بر اساس عنوان

1
Experimental studies on the pyrolysis of humins from the acid-catalysed dehydration of C6-sugars
2
Experimental Studies on the Quasi-Static Axial Crushing Behavior of Foam-Filled Steel Extrusion Tubes
3
Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam
4
Experimental Studies on the Rheological and Hydraulic Performance of Palm Based Hydraulic Fluid
5
Experimental studies on the ring opening polymerization of p-dioxanone using an Al(OiPr)3-monosaccharide initiator system
6
Experimental studies on the ripped-rock revetment embankment in permafrost regions of the Qinghai–Tibet railroad
7
Experimental studies on the shear behaviour and strength of LiteSteel beams
8
Experimental studies on the stable carbon isotope biogeochemistry of acetate in lake sediments
9
Experimental studies on the submicron particle impactor
10
Experimental studies on the temperature fluctuations in deformed thermoplastics with defects
11
Experimental studies on the three-dimensional effects of opposed-flow flame spread over thin solid materials
12
Experimental studies on the use of a phase change material for cooling mobile phones
13
Experimental studies on the use of mobile cylinders for measurement of flow through rectangular channels
14
Experimental studies on the use of MOV in transformer windings inner protection
15
Experimental Studies on the Use of Nanofluid and Glass Cover Cooling on the Performance of Hemispherical Solar Still: Energy and Exergy Approach
16
Experimental studies on the viscosity of TiO2 and Al2O3 nanoparticles suspended in a mixture of ethylene glycol and water for high temperature applications
17
Experimental studies on the yield behavior of ductile and brittle aluminum foams
18
Experimental studies on thermal conductivity of blends of ethylene glycol-water-based TiO2 nanofluids
19
Experimental studies on three potassium-rich ultramafic rocks from Damodar Valley, East India
20
Experimental studies on time-dependent size distributions of smoke particles of standard test fires
21
Experimental studies on transient features of natural convection in particles suspensions
22
Experimental studies on treatment of distillery effluent by liquid membrane extraction
23
Experimental studies on two-phase flow patterns aboard the Mir space station
24
Experimental studies on vacancy induced ferromagnetism in undoped TiO2
25
Experimental studies on wind influence on hydrogen release from low pressure pipelines
26
Experimental studies on yield behavior of steel under rapid heating
27
Experimental studies simulating potential phosphorus release from municipal sewage sludge deposits
28
Experimental studies the burning process of gelled unsymmetrical dimethylhydrazine droplets under oxidant convective conditions
29
Experimental studies using a low-energy RI beam separator at CNS Original Research Article
30
Experimental Studies With a Generalized Neuron-Based Power System Stabilizer
31
Experimental studies with power system stabilizers on a physical model of a multimachine power system
32
Experimental studies with simple neuro-controller based excitation controller
33
Experimental Studies, Response Surface Methodology and Molecular Modeling for Optimization and Mechanism Analysis of Methylene Blue Dye Removal by Different Clays
34
Experimental Study & Modeling of Surface Roughness in Turning of Hardened AISI 4340 Steel Using Coated Carbide Inserted
35
Experimental Study (FT IR and FT Raman), Computed Vibrational Frequency Analysis and Computed IR Intensity and Raman Activity Analysis on 2, 6-Lutidine: HF and DFT Calculations
36
Experimental Study 0f Drag Reduction Phenomena in the Horizontal Tube with Nano SiO2 by Neural Network - Genetic Algorithm
37
Experimental study about erosion in salt gradient solar pond
38
Experimental study about hydrogen isotopes storage on titanium bed
39
Experimental study about the agglomeration behavior in slurry prepared by adding excess polyelectrolyte dispersant
40
Experimental study about the effects of disc chipper settings on the distribution of wood chip size
41
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
42
Experimental study and ab initio molecular orbital calculation on the photolysis of n-butyrophenone included within the alkali metal cation-exchanged ZSM-5 zeolite
43
Experimental Study and Adsorption Modeling of COD Reduction by Activated Carbon for Wastewater Treatment of Oil Refinery
44
Experimental study and analysis of breakdown characteristics of long air gaps with short tail lightning impulse
45
Experimental study and analysis of mechanical properties of frozen rabbit aorta by fracture mechanics approach
46
Experimental study and analysis of RC beams strengthened with CFRP laminates under sustaining load
47
Experimental study and analysis of the purge gas pressure drop across the pebble beds for the fusion HCPB blanket
48
Experimental study and analysis on driving wheels’ performance for planetary exploration rovers moving in deformable soil
49
Experimental study and analytical formulation of mechanical behavior of concrete
50
Experimental study and analytical model for pore structure of hydrated cement paste
51
Experimental study and analytical model of the cavitation ring region with small diameter ultrasonic horn
52
Experimental study and analytical model of the cavitation ring region with small diameter ultrasonic horn
53
Experimental study and analytical reconstruction of precessing vortex in a tangential swirler
54
Experimental study and application of mechanical properties for the interface between cobblestone aggregate and mortar in concrete
55
Experimental study and application of tannin foam for profile modification in cyclic steam stimulated well
56
Experimental study and application on profile control using high-temperature foam
57
Experimental study and asymptotic analysis of horizontally forced forward smoldering combustion
58
Experimental Study and CFD Modeling of the Ohmic Heating Process in a Static Two-Phase Biosolid – Liquid System
59
Experimental study and CFD simulation of wall effects on heat transfer of an extrudate multi-lobe particle
60
Experimental study and characterization of metal hydride containers
61
Experimental study and chemical analysis of n-heptane homogeneous charge compression ignition combustion with port injection of reaction inhibitors
62
Experimental study and code predictions of fibre reinforced polymer reinforced concrete (FRP RC) tensile members
63
Experimental Study and Comparative Analysis of Transients of Induction Motor with Soft Starter Startup
64
Experimental Study and Comparison of a Few Lean (gasoline-natural gas) Dual Fuels Based on Safe Optimum Spark Advance
65
EXPERIMENTAL STUDY AND COMPUTATIONAL MODELLING OF GAS FIRED PULSE COMBUSTION
66
Experimental study and computer-aided prediction of percentage of water absorption of geopolymers produced by waste fly ash and rice husk bark ash
67
Experimental study and configurational-coordinate model for photo-induced effects in amorphous As2Se3 films
68
Experimental study and constitutive modelling of the passive mechanical properties of the ovine infrarenal vena cava tissue
69
Experimental study and constitutive modelling of the passive mechanical properties of the porcine carotid artery and its relation to histological analysis: Implications in animal cardiovascular device trials
70
Experimental Study and Correlation for Mass Transfer Coefficient in the Pilot Plant Multistage Column with the Presence of Molybdenum
71
Experimental study and detailed kinetic modeling of the effect of exhaust gas on fuel combustion: mutual sensitization of the oxidation of nitric oxide and methane over extended temperature and pressure ranges
72
Experimental Study and Economical Analysis of a Cascade Solar still Integrated with an Evacuated Tube and a Conventional Flat Plate Solar Collectors
73
Experimental study and evaluation of latent heat storage in phase change materials wallboards
74
Experimental study and exergetic analysis of a CPC-type solar water heater system using higher-temperature circulation in winter
75
Experimental study and FEM analysis of redundant strains in flow forming of tubes
76
Experimental study and finite element analysis of simple X- and T-branch tube hydroforming processes
77
Experimental study and finite element analysis of simple X- and T-branch tube hydroforming processes
78
Experimental study and finite element analysis of simple X- and T-branch tube hydroforming processes
79
Experimental study and finite element analysis of the elastic instability of composite lattice structures for aeronautic applications
80
Experimental study and finite element modelling of Japanese “Nuki” joints — Part one: Initial stress states subjected to different wedge configurations
81
Experimental study and finite element modelling of Japanese “Nuki” joints — Part one: Initial stress states subjected to different wedge configurations
82
Experimental study and finite element modelling of Japanese “Nuki” joints — Part two: Racking resistance subjected to different wedge configurations
83
Experimental study and finite element modelling of Japanese “Nuki” joints — Part two: Racking resistance subjected to different wedge configurations
84
Experimental Study and Finite Element Simulation of Residual Stress in Welded Sections of Steel P91 Pipes with Multi-pass Welding
85
Experimental study and FLUKA simulations of a prototype micromegas chamber in a mixed neutron and photon radiation field
86
Experimental study and FLUKA simulations of a prototype micromegas chamber in a mixed neutron and photon radiation field
87
Experimental Study and Identification of a Dynamic Deformation Model of Dry Clay at Strain Rates up to 2500 s^-1
88
Experimental Study and Kinetic Calculation on Migration of γ/α Interface Boundary During High Temperature Aging for 2205 Duplex Stainless Steel Original Research Article
89
Experimental study and kinetic modeling of kerosene thermal cracking
90
Experimental study and kinetic modeling of kerosene thermal cracking
91
Experimental study and large eddy simulation for the turbulent flow around four cylinders in an in-line square configuration
92
Experimental study and large eddy simulation of turbulent flow around tube bundles composed of wavy and circular cylinders
93
Experimental study and mathematical model for soya bean drying in thin layer
94
Experimental study and mathematical model of nanoparticle transport in porous media
95
Experimental Study and Mathematical Modeling of the Osmotic Drying Process
96
Experimental study and mathematical modeling of thin layer drying of rhubarb (Rheum ribes L.)
97
Experimental Study and Modeling by the Complete Factorial Plan of the Elimination of Textile Dye by Electrocoagulation Using Aluminum from Recycled Cans
98
Experimental study and modeling of a high-temperature solar chemical reactor for hydrogen production from methane cracking
99
Experimental study and modeling of an Organic Rankine Cycle using scroll expander
100
Experimental study and modeling of basic dye sorption by diatomaceous clay
101
Experimental study and modeling of cooling ceiling systems using steady-state analysis
102
Experimental study and modeling of dodecane ignition in a diesel engine
103
Experimental study and modeling of effective NaCl diffusion coefficients values during Emmental cheese brining Original Research Article
104
Experimental study and modeling of fluidized bed coating and agglomeration
105
Experimental Study and Modeling of Friction Stir Welding Process of Aluminum 1100 Alloys, using Artificial Neural Network with Taguchi Method
106
Experimental Study and Modeling of Gravity Drainage during WAG Process in Fractured Carbonate Rocks
107
Experimental study and modeling of impedance of the her on porous Ni electrodes
108
Experimental study and modeling of laser plasma ion implantation for WSex/57Fe interface modification
109
Experimental Study and Modeling of Mass Transfer Flux of CO2 Absorption with Amine Solution in Bubble Column
110
Experimental study and modeling of nisin diffusion in agarose gels Original Research Article
111
EXPERIMENTAL STUDY AND MODELING OF REINFORCED CONCRETE BEAMS STRENGTHENED BY POST-TENSIONED EXTERNAL REINFORCING BARS
112
Experimental study and modeling of residence time distribution in impinging stream reactor with GDB model
113
Experimental study and modeling of static electrification in power transformers
114
Experimental Study and Modeling of Supercritical Extraction of Nicotine from Tabacco Leaves
115
Experimental study and modeling of the effect of mixed size abrasive grits on surface topology and removal rate in wafer lapping
116
Experimental study and modeling of the influence of mixed electrolytes on adsorption of macromolecules on a hydrophobic resin
117
Experimental study and modeling of the salt effect on phase equilibria for binary hydroxylic liquid systems Original Research Article
118
Experimental study and modeling of the sorption of uranium(VI) onto olivine-rock
119
Experimental study and modeling of the transfer of zinc in a low reactive sand column in the presence of acetate
120
Experimental study and modeling on liquid dispersion in external-loop airlift slurry reactors
121
Experimental study and modelization of reverse osmosis with salt solutes in an unstirred batch cell
122
Experimental study and modelling of adsorption and desorption isotherms of prickly pear peel (Opuntia ficus indica) Original Research Article
123
Experimental study and modelling of Cr (VI) removal from wastewater using Lemna minor
124
Experimental study and modelling of gelatin production from bone powder: elaboration of an overall kinetic scheme for the acid process
125
Experimental study and modelling of granite-distilled water interactions at 180°C and 14 bars
126
Experimental study and modelling of heat transfer during condensation of pure fluid and binary mixture on a bundle of horizontal finned tubes
127
Experimental study and modelling of isotherms of sorption of humid natural phosphate
128
Experimental study and modelling of lead solubility as a function of pH in mixtures of ground waters and cement waters
129
Experimental study and modelling of mass transfer during simultaneous absorption of SO2 and NO2 with chemical reaction
130
Experimental study and modelling of methane adsorption and diffusion in shale
131
Experimental study and modelling of saturation molality of NaCl in quaternary aqueous electrolyte solutions at various temperatures Original Research Article
132
Experimental study and modelling of short fatigue crack growth in aluminium alloy Al7010-T7451 under random loading
133
Experimental study and modelling of the crystallization of a water droplet
134
Experimental study and modelling of the ice crystal morphology of model standard ice cream. Part I: Direct characterization method and experimental data Original Research Article
135
Experimental study and modelling of the ice crystal morphology of model standard ice cream. Part II: Heat transfer data and texture modelling Original Research Article
136
Experimental study and modelling of the residence time distribution in a scraped surface heat exchanger during sorbet freezing Original Research Article
137
Experimental study and modelling of thermal runaway: Application to dichromate catalysed hydrogen peroxide decomposition
138
Experimental study and modelling of volumetric properties, viscosities and refractive indices of binary liquid mixtures benzene + PEG 200/PEG 400 and toluene + PEG 200/PEG 400
139
Experimental study and modelling using the ERAS-Model of the excess molar volume of acetonitrile–alkanol mixtures at different temperatures and atmospheric pressure
140
Experimental study and Monte Carlo modeling of the Cherenkov effect
141
Experimental study and Monte Carlo modeling of the Cherenkov effect
142
Experimental study and neural network modeling of sugarcane bagasse pretreatment with H2SO4 and O3 for cellulosic material conversion to sugar
143
Experimental study and nuclear model calculations on the 192Os(p,n)192Ir reaction: Comparison of reactor and cyclotron production of the therapeutic radionuclide 192Ir
144
Experimental study and numerical analysis of a composite bridge structure
145
Experimental study and numerical analysis of thermocompressors with annular regenerators
146
Experimental study and numerical analysis on electromagnetic force of direct action solenoid valve Original Research Article
147
Experimental study and numerical investigation of particle penetration and deposition in 90° bent ventilation ducts
148
Experimental Study and Numerical Modeling of CO2 Bio-Fixation in a Continues Photobioreactor
149
Experimental study and numerical modeling of vibrational characteristics of a 500W PEM fuel cell stack
150
Experimental study and numerical modelling of a dielectric barrier discharge in hybrid air–dielectric insulation
151
Experimental study and numerical modelling of the irradiation damage recovery in zirconium alloys
152
Experimental study and numerical modelling of the nickel oxide coating on the Ni(111) surface
153
Experimental study and numerical modelling of VHB 4910 polymer
154
Experimental study and numerical prediction of tensile strength properties and failure modes of hollow spheres filled syntactic foams
155
Experimental study and numerical simulation for a storehouse fire accident
156
Experimental study and numerical simulation of a solar still using an external condenser
157
Experimental study and numerical simulation of active vibration control of a highly flexible beam using piezoelectric intelligent material
158
Experimental Study and Numerical Simulation of Cutting and Tearing of Silicone Rubber using Extended Finite Element Method
159
Experimental study and numerical simulation of evacuation from a dormitory
160
Experimental study and numerical simulation of pipe-on-pipe impact
161
Experimental study and numerical simulation of preform or sheet exposed to infrared radiative heating
162
Experimental Study and Numerical Simulation of Sediment Transport in a Shallow Reservoir
163
Experimental Study and Numerical Simulation of Sediment Transport in a Shallow Reservoir
164
Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion
165
Experimental study and numerical simulation of the large-scale testing of polymeric composite journal bearings: Three-dimensional and dynamic modeling
166
Experimental study and numerical simulation of the pressure distribution on the die surface during upsetting
167
Experimental study and numerical simulation of three dimensional two-phase impinging jet flow using anisotropic turbulence model
168
Experimental study and numerical simulation on the formation of microstructure in cementitious materials at early age
169
Experimental study and optimization of the agglomeration of acerola powder in a conical fluid bed
170
Experimental study and particle population modeling of coating in a jet-fluidized bed
171
Experimental study and PC-SAFT simulations of sorption equilibria in polystyrene
172
Experimental study and performance analysis of a thermoelectric cooling and heating system driven by a photovoltaic/thermal system in summer and winter operation modes
173
Experimental study and phase equilibrium modeling of systems containing acid gas and glycol
174
Experimental study and predictions of an induced draft ceramic tile packing cooling tower
175
Experimental study and predictions of pressure losses of fluids modeled as Herschel–Bulkley in concentric and eccentric annuli in laminar, transitional and turbulent flows
176
Experimental study and process parameters analysis on the vacuum cooling of iceberg lettuce
177
Experimental study and process simulation of n-butyl acetate produced by transesterification in a catalytic distillation column
178
Experimental study and simulation of a hydraulic engine mount with fully coupled fluid–structure interaction finite element analysis model
179
Experimental study and simulation of a vertical section mullite-ternary eutectic (985 °C) in the SiO2–Al2O3–K2O system
180
Experimental Study and Simulation of Different EOR Techniques in a Non-Fractured Carbonate Core from an Iranian Offshore Oil Reservoir
181
Experimental study and simulation of plastic deformation of zirconia-based ceramics in a pulsed electric current apparatus Original Research Article
182
Experimental study and simulation of syngas generation from methane in the Pulsed Compression Reactor
183
Experimental study and simulation of vibrated fluidized bed drying
184
Experimental study and simulation on the formation of two-dimensional particle arrangements
185
Experimental study and simulations on two different avalanche modes in trench power MOSFETs
186
EXPERIMENTAL STUDY AND SPICE SIMULATION OF CMOS INVERTERS LATCH-UP EFFECTS DUE TO HIGH POWER MICROWAVE INTERFERENCE
187
Experimental Study and steady state stability analysis of CLL-T Series Parallel Resonant Converter with Fuzzy controller using State Space Analysis
188
Experimental study and steady-state simulation of biogeochemical processes in laboratory columns with aquifer material
189
Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag
190
Experimental study and stress analysis of rock bolt anchorage performance
191
Experimental study and techno-economical evaluation of Khangiran sour natural gas condensate desulfurization process
192
Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle
193
Experimental study and theoretical analysis on die soldering in aluminum die casting
194
Experimental study and theoretical analysis on slender concrete-filled CFRP–PVC tubular columns
195
Experimental study and thermal analysis of a Gamma type Stirling engine for multi-objective optimization
196
Experimental study and thermodynamic assessment of ternary Mg–Zn–Ce phase relations focused on Mg-rich alloys
197
Experimental study and thermodynamic assessment of the Ag–Ti system
198
Experimental study and thermodynamic assessment of the Ag–Ti system
199
Experimental study and thermodynamic assessment of the Al–Fe rich side of the Al–Zn–Fe system at 300 and 550 ° C
200
Experimental study and thermodynamic assessment of the Cu–Fe–Ti system
201
Experimental study and thermodynamic assessment of the Cu–Ni–Ti system
202
Experimental study and thermodynamic assessment of the erbium–hydrogen binary system
203
Experimental study and thermodynamic assessment of the Zn-Fe-Ni system
204
Experimental study and thermodynamic assessment of the Zn-Fe-Ni system
205
Experimental study and thermodynamic calculation of Al–Mg–Sr phase equilibria
206
Experimental study and thermodynamic calculation of Au–Bi–Sb system phase equilibria Original Research Article
207
Experimental study and thermodynamic calculation of Bi–Cu–Sb system phase equilibria
208
Experimental study and thermodynamic calculations of phase relations in the Fe–C system at high pressure
209
Experimental study and thermodynamic modelling of the ternary Al–Ta–Ti system
210
Experimental study and thermodynamic modelling of the ZrO2–LaO1.5 system
211
Experimental study and thermodynamic modelling of the ZrO2–LaO1.5 system
212
Experimental study and thermodynamic optimization of the CaO–NiO, MgO–NiO and NiO–SiO2 systems
213
Experimental study and thermodynamic re-assessment of the binary Al–Ta system
214
Experimental study and thermodynamic re-assessment of the binary Fe–Ta system
215
Experimental study and thermodynamic re-assessment of the Ni–Zr system
216
Experimental study and thermodynamic re-assessment of the Ni–Zr system
217
Experimental study and thermodynamic remodeling of the Bi–Cu–Ni system
218
Experimental study and thermodynamical modelling of the solubilities of SO2, H2S and CO2 in N-dodecylimidazole and 1,1′-[oxybis(2,1-ethanediyloxy-2,1-ethanediyl)]bis(imidazole): An evaluation of their potential application in the separation of acidic gase
219
Experimental Study and Three-Dimensional Numerical Flow Simulation in a Centrifugal Pump when Handling Viscous Fluids
220
Experimental study and three-dimensional simulation of premixed hydrogen/air flame propagation in a closed duct
221
Experimental Study and wake Characteristics Comparison of a Car Model in Steady and Unsteady Flow
222
Experimental Study based Graphene Oxide Nanoplatelets Nanofluid Used in Domestic Application on the Performance of DASCs with Indirect Circulation Systems
223
Experimental study by pyrometry of Portevin–Le Châtelier plastic instabilities—Type A to type B transition
224
Experimental study conducted on a liquid-filled combined conical tank model
225
Experimental study for an intraoperative probe for 18F imaging with a silicon pixel detector
226
Experimental study for an intraoperative probe for 18F imaging with a silicon pixel detector
227
Experimental study for control of sound transmission through double glazed window using optimally tuned Helmholtz resonators
228
Experimental study for dimethyl ether production from biomass gasification and simulation on dimethyl ether production
229
Experimental study for growth potential of unicellular alga Chlorella pyrenoidosa on dairy waste water: An integrated approach for treatment and biofuel production
230
Experimental study for increasing productivity of Boletus edulis s.l. in Italy
231
Experimental Study for Investigating the Mechanism of Heat Transfer Near the Critical Heat Flux in Nucleate Pool Boiling
232
Experimental study for liquid phase selective hydrogenation of furfuryl alcohol to tetrahydrofurfuryl alcohol on supported Ni catalysts
233
Experimental study for measuring the decay branching ratio for nuclear excitation by electron transition in 189Os
234
Experimental study for noble gas release and exchange under high-speed frictional melting
235
Experimental Study for Protection of Piers Against Local Scour Using Slots
236
Experimental Study for Protection of Piers Against Local Scour Using Slots
237
Experimental study for sensorless broken bar detection in induction motors
238
Experimental Study for Strength Capacity of Cold-Formed Steel Joists Connections with Consideration of Various Bolts Arrangements
239
Experimental study for the comparison of classifier combination methods
240
Experimental study for the compressible behavior of warm and ice-rich frozen soil under the embankment of Qinghai–Tibet Railroad
241
Experimental study for the evaluation of creep in concrete through thermal measurements
242
Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure
243
Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its microstructure
244
Experimental study for thermal conductivity structure of lunar surface regolith: Effect of compressional stress
245
Experimental study of 2,4,6-Trichlorophenol and pentachlorophenol solubilities in aqueous solutions: derivation of a speciation-based Chlorophenol solubility model
246
Experimental study of 210Po release from 17Li83Pb eutectic
247
Experimental Study of 3D Pump-Intake Flows with and without Cross Flow
248
Experimental Study of 3D Pump-Intake Flows with and without Cross Flow
249
Experimental study of a 3D dry granular medium submitted to horizontal shaking
250
Experimental study of a basin type solar still with internal and external reflectors in winter Original Research Article
251
Experimental study of a burner with high temperature heat recovery system for TPV applications
252
Experimental study of a circular concrete column reinforced with a composite tube
253
Experimental study of a closed loop vertical ground source heat pump system
254
Experimental study of a cocurrent upfiow packed bed bubble column reactor: pressure drop, holdup and interfacial area
255
Experimental study of a commercial circulated fluidized bed coal gasifier
256
Experimental study of a compact PCM solar collector
257
Experimental study of a composite wood–concrete beam with the INSA–Hilti new flexible shear connector
258
Experimental study of a counter flow regenerative evaporative cooler with finned channels
259
Experimental study of a crystal positron source
260
Experimental study of a domestic thermoelectric cogeneration system
261
Experimental study of a double exposure solar cooker with finned cooking vessel
262
Experimental Study of a Double Glazed Solar Air Collector
263
Experimental study of a dynamic filtration system with overlapping ceramic membranes and non-permeating disks rotating at independent speeds
264
Experimental study of a finned tubes impact gas-solid separator for CFB boilers
265
Experimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr^4+:YAG Saturable Absorber
266
Experimental study of a fuel cell power train for road transport application
267
Experimental Study of a Gas Engine-driven Heat Pump System for Space Heating and Cooling
268
Experimental study of a ground-coupled heat pump combined with thermal solar collectors
269
Experimental study of a hand-drawn cart for measuring the bridge frequencies
270
Experimental study of a heat pump system with flash-tank coupled with scroll compressor
271
Experimental study of a high power and high efficiency CW diode-side-pumped Nd:YAG laser
272
Experimental Study of a High Speed Micro Waterwheel
273
Experimental study of a high-current FEM with a broadband microwave system
274
Experimental study of a high-current FEM with a broadband microwave system
275
Experimental study of a high-power CW side-pumped Nd:YAG laser
276
Experimental Study of a Horizontal Jet in a Wavy Environment
277
Experimental study of a hybrid photocatalytic hydrogen production reactor for Cu–Cl cycle
278
Experimental study of a Kiglapait marginal rock and implications for trace element partitioning in layered intrusions
279
Experimental study of a liquid Xenon PET prototype module
280
Experimental study of a liquid Xenon PET prototype module
281
Experimental study of a low pressure stoichiometric premixed methane, methane/ethane, methane/ethane/propane and synthetic natural gas flames
282
Experimental study of a low temperature heat driven re-heat two-stage adsorption chiller
283
Experimental study of a low-alkali tholeiite at 1–5 kbar: optimal condition for the crystallization of high-An plagioclase in hydrous arc tholeiite
284
Experimental study of a mechanically ventilated double-skin façade with venetian sun-shading device: A full-scale investigation in controlled environment
285
Experimental study of a metal hydride vessel based on a finned spiral heat exchanger
286
Experimental study of a multiple-effect humidification solar desalination technique Original Research Article
287
Experimental Study of a Nanoparticle Virtual Impactor
288
Experimental study of a new corona-based unipolar aerosol charger
289
Experimental study of a new furan-2-ylmethylene-hydrazide as a corrosion inhibitor in acidic media
290
Experimental study of a new kind of superconducting inductor
291
Experimental study of a non-isothermal wall jet issued by a displacement ventilation system
292
Experimental study of a novel CaCl2/expanded graphite-NH3 adsorption refrigerator
293
Experimental study of a novel capacity control algorithm for a multi-evaporator air conditioning system
294
Experimental study of a novel neuro-fuzzy system for on-line handwritten UNIPEN digit recognition
295
Experimental study of a novel portable solar still by utilizing the heatpipe and thermoelectric module Original Research Article
296
Experimental Study of a Pack of Supercapacitors Used in Electric Vehicles
297
Experimental study of a photovoltaic solar-assisted heat-pump/heat-pipe system
298
Experimental study of a pickup truck near wake
299
Experimental study of a plat-flame micro combustor burning DME for thermoelectric power generation
300
Experimental study of a potential weakening effect in spheres with thin hard coatings
301
Experimental study of a proximity focusing Cherenkov counter prototype for the AMS experiment
302
Experimental study of a proximity focusing Cherenkov counter prototype for the AMS experiment
303
Experimental study of a pseudo-preconsolidation pressure in frozen soils
304
Experimental study of a roof solar collector towards the natural ventilation of new houses
305
Experimental study of a semiconductor laser diode having a Mach–Zehnder interferometer in the cavity
306
Experimental study of a series-connected two-evaporator refrigerating system with propane (R-290) as the refrigerant
307
Experimental study of a simple reinforced concrete beam temporarily strengthened by SMA wires followed by permanent strengthening with CFRP plates
308
Experimental study of a simple reinforced concrete beam temporarily strengthened by SMA wires followed by permanent strengthening with CFRP plates
309
Experimental study of a single tube high RF power amplifier for ICRF heating system
310
Experimental study of a single-cylinder engine fueled with natural gas–hydrogen mixtures
311
Experimental Study of a Soft-Switched Isolated Bidirectional AC–DC Converter Without Auxiliary Circuit
312
Experimental study of a solar desalination system based on humidification–dehumidification process Original Research Article
313
Experimental study of a solar still with sponge cubes in basin
314
Experimental study of a solid adsorption cooling system using flat-tube heat exchangers as adsorption bed
315
Experimental study of a solidified activated carbon-methanol adsorption ice maker
316
Experimental Study of a Square Foundation with Connected and NonConnected Piled Raft Foundation Under Eccentrically Loaded
317
Experimental study of a static system based on a magneto-thermal coupling in ferrofluids
318
Experimental Study of a Tanker Ship Squat in Shallow Water
319
Experimental Study of a Thermal Plume Evolving in a Confined Environment: Application to Fires Problems
320
Experimental Study of a Thermal Plume Evolving in a Confined Environment: Application to Fires Problems
321
Experimental study of a thermochemical compressor for an absorption/compression hybrid cycle
322
Experimental study of a thermo-chemical refrigerator using the barium chloride–ammonia reaction
323
Experimental study of a thermochromic material based optical fiber sensor for monitoring the temperature of the water in several applications
324
Experimental study of a thermoelectrically-driven liquid chiller in terms of COP and cooling down period
325
Experimental study of a three-effect plate evaporator: seawater tests in La Spezia Original Research Article
326
Experimental study of a transformer with superconducting elements for fault current limitation and energy redistribution Original Research Article
327
Experimental study of a tubeless convex type solar collector
328
Experimental study of a turbulent boundary layer flow over a windbreak of semi-circular section
329
Experimental Study of a Two-Phase Thermosyphon Loop in Conditions of High Fluidic and Thermal Loads
330
Experimental study of a two-phase two-component critical flow in a converging-diverging nozzle
331
Experimental study of a two-stage adsorption freezing machine driven by low temperature heat source
332
Experimental study of a woven fiberglass composite delamination under impact shock
333
Experimental study of a zero water consumption wet FGD system
334
Experimental study of abrasive process
335
Experimental study of accelerated leaching on hollow cylinders of mortar
336
Experimental study of acetone removal by packed-bed dielectric barrier discharge reactor
337
Experimental study of acidity-consuming processes in mining waste rock: some influences of mineralogy and particle size
338
Experimental study of acoustic agglomeration of coal-fired fly ash particles at low frequencies
339
Experimental Study of Active Vibration Control of Planar 3-RRR Flexible Parallel Robots Mechanism
340
Experimental study of adsorption chiller driven by variable heat source
341
Experimental study of advanced cogeneration system with ammonia–water mixture cycles at bottoming
342
Experimental study of aerodynamic damping in arrays of vibrating cantilevers
343
Experimental study of aerogel Cherenkov detectors for particle identification
344
Experimental study of aerogel Cherenkov detectors for particle identification
345
Experimental study of aerosol reentrainment from flashing pool during controlled filtered venting of the containment after a severe core melt accident
346
Experimental study of air entrainment mode with natural ventilation using shafts in road tunnel fires
347
Experimental study of air flow by natural convection in a closed cavity: Application in a domestic refrigerator Original Research Article
348
Experimental study of air gap and direct contact membrane distillation configurations: application to geothermal and seawater desalination Original Research Article
349
Experimental study of air injection effect on a surface to prevent ice formation
350
Experimental study of air leakage from cracks in reinforced concrete walls Original Research Article
351
Experimental study of air natural convection on metallic foam-sintered plate
352
Experimental study of air squeeze effect on high-frequency friction contact
353
Experimental Study of Air-Cooled Parallel Plate Fin Heat Sinks with and without Circular Pin Fins between the Plate Fins
354
Experimental study of airflow and particle characteristics of a 300-mm POUP/LPU minienvironment system
355
Experimental Study of Airfoil Aerodynamic Behavior under Oscillating Motion in Ground Effect
356
Experimental study of air–water countercurrent annular flow under post-flooding conditions
357
Experimental study of air–water flow in downward sloping pipes
358
Experimental study of air–water two-phase flow in an 8 × 8 rod bundle under pool condition for one-dimensional drift-flux analysis
359
Experimental study of aluminum particle flame evolution in normal and micro-gravity
360
Experimental study of aluminum–fluoride complexation in near-neutral and alkaline solutions to 300 °C
361
Experimental study of aluminum-induced crystallization of amorphous silicon thin films
362
Experimental study of ammonia removal from water by membrane distillation (MD): The comparison of three configurations
363
Experimental study of ammonia removal from water by modified direct contact membrane distillation Original Research Article
364
Experimental study of amorphous silicate formation
365
Experimental study of amplitude and phase detection limits in electron holography
366
Experimental study of amplitude and phase detection limits in electron holography
367
Experimental study of amplitude asymmetry effects in perpendicular recording
368
Experimental Study of an Acoustically Excited Plane Jet at Low Reynolds Numbers
369
Experimental study of an air conditioning system to control a greenhouse microclimate
370
Experimental study of an air-source heat pump for simultaneous heating and cooling – Part 1: Basic concepts and performance verification
371
Experimental study of an air-source heat pump for simultaneous heating and cooling – Part 2: Dynamic behaviour and two-phase thermosiphon defrosting technique
372
Experimental study of an Al2O3/WC–Co nanocomposite based on a failure analysis of hammer bit
373
Experimental Study of an All-Steel Two-Segment Core Buckling Restrained Brace
374
Experimental study of an ammonia-water absorption chiller
375
Experimental study of an ammonia–water bubble absorber using a plate heat exchanger for absorption refrigeration machines
376
Experimental study of an auto-controlled automobile air conditioning system with an externally-controlled variable displacement compressor
377
Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions
378
Experimental study of an energy efficient hybrid system for surface drying
379
Experimental study of an impinging jet with different swirl rates
380
Experimental study of an improved air source heat pump
381
Experimental study of an innovative solar water desalination system utilizing a passive vacuum technique
382
Experimental study of an integrated basin solar still with a sandy heat reservoir Original Research Article
383
EXPERIMENTAL STUDY OF ANTIMONY INDUCED RENAL TOXICITY IN RABBITS
384
Experimental Study of Application of Nano-Filtration Membrane Bioreactor (NF-MBR) for Hospital Wastewater Treatment in Iran
385
Experimental study of applying colloidal nano Silica in improving sand-silt mixtures
386
Experimental Study of Applying Natural Zeolite as A Partial Alternative for Cement in SelfCompacting Concrete (SCC)
387
Experimental study of ash formation during pulverized coal combustion in O2/CO2 mixtures
388
Experimental study of asphaltene precipitation prediction during gas injection to oil reservoirs by interfacial tension measurement
389
Experimental study of asphaltic concrete dynamic properties as an impervious core in embankment dams
390
Experimental Study of Attrition in the Spouted Bed and Spout-Fluid Bed with a Draft Tube
391
Experimental study of back-draft in a compartment with openings of different geometries
392
Experimental Study of Baffle Angle Effect On Heat Transfer Effectiveness Of The Shell an‎d Tube Heat Exchanger Using Helical Baffle
393
Experimental study of basin-type, multiple-effect, diffusion-coupled solar still Original Research Article
394
Experimental study of beam hardening artifacts in photon counting breast computed tomography
395
Experimental study of beam hardening artifacts in photon counting breast computed tomography
396
Experimental study of beam–slab substructures subjected to a penultimate-internal column loss
397
Experimental Study of Bearing Capacity of Granular Soils, Reinforced with Innovative Grid-Anchor System
398
Experimental Study of Bed Load Transport through Emergent Vegetation
399
Experimental study of Bed Pattern around the Cylindrical Pile under Broken Waves
400
Experimental Study of Behaviour of Reactive Powder Concrete Strengthening by NSM-CFRP Corbels
401
Experimental study of bifurcation and chaos in the buck-boost converter
402
Experimental study of bioaccumulation and effects of the herbicide isoproturon on freshwater rooted macrophytes (Elodea densa and Ludwigia natans)
403
Experimental study of biogas combustion in an HCCI engine for power generation with high indicated efficiency and ultra-low NOx emissions
404
Experimental study of biological mechanism in treating of fracture by chinese herbal medicine
405
Experimental study of biporous wicks for high heat flux applications
406
Experimental study of bluff-body stabilized LPG–H2 jet diffusion flame with preheated reactant
407
Experimental study of body charging in combustion products with soot particles
408
Experimental study of boiling incipience in a closed loop vertical annular thermosiphon
409
Experimental study of bolted connections using light gauge channel sections and packing plates at the joints
410
Experimental study of bond of NSM-FRP reinforcement
411
Experimental Study of Bowed-twisted Stators in an Axial Transonic Fan Stage
412
Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model
413
Experimental Study of Brightness Surface Temperature Angular Variations of Maritime Pine (Pinus pinaster) Stands
414
Experimental study of bubble formation at metal porous spargers: Effect of liquid properties and sparger characteristics on the initial bubble size distribution
415
Experimental study of bubble growth in Stromboli basalt melts at 1 atm
416
Experimental study of bubble injection in a turbulent boundary layer
417
Experimental study of bubble size distribution in a liquid column exposed to a rotating magnetic field
418
Experimental Study of Buckling of Reinforced Conical Composite Shell Under Hydrostatic Loading
419
Experimental study of buoyancy-driven flow in open-cell aluminium foam heat sinks
420
Experimental study of burning rate in hydrocarbon pool fires
421
Experimental study of burr formation and tool chipping in the face milling of stainless steel
422
Experimental study of cadmium interaction with periphytic biofilms
423
Experimental study of cake formation on heat treated and membrane coated needle felts in a pilot scale pulse jet bag filter using optical in-situ cake height measurement
424
Experimental Study of Calcination-Carbonation Process for the Production of Precipitated Calcium Carbonate
425
Experimental study of cancellous bone under large strains and a constitutive probabilistic model
426
Experimental study of cancellous bone under large strains and a constitutive probabilistic model
427
Experimental study of capillary pumped loop for integrated power in gravity field
428
Experimental study of capillary-assisted evaporators
429
Experimental study of capillary-assisted water evaporators for vapour-absorption systems
430
Experimental Study of Carbon Dioxide Absorption in Diethyl Ethanolamine (DEEA) in the Presence of Titanium Dioxide (TiO2)
431
Experimental study of carbon fiber reinforced plastic with embedded optical fibers
432
Experimental study of carbon materials behavior under high temperature and VUV radiation: Application to Solar Probe+ heat shield
433
Experimental study of carbon monoxide for woods under spontaneous ignition condition
434
Experimental study of catalytic CO oxidation over CuO/Al2O3 deposited on metal sheets
435
Experimental Study of Cavitation and Hydraulic Flip Effects on Liquid Jet Characteristics into Crossflows
436
Experimental Study of Cavitation and Hydraulic Flip Effects on Liquid Jet Characteristics into Crossflows
437
Experimental study of cavitation damage on hydrogen-terminated and oxygen-terminated diamond film surfaces
438
Experimental study of cell pattern formation induced by internal heat sources in a horizontal fluid layer
439
Experimental study of cellular instability and extinction of non-premixed opposed-flow tubular flames
440
Experimental study of cellular shedding vortices behind a tapered circular cylinder
441
Experimental study of cement grout: Rheological behavior and sedimentation
442
Experimental Study of Cerium Oxide Nanoparticles (CeNP) Against Malathion Induced Lung Oxidative Toxic Stress in Rats
443
Experimental study of CFRP components subjected to dynamic crash loads
444
Experimental study of CFRP fluid-filled tubes subjected to high-velocity impact
445
Experimental study of CFRP-prestressed high-strength concrete bridge beams
446
Experimental study of chaos synchronization in the Belousov–Zhabotinsky chemical system
447
Experimental study of chaotic advection regime in a twisted duct flow
448
Experimental study of char thermal deactivation
449
Experimental study of characteristic curves of centrifugal pumps working as turbines in different specific speeds
450
Experimental Study of Charging Efficiencies and Losses of Submicron Aerosol Particles in a Cylindrical Tri-Axial Charger
451
Experimental Study of Chemical Absorption of CO2 in a Bench-Scale Spray Dryer Absorber
452
Experimental study of chemical conversion of methanol and ethylene glycol in a film boiling reactor
453
Experimental Study of Chemical De-scaling-I: Effect of Acid Concentration
454
Experimental study of chemical kinetics and simulation of 5-O-caffeoylquinic acid oxidation during manufacturing of mate (Ilex Paraguariensis)
455
Experimental study of chemical treatment of coal fly ash to reduce the mobility of priority trace elements
456
Experimental study of chilled water by using aluminum (Al) Nanofluid
457
Experimental study of Cl solubility in hydrous alkaline melts: constraints on the theoretical maximum amount of Cl in trachytic and phonolitic melts
458
Experimental study of clinopyroxenite partial melting and the origin of ultra-calcic melt inclusions
459
Experimental Study of CO2 Absorption in Potassium Carbonate Solution Promoted by Triethylenetetramine
460
Experimental study of CO2 hydrate formation kinetics with and without kinetic and thermodynamic promoters
461
Experimental Study of Coal Gasification Coupling with Natural Gas Autothermal Re-Forming for Synthesis Gas Production
462
Experimental study of coal liberation: Electrical disintegration versus roll-crusher comminution
463
Experimental Study of Coal Topping Process in a Downer Reactor
464
Experimental Study of Coating in a Bottom Sprayed Fluidized Bed
465
Experimental study of collision between a free–free beam and a simply supported beam
466
Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine
467
Experimental study of combustion in a double-layer burner packed with alumina pellets of different diameters
468
Experimental study of combustion in a spark ignition engine operating with producer gas from various biomass feedstocks
469
Experimental study of combustion of hydrogen–syngas/methane fuel mixtures in a porous burner
470
Experimental study of commercial size proton exchange membrane fuel cell performance
471
Experimental study of compact FEL with micro wiggler and electrostatic accelerator
472
Experimental study of compact FEL with micro wiggler and electrostatic accelerator
473
EXPERIMENTAL STUDY OF COMPOSITE STRUCTURES IN AUTOMOTIVE APPLICATIONS
474
Experimental study of compressibility, roughness and rarefaction influences on microchannel flow
475
Experimental study of compressive strength, permeability and impact testing in geopolymer concrete based on Blast furnace slag
476
Experimental study of concentration polarization in a crossflow reverse osmosis system using Digital Holographic Interferometry Original Research Article
477
Experimental study of concrete abrasion due to ice friction — Part I: Set-up, ice abrasion vs. material properties and exposure conditions
478
Experimental study of concrete abrasion due to ice friction — Part II: Statistical representation of abrasion rates and simple, linear models for estimation
479
Experimental Study of Concrete Subjected to Explosive Loading
480
Experimental study of condensation heat transfer of R-134a flow in corrugated tubes with different inclinations
481
Experimental study of conjugate heat transfer within a bottom heated vertical concentric cylindrical enclosure
482
Experimental study of constructal distributor for flow equidistribution in a mini crossflow heat exchanger (MCHE)
483
Experimental study of contaminant mixing through the buried river junctions
484
Experimental Study of Control of Human Body Electrostatic Discharge (ESD) Using Passive and Active Guard Electrodes
485
Experimental study of convection and radiation interaction in a headlight model using pressure variation
486
Experimental study of convective condensation in an inclined smooth tube. Part I: Inclination effect on flow pattern and heat transfer coefficient
487
Experimental study of convective condensation in an inclined smooth tube. Part II: Inclination effect on pressure drops and void fractions
488
Experimental study of convective heat transfer and pressure drop of TiO2/water nanofluid
489
Experimental study of convective heat transfer coefficient of MgO nanofluid in a cylindrical microchannel heat sink
490
Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow
491
Experimental study of convective heat transfer from the surface of a gyratory lantern
492
Experimental study of convective heat transfer from windows with Venetian blinds
493
EXPERIMENTAL STUDY OF CONVECTIVE HEAT TRANSFER INSTABILITIES IN TRANSIENT RESPONSE ALONG A COUNTERCURRENT HEAT EXCHANGER
494
Experimental study of cooling effects of a passive evaporative cooling wall constructed of porous ceramics with high water soaking-up ability
495
Experimental Study of Corner Stall in a Linear Compressor Cascade
496
Experimental study of corrosion behavior for burnished aluminum alloy by EWF, EBSD, EIS and Raman spectra
497
Experimental study of corrosion fatigue behaviour of welded steel structures
498
Experimental study of corrosion of two stainless steels during the oxidative bacterial dissolution of pyrite using mass loss and electrochemical techniques
499
Experimental study of cosmonuclear physics at J-PARC Original Research Article
500
Experimental study of coupled vibration in a finite periodic dual-layered structure with transverse connection
501
Experimental study of CPC type ICS solar systems
502
Experimental study of cracking methane by Ni/SiO2 catalyst
503
Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface
504
Experimental study of crosswind effects on the performance of small cylindrical natural draft dry cooling towers
505
Experimental study of crushed aggregate shape
506
Experimental study of cryogen spray properties for application in dermatologic laser surgery
507
Experimental study of Cu isotope fractionation during the reaction of aqueous Cu(II) with Fe(II) sulphides at temperatures between 40 and 200 °C
508
Experimental study of current-dependent grounding resistance of rod electrode
509
Experimental Study of Cyclic Seismic Behavior of Steel Moment Connections Reinforced with Ribs
510
Experimental study of debris head loss through a pressurized water reactor recirculation sump screen after LOCA
511
Experimental study of deep drawability of hot rolled IF steel
512
Experimental study of delayed feedback control for a flexible plate
513
Experimental study of DEMO helium cooled divertor target mock-ups to estimate their thermal and pumping efficiencies
514
Experimental study of density-driven convection effects on CO2 dissolution rate in formation water for geological storage
515
Experimental study of desalination using direct contact membrane distillation: a new approach to flux enhancement
516
Experimental study of detritiation system catalyst poisoning
517
Experimental study of difference between streaming current and electroosmosis in single fused silica capillaries
518
Experimental study of different carbon dust growth mechanisms
519
Experimental study of diffusion flame oscillations and empirical correlations
520
Experimental study of diffusion welding/bonding of titanium to copper
521
Experimental study of directional aperture-coupled large-offset patch antenna with OS and BGP
522
experimental study of discharge coefficient of combination labyrinth weirs
523
Experimental study of discharge rate fluctuations in a silo with different hopper geometries
524
Experimental Study of Discriminative Adaptive Training and MLLR for Automatic Pronunciation Evaluation
525
Experimental study of disk vibration reduction via stacked disks
526
Experimental study of dislocation mobility in a Ti–6Al–4V alloy Original Research Article
527
Experimental study of distiller with heat pipe utilizing waste heat from a portable electric generator Original Research Article
528
Experimental study of distribution of energy during EDM process for utilization in thermal models
529
Experimental study of DOC, nutrients and metals release from forest floors developed under beech (Fagus sylvatica L.) on a Cambisol and a Podzol
530
Experimental study of domestic sewage treatment with a metal membrane bioreactor Original Research Article
531
Experimental study of drag reduction by a polymeric additive in slug two-phase flow of crude oil and air in horizontal pipes
532
Experimental study of drag-reduction mechanism for a dilute surfactant solution flow
533
Experimental study of drilling composite materials with step-core drill
534
Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up
535
Experimental study of drilling sub-10 mm holes in thin metal foils with femtosecond laser pulses
536
Experimental study of drop impacts and spreading on epicarps: Effect of fluid properties Original Research Article
537
Experimental study of drop-interface coalescence in the presence of polymer stabilisers
538
Experimental study of droplet temperature in a two-phase heptane/air V-flame
539
Experimental Study of Droplet Transport Time between Nozzles and Target
540
Experimental study of dropwise condensation on plasma-ion implanted stainless steel tubes
541
Experimental study of dry deposition of dust on the glass surface
542
Experimental study of dry reforming of biogas in a tubular anode-supported solid oxide fuel cell
543
Experimental study of drying kinetics by forced convection of aromatic plants
544
Experimental study of dual fuel engine performance using variable LPG composition and engine parameters
545
EXPERIMENTAL STUDY OF DUCTILITY ADEQUACY ON INTERIOR WALL-SLAB JOINT SUBJECTED TO LATERAL CYCLIC LOADING
546
Experimental study of dye removal from industrial wastewater by membrane technologies of reverse osmosis and nanofiltration
547
Experimental study of dynamic and noise produced by a gearing excited by a multi-harmonic excitation
548
Experimental study of dynamic barite sag in oil-based drilling fluids using a modified rotational viscometer and a flow loop
549
Experimental study of dynamic behaviors and routes to chaos in DC–DC boost converters
550
Experimental study of dynamic compressive properties of fibre reinforced concrete material with different fibres
551
Experimental study of dynamic crushing of thin plates stiffened by stamping with V-grooves
552
Experimental study of dynamic post-buckling characteristics of columns under fluid–solid slamming
553
Experimental Study of Dynamic Propagation of Local Snap-through in Single-layer Braced Domes
554
Experimental study of early-age behavior of high performance concrete deck slabs under different curing methods
555
Experimental study of effect of an inner thermal curtain in evaporative cooling system of a cascade greenhouse
556
Experimental Study of Effect of Glass Fibres on Properties of Concrete Containing Micro-silica and Limestone Powder
557
Experimental study of effect of laser machining process of CO2 on electrical conductivity and magnetic properties of PMMA/MWCNT composite
558
Experimental study of effective efficiency in a ceramic coated diesel engine
559
Experimental Study of Effective Parameters in Production of Carbamazepine Nanoparticles
560
Experimental Study of Effective Parameters on Honing Process of Cast Iron Cylinder
561
Experimental Study of Effects of Fly Ash On the Mechanical Properties of Hybrid Fiber Reinforced Cementitious Composite
562
Experimental Study of Effects of GO-SiO2-TiO2–SDS Hybrid Nanofluids on Interfacial Tension by Du Noüy Ring Method
563
Experimental study of efficiency of natural oxide layers for reduction of tritium permeation through Eurofer 97
564
EXPERIMENTAL STUDY OF EFFICIENT WIRELESS POWER TRANSFER SYSTEM INTEGRATING WITH HIGHLY SUB-WAVELENGTH METAMATERIALS
565
Experimental study of EHD conduction pumping at the meso- and micro-scale
566
Experimental study of electrical resistivity and flow stress of stainless steel 316L in electroplastic deformation
567
Experimental study of electrohydrodynamic pumping through conduction phenomenon
568
Experimental study of electromagnetic properties of the muon neutrino in neutrino-electron scattering
569
Experimental Study of Electro-Mechanical Dual Acting Pulley Continuously Variable Transmission Ratio Calibration
570
Experimental study of Electro-Plastic Effect on Advanced High Strength Steels
571
Experimental study of electroplastic effect on stainless steel wire 304L
572
Experimental study of electroplastic effect on stainless steel wire 304L
573
Experimental Study of Electrostatic Capture Mechanisms in Commercial Electret Filters
574
Experimental study of electrostatic precipitator performance and comparison with existing theoretical prediction models
575
Experimental study of ELID grinding based on the active control of oxide layer
576
Experimental study of ELNES at grain boundaries in alumina: intergranular radiation damage effects on Al-L23 and O-K edges
577
Experimental study of ELNES at grain boundaries in alumina: intergranular radiation damage effects on Al-L23 and O-K edges
578
EXPERIMENTAL STUDY OF ENERGY DISSIPATION OVER STEPPED GABION SPILLWAYS WITH LOW HEIGHTS
579
Experimental Study of Energy Efficiency of a Single Microtube
580
Experimental study of entrainment phenomenon in a trapped vortex combustor
581
Experimental study of environmental tobacco smoke particles under actual indoor environment
582
Experimental study of epoxy repairing of cracks in concrete
583
Experimental study of ethylene counterflow diffusion flames perturbed by trace amounts of jet fuel and jet fuel surrogates under incipiently sooting conditions
584
Experimental study of evaporating water–ethanol mixture sessile drop: influence of concentration
585
Experimental study of evaporation and isotopic mass fractionation of potassium in silicate melts
586
Experimental Study of Evaporation from Saline Tailings
587
Experimental study of evaporation heat transfer characteristics of refrigerants R-134a and R-407C in horizontal small tubes
588
Experimental study of evaporation pressure drop characteristics of refrigerants R-134a and R-407C in horizontal small tubes
589
Experimental Study of Evolution of Aqueous SiO2 in the Mineral Water in Basalt Beds of Jingyu County, China
590
Experimental study of excitation functions for the deuteron induced reactions 64Zn(d,2p)64Cu and 64Zn(d,αn)61Cu using the stacked-foil technique
591
Experimental study of externally prestressed segmental beam under torsion
592
Experimental study of extinction and its quantification in laminar and turbulent counterflow CH4–N2/O2–N2 nonpremixed flames
593
Experimental study of extinction of nonadiabatic counterflow premixed flames
594
Experimental study of extreme thrust on a tidal stream rotor due to turbulent flow and with opposing waves
595
Experimental study of failure and failure progression in T-stiffened skins
596
Experimental study of falling film evaporation heat transfer outside horizontal tubes Original Research Article
597
Experimental study of fast electron propagation in compressed matter
598
Experimental study of fast electron propagation in compressed matter
599
Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures
600
Experimental Study of Fe-Mg Exchange Reaction Between Orthopyroxene and Sapphirine and its Calibration as a Geothermometer
601
Experimental study of fibers in stabilizing and reinforcing asphalt binder
602
Experimental study of filling capacity of self-compacting concrete and its influence on the properties of rock-filled concrete
603
Experimental study of film flow and heat/mass transfer in LiBr–H2O solution flowing over a cooled horizontal tube
604
Experimental study of film media used for evaporative pre-cooling of air
605
EXPERIMENTAL STUDY OF FILTER CAKE FORMATION ON DIFFERENT FILTER MEDIA
606
Experimental study of filter clogging with monodisperse PSL particles
607
Experimental study of filterability behavior of model extracellular polymeric substance solutions in dead-end membrane filtration Original Research Article
608
Experimental study of filtration efficiency of nanoparticles below 20 nm at elevated temperatures
609
Experimental study of filtration system performance of natural gas in urban transmission and distribution network: A case study on the city of Kerman, Iran
610
Experimental study of fine particles removal in the desulfurated scrubbed flue gas
611
Experimental Study of Fire Retardant Coating
612
Experimental study of fire tube boilers performance for public heating
613
Experimental study of fixed-vane revolving vane compressor
614
Experimental study of flammability limits of oxy-methane mixture and calculation based on thermal theory
615
Experimental study of flash atomization of binary hydrocarbon liquids
616
Experimental study of flash evaporation of a water film
617
Experimental study of flat light-scattering substrates in thin-film silicon solar cells
618
Experimental study of flax FRP tube encased coir fibre reinforced concrete composite column
619
Experimental study of flow and heat transfer characteristics of natural convection in an enclosure with horizontal parallel heated plates
620
Experimental study of flow and heat transfer in rib-roughened rectangular channels
621
Experimental study of flow boiling heat transfer and dryout characteristics at low mass flux in helically-coiled tubes
622
Experimental study of flow boiling of FC-72 in parallel minichannels under sub-atmospheric pressure
623
Experimental Study of Flow Control on Bluff Body using Piezoelectric Actuators
624
Experimental Study of Flow Control on Bluff Body using Piezoelectric Actuators
625
Experimental Study of Flow in a Vortex Drop Shaft
626
EXPERIMENTAL STUDY OF FLOW PAST A LOW-RISE BUILDING
627
Experimental study of flow pattern and heat transfer associated with a bubble sliding on downward facing inclined surfaces
628
Experimental study of flow patterns in deoiling hydrocyclone
629
Experimental study of flow-induced crystallization in the blends of isotactic polypropylene and poly(ethylene-co-octene)
630
Experimental study of fluid flow and heat transfer characteristics in the square channel with a perforation baffle
631
Experimental study of fluid flow in horizontal and deviated wells during the artificial gas lift process
632
Experimental study of fluid flow in the entrance of a sinusoidal channel
633
Experimental study of fluid transport processes in the matrix system of the European organic-rich shales: I. Scandinavian Alum Shale
634
Experimental study of fly ash precipitation in a model electrostatic precipitator with discharge electrodes of different design
635
Experimental Study of Foam Flooding in Low Permeability Sandstones: Effects of Rock Permeability and Microscopic Heterogeneity
636
Experimental study of foam flow in horizontal pipes: Two flow regimes and its implications
637
Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli
638
Experimental study of forced circulation evaporator in zero discharge desalination process Original Research Article
639
Experimental study of forced convection from helical coiled tubes with different parameters
640
Experimental study of forced convection heat transfer from a cam shaped tube in cross flows
641
Experimental study of forced convection in asymmetrically heated sintered porous channels with/without periodic baffles
642
Experimental study of forced convective boiling for non-azeotropic refrigerant mixtures R-22/R-124 in horizontal smooth tube
643
Experimental study of forced convective heat transfer from a vertical tube conveying dilute Ag/DI water nanofluids in a cross flow of air
644
Experimental study of forced convective heat transfer in a different arranged corrugated channel
645
Experimental study of forced convective heat transfer of nanofluids in a microchannel
646
Experimental Study of Forced Heat Convection through a Vertical Porous Annuli
647
Experimental study of forming and tightening processes with thread forming screws
648
Experimental study of fracture behavior of magnesium single crystals
649
Experimental study of fracture toughness and energy in composite materials
650
Experimental study of free convection from a pair of vertical arrays of horizontal cylinders at very low Rayleigh numbers
651
Experimental study of free convective heat transfer in a direction-sensitive open cavity
652
Experimental study of friction and heat transfer characteristics in narrow rectangular channel
653
Experimental study of friction in sheet metal forming
654
Experimental study of friction reducer flows in microfracture
655
Experimental study of frost accumulation on fan-supplied tube-fin evaporators
656
Experimental study of FRP confined concrete cylinders
657
Experimental study of FRP tube encased concrete cylinders exposed to fire
658
Experimental study of FRP-strengthened RC bridge girders subjected to fatigue loading
659
Experimental study of fruit temperature dynamics within apple tree crowns
660
Experimental study of fuel decomposition and hydrocarbon growth processes for cyclohexane and related compounds in nonpremixed flames
661
Experimental study of fuel decomposition and hydrocarbon growth processes for practical fuel components: heptanes
662
Experimental Study of Fuel Regression Rate in a HTPB/N2O Hybrid Rocket Motor
663
Experimental study of fuel stratification for HCCI high load extension
664
Experimental study of gas and liquid permeability of a mortar
665
Experimental study of gas diffusion in cement paste
666
Experimental study of gas humidification with injectors for automotive PEM fuel cell systems
667
Experimental study of gas hydrate formation and destabilisation using a novel high-pressure apparatus
668
Experimental study of gas production from hydrate dissociation with continuous injection mode using a three-dimensional quiescent reactor
669
Experimental study of gas/solid system mechanics of binary mixture of particles differing in size and/or density by one order of magnitude
670
Experimental study of gas-dynamically induced nanoparticle synthesis by use of adapted sampling probes
671
Experimental study of gaseous and particulate contaminants distribution in an aircraft cabin
672
Experimental study of gaseous effluent and solid conversion in a fluidized bed hydrolysis reactor for hydrogen production
673
Experimental Study of gas–liquid two-phase flow affected by wall surface wettability
674
Experimental study of gear rattle excited by a multi-harmonic excitation
675
Experimental study of geotextile as plinth beam in a pile group-supported modeled building frame
676
Experimental study of geotextile\ʹs drainage and filteration propertis under different hydraulic gradients and confining pressures
677
Experimental Study of Germanium Dry Machining with Various Rake Angles and Different Feed Rates of Tool
678
Experimental study of glass-fiber mat thermoplastic material impact properties and lightweight automobile body analysis
679
Experimental Study of Glow Discharge Plasma Properties at the middle Distance between Anode and Cathode for Aluminum Electrodes
680
Experimental study of graded bandgap Cu(InGa)(SeS)2 thin films grown on glass/molybdenum substrates by selenization and sulphidation
681
Experimental study of granular bed filtration of ultrafine particles emitted by a thermal spraying process
682
Experimental study of graphite particle deposition upstream of a forward-facing step
683
Experimental study of grease flow in pipelines: wall slip and air entrainment effects
684
Experimental study of hadron properties in the nuclear medium Original Research Article
685
Experimental Study of Heat and Mass Transfer for Liquid Film Evaporation along a Vertical Plate Covered With a Porous Layer
686
Experimental Study of Heat and Mass Transfer on an Absorber with Several Enhancement Tubes
687
Experimental Study of Heat and Mass Transfer on an Absorber with Several Enhancement Tubes
688
Experimental study of heat regimes on a dry, partially or completely wetted and liquid filled catalyst particle
689
Experimental study of heat transfer additive influence on the absorption chiller performance
690
Experimental study of heat transfer and air flow in a refrigerated display cabinet Original Research Article
691
Experimental study of heat transfer and flow friction insolar air heaters with and without selective absorbers
692
Experimental study of heat transfer and fluid flow in longitudinal rectangular-fin array located in different orientations in fluid flow
693
Experimental study of heat transfer and pressure drop in micro-channel based heat sinks with tip clearance
694
Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater
695
Experimental Study of Heat Transfer Augmentation Characteristics of a Tube Affected by Geometric Parameters of Coiled Spring Inserts
696
Experimental study of heat transfer by natural convection in a closed cavity: application in a domestic refrigerator Original Research Article
697
Experimental study of heat transfer characteristic on jet impingement cooling with film extraction flow
698
Experimental study of heat transfer characteristics for a refrigerator by using reverse heat loss method
699
Experimental study of heat transfer characteristics of nanofluid nucleate and film boiling on horizontal flat plate
700
Experimental study of heat transfer characteristics of supercritical CO2 fluid in collectors of solar Rankine cycle system
701
Experimental study of heat transfer coefficient on hot steel plate during water jet impingement cooling
702
Experimental study of heat transfer coefficients in ITER vacuum vessel cooling channels
703
EXPERIMENTAL STUDY OF HEAT TRANSFER DURING FILM CONDENSATION IN TRANSIENT CONDITIONS IN A VERTICAL SMOOTH TUBE
704
Experimental study of heat transfer enhancement in a drag-reducing two-dimensional channel flow
705
Experimental study of heat transfer enhancement in a flat-plate solar water collector with wire-coil inserts
706
Experimental Study of Heat Transfer Enhancement in a Heated Tube Caused by Wire-Coil and Rings
707
Experimental study of heat transfer enhancement in an asymmetrically heated rectangular duct with perforated baffles
708
Experimental study of heat transfer enhancement in electrohydrodynamic conduction pumping of liquid film using flush electrodes
709
Experimental study of heat transfer enhancement using water/ethylene glycol based nanofluids as a new coolant for car radiators
710
Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers
711
Experimental study of heat transfer in oscillating flow
712
Experimental study of heat transfer in pulsating turbulent flow in a pipe
713
Experimental study of heat transfer intensification by using a novel combined shelf in food refrigerated display cabinets (Experimental study of a novel cabinets)
714
Experimental study of heat transfer of buried finned pipe for ground source heat pump applications
715
Experimental study of heat transfer performance in a flattened AGHP
716
Experimental Study of Heat Transfer Rate in a Shell and Tube Heat Exchanger with Air Bubble Injection (TECHNICAL NOTE)
717
Experimental study of heavy oil underground aquathermolysis using catalyst and ultrasonic
718
Experimental study of high electric current effects in carbon/epoxy composites
719
Experimental study of high frequency stochastic resonance in Chua circuits
720
Experimental study of high-density gas–solids flow in a new coupled circulating fluidized bed
721
Experimental study of high-energy resolution lead/scintillating fiber calorimetry in the 600–1200 MeV energy region
722
Experimental study of high-energy resolution lead/scintillating fiber calorimetry in the 600–1200 MeV energy region
723
Experimental study of high-power pulse side-pumped Nd:YAG laser
724
Experimental study of high-power, saturated amplification in a sheet-beam, small-period-wiggler FEL (with applications to magnetic fusion research)
725
Experimental study of high-power, saturated amplification in a sheet-beam, small-period-wiggler FEL (with applications to magnetic fusion research)
726
Experimental study of high-pressure turbulent premixed flames
727
Experimental study of high-temperature foam for acid diversion
728
Experimental study of high-velocity impact and fracture of ice
729
Experimental Study of Homogenizing Tahina by Using Common Food Additives
730
Experimental Study of Horizontal Barrier Formation by Colloidal Silica
731
Experimental study of hot air dehydration of Sultana grapes Original Research Article
732
Experimental study of hot deformation behavior in API X65 steel
733
Experimental study of human-induced dynamic forces due to jumping on a perceptibly moving structure
734
Experimental study of humic acid adsorption onto bacteria and Al-oxide mineral surfaces
735
Experimental study of hybrid composite beams
736
Experimental study of hybrid composite cylinders
737
Experimental study of hybrid FRP reinforced concrete beams
738
Experimental study of hydraulic engine mounts using multiple inertia tracks and orifices: Narrow and broad band tuning concepts
739
Experimental Study of Hydraulic Flow of Circular Piano-Key Inlet in Shaft Spillways
740
Experimental study of hydraulic fracturing for shale by stimulated reservoir volume
741
Experimental study of hydraulic-sediment properties on deltaic sedimentation in reservoirs
742
Experimental study of hydrocarbon hydrogenation and dehydrogenation reactions in silicon microfabricated reactors of two different geometries
743
Experimental study of hydrocarbon mixtures to replace HFC-134a in a domestic refrigerator
744
EXPERIMENTAL STUDY OF HYDROCARBON R290 IN WATER COOLER REFRIGERATION SYSTEM
745
Experimental study of hydrocarbon structure effects on the composition of its pyrolysis products
746
Experimental study of hydrocarbon structure effects on the composition of its pyrolysis products
747
Experimental study of hydrodynamic characteristics of improved sieve tray with push valves
748
Experimental study of hydrodynamics in a flat ohmic cell—impact on fouling by dairy products Original Research Article
749
Experimental Study of Hydrogen and Methane Permeation through Asymmetric PEI Membranes
750
Experimental study of hydrogen embrittlement on AISI 304 stainless steels and Rayleigh wave characterization
751
Experimental study of hydrogen fluoride adsorption on sodium fluoride
752
Experimental study of hydrogen production and soot particulate matter emissions from methane rich-combustion in inert porous media
753
Experimental study of hydrogen production from reforming of methane and ammonia assisted by Laval nozzle arc discharge
754
Experimental study of hydrogen release accidents in a vehicle garage
755
Experimental study of hydrogen releases in the passenger compartment of a Piaggio Porter
756
Experimental study of hydrogen storage with reaction heat recovery using metal hydride in a totalized hydrogen energy utilization system
757
Experimental study of hydrogen, carbon dioxide and nitrogen permeation through a microporous silica membrane
758
Experimental study of hydrogen-rich/oxygen-rich gas–gas injectors
759
Experimental study of hydronic panels system and its environment
760
Experimental study of hydrothermal flames formation using a tubular injector in a refrigerated reaction chamber. Influence of the operational and geometrical parameters
761
Experimental study of hydrothermal flames initiation using different static mixer configurations
762
Experimental study of hydroxyalkyl peroxy radicals from OH-initiated reactions of isoprene
763
Experimental study of ice accretion on circular cylinders at moderate low temperatures
764
Experimental study of ice slurry performance in a standard fan coil
765
Experimental Study of IFTReduction in Fracture Carbonate Reservoir by Triton X-100
766
Experimental study of ignited unsteady hydrogen jets into air
767
Experimental study of ignited unsteady hydrogen releases from a high pressure reservoir
768
Experimental study of ignition of magnesium powder by electrostatic discharge
769
Experimental study of ILU preconditioners for indefinite matrices
770
Experimental study of immediate and time-dependent deflections of GFRP reinforced concrete beams
771
Experimental study of impact resistance in multi-walled carbon nanotube reinforced epoxy
772
Experimental study of impingement spray cooling for high power devices
773
Experimental study of impinging heat transfer along rib-roughened walls by using transient liquid crystal technique
774
Experimental study of improved two step synthesis for DME production
775
Experimental study of indentation fracture toughness in HVOF sprayed hardmetal coatings
776
Experimental study of indoor air quality, energy saving and analysis of ventilation norms in climatised areas
777
Experimental study of induced polarization relaxation time spectra of shaly sands
778
Experimental Study of Inducing Compressive Stress by Anti-welding Heating Treatment in a Thin Plate Weldment with Variant Temperatures
779
Experimental study of industrial gas turbine flames including quantification of pressure influence on flow field, fuel/air premixing and flame shape
780
Experimental study of industrial scale fullerene production by combustion synthesis Original Research Article
781
Experimental study of inelastic buckling strength and stiffness requirements for longitudinally stiffened panels
782
Experimental study of infrared nanosecond laser ablation of silicon: The multi-pulse enhancement effect
783
Experimental study of infrared-convective drying of hydrous ferrous sulphate
784
Experimental study of initial strengths and hygrothermal degradation of adhesive joints between thin aluminum and steel substrates
785
Experimental Study of Inorganic and Methylmercury Bioaccumulation by Four Species of Freshwater Rooted Macrophytes from Water and Sediment Contamination Sources
786
Experimental study of inspection on a metal plate with defect using ultrasound lock-in thermographic technique
787
Experimental study of inspection on SiC coated high-temperature alloy plates with defects using pulsed thermographic technique
788
Experimental study of intelligent controllers under uncertainty using type-1 and type-2 fuzzy logic
789
Experimental study of interfacial area transport in air–water two phase flow in a scaled 8 × 8 BWR rod bundle
790
Experimental study of interfacial area transport of bubbly flow in small-diameter tube
791
Experimental study of interference drag for multi-element objects
792
Experimental study of internal fields and movement of single ferroelectric domain walls Original Research Article
793
Experimental study of inverted annular film boiling in a vertical tube cooled by R-134a
794
Experimental Study of Jet Agitation Effects on Agrochemical Mixing in Sprayer Tanks
795
Experimental study of jet structure and pressurisation upon liquid nitrogen injection into water
796
Experimental study of kerogen maturation by solid-state 13C NMR spectroscopy
797
Experimental study of La(OH)3 and Gd(OH)3 solubilities (25 to 150°C), and La–acetate complexing (25 to 80°C)
798
Experimental study of laminar blood flow through an artery treated by a stent implantation: characterisation of intra-stent wall shear stress
799
Experimental study of laminar-turbulent transition on a swept wing with local boundary-layer suction at subsonic velocities
800
Experimental study of large amplitude vibrations of a thin plate in contact with sloshing liquids
801
Experimental study of laser Doppler vibrometer and ambient vibration for vibration-based damage detection
802
Experimental study of laser–cheese interaction for making of thin cheese slices with complex shapes Original Research Article
803
Experimental study of laser-induced plasma: Influence of laser fluence and pulse duration
804
Experimental Study of Lateral Loading on Piled Raft Foundations on Sandy Soil
805
Experimental study of lateral restraint effects on the potential heave of expansive soils
806
Experimental study of lead (II) removal using polymorphous silica adsorbents
807
Experimental study of lean premixed turbulent combustion in a scale gas turbine chamber
808
Experimental study of LEC GaAs detectors for X-ray digital radiography
809
Experimental study of LEC GaAs detectors for X-ray digital radiography
810
Experimental study of libration-driven zonal flows in a straight cylinder
811
Experimental study of libration-driven zonal flows in non-axisymmetric containers
812
Experimental study of light scattering and extinction on the aggregates of soot particles
813
Experimental study of lightning-induced voltage on an overhead wire over lossy ground
814
Experimental study of limestone and sandstone sulphation in polluted realistic conditions: The Lausanne Atmospheric Simulation Chamber (LASC)
815
Experimental study of limit lean methane/air flame in a standard flammability tube using particle image velocimetry method
816
Experimental study of liquid carryover in a separator drum Original Research Article
817
Experimental study of liquid drop impact onto a powder surface
818
Experimental study of liquid metal embrittlement for the aluminum 7075–mercury couple
819
Experimental study of lithium free-surface flow for IFMIF target design
820
Experimental study of lithium MHD flow in slotted channel from V–4Ti–4Cr alloy
821
Experimental study of lithium target under high power load
822
Experimental study of load bearing cold-formed steel wall systems under fire conditions
823
Experimental Study of Local Buckling, Overstrength, and Fracture of Links in Eccentrically Braced Frames
824
Experimental Study of Local Buckling, Overstrength, and Fracture of Links in Eccentrically Braced Frames
825
Experimental study of local scour around a vertical pier in cohesive soils
826
Experimental study of local strong parity violation in relativistic nuclear collisions Original Research Article
827
Experimental study of local thermal non-equilibrium phenomena during phase change in porous media
828
Experimental study of long T300 carbon fibre undulations during the curing of LY556 epoxy resin
829
EXPERIMENTAL STUDY OF LOOSENING OF THREADED FASTENERS DUE TO DYNAMIC SHEAR LOADS
830
Experimental study of Love wave sensor response by phase and group velocity measurement
831
Experimental Study of Low Speed Impact Test on the Fiber-Metal Composite Toughened with NBR Elastomer
832
Experimental study of low yield point steel gusset plate connections
833
Experimental study of low-frequency oscillations and large-scale circulations in turbulent mixed convection
834
Experimental study of L-shaped slender R-ICF shear walls under cyclic lateral loading
835
Experimental study of lubricant-slider interactions
836
Experimental Study of Macro- and Microbehavior of Natural Diatomite
837
Experimental study of macro–micro dynamic behaviors of 5A0X aluminum alloys in high velocity deformation
838
Experimental study of magnesia and M/P ratio influencing properties of magnesium phosphate cement
839
Experimental Study of Management Systems for Emission Reduction in Ignition Engines
840
Experimental study of Markstein number effects on laminar flamelet velocity in turbulent premixed flames
841
Experimental Study of Masonry Structure under Impact Loading and Comparing it with Numerical Modeling Results via Finite Element Model Updating
842
Experimental study of mass recovery adsorption cycles for ice making at low generation temperature
843
Experimental study of mass transfer and H2S removal efficiency in a spray tower
844
Experimental study of mechanical and electrical properties of carbon nanofiber/epoxy composites
845
Experimental study of mechanical behaviour of cement paste under compressive stress and chemical degradation
846
Experimental Study of Mechanical Behaviour of Rock Joints Under Cyclic Loading
847
Experimental study of mechanical microvascular anastomosis with new biodegradable ring device
848
Experimental study of mechanical properties and scratch resistance of ultra-thin diamond-like-carbon (DLC) coatings deposited on glass
849
Experimental study of mechanical properties of composite carbon screws
850
Experimental Study of Mechanical Properties of Geopolymer Concrete as Green Concrete with a Sustainable Development Approach in the Construction Industry, Under High Temperature
851
Experimental Study of Mechanical Properties of Slag Geopolymer Concrete under High Temperature, Used in Road Pavement
852
Experimental study of melting of composite phase change materials used in honeycomb energy storage system
853
Experimental study of membrane distillation with brine circulated in the cold side
854
Experimental study of mercury removal from exhaust gases
855
Experimental study of merged flames from multifire sources in propane and wood crib burners
856
Experimental study of metal hydride-based hydrogen storage tank at constant supply pressure
857
Experimental study of metal ions removal from aqueous solutions by complexation–ultrafiltration
858
Experimental study of methane and carbon dioxide solubility in 1,4 butylene glycol at pressures up to 11 MPa and temperatures ranging from 303 to 423 K
859
Experimental Study of Methane Hydrate Formation in the Presence and Absence of Tetra n-butylammonium Chloride and Sodium Dodecyl Sulfate
860
Experimental study of methane hydrate formation kinetics with or without additives and modeling based on chemical affinity
861
Experimental study of methylene blue adsorption from aqueous solutions onto Fe3O4/NiO nano mixed oxides prepared by ultrasonic assisted co-precipitation
862
Experimental study of MHD effects on turbulent flow of Flibe simulant fluid in circular pipe
863
Experimental study of micro/macro crack development and stress–strain relations of cement-based composite materials at elevated temperatures
864
Experimental study of micro-porous layers for PEMFC with gradient hydrophobicity under various humidity conditions
865
Experimental study of micro-thermophotovoltaic systems with different combustor configurations
866
Experimental study of miscibility, density and isobaric vapor-liquid equilibrium values for mixtures of methanol in hydrocarbons (C5, C6)
867
Experimental study of mismatch and shading effects in the I–V characteristic of a photovoltaic module
868
Experimental study of mist generated from metalworking fluids emulsions
869
Experimental study of mixed convection and pressure drop in helically dimpled tubes for laminar and transition flow
870
Experimental study of modification of neutron spectrum using filters
871
Experimental study of modification of neutron spectrum using filters
872
Experimental study of molecular hydrogen influence on carbon particle growth in acetylene pyrolysis behind shock waves
873
Experimental study of moment redistribution in RC frames strengthened with CFRP sheets
874
Experimental study of monazite/melt partitioning with implications for the REE, Th and U geochemistry of crustal rocks
875
Experimental Study of Monitoring and Controlling of Composite Cure Process in Autoclave Featured with Fiber Optic Sensor
876
Experimental study of monodisperse granular flow through an inclined rotating chute
877
Experimental Study of Motion of Nitrogen Taylor Bubbles and Liquid Slugs in Inclined Tubes
878
Experimental study of movement and distribution of dense organic contaminants in heterogeneous aquifers
879
Experimental study of multi-hole cooling for integrally-woven, ceramic matrix composite walls for gas turbine applications
880
Experimental study of multiple glass transitions within a material
881
Experimental study of multipurpose solar hot box at Freiburg, Germany
882
Experimental study of nanofluid effects on heat transfer in closed cycle system in shell and tube heat exchangers at Isfahan power plant
883
Experimental study of nanofluid effects on the thermal performance with response time of heat pipe
884
Experimental Study of Nanofluids Flow in a Micromodel as Porous Medium
885
Experimental study of nanoparticles penetration through commercial filter media
886
Experimental study of nanostructured silicon carbide film formation by hypersonic plasma particle deposition
887
Experimental study of natural brine solar ponds in Tibet
888
Experimental study of natural convection heat transfer from an enclosed assembly of thin vertical cylinders
889
Experimental study of natural convection heat transfer from vertical array of isothermal horizontal elliptic cylinders
890
Experimental study of natural convection heat transfer of air in a cube below atmospheric pressure
891
Experimental Study of Natural Convection Heat Transfer of Air Layers in Vertical Annuli Under High Rayleigh Number Conditions
892
Experimental Study of Natural Convection Heat Transfer of Air Layers in Vertical Annuli Under High Rayleigh Number Conditions
893
Experimental study of natural convection in a square enclosure using differential interferometer
894
Experimental study of natural convection in fluid-superposed porous layers heated locally from below
895
Experimental Study of Natural Convective Flow over a Hot Horizontal Rhombus Cylinder Immersed in Water via PIV Technique
896
EXPERIMENTAL STUDY OF NATURAL-CONVECTION PLUMES FROM A HEATED HORIZONTAL SQUARE PLATE AND A VERTICAL CYLINDER Irma Welling
897
EXPERIMENTAL STUDY OF NATURAL-CONVECTION PLUMES FROM A HEATED HORIZONTAL SQUARE PLATE AND A VERTICAL CYLINDER Irma Welling LOW REYNOLDS NUMBER FORCED CONVECTION IN MICRO WIRE SCREENS AT ATMOSPHERIC PRESSURE AND LOW PRESSURES
898
Experimental study of n-butanol additive and multi-injection on HD diesel engine performance and emissions
899
Experimental study of Nd:YAG laser beam machining—An overview Review Article
900
Experimental Study of Near Wake Flow Behind a Rectangular Cylinder
901
Experimental study of negative ion profiles in H2-MAR plasmas in divertor simulator MAP-II
902
Experimental study of new diagnostic system for coronary artery disease using coronary transit index
903
Experimental study of new refrigerant mixtures to replace R12 in domestic refrigerators
904
Experimental study of n-Heptane pool fire behavior in an altitude chamber
905
Experimental study of Ni/CeO2 catalytic properties and performance for hydrogen production in sulfur–iodine cycle
906
Experimental study of Ni/MgO catalyst in carbon dioxide reforming of toluene, a model compound of tar from biomass gasification
907
Experimental study of Ni3Al slip traces by atomic force microscopy: an evidence of mobile dislocation exhaustion
908
Experimental study of Ni3Al slip traces by atomic force microscopy: an evidence of mobile dislocation exhaustion
909
Experimental study of Ni3Al slip traces by atomic force microscopy: an evidence of mobile dislocation exhaustion
910
Experimental Study of Nitrate Absorption Isotherms Determination on Latium Composite Overactive Carbon
911
Experimental study of NO and NO2 formation in a PF oxy-fuel firing system
912
Experimental study of NO reduction over biomass char
913
EXPERIMENTAL STUDY OF NOISE PRODUCED BY STEADY FLOW THROUGH A SIMULATED VASCULAR STENOSIS
914
Experimental study of non-boiling heat transfer from a horizontal surface by water sprays
915
Experimental study of non-circular concrete elements actively confined with shape memory alloy wires
916
Experimental study of nonfuel hydrocarbon concentrations in coflowing partially premixed methane/air flames
917
Experimental study of nonfuel hydrocarbons and soot in coflowing partially premixed ethylene/air flames
918
Experimental study of nonlinear beam dynamics at VEPP-4M
919
Experimental study of nonlinear beam dynamics at VEPP-4M
920
Experimental study of non-linear effects in a typical shear lap joint configuration
921
Experimental study of non-linear energy pumping occurring at a single fast frequency
922
EXPERIMENTAL STUDY OF NON-LINEAR VIBRATIONS IN A LOUDSPEAKER CONE
923
Experimental study of nonlinear wave parameters in mortar
924
Experimental study of non-uniform inlet conditions and three-dimensional effects of vertical air–water two-phase flow in a narrow rectangular duct
925
Experimental study of nucleate boiling heat transfer enhancement by using surfactant
926
Experimental study of nucleate boiling heat transfer enhancement in a confined space
927
Experimental study of nucleate boiling of halocarbon refrigerants on cylindrical surfaces
928
Experimental study of nucleate pool boiling of FC-72 on micro-pin-finned surface under microgravity
929
Experimental study of nucleate pool boiling of R134a on a stainless steel tube
930
Experimental study of oblique impacts with initial spin
931
Experimental Study of Octagonal Steel Columns Filled with Plain and Fiber Concrete under the Influence of Compressive Axial Load with Eccentricity
932
Experimental study of octanol–water partition coefficients for2,4,6-trichlorophenol and pentachlorophenol: Derivation of an empirical model of chlorophenol partitioning behaviour
933
Experimental Study of Offset HSS Connections
934
Experimental study of oil cooling systems for electric motors
935
Experimental study of oil cooling systems for electric motors
936
Experimental Study of Oil Shale and Olive Cake Dust Explosion by Burning Mixtures of Coarse and Fine Particles
937
Experimental study of oil–water two-phase flow in a capillary model
938
Experimental Study of One-Shot Vascular Anastomostic Device for Proximal Vein Graft Anastomoses
939
Experimental study of onset of laminar–turbulent transition in mixed convection in a vertical heated tube
940
Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics
941
Experimental study of opposed flow flame spread over wood fiber/thermoplastic composite materials
942
Experimental study of optical gain and loss in 3.4-3.6 (mu)m interband cascade lasers
943
Experimental study of ordering kinetics in aluminum alloys during solidification Original Research Article
944
Experimental study of overall heat transfer coefficient in the application of dilute nanofluids in the car radiator
945
Experimental Study of Oxidant Effect on Lifetime of PEM Fuel Cell
946
Experimental study of oxygen diffusion and permeation through YBa2Cu3O7−x membranes
947
Experimental study of oxytetracycline retention by adsorption onto polyaniline coated peanut shells
948
Experimental Study of Packing Time and Melt Temperature Effects on Shrinkage of a Thin Sheet Made of Wood-HDPE Composite
949
Experimental study of PAH formation in laminar counterflow CH4-N2/O2 -N2 and C3H8-N2/O2-N2 nonpremixed flames
950
Experimental study of PAH formation in laminar counterflow CH4single bondN2/O2single bondN2 and C3H8single bondN2/O2single bondN2 nonpremixed flames
951
Experimental Study of Parameters Affecting Friction Reduction in Solid-Liquid Interfaces using Ultrasonic Vibrations
952
Experimental study of parameters and high-order values of velocity in the behind wake of a vehicle model
953
Experimental study of parameters influencing mechanical properties of hemp concretes
954
Experimental study of parameters which influence the energy minimum in horizontal gas–solid conveying
955
Experimental study of partially shear-connected composite beams with profiled sheeting
956
Experimental study of partially shear-connected composite beams with profiled sheeting
957
Experimental study of partially-cured Z-pins reinforced foam core composites: K-Cor sandwich structures
958
Experimental study of particle flow in a gas–solid separator with baffles using PDPA
959
Experimental study of particle formation from the NH3---HCl reaction in a high-temperature environment
960
Experimental study of particle incorporation during dendritic solidification
961
Experimental study of particle incorporation during dendritic solidification
962
Experimental study of particle rotation characteristics with high-speed digital imaging system
963
Experimental study of particle separation in a LKr ionization chamber by dE/dχ method using the shape analysis of the signal
964
Experimental study of particle trajectory in electrostatics powder coating process
965
Experimental study of passivating ion-beam-induced distributed energy levels in n-GaAs by hydrogen species from boiling water
966
Experimental study of passive systems thermal performance
967
Experimental study of Perceptron-type local learning rule for Hopfield associative memory
968
Experimental Study of Perforated Infill Panels for Retrofitting Flat Plates
969
Experimental study of perforation and cracking of water-filled aluminum tubes impacted by steel spheres
970
Experimental study of perforation of multi-layered targets by hemispherical-nosed projectiles
971
Experimental study of performance of a dry cooling and dedicated ventilation (DCDV) system under different space cooling load conditions
972
Experimental study of performance of pattern classifiers and the size of design samples
973
EXPERIMENTAL STUDY OF PERFORMANCE OF SPARK IGNITION ENGINE WITH GASOLINE AND NATURAL GAS
974
Experimental study of periacetabular deformations before and after implantation of HIP prostheses
975
Experimental study of peripheral-blood pro-surfactant protein B for screening non-small cell lung cancer
976
Experimental study of PFCs erosion under ITER-like transient loads at plasma gun facility QSPA
977
Experimental Study of Phase Change Process of the Paraffin as a PCM with Copper Foam and Iron Wool
978
Experimental study of phase equilibria and solidification microstructures of Mg–Ca–Ce alloys combined with thermodynamic modeling
979
Experimental study of phase equilibria in aqueous mixtures of phosphoric acid with isoamyl acetate and methyl isoamyl ketone at T = (298.2, 308.2, and 318.2) K
980
Experimental Study of Phase Equilibria in the System PbO-ZnO-SiO,
981
Experimental Study of Phase Equilibria in the System PbO-ZnO-SiO,
982
Experimental Study of Phase Equilibria in the Systems Fe-Zn-O and Fe-Zn-Si-O at Metallic Iron Saturation
983
Experimental Study of Phase Inversion in n-Butylacetate-Water, Kerosene-Water, and n-Heptane-Water Systems in a Rotating Disc Contactor Column
984
Experimental study of phase-step broadening by fringing fields in a three-electrode liquidcrystal cell
985
Experimental study of phosphate salts influencing properties of magnesium phosphate cement
986
Experimental study of photocatalytic concrete products for air purification
987
Experimental study of photon beam polarimetry based on nuclear pair production in an amorphous target
988
Experimental study of photon beam polarimetry based on nuclear pair production in an amorphous target
989
Experimental study of photovoltaic solar assisted heat pump system
990
Experimental Study of Planar Langmuir Probe Characteristics in Electron Current-Carrying Magnetized Plasma
991
Experimental Study of Plasma Actuator Effects on Flow Field Separation Bubble around Blunt Flat Plate
992
EXPERIMENTAL STUDY OF PLASMA ACTUATOR EFFECTS ON FLOW FIELD SEPARATION BUBBLE AROUND BLUNT FLAT PLATE
993
Experimental Study of Plasma Actuator Effects on Flow Field Separation Bubble around Blunt Flat Plate
994
Experimental study of plasma energy transfer and material erosion under ELM-like heat loads
995
Experimental study of pleated fabric cartridges in a pulse-jet cleaned dust collector
996
Experimental study of polyaluminum chloride-chitosan coagulant for water treatment using response surface methodology
997
Experimental study of polymerization reactions on optically levitated microparticles by raman spectroscopy
998
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala
999
Experimental study of pool boiling heat transfer on horizontal metallic foam surface with crossing and single-directional V-shaped groove in saturated water
1000
Experimental study of pool temperature effects on nucleate pool boiling