<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Effect of steam explosion and enzymatic pre-treatments on pulping and bleaching of Hesperaloe funifera
2
Effect of steam explosion and microbial fermentation on cellulose and lignin degradation of corn stover
3
Effect of steam explosion on biodegradation of lignin in wheat straw
4
Effect of steam injection into two nearby layers
5
Effect of steam injection location on syngas obtained from an air–steam gasifier
6
Effect of steam injection on pore structure and distribution in coke samples produced by delayed coking☆
7
Effect of steam pretreatment on oil palm empty fruit bunch for the production of sugars
8
Effect of steam reforming on methane-fueled chemical looping combustion with Cu-based oxygen carrier
9
Effect of steam treatment on catalytic performance of HZSM-5 catalyst for ethanol dehydration to ethylene
10
Effect of steam treatment on photocurrent and dye–titania interaction in dye-doped titania gel
11
Effect of steam treatment on soluble phenolic content and antioxidant activity of the Chaga mushroom (Inonotus obliquus)
12
Effect of steaming on one-step oxidation of benzene to phenol with nitrous oxide over Fe/MFI catalysts Original Research Article
13
Effect of steaming on the catalytic performance of ZSM-5 zeolite in the selective oxidation of phenol by nitrous oxide
14
Effect of steaming time on surface roughness of beech veneer
15
Effect of Stearic Acid on Rheological Properties of 316L Feedstock for Metal injection Moulding
16
Effect of Stearic Acid on the Rheology and Moulding Behaviour of 316 L Stainless Steel Powder Using Thermoplastic Natural Rubber (TPNR) Binder
17
Effect of stearic acid, zinc stearate coating on the properties of synthetic hydromagnesite
18
Effect of steel and carbon fiber additions on the dynamic properties of concrete containing silica fume
19
Effect of steel and concrete coupling beams on seismic behavior of RC frame accompanied with coupled shear walls
20
Effect of steel ball diameter in the surface mechanical attrition treatment (SMAT) on microstructure, roughness, hardness and wear behavior of AZ31 magnesium alloy
21
Effect of steel collars on the seismic behaviour of axially-cracked historical stone columns
22
Effect of Steel Confinement on Behavior of Reinforced Concrete Frame
23
Effect of steel corrosion and loss of concrete cover on strength of deteriorated RC columns
24
Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes
25
Effect of steel fiber on the deicer-scaling resistance of concrete
26
Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete
27
Effect of Steel Fiber Ratios on Behavior of High Strength Hybrid Reinforced Concrete Deep Beams under Repeated Loading
28
Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites
29
Effect of Steel Fibers on the Behavior of Over-Reinforced Beams Subjected to Pure Torsion
30
Effect of steel fibers on the properties of recycled self-compacting concrete in fresh and hardened state
31
Effect of steel fibres on mechanical properties of high-strength concrete
32
Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete
33
Effect of steel microfibers on corrosion of steel reinforcing bars
34
Effect of steel wrapping jackets on the bond strength of concrete and the lateral performance of circular RC columns
35
Effect of steeping time and calcium hydroxide concentration on the water absorption and pasting profile of corn grits Original Research Article
36
EFFECT OF STEERING ERROR VECTOR AND ANGULAR POWER DISTRIBUTIONS ON BEAMFORMING AND TRANSMIT DIVERSITY SYSTEMS IN CORRELATED FADING CHANNEL
37
Effect of stem cell therapy on amiodarone-induced liver injury in albino rats
38
Effect of stem cell turnover rates on protection against cancer and aging
39
Effect of stem length on prosthetic radial head micromotion
40
Effect of Stenosis Severity on Wall Shear Stress Based Hemodynamic Descriptors using Multiphase Mixture Theory
41
Effect of Stent Implantation on Upstream Coronary Artery Compliance—A Cause of Late Plaque Rupture?
42
Effect of step free energy on delayed abnormal grain growth in a liquid phase-sintered BaTiO3 model system
43
Effect of step function-like perturbation on intermittent contact mode sensors: a response analysis
44
Effect of step geometry and water quality on effciency of cascade aeration
45
Effect of Step Length and Step Period on Walking Speed and Energy Consumption: a Parameter Study
46
Effect of step wise variation of oxygen potential during the isothermal sintering on the grain growth behavior in Cr2O3 doped UO2 pellets
47
Effect of Steps Height and Glass Cover Angle on Heat Transfer Performance for Solar Distillation: Numerical Study
48
Effect of stepwise replacement of LiF by ZnO on structural and optical properties of LiF.B2O3 glasses
49
Effect of stepwise seeding on the performance of four anaerobic biofilters treating a synthetic stillage waste
50
Effect of Sterculia quadrifida R. Br Stem Bark on Hematological Profile and Thrombopoietin Levels in DENV-3-infected Wistar Rats
51
Effect of stereochemistry of Δlac-acetogenins on the inhibition of mitochondrial complex I (NADH-ubiquinone oxidoreductase)
52
Effect of stereochemistry on the anti-HIV activity of chiral thiourea compounds Original Research Article
53
Effect of stereochemistry on the transport of Aca-linked β-turn peptidomimetics across a human intestinal cell line Original Research Article
54
Effect of steric congestion and non-covalent interaction on the self-organization of two isostructural 1D chiral coordination polymers
55
Effect of sterile tetracycline ophthalmic ointment as an adjuvant to mechanical debridement on the treatment of peri-implantitis: A randomized controlled clinical trial
56
Effect of sterilisation by gamma irradiation on the ability of polycaprolactone (PCL) to act as a scaffold material
57
Effect of sterilisation methods on the structural integrity of artificial enamel caries for intra-oral cariogenicity tests
58
Effect of sterilisation on dietary fibre and physicochemical properties of onion by-products
59
Effect of Sterilization (Autoclave) on Wear of Tungsten-Carbide Burs Coated With Diamond Particles With Different Thicknesses
60
Effect of sterilization by gamma radiation on nano-mechanical properties of teeth
61
Effect of sterilization method on properties of Palacos® R acrylic bone cement
62
Effect of sterilization on structural and material properties of 3-D silk fibroin scaffolds
63
Effect of sterilization on the structure and fatigue resistance of medical grade UHMWPE
64
Effect of sterilization process on surface characteristics and biocompatibility of pure Mg and MgCa alloys
65
Effect of steroid injections on the rotator cuff: An experimental study in rats
66
Effect of Steroid Milieu on Gonadotropin-Releasing Hormone-1 Neuron Firing Pattern and Luteinizing Hormone Levels in Male Mice
67
Effect of steroid therapy on saccule and semicircular canals function in patients with unilateral sudden sensorineural hearing loss
68
Effect of Steroidal Extract for Fenugreek Seeds on ICSH and SSH in Albino Male Mice
69
Effect of Steroidal Treatment in Asthma on Voice
70
Effect of sterol biosynthesis-inhibiting (SBI) fungicides on the fermentation rate and quality of young ale beer
71
Effect of sterols and fatty acids on growth and triglyceride accumulation in 3T3-L1 cells
72
Effect of stevia and citric acid on the stability of phenolic compounds and in vitro antioxidant and antidiabetic capacity of a roselle (Hibiscus sabdariffa L.) beverage
73
Effect of stevia sweetener consumption as non-caloric sweetening on body weight gain and biochemical’s parameters in overweight female rats
74
Effect of sticky mat usage in control of nosocomial infection in Motahary Burn Hospital
75
Effect of stiffening rings on buckling stability of R.C. hyperbolic cooling towers
76
Effect of stiffness and thickness ratio of host plate and piezoelectric patches on reduction of the stress concentration factor
77
Effect of stiffness and thickness ratios on popcorn cracking in IC packages
78
Effect of stiffness of building adjacent to excavation on deformation of the excavation wall
79
Effect of stiffness of multi-level hierarchical attachment system on adhesion enhancement
80
Effect of stiffness of multi-level hierarchical attachment system on adhesion enhancement
81
Effect of stiffness of multi-level hierarchical attachment system on adhesion enhancement
82
Effect of stiffness of polycaprolactone (PCL) membrane on cell proliferation
83
Effect of stilling basin shape on the hydraulic characteristics of the flow downstream radial gates
84
Effect of stimulating non-myelinated vagal axons on atrio-ventricular conduction and left ventricular function in anaesthetized rabbits
85
Effect of stimulation intensity on oxytocin release before, during and after machine milking
86
Effect of stimulation of an upper limb on motor evoked potentials in lower limb muscles to transcranial magnetic stimulation in normal subjects and patients with thalamic infarction
87
Effect of stimulatory and inhibitory drugs on uterine electrical activity measured noninvasively from the abdominal surface of pregnant rats
88
Effect of stimulus parameters and contraction level on inhibitory responses in human jaw-closing muscles: Implications for contingent stimulation
89
Effect of stimulus type and worry on physiological response to fear
90
Effect of stimulus-driven pruning on the detection of spatiotemporal patterns of activity in large neural networks
91
Effect of stirring and temperature on synthesis yield and crystallization of hydrothermally synthesized K2W4O13 nanorods
92
Effect of stirring energy upon the dynamic inversion hysteresis of emulsions
93
Effect of stirring on solidification pattern and alloy distribution during semi-solid-metal casting
94
Effect of stirring on striae in glass melts
95
Effect of stirring on the dissolution of coal fly ash and synthesis of pure-form Na-A and -X zeolites by two-step process
96
Effect of stirring rate on the microstructure and microhardness of Ni–CeO2 nanocomposite coating and investigation of the corrosion property
97
Effect of stirring time on size and dielectric properties of SnO2 nanoparticles prepared by co-precipitation method
98
Effect of stirring to produce ferric saccharide capsules with alginate coating
99
Effect of stitch density and stitch thread thickness on compression after impact strength and response of stitched composites
100
Effect of stitch density and stitch thread thickness on damage progression and failure characteristics of stitched composites under out-of-plane loading
101
Effect of stitch distribution on mode I delamination toughness of laminated DCB specimens
102
Effect of stitch on thermodynamic properties of sandwiched thermal protection structures
103
Effect of stitch spacing on mechanical properties of carbon/silicon carbide composites
104
Effect of stitches on the impact behaviour of graphite/epoxy composites
105
Effect of stitching and weave architecture on the high strain rate compression response of affordable woven carbon/epoxy composites
106
Effect of stitching angle on mechanical properties of stitched sandwich panels
107
Effect of stitching on Mode I strain energy release rate
108
Effect of Stitching on Plain and Open-hole Strength of CFRP Laminates
109
Effect of Stobadine on Carbon Tetrachloride-Induced Erythrocyte Membrane Changes in Rats
110
Effect of stobadine on rat offspring myocardial ultrastructure after prenatal phenytoin administration
111
Effect of stochastic perturbation on a two species competitive model
112
Effect of stochastic resonance whole body vibration on functional performance in the frail elderly: A pilot study
113
Effect of stochastically anisotropic morphology on the mechanical behavior of microbeams
114
Effect of stochasticity in the availability of pollinators on the resource allocation within a flower
115
Effect of stochasticity on targeted energy transfer from a linear medium to a strongly nonlinear attachment
116
Effect of stochasticity, capacity and lead time cost drivers on WIP and throughput in a pull production environment
117
EFFECT OF STOCHASTICS OF DIMENSIONAL PARAMETERS OF HAULING LAMINATED BUSHLESS CHAIN ELEMENTS OF IMPROVED STRUCTURE ON THEIR BEARING STRENGTH
118
Effect of stocking density and different feed on growth and survival of Mastacembelus armatus larvae
119
Effect of stocking density and group size on growth performance, carcass traits and meat quality of outdoor-reared rabbits
120
Effect of Stocking Density and Methionine Levels on Growth Performance and Immunity of Broiler Chicks
121
Effect of stocking density and probiotic dietary supplementation on growth performance, feed conversion and survival of postlarvae of the freshwater prawn (Macrobrachium rosenbergii)
122
Effect of stocking density and supplementation of potato peel (Solanum tuberosum L.) powder and extract on the physiological and immunological performance of Japanese quail, Coturnix coturnix japonica
123
Effect of stocking density in polyculture system on growth performance of cultured Fish and productivity in Earthen Ponds
124
Effect of stocking density of juvenile Bagrid catfish Chrysichthys nigrodigitatus (Siluriformes: Claroteidae) on growth performance, feed utilization, proximate composition and water quality
125
Effect of Stocking Density on Growth and Survival of Cage Reared Indian White Shrimp Penaeus Indicus (H. Milne Edwards) at Vellar Estuary
126
Effect of Stocking Density on Growth Performance, Survival and Production of Silver Pompano, Trachinotus blochii, (Lacépède, 1801) in Marine Floating Cages
127
Effect of stocking density on the expression of glucose transporter protein 1 and other physiological factors in the Lake Victoria Nile tilapia, Oreochromis niloticus (L.)
128
Effect of stocking density on water quality, plankton community structure, and growth performance of Litopenaeus vannamei post-larvae cultured in low-salinity biofloc system
129
Effect of stocking rate on the botanical composition and nutritive value of diets selected by West African dwarf goats maintained on researcher-managed and farmer-managed stylo fodder banks during the cropping season in Central Nigeria
130
Effect of Stoichiometric Composition and Different Metal Salts on the Phase Formation of Cerate-Zirconate Ceramics
131
Effect of stoichiometry and microstructure on hydrolysis in MoO3 films
132
Effect of stoichiometry and milling processes in the synthesis and the piezoelectric properties of modified KNN nanoparticles by solid state reaction
133
Effect of stoichiometry on hydrogen storage performance of Ti–Cr–VFe based alloys
134
Effect of Stone Cast Type on Complete Denture Base Adaptation
135
Effect of Stone Cast Type on Complete Denture Base Adaptation
136
Effect of stone filters in a pond–wetland system treating raw wastewater from a university campus Original Research Article
137
Effect of stone lines on soil chemical characteristics under continuous sorghum cropping in semiarid Burkina Faso
138
Effect of Stone Powder and Lime on Strength, Compaction and CBR Properties of Fine Soils
139
Effect of stone thickness on run-off water composition and derived damage functions in ambient exposure experiments
140
Effect of Stone–Wales and vacancy defects on elastic moduli of carbon nanotubes and their composites using molecular dynamics simulation
141
Effect of STOP Technique on Safety Climate in a Construction Company
142
Effect of storage and packaging on fatty acid composition and oxidation in dry fermented sausages made with added olive oil and antioxidants
143
Effect of storage and preservation methods on viability in transplantable human skin allografts
144
Effect of storage condition and aging on acrylic acid inverse emulsion surface-grafting polymerization of PET films initiated by atmospheric pressure plasmas
145
EFFECT OF STORAGE CONDITION AND PACKAGING MATERIAL ON INCIDENCE OF STORAGE FUNGI AND SEED QUALITY OF MAIZE GRAINS
146
Effect of storage conditions (relative humidity, duration, and temperature) on the germination time of Aspergillus carbonarius and Penicillium chrysogenum
147
Effect of Storage Conditions and Disinfection with 2% Deconex® on Dimensional Stability of Two Self-Cure Acrylic Resins
148
Effect of storage conditions and inclusion of milk on available lysine in infant cereals
149
Effect of storage conditions and packaging material on postharvest quality attributes of strawberry
150
Effect of storage conditions of soil on ecotoxicological assessment
151
Effect of storage conditions on calcium sulphate hemihydrate-containing products
152
Effect of Storage Conditions on DNA Quality of Primary Sex Organs
153
Effect of storage conditions on furosine formation in milk–cereal based baby foods
154
Effect of Storage Conditions on Germination in Wheat
155
Effect of storage conditions on lactate dehydrogenase released from perfused hearts
156
Effect of storage conditions on methanol content of fruit and vegetable juices
157
Effect of storage conditions on methanol content of fruit and vegetable juices
158
Effect of storage conditions on prothrombin time, activated partial thromboplastin time and fibrinogen concentration on canine plasma samples
159
Effect of storage conditions on the stability and fermentability of enzymatic lignocellulosic hydrolysate
160
EFFECT OF STORAGE CONDITIONS ON THE STABILITY OF ALBENDAZOLE AND OXYTETRACYCLINE VETERINARY PRODUCTS MARKETED IN SUDAN
161
Effect of storage conditions on the tensile properties of eco-friendly chitosan films by response surface methodology Original Research Article
162
Effect of storage conditions on the wall friction characteristics of three food powders Original Research Article
163
Effect of Storage Duration and Package Materials on Viability and Grain Chemical Composition of Two Bread Wheat Cultivars
164
Effect of storage duration on some physical properties of date palm (cv. Stamaran)
165
Effect of storage in juice with or without pulp and/or calcium lactate on the subsequent survival of Escherichia coli O157:H7 in simulated gastric fluid
166
Effect of Storage in the Fortified Probiotic Corn Flakes Prepared by
167
Effect of Storage Materials on Viability and Proximate Composition of Garcinia kola Heckel
168
Effect of Storage Media and Sterilization Method on Shear Bond Strength of Composite to Enamel of Extracted Teeth
169
Effect of Storage Media and Sterilization Method on Shear Bond Strength of Composite to Enamel of Extracted Teeth
170
Effect of storage media on the fluoride release and surface microhardness of four polyacid-modified composite resins (“compomers”)
171
Effect of storage method and extender osmolality in the quality of cryopreserved epididymal ram spermatozoa
172
Effect of Storage Method on Date Palm and Pistachio Pollen Viability
173
Effect of storage of chicken and turkey blood on the lymphocyte responses to concanavalin A and pokeweed mitogen
174
Effect of storage of chicken and turkey blood on the lymphocyte responses to concanavalin A and pokeweed mitogen
175
Effect of storage of immobilized cells at ambient temperature on volatile by-products during wine-making Original Research Article
176
Effect of storage of precursor polymer solution on the electronic and physical structure of Poly(p-phenylenevinylene)
177
Effect of storage of surfactant gels on the bread making quality of wheat flour
178
Effect of storage on amnesic shellfish poisoning (ASP) toxins in king scallops (Pecten maximus)
179
Effect of storage on biochemical and microbiological parameters of edible truffle species
180
Effect of storage on nonenzymatic browning of apple juice concentrates
181
Effect of Storage on Organoleptic Characteristics and Nutritional Evaluation of β -Carotene and Iron-Rich Products
182
Effect of Storage on Organoleptic Characteristics and Nutritional Evaluation of β -Carotene and Iron-Rich Products
183
Effect of storage on phytochemical contents of misai kucing (Orthosiphon stamineus Benth) leaves
184
Effect of storage on refined and husk olive oils composition: Stabilization by addition of natural antioxidants from Chemlali olive leaves
185
Effect of storage on resistant starch and amylose content of cereal–pulse based ready-to-eat commercial products
186
Effect of storage on resistant starch content of processed ready-to-eat foods
187
EFFECT OF STORAGE ON SOME PHYSICAL AND CHEMICAL PROPERTIES OF IRAKY BREAD
188
Effect of storage on tensile material properties of bovine liver
189
Effect of storage on the content of polyphenols, vitamin C and the antioxidant activity of orange juices
190
Effect of storage on the content of polyphenols, vitamin C and the antioxidant activity of orange juices
191
Effect of storage on the performance of methanogenic granules
192
Effect of storage on the phenolic content, volatile composition and colour of white wines from the varieties Zalema and Colombard
193
Effect of storage on the phytic acid content, total antioxidant capacity and organoleptic properties of macaroni enriched with cowpea flour Original Research Article
194
Effect of Storage on the Quality of Wheat and Maize Based Cookies
195
Effect of storage on the respirometric relationship between substrate utilization and microbial growth
196
Effect of storage on the selected properties of macaroni enriched with wheat germ Original Research Article
197
Effect of storage parameters on stability of Jatropha-derived biodiesel
198
Effect of storage period and egg weight on hatchability in Prelux- G chickens
199
Effect of storage period and strain of layer on internaland external quality characteristics of eggs marketedin Riyadh area
200
Effect of storage period and temperature on resistant starch and β-glucan content in cornbread
201
Effect of storage period and temperature on the chemical composition and organoleptic quality of frozen tomato cubes
202
Effect of Storage Period on Dimensional Stability of Alginplus and Hydrogum 5
203
Effect of Storage Period on Egg Weight Loss, Hatching Weight and Hatchability Percentage of Incubated Egyptian Balady Eggs
204
Effect of storage period on the dominant weathering processes of biodiesel and its blends with diesel in ambient conditions
205
Effect of storage period under variable conditions on the chemical and physical composition and colour of Spanish refrigerated orange juices
206
Effect of storage system and tarpaulin color on nutritional quality and digestibility of stored lucerne hay in the irrigated Sonoran Desert
207
Effect of storage temperature and gas permeability of packaging film on the growth of lactic acid bacteria and Brochothrix thermosphacta in cooked meat emulsions Original Research Article
208
Effect of Storage Temperature and Light on the FreezeDried Amino Acids from Sugar Beet and Sugar Cane Molasses
209
Effect of storage temperature and media composition on the survivability of Bifidobacterium breve NCIMB 702257 in a malt hydrolisate
210
Effect of Storage Temperature and Packaging Material on Shelf Life of Thornless Blackberry
211
Effect of storage temperature and sunlight exposure on the physicochemical properties of bottled water in Kurdistan region-Iraq
212
Effect of Storage Temperature and Time on Stability of Liver Enzymes in Blood Serum
213
Effect of storage temperature on cooking behaviour of rice
214
Effect of storage temperature on phenolics stability in hawthorn (Crataegus pinnatifida var. major) fruits and a hawthorn drink
215
Effect of Storage Temperature on Sensory and Microbial Quality of Rastrelliger kanagurta (Cuvier, 1816) from Andaman Coast
216
Effect of storage temperature on texture, polymorphic structure, bloom formation and sensory attributes of filled dark chocolate
217
Effect of storage temperature on the cell wall components of broccoli (Brassica oleracea L. Var. Italica) plant tissues during rehydration Original Research Article
218
Effect of Storage Temperature on the Stability of Phytonutrients in Palm Concentrates
219
EFFECT OF STORAGE TEMPERATURES ON CHEMICAL, MICROBIOLOGICAL AND SENSORY PROPERTIES OF RENNET EXTRACTED BY SOAKING AND MECHANICAL PROCESSES
220
Effect of storage temperatures, O2 concentrations and variety on respiration of mangoes
221
Effect of Storage Time and Concentration of Aflatoxin M1 on Toxin Binding Capacity of L. acidophilus in Fermented milk Product
222
Effect of storage time and conditions on the cotyledon cell wall of the adzuki bean (Vigna angularis)
223
Effect of storage time and consolidation on food powder flowability Original Research Article
224
Effect of storage time and container type on the quality of extra-virgin olive oil
225
Effect of Storage Time and Egg Position on Hatchability of Guinea Fowl Eggs
226
Effect of storage time and heat processing on the volatile profile of Senegalese sole (Solea senegalensis Kaup, 1858) muscle
227
Effect of storage time and ionising irradiation on the physical properties, cooking time and sensory attributes of cowpea (Vigna unguiculata L. Walp)
228
Effect of Storage Time and Temperature of Equine Epididymis on the Viability, Motion Parameters, and Freezability of Epididymal Sperm
229
Effect of storage time and temperature of milk protein concentrate (MPC85) on the renneting properties of skim milk fortified with MPC85
230
Effect of Storage Time and Temperature on Dimensional Stability of Impressions Made with Zinc Oxide Impression Paste
231
Effect of Storage Time and Temperature on Rheological and Microstructural Properties of Gluten
232
Effect of Storage Time and Temperature on Serum Analytes
233
Effect of storage time and temperature on the physicochemical and sensory characteristics of commercial apricot jam
234
Effect of Storage Time of a Ceramic Primer on Microshear Bond Strength to Zirconia
235
Effect of Storage Time of Extended-Pour and Conventional Alginate Impressions on Dimensional Accuracy of Casts
236
Effect of Storage Time on Hatchability of Guinea Fowl Eggs
237
Effect of Storage Time on Internal and External Characteristics of Guinea Fowl (Numida meleagris) Eggs
238
Effect of storage time on microtensile strength of polyacid-modified resin composites
239
Effect of storage time on swine manure solid separation efficiency by screening
240
Effect of storage time on the composition and content of wood extractives in Eucalyptus cultivated in Brazil
241
Effect of storage time on the flowability of biomass-coal granular system
242
Effect of Storage Time on the Quality of Smoked Hetroclarias
243
Effect of Storage Time, Thermocycling And Resin Coatingon Durability of Dentin Bonding Systems
244
Effect of Storage Time, Thermocycling And Resin Coatingon Durability of Dentin Bonding Systems
245
Effect of storage under extremely low oxygen on the volatile composition of ‘Royal Gala’ apples
246
EFFECT OF STORAGE, PRE-HEATING AND TURNING DURING HOLDING PERIOD ON THE HATCHABILITY OF BROILER BREEDER EGGS
247
Effect of storage, processing and cooking on glucosinolate content of Brassica vegetables
248
Effect of store design on consumer purchases: an empirical study of on-line bookstores
249
Effect of store design on consumer purchases: an empirical study of on-line bookstores
250
Effect of stored energy and recovery on the overall recrystallization kinetics of a cold rolled low carbon steel
251
EFFECT OF STORED OIL PALM TRUNK SAP TOWARDS METHYL ESTER SYNTHESIS
252
Effect of storing on the microstructure of Ag/Cu/HA powder
253
Effect of storing total mixed rations anaerobically in bales on feed quality
254
Effect of storm events on riverine nitrogen dynamics in a subtropical watershed, southeastern China Original Research Article
255
Effect of story telling technique towards narrative writing achievement in Malay Language
256
Effect of story telling technique towards narrative writing achievement in Malay Language
257
Effect of Storytelling Instruction on Developing Iranian EFL Learners’ Oral Proficiency within ZPD-activated Proximal Context
258
Effect of stove asymmetric radiation field on thermal comfort using a multisegmented bioheat model
259
Effect of stover fraction and storage method on glucose production during enzymatic hydrolysis
260
Effect of straight and wavy carbon nanotube on the reinforcement modulus in nonlinear elastic matrix nanocomposites
261
Effect of strain and diet upon constitutive and chemically induced activities of several xenobiotic-metabolizing enzymes in rats
262
Effect of strain and nonparabolicity on interband transition energies of InAs/GaAs coupled double quantum dots
263
Effect of strain and ordering on the band-gap energy of InGaP
264
Effect of strain and oxygen vacancies on the structure of 180° ferroelectric domain walls in PbTiO3
265
Effect of strain hardening behavior on forming limit stresses of steel tube subjected to nonproportional loading paths
266
Effect of strain hardening capability on plastic deformation behaviors of material during metal forming
267
Effect of strain hardening in elastic–plastic transition behavior in a hemisphere in contact with a rigid flat
268
Effect of strain hardening of shape memory polymer fibers on healing efficiency of thermosetting polymer composites
269
Effect of strain hardening on texture development in cold rolled Al–Mg alloy
270
Effect of strain hardening on the buckling of structural members and design codes recommendations
271
Effect of Strain Induced Martensite on the Deep Drawing Behavior of 304L Steel: Simulation and Experiment
272
Effect of strain on bone nodule formation by rat osteogenic cells in vitro
273
Effect of strain on the chemical bonds in InAs nanocrystals self-organized on GaAs and Se-terminated GaAs surfaces
274
Effect of strain on the oxygen diffusion in yttria and gadolinia co-doped ceria
275
Effect of strain on the structural and optical properties of Cu–N co-doped ZnO thin films
276
Effect of strain on thermoelectric properties of SrTiO3: First-principles calculations
277
Effect of strain path change on limits to ductility of anisotropic metal sheets
278
Effect of strain path change on limits to ductility of anisotropic metal sheets
279
Effect of strain path change on limits to ductility of anisotropic metal sheets
280
Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel
281
Effect of strain path on evolution of deformation bands during ECAP of pure aluminum
282
Effect of strain path on structure and mechanical behavior of ultra-fine grain Cu-Cr alloy produced by equal-channel angular pressing
283
Effect of strain path on structure and mechanical behavior of ultra-fine grain Cu–Cr alloy produced by equal-channel angular pressing Original Research Article
284
Effect of strain path on texture and annealing microstructure development in bulk pure copper processed by simple shear
285
Effect of strain path on texture and annealing microstructure development in bulk pure copper processed by simple shear Original Research Article
286
Effect of strain rate and density on dynamic behaviour of syntactic foam
287
Effect of strain rate and environment on the mechanical properties of the Ni–19Si–3Nb–0.15B–0.1C intermetallic alloy at high temperatures
288
Effect of Strain Rate and Preloading on the Fracture Toughness of ZrO2-Based Ceramics
289
Effect of strain rate and relative density on compressive deformation behavior of aluminum cenosphere syntactic foam
290
Effect of strain rate and relative density on compressive deformation behaviour of closed cell aluminum–fly ash composite foam
291
Effect of strain rate and temperature on strain hardening behavior of a dissimilar joint between Ti–6Al–4V and Ti17 alloys
292
Effect of strain rate and temperature on tensile properties of ethylene–propylene block copolymers
293
Effect of strain rate and temperature on the plastic deformation behaviour of a bulk metallic glass composite
294
Effect of strain rate on acoustic emission during hydrogen assisted cracking in high carbon steel
295
Effect of strain rate on cement mortar under compression, studied by electrical resistivity measurement
296
Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass
297
Effect of strain rate on compressive behavior of Ti45Zr16Ni9Cu10Be20 bulk metallic glass
298
Effect of strain rate on compressive mechanical properties of extruded Mg–8Li–1Al–1Ce alloy
299
Effect of strain rate on compressive properties of novel Zn12Al based composite foams containing hybrid pores
300
Effect of strain rate on deformation behavior of TRIP steels
301
Effect of strain rate on deformation behaviour of a Mg–8.5Li–1Zn alloy sheet at room temperature
302
Effect of strain rate on deformation behaviour of a Mg–8.5Li–1Zn alloy sheet at room temperature
303
Effect of strain rate on deformation mechanism for ultrafine-grained interstitial-free steel
304
Effect of Strain Rate on Discontinuous Flow and Mechanical Characteristics of High-Nitrogenous Steel
305
Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: Experiments and modeling
306
Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels
307
Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels
308
Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels
309
Effect of strain rate on impact response and ω transformation of quenched Zr–Nb alloys
310
Effect of strain rate on low-cycle fatigue behaviour and mechanism of SiCp/Ly12 composite
311
Effect of strain rate on low-cycle fatigue behaviour and mechanism of SiCp/Ly12 composite
312
Effect of strain rate on microstructure of polycrystalline oxygen-free high conductivity copper severely deformed at liquid nitrogen temperature Original Research Article
313
Effect of strain rate on plastic anisotropy of advanced high strength steel sheets
314
Effect of strain rate on properties of superelastic NiTi thin wires
315
Effect of strain rate on sooting limits in counterflow diffusion flames of gaseous hydrocarbon fuels: Sooting temperature index and sooting sensitivity index
316
Effect of strain rate on stress-induced martensitic formation and the compressive properties of Ti–V–(Cr,Fe)–Al alloys
317
Effect of strain rate on tensile and compression behaviour of Al–Si/graphite composite
318
Effect of strain rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene
319
EFFECT OF STRAIN RATE ON TENSILE FRACTURE BEHAVIOUR OF VISCOELASTIC MATRIX (POLYESTER) AND FIBER REINFORCED COMPOSITES
320
Effect of strain rate on tensile performance of Al/Cu/Al laminated composites produced by asymmetrical roll bonding
321
Effect of strain rate on tensile properties of electric brush-plated nanocrystalline copper
322
Effect of strain rate on the buckling behavior of single- and double-walled carbon nanotubes Original Research Article
323
Effect of strain rate on the compression behavior of TiAl and TiAl–2Mn alloys fabricated by combustion synthesis and hot press consolidation
324
Effect of strain rate on the compressive mechanical behavior of a continuous alumina fiber reinforced ZE41A magnesium alloy based composite
325
Effect of strain rate on the compressive mechanical properties of aluminum alloy matrix composite filled with discontinuous carbon fibers
326
Effect of strain rate on the compressive properties of graphite/epoxy composite in a submarine environment
327
Effect of strain rate on the cyclic hardening of Zircaloy-4 in the dynamic strain aging temperature range
328
Effect of strain rate on the cyclic hardening of Zircaloy-4 in the dynamic strain aging temperature range
329
Effect of strain rate on the forming behaviour of sheet metals
330
Effect of strain rate on the mechanical behaviors of SiC fiber
331
Effect of strain rate on the mechanical properties of CLAM steel in liquid PbLi eutectic
332
Effect of strain rate on the microstructural development through continuous dynamic recrystallization in a microalloyed steel
333
Effect of strain rate on the tensile behavior of a single crystal nickel-base superalloy
334
Effect of strain rate on the tensile properties of unirradiated and irradiated V–4Cr–4Ti
335
Effect of strain rate on the tension behavior of Ti–6.6Al–3.3Mo–1.8Zr–0.29Si alloy at low temperatures
336
Effect of strain rate on true stress–true strain relationships of ultrafine-grained ferrite–cementite steels up to plastic deformation limit
337
Effect of strain rate path on cavitation in superplastic aluminium alloy
338
Effect of strain rate sensitivity on FLDs—An instability approach
339
Effect of strain rate sensitivity on FLDs—An instability approach
340
Effect of strain rates on the fracture morphologies of Zr-based bulk metallic glasses
341
Effect of strain ratio and strain rate on low cycle fatigue behavior of AZ31 wrought magnesium alloy
342
Effect of strain ratio on cyclic deformation and fatigue of extruded AZ61A magnesium alloy
343
Effect of strain ratio on cyclic deformation behavior of a rare-earth containing extruded magnesium alloy
344
Effect of strain relaxation of oxidation-treated SiGe epitaxial thin films and its nanomechanical characteristics
345
Effect of strain waveform on creep-fatigue life for Sn–8Zn–3Bi solder
346
Effect of strain-dependent cohesive zone model on predictions of crack growth resistance
347
Effect of strainer type, spray pressure, and orifice size on the discharge coefficient of standard flat-fan nozzles
348
Effect of strain-hardening rate on the grain-to-grain variability of local plastic strain in spin-formed fcc metals
349
Effect of strain-induced martensite on hydrogen embrittlement of austenitic stainless steels investigated by combined tension and hydrogen release methods
350
Effect of strain-induced martensite on the formation of nanocrystalline 316L stainless steel after cold rolling and annealing
351
Effect of strain-induced precipitation on dynamic recrystallization in Mg–Al–Sn alloys
352
Effect of strain-induced precipitation on the low angle grain boundary in AA7050 aluminum alloy
353
Effect of strain-modified particles on the formation of fined grains and the properties of AA7050 alloy
354
Effect of strange male odour on parental care in lactating female mice
355
EFFECT OF STRATEGIC ATTITUDES ON MARKETING CAPABILITIES IN SMALL AND MEDIUM ENTERPRISES (SMES)
356
EFFECT OF STRATEGIC DETERMINANTS OF TRAINING ON THE JOB PERFORMANCE, EFFECTIVENESS AND EFFICIENCY: AN EMPIRICAL STUDY
357
Effect of strategic helminthosis control on mortality of communally grazed Menz lambs of smallholders in the cool central Ethiopian highlands
358
Effect of strategic supplementation with multi-nutrient urea molasses blocks on body weight and body condition score of Lohi sheep owned by tenants of Pakistan
359
Effect of straw addition on nitrous oxide and methane emissions from stored farmyard manures
360
Effect of straw and plastic film management under contrasting tillage practices on the physical properties of an erodible loess soil
361
Effect of straw on lamb welfare, production performance and meat quality during the finishing phase of fattening
362
Effect of straw proportion and Ca- and Al-containing additives on ash composition and sintering of wood–straw pellets
363
Effect of straws from Bt-transgenic rice on selected biological activities in water-flooded soil
364
Effect of Stream Mixing on RO Energy Cost Minimization Original Research Article
365
Effect of streambed bacteria release on E. coli concentrations: Monitoring and modeling with the modified SWAT
366
Effect of streambed bacteria release on E. coli concentrations: Monitoring and modeling with the modified SWAT
367
Effect of streamflow forecast uncertainty on real-time reservoir operation
368
Effect of streamflow stochasticity on bedform-driven hyporheic exchange
369
Effect of streamline curvature on flow field of a turbulent plane jet in cross-flow
370
Effect of strength and age on the stress–strain curves of concrete specimens
371
Effect of strength deterioration on inelastic seismic torsional behaviour of asymmetric RC buildings
372
Effect of strength mis-match and dynamic loading on ductile fracture initiation
373
Effect of strength on environment-assisted cracking of Ti–8V–6Cr–4Mo–4Zr–3Al in aqueous NaCl: Part 1: Age hardening vs. work hardening
374
Effect of strength on environment-assisted cracking of Ti–8V–6Cr–4Mo–4Zr–3Al in aqueous NaCl: Part 1: Age hardening vs. work hardening
375
Effect of strength on environment-assisted cracking of Ti–8V–6Cr–4Mo–4Zr–3Al in aqueous NaCl: Part II: Crack tip strain rate
376
Effect of strength on environment-assisted cracking of Ti–8V–6Cr–4Mo–4Zr–3Al in aqueous NaCl: Part II: Crack tip strain rate
377
Effect of Strength Parameters on Seismic Performance of Elevated Tanks by Probabilistic Analysis
378
Effect of Strength Training and Short‑term Detraining on Muscle Mass in Women Aged Over 50 Years Old
379
Effect of Strength Training on Plasma Levels of Homocysteine in Patients with Type 2 Diabetes
380
Effect of Strengthening Exercises on Serum C-Reactive Protein after Coronary Artery Bypass Grafts
381
Effect of Strengthening Family Coping Resources on Emotion Regulation of Family Caregivers of Patients with Schizophrenia
382
Effect of strength-modulus correlation on reliability of randomly heterogeneous beams
383
Effect of Strengths and Exposure Durations of Magnetic Field on Seeds Germination of Catharanthus roseus cv. ‘Acillata’
384
Effect of strenuous exercise and ex vivo TLR3 and TLR4 stimulation on inflammatory gene expression in equine pulmonary leukocytes
385
Effect of strenuous exercise and ex vivo TLR3 and TLR4 stimulation on inflammatory gene expression in equine pulmonary leukocytes
386
Effect of strenuous physical activity and Crocus Sativus supplementation on inflammatory biomarkers in male mountain climbers
387
Effect of streptavidin affinity mutants on the integrin-independent adhesion of biotinylated endothelial cells
388
Effect of Streptavidin RGD Mutant on the Adhesion of Endothelial Cells
389
Effect of streptavidin–biotin on endothelial vasoregulation and leukocyte adhesion
390
Effect of Streptococcus mutans on the flexural strength of resin‑based restorative materials
391
Effect of Streptokinase on Human Neutrophil Function in Vitro and in Patients with Acute Myocardial Infarction
392
Effect of Streptokinase on Short-term Outcomes in the Acute Myocardial Infarction with ST-Segment Elevation
393
Effect of streptolysin O on the microelasticity of human platelets analyzed by atomic force microscopy
394
Effect of streptolysin O on the microelasticity of human platelets analyzed by atomic force microscopy
395
Effect of Streptomyces melanosporofaciens strain EF-76 and of chitosan on common scab of potato
396
Effect of streptozotocin-induced diabetes mellitus on alveolar bone deposition in the rat
397
Effect of streptozotocin-induced diabetes mellitus on the cerebellar cortex of adult male albino rats: histological and immunohistochemical study
398
Effect of stress and strain state on heterogeneous coarsening in Sn-Pb solder
399
Effect of stress and strain state on heterogeneous coarsening in Sn–Pb solder Original Research Article
400
Effect of stress and temperature on the micromechanics of creep in highly irradiated bone and dentin
401
Effect of stress axis orientation on the creep deformation behavior of Ti–48Al polysynthetically twinned (PST) crystals
402
Effect of stress axis orientation on the creep deformation behavior of Ti–48Al polysynthetically twinned (PST) crystals
403
Effect of Stress Conditions on the Quality and Stability of Olive and Palm Oil Blends
404
Effect of stress distribution on the tool joint failure of internal and external upset drill pipes
405
Effect of stress during handling, seawater acclimation, confinement, and induced spawning on plasma ion levels and somatolactin immunoreactivity in mature female thin-lipped gray mullet, Liza ramada
406
Effect of stress gradient on the deformation behavior of a bulk metallic glass under uniaxial tension
407
Effect of stress gradients in the surface layer of beryllium on X-ray stress measurement
408
Effect of stress history on CPT and DMT results in sand
409
Effect of stress history on cumulative fatigue damage of fine-grained isotropic GCR graphite Original Research Article
410
Effect of stress induced by suboptimal growth factors on survival of Escherichia coli O157:H7
411
Effect of stress inoculation training on coping styles and psychological well-being status of mothers with mental retard children
412
Effect of stress inoculation training on the levels of stress, anxiety, and depression in cancer patients
413
Effect of Stress Management on Quality of Life in Females with Rheumatoid Arthritis
414
Effect of Stress Management Training Based on PRECEDE Model on Prehospital Emergency Staff Occupational Tension in Mazandaran University of Medical Sciences in 2016
415
Effect of Stress Management Training on the Mental Health of Medical Students and Interns Training Centers During the Pandemic: An Intervention Study
416
Effect of stress on acid dissolution of enamel
417
Effect of Stress on Coronary Risk Factors
418
Effect of stress on feeding behavior and body weight in rats
419
Effect of stress on feeding behavior in rats: individual differences
420
Effect of stress on interleukin-2 receptor expression by bovine mononuclear leukocytes
421
Effect of stress on interleukin-2 receptor expression by bovine mononuclear leukocytes
422
Effect of stress on microstructural evolution and mechanical properties of 12Cr3W3Co steel during aging and short-term creep
423
Effect of stress on microwave dielectric properties of layered Mg0.93Ca0.07TiO3–(Ca0.3Li0.14Sm0.42)TiO3 ceramics
424
Effect of stress on pain perception in young women
425
Effect of stress on the annealing behavior of severely plastically deformed aluminum alloy 3103
426
Effect of stress on the electric polarization in cement
427
Effect of stress on the structural relaxation behavior of glasses
428
Effect of stress on μ phase formation in single crystal superalloys
429
Effect of stress orientation on microstructural evolution during creep of near-lamellar Ti–47Al–2Cr–2Nb
430
Effect of stress path on pre-peak damage in rock induced by macro-compressive and -tensile stress fields
431
Effect of stress peening on surface layer characteristics of (TiB + TiC)/Ti–6Al–4V composite
432
Effect of stress ratio on fatigue behaviour in SiC particulate-reinforced aluminium alloy composite
433
Effect of stress ratio on fatigue crack growth in TiAl intermetallics at room and elevated temperatures
434
Effect of stress ratio on fatigue crack growth in TiAl intermetallics at room and elevated temperatures
435
Effect of stress ratio on fatigue crack propagation in a functionally graded metal matrix composite
436
Effect of stress ratio on long life fatigue behavior of high carbon chromium bearing steel under axial loading
437
Effect of stress relief at 350 °C and 550 °C on the impact properties of duplex stainless steels
438
Effect of stress relief groove on fretting fatigue strength and index for the selection of optimal groove shape
439
Effect of stress relief temperature and cooling rate on pressure vessel steel welds
440
Effect of stress relief temperature and cooling rate on pressure vessel steel welds
441
Effect of Stress Relieving on Mechanical and Metallurgical Properties of Shielded Metal Arc Welded Joints of A517 Steel
442
Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation Original Research Article
443
Effect of Stress Triaxiality on Yielding of Anisotropic Materials under Plane Stress Condition
444
Effect of stress, anxiety and depression on unstimulated salivary flow rate and xerostomia
445
Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model
446
Effect of stress-induced martensitic transformation on the crack tip stress-intensity factor in Ni–Mn–Ga shape memory alloy Original Research Article
447
Effect of stress-induced α″ martensite on Youngʹs modulus of β Ti–33.6Nb–4Sn alloy
448
Effect of stress-like concentrations of cortisol on the feedback potency of oestradiol in orchidectomized sheep
449
Effect of stress-state and spacing on voids in a shear-field
450
Effect of stress-temperature regimes on creep mechanisms in Ti-24Al-11Nb
451
Effect of stress-temperature regimes on creep mechanisms in Ti-24Al-11Nb
452
Effect of Stretching Combined with a Slow Deep Breathing Exercise on Patients’ Anxiety after Coronary Artery Bypass Grafting: A Randomized Clinical Trial
453
Effect of Strict Glycemic Control in Patients With Diabetes Mellitus on Frequency of Macrovascular Events
454
Effect of strip entry temperature on the formation of interfacial layer during hot-dip galvanizing of press-hardened steel
455
Effect of stromal-cell-derived factor 1 on stem-cell homing and tissue regeneration in ischaemic cardiomyopathy
456
Effect of strong base addition to hole-collecting buffer layer in polymer solar cells
457
Effect of strong coupling on interfacial electron transfer dynamics in dye-sensitized TiO2 semiconductor nanoparticles
458
Effect of Strong Electrolytes on Edible Oils Part 1: Viscosity of Sunflower Oil In 1,4-Dioxane at Different Temperatures
459
Effect of strong electrolytes on edible oils part II: vViscosity of maize oil in 1,4-dioxane in the presence of HCl, NaOH and NaCl at different temperatures
460
Effect of Strong Electrolytes on Edible Oils Part III: Viscosity of canola oil in 1,4- dioxane in the presence of HCl, NaOH and NaCl at different Temperatures
461
Effect of strong excitation of the CO2 asymmetric mode on transport properties Original Research Article
462
Effect of strong magnetic fields on the photocurrent of a poly(N-methylpyrrole) modified electrode
463
Effect of strong metal–support interaction on the catalytic performance of Pd/TiO2 in the liquid-phase semihydrogenation of phenylacetylene
464
Effect of strong surface anisotropy on morphology of periodic surface profiles Original Research Article
465
Effect of strong‑column weak‑beam design provision on the seismic fragility of RC frame buildings
466
Effect of strongly oxidizing environment on whisker growth form tin coating
467
Effect of strontia on the densification and mechanical properties of sol–gel alumina
468
Effect of strontium addition on europium-doped ceria properties
469
Effect of strontium and cerium doping on the structural and catalytic properties of PrMnO3 oxides
470
Effect of strontium and gelatin on the reactivity of α-tricalcium phosphate
471
Effect of strontium and phosphorus source on the structure, morphology and luminescence of Sr5(PO4)2SiO4:Eu2+phosphor prepared by solid-state reaction
472
Effect of strontium concentration on electrical conduction properties of Sr-modified BaSnO3
473
Effect of strontium concentration on sulfur poisoning of LSCF cathodes
474
Effect of strontium content on microstructure in (LaxSr1−x)FeO3 ceramics
475
EFFECT OF STRONTIUM CONTENT ON THE MECHANICAL PROPERTIES OF HYPO AND HYPER AL-SI CAST ALLOYS
476
Effect of strontium doping on dielectric, ferroelectric and piezoelectric properties of PLZTN ceramics
477
Effect of strontium in combination with fluoride on enamel remineralisation in vitro
478
Effect of strontium ions on the early formation of biomimetic apatite on single crystalline rutile
479
Effect of strontium ions on the growth of ROS17/2.8 cells on porous calcium polyphosphate scaffolds
480
Effect of strontium on flow behavior and texture evolution during the hot deformation of Mg–1 wt%Mn alloy
481
Effect of strontium on liquid structure of Al–Si hypoeutectic alloys using high-energy X-ray diffraction Original Research Article
482
Effect of strontium on the texture and mechanical properties of extruded Mg–1%Mn alloys
483
Effect of Strontium Ranelate on Condylar Growth during Mandibular Advancement in Rats
484
Effect of Strontium Ranelate on Multiple Organ Damage in a Rat Sepsis Model
485
Effect of strontium substitution on the structure, ionic diffusion and dynamic properties of 45S5 Bioactive glasses
486
Effect of strontium-substituted biphasic calcium phosphate on inflammatory mediators production by human monocytes
487
Effect of strontium-to-calcium ratio on the structure, crystallization behavior and functional properties of diopside-based glasses
488
Effect of structural alteration of ionic liquid on their bulk and molecular level interactions with ethylene glycol
489
Effect of structural and acidity/basicity changes of CuO–CeO2 catalysts on their activity for water–gas shift reaction
490
Effect of structural anisotropy on electrical and magnetic properties of polyaniline conducting films
491
Effect of structural change of collagen fibrils on the durability of dentin bonding
492
Effect of structural changes in sesquifulvalene on the intramolecular charge transfer and nonlinear polarizations – a theoretical study
493
Effect of structural changes of silica filler on the coefficient of thermal expansion (CTE) of underfill encapsulant
494
Effect of Structural Changes on Corrosion Inhibition Behavior of Synthesized N2O4 Imine Compounds for Steel Pipelines in Oil and Gas Wells
495
Effect of structural characteristics on impact breakage of agglomerates
496
Effect of structural defect on phonon transmission quantization in low-dimensional superlattices
497
Effect of structural defects on anomalous ultrasound propagation in solids during second-order phase transitions
498
Effect of structural defects on corrosion initiation of TiN nanocrystalline films
499
Effect of structural defects on InSb/AlxIn1−x Sb quantum wells grown on GaAs (0 0 1) substrates
500
Effect of structural defects on the strength and damping properties of a solid material
501
Effect of structural dispersity on the high-temperature strength of chromium-nickel alloys
502
Effect of structural evolution and surface morphological changes on the electrochemical response of an FeNbAlMnCuSiB alloy
503
Effect of structural evolution of aluminum powder during ball milling on hydrogen generation in aluminum–water reaction
504
Effect of structural factors on maximum aerodynamic heat flux of strut leading surface
505
Effect of structural features on enzyme digestibility of corn stover
506
Effect of structural forbiddenness in fusion of heavy nuclei
507
Effect of structural geometry and crack location on crack driving forces for cracks in welds
508
Effect of Structural Height on the Location of Key Element in Progressive Collapse of RC Structures
509
Effect of structural modification on the inhibitory selectivity of rutaecarpine derivatives on human CYP1A1, CYP1A2, and CYP1B1
510
Effect of structural modifications in the laser properties of polymer films doped with perylenebisimide derivatives
511
Effect of structural modifications of diaza-18-crown-6 on the extractability and selectivity of univalent metal picrates
512
Effect of structural modifications on photosensitizing activities of hypocrellin dyes: EPR and spectrophotometric studies
513
Effect of structural modifications on the spectroscopic properties and dynamics of the excited states of peridinin
514
Effect of structural non-uniformity on the temperature dependence of the crystal-melt interfacial tension
515
Effect of structural non-uniformity on the temperature dependence of the crystal-melt interfacial tension
516
Effect of structural packing on the luminescence properties in tungsten bronze compounds M2KNb5O15 (M=Ca, Sr, Ba)
517
Effect of structural relaxation of glassy PET on crystallization process observed by the simultaneous DSC–XRD and DSC–FTIR
518
Effect of structural relaxation on plastic flow in a Ni–Nb metallic glassy film Original Research Article
519
Effect of structural transformations preceding crystallization on functional properties of Fe73.5Cu1Nb3Si15.5B7 amorphous alloy
520
Effect of structural transition of the host assembly on dynamics of a membrane-bound tryptophan analogue Original Research Article
521
Effect of structural uncertainties on seismic performance of moment frame rehabilitated with steel shear wall
522
Effect of structural variations in amorphous silicon based single and multi-junction solar cells from numerical analysis
523
Effect of structural, electrical and optical properties of electrodeposited bismuth selenide thin films in polyaniline aqueous medium
524
EFFECT OF STRUCTURAL, REDOX AND ACID CHARACTERISTICS OF MxOy/ZrO2(Al2O3) (M – Mn, Co, Cr) OXIDE NANOCOMPOSITES ON THEIR CATALYTIC PROPERTIES IN THE DEEP OXIDATION OF METHANE
525
Effect of structural, redox and acid characteristics of MxOy/ZrO2(Al2O3) (M-Mn, Co, Cr) oxide nanocomposites on their catalytic properties in the deep oxidation of methane
526
Effect of structure and bonding on the interfacial properties and the reactivity of layered double hydroxides and Zn hydroxide salts
527
Effect of structure and charge of polysaccharide flocculants on their flocculation performance for bentonite suspensions
528
Effect of structure and concentration of polymer, metal ion and pH of the medium on the fluorescence characteristics of hyperbranched polyamines
529
Effect of structure and morphology on photocatalytic properties of TiO2 layers
530
Effect of structure and texture on the anisotropy of strength properties arising in the rolling of steel tubes
531
Effect of structure and thermal properties of a Fischer–Tropsch catalyst in a fixed bed
532
Effect of structure anisotropy on low temperature spin dynamics in quantum wells
533
Effect of structure change on thermal and dielectric characteristics in low-temperature firing Bi2O3–B2O3–ZnO glasses
534
Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel
535
Effect of structure lifespan on scour countermeasure design using a probabilistic method
536
Effect of structure modification of chondroitin sulfate C on its enantioselectivity to basic drugs in capillary electrophoresis
537
Effect of structure of CuO/ZnO/Al2O3 composites on catalytic performance for hydrogenation of fatty acid ester Original Research Article
538
Effect of structure of HEMA–DEGMA hydrogel matrix on diffusion coefficients of PEG tracers. Variation of hydrogel crosslink density by change of polymer concentration
539
Effect of structure of pyrocarbon on the static and dynamic mechanical properties of carbon/carbon composites
540
Effect of structure on electronic properties of the iron-carbon nanotube interface
541
Effect of structure on enthalpy relaxation of polycarbonate: Experiments and modeling
542
Effect of structure on second harmonic generation in molecularly doped poly(ethylene oxide)/atactic-poly(methylmethacrylate) blends
543
Effect of Structure on the Adsorption of Amino Acids on Copper Electrodes
544
Effect of structure on the creep of open-cell nickel foams
545
Effect of Structure on the Geotechnical Properties of Bauxite Residue
546
Effect of structure on the kinetics of the nucleophilic substitution of acylonium ions
547
Effect of structure on the photocatalytic activity of Pt-doped TiO2 nanotubes
548
Effect of structure on the storage characteristics of manganese oxide electrode materials
549
Effect of structure on thermal behaviour of epoxy resins
550
Effect of Structure Parameters on Power and Magnetic Field in Electromagnetic Soft-Contact Continuous Casting System Original Research Article
551
Effect of structure variation on thermal conductivity of hydrogenated silicon film
552
Effect of Structured Nursing Education Programs in Prevention of Admitted Patients’ Phlebitis
553
Effect of structured packing density on performance of air dehumidifier
554
Effect of structured workshop training on subsequent performance of journal peer reviewers
555
Effect of structure-directing agent on AlPO4-n synthesis from aluminum dross
556
Effect of Student Duty Hours Policy on Teaching and Satisfaction of 3rd Year Medical Students
557
Effect of student team achievement division (STAD) on academic achievement of undergraduate psychology students
558
Effect of Student’s Brand Awareness on Brand Image and Brand Trust: Selçuk University, Economic and Administrative Science Faculty Example
559
Effect of Studentsʹ After-School Activities on Teachersʹ Academic Expectancies
560
Effect of study design and quality on unsatisfactory rates, cytology classifications, and accuracy in liquid-based versus conventional cervical cytology: a systematic review
561
Effect of stun duration and current level applied during head to back and head only electrical stunning of pigs on pork quality compared with pigs stunned with CO2
562
Effect of stunning conditions on occurence of PSE defects in hams of rn+/RN− pigs
563
Effect of stunning methods on the differentiation of frozen-thawed bullfrog meat based on the assay of β-hydroxyacyl-CoA-dehydrogenase
564
Effect of stunning systems on meat quality of Manchego suckling lamb packed under modified atmospheres
565
Effect of stunting of juvenile bighead carp Aristichthys nobilis (Richardson) on compensatory growth and reproduction
566
Effect of Stunting Prevention Education Program Through Instagram on Literacy and Attitude of Pre-Marital Couples
567
Effect of styrene oligomers on syndiospecific polymerization of styrene
568
Effect of styrene–butadiene copolymer latex on properties and durability of road base stabilized with Portland cement additive
569
Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar
570
EFFECT OF STYRYL SUBSTITUENTS INTRODUCED INTO THE PERIPHERY OF PYRAZINOPORPHYRAZINE MACROCYCLE ON THE SPECTRAL AND LUMINESCENCE PROPERTIES OF COMPLEXES
571
Effect of sub acute exposure of nano Zinc particles on oxidative stress parameters in rats
572
Effect of sub- and supercritical CO2 treatment on the properties of Pseudomonas cepacia lipase
573
Effect of sub- and supercritical water pretreatment on enzymatic degradation of chitin
574
Effect of Sub hypnotic Doses of Propofol and Midazolam for Nausea and Vomiting During Spinal Anesthesia for Cesarean Section
575
EFFECT OF SUB INHIBITORY CONCENTRATIONS OF ANTIBIOTICS ON ADHERANCE OF PSEUDOMONAS AERUGINOSA
576
Effect of sub lethal concentration of imidacloprid on proximate body composition of Labeo rohita
577
Effect of subacromial decompression on laxity of the acromioclavicular joint: biomechanical testing in a cadaveric model
578
Effect of subacute dietary nitrate on production traits and plasma analytes in Suffolk ewes
579
Effect of Subchronic Administration of Aqueous Artemisia annua Extract on a1-Adrenoceptor Agonist-Induced Contraction of Isolated Aorta in Rat
580
Effect of Subchronic Administration of Captopril on a1-Adrenoceptor Agonist-Induced Contraction of Isolated Aorta in Rat
581
Effect of sub-chronic intermittent ethanol exposure on spatial learning and ethanol sensitivity in adolescent and adult rats
582
Effect of subchronic treatment with mercury chloride on NTPDase, 5′-nucleotidase and acetylcholinesterase from cerebral cortex of rats
583
Effect of subclinical infection on maintaining immunity against measles in vaccinated children in West Africa
584
Effect of subclinical intramammary infection on somatic cell counts, NAGase activity and gross composition of goats milk
585
Effect of Subconjunctival Injection of Mesenchymal Stem Cells on Alkali-Induced Acute Corneal Injury in Rats
586
Effect of subcooling and amount of hydrate former on formation of cyclopentane hydrates in brine Original Research Article
587
Effect of sub-cooling channel in an ITER 13 T-40 kA Nb3Sn coil (CS insert) on stability Original Research Article
588
EFFECT OF SUBCOOLING ON CONVECTIVE MELTING OF A PARTICLE
589
Effect of subcutaneous apomorphine on tremor in idiopathic Parkinsonʹs disease
590
Effect of subcutaneous carbon dioxide insufflation on arterial pCO2
591
Effect of subcutaneous Enoxaparin injection duration on bruising size in acute coronary syndrome patients
592
Effect of subcutaneous fat thickness and surface electrode configuration during neuromuscular electrical stimulation
593
Effect of subeffective dose of GABA agonists on attenuation of morphine tolerance in rats: Behavioral and electrophysiological studies
594
Effect of sub-freezing temperatures on a PEM fuel cell performance, startup and fuel cell components
595
Effect of subgrid models on the computed interscale energy transfer in isotropic turbulence
596
Effect of subgrid-scale mixing on the evolution of forced submesoscale instabilities
597
Effect of sub-inhibitory antibacterial stress on bacterial surface properties and biofilm formation
598
Effect of Subinhibitory concentrations of imipenem and piperacillin on transcriptional expression of algD and lasB genes in Pseudomonas aeruginosa
599
Effect of subintimal resection on initial outcome and restenosis for native coronary lesions and saphenous vein graft disease treated by directional coronary atherectomy report from the Caveat I and II investigators
600
Effect of subjective knee-joint pain on the laterality of knee extension strength and gait in elderly women
601
Effect of Subjective Norms Mediation to Entrepreneurship Intention at Entrepreneurship Learning in School
602
Effect of sub-layer corrections on the roughness parameterization of a Douglas fir forest
603
Effect of sub-lethal challenge with Photodynamic Antimicrobial Chemotherapy (PACT) on the antibiotic susceptibility of clinical bacterial isolates
604
Effect of sub-lethal concentrations of biocides on the susceptibility to antibiotics of multi-drug resistant Salmonella enterica strains
605
Effect of sublethal concentrations of chlorpyrifos on three successive generations of Daphnia carinata
606
Effect of sub-lethal concentrations of HEMA (2-hydroxyethyl methacrylate) on THP-1 human monocyte-macrophages, in vitro
607
Effect of Sub-Lethal Concentrations of Manganese on Sperm Motility of the Caspian lamprey (Cspimyzon wagneri)
608
Effect of Sublethal Concentrations of Pesticides on the Feeding Behavior of Daphnia magna
609
Effect of sub-lethal Diazinon Concentrations on Blood Plasma Biochemistry
610
Effect of Sublethal Doses of Cadmium on the Phototactic Behavior of Daphnia magna
611
Effect of sublethal doses of thiamethoxam and pirimicarb on functional response of Diaeretiella rapae (Hymenoptera: Braconidae), parasitoid of Lipaphis erysimi (Hemiptera: Aphididae)
612
effect of sub-lethal environmental stresses on the cell survival and antibacterial susceptibility of lt;i gt;listeria monocytogenes lt;/i gt; ptcc1297
613
Effect of Sub-Lethal Environmental Stresses on the Cell Survival and Antibacterial Susceptibility of Listeria monocytogenes PTCC1297
614
Effect of sub-lethal heating and growth temperature on expression of the ribosomal RNA rrnB P2 promoter during the lag phase of Pseudomonas fluorescens
615
Effect of sub-lethal nitrite on selected haematological parameters in fingerling Catla catla (Hamilton)
616
Effect of Subliminal Auditory Stimulation on Components of Auditory Late Responses and Functional Magnetic Resonance Imaging Data in Adults with Normal Hearing
617
Effect of sublingual nitroglycerine on the compliance of large and small arteries
618
Effect of subluteal concentrations of progesterone on luteinizing hormone and ovulation in lactating dairy cows
619
Effect of submerged aquatic vegetation on turbulence induced by an oscillating grid
620
Effect of Submerged Arc Welding Flux Component on Softening Temperature Original Research Article
621
Effect of Submerged Arc Welding Parameter on Crack Growth Energy on St37
622
Effect of submerged flexible vegetation on flow structure and resistance
623
Effect of Submerged Multi-pass Friction Stir Process on the Mechanical and Microstructural Properties of Al7075 Alloy
624
Effect of submergence ratio on the liquid phase velocity, efficiency and void fraction in an air-lift pump
625
Effect of submergence–emergence sequence and organic matter or aluminosilicate amendment on metal uptake by woody wetland plant species from contaminated sediments
626
Effect of sub-MIC values of metronidazole, ciprofloxacin, and imipenem on growth and toxin production in Clostridioides difficile
627
Effect of sub-micrometer polymer gratings generated by two-beam interference on surface plasmon resonance
628
Effect of sub-micron Al2O3 concentration on dry wear properties of 6061 aluminum based composite
629
Effect of sub-micron silica fillers on the mechanical performances of epoxy-based composites
630
Effect of submicron size SiC particles on microstructure and mechanical properties of AZ31B magnesium matrix composites
631
EFFECT OF SUBMINIMAL INHIBITORY CONCENTRATION OF GENTAMICIN ON THE PATHOGENICITY OF ESCHERICHIA COLI CAUSING INFANTILE DIARRHOEA
632
Effect of submonolayer carbon on nanoscale Ge dot growth on Si(0 0 1) substrates
633
Effect of suboptimal nutrition during lactation on milk protein gene expression in the rat
634
Effect of sub-pixel misregistration on the determination of the point spread function of a CT imaging system
635
Effect of subprimal type, quality grade, and aging on display color stability of ground beef patties
636
Effect of subprimal type, quality grade, and aging on sensory properties of ground beef patties
637
Effect of subsampling tropical cyclone rainfall on flood hydrograph response in a subtropical mountainous catchment
638
EFFECT OF SUBSCAPULARIS TEARS ON FUNCTIONAL SCORES OF PATIENTS UNDERGOING ROTATOR CUFF REPAIR
639
Effect of subsequent tension and annealing on microstructure evolution and strength enhancement of friction stir welded Mg alloys
640
Effect of subsoil compaction constraints on some morphological, physiological and agronomic properties of wheat (Triticum aestivum L.) under rain-fed farming
641
EFFECT OF SUBSTANCE-P ON GALACTOPOIETICS HORMONES SECRETIONS AND MILK PRODUCTION AND COMPOSITIONS
642
Effect of substituent dtp to optical properties of heterobimetallic M/Ag/S nest-shaped clusters (M = Mo, W)
643
Effect of substituent groups for formation of organic-metal hybrid nanowires by charge-transfer of tetrathiafulvalene derivatives with metal ion
644
Effect of substituent of β-diketones on the synergistic extraction of lanthanoids with linear polyether
645
Effect of substituent on dimensionality and properties in divalent metal isophthalate coordination polymers with a conformationally flexible dipyridylamide coligand
646
Effect of substituent on the enantioselectivity for lipase-catalyzed kinetic resolution of glycerol derivatives
647
Effect of substituent position on optical properties of boron-dipyrromethane isomers
648
Effect of substituent position on the ethylene polymerization by Fe(II) and Co(II) pyridyl bis-imine catalysts
649
Effect of substituent size and dimensionality on potency of phenolic xenoestrogens
650
Effect of substituent structure on pyrimidine electrophilic substitution
651
Effect of substituent structure on pyrimidine electrophilic substitution: a rebuttal
652
Effect of substituents and alkoxy-chain length on the phase behavior of 4-substituted phenyl-4-alkoxybenzoates
653
Effect of substituents and structural modification on conformational equilibrium in bis-quinolizidine system
654
Effect of substituents in directing the regioselective synthesis of novel pyridinium chlorins
655
Effect of substituents in the manganese μ-oxo porphyrins catalyzed oxidation of cyclooctane with molecular oxygen
656
Effect of substituents on addition polymerization of norbornene derivatives with two Me3Si-groups using Ni(II)/MAO catalyst
657
Effect of substituents on charge carrier dynamics in thiophene oligomers
658
Effect of substituents on crystal packing of functionalized 4,4′-bis(benzylideneamino)diphenyl ether(s) and their reduced benzyl forms: Synthesis, characterization, optical and thermal properties
659
Effect of substituents on electrochemical and optical properties of thienyl-derivatized polypyrenes
660
Effect of substituents on the 13C chemical shifts of the azomethine carbon atom of N-(substituted phenylmethylene)-3- and -4-aminobenzoic acids
661
Effect of substituents on the molybdenum mediated carbonylation and methoxycarbonylation of dihaloalkynes
662
Effect of substituents on the orientation of octasubstituted copper(II) phthalocyanine thin films
663
Effect of substituents on the permeation properties of polyamide membranes
664
Effect of substituents on the photoluminescence performance of Ir(III) complexes: Synthesis, electrochemistry and photophysical properties
665
Effect of substituents on the photoluminescent and electroluminescent properties of substituted cyclometalated iridium(III) complexes
666
Effect of substituents on the properties of distyrylarylene-based field-effect transistor materials
667
Effect of substituents on the spectroscopic properties of all-trans-1,6-diphenyl-1,3,5-hexatriene Original Research Article
668
Effect of substituents on the thermochromism of stilbazolium merocyanines incorporated in epoxy resin
669
Effect of substitutational elements on plastic deformation behaviour of NbSi2-based silicide single crystals with C40 structure Original Research Article
670
Effect of substitute milk on growth and breeding rates of hysterectomy derived guinea pigs neonates
671
Effect of substituted dextran derivative on complement activation in vivo
672
Effect of substituted groups of ligand on construction of topological networks: In situ generated silver(I) tetrazolate coordination polymers
673
Effect of substituted groups on characterization and water vapor sorption property of polyhedral oligomeric silsesquioxane (POSS)-containing methacryl polymer membranes
674
Effect of substituted groups on the living anionic polymerization of 2-vinylcarbazole derivatives
675
Effect of substituting Al for Co on the hydrogen-storage performance of La0.7Mg0.3Ni2.6AlxCo0.5−x (x = 0.0–0.3) alloys
676
Effect of substituting B for Ni on electrochemical kinetic properties of AB5-type hydrogen storage alloys for high-power nickel/metal hydride batteries
677
Effect of substituting barley with sorghum on starch digestion, rumen microbial yield and growth in Iranian Baluchi lambs fed high concentrate diets
678
Effect of substituting cerium-rich mischmetal with lanthanum on high temperature properties of die-cast Mg–Zn–Al–Ca–RE alloys
679
Effect of substituting cerium-rich mischmetal with lanthanum on high temperature properties of die-cast Mg–Zn–Al–Ca–RE alloys
680
Effect of substituting cerium-rich mischmetal with lanthanum on high temperature properties of die-cast Mg–Zn–Al–Ca–RE alloys
681
Effect of substituting cerium-rich mischmetal with lanthanum on microstructure and mechanical properties of die-cast Mg–Al–RE alloys
682
Effect of substituting Co with Fe on the cycle stabilities of the as-cast and quenched AB5-type hydrogen storage alloys
683
Effect of Substituting Dietary Oxytetracycline with Aqueous Prangos Ferulacea Extract on Growth Performance, Prececal Nutrient Digestibility, Cecal Microbiota and Carcass Traits in Hubbard Broiler Chickens
684
Effect of substituting elements on hydrogen uptake for Pd–Rh–H and Pd–Ag–H systems evaluated by magnetic susceptibility measurement
685
Effect of substituting increasing levels of organic Zn for inorganic Zn on performance, hematological and serum biochemical constituents, antioxidant status and immune response in rat
686
Effect of substituting Mm with La on the electrochemical performances of Co-free LaxMm1−x(NiMnSiAlFe)4.9 (x = 0–1) electrode alloys prepared by casting and rapid quenching
687
Effect of substituting Mn for Ni on the hydrogen storage and electrochemical properties of ReNi2.6−xMnxCo0.9 alloys
688
Effect of substituting Ni with Cu on the cycle stability of La0.7Mg0.3Ni2.55−xCo0.45Cux (x = 0–0.4) electrode alloy prepared by casting and rapid quenching
689
Effect of substituting pork backfat with rind on quality characteristics of pork sausage
690
Effect of substituting soybean lecithin for egg yolk in an extender used for the cryopreservation of stallion semen
691
Effect of substituting soybean lecithin for egg yolk in an extender used for the cryopreservation of stallion semen
692
Effect of Substituting Soybean Meal with Cowpea (Vigna unguiculata WAL) Supplemented with Natural Plant Charcoals in Broiler Diet on Growth Performances and Carcass Characteristics
693
Effect of substituting soybean meal with mycelium of Penicillium chrysogenum in lamb diets on performance and carcass quality
694
Effect of substituting sp-element on half metallic ferromagnetism in NiCrSi Heusler alloy
695
Effect of Substituting Yellow Maize for Sorghum on Broiler Performance
696
Effect of substitution and temperature on the reactivity of bicyclo[3.1.0]hex-1-ene system
697
Effect of substitution by cerium on the activity of LaMnO3 perovskite in methane combustion Original Research Article
698
Effect of substitution elements on magnetization of monodispersed MFe2O4 particles
699
Effect of substitution group variation on the optical functions of -5-sulfono-7-(4-x phenyl azo)-8-hydroxy quinoline thin films
700
Effect of substitution in the scheelite-like series, AxBa1−xBi2Mo4O16 (A = Ca, Sr, Pb)
701
Effect of Substitution Inert Metal Complexes on Calcineurin
702
Effect of substitution of 1 at% Ni for Zn on the microstructure and mechanical properties of Mg94Y4Zn2 alloy
703
Effect of substitution of aluminum for nickel on electrochemical properties of La0.75Mg0.25Ni3.5−xCo0.2Alx hydrogen storage alloys
704
Effect of substitution of chromium for manganese on structure discharge characteristics of Ti-Zr-V-Mn-Ni-type muti-phase hydrogen storage electrode alloys
705
Effect of substitution of chromium for nickel on structure and electrochemical characteristic of Ti0.26Zr0.07V0.24Mn0.1Ni0.33 multi-phase hydrogen storage alloy
706
Effect of substitution of Fe3+Cr3+ on the alkylation of phenol with methanol over magnesium-aluminium calcined hydrotalcite Original Research Article
707
Effect of substitution of fly ash for quartz in triaxial kaolin–quartz–feldspar system
708
Effect of substitution of granulated slag by air-cooled slag on the properties of alkali activated slag
709
Effect of substitution of magnetic rare earth Nd at non-magnetic La site on structure and properties of LaSrFeO4
710
Effect of substitution of medium-chain organic acids for zinc bacitracin in a diet containing colistin on performance and development of intestinal lymphoid tissues in growing rabbits experimentally infected with Escherichia coli O103 and Clostridium perf
711
Effect of substitution of Mn3 by other trivalent cations on the colossal magnetoresistance and related properties of the manganates: La0.7A0.3Mn1−xMxO3 (A = Ca, Sr, Pb; M = Al, Cr, Fe, Co)
712
Effect of substitution of quartz by rice husk ash and silica fume on the properties of whiteware compositions
713
Effect of substitution of rare earth by mischmetal on the devitrification process of Al–X–Ni–Co (X = Y, Ce, Mm) alloys
714
Effect of substitution of shrimp meal, fish meal and soy meal with red crab Pleuroncodes planipes (Stimpson) meal in pelleted diets for postlarvae and juvenile Farfantepenaeus californiensis (Holmes)
715
Effect of substitution of Si with V and Mo on ionic conductivity of Na5YSi4O12-type glass-ceramics
716
Effect of substitution of sorghum stover with sugarcane top silage on ruminal dry matter degradability of diets and growth performance of feedlot hair lambs
717
Effect of substitution of soybean meal for inactive dry yeast on diet digestibility, lamb’s growth and meat quality
718
Effect of substitution of soybean meal with treated or untreated high glucosinolate mustard (Brassica juncea) meal on intake, digestibility, growth performance and body composition of calves
719
Effect of substitution of stevioside and sucralose on rheological, spectral, color and microstructural characteristics of mango jam Original Research Article
720
Effect of Substitution of Sugar by High Fructose Corn Syrup on the Physicochemical Properties of Bakery and Dairy Products: A Review
721
Effect of substitution of wood shavings by barley straws on the physico-mechanical properties of lightweight sand concrete
722
Effect of substitution on magnetization mechanism for Y-type hexagonal ferrite
723
Effect of substitution on novel tricyclic HIV-1 integrase inhibitors
724
Effect of Substitution on the 2+2 Cycloaddition Reaction of Phenylpropanoids
725
Effect of substitution pattern on 1H, 13C NMR chemical shifts and 1JCH coupling constants in heparin derivatives
726
Effect of substitutional elements on hydrogen absorption properties in ZrMnFe0.5Ni0.5 and ZrMnFe0.5Co0.5
727
Effect of substitutions on the hyperfine magnetic field in Nd-based intermetallics
728
Effect of substrate and annealing on the structural and optical properties of ZnO:Al films Original Research Article
729
Effect of substrate and cation requirement on anaerobic volatile fatty acid conversion rates at elevated biogas pressure
730
Effect of substrate and culture conditions on the production of amylase and pullulanase by thermophilic Clostridium thermosulforegenes SVM17 in solid state fermentation
731
Effect of substrate and embedded metallic impurities of fullerene in the determination of nandrolone Original Research Article
732
Effect of substrate and feed antibiotics on in vitro production of volatile fatty acids and methane in caecal contents of chickens
733
Effect of substrate and film thickness on the growth, structure, mechanical and optical properties of chromium diboride thin films
734
Effect of Substrate and Granules/Inocula Sizes on Biochemical Methane Potential and Methane Kinetics
735
Effect of substrate and harvest on the amino acid profile of Oyster mushroom (Pleurotus ostreatus)
736
Effect of substrate and harvest on the amino acid profile of Oyster mushroom (Pleurotus ostreatus)
737
Effect of substrate and protective coating on the tribological characteristics of optical recording media
738
Effect of substrate and subphase conditions on the surface morphology of graphene oxide sheets prepared by Langmuir–Blodgett technique
739
Effect of substrate and tackifier on peel strength of SIS (styrene-isoprene-styrene)-based HMPSAs
740
Effect of substrate angle on properties of ITO films deposited by cathodic arc ion plating with In–Sn alloy target
741
Effect of substrate annealing on the quality of pulsed laser deposited Zn1−xMgxO thin films
742
Effect of substrate atomic structure on intersolubility and alloying in Pd/Nb adsorption system
743
Effect of substrate bias and temperature on magnetron sputtered CrSiN films
744
Effect of substrate bias in amorphous carbon films having embedded nanocrystallites
745
Effect of substrate bias in nitrogen incorporated amorphous carbon films with embedded nanoparticles deposited by filtered cathodic jet carbon arc technique
746
Effect of substrate bias on microstructure and properties of Ni–TiN nanocomposite thin films deposited by reactive magnetron co-sputtering
747
Effect of substrate bias on SE, XPS and XAES studies of diamond-like carbon films deposited by saddle field fast atom beam source
748
Effect of substrate bias on the structure and properties of ion-plated ZrN on Si and stainless steel substrates
749
Effect of substrate bias on β-SiC films prepared by PECVD
750
Effect of Substrate Bias Voltage and Ti Doping on the Tribological Properties of DC Magnetron Sputtered MoSx Coatings
751
Effect of substrate bias voltage on corrosion of TiN/Ti multilayers deposited by magnetron sputtering
752
Effect of substrate bias voltage on the physical properties of dc reactive magnetron sputtered NiO thin films
753
Effect of substrate bias voltage on the properties of magnetron-sputtered gadolinium layers
754
Effect of substrate bias voltage on the structure, electric and dielectric properties of TiO2 thin films by DC magnetron sputtering
755
Effect of substrate bias voltages on the diffusion barrier properties of Zr–N films in Cu metallization
756
Effect of Substrate Chemical Surface Treatment on Surface Energy and the Influence towards Coating Adhesion
757
Effect of substrate compliance on the global unilateral post-buckling of coatings: AFM observations and finite element calculations
758
Effect of substrate compliance on the global unilateral post-buckling of coatings: AFM observations and finite element calculations Original Research Article
759
Effect of substrate composition on production of volatile organic compounds from Trichoderma spp. Inhibitory to wood decay fungi
760
Effect of substrate concentration and pH on biohydrogen production kinetics from food industry wastewater by mixed culture
761
Effect of substrate concentration on broth rheology and fungal morphology during exo-biopolymer production by Paecilomyces japonica in a batch bioreactor
762
Effect of substrate concentration on continuous Photo-fermentative hydrogen production from lactate using Rhodobacter sphaeroides
763
Effect of substrate concentration on dry mesophilic anaerobic digestion of organic fraction of municipal solid waste (OFMSW)
764
Effect of substrate concentration on fermentative hydrogen production from sweet sorghum extract
765
Effect of substrate concentration on the biotransformation of carbon tetrachloride and 1,1,1-trichloroethane under anaerobic condition
766
Effect of substrate conductivity on infrared reflection spectra of thin TiO2 films
767
Effect of substrate constraint on the stability and evolution of ferroelectric domain structures in thin films Original Research Article
768
Effect of substrate crystallographic orientation on wettability and adhesion in several representative systems
769
Effect of substrate curvature on residual stresses and failure modes of an air plasma sprayed thermal barrier coating system
770
Effect of substrate density on behaviour of antlion larvae (Neuroptera: Myrmeleontidae)
771
Effect of substrate dependence on microstructure and magnetoresistance of lanthanum manganite films
772
Effect of substrate doping concentration on quantum well states of Pb island grown on Si(1 1 1)
773
Effect of substrate doping on microstructure and reactivity of porous silicon
774
Effect of substrate flexibility on dynamic wetting: a finite element model Original Research Article
775
EFFECT OF SUBSTRATE FORMULATION OF RICE STRAW (ORYZA SATIVA) AND SAWDUST (TRIPLOCHITON SCLEROXYLON) ON THE CULTIVATION OF PLEUROTUS OSTREATUS (JACQ. EX. FR.) KUMMER
776
Effect of substrate hardness on the deformation behavior of subsequently incident particles in cold spraying
777
Effect of substrate load and nutrients concentration on the polyhydroxyalkanoates (PHA) production using mixed consortia through wastewater treatment
778
Effect of substrate loading rate of chemical wastewater on fermentative biohydrogen production in biofilm configured sequencing batch reactor
779
Effect of substrate manipulation on reducing ischemia/reperfusion injury in isolated perfused rat hearts
780
Effect of substrate mechanics on chondrocyte adhesion to modified alginate surfaces
781
Effect of substrate modulus on the fatigue behavior of adhesively bonded joints
782
Effect of substrate morphology on the roughness evolution of ultra thin DLC films
783
Effect of Substrate Nitrogen/Chemical Oxygen Demand Ratio on the Formation of Aerobic Granules
784
Effect of substrate on evaluation of the photocatalytic activity of TiO2 nanocrystals with exposed {0 0 1} facets
785
Effect of substrate on microstructure and mechanical properties of sol–gel prepared (K, Na)NbO3 thin films
786
Effect of substrate on surface morphology and photocatalysis of large-scale TiO2 films
787
Effect of substrate on surface morphology evolution of Cu thin films deposited by magnetron sputtering
788
Effect of substrate on the adsorption of polyelectrolyte multilayers: Study by optical fixed-angle reflectometry and AFM
789
Effect of substrate on the phase transformation of TiO2 in pearlescent pigment
790
Effect of substrate orientation on film properties using AC reactive magnetron sputtering
791
Effect of substrate oxidation on spreading of plasma-sprayed nickel on stainless steel
792
Effect of substrate particle size and additional nitrogen source on production of lignocellulolytic enzymes by Pleurotus ostreatus strains
793
Effect of substrate polarity on photocatalytic activity of titanium dioxide particles embedded in mesoporous silica
794
Effect of substrate potentials on the structural disorders of alkanethiol monolayers prepared by electrochemically directed assembly
795
Effect of substrate pre-coating on adhesion of sintered nickel plaques for electrode application in rechargeable batteries
796
Effect of substrate preparation and deposition conditions on the preferred orientation of TiN coatings deposited by RF reactive sputtering
797
Effect of substrate pretreatment on particle size distribution in a full-scale research biogas plant
798
Effect of substrate rotation on texture evolution in ZrO2-4 mol.% Y2O3 layers fabricated by EB-PVD
799
Effect of substrate roughness and thermal cycling to the deuterium permeation of the MOCVD derived alumina coatings
800
Effect of substrate roughness on the corrosion behaviour of the Al2O3/MA 956 system
801
Effect of substrate roughness on the fatigue behavior of a SAE 1045 steel coated with a WC–10Co–4Cr cermet, deposited by HVOF thermal spray
802
Effect of substrate stiffness on pulmonary fibroblast activation by TGF-β
803
Effect of substrate strain on lattice structure, electrical resistivity, and optical conductivity of thin films grown on
804
Effect of substrate structure on the performance of thin-film composite forward osmosis hollow fiber membranes
805
Effect of substrate surface defects on the morphology of Fe film deposited on graphite
806
Effect of substrate surface ion bombardment etching on reaction between chromium thin films and steel substrates
807
Effect of substrate surface modification on alumina composite sol–gel coatings
808
Effect of substrate surface roughening and cold spray coating on the fatigue life of AA2024 specimens
809
Effect of substrate surface roughness on wetting behaviour of vegetable oils
810
Effect of substrate surface temperature on the microstructure and ionic conductivity of lanthanum silicate coatings deposited by plasma spraying
811
Effect of substrate surface texture and flux coating on the evolution of microstructure during solidification of lead free Sn–3.5Ag solder alloy
812
Effect of substrate temperature and annealing temperature on the structural, electrical and microstructural properties of thin Pt films by rf magnetron sputtering
813
Effect of substrate temperature and deposition rate on the morphology and optical properties of Ti films
814
Effect of substrate temperature and insertion of layers on CoFe/Cu/NiFe spin valve trilayers
815
Effect of substrate temperature and oxygen partial pressure on microstructure and optical properties of pulsed laser deposited yttrium oxide thin films
816
Effect of substrate temperature and roughness on the solidification of copper plasma sprayed droplets
817
Effect of substrate temperature and source grain size on the structural and electrical properties of CSVT grown Cu(In1−xGax)Se2 thin films
818
Effect of substrate temperature and stages duration on recycling of agro-industrial residues through Pleurotus ostreatus production
819
Effect of substrate temperature on ac conduction properties of amorphous and polycrystalline GaSe thin films
820
Effect of substrate temperature on conductivity and microstructures of boron-doped silicon nanocrystals in SiCx thin films
821
Effect of substrate temperature on electrochromic properties of spray-deposited Ir-oxide thin films
822
Effect of substrate temperature on few-layer graphene grown on Al2O3 (0 0 0 1) via direct carbon atoms deposition
823
Effect of substrate temperature on gold-catalyzed silicon nanostructures growth by hot-wire chemical vapor deposition (HWCVD)
824
Effect of substrate temperature on growth process of GaAs on Si(1 1 0) vicinal surface studied by reflection high-energy electron diffraction
825
Effect of substrate temperature on microstructure and deuterium retention of molybdenum co-deposition with oxygen
826
Effect of substrate temperature on microstructure and optical properties of nanocrystalline alumina thin films
827
Effect of substrate temperature on optical, structural and electrical properties of FeSe thin films deposited by spray pyrolysis technique Original Research Article
828
Effect of substrate temperature on properties of diamond-like films deposited by combined DC impulse vacuum-arc method
829
Effect of substrate temperature on properties of multilayer thin film based on ZnO and Mo-doped indium oxide
830
Effect of substrate temperature on quality of copper film catalyst substrate: A Molecular Dynamics Study
831
Effect of substrate temperature on spontaneous GaN nanowire growth and optoelectronic properties
832
Effect of substrate temperature on spray deposited CdIn2Se4 thin films
833
Effect of substrate temperature on structural and optoelectrical properties of silver doped zinc oxide thin films
834
Effect of substrate temperature on structural, electrical and optical properties of sprayed tin oxide (SnO2) thin films
835
Effect of substrate temperature on structural, morphological and optical properties of deposited Al/ZnO films
836
Effect of substrate temperature on structural, optical and electrical properties of pulsed laser ablated nanostructured indium oxide films
837
Effect of substrate temperature on structure and electrical resistivity of laser-ablated IrO2 thin films
838
Effect of substrate temperature on the crystal growth orientation of SnO2:F thin films spray-deposited on glass substrates
839
Effect of substrate temperature on the crystallization of Pb(Zr,Ti)O3 films on Pt/Ti/Si substrates prepared by radio frequency magnetron sputtering with a stoichiometric oxide target
840
Effect of substrate temperature on the electrically conductive stability of sputtered NiO films
841
Effect of substrate temperature on the epitaxial growth of Au on TiO2(1 1 0)
842
Effect of substrate temperature on the growth and luminescence properties of ZnO nanostructures
843
Effect of substrate temperature on the growth of ITO thin films
844
Effect of substrate temperature on the mechanical and tribological properties of W/WC produced by DC magnetron sputtering
845
Effect of substrate temperature on the microstructure and properties of thick plasma-sprayed YSZ TBCs
846
Effect of substrate temperature on the morphology, structural and optical properties of Zn1−xCoxO thin films
847
Effect of substrate temperature on the optical properties of thermally evaporated ZnS thin films
848
Effect of substrate temperature on the phase change of Zn0.40Mn0.60Se thin films
849
Effect of substrate temperature on the physical properties of copper nitride films by r.f. reactive sputtering
850
Effect of substrate temperature on the properties of coatings and splats deposited by wire arc spraying
851
Effect of substrate temperature on the properties of pyrolytically deposited nitrogen-doped zinc oxide thin films
852
Effect of substrate temperature on the properties of Ti-doped ZnO films by simultaneous rf and dc magnetron sputtering
853
Effect of substrate temperature on the properties of TiO2 nanoceramic films
854
Effect of substrate temperature on the splat formation of flame sprayed polypropylene
855
Effect of substrate temperature on the structural and optical properties of MoO3 thin films prepared by spray pyrolysis technique
856
Effect of substrate temperature on the structural properties of magnetron sputtered titanium nitride thin films with brush plated nickel interlayer on mild steel
857
Effect of substrate temperature on the structural, electrical and optical properties of ZnO:Ga thin films prepared by RF magnetron sputtering
858
Effect of substrate temperature on the structural, electrical, and optical properties of GZO/ZnO films deposited by radio frequency magnetron sputtering
859
Effect of substrate temperature on the structural, optical and electrical properties of dc magnetron sputtered tantalum oxide films
860
Effect of substrate temperature on the structure and optical properties of CdTe thin film
861
Effect of substrate temperature on the structure of Ag–Cd condensates
862
Effect of Substrate Temperature on the Surface of Cathodic Cage Plasma Nitrided Aisi 430 Ferritic Stainless Steel
863
Effect of substrate temperature on the surface structure, composition and morphology of indium–tin oxide films
864
Effect of substrate temperature on ZnS films prepared by thermal evaporation technique
865
Effect of substrate temperatures on the electrical resistivity of thermally evaporated Mn thin films Original Research Article
866
EFFECT OF SUBSTRATE TEXTURE AND DEPOSITION CURRENT DENSITY ON PROPERTIES OF NiNANOCRYSTALLINE ELECTRODEPOSITS
867
Effect of substrate texture on the growth of hematite nanowires
868
Effect of substrate thermal gradient on as-grown CuInS2 properties
869
Effect of substrate type on nanostructured titania sol–gel coatings for sensors applications
870
Effect of substrate type on the field performance and chemical composition of highbush blueberry cv. Patriot
871
Effect of substrate-film interface on magnetic properties of Mn4N films
872
Effect of substrate-induced strain on the morphological, electrical, optical and photoconductive properties of RF magnetron sputtered ZnO thin films
873
Effect of substrates and anions of zinc salts on the morphology of ZnO nanostructures
874
Effect of substrates consisting of organic waste processed by diplopods on production of lettuce seedlings
875
Effect of substrates on growth and shelf life of Trichoderma harzianum and its use in biocontrol of diseases
876
Effect of substrates on microstructure and mechanical properties of nano-eutectic 1080 steel produced by aluminothermic reaction
877
Effect of substrates on phase formation in PMN-PT 68/32 thin films by sol–gel process
878
Effect of substrates on the melting temperature of gold nanoparticles
879
Effect of substrates on the melting temperature of gold nanoparticles
880
Effect of substrates on the photocatalytic activity of nanometer TiO2 thin films
881
Effect of substrates on the properties of p-type ZnO films
882
Effect of substrate-seed mixing and leachate recirculation on solid state digestion of biowaste
883
Effect of Substructure on Toughness of Lath Martensite/Bainite Mixed Structure in Low-Carbon Steels Original Research Article
884
Effect of substructures upon failure behavior of steel reticulated domes subjected to the severe earthquake
885
Effect of subsurface boron on photoluminescence from silicon nanocrystals
886
Effect of subsurface damage on indentation behavior of ground ULE™ glass
887
Effect of subsurface drainage on nutrient pollution of surface waters in south eastern Albania
888
Effect of subsurface drainage on water balance and water table in poorly drained paddy fields
889
Effect of Subsurface Drip Irrigation on Cotton Plantations
890
Effect of subsurface drip irrigation on processing tomato yield, water table depth, soil salinity, and profitability
891
Effect of subsurface heterogeneity on free-product recovery from unconfined aquifers
892
Effect of subsurface hydrological properties on velocity and attenuation of compressional and shear wave in fluid-saturated viscoelastic porous media
893
Effect of subvoxel processes on non-destructive characterization of β-tricalcium phosphate bone graft substitutes
894
Effect of sub-zero (cryogenic) and water-cool chilling on solidification and mechanical behavior of cast iron
895
Effect of sub-zero (cryogenic) and water-cool chilling on solidification and mechanical behavior of cast iron
896
Effect of Successful Alcohol Septal Ablation on Microvascular Function in Patients With Obstructive Hypertrophic Cardiomyopathy
897
Effect of successful electrical cardioversion on serum aldosterone in patients with persistent atrial fibrillation
898
Effect of successful late reperfusion by primary coronary angioplasty on mechanical complications of acute myocardial infarction
899
Effect of successive cauliflower plantings and Rhizoctonia solani AG 2-1 inoculations on disease suppressiveness of a suppressive and a conducive soil
900
Effect of successive cauliflower plantings and Rhizoctonia solani AG 2-1 inoculations on disease suppressiveness of a suppressive and a conducive soil
901
Effect of successive electrospinning and the strength of hydrogen bond on the morphology of electrospun nylon-6 nanofibers
902
Effect of Successive Meso-Phenyl Substitution on the Dissociation Kinetics of Copper(II) Octaethylporphyrin
903
Effect of succinylation on the corn and amaranth starch pastes
904
Effect of succinylation on the physicochemical, rheological, thermal and retrogradation properties of red and white sorghum starches
905
Effect of succinylation on the rheological profile of starch pastes
906
Effect of suckling management on productive performance, carcass traits and meat quality of Comisana lambs
907
Effect of suckling on basal and GnRH-induced LH release in post-partum dairy buffaloes
908
Effect of suckling on growth and quantitative and qualitative carcass traits of once-calved heifers
909
Effect of suckling restriction with nose plates and premature weaning on postpartum anestrous interval in primiparous cows under range conditions
910
Effect of sucralfate on total carbon dioxide concentration in horses subjected to a simulated race test
911
Effect of Sucrose Acetate Isobutyrate (SAIB) Ingestion on the Hepatobiliary Function of Normal Human Male and Female Volunteers
912
Effect of sucrose addition to drinking water, that induces hypertension in the rats, on liver microsomal Δ9 and Δ5-desaturase activities
913
Effect of sucrose and safflower oil preloads on short term appetite and food intake of young men
914
Effect of sucrose concentration on photosynthetic activity of in vitro cultures Gentiana kurroo (Royle) germlings
915
Effect of sucrose concentration on the products of Kombucha fermentation on molasses
916
Effect of sucrose ester concentration on the interfacial characteristics and physical properties of sodium caseinate-stabilized oil-in-water emulsions
917
Effect of Sucrose Esters on the Physicochemical Properties of Wheat Starch
918
Effect of sucrose fatty acid esters on pasting, rheological properties and freeze–thaw stability of rice flour
919
Effect of sucrose fatty acid esters on the particle characteristics and flow properties of phytosterol nanodispersions Original Research Article
920
Effect of sucrose on agarose gels mechanical behaviour
921
Effect of sucrose on dynamic mechanical characteristics of maize and potato starch films
922
Effect of sucrose on dynamic mechanical characteristics of maize and potato starch films
923
Effect of sucrose on retardation of Portland cement
924
Effect of sucrose on rheological properties of aqueous zirconia suspensions with polyacrylate
925
Effect of Sucrose on Sedation in Fasting Children in Waiting Room before Entrance to Operating Room
926
Effect of sucrose on starch—hydrocolloid interactions
927
Effect of sucrose on the freeze–thaw stability of rice starch gels: Correlation with microstructure and freezable water
928
Effect of sucrose on the freeze–thaw stability of rice starch gels: Correlation with microstructure and freezable water
929
Effect of sucrose on the phase and flow behaviour of polysaccharide/protein aqueous two-phase systems
930
EFFECT OF SUCROSE ON THE PHYSIOLOGY AND TERRESTRIC ACID PRODUCTION OF PENICILLIUM AURANTIOGRISEUM
931
Effect of sucrose on the textural properties of corn and wheat extrudates
932
Effect of sucrose, glucose and fructose on gelation of oxidised starch
933
Effect of sucrose, stevia and xylitol on rheological properties of gels from blends of chestnut and rice flours
934
effect of sucrosomial® iron and iron drop diluted with natural fruit juice on microhardness of primary enamel
935
Effect of suction/injection on the flow of a micropolar fluid past a continuously moving plate in the presence of radiation
936
Effect of Sudarshan Kriya Pranayama on periodontal status and human salivary beta‑defensin‑2: An interventional study
937
Effect of sudden changes in evaporator external parameters on a refrigeration system with an evaporator controlled by a thermostatic expansion valve
938
Effect of sugar and NaCl soaking treatments on the quality of sweet banana figs Original Research Article
939
Effect of sugar and sorbitol on the formation of low methoxyl pectin gels
940
Effect of sugar beet as a trap crop on the population density of Meloidogyne incognita infecting subsequent common dry bean
941
Effect of sugar beet plant residues on population density of root knot nematode, Meloidogyne incognita infecting cowpea and biochemical changes in treated plants
942
Effect of sugar composition on the water sorption and softening properties of cookie
943
Effect of sugar on the rheological properties of sunflower oil–water emulsions Original Research Article
944
Effect of sugar replacement with date paste and date syrup on texture and sensory quality of kesari (traditional Indian dessert)
945
Effect of sugar replacement with date syrup on physicochemical and sensory properties of quince jam
946
Effect of sugar type and concentration on the heat coagulation of oil-in-water emulsions stabilized by milk-protein-concentrate
947
Effect of sugar types on physical attributes and crystalline structure of sweet-dried chicken meat product
948
Effect of sugar, citric acid and egg white type on the microstructural and mechanical properties of meringues Original Research Article
949
Effect of sugar, cocoa particles and lecithin on cocoa butter crystallisation in seeded and non-seeded chocolate model systems Original Research Article
950
Effect of Sugarcane Bagasse and Sunflower Hull on Productive Performance, Egg Quality, Tibia Characteristics, and Cecal Microbial Population of Laying Hens Raised in High Stocking Densities
951
Effect of sugarcane biomass waste in cement slurries submitted to high temperature and pressure
952
Effect of sugarcane diets and a high fibre commercial diet on fresh meat and dry-cured ham quality in local Caribbean pigs
953
Effect of sugarcane filter cake-based organomineral fertilizers on sweet maize growth
954
Effect of sugarcane residue management (mulching versus burning) on organic matter in a clayey Oxisol from southern Brazil
955
Effect of Sugar-Free Gum in Addition to Tooth Brushing on Dental Plaque and Interdental Debris
956
Effect of sugars and polyols on the functional and mechanical properties of pressure-treated arrowtooth flounder (Atheresthes stomias) proteins
957
Effect of sugars and sugar alcohols on freezing behavior of corn starch gel as monitored by time domain 1H NMR spectroscopy
958
Effect of Sugars in Solutions on Immediate and Delayed Word List Recall in Normal Weight Boys
959
Effect of sugars on amino acid transport by symbiotic Chlorella
960
Effect of sugars on characteristics of Boer goat semen after cryopreservation
961
Effect of sugars on maturation rate of vitrified-thawed immature porcine oocytes
962
Effect of sugars on the development of oxidative stress induced by hypothermia in potato plants expressing yeast invertase gene
963
Effect of sugars on the mechanical and thermal properties of agarose gels
964
Effect of sugars on the rheological properties of acid caseinate-stabilized emulsion gels
965
Effect of sugars, galactose content and chainlength on freeze–thaw gelation of galactomannans
966
Effect of Sulfadoxine-Pyrimethamine and Artesunate on Gastric Acid Secretion and Parietal Cell Mass in Rats
967
Effect of sulfate and citrate salts on derivatization of amylose and amylopectin during hydroxypropylation of corn starch
968
Effect of sulfate concentration and associated cation type on concrete deterioration and morphological changes in cement hydrates
969
Effect of sulfate concentration and scraping on aerobic fixed biofilm reactors
970
Effect of sulfate content on cement mixtures
971
Effect of sulfate ions and associated cation type on the pore solution chemistry in chloride-contaminated plain and blended cements
972
Effect of sulfate ions for sol–gel synthesis of titania photocatalyst Original Research Article
973
Effect of Sulfate Ions on YAG Powders Synthesized by Microwave Homogeneous Precipitation
974
Effect of sulfate level on selenium uptake by Ruppia maritima
975
Effect of sulfate on methanol degradation in thermophilic (55 °C) methanogenic UASB reactors
976
Effect of Sulfate Reduced Bacterium on Corrosion Behavior of 10CrMoAl Steel Original Research Article
977
Effect of sulfate reducing bacteria on corrosion of stainless steel 1Cr18Ni9Ti in soils containing chloride ions
978
Effect of sulfate reduction activity on biological treatment of hexavalent chromium [Cr(VI)] contaminated electroplating wastewater under sulfate-rich condition Original Research Article
979
Effect of sulfate solution on the frost resistance of concrete with and without steel fiber reinforcement
980
Effect of sulfates on bond behavior between carbon fiber reinforced polymer sheets and concrete
981
Effect of sulfation methods on TiO2–SiO2 sol–gel catalyst acidity Original Research Article
982
Effect of sulfation on CO2 capture of CaO-based sorbents during calcium looping cycle
983
Effect of sulfation on the physicochemical and biological properties of citrus pectins
984
Effect of Sulfhydryl and non-Sulfhydryl Angiotensin-Converting Enzyme Inhibitors on Endothelial Function in Essential Hypertensive Patients
985
Effect of sulfidation atmosphere on the hydrodesulfurization activity of SiO2-supported Co–Mo sulfide catalysts: Local structure and intrinsic activity of the active sites
986
Effect of sulfidation on Mo-W-Ni trimetallic catalysts in the HDS of DBT
987
Effect of sulfidation temperature on the catalytic activity of MoO3/CeO2–Al2O3 toward sulfur-resistant methanation Original Research Article
988
Effect of sulfidation temperature on the intrinsic activity of Co–MoS2 and Co–WS2 hydrodesulfurization catalysts
989
Effect of sulfide impurities on the reactivity of pyrite and pyritic concentrates: a multi-tool approach
990
Effect of sulfide ions on the corrosion behaviour of Al–brass and Cu10Ni alloys in salt water
991
Effect of sulfide on the immune response and susceptibility to Vibrio alginolyticus in the kuruma shrimp Marsupenaeus japonicus
992
Effect of sulfide pollution on the stability of the protective film of benzotriazole on copper
993
Effect of sulfide to nitrate ratios on the simultaneous anaerobic sulfide and nitrate removal
994
Effect of sulfide, selenite and mercuric mercury on the growth and methylation capacity of the sulfate reducing bacterium Desulfovibrio desulfuricans Original Research Article
995
Effect of sulfiding pressure on the formation of the Ni site on View the MathML source and View the MathML source
996
Effect of sulfite on macrophage functions of normal and sulfite oxidase-deficient rats
997
Effect of sulfo-N-succinimidyl palmitate on the rat heart: Myocardial long-chain fatty acid uptake and cardiac hypertrophy
998
Effect of sulfonylurea herbicides residues on growth and yield of sunflower in rotation with wheat
999
Effect of sulfonylurea herbicides residues on growth and yield of sunflower in rotation with wheat
1000
Effect of sulfoxides on the thermal denaturation of hen lysozyme: A calorimetric and Raman study
