بر اساس عنوان

1
Surface perfluorofuctionalization of polystyrene and styrene–butadiene–styrene block copolymer by perfluorodiacyl peroxides
2
Surface perturbation technique for flow-induced vibration and noise control
3
Surface pH and pC02 distributions in the Bellingshausen Sea, Southern Ocean, during the early Austral summer
4
Surface phase diagram and temperature induced phase transitions of Sn/Cu(1 0 0)
5
Surface phase diagrams for the Ag–Ge(111) and Au–Si(111) systems
6
Surface phase morphology and composition of the casting films of PVDF–PVP blend
7
Surface phase of TiO2 modified with La2O3 and its effect on the photocatalytic H2 evolution
8
Surface phase separations of PMMA/SAN blends investigated by atomic force microscopy
9
Surface phase transformation induced by the dezincification of a beta Cu–Zn alloy on highly deformed systems
10
Surface phase transformations, surface complexation and solubilities of hydroxyapatite in the absence/presence of Cd(II) and EDTA
11
Surface phase transition and electronic structure of c(5√2 × √2)R45°-Pb/Cu(1 0 0)
12
Surface phase transitions at metal–semiconductor interfaces: a revisit is needed
13
Surface phase transitions at O and CO catalytic reaction on Pd(1 1 1)
14
Surface phases analysis by grazing incidence of X-rays in a Bragg-Brentano diffractometer
15
Surface phenomena during ArF laser heating of graphite Model calculations, fast photographic and electron microscopic imaging
16
Surface phenomena during the early stages of sintering in steels modified with Fe–Mn–Si–C master alloys
17
Surface phenomena in aluminum combustion
18
Surface phenomena in discotic liquid crystals investigated using polarized FTIR transmission spectroscopy
19
Surface phenomena of HA/TiN coatings on the nanotubular-structured beta Ti–29Nb–5Zr alloy for biomaterials
20
Surface phenomena related to mirror degradation in extreme ultraviolet (EUV) lithography
21
Surface phenotype analysis of CD 16+ monocytes from leukapheresis collections for peripheral blood progenitors
22
Surface phonon polariton of wurtzite AlN thin film grown on sapphire
23
Surface phonon polariton of wurtzite GaN thin film grown on -plane sapphire substrate
24
Surface phonon–polaritons in rectangular quantum wires of polar ternary mixed crystals
25
Surface phonons in quasicrystals
26
Surface phonons of clean and hydrogen terminated Si(1 1 0) surfaces
27
Surface phonons of clean, hydrogen- and deuterium-terminated Si(0 0 1) surfaces
28
Surface phonons of GaP(1 1 0) and InAs(1 1 0)
29
Surface phonons of GaP(1 1 0) and InAs(1 1 0)
30
Surface photochemistry: Dibenzo-p-dioxin adsorbed onto silicalite, cellulose and silica
31
Surface photochemistry: Diffuse reflectance studies of thioketones included into p-tert-butylcalix[6 and 8]arenes
32
Surface photochemistry: Ketones included within a channel type solid support, the aluminophosphate AlPO4-5
33
Surface photo-crosslinking of corn starch sheets
34
Surface photo-crosslinking of corn starch sheets
35
Surface photocurrent gas sensor with properties dependent on Ru(dcbpy)2(NCS)2-sensitized ZnO nanoparticles
36
Surface photoelectric and photodegradation activities of AgNbO3 synthesized by solvothermal method Original Research Article
37
Surface photoelectric and visible light driven photocatalytic properties of zinc antimonate-based photocatalysts
38
Surface photoemission from Si(100) and inelastic electron mean-free-path in silicon
39
Surface photografting of arylazide derivatives on chalcogenide glasses
40
Surface photografting polymerization of vinyl acetate, maleic anhydride, and their charge-transfer complex. IX. Charge-transfer complex (5)
41
Surface photovoltage analysis of crystalline silicon for photovoltaic applications
42
Surface photovoltage and Auger electron spectromicroscopy studies of HfO2/SiO2/4H-SiC and HfO2/Al2O3/4H-SiC structures
43
Surface photovoltage and photoelectron spectra of GaP
44
Surface photovoltage behavior of porous silicon modified with SO4 specimens
45
Surface photovoltage characterization of an oriented α-Fe2O3 nanorod array
46
Surface photovoltage characterization of sol–gel derived Bi4Ti3O12 ferroelectric thin film on F-doped SnO2 conducting glass
47
Surface photovoltage in semiconductors under pulsed optical excitation, and its relevance to synchrotron radiation spectroscopy
48
Surface photovoltage measurement in CdS/CdTe solar cell: Grain boundary effect
49
Surface photovoltage measurements: A quick assessment of the photocatalytic activity?
50
Surface photovoltage measurements: a useful tool for the detection of electron injection processes in extremely thin absorber (ETA) solar cells
51
Surface photovoltage of thin organic films studied by modulated photoelectron emission
52
Surface photovoltage phase spectroscopy – a handy tool for characterisation of bulk semiconductors and nanostructures
53
Surface photovoltage phenomena: theory, experiment, and applications
54
Surface photovoltage property of magnesium ferrite/hematite heterostructured hollow nanospheres prepared with one-pot strategy
55
Surface photovoltage spectroscopy characterization of the GaAlAs/InGaAs/GaAs pseudomorphic high electron mobility transistor structures with varied quantum well compositional profiles
56
Surface photovoltage spectroscopy study of reduced and oxidized nanocrystalline TiO2 films
57
Surface photovoltage studies of multilayered structures
58
Surface photovoltage studies of Si nanocrystallites prepared by electrochemical etching
59
Surface photovoltage study of photogenerated charges in ZnO nanorods array grown on ITO
60
Surface photovoltaic properties of AlClPc/Me-PTC composite films
61
Surface photovoltaic properties of an expanded aza H2Pc containing four 1,10-phenanthroline subunits
62
Surface physical and chemical properties of atmospheric pressure plasma-treated polyamideimide fibrous mats using attenuated total reflection Fourier transform infrared imaging
63
Surface physical properties and its effects on the wetting behaviors of respirable coal mine dust
64
Surface physical studies of barium titanate ceramics
65
Surface physical studies of poly- and single-crystalline BaTiO3
66
Surface physical–morphological and chemical changes leading to performance enhancement of atmospheric pressure plasma treated polyester fabrics for inkjet printing
67
Surface physicochemical analysis of natural Lactococcus lactis strains reveals the existence of hydrophobic and low charged strains with altered adhesive properties
68
Surface physics at the nano-scale via scanning probe microscopy and molecular dynamics simulations
69
Surface physics with slow positron beams
70
Surface physiological changes induced by lactic acid on pathogens in consideration of pKa and pH
71
Surface pion condensation in finite nuclei
72
Surface pion condensation in finite nuclei Original Research Article
73
Surface plasma chromized burn-resistant titanium alloy
74
Surface plasma functionalization influences macrophage behavior on carbon nanowalls
75
Surface plasmon absorption characteristics and nonlinear optical properties of silver/copper codoped silica thin films
76
Surface plasmon absorption study of silver NP thin film containing 2,2′-bipyridine
77
Surface plasmon characteristics of nanocrystalline gold/DLC composite films prepared by plasma CVD technique
78
Surface plasmon coupled phosphorescence (SPCP)
79
Surface plasmon effects on surface second harmonic generation during Au nanoparticle deposition onto H–Si(1 1 1)
80
Surface plasmon effects on surface second harmonic generation during Au nanoparticle deposition onto H–Si(1 1 1)
81
Surface plasmon enhanced GaAs thin film solar cells
82
Surface plasmon enhanced intermediate band based quantum dots solar cell
83
Surface plasmon enhanced light emission of silicon-rich silicon nitride: Dependence on metal island size
84
Surface plasmon enhanced terahertz spectroscopic distinguishing between isotopes
85
Surface plasmon enhanced ultraviolet light-emitting devices
86
Surface plasmon excitation in a hollow prism
87
Surface plasmon excitation on a single subwavelength hole in a metallic sheet
88
Surface plasmon excitations in the wake of hollow atom relaxation at surfaces
89
Surface plasmon excited infrared-to-visible upconversion in Er3+-doped transparent glass ceramics
90
Surface Plasmon Field-Enhanced Fluorescence Spectroscopy Studies of the Interaction between an Antibody and Its SurfaceCoupled Antigen
91
Surface plasmon polariton propagation across a gentle silver step
92
Surface plasmon polariton scattering by small ellipsoid particles
93
Surface plasmon polaritons assisted diffraction in metal films with subwavelength hole array Original Research Article
94
Surface plasmon polaritons in concentric cylindrical structures
95
SURFACE PLASMON PROPERTIES OF HOLLOW AUAG ALLOYED TRIANGULAR NANOBOXES AND ITS APPLICATIONS IN SERS IMAGING AND POTENTIAL DRUG DELIVERY
96
Surface plasmon reflection at edges and resonance effects in metal bars
97
Surface plasmon reflection at edges and resonance effects in metal bars
98
Surface Plasmon Resonance (SPR) and cyclic voltammetry based immunosensor for determination of teliosporic antigen and diagnosis of Karnal Bunt of wheat using anti-teliosporic antibody
99
Surface plasmon resonance (SPR) confirms that MEPE binds to PHEX via the MEPE–ASARM motif: a model for impaired mineralization in X-linked rickets (HYP)
100
Surface plasmon resonance (SPR) sensors for the rapid, sensitive detection of the cellular response to osmotic stress
101
Surface plasmon resonance (SPR) studies on the interactions of carotenoids and their binding proteins
102
Surface plasmon resonance additivity of gold nanoparticles for colorimetric identification of cysteine and homocysteine in biological fluids
103
Surface plasmon resonance analysis of aqueous copper ions with amino-terminated self-assembled monolayers
104
Surface plasmon resonance analysis of dynamic biological interactions with biomaterials
105
Surface plasmon resonance and electrochemistry characterization of layer-by-layer self-assembled DNA and Zr4+ thin films, and their interaction with cytochrome c
106
Surface plasmon resonance and impedance spectroscopy on gold electrode for biosensor application
107
Surface plasmon resonance and molecular docking studies of bovine serum albumin interaction with neomycin: kinetic and thermodynamic analysis
108
Surface plasmon resonance as an innovative method for filling defects monitoring in nanoimprint lithography
109
Surface plasmon resonance based fiber optic ammonia gas sensor using ITO and polyaniline
110
Surface plasmon resonance based fiber optic hydrogen peroxide sensor using polymer embedded nanoparticles
111
Surface plasmon resonance based fiber optic sensor for the detection of low water content in ethanol
112
Surface plasmon resonance based fiber optic sensor for the detection of low water content in ethanol
113
Surface plasmon resonance based fiber optic sensor for the detection of triacylglycerides using gel entrapment technique
114
Surface plasmon resonance based fiber optic sensor with double resonance dips
115
Surface Plasmon Resonance Based Fiber Optic Sensor: Theoretical Simulation and Experimental Realization
116
Surface plasmon resonance based fiber-optic sensor for the detection of pesticide
117
Surface plasmon resonance based immunosensor for the detection of the cancer biomarker carcinoembryonic antigen
118
Surface plasmon resonance biosensor based on Au nanoparticle in titania sol–gel membrane
119
Surface plasmon resonance biosensor based on engineered proteins for direct detection of interferon-gamma in diluted blood plasma
120
Surface plasmon resonance biosensor based on Fe3O4/Au nanocomposites
121
Surface plasmon resonance biosensor based on integrated optical waveguide
122
Surface plasmon resonance biosensor based on water-soluble ZnO–Au nanocomposites Original Research Article
123
Surface plasmon resonance biosensor for detection of feline calicivirus, a surrogate for norovirus
124
Surface plasmon resonance biosensor for enrofloxacin based on deoxyribonucleic acid
125
Surface plasmon resonance biosensor for enrofloxacin based on deoxyribonucleic acid Original Research Article
126
Surface plasmon resonance biosensor for genetically modified organisms detection Original Research Article
127
Surface plasmon resonance biosensor for label-free and highly sensitive detection of point mutation using polymerization extension reaction
128
Surface plasmon resonance biosensor for real-time detection of genetically modified organisms
129
Surface plasmon resonance biosensor for the detection of ochratoxin A in cereals and beverages Original Research Article
130
Surface plasmon resonance biosensor modified with multilayer silver nanoparticles films
131
Surface plasmon resonance biosensor screening of poultry liver and eggs for nicarbazin residues Original Research Article
132
Surface plasmon resonance biosensor with high anti-fouling ability for the detection of cardiac marker troponin T Original Research Article
133
Surface plasmon resonance biosensors for detection of Alzheimer disease biomarker
134
Surface plasmon resonance characterization of thermally evaporated thin gold films
135
Surface plasmon resonance detection of ametryn using a molecularly imprinted sensing film prepared by surface-initiated atom transfer radical polymerization
136
Surface plasmon resonance detection of endocrine disruptors using immunoprobes based on self-assembled monolayers
137
Surface plasmon resonance detection of oligonucleotide sequences of the rpoB genes of Mycobacterium tuberculosis
138
Surface plasmon resonance detection of small molecule using split aptamer fragments
139
Surface plasmon resonance detection using amorphous carbon/Au multilayer structure
140
Surface Plasmon Resonance Detector for Capillary Chip Electrophoresis
141
Surface plasmon resonance effect on photocurrent amplification
142
Surface plasmon resonance enhanced ellipsometric analysis for monitoring of cobalt electrochemical reaction in solution
143
Surface plasmon resonance for real time in situ analysis of protein adsorption to polymer surfaces
144
Surface plasmon resonance for real-time study of lectin–carbohydrate interactions for the differentiation and identification of glycoproteins
145
Surface plasmon resonance imaging (SPRi) as an alternative technique for rapid and quantitative screening of small molecules, useful in drug discovery
146
Surface plasmon resonance imaging as a multidimensional surface characterization instrument—Application to biochip genotyping Original Research Article
147
Surface plasmon resonance imaging based multiplex biosensor: Integration of biomolecular screening, detection and kinetics estimation
148
Surface Plasmon Resonance Imaging Measurements of DNA and RNA Hybridization Adsorption onto DNA Microarrays
149
Surface Plasmon Resonance Imaging Measurements of the Inhibition of Shiga-like Toxin by Synthetic Multivalent Inhibitors
150
SURFACE PLASMON RESONANCE IMAGING MEASUREMENTS OF ULTRATHIN ORGANIC FILMS
151
Surface plasmon resonance imaging technique for nucleic acid detection
152
Surface Plasmon Resonance imaging-based sensing for anti-bovine immunoglobulins detection in human milk and serum Original Research Article
153
Surface plasmon resonance immunoassay for the detection of the TNFα biomarker in human serum
154
Surface plasmon resonance immunosensor for bacteria detection
155
Surface plasmon resonance immunosensor for histamine based on an indirect competitive immunoreaction Original Research Article
156
Surface plasmon resonance immunosensor for the detection of Yersinia enterocolitica
157
Surface plasmon resonance immunosensor using Au nanoparticle for detection of TNT
158
Surface plasmon resonance in chalcogenide glass-based optical system
159
Surface plasmon resonance in monitoring of complement activation on biomaterials
160
Surface plasmon resonance in nano-gold antimony glass–ceramic dichroic nanocomposites: One-step synthesis and enhanced fluorescence application
161
Surface plasmon resonance in near-field coupled gold cylinder arrays fabricated by EUV-interference lithography and hot embossing
162
Surface plasmon resonance in the visible region in sensors based on tapered optical fibers
163
Surface plasmon resonance induced reduction of high quality Ag/graphene composite at water/toluene phase for reduction of H2O2
164
Surface plasmon resonance instrument as a refractometer for liquids and ultrathin films
165
Surface plasmon resonance mass spectrometry: recent progress and outlooks
166
Surface plasmon resonance measurement of pyridoxal kinase–pyridoxamine binding on self-assembled monolayer
167
Surface plasmon resonance of Ag nanoparticles in the vicinity of a high impedance surface
168
Surface plasmon resonance of metal nanostructures as a complementary technique for microscopic size measurement
169
Surface Plasmon Resonance of SnO2/Au Bi-layer Films for Gas Sensing Applications
170
Surface plasmon resonance optical gas sensing of nanostructured ZnO films
171
Surface plasmon resonance optical sensor for detection of Pb2+ based on immobilized p-tert-butylcalix[4]arene-tetrakis in chitosan thin film as an active layer
172
Surface plasmon resonance properties and gas response in porphyrin Langmuir–Blodgett films
173
Surface plasmon resonance reflectance from nanoparticles in a liquid matrix: Retrieval of the optical properties using the maximum entropy model
174
Surface plasmon resonance sensing of liquids using polyelectrolyte thin films
175
Surface plasmon resonance sensing of nucleic acids: A review Review Article
176
Surface plasmon resonance sensor based on a single-mode polarization-maintaining optical fiber
177
Surface plasmon resonance sensor based on an array of diffraction gratings for highly parallelized observation of biomolecular interactions
178
Surface plasmon resonance sensor based on polarization interferometry and angle modulation
179
Surface plasmon resonance sensor for detection of bisphenol A in drinking water
180
Surface plasmon resonance sensor for Hg(II) detection by binding interactions with polypyrrole and 2-mercaptobenzothiazole
181
Surface plasmon resonance sensor for lysozyme based on molecularly imprinted thin films Original Research Article
182
Surface plasmon resonance sensor for profenofos detection using molecularly imprinted thin film as recognition element
183
Surface plasmon resonance sensor in the analysis of caffeine binding to CYP1A2 p450 monoxygenase in the presence and absence of NADPH
184
Surface plasmon resonance sensor with dispersionless microfluidics for direct detection of nucleic acids at the low femtomole level
185
Surface plasmon resonance sensors utilizing microfabricated channels
186
Surface plasmon resonance shows a gender difference in circulating annexin A5 in human
187
Surface plasmon resonance spectroscopic characterization of antibody orientation and activity on the calixarene monolayer
188
Surface plasmon resonance spectroscopic chiral discrimination using self-assembled leucine derivative monolayer
189
Surface plasmon resonance spectroscopic study of UV-addressable phenylalanine sensing based on a self-assembled spirooxazine derivative monolayer
190
Surface plasmon resonance spectroscopy as a probe of photo-induced switching in self-assembled spiroxazine monolayer
191
Surface plasmon resonance spectroscopy on rotated sub-micrometer polymer gratings generated by UV-laser based two-beam interference
192
Surface plasmon resonance study on enhanced refractive index change of an Ag+ ion-sensing membrane containing dithiosquarylium dye Original Research Article
193
Surface plasmon resonance study on the interaction of a dithiosquarylium dye with metal ions
194
Surface plasmon resonance study on the optical sensing properties of nanometric polyimide films to volatile organic vapours
195
Surface plasmon resonance transients at an electrochemical interface: time resolved measurements using a bicell photodiode Original Research Article
196
Surface plasmon resonance-based biosensors: From the development of different SPR structures to novel surface functionalization strategies
197
Surface plasmon resonance-based highly sensitive optical touch sensor with a hybrid noise rejection scheme
198
Surface Plasmon Resonance-Based Immunoassays
199
Surface plasmon resonance-based inhibition assay for real-time detection of Cryptosporidium parvum oocyst
200
Surface plasmon resonance-based trace detection of small molecules by competitive and signal enhancement immunoreaction Original Research Article
201
Surface plasmon response of metal spherical nanoshells coated with dielectric overlayer
202
Surface plasmon scattering on polymer–bimetal layer covered fused silica gratings generated by laser induced backside wet etching
203
Surface plasmon THz waves on gratings
204
Surface plasmon–polaritonsʹ contribution to the specific heat of quasiperiodic GaAs/SiO2 structures
205
Surface plasmon–polaritonsʹ contribution to the specific heat of quasiperiodic GaAs/SiO2 structures
206
Surface plasmons for enhanced silicon light-emitting diodes and solar cells
207
Surface plasmons in Drude metals
208
Surface plastic deformation distribution and microstructural evolution in the compound rolling of Ti–50Al billet
209
Surface plastic deformation in dry cutting at magnetically assisted machining
210
Surface Plasticization of Poly(ether ether ketone)
211
Surface polaritons in a dielectric at a boundary with a metal in crossed electric and magnetic fields
212
Surface polaritons propagation along micropipettes
213
Surface polaritons propagation along micropipettes
214
Surface polarization phenomena of organic monolayers and electron transport
215
Surface polyethylene glycol enhances substrate-mediated gene delivery by nonspecifically immobilized complexes
216
Surface porosity investigation of aluminum–silicon PM alloys
217
Surface porosity of fullerene black adsorbents modified by the Diels–Alder reaction
218
Surface porosity sealing effect of plasma nitrocarburizing on sintered unalloyed iron
219
Surface Position-Resolved Thermophysical Properties for Metallic Alloys
220
Surface potential analysis on doping superlattice by electrostatic force microscope
221
Surface potential and dixanthogen stability on chalcopyrite surface
222
Surface potential and wettability of enargite in potassium amyl xanthate solution
223
Surface potential changes of semiconducting oxides monitored by high-pressure photoelectron spectroscopy: Importance of electron concentration at the surface
224
Surface potential contrasts between silicon surfaces covered and uncovered with an organosilane self-assembled monolayer
225
Surface potential contrasts between silicon surfaces covered and uncovered with an organosilane self-assembled monolayer
226
Surface potential contrasts between silicon surfaces covered and uncovered with an organosilane self-assembled monolayer
227
Surface Potential Control of an Insulator Layer for the High Performance Organic FET
228
Surface potential decay on triglycine sulfate crystal
229
Surface potential driven dissolution phenomena of [0 0 0 1]-oriented ZnO nanorods grown from ZnO and Pt seed layers
230
Surface potential effects on friction and abrasion of sliding contacts lubricated by aqueous solutions
231
Surface potential imaging of PV cells with a Kelvin probe
232
Surface potential mapping of biased pn junction with kelvin probe force microscopy: application to cross-section devices
233
Surface potential mapping: A qualitative material contrast in SPM
234
Surface potential mapping: A qualitative material contrast in SPM
235
Surface potential measurement of self-assembled InAs dots by scanning Maxwell stress microscopy
236
Surface potential microscopy for organized molecular systems
237
Surface potential of hematite particles in high concentration electrolytes: Electroacoustic measurements and suspension stability
238
Surface potential of phosphoinositide membranes: Comparison between theory and experiment
239
Surface potential of β-alanine at the electrolyte/air and artificial seawater/air interface
240
Surface potential patterning of hydroxyapatite films by focused electron beam: Influence of the electron energy
241
Surface potential study of selective interaction of potassium ions with valinomycin in Langmuir-Blodgett films
242
Surface potential, fermi level and band gap energy of copper doped magnesium nickel ferrite nanoparticles
243
Surface potentials of few-layer graphene films in high vacuum and ambient conditions
244
Surface potentials of patterned organosilane self-assembled monolayers acquired by Kelvin probe force microscopy and ab initio molecular calculation
245
Surface potentials of polyaniline lb films
246
Surface precipitation of chromium in rapidly solidified Cu–Cr alloys
247
Surface pre-coating of talc particles by carboxyl methyl cellulose adsorption: Study of adsorption and consequences on surface properties and settling rate
248
Surface precrystallization of normal C24 alkane in porous glass
249
Surface Pre-grouting , Freezing for Shaft Sinking in Aquifer Formations
250
Surface preparation and characterization of single crystalline β-FeSi2
251
Surface preparation and spin-resolved photoemission of epitaxial MnSb(0001) films on GaAs(111)
252
Surface preparation of 4H–SiC substrates for hot-wall CVD of SiC layers
253
Surface preparation of silicon carbide for improved adhesive bond strength in armour applications
254
Surface preparation of TiO2 anatase (101): Pitfalls and how to avoid them
255
Surface pressure and wear characteristics of tubes submerged in bubbling fluid beds
256
Surface pressure and wind load characteristics on prisms immersed in a simulated transient gust front flow field
257
Surface pressure characteristics on a triangular prism located behind a porous fence
258
Surface pressure characteristics on a triangular prism located behind a porous fence
259
SURFACE PRESSURE CONTOUR PREDICTION USING A GRNN ALGORITHM
260
Surface pressure distribution survey in normal triangular tube arrays
261
Surface pressure effects from shock wave impact on inclined and curved clothing
262
Surface pressure measurements by using pressure-sensitive paints
263
Surface Pressure Study of an Airfoil Undergoing Combined Pitch and Low-Amplitude Plunge Motions
264
Surface pressure survey in a parallel triangular tube array
265
Surface pressure–area isotherms and surface dilational moduli of poly (N-isopropyl acrylamide) monolayers spread at air–water interface
266
Surface prestressing to improve fatigue strength of components by laser shot peening
267
Surface pretreatment of austenitic stainless steel and copper by chemical, plasma electrolytic or CO2 cryoblasting techniques for sol–gel coating
268
Surface probe measurements of the elasticity of sectioned tissue, thin gels and polyelectrolyte multilayer films: Correlations between substrate stiffness and cell adhesion
269
Surface processes and diffusion mechanisms of ion nitriding of stainless steel and aluminium
270
Surface processes and interactions with forest vegetation on a steep mudstone slope, Stołowe Mountains, SW Poland
271
Surface processes and phase transitions from ab initio atomistic thermodynamics and statistical mechanics
272
Surface processes and tectonics: Forcing of continental subduction and deep processes
273
Surface processes and water cycle in West Africa, studied from the AMMA-CATCH observing system
274
Surface processes during growth of InAs/GaAs quantum dot structures monitored by reflectance anisotropy spectroscopy
275
Surface processes in MEMS technology
276
Surface processes in microgravity for landing and sampling site selection of asteroid missions—Suggestions for MarcoPolo-R
277
Surface processes in silver and gold cyanidation
278
Surface processes of selective growth by atomic layer epitaxy
279
Surface processes on Si(1 1 1)7×7 and SiO2 mediated by low-energy ion irradiation in CF4
280
Surface processes on Si(1 1 1)7×7 and SiO2 mediated by low-energy ion irradiation in CF4
281
Surface processing of CdTe compound semiconductor by excimer laser doping
282
Surface processing of silicon carbide substrates
283
Surface processing of silicon carbide substrates
284
Surface processing of TlBr single crystals used for radiation detectors
285
Surface processing of TlBr single crystals used for radiation detectors
286
Surface processing with high-energy gas cluster ion beams
287
Surface products of the dissociative adsorption of methane on Pt{1 1 0}-(1×2)
288
Surface profile estimation by digital filtering for wear volume calculation
289
Surface profile measurement of a sinusoidal grid using an atomic force microscope on a diamond turning machine
290
Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern
291
Surface profiles of composites with PTFE matrix
292
Surface profiling of a transparent object by use of phase-shifting Talbot interferometry
293
Surface profiling of low-carbon steel with supersonic waterjets
294
Surface profiling using fringe projection technique based on Lau effect
295
Surface profilometry by wavelength scanning Fizeau interferometer
296
Surface profilometry of high aspect ratio features
297
Surface projected electronic band structure and adsorbate charge transfer dynamics: Ar adsorbed on Cu(1 1 1) and Cu(1 0 0)
298
Surface properties and activation energy analysis for superplastic carburizing of duplex stainless steel
299
Surface properties and activation energy analysis for superplastic carburizing of duplex stainless steel
300
Surface properties and activation energy of superplastically carburized duplex stainless steel
301
Surface properties and adhesion of wood fiber reinforced thermoplastic composites
302
Surface properties and adsorption behavior of cocamidopropyl dimethyl amine oxide under high temperature and high salinity conditions
303
Surface properties and aggregation of basic aluminium sulphate hydrolysis products: 1. Electrokinetic potential and hydration of BAS hydrolysis product particles
304
Surface properties and behaviour on abiotic surfaces of Staphylococcus carnosus, a genetically homogeneous species Original Research Article
305
Surface properties and bio-acceptability of Ti2O3 surfaces
306
Surface properties and bio-acceptability of Ti2O3 surfaces
307
Surface properties and biocompatibility of A-B-A type block copolymer membranes consisting of poly(γ-benzyl-image-glutamate) as the A component and polyisoprene as the B component
308
Surface properties and biocompatibility of solvent-cast poly[ -caprolactone] films
309
Surface properties and bulk rheology of Sterculia apetala gum exudate dispersions
310
Surface properties and catalytic activity of ferrospinels of nickel, cobalt and copper, prepared by soft chemical methods Original Research Article
311
Surface properties and catalytic behavior of Ru supported on composite La2O3–SiO2 oxides Original Research Article
312
Surface properties and catalytic behaviors of WO rSiO in 3 2 selective oxidation of cyclopentene to glutaraldehyde
313
Surface properties and catalytic conversion of cyclohexane over carbon supported bimetallic catalysts
314
Surface properties and catalytic performance for ethane combustion of La1−xKxMnO3+δ perovskites Original Research Article
315
Surface properties and catalytic performance in CO oxidation of cerium substituted lanthanum–manganese oxides Original Research Article
316
Surface properties and catalytic performance in methane combustion of Sr-substituted lanthanum manganites
317
Surface properties and catalytic performance of La1−xSrxFeO3 perovskite-type oxides for methane combustion
318
Surface properties and cell response of fluoridated hydroxyapatite/TiO2 coated on Ti substrate
319
Surface properties and cell response of low metal ion release Ti-6Al-7Nb alloy after multi-step chemical and thermal treatments
320
Surface properties and conductivity of bis(2-ethylhexyl) sulfosuccinate-containing polypyrrole
321
Surface properties and dispersion behaviors of SiC nanopowders
322
Surface properties and dye loading behavior of Zn2SnO4 nanoparticles hydrothermally synthesized using different mineralizers
323
Surface properties and fractal approach to molybdenum nitrides and their surface activity for hydrodenitrogenation
324
Surface properties and hemocompatibility of alkyl-siloxane monolayers supported on silicone rubber: effect of alkyl chain length and ionic functionality
325
Surface properties and hydrocracking activity of NiMo zeolite catalysts Original Research Article
326
Surface properties and interactions of vesicles
327
Surface properties and ion release from fluoride-containing bioactive glasses promote osteoblast differentiation and mineralization in vitro
328
Surface properties and microstructure of implanted TiN films using MEVVA ion source
329
Surface properties and microtexture of catalytic multi-walled carbon nanotubes
330
Surface properties and performance for VOCs combustion of LaFe1−yNiyO3 perovskite oxides
331
Surface Properties and Performance of Multilayer Coated Tools in Turning Inconel
332
Surface properties and phosphate adsorption of binary systems containing goethite and kaolinite
333
Surface properties and photocatalytic activity of nanocrystalline titania films
334
Surface Properties and Physicochemical Characterizations of a New Type of Anode Material, La1−xSrxCr1−yRuyO3−δ, for a Solid Oxide Fuel Cell under Methane at Intermediate Temperature
335
Surface properties and porous texture of montmorillonite-(Ce or Zr) phosphate cross-linked compounds
336
Surface properties and reactivity of Cu/γ-Al2O3 catalysts for NO reduction by C3H6: Influences of calcination temperatures and additives Original Research Article
337
Surface properties and reactivity of supported and unsupported molybdenum nitride catalysts Original Research Article
338
Surface properties and synthesis of the cellulose-based amphoteric polymeric surfactant
339
Surface properties and tensile bond strength of HVOF thermal spray coatings of WC-Co powder onto the surface of 420J2 steel and the bond coats of Ni, NiCr, and Ni/NiCr
340
Surface properties and water treatment capacity of surface engineered silica coated with 3-(2-aminoethyl) aminopropyltrimethoxysilane
341
Surface properties and water vapor adsorption–desorption characteristics of bamboo-based activated carbon
342
Surface properties and water vapor adsorption–desorption characteristics of bamboo-based activated carbon
343
Surface Properties Characterization of Suspended Matter in the Ebro Delta (Spain); With an Application to Trace Metal Sorption
344
Surface properties evolution of attapulgite by IGC analysis as a function of thermal treatment
345
Surface properties of (1 1 1), (0 0 1), and (1 1 0)-oriented epitaxial CuInS2/Si films
346
Surface properties of a coke-free Sn doped nickel catalyst for the CO2 reforming of methane
347
Surface Properties of a Reverse Osmosis Membrane Undergoing Grafting Process
348
Surface properties of a specifically modified high-grade medical polyurethane
349
Surface properties of a specifically modified high-grade medical polyurethane
350
Surface properties of a γ-based titanium aluminide at elevated temperatures
351
Surface properties of Al2O3-YSZ ceramic composites modified by a combination of biomimetic coatings and electric polarization
352
Surface properties of alkaline earth metal oxides
353
Surface properties of an associative alkali soluble polymer (Acrysol TT-935)
354
Surface properties of and cell adhesion onto allylamine-plasma-coated polyethylenterephtalat membranes
355
Surface properties of aqueous solutions of l-leucine Original Research Article
356
Surface properties of aromatic polymer film during thermal treatment
357
Surface properties of beached plastic pellets
358
Surface properties of bionic micro-pillar arrays with various shapes of tips
359
Surface properties of Bi–Pb liquid alloys
360
Surface properties of bolaamphiphiles in ethanol/water mixed solutions
361
Surface properties of calcium and magnesium oxide nanopowders grafted with unsaturated carboxylic acids studied with inverse gas chromatography
362
Surface properties of carbon micro-coils oxidized by a low concentration of oxygen gas Original Research Article
363
Surface properties of carbons obtained from hexachlorobenzene and hexachloroethane by combustion synthesis Original Research Article
364
Surface properties of catheters, stents and bacteria associated with urinary tract infections
365
Surface properties of cationic bolaamphiphiles and their mixed systems with oppositely charged conventional surfactant
366
Surface properties of cationic polyelectrolytes hydrophobically modified
367
Surface properties of cationic–nonionic mixed surfactant systems
368
Surface properties of ceramic ultrafiltration TiO2 membranes: Effects of surface equilibriums on salt retention Review Article
369
Surface properties of chemically modified activated carbons for adsorption rate of Cr (VI)
370
Surface properties of conjugated main-chain polyrotaxanes
371
Surface properties of copper based cermet materials
372
Surface properties of copper in different solvent mother solutions: A density functional theory study Review Article
373
Surface properties of copper-incorporated diamond-like carbon films deposited by hybrid magnetron sputtering
374
Surface properties of core-shell particles containing perfluoroalkyl acrylate in shell
375
Surface properties of CrN coated engine cylinders
376
Surface properties of cubic boron nitride thin films
377
Surface properties of CuCl2/AC catalysts with various Cu contents: XRD, SEM, TG/DSC and CO-TPD analyses
378
Surface Properties of Diamond Coatings for Cutting Tools
379
Surface properties of diluted aqueous solutions of 3-picoline
380
Surface properties of diluted solutions of n-heptane, n-octanol and n-octanoic acid in nitromethane Original Research Article
381
Surface properties of dimethylsilylated silicas, assessed using IGC at finite concentration
382
Surface properties of electrochemically oxidised viscose rayon based carbon fibres Original Research Article
383
Surface properties of electrochemically oxidized carbon fibers Original Research Article
384
Surface properties of enargite in MAA depressant solutions
385
Surface properties of enzymatic hydrolysis products of octenylsuccinate starch derivatives
386
Surface properties of excimer-laser-irradiated sintered alumina
387
Surface properties of film deposition using molecular dynamics simulation
388
Surface properties of fluorinated oxetane polyol modified polyurethane block copolymers
389
Surface properties of fluorinated single-walled carbon nanotubes
390
Surface properties of fumed silica/pyrocarbon prepared by pyrolysis of methylene chloride
391
Surface properties of granular activated carbons from agricultural by-products and their effects on raw sugar decolorization
392
Surface properties of Hafnium diboride(0 0 0 1) as determined by X-ray photoelectron spectroscopy and scanning tunneling microscopy
393
Surface properties of high-surface-area powder and thin film molybdenum nitrides treated in H2 and H2S
394
Surface properties of HMDSO plasma treated polyethylene terephthalate
395
Surface properties of icy transneptunian objects from the second ESO large program
396
Surface properties of in vitro bioactive and non-bioactive sol–gel derived materials
397
Surface properties of inorganic fillers for application in composite membranes-direct methanol fuel cells
398
Surface properties of ionomers based on styrene-b-acrylic acid copolymers obtained by copolymerization in emulsion
399
Surface properties of KOX and CsOX graphite intercalation compounds
400
Surface properties of Langmuir films of mono-, di-, and tetra-n-octyl adducts of C60 at the water–air interface
401
Surface properties of LiCoO2, LiNiO2 and LiNi1 xCoxO2
402
Surface properties of liquid In–Zn alloys
403
Surface properties of low specific surface powders using inverse gas chromatography
404
Surface properties of mesoporous catalytic supports
405
Surface properties of methacrylic copolymers containing a perfluoropolyether structure
406
Surface properties of Mg doped LaCoO3 particles with large surface areas and their enhanced catalytic activity for CO oxidation Original Research Article
407
Surface properties of modified acrylates
408
Surface properties of Mo-implanted PVD TiN coatings using MEVVA source
409
Surface properties of monolithic zirconia after dental adjustment treatments and in vitro wear simulation
410
Surface properties of monolithic zirconia after dental adjustment treatments and in vitro wear simulation
411
Surface properties of nanosize hollow silica particles on the molecular level
412
Surface properties of nanozirconia and their effect on its rheological behaviour and sinterability
413
Surface properties of natural aquatic sediments
414
Surface properties of Nb+C ion co-implanted stainless steel
415
Surface properties of new catanionic semi-fluorinated hybrid surfactants
416
Surface properties of new virginiamycin M1 derivatives
417
Surface properties of nuclear pairing with the Gogny force in a simplified model
418
Surface properties of O2-plasma-treated thermoplastic fluoroelastomers under mechanical stretching
419
Surface properties of octadecanol—grafted pine veneers
420
Surface properties of oxyfluorinated PAN-based carbon fibers Original Research Article
421
Surface properties of palladium catalysts supported on ternary ZrO2–Al2O3–WOx oxides prepared by the sol–gel method: Study of the chemical state of the support Original Research Article
422
Surface properties of PAN-based carbon fibers tuned by anodic oxidation in different alkaline electrolyte systems
423
Surface properties of petroleum oil polar fraction as investigated by Zetametry and DRIFT spectroscopy
424
Surface properties of phenolic compounds and their influence on the dispersion degree and oxidative stability of olive oil O/W emulsions
425
Surface properties of pillared acid-activated bentonite as catalyst for selective production of linear alkylbenzene
426
Surface properties of platinum thin films as a function of plasma treatment conditions
427
Surface properties of poly(dimethylsiloxane)-based inorganic/organic hybrid materials
428
Surface properties of polyamides modified with reactive polydimethylsiloxane oligomers and copolymers
429
Surface properties of polyamidines
430
Surface properties of polyamidines investigated by inverse gas chromatography
431
Surface properties of polyaniline/nano-TiO2 composites
432
Surface properties of polymer adsorbed zirconia nanoparticles
433
Surface properties of polypropylene/organoclay nanocomposites
434
Surface Properties of Polysilane Copolymers with Siloxane Pendant Groups
435
Surface properties of polyurethane composites for biomedical applications
436
Surface properties of polyurethanes modified by bioactive polysaccharide-based polyelectrolyte multilayers
437
Surface properties of porous hydroxyapatite derived from natural phosphate
438
Surface properties of pulsed laser deposited Ir, Rh, and Ir Rh 0.9 0.1 thin films for use as microelectrode arrays in electroanalytical heavy metal trace sensors
439
Surface properties of pyrite in the course of bioleaching by pure culture of Acidithiobacillus ferrooxidans and a mixed culture of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans
440
Surface properties of rare earth promoted MgO catalysts and their catalytic activity/selectivity in oxidative coupling of methane Original Research Article
441
Surface properties of Reactive Yellow 2 immobilised pHEMA and HEMA/chitosan membranes: characterisation of their selectivity to different proteins
442
Surface properties of red mud particles from potentiometric titration
443
Surface properties of Ru particles supported on carbon materials: A microcalorimetric study of the effects over the CO chemisorptions of residual anionic species
444
Surface properties of Ru(0001) electrodes interacting with formic acid
445
Surface properties of rutile TiO2(1 1 0) from molecular dynamics and lattice dynamics at 300 K: Variable-charge model results
446
Surface properties of Saccharomyces cerevisiae lees during sparkling wine ageing and their effect on flocculation
447
Surface properties of sediments from two Argentinean reservoirs and the rate of phosphate release
448
Surface properties of silica nanoparticles modified with polymers for polymer nanocomposite applications
449
Surface properties of silicon nitride powders
450
Surface properties of silicon oxide films deposited using low-pressure dielectric barrier discharge
451
Surface properties of silver doped titanium oxide films
452
Surface properties of sludge and their role in bioflocculation and settleability
453
Surface properties of sol–gel synthesized δ-MnO2 as assessed by N2 sorptometry, electron microscopy, and X-ray photoelectron spectroscopy
454
Surface properties of solid materials measured by modified inverse gas chromatography
455
Surface properties of some amphiphilic antidepressant drugs
456
Surface properties of Sr- and Co-doped LaFeO3
457
Surface properties of superparamagnetic iron oxide MR contrast agents: Ferumoxides, ferumoxtran, ferumoxsil
458
Surface properties of Ta2O5 layers prepared on SBA-15
459
Surface properties of the B2-based approximants in relation to quasicrystals
460
Surface properties of the B2-based approximants in relation to quasicrystals
461
Surface properties of the binary mixed systems of alkylpyridinium halides and sodium alkylsulfonates
462
Surface properties of the Cu50Zr50 metallic glass decorated with icosahedral CuxZr100−x (0 < x < 100) clusters by molecular dynamics simulations
463
Surface properties of the derivatives of lysosomotropic substances against other quaternary ammonium salts
464
Surface properties of the mixed oxides of iron and silica
465
Surface properties of the mushroom Strobilurus ohshimae result in food differentiation by collembolan species
466
Surface properties of titania-supported 12-molybdophosphoric acid hydrodesulphurization catalysts Original Research Article
467
Surface properties of titanium and zirconia dental implant materials and their effect on bacterial adhesion
468
Surface properties of titanium and zirconia dental implant materials and their effect on bacterial adhesion
469
Surface properties of titanium nitride: A first-principles study
470
Surface properties of treated ITO anodes for organic light-emitting devices
471
Surface properties of urethane coating containing perfluorinated additives
472
Surface properties of UV-irradiated poly(vinyl alcohol) films containing small amount of collagen
473
Surface properties of water soluble maltodextrin, starch acetates and starch acetates/alkenylsuccinates
474
Surface properties of wood and MDF after ultrasonic-assisted cutting
475
Surface properties of yam (Dioscorea sp.) starch powders and potential for use as binders and disintegrants in drug formulations
476
Surface properties of zinc oxide nanoparticles studied by inverse gas chromatography
477
Surface properties of ω-perfluorooctyl-alkyl polyacrylates: odd–even effect
478
Surface properties, textural features and catalytic performance for NO + CO abatement of spinels MAl2O4 (M = Mg, Co and Zn) developed by reverse and bicontinuous microemulsion method
479
Surface properties, thermal expansion, and segregation in the U–Zr solid solution
480
Surface property control of semiconducting metal oxide nanoparticles
481
Surface property enhancement of Ni-free medical grade austenitic stainless steel by low-temperature plasma carburising
482
Surface property of passivation layer on integrated circuit chip and solder mask layer on printed circuit board
483
Surface protection of copper by azoles in borate buffers-voltammetric and impedance analysis
484
Surface protection of titanium and titanium–aluminum alloys against environmental degradation at elevated temperatures
485
Surface protein composition and concentration of whey protein isolate-stabilized oil-in-water emulsions: Effect of heat treatment
486
Surface protein coverage and its implications on spray-drying of model sugar-rich foods: Solubility, powder production and characterisation
487
Surface protein mutations in chronic hepatitis B patients who received hepatitis B vaccine therapy
488
Surface quality analysis of the electropolishing of cemented carbide
489
Surface quality and shrinkage of the composite bus housing panel manufactured by RTM
490
Surface quality improvement of multistage forged microparts for wristwatches
491
Surface quality improvement of porous thin films suitable for nanoindentation
492
Surface quality improvements of WC–Co micro-punch finished by ion beam irradiation for micro-punching process of metal foil
493
Surface Quality in Dry Machining of 55Cr3 Steel Bars
494
Surface quality inspection of PbWO4 crystals by grazing incidence X-ray diffraction
495
Surface quality inspection of PbWO4 crystals by grazing incidence X-ray diffraction
496
Surface quality monitoring for process control by on-line vibration analysis using an adaptive spline wavelet algorithm
497
SURFACE QUALITY OF A WORK MATERIALʹS INFLUENCE ON THE VIBRATIONS OF THE CUTTING PROCESS
498
Surface quality of PVC fittings based on the design of the sprue Review Article
499
Surface quality of thermally compressed Douglas fir veneer
500
Surface quality, microstructure and magnetic properties of Nd2(Fe,Zr,Co)14B/α-Fe alloys prepared by different melt-spinning equipments
501
Surface quantitative characterization of poly(styrene-co-4-vinyl phenol)/poly(styrene-co-4-vinyl pyridine) blends with controlled hydrogen bonding interactions
502
Surface quantum well state at the striped Cu(1 1 0)(2 × 1)O surface studied by angle resolved photoemission spectroscopy
503
Surface radiance correction for shape from shading
504
Surface radiation fluxes in transient climate simulations
505
Surface radiation with conduction and natural convection in a two-floor enclosure
506
Surface Raman scattering studies on the adsorption of p-hydroxybenzoic acid at Au electrodes with ultraviolet excitation
507
Surface Raman spectroscopic studies of pyrazine adsorbed onto nickel electrodes
508
Surface Raman spectroscopic studies on the adsorption of pyridine at bare iron electrodes
509
Surface rate-limiting steps and modelling of the nitrogen growth kinetics of GaAs/sub 1-x/N/sub x//GaAs
510
Surface reaction characteristics at low temperature synthesis BaTiO3 particles by barium hydroxide aqueous solution and titanium tetraisopropoxide
511
Surface reaction control in digital etching of GaAs by using a tunable UV laser system: reaction control mechanism in layer-by-layer etching
512
Surface reaction diffusion during formation of molybdates and tungstates
513
Surface reaction kinetics in oxygen nonstoichiometry re-equilibration of BaTiO3−δ
514
Surface reaction kinetics of Ga1−xInxP growth during pulsed chemical beam epitaxy
515
Surface reaction kinetics of metal b-diketonate precursors with O radicals in radical-enhanced atomic layer deposition of metal oxides
516
Surface reaction kinetics on the atomic scale: studies by means of pulsed field desorption mass spectrometry
517
Surface reaction kinetics on the atomic scale: studies by means of pulsed field desorption mass spectrometry
518
Surface reaction kinetics studied with nanoscale lateral resolution
519
Surface reaction mechanism in MOCVD
520
Surface reaction mechanism in MOMBE-ALE of ZnSe and CdSe as determined by a new in-situ optical probing method
521
Surface reaction mechanism in MOVPE growth of ZnSe revealed using radicals produced by photolysis of alkyl azide
522
Surface reaction mechanism of atomic layer deposition of HfO2 on Ge(1 0 0)-2 1: A density functional theory study
523
Surface reaction mechanism of Y2O3 atomic layer deposition on the hydroxylated Si(1 0 0)-2 × 1: A density functional theory study
524
Surface reaction mechanisms for atomic layer deposition of silicon nitride
525
Surface Reaction Near a Stagnation Point
526
Surface reaction of CH SiH on Ge 100/ and Si 100/
527
Surface reaction of hydrogen on a palladium alloy membrane under co-existence of , CO, or
528
Surface reaction of titanium beryllide with water vapor
529
Surface reaction of triethylgallium and triethylantimony on GaSb(100)-(1×3)
530
Surface Reaction of Undoped AlGaN/GaN HEMT Based Two Terminal Devicein H^+ and OH^- Ion-contained Aqueous Solution
531
Surface reactions and kinetically-driven patterning scheme for selective deposition of Si and Ge nanoparticle arrays on HfO2
532
Surface reactions and performance of non-aqueous electrolytes with lithium metal anodes
533
Surface reactions in Al2O3 growth from trimethylaluminium and water by atomic layer epitaxy
534
Surface reactions in atomic layer deposition of HfO2, ZrO2 and Al2O3 on hydroxylated and sulfur-passivated GaAs(1 0 0) surfaces: A comparative study by density functional theory
535
Surface reactions of 2-iodopropane on GaAs(1 0 0)
536
Surface reactions of 6H–SiC(0 0 0 1)3 × 3 with oxygen molecules at various temperatures
537
Surface reactions of a plasma-sprayed CaO–P2O5–SiO2-based glass with albumin, fibroblasts and granulocytes studied by XPS, fluorescence and chemiluminescence
538
Surface reactions of acetone, acetylene and methylbutynol on a yttrium-modified magnesium oxide catalyst Original Research Article
539
Surface reactions of AsH3, H2Se, and H2S on the Zn2TiO4(010) surface
540
Surface reactions of bioactive glasses in buffered solutions
541
Surface reactions of Ga and As on Sb-terminated GaAs(001)
542
Surface reactions of hydrocarbon radicals: suppression of the re-deposition in fusion experiments via a divertor liner
543
Surface reactions of singlet excitons in solid films of 8-hydroxyquinoline aluminium (Alq3) Original Research Article
544
Surface reactions of TiCl4 and Al(CH3)3 on GaAs(100) during the first half-cycle of atomic layer deposition
545
Surface reactions of uranium oxide powder, thin films and single crystals
546
Surface reactions of vapor phase titanium atoms with halogen and nitrogen containing polymers studied using in situ X-ray photoelectron spectroscopy and atomic force microscopy
547
Surface reactions on beryllium after carbon vapour deposition and thermal treatment
548
Surface Reactions on MoO3 Induced by Tunable Pulse Infrared Free Electron Laser
549
Surface reactions on palladium hydride in vacuum, air and water studied in situ with mass spectrometry
550
Surface reactive species on MnOx(0.4)-CeO2 catalysts towards soot oxidation assisted with pulse dielectric barrier discharge
551
Surface reactivity and electrophoretic deposition of ZrO2–MgO mechanical mixture
552
Surface reactivity by gas introduction in Knudsen cell mass spectrometry Original Research Article
553
Surface reactivity measurements for OH radicals during deposition of SiO2 from tetraethoxysilane/O2 plasmas
554
Surface reactivity of aluminas prepared by different techniques
555
Surface reactivity of Andisols on volcanic ash along the Sunda arc crossing Java Island, Indonesia
556
Surface reactivity of graphite materials and their surface passivation during the first electrochemical lithium insertion
557
Surface reactivity of nanocrystalline Fe87Zr7Cu1B5 alloys
558
Surface reactivity of nanostructured tin oxide and Pt-doped tin oxide as studied by EPR and XPS spectroscopies
559
Surface reactivity of oxide phases generated on Pd(111) during the growth vs. reduction of PdO(101) films
560
Surface reactivity of Pd nanoparticles supported on polycrystalline substrates as compared to thin film model catalysts: infrared study of CH3OH adsorption
561
Surface reactivity of poorly-ordered minerals in podzol B horizons
562
Surface reactivity of pyrite and related sulfides
563
Surface reactivity of rapidly quenched nano-quasicrystalline ribbons with respect to biomolecules
564
Surface reactivity of volcanic ash from the eruption of Soufrière Hills volcano, Montserrat, West Indies with implications for health hazards
565
Surface reactivity of zinc-modified hydroxyapatite
566
Surface rearrangement at complex adsorbate–substrate interfaces
567
Surface Recognition and Complexations Between Synthetic Poly(ribo)nucleotides and Neutral Phospholipids and Their Implications in Lipofection
568
Surface recognition of biomacromolecules using nanoparticle receptors
569
Surface recombination analysis in silicon-heterojunction solar cells
570
Surface reconstruction accuracy for active volume intersection
571
Surface reconstruction and derivation of erosion rates over several glaciations (1 Ma) in an alpine setting (Sinks Canyon, Wyoming, USA)
572
Surface reconstruction and landslide displacement measurements with Pléiades satellite images
573
Surface reconstruction based on a dynamical system
574
Surface Reconstruction based on Lower Dimensional Localized Delaunay Triangulation
575
Surface Reconstruction between Simple Polygons via Angle Criteria
576
Surface reconstruction by smoothness map estimation
577
Surface reconstruction effects on atomic properties of semiconducting nanoparticles
578
Surface Reconstruction for Interactive Modeling of Freeform Solids by Virtual Sculpting
579
Surface reconstruction for mid-slice generation on variable lamination manufacturing
580
Surface reconstruction from point clouds by transforming the medial scaffold
581
Surface reconstruction in reactive dynamics: A kinetic Monte Carlo approach
582
Surface reconstruction modes of Cu2O(001) surface: A first principles study
583
Surface reconstruction of clean bcc-Fe{1 1 0}: A quasi-hexagonal top-layer with periodic height modulation
584
Surface reconstruction of Fe3O4(001)
585
Surface reconstruction of MoS2 to Mo2S3
586
Surface reconstruction of silicon and polysilicon by Nd:YAG laser etching: SEM, Raman and PL studies
587
Surface reconstruction of supported Pd on LaCoO3: Consequences on the catalytic properties in the decomposition of N2O
588
Surface reconstruction of ultrathin silicon nanosheets
589
Surface reconstruction of ZnO nanowire arrays via solvent-evaporation-induced self-assembly
590
Surface reconstruction on noble-metal catalysts during oxidation of ammonia Original Research Article
591
Surface Reconstruction Using Alpha Shapes
592
Surface reconstruction using Delaunay triangulation for applications in life sciences Original Research Article
593
Surface Reconstruction Using Reference Model For Future Prosthetic Design
594
Surface reconstruction, screw dislocations and anisotropic step flow growth of MnAs on GaAs(1 1 1)B substrates
595
Surface reconstructions of InGaAs alloys
596
Surface reconstructions of InGaAs alloys
597
Surface reconstructions of MnAs grown on GaAs(001)
598
Surface reconstructions on GaAs(001)
599
Surface reconstructions on the (100) CoSi2 surface
600
Surface Recrystallization in Nickel Base Single Crystal Superalloy DD6
601
Surface recrystallization of a gamma-TiAl alloy induced by shot peening and subsequent annealing treatments
602
Surface Redistribution of Interferon γ-Receptor and its Colocalization with the Actin Cytoskeleton
603
Surface redox catalysis and reduction kinetics of oxygen on copper–nickel alloys
604
Surface redox catalysis for O2 reduction on quinone-modified glassy carbon electrodes
605
Surface redox polymerized SPEEK–MO2–PANI (M = Si, Zr and Ti) composite polyelectrolyte membranes impervious to methanol
606
Surface Reducibility of Cerium Oxide Modified with Palladium
607
Surface reduction of ruthenium compounds with long exposure to an X-ray beam in photoelectron spectroscopy
608
Surface reduction processes of cerium oxide surfaces by H2 using ultra accelerated quantum chemical molecular dynamic study
609
Surface refinement and electronic properties of graphene layers grown on copper substrate: An XPS, UPS and EELS study
610
Surface reflectance and normal estimation from photometric stereo
611
Surface reflectance ratios between visible and infrared bands of satellite images over land areas in Japan for retrieval of aerosol optical thickness Original Research Article
612
Surface reflection and nonlinearities in ac Hall measurements of liquid metals
613
Surface reflection techniques and adsorption at interfaces
614
Surface regeneration of sulfur-poisoned Ni surfaces under SOFC operation conditions predicted by first-principles-based thermodynamic calculations
615
Surface registration using a dynamic genetic algorithm
616
Surface rejuvenation for multilayer metal deposition on polymer microspheres via self-seeded electroless plating
617
Surface related properties as an essential ingredient to e-cloud simulations
618
Surface related properties as an essential ingredient to e-cloud simulations
619
Surface relaxation and near-surface atomic displacements in the N/Cu(1 0 0) self-ordered system
620
Surface relaxation and near-surface atomic displacements in the N/Cu(1 0 0) self-ordered system
621
Surface relaxation and surface energy of face –centered Cubic metals
622
Surface relaxation and surface stress of 4d transition metals
623
Surface relaxation and surface stress of Au(1 1 1)
624
Surface relaxation and tilting in SrHfO3 orthorhombic perovskite: Hybrid HF-DFT LCAO calculations
625
Surface relaxation behavior of proton- and perfluoroalkyl-terminated poly(2-vinylpyridine) films
626
Surface relaxation in Cu(4 1 0)–O: A medium energy ion scattering study
627
Surface relief effects of α precipitates in a Ti–Mo alloy Original Research Article
628
Surface relief grating in hybrid films composed of azobenzene polymer and liquid crystal molecule
629
Surface relief terraces and self-assembled nanostructures in thin block copolymer films with solvent annealing
630
Surface remelting treatment of plasma-sprayed Al2O3 + 13 wt.% TiO2 coatings
631
Surface remeshing by local hermite diffuse interpolation
632
Surface renewal performance to independently estimate sensible and latent heat fluxes in heterogeneous crop surfaces
633
Surface reorientation dynamics of nematic liquid crystals
634
Surface representation in the visual system
635
Surface residence time measurements of transient methyl radicals
636
Surface residual stress evaluation in double-electrode butt welded steel plates
637
Surface resistance and sensitivity to hygrometry of various ceramic compositions for multilayer capacitors
638
Surface resistance investigations of the exchange of 3D monolayers with molecules self-assembled on planar gold surfaces
639
Surface resistance measurements of HTS thin films using SLAO dielectric resonator
640
Surface resistance measurements on nonceramic insulators
641
Surface resistance measurements on thin gold film electrodes coated with poly(o-aminophenol) films
642
Surface resistivity of uncoated insulators
643
Surface resistivity tailoring of ceramic insulators for an ion microprobe application
644
Surface resonance on the -reconstructed 5 ML Au on -4H–SiC(0 0 0 1)
645
Surface resonance transition of roughened Cu(1 1 0)
646
SURFACE RESONANCES OF METAL STRIPE GRATING ON THE PLANE BOUNDARY OF METAMATERIAL
647
Surface response functions for a thin-film between fluids with infinite boundaries and for a fluid-fluid interface between finite boundaries
648
Surface responses induced by point load or uniform traction moving steadily on an anisotropic half-plane
649
Surface restoration induced by lubricant additive of natural minerals
650
Surface restructuring and aperiodic kinetic oscillations in heterogeneous catalytic reactions
651
Surface restructuring process on a Ag/Ge(0 0 1) surface studied by photoelectron spectroscopy
652
Surface Retorting of Jordanian Oil Shale and Associated CO2 Emissions
653
Surface rheological properties of hydroxypropyl cellulose at air–water interface
654
Surface rheology of adsorbed surfactants and proteins
655
Surface rheology of aqueous casein–monoglyceride dispersions
656
Surface rheology of monolayers of phospholipids and cholesterol measured with axisymmetric drop shape analysis
657
Surface rheology, equilibrium and dynamic features at interfaces, with emphasis on efficient tools for probing polymer dynamics at interfaces
658
Surface roughening and color changes of coated aluminum sheets during plastic straining
659
Surface roughening and erosion rate change at low energy SIMS depth profiling of silicon during oblique O2þ bombardment
660
Surface roughening and grain orientation dependence of the erosion of polycrystalline stainless steel by hydrogen irradiation
661
Surface roughening and transport properties in the growth of nano-structured nickel electrodeposits on ITO substrate
662
Surface roughening by anisotropic adatom kinetics in epitaxial growth of La0.67Ca0.33MnO3
663
Surface roughening effect in sub-keV SIMS depth profiling
664
Surface roughening in Si1−xGex alloy films by 100 MeV Au: Composition dependency
665
Surface roughening induced by a characteristic surface structure of a Si film grown on Si(1 1 1)
666
Surface roughening of glass ionomer cements by neutral NaF solutions
667
Surface roughening of metal–polymer systems during plastic deformation Original Research Article
668
Surface roughening of silicon under ultra-low-energy cesium bombardment
669
Surface roughness (Ra) and kerf taper ratio (TR) characteristics of an abrasive water jet machined surfaces of glass/epoxy composite laminate were studied. Taguchiʹs design of experiments and analysis of variance were used to determine the effect of machi
670
Surface roughness analysis and improvement of micro-fluidic channel with excimer laser
671
Surface roughness analysis and improvement of PMMA-based microfluidic chip chambers by CO2 laser cutting
672
Surface roughness analysis in layered forming processes
673
Surface roughness analysis of a conifer forest canopy with airborne and terrestrial laser scanning techniques
674
Surface roughness analysis of hydrophilic SiO2/TiO2/glass nano bilayers by the level crossing approach
675
Surface roughness analysis, modelling and prediction in selective laser melting
676
Surface roughness and bond strength of enamel to composite
677
Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments
678
Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments
679
Surface Roughness and Chip Formation of AlSi/AIN Metal Matrix Composite by End Milling Machining using the Taguchi Method
680
Surface roughness and color characteristics of wood treated with preservatives after accelerated weathering test
681
Surface roughness and cutting force estimation in the CNC turning using artificial neural networks
682
Surface roughness and EDS characterization of a Y-TZP dental ceramic treated with the CoJet™ Sand
683
Surface roughness and electrical resistance on Si(1 0 0)2×3-Na surface
684
Surface roughness and erosion rate of abrasive jet micro-machined channels: Experiments and analytical model
685
Surface roughness and friction coefficient in peened friction stir welded 2195 aluminum alloy
686
Surface roughness and geological mapping at subhectometer scale from the High Resolution Stereo Camera onboard Mars Express
687
Surface roughness and gloss of dental materials as a function of force and polishing time in vitro
688
Surface roughness and interface diffusion studies on thin Mo and W films and Mo/Si and W/Si interfaces
689
Surface roughness and material removal in fluid jet polishing
690
Surface roughness and material strength of tribo-pairs in ring compression tests
691
Surface roughness and microstructure of yttria stabilized zirconia EB-PVD coatings
692
Surface roughness and morphology of three nanocomposites after two different polishing treatments by a multitechnique approach
693
Surface roughness and plastic flow in rail wheel contact
694
Surface roughness and power spectral density study of SHI irradiated ultra-thin gold films
695
Surface roughness and size effects on the morphology of graphene on a substrate
696
Surface roughness and structural aspects of anodic and cathodic plasma deposited a-Si:H at low temperature
697
Surface roughness and texture analysis in microscale
698
Surface roughness and three-dimensional heat conduction in thermophysical models
699
Surface roughness behaviour of ion irradiated industrial steel
700
Surface roughness changes on a hot-dipped galvanized sheet steel during deformation at low strain levels Original Research Article
701
Surface roughness characterization for fatigue life predictions using finite element analysis
702
Surface roughness characterization of Nicalon™ and HI-Nicalon™ ceramic fibers by atomic force microscopy
703
Surface roughness characterization of thermally sprayed and precision machined WC–Co and Alloy-625 coatings
704
Surface roughness classification for castings
705
Surface roughness classification for castings
706
Surface roughness criteria for cement paste nanoindentation
707
Surface roughness effect on friction behaviour of elastomeric material
708
Surface roughness effect on the metallic bipolar plates of a proton exchange membrane fuel cell
709
Surface roughness effects in a short porous journal bearing with a couple stress fluid
710
Surface Roughness Effects in Near-Bed Turbulence: Implications to Sediment Entrainment
711
Surface roughness effects in quantitative XPS: magic angle for determining overlayer thickness
712
Surface roughness effects in the catalytic behavior of vanadia supported on SBA-15
713
Surface roughness effects on noise from pipe jets
714
Surface roughness effects on the heat transfer due to turbulent round jet impingement on convex hemispherical surfaces
715
Surface roughness effects on the magnetization reversal of polycrystalline Fe/Ag thin films
716
Surface roughness effects on the oscillating squeeze-film behavior of long partial journal bearings
717
Surface roughness effects on the solar reflectance of cool asphalt shingles
718
Surface roughness effects on the tribo-charging and mixing homogeneity of adhesive mixtures used in dry powder inhalers
719
Surface Roughness Effects on Vortex Torque of Air Supported Gyroscope
720
Surface Roughness Effects Studies in Transportation Industries
721
Surface roughness estimation from RADARSAT-2 data in a High Arctic environment
722
Surface roughness evaluation of various cutting materials in hard turning of AISI H11
723
Surface roughness evolution in FEA simulations of bulk metal forming process
724
Surface roughness evolution on experimentally simulated faults
725
Surface roughness evolution under constant amplitude fatigue loading using crystal plasticity
726
Surface roughness evolutions in sliding wear process
727
Surface roughness factor of anodic oxide layer for electrolytic capacitors
728
Surface Roughness for Shallow Overland Flow on Crushed Stone Surfaces
729
Surface Roughness for Shallow Overland Flow on Crushed Stone Surfaces
730
Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach
731
Surface roughness induced random lasing in bio-polymeric dye doped film
732
Surface roughness influence on photothermal radiometry
733
Surface roughness influence on the pull-in voltage of microswitches in presence of thermal and quantum vacuum fluctuations
734
Surface roughness interpretation of 730 kg days CRESST-II results
735
Surface roughness investigation of semi-conductor wafers
736
Surface roughness measurement on machined surfaces using angular speckle correlation
737
Surface roughness mediates its effects on osteoblasts via protein kinase A and phospholipase A2
738
Surface roughness model and parametric optimization in finish turning using coated carbide insert: Response surface methodology and Taguchi approach
739
Surface roughness model for end milling: a semi-free cutting carbon casehardening steel (EN32) in dry condition
740
Surface roughness model for machining mild steel with coated carbide tool
741
Surface roughness of a hot-dipped galvanized sheet steel as a function of deformation mode
742
Surface roughness of AA7050 alloy turned bars: Analysis of the influence of the length of machining
743
Surface roughness of alumina fragments caused by hypervelocity impact
744
Surface roughness of debonded straight-tapered stems in cemented THA reduces subsidence but not cement damage
745
Surface roughness of diamond-like carbon films prepared using various techniques
746
Surface Roughness of Different Composite Resins after Application of 15% Carbamide Peroxide and Brushing with Toothpaste: An In-Vitro Study
747
Surface roughness of duplex steels: role of the microstructure
748
Surface roughness of etched composite resin in light of composite repair
749
Surface roughness of etched composite resin in light of composite repair
750
Surface roughness of GaN and thin AlGaN layers grown by molecular beam epitaxy
751
Surface roughness of impression materials and dental stones scanned by non-contacting laser profilometry
752
Surface roughness of microstructured component fabricated by μMIM
753
Surface roughness of microstructured component fabricated by μMIM
754
Surface roughness of rock faces through the curvature of triangulated meshes
755
Surface roughness of thin layers—a comparison of XRR and SFM measurements
756
Surface Roughness of Three Resin Composites Finished and Polished with different Systems
757
Surface Roughness of Tooth Coloured Restorative Materials
758
Surface roughness of two Polyamide Material Types Used in the Manufacture of Denture Base Compared with a Type of Heat-cured Acrylic Resin
759
Surface roughness optimization in an end-milling operation using the Taguchi design method
760
Surface Roughness Optimization in Drilling Process Using Response Surface Method (RSM)
761
Surface roughness parameters as predictors of anchorage strength in bone: a critical analysis
762
Surface roughness prediction based on cutting parameters and tool vibrations in turning operations
763
Surface roughness prediction by factorial design of experiments in turning processes
764
Surface Roughness Prediction in Rotary Ultrasonic Machining of Zirconia Dental Ceramic Using RSM
765
Surface Roughness Prediction in Turning Operation of Aluminum Alloy 6061using Artificial Neural Network (Ann)
766
Surface roughness prediction model by design of experiments for turning machinable glass–ceramic (Macor)
767
Surface roughness prediction of flow-formed AA6061 alloy by design of experiments
768
Surface roughness prediction of particulate composites using artificial neural networks in turning operation
769
Surface roughness prediction using measured data and interpolation in layered manufacturing
770
Surface roughness predictive modeling: neural networks versus regression
771
Surface roughness reduction using spray-coated hydrogen silsesquioxane reflow
772
Surface roughness resulting from wear of lithia-disilicate-based posterior crowns
773
Surface roughness studies on 4H-SiC layers grown by liquid phase epitaxy
774
Surface roughness with nanometer-scale Ag particles generated by ion implantation
775
Surface roughness, claw size and leg elasticity influences on the jumping of Acheta domesticus crickets
776
Surface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects
777
Surface roughness, porosity and wettability of gentamicin-loaded bone cements and their antibiotic release
778
Surface roughness, scratch resistance and tribological properties of hydrogenated amorphous carbon coatings prepared by low-pressure dielectric barrier discharge
779
Surface rumpling of a (Ni, Pt)Al bond coat induced by cyclic oxidation Original Research Article
780
Surface runoff and seed trapping efficiency of shrubs in a regenerating semiarid woodland in northern Ethiopia
781
Surface runoff and soil erosion on unpaved forest roads from rainfall simulation tests in northeastern Spain
782
Surface runoff estimation in an upper watershed using geospatial based soil conservation service-curve number method
783
Surface runoff estimation of Wadi Ba Al-Arid watershed NE Libya using SCS-CN, GIS and RS data
784
Surface runoff in urban catchments: morphological identification of unit hydrographs from urban databanks
785
Surface Runoff Losses of Copper and Zinc in Sandy Soils
786
Surface runoff phosphorus (P) loss in relation to phosphatase activity and soil P fractions in Florida sandy soils under citrus production
787
Surface runoff phosphorus (P) loss in relation to phosphatase activity and soil P fractions in Florida sandy soils under citrus production
788
Surface runoff scale effects in West African watersheds: modeling and management options
789
Surface ruptures induced by the Wenchuan earthquake: Their influence widths and safety distances for construction sites
790
Surface ruthenated tin oxide thin-film as a hydrocarbon sensor
791
Surface salinity in the Atlantic Ocean (30°S–50°N)
792
Surface salinity response to changes in the model parameters and forcings in a climatological simulation of the eastern North-Atlantic Ocean
793
Surface sample collection and dust source analysis in northwestern China
794
Surface scaling evolution and dielectric properties of sputter-deposited low loss Mg2SiO4 thin films
795
Surface scattering efficiency of some common materials for shielding pulsed neutron scattering instruments
796
Surface scattering efficiency of some common materials for shielding pulsed neutron scattering instruments
797
Surface scattering frequency and optical absorptivity of exciton in quasi-two-dimensional quantum wells
798
Surface science
799
Surface science
800
Surface science
801
Surface science
802
Surface science and electrochemical studies of WC and W2C PVD films as potential electrocatalysts
803
Surface science and the advancement of direct olefin epoxidation: A perspective on the article, “Partial oxidation of higher olefins on Ag(1 1 1) and Ag(1 1 0): Conversion of styrene to styrene oxide, benzene, and benzoic acid”, by And
804
Surface science and the atomic-scale origins of friction: what once was old is new again
805
Surface science approach to catalyst preparation – Pd deposition onto thin Fe3O4(1 1 1) films from PdCl2 precursor
806
Surface science as a tool for probing nanocatalysis phenomena
807
Surface science atoms to adproteins
808
Surface science based microkinetic analysis of ammonia synthesis over ruthenium catalysts
809
Surface science ceramics, composites and intergrowths
810
Surface science done at third generation synchrotron radiation facilities
811
Surface science from nanostructures to sensing
812
Surface science goes liquid !
813
Surface science investigations of atomic layer deposition half-reactions using TaF5 and Si2H6
814
Surface science models of industrial catalysts
815
Surface science of complex environmental interfaces: Oxide and carbonate surfaces in dynamic equilibrium with water vapor
816
Surface science of diamond: Familiar and amazing
817
Surface science of free standing semiconductor nanowires
818
Surface science opportunities in the electronic structure of ZnO (A perspective on the article, “Quantitative analysis of surface donors in ZnO”, by D.C. Look)
819
Surface science perspective of carbon dioxide chemistry—Adsorption kinetics and dynamics of CO2 on selected model surfaces
820
Surface Science Spectra: a hybrid journal-database
821
Surface science station of the infrared beamline at SPring-8
822
Surface science station of the infrared beamline at SPring-8
823
Surface science studies of elementary processes in photoelectrochemistry: adsorption of electrolyte components on layered transition metal dichalogenides
824
Surface science studies of environmentally relevant iron (oxy)hydroxides ranging from the nano to the macro-regime
825
Surface science studies of model fuel cell electrocatalysts
826
Surface science studies of selective catalytic reduction of NO: Progress in the last ten years
827
Surface science techniques: Edited by J. M. Walls and R. Smith, Pergamon, London, 1994, 185+ pages, $56.00 (available in the U.S.A. from Elsevier Science, Inc., Tarrytown, New York)
828
Surface science with aerosols
829
Surface science: dynamical behaviour of hydrogen
830
Surface Science: Foundations of Catalysis and Nanoscience
831
Surface science-based reaction design: increasing the ortho–para hydrogen conversion yield via molecular orientation, a case study
832
Surface screening effects by specifically adsorbed halide anions in the electrocatalytic reduction of a model organic halide at mono- and polycrystalline silver in acetonitrile
833
Surface seawater distributions of inorganic carbon and nutrients around the Galapagos Islands: results from the PlumEx experiment using automated chemical mapping
834
Surface second harmonic generation from a mercury film electrode electrochemically deposited on an iridium substrate: Part I. Non-adsorbing anions
835
Surface second harmonic generation from a mercury film electrode electrochemically deposited on an iridium substrate: Part II. Adsorbed anions
836
Surface second harmonic generation monitoring of the anion methyl orange during ion transfer reactions across a polarised water ∣ 1,2-dichloroethane interface
837
Surface sediment around the Jabuka Islet and the Jabuka Shoal: Evidence of Miocene tectonics in the Central Adriatic Sea
838
Surface sediment characteristics and present dynamics in alluvial fans of the central Spanish Pyrenees
839
Surface sediment characteristics and tower karst dissolution, Guilin, southern China
840
Surface sediment dinoflagellate cysts from the Hudson Bay system and their relation to freshwater and nutrient cycling
841
Surface sediment gases as indicators of subsurface hydrocarbons – examining the record in laboratory and field studies
842
Surface Segmentation by Variable Illumination
843
Surface segregation and adsorption effects of iron–technetium alloys from first-principles
844
Surface segregation and core-level shift of a PdRh alloy studied by XPS
845
Surface segregation and order–disorder phase transitions of ultra-thin fcc films
846
Surface segregation and oxidation of Ti in a V–Ti alloy
847
Surface segregation and reconstructive behaviour of the (1 0 0) and (1 1 0) surfaces of platinum–palladium bulk alloy single crystals: a voltammetric and LEED/AES study
848
Surface segregation behaviors of amorphous Ni Nb alloy under 65 35 oxidation in O at various temperatures
849
Surface segregation effects in electrocatalysis: kinetics of oxygen reduction reaction on polycrystalline Pt3Ni alloy surfaces
850
Surface segregation energies in low-index open surfaces of bimetallic transition metal alloys
851
Surface segregation in a polycrystalline Pd70Cu30 alloy hydrogen purification membrane
852
Surface segregation in bimetallic Pt3M (M = Fe, Co, Ni) alloys with adsorbed oxygen
853
Surface segregation in binary mixtures of imidazolium-based ionic liquids
854
Surface segregation in FeSi alloys
855
Surface segregation in HAYNES 230 alloy
856
Surface segregation in Nb-doped BaTiO3 films
857
Surface segregation in Ni(W) solid solution
858
Surface segregation in palladium based alloys from density-functional calculations
859
Surface segregation in Pt25Rh75 alloys studied by Monte Carlo simulations and the modified embedded atom method
860
Surface segregation in ternary alloys
861
Surface segregation in ternary alloys: a BFS study of Ni–Al–Cu 100/surface composition
862
Surface segregation in ternary Pt–Pd–Rh alloys studied with Monte Carlo simulations and the modified embedded atom method
863
Surface segregation in yttria-stabilized zirconia by means of angle resolved X-ray photoelectron spectroscopy Original Research Article
864
Surface segregation measurements via the linear programmed heating method: Part B — Experiment and results
865
Surface segregation of additives on SnO2 based powders and their relationship with macroscopic properties
866
Surface segregation of Al substrate metal on Zr film surface
867
Surface segregation of Al–Pb immiscible alloy system with Monte Carlo simulation
868
Surface segregation of aluminum atoms on Cu-9 at.% Al(1 1 1) studied by Auger electron spectroscopy and low energy electron diffraction
869
Surface segregation of antimony on ferritic single crystals
870
Surface segregation of Au–Ag bimetallic nanowires
871
Surface segregation of Au–Pd alloys in UHV and reactive environments: Quantification by a catalytic atom probe
872
Surface segregation of Au–Pd alloys in UHV and reactive environments: Quantification by a catalytic atom probe
873
Surface segregation of branched polyethyleneimines in a thermoplastic polyurethane
874
Surface segregation of chain ends in α,ω-fluoroalkyl-terminated polystyrenes films
875
Surface segregation of core atoms in core–shell structures
876
Surface segregation of fluorinated modifying macromolecule for hydrophobic/hydrophilic membrane preparation and application in air gap and direct contact membrane distillation
877
Surface segregation of gold for Au/Pd(1 1 1) alloys measured by low-energy electron diffraction and low-energy ion scattering
878
Surface segregation of implanted ions: Bi, Eu, and Ti at the MgO 100/surface
879
Surface segregation of interacting atoms: analytical approach using a thermodynamic model
880
Surface segregation of lanthanum and cerium ions in ceria/lanthana solid solutions: comparison between experimental results and a statistical–mechanical model
881
Surface segregation of polypeptide-based block copolymer micelles: An approach to engineer nanostructured and stimuli responsive surfaces
882
Surface segregation of Pt in γ′-Ni3Al: A first-principles study Original Research Article
883
Surface segregation of Sb in doped TiO2 rutile
884
Surface segregation of silver atoms on Au–Ag alloys according to data of laser-heating induced temperature potential shifts, XPS and conventional electrochemical methods
885
Surface segregation of sulphur in pure iron and in FeMo alloys: A comparative AES-radiotracer study
886
Surface segregation of transition metal impurities on the TiC(1 0 0) surface
887
Surface segregation of W doped in ZnO thin films
888
Surface segregation on Fe–25%Cr–2%Ni–0.14%Sb–N,S 100/ single crystal surfaces
889
Surface segregation phenomena of solute elements in Al–Pb and Al–Fe dilute binary alloys
890
Surface segregations in platinum-based alloy nanoparticles
891
Surface Seiches and Internal Kelvin Waves Observed Off Zadar (East Adriatic)
892
Surface seismic Rayleigh wave with nonlinear damping
893
Surface selective chemical deposition of polyanilines
894
Surface self-assembled zwitterionization of poly(vinylidene fluoride) microfiltration membranes via hydrophobic-driven coating for improved blood compatibility
895
Surface self-assembly of N-fluorenyl-9-methoxycarbonyl diphenylalanine on silica wafer
896
Surface self-organization: From wear to self-healing in biological and technical surfaces
897
Surface sensitive mode XAFS measurement of local structure of ordered Ge nanoclusters (quantum dots) on Si(0 0 1)
898
Surface sensitive mode XAFS measurement of local structure of ordered Ge nanoclusters (quantum dots) on Si(0 0 1)
899
Surface sensitive probe of the morphological and structural aspects of CdSe core–shell nanoparticles
900
Surface sensitivity in electron spectroscopy: coherent versus incoherent scattering models
901
Surface sensitivity of Auger-electron spectroscopy and X-ray photoelectron spectroscopy
902
Surface sensitivity of Mg2NiH4 leading to a profound color change
903
Surface sensitivity of multianode photomultiplier tubes
904
Surface sensitivity of multianode photomultiplier tubes
905
Surface sensitivity of X-ray photoelectron spectroscopy
906
Surface sensitivity of X-ray photoelectron spectroscopy
907
Surface separation and contact resistance considering sinusoidal elastic–plastic multi-scale rough surface contact
908
Surface settlements at a soft soil site due to bedrock dewatering
909
Surface shading effects on soil C loss in a temperate muck soil
910
Surface shape analysis of rough lumber for wane detection
911
Surface Shape Descriptors on 3D Faces
912
Surface shape design in fluid flow problems via hybrid optimization algorithms
913
Surface shape resonances of ridges on a thin film
914
Surface Shear Resistance of Dust Hotspot Soils on a Small Scale in Southwestern Iran
915
Surface shear stress and membrane fouling when considering natural water matrices Original Research Article
916
Surface silylation of cellulose microfibrils: preparation and rheological properties
917
Surface singularities on cyclic coverings and an inequality for the signature
918
Surface site density, silicic acid retention and transport properties of compacted magnetite powder
919
Surface sites and unrelaxed surface energies of tetrahedral silica polymorphs and silicate
920
Surface sites on carbon-supported Ru, Co and Ni nanoparticles as determined by microcalorimetry of CO adsorption
921
Surface skin protection of concrete with silicate-based impregnations: Influence of the substrate roughness and moisture
922
Surface sliding friction of negatively charged polyelectrolyte gels
923
Surface sliding simulation in micro-gear train for adhesion problem and tribology design by using molecular dynamics model
924
Surface smoothing and patterning of SiC by focused ion beams
925
Surface smoothing of SiGe strain-relaxed buffer layers by chemical mechanical polishing
926
Surface smoothing of sputter deposited amorphous CNx films by silicon addition
927
Surface smoothing of thin HTc YBa2Cu3O7−δ superconducting films by high-energy iodine ions
928
Surface softening and hardening of WC-Co using pulsed laser irradiation
929
Surface soil changes in base cation concentrations in fertilised hardwood and softwood plantations in Australia
930
Surface Soil Effects Study Using Short-period Microtremor Observations in Almería City, Southern Spain
931
Surface soil fungal and bacterial communities in aspen stands are resilient to eleven years of elevated CO2 and O3
932
Surface soil fungal and bacterial communities in aspen stands are resilient to eleven years of elevated CO2 and O3
933
Surface soil hydraulic properties in four soil series under different land uses and their temporal changes
934
Surface soil moisture estimation from the synergistic use of the (multi-incidence and multi-resolution) active microwave ERS Wind Scatterometer and SAR data
935
Surface soil moisture estimation over the AMMA Sahelian site in Mali using ENVISAT/ASAR data
936
Surface soil moisture parameterization of the VIC-2L model: Evaluation and modification
937
Surface soil moisture retrieval from L-band radiometry: a global regression study
938
Surface soil physical and hydrological characteristics in Bromus tectorum L. (cheatgrass) versus Artemisia tridentata Nutt. (big sagebrush) habitat
939
Surface soil responses to silage cropping intensity on a Typic Kanhapludult in the piedmont of North Carolina
940
Surface soil responses to silage cropping intensity on a Typic Kanhapludult in the piedmont of North Carolina
941
Surface soil water content spatial organization within irrigated and non-irrigated agricultural fields ☆
942
Surface solar cooling through water vapor desorption from photo-responsive sepiolite nanocomposites
943
Surface sol–gel growth of ultrathin SiO2 films on roughened Au electrodes: Extending borrowed SERS to a SERS inactive material
944
Surface Sol–gel Synthesis of Ultrathin Titanium and Tantalum Oxide Films
945
Surface Solid Dispersion and Solid Dispersion of Meloxicam: Comparison and Product Development
946
Surface solitons in trilete lattices
947
Surface speciation and alkane oxidation with highly dispersed Fe(III) sites on silica
948
Surface species and gas phase products in steam reforming of ethanol on TiO2 and Rh/TiO2 Original Research Article
949
Surface species during catalytic reduction of NO by propene studied by in situ IR-spectroscopy over Pt supported on mesoporous Al2O3 with MCM-41 type structure
950
Surface species during the crystallization of VOHPO4 ⋅ 0.5H2O
951
Surface Species Formed during Aniline Methylation on Zeolite H–Y Investigated by in Situ MAS NMR Spectroscopy
952
Surface species formed during thermal transformation of ethanol on ZnO powder
953
Surface species structure and activity in NO decomposition of an anatase-supported V–O–Mo catalyst
954
Surface species studied by angle-resolved product desorption: Emission mechanism and spatial distribution
955
Surface spectroscopic analysis of vapour grown carbon fibres prepared under various conditions Original Research Article
956
Surface spectroscopic characterization of titanium implant materials
957
Surface spectroscopic imaging of PEG-PLA tissue engineering constructs with ToF-SIMS
958
Surface spectroscopic study of basic sites on carbon blacks
959
Surface spectroscopy of Pt(1 1 1) single-crystal electrolyte interfaces with broadband sum-frequency generation
960
Surface spinodal decomposition in low temperature Al0.48In0.52As grown on InP(001) by molecular beam epitaxy
961
Surface spin-wave spectra in trifluorides MF3 (M=Fe, Cr, V)
962
Surface splicing defect analysis and application of polarization maintaining fiber using graph cut with illumination priors
963
Surface sprouting growth of Na2Nb2O6·H2O nanowires and fabrication of NaNbO3 nanostructures with controlled morphologies
964
Surface stabilisation of the ferromagnetic phase of FeGe2
965
Surface stability of epitaxial SrRuO3 films
966
Surface stability of potassium nitrate (KNO3) from density functional theory
967
Surface stabilization of hexagonal WO3 by non-metallic atoms: A DFT study
968
Surface Stabilization of Nano-sized Titanium Dioxide: Improving the Colloidal Stability and the Sintering Morphology
969
Surface stabilization of organics on hematite by conversion from terminal to bridging adsorption structures
970
Surface stabilized layer of a surface drying phase
971
Surface state analysis by means of confocal microscopy
972
Surface state analysis of YVO4:Eu3+ nanocrystals by electrostatic point charge model
973
Surface state control of III–V semiconductors using molecular modification
974
Surface state density decrease in nanostructured polycrystalline SnO2: modelling and experimental evidence
975
Surface state density distribution at vacuum-annealed InP(1 0 0) surface as derived from the rigorous analysis of photoluminescence efficiency
976
Surface state electron dynamics of clean and adsorbate-covered metal surfaces studied with the scanning tunnelling microscope
977
Surface state lifetime in quasi-one-dimensional oxygen stripes on Cu(1 1 0)
978
Surface state of CdTe crystals irradiated by KrF excimer laser pulses near the melting threshold
979
Surface state of Inconel 718 ultrasonic shot peened: Effect of processing time, material and quantity of shot balls and distance from radiating surface to sample
980
Surface state of TiO2 treated with low ion energy plasma
981
Surface state of Y3(Al,Ga)5O12:Tb phosphor under electron beam bombardment
982
Surface state quasiparticle dynamics at metal surfaces
983
Surface state studies of TiO2 nanoparticles and photocatalytic degradation of methyl orange in aqueous TiO2 dispersions
984
Surface state trapping models for SnO2-based microhotplate sensors
985
Surface states and accumulation nanolayer induced by Ba and Cs adsorption on the n-GaN(0 0 0 1) surface
986
Surface states and annihilation characteristics of positrons trapped at reconstructed semiconductor surfaces
987
Surface states and band-to-band non-radiative transitions in silicon single crystal investigated by piezoelectric photothermal spectroscopy
988
Surface states and its influence on luminescence in ZnS nanocrystallite
989
Surface states and passivation of p-Cd0.9Zn0.1Te crystal
990
Surface states and passivation of p-Cd0.9Zn0.1Te crystal
991
Surface states and reactivity of pyrite and marcasite
992
Surface states and resonances in field emission from low-index facets of clean tungsten
993
Surface states and second harmonic generation at the (1 1 0) nickel surface from a first-principles calculation
994
Surface states and second harmonic generation at the (1 1 0) nickel surface from a first-principles calculation
995
Surface states band structure of Gd-induced one-dimensional chain structure on Si(111) surface measured by angle-resolved photoelectron spectroscopy
996
Surface states in double-well superlattices: symmetric vs asymmetric interwell coupling
997
Surface states in double-well superlattices: symmetric vs asymmetric interwell coupling
998
Surface states in electrochemisorption
999
Surface states in molecular chains with strong mixing of Frenkel and charge-transfer excitons
1000
Surface states induced photoluminescence from Mn2+ doped CdS nanoparticles