بر اساس عنوان

1
Influence of Mulching and Some Micro-nutrients Usage on Soil Temperature, Soil Moisture, Growth and Cowpea Yield
2
Influence of Multi Stenosis on Hemodynamic Parameters in an Idealized Coronary Artery Model
3
Influence of multichance fission on fragment angular anisotropy in the 232Th(image) and 238U(image) reactions at intermediate energies Original Research Article
4
Influence of multichannel combination, parallel imaging and other reconstruction techniques on MRI noise characteristics
5
Influence of multidentate N-donor ligands on highly electrophilic zinc initiator for the ring-opening polymerization of epoxides
6
Influence of multi-depositions on the final properties of thermally evaporated TlBr films
7
Influence of multi-depositions on the final properties of thermally evaporated TlBr films
8
Influence of multifractal scaling of pore geometry on permeabilities of sedimentary rocks
9
Influence of multi-hit capability on quantitative measurement of NiPtSi thin film with laser-assisted atom probe tomography
10
Influence of Multi-hole Arrangement on Cooling Film Development
11
Influence of Multiple Coating and Heat Treatment Cycles on the Performance of a Nano-TiO2 Coating in the Protection of 316L Stainless Steel Against Corrosion under UV Illumination and Dark Conditions
12
Influence of multiple cysteines on human 3-hydroxy-3-methylglutaryl-CoA lyase activity and formation of inter-subunit adducts
13
Influence of multiple gas inlet jets on fluidized bed hydrodynamics using Particle Image Velocimetry and Digital Image Analysis
14
Influence of multiple irreversible losses on the performance of a molten carbonate fuel cell-gas turbine hybrid system
15
Influence of multiple jet cooling on the heat transfer and thermal stresses in DEMO divertor cooling finger
16
Influence of multiple mandreling and the following heating on the behavior of titanium nickelide couplings
17
Influence of multiple mandreling and the following heating on the behavior of titanium nickelide couplings
18
Influence of multiple oxide (Cr2O3/Nb2O5) addition on the sorption kinetics of MgH2
19
Influence of Multiple Repairs on the Quality of Duplex Welded Joints
20
Influence of multipurpose trees on agricultural crops in arid regions of Haryana, India
21
Influence of multi-step heat treatments in creep age forming of 7075 aluminum alloy: Optimization for springback, strength and exfoliation corrosion
22
Influence of multi-step topography on barotropic waves and consequences for numerical modeling
23
Influence of multivalent ions on power production from mixing salt and fresh water with a reverse electrodialysis system
24
Influence of Multiwall Carbon Nanotube on Polyethersulfone/ Polyvinyl Alcohol Blend Membranes
25
Influence of multiwall carbon nanotubes on the morphology, melting, crystallization and mechanical properties of polyamide 6/acrylonitrile–butadiene–styrene blends
26
Influence of multiwall carbon nanotubes on the structural and morphological features of Si–C–O ceramics derived from a hybrid polymeric precursor
27
Influence of multi-walled carbon nanotubes concentration on the properties of nanocomposites with poly(o-ethoxyaniline)
28
Influence of multi-walled carbon nanotubes on electrochemical performance of transparent graphene electrodes
29
Influence of multi-walled carbon nanotubes on the cure behavior of epoxy-imidazole system Original Research Article
30
Influence of municipal compost on temperature, water, nutrient status and the yield of maize in a temperate soil
31
INFLUENCE OF MUNICIPAL SOLID WASTE COMPOST (MSWC) ON THE GROWTH AND YIELD OF GREEN GRAM (VIGNA RADIATE (L) WILCZEK), FENUGREEK (TRIGONELLA FOENUM-GRAECUM L.) AND ON SOIL QUALITY
32
INFLUENCE OF MUNICIPAL SOLID WASTE COMPOST ON SOIL PROPERTIES AND PLANT REESTABLISHMENT IN PERI-URBAN ENVIRONMENTS
33
Influence of Murraya koenigii on experimental model of diabetes and progression of neuropathic pain
34
Influence of muscle activity on the forces in the femur: An in vivo study
35
Influence of muscle forces on femoral strain distribution
36
Influence of muscle type on physicochemical and sensory properties of foal meat
37
Influence of muscle type on rheological properties of porcine myofibrillar protein during heat-induced gelation
38
Influence of muscular contractions on the stress analysis of distal femoral interlocking nailing
39
Influence of mussel shell on As and Cr competitive and non-competitive sorption–desorption kinetics in a mine soil: stirred flow chamber experiments
40
Influence of mussels (Mytilus galloprovincialis) from polluted and non-polluted areas on some atherosclerosis indices in rats fed cholesterol
41
Influence of Mutagenesis and Viral Load on the Sustained Low-Level Replication of an RNA Virus
42
Influence of Mutation Type on Clinical Expreion of Leber Hereditary Optic Neuropathy Original Reearch Article
43
Influence of mycorrhizal associations on foliar (delta)15N values of legume and non-legume shrubs and trees in the fynbos of South Africa: Implications for estimating N2 fixation using the 15N natural abundance method
44
Influence of mycorrhizal fungi on fate of E. coli O157:H7 and Salmonella in soil and internalization into Romaine lettuce plants
45
INFLUENCE OF MYCORRHIZAL FUNGI ON PHYTOREMEDIATING POTENTIAL AND YIELD OF SUNFLOWER IN Cd AND Pb POLLUTED SOILS
46
INFLUENCE OF MYCORRHIZAL FUNGI ON PHYTOREMEDIATING POTENTIAL AND YIELD OF SUNFLOWER IN Cd AND Pb POLLUTED SOILS
47
Influence of Myocardial Infarction, Coronary Artery Bypass Surgery, and Stroke on Cognitive Impairment in Late Life
48
Influence of myocardial viability on responsiveness to cardiac resynchronization in ischemic dilated cardiomyopathy: a prospective observational cohort study
49
Influence of myosin heavy- and light chain isoforms on early postmortem glycolytic rate and pork quality
50
Influence of myosin heavy chain isoform expression and postmortem metabolism on the ATPase activity of muscle fibers
51
Influence of myosin heavy chain isoform expression and postmortem metabolism on the ATPase activity of muscle fibers
52
Influence of myosin II activity on stiffness of fibroblast cells
53
Influence of N and non-N salts on atmospheric methane oxidation by upland boreal forest and tundra soils
54
Influence of N cluster states on band dispersion in GaInNAs quantum wells
55
Influence of N fertilisation on the isolation of Acetobacter diazotrophicus and Herbaspirillum spp. from Indian sugarcane varieties
56
Influence of N fertilization rates, rainfall, and temperature on nitrate leaching from a rainfed winter wheat field in Taihu watershed
57
Influence of N on the electron transport in (Ga,In)(N,As) probed by magnetotransport under hydrostatic pressure
58
Influence of N, Ar and Si ion implantation on the passive layer and corrosion behaviour of AISI 304 and 430 stainless steels
59
Influence of N, P additions on the transfer of nickel from phytoplankton to copepods
60
Influence of N,N,N′,N′-tetraalkyl terephthalamide on isothermal crystallization kinetics and morphology evolution of polypropylene
61
Influence of N,N-dimethylformamide on one-component moisture-curing polyurethane wood adhesives
62
Influence of N. Gogol’s and M. Saltykov-Shchedrin’s Satire on Michail Bulgakov’s Prose
63
Influence of N2 concentration in a CH4/N2 dielectric barrier discharge used for CH4 conversion into H2
64
Influence of N2 flow ratio on the properties of hafnium nitride thin films prepared by DC magnetron sputtering
65
Influence of N2/Ar-flow ratio on crystal quality and electrical properties of ScAlN thin film prepared by DC reactive magnetron sputtering
66
Influence of N2/H2 plasma treatment on chemical vapor deposited TiN multilayer structures for advanced CMOS technologies
67
Influence of N2:(N2 + Ar) flow ratio and substrate temperature on the properties of zirconium nitride films prepared by reactive dc magnetron sputtering
68
Influence of N6-isopentenyladenosine (i6A) on thermal stability of RNA duplexes Original Research Article
69
Influence of Na and Ca on the emission of NOx during coal combustion
70
Influence of Na on the properties of Cu-rich prepared CuInS2 thin films and the performance of corresponding CuInS2/CdS/ZnO solar cells
71
Influence of Na+, Ca2+, Mg2+and NH4+ on the sorption behavior of Cd2+ from aqueous solutions by a Mexican zeolitic material
72
Influence of Na+, K+ and Ca2+ on mechanical and structural properties of gels from chestnut and rice flours
73
Influence of Na2S on the degradation kinetics of CCl4 in the presence of very pure iron
74
Influence of NaCI and CaCl2 on Cold-Set Gelation of Heat-denatured Whey Protein
75
Influence of NaCI Deposition on Atmospheric Corrosion of A3 Steel
76
Influence of NaCl addition on the properties of emulsions formed with commercial calcium caseinate
77
Influence of NaCl and mannitol on peroxidase activity and lipid peroxidation in Centaurea ragusina L. roots and shoots
78
Influence of NaCl and sorbitol on the stability of conformations of cytochrome c Original Research Article
79
Influence of NaCl on ice VI and ice VII melting curves up to 6 GPa, implications for large icy moons
80
Influence of NaCl on optical properties, large-strain rheology and water holding capacity of heat-induced whey protein isolate gels
81
Influence of NaCl reduction and replacement on the growth of Lactobacillus sakei in broth, cooked ham and white sauce
82
Influence of NaCl, Na2SO4 and O2 on power generation from microbial fuel cells with non-catalyzed carbon electrodes and natural inocula
83
Influence of NaCl-CaCl2 on Decomposing REPO4 with CaO
84
Influence of NaCl-salinity on Pb-uptake behavior and growth of River Red gum tree (Eucalyptus camaldulensis Dehnh.)
85
Influence of NaF concentration on fluorine-containing hydroxyapatite coating on carbon/carbon composites
86
Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC
87
Influence of Na-humate on electric surface properties and stability of γ-Al2O3 dispersions
88
Influence of Naineris laevigata (Polychaeta: Orbiniidae) on vertical grain size distribution, and dinoflagellate resting stages in the sediment
89
Influence of naked barley cultivar with normal, amylose-rich or amylopectin-rich starch and enzyme supplementation on digestibility and piglet performance
90
Influence of n-alkanes and petroleum on fatty acid composition of a hydrocarbonoclastic bacterium: Marinobacter hydrocarbonoclasticus strain 617
91
Influence of nandrolone decanoate administration on serum lipids and liver enzymes in rats
92
Influence of nano- and micro-filler proportions on the optical property stability of experimental dental resin composites
93
INFLUENCE OF NANO SILICA ON PROPERTIES AND MICROSTRUCTURE OF HIGH ALUMINA ULTRA-LOW CEMENT REFRACTORY CASTABLES
94
Influence of nano-Al2O3 particles on the microstructure and wear resistance of the nickel-based alloy coating deposited by plasma transferred arc overlay welding
95
Influence of nano-aluminum filler on the microstructure of SiOC ceramics
96
Influence of nanobubbles on molecular binding on gold surfaces
97
Influence of Nanoceramics on the Properties of Polytetrafluoroethylene
98
Influence of Nano-Ceria Sol-Gel Coating on Oxidation Behavior of Chromium at 1 000°C Original Research Article
99
Influence of nano-clay compounding on thermo-oxidative stability and mechanical properties of a thermoset polymer system
100
Influence of nanoclay on adhesion of EPDM vulcanizate
101
Influence of nano-confinement on the thermodynamics and dehydrogenation kinetics of metal hydrides
102
Influence of nanocrystalline HZSM-5 external surface on the catalytic cracking of polyolefins
103
Influence of nanocrystalline Ni–Ti reaction agent on self-propagating high-temperature synthesized porous NiTi
104
Influence of nanocrystalline structure of surface on boron gettering from silicon
105
Influence of nanocrystals on the energy levels and luminescent properties of the polymer matrix in conjugated polymer–dielectric nanocomposites
106
Influence of Nanocurcumin and Photodynamic Therapy Using Nanocurcumin in Treatment of Rat Tongue Oral Squamous Cell Carcinoma Through Histological Examination and Gene Expression of BCL2 and Caspase-3
107
Influence of nanodispersed hydrotalcite on polypropylene photooxidation
108
Influence of nanoenvironment on luminescence of Eu3+activated SnO2 nanocrystals
109
Influence of nanofillers on the deformation process in layered silicate/polyamide-12 nanocomposites
110
Influence of nanofillers on the thermal and mechanical behavior of DGEBA-based adhesives for bonded-in timber connections
111
Influence of nanofluid on heat transfer in a loop heat pipe
112
Influence of nanofluid on turbulent forced convective flow in a channel with detached rib-arrays
113
Influence of nanofluids and rotation on helically coiled tube heat exchanger performance
114
Influence of nanofluids on parallel flow square microchannel heat exchanger performance
115
Influence of nanofluids on the operation characteristics of small capillary pumped loop
116
Influence of nanoinclusions on scattering of holes and phonons and transport coefficients in BixSb1−xTe3 bulk nanostructures
117
Influence of nano-inclusions’ grain boundaries on crack propagation modes in materials
118
Influence of nanoliposomes incorporation on properties of film forming dispersions and films based on corn starch and sodium caseinate
119
Influence of nanomaterials on properties of latent heat solar thermal energy storage materials – A review
120
Influence of nanometer lanthanum fluoride on friction and wear behaviors of bonded molybdenum disulfide solid lubricating films
121
Influence of nanometer scale film structure of ZDDP tribofilm on Its mechanical properties: A computational chemistry study
122
Influence of nanometer-size interface roughness on light transmission in polyfluorene waveguides studied by amplified spontaneous emission measurements
123
Influence of nanometer-size interface roughness on light transmission in polyfluorene waveguides studied by amplified spontaneous emission measurements
124
Influence of nanometre-sized notch and water on the fracture behaviour of single crystal silicon microelements
125
Influence of Nanometric Ceria Coating on Oxidation Behavior of Chromium at 900 °C
126
Influence of nanoparticle addition to Winsor surfactant microemulsion systems
127
Influence of nanoparticle reinforcements on the strengthening mechanisms of an ultrafine-grained dual phase steel containing titanium
128
Influence of nanoparticle shape factor on convective heat transfer and energetic performance of water-based SiO2 and ZnO nanofluids
129
Influence of nanoparticle surface chemistry and size on supercritical carbon dioxide processed nanocomposite foam morphology
130
Influence of nanoparticle–polymer interactions on the apparent migration behaviour of carbon nanotubes in an immiscible polymer blend
131
Influence of nanoparticles and polymer branching on the dewetting of polymer films
132
Influence of nanoparticles dispersion in POE oils on lubricity and R134a solubility
133
Influence of nanoparticles on boiling heat transfer
134
Influence of nanoparticles on elastic and optical properties of a polymeric matrix: Hypersonic studies on ethylene–vinyl alcohol copolymer–titania nanocomposites
135
Influence of nanoparticles on reducing and enhancing evaporation mass transfer and its efficiency
136
Influence of Nanoparticles Phenomena on the Peristaltic Flow of Pseudoplastic Fluid in an Inclined Asymmetric Channel with Different Wave Forms
137
Influence of nanopatterns on endothelial cell adhesion: Enhanced cell retention under shear stress
138
Influence of nanoporous alumina membranes on long-term osteoblast response
139
Influence of nanopowder characteristics on dispersion property of slurries
140
Influence of nanopowder particle size on competition and growth of different crystallographic phases during temperature cycling Original Research Article
141
Influence of nanoprecipitates on the creep strength and ductility of a Fe–Ni–Al alloy
142
Influence of Nano-Priming on Festuca ovina Seed Germination and Early Seedling Traits under Drought Stress, in Laboratory Condition
143
Influence of nano-reinforcements on the mechanical properties and microstructure of titanium matrix composites
144
Influence of nanoscale topography on the hydrophobicity of fluoro-based polymer thin films
145
Influence of nanoscopic micellar confinements on spectroscopic probing and rotational dynamics of an antioxidative naphthalimide derivative
146
Influence of nano-silica agglomeration on fresh properties of cement pastes
147
Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials
148
Influence of nanosilica and a polycarboxylate ether superplasticizer on the performance of lime mortars
149
Influence of Nano-silica and Polypropylene Fibers on Bond Strength of Reinforcement and Structural Lightweight Concrete
150
Influence of Nano-Silica and Silica Fume in the Steel Corrosion Embedded in Concrete
151
Influence of Nano-Silica on the properties of recycled aggregate concrete
152
Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume
153
Influence of nano-SiO2 on dilational viscoelasticity of liquid/air interface of cetyltrimethyl ammonium bromide
154
Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes
155
Influence of nanosized inclusions on the room temperature thermoelectrical properties of a p-type bismuth–tellurium–antimony alloy Original Research Article
156
Influence of nanosized Ni(OH)2 addition on the electrochemical performance of nickel hydroxide electrode
157
Influence of nanosized SiC particle on the fracture toughness of ZrB2-based nanocomposite ceramic
158
Influence of nanosized silica particles on the rheological behaviour of the lyotropic hexagonal phase of Glucopone surfactant
159
Influence of nanostructural environment and fluid flow on osteoblast-like cell behavior: A model for cell-mechanics studies
160
Influence of nanostructure on electrical and mechanical properties for Cu implanted PET
161
Influence of nanostructure on light gas separations in cross-linked lyotropic liquid crystal membranes
162
Influence of nanostructured CVD diamond coatings on dust emission and machinability of SiC particle-reinforced metal matrix composite
163
Influence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells
164
Influence of nanostructured ZrO2 additions on the wear resistance of Ni-based alloy coatings deposited by APS process
165
Influence of nanotube characteristics on electrical and thermal properties of MWCNT/polyamide 6,6 composites prepared by melt mixing Original Research Article
166
Influence of nano-WC–12Co powder addition in WC–10Co–4Cr AC-HVAF sprayed coatings on wear and erosion behaviour
167
Influence of nano-ZrO2 additive on the bending strength and fracture toughness of fluoro-silicic mica glass–ceramics
168
Influence of nano-ZrO2 on the mechanical and thermal properties of high temperature cementitious thermal energy storage materials
169
Influence of NaOCl irrigation and water-storage on degradation and microstructure of resin–dentin interface
170
Influence of NaOH and Ni catalysts on hydrogen production from the supercritical water gasification of dewatered sewage sludge
171
Influence of NaOH on the formation and morphology of Bi2Te3 nanostructures in a solvothermal process: From hexagonal nanoplates to nanorings
172
Influence of NaOH solution on the synthesis of fly ash geopolymer
173
Influence of Narrative Journalism through Storytelling
174
Influence of narrowband ultraviolet-B phototherapy on plasma concentration of matrix metalloproteinase-12 in psoriatic patients
175
Influence of natamycin loading methods on the physical characteristics of alginate active films
176
Influence of native conduction status on clinical results with right ventricular outflow tract pacing
177
Influence of native lactic acid bacteria on the microbiological, biochemical and sensory profiles of Serra da Estrela cheese
178
Influence of native starchʹs properties on starch nanocrystals thermal properties
179
Influence of Native Video Advertisement Duration and Key Elements on Advertising Effectiveness in Mobile Feeds
180
Influence of natural aging on the precipitation hardening of an AlMgSi alloy
181
Influence of natural and accelerated weathering on various formulations of linear low density polyethylene (LLDPE) films
182
Influence of natural and anthropogenic carbon dioxide sequestration on global warming
183
Influence of natural and anthropogenic carbon dioxide sequestration on global warming
184
Influence of natural and anthropogenic emissions on aerosol optical properties over a tropical urban site — A study using sky radiometer and satellite data
185
Influence of natural and synthetic metalloproteinase inhibitors on bonding durability of an etch-and-rinse adhesive to dentin
186
Influence of Natural Biomaterials on the Elastic Properties of Starch-Derived Films: An Optimization Study
187
Influence of natural coarse aggregate size, mineralogy and water content on the permeability of structural concrete
188
INFLUENCE OF NATURAL CONDITIONS ON SOME BIOLOGICAL ASPECTS OF Trichogramma evanescens (WESTWOOD) IN COMPARISON WITH LABORATORY REARING CONDITIONS
189
Influence of natural convection during upward directional solidification: A comparison between in situ X-ray radiography and direct simulation of the grain structure Original Research Article
190
Influence of natural convection on forced horizontal flow in saturated porous media for aquifer thermal energy storage
191
Influence of natural convection on the melting of ice block surrounded by water on all sides
192
Influence of natural convection on the parameters of thermal explosion in the horizontal cylinder
193
Influence of natural dissolved organic carbon on the bioavailability of mercury to a freshwater alga
194
Influence of natural essential oils and their by-products as nitrification retarders in regulating nitrogen utilization for Japanese mint in sandy loam soils of subtropical central India
195
Influence of natural events on the concentration and composition of atmospheric particulate matter
196
Influence of natural extracts on the shelf life of modified atmosphere-packaged pork patties
197
Influence of Natural Humectants on Rheological Properties and Staling of Bread
198
Influence of natural magnesium sources on the in vitro fermentation and protozoan population in the rumen fluid collected from sheep
199
Influence of natural organic matter on the bioavailability and preservation of organic phosphorus in lake sediments
200
Influence of natural organic matter on the deposition kinetics of extracellular polymeric substances (EPS) on silica
201
Influence of natural organic matter on the morphology of corroding lead surfaces and behavior of lead-containing particles
202
Influence of natural organic matter on the screening of pharmaceuticals in water by using liquid chromatography with full scan mass spectrometry Original Research Article
203
Influence of natural organic matter on the solid-phase extraction of organic micropollutants: Application to the water-extract from highly contaminated river sediment
204
Influence of natural pozzolan, colemanite ore waste, bottom ash, and fly ash on the properties of Portland cement
205
Influence of natural pozzolan, silica fume and limestone fine on strength, acid resistance and microstructure of mortar
206
Influence of natural radioactive aerosols on artificial radioactivity detection in the Spanish surveillance networks
207
Influence of Natural Sources of Biologically Active Substances on Livestock and Poultry Reproduction
208
Influence of natural time-dependent variations of electrical conductivity on DC resistivity measurements
209
Influence of Natural Variation on flow Behavior of Wormy Compost
210
Influence of natural zeolite on nitrogen dynamics in soil
211
Influence of natural zeolitic tuff and organozeolites surface charge on sorption of ionizable fumonisin B1
212
Influence of Natural, Electrically Neutral Lipids on the Potentiometric Responses of CationSelective Polymeric Membrane Electrodes
213
Influence of naturally acid-soluble proteins from beans (Phaseolus vulgaris L.) on in vitro digestibility determination
214
Influence of naturally unilateral cryptorchidism on the histomorphometry of the testes and daily sperm production in West African Dwarf goats
215
Influence of nature of anion in cationic polymethine dye on photoconductivity of amorphous molecular semiconductors based on poly-N-epoxypropylcarbazole
216
Influence of nature of precursors on the formation and structure of Cu–Ni–Cr mixed oxides from layered double hydroxides Original Research Article
217
Influence of Nb addition on the particle coarsening and microstructure evolution in a Ti-containing steel weld HAZ
218
Influence of Nb concentration in the α-matrix on the corrosion behavior of Zr–xNb binary alloys
219
Influence of Nb content on the corrosion resistance and saturation magnetic density of FeCuNbSiB alloys
220
Influence of Nb dopant on the structural and optical properties of nanocrystalline TiO2 thin films
221
Influence of Nb on Microstructure and Property of Low-Carbon Mn-Series Air-Cooled Bainitic Steel Original Research Article
222
Influence of Nb on the first stage of crystallization in Fe86−xNbxB14 amorphous alloys
223
Influence of Nb on the first stage of crystallization in Fe86−xNbxB14 amorphous alloys
224
Influence of Nb on the first stage of crystallization in Fe86−xNbxB14 amorphous alloys
225
Influence of Nb, Ta and Ti on microstructure and high-temperature strength of precipitation-hardened Pt-base alloys
226
Influence of Nb, V and Ti on peak strain of deformed austenite in Mo-based micro-alloyed steels
227
Influence of Nb2O5 additive on the densification and microstructural evolution of fine alumina powders
228
Influence of Nb2O5 additive on the densification and microstructural evolution of fine alumina powders
229
Influence of Nb2O5 on the structure, optical and electrical properties of alkaline borate glasses
230
Influence of Nb5+ and Sb3+ dopants on the defect profile, PTCR effect and GBBL characteristics of BaTiO3 ceramics
231
Influence of Nd2O3 on the thermal and dielectric properties of Pb-based lead borosilicate glasses
232
Influence of Nd3+ ions on TL characteristics of Li2O-MO-B2O3 (MO 5 ZnO, CaO, CdO) glass system
233
Influence of Nd3+ substitution on permeability spectrum of Zn–Mg ferrite
234
Influence of N-dodecyl-N,N-dimethylamine N-oxide on the activity of sarcoplasmic reticulum Ca2+-transporting ATPase reconstituted into diacylphosphatidylcholine vesicles: Effects of bilayer physical parameters Original Research Article
235
Influence of N-doped TiO2 on lithium ion conductivity of porous polymeric electrolyte membrane containing LiClO4
236
Influence of N-doping on the structural and photoluminescence properties of graphene oxide films Original Research Article
237
Influence of near-bottom environmental conditions on the structure of bathyal macrobenthic crustacean assemblages from the Capbreton canyon (Bay of Biscay, NE Atlantic)
238
Influence of near-bottom re-suspended sediment on benthic light availability
239
Influence of near-source volcano topography on the acoustic wavefield and implication for source modeling
240
Influence of near-wall modelling on boiling flow simulation Original Research Article
241
Influence of nebulizer design and aerosol impact bead on analytical sensitivities of inductively coupled plasma mass spectrometry
242
Influence of nebulizer design and aerosol impact bead on analytical sensitivities of inductively coupled plasma mass spectrometry
243
Influence of necropsy on clinical practice
244
Influence of needle-shaped drug particles on the solid lipid extrusion process
245
Influence of negative bias voltage and deposition temperature on microstructure and properties of superhard TiB2 coatings deposited by high power impulse magnetron sputtering
246
Influence of Negative Calorie Foods on Atherogenic Indices in Overweight Women
247
Influence of negative childhood experiences on psychological functioning, social support, and parenting for mothers recovering from addiction
248
Influence of negative ion element impurities on laser induced damage threshold of HfO2 thin film
249
Influence of negative ion resputtering on Al-doped ZnO thin films prepared by mid-frequency magnetron sputtering
250
Influence of negative ions (F−, Cl−, I− and S2−) doping on scintillation properties of PbWO4 crystals
251
Influence of negative ions (F−, Cl−, I− and S2−) doping on scintillation properties of PbWO4 crystals
252
Influence of negative metal ion bombardment on the properties of ITO/PET films deposited by dc magnetron sputtering
253
Influence of negative pressure on thermoelectric properties of Sb2Te3
254
Influence of negative substrate bias voltage on the impurity concentrations in Zr films
255
Influence of negative- U centers on the temperature dependence of the carrier concentration in the normal HTSC phase
256
Influence of negative voltage on the structure and properties of DLC films deposited on NiTi alloys by PBII
257
Influence of nematodes and earthworms on the emissions of soil trace gases (CO2, N2O)
258
Influence of neodymium addition on microstructure, tensile properties and fracture behavior of cast Al-Mg2Si metal matrix composite
259
Influence of neodymium and lanthanum doping in the pyroelectric properties of strontium barium niobate (SBN) thin films
260
Influence of neodymium on high cycle fatigue behavior of die cast AZ91D magnesium alloy
261
Influence of nested groundwater systems on reduction–oxidation and alkalinity gradients with implications for plant nutrient availability in four New York fens
262
Influence of network bond percolation on the thermal, mechanical, electrical and optical properties of high and low-k a-SiC:H thin films
263
Influence of neutral amine ligands on the network assembly of lead(II) 4-sulfobenzoate complexes
264
Influence of neutral transport on ion chemistry uncertainties in Titan ionosphere
265
Influence of neutron irradiation on CuNiCrSi alloy pre-implanted with helium
266
Influence of neutron irradiation on holmium acetylacetonate loaded poly( -lactic acid) microspheres
267
Influence of neutron irradiation on the strength characteristics of lithium ceramic pellets for fusion reactor blankets
268
Influence of neutrons and γ-rays in the Fréjus underground laboratory on the NEMO experiment
269
Influence of neutrons and γ-rays in the Fréjus underground laboratory on the NEMO experiment
270
Influence of neutrons on signal fluctuations for APD structures
271
Influence of neutrons on signal fluctuations for APD structures
272
Influence of new generation fungicides on Saccharomyces cerevisiae growth, grape must fermentation and aroma biosynthesis
273
Influence of newspaper reporting on adolescents’ attitudes toward people with mental illness
274
Influence of N-fertilization and Fungicide Strategies on Fusarium Head Blight Severity and Mycotoxin Content in Winter Wheat
275
Influence of n-GaAs/i-AlGaAs heterostructure interfaces on the electrical properties of the n-GaAs channel layer
276
Influence of n-GaAs/i-AlGaAs heterostructure interfaces on the electrical properties of the n-GaAs channel layer
277
Influence of N–H…O and O–H…O hydrogen bonds on the 17O, 15N and 13C chemical shielding tensors in crystalline acetaminophen: A density functional theory study Original Research Article
278
Influence of NH3 gas for GaN epilayer on β-Ga2O3 substrate by nitridation
279
Influence of NH3/Ar plasma irradiation on physical and photocatalytic properties of TiO2 nanopowder
280
Influence of NHn+ beam bombarding energy on structural characterization and cell attachment of CNx coating
281
Influence of Ni and Co doping on the stability of the ErMnO3 perovskites processed by mechanochemical synthesis
282
Influence of Ni Deposition and Subsequent N+ Ion Implantation at Different Implantation Energies on NanoStructure and Corrosion Behavior of 316 Stainless Steels
283
Influence of Ni deposition and subsequent N+ ion implantation at different substrate temperatures on nano-structure and corrosion behaviour of type 316 and 304 stainless steels
284
Influence of Ni doping on phase transformation and optical properties of TiO2 films deposited on quartz substrates by sol–gel process
285
Influence of Ni doping on the properties of perovskite molybdates SrMo1−xNixO3 (0.02≤x≤0.08)
286
Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn–3.8Ag–0.7Cu lead-free solder and copper substrate
287
Influence of Ni on martensitic phase transformations in NiTi shape memory alloys Original Research Article
288
Influence of Ni or Mn on hydrogen absorption–desorption performance of V–Ti–Cr–Fe alloys
289
Influence of Ni species on the structural evolution of Cu/SiO2 catalyst for the chemoselective hydrogenation of dimethyl oxalate
290
Influence of Ni substitution on redox properties of In2(1−x) Ni2xTiO5−δ oxides
291
Influence of Ni/SiO2 catalyst preparation methods on hydrogen production from the pyrolysis/reforming of refuse derived fuel
292
Influence of Ni2+ and Mg2+ on the growth and activity of Cu2+-adapted Thiobacillus ferrooxidans
293
Influence of Ni2+ concentration and deposition potential on the characterization of thin electrodeposited Zn–Ni–Co coatings
294
Influence of Ni2+ concentration on biohydrogen production
295
Influence of niacin on in vitro ruminal fermentation and microbial synthesis depending on dietary factors
296
Influence of NICE guidelines on removal of third molars in a region of the UK
297
Influence of nickel coating on the interfacial bonding characteristics of carbon nanotube–aluminum composites
298
Influence of nickel content on machinability of a hot-work tool steel in prehardened condition
299
Influence of nickel content on the chemical bonding character of LiMn2−xNixO4 spinel oxides
300
Influence of nickel content on the electrochemical behavior of Finemet type amorphous and nanocrystalline alloys
301
Influence of nickel crystal domain size on the behaviour of Ni and NiCu catalysts for the methane decomposition reaction Original Research Article
302
Influence of nickel ion release on leukocyte activation: a study with coated and non-coated NiTi shape memory alloys
303
Influence of nickel on cathode process of zinc electrowinning
304
Influence of nickel on mechanical and slurry erosive wear behaviour of permanent moulded toughened austempered ductile iron
305
Influence of nickel on the susceptibility to corrosion fatigue of duplex stainless steel welds
306
Influence of nickel on the toughness of lean duplex stainless steel welds
307
Influence of nickel oxide nanolayer and doping in organic light-emitting devices
308
Influence of nickel oxide on carbon dioxide adsorption behaviors of activated carbons
309
Influence of nickel–phosphorus surface roughness on wettability and pores formation in solder joints for high power electronic applications
310
Influence of Ni–Cr substitution on the magnetic and electric properties of magnesium ferrite nanomaterials
311
Influence of NiCr/Au electrodes and multilayer thickness on the electrical properties of PANI/PVS ultrathin film grown by Lbl deposition
312
Influence of Night Rainfall on Stopping Sight Distance on Dark Roadways
313
Influence of Nighttime Blood Pressure on Left Atrial Size in Uncomplicated Arterial Systemic Hypertension
314
Influence of NiO anode buffer layer prepared by solution on performance of bulk-heterojunction solar cells
315
Influence of NiO on phase stabilization in 6 mol% yttria-stabilized zirconia
316
Influence of NiO on phase stabilization in 6 mol% yttria-stabilized zirconia
317
Influence of NiO on phase transformations and optical properties of ZnO–Al2O3–SiO2 glass-ceramics nucleated by TiO2 and ZrO2. Part I. Influence of NiO on phase transformations of ZnO–Al2O3–SiO2 glass-ceramics nucleated by TiO2 and ZrO2
318
Influence of NiO on phase transformations and optical properties of ZnO–Al2O3–SiO2 glass–ceramics nucleated by TiO2 and ZrO2. Part II. Optical absorption and luminescence
319
Influence of niobium and titanium introduction on optical and physical properties of silicate glasses
320
Influence of niobium doping on the electrical properties of 0.58Pb(Sc1/2Nb1/2)O3–0.42PbTiO3 single crystal
321
Influence of niobium ion implantation on the microstructure, mechanical and tribological properties of TiAlN/CrN nano-multilayer coatings
322
Influence of niobium ion implantation on the oxidation behaviour of TiAl under thermal cycle conditions
323
Influence of niobium ion implantation on the oxidation behaviour of TiAl under thermal cycle conditions
324
Influence of niobium microalloying on rotating bending fatigue properties of case carburized steels
325
Influence of niobium solutes on the mechanical behavior of nickel during hot working
326
Influence of Ni–P coating on fatigue life of an Al2O3f/Al composite wire
327
Influence of nitrapyrin on N2O losses from soil receiving fall-applied anhydrous ammonia
328
Influence of nitrate on manganese removing microbial consortia from sand filters
329
Influence of nitric acid concentration on the characteristics of active carbons obtained from a mineral coal
330
Influence of nitric acid vapor on cloud particle formation at low temperatures in troposphere
331
Influence of Nitric Oxide in the Central Amygdala on the Acquisition and Expression of Morphine-Induced Place Preference in Morphine Sensitized Rats
332
Influence of nitric oxide on neurogenic contraction and relaxation of the human gastroepiploic artery
333
Influence of nitric oxide on the intracellular reduced glutathione pool: different cellular capacities and strategies to encounter nitric oxide–mediated stress
334
Influence of nitridation on surface microstructure and properties of graded cemented carbides with Co and Ni binders
335
Influence of nitridation time on the morphology of GaN nanorods synthesized by nitriding Ga2O3/ZnO films
336
Influence of nitriding gases on the growth of boron nitride nanotubes
337
INFLUENCE OF NITRIDING ON MICROSTRUCTURE AND FATIGUE BEHAVIOUR OF A SOLUTE-RICH BETA TITANIUM ALLOY
338
Influence of nitriding on the oxidation behaviour of titanium alloys at 700 °C
339
Influence of nitriding parameters on the tribological properties and the adhesion of Ti- and Cr-based multilayer designs
340
Influence of nitrification inhibitors on nitrification and nitrous oxide (N2O) emission from a clay loam soil fertilized with urea
341
Influence of nitrification inhibitors on nitrification and nitrous oxide (N2O) emission from a clay loam soil fertilized with urea
342
Influence of nitrification inhibitors on yields of arable crops: A meta-analysis of recent studies in Germany
343
Influence of nitrilotriacetic acid (NTA) on the early development of Paracentrotus lividus LMK at different thermo-saline combinations
344
Influence of nitrite accumulation in association with seasonal patterns and mineralization of soil nitrogen in a semi-arid pine forest
345
Influence of nitrite accumulation in association with seasonal patterns and mineralization of soil nitrogen in a semi-arid pine forest
346
Influence of nitrogen alloying on properties of Fe318Cr312Mn3XN austenitic stainless steels
347
Influence of nitrogen and carbon sources on the production of ochratoxin A by ochratoxigenic strains of Aspergillus spp. isolated from grapes
348
Influence of Nitrogen and Heat Input on Weld Metal of Gas Tungsten Arc Welded High Nitrogen Steel Original Research Article
349
Influence of Nitrogen and Seed Biopriming with Plant Growth Promoting Rhizobacteria (PGPR) on Yield and Agronomic Characteristics of Red Lentil
350
INFLUENCE OF NITROGEN AND SULFUR ON WEEDS DENSITY AND PHENOLOGY OF WHEAT AND TRITICALE
351
INFLUENCE OF NITROGEN APPLICATION RATE AND METEOROLOGICAL CONDITIONS ON β-GLUCAN CONTENT IN NAKED AND HUSKED OAT GRAIN
352
Influence of nitrogen background pressure on structure of niobium nitride films grown by pulsed laser deposition
353
Influence of nitrogen chemical states on photocatalytic activities of nitrogen-doped TiO2 nanoparticles under visible light
354
Influence of nitrogen compounds on deep hydrodesulfurization of 4,6-dimethyldibenzothiophene over Al2O3- and MCM-41-supported Co-Mo sulfide catalysts
355
Influence of nitrogen content on the acid-base properties of aluminophosphate oxynitrides Original Research Article
356
Influence of nitrogen content on the structural, electrical and mechanical properties of CrNx thin films
357
Influence of nitrogen content on the structural, mechanical and electrical properties of TiN thin films
358
Influence of nitrogen doping on carbon nanotubes towards the structure, composition and oxygen reduction reaction
359
Influence of nitrogen doping on the adsorption and reduction of nitric oxide by activated carbons
360
Influence of nitrogen fertiliser application and timing on greenhouse gas emissions from a lychee (Litchi chinensis) orchard in humid subtropical Australia
361
INFLUENCE OF NITROGEN FERTILISER ON WINTER WHEAT WHOLEMEAL RHEOLOGICAL PROPERTIES
362
Influence of nitrogen fertilization and stage of maturity of mottgrass (Pennisetum purpureum) on its composition, dry matter intake, ruminal characteristics and digestion kinetics in cannulated buffalo bulls
363
INFLUENCE OF NITROGEN FERTILIZATION LEVELS ON GRAIN YIELD AND ITS COMPONENTS IN BARLEY (Hordeum vulgare L.)
364
Influence of nitrogen fertilization on K+, Mg2+ and Ca2+ concentrations and on its bioindicators in roots and leaves of green bean plants
365
Influence of Nitrogen Fertilization on Multi-Cut Forage Sorghum-Sudangrass Yield and Nitrogen Use
366
Influence of nitrogen fertilization on mycotoxin contamination of maize kernels
367
Influence of nitrogen fertilization on physical and chemical properties of fatty acid methyl esters from Brassica napus oil
368
Influence of nitrogen fertilization on the nutritional value of high-lysine barley determined in growing pigs
369
Influence of nitrogen fertilizer and cattle manure on the vegetative growth and tuber production of potato
370
Influence of Nitrogen Fertilizer and Vermicompost Application on Flower Yield and Essential Oil of Chamomile (Matricaria Chamomile L.)
371
Influence of nitrogen fertilizers on protein productivity of vetch-wheat grain under different water supply conditions
372
Influence of nitrogen fertilizers on protein productivity of vetch-wheat grain under different water supply conditions
373
Influence of nitrogen flow rate on microstructural and nanomechanical properties of Zr–N thin films prepared by pulsed DC magnetron sputtering
374
Influence of nitrogen form on yield and nitrate content of subirrigated early potato
375
Influence of nitrogen implantation on the high temperature oxidation of titanium-base alloys
376
Influence of nitrogen impurities on the population of plasma species in atmospheric-pressure helium microwave plasmas
377
Influence of nitrogen impurities on the population of plasma species in atmospheric-pressure helium microwave plasmas
378
Influence of nitrogen incorporation in ultrathin SiO on the 2 structure and electronic states of the SiO rSi 100/ interface
379
Influence of nitrogen incorporation on structural, electronic and magnetic properties of Ga1−xMnxAs
380
Influence of nitrogen ion implantation fluences on surface structure and tribological properties of SiC ceramics in water-lubrication
381
Influence of Nitrogen Ion Implantation on the Structure and Corrosion Resistance of Stainless Steel Substrates Coated with Ni Nanolayer
382
Influence of nitrogen management on sweet corn growth, canned yield, and soil properties under various irrigation regimes and tillage systems
383
Influence of nitrogen on atrazine and 2, 4 dichlorophenoxyacetic acid mineralization in blackwater and redwater forested wetland soils
384
Influence of nitrogen on carbon arc plasma and formation of fullerenes
385
Influence of nitrogen on cellulose and lignin mineralization in blackwater and redwater forested wetland soils
386
Influence of nitrogen on Indian mustard grown underdifferent levels of stored soil moisture
387
INFLUENCE OF NITROGEN ON POTATO PRODUCTIVITY AND NUTRIENT USE EFFICIENCY
388
Influence of nitrogen on the catalytic behaviour of Pt/γ-Al2O3 catalyst in glycerol reforming process
389
Influence of nitrogen on the microstructure and mechanical properties of Ti–48Al alloy
390
Influence of nitrogen on the production of hypericins by St. John’s wort
391
Influence of nitrogen on the structure and mechanical properties of r.f.-sputtered Cr–B–N thin films
392
Influence of nitrogen overpressure on the nitridation, densification and formation of β-SiAlONs produced by silicothermal reduction
393
Influence of Nitrogen Rate and Form on Quality of Putting Greens Cohabited by Creeping Bentgrass and Annual Bluegrass
394
Influence of nitrogen rates and harvesting time on growth performance of Eclipta alba grown on mineral soil
395
Influence of nitrogen resonant states on the electronic structure of GaNxAs1−x
396
Influence of Nitrogen Source for Streptomyces SUK 02 Growth and its Antifungal Activity
397
Influence of nitrogen source on chitosan production carried out by Absidia coerulea CTCC AF 93105
398
Influence of nitrogen sources on biomass productivity of microalgae Scenedesmus bijugatus
399
Influence of nitrogen sources on ethanol fermentation in an integrated ethanol–methane fermentation system
400
Influence of Nitrogen Status on the Bioconcentration of Hydrophobic Organic Compounds to Selenastrum capricornutum
401
Influence of nitrogen substitution on the electronic band structure of poly(peri-naphthalene)
402
Influence of nitrogen supply on the production of higher alcohols/esters and expression of flavour-related genes in cachaça fermentation
403
Influence of Nitrogen Supply on the Susceptibility of Wheat to Septoria tritici
404
Influence of nitrogen surface functionalities on the catalytic activity of activated carbon in low temperature SCR of NOx with NH3
405
Influence of nitrogen vacancies on the N K-ELNES spectrum of titanium nitride
406
Influence of nitrogen–argon gas mixtures on reactive magnetron sputtering of hard Si–C–N films
407
Influence of nitrogen-containing heterocyclic additives in I−/I3− redox electrolytic solution on the performance of Ru-dye-sensitized nanocrystalline TiO2 solar cell
408
Influence of nitrogen-induced grain refinement on mechanical properties of nitrogen alloyed type 316LN stainless steel
409
Influence of nitrogenizing and Al-doping on microstructures and thermoelectric properties of iron disilicide materials
410
Influence of N-limitation on Malic Enzyme Isoforms and Lipogenesis of Cunninghamella bainieri 2A1
411
Influence of N-N dimethyl formamide on electroless copper plating using hypophosphite as reducing agent
412
Influence of NO2 and dissolved iron on the S(IV) oxidation in synthetic aqueous solution
413
Influence of NO2 on S(IV) oxidation in aqueous suspensions of aerosol particles from two different origins
414
Influence of NO2 on the electrical conductivity of lutetium phthalo-naphthalocyanine thin films
415
Influence of NO3:NH4 ratios and silicon on growth, nitrate reductase activity and fatty acid composition of canola under saline conditions
416
Influence of noble metals (Rh, Pd, Pt) on Co-saponite catalysts for HDS and HC of heavy oil
417
Influence of noble metals on the performance of Co/SiO2 catalyst for 1-hexene hydroformylation
418
Influence of noble metals on the structural and catalytic properties of Ce-doped SnO2 systems
419
Influence of n-octanol on the bubble impact velocity, bouncing and the three phase contact formation at hydrophobic solid surfaces
420
Influence of nocturnal vertical stability on daytime chemistry: A one-dimensional model study
421
Influence of Node Dynamics on Cluster Global Time Continuity
422
Influence of nodule count on residual stresses and distortion in thin wall ductile iron plates of different matrices
423
Influence of noise on dynamics with fractal Fourier spectra
424
INFLUENCE OF NOISE ON SUBWAVELENGTH IMAGING OF TWO CLOSE SCATTERERS USING TIME REVERSAL METHOD: THEORY AND EXPERIMENTS
425
Influence of noise on the averaged false neighbors method for analyzing time series
426
Influence of noise sensitivity on annoyance of indoor and outdoor noises in residential buildings
427
Influence of non condensables on the condensation of vapour mixture forming immiscible liquids
428
Influence of non-/low plastic fines on cone penetration and liquefaction resistance
429
Influence of nonadiabatic coupling on oscillatory dephasing
430
Influence of non-bonded interphase on crack driving force in carbon nanotube reinforced polymer
431
Influence of noncoherent nucleation on the formation of the polycrystalline structure of metals electrodeposited in the presence of surface-active agents
432
Influence of non-covalent functionalization of carbon nanotubes on the rheological behavior of natural rubber latex nanocomposites
433
Influence of non-covalent interactions on properties of lanthanide systems with aromatic ligands
434
Influence of nondipolar parameters on the XPS intensities in solids
435
Influence of non-dipolar terms on the Cu L2,3 and M2,3 electron energy loss fine structure (EELFS) spectra in transmission and reflection mode
436
Influence of non-edible oil-cakes and their composts on growth, yield and Alternaria leaf spot disease in chilli
437
Influence of nonenzymatic glycation on biomechanical properties of cortical bone
438
Influence of non-enzymatically glycated collagen on monocyte–macrophage differentiation
439
Influence of nonfiber carbohydrate concentration on forage fiber digestion in vitro
440
Influence of non-Gaussian roughness on sputter depth profiles
441
Influence of non-Gaussian wind characteristics on wind turbine extreme response
442
Influence of Non-genetic Factors Weight and Carcass Traits in Indigenous Matebele Goat
443
Influence of non-glide stresses on plastic flow: from atomistic to continuum modeling
444
Influence of non-glide stresses on plastic flow: from atomistic to continuum modeling
445
Influence of non-hydrocarbon substances on the compressive strength of natural rubber latex-modified concrete
446
Influence of nonionic branched-chain alkyl glycosides on a model nano-emulsion for drug delivery systems
447
Influence of nonionic emulsifier included inside carboxylated polymer particles on theTformation of multihollow structure by the alkali\cooling Tmethod
448
Influence of non-ionic polymers on the rheological behaviour of Na+-montmorillonite clay suspensions. Part II. Homopolymer ethyleneoxide and polypropylene oxide–polyethylene oxide ABA copolymers
449
Influence of non-ionic polymers on the rheological behaviour of Na+-montmorillonite clay suspensions—I Nonylphenol–polypropylene oxide–polyethylene oxide copolymers
450
Influence of non-ionic surfactant on electrostatic complexation of protein-coated oil droplets and ionic biopolymers (alginate and chitosan)
451
Influence of non-ionic surfactants on surface activity of pesticide colloidal systems
452
Influence of nonionic surfactants on the optical response of cation selective membrane films Original Research Article
453
Influence of nonlinear absorption effects on optical bistability in semiconductor ring resonators
454
Influence of nonlinear atomic interaction on excitation of intrinsic localized modes in carbon nanotubes
455
Influence of nonlinear boundary conditions on the single-mode response of a cantilever beam
456
Influence of nonlinear effects on statistical properties of the radiation from SASE FEL
457
Influence of nonlinear effects on statistical properties of the radiation from SASE FEL
458
Influence of non-linear forces on beam behaviour in flutter conditions
459
Influence of Nonlinear Processes in Seismic Foci on Released Energy
460
Influence of non-linear stiffness and damping on the train-bridge resonance of a simply supported railway bridge
461
Influence of nonlinearities on the accuracy of the analytical solution for the shaft loaded blister test
462
Influence of nonlinearity and double elasticity on flexure of rock beams — I. Technical theory
463
Influence of nonlinearity and double elasticity on flexure of rock beams — II. Characterization of Dionysos marble
464
Influence of nonlinearity of the phonon dispersion relation on wave velocities in the four-moment maximum entropy phonon hydrodynamics
465
Influence of non-metal inclusions on mechanical properties of CLAM steel
466
Influence of non-metallic inclusions on the austenite-to-ferrite phase transformation
467
Influence of non-metallic inclusions on the austenite-to-ferrite phase transformation
468
Influence of nonmetals recycled from waste printed circuit boards on flexural properties and fracture behavior of polypropylene composites
469
Influence of non-migratory metal-chelating active packaging film on food quality: Impact on physical and chemical stability of emulsions
470
Influence of non-nutrient plant components on biotransformation enzymes
471
Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models
472
Influence of non-reactive particles on the microstructure of NiAl and NiAl–ZrO2 processed by thermal explosion
473
Influence of non-reactive solvent on optical performance, photopolymerization kinetics and morphology of nanoporous polymer gratings
474
Influence of nonsoluble contaminants on the flashover voltages of artificially contaminated insulators
475
Influence of non-starch polysaccharides isolated from wheat flour on the gelatinization and gelation of wheat starches
476
Influence of non-thermal plasma pre-treatment on the scaling characteristics of viscous oil wastewater during evaporation
477
Influence of nonuniform critical current density profile on magnetic field behavior of AC susceptibility in 2D Josephson junction arrays
478
Influence of non-uniform fiber arrangement on microscopic stress and failure initiation in thermally and transversely loaded CF/epoxy laminated composites
479
Influence of nonuniform magnetic fields on orientation of plant seedlings in microgravity conditions Original Research Article
480
Influence of Non-Uniform Temperature Distribution on Metallic Charge Length on Energy and Force Parameters During Groove-Rolling Original Research Article
481
Influence of nonuniformity of ZnO varistors on their energy absorption capability
482
Influence of non-volatile additives on the diffusion of solvents in polymeric coatings
483
Influence of nonylphenol on the microbial community of lake sediments in microcosms
484
Influence of noodle processing (industrial protocol) on deoxynivalenol
485
Influence of norbixin on plasma cholesterol-associated lipoproteins, plasma arylesterase/paraoxonase activity and hepatic lipid peroxidation of Swiss mice on a high fat diet
486
Influence of norbornanone substituents on both the Wagner–Meerwein skeletal rearrangements under sulfonation conditions and the diastereoselectivity of the corresponding N,N′-bis-fumaroyl sultams in uncatalyzed Diels–Alder cycloadditions to cyclopenta-1,3
487
Influence of normal load and sliding speed on the tribological property of amorphous carbon nitride coatings sliding against Si3N4 balls in water
488
Influence of Normal Load and Temperature on Tribological Properties of Jatropha Oil
489
Influence of Normal Load on Joint Dilatation Rate
490
Influence of Normal Load, Sliding Speed and Ambient Temperature on Wear Resistance of ZG42CrMo Original Research Article
491
Influence of normal stress on shear strength along 〈1 1 1〉{1 1 0} and 〈1 1 1〉{1 1 2} deformation paths in B2 NiTi alloy from first principles
492
Influence of normal stress on theoretical shear strength of fcc metals
493
Influence of normalization in dynamic reactive load models
494
Influence of North American land processes on North Atlantic Ocean variability
495
Influence of nose perturbations on behaviors of asymmetric vortices over slender body
496
Influence of Notch Depth-to-Width Ratios on J-Integral and Critical Failure Load of Single-Edge Notched Tensile Aluminium 8011 Alloy Specimens
497
Influence of notch geometry and interface on stress concentration and distribution in micro-tensile bond strength specimens
498
Influence of notch geometry on the estimation of the stress intensity factor threshold by considering the Theory of Critical Distances
499
Influence of notch on the elastic–plastic response of clamped beams subjected to low velocity impact
500
Influence of notch orientation and temperature on the impact behavior of a dual hardness steel composite
501
Influence of notch radius and microstructure on the fracture behavior of Al–Zn–Mg–Cu alloys of different purity
502
Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC–Co cemented carbides
503
Influence of no-tillage on the distribution and lability of phosphorus in Finnish clay soils
504
Influence of novel additive on BMI resin and BMI resin matrix composite
505
Influence of Novel Drugs on Prophylaxis Migraine Syndromes : The Challenge Is Open
506
Influence of novel food processing technologies on the rheological and thermophysical properties of whey proteins Original Research Article
507
Influence of NOx adsorbed species on component permeation through ZSM-5 membranes
508
Influence of nozzle geometry and injection conditions on the cavitation flow inside a diesel injector
509
Influence of nozzle geometry on ignition and combustion for high-speed direct injection diesel engines under cold start conditions
510
Influence of nozzle geometry on the near-field structure of a highly underexpanded sonic jet
511
Influence of Nozzle Numbers on Analysis of Air- Water Flow in a Rotating Packed Bed with Computational Fluid Dynamics
512
Influence of nozzle type and size on drift potential by means of different wind tunnel evaluation methods
513
Influence of N-Phthaloyl GABA on the Circadian Rhythms of Lipid Peroxidation and Antioxidants in Wistar Rats under Constant Light
514
Influence of NrGa-flux ratio on optical properties and surface morphology of GaN grown on sapphire 0001/by MBE
515
Influence of N-substituted lactams on acyclic free radical based hydrogen transfer
516
Influence of n-type chemical doping layer on the performance of organic photovoltaic solar cells
517
Influence of nuclear data on uranium enrichment results obtained by XKα spectral region analysis
518
Influence of nuclear de-excitation on observables relevant for space exploration Original Research Article
519
Influence of nuclear fluctuations on the NMR parameters of bullvalene: A Feynman path integral – Ab initio study
520
Influence of nuclear spin polarization on quantum wire conductance
521
Influence of nuclear spin polarization on quantum wire conductance
522
Influence of nucleation agents on crystallization and machinability of mica glass–ceramics
523
Influence of nucleation and growth phenomena on microstructural evolution during droplet-based deposition Original Research Article
524
Influence of nucleation seeding on the hydration kinetics and compressive strength of alkali activated slag paste
525
Influence of nucleonic motion in relativistic Fermi gas inclusive responses
526
Influence of nucleosome structure on the three-dimensional folding of idealized minichromosomes
527
Influence of Nucleotide Effectors on the Kinetics of the Quaternary Structure Transition of Allosteric Aspartate Transcarbamylase
528
Influence of Nucleotide Effectors on the Kinetics of the Quaternary Structure Transition of Allosteric Aspartate Transcarbamylase Original Research Article
529
Influence of number and orientation of screws on stability in the internal fixation of unstable femoral neck fractures
530
Influence of number of finger joints per stud on mechanical performance of wood shearwalls
531
Influence of Number of Parity on Bone Mineral Density among Postmenopausal Women
532
Influence of number of simulated particles on DSMC modeling of micro-scale Rayleigh–Bénard flows
533
Influence of numerical and viscous dissipation on shock wave reflections in supersonic steady flows
534
Influence of numerical model decisions on the flow-induced vibration of a computational vocal fold model
535
Influence of numerical schemes on statistical properties of computed charged particle trajectories in turbulent electromagnetic fields
536
Influence of Nursing Intervention on Recurrent Vulvovaginal Can-didiasis Patients Treated with ATP-infrared Bio-effect Technique
537
Influence of Nut Size,Hydro Priming Duration and Storage Period on Seedling Emergence and Early Seedling Vigour Characters in Cashew (Anacardium occidentale L.)
538
Influence of nutrient amendment on the biodegradation of wheat straw during solid state fermentation with Trametes versicolor
539
Influence of nutrient conditions on the transport of bacteria in saturated porous media
540
Influence of nutrient deficiency caused by host developmental arrest on the growth and development of a koinobiont parasitoid
541
Influence of nutrient deprivations on lipid accumulation in a dominant indigenous microalga Chlorella sp., BUM11008: Evaluation for biodiesel production
542
Influence of nutrient factors on production of mucilage by Amphora coffeaeformis var. perpusilla
543
Influence of nutrient inputs from a wetland dominated by agriculture on the phytoplankton community in a shallow harbour at the Spanish Mediterranean coast
544
Influence of nutrient loads, feeding frequency and inoculum source on growth of Chlorella vulgaris in digested piggery effluent culture medium
545
Influence of nutrient management strategies on variability of soil fertility, crop yields and nutrient balances on smallholder farms in Zimbabwe
546
Influence of nutrient utilization and remineralization stoichiometry on phytoplankton species and carbon export: A modeling study at BATS
547
Influence of nutrients and mixing on the primary production and community respiration in the Gulf of Riga
548
Influence of nutrients on carbon isotope fractionation by natural populations of Prymnesiophyte algae in NE Pacific
549
Influence of nutrition labelling on food portion size consumption
550
Influence of nutrition on liver oxidative metabolism
551
INFLUENCE OF NUTRITION ON PRODUCTIVITY AND CHEMICAL COMPOSITION OF KHORASAN WHEAT - Triticum turgidum L. ssp. turanicum Jakubz
552
Influence of nutrition on the effectiveness of superovulation programmes in ewes: effect on oocyte quality and post-fertilization development
553
Influence of nutrition, fibre diameter and fibre length on the fibre curvature of cashmere
554
INFLUENCE OF NUTRITION’ S ON LONGEVITY AND FECUNDITY THE COCCINELLID PREDATORS, Coccinella undecimpunctata L. (COLEOPTERA: COCCINELLIDAE)
555
Influence of nutritional factors on bone collagen fibrils in ovariectomized rats
556
Influence of nutritional iron deficiency anemia on DNA stability and lipid peroxidation in rats
557
Influence of nutritional knowledge on perceived healthiness and willingness to try functional foods
558
Influence of nutritional status on cognitive, functional and neuropsychiatric deficits in Alzheimerʹs disease
559
Influence of nutritional status on serum large N-truncated PTH, but not PTH(1–84) in hemodialysis patients
560
Influence of nutritional status on the pharmacokinetics of acetylsalicylic acid and its metabolites in children with autoimmune disease
561
Influence of nutritional stress on digestive enzyme activities in juveniles of two marine clam species, Ruditapes decussatus and Venerupis pullastra
562
Influence of nutritive factors on C50 carotenoids production by Haloferax mediterranei ATCC 33500 with two-stage cultivation
563
Influence of O and Co on the early stages of sintering of WC–Co: a surface study by AES and STM Original Research Article
564
Influence of O/M ratio on sintering behavior of (U0.8, Pu0.2)O2±x
565
Influence of O2 admixture and sputtering pressure on the properties of ITO thin films deposited on PET substrate using RF reactive magnetron sputtering
566
Influence of O2 and CO2 plasma treatment on the deposition of chitosan onto polyethylene terephthalate (PET) surfaces
567
Influence of O2 and H2 on NO reduction by NH3 over Ag/Al2O3: A transient isotopic approach
568
Influence of O2 and N2 Concentrations on the Characteristics of Plasma in DC Cylindrical Magnetron Discharge by Langmuir Probe
569
Influence of O2 and O3 regeneration on the metallic phase of the Pt—Re/Al2O3 catalyst Original Research Article
570
Influence of O2 Content in Circulating Flue Gas on Iron Ore Sintering Original Research Article
571
Influence of O2 flow rate on the structural properties of MgO films deposited by dual magnetron sputtering
572
Influence of O2 partial pressure on the growth of nanostructured anatase phase TiO2 thin films prepared by DC reactive magnetron sputtering
573
Influence of O2/Ar flow ratio on the structure and optical properties of sputtered hafnium dioxide thin films
574
Influence of O2-induced surface roughening on the chemistry of water on TiO2(1 1 0)
575
Influence of oak woods of different geographical origins on quality of wines aged in barriques and using oak chips
576
Influence of Oat beta-Glucan Preparations on the Perception of Mouthfeel and on Rheological Properties in Beverage Prototypes
577
Influence of obesity on cardiac mass and blood pressure in the elderly
578
Influence of obesity on the incidence and treatment of genitourinary malignancies
579
Influence of obesity on the use of sickness absence and social benefits among pregnant working women
580
Influence of Obestatin and Short-Term Treadmill Exercise on Plasma Acyl-Ghrelin and Body Weight in Wistar Rat
581
Influence of object concentration on finite strain and effective viscosity contrast: insights from naturally deformed packstones
582
Influence of oblique angle and heating height on flame structure, temperature field and efficiency of an impinging laminar jet flame
583
Influence of Oblique Incidence on the Reflection Losses in a Multilayer Human Body Medium
584
Influence of observation plane on twin variant identification in magnesium via trace and misorientation analysis
585
Influence of observational noise on the recurrence quantification analysis
586
Influence of observations on the misclassification probability in quadratic discriminant analysis
587
Influence of obstacle aspect ratio on tripped cylinder wakes
588
Influence of Obstructive Sleep Apnea on Mortality in Patients With Heart Failure Original Research Article
589
Influence of occlusal geometry on ceramic crown fracture; role of cusp angle and fissure radius
590
Influence of ocean CO2 sequestration on bacterial production
591
Influence of oceanographic processes on the early life stages of the blue shrimp (Litopenaeus stylirostris) in the Upper Gulf of California
592
Influence of octacyanoniobate(IV)-bridging geometry on Tc in Mn2Nb ferrimagnets of identical 3D topology
593
Influence of octahedral tilting and composition on electrical properties of the Li0.2 − xNaxLa0.6TiO3 (0 ≤ x ≤ 0.2) series
594
Influence of octakis-functionalized polyhedral oligomeric silsesquioxanes on the physical properties of their polymer nanocomposites
595
Influence of octanedithiol on the nanomorphology of PCPDTBT:PCBM blends studied by solid-state NMR
596
Influence of octupole photoionization transitions on the angular distribution of photoelectrons from solids with account for elastic scattering
597
Influence of Ocular Hypotenive Eyedrop on Intraocular Preure Fluctuation With Potural Change in Eye With Normal-tenion Glaucoma
598
Influence of odour concentration and individual odour thresholds on the hedonic tone of odour from animal production
599
Influence of oenological practices on the formation of biogenic amines in quality red wines
600
Influence of oenological practices on the formation of biogenic amines in quality red wines
601
Influence of oestradiol on induction of EROD activity in roach (Rutilus rutilus L.)
602
Influence of oestrogen and androgen on modelling of the mandibular condylar bone in ovariectomized and orchiectomized growing mice
603
Influence of oestrous cyclicity on certain metabolic alterations in the submandibular glands of female rats
604
Influence of o-fluorophenylbiguanidine on the kinetics of hydrogen evolution reaction on iron, the nature of rate-determining step and hydrogen diffusion through a steel membrane
605
Influence of OH− concentration on the illitization of kaolinite at high pressure
606
Influence of ohmic heating and vacuum impregnation on the osmotic dehydration kinetics and microstructure of pears (cv. Packham’s Triumph) Original Research Article
607
Influence of oil composition on the formation of fatty acid esters of 2-chloropropane-1,3-diol (2-MCPD) and 3-chloropropane-1,2-diol (3-MCPD) under conditions simulating oil refining
608
Influence of Oil Contamination on Geotechnical Properties of Basaltic Residual Soil
609
Influence of oil content and SBR type on blowout behaviors of SBR composites
610
Influence of oil content on sorption isotherms of four varieties of peanut at 25°C
611
Influence of oil degradation on the amounts of acrylamide generated in a model system and in French fries
612
Influence of oil droplet surface charge on the performance of antibody–emulsion conjugates
613
Influence of oil on flow condensation heat transfer of R410A inside 4.18 mm and 1.6 mm inner diameter horizontal smooth tubes
614
Influence of oil on nucleate pool boiling heat transfer of refrigerant on metal foam covers
615
Influence of oil on R-410A two-phase frictional pressure drop in a small U-type wavy tube
616
Influence of oil temperature on gear failures
617
Influence of oil-in-water emulsion characteristics on initial dynamic flavour release
618
Influence of oilseeds in combination with vitamin E supplementation in the diet on backfat quality of pigs
619
Influence of oily wastes on the pyrolysis of scrap tire
620
Influence of oligomeric silicic and humic acids on aluminum accumulation in a freshwater grazing invertebrate
621
Influence of oligomerically modified reactive montmorillonite on thermal and mechanical properties of aromatic polyamide–clay nanocomposites Original Research Article
622
Influence of oligothiophene layer on PVK-based blue light-emitting diode
623
Influence of olive cultivars and period of harvest on the contents of Cu, Cd, Pb, and Zn in virgin olive oils
624
Influence of Olive Leaves and its Extracts by Two Methods on Diabetic Rats.
625
Influence of olive oil on carotenoid absorption from tomato juice and effects on postprandial lipemia
626
Influence of olive oil solid waste applications on soil pH, electrical conductivity, soil nitrogen transformations, carbon content and aggregate stability
627
Influence of olive paste preparation conditions on virgin olive oil triterpenic compounds at laboratory-scale
628
Influence of omega-3 fatty acids on the growth of human colon carcinoma in nude mice
629
Influence of Omeprazole on the Antiplatelet Action of Clopidogrel Associated With Aspirin: The Randomized, Double-Blind OCLA (Omeprazole CLopidogrel Aspirin) Study Original Research Article
630
Influence of one and two dimensional piezoelectric actuation on active vibration control of smart panels
631
Influence of one- and two-dimensional gel electrophoresis procedure on metal–protein bindings examined by electrospray ionization mass spectrometry, inductively coupled plasma mass spectrometry, and ultrafiltration
632
Influence of one bout of vigorous exercise on ascorbic acid in plasma and oxidative damage to DNA in blood cells and muscle in untrained rats
633
Influence of one or two successive annual applications of organic fertilisers on the enzyme activity of a soil under barley cultivation
634
Influence of One-Electron Oxidation and One-Electron Reduction on the Tautomeric Preferences for Purine
635
Influence of one-year treatment with lovastatin on myocardial remodeling and ischemia in patients with coronary artery disease
636
Influence of on-farm production practices on sensory and technological quality characteristics of pork loin
637
Influence of Online Banking on Bank Performance in Nepal: Mediating Role of Training and Development
638
Influence of Online Shopping Behavior Factors on E-Satisfaction of Customer
639
Influence of On-Pump Versus Off-Pump Techniques and Completeness of Revascularization on Long-Term Survival After Coronary Artery Bypass
640
Influence of ontogenetic and environmental changes in the otolith microchemistry of juvenile sole (Solea solea)
641
Influence of oocyte donor on in vitro embryo production in buffalo
642
Influence of oocyte quality, culture media and gonadotropins on cleavage rate and development of in vitro fertilized buffalo embryos
643
Influence of oophorectomy on glycemia and lipidogram
644
Influence of open circuit regrind milling on UG-2 ore composition and mineralogy at Impala’s UG-2 concentrator
645
Influence of open holes on composites delamination induced by low velocity impact loads
646
Influence of openings on seismic performance of masonry building walls
647
Influence of operating conditions and coal properties on NOx and N2O emissions in pressurized fluidized bed combustion of subbituminous coals
648
Influence of Operating Conditions and Column Configuration on the Performance of Reactive Distillation Columns with Liquid– Liquid Separators
649
Influence of operating conditions and design parameters on hydrodynamics and mass transfer in an emulsion loop–venturi reactor
650
Influence of operating conditions and impeller design on the continuous manufacturing of food foams Original Research Article
651
Influence of operating conditions and the role of sulfur in the formation of aerosols from biomass combustion
652
Influence of operating conditions for volatile fatty acids enrichment as a first step for polyhydroxyalkanoate production on a municipal waste water treatment plant
653
Influence of operating conditions in a continuously stirred tank reactor on the formation of carbon species on alumina supported cobalt Fischer–Tropsch catalysts
654
Influence of operating conditions on cleaning efficiency in sequencing batch reactor (SBR) activated sludge process — water rinsing introduced membrane filtration process Original Research Article
655
Influence of operating conditions on extracellular polymeric substances and surface properties of sludge flocs
656
Influence of operating conditions on methylene blue uptake by a smectite rich clay fraction
657
INFLUENCE OF OPERATING CONDITIONS ON POPULATION DYNAMICS IN NITRIFYING BIOFILMS
658
INFLUENCE OF OPERATING CONDITIONS ON POPULATION DYNAMICS IN NITRIFYING BIOFILMS
659
Influence of operating conditions on the ammonia electro-oxidation rate in wastewaters from power plants (ELONITA™ technique
660
Influence of operating conditions on the efficiency of domestic wastewater treatment in membrane bioreactors Original Research Article
661
Influence of operating conditions on the rejection of cobalt and lead ions in aqueous solutions by a nanofiltration polyamide membrane
662
Influence of operating conditions on the retention of phosphate in water by nanofiltration
663
Influence of operating conditions on the surface morphology of microcapsules prepared by in situ polymerization
664
Influence of operating parameters on cake formation in pilot scale pulse-jet bag filter
665
Influence of operating parameters on chromic ions removal from aqueous solution by liquid membranes Original Research Article
666
Influence of operating parameters on photocatalytic degradation of phenol in UV/TiO2 process
667
Influence of operating parameters on separation of green syrup colored matter from sugar beet by ultra- and nanofiltration Original Research Article
668
Influence of operating parameters on surface properties of RF glow discharge oxygen plasma treated TiO2/PET film for biomedical application
669
Influence of operating parameters on the Apatite flotation kinetics
670
Influence of operating parameters on the flotation of apatite
671
Influence of operating pressure on the gas hold-up in bubble columns for high viscous media
672
Influence of operating temperature on performance of electrostatic precipitator for pulverized coal combustion boiler
673
Influence of Operating Variables on Performance of Nanofiltration Membrane for Dye Removal from Synthetic Wastewater Using Response Surface Methodology
674
Influence of operation conditions and additives on the development of producer gas and tar reduction in air gasification of construction woody wastes using a two-stage gasifier
675
Influence of operation conditions on direct borohydride fuel cell performance
676
Influence of operation conditions on direct NaBH4/H2O2 fuel cell performance
677
Influence of operation parameters in the modeling of alkaline water electrolyzers for hydrogen production
678
Influence of operation variables on fast pyrolysis of Miscanthus sinensis var. purpurascens
679
Influence of operation variables on the recovery of zinc from spent pickling effluents using the emulsion pertraction technology Original Research Article
680
Influence of operational and geometrical parameters on the performance of twin thermoacoustic prime mover
681
Influence of operational conditions on the performance of a mesh filter activated sludge process
682
Influence of Operational Parameters and Kinetic Modelling of Catalytic Wet Air Oxidation of Phenol by Al/Zr Pillared Clay Catalyst
683
Influence of operational parameters and material properties on the contact heat transfer in rotary kilns
684
Influence of operational parameters on the performance of PEMFCs with serpentine flow field channels having different (rectangular and trapezoidal) cross-section shape
685
Influence of operational tolerances on HMA performance
686
Influence of operational variables in a hydrodynamic bearing on the generation of acoustic emission
687
Influence of operator experience in radiofrequency ablation of malignant liver tumours on treatment outcome
688
Influence of operator skill on microleakege of total-etch and self-etch bonding systems
689
Influence of o-Phenanthroline on DNA Single-Strand Breaks, Alkali-Labile Sites, Glutathione Reductase, and Formation of Chromium(V) in Chinese-Hamster V-79 Cells Treated with Sodium Chromate(VI)
690
Influence of Oral Appliances for Mandibular Advancement on Dentitions Using a Strain Gauge Analysis: A Pilot Study
691
Influence of Oral Calcium Intake During Pregnancy on Blood and Urine Calcium Levels of Newborns
692
Influence of oral health on febrile status in long-term hospitalized elderly patients
693
Influence of oral health on the quality of life of institutionalized and noninstitutionalized elderly people
694
Influence of orally administered CpG-ODNs on the humoral response to bovine serum albumin (BSA) in chickens
695
Influence of orally administered CpG-ODNs on the humoral response to bovine serum albumin (BSA) in chickens
696
Influence of orange juice in the levels and in the genotoxicity of iron and copper
697
Influence of Order–Disorder Transition on Thermal Conductivity of Solids
698
Influence of ordering change on the optical and thermal properties of inflation polyethylene films
699
Influence of ordering kinetics on dendritic growth morphology Original Research Article
700
Influence of organic acid concentration on survival of Listeria monocytogenes and Escherichia coli 0157:H7 in beef carcass wash water and on model equipment surfaces Original Research Article
701
Influence of organic acids exuded by plants on the interaction of copper with the polysaccharidic components of the root mucilages
702
Influence of organic acids on surfactant self-assemblies in surfactant/oil/water systems
703
Influence of organic acids on the transport of heavy metals in soil Original Research Article
704
Influence of organic acids, complexing agents and heavy metals on the bioleaching of iron from kaolin using Fe(III)-reducing bacteria
705
Influence of organic admixtures on the rheological behaviour of cement pastes
706
Influence of organic amendment on the adsorption and leaching of ethametsulfuron-methyl in acidic soils in China
707
Influence of organic amendments on diuron leaching through an acidic and a calcareous vineyard soil using undisturbed lysimeters
708
Influence of organic amendments on soil quality potential indicators in an urban horticultural system
709
Influence of organic amendments on soil structure and soil loss under simulated rain
710
Influence of organic amendments on soil structure and soil loss under simulated rain
711
INFLUENCE OF ORGANIC AND AMMONIA LOADING ON NITRIFIER ACTIVITY AND NITRIFICATION PERFORMANCE FOR A TWO-STAGE BIOLOGICAL AERATED FILTER SYSTEM
712
INFLUENCE OF ORGANIC AND AMMONIA LOADING ON NITRIFIER ACTIVITY AND NITRIFICATION PERFORMANCE FOR A TWO-STAGE BIOLOGICAL AERATED FILTER SYSTEM
713
Influence of Organic and Chemical Fertilization on Fruit Yield and Quality of Plastic-House Grown Strawberry
714
INFLUENCE OF ORGANIC AND INORGANIC AMENDMENTS ON WEEDS DENSITY AND CHEMICAL COMPOSITION
715
INFLUENCE OF ORGANIC an‎d INORGANIC FERTILIZERSON SOIL NUTRIENTS AVAILABILITY an‎d WHEAT PRODUCTIVITY.
716
Influence of organic and inorganic phosphorus supply on the maximum secretion of acid phosphatase by plants
717
INFLUENCE OF ORGANIC an‎d MINERAL FERTILIZERS ON SOME SOIL PHYSICAL PROPERTIES an‎d ZEA MAYS PRODUCTIVITY
718
Influence of organic and mineral N fertiliser on N2O fluxes from a temperate grassland
719
Influence of organic by-products and nitrogen source on chemical and microbiological status of an agricultural soil
720
Influence of organic carbon decomposition on calcite dissolution in surficial sediments of a freshwater lake
721
Influence of organic coatings on the stability of macrodefect-free cements exposed to water
722
Influence of organic compost compounds on soil chemical and physical properties
723
Influence of organic co-solvents on the activity and substrate specificity of feruloyl esterases
724
Influence of organic dyes on potassium sulfate crystal growth: a joint morphological and atomic force microscopy analysis
725
Influence of organic fertilizer and biostimulant on the growth and biomass of dill (anethum graveolens)
726
Influence of organic gate dielectrics on the performance of pentacene thin film transistors
727
Influence of organic ligands on Cr desorption from hydroxy-Cr intercalated montmorillonite
728
Influence of organic ligands on the stabilization of palladium nanoparticles
729
Influence of organic loading on an anaerobic sequencing biofilm batch reactor (ASBBR) as a function of cycle period and wastewater concentration
730
Influence of organic loading on the performance and microbial community structure of an anaerobic stage reactor treating pharmaceutical wastewater Original Research Article
731
Influence of organic loading rate and solid retention time on polyhydroxybutyrate production from hybrid poplar hydrolysates using mixed microbial cultures
732
Influence of Organic Manure and Bacterium of Bacillus Circulans on Yield and Essential Oil Concentration in Anise (Pimpinella Anisum)
733
Influence of organic manure on the vegetative growth and tuber production of potato(solanumtuberosum L varspunta) in a Sahara desert region
734
Influence of organic manures on arbuscular mycorrhizal fungi associated with Vigna unguiculata (L.) Walp. in relation to tissue nutrients and soluble carbohydrate in roots under field conditions
735
Influence of organic matter and texture on the compactability of Technosols
736
Influence of Organic Matter Decomposition on Soluble Carbon and Its Copper-Binding Capacity
737
Influence of organic matter generated by Chlorella vulgaris on five different modes of flocculation
738
Influence of organic matter on earthworm production and behaviour: a laboratory-based approach with applications for soil restoration
739
Influence of organic matter on flocculation of Chlorella vulgaris by calcium phosphate precipitation
740
Influence of organic matter on municipal solid waste incinerator bottom ash carbonation
741
Influence of organic matter on rheological properties of soil
742
Influence of organic matter on the uptake of cadmium, zinc, copper and iron by sorghum plants
743
Influence of organic matter source and diagenetic state on photochemical release of dissolved organic matter and nutrients from resuspendable estuarine sediments
744
Influence of organic modification on the structure and properties of polyurethane/sepiolite nanocomposites
745
Influence of organic shock loads in an ASBBR treating synthetic wastewater with different concentration levels
746
Influence of organic solvent on the behaviour of camphor and α-pinene enantiomers in reversed-phase liquid chromatography systems with α-cyclodextrin as chiral additive
747
Influence of organic solvent on the separation of an ionic liquid from a lignin–ionic liquid mixture
748
Influence of organic solvent treatment on elasticoluminescent property of europium-doped strontium aluminates
749
Influence of organic solvents in the mobile phase on the determination of carboxylic acids and inorganic anions in grape juice by ion chromatography
750
Influence of organic solvents on interfacial water at surfaces of silica gel and partially silylated fumed silica
751
Influence of organic solvents on the sensitivity of a bioluminescence toxicity test with Vibrio harveyi
752
Influence of organic species on surface area of bismuth molybdate catalysts in complexation and spray drying methods Original Research Article
753
Influence of organic systems on milk fatty acid profile and CLA in goats
754
Influence of organic systems on Stearoyl-CoA desaturase gene expression in goat milk
755
Influence of organic thickening admixtures on the rheological properties of mortars: Relationship with water-retention
756
Influence of organic volumetric loading rate, nutrient balance and alkalinity: COD ratio on the anaerobic sludge granulation of an UASB reactor treating sugar cane molasses
757
Influence of Organic Wastes on Evaporation and Hydraulic Properties of Sandy Soil
758
Influence of Organic, Inorganic and Organo-Mineral Fertilizers on Yield and Quality of Sweet Potato (Ipomoea batatas)
759
Influence of organically modified NiAl layered double hydroxide (LDH) loading on the rheological properties of poly (methyl methacrylate) (PMMA)/LDH blend solution
760
Influence of Organics and Bio Fertilizers on Biochemical Properties of Calendula officinalis L.
761
Influence of organics and clastic lake fills on distributary channel processes in the distal Rhine–Meuse delta (The Netherlands)
762
Influence of organics on ZnO coatings prepared by chemical solution deposition
763
Influence of organic-salt interactions on membrane (UF) fouling potential and pre-treatment by coagulation Original Research Article
764
Influence of organised scaring on distribution and habitat choice of geese on pastures in Northern Norway
765
Influence of Organizational Citizenship Behavior on Hotel Employees’ Job Satisfaction and Subjective Well-Being
766
Influence of Organizational Justice and Career Success to The Organizational Commitment
767
Influence of organo-clay on electrical and mechanical properties of PP/MWCNT/OC nanocomposites
768
Influence of Organo-Montmorillonite on Electrical Tree Parameters in Epoxy Resin Under Ac Ramp Voltage
769
Influence of organo-montmorillonites on fatigue properties of bitumen and mortar
770
Influence of organo-montomorillonite on mechanical and rheological properties of polyamide nanocomposites
771
Influence of orientation and temperature on the fatigue crack growth of a nickel-based directionally solidified superalloy
772
Influence of orientation and volume fraction of Aramid fabric on abrasive wear performance of polyethersulfone composites
773
Influence of orientation errors on quasi-homogeneity of composite laminates
774
Influence of orientation errors on quasi-homogeneity of composite laminates
775
Influence of orientation of long fibers in carbon fiber–polyetherimide composites on mechanical and tribological properties
776
Influence of orientation on the size effect in bcc pillars with different critical temperatures
777
Influence of orientational relaxation on the electrostrictive coupling in K1−xLixTaO3 Original Research Article
778
Influence of orifice distribution on the thermal and static properties of hybridly lubricated bearings
779
Influence of orifices on stability of rotor-aerostatic bearing system
780
Influence of Origanum vulgare L. essential oil on enterotoxin production, membrane permeability and surface characteristics of Staphylococcus aureus
781
Influence of origin of ovarian cancer on efficacy of screening
782
Influence of origin, harvesting time and weather conditions on content of inositols and methylinositols in sea buckthorn (Hippophaë rhamnoides) berries
783
Influence of original powders on the microstructure and properties of thermal barrier coatings deposited by supersonic atmospheric plasma spraying, Part I: Microstructure
784
Influence of original powders on the microstructure and properties of thermal barrier coatings deposited by supersonic atmospheric plasma spraying, part II: Properties
785
Influence of orography on precipitation amount and distribution in NW Greece; A case study
786
Influence of orthoclase phenocrysts on point load strength of granitic rocks
787
Influence of orthodontic treatment on development of third molars
788
Influence of orthogonal burnishing parameters on surface characteristics for various materials
789
Influence of orthogonal shear on texture and R value in aluminum sheet
790
Influence of orthopaedic drilling parameters on temperature and histopathology of bovine tibia: An in vitro study
791
Influence of orthopaedic-technical aid on the kinematics and kinetics of the knee joint of patients with neuro-orthopaedic diseases
792
Influence of orthophosphate ions on the dissolution of tricalcium silicate
793
Influence of orthostatic hypotension in Parkinsonʹs disease on plasma atrial natriuretic peptide
794
Influence of orthotic devices prescribed using pressure data on lower extremity kinematics and pressures beneath the shoe during running
795
Influence of Oscillating Temperatures on the Competitive Infection and Colonization of the Migratory Grasshopper by Beauveria bassiana and Metarhizium flavoviride
796
Influence of osmosis on the diffusion from concentrated solutions through composite/asymmetric membranes: Theoretical analysis
797
Influence of osmotic concentration, continuous high frequency ultrasound and dehydration on antioxidants, colour and chemical properties of rabbiteye blueberries
798
Influence of osmotic dehydration and high temperature short time processes on dried sweet potato (Ipomoea batatas Lam.) Original Research Article
799
Influence of osmotic dehydration conditions on apple air-drying kinetics and their quality characteristics Original Research Article
800
Influence of osmotic dehydration on microwave-convective drying of frozen strawberries Original Research Article
801
Influence of osmotic dehydration on texture, respiration and microbial stability of apple slices (Var. Granny Smith) Original Research Article
802
Influence of osmotic pre-treatments on rehydration characteristics of carrots Original Research Article
803
Influence of outcome valence in the subjective experience of episodic past, future, and counterfactual thinking
804
Influence of outdoor rearing and indoor temperature on growth performance, carcass, adipose tissue and muscle traits in pigs, and on the technological and eating quality of dry-cured hams
805
Influence of outer corner angle (OCA) on the plastic deformation and texture evolution in equal channel angular pressing
806
Influence of outer secondary-air vane angle on combustion characteristics and NOx emissions of a down-fired pulverized-coal 300 MWe utility boiler
807
Influence of outphase Cu50Ti50 amorphous alloy addition on microstructural evolution of mechanically alloyed Zr66.7Ni33.3 amorphous alloy
808
Influence of ovarian hormones on endocrine activity of gonadotroph cells in the adenohypophysis of lambs during the postnatal transition to prepuberty
809
Influence of Ovarian Side and Initiation Time of First Aspiration with Relation of Transvaginal Follicular Aspiration in HF x Sahiwal Cows
810
Influence of ovarian stimulation on the detection of human papillomavirus DNA in cervical scrapes obtained from patients undergoing assisted reproductive techniques
811
Influence of ovariectomy and 17β-estradiol treatment on insulin sensitivity, lipid metabolism and post-ischemic cardiac function
812
Influence of Ovariectomy in the Right Ventricular Contractility in Heart Failure Rats
813
Influence of overall structural response on perforation of concrete targets
814
Influence of over-expression of cytosolic aspartate aminotransferase on amino acid metabolism and defence responses against Botrytis cinerea infection in Arabidopsis thaliana
815
Influence of overhead transmission line on grounding impedance measurement of substation
816
Influence of overlapping tracks on microstructure evolution and corrosion behavior in laser-melt magnesium alloy
817
Influence of overloading on fatigue durability and stability of residual stresses in shot peened normalized steel
818
Influence of overloads on dwell time fatigue crack growth in Inconel 718
819
Influence of overpressure on sound transmission through curved panels
820
Influence of oversized elements (Hf, Zr, Ti and Nb) on the thermal stability of vacancies in type 316L stainless steels
821
Influence of overweight and obesity on the diabetes in the world on adult people using spatial regression
822
INFLUENCE OF OVERWEIGHT AND OBESITYIN CHILDREN ON ANESTHESIOLOGICAL COMPLICATIONS APPEARANCE DURING ADENOIDECTOMY AND ADENOTONSILLECTOMY
823
INFLUENCE OF OVERWINTERING LARVAL DIAPAUSE ON SUSCEPTIBILITY OF Pectinophora gossypiella (SAUNDERS) (LEPIDOPTERA: GELECHIIDAE) TO SEVERAL INSECTICIDES
824
Influence of oxalic acid addition to chromic acid on the anodising of Al 2024 alloy
825
Influence of oxalic acid on the kinetics of Al(OH)3 growth from caustic soda solutions
826
Influence of oxalic and malic acids in chickpea leaf exudates on the biological activity of CryIAc towards Helicoverpa armigera
827
Influence of oxazolidines and zirconium oxalate crosslinkers on the hydrothermal, enzymatic, and thermo mechanical stability of type 1 collagen fiber
828
Influence of oxidant-species scavengers on the chemiluminescence (CL) emission generated during the oxidation of pyrogallol by hydrogen peroxide Original Research Article
829
Influence of oxidation coefficient on product properties in sewage sludge treatment by supercritical water
830
Influence of oxidation conditions on the properties of indium oxide thin films
831
Influence of Oxidation Damages on Mechanical Properties ofSiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers
832
Influence of oxidation in aqueous medium on the structure and properties of lignites
833
Influence of oxidation of dissolved organic matter (DOM) on subsequent water treatment processes
834
Influence of oxidation on fatigue life of a carbon/silicon carbide composite in water vapor containing environments
835
Influence of oxidation on myofibrillar proteins degradation from bovine via μ-calpain
836
Influence of oxidation on near-surface γ′ fraction and resulting creep behaviour of single crystal Ni-base superalloy M247LC SX
837
Influence of oxidation on space charge dynamics in DC aged low-density polyethylene
838
Influence of oxidation on the susceptibility of purified desmin to degradation by μ-calpain, caspase-3 and -6
839
Influence of oxidation on the transport properties of IV–VI-thin films
840
Influence of oxidation process on the adsorption capacity of activated carbons from lignocellulosic precursors
841
Influence of oxidation state of phosphorus on the thermal and flammability of polyurea and epoxy resin
842
Influence of oxidation state of polyaniline on physicochemical and transport properties of Nafion/polyaniline composite membrane for DMFC
843
Influence of oxidation temperature, film thickness and substrate on NO2 sensing of SnO2 ultra thin films
844
Influence of oxidation time on semiconductive behaviour of thermally grown oxide films on AISI 304L
845
Influence of oxidation treatment on fatigue and fatigue-induced damage of commercially pure titanium
846
Influence of oxidation upon the CO2 capture performance of a phenolic-resin-derived carbon
847
Influence of oxidation, hydroxymethylation and sulfomethylation on the physicochemical properties of calcium lignosulfonate
848
Influence of oxidation–reduction treatment on activity and selectivity of Re supported on γ-alumina Original Research Article
849
Influence of oxidation–reduction treatment on activity of Re/γ-Al2O3 catalyst diluted with γ-alumina Original Research Article
850
Influence of oxidation-reduction treatment on dispersion of rhenium supported on γ-Al2O3 Original Research Article
851
Influence of oxidation–reduction treatment on the microstructure of Co/SiO2 catalyst Original Research Article
852
Influence of oxidative and osmotic stresses on the structure of the cell wall mannan of Candida albicans serotype A Original Research Article
853
Influence of oxidative browning inhibitors and isolation techniques on sweet potato protein recovery and composition
854
Influence of oxidative environments on damage in c/epoxy laminates subjected to thermal cycling
855
Influence of oxidative stress and metabolic adaptation on PON1 activity and MDA level in transition dairy cows
856
Influence of oxidative stress on the development of collateral circulation in total coronary occlusions
857
Influence of oxide chemistry of feedstock on cold sprayed Cu coatings
858
Influence of oxide films on primary water stress corrosion cracking initiation of alloy 600
859
Influence of oxide layer morphology on hydrogen concentration in tin and niobium containing zirconium alloys after high temperature steam oxidation
860
Influence of oxide phase formation on the tribological behaviour of Ti–Al–V–N coatings
861
Influence of oxide structure on the elevated temperature pitting behaviour of Fe-Cr-Ni alloys Original Research Article
862
Influence of oxides of the rare earth elements (La2O3, CeO2) on the thermal stability of highly dispersed aluminum oxide
863
INFLUENCE OF OXIDES OF THE RARE EARTH ELEMENTS (La2O3, CeO2) ON THE THERMAL STABILITY OF HIGHLY DISPERSED ALUMINUM OXIDE
864
Influence of oxidized low-density lipoproteins (LDL) on the viability of osteoblastic cells
865
Influence of oxidized polyethylene wax (OPW) on the mechanical, thermal, morphological and biodegradation properties of PHB/ LDPE blends
866
Influence of oxidized starch on the properties of thermoplastic starch
867
Influence of oxidizing and reducing treatments on the metal–metal interactions and on the activity for nitrate reduction of a Pt-Cu bimetallic catalyst Original Research Article
868
Influence of oxygen adsorption and diffusion on the overlapping of intergranular potential barriers in SnO2 thick films
869
Influence of oxygen and argon plasma treatments on the chemical structure and redox state of oxide covered iron
870
Influence of oxygen and carbon dioxide on the electrochemical stability of poly(3,4-ethylenedioxythiophene) used as ion-to-electron transducer in all-solid-state ion-selective electrodes
871
Influence of oxygen and carbon on performance of superpermeable membranes
872
Influence of oxygen and carbon on the generation and annihilation of radiation defects in silicon
873
Influence of oxygen and carbon on the generation and annihilation of radiation defects in silicon
874
Influence of oxygen and moisture content on electron life time in helium–isobutane gas mixtures
875
Influence of oxygen and moisture content on electron life time in helium–isobutane gas mixtures
876
Influence of oxygen and nitrogen on point defect aggregation in silicon single crystals
877
Influence of oxygen and nitrogen on point defect aggregation in silicon single crystals
878
Influence of oxygen and oxidant on corrosion inhibition of cysteine self-assembled membranes for copper
879
Influence of oxygen and pH on the selective oxidation of ethanol on Pd catalysts
880
Influence of oxygen and post deposition annealing on the electrical properties of MnPc and MnPcCl Schottky barrier devices
881
Influence of oxygen and promoting effect of barium on the reduction of NOx by ethanol on Pd/ZrO2 catalyst
882
Influence of oxygen argon ratio on the structural, electrical, optical and thermoelectrical properties of Al-doped ZnO thin films
883
Influence of oxygen atmosphere on crystallization and properties of LiNbO3 thin films
884
Influence of oxygen backgrounds on hydrogen sensing with SnO2 nanomaterials
885
Influence of oxygen concentration on the kinetics of cellulose wadding degradation
886
Influence of oxygen content in phase selection during quenching of Zr80Pt20 melt spun ribbons
887
Influence of oxygen content on microstructure and mechanical properties of Ti–Nb–Ta–Zr alloy
888
Influence of oxygen content on structure and properties of multi-element AlCrSiON oxynitride thin films
889
Influence of oxygen content on the 1.54 μm luminescence of Er-doped amorphous SiOx thin films
890
Influence of oxygen content on the forging response of equiaxed (α+β) preform of Ti–6Al–4V: commercial vs. ELI grade
891
Influence of oxygen content on the magnetic properties of B-site deficient lanthanum manganites
892
Influence of oxygen content on the mechanical properties of hexagonal Ti—First principles calculations
893
Influence of oxygen content on the reduction of the ordering temperature of L1/sub 0/ FePtCu alloy
894
Influence of oxygen content on the structural and sensing characteristics of Y2O3 sensing membrane for pH-ISFET
895
Influence of oxygen content on the structural and sensing characteristics of Y2O3 sensing membrane for pH-ISFET
896
Influence of oxygen deficiencies and hydrogen-loading on defect luminescence in irradiated Ge-doped silica glasses
897
Influence of oxygen desorption on in situ analysis of the surface composition during bombardment of Si
898
Influence of oxygen dissolution history on reconstruction behavior of a stepped metal surface
899
Influence of oxygen doping on the photoconductivity of π-conjugated molecules
900
Influence of oxygen exclusion and temperature on pathogenic bacteria levels and sensory characteristics of packed ostrich steaks throughout refrigerated storage
901
Influence of oxygen flow on crystallization and morphology of PLZT thin films
902
Influence of oxygen fugacity on mineral compositions in peralkaline melts: The Katzenbuckel volcano, Southwest Germany
903
Influence of oxygen fugacity on the electrical conductivity of hydrous olivine: Implications for the mechanism of conduction
904
Influence of oxygen growth pressure on laser ablated Cr-doped In2O3 thin films
905
Influence of oxygen introduced in TiFe-based hydride forming alloy on its morphology, structural and hydrogen sorption properties
906
Influence of oxygen ion drift on a negative difference behavior in a reset process of bipolar resistive switching
907
Influence of oxygen mobility on catalytic activity of La–Sr–Mn–O composites in the reaction of high temperature N2O decomposition
908
Influence of Oxygen Nonstoichiometry on the Spectral Properties of Solid Solutions LaNb2-2xTa2xVO9-DELTA (x= 0–0.4) and LaTa2-2xNb2xVO9-DELTA (x=0–0.1)
909
Influence of oxygen on adsorption of elemental mercury vapors onto activated carbon
910
Influence of oxygen on defect densities in nanocrystalline Si
911
Influence of oxygen on heterotrophic reworking of sedimentary lipids at the Pakistan margin
912
Influence of oxygen on microstructure and mechanical properties of directionally solidified Ti–47Al–2Cr–2Nb alloy
913
Influence of oxygen on solidification behaviour of cast TiAl-based alloys
914
Influence of oxygen on surface reconstruction and growth of (0 0 1) vanadium
915
Influence of oxygen on the carbide formation on tungsten
916
Influence of oxygen on the crystallization behavior of Zr65Cu27.5Al7.5 and Zr66.7Cu33.3 metallic glasses Original Research Article
917
Influence of oxygen on the devitrification of Zr–Ti–Nb–Cu–Ni–Al metallic glasses
918
Influence of oxygen on the formation of cubic boron nitride by r.f. magnetron sputtering
919
INFLUENCE OF OXYGEN ON THE GASEOUS DEPHOSPHORIZATION OF METALS IN PLASMA-ARC HEATING
920
Influence of oxygen on the growth of carbon nanotubes by the SiC surface decomposition method
921
Influence of oxygen on the joining between copper and aluminium nitride
922
Influence of oxygen on the mass diffusion of Ag on Cu(110): a laterally resolved photoemission study
923
Influence of oxygen on the microstructural growth of SiC nanowires
924
Influence of oxygen on the paramagnetic properties of polypyrrole layers
925
Influence of oxygen on the process of formation of silver nanoparticles during citrate/borohydride synthesis of silver sols
926
Influence of oxygen on the production of higher fullerenes
927
Influence of oxygen on the recombination strength of dislocations in silicon wafers
928
Influence of oxygen on the recombination strength of dislocations in silicon wafers
929
Influence of oxygen on the sputtering of aluminum oxide for the surface passivation of crystalline silicon
930
Influence of oxygen on the thermal behavior of the ZrO2–Fe2O3 system
931
Influence of oxygen partial pressure on optoelectrical properties of aluminum-doped CdO thin films
932
Influence of oxygen partial pressure on structural, transport and magnetic properties of Co doped films
933
Influence of oxygen partial pressure on the oxidation behaviour of TiAl at 1300 K
934
Influence of oxygen partial pressure on the oxidation behaviour of TiAl at 1300 K
935
Influence of oxygen partial pressure on the properties of pulsed laser deposited nanocrystalline zirconia thin films
936
Influence of oxygen partial pressure on the properties of undoped InOx films deposited at room temperature by rf-PERTE
937
Influence of oxygen partial pressure on the wetting of SiC by a Co–Si alloy
938
Influence of oxygen partial pressure on transparency and conductivity of RF sputtered Al-doped ZnO thin films
939
Influence of oxygen plasma treatment on boron carbon nitride film composition
940
Influence of oxygen plasma treatment on properties of ZrO2 films prepared by e-beam evaporation techniques
941
Influence of oxygen postannealing on the magnetic and electrical properties of La0.67Ca0.33MnO3–δ epitaxial films
942
Influence of oxygen postannealing on the magnetic and electrical properties of La0.67Ca0.33MnO3–δ epitaxial films
943
Influence of oxygen post-treatment on laser-induced damage of antireflection coatings prepared by electron-beam evaporation and ion beam assisted deposition
944
Influence of oxygen pressure and substrate temperature on the properties of aluminum fluoride thin films
945
Influence of oxygen pressure on combustion synthesis of zinc ferrite powders
946
Influence of oxygen pressure on combustion synthesis of ZnFe2O4
947
Influence of oxygen pressure on elastic strain and excitonic transition energy of ZnO epilayers prepared by pulsed laser deposition
948
Influence of oxygen pressure on Nd:LuVO4 films grown by pulsed laser deposition
949
Influence of oxygen reduction and hydrogen evolution in the gold and silver direct electrodeposition process from thiourea solutions in a filter press type reactor
950
Influence of oxygen supply on heptadecane mineralization by Pseudomonas nautica
951
Influence of oxygen supply rates on performances of catalytic membrane reactors: Application to the oxidative coupling of methane
952
Influence of oxygen tension on CD133 phenotype in human glioma cell cultures
953
Influence of oxygen treatment on electric double-layer capacitance of activated carbon fabrics Original Research Article
954
Influence of oxygen vacancies on optical properties of anatase TiO2 thin films
955
Influence of Oxygen, Carbon Dioxide, and Degree of Cutting on the Respiration Rate of Rutabaga
956
Influence of oxygenated additives on the NOxOUT process efficiency☆
957
Influence of oxygenates on fine particle and regulated emissions from a diesel engine
958
Influence of oxygen-containing functional groups on active carbon adsorption of selected organic compounds
959
Influence of oxygen-containing surface groups on the activity and selectivity of carbon nanofiber-supported ruthenium catalysts in the hydrogenation of cinnamaldehyde
960
Influence of oxygen-enrichment air intake and bioethanol–gasoline blends on exhaust emissions and fuel consumption of gasoline engine
961
Influence of oxytetracycline and oxolinic acid on the immune response of rainbow trout (Oncorhynchus mykiss)
962
Influence of oxytocin on prostaglandin E, intracellular calcium, and cyclic adenosine monophosphate in human amnion–derived (WISH) cells
963
Influence of oyster culture practices and environmental conditions on the ecological status of intertidal mudflats in the Pertuis Charentais (SW France): A multi-index approach
964
Influence of ozonation on extractability of Pb and Zn from contaminated soils
965
Influence of ozonation on the in vitro mutagenic and toxic potential of secondary effluents
966
Influence of ozone and ethylenediurea (EDU) on growth and yield of bean (Phaseolus vulgaris L.) in open-top field chambers Original Research Article
967
Influence of ozone initiated processing on the toxicity of aerosol particles from small scale wood combustion
968
Influence of ozone pollution and climate variability on net primary productivity and carbon storage in Chinaʹs grassland ecosystems from 1961 to 2000
969
Influence of ozone precursors and PM10 on the variation of surface O3 over Kannur, India
970
Influence of ozone pre-treatment on sludge anaerobic digestion: Removal of pharmaceutical and personal care products Original Research Article
971
Influence of ozone treatment on change of structural–chemical parameters of coal vitrinites and their reactivity during the thermal liquefaction process
972
Influence of Ozone, Hydrogen Peroxide, or Salt on Microbial Profile, TBARS and Color of Channel Catfish Fillets
973
Influence of ozone, relative humidity, and flow rate on the deposition and oxidation of sulfur dioxide on yellow sand
974
Influence of P gettering thermal step on light-induced degradation in Cz Si
975
Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations
976
Influence of P/M process parameters on microstructure and hardness of Al-Al3Ni composites synthesized in-situ via reactive sintering
977
Influence of P/T conditions on the style of normal fault initiation and growth in limestones from the SE-Basin, France
978
Influence of P2O5 and Al2O3 content on the structure of erbium-doped borosilicate glasses and on their physical, thermal, optical and luminescence properties
979
Influence of P2O5 content on the structure of SiO2-Na2O-CaO-P2O5 bioglasses by 29Si and 31P MAS-NMR
980
Influence of P3HT concentration on morphological, optical and electrical properties of P3HT/PS and P3HT/PMMA binary blends
981
Influence of p53 (rs1625895) polymorphism in kidney transplant recipients
982
Influence of p53 and bcl-2 on chemosensitivity in benign and malignant prostatic cell lines
983
Influence of PA6 nanocomposite films on the stability of vacuum-aged beef loins during storage in modified atmospheres
984
Influence of Pacific Ocean multidecadal variability on the distributional properties of hydrological variables in north-central Chile
985
Influence of Pacific on Southern Indian Ocean Rossby Waves
986
Influence of package, type of apple juice and temperature on the production of patulin by Byssochlamys nivea and Byssochlamys fulva
987
Influence of packaging conditions on microbial and lipid oxidation in lamb meat
988
Influence of packaging conditions on the properties of gamma-irradiated UHMWPE following accelerated ageing and shelf ageing
989
Influence of packaging geometry and material properties on the oxidation kinetic of bottled virgin olive oil Original Research Article
990
Influence of packaging material on pomegranate juice colour and bioactive compounds, during storage
991
Influence of packaging on spoilage yeast population in minimally processed orange slices
992
Influence of packing density on performance of porous wick for LHP
993
Influence of Paclobutrazol on Vegetative Growth, Nutrient Content, Flowering and Yield of Mango (Mangifera indica L.) and Its Residual Dynamics
994
Influence of pad compliance on nonlinear dynamic characteristics of tilting pad journal bearings
995
Influence of pad span on fretting fatigue behaviour of AISI 304 stainless steel
996
Influence of pad–pivot friction on tilting pad journal bearing
997
Influence of pain and gender on impact loading during walking: A randomised trial
998
Influence of pain treatment by epidural fentanyl and bupivacaine on homing of opioid-containing leukocytes to surgical wounds
999
Influence of paints on drying and salt distribution processes in porous building materials
1000
Influence of paleorelief on the Mid-Miocene climate variation in southeastern Washington, northeastern Oregon, and western Idaho, USA