<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Thermal runaway inhibitors for lithium battery electrolytes
2
Thermal runaway potential of LiCoO2 and Li(Ni1/3Co1/3Mn1/3)O2 batteries determined with adiabatic calorimetry methodology
3
Thermal runaway prediction for impregnated activated carbons from isothermal DSC measurements Original Research Article
4
Thermal runaway reaction hazards and mechanisms of hydroxylamine with acid/base contaminants
5
Thermal Scanning of Dental Pulp Chamber by Thermocouple System and Infrared Camera during Photo Curing of Resin Composites
6
Thermal scanning probe microscopy in the development of pharmaceuticals
7
Thermal Scratch on Surface of SUS430 Stainless Steel Strip in Cold Rolling Process Original Research Article
8
Thermal seawater desalination: Possibilities of using single effect and double effect absorption heat transformer systems Original Research Article
9
Thermal segmentation along the N. Ecuador–S. Colombia margin (1–4°N): Prominent influence of sedimentation rate in the trench
10
Thermal seizures in automotive drum brakes
11
Thermal self-sustainability of biochar production by pyrolysis
12
Thermal self-sustainability of biochar production by pyrolysis
13
Thermal sensation and comfort models for non-uniform and transient environments, part II: Local comfort of individual body parts
14
Thermal sensation and comfort models for non-uniform and transient environments, part III: Whole-body sensation and comfort
15
Thermal sensation and comfort models for non-uniform and transient environments, part IV: Adaptive neutral setpoints and smoothed whole-body sensation model
16
Thermal sensation and comfort models for non-uniform and transient environments: Part I: Local sensation of individual body parts
17
Thermal sensation and comfort with different task conditioning systems
18
Thermal sensation of Hong Kong people with increased air speed, temperature and humidity in air-conditioned environment
19
Thermal sensations of the whole body and head under local cooling and heating conditions during step-changes between workstation and ambient environment
20
Thermal sensitive shape recovery and mass transfer properties of polyurethane/modified MWNT composite membranes synthesized via in situ solution pre-polymerization
21
Thermal sensitivity analysis of a 22 N bipropellant thruster in a spacecraft
22
Thermal sensitivity analysis of a 22 N bipropellant thruster in a spacecraft
23
Thermal Sensitivity Analysis of a Telemetry Antenna in Sub-Orbital Spaceflights
24
Thermal sensor for in situ flying height measurements of optical flying heads
25
Thermal shielding of a sphere from the action of a strong shock wave
26
Thermal shock and post-quench strength of lapped borosilicate optical glass
27
Thermal shock and rain effects on soil surface characteristics: A laboratory approach
28
Thermal shock and thermal fatigue study of alumina
29
Thermal shock and thermal fatigue study of Sr- and Mg-doped lanthanum gallate
30
Thermal shock behavior of 3-dimensional C/SiC composite Original Research Article
31
Thermal shock behavior of 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings fabricated by atmospheric plasma spraying
32
Thermal shock behavior of as-sintered and pre-oxidation Zr2Al4C5–20SiC composites
33
Thermal shock behavior of dense mullite–zirconia composites obtained by two processing routes
34
Thermal shock behavior of EB-PVD thermal barrier coatings
35
Thermal shock behavior of nano-sized SiC particulate reinforced AlON composites
36
Thermal shock behavior of nano-sized ZrN particulate reinforced AlON composites
37
Thermal shock behavior of nanostructured and conventional Al2O3/13 wt%TiO2 coatings fabricated by plasma spraying
38
Thermal shock behavior of nanostructured and microstructured thermal barrier coatings on a Fe-based alloy
39
Thermal shock behavior of porous ZrB2–SiC ceramics
40
Thermal shock behavior of Ti3AlC2 from between 200 °C and 1300 °C
41
Thermal shock behavior of two-dimensional C/SiC composites in controlled atmospheres
42
Thermal shock behaviors of functionally graded ceramic tool materials
43
Thermal shock behaviors of YSZ thick thermal barrier coatings fabricated by suspension and atmospheric plasma spraying
44
Thermal shock behaviour of a kaolinte refractory prepared using a natural organic binder
45
Thermal Shock Behaviour of Alumina-Iron Composites
46
Thermal shock behaviour of angle-ply and woven dense ceramic-matrix composites
47
Thermal shock behaviour of high alumina aggregates derived from sillimanite beach sand with and without Fe2O3 doping
48
Thermal shock behaviour of industrial carbon anodes Original Research Article
49
Thermal shock behaviour of magnesia–spinel composites
50
Thermal shock behaviour of mullite ceramic
51
Thermal shock behaviour of tungsten after high flux H-plasma loading
52
Thermal shock behaviour of α:β-SiAlON–TiN composites
53
Thermal shock characterization of tungsten deformed in two orthogonal directions
54
Thermal shock cracking guidelines for acceptance in service
55
Thermal shock cycling behavior of NiCoCrAlYSiB coatings on Ni-base superalloys: I. Accelerated oxidation attack
56
Thermal shock cycling behavior of NiCoCrAlYSiB coatings on Ni-base superalloys: II. Microstructure evolution
57
Thermal shock damage behavior of CVD ZnS by oxygen propane flame: A numerical and experimental study
58
Thermal shock damage characterization of refractory composites
59
Thermal shock damage evaluation of refractory castables via hot elastic modulus measurements
60
Thermal shock damage of the self-reinforced α-SiAlON ceramic using barium aluminosilicate glass ceramic as the sintering additive
61
Thermal shock experiments on cracked cladded plates
62
Thermal shock experiments on cracked cladded plates
63
Thermal shock experiments on cracked cladded plates Original Research Article
64
THERMAL SHOCK FRACTURE IN A W-Cu DIVERTOR PLATE WITH A FUNCTIONALLY GRADED NONHOMOGENEOUS INTERFACE
65
Thermal shock fracture in unidirectional fibre-reinforced ceramic–matrix composites
66
Thermal Shock In Periodic Edge-Cracked Plate Supported By Elastic Foundation
67
Thermal shock induced nanocrack as high efficiency surface conduction electron emitter
68
Thermal shock measurements and modelling for solid high-power targets at high temperatures
69
Thermal shock modeling of Ultra-High Temperature Ceramics under active cooling
70
Thermal shock of alumina by compressed air cooling
71
Thermal shock of functionally graded thermal barrier coatings with similar thermal resistance
72
Thermal shock of ground and polished alumina and Al2O3/SiC nanocomposites
73
THERMAL SHOCK OF REFRACTORIES
74
Thermal shock of semi-infinite body with multi-pulsed intense laser radiation
75
Thermal shock parameters [R, R‴ and R‴′] of magnesia–spinel composites
76
Thermal shock properties and failure mechanism of plasma sprayed Al2O3/TiO2 nanocomposite coatings
77
Thermal shock properties of 2D-SiCf/SiC composites
78
Thermal shock properties of 3D-C/SiC composites prepared via polymer infiltration pyrolysis (PIP)
79
Thermal shock properties of alumina reinforced with Ti(C,N) whiskers
80
Thermal shock properties of β-sialon ceramics
81
Thermal shock residual strength of functionally graded ceramics
82
Thermal shock resistance analysis methodology of ceramic coating/metal substrate systems
83
Thermal shock resistance and fatigue of Zircon–Mullite composite materials
84
Thermal shock resistance and fracture toughness of liquid-phase-sintered SiC-based ceramics
85
Thermal shock resistance and mechanical properties of La2Ce2O7 thermal barrier coatings with segmented structure
86
Thermal shock resistance and thermal-mechanical processing of sapphire
87
Thermal shock resistance enhancement of functionally graded materials by multiple cracking Original Research Article
88
Thermal shock resistance of a ZrB2–SiC–graphite composite in low oxygen partial pressure environment
89
Thermal Shock Resistance of Al2 O3/ZrO2 (Y2O3) Composites
90
Thermal shock resistance of aluminium oxide single crystals with different crystallographic faces
91
Thermal shock resistance of C/C composites
92
Thermal shock resistance of ceramic coatings Original Research Article
93
Thermal shock resistance of ceramics with temperature-dependent material properties at elevated temperature Original Research Article
94
Thermal shock resistance of dense zirconia matrix composites evaluated by indentation techniques
95
Thermal shock resistance of electroslag cast steel for hot-working tools
96
Thermal shock resistance of FeMnCrAl/Cr3C2–Ni9Al coatings deposited by high velocity arc spraying
97
Thermal shock resistance of fibrous monolithic Si3N4/BN ceramics
98
Thermal shock resistance of functionally graded materials Original Research Article
99
Thermal shock resistance of functionally gradient solid cylinders
100
Thermal shock resistance of in situ formed Si2N2O–Si3N4 composites by gelcasting
101
Thermal shock resistance of in situ formed SiC–BN composites
102
Thermal shock resistance of in situ reaction bonded porous silicon carbide ceramics
103
Thermal shock resistance of in situ toughened α-SiAlONs with barium aluminosilicate as an additive sintered by SPS
104
Thermal shock resistance of magnesia–chrome refractories—experimental and criterial evaluation Review Article
105
Thermal shock resistance of polycrystalline cubic boron nitride
106
Thermal shock resistance of SiC/MAS–LAS multilayer joint of carbon/carbon composites to LAS glass-ceramic
107
Thermal shock resistance of the Al2O3-metal composites made by reactive infiltration of Al into oxide fiber board
108
Thermal shock resistance of the porous Al2O3/ZrO2 ceramics prepared by gelcasting
109
Thermal shock resistance of TiB2–Cu interpenetrating phase composites
110
Thermal shock resistance of two micro-structured alumina obtained by natural sintering and SPS
111
Thermal shock resistance of ultra-high temperature ceramics including the effects of thermal environment and external constraints
112
Thermal shock resistance of yttria-stabilized zirconia with Palmqvist indentation cracks
113
Thermal shock resistance of ZrB2 and ZrB2–30% SiC
114
Thermal shock resistance of α/β-sialon ceramic composites
115
Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying
116
Thermal shock response of deformed and recrystallised tungsten
117
Thermal shock response of FGM cylindrical plates with various grading patterns
118
Thermal shock strength of Al2O3 by laser irradiation method
119
Thermal shock stresses due to heat convection at a bounding surface in a thick orthotropic cylindrical shell
120
Thermal shock study of α-alumina doped with 0.2% MgO
121
Thermal short circuit on groundwater heat pump
122
Thermal shunt for quick cool-down of two-stage closed-cycle refrigerator
123
Thermal shutdown behavior of PVdF-HFP based polymer electrolytes comprising heat sensitive cross-linkable oligomers
124
Thermal signatures of land mines buried in mineral and organic soils––modelling and experiments
125
Thermal Signatures of Pairing Correlations in Nuclei and Nanoparticles Original Research Article
126
Thermal silicatization: A new approach for bonding to zirconia ceramics
127
Thermal Simulation and Detection of Breast Tumor Using Passive Acoustic Thermometry
128
Thermal simulation for geometric optimization of metallized polypropylene film capacitors
129
Thermal Simulation of a Pyrotechnic Solid-Propellant Gas Generator
130
Thermal simulation of a single particle in a falling-particle solar receiver
131
Thermal simulation of an attached sunspace and its experimental validation
132
Thermal simulation of buildings with double-skin façades
133
Thermal simulation of composite high conductivity laminated microencapsulated phase change material (MEPCM) board
134
Thermal simulation of large-scale lithium secondary batteries using a graphite–coke hybrid carbon negative electrode and LiNi0.7Co0.3O2 positive electrode
135
Thermal simulation of pulsed direct laser interference patterning of metallic substrates using the smoothed particle hydrodynamics approach
136
Thermal Simulation of Solidification Process in Continuous Casting
137
Thermal simulation of two-phase flow in underbalanced drilling operation with oil and gas production
138
THERMAL SIMULATION SOFTWARE BASED ON EXCEL FOR SPACECRAFT APPLICATIONS
139
Thermal slip boundary conditions in vibrational nonequilibrium flows
140
Thermal snapping and vibration characteristics of cylindrical composite panels using layerwise theory
141
Thermal snapping of functionally graded materials plates
142
Thermal softening induced plastic instability in rate-dependent materials
143
Thermal softening of a particlemodified tungsten-based composite under adiabatic compression
144
Thermal Solid Sample Introduction–Fast Gas Chromatography–Low Flow Ion Mobility Spectrometry as a field screening detection system
145
Thermal solid state synthesis of coordination complexes from hydrogen bonded precursors
146
Thermal solid–solid interaction and catalytic properties of CuO/Al2O3 system treated with ZnO and MoO3
147
Thermal solid–solid interactions and catalytic properties of V2O5/Al2O3 system treated with Li2O and Ag2O
148
Thermal solid–solid interactions and physicochemical properties of NiO/Fe2O3 system doped with K2O
149
Thermal solutions for discrete and wafer-level RF MEMS switch packages
150
Thermal spikes in Ag/Fe and Cu/Fe ion beam mixing
151
Thermal spin-transfer torques on magnetic domain walls
152
Thermal spray applications in powertrain contribute to the saving of energy and material resources
153
Thermal spray coatings for molten carbonate fuel cells separator plates
154
Thermal spray coatings of highly reinforced aluminium matrix composites with sol–gel silica coated SiC particles
155
Thermal spray processing of nanoscale materials : Davos, Switzerland
156
Thermal sprayed hydroxyapatite splats: nanostructures, pore formation mechanisms and TEM characterization
157
Thermal sprayed stainless steel/carbon nanotube composite coatings
158
Thermal spraying and the fabrication of coatings with tailored electromagnetic properties
159
Thermal spraying of a high nitrogen duplex austenitic–ferritic steel
160
Thermal spraying of billets and fiber prepregs for semi-solid forming of metal matrix composites
161
Thermal spraying of biomaterials
162
Thermal spraying of Co,Ti-substituted Ba-hexaferrite coatings for electromagnetic wave absorption applications
163
Thermal spraying of cylinder bores with the Plasma Transferred Wire Arc process
164
Thermal spraying of nanocrystalline inconel 718
165
Thermal spraying of nanostructured cermet coatings
166
Thermal spraying of silicon nitride coatings using highly accelerated precursor powder particles
167
Thermal spraying of transition metal aluminides: An overview
168
Thermal spraying to coat traditional ceramic substrates: Case studies
169
Thermal spreading of MoO3 in H–ZY
170
Thermal spreading of WO3 onto zirconia support
171
Thermal spreading resistance characteristics of a high power light emitting diode module
172
Thermal springs, fumaroles and gas vents of continental Yemen: Their relation with active tectonics, regional hydrology and the country’s geothermal potential
173
Thermal stabilisation of alumina by lanthanide ions
174
Thermal stabilisation of alumina by lanthanide ions
175
Thermal stabilities of lithium magnesium cobalt oxides for high safety lithium-ion batteries
176
Thermal stabilities of metal bottom electrodes for Ta2O5 metal-oxide-metal capacitor structure
177
Thermal stabilities of metal bottom electrodes for Ta2O5 metal-oxide-metal capacitor structure
178
Thermal stabilities of nanoporous metallic electrodes at elevated temperatures
179
Thermal stabilities of polystyrene/silica hybrid nanocomposites via microwave-assisted in situ polymerization
180
Thermal stabilities of some glassy metals with a wide supercooled liquid region
181
Thermal stabilities of some glassy metals with a wide supercooled liquid region
182
Thermal stabilities, elastic properties and electronic structures of B2-MgRE (RE = Sc, Y, La) by first-principles calculations
183
Thermal stability against reduction of LaMn1−yCoyO3 perovskites
184
Thermal stability analysis of circular functionally graded sandwich plates of variable thickness using pseudo-spectral method
185
Thermal stability analysis of conduction-cooled HTS coil Original Research Article
186
Thermal stability analysis of crushed-rock embankments on a slope in permafrost regions
187
Thermal stability analysis of cylindrical thin-walled tanks subjected to lateral fire loading
188
Thermal stability analysis of organo-silicates, using solid phase microextraction techniques
189
Thermal stability and activities of soil enzymes as influenced by crop rotations
190
Thermal stability and activities of soil enzymes as influenced by crop rotations
191
Thermal stability and aggregation of creatine kinase from rabbit skeletal muscle.: Effect of 2-hydroxypropyl-β-cyclodextrin Original Research Article
192
Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium
193
Thermal stability and bond dissociation energy of fluorinated polymers: A critical evaluation
194
Thermal stability and bonding in the silver complexes of ethylenediaminetetraacetic acid
195
Thermal stability and catalytic activity of gold nanoparticles supported on silica
196
Thermal stability and catalytic activity of Wells-Dawson tungsten heteropoly salts Original Research Article
197
Thermal stability and chemical bonding states of AlOxNy/Si gate stacks revealed by synchrotron radiation photoemission spectroscopy
198
Thermal stability and conduction properties of the LaxSr2−xFeO4+δ system
199
Thermal stability and conformational changes of transglutaminase from a newly isolated Streptomyces hygroscopicus
200
Thermal stability and corrosion behavior of Cu–Zr–Al–Y bulk metallic glass
201
Thermal stability and corrosion behaviour of Mg–Y–Nd and Mg–Tb–Nd alloys
202
Thermal stability and corrosion resistance of polysiloxane coatings on 2024-T3 and 6061-T6 aluminum alloy
203
Thermal stability and creep of polycrystalline nanowires
204
Thermal stability and creep of polycrystalline nanowires Original Research Article
205
Thermal stability and crystallisation of a Zr55Cu30Al10Ni5 bulk metallic glass studied by in situ ultrasonic echography
206
Thermal stability and crystallization behavior of (Fe0.75 − xDyxB0.2Si0.05)96Nb4 (x = 0–0.07) bulk metallic glasses
207
Thermal stability and crystallization behavior of Fe77C5B4(AlGa)3(PSi)11 metallic glasses
208
Thermal stability and crystallization behavior of Fe77C5B4(AlGa)3(PSi)11 metallic glasses
209
Thermal stability and crystallization behavior of imidazolium halide ionic liquids
210
Thermal stability and crystallization behavior of TiO2 doped ZBLAN glasses
211
Thermal stability and crystallization kinetics of Cu-reinforced Cu47Ti33Zr11Ni8Si1 metallic glass composite powders synthesized by ball milling: the effect of particulate reinforcement
212
Thermal stability and crystallization kinetics of Mg–Cu–Y–B quaternary alloys
213
Thermal stability and crystallization kinetics of new As–Ge–Se–Sb glasses
214
Thermal stability and crystallization kinetics study of some Se-Te-Ge glassy alloys
215
Thermal stability and crystallization kinetics study of some Se-Te-Ge glassy alloys
216
Thermal stability and crystallization of Zr–Al–Cu–Ni based amorphous alloy added with boron and silicon
217
Thermal stability and crystallization phenomena of low cost Ti-based bulk metallic glass
218
Thermal stability and decomposition kinetics of styrene-butadiene rubber nanocomposites filled with different particle sized kaolinites
219
Thermal stability and decomposition mechanism of 1-allylimidazole coordination compounds: a TG–FTIR study of Co(II), Ni(II) and Cu(II) hexacoordinate complexes
220
Thermal stability and decomposition mechanisms of ettringite at <120°C
221
Thermal stability and decomposition of diesel fuel under subcritical and supercritical conditions
222
Thermal Stability and Decomposition Study of Epoxy/Clay Nanocomposites
223
Thermal stability and degradation kinetics of novel organic/inorganic epoxy hybrid containing nitrogen/silicon/phosphorus by sol–gel method
224
Thermal stability and degradation of the post-use reclaim milk pouches during multiple extrusion cycles
225
Thermal stability and degradation products analysis of benzocyclobutene-terminated imide polymers
226
Thermal Stability and Dynamic Magnetic Properties of NiO/Fe Multilayered Thin Films Prepared by Oblique-Angle Sputtering Technique
227
Thermal Stability and Dynamic Mechanical Properties of Nano
228
Thermal stability and effect of substrate temperature of TiSiBC hard nanocomposite coatings on microstructure, mechanical, thermal behaviour deposited by magnetron sputtering
229
Thermal stability and effect of typical water gas shift reactant composition on H2 permeability through a Pd-YSZ-PSS composite membrane
230
Thermal stability and elastic properties of Mg2X (X = Si, Ge, Sn, Pb) phases from first-principle calculations
231
Thermal stability and electric properties of Ba0.7Sr0.3TiO3 parallel plate capacitor with nano-Cr interlayer
232
Thermal stability and electrical characteristics of NiSi films with electroplated Ni(W) alloy
233
Thermal stability and electrical properties of conducting polymer based ‘polymeric–inorganic’ composites: Poly-o-anisidine and poly-o-toluidine Sn(IV) tungstate
234
Thermal stability and electrochemical properties of CrZr–Si–N films synthesized by closed field unbalanced magnetron sputtering
235
Thermal stability and electrode properties of melt-spun Mg65Cu25Nd10 amorphous alloy
236
Thermal stability and elevated temperature mechanical properties of electroslag remelted Fe-16wt.%Al-(0.14–0.5)wt.%C intermetallic alloys
237
Thermal stability and elevated temperature mechanical properties of electroslag remelted Fe-16wt.%Al-(0.14–0.5)wt.%C intermetallic alloys
238
Thermal stability and flame resistance of cotton fabrics treated with whey proteins
239
Thermal stability and flame retardant effects of halloysite nanotubes on poly(propylene)
240
Thermal stability and flammability of polyamide 66/montmorillonite nanocomposites
241
Thermal stability and glass forming ability of cast iron–phosphorus amorphous alloys
242
Thermal stability and glass forming ability of cast iron–phosphorus amorphous alloys
243
Thermal stability and glass-forming ability of amorphous Nd-Al-TM (TM = Fe, Co, Ni or Cu) alloys
244
Thermal stability and glass-forming ability of amorphous Nd-Al-TM (TM = Fe, Co, Ni or Cu) alloys
245
Thermal stability and glass-forming ability of new Ti-based bulk metallic glasses
246
Thermal stability and grain growth behavior of nanocrystalline Mg2Si
247
Thermal stability and hardness of metastable Co–C composite alloy films
248
Thermal stability and hardness of metastable Co–C composite alloy films
249
Thermal stability and high-temperature oxidation behavior of Si–Cr–N coatings with high content of silicon
250
Thermal stability and high-temperature wear of Ti–TiN and TiN–CrN nanomultilayer coatings under self-mated conditions
251
Thermal stability and hot-stage Raman spectroscopic study of Ca-montmorillonite modified with different surfactants: A comparative study
252
Thermal stability and hydrogen induced abstraction of silyl groups on Si(1 0 0) surfaces
253
Thermal stability and hydrophobicity of mesoporous silica FSM-16
254
Thermal stability and instrumented indentation in a Mg60Cu30Y10 bulk metallic glass
255
Thermal stability and instrumented indentation in a Mg60Cu30Y10 bulk metallic glass
256
Thermal stability and instrumented indentation in a Mg60Cu30Y10 bulk metallic glass
257
Thermal stability and IR spectra of indium(III) phosphates(V) obtained in solid state
258
Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys
259
Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys
260
Thermal stability and kinetic studies of new dinuclear copper(II) complexes with octaazamacrocyclic and multidonor bidentate ligands
261
Thermal stability and kinetic study of conductive polymers containing phenylene and bithiophene units
262
Thermal Stability and Kinetic Study of Fluvoxamine Stability in Binary Samples with Lactose
263
Thermal stability and kinetic study of poly(ethyl methacrylate-co-acrylonitrile) nanocomposites prepared by in situ polymerization in presence of an Algerian bentonite
264
Thermal stability and kinetics of defects in magnesium aluminate spinel irradiated with fast neutrons
265
Thermal Stability and Kinetics of Sodium Alginate and Lignosulphonic Acid Blends
266
Thermal stability and kinetics of ylide-borane complexes
267
Thermal stability and long-chain fatty acid positional distribution on glycerol of argan oil
268
Thermal stability and magnetic properties of (Fe, Co)–Ga–(P, C, B, Si) bulk glassy alloys
269
Thermal stability and magnetic properties of Co–Fe–Hf–Ti–Mo–B bulk metallic glass
270
Thermal stability and magnetic properties of FeSiB amorphous alloy
271
Thermal stability and magnetocaloric properties of GdDyAlCo bulk metallic glasses
272
Thermal stability and mechanical behavior of ultra-fine bcc Ta and V coatings
273
Thermal stability and mechanical properties of a Zr-based bulk amorphous alloy
274
Thermal stability and mechanical properties of a Zr-based bulk amorphous alloy
275
Thermal stability and mechanical properties of a Zr-based bulk amorphous alloy
276
Thermal stability and mechanical properties of Al-based amorphous alloys
277
Thermal stability and mechanical properties of Cu46Zr46Ag8 bulk metallic glass and its composites
278
Thermal stability and mechanical properties of fluorinated diamond-like carbon coatings
279
Thermal stability and mechanical properties of nanostructured Ti–24Nb–4Zr–7.9Sn alloy
280
Thermal stability and mechanical properties of Ni–W–P electroless deposits
281
Thermal stability and mechanical properties of SiC particulate-reinforced Si–C–N composites after heating at 2000 °C
282
Thermal Stability and Mechanical Properties of Surface CuO- and MgO-Modified Y-TZP Ceramics
283
Thermal stability and mechanical properties of ultrafine grained low carbon steel
284
Thermal stability and mechanical properties of ultrafine grained low carbon steel
285
Thermal stability and microhardness of new Co-based bulk metallic glasses
286
Thermal stability and microstructure characterization of CrN/WN multilayer coatings fabricated by ion-beam assisted deposition
287
Thermal stability and microstructure characterization of sputtered Ni–P and Ni–P–Cr coatings
288
Thermal stability and moisture resistance of C/Al2O3/Al solar absorber surfaces
289
Thermal stability and molecular dynamics of triclosan in solid state studied by 35Cl–NQR spectroscopy and DFT calculations
290
thermal stability and monomer elution of bulk fill composite resins cured from different irradiation distances
291
Thermal stability and nano-structure of metal-doped carbon layers
292
Thermal stability and optical property of ormocers (organically modified ceramics) nanoparticles produced from copolymerization between amino-silanes and tetraethoxysilane
293
Thermal stability and ordering effects in Ni–Fe–Ga ferromagnetic shape memory alloys
294
Thermal stability and oxidation behavior of Al-containing nanocrystalline powders produced by cryomilling
295
Thermal stability and oxidation behavior of nanostructured NiCoCrAlY coatings
296
Thermal stability and oxidation behavior of quaternary TiZrAlN magnetron sputtered thin films: Influence of the pristine microstructure
297
Thermal stability and oxidation resistance of arc evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN coatings
298
Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy
299
Thermal stability and oxidation resistance of Ti–B–N, Ti–Cr–B–N, Ti–Si–B–N and Ti–Al–Si–B–N films
300
Thermal stability and oxidation resistance of TiCrAlYO coatings on SS430 for solid oxide fuel cell interconnect applications
301
Thermal stability and oxidizing properties of mixed alkaline earth-alkali molten carbonates: A focus on the lithium-sodium carbonate eutectic system with magnesium additions
302
Thermal stability and permeability of microencapsulated n-octadecane and cyclohexane
303
Thermal stability and photochromic properties of a fluorinated indolylfulgimide in a protic and aprotic solvent
304
Thermal stability and photoluminescence of Zr1−xCexO2 (0 ≤ x ≤ 1) nanoparticles synthesized in a non-aqueous process
305
Thermal stability and photostability of water solutions of sulfophthalocyanines of Ru(II), Cu(II), Ni(II), Fe(III) and Co(II)
306
Thermal stability and pozzolanic activity of calcined illite
307
Thermal stability and pozzolanic activity of raw and calcined mixed-layer mica/smectite
308
Thermal stability and preparation of dense membrane ceramics of BIMEVOX
309
Thermal stability and proton conductivity of silane based nanostructured composite membranes
310
Thermal stability and rate order dependence for the thermal decomposition of electro-optic dyes Original Research Article
311
Thermal stability and reaction properties of passivated Al/CuO nano-thermite Original Research Article
312
Thermal stability and redox properties of M. tuberculosis CuSOD
313
Thermal stability and related thermodynamic properties of N-ethylthiourea
314
Thermal stability and siting of aluminum in isostructural ZSM-22 and Theta-1 zeolites
315
Thermal stability and spectroscopic properties of Er3+-doped lead fluorogermanate glasses
316
Thermal stability and spectroscopic properties of Er3+-doped niobium tellurite glasses for broadband amplifiers
317
Thermal stability and spectroscopic properties of erbium-doped niobic-tungsten–tellurite glasses for laser and amplifier devices
318
Thermal stability and strength of deformation microstructures in pure copper Original Research Article
319
Thermal stability and structural changes of double-walled carbon nanotubes by heat treatment
320
Thermal stability and structural evolution of quaternary Ti–Ta–B–N coatings
321
Thermal stability and sublimation behavior of (GaPcF)n, (AlPcF)n, and their 1:1 copolymer
322
Thermal stability and surface acidity of mesoporous silica doubly doped by incorporation of sulfate and zirconium ions
323
Thermal stability and thermal decomposition study of hindered amine light stabilizers
324
Thermal stability and thermal expansion studies of cubic fluorite-type MgF2 up to 135 GPa
325
Thermal stability and thermal property characterisation of Fe–14.4Cr–15.4Ni–2.4Mo–2.36Mn–0.25Ti–1.02Si–0.042C–0.04P–0.005B (mass%) austenitic stainless steel (Alloy D9I)
326
Thermal stability and thermodynamic properties of tristetrahydrofuranates lanthanide borohydrides
327
Thermal stability and transport studies of (100 − 2x)TeO2–xAg2O–xWO3 (7.5 ≤ x ≤ 30) glass system
328
Thermal stability and viscoelastic properties of MF/PVAc hybrid resins on the adhesion for engineered flooring in under heating system; ONDOL
329
Thermal stability and water effect on ion-exchange resins in ethyl octyl ether production at high temperature Original Research Article
330
Thermal stability and water uptake of high performance epoxy layered silicate nanocomposites
331
Thermal stability behaviors of Cr(N,O)/CrN double-layered coatings by TGA/DTA analysis
332
Thermal stability characterization for practical use of quantum-dot based global optical sensor on anodized-aluminum
333
Thermal stability characterization of n-alkanes from determination of produced aromatics
334
Thermal stability characterization of n-alkanes from determination of produced aromatics
335
Thermal stability during annealing of friction stir welded aluminum sheet produced by constrained groove pressing
336
Thermal stability enhancement of hybrid Ni2Al3/Ni coatings on creep resistant ferritic steels by a mechanism of thermodynamically constrained interdiffusion
337
Thermal stability evaluation of palm oil as energy transport media
338
Thermal stability evaluation of β-artemether by DSC and ARC
339
Thermal stability for a reactive viscous flow in a slab
340
Thermal Stability Improvement of Ni–Germano silicide Utilizing Ni–Pd Alloy for Nanoscale CMOS Technology
341
Thermal stability in air of surface nitrided 3Y-TZP
342
Thermal stability in precision cosmology experiments: the Planck LFI case
343
Thermal stability in precision cosmology experiments: the Planck LFI case
344
Thermal stability increase of doped poly (3-hexadecylthiophene) by γ-radiation
345
Thermal stability investigation of organo-acid-activated clays by TG-MS and in situ XRD techniques
346
Thermal stability investigation of pyridine substituted tosyl oximes
347
Thermal stability of (beta)-lactoglobulins A and B: effect of SDS, urea, cysteine and N-ethylmaleimide
348
Thermal stability of [Mn(III)(O)2Mn(IV)(H2O)2(Terpy)2](NO3)3 (Terpy = 2,2′:6′,2″-terpyridine) in aqueous solution
349
Thermal stability of {1 1 0} facet terminated gold nanobelts
350
Thermal stability of 1.55 μm quantum well laser structures grown by gas-source molecular beam epitaxy
351
Thermal stability of 12-tungstophosphoric acid supported on zirconia Original Research Article
352
Thermal stability of 3-deoxyanthocyanidin pigments
353
Thermal stability of a C60-polystyrene bond
354
Thermal stability of a Co/Cu giant magnetoresistance (GMR) multilayer system
355
Thermal stability of a Co/Cu giant magnetoresistance (GMR) multilayer system
356
Thermal stability of a fullerene-amine adduct
357
Thermal stability of a high surface area ceria under reducing atmosphere Original Research Article
358
Thermal stability of a low Tg phosphate glass investigated by DSC, XRD and solid state NMR
359
Thermal stability of a nanostructured aluminium alloy
360
Thermal stability of a nonuniformly heat generating annular fluid layer
361
Thermal stability of a novel polytriazole resin
362
Thermal stability of a partly Fe-intercalated GaSe film
363
Thermal stability of a plastic bonded explosive
364
Thermal stability of a reactive viscous flow through a porous-saturated channel with convective boundary conditions
365
Thermal stability of a silica-rich vanadium tailing based geopolymer
366
Thermal stability of a ureidopyrimidinone model compound
367
Thermal stability of Ag films in air prepared by thermal evaporation
368
Thermal stability of Al1−xInxN (0 0 0 1) throughout the compositional range as investigated during in situ thermal annealing in a scanning transmission electron microscope Original Research Article
369
Thermal stability of Al20Ti2Nd in rapidly solidified Al–6Nd–2.5Ti alloy by planar flow casting
370
Thermal stability of Al20Ti2Nd in rapidly solidified Al–6Nd–2.5Ti alloy by planar flow casting
371
Thermal stability of Al3(Scx,Zr1−x)-dispersoids in extruded aluminium alloys
372
Thermal stability of AlCoCrCuFeNi high entropy alloy thin films studied by in-situ XRD analysis
373
Thermal stability of alkoxy monolayers grafted on Si(1 1 1)
374
Thermal stability of alkyl carbonate mixed-solvent electrolytes for lithium ion cells
375
Thermal stability of alumina aerogel doped with yttrium oxide, used as a catalyst support for the thermocatalytic cracking (TCC) process: An investigation of its textural and structural properties Original Research Article
376
Thermal stability of alumina thin films containing γ-Al2O3 phase prepared by reactive magnetron sputtering
377
Thermal stability of aluminum cold rolled to large strain
378
Thermal stability of amine methyl phosphonate scale inhibitors
379
Thermal stability of amino acids in seafloor sediment in aqueous solution at high temperature
380
Thermal stability of amino acids in siliceous ooze under alkaline hydrothermal conditions
381
Thermal stability of ammonium dinitramide
382
Thermal stability of amorphous Mg50Ni50 alloy produced by mechanical alloying
383
Thermal stability of an SCS-6/Ti-22Al-23Nb composite
384
Thermal stability of an SCS-6/Ti-22Al-23Nb composite
385
Thermal stability of an ultrafine grain β-Ti alloy
386
Thermal stability of an ultrathin hafnium oxide film on plasma nitrided Si(100)
387
Thermal Stability of Animal Tallow used in Kebab Preparation
388
Thermal stability of anthocyanins and colourless phenolics in pomegranate (Punica granatum L.) juices and model solutions
389
Thermal stability of antioxidants obtained from wood and industrial wastes
390
Thermal stability of aqueous acetate and variations in product composition under different experimental conditions
391
Thermal stability of artinite, dypingite and brugnatellite—Implications for the geosequestration of green house gases
392
Thermal stability of A-site ordered PrBaMn2O6 manganites Original Research Article
393
Thermal stability of atmospheric plasma sprayed (Ni, Cu, Co)–YSZ and Ni–Cu–Co–YSZ anodes cermets for SOFC application Original Research Article
394
Thermal stability of atomically flat metal nanofilms on metallic substrates
395
Thermal stability of atomic-layer-deposited ultra-thin niobium oxide film on Si (1 0 0)
396
Thermal stability of austenite retained in bainitic steels
397
Thermal stability of azurite and malachite in relation to the formation of mediaeval glass and glazes
398
Thermal stability of B in poly-SiGe on SiON
399
Thermal stability of beam sensitive atmospheric aerosol particles in electron probe microanalysis at liquid nitrogen temperature
400
Thermal stability of bioactive enzymatic papers
401
Thermal stability of biodiesel and its blends: A review
402
Thermal stability of biodiesel in supercritical methanol
403
Thermal stability of black carbon characterised by oxidative differential scanning calorimetry
404
Thermal stability of boron electrical activation in preamorphised ultra-shallow junctions
405
Thermal stability of boron subphthalocyanines as a function of the axial and peripheral substitution
406
Thermal Stability of Bovine Milk Immunoglobulin G (lgG) and the Effect of Added Thermal Protectants on the Stability
407
Thermal stability of brine foams for shale gas drilling
408
Thermal stability of bulk and silica supported chromium trioxide Original Research Article
409
Thermal stability of bulk nanocrystalline Ti–10V–2Fe–3Al alloy
410
Thermal stability of carbon nanotubes under 5.5GPa
411
Thermal stability of carbon nanotubes, fullerene and graphite under spark plasma sintering
412
Thermal stability of carbon phases recovered from shock-loaded fullerites
413
Thermal stability of CdZnO thin films grown by molecular-beam epitaxy
414
Thermal stability of cellulose and their nanoparticles: Effect of incremental increases in carboxyl and aldehyde groups
415
Thermal stability of chemically denatured green fluorescent protein (GFP): A preliminary study
416
Thermal stability of cis-dithiocyanato(2,2′-bipyridyl4,4′dicarboxylate) ruthenium(II) photosensitizer in the free form and on nanocrystalline TiO2 films
417
Thermal Stability of Clay s Galleries in Polypropylene - Clay (montmorillonite) Nanocomposites using Polypropylene-g- Maleic Anhydride as Compatibilizer
418
Thermal stability of cluster arrays of group III elements on Si(111) surface
419
Thermal stability of Co/Hf and Co/Ti bilayers on SiO2
420
Thermal stability of co-extruded U–Zr/Zr–Nb alloys
421
Thermal stability of composite phase change material microcapsules incorporated with silver nano-particles
422
Thermal stability of composite slab-structures in harsh environment
423
Thermal stability of composites containing HCl-doped polyaniline and Fe nanoparticles
424
Thermal stability of connective tissue from porcine muscles
425
Thermal stability of CopA, a polytopic membrane protein from the hyperthermophile Archaeoglobus fulgidus
426
Thermal stability of Cr clusters on SrTiO3(1 0 0)
427
Thermal stability of Cr–Cr3Si eutectic microstructures Original Research Article
428
Thermal stability of CrN/AlN superlattice coatings
429
Thermal stability of CrNx nanometric coatings deposited on stainless steel
430
Thermal stability of Cu0.3(SSe20)0.7 chalcogenide glass by differential scanning calorimetry
431
Thermal stability of defect complexes due to high dose MeV implantation in silicon
432
Thermal stability of dibenzothiophene in closed system pyrolysis: Experimental study and kinetic modelling
433
Thermal stability of Dion–Jacobson mixed-metal-niobate double-layered perovskites
434
Thermal stability of disordered carbon negative-electrode materials prepared from peanut shells
435
Thermal stability of doped CVD κ-Al2O3 coatings
436
Thermal stability of double-ceramic-layer thermal barrier coatings with various coating thickness
437
Thermal stability of dye-sensitized solar cells with current collecting grid
438
Thermal stability of ECAP processed pure copper
439
Thermal stability of electrodeposited nanocrystalline Co-1.1at.%P
440
Thermal stability of electrodeposited nanocrystalline Co-1.1at.%P Original Research Article
441
Thermal Stability of Electrodeposited Nanocrystalline Ni-and Co-Based Materials Original Research Article
442
Thermal stability of electrodeposited nanocrystalline Ni–Co alloys
443
Thermal stability of electrodeposited nickel on vanadium: evidence for oxygen diffusion and intermetallic phase formation
444
Thermal stability of epoxy-silica hybrid materials by thermogravimetric analysis
445
Thermal stability of ettringite in alkaline solutions at 80 °C
446
Thermal stability of expanded perlite modified by mullite
447
Thermal stability of extracellular hemoglobin of Glossoscolex paulistus: Determination of activation parameters by optical spectroscopic and differential scanning calorimetric studies Original Research Article
448
Thermal stability of fatty acids in subcritical water
449
Thermal stability of fatty acids in subcritical water
450
Thermal stability of fish natural actomyosin affects reactivity to cross-linking by microbial and fish transglutaminases
451
Thermal stability of fluorine-intercalated carbon fibres
452
Thermal stability of folic acid
453
Thermal stability of free bromelain and bromelain-polyphenol complex in pineapple juice
454
Thermal stability of friction stir processed ultrafine grained AlMgSc alloy
455
Thermal stability of fullerene-linked oligoaniline star macromolecules
456
Thermal stability of functionalized carbon nanotubes studied by in situ transmission electron microscopy
457
Thermal stability of gamma irradiation induced defects for different fused silica
458
Thermal stability of GaN powders in the flowing stream of N2 gas
459
Thermal stability of gelatin gels: Effect of preparation conditions on the activation energy barrier to melting
460
Thermal stability of generic barium sulphate scale inhibitor species under static and dynamic conditions
461
Thermal stability of glass evaluated by the induction period of crystallization
462
Thermal stability of glasses from the Fe4(P2O7)3–Fe(PO3)3 system
463
Thermal stability of glucose and other sugar aldoses in normal phase high performance liquid chromatography
464
Thermal stability of gold nanorods in an aqueous solution
465
Thermal stability of graphite anode with electrolyte in lithium-ion cells
466
Thermal stability of graphite oxide
467
Thermal stability of habit modified ammonium nitrate: Insights from isoconversional kinetic analysis
468
Thermal stability of hard TiN/SiNx multilayer coatings with an equiaxed microstructure
469
Thermal stability of hard transparent AlxCoCrCuFeNi oxide thin films
470
Thermal stability of heat-treated flame-synthesized anatase TiO2 nanoparticles
471
Thermal stability of heavily deformed Ag–10 wt.%Cu microcomposite wires
472
Thermal stability of Hf-based high-k dielectric films on silicon for advanced CMOS devices
473
Thermal stability of HfO2 nanotube arrays
474
Thermal stability of Hibiscus sabdariffa L. anthocyanins in solution and in solid state: effects of copigmentation and glass transition
475
Thermal stability of high surface area silicon carbide materials
476
Thermal Stability of Horse Spleen Apoferritin and Human Recombinant H Apoferritin
477
Thermal stability of humic substances and their metal forms: an investigation using FTIR emission spectroscopy
478
Thermal stability of hydrogen-doped AZO thin films for photovoltaic applications
479
Thermal stability of hydrostatically extruded EUROFER 97 steel
480
Thermal stability of IGBT high-frequency operation
481
Thermal stability of in situ formed Si3N4–Si2N2O–TiN composites
482
Thermal stability of in situ synthesized (TiB + La2O3)/Ti composite
483
Thermal stability of indium nanocrystals: A theoretical study
484
Thermal stability of InN epilayers grown by high pressure chemical vapor deposition
485
Thermal stability of inorganic and organic compounds in atmospheric particulate matter
486
Thermal stability of intermediate band behavior in Ti implanted Si
487
Thermal stability of ionic liquid BMI(BF4) in the presence of nucleophiles
488
Thermal stability of ionic liquid-loaded electrospun poly(vinylidene fluoride) membranes and its influences on performance of electrochromic devices
489
Thermal stability of iron nitrides prepared by mixing laser and plasma beam nitriding technology
490
Thermal stability of iron nitrides prepared by mixing laser and plasma beam nitriding technology
491
Thermal stability of Ir–Re coatings annealed in oxygen-containing atmospheres
492
Thermal stability of lactic acid bacteria metabolites and its application in preservation of tomato pastes
493
Thermal stability of ladderane lipids as determined by hydrous pyrolysis
494
Thermal stability of LDPE, iPP and their blends
495
Thermal stability of light-induced defects in hydrogenated amorphous silicon: Effect on defect creation kinetics and role of network microstructure
496
Thermal stability of LiPF6 salt and Li-ion battery electrolytes containing LiPF6
497
Thermal stability of LiPF6/EC + DEC electrolyte with charged electrodes for lithium ion batteries
498
Thermal stability of LiPF6–EC:EMC electrolyte for lithium ion batteries
499
Thermal stability of Li-related 1D defects in ZnSe:Li/GaAs grown by MBE
500
Thermal stability of LixCoO2 cathode for lithium ion battery
501
Thermal stability of Ln2NiO4+δ (Ln: La, Pr, Nd) and their chemical compatibility with YSZ and CGO solid electrolytes
502
Thermal stability of low dimensional crystals
503
Thermal stability of low dimensional crystals
504
Thermal stability of low temperature ionic liquids revisited
505
Thermal stability of magnetic characteristics in Tb40(FeCoV)60 films
506
Thermal stability of magnetron sputtered amorphous Si2C
507
Thermal stability of magnetron sputtered Zr–Si–N films
508
Thermal stability of mechanically alloyed boride/Ti50Cu18Ni22Al4Sn6 glassy alloy composites
509
Thermal stability of mechanically alloyed nitride/amorphous Zr65Al7.5Cu17.5Ni10 alloy composites
510
Thermal stability of mercaptan terminated self-assembled multilayer films on SiO2 surfaces
511
Thermal stability of mercury captured by ash
512
Thermal stability of mesoporous boron nitride templated with a cationic surfactant
513
Thermal stability of metastable austenite in rapidly solidified chromium–molybdenum–vanadium tool steel powder
514
Thermal stability of metastable austenite in rapidly solidified chromium–molybdenum–vanadium tool steel powder
515
Thermal stability of microstructure and mechanical properties of Ni/Ru multilayers
516
Thermal stability of mixed-cation α-sialon ceramics
517
Thermal stability of mixed-cation α-sialon ceramics
518
Thermal stability of mixed-cation α-sialon ceramics
519
Thermal stability of mixed-valent diruthenium (II,III) carboxylates
520
Thermal stability of model Al–Li alloys after severe plastic deformation—Effect of the solute Li atoms
521
Thermal Stability of Mononuclear Hydroperoxocopper(II) Species. Effects of Hydrogen Bonding and Hydrophobic Field
522
Thermal stability of montmorillonite polyacrylamide and polyacrylate nanocomposites and adsorption of Fe(III) ions
523
Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA
524
Thermal stability of nanocomposite metals: In situ observation of anomalous residual stress relaxation during annealing under synchrotron radiation Original Research Article
525
Thermal stability of nanocrystalline Fe-10 wt.% Al produced by cryogenic mechanical alloying
526
Thermal stability of nanocrystalline Fe–Cr alloys with Zr additions
527
Thermal stability of nanocrystalline Fe–Zr alloys
528
Thermal stability of nanocrystalline layers fabricated by surface nanocrystallization
529
Thermal stability of nanocrystalline Ni
530
Thermal stability of nanocrystalline Ni
531
Thermal stability of nanocrystalline Ni silicides synthesized by mechanical alloying
532
Thermal stability of nanocrystalline Ni silicides synthesized by mechanical alloying
533
Thermal stability of nanocrystalline nickel–18 at.% tungsten alloy investigated with the tomographic atom probe
534
Thermal stability of nanocrystalline Pd81Zr19 Original Research Article
535
Thermal stability of nanocrystalline structure in niobium processed by high pressure torsion at cryogenic temperatures
536
Thermal stability of nanocrystallized surface produced by surface mechanical attrition treatment in aluminum alloys
537
Thermal stability of nano-RuAl produced by mechanical alloying Original Research Article
538
Thermal stability of nanoscale helium bubbles in a 14YWT nanostructured ferritic alloy
539
Thermal stability of nanoscale silver metallization in Ag/W/Co/Si(1 0 0) multilayer
540
Thermal stability of nanostructured 13 wt% Al2O3–8 wt% Y2O3–ZrO2 thermal barrier coatings
541
Thermal stability of nanostructured Al93Fe3Cr2Ti2 alloys prepared via mechanical alloying Original Research Article
542
Thermal stability of nanostructured aluminum powder synthesized by high-energy milling
543
Thermal stability of nano-structured ferritic alloy
544
Thermal stability of nanostructured superhard coatings: A review
545
Thermal stability of neutron irradiation effects on KU1 fused silica
546
Thermal stability of Ni/NiO multilayers
547
Thermal stability of nickel silicide on silicon on insulator (SOI) material
548
Thermal stability of Ni–Mn electrodeposits Original Research Article
549
Thermal stability of Ni–Pt–Ta alloy silicides on epi-Si1−xCx
550
Thermal stability of octadecylsilane hybrid silicas prepared by grafting and sol–gel methods
551
Thermal stability of octadecyltrichlorosilane self-assembled on a polycrystalline aluminium surface
552
Thermal stability of ordered mesoporous yttria-stabilized zirconia
553
Thermal stability of organofunctional polysiloxanes
554
Thermal stability of oxide particles in 12Cr ODS steel
555
Thermal stability of oxide superconductors in flux flow state
556
Thermal stability of oxygenated functions in activated carbons
557
Thermal stability of Pb(Zn13Nb23)O3 (PZN) and consideration of stabilization conditions of perovskite type compounds
558
Thermal stability of Pd or Pt loaded Ce0.68Zr0.32O2 and Ce0.50Zr0.50O2 catalyst materials under oxidising conditions
559
Thermal stability of phase change materials used in latent heat energy storage systems: A review
560
Thermal stability of photosensitive Bragg gratings in sputter-deposited germanosilicate glass
561
Thermal stability of PI3 nitrided surface layers on ferritic steels
562
Thermal stability of piezoelectricity for porous polytetrafluoroethylene electret film
563
Thermal stability of poly (4,4′-methylenedianiline) salts and their bases
564
Thermal Stability of Poly((RHO)-phenylenebenzobisoxazole) Fibres
565
Thermal Stability of Poly(ether ether ketone) Composites under Dry-sliding Friction and Wear Conditions
566
Thermal stability of poly(trimethylene terephthalate)
567
Thermal stability of polyaniline networks in conducting polymer blends
568
Thermal stability of polypyrrole prepared from a ternary eutectic melt
569
Thermal stability of porous MoOx and its catalytic property for the conversion of 2-propanol Original Research Article
570
Thermal stability of POSS/methylsilicone nanocomposites
571
Thermal stability of propylene carbonate and ethylene carbonate–propylene carbonate-based electrolytes for use in Li cells
572
Thermal Stability of Pt/Al2O3 Catalysts Prepared by Sol-Gel
573
Thermal stability of pulsed laser deposited iridium oxide thin films at low oxygen atmosphere
574
Thermal stability of radiation-induced free radicals in γ-irradiated l-alanine single crystals
575
Thermal stability of RE5(SixGe1−x)3 plates in RE5(SixGe1−x)4 alloys, where RE = Gd and Ho
576
Thermal stability of reactive sputtered tungsten oxide coatings
577
Thermal stability of refractory carbide/boride composites
578
Thermal stability of reinforced Nb3Sn composite superconductor under cryocooled conditions Original Research Article
579
Thermal Stability of Retained Austenite in TRIP Steel After Different Treatments Original Research Article
580
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling
581
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling Original Research Article
582
Thermal stability of SiGe films on an ultra thin Ge buffer layer on Si grown at low temperature
583
Thermal stability of silica supported palladium catalysts prepared by the sol-gel method Original Research Article
584
Thermal stability of silica-coated magnetite nanoparticles prepared by an electrochemical method
585
Thermal stability of silver sulfathiazole–epoxy resin network
586
Thermal stability of silver sulfathiazole–epoxy resin network
587
Thermal stability of size-selected arrays of gold nanoparticles on () sapphire – A thermal desorption spectroscopy study
588
Thermal stability of slow and fast cure EVA encapsulant material for photovoltaic module manufacturing process
589
Thermal stability of sodium-nitrogen-C60 superconductor prepared from Na-azide
590
Thermal stability of soil organic matter pools and their δ13C values after C3–C4 vegetation change
591
Thermal stability of soil organic matter pools and their δ13C values after C3–C4 vegetation change
592
Thermal stability of sol–gel p-type Al–N codoped ZnO films and electric properties of nanostructured ZnO homojunctions fabricated by spin-coating them on ZnO nanorods Original Research Article
593
Thermal stability of solid and aqueous solutions of humic acid
594
Thermal stability of solid dispersions of naphthalene derivatives with β-cyclodextrin and β-cyclodextrin polymers
595
Thermal stability of some cryogels based on poly(vinyl alcohol) and cellulose
596
Thermal stability of some cryogels based on poly(vinyl alcohol) and cellulose
597
Thermal stability of soy protein isolate and hydrolysate ingredients
598
Thermal stability of spent coffee ground polysaccharides: Galactomannans and arabinogalactans
599
Thermal stability of sputtered Al2O3 coatings
600
Thermal stability of sputtered Ni–P and Ni–P–Cr coatings during cycling test and annealing treatment
601
Thermal stability of SrRuO3 epitaxial layers under forming-gas anneal
602
Thermal stability of submicron grained copper and nickel
603
Thermal stability of submicron grained copper and nickel
604
Thermal stability of succinate and acetate on a Cu(1 1 0) surface
605
Thermal stability of superhard nanocomposite coatings consisting of immiscible nitrides
606
Thermal stability of superhard Ti–B–N coatings
607
Thermal stability of TaN Schottky contacts on n-GaN Original Research Article
608
Thermal stability of TaN, CrTaN, TaSiN, and CrTaSiN hard coatings in oxygen-containing atmospheres
609
Thermal stability of Ta–Si–N nanocomposite thin films at different nitrogen flow ratios
610
Thermal stability of ternary transition metal heteropoly complexes
611
Thermal stability of the ‘cave’ mineral brushite CaHPO4·2H2O – Mechanism of formation and decomposition
612
Thermal stability of the asphaltene/kerogen vanadyl porphyrins
613
Thermal stability of the Co/β-Si3N4/Si(111) interface: A photoemission study
614
Thermal stability of the Co/β-Si3N4/Si(111) interface: A photoemission study
615
Thermal Stability of the Co-Mo-S Structure As Studied by a CVD Technique Using Co(CO)3NO
616
Thermal stability of the cubic phase in Ba0.5Sr0.5Co0.8Fe0.2O3 - δ (BSCF)1
617
Thermal stability of the eutectic composition in LiNO3–NaNO3–KNO3 ternary system used for thermal energy storage
618
Thermal stability of the exchange-biased NiFe/IrMn/CoFe electrode in the magnetic tunnel junctions
619
Thermal stability of the FeIIIEDTA complex in its monomeric form
620
Thermal stability of the grain structure in the W-2V and W-2V-0.5Y2O3 alloys produced by hot isostatic pressing
621
Thermal stability of the high-N solid-solution layer on stainless steel
622
Thermal stability of the human blood serum acid α1-glycoprotein in acidic media Original Research Article
623
Thermal stability of the interface between discharged non-graphitizable carbon and electrolyte for lithium-ion batteries Original Research Article
624
Thermal stability of the linoleic acid/α- and β-cyclodextrin complexes
625
Thermal stability of the martensitic transformation of Cu–Al–Ni–Mn–Ti
626
Thermal stability of the Mobil Five type metallosilicate molecular sieves—An in situ high temperature X-ray diffraction study
627
Thermal stability of the non-equilibrium cation distribution in nanocrystalline high-energy milled spinel ferrite
628
Thermal stability of the non-equilibrium cation distribution in nanocrystalline high-energy milled spinel ferrite
629
Thermal stability of the Pd-Al alloy Schottky contacts to n-GaAs
630
Thermal stability of the Pd-Al alloy Schottky contacts to n-GaAs
631
Thermal Stability of the Perovskite BaBiO3
632
Thermal stability of the soil minerals destinezite and diadochite Fe3+2(PO4)(SO4)(OH)·6H2O – Implications for soils in bush fires
633
Thermal stability of the structural features in the superhydrophobic boehmite films on austenitic stainless steels
634
Thermal stability of the Ta(1 1 1) surface covered with chemisorbed metal layer. Part I: Au
635
Thermal stability of the Ta(1 1 1) surface covered with chemisorbed metal layer. Part II: Ag
636
Thermal Stability of Thin Rectangular Plates with Variable Thickness Made of Functionally Graded Materials
637
Thermal stability of thiol and silane monolayers: A comparative study
638
Thermal stability of thiophene biomarkers as studied by hydrous pyrolysis
639
Thermal stability of Ti/Al/Pt/Au and Ti/Au Ohmic contacts on n-type ZnCdO
640
Thermal stability of Ti3AlC2/Al2O3 composites in high vacuum
641
Thermal stability of Ti3SiC2 thin films Original Research Article
642
Thermal stability of Ti-44Al-4Nb-4Hf-0.2Si-1B alloy
643
Thermal stability of Ti–44Al–4Nb–4Zr–0.2Si–1B alloy
644
Thermal stability of Ti–44Al–8Nb–1B alloy
645
Thermal stability of Ti–46Al–5Nb–1W alloy
646
Thermal stability of Ti–46Al–5Nb–1W alloy
647
Thermal stability of TiAlN/CrN multilayer coatings studied by atom probe tomography
648
Thermal stability of TiAlN/CrN multilayer coatings studied by atom probe tomography
649
Thermal stability of TiN thin films investigated by DTG/DTA
650
Thermal stability of titanate nanorods and titania nanowires formed from titanate nanotubes by heating
651
Thermal stability of titania films prepared on titanium by micro-arc oxidation
652
Thermal stability of titanium nitride coatings prepared by the mixing technology with laser and plasma
653
Thermal stability of triple helical DNAs containing 2′-deoxyinosine and 2′-deoxyxanthosine Original Research Article
654
Thermal stability of tungsten carbide in 7 mol.% calcia–zirconia solid solution matrix heat treated in argon
655
Thermal stability of tungsten nitride films deposited by reactive magnetron sputtering
656
Thermal stability of twin-roll cast Al–Fe–Mn–Si sheets accumulative roll bonded at different temperatures
657
Thermal stability of ultrafine grained Fe–Cr–Ni alloy
658
Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions
659
Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions
660
Thermal stability of ultrafine-grained austenitic stainless steels
661
Thermal stability of ultrafine-grained copper during high speed micro-extrusion
662
Thermal stability of ultra-shallow junctions in silicon formed by molecular-beam epitaxy using boron delta doping
663
Thermal stability of ultra-thin CoSi, films on Si(lOO)-2 X 1 surfaces
664
Thermal stability of unsupported gold nanoparticle: a molecular dynamics study
665
Thermal stability of UV-irradiated collagen in bovine lens capsules and in bovine cornea
666
Thermal stability of Vale Inco nanonometric nickel as a catalytic additive for magnesium hydride (MgH2)
667
Thermal stability of vanadia-tungsta-titania catalysts in the SCR process
668
Thermal stability of W1 − xSixSi multilayer reflective coatings under high intensity excimer laser pulses
669
Thermal stability of W2B and W2B5 contacts on ZnO
670
Thermal stability of water and hydroxyl on the surface of the Moon from temperature-programmed desorption measurements of lunar analog materials
671
Thermal stability of wild type and disulfide bridge containing mutant of poplar plastocyanin Original Research Article
672
Thermal stability of working fluids for organic Rankine cycles: An improved survey method and experimental results for cyclopentane, isopentane and n-butane
673
Thermal stability of WSix and W ohmic contacts on GaN
674
Thermal stability of WSix and W ohmic contacts on GaN
675
Thermal stability of yeast hydrolysate as a novel anti-obesity material
676
Thermal stability of zircon (ZrSiO4)
677
Thermal stability of ZnO thin film prepared by RF-magnetron sputtering evaluated by thermal desorption spectroscopy
678
Thermal stability of ZrN–Ni and CrN–Ni superhard nanocomposite coatings
679
Thermal stability of β-tricalcium phosphate doped with monovalent metal ions
680
Thermal stability of β-xylanases produced by different Thermomyces lanuginosus strains
681
Thermal stability of γ-Al2O3 coatings for challenging cutting operations
682
Thermal stability of γ-alumina PVD coatings and analysis of their performance in machining of austenitic stainless steels
683
Thermal stability studies for advanced Hafnium and Zirconium ALD precursors
684
Thermal stability studies of atmospheric plasma deposited siloxane films deposited on Vycor™ glass
685
Thermal stability studies of CVD-grown graphene nanoribbons: Defect annealing and loop formation
686
Thermal stability studies of polyamides and their block copolymers
687
Thermal stability studies on clay nanocomposites prepared from a degradable poly(ester amide) constituted by glycolic acid and 6-aminohexanoic acid
688
Thermal stability study of La0.9Sr0.1Ga0.8Mg0.2O2.85–(Li/Na)2CO3 composite electrolytes for low-temperature solid oxide fuel cells
689
Thermal stability study of nitro-rich triazole derivatives using temperature dependent time resolved pulsed photoacoustic (PA) technique
690
Thermal stability study of nitro-rich triazole derivatives using temperature dependent time resolved pulsed photoacoustic (PA) technique
691
Thermal stability study of SDC/Na2CO3 nanocomposite electrolyte for low-temperature SOFCs
692
Thermal stability study of the bridging CO2 complex, [tBu3P-(μ-CO2)-B(C6F5)3]
693
Thermal Stability, Conductivity, and Band Gaps of Oligo-2-[(phenylimino) methyl] Phenol and Oligomer-metal Complexes.
694
Thermal stability, corrosion resistance and nano-indentation behavior of Ni60Nb40-XZrX (X= 0, 20, 40) amorphous alloys
695
Thermal stability, crystallization, structure and morphology of syndiotactic 1,2-polybutadiene/organoclay nanocomposite
696
Thermal stability, dynamic mechanical analysis and nanoindentation behavior of FeSiB(Cu) amorphous alloys
697
Thermal stability, electrical conductivity and ammonia sensing studies on p-toluenesulfonic acid doped polyaniline:titanium dioxide (pTSA/Pani:TiO2) nanocomposites
698
Thermal stability, flame retardancy and mechanical properties of cotton fabrics treated with inorganic coatings synthesized through sol–gel processes
699
Thermal stability, hydrogen adsorption and separation performance of Ni-based amorphous alloy membranes
700
Thermal stability, magnetic and mechanical properties of Fe–Dy–B–Nb bulk metallic glasses with high glass-forming ability
701
Thermal stability, mechanical and electrical properties of nanocrystalline Cu3Ge
702
Thermal stability, mechanical properties and nano-imprint ability of Pd-Cu-Ni-P glassy alloy thin film
703
Thermal stability, oxygen non-stoichiometry and transport properties of LaNi0.6Fe0.4O3
704
Thermal stability, spectra and laser properties of Yb: lead–zinc–telluride oxide glasses
705
Thermal stability, structural modifications and ion exchange properties of magnesium silicate Original Research Article
706
Thermal stability, sublimation pressures and diffusion coefficients of some metal acetylacetonates
707
Thermal stability, synthesis of new formazan complexes derived from thiophene-2-carboxaldehyde
708
Thermal stability, texture, liquid holding capacity and colour of smoked salmon on retail level
709
Thermal stabilization and decomposition of simple glycosides in the presence of aromatic substances in closed ampoules: The role of OH⋯π hydrogen bonding
710
Thermal stabilization and decomposition of simple glycosides in the presence of aromatic substances in closed ampoules: The role of OH⋯π hydrogen bonding
711
Thermal stabilization and hydrogen storage properties of Mg–40 wt% composite prepared by mechanical milling
712
Thermal stabilization and plasticization of poly(vinyl chloride) by ester thiols: Update and current status
713
Thermal stabilization of anomalies in inhomogeneous conducting structures
714
Thermal stabilization of catalyst supports and their application to high-temperature catalytic combustion Original Research Article
715
Thermal Stabilization of CexZr1-xO2 Oxygen Storage Promoters by Addition of Al2O3: Effect of Thermal Aging on Textural, Structural, and Morphological Properties
716
Thermal stabilization of formaldehyde dehydrogenase by encapsulation in liposomes with nicotinamide adenine dinucleotide
717
Thermal stabilization of levoglucosan in aromatic substances
718
Thermal Stabilization of Poly(vinyl chloride) by Metal Carboxylates of Ximenia americana Seed Oil Under Inert Condition
719
Thermal stabilization of tellurium in mineral acids solutions: Use of permanent modifiers for its determination in sulfur by GFAAS
720
Thermal stabilization of trypsin with glycol chitosan
721
Thermal stable Eu-doped CaTiO3 phosphors with morphology-control for high-power tricolor white LEDs
722
Thermal stable superhydrophobic polyphenylsilsesquioxane/nanosilica composite coatings
723
Thermal start-up behaviour and thermal management of SOFCʹs
724
Thermal state and complex geology of a heterogeneous salty crust of Jupiterʹs satellite, Europa
725
Thermal state and concentration of gas hydrate and free gas of Coyhaique, Chilean Margin (44°30′ S)
726
Thermal state and redox conditions of the Kaapvaal mantle: A study of xenoliths from the Finsch mine, South Africa
727
Thermal state distributions deduced from (2 + 1) resonance enhanced multiphoton ionization of CO
728
Thermal state of grid columns of air heaters.
729
Thermal state of superconducting films on wide substrates Original Research Article
730
Thermal state of the Campi Flegrei caldera inferred from seismic attenuation tomography
731
Thermal state of the upper mantle beneath the Northern Cordilleran Volcanic Province (NCVP), British Columbia, Canada
732
Thermal state, oxygen fugacity and COH fluid speciation in cratonic lithospheric mantle: New data on peridotite xenoliths from the Udachnaya kimberlite, Siberia
733
Thermal state, rheology and seismicity in the pannonian basin, Hungary
734
Thermal states of anyonic systems Original Research Article
735
Thermal statistical ensembles of black holes
736
Thermal statistical ensembles of classical extreme black holes
737
Thermal steam explosion pretreatment to enhance anaerobic biodegradability of the solid fraction of pig manure
738
Thermal step bunching on the restricted solid-on-solid model with point contact inter-step attractions
739
Thermal sterilization of canned food in a 3-D pouch using computational fluid dynamics Original Research Article
740
Thermal stimulation causes tooth deformation: A possible alternative to the hydrodynamic theory?
741
Thermal stimulation of TRPV1 up-regulates TNFα expression in human periodontal ligament cells
742
Thermal stochastic collision model in turbulent gas–solid pipe flows
743
Thermal storage and nonlinear heat-transfer characteristics of PCM wallboard
744
Thermal storage efficiencies of two solar saltless water ponds
745
Thermal storage material from inertized wastes: Evolution of structural and radiative properties with temperature
746
THERMAL STRAIGHTENING OF STRUCTURAL SHAPES
747
Thermal strain analysis in optical planar waveguides
748
THERMAL STRAIN AND EXPANSION COEFFICIENT OF PbSb ALLOY UNDER STATIC AND DYNAMIC LOADING
749
Thermal strain and magnetization of the ferromagnetic shape memory alloy Ni52Mn25Ga23 in a magnetic field Original Research Article
750
Thermal strain imaging of chalcogenide in a phase change memory
751
Thermal strain in Mg composites Original Research Article
752
Thermal strains in nominally flat dry sliding contacts
753
Thermal stratification and mixing under single- and two-phase flow in rod bundle with axially distributed heat flux in vessel without forced convection
754
Thermal stratification effects on laminar boundary-layer flow over a wedge with suction or injection
755
Thermal stratification effects on non linear MHD laminar boundary—layer flow over a wedge with suction or injection
756
Thermal stratification in a hot water tank established by heat loss from the tank
757
Thermal stratification in ribbed liquid hydrogen storage tanks
758
Thermal Stratification in Saldanha Bay (South Africa) and Subtidal, Density-driven Exchange with the Coastal Waters of the Benguela Upwelling System
759
Thermal stratification in small solar domestic storage tanks caused by draw-offs
760
Thermal stratification in vertical mantle heat-exchangers with application to solar domestic hot-water systems
761
Thermal stratification induced by heating in a non-adiabatic context
762
Thermal stratification produced by plumes and jets in enclosed spaces
763
Thermal stratification within the water tank
764
Thermal strength of the alkali-activated slag concrete
765
Thermal stress analysis for a disk brake of railway vehicles with consideration of the pressure distribution on a frictional surface
766
Thermal Stress Analysis for an Inclusion with Nonuniform Temperature Distribution in an Infinite Kirchhoff Plate
767
Thermal stress analysis for fatigue damage evaluation at a mixing tee
768
Thermal stress analysis for laminated plates using actual temperature field
769
Thermal stress analysis for laminated plates using actual temperature field
770
Thermal stress analysis for rapid thermal processor
771
Thermal stress analysis in annular duct resembling gas turbine transition piece
772
Thermal Stress Analysis in Magneto-Electro-Thermo-Elasticity with a Penny-Shaped Crack Under Uniform Heat Flow
773
Thermal Stress Analysis in Particulate Composite Components
774
THERMAL STRESS ANALYSIS IN THERMOPIEZOELASTIC STRIP WITH AN EDGE CRACK
775
Thermal stress analysis of 1 MW gyrotron collector
776
Thermal Stress Analysis of a Composite Cylinder Reinforced with FG SWCNTs
777
Thermal stress analysis of a directionally solidified Al–1 wt%Ni alloy casting
778
Thermal stress analysis of a planar SOFC stack
779
THERMAL STRESS ANALYSIS OF A RECTANGULAR PLATE AND ITS THERMAL STRESS INTENSITY FACTOR FOR COMPRESSIVE STRESS FIELD
780
Thermal stress analysis of containment building in case of a Main Steam Line Break (MSLB) Original Research Article
781
Thermal stress analysis of cordierite materials subjected to thermal shock
782
Thermal stress analysis of eccentric tube receiver using concentrated solar radiation
783
Thermal stress analysis of FIRE divertor
784
Thermal Stress Analysis of Heavy Truck Brake Disc Rotor
785
Thermal stress analysis of HVOF sprayed WC–Co/NiAl multilayer coatings on stainless steel substrate using finite element methods
786
Thermal stress analysis of jointed plane in concrete pavements
787
Thermal stress analysis of reactor containment building considering severe weather condition
788
Thermal Stress Analysis of Sandwich Structures
789
Thermal stress analysis of the planar SOFC bonded compliant seal design
790
THERMAL STRESS ANALYSIS OF THERMOVISCOELASTIC HOLLOW CYLINDER WITH TEMPERATURE-DEPENDENT THERMAL PROPERTIES
791
Thermal stress analysis of Wc–Co/Cr–Ni multilayer coatings on 316L steel substrate during cooling process
792
Thermal stress and deformation analyses in fiber reinforced polymer composites undergoing heat conduction and mechanical loading
793
Thermal stress and fatigue analysis of plated-through holes using an internal state variable constitutive model
794
Thermal stress and intensity release in ferroelectric materials by multiple cracking
795
Thermal stress and intensity release in ferroelectric materials by multiple cracking Original Research Article
796
Thermal stress and relieving method of the ITER lower vertical stabilization coil
797
Thermal stress and strain distributions of a laboratory scale wall fired furnace: A numerical study and experimental verification
798
Thermal stress and thermal fatigue analysis of the continuous casting tundish cover
799
Thermal stress around a penny-shaped crack in a thermopiezoelectric solid
800
THERMAL STRESS AT AN OFF-ANGLED INTERFACE
801
Thermal Stress Cleaving of Brittle Materials by Laser Beam
802
Thermal stress dependence of magnetic hysteretic processes in core–shell nanoparticles
803
Thermal Stress Development Due to Laser Step Input Pulse Heating
804
Thermal stress evaluation in the steel continuous casting process
805
Thermal stress evolution in continuously quenched circular bars
806
Thermal stress FEM analysis of rock with microwave energy
807
Thermal stress for all-ceramics rolls used in molten metal to produce stable high quality galvanized steel sheet
808
Thermal stress fracture of rigid ceramic filter due to char combustion in collected dust layer on filter surface
809
Thermal stress fracture test of an RF window
810
Thermal stress hysteresis and stress relaxation in an epoxy film
811
Thermal stress in rotating functionally graded hollow circular disks
812
Thermal stress induced band gap variation of ZnO thin films
813
Thermal stress induced microcracking in alumina–20% SiCp composites Original Research Article
814
Thermal stress intensity factor of interfacial cracks of a plasma facing component under high heat flux loading
815
Thermal stress intensity factors for a crack in an anisotropic half plane
816
Thermal Stress Intensity Factors for a Normal Crack in a Piezoelectric Material Strip
817
Thermal stress investigation in unidirectional composites under the hyperbolic energy model
818
THERMAL STRESS MODEL FOR POLYMER SENSORS
819
Thermal stress modeling in cryosurgery
820
THERMAL STRESS OPTIMIZATION IN METAL ROLLING
821
Thermal stress prediction in divertor cooling finger using the local heat transfer distribution
822
THERMAL STRESS PROBLEM FOR MIXED HEAT CONDUCTION BOUNDARY AROUND AN ARBITRARILY SHAPED HOLE WITH CRACK UNDER UNIFORM HEAT FLUX
823
Thermal stress relaxation creep and microstructural evolutions of nanostructured SiC ceramics by liquid phase sintering
824
Thermal stress relaxation in magnesium matrix composites controlled by dislocation breakaway
825
Thermal stress resistance and heat-induced damage of silicon carbide materials for laser mirrors
826
Thermal stress treatment does not affect the stability and protective capacity of goat milk derived E2-marker vaccine formulation against CSFV
827
Thermal stress treatment does not affect the stability and protective capacity of goat milk derived E2-marker vaccine formulation against CSFV
828
Thermal Stressed State of a Box-Shaped Crucible
829
Thermal stressed state of wedge-shaped specimens with thermal-fatigue cracks
830
Thermal stresses and cracking in absorptive solar glazing
831
Thermal Stresses and Cracks During the Growth of Large-sized Sapphire with SAPMAC Method
832
Thermal stresses and deposition patterns in layered manufacturing
833
Thermal stresses and deposition patterns in layered manufacturing
834
Thermal stresses and effective properties calculated for fiber composites using actual cylindrically-anisotropic properties of interfacial carbon coating Original Research Article
835
THERMAL STRESSES AND EFFECTIVE THERMAL EXPANSION COEFFICIENT OF A FUNCTIONALLY GRADIENT SPHERE
836
Thermal stresses and microcracking caused by 211 particles in Y-Ba-Cu-O melt-processed bulks
837
Thermal stresses and microcracking caused by 211 particles in Y-Ba-Cu-O melt-processed bulks
838
Thermal stresses and related phenomena in composite ceramics
839
THERMAL STRESSES AND THERMAL EXPANSION IN A UNIFORMLY HEATED FUNCTIONALLY GRADED CYLINDER
840
THERMAL STRESSES AROUND A CIRCULAR HOLE IN A FUNCTIONALLY GRADED PLATE
841
Thermal Stresses Around a Crack in a Non-Homogeneous Diffusion Layer Between a Coating Plate and an Elastic Half-Plane
842
THERMAL STRESSES AROUND AN INSULATED BARRIER
843
THERMAL STRESSES AROUND THE THIN CIRCULAR DISC-LIKE INCLUSION IN AN INFINITE MEDIUM UNDER GENERAL TEMPERATURE CONDITIONS
844
THERMAL STRESSES AROUND TWO PARALLEL CRACKS IN AN INFINITE ORTHOTROPIC PLATE UNDER UNIFORM HEAT FLOW
845
Thermal stresses developed in weld-bonded joints
846
Thermal stresses due to conjugate oscillatory free convection in an enclosure
847
Thermal stresses due to time exponentially decaying laser pulse: elasto-plastic wave propagations
848
Thermal stresses due to time exponentially decaying laser pulse: elasto-plastic wave propagations
849
Thermal stresses due to time exponentially decaying laser pulse: elasto-plastic wave propagations
850
Thermal stresses during freezing of a two-layer food
851
THERMAL STRESSES FOR AN INFINITE BODY WITH A SPHERICAL CAVITY WITH TWO RELAXATION TIMES
852
THERMAL STRESSES FOR BONDED DISSIMILAR MATERIALS WITH A CIRCULAR-ARC ANTICRACK
853
THERMAL STRESSES IN A CYLINDER WITH LONGITUDINAL CIRCULAR CYLINDRICAL CUTOUTS
854
THERMAL STRESSES IN A FLUID-SATURATED POROELASTIC HOLLOW SPHERE
855
THERMAL STRESSES IN A HARMONIC FIELD FOR AN INFINITE BODY WITH A CIRCULAR CYLINDRICAL HOLE WITHOUT ENERGY DISSIPATION
856
Thermal stresses in a macroscopic graphite particulates reinforced CuAlMn shape memory alloy studied by internal friction
857
THERMAL STRESSES IN A NONHOMOGENEOUS ORTHOTROPIC ELASTIC MULTILAYERED CYLINDER
858
THERMAL STRESSES IN A ONE-SIDED BONDED REPAIR BY A PLATE INCLUSION MODEL
859
Thermal stresses in a plate with a circular reinforcement
860
THERMAL STRESSES IN A RAPIDLY HEATED PLATE USING THE PARABOLIC TWO-STEP HEAT CONDUCTION EQUATION
861
THERMAL STRESSES IN A SPHERICAL SHELL UNDER THREE THERMOELASTIC MODELS
862
Thermal stresses in aluminium alloy die casting dies
863
Thermal stresses in aluminum 6061 and nylon 66 long fiber thermoplastic (LFT) composite joint in a tailcone
864
Thermal stresses in an elastic space with a perfectly rigid flat inclusion under perpendicular heat flow
865
Thermal Stresses in an Infinite Elastic Pipe Weakened by Two Cylindrical Cracks
866
THERMAL STRESSES IN ANNULAR FINS WITH TEMPERATURE-DEPENDENT CONDUCTIVITY UNDER PERIODIC BOUNDARY CONDITION
867
Thermal stresses in boiler tubes arising from high-speed cleaning jets
868
Thermal stresses in boiler tubes arising from high-speed cleaning jets
869
Thermal stresses in boiler tubes arising from high-speed cleaning jets
870
Thermal stresses in cylindrical Cosserat elastic shells
871
THERMAL STRESSES IN ELASTIC-PLASTIC TUBES WITH TEMPERATURE-DEPENDENT MECHANICAL AND THERMAL PROPERTIES
872
Thermal stresses in fibrous composites incorporating hybrid interphase regions
873
THERMAL STRESSES IN FUNCTIONALLY GRADED MATERIALS
874
THERMAL STRESSES IN HETEROGENEOUS ELASTIC CYLINDERS WITH MICROSTRUCTURE
875
Thermal Stresses in Inhomogeneous Porous Elastic Cylinders
876
THERMAL STRESSES IN ISOTROPIC CELL-DIVIDED PARTICLE-MATRIX SYSTEM: SPHERICAL ANDCUBIC CELLS
877
THERMAL STRESSES IN JOINED SEMI-INFINITE SOLIDS
878
Thermal stresses in metal–ceramic specimens for the ISO crack initiation test (three-point flexure bond test)
879
Thermal stresses in Mg–Ag–Nd alloy reinforced by short Saffil fibers studied by internal friction
880
THERMAL STRESSES IN MICROELECTRONICS SUBASSEMBLIES: QUANTITATIVE CHARACTERIZATION USING PHOTOMECHANICS METHODS
881
Thermal stresses in radiant tubes due to axial, circumferential and radial temperature distributions
882
Thermal stresses in radiant tubes: A comparison between recuperative and regenerative systems
883
Thermal stresses in thick-walled pipes subjected to fully developed laminar flow
884
THERMAL STRESSES IN TRIAXIAL ANISOTROPIC PARTICLE-MATRIX SYSTEM
885
Thermal Stresses in Type III Thermo-Elastic Plates
886
THERMAL STRESSES INTENSITY FACTOR FOR FUNCTIONALLY GRADIENT PLATE WITH AN EDGE CRACK
887
THERMAL STRESSES UNDER THE EFFECT OF THE MICROSCOPIC HEAT CONDUCTION MODEL
888
THERMAL STRESS-FOCUSING EFFECT FOLLOWING RAPID NONUNIFORM HEATING OF LONG CYLINDRICAL RODS
889
THERMAL STRESS-FOCUSING EFFECT FOLLOWING RAPID UNIFORM HEATING OF SPHERES AND LONG CYLINDRICAL RODS
890
THERMAL STRESS-FOCUSING EFFECT IN A TRANSVERSELY ISOTROPIC SPHERICAL INCLUSION EMBEDDED IN AN ISOTROPIC INFINITE ELASTIC MEDIUM
891
THERMAL STRESS-FOCUSING EFFECT IN A TRANSVERSELY ISOTROPIC SPHERICAL ZIRCONIA INCLUSION IN AN INFINITE ELASTIC MEDIUM CAUSED BY IMPACT COOLING
892
THERMAL STRESS-FOCUSING IN A TRANSVERSELY ISOTROPIC SPHERE AND AN ISOTROPIC SPHERE
893
Thermal stress-induced fragmentation of quartzite particles in a hot fluidized bed
894
Thermal stress-induced thermoplastic composite debonding, studied by contact electrical resistance measurement
895
Thermal stress-induced thermoplastic composite debonding, studied by contact electrical resistance measurement
896
Thermal striping fatigue damage in multiple edge-cracked geometries
897
Thermal striping limits for components of sodium cooled fast spectrum reactors Original Research Article
898
Thermal structural analysis of SST-1 vacuum vessel and cryostat assembly using ANSYS
899
Thermal structure and CO distribution for the Venus mesosphere/lower thermosphere: 2001–2009 inferior conjunction sub-millimeter CO absorption line observations
900
Thermal structure and composition of Jupiter’s Great Red Spot from high-resolution thermal imaging
901
Thermal Structure and Cooling of Superfluid Neutron Stars with Accreted Magnetized Envelopes
902
Thermal structure and dynamics of subduction zones: insights from observations and modeling
903
Thermal structure and seismicity of subducting lithosphere
904
Thermal structure beneath the Snake River Plain: Implications for the Yellowstone hotspot
905
Thermal structure changes in copper and nickel processed by severe plastic deformation
906
Thermal structure changes in copper and nickel processed by severe plastic deformation
907
Thermal structure of a major crustal shear zone, the basal thrust in the Scandinavian Caledonides
908
Thermal structure of continental upper mantle inferred from S-wave velocity and surface heat flow
909
Thermal structure of continental upper mantle inferred from S-wave velocity and surface heat flow
910
Thermal structure of oceanic and continental lithosphere
911
Thermal structure of putative hydrocarbon lakes on Titan Original Research Article
912
Thermal structure of the Costa Rica – Nicaragua subduction zone
913
Thermal structure of the crust in Inner East Anatolia from aeromagnetic and gravity data
914
Thermal Structure of the Crust Under High-Grade Metamorphic Conditions: Symposium G-8 at EUG-10
915
Thermal Structure of the Ionian Slab
916
Thermal structure of the Martian atmosphere retrieved from the IR spectrometry in the 15 μm CO2 band: input to MIRA Original Research Article
917
Thermal structure of the shallow upper mantle beneath Italy and neighbouring areas: Correlation with magmatic activity and geodynamic significance
918
Thermal structure, thickness and composition of continental lithosphere
919
Thermal studies of a lithium-ion battery
920
Thermal studies of acetylacetonato aniline acetohydrazone and complexes with divalent ions of Mn, Co, Ni and Cu
921
Thermal studies of Albizia inopinata crude extract in the presence of cyclodextrin and Aerosil® by TG and DSC coupled to the photovisual system
922
Thermal studies of C60 transformed by temperature and pressure treatments Original Research Article
923
Thermal studies of chromium, molybdenum and ruthenium complexes of chloranilic acid
924
Thermal studies of copper(II) fumarate and copper(II) terephthalate
925
Thermal studies of doped polyaniline
926
Thermal studies of fluorinated ester as a novel candidate for electrolyte solvent of lithium metal anode rechargeable cells
927
Thermal Studies of Iron (II) Schiff Base Complexes: New Precursors for Preparation of α-Fe2O3 Nanoparticles via Solid-State Thermal Decomposition
928
Thermal studies of low silica zeolites and their magnesium exchanged forms
929
Thermal studies of new biodiesel antioxidants synthesized from a natural occurring phenolic lipid
930
Thermal studies of Ni(II), Pd(II), Pt(II) and Ru(III) complexes of N,N-dihexyl-N′-benzoylthiourea
931
Thermal studies of plant carbohydrate polymer hydrogels
932
Thermal studies of poly(esters) containing silicon or germanium in the main chain
933
Thermal studies of the electrical conductivity of LiCoYb-ferrites Original Research Article
934
Thermal studies of the state of water in proton conducting fuel cell membranes
935
Thermal studies of transition metal complexes of acetylsalicylhydroxamic acid
936
Thermal studies on absorption/desorption of toluene in copper(II) trans-1,4-cyclohexanedicarboxylate
937
Thermal studies on cobalt(II), nickel(II) and copper(II) ternary complexes of N-(2-acetamido) iminodiacetic acid and imidazoles
938
Thermal studies on electrodeposited black oxide coating on magnesium alloys
939
Thermal studies on fine carbonaceous aerosol collected at a regional background site
940
Thermal studies on fluorite type ZryU1−yO2 solid solutions
941
Thermal studies on polyindole and polycarbazole
942
Thermal studies on the gelatinisation and retrogradation of heat¯moisture treated starch
943
Thermal studies on the solid–liquid phase transition in binary systems of fatty acids
944
Thermal study and structural characterization of self-assembled monolayers generated from diadamantane disulfide on Au(1 1 1)
945
Thermal study of a cryogen-less MgB2 cavity
946
Thermal study of a cryogen-less MgB2 cavity
947
Thermal study of a transport container Original Research Article
948
Thermal study of antiferromagnetic ordering in deuterated (DMe-DCNQI)2Cu
949
Thermal study of chromium–phosphorus-doped tricalcium aluminate
950
Thermal study of copper adsorption on montmorillonites
951
Thermal Study of Gallium Nitride - Metal Contact
952
Thermal study of HNIW (CL-20)
953
Thermal study of low-grade magnesium hydroxide used as fire retardant and in passive fire protection
954
Thermal study of octylcyanobiphenyl liquid crystal confined to controlled-pore glass
955
Thermal study of phenol–formaldehyde resin modified with cashew nut shell liquid
956
Thermal study of reentrant metal-insulator transition in deuterated (DMe-DCQNI)2Cu
957
Thermal study of school buildings in winter conditions
958
Thermal study of the effect of several solvents on polymerization of acrylonitrile and their subsequent pyrolysis
959
Thermal study of the solid-state reactions on Pt-15%Rh/Hg system
960
Thermal study on high power infrared emitter with different thermal interface materials by utilizing dual interface method
961
Thermal study on release of lattice oxygen from carbon-bearing Ni(II) ferrite
962
Thermal study on single electrodes in lithium-ion battery
963
Thermal study on structural changes and phase transition in high-energy electron-irradiated blends of P(VDF–TrFE) copolymers
964
Thermal study on the impurity effect on thermodynamic stability of the glacial phase in triphenyl phosphite–triphenyl phosphate system
965
Thermal sudomotor function in patients with restricted intramedullary spinal lesions: Clinical implications for the localization of the hypothalamo-spinal tract
966
Thermal supplementing soil nutrients through biocomposting of night-soil in the northwestern Indian Himalaya
967
Thermal surveys of the Vulcano Fossa fumarole field 1994–1999: evidence for fumarole migration and sealing
968
Thermal synthesis of Cu@carbon spherical core–shell structures from carbonaceous matrices containing embedded copper particles Original Research Article
969
Thermal synthesis of Hematite nanoparticles: Structural, magnetic and morphological characterizations
970
Thermal systems modelling via singular value decomposition: direct and modular approach
971
THERMAL TEMPERING SIMULATION OF GLASS PLATES: INNER AND EDGE RESIDUAL STRESSES
972
Thermal test of the insulation structure for LH2 tank by using the large experimental apparatus Original Research Article
973
Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material
974
Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content
975
Thermal Testing on Reconfigurable Computers
976
Thermal tests of broadband dielectric mirrors
977
Thermal tests on B4C-overlaid carbon fibre reinforced composites under disruption heat load conditions
978
Thermal therapy with radiofrequency for the treatment of basal cell carcinoma: a pilot study
979
Thermal thiocyanate ligand substitution kinetics of the solar cell dye N719 by acetonitrile, 3-methoxypropionitrile, and 4-tert-butylpyridine
980
Thermal three-dimensional Lattice Boltzmann simulations of suspended solid particles in microchannels
981
Thermal thresholds in clinical practice: A retrospective audit
982
Thermal thresholds in complex regional pain syndrome type I: sensitivity and repeatability of the methods of limits and levels
983
Thermal tides on Pluto
984
Thermal tolerance and potential impacts of climate change on coastal and estuarine organisms
985
Thermal tolerance during early ontogeny in the common whelk Buccinum undatum (Linnaeus 1785): Bioenergetics, nurse egg partitioning and developmental success
986
Thermal tolerance in a south-east African population of the tsetse fly Glossina pallidipes (Diptera, Glossinidae): Implications for forecasting climate change impacts
987
Thermal tolerance of adult greenbug, Schizaphis graminum: Different role of sugars and polyols
988
Thermal tolerance of the invasive oyster Crassostrea gigas: Feasibility of heat treatment as an antifouling option
989
Thermal tolerance, net CO2 exchange and growth of a tropical tree species, Ficus insipida, cultivated at elevated daytime and nighttime temperatures
990
Thermal tolerances of reef corals in the Gulf: A review of the potential for increasing coral survival and adaptation to climate change through assisted translocation
991
Thermal transfer of fructosyl residues to amylopectin and soluble starch during the melt thermolysis of sucrose
992
Thermal transformation and ionic conductivity of ammonium ion-exchanger prepared from Na-4-mica
993
Thermal Transformation of (NH4)[Fe(AsO4)F] Into the New Textural Porous Orthorhombic Fe(AsO4) Phase. Crystal Structures, Thermal Behavior, and Spectroscopic and Magnetic Properties
994
Thermal transformation of alumina hydrolysates and gels synthesized from secbutoxyaluminium(III) modified with short-chain aliphatic acids dissolved in butyl ether
995
Thermal transformation of Ba-exchanged A and X zeolites into monoclinic celsian
996
Thermal transformation of Na-LTA zeolite into low-carnegieite: The influence of residual sodium and aluminium species
997
Thermal transformation of pyrophyllite and alkali dissolution behavior of silicon
998
Thermal transformation of quaternary compounds in NaF–CaF2–AlF3 system
999
Thermal transformation of synthetic euhedral and fibrillar crystals of boehmite into aluminas
1000
Thermal transformation of trans-5-O-caffeoylquinic acid (trans-5-CQA) in alcoholic solutions
