<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Analysis and design of co-operative work processes: a framework
2
Analysis and design of current regulators using complex vectors
3
Analysis and Design of Direct Power Control (DPC) for a Three Phase Synchronous Rectifier via Output Regulation Subspaces
4
Analysis and design of discrete linear control systems : By Vladimir Ku era. Prentice-Hall International, Hemel Hempstead, U.K. (1991). ISBN 0-13-033085-X
5
Analysis and design of discrete-time linear systems with nested actuator saturations
6
Analysis and Design of Distributed Pair Programming System
7
Analysis and design of down-aisle pallet rack structures
8
ANALYSIS AND DESIGN OF DUAL BAND HIGH DIRECTIVE EBG RESONATOR ANTENNA USING SQUARE LOOP FSS AS SUPERSTRATE LAYER
9
Analysis and design of dye-sensitized solar cell
10
Analysis and design of electronic transformers for electric power distribution system
11
Analysis and Design of ETL in Hospital Performance Appraisal System
12
Analysis and Design of Evapotranspirative Cover for Hazardous Waste Landfill
13
Analysis and design of flashtubes for pressure letdown in autoclave leaching operations
14
Analysis and design of flat-die hot extrusion process 1. Three-dimensional finite element analysis
15
Analysis and design of flat-die hot extrusion process 1. Three-dimensional finite element analysis
16
Analysis and design of flat-die hot extrusion process 1. Three-dimensional finite element analysis
17
Analysis and design of focused demand chains
18
Analysis and design of FRP composites for seismic retrofit of infill walls in reinforced concrete frames
19
Analysis and design of full-order flux observers for sensorless induction motors
20
Analysis and Design of Furrow Irrigation Systems
21
Analysis and design of fuzzy control systems using dynamic fuzzy global models
22
Analysis and design of fuzzy control systems using dynamic fuzzy-state space models
23
Analysis and design of fuzzy controller and fuzzy observer
24
Analysis and design of fuzzy reduced-dimensional observer and fuzzy functional observer
25
Analysis and design of gain scheduled sampled-data control systems
26
Analysis and design of H/sub (infinity)/ control of nonminimum phase-switching converters
27
Analysis and design of haptic telerobotic system
28
Analysis and design of hierarchical fuzzy systems
29
Analysis and Design of High Efficiency Matching Networks
30
Analysis and Design of High Gain, and Low Power CMOS Distributed Amplifier Utilizing a Novel Gain-cell based on Combining Inductively Peaking and Regulated Cascode Concepts
31
Analysis and Design of High Speed 4-2 Compressor in CMOS Technology for High Speed Multipliers
32
Analysis and Design of High Speed 4-2 Compressor in CMOS Technology for High Speed Multipliers
33
ANALYSIS AND DESIGN OF HIGHLY COMPACT BANDPASS WAVEGUIDE FILTER USING COMPLEMENTARY SPLIT RING RESONATORS(CSRR)
34
Analysis and design of hydroforming processes by the rigid–plastic finite element method
35
Analysis and design of impulsive control systems
36
Analysis and Design of Integral Sliding Manifolds for Systems With Unmatched Perturbations.
37
Analysis and design of integrated circuit antenna modules [Book Review]
38
Analysis and design of integrated optical mirrors in planar waveguide technology
39
Analysis and design of internal web structure of laser stereolithography patterns for investment casting
40
Analysis and design of lapped connections between cold-formed steel Z sections
41
Analysis and Design of Low-density Polyethylene Greenhouse Films
42
Analysis and Design of Low-Distortion CMOS Source Followers
43
Analysis and design of membrane structures: Results of a round robin exercise
44
Analysis and design of microwave resonant plasma source for Iranian Space Plasma Simulation Chamber
45
Analysis and design of minimax-optimal interpolators
46
Analysis and design of multilayer structures for neutron monochromators and supermirrors
47
Analysis and design of multilayer structures for neutron monochromators and supermirrors
48
ANALYSIS AND DESIGN OF MULTIPLE-BAND BANDSTOP FILTERS
49
Analysis and design of negative impedance LC oscillators using bipolar transistors
50
ANALYSIS AND DESIGN OF NEW ACTIVE QUASI CIRCULATOR AND CIRCULATORS
51
Analysis and design of non-dissipative active clamp for forward converters
52
Analysis and design of nonlinear dynamical systems using mathematica Original Research Article
53
Analysis and design of OFDM/OQAM systems based on filterbank theory
54
Analysis and design of oscillatory control systems
55
Analysis and design of parallel-connected peak-current-mode-controlled switching DC/DC power supplies
56
Analysis and design of passive band-stop filter-type vibration isolators for low-frequency applications
57
Analysis and design of passive low-pass filter-type vibration isolators considering stiffness and mass limitations
58
Analysis and design of PEM fuel cells
59
Analysis and design of phase shift full bridge converter with series-connected two transformers
60
Analysis and design of pod silencers
61
Analysis and design of power gyrators in sliding-mode operation
62
Analysis and Design of Printed Fractal Antennas by Using an Adequate Electrical Model
63
Analysis and design of pultruded FRP shapes under bending
64
Analysis and design of rank-based classifiers
65
Analysis and Design of Retaining Wall having Reinforced Cohesive Frictional Backfill
66
Analysis and design of robust adaptive control for nonlinear output feedback systems under disturbances with unknown bounds
67
Analysis and design of rolling-contact joints for evaluating bone plate performance
68
Analysis and design of sandwich plates with inserts—a high-order sandwich plate theory approach
69
Analysis and design of self-balancing production line
70
Analysis and design of sequencing rules for car sequencing
71
Analysis and design of servomechanism and its application to disk drives
72
Analysis and design of singular linear systems under actuator saturation and disturbances
73
Analysis and design of sliding mode controller gains for boost power factor corrector
74
Analysis and design of software ecosystem architectures – Towards the 4S telemedicine ecosystem
75
Analysis and design of spherical microphone arrays
76
Analysis and Design of STATCOM-Based Voltage Regulator for Self-Excited Induction Generators
77
ANALYSIS AND DESIGN OF SUITABLE MODEL STRUCTURES FOR ACTIVATED SLUDGE TANKS WITH CIRCULATING FLOW
78
ANALYSIS AND DESIGN OF SUITABLE MODEL STRUCTURES FOR ACTIVATED SLUDGE TANKS WITH CIRCULATING FLOW
79
Analysis and design of switched normal systems Original Research Article
80
Analysis and design of synchronous permanent-magnet planar motors
81
Analysis and design of the Alfven wave antenna system for the SUNIST spherical tokamak
82
Analysis and design of the beryllium tiles for the JET ITER-like wall project
83
Analysis and design of the flexible composite membrane stretched on the spacecraft solar array frame
84
Analysis and design of the general and outmost-ring stiffened suspen-dome structures
85
Analysis and design of the prototype of a steel 1-MW wind turbine tower
86
Analysis and design of the virtual rate control algorithm for stabilizing queues in TCP networks
87
Analysis and design of time-variant fuzzy systems based on dynamic fuzzy inference
88
Analysis and Design of Turns in α-Helical Hairpins Original Research Article
89
Analysis and design of two types of digital repetitive control systems
90
Analysis and design of two-arm conical spiral antennas
91
ANALYSIS AND DESIGN OF WATER DISTRIBUTION SYSTEMS VIA COLLIDING BODIES OPTIMIZATION
92
Analysis and design of watermarking algorithms for improved resistance to compression
93
Analysis and design optimization of an improved axially magnetized tubular permanent-magnet machine
94
Analysis and design optimization of deep drawing process: Part II: Optimization
95
Analysis and Design Procedure for FRP-Strengthened Prestressed Concrete T-Girders Considering Strength and Fatigue
96
Analysis and Design Procedure of Corner Gusset Plate Connection in BRBFs
97
Analysis and design reliability of axially compressed members with high-strength cold-formed thin-walled steel
98
Analysis and detection of incident light attenuation with a continuous flow injection by using the precipitating reaction of fluconazole and phosphomolybidic acid by NAG4SX3-3D instrument
99
Analysis and detection of MPEG-4 visual transmission errors over error-prone channels
100
ANALYSIS AND DETECTION OF RETINAL MICROVASCULAR NETWORK: A COMPARATIVE STUDY
101
Analysis and determination of oestrogen-active compounds in fructus amomi by the combination of high-speed counter-current chromatography and high performance liquid chromatography
102
Analysis and development of subgrid turbulence models preserving the symmetry properties of the Navier–Stokes equations
103
Analysis and Development of Technology Acceptance Model in Mobile Bank Field
104
Analysis and development of the angular twist type torque-meter
105
Analysis and development of the angular twist type torque-meter
106
Analysis and Development of the Generic Maintenance Management Process Modeling for the Preservation of Heritage School Buildings
107
Analysis and diagnosis of basal cell carcinoma (BCC) via infrared imaging
108
Analysis and diagnostic testing of a bridge
109
Analysis and die design of flat-die hot extrusion process 2. Numerical design of bearing lengths
110
Analysis and die design of flat-die hot extrusion process 2. Numerical design of bearing lengths
111
Analysis and die design of flat-die hot extrusion process 2. Numerical design of bearing lengths
112
Analysis and dimensional synthesis of the DELTA robot for a prescribed workspace
113
Analysis and direct calculation of the energy migration interaction parameter in high concentration Nd3+ doped YAG laser crystal
114
Analysis and direct quantification of Saccharomyces cerevisiae and Hanseniaspora guilliermondii populations during alcoholic fermentation by fluorescence in situ hybridization, flow cytometry and quantitative PCR Original Research Article
115
Analysis and discretization of an optimal control problem for the time-periodic MHD equations
116
Analysis and downscaling multi-model seasonal forecasts in Peru using self-organizing maps
117
Analysis and DSP implementation of an ANC system using a filtered-error neural network
118
Analysis and dynamic modeling of a moraine failure and glacier lake outburst flood at Ventisquero Negro, Patagonian Andes (Argentina)
119
Analysis and efficient implementation of a linguistic fuzzy c-means
120
Analysis and elimination of boundary reflections in transmission holograms
121
Analysis and elimination of the distortion in electro-optic measurement of low-energy subpicosecond electron bunches
122
Analysis and elimination of the distortion in electro-optic measurement of low-energy subpicosecond electron bunches
123
Analysis and elimination of the stretcher strains on TH415 tinplate rings in the stamping process
124
Analysis and enhancement of astaxanthin accumulation in Haematococcus pluvialis
125
Analysis and enhancement of TCP Vegas congestion control in a mixed TCP Vegas and TCP Reno network scenario
126
Analysis and Enhancements to Piecewise Linear Comparametric Image Registration
127
Analysis and environmental concentrations of the herbicide dichlobenil and its main metabolite 2,6-dichlorobenzamide (BAM): A review Review Article
128
Analysis and establishment of bus rapid transit (BRT) on customer satisfaction in Tehran
129
Analysis and estimate of the influence of the leakage inductance of the charging transformer primary on the amplitude stability of the PFN charging voltage
130
Analysis and estimate of the influence of the leakage inductance of the charging transformer primary on the amplitude stability of the PFN charging voltage
131
Analysis and estimation of cutting-temperature distribution during end milling in relation to orthopedic surgery
132
Analysis and estimation of motion transmission errors of a timing belt drive
133
Analysis and estimation of sampling error using continuous emission monitoring instruments
134
Analysis and estimation of soil moisture at the catchment scale using EOFs
135
Analysis and Estimation of Tracking Errors of Plug-in Type Repetitive Control Systems.
136
Analysis and evaluation in a welding process applying a Redesigned Radial Basis Function
137
Analysis and evaluation of a biomedical polycarbonate urethane tested in an in vitro study and an ovine arthroplasty model. Part I: materials selection and evaluation
138
Analysis and evaluation of a biomedical polycarbonate urethane tested in an in vitro study and an ovine arthroplasty model. Part II: in vivo investigation
139
Analysis and evaluation of a general camera model
140
Analysis and Evaluation of a Group of Early Roman Textiles from Vindolanda, Northumberland
141
Analysis and evaluation of a multiple gateway traffic-distribution scheme for gateway clusters
142
Analysis and Evaluation of a Voice-Training Program in Future Professional Voice Users
143
Analysis and evaluation of an Assemble-to-Order system with batch ordering policy and compound Poisson demand
144
Analysis and Evaluation of Charge-Balancing Circuits on Performance, Reliability, and Lifetime of Supercapacitor Systems
145
Analysis and evaluation of debonding of reinforced concrete beams
146
Analysis and evaluation of development based on holographic pattern (A case study: Amol)
147
Analysis and evaluation of distance-to-mean broadcast method for VANET
148
Analysis and evaluation of distributed checkpoint algorithms to avoid rollback propagation
149
Analysis and Evaluation of Effective Environmental Indicators in the Heat Island of District 1 of Tehran using (RS)
150
Analysis and evaluation of expiration-based hierarchical caching systems
151
Analysis and evaluation of hybrid scooter transmission systems
152
Analysis and Evaluation of Hydroxytyrosol in Olive Leaf Extract
153
Analysis and Evaluation of Increasing the Throughput of Processors by Eliminating the Lobe’s Disorder
154
Analysis and evaluation of interleaving techniques in forward converters
155
Analysis and Evaluation of Navigation Structure of the Websites of Central Libraries of Iranian Public Universities Accredited by MSRT
156
Analysis and Evaluation of Privacy Protection Behavior and Information Disclosure Concerns in Online Social Networks
157
Analysis and Evaluation of Privacy Protection Behavior and Information Disclosure Concerns in Online Social Networks
158
Analysis and evaluation of SECOS, a protocol for energy efficient and secure communication in sensor networks
159
Analysis and evaluation of selected local-scale PM10 air pollution episodes in four European cities: Helsinki, London, Milan and Oslo
160
Analysis and evaluation of selected PM10 pollution episodes in the Helsinki Metropolitan Area in 2002
161
Analysis and evaluation of soundscapes in public parks through interviews and measurement of noise Original Research Article
162
ANALYSIS AND EVALUATION OF SOURCES OF INVESTMENT IN AUTOMOTIVE TRANSPORTI ENTERPRISES
163
Analysis and Evaluation of Techniques for Myocardial Infarction Based on Genetic Algorithm and Weight by SVM
164
Analysis and evaluation of the drop in the groundwater level of Khorram Abad plain
165
Analysis and evaluation of the establishment and maintenance of paths in a MANET used for industrial process monitoring
166
Analysis and Evaluation of the Formation of a Heat Island in Tehran During Three Decades
167
Analysis and Evaluation of the Role and Performance of the Executive Elite in Development with Emphasis on the Development of the Tourism Industry
168
Analysis and Evaluation of the Role of Mass Media on Urban Branding in Tourism
169
Analysis and Evaluation of the Science and Technology Parks Portals in Tehran Based on the K-ACT Model
170
Analysis and Evaluation of the Technical and Economic Application of RFID, GPS and GIS in Road Transportation
171
Analysis and Evaluation of Trace Elements in Iranian Olive Samples Using ICP-OES
172
Analysis and Evaluation of Traffic Congestion Control Methods in Touristic Metropolis Using Analytical Hierarchy Process (AHP)
173
Analysis and evaluation of uniformity of SWIR InGaAs FPA – Part II: Processing issues and overall effects
174
Analysis and evaluation of uniformity of SWIR InGaAs FPA—Part I: Material issues
175
Analysis and evaluation of various aspects of solar radiation in the Palestinian territories
176
Analysis and evaluation of voluntary folic acid fortification of breakfast cereals in the Spanish market
177
Analysis and evaluation of voluntary folic acid fortification of breakfast cereals in the Spanish market
178
Analysis and Evaluations of Logical Instructions Called in Parallel Digital Optical Operations Based on Optical Array Logic
179
Analysis and Examination of the Monotheistic Society Characteristics in the Thought of Ayatollah Khamenei
180
Analysis and experiment of capillary valves for microfluidics on a rotating disk
181
Analysis and experiment on transient dynamic response in finite mindlin plate
182
Analysis and experimental results of a single-stage high-power-factor electronic ballast based on flyback converter
183
Analysis and experimental results on ingress of coolant event in vacuum vessel
184
Analysis and experimental study of MIMO control in refrigeration system
185
Analysis and experimental study of one-photon incubated absorption in polymers
186
Analysis and experimental testing of a built-up composite cross arm in a transmission line tower for mechanical performance
187
Analysis and Experimental Verification of a Linear Switched Reluctance Motor Having Special Pole Shape
188
Analysis and experimental verification of an improved cooling radiator
189
Analysis and experimental verification of the competing degradation mechanisms for solder joints under electron current stressing Original Research Article
190
Analysis and experimentation of nonlinear adaptive controllers for the series resonant converter
191
ANALYSIS and EXPERIMENTATION OF SOFT SWITCHED INTERLEAVED BOOST CONVERTER FOR PHOTOVOLTAIC APPLICATIONS
192
Analysis and experiments of a waveguide postʹs influence on photocathode RF gun
193
Analysis and experiments of a waveguide postʹs influence on photocathode RF gun
194
Analysis and explanation of the foundations of "cognitive-philosophical value" of the national curriculum Emphasizing the "concept of morality" and presenting a "conceptual-educational" model of appraisal of the program
195
Analysis and Exploration of the Use of Rule-Based Algorithms and Consensus Methods for the Inferral of Haplotypes
196
Analysis and extension of decision trees based on imprecise probabilities: Application on noisy data
197
Analysis and fate of aliphatic hydrocarbons, linear alkylbenzenes, polychlorinated biphenyls and polycyclic aromatic hydrocarbons in sewage sludge-amended soils
198
Analysis and feasibility of implementing solar chimney power plants in the Mediterranean region
199
Analysis and field tests on the performance of composite tubes under pile driving impact
200
Analysis and finite element approximation of a Ladyzhenskaya model for viscous flow in streamfunction form
201
Analysis and finite element approximation of an optimal control problem for the Oseen viscoelastic fluid flow
202
Analysis and finite element approximation of optimal control problems for a Ladyzhenskaya model for stationary, incompressible, viscous flows
203
Analysis and finite element approximations for distributed optimal control problems for implicit parabolic equations
204
Analysis and finite element simulation of the tube bulge hydroforming process
205
Analysis and finite element simulations of the near-tip singular fields around a mode-3 stationary crack in plastically graded materials
206
Analysis and Flexible Structural Modeling for Oscillating Wing Utilizing Aeroelasticity
207
Analysis and Follow up of Endoscopy Results in 1099 Patients with Terminal Ileum Lesions
208
Analysis and Forecast of Mining Accidents in Pakistan
209
Analysis and forecast of Pontic shad (Alosa immaculata) catch in the Danube River
210
Analysis and forecasting of nonresidential electricity consumption in Romania
211
Analysis and forecasting of the particulate matter (PM) concentration levels over four major cities of China using hybrid models
212
Analysis and Forecasting the Accident Mortality Trends in the Islamic Republic of Iran Applying Lee-Carter Model During the Years 2006 to 2035
213
Analysis and formation of trans fatty acids in hydrogenated soybean oil during heating
214
Analysis and FPGA Realization of a Pulse Width Modulator Based on Voltage Space Vectors
215
Analysis and future outlook of natural gas consumption in the Italian residential sector
216
Analysis and future trend of short-circuit power
217
Analysis and generation of control and observation structures for analog circuits
218
Analysis and generic properties of gene regulatory networks with graded response functions
219
Analysis and Geometry on Configuration Spaces
220
Analysis and Geometry on Configuration Spaces: The Gibbsian Case
221
Analysis and guidelines to obtain a good uniform fuzzy partition granularity for fuzzy rule-based systems using simulated annealing Original Research Article
222
Analysis and health effects of flavonoids
223
Analysis and Health Risk Assessment of Arsenic and Zinc in Ghee Consumed in Kermanshah City, Western Iran using Atomic Absorption Spectrometry
224
Analysis and heuristics for the characterization of selective repeat ARQ delay statistics over wireless channels
225
Analysis and high-resolution modeling of a dense sea fog event over the Yellow Sea
226
Analysis and hindcast simulations of an extreme rainfall event in the Mediterranean area: The Genoa 2011 case
227
Analysis and IbM simulation of the stages in bacterial lag phase: Basis for an updated definition
228
Analysis and identification by paramagnetic resonance spectroscopy
229
Analysis and identification of a social interaction model
230
Analysis and Identification of Putative Novel Peptides Purified from Iranian Endemic Echis Carinatus Sochureki Snake Venom by MALDI-TOF Mass Spectrometry
231
Analysis and Identification of Rare and Prevalent Breakpoints in Chromosomal rearrangements in Adult and Pediatric with B-Acute Lymphoblastic Leukemia (B-ALL): A Systematic Review
232
Analysis and identification of several apple varieties using ISFETs sensors
233
Analysis and identification of two reconstituted tobacco sheets by three-level infrared spectroscopy
234
Analysis and Implementation of a CMOS Even Harmonic Mixer With Current Reuse for Heterodyne/Direct Conversion Receivers
235
Analysis and implementation of a delay-compensated deadbeat current controller for solar inverters
236
Analysis and Implementation of a High Efficiency, Interleaved Current-Fed Full Bridge Converter for Fuel Cell System
237
Analysis and implementation of a new constant acceleration subcycling algorithm
238
Analysis and Implementation of a New Method to Increase the Efficiency of Photovoltaic Cells by Applying a Dual Axis Sun Tracking System and Fresnel Lens Array
239
Analysis and implementation of a single-phase capacitor-clamped inverter with simple structure
240
Analysis and implementation of a soft switching interleaved forward converter with current doubler rectifier
241
Analysis and implementation of a three-level active filter with a reduced number of power semiconductors
242
Analysis and implementation of a three-phase four-wire switching mode rectifier based on a switch-clamped scheme
243
Analysis and implementation of a three-phase two-leg neutral point clamped converter based on space vector PWM for power factor correction
244
Analysis and implementation of a zero-voltage switching forward converter with a synchronous rectifier
245
Analysis and implementation of an active snubber dc/dc converter with series¿parallel connection in primary and secondary sides
246
Analysis and implementation of an adaptative PV based battery floating charger
247
Analysis and implementation of an electronic load controller for a self-excited induction generator
248
Analysis and implementation of full-bridge converter with current doubler rectifier
249
Analysis and Implementation of Model-Based Linear Estimation of Dynamic Phasors
250
Analysis and Implementation of Optimization Techniques for Facial Recognition
251
Analysis and Implementation of Practical, Cost-Effective Networks on Chips
252
Analysis and Implementation of Resilient Modulus Models for Granular Solids
253
Analysis and Implementation of Second-Order Step-Up Converter Using Winding Cross Coupled Inductors for Photovoltaic Applications
254
Analysis and implementation of soft switching converter with series-connected transformers
255
Analysis and implementation of the BOM of a tree-type structure in MRPII
256
Analysis and implementation of the solar tree by determining the optimal angle in Shiraz-Iran
257
Analysis and implementation of three-phase power quality compensator under the balanced and unbalanced load conditions
258
Analysis and implementation of TR-BDF2 Original Research Article
259
Analysis and implementation of ZVS forward converter with centre-tapped rectifier
260
Analysis and implications of aircraft disinsectants
261
Analysis and implications of challenges in achieving the targets of EU RES-E directive
262
ANALYSIS AND IMPROVED DESIGN OF DIRECT-DRIVE CORELESS AFPM IN-WHEEL MACHINE FOR HEV APPLICATION
263
Analysis and improvement of a chaos-based Hash function construction
264
Analysis and improvement of a hash-based image encryption algorithm
265
Analysis and improvement of blasting operation in porphyry, diorite dyke, and trachyte Sungun zones: In-situ investigations
266
Analysis and improvement of cyclic stability of H2 sensing properties of Pd/Mg–Ni films
267
Analysis and improvement of delivery operations at the San Francisco Public Library
268
Analysis and improvement of die design for the processing of extruded plastic pipes
269
Analysis and improvement of ionospheric thin shell model used in SBAS for China region Original Research Article
270
ANALYSIS AND IMPROVEMENT OF THE DOUBLY FED INDUCTION GENERATOR DURING GRID VOLTAGE FAULTS
271
Analysis and improvement of the noise immunity in a single-chip super-regenerative transceiver
272
Analysis and improvements of global–local enrichments for the Generalized Finite Element Method
273
Analysis and improvements of the DPN acceleration technique for the method of characteristics in unstructured meshes
274
Analysis and Improving the Security of the Scalar Costa Scheme against Known Message Attack
275
Analysis and insights from a dynamical model of nuclear plant safety risk
276
Analysis and insights from a dynamical model of nuclear plant safety risk
277
Analysis and inspection of road traffic using image processing Original Research Article
278
Analysis and integration of fuel cell combined cycles for development of low-carbon energy technologies
279
Analysis and integration of geo-information to identify granitic intrusions as exploration targets in southeastern Yunnan District, China
280
Analysis and inter-comparison of energy yield of wind turbines in Pakistan using detailed hourly and per minute recorded data sets
281
Analysis and interpretation of 18 years of mercury observations since 1996 at Mace Head, Ireland
282
Analysis and interpretation of 25 years of ozone observations at the Mace Head Atmospheric Research Station on the Atlantic Ocean coast of Ireland from 1987 to 2012
283
Analysis and interpretation of a test for characterizing the response of sandwich panels to water blast
284
Analysis and interpretation of air quality data from an urban roadside location in Central London over the period from July 1991 to July 1992
285
Analysis and interpretation of anomalous conductivity and magnetic permeability effects in time domain electromagnetic data Part I: Numerical modeling
286
Analysis and interpretation of anomalous conductivity and magnetic permeability effects in time domain electromagnetic data Part II: Sm-inversion
287
Analysis and Interpretation of Bearing Vibration Data Using Principal Component Analysis and Self-Organizing Map
288
Analysis and interpretation of Cassini Titan radar altimeter echoes
289
Analysis and interpretation of Landsat synthetic stereo pair for the detection of active fault zones in the Abruzzi region (Central Italy)
290
Analysis and interpretation of measurements of suspended particulate matter at urban background sites in the United Kingdom
291
Analysis and interpretation of neuropsychologic tests in cardiac surgery
292
Analysis and interpretation of refractory microstructures in studies of corrosion mechanisms by liquid oxides
293
Analysis and interpretation of the aftershock sequence of the August 17, 1999, Izmit (Turkey) earthquake
294
Analysis and interpretation of the continuous hourly monitoring data for 26 C2–C8 hydrocarbons at 12 United Kingdom sites during 1996
295
Analysis and interpretation of the full set (2000–2002) of TCS tests in conductor 1A of the ITER Central Solenoid Model Coil Original Research Article
296
Analysis and interpretation of the Islamic Republic of Iran’s votes at the Court of Arbitration for Sport (CAS)
297
Analysis and interpretation of the October 21, 1766 earthquake in the Southeastern Caribbean
298
Analysis and investigate the component affecting the improvement of apple marketing in West Azerbaijan province
299
Analysis and Investigation of Disturbance in Radar Systems using New Techniques of Electronic Attack
300
Analysis and investigation of the communication structure in literatureIntroducing the structure of communication-promotion in Masnavi-Manavi
301
Analysis and investigation of the role of brand in keeping and increasing purchase portfolio of customers of air freshener industries in Pars Rayehe Saz Company in Iran
302
Analysis and investigation of the status of saffron packaging and its position in Iran exports from exporters and experts viewpoints (case study: Torbatjam township)
303
Analysis and its discontents: Nonlinearity and the way things aren’t
304
Analysis and laboratory simulation of an industrial polishing process for porcelain ceramic tiles
305
Analysis and leaching characteristics of mercury and arsenic in Chinese medicinal material Original Research Article
306
Analysis and load carrying behaviour of imperfection sensitive shells
307
Analysis and localization of epileptic events using wavelet packets
308
Analysis and manufacturing of ShenGuangIII facility target chamber
309
ANALYSIS AND MAPPING OF CLIMATE CHANGE RISK AND VULNERABILITY IN CENTRAL RIFT VALLEY OF ETHIOPIA
310
Analysis and mapping of the HDD, CDD and temperatures for southern Caspian Sea (CS) Based Model EH5OM
311
Analysis and mapping of the HDD, CDD and temperatures for southern Caspian Sea (CS) Based Model EH5OM
312
Analysis and mapping of the orientation error of a 3-DOF translational parallel manipulator
313
Analysis and mass spectrometric characterization of the insect repellent Bayrepel and its main metabolite Bayrepel-acid
314
Analysis and mathematical modelling of elevated temperature flow behaviour of austenitic stainless steels
315
Analysis and measurement of fault coverage in a combined ATE and BIST environment
316
Analysis and measurement of FM click rate in fast Rician fading channel
317
ANALYSIS AND MEASUREMENT OF SOUND TRANSMISSION THROUGH A DOUBLE-WALLED CYLINDRICAL SHELL
318
Analysis and measurement of timing jitter induced by radiated EMI noise in automatic test equipment
319
Analysis and measurements of mixing in pressure-driven microchannel flow
320
Analysis and minimization of cell voltage in electro-organic syntheses using the solid polymer electrolyte technology
321
Analysis and minimization of input ripple current in PWM inverters for designing reliable fuel cell power systems
322
Analysis and minimization of void formation during resin transfer molding process
323
Analysis and Mining of Educational Data for Predicting the Performance of Students
324
Analysis and Mitigation of Current Unbalance Due to Induction in Heavily Loaded Multicircuit Power Lines
325
Analysis and mitigation of seismic pounding of a slender R/C bell tower
326
Analysis and mitigation of voltage disturbances at an industrial customerʹs corporate campus
327
Analysis and modeling for a turbulent convective plume
328
Analysis and modeling for flexible joint interfaces under micro and macro scale
329
Analysis and modeling for time-dependent behavior of polymers exhibited in nanoindentation tests
330
Analysis and modeling of a threshold based priority queueing system
331
Analysis and modeling of a two-phase jet pump of a thermal management system for aerospace applications
332
Analysis and modeling of a two-phase jet pump of a thermal management system for aerospace applications
333
Analysis and modeling of a two-phase jet pump of a thermal management system for aerospace applications
334
Analysis and modeling of a voltage doubler rectifier fed by a piezoelectric transformer
335
Analysis and Modeling of Absenteeism Management in Iran Revenue Tax Agency Using Mixed Method
336
Analysis and Modeling of AC and DC Micro-Grids for Prosumer Based Implementation
337
Analysis and modeling of active occupancy of the residential sector in Spain: An indicator of residential electricity consumption
338
Analysis and modeling of aerothermal radiation based on experimental data
339
Analysis and Modeling of Air-Gap and Zigzag Leakage Fluxes in a Surface-Mounted Permanent-Magnet Machine
340
Analysis and Modeling of Atmospheric Gravity Waves Observed in RADARSAT SAR Images
341
Analysis and Modeling of Boundary Layer Separation Method (BLSM)
342
Analysis and modeling of building thermal response to investigate the e ect of boundary conditions
343
Analysis and modeling of char particle combustion with heat and multicomponent mass transfer
344
Analysis and modeling of contourite drifts and contour currents off promontories in the Italian Seas (Mediterranean Sea)
345
ANALYSIS AND MODELING OF EDUCATION PARTICIPATION INDEX (EPI) IN INDONESIA FROM 2003-2008
346
Analysis and modeling of effective temperature differences and electrical parameters of thermoelectric generators
347
Analysis and modeling of factor determinants of food provision at consumer market of Ukraine
348
Analysis and modeling of flexural deformation of laminated steel
349
Analysis and modeling of flexural deformation of laminated steel
350
Analysis and modeling of flooding in urban drainage systems
351
Analysis and modeling of heaping behavior of granular mixtures within a computational mechanics framework
352
Analysis and modeling of impulsive noise in broad-band powerline communications
353
Analysis and modeling of mesophase sphere generation, growth and coalescence upon heating of a coal tar pitch Original Research Article
354
Analysis and modeling of multivariate chaotic time series based on neural network
355
Analysis and modeling of peak-current-mode-controlled buck converter in DICM
356
Analysis and modeling of PEM fuel cell stack performance: Effect of in situ reverse water gas shift reaction and oxygen bleeding
357
Analysis and modeling of phase contrast radiography of gradient density laser targets
358
Analysis and modeling of phase contrast radiography of gradient density laser targets
359
Analysis and modeling of potassium sorbate diffusion through edible whey protein films Original Research Article
360
Analysis and modeling of quasi-stationary multivariate time series and their application to middle latency auditory evoked potentials
361
Analysis and modeling of rail maintenance costs
362
Analysis and modeling of soil conservation measures in the Three Gorges Reservoir Area in China
363
ANALYSIS AND MODELING OF SOLAR EVAPORATOR-COLLECTOR
364
Analysis and modeling of spatial correlation structure in small-scale rainfall in Central Oklahoma
365
Analysis and Modeling of Surface Waviness Inspection with Light Reflection, Part 1: Laser Beam Scanning Method
366
Analysis and Modeling of Surface Waviness Inspection with Light Reflection, Part 1: Laser Beam Scanning Method
367
Analysis and Modeling of Surface Waviness Inspection with Light Reflection, Part 2: Back-Lighted Grid Method
368
Analysis and Modeling of Surface Waviness Inspection with Light Reflection, Part 2: Back-Lighted Grid Method
369
Analysis and Modeling of Surface Waviness Inspection with Light Reflection, Part 3: Light Intensity Distribution Method
370
Analysis and Modeling of Surface Waviness Inspection with Light Reflection, Part 3: Light Intensity Distribution Method
371
Analysis and Modeling of the Hydro-Mechanical Behavior of Ain El Hammam Landslide, Algeria
372
Analysis and modeling of the mechanical properties of novel thermotropic polymer biomaterials
373
Analysis and modeling of the steady state behavior of the static Kramer induction generator
374
Analysis and modeling of World Wide Web traffic for capacity dimensioning of Internet access lines
375
Analysis and Modeling of Yield, CO2Emissions, and Energy for Basil Production in Iran using Artificial Neural Networks
376
ANALYSIS AND MODELISATION OF SHORT CRACK GROWTH BY DUCTILE FRACTURE MICROMECHANISMS
377
Analysis and modelling of a broadband fiber access network with high peer-to-peer traffic load
378
Analysis and modelling of a phase change storage system for air conditioning applications
379
ANALYSIS AND MODELLING OF COMPLEX DECISION SITUATIONS
380
Analysis and modelling of fatigue failure of friction stir welded aluminum alloy single-lap joints
381
Analysis and modelling of gravity- and piston coring based on soil mechanics
382
Analysis and modelling of high power laser beam position sensing
383
Analysis and modelling of overtone singing in the sygyt style
384
Analysis and modelling of solid flow in a closed loop circulating fluidized bed with secondary air injection
385
Analysis and modelling of the aeromagnetic anomalies of Gran Canaria (Canary Islands)
386
Analysis and modelling of the Bohai sea ecosystem—a joint German–Chinese study
387
Analysis and Modelling of the Effects of Water Stress on Maize Growth and Yield in Dryland Conditions
388
Analysis and modelling of the in-plane shear behaviour of hollow brick masonry panels
389
Analysis and modelling of the pollutant emissions from European cars regarding the driving characteristics and test cycles
390
Analysis and Modelling of the Relationship between Stopped and Control Delays by Differential Evolution Algorithm
391
Analysis and modelling of the turbulent diffusion of turbulent heat fluxes in natural convection
392
Analysis and modelling of water and near water temperatures in flooded rice (Oryza sativa L.)
393
Analysis and modelling of water and near water temperatures in flooded rice (Oryza sativa L.)
394
Analysis and modelling of water based bubble pump at atmospheric pressure
395
Analysis and modelling of wicking through carton liquid packaging Original Research Article
396
Analysis and modelling of wind speed in New York
397
Analysis and modelling the reverse characteristic of photovoltaic cells
398
Analysis and models of bilateral investment treaties using a social networks approach
399
Analysis and Modification of Thiols in the Hemolymph Juvenile Hormone Binding Protein of Manduca sexta
400
Analysis and modification of Volterra/Wiener neural networks for the adaptive identification of non-linear hysteretic dynamic systems
401
Analysis and nonlinear modeling of the mound-building ant Formica lugubris spatial multi-scale dynamic in a larch-tree stand of the southern French Alps
402
Analysis and nonlinear modeling of the mound-building ant Formica lugubris spatial multi-scale dynamic in a larch-tree stand of the southern French Alps
403
Analysis and Numerical Evaluation of the Drift Function of Darwin and Lighthill for Axisymmetric Flows
404
Analysis and numerical modelling of wireline pressure tests in thin-bedded turbidites
405
Analysis and numerical simulation of a nonpremixed flame in a corner
406
Analysis and numerical simulation of a single-well tracer test inhomogeneous,layered and slightly tilted formations
407
Analysis and numerical simulation of chaotic advection and chemical diffusion during magma mixing: petrological implications
408
Analysis and numerical simulation of magnetic forces between rigid polygonal bodies. Part I: Analysis
409
Analysis and numerical simulation of magnetic forces between rigid polygonal bodies. Part II: Numerical simulation
410
Analysis and numerical simulation of phytoplankton–nutrient systems with nutrient loss Original Research Article
411
Analysis and numerical simulation of positive and dead-core solutions of singular two-point boundary value problems
412
Analysis and numerical simulation of strong discontinuities in finite strain poroplasticity Original Research Article
413
Analysis and numerical simulation of the meteorological observations at a tropical coastal site Chennai in India
414
Analysis and Numerical Simulation on the Reduction Effect of Stress Waves Caused by Water Jet Slotting Near Blasting Source
415
Analysis and numerical simulations of a dynamic contact problem with adhesion
416
Analysis and Numerical Simulations of a Stochastic SEIQR Epidemic System with Quarantine-Adjusted Incidence and Imperfect Vaccination
417
Analysis and numerical solution of a frictionless contact problem for electro-elastic–visco-plastic materials Original Research Article
418
Analysis and numerics for a parabolic equation with impulsive forcing Original Research Article
419
Analysis and occurrence of emerging brominated flame retardants in the Llobregat River basin
420
Analysis and occurrence of estrogenic hormones and their glucuronides in surface water and waste water in The Netherlands
421
Analysis and occurrence of pharmaceuticals, estrogens, progestogens and polar pesticides in sewage treatment plant effluents, river water and drinking water in the Llobregat river basin (Barcelona, Spain)
422
Analysis and occurrence of selected medium to highly polar pesticides in groundwater of Catalonia (NE Spain): An approach based on on-line solid phase extraction–liquid chromatography–electrospray-tandem mass spectrometry detection
423
Analysis and operation of hybrid active filter for harmonic elimination
424
Analysis and optimal control of a fractional MSD model
425
Analysis and Optimal Design Considerations for an Improved Full Bridge ZVS DC–DC Converter With High Efficiency
426
Analysis and optimal design for supersonic composite laminated plate
427
Analysis and optimal design of layered composites with high stiffness and high damping
428
Analysis and optimal design of layered structures subjected to impulsive loading
429
Analysis and optimal design of smart skin structures for buckling and free vibration
430
Analysis and optimal design of transverse flux linear motor with PM excitation for railway traction
431
Analysis and optimisation of event-condition-action rules on XML
432
Analysis and optimisation of multistable composites under residual stresses
433
Analysis and optimisation of the apodisation sharpness for linearly chirped dispersion compensating gratings
434
Analysis and optimisation of the behaviour of a certain class of intermediates in electrosynthesis
435
Analysis and optimisation of the tuning of the twelfths for a clarinet resonator
436
Analysis and Optimization A Compliant Bistable Mechanism With Chained Beam Constrain Model
437
Analysis and optimization of a cascading power cycle with liquefied natural gas (LNG) cold energy recovery
438
ANALYSIS AND OPTIMIZATION OF A FISSION CHAMBER DETECTOR USING MCNP4C AND SRIM MONTE CARLO CODES
439
Analysis and optimization of a latent thermal energy storage system with embedded heat pipes
440
Analysis and optimization of a metal hydride cooling system
441
Analysis and optimization of a micro SMES system using multiple parallel solenoids
442
Analysis and optimization of a polyurethane reaction injection molding (RIM) process using multivariate projection methods
443
Analysis and optimization of a solid oxide fuel cell and intercooled gas turbine (SOFC–ICGT) hybrid cycle
444
Analysis and optimization of aerodynamic noise in a centrifugal compressor
445
Analysis and optimization of an algorithm for discrete tomography
446
Analysis and optimization of cone crusher performance
447
Analysis and optimization of convective pin fins with trapezoidal profile having internal heat generation density
448
Analysis and optimization of current collecting systems in PEM fuel cells
449
Analysis and Optimization of Direct Sequence Spread Spectrum Scheme for an Unmanned Aerial Vehicle PPM Control Signal
450
Analysis and optimization of DS-CDMA systems with time-limited partial response chip waveforms
451
Analysis and optimization of dynamic response of air bearing sliders to disk waviness
452
Analysis and Optimization of Electric Vehicle Conversion Performance
453
Analysis and optimization of electrokinetic microchannel heat sink
454
Analysis and optimization of enantioselective extraction in a multi-product environment with a multistage equilibrium model
455
Analysis and optimization of externally stiffened crush tubes
456
Analysis and Optimization of Fibre-Metal Laminate Cylindrical Shells Subjected to Transverse Impact Loads
457
Analysis and optimization of heterogeneous materials using the variational asymptotic method for unit cell homogenization
458
Analysis and optimization of hybrid double lap aluminum-GFRP joints
459
Analysis and optimization of hybrid MCFC gas turbines plants
460
Analysis and optimization of inner products for mimetic finite difference methods on a triangular grid Original Research Article
461
Analysis and optimization of laminated composite circular cylindrical shell subjected to compressive axial and transverse transient dynamic loads
462
Analysis and Optimization of LLC Resonant Converter With a Novel Over-Current Protection
463
Analysis and optimization of micro-geometry of miniature spur gears manufactured by wire electric discharge machining
464
Analysis and Optimization of Mining Truck Operation Based on the Driver Whole Body Vibration
465
Analysis and Optimization of Mixing Performance of the High-Temperature Gas Flow in a Mixing Chamber
466
Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers
467
Analysis and optimization of noise in continuous-time OTA-C filters
468
Analysis and optimization of numerical sponge layers as a nonreflective boundary treatment
469
Analysis and optimization of power grids
470
Analysis and optimization of Q-switched operation of a Tm/sup 3+/-doped silica fiber laser operating at 2 (mu)m
471
Analysis and optimization of subcritical two-stage vapor injection heat pump systems
472
Analysis and optimization of temperature distribution in carbon fiber reinforced composite materials during microwave curing process Original Research Article
473
Analysis and optimization of the cyclic working mode of thermochemical transformers
474
Analysis and optimization of the heat-insulating light concrete hollow brick walls design by the finite element method
475
Analysis and optimization of the HVOF process by combined experimental and numerical approaches
476
Analysis and optimization of the low-temperature solar organic Rankine cycle (ORC)
477
Analysis and optimization of trimorph ring transducers
478
analysis and optimization of truss structures, constrained handling using genetic algorithm
479
ANALYSIS and OPTIMIZATION OF VAPOR ABSORPTION GENERATOR-HEAT EXCHANGER USING KERN METHOD and CFD
480
Analysis and optimization of weighted voting systems consisting of voting units with limited availability
481
Analysis and optimization of weighted voting systems consisting of voting units with limited availability
482
Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate
483
Analysis and origins of volatile organic compounds smoke from ligno-cellulosic fuels
484
Analysis and origins of volatile organic compounds smoke from ligno-cellulosic fuels
485
Analysis and parallel implementation of a forced N-body problem
486
Analysis and Parameter Extraction of PWave Using Correlation Method
487
Analysis and parameter identification for characteristic equations of single- and double-effect absorption chillers by means of multivariable regression
488
Analysis and parameter selection for an adaptive random search algorithm Original Research Article
489
ANALYSIS AND PARAMETRIC OPTIMIZATION OF ABRASIVE HOT AIR JET MACHINING FOR GLASS USING TAGUCHI METHOD AND UTILITY CONCEPT
490
Analysis and passivity-based control of zero-voltage-transition PWM converters
491
Analysis and performance assessment of a multigenerational system powered by Organic Rankine Cycle for a net zero energy house
492
Analysis and Performance Assessment of Six-Pulse Inverter-Fed Three-Phase and Six-Phase Induction Machines
493
Analysis and performance assessment of the active frequency drift method of islanding prevention
494
Analysis and performance evaluation of a distribution STATCOM for compensating voltage fluctuations
495
Analysis and Performance Evaluation of Microbial Fuel Cells for Electricity Generation
496
Analysis and performance evaluation of the EFCM common congestion controller for TCP connections
497
Analysis and performance evaluation of the OFDM-based metropolitan area network IEEE 802.16
498
Analysis and performance of an ironless stator axial flux PM machine
499
Analysis and performance of slotted tools in electrical discharge drilling
500
Analysis and performance of the control systems of the NASA 70-meter antennas
501
Analysis and Performance Optimization of Variable Compression Ratio Diesel Engine using Canola Oil Based Biodiesel
502
Analysis and perspectives of the government programs to promote the renewable electricity generation in Brazil
503
Analysis and phase control of a piezoelectric traveling-wave ultrasonic motor for haptic stick application
504
Analysis and placement of storage capacity in large distributed video servers
505
Analysis and Policy Design of Street Vendors Management in Bandar Lampung
506
Analysis and practical implementation of a model for combined growth and metabolite production of lactic acid bacteria
507
Analysis and prediction of baculovirus promoter sequences
508
Analysis and Prediction of Crash Fatalities in Australia
509
Analysis and prediction of daylighting and energy performance in atrium spaces using daylight-linked lighting controls
510
Analysis and prediction of flow from local source in a river basin using a Neuro-fuzzy modeling tool
511
Analysis and prediction of fouling layer structure in microfiltration Original Research Article
512
Analysis and prediction of functional sub-types from protein sequence alignments
513
Analysis and prediction of greenhouse green bean (Phaseolus vulgaris L.) production in a Mediterranean climate
514
Analysis and prediction of high-latitude geomagnetic disturbances based on a self-organized criticality framework Original Research Article
515
Analysis and prediction of inverter switching frequency in directtorque control of induction machine based on hysteresis bands andmachine parameters
516
Analysis and prediction of ocean tides by the computer program VAV
517
Analysis and Prediction of Overloaded Extra-Heavy Vehicles for Highway Safety Using Machine Learning
518
Analysis and prediction of selected mechanical/dynamic properties of wood after short and long-term waterlogging
519
Analysis and prediction of soil properties using local regression-kriging
520
Analysis and prediction of the spray produced by an internal mixing chamber twin-fluid nozzle
521
Analysis and prediction of thermal shock in brittle materials Original Research Article
522
Analysis and prediction of traffic fatalities resulting from angle collisions including the effect of vehicles’ configuration and compatibility
523
Analysis and Prediction of Transverse Mixing Coefficients in Natural Channels
524
Analysis and predictive models of stormwater runoff volumes, loads, and pollutant concentrations from watersheds in the Twin Cities metropolitan area, Minnesota, USA
525
Analysis and prevention of edge cracking phenomenon during hot rolling of non-oriented electrical steel sheets
526
Analysis and prevention of edge cracking phenomenon during hot rolling of non-oriented electrical steel sheets
527
Analysis and prevention of side cracking phenomenon occurring during hot rolling of thick low-carbon steel plates
528
Analysis and prevention of sticking occurring during hot rolling of ferritic stainless steel
529
Analysis and Prioritizing Capability in the Halal Resilience Supply Chain: A Fuzzy AHP Approach
530
Analysis and proposal of implementation effects of heat metering and energy efficiency retrofit of existing residential buildings in northern heating areas of China in “the 11th Five-Year Plan” period
531
Analysis and purification of alcohol-sensitive chiral compounds using 2,2,2-trifluoroethanol as a modifier in supercritical fluid chromatography
532
Analysis and purification of O-decanoyl sucrose regio-isomers by reversed phase high pressure liquid chromatography with evaporative light scattering detection
533
Analysis and quantitation of diazepam in cream biscuits by high-performance thin-layer chromatography and its confirmation by mass spectrometry
534
Analysis and quantitation of diazepam in cream biscuits by high-performance thin-layer chromatography and its confirmation by mass spectrometry Original Research Article
535
Analysis and Quantitation of Splicing Variants of the TPA-Inducible PGHS-1 mRNA in Rat Tracheal Epithelial Cells
536
Analysis and recognition of factors disturbing the effectiveness of the rural master plan (Based on the metacombined method)
537
analysis and recognition of standards in intelligent hybrid systems using natural computing
538
Analysis and redesign of an antilock brake system controller
539
Analysis and redesign of bolster beam of the bogie frame of a locomotive
540
Analysis and redesign of failed jacket in a petrochemical reactor
541
Analysis and reduction of acoustic noise from a brushless DC drive
542
Analysis and Reduction of Cross-Modulation Distortion in CDMA Receivers
543
Analysis and reduction of the risk potential caused by laser alloying and transformation hardening of metals
544
Analysis and Reduction of the Sloshing Phenomena Due To Sudden Movement of Spray Mixture Tanker
545
Analysis and reduction of the uncertainty of the assessment of childrenʹs lead exposure around an old mine
546
Analysis and rejection sampling of Wright–Fisher diffusion bridges
547
Analysis and remedial treatment of a steel pipe-jacking accident in complex underground environment
548
Analysis and removal of heteroatom containing species in coal liquid distillate over NiMo catalysts
549
Analysis and repair of clustered buildings: Case study of a block in the historic city centre of L’Aquila (Central Italy)
550
Analysis and repair of cracking in partition plate of RHR heat exchanger at Brunsbüttel nuclear power station Original Research Article
551
Analysis and reproduction of a signals periodic components by means of an extended block-adaptive Fourier analyzer
552
Analysis and Research on Non-Technological Factors with Hospital Informationization Construction
553
Analysis and results of prolonged resuscitation in cardiac arrest patients rescued by extracorporeal membrane oxygenation
554
Analysis and retention behaviour in high-performance liquid chromatography of terpenic plant constituents (Sideritis spp.) with pharmacological interest
555
Analysis and Review of Critical Theory in the Curriculum
556
Analysis and self-lubricating treatment of porous anodic alumina film formed in a compound solution
557
Analysis and semidiscrete Galerkin approximation of a class of nonlinear parabolic optimal control problems
558
Analysis and sensitivity analysis for polymer injection and compression molding Original Research Article
559
Analysis and sensitivity studies of postulated SB-LOCAs in the Mühleberg (KKM) BWR/4 by TRAC-BF1
560
Analysis and separation of enkephalin and dalargin analogues and fragments by capillary zone electrophoresis
561
Analysis and sequencing of the active-site peptide from native and organophosphate-inactivated acetylcholinesterase by electrospray ionization, quadrupole/time-of-flight (QTOF) mass spectrometry
562
Analysis and simulating recuperator impact on the thermodynamic performance of the combined water-ammonia cycle
563
Analysis and Simulation Dynamic Behavior of Power System Equipped with PSS and Excitation System Stabilizer
564
Analysis and simulation for a system of chemical reaction equations with a vortex formulation Original Research Article
565
Analysis and simulation of “low-cost” strategies to reduce fuel consumption and emissions in conventional gasoline light-duty vehicles
566
Analysis and Simulation of a 1-18-GHz broadband double-ridged horn antenna
567
Analysis and simulation of a content delivery application for vehicular wireless networks
568
Analysis and simulation of a high-speed two-phase AC drive for aerospace applications
569
Analysis and simulation of a hydrogen based electric system to improve power quality in distributed grids
570
Analysis and simulation of a Lorentz-type slotless, self-bearing motor
571
Analysis and Simulation of a Mid-Infrared P+InAs0.55 Sb0.15 P0.30/n0 InAs0.89 Sb0.11/N+ InAs0.55 Sb0.15 P0.30 double Heterojunction Photodetector Grown by LPE
572
Analysis and simulation of a stochastic, discrete-individual model of STD transmission with partnership concurrency
573
Analysis and simulation of an industrial vegetable oil refining process Original Research Article
574
Analysis and simulation of anode heating due to electron field emission
575
Analysis and simulation of Au/InSb/InP diode C–V characteristic: modeling and experiments
576
Analysis and Simulation of CDMA QAM-16 for AWGN and RAYLEIGH Channel
577
Analysis and Simulation of changes in EMG amplitude during high-level fatiguing contractions
578
Analysis and simulation of charge collection efficiency in silicon thin detectors
579
Analysis and simulation of charge collection efficiency in silicon thin detectors
580
Analysis and simulation of continuous food frying processes
581
Analysis and simulation of cracking patterns in coating under biaxial tensile or thermal stress using analysis/FEM strain-accommodation method
582
Analysis and simulation of dynamic performance for DFIG-based wind farm connected to a distrubition system
583
Analysis and simulation of erosion in drilling tools
584
Analysis and simulation of five-phase synchronous reluctance machines including third harmonic of airgap MMF
585
Analysis and simulation of five-phase variable-speed induction motor drives under asymmetrical connections
586
Analysis and Simulation of Heterostructure Devices [Book Review]
587
Analysis and simulation of hypervelocity gouging impacts for a high speed sled test
588
Analysis and Simulation of Inverter-Based Microgrid Droop Control Method in Island Operation Mode
589
Analysis and simulation of land use spatial pattern in Harbin prefecture based on trajectories and cellular automata—Markov modelling
590
Analysis and Simulation of Load Frequency Control in Power System with Reheater Steam Turbine
591
Analysis and simulation of magma mixing processes in 3D
592
Analysis and simulation of mobile air conditioning system coupled with engine cooling system
593
Analysis and simulation of scale-dependent fractal surfaces with application to seafloor morphology
594
Analysis and simulation of semiconductor laser dynamics with optoelectronic delay feedback
595
Analysis and Simulation of Severe Accidents in a Steam Methane Reforming Plant
596
Analysis and Simulation of the Effect of Knee Structure on the Condylar Forces
597
Analysis and simulation of the flow signal in the recirculation loop of a nuclear power station during a bistable flow event Original Research Article
598
Analysis and simulation of the IV-characteristics of PPV-oligomer based Schottky diodes
599
Analysis and simulation of Web services
600
Analysis and simulation of WF2Q+ based schedulers: comparisons, compliance with theoretical bounds and influence on end-to-end delay jitter
601
Analysis and simulation on rural energy–economy system on Shouyang County in China
602
Analysis and simulation tools for wind engineering
603
Analysis and sizing of thermal energy storage in combined heating, cooling and power plants for buildings
604
Analysis and Solution to Human-Induced Lateral Vibrations on a Historic Footbridge
605
Analysis and speciation of arsenic by stripping potentiometry: a review
606
Analysis and spectral characteristics of a spread-spectrum technique for conducted EMI suppression
607
Analysis and stability of aldehydes and terpenes in electropolished canisters
608
Analysis and stability of polymorphs in tablets: The case of Risperidone
609
Analysis and stability study of temozolomide using capillary electrophoresis
610
Analysis and stabilization for networked linear hyperbolic systems of rationally dependent conservation laws
611
Analysis and stabilization of nonlinear chaotic systems
612
Analysis and Standardization of Indicators of Technical Skills of First Secondary Level Teachers
613
Analysis and storage of samples for chromium determination in seawater
614
Analysis and structure prediction of chlorinated polycyclic aromatic hydrocarbons released from combustion of polyvinylchloride
615
Analysis and Study of Diabetes Follow-Up Data Using a Data-Mining-Based Approach in New Urban Area of Urumqi, Xinjiang, China, 2016-2017
616
Analysis and study of geometrical variability on the performance of junctionless tunneling field effect transistors: Advantage or deficiency?
617
Analysis and Study of Literary and Epistemological Metaphors in the Language of Religion, Based on Martyr Motahhari’s Views
618
Analysis and study of the distribution of polar and non-polar pesticides in wastewater effluents from modern and conventional treatments
619
Analysis and Study of the Effect of Atmospheric Turbulence on Laser weapon in Iraq
620
Analysis and Study on Space Variation Laws of Rainfall of Yuanyang Hani Terrace
621
Analysis and suppression of high-frequency inverter modulation in sensorless position-controlled induction machine drives
622
Analysis and synthesis for networked control systems with uncertain rate of packet losses
623
Analysis and synthesis of 1/f processes via Shannon wavelets
624
Analysis and synthesis of attractive quantum Markovian dynamics
625
Analysis and synthesis of discrete-time systems
626
Analysis and Synthesis of Formant Spaces of British, Australian, and American Accents
627
Analysis and synthesis of linear hybrid systems with state-triggered jumps
628
Analysis and synthesis of metadata goals for scientific data
629
Analysis and synthesis of multicomponent signals using positive time-frequency distributions
630
Analysis and Synthesis of Nested Feedback Systems .
631
Analysis and synthesis of networked control systems: Topological entropy, observability, robustness and optimal control
632
Analysis and synthesis of nonlinear time-delay systems via fuzzy control approach
633
Analysis and synthesis of radiate accretive growth in three dimensions
634
Analysis and Synthesis of Robust Control Systems Using Linear Parameter Dependent Lyapunov Functions
635
Analysis and synthesis of silhouettes of frontal - and flank-attacking shooting targets using graphs
636
Analysis and synthesis of strictly positive real transfer functions
637
Analysis and synthesis of switched linear control systems
638
Analysis and synthesis of the behaviour of complex programmable electronic systems in conditions of failure
639
Analysis and synthesis of the behaviour of complex programmable electronic systems in conditions of failure
640
Analysis and synthesis of the displacement function of the follower in constant-breadth cam mechanisms
641
ANALYSIS AND SYNTHESIS OF THE PRECISION INDEX DISTRIBUTION LAWS IN MODELS OF REAL TECHNOLOGICAL PROCESSES
642
Analysis and synthesis of the robust impulse-to-peak performance
643
Analysis and synthesis of the variability of irradiance and PV power time series with the wavelet transform
644
Analysis and Synthesis on a Generalized Stability Region.
645
Analysis and test verification of transitional flow in a dewar vent Original Research Article
646
Analysis and testing of a prototype pultruded composite causeway structure
647
Analysis and testing of corrugated board panels into the post-buckling regime
648
Analysis and Testing of Microvibrations Produced by Momentum Wheel Assemblies
649
Analysis and testing of rod-like penetrators in the 4–5 km/s velocity regime
650
Analysis and testing of the divergence and alignment indicator using the Penn State neutron radiography beam
651
Analysis and the understanding of fluoride removal mechanisms by an electrocoagulation/flotation (ECF) process Original Research Article
652
Analysis and theory of multilayer desorption: Ag on Re
653
Analysis and upgrading of bio-petroleum from biomass by direct deoxy-liquefaction
654
Analysis and upgrading of bio-petroleum from biomass by direct deoxy-liquefaction
655
Analysis and use of the tobacco eIF4A-10 promoter elements for transgene expression
656
Analysis and validation center for ITER RH maintenance scenarios in a virtual environment
657
Analysis and Validation of a New Access System to the AirportSalerno-Costa d'Amalfi
658
Analysis and Validation of a Real-Time AC Drive Simulator.
659
Analysis and validation of a run-of-mine ore grinding mill circuit model for process control
660
Analysis and validation of a simplified model of a wet flue gas cleaning system
661
Analysis and validation of ozone variability observed by lidar during the ESCOMPTE-2001 campaign
662
Analysis and validation of the methodology used in the extrapolation of wind speed data at different heights
663
Analysis and Verification of Service Interaction Protocols – A Brief Survey
664
Analysis and visualisation of flow around blades of axial fans for large capacity open-type motors
665
Analysis and visualisation with host-based software – The features of STN®AnaVist™
666
Analysis and visualization tools in CFD, part I: A configurable data extraction environment
667
Analysis and visualization tools in CFD, part II: A case study in grid adaptivity
668
Analysis and VLSI Architecture for 1-D and 2-D Discrete Wavelet Transform
669
Analysis and μ-based controller design for an electromagnetic suspension system
670
Analysis andDesign of ParallelMechanismsWith Flexure Joints
671
Analysis Approach to Durability Based on Material Initial Fatigue Quality and S-N Curve
672
Analysis at atomic level of dislocation emission and motion around nanoindentations in gold
673
Analysis at medium scale of low-resolution DInSAR data in slow-moving landslide-affected areas
674
Analysis at the genomospecies level of microbial populations changes in activated sludge: the case of Aeromonas
675
Analysis Based Multi-Cloud Interconnection on Sky Computing
676
Analysis based on equation of state for sodium halides Original Research Article
677
Analysis based on microcontact mechanism for the roughness dependent stick–slip motion
678
Analysis Based on the Three Objective Educational Domains for Final Summative Secondary Examinations of Science Subject (Chemistry, Physics, and Biology)
679
Analysis behaviour of static and dynamic properties of Ethylene-Propylene-Diene-Methylene crumb rubber mortar
680
Analysis by CGH of the tumor cell lines of the NCI anticancer drug discovery screen
681
Analysis by comparative genomic hybridization of gastric cancer with peritoneal dissemination and/or positive peritoneal cytology
682
Analysis by data mining in the emergency medicine triage database at a Taiwanese regional hospital
683
Analysis by desorption of volatile impurities from an ionic liquid solution in an unmodified gas chromatograph inlet
684
Analysis by droplet size classes of the liquid flow structure in a pressure swirl hollow cone spray
685
Analysis by electrochemical impedance spectroscopy of new MCFC cathode materials
686
Analysis by fuzzy difference equations of a model of CO2 level in the blood Original Research Article
687
Analysis by gas chromatography/mass spectrometry of fatty acids and esters in alcoholic beverages and tobaccos Original Research Article
688
Analysis by gas chromatography–mass spectrometry of the essential oil from the aerial parts of Pimpinella junoniae Ceb. & Ort., gathered in La Gomera, Canary Islands, Spain
689
Analysis by gas chromatography–mass spectrometry of the essential oils from the aerial parts of Pimpinella anagodendron Bolle and Pimpinella rupicola Svent., two endemic species to the Canary Islands, Spain
690
Analysis by gas chromatography–mass spectrometry of the essential oils from the aerial parts of Rutheopsis herbanica (Bolle) Hans. & Kunk., gathered in Fuerteventura (Canary Islands)
691
Analysis by gas chromatography–mass spectrometry of the volatile components of Ageratina adenophora Spreng., growing in the Canary Islands
692
Analysis by gas chromatography–mass spectrometry of the volatile components of Teucrium lusitanicum and Teucrium algarbiensis
693
Analysis by gas chromatography–mass spectrometry of the volatiles from the fruits of Ammodaucus leucotrichus subsp. leucotrichus and subsp. nanocarpus grown in North Africa and the Canary Islands, respectively
694
Analysis by high-resolution electron microscopy of elastic strain in thick InAs layers embedded in Ga0.47In0.53As buffers on InP(0 0 1) substrate Original Research Article
695
ANALYSIS BY HPLC-MS/MS OF BIOPHENOLIC COMPONENTS IN OLIVES AND OILS
696
Analysis by Laser-Induced Breakdown Spectroscopy of Complex Solids, Liquids, and Powders with an Echelle Spectrometer
697
Analysis by LC/ESI-MS of iophenoxic acid derivatives and evaluation as markers of oral baits to deliver pharmaceuticals to wildlife
698
Analysis by liquid chromatography–electrospray ionization tandem mass spectrometry and acute toxicity evaluation for β-blockers and lipid-regulating agents in wastewater samples
699
Analysis by modeling of plasma flow interactions with liquid injection
700
Analysis by phage display selection and site-directed retromutagenesis of the Mustard Trypsin Inhibitor 2 reactive site
701
Analysis by pulsed Doppler tissue imaging of ventricular interaction in long-distance competitive swimmers
702
Analysis by Raman spectroscopy of the conformational structure of whey proteins constituting fouling deposits during the processing in a heat exchanger Original Research Article
703
Analysis by simulation of a solar still integrated in a greenhouse roof
704
Analysis by synchrotron X-ray radiography of convection effects on the dynamic evolution of the solid–liquid interface and on solute distribution during the initial transient of solidification Original Research Article
705
Analysis by using X-ray photoelectron spectroscopy for polymethyl methacrylate and polytetrafluoroethylene etched by KrF excimer laser
706
Analysis by virus induced gene silencing of the expression of two proline biosynthetic pathway genes in Nicotiana benthamiana under stress conditions
707
Analysis by X-ray photoelectron spectroscopy of ruthenium stabilised polynuclear hexacyanometallate film electrodes Original Research Article
708
Analysis capability of alkylphosphonic acids and inorganic anions in aqueous solutions by ion exchange chromatography
709
Analysis conditions of an industrial Al–Mg–Si alloy by conventional and 3D atom probes
710
Analysis conditions of an industrial Al–Mg–Si alloy by conventional and 3D atom probes
711
Analysis conditions of an industrial Al–Mg–Si alloy by conventional and 3D atom probes
712
Analysis Effect of Environment Attitude, Health Consciousness and Knowledge in Developing Product Perception and Intention to Buy (A Study on Organic Food Product)
713
Analysis efficiency of Iranian Ajowan ecotypes on hairy root production mediated by different Agrobacterium rhizogenesis strains
714
Analysis Expression of ZIP1 and Caspase-3 Protein in Adenocarsinoma of the Prostate
715
Analysis for a class of singularly perturbed hybrid systems via averaging
716
Analysis for a crack emanating from a corner of a square hole in an infinite plate using the hybrid displacement discontinuity method
717
Analysis for a special first order characteristic equation with delay dependent parameters
718
Analysis for a system of coupled reaction-diffusion parabolic equations arising in biology
719
Analysis for a two-dissimilar-component cold standby repairable system with repair priority
720
Analysis for a two-dissimilar-component cold standby repairable system with repair priority
721
Analysis for a two-step dispersion scheme for coupled non-linear Schrِdinger equations
722
Analysis for an environmental friendly seedling breeding system
723
Analysis for an N-stepped Rayleigh bar with sections of complex geometry
724
Analysis for Arctic valve heat tracing requirements
725
Analysis for biodegradable polymeric scaffold of tissue engineering on precision injection molding
726
Analysis for buckling and vibrations of composite stiffened shells and plates
727
Analysis for Cd, Cu, Ni, Zn, and Mn in estuarine water by inductively coupled plasma mass spectrometry coupled with an automated flow injection system Original Research Article
728
Analysis for chloroanisoles and chlorophenols in cork by stir bar sorptive extraction and gas chromatography–mass spectrometry
729
Analysis for composite zeolite/foam aluminum–water mass recovery adsorption refrigeration system driven by engine exhaust heat
730
Analysis for creep behavior and collapse of thick-section composite structures
731
Analysis for determining surface free energy uncertainty by the Owen–Wendt method
732
Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process
733
Analysis for electrolytic oxidation and reduction of PbSO4/Pb electrode by electrochemical QCM technique
734
Analysis for endogenous and recombinant porcine somatotropine in serum Original Research Article
735
Analysis for fabrication errors of arrayed waveguide grating multiplexers
736
Analysis for hydrogen particle balance of plasma-wall system in the large helical device
737
Analysis for joint importance of components in a coherent system
738
Analysis for loss of coolant accident in a fusion reactor
739
Analysis for low molecular weight phenolic compounds in a red wine aged in oak chips
740
Analysis for low molecular weight phenolic compounds in a red wine aged in oak chips Original Research Article
741
Analysis for Microscopic Hyperbolic Two-Step Heat Transfer Problems
742
Analysis for microstructure of microlens arrays on micro-injection molding by numerical simulation
743
Analysis for optimal gate design of thin-walled injection molding
744
Analysis for peptide binding to porphyrin using surface plasmon resonance
745
Analysis for pharmaceutical scientists
746
Analysis for plastic buckling of thin-walled cylinders via non-classical constitutive theory of plasticity
747
Analysis for polycrystal nonproportional cyclic plasticity with a dissipated energy based rule for cross-hardenin
748
Analysis for polycrystal nonproportional cyclic plasticity with a dissipated energy based rule for cross-hardening
749
Analysis for preliminary design of a class of torsionally coupled buildings with horizontal setbacks
750
Analysis for preliminary design of a class of torsionally coupled buildings with horizontal setbacks
751
Analysis for Quadrupled Fixed Point of Contractive-Type Multi-Valued Operators
752
Analysis for seismic response of dry storage facility for spent fuel Original Research Article
753
Analysis for selected pathogens in water used during rinsing of broiler carcasses in small processing operations in Trinidad
754
Analysis for shaping the ITER first wall
755
Analysis for Soluble Solid Contents in Pineapples using NIR Spectroscopy
756
Analysis for Stabilization of Soil Slope in Silty Soil with Replacement of Soil Cement
757
Analysis for superior radiation resistance of InP-based solar cells
758
Analysis for surface probes of third experimental campaign in the large helical device
759
Analysis for sustainability in management of water scarce basins: the case of the Gediz River Basin in Turkey Original Research Article
760
Analysis for the dual-phase-lag bio-heat transfer during magnetic hyperthermia treatment
761
Analysis for the interlaminar stresses of thin layered composites subjected to thermal loads
762
ANALYSIS FOR THE PROVISONS ABOUT THE RENTAL AGREEMENT OF THE CODE OF OBLIGATIONS
763
Analysis for the stabilization of impulsive control Liu’s system q
764
Analysis for the wear resistance anisotropy of diamond cutting tools in theory and experiment
765
Analysis for wine C5–C8 aldehydes through the determination of their O-(2,3,4,5,6pentafluorobenzyl)oximes formed directly in the solid phase extraction cartridge
766
Analysis for wine C5–C8 aldehydes through the determination of their O-(2,3,4,5,6-pentafluorobenzyl)oximes formed directly in the solid phase extraction cartridge Original Research Article
767
Analysis for zearalenone and (alpha)-zearalenol in cereals and swine feed using accelerated solvent extraction and liquid chromatography with fluorescence detection
768
Analysis for zearalenone and α-zearalenol in cereals and swine feed using accelerated solvent extraction and liquid chromatography with fluorescence detection Original Research Article
769
ANALYSIS GAZI UNIVERSITY FACULTY OF EDUCATION MUSIC TEACHING PROGRAMMES’ PIANO STUDENTS’ ANXIETY LEVEL
770
Analysis Gender Role and Factors Affecting Soil and Water Conservation Adoption in Kersa Districts of Eastern Hararghe Zone, Ethiopia: The Case of Fanya Juu, Soil and Stone Bund Measure
771
Analysis high frequency of RF MEMS switches with electrostatic actuation
772
Analysis implicates alcohol in breast cancer
773
Analysis in a finite time-frequency plane
774
Analysis in distribution of two randomized algorithms for finding the maximum in a broadcast communication model
775
Analysis in indexing: document and domain centered approaches
776
Analysis in the Accuracy of Classification in Students’ Graduate School Entrance
777
Analysis in the Rat of 4-Hydroxynonenal Metabolites Excreted in Bile: Evidence of Enterohepatic Circulation of These Byproducts of Lipid Peroxidation
778
Analysis in Vitro of the Enzyme CRTISO Establishes a Poly-cis-Carotenoid Biosynthesis Pathway in Plants
779
Analysis Mechanization Skill of Wheat Farmers in Khoramabad Township, Iran
780
Analysis method and characterization of the antioxidant capacity of vitamin E-interactive polysulfone hemodialyzers
781
Analysis method and utilization mechanism of the overall value of EV charging
782
Analysis Method Development of Formic Acid dan Lactic Acid as Acidifier in Animal Fed Using High Performance Liquid Chromatography
783
Analysis method for bonded patch repair of a skin with a cutout
784
Analysis method for investigating the influence of mechanical components on dynamic mechanical error of machine tools
785
Analysis method for jet-like three-particle azimuthal correlations
786
Analysis method for jet-like three-particle azimuthal correlations
787
Analysis method for search for B0→l+l− at Belle experiment
788
Analysis Method for Spherical Dipole Antenna Array
789
Analysis method of Charpy V-notch impact data before and after electron beam welding reconstitution
790
Analysis method of planar cracks of arbitrary shape in the isotropic plane of a three-dimensional transversely isotropic magnetoelectroelastic medium
791
Analysis method of planar interface cracks of arbitrary shape in three-dimensional transversely isotropic magnetoelectroelastic bimaterials
792
Analysis methods and reference concentrations of 12 minor and trace elements in fish blood plasma
793
Analysis methods for facial motion
794
Analysis methods for multi-component wave measurements on board the DEMETER spacecraft
795
Analysis Methods for Observational Studies: Effects of Cardiac Rehabilitation on Mortality of Coronary Patients
796
Analysis methods in neutron and X-ray reflectometry
797
Analysis methods of CT-scan images for the characterization of the bone texture: First results
798
Analysis Methods of EEG Signals: A Review in EEG Application for Brain Disorder
799
Analysis methods of ginsenosides
800
Analysis mitral valve blood flow velocity in early and late diastole in 3460 health subjects by pulsed Doppler echocardiography
801
Analysis model to simulate the cracked pipe buried in soil
802
Analysis model visualization and graphical analysis attribute specification system
803
Analysis of (Ba,Ca,Sr)3MgSi2O8:Eu2+, Mn2+ phosphors for application in solid state lighting
804
Analysis of (NH4)2SO4/(NH4)H2PO4 mixtures by thermogravimetry and X-ray diffraction
805
Analysis of [2H7]methionine, [2H4]methionine, methionine, [2H4]homocysteine and homocysteine in plasma by gas chromatography–mass spectrometry to follow the fate of administered [2H7]methionine
806
Analysis of [3′,3′-d2]-nicotine and [3′,3′-d2]-cotinine by capillary liquid chromatography–electrospray tandem mass spectrometry
807
Analysis of [H−1,L2,L2] first-order system least squares for the incompressible Oseen type equations Original Research Article
808
Analysis of `stackedʹ whispering gallery dielectric resonators for submillimeter ESR spectroscopy
809
Analysis of {[N,N-dialkylamide or 1-methyl-2-pyrrolidone] + 1-chloroalkane or α,ω-dichloroalkane} mixtures in terms of group contribution
810
Analysis of {[N,N-dialkylamide or 1-methyl-2-pyrrolidone] + 1-chloroalkane or α,ω-dichloroalkane} mixtures in terms of group contribution
811
Analysis of ‘blinking’ or ‘hopping’ single molecule signals with a limited number of transitions
812
Analysis of ‘classical’ deposition rate law for crystallisation fouling
813
Analysis of “Amitraz (sum)” in pears with incurred residues – Comparison of the approach covering the individual metabolites via LC–MS/MS with the approach involving cleavage to 2,4-dimethylaniline
814
Analysis of “Bimbam”, a novel glucocorticoid-induced BH3-only transcript in cell lines and children with acute lymphoblastic leukemia
815
Analysis of “Evaluation of Cybersecurity Culture and Awareness Scale (ECSCAS)” based on Polychotomous models of Item Response Theory (IRT)
816
Analysis of “reservoir–well” system conditions using functional diagnostic methods
817
Analysis of 1,076 cases of sexual assault
818
Analysis of 1.5 Tesla proton MR spectra of human brain using LCModel and an imported basis set
819
Analysis of 10 years’ flight data of solar cell monitor on ETS-V
820
Analysis of 100 pharmaceuticals and their degradates in water samples by liquid chromatography/quadrupole time-of-flight mass spectrometry
821
Analysis of 100 years of curriculum designs
822
Analysis of 1089 burn patients in province of Kurdistan, Iran
823
Analysis of 109 Japanese childrenʹs lip and nose shapes using 3-dimensional digitizer
824
Analysis of 10B by PIGE with factor analytical γ-ray peak identification
825
Analysis of 112 Patients for Histopathological Assessment of Oral Lesions Through Oral Biopsy: The Observational study
826
Analysis of 113 hospitalized patients with confirmed 2009 influenza A (H1N1) virus infection
827
Analysis of 12 beta-lactam antibiotics in human plasma by HPLC with ultraviolet detection
828
Analysis of 12 different pentacyclic triterpenic acids from frankincense in human plasma by high-performance liquid chromatography and photodiode array detection
829
Analysis of 129I in groundwater samples: Direct and quantitative results below the drinking water standard
830
Analysis of 135 Cases of Pediatric Henoch-Schönlein Purpura in Gansu, Northwestern China
831
Analysis of 137Cs and 239,240Pu concentrations in surface waters of the Pacific Ocean
832
Analysis of 140 pesticides from conventional farming foodstuff samples after extraction with the modified QuECheRS method
833
Analysis of 150 Patients With Carcinoid Syndrome Seen in a Single Year at One Institution in the First Decade of the Twenty-First Century
834
Analysis of 16 teenage patients with sickle cell anemia and musculoskeletal complications
835
Analysis of 16th Century Qazw n Manuscripts by Raman Microscopy and Remote Laser Raman Microscopy
836
Analysis of 17 polar to semi-polar pesticides in the Ebro river delta during the main growing season of rice by automated on-line solid-phase extraction-liquid chromatography–tandem mass spectrometry
837
Analysis of 18 perfluorinated compounds in river waters: Comparison of high performance liquid chromatography–tandem mass spectrometry, ultra-high-performance liquid chromatography–tandem mass spectrometry and capillary liquid chromatography–mass spectrom
838
Analysis of 18F-labelled synthesis products on TLC plates: Comparison of radioactivity scanning, film autoradiography, and a phosphoimaging technique
839
Analysis of 19F and 13C NMR spectra of tetrafluorophthalic anhydride and its derivatives
840
Analysis of 1H-NMR relaxation time distributions in L1 to L6 rat lumbar vertebrae
841
Analysis of 1-nitropyrene in air particulate matter standard reference materials by using two-dimensional high performance liquid chromatography with online reduction and tandem mass spectrometry detection
842
Analysis of 1st- 3rd Grade Life Science Curriculums In Terms of Acquisition and Activities Related to Food and Nutrition
843
Analysis of 2,4,6-trinitrotoluene, pentaerythritol tetranitrate and cyclo-1,3,5-trimethylene-2,4,6-trinitramine using negative corona discharge ion mobility spectrometry
844
Analysis of 2,4-D residues in soil profile using HYDRUS-1D model
845
ANALYSIS OF 200 CASES OF LIVER TRAUMA: PROSPECTIVE STUDY
846
Analysis of 200 food items for benzo[a]pyrene and estimation of its intake in an epidemiologic study
847
Analysis of 2000 consecutive UK tonsillectomy specimens for disease-related prion protein
848
Analysis of 210Pb in sediment trap samples and sediments from the northern Arabian Sea: evidence for boundary scavenging
849
Analysis of 227Ac in seawater by delayed coincidence counting
850
Analysis of 232 total fertilization failure cycles during intracytoplasmic sperm injection
851
Analysis of 232Th/230Th in volcanic rocks: a comparison of thermal ionization mass spectrometry and other methodologies
852
Analysis of 239Pu, 244Cm and 243Am alpha spectra using the unfolding code Colégram without prior use of a nuclear data library
853
Analysis of 239Pu, 244Cm and 243Am alpha spectra using the unfolding code Colégram without prior use of a nuclear data library
854
Analysis of 27 polycyclic aromatic hydrocarbons by matrix solid-phase dispersion and isotope dilution gas chromatography-mass spectrometry in sewage sludge from the Spanish area of Madrid
855
Analysis of 2-alkylcyclobutanones for detection of food irradiation: Current status, needs and prospects
856
Analysis of 2-alkylcyclobutanones for detection of food irradiation: Current status, needs and prospects
857
Analysis of 2-aminoacetophenone by direct-immersion solid-phase microextraction and gas chromatography–mass spectrometry and its sensory impact in Chardonnay and Pinot gris wines
858
Analysis of 2-aminoacetophenone in wine using a stable isotope dilution assay and multidimensional gas chromatography–mass spectrometry
859
Analysis of 2D and 3D circular braiding processes: Modeling the interaction between the process parameters and the pre-form architecture
860
ANALYSIS OF 2-D AND 3-D UNSTEADY ANNULAR FLOWS WITH OSCILLATING BOUNDARIES, BASED ON A TIME-DEPENDENT COORDINATE TRANSFORMATION
861
Analysis of 2-D state-space periodically shift-variant discrete systems
862
Analysis of 2D triaxial flat braided textile composites
863
Analysis of 2D triaxial flat braided textile composites
864
Analysis of 2D triaxial flat braided textile composites
865
Analysis of 2-deuterated isopentenyl alcohols by 1H NMR of chiral esters
866
Analysis of 2-methylthio-derivatives of isoprenoid cytokinins by liquid chromatography–tandem mass spectrometry Original Research Article
867
Analysis of 2β-carbomethoxy-3β-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane in rat plasma: I. Method development and validation by capillary electrophoresis
868
Analysis of 2β-carbomethoxy-3β-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane in rat plasma: II. Pharmacokinetic profile in male and female Sprague–Dawley rats evaluated by capillary electrophoresis
869
Analysis of 3,5,6-trichloro-2-pyridinol in urine samples from the general population using gas chromatography–mass spectrometry after steam distillation and solid-phase extraction
870
Analysis of 35 priority semivolatile compounds in water by stir bar sorptive extraction–thermal desorption–gas chromatography–mass spectrometry: I. Method optimisation
871
Analysis of 35 priority semivolatile compounds in water by stir bar sorptive extraction–thermal desorption–gas chromatography–mass spectrometry: Part II: Method validation Original Research Article
872
Analysis of 36 Reported Cases of Late Thrombosis in Drug-Eluting Stents Placed in Coronary Arteries
873
Analysis of 3D bone ingrowth into polymer scaffolds via micro-computed tomography imaging
874
Analysis of 3D cracks in anisotropic multi-material domain with weakly singular SGBEM
875
Analysis of 3D elliptical vibration cutting with thin shear plane model
876
Analysis of 3D fluid driven crack propagation problem in co-seismic slip under P- and S-waves by hybrid hypersingular integral method
877
Analysis of 3-d folded polygonal loop antennas
878
Analysis of 3D In-situ Stress Field and Query Systemʹs Development Based on Visual BP Neural Network
879
Analysis of 3-D interconnect structures with PEEC using SPICE
880
Analysis of 3-D myocardial motion in tagged MR images using nonrigid image registration
881
Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel
882
Analysis of 3D problems using a new enhanced strain hexahedral element
883
Analysis of 3D random chopped fiber reinforced composites using FEM and random sequential adsorption
884
Analysis of 3D rolling forming with generalized rigid-plastic boundaries approach
885
Analysis of 3D solids using the natural neighbour radial point interpolation method Original Research Article
886
Analysis of 3D structures of platinum nanoparticles by high energy X-ray diffraction and reverse Monte Carlo simulations
887
Analysis of 3D time-dependent acoustic problems via a generic BE substructuring algorithm based on iterative solvers
888
Analysis of 3D transient blood flow passing through an artificial aortic valve by Lattice–Boltzmann methods
889
Analysis of 3-dimentional track parameters from 2-dimensional images of etched tracks in solid polymeric track detectors
890
Analysis of 3-dimentional track parameters from 2-dimensional images of etched tracks in solid polymeric track detectors
891
Analysis of 3gpp-MAC and two-key 3gpp-MAC Original Research Article
892
Analysis of 3-hydroxy-3-methylglutaryl-coenzyme A reductase inhibitors using liquid chromatography–electrospray mass spectrometry
893
Analysis of 3p allelic loss in papillary and nonpapillary renal cell carcinomas: Correlation with tumor karyotypes
894
Analysis of 3p Allelic Losses in Renal Cell Carcinomas: Comparison with Cytogenetic Results
895
Analysis of 3-year observations of CFC-11, CFC-12 and CFC-113 from a semi-rural site in China
896
Analysis of 4/sup th/-order LCLC resonant power converters
897
Analysis of 42 Consecutive Cases of Empyema Thoracis
898
Analysis of 4-hydroxyproline using 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol derivatization and micellar electrokinetic chromatography combined with laser-induced fluorescence detection
899
Analysis of 4-nonylphenols, phthalates, and polychlorinated biphenyls in soils and biosolids
900
Analysis of 4πγ ionization chamber response using EGS4 Monte Carlo code
901
Analysis of 50-year wind data of the southern Baltic Sea for modelling coastal morphological evolution – a case study from the Darss-Zingst Peninsula
902
Analysis of 57 elements in Japanese soils, with special reference to soil group and agricultural use
903
Analysis of 5HT3Ra gene expression by real time PCR in Systemic Lupus Erythematosis (SLE) patients
904
Analysis of 5HT3Ra gene expression by real time PCR in Systemic Lupus Erythematosus (SLE) patients
905
Analysis of 5-hydroxymethyl-2-furoic acid (HMFA) the main metabolite of alimentary 5-hydroxymethyl-2-furfural (HMF) with HPLC and GC in urine
906
Analysis of 5-hydroxymethylfurfural in foods by gas chromatography–mass spectrometry
907
Analysis of 6174delT Mutation in BRCA2 Gene by Mutagenically Separated PCR Among Libyan Patients with Breast Cancer
908
Analysis of 686 expressed sequence tags (ESTs) from the intertidal harpacticoid copepod Tigriopus japonicus (Crustacea, Copepoda)
909
Analysis of 7 synthetic musks in cream by supported liquid extraction and solid phase extraction followed by GC–MS/MS
910
Analysis of 70 Environmental Protection Agency priority pharmaceuticals in water by EPA Method 1694
911
Analysis of 8681 neonates with transposition of the great arteries: outcomes with and without Rashkind balloon atrial septostomy
912
Analysis of 8-hydroxy-2′-deoxyguanosine in human urine using hydrophilic interaction chromatography with tandem mass spectrometry
913
Analysis of 8-hydroxy-2′-deoxyguanosine in urine using high-performance liquid chromatography–electrospray tandem mass spectrometry
914
Analysis of 8-oxo-7,8-dihydro-2′-deoxyguanosine by ultra high pressure liquid chromatography–heat assisted electrospray ionization–tandem mass spectrometry
915
Analysis of 95 cases of squamous cell carcinoma of the external and middle ear
916
Analysis of 9th Grade Physics Coursebook from an Educational, Visual and Language Perspective
917
Analysis of a (Q, r, T) inventory policy with deterministic and random yields when future supply is uncertain
918
Analysis of a “barb test” for measuring the mixed-mode delamination toughness of coatings Original Research Article
919
Analysis of a “cluster” strategy for introducing hydrogen vehicles in Southern California
920
Analysis of a “humanized” phospholamban mouse model reveals new pathways linking Ca2+ cycling and cardiac electrophysiology
921
Analysis of a 1 kW residential combined heating and power system based on solid oxide fuel cell
922
Analysis of a 30 kbp plasmid encoding histidine decarboxylase gene in Tetragenococcus halophilus isolated from fish sauce
923
Analysis of a 30-year rainfall record (1967–1997) in semi–arid SE Spain for implications on vegetation
924
Analysis of a 3D boundary layer model at local scale: Validation on soybean surface radiative measurements
925
Analysis of a 3D chaotic system
926
Analysis of a bacteria–immunity model with delay quorum sensing
927
Analysis of a ball screw with a preload and lubrication
928
Analysis of a Batch Arrival Retrial Queue with Two-Phase Services, Feedback and Admission
929
Analysis of a bayonet tube heat exchanger
930
Analysis of a beach as a time-invariant linear input/output system of marine litter
931
Analysis of a Beam under Moving Loads
932
Analysis of a bending test on a full-scale PWR hot leg elbow containing a surface crack
933
Analysis of a bending test on a full-scale PWR hot leg elbow containing a surface crack
934
Analysis of a bending test on a full-scale PWR hot leg elbow containing a surface crack Original Research Article
935
Analysis of a BICS-only concurrent error detection method
936
Analysis of a bifurcation problem Original Research Article
937
Analysis of a bi-piezoelectric ceramic layer with an interfacial crack subjected to anti-plane shear and in-plane electric loading
938
Analysis of a bipolar energy-transport model for a metal-oxide-semiconductor diode
939
Analysis of a blow-molded HDPE bottle that failed by brittle fracture
940
Analysis of a boiler pipe rupture
941
Analysis of a boron dilution accident for WWER-440 combining the use of the codes DYN3D and SiTap
942
Analysis of A Braced Excavation In Soft Soils Considering The Consolidation Effect
943
Analysis of a bridge collapsed by an accidental blast loads
944
Analysis of a bridge failure due to fire using computational fluid dynamics and finite element models
945
Analysis of a bulk queue with N-policy multiple vacations and setup times
946
Analysis of a BWR Turbine Trip Experiment by Entire Plant Simulation with Spatial Kinetics
947
Analysis of a Cahn–Hilliard–Ladyzhenskaya system with singular potential
948
Analysis of a Campus-Wide Wireless Network
949
Analysis of a capacitive-filter, half-wave rectifier fed by a parallel-load resonant tank
950
Analysis of a carbon dioxide transcritical power cycle using a low temperature source
951
Analysis of a Cartesian PML approximation to acoustic scattering problems in
952
Analysis of a case of the foreign accent syndrome in terms of the framework of gestural phonology
953
Analysis of a causal diffusion model and its backwards diffusion problem
954
Analysis of a cDNA sequence encoding the immunoglobulin heavy chain of the Antarctic teleost Trematomus bernacchii
955
Analysis of a cDNA-derived sequence of a novel mannose-binding lectin, codakine, from the tropical clam Codakia orbicularis
956
Analysis of a cell-cycle promoter bound by a response regulator
957
Analysis of a cellulose cross-linking treatment of linen fabric using thermogravimetry
958
Analysis of a central crack normal to a piezoelectric–orthotropic interface
959
Analysis of a Circular Code Model
960
ANALYSIS OF A CIRCULAR WAVEGUIDE LOADED WITH DIELECTRIC AND METAL DISCS
961
Analysis of a class of discrete-time systems with power rule
962
Analysis of a class of distributed delay logistic differential equations
963
Analysis of a Climbing Parallel Robot for Construction Applications
964
ANALYSIS OF A COAXIAL WAVEGUIDE CORRUGATED WITH WEDGE-SHAPED RADIAL VANES CONSIDERING AZIMUTHAL HARMONIC EFFECTS
965
Analysis of a cofferdam support and design implications
966
Analysis of a collocation method for integrating rapidly oscillatory functions
967
Analysis of a coloured Dutch map from the eighteenth century: The need for a multi-analytical spectroscopic approach using portable instrumentation Original Research Article
968
Analysis of a combined converter-electromagnetic device by taking into account its control loop
969
Analysis of a combined power and ejector-refrigeration cycle using low temperature heat
970
Analysis of a combined power and refrigeration cycle by the exergy method
971
Analysis of a combined Rankine–vapour–compression refrigeration cycle
972
Analysis of a complex crop production system in interdependent agro-ecological zones: a methodological approach for potatoes in Argentina
973
Analysis of a complex polysaccharide (gum arabic) by multi-angle laser light scattering coupled on-line to size exclusion chromatography and flow field flow fractionation
974
Analysis of a complex toppling-circular slope failure
975
Analysis of a compression shear fracture test for curved interfaces in layered composites
976
ANALYSIS OF A COMPUTER-AIDED TELEOPERATION PROCESS BY MEANS OF GENERALIZED STOCHASTIC PETRI NETS
977
Analysis of a conjugated infinite element method for acoustic scattering
978
Analysis of a consensus fragment in ERIC-PCR fingerprinting of Enterobacter sakazakii
979
Analysis of a constitutional balanced translocation T(1;17)(p36;q 11.2-12.1) in a neuroblastoma patient
980
Analysis of a contention-based opportunistic spectrum access under general channel activity model
981
Analysis of a continuous car-following model for a bus route: existence, stability and bifurcations of synchronous motions
982
Analysis of a continuum-based beam element in the framework of explicit-FEM
983
Analysis of a coronal loop on the limb Original Research Article
984
Analysis of a counter-current vapor flow absorber
985
Analysis of a coupled pair of Cahn-Hilliard equations with nondegenerate mobility
986
Analysis of a coupled system of equations of a global geodynamic model of the earth Original Research Article
987
Analysis of a coupled-channel continuum approach for spectra of mass-17 compound systems
988
Analysis of a crack in a finite thermopiezoelectric plate under heat flux
989
Analysis of a crack in a functionally graded strip with a power form shear modulus
990
Analysis of a crack in a half-plane piezoelectric solid with traction-induction free boundary
991
Analysis of a cryolava flow-like feature on Titan
992
Analysis of a curved beam on uncertain elastic foundation
993
ANALYSIS OF A CYLINDRICAL BEARING WITH HELICAL GROOVES AND A BRANCHING GAS LUBRICANT FLOW IN VARIOUS OPERATING MODES
994
ANALYSIS OF A CYLINDRICAL BEARING WITH HELICAL GROOVES AND A BRANCHING GAS LUBRICANT FLOW IN VARIOUS OPERATING MODES
995
Analysis of a database of public domain Brazilian patent documents based on the I PC
996
Analysis of a DC motor drive in the presence of unbalance
997
Analysis of a deep well recharge experiment by calibrating a reactive transport model with field data
998
Analysis of a defect correction method for viscoelastic fluid flow
999
Analysis of a defective renewal equation arising in ruin theory
1000
Analysis of a delayed predator–prey system with impulsive diffusion between two patches
