بر اساس عنوان

1
Fabrication and electrocatalytic application of functionalized nanoporous carbon material with different transition metal oxides
2
FABRICATION AND ELECTROCATALYTIC APPLICATION OF NI-MODIFIED ELECTRODE TOWARD DETECTION OF PARACETAMOL
3
Fabrication and electrochemical activity of Ni-attached carbon nanotube electrodes for hydrogen storage in alkali electrolyte
4
Fabrication and electrochemical behavior of a sol–gel-derived carbon ceramic composite electrode entrapping 2:18-molybdodiphosphate
5
Fabrication and Electrochemical Behavior of Monoclinic CuO and CuO/Graphite Composite Nanoparticles as Cathode in an Alkaline Zn-CuO Battery
6
Fabrication and electrochemical behavior of nitride fuel for future applications
7
Fabrication and electrochemical behavior of single-walled carbon nanotube/graphite-based electrode
8
Fabrication and electrochemical capacitance of polyaniline/titanium nitride core–shell nanowire arrays
9
Fabrication and electrochemical capacitance of polyaniline/titanium nitride core–shell nanowire arrays
10
Fabrication and electrochemical characteristics of all-solid-state lithium-ion rechargeable batteries composed of LiMn2O4 positive and V2O5 negative electrodes
11
Fabrication and electrochemical characterization of a vertical array of MnO2 nanowires grown on silicon substrates as a cathode material for lithium rechargeable batteries
12
Fabrication and electrochemical characterization of cobalt-based layered double hydroxide nanosheet thin-film electrodes
13
Fabrication and electrochemical characterization of electrostatic assembly of polyelectrolyte-functionalized ionic liquid and Prussian blue ultrathin films
14
Fabrication and electrochemical characterization of planar Pt–CGO microstructures Original Research Article
15
Fabrication and electrochemical characterization of PVC based electrodialysis heterogeneous ion exchange membranes filled with Fe3O4 nanoparticles
16
Fabrication and electrochemical characterization of tape cast BaCe0.5Zr0.3Y0.16Zn0.04O3 − δ electrode/electrolyte structures
17
Fabrication and electrochemical characterization of two-dimensional ordered nanoporous manganese oxide for supercapacitor applications
18
Fabrication and electrochemical performance of Poly (2,5-benzimidazole) (ABPBI)-based MEA by catalyst coated membrane (CCM) method for high-temperature polymer electrolyte fuel cells
19
Fabrication and electrochemical properties of an interdigitated array electrode in a microfabricated wall-jet cell
20
Fabrication and electrochemical properties of carbon nanotube film electrodes Original Research Article
21
Fabrication and electrochemical properties of carbon nanotube/polypyrrole composite film electrodes with controlled pore size
22
Fabrication and electrochemical properties of lithium-ion batteries for power tools
23
Fabrication and electrochemical properties of polyvinyl alcohol/poly(3,4-ethylenedioxythiophene) ultrafine fibers via electrospinning of EDOT monomers with subsequent in situ polymerization
24
Fabrication and electrochemical properties of three-dimensional net architectures of anatase TiO2 and spinel Li4Ti5O12 nanofibers
25
Fabrication and electrochemical property of Ag-doped SiO2 nanostructured ribbons
26
Fabrication and electrochemical sensing performance of a composite film containing a phosphovanadomolybdate and cobalt(II) tetrasulfonate phthalocyanine
27
Fabrication and electrochemistry study of multi-thiol coronary molecule monolayers
28
Fabrication and electrogenerated chemiluminescence properties of uniform octahedral 8-hydroxyquinoline zinc (Znq2)
29
Fabrication and electromagnetic characteristics of electromagnetic wave absorbing sandwich structures
30
Fabrication and electromagnetic characteristics of microwave absorbers containing carbon nanofibers and NiFe particles
31
Fabrication and electromagnetic characteristics of microwave absorbers containing PPY and carbonyl iron composite
32
Fabrication and electromagnetic interference shielding effectiveness of carbon nanotube reinforced carbon fiber/pyrolytic carbon composites
33
Fabrication and electromagnetic properties of soft-core functional particles by way of electroless Ni–Fe–P alloy plating on helical microorganism cells
34
Fabrication and electron field-emission of carbon nanofibers grown on silicon nanoporous pillar array
35
Fabrication and electroosmotic flow measurements in micro- and nanofluidic channels
36
Fabrication and EMI shielding effectiveness of Ag-decorated highly porous poly(vinyl alcohol)/Fe2O3 nanofibrous composites
37
Fabrication and emission properties of Er3+/Yb3+ codoped tellurite glass fiber for broadband optical amplification
38
Fabrication and erosion studies of C–SiC composite Jet Vanes in solid rocket motor exhaust
39
Fabrication and estimation of Au-coated Fe3O4 nanocomposite powders for the separation and purification of biomolecules
40
Fabrication and ethanol-sensing properties of micro gas sensor based on electrospun SnO2 nanofibers
41
Fabrication and evaluation of (PVA/HAp/PCL) bilayer composites as potential scaffolds for bone tissue regeneration application
42
Fabrication and evaluation of [Co(phen)2L]3+-modified DNA-MWCNT and SDS-MWCNT electrodes for electrochemical detection of 6-mercaptopurine
43
Fabrication and evaluation of 100 Ah cylindrical lithium ion battery for electric vehicle applications
44
Fabrication and evaluation of 450 F electrochemical redox supercapacitors using inexpensive and high-performance, polyaniline coated, stainless-steel electrodes
45
FABRICATION AND EVALUATION OF A MACHINE FOR SEPARATING FIBER FLAX
46
Fabrication and evaluation of a Ni/La0.75Sr0.25Cr0.5Fe0.5O3−δ co-impregnated yttria-stabilized zirconia anode for single-chamber solid oxide fuel cells
47
Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer
48
Fabrication and evaluation of a passive alkaline membrane micro direct methanol fuel cell
49
Fabrication and evaluation of a ratchet type dielectrophoretic device for particle analysis
50
Fabrication and evaluation of a sustained-release chitosan-based scaffold embedded with PLGA microspheres
51
Fabrication and evaluation of actuators based on polymer electrolyte membranes
52
Fabrication and evaluation of auto-stripped tri-layer wound dressing for extensive burn injury
53
Fabrication and evaluation of biomimetic scaffolds by using collagen–alginate fibrillar gels for potential tissue engineering applications
54
Fabrication and evaluation of bioresorbable scaffolds for interventional cardiology application with sufficient drug release
55
Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing halloysite nanotubes
56
Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing nano fibrillar silicate
57
Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite
58
Fabrication and evaluation of chiral monolithic column modified by β-cyclodextrin derivatives
59
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks
60
Fabrication and Evaluation of Electrical Properties of Poly(1,8-diaminonaphthalene) Based Schottky Diode.
61
Fabrication and evaluation of electrospun nanofibrous antimicrobial nylon 6 membranes
62
Fabrication and Evaluation of Functionalized Nano-titanium Dioxide (F-NanoTiO2)/ polysulfone (PSf) Nanocomposite Membranes for Gas Separation
63
Fabrication and Evaluation of In Vitro Studies of Biodegradable and Antibacterial Composite Scaffolds Based on Polylactic Acid-Polycaprolactone- Hydroxyapatite Reinforced with Graphene and Zinc Oxide Nanoparticles for Use in Orthopedic Surgery
64
Fabrication and evaluation of inorganic–organic composite protonic conductors using inorganic sols as a dispersoid
65
Fabrication and evaluation of levofloxacin hemihydrate floating tablet
66
Fabrication and evaluation of low-cost agarose–zinc nanoporous composite matrix: Influence of adsorbent density and size distribution on the performance of expanded beds
67
Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites
68
Fabrication and evaluation of Nafion nanocomposite membrane based on ZrO2–TiO2 binary nanoparticles as fuel cell MEA
69
Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell
70
Fabrication and Evaluation of Physically Crosslinked Stimuli Sensitive Polymeric Blend of Pva-Gelatin as Drug Delivery System by Freeze Thaw Cycles
71
Fabrication and evaluation of plasma sprayed nanostructured alumina–titania coatings with superior properties
72
Fabrication and evaluation of plasma sprayed nanostructured alumina–titania coatings with superior properties
73
Fabrication and Evaluation of Pt/M (M= Co, Fe) Chitosan Supported Catalysts for Methanol Electrooxidation: Application in Direct Alcohol Fuel Cell
74
Fabrication and evaluation of Pt–Fe alloys as methanol tolerant cathode materials for direct methanol fuel cells
75
Fabrication and evaluation of PZT/Pt piezoelectric composites and functionally graded actuators
76
Fabrication and evaluation of SiC/Cu functionally graded material used for plasma facing components in a fusion reactor
77
Fabrication and evaluation of single- and dual-channel (Π-design) microchip electrophoresis with electrochemical detection
78
Fabrication and Evaluation of Spironolactone‑Loaded Nanostructured Lipid Carries for Cardiac Tissue Regeneration
79
Fabrication and evaluation of stable micro tubular solid oxide fuel cells with BZCY-BZY bi-layer proton conducting electrolytes
80
Fabrication and evaluation of temperature responsive molecularly imprinted sorbents based on surface of yeast via surface-initiated AGET ATRP
81
Fabrication and evaluation of the novel reduction-sensitive starch nanoparticles for controlled drug release
82
Fabrication and evaluation of the regenerative effect of a polycaprolactone/chitosan nanofibrous scaffold containing bentonite nanoparticles in a rat model of deep second-degree burn injury
83
Fabrication and evaluation of tissue engineering vascular scaffolds based on biodegradable aliphatic–aromatic copolyesters
84
Fabrication and evaluation of variable focus X-ray lenses
85
Fabrication and evaluation of variable focus X-ray lenses
86
Fabrication and evaluation of Zn containing fluoridated hydroxyapatite layer with Zn release ability
87
Fabrication and evolution of catalyst-coated membranes by direct spray deposition of catalyst ink onto Nafion membrane at high temperature
88
Fabrication and evolution of Cu nanoparticles in Al2O3 crystal by ion implantation and annealing at different atmospheres
89
Fabrication and excellent conductive performance of antimony-doped tin oxide-coated diatomite with porous structure
90
Fabrication and excitonic properties of Zn0.69Cd0.23Mn0.08Se/ZnSe quantum wires
91
Fabrication and experiment of a hydro-pneumatic semi-active resettable device
92
Fabrication and field emission characteristics of SnO2 electron sources based on planar-gate-type cathode arrays
93
Fabrication and field emission properties of boron nanowire bundles
94
Fabrication and field emission properties of boron nanowire bundles
95
Fabrication and field emission properties of multi-walled carbon nanotube/silicon nanowire array Original Research Article
96
Fabrication and flexural properties of Tyranno-SA/SiC composites with carbon interlayer by CVI
97
Fabrication and fluidic characterization of silicon micropillar array electrospray ionization chip
98
Fabrication and fluorescent labeling of guar gum nanoparticles in a surfactant free aqueous environment
99
Fabrication and formaldehyde gas-sensing property of ZnO–MnO2 coplanar gas sensor arrays
100
Fabrication and formation of bioactive anodic zirconium oxide nanotubes containing presynthesized hydroxyapatite via alternative immersion method
101
Fabrication and full characterization of state-of-the-art quantum dot luminescent solar concentrators
102
Fabrication and gain performance of Er3+/Yb3+-codoped tellurite glass fiber
103
Fabrication and gas sensing characteristics of pure and Pt-doped γ-Fe2O3 thin film
104
Fabrication and gas sensing performance of parallel assemblies of metal oxide nanotubes supported by porous aluminum oxide membranes
105
Fabrication and gas sensing properties of C-doped and un-doped TiO2 nanotubes
106
Fabrication and gas sensing properties of α-Fe2O3 thin film prepared by plasma enhanced chemical vapor deposition (PECVD)
107
Fabrication and gas sensitivity of polyaniline–titanium dioxide nanocomposite thin film
108
Fabrication and gas separation properties of polybenzimidazole (PBI)/nanoporous silicates hybrid membranes
109
Fabrication and gas transport properties of SWNT/polyacrylic nanocomposite membranes
110
Fabrication and gas-sensing properties of hierarchically porous ZnO architectures
111
Fabrication and geometrical factors of a novel piezoelectric composite
112
Fabrication and growth mechanism of carbon nanospheres by chemical vapor deposition
113
Fabrication and handling aspects of highly reactive powders
114
Fabrication and hard X-ray photoemission analysis of photocathodes with sharp solar-blind sensitivity using AlGaN films grown on Si substrates
115
Fabrication and hemocompatibility of cell outer membrane mimetic surfaces on chitosan by layer by layer assembly with polyanion bearing phosphorylcholine groups
116
Fabrication and high heat flux test of large mockups for ITER first wall semi-prototype
117
Fabrication and high heat flux test of the first wall mock-ups for the Korean He Cooled Test Blanket (KO HCML TBM)
118
Fabrication and high heat flux test with the first wall mockups for developing the KO TBM
119
Fabrication and high temperature oxidation resistance of ZrO2/Al2O3 micro-laminated coatings on stainless steel
120
Fabrication and high temperature thermoelectric properties of c-axis oriented Na0.68CoO:Ag nanocomposite thin films
121
Fabrication and high-temperature corrosion of sol–gel Mn/Co oxide spinel coating on AISI 430
122
Fabrication and humidity sensing properties of nanostructured TiO2–SnO2 thin films
123
Fabrication and hydrogen sorption behaviour of nanoparticulate MgH2 incorporated in a porous carbon host
124
Fabrication and icing property of superhydrophilic and superhydrophobic aluminum surfaces derived from anodizing aluminum foil in a sodium chloride aqueous solution
125
Fabrication and impedance studies of DMFC anode incorporated with CNT-supported high-metal-content electrocatalyst
126
Fabrication and implementation of large-area organic light-emitting-diode devices on direct patterned backplanes
127
Fabrication and improvement of the density of Li2TiO3 pebbles by the optimization of a sol–gel method
128
Fabrication and in vitro biocompatibility of biomorphic PLGA/nHA composite scaffolds for bone tissue engineering
129
Fabrication and in vitro characterization of magnetic hydroxycarbonate apatite coatings with hierarchically porous structures
130
Fabrication and in vitro drug release study of microsphere drug delivery systems based on amphiphilic poly-α,β-[N-(2-hydroxyethyl)-l-aspartamide]-g-poly(l-lactide) graft copolymers
131
Fabrication and In Vitro Evaluation of A Chondroitin Sulphate-Polycaprolactone Composite Nanofibrous Scaffold for Potential Use in Dermal Tissue Engineering
132
Fabrication and in vitro evaluation of a sponge-like bioactive-glass/gelatin composite scaffold for bone tissue engineering
133
Fabrication and in vitro evaluation of the collagen/hyaluronic acid PEM coating crosslinked with functionalized RGD peptide on titanium
134
Fabrication and infiltration kinetics analysis of Ti-coated diamond/copper composites with near-net-shape by pressureless infiltration
135
Fabrication and installation of equilibrium field coils for the JT-60SA
136
Fabrication and installation of KSTAR in-vessel control coils
137
Fabrication and integration of metal oxide nanowire sensors using dielectrophoretic assembly and improved post-assembly processing
138
Fabrication and interfacial structure of Al2O3/Ni laminar ceramics
139
Fabrication and Investigation of 3D Scaffold Using Hydroxyapatite and Gelatin Nanoparticles for Bone Cancer Treatment with Sufficient Chemical Stability
140
Fabrication and investigation of electrochemical characterization of Ba based cathodes
141
Fabrication and investigation of electrochromatographic columns with a simplex configuration
142
Fabrication and investigation of nanocomposites of conducting polymers and GaSb nanocrystals
143
Fabrication and investigation of PDMS micro-diffuser/nozzle
144
Fabrication and Investigation of SeGe GlassCeramics in the Presence of Ga and Sn Additives
145
Fabrication and investigation of SiO2 supported sulfated zirconia/Nafion® self-humidifying membrane for proton exchange membrane fuel cell applications
146
Fabrication and Investigation on Luminescence Properties of Bi2WO6 Microfibers via Stretching Process
147
Fabrication and In-vitro Evaluation of Buccal Mucoadhesive Tablet of Meloxicam
148
Fabrication and in-vitro Evaluation of Ketotifen Fumarate-loaded PLGA Nanoparticles as a Sustained Delivery System
149
Fabrication and ionic conductivity of amorphous Li–Al–Ti–P–O thin film
150
Fabrication and ionic conductivity of amorphous lithium meta-silicate thin film
151
Fabrication and ionic conductivity of Li2SiO3 thin film
152
Fabrication and its characteristics of metal-loaded TiO2/SnO2 thick-film gas sensor for detecting dichloromethane
153
Fabrication and kinetic studies of a novel silver nanoparticles–glucose oxidase bioconjugate Original Research Article
154
Fabrication and laser behaviors of Nd:YAG ceramic microchips
155
Fabrication and Life Prediction of SSiC Ceramic Joint Joined with Silicon Resin YR3370
156
Fabrication and liquefied petroleum gas (LPG) sensing performance of p-polyaniline/n-PbS heterojunction at room temperature
157
Fabrication and liquid–solid, two-phase erosion wear behaviour of β-Sialon ceramic from pyrophyllite by carbothermal reduction and nitridation
158
Fabrication and lithium electrochemistry of InSe thin film
159
Fabrication and luminance switching of flexible organic bistable light-emitting diodes on flexible substrate
160
Fabrication and luminescence properties of Al2O3:Tb3+ microspheres via a microwave solvothermal route
161
Fabrication and Luminescence Properties of Ca2Gd8 (SiO4)6O2: Er3+ Phosphors via Sol-Gel Process
162
Fabrication and luminescence properties of Dy3+ doped CaMoO4 powders
163
Fabrication and luminescence properties of Er3+ doped yttrium lanthanum oxide transparent ceramics
164
Fabrication and luminescence properties of one-dimensional ZnAl2O4 and ZnAl2O4: A3+ (A = Cr, Eu, Tb) microfibers by electrospinning method
165
Fabrication and luminescent properties of artificial luminous gem
166
Fabrication and luminescent properties of red phosphor M3BO6:Eu3+(M=La, Y)
167
Fabrication and luminescent properties of the core–shell structured YNbO4:Eu3+/Tb3+@SiO2 spherical particles
168
Fabrication and magnetic behavior of chemical deposited Ni–P nanowire and nanotube arrays
169
Fabrication and magnetic behaviour of Co film with ordered nanodot arrays
170
Fabrication and magnetic properties of Al2O3/Co nanocomposites
171
Fabrication and magnetic properties of amorphous Co0.71Pt0.29 nanowire arrays
172
Fabrication and magnetic properties of cobalt nanorod arrays containing a number of ultrafine nanowires electrodeposited within an AAO/SBA-15 template
173
Fabrication and magnetic properties of cobalt-dispersed-alumina composites
174
Fabrication and magnetic properties of Cu50(Fe69Si10B16C5)50 thin microwires
175
Fabrication and magnetic properties of Fe3O4 octahedra
176
Fabrication and magnetic properties of Fe–Pd nanowire arrays
177
Fabrication and Magnetic Properties of Highly Oriented ZnO : Eu Films by Sol-Gel Process
178
Fabrication and magnetic properties of NiFe2O4 nanocrystalline nanotubes
179
Fabrication and magnetic properties of ordered 20 nm Co–Pb nanowire arrays
180
Fabrication and magnetic properties of ordered Fe60Pb40 nanowire arrays electrodeposited in AAO templates
181
Fabrication and magnetic properties of Polyimide/Nickel Oxide nanocomposite
182
Fabrication and magnetic property of binary Co–Ni nanowire array by alternating current electrodeposition
183
Fabrication and magnetoelectric effect of 1–3 type composites with microscale (K,Na)NbO3-based Pb-free piezoceramic pillars embedded in CoFe2O4-epoxy matrix
184
Fabrication and measurements of plastic scintillating fibers
185
Fabrication and measurements of plastic scintillating fibers
186
Fabrication and mechanical behavior of Al matrix composites reinforced with porous ceramic of in situ grown whisker framework
187
Fabrication and mechanical behavior of powder metallurgy processed in situ Nb/Al sheet metal–metal composites
188
Fabrication and mechanical behavior of powder metallurgy processed in situ Nb/Al sheet metal–metal composites
189
Fabrication and mechanical characterization of a series of plastic Zr-based bulk metallic glass matrix composites
190
Fabrication and mechanical characterization of carbon/SiC-epoxy nanocomposites
191
Fabrication and mechanical characterization of zirconium and gadolinium hydrides
192
Fabrication and mechanical evaluation of hydroxyapatite/oxide nano-composite materials
193
Fabrication and mechanical properties (strength and fracture toughness) of chilled aluminum alloy–glass particulate composite
194
Fabrication and mechanical properties (strength and fracture toughness) of chilled aluminum alloy–glass particulate composite
195
Fabrication and mechanical properties of a tungsten wire reinforced Cu–Zr–Al bulk metallic glass composite
196
Fabrication and mechanical properties of Al2O3/Ti(C0.7N0.3) nanocomposites
197
Fabrication and mechanical properties of Al2O3–Ni composite from two different powder mixtures
198
Fabrication and mechanical properties of Al2O3–Si3N4/ZrO2–Al2O3 laminated composites
199
Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles
200
Fabrication and mechanical properties of bulk nanocrystalline intermetallic Mg2Si
201
Fabrication and mechanical properties of calcium phosphate cements (CPC) for bone substitution
202
Fabrication and mechanical properties of carbon nanotube yarns spun from ultra-long multi-walled carbon nanotube arrays Original Research Article
203
Fabrication and mechanical properties of carbon short fiber reinforced barium aluminosilicate glass–ceramic matrix composites
204
Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete
205
Fabrication and Mechanical Properties of Continuously Graded WSi2–ZrO2(2Y) Materials Using Wet-Molding
206
Fabrication and mechanical properties of Cr2O3 solid solution ceramics in the system Cr2O3-Al2O3
207
Fabrication and mechanical properties of exfoliated clay–CNTs/epoxy nanocomposites
208
Fabrication and mechanical properties of functionally graded material by electrophoretic deposition
209
Fabrication and mechanical properties of homogeneous zirconia toughened alumina ceramics via cyclic solution infiltration and in situ precipitation
210
Fabrication and mechanical properties of in situ prepared mesocarbon microbead/carbon nanotube composites
211
Fabrication and mechanical properties of metal matrix composite with homogeneously dispersed ceramic particles
212
Fabrication and mechanical properties of monolithic MoSi2 by spark plasma sintering
213
Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites
214
Fabrication and mechanical properties of nano-/micro-sized Al2O3/SiC composites
215
Fabrication and mechanical properties of nanosized SiC particulate reinforced yttria stabilized zirconia composites
216
Fabrication and mechanical properties of oriented SiC short-fiber-reinforced SiC composite by tape casting
217
Fabrication and mechanical properties of oriented SiC short-fiber-reinforced SiC composite by tape casting
218
Fabrication and mechanical properties of oriented SiC short-fiber-reinforced SiC composite by tape casting
219
Fabrication and mechanical properties of PLA/HA composites: A study of in vitro degradation
220
Fabrication and Mechanical Properties of Porous Co-Cr-Mo Alloy Compacts without Ni Addition
221
Fabrication and mechanical properties of porous TiB2 ceramic
222
Fabrication and mechanical properties of pressureless melt infiltrated magnesium alloy composites reinforced with TiC and Ti2AlC particles
223
Fabrication and mechanical properties of quasicrystal-reinforced AlMnMm alloys
224
Fabrication and mechanical properties of short ZrO2 fiber reinforced NiFe2O4 matrix composites
225
Fabrication and mechanical properties of SiC reinforced reaction-bonded silicon nitride based ceramics
226
Fabrication and mechanical properties of SiCw/ZK51A magnesium matrix composite by two-step squeeze casting
227
Fabrication and mechanical properties of SiCw/ZK51A magnesium matrix composite by two-step squeeze casting
228
Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites
229
Fabrication and mechanical properties of SiO2 matrix composites reinforced by carbon nanotube
230
Fabrication and mechanical properties of SiO2–Al2O3–BNNPs and SiO2–Al2O3–BNNTs composites
231
Fabrication and mechanical properties of steel–steel composites
232
Fabrication and mechanical properties of steel–steel composites
233
Fabrication and mechanical properties of ultra-fine grained γ-Ni–20Fe/Al2O3 composites
234
Fabrication and mechanical properties of WC particulate reinforced Cu47Ti33Zr11Ni6Sn2Si1 bulk metallic glass matrix composites
235
Fabrication and mechanical properties of well-dispersed multiwalled carbon nanotubes/epoxy composites
236
Fabrication and mechanical properties of β-TCP pieces by gel-casting method
237
Fabrication and mechanical property prediction of carbon nanotube reinforced Aluminum nanocomposites
238
Fabrication and mechanical testing of glass fiber entangled sandwich beams: A comparison with honeycomb and foam sandwich beams
239
Fabrication and mechanism study of CuO layers on double surfaces of polyimide substrate using surface modification
240
Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing
241
Fabrication and metallization of 3D electrospun nanofiberous architecture with gold and silver coating for applications related to electrochemical supercapacitors
242
Fabrication and microscopic characterization of a single quantum-wire laser with high uniformity
243
Fabrication and microstructural characterization of Al/Zn-enriched layers on pure magnesium
244
Fabrication and microstructural characterization of nano-structured WC/Co coatings
245
Fabrication and microstructural characterization of porous SiC membrane supports with Al2O3–Y2O3 additives
246
Fabrication and microstructural characterization of porous silicon carbide with nano-sized powders
247
Fabrication and microstructure characterization of inert matrix fuel based on yttria stabilized zirconia
248
Fabrication and microstructure characterization of selective laser‐melted FeAl intermetallic parts
249
Fabrication and microstructure investigation of ultra-high-strength porcelain insulator
250
Fabrication and microstructure of a ZrO2–Ni functionally graded bonding interlayer using the airbrush spraying method Original Research Article
251
Fabrication and microstructure of boron-doped isotropic pyrolytic carbon Original Research Article
252
Fabrication and microstructure of cerium doped lutetium aluminum garnet (Ce:LuAG) transparent ceramics by solid-state reaction method
253
Fabrication and microstructure of directionally solidified SrCe1 − xYxO3 − δ (x = 0.1, 0.2) high temperature proton conductors
254
Fabrication and microstructure of Fe3Al matrix composite reinforced by carbon nanotube
255
Fabrication and microstructure of in situ toughened Al2O3/Fe3Al
256
Fabrication and microstructure of in situ vanadium carbide ceramic particulates-reinforced iron matrix composites
257
Fabrication and microstructure of the SrTiO3 composite membranes by Sol–Gel process
258
Fabrication and microwave absorbing properties of Li0.35Zn0.3Fe2.35O4 micro-belts/nickel-coated carbon fibers composites
259
Fabrication and microwave absorption properties of magnetite nanoparticle–carbon nanotube–hollow carbon fiber composites
260
Fabrication and microwave properties of hollow nickel spheres prepared by electroless plating and template corrosion method
261
Fabrication and microwave properties of Ni hollow powders by electroless plating and template removing method
262
Fabrication and modeling of high sensitivity humidity sensors based on doped silicon nanowires
263
Fabrication and modeling of nanocomposites with bioceramic nanoparticles for rapid wound healing: An experimental and molecular dynamics investigation
264
Fabrication and Modeling of Uniform-Waist Single-Mode Tapered Optical Fiber Sensors
265
Fabrication and modification of cellulose acetate based mixed matrix membrane: Gas separation and physical properties
266
Fabrication and Morphological Characterization of Hybrid Polymeric Solar Cells Based on P3HT and Inorganic Nanocrystal Blends
267
Fabrication and morphology control of BaWO4 thin films by microwave assisted chemical bath deposition
268
Fabrication and morphology control of electrospun poly(γ-glutamic acid) nanofibers for biomedical applications
269
Fabrication and multifunctional properties of a hybrid laminate with aligned carbon nanotubes grown In Situ
270
Fabrication and nano structural study on La2O3-Co3O4-ZrO2 composite
271
Fabrication and nanoindentation properties of TiN/NiTi thin films and their applications in electrochemical sensing
272
Fabrication and nano-structure control of carbon aerogels via a microemulsion-templated sol–gel polymerization method Original Research Article
273
Fabrication and neuron cytocompatibility of iron oxide nanoparticles coated with silk-fibroin peptides
274
Fabrication and nonlinear optical properties of ultrathin films containing sulfonate functionalized fullerenes
275
Fabrication and operation of a 1 kW class anode-supported flat tubular SOFC stack
276
Fabrication and operation of a 6 kWe class interconnector-type anode-supported tubular solid oxide fuel cell stack
277
Fabrication and Operation of a Novel Membrane-less Microbial Fuel Cell as a Bioelectricity Generator
278
Fabrication and optical absorption of ordered indium oxide nanowire arrays embedded in anodic alumina membranes
279
Fabrication and optical characteristics of silicon-based two-dimensional photonic crystal Mach–Zehnder interferometers
280
Fabrication and optical characterization of a TiO2 thin film on a silica microsphere
281
Fabrication and optical characterization of electrospun poly(3-buthylthiophene) nanofibers
282
Fabrication and optical characterization of imaging fiber-based nanoarrays
283
Fabrication and optical characterization of Si nanowires formed by catalytic chemical etching in Ag2O/HF solution
284
Fabrication and optical characterization of template-constructed thin films with chiral nanostructure
285
Fabrication and optical characterization of template-constructed thin films with chiral nanostructure
286
Fabrication and Optical Characterization of Zinc Oxide Nanoparticles Prepared via a Simple Sol-gel Method
287
Fabrication and optical conductivities of strained epitaxial NaxCoO2 thin films: x=0.5, 0.7
288
Fabrication and optical properties of 3D composite photonic crystals of core–shell structures
289
Fabrication and optical properties of binary colloidal crystal monolayers consisting of micro- and nano-polystyrene spheres
290
Fabrication and optical properties of core–shell structured spherical SiO2@GdVO4:Eu3+ phosphors via sol–gel process
291
Fabrication and optical properties of Eu3+-doped ZnO nanospheres and nanorods
292
Fabrication and optical properties of GaAs/AlGaAs quantum dot grown in tetrahedral-shaped recesses on GaAs (1 1 1)B substrates by MOVPE
293
Fabrication and optical properties of highly ordered ZnO nanodot arrays
294
Fabrication and optical properties of large-scale uniform zinc oxide nanowire arrays by one-step electrochemical deposition technique
295
Fabrication and optical properties of porous InP structures
296
Fabrication and optical properties of silica shell photonic crystals
297
Fabrication and optical properties of SnS thin films by SILAR method
298
Fabrication and optical properties of transparent Nd3+:YAG nanoceramics
299
Fabrication and optical properties of Y2O3-based ceramics with broad emission bandwidth
300
Fabrication and Optical Properties Study of Poly(m-phenylene diamine)/ Sulfonated Single-walled Carbon Nanotubes Nanocomposite
301
Fabrication and optical property of single-crystalline InSb nanowire arrays
302
Fabrication and optical study of dye doped TiO2–SiO2 multilayer colloidal structures
303
Fabrication and optical waveguide of Sn-catalyzed CdSe microstructures
304
Fabrication and optimization of a fiber-optic radiation sensor for proton beam dosimetry
305
Fabrication and optimization of a fiber-optic radiation sensor for proton beam dosimetry
306
Fabrication and Optimization of Linear PEIModified Crystal Nanocellulose as an Efficient Non-Viral Vector for In-Vitro Gene Delivery
307
Fabrication and optimization of physicochemical properties of nano-phytosome from Punica granatum L. peel enriched polyphenol extract
308
Fabrication and optimization of single-junction nc-Si:H n–i–p solar cells using Si:H phase diagram concepts developed by real time spectroscopic ellipsometry
309
Fabrication and optimization of superhydrophobic ZnO-SA/PVC/PVP nanocomposite membrane distillation for highly saline RO brine recovery
310
Fabrication and opto-electric properties of ITO/ZnO bilayer films on polyethersulfone substrates by ion beam-assisted evaporation
311
Fabrication and oxidation behavior of Cr2AlC coating on Ti6242 alloy
312
Fabrication and oxidation behavior of LaB6–ZrB2 composites
313
Fabrication and oxygen permeability of gastight, macrovoid-free Ba0.5Sr0.5Co0.8Fe0.2O3−δ capillaries for high temperature gas separation
314
Fabrication and percolation behaviour of novel porous conductive polyblends of polyaniline and poly(methyl methacrylate)
315
Fabrication and Performance Analysis of a Higher Efficient Dual-Axis Automated Solar Tracker
316
Fabrication and performance characteristics of a NiC multilayer grating for hard X-rays
317
Fabrication and performance evaluation for a novel small planar passive direct methanol fuel cell stack
318
Fabrication and performance evaluation of 3-cell SOFC stack based on planar 10 cm × 10 cm anode-supported cells
319
Fabrication and performance evaluation of electrolyte-combined α-LiAlO2 matrices for molten carbonate fuel cells
320
Fabrication and performance evaluation of highly sensitive hybrid sol–gel-derived oxygen sensor films based on a fluorinated precursor Original Research Article
321
Fabrication and Performance Evaluation of Integrated Solar-Driven Membrane Distillation System with Serpentine-shape of Flat Plate Solar Collector for Seawater Desalination
322
Fabrication and performance evaluation of planar solid oxide fuel cell with large active reaction area
323
Fabrication and performance investigation of 2-2 connectivity lead-free barium zirconate titanate–Portland cement composites
324
Fabrication and performance of a carbon dioxide-tolerant proton-conducting solid oxide fuel cells with a dual-layer electrolyte
325
Fabrication and performance of a new type of charged nanofiltration membrane based on polyelectrolyte complex
326
Fabrication and performance of advanced multi-layer SOFC cathodes
327
Fabrication and performance of Al2O3/(W,Ti)C + Al2O3/TiC multilayered ceramic cutting tools
328
Fabrication and performance of an advanced ceramic tool material
329
Fabrication and performance of anode-supported solid oxide fuel cells via slurry spin coating
330
Fabrication and performance of anode-supported YSZ films by slurry spin coating
331
Fabrication and performance of Ce0.85Sm0.15O1.925–Fe2O3 electrolytes in IT-SOFCs
332
Fabrication and performance of free-standing hydrogen gas sensors
333
Fabrication and performance of functionally graded cathodes for IT-SOFCs based on doped ceria electrolytes
334
Fabrication and performance of gadolinia-doped ceria-based intermediate-temperature solid oxide fuel cells
335
Fabrication and performance of GaN electronic devices
336
Fabrication and performance of multifilamentary Nb/sub 3/Sn wires by the cable-in-tube approach
337
Fabrication and performance of Ni/3 mol% Y2O3–ZrO2 cermet anodes for solid oxide fuel cells
338
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
339
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
340
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
341
Fabrication and performance of parallel-addressed InGaN micro-LED arrays
342
Fabrication and performance of p–i–n CdTe radiation detectors
343
Fabrication and performance of p–i–n CdTe radiation detectors
344
Fabrication and performance of poly(methyl methacrylate) microfluidic chips with fiber cores
345
Fabrication and performance of polypyrrole (Ppy)/TiO2 heterojunction for room temperature operated LPG sensor
346
Fabrication and performance of Pt/C electrodes for low temperature H2/O2 fuel cells
347
FABRICATION AND PERFORMANCE STUDY OF A SOLAR MILK PASTEURIZER
348
FABRICATION AND PERFORMANCE STUDY OF SLOPE TYPE ELECTRIC CUM SOLAR OVEN
349
Fabrication and performance test of a catalyst-coated membrane from direct spray deposition
350
Fabrication and performance test of catalytic micro-combustors as a heat source of methanol steam reformer
351
Fabrication and performance test of contact-type liquid level sensor for measuring thickness variation of liquid lithium jet in the IFMIF/EVEDA lithium test loop
352
Fabrication and performance tests of a segmented p-type HPGe detector
353
Fabrication and performance tests of a segmented p-type HPGe detector
354
Fabrication and performances of an optical sensor system constructed by a novel Cu(I) complex embedded on silica matrix
355
Fabrication and performances of epoxy/multi-walled carbon nanotubes/piezoelectric ceramic composites as rigid piezo-damping materials
356
Fabrication and performances of microencapsulated paraffin composites with polymethylmethacrylate shell based on ultraviolet irradiation-initiated
357
Fabrication and performances of microencapsulated phase change materials based on n-octadecane core and resorcinol-modified melamine–formaldehyde shell
358
Fabrication and performances of new kind microencapsulated phase change material based on stearic acid core and polycarbonate shell
359
Fabrication and phase variation in annealed Cu3Se2 nanowire arrays
360
Fabrication and photoactivities of spherical-shaped BiVO4 photocatalysts through solution combustion synthesis method
361
Fabrication and photocatalysis of CuO/ZnO nano-composites via a new method
362
Fabrication and photocatalysis of mesoporous ZnWO4 with PAMAM as a template
363
Fabrication and photocatalysis of nanostructured TiO2 for solar hydrogen production
364
Fabrication and photocatalytic activities of ZnO arrays with different nanostructures
365
Fabrication and photocatalytic activity of a novel nanostructured TiO2 metal membrane Original Research Article
366
Fabrication and photocatalytic activity of electrospun nylon-6 nanofibers containing tourmaline and titanium dioxide nanoparticles
367
Fabrication and photocatalytic activity of high-efficiency visible-light-responsive photocatalyst ZnTe/TiO2 nanotube arrays
368
Fabrication and photocatalytic activity of porous TiO2 nanowire microspheres by surfactant-mediated spray drying process
369
Fabrication and photocatalytic degradation of reactive blue 19 by CuWO4, Ag3PO4, and CuWO4-Ag3PO4 composites under visible light irradiation
370
Fabrication and photocatalytic properties of free-standing TiO2 nanotube membranes with through-hole morphology
371
Fabrication and photocatalytic properties of spheres-in-spheres ZnO/ZnAl2O4 composite hollow microspheres
372
Fabrication and photochromic study of titanate nanotubes loaded with silver nanoparticles
373
Fabrication and photoelectric properties of self-assembled bilayer lipid membranes on conducting glass
374
Fabrication and photoelectrochemical characterization of CdS particles in nanospaces of expandable mica
375
Fabrication and photoelectrochemical properties of La5Ti2MS5O7 (M = Ag, Cu) electrodes
376
Fabrication and photoelectrochemical properties of porous ZnWO4 film
377
Fabrication and photoelectrochemical study of Ag@TiO2 nanoparticle thin film electrode
378
Fabrication and photoluminescence characteristics of Er3+-doped optical fiber sensitized by Si particles
379
Fabrication and photoluminescence characteristics of nonuniform Yb-Er codoped films
380
Fabrication and photoluminescence characteristics of single crystalline In2O3 nanowires
381
Fabrication and photoluminescence of GaN/sapphire submicron-scale structures with nanometre scale resolution
382
Fabrication and photoluminescence of GaN/sapphire submicron-scale structures with nanometre scale resolution
383
Fabrication and photoluminescence of molecular hybrid films based on the complexes of 8-hydroxyquinoline with different metal ions via sol–gel process
384
Fabrication and photoluminescence properties of erbium doped size-controlled silicon nanocrystals
385
Fabrication and photoluminescence properties of silicon nanowires with thin surface oxide layers
386
Fabrication and photoluminescence studies of ZnO nanocrystals dispersed in glass films
387
Fabrication and photoluminescent characteristics of one-dimensional La2O2S:Eu3+ nanocrystals
388
Fabrication and photophysical properties of singlet oxygen generating nanoporous membrane
389
Fabrication and photophysical property of Tb(III), Dy(III) and Eu(III) complex LB films containing double functional ligand of long chain mono docosyl phthalate
390
Fabrication and photovoltaic properties of Cu2ZnSnS4/i-a-Si/n-a-Si thin film solar cells
391
Fabrication and photovoltaic properties of multilayered thin films designed by layer-by-layer assembly of poly(p-phenylenevinylene)s
392
Fabrication and photovoltaic properties of self-assembled sulfonated polyaniline/TiO2 nanocomposite ultrathin films
393
Fabrication and physical properties of conductive polyacrylonitrile-polyaniline derivative fibers
394
Fabrication and physical properties of EPDM–organoclay nanocomposites
395
Fabrication and physicochemical characterization of HPMC films with commercial plant extract: Influence of light and film composition
396
Fabrication and Physicochemical Investigation of Ancient Iranian and Pakistani Treated Silver Particles and their Comparison with Silver Nanoparticles
397
Fabrication and piezoelectricity of 0–3 cement based composite with nano-PZT powder
398
Fabrication and plasma resistance properties of transparent YAG ceramics
399
Fabrication and plastic deformation of Y-TZP/alumina nanocomposite ceramics containing oxynitride glass
400
Fabrication and positive temperature coefficient of resistivity properties of semiconducting ceramics based on the BaTiO3–(Bi1/2K1/2)TiO3 system
401
Fabrication and positron annihilation spectroscopy (PAS) characterization of cellulose triacetate membranes for forward osmosis
402
Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass
403
Fabrication and preliminary evaluation of metal matrix microencapsulated fuels
404
Fabrication and preliminary testing of a planar membraneless microchannel fuel cell
405
Fabrication and preliminary testing of regular microporous membranes manufactured by deep X-ray lithography at the VEPP-3 storage ring
406
Fabrication and process parameter optimization of a 3d printer using response surface methodology
407
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
408
Fabrication and program/erase characteristics of 30-nm SONOS nonvolatile memory devices
409
Fabrication and program/erase characteristics of 30-nm SONOS nonvolatile memory devices
410
Fabrication and properties analysis of Cf–CNT/SiC composite
411
Fabrication and properties of 3-D Cf/ZrB2–ZrC–SiC composites via polymer infiltration and pyrolysis
412
Fabrication and properties of 3-D Cf/ZrC–SiC composites by the vapor silicon infiltration process
413
Fabrication and properties of 3-D Cf/ZrC–SiC composites via in-situ reaction
414
Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery
415
Fabrication and properties of a novel ZnO/Cu composite
416
Fabrication and properties of a tin–lithium alloy
417
Fabrication and properties of acid blue 25 dye-intercalated layered double hydroxides film on an anodic alumina/aluminum substrate Original Research Article
418
Fabrication and properties of aluminumquinoline/oxadiazole heterostructure luminescent layers
419
Fabrication and properties of anode-supported solid oxide fuel cell
420
Fabrication and properties of anode-supported tubular solid oxide fuel cells
421
Fabrication and properties of As-doped ZnO films grown on GaAs(0 0 1) substrates by radio frequency (rf) magnetron sputtering
422
Fabrication and properties of Bi2S3−xSex thermoelectric polycrystals
423
Fabrication and properties of borazine derived boron nitride matrix wave-transparent composites reinforced by 2.5 dimensional fabric of Si–N–O fibers
424
Fabrication and properties of CaZr0.9In0.1O3−δ prepared by an auto-ignition combustion process
425
Fabrication and properties of ceramic coatings for CTR liquid blanket by sputtering method
426
Fabrication and properties of chitin/hydroxyapatite hybrid hydrogels as scaffold nano-materials
427
Fabrication and properties of composites from BST and polypropylene-graft-poly(styrene-stat-divinylbenzene)
428
Fabrication and properties of conductive conjugated polymers/silk fibroin composite fibers
429
Fabrication and properties of continuous unidirectional Mo fiber reinforced TiAl composites by slurry casting and vacuum hot pressing
430
Fabrication and properties of cordierite–mullite bonded porous SiC ceramics
431
Fabrication and properties of cross-linked sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane
432
Fabrication and properties of dispersed carbon nanotube–aluminum composites
433
Fabrication and properties of Fe3Al–Al2O3 graded coatings
434
Fabrication and properties of film-under-gate field emission arrays with SnO2 emitters for flat lamp
435
Fabrication and properties of functionally graded dental implant
436
Fabrication and properties of graded composite rods for biomedical applications
437
Fabrication and properties of high efficiency luminescent nanorods EuPO4·H2O by soft template method
438
Fabrication and properties of high-resistivity porous silicon carbide for SiC power device passivation
439
Fabrication and properties of high-resistivity porous silicon carbide for SiC power device passivation
440
Fabrication and properties of high-strength extruded brass using elemental mixture of Cu–40% Zn alloy powder and Mg particle
441
Fabrication and properties of hybrid membranes based on salts of heteropolyacid, zirconium phosphate and polyvinyl alcohol
442
Fabrication and properties of in situ synthesized particles reinforced aluminum matrix composites of Al–Zr–O–B system
443
Fabrication and properties of injectable β-tricalcium phosphate particles/fibrin gel composite scaffolds for bone tissue engineering
444
Fabrication and properties of inverse opal photonic crystal films of La-doped bismuth titanate Original Research Article
445
Fabrication and properties of La modified AZO powders via a gaseous penetration processing
446
Fabrication and properties of laminated Al2O3/TiC composites
447
Fabrication and properties of lead-free machinable brass with Ti additive by powder metallurgy
448
Fabrication and properties of Lotus-type porous nickel-free stainless steel for biomedical applications
449
Fabrication and properties of low cost ceramic microfiltration membranes for separation of oil and bacteria from its solution
450
Fabrication and properties of machinable 3Y–ZrO2/BN nanocomposites
451
Fabrication and properties of machinable 3Y–ZrO2/BN nanocomposites
452
Fabrication and properties of macroporous tin–cobalt alloy film electrodes for lithium-ion batteries
453
Fabrication and properties of magnetic particles with nanometer dimensions
454
Fabrication and properties of mechanically alloyed and Ni activated sintered W matrix composites reinforced with Y2O3 and TiB2 particles
455
Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys
456
Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys
457
Fabrication and properties of mechanically milled alumina/aluminum nanocomposites
458
Fabrication and properties of meso-macroporous electrodes screen-printed from mesoporous titania nanoparticles for dye-sensitized solar cells
459
Fabrication and properties of microcapsules and nanocapsules containing n-octadecane
460
Fabrication and properties of microencapsulated-paraffin/gypsum-matrix building materials for thermal energy storage
461
Fabrication and properties of Mn1.56Co0.96Ni0.48O4 free-standing ultrathin chips
462
Fabrication and properties of mullite fiber matrix porous ceramics by a TBA-based gel-casting process
463
Fabrication and properties of Na0.9K0.1NbO3 nanostructures by molten salt synthesis
464
Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique
465
Fabrication and properties of novel low-melting glasses in the ternary system ZnO–Sb2O3–P2O5
466
Fabrication and Properties of Overcoated Resorcinol-Formaldehyde Shells for OMEGA Experiments
467
Fabrication and properties of piezoelectric composites designed for process monitoring of cement hydration reaction
468
Fabrication and properties of PIP 3D Cf/ZrC–SiC composites
469
Fabrication and properties of PIT Nb-Al and Nb-Sn based superconductors
470
Fabrication and properties of plasma-sprayed Al2O3/TiO2 composite coatings: A role of nano-sized TiO2 addition
471
Fabrication and properties of PLT/PLZT/PLT structures obtained by RF magnetron sputtering
472
Fabrication and properties of poly(polyethylene glycol octadecyl ether methacrylate)
473
Fabrication and properties of poly(vinyl alcohol)-based polymer electrolyte membranes for direct methanol fuel cell applications
474
Fabrication and properties of porous C/SiC composites
475
Fabrication and properties of porous mullite ceramics from calcined carbonaceous kaolin and α-Al2O3
476
Fabrication and properties of porous NiTi shape memory alloys for heavy load-bearing medical applications
477
Fabrication and properties of porous scaffold of magnesium phosphate/polycaprolactone biocomposite for bone tissue engineering
478
Fabrication and properties of porous Si3N4–SiO2 ceramics with dense surface and gradient pore distribution
479
Fabrication and properties of porous β-tricalcium phosphate ceramics prepared using a double slip-casting method using slips with different viscosities
480
Fabrication and properties of reaction-formed SiC by infiltrating molten Si into mesocarbon microbeads-based carbon preform
481
Fabrication and properties of reactively hot pressed ZrB2–SiC ceramics
482
Fabrication and properties of self-assembled films of poly(thiophene) derivatives
483
Fabrication and properties of short carbon fibers reinforced copper matrix composites
484
Fabrication and properties of SiC/mullite composite porous ceramics
485
Fabrication and properties of SiCp/Al composites by pulsed electric current sintering
486
Fabrication and properties of silver-matrix composites reinforced by carbon nanotubes
487
Fabrication and properties of supersonic plasma sprayed Al2O3 coating on porous Si3N4 substrate
488
Fabrication and properties of textured Bi-based cobaltite thermoelectric rods by zone melting
489
Fabrication and properties of the Nb doped Zr-rich lead zirconate titanate ceramics by a heterogenous precipitation method
490
Fabrication and properties of thermal insulating glass fiber reinforced composites from low temperature curable polyphosphate inorganic polymers
491
Fabrication and properties of thermal insulating glass fiber reinforced composites from low temperature curable polyphosphate inorganic polymers
492
Fabrication and properties of thin-shell monolithic piezoelectric ceramic transducers
493
Fabrication and properties of Ti(C,N) based cermets reinforced by nano-CBN particles
494
Fabrication and properties of TiC-based cermet with intra/intergranular microstructure
495
Fabrication and properties of titanium–hydroxyapatite nanocomposites
496
Fabrication and properties of transparent polymethylmethacrylate/cellulose nanocrystals composites
497
Fabrication and properties of trench-structured networked SnO2 nanowire gas sensors
498
Fabrication and properties of tricalcium phosphate/barium hexaferrite composites
499
Fabrication and properties of ultra highly porous silicon carbide by the gelation–freezing method
500
Fabrication and properties of ultrafiltration membranes composed of polysulfone and poly(1-vinylpyrrolidone) grafted silica nanoparticles
501
Fabrication and properties of vitreous silica films prepared by flame hydrolysis deposition
502
Fabrication and properties of W–20Cu alloy reinforced by titanium coated carbon fibers
503
Fabrication and properties of WC–10Co cemented carbide reinforced by multi-walled carbon nanotubes
504
Fabrication and properties of W–Cu alloy reinforced by multi-walled carbon nanotubes
505
Fabrication and properties of ZrB2–SiC–BN machinable ceramics
506
Fabrication and property of chitosan film carrying ethyl cellulose microspheres
507
Fabrication and property study of thin film transistor using rf sputtered ZnO as channel layer
508
Fabrication and purification of carbon nano onions
509
Fabrication and quantum properties of nanostructured silicon
510
Fabrication and reduction-sensitive behavior of polyion complex nano-micelles based on PEG-conjugated polymer containing disulfide bonds as a potential carrier of anti-tumor paclitaxel
511
Fabrication and reflection properties of silicon nanopillars by cesium chloride self-assembly and dry etching
512
Fabrication and release behavior of a novel freeze-gelled chitosan/γ-PGA scaffold as a carrier for rhBMP-2
513
Fabrication and residual stresses characterization of novel non-oxide multilayer ceramics
514
Fabrication and response of high concentration SIMPLE superheated droplet detectors with different liquids
515
Fabrication and Room-Temperature Single-Charging Behavior of Self-Aligned Single-Dot Memory Devices
516
Fabrication and scanning tunneling microscopy studies of the Si(1 1 1)-(√31 × √31)–In surface
517
Fabrication and scintillation properties of highly transparent Pr:LuAG ceramics using Sc,La-based isovalent sintering aids
518
Fabrication and sealing performance of rare-earth containing glass–ceramic seals for intermediate temperature solid oxide fuel cell applications
519
Fabrication and sensing behavior of PVF2 coated-polyaniline sensor for volatile organic compounds
520
Fabrication and shape-evolution of nanostructured TiO2 via a sol–solvothermal process based on benzene–water interfaces
521
Fabrication and simulation of GaSb thermophotovoltaic cells
522
Fabrication and simulation of novel ultra-thin 3D silicon detectors
523
Fabrication and simulation of novel ultra-thin 3D silicon detectors
524
Fabrication and Simulation Properties of [SiO2 - TiO2] / Silan-Cellulose Acetate Nanocomposite for Self-Clean Surfaces Applications
525
Fabrication and sintering characteristics of doctor blade YBCO-Ag tapes
526
Fabrication and soft-magnetic properties of Fe–B–Nb–Y glassy powder compacts by spark plasma sintering technique
527
Fabrication and some physical properties of AgIn5S8 thin films
528
Fabrication and some properties of textured alumina-related compounds by colloidal processing in high-magnetic field and sintering
529
Fabrication and sonocatalytic property of AgPO3 microsphere
530
Fabrication and sonocatalytic property of AgPO3 microsphere
531
Fabrication and spectroscopic properties of Langmuir–Blodgett films of novel zinc complexes with long chain mono (hexadecyl, octadecyl, eicosyl, and docosyl) phthalate
532
Fabrication and spectroscopy results of mercuric iodide Frisch collar detectors
533
Fabrication and spectroscopy results of mercuric iodide Frisch collar detectors
534
Fabrication and SPS microstructures of Ti–45Al–8.5Nb–(W,B,Y) alloying powders
535
Fabrication and stability of porous poly(allylamine) hydrochloride (PAH)/poly(acrylic acid) (PAA) multilayered films via a cleavable-polycation template
536
Fabrication and STM-characterization of novel hybrid materials of DNA/carbon nanotube
537
Fabrication and strain investigation of ZnO nanorods on Si composing sol–gel and chemical bath deposition method Original Research Article
538
Fabrication and structural analysis of aromatic polyimide ultra-thin films with different fluorine contents
539
Fabrication and structural analysis of three-dimensionally well-ordered arrangements of silicon oxycarbide microparticles
540
Fabrication and structural characterization of (Ba,Sr)TiO3 thin films produced by Electrostatic Spray Assisted Vapour Deposition
541
Fabrication and structural characterization of electro-spun polybenzimidazol-derived carbon nanofiber by graphitization
542
Fabrication and structural characterization of metal films coated on cenosphere particles by magnetron sputtering deposition
543
Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique
544
Fabrication and structural characterization of the Langmuir–Blodgett films from a new chitosan derivative containing cinnamate chromophores
545
Fabrication and structural performance of periodic cellular metal sandwich structures
546
Fabrication and structural performance of periodic cellular metal sandwich structures
547
Fabrication and structural properties of porous Cu–YSZ cermets for solid oxide fuel cells
548
Fabrication and structural, electrical characterization of i-ZnO/n-ZnO nanorod homojunctions
549
Fabrication and structure: a study of aligned carbon nanotube/carbon nanocomposites
550
Fabrication and Study of Mechanical Properties of Orange PEEL Reinforced Polymer Composite
551
Fabrication and study of photovoltaic material CuInxGa1−xSe2 bulk and thin films obtained by the technique of close-spaced vapor transport
552
Fabrication and study of pipe-gridded porous metal
553
Fabrication and study of structural, optical and electrical properties of UV curable conductive polyurethane acrylate films containing polyaniline-Co3O4 nanocomposites
554
Fabrication and study of UV-shielding and photocatalytic performance of uniform TiO2/SiO2 core-shell nanobers via single-nozzle co-electrospinning and interface sol-gel reaction
555
Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method
556
Fabrication and study on tribological characteristics of bronze–alumina–silver composite under sea water condition
557
Fabrication and study on tribological characteristics of cast copper–TiO2–boric acid hybrid composites
558
Fabrication and study the performance of solar cell made from new nanostructure phthalocyanine complex thin film
559
Fabrication and study the performance of solar cell made from new nanostructure phthalocyanine complex thin film
560
Fabrication and superhydrophobicity of fluorinated carbon fabrics with micro/nanoscaled two-tier roughness Original Research Article
561
Fabrication and superplasticity of Al2O3/3Y-TZP laminated composite
562
Fabrication and surface characterization of biomimic superhydrophobic copper surface by solution-immersion and self-assembly
563
Fabrication and Surface Characterization of Poly(4-aminodiphenylamine) Film Modified Electrode and its Application for Lead and Cadmium Determination
564
Fabrication and surface characterization of pulsed reactive closed-field unbalanced magnetron sputtered amorphous silicon nitride films
565
Fabrication and surface photovoltage study of hematite microparticles with hollow spindle-shaped structure
566
Fabrication and surface treatment of silicon mold for polymer microarray
567
Fabrication and surface-enhanced Raman scattering (SERS) of Ag/Au bimetallic films on Si substrates
568
Fabrication and sustained release properties of poly(ε-caprolactone) electrospun fibers loaded with layered double hydroxide nanoparticles intercalated with amoxicillin
569
Fabrication and synthesis of solvent-free aluminum oxide colloids by electrical explosion of wires in liquids method
570
Fabrication and synthesis of α-alumina nanopowders by thermal decomposition of ammonium aluminum carbonate hydroxide (AACH)
571
Fabrication and technological properties of nanoporous spinel/forsterite/zirconia ceramic composites
572
Fabrication and tensile behaviors of mini-C/SiC composites reinforced by Si3N4 nanowires
573
Fabrication and tensile properties of in situ TiBw and TiCp hybrid-reinforced titanium matrix composites based on Ti–B4C–C
574
Fabrication and test of a 4 kJ Bi-2223 pulse coil for SMES
575
Fabrication and test of a 70 000 channels electronic pad readout system for multi-step avalanche chambers
576
Fabrication and test of a 70 000 channels electronic pad readout system for multi-step avalanche chambers
577
Fabrication and test of a racetrack magnet using pre-reacted Nb/sub 3/Sn cable
578
Fabrication and test of a superconducting coil for SMES systems
579
Fabrication and test of radial grooved micro heat pipes
580
Fabrication and test of sol–gel based planar oxygen optodes for use in aquatic sediments
581
Fabrication and test of Superconducting Single Photon Detectors
582
Fabrication and test of Superconducting Single Photon Detectors
583
Fabrication and test of the LDX levitation coil
584
Fabrication and test of thin double-layered annulus metal hydride bed
585
Fabrication and testing of a low-cost ceramic-cup soil solution sampler
586
Fabrication and testing of a magnetically actuated micropump
587
Fabrication and testing of a miniature H2/O2 and MeOH/O2 fuel cell
588
Fabrication and testing of a planar microstructured concept module with integrated palladium membranes
589
Fabrication and testing of a SU-8 thermal flow sensor
590
Fabrication and testing of bubble powered micropumps using embedded microheater
591
Fabrication and testing of composite isogrid stiffened cylinder
592
Fabrication and testing of composite isogrid stiffened cylinder
593
Fabrication and testing of coplanar single-chamber micro solid oxide fuel cells with geometrically complex electrodes
594
Fabrication and Testing of Cuff Connections for GFRP Box Sections
595
Fabrication and Testing of Metal Foil Planar Switch
596
Fabrication and testing of nanoporous Si3N4 optical filters for gas sensing applications
597
Fabrication and testing of natural fibre composites: Vakka, sisal, bamboo and banana
598
Fabrication and testing of thin composite isogrid stiffened panel
599
Fabrication and tests of 3He and 2H targets for beam polarization measurement
600
Fabrication and tests of EF conductors for JT-60SA
601
Fabrication and the wear behaviors of the carbon/aluminum composites based on wood templates Original Research Article
602
Fabrication and their photoelectric conversion properties of two kinds of self-assembled monolayers and Langmuir–Blodgett film of mono-substituted C -malonic acid
603
Fabrication and thermal analysis of a copper/diamond/copper thermal spreading device
604
Fabrication and thermal analysis of layer-by-layer micro- and nanotubes
605
Fabrication and thermal annealing behavior of nanoscale ripple fabricated by focused ion beam
606
Fabrication and thermal conductivity of AlN/BN ceramics by spark plasma sintering
607
Fabrication and thermal conductivity of copper matrix composites reinforced with Mo2C or TiC coated graphite fibers
608
Fabrication and thermal degradation behavior of poly(vinyl chloride) particle coated with polythiophene and polyaniline
609
Fabrication and thermal degradation behavior of polystyrene nanoparticles coated with smooth polyaniline
610
Fabrication and thermal expansion properties of ZrW2O8/Zr2WP2O12 composites
611
Fabrication and thermal performance of porous crack composite wick flattened heat pipe
612
Fabrication and thermal properties of a YSZ–NiCr joint with an interlayer of YSZ–NiCr functionally graded material
613
Fabrication and thermoelectric performance of textured n-type Bi2(Te,Se)3 by spark plasma sintering
614
Fabrication and thermoelectric properties of c-axis-aligned Bi0.5Sb1.5Te3 with a high magnetic field Original Research Article
615
Fabrication and thermoelectric properties of fine-grained TiNiSn compounds
616
Fabrication and thermoelectric properties of heavily rare-earth metal-doped SrO(SrTiO3)n (n = 1, 2) ceramics
617
Fabrication and thermoelectric properties of Mg2Si1−xSnx (0 ≤ x ≤ 1.0) solid solutions by solid state reaction and spark plasma sintering
618
Fabrication and thermoelectric properties of Mg2Si-based composites using reduction reaction with additives
619
Fabrication and Thermoelectric Properties of n-Type SbI3-Doped Bi2Te2.85Se0.15 Compounds by Hot Extrusion
620
Fabrication and thermoelectric properties of p-type Bi0.5Sb1.5Te3 compounds by ingot extrusion
621
Fabrication and third-order optical nonlinearities of Na2O–B2O3–SiO2 glasses containing metallic Bi, Bi2O3 and Bi2S3 crystals
622
Fabrication and toughening of NbCr2 matrix composites alloyed with Ni obtained by powder metallurgy
623
Fabrication and transformation of dense SnO2 via laser ablation condensation Original Research Article
624
Fabrication and transport characteristics of long length Y-123 coated conductors processed by IBAD and PLD
625
Fabrication and transport mechanisms of 2-(2,3-dihydro-1,5-dimethyl-3-oxo-2-phenyl-1H-pyrazol-4-ylimino)-2-(4-nitrophenyl)acetonitrile/p-silicon hybrid solar cell
626
Fabrication and Transport Performance Characterization of Chemically-Doped Three-branch Junction Graphene Device
627
Fabrication and transport properties of 50-nm-wide AurCrrGaInAs electrode for electron wave interference device
628
Fabrication and transport properties of ex situ powder-in-tube (PIT) processed (Ba,K)Fe2As2 superconducting wires
629
Fabrication and tribological behavior of sputtering TaN coatings
630
Fabrication and tribological properties of a multiply-alkylated cyclopentane/reduced graphene oxide composite ultrathin film Original Research Article
631
Fabrication and tribological properties of Al2O3/TiC ceramic with nano-textures and WS2/Zr soft-coatings
632
Fabrication and tribological properties of B2O3 as friction reducing coatings for carbon-carbon composites
633
Fabrication and tribological properties of B2O3 as friction reducing coatings for carbon–carbon composites
634
Fabrication and tribological properties of composite coatings produced by lithographic and microbeading methods
635
Fabrication and tribological properties of polyelectrolyte multilayers containing in situ gold and silver nanoparticles
636
Fabrication and tribological properties of super-hydrophobic surfaces based on porous silicon
637
Fabrication and tribological properties of titanium nitride coatings incorporating solid lubricant microreservoirs
638
Fabrication and ultraviolet-shielding properties of silica-coated titania-doped ceria nanoparticles
639
Fabrication and upconversion luminescence of Er3+/Yb3+ codoped TeO2–WO3–Na2O–Nb2O5–Al2O3 glass fibers
640
Fabrication and Usage of a Nanocomposite Scaffold in Segmental Bone Healing: An Animal Model Study
641
Fabrication and use of hollow fiber thin film composite membranes for ethanol dehydration
642
Fabrication and vacuum annealing of transparent conductive Ga-doped Zn0.9Mg0.1O thin films prepared by pulsed laser deposition technique
643
Fabrication and Validation of Novel Fexofenadine Sensor using Alizarin Red S as Ion Exchanger on PVC Matrix for Assay in Pharmaceuticals and Spiked Human Urine Samples
644
Fabrication and Validation of Respiratory Control Belt Using Load Cell Sensor
645
Fabrication and visible-light photochromism of novel hybrid inorganic–organic film based on polyoxometalates and ethyl cellulose
646
Fabrication and voltammetric study of lanthanum 2,6-dichlorophenolindophenol chemically modified screen printed electrodes.: Application for the determination of ascorbic acid Original Research Article
647
Fabrication and wear properties of Fe3Al-based composites
648
Fabrication and wear protection performance of superhydrophobic surface on zinc
649
Fabrication and wear resistance of Al–Cu–Fe quasicrystal-epoxy composite materials
650
Fabrication and wear resistance of Al–Cu–Fe quasicrystal-epoxy composite materials
651
Fabrication approaches for the creation of physical models from microscopy data
652
Fabrication aspects of PLA-CaP/PLGA-CaP composites for orthopedic applications: A review
653
Fabrication at wafer level of miniaturized gas sensors based on SnO2 nanorods deposited by PECVD and gas sensing characteristics
654
Fabrication by electrolytic deposition of platinum black electrocatalyst for oxidation of ammonia in alkaline solution
655
Fabrication by electrolytic deposition of Pt–Ni electrocatalyst for oxidation of ammonia in alkaline solution
656
Fabrication by vacuum die casting and simulation of aluminum bipolar plates with micro-channels on both sides for proton exchange membrane (PEM) fuel cells
657
Fabrication characteristics of an anode-supported thin-film electrolyte fabricated by the tape casting method for IT-SOFC
658
Fabrication Effects on Polysilicon-based Microcantilever Piezoresistivity for Biological Sensing Application
659
Fabrication Fe3 O4 /SiO2 /TiO2 Nanocomposites and Degradation of Rhodamine B Dyes under UV Light Irradiation
660
Fabrication method and thermal conductivity assessment of molybdenum-precipitated uranium dioxide pellets
661
Fabrication method for UO2 pellets with large grains or a single grain by sintering in air
662
Fabrication method of extracting of Co(II) in water samples by synthesis MG-Chi/Fe3O4
663
Fabrication method of parallel mesoporous carbon nanotubes
664
Fabrication method of TiO2–SiO2 hybrid capsules and their UV-protective property
665
Fabrication method, microstructural characteristics, and hardness behavior of an interpenetrating phases hybrid aluminum/alumina-nanodiamond composite
666
Fabrication methods and heat treatment conditions effect on tribological properties of high speed steels
667
Fabrication methods for low-Pt-loading electrocatalysts in proton exchange membrane fuel cell systems
668
Fabrication methods of an engineered microenvironment for analysis of cell–biomaterial interactions
669
Fabrication methods of porous metals for use in orthopaedic applications
670
Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications
671
Fabrication methods to manufacture isotropic Al-Li alloys and products for space and aerospace applications
672
Fabrication nanopowders by high-energy ball-milling and low temperature sintering Li2TiO3 microwave dielectrics
673
Fabrication new PES-based mixed matrix nanocomposite membranes using polycaprolactone modified carbon nanotubes as the additive: Property changes and morphological studies Original Research Article
674
Fabrication of Macro- AND Micropore Forming DCPD/ β-TCP Porous Scaffolds: Effect of Setting-Time Reaction and Acidic Calcium Phosphate Solution
675
Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance
676
Fabrication of (Ba–Sr)Bi4Ti4O15 powders and thin films by metal organic solution routes
677
Fabrication of (beta)-Ni(OH)2 and NiO hollow spheres by a facile template-free process
678
Fabrication of (BiNa)0.5TiO3–BaTiO3 textured ceramics by tape casting
679
Fabrication of (Ca + Yb)- and (Ca + Sr)-stabilized α-SiAlON by combustion synthesis
680
Fabrication of (expandable mica)/nylon 6 composites
681
Fabrication of (polyvinyl chloride/cellulose acetate) electrodialysis heterogeneous cation exchange membrane: Characterization and performance in desalination process Original Research Article
682
Fabrication of (Th,U)O2 pellets containing 3 mol% of uranium by gel pelletisation technique
683
Fabrication of (TiB2 − TiC)p/AZ91 magnesium matrix hybrid composite
684
Fabrication of (TMTSF)2PF6 thin crystals in a confined electrode
685
Fabrication of [Fe₃O₄@SiO₂@Si-(CH₂)₃-Bipyr][ZnₓClᵧ] as a Novel Magnetic Catalyst, and Its Utility for Construction of 𝐵𝑖𝑠-Coumarins and 𝐵𝑖𝑠(Pyrazolyl)Methanes
686
Fabrication of <1 1 0> oriented tungsten nano-tips by field-assisted water etching
687
Fabrication of 0.12 mm pMOSFETs on high Ge fraction Si/Si1 xGex/Si(1 0 0) heterostructure with ultrashallow source/drain formed using B-doped SiGe CVD
688
Fabrication of 1, 1-Dimethylhydrazine Gas sensor Based
689
Fabrication of 10 mm diameter fully dense Al86Ni6Y4.5Co2La1.5 bulk metallic glass with high fracturestrength
690
Fabrication of 100 nm gate length MOSFETʹs using a novel carbon nanotube-based nano-lithography
691
Fabrication of 100nm Nano Pillars on Silicon
692
Fabrication of 15 nm curvature radius polymer tip probe on an optical fiber via two-photon polymerization and O2-plasma ashing
693
Fabrication of 184W target on carbon backing
694
Fabrication of 184W target on carbon backing
695
Fabrication of 1D nanofluidic channels on glass substrate by wet etching and room-temperature bonding Original Research Article
696
Fabrication of 2024 aluminum spun tube using a thermomechanical treatment process
697
Fabrication of 2-Chloropyridine-Functionalized Fe 3 O 4 /Amino-Silane Core–Shell Nanoparticles
698
Fabrication of 2D C/ZrC–SiC composite and its structural evolution under high-temperature treatment up to 1800 °C
699
Fabrication of 2-D photonic crystals using azo polymers
700
Fabrication of 3,4-dihydropyrimidin-2-(1H)-ones/thione compounds via Cu2V2O7 nanocatalyst synthesized by solid state method
701
Fabrication of 3.9–4.2 μm mid-infrared surface emitting PbSe/PbEuTe quantum dot lasers using molecular beam epitaxy
702
Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography
703
Fabrication of 3D carbon microstructures using glassy carbon microspheres and organic precursors
704
Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system
705
Fabrication of 3D detectors with columnar electrodes of the same doping type
706
Fabrication of 3D detectors with columnar electrodes of the same doping type
707
Fabrication of 3-D gelatin-patterned glass substrates with layer-by-layer and lift-off (LbL-LO) technology
708
Fabrication of 3-D gelatin-patterned glass substrates with layer-by-layer and lift-off (LbL-LO) technology
709
Fabrication of 3D micro-cantilevers based on MBE-grown strained semiconductor layers
710
Fabrication of 3-D microstructures with a catalytic surface composed of an ion-implanted layer
711
Fabrication of 3D photonic structure on glass materials by femtosecond laser modification with HF etching process
712
Fabrication of 5 V lithium rechargeable micro-battery
713
Fabrication of 50 nm high performance strained-SiGe pMOSFETs with selective epitaxial growth
714
Fabrication of 5052Al/Al2O3 nanoceramic particle reinforced composite via friction stir processing route
715
Fabrication of 550 nm gratings in fused silica by laser induced backside wet etching technique
716
Fabrication of 80 mm diameter-sized solid oxide fuel cells using a water-based NiO–YSZ slurry
717
Fabrication of 8-YSZ thin-wall tubes by powder extrusion moulding for SOFC electrolytes
718
Fabrication of 9,10-phenanthrenequinone/carbon nanotubes composite modified electrode and its electrocatalytic property to the reduction of iodate
719
Fabrication of 90,94Zr targets on carbon backing
720
Fabrication of 90,94Zr targets on carbon backing
721
Fabrication of 94Zr thin target for recoil distance doppler shift method of lifetime measurement
722
Fabrication of 94Zr thin target for recoil distance doppler shift method of lifetime measurement
723
FABRICATION OF A “CONE PAA NANOSTRUCTURE” BY GRADUAL DECREASE OF VOLTAGE
724
Fabrication of a Au@SnO2 core–shell structure for gaseous formaldehyde sensing at room temperature
725
Fabrication of a bilayer potentiometric phosphate biosensor by cross-link immobilization with bovine serum albumin and glutaraldehyde Original Research Article
726
Fabrication of a bimetallic Cu/Pt particle-modified carbon nanotube paste electrode and its use for the electrocatalytic oxidation of methanol
727
Fabrication of a bioengineered corneal endothelial cell sheet using chitosan/polycaprolactone blend membranes
728
Fabrication of a Capacitance-Based Tactile Sensor with Biomedical Applications
729
Fabrication of a cell array on ultrathin hydrophilic polymer gels utilising electron beam irradiation and UV excimer laser ablation
730
Fabrication of a chemically modified electrode containing 12-molybdophosphoric acid by the sol–gel technique and its application as an amperometric detector for iodate Original Research Article
731
Fabrication of a chemosensor array on a microfluidic device by a simple gel-based method
732
Fabrication of a complex InAs ring-and-dot structure by droplet epitaxy
733
Fabrication of a composite nano-ultrathin film of poly-phenylene-vinylene and C60 derivative
734
Fabrication of a composite powder and its application as an active brazing alloy
735
Fabrication of a composite system combining solid lipid nanoparticles and thermosensitive hydrogel for challenging ophthalmic drug delivery
736
Fabrication of a composite vascular scaffold using electrospinning technology
737
Fabrication of a Configurable, Single-Use Microfluidic Device
738
Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its application as a potentiometric sensor of iodide ion Original Research Article
739
Fabrication of a covalently attached multilayer film electrode containing cobalt phthalocyanine and its electrocatalytic oxidation of hydrazine
740
Fabrication of a Cranial Prosthesis Combined with an Ocular Prosthesis Using Rapid Prototyping: A Case Report
741
Fabrication of a customized impression metal jig for an implant‑supported overdenture with a milled bar
742
Fabrication of a dense La0.2Sr0.8CoO3−δ/CoO composite membrane by utilizing the electroless cobalt plating technique
743
Fabrication of a few-electron In0.56Ga0.44As vertical quantum dot with an Al2O3 gate insulator
744
Fabrication of a field effect transistor structure using charge-ordered organic materials α-(BEDT-TTF)2I3 and α′-(BEDT-TTF)2IBr2
745
Fabrication of a first wall panel by diffusion bonding
746
Fabrication of a flower-like Pd/CeO2 material with improved three-way catalytic performance
747
Fabrication of a full-size mock-up for inboard 10° section of ITER vacuum vessel thermal shield
748
Fabrication of a gecko seta-like structure using polydimethylsiloxane
749
Fabrication of a gold pattern with a nanoscale edge by using heptanethiol self-assembled monolayers and a metastable helium beam
750
Fabrication of a graphene field effect transistor array on microchannels for ethanol sensing
751
Fabrication of a graphene oxide–gold nanorod hybrid material by electrostatic self-assembly for surface-enhanced Raman scattering Original Research Article
752
Fabrication of a graphene–cuprous oxide composite
753
Fabrication of a Hard Tissue Replacement Using Natural Hydroxyapatite Derived from Bovine Bones by Thermal Decomposition Method
754
Fabrication of a He-cooled divertor module for DEMO reactor
755
Fabrication of a high hydrophobic PVDF membrane via nonsolvent induced phase separation Original Research Article
756
Fabrication of a high lithium ion conducting lithium borosilicate glass
757
Fabrication of a high strength Mg–11Gd–4.5Y–1Nd–1.5Zn–0.5Zr (wt%) alloy by thermomechanical treatments
758
Fabrication of a high-field short-period superconducting undulator
759
Fabrication of a high-field short-period superconducting undulator
760
Fabrication of a highly selective and sensitive Gd(III)-PVC membrane sensor based on N-(2-pyridyl)-N′-(4-nitrophenyl)thiourea
761
Fabrication of a highly selective cadmium (II) sensor based on 1,13-bis(8-quinolyl)-1,4,7,10,13-pentaoxatridecane as a supramolecular ionophore
762
Fabrication of a highly selective Eu(III) membrane sensor based on a new S–N hexadentates Schiffʹs base
763
Fabrication of a highly sensitive electrochemiluminescence lactate biosensor using ZnO nanoparticles decorated multiwalled carbon nanotubes
764
Fabrication of a highly sensitive sensor electrode using a nano-gapped gold particle film
765
Fabrication of a highly sensitive sumatriptan sensor based on ultrasonic-electrodeposition of Pt nanoparticles on the ZrO2 nanoparticles modified carbon paste electrode
766
Fabrication of a high-performance hip prosthetic stem using β Ti–33.6Nb–4Sn
767
Fabrication of a high-strength hydrogel with an interpenetrating network structure
768
Fabrication of a hybrid graphene/layered double hydroxide material Original Research Article
769
Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method
770
Fabrication of a large-area, flexible and color-neutral single-wall carbon nanotube:sodium dodecylbenzene sulfonate/poly-(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) transparent conductive film having a new conduction mechanism
771
Fabrication of a layered hybrid membrane using an organosilica separation layer on a porous polysulfone support, and the application to vapor permeation
772
Fabrication of a Lead All Solid State Sensor for ppb Level Monitoring of Aqueous Lead Samples
773
Fabrication of a Li4SiO4–Pb tritium breeding material
774
Fabrication of a lithium chloride solution based composite supported liquid membrane and its moisture permeation analysis
775
Fabrication of a logic gate circuit based on ambipolar field-effect transistors with thin films of C60 and pentacene
776
Fabrication of a material with composition gradient for metal/ceramic assembly
777
Fabrication of a MEMS-based separation module for liquid chromatography
778
Fabrication of a mesophase pitch-based submicron carbon-fiber web
779
Fabrication of a mesoporous Pt-carbon catalyst by the direct templating of mesoporous Pt-alumina for the methanol electro-oxidation
780
Fabrication of a methanol chemical sensor based on hydrothermally prepared α-Fe2O3 codoped SnO2 nanocubes
781
Fabrication of a microfluidic chip containing dam, weirs and gradient generator for studying cellular response to chemical modulation
782
Fabrication of a micro-optical coupling structure by laser ablation
783
Fabrication of a micro-pin array with high density and high hardness by combining mechanical peck-drilling and reverse-EDM
784
Fabrication of a model continuously graded co-electrospun mesh for regeneration of the ligament–bone interface
785
Fabrication of a molecularly imprinted polymer sensor by self-assembling monolayer/mediator system Original Research Article
786
Fabrication of a Multilayer Film Electrode Containing Quaternized Poly(4-vinylpyridine) Complexed with [Os(bpy)2CI]+/2 and Its Electrocatalytic Oxidation of L-Cysteine
787
Fabrication of a Multilayer Film Electrode Containing Quaternized Poly(4-vinylpyridine) Complexed with [Os(bpy)2CI]+/2 and Its Electrocatalytic Oxidation of L-Cysteine
788
Fabrication of a multi-layered carbon nanotube/SiC stack structure
789
Fabrication of a multi-walled carbon nanotube-deposited glass fiber air filter for the enhancement of nano and submicron aerosol particle filtration and additional antibacterial efficacy
790
Fabrication of a nano-magnet on a piezo-driven tip in a TEM sample holder
791
Fabrication of a nanophotonic quantum dot waveguide and photodetector integrated device
792
Fabrication of a Nanostructure Voltammetric Sensor for Carmoisine Analysis as a Food Dye Additive
793
Fabrication of a nanostructure-based electrochemical sensor for simultaneous determination of N-acetylcysteine and acetaminophen
794
Fabrication of a new composite orthodontic archwire and validation by a bridging micromechanics model
795
Fabrication of a new electrochemiluminescent sensor for fentanyl citrate based on glassy carbon microspheres and ionic liquid composite paste electrode Original Research Article
796
Fabrication of a new fluorescent polymeric nanoparticle containing naphthalimide and investigation on its interaction with bovine serum albumin
797
Fabrication of a new polyaniline grafted multi-wall carbon nanotube modified electrode and its application for electrochemical detection of hydrogen peroxide Original Research Article
798
Fabrication of a New Selective Optical Sensor for Cobalt Determination Using 1-Nitroso-2-naphthol and Monitoring of Cobalt in Water Samples
799
Fabrication of a New Type of Double-Shell Target Having a PVA Inner Layer
800
Fabrication of a new type of optical medium with metallic nanolayers by ion implantation technique and vacuum evaporation
801
Fabrication of a nitrided coating on a novel Ni–Cr nanocomposite with increased surface hardness
802
Fabrication of a non-cement binder using slag, palm oil fuel ash and rice husk ash with sodium hydroxide
803
Fabrication of a nonenzymatic cholesterol biosensor using carbon nanotubes from coconut oil
804
Fabrication of a novel 1,3-bis(p-hydrazonobenzoicacid)indane Langmuir–Blodgett film and organic vapor sensing properties
805
Fabrication of a novel 2D-graphene/2D-NiO nanosheet-based hybrid nanostructure and its use in highly sensitive NO2 sensors
806
Fabrication of a novel bio-adsorbent based on the yellow membrane of chicken feet for cationic dye of methylene blue removal: adsorption, equilibrium, kinetic and thermodynamic studies
807
Fabrication of a Novel Electrochemical Nanosensor for Voltammetric Determination of Naproxen
808
Fabrication of a Novel Electrochemical Sensor for Simultaneous Determination of Toxic Lead and Cadmium Ions
809
Fabrication of a novel electrochemiluminescence glucose biosensor using Au nanoparticles decorated multiwalled carbon nanotubes
810
Fabrication of a novel glucose biosensor based on Pt nanoparticles-decorated iron oxide-multiwall carbon nanotubes magnetic composite
811
Fabrication of a novel immunosensor using functionalized self-assembled monolayer for trace level detection of TNT by surface plasmon resonance
812
Fabrication of a novel impedance cell sensor based on the polystyrene/polyaniline/Au nanocomposite
813
FABRICATION OF A NOVEL MEMS CAPACITIVE MICROPHONE USING LATERAL SLOTTED DIAPHRAGM
814
Fabrication of a novel nanocomposite based on sol–gel process for hollow fiber-solid phase microextraction of aflatoxins: B1 and B2, in cereals combined with high performane liquid chromatography–diode array detection
815
Fabrication of a novel organic-inorganic hybrid nanocatalyst and its application for the synthesis of bis(pyrazolyl)methanes
816
Fabrication of a novel Pd/γ-alumina graded membrane by electroless plating on nanoporous γ-alumina
817
Fabrication of a Novel Phenolic Compound Biosensor Using Laccase Enzyme and Metal-organic Coordination Polymers
818
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
819
Fabrication of a novel scaffold of clotrimazole-microemulsion-containing nanofibers using an electrospinning process for oral candidiasis applications
820
Fabrication of a Novel Shaped Graphene/poly (Evan’s blue) Composite Chemical Sensor for the Electrocatalytic Boost up of Neurotransmitter (Dopamine): A Voltammetric Investigation
821
Fabrication of a novel temperature sensitive poly(N-isopropyl-3-butenamide) hydrogel
822
Fabrication of a novel thin-film nanocomposite (TFN) membrane containing MCM-41 silica nanoparticles (NPs) for water purification
823
Fabrication of a one-dimensional superlattice by alternative deposition of dioxime platinum complexes on KBr (100) surface
824
Fabrication of a phospholipid membrane-mimetic film on the luminal surface of an ePTFE vascular graft
825
Fabrication of a polymer microstructure by a modified DXRL process
826
Fabrication of a polymer-based biodegradable stent using a CO2 laser
827
Fabrication of a protein film by electrospray deposition method and investigation of photochemical properties by persistent spectral hole burning
828
Fabrication of a prototype humidity-sensitive capacitor via layer-by-layer self-assembling technique
829
Fabrication of a P-stabilized InP(0 0 1) surface at low pressure and temperature using t-butylphosphine (TBP)
830
Fabrication of a PVC membrane samarium(III) sensor based on N,N′,N″-tris(4-pyridyl)trimesic amide as a selectophore
831
Fabrication of a quantum dot-polymer matrix by layer-by-layer conjugation
832
Fabrication of a quantum point contact by the dynamic plowing technique and wet-chemical etching
833
Fabrication of a quantum point contact by the dynamic plowing technique and wet-chemical etching
834
Fabrication of a random convex-lens-shaped microstructure using a laser ablation
835
Fabrication of a repulsive-type magnetic bearing using a novel arrangement of permanent magnets for vertical-rotor suspension
836
Fabrication of a Reversible Protein Array Directly from Cell Lysate Using a Stimuli-Responsive Polypeptide
837
Fabrication of a room-temperature H2S gas sensor based on PPy/WO3 nanocomposite films by in-situ photopolymerization
838
Fabrication of a room-temperature NO2 gas sensor based on WO3 films and WO3/MWCNT nanocomposite films by combining polyol process with metal organic decomposition method
839
FABRICATION OF A SCREW-RETAINED HYBRID PROSTHESIS FOLLOWING TREATMENT OF PERI-IMPLANT DEFECTS: A CASE REPORT
840
Fabrication of a Selective and Sensitive Electrochemical Sensor Modified with Magnetic Molecularly Imprinted Polymer for Amoxicillin
841
Fabrication of a sensor chip containing Au and Ag electrodes and its application for sensitive Hg(II) determination using chronocoulometry Original Research Article
842
Fabrication of a short carbon fiber/gel composite that responds to a magnetic field Original Research Article
843
Fabrication of a SiC/Si/MoSi2 multi-coating on graphite materials by a two-step technique
844
Fabrication of a silica ceramic membrane using the aerosol flame deposition method for pretreatment focusing on particle control during desalination Original Research Article
845
Fabrication of a silicon based electroluminescent device
846
Fabrication of a Simple Cast-deposited Nafion/multi-walled Carbon Nanotube Composite Film as a Sensor for Voltammetric Determination of Pethidine
847
Fabrication of a single-walled carbon nanotube-modified glassy carbon electrode and its application in the electrochemical determination of epirubicin
848
Fabrication of a small animal restraint for synchrotron biomedical imaging using a rapid prototyper
849
Fabrication of a small animal restraint for synchrotron biomedical imaging using a rapid prototyper
850
Fabrication of a solid-state cell using vitamin C as sensitizer
851
Fabrication of a solution-processed IGZO/NiO p-n diode
852
Fabrication of a stable inorganic–organic hybrid multilayer film with uniform and dense inorganic nanoparticle deposition
853
Fabrication of a stable poly(vinylpyrrolidone)/poly(urushiol) multilayer ultrathin film through layer-by-layer assembly and photo-induced polymerization
854
Fabrication of a stable superhydrophobic film constructed by poly(vinylpyrrolidone)/poly(urushiol)-CuS through layer-by-layer assembly
855
Fabrication of a strain sensor for bone implant failure detection based on piezoresistive doped nanocrystalline silicon
856
Fabrication of a strained is on sub-10-nm-thick SiGe-on-insulator virtual substrate
857
Fabrication of a Sulfite Biosensor by the Use of Conducting Polymer
858
Fabrication of a superconducting MEM shunt switch for RF applications
859
Fabrication of a superhydrophobic carbon nanotube coating with good reusability and easy repairability
860
Fabrication of a superhydrophobic polypropylene membrane by deposition of a porous crystalline polypropylene coating
861
Fabrication of a superhydrophobic surface on a wood substrate
862
Fabrication of a super-hydrophobic surface on metal using laser ablation and electrodeposition
863
Fabrication of a superhydrophobic surface via spraying with polystyrene and multi-walled carbon nanotubes
864
Fabrication of a superhydrophobic ZnO nanorod array film on cotton fabrics via a wet chemical route and hydrophobic modification
865
Fabrication of a switchable nano-surface composed of acidic and basic block-polypeptides
866
Fabrication of a tantalum-clad tungsten target for KENS
867
Fabrication of a tantalum-clad tungsten target for LANSCE
868
Fabrication of a thermoplastic multilayer microfluidic chip
869
Fabrication of a thick surface layer of Al3Ti on Ti substrate by reactive-pulsed electric current sintering
870
Fabrication of a thin catalyst layer using organic solvents
871
Fabrication of a three-dimensional complex carbon nanoneedle from carbon nanowalls
872
Fabrication of a TiO2 photocatalyst by anodic oxidation of Ti in an acetic acid electrolyte
873
Fabrication of a TiO2/carbon nanowall heterojunction and its photocatalytic ability Original Research Article
874
Fabrication of a tunable glucose biosensor based on zinc oxide/chitosan-graft-poly(vinyl alcohol) core-shell nanocomposite
875
Fabrication of a versatile microanalytical system without need for clean room conditions
876
Fabrication of a versatile microanalytical system without need for clean room conditions Original Research Article
877
Fabrication of a V-groove on the optical fiber connector using a miniaturized machine tool
878
Fabrication of a working Bi-2223 superconducting magnet cooled by liquid nitrogen Original Research Article
879
Fabrication of a ZrC–SiC matrix for ceramic matrix composites and its properties
880
Fabrication of a ZrC–SiC matrix for ceramic matrix composites via in-situ reaction and its application
881
Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements
882
Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution
883
Fabrication of AA1060/Al2O3 Composites by Warm Accumulative Roll Bonding Process and Investigation of its Mechanical Properties and Microstructural Evolution
884
Fabrication of a-AlO(OH) SiO2 with core-shell structures by heterogeneous nucleation-and-growth processing
885
Fabrication of activated carbon nanoparticles from PAN precursor
886
Fabrication of activated carbon nanoparticles from PAN precursor
887
Fabrication of activated carbons with well-defined macropores derived from sulfonated poly(divinylbenzene) networks Original Research Article
888
Fabrication of adhesive superhydrophobic Ni-Cu-P alloy coatings with high mechanical strength by one step electrodeposition
889
Fabrication of advanced SiC fiber/F-CVI SiC matrix composites with SiC/C multi-layer interphase
890
Fabrication of Ag nanoclusters in single-crystal MgO by high-energy ion implantation
891
Fabrication of Ag nanoparticles by γ-irradiation: Application to surface-enhanced Raman spectroscopy of fungicides
892
Fabrication of Ag nanoparticles dispersed in PVA nanowire mats by microwave irradiation and electro-spinning
893
Fabrication of Ag nanoparticles-coated macroporous SiO2 structure by using polystyrene spheres
894
Fabrication of Ag/polypyrrole coaxial nanocables through common ions adsorption effect
895
Fabrication of Ag/TiO2 nanotube array with enhanced photo-catalytic degradation of aqueous organic pollutant
896
Fabrication of Ag/Tl–Ba–Ca–CuO/CdSe nanostructure by electro-deposition technique
897
Fabrication of agar-gel microelectrodes and their application in the study of ion transfer across the agar–water ∣ 1,2-dichloroethane interface
898
Fabrication of Al alloy matrix composite reinforced with subsive-sized Al2O3 particles by the in situ displacement reaction using high-energy ball-milled powder
899
Fabrication of Al nanoparticles and their electrical properties studied by capacitance–voltage measurements
900
Fabrication of Al/A206–Al2O3 nano/micro composite by combining ball milling and stir casting technology
901
Fabrication of Al/Al2O3 composites by in-situ powder metallurgy (IPM)
902
Fabrication of Al/Al2O3/TiC hybrid composite by anodizing and accumulative roll bonding processes and investigation of its microstructure and mechanical properties
903
Fabrication of Al/Al3Fe composites by plasma synthesis method
904
Fabrication of Al/Al3Fe composites by plasma synthesis method
905
Fabrication of Al/Al3Fe composites by plasma synthesis method
906
Fabrication of Al/Al3Mg2 composite by vacuum annealing and accumulative roll-bonding process
907
Fabrication of Al/AlN composites by in situ reaction
908
Fabrication of Al/Cup composite by accumulative roll bonding process and investigation of mechanical properties
909
Fabrication of Al/MgO/C and C/MgO/InSe/C tunneling barriers for tunable negative resistance and negative capacitance applications
910
Fabrication of Al/Ni/Cu composite by accumulative roll bonding and electroplating processes and investigation of its microstructure and mechanical properties
911
Fabrication of Al–2 vol% Al2O3/SiC hybrid composite via accumulative roll bonding (ARB): An investigation of the microstructure and mechanical properties
912
Fabrication of Al2O3 nanofluid by a plasma arc nanoparticles synthesis system
913
Fabrication of Al2O3/TiB2/AlN/TiN and Al2O3/TiC/AlN composites
914
Fabrication of Al2O3–20 vol.% Al nanocomposite powders using high energy milling and their sinterability
915
Fabrication of Al2O3–Al composites by infiltration method and their characteristic
916
Fabrication of Al2O3-SiCw in situ composite through a new combustion technique
917
Fabrication of Al2O3–ZrB2 in situ composite by SHS dynamic compaction: A novel approach
918
Fabrication of Al6061 composite with high SiC particle loading by semi-solid powder processing Original Research Article
919
Fabrication of Al7075-MWCNT Composite Powder by Recycling Aluminum Alloy Chips Via High Energy Milling and Alloying
920
Fabrication of Al–7wt%Si–0.4wt%Mg/SiC nanocomposite powders and bulk nanocomposites by high energy ball milling and powder metallurgy
921
Fabrication of Al-based hybrid composites reinforced with SiC whiskers and SiC nanoparticles by squeeze casting
922
Fabrication of alginate/nanoTiO2 needle composite scaffolds for tissue engineering applications
923
Fabrication of AlGraphiteAl2O3 Surface Hybrid Nano Composite by Friction Stir Processing and Investigating The Wear and Microstructural Properties of The Composite
924
Fabrication of aligned and molecularly oriented electrospun polyacrylonitrile nanofibers and the mechanical behavior of their twisted yarns
925
Fabrication of aligned carbon nanotubes on Cu catalyst by dc plasma-enhanced catalytic decomposition
926
Fabrication of aligned ferrite nanofibers by magnetic-field-assisted electrospinning coupled with oxygen plasma treatment
927
Fabrication of aligned lamellar porous alumina using directional solidification of aqueous slurries with an applied electrostatic field
928
Fabrication of aligned microwire arrays of perylene bisimide by micromolding in capillary
929
Fabrication of alignment layer free flexible liquid crystal cells using thermal nanoimprint lithography
930
Fabrication of alignment structures for a fiber resonator by use of deep-ultraviolet lithography
931
Fabrication of all oxide transparent p–n homojunction using bipolar CuInO2 semiconducting oxide with delafossite structure
932
Fabrication of all solid-state lithium polymer secondary batteries using PEG-borate/aluminate ester as plasticizer for polymer electrolyte
933
Fabrication of all solid-state rechargeable lithium battery and its electrochemical properties
934
Fabrication of all YBaCuO trilayer Josephson junctions with YBaCuO wiring layer
935
Fabrication of AlLi and Al2Li3/Al4Li9 intermetallic compounds by molten salt electrolysis and their application for hydrogen generation from water
936
Fabrication of Al–LiAlO2 metal matrix composites and crystalline γ-LiAlO2
937
Fabrication of alloys and superlattices based on ZnO towards ultraviolet laser
938
Fabrication of alloys and superlattices based on ZnO towards ultraviolet laser
939
Fabrication of all-solid-state battery using Li5La3Ta2O12 ceramic electrolyte
940
Fabrication of all-solid-state electrochemical microcapacitors
941
Fabrication of all-solid-state thin-film secondary cells using hexacyanometallate-based electrode materials
942
Fabrication of alumina ceramics from powders made by sol–gel type hydrolysis in microemulsions
943
Fabrication of alumina nanofibers by precipitation reaction combined with heterogeneous azeotropic distillation process
944
Fabrication of alumina parts by electrophoretic deposition from ethanol and aqueous suspensions
945
Fabrication of alumina/zirconia functionally graded material: From optimization of processing parameters to phenomenological constitutive models
946
Fabrication of alumina-based ceramic foams utilizing superplasticity
947
Fabrication of aluminium foams from powder by hot extrusion and foaming
948
Fabrication of Aluminum 5083/SiC Surface Composite on Tungsten Inert Gas Weld Joint by Novel Direct Friction Stir Processing Technique
949
Fabrication of aluminum carbide nanowires by a nano-template reaction Original Research Article
950
Fabrication of aluminum foam stabilized by copper-coated carbon fibers
951
Fabrication of Aluminum Rectangular Twist Waveguides: Experimental Investigation and FEM Simulation
952
Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics
953
Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics
954
Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics
955
Fabrication of Aluminum/Gr Composites and Investigation of its Tribological and Wear Properties
956
Fabrication of aluminum–alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing
957
Fabrication of aluminum–carbon nanotube composites and their electrical properties Original Research Article
958
Fabrication of AMCs by spray forming: Setting of cognition and social parameters to accelerate the convergence in optimization of spray forming process
959
Fabrication of AMoO4 (A = Ba, Sr) film on Mo substrate by solution reaction assisted ball-rotation
960
Fabrication of amorphous iron-boron films by electroless plating
961
Fabrication of amorphous pharmaceutical materials by electrospraying into reduced pressure
962
Fabrication of amorphous silicon carbide films using VHF-PECVD for triple-junction thin-film solar cell applications
963
Fabrication of amorphous silicon films for arrayed waveguide grating application
964
Fabrication of Amorphous Silicon Microgap Structure for Energy Saving Devices
965
Fabrication of amorphous silicon nanocones by bias-enhanced microwave plasma CVD
966
Fabrication of amperometric xanthine biosensors based on direct chemistry of xanthine oxidase
967
Fabrication of AMS-02 microstrip detectors at ITC-irst
968
Fabrication of AMS-02 microstrip detectors at ITC-irst
969
Fabrication of an alpha particle counter: spin coated films of synthesized nanocrystalline cadmium tungstate powder
970
Fabrication of an aluminum, Caribbean-style, musical pan: Metallurgical and acoustical characterization
971
Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles
972
Fabrication of an amperometric ascorbate biosensor using egg shell membrane bound Lagenaria siceraria fruit ascorbate oxidase
973
Fabrication of an Amperometric Glucose Biosensor Based on a Prussian Blue/Carbon Nanotube/Ionic Liquid Modified Glassy Carbon Electrode
974
Fabrication of an annealable platinum (111) single crystal ultramicroelectrode
975
Fabrication of an anode-supported yttria-stabilized zirconia thin film for solid-oxide fuel cells via wet powder spraying
976
Fabrication of an asymmetric hollow particle with a thermo-sensitive PNIPAM inside corona
977
Fabrication of an asymmetric polyimide hollow fiber with a defect-free surface skin layer
978
Fabrication of an eco-friendly composite nanogenerator for self-powered photosensor applications
979
Fabrication of an Eficient Antioxidant Capacity Assay Using Peroxidase-mimicking Trivalent DNAzyme
980
Fabrication of an electrically conductive mixed self-assembled monolayer and its application in an electrochemical immunosensor
981
Fabrication of an electrically conductive mixed self-assembled monolayer and its application in an electrochemical immunosensor
982
Fabrication of an electrochemical cell based on Rhodamine B Dye for low power applications
983
Fabrication of an Electrochemical Immunosensor for Determination of Human Chorionic Gonadotropin Based on PtNPs/Cysteamine/AgNPs as an Efficient Interface
984
Fabrication of an electrochemical immunosensor with self-assembled peptide nanotubes
985
Fabrication of an Electrochemical Sensor Based on a New Nano-ion Imprinted Polymer for Highly Selective and Sensitive Determination of Molybdate
986
Fabrication of an electrochemical sensor based on computationally designed molecularly imprinted polymers for determination of cyanazine in food samples Original Research Article
987
Fabrication of an Implant-Supported Orbital Prosthesis with Bar-Magnetic Attachment: A Clinical Report
988
Fabrication of an integrated microfluidic device based on a heat-sensitive poly(N-isopropylacrylamide) polymer and micromachining protocols for programmed bio-molecular patterning
989
Fabrication of an integrated optical Mach–Zehnder interferometer based on refractive index modification of polymethylmethacrylate by krypton fluoride excimer laser radiation
990
Fabrication of an integrated ΔE-E-silicon detector by wafer bonding using cobalt disilicide
991
Fabrication of an integrated ΔE-E-silicon detector by wafer bonding using cobalt disilicide
992
Fabrication of an intelligent superhydrophobic surface based on ZnO nanorod arrays with switchable adhesion property
993
Fabrication of an iron(III) PVC-membrane sensor based on bis-benzilthiocarbohydrazide as a selective sensing material
994
Fabrication of an Isoqrid fan Containment case
995
Fabrication of an Isoqrid fan Containment case
996
Fabrication of an ITER middle-scaled shielding blanket module mock-up
997
Fabrication of an optically transparent super-hydrophobic surface via embedding nano-silica
998
Fabrication of an optimized fluorescer encapsulated polymer coated gelatin nanoparticle and study of its retarded release properties
999
Fabrication of an organic light-emitting diode (OLED) from a two-dimensional lead(II) coordination polymer
1000
Fabrication of an organic thin-film transistor by direct deposit of a pentacene layer onto a silicon substrate Original Research Article