<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Preparation and characterization of a new nano layered material, Co–Zr LDH
2
Preparation and characterization of a new negatively charged polytetrafluoroethylene membrane for treating oilfield wastewater
3
Preparation and characterization of a new organic–inorganic nano-composite poly-o-toluidine Th(IV) phosphate: Its analytical applications as cation-exchanger and in making ion-selective electrode
4
Preparation and Characterization of a New Triclinic Compound Bi3.5V1.2O8.25 to Show the Known Phase Bi4V2O11 to Be Nonexistent as a Single Phase
5
Preparation and characterization of a newly water soluble lignin graft copolymer from oil palm lignocellulosic waste
6
Preparation and characterization of a novel antistatic poly(vinyl chloride)/quaternary ammonium based ion-conductive acrylate copolymer composites
7
Preparation and characterization of a novel bioactive restorative composite based on covalently coupled polyurethane–nanohydroxyapatite fibres
8
Preparation and Characterization of a Novel Biodegradable Epoxy Resin Modified with Epoxidized Oleic Acid
9
Preparation and characterization of a novel bipolar membrane by plasma-induced polymerization
10
Preparation and characterization of a novel chitosan scaffold
11
Preparation and characterization of a novel COL/BC composite for potential tissue engineering scaffolds
12
Preparation and characterization of a novel composite containing carboxymethyl cellulose used for bone repair
13
Preparation and characterization of a novel epoxy based nanocomposite using tryptophan as an eco-friendly curing agent
14
Preparation and characterization of a novel fluorinated acrylate resin
15
Preparation and characterization of a novel fluoro-silicone acrylate copolymer by semi-continuous emulsion polymerization
16
Preparation and characterization of a novel hybrid magnetic semiconductor containing rare, one-dimensional mixed-iodide/chloride anion of lead(II)
17
Preparation and characterization of a novel hydroxyapatite/carbon nanotubes composite and its interaction with osteoblast-like cells
18
Preparation and characterization of a novel hyperbranched polyphosphate ester
19
Preparation and characterization of a novel layer-by-layer porous composite membrane for vanadium redox flow battery (VRB) applications
20
Preparation and characterization of a novel luminescent nanoparticles
21
Preparation and characterization of a novel magnetic biochar for arsenic removal
22
Preparation and characterization of a novel microporous PE membrane supporting composite gel polymer electrolyte
23
Preparation and characterization of a novel monoclonal antibody specific to severe acute respiratory syndrome-coronavirus nucleocapsid protein
24
Preparation and characterization of a novel nanobody against T-cell immunoglobulin and mucin-3 (TIM-3)
25
Preparation and characterization of a novel organic montmorillonite/fluorinated waterborne polyurethane nanocomposites: Effect of OMMT and HFBMA
26
Preparation and characterization of a novel pachyman-based pharmaceutical aid. II: A pH-sensitive, biodegradable and biocompatible hydrogel for controlled release of protein drugs
27
Preparation and characterization of a novel pachyman-based pharmaceutical aid. II: A pH-sensitive, biodegradable and biocompatible hydrogel for controlled release of protein drugs
28
Preparation and characterization of a novel PA-SiO2 nanofiltration membrane for raw water treatment Original Research Article
29
Preparation and characterization of a novel pH-sensitive chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate composite hydrogel bead for controlled release of diclofenac sodium
30
Preparation and characterization of a novel pH-sensitive chitosan-g-poly (acrylic acid)/attapulgite/sodium alginate composite hydrogel bead for controlled release of diclofenac sodium
31
Preparation and characterization of a novel poly(urea–formaldehyde) microcapsules with similar reflectance spectrum to leaves in the UV–Vis–NIR region of 300–2500 nm
32
Preparation and characterization of a novel polyimide liquid crystal vertical alignment layer
33
Preparation and characterization of a novel polymeric based solid–solid phase change heat storage material
34
Preparation and Characterization of a Novel Polysulfone (PS) Mixed Matrix Membrane Modified with a SAPO-34 Nanofiller for CO2/CH4 Gaseous Mixture Separation
35
Preparation and characterization of a novel polysulfone UF membrane using a copolymer with capsaicin-mimic moieties for improved anti-fouling properties
36
Preparation and characterization of a novel pyrrole-benzophenone copolymerized silica nanocomposite as a reagent in a visual immunologic-agglutination test
37
Preparation and characterization of a novel Sicontaining crosslinkable O-butyrylchitosan
38
Preparation and characterization of a novel Si-incorporated ceramic film on pure titanium by plasma electrolytic oxidation
39
Preparation and characterization of a novel silica aerogel as adsorbent for toxic organic compounds
40
Preparation and characterization of a novel smart polymeric hydrogel for drug delivery of insulin
41
Preparation and characterization of a novel solid titania precursor
42
Preparation and characterization of a novel solvent-resistant and autoclavable polymer membrane
43
Preparation and characterization of a novel starch-based interpolyelectrolyte complex as matrix for controlled drug release Original Research Article
44
Preparation and characterization of a novel strontium-containing calcium phosphate cement with the two-step hydration process
45
Preparation and characterization of a novel thermally stable unsaturated poly(ester-imide) based on 1,4-bis[2′-trifluoromethyl-4′-(4″-carboxylic acid)trimellitimido phenoxy]benzene
46
Preparation and characterization of a novel tobramycin-containing antibacterial collagen film for corneal tissue engineering
47
Preparation and characterization of a novel xanthated chitosan
48
Preparation and characterization of a novel zirconia precursor
49
PREPARATION AND CHARACTERIZATION OF A PAN NANOFIBRE CONTAINING AG NANOPARTICLES VIA ELECTROSPINNING
50
Preparation and characterization of a permanently antimicrobial polymeric material by covalent bonding
51
Preparation and characterization of a photocrosslinkable bioadhesive inspired by marine mussel
52
Preparation and characterization of a PMMA/Ce(OH)3, Pr2O3/graphite nanosheet composite
53
Preparation and characterization of a poly(2-hydroxyethyl methacrylate) biomedical hydrogel
54
Preparation and characterization of a poly(ethylene glycol) grafted carboxymethyl konjac glucomannan copolymer
55
Preparation and characterization of a poly(ethylene glycol) grafted carboxymethyl konjac glucomannan copolymer
56
Preparation and characterization of a poly(imide siloxane) and zeolite L mixed matrix membrane
57
Preparation and characterization of a poly(methyloctadecylsiloxane) thermally immobilized onto zirconized silica stationary phase for high-performance liquid chromatography
58
Preparation and characterization of a polyclonal antibody from rabbit for detection of trinitrotoluene by a surface plasmon resonance biosensor
59
Preparation and characterization of a polyimide membrane
60
Preparation and characterization of a polymeric (PLGA) nanoparticulate drug delivery system with simultaneous incorporation of chemotherapeutic and thermo-optical agents
61
Preparation and characterization of a polypyrrole hybrid film with [Ni(dmit)2]2−, bis(1,3-dithiole-2-thione-4,5-dithiolate)nickellate(II)
62
Preparation and characterization of a powder precursor, consisting of oxides of Li–Al–Si in the form of hydroxyhydrogel for synthesis of β-spodumene ceramics
63
Preparation and characterization of a protein hydrolysate from an oilseed flour mixture
64
Preparation and characterization of a p-tert-butyl-calix[6]-1,4-benzocrown-4-bonded silica gel stationary phase for liquid chromatography
65
Preparation and characterization of a quaternary ammonium derivative of konjac glucomannan
66
Preparation and characterization of a quaternary ammonium derivative of pectin
67
Preparation and characterization of a sandwiched target of enriched neodymium oxide
68
Preparation and characterization of a sandwiched target of enriched neodymium oxide
69
Preparation and characterization of a series of novel complexes by single-walled carbon nanotubes (SWNTs) connected poly(amic acid) containing bithiazole ring
70
Preparation and characterization of a series of thiourea derivatives as phase change materials for thermal energy storage
71
Preparation and characterization of a single-walled aluminosilicate nanotube-iron oxide composite: Its applications to removal of aqueous arsenate
72
Preparation and characterization of a sodium polyacrylate/sodium silicate binder used in oxidation resistant coating for titanium alloy at high temperature
73
Preparation and characterization of a soil reference material from a mercury contaminated site for comparability studies
74
Preparation and characterization of a sulindac sensor based on PVC/TOA–SUL membrane
75
Preparation and characterization of a supported Si3N4 membrane via a non-aqueous sol–gel process
76
Preparation and characterization of a sustained release buccoadhesive system for delivery of terbutaline sulfate
77
Preparation and characterization of a tantalum-containing pitch precursor for carbon materials
78
Preparation and Characterization of a Thermal Barrier Heat-Resistant Silicone Coating
79
Preparation and characterization of a thin continuous faujasite membrane on tubular porous mullite support Original Research Article
80
Preparation and characterization of a three-dimensional printed scaffold based on a functionalized polyester for bone tissue engineering applications
81
Preparation and characterization of a titanium bonding porcelain
82
Preparation and characterization of a titanium(IV) silsesquioxane epoxidation catalyst anchored into mesoporous MCM-41.
83
Preparation and Characterization of a Zirconia Oxygen Sensor with an Internal Reference for Low-Temperature Operation
84
Preparation and characterization of a ZnO powder with the hexagonal plate particles
85
Preparation and characterization of ABS/HIPS heterogeneous cation exchange membranes with various blend ratios of polymer binder
86
Preparation and characterization of absorbable hemostat crosslinked gelatin sponges for surgical applications
87
Preparation and characterization of acetylated corn starch–(PVOH)/clay nanocomposite films
88
Preparation and characterization of ACF for the adsorption of BTX and SO2
89
Preparation and characterization of acid-activated bentonite powders
90
Preparation and Characterization of Acids and Alkali Treated Kaolin Clay
91
Preparation and Characterization of Acrylamide-2-Methyl Propane Sulfonic Acid (AMPS) and Acrylamide (AAm) Hydrogel, and Its Applications in Removal of Heavy Metals (Cu2+, Pb2+)
92
Preparation and characterization of acrylic bone cement with high drug release
93
Preparation and Characterization of Acrylic-Based Electronic Inks by In Situ Emulsifier-Free Emulsion Polymerization for Electrophoretic Displays
94
Preparation and Characterization of Activated Carbon derived from olive stone as adsorbent for Congo Red
95
Preparation and characterization of activated carbon derived from the thermo-chemical conversion of chicken manure
96
Preparation and characterization of activated carbon fiber supporting silver-loaded mesoporous molecular sieves
97
Preparation and characterization of activated carbon for hydrogen storage from waste African oil-palm by microwave-induced LiOH basic activation
98
Preparation and characterization of activated carbon for hydrogen storage from waste African oil-palm by microwave-induced LiOH basic activation
99
Preparation and characterization of activated carbon from a low rank coal Original Research Article
100
Preparation and characterization of activated carbon from acorn shell by physical activation with H2O–CO2 in two-step pretreatment
101
Preparation and characterization of activated carbon from aquatic macrophyte debris and its ability to adsorb anthraquinone dyes
102
Preparation and characterization of activated carbon from bagasse fly ash
103
Preparation and characterization of activated carbon from bagasse fly ash
104
Preparation and characterization of activated carbon from cotton stalks in a two-stage process
105
Preparation and characterization of activated carbon from cotton stalks in a two-stage process
106
Preparation and characterization of activated carbon from date stones by physical activation with steam
107
Preparation and characterization of activated carbon from date stones by physical activation with steam
108
Preparation and characterization of activated carbon from grape stalk by zinc chloride activation
109
Preparation and characterization of Activated Carbon from Iraqi Corns Stalks
110
Preparation and characterization of activated carbon from leather waste microwave-induced pyrophosphoric acid activation
111
Preparation and characterization of activated carbon from leather waste microwave-induced pyrophosphoric acid activation
112
Preparation and characterization of activated carbon from lotus stalk with guanidine phosphate activation: Sorption of Cd(II)
113
Preparation and characterization of activated carbon from lotus stalk with guanidine phosphate activation: Sorption of Cd(II)
114
Preparation and characterization of activated carbon from oil sands coke
115
Preparation and characterization of activated carbon from palm shell by chemical activation with K2CO3
116
Preparation and characterization of activated carbon from pistachio nut shells via microwave-induced chemical activation
117
Preparation and characterization of activated carbon from rice bran
118
Preparation and characterization of activated carbon from rubber-seed shell by physical activation with steam
119
Preparation and characterization of activated carbon from sunflower seed oil residue via microwave assisted K2CO3 activation
120
Preparation and characterization of activated carbon from Typha orientalis leaves
121
Preparation and characterization of activated carbon from wild olive cores (oleaster) by H3PO4 for the removal of Basic Red 46
122
Preparation and characterization of activated carbon from wood via microwave-induced ZnCl2 activation
123
Preparation and characterization of activated carbon from wool waste and the comparison of muffle furnace and microwave heating methods
124
Preparation and characterization of activated carbon produced from pomegranate seeds by ZnCl2 activation
125
Preparation and characterization of activated carbon produced from rice straw by (NH4)2HPO4 activation
126
Preparation and characterization of activated carbons from corn cob
127
Preparation and characterization of activated carbons from oil-palm stones for gas-phase adsorption
128
Preparation and characterization of activated carbons from spirit lees by physical activation
129
Preparation and Characterization of Activated Carbons from Terminalia Arjuna Nut with Zinc Chloride Activation for the Removal of Phenol from Wastewater
130
Preparation and characterization of activated carbons from impregnation pitch by ZnCl2
131
Preparation and characterization of active carbons from oil palm shells
132
Preparation and characterization of active films based on chitosan incorporated tea polyphenols
133
Preparation and characterization of active gelatin-based films incorporated with natural antioxidants
134
Preparation and characterization of active Ni/MgO in oxidative steam reforming of n-C4H10
135
Preparation and characterization of adhesive from spent hen proteins
136
Preparation and characterization of adipic acid dihydrazide derivatives of yeast mannans
137
Preparation and characterization of adsorbents for treatment of water associated with oil production
138
Preparation and characterization of adsorbents for treatment of water associated with oil production
139
Preparation and characterization of aerogels derived from Al(OH)3 and CrO3
140
Preparation and characterization of Ag(Au) bimetallic core–shell nanoparticles with new seed growth method
141
Preparation and characterization of agar/silver nanoparticles composite films with antimicrobial activity
142
Preparation and characterization of agarose–nickel nanoporous composite particles customized for liquid expanded bed adsorption
143
Preparation and characterization of Ag-doped BaTiO3 based X7R ceramics
144
Preparation and characterization of agglomerated porous hollow silica supports for olefin polymerization catalyst
145
Preparation and characterization of AgI nanoparticles with controlled size, morphology and crystal structure
146
Preparation and characterization of Ag-magadiite nanocomposites
147
Preparation and characterization of Ag-TiO2 hybrid clusters powders
148
Preparation and characterization of Ag-TiO2 hybrid clusters powders
149
Preparation and characterization of Al/AlN composites sintered under high pressure
150
Preparation and characterization of Al2O3 hollow fiber membranes
151
Preparation and characterization of Al2O3/TiC micro–nano-composite ceramic tool materials
152
Preparation and characterization of Al2O3–25 mol% ZrO2 composites
153
Preparation and characterization of Al2O3–MgO catalytic supports modified with lithium
154
Preparation and characterization of Al2O3–Ti3SiC2 composites and its functionally graded materials
155
Preparation and characterization of Al2O3–TiO2 powders by chemical synthesis for plasma spray coatings
156
Preparation and characterization of AlCrTaTiZr multi-element nitride coatings
157
Preparation and characterization of alginate and alginate-resistant starch microparticles containing nisin
158
Preparation and characterization of alginate–carrageenan hydrogel films crosslinked using a water-soluble carbodiimide (WSC)
159
Preparation and Characterization of Aligned and Random Nanofibrous Nanocomposite Scaffolds of Poly (Vinyl Alcohol), Poly (e-Caprolactone) and Nanohydroxyapatite
160
Preparation and characterization of alkyl ketene dimer (AKD) modified cellulose composite membrane
161
Preparation and characterization of alkyl methacrylate-based monolithic columns for capillary gas chromatography applications
162
Preparation and characterization of alkyl sulfate and alkylbenzene sulfonate surfactants/TiO2 hybrid thin films by the liquid phase deposition (LPD) method
163
Preparation and characterization of alkylamine-intercalated graphite oxides Original Research Article
164
Preparation and characterization of AlN/FeCoSiB magnetoelectric thin film composites
165
Preparation and characterization of AlN/ZrN and AlN/TiN nanolaminate coatings
166
Preparation and characterization of alternating copolymers containing fluorene and thiophene derivatives
167
Preparation and characterization of alumina and chromia cryogel-based catalysts Original Research Article
168
Preparation and characterization of alumina supported nickel-oxalate catalyst for the hydrodeoxygenation of oleic acid into normal and iso-octadecane biofuel
169
Preparation and characterization of alumina supported silicalite membranes by sol–gel hydrothermal method
170
Preparation and characterization of alumina supported trimanganese tetroxide catalysts Original Research Article
171
Preparation and characterization of alumina-supported molybdenum carbide Original Research Article
172
Preparation and Characterization of Aluminium Hydroxides and Aluminas, Taichi Sato. Litarvan Literature, USA (2007)
173
Preparation and Characterization of Aluminum Nitride Thin Films with the Potential Application in Electro-Acoustic Devices
174
Preparation and characterization of aluminum oxide cermet microfiltration membrane using atmospheric plasma spraying Original Research Article
175
Preparation and characterization of aluminum phthalocyanine acetate, propionate, and benzoate
176
Preparation and characterization of aminated graphite oxide for CO2 capture
177
Preparation and Characterization of Amine-functional SAPO-34 Mixed Matrix Membranes for CO2/CH4 Separation
178
Preparation and characterization of amine-functionalized SiO2/TiO2 films for formaldehyde degradation
179
Preparation and characterization of amino functionalized nano-composite material and its application for multi-residue analysis of pesticides in cabbage by gas chromatography–triple quadrupole mass spectrometry
180
Preparation and characterization of amino-functionalized magnetic nanogels via photopolymerization for MRI applications
181
Preparation and characterization of aminosilane-modified silicate supported with silver for antibacterial behavior
182
Preparation and characterization of ammonium-functionalized silica nanoparticle as a new adsorbent to remove methyl orange from aqueous solution
183
Preparation and characterization of amorphous aluminosilicate polymers from ash formed in combustion of peat and wood mixtures
184
Preparation and characterization of amorphous cadmium–selenium ribbons
185
Preparation and characterization of amorphous manganese sulfide thin films by SILAR method
186
Preparation and characterization of amorphous silica nanowires from natural chrysotile
187
Preparation and characterization of amorphous SiO2 nanowires
188
Preparation and characterization of amorphous SiOx nanowires
189
Preparation and characterization of amphiphilic multi-walled carbon nanotubes
190
Preparation and characterization of ampicillin loaded methylpyrrolidinone chitosan and chitosan microspheres
191
Preparation and characterization of amyloglucosidase adsorbed on activated charcoal
192
Preparation and characterization of an activated carbon from a date stones variety by physical activation with carbon dioxide
193
Preparation and characterization of an activated carbon from a date stones variety by physical activation with carbon dioxide
194
Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles
195
Preparation and characterization of an electrocatalytic electrode using amphiphilic carbonaceous material containing metal compound Original Research Article
196
Preparation and characterization of an electromagnetic material: The graphene nanosheet/polythiophene composite
197
Preparation and characterization of an electronically conductive and chemically modified ultrafiltration type membrane
198
Preparation and characterization of an epoxy nanocomposite toughened by a combination of thermoplastic, layered and particulate nano-fillers
199
Preparation and characterization of an extracellular polysaccharide produced by the deep-sea fungus Penicillium griseofulvum
200
Preparation and characterization of an immunoaffinity chromatography column for the selective extraction of trace contraceptive drug levonorgestrel from water samples
201
Preparation and characterization of an injectable thermosensitive hydrogel for simultaneous delivery of paclitaxel and doxorubicin
202
Preparation and characterization of an L-tyrosine-derivatized β-cyclodextrin-bonded silica stationary phase for liquid chromatography Original Research Article
203
Preparation and characterization of an ultrahydrophobic surface based on a stearic acid self-assembled monolayer over polyethyleneimine thin films
204
Preparation and characterization of an unusual tetracobalt-complex; X-ray crystal structure of [Co2(CO)5{μ-P,P(μ-PPh2CCPPh2)}][Co2(CO)4{μ-P-(μ-PPh2CCPPh2)}]
205
Preparation and characterization of anion-exchange membranes with a semi-interpenetrating network structure of poly(vinyl alcohol) and poly(allyl amine) Original Research Article
206
Preparation and characterization of anionic pullulan thermoassociative nanoparticles for drug delivery
207
Preparation and characterization of anodic films on AZ31B Mg alloy formed in the silicate electrolytes with ethylene glycol oligomers as additives
208
Preparation and characterization of antibacterial Au/C core–shell composite
209
Preparation and characterization of antibacterial silver-dispersed activated carbon aerogels Original Research Article
210
Preparation and characterization of antibacterial viscose-based activated carbon fiber supporting silver Original Research Article
211
Preparation and characterization of anticancer drug-loaded implantable PLGA microparticles
212
Preparation and characterization of anticorrosive layers deposited by micro-arc oxidation on low carbon steel
213
Preparation and characterization of antifouling thermosensitive magnetic nanoparticles for applications in biomedicine
214
Preparation and characterization of anti-fouling β-cyclodextrin/polyester thin film nanofiltration composite membrane
215
Preparation and characterization of antimicrobial Ce-doped ZnO nanoparticles for photocatalytic detoxification of cyanide
216
Preparation and characterization of antimicrobial chitosan-N-arginine with different degrees of substitution
217
Preparation and characterization of antimicrobial nano-hydroxyapatite composites
218
Preparation and characterization of antimicrobial polycarbonate nanofibrous membrane
219
Preparation and characterization of antimicrobial wound dressings based on silver, gellan, PVA and borax
220
Preparation and characterization of aqueous polyaniline battery using a modified polyaniline electrode
221
Preparation and characterization of arabinoxylan esters and arabinoxylan ester/cellulose ester polymer blends
222
Preparation and characterization of arachidic acid self-assembled monolayers on glass substrate coated with sol–gel Al2O3 thin film
223
Preparation and characterization of As2S3 thin films deposited using successive ionic layer adsorption and reaction (SILAR) method
224
Preparation and characterization of As-cast and hot-rolled Mg–3Al–0.5Mn–0.5Zn–1MM alloy
225
Preparation and characterization of ascorbic acid loaded solid lipid nanoparticles and investigation of their apoptotic effects
226
Preparation and characterization of ascorbic acid‑mediated chitosan–copper oxide nanocomposite for anti‑microbial, sporicidal and biofilm‑inhibitory activity
227
Preparation and characterization of asiaticoside-loaded alginate films and their potential for use as effectual wound dressings
228
Preparation and characterization of as-rolled AZ31 magnesium alloy sheets
229
Preparation and characterization of asymmetric membranes based on nonsolvent/NMP/P84 for gas separation
230
Preparation and characterization of asymmetric polyethersulfone and thin-film composite polyamide nanofiltration membranes for water softening
231
Preparation and characterization of atmospheric plasma-sprayed NiCr/Cr3C2–BaF2·CaF2 composite coating
232
Preparation and characterization of Au/CeO2–Al2O3 monoliths
233
Preparation and characterization of Au/Co nano-alloys
234
Preparation and characterization of Au/ZrO2 nanoparticles obtained by oxidation of ZrXAuY alloy
235
Preparation and characterization of Au-In/APTMS-SBA-15 catalysts for chemoselective hydrogenation of crotonaldehyde to crotyl alcohol Original Research Article
236
Preparation and characterization of azithromycin nanodrug using solvent/antisolvent method
237
Preparation and characterization of azlactone functionalized polymer supports and their application as scavengers
238
Preparation and characterization of Ba0.5Sr0.5Fe0.9Ni0.1O3−δ–Sm0.2Ce0.8O1.9 compose cathode for proton-conducting solid oxide fuel cells
239
Preparation and Characterization of Ba0.6K0.4BiO3 Nano Particles with High Visible Light Photo Catalytic Activity
240
Preparation and characterization of Ba1 − xSrxTiO3 thin films deposited on Pt/SiO2/Si by sol–gel method
241
Preparation and characterization of Ba1−xSrxTiO3 thin films for uncooled infrared focal plane arrays
242
Preparation and characterization of BaCe0.95Tb0.05O3−α hollow fibre membranes for hydrogen permeation
243
Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes
244
Preparation and characterization of BaLiF3:Er3+ nanoparticles by the hydrothermal microemulsion synthesized method
245
Preparation and characterization of bamboo-based activated carbon by phosphoric acid activation
246
Preparation and characterization of bamboo-based activated carbons as electrode materials for electric double layer capacitors
247
Preparation and characterization of barium cerate-based thick membranes using a screen printing process
248
Preparation and characterization of barium containing refractory materials
249
Preparation and characterization of barium iron niobate (BaFe0.5Nb0.5O3) ceramics
250
Preparation and characterization of barium titanate nanofibers by electrospinning
251
Preparation and Characterization of BAS Reinforced with SiC Platelets
252
Preparation and characterization of basic carbonates as novel anode materials for lithium-ion batteries
253
Preparation and characterization of BaSnO3 powders by hydrothermal synthesis from tin oxide hydrate gel
254
Preparation and characterization of BaSO4/poly(ethylene terephthalate) nanocomposites
255
Preparation and characterization of BaTiO3 powders and ceramics by sol–gel process using oleic acid as surfactant
256
Preparation and characterization of bear bile-loaded pH sensitive in-situ gel eye drops for ocular drug delivery
257
Preparation and characterization of bentonite/PS-SO3H nanocomposites as an efficient acid catalyst for the Biginelli reaction
258
Preparation and Characterization of BeO-Supported Feldspar Porcelain
259
Preparation and Characterization of Berberine loaded Micelle Formulations with Approach to Oral Drug Delivery
260
Preparation and characterization of Beta/MCM-41composite zeolite with a stepwise-distributed pore structure
261
Preparation and characterization of BF3 supported on coconut shell as a novel and effective nano‑catalyst for one‑pot synthesis of pyrano[2,3‑d]pyrimidines
262
Preparation and characterization of Bi2O3–SiO2–Al2O3 based glasses of good transparency with high Bi2O3 content
263
Preparation and characterization of Bi2S3 thin films using modified chemical bath deposition method
264
Preparation and characterization of Bi2Se3 thin films deposited by successive ionic layer adsorption and reaction (SILAR) method
265
Preparation and characterization of Bi-doped TiO2 and its solar photocatalytic activity for the degradation of isoproturon herbicide
266
Preparation and characterization of BiFeO3 ceramic
267
Preparation and characterization of bifunctional catalysts of the Pd, Pt/H[Ga]MFI types
268
Preparation and characterization of bifunctional oxidative and acidic catalysts Nb2O5/TS-1 for synthesis of diols
269
Preparation and characterization of bifunctional, Fe3O4/ZnO nanocomposites and their use as photocatalysts
270
Preparation and characterization of bilayer carbon/polymer membranes
271
Preparation and Characterization of Bimetallic Catalyst (NiO – CoO) for Desulfurization of Gas Oil
272
Preparation and characterization of bimodal mesoporous montmorillonite by using single template
273
Preparation and characterization of bimodal porous poly(γ-benzyl-L-glutamate) scaffolds for bone tissue engineering
274
Preparation and Characterization of Binary Polymer Blend Reinforced with Polypropylene, Carbon and Hybrid Fibers
275
Preparation and Characterization of Biobriquettes from Coconut Shell, Nutmeg Shell, and Canary Shell Waste in North Maluku, Indonesia
276
Preparation and characterization of bio-compatible Fe3O4@Polydopamine spheres with core/shell nanostructure
277
Preparation and characterization of biocompatible magnetic carbon nanotubes
278
Preparation and characterization of biocomposite films of carrageenan/locust bean gum/montmorrillonite for transdermal delivery of curcumin
279
Preparation and characterization of biodegradable alkylether derivatives of hyaluronan
280
Preparation and characterization of biodegradable chitosan/hydroxyapatite nanocomposite rods via in situ hybridization: a potential material as internal fixation of bone fracture
281
Preparation and characterization of biodegradable copolyester–starch based foams
282
Preparation and characterization of biodegradable methyl cellulose/montmorillonite nanocomposite films
283
Preparation and characterization of biodegradable nanoparticles based on amphiphilic poly(3-hydroxybutyrate)–poly(ethylene glycol)–poly(3-hydroxybutyrate) triblock copolymer
284
Preparation and characterization of biodegradable paclitaxel loaded alginate microparticles for pulmonary delivery
285
Preparation and characterization of biodegradable PLA polymeric blends
286
Preparation and characterization of biodegradable poly(l-lactide)/chitosan blends
287
Preparation and characterization of biodegradable poly-3-hydroxybutyrate–starch blend films
288
Preparation and characterization of bio-diesels from various bio-oils
289
Preparation and characterization of biomass carbon-based solid acid catalyst for the esterification of oleic acid with methanol
290
Preparation and characterization of bionanocomposite fiber based on cellulose and nano-SiO2 using ionic liquid
291
Preparation and characterization of bio-nanocomposite films based on soy protein isolate and montmorillonite using melt extrusion Original Research Article
292
Preparation and characterization of bionanocomposite films filled with nanorod-rich zinc oxide
293
Preparation and characterization of bio-nanocomposite films of agar and silver nanoparticles: Laser ablation method
294
Preparation and characterization of bio-oils from internally circulating fluidized-bed pyrolyses of municipal, livestock, and wood waste
295
Preparation and characterization of bipolar membranes modified by photocatalyst nano-ZnO and nano-CeO2
296
Preparation and characterization of bis[4-dimethylamino-2-pyrimidyl] dichalcogenides (S, Se, Te): X-ray crystal structure of bis[4-dimethylamino-2-pyrimidyl] diselenide and its physicochemical behavior in microemulsion media
297
Preparation and characterization of bismaleimide/1,3-dicyanatobenzene modified epoxy intercrosslinked matrices
298
Preparation and characterization of bismaleimide-triazine/epoxy interpenetrating polymer networks
299
Preparation and characterization of bismuth oxide nanoparticles-multiwalled carbon nanotube composite for the development of horseradish peroxidase based H2O2 biosensor
300
Preparation and Characterization of Bismuth Sulfide (Bi2S3) Nanostructures by Ultrasonic Method
301
Preparation and Characterization of Black Pomegranate Peel Extract-Loaded Nanofibers Using Electrospinning
302
Preparation and Characterization of Blending Sulfonated Poly(ether ether ketone) with Charged Surface Modifying Macromolecules
303
Preparation and characterization of blends made of poly(l-lactic acid) and β-cyclodextrin: Improvement of the blend properties by using a masterbatch
304
Preparation and characterization of blends of recycled polystyrene with cassava starch
305
Preparation and characterization of blue color aluminum pigments Al/SiO2/PB with double-layer structure
306
Preparation and characterization of bonded silica hydride intermediate from triethoxysilane and dimethylmethoxysilane using supercritical carbon dioxide and dioxane as reaction medium
307
Preparation and characterization of bonded stationary phases of nitrogen-containing crown ether for high-performance liquid chromatography
308
Preparation and characterization of Boron carbide nanoparticles for use as a novel agent in T cell-guided boron neutron capture therapy
309
Preparation and characterization of boron nitride coatings on carbon fibers from borazine by chemical vapor deposition
310
Preparation and characterization of boron oxide-based red-emitting phosphors using Eu, Al and Ca additives
311
Preparation and characterization of boron oxysulfide glasses
312
Preparation and characterization of boron-doped titania nano-materials with antibacterial activity
313
Preparation and characterization of boron-incorporated amorphous carbon films from a natural source of camphoric carbon as a precursor material
314
Preparation and characterization of borosilicate glass-ceramics containing zirconolite and titanite crystalline phases
315
Preparation and characterization of bovine serum albumin nanocarrier conjugated to exosome to sustained release of 5-flurouracil: Release and antitumoral evaluation
316
Preparation and characterization of brake linings from modified tannin-phenol formaldehyde resin and asbestos-free fillers
317
Preparation and characterization of branched chitosans
318
Preparation and characterization of branched polymers as postoperative anti-adhesion barriers
319
Preparation and characterization of BSCCO 2212 thin films
320
Preparation and characterization of C/Ni–PTFE electrode using Ni–PTFE composite plating for alkaline fuel cells
321
Preparation and characterization of C/SiC–ZrB2 composites by precursor infiltration and pyrolysis process
322
Preparation and characterization of C54 TiSi2 nanoislands on Si (1 1 1) by laser deposition of TiO2
323
Preparation and characterization of cadmium–calcium hydroxyapatite solid solution particles
324
Preparation and characterization of CaF2:Ce3+ nanoparticles with spectroscopic studies
325
Preparation and characterization of caffeic acid grafted chitosan/CPTMS hybrid scaffolds
326
Preparation and characterization of caffeic acid grafted chitosan/CPTMS hybrid scaffolds
327
Preparation and characterization of calcium cobaltite for thermoelectric application
328
Preparation and characterization of calcium phosphate deposited on gold nanoparticles
329
Preparation and Characterization of Calcium Phosphate Nanorods using Reverse Microemulsion and Hydrothermal Processing Routes
330
Preparation and Characterization of Camptothecin Grafted Chitosan Oligosaccharide Nanomicelles
331
Preparation and characterization of camptothecin powder micronized by a supercritical antisolvent (SAS) process
332
Preparation and characterization of CaO nanoparticles from Ca(OH)2 by direct thermal decomposition method
333
Preparation and characterization of captopril loaded polycaprolactone electrospun nanofibers
334
Preparation and characterization of carbamoylphosphonate(CMPO) silane grafted on various mesoporous silicas Original Research Article
335
Preparation and characterization of carbon adsorbents from furfural Original Research Article
336
Preparation and characterization of carbon aerogel microspheres by an inverse emulsion polymerization
337
Preparation and characterization of carbon based acid catalysts for the dehydration of 2-propanol Original Research Article
338
Preparation and characterization of carbon black/acrylic copolymer hybrid particles for dual particle electrophoretic display
339
Preparation and characterization of carbon composite plates using Ni-PTFE composite nano-plating
340
Preparation and characterization of carbon covered TiO2 using sucrose for solar photodegradation
341
Preparation and characterization of carbon cryogel microspheres Original Research Article
342
Preparation and characterization of carbon fibers coated by Fe3O4 nanoparticles
343
Preparation and characterization of carbon films prepared from poly(vinyl alcohol) containing metal oxide and nano fibers with iodine pretreatment Original Research Article
344
Preparation and characterization of carbon foam derived from pitch and phenolic resin using a soft templating method
345
Preparation and characterization of carbon foam derived from pitch and phenolic resin using a soft templating method
346
Preparation and characterization of carbon foams derived from aluminosilicate and phenolic resin Original Research Article
347
Preparation and characterization of carbon foams with high mechanical strength using modified coal tar pitches
348
Preparation and characterization of carbon foams with high mechanical strength using modified coal tar pitches
349
Preparation and characterization of carbon membranes made from poly(phthalazinone ether sulfone ketone) Original Research Article
350
Preparation and characterization of carbon molecular sieve membranes based on resorcinol–formaldehyde resin
351
Preparation and characterization of carbon molecular sieve membranes derived from BTDA–ODA polyimide and their gas separation properties
352
Preparation and characterization of carbon molecular sieve membranes for gas separation—the effect of incorporated multi-wall carbon nanotubes Original Research Article
353
Preparation and characterization of carbon nanoparticles loaded TiO2 and its catalytic activity driven by natural sunlight
354
Preparation and characterization of carbon nanotube reinforced silicon nitride composites
355
Preparation and characterization of carbon nanotube/polyetherimide nanocomposite films
356
Preparation and characterization of carbon nanotube-grafted-chitosan – Natural hydroxyapatite composite for bone tissue engineering
357
Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composite
358
Preparation and characterization of carbon nanotube-promoted Co–Cu catalyst for higher alcohol synthesis from syngas
359
Preparation and characterization of carbon nanotubes encapsulated GaN nanowires Original Research Article
360
Preparation and characterization of carbon nanotubes for energy storage
361
Preparation and characterization of carbon nanotubes/epoxy resin nano-prepreg for nanocomposites Original Research Article
362
Preparation and characterization of carbon nanotubes/monotropic liquid crystal composites
363
Preparation and characterization of carbon nanotubes-polymer/CdSe hybrid nanocomposites through combining electrostatic adsorption and ATRP technique
364
Preparation and characterization of carbon paste micro-electrode based on carbon nano-particles
365
Preparation and characterization of carbon sheets composed of two layer planes
366
Preparation and characterization of carbon/carbon aircraft brake materials with long service life and good frictional properties
367
Preparation and characterization of carbon/carbon aircraft brake materials with long service life and good frictional properties
368
Preparation and characterization of carbon/nickel oxide nanocomposite coatings for solar absorber applications
369
Preparation and characterization of carbonaceous adsorbents from sewage sludge using a pilot-scale microwave heating equipment
370
Preparation and characterization of carbonaceous adsorbents from sewage sludge using a pilot-scale microwave heating equipment
371
Preparation and characterization of carbonaceous materials containing nitrogen as electrochemical capacitor
372
Preparation and characterization of carbonaceous materials obtained from pitch containing organometallics
373
Preparation and characterization of carbonate terminated polycrystalline Al2O3/Al films
374
Preparation and characterization of carbon-coated LiFePO4 cathode materials for lithium-ion batteries with resorcinol–formaldehyde polymer as carbon precursor
375
Preparation and characterization of carbon-coated ZnO and CaO powders by pyrolysis of PVA
376
Preparation and characterization of carbon-enriched coal fly ash
377
Preparation and characterization of carbonized polyimide containing palladium compounds
378
Preparation and characterization of carbon-related materials supports for catalysts of direct methanol fuel cells
379
Preparation and characterization of carbons for the retention of halogens in the condenser vacuum system of a thermonuclear plant
380
Preparation and characterization of carbon-supported Pt, PtSnO2 and PtRu nanoparticles for direct methanol fuel cells
381
Preparation and characterization of carbon-supported PtRuIr catalyst with excellent CO-tolerant performance for proton-exchange membrane fuel cells
382
Preparation and characterization of carbon-supported PtTi alloy electrocatalysts
383
Preparation and Characterization of Carbosilane Dendrimers Carrying Mesogens with Chiral Substituent
384
Preparation and characterization of carboximidate iron(II) complexes
385
Preparation and characterization of carboxyliccontaining poly(methyl methacrylate) Tnanolatexes
386
Preparation and characterization of carboxymethyl derivatives of yeast mannans in aqueous solutions
387
Preparation and characterization of carboxymethyl-gellan and pullulan blend films
388
Preparation and characterization of carrageenan-based nanocomposite films reinforced with clay mineral and silver nanoparticles
389
Preparation and characterization of casein-stabilized gold nanoparticles for catalytic applications
390
Preparation and characterization of catalyst thin films
391
Preparation and characterization of catalysts based on oniumsilica-immobilized Keggin acids
392
Preparation and characterization of catalytic TiO2–SPPESK–PES nanocomposite membranes and kinetics analysis in esterification
393
Preparation and characterization of catena-[bromo(tetrahydrofuran-O)(2-thioxo-1,3-dithiole-4,5- dithiolato)antimony(III)], [Br(THF)Sb(dmit)]n
394
Preparation and characterization of cationic corn starch with a high degree of substitution in dioxane–THF–water media Original Research Article
395
Preparation and characterization of cationic curcumin nanoparticles for improvement of cellular uptake
396
Preparation and characterization of cationic PLGA nanospheres as DNA carriers
397
Preparation and characterization of cationic poly vinyl alcohol with a low degree of substitution
398
Preparation and characterization of cationic surfactant-intercalated graphite oxide Original Research Article
399
Preparation and characterization of Cd2Nb2O7 thin films on Si substrates Original Research Article
400
Preparation and Characterization of CdO Thin Films Obtained by Oxidation of Obliquely Evaporated Cd Thin Films
401
Preparation and characterization of CdO thin films obtained by thermal oxidation of evaporated Cd thin films
402
preparation and characterization of CdS and ZnS nanosized particles obtained by the inert gas evaporation method
403
Preparation and characterization of CdS hollow spheres
404
Preparation and characterization of CdS nanoparticles by ultrasonic irradiation
405
Preparation and characterization of CdS nanowire arrays by dc electrodeposit in porous anodic aluminum oxide templates
406
Preparation and characterization of CdS/Si coaxial nanowires
407
Preparation and characterization of CdSe and PbSe nanoparticles via aqueous solution for nanoparticle-based solar cells
408
Preparation and characterization of CdSe nanocrystals via Na2SO3-assisted photochemical route
409
Preparation and characterization of CdxZn1−xS thin films by spray pyrolysis technique for photovoltaic applications
410
Preparation and characterization of Ce/Zr mixed oxides and their use as catalysts for the direct oxidation of dry CH4
411
Preparation and characterization of Ce0.8M0.2O2−δ (M = Y, Gd, Sm, Nd, La) solid electrolyte materials for solid oxide fuel cells
412
Preparation and characterization of Ce0.95Zr0.05O2 nanopowders obtained by sol–gel and template methods
413
Preparation and characterization of Ce1−x(Gd0.5Pr0.5)xO2 electrolyte for IT-SOFCs
414
Preparation and characterization of Ce1-x NixO2 as oxygen carrier for selective oxidation methane to syngas in absence of gaseous oxygen
415
Preparation and characterization of Ce1-xFexO2 complex oxides and its catalytic activity for methane selective oxidation
416
Preparation and characterization of Ce-Fe-Zr-O(x)/MgO complex oxides for selective oxidation of methane to synthesize gas
417
Preparation and Characterization of Celecoxib Agglomerated Nanocrystals and Dry Powder Inhalation Formulations to Improve its Aerosolization Performance
418
Preparation and Characterization of Celecoxib Dispersions in Soluplus®: Comparison of Spray Drying and Conventional Methods
419
Preparation and characterization of celecoxib solid dispersions; comparison of poloxamer-188 and PVP-K30 as carriers
420
Preparation and Characterization of Celecoxib-Conjugated Polyethylenimine as a Potential Nanocarrier for Gene Delivery
421
Preparation and characterization of cellulase-bound magnetite nanoparticles
422
Preparation and Characterization of Cellulose Acetate Microencapsulated N-Octadecane for Thermal Regulation Applications
423
Preparation and characterization of cellulose acetate/carboxymethyl cellulose acetate blend ultrafiltration membranes Original Research Article
424
Preparation and characterization of cellulose acetate–Fe2O3 composite nanofibrous materials
425
Preparation and characterization of cellulose gels from corn cobs
426
Preparation and characterization of cellulose hybrids grafted with the polyhedral oligomeric silsesquioxanes (POSS)
427
Preparation and characterization of cellulose hybrids grafted with the polyhedral oligomeric silsesquioxanes (POSS)
428
Preparation and characterization of cellulose nanocomposite hydrogels as functional electrolytes
429
Preparation and characterization of cellulose nanocrystals from rice straw
430
Preparation and characterization of cellulose nanofibers from de-pectinated sugar beet pulp
431
Preparation and characterization of cellulose nanowhiskers from cotton fibres by controlled microbial hydrolysis
432
Preparation and characterization of cellulose nitrate-acetate mixed ester fibers
433
Preparation and characterization of cellulose/chitosan blend films
434
Preparation and characterization of cellulose/chitosan blend films
435
Preparation and characterization of cellulose/hydrous niobium oxide hybrid
436
Preparation and characterization of CeO2 doped ZnO nano-tubes fluorescent composite
437
Preparation and characterization of CeO2 highly dispersed on activated carbon
438
Preparation and characterization of CeO2/TiO2 nanoparticles by flame spray pyrolysis
439
Preparation and characterization of CePtCl6 films and their electrocatalytic properties with NAD+, l-cystine and sulfur oxoanions
440
Preparation and characterization of ceramic composites derived from rice husk ash and polysiloxane
441
Preparation and characterization of ceramic foam produced via polymeric foam replication method
442
Preparation and characterization of ceramic interconnect La0.8Ca0.2Cr0.9M0.1O3−δ (M = Al, Co, Cu, Fe) for IT-SOFCs
443
Preparation and characterization of ceramic nanocomposites in the PZT–BT system
444
Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives
445
Preparation and characterization of ceramic/carbon coated Fe3O4 magnetic nanoparticle nanocomposite as a solid-phase microextraction adsorbent
446
Preparation and characterization of ceramide-based liposomes with high fusion activity and high membrane fluidity
447
Preparation and characterization of ceria co-doped with Ca and Mg
448
Preparation and Characterization of Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFC)
449
Preparation and characterization of cerium (IV) oxide thin films by spray prolysis method
450
Preparation and characterization of cerium doped silica sol–gel coatings on glass and aluminum substrates
451
Preparation and characterization of cerium oxide doped TiO2 nanoparticles Original Research Article
452
Preparation and characterization of cerium oxide templated from activated carbon
453
Preparation and characterization of Ce–W composite nanopowder
454
Preparation and characterization of Ce–W composite nanopowder
455
Preparation and characterization of Ce-Zr and Ce-Mn based oxides for n-hexane combustion: Application to catalytic membrane reactors
456
Preparation and characterization of chalcopyrite compound for thin film solar cells
457
Preparation and characterization of charcoals that contain dispersed aluminum oxide as adsorbents for removal of fluoride from drinking water Original Research Article
458
Preparation and characterization of chars and activated carbons from Saskatchewan lignite
459
Preparation and characterization of chars from oil palm waste Original Research Article
460
Preparation and Characterization of Chemical Bath Deposition synthesis CdS Nanocrystalline Thin Films
461
Preparation and characterization of chemical gradient surfaces and their application for the study of cellular interaction phenomena
462
Preparation and characterization of chemically activated carbons derived from Mediterranean Posidonia oceanica (L.) fibres
463
Preparation and characterization of chemically activated carbons derived from Mediterranean Posidonia oceanica (L.) fibres
464
Preparation and characterization of chemically deposited PbSnS3 thin films
465
Preparation and characterization of chemically stable polymer electrolyte membranes by radiation-induced graft copolymerization of four monomers into ETFE films
466
Preparation and characterization of chemically synthesized poly(N-methylaniline)
467
Preparation and characterization of chemically synthesized polyaniline–polystyrene blends as a carbon dioxide gas sensor
468
Preparation and characterization of Chicory leaf powder and its application as a nano‑native plant sorbent for removal of Acid Blue 25 from aqueous media: isotherm, kinetic and thermodynamic study of the adsorption phenomenon
469
Preparation and characterization of chitin whisker-reinforced silk fibroin nanocomposite sponges
470
Preparation and characterization of chitosan and trimethylchitosan (TMC) nanoparticles loaded with inactivated polio virus and coated with sodium alginate
471
Preparation and characterization of chitosan encapsulated Sargassum sp. biosorbent for nickel ions sorption
472
Preparation and characterization of chitosan hydrogel membrane for the permeation of 5-Fluorouracil
473
Preparation and characterization of chitosan microspheres for doxycycline delivery
474
Preparation and characterization of chitosan microspheres for doxycycline delivery
475
Preparation and Characterization of Chitosan Nanocomposite Based on Nanoscale Silver and Nanomontmorillonite
476
Preparation and characterization of chitosan/cashew gum beads loaded with Lippia sidoides essential oil
477
Preparation and characterization of chitosan/gelatin microcapsules containing triclosan
478
Preparation and characterization of chitosan/genipin/poly(N-vinyl-2-pyrrolidone) films for controlled release drugs
479
Preparation and characterization of chitosan/graphene oxide composites for the adsorption of Au(III) and Pd(II)
480
Preparation and characterization of chitosan/HP-β-cyclodextrins composites with high sorption capacity for carvacrol
481
Preparation and characterization of Chitosan/Konjac glucomannan/CdS nanocomposite film with low infrared emissivity
482
Preparation and characterization of chitosan/poly(vinyl alcohol) chemically crosslinked blends for biomedical applications
483
Preparation and characterization of chitosan/poly(vinyl alcohol) chemically crosslinked blends for biomedical applications
484
Preparation and characterization of chitosan/sodium alginate (CSA) microcapsule containing Cortex Moutan
485
Preparation and characterization of chitosan–clay nanocomposites with antimicrobial activity Original Research Article
486
Preparation and characterization of chitosan–gelatin/nanohydroxyapatite composite scaffolds for tissue engineering applications
487
Preparation and characterization of chitosan–gelatin/nanohydroxyapatite composite scaffolds for tissue engineering applications
488
Preparation and characterization of chitosan-g-poly(vinyl alcohol)/poly(vinyl alcohol) blends used for the evaluation of blood-contacting compatibility
489
Preparation and characterization of chitosan-grafted multiwalled carbon nanotubes and their electrochemical properties Original Research Article
490
Preparation and characterization of chitosan-hydroxybenzotriazole/polyvinyl alcohol blend nanofibers by the electrospinning technique
491
Preparation and characterization of chitosan–poly(acrylic acid) polymer magnetic microspheres
492
Preparation and characterization of chitosan–polylactide composites blended with Cloisite 30B for control release of the anticancer drug paclitaxel
493
Preparation and characterization of chitosans carrying aldehyde functions generated by nitrogen oxides
494
Preparation and characterization of chloramphenicol niosomes and comparison with chloramphnicol eye drops (0.5%w/v) in experimental conjunctivitis in albino rabbits
495
Preparation and characterization of chloro- and polyhydride complexes of rhenium: Variable-temperature NMR spectroscopy and protonation studies
496
Preparation and characterization of chloromethylated/quanternized poly (phthalazinone ether sulfone) anion exchange membrane
497
Preparation and characterization of chromophore group containing cyclotriphosphazenes: IV spectroscopic and thermal investigation of some hexakis( p-phenylazo-o-allylphenoxy)cyclotriphosphazenes
498
Preparation and characterization of chromophore group containing cyclotriphosphazenes: IV spectroscopic and thermal investigation of some hexakis( p-phenylazo-o-allylphenoxy)cyclotriphosphazenes
499
Preparation and characterization of citratoperoxotitanate barium compound for BaTiO3 synthesis
500
Preparation and characterization of CNTs–TiO2 composites
501
Preparation and characterization of Co mordenite coatings onto cordierite monoliths as structured catalysts
502
Preparation and Characterization of Co(II), Ni(II) and Cu(II) ions Binuclear Complexes with Macrocyclic Schiff Base Derived from Acidhydrazide and α-Hydroxy Ketone
503
Preparation and characterization of Co2+ substituted Li–Dy ferrite ceramics
504
Preparation and characterization of Co2+-doped LiAl5O8 nano-crystal powders by sol–gel technique
505
Preparation and characterization of Co2+-doped ZnO–Al2O3–SiO2 glass-ceramics by the sol–gel method
506
Preparation and characterization of coated nanoscale Cu/SiCp composite particles
507
Preparation and characterization of coaxial electrospun thermoplastic polyurethane/collagen compound nanofibers for tissue engineering applications
508
Preparation and characterization of coaxial multiwalled carbon nanotubes/polyaniline tubular nanocomposites for electrochemical energy storage in the presence of sodium alginate
509
Preparation and characterization of coaxial multiwalled carbon nanotubes/polyaniline tubular nanocomposites for electrochemical energy storage in the presence of sodium alginate
510
Preparation and characterization of Co-B flowers with mesoporous structure
511
Preparation and characterization of cobalt oxide nanosized particles obtained by an electrochemical method
512
Preparation and characterization of Cobalt Sulfophthalocyanine/TiO2/fly-ash cenospheres photocatalyst and study on degradation activity under visible light
513
Preparation and characterization of cobalt-containing P,N-ligands and an unusual palladium complex ion pair: their applications in amination reactions
514
Preparation and characterization of Co-doped BaTiO3 nanosized powders and ceramics
515
Preparation and characterization of Co-doped TiO2 materials for solar light induced current and photocatalytic applications
516
Preparation and characterization of Co-doped ZnO nanomaterials
517
Preparation and characterization of coenzyme Q10-loaded PMMA nanoparticles by a new emulsification process based on microfluidization
518
Preparation and characterization of coke resistant Ni/SiO2 catalyst for carbon dioxide reforming of methane
519
Preparation and characterization of collagen-based ADSC-carrier sheets for cardiovascular application
520
Preparation and Characterization of Collagen-GAGs Bioactive Matrices for Tissue Engineering
521
Preparation and characterization of colloidal dispersions of layered niobium chalcogenides
522
Preparation and characterization of colloidal Ni(OH)2/bentonite composites
523
Preparation and Characterization of Colloidal Silica in Alkaline and Constant Range of pH
524
Preparation and characterization of colored aluminum pigments Al/SiO2/Fe2O3 with double-layer structure
525
Preparation and characterization of combi-CLEAs catalyzing multiple non-cascade reactions
526
Preparation and Characterization of CoMn/TiO2 Catalysts for Production of Light Olefins
527
Preparation and characterization of complex ferrite nanoparticles by a polymer-pyrolysis route
528
Preparation and characterization of complexes of liposomes with gold nanoparticles
529
Preparation and characterization of complexes of RE3+ with furfural modified water-soluble chitosan
530
Preparation and Characterization of complexes VO(IV) and Cu(II) with the new ligand (1,2-diphenylethane-1,2-diylidene-bis(hydrazine-2,1-iylidene))bis (methan-1-yl-1-ylidene)diphenol (DEDHIMD) and study biological activaty
531
Preparation and Characterization of Component Materials for Intermediate Temperature Solid Oxide Fuel Cell by Glycine-Nitrate Process
532
Preparation and characterization of composite electrodes of coconut-shell-based activated carbon and hydrous ruthenium oxide for supercapacitors
533
Preparation and characterization of composite electrolytes based on PEO(375)-grafted fumed silica
534
Preparation and characterization of composite membranes based on sulfonated PEEK and AlPO4 for PEMFCs
535
Preparation and characterization of composite membranes composed of zirconium tricarboxybutylphosphonate and polybenzimidazole for intermediate temperature operation
536
Preparation and characterization of composite microspheres for brachytherapy and hyperthermia treatment of cancer
537
Preparation and characterization of composite multichannel capillary membranes on the way to nanofiltration
538
Preparation and characterization of composite nanofibers of polycaprolactone and nanohydroxyapatite for osteogenic differentiation of mesenchymal stem cells
539
Preparation and characterization of composite NF membrane from a graft copolymer of trimethylallyl ammonium chloride onto chitosan by toluene diisocyanate cross-linking Original Research Article
540
Preparation and characterization of composite palladium membranes on sinter-metal supports with a ceramic barrier against intermetallic diffusion
541
Preparation and characterization of composite resin by vinyl chloride grafted onto poly(BA-EHA)/poly(MMA-St)
542
Preparation and characterization of composite sodium caseinate edible films incorporating naturally emulsified oil bodies
543
Preparation and characterization of conducting poly(vinyl chloride)-g-poly(aniline) copolymer
544
Preparation and characterization of conducting polyaniline/silica nanosheet composites
545
Preparation and characterization of conducting polymer/silver hexacyanoferrate nanocomposite
546
Preparation and characterization of conductive carbon nanotube–polystyrene nanocomposites using latex technology
547
Preparation and characterization of conductive fabrics coated uniformly with polypyrrole nanoparticles
548
Preparation and characterization of conductive nanostructured particles based on polyaniline and cellulose nanofibers
549
Preparation and characterization of conductive nanostructured particles based on polyaniline and cellulose nanofibers
550
Preparation and characterization of conductive polyaniline/silica hybrid composites prepared by sol–gel process
551
Preparation and characterization of conductor–insulator–semiconductor sandwich-structured MWCNT/double-layer polymer hybrid nanocomposites
552
Preparation and characterization of controlled release poly-ɛ-caprolactone microparticles of isoniazid for drug delivery through pulmonary route
553
Preparation and characterization of CoO used as anodic material of lithium battery
554
Preparation and characterization of co-polyamide thin film composite membrane from piperazine and 3,5-diaminobenzoic acid Original Research Article
555
Preparation and characterization of copolymerized aminopropyl/phenylsilsesquioxane microparticles
556
Preparation and Characterization of Copper and/or Cerium Catalysts Supported on Alumina or Ceria
557
Preparation and characterization of copper indium diselenide films by electroless deposition
558
Preparation and characterization of copper indium disulfide films by facile chemical method
559
Preparation and characterization of copper metal nanoparticles using dendrimers as protectively colloids
560
Preparation and characterization of copper nanoparticles encapsulated inside ZSM-5 zeolite and NO adsorption
561
Preparation and characterization of copper nanoparticles/zinc oxide composite modified electrode and its application to glucose sensing
562
Preparation and characterization of copper oxide particles incorporated polyurethane composite nanofibers by electrospinning
563
Preparation and characterization of copper telluride thin films by modified chemical bath deposition (M-CBD) method
564
Preparation and characterization of copper-doped anatase TiO2 nanoparticles with visible light photocatalytic antibacterial activity
565
PREPARATION AND CHARACTERIZATION OF CO-PROCESSED EXCIPIENT CARRAGEENAN-PREGELATINIZED CASSAVA STARCH PROPIONATE AS A MATRIX IN THE GASTRORETENTIVE DOSAGE FORM
566
Preparation and characterization of cordierite powders
567
Preparation and characterization of core/shell particles with siloxane in the shell
568
Preparation and characterization of core-shell monodispersed magnetic silica microspheres
569
Preparation and characterization of core–shell polyaniline–polystyrene sulfonate@Fe3O4 nanoparticles
570
Preparation and characterization of core–shell structure of SiO2@Cu antibacterial agent
571
Preparation and characterization of core-shell structured TiO2¯BaCO3 particles,
572
Preparation and characterization of core-shell structured α-Fe2O3/SiC spheres
573
Preparation and characterization of core–shell-like PbPt nanoparticles electro-catalyst supported on graphene for methanol oxidation
574
Preparation and characterization of Co–Rh bimetallic model catalysts: From thin films to dispersed clusters Original Research Article
575
Preparation and characterization of corn cob activated carbon coated with nano-sized magnetite particles for the removal of Cr(VI)
576
Preparation and characterization of Co–Ru/TiO2/MWCNTs electrocatalysts in PEM hydrogen electrolyzer
577
Preparation and characterization of Co-Sn-C anodes for lithium-ion batteries
578
Preparation and characterization of Co–W alloys as anode materials for methanol fuel cells
579
Preparation and characterization of Cp-functionalized cycloheptatrienyl–cyclopentadienyl titanium sandwich complexes (troticenes)
580
Preparation and characterization of CPPO/BPPO blend membranes for potential application in alkaline direct methanol fuel cell
581
PREPARATION AND CHARACTERIZATION OF CR (III), MO (V) AND W (VI) COMPLEXES USING SOME SCHIFF BASES
582
Preparation and Characterization of Cr(III) Cu(II) Complexes With Mixed Ligand Containing Isatinazine and Semicarbazones
583
Preparation and characterization of Cr2O3–TiO2–Al2O3–V2O5 green pigment
584
Preparation and Characterization of Crayfish (Astacus leptodactylus) Chitosan with Different Deacetylation Degrees
585
Preparation and characterization of Cr-doped LiMnO2 cathode materials by Pechiniʹs method for lithium ion batteries
586
Preparation and characterization of crednerite glass–ceramics in the MnO·CuO·SiO2 system
587
Preparation and characterization of CrNxOy thin films: The effect of composition and structural features on the electrical behavior
588
Preparation and characterization of cross-linked collagen–phospholipid polymer hybrid gels
589
Preparation and characterization of cross-linked enzyme aggregates (CLEAs) of recombinant poly-3-hydroxybutyrate depolymerase from Streptomyces exfoliatus
590
Preparation and Characterization of Cross-linked Enzyme Aggregates of Saccharomyces Cerevisiae Invertase
591
Preparation and characterization of cross-linked enzyme crystals of laccase
592
Preparation and characterization of crosslinked poly(ethylene glycol) diacrylate hydrogels as fouling-resistant membrane coating materials
593
Preparation and characterization of crosslinked poly(ethylene glycol) diacrylate membranes with excellent antifouling and solvent-resistant properties
594
Preparation and characterization of crosslinked polyimide–poly(dimethylsiloxane)s
595
Preparation and characterization of crosslinked porous cellulose beads
596
Preparation and characterization of crosslinked proton conducting membranes based on chitosan and PSSA-MA copolymer
597
Preparation and characterization of crosslinked PVA/SiO2 hybrid membranes containing sulfonic acid groups for direct methanol fuel cell applications
598
Preparation and characterization of cross-linked quaternized poly(vinyl alcohol) membranes for anion exchange membrane fuel cells
599
Preparation and characterization of crosslinked starch microspheres using a two-stage water-in-water emulsion method
600
Preparation and characterization of cross-linked starch polyurethanes
601
Preparation and characterization of cross-linked starch polyurethanes
602
Preparation and characterization of cross-linking PEG/MDI/PE copolymer as solid–solid phase change heat storage material
603
Preparation and characterization of Cr–P coatings by electrodeposition from trivalent chromium electrolytes using malonic acid as complex
604
Preparation and characterization of CS/ PEO/ cefazolin nanofibers with in vitro and in vivo testing
605
Preparation and characterization of Cs/Al/Fe3O4 nanocatalysts for biodiesel production
606
Preparation and Characterization of Cs2.8H1.2PMo11Fe (H2O)O39·6H2O and Investigation of Effects of IronSubstitution on Heterogeneous Oxidative Dehydrogenation of 2-Propanol
607
Preparation and characterization of CS–Fe3O4@ZnS:Mn magnetic-fluorescent nanoparticles in aqueous media
608
Preparation and Characterization of Cu (II), Mn(II) and Zn(II)complexes with new sulfamethoxazole Compounds
609
Preparation and characterization of Cu and Zn modified nickel manganite NTC powders and thick film thermistors
610
Preparation and characterization of Cu(II), Ni(II) or Co(II) ion-doped goethite samples and their conversion to magnetite in NH3–FeSO4–H2O medium
611
Preparation and characterization of Cu(In,Ga)(Se,S)2 films without selenization by co-sputtering from Cu(In,Ga)Se2 quaternary and In2S3 targets
612
Preparation and characterization of Cu(In,Ga)(Se,S)2 thin films from electrodeposited precursors for hydrogen production
613
Preparation and characterization of Cu(OH)2 and CuO nanowires by the coupling route of microemulsion with homogenous precipitation
614
Preparation and characterization of Cu/SiO2 catalyst by co-gelation process
615
Preparation and characterization of Cu2O–TiO2: Efficient photocatalytic degradation of methylene blue
616
Preparation and characterization of Cu-Ce-La mixed oxide as water-gas shift catalyst for fuel cells application
617
Preparation and characterization of CuFe2O4 bulk catalysts
618
Preparation and characterization of CuI nanorods using Cu(dmg)2 as precursor via water-in-oil (w/o) microemulsions
619
Preparation and characterization of CuI-doped silver borovanadate superionic system
620
Preparation and characterization of CuIn0.3Al0.7Se2 thin films for tandem solar cells
621
Preparation and characterization of Cu–In–S thin films by electrodeposition
622
Preparation and characterization of CuInS2 thin films solar cells with large grain
623
Preparation and characterization of CuInSe2 nano-particles Original Research Article
624
Preparation and characterization of CuO doped Bi2O3–B2O3–BaO–ZnO glass system for transparent dielectric layer
625
Preparation and Characterization of CuO Nanocrystals
626
Preparation and characterization of CuO nanorods by thermal decomposition of CuC2O4 precursor
627
Preparation and characterization of CuO/CeO2 catalysts and their applications in low-temperature CO oxidation Original Research Article
628
Preparation and characterization of CuO/ZnO–Al2O3 catalyst washcoats with CeO2 sols for autothermal reforming of methanol in a microreactor
629
Preparation and Characterization of Curcumin Niosomal Nanoparticles via a Simple and Eco-friendly Route
630
Preparation and Characterization of Curcumin-Silver Nanoparticle and Evaluation of the Effect of Poly Ethylene Glycol and Temperature
631
Preparation and characterization of CuS hollow spheres
632
Preparation and characterization of CuZnAl catalysts by citrate gel process Original Research Article
633
Preparation and Characterization of Cyanocobalamin (Vit B12) Microemulsion Properties and Structure for Topical and Transdermal Application
634
Preparation and characterization of cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX) powder: Comparison of microscopy, dynamic light scattering and field-flow fractionation for size characterization
635
Preparation and characterization of cycloolefin polymer based on dicyclopentadiene (DCPD) and dimethanooctahydronaphthalene (DMON)
636
Preparation and characterization of d6 tungsten compounds with amino acid derivatized diimine ligands and preparation of dipeptide derivatives using peptide coupling agents
637
Preparation and characterization of DC sputtered molybdenum thin films
638
Preparation and characterization of decatungstomolybdoniobogermanic heteropoly acid H5[GeW10MoNbO40]·20H2O
639
Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization
640
Preparation and characterization of dendritic composite magnetic particles as a novel enzyme immobilization carrier
641
Preparation and characterization of dendritic silver nanoparticles
642
Preparation and characterization of dense Ce0.85Y0.15O2−δ ceramics
643
Preparation and characterization of dense nanohydroxyapatite/PLLA composites
644
Preparation and Characterization of Derivatives of Pyrimidines in two ways Clascical and Microwave
645
Preparation and characterization of deuterated polymer foams for thermal nuclear fusion targets
646
Preparation and characterization of deuterated polymer foams for thermal nuclear fusion targets
647
Preparation and Characterization of Dexamethasone Microemulsion Based on Pseudoternary Phase Diagram
648
Preparation and characterization of diethylene glycol bis(2-aminophenyl) ether-modified glassy carbon electrode Original Research Article
649
Preparation and characterization of different liposomal formulations containing P5 HER2/neu-derived peptide and evaluation of their immunological responses and antitumor effects
650
Preparation and characterization of dinuclear copper–indomethacin anti-inflammatory drugs
651
Preparation and characterization of dinuclear palladium tetraamin–thiophenolate complexes coligated by bridging acetate and acetamidate units
652
Preparation and Characterization of Diols and Polyols Based on Aminolysisof Poly (ethylene terephthalate) Wastes with Alkanolamines
653
Preparation and characterization of dip-coated γ-alumina based ceramic materials on FeCrAl foils
654
Preparation and characterization of diphenylboron cation in solution
655
Preparation and characterization of directional conducting and lower methanol permeable ultrathin membrane based on poly (vinyl alcohol) and imidazolium compounds
656
Preparation and characterization of dispersible chitosan particles with borate crosslinking and their antimicrobial and antifungal activity Original Research Article
657
Preparation and characterization of dispersive carbon-coupling ZnO photocatalysts
658
Preparation and characterization of DNA/allophane composite hydrogels
659
Preparation and characterization of domperidone solid dispersions
660
Preparation and characterization of dopamine-decorated hydrophilic carbon black
661
Preparation and characterization of doped metal-supported TiO2-layers
662
Preparation and characterization of doped sol–gel zirconia films
663
Preparation and characterization of double crosslinked hydrogel films from carboxymethylchitosan and carboxymethylcellulose
664
Preparation and Characterization of Double Shell Fe3O4 Cluster@Nonporous SiO2@Mesoporous SiO2 Nanocomposite Spheres and Investigation of their In Vitro Biocompatibility
665
Preparation and characterization of double-MF shell microPCMs used in building materials
666
Preparation and characterization of down shifting ZnS:Mn/PMMA nanocomposites for improving photovoltaic silicon solar cell efficiency
667
Preparation and Characterization of Downconversion Luminescent LaVO4: Tm3+, Yb3 and Tm3+/Yb3+Nanosheets +
668
Preparation and characterization of dual stimuli-responsive microcapsules with a superparamagnetic porous membrane and thermo-responsive gates
669
Preparation and characterization of dual-sensitive double network hydrogels with clay as a physical crosslinker
670
Preparation and characterization of duplex PEO/MoC coatings on Mg–Li alloy
671
Preparation and characterization of durable antibacterial cellulose biomaterials modified with triazine derivatives
672
Preparation and characterization of durable antibacterial cellulose biomaterials modified with triazine derivatives
673
Preparation and characterization of durable antistatic polyurethane elastomer by preirradiation grafting on its film
674
Preparation and characterization of dye-intercalated Zn–Al-layered double hydroxide and its surface modification by silica coating Original Research Article
675
Preparation and characterization of electrically conducting polypyrrole Sn(IV) phosphate cation-exchanger and its application as Mn(II) ion selective membrane electrode
676
Preparation and characterization of electrocatalyst nanoparticles for direct methanol fuel cell applications using β-D-glucose as a protection agent
677
Preparation and characterization of electrochemical and electrocatalytic behavior of a zinc pentacyanonitrosylferrate film-modified glassy carbon electrode
678
Preparation and characterization of electrochemical properties of air cathode electrode
679
Preparation and characterization of electrochemically modified electrodes containing the metal complexing moiety quinolin-8-ol anchored to the polymeric film
680
Preparation and characterization of electrodeposited Bi2S3 thin films prepared from non-aqueous media
681
Preparation and characterization of electrodeposited Bi2Se3 thin films from nonaqueous medium
682
Preparation and characterization of electrodeposited Sb2Se3 thin films from non-aqueous media Original Research Article
683
Preparation and characterization of electroless Ni–Co–P ternary alloy on fly ash cenospheres
684
Preparation and characterization of electroless Ni-Fe-P alloy films on fly ash cenospheres
685
Preparation and characterization of electroless Ni–P–Fe3O4 composite coatings and evaluation of its high temperature oxidation behaviour
686
Preparation and characterization of electromagnetic functionalized polyaniline/BaFe12O19 composites
687
Preparation and characterization of electromagnetic polyaniline/nickel plating graphite nanosheets composites through ultrasonic irradiation
688
Preparation and characterization of electrospun apigenin-loaded polycaprolactone nanofibers for wound dressing applications
689
Preparation and characterization of electrospun nanofibers of Nylon-6 doped with copper(II) chloride
690
Preparation and characterization of electrospun PLGA/gelatin nanofibers as a potential drug delivery system
691
Preparation and characterization of electrospun poly(p-phenylene oxide) membranes
692
Preparation and characterization of electrospun pullulan/montmorillonite nanofiber mats in aqueous solution
693
Preparation and characterization of electrospun pullulan/montmorillonite nanofiber mats in aqueous solution
694
Preparation and characterization of EMD from manganese cake — A byproduct of manganese nodule processing
695
Preparation and characterization of emulsifier-free core–shell interpenetrating polymer network-fluorinated polyacrylate latex particles
696
Preparation and characterization of emulsifier-free polyphenylsilsesquioxane-poly (styrene–butyl acrylate) hybrid particles
697
Preparation and characterization of enamel coating on pure titanium as a hydrogen penetration barrier
698
Preparation and Characterization of Encapsulated Tamoxifen Citrate-Magnetite Nanoparticle Via Oil in Water Emulsion Evaporation Technique
699
Preparation and characterization of encapsulation of multiple lipid carrier (MLC) using vegetable fat
700
Preparation and characterization of energetic Al-Mg mechanical alloy powders
701
Preparation and characterization of energetic materials coated superfine aluminum particles
702
Preparation and characterization of enrofloxacin-imprinted monolith prepared with crowding agents
703
Preparation and Characterization of Enset Starch (ES) Based Films: Plasticized by Glycerol and Sorbitol
704
Preparation and characterization of epoxy composites filled with functionalized nanosilica particles obtained via sol–gel process
705
Preparation and characterization of epoxy composites filled with functionalized nano-sized MCM-41 particles
706
Preparation and characterization of epoxy nanocomposites by using PEO-grafted silica particles as modifier
707
Preparation and characterization of epoxy/layered double hydroxides nanocomposites Original Research Article
708
Preparation and characterization of epoxy-silica hybrid materials by the sol-gel process
709
Preparation and characterization of Er3+-doped TeO2-based oxyhalide glasses
710
Preparation and characterization of Er3+-Yb3+-Ce3+ co-doped transparent glass ceramic containing nano Ca5(PO4)3F crystals
711
Preparation and characterization of erbium oxalate and erbium oxide nanoparticles by microemulsion technique
712
Preparation and Characterization of Estradiol Valerate Microspheres Using Biodegradable Polymers
713
Preparation and characterization of estradiol-loaded PLGA nanoparticles using homogenization-solvent diffusion method
714
Preparation and characterization of ethanol-treated silk fibroin dense membranes for biomaterials application using waste silk fibers as raw material
715
Preparation and characterization of ethyl cellulose-based core–shell microcapsules containing plant oils
716
Preparation and characterization of ethylcellulose microspheres for sustained-release of pregabalin
717
Preparation and characterization of Eu2O3 nanometer thin films by pulse ultrasonic spray pyrolysis method
718
Preparation and characterization of Eu3+-doped fluorapatite nanoparticles by a hydrothermal method
719
Preparation and characterization of Eudragit L 100-55/chitosan enteric nanoparticles containing omeprazole using general factorial design: in vitro/in vivo study
720
Preparation and characterization of EVOH/PVP membranes via thermally induced phase separation
721
Preparation and characterization of exfoliated graphite and its styrene butadiene rubber nanocomposites
722
Preparation and characterization of exfoliated polyaniline/montmorillonite nanocomposites
723
Preparation and characterization of exfoliated polystyrene/clay nanocomposites using a cationic radical initiator-MMT hybrid
724
Preparation and characterization of F doped SnO2 films and electrochromic properties of FTO/NiO films
725
Preparation and characterization of fast ionic solids in new ternary system CuI–Ag2O–PbO2
726
Preparation and characterization of Fe/Cu/Al2O3-composite granules for SO3 decomposition to assist hydrogen production Original Research Article
727
Preparation and characterization of Fe2O3/mesoporous clay composite from Nigerian local bentonite clay
728
Preparation and characterization of Fe2O3–TiO2 thin films on glass substrate for photocatalytic applications
729
Preparation and characterization of Fe3+-doped TiO2 on fly ash cenospheres for photocatalytic application
730
Preparation and characterization of Fe3O4(1 1 1) nanoparticles and thin films on Au(1 1 1)
731
Preparation and characterization of Fe3O4/graphene nanocomposite and investigation of its adsorption performance for aniline and p-chloroaniline
732
Preparation and characterization of Fe3O4/SiO2 particles for dual-particle electrophoretic display
733
Preparation and Characterization of Fe3O4/T-ZnOw Composites
734
Preparation and characterization of Fe3O4@SiO2@PMA:AS an efficient and recyclable nanocatalyst for the synthesis of 1-amidoalkyl-2-naphthols
735
Preparation and characterization of Fe–Al intermetallic layer on the surface of T91 heat-resistant steel
736
Preparation and characterization of Fe–Nb–Cu–Si–B-based nanocrystalline soft magnetic materials
737
Preparation and characterization of ferric oxyhydroxide and ferric oxide thin films by direct-hydrolysis deposition
738
Preparation and characterization of ferromagnetic shape memory alloys
739
Preparation and characterization of FexOy–TiO2 via sonochemical synthesis
740
Preparation and characterization of film of poly vinyl acetate ethylene copolymer emulsion
741
Preparation and characterization of films based on zirconium sulfophenyl phosphonate and chitosan Original Research Article
742
Preparation and Characterization of Films Using Barley and Oat beta-Glucan Extracts.
743
Preparation and characterization of fine silver powder with colloidal emulsion aphrons
744
Preparation and characterization of fine Sr2CeO4 blue phosphor powders
745
Preparation and characterization of finely dispersed drugs. 5. Ethyl 3,5-di(acetylamino)-2,4,6-triiodobenzoate
746
Preparation and characterization of first optically active rigid phthalocyanine dimers
747
Preparation and characterization of Fischer–Tropsch active Co/SiO2 catalysts Original Research Article
748
Preparation and characterization of flake-like polypyrrole/SrFe12O19 composites with different surface active agents
749
Preparation and characterization of flame retardant ABS/montmorillonite nanocomposite
750
Preparation and characterization of flexible polypyrrole nitrate films
751
Preparation and characterization of flower-like SrAl2O4:Eu2+,Dy3+ phosphors by sol-gel process
752
Preparation and characterization of fluorapatite-bioactive glass S53P4 nanocomposite
753
Preparation and characterization of fluorescent silica coated magnetic hybrid nanoparticles
754
Preparation and characterization of fluoridated hydroxyapatite coatings on HT-C/C composites
755
Preparation and characterization of fluorinated acrylate copolymer latexes by miniemulsion polymerization under microwave irradiation
756
Preparation and characterization of fluorinated poly(aryl ether oxadiazole)s anion exchange membranes based on imidazolium salts
757
Preparation and characterization of fluorine-containing acrylate copolymers by 60Co γ-ray radiation co-polymerization
758
Preparation and characterization of fluorine-containing polybenzimidazole/imidazole hybrid membranes for proton exchange membrane fuel cells
759
Preparation and characterization of fluorophenylboronic acid-functionalized monolithic columns for high affinity capture of cis-diol containing compounds
760
Preparation and characterization of fly ashes and polyaniline core/shell microspheres
761
Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent
762
Preparation and characterization of foamed polyurethane/silicone rubber/graphite nanocomposite as radio frequency wave absorbing material: The role of interfacial compatibilization
763
Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents
764
Preparation and characterization of form-stable paraffin/polyurethane composites as phase change materials for thermal energy storage
765
Preparation and characterization of forsterite (Mg2SiO4) bioceramics
766
Preparation and characterization of fouling-resistant TiO2 self-assembled nanocomposite membranes
767
Preparation and characterization of four different compositions of calcium phosphate scaffolds for bone tissue engineering
768
Preparation and characterization of freestanding SiC(Ti, B) films derived from polycarbosilane with TiN and B as additives
769
Preparation and characterization of friendly colloidal Hydroxyapatite based on natural Milk’s casein
770
Preparation and Characterization of Fuel Pellets from Corn Cob and Wheat Dust with Binder
771
Preparation and characterization of fuel pellets from woody biomass, agro-residues and their corresponding hydrochars
772
Preparation and characterization of fullerene and poly (p-methyl)phenyl methacrylate Langmuir-Blodgett films
773
Preparation and characterization of fullerene-doped low-temperature glassy carbon Original Research Article
774
Preparation and characterization of fully separated gold nanowire arrays
775
Preparation and characterization of functional carboxylic polyethersulfone membrane
776
Preparation and characterization of functional fabrics from bamboo charcoal/silver and titanium dioxide/silver composite powders and evaluation of their antibacterial efficacy
777
Preparation and characterization of galactosylated alginate–chitosan oligomer microcapsule for hepatocytes microencapsulation
778
Preparation and characterization of galactosylated chitosan coated BSA microspheres containing 5-fluorouracil
779
Preparation and characterization of gallium (oxy)nitride powders: Preliminary investigation as new gas sensor materials
780
Preparation and characterization of GaN films by radio frequency magnetron sputtering and carbonized-reaction technique
781
Preparation and characterization of GaN photonic crystal arrays by focused ion beam technology
782
Preparation and Characterization of Garnet Phosphor Nanoparticles Derived from Oxalate Coprecipitation
783
Preparation and characterization of gas separation hollow fiber membranes based on polyethersulfone-polyimide miscible blends Original Research Article
784
Preparation and characterization of gasochromic Pt/WO3 hydrogen sensor by using the Taguchi design method
785
Preparation and characterization of gasochromic switchable-mirror window with practical size
786
Preparation and Characterization of Gd3Sc2Ga3O12 Polycrystalline Material by Co-Precipitation Method
787
Preparation and characterization of gel polymer electrolytes based on methyl methacrylate–styrene copolymers
788
Preparation and characterization of gelatin/cerium(III) film
789
Preparation and characterization of gelatin/hyaluronic acid cryogels for adipose tissue engineering: In vitro and in vivo studies
790
Preparation and characterization of gelatin/SDS/NaCMC microcapsules with compact wall structure by complex coacervation
791
Preparation and characterization of gelatinized granular starches from aqueous ethanol treatments
792
Preparation and characterization of genipin cross-linked porous chitosan–collagen–gelatin scaffolds using chitosan–CO2 solution
793
Preparation and characterization of genipin-crosslinked rat acellular spinal cord scaffolds
794
Preparation and characterization of germanium oxy-sulfide GeS2–GeO2 glasses
795
Preparation and characterization of germanium oxysulfide glassy films for optics
796
Preparation and characterization of glass covered magnetic wires
797
Preparation and characterization of glass covered magnetic wires
798
Preparation and characterization of glass embedding photoluminescent CdTe nanocrystals
799
Preparation and characterization of glass-ceramic materials in the BaO–Li2O–ZrO2–SiO2 system and their dependence on treatment temperatures
800
Preparation and Characterization of Glass-Ceramic Synthesized from Soda Lime Glass and Wastewater Sludge
801
Preparation and characterization of glasses in the LiI+Li2S+GeS2+Ga2S3 system
802
Preparation and characterization of glass-like carbon/silica composites from rice hull and phenolic resin
803
Preparation and characterization of glazes from combinations of different industrial wastes
804
Preparation and characterization of glycerol plasticized (high-amylose) starch–chitosan films Original Research Article
805
Preparation and characterization of glycerol plasticized-pea starch/ZnO–carboxymethylcellulose sodium nanocomposites
806
Preparation and characterization of glycol chitin as a new thermogelling polymer for biomedical applications
807
Preparation and characterization of glycosylated maleic anhydride copolymer thin films
808
Preparation and characterization of gold-coated silver triangular platelets in nanometer scale
809
Preparation and characterization of gold-codeposited LiMn2O4 electrodes
810
Preparation and characterization of graded cathode La0.6Sr0.4Co0.2Fe0.8O3−δ
811
Preparation and characterization of graded SSC–SDC MIEC cathode for low-temperature solid oxide fuel cells
812
Preparation and characterization of gradient wettability surface depending on controlling Cu(OH)2 nanoribbon arrays growth on copper substrate
813
Preparation and characterization of graft copolymers of methyl methacrylate and poly(n-hexyl isocyanate) macromonomers
814
Preparation and characterization of grafted propane sulfonic acid polyphenylene membrane via superacid-catalyzed reaction
815
Preparation and characterization of graphene and few-layer graphene
816
Preparation and characterization of graphene and Ni-decorated graphene using flower petals as the precursor material Original Research Article
817
Preparation and Characterization of Graphene Membrane Electrode Assembly
818
Preparation and characterization of graphene nanosheets/poly(3-hexylthiophene) thermoelectric composite materials
819
Preparation and characterization of graphene paper for electromagnetic interference shielding
820
Preparation and characterization of graphene/CdS nanocomposites
821
Preparation and characterization of Graphene/Nickel Oxide nanorods composite
822
Preparation and characterization of graphite nano-platelet (GNP)/epoxy nano-composite: Mechanical, electrical and thermal properties
823
Preparation and characterization of graphite nanosheets decorated with Fe3O4 nanoparticles used in the immobilization of glucoamylase Original Research Article
824
Preparation and characterization of graphite nanosheets from ultrasonic powdering technique Original Research Article
825
Preparation and characterization of graphite oxide/polypyrrole composites Original Research Article
826
Preparation and Characterization of Graphite Powder Covered with CeO2
827
Preparation and characterization of graphite-dispersed styrene-acrylic emulsion composite coating on magnesium alloy
828
Preparation and characterization of graphite–nickel composite coatings by automatic brush plating
829
Preparation and Characterization of Groundnut Shell-Based Activated Charcoal
830
Preparation and characterization of guar gum hydrogels as carrier materials for controlled protein drug delivery
831
Preparation and characterization of guluronic acid oligosaccharides degraded by a rapid microwave irradiation method Original Research Article
832
Preparation and characterization of HA microflowers coating on AZ31 magnesium alloy by micro-arc oxidation and a solution treatment
833
Preparation and characterization of hemicellulosic derivatives containing carbamoylethyl and carboxyethyl groups Original Research Article
834
Preparation and characterization of heterogeneous deacetylated konjac glucomannan
835
Preparation and characterization of heteropolyacid/mesoporous carbon catalyst for the vapor-phase 2-propanol conversion reaction
836
Preparation and characterization of hexadecyl functionalized magnetic silica nanoparticles and its application in Rhodamine 6G removal
837
Preparation and characterization of hexanoyl chitosan/polylactide blend films
838
Preparation and Characterization of Hierarchical CdS Nanoflowers for Efficient Photocatalytic Degradation
839
Preparation and characterization of high efficiency modified activated carbon for the capture of mercury from flue gas in coal-fired power plants
840
Preparation and characterization of high electrically conductive polypyrrole/nickel plating graphite nanosheets composites
841
Preparation and characterization of high flux PES nanofiltration membrane using hydrophilic nanoparticles by phase inversion method for application in advanced wastewater treatment
842
Preparation and characterization of high ionic conducting alkaline non-woven membranes by sulfonation
843
Preparation and characterization of high loading porous crosslinked poly(vinyl alcohol) resins
844
Preparation and Characterization of High Methanol Resistance Sulfonated Poly (ether ether ketone) Membrane for DMFC Application
845
Preparation and characterization of high performance of graphene/nylon nanocomposites
846
Preparation and characterization of high performance Schiff-base liquid crystal diepoxide polymer
847
Preparation and characterization of high purity Zn-doped (La0.8Sr0.2)AlO2.9 electrolyte for intermediate temperature solid oxide fuel cells
848
Preparation and characterization of high selectivity organic–inorganic hybrid-laminated Nafion 115 membranes for DMFC
849
Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method
850
Preparation and characterization of high surface area activated carbons from co-pyrolysis product of coal-tar pitch and rosin
851
Preparation and characterization of high surface area activated carbons from co-pyrolysis product of coal-tar pitch and rosin
852
Preparation and characterization of high surface area, high porosity carbon monoliths from pyrolyzed bovine bone and their performance as supercapacitor electrodes Original Research Article
853
Preparation and characterization of high water perm-selectivity ZSM-5 membrane without organic template
854
Preparation and characterization of high-density spherical Li0.97Cr0.01FePO4/C cathode material for lithium ion batteries
855
Preparation and characterization of high-density spherical Li4Ti5O12 anode material for lithium secondary batteries
856
Preparation and characterization of high-density spherical LiCoO2 cathode material for lithium ion batteries
857
Preparation and characterization of high-density spherical LiNi0.8Co0.2O2 cathode material for lithium secondary batteries
858
Preparation and characterization of high-durability zwitterionic crosslinked proton exchange membranes
859
Preparation and characterization of high-flux T-type zeolite membranes supported on YSZ hollow fibers
860
Preparation and characterization of highly c-axis-oriented Bi4Ti3O12 thin films
861
Preparation and characterization of highly c-axis-oriented Bi4Ti3O12 thin films
862
Preparation and characterization of highly conducting and transparent Al doped CdO thin films by pulsed laser deposition
863
Preparation and characterization of highly conductive transparent films with single-walled carbon nanotubes for flexible display applications Original Research Article
864
Preparation and characterization of highly dispersed gold nanoparticles within channels of mesoporous silica
865
Preparation and characterization of highly dispersed silica-supported ceria Original Research Article
866
Preparation and characterization of highly hydrophobic poly(vinylidene fluoride) – Clay nanocomposite nanofiber membranes (PVDF–clay NNMs) for desalination using direct contact membrane distillation
867
Preparation and characterization of highly lead-loaded red plastic scintillators under low energy x-rays
868
Preparation and characterization of highly lead-loaded red plastic scintillators under low energy x-rays
869
Preparation and characterization of highly oriented NiO(200) films by a pulse ultrasonic spray pyrolysis method
870
Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications
871
Preparation and characterization of highly selective dense and hollow fiber asymmetric membranes based on BTDA-TDI/MDI co-polyimide
872
Preparation and characterization of highly transparent and colorless semi-aromatic polyimide films derived from alicyclic dianhydride and aromatic diamines
873
Preparation And Characterization Of High-Purity PZT Powders And Ceramics Made By Modified Spray-Drying Techniques
874
Preparation and characterization of high-refractive-index polymer/inorganic hybrid films containing TiO2 nanoparticles prepared by 4-aminobenzoic acid
875
Preparation and characterization of high-temperature silver thick film and its application in multilayer chip inductances
876
Preparation and characterization of hollandite thin film
877
Preparation and characterization of hollow glass microsphere reinforced poly(butylene succinate) composites
878
Preparation and characterization of hollow glass microspheres coated by CoFe2O4 nanoparticles using urea as precipitator via coprecipitation method
879
Preparation and characterization of hollow hydroxyapatite microspheres by spray drying method
880
Preparation and characterization of hollow hydroxyapatite microspheres by the centrifugal spray drying method
881
Preparation and characterization of homogeneous chitosan–polylactic acid/hydroxyapatite nanocomposite for bone tissue engineering and evaluation of its mechanical properties
882
Preparation and characterization of HPEI-GO/PES ultrafiltration membrane with antifouling and antibacterial properties
883
Preparation and characterization of humic acid cross-linked with organic bridging groups
884
Preparation and characterization of hyaluronan/collagen II microspheres under an electrostatic field system with disc electrodes
885
Preparation and characterization of hyaluronic acid-based hydrogel nanoparticles Original Research Article
886
Preparation and Characterization of Hybrid Biocomposite Based on Woven Palm-Cotton Fibers and Used Expanded Polystyrene Beads
887
Preparation and characterization of hybrid Nafion–silica membrane doped with phosphotungstic acid for high temperature operation of proton exchange membrane fuel cells
888
Preparation and characterization of hybrid nanocomposite coatings by photopolymerization and sol–gel process
889
Preparation and characterization of hybrid platinum/Prussian blue nanoparticles
890
Preparation and characterization of hybrid-silica monolithic column with mixed-mode of hydrophilic and strong anion-exchange interactions for pressurized capillary electrochromatography
891
Preparation and Characterization of Hydrogel (2-Hydroxyethyl Methacrylate, Methacrylamide) for Insulin Delivery
892
Preparation and characterization of hydrogels based on homopolymeric fractions of sodium alginate and PNIPAAm
893
Preparation and Characterization of Hydrogels from Grafting of Vinyl Pyrrolidone onto Carboxymethyl Cellulose
894
Preparation and characterization of hydrogenated carbon nitride films synthesized by dual DC-RF plasma system
895
Preparation and characterization of hydrophile nano-porous polyethersulfone membranes using synthesized poly(sulfoxide-amide) as additive in the casting solution
896
Preparation and characterization of hydrophilic organo-montmorillonites through incorporation of non-ionic polyglycerol dendrimers derived from soybean oil
897
Preparation and characterization of hydrophobic carbon-supported Pt3M (M = Fe, Co, Ni and Cr) bimetals for H/D isotope separation between hydrogen and water
898
Preparation and characterization of hydrophobic ceramic hollow fibre membrane
899
Preparation and characterization of hydrophobic magnetite microspheres by a simple solvothermal method
900
Preparation and characterization of hydrophobic polymeric films that are thromboresistant via nitric oxide release
901
Preparation and characterization of hydrophobic organic–inorganic composite thin films of PMMA/SiO2/TiO2 with low friction coefficient
902
Preparation and characterization of hydrophobically modified polyacrylamide hydrogels by grafting glycidyl methacrylate
903
Preparation and characterization of hydrotalcite-like compounds containing transition metal as a solid base catalyst for the transesterification Original Research Article
904
Preparation and Characterization Of Hydroxyapatite Coating On F75 Alloy Implant Using Pulse Laser Deposition
905
Preparation and Characterization of Hydroxyapatite Coating on Ti6Al4V Cylinders by Combination of Alkali-Heat Treatments and Biomimetic Method
906
Preparation and characterization of hydroxyapatite from eggshell
907
Preparation and characterization of hydroxyapatite reinforced with hardystonite as a novel bio-nanocomposite for tissue engineering
908
Preparation and characterization of hydroxyapatite suspensions for solid freeform fabrication
909
Preparation and characterization of hydroxyapatite/chondroitin sulfate composites by biomimetic synthesis
910
Preparation and characterization of hydroxyapatite/gelatin composite membranes for immunoisolation
911
Preparation and characterization of hydroxyapatite/titania composite coating on NiTi alloy by electrochemical deposition
912
Preparation and characterization of hydroxyapatite–forsterite–bioactive glass nanocomposite coatings for biomedical applications
913
Preparation and characterization of hydroxylated multi-walled carbon nanotubes
914
Preparation and characterization of hyperbranched polymer grafted mesoporous silica nanoparticles via self-condensing atom transfer radical vinyl polymerization
915
Preparation and characterization of hyperthin-skinned and high performances asymmetric polyethersulfone membrane for gas separation Original Research Article
916
Preparation and characterization of ibuprofen-loaded microspheres consisting of poly(3-hydroxybutyrate) and methoxy poly (ethylene glycol)-b-poly (D,L-lactide) blends or poly(3-hydroxybutyrate) and gelatin composites for controlled drug release
917
Preparation and characterization of imidazolium-functionalized poly (ether sulfone) as anion exchange membrane and ionomer for fuel cell application
918
Preparation and characterization of immobilized acid phosphatase used for an enzyme reactor: evaluation in flow-injection analysis and pre-column liquid chromatography Original Research Article
919
Preparation and characterization of immobilized constrained-geometry hafnium complexes
920
Preparation and characterization of immobilized lipase on magnetic hydrophobic microspheres
921
Preparation and characterization of imprinted monolith with metal ion as pivot
922
Preparation and characterization of improved fouling-resistant PPESK ultrafiltration membranes with amphiphilic PPESK-graft-PEG copolymers as additives
923
Preparation and characterization of in situ ionic cross-linked pectin films: Unique biodegradable polymers
924
Preparation and characterization of in situ synthesized B4C particulate reinforced nickel composite coatings by laser cladding
925
Preparation and characterization of In(I)-β″-alumina
926
Preparation and characterization of In2O3-TiO2 and V2O5/In2O3-TiO2 composite oxides for catalytic applications Original Research Article
927
Preparation and characterization of In2Se3 thin films
928
Preparation and characterization of inclusion complexes formed between baicalein and cyclodextrins
929
Preparation and characterization of inclusion complexes formed by biodegradable poly(ε-caprolactone)–poly(tetrahydrofuran)–poly(ε-caprolactone) triblock copolymer and cyclodextrins
930
Preparation and characterization of inclusion complexes of naringenin with β-cyclodextrin or its derivative
931
Preparation and characterization of indium doped CdS0.2Se0.8 thin films by spray pyrolysis
932
Preparation and characterization of indium selenide thin films from a chemical route
933
Preparation and characterization of indium tin oxide films formed by oxygen ion beam assisted deposition
934
Preparation and characterization of indium zinc oxide thin films by electron beam evaporation technique
935
Preparation and characterization of indium-doped tin oxide thin films
936
Preparation and characterization of inexpensive heterogeneous catalysts for air pollution control: Two case studies
937
Preparation and characterization of injectable calcium phosphate cement paste modified by polyethylene glycol-6000
938
Preparation and characterization of inorganic colored coating layers on lamellar mica-titania substrate
939
Preparation and characterization of inorganic hollow fiber membranes
940
Preparation and characterization of inorganic–organic trilayer core–shell polysilsesquioxane/polyacrylate/polydimethylsiloxane hybrid latex particles
941
Preparation and characterization of in-situ crosslinked pectin–gelatin hydrogels
942
Preparation and characterization of integrally skinned uncharged polyetherimide asymmetric nanofiltration membrane
943
Preparation and Characterization of Intercalation Compounds of Layered Double Hydroxides with Metallic Oxalato Complexes
944
Preparation and characterization of iodine-doped mesoporous TiO2 by hydrothermal method
945
Preparation and characterization of ion-exchange membrane using Sty/HEA/LMA terpolymer via post-sulfonation Original Research Article
946
Preparation and characterization of ionic liquid functionalized SBA-15 and its application in the synthesis of 2,3-dihydroquinazolinones
947
Preparation and characterization of ionic liquid intercalation compounds into layered zirconium phosphates
948
Preparation and characterization of ion-selective polyvinyl chloride based heterogeneous cation exchange membrane modified by magnetic iron–nickel oxide nanoparticles Original Research Article
949
Preparation and characterization of IPN composite hydrogels based on polyacrylamide and chitosan and their interaction with ionic dyes
950
Preparation and characterization of IPN hydrogels composed of chitosan and gelatin cross-linked by genipin
951
Preparation and characterization of Ir/TiC catalyst for oxygen evolution
952
Preparation and characterization of Ir-based catalysts on metallic supports for high-temperature steam reforming of methanol Original Research Article
953
Preparation and characterization of IrO2–YSZ nanocomposite electrodes by MOCVD
954
Preparation and characterization of iron oxide films by the excimer laser ablation of poly(ferric methacrylate)
955
Preparation and characterization of iron oxide films by the excimer laser ablation of poly(ferric methacrylate)
956
Preparation and characterization of iron oxide thin films by spray pyrolysis using methanolic and ethanolic solutions
957
Preparation and characterization of iron salt embedded electrodialysis Analcime-C zeolite clay composite membrane
958
Preparation and characterization of iron(III) oxide (α-Fe2O3) thin films hydrothermally
959
Preparation and characterization of iron/titanium-oxide composite particles Original Research Article
960
Preparation and characterization of iron–chromium cyanide molecular magnet nanoparticles protected by poly(vinylpyrrolidone)
961
Preparation and characterization of iron–molybdate thin films
962
Preparation and characterization of IrxPt1−xO2 anode electrocatalysts for the oxygen evolution reaction
963
Preparation and characterization of ITO films deposited on polyimide by reactive evaporation at low temperature
964
PREPARATION AND CHARACTERIZATION OF ITO-COATED COLORLESS POLYIMIDE SUBSTRATES
965
Preparation and characterization of junction-like multiwall carbon nanotubes
966
Preparation and characterization of jute- and flax-reinforced starch-based composite foams
967
Preparation and characterization of kaolin/starch foam
968
Preparation and characterization of keratin-based biocomposite hydrogels prepared by electron beam irradiation
969
Preparation and characterization of keratin–chitosan composite film
970
Preparation and characterization of kidney bean protein isolate (KPI)–chitosan (CH) composite films prepared by ultrasonic pretreatment
971
Preparation and characterization of konjac glucomannan and ethyl cellulose blend films
972
Preparation and characterization of konjac glucomannan/poly(diallydimethylammonium chloride) antibacterial blend films
973
Preparation and characterization of konjac glucomannan/poly(diallydimethylammonium chloride) antibacterial blend films
974
Preparation and characterization of Konjac glucomannan-based cation exchange resin
975
Preparation and characterization of konjac glucomannan–poly(acrylic acid) IPN hydrogels for controlled release
976
Preparation and characterization of konjac glucomannan–poly(acrylic acid) IPN hydrogels for controlled release
977
Preparation and characterization of La and Cr co-doped SrTiO3 materials for SOFC anode
978
Preparation and characterization of LA/PCL composite fibers containing beta tricalcium phosphate (β-TCP) particles
979
Preparation and characterization of La0.5Sr0.5CoO3 /Al-doped ZnO thin film heterojunctions
980
Preparation and characterization of La0.8Sr0.04Ca0.16Co0.6Fe0.4O3-δ-La0.9Sr0.1 Ga0.8Mg0.2O3 composite cathode thin film for SOFC by slurry spin coating
981
Preparation and characterization of La0.8Sr0.2Ga0.83Mg0.17O3 electrolyte by polyol method for solid oxide fuel cells
982
Preparation and Characterization of La0.8Sr0.2MnO3-δ Cathode for SOFCs Fabricated Using Azeotropic Distillation Method
983
Preparation and characterization of La0.9Sr0.1Ga0.8Mg0.2O2.85–(Li/Na)2CO3 composite electrolytes
984
Preparation and characterization of La0.9Sr0.1Ga0.8Mg0.2O3 − δ thin film on the porous cathode for SOFC
985
Preparation and characterization of La0.9Sr0.1Ga0.8Mg0.2O3-δ thin film deposited by radio frequency magnetic sputtering
986
Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells
987
Preparation and characterization of LaAlO3
988
Preparation and characterization of lactate-intercalated Co–Fe layered double hydroxides and exfoliated nanosheet film with low infrared emissivity
989
Preparation and Characterization of Lamellar Vanadyl Alkylphosphates as Catalyst Precursors for the Selective Oxidation of Butane
990
Preparation and characterization of lamellar-like Mg(OH)2 nanostructures via natural oxidation of Mg metal in formamide/water mixture
991
Preparation and characterization of lamivudine microcapsules using various cellulose polymers
992
Preparation and characterization of Langmuir and Langmuir–Blodgett films from a pyridine-terminated stilbene
993
Preparation and characterization of Langmuir–Blodgett films of 16-membered azobenzocrown ether with naphthalene residue
994
Preparation and characterization of Langmuir–Blodgett films of endohedral metallofullerene Gd@C82
995
Preparation and characterization of LaNiO3 A/F ratio-sensitive thin film by sol–gel process based on amorphous citrate precursors
996
Preparation and characterization of LaNiO3 nanocrystals
997
Preparation and Characterization of L-aspartic Acid-Tintercalated Layered Double Hydroxide
998
Preparation and characterization of LaSrAlO4 microwave dielectric ceramics
999
Preparation and characterization of lauryl methacrylate-based monolithic microbore column for reversed-phase liquid chromatography
1000
Preparation and characterization of layered LiMn1/3Ni1/3Co1/3O2 as a cathode material by an oxalate co-precipitation method
