<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Process optimization strategies to diminish variability in the quality of discrete packaged foods during thermal processing Original Research Article
2
Process optimization studies of 10-Hydroxycamptothecin (HCPT)-loaded folate-conjugated chitosan nanoparticles by SAS-ionic crosslink combination using response surface methodology (RSM)
3
Process optimization studies of Congo red dye adsorption onto cashew nut shell using response surface methodology
4
Process optimization studies of lead (Pb(II)) biosorption onto immobilized cells of Pycnoporus sanguineus using response surface methodology
5
Process optimization studies of p-xylene separation from binary xylene mixture over silicalite-1 membrane using response surface methodology
6
Process optimization studies of structured Cu–ZSM-5 zeolite catalyst for the removal of NO using design of experiments (DOE)
7
Process optimization to convert forage and sweet sorghum bagasse to ethanol based on ammonia fiber expansion (AFEX) pretreatment
8
Process Options in Hepatitis B Surface Antigen Extraction from Transgenic Potato
9
Process Oriented Data Virtualization Design Model for Business Processes Evaluation(PODVDM) Research in Progress
10
Process Oriented Guided Inquiry Learning as an Innovative Teaching Method in Clinical Biochemistry: Piloting of the Process
11
Process oriented industrial classification based on energy intensity
12
Process Parameter Analysis and process understanding — Some industrial examples
13
Process parameter dependent property studies on CdO films prepared by DC reactive magnetron sputtering
14
Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique
15
Process parameter influence on defects and tensile properties of friction stir welded T-joints on AA6061-T4 sheets
16
Process parameter influence on performance of friction taper stud welds in AISI 4140 steel
17
Process parameter optimization based on principal components analysis during machining of hardened steel
18
Process parameter optimization for instant pigeonpea dhal using response surface methodology Original Research Article
19
Process parameter optimization for MIMO plastic injection molding via soft computing
20
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry
21
Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel
22
Process parameter selection for strontium ferrite sintered magnets using Taguchi L9 orthogonal design
23
Process parameters analysis of direct laser sintering and post treatment of porcelain components using Taguchiʹs method
24
Process parameters and morphology in amoxicillin micro and submicro particles generation by supercritical antisolvent precipitation
25
Process parameters and products quality analysis of flexible-die deep-drawing using a viscoplastic pressure-carrying medium
26
Process parameters design of a three-dimensional and five-directional braided composite joint based on finite element analysis
27
Process parameters determination of phosphorescent pigment added, frit-based wall tiles vetrosa decorations
28
Process parameters influencing melt profile and hardness of pulsed laser treated Ti–6Al–4V
29
Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods
30
Process Parameters Optimization in Gas Blow Forming of Pin-type Metal Bipolar Plates using Taguchi and Finite Element Methods
31
Process Parameters Optimization of Potential SO42-/ ZnO Acid Catalyst for Heterogeneous Transesterification of Vegetable Oil to Biodiesel
32
PROCESS PARAMETERS OPTIMIZATION ON PORTHOLE-DIE HOT EXTRUSION OF ALUMINIUM ALLOY TUBES USING TAGUCHI METHOD
33
Process Parameters Optimization to Improve Dimensional Accuracy of Stereolithography Parts
34
Process parameters selection for friction surfacing applications using intelligent decision support
35
Process parametric study for the recovery of very-fine size uranium values on super-conducting high gradient magnetic separator
36
Process performance evaluation of intermittent–continuous stirred tank reactor for anaerobic hydrogen fermentation with kitchen waste
37
Process performance monitoring in the presence of confounding variation
38
Process performance monitoring using multivariate statistical process control
39
Process Performance of a Granular Single Bioreactor with Continuous Feeding and Intermittent Discharge Regime Treating Dairy Wastewater
40
Process performances and characteristics of powders produced using supercritical CO2 as solvent and antisolvent
41
Process planning and machining of generic virtual pockets by feature-composition approach
42
Process planning for circuit card assembly on a series of dual head placement machines
43
Process planning for collaborative product development with CD-DSM in optoelectronic enterprises
44
Process planning for IT-equipment remanufacturing
45
Process planning for laser-assisted forming
46
Process planning for manual PWB assembly
47
Process planning in a fuzzy environment
48
Process quality improvement: An examination of general vs. outcome-specific climate and practices in hospitals
49
Process quality improvement: An examination of general vs. outcome-specific climate and practices in hospitals
50
Process quality of classroom discourse: Pupil participation and learning opportunities
51
Process reagents for the enhanced removal of solids and water from oil sand froth
52
Process recognition in multi-element soil and stream-sediment geochemical data
53
Process recording: of what value is examining nursing interaction through assignment work?
54
Process recovery of biohydrogenation in a pilot plant from methanogens invasion
55
Process reengineering and the dynamic balance of the organisation
56
Process reengineering in the public sector: Learning some private sector lessons
57
Process related mechanical properties of press molded natural fiber reinforced polymers
58
Process reliability and safety under uncertainties
59
Process repeatability in abrasive jet micro-machining
60
Process Requirements for Cost-Effective Precision Grinding
61
Process research in strategy formation: Theory, methodology and relevance
62
Process reverse engineering for BPR: A form-based approach
63
Process Rewrite Systems
64
Process robustness of single lap ultrasonic welding of thin, dissimilar materials
65
Process safeguarding throughout the product life cycle
66
Process sampling module coupled with purge and trap–GC–FID for in situ auto-monitoring of volatile organic compounds in wastewater
67
Process scale separation of an anti-CD22 immunotoxin charge variant
68
Process Scheduling in DSC and the Large Sparse Linear Systems Challenge
69
Process semantics of general inhibitor nets
70
Process sensitivity and robustness analysis of via-first dual-damascene process
71
Process Sequence Development for Automated Progressive Freeze Concentration System
72
Process setup adjustment with quadratic loss
73
Process simulation and CFD calculations for the development of an innovative baled biomass-fired combustion chamber
74
Process simulation and economic analysis of the Calcium Looping Process (CLP) for hydrogen and electricity production from coal and natural gas
75
Process simulation and economical evaluation of enzymatic biodiesel production plant
76
Process Simulation and Microstructure Analysis of Low Carbon Si-Mn Quenched and Partitioned Steel Original Research Article
77
Process simulation and optimization of methanol production coupled to tri-reforming process
78
PROCESS SIMULATION AND QUALITY EVALUATION OF INCREMENTAL SHEET FORMING
79
Process simulation at electron beam lithography on different substrates
80
Process simulation for fuel delivery from storage and delivery system in fusion power plant
81
Process simulation for hydrogen/deuterium exchange in a packed column
82
Process simulation in stamping – recent applications for product and process design
83
Process simulation of a hybrid SOFC/mGT and enriched air/steam fluidized bed gasifier power plant
84
Process simulation of a SOFC and double bubbling fluidized bed gasifier power plant
85
Process simulation of co-firing torrefied biomass in a 220 MWe coal-fired power plant
86
Process simulation of desalination by electrodialysis of an aqueous solution containing a neutral solute Original Research Article
87
process simulation of ethanol production from jerusalem artichoke stalk
88
Process simulation of micro electro-discharge machining on molybdenum
89
Process simulation of modified dry grind ethanol plant with recycle of pretreated and enzymatically hydrolyzed distillers’ grains
90
Process simulation of natural gas steam reforming: Fuel distribution optimisation in the furnace
91
Process simulation of oxy-fuel combustion for a 300 MW pulverized coal-fired power plant using Aspen Plus
92
Process simulation of the transport gasifier
93
Process Simulation on Fast Pyrolysis of Palm Kernel Shell for Production of Fuel
94
Process simulations of HI decomposition via reactive distillation in the sulfur–iodine cycle for hydrogen manufacture
95
Process situation assessment: From a fuzzy partition to a finite state machine
96
Process Stability in the Tube Hydroforming Process
97
Process stabilization and a significant enhancement of the deposition rate in reactive high-power impulse magnetron sputtering of ZrO2 and Ta2O5 films
98
Process stabilization and enhancement of deposition rate during reactive high power pulsed magnetron sputtering of zirconium oxide
99
Process standardization and kinetics of ethanol driven biodieselproduction by transesterification of ricebran oil
100
Process standardization, characterization and storage study of a sweet potato (Ipomoea batatas L.) wine
101
Process stationarity and reliability of trunk postural stability
102
Process stress simulation of medium-high carbon steel after hard-face-welding during martensite transformation
103
Process structure properties relationship during formation of CrN and AlN layers on H13 Steel
104
Process studies of odour emissions from effluent ponds using machine-based odour measurement
105
Process studies on the ecological coupling between sea ice algae and phytoplankton
106
Process studies on the ecological coupling between sea ice algae and phytoplankton
107
Process study of circulation in the Pearl River Estuary and adjacent coastal waters in the wet season using a triply-nested circulation model
108
Process supervision by means of a hybrid model
109
Process support in learning tasks for acquiring complex cognitive skills in the domain of law
110
Process surveillance: An epidemiologic challenge for all health care organizations
111
Process synthesis for reactive separations
112
Process System Engineering (PSE) Analysis on Process and Optimization of the Isomerization Process
113
Process system engineering in biodiesel production: A review
114
Process system engineering in direct methanol fuel cell
115
Process system identification strategies based on the use of singular spectrum analysis
116
Process Systems ’05
117
Process systems and passivity via the Clausius-Planck inequality
118
Process technologies, learning and brand proliferation
119
Process technology development at Rand Refinery
120
Process technology for multi-enzymatic reaction systems
121
Process technology for production of soluble tea powder Original Research Article
122
Process Technology for the Continuous Hot Band Annealing of 17%Cr Ferritic Stainless Steel
123
Process Technology study of TiN/AlGaN/GaN Schottky contact on (111) Silicon substrate
124
Process testing of aerators in oxidation ditches
125
Process thinking in support of system specification and selection
126
Process to identify disjoint subclasses and class life cycle information using a role analysis technique
127
Process to Write American College of Cardiology Foundation/American Heart Association Guidelines in Need of Overhaul
128
Process trend analysis using wavelet-based de-noising
129
Process type identification in torrential catchments in the eastern Alps
130
Process utility and help seeking: What do people want from experts?
131
Process variability in honing of cylinder liner with vitrified bonded diamond tools
132
Process variables in the formation of nanoparticles of megestrol acetate through rapid expansion of supercritical CO2
133
Process variables in the treatment of sexual offenders: A review of the relevant literature
134
Process vectors both to create functional structures and to represent characteristics of an entire system
135
Process virtualization of large-scale lidar data in a cloud computing environment
136
Process Water Management
137
Process water production from river water by ultrafiltration and reverse osmosis
138
Process window enhancement for single point incremental forming through multi-step toolpaths
139
Process window for the synthesis of Ag wires through polyol process
140
Process Writing and Enhancement of Critical Thinking Ability: Is Writing a Vehicle or an Ingredient of Critical Thinking?
141
Process zone resolution by extended finite elements
142
Process, form and change in dryland rivers: a review of recent research
143
Process, microstructure and flexural properties of reaction sintered Tyranno SA/SiC composites
144
Process, optimization and characterization of mebeverine hydrochloride loaded guar gum microspheres for irritable bowel syndrome
145
Process, Paratexts, and Texts: Rhetorical Analysis and Virtual Worlds
146
Process, perception, and practice: Time perspectivism in Yosemite native demography
147
Process, Physicochemical Characterization and In-Vitro Assessment of Albendazole Microcrystals
148
Process, practice and priorities — key lessons learnt undertaking sensitive social reconnaissance research as part of an (UNESCO-IOC) International Tsunami Survey Team
149
Process, structure and context in relation to integrative biology
150
Processability and Miscibility of Linear Low-densityPolyethylene/Poly(vinyl alcohol) Blends: In SituCompatibilization with Maleic Acid
151
Processability and Properties of Biodegradable Plastics Made from Agricultural Biopolymers
152
Processability and Properties of Biodegradable Plastics Made from Agricultural Biopolymers
153
Processability characteristics and physico-mechanical properties of natural rubber modified with cashewnut shell liquid and cashewnut shell liquid–formaldehyde resin
154
Processability of PVDF/PMMA blends studied by torque rheometry
155
Processability Study of ABS Impact Modified PVC-U Composites - Effect of Rice Husk Ash (RHA) Fillers and Coupling Agents
156
Processability Theory: Stage-like Development of ‘Copula inversion’ and ‘Negation’ in Iranian EFL Learners’ Writing Performance
157
processability theory: stage-like development of “3 sg-s” and “cancel auxsecond” in iranian efl learners’ writing performance
158
Processability Theory: Stage-like Development of “3 sg-s” and “cancel aux-second” in Iranian EFL Learners’ Writing Performance
159
Processable forms of conductive polyaniline
160
Processable magnetic plastics composites—spin crossover of PMMA/Fe(II)-complexes composites
161
Processable polyaniline suspensions through in situ polymerization onto nanocellulose
162
Processable polyaniline/titania nanocomposites with good photocatalytic and conductivity properties prepared via peroxo-titanium complex catalyzed emulsion polymerization approach
163
Processable polyaniline–titanium dioxide nanocomposites: effect of titanium dioxide on the conductivity
164
Processable stabilizer-free polyaniline nanofiber aqueous colloids
165
PROCESS-ALTERED SURFACE CONVECTION EFFECTS IN A COUPLED THERMOELASTIC ANALYSIS OF RAPID SLIDING INDENTATION WITH FRICTION
166
Process-aware information systems: Bridging people and software through process technology
167
Process-based 2DH morphodynamic modeling of tidal inlets: A comparison with empirical classifications and theories
168
Process-based environmental communication and conflict mitigation during sudden pollution accidents
169
Process-based groundwater salinisation risk assessment methodology: Application to the Akrotiri aquifer (Southern Cyprus)
170
Process-based humidity control regime for greenhouse crops
171
Process-based interpretation of tracer tests in carbonate aquifers
172
Process-based investigation of cross-boundary environmental pressure from urban household consumption
173
Process-based leadership: Fair procedures and reactions to organizational change
174
PROCESS-BASED LEARNING: TOWARDS THEORETICAL AND LECTURE-BASED COURSEWORK IN STUDIO STYLE
175
Process-based modeling of grassland dynamics built on ecological indicator values for land use
176
Process-based modeling of grassland dynamics built on ecological indicator values for land use
177
Process-Based Modeling of Timothy Regrowth
178
Process-based modelling of invertebrate drift transport, net energy intake and reach carrying capacity for drift-feeding salmonids
179
Process-based modelling of invertebrate drift transport, net energy intake and reach carrying capacity for drift-feeding salmonids
180
Process-based modelling of isoprenoid emissions from evergreen leaves of Quercus ilex (L.)
181
Process-based models for port evolution and wreck site formation at Mombasa, Kenya
182
Process-based reactive transport modeling of a permeable reactive barrier for the treatment of mine drainage
183
Process-based research in sustainable agricultural development: integrating social, economic and ecological perspectives
184
Process-based simulation library SALMO-OO for lake ecosystems. Part 1: Object-oriented implementation and validation
185
Process-based simulation library SALMO-OO for lake ecosystems. Part 2: Multi-objective parameter optimization by evolutionary algorithms
186
Process-based snowmelt modeling: does it require more input data than temperature-index modeling?
187
Process-based tolerance assessment of connecting rod machining process
188
Process-centered knowledge model and enterprise ontology for the development of knowledge management system
189
Process-centred restoration in a fire-adapted ponderosa pine forest
190
Process-centric engineering Web services in a distributed and collaborative environment
191
Process-condition-driven Automatic Location of Components
192
Process-diagnostic patterns of chlorobiphenyl congeners in two radiochronologically characterized sediment cores from the northern Baffin Bay Original Research Article
193
Processed Allogenic Dentine as A Scaffold for Bone Healing: An in vivo study.
194
Processed cereals in diets for early-weaned piglets
195
Processed Cheese Analogues Incorporating Fat-Substitutes 1. Composition, Microbiological Quality and Flavour Changes During Storage at 5 °C
196
Processed Cheese Analogues Incorporating Fat-Substitutes 2. Rheology, Sensory Perception of Texture and Microstructure
197
Processed EEG and patient outcome
198
Processed EEG in natural sleep
199
Processed food exports from developing countries: patterns and determinants
200
Processed food trade and developing countries: protection and trade liberalization
201
Processed kaolin protects fruits from Mediterranean fruit fly infestations
202
Processed optimization for excellent interface passivation quality of amorphous/crystalline silicon solar cells
203
PROCESSED PRODUCTS OF TERMITES AND LAKE FLIES: IMPROVING ENTOMOPHAGY FOR FOOD SECURITY WITHIN THE LAKE VICTORIA REGION
204
Processed pulverized fuel ash for high-performance concrete
205
Processes active in mafic magma chambers: The example of Kilauea Iki Lava Lake, Hawaii
206
Processes affecting concentrations of fine particulate matter (PM2.5) in the UK atmosphere
207
Processes affecting deposition of oxidised nitrogen and associated species in the coastal areas of Norway
208
Processes affecting groundwater chemistry in a zone of saline intrusion into an urban sandstone aquifer
209
Processes affecting the distribution of dissolved trace metals in the North Aegean Sea (Eastern Mediterranean)
210
Processes affecting transport of uranium in a suboxic aquifer
211
Processes affecting δ34S and δ18O values of dissolved sulfate in alluvium along the Canadian River, central Oklahoma, USA
212
Processes and apparatuses for formation, separation, pelletizing storage and re-gasification of gas hydrate
213
Processes and Boundaries of the Mind: Extending the Limit Line: Yair Neuman, Kluwer Academic/Plenum Publishers, New York, 2003, 170 pages
214
Processes and continuous change in a SAT-based planner Original Research Article
215
Processes and impacts of Arctic amplification: A research synthesis
216
Processes and key properties of pool materials for “bubble fusion”
217
Processes and mechanisms controlling consumption of CFC-11 and CFC-12 by peat from a conifer-swamp and black spruce-tamarack bog in New York State
218
Processes and mechanisms of desertification in northern China during the last 30 years, with a special reference to the Hunshandake Sandy Land, eastern Inner Mongolia
219
Processes and methods for research programme priority setting: the experience of the Kenya Agricultural Research Institute Wheat Programme
220
PROCESSES AND OUTCOMES IN THREE-DIMENSIONAL MATCH AND MISMATCH CIRCUMSTANCES IN RESPECT OF LEADERSHIP STYLES, FOLLOWERSHIP STYLES AND SITUATIONAL DEMANDS IN BUSINESS ORGANISATIONS IN PAPUA NEW GUINEA
221
Processes and outcomes of story-based and skill-based social competency programs for children with emotional disabilities
222
Processes and outcomes: a comparison between specialist and generalist clinicians
223
Processes and phenomena of purity decrease during the optical resolution of dl-threonine by preferential crystallization
224
Processes and products of grounding-line fans from the Permian Pagoda Formation, Antarctica: Insight into glacigenic conditions in polar Gondwana
225
Processes and properties of snow–air transfer in the high Arctic with application to interstitial ozone at Alert, Canada
226
Processes and rate of retreat of the clay and sandstone sea cliffs of the northern Boulonnais (France)
227
Processes and rates of ice loss at the terminus of Tasman Glacier, New Zealand
228
Processes and rates of rock fragment displacement on cliffs and scree slopes in an amba landscape, Ethiopia
229
Processes and structures for generation of hydrophobic surfaces for large-scale and industrial operations
230
Processes and time-scales of energy loss of low-energy electrons (<5 eV) in liquid water
231
Processes and timescales of magma evolution prior to the Campanian Ignimbrite eruption (Campi Flegrei, Italy)
232
Processes Branching: Variation, Growth, and Extinction of Populations, Patsy Haccou, Peter Jagers, Vladimir A. Vatutin. Cambridge University Press, Cambridge, UK (2005), ISBN: 13 978-0-521-83220-9
233
Processes controlling 220Rn concentrations in the gas and water phases of porous media
234
Processes controlling ammonia emission from livestock slurry in the field
235
Processes controlling annual variations in the partial pressure of CO2 in surface waters of the central northwestern Mediterranean Sea (Dyfamed site)
236
Processes controlling aquifer fluid compositions in the Olkaria geothermal system, Kenya
237
Processes controlling cobalt distribution in two temperate estuaries, Sagami Bay and Wakasa Bay, Japan
238
Processes controlling diurnal variations of PCDD/Fs in the New Jersey coastal atmosphere
239
Processes controlling forms of phosphorus in surficial sediments from the eastern Arabian Sea impinged by varying bottom water oxygenation conditions
240
Processes controlling highly siderophile element fractionations in xenolithic peridotites and their influence on Os isotopes
241
Processes controlling interannual variations in wintertime (Northeast Monsoon) primary productivity in the central Arabian Sea
242
Processes controlling manganese distributions and associations in organic-rich freshwater aquatic systems: The example of Loch Bradan, Scotland Original Research Article
243
Processes controlling metal transport and retention as metal-contaminated groundwaters efflux through estuarine sediments
244
Processes controlling sediment yield from watersheds as functions of spatial scale
245
Processes controlling silica concentration in leaching and capillary soil solutions of an acidic brown forest soil (Rhône, France)
246
Processes controlling solubility of biogenic silica and pore water build-up of silicic acid in marine sediments
247
Processes controlling the composition of clastic sediments : Mark J. Johnsson and Abhijit Basu (Eds) Geological Society of America Special Paper 284; 1993; ISBN 0 8137 2284 5; 342 pp; softbound. Price: £45.00
248
Processes controlling the development of a river mouth spit
249
Processes controlling the distribution and cycling of manganese in the oxygen minimum zone of the Arabian Sea
250
Processes controlling the distribution and natural attenuation of dissolved phenolic compounds in a deep sandstone aquifer
251
Processes controlling the distribution of aerosol particles in the summer arctic marine boundary layer-an overview of the results from the arctic ocean expedition, 1996 (AOE-96)
252
Processes controlling the episodic streamwater transport of atrazine and other agrichemicals in an agricultural watershed
253
Processes controlling the formation of the Mertz Drift, George Vth continental shelf, East Antarctica: evidence from 3.5 kHz sub-bottom profiling and sediment cores
254
Processes controlling the geochemical composition of the South China Sea sediments during the last climatic cycle
255
Processes controlling the methanesulfonate to non-sea-salt sulfate ratio in the marine environment
256
Processes controlling the physico-chemical micro-environments associated with Pompeii worms
257
Processes controlling the position of frontal systems in Shark Bay, Western Australia
258
Processes controlling the production of aromatic water-soluble organic matter during litter decomposition
259
Processes controlling the production of aromatic water-soluble organic matter during litter decomposition
260
Processes controlling the redox budget for the oxic/anoxic water column of the Black Sea
261
Processes controlling the retention and release of manganese in the organic-rich catchment of Loch Bradan, SW Scotland
262
Processes controlling the shape of ash particles: Results of statistical IPA
263
Processes controlling the shrinkage of porphyroclasts in gabbroic shear zones
264
Processes controlling the stable isotope compositions of Li, B, Mg and Ca in plants, soils and waters: A review
265
Processes controlling trace element geochemistry of Arabian Sea sediments during the last 25,000 years
266
Processes controlling transpiration in the rainforests of north Queensland, Australia
267
Processes controlling vertical coupling and decoupling between the upper and lower crust of orogens: results from Fiordland, New Zealand
268
Processes controlling δ7Li in rivers illuminated by study of streams and groundwaters draining basalts
269
Processes dominating macro-fabric generation in periglacial colluvium
270
Processes driving sea ice variability in the Bering Sea in an eddying ocean/sea ice model: Mean seasonal cycle
271
Processes driving soil solution chemistry in a flooded rice-cropped vertisol: analysis of long-time monitoring data
272
Processes driving temporal dynamics in the nested pattern of waterbird communities
273
Processes driving the episodic flux of faecal indicator organisms in streams impacting on recreational and shellfish harvesting waters
274
Processes driving the networked economy
275
Processes driving the short-term variability of polycyclic aromatic hydrocarbons in the Baltimore and northern Chesapeake Bay atmosphere, USA
276
Processes during anodic stripping voltammetry determination of lead in the presence of copper on a solid electrode modified with 2,2′-bipyridyl in polyaniline Original Research Article
277
PROCESSES FOR ADVANCED TREATMENT OF WATER
278
PROCESSES FOR ADVANCED TREATMENT OF WATER
279
Processes for the production of ultra-pure metals from oxide and their cold rolling to ultra-thin foils for use as targets and as reference materials
280
Processes for the production of ultra-pure metals from oxide and their cold rolling to ultra-thin foils for use as targets and as reference materials
281
PROCESSES FOR THE REMOVAL OF HUMIC SUBSTANCES FROM WATER AN OVERVIEW BASED ON NORWEGIAN EXPERIENCES
282
PROCESSES FOR THE REMOVAL OF HUMIC SUBSTANCES FROM WATER AN OVERVIEW BASED ON NORWEGIAN EXPERIENCES
283
Processes forming and sustaining Saturn’s proton radiation belts
284
Processes Governing Flow and Chemical Characteristics of Discharges from Free-Draining, Underground Coal Mines
285
Processes governing the carbon chemistry during the SAGE experiment
286
Processes governing the flow redistribution in sharp river bends
287
Processes impacting on benzene removal in vertical-flow constructed wetlands
288
Processes improving the dispersibility of spray-dried zein nanoparticles using sodium caseinate
289
Processes in atherogenesis: complement activation
290
Processes in condensed inert gases involving excess electrons
291
Processes in continental collision zones: Preface
292
Processes in Group Cognitive and Behavioral Treatment for Hoarding Original Research Article
293
Processes in low-energy ion-surface collisions: preferential sputtering, defect and adatom formation
294
Processes in microbial transport in the natural subsurface
295
Processes in oxide systems under ultrasonic treatment at high temperatures
296
Processes in PM steel compacts during the initial stages of sintering
297
Processes in silicon deposition by hot-wire chemical vapor deposition
298
Processes in the benthic boundary layer at continental margins and their implication for the benthic carbon cycle
299
Processes in the benthic boundary layer at the Iberian continental margin and their implication for carbon mineralization
300
Processes influencing dissolved iron distributions below the surface at the Atlantic Ocean–Celtic Sea shelf edge
301
Processes influencing distributions and concentrations of Cd, Cu, Mn and Ni at the North West European shelf break
302
Processes Influencing Mercury Speciation and Bioconcentration in the North Inlet-Winyah Bay Estuary, South Carolina, USA
303
Processes influencing surface interaction and photocatalytic destruction of microcystins on titanium dioxide photocatalysts
304
Processes influencing suspended sediment movement on the Malin–Hebrides shelf
305
Processes influencing the chemical composition of the O-horizon of podzols along a 500-km north–south profile from the coast of the Barents Sea to the Arctic Circle
306
Processes influencing the circulation and bottom mixing across the shelf slope: the importance of the slope topography and the coast
307
Processes influencing wind-induced current profiles in near coastal stratified regions
308
Processes Integration: Multiplant Complex vs Multipurpose Plant Assessment
309
Processes Involved in Adult Ego Development: A Conceptual Framework
310
Processes involved in charging of discharged lead-acid battery electrodes by pulse methods: I. Qualitative analysis for flat negative electrodes
311
Processes Involved in Chinese and English Writing: A Study of Chinese University Students
312
Processes involved in sweeping under inhomogeneous electric field conditions as sample enrichment procedure in micellar electrokinetic chromatography
313
Processes involved in the origin and accumulation of hydrocarbon gases in the Yuanba gas field, Sichuan Basin, southwest China
314
Processes involving gases in valve-regulated lead/acid batteries
315
Processes involving heat transfer from a humid air stream to a vertical plate, with simultaneous deposition of frost, are of great importance in a variety of refrigeration equipment. In this work, frost growth on a vertical plate in free convection has be
316
Processes leading to N2O emissions in grassland soil during freezing and thawing
317
Processes leading to N2O emissions in grassland soil during freezing and thawing
318
Processes leading to the coexistence of a host and its parasitoid in homogeneous environments: The role of an infected dormant stage
319
Processes leading to the coexistence of a host and its parasitoid in homogeneous environments: The role of an infected dormant stage
320
Processes Modulating Calcium Distribution in Citrus Leaves. An Investigation Using X-Ray Microanalysis with Strontium as a Tracer
321
Processes occurring during deactivation and regeneration of metal and metal oxide catalysts
322
Processes of alienation: Marx, Orff and Kodaly
323
Processes of attenuation of dissolved arsenic downstream from historic gold mine sites, New Zealand
324
Processes of carbonate precipitation in modern microbial mats
325
Processes of care in cervical and breast cancer screening and follow-up—the importance of communication
326
Processes of change in brain and cognitive development
327
Processes of changing gambling behavior
328
Processes of coastal bluff erosion in weakly lithified sands, Pacifica, California, USA
329
Processes of coastal upwelling and carbon flux in the Cariaco Basin
330
Processes of decay of Rydberg plasma
331
Processes of decision making and end-of-life care for patients with dementia in group homes in Japan
332
Processes of decision-making in small learning groups
333
Processes of dehydration and rehydration of raffinose pentahydrate investigated by thermal analysis and FT-IR/DSC microscopic system
334
Processes of democratization in the East Central European and Balkan states: sovereignty-related conflicts in the context of Europeanization
335
Processes of desertification by goats overgrazing in the Tamaulipan thornscrub (matorral) in north-eastern Mexico
336
Processes of forest products and production costs in Guilan forests, Iran
337
Processes of island colonization by Oligo–Miocene land mammals in the central Mediterranean: New data from Scontrone (Abruzzo, Central Italy) and Gargano (Apulia, Southern Italy)
338
Processes of long-term relaxation of stratospheric aerosol layer in Northern Hemisphere midlatitudes after a powerful volcanic eruption
339
Processes of mantle enrichment and magmatic differentiation in the eastern Snake River Plain: Th isotope evidence
340
Processes of microstructural evolution during superplastic deformation
341
Processes of normal fault evolution in a siliciclastic sequence: a case study from Miri, Sarawak, Malaysia
342
Processes of organic carbon in mangrove ecosystems
343
Processes of oxidation and HCl-leaching of Tellnes ilmenite
344
Processes of physical change to the seabed and bivalve recruitment over a 10-year period following experimental hydraulic clam dredging on Banquereau, Scotian Shelf
345
Processes of Staff Onboarding in the Supply Chain Management of Industrial Enterprises: A Comparison of Best Practices and Literature
346
Processes of taking a gap-filling test: comparison of skilled and less skilled EFL readers
347
Processes of task-set reconfiguration: switching operations and implementation operations
348
Processes of the excitation energy migration and transfer in Ce3+-doped alkali gadolinium phosphates studied with time-resolved photoluminescence spectroscopy technique
349
Processes of Transition in Education Systems: Elizabeth McLeish and David Phillips (Eds.); Symposium Books, Wallingford, Oxfordshire, United Kingdom, 1998, pp. 102, Price $38.00 paperback.
350
Processes of vapor phase growth of AIIBVI single crystals and structures based there upon
351
Processes of Vertical Exchange in Shelf Seas (PROVESS)
352
Processes regulating cellular metal accumulation and physiological effects: Phytoplankton as model systems
353
Processes regulating oxygen and carbon dioxide in surface waters west of the Antarctic Peninsula
354
Processes regulating pCO2 in the surface waters of the central eastern Gotland Sea: a model study*
355
Processes regulating watershed chemical export during snowmelt, Fraser Experimental Forest, Colorado
356
Processes relating aerosol number, aerosol volume and non-seasalt sulfate concentrations in the clean and polluted marine boundary layer
357
Processes reshaping the Nile delta promontories of Egypt: pre- and post-protection
358
Processes responsible for the development of a pit and mound microrelief
359
Processes responsible for the formation and maintenance of sub-surface chlorophyll maxima in the Gulf of Finland
360
Processes responsible for the nitrous oxide emission from a Costa Rican Andosol under a coffee agroforestry plantation
361
Processes taking place in the paste of lead-acid battery plates during soaking prior to formation and their influence on battery performance
362
Processes that contribute to resilience among youth in foster care
363
Processes underlying adaptation to tempo changes in sensorimotor synchronization
364
Processes underlying sex differences in route-learning strategies in children and adolescents
365
Processes used bynurses to make decisions in the clinical practice setting
366
Processes with a t-channel singularity in the physical region: finite beam sizes make cross sections finite Original Research Article
367
Processes with nearly-sequential routings: a comparative analysis
368
Processes, barriers, and outcomes described by ergonomics consultants in preventing work-related musculoskeletal disorders
369
Processes, dynamics and modelling of radiocaesium cycling in a chronosequence of Chernobyl-contaminated Scots pine (Pinus sylvestris L.) plantations
370
Processes, procedures and journal development: Past, present and future
371
Process-form interactions in unstable sand-bed river channels: A numerical modeling approach
372
Processible conducting nanoscale cylinders due to self-organized polyaniline supramolecules
373
Processible conjugated polymers: from organic semiconductors to organic metals and superconductors
374
Processible polyacid doped polyaniline composites: Application for charge storage devices
375
Processible polyaniline complexes due to molecular recognition: Supramolecular structures based on hydrogen bonding and phenyl stacking
376
Process-induced defects and potential distribution in nearly ideal Au/Si Schottky barriers
377
Process-induced deformation of composite T-stiffener structures
378
Process-induced microstructural characteristics of laser consolidated IN-738 superalloy
379
Process-induced modification to the surface of crystalline GaAs measured by photometry
380
Process-induced phase transformation of carbamazepine dihydrate to its polymorphic anhydrates
381
Processing a detergent powder formulation: Direct compression, and high shear wet granulation followed by compression
382
Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength
383
Processing A Language without Inflections: A Reaction Time Study of Sentence Interpretation in Chinese
384
Processing a multifold ground penetration radar data using common-diffraction-surface stack method
385
Processing a multimedia join through the method of nearest neighbor search
386
Processing a rare earth mineral deposit using gravity and magnetic separation
387
Processing a spodumene ore to obtain lithium concentrates for addition to glass and ceramic bodies
388
Processing algorithm for a strapdown gyrocompass
389
Processing Ambiguous Words in Context
390
Processing an ultramafic ore using fiber disintegration by acid attack
391
Processing anaerobic sludge for extended storage as anaerobic digester inoculum
392
Processing analysis of the ternary LiNH2–MgH2–LiBH4 system for hydrogen storage
393
Processing and alloying effects on tensile and impact properties of FeAl alloys
394
Processing and alloying effects on tensile and impact properties of FeAl alloys
395
Processing and Analysis of Clinical-laboratory Features in the Therapy of Lupus Nephritis
396
Processing and analysis of electroencephalography signal to evaluate the effect of sport advertisement on customers
397
Processing and analysis of high temperature geothermal acoustic borehole image logs in the Taupo Volcanic Zone, New Zealand
398
Processing and assessment of high-performance poly(butylene terephthalate) nanocomposites reinforced with microwave exfoliated graphite oxide nanosheets
399
Processing and assessment of poly(butylene terephthalate) nanocomposites reinforced with oxidized single wall carbon nanotubes
400
Processing and ballistic performance of lightweight armors based on ultra-fine-grain aluminum composites
401
Processing and behavior of nanostructured metallic alloys and composites by cryomilling
402
Processing and biocompatibility evaluation of laser processed porous titanium
403
Processing and characterisation of a fine nickel oxide/zirconia/composite prepared by polymeric complex solution synthesis
404
Processing and characterisation of low cost Balistid fish Sufflamen capistratus liver oil for edible purpose
405
Processing and characterisation of model optomechanical composites in the system sapphire fibre/borosilicate glass matrix
406
Processing and characterisation of plasma sprayed zirconia–alumina–mullite composite coating on a mild-steel substrate
407
Processing and characterisation of three-layer alumina-based composites with enhanced damage tolerance
408
Processing and characterization of 3D woven and braided thermoplastic composites
409
Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering
410
Processing and characterization of a hipped oxide dispersion strengthened austenitic steel
411
Processing and characterization of a novel nonporous poly(vinilidene fluoride) films in the β phase
412
Processing and characterization of a position sensitive lateral-effect metal oxide semiconductor detector
413
Processing and characterization of a position sensitive lateral-effect metal oxide semiconductor detector
414
Processing and characterization of a W–2Y material for fusion power reactors
415
Processing and Characterization of AA2024/Al2O3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique
416
Processing and characterization of activated carbon coated magnetic particles for biomedical applications
417
Processing and characterization of Al–Cu–Li alloy AA2195 undergoing scale up production through the vacuum induction melting technique
418
Processing and characterization of alumina wire by controlled fracture forming process: (II) Resintering behavior and mechanical properties
419
Processing and characterization of alumina wire by controlled fracture forming process: (II) Resintering behavior and mechanical properties
420
Processing and characterization of alumina wire by controlled fracture forming process:: (I) Forming behavior and evolution of green microstructure
421
Processing and characterization of alumina wire by controlled fracture forming process:: (I) Forming behavior and evolution of green microstructure
422
Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration
423
Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration
424
Processing and characterization of an Al2O3/WC/TiC micro- nano-composite ceramic tool material
425
Processing and characterization of an hybrid fiber reinforced Ni aluminide
426
Processing and characterization of an hybrid fiber reinforced Ni aluminide
427
Processing and characterization of B4C–SiC–Si–TiB2 composites
428
Processing and characterization of bioglass reinforced hydroxyapatite composites
429
Processing and characterization of calcined kaolin cement powder
430
Processing and characterization of carob powder
431
Processing and characterization of cluster diamond dispersed Al–Si–Cu–Mg composite
432
Processing and characterization of coconut shell powder filled UHMWPE
433
Processing and characterization of coconut shell powder filled UHMWPE
434
Processing and characterization of combustion synthesized YAG powders
435
Processing and characterization of CYSZ/Al2O3 and CYSZ/Al2O3 + YSZ multilayered thermal barrier coatings
436
Processing and characterization of diffusion-bonded Al–Si interfaces
437
Processing and characterization of edgeless radiation detectors for large area detection
438
Processing and characterization of edgeless radiation detectors for large area detection
439
Processing and characterization of electrospun poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) nanofibrous membranes
440
Processing and characterization of electrospun Y2O3-stabilized ZrO2 (YSZ) and Gd2O3-doped CeO2 (GDC) nanofibers
441
Processing and characterization of epoxy nanocomposites reinforced by cup-stacked carbon nanotubes
442
Processing and characterization of epoxy resin dispersed with multi walled carbon nanotube (MWNT) derived from camphor
443
Processing and characterization of ferroelectric thin films obtained by pulsed laser deposition
444
Processing and characterization of fine-grained monolithic SiC ceramic synthesized by spark plasma sintering
445
Processing and characterization of graded metal/intermetallic materials: The example of Fe/FeAl intermetallics
446
Processing and characterization of high-density zirconia–carbon nanotube composites
447
Processing and Characterization of Hybrid Metal Matrix Composites
448
Processing and characterization of La0.5Sr0.5FeO3-supported Sr1−xFe(Al)O3–SrAl2O4 composite membranes
449
Processing and characterization of LDPE/starch/PCL blends
450
PROCESSING AND CHARACTERIZATION OF LEAD ZIRCONATE (PbZrO3) VIA MIX-OXIDE SINTERING ROUTE
451
Processing and characterization of metal–ceramics functionally gradient materials
452
Processing and Characterization of Nanocrystalline Mica Glass-Ceramics
453
Processing and characterization of nanocrystalline molybdenum disilicide consolidated by hot isostatic pressing (HIP
454
Processing and characterization of nano-magnetic Co0.5Ni0.5Fe2O4 system
455
Processing and characterization of nanostructured Cu-carbon nanotube composites
456
Processing and characterization of natural cellulose fibers/thermoset polymer composites
457
Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone a
458
Processing and characterization of new oxysulfide glasses in the Ge–Ga–As–S–O system
459
Processing and characterization of new oxy-sulfo-telluride glasses in the Ge–Sb–Te–S–O system
460
Processing and characterization of new passive and active oxysulfide glasses in the Ge–Ga–Sb–S–O system
461
Processing and characterization of particles reinforced Sisingle bondOsingle bondC composites via pyrolysis of polysiloxane with SiC or/and Al fillers
462
Processing and characterization of Pb(Zr,Ti)O3 thick films on platinum-coated silicon substrate derived from sol–gel deposition
463
Processing and characterization of PbS nanocrystallites in TMOS silica xerogels
464
Processing and characterization of polyethylene/Brazilian clay nanocomposites
465
Processing and characterization of porous Ti2AlC with controlled porosity and pore size Original Research Article
466
Processing and characterization of porous titanium for implants by using NaCl as space holder
467
Processing and characterization of powdered silk micro- and nanofibers by ultrasonication
468
Processing and characterization of PZFNT and PZFNT/PET thin films for pyroelectric applications
469
Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibers from Egyptian agro-industrial residues
470
Processing and characterization of SiB0.5C1.5N0.5 produced by mechanical alloying and subsequent spark plasma sintering
471
Processing and characterization of sol–gel fabricated mixed metal aluminates
472
Processing and characterization of sol–gel titania membranes
473
Processing and characterization of solid and microcellular PHBV/coir fiber composites
474
Processing and characterization of Sr2−xVMoO6−δ double perovskites
475
Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch)
476
Processing and characterization of syntactic carbon foams containing hollow carbon microspheres Original Research Article
477
Processing and characterization of textured mullite ceramics from phyllosilicates
478
Processing and characterization of three-dimensional carbon fiber-reinforced Si–O–C composites via precursor pyrolysis
479
Processing and characterization of TiO2/ZnAl2O4 ultrafiltration membranes deposited on tubular support prepared from Moroccan clay
480
Processing and characterization of transparent TeO2–Bi2O3–ZnO glass ceramics
481
Processing and characterization of ultra-thin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC
482
Processing and characterization of YBCO grain boundaries obtained by the liquid phase removal method
483
Processing and characterization of YBCO grain boundaries obtained by the liquid phase removal method
484
Processing and characterization of ZrC-reinforced steel-based composites
485
Processing and compressive creep of cast replicated IN792 Ni-base superalloy foams
486
Processing and compressive properties of aerogel/epoxy composites
487
Processing and compressive strength of Al–Li–SiCp composites fabricated by a compound billet technique
488
Processing and delivery of peptides presented by MHC class I molecules
489
Processing and dielectric characterization of Ba0.3Sr0.7TiO3 thin films on alumina substrates
490
Processing and dielectric properties of (Pb,Bi)(Mg,Nb,Ti)O3 ceramics
491
Processing and dielectric properties of Bi4Srn−3TinO3n+3 (n = 3, 4 and 5) ceramics obtained from mechanochemically activated precursors
492
Processing and dielectric properties of Bi-doped Sr(Ti0.95Zr0.05)O3 ceramics
493
Processing and dielectric properties of the mixed-layer bismuth titanate niobate Bi7Ti4NbO21 by the metal-organic precursor synthesis method
494
Processing and dimensional changes of cement based composites reinforced with surface-treated cellulose fibres
495
Processing and dry sliding wear performance of spray deposited hyper-eutectic aluminum–silicon alloys
496
Processing and electrical characterization of a unidirectional CFRP composite filled with double walled carbon nanotubes
497
Processing and electrical properties of carbon nanotube/vinyl ester nanocomposites
498
Processing and electrical properties of doped-LaGaO3 by gelcasting
499
Processing and electrical properties of NASICON prepared from yttria-doped zirconia precursors
500
Processing and encapsulation of silver patterns by using reactive ion etch and ammonia anneal
501
Processing and engineering of pervaporation dehydration of ethylene glycol via dual-layer polybenzimidazole (PBI)/polyetherimide (PEI) membranes
502
Processing and fabrication of mixed uranium/refractory metal carbide fuels with liquid-phase sintering
503
Processing and ferroelectric behavior of textured KSr2Nb5O15 ceramics
504
Processing and first characterization of detectors made with high resistivity n- and p-type Czochralski silicon
505
Processing and first characterization of detectors made with high resistivity n- and p-type Czochralski silicon
506
Processing and flexural properties of 3D, seven-directional braided (SiO2)f/SiO2 composites prepared by silica sol-infiltration-sintering method
507
Processing and formulation effects on rheological behavior of barley β-glucan aqueous dispersions
508
Processing and formulation of drug nanoparticles by ternary cogrinding with methacrylic copolymer and sucrose fatty acid esters
509
Processing and fracture behavior of a polyethylene-based thermoplastic adhesive and a glass-fiber filled epoxy adhesive
510
Processing and fracture behavior of a polyethylene-based thermoplastic adhesive and a glass-fiber filled epoxy adhesive
511
Processing and high strain rate impact response of multi-functional sandwich composites
512
Processing and high temperature deformation of Al2O3 fiber-reinforced NiAlFe matrix composites
513
Processing and high temperature deformation of Al2O3 fiber-reinforced NiAlFe matrix composites
514
Processing and hygrothermal effects on viscoelastic behavior of glass fiber/epoxy composites
515
Processing and immobilization of chondroitin-4-sulphate by UV laser radiation
516
Processing and impact behavior of Al/SiCp composites fabricated by the pressureless melt infiltration method
517
Processing and in vivo evaluation of multiphasic calcium phosphate cements with dual tricalcium phosphate phases
518
Processing and interface stability of SiC fiber reinforced Ti–15V–3Cr matrix composites
519
Processing and interfacial bonding strength of 2014 Al matrix composites reinforced with oxidized SiC particles
520
Processing and interpretation of 3D seismic data of an oil field in central of Iraq using AVO techniques
521
Processing And Interpretation Of Electromagnetic Induction Array Data
522
Processing and kinetics studies on the alumina enrichment of coal fly ash by fractionating silicon dioxide as nano particles
523
Processing and magnetic properties of metal-containing SiCN ceramic micro- and nano-composites
524
Processing and mechanical behavior at elevated temperatures of directionally solidified proton conducting perovskites
525
Processing and Mechanical Behavior of Al2O3/ZrO2 Nanocomposites
526
Processing and mechanical behavior of laminated titanium–titanium tri-aluminide (Ti–Al3Ti) composites
527
Processing and mechanical behavior of Zn–Al–Cu porous alloys
528
Processing and mechanical behaviour of TiAl/NiAl intermetallic composites produced by cryogenic mechanical alloying
529
Processing and mechanical behaviour of TiAl/NiAl intermetallic composites produced by cryogenic mechanical alloying
530
Processing and mechanical properties evaluation of glass fiber-reinforced PTFE laminates
531
Processing and mechanical properties of a molybdenum silicide with the composition Mo–12Si–8.5B (at.%)
532
Processing and mechanical properties of a porous low carbon steel with a controlled porous structure by imposition of a static magnetic field
533
Processing and mechanical properties of a porous low carbon steel with a controlled porous structure by imposition of a static magnetic field
534
Processing and mechanical properties of Al2O3–5 vol.% Cr nanocomposites
535
Processing and mechanical properties of AlB2 flake reinforced Al-alloy composites
536
Processing and mechanical properties of AlB2 flake reinforced Al-alloy composites
537
Processing and mechanical properties of bulk nanostructured nickel-based alloys
538
Processing and mechanical properties of carbon nanotube–alumina hybrid reinforced high density polyethylene composites
539
Processing and mechanical properties of HA/UHMWPE nanocomposites
540
Processing and mechanical properties of hydroxyapatite pieces obtained by the gelcasting method
541
Processing and mechanical properties of hydroxyapatite reinforced with hydroxyapatite whiskers
542
Processing and mechanical properties of iron aluminide composites containing oxide particles
543
Processing and mechanical properties of iron aluminide composites containing oxide particles
544
Processing and mechanical properties of materials in the Hf–N system
545
Processing and mechanical properties of nanocrystalline 5083 al alloy
546
Processing and mechanical properties of porous Fe–26Cr–1Mo for solid oxide fuel cell interconnects Original Research Article
547
Processing and mechanical properties of short carbon fibers toughened zirconium diboride-based ceramics
548
Processing and mechanical properties of short fibers/Si3N4p reinforced BaO·Al2O3·2SiO2 ceramic matrix composites
549
Processing and mechanical properties of Si3N4 composites employing polymer-derived SiAlOC as sintering aid
550
Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process
551
Processing and mechanical properties of textured mullite/zirconia composites
552
Processing and mechanical properties of Ti–6Al–4V/TiC in situ composite fabricated by gas–solid reaction
553
Processing and mechanical properties of Ti–6Al–4V/TiC in situ composite fabricated by gas–solid reaction
554
Processing and mechanical properties of ZrO2–TiB2 composites
555
Processing and mechanical response of highly textured Al2O3
556
Processing and microhardness of bulk Cu-Fe nanocomposites
557
Processing and microstructural study of surface laser remelted Al2O3–YSZ–YAG eutectic plates
558
Processing and microstructure characterization of ceria-doped yttria-stabilized zirconia powder and ceramics
559
Processing and microstructure characterization of porous corundum–spinel ceramics prepared by in situ decomposition pore-forming technique
560
Processing and microstructure control of (α2+B2+O) alloy sheet in Ti–Al–Nb system
561
Processing and microstructure of functionally graded W/Cu composites fabricated by multi-billet extrusion using mechanically alloyed powders
562
Processing and microstructure of metal matrix composites prepared by pressureless Ti-activated infiltration using Fe-base and Ni-base alloys
563
Processing and microstructure of metal matrix composites prepared by pressureless Ti-activated infiltration using Fe-base and Ni-base alloys
564
Processing and microstructure of Nano-Mo/Al2O3 composites from MOCVD and fluidized bed
565
Processing and microstructure of PCL/clay nanocomposites
566
Processing and microstructure of submicron WC–Co particulate reinforced Cu matrix composites prepared by direct laser sintering
567
Processing and microstructure of TiNi SMA strips prepared by cold roll-bonding and annealing of multilayer
568
Processing and microstructure of γ-LiAlO2 ceramics
569
Processing and modeling of conductive thermoplastic/carbon nanotube films for strain sensing
570
Processing and nutritional characteristics of value added ostrich products
571
Processing and nutritive evaluation of broiler litter as livestock feed
572
Processing and operating experience of Ni3Al-based intermetallic alloy IC–221M
573
Processing and operating experience of Ni3Al-based intermetallic alloy IC–221M
574
Processing and oxygen permeability of asymmetric ferrite-based ceramic membranes
575
Processing and oxygen permeation studies of asymmetric multilayer Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes
576
Processing and performance of a novel cathode material
577
Processing and performance of bridge deck subcomponents using two schemes of resin infusion
578
Processing and performance of nanophased braided carbon/epoxy composites
579
Processing and performance of Nicalon/Blackglas and Nextel/Blackglas using cure-on-the-fly filament winding and preceramic polymer pyrolysis with inactive fillers
580
Processing and performance of solid oxide fuel cell with Gd-doped ceria electrolyte
581
Processing and phase evolution in low voltage varistor prepared by chemical processing
582
Processing and phase separation of LSMO-based multiferroic composite ceramics
583
Processing and photocatalytic properties of Cu-grafted TiO2 powder from acid treated BaTiO3
584
Processing and photoluminescence properties of surface crystallized ZnO glass-ceramics
585
Processing and physical properties of Al2O3/aluminum alloy composites
586
Processing and piezoelectric properties of porous PZT ceramics
587
Processing and preparation costs for rice and coarse grains in urban Mali: Subjecting an Ipse Dixit to empirical scrutiny
588
Processing and preparation of polymer and organic solar cells
589
Processing and presentation of antigens by dendritic cells: implications for vaccines
590
Processing and presentation of tumor antigens and vaccination strategies
591
Processing and properties of (1 − x)Pb(Mg1/3Nb2/3)O3·xPbTiO3 solid solutions from PbO- and MgO-excess compositions
592
Processing and properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 thick films
593
Processing and properties of 2D-Cf/SiC composites incorporating SiC fillers
594
Processing and properties of a glass-ceramic from coal fly ash from a thermal power plant through an economic process
595
Processing and properties of a mica–apatite glass–ceramic reinforced with Y-PSZ particles
596
Processing and properties of Al2O3 nanocomposites reinforced with sub-micron Ni and NiAl2O4
597
Processing and properties of Al2O3 nanocomposites reinforced with sub-micron Ni and NiAl2O4
598
Processing and properties of Al-based powder suspension/slurry: A comparison study of aqueous binder systems, stability and film uniformity
599
Processing and properties of aligned multi-walled carbon nanotube/aluminoborosilicate glass composites made by sol–gel processing Original Research Article
600
Processing and properties of alumina–carbon nano fibre ceramic composites using standard ceramic technology
601
Processing and properties of an all-oxide composite with a porous matrix
602
Processing and properties of biphasic calcium phosphates bioceramics obtained by pressureless sintering and hot isostatic pressing
603
Processing and properties of bone-analogue biodegradable and bioinert polymeric composites
604
Processing and properties of bone-analogue biodegradable and bioinert polymeric composites
605
Processing and properties of BST thin films for tunable microwave devices
606
Processing and properties of C/Si–B–C–N fiber–reinforced ceramic matrix composites prepared by precursor impregnation and pyrolysis Original Research Article
607
Processing and properties of CaCu3Ti4O12 ceramics Original Research Article
608
Processing and properties of carbon nanotubes reinforced aluminum composites
609
Processing and properties of carbon nanotubes-nano-WC-Co composites
610
Processing and properties of carbon nanotubes-nano-WC-Co composites
611
Processing and properties of carbon nanotubes-nano-WC-Co composites
612
Processing and properties of C–Mn steel with dual-phase microstructure
613
Processing and properties of cobalt-substituted lithium ferrite in the GHz frequency range
614
Processing and properties of copper dispersed alumina matrix nanocomposites
615
Processing and properties of copper-coated carbon fibre reinforced aluminium alloy composites
616
Processing and properties of extruded starch/polymer foams
617
Processing and properties of ferroelectric (Bi, La)4(Ti, Ge)3O12 thin films by chemical solution deposition
618
Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering
619
Processing and properties of gluten/zein composite
620
Processing and properties of large grain (RE)BCO
621
Processing and properties of large grain (RE)BCO
622
Processing and properties of Mg–6Gd–1Zn–0.6Zr: Part 1 – Recrystallisation and texture development
623
Processing and properties of Mg–6Gd–1Zn–0.6Zr: Part 2. Mechanical properties and particle twin interactions
624
Processing and properties of MoSi2–SiC and MoSi2–Al2O3
625
Processing and properties of MoSi2–SiC and MoSi2–Al2O3
626
Processing and properties of MWNT/HDPE composites Original Research Article
627
Processing and Properties of Nanocomposites
628
Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying
629
Processing and properties of nanocrystalline Ni and NiO catalysts
630
Processing and properties of nanophase non-oxide ceramics
631
Processing and properties of nanophase non-oxide ceramics
632
Processing and properties of nanophase SiC/Si3N4 composites
633
Processing and properties of nanoporous hydroxyapatite ceramics
634
PROCESSING AND PROPERTIES OF NOVEL REINFORCED POLYMER BLENDS MADE OF POLYMERS AND LOW-MELTING GLASS
635
Processing and properties of particulate reinforced steel matrix composites
636
Processing and properties of particulate reinforced steel matrix composites
637
Processing and properties of Pb(Mg1/3Nb2/3)O3–PbTiO3-based ceramics
638
Processing and properties of PMMN–PZT quaternary piezoelectric ceramics for ultrasonic motors
639
Processing and properties of poly(methyl methacrylate)/carbon nano fiber composites
640
Processing and properties of poly(methyl methacrylate)/carbon nanofiber composites
641
Processing and properties of polyethylene reinforced by graphene nanosheets and carbon nanotubes
642
Processing and properties of polymer composites containing aligned functionalized carbon nanofibers Original Research Article
643
Processing and properties of polysiloxane-derived porous silicon carbide ceramics using hollow microspheres as templates
644
Processing and properties of porous piezoelectric materials with high hydrostatic figures of merit
645
Processing and properties of porous poly( -lactide)/bioactive glass composites
646
Processing and properties of porous titanium using space holder technique
647
Processing and properties of pressable ceramic with non-uniform reinforcement for selective-toughening
648
Processing and properties of SiC particulate reinforced Al6.2Zn2.5Mg1.7Cu alloy (7010) matrix composites prepared by mechanical alloying
649
Processing and properties of SiC particulate reinforced Al6.2Zn2.5Mg1.7Cu alloy (7010) matrix composites prepared by mechanical alloying
650
Processing and properties of silicon carbide and its composites containing MoSi2 and ZrB2
651
Processing and properties of sintered reaction-bonded silicon nitride with Y2O3–MgSiN2: Effects of Si powder and Li2O addition Original Research Article
652
Processing and properties of sol gel derived alumina–carbon nano tube composites
653
Processing and properties of the ceramic conductive multilayer device solid oxide fuel cell (SOFC)
654
Processing and properties of titanium–titanium boride (TiBw) matrix composites—a review
655
Processing and properties of transparent hydroxyapatite and β tricalcium phosphate obtained by HIP process
656
Processing and properties of ultrafine-grain aluminium alloy 6111 sheet
657
Processing and properties of ultrafine-grain aluminum alloy 5005 sheet
658
Processing and properties of ultra-high temperature ceramics for space applications
659
Processing and properties of ultrahigh-carbon (1.6%C) steel
660
Processing and properties of unidirectional SiO2f/SiO2 composites
661
Processing and properties of vanadium doped strontium niobate
662
Processing and properties of zirconium diboride-based composites
663
Processing and quality characteristics of apple slices processed under simultaneous infrared dry-blanching and dehydration with intermittent heating Original Research Article
664
Processing and quality characteristics of apple slices under simultaneous infrared dry-blanching and dehydration with continuous heating Original Research Article
665
Processing and recall of seductive details in scientific text
666
Processing and recombination lifetime characterization of silicon microstrip detectors
667
Processing and recombination lifetime characterization of silicon microstrip detectors
668
Processing and reliability of CSPs with underfill
669
Processing and routage of HIV glycoproteins by furin to the cell surface
670
Processing and sensory characteristics of cooked roast beef: effect of breed, age, gender and storage conditions
671
Processing and size effects on the optical properties of sputtered oxide thin films
672
Processing and Spark Plasma Sintering of zirconia/titanium cermets
673
Processing and storage of lye-treated carrots fermented by a mixed starter culture
674
Processing and structural evolution of nanocrystalline CuCeO2−x catalysts
675
Processing and structural evolution of nanocrystalline CuCeO2−x catalysts
676
Processing and structural properties of random oriented lead lanthanum zirconate titanate thin films
677
Processing and structures of bi-phase oxide ceramic filaments
678
Processing and study of dielectric and ferroelectric nature of BiFeO3 modified SrBi2Nb2O9
679
Processing and subcellular localization of ADAM2 in the Macaca fascicularis testis and sperm
680
Processing and tensile properties of hydroxyapatite-whisker-reinforced polyetheretherketone
681
Processing and thermal properties of an Mo5Si3C–SiC ceramic
682
Processing and thermal, mechanical and morphological characterization of post-consumer polyolefins/thermoplastic starch blends
683
Processing and transplanting cord-blood cells
684
Processing and Transport of the Precursor of Cathepsin C during Its Transfer into Lysosomes
685
Processing and Transport of the Precursor of Cathepsin C during Its Transfer into Lysosomes
686
Processing and ultraviolet patterning of LiNbO3 epitaxial films from metallorganic precursors
687
Processing and ultraviolet patterning of LiNbO3 epitaxial films from metallorganic precursors
688
Processing and visualization for diffusion tensor MRI
689
Processing assays of size fractions from sieve and cyclosizer analyses
690
Processing behavior of nanocrystalline NiAl during milling, sintering and mechanical loading and interpretation of its intergranular fracture
691
Processing bias in anxious subjects andrepressors,measured by emotional Stroop interferenceandattentional allocation
692
Processing biological gender and number information during Chinese pronoun resolution: ERP evidence for functional differentiation
693
Processing biomass in conventional oil refineries: Production of high quality diesel by hydrotreating vegetable oils in heavy vacuum oil mixtures Original Research Article
694
Processing biomass-derived oxygenates in the oil refinery: Catalytic cracking (FCC) reaction pathways and role of catalyst
695
Processing blackcurrants dramatically reduces the content and does not enhance the urinary yield of anthocyanins in human subjects
696
Processing by both classical and mechanosynthesis routes and characterization of a new solid solution of tungsten–bronze structure ceramics
697
Processing by equal-channel angular pressing: Applications to grain boundary engineering
698
Processing by mechanosynthesis and properties of piezoelectric Pb(Mg1/3Nb2/3)O3–PbTiO3 with different compositions
699
Processing by mechanosynthesis and properties of piezoelectric Pb(Mg1/3Nb2/3)O3–PbTiO3 with different compositions Original Research Article
700
Processing by tape casting and mechanical behaviour of aluminous cement-based matrix alumina fibers composites
701
Processing Camera-Based Documents Advances in Document Engineering
702
Processing Capability of Apatite-Mullite Glass-Ceramic Materials for the Production of Dental Restorations
703
Processing Capability of Apatite-Mullite Glass-Ceramic Materials for the Production of Dental Restorations
704
Processing centres in artisanal gold mining
705
Processing cereal straws by steam explosion in a pilot plant to enhance digestibility in ruminants
706
Processing Challenges and Opportunities of Camel Dairy Products
707
Processing characteristic and radiation resistance of various epoxy insulation materials for superconducting magnets
708
Processing characteristics and parameters in capacitor discharge sintering
709
Processing characteristics and thermal stabilities of gel and sol of epoxidized natural rubber
710
Processing characteristics of beef roasts made from high and normal pH bull inside rounds
711
Processing cherries (Prunus avium) using supercritical fluid technology. Part 1: Recovery of extract fractions rich in bioactive compounds
712
Processing cherries (Prunus avium) using supercritical fluid technology. Part 2. Evaluation of SCF extracts as promising natural chemotherapeutical agents
713
Processing companiesʹ preferences for attributes of beef in Switzerland
714
Processing condition influence on the characteristics of gold nanoparticles produced by pulsed laser ablation in liquids
715
Processing conditions analysis of Eucalyptus globulus plywood bonded with resol-tannin adhesives
716
Processing conditions and microstructural features of porous 316L stainless steel components by DMLS
717
Processing conditions, microstructure and mechanical properties of hetero-nanostructured ODS FeAl alloys produced by spark plasma sintering
718
Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys
719
Processing considerations with plasma immersion ion implantation
720
Processing contaminated soils and sediments by high power ultrasound
721
Processing controlled PROs in Spanish
722
Processing Coordinated Structures in Context: The Effect of Topic-Structure on Ambiguity Resolution
723
Processing copper–carbon nanotube composite powders by high energy milling
724
Processing copper–vanadium precipitate formed from crude TiCl4 in titania and titanium sponge production
725
Processing cotton gin trash to enhance in vitro dry matter digestibility in reduced time
726
Processing count queries over event streams at multiple time granularities
727
Processing data from scanning gauges on industrial web processes
728
Processing date kernels for iron (III) and chromium (VI) adsorption from water
729
Processing defects and their relevance to strength in alumina ceramics made by slip casting
730
Processing defects in ceramic powders and powder compacts
731
Processing defects in hot extrusion reaction synthesis
732
Processing defects in hot extrusion reaction synthesis
733
Processing demands upon cognitive, linguistic, and articulatory functions promote grey matter plasticity in the adult multilingual brain: Insights from simultaneous interpreters
734
Processing dependence of surface morphology in condensation cured PDMS nanocomposites
735
Processing dependence of Youngʹs modulus of Ti-base nanostructured alloys
736
Processing dependences of microstructure of ferroelectric thin films
737
Processing dependency of percolation threshold of MWCNTs in a thermoplastic elastomeric block copolymer
738
Processing dependent behavior of soft imprint lithography on the 1-10-nm scale
739
Processing Digital Image for Measurement of Crack Dimensions in Concrete
740
Processing discontinuous lexical items, by whatever name
741
Processing discontinuous lexical items: a reply to Frazier
742
Processing discourse roles in scripted narratives: The influences of context and world knowledge
743
Processing discrete data for deconvolution voltammetry based on the Fourier least-square method Original Research Article
744
Processing distributed mobile queries with interleaved remote mobile joins
745
Processing effect on microstructure and superconducting properties of sintered ReBa2Cu3Oy ceramics — the role of ionic radius
746
Processing effects during rotating membrane emulsification
747
Processing effects in aluminum micro-channel tube for brazed R744 heat exchangers
748
Processing effects on in-flight particle state and functional coating properties of plasma-sprayed manganese zinc ferrite
749
Processing effects on microstructure in Er and ErD2 thin-films
750
Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings
751
Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings
752
Processing effects on the microstructure and ferroelectric properties of Pb(Zr,Ti)O3 thin films prepared by sol–gel process
753
Processing effects on the stability of amorphous indium gallium zinc oxide thin-film transistors
754
Processing effects on the thermo-physical properties of carbon nanotube polyethylene composite
755
Processing elided verb phrases with flawed antecedents: The recycling hypothesis
756
Processing filler-gap dependencies in a head-final language
757
Processing fluency of the forms and sounds of Chinese characters
758
Processing focus structure and implicit prosody during reading: Differential ERP effects
759
Processing for optically active erbium in silicon by film co-deposition and ion-beam mixing
760
Processing games with restricted capacities
761
Processing gamma-based TiAl sheet materials by cyclic cold roll bonding and annealing of elemental titanium and aluminum foils
762
Processing gas chromatographic data and confidence interval calculation for partition coefficients determined by the phase ratio variation method
763
Processing generalized k-nearest neighbor queries on a wireless broadcast stream
764
Processing glass–pyrochlore composites for nuclear waste encapsulation
765
Processing hexane–oil miscella using a nonporous polymeric composite membrane Original Research Article
766
Processing highly tritiated water desorbed from molecular sieve bed using PERMCAT
767
Processing Huge Graphs with Stxxl
768
Processing Hyperion and ALI for forest classification
769
Processing impairments in OCD: It is more than inhibition!
770
Processing in transgenic Arabidopsis thaliana plants of polyproteins with linker peptide variants derived from the Impatiens balsamina antimicrobial polyprotein precursor
771
Processing individual fuzzy attributes for fuzzy rule induction
772
Processing induced morphological development in hydrated sulfonated poly(arylene ether sulfone) copolymer membranes
773
Processing industries: valuable strategy for reducing rice losses
774
Processing inferences at the semantics/pragmatics frontier: Disjunctions and free choice
775
Processing Instruction Revisited in the Iranian EFL Context and the Moderating Role of Grammatical Sensitivity
776
Processing Instruction Revisited: Does it Lead to Superior Performance in Interpretation and Production?
777
Processing interactions between phonology and melody: Vowels sing but consonants speak
778
Processing JPEG-compressed images and documents
779
Processing k-skyband, constrained skyline, and group-by skyline queries on incomplete data
780
Processing Large-Scale Images on Ace16k Using Discrete Wavelet Transform
781
Processing load and the use of concrete representations and strategies for solving linear equations
782
Processing local transitions versus long-distance syntactic hierarchies
783
Processing map and hot working mechanisms in a P/M TiAl alloy composite with in situ carbide and silicide dispersions
784
Processing map and kinetic analysis for hot deformation of an as-cast AZ91D magnesium alloy
785
Processing map approach for surface defect prediction in the hot bar rolling
786
Processing map for hot working characteristics of a wrought 2205 duplex stainless steel
787
Processing map for hot working of Inconel 718 alloy
788
Processing map for hot working of spray formed and hot isostatically pressed Al–Li alloy (UL40)
789
Processing map of Al2O3 particulate reinforced Al alloy matrix composites
790
Processing maps and hot workability of Super304H austenitic heat-resistant stainless steel
791
Processing maps and microstructural evolution of isothermal compressed Al–Cu–Li alloy
792
Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300–950 °C
793
Processing maps and rate controlling mechanisms of hot deformation of electrolytic tough pitch copper in the temperature range 300–950 °C
794
Processing maps for hot deformation of a high-Mn TWIP steel: A comparative study of various criteria based on dynamic materials model
795
Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: Anisotropy of hot workability
796
Processing maps for hot deformation of the extruded 7075 aluminum alloy bar: Anisotropy of hot workability
797
Processing maps for hot working of 47Zr–45Ti–5Al–3V alloy
798
Processing maps for hot working of a P/M iron aluminide alloy
799
Processing maps for hot working of FeAl-based alloy
800
Processing maps for hot working of titanium alloys
801
Processing maps for hot working of titanium alloys
802
Processing maps for hot working of ZK60 magnesium alloy
803
Processing Maps for Use in Hot Working of Ductile Iron Original Research Article
804
Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic models
805
Processing maps, microstructure evolution and deformation mechanisms of extruded AZ31-DMD during hot uniaxial compression
806
Processing materials with microwave energy
807
Processing materials with microwave energy
808
Processing memories of anger-eliciting events: The effect of asking ‘why’ from a distance
809
Processing method dependency of thermoelectric properties of Bi85Sb15 alloys in low temperature Original Research Article
810
Processing Method of Multi-Wavelength Pyrometer Data for Continuous Temperature Measurements
811
Processing Method of Night-Time Cloudiness for Astronomical Site Selection
812
Processing methods to control silk fibroin film biomaterial features
813
Processing microstructure property correlation of porous Ni–YSZ cermets anode for SOFC application
814
Processing microstructure property relationships in severely deformed tantalum
815
Processing mineral raw materials in Siberia: ores of molybdenum, tungsten, lead and gold
816
Processing morphological ambiguity: An experimental investigation of Russian numerical phrases
817
Processing multi-channel alumina membranes by tape casting latex-based suspensions
818
Processing municipal wastewaters by forward osmosis using CTA membrane
819
Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion
820
Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion
821
Processing nanoengineered scaffolds through electrospinning and mineralization suitable for biomimetic bone tissue engineering
822
Processing nanoparticles with A4F-SAXS for toxicological studies: Iron oxide in cell-based assays
823
Processing nanostructured materials: the need to integrate experimental data with multiscale continuum/non-continuum simulations
824
Processing naproxen with supercritical CO2
825
Processing negated sentences with contradictory predicates: Is a door that is not open mentally closed?
826
Processing network models for forest management
827
Processing network models of energy/environment systems
828
Processing networks with planned inventories: Tandem queues with feedback
829
Processing of a coal waste as a measure for savings of resources and power savings on Cherepovets Metallurgical Industrial complex of Open Society "Severstal"
830
Processing of a 22 kDa Precursor Protein to Produce the Circular Protein Tricyclon A
831
Processing of a bulk metallic glass forming alloy based on industrial grade Zr
832
Processing of a ferric anolyte produced by a copper electrowinning cell based on reactive electro dialysis
833
Processing of a low-carbon steel by equal-channel angular pressing Original Research Article
834
Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure
835
Processing of a multilayer bender type actuator
836
Processing of a natural hydroxyapatite powder: From powder optimization to porous bodies development
837
Processing of a new high strength high toughness steel with duplex microstructure (Ferrite + Austenite)
838
Processing of a Zimbabwean petalite to obtain lithium carbonate
839
Processing of AB-type carbonated hydroxyapatite Ca10−x(PO4)6−x(CO3)x(OH)2−x−2y(CO3)y ceramics with controlled composition
840
Processing of acidic proline-rich proprotein by human salivary gland convertase
841
Processing of advanced electroceramic components by fused deposition technique
842
Processing of advanced materials using high-energy mechanical milling
843
Processing of affective pictures modulates right-hemispheric gamma band EEG activity
844
Processing of affective prosody and lexical-semantics in spoken utterances as differentiated by event-related potentials
845
Processing of Affective Stimuli in Alcoholism
846
Processing of AISI M2 high speed steel reinforced with vanadium carbide by solar sintering
847
Processing of Al2O3 sheets by the gel–tape-casting process
848
Processing of Al2O3/SiC nanocomposites—part 1: aqueous colloidal processing
849
Processing of Al2O3/SiC nanocomposites—part 2: green body formation and sintering
850
Processing of Al2O3/Y-TZP laminates from water-based cast tapes
851
Processing of Alborz Markazi coal tailings using column flotation
852
Processing of alumina and zirconia nano-powders and compacts
853
Processing of alumina and zirconia nano-powders and compacts
854
Processing of alumina and zirconia nano-powders and compacts
855
Processing of alumina low-density xerogels by ambient pressure drying
856
Processing of alumina-coated tetragonal zirconia materials and their response to sliding wear
857
Processing of aluminium alloys by equal channel angular drawing at room temperature
858
Processing of aluminium alloys containing titanium addition by mechanical alloying
859
Processing of aluminium alloys containing titanium addition by mechanical alloying
860
Processing of amorphous Fe–W reinforced Fe matrix composites
861
Processing of amorphous Fe–W reinforced Fe matrix composites
862
Processing of an aqueous tape casting of mesocarbon microbeads for high-performance carbonaceous laminations Original Research Article
863
Processing of an ultrafine-grained titanium by high-pressure torsion: An evaluation of the wear properties with and without a TiN coating
864
Processing of arsenic waste by precipitation and solidification
865
Processing of ATG8s, Ubiquitin-Like Proteins, and Their Deconjugation by ATG4s Are Essential for Plant Autophagy
866
Processing of auditory stimuli during visual attention in patients with schizophrenia
867
Processing of autobiographical memory retrieval cues in borderline personality disorder
868
Processing of AZ31 magnesium alloy by a new noble severe plastic deformation method
869
Processing of banded magnetite quartzite (BMQ) ore using flotation techniques
870
Processing of barium titanate tapes with different binders for MLCC applications—Part I: Optimization using design of experiments
871
Processing of barium titanate tapes with different binders for MLCC applications—Part II: Comparison of the properties
872
Processing of barley and enzyme supplementation in diets for young pigs
873
Processing of basic speech acts following localized brain damage: A new light on the neuroanatomy of language
874
Processing of Bi1.5ZnNb1.5O7 ceramics for LTCC applications: Comparison of synthesis and sintering methods
875
Processing of binary images of handwritten text documents
876
Processing of biomorphic porous TiO2 ceramics by chemical vapor infiltration and reaction (CVI-R) technique
877
Processing of biomorphic Si3N4 ceramics by CVI-R technique with SiCl4/H2/N2 system
878
Processing of bitumens modified by a bio-oil-derived polyurethane
879
Processing of black liquors by UF/NF ceramic membranes Original Research Article
880
Processing of boric acid from borax by a wet chemical method
881
Processing of brass open-cell foam by silica-gel beads replication
882
Processing of buffer sheets for sintering of PLZT tapes
883
Processing of bulk nanostructured ceramics
884
Processing of carbide-derived carbon (CDC) using biomorphic porous titanium carbide ceramics
885
Processing of carbon composite paper as electrode for fuel cell
886
Processing of Carbon Disulfide at KRC for Safe Disposal
887
Processing of carbon nanotube reinforced silicon nitride composites by spark plasma sintering
888
Processing of carbon-fiber reinforced (SiC + ZrC) mini-composites by soft-solution approach and their characterization
889
Processing of Carcinoembryonic Antigen by Kupffer Cells: Recognition of a Penta-Peptide Sequence
890
Processing of cassava roots to remove cyanogens
891
Processing of cassava roots to remove cyanogens
892
Processing of cassava waste for improved biomass utilization
893
Processing of catalysts by atomic layer epitaxy: modification of supports
894
Processing of cellulose nanowhiskers/cellulose acetate butyrate nanocomposites using sol–gel process to facilitate dispersion
895
Processing of cellulose synthase (AcsAB) from Gluconacetobacter hansenii 23769
896
Processing of ceramic-metal interpenetrating composites
897
Processing of changes in visual speech in the human auditory cortex
898
Processing of chromium tungsten nitride hard coatings for glass molding
899
Processing of clustered DNA damage in human breast cancer cells MCF-7 with partial DNA-PKcs deficiency
900
Processing of coal fines in a water-only cyclone
901
Processing of coal mine gas with low methane concentrations for use in high-temperature fuel cells Original Research Article
902
Processing of color words activates color representations
903
Processing of commercial purity titanium by ECAP using a 90 degrees die at room temperature
904
Processing of complex sentences in a case of aphasia in Indonesian: thematic vs. linear strategies
905
Processing of complexly shaped multiply connected domains in finite element mesh generation
906
Processing of concretes with a high power CO2 laser
907
Processing of confidential information in distributed systems by fragmentation
908
Processing of continuously reinforced Ti-alloy metal matrix composites (MMC) by magnetron sputtering
909
Processing of continuously reinforced Ti-alloy metal matrix composites (MMC) by magnetron sputtering
910
Processing of copper anodic-slimes for extraction of valuable metals
911
Processing of copper–carbon nanotube composites by vacuum hot pressing technique
912
Processing of cordierite based ceramics from alkaline-earth-aluminosilicate glass, kaolin, alumina and magnesite
913
Processing of Cr2Nb precursor through powder metallurgy route
914
PROCESSING OF CRUDE MINERAL OILS AS EMULSIFABLE CONCENTRATES FORMULATION TO EVALUATE THEIR PHYSICAL PROPERTIES AND PESTICIDAL EFFICIENCY
915
Processing of Cu–Al2O3 metal matrix nanocomposite materials by using high energy ball milling
916
Processing of Cu–Al2O3 metal matrix nanocomposite materials by using high energy ball milling
917
Processing of damage-tolerant, oxidation-resistant ceramic matrix composites by a precursor infiltration and pyrolysis method
918
Processing of damage-tolerant, oxidation-resistant ceramic matrix composites by a precursor infiltration and pyrolysis method
919
PROCESSING OF DATE HONEY
920
Processing of dense bulk MgB2 superconductor via pressure-assisted thermal explosion mode of SHS
921
Processing of dense La0.2Sr0.8Fe0.8Cr0.2O3−δ oxygen membranes
922
Processing of dense nanocrystalline Bi2O3-Y2O3 solid electrolyte
923
Processing of dense nanostructured HAP ceramics by sintering and hot pressing
924
Processing of diamond particle reinforced silicon(Ti) matrix composites by in-situ reactive sintering and their thermal properties
925
Processing of diamond-reinforced bulk metallic glass composites
926
Processing of different alumina–zirconia composites by slip casting
927
Processing of discarded household refrigerators: lessons from the Dutch example
928
Processing of discarded refrigerators in The Netherlands
929
Processing of discarded refrigerators in the Netherlands: some historical, energitical and environmental aspects
930
Processing of dry-cured ham in a reduced-oxygen atmosphere: Effects on physicochemical and microbiological parameters and mite growth
931
Processing of dry-cured ham in a reduced-oxygen atmosphere: Effects on sensory traits
932
Processing of dynamic aspects of speech and non-speech stimuli: a whole-head magnetoencephalography study
933
Processing of Egyptian boiler-ash for extraction of vanadium and nickel
934
Processing of electron microprobe data from the analysis of altered cementitious materials
935
Processing of Emotional Facial Expressions in Korsakoffʹs Syndrome
936
Processing of enriched elemental boron (10B ∼ 65 at. %)
937
Processing of eutectic Zn–5% Al alloy by equal-channel angular pressing
938
Processing of expanded graphite reinforced polymer nanocomposites
939
Processing of Facial Blends of Emotion: Support for Right Hemisphere Cognitive Aging
940
Processing of fine particles using closely spaced inclined channels
941
Processing of Fine-Grained DP300/600 Dual Phase Steel from St12 Structural Steel by the Thermo-Mechanical Processing of Cold Rolling and Intercritical Annealing
942
Processing of fine-grained mechanically alloyed FeAl
943
Processing of fine-grained W materials without detrimental phases and their mechanical properties at 200–432 K
944
Processing of fish offal waste through fermentation utilizing whey as inoculum
945
Processing of floor tiles bearing ornamental rock-cutting waste
946
Processing of fluxing underfills for flip chip-on-laminate assembly
947
Processing of Foturan® glass ceramic substrates for micro-solid oxide fuel cells
948
Processing of Frigate Mackerel Auxis thazard: Post-harvest Gender Roles
949
Processing of functional polymers and organic thin films by the matrix-assisted pulsed laser evaporation (MAPLE) technique
950
Processing of Gasdynamic Numerical Solutions in Similarity Parameters
951
Processing of Gd2O3:Eu phosphor particles through aerosol route
952
Processing of germanium for integrated circuits
953
Processing of glass-ceramics in the SiO2–Al2O3–B2O3–MgO–CaO–Na2O–(P2O5)–F system via sintering and crystallization of glass powder compacts
954
Processing of glasses with engineered stress profiles
955
Processing of graded anode-supported micro-tubular SOFCs based on samaria-doped ceria via gel-casting and spray-coating
956
Processing of HA-coated Ti–6Al–4V by a ceramic slurry approach: an in vitro study
957
Processing of high alumina iron ore slimes using classification and flotation
958
Processing of high hardness-high toughness alumina matrix nanocomposites
959
Processing of high hardness-high toughness alumina matrix nanocomposites
960
Processing of high purity gold from scraps using diethylene glycol di-N-butyl ether (dibutyl carbitol)
961
Processing of High Spectral Resolution Reflectance Data for the Retrieval of Canopy Water Content Information
962
Processing of high-frequency multibeam echo sounder data for seafloor characterization
963
Processing of highly concentrated polyacrylamide-coated silicon carbide suspensions
964
Processing of highly oriented (K,Na)NbO3 thin films using a tailored metal-alkoxide precursor solution
965
Processing of highly oriented LiNbO3 thin films through ametal-organic precursor solution
966
Processing of highly porous TiO2 bone scaffolds with improved compressive strength
967
Processing of high-performance anisotropic permanent magnets by die-upset forging
968
Processing of high-performance anode-supported planar solid oxide fuel cell
969
Processing of high-performance fiber-reinforced cement-based composites
970
Processing of hollow micro- and nanostructures using the hydrophilic nature of MgO
971
Processing of homogeneous ceramic/polymer blends for bioresorbable composites
972
Processing of honey using polymeric microfiltration and ultrafiltration membranes Original Research Article
973
Processing of hot pressed Al2O3–Cr2O3/Cr-carbide nanocomposite prepared by MOCVD in fluidized bed
974
Processing of hydrocarbons in an AC discharge nonthermal plasma reactor: An approach to generate reducing agents for on-board automotive exhaust gas cleaning
975
Processing of hydroxyapatite reinforced ultrahigh molecular weight polyethylene for biomedical applications
976
Processing of hydroxyapatite via microemulsion and emulsion routes
977
Processing of Ikonos imagery for submetre 3D positioning and building extraction
978
Processing of indium: a review
979
Processing of Information Security Risks with Ordered Weighted Averaging Operators
980
Processing of interpenetrating Mg–TiNi composites by spark plasma sintering
981
Processing of intractable polymers using reactive solvents. 6. A new reactive solvent concept based on reversible depolymerisation
982
Processing of invisible social cues
983
Processing of iron aluminides
984
Processing of iron aluminides
985
Processing of iron aluminides by pressureless sintering through Fe+Al elemental route
986
Processing of iron aluminides by pressureless sintering through Fe+Al elemental route
987
Processing of iron-doped titania powders in flame aerosol reactors
988
Processing of Japanese morphogram and syllabogram in the left basal temporal area: electrical cortical stimulation studies
989
Processing of kinetic microarray signals
990
Processing of kinetic microarray signals
991
Processing of laminated hybrid ceramic composites
992
Processing of laser scanner data—algorithms and applications
993
Processing of leather waste: pilot scale studies on chrome shavings. Isolation of potentially valuable protein products and chromium
994
Processing of lexical ambiguity in patients with traumatic brain injury
995
Processing of Lexical Bundles by Persian Speaking Learners of English
996
Processing of LiBH4 from its elements by ball milling method
997
Processing of liposome-encapsulated natural herbs derived from Silybum marianum plants for the treatment of breast cancer cells
998
Processing of locust bean fruits: Challenges and prospects
999
Processing of low grade graphite ores of orissa, India
1000
Processing of low-density alumina foam
