<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Development of a micro-balance system for dust and water vapour detection in the Mars atmosphere Original Research Article
2
Development of a microbial bioassay for chlorinated and brominated hydrocarbons
3
Development of a microbial fermentation process for detoxification of gossypol in cottonseed meal
4
Development of a microbial process for the recovery of petroleum oil from depleted reservoirs at 91–96 °C
5
Development of a microbioreactor with ecto-nucleoside triphosphate diphosphohydrolase 2 (NTPDase2) immobilized on a polyacrylamide-coated capillary at the outlet
6
Development of a microcalorimeter array for wide energy band X-ray astronomy
7
Development of a microcalorimeter array for wide energy band X-ray astronomy
8
Development of a microcapillary column for detecting targeted messenger RNA molecules
9
Development of A Microchamber Array for Picoliter PCR
10
Development of a microchannel based pasteurizer for energy efficient processing of liquids
11
Development of a microchannel evaporator model for a CO2 air-conditioning system
12
Development of a microchannel reactor concerning steam reforming of methanol
13
Development of a micro-cogeneration laboratory and testing of a natural gas CHP unit based on PEM fuel cells
14
Development of a microconductometric biosniffer for detection of trimethylamine
15
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
16
Development of a micro-drilling burr-control chart for PCB drilling
17
Development of a microelectrode array sensing platform for combination electrochemical and spectrochemical aqueous ion testing
18
Development of a Microemulsion High Performance Liquid Chromatography (MELC) Method for Determination of Salbutamol in Metered-Dose Inhalers (MDIS)
19
Development of a microfabricated electrochemical-cantilever hybrid platform
20
Development of a microfabricated impinger for on-chip gas phase sampling Original Research Article
21
Development of a microfilter separation system coupled with a high dose of powdered activated carbon for advanced water treatment Original Research Article
22
Development of a micro-flame ionization detector using a diffusion flame
23
Development of a microfluidic biosensor for detection of environmental mycobacteria
24
Development of a microfluidic biosensor for detection of environmental mycobacteria
25
Development of a micro-forming system for micro-punching process of micro-hole arrays in brass foil
26
Development of a micro-indentation model simulating different mechanical responses of the fibre/matrix interface
27
Development of a micromachined hazardous gas sensor array
28
Development of a micro-manipulation system having a two-fingered micro-hand
29
Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures
30
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
31
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
32
Development of a micrometeorological model for the estimation of methane flux from paddy fields: Validation with standard direct measurements
33
Development of a micro-planar Ag/AgCl quasi-reference electrode with long-term stability for an amperometric glucose sensor Original Research Article
34
Development of a microporous membrane liquid–liquid extractor for organophosphate esters in human blood plasma: identification of triphenyl phosphate and octyl diphenyl phosphate in donor plasma
35
Development of a micropulverized extraction method for rapid toxicological analysis of methamphetamine in hair
36
Development of a micro-punching machine and study on the influence of vibration machining in micro-EDM
37
Development of a microreactor for the production of hydrogen from ammonia
38
Development of a microreactor-based parallel catalyst analysis system for synthesis gas conversion
39
Development of a Microscale Cell Culture Analog To Probe Naphthalene Toxicity
40
Development of a microscopic activity-based framework for analyzing the potential impacts of transportation control measures on vehicle emissions
41
Development of a micro-spectrometer system for process control application
42
Development of a microtitre plate method for determination of phenol utilization, biofilm formation and respiratory activity by environmental bacterial isolates
43
Development of a microwave assisted extraction method for the analysis of 2,4,6-trichloroanisole in cork stoppers by SIDA–SBSE–GC–MS Original Research Article
44
Development of a microwave-assisted digestion method using ICP-OES to measure metals in gum deposits of internal combustion engines
45
Development of a microwave-assisted extraction for the analysis of phenolic compounds from Rosmarinus officinalis Original Research Article
46
Development of a microwave-enhanced isotopic labelling procedure based on the Eschweiler–Clarke methylation reaction
47
Development of a microwave-type densimeter for slush hydrogen Original Research Article
48
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
49
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
50
Development of a mid-Holocene estuarine basin, Rhine–Meuse mouth area, offshore The Netherlands
51
Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC–ICP-MS
52
Development of a mild method for the extraction of anthraquinones from their aluminum complexes in madder lakes prior to HPLC analysis
53
Development of a Millisecond Pulse-Heating Apparatus
54
Development of a miniature analytical system in a lab-on-valve for determination of trace copper by bead injection spectroscopy
55
Development of a miniature cryogenic fluid circuit and a cryogenic micropump Original Research Article
56
Development of a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA), and its application to Auger photoelectron coincidence spectroscopy (APECS)
57
Development of a miniature STM holder for study of electronic conductance of metal nanowires in UHV–TEM
58
Development of a miniaturized diffusive gradients in thin films (DGT) device Original Research Article
59
Development of a miniaturized polymer electrolyte membrane fuel cell with silicon separators
60
Development of a mini-biogas digester for lighting in India
61
Development of a mini-channel evaporator model using R1234yf as working fluid
62
Development of a Minimally Invasive and Non-invasive Lipolysis Laser System for Effective Fat Reduction
63
Development of a Minimally Invasive Technique for Coronary Revascularization in a Porcine Model
64
Development of a Minimum Data Set (MDS) for C-Section Anesthesia Information Management System (AIMS)
65
Development of a Minimum Data Set (MDS) for dental implants registry
66
development of a minimum data set for drug module of computerized physician order entry system
67
Development of a mix design method for SCC based on the rheological characteristics of paste
68
Development of a mixed film lubrication model in cold rolling
69
Development of a mixed integer programming model for technology development strategy and its application to IGCC technologies
70
Development of a mixed solvent system for the efficient resolution of (R, S)-2-octanol catalyzed by magnetite-immobilized lipase
71
Development of a mixed-mode solid phase extraction method and further gas chromatography mass spectrometry for the analysis of 3-alkyl-2-methoxypyrazines in wine
72
Development of a Mixture Supply System for Machining with Minimal Quantity Lubrication
73
DEVELOPMENT OF A MOBILE APPLICATION FOR CHILDREN’S READING SKILL: LITERASI LINUS (LiLIN) MOBILE APP
74
Development of a mobile fused deposition modeling system with enhanced manufacturing flexibility
75
DEVELOPMENT OF A MOBILE MACHINE FOR PICKING PRICKLY PEAR FRUIT
76
Development of a mobile safety monitoring system for construction sites
77
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
78
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
79
Development of a mobile tracer correlation method for assessment of air emissions from landfills and other area sources
80
Development of a mobile water maker, a sustainable way to produce safe drinking water in developing countries Original Research Article
81
Development of a Mode III fatigue test method and a peel test method for tire specimens
82
Development of a Model and Sensor Based Smart Irrigation System
83
Development of a model based scoring system for diagnosis of canine disseminated intravascular coagulation with independent assessment of sensitivity and specificity
84
Development of a model compatible with solar assisted cylindrical energy storage tank and variation of stored energy with time for different phase change materials
85
Development of a model describing the effect of temperature, water activity and (gel) structure on growth and ochratoxin A production by Aspergillus carbonarius in vitro and evaluation in food matrices of different viscosity Original Research Article
86
Development of a model for assessment of biomaterial encrustation in the upper urinary tract
87
DEVELOPMENT OF A MODEL FOR DETECTION AND ESTIMATION OF DEPTH OF SHALLOW BURIED NON-METALLIC LANDMINE AT MICROWAVE X-BAND FREQUENCY
88
Development of a model for environmental risk assessment of growth promoters
89
Development of a model for environmental risk assessment of growth promoters
90
Development of a Model for Estimation of Sunshine Hour Data for Different Regions of Uganda
91
Development of a model for high precursor conversion efficiency pulsed-pressure chemical vapor deposition (PP-CVD) processing
92
Development of a model for ice core dating based on grain elongation
93
Development of a model for laparoscopic cholecystectomy video assisted training. A randomized study
94
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach
95
Development of a model for membrane filtration of long and flexible macromolecules: Application to predict dextran and linear DNA rejections in ultrafiltration
96
Development of a model for predicting trihalomethanes propagation in water distribution systems
97
Development of a model for radon concentration in indoor air Original Research Article
98
Development of a model for reactive emissions from industrial stacks
99
Development of a Model for Rural Tourism Supply Chain Management: A Case Study of Touristic Villages of Central Mazandaran, Iran
100
Development of a model for serpentine quantification in nickel laterite minerals by infrared spectroscopy
101
Development of a model for the analysis of human behavior in a smart home environment
102
Development of a model for the estimation of photosynthetically active radiation from geostationary satellite data in a tropical environment
103
Development of a model for the lean NOx catalytic reaction with hydrocarbon adsorption and desorption
104
Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations Original Research Article
105
Development of a model for the sintering of PZT multilayer ceramics and their dielectric properties
106
Development of a model for thermoeconomic design and operation optimization of a PEM fuel cell system
107
Development of a Model for Training and Evaluation of Laparoscopic Skills
108
Development of a model of tissue with potentially malignant disorders (PMD) in the hamster cheek pouch to explore the long-term potential therapeutic and/or toxic effects of different therapeutic modalities
109
Development of a model system for touristic hunting revenue collection and allocation
110
Development of a model system to study fuel autoxidation in supercritical media: decomposition kinetics of 2,2′-azobis(isobutyronitrile) in supercritical carbon dioxide
111
Development of a model to calculate asbestos fiber from damaged asbestos slates depending on the degree of damage
112
Development of a model to describe the compositional growth and dietary lysine requirements of pigs fed ractopamine
113
Development of a model to reproduce observed suspended sediment distributions in the southern North Sea using Principal Component Analysis and Multiple Linear Regression
114
Development of a model whipped cream: Effects of emulsion droplet liquid/solid character and added hydrocolloid
115
Development of a model-based netsourcing decision support system using a five-stage methodology
116
Development of a modeling approach to predict ash formation during co-firing of coal and biomass
117
Development of a modelling framework in response to new European energy-efficiency regulatory obligations: The Irish experience
118
Development of a Modern Curriculum in Software Engineering at Master Level across Countries
119
Development of a modified baited trap for detection of schistosome cercariae using natural oils rich in polyunsaturated fatty acids in Sudan
120
Development of a Modified Bromley Methodology for the estimation of ionic media effects on solution equilibria: Part 5. The chemical model of boric acid in aqueous solution at 25 °C and comparison with arsenious acid
121
Development of a modified Bromley methodology for the estimation of ionic media effects on solution equilibria: Part 6. The chemical model of phosphoric acid in aqueous solution at 25 °C and comparison with arsenic acid
122
Development of a Modified Bromleyʹs Methodology (MBM) for the estimation of ionic media effects on solution equilibria Part 1. Calculation of the interaction parameters in the molar and molal scales at 25°C
123
Development of a Modified Bromleyʹs Methodology (MBM) for the estimation of ionic media effects on solution equilibria. Part 2. Correlation of the molar and molal interaction parameters with the charge and crystal radii of the ions
124
Development of a Modified Bromleyʹs Methodology for the estimation of ionic media effects on solution equilibria: Part 3. Application to the construction of thermodynamic models
125
Development of a Modified Bromleyʹs Methodology for the estimation of ionic media effects on solution equilibria: Part 4. The chemical model of Fe(III) with the halide ligands in aqueous solution at 25°C
126
Development of a modified concrete rheometer to measure the rheological behavior of conventional and self-consolidating concretes
127
Development of a modified CVD coating process for the enhancement of the high temperature oxidation resistance of Cr2O3 and Al2O3 forming alloys
128
Development of a modified CVD coating process for the enhancement of the high temperature oxidation resistance of Cr2O3 and Al2O3 forming alloys
129
Development of a modified dry curing process for beef
130
Development of a modified electrode with amine-functionalized TiO2/multi-walled carbon nanotubes nanocomposite for electrochemical sensing of the atypical neuroleptic drug olanzapine
131
Development of a Modified Friedewald’s Formula to Calculate Low-Density Lipoprotein in an Iranian Population
132
Development of a modified sum-peak method for activity determination of some gamma emitters
133
Development of a modified sum-peak method for activity determination of some gamma emitters
134
Development of a modified vermireactor for efficient vermicomposting: a laboratory study
135
Development of a modified wiggler for higher harmonic lasing of a free-electron laser
136
Development of a modified-release hydrophilic matrix system of a plant extract based on co-spray-dried powders
137
Development of a MODIS tree cover validation data set for Western Province, Zambia
138
Development of a modular CdTe detector plane for gamma-ray burst detection below 100 keV Original Research Article
139
Development of a modular nodal method for solving three dimensional spherical harmonic equations
140
Development of a molecular detection and differentiation system for ochratoxin A producing Penicillium species and its application to analyse the occurrence of Penicillium nordicum in cured meats
141
Development of a molecular dynamics potential for Si–H systems and its application to CVD reaction processes
142
Development of a Molecular Kinetic Model and Tuning of its Required Kinetic Parameters for Thermal Cracking
143
Development of a molecular kinetic scheme for methane partial oxidation over a Rh/α-Al2O3 catalyst
144
Development of a molecular method for the rapid discrimination of red seaweeds used for agar production
145
Development of a molecularly imprinted polymer based solid-phase extraction of local anaesthetics from human plasma
146
Development of a molecularly imprinted polymer based solid-phase extraction of local anaesthetics from human plasma Original Research Article
147
Development of a molecularly imprinted polymer for pyridoxine using an ion-pair as template Original Research Article
148
Development of a molecularly imprinted polymer for selective extraction followed by liquid chromatographic determination of sitagliptin in rat plasma and urine
149
Development of a molecularly imprinted polymer for the analysis of avermectin Original Research Article
150
Development of a momentum determined electron beam in the 1–45 GeV range
151
Development of a momentum determined electron beam in the 1–45 GeV range
152
Development of a monitoring system for a PV solar plant
153
Development of a monitoring tape for ammonia gas in air by fluorescence detection
154
Development of a monitoring tape for nitrogen dioxide in air
155
Development of a Monoclonal Antibody for the Detection and Quantification of Predation on Slugs within the Arion hortensis agg. (Mollusca: Pulmonata)
156
Development of a monoclonal antibody specific to granulocytes and its application for variation of granulocytes in scallop Chlamys farreri after acute viral necrobiotic virus (AVNV) infection
157
Development of a monoclonal antibody-based competitive ELISA for detection of β-conglycinin, an allergen from soybean
158
Development of a monoclonal antibody-based competitive enzyme linked-immunosorbent assay (c-ELISA) for quantification of silver carp parvalbumin
159
Development of a monoclonal antibody-based enzyme-linked immunosorbent assay for detection of the furaltadone metabolite, AMOZ, in fortified shrimp samples
160
Development of a monoclonal antibody-based enzyme-linked immunosorbent assay for the analysis of the new fungicide 2-allylphenol in strawberry fruits
161
Development of a monoclonal antibody-based indirect competitive immunosorbent assay for 4(5)-Methylimidazole detection in caramels
162
Development of a monoclonal antibody-based sandwich-type enzyme-linked immunosorbent assay (ELISA) for detection of abrin in food samples
163
Development of a monoclonal blocking ELISA for the detection of antibody to Mycoplasma bovis in dairy cattle and comparison to detection by PCR
164
Development of a monoclonal blocking ELISA for the detection of antibody to Mycoplasma bovis in dairy cattle and comparison to detection by PCR
165
Development of a Monocyte Activation Test for Evaluating Recombinant Hepatitis B Vaccine: A Novel Approach for Pyrogen Assessment
166
Development of a monocyte/macrophage-like cell line, RTS11, from rainbow trout spleen
167
Development of a monolithic silica extraction tip for the analysis of proteins
168
Development of a Monte Carlo based aggregate model for residential electric water heater loads
169
Development of a More Effective Mosquito Trapping Box for Vector Control
170
Development of a more efficient emulsion liquid membrane system with a dilute polymer solution for extraction of penicillin G
171
Development of a more realistic upper bound solution for the three-dimensional problems in the forward extrusion process
172
Development of a more realistic upper bound solution for the three-dimensional problems in the forward extrusion process
173
Development of a morphological texture in relation with the crystallographic texture during sintering of strontium hexaferrites
174
Development of a movable synchrotron-radiation mask for the Photon Factory Advanced Ring (PF-AR)
175
Development of a movable synchrotron-radiation mask for the Photon Factory Advanced Ring (PF-AR)
176
DEVELOPMENT OF A MOWER FOR GRASS HARVESTING
177
Development of a MSW classification system for the evaluation of mechanical properties
178
Development of a multi-agent-based distributed simulation platform for semiconductor manufacturing
179
Development of a multianalyte method based on micro-matrix-solid-phase dispersion for the analysis of fragrance allergens and preservatives in personal care products
180
Development of a multicenter peripheral arterial interventional database: The PVD-QI2
181
Development of a multi-channel exploratory battery for psychophysiological assessment: the Stress Profile
182
Development of a multichannel Fourier-transform spectrometer to measure weak chemiluminescence: Application to the emission of singlet-oxygen dimol in the decomposition of hydrogen peroxide with gallic acid and K3[Fe(CN)6]
183
Development of a multichannel integrated interferometer immunosensor
184
Development of a Multichannel Microfluidic Analysis System Employing Affinity Capillary Electrophoresis for Immunoassay
185
Development of a multichannel monolith large-scale enzymatic membrane and application in an immobilized enzymatic membrane reactor
186
Development of a multi-channel waveform sampling ASIC for animal PET with DOI information
187
Development of a multi-channel waveform sampling ASIC for animal PET with DOI information
188
Development of a multi-class method for the quantification of veterinary drug residues in feedingstuffs by liquid chromatography-tandem mass spectrometry
189
Development of a multi-classification neural network model to determine the microbial growth/no growth interface
190
Development of a multi-component aqueous NiO, CuO, and Co3O4 suspension for use in suspension plasma spraying of SOFC anode layers
191
Development of a multi-component chemically reactive detection conjugate for the determination of Hg(II) in water samples Original Research Article
192
Development of a multi-component chemically reactive detection conjugate for the determination of Hg(II) in water samples Original Research Article
193
Development of a multi-component fiber-reinforced composite implant for load-sharing conditions
194
DEVELOPMENT OF A MULTI-CRITERIA AND MULTI-PARAMETRIC OPTIMIZATION TOOL FOR THE CUTTING CONDITIONS OF TURNING PROCESS
195
Development of a multicriteria tool for optimizing the renovation of buildings
196
Development of a Multidimensional HighPerformance Liquid Chromatography (HPLC) Separation for Bayer Humic Substances
197
Development of a multidimensional measure of fibromyalgia symptomatology: The comprehensive rating scale for fibromyalgia symptomatology
198
Development of a multidimensional measure of tobacco dependence in adolescence
199
Development of a multi-dimensional thermal-hydraulic system code, MARS 1.3.1
200
Development of a multi-electrode extrapolation chamber as a prototype of a primary standard for the realization of the unit of the absorbed dose to water for beta brachytherapy sources
201
Development of a multi-electrode extrapolation chamber as a prototype of a primary standard for the realization of the unit of the absorbed dose to water for beta brachytherapy sources
202
Development of a Multi-Epitope Recombinant Protein for the Diagnosis of Human Visceral Leishmaniasis
203
Development of a multi-factor model for predicting the effects of ambient ozone on the biomass of white clover
204
Development of a multi-fibre unit cell for use in modelling of fatigue of unidirectional composites
205
Development of a multi-Fourier-transform interferometer: fundamentals
206
Development of a multi-frequency laser for use in MALDI-TOFMS
207
Development of a multifunction module for the neutron electric dipole moment experiment at PSI
208
Development of a multifunction module for the neutron electric dipole moment experiment at PSI
209
Development of a multi-function software decision support tool for the promotion of the safe reuse of treated urban wastewater Original Research Article
210
Development of a multifunctional membrane for chromatic warning and enhanced adsorptive removal of heavy metal ions: Application to cadmium
211
Development of a multifunctional particle spectrometer for space radiation imaging
212
Development of a multifunctional particle spectrometer for space radiation imaging
213
Development of a Multi-GeV spectrometer for laser–plasma experiment at FLAME
214
Development of a Multi-GeV spectrometer for laser–plasma experiment at FLAME
215
Development of a multi-grid-type microstrip gas chamber for synchrotron radiation applications and spallation neutron sources
216
Development of a multi-grid-type microstrip gas chamber for synchrotron radiation applications and spallation neutron sources
217
Development of a multilayer anode for solid oxide fuel cells
218
Development of a multi-layer diffusion couple to study fission product transport in β-SiC
219
Development of a multi-layered micro-reactor coated with Pt–Co/Al2O3 catalyst for preferential oxidation of CO
220
Development of a multilocus variable number of tandem repeat typing method for Oenococcus oeni Original Research Article
221
Development of a multilocus variable-number of tandem repeat typing method for Listeria monocytogenes serotype 4b strains
222
Development of a multi-mechanistic, dual-porosity, dual-permeability, numerical flow model for coalbed methane reservoirs
223
Development of a multimetric index based on benthic macroinvertebrates for downstream Jajrud River in Tehran province, Iran
224
Development of a multimetric index based on benthic macroinvertebrates for the assessment of natural wetlands in Southwest Ethiopia
225
Development of a multimetric index based on macroinvertebrates for drainage ditch networks in agricultural areas
226
Development of a multi-microphone calibrator
227
Development of a multi-nozzle drop-on-demand system for multi-material dispensing
228
Development of a Multi-nutrient Data Quality Evaluation System
229
Development of a Multi-nutrient Data Quality Evaluation System
230
Development of a multi-objective coagulation system for long-term fouling control in dead-end ultrafiltration
231
Development of a multi-objective optimization algorithm using surrogate models for coastal aquifer management
232
Development of a multiobjective optimization procedure for reducing edge delamination stresses in composite plates
233
Development of A Multi-objective Robust Probabilistic Programming Mathematical Model Using Improved ε - Constrained Method in Gas Distribution Network Projects Implementation
234
Development of a multiparametric analyser based on ISFET sensors applied to process control in the wine industry
235
Development of a multiparametric system based on solid-state microsensors for monitoring a nuclear waste repository
236
Development of a multi-pass facility for equal-channel angular pressing to high total strains
237
Development of a multi-pass facility for equal-channel angular pressing to high total strains
238
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables
239
Development of a multi-pixel photon sensor with single-photon sensitivity
240
Development of a multi-pixel photon sensor with single-photon sensitivity
241
Development of a Multiple Coil Magneto-Rheological Smart Damper to Improve the Seismic Resilience of Building Structures
242
Development of a multiple criteria based decision support system for environmental assessment of recycling measures in the iron and steel making industry
243
Development of a multiple layer vacuum insulation chip
244
Development of a multiple objective planning theory and system for sustainable air quality monitoring networks
245
Development of a multiple primer RAPD assay as a tool for phylogenetic analysis in Listeria spp. strains isolated from milkproduct associated epidemics, sporadic cases of listeriosis and dairy environments
246
Development of a Multiple-Class High-Resolution Gas Chromatographic Relative Retention Time Model for Halogenated Environmental Contaminants
247
Development of a multiple-item scale for measuring customer satisfaction in travel agencies services
248
Development of a multiplex and semi-nested PCR assay for detection of Yersinia enterocolitica and Aeromonas hydrophila in raw milk Original Research Article
249
Development of a multiplex assay for the detection of antibodies to Borrelia burgdorferi in horses and its validation using Bayesian and conventional statistical methods
250
Development of a multiplex assay for the detection of antibodies to Borrelia burgdorferi in horses and its validation using Bayesian and conventional statistical methods
251
Development of a multiplex MethyLight assay for the detection of multigene methylation in human colorectal cancer
252
Development of a multiplex PCR method for testing six GM soybean events
253
Development of a multiplex polymerase chain reaction assay for differentiation of field strain isolates and vaccine strains S19 and RB51 of Brucella in Iran
254
Development of a Multiplex Polymerase Chain Reaction for Differential Diagnosis of Canary Pox Virus
255
Development of a multiplex qPCR method for simultaneous quantification in dry-cured ham of an antifungal-peptide Penicillium chrysogenum strain used as protective culture and aflatoxin-producing moulds
256
Development of a multiplex real time PCR to detect thermophilic lactic acid bacteria in natural whey starters
257
Development of a multiplex real-time PCR assay for identification of members of the Anopheles gambiae species complex
258
Development of a multiplex real-time PCR method for pathogenic Vibrio parahaemolyticus detection (tdh+ and trh+)
259
Development of a multiplex real-time PCR method for simultaneous detection of Vibrio parahaemolyticus, Listeria monocytogenes and Salmonella spp. in raw shrimp
260
Development of a multiplex real-time PCR to quantify aflatoxin, ochratoxin A and patulin producing molds in foods
261
Development of a Multiplex RT-PCR Assay for Detection of the Causal Agents of Citrus Tristeza and Cachexia Diseases with Coamplification of Plant mRNA as an Internal Control
262
Development of a multiplex UPLC-MRM MS method for quantification of human membrane transport proteins OATP1B1, OATP1B3 and OATP2B1 in in vitro systems and tissues Original Research Article
263
Development of a multiplexed Luminex assay for simultaneous detection of enteric viruses in cattle
264
Development of a multiplexed PCR assay combined with propidium monoazide treatment for rapid and accurate detection and identification of three viable Salmonella enterica serovars
265
Development of a multi-preservative method based on solid-phase microextraction–gas chromatography–tandem mass spectrometry for cosmetic analysis
266
Development of a multipurpose fruit and vegetable processor for a manned mission to Mars Original Research Article
267
Development of a multipurpose tile body: Phase and microstructural development
268
Development of a multi-residue analytical method, based on liquid chromatography–tandem mass spectrometry, for the simultaneous determination of 46 micro-contaminants in aqueous samples
269
Development of a multi-residue analytical methodology based on liquid chromatography–tandem mass spectrometry (LC–MS/MS) for screening and trace level determination of pharmaceuticals in surface and wastewaters
270
Development of a multiresidue method for analysis of pesticides in sediments based on isotope dilution and liquid chromatography-electrospray–tandem mass spectrometry
271
Development of a multiresidue method for analyzing herbicide and fungicide residues in bovine milk based on solid-phase extraction and liquid chromatography–tandem mass spectrometry
272
Development of a multi-residue method for fast screening and confirmation of 20 prohibited veterinary drugs in feedstuffs by liquid chromatography tandem mass spectrometry
273
Development of a multiresidue method for the determination of endocrine disrupters in fish fillet using gas chromatography–triple quadrupole tandem mass spectrometry
274
Development of a multi-residue method for the determination of organic micropollutants in water, sediment and mussels using gas chromatography–tandem mass spectrometry
275
Development of a multi-residue method for the determination of pesticides in cereals and dry animal feed using gas chromatography–tandem quadrupole mass spectrometry: II. Improvement and extension to new analytes
276
Development of a multi-residue method using acetonitrile-based extraction followed by liquid chromatography–tandem mass spectrometry for the analysis of steroids and veterinary and human drugs at trace levels in soil
277
Development of a multi-residue screening method for the determination of pesticides in cereals and dry animal feed using gas chromatography–triple quadrupole tandem mass spectrometry
278
Development of a multi-resolution framework for NUBS
279
Development of a multi-scale finite element model of the osteoporotic lumbar vertebral body for the investigation of apparent level vertebra mechanics and micro-level trabecular mechanics
280
Development of a multi-spectral vision system for the detection of defects on apples Original Research Article
281
Development of a multi-stage cloud water collector Part 1: Design and field performance evaluation
282
Development of a multi-stage cloud water collector Part 2: Numerical and experimental calibration
283
Development of a multistaged foam fractionation column
284
Development of a multitechnology field-programmable gate array suitable for photonic information processing
285
Development of a multi-temporal Kalman filter approach to geostationary active fire detection & fire radiative power (FRP) estimation
286
Development of a multi-tiered approach to the in vitro prescreening of clay-based enterosorbents
287
Development of a multi-tiered business model for value chain analysis for mobile nutrition counseling online system
288
Development of a multivariate regression model for overall satisfaction in public buildings based on field studies in Beijing and Shanghai
289
Development of a multi-vendor software to size and select TEC
290
Development of a mutant of Trichoderma citrinoviride for enhanced production of cellulases
291
Development of a myricetin/hydroxypropyl-β-cyclodextrin inclusion complex: Preparation, characterization, and evaluation
292
Development of a Nanocluster-Based Platform for Determination of Sofosbuvir
293
Development of a nano-electrospray MSn method for the analysis of serotonin and related compounds in urine using a LTQ-orbitrap mass spectrometer
294
Development of a Nano-ELISA system for the rapid and sensitive detection of H9N2 avian influenza
295
Development of a nano-liquid chromatography on chip tandem mass spectrometry method for high-sensitivity hepcidin quantitation
296
Development of a nano–micro carrier system for sustained pulmonary delivery of clarithromycin
297
Development of a nanoprecipitation method for the entrapment of a very water soluble drug into Eudragit RL nanoparticles
298
Development of a nanosecond time-resolved Brewster angle microscope to observe phase change at an interface
299
Development of a nanostructure microstructure in the Al–Ni system using the electrospark deposition process
300
Development of a nanostructured lipid carrier formulation for increasing photo-stability and water solubility of Phenylethyl Resorcinol
301
Development of a narrow size-distribution aerosol generator
302
Development of a NASICON-based amperometric carbon dioxide sensor
303
Development of a National Consensus Minimum Data Set for the Diagnosis and Treatment of Oral Cancer: Towards Precision Management
304
Development of a National Guide for Designing the Structure of Makeshift Hospital: With Focus on Pandemics
305
Development of a National Mega Research Project on the Integrated Watershed Management for Iran
306
Development of a national methane emission inventory for domestic livestock in Saudi Arabia
307
Development of a natural gas reaction mechanism for engine simulations based on rapid compression machine experiments using a multi-objective optimisation strategy
308
Development of a Natural Preservative System in Fluticasone Propionate Nasal Spray Formulation Using Eucalyptus globulus Essential Oil
309
Development of a navigation and control system for an autonomous outdoor vehicle in a steel plant
310
Development of a Nb-free TiAl-based intermetallics with a low-temperature superplasticity
311
Development of a needle-type biosensor for intravascular glucose monitoring
312
Development of a Need-Oriented Steam Turbine Cycle Simulation Toolbox
313
Development of a negligible depletion-solid phase microextraction method to determine the free concentration of chlorpromazine in aqueous samples containing albumin
314
Development of a nested-PCR assay for the detection of cryptosporidium parvum in finished water
315
Development of a network-based power quality diagnosis system
316
Development of a neural fuzzy system for advanced prediction of dew point pressure in gas condensate reservoirs
317
Development of a neural network model for a cold rolling process
318
Development of a neural network model to update forest distribution data for managed alpine stands
319
Development of a neural network model to update forest distribution data for managed alpine stands
320
Development of a neural network-based fault diagnostic system for solar thermal applications
321
Development of a Neuro-Fuzzy approach for treating multimodal distributions and spurious clusters
322
Development of a neurotoxic equivalence scheme of relative potency for assessing the risk of PCB mixtures
323
Development of a neutron absorption tracer technique for evaluation of fluid dynamics in coal liquefaction reactors
324
Development of a neutron detector with a GEM
325
Development of a neutron detector with a GEM
326
Development of a Neutron Radiography System based on a 10 MeV Electron Linac
327
Development of a neutron time-of-flight source at the ELBE accelerator
328
Development of a neutron time-of-flight source at the ELBE accelerator
329
Development of a neutron tomography system using a low flux reactor
330
Development of a neutron tomography system using a low flux reactor
331
Development of a neutron-imaging detector based on pulse–height correlation between two superconducting tunnel junctions on a Li2B4O7 crystal
332
Development of a neutron-imaging detector based on pulse–height correlation between two superconducting tunnel junctions on a Li2B4O7 crystal
333
Development of a new “flow-through” sample cup for the vertical micro-furnace pyrolyzer to reduce undesirable secondary reactions and band broadening of resulting pyrolyzates
334
Development of a new abrasion tester based on planetary motion
335
Development of a new academic digital library: a study of usage data of a core medical electronic journal collection
336
Development of a new aerosol phase extraction method for metal determination through inductively coupled plasma atomic emission spectrometry
337
Development of a new airlift-driven raceway reactor for algal cultivation
338
Development of a New Alpha Function for the Peng–Robinson Equation of State: Comparative Study of Alpha Function Models for Pure Gases (Natural Gas Components) and Water-Gas Systems
339
Development of a new analytical approach based on cellulose membrane and chelator for differentiation of labile and inert metal species in aquatic systems Original Research Article
340
Development of a new analytical method for online simultaneous qualitative determination of aluminium (free aluminium ion, aluminium-fluoride complexes) by HPLC-FAAS
341
Development of a new analytical method for the determination of fumonisins B1 and B2 in food products based on high performance liquid chromatography and fluorimetric detection with post-column derivatization
342
Development of a new analytical method for the determination of sulfites in fresh meats and shrimps by ion-exchange chromatography with conductivity detection Original Research Article
343
Development of a new apparatus for contamination measurement of overhead transmission line insulators
344
Development of a new apparatus for ultrasonic vibration-assisted glass hot embossing process
345
Development of a new approach for deterministic supply chain network design
346
DEVELOPMENT OF A NEW APPROACH FOR HIGH-QUALITY QUADRUPLING FREQUENCY OPTICAL MILLIMETER-WAVE SIGNAL GENERATION WITHOUT OPTICAL FILTER
347
Development of a new approach for microbial decontamination of water using modified Fentonʹs reaction
348
Development of a New Approach to Earthquake Prediction: Load/Unload Response Ratio (LURR) Theory
349
Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel
350
Development of a new assessment system for the applicability of digital projects in the oil and gas sector
351
Development of a new atropine sulfate bulk acoustic wave sensor based on a molecularly imprinted electrosynthesized copolymer of aniline with o-phenylenediamine Original Research Article
352
Development of a New Backward Directional Coupler Based on Perforated Substrates
353
Development of a new Bi–Di correlation for solids drying
354
Development of a new biochemical assay for assessing toxicity in invertebrate and fish sperm
355
Development of a new biodiesel that integrates glycerol, by using CaO as heterogeneous catalyst, in the partial methanolysis of sunflower oil
356
Development of a new bioethanol feedstock – Anaerobically digested fiber from confined dairy operations using different digestion configurations
357
Development of a new biomimetic sensor based on an FeIIIFeII complex for the determination of phenolic compounds
358
Development of a new biomonitoring method to detect the abnormal activity of Daphnia magna using automated Grid Counter device
359
Development of a new biosensor based on functionalized SBA-15 modified screen-printed graphite electrode as a nano-reactor for Gquadruplex recognition
360
Development of a new Biot number and lag factor correlation for drying applications
361
Development of a new biotic index to assess freshwater pollution
362
Development of a new bulk optode membrane for the determination of mercury(II) Original Research Article
363
Development of a new burr-free hydro-mechanical punching
364
Development of a new calcium phosphate cement that contains sodium calcium phosphate
365
Development of a new chemically modified carbon paste electrode for selective determination of urinary and serum oxalate concentration
366
Development of a new chromium reducing antioxidant capacity (CHROMAC) assay for plants and fruits
367
Development of a new class of (1S,3R,4R)-2-azabicyclo[2.2.1]heptane-oxazoline ligands and their application in asymmetric transfer hydrogenation
368
Development of a new class of C1-symmetric bisphosphine ligands for rhodium-catalyzed asymmetric hydrogenation
369
Development of a new class of photochromic peptides by using diarylethene-based non-natural amino acids
370
Development of a new class of potential antiatherosclerosis agents: NO-donor antioxidants
371
Development of a new clay supported polyethylenimine composite for CO2 capture
372
Development of a new cleaner production process for producing chromic oxide from chromite ore
373
Development of a new clean-up tandem assay column for the detection of ochratoxin A in roasted coffee Original Research Article
374
Development of a new coal washability index
375
Development of a new column switching method for simultaneous speciation of selenometabolites and selenoproteins in human serum
376
Development of a new combinatorial mask for addressable ternary phase diagramming: application to rare earth doped phosphors
377
Development of a new compositional model with multi-component sorption isotherm and slip flow in tight gas reservoirs
378
Development of a new compound method to extract the five parameters of PV modules
379
Development of a new concept solar-biomass cogeneration system
380
Development of a new consumable-free thermal modulator for comprehensive two-dimensional gas chromatography
381
Development of A New Correlation for Estimating Pressure Gradient of Oil- Water Two Phase Flow in A Horizontal Pipe
382
Development of a new Cr(VI)-biosorbent from agricultural biowaste
383
Development of a new creep testing equipment to obtain long-term deformation parameters of salt
384
Development of a new cyano-bonded column for high-performance liquid chromatography
385
Development of a new damper to reduce resonant vibrations in lightweight steel joist floors
386
Development of a new decay heat removal system for a high temperature gas-cooled reactor
387
Development of a new design of hip protectors using finite element analysis and mechanical tests
388
Development of a new design of valve-regulated lead–acid battery (new Model YT4B) for motorcycle use
389
Development of a new detection system for monitoring high-level tritiated water
390
Development of a new detector and DAQ systems for iBIX
391
Development of a new detector and DAQ systems for iBIX
392
Development of a new device to control oblique waves in transitional boundary layers
393
Development of a new device to perform torsional ultrasonic fatigue testing
394
Development of a new diagnostic method for galactosemia by high-performance anion-exchange chromatography with pulsed amperometric detection
395
Development of a new diagnostic protocol using a neuro-dynamical tool
396
Development of a new discharge control system for JT-60 with a unix workstation and a VME-bus system
397
Development of a new dispersive liquid–liquid microextraction method in a narrow-bore tube for preconcentration of triazole pesticides from aqueous samples Original Research Article
398
Development of a new DNA chip microarray by hydrophobic interaction
399
Development of a New DNA Chip Microarray Using RFSA Method
400
Development of a new DNA extraction protocol for PFGE typing of Mycobacterium tuberculosis complex
401
Development of a new durability index for compacted shale
402
Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
403
Development of a new dynamometer for measuring grip strength applied on a cylindrical handle
404
Development of a new ecological concrete with CO2 emissions below zero
405
Development of a new electrochemical catalyst with an electrochemically assisted regeneration ability for H2 production at low temperatures
406
Development of a new electrochemical hydride generator with tungsten wire cathode for the determination of As and Sb by atomic fluorescence spectrometry
407
Development of a new electrochemical sensor based on modified carbon paste electrode for simultaneous determination of norepinephrine and acetaminophen in real samples
408
Development of A New Electrochemical Sensor based on Zr-MOF/MIP for Sensitive Diclofenac Determination
409
Development of a new electrodeposition method for Pu-determination in environmental samples
410
Development of a new electronic neutron imaging system
411
Development of a new electronic neutron imaging system
412
Development of a new electroplating solution for electrodeposition of Au–Co alloys
413
Development of a new empirical non-cubic equation of state
414
Development of a New Epitope Immunogenic Structure Based on the Coronavirus Membrane Glycoprotein M Using Immunoinformatics Tools
415
Development of a new EPR spin trap, DOD-8C (N-[4-dodecyloxy-2-(7′-carboxyhept-1′-yloxy)benzylidene]-N-tert-butylamine N-oxide), for the trapping of lipid radicals at a predetermined depth within biological membranes
416
Development of a new equation and validation of earlier resting energy expenditure predicting equations in adults living in Tehran
417
Development of a new equation of state for mixed salt and mixed solvent systems, and application to vapour–liquid and solid (hydrate)–vapour–liquid equilibrium calculations
418
Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using drop Weight Test
419
Development of a new external heat exchanger for a circulating fluidized bed boiler
420
Development of a new fast shower maximum detector based on microchannel plates photomultipliers (MCP-PMT) as an active element
421
Development of a new fast shower maximum detector based on microchannel plates photomultipliers (MCP-PMT) as an active element
422
Development of a new FIA-potentiometric sensor for dopamine based on EVA-copper(II) ions
423
Development of a new finite element for composite delamination analysis
424
Development of a new finite element for plate and shell analysis by application of generalized approach to patch test
425
Development of a new first level trigger for the surface array in the Pierre Auger Observatory based on the CycloneTM Altera FPGA
426
Development of a new first level trigger for the surface array in the Pierre Auger Observatory based on the CycloneTM Altera FPGA
427
Development of a new flat stationary evacuated CPC-collector for process heat applications
428
Development of a new fluorescent probe for transition metal cations based upon fluorescence resonance energy transfer
429
Development of a new fluorescent probe for transition metal cations based upon fluorescence resonance energy transfer Original Research Article
430
Development of a new fluorescent sensor based on a triazolo-thiadiazin derivative immobilized in polyvinyl chloride membrane for sensitive detection of lead(II) ions
431
Development of a New Fluoride Colorimetric Sensor Based on Anti-aggregation of Modified Silver Nanoparticles
432
Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tertbutyl-1,3-benzexazole) for nickel(II) ions
433
Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions Original Research Article
434
Development of a new form for the alpha function of the Redlich–Kwong cubic equation of state
435
Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen
436
Development of a new frame finite element for crash analysis, using a mixed variational principle and rotations as independent variables
437
Development of a New Framework for Health Assessment in Patients with by using miRNA-197 in Adults Coronary Artery Disease
438
Development of a new free wake model considering a blade–vane interaction for a low noise axial fan planform optimization
439
Development of a new frequency weighting filter for the assessment of grinder exposure to wrist-transmitted vibration
440
Development of a new fusion power monitor based on activation of flowing water
441
Development of a new gas absorption chiller heater—advanced utilization of waste heat from gas-driven co-generation systems for air-conditioning
442
Development of a new gas chromatography–mass spectrometry (GC–MS) methodology for the evaluation of 5α-reductase activity
443
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes Application to carbon dioxide/methane and carbon dioxide/helium mixtures
444
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes. Application to oxygen/nitrogen mixture
445
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes: Application to carbon dioxide/methane and carbon dioxide/helium mixtures Original Research Article
446
Development of a New Gas-Inducing Turbine Family: The Partially Shrouded Turbine
447
Development of a new generalized correlation to characterize physical properties of pure components and petroleum fractions
448
Development of a new generation of amorphous hard coatings based on the Si–B–C–N–O system for applications in extreme conditions
449
Development of a new generation of filament wound composite pressure cylinders
450
Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
451
Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
452
Development of a new generation of optical slope measuring profiler
453
Development of a new generation of optical slope measuring profiler
454
Development of a new graded-porosity FeAl alloy by elemental reactive synthesis Original Research Article
455
Development of a new high performance liquid chromatography method for measurement of coenzyme Q10 in healthy blood plasma
456
Development of a new high performance low pressure chromatographic system using a multisyringe burette coupled to a chromatographic monolithic column
457
Development of a new high porosity ceramic membrane for the treatment of bilge water Original Research Article
458
Development of a new high-performance liquid chromatography method with diode array and electrospray ionization-mass spectrometry detection for the metabolite fingerprinting of bioactive compounds in Humulus lupulus L.
459
Development of a new hollow-fiber module for large ultrafiltration plants Original Research Article
460
Development of a new homogenous photo-Fenton process using Fe(III)-EDDS complexes
461
Development of a new hybrid plasma torch for materials processing
462
Development of a new hybrid technique for estimating of relative uplift force in gravity dams based on whale optimization algorithm
463
Development of A new Hydraulic Relationship for Submerged Slide Gates
464
Development of a new hydraulic servo cylinder with mechanical feedback
465
Development of a new hydrocarbon index for oil-in-water
466
Development of a new hydrodemetallization catalyst for deep desulfurization of atmospheric residue and the effect of reaction temperature on catalyst deactivation
467
Development of a New Immunochromatographic Assay Using Gold Nanoparticles for Screening of IgA Deficiency
468
Development of a new immunotoxin from part of the scorpion venom for the treatment of breast cancer
469
Development of a new in vitro method to evaluate the photoprotective sunscreen activity of plant extracts against high UV-B radiation
470
Development of a new in vitro model of elastic fiber assembly in human pigmented epithelial cells
471
Development of a new index for the assessment of hydromorphological alterations of the Mediterranean rocky shore
472
Development of a new index to assess river regime impacts after dam construction
473
Development of a New Indirect ELISA Method for Detection of Anti-Tuberculosis Antibodies in Human Serum
474
Development of a new inexpensive green thermoplastic composite and evaluation of its physico-mechanical and wear properties
475
Development of a new integrated method for generation of IDF curves based on three scenarios of climatic changes
476
Development of a new integrated surrogate safety measure for applying in intelligent vehicle systems
477
Development of a New Interferometric Measurement System for Determining the Main Characteristics of Gauge Blocks
478
Development of a new ion-selective field-effect transistor sensor for anionic surfactants: Application to potentiometric titrations Original Research Article
479
Development of a new jet mill for very fine mineral grinding
480
Development of a new laboratory evaporation measurement device as decision support for evaporation-optimized building
481
Development of a new lapping method for high precision ball screw (1st report)-feasibility study of a prototyped lapping tool for automatic lapping process
482
Development of a new lapping method for high precision ball screw (2nd report): Design and experimental study of an automatic lapping machine with in-process torque monitoring system
483
Development of a new lean burning combustor with fuel film evaporation for a micro gas turbine
484
Development of a new lean lubrication system for near dry machining process
485
Development of a new linker for the solid-phase synthesis of N-hydroxylated and N-methylated secondary amines
486
Development of a new LOPAP instrument for the detection of O3 in the atmosphere
487
Development of a new low-cost procedure for wind farm maintenance with a view to decrease soil pollution
488
Development of a new low-temperature methanol synthesis process
489
Development of a new magnesium alloy ZW21
490
Development of a new management strategy for the control of root-knot nematodes (Meloidogyne spp) in organic vegetable production
491
Development of a new masters program for occupational physicians in Flanders
492
Development of a new mathematical model for inactivation of Escherichia coli O157:H7 and Staphylococcus aureus by high hydrostatic pressure in carrot juice and peptone water Original Research Article
493
Development of a new mechanism to change velocity in a helical swimmer robot at low Reynolds number
494
Development of a new meshless — point weighted least-squares (PWLS) method for computational mechanics
495
Development of a New Method Based on Chiral Ligand-Exchange Chromatography for the Enantioseparation of Propranolol
496
Development of a New Method for Analysis of Oil Mists
497
Development of a new method for determination of aluminum (Al) in Jordanian foods and drinks: Solid phase extraction and adsorption of Al3+-d-mannitol on carbon nanotubes
498
Development of a new method for determination of aluminum (Al) in Jordanian foods and drinks: Solid phase extraction and adsorption of Al3+-d-mannitol on carbon nanotubes
499
Development of a new method for determination of exopolysaccharide quantity in fermented milk products and its application in technology of kefir production
500
Development of a new method for determination of total haem protein in fish muscle
501
Development of a new method for evaluating cyclone efficiency
502
Development of a new method for evaluating vortex length in reversed flow cyclone separators
503
Development of a new method for fast measurement of water sorption isotherms in the high humidity range Validation on gelatine gel Original Research Article
504
Development of a new method for sperm RNA purification in the chicken
505
Development of a new method for sulfide determination by vapor generator–inductively coupled plasma–mass spectrometry
506
Development of a new method for sulfide determination by vapor generator–inductively coupled plasma–mass spectrometry
507
Development of a new method for the determination of nitrosamines by micellar electrokinetic capillary chromatography
508
Development of a new method for the enantiomer specific determination of HBCD using an ion trap mass spectrometer Original Research Article
509
Development of a new method for the noninvasive measurement of deep body temperature without a heater
510
Development of a New Method in Exergy Analysis of a CSP Plant
511
Development of a New Method of Sensitivity Matrix for Image Reconstruction in Electric Charge Tomography System Using Finite Element Method
512
Development of a new method to estimate the regional and local contributions to black carbon
513
development of a new methodology for lincomycin.hci (lino.hci) determination using phosphomolybdic acid (pma) as a reagent and isnag-fluorimeter instrument via cfia
514
Development of a new methodology to integrate ELV treatment limits into requirements for metal automotive part design
515
Development of a new methodology to obtain the characteristic pump curves that minimize the total cost at pumping stations
516
Development of a new micro reaction sampler for pyrolysis-GC/MS system facilitating on-line analytical chemolysis of intractable condensation polymers
517
Development of a new micro reaction sampler for pyrolysis-GC/MS system facilitating on-line analytical chemolysis of intractable condensation polymers
518
Development of a new microextraction method based on a dynamic single drop in a narrow-bore tube: Application in extraction and preconcentration of some organic pollutants in well water and grape juice samples
519
Development of a new microextraction method based on elevated temperature dispersive liquid–liquid microextraction for determination of triazole pesticides residues in honey by gas chromatography-nitrogen phosphorus detection
520
Development of a new micromixer based on split/recombination for mass production and its application to soap free emulsifier
521
Development of a New Microreactor Based on Annular Microsegments for Fine Particle Production
522
Development of a new minimum avoidance system for a behavior-based mobile robot
523
Development of a New Mining Intrinsically Safe DC Electrical Prospecting Apparatus
524
Development of a new model for biodiesel viscosity prediction based on the principle of corresponding state
525
Development of a new model of actinic enteritis in rats using a cobalt-60 open source and a protection device as a collimator
526
Development of a New Model to Estimate the Technical Quality of Sugar Beet in the Semi – Arid Climate
527
Development of a new model to predict gas viscosity using artificial neural networks
528
Development of a new model to predict indoor daylighting: Integration in CODYRUN software and validation
529
Development of a new moisture transfer (Bi–Re) correlation for food drying applications
530
Development of a new molecular dynamics method for tribochemical reaction and its application to formation dynamics of MoS2 tribofilm
531
Development of a new monoclonal antibody based direct competitive enzyme-linked immunosorbent assay for detection of brevetoxins in food samples
532
Development of a new monoclonal antibody to ovine chimeric IgE and its detection of systemic and local IgE antibody responses to the intestinal nematode Trichostrongylus colubriformis
533
Development of a new monoclonal antibody to ovine chimeric IgE and its detection of systemic and local IgE antibody responses to the intestinal nematode Trichostrongylus colubriformis
534
Development of a new Monte Carlo simulation system on positron behavior in matter
535
Development of a new multi-grid-type microstrip gas chamber
536
Development of a new multi-grid-type microstrip gas chamber
537
Development of a new multiple sampling trawl with autonomous opening/closing net control system for sampling juvenile pelagic fish
538
Development of a new multi-residue laser diode thermal desorption atmospheric pressure chemical ionization tandem mass spectrometry method for the detection and quantification of pesticides and pharmaceuticals in wastewater samples Original Research Artic
539
Development of a new neuropsychological test battery
540
Development of a new neutron monitor using a boron-loaded organic liquid scintillation detector
541
Development of a new neutron monitor using a boron-loaded organic liquid scintillation detector
542
Development of a new niobium-based alloy for vascular stent applications
543
Development of a new non-destructive testing technique for quantitative evaluations of delamination defects in concrete structures based on phase delay measurement using lock-in thermography
544
Development of a new nonlinear numerical material model for woven composite materials accounting for permanent deformation and damage
545
Development of a new oat-based probiotic drink
546
Development of a new off-line test procedure for low voltage rotating machines fed by adjustable speed drives (ASD)
547
Development of a new on-line mass spectrometer to study the reactivity of soluble organic compounds in the aqueous phase under tropospheric conditions: Application to OH-oxidation of N-methylpyrrolidone
548
Development of a new on-line synchronous generator simulator using personal computer for excitation system studies
549
Development of a new on-line system for the sequential speciation and determination of chromium species in various samples using a combination of chelating and ion exchange resins
550
Development of a new organic composite coating for enhancing corrosion resistance of 55% Al–Zn alloy coated steel sheet
551
Development of a new oxidation stability test method for lubricating oils using high-pressure differential scanning calorimetry
552
Development of a new peel-stopper for sandwich structures
553
Development of a new photo-detector readout technique for PET and CT imaging
554
Development of a new photo-detector readout technique for PET and CT imaging
555
Development of a new photoinitiation system for dental light-cure composite resins
556
Development of a new photomultiplier tube with high sensitivity for a wavelength-shifter fiber readout
557
Development of a new photomultiplier tube with high sensitivity for a wavelength-shifter fiber readout
558
Development of a new photopolymerizable membrane for monochloroacetate sensitive potentiometric sensors Original Research Article
559
Development of a new pH-swing CO2 mineralization process with a recyclable reaction solution
560
Development of a new pilot scale production of high grade oil palm plywood: Effect of pressing pressure
561
Development of a new plasticizer for poly(ethylene oxide)-based polymer electrolyte and the investigation of their ion-pair dissociation effect
562
Development of a new polymer membrane — PVB/PVDF blended membrane
563
Development of a new porous metal support of metallic dense membrane for hydrogen separation
564
Development of a new precision internal machining process using an alternating magnetic field
565
Development of a new predictive modelling technique to find with confidence equivalence zone and design space of chromatographic analytical methods
566
Development of a new procedure for precise determination of viral aerosol lethal dose (ALD50) for birds
567
Development of a new procedure for the experimental determination of the Forming Limit Curves
568
Development of a new process in high functioning ceramic core without shape deformation
569
Development of a new protein labeling strategy, oxidation labeling. part 1: Preliminary evaluation and synthesis of tautomycin containing a metal coordinating unit
570
Development of a new protocol for the isolation and quantification of Arcobacter species from poultry products
571
Development of a new proximate analysis based correlation to predict calorific value of coal
572
Development of a New Psychometric Assessment Tool for Predicting Hepatitis B Virus Infection in Pregnant Women
573
Development of a new quadratic shell element considering the normal stress in the thickness direction for simulating sheet metal forming
574
Development of a new quadrilateral thin plate element using area coordinates Original Research Article
575
Development of a new qualification method for photocatalytically active surfaces based on a solid state luminescent dye
576
Development of a new quality fair access best value performance indicator (BVPI) for recycling services
577
Development of a new quantification method for a fire PSA
578
Development of a new quantification method for a fire PSA
579
Development of a new quantification method using partial volume effect correction for individual energy peaks in 111In-pentetreotide SPECT/CT
580
Development of a new QuEChERS method based on dry ice for the determination of 168 pesticides in paprika using tandem mass spectrometry
581
Development of a new radiation detector utilizing carbon nanotube as anode
582
Development of a new radiation detector utilizing CNTs as anodes
583
Development of a new radioligand for cholecystokinin receptor subtype 2 scintigraphy: From molecular modeling to in vivo evaluation Original Research Article
584
Development of a new rapid characterization method of hobʹs wear resistance in gear manufacturing—Application to the evaluation of various cutting edge preparations in high speed dry gear hobbing
585
Development of a new rapid method to measure erosion rates in laboratory and pilot plant cyclones
586
Development of a new reflectance technique to investigate the mechanism of emulsification Original Research Article
587
Development of a new rotary demister
588
Development of a New RP-UPLC Method for the Determination of Rabeprazole Sodium in Pharmaceutical Formulation and Application in Dissolution Studies
589
Development of a new sample pretreatment procedure based on pressurized liquid extraction for the determination of fluoroquinolone residues in table eggs
590
Development of a new sample pre-treatment procedure based on pressurized liquid extraction for the determination of metals in edible seaweed Original Research Article
591
Development of a new self-awareness of falls risk measure (SAFRM)
592
Development of a new semi analytical model for prediction of bubble point pressure of crude oils
593
Development of a New Sensitive Electrochemical Sensor for Dapsone Detection using a Cobalt Metal-Organic Framework/Molecularly Imprinted Polymer Nanostructures
594
Development of a new sequential block finding strategy for detection of conserved sequences in riboswitches
595
Development of a new sequential injection in-line cloud point extraction system for flame atomic absorption spectrometric determination of manganese in food samples
596
Development of a new series of polyamine-type polymeric surfactants used for emulsion liquid membranes
597
Development of a new simulation model of spin coating process and its application to optimize the 450 mm wafer coating process
598
Development of a new skeletal mechanism for n-decane oxidation under engine-relevant conditions based on a decoupling methodology
599
Development of a new software for adaptive crack growth simulations in 3D structures
600
Development of a New Software to Transmit the Audio Signals without Server-Based
601
Development of a new solar thermal engine system for circulating water for aeration
602
Development of a new spray/wall interaction model
603
Development of a new structural prepreg: characterisation of handling, drape and tack properties
604
Development of a new styrene copolymer membrane for recycling of polyester fibre dyeing effluent
605
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics
606
Development of a New SWOT-MCDM Model to Create Marketing and Financial Strategies in Conditions of Uncertainty (Case Study of Iralco Company)
607
Development of a new synthesized adsorbent for refrigeration and air conditioning applications
608
Development of a new system for improving blastability by using the Fuzzy Delphi AHP method
609
Development of a new technique to predict reverse osmosis fouling
610
DEVELOPMENT OF A NEW TECHNOLOGY FOR ELECTRO/IMPULSE HARDENING OF TOOL STEELS
611
Development of a new technology for the production of microcapsules based in atomization processes
612
Development of a new technology of deformable mirror for ultra intense laser applications
613
Development of a new technology of deformable mirror for ultra intense laser applications
614
Development of a new technology product evaluation model for assessing commercialization opportunities using Delphi method and fuzzy AHP approach
615
Development of a new temperature measuring system for gas–liquid flow in spraying field
616
Development of a new ternary photoluminescence enhancement system of Eu–N-(2-hydroxy-1-naphthaldehyde)-1,8-diaminonaphthalene–1,10-phenanthroline for trace determination of Eu3+
617
Development of a new test system to determine penetration of multi-walled carbon nanotubes through filtering facepiece respirators
618
Development of a new tissue-equivalent material applied to optimizing surgical accuracy
619
Development of a new tool for the selection of pervaporation membranes for the separation of fusel oils from ethanol/water mixtures
620
Development of a new total reflection X‐ray fluorescence instrument using polycapillary X‐ray lens
621
Development of a new traceable areal surface texture measuring instrument
622
Development of a new traceless aniline linker for combinatorial solid-phase parallel synthesis of rod-shaped liquid crystals with an azomethine linkage
623
Development of a new traceless aniline linker for solid-phase synthesis of azomethines. Application to parallel synthesis of a rod-shaped liquid crystalline library
624
Development of a New Truss Quadratic Quadrilateral Macro-Element
625
Development of a new two-dimensional position-sensitive detection based on resistive charge division and using CdTe detectors for a high-resolution semiconductor-based PET scanning
626
Development of a new two-dimensional position-sensitive detection based on resistive charge division and using CdTe detectors for a high-resolution semiconductor-based PET scanning
627
Development of a New Two-Phase Fluid Atomizer Nozzle in Pilot Scale for Fluid Catalytic Cracking Process
628
Development of a new type of electric off-road vehicle powered by microwaves transmitted through air
629
Development of a new type of imaging plate for neutron detection
630
Development of a new type of imaging plate for neutron detection
631
Development of a new type of SiGe thin strain relaxed buffer based on the incorporation of a carbon-containing layer
632
Development of a new type of thermogravimetric analyser with a mini-tapered fluidized bed. Effect of fluidization of particles on the stability of the system
633
Development of a new ultrafine grained dual phase steel and examination of the effect of grain size on tensile deformation behavior
634
Development of a new ultraporous polymer as support in organic synthesis
635
Development of a New Variable Remote Center Compliance (VRCC)With Modified Elastomer Shear Pad (ESP) for Robot Assembly
636
Development of a new variable repetitive group sampling plan based on EWMA yield index
637
Development of a new-type suspension spring for rally cars
638
Development of a nickel–polymer composite by using friendly environmental polymeric surfactant
639
Development of a niobium clad PEM fuel cell bipolar plate material
640
Development of a NMLFPE (non-monochromatic lightwave Fabry-Perot etalon) for smart structure sensor applications
641
Development of a NMLFPE (non-monochromatic lightwave Fabry-Perot etalon) for smart structure sensor applications
642
Development of a NO2 scrubber for accurate sampling of ambient levels of terpenes
643
Development of a nodal effective load model considering transmission system element unavailabilities
644
Development of a Noise Prediction Model Based on Advanced Fuzzy Approaches in Typical Industrial Workrooms
645
Development of a noise sources classification system based on new method for feature selection
646
Development of a non lethal sampling method to monitor immune response and disease progression in salmonid fish
647
Development of a non-adiabatic two-coil spin flipper for a polarised thermal neutron diffractometer with a 3He spin filter
648
Development of a non-adiabatic two-coil spin flipper for a polarised thermal neutron diffractometer with a 3He spin filter
649
Development of a non-chromatographic method for the speciation analysis of inorganic antimony in mushroom samples by hydride generation atomic fluorescence spectrometry
650
Development of a non-chromatographic method for the speciation analysis of inorganic antimony in mushroom samples by hydride generation atomic fluorescence spectrometry
651
Development of a non-commercial sugar-free barbecue sauce
652
Development of a non-competitive immunoassay for cortisol and its application to the analysis of saliva Original Research Article
653
Development of a non-competitive immunoassay for monitoring DDT, its metabolites and analogues in water samples
654
Development of a non-competitive immunoassay for monitoring DDT, its metabolites and analogues in water samples Original Research Article
655
Development of a non-denaturing 2D gel electrophoresis protocol for screening in vivo uranium-protein targets in Procambarus clarkii with laser ablation ICP MS followed by protein identification by HPLC–Orbitrap MS
656
Development of a non-derivatization high-performance liquid chromatography method with resonance Rayleigh scattering detection for the detection of sisomicin in rat serum
657
Development of a non-destructive neutron radiography technique to measure the three-dimensional soot deposition profiles in diesel engine exhaust systems
658
Development of a non-destructive salt and moisture measurement method in salmon (Salmo salar) fillets using impedance technology
659
Development of a non-destructive testing technique using ultrasonic wave for evaluation of irradiation embrittlement in nuclear materials
660
Development of a non-ideal plasma target for non-linear beam–plasma interaction experiments
661
Development of a non-ideal plasma target for non-linear beam–plasma interaction experiments
662
Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting: Effect of the process parameters
663
Development of a Non-Invasive Bio-Acoustics Measurement System for Assessing Articular Cartilage Knee Joint Problem
664
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method
665
Development of a non-labeled immunosensor for the herbicide trifluralin via optical waveguide lightmode spectroscopic detection Original Research Article
666
Development of a Non-linear Levels Model and its Application to Bora-driven Circulation on the Adriatic Shelf
667
Development of a nonlinear near-wall turbulence model for turbulent flow and heat transfer
668
Development of a non-linear triangular prism solid-shell element using ANS and EAS techniques
669
Development of a Non-Radial Network Model to Evaluate the Performance of a Multi-Stage Sustainable Supply Chain
670
Development of a Non-radioactive Dot-blot Hybridisation Assay for the Detection of Pelargonium Flower Break Virus and Pelargonium line Pattern Virus
671
Development of a non-radioactive endpoint in a modified local lymph node assay
672
Development of a non-reflecting boundary condition for multidimensional nonlinear duct acoustic computation
673
Development of a non-supervised and automatic method for detecting land cover changes in urban areas by using radar and optic data
674
Development of a non-triangular separation region for improving the performance of a three-zone simulated moving bed chromatography for binary separation with linear isotherms
675
Development of a non-uniform-current model for predicting transient thermal behavior of thermoelectric coolers
676
Development of a novel 2-stage entrained flow coal dry powder gasifier
677
Development of a novel 32P-postlabeling method for the analysis of 3′-azido-3′-deoxythymidine
678
Development of a novel 5-DOF controlled maglev local actuator for high-speed electrical discharge machining
679
Development of a novel 6351 Al–(Al4SiC4+SiC) hybrid composite with enhanced mechanical properties
680
Development of a novel albumin-binding prodrug that is cleaved by urokinase-type-plasminogen activator (uPA)
681
Development of a novel alkaline zinc–iron plating bath containing sorbitol and the chemical, physical and morphological characterization of the Zn–Fe films
682
Development of a novel aluminum-free glass ionomer cement based on magnesium/strontium-silicate glasses
683
Development of a novel amide-silica stationary phase for the reversed-phase HPLC separation of different classes of phytohormones
684
Development of a novel amperometric glucose biosensor based on copolymer of pyrrole-PAMAM dendrimers
685
Development of a novel analytical method for determination of chondroitin sulfate using an in-capillary enzyme reaction
686
Development of a Novel and Efficient HCDC Process for heterologous production of Ambystoma Mexicanum Epidermal Lipoxygenase (AmbLOXe) in E. coli
687
Development of a novel and specialized cultivation method for isolating Helicobacter pullorum from chicken meat
688
Development of a Novel Anti-Adhesive Vaccine Against Pseudomonas aeruginosa Targeting the C-terminal Disulfide Loop of the Pilin Protein
689
Development of a novel antimicrobial film based on chitosan with LAE (ethyl-Nα-dodecanoyl-l-arginate) and its application to fresh chicken
690
Development of a Novel Anti-Obesity Compound with Inhibiting Properties on the Lipid Accumulation in 3T3-L1 Adipocytes
691
Development of a novel approach for secondary modelling in predictive microbiology: incorporation of microbiological knowledge in black box polynomial modelling
692
Development of a novel approach to determine heating pattern using computer vision and chemical marker (M-2) yield Original Research Article
693
Development of a novel approach, the epigenome-based outlier approach, to identify tumor-suppressor genes silenced by aberrant DNA methylation
694
Development of a novel articulator that reproduced jaw movement with six-degree-of-freedom
695
Development of a Novel Basket Impeller Dualflow Tray Catalytic Distillation Reactor
696
Development of a novel binder system for manufacture of ceramic heart valve prostheses
697
Development of a novel binderless diamond grinding wheel for machining IC chips for failure analysis
698
Development of a novel bioassay for evaluating of the infectivity and between generation transmission effects of entomopathogenic fungi Beauvaria bassiana (Balsamo) Vuilleminon on population of Sawtoo
699
DEVELOPMENT OF A NOVEL BIOBEVERAGE – BIOFEVITA
700
Development of a novel biosensor based on a conducting polymer
701
Development of a novel candidate subunit vaccine against Grass carp reovirus Guangdong strain (GCRV-GD108)
702
Development of a novel cascading TPV and TE power generation system
703
Development of a novel catalytic burner for natural gas combustion for gas stove and cooking plate applications
704
Development of a novel catalytic distillation column
705
Development of a novel cathodic plasma/electrolytic deposition technique part 1: Production of titanium dioxide coatings
706
Development of a novel cathodic plasma/electrolytic deposition technique: Part 2: Physico-chemical analysis of the plasma discharge
707
Development of a novel chemical water shut-off method for fractured reservoirs: Laboratory development and verification through core flow experiments
708
Development of a novel chemiluminescent probe, 4-(5ʹ,6ʹ-Dimethoxybenzothiazolyl) phthalhydrazide
709
Development of a novel chromosome dissection chip for chromosomal analysis with nanometer size
710
Development of a novel chromosome dissection chip for chromosomal analysis with nanometer size
711
Development of a novel collagen–GAG nanofibrous scaffold via electrospinning
712
Development of a novel colorimetric indicator label for monitoring freshness of intermediate-moisture dessert spoilage
713
Development of a novel colorimetric indicator pad for detecting aldehydes
714
Development of a Novel Combined Catalyst and Sorbent for Hydrocarbon Reforming
715
Development of a novel combustion synthesis method for synthesizing of ceramic oxide powders
716
Development of a novel common-rail type Dimethyl ether (DME) injector
717
Development of a novel composite aluminum anode
718
Development of a novel computational tool for optimizing the operation of fuel cells systems: Application for phosphoric acid fuel cells
719
Development of a novel decal transfer process for fabrication of high-performance and reliable membrane electrode assemblies for PEMFCs
720
Development of a novel dental shade determination application
721
Development of a novel device for applying uniform doses of electron beam irradiation on carcasses
722
Development of a novel direction-position sensing fast neutron detector using tensioned metastable fluids
723
Development of a novel direction-position sensing fast neutron detector using tensioned metastable fluids
724
Development of a novel DNA detection system for real-time detection of DNA hybridization
725
Development of a novel DNA detection system for real-time detection of DNA hybridization
726
DEVELOPMENT OF A NOVEL DRUG-COATED STENT USING CURCUMIN AS ANTIPROLIFERATIVE DRUG
727
Development of a Novel Echocardiography Ramp Test for Speed Optimization and Diagnosis of Device Thrombosis in Continuous-Flow Left Ventricular Assist Devices: The Columbia Ramp Study
728
Development of a novel economical device to improve post-harvest processing practices on small farms
729
Development of a novel electric field-assisted modified hydrodynamic cavitation system for disintegration of waste activated sludge
730
Development of a novel electric field-assisted modified hydrodynamic cavitation system for disintegration of waste activated sludge
731
Development of a novel electrochemical cell for slab optical waveguide spectroscopy for in situ observation of methylene blue and anions on an electrode/electrolyte interface
732
Development of a novel electrokinetically driven microfluidic immunoassay for the detection of Helicobacter pylori Original Research Article
733
Development of a novel electrophoresis-UV grafting technique to modify PES UF membranes used for NOM removal
734
Development of a novel ELISA for human insulin using monoclonal antibodies produced in serum-free cell culture medium
735
Development of a novel enzyme/semiconductor nanoparticles system for biosensor application
736
Development of a novel epitaxial-layer segmentation method for optoelectronic device fabrication
737
Development of a novel europium(III) complex-based luminescence probe for time-resolved luminescence imaging of the nitric oxide production in neuron cells
738
Development of a Novel Floating In-situ Gelling System for Stomach Specific Drug Delivery of the Narrow Absorption Window Drug Baclofen
739
Development of a novel flow injection liquid–liquid microextraction method for the on-line separation and preconcentration for determination of zinc(II) using 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a sensitive and selective
740
Development of a novel fluidized bed ash cooler for circulating fluidized bed boilers: Experimental study and application
741
Development of a novel fluorescent probe for fluorescence correlation spectroscopic detection of kinase inhibitors
742
Development of a novel fluorescent sensor to detect a specific range of pH
743
Development of a novel fluorescent tag O-2-[aminoethyl]fluorescein for the electrophoretic separation of oligosaccharides Original Research Article
744
Development of a novel fluorimetric bulk optode membrane based on meso-tetrakis(2-hydroxynaphthyl) porphyrin (MTHNP) for highly sensitive and selective monitoring of trace amounts of Hg2 + ions
745
Development of a novel gas sensor based on oxide thick films
746
Development of A Novel Gene Expression System for Secretory Production of Heterologous Proteins via the General Secretory (Sec) Pathway in Corynebacterium glutamicum
747
Development of a novel gene transfer system for Cajanus cajan and expression of a monocot arginine decarboxylase cDNA in transformed cell lines
748
Development of a Novel Growth Model Based on the Central Limit Theorem for the Determination of Beef Spoilage
749
Development of a Novel Hapten for Radioimmunoassay of the Lignan, Enterolactone in Plasma (Serum). Total Synthesis of (±)-trans-5-Carboxymethoxyenterolactone and Several Analogues
750
Development of a novel high optical quality ZnO thin films by PLD for III–V opto-electronic devices
751
Development of a novel high performance filtration system — Application for various hardly filterable materials
752
Development of a novel high performance filtration system — Optimization of operating conditions
753
Development of a novel high speed (electron-mobility) epi-n-ZnO thin films by L-MBE for III–V opto-electronic devices
754
Development of a novel high volume band compression injector for the analysis of complex samples like toxaphene pesticide
755
Development of a Novel Human Single Chain Antibody Against EGFRVIII Antigen by Phage Display Technology
756
Development of a novel hybrid aluminum-based composite with enhanced properties
757
Development of a novel hydrate-based refrigeration system: A preliminary overview
758
Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas diffusion layer in PEMFC
759
Development of a novel inherently stabilised honeycomb-type membrane module Original Research Article
760
Development of a Novel Inhibitory Chimeric Anti-HER2 Monoclonal Antibody
761
Development of a novel integrated continuous reactor system for biocatalytic production of biodiesel
762
Development of a novel ion energy analyser to measure the energy distribution function f(v∩, v|) of end-loss ions from FRC plasmas
763
Development of a novel ionic support and its application in the ionic liquid phase assisted synthesis of a potent antithrombotic
764
Development of a novel ketoprofen transdermal patch: Effect of almond oil as penetration enhancers on in-vitro and ex-vivo penetration of ketoprofen through rabbit skin
765
Development of a novel label-free amperometric immunosensor for the detection of okadaic acid Original Research Article
766
Development of a novel label-free amperometric immunosensor for the detection of okadaic acid Original Research Article
767
Development of a novel lateral force-sensing microindentation technique for determination of interfacial bond strength Original Research Article
768
Development of a novel LC/MS method to quantitate cellular stearoyl-CoA desaturase activity Original Research Article
769
Development of a novel LC–MS/MS method for the determination of letosteine in human plasma and its application on pharmacokinetic studies
770
Development of a novel liquid chromatography — Evaporative light scattering detection method for bacitracins and applications to quality control of pharmaceuticals Original Research Article
771
Development of a novel live vaccine delivering enterotoxigenic Escherichia coli fimbrial antigens to prevent post-weaning diarrhea in piglets
772
Development of a novel live vaccine delivering enterotoxigenic Escherichia coli fimbrial antigens to prevent post-weaning diarrhea in piglets
773
Development of a novel lot-sizing model with variable lead time in supply chain environment
774
Development of a Novel Lot-sizing Model with Variable Lead Time in Supply Chain Environment
775
Development of a novel low-flow ion source/sampling cone geometry for inductively coupled plasma mass spectrometry and application in hyphenated techniques
776
Development of a novel low-flow ion source/sampling cone geometry for inductively coupled plasma mass spectrometry and application in hyphenated techniques
777
Development of a novel macrostructured cathode for large-area neutron detectors based on the 10B-containing solid converter
778
Development of a novel macrostructured cathode for large-area neutron detectors based on the 10B-containing solid converter
779
Development of a novel magnesium–copper based composite with improved mechanical properties
780
Development of a novel market forecasting tool and its application to hydrogen energy production in Scotland
781
Development of a novel meshless Local Kriging (LoKriging) method for structural dynamic analysis Original Research Article
782
Development of a novel meso-scale vapor compression refrigeration system (mVCRS)
783
Development of a novel method based on liquid chromatography–evaporative light scattering detection for the direct determination of streptomycin and dihydrostreptomycin in raw materials, pharmaceutical formulations, culture media and plasma
784
Development of a novel method combining HPLC fingerprint and multi-ingredients quantitative analysis for quality evaluation of traditional chinese medicine preparation
785
Development of a novel method for Copper sorption: An application of Taguchi Method
786
Development of a novel method for detecting the integrity of aseptic paperboard laminate packages containing aluminium foil
787
Development of a novel method for hot-pressure extraction of protein from chicken bone and the effect of enzymatic hydrolysis on the extracts
788
Development of a novel method for isolating and detecting Cryptosporidium parvum from lean and fat beef carcass surfaces Original Research Article
789
Development of a novel method for mechanical plating using ultrasonic vibrations
790
Development of a novel method for monitoring the antioxidative effect of ascorbic acid in rat blood
791
Development of a novel method for screening of estrogenic compounds using nano-sized bacterial magnetic particles displaying estrogen receptor Original Research Article
792
Development of a novel method for surgical implant design optimization through noninvasive assessment of local bone properties
793
Development of a Novel Method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder
794
Development of a novel method of tube bending using finite element simulation
795
Development of a novel method to measure the film thickness of cured can coatings Original Research Article
796
Development of a novel method to prepare Fe- and Al-doped TiO2 from wastewater
797
Development of a novel methodology for indoor emission source identification
798
Development of a Novel Methodology To Validate Optimal Sterilization Conditions for Maximizing the Texture Quality of White Beans in Glass Jars
799
Development of a Novel Methodology To Validate Optimal Sterilization Conditions for Maximizing the Texture Quality of White Beans in Glass Jars
800
Development of a novel microarray methodology for the study of SNPs in the promoter region of the TNF-α gene—Their association with obstructive pulmonary disease in Greek patients
801
Development of a novel micro-assay for evaluation of peroxyl radical scavenger capacity: Application to carotenoids and structure–activity relationship
802
Development of a novel microextraction by packed sorbent-based approach followed by ultrahigh pressure liquid chromatography as a powerful technique for quantification phenolic constituents of biological interest in wines
803
Development of a Novel Modular and Agile Face Machining Technology
804
Development of a novel mouse osteoclast culture system including cells of mandibular body and erupting teet h
805
Development of a novel multi-capillary, multi-temperature commercial refrigerator cabinet with common low-pressure receiver
806
Development of a Novel Multi-Epitope Vaccine Candidate against Streptococcus Iniae Infection in Fish: An Immunoinformatics Study
807
Development of a novel multiplex PCR assay for the identification of Salmonella enterica Typhimurium and Enteritidis
808
Development of a novel MWCNTs–triazene-modified carbon paste electrode for potentiometric assessment of Hg(II) in the aquatic environments
809
Development of a Novel Niosomal Formulation for Gabapentin
810
Development of a novel nucleoside analogue with S-type sugar conformation: 2′-deoxy-trans-3′,4′-bridged nucleic acids
811
Development of a novel optimization tool for electron linacs inspired by artificial intelligence techniques in video games
812
Development of a novel optimization tool for electron linacs inspired by artificial intelligence techniques in video games
813
Development of a novel particle size control system for hammer milling
814
Development of a novel phase-field method for local stress-based shape and topology optimization
815
Development of a novel photocatalytic reaction system for oxidative decomposition of volatile organic compounds in water with enhanced aeration
816
Development of a novel pixel-level signal processing chain for fast readout 3D integrated CMOS pixel sensors
817
Development of a novel pixel-level signal processing chain for fast readout 3D integrated CMOS pixel sensors
818
Development of a novel portable-size PEMFC short stack with electrodeposited Pt hydrogen diffusion anodes
819
Development of a novel pressure sensing material based on polypyrrole-coated electrospun poly(vinylidene fluoride) fibers
820
Development of a novel pressure swing adsorption dehydration system for the preservation of dermal tissue
821
Development of a Novel Probiotic Yogurt “PENTOYO” with a Fully Sequenced Lactobacillus pentosus KCA1 and its Survival during Storage at 4°C
822
Development of a novel process for biodiesel production from palm fatty acid distillate (PFAD)
823
Development of a novel pulse wave velocity measurement system: Using dual piezoelectric elements
824
Development of a novel PVC-membrane fluorescent sensor based on N,N′-bis(dansylamidoethyl)-N,N′-bis(2-pyridylmethyl)propylene-diamine as a new fluoroionophore for highly sensitive and selective monitoring of trace amounts of La3+ ions in aqueous solutions
825
Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products
826
Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products
827
Development of a novel radial cathode flow field for PEMFC
828
Development of a novel reactor for the oxidative degradation of straw
829
Development of a novel refrigeration system for refrigerated trucks incorporating phase change material
830
Development of a novel rhodamine-type fluorescent probe to determine peroxynitrite
831
Development of a novel roving-treatment process employing sequential chelating agent and enzymatic stages, utilising thermal analysis for assessment of fibre and yarn quality
832
Development of a novel Ru-based catalyst system for the selective oxidation of CO in hydrogen rich gas mixtures Original Research Article
833
Development of a novel running buffer for the simultaneous determination of nitrate and nitrite in human serum by capillary zone electrophoresis
834
Development of a novel SCADA system for laboratory testing
835
Development of a novel scintillation-trigger detector for the MTV experiment using aluminum-metallized film tapes
836
Development of a novel scintillation-trigger detector for the MTV experiment using aluminum-metallized film tapes
837
Development of a Novel Scoring System for Comprehensive COVID-19 Patient Evaluation: An Evidence-Based Systematic Review
838
Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP)
839
Development of a novel simulated diesel particulate matter generator system
840
Development of a novel slurry condensation method by applying dispersant instead of flocculant
841
Development of a novel solid-phase extraction element for thermal desorption gas chromatography analysis
842
Development of a novel solids feed system for high pressure gasification
843
Development of a novel sports medicine rotation for emergency medicine residents
844
Development of a novel starch-derived porous silica monolith for enhancing the dissolution rate of poorly water soluble drug
845
Development of a novel statistical model for mandibular kinematics
846
Development of a novel strategy for preconcentration of antibiotic residues in milk and their quantitation by capillary electrophoresis
847
Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application
848
Development of a novel supercritical fluid extraction procedure for lanolin extraction from raw wool Original Research Article
849
Development of a novel synergistic thermosensitive gel for vaginal candidiasis: An in vitro, in vivo evaluation
850
Development of a novel synthetic loaded separator paper for VRLA batteries
851
Development of a novel system for assessing tooth and restoration wear
852
Development of a Novel Temporary Epicardial Pacing Wire With Biodegradable Film
853
Development of a novel terbium(III) chelate-based luminescent probe for highly sensitive time-resolved luminescence detection of hydroxyl radical
854
Development of a novel therapeutic suppressor of brain proinflammatory cytokine up-regulation that attenuates synaptic dysfunction and behavioral deficits
855
Development of a Novel Three-Dimensional Biocompatible Nanofibrous Scaffold for the Expansion and Hepatogenic Differentiation of Human Bone Marrow Mesenchymal Stem Cells
856
Development of a novel three-stage fermentation system converting food waste to hydrogen and methane
857
Development of a novel tool for semiconductor process control
858
Development of a novel two-stage liquid desiccant dehumidification system assisted by CaCl2 solution using exergy analysis method
859
Development of a novel type of composite cathode material for proton-conducting solid oxide fuel cells
860
Development of a novel ultrasound monitoring system for container filling operations
861
Development of a novel ultrasound-assisted headspace liquid-phase microextraction and its application to the analysis of chlorophenols in real aqueous samples
862
Development of a novel ultrasound-assisted surfactant-enhanced emulsification microextraction method and its application to the analysis of eleven polycyclic aromatic hydrocarbons at trace levels in water
863
DEVELOPMENT OF A NOVEL UWB VIVALDI ANTENNA ARRAY USING SIW TECHNOLOGY
864
Development of a novel vibration-based fatigue testing methodology
865
Development of a Novel Whey Beverage by Fermentation with Kefir Granules. Effect of Various Treatments
866
Development of a Novel Wind Turbine Simulator for Wind Energy Conversion Systems Using an Inverter-Controlled Induction Motor
867
Development of a novel, FTIR (Fourier transform infrared spectroscopy) based, yeast bioassay for toxicity testing and stress response study Original Research Article
868
Development of a novel-synthesized Ca-based CO2 sorbent for multicycle operation: Parametric study of sorption
869
Development of a nuclear-thermal coupled calculation code system
870
Development of a nucleation inhibitive coated mold for the rapid solidification of superalloy melt
871
Development of a numeric health care worker risk-assessment scale to evaluate potential for blood-borne pathogen exposures
872
Development of a numerical analysis methodology for the multi-dimensional and multi-phase phenomena of a sodium–water reaction in an SFR steam generator
873
Development of a numerical comparator for protective relaying. I
874
Development of a numerical comparator for protective relaying: Part II
875
Development of a numerical hydraulic model of the Los Azufres steam pipeline network
876
Development of a Numerical Index to Assess the Quality of Websites Design
877
Development of a numerical model for bridge–vehicle interaction and human response to traffic-induced vibration
878
Development of a numerical model for cake layer formation on a membrane Original Research Article
879
Development of a numerical model for natural gas steam reforming and coupling with a furnace model
880
Development of a numerical model for the damage identification on composite plate structures
881
Development of a numerical model for the evaluation of the urban thermal environment
882
Development of a numerical model for the evaluation of the urban thermal environment
883
Development of a numerical model for the fluid dynamic simulation of an ascending flow ripening chamber Original Research Article
884
Development of a numerical model for the simulation of vertical U-tube ground heat exchangers
885
Development of a numerical model to predict heat exchange rates for a ground-source heat pump system
886
Development of a numerical model to simulate the biological inactivation of airborne microorganisms in the presence of ultraviolet light
887
Development of a numerical simulation model for long-range migration of rice planthoppers
888
Development of a numerical simulation system toward comprehensive assessments of urban warming countermeasures including their impacts upon the urban buildingsʹ energy-demands
889
Development of a nurse-led sedation service for paediatric magnetic resonance imaging
890
Development of a nurse-led tranexamic acid administration protocol for trauma patients in rural South Africa
891
Development of a nursing practice based competency model for the Flemish master of nursing and obstetrics degree
892
Development of a nutrient database and distributions for use in a probabilistic risk–benefit analysis of human seafood consumption
893
Development of a nutrient database and distributions for use in a probabilistic risk–benefit analysis of human seafood consumption
894
Development of a nutritional screening or assessment tool using a multivariate technique
895
Development of a nutritional strategy for increasing lamb survival in Merino ewes mated in late spring/early summer
896
Development of a one point quadrature shell element for nonlinear applications with contact and anisotropy Original Research Article
897
Development of a One Step Strip Test for the Detection of (Dihydro)streptomycin Residues in Raw Milk
898
Development of a one-dimensional microstrip germanium detector for Compton scattering experiment at SPring-8
899
Development of a one-dimensional microstrip germanium detector for Compton scattering experiment at SPring-8
900
Development of a one-parameter variable source area runoff model for ungauged basins
901
Development of a one-pot method for the homologation of aldehydes to carboxylic acids
902
Development of a one-pot sequential Sonogashira coupling for the synthesis of benzofurans
903
Development of a one-step immunochromatographic strip test for the rapid detection of nevirapine (NVP), a commonly used antiretroviral drug for the treatment of HIV/AIDS
904
Development of a one-step integrated pressurized liquid extraction and cleanup method for determining polycyclic aromatic hydrocarbons in marine sediments
905
Development of a one-step microwave-assisted extraction method for simultaneous determination of organophosphorus pesticides and fungicides in soils by gas chromatography–mass spectrometry
906
Development of a one-step test strip for rapid screening of fumonisins B1, B2 and B3 in maize
907
Development of a package model for process simulation and cost estimation of seawater reverse osmosis desalination plant Original Research Article
908
Development of a packed bed regenerative solution heat exchanger (R-SHX) for a single stage LiBr–H2O vapour absorption refrigeration (VAR) system
909
DEVELOPMENT OF A PACKED PRECOLUMN FOR CAPILLARY GAS CHROMATOGRAPHIC ANALYSIS OF AMINES IN ACIDIC AQUEOUS SOLUTION
910
DEVELOPMENT OF A PACKED PRECOLUMN FOR CAPILLARY GAS CHROMATOGRAPHIC ANALYSIS OF AMINES IN ACIDIC AQUEOUS SOLUTION
911
Development of a padless ultraprecision polishing method using electrorheological fluid
912
Development of a pain assessment tool for the older adults in Korea: The validity and reliability of a Korean version of the geriatric pain measure (GPM-K)
913
Development of a pair of differential H/D isotope-coded derivatization reagents d0/d3-4-(1-methyl-1H-phenanthro[9,10-d]imidazol-2-yl)phenlamine and its application for determination of aldehydes in selected aquatic products by liquid chromatography–tandem
914
Development of a pair potential for Fe–He by lattice inversion
915
Development of a palladium catalyzed addition of boronic acids to alkynyl esters: synthesis of trisubstituted olefins as single isomers
916
Development of a palladium-catalyzed decarboxylative cross-coupling of (2-azaaryl)carboxylates with aryl halides
917
Development of a Papua New Guinean onshore carbonate reservoir: A comparative borehole image (FMI) and petrographic evaluation
918
Development of a paradigm for measuring somatic disturbance in clinical populations with medically unexplained symptoms
919
Development of a parallel demodulation system used for extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors
920
Development of a parallel direct simulation code to investigate reactive flows
921
Development of a parallel implicit solver of fluid modeling equations for gas discharges Original Research Article
922
Development of a parallel plate proportional counter TRD with suppressed sensitivity to ionization
923
Development of a parallel Poissonʹs equation solver with adaptive mesh refinement and its application in field emission prediction Original Research Article
924
Development of a parallel semi-implicit two-dimensional plasma fluid modeling code using finite-volume method Original Research Article
925
Development of a parallel storm surge model
926
Development of a parallelized 3D electrostatic PIC-FEM code and its applications Original Research Article
927
Development of a parametric model and virtual machine to estimate task specific measurement uncertainty for a five-axis multi-sensor coordinate measuring machine
928
Development of a parathion sensor based on molecularly imprinted nano-TiO2 self-assembled film electrode
929
Development of a participatory monitoring and evaluation strategy
930
Development of a participatory tool for the evaluation of Village Animal Health Workers in Cambodia
931
Development of a particle deposition meter
932
Development of a particle size distribution measurement method at high temperature by use of classification during sampling
933
Development of a particulate emulsifier by mechanochemical treatment and application to the liquid-liquid extraction process
934
Development of a passive doas system to retrieve atmospheric pollution columns in the 200 to 355 nm region
935
Development of a passive sampler for gaseous mercury
936
Development of a passive sampling technique for the determination of nitrogen dioxide and sulphur dioxide in ambient air
937
Development of a patent document classification and search platform using a back-propagation network
938
Development of a Patent Retrieval and Analysis Platform – A hybrid approach
939
Development of a pathogen transport model for Irish catchments using SWAT
940
Development of a Pathotype Specific SCAR Marker in Plasmodiophora brassicae
941
Development of a patient-based questionnaire about emotional and social issues related to eating with dentures
942
Development of a patient-based questionnaire about emotional and social issues related to eating with dentures
943
Development of a patient-reported outcome questionnaire for use in adults with moderate-to-severe plaque psoriasis: The Psoriasis Symptoms and Signs Diary
944
Development of a Patient-Specific Finite Element Model for Predicting Implant Failure in Pelvic Ring Fracture Fixation
945
Development of a patient-specific simulation tool to analyse aortic dissections: Assessment of mixed patient-specific flow and pressure boundary conditions
946
Development of a Pavement Overall Deterioration Index (Case Study: Iran)
947
Development of a PC interface board for true color control using an Ar–Kr white-light laser
948
Development of a PC-based Open Architecture Software-CNC System
949
Development of a PCL/gelatin/chitosan/β-TCP electrospun composite for guided bone regeneration
950
Development of a PCR assay for the detection of nifH and nifD genes in indigenous photosynthetic bacteria
951
Development of a PCR Assay for the Molecular Detection of Phytophthora boehmeriae in Infected Cotton
952
Development of a PCR assay for the strain-specific identification of probiotic strain Lactobacillus paracasei IMPC2.1
953
Development of a PCR assay to detect mycoplasma contamination in cord blood hematopoietic stem cells
954
Development of a PCR protocol to detect ochratoxin A producing moulds in food products
955
Development of a PCR protocol to detect patulin producing moulds in food products
956
Development of a PCR test to detect the downy mildew causal agent Plasmopara halstedii in sunflower seeds
957
Development of a PCR-based Assay for the Detection of Plasmodiophora brassicae in Soil
958
Development of a PCR-based assay to detect Shiga toxin-producing Escherichia coli, Listeria monocytogenes, and Salmonella in milk Original Research Article
959
Development of a PCR-based diagnostic test for Spongospora subterranea f.sp. nasturtii, the causal agent of crook root of watercress (Rorippa nasturtium-aquaticum)
960
Development of a PCR-based marker for studying allelic variation of Hd3a in rice and its effect on flowering time
961
Development of a PCR-compatible enrichment medium for Yersinia enterocolitica: amplification precision and dynamic detection range during cultivation
962
Development of a PCR-culture technique for rapid detection of yeast species in vacuum packed ham
963
Development of a PDMS-grafted alumina membrane and its evaluation as solvent resistant nanofiltration membrane
964
Development of a pedestrian bridge with GFRP profiles and fiber reinforced self-compacting concrete deck
965
Development of a peer-to-peer information sharing system using ontologies
966
Development of a PEFC under low humidified conditions
967
DEVELOPMENT OF A PELLET SCALE MODEL FOR TRICKLE BED REACTOR USING CFD TECHNIQUES
968
Development of a PEM fuel cell powered portable field generator for the dismounted soldier
969
Development of a PEM stack and performance analysis including the effects of water content in the membrane and cooling method
970
Development of a penetration test for timber impregnation products for use in old buildings
971
Development of a Penning trap system in Munich
972
Development of a pentaplex PCR assay for the simultaneous detection of Streptococcus thermophilus, Lactobacillus delbrueckii subsp. bulgaricus, L. delbrueckii subsp. lactis, L. helveticus, L. fermentum in whey starter for Grana Padano cheese
973
Development of a pepper pot emittance probe and its application for ECR ion beam studies
974
Development of a pepper pot emittance probe and its application for ECR ion beam studies
975
Development of a Peptide Antibody Specific to Human Glutathione S-Transferase Alpha 4-4 (hGSTA4-4) Reveals Preferential Localization in Human Liver Mitochondria
976
Development of a peptide inhibitor-based cantilever sensor assay for cyclic adenosine monophosphate-dependent protein kinase Original Research Article
977
Development of a peptide mapping procedure to identify and quantify methionine oxidation in recombinant human α1-antitrypsin
978
Development of a Perception Scale on the Use of Webquests
979
Development of a performance test method for PEFC stack
980
Development of a perfusion ion-exchange chromatography method for the separation of soybean proteins and its application to cultivar characterization
981
Development of a perfusion reversed-phase high performance liquid chromatography method for the characterisation of maize products using multivariate analysis
982
Development of a Permanent Device for Fertility Period Detection by Basal Body Temperature and Analysis of the Cervical Mucus Potential of Hydrogen
983
Development of a permeability apparatus for concrete and mortar
984
Development of a Persian Mobile Sales Chatbot based on LLMs and Transformer
985
Development of a personal dosimetry system based on optically stimulated luminescence of α-Al2O3 : C for mixed radiation fields
986
Development of a perturbative approach for Monte Carlo simulations using a hybrid ab initio QM/MM method
987
Development of a PET detector module with Depth of Interaction capability
988
Development of a PET detector module with Depth of Interaction capability
989
Development of a PFM code for evaluating reliability of pressure components subject to transient loading
990
Development of a PFM code for evaluating reliability of pressure components subject to transient loading Original Research Article
991
Development of a Pharmacokinetic/Pharmacodynamic Model for Carvedilol to Predict β1-Blockade in Patients with Congestive Heart Failure
992
Development of a phase counter with real-time fringe jump corrector for heterodyne interferometer on LHD
993
Development of a Phase-Change Model for the Volume-of-Fluid Method in OpenFOAM
994
Development of a phenomenological scaling law for fractal aggregate sintering from molecular dynamics simulation
995
Development of a phenyl membrane chromatography-based process yielding pharmaceutical grade plasmid deoxyribonucleic acid for mammalian cells transfection
996
Development of a Phosphatase-Stable Phosphotyrosyl Mimetic Suitably Protected for the Synthesis of High-Affinity Grb2 SH2 Domain-Binding Ligands
997
Development of a photobioreactor incorporating Chlorella sp. for removal of CO2 in stack gas
998
Development of a photochemical airshed model for Sydney, New South Wales, Australia
999
Development of a photochemically induced fluorescence-based optosensor for the determination of imidacloprid in peppers and environmental waters
1000
Development of a photocurable gelatin-based gelation material for application to periodontal regeneration
