بر اساس عنوان

1
Preparation of surfactant templated nanoporous silica spherical particles by the Sto¨ber method. Effect of solvent composition on the particle size
2
Preparation of surimi gels from striped mullet (Mugil cephalus) using an optimal level of calcium chloride
3
Preparation of Sustained-Release Matrix Tablets of Aspirin with Ethylcellulose, Eudragit RS100 and Eudragit S100 and Studying the Release Profiles and their Sensitivity to Tablet Hardness
4
Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)
5
Preparation of Symmetrical Tetraphenyl Porphyrin Metal Complexes and Their Spectroscopic Studies
6
Preparation of syn and anti cyclophanes having oligothiophene units and their spectral properties
7
Preparation of syndiotactic polystyrene using the doubly bridged dinuclear titanocenes
8
Preparation of Synthetic Calibration Materials for Use in the Microanalysis of Oxide Minerals by Direct Fusion in High-Purity Graphite Electrodes: Preliminary Results for Quartz and Rutile
9
Preparation of synthetic carbon adsorbents and investigation on porous structure of obtained adsorbents with αs method
10
Preparation of synthetic nanopores with transport properties analogous to biological channels
11
Preparation of synthetic rutile and metal-doped LiFePO4 from ilmenite
12
Preparation of synthetic rutile by hydrochloric acid leaching of mechanically activated Panzhihua ilmenite
13
Preparation of synthetic rutile from pre-treated ilmenite/Ti-rich slag with phenol and resorcinol leaching solutions
14
Preparation of tadpole-shaped calcium alginate microparticles with sphericity control
15
Preparation of tagged glucose as a key intermediate in the synthesis of branched oligosaccharides
16
Preparation of tailor-made starch-based aerogel microspheres by the emulsion-gelation method
17
Preparation of tamarind fruit seed activated carbon by microwave heating for the adsorptive treatment of landfill leachate: A laboratory column evaluation
18
Preparation of tamarind gum based soft ion gels having thixotropic properties
19
Preparation of TaN/C (carbon microcoils)/TaN composite microtubes and TaN microtubes by vapor phase diffusion treatment of carbon microcoils
20
Preparation of TaN/C (carbon microcoils)/TaN composite microtubes and TaN microtubes by vapor phase diffusion treatment of carbon microcoils
21
Preparation of tantalum carbonitride by self-propagating high-temperature synthesis of Ta-C system in nitrogen
22
Preparation of tantalum nanopowders through hydrogen reduction of TaCl5 vapor
23
Preparation of tantalum oxide thin films by photo-assisted atomic layer deposition
24
Preparation of targets by electrodeposition for heavy element studies
25
Preparation of targets by electrodeposition for heavy element studies
26
Preparation of targets by sputter deposition
27
Preparation of targets by sputter deposition
28
Preparation of targets for the gas-filled recoil separator TASCA by electrochemical deposition and design of the TASCA target wheel assembly
29
Preparation of targets for the gas-filled recoil separator TASCA by electrochemical deposition and design of the TASCA target wheel assembly
30
Preparation of tartaric acid modified Raney nickel catalysts: study of modification procedure Original Research Article
31
Preparation of Te nanopowder by vacuum distillation
32
Preparation of telechelic oligomers by thermal degradation of propylene copolymers
33
Preparation of tellurite thin films from tellurium isopropoxide precursor by sol–gel processing
34
Preparation of TEM plan-view and cross-sectional specimens of ZnSe/GaAs epilayers by chemical thinning and argon ion milling
35
Preparation of TEM plan-view and cross-sectional specimens of ZnSe/GaAs epilayers by chemical thinning and argon ion milling
36
Preparation of TEM samples for hard ceramic powders
37
Preparation of TEM samples for hard ceramic powders
38
Preparation of temperature-sensitive microemulsion-based gels formed from a triblock copolymer
39
Preparation of TeO2 based thin films by nonhydrolytic sol–gel process
40
Preparation of ternary I-IV-VI nanocrystallines via a mild solution route
41
Preparation of ternary metal chalcogenide (M1-xFexS, M = Cd and Zn) nanocrystallites using single source precursors
42
Preparation of ternary rare earth sulfide LaxCe2–xS3 as red pigment
43
Preparation of tertiary amides via aryl, heteroaryl, and benzyl organozinc reagents; scope and limitations
44
Preparation of tetra-Boc-protected polymyxin B nonapeptide
45
Preparation of tetracycline microparticles suitable for inhalation administration by supercritical fluid expansion depressurization
46
Preparation of tetrafluorohydrazine from nitrogen trifluoride with iron or iron(II) fluoride
47
Preparation of tetrahydroimidazo[2,1-a]isoquinolines and their use as inhibitors of gastric acid secretion Original Research Article
48
Preparation of textured Ba2NaNb5O15 ceramics by templated grain growth
49
Preparation of textured Bi3TiNbO9 ceramics
50
Preparation of the 14-membered l,l-cycloisodityrosine subunit of RP 66453
51
Preparation of the antithrombotic and antimicrobial coating through layer-by-layer self-assembly of nattokinase-nanosilver complex and polyethylenimine
52
Preparation of the BaTiO3–SiO2 hybrid particles for the catalyst of methane steam reforming process
53
Preparation of the bulk Fe–Al–Ga–P–C–B–Si glassy alloys in a ringed form by copper mold casting
54
Preparation of the bulk Fe–Al–Ga–P–C–B–Si glassy alloys in a ringed form by copper mold casting
55
Preparation of the CdS semiconductor nanofibril by UV irradiation
56
Preparation of the cellulose/silica hybrid containing cationic group by sol–gel crosslinking process and its dyeing properties
57
Preparation of the cellulose/silica hybrid containing cationic group by sol–gel crosslinking process and its dyeing properties
58
Preparation of the composite LaNi3.7Al1.3/Ni–S–Co alloy film and its HER activity in alkaline medium
59
Preparation of the conjugated polyene chains with the 1,4-dimethyl substitution
60
Preparation of the crack-free single phase (Zn1–xCdx)13Sb10 by a gradient freeze method and their structural and thermoelectric properties
61
Preparation of the cubic-type La2O3 phase by thermal decomposition of LaI3
62
Preparation of the egg membrane bandage contained the antibacterial Ag nanoparticles
63
Preparation of the electroless Ni–P and Ni–Cu–P coatings on engine cylinder and their tribological behaviors under bio-oil lubricated conditions
64
Preparation of the electrospun chitosan nanofibers and their applications to the adsorption of Cu(II) and Pb(II) ions from an aqueous solution
65
Preparation of the femoral bone cavity in cementless stems: broaching versus compaction
66
Preparation of the First Examples of Ansa-Spiro Substituted Fluorophosphazenes and Their Structural Studies: Analysis of C-H···F-P Weak Interactions in Substituted Fluorophosphazenes
67
Preparation of the first ortho-substituted pentafluorosulfanylbenzenes
68
Preparation of the future teacher for work with gifted children
69
Preparation of the highly loaded and well-dispersed NiO/SBA-15 for methanation of producer gas
70
Preparation of the hydrocarbon-soluble trifluoro complex LTiF3 with a β-diketiminato ligand
71
Preparation of the hydrophilic/hydrophobic silica particles
72
Preparation of the hypoxia imaging PET tracer [18F]FAZA: reaction parameters and automation
73
Preparation of the La0.8Sr0.2MnO3 films on STO and LAO substrates by excimer laser-assisted metal organic deposition using the KrF laser
74
Preparation of the liquid lithium divertor plates for NSTX
75
Preparation of the MacMillan imidazolidinones
76
Preparation of the major urinary metabolite of (−)-prostaglandin E2
77
Preparation of the manufacture of the ITER correction coils
78
Preparation of the metastable compound Au3Si by quenching liquid droplets of a Au–25 at.% Si allow into water
79
Preparation of the metastable compound Au3Si by quenching liquid droplets of a Au–25 at.% Si allow into water
80
Preparation of the methyl ester of hyaluronan and its enzymatic degradation Original Research Article
81
Preparation of the mixture of graphene nanosheets and carbon nanospheres with high adsorptivity by electrolyzing graphite rod and its application in hydroquinone detection
82
Preparation of the monomers of gingerols and 6-shogaol by flash high speed counter-current chromatography
83
Preparation of the multifunctional antireflective films from a templating composite silica sol with entwining structures
84
Preparation of the Neolignan Natural Product Grossamide by a Continuous-Flow Process
85
Preparation of the Ni-B amorphous alloys with variable boron content and its correlation to the hydrogenation activity Original Research Article
86
Preparation of the nickel foam/Ni–Ce–Co–O film electrode by thermal decomposition for oxygen evolution reaction
87
Preparation of the NiFe2O4 electrochemical film for the solid-state reference electrode based on EB-PVD
88
Preparation of the Ni–P composite coating co-deposited by nano TiC particles and evaluation of itʹs corrosion property
89
Preparation of the novel fluorine-18-labeled VIP analog for PET imaging studies using two different synthesis methods
90
Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption
91
Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption
92
Preparation of the novel XC(O)SeX species (X = Cl, Br) through matrix photochemical reactions of OCSe with Cl2 and Br2 at cryogenic temperatures
93
Preparation of the palladium(II) dimethylamide Pd(2,6-(Ph2PCH2)2C6H3)(NMe2) at low temperatures and its ligand exchange with the dicyclohexylamide
94
Preparation of the Pb(Mg1/3Nb2/3)O3 films by aqueous tape casting
95
Preparation of the pentasaccharide hapten of the GPL of Mycobacterium avium serovar 19 by achieving the glycosylation of a tertiary hydroxyl group Original Research Article
96
Preparation of the Persian Gulf Echinometra mathaei Organic Extracts and Investigation of Their Antibacterial Activity
97
Preparation of the Persian Gulf Echinometra mathaei Organic Extracts and Investigation of Their Antibacterial Activity
98
Preparation of the photosensitive copper complex and CuO film pattern
99
Preparation of the poly(vinyl alcohol)/layered double hydroxide nanocomposite
100
PREPARATION OF THE POPULATION AND HEALTHCARE SYSTEM FOR ACTION IN CASES OF RADIATION ACCIDENT AND NUCLEAR TERRORISM
101
Preparation of the Potential Ocular inser‎ts by Electrospinning Method to Achieve the Prolong Release Profile of Triamcinolone Acetonide
102
Preparation of the PVA/HAP composite polymer membrane for alkaline DMFC application Original Research Article
103
Preparation of the reticulated hydroxyapatite ceramics using carbon-coated polymeric sponge with elongated pores as a novel template
104
Preparation of the rod-like β-Si3N4 particles favoring the self-reinforcing Si3N4 ceramics
105
Preparation of the silicalite membranes using a seeding technique under various hydrothermal conditions Original Research Article
106
Preparation of the sodium salt of high acyl gellan and characterization of its structure, thermal and rheological behaviors
107
Preparation of the Speech-LanguagePathologist Specializing in Voice: An Educational Survey
108
Preparation of the squalene-based capsules by membrane emulsification method and polyelectrolyte multilayer adsorption
109
Preparation of the SrCe0.95Yb0.05O3−α proton conductor and study of the electrokinetics at the SrCe0.95Yb0.05O3−α/Pd interface
110
Preparation of the stimuli-responsive ZnS/PNIPAM hollow spheres
111
Preparation of the subnanometer thick epitaxial Al2O3(0001) layers on Fe(110) for magnetic tunnel junctions
112
Preparation of the substituted salicylato of titanocene derivatives by the liquid–liquid interfacial reaction
113
Preparation of the thermally stable conducting polymer PEDOT – Sulfonated poly(imide)
114
Preparation of the thicker americium targets by molecular plating
115
Preparation of the Three C1-C7, C8-C15, and C16-N22 Fragments of the Hsp90 Inhibitor Herbimycin A
116
Preparation of the ultrafine SrAl2O4:Eu,Dy needle-like phosphor and its optical properties
117
Preparation of the ZrTiAlV alloy with ultra-high strength and good ductility
118
Preparation of the β-cyclodextrin-vitamin C (β-CD-Vc) inclusion complex under high hydrostatic pressure (HHP)
119
Preparation of thermal stable porous polyimide membranes by phase inversion process for lithium-ion battery
120
Preparation of thermally curable conductive films PEDOT:P(SS-NMA) and their performances on weather stability and water resistance
121
Preparation of thermally stable polymer electrolytes from imidazolium-type ionic liquid derivatives
122
Preparation of thermoplastic elastomer from natural rubber grafted with polystyrene
123
Preparation of thermo-responsive acrylic hydrogels useful for the application in transdermal drug delivery systems
124
Preparation of thermoresponsive and pH-sensitivity polymer magnetic hydrogel nanospheres as anticancer drug carriers
125
Preparation of thermo-responsive core-shell microcapsules with a porous membrane and poly(N-isopropylacrylamide) gates
126
Preparation of thermo-responsive gating membranes with controllable response temperature
127
Preparation of thermoresponsive polymer brush surfaces and their interaction with cells
128
Preparation of thermo-responsive polymer brushes on hydrophilic polymeric beads by surface-initiated atom transfer radical polymerization for a highly resolutive separation of peptides
129
Preparation of thermo-responsive polypropylene membranes via surface entrapment of poly(N-isopropylacrylamide)-containing macromolecules
130
Preparation of thermo-responsive superhydrophobic TiO2/poly(N-isopropylacrylamide) microspheres
131
Preparation of thermosensitive chitosan with poly(N-isopropylacrylamide) side at hydroxyl group via O-maleoyl-N-phthaloyl-chitosan (MPCS)
132
Preparation of thermosensitive polymeric organogels and their drug release behaviors
133
Preparation of thermostable electroconductive composite plates from expanded graphite and polyimide
134
Preparation of thermostable trypsin–polysaccharide neoglycoenzymes through Ugi multicomponent reaction
135
Preparation of thick enriched isotopic Si targets by the HIVIPP method
136
Preparation of thick enriched isotopic Si targets by the HIVIPP method
137
Preparation of thick GeO2 glass film with high UV photosensitivity
138
Preparation of thick, crack-free germanosilicate glass films by polyvinylpyrrolidone and study of the UV-bleachable absorption band
139
Preparation of thieno[2,3-b]pyrroles starting from ketene-N,S-acetals
140
Preparation of thin and highly stable Pd/Ag composite membranes and simulative analysis of transfer resistance for hydrogen separation
141
Preparation of thin carbon fibers from phenol–formaldehyde polymer micro-beads dispersed in polyethylene matrix Original Research Article
142
Preparation of thin carbon fibers from waste wood-derived phenolic resin
143
Preparation of thin ceramic monofilaments for characterization by TEM
144
Preparation of thin ceramic monofilaments for characterization by TEM
145
Preparation of thin ceramic monofilaments for characterization by TEM
146
Preparation of thin ceramic monofilaments for TEM observation with novel embedding processes
147
Preparation of thin ceramic monofilaments for TEM observation with novel embedding processes
148
Preparation of thin film composite membranes with polyamide film on hydrophilic supports
149
Preparation of thin film of CaZrO3 by pulsed laser deposition
150
Preparation of thin film polycrystalline silicon on glass by photo-thermal annealing
151
Preparation of thin film SOFCs working at reduced temperature
152
Preparation of thin films and nanostructured coatings for clean tech applications: A primer
153
Preparation of thin films by sulfurizing sol–gel deposited precursors
154
Preparation of thin films of carbon-based compounds
155
Preparation of thin films of graphite-like B/C/N materials on Ni(1 1 1) and HOPG substrates
156
Preparation of thin films of YBa2Cu3Ox with a smooth surface by atomic layer MOCVD
157
Preparation of thin films of YBa2Cu3Ox with a smooth surface by atomic layer MOCVD
158
Preparation of thin Ga-doped ZnO layers for core–shell GaP/ZnO nanowires
159
Preparation of thin iron films by electrodeposition and characterization of their local magnetic properties
160
Preparation of thin layer materials with macroporous microstructure for SOFC applications
161
Preparation of thin metallic titanium foils as hydrogen targets
162
Preparation of thin metallic titanium foils as hydrogen targets
163
Preparation of thin Nd-doped YVO4 single crystal rods by the floating zone method
164
Preparation of thin palladium composite membrane tube by a CVD technique and its hydrogen permselectivity
165
Preparation of thin palladium membranes on a porous support with rough surface
166
Preparation of thin Pd membrane on CeO2-modified porous metal by a combined method of electroless plating and chemical vapor deposition
167
Preparation of thin Pd membrane on porous stainless steel tubes modified by a two-step method
168
Preparation of thin Pd-based composite membrane on planar metallic substrate: Part I: Pre-treatment of porous stainless steel substrate
169
Preparation of thin Pd-based composite membrane on planar metallic substrate: Part II. Preparation of membranes by electroless plating and characterization
170
Preparation of thin plastic conductive foils for use in a position-sensitive micro-channel plate detector system
171
Preparation of thin plastic conductive foils for use in a position-sensitive micro-channel plate detector system
172
Preparation of thin polymer films with controlled drug release
173
Preparation of thin polymer films with drug release and protein adsorption resistance
174
Preparation of thin ribbon and bulk glassy alloys in CoFeBSiNb(Ga) using planar flow casting and suction casting methods
175
Preparation of thin Si:H films in an inductively coupled plasma reactor and analysis of their surface roughness
176
Preparation of thin silver films on mica studied by XRD and AFM
177
Preparation of thin, homogeneous zinc targets by vacuum evaporation
178
Preparation of thin, homogeneous zinc targets by vacuum evaporation
179
Preparation of thin-film-composite polyamide membranes for desalination using novel hydrophilic surface modifying macromolecules
180
Preparation of thioesters for the ligation of peptides with non-native substrates
181
Preparation of thiophene-fused TTFs and their charge-transfer complexes
182
Preparation of ThO2 as a structural analogue for nuclear fuel via surfactanttemplated solgel route
183
Preparation of three dimensionally ordered macroporous Li0.35La0.55TiO3 by colloidal crystal templating process
184
Preparation of three new 4′-phenyl-terpyridine–copper(II) complexes containing nicotinate or iso-nicotinate ligands
185
Preparation of three-dimensional braided carbon fiber-reinforced PEEK composites for potential load-bearing bone fixations. Part I. Mechanical properties and cytocompatibility
186
Preparation of three-dimensional chromium oxide porous single crystals templated by SBA-15
187
Preparation of three-dimensional composite of poly(N-acetylaniline) nanorods/platinum nanoclusters and electrocatalytic oxidation of methanol
188
Preparation of three-dimensional shaped aluminum alloy foam by two-step foaming
189
Preparation of three-dimensionally ordered macroporous perovskite-type lanthanum–iron-oxide LaFeO3 with tunable pore diameters: High porosity and photonic property
190
Preparation of thymolphthalein stearate and appraisement of its efficacy as an antioxidant for polypropylene
191
Preparation of Ti incorporated Y zeolites by a post-synthesis method under acidic conditions and their catalytic properties Original Research Article
192
Preparation of Ti(IV), Zr(IV) and Sn(IV) metal alkyls containing the (PriO)3SiCH2 fragment
193
Preparation of Ti/PbO2–Sn anodes for electrochemical degradation of phenol
194
Preparation of Ti/SiO2 catalysts by chemical vapor deposition method for olefin epoxidation with cumene hydroperoxide Original Research Article
195
Preparation of Ti/SnO2–Sb2O4 photoanode by electrodeposition and dip coating for PEC oxidations Original Research Article
196
Preparation of Ti+Ti6Si2B powders by high-energy ball milling and subsequent heat treatment
197
Preparation of TiC ceramics through aqueous tape casting
198
Preparation of TiC/Ni3Al Composites by Upward Melt Infiltration
199
Preparation of Ti–Cr and Ti–Cu flame-retardant coatings on Ti–6Al–4V using a high-energy mechanical alloying method: A preliminary research
200
Preparation of TiC-TiB2-SiC Ternary Eutectic Composites by Arc-Melting and Their Characterizations
201
Preparation of Ti–Fe based hydrogen storage alloy by SOM method
202
Preparation of TiFe thin films by intense pulsed ion-beam evaporation
203
Preparation of TiN film on the inner surface of a pipe by plasma-based ion implantation and deposition
204
Preparation of TiN films at room temperature by inductively coupled plasma assisted chemical vapor deposition
205
Preparation of TiN films by plasma assisted atomic layer deposition for copper metallization
206
Preparation of tin nanoparticles by solution dispersion
207
Preparation of tin nanoparticles by solution dispersion
208
Preparation of tin oxide films on various substrates by excimer laser metal organic deposition
209
Preparation of tin sulfide–graphene composites with enhanced lithium storage
210
Preparation of Tin Using Wet Method
211
Preparation of tin-filled carbon nanotubes and nanoparticles by molten salt electrolysis
212
Preparation of TiNi ferroelastic–ferroelectric thin film heterostructures
213
Preparation of TiO2 composite microfiltration membranes by the wet powder spraying method
214
Preparation of TiO2 fibers by two-step synthesis method and their photocatalytic activity
215
Preparation of TiO2 from ilmenite using sulfuric acid decomposition of the titania residue combined with separation of Fe3+ with EDTA during hydrolysis
216
Preparation of TiO2 hollow fibers using poly(vinylidene fluoride) hollow fiber microfiltration membrane as a template
217
Preparation of TiO2 hollow microspheres by a novel vesicle template method and their enhanced photocatalytic properties
218
Preparation of TiO2 hollow spheres for DSSC photoanodes Original Research Article
219
Preparation of TiO2 microcoils from carbon microcoil templates using a sol–gel process
220
Preparation of TiO2 nanocrystalline electrode for dye-sensitized solar cells by 28 GHz microwave irradiation
221
Preparation of TiO2 nanocrystalline with 3–5 nm and application for dye-sensitized solar cell
222
Preparation of TiO2 nanocrystallites by hydrolyzing with gaseous water and their photocatalytic activity
223
Preparation of TiO2 nanofilm via sol–gel process and its photocatalytic activity for degradation of methyl orange
224
Preparation of TiO2 nanoparticles by using tripodal tetraamine ligands as complexing agent via two-step sol–gel method and their application in dye-sensitized solar cells
225
Preparation of TiO2 nanoparticles on the surface of SiO2 in binary liquids
226
Preparation of TiO2 nanoparticles surface-modified by both carboxylic acid and amine: Dispersibility and stabilization in organic solvents
227
Preparation of TiO2 nanosheets and Li4Ti5O12 anode material from natural ilmenite
228
Preparation of TiO2 nanotubes coated on polyurethane and study of their photocatalytic activity
229
Preparation of TiO2 nanowire gas nanosensor by AFM anode oxidation
230
Preparation of TiO2 nanowire gas nanosensor by AFM anode oxidation
231
Preparation of TiO2 particles and their applications in the light scattering layer of a dye-sensitized solar cell
232
Preparation of TiO2 photocatalyst film and its catalytic performance for 1,1′-dimethyl-4,4′-bipyidium dichloride decomposition
233
Preparation of TiO2 Photocatalysts by Multi-gelation and Their Photocatalytic Reactivity for the Degradation of 2-Propanol
234
Preparation of TiO2 self-assembled polymeric nanocomposite membranes and examination of their fouling mitigation effects in a membrane bioreactor system
235
Preparation of TiO2 thin film by liquid sprayed mist CVD method
236
Preparation of TiO2 thin film on SiO2 glass by a spin coating–pyrolysis process
237
Preparation of TiO2 thin films by pulsed laser deposition for waveguiding applications
238
Preparation of TiO2 thin films by spray pyrolysis to be used as a photocatalyst
239
Preparation of TiO2 thin films from autoclaved sol containing needle-like anatase crystals
240
Preparation of TiO2 thin films on glass beads by a rotating plasma reactor
241
Preparation of TiO2 thin films on glass surfaces with self-cleaning characteristics for solar concentrators
242
Preparation of TiO2 ultrafine nanopowder with large surface area and its photocatalytic activity for gaseous nitrogen oxides
243
Preparation of TiO2/carbon nanotubes photocatalysts: The influence of the method of oxidation of the carbon nanotubes on the photocatalytic activity of the nanocomposites
244
Preparation of TiO2/dye composite particles and their applications in dye-sensitized solar cell
245
Preparation of TiO2/epoxy nanocomposites by ultrasonic dispersion and their structure property relationship
246
Preparation of TiO2/epoxy nanocomposites by ultrasonic dispersion and their structure property relationship
247
Preparation of TiO2/ITO and TiO2/Ti photoelectrodes by magnetron sputtering for photocatalytic application Original Research Article
248
Preparation of TiO2/mesoporous carbon composites and their photocatalytic performance for methyl orange degradation
249
Preparation of TiO2/mesoporous carbon composites and their photocatalytic performance for methyl orange degradation
250
Preparation of TiO2/Nano-metal composite particles and their applications in dye-sensitized solar cells
251
Preparation of TiO2/NiO composite particles and their applications in dye-sensitized solar cells
252
Preparation of TiO2/PANI composites in the presence of surfactants and investigation of electrical properties
253
Preparation of TiO2/polyaniline nanocomposite from a lyotropic liquid crystalline solution
254
Preparation of TiO2/PS complex nanoparticles
255
Preparation of TiO2–carbon surface composites with high photoactivity by supercritical pretreatment and sol–gel processing
256
Preparation of TiO2-doped ZnO films by radio frequency magnetron sputtering in ambient hydrogen–argon gas
257
Preparation of TiO2-enriched CaCu3Mn0.1Ti3.9O12 ceramics and their dielectric properties
258
Preparation of TiO2-loaded nanocapsules and their sun protection behaviors
259
Preparation of TiO2–Na2O glass by sol–gel method and structural characterization
260
Preparation of TiO2-pillared montmorillonite as photocatalyst Part I. Microwave calcination, characterisation, and adsorption of a textile azo dye
261
Preparation of TiO2-pillared montmorillonite as photocatalyst Part II: Photocatalytic degradation of a textile azo dye
262
Preparation of TiO2–SiO2 aperiodic mesoporous materials with controllable formation of tetrahedrally coordinated Ti4+ ions and their performance for photocatalytic hydrogen production
263
Preparation of TiO2-supported Au nanoparticle catalysts from a Au13 cluster precursor: Ligand removal using ozone exposure versus a rapid thermal treatment
264
Preparation of titania foams having an open cellular structure and their application to photocatalysis
265
Preparation of titania hollow spheres by catalyst-free hydrothermal method and their high thermal stabilities
266
Preparation of titania microballoons by sol–gel process in reverse dispersion
267
Preparation of titania microfiltration membranes supported on porous Ti–Al alloys
268
Preparation of titania nanotape array and its photocatalytic property Original Research Article
269
Preparation of titania particles by thermal hydrolysis of TiCl4 in n-propanol solution
270
Preparation of titania sol–gel matrix for the immunoassay by SPR biosensor with magnetic beads
271
Preparation of titania/carbon nanotube composites using supercritical ethanol and their photocatalytic activity for phenol degradation under visible light irradiation Original Research Article
272
Preparation of titania/silica composite microspheres by sol–gel process in reverse suspension
273
Preparation of titania/silica mesoporous composites with activated carbon template in supercritical carbon dioxide
274
Preparation of titania-coated alumina film by electrolysis of TiCl4-containing solution
275
Preparation of titania-containing photocatalysts from metallurgical slag waste and photodegradation of 2,4-dichlorophenol
276
Preparation of titania-hydroxyapatite composite nanoparticles as a potential drug carrier for ibuprofen
277
Preparation of titania–zirconia composite aerogel material by sol–gel combined with supercritical fluid drying Original Research Article
278
Preparation of Titanium Dioxide Hollow Fiber Membrane Using Phase Inversion and Sintering Technique for Gas Separation and Water Purification
279
Preparation of titanium dioxide nano particle modified photocatalytic self-cleaning concrete
280
Preparation of titanium dioxide porous thin films via photopolymerization of the colloidal TiO2 dispersion
281
Preparation of titanium dioxide thin films by means of a hot wall technique
282
Preparation of titanium dioxide/activated carbon composites using supercritical carbon dioxide Original Research Article
283
Preparation of titanium dioxides in the W/C microemulsions and their photocatalytic activity
284
Preparation of titanium nitride ultrafine powders by sol–gel and microwave carbothermal reduction nitridation methods
285
Preparation of titanium oxide, iron oxide, and aluminium oxide from sludge generated from Ti-salt, Fe-salt and Al-salt flocculation of wastewater
286
Preparation of Titanium Oxide-containing Organic Film by Dipping Ti(OR)4 and Cold Plasma oxidizing on PET
287
Preparation of titanium oxynitride thin films by reactive sputtering using air/Ar mixtures
288
Preparation of titanium(IV) oxide thin film photocatalyst by sol–gel dip coating
289
Preparation of titanium-containing zeolites with MEL structure from B-ZSM-11 and their characterization Original Research Article
290
Preparation of titanium-grafted magnetic mesoporous silica for the enrichment of endogenous serum phosphopeptides
291
Preparation of titanocene and zirconocene dichlorides bearing bulky 1,4-dimethyl-2,3-diphenylcyclopentadienyl ligand and their behavior in polymerization of ethylene
292
Preparation of Ti-TiB-TiC & Ti-TiB composites by in-situ reaction hot pressing
293
Preparation of Ti-TiB-TiC & Ti-TiB composites by in-situ reaction hot pressing
294
Preparation of TiSi mixed oxides by sol–gel one step hydrolysis
295
Preparation of Tl-2212 and Tl-1223 superconductor thin films and their microwave surface resistance
296
Preparation of TMS protected trifluoromethylated alcohols using trimethylamine N-oxide and trifluoromethyltrimethylsilane (TMSCF3)
297
Preparation of todorokite-type manganese-based oxide and its application as lithium and magnesium rechargeable battery cathode
298
Preparation of tofu using chitosan as a coagulant for improved shelf -life
299
Preparation of transgenic Iranian lizard Leishmania coding HIL-12
300
Preparation of Transition Metal Sulfide Nanoparticles via Hydrothermal Route
301
Preparation of transition-state analogues of sterol 24-methyl transferase as potential anti-parasitics Original Research Article
302
Preparation of transmission electron microscope specimens from FeAl and WC powders using focused-ion beam milling
303
Preparation of transparent and conducting boron-doped ZnO electrode for its application in dye-sensitized solar cells
304
Preparation of transparent and conducting carbon nanotube/N-hydroxymethyl acrylamide composite thin films by in situ polymerization Original Research Article
305
Preparation of transparent and conductive Al-doped ZnO thin films by ECR plasma enhanced CVD
306
Preparation of transparent and conductive thin films of carbon nanotubes using a spreading/coating technique Original Research Article
307
Preparation of transparent anodic alumina with ordered nanochannels by through-thickness anodic oxidation of aluminum sheet
308
Preparation of transparent BN films with superhydrophobic surface
309
Preparation of transparent Ce:YSAG ceramic and its optical properties
310
Preparation of transparent cobalt doped glass ceramic and application as saturable absorber Q switch for 1.54 μm Er-glass laser
311
Preparation of transparent conducting films with improved haze characteristics using single-wall carbon nanotube-silver nanowire hybrid material
312
Preparation of transparent conducting films with improved haze characteristics using single-wall carbon nanotube-silver nanowire hybrid material
313
Preparation of transparent conducting ZnO:Al films on polymer substrates by r. f. magnetron sputtering
314
Preparation of transparent conductive thin films by facing targets sputtering system
315
Preparation of transparent conductive TiO2:Nb thin films by pulsed laser deposition
316
Preparation of transparent lithium-mica glass-ceramics
317
Preparation of transparent polystyrene nano-latexes by an UV-induced routine emulsion polymerization
318
Preparation of transparent Y2O3 ceramic by slip casting and vacuum sintering
319
Preparation of transparent zein films for cell culture applications
320
Preparation of transparent, conductive ZnO:Co and ZnO:In thin films by ultrasonic spray method
321
Preparation of trialkyl-substituted olefins by ruthenium catalyzed cross-metathesis
322
Preparation of triarylantimony(V) diacetates and palladium-catalyzed cross-coupling and carbonylative cross-coupling of triarylantimony(V) diacetates and dichlorides with organostannanes
323
Preparation of triazine derivatives and evaluation of their tribological properties as lubricant additives in poly-alpha olefin
324
Preparation of triazole-linked glycosylated α-ketocarboxylic acid derivatives as new PTP1B inhibitors
325
Preparation of triazolobenzodiazepine derivatives as Vasopressin V1a antagonists
326
Preparation of trichloro- and tribromocyclopentadienyltungsten(IV)
327
Preparation of trifluoroethyl- and phenyl-protected sulfates using sulfuryl imidazolium salts
328
Preparation of trifluoroiodomethane via vapor-phase catalytic reaction between hexafluoropropylene oxide and iodine
329
Preparation of trihydridostannyl complexes of rhenium stabilised by isocyanide ligands
330
Preparation of trimetallic Pt–Re–Ge/Al2O3 and Pt–Ir–Ge/Al2O3 naphtha reforming catalysts by surface redox reaction Original Research Article
331
Preparation of trimethylsilyl group containing copolymer for negative-type photoresists that enable stripped by an alkaline solution
332
Preparation of tris-based dendrimer-grafted core-shell type resin for solid-phase peptide synthesis
333
PREPARATION OF TRISUBSTITUTEDPYRIMIDINES USING FERRIC PHOSPHATE
334
Preparation of TS-1 by wetness impregnation of amorphous SiO2—TiO2 solids: influence of the synthesis variables Original Research Article
335
Preparation of tubular mixed conducting oxide membrane by electrophoretic deposition technique Original Research Article
336
Preparation of tubular TiO2/Al2O3 composite membranes and their performance in electrofiltration of oxide-CMP wastewater Original Research Article
337
Preparation of tunable silicon q-dots through ultrasound
338
Preparation of tunable silicon q-dots through ultrasound
339
Preparation of tungsten borides by combustion synthesis involving borothermic reduction of WO3
340
Preparation of tungsten carbide-supported nano Platinum catalyst and its electrocatalytic activity for hydrogen evolution
341
Preparation of tungsten coatings on graphite by electro-deposition via Na2WO4–WO3 molten salt system
342
Preparation of tungsten oxide nanowires and their application to NO2 sensing
343
Preparation of tungsten oxide promoted zirconia by different methods
344
Preparation of turmeric oil-loaded chitosan-alginate biopolymeric nanocapsules
345
Preparation of two glycoside hydrolases for use in micro-aqueous media
346
Preparation of two new [2]rotaxanes based on the pillar[5]arene/alkane recognition motif
347
Preparation of Two New GSJ Geochemical Reference Materials: Basalt JB-1b and Coal Fly Ash JCFA-1
348
Preparation of two new liquid chromatographic chiral stationary phases based on diastereomeric chiral crown ethers incorporating two different chiral units and their applications
349
Preparation of two novel monobrominated 2-(2′,4′-dihydroxybenzoyl)-3,4,5,6-tetrachlorobenzoic acids and their separation from crude synthetic mixtures using vortex counter-current chromatography
350
Preparation of type-II MoS2 film by chemical bath deposition onto Si coated with electrolessly Ni
351
Preparation of U3O8 by Calcination from Ammonium Uranyl Carbonate Using Response Surface Methodology: Process Ptimization
352
Preparation of Ultra Dispersive Glasses for Designing Novel Coatings
353
Preparation of ultra fine copper–nickel bimetallic powders for conductive thick film
354
Preparation of Ultra High Molecular Weight Polyethylene Using Ziegler-Natta Catalyst System: Optimization of Parameters by Response Surface Methodology
355
Preparation of ultra-active alumina of designed porous structure by successive hydrothermal and thermal treatments of porous anodic Al2O3 films Original Research Article
356
Preparation of ultrafine and nanocrystalline FeAl powders
357
Preparation of ultrafine and nanocrystalline FeAl powders
358
Preparation of ultrafine calcium carbonate particles with micropore dispersion method
359
Preparation of ultrafine Ce-based oxide nanoparticles and their catalytic performances for diesel soot combustion
360
Preparation of ultra-fine cobalt–nickel manganite powders and ceramics derived from mixed oxalate
361
Preparation of Ultrafine Colloidal Gold Particles using a Bioactive Molecule
362
Preparation of ultrafine composite particles of Ag+AlN/Al by nitrogen plasma metal reaction
363
Preparation of ultrafine composite particles of Ag+AlN/Al by nitrogen plasma metal reaction
364
Preparation of ultra-fine copper–nickel bimetallic powders with hydrothermal–reduction method
365
Preparation of ultrafine CsCl crystallites by combined cryogenic and room temperature ball milling
366
Preparation of ultrafine cubic Sb2O3 crystals under ultrasonic
367
Preparation of ultrafine cubic Sb2O3 crystals under ultrasonic
368
Preparation of ultrafine fast-dissolving feruloyl-oleyl-glycerol-loaded polyvinylpyrrolidone fiber mats via electrospinning
369
Preparation of ultrafine FePt nanoparticles by chemical reduction in PAMAM-OH template
370
Preparation of ultra-fine fiber mats contained H4SiW12O40
371
Preparation of ultrafine layered tetratitanate powders using nanoscale TiO2 as reactant and their intercalation property
372
Preparation of ultrafine magnetite and its oxygen adsorption
373
Preparation of ultrafine MnO2 powders by the solid state method reaction of KMnO4 with Mn(II) salts at room temperature
374
Preparation of Ultrafine Nickel Ferrite Powders Using Mixed Ni and Fe Tartrates
375
Preparation of ultrafine nickel powder and its catalytic dehydrogenation activity
376
Preparation of ultrafine nickel powder by polyol method and its oxidation product
377
Preparation of ultrafine platinum dispersed carbon having high specific surface area using potassium hydroxide
378
Preparation of ultrafine polypropylene/iron composite powders through pan-milling
379
Preparation of ultrafine powders of Nb2O3 by hydrothermal H2O2 oxidation starting from metallic Nb
380
Preparation of ultrafine PZT powders by ultrasonic spray combustion synthesis (USCS)
381
Preparation of ultrafine silica- and PEG-coated magnetite particles
382
Preparation of ultrafine silver powder using ascorbic acid as reducing agent and its application in MLCI
383
Preparation of ultrafine SiO2 with high surface area by the chemical precipitation method
384
Preparation of ultrafine SiO2 with high surface area by the chemical precipitation method
385
Preparation of ultrafine spherical AlOOH and Al2O3 powders by aqueous precipitation method with mixed surfactants
386
Preparation of ultrafine TiC–Ni cermet powders by mechanical alloying
387
Preparation of ultrafine tungsten wire via electrochemical method in an ionic liquid
388
Preparation of ultra-flat YBCO thin films by MOCVD layer-by-layer deposition
389
Preparation of ultra-high modulus materials from metallocene based linear polyethylenes
390
Preparation of Ultra-High Performance Concrete with common technology and materials
391
Preparation of ultra-high purity CdTe single crystals
392
Preparation of ultra-light magnetic nanocomposites using highly concentrated emulsions
393
Preparation of ultra-lightweight sludge ceramics (ULSC) and application for pharmaceutical advanced wastewater treatment in a biological aerobic filter (BAF)
394
Preparation of ultramicroporous carbon fiber of high adsorption capacity
395
Preparation of ultrapure bovine and human hemoglobin by anion exchange chromatography
396
Preparation of ultra-pure water and acids and investigation of background of an ICP-MS laboratory
397
Preparation of ultrastrength nanopapers using cellulose nanofibrils
398
Preparation of ultrathin coating layers using surface modified silica nanoparticles
399
Preparation of ultrathin films of polyaniline and its derivatives by electrochemical deposition on thiol modified gold
400
Preparation of ultrathin polydimethylsiloxane-coating on Cu as oxidation-protection layer
401
Preparation of ultrathin PZT films by a chemical solution deposition method from a polymeric citrate precursor
402
Preparation of undegraded native molecular fibroin solution from silkworm cocoons
403
Preparation of uniaxial multichannel silk fibroin scaffolds for guiding primary neurons
404
Preparation of uniaxially aligned mullite ceramic fibers by electrospinning
405
Preparation of uniform 2D ZnO nanostructures by the ionic liquid-assisted sonochemical method and their optical properties
406
Preparation of uniform and large sized agarose microspheres by an improved membrane emulsification technique
407
Preparation of uniform Au@SiO2 particles by direct silica coating on citrate-capped Au nanoparticles
408
Preparation of Uniform Colloidal Dispersions by Chemical Reactions in Aerosols. VI. Silica/Titania Composite Particles
409
Preparation of uniform micrometer-sized polymer particles with closed-cell porous architecture made by limited coalescence of a double emulsion
410
Preparation of uniform poly-caprolactone Microparticles by membrane emulsification/solvent diffusion process
411
Preparation of uniform porous hydroxyapatite biomaterials by a new method
412
Preparation of uniform rhodamine B-doped SiO2/TiO2 composite microspheres
413
Preparation of uniform TiO2 nanostructure film on 316L stainless steel by sol–gel dip coating
414
Preparation of uniform α-Fe2O3 particles by microwave-induced hydrolysis of ferric salts
415
Preparation of uniform β-FeO(OH) colloidal particles by hydrolysis of ferric salts under microwave irradiation
416
Preparation of uniformly dispersed YAG ultrafine powders by co-precipitation method with SDS treatment
417
Preparation of uniformly sized alginate microspheres using the novel combined methods of microchannel emulsification and external gelation
418
Preparation of uniform-sized exenatide-loaded PLGA microspheres as long-effective release system with high encapsulation efficiency and bio-stability
419
Preparation of uniform-sized pH-sensitive quaternized chitosan microsphere by combining membrane emulsification technique and thermal-gelation method
420
Preparation of unsaturated polyesters using boric acid as mild catalyst and their sulfonated derivatives as new family of degradable polymer surfactants
421
Preparation of unsupported Ni–Mo–S catalysts for hydrodesulfurization of dibenzothiophene by thermal decomposition of tetramethylammonium thiomolybdates
422
Preparation of unsymmetrical biaryls via palladium-catalyzed coupling reaction of aryl halides
423
Preparation of unsymmetrical dialkyl acetylenedicarboxylates and related esters by enzymatic transesterification
424
Preparation of unsymmetrical terphenyls via the nickel-catalyzed cross-coupling of alkyl biphenylsulfonates with aryl Grignard reagents
425
Preparation of UO2/TiO2 composite ceramic fuel by sol gel-press forming method
426
Preparation of uranium by electrolysis in chloride melt
427
Preparation of uranium fuel kernels with silicon carbide nanoparticles using the internal gelation process
428
Preparation of uranium targets by electroplating
429
Preparation of urchinlike NiO nanostructures and their electrochemical capacitive behaviors
430
Preparation of urease-immobilized polymeric membranes and their function
431
Preparation of Ureido-palygorskite and its effect on the properties of urea-formaldehyde resin
432
Preparation of UV curing crosslinked polyviologen film and its photochromic and electrochromic performances
433
Preparation of UV-curable intercalated/exfoliated epoxide/acrylateclays nanocomposite resins
434
Preparation of UV-curable long chain dibasic acid modified epoxydiacrylates and their coating properties
435
Preparation of UV-cured pigment/latex dispersion for textile inkjet printing
436
Preparation of UV-dye TMQ-Doped Silica Film and Xerogel by Sol-gel Method
437
Preparation of V2O3 nanopowders by supercritical fluid reduction
438
Preparation of vacuum-deposited poly(p-phenylene) films with high optical anisotropy
439
Preparation of vanadium oxide thin films with high temperature coefficient of resistance by facing targets d.c. reactive sputtering and annealing process
440
Preparation of vanadium pentoxide powders by microwave plasma-torch at atmospheric pressure
441
Preparation of vanadium phosphate catalyst precursors for the selective oxidation of butane using α,ω-alkanediols
442
Preparation of vanadium phosphate catalyst precursors using a high pressure method
443
Preparation of vanadium phosphate catalysts using water as solvent
444
Preparation of vancomycin (5 mg/ml, 3 ml) line lock in Pharmacy Aseptic Services for the treatment of catheter-related sepsis in home parenteral nutrition patients
445
Preparation of vapor grown carbon fibers by microwave pyrolysis chemical vapor deposition Original Research Article
446
Preparation of vapor-grown carbon fibers from deoiled asphalt Original Research Article
447
Preparation of various C-2 branched carbohydrates using intramolecular radical reactions Original Research Article
448
Preparation of various calcium-phosphate powders by ultrasonic spray freeze-drying technique
449
Preparation of various color ultramarine from zeolite A under environment-friendly conditions
450
Preparation of various silica-based columns for capillary electrochromatography by in-column derivatization
451
Preparation of vertically aligned carbon nanotube arrays grown onto carbon fiber fabric and evaluating its wettability on effect of composite
452
Preparation of vertically aligned carbon nanotubes and their electrochemical performance in supercapacitors
453
Preparation of vertically aligned carbon nanotubes and their electrochemical performance in supercapacitors
454
Preparation of vesicle drug carrier from palm oil- and palm kernel oil-based glycosides
455
Preparation of vinyl polymer stabilized silver nanospheres for electro-analytical determination of H2O2
456
Preparation of Vinyl Silicone Grafted with Nano-SiO2 ERF and Its Modification Study with Rare Earth
457
Preparation of vinylglycines by thermolysis of homocysteine sulfoxides
458
Preparation of vinylphenols from 2- and 4-hydroxybenzaldehydes
459
Preparation of visible light responsive N doped TiO2 via a reduction–nitridation procedure by nonthermal plasma treatment
460
Preparation of visible light sensitive nano-sized N-TiO2 photocatalysts and their photocatalytic activity under visible light
461
Preparation of visible light-responsive AgBiO3 bactericide and its control effect on the Microcystis aeruginosa
462
Preparation of visible-light responsive N–F-codoped TiO2 photocatalyst by a sol–gel-solvothermal method
463
Preparation of visible-light responsive Psingle bondF-codoped TiO2 nanotubes
464
Preparation of visible-light-excited europium biolabels for time-resolved luminescence cell imaging application
465
Preparation of Visible-Light-Responsive Titanium Oxide Photocatalysts by Plasma Treatment
466
Preparation of vitamin K-dependent proteins, such as clotting factors II, VII, IX and X and clotting inhibitor Protein C
467
Preparation of VO2 nanowires and their electric characterization
468
Preparation of void-free casts from vinyl polysiloxane impressions
469
Preparation of volume table of SAL (Shorea robusta) - an approach using satellite data
470
Preparation of W/O emulsions by membrane emulsification with a mullite ceramic membrane Original Research Article
471
Preparation of W/O/W microcapsule containing enzyme without alcohol
472
Preparation of water dispersible, fluorescent Ag–PAA–PVP hybrid nanogels and their optical properties
473
Preparation of water management layer and effects of its composition on performance of PEMFCs
474
Preparation of water powders by the adsorption of hydrophobic nanoparticles at the surface of hydrated starch particulates
475
Preparation of water soluble chitosan by hydrolysis with commercial α-amylase containing chitosanase activity
476
Preparation of water soluble drugs-loaded microparticles using modified solution enhanced dispersion by supercritical CO2
477
Preparation of water soluble graphene using polyethylene glycol: Comparison of covalent approach and noncovalent approach
478
Preparation of water soluble l-arginine capped CdSe/ZnS QDs and their interaction with synthetic DNA: Picosecond-resolved FRET study
479
Preparation of Water-Based Alkyd/Acrylic Hybrid Resins
480
Preparation of water-borne dispersions of polyolefins: new systems for the study of homogeneous nucleation of polymers
481
Preparation of waterborne epoxy acrylate/silica sol hybrid materials and study of their UV curing behavior
482
Preparation of waterborne polyurethane nanocomposites: Polymerization from functionalized hydroxyapatite
483
Preparation of Water-Dispersible and Biocompatible Iron Oxide Nanoparticles for MRI Agent
484
Preparation of water-durable humidity sensor by attachment of polyelectrolyte membrane to electrode substrate by photochemical crosslinking reaction
485
Preparation of water-in-oil and ethanol-in-oil emulsions by membrane emulsification
486
Preparation of water-in-oil emulsions using microporous polypropylene hollow fibers: influence of some operating parameters on droplet size distribution
487
Preparation of water-in-oil-in-water (W1/O/W2) double emulsions containing trans-resveratrol
488
Preparation of water-repellent cellulose fibers using a polycarboxylic acid/hydrophobic silica nanocomposite coating
489
Preparation of water-repellent cotton fabrics from fluorinated diblock copolymers and evaluation of their durability
490
Preparation of water-repellent thin film by RF pulse-modulated plasma CVD using C2H2F2 gas
491
Preparation of water-soluble and water-swellable starch acetates using microwave heating
492
Preparation of water-soluble antimicrobial zein nanoparticles by a modified antisolvent approach and their characterization Original Research Article
493
Preparation of water-soluble CdTe/CdS core/shell quantum dots with enhanced photostability
494
Preparation of water-soluble chitosan/heparin complex and its application as wound healing accelerator
495
Preparation of water-soluble conjugated polyelectrolyte and its response characteristics
496
Preparation of water-soluble hyperbranched poly(sulfone-amine)s by polyaddition of N-ethylethylenediamine to divinyl sulfone
497
Preparation of water-soluble palladium nanocrystals by reverse micelle method: Digestive ripening behavior of mercaptocarboxylic acids as stabilizing agent
498
Preparation of Water-soluble PEGylated Semiconductor Nanocrystals
499
Preparation of water-soluble/insoluble derivatives of hyaluronic acid by cross-linking with epichlorohydrin in aqueous NaOH/NH4OH solution
500
Preparation of water-stable submicron fibers from aqueous latex dispersion of water-insoluble polymers by electrospinning
501
Preparation of WC–W2C composites by arc plasma melting and their characterisations
502
Preparation of well-adhered g-Al2O3 washcoat on metallic wire mesh monoliths by electrophoretic deposition
503
Preparation of well-aligned carbon nanotubes by pyrolysis of phenolic resin in anodic alumina pores
504
Preparation of well-crystallized Pd20Te7 alloy nanoparticulate catalysts with uniform structure and composition in liquid-phase Original Research Article
505
Preparation of well-defined blackberry-like polypyrrole/fly ash composite microspheres and their electrical conductivity and magnetic properties
506
Preparation of well-defined environmentally responsive polymer brushes on monolithic surface by two-step atom transfer radical polymerization method for HPLC
507
Preparation of well-defined poly(ether–ester) macromers: Photogelation and biodegradability
508
Preparation of well-defined polymer-silicon wafer hybrids via surface-initiated RAFT-mediated process
509
Preparation of well-defined samples of AlPdMn quasicrystals for surface studies
510
Preparation of well-dispersed Pt nanoparticles on solvothermal graphene and their enhanced electrochemical properties
511
Preparation of well-dispersed Pt/SiO2 catalysts using low-temperature treatments Original Research Article
512
Preparation of well-dispersed spherical nickel powders with uniform size via mild solvothermal route
513
Preparation of well-ordered hexagonal particles of synthetic cobalt smectites containing electrochemically active cobalt(II) sites
514
Preparation of wheat straw based superabsorbent resins and their applications as adsorbents for ammonium and phosphate removal
515
Preparation of whisker-shaped hydroxyapatite/β-tricalcium phosphate composite
516
Preparation of White Heart Malleable Cast Iron in Na2O-SiO2 Oxide Molten Salt
517
Preparation of wide gap and low resistive hetero-structured SiCX films as wide gap window of solar cells
518
Preparation of WO3 aerogel catalysts using supercritical CO2 drying
519
Preparation of WO3 nanoparticles and application to NO2 sensor
520
Preparation of WO3 Nanoparticles Using Cetyl Trimethyl Ammonium Bromide Supermolecular Template
521
Preparation of wood apple (Feronia limonia L.) seed protein concentrate and evaluation of its nutritional and functional characteristics
522
Preparation of WS2 catalysts by in situ decomposition of tetraalkylammonium thiotungstates Original Research Article
523
Preparation of W–Sc2O3 targets and scandate cathodes with film prepared by pulsed laser deposition
524
Preparation of wurtzite GaN-based magnetic alloy semiconductors by molecular beam epitaxy
525
Preparation of x(Ni0.65Zn0.35Fe2O4)/(100 − x)SiO2 nanocomposite powders by a modified sol–gel method
526
Preparation of xanthan gum injection and its protective effect on articular cartilage in the development of osteoarthritis
527
Preparation of Xanthan Magnetic Biocompatible Nano-Composite for Removal of Ni^2+ from Aqueous Solution
528
Preparation of xanthan-derived oligosaccharides and their hydroxyl radical scavenging activity
529
Preparation of xylan citrate—A potential adsorbent for industrial wastewater treatment
530
Preparation of Y2BaCuO5 nanoparticles by a co-precipitation process with the aid of ultrasonic irradiation
531
Preparation of Y2O3 thin films deposited by pulse ultrasonic spray pyrolysis
532
Preparation of Y2O3:Er,Yb nanoparticles by laser ablation in liquid
533
Preparation of Y2O3:Eu phosphor without post-treatment by gas phase reaction
534
Preparation of Y2O3:Eu3+ nanopowders via polymer complex solution method and luminescence properties of the sintered ceramics
535
Preparation of Y2O3–Al2O3–SiO2 glasses by combustion synthesis melt–casting under high gravity
536
Preparation of YAG ceramics through a novel process
537
Preparation of YAG nano-powders via an ultrasonic spray co-precipitation method
538
Preparation of YAG powders and ceramics through mixed precipitation method
539
Preparation of YAG:Nd nano-sized powder by co-precipitation method
540
Preparation of YAG:Nd nano-sized powder by co-precipitation method
541
Preparation of YAG:Nd nano-sized powder by co-precipitation method
542
Preparation of Y-Al2O3 and prioritization of affecting factors on the crystallite size using Taguchi method
543
Preparation of YBa2Cu3O7-x superconducting thick films by the electrophoretic deposition method
544
Preparation of Y-Ba-Cu-O films by ion-beam sputtering with a hollow cathode oxidation
545
Preparation of YBCO coated conductor by the TFA-MOD method
546
Preparation of YBO3:Dy3+,Bi3+ phosphors and enhanced photoluminescence
547
Preparation of Y-H3PW12O40/TiO2 and La-H3PW12O40/TiO2 by hydrothermal method and its photocatalytic activity for dinitrotoluene decomposition
548
Preparation of YSZ coatings by thermal pressure and filtration of sol–gel paint (TPFSP) for thermal barrier application
549
Preparation of YSZ electrolyte coatings for SOFC by electron beam physical vapor deposition combined with a sol infiltration treatment
550
Preparation of YSZ film by gravity-electrophoretic deposition and its application in SOFC
551
Preparation of YSZ films by magnetron sputtering for anode-supported SOFC
552
Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method
553
Preparation of YSZ/Al2O3 micro-laminated coatings and their influence on the oxidation and spallation resistance of MCrAlY alloys
554
Preparation of yttria stabilized zirconia membranes on porous substrates by a dip-coating process
555
Preparation of yttria-stabilised zirconia (YSZ) hollow fibre membranes Original Research Article
556
Preparation of yttria-stabilized zirconia (YSZ) films on La0.85Sr0.15MnO3 (LSM) and LSM–YSZ substrates using an electrophoretic deposition (EPD) process
557
Preparation of yttrium oxide coating by MOCVD as tritium permeation barrier
558
Preparation of Y-TZP ceramic fibers by electrolysis-sol-gel method
559
Preparation of yuanhuacine and relative daphne diterpene esters from Daphne genkwa and structure–activity relationship of potent inhibitory activity against DNA topoisomerase I Original Research Article
560
Preparation of zein-based membranes and their pervaporation for ethanol aqueous solution Original Research Article
561
Preparation of Zeolite A Tubes from Amorphous Aluminosilicate Extrudates
562
Preparation of zeolite MFI membranes on alumina hollow fibers with high flux for pervaporation
563
Preparation of zeolite MFI membranes on defective macroporous alumina supports by a novel wetting–rubbing seeding method: Role of wetting agent
564
Preparation of zeolite NaA membranes on the inner side of tubular supports by means of a controlled seeding technique
565
Preparation of Zeolite T Membranes with Different Ratios of Water and SiO_2
566
Preparation of zeolite/carbon foam monolithic composites with a hierarchical structure
567
Preparation of zeolite-A/chitosan hybrid composites and their bioactivities and antimicrobial activities
568
Preparation of zeolite-coated pervaporation membranes for the integration of reaction and separation
569
Preparation of ZIF-8 membranes supported on ceramic hollow fibers from a concentrated synthesis gel
570
Preparation of zinc borates with different structures and morphologies and their effect on thermal and oxidative stability of polyvinyl alcohol
571
Preparation of zinc ferrite by high-energy ball-milling and microstructure characterization by Rietveld’s analysis
572
Preparation of zinc ferrite in the presence of carbon material and its application to hot-gas cleaning
573
Preparation of zinc gluconate nanostructures with different shapes by lamellar liquid crystal template
574
Preparation of zinc oxide (ZnO) powders with different types of morphology by a combustion synthesis method
575
Preparation of zinc oxide ceramics with a sustainable antibacterial activity under dark conditions
576
Preparation of zinc oxide nanoparticles coated with homogeneous Al2O3 layer
577
Preparation of zinc oxide varistor by a wet chemical method
578
Preparation of zinc oxide varistor by a wet chemical method
579
Preparation of zinc titanate nanoparticles and their photocatalytic behaviors in the photodegradation of humic acid in water
580
Preparation of zircon bodies from amorphous precursor powder synthesized by sol-gel processing
581
Preparation of zirconia aerogel by heating of alcohol–aqueous salt solution
582
Preparation of zirconia dental crowns via electrophoretic deposition
583
Preparation of zirconia mullite flakes via a plasma rapid solidification process using starting materials derived from a sol–gel technique
584
Preparation of Zirconia Nanocrystals from Concentrated Zirconium Aqueous Solutions
585
Preparation of zirconia powders by sol–gel route of sodium glycozirconate complex
586
Preparation of zirconia xerogels and ceramics by sol–gel method and the analysis of their thermal behavior
587
Preparation of zirconia-based acid catalysts from zirconia aerogel of tetragonal phase Original Research Article
588
Preparation of zirconia–mullite composites by an infiltration route
589
Preparation of zirconia-supported hydrodesulphurisation catalysts by water-assisted spreading Original Research Article
590
Preparation of zirconium oxide thin film using inductively coupled oxygen plasma sputtering
591
Preparation of zirconium phosphate (ZrP)/Nafion1135 composite membrane and H+/VO2+ transfer property investigation
592
Preparation of Zirconium Phosphate Nanoparticles and Its Application in the Protection of Aldehydes
593
Preparation of zirconium tungstate (ZrW2O8) by the amorphous citrate process
594
Preparation of Zn doped Cu(In,Ga)Se2 thin films by physical vapor deposition for solar cells
595
Preparation of Zn(In)Se films from alloyed precursors
596
Preparation of Zn3B10O18·14H2O nanomaterials and their thermochemical properties
597
Preparation of ZnAl2O4-based microwave dielectric ceramics and GPS antenna by aqueous gelcasting
598
Preparation of Zn-doped β-tricalcium phosphate (β-Ca3(PO4)2) bioceramics
599
Preparation of ZnFe2O4 nanoparticles in the template of silk-fibroin peptide and their neuro-cytocompability in PC12 cells
600
Preparation of ZnFe2O4/SiO2 and CdFe2O4/SiO2 nanocomposites by sol–gel method
601
Preparation of ZnIn2S4/fluoropolymer fiber composites and its photocatalytic H2 evolution from splitting of water using Xe lamp irradiation
602
Preparation of Zn–In–S film electrodes using chemical bath deposition for photoelectrochemical applications
603
Preparation of ZnMgO:Ga thin films on flexible substrates by pulsed laser deposition
604
Preparation of Zn–Mg–rare earth quasicrystals and related crystalline phases
605
Preparation of Zn–Mg–rare earth quasicrystals and related crystalline phases
606
Preparation of ZnNb2O6–TiO2 microwave dielectric ceramics for multi-layer cofired component
607
Preparation of ZnNiMo/γ-alumina catalysts from recycled Ni for hydrotreating reactions Original Research Article
608
Preparation of ZnO bulk porous nanosolids of different pore diameters by a novel solvothermal hot press (STHP) method
609
Preparation of ZnO nanocatalyst supported on todorokite and photocatalytic efficiency in the reduction of chromium (VI) pollutant from aqueous solution
610
Preparation of ZnO nanocrystals via ultrasonic irradiation
611
Preparation of ZnO Nanocrystals with Desired Morphology from Coordination Polymers through a Solid-state Decomposition Route
612
Preparation of ZnO nanoparticles and nanosheets and their application to dye-sensitized solar cells
613
Preparation of ZnO nanoparticles in amphiphilic gel network
614
Preparation of ZnO nanoparticles in inner porous of SBA-15 and investigation its photoluminescence properties
615
Preparation of ZnO nanoparticles localized on SiC@SiO2 nanocables by a physical templating method
616
Preparation of ZnO nanoparticles using the direct precipitation method in a membrane dispersion micro-structured reactor
617
Preparation of ZnO nanopowder by a novel ultrasound assisted non-hydrolytic sol–gel process and its application in photocatalytic degradation of C.I. Acid Red 249
618
Preparation of ZnO nanopowders by thermal plasma and characterization of photo-catalytic property
619
Preparation of ZnO nanorod arrays with tailored defect-related characterisitcs and their effect on the ethanol gas sensing performance
620
Preparation of ZnO nanorod by solvothermal reaction of zinc acetate in various alcohols
621
Preparation of ZnO Nanorods and optical characterizations
622
Preparation of ZnO nanorods and special lath-like crystals by aqueous chemical growth (ACG) method
623
Preparation of ZnO nanorods by microemulsion synthesis and their application as a CO gas sensor
624
Preparation of ZnO nanosheets by a novel microemulsion-based hydrothermal method
625
Preparation of ZnO particle with novel nut-like morphology by ultrasonic pretreatment and its luminescence property
626
Preparation of ZnO particle with novel nut-like morphology by ultrasonic pretreatment and its luminescence property
627
Preparation of ZnO particles by precipitation transformation method and its inherent formation mechanisms
628
Preparation of ZnO thin films for high-resolution field emission display by electron beam evaporation
629
Preparation of ZnO thin films on various substrates by pulsed laser deposition
630
Preparation of ZnO thin films using MOCVD technique with D2O/H2O gas mixture for use as TCO in silicon-based thin film solar cells
631
Preparation of ZnO varistors by solution nano-coating technique
632
Preparation of ZnO:CeO2–x thin films by AP-MOCVD: Structural and optical properties
633
Preparation of ZnO–Al2O3 Particles in a Premixed Flame
634
Preparation of ZnO-coated TiO2 electrodes using dip coating and their applications in dye-sensitized solar cells
635
Preparation of ZnO-doped Al films by spray pyrolysis technique
636
Preparation of ZnO-glass varistor from tetrapod ZnO nanopowders
637
Preparation of ZnO-Polystyerne Composite Films and Investigation of Antibacterial Properties of ZnO-Polystyerne Composite Films
638
Preparation of ZnS microdisks using chemical bath deposition and ZnS/p-Si heterojunction solar cells Original Research Article
639
PREPARATION OF ZnS NANOPARTICLES BY ELECTROSPRAY PYROLYSIS
640
Preparation of ZnS nanorods by ultrasonic waves
641
Preparation of ZnS thin films by the pulsed electrochemical deposition
642
Preparation of ZnS-CdS fine particles by the spray-pyrolysis
643
Preparation of ZnSe films through chemical solution reduction process
644
Preparation of ZnSe quantum dots embedded in SiO2 thin films by sol–gel process
645
Preparation of ZnS-PSA Nanocomposites by in situ Simultaneous Polymerization-precipitation of ZnS Nanoparticles Using (gamma)-Radiation
646
Preparation of Znx(O,S)y thin films using modified chemical bath deposition method
647
Preparation of Zoledronate liposome and its impact on apoptosis of Kupffer cells in rat liver
648
Preparation of Zr1−x AlxO2 by annealing of ZrOx/Al thin films in the air atmosphere
649
Preparation of ZrC by self-propagating high-temperature synthesis
650
Preparation of ZrC nano-particles reinforced amorphous carbon composite coating by atmospheric pressure chemical vapor deposition
651
Preparation of ZrO2 porous nanosolid and its composite fluorescent materials
652
Preparation of ZrO2 ultrathin films as gate dielectrics by limited reaction sputtering—On growth delay time at initial growth stage
653
Preparation of ZrO2/Al2O3-pillared Saponite and Its Spectroscopic Investigation on NOX Adsorption
654
Preparation of ZrO2/Gd2O3 composite ceramic materials by coprecipitation method
655
Preparation of ZrO2–Al2O3 composite membranes by sol–gel process and their characterization
656
Preparation of ZrO2–Al2O3 composite membranes by sol–gel process and their characterization
657
Preparation of ZrO2-supported MgO with high surface area and its use in mercaptan oxidation of jet fuel Original Research Article
658
Preparation of ZSM-5 nanoparticles supported on carbon substrate Original Research Article
659
Preparation of ZSM-5 zeolite film and its formation mechanism
660
Preparation of ZTA ceramic by aqueous gelcasting with a low-toxic monomer DMAA
661
Preparation of Zwitterionic Polymethacrylamide Modified with L-Lysine and Its Effect on Fibrinolytic Activity
662
Preparation of α and β anomers of 1,2,3,6-tetra-O-acetyl-4-chloro-4-deoxy-d-galactopyranose based upon anomerization and kinetic acetylation
663
Preparation of α- and β-d-glucoseptanose pentaacetates
664
Preparation of α- and β-dienyl glycosides used as dienes in aqueous Diels-Alder reactions. Influence of the carbohydrate moiety on the thermodynamics of the reaction
665
Preparation of α- and β-substituted alanine derivatives by α-amidoalkylation or Michael addition reactions under heterogeneous catalysis assisted by microwave irradiation
666
Preparation of α- or β-trifluoromethylated vinylstannanes and their cross-coupling reactions
667
Preparation of α,n-dilithiotoluene equivalents. Synthesis of tamoxifen
668
Preparation of α,α-difluoroalkanesulfonic acids
669
Preparation of α,β-unsaturated esters and amides via external-CO-free palladium-catalyzed carbonylation of alkenyl tosylates
670
Preparation of α-alumina coated carbide tools by the sol-gel process
671
Preparation of α-alumina coated carbide tools by the sol-gel process
672
Preparation of α-amino-carboxylic acid derivatives via diastereoselective reactions of glycine enolate equivalents
673
Preparation of α-aminophosphines on solid support: model studies and parallel synthesis
674
Preparation of α-calcium sulfate hemihydrate from FGD gypsum in K, Mg-containing concentrated CaCl2 solution under mild conditions
675
Preparation of α-Fe2O3 Nano-photocatalyst supported on Cd(II)-Terephthalic MOF for photocatalytic removal of Cefazolin aqueous solution
676
Preparation of α-functionalized alkenylmagnesium reagents via a halide–magnesium exchange
677
Preparation of α-keto ester enol acetates as potential prodrugs of human neutrophil elastase inhibitors
678
Preparation of α-ketophosphonates by a [3,3]-sigmatropoic shift of enolphosphonates
679
Preparation of α-ketophosphonates by oxidation of α-hydroxyphosphonates with neutral alumina supported potassium permanganate (NASPP) under solvent-free conditions and potassium permanganate in dry benzene
680
Preparation of α-LiFeO2-based cathode materials by an ionic exchange method
681
Preparation of α-MnMoO4 at ultra-low temperature on an organic substrate
682
Preparation of α-silyl- or α,α-bis(silyl)-substituted alkylcopper reagents and their synthetic use
683
Preparation of α-sources of U(VI) and Th(IV) by the electrodeposition technique in the presence of Ca2+ and some trivalent metals
684
Preparation of α-substituted allylboronates by chemoselective iridium-catalyzed asymmetric allylic alkylation of 1-propenylboronates
685
Preparation of α-substituted γ-alkoxyallylstannanes from β-tributylstannyl acrolein acetals: scope of the method and primary rationalization of the obtained results
686
Preparation of β-amino-α-mercapto acids and amides: stereocontrolled syntheses of 2′-sulfur analogues of the taxol C-13 side chain, both syn and anti S-acetyl-N-benzoyl-3-phenylisocysteine
687
Preparation of β-Ca3(PO4)2 bioceramic powder from calcium carbonate and phosphoric acid
688
Preparation of β-cyclodextrin–polyaniline complex in supercritical CO2
689
Preparation of β-dicalcium silicate (β-C2S) and calcium sulfoaluminate phases using non-traditional nano-materials
690
Preparation of β-fluoro- and β,β-difluoro-histidinols
691
Preparation of β-hydroxyesters from isoxazolines. A selective Ni0bpy-catalyzed electrochemical method
692
Preparation of β-lactams by [2+2] cycloaddition of ketenes and imines
693
Preparation of β-MnO2 nanorods through a γ-MnOOH precursor route
694
Preparation of β-phenylnitroethanes having electron-donating aryl substitution
695
Preparation of β-SiAlON from coal-mine schists
696
Preparation of β-SiAlON from Fly Ashes
697
Preparation of β-SiC/Al2O3 composite from kaolinite gangue by carbothermal reduction
698
Preparation of γ-Al2O3 porous nanosolid/fluorescein fluorescent nanocomposites by a simple method
699
Preparation of γ-Al2O3-supported molybdenum oxycarbide catalyst and its HDS activity
700
Preparation of γ-Bi2MoO6 thin films by thermal evaporation deposition and characterization for photocatalytic applications
701
Preparation of γ-Gd2S3 films by ultrasonic spray pyrolysis
702
Preparation of γ-Gd2S3 via thermolysis of Gd[S2CN(C4H8)]3·phen coordination
703
Preparation of γ-LiAlO2 green bodies through the gel-casting process
704
Preparation of γ-MnO2/carbon composite material by a wet chemical method
705
Preparation of γ-oxo esters by Staudinger reduction of β-azidocyclopropane esters
706
Preparation of γ-PGA/chitosan composite tissue engineering matrices
707
Preparation of γ-trimethylsilylallyldibutylstannane grafted on solid support: a clean and easily recyclable reagent for the synthesis of 2,6-disubstituted dihydropyrans
708
Preparation of δ-fluorinated homoallylic alcohol derivatives via regioselective hydride reduction of allylic alcohol derivatives
709
Preparation of π-conjugated polymers consisting of 2-decylbenzimidazole and thiophene units and chemical properties of the polymers
710
Preparation of π-conjugated polythiazoles and their electrically conducting properties
711
Preparation ofALPHA-MnO2with an Open Tunnel
712
Preparation Pilocarpine Hydrochloride Selective Electrodes
713
Preparation polystyrene/multiwalled carbon nanotubes nanocomposites by copolymerization of styrene and styryl-functionalized multiwalled carbon nanotubes
714
Preparation process and properties of exfoliated graphite nanoplatelets filled Bisphthalonitrile nanocomposites Original Research Article
715
Preparation process and properties of LiCoO2/PANI/dodecylbenzenesulfonate composite electrode materials
716
Preparation process to affect stability in waste polyethylene-modified bitumen
717
Preparation processes and properties of expanded graphite for alkaline batteries Original Research Article
718
Preparation protocols for high-activity Photosystem II membrane particles of green algae and higher plants, pH dependence of oxygen evolution and comparison of the S2-state multiline signal by X-band EPR spectroscopy
719
Preparation Rate of Environmental Health Operational Teams in Facing with Crisis of Drinking Water in Disasters
720
Preparation Ru, Bi monolayer modified Pt nanoparticles as the anode catalyst for methanol oxidation
721
Preparation Smart pH Biodegradable Film based on Potato starch/𝘊𝘰𝘭𝘦𝘶𝘴 𝘴𝘤𝘶𝘵𝘦𝘭𝘭𝘢𝘳𝘪𝘰𝘪𝘥𝘦𝘴 Anthocyanin Extract /Nano-Zinc Oxide for Monitoring Chicken Fillets
722
Preparation steps in environmental trace element analysis — facts and traps
723
Preparation strategies of thermo-sensitive P(NIPAM-co-AA) microspheres with narrow size distribution
724
Preparation Strategy for Uniformly Sized, PolymerBased HPLC Packing Materials Having Practically Acceptable Column Efficiency. 1. Copolymerization Technique
725
Preparation structure and dielectric behaviour of the system Sr1–xLaxTi1–xFexO3 (x £ 0×50)
726
Preparation structure and physical properties of new silver lanthanide molybdenum oxides [AgLnMo2O8 (Ln = La-Nd and Sm)]
727
Preparation Technology and Performances of Zn-Cr Coating on Sintered NdFeB Permanent Magnet
728
Preparation technology for semi-fluid high-energy food
729
Preparation temperature effect on the synthesis of various carbon nanostructures
730
Preparation TiO2/Al2O3 composite hollow fibre membranes
731
Preparation to manufacturing of ITER plasma facing components in Russia
732
Preparation via solid-state reaction at room temperature and characterization of layered nanocrystalline NH4MnPO4·H2O Original Research Article
733
Preparation via solvated metal atoms and surface reactivity of homo and heteronanostructured metal particles: supported and unsupported Rh nanoaggregates
734
Preparation with a facile template-free method of uniform-sized mesoporous microspheres of rare earth (La, Ce, Pr, Nd) oxides
735
Preparation yttria-stabilized zirconia electrolyte by spark-plasma sintering
736
Preparation yttria-stabilized zirconia electrolyte by spark-plasma sintering
737
Preparation yttria-stabilized zirconia electrolyte by spark-plasma sintering
738
Preparation ZnO Thin Film by using Sol-gel-processed and determination of thickness and study optical properties
739
Preparation, adhesion and barrier properties of bituminous composite coatings on steel 37
740
Preparation, amphiphilic properties and lyotropic phase behaviour of new surfactants based on sodium monoalkyl α,ω-dicarboxylates
741
Preparation, antiangiogenic and antitumoral activities of the chemically sulfated glucan from Phellinus ribis
742
Preparation, antimicrobial evaluation and mutagenicity of differently substituted [2-hydroxyaryl]-[1-methyl-5-nitro-1H-2-imidazolyl]methanols
743
Preparation, antimicrobial evaluation, and mutagenicity of [2-hydroxyaryl]-[1-methyl-5-nitro-1H-2-imidazolyl]methanols, [5-tert-Butyl-2-methylaminophenyl]-[1-methyl-5-nitro-1H-2-imidazolyl]methanol, and [2-Hydroxyaryl]-[1-methyl-5-nitro-1H-2-imidazolyl] k
744
Preparation, antimicrobial, crystallization and mechanical properties of nano-ZnO-supported zeolite filled polypropylene random copolymer composites
745
Preparation, antioxidant and antitumor activities in vitro of different derivatives of levan from endophytic bacterium Paenibacillus polymyxa EJS-3
746
Preparation, authentication, rheology and conformation of theta carrageenan
747
Preparation, authentication, rheology and conformation of theta carrageenan
748
Preparation, Biodistribution, and Dosimetry of 188Re-Labeled MoAb ior ceal and Its F(ab)2 Fragments by Avidin-Biotin Strategy
749
Preparation, biological activity and endogenous occurrence of N6-benzyladenosines Original Research Article
750
Preparation, biomimetic apatite induction and osteoblast proliferation test of TiO2-based coatings containing P with a graded structure
751
Preparation, cell response and apatite-forming ability of microarc oxidized coatings containing Si, Ca and Na on titanium
752
Preparation, cellular transport, and activity of polyamidoamine-based dendritic nanodevices with a high drug payload
753
Preparation, chain conformation and anti-tumor activities of water-soluble phosphated (1 → 3)-α-d-glucan from Poria cocos mycelia
754
Preparation, characterisation and activity of chromia–zirconia catalysts for propane dehydrogenation
755
Preparation, characterisation and activity of nickel supported on silica-titania Original Research Article
756
Preparation, characterisation and activity of the inclusion complex of paeonol with β-cyclodextrin
757
Preparation, characterisation and application of europium(III) chelate-dyed polystyrene–acrylic acid nanoparticle labels Original Research Article
758
Preparation, characterisation and applications of thin films for gas sensors prepared by cheap chemical method
759
PREPARATION, CHARACTERISATION AND BIOLOGICAL ACTIVITIES OF SOME METAL COMPLEXES OF NEW N [4-BI(5-THION-1,3,4-OXADIAZOLE-2YL)METHANE)METYL] DIBUTYL AMINE AND THEORETICAL STUDY
760
Preparation, characterisation and catalytic activity of Cusingle bondZn-based manganites obtained from carbonate precursors Original Research Article
761
Preparation, characterisation and catalytic activity of pure and substituted La-hexaaluminate systems for high temperature catalytic combustion
762
Preparation, characterisation and catalytic evaluation of MgF2 supported V2O5 catalysts for ammoxidation of 3-picoline Original Research Article
763
Preparation, characterisation and catalytic performance for soot oxidation of copper-containing ZnAl2O4 spinels Original Research Article
764
Preparation, characterisation and crystal structure of two zinc(II) benzoate complexes with pyridine-based ligands nicotinamide and methyl-3-pyridylcarbamate
765
Preparation, characterisation and dissolution of a CeO2 analogue for UO2 nuclear fuel
766
Preparation, characterisation and field-testing of a biodegradable sodium alginate-based spray mulch
767
Preparation, Characterisation and In vivo Evaluation of Bis-demethoxy Curcumin Analogue (BDMCA) Nanoparticles
768
Preparation, Characterisation and In Vivo Evaluation of Silybin Nanoparticles for the Treatment of Liver Fibrosis
769
Preparation, characterisation and physicochemical properties of the phosphate modified peanut protein obtained from Arachin Conarachin L.
770
Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering
771
Preparation, characterisation and reactivity of polydimethylsiloxane membranes for selective oxidation of benzene to phenol Original Research Article
772
Preparation, characterisation and selected functional properties of sodium caseinate–maltodextrin conjugates
773
Preparation, characterisation and sensing application of inkjet-printed nanostructured TiO2 photoanode
774
Preparation, characterisation and study of in vitro biologically active azamacrocyclic Cu(II) dicarboxylate complexes
775
Preparation, characterisation and testing of catalytic polymeric membranes in the oxidation of benzene to phenol Original Research Article
776
Preparation, characterisation of thermally treated Algerian dolomite powders and application to azo-dye adsorption
777
Preparation, characteristics and electrochemical properties of surface-modified LiMn2O4 by doped LiNi0.05Mn1.95O4
778
Preparation, Characterization and Abrasion Resistance Property of Melamine Formaldehyde / Montmorillonite Nanocomposite Coatings
779
Preparation, characterization and acetone sensing properties of Ce-doped SnO2 hollow spheres
780
Preparation, characterization and activities of the nano-sized Ni/SBA-15 catalyst for producing COx-free hydrogen from ammonia Original Research Article
781
Preparation, characterization and activity evaluation of CaZrTi2O7 photocatalyst
782
Preparation, characterization and activity evaluation of heterojunction ZrTi2O6/TiO2 photocatalyst
783
Preparation, characterization and activity evaluation of p–n junction photocatalyst p-ZnO/n-TiO2
784
Preparation, characterization and activity of novel silica-pillared layered titanoniobate supported copper catalysts for the direct decomposition of NO
785
Preparation, characterization and activity testing of vanadia catalysts deposited onto silica and alumina supports by atomic layer deposition Original Research Article
786
Preparation, characterization and adsorption behavior of tannin-modified poly(glycidylmethacrylate)-grafted zirconium oxide-densified cellulose for the selective separation of bovine serum albumin
787
Preparation, Characterization and Adsorption Evaluation of old Newspaper Fibres using Basket Reactor (Nickel Removal by Adsorption)
788
Preparation, characterization and adsorption properties of chitosan modified magnetic graphitized multi-walled carbon nanotubes for highly effective removal of a carcinogenic dye from aqueous solution
789
Preparation, characterization and adsorptive study of rare earth ions using magnetic GMZ bentonite
790
Preparation, characterization and aggregation behavior of amphiphilic chitosan derivative having poly (l-lactic acid) side chains
791
Preparation, characterization and analyses of carbons with natural and induced calcium compounds for the adsorption of fluoride
792
Preparation, characterization and analyses of carbons with natural and induced calcium compounds for the adsorption of fluoride
793
Preparation, characterization and analytical application of a hybrid organic–inorganic silica-based monolith
794
Preparation, characterization and analytical application of electropolymerized films
795
Preparation, characterization and analytical applications of a new and novel electrically conducting fibrous type polymeric–inorganic composite material: polypyrrole Th(IV) phosphate used as a cation-exchanger and Pb(II) ion-selective membrane electrode
796
Preparation, characterization and antibacterial activity of chitosan–Ca3V10O28 complex membrane
797
Preparation, Characterization and Antibacterial Activity of Manganese Oxide Nanoparticles
798
Preparation, Characterization and Antibacterial Activity of some New Oxazolidin-5-one Derivatives Derived from Imine Compounds
799
Preparation, characterization and antibacterial activity of water-soluble O-fumaryl-chitosan
800
Preparation, characterization and antibacterial applications of ZnO-nanoparticles coated polyethylene films for food packaging
801
Preparation, characterization and antibacterial properties of cyanoethylchitosan/cellulose acetate polymer blended films
802
Preparation, Characterization and Antibacterial Properties of Silver-Chitosan Nanocomposites Using Different Molecular Weight Grades of Chitosan
803
Preparation, Characterization and Antibacterial Property of Cerium Substituted Hydroxyapatite Nanoparticles
804
Preparation, Characterization and Antibacterial Studies of New 2-(naphthalene-2-yl)-2-(naphthalene 2ylamino) Acetonitrile Ligand with Some Metal Ions
805
Preparation, characterization and antifouling property of polyethersulfone–PANI/PMA ultrafiltration membranes Original Research Article
806
Preparation, characterization and anti-Helicobacter pylori activity of Bi3+-hyaluronate complex
807
Preparation, characterization and anti-Helicobacter pylori activity of Bi3+-hyaluronate complex
808
Preparation, characterization and antimicrobial activity of 6-amino-6-deoxychitosan
809
Preparation, characterization and antimicrobial activity of biopolymer based nanocomposite ion exchanger pectin zirconium(IV) selenotungstophosphate: Application for removal of toxic metals
810
Preparation, characterization and antimicrobial activity of chitosan/layered silicate nanocomposites
811
Preparation, characterization and antimicrobial activity of chitosan–Zn complex
812
Preparation, characterization and antimicrobial activity of quaternized carboxymethyl chitosan and application as pulp-cap
813
Preparation, Characterization and Antimicrobial Activity Study of Some Transition Metal Complexes of 4-Flourophenyl -4-Nitrobenzylidene
814
Preparation, characterization and antimicrobial efficiency of Ag/PDDA-diatomite nanocomposite
815
Preparation, characterization and antimicrobial property of ag+- nano Chitosan/ZSM-5: novel Hybrid Biocomposites
816
Preparation, characterization and antimicrobial property of micro-nano sized Na-borosilicate glass powder with spherical shape
817
Preparation, characterization and antioxidant activity of two partially N-acetylated chitotrioses
818
Preparation, characterization and antioxidant property of water-soluble ferulic acid grafted chitosan
819
Preparation, characterization and applicability of cellulose acetate–polyurethane blend membrane in separation techniques
820
Preparation, characterization and application in BSA solution of silica ceramic membranes Original Research Article
821
Preparation, characterization and application in wastewater treatment of a novel thermal stable composite membrane
822
Preparation, characterization and application of 1,4-disulfopiperazine-1,4-diium chloride ([Piper-(SO3H)2]·2Cl) as an efficient dicationic ionic catalyst for the N-Boc protection of amines
823
Preparation, characterization and application of a catalytic NaA membrane for CH4/CO2 reforming to syngas Original Research Article
824
Preparation, characterization and application of a nanostructured composite: Octakis(cyanopropyldimethylsiloxy)octasilsesquioxane
825
Preparation, characterization and application of a new kind of mesoporous composite
826
preparation, characterization and application of a novel organic-inorganic hybrid magnetic nanomaterial as a highly efficient catalyst for the synthesis of bis-coumarins
827
Preparation, characterization and application of a novel thermal stable composite nanofiltration membrane
828
Preparation, characterization and application of a stationary chromatographic phase from a new (+)-tartaric acid derivative
829
Preparation, characterization and application of alkaline leached CuNiZn ternary coatings for long-term electrolysis in alkaline solution
830
Preparation, characterization and application of alkanethiol self-assembled monolayers modified with tetrathiafulvalene and glucose oxidase at a gold disk electrode
831
Preparation, characterization and application of bilayer surfactant-stabilized ferrofluids
832
Preparation, characterization and application of Cr2O3/ZnO catalysts for methanol synthesis
833
Preparation, characterization and application of Fe3O4/ZnO core/shell magnetic nanoparticles
834
Preparation, characterization and application of functional polyethersulfone membranes blended with poly (acrylic acid) gels
835
Preparation, characterization and application of heterogeneous solid base catalyst for biodiesel production from soybean oil
836
Preparation, characterization and application of magnetic silica nanoparticle functionalized multi-walled carbon nanotubes
837
Preparation, Characterization and Application of Mg(OH)2-PAM Inorganic-Organic Composite Polymer in Removing Reactive Dye
838
Preparation, characterization and application of Nano CdS doped with alum composite electrolyte Original Research Article
839
Preparation, characterization and application of octadecyl modified magnesium oxide microspheres Original Research Article
840
Preparation, characterization and application of organic–inorganic hybrid caffeine imprinted monolith
841
Preparation, characterization and application of organic–inorganic hybrid ractopamine multi-template molecularly imprinted capillary monolithic column Original Research Article
842
Preparation, characterization and application of platinum catalysts immobilized on clays
843
Preparation, characterization and application of polymeric diols with comb-branched structure and their nanocomposites containing montmorillonites
844
Preparation, characterization and application of Pt–Ru–Sn/C trimetallic electrocatalysts for ethanol oxidation in direct fuel cell
845
Preparation, characterization and application of pyrene-loaded methoxy polyT(ethylene glycol)–poly(lactic acid) copolymer nanoparticles
846
Preparation, characterization and application of superparamagnetic iron oxide encapsulated with N-[(2-hydroxy-3-trimethylammonium) propyl] chitosan chloride
847
Preparation, Characterization and Application of Vitamin-E fortified Nanocoatings on Fresh-cut Apples
848
Preparation, characterization and application of β-cyclodextrin-glutaraldehyde crosslinked membrane for the enantiomeric separation of amino acids Original Research Article
849
Preparation, characterization and applications of novel carbon and nitrogen codoped TiO2 nanoparticles from annealing TiN under CO atmosphere
850
Preparation, characterization and benchmarking of agarose from Gracilaria dura of Indian waters
851
Preparation, characterization and bifunctional catalytic properties of MOF(Fe/Co) catalyst for oxygen reduction/evolution reactions in alkaline electrolyte
852
Preparation, characterization and biocompatibility of poly(ethylene glycol)-poly(n-butyl cyanoacrylate) nanocapsules with oil core via miniemulsion polymerization
853
Preparation, characterization and biocompatibility studies on risperidone-loaded solid lipid nanoparticles (SLN): High pressure homogenization versus ultrasound
854
Preparation, characterization and biodegradation of biopolymer nanocomposites based on fumed silica
855
Preparation, characterization and biological activity of Schiff base compounds derived from 8-hydroxyquinoline-2-carboxaldehyde and Jeffamines ED®
856
Preparation, Characterization and Biological Evaluation of some Lanthanide (ΙΙΙ) ions Complexes with 3-(1-methyl-2-benzimidazolylazo)-Tyrosine
857
Preparation, characterization and biological properties of Gellan gum films with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide cross-linker
858
Preparation, characterization and biological relevance of calcium(II)/diethylmalonate(-1,-2) complexes
859
Preparation, Characterization and Biological Study of New Derivatives of 1, 3, 4 - Thiadiazoleand Its Complexes with Some Transitional Element Ions
860
Preparation, characterization and biological test of 3D-scaffolds based on chitosan, fibroin and hydroxyapatite for bone tissue engineering
861
Preparation, characterization and catalyst application of ternary interpenetrating networks of poly 4-methyl vinyl pyridinium hydroxide–SiO2–Al2O3
862
Preparation, characterization and catalytic activity of Co–Zn-based manganites obtained from carbonate precursors
863
PREPARATION, CHARACTERIZATION AND CATALYTIC ACTIVITY OF CuO/TS-1 ON BENZENE HYDROXYLATION REACTION
864
Preparation, characterization and catalytic activity of dendrimer-encapsulated phosphotungstic acid nanoparticles immobilized on nanosilica for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones under solvent-free or sonochemical conditions
865
Preparation, characterization and catalytic activity of tin oxide-supported 12-tungstophosphoric acid as a solid catalyst Original Research Article
866
Preparation, characterization and catalytic behavior of CdFe2O4 and Cd nanocrystals on AP, HTPB and composite solid propellants, Part: 79
867
Preparation, Characterization and Catalytic Behavior of Perovskites with Nominal Compositions La1-xSrxGa1–2yCuyRuyO3
868
Preparation, characterization and catalytic CO oxidation studies on LaNi1−xCoxO3 system
869
Preparation, characterization and catalytic hydroformylation properties of carbon nanotubes-supported Rh–phosphine catalyst Original Research Article
870
Preparation, characterization and catalytic oxidation property of CeO2/Cu2+- attapulgite (ATP) nanocomposites
871
Preparation, characterization and catalytic performance of HPW-TUD-1 catalyst on oxidative desulfurization
872
Preparation, characterization and catalytic performance of SrTi0.9Li0.1O3 ultrafine powders
873
Preparation, characterization and catalytic properties of CuO/CeO2 system
874
Preparation, characterization and catalytic properties of S2O82−/ZrO2-CeO2 solid superacid catalyst
875
Preparation, characterization and catalytic properties of singly and doubly titanium-modified mesoporous silica gel
876
Preparation, characterization and catalytic properties of vanadium oxides supported on calcined Mg/Al-hydrotalcite Original Research Article
877
Preparation, characterization and catalytic testing of cobalt oxide and manganese oxide catalysts supported on zirconia Original Research Article
878
Preparation, characterization and catalytic testing of GePt catalysts
879
Preparation, Characterization and Catalytic Testing over Bimetallic Pt-Pd/HZSM-5 Catalysts in NO Reduction by Propylene
880
Preparation, characterization and chlorine stability of aromatic–cycloaliphatic polyamide thin film composite membranes
881
Preparation, characterization and control release properties of Citrus medica L. essential oil-loaded particles
882
Preparation, characterization and controlled release of liver-targeting nanoparticles from the amphiphilic random copolymer
883
Preparation, Characterization and Crystal Structure of [Cu2(O2CH)4(nicotinamide)2]
884
Preparation, characterization and crystal structure of some imino Schiff bases
885
Preparation, characterization and crystal structures of three salts of the quaterpyridine ligand
886
Preparation, characterization and crystalline transition behaviors of polyamide 4 14
887
Preparation, characterization and crystalline transitions of odd–even polyamides 11,12 and 11,10
888
Preparation, characterization and curing properties of epoxy-terminated poly(alkyl-phenylene oxide)s
889
Preparation, characterization and cytocompatibility of bioactive coatings on porous calcium-silicate-hydrate scaffolds
890
Preparation, characterization and cytocompatibility of polyurethane/cellulose based liquid crystal composite membranes
891
Preparation, characterization and cytotoxicity of schizophyllan/silver nanoparticle composite
892
Preparation, characterization and deactivation studies of Co–Mo/γ–Al2O3 deoxidizing catalyst Original Research Article
893
Preparation, characterization and determination of photocatalytic activity of MCM-41/ZnO and MCM-48/ZnO nanocomposites
894
Preparation, characterization and determination of photocatalytic activity of MCM-41/ZnO and MCM-48/ZnO nanocomposites
895
Preparation, characterization and dielectric properties of 4,4-diphenylmethane diisocyanate (MDI) based cross-linked polyimide films
896
Preparation, characterization and dielectric properties of Ba5LnZnTa9O30 (Ln=La, Sm) ceramics
897
Preparation, characterization and dielectric properties of CaCu3Ti4O12 ceramics
898
Preparation, characterization and dielectric properties of temperature stable SrTiO3/PEEK composites for microwave substrate applications
899
Preparation, characterization and dielectric properties of Sr4Ln2Ti4Ta6O30 (Ln=Nd and Sm) ceramics
900
Preparation, characterization and dissolution behavior of artemisinin microparticles
901
Preparation, characterization and DNA photocleavage of diazapyrene-tethered oligothymidylates
902
Preparation, characterization and dye adsorption of Au nanoparticles/ZnAl layered double oxides nanocomposites
903
Preparation, characterization and dye adsorption properties of biocompatible composite (alginate/titania nanoparticle) Original Research Article
904
Preparation, characterization and dye adsorption properties of γ-Fe2O3/SiO2/chitosan composite
905
Preparation, characterization and effect of annealing on performance of cellulose acetate/sulfonated polysulfone and cellulose acetate/epoxy resin blend ultrafiltration membranes
906
Preparation, characterization and electrical conductances of heterometallic coordination polymers and complex bimetallic salts derived from isomaleonitriledithiolate
907
Preparation, characterization and electrical conduction mechanism of polyaniline/ordered mesoporous silica composites
908
Preparation, characterization and electrical conductivity of heterometallic complexes derived from 2-sulfanylbenzothiazolate
909
Preparation, characterization and electrical conductivity studies of nanocrystalline La doped BaMoO4
910
Preparation, characterization and electrical conductivity studies of nanocrystalline scheelite Ba1−xDyxMoO4+δ
911
Preparation, characterization and electrical properties of spinel-type environment friendly thick film NTC thermistors
912
Preparation, characterization and electrical property of Mn-doped ceria-based oxides
913
Preparation, characterization and electrocatalytic properties of polynuclear mixed-valent ruthenium oxide/hexacyanoruthenate film modified electrodes
914
Preparation, characterization and electrocatalytic studies on hybrid films of electropolymerized manganese tetra(o-aminophenyl)porphyrin and adsorbed flavins
915
Preparation, Characterization and Electrochemical Application of ZnO Nanorods for Voltammetric Determination of Hypercin using Modified Carbon Paste Electrode
916
Preparation, Characterization and Electrochemical Application of ZnS/ZnAl2S4 Nanocomposite for Voltammetric Determination of D-Penicillamine
917
Preparation, characterization and electrochemical corrosion studies on environmentally friendly waterborne polyurethane/Na+-MMT clay nanocomposite coatings
918
Preparation, characterization and electrochemical property of Sn–Fe–Mo–Al2O3 multi-phase composites Original Research Article
919
Preparation, characterization and electrochemistry of viologen-functionalized carbon nanotubes in the casting films and layer-by-layer multilayers
920
Preparation, characterization and electrolytic behavior of β-nickel hydroxide
921
Preparation, characterization and electromagnetic properties of carbon nanotubes/Fe3O4 inorganic hybrid material
922
Preparation, characterization and electronic structures of Fe-doped TiO2 nanostructured fibers
923
Preparation, characterization and enhanced adsorption performance for Cr(VI) of mesoporous NiFe2O4 by twice pore-forming method
924
Preparation, characterization and enhanced visible-light photocatalytic activities of BiPO4/BiVO4 composites
925
Preparation, characterization and enzyme inhibition of methylmethacrylate copolymer nanoparticles with different hydrophilic polymeric chains
926
Preparation, characterization and evaluation of adsorptive properties of orange peel based activated carbon via microwave induced K2CO3 activation
927
Preparation, Characterization and Evaluation of Antifungal Efficacy of Chitosan/Soy Phosphatidylcholine Topical Films Containing Griseofulvin
928
Preparation, characterization and evaluation of bufalin liposomes coated with citrus pectin
929
Preparation, characterization and evaluation of catalytic activity of titania modified with silver and bentonite
930
Preparation, Characterization and Evaluation of Drug Release Properties of Simvastatin-loaded PLGA Microspheres
931
Preparation, characterization and evaluation of Ginkgo biloba solid lipid nanoparticles
932
Preparation, characterization and evaluation of Maya crude hydroprocessing catalysts
933
Preparation, characterization and evaluation of selenite-loaded chitosan/TPP nanoparticles with or without zein coating
934
Preparation, Characterization and Evaluation of Sun Protective and Moisturizing Effects of Nanoliposomes Containing Safranal
935
Preparation, characterization and evaluation of water-soluble l-cysteine-capped-CdS nanoparticles as fluorescence probe for detection of Hg(II) in aqueous solution Original Research Article
936
Preparation, characterization and fluorimetric studies of novel photoactive poly(amide-imide) from 1-naphthaldehyde and 2,6-diaminopyridine by microwave-irradiation
937
Preparation, characterization and formation mechanism of gallium oxide nanowires
938
Preparation, characterization and gas permeation properties of a polycaprolactone based polyurethane-silica nanocomposite membrane
939
Preparation, characterization and gas permeation properties of carbon hollow fiber membranes based on Matrimid® 5218 precursor
940
Preparation, characterization and gas permeation properties of PDMS/PEI composite asymmetric membrane for effective separation of hydrogen from H2/CH4 mixed gas
941
Preparation, characterization and gas permeation properties of polyurethane–silica/polyvinyl alcohol mixed matrix membranes
942
Preparation, characterization and gas sensing properties of lead tetra-(tert-butyl)-5,10,15,20-tetraazaporphyrin spin-coating films
943
Preparation, characterization and gas sensing properties of lead tetra-(tert-butyl)-5,10,15,20-tetraazaporphyrin spin-coating films
944
Preparation, characterization and gas sensitivity of copper naphthalocyanine derivatives LB films
945
Preparation, characterization and gas sensitivity of polypyrrole/γ-Fe2O3 hybrid materials
946
Preparation, characterization and gas-sensing properties of SnO2–In2O3 nanocomposite oxides
947
Preparation, characterization and growth mechanism of platelet carbon nanofibers Original Research Article
948
Preparation, characterization and heterogeneous catalytic activity of heteropolyanion/polyaniline nanocomposite
949
Preparation, characterization and hydrolytic degradation of poly[p-dioxanone-(butylene succinate)] multiblockcopolymer
950
Preparation, characterization and hydrotreating performances of ZrO2–Al2O3-supported NiMo catalysts
951
Preparation, characterization and immunomodulatory activity of selenium-enriched exopolysaccharide produced by bacterium Enterobacter cloacae Z0206
952
Preparation, characterization and impedance studies of the superionic conducting AgI–Ag2O–CrO3–V2O5 glassy system
953
Preparation, characterization and impedance study of AgTaMP3O12 (M=Al, Ga, In, Cr, Fe and Y)
954
Preparation, characterization and in vitro analysis of novel structured nanofibrous scaffolds for bone tissue engineering
955
Preparation, characterization and in vitro anticoagulation of emodin-eluting controlled biodegradable stent coatings
956
Preparation, characterization and in vitro anti-metastasis activity of glucan derivatives
957
Preparation, characterization and in vitro antimicrobial activity of ampicillin-loaded polyethylcyanoacrylate nanoparticles
958
Preparation, characterization and in vitro antiviral activity evaluation of foscarnet-chitosan nanoparticles
959
Preparation, characterization and in vitro biocompatibility evaluation of poly(butylene terephthalate)/wollastonite composites
960
Preparation, characterization and in vitro cytotoxicity assay of curcumin loaded solid lipid nanoparticle in IMR32 neuroblastoma cell line
961
Preparation, characterization and in vitro cytotoxicity of paclitaxel-loaded sterically stabilized solid lipid nanoparticles
962
Preparation, characterization and in vitro efficacy of an acid-modified β-TCP material for dental hard-tissue remineralization
963
Preparation, characterization and in vitro efficacy of magnetic nanoliposomes containing the artemisinin and transferrin
964
Preparation, Characterization and In Vitro Evaluation of Indomethacin Loaded Solid Lipid Nanoparticles
965
Preparation, characterization and in vitro gentamicin release of porous HA microspheres
966
Preparation, characterization and in vitro release of chitosan nanoparticles loaded with gentamicin and salicylic acid
967
Preparation, characterization and in vitro release of gentamicin from coralline hydroxyapatite–gelatin composite microspheres
968
Preparation, characterization and in vitro release of microparticles based on dextran–rosuvastatin conjugate
969
Preparation, Characterization and in vitro Release Studies of Enoxaparin in Nanoparticle form and Enterically Coated Tablets Containing Different Enhancers
970
Preparation, characterization and in vitro release study of carvacrol-loaded chitosan nanoparticles
971
Preparation, Characterization and in vitro Studies of Chitosan Nanoparticles Containing Androctonus Crassicauda scorpion venom
972
Preparation, characterization and in vivo conversion of new water-soluble sulfenamide prodrugs of carbamazepine
973
Preparation, characterization and infrared emissivity properties of polymer derived coating formed on 304 steel
974
Preparation, characterization and infrared emissivity study of Ce-doped ZnO films
975
Preparation, characterization and infrared emissivity study of helical polyurethane@SiO2 core-shell composite
976
Preparation, characterization and investigation of catalytic activity for NO+CO reaction of LaMnO3 and LaFeO3 perovskites prepared via microemulsion method
977
PREPARATION, CHARACTERIZATION AND IN-VITRO RELEASE OF CONTROLLED RELEASE KETOROLAC TROMETHAMINE CELLULOSE ACETATE BUTYRATE MICROSPHERES
978
Preparation, characterization and in-vitro release of gentamicin from coralline hydroxyapatite–chitosan composite microspheres
979
Preparation, characterization and ionic conductivity studies of ZrO2 dispersed mixed halide matrix (KCl)0.9–(NaCl)0.1 Original Research Article
980
Preparation, characterization and latent heat thermal energy storage properties of micro-nanoencapsulated fatty acids by polystyrene shell
981
Preparation, characterization and lead sorption performance of alginate-SBA-15 composite as a novel adsorbent
982
Preparation, characterization and lithium-intercalation performance of different morphological molybdenum dioxide
983
Preparation, characterization and luminescence of La2TeO6 phosphor doped with Eu3+
984
Preparation, characterization and luminescence of Sm3+ or Eu3+ doped Sr2CeO4 by a modified sol-gel method
985
Preparation, characterization and luminescence properties of porous Si3N4 ceramics with Eu2O3 as sintering additive
986
Preparation, characterization and luminescent properties of a hydrous red phosphor SrB6O10·5H2O:Eu3+ with different morphologies
987
Preparation, Characterization and Luminescent Properties of MCM-41 Type Materials Impregnated with Rare Earth Complex
988
Preparation, characterization and mechanical properties of epoxidized soybean oil/clay nanocomposites
989
Preparation, characterization and mechanical properties of microarc oxidation coating formed on titanium in Al(OH)3 colloidal solution
990
Preparation, characterization and mechanical properties of Y2O3 thin film deposited on sulfonated self-assembled monolayer of 3-mercaptopropyl trimethoxysilane
991
Preparation, characterization and mechanical properties of the polylactide/perlite and the polylactide/montmorillonite composites
992
Preparation, characterization and methanol permeability of proton conducting membranes based on sulfonated ethylene-vinyl alcohol copolymer
993
Preparation, characterization and Methylene Blue adsorption of phosphoric acid activated carbons from globe artichoke leaves
994
Preparation, characterization and microstructural optimization of a thin γ-alumina membrane on a porous stainless steel substrate
995
Preparation, characterization and microwave absorption properties of barium-ferrite-coated fly-ash cenospheres
996
Preparation, characterization and microwave absorption properties of electroless Ni–Co–P-coated SiC powder
997
Preparation, characterization and microwave absorption properties of polyaniline/Co0.5Zn0.5Fe2O4 nanocomposite
998
Preparation, characterization and microwave dielectric properties of Ba(B1/2′Nb1/2)O3 [B′ = La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Yb and In] ceramics
999
Preparation, characterization and molecular electrical conductivity of an ion-pair complex and mixed-metallic coordination polymers derived from maleonitriledithiolate
1000
PREPARATION, CHARACTERIZATION AND MOLECULAR MODELS OF THE Co(II), Ni (II) AND Cu(II) COMPLEXES OF TETRADENTATE LIGAND TRIETHYLENETETRAMINE