<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Influence of concrete composition on the characterization of fracture surface
2
Influence of concrete fracture on the rain infiltration and thermal performance of building facades
3
Influence of concrete properties on bleeding and evaporation
4
Influence of concrete properties on the detection of voids with impulse-thermography
5
Influence of Concrete Strength and Transverse Reinforcement Yield Strength on Behavior of High-Strength Concrete Columns
6
Influence of concrete strength estimation on the structural safety assessment of existing structures
7
Influence of concrete strength on crack development in SFRC members
8
Influence of concurrent and functional training on miR-1/miR-126 gene expression and cardiovascular function in postmenopausal women
9
Influence of concurrent renal dysfunction on outcomes of patients with acute coronary syndromes and implications of the use of glycoprotein IIb/IIIa inhibitors
10
Influence of concurrent substances on removal of hydrogen sulfide by activated carbon
11
Influence of condensate inundation on heat transfer of R134a condensing on three dimensional enhanced tubes and integral-fin tubes with high fin density
12
Influence of condensation on the stability of a liquid film moving under the effect of gravity and turbulent vapor flow
13
Influence of condensation surface on solar distillation Original Research Article
14
Influence of condensed silica fume on the properties of cement-based solidified wastes
15
Influence of condensed tannins from Brazilian semi-arid legumes on ruminal degradability, microbial colonization and ruminal enzymatic activity in Saanen goats
16
Influence of condensed water on heat radiation absorptivity at cryogenic temperatures Original Research Article
17
Influence of condition of surgical margins on local recurrence and disease-specific survival in oral and oropharyngeal cancer
18
Influence of conditioning temperature on performance, apparent metabolisable energy, ileal digestibility of starch and nitrogen and the quality of pellets, in broiler starters fed maize- and sorghum-based diets
19
Influence of conditioning temperatures on amino acid digestibility coefficients at four small intestinal sites and their dynamics with starch and nitrogen digestion in sorghum-based broiler diets
20
Influence of conditions and N-substituent on the reactions of 6-methoxy-3-methyl-6,6a-dihydrofuro[3,4-d]isoxazol-4(3aH)-one with hydrazines
21
Influence of Condom and Contraceptive Pills on Weight Gain among Some Algerian Female Athletes
22
Influence of conduction disturbances on clinical outcome in patients with acute myocardial infarction receiving thrombolysis (results from the ARGAMI-2 study)
23
Influence of conductive heat-losses on the propagation of premixed flames in channels
24
Influence of conductive surface on adsorption behavior of ultrafiltration membrane
25
Influence of conductivity tensors on the scalp electrical potential: study with 2-D finite element models
26
Influence of conduit network geometry on solute transport in karst aquifers with a permeable matrix
27
Influence of cone morphology on dykes, Stromboli, Italy
28
Influence of configuration at dopant sites on catalytic activity of phosphorus-doped graphite
29
Influence of Confinement Housing on the Cecal Environment of the Horse
30
Influence of confinement on conformational entropy of a polymer chain and structure of polymer–nanoparticles complexes
31
Influence of confinement on molecular and director reorientational dynamics of liquid crystal
32
Influence of Confining Hoop Flexural Stiffness on Behavior of High-Strength Lightweight Concrete Columns
33
Influence of Confocal Scanning Laser Microscopy specific acquisition parameters on the detection and matching of Speeded-Up Robust Features
34
Influence of Confocal Scanning Laser Microscopy specific acquisition parameters on the detection and matching of Speeded-Up Robust Features
35
Influence of conformation on the absorption spectra of flexible organic dyes used in dye-sensitized solar cells
36
Influence of conformation on the electronic structure of thiacalixarenes according to DFT calculations and X-ray emission spectroscopy
37
Influence of conformational flexibility on biological activity in cyclic astin analogues
38
Influence of Congestive Heart Failure on Endothelin Levels and Receptors in Rabbits
39
Influence of conical projectile diameter on perpendicular impact of thin steel plate
40
Influence of conjugated linoleic acid isomers on the metastasis of colon cancer cells in vitro and in vivo
41
Influence of conjugated linoleic acid on body composition and target gene expression in peroxisome proliferator-activated receptor α-null mice
42
Influence of connectivity of concrete pores and associated diffusion of oxygen on corrosion of steel under high humidity
43
Influence of connectivity, habitat quality and invasive species on egg and larval distributions and local abundance of crucian carp in Japanese agricultural landscapes
44
Influence of connector dimensions on the stress distribution of monolithic zirconia and lithium-di-silicate inlay retained fixed dental prostheses e A 3D finite element analysis
45
Influence of Connector Width on the Stress Distribution of Posterior Bridges under Loading
46
Influence of conservation education dive briefings as a management tool on the timing and nature of recreational SCUBA diving impacts on coral reefs
47
Influence of conservation tillage and crop rotation on the resilience of an intensive long-term potato cropping system: Restoration of soil biological properties after the potato phase
48
Influence of conservation tillage and glyphosate on soil structure and organic carbon fractions through the cycle of a 3-year potato rotation in Atlantic Canada
49
Influence of conservation tillage and glyphosate on soil structure and organic carbon fractions through the cycle of a 3-year potato rotation in Atlantic Canada
50
Influence of conservation tillage and rotation length on potato productivity, tuber disease and soil quality parameters on a fine sandy loam in eastern Canada
51
Influence of conservation tillage on soil physicochemical properties in a tropical rainfed agricultural system of northeast India
52
Influence of conservation tillage on winter bird use of arable fields in Hungary
53
Influence of consolidation parameters on the microstructure and hardness of bulk copper samples made from nanopowders
54
Influence of Consonant Voicing Characteristics on Sentence Production in Abductor Versus Adductor Spasmodic Dysphonia
55
Influence of consonantal context on the pronunciation of vowels: A comparison of human readers and computational models
56
Influence of consonantal context on the reading of vowels: Evidence from children
57
Influence of Conspecific Contact Upon Blood Sex Steroid Levels and the Dynamics of Ovarian Development in Female Red-Bellied Tilapia, Tilapia zillii
58
Influence of constant current on the formation of a neck in a porous bar subjected to tension
59
INFLUENCE OF CONSTANT TEMPERATURE DEGREES ON THE BIOLOGICAL CHARACTERS AND PREDACEOUS EFFICIENCY OF THE PREDATOR Rodolia cardinalis (MULSANT)
60
Influence of constituent properties and microstructural parameters on the tensile modulus of a polymer/clay nanocomposite
61
Influence of constituents on the ductile fracture of Al–Cu–Mg alloys: Modulated by the aging treatment
62
Influence of constitutional liquation on corrosion behaviour of aluminium alloy 2017A
63
Influence of constitutive model in springback prediction using the split-ring test
64
Influence of constitutive model in springback prediction using the split-ring test
65
Influence of construction errors on Wendelstein 7-X magnetic configurations
66
INFLUENCE OF CONSTRUCTION INTERFACE MANAGEMENT PRACTICE ON PROJECT PERFORMANCE IN NIGERIA
67
Influence of Construction Method on Water Permeation of Interlocking Block Masonry
68
Influence of Construction Method on Water Permeation of Interlocking Block Masonry
69
Influence of constructive and operating parameters on a modified Trombe wall efficiency
70
Influence of constructive parameters on the performance of two indirect evaporative cooler prototypes
71
Influence of consumersʹ socioecological and economic orientations on preferences for wood products with sustainability labels
72
Influence of contact conditions on tribological behaviour of DLC coatings
73
Influence of contact configuration on fretting fatigue behavior of Ti–6Al–4V under independent pad displacement condition
74
Influence of contact duration on sediment-associated copper fractionation and bioavailability
75
Influence of contact geometry and molecular derivatization on the interfacial interactions between gold and conjugated wires
76
Influence of contact medium and surfactants on carbon dioxide clathrate hydrate kinetics
77
Influence of contact metals on the performance and morphology of pentacene bottom-contact field-effect transistors
78
Influence of contact pressure and boundary films on the frictional behaviour and on the roughness changes of galvanized steel sheets
79
Influence of contact pressure on fretting fatigue behaviour of AA 2014 alloy with dissimilar mating material
80
Influence of contact shape and supporting condition on tube fretting wear
81
Influence of contact stress on rolling contact fatigue of composite ceramic coatings plasma sprayed on a steel roller
82
Influence of contact surface quality and contact material on the contact resistances of high current connections
83
Influence of contact wire pre-sag on the dynamics of pantograph–railway catenary
84
Influence of contact wire pre-sag on the dynamics of pantograph–railway catenary
85
Influence of contacts and substrate on semi-insulating GaAs detectors
86
Influence of contacts and substrate on semi-insulating GaAs detectors
87
Influence of contamination and cleaning on bond strength to modified zirconia
88
Influence of contamination on the thermal evaporation of a zinc melt
89
Influence of context effects on health outcomes: a systematic review
90
Influence of Contextual Learning Model and Learning Motivation in the Ability to Solve the Comparison Story
91
Influence of continental outflow on aerosol chemical characteristics over the Arabian Sea during winter
92
Influence of continuation of beta blockers during dobutamine stress echocardiography for the assessment of myocardial viability in patients with severe ischemic left ventricular dysfunction
93
Influence of continuity and aspect-ratio on the buckling of skew plates and plate assemblies
94
Influence of continuous application of inorganic nutrients to a Maize–Wheat rotation on soil enzyme activity and grain quality in a rainfed Indian soil
95
Influence of continuous cultivation on the soil properties affecting crop productivity in the Thar Desert, India
96
Influence of Continuous Infusion of Low-Dose Human Atrial Natriuretic Peptide on Renal Function During Cardiac Surgery: A Randomized Controlled Study
97
Influence of continuous membrane bioreactor operation on ferrichrome production using Ustilago maydis Original Research Article
98
Influence of Continuous Nursing on the Psychological State and Coping Style of Patients Undergoing Pacemaker Implantation
99
Influence of Continuous or Reciprocating Optimum Torque Reverse Motion on Cyclic Fatigue Resistance of Two Single-File Nickel-Titanium Rotary Instruments
100
Influence of continuous phase viscosity on emulsification by ultrasound
101
Influence of continuous phase viscosity on emulsification by ultrasound
102
Influence of continuous plastic film mulching on yield, water use efficiency and soil properties of rice fields under non-flooding condition
103
Influence of continuous plastic film mulching on yield, water use efficiency and soil properties of rice fields under non-flooding condition
104
Influence of continuum damage mechanics on the Bree’s diagram of a closed end tube
105
Influence of continuum precipitates on intergranular fatigue crack growth of a P/M nickel-based superalloy
106
Influence of contrasting urban edges on the abundance of arboreal mammals: A study of squirrel gliders (Petaurus norfolcensis) in southeast Queensland, Australia
107
Influence of controllable variables on the composting process, kinetic, and maturity of Stevia rebaudiana residues
108
Influence of controlled lactic fermentation on growth and sporulation of Bacillus cereus in milk
109
Influence of controlled nucleation by ultrasounds on ice morphology of frozen formulations for pharmaceutical proteins freeze-drying
110
Influence of controlled pH on the activity of UDPG-pyrophosphorylase in Aureobasidium pullulans
111
Influence of controlled rolling condition on microstructure and mechanical properties of low carbon micro-alloyed steels
112
Influence of controlled-pH and uncontrolled-pH operations on recombinant benzaldehyde lyase production by Escherichia coli
113
Influence of convection and grain movement on globular equiaxed solidification
114
Influence of convection on mixed-layer evolution: comparison of two mixing parameterizations with buoys data in the Bay of Biscay
115
Influence of Convection on the Piston Effect
116
Influence of convective cooling on a disc brake temperature distribution during repetitive braking
117
INFLUENCE OF CONVECTIVE COOLING ON THE TEMPERATURE AND THERMAL STRESSES IN A FRICTIONALLY HEATED SEMISPACE
118
Influence of convective cooling on the temperature in a frictionally heated strip and foundation
119
Influence of convective heat transfer coefficient on the heating rate of materials with different thermal diffusivities Original Research Article
120
Influence of convective heat transfer modeling on the estimation of thermal effects in cryogenic cavitating flows
121
Influence of conventional and organic agricultural practices on the phenolic content in eggplant pulp: Plant-to-plant variation
122
Influence of convergence angle of tooth preparation on the fracture resistance of Y-TZP-based all-ceramic restorations
123
Influence of Converter and inverter on dynamic behavior of the GMAW process
124
Influence of CoO addition on phase separation and crystallization of glasses of the ZnO–Al2O3–SiO2–TiO2 system
125
Influence of CoO on stability of nonlinear electrical properties and dielectric characteristics in Pr6O11-based ZnO varistor ceramics
126
Influence of Cooking and Freeze-Thawing Cycles on Viscoelastic Properties of Vegetable Purees
127
Influence of cooking method on arsenic retention in cooked rice related to dietary exposure
128
Influence of cooking method on the nutrient composition of Spanish light lamb
129
Influence of cooking method on the nutrient composition of Spanish light lamb
130
Influence of cooking on the levels of bioactive compounds in Purple Majesty potato observed via chemical and spectroscopic means
131
Influence of cooling in liquid nitrogen on shape memory effect of CuZnAlMnNi alloy
132
Influence of cooling mode on the electrical properties and microstructure of Ba1.022−xSmxTiO3 ceramics sintered in a reducing atmosphere
133
Influence of cooling modes on purity of solid-state synthesized tetracalcium phosphate
134
Influence of cooling on the working parameters of GaAs detectors
135
Influence of cooling on the working parameters of GaAs detectors
136
Influence of cooling paths on microstructural characteristics and precipitation behaviors in a low carbon V–Ti microalloyed steel
137
Influence of cooling rate after homogenization on the flow behavior of aluminum alloy 7050 under hot compression
138
Influence of cooling rate and addition of lanthanum and cerium on formation of nanoporous copper by chemical dealloying of Cu15Al85 alloy
139
Influence of cooling rate and initial surface roughness on the residual stresses in chromia scales thermally grown on pure chromium
140
Influence of cooling rate and initial surface roughness on the residual stresses in chromia scales thermally grown on pure chromium
141
Influence of cooling rate and tempering on precipitation and hardness of vanadium microalloyed steel
142
Influence of cooling rate on microstructure of Ti–Nb alloy for orthopedic implants
143
Influence of cooling rate on phase formation in spray-formed H13 tool steel
144
Influence of cooling rate on residual stress profile in veneering ceramic: Measurement by hole-drilling
145
Influence of cooling rate on the development of multiple generations of γ′ precipitates in a commercial nickel base superalloy
146
Influence of cooling rate on the microstructure and ageing behavior of as-cast Al–Sc–Zr alloy
147
Influence of cooling rate on the microstructure and properties of a new wear resistant carbidic austempered ductile iron (CADI)
148
Influence of cooling rate on the precipitation microstructure in a medium strength Al–Zn–Mg alloy
149
Influence of cooling rate on the structure and formation of oxide scale in low carbon steel wire rods during hot rolling
150
Influence of cooling rate on zirconia/veneer interfacial adhesion
151
Influence of cooling speed on the microstructure and wear behaviour of hypereutectic Fe–Cr–C hardfacings
152
Influence of cooling type on airborne viable fungi
153
Influence of coordination modes of 4,4′-bipyridine and secondary bonds on the structural assembles: Syntheses, crystal structures and properties of two lead(II) 3-sulfobenzoate coordination polymers
154
Influence of copolymer composition of polylactide implants on cranial bone regeneration
155
Influence of copolymerisation on fracture behaviour of aliphatic polyketones
156
Influence of copper and lead on germination of three Mimosoideae plant species
157
Influence of copper and molybdenum on dry sliding wear behaviour of sintered plain carbon steel
158
Influence of copper as an alloying element on hydrogen environment embrittlement of austenitic stainless steel
159
Influence of copper catalyst on the mechanism of carbohydrate radicals generation in oxidized potato starch
160
Influence of copper chloride for the formation of aromatic compounds during polyethylene pyrolysis
161
Influence of copper chloride for the formation of aromatic compounds during polyethylene pyrolysis
162
Influence of copper concentration on the ESR spectrum of Cu2+ in CaO
163
Influence of copper content on structural features and performance of pre-reduced LaMn1-xCuxO3 (0≤x<1) catalysts for methanol synthesis from CO2/H2
164
Influence of copper crystal surface on the CVD growth of large area monolayer graphene
165
Influence of copper doping on chlorine adsorption and antibacterial behavior of MgO prepared by co-precipitation method
166
Influence of copper electroplating on high pressure hydrogen-storage behaviors of activated carbon fibers
167
Influence of copper fungicide residues on occurrence of earthworms in avocado orchard soils
168
Influence of Copper Ion Concentration and Electrical Conductivity of the Nutrient Solution on Phytophthora cinnamomi in Ivy grown in Ebb-and-Flow Systems
169
Influence of copper ions on thermoluminescence characteristics of CaF2–B2O3–P2O5 glass system
170
Influence of copper modifying additive on state of gold in zeolites
171
Influence of copper on sensor properties of tin dioxide films in H2S
172
Influence of copper on sensor properties of tin dioxide films in H2S
173
Influence of Copper Oxide Nanoparticle on Hematology and Plasma Biochemistry of Caspian Trout (Salmo trutta caspius), Following Acute and Chronic Exposure
174
Influence of copper precursors on the structure evolution and catalytic performance of Cu/HMS catalysts in the hydrogenation of dimethyl oxalate to ethylene glycol Original Research Article
175
Influence of copper species on silver grain size in Ag–CuO–SiO2 ternary nanocomposites
176
Influence of copper substitution on magnetic and electrical properties of MgCuZn ferrite prepared by microwave sintering method
177
Influence of copper(II) ions on the structure and properties of octodecyl propylenediamine vesicles
178
Influence of copper, manganese and pH on the growth and several enzyme activities in hycorrhizal fungus Amanita nuscaria
179
Influence of core content and friction ratio on properties of DREF-3 polyester yarns
180
Influence of core content and friction ratio on properties of DREF-3 polyester yarns
181
Influence of core current on magnetization processes in amorphous and nanocrystalline Fe73.5Cu1Nb3Si15.5B7 ribbons
182
Influence of core current on magnetization processes in amorphous and nanocrystalline Fe73.5Cu1Nb3Si15.5B7 ribbons
183
Influence of core materials on thermal properties of melamine–formaldehyde microcapsules
184
Influence of core stability exercise on lumbar vertebral instability in patients presented with chronic low back pain: A randomized clinical trial
185
Influence of core–edge coupling and impurities on the operation regimes of a fusion reactor
186
Influence of core-substitution on the ultrafast charge separation and recombination in arylamino core-substituted naphthalene diimides
187
Influence of corium oxidation on fission product release from molten pool Original Research Article
188
Influence of corm provenance and environmental condition on yield and apocarotenoid profiles in saffron (Crocus sativus L.)
189
Influence of corm provenance and environmental condition on yield and apocarotenoid profiles in saffron (Crocus sativus L.)
190
Influence of corn drying on its quality for the wet-milling process Original Research Article
191
Influence of corn hybrid, protease and methods of processing on in vitro gas production
192
Influence of corn silage supplementation before alfalfa grazing on ruminal environment in relation to the occurrence of frothy bloat in cattle
193
Influence of corn starch type in the rheological properties of a white sauce after heating and freezing
194
Influence of corn steep liquor and glucose on colonization of control and CCB (Cu/Cr/B)-treated wood by brown rot fungi
195
Influence of corona on the voltages induced by nearby lightning on overhead distribution lines
196
Influence of corona surface treatment on the properties of an artificial membrane used for Langerhans islets encapsulation: permeability and biocompatibility studies
197
Influence of coronary angioplasty on the progression of coronary atherosclerosis
198
Influence of coronary artery bypass grafting on heart rate turbulence parameters
199
Influence of coronary artery disease on structural deterioration of porcine bioprostheses,
200
Influence of coronary atherosclerotic remodeling on the mechanism of balloon angioplasty, ,
201
Influence of Coronary Computed Tomographic Angiography on Patient Treatment and Prognosis in Patients With Suspected Stable Angina Pectoris
202
Influence of coronary microvascular dysfunction on left ventricular contractile response to cathecholamine in dilated cardiomyopathy
203
Influence of coronary thrombus on outcome of percutaneous coronary angioplasty in the current era (the Mayo Clinic experience)
204
Influence of Coronavirus Disease 2019 on some Physiological Blood Parameters in Patients with Kidney Failure in Iraq
205
Influence of Corporate Reputation and Brand Personality on Customer Satisfaction and Loyalty in Communication Services
206
Influence of Corporate Taxpayers Knowledge on Tax Compliance Behaviour under Self-assessment System in Nigeria
207
Influence of correction for within-person variability in blood pressure on the prevalence, awareness, treatment, and control of hypertension
208
Influence of correlated disorder potentials on the levitation of current carrying states in the quantum Hall effect
209
Influence of correlation between interface profiles of thin absorptive films on light transmission
210
Influence of corrosion and creep on intergranular fatigue crack path in 2XXX aluminium alloys
211
Influence of corrosion and mechanical loads on advanced ceramic components
212
Influence of corrosion crack patterns on the rate of crack widening of RC beams
213
Influence of corrosion on the friction characteristics of the steel/concrete interface
214
Influence of corrugation geometry on the performance of structured packings: an experimental study
215
Influence of corrugation geometry on the substitute stiffness matrix of corrugated laminates
216
Influence of cortical bone thickness and implant length on implant stability at the time of surgery—clinical, prospective, biomechanical, and imaging study
217
Influence of corticosteroids and vitamin E deficiency on onset of radiation-induced cataract Original Research Article
218
Influence of Corymbia hybridisation on crown damage by three arthropod herbivores
219
Influence of CoSi on the electrochemical hydrogen storage properties of MgNi alloy
220
Influence of cosmic rays on chemical composition of the atmosphere: data analysis and photochemical modelling
221
Influence of co-solvent on dye solubility in supercritical carbon dioxide
222
Influence of cosolvent on solubilities of fatty acids and higher alcohols in supercritical carbon dioxide
223
Influence of co-solvents in the highly efficient selective monohydrolysis of a symmetric diester
224
Influence of cosolvents on the hydrophobic surface immobilization topography of Candida antarctica lipase B
225
Influence of cost consciousness and heuristic approach on online search performance: Austin, Jill Ph.D. dissertation, University of Western Ontario, 1991. (UMI Order Number AAC NN66310) Reviewed by Carol Tenopir, Professor, School of Library and Informati
226
Influence of Coster-Kronig transitions on the polarization of L-shell x rays induced by proton impact
227
Influence of cosurfactant on the behavior of structured emulsions under simulated intestinal lipolysis conditions
228
Influence of Coulomb scattering of electrons and holes between Landau levels on energy spectrum and collective properties of two-dimensional magnetoexcitons
229
Influence of coumarin on zinc electrodeposition
230
Influence of counter anions on the structures and magnetic properties of trinuclear Cu(II) complexes containing a μ3-OH core and Schiff base ligands
231
Influence of counter ions on the reverse osmosis through MFI zeolite membranes: implications for produced water desalination Original Research Article
232
Influence of counter material on friction and wear performance of PTFE–metal binary coatings
233
Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti–6Al–4V
234
Influence of counterbody material on wear of ta-C coatings under fretting conditions at elevated temperatures
235
Influence of counterface roughness on friction properties of engineering plastics for bearing applications
236
Influence of counter-ion concentration on properties of electrochemically generated poly-N-methylpyrrole (PNMPy/ClO4)
237
Influence of counterion type and diffusion on the primary electroviscous effect
238
Influence of countersurface materials on dry sliding performance of CuO/Y-TZP composite at 600 °C
239
Influence of coupled chemo-poro-thermoelastic processes on pore pressure and stress distributions around a wellbore in swelling shale
240
Influence of coupling agent chain lengths on interfacial performances of polyarylacetylene resin and silica glass composites
241
Influence of coupling on nonlinear waves localization
242
Influence of co-vapors on biogas filtration for fuel cells monitored with PTR-MS (Proton Transfer Reaction-Mass Spectrometry)
243
Influence of cover crop on water use and performance of vineyard in Mediterranean Portugal
244
Influence of Cover Factor on the Physical Properties of Woven Fabrics
245
Influence of coverage and adsorption orientation in the spectroscopy of methyl orange on silver colloids: Cl− effect
246
Influence of coverage in the surface-enhanced Raman scattering of cytosine and its methyl derivatives on metal colloids: chloride and pH effects
247
Influence of Cowpea Mottle Virus and Cucumber Mosaic Virus on the Growth and Yield of Six Lines of Soybean (Glycine Max L.)
248
Influence of Cr addition on the corrosion resistance and magnetic properties of amorphous Fe73.5Si13.5B9Nb3Cu1 in simulated industrial environments
249
Influence of Cr addition on the defect structure of Fe–Al alloys
250
Influence of Cr additions on corrosion resistance of Fe- and Co-based metallic glasses and nanocrystals in H2SO4
251
Influence of Cr alloying on the microstructure of thermally sprayed quasicrystalline Al–Cu–Fe coatings
252
Influence of Cr and Mn substitution on the structural and spectroscopic properties of doped haematite: α-Fe2−xMxO3 (0.0 ⩽ x < 0.50)
253
Influence of Cr content on the diffusive transport parameters and trapping of hydrogen in Fe alloys
254
Influence of Cr content on tribological properties of Ni3Al matrix high temperature self-lubricating composites
255
Influence of Cr deficiency on sintering character and properties of SOFC interconnect material La0.7Ca0.3Cr1−xO3−δ
256
Influence of Cr dopant on the microstructure and optical properties of ZnO nanorods
257
Influence of Cr interlayer on the structure and optical properties of Ag films on glass substrate by magnetron sputtering
258
Influence of Cr on the hydrogen storage properties of Ti-rich Ti–V–Cr alloys
259
Influence of Cr on the nucleation of primary Al and formation of twinned dendrites in Al–Zn–Cr alloys: Can icosahedral solid clusters play a role?
260
Influence of Cr upon hydrogen permeation in Ni3Al at low partial pressure of oxygen
261
Influence of Cr, Ti concentrations on oxidation and corrosion resistance of V–Cr–Ti type alloys
262
Influence of Cr23C6 carbides on dynamic recrystallization in hot deformed Nimonic 80a alloys
263
Influence of Cr2O3 on ZnO–Bi2O3–MnO2-based varistor ceramics
264
Influence of Cr2O3, LiF, CaF2 and TiO2 nucleants on the crystallization behavior and microstructure of glass-ceramics based on blast-furnace slag
265
Influence of Cr3+ ion on the structural, ac conductivity and magnetic properties of nanocrystalline Ni–Mg ferrite
266
Influence of Cr3+ substitution on the electrical and magnetic properties of Ni0.4Cuo.4Zno.2Fe204 nanoparticles
267
Influence of crack breathing model on nonlinear dynamics of a cracked rotor
268
Influence of crack fractal geometry on elastic–plastic fracture mechanics
269
Influence of crack initiation length on fracture behaviors of reinforced concrete
270
Influence of crack orientation on the ductile–brittle behavior in Fe–3 wt.% Si single crystals
271
Influence of crack speed on fracture energy in amorphous and rubber toughened amorphous polymers
272
Influence of crack tip constraint on void growth in ductile FCC single crystals
273
Influence of crack tip constraint on void growth in pressure sensitive plastic solids – I: 2D analysis
274
Influence of cracked concrete models on the nonlinear analysis of High Strength Steel Fibre Reinforced Concrete corbels
275
Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions
276
Influence of cracking on the diffusion properties of cement-based materials: Part I: Influence of continuous cracks on the steady-state regime
277
Influence of cracks generation on the structural and optical properties of GaN/Al0.55Ga0.45N multiple quantum wells
278
Influence of cracks on dynamic characteristics and stress intensity factor of gears
279
Influence of Cr-doping on the magnetic and electrical transport properties of Nd0.75Na0.25MnO3
280
Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings
281
Influence of creep on water pressure measured from borehole tests in the Meuse/Haute-Marne Callovo-Oxfordian argillites
282
Influence of crimp on 3D-woven fibre reinforced composites
283
Influence of criteria on the results of in vitro evaluation of microleakage
284
Influence of critical plasma spraying parameter (CPSP) on plasma sprayed Alumina–Titania composite coatings
285
Influence of critical surface defects and localized competition between anodic dissolution and hydrogen effects during stress corrosion cracking of a 7050 aluminium alloy
286
Influence of critical surface defects and localized competition between anodic dissolution and hydrogen effects during stress corrosion cracking of a 7050 aluminium alloy
287
Influence of CrN surface compound on the initial stages of high temperature oxidation of ferritic stainless steel
288
Influence of crop growth and structure on the risk of epidemics by Mycosphaerella graminicola (Septoria tritici) in winter wheat
289
Influence of Crop Growth Enhancer Bacteria on Yield and Essential Oil Content of Safflower (Carthamustinctorius L)
290
Influence of crop load on maximum daily trunk shrinkage reference equations for irrigation scheduling of early maturing peach trees
291
Influence of crop load on the expression patterns of starch metabolism genes in alternate-bearing citrus trees
292
Influence of crop management on eyespot development and infection cycles of winter wheat
293
Influence of crop residue management, cropping system and N fertilizer on soil N and C dynamics and sustainable wheat (Triticum aestivum L.) production
294
Influence of crop rotation and aggregate size on carbon dioxide production and denitrification
295
Influence of crop rotation and liming on greenhouse gas emissions from a semi-arid soil
296
Influence of cropping intensity on the production and properties of earthworm casts in a leucaena alley cropping system
297
Influence of cropping system on foot rot of winter wheat in France
298
Influence of cropping system on Fusarium head blight and mycotoxin levels in winter wheat
299
Influence of cropping system on harvest erosion under potato
300
Influence of cropping system on harvest erosion under potato
301
Influence of cropping system on sharp eyespot in winter wheat
302
Influence of cropping systems on soil biochemical properties in an arid rain-fed environment
303
Influence of crops, crop residues and manure on amino acid and amino sugar fractions of organic nitrogen in soil
304
Influence of cross-correlation between the chemical shift anisotropies of pairs of nuclei on multiple-quantum relaxation rates in macromolecules
305
Influence of crossflow ultrafiltration on membrane fouling and apple juice quality Original Research Article
306
Influence of cross-flow velocity on membrane performance during filtration of biological suspension
307
Influence of cross-head speed in orthodontic bond strength testing
308
Influence of crosshead speed on micro-tensile bond strength of two-step adhesive systems
309
Influence of cross-head speed on resin-dentin shear bond strength
310
Influence of cross-link density on the properties of ROMP thermosets
311
Influence of crosslinked polyethylene structure on wear of joint replacements
312
Influence of cross-linked potato starch treated with POCl3 on DSC, rheological properties and granule size
313
Influence of cross-linker concentration on the cross-linking of PDMS and the network structures formed
314
Influence of crosslinking agents on the pore structure of skin
315
Influence of Cross-Linking and Process Parameters on the Separation Performance of Poly(dimethylsiloxane) Nanofiltration Membranes
316
Influence of crosslinking density on the tribological behavior of norbornene-based polymeric materials
317
Influence of cross-linking monomer and hydrophobic styrene comonomer on stereoselective esterase activities of polymer catalyst imprinted with a transition-state analogue for hydrolysis of amino acid esters
318
Influence of crosslinking technique on the physical and transport properties of ethynyl-terminated monomer/polyetherimide asymmetric membranes
319
Influence of cross-rolling on the mechanical properties of an accumulative roll bonded aluminum alloy AA6014
320
Influence of cross-sectional area and aspect ratio of shaft on natural ventilation in urban road tunnel
321
Influence of cross-talk rejection procedures on two-neutron intensity interferometry
322
Influence of cross-talk rejection procedures on two-neutron intensity interferometry
323
Influence of crosswise non-homogeneity of particulate flow on residence time distribution in a continuous mixer
324
Influence of CRP, IL6, and TNFA Gene Polymorphisms on Circulating Levels of C-Reactive Protein in Mexican Adolescents
325
Influence of crude oil on the genesis of the Lanjiagou porphyry molybdenum deposit, western Liaoning Province, China
326
Influence of Crude Oil Type on Products Quality of the Atmospheric Distillation Unit by Applying Material Flow Cost Accounting Simulation: Part A
327
Influence of crude xylanase from Aspergillus niger FAS128 on the in vitro digestibility and production performance of piglets
328
Influence of Crumb Rubber Incorporated with Different Warm Mix Asphalt Additives on the Mechanical Performance of WMA Mixture
329
Influence of crustal aerosols on wet deposition at urban and rural sites in India
330
Influence of crustal cumulates on 210Pb disequilibria in basalts
331
Influence of crustal heterogeneity on normal fault dimensions and evolution: southern South Africa extensional system
332
Influence of CrxNy coatings deposited by magnetron sputtering on tool service life in wood processing
333
Influence of cryogenic treatment on load bearing ability of interference fitted assemblies
334
Influence of cryoprotectants glycerol and amides, combined with antioxidants on quality of frozen-thawed boar sperm
335
Influence of crystal and amorphous phase morphology on hydrolytic degradation of PLLA subjected to different processing conditions
336
Influence of crystal expansion/contraction on zeolite membrane permeation
337
Influence of crystal field potential on the spectroscopic parameters of SiO2·B2O3·PbO glass doped with Nd2O3
338
Influence of crystal form and morphological characteristics of CaCO3 particles on kinetic of combustion gases desulfurization
339
Influence of crystal morphology of 1H-1,2,4-triazole on anhydrous state proton conductivity of sulfonated bisphenol A polyetherimide based polyelectrolytes
340
Influence of crystal orientation on copper oxidation failure
341
Influence of crystal orientation on ECAP of aluminum single crystals
342
Influence of crystal orientation on hardness and nanoindentation deformation in ion-irradiated stainless steels
343
Influence of crystal orientation on the processing of copper single crystals by ECAP
344
Influence of crystal orientation on the thermomechanical fatigue behaviour in a single-crystal superalloy
345
Influence of crystal plane on the welding quality of YBCO bulk superconductor
346
Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)
347
Influence of crystal size on apatite (U¯Th)/He thermochronology: an example from the Bighorn Mountains, Wyoming
348
Influence of crystal size on apatite (U–Th)/He thermochronology: an example from the Bighorn Mountains, Wyoming
349
Influence of crystal structure on carrier transport in titanylphthalocyanine thin films
350
Influence of crystal structure on crack propagation under cyclic electric loading in lead–zirconate–titanate
351
Influence of crystal structure on the CoII diffusion behavior in the Zn1−xCoxO system
352
Influence of crystal tilt on solar irradiance of cirrus clouds
353
Influence of crystal-field perturbations on the room-temperature magnetic anisotropy of lanthanide complexes
354
Influence of crystalline diamond nanoparticles on diamond-like carbon friction behavior
355
Influence of crystalline phase and defects in the ZrO2 nanoparticles synthesized by thermal plasma route on its photocatalytic properties
356
Influence of crystalline phase volume fraction on the two-way shape memory effect in amorphous–crystalline Ti40.7Hf9.5Ni44.8Cu5 alloy
357
Influence of crystalline structure on the luminescence properties of terbium orthotantalates
358
Influence of crystalline volume fraction on the performance of high mobility microcrystalline silicon thin-film transistors
359
Influence of crystallinity and OH surface density on the photocatalytic activity of TiO2 powders
360
Influence of crystallinity on chromatic parameters of enamels coloured with malayaite pink pigments
361
Influence of crystallinity on CO gas sensing for TiO2 films
362
Influence of crystallinity on rheological properties of unfilled and particle-filled polycarbonates
363
Influence of crystallinity on the physico-chemical properties of SAPO-31 and hydroconversion of n-octane over Pt loaded catalysts Original Research Article
364
Influence of crystallinity on the structural and hydrogenation properties of Mg2X phases (X=Ni, Si, Ge, Sn)
365
Influence of crystallisation conditions on the large deformation rheology of inulin gels
366
Influence of crystallised igneous intrusions on fault nucleation and reactivation during continental extension
367
Influence of crystallite size and interface on the catalytic performance over the CeO2/CuO catalysts
368
Influence of crystallite size and lattice spacing on thermal conduction of polycrystalline copper deposited by solid particle impingement: Contribution of electron and phonon conduction
369
Influence of crystallitesʹ size on iron nitriding and reduction of iron nitrides in nanocrystalline Fe–N system
370
Influence of crystallizable solvent on the morphology and performance of P3HT:PCBM bulk-heterojunction solar cells
371
Influence of crystallization inside glass frit on seal stress in ceramic metal halide lamps
372
Influence of crystallization on corrosion resistance of Al86Ni6La6Cu2 amorphous alloy
373
Influence of crystallization on dielectric properties of PEO:LiTFSI polymer electrolyte
374
Influence of crystallization on the deformation behavior of Zr55Al10Ni5Cu30 bulk metallic glass in the supercooled liquid region
375
Influence of crystallization temperature on the morphologies of isotactic polypropylene single-polymer composite
376
Influence of crystallographic compatibility on residual strain of TiNi based shape memory alloys during thermo-mechanical cycling
377
Influence of crystallographic orientation and diameter on piezoelectric constant and Young׳s modulus of BaTiO3 nanobelts
378
Influence of crystallographic orientation on hydration of MgO single crystals
379
Influence of crystallographic orientation on the early stages of oxidation of polycrystalline titanium nitride
380
Influence of crystallographic structure on the humidity sensing properties of KCl-doped TiO2 nanofibers
381
Influence of crystal-orientation effects on pulse-shape-based identification of heavy-ions stopped in silicon detectors
382
Influence of crystal-orientation effects on pulse-shape-based identification of heavy-ions stopped in silicon detectors
383
Influence of Cs doping in spray deposited SnO2 thin films for LPG sensors
384
Influence of CS2 on the growth of carbon nanotubes
385
Influence of C-sources on the denitrification rate of a high-nitrate concentrated industrial wastewater
386
Influence of CTAB and SDS on the properties of oil-in-water nano-emulsion with paraffin and span 20/Tween 20
387
Influence of CTAB surfactant on the various properties of CdO nanoparticles and their application in field of dye degradation
388
Influence of cTni-R145G on ventricle cell contraction depends on β-adrenergic receptor stimulation
389
Influence of Cu addition on structure and hydrogen desorption characteristics of Ti0.16Zr0.05Cr0.22V0.57 alloy
390
Influence of Cu addition on the self-propagating high-temperature synthesis of Ti5Si3 in Cu–Ti–Si system
391
Influence of Cu additions on the mechanical and wear properties of NbN coatings
392
Influence of Cu admixtures on the crystallization of amorphous Fe75Si9B16
393
Influence of Cu and Nb on relaxation and crystallization of amorphous FeSiB(CuNb) wires
394
Influence of Cu and Ni on the Microstructure and Mechanical Properties of an HSLA Steel
395
Influence of Cu content on ageing behavior of AlSiMgCu cast alloys
396
Influence of Cu content on the cell biocompatibility of Ti–Cu sintered alloys
397
Influence of Cu Content on the Microstructure and Mechanical Properties of Cr-Cu-N Coatings
398
Influence of Cu doping and post-heat treatment on the microstructure, optical properties and photoluminescence features of sol–gel derived nanostructured CdS thin films
399
Influence of Cu electroplating solutions on boron carbon nitride (BCN) film
400
Influence of Cu metal on the domain structure and carrier mobility in single-layer graphene Original Research Article
401
Influence of Cu on microstructure and wear resistance of TiC/TiB/TiN reinforced composite coating fabricated by laser cladding
402
Influence of Cu on the properties of gadolinium-doped barium cerate
403
Influence of Cu substrate surface oxides and heating rates during reflow on melting point of Sn–3.5Ag solder
404
Influence of Cu substrate topography on the growth morphology of chemical vapour deposited graphene Original Research Article
405
Influence of Cu supplementation on toxic and essential trace element status in intensive reared beef cattle
406
Influence of Cu, Co and Ni cations incorporated in brucite-type layers on thermal behaviour of hydrotalcites and reducibility of the derived mixed oxide systems
407
Influence of Cu, Cr and C on the irradiation defect in Fe: A molecular dynamics simulation study
408
Influence of Cu2 + and Zn2 + as additives on crystallization kinetics and morphology of struvite
409
Influence of Cu2+ and Mg2+ on the growth and activity of Ni2+ adapted Thiobacillus ferrooxidans
410
Influence of Cu2+ concentration on the biohydrogen production of continuous stirred tank reactor
411
Influence of cubic crystal field on the magnetic susceptibility of defect-perovskite RTa3O9 (R=rare earth) Original Research Article
412
Influence of cuff muscle fatty degeneration on anatomic and functional outcomes after simple suture of full-thickness tears
413
Influence of Cu-liquid content on densification and microstructure of direct laser sintered submicron W–Cu/micron Cu powder mixture
414
Influence of cultivar and osmotic dehydration time on aroma profiles of muskmelon (Cucumis melo, cv reticulatus Naud.) spheres Original Research Article
415
Influence of cultivar, storage and cooking on the mechanical properties of winter squash (Cucurbita maxima)
416
Influence of cultivation and fertilization on total organic carbon and carbon fractions in soils from the Loess Plateau of China
417
Influence of cultivation background intensification on spring wheat productivity in the subtaiga zone of the Krasnoyarsk Territory, Russia
418
Influence of cultivation background intensification on spring wheat productivity in the subtaiga zone of the Krasnoyarsk Territory, Russia
419
Influence of cultivation conditions on xylose-to-xylitol bioconversion by a new isolate of Debaryomyces hansenii
420
Influence of cultivation methods on suspended solids and phosphorus concentrations in surface runoff on clayey sloped fields in boreal climate
421
Influence of cultivation on the distribution of phosphorus in three soils from NE Scotland and their aggregate size fractions
422
Influence of cultivation site and fertilisation on the properties of condensed tannins and in vitro ruminal nutrient degradation of Calliandra calothyrsus, Flemingia macrophylla and Leucaena leucocephala
423
Influence of cultural conditions on sensitivity of brewing yeasts growth to Fusarium mycotoxins zearalenone, deoxynivalenol and fumonisin B1
424
Influence of cultural factors on landscapes of mountainous farm villages in western Japan
425
Influence of culture and environmental conditions on the composition of exopolysaccharide produced by Agrobacterium radiobacter
426
Influence of culture conditions on biofilm formation by Escherichia coli O157:H7
427
Influence of Culture Conditions on Cellulase Production by Streptomyces Sp. (Strain J2)
428
Influence of culture conditions on Escherichia coli O157:H7 biofilm formation by atomic force microscopy
429
Influence of culture conditions on Escherichia coli O157:H7 biofilm formation by atomic force microscopy
430
Influence of culture conditions on Escherichia coli O157:H7 biofilm formation by atomic force microscopy
431
Influence of culture conditions on the production of lipase of Hendersonula toruloidea
432
Influence of culture media on the recovery of psychrotrophic Clostridium spp. associated with the spoilage of vacuum-packed chilled meats
433
Influence of culture medium growth variables on Ganoderma lucidum exopolysaccharides structural features
434
Influence of culture pH on survival of Lactobacillus reuteri subjected to freeze-drying
435
Influence of Cumin and Thyme Aqueous Extracts on the Activity of some Starter Cultures
436
Influence of cumulus cells on in vitro fertilization of bovine oocytes derived from in vitro maturation
437
Influence of CuO addition to BaSm2Ti4O12 microwave ceramics on sintering behavior and dielectric properties
438
Influence of CuO nanoparticles in enhancing the thermal conductivity of water and monoethylene glycol based nanofluids
439
Influence of CuO on the formation and coexistence of 3CaO•SiO2 and 3CaO•3Al2O3•CaSO4 minerals
440
Influence of CuO/ZnO/Al2O3 wash-coating slurries on the steam reforming reaction of methanol
441
Influence of CuOx additives on CO oxidation activity and related surface and bulk behaviours of Mn2O3, Cr2O3 and WO3 catalysts Original Research Article
442
Influence of Curcumin Supplementation on Exercise-Induced Oxidative Stress
443
Influence of curcumin-loaded cationic liposome on anticancer activity for cervical cancer therapy
444
Influence of cure via network structure on mechanical properties of a free-radical polymerizing thermoset
445
Influence of Curing Age and Mix Composition on Compressive Strength of Volcanic Ash Blended Cement Laterized Concrete
446
Influence of curing condition and precracking time on the self-healing behavior of Engineered Cementitious Composites
447
Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive
448
Influence of curing conditions on the durability-related performance of concrete made with selected plastic waste aggregates
449
Influence of curing conditions on the mechanical performance of concrete containing recycled plastic aggregate
450
Influence of curing conditions on the morphologies of a PMMA-modified epoxy matrix
451
Influence of curing methods and concentration of NaOH on strength of the synthesized alkaline activated ground slag-ultrafine palm oil fuel ash mortar/concrete
452
Influence of curing modes on crosslink density in polymer structures
453
Influence of curing on durability performance of concrete
454
Influence of curing on durability performance of concrete
455
Influence of curing protocol on selected properties of light-curing polymers: Degree of conversion, volume contraction, elastic modulus, and glass transition temperature
456
Influence of curing schedule on the integrity of geopolymers
457
Influence of curing temperature on the optical properties of fluorinated polyimide thin films
458
Influence of curing temperature, silica nanoparticles- and cerium on surface morphology and corrosion behaviour of hybrid silane coatings on mild steel
459
Influence of Curing Time and Water Content on Unconfined Compressive Strength of Sand Stabilized Using Epoxy Resin
460
Influence of Curing Time and Water Content on Unconfined Compressive Strength of Sand Stabilized Using Epoxy Resin
461
Influence of curing time on the chloride penetration resistance of concrete containing rice husk ash: A technical and economical feasibility study
462
Influence of current annealing, stress, torsion and dc magnetic field on Matteucci effect in amorphous wires
463
Influence of current annealing, stress, torsion and dc magnetic field on Matteucci effect in amorphous wires
464
Influence of current densities in SOFC and PEFC stacks on a SOFC–PEFC combined system
465
Influence of current density on crystalline structure and magnetic properties of electrodeposited Co-rich CoNiW alloys
466
Influence of current density on microstructure of pulse electrodeposited tin coatings
467
Influence of Current Density on Morphology of Electrochemically Formed Porous Silicon
468
Influence of current density on refractive index of p-type nanocrystalline porous silicon
469
Influence of current intensity and heat input in Metal Inert Gas-brazed joints of TRIP 800 thin zinc coated steel plates
470
INFLUENCE OF CURRENT PULSES ON THE PROPERTIES AND STRUCTURE OF LOW-CARBON AND LOW-ALLOY STEELS
471
Influence of current redistribution on quench propagation velocity in Rutherford cable Original Research Article
472
Influence of current transformer saturation on line current differential protection algorithms
473
Influence of curriculum reform: An analysis of student mathematics achievement in Mainland China
474
Influence of curvature dynamics on pulsatile coronary artery flow in a realistic bifurcation model
475
Influence of curvature geometry of laminated FRP composite panels on delamination damage in adhesively bonded lap shear joints
476
Influence of curvature on the onset of autoignition in a corrugated counterflow mixing field
477
Influence of Curvature Radius on Mechanical Behavior of Extruded 6061-T6 Aluminum in Roll Bending
478
Influence of curvature-dependent channel walls on MHD peristaltic flow of viscous fluid with Hall currents and Joule dissipation
479
Influence of curved delamination front on toughness of multidirectional DCB specimens
480
Influence of curved flange-to-web connection on the transverse load resistance of extruded or hot-rolled I girders
481
Influence of cut-out hole on multi-layer Kevlar-29/epoxy composite laminated plates
482
Influence of cutting and management regimes on fodder galega for forage and seed production
483
Influence of Cutting Collection Time, IBA Concentration and Dipping Time on Vegetative Propagation of Native Saudi Arabian Grape
484
Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools
485
Influence of Cutting Conditions on Surface and Sub-Surface Quality of High Speed Dry End Milling Ti-6Al-4V
486
Influence of cutting conditions scaling in the machining of semiconductors crystals with single point diamond tool
487
Influence of cutting edge radius on cutting forces in machining titanium
488
Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts
489
Influence of cutting height and plant spacing on Sesbania (Sesbania aegyptiaca [Poir]) productivity under hyper-arid conditions in El-kharga Oasis, El-Wadi El-Gaded, Egypt
490
Influence of Cutting Position with IBA Hormone for Different Dipping Times on Rooting of Cassia tree Cassia surattensis Burm. Stem Cuttings
491
Influence of cutting tool coatings on the tribological phenomena at the tool–chip interface in orthogonal dry turning
492
Influence of CVD diamond film textures on the electrical response of radiation detectors
493
Influence of CVD diamond film textures on the electrical response of radiation detectors
494
Influence of CVI treatment of carbon fibers on the electromagnetic interference of CFRC composites
495
INFLUENCE OF CYANIDE ON SOME ANTIOXIDANT ENZYMES OF FRESHWATER FISH, CIRRHINUS MRIGALA (HAMILTON)
496
Influence of cyanine dye structure on self-aggregation and interaction with nucleic acids: A kinetic approach to TO and BO binding
497
Influence of cycle capacity deterioration and storage capacity deterioration on Li-ion batteries used in mobile phones
498
Influence of cycle time on kinetic behaviors of steady-state aerobic granules in sequencing batch reactors
499
Influence of cycles of high and low turbulent shear on the growth rate and equilibrium size of mud flocs
500
Influence of cyclic fatigue in water on the load-bearing capacity of dental bridges made of zirconia
501
Influence of cyclic freeze-thaw on the mobilization of LNAPL and soluble oil in a porous media
502
Influence of cyclic frequency on oxidation behavior of K38 superalloy with yttrium additions at 1 273 K
503
Influence of cyclic guanosine 3’,5’ monophosphate modulators on muscle contraction of rat aortas
504
Influence of Cyclic Loading on Inhomogeneous Deformation Behavior Arising in NiTi Shape Memory Alloy Plate
505
Influence of cyclic loads below endurance limit or threshold stress intensity on fatigue damage in cast aluminium alloy 319-T7
506
Influence of cyclic organosilicon precursors on the corrosion of aluminium coated sheet by atmospheric pressure dielectric barrier discharge
507
Influence of cyclic phase transitions on some properties of the ferroelectric perovskites
508
Influence of cyclic strain and decorin deficiency on 3D cellularized collagen matrices
509
Influence of cyclic strain on life of a PVD TBC
510
Influence of cyclic strain on life of a PVD TBC
511
Influence of cyclic strain rate on environmentally assisted cracking behavior of pressure vessel steel in high-temperature water
512
Influence of cyclic strain rate on environmentally assisted cracking behavior of pressure vessel steel in high-temperature water
513
Influence of cyclic temperature changes on the microstructure of AISI 4140 after laser surface hardening Original Research Article
514
Influence of cycling current and power profiles on the cycle life of lead/acid batteries
515
Influence of cycling frequency on cyclic creep characteristics of nickel base single-crystal superalloy
516
Influence of cycling frequency on cyclic creep characteristics of nickel base single-crystal superalloy
517
Influence of cycling frequency on the adherence of chromia scales formed on pure chromium at high temperature
518
Influence of cycling on the nature of the positive active mass of lead/acid batteries and effect of CaSO4 on the behaviour of the positive plates
519
Influence of cyclodextrines on effective mobilities of metabolically important purines and pyrimidines
520
Influence of cyclodextrins on the physical stability of DPPC-liposomes
521
Influence of cylinder pressure on the balancing of a rotary compressor
522
Influence of cylindricity and surface modification on load bearing ability of interference fitted assemblies
523
Influence of CYP1A1*2C on High Triglyceride Levels in Female Mexican Indigenous Tarahumaras
524
Influence of CYP2D6 polymorphisms on symptomatology and side-effects of patients with schizophrenia in Malaysia
525
Influence of Cypermethrin on DNA and RNA Content in Different Organs of Fresh Water Fish Cyprinus carpio
526
Influence of cysteine adsorption on the performance of CdSe quantum dots sensitized solar cells
527
Influence of cysteine and methionine availability on protein peroxide scavenging activity and phenolic stability in emulsions
528
Influence of Cytochrome P450 (CYP) 3A4*1G on Lipid-Lowering Efficacy of Atorvastatin among Critically Ill Cardiac Egyptian Patients
529
Influence of cytochrome P450 CYP2C9 genotypes in lung cancer risk
530
Influence of cytotoxic T lymphocyte antigen-4 (CTLA-4) gene polymorphisms in periodontitis
531
Influence of Czochralski silicon crystal growth on wafer quality: an extensive investigation using traditional and new characterization techniques
532
Influence of dairy manure addition on the biological and thermal kinetics of composting of greenhouse tomato plant residues
533
Influence of dairy Penicillium spp. on nutrient content of citrus fruit peel1
534
Influence of dairy products consumption on oral cancer risk: A meta-analysis
535
Influence of damage and texture evolution on limit strain in biaxially stretched aluminum alloy sheets
536
Influence of damage and texture evolution on limit strain in biaxially stretched aluminum alloy sheets
537
Influence of damage caused by Kr ions and neutrons on electrical properties of silicon detectors
538
Influence of damage caused by Kr ions and neutrons on electrical properties of silicon detectors
539
Influence of damage in the acoustic emission parameters
540
Influence of damage in the vicinity of a crack-tip in embossed low-basis-weight paper
541
Influence of damage on inhomogeneous deformation behavior of amorphous glassy polymers. Modeling and algorithmic implementation in a finite element setting
542
Influence of damage on the tensile behaviour of pure aluminium reinforced with ≥40 vol. pct alumina particles Original Research Article
543
Influence of damage rate on physical and mechanical properties and swelling of 18Cr–9Ni austenitic steel in the range of 3 × 10−9 to 4 × 10−8 dpa/s
544
Influence of damaged area on lamb wave propagation in composite plate
545
Influence of damaging and wilting red clover on lipid metabolism during ensiling and in vitro rumen incubation
546
Influence of damped propagation of dopant on the static and frequency-dependent third nonlinear polarizability of quantum dot
547
Influence of damping on the delta-kicked harmonic oscillator with Heaviside kick
548
Influence of damping on the excitation of the double giant resonance
549
Influence of damping systems on building structures subject to seismic effects
550
Influence of dark matter on light propagation in solar system Original Research Article
551
Influence of Data Acquisition Environment on Accuracy of Acoustic Voice Quality Measurements
552
Influence of data pre-processing on the quantitative determination of the ash content and lipids in roasted coffee by near infrared spectroscopy
553
Influence of data pre-processing on the quantitative determination of the ash content and lipids in roasted coffee by near infrared spectroscopy Original Research Article
554
Influence of daylight on potential biodegradation of diesel and crude oil in Antarctic seawater
555
Influence of dc magnetron sputtering parameters on surface morphology of indium tin oxide thin films
556
Influence of DCD and DMPP on soil N dynamics after incorporation of vegetable crop residues
557
Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method
558
Influence of deadwood on density of soil macro-arthropods in a managed oak–beech forest
559
Influence of deagglomeration and carboxymethyl cellulose binders on rheological behaviour of kaolin suspensions
560
Influence of De-blossoming and GA3 Application on Fruit Drop and Growth of Winter Guava
561
Influence of debonding in ground heat exchangers used with geothermal heat pumps
562
Influence of Debris Accumulation on Material Removal and Surface Roughness in Micro Ultrasonic Machining of Silicon
563
Influence of Debris Impact on Progressive Collapse of a Steel Structure Building
564
Influence of declivitous secondary air on combustion characteristics of a down-fired 300-MWe utility boiler
565
Influence of decomposition of roots of tropical forage species on the availability of soil nitrogen
566
Influence of decomposition of roots of tropical forage species on the availability of soil nitrogen
567
Influence of decompression rate on fragmentation processes: An experimental study
568
Influence of decoupling effect on stellar wind variability
569
Influence of decreased solvent permittivity on the structure and magnesium(II)-binding properties of the catalytic domain 5 of a group II intron ribozyme
570
Influence of deep brain stimulation surgery on the initiation of gait in Parkinsonʹs disease
571
Influence of deep cryogenic treatment on internal friction behavior in the process of tempering
572
Influence of deep cryogenic treatment on microstructure and evaluation by internal friction of a tool steel Original Research Article
573
Influence of deep fat frying on some nutritional parameters of novel food based on mushrooms and fresh soft cheese
574
Influence of Deep Hypothermia on the Tolerance of the Isolated Cardiomyocyte to Ischemia–Reperfusion
575
Influence of deep level defects on the performance of crystalline silicon solar cells: Experimental and simulation study
576
Influence of deep level impurities on the conductance technique for the determination of series resistance of a Schottky contact
577
Influence of deep levels on space charge density at different temperatures in γ-irradiated silicon
578
Influence of deep levels on space charge density at different temperatures in γ-irradiated silicon
579
Influence of deep-fat frying process on phospholipid molecular species composition of Sardina pilchardus fillet
580
Influence of deep-seated gravitational slope deformations on landslide distributions: A statistical approach
581
Influence of defects and band offsets on carrier transport mechanisms in amorphous silicon/crystalline silicon heterojunction solar cells
582
Influence of defects on fatigue crack propagation in laser hybrid welded eccentric fillet joint
583
Influence of defects on fatigue strength and failure mechanisms in the VHCF-region for quenched and tempered steel and nodular cast iron
584
Influence of defects on strength of industrial aluminum alloy Al–Si 319
585
Influence of Defects on the External Crystal Surface on Molecular Uptake into MFI-Type Zeolites
586
Influence of defects on the optical and structural properties of Ge dots embedded in an Si/Ge superlattice
587
Influence of defects on the phase-boundary movement in a stage transformation of lithium-graphite intercalation compounds Original Research Article
588
Influence of deficit irrigation and kaolin particle film on grape composition and volatile compounds in Merlot grape (Vitis vinifera L.)
589
INFLUENCE OF DEFICIT IRRIGATION AND PARTIAL DRY OF ROOT ZONE ON SQUASH CROP YIELD AND WATER USE EFFICIENCY
590
Influence of deficit irrigation during growth stages on water use efficiency (wue) and production of wheat cultivars under field conditions
591
Influence of deficit irrigation in phase III of fruit growth on fruit quality in ‘lane late’ sweet orange
592
Influence of deficit irrigation on growth, yield and yield parameters of cotton–maize cropping sequence
593
Influence of Deficit Irrigation on Water Use Efficiency and Bird Pepper Production (Capsicum annuum L.)
594
Influence of deficit irrigation strategies on fatty acid and tocopherol concentration of almond (Prunus dulcis)
595
Influence of deficit irrigation timing on the fruit quality of grapefruit (Citrus paradisi Mac.)
596
Influence of Deficit Irrigation Using Saline Water on Yield of Tomato under Two Irrigation Systems
597
Influence of deflection on a fold-to-fault progression: field evidence from near Marietta, South Carolina
598
Influence of Defoliate Pathotype of Verticillium dahliae on Some Physiological and Biochemical Characteristics of Chrysanthemum (Dendranthema grandiflorum (Ramat.) Kitam)
599
Influence of defoliation as a source restriction factor and late-season water stress on grain corn (Zea mays L.)
600
Influence of defoliation on CO2 efflux from soil and microbial activity in a Mediterranean grassland
601
Influence of deforestation on the mercury air/soil exchange in the Negro River Basin, Amazon
602
Influence of deformation ageing treatment on microstructure and properties of aluminum alloy 2618
603
Influence of deformation induced ferrite transformation on grain refinement of dual phase steel
604
Influence of deformation induced ferrite transformation on grain refinement of dual phase steel
605
Influence of deformation level on microstructure and creep behavior of GH4169 alloy
606
Influence of deformation on the hydrogen behavior in iron and nickel base alloys: a review of experimental data
607
Influence of deformation on the hydrogen behavior in iron and nickel base alloys: a review of experimental data
608
Influence of Deformation on Transformation of Low-Carbon and High Nb-Containing Steel During Continuous Cooling Original Research Article
609
Influence of deformation parameters on grain size of AlSi1Mg alloy in forging
610
Influence of deformation path on the strain hardening behavior and microstructure evolution in low SFE FCC metals
611
Influence of deformation sequence of monotonic tests on behaviour of CuSi3.5 bronze
612
Influence of deformation temperature on shape memory effect of Fe–Mn–Si–Ni–Cr alloy
613
Influence of deformation temperature on shape memory effect of Fe–Mn–Si–Ni–Cr alloy
614
Influence of deformation temperature on the ferrite grain refinement in a low carbon Nb–Ti microalloyed steel
615
Influence of deformation twinning on static annealing of AZ31 Mg alloy Original Research Article
616
Influence of deformation variables on the formation of copper-type shear bands in Al–1Mg Original Research Article
617
Influence of degradation at the base of a support post in a collapse of an old guardrail: A forensic analysis
618
Influence of degree of dehydroxylation on the pozzolanic activity of metakaolin
619
Influence of degree of hydrolysis on functional properties, antioxidant activity and ACE inhibitory activity of peanut protein hydrolysate
620
Influence of degree of intercalation on the crystal growth kinetics of poly[(butylene succinate)-co-adipate] nanocomposites
621
Influence of degree of mass recovery and heat regeneration on adsorption refrigeration cycles
622
Influence of degree of methyl methacrylate polymerization on spectroscopic properties of ethyl 5-(4-aminophenyl)- and 5-(4-dimethylaminophenyl)-3-amino-2,4-dicyanobenzoate
623
Influence of degree of molar etherification on critical liquid crystal behavior of hydroxypropyl chitosan
624
Influence of degree of polymerization of ammonium polyphosphate on anti-aging property of waterborne fire resistive coatings
625
Influence of degree of saturation on the borehole sealing performance of an expansive cement grout
626
Influence of dehulling and roasting process on the thermodynamics of moisture adsorption in sesame seed Original Research Article
627
Influence of dehulling of rape seeds on chemical composition of meal
628
Influence of dehulling pretreatment on physicochemical properties of Gleditsia sinensis Lam. gum
629
Influence of dehydrated nanotubed titanic acid on charge transport and luminescent properties of polymer light-emitting diodes with fluorescent dye
630
Influence of dehydration on the desert moss in molecular mobility and membrane fluidity monitored by spin label
631
Influence of de-icing agents on the viscoelastic properties of asphalt mastics
632
Influence of Dekkera bruxellensis on the contents of anthocyanins, organic acids and volatile phenols of Dمo red wine
633
Influence of delamination on fatigue properties of a fibreglass composite
634
Influence of delamination on impact damage in composite structures
635
Influence of delay on survival in patients with breast cancer: a systematic review
636
Influence of delayed addition time of sodium sulfanilate phenol formaldehyde condensate on the hydration characteristics of sulfate resisting cement pastes containing silica fume
637
Influence of delayed compaction on the compressibility and hydraulic conductivity of soil–lime mixtures
638
Influence of Delayed Feeding on the Performance, Development and Response of Immune System to Newcastle Disease Vaccination in Chickens
639
Influence of delayed viral production on viral dynamics in HIV-1 infected patients
640
Influence of deleting some of the inputs and outputs on efficiency status of units in DEA
641
Influence of delignification efficiency with alkaline peroxide on the digestibility of furfural residues for bioethanol production
642
Influence of Delivery Delay on Quality of Some Promising Sugar Cane Varieties under Aswan Condition
643
Influence of demagnetization effect on giant magneto-impedance of soft ferromagnetic metal
644
Influence of demographic, physiologic, and psychosocial variables on adherence to a yearlong moderate-intensity exercise trial in postmenopausal women
645
Influence of demographics and inhalation injury on burn mortality in children
646
Influence of demulsifier on interfacial film between oil and water
647
Influence of denitrification on suspended solids and phosphorus removal in multimedia filters
648
Influence of dense stands of an exotic tree, Prosopis glandulosa Benson, on a savanna dung beetle (Coleoptera: Scarabaeinae) assemblage in southern Africa Original Research Article
649
Influence of dense surface meteorological data assimilation on the prediction accuracy of ozone pollution in the southeastern coastal area of the Korean Peninsula
650
Influence of density stratification on effluent plume dynamics*
651
Influence of Dental Alloys and an All-Ceramic Material on Cell Viability and Interleukin-1beta Release in a Three-Dimensional Cell Culture Model
652
Influence of dental carcass maturity on carcass traits and meat quality of Nellore bulls
653
Influence of dental occlusion on physical fitness decline in a healthy Japanese elderly population
654
Influence of dentin cavity surface finishing on micro-tensile bond strength of adhesives
655
Influence of dentin pre-treatment with NaOCl on the morphology of adhesive interface of self-etching adhesive systems
656
Influence of Dentin Priming with Tannin-Rich Plant Extracts on the Longevity of Bonded Composite Restorations
657
Influence of denture improvement on the nutritional status and quality of life of geriatric patients
658
Influence of denture treatment on brain function activity
659
Influence of de-oiled seed cakes on seedling performance of East Indian Rosewood(Dalbergia latifoila Roxb.)
660
Influence of Deontological and Teleological Factors on Research Ethics Evaluations
661
Influence of deoxynivalenol on feed consumption by dairy cows
662
Influence of depigmentation of pearl millet (Pennisetum glaucum L.) on sensory attributes, nutrient composition, in vitro protein and starch digestibility of pasta
663
Influence of deposit formation on corrosion at a straw-fired boiler
664
Influence of deposited metal structures on the failure mechanisms of silicon-based components
665
Influence of Deposition and Annealing Temperature on Resistivity and Nanoindentation Characteristics of Reactive Magnetic Sputtered NiO Films
666
Influence of deposition atmosphere on photocatalytic activity of TiO2/SiOx double-layers prepared by RF magnetron sputtering Review Article
667
Influence of deposition conditions on electrical and mechanical properties of Sm2O3-doped CeO2 thin films prepared by EB-PVD (+IBAD) methods. Part 1: Effective relative permittivity
668
Influence of deposition conditions on mechanical and tribological properties of nanostructured TiN/CNx multilayer films
669
Influence of deposition conditions on the microstructure of Al-based coatings for applications as corrosion and anti-permeation barrier
670
Influence of deposition conditions on the microstructure of oxides thin films
671
Influence of deposition conditions on the optical properties of erbium-doped yttrium oxide films grown by aerosol–UV assisted MOCVD
672
Influence of deposition current density on the composition and properties of electrodeposited Ni + RuO2 and Ni + IrO2 composites
673
Influence of deposition parameters and annealing treatment on the properties of GZO films grown using rf magnetron sputtering
674
Influence of deposition parameters on hard Cr–Al–N coatings deposited by multi-arc ion plating
675
Influence of deposition parameters on microstructure and contamination of electrodeposited nickel coatings from additive-free sulphamate bath
676
Influence of deposition parameters on the dielectric properties of rf magnetron sputtered Ba(ZrxTi1−x)O3 thin films
677
Influence of deposition parameters on the structure and mechanical properties of nanocomposite coatings
678
Influence of deposition pressure and selenisation on damp heat degradation of the Cu(In,Ga)Se2 back contact molybdenum
679
Influence of deposition pressure on structural, optical and electrical properties of nc-Si:H films deposited by HW-CVD Original Research Article
680
Influence of deposition pressure on the composition and structure of carbon nitride films deposited by direct current plasma assisted pulsed laser ablation
681
Influence of deposition pressure on the structure and properties of fluorinated diamond-like carbon films prepared by RF reactive magnetron sputtering
682
Influence of deposition rate of LaF3 and annealing on the capacitance–voltage (C–V) characteristics of LaF3/Si heterostructures
683
Influence of deposition sequence on welding residual stress and deformation in an austenitic stainless steel J-groove welded joint
684
Influence of deposition temperature (Ts), air flow rate (f) and precursors on cathodoluminescence properties of ZnO thin films prepared by spray pyrolysis
685
Influence of deposition temperature and bias voltage on the crystalline phase of Er2O3 thin films deposited by filtered cathodic arc
686
Influence of deposition temperature and heat treatment on the performance of electroless Ni–B films
687
Influence of deposition temperature and time during PVD coating of CrN on corrosive wear in liquid aluminium
688
Influence of Deposition Temperature as a Reducing Agent on Synthesis of Reduced Graphene Oxide (RGO) Nanosheets
689
Influence of deposition temperature on morphological, optical, electrical and opto-electrical properties of highly textured nano-crystalline spray deposited CdO:Ga thin films
690
Influence of deposition temperature on the structural and morphological properties of Be3N2 thin films grown by reactive laser ablation
691
Influence of depression and effect of treatment with sertraline on quality of life after hospitalization for acute coronary syndrome
692
Influence of depression, expectation of therapy effectiveness, and self-efficacy on the treatment outcome in patients with multiple somatic symptoms (MSS)
693
Influence of depressive mood on the association of CRP and obesity in 3205 middle aged healthy men
694
Influence of depth of soil disturbance on root growth dynamics of wheat seedlings associated with Rhizoctonia solani AG-8 disease severity in sandy and loamy sand soils of Western Australia
695
Influence of Desamerization on the Quality of a Jam Based on Grapefruit
696
Influence of desertification on vegetation pattern variations in the cold semi-arid grasslands of Qinghai-Tibet Plateau, North-west China
697
Influence of desiccation on the sensitivity of Cronobacter spp. to lactoferrin or nisin in broth and powdered infant formula
698
Influence of design and bearing material on polyethylene wear particle generation in total knee replacement
699
INFLUENCE OF DESIGN AND OPERATING PARAMETERS ON SEPARATING THE COARSE WHEAT BRAN BY CYCLONE
700
Influence of design and process parameters on service life of nut hot forging die
701
Influence of design on bioactivity of novel CaSiO3–CaMg(SiO3)2 bioceramics: In vitro simulated body fluid test and thermodynamic simulation
702
Influence of design parameters on cogging torque in permanent magnet machines
703
Influence of design parameters on cup–stem orientations for impingement free RoM in hip implants
704
Influence of design parameters on seismic response of post-tensioned steel MRF systems
705
Influence of design parameters on seismic response of post-tensioned steel MRF systems
706
Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins
707
Influence of designer-assumed initial conditions on the numerical modelling of steel plate girders subjected to patch loading
708
Influence of desorption conditions before gas separation studies in nanocomposite MFI–alumina membranes
709
Influence of detachment layer thickness on style of thin-skinned shortening
710
Influence of detachment mechanisms on competition in biofilms
711
Influence of detachment on substrate removal and microbial ecology in a heterotrophic/autotrophic biofilm
712
Influence of detection methods on chloride threshold value for the corrosion of steel reinforcement
713
Influence of detector surface processing on detector performance
714
Influence of detector surface processing on detector performance
715
Influence of deterministic fluctuations on the 8-state Potts model Original Research Article
716
Influence of detonation gun sprayed alumina coating on AA 6063 samples under cyclic loading with and without fretting
717
Influence of deuterium on the design of the JET water detritiation system
718
Influence of Deuterium-Depleted Water on Hepatorenal Toxicity
719
Influence of Deuterium-Depleted Water on the Isotope D/H Composition of Liver Tissue and Morphological Development of Rats at Different Periods of Ontogenesis
720
influence of deuterium-depletedwater on hepatorenal toxicity
721
INFLUENCE OF DEVELOPMENT PHASE ON PRODUCTION CHARACTERISTICS OF LUCERNE IN ZETSKO-BJELOPAVLICKA VALLEY’S AGRO-ENVIRONMENTAL CONDITIONS
722
Influence of development stage of spring oilseed rape and spring wheat on interception of wet-deposited radiocaesium and radiostrontium
723
Influence of device engineering on the analog and RF performances of SOI MOSFETs
724
Influence of dew on biomass and photosystem II activity of cyanobacterial crusts in the Hopq Desert, northwest China
725
Influence of dew on biomass and photosystem II activity of cyanobacterial crusts in the Hopq Desert, northwest China
726
Influence of Dexamethasone Administration on Hematology, Biochemistry, and Thyroid Hormones in Dogs
727
Influence of dextran concentrations and molecular fractions on the rate of sucrose crystallization in pure sucrose solutions Original Research Article
728
Influence of dextran, pullulan and gum arabic on the physical properties of frozen sucrose solutions
729
Influence of dextran-producing Weissella cibaria on baking properties and sensory profile of gluten-free and wheat breads
730
Influence of DGEBA crosslinking on Li+ ion conduction in poly(ethyleneimine) gels
731
Influence of diabetes and diabetes-gender interaction on the risk of death in patients hospitalized with congestive heart failure Original Research Article
732
Influence of diabetes mellitus on cervical intervertebral disc herniation
733
Influence of Diabetes Mellitus on Clinical Outcome in the Thrombolytic Er of Acute Myocardial Infarction
734
Influence of Diabetes Mellitus on Clinical Outcomes Following Primary Percutaneous Coronary Intervention in Patients With ST-Segment Elevation Myocardial Infarction
735
Influence of diabetes mellitus on early and late clinical outcomes in saphenous vein graft stenting
736
Influence of diabetes mellitus on early and late outcome after coronary artery bypass grafting
737
Influence of Diabetes Mellitus on Long-Term (Five-Year) Outcomes of Drug-Eluting Stents and Coronary Artery Bypass Grafting for Multivessel Coronary Revascularization
738
Influence of Diabetes Mellitus on Long-Term Survival in Systematic Off-Pump Coronary Artery Bypass Surgery
739
Influence of Diabetes Mellitus on Outcome in Patients Over 40 Years of Age With the Long QT Syndrome
740
Influence of diabetes on characteristics and outcomes in patients hospitalized with heart failure: A report from the Organized Program to Initiate Lifesaving Treatment in Hospitalized Patients with Heart Failure (OPTIMIZE-HF)
741
Influence of diabetes on characteristics and outcomes in patients hospitalized with heart failure: A report from the Organized Program to Initiate Lifesaving Treatment in Hospitalized Patients with Heart Failure (OPTIMIZE-HF)
742
Influence of diabetes on mortality and morbidity: off-pump coronary artery bypass grafting versus coronary artery bypass grafting with cardiopulmonary bypass
743
Influence of Diabetes on the Outcome of Acute Coronary Syndrome in Kuwait
744
Influence of diabetic treatment regimens on vitamin D metabolism in elderly patients
745
Influence of diagenesis on sedimentary δ15N in the Arabian Sea over the last 130 kyr
746
Influence of diagenetic processes in Thau lagoon on cadmium behavior and benthic fluxes
747
Influence of diagnostic classification on gender ratio in schizophrenia
748
Influence of diagonal web reinforcement on cyclic behavior of structural walls
749
Influence of Dialysis Duration, Peritoneal Transport Parameters, and Gender on Effluent CA125 Concentration in Patients on Peritoneal Dialysis
750
Influence of diameter in the Raman spectra of aligned multi-walled carbon nanotubes Original Research Article
751
Influence of diameter of carbon nanotubes mounted in flow-through capacitors on removal of NaCl from salt water
752
Influence of diameter on particle transport in a fractured shale saprolite
753
Influence of diamino acid derivatives of protoporphyrin IX on mouse immunological system: Preliminary results
754
Influence of diamond characteristics on the tribological behaviour of metals against diamond-coated Ti–6Al–4V alloy
755
Influence of diamond particles content on the critical load for crack initiation and fracture toughness of SiOC glass–diamond composites
756
Influence of diamond powder particles on human gene expression
757
Influence of diamond pressing process on corrosion resistance in steel
758
Influence of diamond pressing process on corrosion resistance in steel
759
Influence of diatomite addition on membrane fouling and performance in a submerged membrane bioreactor
760
Influence of diatoms on copepod reproduction. II. Uncorrelated effects of diatom-derived α,β,γ,δ-unsaturated aldehydes and polyunsaturated fatty acids on Calanus helgolandicus in the field
761
Influence of diborane on the growth rate and phase stability of diamond films Original Research Article
762
Influence of DIC hydrothermal process conditions on the gelatinization properties of standard maize starch Original Research Article
763
INFLUENCE OF DIE ANGLES ON THE MICROHARDNESS OF ALUMINUM ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
764
Influence of die geometric parameters on plastic flow of layer composites during extrusion process
765
Influence of die pressure on relaxation characteristics of briquetted biomass
766
Influence of diel biogeochemical cycles on carbonate equilibrium in a karst river
767
Influence of dielectric and sorption properties on drying behaviour and energy efficiency during microwave convective drying of selected food and non-food inorganic materials Original Research Article
768
Influence of dielectric barrier discharge atmosphere on polylactic acid (PLA) surface modification
769
Influence of dielectric barrier materials to the behavior of dielectric barrier discharge plasma for CO2 decomposition
770
Influence of Dielectric Constant on Protonation Equilibria of L-Aspartic Acid in Acetonitrile- and Ethylene Glycol-Water Mixtures
771
Influence of dielectric core, embedding medium and size on the optical properties of gold nanoshells
772
Influence of dielectric fluctuation on light-scattering properties of random copolymers in bulk
773
Influence of dielectric function properties on the optical response of plasmon resonant metallic nanoparticles
774
Influence of dielectric properties on the heating rate in free-running oscillator radio frequency systems Original Research Article
775
Influence of dielectric relaxation times of fluid mixtures on solid/liquid interfacial tension
776
Influence of diesel concentration on the fate of phenanthrene in soil
777
Influence of diesel fuel on seed germination
778
Influence of diet and ambient temperature on bovine serum insulin-like growth factor-I and thyroxine: relationships with non-esterified fatty acids, glucose, insulin, luteinizing hormone and progesterone
779
Influence of diet and rearing system on heavy pig performance, carcass and meat quality
780
Influence of diet and sea ice drift on organochlorine bioaccumulation in Arctic ice-associated amphipods
781
Influence of diet and water supply on mineral content and pH within the large intestine of horses with enterolithiasis
782
Influence of diet complexity on productive performance and nutrient digestibility of weanling pigs
783
Influence of diet enriched with green tea on innate humoral and cellular immune response of kelp grouper (Epinephelus bruneus) to Vibrio carchariae infection
784
Influence of diet on growth yields of rumen micro-organisms in vitro and in vivo: influence on growth yield of variable carbon fluxes to fermentation products
785
Influence of diet on growth, condition and reproductive capacity in Newfoundland and Labrador cod (Gadus morhua): Insights from stable carbon isotopes (δ13C)
786
Influence of diet on long-term cold storage of the predator Podisus maculiventris (Say) (Heteroptera: Pentatomidae)
787
Influence of diet on proximate composition and fatty acid profile in common carp (Cyprinus carpio)
788
Influence of diet on proximate composition and fatty acid profile in common carp (Cyprinus carpio)
789
Influence of Diet on the Shedding of Candida glabrata by Experimentally Infected Preweaned Calves
790
Influence of diet patterns on fuelwood consumption in Kenyan boarding schools and implications for data and energy policies
791
Influence of diet restriction on NMDA receptor subunits and learning during aging
792
Influence of diet supplementation with yeast culture (Saccharomyces cerevisiae) on performance of Zaraibi goats
793
Influence of dietary algal N-3 fatty acids on breeding induced inflammation and endometrial cytokine expression in mares bred with frozen semen
794
Influence of dietary antioxidants and fatty acids on neutrophil mediated bacterial killing and gene expression in healthy Beagles
795
Influence of dietary antioxidants and fatty acids on neutrophil mediated bacterial killing and gene expression in healthy Beagles
796
Influence of dietary arginine on sexual dimorphism of arginine metabolism in mice
797
Influence of Dietary Aspirin on Growth Performance, Antioxidant Status, and Mortality due to Ascites in Broiler Chickens
798
Influence of Dietary Bacillus Sp. Fermented Shrimp Waste on Broiler Meat Quality
799
Influence of dietary beet pulp on caecal VFA, experimental colibacillosis and iota-enterotoxaemia in rabbits
800
Influence of dietary benzoic acid addition on nutrient digestibility and selected biochemical parameters in fattening rabbits
801
Influence of dietary buffers on the growth rate and some blood constituents of sheep
802
Influence of Dietary Calcium on Chlordecone-Induced Biochemical Changes in Serum of Rat
803
Influence of Dietary Capsaicin on Redox Status in Red Blood Cells During Human Aging
804
Influence of dietary catechols on the growth of enteropathogenic bacteria
805
Influence of dietary cobalt on performance, nutrient digestibility and plasma metabolites in lambs
806
INFLUENCE OF DIETARY COBALT ON PERFORMANCE, NUTRIENT DIGESTIBILITY AND RUMEN ACTIVITY IN LAMBS
807
Influence of dietary components associated with high or low risk of colon cancer on apoptosis in the rat colon
808
Influence of dietary components on Aspergillus niger prolyl endoprotease mediated gluten degradation
809
Influence of dietary conjugated linoleic acid (CLA) and age at slaughtering on performance, slaughter- and meat quality, lipoproteins, and tissue deposition of CLA in barrows
810
Influence of dietary conjugated linoleic acid (CLA) and age at slaughtering on performance, slaughter- and meat quality, lipoproteins, and tissue deposition of CLA in barrows
811
Influence of dietary conjugated linoleic acid on volatile profiles, color and lipid oxidation of irradiated raw chicken meat
812
Influence of dietary conjugated linoleic acids (CLA) and age at slaughtering on meat quality and intramuscular collagen in rabbits
813
Influence of dietary conjugated linoleic acids and vitamin E on meat quality, and adipose tissue in rabbits
814
Influence of dietary creatine monohydrate and carcass cooling rate on colour characteristics of pork loin from different pure breeds
815
Influence of Dietary Energy and Protein Intake on Yield and Composition of Milk in Crossbred Dairy Cows
816
Influence of dietary energy level on the production of breeding ostriches
817
Influence of dietary fat on pork eating quality
818
Influence of dietary fat on the enantioselective disposition of 2,2′,3,3′,6,6′-hexachlorobiphenyl (PCB 136) in female mice
819
Influence of Dietary Fat on the Intestinal Absorption of Lipophilic Compounds in Goldfish (Carassius auratus)
820
Influence of dietary fat on the nutrient intake and growth of children from 1 to 5 y of age: the Special Turku Coronary Risk Factor Intervention Project
821
Influence of dietary fat sources on growth, bacterial resistance, and antioxidant ability of liver in common carp, Cyprinus carpio
822
Influence of dietary fat type on benzo(a)pyrene [B(a)P] biotransformation in a B(a)P-induced mouse model of colon cancer
823
Influence of dietary fat, on fatty acid composition and sensory properties of dry-cured Parma ham
824
Influence of Dietary Fermented Tapioca By-Products on the Performance of Broilers and Ducklings
825
Influence of Dietary Fiber Levels on Feed Utilization and Growth Performance in Poultry
826
Influence of dietary fish oil supplementation on humoral immune response and some selected biochemical parameters of broiler chickens
827
Influence of dietary ginger (Zingiber officinales Rosc) on oxidative stress induced by malathion in rats
828
Influence of Dietary Glutamine Supplementation on Growth Performance, Small Intestinal Morphology, Immune Response and Some Blood Parameters of Broiler Chickens
829
Influence of dietary glycosaminoglycans and Bifidobacterium longum in the gliadin-mediated inflammatory response(s) of intestinal epithelial cells (Caco-2)
830
Influence of dietary inclusion level of manganese on pork quality during retail display
831
Influence of dietary inorganic and organic copper salt and level of soybean oil on plasma lipids, metabolites and mineral balance of broiler chickens
832
Influence of dietary inorganic and organic form of copper salt on performance, plasma lipids and nutrient utilization of Black Bengal (Capra hircus) goat kids
833
INFLUENCE OF DIETARY INTAKE AND PHYSICAL ACTIVITY ON ANNUAL RHYTHM OF HUMAN BLOOD CHOLESTEROL CONCENTRATIONS
834
Influence of Dietary L-Carnitine on Productive Performance, Internal Organs and Carcass Characters of Two Duck Breeds Reared for Foie Gras Production
835
Influence of dietary lipid sources on carcass traits of broilers
836
Influence of dietary lipid sources on sensory characteristics of broiler meat
837
Influence of dietary lysine level, pre-slaughter fasting, and rendement napole genotype on fresh pork quality
838
Influence of Dietary Moringa oleifera Leaf Meal on Haematological Parameters, Serum Biochemical Indices and Weight of Internal Organs of Chickens
839
Influence of dietary nitrogen sources with different ruminal degradability on growth performance of Comisana ewe lambs
840
Influence of dietary nucleotides on growth performance and stress resistance in Kutum (Rutilus kutum Kamenskii, 1901)
841
Influence of dietary nutritional composition on caterpillar salivary enzyme activity
842
Influence of dietary oils and protein level on pork quality. 1. Effects on muscle fatty acid composition, carcass, meat and eating quality
843
Influence of dietary oils and protein level on pork quality. 2. Effects on properties of fat and processing characteristics of bacon and frankfurter-style sausages
844
Influence of dietary partially hydrogenated fat high in trans fatty acids on lipid composition and function of intestinal brush border membrane in rats
845
Influence of dietary phenolic acids on redox status of iron: Ferrous iron autoxidation and ferric iron reduction
846
Influence of dietary plant oils on mammary lipogenic enzymes and the conjugated linoleic acid content of plasma and milk fat of lactating goats
847
Influence of dietary polyunsaturated fatty acids on contractility, lusitropy and compliance of isolated rat myocardium
848
Influence of dietary prebiotic mixture (α-mune) on growth performance, haematology and innate immunity of Beluga sturgeon (Huso huso) juvenile
849
Influence of dietary protected lipids on intake and digestibility of straw based diets in Deccani sheep
850
INFLUENCE OF DIETARY PROTEIN LEVELS ON PRODUCTION RESULTS AND MORTALITY IN PHEASANTS REARED UNDER CONTROLLED CONDITIONS
851
Influence of dietary protein/lipid ratio on growth performance and body composition of Aspikutum, a new hybrid of Leuciscus aspius ♀ × Rutilus frisii ♂ (Teleostei: Cyprinidae)
852
Influence of dietary restraint and environmental factors on meal size in normal-weight women. A laboratory study
853
Influence of dietary rumen-degradable protein on bacterial growth in the rumen of sheep receiving different energy sources
854
Influence of dietary rumen-degradable protein supply on rumen characteristics and carbohydrate fermentation in beef cattle offered high-grain diets
855
Influence of dietary salt intake on the response of isolated perfused mesenteric veins of the dog to vasoactive agents
856
Influence of Dietary Saturated Fat Intake on Endothelial Fibrinolytic Capacity in Adults
857
Influence of dietary selenium and vitamin E on quality of veal
858
Influence of dietary selenium supplementation and exercise on thiol-containing enzymes in mice
859
Influence of dietary simulating solvents on the hardness of provisional restorative materials
860
Influence of dietary soy isoflavones on the accessory sex organs of the Wistar rat
861
Influence of Dietary Supplementation of Guava Leaf, Oxytetracycline, and Tert‐Butylhydroxytoluene on Growth Performance, Gut Microbial Population, Immune Status, Carcass, and Meat Quality in Broiler Chickens
862
Influence of Dietary Supplementation of Kigelia pinnata and Plukenetia conophora Leaves on Cytokine Expression, Immunoglobulins, Blood Chemistry, Caecal Microbiota and Meat Quality in Broiler Chickens
863
Influence of dietary supplementation of Rosmarinus officinalis L. on performances of dairy ewes organically managed
864
Influence of dietary supplementation with linseed and vitamin E on fatty acids, α-tocopherol and lipid peroxidation in muscles of broiler chicks
865
Influence of Dietary Supplementation with Selenium on Blood Metabolic Profile and Thyroid Hormones Activities in Fattening Lambs
866
Influence of Dietary Thyme Extract (Thymus vulgaris) on Performance, Purine Derivatives, Cellulase Activity and Ruminal Fermentation Parameters in Fattening Lambs and Goat Kids
867
Influence of dietary vitamin C and selenium, alone and in combination, on the composition and oxidative stability of meat of broilers
868
Influence of dietary Vitamin E level on egg production of broiler breeders, and on the growth and immune response of progeny in comparison with the progeny from eggs injected with Vitamin E
869
Influence of dietetic linoleic versus oleic fatty acid in LDL-c/APOB ratio
870
Influence of diethyl zinc on ethylene-norbornene copolymerization
871
Influence of diets enriched with different vegetable oils on the fatty acid profiles of snail Helix aspersa maxima
872
Influence of diets enriched with flaxseed oil on the α-linolenic, eicosapentaenoic and docosahexaenoic fatty acid in Nile tilapia (Oreochromis niloticus)
873
Influence of diets with cereal grains contaminated by graded levels of two Fusarium toxins on selected enzymatic and histological parameters of liver in gilts
874
Influence of difference in chemical compositions of rice straw on hydrogen formation in nickel-catalyzed steam gasification
875
Influence of Difference System Parameters on Operating Conditions of Third Harmonic Ground-Fault Protection System of Unit-Connected Generator
876
Influence of differences in porous structure within granules of activated carbon on adsorption of aromatics from aqueous solutions Original Research Article
877
Influence of differences in sensitivity of Spanish and German consumers to perceive androstenone on the acceptance of boar meat differing in skatole and androstenone concentrations
878
Influence of different additives on the synthesis of VO2 polymorphs
879
Influence of different aerobic pretreatments on the kinetics of anaerobic digestion of olive mill wastewater
880
Influence of different agricultural practices (type of crop, form of N-fertilizer) on soil nitrous oxide emissions
881
Influence of different Agrobacterium rhizogenes strains on hairy roots induction and secondary metabolites production in Datura innoxia Mill.
882
Influence of different amount of functionalized bulky gold nanorods dopant on the electrooptical, dielectric and optical properties of the FLC host
883
Influence of different amounts of FeCl3 on decomposition and hydrogen sorption kinetics of MgH2
884
Influence of different amounts of irrigation water on salt leaching and cotton growth under drip irrigation in an arid and saline area
885
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
886
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
887
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
888
Influence of different anesthetic and analgesic methods on early cognitive function of elderly patients receiving non-cardiac surgery
889
Influence of different annealing conditions on the luminescent properties of Li2B4O7:Mn single crystals Original Research Article
890
Influence of different annealing temperatures and cooling rates on amorphous and crystalline composite coating
891
Influence of different approaches for calculating the athleteʹs mechanical energy on energetic parameters in the pole vault
892
Influence of different aspect ratio additives on the performance of lead–acid batteries
893
Influence of different atmospheric models and seeing effects on the nonlinear calibration Original Research Article
894
Influence of different autotransfusion devices on the quality of salvaged blood
895
Influence of different bentonites on the rare earth element concentrations of clarified Romanian wines
896
Influence of different biological environments on the stability of serotonin detection on carbon-based electrodes
897
Influence of different biomaterials on the viability of Aggregatibacter actinomycetemcomitans
898
Influence of Different Bonding Agents and Composite Resins on Fracture Resistance of Reattached Incisal Tooth Fragment
899
Influence of different bonding agents on the color stability of enamel after orthodontic bracket removal
900
Influence of different buffer gases on synthesis of few-layered graphene by arc discharge method
901
Influence of different buffer solutions on the performance of anodic Pt-Ru/C nanoparticle electrocatalysts for a direct methanol fuel cell
902
Influence of different carbon nanostructures on the electrocatalytic activity and stability of Pt supported electrocatalysts
903
Influence of different carbon nanotubes on the electrical and mechanical properties of melt mixed poly(ether sulfone)-multi walled carbon nanotube composites
904
Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – A comparative study
905
Influence of different catalyst deactivation models in a validated simulator of an industrial UOP FCC unit with high-efficiency regenerator
906
Influence of different cellular transcription factors on the regulation of Varicella-zoster virus glycoproteins E (gE) and I (gI) UTR’s activity
907
Influence of different chemical cross-linking treatments on the properties of bovine pericardium and collagen
908
Influence of different chemical elements on irradiation-induced hardening embrittlement of RPV steels
909
Influence of different chemical reagents on the preparation of activated carbons from bituminous coal
910
Influence of Different Cleaning Conditions on Cleaning Performance of Pilot-Scale Pulse-Jet Baghouse
911
INFLUENCE OF DIFFERENT CO2 LEVELS ON THE GROWTH AND COMPETITION OF SOME IMPORTANT WEEDS IN WHEAT (Triticum aestivum L.)
912
Influence of different coffee drink preparations on ochratoxin A content and evaluation of the antioxidant activity and caffeine variations
913
Influence of different collagen species on physico-chemical properties of crosslinked collagen matrices
914
Influence of Different Colored Plastic Mulch on the Growth of Lettuce (Lactuca sativa)
915
Influence of different colour pigments on the properties of powder deposited organic coatings
916
Influence of different combinations of aluminum and iron electrode on electrocoagulation efficiency: Application to the treatment of paper mill wastewater Original Research Article
917
Influence of different concentrations of Al2(SO4)3 and anionic polyelectrolytes on tannery wastewater flocculation Original Research Article
918
Influence of different concentrations of disodium fumarate on methane production and fermentation of concentrate feeds by rumen micro-organisms in vitro
919
Influence of different concentrations of N-phenylaminopropyl – POSS on the thermodynamic fragility of the cured epoxy resin
920
Influence of different concentrations of Sildenafil Citrate on histological parameters of mice epididymis
921
Influence of different condylar and incisal guidance ratios to the activity of anterior and posterior temporal muscle
922
INFLUENCE OF DIFFERENT CONSTANT TEMPERATURE DEGREES AND HOST PLANTS ON CERTAIN BIOLOGICAL ASPECTS OF THE MELON LADYBIRD BEETLE Epilachna chrysomelina (F.) (COLEOPTERA: COCCINELLIDAE)
923
Influence of different cooling rates on the microstructure of the HAZ and welding CCT diagram of CLAM steel
924
Influence of different crosslinking treatments on the physical properties of collagen membranes
925
Influence of different cryotreatments on tribological behavior of 80CrMo12 5 cold work tool steel
926
Influence of different cultivars–locations on maximum daily shrinkage indicators: Limits to the reference baseline approach
927
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Shortterm Biomass Enrichment
928
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment
929
Influence of different decalcifying agents on EGF and EGFR immunostaining
930
Influence of different demineralization treatments on physicochemical structure and thermal degradation of biomass
931
Influence of different deposition potentials on morphology and structure of CdSe films
932
Influence of different design parameters and Al2O3-water nanofluid flow on heat transfer and flow characteristics of sinusoidal-corrugated channels
933
Influence of different dietary forages on the fatty acid composition of rumen digesta as well as ruminant meat and milk
934
Influence of Different Dietary Levels of Energy and Protein on Reproductive and Post Hatch Growth Performance in Japanese Quails
935
Influence of different dietary protein levels and feeding frequencieson growth performance and feed utilization of the Giant freshwater prawn, Macrobrachium rosenbergii with the Nile tilapia, Oreochromus niloticus in polyculture
936
Influence of different dietary vitamin C levels on vitamin E and C content and oxidative stability in various tissues and stored m. longissimus dorsi of growing pigs
937
Influence of different diluents in Pt/Al2O3 catalyst on the hydrogenation of benzene, toluene and o-xylene Original Research Article
938
INFLUENCE OF DIFFERENT DIRECTIONS AND LEVELS OF THE POMEGRANATE TREES ON THE WHITEFLY Siphoninus phillyreae (HAL.) AND ITS PARASITOID Encarsia inaron (WALK.) AT KAFER EL-SHEIKH GOVERNORATE, EGYPT
939
Influence of different doses of progesterone treatments on ovarian follicle status in beef cows
940
Influence of different dry milling processes on the properties of an attapulgite clay, contribution of inverse gas chromatography
941
Influence of different drying methods on carotenoids and capsaicinoids of paprika (Cv., Jalapeno)
942
Influence of different edible coatings in minimally processed pumpkin (Cucurbita moschata Duch)
943
Influence of different electrolysis parameters on electrodeposition of γ- and α-Mn from pure electrolytes — a review with special reference to Russian language literature
944
Influence of different emission sources on atmospheric organochlorine patterns in Germany
945
Influence of different endodontic filling materials on root fracture susceptibility
946
Influence of different exchange correlation potentials on band structure and optical constant calculations of ZrGa2 and ZrGe2 single crystals
947
Influence of different excitation spectra on the measured carrier lifetimes in quasi-steady-state photoconductance measurements
948
Influence of different extraction methods on the yield and linalool content of the extracts of Eugenia uniflora L.
949
Influence of different factors in milk production on standard plate count of raw small ruminant’s bulk-tank milk in Switzerland
950
Influence of different factors on the adsorption of carbofuran (2,3-dihydro-2,2-dimethyl-7-benzofuranyl-N-methyl carbamate) on soils Original Research Article
951
Influence of different factors on the inactivation of Salmonella senftenberg by pulsed electric fields
952
Influence of different factors on the output power transferred into medium by ultrasound
953
Influence of different factors on the output power transferred into medium by ultrasound
954
Influence of different factors on the phase transitions of non-ionic Langmuir monolayers
955
Influence of different factors on the stability of biodiesel: A review
956
Influence of Different Factors on the Stiffness and Strength of Multilayer Composite Elements
957
Influence of different feeding systems on the growth performance and muscle development of Japanese Black steers
958
Influence of different fibre sources in diets for growing pigs on chemical composition of faeces and slurry and ammonia emission from slurry
959
Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance
960
Influence of different fillers on phenolic resin abrasive composites. Comparison of inverse gas chromatographic and dynamic mechanical–thermal analysis characteristics
961
Influence of different floor management strategies of the vineyard on the natural yeast population associated with grape berries
962
Influence of Different Foaming Conditions on the Mechanical, Physical, and Structural Properties of Polypropylene Foam
963
Influence of Different Forms of Plantain (Plantago lanceolata L.) Herb on Performance, Serum Metabolites, and Meat Quality of Broilers
964
Influence of different gas compositions on the short-term storage stability of mother-packaged retail-ready lamb packs
965
Influence of different gas compositions on the short-term storage stability of mother-packaged retail-ready lamb packs
966
Influence of different gel complexes on flavour and colour change in Chongcai paste during storage
967
influence of different genders of japanese quail on the functional state of kidneys
968
Influence of Different Genders of Japanese Quail on the Functional State of Kidneys
969
Influence of Different Genders of Japanese Quail on the Functional State of Kidneys
970
Influence of different growth and nucleation times on optical spectra of precipitated oxygen in silicon
971
Influence of different growth parameters and related conditions on 6H-SiC crystals grown by the modified Lely method
972
Influence of different growth parameters and related conditions on 6H-SiC crystals grown by the modified Lely method
973
Influence of different heat treatment parameters on microstructure and mechanical properties of C–Mn strapping quality steels
974
Influence of Different Heating Systems on the Bioavailable Fractions of Some Elements in House Dust
975
Influence of different host plant cultivars on nutritional indices of Plutella xylostella (Lepidoptera: Plutellidae)
976
Influence of different host plants on the biological characteristics of the seychellarum mealybug icerya seychellarum (westwood)
977
Influence of different hydrocarbons on the structure of CVD- and PACVD-TiCx hard layers
978
Influence of different hydrocarbons on the structure of CVD- and PACVD-TiCx hard layers
979
Influence of different hydrocolloids on major wheat dough components (gluten and starch) Original Research Article
980
Influence of different immobilization techniques for Candida cylindracea lipase on its stability and fish oil hydrolysis
981
Influence of different initial microstructure on the process of spheroidization in cold forging
982
Influence of different initial spore concentrations of Pasteuria penetrans on the infection of root-knot nematodes over three host crop cycles
983
Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content
984
Influence of different interlayers and bias voltage on the properties of a-C:H and a-C:H:Me coatings prepared by reactive d.c. magnetron sputtering
985
Influence of different ions doping on the antibacterial properties of MgO nanopowders
986
Influence of Different Irrigation Regimes on Carpogenic Germination of Sclerotia of Sclevotinia sclerotiorum
987
Influence of Different Irrigation Solutions and Instrumentation Techniques on the Amount of Apically Extruded Debris
988
Influence of different irrigation strategies in a traditional Cornicabra cv. olive orchard on virgin olive oil composition and quality
989
Influence of Different Isoforms of Recombinant Trophoblastic Interferons on Prostaglandin Production in Cultured Bovine Endometrial Cells
990
Influence of different land uses on soil nitrogen transformations after conversion from an Indian dry tropical forest
991
Influence of different layer microstructures induced by different gas compositions on corrosion behavior of plasma nitrided stainless steel
992
Influence of different levels of gypsum on growth, herb and essential oil yields of lemongrass
993
INFLUENCE OF DIFFERENT LEVELS OF PHOSPHORUS AND POTASSIUM ON GROWTH OF Leucaena leucocephala SEEDLINGS
994
INFLUENCE OF DIFFERENT LEVELS OF POTASSIUM ON GROWTH, YIELD AND QUALITY OF CANOLA (Brassica napus L.) CULTIVARS
995
Influence of different levels of traffic pollution on haemoglobin content in the earthworm Lumbricus terrestris
996
Influence of different light curing units on the cytotoxicity of various dental composites
997
Influence of different light sources on visual shade matching performance
998
Influence of different luting protocols on shear bond strength of computer aided design/computer aided manufacturing resin nanoceramic material to dentin
999
Influence of different maceration times on the anthocyanin composition of wines made from Vitis vinifera L. cvs. Boğazkere and Öküzgözü Original Research Article
1000
Influence of different make-up air configurations on the fire-induced conditions in an atrium
