic OD estimation

554

Optimization of maintenance and spare provisioning policy using simulation

555

Optimization of maintenance policy using the proportional hazard model

556

Optimization of maintenance policy using the proportional hazard model

557

Optimization of majority protocol for controlling transactions concurrency in distributed databases by multi-agent systems

558

OPTIMIZATION OF MANDREL LENGTH FOR BLANK PIERCING IN SCREW ROLLING MILLS

559

Optimization of Manganese Removal from Water Using Response Surface Methodology

560

Optimization of manipulator drive mechanisms of hydraulic excavators on the basis of the tribological criterion

561

Optimization of manpower allocation by considering customer relationship management criteria and uncertainty conditions in car dealerships

562

Optimization of manufacturing conditions for activated carbon from Turkish lignite by chemical activation using response surface methodology

563

Optimization of manufacturing parameters for a brake lining using Taguchi method

564

Optimization of marine environmental monitoring sites in the Yangtze River estuary and its adjacent sea, China

565

Optimization of markers in clothing industry

566

Optimization of mass concrete construction using genetic algorithms

567

Optimization of mass-produced trans-tibial prosthesis made of pultruded fiber reinforced plastic

568

Optimization of mass-produced trans-tibial prosthesis made of pultruded fiber reinforced plastic

569

Optimization of material and production to develop fluoroelastomer inflatable seals for sodium cooled fast breeder reactor

570

Optimization of material characteristics of macro-defect free cement

571

Optimization of material composition of FGM hollow circular cylinder under thermal loading: a neural network approach

572

Optimization of material composition of nonhomogeneous hollow sphere for thermal stress relaxation making use of neural network Original Research Article

573

Optimization of material hoisting operations and storage locations in multi-storey building construction by mixed-integer programming

574

Optimization of material parameters for development of polyetherimide composites

575

Optimization of material parameters in 1.3-(mu)m InGaAsN-GaAs lasers

576

Optimization of material processing profiles

577

Optimization of material properties needed for material design of components made of multi-heterogeneous materials

578

Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation

579

OPTIMIZATION OF MATERIAL REMOVAL RATE, SURFACE ROUGHNESS AND TOOL LIFE ON CONVENTIONAL DRY TURNING OF FCD700

580

Optimization of material selection for evaporative desalination plants in order to achieve the highest cost-benefit ratio

581

Optimization of Material to Improve the Performance Heat Transfer in Air Condition Condenser

582

Optimization of matrix solid phase dispersion coupled with gas chromatography electron capture detection for determination of chlorinated pesticides in soil

583

Optimization of matrix solid-phase dispersion extraction method for the analysis of isoflavones in Trifolium pratense

584

Optimization of matrix solid-phase dispersion for liquid chromatography tandem mass spectrometry analysis of 12 pharmaceuticals in sediments

585

Optimization of matrix solid-phase dispersion for the rapid determination of salicylate and benzophenone-type UV absorbing substances in marketed fish

586

Optimization of Matrix Solid-Phase Dispersion method for simultaneous extraction of aflatoxins and OTA in cereals and its application to commercial samples

587

Optimization of MCSCF excited states using directions of negative curvature

588

Optimization of MDEA concentration in flow of input solvent to the absorption tower and its effect on the performance of other processing facilities of gas treatment unit in Sarakhs refinery

589

Optimization of MDSRRC with Matrix Apriori

590

Optimization of mead production using Response Surface Methodology

591

Optimization of measure parameters for an X- and gamma-ray spectrometry portable system

592

Optimization of measurement of 63Ni in reactor waste samples using 65Ni as a tracer

593

Optimization of measurement parameters in Doppler broadening spectroscopy

594

Optimization of measurements of submicron aerosol spectrum

595

Optimization of mechanical alloying parameters in 12YWT ferritic steel nanocomposite

596

Optimization of mechanical and chemical properties of sulphuric anodized aluminium using statistical experimental methods

597

Optimization of mechanical and thermo-mechanical properties of epoxy and E-glass/epoxy composites using NH2-MWCNTs, acetone solvent and combined dispersion methods

598

Optimization of mechanical characteristics of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites using the neural network approach

599

Optimization of mechanical crimping to assemble tubular components

600

Optimization of mechanical draft counter flow wet-cooling tower using artificial bee colony algorithm

601

Optimization of mechanical draft counter flow wet-cooling towers using a rigorous model

602

Optimization of mechanical properties of a micro alloyed steel

603

Optimization of mechanical properties of a Ni–Mo–Cr alloy by structural modifications induced by changes in heat treatment

604

Optimization of mechanical properties of a Ni–Mo–Cr alloy by structural modifications induced by changes in heat treatment

605

Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans

606

Optimization of mechanical properties of an HSLA-100 steel through control of heat treatment variables

607

Optimization of mechanical properties of an HSLA-100 steel through control of heat treatment variables

608

Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method

609

Optimization of mechanical properties of thermoplastic starch/clay nanocomposites

610

Optimization of mechanical properties of thermoplastic starch/clay nanocomposites

611

Optimization of mechanical properties of Ti–Fe–Sn alloys by controlling heterogeneous eutectic structure

612

Optimization of mechanical property and shape recovery behavior of Ti-(∼49 at.%) Ni alloy using artificial neural network and genetic algorithm

613

Optimization of media and temperature for enhanced antimicrobial production by bacteria associated with Rhabditis sp.

614

Optimization of media composition for hydrogen gas production from hydrolyzed wheat starch by dark fermentation

615

Optimization of media composition for Nattokinase production by Bacillus subtilis using response surface methodology

616

Optimization of media composition for the production of biohydrogen from waste glycerol

617

Optimization of media conditions for the production of ethanol from sweet sorghum juice by immobilized Saccharomyces cerevisiae

618

Optimization of media nutrient composition for increased photofermentative hydrogen production by Synechocystis sp. PCC 6803

619

Optimization of Medical PSA Units for Oxygen Production

620

Optimization of medical waste routing problem: The case of TRB1 region in Turkey

621

Optimization of Mediterranean building design using genetic algorithms

622

Optimization of medium and cultivation conditions for alkaline protease production by the marine yeast Aureobasidium pullulans

623

Optimization of medium and cultivation conditions for pullulan production by a new pullulan-producing yeast strain

624

Optimization of medium and process parameters for the production of inulinase from a newly isolated Kluyveromyces marxianus YS-1

625

Optimization of medium components for hyaluronic acid production by Streptococcus zooepidemicus MTCC 3523 using a statistical approach

626

Optimization of medium components for increased production of C-phycocyanin from Phormidium ceylanicum and its purification by single step process

627

Optimization of Medium Components Using Artificial Neural Networks

628

Optimization of medium components using response surface methodology for production of thermostable amylopullulanase in submerged fermentation by Clostridium thermosulfurogenes SVM17

629

Optimization of medium composition for alkali-stable xylanase production by Aspergillus fischeri Fxn 1 in solid-state fermentation using central composite rotary design

630

Optimization of medium composition for butyric acid production by Clostridium thermobutyricum using response surface methodology

631

Optimization of medium composition for enhanced chitin extraction from Parapenaeus longirostris by Lactobacillus helveticus using response surface methodology

632

Optimization of medium composition for exopolysaccharide production by Phellinus nigricans

633

Optimization of medium composition for keratinase production on feather by Bacillus licheniformis RG1 using statistical methods involving response surface methodology

634

Optimization of medium composition for the production of a probiotic microorganism, Lactobacillus rhamnosus, using response surface methodology

635

Optimization of medium composition for the production of elastase by Bacillus sp. EL31410 with response surface methodology

636

Optimization of medium composition for the production of exopolysaccharides from Phellinus baumii Pilلt in submerged culture and the immuno-stimulating activity of exopolysaccharides

637

Optimization of medium composition for the production of exopolysaccharides from Phellinus baumii Pilلt in submerged culture and the immuno-stimulating activity of exopolysaccharides

638

Optimization of medium compositions favoring butanol and 1,3-propanediol production from glycerol by Clostridium pasteurianum

639

Optimization of medium constituents for the production of citric acid from byproduct glycerol using Doehlert experimental design

640

Optimization of medium for decolorization of Solar golden yellow R direct textile dye by Schizophyllum commune IBL-06

641

Optimization of medium for enhancement of ε-Poly-L-Lysine production by Streptomyces sp. M-Z18 with glycerol as carbon source

642

Optimization of medium for one-step fermentation of inulin extract from Jerusalem artichoke tubers using Paenibacillus polymyxa ZJ-9 to produce R,R-2,3-butanediol

643

Optimization of medium for pullulan production using a novel strain of Auerobasidium pullulans isolated from sea mud through response surface methodology

644

Optimization of membrane area and catalyst distribution in a permeative-stage membrane reactor for methane steam reforming

645

Optimization of membrane batch processes by means of the critical flux theory Original Research Article

646

Optimization of membrane bioreactor performances during enzymatic oxidation of waste bio-polyphenols Original Research Article

647

Optimization of membrane bioreactors by the addition of powdered activated carbon

648

Optimization of membrane physical and chemical cleaning by a statistically designed approach

649

Optimization of membrane processes in white biotechnology Original Research Article

650

Optimization of membrane stack configuration for efficient hydrogen production in microbial reverse-electrodialysis electrolysis cells coupled with thermolytic solutions

651

Optimization of membrane unit for removing carbon dioxide from natural gas

652

Optimization of Mercury Thin Film Electrodes for Sono-ASV Studies

653

Optimization of Mercury Thin Film Electrodes for Sono-ASV Studies

654

Optimization of mesenchymal stem cell expansion procedures by cell separation and culture conditions modification

655

OPTIMIZATION OF MESHLESS LOCAL PETROV-GALERKIN PARAMETERS USING GENETIC ALGORITHM FOR 3D ELASTO-STATIC PROBLEMS

656

Optimization of mesoporous K/SBA-15 catalyzed transesterification of palm oil using response surface methodology

657

Optimization of Metabolism: The Evolution of Metabolic Pathways Toward Simplicity Through the Game of the Pentose Phosphate Cycle

658

Optimization of metal foils surface finishing using vibration-assisted micro-forging

659

Optimization of metal forming processes

660

Optimization of metal sulphide precipitation in fluidized-bed treatment of acidic wastewater

661

Optimization of methane cold wall chemical vapor deposition for the production of single walled carbon nanotubes and devices Original Research Article

662

Optimization of methane fermentation from effluent of bio-hydrogen fermentation process using response surface methodology

663

Optimization of methanol steam reforming over a Au/CuO–CeO2 catalyst by statistically designed experiments

664

Optimization of methanol synthesis and cyclohexane dehydrogenation in a thermally coupled reactor using differential evolution (DE) method

665

Optimization of methanol synthesis reactor using genetic algorithms

666

Optimization of methylalumoxane based composite polymeric electrolytes for lithium battery applications

667

Optimization of Mg-based fiber optic hydrogen detectors by alloying the catalyst

668

Optimization of MGI in JET using the TOKES code and mitigation of RE damage for the first wall

669

Optimization of MgTiO3–CaTiO3 based LTCC tapes containing B2O3 for use in microwave applications

670

OPTIMIZATION OF MICRO GAS TURBINE BY ECONOMIC, EXERGY an‎d ENVIRONMENT ANALYSIS USING GENETIC, BEE COLONY an‎d SEARCHING ALGORITHMS

671

Optimization of micro hardness of nanostructure Cu-Cr-Zr alloys prepared by the mechanical alloying using artificial neural networks and genetic algorithm

672

Optimization of micro heat exchanger: CFD, analytical approach and multi-objective evolutionary algorithms

673

OPTIMIZATION OF MICRO METAL INJECTION MOLDING FOR HIGHEST GREEN STRENGTH BY USING TAGUCHI METHOD

674

Optimization of microalgal productivity using an adaptive, non-linear model based strategy

675

Optimization of Microbial Hydrogen Production from Maize Stalk Using an Isolated Strain

676

Optimization of microbial inactivation of shrimp by dense phase carbon dioxide

677

Optimization of microbiological assay of folic acid and determination of folate content in spinach

678

Optimization of Microcarrier based MDCK SIAT1 Culture System for Influenza Virus Propagation

679

Optimization of microencapsulation of seed oil by response surface methodology

680

Optimization of Microencapsulation Process for Self-Healing Polymeric Material

681

Optimization of microfiltration for seawater suffering from red-tide contamination Original Research Article

682

Optimization of micro-Laser Induced Breakdown Spectroscopy analysis and signal processing

683

Optimization of micro-Laser Induced Breakdown Spectroscopy analysis and signal processing

684

Optimization of microporous palm shell activated carbon production for flue gas desulphurization: Experimental and statistical studies

685

Optimization of microscale vortex generators in a microchannel using advanced response surface method

686

Optimization of microstructure and properties of acceptor-doped barium cerate

687

Optimization of microstructure and properties of in situ formed β-O-sialon–TiN composite

688

Optimization of microstructured hollow fiber design for membrane distillation applications using CFD modeling

689

Optimization of microtitre plate assay for the testing of biofilm formation ability in different Salmonella serotypes

690

Optimization of microvia-technology using excimer laser for build-up layer application in microelectronics

691

Optimization of microwave assisted acid extraction and characterization of pectin from saffron flower waste (Crocus sativus L.)

692

Optimization of microwave assisted extraction (MAE) of pectin from black mulberry (Morus nigra L.) pomace

693

Optimization of microwave assisted extraction of pectin from orange peel

694

Optimization of microwave assisted Maillard reaction to fabricate and evaluate corn fiber gum-chitosan IPN films

695

Optimization of microwave devices using 3-D finite elements and the design sensitivity of the frequency response

696

Optimization of microwave frying of potato slices by using Taguchi technique Original Research Article

697

Optimization of microwave preparation conditions for activated carbon from Albizia lebbeck seed pods for methylene blue dye adsorption

698

Optimization of microwave preparation conditions for activated carbon from Albizia lebbeck seed pods for methylene blue dye adsorption

699

Optimization of microwave pretreatment on wheat straw for ethanol production

700

Optimization of microwave-assisted calcium chloride pretreatment of corn stover

701

Optimization of microwave-assisted extraction and supercritical fluid extraction of carbamate pesticides in soil by experimental design methodology

702

Optimization of microwave-assisted extraction followed by solid phase micro extraction and gas chromatography-mass spectrometry detection for the assay of some semi volatile organic pollutants in sebum

703

Optimization of Microwave-Assisted Extraction of Bioactive Compounds from Veronica Persica Using Response Surface Methodology

704

Optimization of microwave-assisted extraction of cajaninstilbene acid and pinostrobin from pigeonpea leaves followed by RP-HPLC-DAD determination

705

Optimization of microwave-assisted extraction of cajaninstilbene acid and pinostrobin from pigeonpea leaves followed by RP-HPLC-DAD determination

706

Optimization of microwave-assisted extraction of carbohydrates from industrial waste of corn starch production using response surface methodology

707

Optimization of microwave-assisted extraction of cottonseed oil and evaluation of its oxidative stability and physicochemical properties

708

Optimization of microwave-assisted extraction of natural antioxidants from spent espresso coffee grounds by response surface methodology

709

Optimization of microwave-assisted extraction of natural antioxidants from spent espresso coffee grounds by response surface methodology

710

Optimization of microwave-assisted extraction of polyphenols from Myrtus communis L. leaves

711

Optimization of microwave-assisted extraction procedure for zinc and copper determination in food samples by Box-Behnken design

712

Optimization of microwave-assisted extraction procedure for zinc and copper determination in food samples by Box-Behnken design

713

Optimization of microwave-assisted FeCl3 pretreatment conditions of rice straw and utilization of Trichoderma viride and Bacillus pumilus for production of reducing sugars

714

Optimization of microwave-assisted solid-phase oligosaccharides synthesis reaction and analysis of components and structure of synthetic product

715

Optimization of microwave-assisted solvent extraction for volatile organic acids in tobacco and its comparison with conventional extraction methods Original Research Article

716

Optimization of microwave-assisted transesterification of dry algal biomass using response surface methodology

717

Optimization of microwave-convective drying of Oyster mushrooms (Pleurotus ostreatus) using response-surface methodology

718

Optimization of microwave-enhanced methanolysis of algal biomass to biodiesel under temperature controlled conditions

719

Optimization of microwave-induced chemical etching for rapid development of neutron-induced recoil tracks in CR-39 detectors

720

Optimization of microwave-induced chemical etching for rapid development of neutron-induced recoil tracks in CR-39 detectors

721

Optimization of microwave–infrared roasting of hazelnut Original Research Article

722

OPTIMIZATION OF MILK TYPE AND PHYSICAL FACTORS FOR REDUCTION OF ALCOHOL CONTENT IN KEFIR

723

Optimization of milk-clotting enzyme productivity by Penicillium oxalicum

724

Optimization of millimeter wave system in ITER Equatorial EC H&CD Launcher

725

Optimization of milling parameters for the mechanosynthesis of nanocrystalline hydroxyapatite

726

Optimization of milling parameters, processing and characterization of nano-crystalline oxide dispersion strengthened ferritic steel

727

Optimization of mineral carbonation process for CO2 sequestration by lime-rich coal ashes

728

Optimization of Minimum Quantity Lubricant Parameters in Turning for the Minimization of Cutting Zone Temperature

729

Optimization of Minimum Spanning Tree and Traveling Salesman Problems Arising in a University Campus Network

730

Optimization of missions to Mars for robotic and manned spacecraft Original Research Article

731

Optimization of mix proportions of mineral aggregates using Box Behnken design of experiments

732

Optimization of Mixed Conducting Properties of Y2O3–ZrO2–TiO2 and Sc2O3–Y2O3–ZrO2–TiO2 Solid Solutions as Potential SOFC Anode Materials

733

Optimization of Mixed-Integer Non-Linear Electricity Generation Expansion Planning Problem Based on Newly Improved Gravitational Search Algorithm

734

Optimization of Mixed-Integer Non-Linear Electricity Generation Expansion Planning Problem Based on Newly Improved Gravitational Search Algorithm.

735

Optimization of mixed-mode and indirect-mode natural convection solar dryers

736

Optimization of mixed-skill multi-line operator allocation problem

737

Optimization of mixing parameters through a water model for metal matrix composites synthesis

738

Optimization of Mobile Phase of High Performance Liquid Chromatography Using Full Factorial Design for Simultaneous Estimation of Thiocolchicoside and Dexketoprofen Trometamol in Tablets

739

Optimization of modified carbon paste electrode with multiwalled carbon nanotube/ionic liquid/cauliflower-like gold nanostructures for simultaneous determination of ascorbic acid, dopamine and uric acid

740

Optimization of Modified Fenton (FeGAC/H2O2) Pretreatment of Antibiotics

741

Optimization of modular granular neural networks using hierarchical genetic algorithms for human recognition using the ear biometric measure

742

Optimization of modular granular neural networks using hierarchical genetic algorithms for human recognition using the ear biometric measure

743

Optimization of modular structures using Particle Swarm Optimization

744

Optimization of module, shaft diameter and rolling bearing for spur gear through genetic algorithm

745

Optimization of molding sand composition for quality improvement of iron castings

746

Optimization of molecular cavities in the PCM of neutral molecules using charge dependent atomic radii: applications to the semi-empirical AM1 and MNDO/PM3 methods

747

Optimization of molecular hydrogen production by Rhodobacter sphaeroides O.U.001 in the annular photobioreactor using response surface methodology

748

Optimization of Molecular Sex Identification in Ostrich Based on Multiplex PCR

749

Optimization of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine hybrid system for distributed power generation

750

Optimization of Monacolin Production in a Controlled System

751

Optimization of Monascus Pigment Production on Date Waste Substrates Using Solid State Fermentation

752

Optimization of mono- and anti-symmetrical I-sections of cold-formed thin-walled beams

753

Optimization of monoclonal antibody purification by ion-exchange chromatography: Application of simple methods with linear gradient elution experimental data

754

Optimization of monolithic charged-particle sensor arrays

755

Optimization of monolithic charged-particle sensor arrays

756

Optimization of monolithic enzymatic membranes activity as a function of their composition using design of experiments (DOE) Original Research Article

757

Optimization of monomethoxy poly(ethylene glycol) grafting on Langerhans islets capsule using response surface method

758

Optimization of monosaccharide recovery by post-hydrolysis of the water-soluble hemicellulose component after steam explosion of softwood chips

759

Optimization of morphology and geometry of encapsulated Hypophthalmichthys molitrix oil

760

OPTIMIZATION OF MOTOR VEHICLE INDUSTRIES WASTEWATER TREATMENT METHODS WITH THE AIM OF HEAVY METALS REMOVAL AND WATER REUSE IN PILOT SCALE

761

Optimization of Moving Wingin Ground Effect using Response Surface Method

762

Optimization of MOX enrichment distributions in typical LWR assemblies using a simplex method-based algorithm

763

Optimization of MPEG-2 SNR scaleable codecs

764

Optimization of MR diffusion-weighted imaging acquisitions for pancreatic cancer at 3.0 T

765

Optimization of MRS media components using response surface methodology for the riboflavin production by Lactobacillus fermentum isolated from yoghurt sample

766

Optimization of MTBE synthesis in a fixed-bed reactor system

767

OPTIMIZATION OF MULTI PERIOD - MULTI LOCATION CONSTRUCTION PROJECTS CONSIDERING RESOURCE POOL an‎d BATCH ORDERING

768

Optimization of multicollector isotope-ratio measurement of strontium and neodymium

769

Optimization of multi-echelon repairable item inventory systems with simultaneous location of repair facilities

770

Optimization of Multi-Effect Evaporation desalination plants Original Research Article

771

Optimization of multi-epitopic HIV-1 recombinant protein expression in prokaryote system and conjugation to mouse DEC-205 monoclonal antibody: implication for in-vivo targeted delivery of dendritic cells

772

Optimization of multi-feeder (depot) printed circuit board manufacturing with error guarantees

773

Optimization of multifunction multi-source solar systems by design of experiments

774

Optimization of multilaminated structures using higher-order deformation models Original Research Article

775

Optimization of multilayer fuel assemblies for supercritical water-cooled reactors with mixed neutron spectrum

776

Optimization of Multilayered Composite Structures with Randomly Distributed Mechanical Properties

777

Optimization of multi-layered metallic shield

778

Optimization of multimodal continuous functions using a new crossover for the real-coded genetic algorithms

779

Optimization of multi-pass face-milling via harmony search algorithm

780

Optimization of Multi-period Three-echelon Citrus Supply Chain Problem

781

Optimization of multiple edge barriers with genetic algorithms coupled with a Nelder–Mead local search

782

Optimization of multiple input–output fuzzy membership functions using clonal selection algorithm

783

Optimization of multiple objective gate assignments

784

Optimization of multiple performance characteristics in turning using Taguchi’s quality loss function: An experimental investigation

785

Optimization of multiple quality characteristics for CNC turning under cryogenic cutting environment using desirability function

786

Optimization of multiple quality responses involving qualitative and quantitative characteristics in IC manufacturing using neural networks

787

Optimization of multiple reaction monitoring mode for the trace analysis of veterinary sulfonamides by LC–MS/MS

788

Optimization of Multiple Reservoir Networks for Sedimentation Control

789

Optimization of Multiple Reservoir Networks for Sedimentation Control

790

Optimization of multiple responses considering both location and dispersion effects

791

Optimization of Multiple Responses of Ultrasonic Machining (USM) Process: A Comparative Study

792

Optimization of multiple shoot induction and plant regeneration in Indian barley (Hordeum vulgare) cultivars using mature embryos

793

Optimization of multiple transmission layouts for minimal energy consumption of a battery electric vehicle

794

Optimization of multiple-impulse minimum-time rendezvous with impulse constraints using a hybrid genetic algorithm

795

Optimization of multiple-layer microperforated panels by simulated annealing

796

Optimization of multiplex PCR conditions for rapid detection of Escherichia coli O157:H7 virulence genes

797

Optimization of multiplex RT-PCR for M1, M23, and M23X splice variants of AQP4 and β-actin transcripts in Dalton’s lymphoma mouse tissues

798

Optimization of multi-product, multi-period closed loop supply chain under uncertainty in product return rate: case study in Kalleh dairy company

799

Optimization of multi-response dynamic systems using principal component analysis (PCA)-based utility theory approach

800

Optimization of multi-response problems with continuous functional responses by considering dispersion effects

801

Optimization of multistage flash desalination process by using a two-level factorial design

802

Optimization of Multi-Threshold Circuits

803

Optimization of multivariate analysis for IACT stereoscopic systems

804

Optimization of municipal solid waste management in Port Said – Egypt

805

Optimization of mutual information for multiresolution image registration

806

Optimization of Nafion content in Nafion–polyaniline nano-composite modified cathodes for PEMFC application

807

Optimization of Nanocrystals NaX Zeolite Synthesis with Different Silica Sources

808

Optimization of nano-emulsions prepared by low-energy emulsification methods at constant temperature using a factorial design study

809

Optimization of nanofluid volumetric receivers for solar thermal energy conversion

810

Optimization of nanostructured lipid carriers for lutein delivery

811

Optimization of nanostructured titania photoanodes for dye-sensitized solar cells: Study and experimentation of TiCl4 treatment

812

Optimization of Naphtha Hydro-Threating Unit with Continuous Resuscitation Due to the Optimum Temperature of Octanizer Unit Reactors

813

Optimization of narirutin extraction during washing step of the pectin production from citrus peels Original Research Article

814

Optimization of native agar extraction from Hydropuntia cornea from Yucatán, México

815

Optimization of Natural Rhenium Irradiation Time to Produce Compositional Radiopharmaceutical

816

Optimization of natural-convection, solar drying systems

817

Optimization of NaY zeolite membrane preparation for the separation of methanol/methyl methacrylate mixtures Original Research Article

818

Optimization of Nd:YAG laser welding onto magnesium alloy via Taguchi analysis

819

Optimization of Nd:YAG laser welding parameters for sealing small titanium tube ends

820

Optimization of Nebhana Reservoir Water Allocation by Stochastic Dynamic Programming

821

Optimization of needle roller bearing design using novel hybrid methods

822

Optimization of neem methyl ester from transesterification process and fuel characterization as a diesel substitute

823

Optimization of network structure to random failures

824

Optimization of neural network for ionic conductivity of nanocomposite solid polymer electrolyte system (PEO–LiPF6–EC–CNT)

825

Optimization of Neural Networks by SIMPLEX Method Performed on Environmental Data

826

Optimization of neural networks: A comparative analysis of the genetic algorithm and simulated annealing

827

Optimization of neutron imaging plate

828

Optimization of neutron imaging plate

829

Optimization of neutron monitor data correction algorithms

830

Optimization of neutron monitor data correction algorithms

831

Optimization of neutron tomography for rapid hydrogen concentration inspection of metal castings

832

Optimization of neutron tomography for rapid hydrogen concentration inspection of metal castings

833

Optimization of n-Hexane Reforming Using Taguchi Orthogonal Array Design

834

Optimization of Ni2+/Ni3+ ratio in layered Li(Ni,Mn,Co)O2 cathodes for better electrochemistry

835

Optimization of nickel adsorption from aqueous solution by using activated carbon prepared from waste apricot by chemical activation

836

OPTIMIZATION OF NICKEL EXTRACTION FROM LATERITIC ORE IN HYDROCHLORIC ACID SOLUTION WITH HYDROGEN PEROXIDE BY TAGUCHI METHOD

837

Optimization of Nickel Removal from Electroless Plating Industry Wastewater using Response Surface Methodology

838

Optimization of Nickel Removal Process From Zinc Sulfate Solution Using Central Composite Design of Experiments

839

Optimization of nickel tetracarbonyl generation and nickel in situ trapping within a transversely heated graphite furnace for atomic absorption spectrometry

840

Optimization of nickel-sulphate patch-test technique with Laser Doppler Perfusion Scanning Technique (LDPST) and visual assessment

841

Optimization of NiMo catalyst for hydrogen production in microbial electrolysis cells

842

Optimization of Nitrate Reduction by Electrocoagulation Using Response Surface Methodology

843

Optimization of nitrate removal from aqueous solutions using clinoptilolite /CoFe2O4 by surface response methodology

844

Optimization of nitric acid-mediated extraction of pectin from cacao pod husks (Theobroma cacao L.) using response surface methodology

845

Optimization of nitrogen and phosphorus removal from meat processing wastewaters using microalgal biofilms

846

Optimization of nitrogen for enhanced citric acid productivity by a 2-deoxy D-glucose resistant culture of Aspergillus niger NGd-280

847

Optimization of nitrogen sources for heterotrophic production of eicosapentaenoic acid by the diatom Nitzschia laevis

848

Optimization of nitrogenated amorphous carbon films deposited by dual ion beam sputtering

849

Optimization of nitrogenated amorphous carbon films deposited by dual ion beam sputtering

850

Optimization of non-aqueous nickel slips for manufacture of MCFC electrodes by tape casting method

851

Optimization of non-evacuated receiver of solar collector having non-uniform temperature distribution for minimum heat loss

852

Optimization of nonlinear error for weighted essentially non-oscillatory methods in direct numerical simulations of compressible turbulence

853

Optimization of non-linear gravity models through generalized simulated annealing

854

Optimization of nonlinear optical rectification coefficient in asymmetric double quantum wells

855

Optimization of Nonlinear Signal Constellations for Real-World MIMO Channels

856

Optimization of non-oxidative carbon-removal techniques by nitrogen-containing plasmas

857

Optimization of Non-Stick Insect Repellent Cream Formulation

858

Optimization of non-symmetric convective–radiative annular fins by differential quadrature method

859

Optimization of non-uniformly distributed multiple tuned mass damper

860

Optimization of Non-volatile Memory Cell and Energy Consumption in Robot Systems by Synthesized Silicon Nanoparticles via Electrical Discharge

861

Optimization of non-woven spacers by CFD and validation by experiments Original Research Article

862

Optimization of normal-phase chromatographic separation of compounds with primary, secondary and tertiary amino groups

863

Optimization of novel combi-molecules: Identification of balanced and mixed bcr-abl/DNA targeting properties

864

Optimization of NOx Emission from Soya Biodiesel Fuelled Diesel Engine using Cetane Improver (DTBP)

865

Optimization of number of collectors for integrated PV/T hybrid active solar still

866

Optimization of Nusselt Number of Al2O3/Water Nanofluid Using Response Surface Methodology

867

Optimization of nutrient component for diesel oil degradation by Acinetobacter beijerinckii ZRS

868

Optimization of nutrient component for diesel oil degradation by Rhodococcus erythropolis

869

Optimization of nutrient feed concentration and addition time for production of poly(β-hydroxybutyrate)

870

Optimization of nutrient medium containing agricultural wastes for xylanase production by Aspergillus niger B03 using optimal composite experimental design

871

Optimization of nutrient-induced germination of Bacillus sporothermodurans spores using response surface methodology Original Research Article

872

Optimization of nutrients for gellan gum production by Sphingomonas paucimobilis ATCC-31461 in molasses based medium using response surface methodology

873

Optimization of nutritional composition and fermentation conditions for cellulase and pectinase production by Aspergillus oryzae using response surface methodology

874

Optimization of nutritional requirements and feeding strategies for clavulanic acid production by Streptomyces clavuligerus

875

Optimization of OCM reactions over NaWMn/SiO2 catalyst at elevated pressure using artificial neural network and response surface methodology

876

Optimization of office building window lighting in Ahvaz

877

Optimization of Oil Palm Fronds Conversion to Levulinic Acid using Fe/HY Zeolite Catalyst

878

Optimization of Oil Palm Fronds Pretreatment Using Ionic Liquid for Levulinic Acid Production

879

Optimization of oil production under gas coning conditions

880

Optimization of oil-containing wastewater treatment processes

881

Optimization of oleic acid esterification catalyzed by ionic liquid for green biodiesel synthesis

882

Optimization of Oleuropein Extraction from Olive Leaves using Artificial Neural Network

883

Optimization of Oleuropein Extraction from Organic Extracts Using a Microfluidic Device and Response Surface Methodology

884

Optimization of olive leaf extract obtained by ultrasound-assisted extraction with response surface methodology

885

Optimization of olive leaf extract obtained by ultrasound-assisted extraction with response surface methodology

886

Optimization of omethoate degradation conditions and a kinetics model

887

Optimization of on-line microwave flow injection analysis system by artificial neural networks for the determination of ruthenium

888

Optimization of on-line microwave flow injection analysis system by artificial neural networks for the determination of ruthenium Original Research Article

889

Optimization of on-line solid phase extraction and HPLC conditions using response surface methodology for determination of WM-5 in mouse plasma and its application to pharmacokinetic study

890

OPTIMIZATION OF OPEN CANAL CROSS SECTIONS BY DIFFERENTIAL EVOLUTION ALGORITHM

891

Optimization of open cross section of the thin-walled beam with flat web and circular flange

892

Optimization of open die forging of round shapes using FEM analysis

893

OPTIMIZATION OF OPENING SIZE FOR CASTELLATED BEAM WITH SINUSOIDAL OPENINGS

894

Optimization of operating conditions for a continuous membrane distillation crystallization process with zero salty water discharge

895

Optimization of Operating Conditions for CO Hydrogenation to Hydrocarbon via Response Surface Method

896

Optimization of operating conditions for compressor performance by means of neural network inverse

897

Optimization of operating conditions for glucose oxidation in an enzymatic membrane bioreactor

898

Optimization of operating conditions for steam turbine using an artificial neural network inverse

899

Optimization of operating conditions for the determination of perchlorate in biological samples using preconcentration/preelution ion chromatography

900

Optimization of operating conditions of a cooling tunnel for production of hard candies Original Research Article

901

Optimization of operating conditions of axially and radially viewed plasmas for the determination of trace element concentrations from ultrasound-assisted digests of soil samples contaminated by lead pellets Original Research Article

902

Optimization of operating conditions of rosemary essential oil extraction by a fast controlled pressure drop process using response surface methodology Original Research Article

903

Optimization of Operating Conditions of Third Harmonic Ground-Fault Protection System of Generator-Transformer Unit With Two-States Transverse Parameters

904

Optimization of operating parameters affecting the removal of chromium from aqueous solution using bio absorption Jujube fruit powder, Jujube fruit charcoal and compression with Granular Activated Car

905

Optimization of operating parameters for coarse sphalerite flotation in the HydroFloat fluidised-bed separator

906

Optimization of operating parameters for inductively coupled plasma mass spectrometry: A computational study

907

Optimization of operating parameters for inductively coupled plasma mass spectrometry: A computational study

908

Optimization of operating parameters for liquid-cooled PEM fuel cell stacks using Taguchi method

909

Optimization of operating parameters for sludge process reduction under alternating aerobic/oxygen-limited conditions by response surface methodology

910

Optimization of operating parameters for supercritical carbon dioxide extraction of lycopene by response surface methodology Original Research Article

911

Optimization of Operating Parameters in the Removal of Synthetic Textile Dyestuff with the Electrocoagulation Process

912

Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II

913

Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept

914

Optimization of operating schedule of machines in granite industry using evolutionary algorithms

915

Optimization of operating temperature in cryocooled HTS magnets for compactness and efficiency Original Research Article

916

Optimization of operation and maintenance of nuclear power plant by probabilistic fracture mechanics Original Research Article

917

Optimization of operation mode for the concentration by NF of clarified fermentation broths Original Research Article

918

Optimization of operation parameters of refrigeration cycle using particle swarm and NLP techniques

919

Optimization of operational and design parameters of plane reflector-tilted flat plate solar collector systems

920

Optimization of operational conditions for biodegradation of chlorophenols by laccase-polyacrilonitrile beads system

921

OPTIMIZATION OF OPERATIONAL PARAMETERS FOR DECOLORIZATION AND DEGRADATION OF C. I. REACTIVE BLUE 29 BY OZONE

922

Optimization of Operational Parameters in Rhamnolipid Production by Pseudomonas aeruginosa MM1011 in a Miniaturized Shaken Bioreactor

923

Optimization of Operations in Supply Chain Systems Using Hybrid Systems Approach and Model Predictive Control

924

Optimization of optical cross-connects with wave-mixing conversion

925

Optimization of optical filters for ITER edge Thomson scattering diagnostics

926

Optimization of optical klystron for coherent harmonic generation FEL

927

Optimization of optical klystron for coherent harmonic generation FEL

928

Optimization of optical lens-controlled scanning electron microscopic resolution using generalized regression neural network and genetic algorithm

929

Optimization of order policies in supply networks

930

Optimization of Order Quantity for Multi-Product from Multi-Supplier with Discounted Prices

931

Optimization of order-up-to-S policies for two-level inventory systems with compound Poisson demand

932

Optimization of organic and conventional olive agricultural practices from a Life Cycle Assessment and Life Cycle Costing perspectives

933

Optimization of organic compounds removal from Wastewater by Electrocoagulation

934

Optimization of organic light-emitting diode containing hydrochlorosilole electron transport layer through impedance spectroscopy analysis

935

Optimization of organic solar cells with thin film Au as anode

936

Optimization of organosolv pretreatment of starch waste from sugar palm trunk (Arenga pinnata) for the production of reducing sugar

937

Optimization of orientation for higher yield of solar still for a given location

938

Optimization of Orius majusculus release: photoperiodic sensitivity at different temperatures and storage of diapausing adults

939

Optimization of Orthogonal Polyphase Coding Waveform for MIMO Radar based on Evolutionary Algorithms

940

Optimization of Oscillation Model for Slab Continuous Casting Mould Based on Mould Friction Measurements in Plant Trial Original Research Article

941

Optimization of osmotic dehydration of bananas followed by air-drying

942

Optimization of osmotic dehydration of cantaloupe using desired function methodology Original Research Article

943

OPTIMIZATION OF OSMOTIC DEHYDRATION OF HONEYDEW USING RESPONCE SURFACE METHODOLOGY

944

Optimization of osmotic dehydration of potato using response surface methodology Original Research Article

945

Optimization of osmotic dehydration of tomatoes in a ternary system followed by air-drying Original Research Article

946

Optimization of osmotic dehydration of yam bean (Pachyrhizus erosus) using an orthogonal experimental design Original Research Article

947

Optimization of Outfall Systems in RO Desalination Plants (Case study: Bandar Abbas Desalination)

948

Optimization of oven toasting for improving crispness and other quality attributes of ready to eat potato-soy snack using response surface methodology Original Research Article

949

Optimization of oversized waveguide components using a genetic algorithm

950

Optimization of Oxidation Pond Efficiency in Animal Farm Wastewater Treatment

951

Optimization of oxidative bioconversions catalyzed by phenylacetone monooxygenase from Thermobifida fusca

952

Optimization of oxidative desulfurization of dibenzothiophene using acidic ionic liquid as catalytic solvent

953

Optimization of oxidative desulfurization of thiophene using Cu/titanium silicate-1 by box-behnken design

954

Optimization of ozone and coagulation processes for bromate control in Istanbul drinking waters Original Research Article

955

Optimization of ozone treatment of fresh-cut green leaf lettuce Original Research Article

956

Optimization of p/n multilayer structure for organic photoreceptor device

957

Optimization of pack parameters for hot deformation of TiAl alloys

958

Optimization of PACl dose to reduce RO cleaning in an IMS Original Research Article

959

Optimization of palm kernel shell torrefaction to produce energy densified bio-coal

960

Optimization of parabolic trough solar collectors integrated with two stage Rankine cycle

961

Optimization of parallel machine scheduling problem with human resiliency engineering: A new hybrid meta-heuristics approach

962

Optimization of parameter settings to achieve improved moisture absorption properties of Bamboo fibre composites

963

Optimization of parameter settings to achieve improved tensile and impact strength of bamboo fibre composites

964

Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching

965

Optimization of parameters affecting separation of gas mixture of O2, N2, CO2 and CH4 by PMP membrane modified with TiO2, ZnO and Al2O3 nanoparticles

966

Optimization of parameters and adsorption mechanism of thiabendazole fungicide by a montmorillonite of North Patagonia, Argentina

967

Optimization of parameters for adsorption of metal ions onto rice husk ash using Taguchi’s experimental design methodology

968

Optimization of parameters for adsorption of metal ions onto rice husk ash using Taguchiʹs experimental design methodology

969

Optimization of parameters for an aluminum melting furnace using the Taguchi approach

970

Optimization of parameters for anaerobic co-metabolic degradation of TBBPA

971

Optimization of parameters for curve interpolation by cubic splines

972

Optimization of parameters for deposition of Ga-doped ZnO films by DC reactive magnetron sputtering using Taguchi method

973

Optimization of Parameters for Separation of the Medium Rare Earth Element Group from Other Rare Earth Elements by Precipitation Method Using Box- Behken Design

974

Optimization of parameters for silicon planar source of modulated infrared radiation

975

Optimization of parameters for the analysis of aromatic amines in finger-paints

976

Optimization of parameters for the fabrication of gelatin nanoparticles by the Taguchi robust design method

977

Optimization of Parameters for the Friction Stir Processing and Welding of AA1050 Aluminum Alloy

978

Optimization of parameters for the supercritical fluid extraction in the determination of N-nitrosamines in rubbers

979

Optimization of parameters for the synthesis of bimodal Ag nanoparticles by Taguchi method

980

Optimization of parameters for the synthesis of zinc oxide nanoparticles by Taguchi robust design method

981

Optimization of parameters in 16-slice CT-scan protocols for reduction of the absorbed dose

982

Optimization of parameters of high-performance displacement chromatography for separation of soybean phosphatidylcholine and phosphatidylethanolamine

983

Optimization of parameters used for freshwater survey

984

Optimization of parametric performance of a PEMFC

985

Optimization of partial constrained layer damping treatment for vibrational energy minimization of vibrating beams

986

Optimization of partial interaction in bolted side-plated reinforced concrete beams

987

Optimization of partial nitritation in a continuous flow internal loop airlift reactor

988

Optimization of Particle Dimensions for High Efficiency in Capillary Electrochromatography

989

Optimization of Pass Schedule in Hot Strip Rolling Original Research Article

990

Optimization of passivation layers for corrosion protection of silicon-based microelectrode arrays

991

Optimization of passive design measures for residential buildings in different Chinese areas

992

Optimization of passive solar design strategies: A review

993

Optimization of passively damped composite structures

994

Optimization of Pasta Formulation Containing Wheat, Quinoa Flour and Purslane Leaves Powder

995

Optimization of Pb(II) Adsorption onto Australian Pine Cones-Based Activated Carbon by Pulsed Microwave Heating Activation

996

Optimization of Pb(II) biosorption by Robinia tree leaves using statistical design of experiments

997

Optimization of PCR protocol in microsatellite analysis with silver and SYBR® stains

998

Optimization of PCR-based methods for rapid detection of Campylobacter jejuni, Campylobacter coli and Yersinia enterocolitica serovar 0:3 in wastewater samples

999

Optimization of peak power of passively Q-switched lasers by taking into account intracavity laser spatial distribution

1000

Optimization of pectin extraction assisted by microwave from apple pomace using response surface methodology Original Research Article

بازگشت