<< مقالات لاتين >>
<< بر اساس عنوان >>
1
A thermoacoustic refrigerator driven by a low temperature-differential, high-efficiency multistage thermoacoustic engine
2
A thermoacoustically driven pulse tube refrigerator capable of working below 120 K Original Research Article
3
A thermoanalytical study of the co-pyrolysis of coal-tar pitch and petroleum pitch
4
A thermoanalytical study of unusual adrenaline complexes
5
A thermoanalytical study of zinc methanesulfonate urea, imidazole and 2,2-dithiobis(pyridine-N-oxide) complexes
6
A thermoanalytical study on the oxidation of ZrC and HfC powders with formation of carbon
7
A thermobaric instability of Lagrangian vertical coordinate ocean models
8
A thermobarometer for sphene (titanite)
9
A thermochemical approach for calcium phosphate precipitation modeling in a pellet reactor
10
A thermochemical approach for the determination of convection heat transfer coefficients in a gun barrel
11
A thermochemical concept-based equation to estimate waste combustion enthalpy from elemental composition☆
12
A Thermo-Chemical Reactor for analytical atomic spectrometry
13
A Thermo-Chemical Reactor for analytical atomic spectrometry
14
A thermochemical study of hexaoxoiodata(VII) hydrates of the type M2HIO6·nH2O, where M=Cd, Cu, Zn
15
A thermochemical study of K2M(IO3)4·2H2O(M=Mg2+, Ni2+, Zn2+)
16
A thermochemical study of the reaction of CuCl2·2H2O with 8-hydroxyquinoline
17
A thermochemical study of the reactions of 8-hydroxyquinoline with Co(Ac)2·4H2O and Zn(Ac)2·2H2O
18
A thermochemical study of the solid-state coordination reactions of two α-amino acids with copper(II) acetate
19
A thermochemical study of thiol collector surface reactions on galena
20
A thermochemical study on the coordination complex of cerium trichloroacetic acid with 8-hydroxyquinoline
21
A thermochemical study on the coordination complex of lanthanum trichloroacetic acid with 8-hydroxyquinoline
22
A Thermochromic Liquid Crystals Image Analysis technique to investigate temperature polarization in spacer-filled channels for Membrane Distillation
23
A thermo-conductive approach to explain the origin of lamellar twisting in banded spherulites
24
A thermodynamic analysis for heterogeneous boiling nucleation on a superheated wall
25
A thermodynamic analysis for heterogeneous boiling nucleation under an external electric field
26
A thermodynamic analysis of a biogas-fired integrated gasification steam injected gas turbine (BIG/STIG) plant
27
A thermodynamic analysis of a novel high efficiency reciprocating internal combustion engine—the isoengine
28
A thermodynamic analysis of a steel production step carried out in the ladle furnace
29
A thermodynamic analysis of electron production during syngas fermentation
30
A thermodynamic analysis of energy eigenvalues
31
A thermodynamic analysis of energy eigenvalues
32
A thermodynamic analysis of fibrillar polymorphism Original Research Article
33
A thermodynamic analysis of high temperature gas-cooled reactors for optimal waste heat recovery and hydrogen production
34
A thermodynamic analysis of hydrogen production by steam reforming of ethanol via response reactions
35
A thermodynamic analysis of hydrogen production by steam reforming of glycerol
36
A thermodynamic analysis of non-equilibrium heat conduction in a semi-infinite medium subjected to a step change in temperature
37
A thermodynamic analysis of refrigerants: Performance limits of the vapor compression cycle
38
A thermodynamic analysis of refrigerants: Possibilities and tradeoffs for Low-GWP refrigerants
39
A thermodynamic analysis of refueling of a hydrogen tank
40
A thermodynamic analysis of solid waste gasification in the Plasma Gasification Melting process
41
A thermodynamic analysis of the binding interaction between polysorbate 20 and 80 with human serum albumins and immunoglobulins: A contribution to understand colloidal protein stabilisation Original Research Article
42
A thermodynamic analysis of the brittleness of polycrystalline Ni3Al alloy
43
A thermodynamic analysis of the brittleness of polycrystalline Ni3Al alloy
44
A thermodynamic analysis of the Cu-Si system
45
A thermodynamic analysis of the Mo-V and Mo-V-C system
46
A thermodynamic analysis of the Mo-V and Mo-V-C system
47
A thermodynamic analysis of the reformer sponge iron cycle
48
A Thermodynamic analysis of the relationships between molecular size, hydrophobicity, aqueous solubility and octanol-water partitioning of organic chemicals
49
A thermodynamic analysis of the SO2/H2SO4 system in SO2-depolarized electrolysis
50
A Thermodynamic analysis of the system Fe-Ni-O
51
A Thermodynamic analysis of the system Fe-Ni-O
52
A thermodynamic analysis of the system LiAlSiO4-NaAlSiO4-Al2O3-SiO2-H2O based on new heat capacity, thermal expansion, and compressibility data for selected phases
53
A thermodynamic analysis of waste heat recovery from reciprocating engine power plants by means of Organic Rankine Cycles
54
A thermodynamic analysis on adsorption of estrogens in activated sludge process Original Research Article
55
A thermodynamic and crystallographic study of complexes of the highly preorganized ligand 8-hydroxyquinoline-2-carboxylic acid
56
A thermodynamic and experimental study of the conditions of thaumasite formation
57
A Thermodynamic and Kinetic Analysis of the Folding Pathway of an SH3 Domain Entropically Stabilised by a Redesigned Hydrophobic Core
58
A thermodynamic and kinetic study of the de- and rehydration of Ca(OH)2 at high H2O partial pressures for thermo-chemical heat storage
59
A thermodynamic and mechanical model for formation of the Solar System via 3-dimensional collapse of the dusty pre-solar nebula
60
A thermodynamic and spectrophotometric study of anion binding with a multifunctional dipyridine-based macrobicyclic receptor
61
A thermodynamic approach for advanced fuels of gas-cooled reactors
62
A thermodynamic approach for predicting the tendency of multicomponent metallic alloys for glass formation
63
A thermodynamic approach for the development of austenitic steels with a high resistance to hydrogen gas embrittlement
64
A thermodynamic approach to assess organic solute adsorption onto activated carbon in water Original Research Article
65
A thermodynamic approach to chemical vapor deposition of boron nitride thin films from borazine
66
A thermodynamic approach to fatigue damage accumulation under variable loading
67
A thermodynamic approach to ion flotation. I. Kinetics of cupric ion flotation with alkylsulfates
68
A thermodynamic approach to ion flotation. II. Metal ion selectivity in the SDS–Cu–Ca and SDS–Cu–Pb systems
69
A thermodynamic approach to modelling the economic order quantity
70
A thermodynamic approach to non-isothermal phase-field evolution in continuum physics
71
A thermodynamic approach to non-local damage modelling of concrete
72
A thermodynamic approach to proton conductivity in acid-doped polybenzimidazole
73
A thermodynamic approach to slowly sheared granular matter
74
A thermodynamic approach to study hydrogen-bonding interactions in solvent/solvent/polymer ternary systems
75
A thermodynamic approach to the boundary layer flow system
76
A Thermodynamic Approach to the Compromise Between Power and Efficiency in Muscle Contraction
77
A thermodynamic approach to the definition of the HAT cycle plant structure
78
A thermodynamic approach to the hydration of sulphate-resisting Portland cement
79
A thermodynamic approach to the viscous behaviour of glass-forming liquids
80
A thermodynamic approach to the viscous behaviour of glass-forming liquids
81
A thermodynamic approach with internal variables using Lagrange formalism. Part I: General framework
82
A thermodynamic approach with internal variables using Lagrange formalism. Part II. Continuous symmetries in the case of the time–temperature equivalence
83
A thermodynamic assessment of LiBH4
84
A thermodynamic assessment of Ni–Sb system
85
A thermodynamic assessment of Ni–Sb system
86
A thermodynamic assessment of the Au-Cu system
87
A thermodynamic assessment of the Au-Cu system
88
A thermodynamic assessment of the Bi–Mg–Sn ternary system
89
A thermodynamic assessment of the Cd–Mg system
90
A thermodynamic assessment of the copper–gallium system
91
A thermodynamic assessment of the copper–gallium system
92
A thermodynamic assessment of the Co–Sn system
93
A thermodynamic assessment of the Co–Sn system
94
A thermodynamic assessment of the Cr–Mo system using CE-CVM
95
A thermodynamic assessment of the Cu---Mg---Ni ternary system
96
A thermodynamic assessment of the CuMgNi ternary system
97
A thermodynamic assessment of the Fe-Pt system
98
A thermodynamic assessment of the Fe-Pt system
99
A thermodynamic assessment of the iron — Antimony system
100
A thermodynamic assessment of the iron — Antimony system
101
A thermodynamic assessment of the iron–lead binary system
102
A thermodynamic assessment of the nickel–lead system
103
A thermodynamic based higher-order gradient theory for size dependent plasticity
104
A thermodynamic basis for evaluating environmental policy trade-offs
105
A Thermodynamic Basis of DNA Sequence Selectivity by the ETS Domain of Murine PU.1
106
A thermodynamic benchmark for assessing an emergency drinking water device based on forward osmosis Original Research Article
107
A thermodynamic consistent damage and healing model for self healing materials
108
A thermodynamic constitutive model for stress induced phase transformation in shape memory alloys
109
A thermodynamic counterpart of the Axelrod model of social influence: The one-dimensional case
110
A thermodynamic criterion for designing superhard transition-metal borides with ultimate boron content
111
A thermodynamic criterion for predicting glass-forming ability in binary metallic glasses
112
A thermodynamic criterion for selection of working fluid for subcritical and supercritical domestic micro CHP
113
A Thermodynamic Database for Copper Smelting and Converting
114
A Thermodynamic Database for Copper Smelting and Converting
115
A thermodynamic description of the Al–Be system: Modeling and experiment
116
A thermodynamic description of the Al–Be system: Modeling and experiment
117
A thermodynamic description of the Al–Ca–Zn ternary system
118
A thermodynamic description of the Al–Ca–Zn ternary system
119
A thermodynamic description of the Al–Fe–Si system over the whole composition and temperature ranges via a hybrid approach of CALPHAD and key experiments
120
A thermodynamic description of the Al–Mo–Si system
121
A thermodynamic description of the CoCrTi ternary system over the entire composition and temperature range
122
A thermodynamic description of the Gd–Mg–Sm system
123
A thermodynamic description of the Gd–Mg–Sm system
124
A thermodynamic description of the Gd–Mg–Y system
125
A thermodynamic description of the Gd–Mg–Y system
126
A thermodynamic description of the Ge–Sr system acquired via a hybrid approach of CALPHAD and first-principles calculations
127
A thermodynamic description of the Ge–Sr system acquired via a hybrid approach of CALPHAD and first-principles calculations
128
A thermodynamic description of the glass transition: an exact one-dimensional example
129
A thermodynamic description of the melting process in nanometer-sized particles
130
A thermodynamic description of the Mg–Pr–Y system
131
A thermodynamic description of the Mg–Pr–Y system
132
A thermodynamic description of the Ni–Al–Cr–Re system
133
A thermodynamic description of the Ni–Al–Cr–Re system
134
A thermodynamic description of the Pd–Si–C system
135
A thermodynamic description of the system Pd–Rh–H–D–T Original Research Article
136
A Thermodynamic Equation of State For the Critical Region of Ethylene
137
A Thermodynamic Equilibrium Analysis on Oxidation of Methane to Higher Hydrocarbons
138
A Thermodynamic Equilibrium Analysis to Determine the Potential Sorbent Materials for the Control of Arsenic Emissions from Combustion Sources
139
A thermodynamic equilibrium comparison of the mobilities of trace elements when washed and unwashed coals are burnt under pf firing conditions
140
A Thermodynamic Estimation of the Chemical Vapor Deposition of Some Borides
141
A thermodynamic evaluation of the Co-Cr and the C-Co-Cr systems
142
A thermodynamic evaluation of the Co-Cr and the C-Co-Cr systems
143
A thermodynamic evaluation of the Fe–Cr–C system
144
A thermodynamic evaluation of the Mn-Si system
145
A thermodynamic evaluation of the Mn-Si system
146
A thermodynamic evaluation of the system Si-Sn
147
A thermodynamic evaluation of the system Si-Sn
148
A thermodynamic explanation for the Glänzel–Schubert model for the h-index
149
A thermodynamic explanation for the martensitic transformation of nanometer-sized γ-iron particles embedded in a copper matrix
150
A thermodynamic explanation for the martensitic transformation of nanometer-sized γ-iron particles embedded in a copper matrix
151
A thermodynamic explanation for the martensitic transformation of nanometer-sized γ-iron particles embedded in a copper matrix
152
A thermodynamic feasibility study of an Organic Rankine Cycle (ORC) for heavy-duty diesel engine waste heat recovery in off-highway applications
153
A thermodynamic finite-strain model for pseudoelastic shape memory alloys
154
A thermodynamic framework for constitutive modeling of time- and rate-dependent materials. Part I: Theory
155
A thermodynamic framework for constitutive modeling of time- and rate-dependent materials. Part II: Numerical aspects and application to asphalt concrete
156
A thermodynamic framework for fatigue crack growth in concrete
157
A Thermodynamic Investigation of the Interaction of Ferric (Fe3+) Ion with (100, 110) Pyrite and (001) Chalcopyrite Surfaces Using the Density Functional Theory Study
158
A thermodynamic investigation of the redox properties of ceria–titania mixed oxides Original Research Article
159
A thermodynamic investigation on chitosan–divalent cation interactions
160
A thermodynamic lattice gas model of Poiseuille flow
161
A thermodynamic method for the construction of a cohesive law from a nonlocal damage model
162
A thermodynamic model based on exergy flow for analysis and optimization of pulse tube refrigerators Original Research Article
163
A thermodynamic model for calculating nitrogen solubility, gas phase composition and density of the N2–H2O–NaCl system
164
A thermodynamic model for carbon trapping in lattice defects
165
A thermodynamic model for carbon trapping in lattice defects
166
A thermodynamic model for electrical current induced damage
167
A thermodynamic model for exergetic performance and optimization of a solar and biomass-fuelled multigeneration system
168
A thermodynamic model for Fe-Mg dioctahedral K white micas using data from phase-equilibrium experiments and natural pelitic assemblages
169
A thermodynamic model for hydrous silicate melts in the system NaAlSi3O8–KAlSi3O8–Si4O8–H2O
170
A thermodynamic model for ionic polymer–metal composites and finite volume-finite element solution
171
A thermodynamic model for LLE behavior of oil/brine/ionic-surfactant/alcohol co-surfactant systems for EOR processes
172
A thermodynamic model for magnetorheological fluids
173
A thermodynamic model for predicting mineral reactivity in supercritical carbon dioxide: I. Phase behavior of carbon dioxide–water–chloride salt systems across the H2O-rich to the CO2-rich regions
174
A thermodynamic model for predicting the stability of thaumasite
175
A thermodynamic model for shear-induced concentration banding and macromolecular separation
176
A thermodynamic model for solid solutions and its application to the C–Fe–Co, C–Fe–Ni and Mn–Cr–Pt solid dilutions
177
A thermodynamic model for solid solutions and its application to the C–Fe–Co, C–Fe–Ni and Mn–Cr–Pt solid dilutions
178
A thermodynamic model for ternary mixture systems—Gas blends in a polymer melt
179
A thermodynamic model for the growth of buried oxide layers by thermal oxidation
180
A thermodynamic model for the growth of buried oxide layers by thermal oxidation
181
A thermodynamic model for the nanocrystal to glass transition of intermetallic compounds subjected to high deformation by mechanical attrition—Application to L12 phases
182
A thermodynamic model for the phase behavior of salt-polymer aqueous two-phase systems
183
A thermodynamic model for the prediction of pore water composition of clayey rock at 25 and 80 °C — Comparison with results from hydrothermal alteration experiments
184
A thermodynamic model for the solubility of barite and celestite in electrolyte solutions and seawater to 200°C and to 1 kbar
185
A thermodynamic model for wax deposition phenomena
186
A thermodynamic model of amorphous silicates
187
A thermodynamic model of amorphous silicates
188
A thermodynamic model of dissolution and precipitation of calcium silicate hydrates
189
A thermodynamic model of Fe–Cr spinels
190
A thermodynamic model of freshwater Antarctic lake ice
191
A thermodynamic model of freshwater Antarctic lake ice
192
A thermodynamic model of high temperature lava vaporization on Io
193
A thermodynamic model of physical gels
194
A thermodynamic model of the sympathetic and parasympathetic nervous systems
195
A thermodynamic model of the Z-phase Cr(V, Nb)N
196
A thermodynamic model of the Z-phase Cr(V, Nb)N
197
A thermodynamic model of thermal end elastic properties of curium
198
A thermodynamic model of turbulent motions in a granular material
199
A thermodynamic modeling of the Cr–Nb–Ni system
200
A thermodynamic modeling of the Cr–Nb–Ni system
201
A thermodynamic modeling of the Cu–Pd system
202
A thermodynamic modeling of the Cu–Pd system
203
A thermodynamic modeling of the Pd–Ti system
204
A thermodynamic modelling of the Ba–Pb system
205
A thermodynamic modelling of the Ba–Pb system
206
A Thermodynamic Optimization Analysis of a Possible Relation between the Parameters that Determine the Energetics of Muscle Contraction in Steady State
207
A thermodynamic perspective on food webs: Quantifying entropy production within detrital-based ecosystems
208
A Thermodynamic Property Model for Fluid Phase Hydrogen Sulfide
209
A Thermodynamic Property Model for Fluid-Phase Isobutane
210
A Thermodynamic Property Model for Fluid-Phase Propane
211
A Thermodynamic Property Model for the Binary Mixture of Methane and Hydrogen Sulfide
212
A thermodynamic reassessment of the Al–Y system
213
A thermodynamic reassessment of the Al–Y system
214
A thermodynamic reassessment of the Ca–Pb system
215
A thermodynamic reassessment of the Ca–Pb system
216
A thermodynamic reassessment of the La–Sn system
217
A thermodynamic reassessment of the La–Sn system
218
A thermodynamic reassessment of the Si–Sr system
219
A thermodynamic re-modeling of the Co-Fe-Gd system
220
A thermodynamic review on solar box type cookers
221
A thermodynamic signature for drug–DNA binding mode
222
A thermodynamic study for the optimization of stable operation of free piston Stirling engines
223
A thermodynamic study of 1,4-dioxane across cellulose acetate membrane under different conditions
224
A Thermodynamic Study of BaO-BaF2- Cr2O3 System Fluxes Used for Dephosphorization of Chromium-Containing Iron Melts
225
A Thermodynamic Study of BaO-BaF2- Cr2O3 System Fluxes Used for Dephosphorization of Chromium-Containing Iron Melts
226
A Thermodynamic Study of Complex Formation between 15-Crown-5 with Mg2+, Ca2+, Sr2+ and Ba2+ in Acetonitrile Methanol Binary Mixtures Using Conductometric Method
227
A thermodynamic study of phase equilibria in the Sn-Bi-Pb solder system
228
A thermodynamic study of phase equilibria in the Sn-Bi-Pb solder system
229
A thermodynamic study of retention of poly(ethylene glycol)s in liquid adsorption chromatography on reversed phases
230
A thermodynamic study of struvite + water system
231
A Thermodynamic Study of the Charge Transfer Complexes of C60 with some Crown Ethers
232
A thermodynamic study of the hydrogenation of the pseudo-binary Mg6Pd0.5Ni0.5 intermetallic compound
233
A Thermodynamic Study of the Interaction between Urease and Copper Ions
234
A Thermodynamic Study of the Interactions between Acetamide Derivatives and PCA-PEG-PCA Copolymers: ONIOM Calculations
235
A thermodynamic study of the lipase-catalyzed transesterification of benzyl alcohol and butyl acetate in supercritical carbon dioxide media
236
A thermodynamic study of the Pu–Am–O system
237
A thermodynamic study of the redox properties of supported Co particles Original Research Article
238
A thermodynamic study of two anionic amphiphilic penicillins in aqueous solution by ultrasound speed measurements
239
A thermodynamic study on binary and ternary mixtures of acetonitrile, water and butyl acetate
240
A Thermodynamic Study on Nano-graphene Interaction with the Amino acid Phenylalanine in Acidic and Alkaline conditions at different temperatures
241
A thermodynamic theory for dislocation cell formation and misorientation in metals Original Research Article
242
A thermodynamic theory of short-term and creep rupture strength of materials
243
A thermodynamic theory of supercooled liquids
244
A Thermodynamic Theory of Thermoelastic and Viscoanelastic Solids with Non-Euclidean Structure
245
A thermodynamic, environmental and material flow analysis of the Italian highway and railway transport systems
246
A thermodynamical gradient theory for deformation and strain localization of porous media
247
A thermodynamical model for the nucleation of mechanical twins in TiAl Original Research Article
248
A thermodynamical model of non-newtonian fluid behavior
249
A thermodynamical study of the clockwork hypothesis proposed by E. Schrödinger Original Research Article
250
A thermodynamically and microscopically motivated constitutive model for piezoceramics
251
A thermodynamically and variationally consistent class of damage-type cohesive models
252
A thermodynamically consistent and fully conservative treatment of contact discontinuities for compressible multicomponent flows
253
A thermodynamically consistent approach to microplane theory. Part I. Free energy and consistent microplane stresses
254
A thermodynamically consistent approach to microplane theory. Part II. Dissipation and inelastic constitutive modeling
255
A thermodynamically consistent constitutive theory for fluids
256
A thermodynamically consistent explicit competitive adsorption isotherm model based on second-order single component behaviour
257
A thermodynamically consistent formulation of magnetoporoelasticity
258
A thermodynamically consistent formulation of nonlocal and gradient plasticity
259
A thermodynamically consistent large deformation elastic–viscoplastic model with directional tensile failure
260
A thermodynamically consistent model for cavitating flows of compressible fluids
261
A THERMODYNAMICALLY CONSISTENT MODEL FOR HYSTERETIC MATERIALS
262
A thermodynamically consistent nonlocal formulation for damaging materials
263
A thermodynamically consistent numerical method for a phase field model of solidification
264
A thermodynamically consistent surface reaction mechanism for CO oxidation on Pt
265
A thermodynamically consistent, nonlinear viscoelastic approach for modeling glassy polymers
266
A thermodynamically motivated implicit gradient damage framework and its application to brick masonry cracking Original Research Article
267
A thermodynamically self-consistent quantum statistical theory of the crystalline state
268
A thermodynamically self-consistent statistical theory of the crystalline state
269
A thermodynamically stable La2NiO4+δ/ Gd0.1Ce0.9O1.95 bilayer oxygen transport membrane in membrane-assisted water splitting for hydrogen production
270
A thermodynamically-consistent 3 D constitutive model for shape memory polymers
271
A thermodynamic-consistent model describing growth and remodeling phenomena
272
A thermodynamic-like approach for the study of probabilistic systems
273
A thermodynamic-like characterization of Colombia’s presidential elections in 2010, and a comparison with other Latin American countries
274
A thermodynamics based damage mechanics constitutive model for low cycle fatigue analysis of microelectronics solder joints incorporating size effects
275
A thermodynamics based damage mechanics model for particulate composites
276
A thermodynamics model for solder profile evolution Original Research Article
277
A thermodynamics model for the compression and expansion process during the engine’s motoring and a new method for the determination of TDC with simulation technique
278
A thermodynamics-based cohesive model for interface debonding and friction
279
A thermoeconomic analysis of a commercial aircraft environmental control system
280
A thermoeconomic analysis of a PV-hydrogen system feeding the energy requests of a residential building in an isolated valley of the Alps
281
A thermoeconomic analysis of biomass energy for trigeneration
282
A thermoeconomic model of a photovoltaic heat pump
283
A thermo-economical optimization of a domestic solar heating plant with seasonal storage
284
A THERMOELASTIC MODEL FOR IN-SITU CONSOLIDATION OF THERMOPLASTIC COMPOSITES
285
A thermo-elastic model with a single relaxation time of an unbounded medium heated by a heat supply and moving vertically
286
A Thermoelasticity Solution for Thick Cylinders Subjected to Thermo-Mechanical Loads under Various Boundary Conditions
287
A thermoelasticity solution of sandwich structures with functionally graded coating
288
A thermo-electrical problem with a nonlocal radiation boundary condition
289
A thermo-electro-mechanical coupling study of Csaw motions and an application to the ultrasonic spherical motors by TEM–FEM
290
A thermogenic hydrocarbon seep in shallow Adriatic Sea (Italy): Gas origin, sediment contamination and benthic foraminifera
291
A thermographic comparison study for the assessment of composite patches
292
A thermographic method for remaining fatigue life prediction of welded joints
293
A thermographic promenade through the Berlin Botanic Garden
294
A thermographic study of the on–off behavior of an all-refrigerator
295
A thermographic technique for the simultaneous estimation of in-plane and in-depth thermal diffusivities of TBCs
296
A thermogravimetric analysis (TGA) method developed for estimating the stoichiometric ratio of solid-state α-cyclodextrin-based inclusion complexes
297
A thermogravimetric analysis/mass spectroscopy study of the thermal and chemical stability of carbon in the Pt/C catalytic system Original Research Article
298
A thermo-gravimetric and microstructural study of the oxidation of Nbss/Nb5Si3-based in situ composites with Sn addition
299
A thermogravimetric investigation of alkylammonium intercalation into rectorite
300
A thermogravimetric method for studying the kinetics of enzyme catalysed reactions that produce a volatile co-product
301
A thermogravimetric model to predict yield product distribution in pyrolysis of agricultural biomass
302
A thermogravimetric study of refractory clays chlorination
303
A thermogravimetric study of structural changes of lime wood (Tilia cordata Mill.) induced by exposure to simulated accelerated UV/Vis-light
304
A thermogravimetric study of the adsorption of CO2 on zeolites synthesized from fly ash
305
A thermogravimetric study of the alunites of sodium, potassium and ammonium
306
A thermogravimetric study of the fluorination of zirconium and hafnium oxides with anhydrous hydrogen fluoride gas
307
A thermogravimetric study of the fluorination of zirconium and hafnium oxides with fluorine gas
308
A thermogravimetric study of the phase diagram of strontium cobalt iron oxide, SrCo0.8Fe0.2O3 − δ
309
A thermogravimetric study of the reactions of molybdenum disilicide with anhydrous hydrogen fluoride and fluorine
310
A thermogravimetric study of the reactions of tungsten disilicide with anhydrous hydrogen fluoride and fluorine
311
A thermogravimetric study on thermal degradation of polyethylene
312
A thermo-hydraulic analysis of the superconducting proposal for the TF magnet system of FAST
313
A thermo-hydro-mechano-chemical formulation for modeling water transport around a ventilated tunnel in an argillaceous rock
314
A thermokinetic description for grain growth in nanocrystalline materials Original Research Article
315
A thermokinetic description of nanoscale grain growth: Analysis of the activation energy effect Original Research Article
316
A Thermolabile Triosephosphate Isomerase from the Psychrophile Vibrio sp. Strain ANT-300
317
A thermoluminescence (TL) analysis of ceramics from cairns in Jordan: Using TL to integrate off-site features into regional chronologies
318
A thermoluminescence study on the state of Cl in ZnS:Ag by electron beam
319
A thermo-mechanical analysis of functionally graded beams via hierarchical modelling
320
A thermomechanical cohesive zone model for bridged delamination cracks
321
A thermo-mechanical cohesive zone model for solder joint lifetime prediction
322
A thermomechanical constitutive model for phase transformations in silicon under pressure and contact loading conditions
323
A thermo-mechanical continuum theory with internal length for cohesionless granular materials
324
A thermo-mechanical continuum theory with internal length for cohesionless granular materials
325
A thermo-mechanical continuum theory with internal length for cohesionless granular materials Part II. Non-equilibrium postulates and numerical simulations of simple shear, plane Poiseuille and gravity driven problems
326
A thermo-mechanical continuum theory with internal length for cohesionless granular materials Part I. A class of constitutive models
327
A thermomechanical crystal plasticity constitutive model for ultrasonic consolidation
328
A thermomechanical damage approach to constitutive models for rate-independent dissipative geomaterials
329
A thermo-mechanical fatigue damage model for variable temperature and loading amplitude conditions
330
A thermomechanical finite element for the analysis of rectangular laminated beams
331
A thermomechanical framework for constitutive models for rate-independent dissipative materials
332
A thermomechanical framework for rate-independent dissipative materials with internal functions
333
A thermomechanical hot channel approach for friction stir welding
334
A thermomechanical model for a 1-D shape memory alloy wire with propagating instabilitie
335
A THERMOMECHANICAL MODEL FOR THE ANALYSIS OF DISC BRAKE FRACTURE MECHANISMS
336
A thermomechanical model for the analysis of light alloy solidification in a composite mould
337
A thermo-mechanical model of horizontal subduction below an overriding plate
338
A thermo-mechanical model of horizontal subduction below an overriding plate
339
A thermo-mechanical model of packed-bed storage and experimental validation
340
A THERMOMECHANICAL MODEL OF SOLIDIFICATION ON A MOLD MOVING WITH CONSTANT VELOCITY
341
A THERMOMECHANICAL MODEL OF SOLIDIFICATION ON A PLANE WALL WITH A SINGLE ASPERITY OF ARBITRARY SHAPE
342
A thermomechanical model with microstructure evolution for aluminium alloy casting processes
343
A thermomechanical process to make iron aluminide (FeAl) sheet
344
A thermomechanical process to make iron aluminide (FeAl) sheet
345
A thermomechanical shear lag analysis of short fuzzy fiber reinforced composite containing wavy carbon nanotubes
346
A thermo-mechanical study of mode I, small-scale yielding crack-tip fields in glassy polymers
347
A thermomechanical study of the effects of mold topography on the solidification of Aluminum alloys
348
A thermo-mechanical treatment to improve the superelastic performances of biomedical Ti–26Nb and Ti–20Nb–6Zr (at.%) alloys
349
A thermo-mechanical viscoelastic analysis of orthotropic materials
350
A thermomechanically coupled material model for TRIP-steel
351
A thermomechanically coupled rolling problem with damage
352
A thermo-mechanically coupled test case for axi-symmetric ice sheet flow
353
A thermo-mechanically coupled theory for fluid permeation in elastomeric materials: Application to thermally responsive gels
354
A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation
355
A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: Applications
356
A thermomechanically coupled viscoelastic cohesive zone model at large deformation
357
A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition
358
A thermo-mechanically-coupled theory accounting for hydrogen diffusion and large elastic–viscoplastic deformations of metals
359
A thermometric approach to the determination of iron losses in single phase induction motors
360
A thermometric indicator method as a replacement for the filter paper spot test in the titration of clays using methylene blue
361
A thermophile under pressure: Transcriptional analysis of the response of Caldicellulosiruptor saccharolyticus to different H2 partial pressures
362
A thermophilic mini-chaperonin contains a conserved polypeptide-binding surface: combined crystallographic and NMR studies of the GroEL apical domain with implications for substrate interactions
363
A thermophilic α-galactosidase from Neosartorya fischeri P1 with high specific activity, broad substrate specificity and significant hydrolysis ability of soymilk
364
A thermophilic β-mannanase from Neosartorya fischeri P1 with broad pH stability and significant hydrolysis ability of various mannan polymers
365
A thermo-physical model for hydrogen–iodide vapor–liquid equilibrium and decomposition behavior in the iodine–sulfur thermo-chemical water splitting cycle
366
A Thermophysical Property Databank for Technically Important Gases and Liquids
367
A Thermopiezoelectric Mixed Variational Theorem for smart multilayered composites
368
A thermoplastic forming map of a Zr-based bulk metallic glass Original Research Article
369
A thermo-plastic/viscoplastic damage model for geomaterials
370
A thermo-responsive affinity membrane with nano-structured pores and grafted poly(N-isopropylacrylamide) surface layer for hydrophobic adsorption
371
A thermoresponsive, microtextured substrate for cell sheet engineering with defined structural organization
372
A thermoreversible hydrogel as a biosynthetic bandage for corneal wound repair
373
A thermorheological investigation into the gelation and phase separation of hydroxypropyl methylcellulose aqueous systems
374
A thermo-rheological study on the structure property relationships in the reinforcement of nylon 6–POSS blends
375
A thermosensitive carrageenan-based polymer: Synthesis, characterization and interactions with a cationic surfactant
376
A thermo-sensitive imaging coating derived from polymer nanoparticles containing infrared absorbing dye
377
A thermo-sensitive release system based on polymeric membrane for transdermal delivery of doxycycline HCl
378
A thermosensory pathway controlling sympathetic and shivering thermogenesis
379
A thermostable alkaline active endo-β-1-4-xylanase from Bacillus halodurans S7: Purification and characterization
380
A Thermostable Alkaline Protease from a Moderately Halo-alkalithermotolerant Bacillus Subtilis Strain SH1
381
A thermostable and organic-solvent tolerant esterase from Pseudomonas putida ECU1011: Catalytic properties and performance in kinetic resolution of α-hydroxy acids
382
A thermostable azo-linker for reversible photoregulation of DNA replication
383
A thermostable exo-β-fructosidase immobilised through rational design
384
A thermostable high pressure xenon gamma-ray detector for monitoring concentration of KCl during fertilizer manufacturing
385
A thermostable high pressure xenon gamma-ray detector for monitoring concentration of KCl during fertilizer manufacturing
386
A thermostable humic acid peroxidase from Streptomyces sp. strain AH4: Purification and biochemical characterization
387
A thermostable promiscuous glucose-1-phosphate uridyltransferase from Helicobacter pylori for the synthesis of nucleotide sugars
388
A Thermostable Serine Protease By Aspergillus parasiticus TEM Have Promising Activity In Enzymatic Dehairing Process
389
A Thermostable Sugar-Binding Protein from the Archaeon Pyrococcus horikoshii as a Probe for the Development of a Stable Fluorescence Biosensor for Diabetic Patients
390
A thermostable α-amylase from a moderately thermophilic Bacillus subtilis strain for starch processing Original Research Article
391
A thermostat chip of indium tin oxide glass substrate for static polymerase chain reaction and in situ real time fluorescence monitoring Original Research Article
392
A thermostated electrochemical flow cell with a coupled bismuth film electrode for square-wave anodic stripping voltammetric determination of cadmium(II) and lead(II) in natural, wastewater and tap water samples
393
A thermostatistical approach to protein structures
394
A thermostatistical theory of low and high temperature deformation in metals
395
A thermotolerant and cold-active mannan endo-1,4-β-mannosidase from Aspergillus niger CBS 513.88: Constitutive overexpression and high-density fermentation in Pichia pastoris
396
A thermo-viscoelastic analysis of process-induced residual stress in fibre-reinforced polymer–matrix composites
397
A thermoviscoelastic beam model for brakes
398
A thermoviscoelastic beam with a tip body
399
A thermoviscoelastic problem of an infinite medium with a spherical cavity using generalized theory of thermoelasticity
400
A thermoviscoelastic problem with damage
401
A thermo-viscoelastic–viscoplastic–viscodamage constitutive model for asphaltic materials
402
A thermo-viscoplastic constitutive model for FCC metals with application to OFHC copper
403
A thermo-viscoplastic constitutive model for FCC metals with application to OFHC copper
404
A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel
405
A thermo-XRD study of Al-pillared smectites differing in source of charge, obtained in dialyzed, non-dialyzed and washed systems
406
A theropod tooth assemblage from the lower Aguja Formation (early Campanian) of West Texas, and the roles of small theropod and varanoid lizard mesopredators in a tropical predator guild
407
A thiazine-S-oxide, Staudinger/aza-Wittig based synthesis of benzodiazepines and benzothiadiazepines
408
A thick composite-beam model for delamination prediction by the use of neural networks
409
A thick hierarchical rutile TiO2 nanomaterial with multilayered structure
410
A thick plate model for bending and twisting of CANDU fuel endplates Original Research Article
411
A thick TiN/TiCN multilayer film by DC magnetron sputtering
412
A thick-interface model for diffusive and massive phase transformation in substitutional alloys Original Research Article
413
A thickness-independent nonlocal shell model for describing the stability behavior of carbon nanotubes under compression
414
A thick-restarted block Arnoldi algorithm with modified Ritz vectors for large eigenproblems
415
A thick-skulled theropod (Dinosauria, Saurischia) from the Upper Cretaceous of Morocco with implications for carcharodontosaurid cranial evolution
416
A thienylene-phenylene copolymer with di(ethylene oxide) side chains and its use in light emitting diodes
417
A thin aluminum window sample chamber for high and low temperatures
418
A thin aluminum window sample chamber for high and low temperatures
419
A thin cover glass chip for contactless conductivity detection in microchip capillary electrophoresis
420
A thin elastic core can control large-scale patterns of lithosphere shortening
421
A thin emulsion spectrometer using a compact permanent magnet
422
A thin emulsion spectrometer using a compact permanent magnet
423
A thin film dryer approach for the determination of water diffusion coefficients in viscous products
424
A thin film silicon anode for Li-ion batteries having a very large specific capacity and long cycle life
425
A thin float glass MRPC for the outer region of CBM-TOF wall
426
A thin float glass MRPC for the outer region of CBM-TOF wall
427
A Thin Front Model Applied to Flame Propagation in Tubes
428
A Thin Gap Gas Chamber with on-board electronics for DELPHI: an integrated detector
429
A Thin Gap Gas Chamber with on-board electronics for DELPHI: an integrated detector
430
A thin gold coated hydrogen heat pipe-cryogenic target for external experiments at COSY Original Research Article
431
A thin layer chromatographic method for determining the enzymatic activity of peroxidases catalyzing the two-electron reduction of lipid hydroperoxides
432
A thin layer drying model of parboiled wheat Original Research Article
433
A Thin Layer Imaging with the Total Internal Reflection Fluorescence Microscopy
434
A thin layer-based amperometric enzyme immunoassay for the rapid and sensitive diagnosis of respiratory syncytial virus infections
435
A thin near hexagon with 50 points
436
A Thin Phenotype Is Protective for Impaired Glucose Tolerance and Related to Low Birth Weight in Mice
437
A thin predominantly cold-based Late Miocene East Antarctic ice sheet inferred from glaciovolcanic sequences in northern Victoria Land, Antarctica
438
A thin slice perspective on the accuracy of first impressions
439
A thin target scheme for the muon source
440
A thin target scheme for the muon source
441
A thin-film sensing element for ozone, humidity and temperature
442
A thin-film solar cell of high-quality -FeSi2/Si heterojunction prepared by sputtering
443
A thin-film transistor based acetylcholine sensor using self-assembled carbon nanotubes and SiO2 nanoparticles
444
A Thinking Process For Designing a Better Research Study
445
A Thin-Layer Amperometric Sensor for Hydrogen Sulfide: The Use of Microelectrodes To Achieve a Membrane-Independent Response for Clark-Type Sensors
446
A thin-layer contactless conductivity cell for detection in flowing liquids Original Research Article
447
A Thin-Layer Electrochemical Flow Cell Coupled On-Line with Electrospray-Mass Spectrometry for the Study of Biological Redox Reactions
448
A Thin-Layer Electrochemical Flow Cell Coupled On-Line with Electrospray-Mass Spectrometry for the Study of Biological Redox Reactions
449
A Thinning Method of Linear And Planar Array Antennas To Reduce SLL of Radiation Pattern By GWO And ICA Algorithms
450
A thinning method using weight limitation for air-shower simulations
451
A thin-rod approximation for the improved modeling of bare and insulated cylindrical antennas using the FDTD method
452
A thin–tall Boolean algebra which is isomorphic to each of its uncountable subalgebras
453
A thin-walled air-ionization chamber for proton therapy
454
A thin-walled air-ionization chamber for proton therapy
455
A thiocyanate-bridging dimeric cyclometalated iridium(III) complex: Synthesis, structure and phosphorescence behaviours towards metal ions
456
A Thiol Labelling Competition Experiment as a Probe for Sidechain Packing in the Kinetic Folding Intermediate of N-PGK
457
A Thiol Peroxidase Is an H2O2 Receptor and Redox-Transducer in Gene Activation
458
A thiolate ligand on a cytochrome P-450 mimic permits the use of simple environmentally benign oxidants for biomimetic steroid hydroxylation in water
459
A thionine functionalized multiwalled carbon nanotube modified electrode for the determination of hydrogen peroxide Original Research Article
460
A thionine-based reversible redox sensor in a sequential injection system Original Research Article
461
A thiophene-modified screen printed electrode for detection of dengue virus NS1 protein
462
A thiophosphate analog of dimyristoylphosphatidyl-inositol-4-phosphate is a substrate for mammalian phosphoinositide-specific phospholipase c
463
A thioredoxin reductase inhibitor induces growth inhibition and apoptosis in five cultured human carcinoma cell lines
464
A thioredoxin with antioxidant activity identified from Eriocheir sinensis
465
A thiourea-based chromoionophore for selective binding and sensing of acetate
466
A Thiourea-Functionalized Benzo-15-crown-5 for Cooperative Binding of Sodium Ions and Anions
467
A third accurate operator splitting method
468
A third case of a low-grade endometrial stromal sarcoma with a t(7;17)(p14∼21;q11.2∼21)
469
A third case of chronic eosinophilic leukemia with the (8;9)(p23;p24) translocation
470
A third episode of transfusion-derived vCJD
471
A third generation chiral phosphorus-containing dendrimer as ligand in Pd-catalyzed asymmetric allylic alkylation
472
A third generation erosion model: The combination of probabilistic and deterministic components
473
A Third Generation of Ascending Aorta Dacron Graft: Preliminary Experience
474
A third graderʹs way of thinking about linear function tables
475
A third kind growth model of tetrapod: Rod-based single crystal ZnO tetrapod nanostructure
476
A third locu (GLC1D) for adult-onet primary open-angle glaucoma map to the 8q23 region Original Reearch Article
477
A third order central WENO scheme for 2D conservation laws Original Research Article
478
A third order dispersive flow for closed curves into almost Hermitian manifolds
479
A Third Order Iterative Method for Finding Zeros of Nonlinear Equations
480
A third order method for fixed points in Banach spaces
481
A third order model for the doubly-fed induction machine
482
A Third Order Nakashima Type Implicit Pseudo Runge-Kutta Method for Delay Differential Equations
483
A third public health revolution: An editorial
484
A Third Wave, Not a Third Way? New Labour, Human Rights and Mental Health in Historical Context
485
A Third Way for Health Policy?
486
A THIRD WAY: ONLINE LABS INTEGRATED WITH PRINT MATERIALS
487
A Third Window. Natural Life beyond Newton and Darwin, R.E. Ulanowicz. Templeton Press (2009)
488
A Third Window. Natural Life beyond Newton and Darwin, R.E. Ulanowicz. Templeton Press (2009)
489
A Third-degree B-spline Collocation Scheme for Solving a Class of the Nonlinear Lane-Emden Type Equations
490
A third-generation hydrogen peroxide biosensor fabricated with hemoglobin and Triton X-100
491
A third-order boundary value problem with one-sided Nagumo condition Original Research Article
492
A Third-order Decentralized Safe Consensus Protocol for Inter-connected Heterogeneous Cooperative Vehicular Platoons
493
A third-order differential equation arising in thin-film flows and relevant to Tannerʹs Law Original Research Article
494
A third-order differential equation on a time scale
495
A third-order Douglas–Kroll ab initio model potential for the lanthanides
496
A third-order explicit central scheme for open channel flow simulations
497
A third-order finite-volume residual-based scheme for the 2D Euler equations on unstructured grids
498
A THIRD-ORDER NUMERICAL SCHEME WITH UPWIND WEIGHTING FOR SOLVING THE SOLUTE TRANSPORT EQUATION
499
A third-order state-space model for fatigue crack growth
500
A third-order Taylor–Galerkin model for the simulation of two-dimensional unsteady free surface flows
501
A third-order weighted essentially non-oscillatory- ux limiter scheme for two-dimensional in- compressible Navier-Stokes equations
502
A third-party casualty risk model for unmanned aircraft system operations
503
A third-party casualty risk model for unmanned aircraft system operations
504
A Third-Pass Genome Scan in Panic Disorder: Evidence for Multiple Susceptibility Loci
505
A thirst for progress in patientsʹ care
506
A thirteen week dietary toxicity study with 7-hydroxymatairesinol potassium acetate (HMRlignan) in rats
507
A thirteen-week oral toxicity study of annatto extract (norbixin), a natural food color extracted from the seed coat of annatto (Bixa orellana L.), in Sprague–Dawley rats
508
A thirteen-year record of bathymetric changes in the North Passage, Changjiang (Yangtze) estuary
509
A Thirty-Membered Macrocyclic Binuclear Metal Complex: Synthesis and Structural Characterization of [Ag2(psb)2]^2+ {psb = l,2-Bis[(4-pyridyl)sulfanylmethyl]benzene}
510
A Thirty-one-year Old Pregnant Woman With Infiltrative Cardiac Masses
511
A Thirty-one-year Old Pregnant Woman With Infiltrative Cardiac Masses
512
A thirty-year artificial recharge experiment in a coastal aquifer in an arid zone: The Teboulba aquifer system (Tunisian Sahel)
513
A thixotropic hydrogel from chemically cross-linked guar gum: synthesis, characterization and rheological behaviour Original Research Article
514
A thixotropy model for fresh fluid concretes: Theory, validation and applications
515
A thiyl radical mediated cascade sequence for the co-cyclisation of 1,6-hexadienes with sulfur atom transfer
516
A thoracic mass with hypertension and hypokalaemia
517
A Thorough Analysis of the Current State of Cancer Education in Medical Schools and Application of Experimental Teaching Techniques and Their Efficacy
518
A Thorough Analysis of Wire Bow-Tie Antenna
519
A Thorough Comparative Analysis of PI and Sliding Mode Controllers in Permanent Magnet Synchronous Motor Drive Based on Optimization Algorithms
520
A Thorough Evaluation of the Compatibility of an E-Business Security Negotiations Support Tool
521
A thorough physicochemical characterisation of 14 calcium phosphate-based bone substitution materials in comparison to natural bone
522
A thorough study on the reaction of DMAD with 1-arylaminoimidazole-2-thiones. Expeditious synthesis of imidazo[2,1-b][1,3]thiazoles through a novel arylamino rearrangement
523
A Thoroughgoing Design of a Rapid-cycle Microfluidic Droplet-based PCR Device to Amplify Rare DNA Strands
524
A Thought Experiment on Consciousness
525
A thoughtful algorithm for the accurate diagnosis of primary CMV infection in pregnancy
526
A thoughtful approach to brain tumours
527
A thousand flowers blooming? An examination of community energy in the UK
528
A thousand racehorse trainers cannot be wrong – Can they?
529
A Thousand Shades of Green: Sustainable Strategies for Competitive Advantage: By Pieter Winsemius, Ulrich Guntram, Earthscan Publishers, 2002. 251 pp.; ISBN 1-85383-846-2
530
A Thousand Times NO
531
A thousand years of loneliness? Globalization from the perspective of a city in a European periphery
532
A thraustochytrid protist isolated from Mercenaria mercenaria: molecular characterization and host defense responses
533
A threaded-connection locking mechanism integrated into a multi-piece mining wheel for enhanced structural performance and safety
534
A threat to tax morale: The case of Australian higher education policy
535
A threat to the public health workforce: evidence from trends in preventive medicine certification and training
536
A threat-detection advantage in those with autism spectrum disorders
537
A three component classification of phytoplankton absorption spectra: Application to ocean-color data
538
A three component force transducer for reinforced concrete structural testing
539
A three critical points theorem revisited Original Research Article
540
A three decade analysis of factors affecting burn mortality in the elderly
541
A three dimensional adaptive nodes technique applied to meshless-type methods
542
A THREE DIMENSIONAL ANALYTICAL CALCULATION OF THE AIR-GAP MAGNETIC FIELD AND TORQUE OF COAXIAL MAGNETIC GEARS
543
A three dimensional beam profile monitor based on residual and trace gas ionization
544
A three dimensional beam profile monitor based on residual and trace gas ionization
545
A three dimensional computational model of the mechanical response of a dual-phase ceramic
546
A Three Dimensional Computed Tomography (3D-CT): A Study of Maxillary Sinus in Malays
547
A three dimensional exact equation for the turbulent dissipation rate of Generalised Newtonian Fluids
548
A three dimensional geometrical model for calculation of induced stresses surrounding longwall working
549
A THREE DIMENSIONAL HTLV-1 MODEL WITH INTRACELLULAR AND IMMUNE ACTIVATION DELAYS
550
A three dimensional hydrodynamic model of tides off the north-west coast of Scotland
551
A three dimensional model of a vane rheometer
552
A three dimensional model of the M2, S2, N2, K1, and O1 tides in the Faeroe-Shetland Channel
553
A three dimensional numerical model of the Waiotapu, Waikite and Reporoa geothermal areas, New Zealand
554
A three dimensional organic–inorganic composite material constructed from cobalt-3,3′-bipyridyl networks linked through tetravanadate clusters: [{Co(3,3′-bpy)2}2V4O12]
555
A three dimensional palladium-nucleophile electrode. Catalytic reduction of alkyl bromides at a voluminous palladium–iodide cathode
556
A three dimensional parametric model of whole lower cervical spine (C3C7) under flexion, extension, torsion and lateral bending
557
A three dimensional parametric model of whole lower cervical spine (C3C7) under flexion, extension, torsion and lateral bending
558
A three dimensional plasticity model for perpendicular to grain cohesive fracture in wood
559
A three dimensional system approach for environmentally sustainable manufacturing
560
A three dimensional σ-coordinate model to simulate the dispersion of radionuclides in the marine environment: application to the Irish Sea
561
A three dimensional σ-coordinate model to simulate the dispersion of radionuclides in the marine environment: application to the Irish Sea
562
A three end-member model for petrologic analysis of lunar prospector gamma-ray spectrometer data
563
A three essential states model for electroabsorption in nonluminescent π-conjugated polymers
564
A three generation oscillation analysis of the Super-Kamiokande atmospheric neutrino data beyond one mass scale dominance approximation
565
A three generation reproduction study with Sprague–Dawley rats consuming high-amylose transgenic rice
566
A three generation study with genetically modified Bt corn in rats: Biochemical and histopathological investigation
567
A three generation study with high-lysine transgenic rice in Sprague–Dawley rats
568
A three generations nation-wide population study of family load estimates in bipolar disorder with different age at onset
569
A three layer structure model of fluoridated enamel containing CaF2, Ca(OH)2 and Fap
570
A three mechanism model to describe fouling of microfiltration membranes
571
A Three Month-Old Girl with Cleft (Bifid) Sternum and Hemangioma of the Face
572
A three phase supplier selection method based on fuzzy preference degree
573
A three point boundary value problem for nonlinear fourth order differential equations
574
A three shuffle case of the compositional parking function conjecture
575
A three source capture–recapture study of fatal injuries in Iran
576
A three species competition model as a decision support tool
577
A three species competition model as a decision support tool
578
A Three Stage Terminal Fuzzy Guidance Law for Reentry Vehicles
579
A three states sleep–waking model
580
A three step approach for removing organic matter from South African water sources and treatment plants
581
A Three Step Implicit Hybrid Linear Multistep Method for the Solution of Third Order Ordinary Differential Equations
582
A three step iterative algorithm for common solutions of quasi-variational inclusions and fixed point problems of pseudocontractions
583
A three step process for purification of fly ash zeolites by hydrothermal treatment
584
A three steps procedure (swelling–poling–deswelling) to produce a stable alignment of second order NLO-phores covalently attached to a cross-linked polymeric network
585
A three three-brane universe: new phenomenology for the new millennium? Original Research Article
586
A Three Year Retrospective Study on Seroprevalence of Syphilis among Pregnant Women at Gondar University Teaching Hospital, Ethiopia.
587
A three years retrospective study on the nature and cause of ocular dermoids in cross-bred calves
588
A three-axis autocollimator for detection of angular error motions of a precision stage
589
A Three-axis Displacement Sensor with Nanometric Resolution
590
A three-axis knee wear simulator with ball-on-flat contact
591
A three-ball intersection property for u-ideals
592
A three-band semi-analytical model for deriving total suspended sediment concentration from HJ-1A/CCD data in turbid coastal waters
593
A three-body calculation for collision-induced dissociation Original Research Article
594
A three-body force model for the baryon spectrum
595
A three-body force model for the electromagnetic excitation of the nucleon
596
A three-camera multispectral digital video imaging system
597
A three-carbon (n+1+2) ring expansion method for the synthesis of macrocyclic enones. Application to muscone synthesis
598
A three-cell liquid hydrogen target for an extended focal plane polarimeter
599
A three-cell liquid hydrogen target for an extended focal plane polarimeter
600
A three-characteristic-parameter correlation model for strong electrolyte solutions
601
A three-class variance swapping technique for simulation experiments
602
A Three-Coefficient Model with Global Optimization for Heavy End Characterization of Gas Condensate PVT Data
603
A three-compartment model of the C-peptide–insulin dynamic during the DIST test
604
A three-component and one-pot reaction for synthesis of 1-(aroyl)3-{6-[3- (aroyl)selenoureido]pyridine-2-yl}selenourea
605
A three-component approach to isoquinoline derivatives by cycloaddition/Heck reaction sequence
606
A three-component deformation model for image-guided surgery
607
A three-component dicamba O-demethylase from Pseudomonas maltophilia, strain DI-6: Purification and characterization
608
A three-component domino protocol for the facile synthesis of highly functionalized tetrahydroisoquinolines by creation of their benzene ring
609
A three-component domino reaction of 2-tetralone, hydroxylamine and acetylene: a one-pot, highly regioselective synthesis of 4,5-dihydrobenz[e]indoles
610
A three-component force vector cell for in vitro quantification of the force exerted by the papillary muscle on the left ventricular wall
611
A three-component Job method for the study of complexation and its effect on co-adsorption of pairs of organic compounds: Application to the study of adsorptive micellar flocculation
612
A three-component Mannich-type condensation leading to phosphinic dipeptides—extended transition state analogue inhibitors of aminopeptidases
613
A three-component mixed-matrix membrane with enhanced CO2 separation properties based on zeolites and ionic liquid materials
614
A three-component mixing model for ridge-crest hydrothermal fluids
615
A Three-Component Model of Ocean Color and Its Application in the Ebro River Mouth Area
616
A three-component model of phytoplankton size class for the Atlantic Ocean
617
A three-component model of phytoplankton size class for the Atlantic Ocean
618
A three-component novel synthesis of 1-carbamato-alkyl-2-naphthol derivatives
619
A three-component reaction between 1-substituted-2-methylimidazoles, cyanophenylacetylene, and various aldehydes: stereoselective synthesis of (Z)-(2-cyano-1-phenyl)vinyl ethers of 2-(2-hydroxyalkyl)imidazoles
620
A three-component reaction between alkenes, secondary phosphanes, and elemental selenium: a novel, efficient, atom-economic synthesis of diselenophosphinic esters
621
A three-component reaction between benzynes, the enolate of acetaldehyde, and unsaturated esters and dihydroisoquinolines
622
A Three-component Reaction of Phenol, Aldehyde, and Active Methylene Substrate under Lewis acid Catalysis: Successful Trapping of o-Quinone Methide to Afford Benzopyran Systems
623
A Three-Component Synthesis of (1,3-Oxazol-2-yl)-1,2dihydro(iso)quinoline and its further Structural Diversifications
624
A three-component synthesis of aminomethylenebis-H-phosphinates
625
A three-component synthesis of benzochromenodiazocines and chromenopyridines
626
A three-component synthesis of homoallylic amines catalyzed by CuI
627
A three-component synthesis of pyrido[2,3-d]pyrimidines
628
A three-component, intramolecular Ugi reaction toward unique indoloketopiperazines
629
A three-constituent multicontinuum theory for woven fabric composite materials
630
A three-constituent multicontinuum theory for woven fabric composite materials
631
A three-day rate of efficacy of a moderate potency topical steroid in the treatment of atopic dermatitis in infancy and childhood
632
A THREE-DAY-OLD FEMALE WITH CARPENTER’S SYNDROME
633
A three-decade Acacia mangium
634
A three-decade review of thermal injuries among the elderly at a regional burn centre
635
A three-detector positron lifetime setup suited for measurements on irradiated steels
636
A three-detector positron lifetime setup suited for measurements on irradiated steels
637
A Three-Dimension Double-Population Thermal Lattice BGK Model for Simulation of Natural Convection Heat Transfer in a Cube
638
A three-dimensional (3,4)-connected network of 658 topology containing hexagonal channels constructed from cadmium(II) and 5-aminoisophthalate
639
A three-dimensional (3D) numerical study of fatigue crack growth using remeshing techniques
640
A three-dimensional abrasion algorithm for projectile mass loss during penetration
641
A three-dimensional adaptive analysis using the meshfree node-based smoothed point interpolation method (NS-PIM)
642
A three-dimensional adaptive method based on the iterative grid redistribution
643
A three-dimensional agglomerate model for the cathode catalyst layer of PEM fuel cells
644
A three-dimensional AgI coordination polymer constructed via η2 Ag–C bonds: Thermal, fluorescence, structural and solution studies
645
A three-dimensional analysis of a fibre-reinforced aortic valve prosthesis
646
A three-dimensional analysis of enamel distribution patterns in human permanent first molars
647
A three-dimensional analysis of fatigue crack paths in thin metallic sheets
648
A three-dimensional analysis of humeral head retroversion
649
A three-dimensional analysis of laminated orthotropic plates
650
A three-dimensional analysis of media motion and grinding regions in mills
651
A Three-Dimensional Analysis of Silicone Rubber Insulators Under Different Environmental Conditions Considering the Corona Rings Effect
652
A three-dimensional analysis of the ground reaction force vector patterns in normal and pathological gait
653
A THREE-DIMENSIONAL ANALYSIS OF THE SPHEROIDAL AND TOROIDAL ELASTIC VIBRATIONS OF THICK-WALLED SPHERICAL BODIES OF REVOLUTION
654
A Three-Dimensional Analysis of the Total and Effective Stresses in Submerged Backfilled Stopes
655
A three-dimensional analysis of the universal beam tandem rolling process: Part I. Deformation analysis
656
A three-dimensional analysis of the universal beam tandem rolling process: Part II: Stress analysis
657
A three-dimensional analytical model to predict the thermo-metallurgical effects within the surface layer during grinding and grind-hardening
658
A three-dimensional analytical model to simulate groundwater flow during operation of recirculating wells
659
A three-dimensional analytical solution of the microheater temperature before bubble nucleation
660
A three-dimensional angle-optimized finite-difference time-domain algorithm
661
A three-dimensional approach to the calculation of foot clearance during locomotion
662
A three-dimensional atomic scale simulations of CVD-SiC film growth in {1 1 1}, {1 1 0} and {1 0 0} family of planes
663
A three-dimensional atom-probe study of preferential sputtering of a Ni91Pt9 alloy
664
A three-dimensional automated visual inspection system for SMT assembly
665
A three-dimensional autonomous system with unbounded ‘bending’ solutions
666
A three-dimensional bimetallic oxide constructed from octamolybdate clusters and copper–ligand cation polymer subunits. A comment on the stability of the octamolybdate isomers
667
A three-dimensional bimetallic oxide constructed from octamolybdate clusters and copper–ligand cation polymer subunits. A comment on the stability of the octamolybdate isomers
668
A three-dimensional biomechanical comparison between turning strategies during the stance phase of walking
669
A three-dimensional biophysical model of Karenia brevis dynamics on the west Florida shelf: A look at physical transport and potential zooplankton grazing controls
670
A three-dimensional boundary determination problem in potential corrosion damage
671
A three-dimensional boundary element approach to confined free-surface flow as applied to die casting
672
A three-dimensional boundary element formulation for the elastoplastic analysis of cracked bodies
673
A three-dimensional boundary element stress and bending analysis of transversely/longitudinally graded plates with circular cutouts under biaxial loading
674
A three-dimensional B-spline boundary element Original Research Article
675
A three-dimensional calculation of atmospheric neutrino fluxes
676
A three-dimensional Cartesian adaptive mesh code for compressible magnetohydrodynamics Original Research Article
677
A three-dimensional cell-loading system using autologous plasma loaded into a porous β-tricalcium-phosphate block promotes bone formation at extraskeletal sites in rats
678
A three-dimensional cellular automaton model for dendritic growth in multi-component alloys Original Research Article
679
A three-dimensional cerebrovascular flow phantom
680
A three-dimensional cerebrovascular flow phantom
681
A three-dimensional CFD model of direct ethanol fuel cells: Anode flow bed analysis
682
A Three-dimensional CFD Study on Multiphase Flow in an FCC Regenerator Integrated with Oxy-combustion
683
A three-dimensional chemo-mechanical continuum model for smooth muscle contraction
684
A three-dimensional cobalt(II)-coordination polymer based on 3,5-pyridinedicarboxylate
685
A three-dimensional co-culture model of the aortic valve using magnetic levitation
686
A three-dimensional cohesive-frictional grain-boundary micromechanical model for intergranular degradation and failure in polycrystalline materials
687
A three-dimensional computational analysis of fluid–structure interaction in the aortic valve
688
A three-dimensional computational model for intergranular cracking
689
A three-dimensional computational procedure for reproducing meshless methods and the finite element method
690
A Three-Dimensional Computed Tomography Analysis of Craniofacial Asymmetry in Malaysian Infants with Cleft Lip and Palate
691
A three-dimensional computerized isometric strength measurement system
692
A three-dimensional conductivity model for electrodes in lead-acid batteries
693
A three-dimensional conjugate model with realistic boundary conditions for flow and heat transfer in an industry scale hydrothermal autoclave
694
A three-dimensional contact algorithm for sliding surfaces
695
A three-dimensional continuum approach to the thermoelastodynamics of large-scale structures
696
A three-dimensional coordination framework containing μ4-sulfate anions [Cd(μ4-SO4)(bpy)]n (bpy=4,4′-bipyridine)
697
A three-dimensional coordination polymer constructed from sodium(I) ion and benzene-1,2,4-tricarboxylate ligand: Thermal, structure and spectroscopic characteristics
698
A Three-Dimensional Coordination Polymer Featuring Effective Ferrimagnetic HydroxideBridged Manganese(II) Chains
699
A Three-dimensional Cryo-electron Microscopy Structure of the Bacteriophage ϕKZ Head
700
A three-dimensional crystal plasticity model for duplex Ti–6Al–4V
701
A three-dimensional cyclic meso-scale numerical procedure for simulation of unreinforced masonry structures
702
A three-dimensional data visualization technique for reporting movement pattern deviations
703
A three-dimensional deformable model for segmentation of human prostate from ultrasound images
704
A three-dimensional digital image correlation technique for strain measurements in microstructures
705
A three-dimensional dislocation dynamics study of the effects of grain size and shape on strengthening behavior of fcc Cu
706
A three-dimensional distribution of osteocyte processes revealed by the combination of confocal laser scanning microscopy and differential interference contrast microscopy
707
A three-dimensional dual-layer nano/microfibrous structure of electrospun chitosan/poly(d,l-lactide) membrane for the improvement of cytocompatibility
708
A three-dimensional dual-mechanism model of pore stability in a sintering alumina structure
709
A three-dimensional dual-mechanism model of pore stability in a sintering alumina structure
710
A three-dimensional dynamic model of the minor constituents of the mesosphere
711
A three-dimensional edge-crack finite element for fracture mechanics applications
712
A three-dimensional eigenfunction expansion approach for singular stress field near an adhesively-bonded scarf joint interface in a rigidly-encased plate
713
A three-dimensional elasticity solution for functionally graded rotating disks
714
A three-dimensional elasticity solution for two-directional FGM annular plates with non-uniform elastic foundations subjected to normal and shear tractions
715
A three-dimensional electromagnetic particle-in-cell code to simulate heavy ion beam propagation in the reaction chamber
716
A three-dimensional electrostatic particle-in-cell methodology on unstructured Delaunay–Voronoi grids
717
A three-dimensional element-free Galerkin elastic and elastoplastic formulation
718
A three-dimensional ES-FEM for fracture mechanics problems in elastic solids
719
A three-dimensional Eulerian model for transport and deposition of volcanic ashes
720
A three-dimensional eutrophication modeling in Tolo Harbour
721
A three-dimensional explicit preconditioned solver
722
A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements
723
A three-dimensional finite analysis of adaptive remodelling in the proximal femur
724
A three-dimensional finite element analysis of interface delamination in a ductile film/hard substrate system induced by wedge indentation
725
A Three-dimensional Finite Element Analysis of Stress Distribution in Inclined Placed Implants
726
A three-dimensional finite element analysis of the combined behavior of ligaments and menisci in the healthy human knee joint
727
A three‑dimensional finite element analysis of the influence of varying implant crest module designs on the stress distribution to the bone
728
A three-dimensional finite element analysis of the three-roll planetary mill
729
A three-dimensional finite element approach for predicting the transmission loss in mufflers and silencers with no mean flow
730
A three-dimensional finite element for gradient elasticity based on a mixed-type formulation
731
A THREE-DIMENSIONAL FINITE ELEMENT FORMULATION FOR THERMOVISCOELASTIC ORTHOTROPIC MEDIA
732
A three-dimensional finite element method with arbitrary polyhedral elements
733
A three-dimensional finite element model for confined concrete structures
734
A three-dimensional finite element model for stress analysis of adhesive joints
735
A three-dimensional finite element model of the human anterior cruciate ligament: a computational analysis with experimental validation
736
A three-dimensional finite element model of the polymerization process in dental restorations
737
A three-dimensional finite element simulation of the vertical–horizontal rolling process in the width reduction of slab
738
A three-dimensional finite element stress analysis and strength prediction of stepped-lap adhesive joints of dissimilar adherends subjected to bending moments
739
A three-dimensional finite element stress analysis for tunnel placement and buttons in anterior cruciate ligament reconstructions
740
A three-dimensional finite element study on the biomechanical behavior of an FGBM dental implant in surrounding bone
741
A three-dimensional finite volume method based on radial basis functions for the accurate computational modelling of nonlinear diffusion equations
742
A Three-Dimensional Finite Volume Model for Shallow Water Flow Simulation
743
A three-dimensional finite-element stress analysis and strength evaluation of stepped-lap adhesive joints subjected to static tensile loadings
744
A three-dimensional finite-volume solver for the Maxwell equations with divergence cleaning on unstructured meshes Original Research Article
745
A THREE-DIMENSIONAL FINITE-VOLUME/NEWTON METHOD FOR THERMAL-CAPILLARY PROBLEMS
746
A three-dimensional framework constructed from gadolinium(III) and molybdenum through linkage of pyridine-2,5-dicarboxylate groups
747
A three-dimensional framework of dimeric copper(II) acetate linked by coordinated sodium cations
748
A three-dimensional free vibration analysis of cross-ply laminated rectangular plates with clamped edges Original Research Article
749
A Three-Dimensional FRET Analysis to Construct an Atomic Model of the Actin–Tropomyosin Complex on a Reconstituted Thin Filament
750
A Three-Dimensional FRET Analysis to Construct an Atomic Model of the Actin–Tropomyosin–Troponin Core Domain Complex on a Muscle Thin Filament
751
A three-dimensional full-cell CFD model used to investigate the effects of different flow channel designs on PEMFC performance
752
A three-dimensional geometric model of the knee for the study of joint forces in gait
753
A three-dimensional global model study of carbonyl sulfide in the troposphere and the lower stratosphere
754
A three-dimensional grain boundary formulation for microstructural modeling of polycrystalline materials
755
A three-dimensional gravity study of the Rodrigues Triple Junction and Southeast Indian Ridge
756
A three-dimensional heat sink module design problem with experimental verification
757
A three-dimensional heterometallic MnIICuII azide-bridged coordination polymer: Synthesis, structure, and magnetic properties
758
A three-dimensional hierarchical CdO nanostructure: Preparation and its improved gas-diffusing performance in gas sensor
759
A three-dimensional hierarchical nanoporous PdCu alloy for enhanced electrocatalysis and biosensing Original Research Article
760
A three-dimensional highly stable Zn(II) coordination polymer based on 1,4-benzeneditetrazolate (H2BDT): Synthesis, crystal structure, and luminescent properties
761
A three-dimensional holes closing algorithm
762
A three-dimensional human head finite element model and power flow in a human head subject to impact loading
763
A three-dimensional hybrid finite element/spectral analysis of noise radiation from turbofan inlets
764
A three-dimensional hydrodynamic model of estuarine circulation with an application to Southampton Water, UK
765
A three-dimensional hydrostatic model for coastal and ocean modelling using a generalised topography following co-ordinate system
766
A THREE-DIMENSIONAL IMAGING ALGORITHM FOR TOMOGRAPHY SAR BASED ON IMPROVED INTERPOLATED ARRAY TRANSFORM1
767
A three-dimensional in vitro model to quantify inflammatory response to biomaterials
768
A three-dimensional in vitro culture model for primary neonatal rat ventricular myocytes
769
A three-dimensional interpenetrating framework with spacious multi-channels: synthesis and characterisation of a cobalt(II) coordination polymer based on an angular dipyridyl ligand incorporating an amide spacer
770
A three-dimensional inverse forced convection problem in estimating surface heat flux by conjugate gradient method
771
A three-dimensional inverse geometry problem in estimating simultaneously two interfacial configurations in a composite domain
772
A three-dimensional inverse geometry problem in estimating the space and time-dependent shape of an irregular internal cavity
773
A three-dimensional inverse problem in estimating the applied heat flux of a titanium drilling – Theoretical and experimental studies
774
A three-dimensional inverse problem in estimating the internal heat flux of housing for high speed motors
775
A three-dimensional inverse problem in imaging the local heat transfer coefficients for plate finned-tube heat exchangers
776
A Three-Dimensional Iron(III) Phosphate, [C2N2H10]2 [Fe5F4(PO4)(HPO4)6]
777
A three-dimensional kinematic and dynamic study of the lower limb during the stance phase of gait using an homogeneous matrix approach
778
A three-dimensional large deformation meshfree method for arbitrary evolving cracks Original Research Article
779
A three-dimensional least-squares finite element technique for deformation analysis
780
A three-dimensional level set simulation of coupled reactive transport and precipitation/dissolution
781
A three-dimensional light transfer model based on the vertical point-quadrant method and Monte-Carlo simulation in a Fagus crenata forest canopy on Mount Naeba in Japan
782
A three-dimensional matching model for perishable production scheduling Original Research Article
783
A three-dimensional mathematical model for absorption in a metal hydride bed
784
A three-dimensional mathematical model for drug delivery from drug-eluting stents
785
A three-dimensional mathematical model for liquid-fed direct methanol fuel cells
786
A three-dimensional mathematical model of temporomandibular joint loading
787
A three-dimensional mechanical analysis of a stentless fibre-reinforced aortic valve prosthesis
788
A three-dimensional MEMS optical switching module having 100 input and 100 output ports
789
A three-dimensional mesh generator for arbitrary multiple material domains
790
A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics
791
A three-dimensional metal–organic framework based on hexanuclear copper units with unsaturated CuII centers
792
A three-dimensional method for calculating independent chemical U/Pb- and Th/Pb-ages of accessory minerals
793
A three-dimensional MHD model of plasma flow around Titan
794
A three-dimensional micromechanical model to predict the viscoelastic behavior of woven composites
795
A three-dimensional micromechanics model for the damage of brittle materials based on the growth and unilateral effect of elliptic microcracks
796
A three-dimensional microporous coordination polymer with fluorescent property
797
A three-dimensional mixed finite-difference Galerkin function model for the oceanic circulation in the Yellow Sea and the East China Sea
798
A three-dimensional mixed finite-difference Galerkin function model for the oceanic circulation in the Yellow Sea and the East China Sea in the presence of M2 tide
799
A three-dimensional mixed-domain PEM fuel cell model with fully-coupled transport phenomena
800
A three-dimensional model describing stress-induced solid phase transformation with permanent inelasticity
801
A three-dimensional model describing stress-temperature induced solid phase transformations: solution algorithm and boundary value problems
802
A three-dimensional model describing stress-temperature induced solid phase transformations: thermomechanical coupling and hybrid composite applications
803
A three-dimensional model for calculating reflection functions of inhomogeneous and orographically structured natural landscapes
804
A three-dimensional model for particle dissolution in binary alloys
805
A three-dimensional model for the development of the microstructure in steel during slow cooling
806
A three-dimensional model for the development of the microstructure in steel during slow cooling
807
A three-dimensional model for the dynamics of micro-endmills including bending, torsional and axial vibrations
808
A three-dimensional model for thermal analysis in a vanadium flow battery
809
A three-dimensional model for transient performance of a solid oxide fuel cell
810
A three-dimensional model of CdZnTe gamma-ray spectrometer
811
A three-dimensional model of CdZnTe gamma-ray spectrometer
812
A three-dimensional model of circular tube under quasi-static external free inversion
813
A three-dimensional model of circular tube under quasi-static external free inversion
814
A Three-dimensional Model of Deep Water Renewal and its Influence on Residual Currents in the Central Strait of Georgia, Canada
815
A three-dimensional model of droplet impact and solidification
816
A three-dimensional model of fluid–structural interactions for quantifying the contractile force for cardiomyocytes on hybrid biopolymer microcantilever
817
A three-dimensional model of forest development and competition
818
A three-dimensional model of forest development and competition
819
A Three-Dimensional Model of Fungal Morphogenesis Based on the Vesicle Supply Center Concept
820
A three-dimensional model of magneto-mechanical behaviors of martensite reorientation in ferromagnetic shape memory alloys
821
A three-dimensional model of moist convection for the giant planets II: Saturnʹs water and ammonia moist convective storms
822
A three-dimensional model of residential energy consumer archetypes for local energy policy design in the UK
823
A three-dimensional model of the effect of stemflow on soil water dynamics around a tree on a hillslope
824
A three-dimensional model of the propagation of Alfvén waves through the auroral ionosphere: first results Original Research Article
825
A three-dimensional model of the rat hindlimb: Musculoskeletal geometry and muscle moment arms
826
A three-dimensional model of the wire-arc spray process and its experimental validation
827
A three-dimensional model of tidal currents in the mouth of the Tagus estuary
828
A Three-dimensional Model of Tide and Wind-induced Residual Currents in the Central Strait of Georgia, Canada
829
A three-dimensional model of wind-driven circulation on the shelf: application to the storm of January 1993
830
A three-dimensional model study of the Mediterranean outflow
831
A three-dimensional model study of warm core ring interaction with continental shelf and slope
832
A three-dimensional model study on processes of stratification and de-stratification in the Limfjord
833
A three-dimensional modeling of transport phenomena of proton exchange membrane fuel cells with various flow fields
834
A THREE-DIMENSIONAL MODELLING OF LOW VELOCITY IMPACT DAMAGE IN COMPOSITE LAMINATES
835
A three-dimensional modelling study of the processes leading to mid latitude nitric oxide increases in the lower thermosphere following periods of high geomagnetic activity Original Research Article
836
A three-dimensional Monte Carlo model for electrically conductive polymer matrix composites filled with curved fibers
837
A three-dimensional morphed potential of Ne–HCl including the ground state deuterated Σ bending vibration
838
A three-dimensional multidimensional gas-kinetic scheme for the Navier–Stokes equations under gravitational fields
839
A three-dimensional multivariate model of passive human joint torques and articular boundaries
840
A three-dimensional multi-volume analysis of combustible mixture generation due to in-vessel LOCA of ITER using the gasflow code
841
A three-dimensional musculoskeletal database for the lower extremities
842
A three-dimensional nanofibrous scaffold for cartilage tissue engineering using human mesenchymal stem cells
843
A three-dimensional nanostructure of graphite intercalated by carbon nanotubes with high cross-plane thermal conductivity and bending strength
844
A three-dimensional network constructed from the assembly of 1,3-diaminopropane-copper(II) and tetracyanopalladate(II) moieties
845
A three-dimensional network model of permeability in vesicular material
846
A three-dimensional neural network model for unconstrained handwritten numeral recognition: a new approach
847
A three-dimensional neutronics-thermohydraulics simulation of core disruptive accident in sodium-cooled fast reactor Original Research Article
848
A three-dimensional nodal-based implementation of a family of discontinuous Galerkin methods for elasticity problems
849
A three-dimensional non-interpenetrated porous metal–organic framework based on cationic 1-D chains
850
A three-dimensional non-linear constitutive law for magnetorheological fluids, with applications
851
A three-dimensional nonlinear finite element analysis of the mechanical behavior of tissue engineered intervertebral discs under complex loads
852
A three-dimensional nonlinear meshfree algorithm for simulating mechanical responses of soft tissue
853
A three-dimensional nonlinear model for dissipative response of soft tissue
854
A three-dimensional nonlinear viscoelastic constitutive model of solid propellant
855
A three-dimensional numerical manifold method based on tetrahedral meshes
856
A three-dimensional numerical method of moments for groundwater flow and solute transport in a nonstationary conductivity field
857
A three-dimensional numerical model for a convection–diffusion phase change process during laser melting of ceramic materials
858
A three-dimensional numerical model for dense granular flows based on the rheology
859
A three-dimensional numerical model for eutrophication and pollutant transport
860
A three-dimensional numerical model for eutrophication and pollutant transport
861
A three-dimensional numerical model for incompressible two-phase flow of a granular bed submitted to a laminar shearing flow
862
A three-dimensional numerical model of a single-chamber solid oxide fuel cell
863
A three-dimensional numerical model of borehole heat exchanger heat transfer and fluid flow
864
A three-dimensional numerical model of coastal upwelling along the west coast of India
865
A Three-Dimensional Numerical Model of Surface Waves in the Surf Zone and Longshore Current Generation over a Plane Beach
866
A three-dimensional numerical model of thermoelectric generators in fluid power systems
867
A three-dimensional numerical model to estimate the fall velocity of sediment particles
868
A Three-dimensional Numerical Modeling of Contaminant Dispersion from Arvand Rood River Into the Persian Gulf
869
A three-dimensional numerical simulation of impinging jet arrays on a moving plate
870
A three-dimensional numerical simulation of mandible fracture reduction with screwed miniplates
871
A three-dimensional numerical simulation of the osmotic dehydration of mango and effect of freezing on the mass transfer rates Original Research Article
872
A Three-dimensional Numerical Simulation of Transient Heat and Mass Transfer inside a Single Rice Kernel during the Drying Process
873
A three-dimensional numerical study and comparison between the air side model and the air/water side model of a plain fin-and-tube heat exchanger
874
A three-dimensional numerical study of mixed mode (I and II) crack tip fields in elastic-plastic solids
875
A three-dimensional numerical study of mode I crack tip fields in pressure sensitive plastic solids
876
A three-dimensional numerical study of the combustion of coal blends in blast furnace
877
A three-dimensional open framework constructed by rod SBUs and T-shaped linkers
878
A three-dimensional organic–inorganic 3d–4f hybrid polymer constructed with organic pyridinedicarboxylic acid and inorganic lanthanide sulfate skeletons
879
A three-dimensional organic–inorganic hybrid solid constructed from novel Mo–O–Zn bimetallic oxide networks linked via 3-amino-1,2,4-triazole
880
A three-dimensional osteochondral composite scaffold for articular cartilage repair
881
A three-dimensional parameterized finite element model of the lower cervical spine, study of the influence of the posterior articular facets
882
A three-dimensional particle tracking method for bubbly flow simulation Original Research Article
883
A three-dimensional peano series solution for the vibration of functionally graded piezoelectric laminates in cylindrical bending
884
A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA
885
A three-dimensional performance analysis of all-glass vacuum tubes with coaxial fluid conduit
886
A three-dimensional pharmacophore model for RXRα agonists
887
A three-dimensional phase transition model in ferromagnetism: Existence and uniqueness
888
A three-dimensional phase-field model for computer simulation of lamellar structure formation in γTiAl intermetallic alloys Original Research Article
889
A three-dimensional phenomenological model for martensite reorientation in shape memory alloys
890
A three-dimensional plume rise model for dry and wet plumes
891
A three-dimensional poroelastic analysis of rock failure around a hydraulic fracture
892
A three-dimensional porous metal–organic framework of unusual rob topology based on a novel fluorinated bis(imidazole) ligand
893
A three-dimensional porous metal–organic framework with the rutile topology constructed from triangular and distorted octahedral building blocks
894
A three-dimensional potential energy surface and infrared spectra for the Ar–OCS van der Waals complex
895
A three-dimensional potential energy surface and infrared spectra for the Kr–OCS van der Waals complex
896
A three-dimensional progressive damage model for bolted joints in composite laminates subjected to tensile loading
897
A three-dimensional progressive failure model for laminated composite plates subjected to transverse loading
898
A Three-Dimensional Project Portfolio Management Framework for Construction Companies
899
A three-dimensional pseudospectral method for rotating flows in a cylinder
900
A three-dimensional quantum mechanical study of the F + H2/D2 reactions. On a new potential energy surface
901
A three-dimensional quantum mechanical study of the O+HO2 atmospheric reaction: infinite-order sudden approximation and novel adiabatic approaches vs. quasiclassical trajectories
902
A three-dimensional regression model of the shoulder rhythm
903
A three‐dimensional rigorous method for stability analysis of landslides
904
A Three-Dimensional Ring Annuloplasty for the Treatment of Tricuspid Regurgitation
905
A three-dimensional self-adaptive cohesive zone model for interfacial delamination
906
A three-dimensional self-adaptive hp finite element method for the characterization of waveguide discontinuities
907
A three-dimensional semi-analytical model for the composite laminated plates with a stepped lap repair
908
A three-dimensional semiconducting superlattice built up of neutral [Zn10(μ3-S)4(SPhMe-4)12(DMF)4] supertetrahedral clusters
909
A three-dimensional shape memory alloy/elastomer actuator
910
A three-dimensional sharp interface Cartesian grid method for solving high speed multi-material impact, penetration and fragmentation problems
911
A three-dimensional sharp interface model for the quantitative simulation of solutal dendritic growth Original Research Article
912
A three-dimensional silver(I) coordination polymer involving a new bridging mode of saccharinate
913
A three-dimensional simulation of a hydrocyclone for the sludge separation in water purifying plants and comparison with experimental data
914
A three-dimensional simulation of a parabolic trough solar collector system using molten salt as heat transfer fluid
915
A three-dimensional simulation of barrier properties of nanocomposite films
916
A three-dimensional simulation of crustal deformation accompanied by subduction in the Tokai region, central Japan
917
A three-dimensional simulation of shot peening process using multiple shot impacts
918
A three-dimensional solution for laminated orthotropic rectangular plates with viscoelastic interfaces
919
A three-dimensional solution for the orbit of the asteroidal satellite of 22 Kalliope
920
A three-dimensional spatial model for plant competition in an heterogeneous soil environment
921
A three-dimensional spatial model for plant competition in an heterogeneous soil environment
922
A three-dimensional spectral element model for the solution of the hydrostatic primitive equations
923
A three-dimensional state space finite element solution for laminated composite cylindrical shells Original Research Article
924
A three-dimensional steel/concrete interface model including corrosion effects
925
A three-dimensional stochastic model of the behavior of radionuclides in forests I. Model structure
926
A three-dimensional stochastic model of the behavior of radionuclides in forests I. Model structure
927
A three-dimensional stochastic model of the behavior of radionuclides in forests II. Cs-137 behavior in forest soils
928
A three-dimensional stochastic model of the behavior of radionuclides in forests II. Cs-137 behavior in forest soils
929
A three-dimensional stochastic model of the behavior of radionuclides in forests III. Cs-137 uptake and release by vegetation
930
A three-dimensional stochastic model of the behavior of radionuclides in forests III. Cs-137 uptake and release by vegetation
931
A Three-dimensional Stomatal CO2Exchange Model Including Gaseous Phase and Leaf Mesophyll Separated by Irregular Interface
932
A three-dimensional structure of Plasmodium falciparum serine hydroxymethyltransferase in complex with glycine and 5-formyl-tetrahydrofolate. Homology modeling and molecular dynamics Original Research Article
933
A three-dimensional structure of vanadium malonate: synthesis, characterization and X-ray structure of [Na2VO(C3H2O4)2(H2O)2]n
934
A three-dimensional structure, four-connected network of the zeolite Li–A(BW) topological frame sustained by [Hg(hmt)1/2Br2] units via secondary bonding
935
A three-dimensional study of endometrial microvessels in women using the contraceptive subdermal levonorgestrel implant system, norplant®
936
A three-dimensional study of loads across the fracture for different fracture sites of the mandible
937
A THREE-DIMENSIONAL STUDY OF THE MOTION OF A DROP IN PLANE POISEUILLE FLOW AT FINITE REYNOLDS NUMBERS
938
A three-dimensional study on methane hydrate decomposition with different methods using five-spot well
939
A three-dimensional study on the formation and dissociation of methane hydrate in porous sediment by depressurization
940
A three-dimensional supramolecular complex [Cs(DB24C8)][CuBr2] based on C–H⋯π and Cs⋯Br weak interactions
941
A THREE-DIMENSIONAL SYMMETRICAL CONDENSED TLM NODE FOR ACOUSTICS
942
A three-dimensional theoretical model for estimating the thermal residual stresses in micro multilayer ceramic capacitors
943
A three-dimensional theoretical model for predicting transient thermal behavior of thermoelectric coolers
944
A three-dimensional theory for the development and migration of deep sea sedimentary waves
945
A three-dimensional thermal abuse model for lithium-ion cells
946
A three-dimensional thermal-fluid analysis of flat heat pipes
947
A three-dimensional thermo-mechanical finite element model of complex strip rolling considering sticking and slipping friction
948
A three-dimensional thermo-poroelastic model for fracture response to injection/extraction in enhanced geothermal systems
949
A Three-dimensional Tidal Model in Boundary-fitted Curvilinear Grids
950
A three-dimensional tissue culture model of bone formation utilizing rotational co-culture of human adult osteoblasts and osteoclasts
951
A three-dimensional torsional spring analogy method for unstructured dynamic meshes
952
A three-dimensional tunnel model for calculation of train-induced ground vibration
953
A Three-Dimensional Two-Fluid Modeling of Stratified Flow with Condensation for Pressurized Thermal Shock Investigations
954
A three-dimensional two-phase flow model for a liquid-fed direct methanol fuel cell
955
A three-dimensional two-phase flow model with phase change inside a tube of petrochemical pre-heaters
956
A three-dimensional ultrasonographic quantitative analysis of non-ulcerated carotid plaque morphology in symptomatic and asymptomatic carotid stenosis
957
A three-dimensional unilateral autoregressive lattice process
958
A three-dimensional unsteady hydrodynamic profile of a reciprocating membrane channel
959
A three-dimensional unstructured mesh finite element shallow-water model, with application to the flows around an island and in a wind-driven, elongated basin
960
A Three-Dimensional Variational Data Analysis Method with Recursive Filter for Doppler Radars
961
A three-dimensional vertex dynamics cell model of space-filling polyhedra simulating cell behavior in a cell aggregate
962
A three-dimensional virtual environment for modeling mechanical cardiopulmonary interactions
963
A three-dimensional viscoelastic constitutive model for particulate composites with growing damage and its experimental validation
964
A three-dimensional water quality-macrophyte interaction model for shallow lakes
965
A three-dimensional water quality-macrophyte interaction model for shallow lakes
966
A three-dimensional wind and behaviorally driven population dynamics model for Karenia brevis
967
A three-dimensional X-ray diffraction microscope for deformation studies of polycrystals
968
A three-dimensional X-ray diffraction microscope for deformation studies of polycrystals
969
A three-dimensional zeolitic zinc phosphate, [C8N5H28][Zn5(PO4)5]H2O, with thomsonite structure
970
A three-dimensional zig-zag theory for analysis of thick laminated beams
971
A three-dimensional zinc(II) complex consisting of single metal centers and pentanuclear clusters bridged by 1,3,5-benzenetricarboxylate
972
A three-dimensional zincic molybdenum (V) phosphate with helical channel: Synthesis, structure, and electrochemical properties
973
A three-dimensional, biaxially textured oxide nanofence composed ofMgO single crystal nanobelt segments
974
A three-dimensional, higher-order, elasticity-based micromechanics model
975
A three-dimensional, quantitative computed tomographic study of changes in distribution of bone mineralization in the developing human mandible
976
A three-dimensional, time-dependent analysis of flow through a bileaflet mechanical heart valve: Comparison of experimental and numerical results
977
A three-dimensionally adjustable amperometric detector for microchip electrophoretic measurement of nitroaromatic pollutants
978
A three-dimensionally oriented π-conjugated system; synthesis and characterization of porphyrins bearing π-conjugated pendant strands
979
A three-dof robomech: Architecture, optimum synthesis and introduction to compliant robomechs
980
A Three-echelon Multi-objective Multi-period Multi-product Supply Chain Network Design Problem: A Goal Programming Approach
981
A Three-echelon Multi-objective Multi-period Multi-product Supply Chain Network Design Problem: A Goal Programming Approach
982
A Three-Echelon Retailer-Led Closed Loop Supply Chain with Substitutable Products Coordination: Real-World Beverage Industry Application
983
A three-factor Doehlert matrix design in optimising the determination of octadecyltrimethylammonium bromide by cation-exchange chromatography with suppressed conductivity detection Original Research Article
984
A three-factor search model
985
A three-factor search model
986
A three-family standard-like orientifold model: Yukawa couplings and hierarchy Original Research Article
987
A three-family SU(6) type I compactification
988
A three-field (displacement–pressure–concentration) formulation for coupled transport–deformation problems
989
A three-fluid model of two-phase dispersed-annular flow
990
A Threefold RNA–Protein Interface in the Signal Recognition Particle Gates Native Complex Assembly
991
A three-free-parameter class of power series based iterative method for approximation of nonlinear equations solution
992
A Three-generation Reproduction Study on Polyglycerol Polyricinoleate (PGPR) in Wistar Rats
993
A three-hour measurement to evaluate bone calcium turnover
994
A Three-Hybrid Approach to Scanning the Proteome for Targets of Small Molecule Kinase Inhibitors Original Research Article
995
A three-in-one improvement in thermoelectric properties of polyaniline brought by nanostructures
996
A three-input model of the spatial effects of a central-city wage tax
997
A three-invariant cap model with isotropic–kinematic hardening rule and associated plasticity for granular materials
998
A three-invariant cap plasticity model with kinematic hardening rule for powder materials
999
A three-invariant cap plasticity with isotropic–kinematic hardening rule for powder materials: Model assessment and parameter calibration
1000
A three-invariant hardening plasticity for numerical simulation of powder forming processes via the arbitrary Lagrangian-Eulerian FE model
