Title List مقالات لاتين INFLUENCE OF SOME POLLEN SUBSTITUTES ON BROOD REARING OF HONEY BEE AND WORKERS LONGEVITY El-Hady, A. M. E. Influence of synthesis conditions on the microstructure of Li–Ta–Ti–O microsheets by molten salt method

بر اساس عنوان

1

INFLUENCE OF SOME POLLEN SUBSTITUTES ON BROOD REARING OF HONEY BEE AND WORKERS LONGEVITY El-Hady, A. M. E.

2

Influence of some potential prebiotics and fibre-rich foodstuffs on composition and activity of canine intestinal microbiota

3

Influence of some prefermentative treatments on aroma composition and sensory evaluation of white Godello wines

4

Influence of some reactional parameters on the substitution degree of biopolymeric Schiff bases prepared from chitosan and salicylaldehyde

5

Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation

6

Influence of some selected organic molecules on intensity of luminescence of TiO2:Eu3+ electrodes

7

Influence of Some Technological Links on the Production and Quality Parameters in Castor-Oil Plants (Ricinus communis L.)

8

Influence of Some Test Parameters on Dry Sliding Wear Characteristics of a Zinc-11.5% Aluminum Alloy

9

INFLUENCE OF SOME THIN SHELL THEORIES ON THE EVALUATION OF THE NOISE LEVEL IN STIFFENED CYLINDERS

10

Influence of some transition metal cations on the properties of BaO-containing glasses and glass-ceramics

11

INFLUENCE OF SOME VARIETIES ON THE MAIN INSECT PESTS ATTACKING FABA BEAN PLANTS

12

Influence of sonotrode texture on the performance of an ultrasonic consolidation machine and the interfacial bond strength

13

Influence of sorbent characteristics on the adsorption of PAC: II. Adsorption of PAH with different numbers of rings

14

Influence of sorbents on emission of elements from fluidised bed combustion

15

Influence of Soret and Dufour on MHD buoyancy-driven heat and mass transfer over a stretching sheet in porous media with temperature-dependent viscosity

16

Influence of sorghum flour addition on flat bread in vitro starch digestibility, antioxidant capacity and consumer acceptability

17

Influence of sorghum inclusion level on performance of growing local Mukota, Large White and their F1 crossbred pigs in Zimbabwe

18

Influence of sorption area ratio and test method on formaldehyde reduction performance for sorptive building materials

19

Influence of sorption isotherm hysteresis effect on indoor climate and energy demand for heating

20

Influence of sorption kinetics for zirconia sensitization in solid oxide fuel cell functional anode prepared by electroless technique

21

Influence of sorption on removal of tryptophan and phenylalanine during nanofiltration

22

Influence of sorption on the biological utilization of two simple carbon substrates

23

Influence of sorption on the biological utilization of two simple carbon substrates

24

Influence of sorption processes by iron oxides and algae fixation on arsenic and phosphate cycle in an acidic estuary (Tinto river, Spain)

25

Influence of sorption to dissolved humic substances on transformation reactions of hydrophobic organic compounds in water. Part II: Hydrolysis reactions Original Research Article

26

Influence of sound wave characteristics on fluidization behaviors of ultrafine particles

27

Influence of source directivity on noise levels in industrial halls: Simulation and experiments

28

Influence of source distribution and geochemical composition of aerosols on children exposure in the large polymetallic mining region of the Bolivian Altiplano Original Research Article

29

Influence of source of fat and supplementation of the diet with vitamin E and C on performance and egg quality of laying hens from forty four to fifty six weeks of age

30

Influence of sources of dietary vitamin E on the maternal transfer of (alpha)-tocopherol to fetal and neonatal guinea pigs as determined by a stable isotopic technique

31

Influence of source–sensor geometry on multi-source emission rate estimates

32

Influence of Sowing Date on Emergence Characteristics of Maize Seed Coated with a Temperature-Activated Polymer

33

Influence of sowing date on phenological stages, seed growth and marketable yield of four vegetable soybean cultivars in North-eastern USA

34

Influence of Sowing Date on Yields of Fresh-harvested Chickpea

35

INFLUENCE OF SOWING DATES AND PLANTING METHODS ON WEED DYNAMICS IN WHEAT CROP

36

INFLUENCE OF SOWING ORIENTATION AND INTERCROPPING OF CHILI ON TOMATO YIELD AND ITS WEEDS

37

INFLUENCE OF SOY FLOUR IN BAKED PRODUCTS

38

Influence of soya-based infant formula consumption on isoflavone and gut microflora metabolite concentrations in urine and on faecal microflora composition and metabolic activity in infants and children

39

Influence of soybean biodiesel content on basic properties of biodiesel–diesel blends

40

Influence of soybean row width and velvetleaf emergence time on velvetleaf (Abutilon theophrasti)

41

Influence of soybean soluble polysaccharides and beet pectin on the physicochemical properties of lactoferrin-coated orange oil emulsion

42

Influence of space charge on the scale-up of multiplexed electrosprays

43

Influence of space charge related to water trees on the breakdown voltage of power cable insulation

44

Influence of space charges on the current–voltage characteristic of organic light-emitting devices

45

Influence of space debris impact on solar array under power generation

46

Influence of space flight conditions on phenotypes and function of nephritic immune cells of swordtail fish (Xiphophorus helleri) Original Research Article

47

Influence of spacer layer on InP/InGaAs δ-doped heterojunction bipolar transistors

48

Influence of spacer moiety and length of end chain for the phase stability in complementary, double hydrogen bonded liquid crystals, MA:nOBAs

49

Influence of spacer thickness on permeate flux in spiral-wound seawater reverse osmosis systems Original Research Article

50

Influence of spacers and organic modifiers on chromatographic behaviors on chiral diamide stationary phase with N-(3,5-dimethylbenzoyl)-D-phenylglycine

51

Influence of spacers and organic modifiers on chromatographic behaviors on chiral diamide stationary phase with N-(3,5-dimethylbenzoyl)-d-phenylglycine Original Research Article

52

Influence of spacing parameters on the wind loading of solar array

53

Influence of spark plasma sintering (SPS) processing parameters on microstructure and mechanical properties of nickel

54

Influence of spark plasma sintering and subsequent hot rolling on microstructure and flexural behavior of in-situ TiB and TiC reinforced Ti6Al4V composite

55

Influence of spark plasma sintering temperature on electrochemical performance of La0.80Mg0.20Ni3.75 alloy

56

Influence of Spartina and Juncus on Saltmarsh Sediments. I. Pore Water Geochemistry

57

Influence of Spartina and Juncus on saltmarsh sediments. II. Trace element geochemistry

58

Influence of Spartina and Juncus on saltmarsh sediments. III. Organic geochemistry

59

Influence of spatial and temporal variability of subsurface soil moisture and temperature on vapour intrusion

60

Influence of spatial attention on conscious and unconscious word priming

61

Influence of spatial discretization, underground water storage and glacier melt on a physically-based hydrological model of the Upper Durance River basin

62

Influence of spatial distribution of active centers on the kinetics of model heterogeneous catalytic processes

63

Influence of spatial heterogeneity and temporal variability in habitat selection: A case study on a great bustard metapopulation

64

Influence of spatial heterogeneity and temporal variability in habitat selection: A case study on a great bustard metapopulation

65

Influence of spatial heterogeneity on the type of zooplankton functional response: A study based on field observations

66

Influence of spatial interpolation methods for climate variables on the simulation of discharge and nitrate fate with SWAT

67

Influence of spatial layout on airflow field and particle distribution on the workspace of a factory

68

Influence of spatial patterns on ecological applications of extremal principles

69

Influence of spatial patterns on ecological applications of extremal principles

70

Influence of spatial structure on pathogen colonization and extinction: a test using an experimental metapopulation

71

Influence of spatial structure on the maintenance of sexual reproduction

72

Influence of spatial variability of permeability property on steady state seepage flow and slope stability analysis

73

Influence of spatial variations of microtopography and infiltration on surface runoff and field scale hydrological connectivity

74

Influence of Speaker Gender on Listener Judgments of Tracheoesophageal Speech

75

Influence of special attributes of zeotropic refrigerant mixtures on design and operation of vapour compression refrigeration and heat pump systems

76

Influence of special surfactants on the microbial degradation of mineral oils

77

Influence of speciation on tungsten toxicity Original Research Article

78

Influence of species and different varieties of mulberry trees on consumption and nutritional efficiency of the silkworm larvae bombyx mori l. Under temperate climate of egypt

79

Influence of species and preservations on the quality and safety of grass silages

80

Influence of species proportion and timing of establishment on stem quality in mixed red alder – Douglas-fir plantations

81

Influence of species/cultivar and season on the quality of Atriplex grown at different sites in South Africa

82

Influence of specific CD4+ T cells and antibodies on evolution of hypervariable region 1 during acute HCV infection

83

Influence of specific data on a research reactor probabilistic model

84

Influence of specific growth limitation on biosorption of heavy metals by Saccharomyces cerevisiae

85

Influence of specific heat capacity ratio on the optimum design of the leading edge of centrifugal compressor impeller considering the presence of IGV

86

Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves

87

Influence of specimen dimensions and their derivatives (C-factor and volume) on polymerization stress determined in a high compliance testing system

88

Influence of specimen directions on recovery behaviors from circular deformation of polyester cord-inserted rubber composites

89

Influence of specimen geometry and size-effect on the KR-curve based on the cohesive stress in concrete

90

Influence of Specimen Geometry of Hot Torsion Test on Temperature Distribution During Reheating Treatment of API-X70 Original Research Article

91

Influence of specimen geometry on adiabatic shear instability of tungsten heavy alloys

92

Influence of specimen geometry on determination of double-K fracture parameters of concrete: a comparative study

93

Influence of specimen preparation by machining on the failure of polymer matrix off-axis tensile coupons

94

Influence of specimen size and regional variation on long-term resin–dentin bond strength

95

Influence of specimen size on the tension–tension fatigue behaviour of fibre-reinforced plastics at room temperature and at 77 K Original Research Article

96

Influence of specimen size, tray inclination and air flow rate on the emission of gases from biomass combustion

97

Influence of Specimen Size/Geometry on Shrinkage Cracking of Rings

98

Influence of specimen thickness and projectile material on crater and spalling of an electrode-grade graphite by the impact of a projectile

99

Influence of specimen thickness with rectangular cross-section on the tensile properties of structural steels

100

Influence of specimen width on the deformation and fracture behaviour of AA5182 sheets

101

Influence of Specimen-Reconstituting Method on the Undrained Response of Sand

102

Influence of Specimen-Reconstituting Method on the Undrained Response of Sand

103

Influence of spectator ions on the reactivity of divalent metal salts in molten alkali metal nitrates: Morphology of the resulting metal oxides

104

Influence of spectral heterogeneity of prodan and laurdan solutions on the transfer of electronic energy to octadecyl rhodamine B Original Research Article

105

Influence of spectrum loading sequences on fatigue life in a high-temperature environment

106

Influence of speed and frequency towards the automotive turbocharger turbine performance under pulsating flow conditions

107

Influence of spelt bran on the physical properties of WPI composite films Original Research Article

108

Influence of spent brewer’s yeast β-glucan on gelatinization and retrogradation of rice starch

109

Influence of spent catalyst used for catalytic cracking in a fluidized bed on sulphate corrosion of cement mortars: I. Na2SO4 medium

110

Influence of Spent-Engine Oil on Hematology, Renal and Liver Status of Auto- Mechanics of Benin-City, Nigeria

111

Influence of sperm concentration on the motility, morphology, membrane and DNA integrity along with oxidative stress parameters of ram sperm during liquid storage

112

Influence of sperm motility factors on spermatozoa obtained from different epididymal segments

113

Influence of sperm motility factors on spermatozoa obtained from different epididymal segments

114

Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics

115

Influence of spike current in different shaped waveforms on the hardness and grain size of nickel electroforms

116

Influence of spike current in different shaped waveforms on the surface finish of nickel electroforms

117

Influence of spike lavender (Lavandula latifolia Med.) essential oil in the quality, stability and composition of soybean oil during microwave heating

118

Influence of spillovers to Australia on impacts of the International Center for Agricultural Research in the Dry Areas

119

Influence of spilt-over hydrogen on the electrical properties of H-ZSM-5 Original Research Article

120

Influence of spin configuration on the transport properties of transition metal oxide nanostructures

121

Influence of spin on the activation energies at image

122

Influence of spinal deformity on pulmonary function, arterial blood gas values, and exercise capacity in thoracic kyphoscoliosis

123

Influence of spin-glass-like phase on magnetic and electrical transport properties of reactive sputtered Al1−xFexN films

124

Influence of spinning on the rolling EHL films

125

Influence of spin-orbit interaction of two-dimensional electrons on the magnetization of nanotubes

126

Influence of spin–spin exchange on charge transfer in PANI-ES/P3DDT/PCBM composite

127

Influence of splenectomy on immunoglobulins and complement components in major thalassemia

128

Influence of splitter plate on the reverse flow in a channel

129

Influence of spontaneous percolation on apparent mass at the bottom of a Janssen granular column

130

Influence of Spore Dose and Water Volume on a Mycoherbicide′s Efficacy in Field Trials

131

Influence of spot-weld failure on crushing of thin-walled structural sections

132

Influence of spot-weld failure on crushing of thin-walled structural sections

133

Influence of spot-weld failure on crushing of thin-walled structural sections

134

INFLUENCE OF SPOUSAL COMMUNICATION ON MARITAL STABILITY: IMPLICATION FOR CONDUCIVE HOME ENVIRONMENT

135

Influence of spray granulation on the properties of wet chemically synthesized Li1.3Ti1.7Al0.3(PO4)3 (LATP) powders

136

Influence of spray parameters on the microstructure and mechanical properties of gas-tunnel plasma sprayed hydroxyapatite coatings

137

Influence of spray parameters on the particle in-flight properties and the properties of HVOF coating of WC-CoCr

138

Influence of spray-drying operating conditions on Rhamnus purshiana (Cلscara sagrada) extract powder physical properties

139

Influence of spray-drying operating conditions on sunflower oil powder qualities

140

Influence of spraying conditions on thermal and velocity properties of plasma sprayed hydroxyapatite

141

Influence of spraying parameters on the electrochemical behaviour of HVOF thermally sprayed stainless steel coatings in 3.4% NaCl

142

Influence of spring preparation date and soil water content on seedbed physical conditions of a clayey soil in Sweden

143

Influence of spring preparation date and soil water content on seedbed physical conditions of a clayey soil in Sweden

144

Influence of springtime biomass burning in South Asia on regional ozone (O3): A model based case study

145

Influence of Sprouting on Proximate and Anti-nutritional Factors of Jacbean (Canavalia ensiformis) Flour

146

Influence of sputter damage on the XPS analysis of metastable nanocomposite coatings

147

Influence of sputter deposition conditions on phase evolution in nitrogen-doped stainless steel films

148

Influence of sputter deposition parameters on the properties of tunable barium strontium titanate thin films for microwave applications

149

Influence of sputter oxygen partial pressure on photoelectrochemical performance of tungsten oxide films

150

Influence of sputter-etching of substrate on the microstructural and optical properties of ZnO films deposited by RF magnetron sputtering

151

Influence of sputtering bias on the microstructure and properties of Nb–Si–N films

152

Influence of sputtering conditions on ionic conductivity of LiPON thin films

153

Influence of sputtering conditions on the solar and luminous optical properties of amorphous LixWoy thin films

154

Influence of sputtering conditions on the structure and properties of Ti–Si–N thin films prepared by r.f.-reactive sputtering

155

Influence of sputtering parameters on electrochemical CO2 reduction in sputtered Au electrode

156

Influence of sputtering power on composition, structure and electrical properties of RF sputtered CuIn1−xGaxSe2 thin films

157

Influence of sputtering power on crystal quality and electrical properties of Sc-doped AlN film prepared by DC magnetron sputtering

158

Influence of Sr substitution on thermoelectric properties of La1−xSrxFeO3 ceramics

159

Influence of Sr/Ba ratio on the dielectric, ferroelectric and pyroelectric properties of strontium barium niobate ceramics

160

Influence of Sr-doping on the photocatalytic activities of CdS–ZnS solid solution photocatalysts

161

Influence of SrTiO3 modification on dielectric properties of Mg(Zr0.05Ti0.95)O3 ceramics at microwave frequency

162

Influence of St. Lawrence River discharge on the circulation and hydrography in Canadian Atlantic waters

163

Influence of stability and fragmentation of a worm-reef on benthic macrofauna

164

Influence of stability and seasonal canopy changes on micrometeorology within and above an orchard canopy: The CHATS experiment

165

Influence of stabilization heat treatments on microstructure, hardness and intergranular corrosion resistance of the AISI 321 stainless steel

166

Influence of stabilization treatment on low cycle fatigue behavior of Ti alloy IMI 834

167

Influence of stabilizer jets on combustion characteristics and NOx emission in a jet-stabilized combustor

168

Influence of stabilizing agents on structure and protection performance of zirconium oxide films

169

Influence of Stabilizing Cables on Seismic Response of a Multispan Cable-Stayed Bridge

170

Influence of stack geometry and resonator length on the performance of thermoacoustic engine

171

Influence of stacking fault energy and strain rate on the mechanical properties in Cu and Cu–Al–Zn alloys

172

Influence of stacking fault energy on nanostructure formation under high pressure torsion

173

Influence of stacking fault energy on the mechanical properties in cold-rolling Cu and Cu–Ge alloys

174

Influence of stacking fault energy on the minimum grain size achieved in severe plastic deformation

175

Influence of stacking sequence on leakage characteristics through CFRP composite laminates

176

Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloys Original Research Article

177

Influence of stage of lactation and season on thyroid hormones and milk yield of Holstein cows

178

Influence of stage of maturation of bovine oocytes at time of vitrification on the incidence of diploid metaphase II at completion of maturation

179

Influence of staged-air flow on flow characteristics in a scale model of a down-fired utility boiler with swirl burners: An experimental study

180

Influence of stain etching on low minority carrier lifetime areas of multicrystalline silicon for solar cells

181

Influence of stainless steel substrate preheating on surface topography and on millimeter- and micrometer-sized splat formation

182

Influence of staircase ventilation state on the airflow and heat transfer of the heated room on the middle floor of high rise building

183

Influence of stall finishing duration of Italian Merino lambs raised on pasture on intramuscular fatty acid composition

184

Influence of stand age on the magnitude and seasonality of carbon fluxes in Canadian forests

185

Influence of stand size and quality of tree hollows on saproxylic beetles in Sweden Original Research Article

186

Influence of standard corneal cross-linking in keratoconus patients on macular profile

187

Influence of standardized histopathological workup on reporting of the resection margin status in pancreatic head cancer

188

Influence of standoff distance on the structure and properties of carbon coatings deposited by atmospheric plasma jet

189

Influence of Staphylococcus aureus Mastitis on Milk Composition of Different Dairy Breeds of Cattle in Khartoum State, Sudan

190

INFLUENCE OF STARCH ADDING ON THE MEAT COMPOSITIONS VISCOSITY

191

Influence of starch pretreatment on yield of cyclodextrins and performance of ultrafiltration membranes Original Research Article

192

Influence of starch sodium octenyl succinate on rheological behaviour of wheat flour dough systems

193

Influence of Starch Sources in Prepartum Diet on Colostrum Quality and Blood Immunoglobulin Concentration of Calves

194

Influence of starter cultures and sugar concentrations on biogenic amine contents in chorizo dry sausage Original Research Article

195

Influence of starter cultures on the antioxidant activity of kombucha beverage

196

Influence of Starter Fertilizer and Calcium Nitrate Rates on Vegetative Growth, Yield and Nutrational Quality of Cabbage

197

Influence of starting material composition and carbon content on the preparation of Mg-α SiAlON powders by carbothermal reduction-nitridation

198

Influence of starting material on the early age hydration kinetics, microstructure and composition of binding gel in alkali activated binder systems

199

Influence of starting materials on the reaction sintering of mullite–ZrO2 composites

200

Influence of starting materials on the reaction sintering of mullite–ZrO2 composites

201

Influence of starting powder on the microstructure of WC–Co hardmetals obtained by spark plasma sintering

202

Influence of starting precursors and synthesis methods on the physiochemical properties of zirconia

203

Influence of start-up on PCDD/F emission of incinerators Original Research Article

204

Influence of starvation time on formation and stability of aerobic granules in sequencing batch reactors

205

Influence of state hybridization on low-temperature electron transport in shallow quantum wells

206

Influence of state of Nb on recrystallization temperature during annealing in cold-rolled low-carbon steels

207

Influence of state support on water desalination in Spain Original Research Article

208

Influence of static and dynamic disorder on the anisotropy of emission in the ring antenna subunits of purple bacteria photosynthetic systems Original Research Article

209

Influence of static and dynamical structural changes on ultrafast processes mediated by conical intersections

210

Influence of static magnetic field on cadmium toxicity: Study of oxidative stress and DNA damage in rat tissues

211

Influence of static magnetic fields on chirally autocatalytic radical-pair reactions

212

Influence of static stress on damping behavior in Fe–15Cr and Fe–8Al ferromagnetic alloys

213

Influence of statin therapy on circadian variation of acute myocardial infarction

214

Influence of stationary phase solvation on shape selectivity and retention in reversed-phase liquid chromatography

215

Influence of statistical and constraint loss size effects on cleavage fracture toughness in the transition – A model based analysis

216

Influence of statistical and constraint loss size effects on cleavage fracture toughness in the transition—A single variable experiment and database

217

Influence of statistical errors on damage detection based on structural flexibility and mode shape curvature

218

Influence of statistical size effects on the plastic deformation of coronary stents

219

Influence of stator geometry upon vibratory behaviour and electromagnetic performances of switched reluctance motors

220

Influence of stator structure on electromechanical parameters of torus-type brushless DC motor

221

Influence of steady background gradients on the accuracy of molecular diffusion anisotropy measurements

222

Influence of Steam Activation on Pore Structure and Acidity of Zeolite Beta: An Al K Edge XANES Study of Aluminum Coordination

223

Influence of steam and carbon dioxide on the hydrogen flux through thin Pd/Ag and Pd membranes

224

Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials

225

Influence of steam dilution on the combustion of natural gas and hydrogen in premixed and rich-quench-lean combustors

226

Influence of steam explosion on physicochemical properties and hydrolysis rate of pure cellulose fibers

227

Influence of steam on gasification of millimetric wood particles in a drop tube reactor: Experiments and modelling

228

Influence of steam sterilisation on soil chemical characteristics, trace metals and clay mineralogy

229

Influence of steaming explosion time on the physic-chemical properties of cellulose from Lespedeza stalks (Lespedeza crytobotrya)

230

Influence of steaming on surface roughness of beech and sapele flooring material

231

Influence of steaming on the acidity and the methanol conversion reaction of HZSM-5 zeolite

232

Influence of steaming treatment on chemical and technological characteristics of einkorn (Triticum monococcum L. ssp. monococcum) wholemeal flour

233

Influence of Steel Fiber on the Shear Strength of a Concrete Beam

234

Influence of Steel Fibers in Fatigue Resistance of Concrete in Direct Compression

235

Influence of steel fibers on the development of alkali-aggregate reaction

236

Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete

237

Influence of steel heat treatment on ultrasonic absorption measured by laser ultrasonics

238

Influence of steel heat treatment on ultrasonic absorption measured by laser ultrasonics

239

Influence of steel reinforcements on the behavior of compressed high strength R.C. circular columns

240

Influence of Steel Slag Aggregate Gradation on the Improvement of Concrete Properties

241

Influence of steel slag on mechanical properties and durability of concrete

242

Influence of steel strength on the fatigue reliability of welded structural components

243

Influence of steel type on electrical discharge machined surface integrity

244

Influence of steep gradient supporting walls in rock climbing: biomechanical analysis

245

INFLUENCE OF STEM CUTTING POSITION, LEAVES CONDITION AND SIZE OF MINICUTTINGS IN ROOTING OF BLACK WATTLE

246

Influence of stenosis morphology on flow through severely stenotic vessels: implications for plaque rupture

247

Influence of stenotic lesion morphology on immediate and long-term (6 months) angiographic outcome: Comparative analysis of directional coronary atherectomy versus standard balloon angioplasty

248

Influence of Stent Length to Lesion Length Ratio on Angiographic and Clinical Outcomes After Implantation of Bare Metal and Drug-Eluting Stents (the TAXUS-IV Study)

249

Influence of step complexity and presentation style on step performance of computerized emergency operating procedures

250

Influence of step complexity and presentation style on step performance of computerized emergency operating procedures

251

Influence of step edge diffusion on surface morphology during epitaxy

252

Influence of step geometry and orientation on the growth of adsorbates

253

Influence of step increases in hydraulic retention time on (RS)-MCPP degradation using an anaerobic membrane bioreactor

254

Influence of step sites in the molecular mechanism of the water gas shift reaction catalyzed by copper

255

Influence of step-height and body mass on gastrocnemius muscle fascicle behavior during stair ascent

256

Influence of steps on the electrochemical oxidation of CO adlayers on Pd(111) and on Pd films electrodeposited onto Au(111)

257

Influence of stereoirregularities on the formation of the γ-phase in isotactic polypropene

258

Influence of stereoisomer of dispiro-1,2,4,5-tetraoxanes on their binding mode with heme and on antimalarial activity: molecular docking studies Original Research Article

259

Influence of stereoregularity on the photoinitiated electrical conductivity of poly (3-alkylthiophenes)

260

Influence of steric and electronic factors in the stabilization of five-coordinate ethylene complexes of platinum(II): X-ray crystal structure of [PtCl2(2,9-dimethyl-1,10-phenanthroline-5,6-dione)]

261

Influence of steric parameters on the synthesis of tetramates from α-amino-β-alkoxy-esters and Ph3PCCO

262

Influence of sterically demanding groups on the structure and stability in the solid and solution state of (acylpyrazolonate)bis(phosphine)copper(I) derivatives

263

Influence of sterilization methods on cell behavior and functionality of osteoblasts cultured on TiO2 nanotubes

264

Influence of sterilization on injectable bone biomaterials

265

Influence of sterilization on the mineralization of titanium implants induced by incubation in various biological model fluids

266

Influence of sterilization processes on poly(var epsilon-caprolactone) nanospheres

267

Influence of steroid hormone progesterone on the properties of phosphatidyl serine monolayers and thin liquid films Original Research Article

268

Influence of steroid structure on the pyrolytic formation of polycyclic aromatic hydrocarbons

269

Influence of Steroidal Anti-Inflammatory Drugs on Viability and Fertility of Equine Semen

270

Influence of steroids on complement and cytokine generation after cardiopulmonary bypass

271

Influence of steroids on HCV recurrence after liver transplantation: A prospective study

272

Influence of steroids on microvascular perfusion injury of the bowel induced by extracorporeal circulation

273

Influence of stiffness and contact modelling on catenary–pantograph system dynamics

274

Influence of stiffness degradation on strength demands of structures built on soft soil sites

275

Influence of stiffness on CHF for horizontal tubes under LPLF conditions

276

Influence of Stigmatic Morphology on Flower Colonization by Erwinia amylovora and Pantoea agglomerans

277

Influence of stimulus control on the excitability of the electrically elicited blink reflex in patients with schizophrenia

278

Influence of stimulus intensity on waveform of sympathetic skin response evoked by magnetic stimulation

279

Influence of stirring in the synthesis of gold nanorods

280

Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite

281

Influence of stirring speed on the synthesis of Al/SiC based functionally gradient materials

282

Influence of stirring-induced mixing on cell proliferation and extracellular matrix deposition in meniscal cartilage constructs based on polyethylene terephthalate scaffolds

283

Influence of stirrup detailing on punching shear strength of flat slabs

284

Influence of stochastic perturbation on prey–predator systems

285

Influence of stock camping behaviour on the soil microbiological and biochemical properties of grazed pastoral soils

286

Influence of Stock on the Early Tree Growth, Yield and Fruit Quality Traits of Apricot (Prunus armeniaca L.)

287

INFLUENCE OF STOCKING DENSITY AND WATER PARAMETERS ON GROWTH OF JUVENILE BELUGA STURGEON (HUSO HUSO, LINNAEUS, 1758)

288

Influence of stoichiometry and alloying elements on the crystallography and hydrogen sorption properties of TiCr based alloys

289

Influence of stoichiometry and alloying elements on the crystallography and hydrogen sorption properties of TiCr based alloys

290

Influence of stoichiometry and heat treatment conditions on the magnetic properties and phase constitution of Ba-ferrite powders prepared by sol–gel

291

Influence of stoichiometry on phase constitution, thermal behavior and magnetic properties of Ba-hexaferrite particles prepared via SHS route

292

Influence of stoichiometry on the dielectric and ferroelectric properties of the tunable (Ba,Sr)TiO3 ceramics investigated by First Order Reversal Curves method

293

Influence of stoichiometry on the luminescent properties of InAs quantum dots grown on a image heterostructure

294

Influence of stoichiometry on the optical properties of lead tungstate crystals

295

Influence of stoichiometry on the release of atomic sodium from a burning black liquor droplet in a flat flame with and without boron

296

Influence of stomatal conductance on the efficiency of internal pressurisation in Typha domingensis

297

Influence of Stone–Wales defects on elastic properties of graphene nanofilms

298

Influence of storage and in vitro gastrointestinal digestion on total antioxidant capacity of fruit beverages

299

Influence of storage and in vitro gastrointestinal digestion on total antioxidant capacity of fruit beverages

300

Influence of storage and release on particle emissions from new and used CRTs

301

Influence of Storage Atmosphere and Temperature on Quality Evolution of Cut Belgian Endives

302

Influence of storage conditions of apples on growth and patulin production by Penicillium expansum

303

Influence of storage conditions on aroma compounds in coffee pads using static headspace GC–MS

304

INFLUENCE OF STORAGE CONDITIONS ON FLAVONOIDS CONTENT AND ANTIOXIDANT ACTIVITY OF SELECTED SHALLOT (ALLIUM CEPA VAR. ASCALONICUM BACKER) HYBRID CULTIVARS

305

Influence of storage conditions on quality and viability of high and low oleic sunflower seeds

306

Influence of storage conditions on some physical and chemical properties of smoked salmon (Salmo salar) processed by vacuum impregnation techniques

307

Influence of storage conditions on the carbonation of powdered Ca(OH)2

308

Influence of Storage Conditions on the Quality of Shelled and Roasted Almonds

309

Influence of storage conditions on the stability of monomeric anthocyanins studied by reversed-phase high-performance liquid chromatography

310

Influence of Storage of Deep Litter Manure on Ammonia Loss and Uniformity of Mass and Nutrient Distribution following Land Spreading

311

Influence of storage of plant samples on their chemical composition

312

Influence of Storage on Briquettes Mechanical Properties

313

Influence of storage on methane yields of separated pig slurry solids

314

INFLUENCE OF STORAGE ON POMOLOGICAL AND SENSORY CHARACTERISTICS OF HAZELNUT FRUIT

315

Influence of storage period and packaging method on sliced dry cured beef “Cecina de Leon”: Effects on microbiological, physicochemical and sensory quality

316

influence of storage technology on THE quality of fresh hops

317

Influence of storage temperature and duration on lipid and protein oxidation and flavour changes in frozen pork dumpling filler

318

Influence of storage temperature and freezing time on histamine level in the European anchovy Engraulis encrasicholus (L., 1758): A study by capillary electrophoresis

319

Influence of storage temperature on gene expression and virulence potential of Listeria monocytogenes strains grown in a salmon matrix Original Research Article

320

Influence of storage temperature on microbial spoilage characteristics of haddock fillets (Melanogrammus aeglefinus) evaluated by multivariate quality prediction

321

Influence of Storage Temperature on Shelf-life of Minimally Processed Cactus Pear Fruits

322

Influence of storage temperature on the volatile compounds of young white wines

323

Influence of storage time and temperature on in vitro digestion of neutral detergent fibre at 48 h, and comparison to 48 h in sacco neutral detergent fibre digestion

324

Influence of storage time at room temperature on the physicochemical properties of cassava starch films

325

Influence of storage time on bond strength of self-etching adhesive systems to artificially demineralized dentin after a papain gel chemical–mechanical agent application

326

Influence of storage time on toxicity of freshwater sediments to benthic macroinvertebrates

327

INFLUENCE OF STORE ATTRIBUTES ON SHOPPING INTENTIONS IN FACTORY OUTLET MALLS

328

Influence of store dimensions and auxiliary volume configuration on the performance of medium-sized solar combisystems

329

Influence of stored elastic strain energy on fatigue behaviour of NiTi shape memory alloy thermal actuator wire

330

Influence of stored energy on twin formation during primary recrystallization

331

Influence of storing time and temperature on the viscosity of an egg yolk Original Research Article

332

Influence of strain amplitude on damping property of aluminum foams reinforced with copper-coated carbon fibers

333

Influence of strain and buffer layer type on In incorporation during GaInN MOVPE

334

Influence of strain and buffer layer type on In incorporation during GaInN MOVPE

335

Influence of strain and cultivation procedure on the performance of simultaneous saccharification and fermentation of steam pretreated spruce

336

Influence of strain effects on hole-subband resonances in GaAsrInAlAs superlattices

337

Influence of strain estimation methods on life predictions using the local strain approach

338

Influence of strain gradients on lattice rotation in nano-indentation experiments: A numerical study

339

Influence of strain hardening on bending moment–axial force interaction

340

Influence of strain hardening on bending moment–axial force interaction

341

Influence of strain hardening on continuous plate roll-bending process

342

Influence of strain on precipitation reactions during creep of an advanced 9% chromium steel Original Research Article

343

Influence of strain on proteoglycan synthesis by valvular interstitial cells in three-dimensional culture

344

Influence of strain on space-charge distribution at ferroelectric thin-film free surfaces Original Research Article

345

Influence of strain on the atomic and electronic structure of manganite films Original Research Article

346

Influence of strain on the dielectric properties of Bi–Zn–Ti–Nb–O solid solution thin films

347

Influence of strain on the magneto-exciton in single and coupled InP/GaInP quantum disks

348

Influence of strain on the Stark effect in InP/GaInP quantum discs

349

Influence of strain on the tunneling magnetoresistance in diluted magnetic semiconductor trilayer and double barrier structures

350

Influence of strain path on the microstructure evolution and mechanical properties in AM31 magnesium alloy sheets processed by differential speed rolling

351

Influence of strain rate & temperature on the mechanical response of ultrafine-grained Cu, Ni, and Al-4Cu-0.5Zr

352

Influence of strain rate and fuel dilution on laminar nonpremixed hydrogen—Air flame structure: An experimental investigation

353

Influence of strain rate and temperature on serrated flow in 9Cr–1Mo ferritic steel

354

Influence of strain rate and temperature on tensile properties and flow behaviour of a reduced activation ferritic–martensitic steel

355

Influence of strain rate and temperature on tensile stress–strain and work hardening behaviour of 9Cr–1Mo ferritic steel

356

Influence of strain rate and water content on mechanical behavior of dam concrete

357

Influence of strain rate on buckle folding of an elasto–viscous single layer

358

Influence of strain rate on mechanical properties and deformation texture of hot-pressed and rolled beryllium

359

Influence of strain rate on the characteristics of a magnesium alloy processed by high-pressure torsion

360

Influence of strain rate on the deformation and fracture response of a 6061-T6 Al–50 vol.% Al2O3 continuous-reinforced composite

361

Influence of strain rate on the deformation and fracture response of a 6061-T6 Al–50 vol.% Al2O3 continuous-reinforced composite

362

Influence of strain rate on the mechanical properties in fine-grained aluminum alloys

363

Influence of strain rate on the mechanical properties in fine-grained aluminum alloys

364

Influence of strain rate on the microstructure of a thermo-mechanically processed medium carbon microalloyed steel

365

Influence of strain rate on the microstructure of a thermo-mechanically processed medium carbon microalloyed steel

366

Influence of strain rate on the seismic response of RC structures

367

Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium

368

Influence of strain rate on yield stress and stress anomaly in an alloy based on Fe3Al

369

Influence of strain rate on yield stress and stress anomaly in an alloy based on Fe3Al

370

Influence of strain rate, temperature and adiabatic heating on the mechanical behaviour of poly-methyl-methacrylate: Experimental and modelling analyses

371

Influence of strain rates and strain states on the formability of a superplastic 8090 aluminum alloy

372

Influence of Strain Ratio on Bending Fatigue Life and Fatigue Crack Growth in TiNi Shape-Memory Alloy Thin Wires

373

Influence of strain relaxation on the electronic properties of buried quantum wells and wires

374

Influence of strain relaxation on the electronic properties of buried quantum wells and wires

375

Influence of strain relaxation on the structural stabilization of SmNiO3 films epitaxially grown on (0 0 1) SrTiO3 substrates

376

Influence of strain state in mechanical behaviour of aluminium alloys using the Small Punch Test

377

Influence of strain/stress on the nonlinear-optical properties of sprayed deposited ZnO:Al thin films

378

Influence of straining and ageing on the room temperature mechanical properties of dual phase steel

379

Influence of strain-rate on compressive-deformation behavior of a Zr–Cu–Ni–Al bulk metallic glass at cryogenic temperature

380

Influence of strain-specific parameters on hydrothermal liquefaction of microalgae

381

Influence of Strand Number on Antiparallel β-Sheet Stability in Designed Three- and Four-stranded β-Sheets

382

Influence of stratification on decaying surface seiche modes

383

Influence of stratification on marine dissolved organic carbon (DOC) dynamics: The Mediterranean Sea case

384

Influence of stratigraphic setting and simple shear on layer-bound compaction faults offshore Mauritania

385

INFLUENCE OF STRAW ORGANICS ON CHARACTERISTICS OF SOIL FERTILITY AND BIOLOGICAL YIELD CAPACITY (BARLEY CASE STUDY)

386

Influence of straw size on activity and biomass of soil microorganisms during decomposition

387

Influence of streambank fencing with a cattle crossing on riparian health and water quality of the Lower Little Bow River in Southern Alberta, Canada

388

Influence of streaming potential on flux decline of microfiltration with in-line rapid pre-coagulation process for drinking water production

389

Influence of Streamwise Bed Slope on Sediment Threshold under Stream Flow

390

Influence of street characteristics, driver category and car performance on urban driving pattern

391

Influence of street obstructions on flow processes within urban canyons

392

Influence of street obstructions on flow processes within urban canyons

393

Influence of stress and environment on the fatigue strength and failure characteristics of case carburised low alloy steels for aerospace applications

394

Influence of stress condition on adiabatic shear localization of tungsten heavy alloys

395

Influence of stress field of expanding and contracting plate shaped precipitate on hydride embrittlement of Zr-alloys

396

Influence of stress fields of dislocations on formation and spatial stability of point defects (elastic dipoles) in V and Fe crystals

397

Influence of stress gradients on failure in contact strength tests with cylinder loading

398

Influence of Stress on DDT-Induced Humoral Immune Responsiveness in Mice

399

Influence of stress on magneto-impedance in Co71−xFexCr7Si8B14 (x = 0, 2) amorphous ribbons

400

Influence of stress on the temperature characteristics of martensitic transformation and on strain variation in Ti–Ni shape memory alloys

401

Influence of Stress Rate on Rheology – An Experimental Study on Rocksalt of Simla Himalaya, India

402

Influence of stress rate on water loss, matrix deformation and chondrocyte viability in impacted articular cartilage

403

Influence of stress relaxation on clamp-up force in hybrid composite-to-metal bolted joints

404

Influence of stress restraint on the expansive behaviour of concrete affected by alkali-silica reaction

405

Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures

406

Influence of stress softening on energy-absorption capability of polymeric foams

407

Influence of stress state and strain path on deformation induced martensitic transformations

408

Influence of stress state and strain rate on the behaviour of a rubber-particle reinforced polypropylene

409

Influence of stress state on high temperature fatigue crack growth in Inconel 718

410

Influence of Stress State on Soil-Water Characteristics and Slope Stability

411

Influence of stress state on the kinetics of γ-channel widening during high temperature and low stress creep of the single crystal superalloy CMSX-4

412

Influence of stress state on the kinetics of γ-channel widening during high temperature and low stress creep of the single crystal superalloy CMSX-4

413

INFLUENCE OF STRESS TESTING IN THE MANAGEMENT SYSTEM OF COMMERCIAL BANKS

414

Influence of stress waves on the dynamic progressive and dynamic plastic buckling of cylindrical shells

415

Influence of Stress, Fatigue, Sleep and Delayed Onset Muscle Soreness on Perceived Physical Enjoyment Exertion during Small Sided Games

416

Influence of stress-reduction methods on the strength of adhesively bonded joints composed of orthotropic brittle adherends

417

Influence of strike-slip fault segmentation on drainage evolution and topography. A case study: the Palomares Fault Zone (southeastern Betics, Spain)

418

Influence of striking edge radius (2 vs. 8mm) on instrumented Charpy data and absorbed energies

419

Influence of strip materials on behavior of incremental in-plane bending

420

Influence of strips configuration on the behaviour of axially loaded RC columns strengthened by steel angles and strips

421

Influence of Stroke on Performance Characteristics of Synthetic Jet Fan

422

Influence of strong axial quadrupole interactions on the measurement of nuclear polarization

423

Influence of strong axial quadrupole interactions on the measurement of nuclear polarization

424

Influence of strong electric field on dielectric permittivity of polycrystalline ice at MHz frequencies

425

Influence of strong magnetic fields on the ionization of the modulation-doped donors in AlxGa1 − xAsGaAsAlyGa1 − yAs single quantum wells

426

Influence of strong magnetic fields on the ionization of the modulation-doped donors in AlxGa1 − xAsGaAsAlyGa1 − yAs single quantum wells

427

Influence of strong monsoon winds on the water quality around a marine cage-culture zone in a shallow and semi-enclosed bay in Taiwan

428

Influence of strong noise on the decline and propagation of population in the delayed Malthus–Verhulst model

429

Influence of strongly magnetized plasma on photon splitting

430

Influence of strontia on various properties of Surgical Simplex® P acrylic bone cement and experimental variants

431

Influence of strontium and the importance of glass chemistry and structure when designing bioactive glasses for bone regeneration

432

Influence of strontium on electrochemical corrosion behavior of hot-dip galvanized coating

433

Influence of strontium on structure, sintering and biodegradation behaviour of CaO–MgO–SrO–SiO2–P2O5–CaF2 glasses

434

Influence of structural and interfacial properties of microemulsion eluent on chromatographic separation of simvastatin and its impurities

435

Influence of structural and morphological characteristics on the hydrogen production and sodium recovery in the NaOH–MnO thermochemical cycle

436

Influence of structural and preparation parameters of Fe2O3/Al2O3 catalysts on rate of production and quality of carbon nanotubes

437

Influence of structural and technological factors on the efficiency of armor elements based on ceramics

438

Influence of structural anisotropy on creep of rocksalt from Simla Himalaya, India: An experimental approach

439

Influence of structural arrangement of R2O2 slabs of layered cuprates on high-temperature properties important for application in IT-SOFC

440

Influence of structural changes in ferrocene phosphane aminophosphane ligands on their catalytic activity

441

Influence of structural changes in transmission of information between stock markets: A European empirical study

442

Influence of Structural Characteristics of Aleurone Layer on Milling Behavior of Durum Wheat (Triticum durum Desf.)

443

Influence of structural defects on magnetic properties of the submicrometer ceramic Mn3O4

444

Influence of structural defects on the insertion behavior of γ-MnO2: comparison of H+ and Li+

445

Influence of structural deterioration over time on the optimal time interval for inspection and maintenance of structures

446

Influence of structural differences and acidic properties of phosphotungstic acids on their catalytic performance for acylation of pyruvate ester to α-acyloxyacrylate ester

447

Influence of structural disorder on the current-voltage characteristic of a quasi-one-dimensional tunnel junction

448

Influence of structural disorder on the dynamics of mobile oxygen ions in Dy2(Ti1−yZry)2O7

449

Influence of structural distortions upon photoluminescence properties of Eu3+ and Tb3+ activated Na3Ln(BO3)2 (Ln=Y, Gd) borates

450

Influence of structural evolution on fluorescence properties of transparent glass ceramics containing LaF3 nanocrystals

451

Influence of structural features on Portuguese toddler child care quality

452

Influence of structural features on the photocatalytic activity of NaTaO3 powders from different synthesis methods Original Research Article

453

Influence of structural framework on mountain slope deformation in the Maiella anticline (Central Apennines, Italy)

454

Influence of structural heterogeneity of nanoporous sorbent walls on hydrogen storage

455

Influence of structural integrity on fatigue behavior of friction stir spot welded AZ31 Mg alloy

456

Influence of structural ordering on electrical conductivity of nanostructured manganese zinc ferrite

457

Influence of structural organization on tensile properties in mesomorphic isotactic polypropylene

458

Influence of structural parameters of Cu2O2 core on magnetic coupling in alkoxo-bridged Cu(II) binuclear system

459

Influence of structural parameters on magnetoresistive properties of CuFeNi melt spun ribbons

460

Influence of structural parameters on magnetoresistive properties of CuFeNi melt spun ribbons

461

Influence of structural parameters on methane adsorption over activated carbon: Evaluation by using D–A model

462

Influence of structural parameters on the tendency of VVER-1000 reactor pressure vessel steel to temper embrittlement

463

Influence of structural properties and hazard level on seismic loss estimation for light-frame wood structures

464

Influence of structural properties of alum and ferric flocs on sludge dewaterabilit

465

Influence of structural relaxation on atomic mobility in a Zr41.2Ti13.8Cu125Ni10.0Be22.5 (Vit1) bulk metallic glass

466

Influence of structural relaxation on the optical and electronic properties of embedded Ge nanocrystals

467

Influence of structural transformations on functional properties of Fe75Ni2Si8B13C2 amorphous alloy

468

Influence of structural variability upon sound perception: Usefulness of fractional factorial designs

469

Influence of Structural Variation in Room-Temperature Ionic Liquids on the Selectivity and Efficiency of Competitive Alkali Metal Salt Extraction by a Crown Ether

470

Influence of structure and chemical composition on oxygen permeability of crosslinked epoxy–amine coatings

471

Influence of structure changes of oxide films on their physical properties

472

Influence of structure development on atomic layer deposition of TiO2 thin films

473

INFLUENCE OF STRUCTURE OF THE CRYSTAL LATTICE OF NICKEL(II) COMPLEX WITH AMIDE-CONTAINING LIGAND ON ITS STABILITY AND ADSORPTION PROPERTIES

474

INFLUENCE OF STRUCTURE OF W-TYPE RADIATION TUBE ON ITS WORKING LIFE

475

Influence of structure on colour stability of anthocyanins and flavylium salts with ascorbic acid

476

Influence of structure on in vitro fermentability of commercial pectins and partially hydrolysed pectin preparations

477

Influence of structure on N–NO bond cleavage of aliphatic N-nitrosamines

478

Influence of structure on shear characteristics of the unsaturated loess in Lanzhou, China

479

Influence of structure on the antioxidant activity of indolinic nitroxide radicals

480

Influence of structure on the evolution of magnetic and mechanical properties of amorphous and nanocrystalline Fe85.4Hf1.4B13.2 alloy

481

Influence of structure on the ionisation constants of anthocyanin and anthocyanin-like wine pigments Original Research Article

482

Influence of structured wafer surfaces on the characteristics of Caco-2 cells

483

Influence of ST-Segment Recovery on Infarct Size and Ejection Fraction in Patients With ST-Segment Elevation Myocardial Infarction Receiving Primary Percutaneous Coronary Intervention

484

Influence of study design on the impact of bleaching agents on dental enamel microhardness: A review

485

Influence of stunning (S) on the homeometric and heterometric autoregulation of cardiac contraction

486

Influence of sub valvular pathology on immediate results and follow up events of Inoue balloon mitral valvotomy

487

Influence of subduction zone settings on the origin of forearc fluids: Halogen concentrations and 129I/I ratios in waters from Kyushu, Japan

488

Influence of subglottic stenosis on the flow-induced vibration of a computational vocal fold model

489

Influence of subgrain orientation on martensitic transformation in β1–Cu–Zn–Al-single crystals

490

Influence of subgrain orientation on martensitic transformation in β1–Cu–Zn–Al-single crystals

491

Influence of sublayer atoms on Si(100) surface reconstructions

492

Influence of sublimation and pyrolysis on quasi-steady deflagrations in confined porous energetic materials

493

Influence of submarine fumaroles on the distribution of mercury in the sediment of Kagoshima Bay, Japan

494

Influence of submarine springs and wastewater on nutrient dynamics of Caribbean seagrass meadows

495

Influence of submersion season on the development of test panel biofouling communities in a tropical coast

496

Influence of sub-micrometer notches on the fracture of single crystal silicon thin films

497

Influence of sub-micron surface patterns on the deposition of model proteins during active filtration

498

Influence of Sub-Minimum Inhibitory Concentrations of Cefodizime on the Phagocytosis, Intracellular Killing and Oxidative Bursts of Human Polymorphonuclear Leukocytes

499

Influence of subphase on the orientation of helical peptides at interface

500

Influence of subsequent cold work on the superplastic properties of a friction stir welded (FSW) aluminium alloy

501

Influence of substituent type and position on photooxidation of phenolic compounds: Response surface methodology approach

502

Influence of substituents in the phenyl ring on photophysical properties of 3-[2-(phenyl)benzoxazol-5-yl]alanine derivatives

503

Influence of substituents on CH-π interactions in complexes involving X-acetylene and planar cyclooctatetraene

504

Influence of substituents on enantiomeric ratio in transesterification of racemic C-3 synthons using lipase B from Candida antarctica

505

Influence of substituents on selectivity and efficiency of chiral separations of anions containing single nido-7,8-dicarbaundecaborane cluster with α-cyclodextrin

506

Influence of substituents on the reorientational behavior in photocrosslinkable polymer liquid crystal films with p-substituted cinnamoyloxybiphenyl side groups by irradiating with linearly polarized ultraviolet light and annealing

507

Influence of substituents on the structures of hybrid complexes constructed from tetranuclear copper(I) 1,2,4-triazolate clusters and octamolybdates

508

Influence of substituted 1,4-anthraquinones on the chlorophyll fluorescence and photochemical activity of pea thylakoid membranes

509

Influence of substituted benzaldehydes and their derivatives as inhibitors for hydrogen evolution in lead/acid batteries

510

Influence of substituted pyridines in the chemical behavior of dimethyl sulfoxide ruthenium complexes

511

Influence of Substitution of Peat with Iranian Zeolite (Clinoptilolite) in Peat Medium on Ficus benjamina Growth

512

Influence of substitution of phenyl group by naphthyl in a diphenylthiourea molecule on corrosion inhibition of cold-rolled steel in 0.5 M H2SO4

513

Influence of substitution on dielectric and impedance spectroscopy of Sr1 − xBi2 + yNb2O9 ferroelectric ceramics synthesized by chemical route

514

Influence of substitution on the optical properties of functionalized pentacene monomers and crystals: Experiment and theory

515

Influence of substitution pattern on intramolecular alkylidene carbene insertion reactions

516

Influence of substitutional atoms on the Snoek peak of carbon in b.c.c. iron Original Research Article

517

Influence of substitutional impurities on hydrogen diffusion in B2-TiFe alloy

518

Influence of substitutions on asymmetric dihydroxychlorins with regard to intracellular uptake, subcellular localization and photosensitization of Jurkat cells

519

Influence of substoichiometer on the laser-induced damage characters of HfO2 thin films

520

Influence of sub-stoichiometric sorbitol addition modes on the structure and catalytic performance of alumina-supported cobalt Fischer–Tropsch catalysts

521

Influence of substrate activation (hydrolysis of ATP by first steps of glycolysis and β-oxidation) on the effect of enzyme deficiencies, inhibitors, substrate shortage and energy demand on oxidative phosphorylation Original Research Article

522

Influence of substrate additives on the mechanical properties of ultrathin oxide coatings on poly(ethylene terephthalate)

523

Influence of substrate and/or neurohormonal mimic on in vitro pancreatic enzyme release from calves postruminally infused with partially hydrolyzed starch and/or casein

524

Influence of substrate bias on the composition of SiC thin films fabricated by PECVD and underlying mechanism

525

Influence of substrate bias on the mechanical properties of ta-C:Co films prepared by filtered cathodic vacuum arc technique

526

Influence of substrate bias on the structure and mechanical properties of ta-C:W films deposited by filtered cathodic vacuum arc

527

Influence of substrate bias on the structure and properties of ZrN films deposited by cathodic vacuum arc

528

Influence of substrate bias voltage on deposition behavior and micro-indentation hardness of Ti–Si–N coatings by a hybrid coating system of arc ion plating and sputtering techniques

529

Influence of substrate bias voltage on structure and properties of Cr–Mo–Si–N coatings prepared by a hybrid coating system

530

Influence of substrate bias voltage on structure and properties of the CrAlN films deposited by unbalanced magnetron sputtering

531

Influence of Substrate Bias Voltage on the Impurity Concentrations in Hf Films Deposited by Ion Beam Deposition Method

532

Influence of substrate bias voltage on the microstructure and residual stress of CrN films deposited by medium frequency magnetron sputtering

533

Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings

534

Influence of Substrate Composition on the Helicase Activity of Transcription Termination Factor Rho: Reduced Processivity of Rho Hexamers during Unwinding of RNA–DNA Hybrid Regions

535

Influence of substrate concentration and moisture content on the specific methanogenic activity of dry mesophilic municipal solid waste digestate spiked with propionate

536

Influence of substrate conductivity on electrochemical polymerization of O-methoxyaniline

537

Influence of substrate crystallographic orientation on the wettability and adhesion of α-Al2O3 single crystals by liquid Al and Cu

538

Influence of substrate crystallography on the room temperature synthesis of AlN thin films by reactive sputtering

539

Influence of substrate dc bias on chemical bonding, adhesion and roughness of carbon nitride films

540

Influence of substrate dc bias on crystallinity of silicon films grown at a high rate from inductively-coupled plasma CVD

541

Influence of substrate deformation on piezoelectric displacement measurement of piezoelectric film

542

Influence of substrate dielectric permittivity on local capacitive behavior in graphene

543

Influence of substrate domain boundaries on surface reconstructions of Ga/Si(1 1 1)

544

Influence of substrate exposure history on biodegradation in a porous medium

545

Influence of substrate hardness on deposition behavior of single porous WC-12Co particle in cold spraying

546

Influence of substrate hardness transition on built-up of nanostructured WC–12Co by cold spraying

547

Influence of substrate loading intensity on floc size in activated sludge process

548

Influence of substrate material and topography on the tribological behaviour of submicron coatings

549

Influence of substrate material on oxidation behavior and cyclic lifetime of EB-PVD TBC systems

550

Influence of substrate material on the life of atmospheric plasma sprayed thermal barrier coatings

551

Influence of substrate microstructure on the contact fatigue strength of coated cold-work tool steels

552

Influence of substrate misorientation and growth temperature on N incorporation in InGaAsN/GaAs quantum wells grown on (1 1 1)B GaAs

553

Influence of substrate morphology on Pb growth

554

Influence of substrate on crystallization in polythiophene/fullerene blends

555

Influence of substrate on fire performance of wall lining materials

556

Influence of substrate on fouling in anoxic immersed membrane bioreactors

557

Influence of substrate on the distribution of the Hawaiian Silversword (Argyroxiphium sandwicense DC.) in Haleakala (Maui, HI)

558

Influence of substrate on the performances of semi-insulating GaAs detectors

559

Influence of substrate on the performances of semi-insulating GaAs detectors

560

Influence of substrate orientation on In0.5Ga0.5As/GaAs quantum dots grown by molecular beam epitaxy

561

Influence of substrate oxidation on the reward system, no role of dietary fibre

562

Influence of Substrate pH on Root Growth, Biomass and Leaf Mineral Contents of Grapevine Rootstocks Grown in Pots

563

Influence of substrate porosity and thickness on the collection efficiency of an impactor stage

564

Influence of substrate pre-treatments on residual stresses and tribo-mechanical properties of TiAlN-based PVD coatings

565

Influence of substrate pre-treatments on the growth of SixNyHz thin films by plasma enhanced chemical vapor deposition

566

Influence of substrate rocks on Fe–Mn crust composition

567

Influence of substrate rotation and target arrangement on the periodicity and uniformity of layered coatings

568

Influence of substrate roughness on orientation measurements by second-harmonic generation

569

Influence of substrate strain anisotropy in TBC system failure

570

Influence of substrate surface conditions on the plasma sprayed ceramic and metallic particles flattening

571

Influence of substrate surface topography in the deposition of nanostructured diamond-like carbon films by high density plasma chemical vapor deposition

572

Influence of substrate surfaces on the growth of organic films

573

Influence of substrate tectonic heritage on the evolution of composite volcanoes: Predicting sites of flank eruption, lateral collapse, and erosion

574

Influence of substrate temperature and atmosphere on nano-graphene formation and texturing of pulsed Nd:YAG laser-deposited carbon films

575

Influence of substrate temperature and post-treatment on the properties of ZnO:Al thin films prepared by pulsed laser deposition

576

Influence of substrate temperature on electrical and optical properties of p-type semitransparent conductive nickel oxide thin films deposited by radio frequency sputtering

577

Influence of substrate temperature on magnetotransport properties of thin films of La Sr MnO 0.7 0.3 3

578

Influence of substrate temperature on morphological and ferroelectric properties of Ba0.75Sr0.25TiO3 thin films deposited on nichrome substrates by Rf sputtering

579

Influence of substrate temperature on morphology of SiOx films deposited on particles by PECVD

580

Influence of substrate temperature on physical properties of sprayed Zn0.85Mn0.15O films

581

Influence of substrate temperature on properties of MgF2 coatings

582

Influence of substrate temperature on properties of sprayed WO3 thin films

583

Influence of substrate temperature on structural and optical properties of ZnCdO thin films deposited by dc magnetron sputtering

584

Influence of substrate temperature on structural, morphological and electrical properties of La0.6Sr0.4Co0.2Fe0.8O3 thin films for IT-SOFCs

585

Influence of substrate temperature on structural, optical, and electrical properties of flash evaporated CuIn0.81Al0.19Se2 thin films

586

Influence of substrate temperature on structure and mechanical, properties of multi-element (AlCrTaTiZr)N coatings

587

Influence of substrate temperature on structures and dielectric properties of pyrochlore Bi1.5Zn1.0Nb1.5O7 thin films prepared by pulsed laser deposition

588

Influence of substrate temperature on surface textured ZnO:Al films etched with NaOH solution

589

Influence of substrate temperature on surface structure and electrical resistivity of the evaporated tin sulphide films

590

Influence of substrate temperature on the electrical and optical properties of Ga-doped ZnO thin films fabricated by continuous composition spread

591

Influence of substrate temperature on the etching of silver films using inductively coupled Cl2-based plasmas

592

Influence of substrate temperature on the materials properties of reactive DC magnetron sputtered Ti/TiN multilayered thin films

593

Influence of substrate temperature on the optical and piezoelectric properties of ZnO thin films deposited by rf magnetron sputtering

594

Influence of substrate temperature on the properties of CeO2 thin films by simple nebulizer spray pyrolysis technique

595

Influence of substrate temperature on the properties of laser ablated indium tin oxide films

596

Influence of substrate temperature on the texture of barium ferrite film by magnetron sputtering

597

Influence of substrate temperature on titanium oxynitride thin films prepared by reactive sputtering

598

Influence of substrate temperature on ultraviolet emission of ZnO films prepared by ultrasonic spray pyrolysis

599

Influence of substrate wood-chip particle size on shiitake (Lentinula edodes) yield

600

Influence of substrate, pH and magnetic field onto composition and current efficiency of electrodeposited Ni–Fe alloys

601

Influence of substrate, shape, and thickness on microtensile specimensʹ structural integrity and their measured bond strengths

602

Influence of substrates on photoelectrochemical performance of sprayed n-CdIn2S4 electrodes

603

Influence of substrates on roughness of self-supporting Ni films

604

Influence of substrates on roughness of self-supporting Ni films

605

Influence of substrate-to-inoculum ratio on the batch anaerobic digestion of bean curd refuse-okara under mesophilic conditions

606

Influence of substratum surface chemistry/energy and topography on the human fetal osteoblastic cell line hFOB 1.19: Phenotypic and genotypic responses observed in vitro

607

Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns

608

Influence of substructure design and spacer settings on the in vitro performance of molar zirconia crowns

609

Influence of subsurface drainage on crop production and soil quality in a low-lying acid sulphate soil

610

Influence of subsurface, charged impurities on the adsorption of chlorine at TiO2(1 1 0)

611

Influence of sub-zero treatments on fracture toughness of AISI D2 steel

612

Influence of successive phases of volcanic construction and erosion on Mayotte Islandʹs hydrogeological functioning as determined from a helicopter-borne resistivity survey correlated with borehole geological and permeability data

613

Influence of sucrose concentration on in vitro rooting, growth, endogenous sugars and ex vitro survival of juvenile avocado

614

Influence of sucrose on the rheology and granule size of cross-linked waxy maize starch dispersions heated at two temperatures

615

Influence of sucrose on thermal and pasting properties of tapioca starch and xanthan gum mixtures Original Research Article

616

Influence of sucrose solution concentration on kinetics and yield during osmotic dehydration of mango Original Research Article

617

Influence of Sucrose, Glucose, Stevia Leaf and Stevioside on the Growth and Lactic Acid Production by Lactobacillus plantarum, Lactobacillus brevis and Lactobacillus casei

618

Influence of Sucrose, Mucin and Xanthan Gum on Spore Germination of Ten Different Fungi

619

Influence of suction cycles on the soil fabric of compacted swelling soil

620

Influence of Sudden Column Loss on Dynamic Response of Steel Moment Frames under Blast Loading

621

Influence of Sugar Beet Seed Treatment with Pseudomonas fluorescens and Low Fungicide Doses on Infection with Pythium and Plant Yield and Quality

622

Influence of sugar cane burning on aerosol soluble ion composition in Southeastern Brazil

623

Influence of sugar composition on water sorption isotherms and on glass transition in apricots Original Research Article

624

Influence of sugar-cane bagasse ash and fly ash on the rheological behavior of cement pastes and mortars

625

Influence of sugars and polyols on the thermal stability of purified tomato and cucumber pectinmethylesterases: a basis for TTI development

626

Influence of sugars on high-pressure induced gelation of skim milk dispersions

627

Influence of sugars on the characteristics of glucono-δ-lactone-induced soy protein isolate gels

628

Influence of suggestion in the DRM paradigm: What state of consciousness is associated with false memory?

629

Influence of Sulfate and Chloride on The Mechanical Properties of Fired Clay Masonry Wall

630

Influence of sulfate and phosphate on the deposition of plasmid DNA on silica and alumina-coated surfaces

631

Influence of sulfate input on freshwater sediments: Insights from incubation experiments

632

Influence of sulfate ions on the interaction between fatty acids and calcite surface

633

Influence of sulfate on the transport of bacteria in quartz sand

634

Influence of sulfate solution concentration on the formation of gypsum in sulfate resistance test specimen

635

Influence of sulfate-based anion ionic liquids on the separation factor of the binary azeotropic system acetone + methanol

636

Influence of sulfate-reducing bacteria, sulfide and molybdate on hydrogen photoproduction by purple nonsulfur bacteria

637

Influence of sulfidation ambience on the properties of nanocrystalline ZnS films prepared by sulfurizing the as-sputtered ZnO films

638

Influence of sulfidation treatment on the structure and tribological properties of nitrogen-doped diamond-like carbon films

639

Influence of sulfide (S2−) on preservation and speciation of inorganic arsenic in drinking water

640

Influence of sulfide concentration and macronutrients on the characteristics of metal precipitates relevant to metal recovery in bioreactors

641

Influence of sulfide concentration on the corrosion behavior of pure copper in synthetic seawater

642

Influence of Sulfobetaines on the Stability of the Citrobacter diversus ULA-27 (beta)-lactamase

643

Influence of sulfonated acetone–formaldehyde condensation used as dispersant on low rank coal–water slurry

644

Influence of sulfur impurities on the stability of La0.6Sr0.4Co0.2Fe0.8O3 cathode for solid oxide fuel cells

645

Influence of sulfur on apparent N-use efficiency, yield and quality of oilseed rape (Brassica napus L.) grown on a calcareous soil

646

Influence of sulfur on oxygen adsorption onto a polycrystalline Zr surface

647

Influence of sulfur on the carbon deposition in steam reforming of liquid hydrocarbons over CeO2–Al2O3 supported Ni and Rh catalysts Original Research Article

648

Influence of sulfur on the solubility of graphite in Fe–C–S melts: optimization of interaction parameters Original Research Article

649

Influence of sulfur oxidation state and steric bulk upon trifluoromethyl ketone (TFK) binding kinetics to carboxylesterases and fatty acid amide hydrolase (FAAH) Original Research Article

650

Influence of sulfur-bearing polyatomic species on high precision measurements of Cu isotopic composition

651

Influence of sulfuretted temperature on the luminescent properties of Y2O2S:Eu3+, Mg2+, Ti4+ nanoarrays

652

Influence of sulfuric acid baking on leaching of spent Ni–Mo/Al2O3 hydro-processing catalyst

653

Influence of sulphate, chloride, and thiocyanate salts on formation of β-lactoglobulin–pectin microgels

654

Influence of sulphur on the shell composition of Pt–Rh nanocatalysts: a theoretical model

655

Influence of sulphur substitution on structural and electrical properties of lithium-manganese spinels Original Research Article

656

Influence of sulphur supply on glucose and ATP concentrations of inoculated broad beans ( Vicia faba minor L.)

657

Influence of sulphur-fumigation on the quality of white ginseng: A quantitative evaluation of major ginsenosides by high performance liquid chromatography

658

Influence of summer conditions on the larval fish assemblage in the eastern coast of Tunisia (Ionian Sea, Southern Mediterranean)

659

Influence of summer daylight saving time on scattered erythemal solar ultraviolet exposures

660

Influence of summer flood on the net ecosystem exchange of CO2 in a temperate sedge-grass marsh

661

INFLUENCE OF SUMMER MANAGEMENT PRACTICES OF GRAZED WHEAT PASTURES ON RUNOFF, SEDIMENT, AND NUTRIENT LOSSES

662

Influence of sunflower (Helianthus annuus L.) crop management on Phoma black stem (Phoma macdonaldii Boerema)

663

Influence of sunflower meal based diets supplemented with exogenous enzyme and digestible lysine on performance, digestibility and carcass response of broiler chickens

664

Influence of sunflower oil based nanoemulsion (AUSN-4) on the shelf life and quality of Indo-Pacific king mackerel (Scomberomorus guttatus) steaks stored at 20 °C

665

Influence of sunflower on subsequent crops

666

Influence of sunlight on DNA damage in mussels exposed to polycyclic aromatic hydrocarbons

667

Influence of super plasticizer and Ca(OH)2 on the stability of functionalized multi-walled carbon nanotubes dispersions for cement composites applications

668

Influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings

669

Influence of superconducting transition on low temperature jump-like deformation of metals and alloys

670

Influence of superconducting transition on low temperature jump-like deformation of metals and alloys

671

Influence of Superconductor Fault Current Limiter on Transformers Lifetime

672

Influence of supercontinents on deep mantle flow

673

Influence of Supercooling Level on Kinetics of Phase Separation in Solid Mixtures of 4He in 3He

674

Influence of Supercritical Antisolvent Micronization Parameters on Nalmefene HCl Powder Characteristics

675

Influence of supercritical ORC parameters on plate heat exchanger design

676

Influence of superdiffusion on directional motion

677

Influence of superficial oxidation on the pyrophoric behaviour of uranium hydride and uranium powders in air

678

Influence of superheat before quench on the structure and stability of NiP metallic glasses studied by neutron scattering techniques

679

Influence of superheating on casting of γ-TiAl

680

Influence of superimposed alcoholic hepatitis on the outcome of liver transplantation for end-stage alcoholic liver disease

681

Influence of superimposed normal stress on shear strength of perfect bcc crystals

682

Influence of superimposed normal stress on the shear strength in perfect fcc metals

683

Influence of Superoxide Radical and Hydrogen Peroxide on Arachidonic Acid Mobilization

684

Influence of superplasticizer and curing on porosity and pore structure of cement paste

685

Influence of superplasticizer and curing on porosity and pore structure of cement paste

686

Influence of superplasticizer on composition and pore structure of C–S–H

687

Influence of superplasticizer type and dosage on the slump loss of Portland cement mortars—Part II

688

Influence of superplasticizer type and mix design parameters on the performance of them in concrete mixtures

689

Influence of superplasticizers on pore solution composition and on expansion of concrete due to alkali-silica reaction

690

Influence of superplasticizers on rheological behaviour of fresh cement mortars

691

Influence of superplasticizers on the evolution of ultrasonic P-wave velocity through cement pastes at early age

692

Influence of superplasticizers on the hydration of cement and the pore structure of hardened cement

693

Influence of superplasticizers on the long-term properties of cement pastes and possible impact on radionuclide uptake in a cement-based repository for radioactive waste

694

Influence of superplasticizers on the rheology and stability of limestone and cement pastes

695

Influence of superposition length on mechanical resistance of single-lap adhesive joints

696

Influence of supplemental aminooligosaccharides on in vitro disappearance of diets for dairy cattle and its effects on milk yield

697

Influence of Supplemental Dietary Poultry Fat on the Blood Characteristics of Commercial Layers Inoculated Before or at the Onset of Lay with F-Strain Mycoplasma gallisepticum

698

Influence of Supplemental Dietary Poultry Fat, Phytase and 25-hydroxycholecalciferol on the Blood Characteristics of Commercial Layers Inoculated Before or at the Onset of Lay with F-strain Mycoplasma gallisepticum

699

Influence of supplemental dietary sprouted wheat on reproduction in artificially inseminated doe rabbits

700

Influence of supplemental enzymes on the performance and phosphorus excretion of broilers fed wheat-based diets to 6 weeks of age

701

Influence of supplemental irrigation and soil surface furrowing on barley yield in arid areas affected by surface crust

702

Influence of supplemental phytase on growth performance, digestion and phosphorus balance of lambs fed sorghum-based diets

703

Influence of supplemental vitamin C on postmortem protein degradation and fatty acid profiles of the longissimus thoracis of steers fed varying concentrations of dietary sulfur

704

Influence of supplemental vitamin D on intensity of benign paroxysmal positional vertigo: A longitudinal clinical study

705

Influence of Supplementary Cementitious Material on Estimated Service Life of Structure in Chloride Environment

706

Influence of supplementary cementitious materials on engineering properties of high strength concrete

707

Influence of supplementary feeding with multipurpose leguminous tree leaves on kid growth and milk production in the West African dwarf goat

708

Influence of supplementary in-bed chloropicrin application on soilborne pest control in tomato (Lycopersicon esculentum)

709

Influence of supplementing vitamin C to yearling steers fed a high sulfur diet during the finishing period on meat color, tenderness and protein degradation, and fatty acid profile of the longissimus muscle

710

Influence of Supplier Appraisal on Procurement Performance in the Real Estate Industry in Kenya: A case study of International House Ltd.

711

Influence of supply and return water temperatures on the energy consumption of a district cooling system

712

Influence of support acid–base properties on the platinum-catalyzed enantioselective hydrogenation of activated ketones

713

Influence of support acidity of NiMoS catalysts in the activity for hydrogenation and hydrocracking of tetralin Original Research Article

714

Influence of support and transition metal (Cr, Mn, Fe, Co, Ni and Cu) on the hydrogenation of p-chloronitrobenzene over supported platinum catalysts

715

Influence of support ionicity on the hydrogen chemisorption of Pt particles dispersed in Y zeolite: consequences for Pt particle size determination using the H/M method

716

Influence of support leadership and teamwork cohesion on organizational learning, innovation and performance: an empirical examination

717

Influence of support material properties on the potential selection of Archaea during initial adhesion of a methanogenic consortium

718

Influence of support media on biomass growth and retention in anaerobic filters

719

Influence of support on catalytic behavior of nickel catalysts in oxidative steam prereforming of n-butane for fuel cell applications Original Research Article

720

Influence of support on the activity of Mn supported catalysts for SCR of NO with ammonia

721

Influence of support porosity and Pt content of Pt/carbon aerogel catalysts on metal dispersion and formation of self-assembled Pt–carbon hybrid nanostructures Original Research Article

722

Influence of support properties on the sound radiated from the vibrations of rectangular plates

723

Influence of support recrystallization techniques on catalyst performance in olefin polymerization

724

Influence of support structure on the permeation behavior of polyetherimide-derived carbon molecular sieve composite membrane

725

Influence of support surface properties on activity of bacteria immobilised on activated carbons for water denitrification Original Research Article

726

Influence of support’s oxygen functionalization on the activity of Pt/carbon xerogels catalysts for methanol electro-oxidation

727

Influence of supported gold particles on the surface reactions of ethanol on TiO2 Original Research Article

728

Influence of supporting electrolyte activity on formal potentials measured for dissolved internal standards in acetonitrile

729

Influence of supporting media in suspension on membrane fouling reduction in submerged membrane bioreactor (SMBR)

730

Influence of supports on catalytic behavior of nickel catalysts in carbon dioxide reforming of toluene as a model compound of tar from biomass gasification

731

Influence of Supports on Catalytic Performance and Carbon Deposition of Palladium Catalyst for Methane Partial Oxidation

732

Influence of supports on the activities of copper oxide species in the low-temperature NO+CO reaction

733

Influence of supranutritional vitamin E and copper on α-tocopherol deposition and susceptibility to lipid oxidation of porcine membranal fractions of M. Psoas major and M. Longissimus dorsi

734

Influence of surface acceptor–donor couples on conductivity and other electrochemical properties of nonstoichiometric NiO at 200 °C

735

Influence of surface acidic functional groups on activated carbons for adsorption and desorption kinetics of phenol from aqueous solutions

736

Influence of surface activation by plasma and nanoparticle adsorption on the morphology, thermal stability and combustion behavior of PET fabrics

737

Influence of surface activation on the hydrogen permeation properties of PdAg cathode membrane

738

Influence of surface active substances on bubble motion and collision with various interfaces

739

Influence of surface additives iodine and indium on the initial growth in copper chemical vapor deposition

740

Influence of surface affinity of planar walls on effective interaction between the wall and colloids

741

Influence of surface and heat treatments on the flexural strength of a glass-infiltrated alumina/zirconia-reinforced dental ceramic

742

Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic

743

Influence of surface and subsidence thermal inversion on PM2.5 and black carbon concentration

744

Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders

745

Influence of surface carbon coverage of C1 (TMS) stationary phases on the separation of nonylphenol ethoxylate ethoxymers

746

Influence of surface characteristics on biofouling formed on polymers exposed to coastal sea waters of India

747

Influence of surface charge and surface structure on the molecular and ionic sublimation of KCl single crystal

748

Influence of surface charge and textural properties of carbon electrodes on nitrate ion removal by electroadsorption

749

Influence of surface charge on lysozyme adsorption to ceria nanoparticles

750

Influence of surface charge on thermal positive ion emission from potassium bromide

751

Influence of surface charges in the finite volume modeling of conductive regions for 3-D eddycurrent computation

752

Influence of surface chemical heterogeneity on attachment and detachment of microparticles

753

Influence of surface chemistry on the electronic properties of graphene nanoflakes

754

Influence of surface cleaning effects on properties of Schottky diodes on 4H–SiC

755

Influence of surface coating on ballistic performance of aluminum plates subjected to high velocity impact loads

756

Influence of surface condition on deuterium release from Li2TiO3 pebble

757

Influence of surface condition on the fatigue behaviour of specimens made of a SAE 5115 case-hardened steel

758

Influence of surface conditioning and cleaning methods on resin bonding to zirconia ceramic

759

Influence of surface conditioning on bonding to polyetheretherketon (PEEK)

760

Influence of surface coverage with poly(ethylene oxide) on attachment of sterically stabilized microspheres to rat Kupffer cells in vitro

761

Influence of Surface Curvature on Coanda Effect for Vertical Jet Impacting Horizontal Cylinder

762

Influence of surface defects and corrosive medium on the fatigue resistance of ST17G1S steel

763

Influence of surface defects on the biaxial strength of a silicon nitride ceramic – Increase of strength by crack healing

764

INFLUENCE OF SURFACE DEFORMATION AND ELECTROCHEMICAL VARIABLES ON CORROSION AND CORROSION FATIGUE CRACK DEVELOPMENT

765

Influence of surface deformation upon the properties of Cu-contacts on CdTe single crystals

766

Influence of surface degrees of freedom on the adsorption of Ge ad-atoms on Si(1 0 0)

767

Influence of surface diffusion on catalytic reactivity of spatially inhomogeneous surfaces – mean-field modeling

768

Influence of surface displacement on solid state flow induced by horizontally heterogeneous Joule heating in the inner core of the Earth

769

Influence of surface effects on the performance of lead–niobium–germanate optical waveguides

770

Influence of surface electronic structure on the Casimir force

771

Influence of surface energy and relative humidity on AFM nanomechanical contact stiffness

772

Influence of surface energy distribution on neuritogenesis

773

Influence of surface energy of modified surfaces on bacterial adhesion Original Research Article

774

Influence of surface esterification with alkenyl succinic anhydrides on mechanical properties of corn starch films

775

Influence of surface evaporation on stratification in liquid hydrogen tanks of different aspect ratios

776

Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres

777

Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia

778

Influence of surface finishing on residual stress depth profiles of a coarse-grained nickel-base superalloy

779

Influence of surface finishing on residual stress depth profiles of a coarse-grained nickel-base superalloy

780

Influence of surface forcing on near-surface and mixing layer turbulence in the tropical Indian Ocean

781

Influence of surface free energy on the adhesion of marine benthic diatom Nitzschia closterium MMDL533

782

Influence of surface functionalities on ethanol adsorption characteristics in activated carbons for adsorption heat pumps

783

Influence of surface functionalization on the thermal and electrical properties of nanotube–PVA composites

784

Influence of surface groups of proteins on water studied by freezing/thawing hysteresis and infrared spectroscopy Original Research Article

785

Influence of Surface Heterogeneities on Complexation of Ethylene with Active Sites of NiMCM-41 Nanocatalyst: A Density Functional Theory Study

786

Influence of surface heterogeneities on the formation of diffusion-limited aggregates

787

Influence of surface heterogeneity in electroosmotic flows—Implications in chromatography, fluid mixing, and chemical reactions in microdevices

788

Influence of surface heterogeneity on hydrogen adsorption on activated carbons

789

Influence of surface hydrophilicity on polytetrafluoroethylene flat sheet membrane fouling in a submerged membrane bioreactor using two activated sludges with different characteristics

790

Influence of surface hydroxyls on the formation of Zr-based conversion coatings on AA6014 aluminum alloy

791

Influence of surface ionization on the adsorption of aqueous mercury chlorocomplexes by activated carbons Original Research Article

792

Influence of surface ionization on the adsorption of aqueous zinc species by activated carbons Original Research Article

793

Influence of surface layer removal of shade guide tabs on the measured color by spectrophotometer and spectroradiometer

794

Influence of surface macro-texture and binder dosage on the adhesion between bituminous pavement layers

795

Influence of surface microstructure on the sliding friction of plantar skin against hard substrates

796

Influence of surface modification adopting thermal treatments on dispersion of detonation nanodiamond

797

Influence of surface modification of alumina on bond strength in Al2O3/Al/Al2O3 joints

798

Influence of surface modification on protein retention in ion-exchange chromatography: Evaluation using different retention models

799

Influence of surface modification on structure and electrochemical performance of LiNi0.5Co0.5VO4

800

Influence of surface modification on the apatite formation and corrosion behavior of Ti and Ti-15Mo alloy for biomedical applications

801

Influence of surface modification with Sn6O4(OH)4 on electrochemical performance of ZnO in Zn/Ni secondary cells

802

Influence of surface modifications to titanium on antibacterial activity in vitro

803

Influence of surface modified multiwalled carbon nanotubes on the mechanical and electroactive shape memory properties of polyurethane (PU)/poly(vinylidene diflouride) (PVDF) composites

804

Influence of surface modified TiO2 nanoparticles by gallates on the properties of PMMA/TiO2 nanocomposites

805

Influence of Surface Modifying Macromolecules (SMMs) on Polyethersulfone Hollow Fiber Membranes for Water Separations

806

Influence of surface modifying macromolecules on the surface properties of poly(ether sulfone) ultra-filtration membranes

807

Influence of surface morphology and roughness on water wetting properties of low temperature nitrided austenitic stainless steels

808

Influence of surface morphology and surface area on release behavior of hydrogen isotopes in LiNbO3

809

Influence of surface morphology of cpTi on the adsorption and attachment of collagen/chitosan

810

Influence of surface morphology on corrosion and electronic behavior

811

Influence of surface morphology on corrosion and electronic behavior Original Research Article

812

Influence of surface morphology on the field emission properties of planar SiC/Si heterostructures formed by ion beam synthesis

813

Influence of Surface Nano!Ultrafine Structure Achieved by Deep Rolling Process on Plasma Nitriding an‎d Tribological Properties of the AISI 316L Stainless Steel

814

Influence of surface nano/ultrafine structure formed via pre-deep rolling process on the plasma nitriding characteristics of the AISI 316L stainless steel

815

Influence of surface nitriding treatment on rolling contact behavior of Fe-based plasma sprayed coating

816

Influence of surface on chemical kinetic of pyrocarbon deposition obtained by propane pyrolysis

817

Influence of surface orientation on the formation of sputtering-induced ripple topography in silicon

818

Influence of surface oxidation of titanium on adhesion

819

Influence of surface oxidation on electric potential measurements in MHD liquid metal flows

820

Influence of surface oxidation on the morphological and crystallographic structure of multi-walled carbon nanotubes via different oxidants

821

Influence of surface oxidation on the photoelectron diffraction intensities from InP single crystals

822

Influence of surface oxidation on transmission electron microscopy characterization of Fe–Ga alloys

823

Influence of surface oxides on the adhesion of a wild strain of Pseudomonas sp. to aluminium brass

824

Influence of surface oxides on the impedance behavior of carbon-based electrochemical capacitors

825

Influence of surface penetration on measured fluid force on a hand model

826

Influence of surface phenomena on free-molecule gas flow in fine channels

827

Influence of surface preparation and ion flux on the nitriding efficiency of austenitic stainless steel

828

Influence of surface preparation on CdZnTe nuclear radiation detectors

829

Influence of surface preparation on roughness parameters, friction and wear

830

Influence of surface pretreatment and charge–discharge mode on cycle performance of metal hydride electrodes

831

Influence of surface pretreatment of fiber posts on cement delamination

832

Influence of surface pretreatment of titanium- and cobalt-based biomaterials on covalent immobilization of fibrillar collagen

833

Influence of surface pretreatment on case formation during gaseous nitriding

834

Influence of surface pretreatment on the anodizing film of Mg alloy and the mechanism of the ultrasound during the pretreatment

835

Influence of surface pretreatment on the chromium-free conversion coating of magnesium alloy

836

Influence of surface pre-treatments on disturbed rolled-in subsurface layers of aluminium alloys

837

Influence of surface processes on the dilational visco-elasticity of surfactant solutions

838

Influence of surface properties and bulk viscosity on bubble size prediction during foaming operation

839

Influence of surface properties and iron addition on the SO2 adsorption capacity of activated carbons Original Research Article

840

Influence of surface properties of carbon fibres on the adsorption of catalase Original Research Article

841

Influence of surface properties of ceramic particles on their incorporation into cobalt electroless deposits

842

Influence of surface properties of polymeric nanoparticles on their membrane affinity

843

Influence of surface properties of zinc oxide nanoparticles on their cytotoxicity

844

Influence of surface properties on bioactivity and pull-out torque in cold thread rolled Ti rod—Development of bioactive metal-forming technology

845

Influence of surface quality and porosity on fatigue behaviour of Ti–6Al–4V components processed by MIM

846

Influence of surface quenching on luminescence dynamics of ion centers in nanocrystals

847

Influence of surface reconstruction on MBE growth of layered GaSe on Si(111) substrates

848

Influence of surface reconstruction on Pbsingle bondZnSe interface formation

849

Influence of surface roughness and coating type on the galling properties of coated forming tool steel

850

Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefins

851

Influence of surface roughness and running-in on the lubrication of steel surfaces with oil containing MoS2 nanotubes in all lubrication regimes

852

Influence of surface roughness effects on the performance of non-recessed hybrid journal bearings

853

Influence of surface roughness in hydrological response of semiarid catchments

854

Influence of Surface Roughness of Galvanized Steel Sheet on Self-lubricated Coating Original Research Article

855

Influence of surface roughness of PVD coatings on tribological performance in sliding contacts

856

Influence of surface roughness of stainless steel on microbial adhesion and corrosion resistance

857

Influence of surface roughness on consecutively hydrogen absorption cycles in Ti–6Al–4V alloy

858

Influence of surface roughness on friction during metal forming processes

859

Influence of surface roughness on gecko adhesion

860

Influence of surface roughness on mechanical strength of resin composite versus glass ceramic materials

861

Influence of surface roughness on pressure distribution and film thickness in EHL-contacts

862

Influence of surface roughness on space charge limited emission

863

Influence of surface roughness on streptococcal adhesion forces to composite resins

864

Influence of surface roughness on the bond of FRP laminates to concrete

865

Influence of surface roughness on the corrosion behaviour of magnesium alloy

866

Influence of surface roughness on the electrical conductivity of semiconducting thin films

867

Influence of surface roughness on the supercooling degree: Case of selected water/ethanol solutions frozen on aluminium surfaces

868

Influence of surface roughness on the tribological properties of HF-CVD diamond coated heat-treatable steel

869

Influence of surface roughness on water- and oil-repellent surfaces coated with nanoparticles

870

Influence of surface segregation on the elastic property of Pt–Ni alloy nanowires

871

Influence of surface state on the optical absorption of isolated nanoscale silver particles

872

Influence of surface stress in the missing row reconstruction of fcc transition metals

873

Influence of surface stress on elastic constants of nanohoneycombs

874

Influence of surface structure modifications on the growth of carbon-nanotubes on the SiC) surfaces

875

Influence of surface structure of SiC nano-sized powder analyzed by X-ray photoelectron spectroscopy on basic powder characteristics

876

Influence of surface structure on surface segregation and alloy properties in (100)- and (311)-oriented InGaAsGaAs heterostructures

877

Influence of surface structure on surface segregation and alloy properties in (100)- and (311)-oriented InGaAsGaAs heterostructures

878

Influence of surface structure on thermoprotection properties of intumescent systems

879

Influence of surface structures, subsurface carbon and hydrogen, and surface alloying on the activity and selectivity of acetylene hydrogenation on Pd surfaces: A density functional theory study

880

Influence of surface temperature and surface modifications on the initial layer growth of para-hexaphenyl on mica (0 0 1)

881

Influence of surface tension implementation in Volume of Fluid and coupled Volume of Fluid with Level Set methods for bubble growth and detachment

882

Influence of surface tension models on the hydrodynamics of wavy laminar falling films in Volume of Fluid-simulations

883

Influence of surface tension on mode-I crack tip field

884

Influence of surface tension, osmotic pressure and pores morphology on the densification of ice-templated ceramics

885

Influence of surface tensions of solvent/nonsolvent mixtures in membrane casting solutions on the performance of poly(2,6-dimethyl-1,4-phenylene) oxide membranes for gas separation applications

886

Influence of surface texture and microhabitat heterogeneity in structuring nodule faunal communities

887

Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate

888

Influence of surface texture on boundary lubricated sliding contacts

889

Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls

890

Influence of surface topography and pore architecture of alkali-treated titanium on in vitro apatite deposition

891

Influence of surface topography in the boiling mechanisms

892

Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditions

893

Influence of surface topography of HF-CVD diamond films on self-mated planar sliding contacts in dry environments

894

Influence of surface topography on frictional properties of Cu surfaces under different lubrication conditions: Comparison of dry, base oil, and ZnS nanowire-based lubrication system

895

Influence of surface topography on osteoblast response to fibronectin coated calcium phosphate thin films

896

Influence of Surface Topography on the Effectiveness of Pulsed Light Treatment for the Inactivation of Listeria innocua on Stainless-steel Surfaces

897

Influence of surface treated fly ash with coupling agent on asphalt mixture moisture damage

898

Influence of surface treatment of elastomers on their frictional behaviour in sliding contact

899

Influence of surface treatment on defiltration of confined liquid in MCM-41

900

Influence of surface treatment on hybrid wollastonite-polyethylene composite resins for rotational moulding

901

Influence of surface treatment on interfacial microstructure and bond strength of diffusion-bonded tin

902

Influence of surface treatment on preparing nanosized TiO2 supported on carbon nanotubes

903

Influence of surface treatment on the electroless nickel plating of textile fabric

904

Influence of surface treatment on the Li doping/undoping reaction at a mesophase low temperature carbon fiber

905

Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic

906

Influence of surface treatments on crystalline germanium heterojunction solar cell characteristics

907

Influence of surface treatments on fatigue life of Al 7010 alloy

908

Influence of surface treatments on microstructure and electrochemical properties of La0.7Mg0.3Ni2.4Co0.6 hydrogen-storage alloy

909

Influence of surface treatments on surface layer properties, fatigue and corrosion fatigue performance of AA7075 T73

910

Influence of surface treatments on the bond strength of repaired resin composite restorative materials

911

Influence of surface treatments on the shear bond strength of orthodontic brackets to porcelain

912

Influence of surface velocity directions on lubricant film formation in EHL point contacts

913

Influence of Surface Viscosity on Two-Dimensional Faraday Waves

914

Influence of surface water activity on freezing/thawing times and weight loss prediction Original Research Article

915

Influence of surface wettability on the accuracy of measurement of fluid shear modulus

916

Influence of surface wettability on the tribological properties of laser textured Co–Cr–Mo alloy in aqueous bovine serum albumin solution

917

Influence of surface wettability on transition of two-phase flow pattern in round mini-channels

918

Influence of surface-active agents on pore characteristics of the generated spherical resorcinol–formaldehyde based carbon aerogels Original Research Article

919

Influence of surface-adhered nanoparticles and nanoporous structure on bulk flowability of silica

920

Influence of surface-adhered nanoparticles and nanoporous structure on particle–particle interaction of silica

921

Influence of surface-capping molecule exchange on the hyper-Rayleigh scattering of CdS nanoparticles

922

Influence of surface-coatings on titanium-alloy resistance to fretting fatigue in cryogenic environment

923

Influence of surface-roughness on indentation size effect Original Research Article

924

Influence of surfactant addition sequence on the suspension properties and electrophoretic deposition behaviour of alumina and zirconia

925

Influence of surfactant and lipid chain length on the solubilisation of phosphatidylcholine vesicles by micelles comprised of polyoxyethylene sorbitan monoesters

926

Influence of surfactant and salts on chemical mechanical planarisation of copper

927

Influence of surfactant composition on physical and oxidative stability of Quillaja saponin-stabilized lipid particles with encapsulated ω-3 fish oil

928

Influence of surfactant distribution on the stability of oil/water emulsions towards flocculation and coalescence

929

Influence of surfactant hydrophobic segment length on the thermodynamic parameters of binary mixed micelles of homologues polysorbates and Triton X-100

930

Influence of surfactant hydrophobicity on the detachment of Escherichia coli O157:H7 from lettuce

931

Influence of surfactant on rheological behaviors of injection–molded alumina suspensions

932

Influence of surfactant on rheological behaviors of injection–molded alumina suspensions

933

Influence of surfactant on the capacitive performance of manganese dioxide prepared at different temperatures

934

Influence of surfactant removal by chemical or thermal methods on structure and electroactivity of Pt/C catalysts prepared by water-in-oil microemulsion

935

Influence of surfactant sorption on the removal of phenanthrene from contaminated soils

936

Influence of surfactant structure on the double inversion of emulsions in the presence of nanoparticles

937

Influence of surfactant structures in luminescence enhancement dynamics during nucleation and growth of aqueous ZnS nanoparticles and their photoactivation due to illumination with UV/visible light

938

Influence of surfactant surface coverage and aging time on physical properties of silica nanoparticles

939

Influence of Surfactant Type, Surfactant Concentration, and Salinity on Interfacial Tension of a Brine/Live Oil/Surfactant Fluid System: A Case Study of Iranian Asmari Oil Reservoir

940

Influence of surfactant upon adsolubilization of hydrophobic organic compounds in fog droplets

941

Influence of surfactant-facilitated interfacial tension reduction on chlorinated solvent migration in porous media: observations and numerical simulation

942

Influence of surfactants on absorption of CO2 in a stirred tank with and without bubbling

943

Influence of surfactants on atomic diffusion

944

Influence of surfactants on electrochemical behavior of zinc electrodes in alkaline solution

945

Influence of surfactants on Fe2O3 nanostructure photoanode

946

Influence of surfactants on porous properties of carbon cryogels prepared by sol–gel polycondensation of resorcinol and formaldehyde Original Research Article

947

Influence of surfactants on solubilization and fungal degradation of fluorene

948

Influence of surfactants on the corrosion inhibition behaviour of 2-aminophenyl-5-mercapto-1-oxa-3,4-diazole (AMOD) on mild steel

949

Influence of surfactants on the morphologies of CaCO3 by carbonation route with compressed CO2

950

Influence of surfactants on the morphology of SnO2 nanocrystals prepared via a hydrothermal method

951

Influence of surfactants on the photophysics of 4,4-diaminodiphenyl sulfone encapsulated in self-assembled nanocage of diblock copolymer

952

Influence of Surfactants on the Removal of AOX Using MicellarEnhanced Ultrafiltration

953

Influence of surfactants on the structure of the adsorption layer in the system: Carboxymethylcellulose/alumina

954

Influence of surgeonʹs experience on speech outcome in cleft lip and palate Original Research Article

955

Influence of surgery on aortic valve prolapse and aortic regurgitation in doubly committed subarterial ventricular septal defect

956

Influence of surgical approach on cancer control following radical prostatectomy

957

Influence of surgical stress and parenteral nutrition on serum leptin concentration

958

Influence of Surgical Therapy on Serum Values of Alpha 1-Antitrypsin in Patients with Head and Neck Tumors

959

Influence of surgical treatment for disc degeneration disease at C5–C6 on changes in some biomechanical parameters of the cervical spine

960

Influence of Surgicel gauze on the incidence of dry socket after wisdom tooth extraction

961

Influence of survey strategy and interpolation model on DEM quality

962

Influence of suspended particle concentration, composition and size on the variability of inherent optical properties of the Southern North Sea

963

Influence of suspended particles on indoor semi-volatile organic compounds emission

964

Influence of suspended particulate matter on salinity measurements

965

Influence of suspended solids and back diffusion on organic contaminant uptake by semi-permeable membranes (SPMDs)

966

Influence of suspension characteristics on coatings microstructure obtained by suspension plasma spraying

967

Influence of suspension concentration on cast formation time in pressure filtration

968

Influence of suspension damper asymmetry on vehicle vibration response to ground excitation

969

Influence of sward height and advancing season on rumen fermentation in Merino sheep grazing grass/white clover pasture

970

Influence of sward maturity and pre-conditioning temperature on the energy production from grass silage through the integrated generation of solid fuel and biogas from biomass (IFBB): 1. The fate of mineral compounds

971

Influence of sward maturity and pre-conditioning temperature on the energy production from grass silage through the integrated generation of solid fuel and biogas from biomass (IFBB): 2. Properties of energy carriers and energy yield

972

Influence of sward structure on daily intake and foraging behaviour by horses

973

Influence of Sweet Potato/Maize Association on Ecological Properties and Crop Yields in Swaziland

974

Influence of sweetened chewing gum on appetite, meal patterning and energy intake

975

Influence of sweeteners on the viscoelasticity of hydrocolloids gelled systems

976

Influence of swelling of vegetable particles on structure and rheology of starch matrices Original Research Article

977

Influence of swelling on water transport through PVA-based membrane

978

Influence of swing leg movement on running stability

979

Influence of swirl number and fuel equivalence ratio on NO emission in an experimental LPG-fired chamber

980

Influence of swirl on the stability of a rod in annular leakage flow

981

Influence of switching conditions on the VFTO magnitudes in a GIS

982

Influence of switching-waveform characteristics on the performance of a single-layer-phase switched

983

Influence of Syllable Train Length and Performance End Effects on Estimation of Phonation Threshold Pressure

984

Influence of syllable-coda voicing on the acoustic properties of syllable-onset /l/ in English

985

Influence of symmetric benzene–polycarboxylate acids on the structures of silver-aminopyrimidyl derivative system

986

Influence of sympathetic activation on the control of masticatory movements

987

Influence of sympathetic autonomic arousal on tics: Implications for a therapeutic behavioral intervention for Tourette syndrome

988

Influence of sympathetic tone on heart rate during vagal stimulation and nitroprusside induced hypotension in ovine fetus

989

Influence of Symptoms and Age on the Predictive Value of Coronary Artery Calcium Scanning

990

Influence of synbiotic containing Lactobacillus acidophilus La5, Bifidobacterium lactis Bb 12, Streptococcus thermophilus, Lactobacillus bulgaricus and oligofructose on gut barrier function and sepsis in critically ill patients: a randomised controlled tr

991

Influence of synergistic effect on the selective catalytic reduction process NOx−CnHm/O2 on zeolites

992

Influence of syngas composition on the transient behavior of a Fischer–Tropsch continuous slurry reactor

993

Influence of synoptic and mesoscale meteorology on ozone pollution potential for San Joaquin Valley of California

994

Influence of synoptic weather conditions on the aerosol size distribution at the high-alpine site Jungfraujoch

995

Influence of synthesis and calcination temperatures on particle size and ethanol sensing behaviour of chemically synthesized SnO2 nanostructures

996

Influence of synthesis and sintering parameters on the characteristics of carbonate apatite

997

Influence of synthesis condition on product formation: hydrothermal auto-oxidated synthesis of five copper halides with ratio of Cu(I)/Cu(II) in 1:1, 2:1, 3:1, 4:1 and 1:0

998

Influence of synthesis conditions on structural properties of MCM-48 Original Research Article

999

Influence of synthesis conditions on the electrochemical properties of nanostructured amorphous manganese oxide cryogels

1000

Influence of synthesis conditions on the microstructure of Li–Ta–Ti–O microsheets by molten salt method