بر اساس عنوان

1
Polyelectrolyte multilayers as stationary phases for open tubular ion chromatography
2
Polyelectrolyte multilayers functionalized by a synthetic analogue of an anti-inflammatory peptide, α-MSH, for coating a tracheal prosthesis
3
Polyelectrolyte multilayers on magnetic silica as a new sorbent for the separation of trace copper in food samples and determination by flame atomic absorption spectrometry
4
Polyelectrolyte Multilayers on Magnetic Silica as a New Sorbent for the Separation of Trace Silver in the Leaching Solutions of Antibacterial Products and Determination by Flame Atomic Absorption Spectrometry
5
Polyelectrolyte nanoparticles based on water-soluble chitosan–poly(l-aspartic acid)–polyethylene glycol for controlled protein release Original Research Article
6
Polyelectrolyte platform for sensitive detection of biological analytes via reversible fluorescence quenching
7
Polyelectrolyte polymer properties in relation to male contraceptive RISUG® action
8
Polyelectrolyte screening effects on the dissolution of whey protein gels at high pH conditions
9
Polyelectrolyte self-assembled thin films containing cyclo-tetrachromotropylene for chemical and bio-sensing
10
Polyelectrolyte solutions with multivalent salts
11
Polyelectrolyte stabilized oxidase based biosensors: effect of diethylaminoethyl-dextran on the stabilization of glucose and lactate oxidases into porous conductive carbon Original Research Article
12
Polyelectrolyte templated polyaniline—film morphology and conductivity
13
Polyelectrolyte titrations of synthetic mineral microparticle suspensions to evaluate charge characteristics
14
POLYELECTROLYTE TREATMENT - AN APPROACH FOR WATER QUALITY IMPROVEMENT
15
POLYELECTROLYTE TREATMENT - AN APPROACH FOR WATER QUALITY IMPROVEMENT
16
Polyelectrolyte uptake by PEMs: Impacts of molecular weight and counterion
17
Polyelectrolyte/fluorinated polymer interpenetrating polymer networks as fuel cell membrane
18
Polyelectrolyte/nanoparticle hybrid films on anisometric colloids studied by electro-optics
19
Polyelectrolyte/silver nanocomposite multilayer films as multifunctional thin film platforms for remote activated protein and drug delivery
20
Polyelectrolyte/surfactant mixtures at the air–solution interface
21
Polyelectrolyte-assisted one-step hydrothermal synthesis of Ag-reduced graphene oxide composite and its antibacterial properties
22
Polyelectrolyte-Coated Ion Exchangers for Cell-Resistant Expanded Bed Adsorption
23
Polyelectrolyte-coated liposomes: Stabilization of the interfacial complexes
24
Polyelectrolyte-complex nanostructured fibrous scaffolds for tissue engineering
25
Polyelectrolyte-functionalized multiwalled carbon nanotubes: preparation, characterization and layer-by-layer self-assembly
26
Polyelectrolyte-grafted microfiltration membranes to control fouling by natural organic matter in drinking water
27
Polyelectrolyte-lipid complexes as membrane mimetic systems
28
Polyelectrolyte–liposome complexes: An equilibrium cluster phase close to the isoelectric condition
29
Polyelectrolyte-mediated non-micellar synthesis of monodispersed ‘aggregates’ of gold nanoparticles using a microwave approach
30
Polyelectrolyte-mediated surface interactions
31
Polyelectrolyte-modified microemulsions as new templates for the formation of nanoparticles
32
Polyelectrolyte–protein complexes
33
Polyelectrolytes
34
Polyelectrolytes
35
Polyelectrolytes
36
Polyelectrolytes — Formation, Characterisation and Application
37
Polyelectrolytes (year 2)
38
Polyelectrolytes as adhesion modifiers
39
Polyelectrolytes for cell encapsulation
40
Polyelectrolytes in thin liquid films
41
Polyelectrolyte-stabilized biosensors based on macroporous carbon electrode Original Research Article
42
Polyelectrolyte-stabilized glucose biosensor based on woodceramics as electrode
43
Polyelectrolyte-supported lipid membranes
44
Polyelectrolyte–surfactant complexes (synthesis, structure and materials aspects)
45
Polyelectrolyte–surfactant complexes: an aqueous titration method to model ion-pairing within polymeric membranes of polyion-sensitive electrodes Original Research Article
46
Polyelectrolytic aqueous guar gum for adsorptive separation of soluble Pb(II) from contaminated water
47
Polyembryony ‘paradox’: the case of cyclostomate Bryozoa
48
Polyembryony in plants: a weapon in the war over offspring numbers?
49
Polyene cyclizations to indole diterpenes. The first synthesis of (+)-emindole SA using a biomimetic approach
50
Polyene films prepared by poly(ethylene glycol)s-catalyzed dehydrochlorination of poly(vinyl chloride): chemical and electrochemical properties
51
Polyene substrates with unusual methylation patterns to probe the active sites of three catalytic antibodies Original Research Article
52
Polyenes and vision Review Article
53
Polyenes with maximum HOMO–LUMO gap
54
Polyenic spirobenzopyrans: Synthesis and study of photochromic properties
55
Polyenoic fatty acid isomerase from the marine alga Ptilota filicina: protein characterization and functional expression of the cloned cDNA
56
Polyenylphosphatidylcholine attenuates non-alcoholic hepatic fibrosis and accelerates its regression
57
Polyenylphosphatidylcholine prevents carbon tetrachloride-induced lipid peroxidation while it attenuates liver fibrosis
58
Polyepoxide-based nanohybrid films with self-assembled linear assemblies of nanodiamonds Original Research Article
59
Polyester based-siloxane modified waterborne anticorrosive hydrophobic coating on copper
60
Polyester composite based on betelnut fibre for tribological applications
61
Polyester dimethacrylate oligomers and networks
62
Polyester monomers lack ability to bind and activate both androgenic and estrogenic receptors as determined by In Vitro and In Silico methods
63
Polyester polymer concrete: Effect of the marble particle sizes and high gamma radiation doses
64
Polyester synthesis in aqueous miniemulsion
65
Polyester textile functionalisation through incorporation of pH/thermo-responsive microgels. Part I: Microgel preparation and characterisation
66
Polyester vascular prostheses coated with a cyclodextrin polymer and activated with antibiotics: Cytotoxicity and microbiological evaluation
67
Polyester/Kota Stone Dust Composite: A Comprehensive Investigation of Mechanical and Sliding Wear Properties
68
Polyester/SiO2 Nanocomposites: Gas Permeation, Mechanical, Thermal and Morphological Study of Membranes
69
Polyesterimide composites as a sensor material for sliding bearings
70
Polyesters based on diacid monomers
71
Polyesters based on unsaturated diols
72
Polyesters bearing furan moieties: IV. Solution and interfacial polycondensation of 2,2′-bis(5-chloroformyl-2-furyl)propane with various diols and bisphenols
73
Polyesterurethane foam scaffold for smooth muscle cell tissue engineering
74
Polyethene with pendant fullerene moieties
75
Polyether based amphiphiles for delivery of active components
76
Polyether based side-chain liquid crystalline polymers: Anionic polymerization and phase structures
77
Polyether containing N-[6-(N-carbazolyl)hexyl]carbazol-3-yl side chains and its model compound as components of organic light emitting diodes
78
Polyether Hexadentate Schiff Base Ligand with Trivalent Chromium, Iron, Cobalt Ions
79
Poly-ether modified siloxanes as electrolyte additives for rechargeable lithium cells
80
Polyether phosphine oxide induced phase separable homogeneous catalysis for hydroformylation of higher olefins
81
Polyether phosphite for hydroformylation of higher olefins in non-aqueous system and catalyst recovery
82
Polyether Sulfone-Graphene Oxide- Polyvinyl Pyrrolidone Nanocomposite Adsorptive Membrane for Arsenic Removal from Wastewater
83
Polyetheramine–polyhedral oligomeric silsesquioxane organic–inorganic hybrid membranes for CO2/H2 and CO2/N2 separation
84
Polyether-based polyrotaxane synthesis with controlled β-cyclodextrin threading ratio
85
Polyether-bridged bis(tert-butyl nitroxide) paramagnetic hosts showing receptor ability to calcium(II) and barium(II) ions
86
Polyethercarbonate–silica nanocomposites synthesized by copolymerization of allyl glycidyl ether with CO2 followed by sol–gel process
87
Polyetheretherketone as a biomaterial for spinal applications
88
Polyetheretherketone—cytotoxicity and mutagenicity in vitro
89
Polyetherimide composites with gamma irradiated carbon fabric: Studies on abrasive wear
90
Polyetherimide membrane formation by the cononsolvent system and its biocompatibility of MG63 cell line
91
Polyetherketones for fuel cell application Original Research Article
92
Polyether–polyester diblock copolymers for the preparation of paclitaxel loaded polymeric micelle formulations
93
Polyethers containing 2-phenylindol-1-yl moieties as host materials for light emitting diodes
94
Poly-ethers from Winogradskyella poriferorum: Antifouling potential, time-course study of production and natural abundance
95
Polyethers with phosphate pendant groups by monomer activated anionic ring opening polymerization: Syntheses, characterization and their lithium-ion conductivities
96
Polyethersulfone (PES) hollow fiber ultrafiltration membranes prepared by PES/non-solvent/NMP solution
97
Polyethersulfone (PES)/cellulose acetate phthalate (CAP) blend ultrafiltration membranes: Preparation, morphology, performance and antifouling properties
98
Polyethersulfone (PES)–silver composite UF membrane: Effect of silver loading and PVP molecular weight on membrane morphology and antibacterial activity Original Research Article
99
Polyethersulfone containing sulfonimide groups as proton exchange membrane fuel cells
100
Polyethersulfone electrospun nanofibrous composite membrane for liquid filtration
101
Polyethersulfone membrane biohybrid system using pig hepatocytes: Effect of diclofenac on cell biotransformation and synthetic functions
102
Polyethersulfone solid-phase microextraction followed by liquid chromatography quadrupole time-of-flight mass spectrometry for benzotriazoles determination in water samples
103
Polyethersulfone sulfonated by chlorosulfonic acid and its membrane characteristics
104
Polyethersulfone/HFO Mixed Matrix Membrane for Enhanced Oily Wastewater Rejection
105
Polyethersulfone/poly (butylene succinate) membrane: Effect of preparation conditions on properties and performance
106
Polyethersulfone/Polyvinyl Alcohol-Zeolite Conjugate Electrospinning for Biomedical Applications
107
Polyethersulfone-expanded graphite nanocomposites: Charge transport and impedance characteristics
108
Polyethism in the Case of Feeding, Construction, and Defense Behaviors of Odontotermes formo sanus Shiraki
109
Polyethyl substituted weakly coordinating carborane anions: a sequential dehydrogenative borylation–hydrogenation route
110
Polyethylene {201} crystal surface: interface stresses and thermodynamics
111
Polyethylene and poly(ethylene-co-1-octadecene) composites with TiO2 based nanoparticles by metallocenic “in situ” polymerization
112
Polyethylene and Polyamide Covers Containing Silver Nanoparticles in Reduction of the Mince Microbial Load
113
Polyethylene and polypropylene nanocomposites based on polymerically-modified clay containing alkylstyrene units
114
Polyethylene and polypropylene nanocomposites based upon an oligomerically modified clay
115
Polyethylene compounds with antimicrobial surface properties
116
Polyethylene crosslinking and water treeing
117
Polyethylene Cross-linking by Two-step Silane Method: A Review
118
Polyethylene Degradation by Fungal Consortium
119
Polyethylene glycol (PEG) as an efficient recyclable medium for the synthesis of β-amino sulfides
120
Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage
121
Polyethylene glycol (PEG-200)-promoted sustainable one-pot three-component synthesis of 3-indole derivatives in water Original Research Article
122
Polyethylene glycol (PEG-400) as an efficient and recyclable reaction medium for one-pot synthesis of polysubstituted pyrroles under catalyst-free conditions
123
Polyethylene glycol (PEG-400): a mild and efficient reaction medium for one-pot synthesis of 3-hydroxy-3-(pyridin-2-ylmethyl)indolin-2-ones
124
Polyethylene glycol (PEG-400): an efficient and recyclable reaction medium for the synthesis of pyrazolo[3,4-b]quinoline derivatives
125
Polyethylene glycol (PEG-400): an efficient green reaction medium for the synthesis of benzo[4,5]imidazo[1,2-a]-pyrimido[4,5-d]pyrimidin-4(1H)-ones under catalyst-free conditions
126
Polyethylene glycol 4000 attenuates adhesion formation in rats by suppression of peritoneal inflammation and collagen incorporation
127
Polyethylene Glycol Adsorption Equilibrium on Activated Carbon
128
Polyethylene Glycol and Lactulose versus Lactulose Alone in the Treatment of Hepatic Encephalopathy in Patients with Cirrhosis: A Non-Inferiority Randomized Controlled Trial
129
Polyethylene glycol as a novel solvent for extraction of crude polysaccharides from pericarpium granati
130
Polyethylene glycol as a spacer for solid-phase enzyme immobilization
131
Polyethylene glycol assisted micellar, interfacial and phase separation studies of triblock copolymer–nonionic surfactant mixtures
132
Polyethylene glycol based-aqueous biphasic systems as technetium-99m generators
133
Polyethylene Glycol Coated NiFe2O4 Nanoparticles Produced by Solution Plasma Method for Biomedical Applications
134
Polyethylene glycol cross-linked sulfonated polyethersulfone based filtration membranes with improved antifouling tendency
135
Polyethylene glycol diacrylate-based supermacroporous monolithic cryogel as high-performance liquid chromatography stationary phase for protein and polymeric nanoparticle separation
136
Polyethylene glycol embedded tribromide as an efficient and reusable catalyst for the library synthesis of nitrogen containing heterocycles
137
Polyethylene glycol grafting and attachment of encapsulated magnetic iron oxide silica nanoparticles onto chlorosilanized single-wall carbon nanotubes Original Research Article
138
Polyethylene glycol improves phenol removal by immobilized turnip peroxidase
139
Polyethylene glycol increases purification and recovery, alters retention behavior in flow-through chromatography of hemoglobin
140
Polyethylene glycol inhibits intestinal neoplasia and induces epithelial apoptosis in Apcmin mice
141
Polyethylene glycol modified magnetic carbon nanotubes as nanosorbents for the determination of methylprednisolone in rat plasma by high performance liquid chromatography
142
Polyethylene glycol modified polyethylenimine for improved CNS gene transfer: effects of PEGylation extent
143
Polyethylene glycol penetration into clay films: real time experiments
144
Polyethylene glycol reduces inflammation and aberrant crypt foci in carcinogen-initiated rats
145
Polyethylene glycol versus sodium phosphate mechanical bowel preparation in elective colorectal surgery
146
Polyethylene glycol, used to alleviate the negative effects of dietary tannins, can also serve as a marker of fecal output in goats
147
Polyethylene glycol, used to alleviate the negative effects of dietary tannins, can also serve as a marker of fecal output in goats
148
Polyethylene glycol-assisted hydrothermal growth of magnetite nanowires: Synthesis and magnetic properties
149
Polyethylene glycol-based homologated ligands for nicotinic acetylcholine receptors Original Research Article
150
polyethylene glycol-based method for extraction of extracellular vesicles from Lactobacillus casei as vaccine delivery vehicle
151
Polyethylene Glycol-Based New Solution Route to Relaxor Ferroelectric 0.65Pb(Mg1/3Nb2/ 3)O3-0.35PbTiO3
152
Polyethylene glycol-bis (N-methylimidazolium) dihydroxide as an efficient and recyclable basic phase-transfer catalyst for the synthesis of 4H-pyran derivatives in aqueous media
153
Polyethylene glycol-coated solid-phase microextraction fibres for the extraction of polar analytes—A review
154
Polyethylene glycol-containing polyurethane hydrogel coatings for improving the biocompatibility of neural electrodes
155
Polyethylene Glycol-Graphene Oxide Modified with Mesalazine; Synthesis, Characterization, and In-Vitro Drug Releasing Investigation
156
Polyethylene Glycol-Mediated Exosome Isolation: A Method for Exosomal RNA Analysis
157
Polyethylene glycol-modified bilirubin oxidase improves hepatic energy charge and urinary prostaglandin levels in rats with obstructive jaundice
158
Polyethylene glycols enhance the thermostability of β-cyclodextrin glycosyltransferase from Bacillus circulans
159
Polyethylene glycol–superoxide dismutase, a conjugate in search of exploitation
160
Polyethylene imine-based receptor immobilization for label free bioassays
161
Polyethylene insert exchange for wear after total shoulder arthroplasty
162
Polyethylene ionomer-based nano-composite foams prepared by a batch process and MuCell® injection molding
163
Polyethylene like polymers. Aliphatic polyesters of dodecanedioic acid: 1. Synthesis and properties
164
Polyethylene multiwalled carbon nanotube composites
165
Polyethylene nanocomposites based on intercalation of N-alkyl amines within KTiNbO5 structure
166
Polyethylene naphthalate as an excellent candidate for ripple nanopatterning
167
Polyethylene naphthalate single-polymer-composites produced by the undercooling melt film stacking method
168
Polyethylene oxide (PEO)–ammonium sulfate ((NH4)2SO4) complexes and electrochemical cell performance
169
Polyethylene oxide surfaces of variable chain density by chemisorption of PEO-thiol on gold: Adsorption of proteins from plasma studied by radiolabelling and immunoblotting
170
Polyethylene particles of a ‘critical size’ are necessary for the induction of cytokines by macrophages in vitro
171
Polyethylene particles stimulate expression of ITAM-related molecules in peri-implant tissues and when stimulating osteoclastogenesis in vitro
172
Polyethylene reinforced with keratin fibers obtained from chicken feathers
173
Polyethylene Sulfonate: A Tight-Binding Inhibitor of 6-Phosphogluconate Dehydrogenase ofCryptococcus neoformans
174
Polyethylene synthesis using zeolite as support for metallocene catalyst
175
Polyethylene terephthalate (PET) bulk film analysis using C60 +, Au3 +, and Au+ primary ion beams
176
Polyethylene terephthalate membrane as a support for covalent immobilization of uricase and its application in serum urate determination
177
Polyethylene thermal oxidative stabilisation in carbon nanotubes based nanocomposites
178
Polyethylene wear in retrieved reverse total shoulder components
179
Polyethylene wear particle generation in vivo in an alumina medial pivot total knee prosthesis
180
Polyethylene wear particles do not induce inflammation or gelatinase (MMP-2 and MMP-9) activity in fibrous tissue interfaces of loosening total hip arthroplasties
181
Polyethylene welding by pulsed visible laser irradiation
182
Polyethylene with bimodal molecular weight distribution synthesized by 2,6-bis(imino)pyridyl complexes of Fe(II) activated with various activators
183
Polyethylene yielding behaviour: What is behind the correlation between yield stress and crystallinity?
184
Polyethylene/carbon nanotube nano hybrid shish-kebab obtained by solvent evaporation and thin-film crystallization
185
Polyethylene/Clay/Graphite Nanocomposites as Potential Materials for Preparation of Reinforced Conductive Natural Gas Transfer Pipes
186
Polyethylene/octa-(ethyl octadeca-10,13 dienoamide) silsesquioxane blends and the adhesion strength to paperboard
187
Polyethylene/palygorskite nanocomposites: Preparation by in situ polymerization and their characterization
188
Polyethylene/phospholipid polymer alloy as an alternative to poly(vinylchloride)-based materials
189
Polyethylene/starch blends with enhanced oxygen barrier and mechanical properties: Effect of granule morphology damage by solid-state shear pulverization
190
Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells
191
Polyethylene–clay hybrid nanocomposites: in situ polymerization using bifunctional organic modifiers
192
Polyethylene-co-methacrylic acid healing agents for mendable epoxy resins Original Research Article
193
Polyethyleneglycol as scaffold and solvent for reusable Csingle bondC coupling homogeneous Pd catalysts
194
Polyethyleneglycol molecular mass and polydispersivity effect on protein partitioning in aqueous two-phase systems
195
Polyethyleneglycol–pepsin interaction and its relationship with protein partitioning in aqueous two-phase systems
196
Polyethyleneimine (PEI) cross-linked P84 nanofiltration (NF) hollow fiber membranes for Pb2+ removal
197
Polyethyleneimine (PEI) functionalized ceramic monoliths as enzyme carriers: Preparation and performance
198
Polyethyleneimine as a pH sensitive film for potentiometric transducers
199
Polyethyleneimine impregnation on activated carbon: Effects of impregnation amount and molecular number on textural characteristics and metal adsorption capacities
200
Polyethyleneimine modified fluorescent carbon dots and their application in cell labeling
201
Polyethyleneimine patterns obtained by laser-transfer assisted by a Dynamic Release Layer onto Themanox soft substrates for cell adhesion study
202
Polyethyleneimine phosphate and citrate systems act like pseudo polyampholytes as a starting method to isolate pepsin
203
Polyethyleneimine precipitation versus anion exchange chromatography in fractionating recombinant β-glucuronidase from transgenic tobacco extract
204
Polyethyleneimine/poly-(γ-glutamic acid)/poly(lactide-co-glycolide) nanoparticles for loading and releasing antiretroviral drug
205
Polyethyleneimine/sodium dodecyl sulphate adsorbed silica particles and their adsorption properties
206
Polyethyleneimine-capped silver nanoclusters as a fluorescence probe for sensitive detection of hydrogen peroxide and glucose Original Research Article
207
Polyethyleneimine-coated reticulated vitreous carbon electrode with immobilized enzymes as a substrate detector Original Research Article
208
Polyethyleneimine-functionalized poly(methyl methacrylate) colloidal nanoparticles for directly coating natural rubber sheet
209
Polyethyleneimine-induced flocculation and flotation of cyanobacterium Anabaena flos-aquae for gas vesicle production
210
Polyethyleneimine-loaded bimodal porous silica as low-cost and high-capacity sorbent for CO2 capture
211
Polyethyleneimine-mediated gene delivery into human adipose derived stem cells
212
Polyethyleneimine-mediated synthesis of superparamagnetic iron oxide nanoparticles with enhanced sensitivity in T2 magnetic resonance imaging
213
Polyethyleneimine-modified super paramagnetic Fe3O4 nanoparticles: An efficient, reusable and water tolerance nanocatalyst
214
Polyethyleneimine-modified super paramagnetic Fe3O4 nanoparticles: An efficient, reusable and water tolerance nanocatalyst
215
Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties
216
Polyethylene–polystyrene grafting reaction: effects of polyethylene molecular weight
217
Polyethylenes produced with zirconocene immobilized on MAO-modified silicas
218
Polyethylenimine attached-poly(3-chloro-2-hydroxypropyl methacrylate-co-ethylene dimethacrylate) monosized-porous microspheres as a new separation medium for polar compounds
219
Polyethylenimine loaded nanoporous carbon with ultra-large pore volume for CO2 capture
220
Polyethylenimine modified biochar adsorbent for hexavalent chromium removal from the aqueous solution
221
Polyethylenimine-immobilized core–shell nanoparticles: Synthesis, characterization, and biocompatibility test
222
Polyethylenimine-modified metal oxides for fabrication of packed capillary columns for capillary electrochromatography and capillary liquid chromatography
223
Polyferric silicate sulphate (PFSiS): Preparation, characterisation and coagulation behaviour Original Research Article
224
Polyflex Expandable Stents in the Treatment of Esophageal Disease: Initial Experience
225
Polyfluorene nanowire active waveguides as sub-wavelength polarized light sources
226
Polyfluorene nanowires with pronounced axial texturing prepared by melt-assisted template wetting
227
Polyfluorenes containing 1.8-naphthalimide dye as endcapping groups
228
Polyfluorinated 2,4-diaryl-2,3-dihydro-1H-1,5-benzodiazepines: Synthesis and new rearrangement into polyfluorodihydrobenzimidazo[1,2-a]quinolines
229
Polyfluorinated arylnitramines
230
Polyfluorinated arylnitrosamines
231
Polyfluorinated chemicals in a spatially and temporally integrated food web in the Western Arctic Original Research Article
232
Polyfluorinated compounds in ambient air from ship- and land-based measurements in northern Germany
233
Polyfluorinated compounds in waste water treatment plant effluents and surface waters along the River Elbe, Germany
234
Polyfluorinated cycloalkoxyphenyl ether systems as dopants for liquid crystal display applications
235
Polyfluorinated derivatives in the tetrathiafulvalene (TTF) series
236
Polyfluorinated dibenzodioxins and dibenzofurans — synthesis, analysis, formation and toxicology
237
Polyfluorinated hexabenzyl hexaazaisowurtzitanes
238
Polyfluorinated mercaptoalcohol as a H-bond modifier of poly(2,3,4,5,6-pentafluorostyrene) (PPFS) enhancing miscibility of hydroxylated-PPFS with various acceptor polymers
239
Polyfluorinated mercury thiolates. 199Hg NMR studies and the crystal structure of [Hg(SC6H4(CF3)-2)2]
240
Polyfluorinated phosphine ligands in the room temperature Suzuki cross-coupling reactions
241
Polyfluorinated versus cationic multidentate halogen-bond donors: A direct comparison
242
Polyfluorinated–zinc(II)phthalocyanine complex immobilized on silica: A novel, highly selective and recyclable inorganic–organic hybrid catalyst for the synthesis of biologically important 1,5-benzodiazepines
243
Polyfluoro- and perfluoroalkoxyenaminones in syntheses of nitrogen containing heterocycles
244
Polyfluoroalkylated 1,3-thiazolines: synthesis from polyfluoro-2,3-epoxyalkanes
245
Polyfluoroalkylated tripyrazolylmethane ligands: Synthesis and complexes
246
Polyfluoroalkylation of 2,6-di-tert-butylphenol by 1,2-dibromotetrafluoroethane activated by sulfur dioxide
247
Polyfluoroalkylation of 2-aminothiazoles
248
Polyfluoroaromatic compounds with a NCClR group—a reactive type of polyfluoroarene
249
Polyfluoroorganotrifluoroborates and -difluoroboranes: interesting materials in fluoroorgano and fluoroorgano-element chemistry
250
Polyfunctional adducts assembled with the help of a one-pot sequence of three AdE reactions as synthetically useful intermediates. The course of the Lewis acid induced transformations of the 4,6-dialkoxy-7-arylthioheptene moiety
251
Polyfunctional film coatings for medical use
252
Polyfunctional low-capacity cation-exchange packing material for the separation of underivatized amino acids
253
Polyfunctional MDI oligomers through dendrimerization
254
Polyfunctionality of DeNOx catalysts in other pollutant abatement
255
Polyfunctionalized macrocycles demonstrate enantioselective and ditopic binding properties
256
Polyfuran conducting polymers: Synthesis, properties, and applications
257
Polyfuran, polythiophene and their blend as novel antioxidants for styrene- butadiene rubber vulcanizates
258
Polyfuran/zeolite LTA composites and adsorption properties
259
Polyfuran: electrosynthesis and electrochemical behaviour
260
Polygala cyparissias oleoresin: Comparing CO2 and classical organic solvent extractions
261
POLYGALACTURONASE (PG) PRODUCTION BY FUNGAL STRAINS USING AGRO-INDUSTRIAL BIOPRODUCT IN SOLID STATE FERMENTATION
262
POLYGALACTURONASE PRODUCED BY BOTRYTIS FABAE AS ELICITOR OF TWO FURANOACETYLENIC PHYTOALEXINS IN VICIA FABA PODS
263
Polygalacturonase Production by Aspergillus Niger Solid State Fermentation on Barley Bran and Sugar Beet Pulp Mixture
264
POLYGALACTURONASE PRODUCTION BY ASPERGILLUS NIGER: EXPRESSION IN ONION SEEDS AND POSSIBLE INVOLVEMENT IN VIRULENCE
265
Polygalacturonase Production by Aspergillus sp. in Air-Lift and Agitated Fermentor
266
Polygalacturonase: Production of pectin depolymerising enzyme from Bacillus licheniformis KIBGE IB-21
267
Polygalacturonase-inhibiting protein activity in cantaloupe fruit as a function of fruit maturation and tissue origin
268
Polygalacturonase-inhibiting proteins in defense against phytopathogenic fungi
269
Polygalacturonic Acid/endo-Polygalacturonase System: A Kinetic Study in Batch Reactors
270
Polygalacturonic acid: Another anti-ulcer polysaccharide from the medicinal plant Maytenus ilicifolia
271
Polygalacturonic acid: Another anti-ulcer polysaccharide from the medicinal plant Maytenus ilicifolia
272
Polygamma functions of negative order
273
POLYGAMY IN DIALOGUE WITH ETHICS: A CASE STUDY OF ISIALA-MBANO LOCAL GOVERNMENT AREA OF IMO STATE, NIGERIA
274
POLYGAMY IN INDONESIAN ISLAMIC FAMILY LAW
275
Polygamy in the Ottoman City of Bursa
276
Polygamy in the Perspective of Law and Islamic Rights, Philosophy, and its Valuable Principles
277
Polygamy, disrupted reproduction, and the state: Malian migrants in Paris, France
278
Poly-generating closed cathode fuel cell with carbon capture
279
Polygeneration microgrids: A viable solution in remote areas for supplying power, potable water and hydrogen as transportation fuel
280
Polygenetic development of the Mormon Mesa, NV petrocalcic horizons: Geomorphic and paleoenvironmental interpretations
281
Polygenetic nature of a rhyolitic dome and implications for hazard assessment: Cerro Pizarro volcano, Mexico
282
Polygenetic Soils of the North-Central Part of the Gangetic Plains: A Micromorphological Approach
283
Polygenetic tonalite-trondhjemite-granodiorite (TTG) magmatism in the Smartville Complex, Northern California with a note on LILE depletion in plagiogranites
284
Polygenetic Vertisols of the Purna Valley of Central India
285
Polygenic influence on plasma homocysteine: association of two prevalent mutations, the 844ins68 of cystathionine β-synthase and A2756G of methionine synthase, with lowered plasma homocysteine levels
286
Polygenic powdery mildew disease resistance in Arabidopsis thaliana: quantitative trait analysis of the accession Warschau-1
287
Polygenic Risk Scores for Subtyping of Schizophrenia
288
Polygenic virulence factors involved in pathogenesis of 1997 Hong Kong H5N1 influenza viruses in mice
289
Polyglucuronic acids: Structures, functions and degrading enzymes
290
Polyglutamate copolymers as a tissue-engineering platform: Polymer scaffold modification through aminolysis of poly(γ-benzyl-l-glutamate-co-2,2,2-γ-trichlorethyl-l-glutamate)
291
Polyglutamine aggregation behavior in vitro supports a recruitment mechanism of cytotoxicity
292
Polyglutamine coding genes in bipolar disorder: lack of association with selected candidate loci
293
Polyglutamine expansion diseases: failing to deliver
294
Polyglutamine is Not All: The Functional Role of the AXH Domain in the Ataxin-1 Protein
295
Polyglutamine-containing aggregates in neuronal intranuclear inclusion disease
296
Polyglycerol-bound phosphotriesterase enzyme model complexes for detection and hydrolysis of phosphorus species in aqueous solution
297
Polyglycerol-derived amphiphiles for single walled carbon nanotube suspension
298
POLYGLYCERYL OLEATE SURFACTANTS AND THE STRATUM CORNEUM LIPID
299
Polyglycine Modification of Glassy Carbon Electrode as a Sensor for Effective Sensing of Pyrazole Derivative and its Analytical Applications
300
Polygon Dissections and Euler, Fuss, Kirkman, and Cayley Numbers
301
Polygon dissections and some generalizations of cluster complexes
302
Polygon Dissections and Standard Young Tableaux
303
Polygon Graph Recognition
304
Polygon intersections in spherical topology: application to plate tectonics
305
Polygon pattern geomorphometry on Svalbard (Norway) and western Utopia Planitia (Mars) using high-resolution stereo remote-sensing data
306
Polygon plate-cutting with a given order
307
Polygon plate-cutting with a given order
308
Polygon scheduling Original Research Article
309
Polygon subdivision for pocket machining process planning q
310
Polygon vertex extremality and decomposition of polygons
311
Polygonal Tiling of Some Surfaces Containing Fullerene molecules
312
Polygonal and Polyhedral Contour Reconstruction in Computed Tomography
313
Polygonal approximation of closed discrete curves
314
Polygonal approximation of digital curves based on the principles of perceptual organization
315
Polygonal approximation of digital planar curves through break point suppression
316
Polygonal approximation of digital planar curves through vertex betweenness
317
Polygonal approximation of flows
318
Polygonal approximation using genetic algorithms
319
Polygonal approximation using genetic algorithms
320
Polygonal billiards: Correspondence between classical trajectories and quantum eigenstates
321
Polygonal broadcast, secret maturity, and the firing sensors
322
Polygonal chains with minimal energy
323
Polygonal cracking in coarse clastics records cold temperatures in the equatorial Fountain Formation (Pennsylvanian–Permian, Colorado)
324
Polygonal cracks in bedrock on Earth and Mars: Implications for weathering
325
POLYGONAL DESIGNS WITH BLOCK SIZE 3 AND SINGLE DISTANCE
326
Polygonal designs: some existence and non-existence results
327
Polygonal equalities and virtual degeneracy in -spaces
328
Polygonal fault systems and channel boudinage: 3D analysis of multidirectional extension in analogue sandbox experiments
329
Polygonal faulting and seal integrity in the Bonaparte Basin, Australia
330
Polygonal figures and their form spaces I. The structure of isodiastemic manifolds (manifolds of equilateral polygons)
331
Polygonal figures and their form spaces II. Angle permutations in equilateral polygons
332
Polygonal finite element method for nonlinear constitutive modeling of polycrystalline ferroelectrics
333
Polygonal finite element methods for contact-impact problems on non-conformal meshes
334
Polygonal gold nanoplates in a polymer matrix
335
Polygonal Model Fitting
336
Polygonal planforms and phyllotaxis on plants
337
Polygonal representation of digital planar curves through dominant point detection—a nonparametric algorithm
338
Polygonal ribbons in two and three dimensions
339
Polygonal shape description for recognition of partially occluded objects
340
Polygonal terrains on Mars: A contribution to their geometric and topological characterization
341
Polygonal tubular linear permanent magnet generator analysis and experimental test
342
Polygonal valuations
343
Polygonally Meshed Dipole Model Simulation of the Electrical Field Produced by the Stomach and Intestines
344
Polygonatum cyrtonema lectin induces apoptosis and autophagy in human melanoma A375 cells through a mitochondria-mediated ROS–p38–p53 pathway
345
Polygon-based aggregation of remotely sensed data for regional ecological analyses
346
Polygon-based contact resolution for superquadrics
347
Polygonization of vapor-grown carbon fibers
348
Polygons of differential equations for finding exact solutions
349
Polygons vs. clumps of discs: A numerical study of the influence of grain shape on the mechanical behaviour of granular materials
350
Polygons with inscribed circles and prescribed side lengths
351
Polygon-wise constant curvature natural element approximation of Kirchhoff plate model
352
Polygraph Arrangements
353
Polygraphic sleep criteria as predictors of successful aging: an exploratory longitudinal study
354
Polygraphic sleep measures differentiate alcoholics and stimulant abusers during short-term abstinence
355
Polygynandrous and repeated mounting behaviour in European badgers, Meles meles
356
Polygynandry and even-sexed dispersal in a population of collared pikas, Ochotona collaris
357
Polygynous male starlings allocate parental effort according to relative hatching date
358
Polygyny and deception in the pied flycatcher: can females determine male mating status?
359
Polygyny and female aggression in the pied flycatcher: a comment on Rätti et al.
360
Polygyny and female breeding failure reduce effective population size in the lekking Gunnison sage-grouse Original Research Article
361
Polygyny and female reproductive success in golden lion tamarins, Leontopithecus rosalia
362
Polygyny and sexual selection in red-winged blackbirds : by W.A. Searcy and K. Yasukama Princeton University Press, Monographs in Behavior and Ecology, 1995. $55.00/£45.00 hbk, $29.95/£24.00 pbk (xviii + 312 pages) ISBN 0 691 03686 1
363
Polygyny in the blue tit: intra- and inter-sexual conflicts
364
Polygyny in the blue tit: unbalanced sex ratio and female aggression restrict mate choice
365
Polygyny in the dusky warbler, Phylloscopus fuscatus: the importance of female qualities
366
Polygyny, maternal HIV status and child survival: Rakai, Uganda
367
Polyhalite microfabrics in an Alpine evaporite mélange: Hallstatt, Eastern Alps
368
Polyhalogenated dibenzo-p-dioxins and dibenzofurans in the exhaust air during textile processings
369
Polyhalogenated heterocyclic compounds: Part 45. Reactions of perfluoro-(4-isopropylpyridine) with oxygen, nitrogen and carbon nucleophiles
370
Polyhalogenated heterocyclic compounds: Part 46. Multifunctional heterocycles from bromofluoropyridine derivatives
371
Polyhalogenated heterocyclic compounds: Part 52. [1] Macrocycles from 3,5-dichloro-2,4,6-trifluoropyridine
372
Polyhalogenoheterocyclic compounds: Part 51. [1] Macrocycles from 4-alkoxy-tetrafluoropyridine derivatives
373
Polyhalogenoheterocyclic compounds: Part 54: [1] Suzuki reactions of 2,4,6-tribromo-3,5-difluoropyridine
374
Polyharmonic (thin-plate) splines in the analysis of composite plates
375
Polyharmonic (thin-plate) splines in the analysis of composite plates
376
Polyharmonic (thin-plate) splines in the analysis of composite plates
377
Polyhedra as domains of harmonic maps
378
Polyhedra associated with identifying codes
379
Polyhedra dominating finitely many different homotopy types
380
Polyhedra of Small Order and Their Hamiltonian Properties
381
Polyhedra with submodular support functions and their unbalanced simultaneous exchangeability Original Research Article
382
Polyhedral analysis and decompositions for capacitated plant location-type problems Original Research Article
383
Polyhedral analysis for the two-item uncapacitated lot-sizing problem with one-way substitution Original Research Article
384
Polyhedral andLagrangianapproachesforlotsizingwithproductiontimewindows and setuptimes
385
Polyhedral antimony(III) and bismuth(III) siloxanes: Synthesis, spectral studies, and structural characterization of [Sb(O3SiR)]4 and [Bi12(O3SiR)8(μ3-O)4Cl4(THF)8] (R = (2,6-iPr2C6H3)N(SiMe3))
386
Polyhedral approximation and practical convex hull algorithm for certain classes of voxel sets Original Research Article
387
Polyhedral approximations of strictly convex compacta
388
Polyhedral azadicarbaborane chemistry. The ‘converse’ synthesis of a small family of 6,9-(NHR)-bridged-arachno-5,10-dicarbadecaboranes
389
Polyhedral carbon nanofoams with minimum surface area partitions produced using silica nanofoams as templates Original Research Article
390
Polyhedral characterizations and perfection of line graphs Original Research Article
391
Polyhedral combinatorics of multi-index axial transportation problems
392
Polyhedral conditions for the nonexistence of the MLE for hierarchical log-linear models
393
Polyhedral cones and monomial blowing-ups
394
Polyhedral Contact Formation Identification for Autonomous Compliant Motion: Exact Nonlinear Bayesian Filtering.
395
Polyhedral contact formation modeling and identification for autonomous compliant motion
396
Polyhedral dicarbaborane chemistry: a convenient synthesis of the [nido-7,8-C2B9H12]− ‘dicarbollide’ anion via the Brellochs reaction
397
Polyhedral direct sums of Banach spaces, and generalized centers of finite sets
398
Polyhedral Embeddings of Cayley Graphs
399
Polyhedral fundamental domains for discrete subgroups of PSL (2, R)
400
Polyhedral graph abstractions and an approach to the Linear Hirsch Conjecture
401
Polyhedral graphs with extreme numbers of types of faces Original Research Article
402
Polyhedral graphs with restricted number of faces of the same type Original Research Article
403
Polyhedral graphs without hamiltonian cycles Original Research Article
404
Polyhedral iridaborane chemistry: Elements of the 10-vertex closo–isonido–isocloso continuum: Molecular structures of [(PPh3)2HIrB9H9(PPh3)], [(PPh3)(Ph2PC6H4)IrB9H7(PPh3)], [(PPh3)(Ph2PC6H4)HIrB9H6Cl(PPh3)], [(PPh3)(Ph2PC6H4)HIrB9H6(PPh3)2] and [(PPh3)(P
405
Polyhedral metallathiaborane chemistry: Synthesis and characterisation of metallathiaboranes based on the twelve-vertex icosahedral closo-{MSB10H10} unit, where M is Rh or Ir
406
Polyhedral methods for piecewise-linear functions I: the lambda method Original Research Article
407
Polyhedral model for self-similar grain growth Original Research Article
408
Polyhedral monadicity of n-groupoids and standardized adjunction Original Research Article
409
Polyhedral monocarbaborane chemistry. Routes to neutral, monoanionic and dianionic carbo-carbaborane rods
410
Polyhedral monocarbaborane chemistry: positional isomerism within the 10-vertex monocarbaborane cluster: synthesis and characterisation of the [2-Ph-closo-2-CB9H9]− anion
411
Polyhedral monocarbaborane chemistry: Reactions of the [6-Ph-nido-6-CB9H11]− anion with two-electron donors to yield a series of neutral arachno and closo ten-vertex monocarbaborane derivatives
412
Polyhedral monocarbaborane chemistry: The C,B-para-diphenyl monocarbadodecaborane anion [1,12-Ph2-closo-1-CB11H10]−
413
Polyhedral monocarbaborane chemistry: The closo-[PhCB7H7]− and closo-[PhCB10H10]− anions: the two missing species in the closo-[PhCBnHn]− sequence
414
Polyhedral norms on non-separable Banach spaces
415
Polyhedral object recognition by indexing
416
Polyhedral oligomeric silsequioxane–polyurethane nanocomposite microvessels for an artificial capillary bed
417
Polyhedral Oligomeric Silsesquioxane (POSS) Based Resists: Material Design Challenges and Lithographic Evaluation at 157 nm
418
Polyhedral oligomeric silsesquioxane and polyethylene nanocomposites and their physical characteristics
419
Polyhedral oligomeric silsesquioxane as a novel plasticizer for poly(vinyl chloride)
420
Polyhedral oligomeric silsesquioxane trisilanols as pigment surface modifiers for fluoropolymer based Thickness Sensitive Spectrally Selective (TSSS) paint coatings
421
Polyhedral oligomeric silsesquioxanes (POSS) thermal degradation
422
Polyhedral oligomeric silsesquioxanes as functional monomer to prepare hybrid monolithic columns for capillary electrochromatography and capillary liquid chromatography Original Research Article
423
Polyhedral oligosilsesquioxanes POSS/—building blocks for the development of nano-structured materials
424
Polyhedral perturbations that preserve topological form Original Research Article
425
Polyhedral Realizations of Crystal Bases for Integrable Highest Weight Modules
426
Polyhedral Realizations of Crystal Bases for Quantized Kac–Moody Algebras
427
Polyhedral regions of local stability for linear discrete-time systems with saturating controls
428
Polyhedral Representation and Adjacency Graph in n-dimensional Digital Images
429
Polyhedral Representation and Adjacency Graph in n-dimensional Digital Images
430
Polyhedral representation of discrete Morse functions
431
Polyhedral results and exact algorithms for the asymmetric travelling salesman problem with replenishment arcs Original Research Article
432
Polyhedral results for the bipartite induced subgraph problem Original Research Article
433
Polyhedral results for the Equitable Coloring Problem
434
Polyhedral ruthenaborane chemistry. Approaches to encapsulated boron cores. The isolation and characterisation of the partially encapsulated isocloso 10-vertex {RuB9} cluster compound [(PPh3)RuB9H9{RuCl2(PPh3)2}2]
435
Polyhedral structure of submodular and posi-modular systems Original Research Article
436
Polyhedral studies on the convex recoloring problem
437
Polyhedral Surface Modeling with a Diffusion System
438
Polyhedral truncations as eutactic transformations
439
Polyhedral vertex blending with setbacks using rational S-patches Original Research Article
440
Polyhedral yield surfaces in the element nodal force space
441
Polyhedral-based nonlinear optical materials.: Part 1. Theoretical investigation of some new high nonlinear optical response compounds involving carboranes and charged aromatic donors and acceptors
442
Polyhedrality of the Brookes–Groves invariant for the non-commutative torus
443
Polyhedrization of an arbitrary 3D point set Original Research Article
444
PolyHeme and the Ethics of Informed Consent
445
Polyherbal extract improves glycometabolic control in alloxan-induced diabetic rats via down-regulating the MAPK/JNK pathway, modulating Nrf-2/Keap-1 expression, and stimulating insulin signaling
446
Polyheterocycles containing alkene spacer linkages Part II. Synthesis and polymerization of (E)-2-styrylthiophenes and (E)-2-styrylpyrrole
447
Polyhexamethyleneguanidine phosphate induces severe lung inflammation, fibrosis, and thymic atrophy
448
Polyhexes that are graphs
449
PolyHIPE foams: Production, characterisation, and performance as aerosol filtration materials
450
PolyHIPE: IPNs, hybrids, nanoscale porosity, silica monoliths and ICP-based sensors
451
PolyHIPEs from Methyl methacrylate: Hierarchically structured microcellular polymers with exceptional mechanical properties
452
Polyhistidine–PEG:DNA nanocomposites for gene delivery
453
Polyhydramnios as a Predictor of Adverse Pregnancy Outcomes
454
Polyhydramnios. Risk factors and outcome
455
Polyhydrazides based on 2,5-bis(4-carboxymethylene phenyl)-3,4-diphenyl thiophene
456
Polyhydrazides based upon aromatic dihydrazines
457
Polyhydride complexes of rhenium with the chelating ligand 1,2-bis(diphenylphosphinite)ethane
458
Polyhydroalkanoates (PHAs) Production from Saponified Sunflower Oil in Mixed Cultures under Aerobic Condition
459
Polyhydrogenation of [60]- and [70]fullerenes with Zn/HCl and Zn/DCl
460
Polyhydroxy alkaloids: chromatographic analysis
461
Polyhydroxy Amino Acid Derivatives via β-Lactams Using Enantiospecific Approaches and Microwave Techniques
462
Polyhydroxy pregnanes from Dregea volubilis
463
Polyhydroxyacrylate–polyurethane semi-interpenetrating polymer networks
464
Polyhydroxyalkaloids in the Aroid Tribes Nephthytideae and Aglaonemateae: Phytochemical Support for an Intertribal relationship
465
Polyhydroxyalkanoate (PHA) scaffolds with good mechanical properties and biocompatibility
466
Polyhydroxyalkanoate degrading hydrolase-like activities by Pseudomonas sp. isolated from soil
467
Polyhydroxyalkanoate Polymers and Their Production in Transgenic Plants
468
Polyhydroxyalkanoate production as a side stream process on a municipal waste water treatment plant
469
Polyhydroxyalkanoate production from fermented volatile fatty acids: Effect of pH and feeding regimes
470
Polyhydroxyalkanoate production from whey by Pseudomonas hydrogenovora
471
Polyhydroxyalkanoates accumulation by Methylobacterium organophilum CZ-2 during methane degradation using citrate or propionate as cosubstrates
472
Polyhydroxyalkanoates form potentially a key aspect of aerobic phosphorus uptake in enhanced biological phosphorus removal
473
Polyhydroxyalkanoates production by a mixed photosynthetic consortium of bacteria and algae
474
Polyhydroxyalkanoates production by engineered Cupriavidus necator from waste material containing lactose
475
Polyhydroxyalkanoates: an overview
476
Polyhydroxyalkanoic Acids and Rhamnolipids Are Synthesized Sequentially in Hexadecane Fermentation by Pseudomonas aeruginosa ATCC 10145
477
Polyhydroxyalkanonate derivatives in current clinical applications and trials
478
Polyhydroxybutyrate for Improved Oil Recovery: A Literature Review
479
Polyhydroxybutyrate production by direct use of waste activated sludge in phosphorus-limited fed-batch culture
480
Polyhydroxybutyrate production from a novel feedstock derived from a wheat-based biorefinery
481
Polyhydroxybutyrate production from oil palm empty fruit bunch using Bacillus megaterium R11
482
Polyhydroxybutyrate synthesis on biodiesel wastewater using mixed microbial consortia
483
Polyhydroxybutyrate-b-polyethyleneglycol block copolymer for the solid phase extraction of lead and copper in water, baby foods, tea and coffee samples
484
Polyhydroxyethylmethacrylate-based magnetic DNA-affinity beads for anti-DNA antibody removal from systemic lupus erythematosus patient plasma
485
Polyhydroxylated 3-(N-phenyl) carbamoyl-2-iminochromene derivatives as potent inhibitors of tyrosine kinase p60c-src
486
Polyhydroxylated 4-thiaflavans as multipotent antioxidants: Protective effect on oxidative DNA damage in vitro
487
Polyhydroxylated azepanes as new motifs for DNA minor groove binding agents
488
Polyhydroxylated aziridinylcyclopentanes as glycomimetics: a new competitive inhibitor of α-mannosidase
489
Polyhydroxylated Bicyclic Ureas from Glycosyl Isocyanides
490
Polyhydroxylated indolizidine alkaloids—an efficient synthesis of 1-deoxy-8,8a-di-epi-castanospermine
491
Polyhydroxylated indolizidine alkaloids—synthesis of dideoxycastanospermine
492
Polyhydroxylated macrolide isolated from the endophytic fungus Pestalotiopsis mangiferae
493
Polyhydroxylated pyrrolidine and pyrrolizidine alkaloids from Hyacinthoides non-scripta and Scilla campanulata
494
Polyhydroxylated pyrrolidines, III. Synthesis of new protected 2,5-dideoxy-2,5-iminohexitols from d-fructose
495
Polyhydroxylated pyrrolidines: synthesis from d-fructose of new tri-orthogonally protected 2,5-dideoxy-2,5-iminohexitols
496
Polyhydroxylated pyrrolizidines. Part 6: A new and concise stereoselective synthesis of (+)-casuarine and its 6,7-diepi isomer, from DMDP
497
Polyhydroxylated steroids from the octocoral Isis hippuris
498
Polyhydroxyl-based surfactants and their physico-chemical properties and applications
499
POLYHYDROYALKANOATES: FROM BASIC RESEARCH AND MOLECULAR BIOLOGY TO APPLICATION
500
PolyI:C Upregulated CCR5 and Promoted THP-1-Derived Macrophage Chemotaxis via TLR3/JMJD1A Signalling
501
Polyimide (PI) films by chemical vapor deposition (CVD): Novel design, experiments and characterization
502
Polyimide and polyhedral oligomeric silsesquioxane nanocomposites for low-dielectric applications
503
Polyimide based neural implants with stiffness improvement
504
Polyimide blend alignment layers for control of liquid crystal pretilt angle through baking
505
Polyimide foams from powder: Experimental analysis of competitive diffusion phenomena
506
Polyimide foils as backing supports for optical filters
507
Polyimide foils as backing supports for optical filters
508
Polyimide hollow fiber gas separation membranes: preparation and the suppression of plasticization in propane/propylene environments
509
Polyimide modification by a linear aliphatic diamine to enhance transport performance and plasticization resistance
510
Polyimide nano-coating on carbon fibers by electrophoretic deposition
511
Polyimide nanocomposites prepared from high-temperature, reduced charge organoclays
512
Polyimide surface modification by linear stationary plasma thruster
513
Polyimide/montmorillonite nanocomposites based on thermally stable, rigid-rod aromatic amine modifiers
514
Polyimide/montmorillonite nanocomposites with photolithographic properties
515
Polyimide/POSS nanocomposites: interfacial interaction, thermal properties and mechanical properties
516
Polyimide/sepiolite nanocomposite films: Preparation, morphology and properties
517
Polyimide/silica hybrid-clay nanocomposites
518
Polyimide/Ta2O5 nanocomposite gate insulators for enhanced organic thin-film transistor performance
519
Polyimide–polydimethylsiloxane copolymers containing nitrile groups
520
Polyimides based on poly(2-furanmethanol-formaldehyde)
521
Polyimides containing s-triazine ring
522
Polyimides from 1,5-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic tetracarboxylic dianhydrides
523
Polyimides from 2,3,3′,4′-biphenyltetracarboxylic dianhydride and aromatic diamines
524
Polyimides with main-chain ethylene oxide units: synthesis and properties
525
Polyimides with main-chain photosensitive groups: Synthesis, characterization and their properties as liquid crystal alignment layers
526
Polyimide–silica hybrids containing novel phenylethynyl imide silanes as coupling agents for surface-treated titanium alloy
527
Polyimide–silica hybrids containing novel phenylethynyl imide silanes as coupling agents for surface-treated titanium alloy
528
Polyimide-silica nanocomposites with inter-phase bonding through γ-glycidyloxy-propyltrimethoxysilane
529
Polyimide-silica nanocomposites: spectroscopic, morphological and mechanical investigations
530
Polyimido sulphur anions S(NR) - mn: Free radicals and coordination behaviour
531
Polyindole and poly(5-cyanoindole) : electrochemical and FT-IR spectroscopic comparative studies
532
Polyindole/ carboxylated-multiwall carbon nanotube composites produced by in-situ and interfacial polymerization
533
Polyinosinic–polycytidylic acid attenuates hepatic fibrosis in C57BL/6 mice with Schistosoma japonicum infection
534
Polyion Complex Chitosan Membrane Consisting of Sodium Alginate/Chitosan for the Pervaporation Separation of Methanol/Methyl tert-butyl Ether Mixtures
535
Polyion complex micelles from plasmid DNA and poly(ethylene glycol)–poly( -lysine) block copolymer as serum-tolerable polyplex system: physicochemical properties of micelles relevant to gene transfection efficiency
536
Polyion complex stabilized palladium nanoparticles for Suzuki and Heck reaction in water
537
Polyion monolayers and halos around large weakly-charged colloids
538
Polyion–counterion interaction behavior for sodium carboxymethylcellulose in methanol–water mixed solvent media
539
Polyion–counterion interactions in sodium carboxymethylcellulose–ethylene glycol–water ternary solutions
540
Polyions act as an electrostatic glue for mesoscopic particle aggregates
541
Polyion-sensitive membrane-based electrodes for heparin-binding foldamer analysis Original Research Article
542
Polyisobutene/polycyclohexyl methacrylate interpenetrating polymer networks
543
Polyisobutene/polystyrene interpenetrating polymer networks: Effects of network formation order and composition on the IPN architecture
544
Polyisobutene–poly(methylmethacrylate) interpenetrating polymer networks: synthesis and characterization
545
Polyisobutenylsuccinimides as detergents and dispersants in fuel: infrared spectroscopy application
546
Polyisobutylene supports—a non-polar hydrocarbon analog of PEG supports
547
Polyisobutylene-based miktoarm star polymers via a combination of carbocationic and atom transfer radical polymerizations
548
Polyisobutylene-based thermoplastic polyurethanes exhibit significant phase mixing
549
Polyisobutylene-supported N-heterocyclic carbene palladium catalysts
550
Polyisoprene and high structure carbon nanoparticle composite for sensing organic solvent vapours
551
Polyisoprene and high structure carbon nanoparticle composite for sensing organic solvent vapours
552
Polyisoprene—multi-wall carbon nanotube composites for sensing strain
553
Polyisoprenoyl gemcitabine conjugates self assemble as nanoparticles, useful for cancer therapy
554
Polyisoprenylated acylphloroglucinols and a polyisoprenylated tetracyclic xanthone from the bark of Calophyllum thorelii
555
Polyisoprenylated benzophenone derivatives from Clusia obdeltifolia
556
Polyisoprenylated benzophenone derivatives from the fruits of Garcinia cambogia and their absolute configuration by quantum chemical circular dichroism calculations
557
Polyketide derivatives of endophytic fungus Pestalotiopsis sp. isolated from the Chinese mangrove plant Rhizophora mucronata
558
Polyketide origin of 3-alkylpyridines in the marine mollusc Haminoea orbignyana
559
Polyketide origin of pheromones of Carpophilus davidsoni and C. mutilatus (Coleoptera: Nitidulidae) Original Research Article
560
Polyketide Proofreading by an Acyltransferase-like Enzyme Original Research Article
561
Polyketide synthase acyl carrier protein (ACP) as a substrate and a catalyst for malonyl ACP biosynthesis Original Research Article
562
Polyketide synthesis in vitro on a modular polyketide synthase Original Research Article
563
Polyketide β-Branching in Bryostatin Biosynthesis: Identification of Surrogate Acetyl-ACP Donors for BryR, an HMG-ACP Synthase Original Research Article
564
Polyketides from the mangrove-derived endophytic fungus Acremonium strictum
565
Polyketides produced by Daldinia loculata cultured from Northern Manitoba
566
Polykis(pyrazol-1-yl)benzenes: preparation, structure, and complexation with copper and palladium
567
Polylactic Acid /High-Ratio Natural Kenaf Fiber Biocomposite Sheets Processed by Calendering Melt Mixing Technique
568
Polylactic acid fibre-reinforced polycaprolactone scaffolds for bone tissue engineering
569
Poly-lactic Acid/Gelatin Nanofiber (PLA/GTNF) Conduits Containing Platelet-Rich Plasma for Peripheral Nerve Regeneration
570
Polylactide (PLA)/layered double hydroxides composite fibers by electrospinning method Original Research Article
571
Polylactide (PLA)–CaSO4 composites toughened with low molecular weight and polymeric ester-like plasticizers and related performances
572
Polylactide (PLA)-clay nanocomposites prepared by melt compounding in the presence of a chain extender
573
Polylactide and carbon nanotubes/smectite-clay nanocomposites: Preparation, characterization, sorptive and electrical properties
574
Polylactide compositions. Part 1: Effect of filler content and size on mechanical properties of PLA/calcium sulfate composites
575
Polylactide microspheres prepared by premix membrane emulsification—Effects of solvent removal rate
576
Polylactide/montmorillonite nanocomposites: Structure, dielectric, viscoelastic and thermal properties
577
Polylactide/polyglycolide copolymer in bone defect healing in humans
578
Polylactide-based polyurethane and its shape-memory behavior
579
Polylactide-based renewable composites from natural products residues by encapsulated film bag: Characterization and biodegradability
580
Polylactide-based thermoplastic shape memory polymer nanocomposites
581
Polylactones 54: ring-opening and ring-expansion polymerizations of ϵ-caprolactone initiated by germanium alkoxides
582
Polylactosamine synthesis and branch formation of N-glycans in β1,4-galactosyltransferase-1-deficient mice
583
Polyline averaging using distance surfaces: A spatial hurricane climatology
584
Polylinear Additive Functionals of Superprocesses
585
Polylinked adamantanoid structure of Cd(SePh)2
586
Polylithiation of thioethers: a versatile route for polyanionic synthons
587
Polylithiumorganic Compounds. Part 27: C,C-Bond Forming Reactions of 3,4-Dilithio-2,5-dimethyl-2,4-hexadiene
588
Polylithiumorganic compounds. Part 29: C,C Bond cleavage of phenyl substituted and strained carbocycles using lithium metal
589
Polylithiumorganic compounds: Part 28. The reaction of allene and alkyl substituted allenes with lithium metal
590
Poly-L-lactic acid for the aesthetic correction of facial volume loss
591
Poly-l-lysine-coated albumin nanoparticles: Stability, mechanism for increasing in vitro enzymatic resilience, and siRNA release characteristics
592
Poly-l-lysine-modified reduced graphene oxide stabilizes the copper nanoparticles with higher water-solubility and long-term additively antibacterial activity
593
Poly-l-lysines and poly-l-arginines induce leakage of negatively charged phospholipid vesicles and translocate through the lipid bilayer upon electrostatic binding to the membrane Original Research Article
594
Polylog Depth Circuits for Integer Factoring and Discrete Logarithms
595
Polylysine-functionalised thermoresponsive chitosan hydrogel for neural tissue engineering
596
Polylysine–porphycene conjugates as efficient photosensitizers for the inactivation of microbial pathogens
597
PolyMAX, a Mobile WiMAX module for the ns-2 simulator with QoS and AMC support
598
Polymelamine modified edge plane pyrolytic graphite sensor for the electrochemical assay of serotonin
599
Polymelia with unhealed navel in an Iranian indigenous young fowl
600
Poly-membered macrometallacyclic complexes of silver and gold with functionalized N-Heterocyclic carbene and functionalized 2-borabicyclo[1.1.0]but-1(3)-ene ligands: A DFT study
601
Polymer (fiber)-supported palladium catalyst containing imidazolinyl rings and its application to the Heck reaction
602
Polymer 1960–2009
603
Polymer ablation: From fundamentals of polymer design to laser plasma thruster
604
Polymer action on alkali–silica reaction in cement mortar
605
Polymer activation by reducing agent absorption as a flexible tool for the creation of metal films and nanostructures by electroless plating
606
Polymer additive analysis by pyrolysis–gas chromatography: I. Plasticizers
607
Polymer additive analysis by pyrolysis–gas chromatography: II. Flame retardants
608
Polymer additive analysis by pyrolysis–gas chromatography: III. Lubricants
609
Polymer additive analysis by pyrolysis–gas chromatography: IV. Antioxidants
610
Polymer adsorption at the brine/rock interface: the role of electrostatic interactions and wettability
611
Polymer adsorption in the grafting reactions of hydroxyl terminal polymers with multi-walled carbon nanotubes
612
Polymer adsorption on the surface of highly dispersed silica
613
Polymer adsorption: its correlation with flocculation and dewatering of kaolin suspension in the presence and absence of surfactants
614
POLYMER ADSORPTION–DRIVEN SELF-ASSEMBLY OF NANOSTRUCTURES
615
Polymer and ampicillin co-precipitation by supercritical antisolvent process
616
Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area
617
Polymer- and colloid-mediated bioassays, sensors and diagnostics
618
Polymer and composite foam for hydrogen storage application
619
Polymer and Fock representations for a scalar field
620
Polymer and organic solar cells viewed as thin film technologies: What it will take for them to become a success outside academia
621
Polymer and particle adsorption at the PDMS droplet-water interface
622
Polymer and salt selection for lithium polymer batteries
623
Polymer and small molecule multi-layer light-emitting diodes
624
Polymer anion-selective membrane for electrolytic water splitting: The impact of a liquid electrolyte composition on the process parameters and long-term stability
625
Polymer architecture influence on rheology
626
Polymer as an important component of blends and composites with liquid crystals
627
Polymer assemblies for controlled delivery of bioactive molecules from surfaces
628
Polymer assisted assembling of the semiconductor particles: Structural and electrical studies
629
Polymer assisted isolation of hydroxyapatite from Thunnus obesus bone
630
Polymer atomization of iron aluminide
631
Polymer atomization of iron aluminide
632
Polymer band alignment at the interface with indium tin oxide: consequences for light emitting devices
633
Polymer based blue electrophosphorescent light emitting devices
634
Polymer Based Formulation and Immobilization Approaches in Enzymatic Detoxification of Organophosphorus Compounds: A review
635
Polymer based interfaces as bioinspired ‘smart skins’
636
Polymer based materials for solid electrolyte sensors
637
Polymer based Membrane Electrospun Fiber in Fuel Cell Application: A Short Review
638
Polymer based polarization insensitive amplitude modulator: conception, technology and demonstration
639
Polymer batteries fabricated from lithium complexed acetylated chitosan
640
Polymer batteries with chitosan electrolyte mixed with sodium perchlorate
641
Polymer batteries with chitosan electrolyte mixed with sodium perchlorate
642
Polymer biodegradation: Mechanisms and estimation techniques – A review Review Article
643
Polymer biomaterials in solution, as interfaces and as solids : S.L. Cooper, C.H. Bamford and T. Tsuruta, editors VSP Publishers, Utrecht, The Netherlands, 1995, pp. 1134
644
Polymer blend emulsion stabilization using carbon nanotubes interfacial confinement
645
Polymer blend latex films: Miscibility and polymer diffusion studied by energy transfer
646
Polymer blend membranes of sulfonated poly(arylene ether ketone) for direct methanol fuel cell
647
Polymer blend/organoclay nanocomposite with poly(ethylene oxide) and poly(methyl methacrylate)
648
Polymer blends and composites from renewable resources
649
Polymer blends and interpenetrating polymer networks at the interface with solids
650
Polymer blends based on copolymers bearing both side and main chain pyridine units as proton exchange membranes for high temperature fuel cells
651
Polymer blends based on PEO and starch: Miscibility and spherulite growth rate evaluated through DSC and optical microscopy
652
Polymer blends based on sulfonated poly(ether ketone ketone) and poly(ether sulfone) as proton exchange membranes for fuel cells
653
Polymer blends based on the β-modification of polypropylene
654
Polymer blends of SPEEK for DMFC application at intermediate temperatures
655
Polymer blends of sPS/PA6 compatibilized by sulfonated syndiotactic polystyrene
656
Polymer blends; stretching what we can learn through the combination of experiment and theory
657
Polymer Bonded Anisotropic Thick Hard Films for Micromotors/Microgenerators Original Research Article
658
Polymer bound iminodicarbonate: a new ammonia equivalent for solid-phase synthesis of primary amines
659
Polymer bound iminodicarbonate: a new ammonia equivalent for solid-phase synthesis of primary amines
660
Polymer bound iminodicarbonate: a new ammonia equivalent for solid-phase synthesis of primary amines
661
Polymer bristles: a SANS study
662
Polymer bromide-DMSO: novel reagent system for the oxidation of alcohols to carbonyl compounds
663
Polymer brush coatings regulating cell behavior: Passive interfaces turn into active
664
Polymer brush with pendent glucosylurea groups constructed on a glass substrate by RAFT polymerization
665
Polymer brushes as active nanolayers for tunable bacteria adhesion
666
Polymer brushes: surface-immobilized macromolecules
667
Polymer brushes––surface immobilized polymers
668
Polymer bulk heterojunction photovoltaic devices based on complex donors and solution-processable functionalized graphene oxide
669
Polymer carriers for drug delivery in tissue engineering
670
POLYMER celebrates its 50th birthday in March 2010
671
Polymer cement plaster to prevent radon gas contamination within concrete building structures
672
Polymer chain collapse near the lower critical solution temperature
673
Polymer chain conformation in the phase separation process of a binary liquid mixture
674
Polymer chain conformation of copolymers with different monomer size: 13C NMR spectroscopy and MALS study
675
Polymer chain diffusion and Li+ hopping of poly(ethylene oxide)/LiAsF6 crystalline polymer electrolytes as studied by solid state NMR and ac impedance
676
Polymer chain dynamics under nanoscopic confinements
677
Polymer chain orientations in KC60 and RbC60: structural analysis and relation with electronic properties
678
Polymer chain pinning at interfaces in CaCO3–SBR latex composites
679
Polymer chain scission, oligomer production and diffusion: A two-scale model for degradation of bioresorbable polyesters
680
Polymer chains and baryons in a strongly coupled quark–gluon plasma Original Research Article
681
Polymer chains in good solvent facing impenetrable walls: what is the distance to the wall in lattice Monte Carlo simulations
682
Polymer chains in semidilute solutions confined to a square channel: mean-field Gaussian chain theory and comparison with simulation results
683
Polymer characterization by laser desorption with multiphoton ionization of end-group chromophores
684
Polymer characterization by size-exclusion chromatography with multiple detection
685
Polymer charge-transfer complexes for opto-electronic applications
686
Polymer chip incorporated with anionic surfactant-ISFET for microflow analysis of anionic surfactants
687
Polymer class specificity of the glass temperature
688
Polymer coat protects cells: Nanomedicine
689
Polymer coated QCM sensor with modified electrode for the detection of DDVP
690
Polymer coated QCM sensor with modified electrode for the detection of DDVP
691
Polymer coated quartz crystal microbalance sensors for detection of volatile organic compounds in gas mixtures Original Research Article
692
Polymer coated sensor array based on quartz crystal microbalance for chemical agent analysis
693
Polymer coated vermiculite–iron composites: Novel floatable magnetic adsorbents for water spilled contaminants
694
Polymer coating method developed for carbon stripper foils
695
Polymer coating method developed for carbon stripper foils
696
Polymer coating/encapsulation of nanoparticles using a supercritical anti-solvent process
697
Polymer coatings for biomedical applications using atmospheric pressure plasma
698
Polymer coatings to functionalize carbon nanotubes
699
Polymer colloids, conducting polymers and block co-polymers
700
Polymer compatibility with refrigeration lubricants
701
Polymer compatibility with refrigeration lubricants
702
Polymer complexes XXXIV. Potentiometric and thermodynamic studies of monomeric and polymeric complexes containing 2-acrylamidosulphadiazine
703
Polymer complexes. LIV. Structural and spectral studies of supramolecular coordination polymers built from Ni(II), Fe(II) and Pd(II) with sulphadrug
704
Polymer complexes. LVII. Supramolecular assemblies of novel polymer complexes of dioxouranium(VI) with some substituted allyl azo dye compounds
705
Polymer complexes. XLXI. Supramolecular spectral studies on metal–ligand bonding of novel rhodanine sulphadrugs hydrazone
706
Polymer composite biomaterials from polyethylene/poly(vinyl acetate) prepared in supercritical carbon dioxide and their bulk and surface characterization
707
Polymer composite-based OFET sensor with improved sensitivity towards nitro based explosive vapors
708
Polymer composites with the dielectric constant comparable to that of barium titanate ceramics
709
Polymer concentration dependence of the dynamics in gel electrolytes
710
Polymer concentration dependence of the gel point for chemically modified biopolymer networks using small amplitude oscillatory rheometry
711
Polymer concentration, shear and stretch field effects on the surface morphology evolution during the spin-coating
712
Polymer concrete composites for enhancement of mobility of troops in desert operations
713
Polymer concrete with recycled PET: The influence of the addition of industrial waste on flammability
714
Polymer concrete-filled steel tubes under axial compression
715
Polymer concrete–GRP plate hybrid joints for transverse moment–shear continuity in GRP bridge decks
716
Polymer conformation in mixed aqueous-polar organic solvents
717
Polymer conformation-assisted wrapping of single-walled carbon nanotube: The impact of cis-vinylene linkage
718
Polymer conjugates for cancer therapy
719
Polymer conjugates: nanosized medicines for treating cancer
720
Polymer cover induced self-excited vibrations of nipped rolls
721
Polymer crosslinking controlled by release of catalyst encapsulated in polycarbonate micro-spheres
722
Polymer crystallization from the metastable melt: The formation mechanism of spherulites
723
Polymer degradation initiated via infectious behavior
724
Polymer degradation studies using laser pyrolysis-FTIR microanalysis
725
Polymer degradation studies using laser pyrolysis-FTIR microanalysis
726
Polymer depletion interaction between a particle and a wall
727
Polymer depressants at the talc–water interface: adsorption isotherm, microflotation and electrokinetic studies
728
Polymer derived ceramic microparts from X-ray lithography—cross-linking behavior and process optimization
729
Polymer derived Si–C–B–N ceramics via hydroboration from borazine derivatives and trivinylcyclotrisilazane
730
Polymer design for high temperature shape memory: Low crosslink density polyimides
731
Polymer diffraction gratings on stimuli-responsive hydrogel surfaces: Soft-lithographic fabrication and optical sensing properties
732
Polymer diodes using poly(3,4-dicyanothiophene)
733
Polymer diodes with a blend of MEH-PPV and conjugated polyquinoline
734
Polymer dispersed liquid crystal films for modulating infra-red radiation
735
Polymer dispersed liquid crystals: effects of photorefractivity and local heating on holographic recording Original Research Article
736
Polymer dispersions and their interaction with mortar constituents and ceramic tile surfaces studied by zeta-potential measurements and atomic force microscopy
737
Polymer displacement/shielding in protein chromatography
738
Polymer dots for quantifying the total hydrophobic pathogenic lysates in a single drop
739
Polymer drying, 11: Desorption studies using poly-(Styrene-co-divinylbenzene) samples that had been swelled to saturation in chloromethanes
740
Polymer drying, 12: kinetic evidence for synergistic interaction between polymer relaxation and desorption from polystyrene in a glassy state
741
Polymer durability estimates based on apparent activation energies for thermal oxidative degradation
742
Polymer dynamics applied to PEEK matrix composite welding
743
Polymer dynamics in chaotic flows with a strong shear component
744
Polymer dynamics of DOC networks and gel formation in seawater
745
Polymer effects on the equimolar mixed cationic–anionic surfactants
746
Polymer electrodes doped with heteropolymetallates and their use within solid-state supercapacitors
747
Polymer electroluminescence in the near infra-red
748
Polymer electroluminescent diodes with microcylindrical geometry
749
Polymer electrolyte for lithium batteries based on photochemically crosslinked poly(ethylene oxide) and ionic liquid
750
Polymer electrolyte fuel cell mini power unit for portable application
751
Polymer electrolyte fuel cell stack research and development
752
Polymer electrolyte fuel cell stack thermal model to evaluate sub-freezing startup
753
Polymer electrolyte fuel cells based on bimetallic carbon nitride electrocatalysts
754
Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranes
755
Polymer electrolyte fuel cells employing electrodes with gas-diffusion layers of mesoporous carbon derived from a sol–gel route Original Research Article
756
Polymer electrolyte hybrid membranes prepared by radiation grafting of p-styryltrimethoxysilane into poly(ethylene-co-tetrafluoroethylene) films
757
Polymer electrolyte membrane based on 2-acrylamido-2-methyl propanesulfonic acid fabricated by embedded polymerization
758
Polymer electrolyte membrane fuel cell contamination: Testing and diagnosis of toluene-induced cathode degradation
759
Polymer electrolyte membrane fuel cells for communication applications
760
Polymer electrolyte membrane resistance model
761
Polymer electrolyte membrane water electrolyser with Aquivion® short side chain perfluorosulfonic acid ionomer binder in catalyst layers
762
Polymer electrolyte membrane with high selectivity ratio for direct methanol fuel cells: A preliminary study based on blends of partially sulfonated polymers polyaniline and PVdF-co-HFP
763
Polymer electrolyte membranes derived from modified poly(phthalazinone ether ketone) for fuel cell applications
764
Polymer electrolyte membranes derived from novel fluorine-containing poly(arylene ether ketone)s by controlled post-sulfonation
765
Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Membrane structure and transport properties
766
Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Microdomain orientation by external field
767
Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Structural evolution with hydration and heating
768
Polymer electrolyte plasticized with PEG-borate ester having high ionic conductivity and thermal stability
769
Polymer electrolyte system based on (PEO+KBrO3) — its application as an electrochemical cell
770
Polymer electrolyte-graphene composites: Conductivity peaks and reasons thereof
771
Polymer electrolytes and polyelectrolytes: Monte Carlo simulations of thermal effects on conduction
772
Polymer electrolytes and the electric vehicle
773
Polymer electrolytes as humidity sensors: progress in improving an impedance device
774
Polymer electrolytes based on a ternary miscible blend of poly(ethylene oxide), poly(bisphenol A-co-epichlorohydrin) and poly(vinyl ethyl ether)
775
Polymer electrolytes based on acrylonitrile–butyl acrylate copolymers and lithium bis(trifluoromethanesulfone)imide
776
Polymer electrolytes based on an electrospun poly(vinylidene fluoride-co-hexafluoropropylene) membrane for lithium batteries
777
Polymer electrolytes based on blends of poly(ether urethane) and polysiloxanes
778
Polymer electrolytes based on copolymer of poly(ethylene glycol) dimethacrylate and imidazolium ionic liquid
779
Polymer electrolytes based on cross-linked cyclotriphosphazenes
780
Polymer electrolytes based on cross-linked linear poly(ethylenimine) hydrochloride/phosphoric acid systems
781
Polymer electrolytes based on ethylene oxide–epichlorohydrin copolymers
782
Polymer electrolytes based on hyperbranched polymer with cross-linkable groups at the terminals
783
Polymer electrolytes based on hyperbranched polymers
784
Polymer electrolytes based on modified natural rubber
785
Polymer electrolytes based on modified natural rubber for use in rechargeable lithium batteries
786
Polymer electrolytes based on new aryl-containing lithium perfluorosulfonates
787
Polymer electrolytes based on PEO and aluminum carboxylates
788
Polymer electrolytes based on poly(ethyleye oxide) and cross-linked poly(ethylene oxide-co-propylene oxide)
789
Polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) nanofibrous membranes containing polymer plasticizers for lithium batteries
790
Polymer electrolytes based on poly(vinylidene fluoride-co-hexafluoropropylene) with crosslinked poly(ethylene glycol) for lithium batteries
791
Polymer electrolytes based on sulfonated polysulfone for direct methanol fuel cells
792
Polymer electrolytes based on the doped comb-branched copolymers for Li-ion batteries
793
Polymer electrolytes composed of lithium tetrakis(pentafluorobenzenethiolato) borate and poly(fluoroalkylcarbon)s
794
Polymer electrolytes confined in nanopores: using water as a means to explore the interfacial impedance at the nanoscale
795
Polymer electrolytes containing ionic liquids with acidic counteranion (DMRImH2PO4, R = ethyl, butyl and octyl)
796
Polymer electrolytes derived from dendritic polyether macromonomers
797
Polymer electrolytes derived from polynorbornenes with pendent cyclophosphazenes: poly(ethylene glycol) methyl ether (PEGME) derivatives
798
Polymer electrolytes for a hydrogen economy
799
Polymer electrolytes for dye-sensitized solar cells prepared by photopolymerization of PEG-based oligomers
800
Polymer electrolytes having a dendrimer structure
801
Polymer electro-optic devices for integrated optics Original Research Article
802
Polymer encapsulation of surface-modified carbon blacks using surfactant-free emulsion polymerisation
803
Polymer Enhanced Fusion of Model Sperm Membranes as Induced by Calcium
804
Polymer entanglement – A barrier to nanoparticles aggregation
805
POLYMER enters its 50th year of publication
806
Polymer equations of state derived from molecular simulation
807
Polymer evolution of a sulfonated polysulfone membrane as a function of ion beam irradiation fluence
808
Polymer FET with a conducting channel
809
Polymer field effect transistors fabricated by dewetting
810
Polymer field-theory simulations on graphics processing units Original Research Article
811
Polymer film dynamics using X-ray photon correlation spectroscopy
812
Polymer film rupturing in comparison with leveling and dewetting
813
Polymer film sensor for sampling and remote analysis of polycyclic aromatic hydrocarbons in clear and turbid aqueous environments
814
Polymer film sensor for sampling and remote analysis of polycyclic aromatic hydrocarbons in clear and turbid aqueous environments Original Research Article
815
Polymer films as permselective coatings for H2O2-sensing electrodes
816
Polymer films filled with organic molecules by CO2 laser evaporation in vacuum
817
Polymer films in the normal-liquid and supercooled state: a review of recent Monte Carlo simulation results
818
Polymer films on electrodes: Part 29. Electropolymerized poly(7,14-diphenylacenaphtho[1,2-k]fluoranthene): electrochemistry and conductance of a novel electrochromic hydrocarbon ladder polymer film
819
Polymer Films Possessing Nanoreinforcements via Organically Modified Layered Silicate
820
Polymer films releasing nisin and/or natamycin from polyvinyldichloride lacquer coating: Nisin and natamycin migration, efficiency in cheese packaging Original Research Article
821
Polymer films with surfaces unmodified and modified by non-thermal plasma as new substrates for cell adhesion
822
Polymer flooding design and optimization under economic uncertainty
823
Polymer foams for personal protection: cushions, shoes and helmets
824
Polymer foams for personal protection: cushions, shoes and helmets
825
Polymer formation utilizing ‘crisscross’ addition (crisscross addition polymerization) of acetaldehyde azine and 1,4-phenylene diisocyanate
826
Polymer fractionation using chromatographic column packed with novel regenerated cellulose beads modified with silane
827
Polymer fracture forms nano-grooves: Nanofabrication
828
Polymer fume fever after use of a household product
829
Polymer gear surface thermal wear and its performance prediction
830
Polymer gel dosimetry using computed tomography
831
Polymer gel dosimetry using computed tomography
832
Polymer gel electrolyte
833
Polymer gel electrolyte supported with microporous polyolefin membranes for lithium ion polymer battery
834
Polymer Gel Electrolytes Based on 49% Methyl-Grafted Natural Rubber
835
Polymer gel electrolytes prepared by thermal curing of poly(vinylidene fluoride)–hexafluoropropene/poly(ethylene glycol)/propylene carbonate/lithium perchlorate blends
836
Polymer gel electrolytes synthesized by photopolymerization in the presence of star-shaped oligo(ethylene glycol) ethers (OEGE)
837
Polymer genomics: An insight into pharmacology and toxicology of nanomedicines
838
Polymer geometry and Li+ conduction in poly(ethylene oxide)
839
Polymer grade transition control using advanced real-time optimization software
840
Polymer grafted hydroxyapatite whisker as a filler for dental composite resin with enhanced physical and mechanical properties
841
Polymer grafted silver and copper nanoparticles with exceptional stability against aggregation by a high yield one-pot synthesis
842
Polymer grafting surface as templates for the site-selective metallization
843
Polymer gratings achieved by focused ion beam
844
Polymer growth rate in a wire chamber with oxygen, water, or alcohol gas additives
845
Polymer growth rate in a wire chamber with oxygen, water, or alcohol gas additives
846
Polymer heterojunction photodiodes with MEHPPV doped with organic acceptors
847
Polymer heterostructures with embedded carbon nanotubes for efficient photovoltaic cells
848
Polymer hollow fiber three-dimensional matrices with controllable cavity and shell thickness
849
Polymer hollow particles: Encapsulation of phosphoric acid partial esters and morphology manipulation
850
Polymer hybrids of functionalized silsesquioxanes and organic polymers utilizing the sol–gel reaction of tetramethoxysilane
851
Polymer hydrogel assisted combustion synthesis of highly crystalline ceramic nanoparticles for SOFC electrolyte films
852
Polymer hydrogel supported Pd–Ni–B nanoclusters as robust catalysts for hydrogen production from hydrolysis of sodium borohydride
853
Polymer ignition
854
Polymer immobilized silane bridged metallocene catalysts for ethylene polymerization
855
Polymer impact on filter blinding during alum sludge filtration
856
Polymer impinged CdS/CuInSe2 solar cell
857
Polymer implant promotes axon growth in rat model of SCI
858
Polymer impregnation and pyrolysis (PIP) method for the preparation of laminated woven fabric/mullite matrix composites with pseudoductility
859
Polymer impregnation and pyrolysis process development for improving thermal conductivity of SiCp/SiC–PIP matrix fabrication
860
Polymer in a strip: profile of the monomer density
861
Polymer inclusion membranes (PIMs) with the ionic liquid (IL) Aliquat 336 as extractant: Effect of base polymer and IL concentration on their physical–chemical and elastic characteristics
862
Polymer inclusion membranes: The concept of fixed sites membrane revised
863
Polymer incompatibility as a potential tool for polyphenol recovery from olive mill wastewater
864
Polymer indentation: Numerical analysis and comparison with a spherical cavity model
865
Polymer induced crystal organization of composite resins
866
Polymer induced flocculation and separation of particulates from extracts of lignocellulosic materials
867
Polymer infrared photo-detector with high sensitivity up to 1100 nm
868
Polymer interfaces and emulsions, Edited by K. Esumi, Marcel Dekker, New York, 1999. ISBN 0-8247-1975-1; US$195.00
869
Polymer interfaces and the molecular basis of adhesion
870
Polymer interphase structure near nanoscale inclusions: Comparison between random walk theory and experiment
871
Polymer intrusion into narrow pores at the interface between a poor solvent and adsorbing and non-adsorbing surfaces
872
Polymer leds as laser media ?
873
Polymer light emitting devices with Langmuir–Blodgett (LB) films: Enhanced performance due to an electron-injecting layer of ionomers
874
Polymer light emitting diodes based on LiF/Al composite cathode
875
Polymer light-emitting devices with phosphorescence and fluorescence dye double-doped polymer as emitting layer
876
Polymer light-emitting diode using a new trialkoxyalkyl substituted PPV derivative
877
Polymer light-emitting diodes placed in microcavities
878
Polymer light-emitting diodes utilizing poly(phenylene vinylene)derivatives
879
Polymer light-emitting diodes with a phenyleneethynylene derivative as a novel hole blocking layer for efficiency enhancements
880
Polymer light-emitting diodes with amorphous indium-zinc oxide anodes deposited at room temperature
881
Polymer light-emitting diodes with polyethylene dioxythiophene–polystyrene sulfonate as the transparent anode
882
Polymer light-emitting diodes with spin-polarised charge injection
883
Polymer light-emitting electrochemical cell based on a novel block copolymer containing tri(ethylene oxide) spacers
884
Polymer light-emitting electrochemical cells with 1-methyoxy-4-(2-ethylhexyoxy)benzene as salt carrier
885
Polymer localization in random potential
886
Polymer material-supported titania nanofibers with different polyvinylpyrrolidone to TiO2 ratios for degradation of vaporous trichloroethylene
887
Polymer matrices effects on the sensitivity and the selectivity of optical chemical sensors
888
Polymer matrix composites filled with nanoporous metal powders: Preparation and electrical properties
889
Polymer matrix degradation and color formation in melt processed nylon 6/clay nanocomposites
890
Polymer matrix of polyethylene porous films functionalized by electrical discharge plasma
891
Polymer matrix–filler interaction mechanism for modified ion transport and glass transition temperature in the polymer electrolyte composites
892
Polymer mechanics as a model for short-term and flow-independent cartilage viscoelasticity
893
Polymer mediated capillary electrophoresis with attenuated total reflectance infrared microspectroscopy detection Original Research Article
894
Polymer mediated formation of corona-embedded gold nanoparticles in block polyelectrolyte micelles
895
Polymer mediated peptide immobilization onto amino-containing N-Tisopropylacrylamide-styrene core-shell particles
896
Polymer melt flow in plane channels: Hydrodynamic and thermal boundary layers
897
Polymer melt rheology with high-pressure CO2 using a novel magnetically levitated sphere rheometer
898
Polymer membrane air separation performance for portable oxygen enriched combustion applications
899
Polymer Membrane Ion-Selective Electrodes-What are the Limits?
900
Polymer Membrane Ion-Selective Electrodes-What are the Limits?
901
Polymer membrane sensors for sildenafil citrate (Viagra) determination in pharmaceutical preparations
902
Polymer membrane sensors for sildenafil citrate (Viagra) determination in pharmaceutical preparations Original Research Article
903
Polymer membranes for gas separation
904
Polymer membranes for hydrocarbon separation and removal
905
Polymer membranes loaded with lipids for taste sensing: electrochemical impedance spectroscopy studies Original Research Article
906
Polymer Membranes with Two-Dimensionally Arranged Pores Derived from Monolayers of Silica Particles
907
Polymer memories: Bistable electrical switching and device performance
908
Polymer mesocomposites: Ultrafiltration membrane materials with enhanced permeability, selectivity and fouling resistance
909
Polymer metal composite microspheres: Preparation and characterization of poly(St-co-AN)Ni microspheres
910
Polymer micelle-like aggregates of novel amphiphilic biodegradable poly(asparagine) grafted with poly(caprolactone)
911
Polymer micelles with pyridyl disulfide-coupled antigen travel through lymphatics and show enhanced cellular responses following immunization
912
Polymer micro and nanocomposites: Structure, interactions, properties
913
Polymer microarrays: Identification of substrates for phagocytosis assays
914
Polymer microcapsules by interfacial polyaddition between styrene–maleic anhydride copolymers and amines
915
Polymer microcavities by room temperature electron-beam evaporation of TiOx and SiOx
916
Polymer microchip integrated with nano-electrospray tip for electrophoresis–mass spectrometry
917
Polymer micro-environmental effects on the fluorescence characteristics of 5-aminoquinoline and 3-aminoquinoline
918
Polymer microenvironmental effects on the photophysics of cinchonine dication
919
Polymer microfluidic devices
920
Polymer micromachining for micro- and nanophotonics
921
Polymer microparticles production by supercritical assisted atomization
922
Polymer Microspheres with Permanent Antibacterial Surface from Surface-Initiated Atom Transfer Radical Polymerization
923
Polymer Microspray with an Integrated Thick-Film Microelectrode
924
Polymer miscibility, phase separation, morphological modifications and polymorphic transformations in dense fluids
925
Polymer modeling
926
Polymer modification by MEVVA source deposited and ion implantation
927
Polymer modification by supercritical impregnation
928
Polymer modification of bitumen: Advances and challenges
929
Polymer modified asphalt binders
930
Polymer Modified Carbon Paste Electrode as a Sensitive Sensor for the Electrochemical Determination of Riboflavin and Its Application in Pharmaceutical and Biological Samples
931
Polymer modified clay minerals: A review
932
Polymer modified glassy carbon electrode for the electrochemical determination of caffeine in coffee
933
Polymer modified jute fibre as reinforcing agent controlling the physical and mechanical characteristics of cement mortar
934
Polymer molding simulation – a mathematical imaging approach based on propagation of discrete distances
935
Polymer molecular weight and chain transfer during the photopolymerization of an aliphatic monoacrylate in a smectic liquid crystal
936
Polymer monolith microextraction with in situ derivatization and its application to high-performance liquid chromatography determination of hexanal and heptanal in plasma
937
Polymer monoliths with chelating functionalities for solid phase extraction of metal ions from water
938
Polymer mortars prepared using a polymeric resin and particles obtained from waste pet bottle
939
Polymer multilayer film formation studied by in situ ellipsometry and electrochemistry
940
Polymer multilayer systems for electronic applications
941
Polymer nanocomposite coatings with non-linear elastic response
942
Polymer nanocomposite foams
943
Polymer nanocomposite membranes for DMFC application
944
Polymer nanocomposites based on transition metal ion modified organoclays
945
Polymer nanocomposites for bone tissue substitutes
946
Polymer nanocomposites for improved drug delivery efficiency
947
Polymer nanocomposites for lithium battery applications
948
Polymer nanocomposites using zinc aluminum and magnesium aluminum oleate layered double hydroxides: Effects of LDH divalent metals on dispersion, thermal, mechanical and fire performance in various polymers
949
Polymer nanocomposites: a new strategy for synthesizing solid electrolytes for rechargeable lithium batteries
950
Polymer nanocomposites: from fundamental research to specific applications
951
Polymer nano-encapsulation of templated mesoporous silica monoliths with improved mechanical properties
952
Polymer nanofibers assembled by electrospinning
953
Polymer nanogels: A versatile nanoscopic drug delivery platform
954
Polymer nanoparticle-based porous antireflective coating on flexible plastic substrate
955
Polymer- Nanoparticles Composites for the Reduction of the Bacterial Adherence to Surfaces
956
Polymer nanoparticles for enhanced immune response: Combined delivery of tumor antigen and small interference RNA for immunosuppressive gene to dendritic cells
957
Polymer nanoparticles to decrease thermal conductivity of phase change materials
958
Polymer nanoparticles via intramolecular crosslinking of sulfonyl azide functionalized polymers
959
Polymer nanosphere lithography: fabrication of an ordered trigonal polymeric nanostructure
960
Polymer nanotechnology: Nanocomposites
961
Polymer nanotube nanocomposites: Correlating intermolecular interaction to ultimate properties
962
Polymer Networks with Slip-links: 1. Constitutive Equations for an Uncross-linked Network
963
Polymer Networks with Slip-links: 2. Constitutive Equations for a Cross-linked Network
964
Polymer Ni–MH battery based on PEO–PVA–KOH polymer electrolyte
965
Polymer nomenclature: the controversy between source-based and structure-based representations (a personal perspective)
966
Polymer optical fibers for textile applications – Bicomponent melt spinning from cyclic olefin polymer and structural characteristics revealed by wide angle X-ray diffraction
967
Polymer particles with a pomegranate-like internal structure via micro-dispersive polymerization in a geometrically confined reaction space I. Experimental study
968
Polymer pattern transformation and inorganic polygonal networks driven by thermal degradation process
969
Polymer Percolation Threshold in Multi-Component HPMC Matrices Tablets
970
Polymer permeability and time lag at high concentrations of sorbate
971
Polymer photovoltaic cells based on conjugated polymer–fullerene composites
972
Polymer photovoltaic devices using highly conductive poly(3,4-ethylenedioxythiophene-methanol) electrode
973
Polymer photovoltaic devices with transparent graphene electrodes produced by spin-casting
974
Polymer Photovoltaics: A Practical Approach, Frederik C. Krebs (Ed.). Society of Photo-Optical Instrumentation Engineers (SPIE) Press, Bellingham, WA, USA (2008), ISBN: 978-0-8194-6781-2
975
Polymer physics of the cytoskeleton
976
Polymer pinning at an interface
977
Polymer plating on AZ31 magnesium alloy surface and film evaluation of corrosion property
978
Polymer pretreatments for enhanced adhesion of metals deposited by the electroless process
979
Polymer product engineering utilising oscillatory baffled reactors
980
Polymer recycling in aqueous two-phase extractions using thermoseparating ethylene oxide–propylene oxide copolymers
981
Polymer reinforced by flax fibres as a viscoelastoplastic material cc
982
Polymer relaxation spectroscopy - dynamic aspects of polymers
983
Polymer replication of 3D microstructures employing a high content fluorine separation layer
984
Polymer resist materials for excimer ablation lithography
985
Polymer science and technology for new generation photonics and biophotonics
986
Polymer science applied to biological problems: Prediction of cytotoxic drug interactions with DNA
987
Polymer selection for passive sampling: A comparison of critical properties Original Research Article
988
Polymer self-assembled nano-structures and surface relief gratings induced with laser at 157 nm
989
Polymer semicrystalline texture made by interplay of crystal growth
990
Polymer separations by liquid interaction chromatography: Principles – prospects – limitations
991
Polymer siRNA conjugates synthesised by controlled radical polymerisation
992
Polymer solar cell based on poly(2,6-bis(3-alkylthiophen-2-yl)dithieno-[3,2-b;2′,3′-d]thiophene)
993
Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
994
Polymer solar cells based on MEH-PPV and PCBM
995
Polymer solar cells based on P3HT:PC71BM doped at different concentrations of isocyanate-treated graphene
996
Polymer solar cells based on P3HT:PC71BM doped at different concentrations of isocyanate-treated graphene
997
Polymer solar cells fabricated with 4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b′]dithiophene and alkyl-substituted thiophene-3-carboxylate-containing conjugated polymers: Effect of alkyl side-chain in thiophene-3-carboxylate monomer on the device performanc
998
Polymer solar cells using chlorinated indium tin oxide electrodes with high work function as the anode
999
Polymer solar cells with enhanced lifetime by improved electrode stability and sealing
1000
Polymer solar cells: Recent development and possible routes for improvement in the performance