<< مقالات لاتين >>
<< بر اساس عنوان >>
1
EXPERIMENTAL STUDY ON LARGE-AMPLITUDE VIBRATIONS OF WATER-FILLED CIRCULAR CYLINDRICAL SHELLS
2
Experimental study on lateral mixing of particles in a quasi-slot-rectangular spouted bed
3
Experimental study on LBB behaviour of LMFBR pipe elbows
4
Experimental Study on Light Weight Concrete-Filled Steel Tubes
5
Experimental study on liquid flow and heat transfer in micro square pin fin heat sink
6
Experimental study on local buckling of axially compressed steel stub columns at elevated temperatures
7
Experimental study on local characteristics of oil–water dispersed flow in a vertical pipe
8
Experimental study on locomotive driver cabin adsorption air conditioning prototype machine
9
Experimental Study on Loop Heat Pipe Under Horizontal Condition With Different Working Fluids
10
Experimental Study on Low-Frequency Oscillating Behavior in Mechanically-Ventilated Compartment Fires
11
Experimental study on lubrication regime variation in point contacts
12
Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
13
Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
14
Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks
15
Experimental study on marangoni convection and solidification in BaB2O4 melt
16
Experimental study on Marangoni effect induced by heat and mass transfer
17
Experimental study on mass transfer of a co-current gas–liquid contactor performing under high gas velocities
18
Experimental study on mass transfer performances of cross flow dehumidifier using liquid desiccant
19
Experimental study on material properties of hot rolled and continuously cast aluminum strips in cold rolling
20
Experimental study on mechanical behavior of brittle marble samples containing different flaws under uniaxial compression
21
Experimental study on mechanical behavior of laminates at low temperature Original Research Article
22
Experimental study on mechanical performance of all-softwood pegged mortice and tenon connections
23
EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES AND MICROSTRUCTURES IN A 36 REPAIR BUTT WELDMENT
24
Experimental study on mechanical properties of different lightweight aggregate concretes
25
Experimental Study on Mechanical Properties of Randomly Oriented Natural Fiber Hybrid Composites
26
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag
27
Experimental study on mechanism of rail corrugation using corrugation simulator
28
Experimental study on melting/solidification characteristics of a paraffin as PCM
29
Experimental study on mercury release behavior and speciation during pyrolysis of two different coals
30
Experimental study on mercury transformation and removal in coal-fired boiler flue gases
31
Experimental study on methanol recovery through flashing vaporation in continuous production of biodiesel via supercritical methanol
32
Experimental study on micellar-enhanced ultrafiltration (MEUF) of aqueous solution and wastewater containing lead ion with mixed surfactants Original Research Article
33
Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode
34
Experimental study on micro modular combustor for micro-thermophotovoltaic system application
35
Experimental Study on Microbial Induced Calcium Carbonate Precipitation to Enhance Reservoir Recovery
36
Experimental study on microchannel heat sinks considering mass flow distribution with non-uniform heat flux conditions
37
Experimental study on microscopic moving characteristics of pedestrians in built corridor based on digital image processing
38
Experimental study on microscopic wear mechanism of copper/carbon/rice bran ceramics composites
39
Experimental study on microwave drying of Chinese and Indonesian low-rank coals
40
Experimental study on mitigating the cathode flooding at low temperature by adding hydrogen to the cathode reactant gas in PEM fuel cell
41
Experimental Study on Mixed Convection Heat Transfer in a Square Duct with Varying Inclination Angles
42
Experimental study on mixing and precipitation in a fluidized bed reactor
43
Experimental study on mode I fracture toughness of different asphalt mixtures
44
Experimental Study on Moment-Plastic Rotation Capacity of Hybrid Beams
45
Experimental study on moving neutralization reaction boundary created with the strong reactive electrolytes of HCl and NaOH in agarose gel
46
Experimental study on multicomponent distillation in packed columns
47
Experimental study on multi-layered type of gas-to-gas heat exchanger using porous media
48
Experimental study on multi-pass dieless drawing process of superplastic Zn–22%Al alloy microtubes
49
Experimental study on multi-split air conditioner with digital scroll compressor
50
Experimental study on natural circulation precooling of cryogenic pump system with gas phase inlet reflux configuration Original Research Article
51
Experimental study on natural convective heat transfer from a vertical plate with discrete heat sources mounted on the back
52
Experimental study on natural ventilation performance of one-sided wind catcher
53
Experimental study on neptunium migration under in situ geochemical conditions
54
Experimental study on neutrinoless double beta decay of
55
Experimental study on neutrinoless double beta decay of
56
Experimental study on new hybrid approach to electron multiplication
57
Experimental study on new hybrid approach to electron multiplication
58
Experimental study on non-equilibrium fraction of NaCl solution circulatory flash evaporation Original Research Article
59
Experimental study on non-woody biomass gasification in a downdraft gasifier
60
Experimental study on NOx reduction from staging combustion of high volatile pulverized coals. Part 1. Air staging
61
Experimental study on nucleate boiling enhancement and bubble dynamic behavior in saturated pool boiling using a nonuniform dc electric field
62
Experimental study on oil–water flow in horizontal and slightly inclined pipes
63
Experimental study on operating parameters of miniature loop heat pipe with flat evaporator
64
Experimental study on optimized composition of mixed carbonate salt for sensible heat storage in solar thermal power plant
65
Experimental Study on Overall Cooling Effectiveness of Turbine Nozzle Guide Vane with Impingement-Cutback Structure
66
Experimental study on parallel and counter flow configuration of a shell and helically coiled tube heat exchanger using AI2O3 / water nanofluid
67
Experimental study on partially deteriorated strength concrete columns confined with CFRP
68
Experimental study on particle fluctuation velocity of a horizontal pneumatic conveying near the minimum conveying velocity
69
Experimental study on particles mixing in an annular spouted bed
70
Experimental study on particulate and NOx emissions of a diesel engine fueled with ultra low sulfur diesel, RME-diesel blends and PME-diesel blends Original Research Article
71
Experimental study on particulate emission of a diesel engine fueled with blended ethanol–dodecanol–diesel
72
Experimental study on passive Soil Depressurisation System to prevent soil gaseous pollutants into building
73
Experimental Study On Performance and Emissions Of A Diesel Engine Using Ethanol and Biodiesel Blended Diesel Fuels
74
Experimental study on performance and emissions of a high speed diesel engine fuelled with n-butanol diesel blends under premixed low temperature combustion
75
Experimental study on performance and emissions of engine fueled with lower heat value gas–hydrogen mixtures
76
Experimental study on performance and exhaust emissions of a diesel engine fuelled with Ceiba pentandra biodiesel blends
77
Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics
78
Experimental study on performance improvement of a four-bed adsorption chiller by using heat and mass recovery
79
Experimental Study on Performance of Ductile and Non-ductile Reinforced Concrete Exterior Beam-column Joint
80
Experimental Study on Performance of Fiber Concrete-filled Tube Columns under Axial Loading
81
Experimental Study on Performance of Modified Hybrid Liquid Membrane Process for Removal of Cadmium from Wastewater
82
Experimental study on performance of repaired and strengthened unreinforced masonry walls using polypropylene bands
83
Experimental study on permeability of crushed gangues during compaction
84
Experimental Study on Permeability Stress Sensitivity in Tight Sandstone Oil Reservoirs
85
Experimental study on phase relationships in the Si-rich portion of the Nb–Si–W ternary system
86
Experimental Study on Photovoltaic Cooling System Integrated With Carbon Nano Fluid
87
Experimental study on physiological and psychological effects of heat acclimatization in extreme hot environments
88
Experimental study on Plasmodium bergheiAnopheles stephensiBALB/c mouse system; implications for malaria transmission blocking assays
89
Experimental study on polymer-modified mortars with silica fume applied to fix porcelain tile
90
Experimental study on porous current collectors of PEM electrolyzers
91
Experimental study on Portland cement pervious concrete mechanical and hydrological properties
92
Experimental study on preheating and combustion characteristics of pulverized anthracite coal
93
Experimental study on premixed CH4/air mixture combustion in micro Swiss-roll combustors
94
Experimental Study on Premixed Flame Acceleration in Closed Pipe
95
Experimental study on premixed hydrogen/air and hydrogen–methane/air mixtures explosion in 90 degree bend pipeline
96
Experimental study on preparation of LaMO3 (M = Fe, Co, Ni) nanocrystals and their catalytic activity
97
Experimental study on pressure drop and heat transfer in pipelines for brine based ice slurry Part II: Dimensional analysis and rheological model
98
Experimental study on pressure drop and heat transfer in pipelines for brine based ice slurry. Part I: Operational parameters correlations
99
Experimental study on pressure drops in a dividing wall distillation column
100
Experimental Study on Preventing Formation Damage Due to Clay Swelling Caused by Water Based Drilling Fluid Using Aluminum Ion Based Clay Inhibitor
101
Experimental study on process of cold-power spinning of Ti–15–3 alloy
102
Experimental study on process of precision forging of an aluminium-alloy rotor
103
Experimental study on propagation of hydraulic fracture in volcanic rocks using industrial CT technology
104
Experimental study on propane combustion in a novel fluidized bed configuration
105
Experimental study on properties of pervious concrete pavement materials
106
Experimental study on properties of polymer-modified cement mortars with silica fume
107
Experimental Study on Protective Role of NSAID on Articular Cartilage Destruction in Septic Arthritis
108
Experimental study on prototype optimisation algorithms for prototype-based classification in vector spaces
109
Experimental study on pulsating heat pipe with functional thermal fluids
110
Experimental study on pulse tube refrigeration with helium and nitrogen mixtures Original Research Article
111
Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid
112
Experimental study on p–V indicator diagrams of twin-screw refrigeration compressor with economizer
113
Experimental study on PV module recycling with organic solvent method
114
Experimental study on pyrolysis of thermally thick biomass residues samples: Intra-sample temperature distribution and effect of sample weight (“scaling effect”)
115
Experimental study on R-134a refrigeration system using a two-phase ejector as an expansion device
116
Experimental study on R-600a boiling in 2.6 mm tube
117
Experimental study on radiation performance of probe-fed suspended plate antennas
118
Experimental study on radiative properties of air plasma sprayed thermal barrier coatings
119
Experimental study on rapid solidification process using a novel ultrasound technique
120
Experimental study on rapid solidification process using a novel ultrasound technique
121
Experimental study on ratcheting behavior of eutectic tin–lead solder under multiaxial loading
122
Experimental study on ratchetting-fatigue interaction of SS304 stainless steel in uniaxial cyclic stressing
123
Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips
124
Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips
125
EXPERIMENTAL STUDY ON RATE OF SOLIDIFICATION OF CENTRIFUGAL CASTING
126
Experimental Study on Rational Water Injection Rate in Continental Sandstone Reservoirs
127
Experimental study on ratios of coherent scattering to Compton scattering for elements with atomic numbers 26⩽Z⩽82 in 59.5 keV for 55° and 115°
128
Experimental study on RC beams with FRP strips bonded with rubber modified resins
129
Experimental Study on RC Deep Beams with Non-Prestressed Tendons as Main Reinforcement
130
Experimental study on reactive power compensation using a fuzzy logic controlled synchronous motor
131
Experimental study on reburning/advanced reburning performance of limestone modified by wood vinegar for NO reduction under O2/CO2 atmosphere
132
Experimental Study on Recycled Concrete Aggregates with Rice Husk Ash as Partial Cement Replacement
133
Experimental study on reducing cogging torque and no-load power loss in axial-flux permanent-magnet machines with slotted winding
134
Experimental study on reducing the noise of horizontal household freezers
135
Experimental study on regaining the tangential velocity energy of axial flow pump
136
Experimental study on rehabilitation of corrosion-damaged reinforced concrete beams with carbon fiber reinforced polymer
137
Experimental Study on Rehabilitation of RC Beams Using Epoxy Resins
138
Experimental study on reinforced stone beams
139
Experimental study on relation between scour and complex 3D ow field
140
Experimental Study on Relationship Between Mechanical, Seepage Characteristics and 3D Morphology Parameters of Marble Joint
141
Experimental Study on Relationship of Applied Power And Feeding Rate on Production of Polyurethane Nanofibre
142
Experimental study on repair of fatigue cracks at welded web gusset joint using CFRP strips
143
Experimental study on repairing of nude mice skin defects with composite skin consisting of xenogeneic dermis and epidermal stem cells and hair follicle dermal papilla cells
144
Experimental Study on Restoration of Polluted Groundwater from in Situ Leaching Uranium Mining with Sulfate Reducing Bacteria and ZVI-SRB
145
Experimental study on rice husk combustion in a circulating fluidized bed
146
Experimental study on rice husk combustion in a vortexing fluidized-bed with flue gas recirculation (FGR)
147
Experimental study on roll-bond collector/evaporator with optimized-channel used in direct expansion solar assisted heat pump water heating system
148
Experimental study on roughness effects on turbulent boundary layer flow over a two-dimensional steep hill
149
Experimental study on saturated flow boiling heat transfer of R170/R290 mixtures in a horizontal tube
150
Experimental study on sawdust air gasification in an entrained-flow reactor
151
Experimental study on scaling of RC beams under close-in blast loading
152
Experimental study on scaling the explosion resistance of a one-way square reinforced concrete slab under a close-in blast loading
153
Experimental Study on Seakeeping Performance of a Catamaran with Asymmetric Demi-Hulls
154
Experimental study on seawater-pipeline internal corrosion monitoring system
155
Experimental study on seismic behavior of RC frames strengthened with CFRP sheets
156
Experimental Study on Seismic Performance of Reinforced Concrete Frame Columns Supported with Post-build Wing Walls
157
Experimental study on seismic strengthening of RC columns with wrapped CFRP sheets
158
Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates
159
Experimental study on self-excitations in nitrogen-diluted laminar lifted butane flames
160
Experimental study on self-healing of crack in clay seepage barrier
161
Experimental study on separation performance of nanofiltration membranes for bicarbonate salts solution Original Research Article
162
Experimental study on settlement and punching behavior of full-scale RC and SFRC precast tunnel lining segments
163
EXPERIMENTAL STUDY ON SEVERAL LEFT-HANDED MATAMATERIALS
164
Experimental Study on Shear Behaviour of High Strength Reinforced Recycled Concrete Beam
165
Experimental study on shear fatigue behavior and stiffness performance of Warm Mix Asphalt by adding synthetic wax
166
Experimental study on shear fracture of rock with cylindrical specimens
167
Experimental study on shear properties of porous metal fiber sintered sheet
168
Experimental study on shear strength of beam-and-block floors
169
Experimental Study on Shear Strength of High-Strength Concrete Beams
170
EXPERIMENTAL STUDY ON SHEAR STRENGTH OF HOLLOW CYLINDRICAL SPUN CAST CONCRETE ELEMENTS; LOCAL BEHAVIOUR
171
Experimental study on SI engine fuelled with butanol–gasoline blend and H2O addition
172
Experimental study on side-reaction occurrence condition in the iodine–sulfur thermochemical hydrogen production process
173
Experimental study on silicate-melt inclusions in clinopyroxene phenocrysts from Roccamonfina lavas (Italy)
174
Experimental study on silicon micro-heat pipe arrays
175
Experimental study on simulated molten jet-coolant interactions Original Research Article
176
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load
177
Experimental study on single-phase heat transfer of natural circulation in circular pipe under rolling motion condition
178
Experimental Study on Slug Flow Characteristics and its Suppression by Microbubbles in Gas-Liquid Mixture Pipeline
179
EXPERIMENTAL STUDY ON SMALL CYCLONES OPERATING AT HIGH FLOWRATES
180
Experimental study on smoke movement leading to glass damages in double-skinned façade
181
Experimental study on solar assisted heat pump system for heat supply
182
Experimental study on sound and damaged mortar: Variation of ultrasonic parameters with porosity
183
Experimental study on spatial uniformity of H− ion beam in a large negative ion source
184
Experimental study on split air conditioner with new hybrid equipment of energy storage and water heater all year round
185
Experimental study on spray break-up and atomization processes from GDI injector using high injection pressure up to 30 MPa
186
Experimental study on spray combustion characteristics of gasoline–diesel blended fuel in a controllable active thermo-atmosphere
187
Experimental study on spreading and evaporation of inkjet printed pico-liter droplet on a heated substrate
188
Experimental study on stability of an MR fluid damper-rotor-journal bearing system
189
Experimental study on stability of different solid contact arrangements of ion-selective electrodes
190
Experimental study on stable steam condensation in a quenching tank
191
Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete
192
Experimental study on static and fatigue strength of loop joints
193
Experimental study on static and impact strength of sintered agglomerates
194
Experimental study on static characteristics of the bridge deck section under simultaneous actions of wind and rain
195
Experimental study on static flash evaporation of aqueous NaCl solution
196
Experimental study on static flash evaporation of aqueous NaCl solution at different flash speed: Heat transfer characteristics
197
Experimental study on static/circulatory flash evaporation
198
Experimental study on steel tubular columns in-filled with plain and steel fiber reinforced concrete
199
Experimental study on steel-concrete composite beams curved in plan
200
Experimental study on stepless capacity regulation for reciprocating compressor based on novel rotary control valve
201
Experimental study on strength and deformation of plain concrete under triaxial compression after freeze-thaw cycles
202
Experimental study on strength and ductility of carbonated concrete elements
203
Experimental Study on Structural Degradation of CFRP Strengthened RC Beams Subjected to Weak Interfaces
204
Experimental study on subsea pipeline bedding condition assessment using wavelet packet transform
205
Experimental study on surface integrity in end milling of Hastelloy C-2000 superalloy
206
Experimental Study on Surface Integrity of Ti6Al4V by Broaching
207
Experimental study on surface pressure and flow structure around a triangular prism located behind a porous fence
208
Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design
209
Experimental Study on Surface Roughness and Flatness in Lapping of AISI 52100 Steel
210
Experimental study on surface wave propagating through a grease–pancake ice mixture
211
Experimental study on symmetry breaking in a swirling free-surface cylinder flow influenced by viscoelasticity
212
Experimental study on syngas production by co-gasification of coal and biomass in a fluidized bed
213
Experimental study on temperatures and energy partition at the diamond–granite interface in grinding
214
Experimental Study on TGA, XRD and SEM Analysis of Concrete with Ultra-fine Slag (TECHNICAL NOTE)
215
Experimental study on the added mass and damping of a disk submerged in a partially fluid-filled tank with small radial confinement
216
Experimental study on the adiabatic absorption of water vapor into LiBr–H2O solutions
217
Experimental Study on the Adsorption of Water and Ethanol by Cornmeal for Ethanol Dehydration
218
Experimental Study on the Aeroacoustic Behavior of a Forward-Curved Blades Centrifugal Fan
219
Experimental Study on the Aeroacoustic Behavior of a Forward-Curved Blades Centrifugal Fan
220
Experimental study on the aerodynamic forces on railway vehicles in presence of turbulence
221
Experimental Study on the Aerodynamic Performance of Swept Curved Blade
222
Experimental study on the air velocity effect on the efficiency and fresh water production in a forced convective double slope solar still
223
Experimental study on the air/water counter-current flow limitation in a model of the hot leg of a pressurized water reactor Original Research Article
224
Experimental study on the anisotropic behavior of textured NiTi pseudoelastic shape memory alloys
225
Experimental study on the anisotropic behavior of textured NiTi pseudoelastic shape memory alloys
226
Experimental study on the anti-fouling effects of Ni–Cu–P-PTFE deposit surface of heat exchangers
227
Experimental study on the as-cast solidification of the Si-rich alloys of the Nb–Si–Mo ternary system
228
Experimental study on the auto-ignition and combustion characteristics in the homogeneous charge compression ignition (HCCI) combustion operation with ethanol/n-heptane blend fuels by port injection
229
Experimental study on the bandgap narrowings of TiO2 films calcined under N2 or NH3 atmosphere
230
Experimental Study on the Behavior of TiN and Ti2O3 Inclusionsin Contact with CaO-Al2O3-SiO2-MgO Slags
231
Experimental study on the behaviors and shape changes of premixed hydrogen–air flames propagating in horizontal duct
232
Experimental Study on the Bending Behavior of 3D Woven Glass Fiber Sandwich Composite Panels
233
Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature
234
Experimental study on the bioaccumulation of oxytetracycline and oxolinic acid by the blue mussel (Mytilus edulis). An evaluation of its ability to bio-monitor antibiotics in the marine environment
235
Experimental Study on the Bond Strength of Concrete-Steel Composite Columns
236
Experimental study on the characteristic stages of premixed hydrogen-air flame propagation in a horizontal rectangular closed duct
237
Experimental study on the characteristics of heat transfer and flow resistance in turbulent pipe flows of viscoelastic-fluid-based Cu nanofluid
238
Experimental study on the characteristics of pad fluttering in a tilting pad journal bearing
239
Experimental study on the characteristics of thermal conductivity and shear viscosity of viscoelastic-fluid-based nanofluids containing multiwalled carbon nanotubes
240
Experimental study on the characterization of worn surface topography with characteristic roughness parameter
241
Experimental study on the coal tar hydrocracking process in supercritical solvents
242
Experimental study on the collection efficiency of membrane filters
243
Experimental study on the combinative action of zinc chloride and triethanolamine on improving photosensitivity in red-sensitized dichromated gelatin
244
Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer composites
245
Experimental study on the condensation of supersonic steam jet submerged in quiescent subcooled water: Steam plume shape and heat transfer
246
Experimental study on the confined 3D laminar flow past a square prism with a high blockage ratio
247
Experimental study on the constitutive relation of austenitic stainless steel S31608 under monotonic and cyclic loading
248
Experimental study on the contact angle formation of solidified iron–chromium droplets onto yttria ceramic substrates for the yttria/ferrous alloy system with variable chromium content
249
Experimental study on the contact patch pressure and sinkage of a lightweight vehicle on sand
250
Experimental study on the convective heat transfer coefficient of early-age concrete
251
Experimental study on the creep behavior of frozen clay with thermal gradient
252
Experimental study on the cyclic deformation and plastic flow of U71Mn rail steel
253
Experimental study on the cyclic deformation and plastic flow of U71Mn rail steel
254
Experimental study on the cyclic deformation and plastic flow of U71Mn rail steel
255
Experimental study on the deformation of erythrocytes under optically trapping and stretching
256
Experimental study on the design of orifice pulse tube refrigerator
257
Experimental study on the determination of strength of masonry walls
258
Experimental study on the development of collapse of overhanging layers of gully in Yuanmou Valley, China
259
Experimental study on the development of compressive strength of early concrete age using calcium-based hardening accelerator and high early strength cement
260
Experimental study on the direct liquefaction of Cunninghamia lanceolata in water
261
Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES)
262
Experimental Study on the Discharge Coefficient of Bi-Swirl Coaxial Injectors
263
Experimental Study on the Discharge Coefficient of Triangular Piano Key Side Weirs with Different Geometries
264
Experimental study on the double-evaporator thermosiphon for cooling HTS (high temperature superconductor) system Original Research Article
265
Experimental study on the dryout heat flux of falling liquid film
266
Experimental study on the dynamic behavior of TiNi cantilever beams with rectangular cross-section under transversal impact
267
Experimental study on the dynamic characteristics of adsorption heat pumps driven by intermittent heat source at heating mode
268
Experimental study on the dynamic characteristics of kW-scale molten carbonate fuel cell systems
269
Experimental Study on the Dynamic Performance of a New High-Speed Spindle Supported by Water-Lubricated Hybrid Bearings
270
Experimental study on the dynamic response of gravity-designed reinforced concrete connections
271
Experimental study on the dynamic tensile behavior of a poly-crystal pure titanium at elevated temperatures
272
Experimental Study on the Dynamics of a Moving Droplet Impacting a Sessile Droplet
273
Experimental study on the effect of applying a crossed electric field on the breakdown behavior of low vacuum
274
Experimental Study on the Effect of Attachments on the Vortex-Induced Vibration of a Centrally Slotted Box Deck
275
Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders
276
Experimental study on the effect of coal to liquid on combustion and emission of heavy-duty diesel engine with exhaust gas recirculation
277
Experimental study on the effect of combustor configuration on the performance of dual-mode combustor
278
Experimental Study on the Effect of Crumb Rubber on Shear Strength of Sandy Soil
279
Experimental study on the effect of different CO2 concentrations on soot and gas products from ethylene thermal decomposition
280
Experimental study on the effect of drag reducing polymer on flow patterns and drag reduction in a horizontal oil–water flow
281
Experimental Study on the Effect of Eccentric Loads on the Bearing Capacity of Strip Footing Located on the Inclined Multi-Layer Soil Mass with a Weak Soil Layer
282
Experimental study on the effect of frost heave prevention using soilbags
283
Experimental study on the effect of frost parameters on domestic refrigerator finned tube evaporator coils
284
Experimental Study on the Effect of Glass and Carbon Fibers on Physical and Micro-Structure Behavior of Asphalt
285
Experimental study on the effect of glass transition on moisture profiles and stress-crack formation during continuous and time-varying drying of maize kernels
286
Experimental study on the effect of heat transfer enhancement devices in flat-plate solar collectors
287
Experimental study on the effect of high power ultrasonic on the mechanical properties of concrete
288
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube
289
Experimental Study on the Effect of Moisture Content on Hysteretic Behavior of Reinforced Concrete Columns
290
Experimental study on the effect of N2, CO2, and steam dilution on the combustion performance of H2 and CO synthetic gas in an industrial gas turbine
291
Experimental study on the effect of pulsating inflow to an enclosure for improved mixing
292
Experimental study on the effect of pyrolysis pressure, peak temperature, and particle size on the potential stability of vine shoots-derived biochar
293
Experimental study on the effect of rock pressure on sandstone permeability
294
Experimental Study on the Effect of Single Spur-dike with Slope Sides on Local Scour Pattern
295
Experimental Study on the Effect of Tabs with Asymmetric Projections on the Mixing Characteristics of Subsonic Jets
296
Experimental study on the effect of wavelength in the laser cleaning of silver threads
297
Experimental Study on the Effective Thermal Conductivity and Thermal Diffusivity of Nanofluids
298
Experimental study on the effective width of flat slab structures under dynamic seismic loading
299
Experimental study on the effectiveness of fiber sheet reinforcement on the explosive-resistant performance of concrete plates
300
Experimental study on the effects of acoustic streaming of high frequency ultrasonic waves on convective heat transfer: Effects of transducer position and wave interference
301
Experimental study on the effects of crustal temperature and composition on assimilation with fractional crystallization at the floor of magma chambers
302
Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on AL2024T3 Joint Strength
303
Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine
304
Experimental study on the effects of HP and LP EGR in an automotive turbocharged diesel engine
305
Experimental study on the effects of operating parameters on the performance of a transpiring-wall supercritical water oxidation reactor Original Research Article
306
Experimental Study on the Effects of Recycled Concrete Powder on Properties of Self-Compacting Concrete
307
Experimental study on the effects of surface treatment reagents on tensile properties of Banana fiber reinforced polyester composites
308
Experimental study on the effects of the boundary conditions on the deformations of composite plates
309
Experimental study on the effects of the operation conditions on the performance of a chemisorption air conditioner powered by low grade heat
310
Experimental study on the effects of visualized functionally abstracted information on process control tasks
311
Experimental study on the effects of visualized functionally abstracted information on process control tasks
312
Experimental Study on the Effects of Water-in-oil Emulsions to Wall Shear Stress in the Pipeline Flow
313
Experimental study on the elimination of over-plating problems in industrial manufacturing of large-area acidic-textured laser-doped multi-crystalline solar cells
314
Experimental study on the enhancement of heat transfer between water interfaced with higher thermal conductivity liquid
315
Experimental study on the evaporative heat transfer and pressure drop of CO2 flowing upward in vertical smooth and micro-fin tubes with the diameter of 5 mm
316
Experimental Study on the Factors Affecting Hexavalent Chromium Bioreduction by Bacillus cereus
317
Experimental study on the failure mechanism of recycled concrete
318
Experimental study on the fatigue behaviour of welded tubular K-joints for bridges
319
Experimental study on the flexural behaviour of multi-span transparent glass–GFRP composite beams
320
Experimental study on the flow and heat transfer characteristics of a tetra-n-butyl ammonium bromide hydrate slurry (first report: Flow characteristics)
321
Experimental study on the flow and heat transfer characteristics of a tetra-n-butyl ammonium bromide hydrate slurry (second report: Heat transfer characteristics)
322
Experimental Study on the Flow Pattern of Double-hemisphere Rough Elements with Different Streamwise Spacing
323
Experimental study on the forced convective flow in a channel with heated blocks in tandem
324
Experimental study on the formation and growth of electroless nickel–boron coatings from borohydride-reduced bath on mild steel
325
Experimental study on the formation of higher fluorocarbons from CF4 by a tip–tip electrical arc discharge at very high pressure
326
Experimental Study on the Friction Drag Reduction of Superhydrophobic Surfaces in Closed Channel Flow
327
EXPERIMENTAL STUDY ON THE GAS-LIQUID FLOW IN THE MEMBRANE MICROPORE AERATION BIOREACTOR
328
Experimental study on the gas–solid suspension flow in a square cyclone separator
329
Experimental study on the globe thermometer behaviour in conditions of asymmetry of the radiant temperature
330
Experimental study on the grinding rate constant of solid materials in a ball mill
331
Experimental study on the hazards of the jet diffusion flame of liquefied dimethyl ether
332
Experimental study on the heat and mass transfer characteristics in a refrigerated truck
333
Experimental study on the heat recovery characteristics of a new-type flat micro-heat pipe array heat exchanger using nanofluid
334
Experimental study on the heat transfer at the heat exchanger of the thermoacoustic refrigerating system
335
Experimental study on the heat transfer characteristics during the pressure transients under supercritical pressures
336
Experimental study on the heat transfer characteristics of nanorefrigerants in an internal thread copper tube
337
Experimental study on the heat transfer enhancement of MWNT-water nanofluid in a shell and tube heat exchanger
338
Experimental study on the heat transfer under impinging elliptic jet array along a film hole surface using liquid crystal thermograph
339
Experimental study on the hung-up regime in hopper–standpipe systems for Geldart-A powders
340
Experimental study on the hung-up regime of a hopper-standpipe system for a Geldart-D powder
341
Experimental study on the hydrate dissociation in porous media by five-spot thermal huff and puff method
342
Experimental study on the hydrodynamic effects of gas permeation through horizontal membrane tubes in fluidized beds
343
Experimental study on the hydrogen charge and discharge rates of metal hydride tanks using heat pipes to enhance heat transfer
344
Experimental study on the identification of dynamic axle loads of moving vehicles from the bending moments of bridges
345
Experimental study on the impact fragmentation of core–mantle bodies: Implications for collisional disruption of rocky planetesimals with sintered core covered with porous mantle
346
Experimental study on the impact of dinoflagellate Alexandrium species on populations of the rotifer Brachionus plicatilis
347
Experimental study on the improvement of CO2 air conditioning system performance using an ejector
348
Experimental study on the influence of alkaline earth promoters on neodymium oxide performance in the oxidative coupling of methane Original Research Article
349
Experimental study on the influence of bed material on the scaling of solids circulation patterns in 3D bubbling gas–solid fluidized beds of glass and polyethylene using positron emission particle tracking
350
Experimental study on the influence of overload induced residual stress field on fatigue crack growth in aluminium alloy
351
Experimental study on the influence of the thermal input on the reaction zone under flameless oxidation conditions
352
Experimental study on the influence of water temperature on the otolith formation of the marbled flounder (Pseudopleuronectes yokohamae)
353
Experimental Study on the Influencing Factors of Treatment of Landfill Sludge Using Vacuum Preloading with the Fenton Reagent
354
Experimental study on the instantaneous fluid force acting on two circular cylinders closely arranged in tandem
355
Experimental study on the interaction between large scale vortices and particles in liquid–solid two-phase flow
356
Experimental study on the interaction of two two-dimensional circular holes placed in a uniform viscous flow in a porous medium
357
Experimental study on the kinetics of water vapor sorption on selective water sorbents, silica gel and alumina under typical operating conditions of sorption heat pumps
358
Experimental study on the laminar flame speed of hydrogen/carbon monoxide/air mixtures
359
Experimental study on the local convective coefficient distribution on a pipe surface with inclined fins
360
Experimental study on the loop heat pipe with a planar bifacial wick structure
361
Experimental study on the low temperature regenerator packed with rectification meshes Original Research Article
362
Experimental study on the low velocity impact responses of all-composite pyramidal truss core sandwich panel after high temperature exposure
363
Experimental study on the machining of a shaped hole in Ni-based super-heat-resistant alloy
364
Experimental study on the magnetic convection in a vertical cylinder
365
Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals
366
Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature
367
Experimental study on the mechanical properties of clayey soil under di erent freezing apparatustemperatures and freeze-thaw cycles
368
Experimental study on the mechanism of BaTiO3-based PTC–CO gas sensor
369
Experimental study on the microstructure and nanomechanical properties of the wing membrane of dragonfly
370
Experimental study on the milling of a Ti Beta 21S
371
Experimental study on the milling of thin parts of titanium alloy (TC4)
372
Experimental study on the natural circulation of a passive residual heat removal system for an integral reactor following a safety related event
373
Experimental study on the noise reduction of an industrial forward-curved blades centrifugal fan
374
Experimental study on the nozzle effect of the pulse cleaning for the ceramic filter candle
375
Experimental study on the number density distribution function in turbulent bubbly flows with coalescence and break-up
376
Experimental study on the onset of local dryout in an evaporating falling film on horizontal plain tubes
377
Experimental study on the operating characteristics of a capillary pumped loop with a flat evaporator
378
Experimental study on the operating characteristics of a flat bifacial evaporator loop heat pipe
379
Experimental study on the operating characteristics of a novel low-concentrating solar photovoltaic/thermal integrated heat pump water heating system
380
Experimental study on the optimum flow rate and pressure for selective cerebral perfusion
381
Experimental study on the oxidation of nuclear graphite and development of an oxidation model
382
Experimental study on the packing of uniform spheres under three-dimensional vibration
383
Experimental study on the pathogenicity of avian influenza A/Ch/It/5093/99(H7N1) virus in chicken
384
Experimental study on the pathogenicity of avian influenza A/Ch/It/5093/99(H7N1) virus in chicken
385
Experimental study on the performance of a heat pump system with refrigerant mixtures’ composition change
386
Experimental study on the performance of a mechanical cooling tower fitted with different types of water distribution systems and drift eliminators
387
Experimental study on the performance of a novel fin-tube air heat exchanger with punched longitudinal vortex generator
388
Experimental study on the performance of a novel structure for two-phase flow distribution in parallel vertical channels
389
Experimental study on the performance of a room temperature magnetic refrigerator using permanent magnets
390
Experimental study on the performance of a simultaneous heating and cooling multi-heat pump with the variation of operation mode
391
Experimental study on the performance of a solar driven steam jet ejector chiller
392
Experimental study on the performance of a THGEM detector for X-rays
393
Experimental study on the performance of an aircraft environmental control system
394
Experimental study on the performance of an inverter heat pump with a bypass orifice
395
Experimental study on the performance of CO2 residential air-conditioning system with an internal heat exchanger
396
Experimental study on the performance of double-effect and double-way thermochemical sorption refrigeration cycle
397
Experimental study on the performance of hydrogen production from miniature methanol–steam reformer integrated with Swiss-roll type combustor for PEMFC
398
Experimental study on the performance of mechanical cooling tower with two types of film packing
399
Experimental study on the performance of PEM fuel cells with interdigitated flow channels
400
Experimental study on the performance of recooling cycle of hydrocarbon fueled scramjet engine
401
Experimental study on the performance of solar Rankine system using supercritical CO2
402
Experimental study on the performance of superfinish hard turned surfaces in rolling contact
403
Experimental study on the performance of the thermoacoustic refrigerating system
404
Experimental study on the performance of woven fabric rubber composite armor subjected to shaped charge jet impact
405
Experimental study on the phase change behavior of phase change material confined in pores
406
Experimental study on the phase equilibria of the Ag–Ti system
407
Experimental Study on the Physical and Rheological Properties of Bitumen Modified with Different Nano Materials (Nano SiO2 & Nano TiO2)
408
Experimental study on the plastic deformation and densification characteristics of some sintered and heat treated low alloy powder metallurgy steels
409
Experimental study on the pool boiling CHF enhancement using magnetite-water nanofluids
410
Experimental study on the pore structure characteristics of the Upper Ordovician Wufeng Formation shale in the southwest portion of the Sichuan Basin, China
411
EXPERIMENTAL STUDY ON THE POTENTIAL USE OF PUMICE BRECCIA AS COARSE AGGREGATE IN STRUCTURAL LIGHTWEIGHT CONCRETE
412
Experimental study on the PRE-X vehicle focusing on the transitional shock-wave/boundary-layer interactions
413
Experimental Study on the Production of CO-NO-HC Emissions in the Radial Swirling Flow Combustion System
414
Experimental study on the production of light nuclei in spallation–fission reactions and projectile fragmentation of 238U Original Research Article
415
Experimental study on the pseudobinary H2O + NaAlSi3O8 at 600–800 °C and 0.3–2.4 GPa
416
Experimental study on the purification of HIx phase in the iodine–sulfur thermochemical hydrogen production process
417
Experimental study on the reaction between nuclear graphite IG-110 and carbon dioxide
418
Experimental study on the removal of PAHs using in-duct activated carbon injection
419
Experimental study on the removal of phenol from wastewater using Ni-doped ZIF-8 adsorbent; Isotherm models and operating conditions
420
Experimental study on the rheological properties of polycrystalline solid nitrogen and methane: Implications for tectonic processes on Triton
421
Experimental study on the rheology of CO2 viscoelastic surfactant foam fracturing fluid
422
Experimental study on the role of clays as sealing materials in the geological storage of carbon dioxide
423
Experimental study on the role of osteoclasts and free radicals in the mandibular invasion of VX2 carcinoma in Japanese white rabbits
424
Experimental study on the safety of a new connecting device
425
Experimental study on the separation of CO2 from flue gas using hollow fiber membrane contactors without wetting
426
Experimental study on the shape–velocity relationship of an ellipsoidal bubble in inorganic salt solutions
427
Experimental Study on the Shearing Behavior of Saturated Silty Soils Based on Ring-Shear Tests
428
Experimental study on the size distribution characteristics of spray droplets of DME/diesel blended fuels
429
Experimental study on the solid velocity in horizontal dilute phase pneumatic conveying of fine powders
430
Experimental study on the solubility of natural gas components in water with or without hydrate inhibitor
431
Experimental Study on the Solvation Behavior in Aqueous Choline Chloride-based Deep Eutectic Solutions by Solvatochromic Dyes
432
Experimental study on the stability of asphalt emulsion for CA mortar by laser diffraction technique
433
Experimental Study on the Stability of Concrete Block Revetment for High Waves Propagating over Submerged Geotube Breakwater
434
Experimental study on the stability of the foamy oil in developing heavy oil reservoirs
435
Experimental study on the stitching reinforcement of composite laminates with a circular hole
436
Experimental study on the strength and ductility of steel tubular columns filled with steel-reinforced concrete
437
Experimental study on the structural behavior of concrete dapped-end beams
438
Experimental study on the structure and vibrational, thermal and dielectric properties of bis(2-methylanilinium) selenate accomplished with DFT calculation
439
Experimental study on the structure of opposed flow gaseous diffusion flames doped with n-decane
440
Experimental study on the surface characteristics of polymer melts
441
Experimental Study on the Surface Modification by Electrical Discharge Process
442
Experimental study on the surface stress measurement with Rayleigh wave detection technique
443
Experimental study on the swelling behaviour of bentonite/claystone mixture
444
Experimental study on the tensile strength of a sintered porous metal composite
445
Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy
446
Experimental Study on the Thermal Conductivity and Viscosity of a Transformer Oil-based Nanofluid Containing ZnO Nanoparticles
447
Experimental study on the thermal decomposition of 2H-heptafluoropropane
448
Experimental study on the thermal decomposition of 2H-heptafluoropropane
449
Experimental study on the thermal oxidation of 1,3-hexachlorobutadiene at 500 – 1100° C
450
Experimental study on the thermal oxidation of 2-chlorophenol in air over the temperature range 450–900 °C
451
Experimental study on the thermal oxidation of chlorobenzene at 575–825°C
452
Experimental study on the thermal performance and efficiency of a copper made thermosyphon heat pipe charged with alumina–glycol based nanofluids
453
Experimental study on the thermal performance of a mechanical cooling tower with different drift eliminators
454
Experimental study on the thermal performance of mechanical cooling tower with rotational splash type packing
455
Experimental study on the thermal performance of vertical closed-loop oscillating heat pipes and correlation modeling
456
Experimental study on the thermal properties of the phase change material wall formed by different methods
457
Experimental study on the thermal storage performance and preparation of paraffin mixtures used in the phase change wall
458
Experimental study on the thermodynamics of the Cu–Sb–Sn liquid alloys
459
Experimental study on the thermodynamics of the Cu–Sb–Sn liquid alloys
460
Experimental study on the transition between stratified and non-stratified horizontal oil–water flow
461
Experimental Study on the Transmission of Measurements by Tolerance in SCADA Systems
462
Experimental study on the treatment of intracerebral glioma xenograft with human cytokine-induced killer cells
463
Experimental study on the turbulent boundary layer flow over riblets surface
464
Experimental study on the ultimate bending resistance of steel tub girders with top lateral bracing
465
Experimental study on the ultrasonic nonlinear damage characteristics of expansive soil during constant amplitude dry-wet cycles
466
Experimental study on the unconfined compression of a thawing soil
467
Experimental study on the unintentional abiotic methylation of inorganic mercury during analysis: Part 1: Localisation of the compounds effecting the abiotic mercury methylation
468
Experimental study on the unintentional abiotic methylation of inorganic mercury during analysis: Part 2: Controlled laboratory experiments to elucidate the mechanism and critical discussion of the species specific isotope addition correction method
469
Experimental study on the unique stability mechanism via miniaturization of jet diffusion flames (microflame) by utilizing preheated air system
470
Experimental study on the unsteady laminar heat transfer downstream of a backwards facing step
471
EXPERIMENTAL STUDY ON THE UPSTREAM WATER LEVEL RISE AND DOWNSTREAM SCOUR LENGTH OF A SUBMERGED DAM
472
Experimental Study on the Use of Cobalt-60 Irradiation in the Inactivation of Giardia lamblia Cyst
473
Experimental study on the vertical deformation of sand caused by cyclic withdrawal and recharging of groundwater
474
EXPERIMENTAL STUDY ON THE VORTEX-INDUCED VIBRATION OF TOWED PIPES
475
Experimental study on the wake behind tapered circular cylinders
476
Experimental study on the water impact of a symmetrical wedge
477
Experimental Study on the Wear of Liner in Tumbling Mill under Dry and Wet Conditions
478
Experimental study on the whip elimination of rotor-bearing systems with electromagnetic exciters
479
Experimental study on the wind-induced vibration of a dry inclined cable—Part I: Phenomena
480
Experimental study on the wind-induced vibration of a dry inclined cable—Part II: Proposed mechanisms
481
Experimental study on thermal and mechanical behavior of polypropylene, talc/polypropylene and polypropylene/clay nanocomposites
482
Experimental study on thermal characteristics of ammonia flow boiling in a plate evaporator at low mass flux
483
Experimental study on thermal characteristics of suspended platinum nanofilm sensors
484
Experimental study on thermal comfort of sleeping people at different air temperatures
485
Experimental study on thermal conductivity of polyurethane resin filled with modified nanoparticles
486
Experimental study on thermal efficiency and emission characteristics of a lean burn hydrogen enriched natural gas engine
487
Experimental study on thermal performance of a solar chimney combined with PCM
488
Experimental study on thermal–hydraulic performance of a wavy fin-and-flat tube aluminum heat exchanger
489
Experimental study on thermally actuated pressure wave generator for space cryocooler Original Research Article
490
Experimental Study on Thermo, Water Quality and Economic Analysis of Hemispherical Solar Still Using Different Basin Materials with and without Internal Reflector
491
Experimental study on thermocapillary convection
492
Experimental study on thermo-chemical phenomena during interaction of limestone concrete with liquid sodium under inert atmosphere
493
Experimental study on thermo-mechanical properties of Polymer Modified Mortar
494
Experimental study on thermophoretic deposition of soot particles in laminar diffusion flames along a solid wall in microgravity
495
Experimental study on thermophysical properties of nanofluids as phase-change material (PCM) in low temperature cool storage
496
Experimental study on thermosyphon solar water heater in Bahrain
497
Experimental Study on Three-Dimensional Bubble Rising Behaviours by Virtual Stereo Vision
498
Experimental study on three-dimensional temperature fluctuation caused by coaxial-jet flows
499
Experimental Study on Time Evolution of Shock Wave and Turbulent Boundary Layer Interactions
500
Experimental study on time evolution of Marangoni flow instability in molten silicon bridge
501
Experimental study on titanium heat exchanger used in a gas fired water heater for latent heat recovery
502
Experimental study on transition of flow pattern and phase distribution in upward air–water two-phase flow along a large vertical pipe
503
Experimental study on transmission of an overdriven detonation wave from propane/oxygen to propane/air
504
Experimental study on treatment of electroplating wastewater by nanofiltration
505
Experimental study on turbulent features in the negative transport region of asymmetric plane channel flow
506
Experimental study on turbulent mixing process in cross-flow type T-junction
507
EXPERIMENTAL STUDY ON TURNING WITH SELF-PROPELLED ROTARY CUTTING TOOL
508
Experimental study on two-phase flow and pressure drop in millimeter-size channels
509
Experimental study on two-phase natural circulation and flow termination in a loop Original Research Article
510
Experimental study on two-photon oscillator strength of hydrogenic yellow excitons in Cu2O
511
Experimental study on two-stage catalytic hydroprocessing of middle-temperature coal tar to clean liquid fuels
512
Experimental study on two-stage compression refrigeration/heat pump system with dual-cylinder rolling piston compressor
513
Experimental study on ultimate strength of CK20 steel cylindrical panels subjected to compressive axial load
514
Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools
515
Experimental Study on Uniaxial and Multiaxial Strain Cyclic Characteristics and Ratcheting of 316L Stainless Steel
516
Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures Original Research Article
517
Experimental study on unsteady wake impacting effect in axial-flow compressors
518
Experimental study on urban refuse/magnesium oxychloride cement compound floor tile
519
Experimental study on using ionic liquids to upgrade heavy oil
520
Experimental Study on Using Uniform Tuned Liquid Column Damper for Structural Control of Buildings Resting on Loose Soil
521
Experimental study on ventilation characteristics of a concrete-sphere layer and a crushed-rock layer
522
Experimental study on vertical vapor absorption into LiBr solution with and without additive
523
Experimental study on vibration and damping of curved panel treated with constrained viscoelastic layer
524
Experimental study on vibrations of a nonwoven fabric cylindrical filter
525
Experimental study on viscosity reduction of Iranian heavy export crude oil by using imidazolium based ionic liquids supported on ZIF-8 organic framework
526
Experimental study on visibility of exit signs in buildings
527
Experimental Study on Wake Characteristics of Secondary Grooved Cylinders with Different Depths
528
Experimental Study on Warm Incremental Tube Forming of AA6063 Aluminum Tubes
529
Experimental Study on Wastewater Application for Cement Mixing in Concrete
530
Experimental study on water–rock interactions during CO2 flooding in the Tensleep Formation, Wyoming, USA
531
Experimental study on water-wing characteristics induced by piers in ood drainage culverts
532
Experimental Study on Wave Transmission and Reflection at Impermeable Submerged Breakwaters
533
Experimental study on wear and friction of work roll material with 4% Cr and added Ti in cold rolling
534
Experimental study on whirling, flying and tilting motions of a 3.5 in. FDB spindle system
535
Experimental Study on Wind Load and Wind-Induced Interference Effect of Three High-Rise Buildings
536
Experimental study on wind loading on a complicated group-tower
537
Experimental study on wind loading on a complicated group-tower
538
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics
539
Experimental study on zeta potential and streaming potential of advanced ceramic powders
540
Experimental study on z-pin bridging law by pullout test
541
Experimental study to accumulate, accelerate and focus a massive plasma beam onto a target
542
Experimental study to control the insertion resistance of internal medical instrument using magnetic field oscillation
543
Experimental Study to Evaluate Antisymmetric Reinforced Concrete Deep Beams with Openings under Concentrated Loading Using Strut and Tie Model
544
Experimental study to evaluate the pathogenicity of Streptococcus iniae in Guppy (Poecilia reticulata)
545
Experimental Study to Investigate Effect of Pitch Ratio and Number of Blades on Hydrodynamic Performance of Surface Piercing Propellers
546
Experimental study to investigate mechanical properties of new material polyurethane–cement composite (PUC)
547
Experimental study to investigate the effects of fibre and protein on appetite feelings and food intake in women
548
Experimental study to investigate the impact of a patented fibre complex containing CM3 alginate (Biogenate complexTM; APPEsatTM) on food intake and appetite ratings in women
549
Experimental study to investigate the impact of a patented herb extract formulation Yerbe Maté, Guarana and Damiana (YGD; Zotrim®) on food intake and appetite ratings in women
550
Experimental Study to Optimize Shrinkage Behavior of Semi-Crystalline and Amorphous Thermoplastics
551
Experimental study to reduce the distribution-transformers stray losses using electromagnetic shields
552
Experimental study with a Digital Image Correlation (DIC) method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium
553
Experimental study, on strain rate sensitivity of ductile porous irons
554
Experimental study, via current–potential curves, of the anodic behavior of Alloy C-276 and T60 titanium in chlorinated and oxygenated aqueous media under sub- to supercritical conditions
555
Experimental studying and stochastic modeling of residence time distribution in jet-entrained gasifier
556
Experimental studying of a small combined cold and power system driven by a micro gas turbine
557
Experimental studying of buckling of stringer cylindrical shells under axial compression
558
Experimental studying of pore morphology and wettability effects on microscopic and macroscopic displacement efficiency of polymer flooding
559
Experimental Studying of the Effect of EGR Distribution on the Combustion, Emissions and Perforemance in a Turbocharged DI Diesel Engine
560
Experimental studying the effect of nano particles additives in dieselbiodiesel blends on the emission characteristics of a CI engine
561
Experimental subchronic mycotoxicoses in mice: individual and combined effects of dietary exposure to fumonisins and aflatoxin B1
562
Experimental summary on global observables, hadron spectra and ratios Original Research Article
563
Experimental supplemental vein grafting and hypoperfusion syndrome
564
Experimental support differenciating two proposed chiral recognition models for the resolution of N-(3,5-Dinitrobenzoyl)-α-arylalkylamines on high-performance liquid chromatography chiral stationary phases
565
Experimental support for a model-based prediction of tool wear
566
Experimental surface tensions and derived surface activities of the nitrobenzene-fused tetra-n-butyl ammonium picrate system from 364.1 to 393.1 K over full composition range
567
Experimental survey of temperature, time and cross‑linking agent effects on polydimethylsiloxane composite membranes performances in sulfur removal
568
Experimental survey of the chemical durability of commercial soda-lime-silicate glasses
569
Experimental Survey on Microwave Drying of Porous Media
570
Experimental survey on the combination of radiating infrared and microwave sources for the drying of porous material
571
Experimental Survey Roterdam Demand System By Using Urban Family Of Consumer Costs Data Case Study: Province Of Sistan and Balouchestan, Iran
572
Experimental switching of copper status in laboratory rodents
573
Experimental syntheses of framboids—a review
574
Experimental synthesis and phase relations of phengitic muscovite from 6.5 to 11 GPa in a calcareous metapelite from the Dabie Mountains, China
575
Experimental system for high resolution X-ray transmission radiography
576
Experimental system for high resolution X-ray transmission radiography
577
Experimental system for X-ray magnetic diffraction under extreme conditions Original Research Article
578
Experimental System Identification and Signal Processing of V94.2 Gas Turbine Fuel System
579
Experimental system of cavitation erosion with water-jet
580
Experimental T33-stress formulation of test specimen thickness effect on fracture toughness in the transition temperature region
581
Experimental taphonomy of a decapod crustacean: Long-term data and their implications
582
Experimental technique for launching miniature flying plates using laser pulses
583
Experimental technique to analyse the slurry erosion wear due to turbulenc
584
Experimental technique to determine unsteady flow in natural ventilation stacks at model scale
585
Experimental Techniques Addressing Product Quality Series: Part 3. THE POWER OF TWO… 2K FACTORIAL EXPERIMENTS
586
Experimental Techniques Addressing Product Quality Series: Part 4. PARING-BY-PAIRING … ALIASING AND 2k-p FRACTIONAL FACTORIAL ANOVA
587
Experimental Techniques Addressing Product Quality Series: Part 5. NEW SIGNIFICANCE INDICATORS AID ANOVA
588
Experimental techniques and design in composite materials (ETDCM8)
589
Experimental techniques for determining heat and mass transfer due to condensation of humid air in cooled, open cavities
590
Experimental techniques for fracture instability toughness determination of unidirectional fibre metal laminates
591
Experimental techniques for investigating the surface oxygen formation in the N2O decomposition on Fe-MFI zeolites
592
EXPERIMENTAL TECHNIQUES FOR MEASURING SEWING NEEDLE TEMPERATURE
593
Experimental techniques for quantifying the cake mass, the cake and membrane resistances and the specific cake resistance during crossflow filtration of microbial suspensions
594
Experimental techniques for single cell and single molecule biomechanics
595
Experimental techniques for studying the structure of foams and froths
596
Experimental techniques for the investigation of the electron screening effect for d+d fusion reactions in metallic environments Original Research Article
597
Experimental techniques in natural convection
598
EXPERIMENTAL TECHNIQUES TO UNDERSCORE A CONCRETE VICTORY
599
Experimental Techniques/Scattering
600
Experimental tectonics: from Sir James Hall to the present
601
Experimental temperature measurements for the energy amplifier test
602
Experimental temperature measurements for the energy amplifier test
603
Experimental tensiometric protein adsorption studies
604
Experimental test campaign on an ITER divertor mock-up
605
Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC)
606
Experimental test of a load model in the presence of harmonics
607
Experimental test of a new technique of background suppression in digital mammography
608
Experimental test of a new technique of background suppression in digital mammography
609
Experimental test of a novel multi-surface trough solar concentrator for air heating
610
Experimental Test of a Perturbation Model for Time-Resolved Imaging in Diffusive Media
611
Experimental test of a radiative transfer model of the optical effects of space weathering
612
Experimental test of a supercritical helium heat exchanger dedicated to EUROTRANS 150 kW CW power coupler Review Article
613
Experimental test of blind tip reconstruction for scanning probe microscopy
614
Experimental test of blind tip reconstruction for scanning probe microscopy
615
Experimental test of structural materials activation in the IFMIF neutron spectrum
616
Experimental test of the “zero dead time” count-loss correction method on a digital gamma-ray spectrometer
617
Experimental test of the “zero dead time” count-loss correction method on a digital gamma-ray spectrometer
618
Experimental test of the background rejection, through imaging capability, of a highly segmented AGATA germanium detector
619
Experimental test of the background rejection, through imaging capability, of a highly segmented AGATA germanium detector
620
Experimental test of the Gallavotti–Cohen fluctuation theorem in turbulent flows
621
Experimental test of the hybrid superconducting pixel detector principle
622
Experimental test of the hybrid superconducting pixel detector principle
623
Experimental test of the polarization direction correlation method (PDCO)
624
Experimental test of the polarization direction correlation method (PDCO)
625
Experimental test of the probability density function of true value of Poisson distribution parameter by single observation of number of events
626
Experimental test of the probability density function of true value of Poisson distribution parameter by single observation of number of events
627
Experimental test of the prospect theory value function: A stochastic dominance approach
628
Experimental test of the time stability of the half-life of alpha-decay 214Po nuclei
629
Experimental test of TOYOBO membranes for seawater desalination at Las Palmas, Spain
630
Experimental test on a novel dual fluidised bed biomass gasifier for synthetic fuel production
631
Experimental test on Carbon Crystal Panel system and simulation research on its partial-heating program
632
Experimental test procedures for determination of the optical efficiency factor of a parabolloid concentrator solar cooker
633
Experimental test results for a parallel transmission lines protection scheme using wavelet transform
634
Experimental test to validate the rate equation “dα/dt = kf(α)” used in the kinetic analysis of solid state reactions
635
Experimental test with polymeric membrane for the biogas purification from CO2 and H2S
636
Experimental Testicular Torsion in a Rat Model: Effects of Treatment with Pausinystalia macroceras on Testis Functions
637
Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression
638
Experimental testing and FEM simulation for thermal imprinting of micro/nano glass-optical devices
639
Experimental testing and modeling of a tethered spherical aerostat in an outdoor environment
640
Experimental testing and modelling of an industrial insulated pipeline for deep sea application
641
Experimental testing and numerical modeling of soil-filled concertainer walls
642
Experimental testing and simulation of bolted beam-column connections having thick extended endplates and multiple bolts per row
643
Experimental testing and thermal analysis of ball bearings
644
Experimental testing of a box-type solar cooker using the standard procedure of cooking power
645
Experimental testing of a lab-scale adsorption chiller using a novel selective water sorbent “silica modified by calcium nitrate”
646
Experimental testing of a neural network based digital differential relay for synchronous generators
647
Experimental testing of a new algorithm for measurement of trabecular orientation
648
Experimental testing of a new anti-seismic dissipator energy device based on the plasticity of metals
649
Experimental testing of a shallow solar pond with continuous heat extraction
650
Experimental testing of a stochastic sediment transport model
651
Experimental testing of an annular denuder and filter system to measure gas–particle partitioning of semivolatile bifunctional carbonyls in the atmosphere
652
Experimental testing of an off-road instrumented tire on soft soil
653
Experimental testing of an oil-flooded hermetic scroll compressor
654
Experimental testing of BMI laminates with stress concentrations and the evaluation of SIFT to predict failure
655
Experimental testing of cool colored thin layer asphalt and estimation of its potential to improve the urban microclimate
656
Experimental testing of correlations to calculate the atmospheric ‘‘transparency window’’ emissivity coefficient
657
Experimental testing of flexible recipe control based on a hybrid model
658
Experimental testing of joints for seismic design of lightweight structures. Part 1. Screwed joints in straps
659
Experimental testing of joints for seismic design of lightweight structures. Part 2: Bolted joints in straps
660
Experimental testing of joints for seismic design of lightweight structures. Part 3: Gussets, corner joints, x-braced frames
661
Experimental testing of journal bearings with two-component surface layer in the presence of an oil abrasive contaminant
662
Experimental testing of models for the estimation of hourly solar radiation on vertical surfaces at Arcavacata di Rende
663
Experimental Testing Of Rice Husk Ash Concrete Beams
664
Experimental testing of rust fungus-mediated herbivory resistance in Betula pendula
665
Experimental testing of tall reinforced masonry walls under out-of-plane actions
666
Experimental testing of the artificial neural network based protection of power transformers
667
Experimental testing of the durability of lime-based mortars used for rendering historic buildings
668
Experimental testing on free vibration behaviour for silicone rubbers proposed within lumbar disc prosthesis
669
Experimental tests and analytical model of high damping rubber dissipating devices
670
Experimental tests and modeling of the optimal orifice size for a closed cycle 4He sorption refrigerator Original Research Article
671
Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips
672
Experimental tests and numerical modeling of reinforced masonry arches
673
Experimental tests and numerical modelling of wall sandwich panels
674
Experimental tests and numerical simulation studies on nano-indentation of TiN film deposited on N+-implanted aluminum
675
Experimental tests and thermo-mechanical analyses on the HEXCALIBER mock-up
676
Experimental tests concerning the impact resistance of a tailplane
677
Experimental tests for the application of an analytical model for flexible debris flow barrier design
678
Experimental tests of a hybrid pixellated detector for gamma imaging
679
Experimental tests of a hybrid pixellated detector for gamma imaging
680
Experimental tests of a nano-DMA with no voltage change between aerosol inlet and outlet slits
681
Experimental tests of an air-cooling hydrogen fuel cell hybrid electric scooter
682
Experimental tests of asymptotic freedom
683
Experimental tests of blends of hydrogen and natural gas in light-duty vehicles
684
Experimental tests of Chiral Perturbation Theory
685
Experimental tests of dead-time corrections
686
Experimental tests of dead-time corrections
687
Experimental tests of different types of bolted steel beam–column joints under a central-column-removal scenario
688
Experimental tests of dropwise cooling on infrared-transparent media
689
Experimental tests of EEG source localization accuracy in realistically shaped head models
690
Experimental tests of EEG source localization accuracy in spherical head models
691
Experimental tests of low degree peridotite partial melt compositions: implications for the nature of anhydrous near-solidus peridotite melts at 1 GPa
692
Experimental Tests of Middle Palaeolithic Spear Points Using a Calibrated Crossbow
693
Experimental tests of neutron shielding for the ATLAS forward region
694
Experimental tests of neutron shielding for the ATLAS forward region
695
Experimental tests of scaling predictions of the spatial distribution of particles during the drying of colloidal films
696
Experimental tests of sex-allocation theory in plants
697
Experimental tests of slender reinforced concrete columns under combined axial load and lateral force
698
Experimental tests of stability and load carrying capacity of compressed thin-walled multi-cell columns of triangular cross-section
699
Experimental tests of stereological estimates of grain boundary populations Original Research Article
700
Experimental tests of the endowment effect
701
Experimental tests of the injection Y on the University of Maryland Electron Ring
702
Experimental tests of the injection Y on the University of Maryland Electron Ring
703
Experimental tests of the new plastic scintillator with pulse shape discrimination capabilities EJ-299-33
704
Experimental tests of the new plastic scintillator with pulse shape discrimination capabilities EJ-299-33
705
Experimental tests of the Somatic Marker hypothesis
706
Experimental tests of the strong interaction and its energy dependence in electron–positron annihilation
707
Experimental tests of the strong interaction and its energy dependence in electron–positron annihilation
708
Experimental tests of the trigger prototype for the AMADEUS experiment based on Sci-Fi read by MPPC
709
Experimental tests of the trigger prototype for the AMADEUS experiment based on Sci-Fi read by MPPC
710
Experimental tests of transport models using modulated electron cyclotron heating
711
Experimental Tests of Villin Subdomain Folding Simulations
712
Experimental Tests on Cement Mortars Manufactured with Hemp Flour
713
Experimental tests on existing RC beams strengthened in flexure and retrofitted for shear by C‑FRP in presence of negative moments
714
Experimental tests on GFRP truss modules for dismountable bridges
715
Experimental tests on Li-ceramic breeders for the helium cooled pebble bed (HCPB) blanket design
716
Experimental tests on pure aluminium shear panels with welded stiffeners
717
Experimental tests on pure aluminium shear panels with welded stiffeners
718
Experimental tests on reinforced concrete columns under biaxial quasi-static loading
719
Experimental tests on reinforced concrete columns under multi-dimensional dynamic loadings
720
Experimental tests on retrofitted RC beam-column joints underdesigned to seismic loads. General approach
721
Experimental tests on seismically damaged composite steel concrete walls retrofitted with CFRP composites
722
Experimental tests on steam reforming of natural gas in a reformer and membrane modules (RMM) plant
723
Experimental tests on typical screw connections for cold-formed steel housing
724
Experimental tests to validate the rate-limiting step assumption used in the kinetic analysis of solid-state reactions
725
Experimental tests with MISANS (Modulated Intensity Small Angle Neutron Scattering) at IPNS (Intense Pulsed Neutron Source)
726
Experimental tests with MISANS (Modulated Intensity Small Angle Neutron Scattering) at IPNS (Intense Pulsed Neutron Source)
727
Experimental theory, fundamentals and mathematical evaluation of phosphate diffusion in meats Original Research Article
728
Experimental therapeutic studies of Solanum aculeastrum Dunal. on Leishmania major infection in BALB/c mice
729
Experimental thermal behavior of a power plant reheater
730
Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls
731
Experimental thermal conductivity of ethylene glycol and water mixture based low volume concentration of Al2O3 and CuO nanofluids
732
Experimental thermal performance evaluation of a horizontal ground-source heat pump system
733
Experimental thermal performance of a solar source heat-pump system for residential heating in cold climate region
734
Experimental thermal performance study of an inclined heat pipe heat exchanger operating in high humid tropical HVAC systems
735
Experimental thermal properties characterization of insulating cork–gypsum composite
736
Experimental thermal study of a solar wall of composite type
737
Experimental thermal–hydraulic evaluation of constructal microfluidic structures under fully constrained conditions
738
Experimental thermal–hydraulic evaluation of CuO nanofluids in microchannels at various concentrations with and without suspension enhancers
739
Experimental thermochemical study of two polymethylpyrazine N,N′-dioxide derivatives
740
Experimental thermodynamic cycles and performance analysis of a solar-powered adsorptive icemaker in hot humid climate
741
Experimental thermodynamic evaluation for a single stage heat transformer prototype build with commercial PHEs
742
Experimental thermodynamic study of intermetallic phases in the binary Ag–Te system by an improved EMF method
743
Experimental thermodynamic study of the equilibrium phase AgBi3S5 by an improved EMF method
744
Experimental thermodynamics for the evaluation of ALD growth processes
745
Experimental thermomechanic study of Newtonian and non-Newtonian suspension flows
746
Experimental tight-binding parameterization of the oxygen-metal interaction: application to the Rh(1 1 0)(2 × 2)p2mg-O surface
747
Experimental time saving in NMR measurement of time dependent diffusion coefficients
748
Experimental to study the effect of multiple weld-repairs on microstructure, hardness and residual stress for a stainless steel clad plate
749
Experimental tokamak reactor concept design for fusion-fusion hybrid reactor and volumetric neutron source
750
Experimental Tongue Carcinogenesis Induced by 4-Nitroquinoline 1-Oxide in Wistar Rats: A Suitable Tool for Understanding Oral Cancer Pathogenesis: a Review
751
Experimental torsional shear properties of carbon fiber reinforced epoxy composites containing carbon nanotubes
752
Experimental tour-based travel demand models
753
Experimental toxicity and bioaccumulation of cadmium in freshwater periphytic diatoms in relation with biofilm maturity Original Research Article
754
Experimental toxocariosis in BALB/c mice: Effect of the inoculation dose on brain and eye involvement
755
Experimental Toxoplasmosis in White Turkeys
756
Experimental tracheal reconstruction with a rotated right stem bronchus
757
Experimental tracking of silica dispersion into silicone polymer
758
Experimental transfer function for a low-pressure differential mobility analyzer by use of a monodisperse C60 monomer
759
Experimental transformation of Na,Ca-smectite under basic conditions at 150 °C
760
Experimental transient natural convection heat transfer from a vertical cylindrical tank
761
Experimental transient performance of a heat pump equipped with a distillation column
762
Experimental transition probabilities and Stark shifts in O III and O IV spectra
763
Experimental transition state for the B-chlorodiisopinocampheylborane (DIP-Cl) reduction
764
Experimental transition state for the Corey–Bakshi–Shibata reduction
765
Experimental translocation of the endangered shrub Apalachicola rosemary Conradina glabra to the Apalachicola Bluffs and Ravines Preserve, Florida Original Research Article
766
Experimental transmission of malacosporean parasites from bryozoans to common carp (Cyprinus carpio) and minnow (Phoxinus phoxinus)
767
Experimental transplanting of Posidonia australis seagrass in Port Hacking, Australia, to assess the feasibility of restoration
768
Experimental transport-rate budgets in complex 3-D turbulent flow near a wing/body junction
769
Experimental treatment may show promise for vCJD
770
Experimental Treatment of a Suspected Case of Mycetoma Based on Dot-in-Circle Sign
771
Experimental treatment of early stuttering: A preliminary study
772
Experimental treatment of recurrent otitis externa
773
Experimental treatments for acute ischaemic stroke
774
Experimental treatments for mitochondrial dysfunction in sepsis: A narrative review
775
Experimental trends in polymer nanocomposites—a review
776
Experimental trends in polymer nanocomposites—a review
777
Experimental trends of NO in circulating fluidized bed combustion
778
Experimental trials to make wheat straw pellets with wood residue and binders
779
Experimental Tribulus terrestris poisoning in goats
780
Experimental Tricyclic Antidepressant Toxicity: A Randomized, Controlled Comparison of Hypertonic Saline Solution, Sodium Bicarbonate, and Hyperventilation, ,
781
Experimental Trypanosoma evansi infection in South American coati (Nasua nasua): hematological, biochemical and histopathological changes
782
Experimental tudie of indocyanine green dye–enhanced photocoagulation of choroidal neovacularization feeder veel
783
Experimental tudy of an automated ytem for the delivery of eyedrop uing a microinfuion pump
784
Experimental tudy of tetrodotoxin, a long-acting topical anethetic Original Reearch Article
785
Experimental tudy of vicoelatic in the prevention of corneal endothelial deiccation injury from vitreal fluid-air exchange
786
Experimental tumbling of echinoderms — Taphonomic patterns and implications
787
Experimental uncertainty of measured entropy production with pulsed laser PIV and planar laser induced fluorescence
788
Experimental unfolding of the nonlinear dynamics of a cable-mass suspended system around a divergence-Hopf bifurcation
789
Experimental unit for determining the fracture-toughness characteristics of materials
790
Experimental unsteady characterization of heat transfer in a multi-layer wall including air layers—Application to vertically perforated bricks
791
Experimental Upgrades of Membrane Introduction Mass Spectrometry for Water and Air Analysis
792
Experimental Upper Bound for the Performance of Convolutive Source Separation Methods
793
Experimental uremia affects parasympathetic innervation of the heart
794
Experimental Use of Autogenous Bone Grafts as an Alternative Method for Bone Plates in Treatment of Mandibular Fracture
795
Experimental use of salt to control the invasive marine alga Caulerpa taxifolia in New South Wales, Australia Original Research Article
796
Experimental Vaccination Against Newcastle Disease in Japanese Quails {Coturnix coturnix japonica): Clinical and Immunological Parameters
797
Experimental vaccination of sheep against hydatid cyst using EG95 recombinant vaccine
798
Experimental vaccination of sheep against hydatid cyst using EG95 recombinant vaccine
799
Experimental vaccine against lactococcosis in cultured rainbow trout (Oncorhynchus mykiss)
800
Experimental Validation and Applications of a Fluid Infiltration Model
801
Experimental validation and CFD modeling study of biomass fast pyrolysis in fluidized-bed reactors
802
Experimental validation and sensitivity analysis of a coupled BES–HAM model
803
Experimental validation for a mathematical model describing beryllium retention on flow-through fixed bed reactor of Amb-IR-120
804
Experimental validation in software engineering
805
Experimental validation of 2D DEM code by digital image analysis in tumbling mills
806
Experimental validation of 3D simulations of tungsten melt erosion under ITER-like transient loads
807
Experimental validation of 5 kN model electromagnetic vibration damper and design of a real-size 120 kN machine
808
Experimental validation of a CFD and an ε-NTU model for a large tube-in-tank PCM system
809
Experimental validation of a CFD model for tubes in a phase change thermal energy storage system
810
Experimental validation of a collocated PVDF volume velocity sensor/actuator pair
811
Experimental validation of a complex, large-scale, rigid-body mechanism
812
Experimental validation of a computational fluid dynamics code to predict the wind speed in street canyons for passive cooling purposes
813
Experimental validation of a computationally efficient beam element for combined finite-discrete element modelling of structures in distress
814
Experimental validation of a coupled magneto-thermal model for a flat-parallel-plate active magnetic regenerator
815
Experimental validation of a coupled neutron–photon inverse radiation transport solver
816
Experimental validation of a coupled neutron–photon inverse radiation transport solver
817
Experimental validation of a coupled photon Monte Carlo and CAD software
818
Experimental validation of a coupled photon Monte Carlo and CAD software
819
Experimental validation of a deterministic model for aerosol reentrainment out from the boiling pool
820
Experimental validation of a direct pre-design formula for TLCD
821
Experimental validation of a finite-element model updating procedure
822
Experimental validation of a fractional model for creep/recovery testing of asphalt mixtures
823
Experimental validation of a frequency domain BEM model to study 2D and 3D heat transfer by conduction
824
Experimental validation of a heat transfer model for concentrating photovoltaic system
825
Experimental validation of a high resolution nano-DMA
826
EXPERIMENTAL VALIDATION OF A HYBRID WIDE-ANGLE PARABOLIC EQUATION - INTEGRAL EQUATION TECHNIQUE FOR MODELING WAVE PROPAGATION IN INDOOR WIRELESS COMMUNICATIONS
827
Experimental validation of a kinetic multi-component mechanism in a wide HCCI engine operating range for mixtures of n-heptane, iso-octane and toluene: Influence of EGR parameters
828
Experimental validation of a lap-type joint AC loss model with an ITER correction coil conductor joint
829
Experimental Validation of a Linearized Kinematic Wave Equation for Micro-Catchment Water Harvesting Design
830
Experimental validation of a lumped model of single droplet deformation, oscillation and detachment on the GDL surface of a PEM fuel cell
831
Experimental validation of a methanol crossover model in DMFC applications
832
Experimental validation of a method for performance monitoring of the front-end permeators in the TEP system of ITER
833
Experimental validation of a method for performance monitoring of the impurity processing stage in the TEP system of ITER
834
Experimental validation of a methodology to control irrigation canals based on Saint-Venant equations
835
Experimental validation of a microcracking-based toughening mechanism for cortical bone
836
Experimental validation of a model for an information-embedded power system
837
Experimental validation of a model for α-chymotrypsin activity in aqueous solutions of surfactant aggregates
838
Experimental validation of a model relating water content to the electrical conductivity of peat
839
Experimental validation of a new heat transfer intensification method for FCC external catalyst coolers
840
Experimental validation of a new integrated simulated moving bed process for the production of single enantiomers
841
Experimental validation of a new model for the initial stage of sintering of single phase systems Original Research Article
842
Experimental validation of a nonlinear backstepping liquid level controller for a state coupled two tank system
843
Experimental validation of a novel smart electromechanical tuned mass damper beam device
844
Experimental validation of a numerical code by thin film heat flux sensors for the resolution of thermal bridges in dynamic conditions
845
Experimental validation of a numerical model for subway induced vibrations
846
Experimental validation of a numerical model for heat transfer in vacuum glazing
847
Experimental validation of a predicted microRNA within human FVIII gene
848
Experimental validation of a probabilistic model for estimating the double axis PV tracking energy production
849
Experimental validation of a prototype ejector designed to reduce throttling losses encountered in transcritical R744 system operation
850
Experimental validation of a quasi three-dimensional conjugate heat transfer model for the metering section of a single-screw plasticating extruder
851
Experimental validation of a quasi-steady theory for the flow through the glottis
852
Experimental validation of a real time energy management system for microgrids in islanded mode using a local day-ahead electricity market and MINLP
853
Experimental validation of a real-time energy management system using multi-period gravitational search algorithm for microgrids in islanded mode
854
Experimental Validation of a Shear Stud Connection between Steel Girders and a Fiber-Reinforced Polymer Deck in the Transverse Direction
855
Experimental validation of a statistical model for the Wöhler field corresponding to any stress level and amplitude
856
EXPERIMENTAL VALIDATION OF A STRUCTURAL HEALTH MONITORING METHODOLOGY: PART I. NOVELTY DETECTION ON A LABORATORY STRUCTURE
857
EXPERIMENTAL VALIDATION OF A STRUCTURAL HEALTH MONITORING METHODOLOGY: PART II. NOVELTY DETECTION ON A GNAT AIRCRAFT
858
EXPERIMENTAL VALIDATION OF A STRUCTURAL HEALTH MONITORING METHODOLOGY: PART III. DAMAGE LOCATION ON AN AIRCRAFT WING
859
EXPERIMENTAL VALIDATION OF A TDR-BASED SYSTEM FOR MEASURING LEAK DISTANCES IN BURIED METAL PIPES
860
Experimental validation of a theoretical model for flexural modulus of elasticity of thin cement composite
861
Experimental validation of a thermal model for the ampacity derating of electric cables in wrapped trays
862
Experimental validation of a time-domain-based wave propagation model of blood flow in viscoelastic vessels
863
Experimental Validation of a Two-Phase Flow Model for Pressure Drop and Liquid Hold-up in Downflow Packed Bed Bubble Reactors
864
Experimental validation of a type-2 fuzzy logic controller for energy management in hybrid electrical vehicles
865
Experimental validation of a type-2 fuzzy logic controller for energy management in hybrid electrical vehicles
866
Experimental Validation of Adaptive Sliding Mode Fuzzy Controller for an Inertially Stabilized Platform
867
Experimental validation of an ambient vibration-based multiple damage identification method using statistical modal filtering
868
Experimental validation of an analytical method to obtain the response function of an alpha particle spectrometer
869
Experimental validation of an analytical model for predicting the thermal and hydrodynamic capabilities of flat micro heat pipes
870
Experimental validation of an autonomous control system on a mobile robot platform
871
Experimental validation of anisotropic ductile damage and failure of shock wave-loaded plates
872
Experimental validation of binary collisions between wave fragments in the photosensitive Belousov–Zhabotinsky reaction
873
Experimental validation of calculations of decay heat induced by 14 MeV neutron activation of ITER materials
874
Experimental validation of CFD mass transfer simulations in flat channels with non-woven net spacers
875
Experimental validation of CFD models for fluidized beds: Influence of particle stress models, gas phase compressibility and air inflow models
876
Experimental Validation of Circumferential, Longitudinal, and Radial 2-Dimensional Strain During Dobutamine Stress Echocardiography in Ischemic Conditions Original Research Article
877
Experimental validation of coincidence summing corrections computed by the ETNA software
878
Experimental validation of computational fluid dynamics modeling for narrow tillage tool draft
879
Experimental validation of computational models for mass transport through micro heterogeneous membranes
880
Experimental validation of concentration profiles in an HCCI engine, modelled by a multi-component kinetic mechanism: Outline for auto-ignition and emission control
881
Experimental validation of concrete crack identification and location with acoustic emission method
882
Experimental validation of constant efficiency models for the subsystems of an unconventional desiccant-based Air Handling Unit and investigation of its performance
883
Experimental validation of crystalline silicon solar cells recycling by thermal and chemical methods
884
Experimental validation of different MIMO-feedback controller design methods
885
Experimental validation of distinct element simulation for dynamic wheel–soil interaction
886
Experimental validation of dose calculation algorithms for the GliaSiteTM RTS, a Novel 125I liquid-filled balloon brachytherapy applicator
887
Experimental validation of dynamic simulation of the flat plate collector in a closed thermosyphon solar water heater
888
Experimental validation of edge strength model for glass with polished and cut edge finishing
889
Experimental validation of effectiveness of rod-type burnable poisons on reactivity control in HTTR
890
Experimental validation of electromagnetic edge waves on a PEC wedge
891
Experimental validation of FE predicted fracture behaviour in thermally sprayed coatings
892
Experimental validation of finite element codes for welding deformations
893
Experimental validation of finite element model for proximal composite femur using optical measurements
894
Experimental validation of formaldehyde rotational state selection
895
Experimental validation of free vibrations from nonsymmetrical thin walled beams
896
Experimental validation of glazed hybrid micro-channel solar cell thermal tile
897
Experimental validation of granular dynamics simulations of gas-fluidised beds with homogenous in-flow conditions using Positron Emission Particle Tracking
898
Experimental Validation of Improving Aircraft Rolling Power Using Piezoelectric Actuators
899
Experimental validation of intact and implanted distal femur finite element models
900
Experimental validation of Lagrangian–Eulerian simulations of fluidized beds
901
Experimental validation of large eddy simulations of flow and heat transfer in a stationary ribbed duct
902
Experimental validation of large-scale simulations of dynamic fracture along weak planes
903
EXPERIMENTAL VALIDATION OF LMTD METHOD FOR MICROSCALE HEAT TRANSFER
904
Experimental validation of local exhaust strategies for improved IAQ in aircraft cabins
905
Experimental validation of local thermal equilibrium in a MW plasma torch for hydrogen production
906
Experimental validation of main components of the Tokamak exhaust process for ITER-FEAT
907
Experimental validation of modal strain energies based damage identification method for a composite sandwich beam
908
Experimental validation of multiscale modeling of indentation of suspended circular graphene membranes
909
Experimental validation of numerical thermal models for dry grinding
910
Experimental validation of passive permafrost cooling systems
911
Experimental validation of polyhedral discrete element model
912
Experimental validation of pressure loss in anemometer testing equipment
913
Experimental validation of product quality model for bread baking process
914
Experimental validation of second-order diffraction coefficients for computation of path-loss past buildings
915
Experimental validation of seismic code provisions for RC columns
916
Experimental validation of sheet thickness optimisation for superplastic forming of engineering structures
917
Experimental validation of shut down dose rates calculations inside ITER cryostat
918
Experimental validation of simulation methods for bi-directional transmission properties at the daylighting performance level
919
Experimental Validation of Small-field Dosimetry in Radiotherapy Using Ionization Chamber and Edge Detector
920
Experimental validation of the “EasyTest Cell” operational principle for autonomous MEA characterization
921
EXPERIMENTAL VALIDATION OF THE CONSTANT LEVEL METHOD FOR IDENTIFICATION OF NON-LINEAR MULTI-DEGREE-OF-FREEDOM SYSTEMS
922
Experimental validation of the distillation module of a desalination station using the SMCEC principle
923
Experimental validation of the dynamic models of a high performance workpiece table under preloaded Hertzian contact
924
Experimental validation of the ʹfloating islandsʹ concept: 95v breakdown voltage vertical FLIdiode
925
Experimental validation of the gas–solid flow in the CFB riser
926
Experimental validation of the helical steam generator model in the TASS/SMR code
927
Experimental validation of the lifetime performance of a proportional 4/3 hydraulic valve operating in water
928
Experimental validation of the modified couple stress Timoshenko beam theory for web-core sandwich panels
929
Experimental validation of the nerve conduction velocity selective recording technique using a multi-contact cuff electrode
930
Experimental validation of the ON–OFF packet-level model for IP traffic
931
Experimental validation of the shear correction factor
932
Experimental validation of the simulation module of the water-cooled variable refrigerant flow system under cooling operation
933
Experimental validation of the TASS/SMR code for an integral type pressurized water reactor
934
Experimental validation of the thermal-hydraulic code SACATRI Original Research Article
935
Experimental validation of theoretical models in two-phase high-viscosity ratio liquid–liquid flows in horizontal and slightly inclined pipes
936
Experimental validation of theoretical traction law for inclined through-thickness reinforcement
937
Experimental validation of thermal model of a double slope active solar still under natural circulation mode Original Research Article
938
Experimental validation of tonal noise control from subsonic axial fans using flow control obstructions
939
Experimental validation of two-dimensional depth-averaged models for forecasting rainfall–runoff from precipitation data in urban areas
940
Experimental validation of two-phase pressure drop multiplier as a diagnostic tool for characterizing PEM fuel cell performance
941
Experimental validation of unsteady models for fluid structure interaction: Application to yacht sails and rigs
942
Experimental validation of upgraded designs for PERMCAT reactors considering mechanical behaviour of Pd/Ag membranes under H2 atmosphere
943
Experimental validation of vibration-based damage detection for static laminated composite shells partially filled with fluid
944
Experimental validation of void fraction models for R410A air conditioners
945
Experimental validation of XRF inversion code for Chandrayaan-1
946
Experimental validation on granular metallic films of an optical model based on the entropic analysis of their morphology
947
Experimental validation, quality control methods and unified theory for DTI error propagation are needed
948
Experimental validation, quality control methods and unified theory for DTI error propagation are needed: a rebuttal
949
Experimental validations of elastic to plastic asperity-based models using normal indentations of rough surfaces
950
Experimental valuation of food safety Application to sewage sludge
951
Experimental valuation of food safety: Application to sewage sludge
952
Experimental values and analysis of mixing heats of the binary mixtures formed by alkyl benzoates and n-alkanes
953
Experimental values for 241Am and 239+240Pu Kdʹs in French agricultural soils
954
Experimental values for adjusting an automatic control valve in gas pipeline transportation
955
Experimental Van Deemter plots of shear-driven liquid chromatographic separations in disposable microchannels
956
Experimental vapor pressure data and a vapor pressure equation for fluoroethane (HFC-161)
957
Experimental vapor pressure data and a vapor pressure equation for trifluoroiodomethane (CF3I)
958
Experimental vapor pressures and derived thermodynamic properties of aqueous solutions of lithium sulfate from 423 to 573 K
959
Experimental vapor pressures and thermodynamic models of perfluorocarbons PP80 and PP90
960
Experimental vapor pressures of 1,2-bis(dimethylamino)ethane, 1-methylmorpholine, 1,2-bis(2-aminoethoxy)ethane and N-benzylethanolamine between 273.18 and 364.97 K
961
Experimental vapor pressures of alkyl and aryl sulfides: Prediction by a group contribution method
962
Experimental vapour pressures of 13 secondary and tertiary alcohols—correlation and prediction by a group contribution method
963
Experimental vapour–liquid equilibrium data of HI–H2O–I2 mixtures for hydrogen production by Sulphur–Iodine thermochemical cycle
964
Experimental variables in the synthesis of brookite phase TiO2 nanoparticles
965
Experimental variables in the synthesis of brookite phase TiO2 nanoparticles
966
Experimental velocities and accelerations in very steep wave events in deep water
967
Experimental verification and theoretical prediction of cartilage interstitial fluid pressurization at an impermeable contact interface in confined compression
968
Experimental verification for real-time environmental emergency response system: WSPEEDI by European tracer experiment
969
Experimental verification for simulation study of Pt/CNT nanostructured cathode catalyst layer for PEM fuel cells
970
Experimental Verification of a Battery Energy Storage Systemfor Integration with Photovoltaic Generators
971
Experimental verification of a computational technique for determining ground reactions in human bipedal stance
972
Experimental verification of a condenser with liquid–vapor separation in an air conditioning system
973
Experimental verification of a CT-based Monte Carlo dose-calculation method in heterogeneous phantoms
974
Experimental verification of a CT-based Monte Carlo dose-calculation method in heterogeneous phantoms
975
Experimental verification of a deep drawing tool system for adaptive blank holder pressure distribution
976
Experimental verification of a diffusion tool wear model using a 42CrMo4 steel with an uncoated cemented tungsten carbide at various cutting speeds
977
Experimental verification of a dynamic model of a tube roll in terms of subcritical superharmonic vibrations
978
Experimental verification of a hybrid fuzzy control strategy for a high-performance brushless DC drive system
979
Experimental verification of a method of detection of multiple cracks in beams based on frequency measurements
980
Experimental verification of a micromechanical model for polycrystalline shape memory alloys in dependence of martensite orientation distributions
981
Experimental verification of a model describing solid phase microextraction (SPME) of freely dissolved organic pollutants in sediment porewater Original Research Article
982
Experimental verification of a model for rotating reverse osmosis Original Research Article
983
Experimental verification of a model of erosion due to the impact of rigid single angular particles on fully plastic targets
984
Experimental verification of a model of erosion due to the impact of rigid single angular particles on fully plastic targets
985
Experimental verification of a model of erosion due to the impact of rigid single angular particles on fully plastic targets
986
Experimental verification of a new quantification procedure for elemental mapping by analytical X-ray microscopy
987
Experimental verification of a new quantification procedure for elemental mapping by analytical X-ray microscopy
988
Experimental verification of a newly developed implicit creep model for steel structures exposed to fire
989
Experimental verification of a particle induced friction model in journal bearings
990
Experimental verification of a radiative model of laser-induced plasma expanding into vacuum
991
Experimental verification of a radiative model of laser-induced plasma expanding into vacuum
992
Experimental verification of a rolling-piston expander that applied for low-temperature Organic Rankine Cycle
993
Experimental verification of a three-phase multilevel rectifier with reduced number of power switches
994
Experimental verification of an algorithm for identification of linear time-varying systems
995
Experimental verification of analytical and CFD predictions of infiltration through cold store entrances
996
Experimental verification of basic analytical assumptions used in the analysis of structural wall buildings
997
Experimental verification of brain tissue incompressibility using digital image correlation
998
Experimental verification of buckling-mode interaction in intermediate-length composite columns
999
Experimental verification of calculated radiation-induced heat conduction effects in the water absorbed dose calorimeter
1000
Experimental verification of ceramic membrane potentials for supporting three-phase catalytic reactions
