<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Surface melting description
2
Surface melting observations in Antarctica by microwave radiometers: Correcting 26-year time series from changes in acquisition hours
3
Surface melting of close-packed Mg(0001)
4
Surface melting of crystallized poly(vinylidene fluoride) under carbon dioxide
5
Surface melting of methane and methane film on magnesium oxide
6
Surface melting of nanoscopic epitaxial films
7
Surface melting of nodular cast iron by Nd-YAG laser and TIG
8
Surface melting of Sn nanoparticles embedded in an Al matrix studied by high-temperature in situ X-ray diffraction
9
Surface melting of superheated crystals. Atomistic simulation study Original Research Article
10
Surface mesh enhancement with geometric singularities identification Original Research Article
11
Surface mesh quality evaluation
12
Surface mesh segmentation and smooth surface extraction through region growing Original Research Article
13
Surface mesh sizing control
14
Surface meshing using a geometric error estimate
15
Surface metal matrix composites
16
Surface metal modifiers for methanol electrooxidation on platinum, molybdenum and tungsten
17
Surface metallic nature caused by an in-gap state of reduced NiO: a photoemission study
18
Surface metallization of alumina ceramics by pulsed high energy density plasma process
19
Surface Methane Emission in a Former Dumpsite in Tijuana, Mexico
20
Surface metrology algorithm testing system
21
Surface micro/nanostructuring of titanium under stationary and non-stationary femtosecond laser irradiation
22
Surface microbiota analysis of Taleggio, Gorgonzola, Casera, Scimudin and Formaggio di Fossa Italian cheeses
23
Surface microcracks signal osteoblasts to regulate alignment and bone formation
24
Surface micro-fabrication of silica glass by excimer laser irradiation of organic solvent
25
Surface Micro-Hardness and Wear Resistance of a Self-Adhesive Flowable Composite in Comparison to Conventional Flowable Composites
26
Surface microhardness of different thicknesses of a premixed bioceramic material with or without the application of a moist cotton pellet
27
Surface microhardness of enamel after different home bleaching procedures
28
Surface microhardness of nanohybrid and microhybrid composite resins light cured at different distances
29
Surface micromachining for transition-edge detectors
30
Surface micromachining via solid electrochemical reaction on oxide ion conductors
31
Surface micropatterning to regulate cell functions
32
Surface microscopy features of congenital nevi
33
Surface microscopy of porous materials
34
Surface microstructural modification and fracture behavior of tensile deformed polypropylene with different percentage crystallinity
35
Surface microstructural modification and fracture behavior of tensile deformed polypropylene with different percentage crystallinity
36
Surface microstructure and cell biocompatibility of silicon-substituted hydroxyapatite coating on titanium substrate prepared by a biomimetic process
37
Surface microstructure and cell compatibility of calcium silicate and calcium phosphate composite coatings on Mg–Zn–Mn–Ca alloys for biomedical application
38
Surface microstructure and high temperature oxidation resistance of thermal sprayed CoCrAlY coating irradiated by high current pulsed electron beam
39
Surface microstructure and in vitro analysis of nanostructured akermanite (Ca2MgSi2O7) coating on biodegradable magnesium alloy for biomedical applications
40
Surface microstructure and mechanical property of WC-6% Co hard alloy irradiated by high current pulsed electron beam
41
Surface microstructure changes in the mechanically strained Fe–Al based intermetallics
42
Surface microstructure changes in the mechanically strained Fe–Al based intermetallics
43
Surface microstructure of 316L austenitic stainless steel by the salt bath nitrocarburizing and post-oxidation process known as QPQ
44
Surface microstructure of MgO deposited on SiO2 by analysis of plasmon excitations in photoemission experiments
45
Surface microstructure of MgO deposited on SiO2 by analysis of plasmon excitations in photoemission experiments
46
Surface microstructure of powder layers influenced by the forces of deposition and adhesion in electrostatic coating process
47
Surface microstructure of the oxide protective layers grown on vanadium-free Ti alloys for use in biomedical applications
48
Surface microstructures and antimicrobial properties of copper plasma alloyed stainless steel
49
Surface microstructures and epoxy bonded shear strength of Ti6Al4V alloy anodized at various temperatures
50
Surface Microstructures obtained by Femtosecond Laser Pulses
51
Surface microstructures of TSM resonators and liquid properties measurement
52
Surface microstructuring of silica glass by laser-induced backside wet etching with a DPSS UV laser
53
Surface micro-structuring of silicon by excimer-laser irradiation in reactive atmospheres
54
Surface microtextures of ice-rafted quartz grains revealing glacial ice in the Cenozoic Arctic
55
Surface micro-texturing of metallic cylindrical surface with proximity rolling-exposure lithography and electrochemical micromachining
56
Surface microtopography and soil penetration resistance associated with shrub patches in a semiarid rangeland
57
Surface microtopography in siloxane–polyurethane thermosets: The influence of siloxane and extent of reaction
58
Surface microtopography of surfactant modified montmorillonite
59
Surface mineral mapping at Steamboat Springs, Nevada, USA, with multi-wavelength thermal infrared images
60
Surface mineralisation of hydroxyapatite in modified simulated body fluid (mSBF) with higher amounts of hydrogencarbonate ions
61
Surface mineralization of Ti6Al4V substrates with calcium apatites for the retention and local delivery of recombinant human bone morphogenetic protein-2
62
Surface mineralogy and stratigraphy of the lunar South Pole-Aitken basin determined from Clementine UV/VIS and NIR data
63
Surface miscibility of EPC/DOTAP/DOPE in binary and ternary mixed monolayers
64
Surface mismatch and stress relief mechanisms at metallic surfaces
65
Surface mixed and mixing layer depths
66
Surface mobility over a square contact area of an infinite plate: experimental measurements and numerical prediction
67
Surface mode excitation in platelet SiOx precipitates in silicon
68
Surface mode excitation in platelet SiOx precipitates in silicon
69
Surface model of formation of silicon nitride on monocrystalline silicon
70
Surface modeling and chemical solution deposition of SrO(SrTiO3)n Ruddlesden–Popper phases Original Research Article
71
Surface modeling of human carrying capacity of terrestrial ecosystems in China
72
Surface modeling of human carrying capacity of terrestrial ecosystems in China
73
Surface Modeling: High Accuracy and High Speed Methods. CRC Press, published February (2011), 711 pp., hardbound, price 129.95 $
74
Surface Modeling: High Accuracy and High Speed Methods. CRC Press, published February (2011), 711 pp., hardbound, price 129.95 $
75
Surface modelling of crystalline non-metallic inclusions
76
Surface modelling of global terrestrial ecosystems under three climate change scenarios
77
Surface modelling of global terrestrial ecosystems under three climate change scenarios
78
Surface modelling of human population distribution in China
79
Surface modelling of human population distribution in China
80
Surface modelling of soil pH
81
Surface modelling of soil properties based on land use information
82
Surface modelling on heavy atom crystalline compounds: HfO2 and UO2 fluorite structures Original Research Article
83
SURFACE MODES AT THE INTERFACES BETWEEN ISOTROPIC MEDIA AND UNIAXIAL PLASMA
84
Surface modes in sheared boundary layers over impedance linings
85
Surface modes in the infrared spectrum of hydrous minerals: the OH stretching modes of bayerite
86
Surface modes with biquadratic coupling and uniaxial anisotropy in semi-infinite Heisenberg antiferromagnet
87
Surface modi®cation of oxide thin ®lm and its gas-sensing properties
88
Surface modi®cation of silicon and silica in biological environment: an X-ray photoelectron spectroscopy study
89
Surface modification and adhesion improvement of expanded poly(tetrafluoroethylene) films by plasma graft polymerization
90
Surface modification and aging studies of addition-curing silicone rubbers by oxygen plasma
91
Surface modification and alloying of metallic materials with low-energy high-current electron beams
92
Surface modification and antibacterial activity of electrospun polyurethane fibrous membranes with quaternary ammonium moieties
93
Surface modification and application of multi-walled carbon nanotubes in fire-retardant coatings
94
Surface modification and biocompatible improvement of polystyrene film by Ar, O2 and Ar + O2 plasma
95
Surface modification and bioconjugation of FeCo magnetic nanoparticles with proteins
96
Surface modification and characterisation of a coal-based activated carbon Original Research Article
97
Surface modification and characterisation of Ti–Al–V alloys
98
Surface modification and characterization of carbon black with oxygen plasma Original Research Article
99
Surface modification and characterization of highly dispersed silica nanoparticles by a cationic surfactant
100
Surface modification and characterization of impregnated paper
101
Surface modification and characterization of Jordanian kaolinite: Application for lead removal from aqueous solutions
102
Surface modification and characterization of magnesium hydroxide sulfate hydrate nanowhiskers
103
Surface modification and characterization of thermoplastic polyurethane
104
Surface modification and characterization of γ-Fe2O3 nanoparticles synthesized by chemically-induced transition
105
Surface modification and characterizations of basalt fibers with non-thermal plasma
106
Surface modification and corrosion properties of implanted and DLC coated stainless steel by plasma based ion implantation and deposition
107
Surface modification and crystallization of the BaO–B2O3–SiO2 glassy system using CO2 laser irradiation
108
Surface modification and development of titanium bipolar plates for PEM fuel cells
109
Surface modification and electrochemical studies of spherical nickel hydroxide
110
Surface modification and functionalization of silk fibroin fibers/fabric toward high performance applications
111
Surface modification and functionalization through the self-assembled monolayer and graft polymerization
112
Surface modification and hydrogen isotope retention in CFC during plasma irradiation in the Tore Supra tokamak
113
Surface modification and imaging of hydrogen passivated silicon with a combined scanning electron/scanning tunneling microscope
114
Surface modification and imaging of hydrogen passivated silicon with a combined scanning electron/scanning tunneling microscope
115
Surface modification and its effect on the interfacial properties of model aramid-fibre/epoxy composites
116
Surface modification and lamination of polymers by photografting
117
Surface modification and lamination of polymers by photografting
118
Surface modification and oxidation kinetics of hot-pressed AlN–SiC–MoSi2 electroconductive ceramic composite
119
Surface modification and paclitaxel drug delivery of folic acid modified polyethylene glycol functionalized hydroxyapatite nanoparticles
120
Surface modification and performance enhancement of nano-hybrid f-MWCNT/PVP90/PES hemodialysis membranes
121
Surface modification and photocatalytic activity of distorted pyrochlore-type Bi2M(M=In, Ga and Fe)TaO7 photocatalysts Original Research Article
122
Surface modification and properties of Bombyx mori silk fibroin films by antimicrobial peptide
123
Surface modification and property analysis of biomedical polymers used for tissue engineering
124
Surface modification and retardation of back reaction by nitrogen ion-beam treatment in dye-sensitized solar cells
125
Surface modification and submicron structure of carbon fibers through high current pulse
126
Surface modification at the molecular level in mineral beneficiation
127
Surface modification at tungsten and tungsten coated graphite due to low energy and high fluence plasma and laser pulse irradiation
128
Surface modification by cold-plasma technique for dental implants—Bio-functionalization with binding pharmaceuticals
129
Surface modification by electrical discharge machining: A review Review Article
130
Surface modification by grafted sensitive polymer brushes: An ellipsometric study of their properties
131
Surface modification by negative-ion implantation
132
Surface modification by novel friction thermomechanical process of aluminum alloy castings
133
Surface modification by oil jet peening in Al alloys, AA6063-T6 and AA6061-T4: Residual stress and hardness
134
Surface modification by oil jet peening in Al alloys, AA6063-T6 and AA6061-T4 Part 2: Surface morphology, erosion, and mass loss
135
Surface modification by silver coating for improving electrochemical properties of LiFePO4
136
Surface modification by using of immobilized electrostatic self-assembly of bacteriorhodopsin as protein memory
137
Surface modification by using of immobilized electrostatic self-assembly of bacteriorhodopsin as protein memory
138
Surface modification by vacuum annealing for field emission from heavily phosphorus-doped homoepitaxial (1 1 1) diamond
139
Surface modification during Nd:YAG (1064 nm) pulsed laser cleaning of organic fibrous materials
140
Surface modification effects on film growth with atmospheric Ar/Ar+O2 plasma
141
Surface modification for adhesion enhancement of PET-laminated steel using atmospheric pressure plasma
142
Surface modification for aluminium pigment inhibition
143
Surface modification for controlled studies of cell–ligand interactions
144
Surface modification for enhanced silanation of zirconia ceramics
145
Surface modification for enhancing behaviors of vascular endothelial cells onto polyurethane films by microwave-induced argon plasma
146
Surface modification for hydrophilic property of stainless steel treated by atmospheric-pressure plasma jet
147
Surface modification for the perfluorosulfonate proton-conducting electrolyte membrane
148
Surface modification for titanium implants by hydroxyapatite nanocomposite
149
Surface modification in microsystems and nanosystems
150
Surface modification methods to improve behavior of biosensor based on imaging ellipsometry
151
Surface modification of (Tb,Dy)Fe2 alloy by nitrogen ion implantation
152
Surface modification of (Tb0.3Dy0.7)Fe1.95 alloy by ion nitriding process
153
Surface modification of 2014 aluminium alloy–Al2O3 particles composites by nickel electrochemical deposition
154
Surface modification of 2014 aluminium alloy–Al2O3 particles composites by nickel electrochemical deposition
155
Surface modification of 2014 aluminium alloy–Al2O3 particles composites by nickel electrochemical deposition
156
Surface modification of 2205 duplex stainless steel by low temperature salt bath nitrocarburizing at 430 °C
157
Surface modification of 30CrNiMo8 low-alloy steel by active screen setup and conventional plasma nitriding methods
158
Surface modification of 316L stainless steel with high-intensity pulsed ion beams
159
Surface modification of 3Y-TZP with cerium oxide
160
Surface modification of 5083 Al alloy by electrical discharge alloying processing with a 75 mass% Si–Fe alloy electrode
161
Surface modification of 6150 steel substrates for the deposition of thick and adherent diamond-like carbon coatings
162
Surface modification of 9Cr18 bearing steels by a metal and carbon co-plasma immersion ion implantation
163
Surface modification of a biomedical poly(ether)urethane by a remote air plasma
164
Surface modification of a biomedical polyethylene terephthalate (PET) by air plasma
165
Surface modification of a ceramic membrane by the SPCP-CVD method suitable for enzyme immobilization
166
Surface modification of a commercial thin film composite polyamide reverse osmosis membrane by carbodiimide-induced grafting with poly(ethylene glycol) derivatives Original Research Article
167
Surface modification of a commercial thin-film composite polyamide reverse osmosis membrane through graft polymerization of N-isopropylacrylamide followed by acrylic acid
168
Surface modification of a granular activated carbon by citric acid for enhancement of copper adsorption Original Research Article
169
Surface modification of a granular activated carbon by dielectric barrier discharge plasma and its effects on pentachlorophenol adsorption
170
Surface modification of a layered alkali titanate with organosilanes
171
Surface modification of a low cost bentonite for post-combustion CO2 capture
172
Surface modification of a low-modulus Ti–7.5Mo alloy treated with aqueous NaOH
173
Surface modification of a medical grade Co‐Cr‐Mo alloy by low-temperature plasma surface alloying with nitrogen and carbon
174
Surface modification of a microcellular porous solid: carbon foam
175
Surface modification of a natural graphite/phenol formaldehyde composite plate with expanded graphite
176
Surface modification of a perfluorinated ionomer using a glow discharge deposition method to control protein adsorption
177
Surface modification of a poly(vinyl chloride) membrane by UV irradiation for reduction in sludge adsorption Original Research Article
178
Surface modification of a polyamide 6 film by He/CF4 plasma using atmospheric pressure plasma jet
179
Surface modification of a polyamide reverse osmosis membrane for chlorine resistance improvement
180
Surface modification of a polyester non-woven with a dielectric barrier discharge in air at medium pressure
181
Surface modification of a polytetrafluoroethylene film with cyclotron ion beams and its evaluation
182
Surface modification of a segmented polyetherurethane using a low-powered gas plasma and its influence on the activation of the coagulation system
183
Surface modification of a silicate substrate by a “grafting from” methodology utilizing a perester initiator
184
Surface modification of a Ti–6Al–4V alloy by thermal oxidation
185
Surface modification of a Ti–Al–Zr alloy by niobium ion implantation
186
Surface modification of a titanium alloy with a phospholipid polymer prepared by a plasma-induced grafting technique to improve surface thromboresistance
187
Surface modification of a WTi thin film on Si substrate by nanosecond laser pulses
188
Surface modification of A2014 Al alloy using a pulse-current pressure sintering process
189
Surface modification of A390 hypereutectic Al–Si cast alloys using friction stir processing
190
SURFACE MODIFICATION OF AA 7075-T651 PLATE USING FRICTION STIR PROCESSING WITH SIC PARTICLES
191
Surface Modification of AB2 and AB5 Hydrogen Storage Alloy Electrodes by the Hot-Charging Treatment
192
Surface modification of acrylonitrile-butadiene-styrene (ABS) with heterogeneous photocatalysis (TiO2) for the substitution of the etching stage in the electroless process
193
Surface modification of activated carbon fiber and its adsorption for vitamin B1 and folic acid
194
Surface modification of activated carbon for CO2 adsorption
195
Surface modification of activated carbons for CO2 capture
196
Surface modification of active metals through atom transfer radical polymerization grafting of acrylics
197
Surface modification of aircraft used composites for adhesive bonding
198
Surface modification of AISI 304 austenitic stainless steel by plasma nitriding
199
Surface modification of AISI 410 stainless steel using laser engineered net shaping (LENSTM)
200
Surface modification of Al–12.6Si alloy by high current pulsed electron beam
201
Surface modification of Al–20Si alloy by high current pulsed electron beam
202
Surface modification of Al2O3 bioceramic by NH+2 ion implantation
203
Surface Modification of Al2O3 Fiber with Binary Nanoparticles using a Dry-Mechanical Coating Technique
204
Surface Modification of Aligned Carbon Nanotube Arrays for Electron Emitting Applications
205
Surface modification of alumina by metal doping
206
Surface modification of alumina-based refractories using a xenon arc lamp
207
Surface modification of aluminium by friction stir processing
208
Surface modification of aluminium by plasma immersion ion implantation
209
Surface modification of aluminum by n-pentanephosphonic acid: XPS and electrochemical evaluation
210
Surface modification of aluminum by toluene plasma at low-pressure and its surface properties
211
Surface modification of aluminum foil and PTFE film by graft polymerization for adhesion enhancement
212
Surface modification of aluminum using ion nitriding and barrel nitriding
213
Surface modification of aluminum using ion nitriding and fluidized bed
214
Surface modification of aluminum with tin oxide coating
215
Surface modification of Al–Zn–Mg aluminum alloy using the combined process of EDM with USM
216
Surface modification of amorphous substrates by disulfide derivatives: A photo-assisted route to direct functionalization of chalcogenide glasses
217
Surface modification of an epoxy resin with polyamines via cyanuric chloride coupling
218
Surface modification of an experimental silicone rubber maxillofacial material to improve wettability
219
Surface modification of an organosilane self-assembled monolayer on silicon substrates using atomic force microscopy: scanning probe electrochemistry toward nanolithography
220
Surface modification of an organosilane self-assembled monolayer on silicon substrates using atomic force microscopy: scanning probe electrochemistry toward nanolithography
221
Surface modification of an organosilane self-assembled monolayer on silicon substrates using atomic force microscopy: scanning probe electrochemistry toward nanolithography
222
Surface modification of and selective protein attachment to a flexible microarray pattern using atmospheric plasma with a reactive gas
223
Surface modification of Angora rabbit fibers using dielectric barrier discharge
224
Surface modification of anodized Mg in ammonium hydrogen fluoride by various voltages
225
Surface modification of APA-TFC membrane with quaternary ammonium cation and salicylaldehyde to improve performance
226
Surface modification of aramid fiber by air DBD plasma at atmospheric pressure with continuous on-line processing
227
Surface modification of aramid fibres by graphene oxide nano-sheets for multiscale polymer composites
228
Surface modification of argon/oxygen plasma treated vulcanized ethylene propylene diene polymethylene surfaces for improved adhesion with natural rubber
229
Surface Modification of Asymmetric Polysulfone Membrane by UV Irradiation
230
Surface modification of austenitic stainless steel with plasma nitriding for biomedical applications
231
Surface modification of bacterial cellulose by nitrogen-containing plasma for improved interaction with cells
232
Surface modification of BaTiO3 particles by silane coupling agents in different solvents and their effect on dielectric properties of BaTiO3/epoxy composites
233
Surface modification of beta-tricalcium phosphate scaffolds with topological nanoapatite coatings
234
Surface modification of bi-axially expanded poly(tetrafluoroethylene) by plasma polymerization of ethylene
235
Surface modification of biaxially oriented polypropylene (BOPP) film using acrylic acid-corona treatment: Part I. Properties and characterization of treated films
236
Surface modification of biaxially oriented polypropylene (BOPP) film using acrylic acid-corona treatment: Part II. Long term aging surface properties
237
Surface modification of bioactive glass nanoparticles and the mechanical and biological properties of poly(l-lactide) composites
238
Surface modification of biodegradable polyesters with fatty acid conjugates for improved drug targeting
239
Surface modification of biodegradable porous Mg bone scaffold using polycaprolactone/bioactive glass composite
240
Surface modification of biomaterial embedded with pits using die sinker machine
241
Surface modification of biomaterials by plasma immersion ion implantation
242
Surface modification of biphasic calcium phosphate bioceramic powders
243
Surface modification of bisphenol A polycarbonate using an ultraviolet laser with high-speed, direct-writing technology
244
Surface Modification of BiVO4 Using (3-Aminopropyl) Triethoxysilane and Study of the Photocatalytic Properties and Process Optimization
245
Surface modification of bone char for removal of formaldehyde from air
246
Surface modification of boron nitride in hydrogen plasma
247
Surface modification of bovine bone ash prepared by milling and acid washing process
248
Surface modification of bulk n-InAs (111)A etched in bromine–methanol
249
Surface modification of CaCO3 nanoparticles by alkylbenzene sulfonic acid surfactant
250
Surface modification of CaF2 in atomic layer scale by electron beam exposure
251
Surface modification of calcined kaolin with toluene diisocyanate based on high energy ball milling
252
Surface modification of calcite by wet-stirred ball milling and its properties
253
Surface modification of calcium carbonate nanofillers by fluoro- and alkyl-alkoxysilane: Consequences on the morphology, thermal stability and gas barrier properties of polyvinylidene fluoride nanocomposites
254
Surface modification of calcium fluoro and hydroxyapatite by 1-octylphosphonic dichloride
255
Surface modification of calcium hydroxyapatite by grafting of etidronic acid
256
Surface modification of calcium–copper hydroxyapatites using polyaspartic acid
257
Surface modification of Cameroonian magnetite rich clay with Eriochrome Black T. Application for adsorption of nickel in aqueous solution
258
Surface modification of CaO–Al2O3–SiO2 glass by dissolution of aluminum and silicon components into alkali hydrothermal medium
259
Surface modification of carbon anodes for secondary lithium battery by fluorination
260
Surface modification of carbon black by anodic oxidation and electrochemical characterization Original Research Article
261
Surface modification of carbon black by nitrogen and allylamine plasma treatment for fuel cell electrocatalyst
262
Surface modification of carbon black nanoparticles by dodecylamine: Thermal stability and phase transfer in brine medium
263
Surface modification of carbon blackrelastomer composite by excimer laser ablation
264
Surface modification of carbon microspheres by KMnO4
265
Surface Modification of Carbon Nanotubes as a Key Factor on Rheological Characteristics of Water-Based Drilling Muds
266
Surface modification of carbon nanotubes for enhancing BTEX adsorption from aqueous solutions
267
Surface Modification of Carbon Nanotubes Using Acid Treatment to Enhance Gas Separation Performance of Hybrid Nanocomposite Mixed Matrix Membrane
268
Surface modification of carbon nanotubes with ethylene glycol plasma Original Research Article
269
Surface modification of carbon/carbon composites to improve their wettability by copper Original Research Article
270
Surface modification of carbon/epoxy prepreg using oxygen plasma and its effect on the delamination resistance behavior of carbon/epoxy composites
271
Surface modification of carbonaceous materials and their use in polymer electrolyte fuel cells and hydrogen-air secondary batteries
272
Surface modification of carbons for enhanced electrochemical activity
273
Surface modification of carbons for enhanced electrochemical activity
274
Surface modification of cardiovascular materials and implants
275
Surface modification of cardo polyetherketone ultrafiltration membrane by photo-grafted copolymers to obtain nanofiltration membranes
276
Surface Modification of Cast Iron Containing 6 mass% Aluminum and Its Wear Property
277
Surface modification of cathodes with nanosized amorphous MnO2 coating for high-power application in lithium-ion batteries
278
Surface modification of Ca-α-SiAlON: Eu2+ phosphor particles by SiO2 coating and fabrication of its deposit by electrophoretic deposition (EPD) process
279
Surface modification of cell culture carriers: Routes to anhydride functionalization of polystyrene
280
Surface modification of cellulose by PCL grafts Original Research Article
281
Surface modification of cellulose membranes with zwitterionic polymers for resistance to protein adsorption and platelet adhesion
282
Surface modification of cellulose nanowhisker throughout graft polymerization of 2-ethyl-2-oxazoline
283
Surface modification of cellulose using silane coupling agent
284
Surface modification of cellulose via atmospheric pressure plasma processing in air and ammonia–nitrogen gas
285
Surface modification of cellulose with triazine derivative to improve printability with reactive dyes
286
Surface modification of cellulose with triazine derivative to improve printability with reactive dyes
287
Surface modification of cellulosic fibers using dielectric-barrier discharge
288
Surface modification of cellulosic fibres for multi-purpose TiO2 based nanocomposites
289
Surface modification of cemented carbide by EB polishing
290
Surface modification of cemented carbide using plasma nitriding and metal ion implantation
291
Surface Modification of Ceramic Materials Using Excimer Laser
292
Surface modification of ceramic matrix composites induced by laser treatment
293
Surface modification of ceramic powders by titanate coupling agent for injection molding using partially water soluble binder system
294
Surface modification of ceramics for improved tribological properties
295
Surface modification of ceria nanoparticles and their chemical mechanical polishing behavior on glass substrate
296
Surface modification of chalcogenide glasses by N2 plasma treatment
297
Surface modification of chitosan films.: Effects of hydrophobicity on protein adsorption Original Research Article
298
Surface modification of chitosan for selective surface–protein interaction
299
Surface modification of chromatography adsorbents by low temperature low pressure plasma
300
Surface modification of CIGS film by annealing and its effect on the band structure and photovoltaic properties of CIGS solar cells
301
Surface modification of Cl-adsorbed Si(1 1 1)-7 × 7 by the irradiation of infrared pulsed laser
302
Surface modification of clay minerals
303
Surface modification of clays and clay–rubber composite
304
Surface modification of CNTs and enhanced photocatalytic activity of TiO2 coated on hydrophilically modified CNTs
305
Surface modification of cobalt–chromium–tungsten–nickel alloy using octadecyltrichlorosilanes
306
Surface modification of coconut-based activated carbon by liquid-phase oxidation and its effects on lead ion adsorption Original Research Article
307
Surface modification of co-evaporated thin films upon oxygen and air exposure
308
Surface modification of coir fibre involving oxidation of lignins followed by reaction with furfuryl alcohol: Characterization and stability
309
Surface modification of commercial aromatic polyamide reverse osmosis membranes by graft polymerization of 3-allyl-5,5-dimethylhydantoin
310
Surface modification of commercial cellulose acetate membranes using surface-initiated polymerization of 2-hydroxyethyl methacrylate to improve membrane surface biofouling resistance
311
Surface modification of commercial polyamide desalination membranes using poly(ethylene glycol) diglycidyl ether to enhance membrane fouling resistance
312
Surface modification of conjugated polymers: an application of near-field optical microscopy in sub-micron photochemistry
313
Surface modification of constructional steels by irradiation with high intensity pulsed nitrogen plasma beams
314
Surface Modification of Copper Current Collector to Improve the Mechanical and Electrochemical Properties of Graphite Anode in Lithium-Ion Battery
315
Surface modification of copper using high intensity, 1015 W/cm2, femtosecond laser in vacuum
316
Surface modification of copper with 2-dodecylpropane-1,3-dithiol: The key effect of the solvent
317
Surface modification of core–shell nanowire with protein adsorption
318
Surface modification of Corynebacterium glutamicum for enhanced Reactive Red 4 biosorption
319
Surface modification of cotton fabric by grafting of polyurethane
320
Surface modification of cotton fabrics for antibacterial application by coating with AgNPs–alginate composite
321
Surface modification of cotton yarn with a DC glow discharge in ambient air
322
Surface modification of CP-Ti to improve the fretting-corrosion resistance: Thermal oxidation vs. anodizing
323
Surface Modification of CTA-FO Membrane by CO2 Plasma Treatment
324
Surface modification of Cu metal particles by the chemical reaction between the surface oxide layer and a halogen surfactant Original Research Article
325
Surface modification of cyclic olefin copolymer substrate by oxygen plasma treatment
326
Surface modification of DF-2 tool steel under the scan of a YAG laser in continuously moving mode
327
Surface modification of diamond-like carbon films to graphene under low energy ion beam irradiation
328
Surface modification of diamond-like carbon films with perfluorooctyl functionalities and their surface properties
329
Surface modification of diamond-like carbon films with protein via polydopamine inspired coatings
330
Surface modification of diatomite using polyaniline
331
Surface modification of doped ZnO thin films
332
Surface modification of Dy2O3–Nb2O5 dope mix for dielectric materials in aqueous dispersion
333
Surface modification of elastomerrcarbon composite by Ndq:YAG laser and KrF excimer laser ablation
334
Surface modification of electrical contacts by cold gas dynamic spraying process
335
Surface modification of electrospun cellulose acetate nanofibers via RAFT polymerization for DNA adsorption
336
Surface modification of electrospun PLLA nanofibers by plasma treatment and cationized gelatin immobilization for cartilage tissue engineering
337
Surface modification of electrospun polyacrylonitrile nanofiber towards developing an affinity membrane for bromelain adsorption Original Research Article
338
Surface modification of electrospun spherical activated carbon for a high-performance biosensor electrode
339
Surface modification of epoxy resin by polyether–polydimethylsiloxanes–polyether triblock copolymers
340
Surface modification of EVA copolymer by UV treatment
341
Surface modification of exchange-coupled Co/NiOx magnetic bilayer by bias sputtering
342
Surface modification of Fe3O4@SiO2 microsphere by silane coupling agent
343
Surface modification of ferromagnetics for polymer composites
344
Surface modification of fibrillar silicate and its reinforcing mechanism on FS/rubber composites
345
Surface modification of filter medium particles with silane coupling agent KH550
346
Surface modification of fluorinated aluminas: Application of solid state NMR spectroscopy to the study of acidity and surface structure
347
Surface modification of fluorosilicone acrylate RGP contact lens via low-temperature argon plasma
348
Surface modification of fly ash - characterisation and evaluation as reinforcing filler in polyisoprene
349
Surface modification of fly ash - characterisation and evaluation as reinforcing filler in polyisoprene
350
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
351
Surface modification of GaAs during argon ionic cleaning and nitridation: EELS, EPES and XPS studies
352
Surface modification of gas diffusion layers by inorganic nanomaterials for performance enhancement of proton exchange membrane fuel cells at low RH conditions
353
Surface Modification of Glassy Carbon Electrode by Ni-Cu Nanoparticles as a Competitive Electrode for Ethanol Electro-Oxidation
354
Surface modification of goethite by phosphate for enhancement of Cu and Cd adsorption
355
Surface modification of gold nanoparticles and their monolayer behavior at the air/water interface
356
Surface modification of gold nanoparticles with 6- mercapto-1-hexanol to facilitate dual conjugation of protoporphyrin IX and folic acid for improving the targeted photochemical internalization
357
Surface modification of gold nanorods using layer-by-layer technique for cellular uptake
358
Surface modification of gold nanotubules via microwave radiation, sonication and chemical etching
359
Surface modification of graphene and graphite by nitrogen plasma: Determination of chemical state alterations and assignments by quantitative X-ray photoelectron spectroscopy
360
Surface modification of graphite anodes by combination of high temperature gas treatment and silylation in nonaqueous solution
361
Surface modification of graphite by coke coating for reduction of initial irreversible capacity in lithium secondary batteries
362
Surface modification of graphitized carbonaceous materials by electropolymerization of thiophene and their effects on electrochemical properties Original Research Article
363
Surface modification of g-TiAl alloys by acetylene plasma deposition
364
Surface modification of hafnia with polyelectrolytes based on the spin-coating electrostatic self-assembly method
365
Surface modification of halogenated polymers. 4. Functionalisation of poly(tetrafluoroethylene) surfaces by diazonium salts
366
Surface modification of halogenated polymers. 6. Graft copolymerization of poly(tetrafluoroethylene) surfaces by polyacrylic acid
367
Surface modification of halogenated polymers. 9. Etching of polytetrafluoroethylene with the scanning electrochemical microscope
368
Surface modification of halogenated polymers: 5. Localized electroless deposition of metals on poly(tetrafluoroethylene) surfaces
369
Surface modification of hard alloy by Y ion implantation under different atmosphere
370
Surface modification of Hastelloy C-276 by SiC addition and electron beam melting
371
Surface modification of heterogeneous cation exchange membrane through simultaneous using polymerization of PAA and multi walled carbon nano tubes
372
Surface modification of high calcium fly ash for its application in oil spill clean up
373
Surface modification of high heat resistant UV cured polyurethane dispersions
374
Surface modification of high performance PBO fibers using radio frequency argon plasma
375
Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints
376
Surface modification of highly oriented pyrolytic graphite by reaction with atomic nitrogen at high temperatures
377
Surface modification of high-performance polymeric fibers by an oxygen plasma. A comparative study of poly(p-phenylene terephthalamide) and poly(p-phenylene benzobisoxazole)
378
Surface modification of high-speed steel by intense pulsed ion beam irradiation
379
Surface modification of HMS material with silica sol leading to a remarkable enhanced catalytic performance of Cu/SiO2
380
Surface modification of HSA containing magnetic PLGA nanoparticles by poloxamer to decrease plasma protein adsorption
381
Surface modification of hydroturbine steel using friction stir processing
382
Surface modification of hydroxyapatite nanoparticles by poly(l-phenylalanine) via ROP of l-phenylalanine N-carboxyanhydride (Pha-NCA)
383
Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRP
384
Surface modification of hydroxyapatite. Part I. Dodecyl alcohol
385
Surface modification of hydroxyapatite. Part II. Silica
386
Surface modification of III–V semiconductors: chemical processes and electronic properties
387
Surface modification of imide containing polymers I: Catalytic groups
388
Surface modification of imide containing polymers II: Co-reactive groups
389
Surface modification of indium tin oxide anode with self-assembled monolayer modified Ag film for improved OLED device characteristics
390
Surface modification of indium tin oxide films by amino ion implantation for the attachment of multi-wall carbon nanotubes
391
Surface modification of indium tin oxide films with Au ions implantation: Characterization and application in bioelectrochemistry
392
Surface modification of indium tin oxide films with NH2+ ion implantation: Surface properties and gold nanoparticles attachment
393
Surface modification of inorganic layer compound with organic compound and preparation of thin films
394
Surface modification of investment cast-316L implants: Microstructure effects
395
Surface modification of ion exchange membrane using amines
396
Surface modification of iron containing aluminum alloys by treatment with copper plasma produced with cathodic arc
397
Surface modification of iron particles with polystyrene and surfactants under high-energy ball milling
398
Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites
399
Surface modification of La0.3Sr0.7CoO3−δ ceramic membranes
400
Surface modification of laser ablated YBCO target
401
Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds
402
Surface modification of LDPE by a DC corona discharge generated in a point-to-grid system: the influence of geometric parameters of the system on modification power
403
Surface modification of LDPE film by CO2 pulsed laser irradiation
404
Surface modification of lead silicate glass under X-ray irradiation
405
Surface modification of Lexan treated by RF plasma
406
Surface modification of Li[Li0.2Ni0.2Mn0.6]O2 nanoparticles with polydopamine-assisted MgF2 coating
407
Surface modification of Li1.03Mn1.97O4 spinels for improved capacity retention
408
Surface modification of LiCoO2 with Li3xLa2/3−xTiO3 for all-solid-state lithium ion batteries using Li2S–P2S5 glass–ceramic
409
Surface modification of LiMn2O4 thin films at elevated temperature
410
Surface modification of LiNi0.8Co0.2O2 with La2O3 for lithium-ion batteries
411
Surface modification of LiNi1/2Mn3/2O4 thin-films by zirconium alkoxide/PMMA composites and their effects on electrochemical properties
412
Surface modification of lipid nanocapsules with polysaccharides: From physicochemical characteristics to in vivo aspects
413
Surface modification of low and high temperature co-fired ceramics for enzymatic microreactor fabrication
414
Surface modification of low carbon steel substrate by Al-rich clad layer applied by GTAW
415
Surface modification of low cost carbons for their application in the environmental protection
416
Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment
417
Surface modification of lyocell fibres by graft copolymerization of thermo-sensitive poly-N-isopropylacrylamide
418
Surface modification of macroporous glycidyl methacrylate based copolymers for selective sorption of heavy metals
419
Surface modification of magnesium alloys using triazine dithiols
420
Surface modification of magnesium aluminum hydroxide nanoparticles with poly(methyl methacrylate) via one-pot in situ polymerization
421
Surface modification of magnetic metal nanoparticles through irradiation graft polymerization
422
Surface Modification of Magnetic MnFe2O4@SiO2 Core-shell Nanoparticles with deposited Layer of 3-Aminopropyl Triethoxysilane
423
Surface Modification of Magnetic Nanoparticles Using Gum Arabic
424
Surface modification of magnetic nanoparticles with oleylamine and gum Arabic
425
Surface modification of magnetite nanoparticles using gluconic acid and their application in immobilized lipase
426
Surface modification of magnetite nanoparticles using lactobionic acid and their interaction with hepatocytes
427
Surface modification of magnetron-sputtered hydroxyapatite thin films via silicon substitution for orthopaedic and dental applications
428
Surface modification of maize starch films by low-pressure glow 1-butene plasma
429
Surface modification of MAl2O4:Eu2+,Dy3+ (M = Sr, Ca, Ba) phosphors to enhance water resistance by combustion method
430
Surface modification of M-Ba-ferrite powders by polyaniline: Towards improving microwave electromagnetic response
431
Surface modification of m-BiVO4 with wide band-gap semiconductor BiOCl to largely improve the visible light induced photocatalytic activity
432
Surface modification of membranes for the separation of volatile organic compounds from water by pervaporation Original Research Article
433
Surface modification of mesoporous membranes by fluoro-silane coupling reagent for CO2 separation
434
Surface Modification of Mesoporous Nanosilica with [3-(2-Aminoethylamino) propyl] trimethoxysilaneand Its Application in Drug Delivery
435
Surface modification of metal alloys by plasma immersion ion implantation and subsequent plasma nitriding
436
Surface modification of Mg67–Zn30–Y3 quasicrystal alloy by high current pulsed electron beam
437
Surface modification of mica due to titanium sputtering as studied by positron annihilation
438
Surface modification of micro- and nanocarriers for anticancer, anti-diabetic, antimicrobial, and anti-neurodegenerative applications: PEGylation strategy
439
Surface modification of microfibrillated cellulose for epoxy composite applications
440
Surface modification of microporous polypropylene membranes by the grafting of poly(γ-stearyl-l-glutamate)
441
Surface modification of microporous polyurethane membrane with poly(ethylene glycol) to develop a novel membrane
442
Surface modification of microporous PVDF membranes by ATRP
443
Surface modification of microporous PVDF membranes for neuron culture
444
Surface Modification of Mild Steel Using Tungsten Inert Gas Torch Surface Cladding
445
Surface modification of Mitoxantrone-loaded PLGA nanospheres with chitosan
446
Surface modification of monodisperse hydroxyl functionalized polymeric microspheres using ceric ammonium nitrate
447
Surface Modification of Multilayer Coatings Ti-Al-Cr and Hydroxyapatite on Calcium Phosphate Cement with Sol-Gel Method
448
Surface modification of multi-walled carbon nanotubes by a sol–gel reaction to increase their compatibility with PMMA resin
449
Surface modification of multi-walled carbon nanotubes by O2 plasma
450
Surface modification of multi-walled carbon nanotubes using 3-aminopropyltriethoxysilane
451
Surface modification of nano-apatite by grafting organic polymer
452
Surface modification of nanocast ordered mesoporous carbons through a wet oxidation method Original Research Article
453
Surface modification of nanocolloidal silica for use as polishing abrasive particles
454
Surface modification of nanocomposite ceramic membranes by PDMS for condensable hydrocarbons separation Original Research Article
455
Surface modification of nanocrystalline anatase with CTAB in the acidic condition and its effects on photocatalytic activity and preferential growth of TiO2
456
Surface modification of nanocrystalline calcium phosphate bioceramic by low energy nitrogen ion implantation
457
Surface modification of nanofibrous poly(acrylonitrile-co-acrylic acid) membrane with biomacromolecules for lipase immobilization
458
Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering
459
Surface modification of nanofiltration membranes by ion implantation
460
Surface modification of nanofiltration membranes to improve the removal of organic micro-pollutants (EDCs and PhACs) in drinking water treatment: Graft polymerization and cross-linking followed by functional group substitution
461
Surface modification of nanophase hydroxyapatite with chitosan
462
Surface modification of nano-porous anodic alumina membranes and its use in electroosmotic flow
463
Surface modification of nanoporous materials for electric double layer capacitors application
464
Surface modification of nanosheet oxide photocatalysts
465
Surface modification of nanosilica with 3-mercaptopropyl trimethoxysilane: Experimental and theoretical study on the surface interaction
466
Surface modification of nano-SiO2 particles using polyaniline
467
Surface modification of nano-sized HZSM-5 and HFER by pre-coking and silanization
468
Surface modification of nanostructured ceramic membranes for direct contact membrane distillation
469
Surface modification of nano-TiO2 with trimellitylimido-amino acid-based diacids for preventing aggregation of nanoparticles
470
Surface modification of natural graphite particles for lithium ion batteries
471
Surface modification of natural halloysite clay nanotubes with aminosilanes. Application as catalyst supports in the atom transfer radical polymerization of methyl methacrylate Original Research Article
472
Surface modification of natural leather using low-pressure parallel plate plasma
473
Surface modification of natural Na-montmorillonite in alkane solvents using a quaternary ammonium surfactant
474
Surface modification of natural rubber by TiO2 film
475
Surface modification of natural rubber film by polymerisation of methyl methacrylate in water-based system
476
Surface modification of natural rubber latex films by graft copolymerization
477
Surface modification of natural zeolite by chitosan and its use for nitrate removal in cold regions
478
Surface modification of Ni catalysts with trace Pd and Rh for oxidative steam reforming of methane Original Research Article
479
Surface modification of Ni catalysts with trace Pt for oxidative steam reforming of methane
480
Surface modification of Ni/Al2O3 with Pt: Highly efficient catalysts for H2 generation via selective decomposition of hydrous hydrazine
481
Surface modification of nickel hydroxide particles by micro-sized cobalt oxide hydroxide and properties as electrode materials
482
Surface modification of NiTi alloy with tantalum to improve its biocompatibility and radiopacity
483
Surface modification of NiTi by plasma based ion implantation for application in harsh environments
484
Surface modification of NiTi for orthopaedic braces by plasma immersion ion implantation
485
Surface modification of NiTi/PZT heterostructure thin films using various protective layers for potential MEMS applications
486
Surface modification of nodular cast iron: A comparative study on graphite elimination
487
Surface modification of nonporous glass beads with chitosan and their adsorption property for transition metal ions
488
Surface modification of non-woven fabric by DC pulsed plasma treatment and graft polymerization with acrylic acid
489
Surface modification of oil fly ash and its application in selective capturing of carbon dioxide
490
Surface modification of OPC-based cement using a frequency doubled Nd:YAG laser system
491
Surface modification of P(EMA-co-HEA)/SiO2 nanohybrids for faster hydroxyapatite deposition in simulated body fluid?
492
Surface modification of paclitaxel-loaded polymeric nanoparticles: Evaluation of in vitro cellular behavior and in vivo pharmacokinetic
493
Surface modification of paper and cellulose by plasma-assisted deposition of fluorocarbon films
494
Surface modification of PDMS by atmospheric-pressure plasma-enhanced chemical vapor deposition and analysis of long-lasting surface hydrophilicity
495
Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate
496
Surface modification of PDMS using atmospheric glow discharge polymerization of tetrafluoroethane for immobilization of biomolecules
497
Surface modification of PE film by DBD plasma in air
498
Surface modification of PE porous membranes based on the strong adhesion of polydopamine and covalent immobilization of heparin
499
Surface modification of Penicillium chrysogenum mycelium for enhanced anionic dye removal
500
Surface modification of perfluorosulfonic acid membranes with perfluoroheptane (C7F16)/argon plasma
501
Surface modification of PET film by a DBD device at atmospheric pressure
502
Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization
503
Surface modification of piezoelectric aluminum nitride with functionalizable organosilane adlayers
504
Surface modification of pitch-based spherical activated carbon by CVD of NH3 to improve its adsorption to uric acid
505
Surface modification of plastic, glass and titanium by photoimmobilization of polyethylene glycol for antibiofouling
506
Surface modification of plasticized PVC by dry cleaning methods: Consequences for artworks
507
Surface modification of platinum quartz crystal microbalance by controlled electroless deposition of gold nanoparticles and its enhancing effect on the HS-DNA immobilization
508
Surface modification of PLGA nanoparticles via human serum albumin conjugation for controlled delivery of docetaxel
509
Surface modification of PLGA/β-TCP scaffold for bone tissue engineering: Hybridization with collagen and apatite
510
Surface modification of PMMA by DC glow discharge and microwave plasma treatment for the improvement of coating adhesion
511
Surface modification of PMMA polymer in the interaction with oxygen-argon RF plasma
512
Surface modification of PMMA/O-MMT composite microfibers by TiO2 coating
513
Surface modification of poly(acrylonitrile-co-maleic acid) membranes by the immobilization of poly(ethylene glycol)
514
Surface modification of poly(amidoamine) (PAMAM) dendrimer as antimicrobial agents
515
Surface modification of poly(dimethylsiloxane) by atmospheric pressure high temperature plasma torch to prepare high-performance gas separation membranes
516
Surface modification of poly(dimethylsiloxane) by two-step plasma treatment for further grafting with chitosan–Rose Bengal photosensitizer
517
Surface modification of poly(dimethylsiloxane) for microfluidic assay applications
518
Surface modification of poly(dimethylsiloxane) microchips using a double-chained cationic surfactant for efficiently resolving fluorescent dye adsorption
519
Surface modification of poly(ethylene terephthalate) (PET) by magnet enhanced dielectric barrier discharge air plasma
520
Surface modification of poly(ethylene terephthalate) fabric via photo-chemical reaction of dimethylaminopropyl methacrylamide
521
Surface modification of poly(ethylene terephthalate) fibers induced by radio frequency air plasma treatment
522
Surface modification of poly(ethylene-co-vinyl alcohol): hydroxyapatite immobilization and control of periodontal ligament cells differentiation
523
Surface modification of poly(hydroxybutyrate) films to control cell–matrix adhesion
524
Surface modification of poly(lactide-co-glycolide) nanoparticles by d-α-tocopheryl polyethylene glycol 1000 succinate as potential carrier for the delivery of drugs to the brain
525
Surface modification of poly(l-lactic acid) to improve its cytocompatibility via assembly of polyelectrolytes and gelatin
526
Surface modification of poly(l-lactide) electrospun fibers with nanocrystal hydroxyapatite for engineered scaffold applications
527
Surface modification of poly(oligoethylene oxide methacrylate) for resisting protein adsorption
528
Surface modification of poly(propylene carbonate) by aminolysis and layer-by-layer assembly for enhanced cytocompatibility
529
Surface modification of poly(propylene carbonate) by oxygen ion implantation
530
Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)
531
Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via UV-induced graft polymerization of N-vinyl pyrrolidone
532
Surface modification of poly(tetrafluoroethylene) by excimer laser processing: enhancement of adhesion
533
Surface modification of poly(tetrafluoroethylene) by saddle field fast atom beam source
534
Surface modification of poly(tetrafluoroethylene) films by plasma polymerization of glycidyl methacrylate for adhesion enhancement with evaporated copper
535
Surface modification of poly(tetrafluoroethylene) films via plasma treatment and graft copolymerization of acrylic acid Original Research Article
536
Surface modification of poly(tetramethylene adipate-co-terephthalate) membrane via layer-by-layer assembly of chitosan and dextran sulfate polyelectrolyte multiplayer
537
Surface modification of poly(vinylidene fluoride) by alkaline treatment Part 2. Process modification by the use of phase transfer catalysts
538
Surface modification of poly(vinylidene fluoride) film by remote Ar, H2, and O2 plasmas
539
Surface modification of poly(vinylidenefluoride) to improve the osteoblast adhesion
540
Surface modification of poly(ε-caprolactone) using a dielectric barrier discharge in atmospheric pressure glow discharge mode
541
Surface modification of poly[2-methoxy,5-(2-ethyl-hexyloxy)-1,4-phenylenevinylene] in the optical near field
542
Surface modification of polyacrylonitrile fiber for immobilization of antibodies and detection of analyte Original Research Article
543
Surface modification of polyacrylonitrile film by anchoring conductive polyaniline and determination of uricase adsorption capacity and activity
544
Surface modification of polyacrylonitrile nanofibrous membranes with superior antibacterial and easy-cleaning properties through hydrophilic flexible spacers
545
Surface modification of polyacrylonitrile-based carbon fiber and its interaction with imide
546
Surface modification of polyamide 66 fabric by microwave induced grafting with 2-hydroxyethyl methacrylate
547
Surface modification of polyamide fibers and films using atmospheric plasmas
548
Surface modification of polyaniline film by grafting of poly(ethylene glycol) for reduction in protein adsorption and platelet adhesion
549
Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering
550
Surface modification of polycaprolactone with poly(methacrylic acid) and gelatin covalent immobilization for promoting its cytocompatibility
551
Surface modification of polycrystalline iron surfaces by n-dodecanethiol: an XPS investigation
552
Surface modification of polydimethylsiloxane with photo-grafted poly(ethylene glycol) for micropatterned protein adsorption and cell adhesion
553
Surface modification of polyester fabric by corona discharge irradiation
554
Surface modification of polyester fabrics for inkjet printing with atmospheric-pressure air/Ar plasma
555
Surface modification of polyester to produce a bacterial cellulose-based vascular prosthetic device
556
Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)–polyurethane–methoxyl poly(ethylene glycol)
557
Surface modification of polyethersulfone ultrafiltration membranes by corona air plasma for separation of oil/water emulsions
558
Surface modification of polyethersulfone ultrafiltration membranes by corona plasma-assisted coating TiO2 nanoparticles
559
Surface modification of polyethylene balloon catheters for local drug delivery
560
Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy
561
Surface modification of polyethylene film by acrylamide graft and alcoholysis for improvement of antithrombogenicity
562
Surface modification of polyethylene for improving the adhesion of a highly fluorinated UV-cured coating
563
Surface modification of polyethylene terephthalate by plasma immersion ion implantation
564
Surface modification of polyethylene terephthalate with albumin and gelatin for improvement of anticoagulation and endothelialization
565
Surface modification of polyethyleneterephthalate by an atmospheric-pressure plasma source
566
Surface modification of polyimide (PI) film using water cathode atmospheric pressure glow discharge plasma
567
Surface modification of polyimide alignment films by ion beams for liquid crystal displays
568
Surface modification of polyimide film by coupling reaction for copper metallization
569
Surface modification of polyimide films using unipolar nanosecond-pulse DBD in atmospheric air
570
Surface modification of polyimide films via plasma polymerization and deposition of allylpentafluorobenzene
571
Surface modification of polyimide membranes by diethylenetriamine (DETA) vapor for H2 purification and moisture effect on gas permeation
572
Surface modification of polyimide using dielectric barrier discharge treatment
573
Surface modification of poly-l-lactic acid fibrous scaffolds by a molecular-designed multi-walled carbon nanotube multilayer for enhancing cell interactions Original Research Article
574
Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet
575
Surface modification of polymer latex particles by AGET ATRP of a styrene derivative bearing a lactose residue
576
Surface modification of polymer nanofibres by plasma treatment
577
Surface modification of polymer using AC-pulsed plasma: Optimization of the electrical parameters and characterization by contact angle and probe-tack tests
578
Surface modification of polymer-based microfluidic devices Original Research Article
579
Surface modification of polymeric blends by nitrogen plasma implantation
580
Surface modification of polymeric microspheres using glycopolymers for biorecognition
581
Surface modification of polymers by plasma treatments for the enhancement of biocompatibility and controlled drug release
582
Surface modification of polymers VII.: Photochemical grafting of acrylamide and N-isopropylacrylamide onto polyethylene initiated by anthraquinone-2-sulfonate adsorbed at the surface of the polymer
583
Surface modification of polymethyl methacrylate intraocular lenses by plasma for improvement of antithrombogenicity and transmittance
584
Surface modification of polypropylene and compatibilization of interfaces in incompatible blends of polypropylene with polystyrene by plasma of CO2
585
Surface modification of polypropylene films by chitosan and chitosan/pectin multilayer
586
Surface modification of polypropylene macroporous membrane by marrying RAFT polymerization with click chemistry
587
Surface modification of polypropylene macroporous membrane to improve its antifouling characteristics in a submerged membrane-bioreactor: H2O plasma treatment
588
Surface modification of polypropylene membrane by polyethylene glycol graft polymerization
589
Surface modification of polypropylene membranes by γ-ray induced graft copolymerization and their solute permeation characteristics
590
Surface modification of polypropylene microfiltration membrane via entrapment of an amphiphilic alkyl oligoethyleneglycolether
591
Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone
592
Surface modification of polypropylene microfiltration membranes by the immobilization of poly(N-vinyl-2-pyrrolidone): a facile plasma approach
593
Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: Air plasma treatment
594
Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: N2 plasma treatment
595
Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment
596
Surface modification of polypropylene non-woven fabric using atmospheric nitrogen dielectric barrier discharge plasma
597
Surface modification of polypropylene using argon plasma: Statistical optimization of the process variables
598
Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture
599
Surface Modification of Polypropylene Yarns with SiO2 Sol-Gel: A Novel Approach to Enhance Thermal and Hydrophilic Properties for Depth Filter Applications
600
Surface modification of polypyrrole films via grafting of poly(ethylene glycol) for improved biocompatibility
601
Surface Modification of Polystyrene Beads by Ultraviolet/Ozone Treatment and its Effect on Gelatin Coating
602
Surface modification of polystyrene particles for specific antibody adsorption
603
Surface modification of polystyrene with atomic oxygen radical anions-dissolved solution
604
Surface modification of polysulfone ultrafiltration membrane by oxygen plasma treatment
605
Surface modification of polytetrafluoroethylene by microwave plasma treatment of H2O/Ar mixture at low pressure
606
Surface modification of polytetrafluoroethylene by nitrogen ion implantation
607
Surface modification of polytetrafluoroethylene for adhesive bonding
608
Surface modification of polytetrafluoroethylene membranes by radio frequency methane/nitrogen mixture plasma polymerization
609
Surface modification of polytetrafluoroethylene using atmospheric pressure plasma jet for medical application
610
Surface modification of polyurethane and silicone for therapeutic medical technics by means of electron beam
611
Surface modification of polyurethane films by plasma and ultraviolet light to improve haemocompatibility for artificial heart valves
612
Surface modification of polyurethane membranes using acrylic acid vapour plasma and its effects on the pervaporation processes
613
Surface modification of polyurethane membranes using RF-plasma treatment with polymerizable and non-polymerizable gases
614
Surface modification of polyvalent element-containing glasses
615
Surface modification of polyvinylidene fluoride-co-hexafluoropropylene (PVDF–HFP) hollow fiber membrane for membrane gas absorption
616
Surface modification of porous antireflective coatings for solar glass covers
617
Surface modification of porous poly(tetrafluoraethylene) film by a simple chemical oxidation treatment
618
Surface modification of porous poly(tetrafluoroethylene) film via cold plasma treatment
619
Surface modification of PP under different electrodes of DC glow discharge and its physicochemical characteristics
620
Surface modification of precipitated calcium carbonate using aqueous fluosilicic acid
621
Surface modification of pre-sintered BaTiO3 particles
622
Surface modification of protein nanocontainers and their self-directing character in polymer blends
623
Surface modification of PTFE by synchrotron radiation under the O2 gas atmosphere
624
Surface modification of PTFE using an atmospheric pressure plasma jet in argon and argon + CO2
625
Surface modification of pure niobium by plasma nitriding
626
Surface modification of pure titanium by pulsed electron beam
627
Surface modification of pure titanium treated with B4C at high temperature
628
Surface modification of PVDF hollow fiber membrane and its application in membrane aerated biofilm reactor (MABR)
629
Surface modification of PVDF membrane via AGET ATRP directly from the membrane surface
630
Surface modification of PVDF porous membranes via poly(DOPA) coating and heparin immobilization
631
Surface modification of Raw and Frit glazes by non-thermal helium plasma jet
632
Surface modification of recycled carbon fiber and its reinforcement effect on nylon 6 composites: Mechanical properties, morphology and crystallization behaviors
633
Surface modification of resistance welding electrode by electro-spark deposited composite coatings: Part I. Coating characterization
634
Surface modification of resistance welding electrodes by electro-spark deposited composite coatings: Part II. Metallurgical behavior during welding
635
Surface modification of SAE 1070 by chromium using plasma immersion ion implantation and deposition
636
Surface modification of SCM420 steel by plasma electrolytic treatment
637
Surface modification of seawater reverse osmosis (SWRO) membrane using methyl methacrylate-hydroxy poly(oxyethylene) methacrylate (MMA-HPOEM) comb-polymer and its performance Original Research Article
638
Surface modification of self-healing poly(urea-formaldehyde) microcapsules using silane-coupling agent
639
Surface modification of semiconductor photoelectrode for improved solar cell performance
640
Surface modification of sepiolite nanofibers with PEG based compounds to prepare polymer electrolytes
641
Surface modification of several carbon-based materials: comparison between CF4 rf plasma and direct F2-gas fluorination routes
642
Surface modification of several dental substrates by non-thermal, atmospheric plasma brush
643
Surface modification of Si/Ge multi-layers by MeV Si ion bombardment
644
Surface modification of Si/SiO2 by polymeric anion-exchanging membrane: Effect on interfacial morphology and electrochemical properties
645
Surface modification of SiC powders by hydrolysed aluminium coating
646
Surface modification of silica aerogels by hexamethyldisilazane–carbon dioxide mixtures and their phase behavior
647
Surface modification of silica by two-step method and properties of solution styrene butadiene rubber (SSBR) nanocomposites filled with modified silica
648
Surface modification of silica glass by CHF3 plasma treatment and carbon negative-ion implantation for cell pattern adhesion
649
Surface modification of silica membranes in a tubular-type module
650
Surface modification of silica nanoparticles with hydrophilic polymers
651
Surface modification of silica particles assisted by CO2
652
Surface modification of silica particles by dry coating: Characterization and powder ageing
653
Surface modification of silica particles using polyimide
654
Surface modification of silica particles with polyimide by ultrasonic wave irradiation
655
Surface modification of silica: 1. Thermodynamic aspects and effect on elastomer reinforcement
656
Surface modification of silica-coated zirconia by chemical treatments
657
Surface modification of silicate glasses by nanoimprint using nanostriped NiO thin film molds
658
Surface modification of silicon with single ion irradiation
659
Surface Modification of Silicone Rubber Membrane by Microwave Discharge to Improve Biocompatibility
660
Surface modification of silicone sheets and tubes using plasma-based ion implantation
661
Surface modification of SiLK1 by graft copolymerization with 4-vinylpyridine for reduction in copper diffusion
662
Surface modification of single crystal silicon by Ar+ ion implantation and vacuum deposition of amorphous carbon coating
663
Surface modification of SiO2 beads with multiple hydrophobic quantum dots for bioapplications
664
Surface modification of SiO2 nanoparticles for bacterial decontaminations of blood products
665
Surface modification of SnO2 nanoparticles containing Mg or Fe: Effects on sintering
666
Surface modification of sodium caseinate films by zein coatings
667
Surface modification of sol gel TiO2 surface with sputtered metallic silver for Sun light photocatalytic activity: Initial studies
668
Surface modification of sol–gel derived nano zinc oxide (ZnO) and the study of its effect on the properties of styrene–butadiene rubber (SBR) nanocomposites
669
Surface modification of sol–gel synthesized TiO2 nanoparticles induced by La-doping
670
Surface modification of solution combustion synthesized Ni/Al2O3 catalyst for aqueous-phase reforming of ethanol
671
Surface modification of sphalerite with sodium alginate
672
Surface modification of spin-coated high-density polyethylene films by argon and oxygen glow discharge plasma treatments
673
Surface Modification of SPK NL Steel: Relevance to Tribological and Electrochemical Potency
674
Surface modification of spray dried food and emulsion powders with surface-active proteins: A review Review Article
675
Surface Modification of Sputtered Ga.5In.5Sb Thin Films
676
Surface modification of stainless steel by grafting of poly(ethylene glycol) for reduction in protein adsorption
677
Surface modification of stainless steel in plasma environments
678
Surface modification of stainless steel in plasma environments
679
Surface modification of stainless steel powders for microfabrication
680
Surface modification of stainless steels by TEA CO2 laser
681
Surface Modification of Stainless-Steel Membrane using a Closed-Batch iCVD Reactor for Oil/Water Separation
682
Surface modification of steel and cast iron to improve corrosion resistance in molten aluminium
683
Surface modification of steels by complex diffusion saturation in low pressure arc discharge
684
Surface modification of sulfonated poly(ether ether ketone) membranes using Nafion solution for direct methanol fuel cells
685
Surface modification of sulphur prevulcanized natural rubber latex sheet via layer-by-layer assembled PMMA particles
686
Surface modification of superparamagnetic iron nanoparticles with calcium salt of poly(γ-glutamic acid) as coating material
687
Surface modification of superparamagnetic magnetite nanoparticles and their intracellular uptake
688
Surface modification of Sylgard 184 polydimethylsiloxane by 254 nm excimer radiation and characterization by contact angle goniometry, infrared spectroscopy, atomic force and scanning electron microscopy
689
Surface modification of TA2 pure titanium by low energy high current pulsed electron beam treatments
690
Surface modification of the MoSiON phase shift mask to reduce critical dimension variation
691
Surface modification of the nanoparticles by an atmospheric room-temperature plasma fluidized bed
692
Surface modification of the patterned Al6061/SUS304 metal plates using the large electron beam
693
Surface modification of the polyethyleneimine layer on silicone oxide film via UV radiation
694
Surface modification of the pure iron by the pulse plasma nitriding: Application of a kinetic model
695
Surface Modification of the SnO2 Layer Using UV-Ozone in a Perovskite Solar Cell with a Planar Structure
696
Surface modification of the titanium implant using TEA CO2 laser pulses in controllable gas atmospheres – Comparative study
697
Surface modification of the γ-TiAl alloys by the nitridation
698
Surface modification of thermally expandable microspheres by grafting poly(glycidyl methacrylate) using ARGET ATRP
699
Surface modification of thermoplastic poly(vinyl alcohol)/saponite nanocomposites via surface-initiated atom transfer radical polymerization enhanced by air dielectric discharges barrier plasma treatment
700
Surface modification of thermoplastics by atomic layer deposition of Al2O3 and TiO2 thin films
701
Surface modification of thick SiC gradient coatings on doped graphite under long pulse plasma irradiation
702
Surface modification of thin film composite membrane support layers with polydopamine: Enabling use of reverse osmosis membranes in pressure retarded osmosis
703
Surface modification of thin film composite polyamide membrane using atomic layer deposition method
704
Surface modification of thin film composite RO membrane for enhanced anti-biofouling performance
705
Surface modification of thin polyion complex film for surface plasmon resonance immunosensor
706
Surface modification of thin polymeric films by air-plasma or UV-irradiation
707
Surface modification of thin-film composite polyamide reverse osmosis membranes by coating N-isopropylacrylamide-co-acrylic acid copolymers for improved membrane properties
708
Surface modification of thin-film-composite polyamide membranes for improved reverse osmosis performance
709
Surface modification of three-dimensional poly(d,l-lactic acid) scaffolds with baicalin: A histological study
710
Surface modification of Ti dental implants by Nd:YVO4 laser irradiation
711
Surface modification of Ti implants by plasma oxidation in hollow cathode discharge
712
Surface modification of Ti-4Al-2V alloy by nitrogen implantation
713
Surface modification of Ti–6Al–4V alloy using an oxygen glow-discharge plasma to suppress the elution of toxic elements into physiological environment
714
Surface modification of Ti–6Al–4V alloy using laser-assisted deposition of a Ti–Si compound
715
Surface modification of Ti–6Al–4V alloy via friction-stir processing: Microstructure evolution and dry sliding wear performance
716
Surface modification of Ti–6Al–4V alloys using triode plasma oxidation treatments
717
Surface modification of TiAl alloy via current heating technique
718
Surface modification of Ti–Al targets during cathodic arc evaporation
719
Surface modification of TiFe hydrogen storage alloy by metal-organic chemical vapour deposition of palladium
720
Surface modification of tin oxide ultrafine particle thin films
721
Surface modification of Ti–Nb–Zr–Sn alloy by thermal and hydrothermal treatments
722
Surface modification of TiNi alloy through tantalum immersion ion implantation
723
Surface modification of TiO2 (rutile) by metal negative ion implantation for improving catalytic properties
724
Surface modification of TiO2 by a ruthenium(II) polypyridyl complex via silyl-linkage for the sensitized photocatalytic degradation of carbon tetrachloride by visible irradiation
725
Surface modification of TiO2 electrode by various over-layer coatings and O2 plasma treatment for dye sensitized solar cells
726
Surface modification of TiO2 film by iron doping using reactive magnetron sputtering
727
Surface modification of TiO2 nanoparticles and its effect on the properties of fluoropolymer/TiO2 nanocomposite coatings
728
Surface modification of TiO2 nanoparticles by polyaniline
729
Surface modification of TiO2 nanoparticles through plasma polymerization of acrylic acid
730
Surface modification of TiO2 nanoparticles via photocataliticaly induced reaction: Influence of functionality of silane coupling agent
731
Surface modification of TiO2 nanoparticles with silane coupling agents
732
Surface modification of TiO2 nanotubes by low temperature thermal treatment in C2H2 atmosphere
733
Surface modification of titanium alloy orthopaedic implants via novel powder immersion reaction assisted coating nitriding method
734
Surface modification of titanium alloy orthopaedic implants via novel powder immersion reaction assisted coating nitriding method
735
SURFACE MODIFICATION OF TITANIUM ALLOY THROUGH ELECTRICAL DISCHARGE MACHINING (EDM)
736
Surface modification of titanium alloy Ti6Al4V by plasma niobium alloying process
737
Surface modification of titanium by a diffusional carbo-nitriding method Original Research Article
738
Surface modification of titanium by etching in concentrated sulfuric acid
739
Surface modification of titanium by nano-TiO2/HA bioceramic coating
740
Surface modification of titanium by nitrogen ion implantation
741
Surface modification of titanium by nitrogen ion implantation
742
Surface modification of titanium membrane by chemical vapor deposition and its electrochemical self-cleaning
743
Surface modification of titanium oxide nanocrystals with PEG
744
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
745
Surface modification of tool steel by MOS2 powder shooting
746
Surface modification of tricalcium phosphate for improvement of the interfacial compatibility with biodegradable polymers
747
Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension
748
Surface modification of UHMWPE with infrared femtosecond laser
749
Surface modification of UHMWPE with γ-ray radiation for improving interfacial bonding strength with bone cement (II)
750
Surface modification of ultra high molecular weight polyethylene fibers via the sequential photoinduced graft polymerization
751
Surface modification of ultra thin poly ( -caprolactone) films using acrylic acid and collagen
752
Surface modification of ultrafiltration membranes by preadsorption of a negatively charged polymer: I. Permeation of water soluble polymers and inorganic salt solutions and fouling resistance properties
753
Surface modification of ultrafine precipitated silica with 3-methacryloxypropyltrimethoxysilane in carbonization process
754
Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma
755
Surface modification of vulcanized EPDM rubber by Ag(II): Kinetic study of Ag(II) generation and surface characterization
756
Surface modification of vulcanized styrene–butadiene rubber with trichloroisocyanuric acid solutions of different active chlorine contents
757
Surface modification of W9Cr4V2Mo high-temperature bearing steel by rare earth ion implantation
758
Surface modification of water treatment equipment for reducing CaSO4 scale formation Original Research Article
759
Surface modification of waterborne polyurethane
760
Surface Modification of Wood Fibers Using the Polyelectrolyte Multilayer Technique: Effects on Fiber Joint and Paper Strength Properties
761
Surface modification of Y3Al5O12:Ce3+ phosphor by hydrofluoric acid wet etching
762
Surface modification of zeolite Y and mechanism for reducing naphtha olefin formation in catalytic cracking reaction Original Research Article
763
Surface modification of zinc oxide nanoparticle by PMAA and its dispersion in aqueous system
764
Surface modification of zinc oxide nanorods for potential applications in organic materials
765
Surface modification of zinc-containing hydroxyapatite by tartaric acid
766
Surface modification of Zircaloy-4 substrates with nickel zirconium intermetallics
767
Surface modification of ZnO nanocrystals
768
Surface modification of ZnO nano-particles with Trimetoxyvinyl Silane and Oleic Acid and studying their dispersion in organic media
769
Surface modification of ZnO with Ag improves its photocatalytic efficiency and photostability
770
Surface modification of Zr-based alloys applicable for tritium processing
771
Surface modification of α-alumina support in synthesis of silica membrane for hydrogen purification
772
Surface modification of γ-Al2O3 nano-particles with gum arabic and its applications in adsorption and biodesulfurization
773
Surface modification of γ-Al2O3/TiO2 multilayer membranes for applications in non-polar organic solvents
774
Surface modification of γ-alumina by NaNO2, NaNO3, HNO2, HNO3 and H2SO4: A DFT-D approach
775
Surface modification on a glass surface with a combination technique of sol–gel and air brushing processes
776
Surface modification on highly oriented pyrolytic graphite by slow highly charged ions
777
Surface modification on microfluidic devices with 2-methacryloyloxyethyl phosphorylcholine polymers for reducing unfavorable protein adsorption
778
Surface modification on poly (EGDMA-co-HEMA) synthetic matrices to be used as specific adsorbents
779
Surface modification on polyethylene terephthalate films with 2-methacryloyloxyethyl phosphorylcholine
780
Surface modification on polyurethanes by using bioactive carboxymethylated fungal glucan from Poria cocos
781
Surface modification on silver nanoparticles for enhancing vapor selectivity of localized surface plasmon resonance sensors
782
Surface modification on time-resolved fluorescences of Fe2O3 nanocrystals Original Research Article
783
Surface modification process by electrical discharge machining with a Ti powder green compact electrode
784
Surface modification processes by hypervelocity plasma pulses
785
Surface modification produced by a nitrogen operated plasma focus device: the role of the ion beam in the heating of a substrate
786
Surface modification studies on sulphide minerals using bioreagents
787
Surface modification study of borate materials from B K-edge X-ray absorption spectroscopy
788
Surface modification study of low energy electron beam irradiated polycarbonate film
789
Surface modification technologies IX: Edited by T.S. Sudarshan, W. Reitz and J.J. Stiglich (The Institute of Materials, London, 1996), 608+ pages, $220.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, VT)
790
Surface modification technologies IX: Edited by T.S. Sudarshan, W. Reitz and J.J. Stiglich (The Institute of Materials, London, 1996), 608+ pages, $220.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, VT)
791
Surface Modification Technologies VII: Edited by T. S. Sudarshan, K. Ishizaki, M. Takata, and K. Kamata (The Institute of Materials, London, 1994), 1017 pages, $220.00 (hardback) (available from the Ashgate Publishing Company, Brookfield, VT)
792
surface modification technologies VII: T. S. Sudarshan, Kozo Ishizaki, Masasuke Takata, and Kiichiro Karnata (eds.) (The Institute of Materials, London, 1994), 1003+ pages, $220.00 (available in the U.S.A. from the Ashgate Publishing Company, Brookfield,
793
Surface modification technologies VIII: Edited by T. S. Sudarshan and M. Jeandin (The Institute of Materials, London, 1995), 976 pages, $200.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, Vermont)
794
Surface modification to improve friction and galling properties of forming tools
795
Surface modification using silanated poly(ethylene glycol)s
796
Surface modification with an antithrombin–heparin complex for anticoagulation: Studies on a model surface with gold as substrate
797
Surface modification with both phosphorylcholine and stearyl groups to adjust hydrophilicity and hydrophobicity
798
Surface modification with BSA blocking based on in situ synthesized gold nanoparticles in poly(dimethylsiloxane) microchip
799
Surface modification with cold plasma application on kaolin and its effects on the adsorption of methylene blue
800
Surface modification with EDTA molecule: A feasible method to enhance the adsorption property of ZnO Original Research Article
801
Surface modification with fibronectin or collagen to improve the cell adhesion
802
Surface modification with multiphilic ligands at detectable well defined active positions of nano-object of giant wheel shaped molybdenum blue showing third-order nonlinear optical properties
803
Surface modification with nitrogen-containing plasmas to produce hydrophilic, low-fouling membranes
804
Surface modification with PEG and hirudin for protein resistance and thrombin neutralization in blood contact
805
Surface modification with peptide for enhancing chondrocyte adhesion and cartilage regeneration in porous scaffolds
806
Surface modification with polyethylene glycol–corn trypsin inhibitor conjugate to inhibit the contact factor pathway on blood-contacting surfaces
807
Surface modification with well-defined biocompatible triblock copolymers: Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface
808
Surface Modification With Zinc and Zn-Ni Alloy Compositionally Modulated Multilayer Coatings Original Research Article
809
Surface modification, characterization and adsorptive properties of a coconut activated carbon
810
Surface Modification, Characterization and Photocatlytic Performance of Nano-Sized Titania modified with Silver and Bentonite clay
811
Surface modification, corrugation and nanostructure formation of high speed railway tracks
812
Surface modification/alloying using intense pulsed electron beam as a tool for improving the corrosion resistance of steels exposed to heavy liquid metals
813
Surface modification-assisted bonding of polymer-based microfluidic devices
814
Surface modifications and adhesion of SBS rubber containing calcium carbonate filler by treatment with UV radiation
815
Surface modifications and cell–materials interactions with anodized Ti
816
Surface modifications and deuterium depth profiles in molybdenum irradiated with low-energy D ions
817
Surface modifications and optical variations of (−1 1 1) lattice oriented CuO nanofilms for solar energy applications
818
Surface modifications by gas plasma control osteogenic differentiation of MC3T3-E1 cells
819
Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers Review Article
820
Surface modifications in the chalcopyrite-sulphite ion system, II. Dithiophosphate collector adsorption study
821
Surface modifications in the chalcopyrite-sulphite ion system. I. collectorless flotation, XPS and dissolution study
822
Surface modifications in tribological contacts
823
Surface modifications induced by nanosecond pulsed Nd:YAG laser irradiation of metallic substrates
824
Surface modifications induced by ns and sub-ps excimer laser pulses on titanium implant material
825
Surface modifications induced by pulsed-laser texturing—Influence of laser impact on the surface properties
826
Surface modifications induced by shot peening and their effect on the plane bending fatigue strength of a Cr–Mo steel produced by powder metallurgy
827
Surface modifications induced by the friction of graphites against steel
828
Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance
829
Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance
830
Surface modifications of 316 stainless steel for the improvement of its interface properties with RFGD-deposited fluorocarbon coating
831
Surface modifications of a glass and a glass-ceramic of the MgO-3CaO · P2O5-SiO2 system in a simulated body fluid
832
Surface modifications of a titanium implant by a picosecond Nd:YAG laser operating at 1064 and 532 nm
833
Surface modifications of activated carbon by gamma irradiation
834
Surface modifications of AISI 1045 steel created by high intensity 1064 and 532 nm picosecond Nd:YAG laser pulses
835
Surface modifications of alginate/ poly(L-lysine) microcapsular membranes with poly(ethylene glycol) and poly(vinyl alcohol)
836
Surface modifications of aluminum alloy 5052 for bipolar plates using an electroless deposition process
837
Surface modifications of Al–Zn–Mg alloy using combined EDM with ultrasonic machining and addition of TiC particles into the dielectric
838
Surface modifications of carbon nanotube/polyacrylonitrile composite films by proton beams
839
Surface modifications of crystalline silicon created by high intensity 1064 nm picosecond Nd:YAG laser pulses
840
Surface modifications of EVA copolymers by using RF oxidizing and non-oxidizing plasmas
841
Surface modifications of functional electrodes of a light addressable potentiometric sensor (LAPS): non-dependency of pH sensitivity on the surface functional group
842
Surface modifications of Ga2O3 thin film sensors with Rh, Ru and Ir clusters
843
Surface modifications of gasketless carbon composite bipolar plates for gas tightness of PEM fuel cells
844
Surface modifications of glass-reinforced hydroxyapatite composites
845
Surface modifications of ITO electrodes for polymer light-emitting devices
846
Surface modifications of nanocarriers for effective intracellular delivery of anti-HIV drugs
847
Surface modifications of Nitinol for biomedical applications
848
Surface modifications of photocrosslinked biodegradable elastomers and their influence on smooth muscle cell adhesion and proliferation
849
Surface modifications of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) copolymer by treatment with atmospheric plasma
850
Surface modifications of polypropylene membranes used for blood filtration
851
Surface modifications of TiN coating by the pulsed TEA CO2 and KrCl laser
852
Surface modifications of TiN coating by pulsed TEA CO2 and XeCl lasers
853
Surface modifications of vulcanized SBR rubber by treatment with atmospheric pressure plasma torch
854
Surface modifications of γ-Al2O3, SiO2 and SnO2 supports by titania grafting and their influence in the catalytic combustion of methane
855
Surface modifications on InAs decrease indium and arsenic leaching under physiological conditions
856
Surface modified and functionalized polyaniline and polypyrrole films
857
Surface modified and medicated polyurethane materials capable of controlling microorganisms causing foot skin infection in athletes
858
Surface modified BaTiO3 nanoparticles as the matrix for phospholipids and as extracting probes for LLME of hydrophobic proteins in Escherichia coli by MALDI–MS
859
Surface modified BaTiO3 thick film resistors as H2S gas sensors
860
Surface modified bimetallic catalysts: Preparation, characterization, and applications Review Article
861
Surface modified capillary electrophoresis combined with in solution isoelectric focusing and MALDI-TOF/TOF MS: A gel-free multidimensional electrophoresis approach for proteomic profiling—Exemplified on human follicular fluid
862
Surface modified carbon cloth for use in electrochemical capacitor
863
Surface Modified Carvacrol-rich Satureja khuzestanica Essential Oil Nanoemulsion: A Novel Paclitaxel Formulation Induced Apoptosis on Paclitaxel-Resistant Breast Cancer Cells
864
Surface Modified Cobalt Ferrite Nanoparticles with Cationic Surfactant: Synthesis, Multicomponent Dye Removal Modeling and Selectivity Analysis
865
Surface modified Fe3O4 nanoparticles as a protein delivery vehicle
866
Surface modified fluorescent quantum dots with neurotransmitter ligands for potential targeting of cell signaling applications
867
Surface modified glass beads as model carriers in dry powder inhalers—Influence of drug load on the fine particle fraction
868
Surface modified ground rubber tire by grafting acrylic acid for paving applications
869
Surface modified latex particles: Synthesis and self-assembling into photonic crystals
870
Surface modified long-life electrode for resistance spot welding of Zn-coated steel
871
Surface modified microelectrodes for selective electroanalysis of metal ions in environmental components
872
Surface modified microfiltration membranes with molecularly recognising properties
873
Surface modified multifunctional nanomedicines for simultaneous imaging and therapy of cancer
874
Surface modified multiwalled carbon nanotube based molecularly imprinted polymer for the sensing of dopamine in real samples using potentiometric method
875
Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites
876
Surface modified Nafion® membrane by ion beam bombardment for fuel cell applications
877
Surface modified nano-hydroxyapatite/poly(lactide acid) composite and its osteocyte compatibility
878
Surface Modified Nanomagnetite-Assisted Hollow Fiber Solid/ Liquid Phase Microextraction for Pre-concentration and Determination of Palladium in Water Samples by Differential Pulse Voltammetry
879
Surface modified Ni foam as current collector for syngas solid oxide fuel cells with perovskite anode catalyst
880
Surface modified nonwoven polysulphone (PSU) fiber mesh by electrospinning: A novel affinity membrane
881
Surface modified polymeric membranes to reduce (bio)fouling: a microbiological study using E. coli Original Research Article
882
Surface modified silver selinide nanoparticles as extracting probes to improve peptide/protein detection via nanoparticles-based liquid phase microextraction coupled with MALDI mass spectrometry
883
Surface modified silver-carbonate mixed conducting membranes for high flux CO2 separation with enhanced stability
884
Surface modified tool fabricated by radical nitriding
885
Surface modifying of microporous PTFE capillary for bilirubin removing from human plasma and its blood compatibility
886
Surface moisture and energy exchange from a restored peatland, Québec, Canada
887
Surface molecular diffusion in latex films observed by atomic force microscopy
888
Surface molecular dynamics simulation with two orthogonal surface steps: how to beat the particle conservation problem
889
Surface molecular dynamics simulation with two orthogonal surface steps: how to beat the particle conservation problem
890
Surface molecular orientation of poly(2-vinylnaphalene) thin films: ARUPS and NEXAFS studies
891
Surface molecularly imprinted polymers with synthetic dummy template for simultaneously selective recognition of nine phthalate esters
892
Surface Molecules Essential for Positive Selection Are Retained but Interfered in Thymic Epithelial Cells after Monolayer Culture
893
Surface molybdenizing on titanium by halide-activated pack cementation
894
Surface morphological changes induced in catalysts by acoustic waves
895
Surface morphological features of boulders on Asteroid 25143 Itokawa
896
Surface morphological influence on charging at metal–insulator interface in XPS depth profiling
897
Surface morphological response of crystalline solids to mechanical stresses and electric fields
898
Surface morphological structures and electrochemical activity properties of iridium–niobium binary alloy electrodes
899
Surface morphological studies of green InGaN/GaN multi-quantum wells grown by using MOCVD
900
Surface morphological, mechanical and thermal characterization of electron beam irradiated fibers
901
Surface morphological, microstructural, and electrochromic properties of short-range ordered and crystalline nickel oxide thin films
902
Surface Morphological, Topological and Crystallinity Characteristics of Sputtered BariumStrontium Titanate Thin Films on Sapphire Substrates
903
Surface morphologies and electrical properties of antimony-doped tin oxide films deposited by plasma-enhanced chemical vapor deposition
904
Surface morphologies and floatability of sand-blasted quartz particles
905
Surface morphologies and properties of pure and antimony-doped tin oxide films derived by sol–gel dip-coating processing
906
Surface morphologies due to grooves at moving grain boundaries having stress-driven fluxes
907
Surface morphologies of anthracene single crystals grown from vapor phase
908
Surface morphologies of excimer-laser annealed BF2+ implanted Si diodes
909
Surface morphologies of homoepitaxial ZnO thin films on non-miscut ZnO substrates
910
Surface morphologies of III-V based magnetic semiconductor Ga,Mn/As grown by molecular beam epitaxy
911
Surface morphologies of MOCVD-grown GaN films on sapphire studied by scanning tunneling microscopy
912
Surface morphologies of SnO2(1 1 0)
913
Surface morphologies of spectrally selective and polarization-dependent angular optical reflectors of SnOx:F-coated anodized aluminum
914
Surface morphologies, tribological properties, and formation mechanism of the Ni–CeO2 nanocrystalline coatings on the modified surface of TA2 substrate
915
Surface morphologies—Equilibria and transient states
916
Surface morphology alignment of block copolymers induced by injection molding
917
Surface morphology and calcium control in myocytes from a rat MI model of heart failure
918
Surface morphology and chemical composition of lamb’s lettuce (Valerianella locusta) after exposure to a low-pressure oxygen plasma
919
Surface morphology and chemical ordering in FePd/Pd(0 0 1) thin layers
920
Surface morphology and chemical states of highly oriented PbZrO3 thin ®lms prepared by a sol±gel process
921
Surface morphology and composition of c-, a- and m-sapphire surfaces in O2 and H2 environments
922
Surface morphology and composition of some ‘‘lustro’’ decorated fragments of ancient ceramics from Deruta Central Italy/q
923
Surface morphology and compositional variations in molecular beam epitaxy grown GaNxAs1−x alloys
924
Surface morphology and conductivity of zirconium-doped nanostructured indium oxide films with various crystallographic features
925
Surface morphology and crystal growth mechanism of gibbsite in industrial Bayer liquors
926
Surface morphology and crystalline structure of high-stable polycrystalline transparent conductive zinc oxide films
927
Surface Morphology and Crystallinity of Metal Oxides in Nickel-Cobalt Binary System (Morfologi Permukaan dan Kehabluran Oksida Logam dalam Sistem Biner Nikel-Kobalt)
928
Surface morphology and current–voltage characteristics of monolayer Langmuir–Blodgett films of conjugated organic molecules
929
Surface morphology and deuterium retention in tungsten oxide layers exposed to low-energy, high flux D plasma
930
Surface morphology and dewettability of self-organized thermosets involving epoxy and POSS-capped poly(ethylene oxide) telechelics
931
Surface morphology and electron transport correlation in thin iron films
932
Surface morphology and electronic state characterization of Ni–P amorphous alloy films
933
Surface morphology and electronic structure of Ge/Si(1 1 1) 7 7 system
934
Surface morphology and ferroelectric properties of compositional gradient PZT thin films prepared by chemical solution deposition process
935
Surface morphology and field emission characteristics of carbon nanofiber films grown by chemical vapor deposition on alloy catalyst
936
Surface morphology and Flory–Huggins interaction strength in UCST blend system comprising poly(4-methyl styrene) and isotactic polystyrene
937
Surface morphology and formation of GaAs nanocrystals by laser-induced etching: SEM, PL and Raman studies
938
Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs
939
Surface morphology and helium retention on tungsten exposed to low energy and high flux helium plasma
940
Surface morphology and in vitro release performance of double-walled PLLA/PLGA microspheres entrapping a highly water-soluble drug
941
Surface morphology and in-situ observation on the oxidation behavior of carbon materials by laser microscopy
942
Surface morphology and interaction between water and MgO, CaO and SrO surfaces Periodic HF and DFT calculations
943
Surface morphology and interdiffusion of LiF in Alq3-based organic light-emitting devices
944
Surface morphology and interdiffusion of LiF in Alq3-based organic light-emitting devices
945
Surface morphology and local magnetic properties of electrodeposited thin iron layers
946
Surface morphology and luminescence characterization of β-FeSi2 thin films prepared by pulsed laser deposition
947
Surface morphology and mechanical properties of nanoscale TiAlN/SiNx multilayer coating deposited by reactive magnetron sputtering
948
Surface morphology and mechanical properties of new-generation flowable resin composites for dental restoration
949
Surface morphology and nucleation of infinite-layer (Sr,Ca)CuO2 films on atomically flat SrTiO3 (100) substrates studied by atomic force microscopy
950
Surface morphology and optical properties of ZnO epilayers grown on Si(1 1 1) by metal organic chemical vapor deposition
951
Surface morphology and optical property of 1.3 μm In0.5Ga0.5As/GaAs self-organized quantum dots grown by MBE
952
Surface morphology and pervaporation performance of electric field enhanced multilayer membranes
953
Surface morphology and phase transformations of femtosecond laser-processed sapphire
954
Surface morphology and photoelectric properties of fluorine-doped tin oxide thin films irradiated with 532 nm nanosecond laser
955
Surface morphology and photoluminescence of InAs quantum dots grown on [11~0]-oriented streaked islands under ultra-low V/III ratio
956
Surface morphology and photoluminescence of InAs quantum dots grown on [11~0]-oriented streaked islands under ultra-low V/III ratio
957
Surface morphology and property of UV‑cured flm containing photopolymerizable polysiloxane‑based nanogels with initiating capability
958
Surface morphology and Raman scattering in GaAs/InAs(111) heterostructures grown by MOVPE
959
Surface morphology and Raman scattering in GaAs/InAs(111) heterostructures grown by MOVPE
960
Surface morphology and reaction at Cu/Si interface—Effect of native silicon suboxide
961
Surface morphology and reconstruction changes during heteroepitaxial growth of InAs on GaAs(0 0 1)-(2×4)
962
Surface morphology and reconstruction changes during heteroepitaxial growth of InAs on GaAs(0 0 1)-(2×4)
963
Surface morphology and removal rates for dry- and wet-etched novel resonator materials Part I: La Ga Ta O 3 5.5 0.5 14
964
Surface morphology and removal rates for dry- and wet-etched novel resonator materials Part II. La Ga Nb O 3 5.5 0.5 14
965
Surface morphology and step fluctuations on Ag nanowires
966
Surface morphology and strain relaxation of InAlAs buffer layers grown lattice mismatched on GaAs with inverse steps
967
Surface morphology and structural observation of laser interference crystallized a-Si:Hra-SiN :H multilayers
968
Surface morphology and structure modification of silicon layers induced by nanosecond laser radiation
969
Surface morphology and structure of Ni–P, Ni–P–ZrO2, Ni–W–P, Ni–W–P–ZrO2 coatings deposited by electroless method
970
Surface morphology and structure of the bare and InAs-covered GaAs(3̄ 1̄ 5̄)B surface
971
Surface morphology and the phase formation at Cr/Si system
972
Surface morphology and the response of piezoelectric gas sensors
973
Surface morphology and tribological behavior of AlSi10 alloys treated by plasma immersion ion implantation for automotive applications
974
Surface morphology and tribological properties of DC sputtered nanoscale multilayered TiAlN/CNx coatings
975
Surface morphology and wetting properties of surfaces coated with an amphiphilic diblock copolymer
976
Surface morphology changes due to adsorbates and due to electron bombardment
977
Surface morphology changes during initial usage of hydrophobic, microporous polypropylene membranes
978
Surface morphology changes during Pb deposition on Cu(1 0 0): evidence for surface alloyed Cu(1 0 0)–c(2×2) Pb
979
Surface morphology changes in polythiophene and polythiophene derivative films after being oxidized with iodine. A scanning probe microscopy study
980
Surface morphology changes on silica-coated gold colloids
981
Surface morphology characterization of pentacene thin film and its substrate with under-layers by power spectral density using fast Fourier transform algorithms
982
Surface morphology control of epitaxial silicon films grown by hot wire chemical vapor deposition using hydrogen dilution
983
Surface morphology control of immiscible polymer-blend thin films
984
Surface morphology due to enhanced migration in heteroepitaxial growth of compound semiconductors
985
Surface morphology due to enhanced migration in heteroepitaxial growth of compound semiconductors
986
Surface morphology effects on the light-controlled wettability of ZnO nanostructures
987
Surface morphology evolution and properties of silicon coating on silicon carbide ceramics by advanced plasma source ion plating
988
Surface morphology evolution during electrodeposition of amorphous CoP films
989
Surface morphology evolution of CeO2/YSZ (001) buffer layers fabricated via magnetron sputtering
990
Surface morphology evolution of poly(styrene-block-4-vinylpyridine) (PS-b-P4VP)(H+) and poly(methyl methacrylate)-dibenzo-18-crown-6-poly(methyl methacrylate) (PMCMA) supramolecular film
991
Surface morphology for ion-beam sputtered Al layer with varying sputtering conditions
992
Surface morphology in amorphous Fe–Mo–Cu–B ribbon system
993
Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry fretting
994
Surface morphology manipulation and wear property of bioceramic oxide coatings on titanium alloy
995
Surface morphology of (Hg,Re)Ba/sub 2/CaCu/sub 2/O/sub y/ thin films prepared by pulsed laser deposition
996
Surface morphology of a die-cast Mg alloy
997
Surface morphology of a laser surface nitrided and etched Ti–6Al–4V alloy
998
Surface morphology of active normal faults in hard rock: Implications for the mechanics of the Asal Rift, Djibouti
999
Surface morphology of antiferromagnetic Fe50Mn50 layers on Cu(0 0 1)
1000
Surface morphology of as-deposited and illuminated As–Se chalcogenide thin films
