<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Characterization and functional analysis of a novel PCP gene BcMF5 from Chinese cabbage (Brassica campestris L. ssp. chinensis Makino)
2
Characterization and Functional Analysis of CReMM, a Novel Chromodomain Helicase DNA-binding Protein
3
Characterization and functional analysis of osteoblast-derived fibulins in the human hematopoietic stem cell niche
4
Characterization and functional analysis of serine proteinase and serine proteinase homologue from the swimming crab Portunus trituberculatus
5
Characterization and functional analysis of skin-derived dendritic cells from swine without a requirement for in vitro propagation
6
Characterization and functional analysis of skin-derived dendritic cells from swine without a requirement for in vitro propagation
7
Characterization and Functional Analysis of Two Common Human Cytochrome P450 1B1 Variants
8
Characterization and functional analysis of two PKR genes in fugu (Takifugu rubripes)
9
Characterization and Functional Assessment of Mouse PPARγ1 Promoter
10
Characterization and functional classification of American lobster (Homarus americanus) immune factor transcripts
11
Characterization and functional cloning of an aromatic nitrilase from Pseudomonas putida CGMCC3830 with high conversion efficiency toward cyanopyridine
12
Characterization and functional elucidation of a fucosylated 1,6-α-d-mannogalactan polysaccharide from Antrodia cinnamomea
13
Characterization and Functional Identification of a Novel Plant 4,5-Extradiol Dioxygenase Involved in Betalain Pigment Biosynthesis in Portulaca grandiflora
14
Characterization and Functional Properties of Rice Bran Proteins Modified by Commercial Exoproteases and Endoproteases
15
Characterization and functional properties of soybean high-molecular-mass polysaccharide complex
16
Characterization and further stabilization of a new anti-prelog specific alcohol dehydrogenase from Thermus thermophilus HB27 for asymmetric reduction of carbonyl compounds
17
Characterization and Further Stabilization of Designed Ankyrin Repeat Proteins by Combining Molecular Dynamics Simulations and Experiments
18
Characterization and gas permeability of polyurethane and polyvinyl acetate blend membranes with polyethylene oxide–polypropylene oxide block copolymer
19
Characterization and gas permeation properties of amorphous silica membranes prepared via plasma enhanced chemical vapor deposition
20
Characterization and gas permeation properties of polyimide/ZSM-5 zeolite composite membranes containing ionic liquid
21
Characterization and gas sensitivity study of polyaniline/SnO2 hybrid material prepared by hydrothermal route
22
Characterization and gas transport properties of poly(lactic acid) blend membranes Original Research Article
23
Characterization and gas-sensing properties of nanocrystalline iron(III) oxide films prepared by ultrasonic spray pyrolysis on silicon
24
Characterization and gas-sensing properties of NiO nanowires prepared through hydrothermal method
25
Characterization and gene cloning of telomere-binding protein from tobacco BY-2 cells
26
Characterization and generation of α-dense curves
27
Characterization and Genetic Manipulation of Peptide Synthetases in Pseudomonas aeruginosa PAO1 in Order to Generate Novel Pyoverdines Original Research Article
28
CHARACTERIZATION AND GEOCHRONOLOGY OF THE DELTAIC SYSTEM FROM JEQUITINHONHA RIVER, BRAZIL
29
Characterization and growth mechanism of ZnSe microspheres prepared by hydrothermal synthesis
30
Characterization and growth modeling of ash deposits in coal fired boilers
31
Characterization and haemocompatibility of fluorinated DLC and Si interlayer on Ti6Al4V
32
Characterization and hardness modelling of alternate TIN/TICN multilayer cathodic arc PVD coating on tool steel
33
Characterization and HDS activities of mixed Fe–Mo sulphides supported on alumina and carbon
34
Characterization and HDS Activity of Mesoporous MoS2 Catalysts Prepared by in Situ Activation of Tetraalkylammonium Thiomolybdates
35
Characterization and Health Risk Assessment of Postmenopausal Women with Epilepsy
36
Characterization and health risk assessment of VOCs in occupational environments in Buenos Aires, Argentina
37
Characterization and Hemodynamic Implications of Renal Vascular Angiotensin II Receptors in SHR
38
Characterization and hepatoprotective effect of polysaccharides from Ziziphus jujuba Mill. var. spinosa (Bunge) Hu ex H. F. Chou sarcocarp
39
Characterization and heterogeneity of coarse particles across an urban area
40
Characterization and heterologous expression of a class IIa bacteriocin, plantaricin 423 from Lactobacillus plantarum 423, in Saccharomyces cerevisiae
41
Characterization and heterologous expression of testosterone-inducible regulator from Comamonas testosteroni in Escherichia coli
42
Characterization and HIV-1 Fusion Inhibitory Properties of Monoclonal Fabs Obtained From a Human Non-immune Phage Library Selected Against Diverse Epitopes of the Ectodomain of HIV-1 gp41
43
Characterization and horizontal transfer of class 1 integrons in Salmonella strains isolated from food products of animal origin
44
Characterization and hormonal modulation of immunoreactive thiamin carrier protein secreted by adult rat Leydig cells in vitro
45
Characterization and host range evaluation of Pseudomonas viridiflava from melon, blite, tomato, chrysanthemum and eggplant
46
Characterization and human gingival fibroblasts biocompatibility of hydroxyapatite/PMMA nanocomposites for provisional dental implant restoration
47
Characterization and humidity sensing of ZnO/42° YX LiTaO3 Love wave devices with ZnO nanorods
48
Characterization and humidity sensing properties of Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3 powder synthesized by metal-organic decomposition
49
Characterization and humidity sensitivity of electrospun ZrO2:TiO2 hetero-nanofibers with double jets
50
Characterization and hydration kinetics of tricalcium silicate cement for use as a dental biomaterial
51
Characterization and hydrocracking of gas oil on sulfided NiW/MCM-48 catalyst
52
Characterization and hydrodesulfurization activity of CoMo catalysts supported on boron-doped sol–gel alumina Original Research Article
53
Characterization and hydrodesulfurization activity of CoMo catalysts supported on sol–gel prepared Al2O3 Original Research Article
54
Characterization and hydrodesulfurization properties of catalysts derived from amorphous metal-boron materials
55
Characterization and hydroformylation performance of mesoporous MCM-41-supported water-soluble Rh complex dissolved in ionic liquids
56
Characterization and hydrogen absorption at low temperature of suction-cast Ti45Zr38Ni17 quasicrystalline alloy
57
Characterization and hydrogen gas sensing properties of TiO2 thin films prepared by sol–gel method
58
Characterization and hydroisomerization performance of SAPO-11 molecular sieves synthesized in different media Original Research Article
59
Characterization and hydrotreating performance of NiMo catalysts supported on nanostructured titanate Original Research Article
60
Characterization and hypoglycemic effect of a polysaccharide extracted from the fruit of Lycium barbarum L.
61
Characterization and identification of a “mystery” oil spill from Quebec (1999)
62
Characterization and identification of a chlorine-resistant bacterium, Sphingomonas TS001, from a model drinking water distribution system Original Research Article
63
Characterization and identification of alanine to serine sequence variants in an IgG4 monoclonal antibody produced in mammalian cell lines
64
Characterization and identification of allergen epitopes: recombinant peptide libraries and synthetic, overlapping peptides
65
Characterization and Identification of Asexual Strains of Pythium Associated with Root Rot of Rose in Japan
66
Characterization and identification of candiduria due to Candida species in diabetic patients
67
Characterization and Identification of Cellulolytic Bacteria from gut of Worker Macrotermes gilvus
68
CHARACTERIZATION AND IDENTIFICATION OF EARLY MATURING UPLAND COTTON VARIETIES
69
Characterization and identification of edible oil blends and prediction of the composition by artificial neural networks - a case study
70
Characterization and identification of gamma-irradiated sauces by electron spin resonance spectroscopy using different sample pretreatments
71
Characterization and identification of isomeric flavonoid O-diglycosides from genus Citrus in negative electrospray ionization by ion trap mass spectrometry and time-of-flight mass spectrometry Original Research Article
72
Characterization and identification of lactic acid bacteria from freshwater fishes Original Research Article
73
Characterization and identification of lactic acid bacteria in “morcilla de Burgos”
74
Characterization and identification of lipid-producing microalgae species isolated from a freshwater lake
75
Characterization and identification of microflora from soaked cod and respective salted raw materials Original Research Article
76
Characterization and Identification of Mistakes and Errors Made by Clinic Staffs During Cardio Pulmonary Resuscitation
77
Characterization and identification of pradimicin analogs from Actinomadura hibisca using liquid chromatography–tandem mass spectrometry
78
Characterization and identification of rejection mechanisms in nanofiltration membranes using extended Nernst-Planck model
79
Characterization and identification of steroidal alkaloids in Fritillaria species using liquid chromatography coupled with electrospray ionization quadrupole time-of-flight tandem mass spectrometry
80
Characterization and identification of the chemical constituents from tartary buckwheat (Fagopyrum tataricum Gaertn) by high performance liquid chromatography/photodiode array detector/linear ion trap FTICR hybrid mass spectrometry
81
Characterization and identification of the Detroit River mystery oil spill (2002)
82
Characterization and identification of the nature of two different kinds of secondary relaxation in one glass-former
83
Characterization and imaging of compositional variation in tissues
84
Characterization and immobilization of liposome-bound cellulase for hydrolysis of insoluble cellulose
85
Characterization and immobilization of the laccase from Pleurotus ostreatus and its use for the continuous elimination of phenolic pollutants
86
Characterization and Immunohistochemical Localization of the Glycoconjugates of the Rabbit Bladder Mucosa
87
Characterization and immunomodulatory activity of polysaccharides derived from Dendrobium tosaense
88
Characterization and implementation of mechanical stimulation on isokinetic machines
89
Characterization and implication of potential fugitive dust sources in the Paso del Norte region
90
Characterization and Importance of Air Leak After Lobectomy
91
Characterization and improvement of absorption and scattering by profiled architectural surfaces without specialized test facilities
92
Characterization and improvement of flours of Sudanese wheat cultivars for flat bread making
93
Characterization and improvement of flours of Sudanese wheat cultivars for flat bread making
94
Characterization and improvement of LTCC composite materials for application at elevated temperatures
95
Characterization and improvement of rheological properties of sodium caseinate glycated with galactose, lactose and dextran
96
Characterization and improvement of thin natural diamond detectors for spectrometry of heavy ions below 1 MeV/amu
97
Characterization and improvement of thin natural diamond detectors for spectrometry of heavy ions below 1 MeV/amu
98
Characterization and improvement of water compatibility of γ-LiAlO2 ceramic breeders
99
Characterization and In Silico Analysis of The Structural Features of GCSF Derived from Lysates of Escherichia coli
100
Characterization and in vitro application of nano-crystalline calcia stabilized zirconia (CSZ)/copolymer composites
101
Characterization and in vitro biocompatibility of catanionic assemblies formed with oppositely charged dicetyl amphiphiles
102
Characterization and in vitro biological effects of concentrated particulate matter from Mexico City
103
Characterization and in vitro cytocompatibility of piezoelectric electrospun scaffolds
104
Characterization and in vitro estrogenicity of orthodontic adhesive particulates produced by simulated debonding
105
Characterization and in vitro evaluation of starch based hydrogels as carriers for colon specific drug delivery systems
106
Characterization and in vitro evaluation of starch based hydrogels as carriers for colon specific drug delivery systems
107
Characterization and in vitro properties of potentially probiotic Bifidobacterium strains isolated from breast-milk
108
Characterization and in vitro release kinetics of antimalarials from whey protein‑based hydrogel biocomposites
109
Characterization and in vitro-bioactivity of natural hydroxyapatite based bio-glass–ceramics synthesized by thermal plasma processing
110
Characterization and in vivo evaluation of calcium phosphate coated cp-titanium by dip-spin method
111
Characterization and in vivo evaluation of ketotifen-loaded chitosan microspheres
112
Characterization and in vivo evaluation of ketotifen-loaded chitosan microspheres
113
Characterization and in vivo performance of dextran–spermine polyplexes and DOTAP/cholesterol lipoplexes administered locally and systemically
114
Characterization and Inactivation of Infectious Bursal Disease Virus for Use as a Vaccine and Immunodiagnostic Reagent
115
Characterization and infrared study of the effect of Cr, Mo and W on carbon deposition on platinum/alumina Original Research Article
116
Characterization and inhibition study of MurA enzyme by capillary electrophoresis
117
Characterization and inhibitory effect of antibacterial PAN-based hollow fiber loaded with silver nitrate
118
Characterization and interactions of anodic isolates in microbial fuel cells explored for simultaneous electricity generation and Congo red decolorization
119
Characterization and interconversions of 2-S-ethyl-2-thio-d-mannose diethyl dithioacetal and the facile epimerization of 2-thio-d-mannopyranose derivatives
120
Characterization and inventory of PCDD/F emissions from coal-fired power plants and other sources in Taiwan Original Research Article
121
Characterization and investigation mechanism of hydrothermal stability for micropore-free ordered mesoporous molecular sieves
122
Characterization and Investigation of Antibacterial Activity of Injectable Hydroxyapatite-Alginate Hydrogel
123
CHARACTERIZATION AND INVESTIGATION OF COMPOSITE RESISTIVE GRATING
124
Characterization and Investigation of Grain Selection in Spiral Grain Selectors during Casting Single-Crystal Turbine Blades
125
Characterization and Investigation of Substrate Specificity of the Sugar Aminotransferase WecE from E. coli K12 Original Research Article
126
Characterization and investigation of the mesogenic, thermo-morphologic and thermotropic properties of new chiral (S)-5-octyloxy-2-[{4-(2-methylbuthoxy)-phenylimino(methyl]phenol liquid crystalline compound
127
Characterization and investigation on the difference of hydrothermal stability for ordered mesoporous aluminosilicate sieves
128
Characterization and ion-exchange behavior of thermally stable nano-composite polyaniline zirconium titanium phosphate: Its analytical application in separation of toxic metals Original Research Article
129
Characterization and ionic conductivity measurement of poly(2-vinyl pyridinium) salt in solid state
130
Characterization and ion-induced degradation of cross-linked poly(methyl methacrylate) studied using time of flight secondary ion mass spectrometry
131
Characterization and isolation of some genes of the shikimate pathway in sensitive and resistant Centaurea jacea plants after ozone exposure
132
Characterization and Isomorphisms of Endomorphism Rings of Locally Free Modules Original Research Article
133
Characterization and Isomorphisms of Endomorphism Rings of Locally Free Modules Original Research Article
134
Characterization and kinetic analysis of enzyme-substrate recognition by three recombinant lactococcal PepVs
135
Characterization and kinetic investigation of electroless deposition of pure cobalt thin films on silicon substrates
136
Characterization and kinetic properties of the purified Trematosphaeria mangrovei laccase enzyme
137
Characterization and Kinetic Studies on the Highly Active Ammoxidation Catalyst MoVNbTeOx
138
Characterization and kinetic study of carbon-based briquettes for the reduction of NO Original Research Article
139
Characterization and Kinetic Study of PAH–Degrading Sphingopyxis ummariensis Bacteria Isolated from a Petrochemical Wastewater Treatment Plant
140
Characterization and kinetics of reduction of CaSO4 with carbon monoxide for chemical-looping combustion
141
Characterization and kinetics of surface area reduction during the calcination of dredged sediments
142
Characterization and land application of red gypsum: a waste product from the titanium dioxide industry
143
Characterization and Langmuir film properties of asphaltenes extracted from Arabian light crude oil
144
Characterization and leaching behaviour of lizardite in Yuanjiang laterite ore
145
Characterization and leaching of NiCd and NiMH spent batteries for the recovery of metals
146
Characterization and leaching of real fluorescent lamp waste for the recovery of rare earth metals and mercury
147
Characterization and lectin microarray of an immunomodulatory heteroglucan from Pleurotus ostreatus mycelia
148
Characterization and lime treatment of olive mill wastewater
149
Characterization and low-temperature sintering of Ni0.5Zn0.5Fe2O4 nano-powders prepared by refluxing method
150
Characterization and luminescence properties of a novel green emitting CaB2O4:Tb3+, Li+ phosphor
151
Characterization and luminescence properties of sol–gel derived M′-type LuTaO4:Ln3+ (Ln = Pr, Sm, Dy) phosphors
152
Characterization and Lytic Activity of Isolated Escherichia Coli Bacteriophages against Escherichia Coli in Vitro
153
Characterization and machining of alumina ceramic reinforced with lanthanum phosphate
154
Characterization and magnetic coercivity of nanostructured (Fe50Co50)100-XVX= 0,2,4 powders containing a small amount of Co3V intermetallic obtained by mechanical alloying
155
Characterization and magnetic investigations of germanium-doped lithium ferrite
156
Characterization and magnetic properties of carbon-coated cobalt nanocapsules synthesized by the chemical vapor-condensation process Original Research Article
157
Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties
158
Characterization and magnetic properties of nanocrystalline CuFe2O4, NiFe2O4, ZnFe2O4 powders prepared by the Aloe vera extract solution
159
Characterization and magnetic properties of polyethylene glycol modified NiZn ferrite thin films
160
Characterization and magnetic properties of Sm- and Gd-substituted CoFe2O4 nanoparticles prepared by forced hydrolysis in polyol
161
Characterization and magnetic response of multiwall carbon nanotubes filled with iron nanoparticles of different aspect ratios
162
Characterization and management of industrial hazardous waste in Qom province
163
Characterization and management of solid medical wastes in the Federal Capital Territory, Abuja Nigeria
164
Characterization and Manipulation of the Electroosmotic Flow in Porous Anodic Alumina Membranes
165
Characterization and Manipulation of the Pseudomonas aeruginosa Dimethylarginine Dimethylaminohydrolase Monomer–Dimer Equilibrium
166
Characterization and mapping of canine microsatellites isolated from BAC clones harbouring DNA sequences homologous to seven human genes
167
Characterization and mapping of DNA damage induced by reactive metabolites of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) at nucleotide resolution in human genomic DNA
168
Characterization and mapping of waste from coffee and eucalyptus production in Brazil for thermochemical conversion of energy via gasification
169
Characterization and material model definition of toughened adhesives for finite element analysis
170
Characterization and mathematical modelling of single fluidised particle coating
171
Characterization and measurement of a nonequilibrium temperature-like variable in irreversible thermodynamics
172
Characterization and meat freshness application of a serial three-enzyme reactor system measuring ATP-degradative compounds Original Research Article
173
Characterization and mechanical behavior of ceramic rings
174
Characterization and mechanical modeling of the abrasion properties of sintered tools with embedded hard particles
175
Characterization and mechanical properties of coatings on magnesium by micro arc oxidation
176
Characterization and mechanical properties of high density polyethylene/silane montmorillonite nanocomposites
177
Characterization and mechanical properties of in situ synthesized Ti5Si3/TiAl composites
178
Characterization and mechanical properties of ion-implanted diamond surfaces
179
Characterization and mechanical properties of phosphate-kaolin clay
180
Characterization and mechanical properties of the duplex coatings produced on steel by electro-spark deposition and micro-arc oxidation
181
Characterization and mechanical testing of alumina-based nanocomposites reinforced with niobium and/or carbon nanotubes fabricated by spark plasma sintering Original Research Article
182
Characterization and mechanical/tribological properties of nano Au–TiO2 composite thin films prepared by a sol–gel process
183
Characterization and mechanism analysis of activated carbon fiber felt-stabilized nanoscale zero-valent iron for the removal of Cr(VI) from aqueous solution
184
Characterization and mechanism analysis of N doped TiO2 with visible light response and its enhanced visible activity
185
Characterization and Mechanisms of Thymic Atrophy in Protein-Malnourished Mice: Role of Corticosterone
186
Characterization and mechanistic studies of the dehydrogenation of NHxBHx materials
187
Characterization and MEMS application of low temperature TiNi(Cu) shape memory thin films
188
Characterization and micro- and ultra-structural analysis of PET-based Co-rolled composite electrolytic chromium coated steel (ECCS)
189
Characterization and microbial utilization of dissolved organic carbon in groundwater contaminated with chlorophenols
190
Characterization and microporosity analysis of mesoporous carbon molecular sieves by nitrogen and organics adsorption
191
Characterization and microstructural evolution of SiC(OAl) fibers to SiC(Al) fibers derived from aluminum-containing polycarbosilane
192
Characterization and microstructure of films made from mucilage of Salvia hispanica and whey protein concentrate Original Research Article
193
Characterization and Microstructure of PLZT RAINBOW Ceramics
194
Characterization and microwave absorption properties of ternary FeCl3–NiCl2–GICs
195
Characterization and microwave dielectric properties of a new A6B5O18-type cation-deficient perovskite Ba4Nd2Ti3Nb2O18
196
Characterization and microwave dielectric properties of TiO2-modified 0.65CaTiO3–0.35Sm0.9Nd0.1AlO3 ceramics
197
Characterization and mode of action of two acetyl xylan esterases from Chrysosporium lucknowense C1 active towards acetylated xylans
198
Characterization and modeling of a crude oil desalting plant by a statistically designed approach
199
Characterization and modeling of a low background HPGe detector
200
Characterization and modeling of a low background HPGe detector
201
Characterization and modeling of a martensitic transformation in a platinum modified diffusion aluminide bond coat for thermal barrier coatings Original Research Article
202
Characterization and modeling of a new via structure in multilayered printed circuit boards
203
Characterization and modeling of a scroll expander with air and ammonia as working fluid
204
Characterization and modeling of air muscles
205
Characterization and Modeling of Aluminum Extrusion Damage Under Crash Loading
206
Characterization and modeling of burr formation in micro-end milling
207
Characterization and modeling of compliant active materials
208
Characterization and modeling of creep mechanisms in Zircaloy-4
209
Characterization and modeling of diffusion process for mass transport through the Tournemire argillites (Aveyron, France)
210
Characterization and modeling of direct-write fabrication of microscale polymer fibers
211
Characterization and modeling of high-voltage field-stop IGBTs
212
Characterization and modeling of in-building power lines for high-speed data transmission
213
Characterization and modeling of mechanical behavior of polymer/clay nanocomposites
214
Characterization and modeling of mechanical behavior of polymer/clay nanocomposites
215
Characterization and modeling of mechanical behavior of quenching and partitioning steels
216
Characterization and modeling of micromixing performance in micropore dispersion reactors
217
Characterization and modeling of monolithic stationary phases: application to preparative chromatography
218
Characterization and modeling of nonlinear hydrophobic interaction chromatographic systems
219
Characterization and modeling of non-uniform charge collection in CVD diamond pixel detectors
220
Characterization and modeling of non-uniform charge collection in CVD diamond pixel detectors
221
Characterization and modeling of nutrient-deficient tomato-processing wastewater treatment using an anaerobic/aerobic system
222
Characterization and Modeling of Parasitic Emission in Deep Submicron CMOS.
223
Characterization and modeling of precipitation kinetics in an Al–Zn–Mg alloy
224
Characterization and modeling of precipitation kinetics in an Al–Zn–Mg alloy
225
Characterization and modeling of protein–protein interaction networks
226
Characterization and modeling of pyrolysis of the two-phase olive mill solid waste
227
CHARACTERIZATION AND MODELING OF SCHOTTKY DIODES UP TO 110 GHZ FOR USE IN BOTH FLIP-CHIP AND WIRE-BONDED ASSEMBLED ENVIRONMENTS
228
Characterization and modeling of silicon integrated spiral inductors for high-frequency applications
229
CHARACTERIZATION AND MODELING OF SOLITONTRANSMISSION AT 2.5 GB/S OVER 200 KM
230
Characterization and modeling of stiffness reduction in SCS-6-Ti composites under low cycle fatigue loading
231
Characterization and modeling of stiffness reduction in SCS-6-Ti composites under low cycle fatigue loading
232
Characterization and modeling of strain assisted diffusion in an epoxy adhesive layer
233
Characterization and modeling of the A- and B-granule starches of wheat, triticale, and barley
234
Characterization and modeling of the anisotropic damage of a high-explosive composition
235
Characterization and modeling of the cemented sediment surrounding the Iulia Felix glass
236
Characterization and modeling of the influence of artificial aging on the microstructural evolution of age-hardenable AlSi10Mg(Cu) aluminum alloys
237
Characterization and modeling of the metal diffusion from deep ultraviolet photoresist and silicon-based substrate
238
Characterization and modeling of the static and dynamic friction in a damper
239
Characterization and modeling of TIPS-pentacene-poly(3-hexyl) thiophene blend organic thin film transistor
240
Characterization and modeling of transient device behavior under CDM ESD stress ☆
241
Characterization and modeling of transition edge sensors for high resolution X-ray calorimeter arrays
242
Characterization and modeling of transition edge sensors for high resolution X-ray calorimeter arrays
243
Characterization and modeling of weighted networks
244
Characterization and modeling the thermo-mechanical cure-dependent properties of epoxy molding compound
245
Characterization and modelling of 3D piezoelectric ceramic structures with ATILA software
246
Characterization and modelling of a carbon ramming mix used in high-temperature industry
247
Characterization and modelling of a family of cyclone aerosol preseparators
248
Characterization and modelling of a gasoline containing 1,1-dimethylethyl methyl ether (MTBE), diisopropyl ether (DIPE) or 1,1-dimethylpropyl methyl ether (TAME) as fuel oxygenate based on new isothermal binary vapour–liquid data
249
Characterization and modelling of diffusion and reaction of low molecular weight reactants in molten polymer
250
Characterization and modelling of failure initiation in DP steel
251
Characterization and modelling of guillotine constraints
252
Characterization and modelling of signal dynamics in 3D-DDTC detectors
253
Characterization and modelling of signal dynamics in 3D-DDTC detectors
254
Characterization and modelling of the grinding process of metal matrix composites
255
Characterization and modelling of the residual stresses induced by belt finishing on a AISI52100 hardened steel
256
Characterization and modification of porous ceramic sorbent for arsenate removal
257
Characterization and modulation of canine mast cell derived eicosanoids
258
Characterization and modulation of canine mast cell derived eicosanoids
259
Characterization and Molecular Identification of Extracellular Polymeric Substance (EPS) Producing Bacteria from Activated Sludge
260
Characterization and molecular modelling of an engineered organic solvent tolerant, thermostable lipase with enhanced enzyme activity
261
Characterization and molecular weight distribution of carbohydrates isolated from the autohydrolysis extract of mixed southern hardwoods
262
Characterization and monitoring of cement-based systems using intrinsic electrical property measurements
263
CHARACTERIZATION and MORPHOLOGICAL ANALYSIS OF AEROSOLS IN TEHRAN TRAFFIC ZONE
264
Characterization and morphological analysis of airborne PM2.5 and PM10 in Agra located in north central India
265
Characterization and morphological analysis of pearlite in a eutectoid steel
266
Characterization and Morphological Properties of Glass Fiber Reinforced Epoxy Composites Fabricated Under Varying Degrees of Hand Lay-Up Techniques
267
Characterization and morphology analysis of degradable poly(l-lactide) film in in-vitro gastric juice incubation
268
Characterization and morphology control of poly(p-phenylenediamine) nanofibers: A novel, simple and highly selective fluorescent probe for thiols
269
Characterization and morphology of atherosclerotic plaque of coronary arteries: Utility of electron-beam tomography to detect non-calcified plaque: A comparison with conventional coronary angiography and intravascular ultrasound
270
Characterization and mucosal responses of interleukin 17 family ligand and receptor genes in channel catfish Ictalurus punctatus
271
Characterization and multi-mode liquid chromatographic application of 4-propylaminomethyl benzoic acid bonded silica—A zwitterionic stationary phase
272
Characterization and multiplexing of correlated traffic from sources with different time constants
273
Characterization and Mutational Analysis of the RecQ Core of the Bloom Syndrome Protein
274
Characterization and nanoindentation testing of thin ZrO2 films synthesized using layer-by-layer (LbL) deposited organic templates
275
Characterization and nano-mechanical properties of tribofilms using Cu nanoparticles as additives
276
Characterization and NO decomposition activity of Cu-MFI zeolite in relation to redox behavior Original Research Article
277
Characterization and non-isothermal decomposition kinetics of some Turkish bituminous coals by thermal analysis
278
Characterization and nonlinear optical properties of a poly(acrylic acid)–surfactant–multi-walled carbon nanotube complex
279
Characterization and nonlinear optical properties of PVP/TiO2 nano-fibers doping with Ag colloid nano-particles
280
Characterization and nonlinear optical property of a multi-walled carbon nanotube/silica xerogel composite
281
Characterization and Nucleotide Sequence of the Cardiac α-Myosin Heavy Chain Gene from Syrian Hamster
282
Characterization and numerical evaluation of vibration on elastic–viscoelastic sandwich structures
283
Characterization and numerical modeling of high strain rate mechanical behavior of Ti-15-3 alloy for machining simulations
284
Characterization and nutrient evaluation of wet and dried wheat distillers’ grain for growing pigs
285
Characterization and occurrence of Zucchini Yellow Mosaic Virus in Sudan
286
Characterization and optical properties of (Gd1−x, Prx)2O2S nano-phosphors synthesized using a novel co-precipitation method
287
Characterization and optical properties of nano-ceria synthesized by surfactant-mediated precipitation technique in mixed solvent system
288
Characterization and optical properties of pole-like nano-CeO2 synthesized by a facile hydrothermal method
289
Characterization and optical properties of sol–gel processed PMMA/SiO2 hybrid monoliths
290
Characterization and optical studies of PVP-capped silver nanoparticles
291
Characterization and optimization analysis of a BNCT biological facility
292
Characterization and optimization by experimental design of a liquid chromatographic method for the separation of hydroxylated polychlorinated biphenyls on a polar-embedded stationary phase
293
Characterization and optimization of a bipolar ESD-device by measurements and simulations
294
Characterization and optimization of a bipolar ESD-device by measurements and simulations
295
Characterization and optimization of a chromatographic process based on ethylenediamine-N,N,N′,N′-tetra(methylphosphonic) acid-modified zirconia particles
296
Characterization and optimization of a plasma doping process using a pulsed RF-excited B2H6 plasma system
297
Characterization and optimization of an oscillatory baffled reactor (OBR) for ozone-water mass transfer
298
Characterization and optimization of calcium and phosphate based material for mitigation of fluoride in ground water
299
Characterization and optimization of carbohydrate production from an indigenous microalga Chlorella vulgaris FSP-E
300
Characterization and optimization of carbon nanotube electrodes produced by magnetic entrapment: Application to paracetamol detection
301
Characterization and optimization of image quality as a function of reconstruction algorithms and parameter settings in a Siemens Inveon small-animal PET scanner using the NEMA NU 4-2008 standards
302
Characterization and optimization of image quality as a function of reconstruction algorithms and parameter settings in a Siemens Inveon small-animal PET scanner using the NEMA NU 4-2008 standards
303
Characterization and optimization of indium tin oxide films for heterojunction solar cells
304
Characterization and optimization of La0.8Sr0.2Sc0.1Mn0.9O3−δ-based composite electrodes for intermediate-temperature solid-oxide fuel cells
305
Characterization and Optimization of L-Malic Acid Production by Some Clinical Isolates of Aureobasidium pullulans
306
Characterization and optimization of long-term controlled release system for groundwater remediation: A generalized modeling approach Original Research Article
307
Characterization and optimization of lyophilization and storage conditions of Leech saliva extract from the tropical leech Hirudinaria manillensis
308
Characterization and optimization of orbital drilling of woven carbon fiber reinforced epoxy laminates
309
Characterization and optimization of poly(glycidyl methacrylate-co-styrene) synthesized by atom transfer radical polymerization
310
Characterization and optimization of porogen-based PECVD deposited extreme low-k materials as a function of UV-cure time
311
Characterization and optimization of production of exopolysaccharide from Chlamydomonas reinhardtii
312
Characterization and optimization of pyroelectric X-ray sources using Monte Carlo spectral models
313
Characterization and optimization of pyroelectric X-ray sources using Monte Carlo spectral models
314
Characterization and optimization of RGD-containing silk blends to support osteoblastic differentiation
315
Characterization and optimization of SAPO-34 catalysts synthesized by mixed templates in MTO reaction
316
Characterization and Optimization of silicon photomultipliers for the development of intraoperative beta probes
317
Characterization and Optimization of silicon photomultipliers for the development of intraoperative beta probes
318
Characterization and optimization of the dynamic tool path of a highly dynamic micromilling machine
319
Characterization and optimization of the interface quality in amorphous/crystalline silicon heterojunction solar cells
320
Characterization and optimization of the thermal performance of miniature piezoelectric fans
321
Characterization and Optimization of Using Calendula Officinalis Extract in The Fabrication of Polycaprolactone/Gelatin Electrospun Nanofibers for Wound Dressing Applications
322
Characterization and optimization of vibration-assisted drilling of fibre reinforced epoxy laminates
323
Characterization and optimization of β-galactosidase immobilization process on a mixed-matrix membrane
324
Characterization and organic vapor sensing properties of Langmuir–Blodgett film using a new three oxygen-linked phthalocyanine incorporating lutetium
325
Characterization and origin identification of 2,4,6-trinitrotoluene through its by-product isomers by liquid chromatography–atmospheric pressure chemical ionization mass spectrometry
326
Characterization and origin of late Devonian illitic clay deposits southwestern Iran
327
Characterization and origin of permeability–porosity heterogeneity in shallow-marine carbonates: From core scale to 3D reservoir dimension (Middle Jurassic, Paris Basin, France)
328
Characterization and Origin of Selected Basaltic Outcrops in Harrat Irbid (HI), Northern Jordan
329
Characterization and origin of spongillite-hosting sediment from Joمo Pinheiro, Minas Gerais, Brazil
330
Characterization and osteogenic activity of a silicatein/biosilica-coated chitosan-graft-polycaprolactone
331
Characterization and overexpression of a [FeFe]-hydrogenase gene of a novel hydrogen-producing bacterium Ethanoligenens harbinense
332
Characterization and oxidation behavior of MTCVD Ti–B–N coatings
333
Characterization and oxidation behavior of NiCoCrAlY coating fabricated by electrophoretic deposition and vacuum heat treatment
334
Characterization and oxidation behavior of silicide coating on multiphase Mo–Si–B alloy
335
Characterization and oxidation of chromium(III) by sodium hypochlorite in alkaline solutions
336
Characterization and oxidation properties of biomorphic porous carbon with SiC gradient coating prepared by PIP method
337
Characterization and oxidation states of Cu and Pd in Pd–CuO/ZnO/ZrO2 catalysts for hydrogen production by methanol partial oxidation Original Research Article
338
Characterization and oxidative addition reactions of rhodium(I) carbonyl cupferrate diphenyl-2-pyridylphoshine complexes
339
Characterization and Parasitic Extraction of EMI Filters Using Scattering Parameters.
340
Characterization and partial genome sequence analysis of Clostera anachoreta granulovirus
341
Characterization and partial purification of acyl-CoA:glycerol 3-phosphate acyltransferase from sunflower (Helianthus annuus L.) developing seeds
342
Characterization and partial purification of an antibacterial agent from halophilic actinomycetes Kocuria sp. strain rsk4
343
Characterization and Partial Purification of Microsomal NAD(P)H:Quinone Oxidoreductases
344
Characterization and partial purification of proteinases from the highly alkaline midgut of the humivorous larvae of Pachnoda ephippiata (Coleoptera: Scarabaeidae)
345
Characterization and partial purification of proteinases from the highly alkaline midgut of the humivorous larvae of Pachnoda ephippiata (Coleoptera: Scarabaeidae)
346
Characterization and partial sequence of a new furovirus of wheat in China
347
Characterization and partial synthesis of the behavior of resistive circuits at their terminals
348
Characterization and pathogenicity of Alternaria spp. strains associated with grape bunch rot during post-harvest withering
349
Characterization and Pathogenicity of Rhizoctonia spp. from Onion in Amasya, Turkey
350
Characterization and pathological diversity of Colletotrichum species associated with anthracnose disease on mango in Peninsular Malaysia
351
Characterization and pattering of bacteriorhodopsin films on Si-based materials
352
Characterization and Pattern of Culling in Goats
353
Characterization and pattern recognition of oil–sand naphthenic acids using comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry
354
Characterization and PCR application of a new high-fidelity DNA polymerase from Thermococcus waiotapuensis
355
Characterization and PCR application of a thermostable DNA polymerase from Thermococcus pacificus
356
Characterization and PCR applications of dUTPase from the hyperthermophilic euryarchaeon Thermococcus pacificus
357
Characterization and PCR optimization of the thermostable family B DNA polymerase from Thermococcus guaymasensis
358
Characterization and PCR performance of a family B-type DNA polymerase from the hyperthermophilic crenarchaeon Staphylothermus marinus
359
Characterization and PCR-based Typing of Xanthomonas campestris pv. vesicatoria from Peppers and Tomatoes in Serbia
360
Characterization and PEMFC application of a mesoporous sulfonated silica prepared from two precursors, tetraethoxysilane and phenyltriethoxysilane
361
Characterization and performance analysis of silicon carbide electrolyte matrix of phosphoric acid fuel cell prepared by ball-milling method
362
Characterization and Performance Comparison of Ripple-Based Control for Voltage Regulator Modules
363
Characterization and performance evaluation of a full-scale activated carbon-based dynamic botanical air filtration system for improving indoor air quality
364
Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite
365
Characterization and performance evaluation of Pt–Ru electrocatalysts supported on different carbon materials for direct methanol fuel cells
366
Characterization and performance for propane oxidative dehydrogenation of Li-modified MoO3/Al2O3 catalysts Original Research Article
367
Characterization and performance of (La,Ba)(Co,Fe)O3 cathode for solid oxide fuel cells with iron–chromium metallic interconnect
368
Characterization and performance of a commercial thin film nanocomposite seawater reverse osmosis membrane and comparison with a thin film composite
369
CHARACTERIZATION AND PERFORMANCE OF A HPGe DETECTOR FOR NUCLEAR MATERIALS VERIFICATION
370
Characterization and performance of a ZnO–ZnCr2O4/CeO2–ZrO2 monolithic catalyst for methanol auto-thermal reforming process
371
Characterization and performance of different types of hollow fibre membranes in a laboratory-scale MBR for the treatment of industrial wastewater Original Research Article
372
Characterization and performance of glass–ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs
373
Characterization and performance of high power iron(VI) ferrate batteries
374
Characterization and performance of injection molded poly(methylmethacrylate) microchips for capillary electrophoresis
375
Characterization and performance of laser melted AZ91D and AM60B
376
Characterization and performance of laser melted AZ91D and AM60B
377
Characterization and performance of membranes designed for macroencapsulation/implantation of pancreatic islet cells
378
Characterization and performance of MOCVD grown 0.14-μm InP-HEMTs for low voltage applications
379
Characterization and performance of Pd-La/spinel catalyst for preparation of 2,6-diisopropylaniline Original Research Article
380
Characterization and performance of proton exchange membranes for direct methanol fuel cell: Blending of sulfonated poly(ether ether ketone) with charged surface modifying macromolecule
381
Characterization and performance of Pt-USY in the SCR of NOx with hydrocarbons under lean-burn conditions
382
Characterization and performance of silicon n-in-p pixel detectors for the ATLAS upgrades
383
Characterization and performance of silicon n-in-p pixel detectors for the ATLAS upgrades
384
Characterization and performance of V2O5–TiO2 catalysts prepared by rapid combustion method
385
Characterization and performance of visible light photon counters (VLPCs) for the upgraded Dط detector at the Fermilab Tevatron
386
Characterization and performance of visible light photon counters (VLPCs) for the upgraded Dط detector at the Fermilab Tevatron
387
Characterization and performance study of IP traffic in WDM networks
388
Characterization and performance study on chitosan-functionalized multi walled carbon nano tube as separator in microbial fuel cell
389
Characterization and performances of a monitoring ionization chamber dedicated to IBA-universal irradiation head for Pencil Beam Scanning
390
Characterization and performances of a monitoring ionization chamber dedicated to IBA-universal irradiation head for Pencil Beam Scanning
391
Characterization and performances of an Algerian diatomite-based gas chromatography support
392
Characterization and Permeation of Microfabricated Palladium Membrane
393
Characterization and permeation of microporous poly(ε-caprolactone) films
394
Characterization and perturbation of Gabor frame sequences with rational parameters Original Research Article
395
Characterization and pervaporation dehydration of heat-treatment PAN hollow fiber membranes
396
Characterization and Pharmacological Activities of Jellyfish, Chrysaora hysoscella Captured in Bushehr Port, Iran
397
Characterization and pharmacological potential of Lactobacillus sakei 1I1 isolated from fresh water fish Zacco koreanus
398
Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method
399
Characterization and phase transitions of (Bi,Pb)2Sr2Ca2Cu3Ox–Ag composite powder obtained by spray pyrolysis
400
Characterization and phenols sorptive properties of carbons activated by sulphuric acid
401
Characterization and phosphate stabilization of dusts from the vitrification of MSW combustion residues
402
Characterization and phosphorus removal of poly-silicic-ferric coagulant Original Research Article
403
Characterization and photocatalysis of Eu3+–TiO2 sol in the hydrosol reaction system
404
Characterization and photocatalytic activity of (ZnO–CuO)/SBA-15 nanocomposites synthesized by two-solvent method
405
Characterization and photocatalytic activity of Au/TiO2 thin films for azo-dye degradation
406
Characterization and photocatalytic activity of Bi3TiNbO9 nanocrystallines synthesized by sol–gel process
407
Characterization and photocatalytic activity of Fe- and N-co-deposited TiO2 and first-principles study for electronic structure
408
Characterization and photocatalytic activity of mesoporous TiO2 prepared from an ethanol–diethyl ether binary solvent system
409
Characterization and photocatalytic activity of nitrogen-doped titanium(IV) oxide prepared by doping titania with TiN powder Original Research Article
410
Characterization and photocatalytic activity of noble-metal-supported surface TiO2/SiO2 Original Research Article
411
Characterization and photocatalytic activity of transition-metal-supported surface bond-conjugated TiO2/SiO2
412
Characterization and photocatalytic activity of Zn2+–TiO2/AC composite photocatalyst
413
Characterization and Photocatalytic Activity of ZnO, ZnS, ZnO/ZnS, CdO, CdS and CdO/CdS Nanoparticles in Mesoporous SBA-15
414
Characterization and photocatalytic activity of ZnSe nanoparticles synthesized by a facile solvothermal method, and the effects of different solvents on these properties
415
Characterization and Photo-catalytic Efficiency of MnFe2O4/ Zn2SiO4 for Aniline Degradation Using Box-Behnken Experimental Design and Simulated Solar Radiation
416
Characterization and photocatalytic properties of hexagonal and monoclinic WO3 prepared via microwave-assisted hydrothermal synthesis
417
Characterization and photocatalytic properties of nanoporous titanium dioxide layer fabricated on pure titanium substrates by the anodic oxidation process
418
Characterization and Photocatalytic Properties of Titanium-Containing Mesoporous SBA-15
419
Characterization and photo-chemical applications of nano-ZnO prepared by wet chemical and thermal decomposition methods
420
Characterization and photoconductivity study of TiOPc nanoscale particles prepared by liquid phase direct reprecipitation
421
Characterization and photoconductivity study of well-defined C60 terminated poly(tert-butyl acrylate-b-styrene)
422
Characterization and photodegradation characteristics of organic dye for Pt–titania combined multi-walled carbon nanotube composite catalysts
423
Characterization and photoluminescence of Lu2O3-Eu3+ nano-phosphor prepared by modified solution combustion method
424
Characterization and photoluminescence properties of some MLn2(1−x)O4:2xEu3+ or 2xTb3+ systems (M=Ba or Sr, Ln=Gd or La)
425
Characterization and photoluminescent properties of sol–gel-derived Ca2(1−x)La7.6+x(SiO4)6O2:Eu0.4, Lix phosphors
426
Characterization and photonic properties for the Pt-fullerene/TiO2 composites derived from titanium (IV) n-butoxide and C60
427
Characterization and photooxidative behaviour of nanocomposites formed with polystyrene and LDHs organo-modified by monomer surfactant
428
Characterization and Photophysical Properties of Natural Anthraquinone Dyes in Borneo Traditional Pua Kumbu Textile
429
Characterization and photophysical properties of sulfur-oxidized diarylethenes
430
Characterization and photoreactivity of N-, S-, and C-doped ZnO under UV and visible light illumination
431
Characterization and phylogenetic analysis of biodemulsifier-producing bacteria
432
Characterization and Phylogenetic Analysis of Magnaporthe spp. strains on Various Hosts in Iran
433
Characterization and phylogenetic analysis of the chitinase gene from the Helicoverpa armigera single nucleocapsid nucleopolyhedrovirus
434
Characterization and Phylogenetic Analysis of the Genes Coding for High Molecular Weight Glutenin Subunits in Three Diploid Species of Aegilops
435
Characterization and phylogenetic analysisof a g-type lysozyme gene variant from the skin mucus of grass carp (Ctenopharyngodon idella)
436
Characterization and Physical Mapping of Ribosomal RNA Gene Families in Plantago
437
Characterization and physical properties of Li2O–CaF2–P2O5 glass ceramics with Cr2O3 as a nucleating agent—Physical properties
438
Characterization and Physical Properties of PbO–As2O3 Glasses Containing Molybdenum Ions
439
Characterization and physical properties of the indides Yb2T2In (T=Cu, Pd, Au)
440
Characterization and physicochemical properties of a lipase from Pseudomonas mendocina 3121-1
441
Characterization and pilot scale fluidized bed gasification of herbaceous biomass: A case study on alfalfa pellets
442
Characterization and Plasmid Profiling of Salmonella Enteritidis Isolated from Broiler Chickens
443
Characterization and polymorphism screening of IGF-I and prolactin genes in Nelore heifers
444
Characterization and Possible Industrial Applications of Tripoli Outcrops at Al-Karak Province.
445
Characterization and possible uses of ashes from wastewater treatment plants
446
Characterization and potent bactericidal effect of Cobalt doped Titanium dioxide nanofibers
447
Characterization and potential applications of high molecular weight dextran produced by Leuconostoc mesenteroides AA1
448
Characterization and potential applications of nanostructured aqueous dispersions
449
Characterization and potential applications of pyrolytic char from ablative pyrolysis of used tires
450
Characterization and potential applications of solid particles produced at a biomass gasification plant
451
Characterization and potential uses of Copaifera langsdorfii seeds and seed oil
452
Characterization and Potentials of Indigenous Oil-Degrading Bacteria Inhabiting the Rhizosphere of Wild Oat (Avena Fatua L.) in South West of Iran
453
Characterization and pozzolanic properties of calcined alum sludge
454
Characterization and pozzolanicity of zeolitic rocks from two Cuban deposits
455
Characterization and prediction of abrasive wear of powder composite materials
456
Characterization and prediction of highway runoff constituent event mean concentration
457
Characterization and prediction of microstructure in Al–Zn–Mg alloys
458
Characterization and prediction of runoff dynamics: a nonlinear dynamical view
459
Characterization and prediction of subsurface pneumatic response at Yucca Mountain, Nevada
460
Characterization and prediction of two-phase flow regimes in miniature tubes
461
Characterization and Preferred Oviposition sites of Atherigona orientalis (Schiner) on Nigerian Pepper Fruits
462
Characterization and Preliminary Evaluation of Ester-Modified Technetium-99m SNS/S Mixed Ligand Complexes as Potential Brain Perfusion Agents
463
Characterization and preparation of core–shell type nanoparticle for encapsulation of anticancer drug
464
Characterization and preparation of highly stable aggregates of a novel type of hydrolase (BL28) from Bacillus licheniformis
465
Characterization and preparation of NiO-V2O5 composite film cathodes
466
Characterization and preservations of the variance inactivity time ordering and the increasing variance inactivity time class
467
Characterization and Prevalence of a Polymorphism in the 3′ Untranslated Region of Cytochrome P4501A1 in Cancer-Prone Atlantic Tomcod
468
Characterization and prevention of child pedestrian accidents: An overview
469
Characterization and prevention of interfacial crud produced during the extraction of vanadium and chromium by primary amine
470
Characterization and probiotic potential of Lactobacillus plantarum strains isolated from cheeses Original Research Article
471
Characterization and process development of the Nile diatomaceous sediment
472
Characterization and process effects of HfO2 thin films grown by metal-organic molecular beam epitaxy
473
Characterization and processing of High Density Polyethylene/carbon nano-composites
474
Characterization and processing of iron ore fines of Kiriburu deposit of India
475
Characterization and production of Ceiba pentandra biodiesel and its blends
476
Characterization and production of the exopolysaccharide (EPS) from Pseudomonas aeruginosa G1 and Pseudomonas putida G12 strains
477
Characterization and production of the exopolysaccharide (EPS) from Pseudomonas aeruginosa G1 and Pseudomonas putida G12 strains
478
Characterization and properties of a modified Si solar cell emitter by a porous Si layer
479
Characterization and properties of a polythiophene with a malonic acid dimethyl ester side group
480
Characterization and properties of a red and orange Y2O2S-based long afterglow phosphor
481
Characterization and properties of Acacia senegal (L.) Willd. var. senegal with enhanced properties (Acacia (sen) SUPER GUM™): Part 1—Controlled maturation of Acacia senegal var. senegal to increase viscoelasticity, produce a hydrogel form and convert a p
482
Characterization and properties of Acacia senegal (L.) Willd. var. senegal with enhanced properties (Acacia (sen) SUPER GUM™): Part 2—Mechanism of the maturation process
483
Characterization and properties of Acacia senegal (L.) Willd. var. Senegal with enhanced properties (Acacia (sen) SUPER GUM™): Part 5. Factors affecting the emulsification of Acacia senegal and Acacia (sen) SUPER GUM™
484
Characterization and properties of acid phosphatases with phytase activity produced by Aspergillus caespitosus
485
Characterization and properties of amorphous carbon coatings prepared by middle frequency pulsed unbalanced magnetron sputtering at different substrate bias
486
Characterization and Properties of Amorphous Nonstoichiometric Ge1-x-Cx:H Compounds Obtained by Radiolysis-CVD of Germane\Ethyne Systems
487
Characterization and properties of an advanced composite substrate for YBCO-coated conductors Original Research Article
488
Characterization and properties of biodegradable poly(hydroxyalkanoates) and 4,4-dihydroxydiphenylpropane blends: Intermolecular hydrogen bonds, miscibility and crystallization
489
Characterization and properties of blended cement matrices containing activated bamboo leaf wastes
490
Characterization and properties of carboxymethyl cellulose hydrogels crosslinked by polyethylene glycol
491
Characterization and properties of catalase immobilized onto controlled pore glass and its application in batch and plug-flow type reactors
492
Characterization and properties of ferromagnetic shape memory alloys
493
Characterization and properties of hybrid composites prepared from poly(vinylidene fluoride–tetrafluoroethylene) and SiO2
494
Characterization and properties of lanthanide based titanium tantalate and aluminate electronic ceramic mixtures
495
Characterization and properties of lignocellulosic fibers with thin-film deposited cationic precursor
496
Characterization and properties of matrices with generalized symmetry or skew symmetry
497
Characterization and properties of matrices with k-involutory symmetries Original Research Article
498
Characterization and properties of microarc oxidized coatings containing Si, Ca and Na on titanium
499
Characterization and properties of microwave plasma-treated SrTiO3
500
Characterization and properties of mixed bentonite-vanadium(V) oxide xerogels
501
Characterization and properties of oxide scales on hot-rolled strips
502
Characterization and properties of PAN-based high modulus carbon fibers
503
Characterization and properties of petroleum fractions: Its applications in petroleum production
504
Characterization and properties of polydiphenylamine electrochemically modified by iodide species
505
Characterization and properties of quaternary Mo–Si–C–N coatings synthesized by magnetron sputtering technique
506
Characterization and properties of sepiolite/polyurethane nanocomposites
507
Characterization and properties of the charge transfer complex of carbazole derivatives
508
Characterization and properties of the copolymer of dipyrido-[3,2-a; 2′,3′-c]-thien-[3,4-c]azine with 3-dodecylthiophene
509
Characterization and properties of the MgF2/ZrO2 composite coatings on magnesium prepared by micro-arc oxidation
510
Characterization and properties of Ti-containing amorphous carbon nanocomposite coatings prepared by middle frequency magnetron sputtering
511
Characterization and properties of treated smectites
512
Characterization and properties of tungsten carbide coatings fabricated by SPS technique
513
Characterization and properties of ZnO based nanopowders prepared by solar physical vapor deposition (SPVD)
514
Characterization and properties of ZnO1−xSx alloy films fabricated by radio-frequency magnetron sputtering
515
Characterization and properties of Zn–O–Se ternary system thin films deposited by radio-frequency (rf)-magnetron sputtering
516
Characterization and properties Ti–Al–Si–N nanocomposite coatings prepared by middle frequency magnetron sputtering
517
Characterization and property evaluation of (Th–3.75U)O2+x fuel pellets fabricated by impregnated agglomerate pelletization (IAP) process
518
Characterization and property evaluation of U–15 wt%Pu alloy for fast reactor
519
Characterization and property of DNA incorporated bilayer lipid membranes Original Research Article
520
Characterization and Prospective Applications of the Exopolysaccharides Produced by Rhodosporidium babjevae
521
Characterization and protein-adsorption behavior of deposited organic thin film onto titanium by plasma polymerization with hexamethyldisiloxane
522
Characterization and protonation behavior of bipyridine thiol self-assembled monolayer on Au(1 1 1) studied using X-ray photoelectron spectroscopy and scanning tunneling microscopy
523
Characterization and pulp refining activity of a Paenibacillus campinasensis cellulase expressed in Escherichia coli
524
Characterization and purification of bacteriophages using chromatofocusing
525
Characterization and Purification of Protease Extracted from Two Maturity Stages of ‘Noni’ (Morinda citrifolia L.) fruit
526
Characterization and purification of truncated human Rho-kinase II expressed in Sf-21 cells
527
Characterization and pyrolysis behaviour of different paper mill waste materials
528
Characterization and pyrolysis behaviour of different paper mill waste materials
529
Characterization and qualification of advanced insulators for fusion magnets
530
Characterization and quality control of avalanche photodiode arrays for the Clear-PEM detector modules
531
Characterization and quality control of avalanche photodiode arrays for the Clear-PEM detector modules
532
Characterization and quality control of CMS silicon microstrip sensors
533
Characterization and quality control of CMS silicon microstrip sensors
534
Characterization and quality control of recombinant adenovirus vectors for gene therapy
535
Characterization and quantification of 4-methylsterols and 4,4-dimethylsterols from Iberian pig subcutaneous fat by gas chromatography–mass spectrometry and gas chromatography–flame ionization detector and their use to authenticate the fattening systems
536
Characterization and quantification of Bcl-2 antisense G3139 and metabolites in plasma and urine by ion-pair reversed phase HPLC coupled with electrospray ion-trap mass spectrometry
537
Characterization and quantification of biomarkers from biomass burning at a recent wildfire site in Northern Alberta, Canada
538
Characterization and Quantification of Dragon Fruit (Hylocereus polyrhizus) Betacyanin Pigments Extracted by Two Procedures
539
Characterization and quantification of eight water-soluble constituents in tubers of Pinellia ternata and in tea granules from the Chinese multiherb remedy Xiaochaihu-tang
540
Characterization and quantification of groundwater sulfate sources at a mining site in an arid climate: The Monument Valley site in Arizona, USA
541
Characterization and Quantification of Heavy Metals in Oued Sebou Sediments
542
Characterization and quantification of karlotoxins by liquid chromatography–mass spectrometry
543
Characterization and quantification of odorous and non-odorous volatile organic compounds near a commercial dairy in California
544
Characterization and quantification of racemic and meso-ethylenediamine-N,N′-bis(2-hydroxy-5-sulfophenylacetic) acid/iron (III) by ion-pair ultra-high performance liquid chromatography coupled with diode array detector and electrospray tandem mass spectro
545
Characterization and quantification of saponins and flavonoids in sprouts, seed coats and cotyledons of germinated black beans
546
Characterization and quantification of self-healing behaviors of microcracks due to further hydration in cement paste
547
Characterization and quantification of solid waste in rural regions
548
Characterization and quantification of the cross-linking of linear low density polyethylene with silane grafting by Fourier transform infrared (FTIR) spectroscopy
549
Characterization and quantification of the hydrocarbons fraction of the subcutaneous fresh fat of Iberian pig by off-line combination of high performance liquid chromatography and gas chromatography
550
Characterization and quantification of the release of airborne dust after mechanical impact on powders and solids
551
Characterization and quantification of the return map of RR intervals by Pearson coefficient in patients with acute myocardial infarction
552
Characterization and Quantification of Triple Helix Formation in Chromosomal DNA
553
Characterization and quantification of uncertainty in solid oxide fuel cell hybrid power plants
554
Characterization and quantification of unintentional POP emissions from primary and secondary copper metallurgical processes in China
555
Characterization and Quantitation of Extracellular Collagen Matrix in Myocardium of Pigs with Spontaneously Occurring Hypertrophic Cardiomyopathy
556
Characterization and Quantitative Analysis with GC/TOFMS Comparing Enhanced Separation with Tandem-Column StopFlow GC and Spectral Deconvolution of Overlapping Peaks
557
Characterization and quenching of friction-induced limit cycles of electro-hydraulic servovalve control systems with transport delay
558
Characterization and radionuclide retention properties of heat-treated concrete
559
Characterization and re-activation of oxygen sensors for use in liquid lead–bismuth
560
Characterization and reactivity assessment of organic substrates for sulphate-reducing bacteria in acid mine drainage treatment
561
Characterization and reactivity in CO oxidation of gold nanoparticles supported on TiO2 prepared by deposition-precipitation with NaOH and urea
562
Characterization and reactivity of Ce-promoted PtBa lean NOx trap catalysts
563
Characterization and reactivity of chromia nanoparticles prepared by urea forced hydrolysis
564
Characterization and reactivity of Fe-[Al,B]MFI catalysts for benzene hydroxylation with N2O Original Research Article
565
Characterization and reactivity of Ga+ and GaO+ cations in zeolite ZSM-5
566
Characterization and reactivity of molybdenum oxide catalysts supported on anatase and rutile polymorphs of titania Original Research Article
567
Characterization and reactivity of molybdenum oxide catalysts supported on zirconia Original Research Article
568
Characterization and reactivity of nanoscale La(Co,Cu)O3 perovskite catalyst precursors for CO hydrogenation
569
Characterization and reactivity of natural manganese ore catalysts in the selective catalytic oxidation of ammonia to nitrogen
570
Characterization and reactivity of organically bound sulfur and nitrogen fossil fuels
571
Characterization and reactivity of Pd–Pt bimetallic supported catalysts obtained by laser vaporization of bulk alloy
572
Characterization and reactivity of Re(x)/γ-Al2O3 catalysts in hydrodesulfurization and hydrodenitrogenation of gas oil: effect of Re loading Original Research Article
573
Characterization and reactivity of Ru/single oxides catalysts for the syngas reaction Original Research Article
574
Characterization and reactivity of silicatic consolidants
575
Characterization and reactivity of sol–gel synthesized TiO2–Al2O3 supported vanadium oxide catalysts
576
Characterization and reactivity of V2O5-WO3 supported on TiO2-SO42− catalyst for the SCR reaction
577
Characterization and reactivity of vanadia–molybdena catalysts supported on γ-Al2O3 Original Research Article
578
Characterization and reactivity of vanadium oxide catalysts supported on niobia Original Research Article
579
Characterization and reactivity with NO/O2 of the soot formed in the pyrolysis of acetylene–ethanol mixtures
580
Characterization and reactivity with NO/O2 of the soot formed in the pyrolysis of acetylene–ethanol mixtures
581
Characterization and recognition of generalized clique-Helly graphs Original Research Article
582
Characterization and recognition of Helly circular-arc clique-perfect graphs
583
Characterization and recognition of image-sparse graphs partitionable into image independent sets and image cliques Original Research Article
584
Characterization and reconstitution of a new fungal type III polyketide synthase from Aspergillus oryzae
585
Characterization and recovery of mercury from spent fluorescent lamps
586
Characterization and reduction of dynamic models of vibrating systems with high modal density
587
Characterization and reduction of interferences in flow-injection analysis for the in situ determination of nitrate and nitrite in sea water
588
Characterization and reduction of membrane fouling during nanofiltration of semiconductor indium phosphide (InP) wastewater
589
Characterization and reduction of noise in Mo/Au transition edge sensors
590
Characterization and reduction of noise in Mo/Au transition edge sensors
591
Characterization and Regulation of Prostaglandin E2 Receptors on Normal and Malignant Murine B Lymphocytes
592
Characterization and Related Representational Issues in the African-American Novel
593
Characterization and relative photonic efficiencies of a new Fe-ACF/TiO2 composite photocatalysts designed for organic dye decomposition
594
Characterization and relative photonic efficiencies of a new nanocarbon/TiO2 composite photocatalyst designed for organic dye decomposition and bactericidal activity
595
Characterization and relative sonocatalytic efficiencies of a new MWCNT and CdS modified TiO2 catalysts and their application in the sonocatalytic degradation of rhodamine B
596
Characterization and relative sonocatalytic efficiencies of a new MWCNT and CdS modified TiO2 catalysts and their application in the sonocatalytic degradation of rhodamine B
597
Characterization and release behaviors of porous PCL/Eudragit RS microcapsules containing tulobuterol
598
Characterization and release of triptolide-loaded poly (d,l-lactic acid) nanoparticles
599
Characterization and reliability of dual high-k gate dielectric stack (poly-Si-HfO/sub 2/-SiO/sub 2/) prepared by in situ RTCVD process for system-on-chip applications
600
Characterization and removal of aggregates formed by nonspecific interaction of IgM monoclonal antibodies with chromatin catabolites during cell culture production
601
Characterization and removal of co-deposition on the first mirror of HL-2A by excimer laser cleaning
602
Characterization and removal of DNAPL from sand and clay layered media
603
Characterization and removal of natural organic matter by an integrated membrane system Original Research Article
604
Characterization and renal protective effect of a polysaccharide from Astragalus membranaceus
605
Characterization and renal protective effect of a polysaccharide from Astragalus membranaceus
606
Characterization and repair measures of the medieval building materials of a Hispanic–Islamic construction
607
Characterization and representation problems for intersection betweennesses Original Research Article
608
Characterization and residual stress analysis of wear resistant Mo thermal spray-coated steel gear wheels
609
Characterization and residual stresses of WC–Co thermally sprayed coatings
610
Characterization and resistance mechanisms of cisplatinresistant human hepatocellular carcinoma cell line
611
Characterization and retention of NF membranes using PEG, HS and polyelectrolytes Original Research Article
612
Characterization and retention of UF membranes using PEG, HS and polyelectrolytes Original Research Article
613
Characterization and retroviral transduction of an early human lymphomyeloid precursor assayed in nonswitched long-term culture on murine stroma
614
Characterization and re-use potential of by-products generated from the Ohio State Carbonation and Ash Reactivation (OSCAR) process
615
Characterization and rheological study of the galactomannan extracted from seeds of Cassia grandis
616
Characterization and Risk Assessment Studies of Bed Sediments of River Adyar-An Application of Speciation Study
617
Characterization and role of poly(ADP-ribosyl)ation in the Mediterranean species Cistus incanus L. under different temperature conditions
618
Characterization and safety evaluation of enterococci isolated from Spanish goatsʹ milk cheeses
619
Characterization and safety evaluation of the traditional Greek fruit distillate “Mouro” by flavor compounds and mineral analysis
620
Characterization and safety of uniform particle size NovaSil clay as a potential aflatoxin enterosorbent
621
Characterization and saturation determination of reservoir metagraywacke from The Geysers corehole SB-15-D (USA), using Nuclear Magnetic Resonance Spectrometry and X-ray Computed Tomography
622
Characterization and scintillation studies of a solid-state photomultiplier
623
Characterization and scintillation studies of a solid-state photomultiplier
624
Characterization and screening of antimicrobial activity of Micromonospora strains from Thai soils
625
Characterization and seasonal variations of surface active substances in the natural sea surface micro-layers of the coastal Middle Adriatic stations
626
Characterization and selection of CZT detector modules for HEX experiment onboard Chandrayaan-1
627
Characterization and selection of CZT detector modules for HEX experiment onboard Chandrayaan-1
628
Characterization and selection of Lactobacillus sakei strains isolated from traditional dry sausage for their potential use as starter cultures Original Research Article
629
Characterization and selection of optimal parameters to achieve the best tribological performance of the electrodeposited Cr nanocomposite coating
630
Characterization and selective oxidation catalysis of modified Pt particles on SbOx Original Research Article
631
Characterization and selectivity optimization on diol, amino, and cyano normal phase columns based on linear solvation energy relationships Original Research Article
632
Characterization and self-assembly of poly[sodium N-(11-acrylamidoundecanoyl)-l-alaninate] in water
633
Characterization and separation of corn stover bio-oil by fractional distillation
634
Characterization and serotype distribution of Aggregatibacter actinomycetemcomitans isolated from a population of periodontitis patients in Spain
635
Characterization and side effect analysis of a newly designed nanoemulsion targeting human serum albumin for drug delivery
636
Characterization and similarity analysis of DNA sequences based on mutually direct-complementary triplets
637
Characterization and similarity analysis of DNA sequences grounded on a 2-D graphical representation
638
Characterization and simulation of a-Si:H/μc-Si:H tandem solar cells
639
Characterization and simulation of different SiPM structures produced at FBK
640
Characterization and simulation of different SiPM structures produced at FBK
641
Characterization and simulation of gunfire with wavelets
642
Characterization and simulation of gunfire with wavelets
643
Characterization and simulation of microstructure and properties of EPS lightweight concrete
644
Characterization and simulation of microstructure and thermal properties of foamed concrete
645
Characterization and simulation of organic adsorbates on the si(100)(2 × 1)-surface using photoelectron spectroscopy and quantum mechanical calculations
646
Characterization and simulation of organic adsorbates on the si(100)(2 × 1)-surface using photoelectron spectroscopy and quantum mechanical calculations
647
Characterization and simulation of resistive-MPGDs with resistive strip and layer topologies
648
Characterization and simulation of resistive-MPGDs with resistive strip and layer topologies
649
Characterization and simulation of the creep behavior of sandwich structures for cooling thermally highly loaded steam turbine components
650
Characterization and simulation of the response of Multi-Pixel Photon Counters to low light levels
651
Characterization and simulation of the response of Multi-Pixel Photon Counters to low light levels
652
Characterization and simulation of water-degraded archaeological textiles: a review
653
Characterization and simultaneous determination of immunosuppressive decalins in red yeast rice by ultra-high-performance liquid chromatography hyphenated with mass spectrometry
654
Characterization and sinterability of chemically precipitated phosphate-bearing magnesia grains
655
Characterization and sinterability of nanophase titania particles processed in flame reactors
656
Characterization and sintering of MoO3 prepared by thermal decomposition of hexaammonium heptamolybdate tetrahydrate
657
Characterization and sintering of nanocrystalline CeO2 powders synthesized by a mimic alkoxide method Original Research Article
658
Characterization and Site-Directed Mutagenesis of Aspen Lignin-SpecificO-Methyltransferase Expressed inEscherichia coli
659
Characterization and sliding behavior of HFCVD diamond coatings on WC–Co
660
Characterization and SNP variation analysis of a HSP70 gene from miiuy croaker and its expression as related to bacterial challenge and heat shock
661
Characterization and Sodium Sorption Capacity of Biochar and Activated Carbon Prepared from Rice Husk
662
Characterization and solderability of cold sprayed Sn–Cu coatings on Al and Cu substrates
663
Characterization and solid particle erosion behavior of plasma sprayed alumina and calcia-stabilized zirconia coatings on Al-6061 substrate
664
Characterization and solubility measurement and prediction of selected arylamines in hexane, methanol and benzene
665
Characterization and solvent engineering of wheat β-amylase for enhancing its activity and stability
666
Characterization and source apportionment of aerosol light extinction in Chengdu, southwest China
667
Characterization and source apportionment of ambient air particulate matter (PM2.5) in Karachi Original Research Article
668
Characterization and source apportionment of particulate matter in the Czech Republic
669
Characterization and source identification of a fine particle episode in Finland
670
Characterization and source identification of hydrocarbons in water samples using multiple analytical techniques
671
Characterization and source identification of organic matter in view of land uses and heavy rainfall in the Lake Shihwa, Korea
672
Characterization and source identification of polycyclic aromatic hydrocarbons (PAHs) in river bank soils Original Research Article
673
Characterization and source identification of polycyclic aromatic hydrocarbons (PAHs) in the urban environment of Delhi Original Research Article
674
Characterization and source identification of trace elements in PM2.5 from Mira Loma, Southern California
675
Characterization and source of oil contamination on the beaches and seabird corpses, Sable Island, Nova Scotia, 1996–2005
676
Characterization and source presumption of wintertime submicron organic aerosols at Saitama, Japan, using the Aerodyne aerosol mass spectrometer
677
Characterization and source term assessments of radioactive particles from Marshall Islands using non-destructive analytical techniques
678
Characterization and source term assessments of radioactive particles from Marshall Islands using non-destructive analytical techniques
679
Characterization and sources assignation of PM2.5 organic aerosol in a rural area of Spain
680
Characterization and spatial distribution of bacterial communities within passively aerated cattle manure composting piles
681
Characterization and spatial distribution of heavy metals in sediment from Cedar and Ortega rivers subbasin
682
Characterization and spatial modeling of urban sprawl in the Wuhan Metropolitan Area, China
683
Characterization and speciation of depleted uranium in individual soil particles using microanalytical methods
684
Characterization and speciation of mercury-bearing mine wastes using X-ray absorption spectroscopy
685
Characterization and species differences in gastric ghrelin cells from mice, rats and hamsters
686
Characterization and spectral properties of the new organic metal (BEDT-TTF)6(Mo8O26)(DMF)3
687
Characterization and spectral studies of Co3+-doped Cd0.4Mn0.6Fe2O4 ferrites
688
Characterization and spectroscopic analysis of phenol–ethanol hydrogen bonded clusters
689
Characterization and stability of light statistics distributions
690
Characterization and Stability of Pigments Extracted from Terminalia Catappa Leaves
691
Characterization and stability of proteases from Penicillium sp. produced by solid-state fermentation
692
Characterization and Stability of specific IgE to White Egg’s, Gliadin’s and Peanut’s Proteins among Children
693
Characterization and Stability of the AntimonyQuercetin Complex
694
Characterization and stability of thin oxide films on plutonium surfaces
695
Characterization and stability studies of titanium beryllides
696
Characterization and stability studies on surfactant, detergent and oxidant stable α-amylase from marine haloalkaliphilic Saccharopolyspora sp. A9
697
Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite
698
Characterization and stability tests of an all solid state electrochromic cell using polyaniline
699
Characterization and Structural Analysis of the Human Papilloma Virus L1 Protein in Iran
700
Characterization and structural analysis of the potent antiparasitic and antiviral agent tizoxanide
701
Characterization and structural analysis of zinc-substituted hydroxyapatites
702
Characterization and structural integrity tests of ex-service steam generator tubes at Ontario Power Generation Original Research Article
703
Characterization and structural studies of lithium doped lead zinc phosphate glass system
704
Characterization and structural study of lanthanum citrate trihydrate [La(C6H5O7)(H2O)2]·H2O
705
Characterization and structure basis of Pseudomonas alcaligenes lipaseʹs enantiopreference towards d,l-menthyl propionate
706
Characterization and structure study of the anodic oxide film on Zircaloy-4 synthesized using NaOH electrolytes at room temperature
707
Characterization and structures of the 2,2,7-trimethyl-3,5-octanedionate chelates of cerium(IV) and terbium(III)
708
Characterization and study of photonic crystal fibres with bends
709
Characterization and study of piperazinium salts, degradation products of nitrogen mustards by nuclear magnetic resonance spectroscopy and liquid chromatography–mass spectrometry
710
Characterization and study on performance of the Ru–La–B/ZrO2 amorphous alloy catalysts for benzene selective hydrogenation to cyclohexene under pilot conditions
711
Characterization and study on performance of the Ru–La–B/ZrO2 amorphous alloy catalysts for benzene selective hydrogenation to cyclohexene under pilot conditions
712
Characterization and Subcellular Distribution of G-Proteins in Highly Purified Skeletal Muscle Fractions from Rabbit and Frog
713
Characterization and Subcellular Localization of KCNQ1 with a Heterozygous Mutation in the C Terminus
714
Characterization and subtyping of Cronobacter spp. from imported powdered infant formulae in Argentina
715
Characterization and subunit composition of collagen from the body wall of sea cucumber Stichopus japonicus
716
Characterization and surface reactivity analyses of ceria nanorod catalyst for methanol interaction
717
Characterization and surface reactivity of natural and synthetic magnetites
718
Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic
719
Characterization and surgical ablation of atrial flutter after the classic fontan repair
720
Characterization and swelling–deswelling properties of wheat straw cellulose based semi-IPNs hydrogel
721
Characterization and synthesis of hardystonite (HT) as a novel nanobioceramic powder
722
Characterization and synthesis of KTa0.1Nb0.9O3 particles via high temperature mixing method under hydrothermal conditions
723
Characterization and synthesis of O- and N-tosylated N,N-bis(2-aminophenyl)isophthalamide based ligands
724
Characterization and synthesis of pure ZrO2 nanopowders via sonochemical method
725
characterization and synthesis of some new schiff bases and their potential applications
726
Characterization and synthesis of Y0.9Ca0.1Ba1.8Sr0.2Cu3O7−δ via combining sol–gel and solid-state route
727
Characterization and synthetic application of a novel β1,3-galactosyltransferase from Escherichia coli O55:H7 Original Research Article
728
Characterization and TCAD modelling of termination structures for silicon radiation detectors
729
Characterization and TCAD modelling of termination structures for silicon radiation detectors
730
Characterization and technological properties of Staphylococcus xylosus strains isolated from a Tunisian traditional salted meat
731
Characterization and temperature-dependent conductivity of polyaniline nanocomposites encapsulating gold nanoparticles on the surface of carboxymethyl cellulose
732
Characterization and testing of silica-supported cobalt–palladium catalysts for conversion of syngas to oxygenates
733
Characterization and testing of sol–gel catalysts prepared as thin layers in a plate reactor
734
Characterization and the hydrogen storage capacity of titania-coated electrospun boron nitride nanofibers
735
Characterization and the photocatalytic activity of TiO2 immobilized hydrophobic montmorillonite photocatalysts: Degradation of decabromodiphenyl ether (BDE 209)
736
Characterization and theoretical analysis of protein fouling of cellulose acetate membrane during constant flux dead-end microfiltration
737
Characterization and thermal activation of adducts of Group 4 tetrahalides with 1,2-dialkoxyalkanes
738
Characterization and thermal analysis of raw clay for ceramic product design
739
Characterization and thermal behavior of calcium deficient hydroxyapatite whiskers with various Ca/P ratios
740
Characterization and thermal behavior of HGdP2O7·3H2O
741
Characterization and thermal behavior of PrMO3 (M = Co or Ni) ceramic materials obtained from gelatin
742
Characterization and Thermal Decomposition of Indolylidene Aniline Azo-Dyes Derivatives
743
Characterization and thermal degradation mechanism of isotactic polypropylene/carbon black nanocomposites
744
Characterization and thermal kinetic studies on charge-transfer complexes of 4,4′-bipyridine with benzoquinone derivatives
745
Characterization and thermal kinetic studies on charge-transfer complexes of 4,4′-bipyridine with benzoquinone derivatives
746
Characterization and thermal lability of carotenoids and vitamin C of tamarillo fruit (Solanum betaceum Cav.)
747
Characterization and thermal stability of cobalt-modified 1-D nanostructured trititanates
748
Characterization and thermal stability properties of intercalated Na-magadiite with cetyltrimethylammonium (C16TMA) surfactants Original Research Article
749
Characterization and thermo physical property investigations on Ba1−xSrxMoO4 (x = 0, 0.18, 0.38, 0.60, 0.81, 1) solid-solutions
750
Characterization and thiophene hydrodesulfurization activity of amorphous-silica–alumina-supported NiW catalysts
751
Characterization and three-dimensional reconstruction of synthetic bone model foams
752
Characterization and tissue expression of apoptosis-related ALG-2 interacting protein Alix/AIP1 from the black tiger shrimp Penaeus monodon
753
Characterization and transcriptional analysis of the promoter region of the Duffy blood group, chemokine receptor (DARC) gene in cattle
754
Characterization and transcriptional analysis of the promoter region of the Duffy blood group, chemokine receptor (DARC) gene in cattle
755
Characterization and transesterification of Iranian bitter almond oil for biodiesel production
756
Characterization and Transferring of Human Rotavirus Double-Layered Particles in MA104 Cells
757
Characterization and Transformation of Silicon Dioxide Nanoparticles in Aqueous Suspensions: Influence of pH
758
Characterization and Transport Properties of Indium Sesquitelluride Monocrystals
759
Characterization and transport properties of intercalated polypyrrole–vanadium pentoxide xerogel nanocomposite
760
Characterization and transport properties of V2O5–Fe2O3–TeO2 glasses
761
Characterization and treatability of aerobic bacterial thermophilically treated wastewater by a conventional activated sludge and granular activated carbon
762
CHARACTERIZATION AND TREATMENT OF EFFLUENT FROM OPIUM ALKALOID PROCESSING WASTEWATER
763
CHARACTERIZATION AND TREATMENT OF EFFLUENT FROM OPIUM ALKALOID PROCESSING WASTEWATER
764
Characterization and treatment of wastewater produced during the hydro-metallurgical extraction of germanium from fly ash Original Research Article
765
Characterization and tribological behavior of FeS/ferroalloy composite coating under dry condition
766
Characterization and tribological evaluation of MW-PACVD diamond coatings deposited on pure titanium
767
Characterization and tribological evaluation of MW-PACVD diamond coatings deposited on pure titanium
768
Characterization and tribological investigation of Al2O3 and modified Al2O3 sol-gel films
769
Characterization and tribological investigation of self-assembled lanthanum-based thin films on glass substrates
770
Characterization and tribological investigation of self-assembled MPTS-MPTES/RE composite films
771
Characterization and tribological investigation of SiO2 and La2O3 sol–gel films
772
Characterization and tribological investigation of sol-gel Al2O3 and doped Al2O3 films
773
Characterization and tribological investigation of sol–gel ceramic films on Ti–6Al–4V
774
Characterization and tribological performance of oxide layers on a gamma based titanium aluminide
775
Characterization and tribological properties of composite 3Cr13/FeS layer
776
Characterization and tribological properties of plasma sprayed FeS solid lubrication coatings
777
Characterization and tunneling conductance spectra of N,N′-bis (9H-fluoren-9-ylidene)benzene-1,4-diamine thin films on graphite
778
Characterization and use of a Raman liquid-core waveguide sensor using preconcentration principles
779
Characterization and use of a vegetable waste vermicompost as an alternative component in substrates for horticultural seedbeds
780
Characterization and use of activated carbons prepared from bagasses for liquid-phase adsorption
781
Characterization and use of anionic membranes for alkaline fuel cells
782
Characterization and use of crystalline bacterial cell surface layers
783
Characterization and use of functionalized carbon nanotubes for the adsorption of heavy metal anions
784
Characterization and use of functionalized carbon nanotubes for the adsorption of heavy metal anions
785
Characterization and use of hydrophilic interaction liquid chromatography type stationary phases in supercritical fluid chromatography
786
Characterization and utilization of acid-modified cross-linked Tapioca starch in pharmaceutical tablets
787
Characterization and Utilization of Calcium Oxide (CaO) Thermally Decomposed from Fish Bones as a Catalyst in the Production of Biodiesel from Waste Cooking Oil
788
Characterization and utilization of fly ash of heavy fuel oil generated in power stations
789
Characterization and utilization of mesoporous fertilizer plant waste carbon for adsorptive removal of dyes from aqueous solution
790
Characterization and utilization of nodular sepiolite (meerschaum) from Eskisehir (Turkey)
791
Characterization and utilization of the context-dependent physical properties of nanoparticles for nanostructures investigated by scanning tunnelling microscopy
792
Characterization and utilization of two novel anti-erbB-2 monoclonal antibodies in detection of soluble ErbB-2 for breast cancer prognosis
793
Characterization and Utilization of Zeolite for NPK Slow Release Fertilizer
794
Characterization and validation of ion mobility spectrometry in methamphetamine clandestine laboratory remediation
795
Characterization and validation of the gamma-scintigraphic method for determining liquid holdup in foam
796
Characterization and VH Sequences of Human Monoclonal Anti-F(ab′)2 Autoantibodies from Normals and Sjögrenʹs Syndrome Patients
797
Characterization and viscosity parameters of seed oils from wild plants
798
Characterization and visible light photocatalytic mechanism of size-controlled BiFeO3 nanoparticles
799
Characterization and visible light photocatalytic properties of nanocrystalline TiO2 synthesized by reactive plasma processing
800
Characterization and visualization of the lattice misfit associated with dislocation cores
801
Characterization and visualization of the lattice misfit associated with dislocation cores Original Research Article
802
Characterization and Wash Performance Analysis of Microbial Extracellular Enzymes from East Calcutta Wetland in India
803
Characterization and wear behavior of pulsed electrode surfacing coatings
804
Characterization and wear resistance of laser surface cladding AZ91D alloy with Al + Al2O3
805
Characterization and X-ray peak broadening analysis in PZT nanoparticles prepared by modified sol–gel method
806
Characterization and expression of Arabidopsis UDP-sugar pyrophosphorylase
807
Characterization andmetals fractionation of street dust samples from Tehran, Iran
808
Characterization Antimicrobes of Pliek U, A Traditional Spice of Aceh
809
Characterization at a local scale of a laser-shock peened aluminum alloy surface
810
Characterization at the Single-Cell Level of Naive and Primed CD8 T Cell Cytokine Responses
811
Characterization based on convex conditional mean function
812
Characterization by 29Si MAS NMR of a porous ceria-silica catalyst
813
Characterization by 29Si MAS NMR of a porous ceria-silica catalyst
814
Characterization by acoustic emission pattern recognition of microstructure evolution in a fused-cast refractory during high temperature cycling
815
Characterization by acoustic microscopy of adhesion in poly ethylene terephtalate/films coated by aluminium
816
Characterization by ammonia adsorption microcalorimetry of substantially amorphous or partially crystalline ZSM-5 materials and correlation with catalytic activity Original Research Article
817
Characterization by atomic force microscopy of the SOI layer topography in low-dose SIMOX materials
818
Characterization by atomic force microscopy of the SOI layer topography in low-dose SIMOX materials
819
Characterization by bone histology of hypophosphatemic vs vitamin-D deficiency bone disease
820
Characterization by CEMS, XRD and XPS of oxidized layers formed on the surface of carbonitrided low-carbon steel
821
Characterization by chromosome painting of balanced and unbalanced x chromosome translocations in myelodysplastic syndromes
822
Characterization by conventional techniques and PCR of Rhizoctonia solani isolates causing banded leaf sheath blight in maize
823
Characterization by culture-dependent and culture-independent methods of the bacterial population of suckling-lamb packaged in different atmospheres Original Research Article
824
Characterization by different analytical techniques of SiO2 and silane thin films deposited on rough hot-dip galvanized steel surfaces
825
Characterization by electrical and electromagnetic geophysical methods of the shallow hydrogeological system at Hebron (West Bank, Palestine) in a semi-arid zone
826
Characterization by electrochemical impedance spectroscopy of passive layers formed on lead-tin alloys, in tetraborate and sulfuric acid solutions
827
Characterization by electron spin resonance of defects in a-C:H thin films. Correlation between structural evolutions and optical properties
828
Characterization by FISH of a t(5;13) in a patient with bilateral retinoblastoma
829
Characterization by Fourier transform infrared spectroscopy of hydroxyapatite co-doped with zinc and fluoride
830
Characterization by invariance under length-biasing and random scaling
831
Characterization by IR spectroscopy of an hybrid sol–gel material used for photonic devices fabrication
832
Characterization by liquid chromatography combined with mass spectrometry of monoclonal anti-IGF-1 receptor antibodies produced in CHO and NS0 cells
833
Characterization by mass spectrometry and IRMPD spectroscopy of the sulfoxide group in oxidized methionine and related compounds
834
Characterization by polyphasic approach of some indigenous halophilic archaea of Djelfa’s rock salt “Hadjr el Meelh”, Algeria
835
Characterization by Raman spectroscopy of solid solutions in the yttria-rich side of the zirconia–yttria system
836
Characterization by resonance Raman spectroscopy of sol–gel TiO2 films sensitized by the Ru(PPh3)2(dcbipy)Cl2 complex for solar cells application
837
Characterization by SFM of Co/Cu multilayers grown on an In buffer
838
Characterization by solid-state CPMAS 13C NMR spectroscopy of decomposing plant residues in conventional and no-tillage systems in Central Brazil
839
Characterization by solid-state NMR and selective dissolution techniques of anhydrous and hydrated CEM V cement pastes
840
Characterization by TEM and ToF-SIMS of the oxide layer formed during anaphoretic paint electrodeposition on Al-alloys
841
Characterization by the solvation parameter model of the retention properties of commercial ionic liquid columns for gas chromatography
842
Characterization by Total Reflection X-ray Fluorescence Spectrometry of filtered water into the cave under the Sun Pyramid in Teotihuacan City
843
Characterization by Total Reflection X-ray Fluorescence Spectrometry of filtered water into the cave under the Sun Pyramid in Teotihuacan City
844
Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites Original Research Article
845
Characterization by X-ray diffraction and electron microscopy of GaInAs and GaAsN single layers and quantum wells grown on GaAs
846
Characterization by X-ray tomography of granulated alumina powder during in situ die compaction
847
Characterization by XRD and electron paramagnetic resonance (EPR) of waste materials from “Cerro Matoso” Mine (Colombia)
848
Characterization Effect of Copper Oxide and Cobalt Oxide Nanocomposite on Poly(Vinyl Chloride) Doping Process for Solar Energy Applications
849
Characterization for drought resistance at early stages of wheat genotypes based on survival, coleoptile length, and seedling vigor
850
Characterization for enterotoxin production, virulence factors, and antibiotic susceptibility of Staphylococcus aureus isolates from various foods in Portugal Original Research Article
851
CHARACTERIZATION FOR GTAW AISI 316 TO AISI 316 SA 516 GRADE 70 STEELS WITH WELDED PREWELDED ANNEALING CONDITIONS
852
Characterization for N- and P-type 3C-SiC on Si (1 0 0) substrate with thermal anneal and pulsed excimer laser anneal
853
Characterization for particles in the indoor and outdoor ambient air near a traffic road
854
Characterization for the interaction of nickel(II) and copper(II) from aqueous solutions with natural silicate minerals Original Research Article
855
Characterization for the Kuratowski Limits of a Sequence of Sobolev Spaces
856
Characterization in Mice of the Immunological Properties of Five Allergenic Acid Anhydrides
857
Characterization in relation to development of an ecdysteroid agonist-responsive cytochrome P450, CYP18A1, in Lepidoptera
858
Characterization in vivo of Muscle Fiber Types by Magnetic Resonance Imaging
859
Characterization investigations of glass-ceramics developed from Seyitِmer thermal power plant fly ash
860
Characterization investigations of ZrB2/ZrC ceramic powders synthesized by mechanical alloying of elemental Zr, B and C blends
861
Characterization method of average gas–solid drag for regular and irregular particle groups
862
Characterization method of photopolymerization kinetics of two dental composite resins using two types of light sources
863
Characterization Methodology of a Tribological Couple: Metal Matrix Composite/Brake Pads
864
Characterization methods and modelling of ultracapacitors for use as peak power sources
865
Characterization methods of bone–implant-interfaces of bioresorbable and titanium implants by fracture mechanical means
866
Characterization methods of carbon nanotubes: a review
867
Characterization modelling and validation of a two-point loaded iron ore pellet
868
Characterization Molecular Biochemical Method for Diagnostic of Tuberculosis in the Pleural Samples
869
Characterization of 111In^3+ Complexes of DTPA Amide Derivatives: Biodistribution and Clearance Studied by gamma Imaging
870
Characterization of lt;i gt;rrs lt;/i gt; and lt;i gt;rpsL lt;/i gt; Mutations in Aminoglycoside-Resistant lt;i gt;Mycobacterium tuberculosis lt;/i gt; Strains Isolated from Clinical Specimens in the West of Iran
871
Characterization of Recombination Event Excluding the Harvey-ras-1 (H-ras-1) Locus in Romano-Ward Long QT Syndrome Family Linked to Chromosome 11p15 and Isolation of Polymorphic Repeat Telomeric to H-ras-1
872
Characterization of $L$-fuzzifying matroids by $L$-fuzzifying closure operators
873
Characterization of ( )-double derivations on rings and algebras
874
Characterization of (1 − x) La0.83Sr0.17Ga0.83Mg0.17O2.83 − xLa0.8Sr0.2MnO3 (0 ≤ x ≤ 1) composite cathodes
875
Characterization of (1 1 1) surface tailored Pt nanoparticles by electrochemistry and X-ray powder diffraction
876
Characterization of (16R) and (16S)-hydroxyroquefortine C; diastereomeric metabolites from Penicillium crustosum DAOM 215343
877
Characterization of (1-x)[Bi12In0.5O18.75+γ-Bi2O3]:(x)PbTiO3 ceramics
878
Characterization of (Ba, Sr)RuO3 films deposited by metal organic chemical vapor deposition
879
Characterization of (Ba0.65Sr0.35)(Ti0.65Zr0.35)O3 thin film
880
Characterization of (E,E)-farnesol and its fatty acid esters from anal scent glands of nutria (Myocastor coypus) by gas chromatography–mass spectrometry and gas chromatography–infrared spectrometry
881
Characterization of (K0.5Na0.5)NbO3 powders and ceramics prepared by a novel hybrid method of sol–gel and ultrasonic atomization
882
Characterization of (m, 1)-transitive and (3,2)-transitive semi-complete directed graphs Original Research Article
883
Characterization of (Nd,Y)-TZP ceramics prepared by a colloidal suspension coating technique
884
Characterization of (Sn and Cu)/Pd catalysts for the nitrate reduction in natural water Original Research Article
885
Characterization of (Th,U)O2 fuel pellets made by impregnation technique
886
Characterization of (Th,U)O2 pellets made by advanced CAP process
887
Characterization of (Ti, Al)N films prepared by ion mixing and vapor deposition
888
Characterization of (Ti, Al)N films prepared by ion mixing and vapor deposition
889
Characterization of (Ti, Al)N films prepared by ion mixing and vapor deposition
890
Characterization of (Ti1−xAlx)N films prepared by radio frequency reactive magnetron sputtering
891
Characterization of (TiB + TiC)/TC4 in situ titanium matrix composites prepared by laser direct deposition
892
Characterization of (Tix Cr0.6−x)N0.4 coatings and their tribological behaviors against an epoxy molding compound
893
Characterization of (Y1-xCax)BaCo4-yZnyO7 as cathodes for intermediate temperature solid oxide fuel cells
894
Characterization of (ZnO)1−x(AlN)x/ZnO junction for optoelectronic applications
895
Characterization of (Zr1−xCex)0.84Y0.16O2−δ ceramics (0 ≤ x ≤ 0.1) derived by a wet chemical route
896
Characterization of [3H]Ryanodine Binding Sites in Mammalian Lung
897
Characterization of [Pd(pap)(NHC)I2]n (n = +1, 0, −1; pap = phenylazopyridine; NHC = N-heterocyclic carbene): Unusual coordination mode of pap and non-innocent behavior of NHC
898
Characterization of [ZnO]m[ZnMgO]n multiple quantum wells grown by molecular beam epitaxy
899
Characterization of ‘ARE’ deposited silicon nitride films and their feasibility as antireflection coating
900
Characterization of ‘basparin A,’ a prothrombin-activating metalloproteinase, from the venom of the snake Bothrops asper that inhibits platelet aggregation and induces defibrination and thrombosis
901
Characterization of ‘natural’ and ‘high-quality’ materials to improve perception of bio-plastics
902
Characterization of 0.93Pb(Zn1/3Nb2/3)O3–0.07BaTiO3 ceramics derived from a novel Zn3Nb2O8 B-site precursor
903
Characterization of 08Cr16Ni11Mo3 stainless steel irradiated in the BN-350 reactor
904
Characterization of 1,2-dibromoethane-degrading haloalkane dehalogenase from Bradyrhizobium japonicum USDA110
905
Characterization of 1,3-(beta)-glucanase and 1,3;1,4-(beta)-glucanase genes from Phytophthora infestans
906
Characterization of 1,3-alternate calix[4]arene-silica bonded stationary phases and their comparison to selected commercial columns by using principal component analysis
907
Characterization of 1,3-regiospecific lipases from new Pseudomonas and Bacillus isolates
908
CHARACTERIZATION OF 1.5 kJ COAXIAL PLASMA DISCHARGE
909
Characterization of 10 μm thick porous silicon dioxide obtained by complex oxidation process for RF application
910
Characterization of 100-kHz Noise in the Lightning Current Derivative Signals Measured at the CN Tower
911
Characterization of 109 Ah Ni–MH batteries charging with hydrogen sensing termination
912
Characterization of 11 beta-hydroxysteroid dehydrogenase activity and corticosteroid receptor expression in human osteosarcoma cell lines
913
Characterization of 12 Capsicum varieties by evaluation of their carotenoid profile and pungency determination
914
Characterization of 12-molybdophosphoric acid supported on mesoporous silica MCM-41 and its catalytic performance in the synthesis of hydroquinone diacetate
915
Characterization of 13 and 30 μm thick hydrogenated amorphous silicon diodes deposited over CMOS integrated circuits for particle detection application
916
Characterization of 13 and 30 μm thick hydrogenated amorphous silicon diodes deposited over CMOS integrated circuits for particle detection application
917
Characterization of 14-3-3-ζ Interactions with Integrin Tails
918
Characterization of 15N chemical shift tensors via 15N–13C REDOR and 15N–1H dipolar-shift CPMAS NMR spectroscopy
919
Characterization of 1600 Hamamatsu 16-anode photomultipliers for the MINOS Far detector
920
Characterization of 1600 Hamamatsu 16-anode photomultipliers for the MINOS Far detector
921
Characterization of 16SrII group phytoplasmas associated with alfalfa (Medicago sativa) witches’ broom disease in diverse areas of Iran
922
Characterization of 17 new cases of X-linked chronic granulomatous disease with seven novel mutations in the CYBB gene
923
Characterization of 17(beta)-Hydroxysteroid Dehydrogenase Type 7 in Reproductive Tissues of the Marmoset Monkey
924
Characterization of 17-4 PH stainless steel foam for biomedical applications in simulated body fluid and artificial saliva environments
925
Characterization of 1-greedy bases Original Research Article
926
Characterization of 1T-TiSe2 surface by means of STM and XPD experiments and model calculations
927
Characterization of 1T-TiSe2 surface by means of STM and XPD experiments and model calculations
928
Characterization of 2 Distinct Allyl Pyrophosphatase Activities from Rat-Liver Microsomes
929
Characterization of 2×2 full diversity space-time codes and inequivalent full rank spaces
930
Characterization of 2024-T3: An aerospace aluminum alloy
931
Characterization of 20q deletions in patients with myeloproliferative disorders or myelodysplastic syndromes
932
Characterization of 22 and 33 MeV quasi-monoenergetic neutron fields for detector calibration at CYRIC
933
Characterization of 22 and 33 MeV quasi-monoenergetic neutron fields for detector calibration at CYRIC
934
Characterization of 2-cocycles and 2-coboundaries on Direct Sum of Banach Algebras
935
Characterization of 2D macroporous silicon photonic crystals: Improving the photonic band identification in angular-dependent reflection spectroscopy in the mid-IR
936
Characterization of 2-D reflection pattern from textured front surfaces of silicon solar cells
937
Characterization of 2f-, 4f-, and 6f-background signals in wavelength modulation diode laser absorption spectrometry in graphite furnaces
938
Characterization of 2-phenylbenzo[g]quinoxaline derivatives as viscosity-sensitive fluorescent probes
939
Characterization of 3 MeV H+ irradiation induced defects in nuclear grade graphite
940
Characterization of 3 mm glass electrodes and development of RPC detectors for INO-ICAL experiment
941
Characterization of 3 mm glass electrodes and development of RPC detectors for INO-ICAL experiment
942
Characterization of 3,4-DHPEA-EDA oxidation products in virgin olive oil by high performance liquid chromatography coupled with mass spectrometry
943
Characterization of 316L(N)-IG SS joint produced by hot isostatic pressing technique
944
Characterization of 3-bridge links with infinitely many 3-bridge spheres
945
Characterization of 3C-SiC doped by nitrogen implantation
946
Characterization of 3C-SiC doped by nitrogen implantation
947
Characterization of 3C-SiC epilayers grown on 6H-SiC substrates by vacuum sublimation
948
Characterization of 3D molecular structure
949
Characterization of 3-D sequences of proteins
950
Characterization of 3D surface topography in 5-axis milling
951
Characterization of 3D thermal neutron semiconductor detectors
952
Characterization of 3D thermal neutron semiconductor detectors
953
Characterization of 3D-DDTC strip sensors with passing-through columns
954
Characterization of 3D-DDTC strip sensors with passing-through columns
955
Characterization of 3D-stc detectors fabricated at ITC-irst
956
Characterization of 3D-stc detectors fabricated at ITC-irst
957
Characterization of 3p, 5p, and 3q in two nasopharyngeal carcinoma cell lines, using region-specific multiplex fluorescence in situ hybridization probes
958
Characterization of 3-phase (ternary-like) n-type and p-type thermoelectric materials fabricated by explosive (shock-wave) consolidation
959
Characterization of 40-Gbit/s pulses generated using a lithium niobate modulator at 1550 nm using frequency resolved optical gating
960
Characterization of 430L porous supports obtained by powder extrusion moulding for their application in solid oxide fuel cells
961
Characterization of 49Ca as a γ-ray intensity standard
962
Characterization of 49Ca as a γ-ray intensity standard
963
Characterization of 4-hydroxy-2-nonenal metabolism in stellate cell lines derived from normal and cirrhotic rat liver
964
Characterization of 4-mercaptohydrocynnamic acid self-assembled film on Au(111) by means of X-ray photoelectron spectroscopy
965
Characterization of 4-methyl-2-oxo-1,2-dihydroquinolin-6-yl acetate as an effective antiplatelet agent Original Research Article
966
Characterization of 5 Episodes of Vancomycin Nonsusceptible
Streptococcus pneumoniae
From Clinical Isolates in Tehran, Iran
967
Characterization of 5′-upstream sequence of the latent membrane protein 1 (LMP-1) gene of an Epstein-Barr virus identified in nasopharyngeal carcinoma tissues
968
Characterization of 5-aminolevulinate synthase from Agrobacterium radiobacter, screening new inhibitors for 5-aminolevulinate dehydratase from Escherichia coli and their potential use for high 5-aminolevulinate production
969
Characterization of 5-chloro-8-methoxyquinoline appended diaza-18-crown-6 as a chemosensor for cadmium
970
Characterization of 5-HT transporter and receptor system in HeLaS3 cells by [3H]8-OH-DPAT and other serotonergic ligands
971
Characterization of 5q Deletions by Subtelomeric Probes and Spectral Karyotyping
972
Characterization of 600-μm-thick SI-GaAs detectors for medical imaging
973
Characterization of 600-μm-thick SI-GaAs detectors for medical imaging
974
Characterization of 600-μm-thick SI-GaAs detectors for medical imaging
975
Characterization of 6061-T6 aluminum alloy to AISI 1018 steel interfaces during joining and thermo-mechanical conditioning
976
Characterization of 6-mercaptopurine binding to bovine serum albumin and its displacement from the binding sites by quercetin and rutin
977
Characterization of 9p21 copy number alterations in human melanoma by fluorescence in situ hybridization
978
Characterization of a 1,4-dithiane gold self-assembled monolayer: an electrochemical sensor for the cyt-c redox process
979
Characterization of a 100 W SOFC stack fed by carbon monoxide rich fuels
980
Characterization of a 12-pdr wrought-iron cannonball from the Akko 1 shipwreck
981
Characterization of a 14 in * 17 in flat panel detector based on ion shower doped a-Si : H P-I-N diodes
982
Characterization of a 14Cr ODS steel by means of small punch and uniaxial testing with regard to creep and fatigue at elevated temperatures
983
Characterization of a 14q +marker chromosome in Philadelphia chromosome positive acute lymphoblastic leukemia by DNA analysis and fluorescence in situ hybridization
984
Characterization of a 16-vane strapped magnetron oscillator by three-dimensional particle-in-cell code simulations
985
Characterization of a 2.6 μm Kinetex porous shell hydrophilic interaction liquid chromatography column in supercritical fluid chromatography with a comparison to 3 μm totally porous silica
986
Characterization of a 20 kHz sonoreactor. Part II: analysis of chemical effects by classical and electrochemical methods
987
Characterization of a 20 kHz sonoreactor. Part II: analysis of chemical effects by classical and electrochemical methods
988
Characterization of a 212 kD protein, released into the host by the larva of the endoparasitoid Chelonus inanitus (Hymenoptera, Braconidae)
989
Characterization of a 2-Cys peroxiredoxin IV in Marsupenaeus japonicus (kuruma shrimp) and its role in the anti-viral immunity
990
Characterization of a 2D ionization chamber array for IMRT plan verification
991
Characterization of a 2D ionization chamber array for IMRT plan verification
992
Characterization of a 300 Hz thermoacoustically-driven pulse tube cooler
993
Characterization of a 3944 Da bacteriocin, produced by Enterococcus mundtii ST15, with activity against Gram-positive and Gram-negative bacteria
994
Characterization of a 40–90 MeV 7Li(p,n) neutron source at TIARA using a proton recoil telescope and a TOF method
995
Characterization of a 40–90 MeV 7Li(p,n) neutron source at TIARA using a proton recoil telescope and a TOF method
996
Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography
997
Characterization of a 7.5-kDa Protein Kinase C Substrate (RC3 Protein, Neurogranin) from Rat Brain
998
Characterization of a 7.5-kDa Protein Kinase C Substrate (RC3 Protein, Neurogranin) from Rat Brain
999
Characterization of a Bacillus subtilis 64-kDa DNA Polymerase X Potentially Involved in DNA Repair
1000
Characterization of a bacteriocin produced by Streptococcus thermophilus 81
