بر اساس عنوان

1
Experimental study on collisional disruption of highly porous icy bodies
2
Experimental study on combustion and emission characteristics of a hydrogen-enriched compressed natural gas engine under idling condition
3
Experimental study on combustion and emissions performance of a hybrid hydrogen–gasoline engine at lean burn limits
4
Experimental study on combustion and emissions performance of a hybrid syngas–gasoline engine
5
Experimental study on combustion and NOx emissions for a down-fired supercritical boiler with multiple-injection multiple-staging technology without overfire air
6
Experimental study on combustion and particle size distribution of a common rail diesel engine fueled with GTL/diesel blends
7
Experimental study on combustion characteristics of a spark-ignition engine fueled with natural gas–hydrogen blends combining with EGR
8
Experimental study on combustion in porous media with a reciprocating flow system
9
Experimental study on combustion of biomass micron fuel (BMF) in cyclone furnace
10
Experimental study on compressible flow in microtubes
11
Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement
12
Experimental Study on Compressive Strength of Brick Using Natural Fibres
13
Experimental study on concrete filled elliptical/oval steel tubular stub columns under compression
14
Experimental study on condensation heat transfer and pressure drop in horizontal smooth tube for R1234ze(E), R32 and R410A
15
Experimental study on condensation heat transfer and pressure drop of low GWP refrigerant HFO1234yf in a horizontal tube
16
Experimental study on condensation heat transfer characteristics of steam on horizontal twisted elliptical tubes
17
Experimental study on condensation heat transfer enhancement and pressure drop penalty factors in four microfin tubes
18
Experimental study on condensation heat transfer inside a single circular minichannel
19
Experimental study on controlling technique of surface deflection
20
Experimental study on convective coefficients in a slurry bubble column
21
Experimental study on convective heat transfer and flow resistance characteristics of water flow in twisted elliptical tubes
22
Experimental study on convective heat transfer in alternating elliptical axis tubes
23
Experimental Study on Cooling Efficiency of Hypersonic Optical Window
24
Experimental study on cooling enhancement of crushed rock layer with perforated ventilation pipe under air-tight top surface
25
Experimental study on cooling performance of minichannel heat sink using water-based MEPCM particles
26
Experimental study on cotton stalk combustion in a circulating fluidized bed
27
Experimental study on cotton stalk combustion in a circulating fluidized bed
28
Experimental Study on Crack Bridging in FRC under Uniaxial Fatigue Tension
29
Experimental study on crack curving propagation in bending beams under impulsive load
30
Experimental study on crashworthiness of tailor-welded blank (TWB) thin-walled high-strength steel (HSS) tubular structures
31
Experimental study on creep damage evolution process of Type IV cracking in 9Cr–0.5Mo–1.8W–VNb steel welded joint
32
Experimental study on creep–fatigue interaction behavior of GH4133B superalloy
33
Experimental study on critical heat flux in bilaterally heated narrow annuli
34
Experimental study on critical heat flux of high-velocity circular jet impingement boiling on the nano-characteristic stagnation zone
35
Experimental study on cyclic behavior of trapezoidally corrugated steel shear walls
36
Experimental study on cyclone air gasification of wood powder
37
Experimental study on damaged cylindrical shells under compression
38
Experimental study on debonding of shotcrete with acoustic emission during freezing and thawing cycle
39
Experimental Study on Deep Desulfurizer in LF Process Original Research Article
40
Experimental study on dehumidifier and regenerator of liquid desiccant cooling air conditioning system
41
Experimental study on density pump-out due to electron cyclotron heating in the compact helical system heliotron - torsatron
42
Experimental study on desulfurization efficiency and gas–liquid mass transfer in a new liquid-screen desulfurization system
43
Experimental study on dieless drawing of Nickel–Titanium alloy
44
Experimental study on dieless drawing of Nickel–Titanium alloy
45
Experimental study on diesel engine nitrogen oxide reduction running with jojoba methyl ester by exhaust gas recirculation
46
Experimental Study on Diesel Exhaust ParticlesAgglomeration Using Acoustic Waves
47
Experimental study on different heating rate kinetics of Indonesian and Inner Mongolian low rank coal for catalytic gasification
48
Experimental study on diffusive solid combustion behavior during transition from normal- to reduced-gravity
49
Experimental study on direct contact condensation of stable steam jet in water flow in a vertical pipe
50
Experimental study on direct shear behavior of frozen soil–concrete interface
51
Experimental study on discharge characteristics and ozone generation of dielectric barrier discharge in a cylinder–cylinder reactor and a wire–cylinder reactor
52
Experimental study on double pass solar air heater with thermal energy storage
53
Experimental study on double pass solar air heater with thermal energy storage
54
Experimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading
55
Experimental Study on Drag Reduction Characteristics of BionicEarthworm Self-Lubrication Surface
56
Experimental study on drag-reducing channel flow with surfactant additives––spatial structure of turbulence investigated by PIV system
57
Experimental study on droplet generation during excimer laser ablation of polyethylene glycol 1000
58
Experimental study on dUTPase-inhibitor candidate and dUTPase/disaccharide mixtures by PCS and ENS
59
Experimental Study on Dynamic Behavior of Acrylonitrile-Butadiene-Styrene (ABS) Based Nano Composite Reinforced by Nano Silica Addition
60
Experimental study on dynamic damage evolution of concrete under multi-axial stresses
61
Experimental study on dynamic load magnification factor for ballastless track-subgrade of high-speed railway
62
Experimental study on dynamic performance analysis of a flat-plate solar solid-adsorption refrigeration for ice maker
63
Experimental study on effect of compaction pressure on performance of SOFC anodes
64
Experimental study on effect of electric field on hydrate nucleation in supercooled tetra-n-butyl ammonium bromide aqueous solution
65
Experimental study on effect of inclination angles to ammonia pulsating heat pipe
66
Experimental study on effect of loading rate on mode I delamination of z-pin reinforced laminates
67
Experimental study on effect of relative humidity on heat transfer of an evaporating water droplet in air flow
68
Experimental study on effective range of miniature oscillating heat pipes
69
Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance
70
Experimental Study on Effects of Litter Material and its Quality on Foot Pad Dermatitis in Growing Turkeys
71
Experimental study on effects of moisture content on combustion characteristics of simulated municipal solid wastes in a fixed bed
72
Experimental study on effects of operating conditions and fuel quality on thermal efficiency and emission performance of a 300-MW boiler unit firing Thai lignite
73
Experimental study on Egyptian biomass combustion in circulating fluidized bed
74
Experimental study on ejector refrigeration system powered by low grade heat
75
Experimental study on electrochemical micromachining
76
Experimental study on electro-rheological material with grooved electrode surfaces
77
Experimental study on electrostastic particle deposition from gas–solids two-phase flow based on tribo-electrification
78
Experimental study on electrostatic atomization of highly viscous liquids
79
Experimental Study on Emission Performance of an LPP/TVC
80
Experimental study on emissions and performance of an internal combustion engine fueled with gasoline and gasoline/n-butanol blends
81
Experimental study on energy and exergy analyses of a diesel engine performed with multiple injection strategies: Effect of pre-injection timing
82
Experimental study on enhanced Brownian coagulation of sodium compound aerosol in the presence of gamma field
83
experimental study on enhanced oil recovery by low salinity water flooding on the fractured dolomite reservoir
84
Experimental study on enhancement of ammonia–water falling film absorption by adding nano-particles
85
Experimental study on enhancing the fuel efficiency of an anodic dead-end mode polymer electrolyte membrane fuel cell by oscillating the hydrogen
86
Experimental study on epoxy polystyrene as a partial substitution of fine aggregate of concrete mixture
87
Experimental study on equilibrium deviations in atmospheric pressure argon/helium surface wave discharges
88
Experimental study on equilibrium deviations in atmospheric pressure argon/helium surface wave discharges
89
Experimental study on equilibrium solubility (at low partial pressures), density, viscosity and corrosion rate of carbon dioxide in aqueous solutions of ascorbic acid
90
Experimental study on erosive wear of some metallic materials using Coriolis wear testing approach
91
Experimental study on ethanol/bentonite slurry injection into synthetic rock fractures: Application to seepage control
92
Experimental study on evacuation process in a stairwell of a high-rise building
93
Experimental study on evaluation and optimization of conversion of waste animal fat into biodiesel
94
Experimental study on evaporation heat transfer of CO2/DME mixture refrigerant in a horizontal smooth tube
95
Experimental study on evaporation, condensation and production of a new Tubular Solar Still Original Research Article
96
Experimental study on evaporator performance in mobile air conditioning system using HFO-1234yf as working fluid
97
Experimental Study on Evolution of Cavitation Flow Structure in Hump Region of Waterjet Pump
98
Experimental study on exhaust emissions from a multi-cylinder DME engine operating with EGR and oxidation catalyst
99
Experimental study on expansion characteristics of debris clouds produced by oblique hypervelocity impact of LY12 aluminum projectiles with thin LY12 aluminum plates
100
Experimental study on explosion suppression of vacuum chambers with different scales
101
Experimental study on fabrication and evaluation of micro pyramid-structured silicon surface using a V-tip of diamond grinding wheel
102
Experimental study on factors affecting the quality of ice crystal during the freezing concentration for the brackish water Original Research Article
103
Experimental study on fast pyrolysis of free-falling millimetric biomass particles between 800 °C and 1000 °C
104
Experimental study on fatigue behavior of corroded steel
105
Experimental study on fatigue behaviour of wire ropes
106
Experimental study on fatigue resistance of composite joints with protruding-head bolts
107
Experimental study on fighters behaviors mining
108
Experimental study on fist-ellipse for Chinese auto drivers
109
Experimental study on flame height and temperature profile of buoyant window spill plume from an under-ventilated compartment fire
110
Experimental study on flash evaporation from superheated water jets: Influencing factors and formulation of correlation
111
Experimental study on flooding and flow reversal in small diameter tubes with various inclinations and horizontal lengths
112
Experimental study on flow and local heat/mass transfer characteristics inside corrugated duct
113
Experimental study on flow and noise characteristics of NACA0018 airfoil
114
Experimental study on flow boiling heat transfer of multiport tubes with R245fa and R1234ze(E)
115
Experimental study on flow boiling of R134a and R410A in a horizontal microfin tube at high saturation temperatures
116
Experimental study on flow characteristics and pressure drop of gas–coal mixture through venturi
117
Experimental Study on Flow Characteristics Around Twin Wind Blades
118
Experimental study on flow characteristics of a vertically falling film flow of liquid metal NaK in a transverse magnetic field
119
Experimental study on flow characters of CH3CCl2F hydrate slurry
120
Experimental Study on Flow Optimization in Upper Plenum of Reactor Vessel for a Compact Sodium-Cooled Fast Reactor
121
Experimental study on flue gas purifying of MSW incineration using in-pipe jet adsorption techniques
122
Experimental study on fluid mixing phenomena in T-pipe junction with upstream elbow Original Research Article
123
Experimental study on fluidised bed combustion of high moisture municipal solid waste
124
Experimental study on fluidization of micronic powders
125
Experimental study on fly ash resistivity at temperatures above 673 K
126
Experimental study on force measurements for single point incremental forming
127
Experimental study on forced thermoacoustic oscillation driven by loudspeaker
128
Experimental study on fouling in the heat exchangers of surface water heat pumps
129
Experimental study on fracture performance of ultra-high toughness cementitious composites with J-integral
130
Experimental study on fracture toughness and tensile strength of a clay
131
Experimental study on freezing of water with supercooled region in a horizontal cylinder
132
Experimental study on Fricke gelatin gel dosimeters
133
Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions
134
Experimental study on friction and wear behaviour of amorphous carbon coatings for mechanical seals in cryogenic environment
135
Experimental study on friction factor and numerical simulation on flow and heat transfer in an alternating elliptical axis tube
136
Experimental study on Friction Stir Welding of copper metals
137
Experimental study on frost growth and dynamic performance of air source heat pump system
138
Experimental study on frosting control of mobile air conditioning system with microchannel evaporator
139
Experimental study on FRP-to-concrete bonded joints
140
Experimental study on gallium activity in the liquid Ga–In–Tl alloys by EMF method with zirconia solid electrolyte
141
Experimental Study on Gas Extraction Methods in Sichuan Basin Xujiahe Formation Extremely Thin Coal Seam
142
Experimental study on gas hydrate formation from natural gas mixture
143
Experimental study on gas production from methane hydrate in porous media by huff and puff method in Pilot-Scale Hydrate Simulator
144
Experimental study on gas production from methane hydrate in porous media by SAGD method
145
Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds
146
Experimental study on gas–solids flows in a circulating fluidised bed using electrical capacitance tomography
147
Experimental study on gelling property and plugging effect of inorganic gel system (OMGL)
148
Experimental study on glass edge machining flaw characterization
149
Experimental study on grinding of a sintered friction material
150
Experimental study on growth rate of clusters in ion-induced nucleation
151
Experimental study on hard turning hardened GCr15 steel with PCBN tool
152
Experimental study on healing of long bone defects treated with fibrin membrane enriched with platelet growth factors and periosteal mesenchymal stem cells in rabbit: radiographical and histopathological evaluations
153
Experimental study on heat and mass transfer characteristics of louvered fin-tube heat exchangers under wet condition
154
Experimental study on heat and moisture transfer in soil during soil heat charging for solar-soil source heat pump compound system
155
Experimental study on heat capacity of paraffin/water phase change emulsion
156
Experimental study on heat insulation performance of functionally graded metal/ceramic coatings and their fracture behavior at high surface temperatures
157
Experimental study on heat transfer and pressure drop characteristics of air–water two-phase flow with the effect of polyacrylamide additive in a horizontal circular tube
158
Experimental study on heat transfer and pressure drop of supercritical CO2 cooled in a large tube
159
Experimental study on heat transfer characteristics of circulatory flash evaporation
160
Experimental study on heat transfer characteristics of ice slurry
161
Experimental study on heat transfer coefficient between air and liquid in the cross-flow heat-source tower
162
Experimental study on heat transfer enhancement of a helically baffled heat exchanger combined with three-dimensional finned tubes
163
Experimental study on heat transfer enhancement of wavy finned flat tube with longitudinal vortex generators
164
Experimental study on heat transfer performance of lotus-type porous copper heat sink
165
EXPERIMENTAL STUDY ON HEAT TRANSFER TO FURANCE WALLS IN A SMALL LPG-FULLED FURANCE
166
Experimental study on heat-transfer characteristics of circular water jet impinging on high-temperature stainless steel plate
167
Experimental study on hepatic reinnervation after orthotopic liver transplantation in rats
168
Experimental study on heterogeneous slope responses to drawdown
169
Experimental study on HFC125 critical heat pump
170
Experimental study on HFC-161 mixture as an alternative refrigerant to R502
171
Experimental study on Hg0 removal by diperiodatocuprate (III) coordination ion solution
172
Experimental study on high pressure hydrogen jets coming out of tubes of 0.1–4.2 m in length
173
Experimental study on high strain rate behavior of high strength 600–1000 MPa dual phase steels and 1200 MPa fully martensitic steels
174
Experimental study on high temperature catalytic conversion of tars and organic sulfur compounds
175
Experimental study on high-strength concrete beams failing in shear
176
Experimental study on hollow structural component by explosive welding
177
Experimental study on horizontal wellbore cleanout by rotating jets
178
Experimental study on hot-leg U-bend two-phase natural circulation in a loop with a large diameter pipe
179
Experimental study on hot-leg U-bend two-phase natural circulation in a loop with a large diameter pipe Original Research Article
180
Experimental study on household refrigerator with diffuser pipe
181
Experimental study on H-shaped steel beam-columns with large width-thickness ratios under cyclic bending about weak-axis
182
Experimental study on hybrid CFRP-PU strengthening effect on RC panels under blast loading
183
Experimental study on hydraulic fracturing of soft rocks: Influence of fluid rheology and confining stress
184
Experimental study on hydrodynamic behaviors of high-speed gas jets in still water
185
Experimental study on hydrodynamic characteristics of gas–solid pulsed fluidized bed
186
Experimental study on hydrodynamic characteristics of upward gas–liquid slug flow
187
Experimental study on hydrogen behavior at a subcompartment in the containment building Original Research Article
188
Experimental study on hydrogen explosions in a full-scale hydrogen filling station model
189
Experimental study on hydrothermal annealing of fission tracks in zircon
190
Experimental study on hygrothermal behaviour of retrofit solutions applied to old building walls
191
Experimental study on ignition of pre-mixed gases with steam under catalytic reforming reaction
192
Experimental study on impact resistance and mechanical characteristics of low-temperature sintered Al2O3–ZrO2 composites with anti-sandwich structure
193
Experimental study on improved two-bed silica gel–water adsorption chiller
194
Experimental study on impulsive synchronization between two modified Chuaʹs circuits
195
Experimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique
196
Experimental study on influence of particle size on cooling effect of crushed-rock layer under closed and open tops
197
Experimental study on influence of section thickness on mechanical behavior of die-cast AM60 magnesium alloy
198
Experimental Study on Influence of Using Urease Enzyme on Stabilized Sandy Soil’s Engineering Property by Zeolite and Sawdust
199
Experimental study on inhibitory effects of histone deacetylase inhibitor MS-275 and TSA on bladder cancer cells
200
Experimental study on injection characteristics of fatty acid esters on a diesel engine common rail system
201
Experimental study on instability of bases on natural and lime/cement-stabilized clayey soils
202
Experimental study on interaction between matrix crack and fiber bundles using optical caustic method
203
Experimental study on interaction between soil and ground heat exchange pipe at low temperature
204
Experimental study on interfacial area transport in vertical upward bubbly two-phase flow in an annulus
205
Experimental study on interfacial shear transfer in partially-debonded aluminum/epoxy joint
206
Experimental study on interfacial waves in stratified horizontal oil–water flow
207
Experimental study on interfacial waves in vertical core flow
208
Experimental study on in-vessel debris coolability in ALPHA program
209
Experimental study on in-vessel debris coolability in ALPHA program
210
Experimental study on in-vessel debris coolability in ALPHA program Original Research Article
211
Experimental study on isothermal adsorption of methane gas on three shale samples from Upper Paleozoic strata of the Ordos Basin
212
Experimental study on joint of spliced steel–PSC hybrid girder, Part I: Proposed parallel-perfobond-rib-type joint
213
Experimental study on joint of spliced steel–PSC hybrid girder, part II: Full-scale test of spliced hybrid I-girder
214
Experimental study on kinematics of sea ice floes in regular waves
215
Experimental Study on LacoO3 on Catalytic Converter
216
Experimental study on laminar flow forced-convection in a channel with upper V-corrugated plate heated by radiation
217
EXPERIMENTAL STUDY ON LARGE-AMPLITUDE VIBRATIONS OF WATER-FILLED CIRCULAR CYLINDRICAL SHELLS
218
Experimental study on lateral mixing of particles in a quasi-slot-rectangular spouted bed
219
Experimental study on LBB behaviour of LMFBR pipe elbows
220
Experimental Study on Light Weight Concrete-Filled Steel Tubes
221
Experimental study on liquid flow and heat transfer in micro square pin fin heat sink
222
Experimental study on local buckling of axially compressed steel stub columns at elevated temperatures
223
Experimental study on local characteristics of oil–water dispersed flow in a vertical pipe
224
Experimental study on locomotive driver cabin adsorption air conditioning prototype machine
225
Experimental Study on Loop Heat Pipe Under Horizontal Condition With Different Working Fluids
226
Experimental Study on Low-Frequency Oscillating Behavior in Mechanically-Ventilated Compartment Fires
227
Experimental study on lubrication regime variation in point contacts
228
Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
229
Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
230
Experimental Study on Manufacturing of Tailor Friction Stir Welded Aluminium Blanks
231
Experimental study on marangoni convection and solidification in BaB2O4 melt
232
Experimental study on Marangoni effect induced by heat and mass transfer
233
Experimental study on mass transfer of a co-current gas–liquid contactor performing under high gas velocities
234
Experimental study on mass transfer performances of cross flow dehumidifier using liquid desiccant
235
Experimental study on material properties of hot rolled and continuously cast aluminum strips in cold rolling
236
Experimental study on mechanical behavior of brittle marble samples containing different flaws under uniaxial compression
237
Experimental study on mechanical behavior of laminates at low temperature Original Research Article
238
Experimental study on mechanical performance of all-softwood pegged mortice and tenon connections
239
EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES AND MICROSTRUCTURES IN A 36 REPAIR BUTT WELDMENT
240
Experimental study on mechanical properties of different lightweight aggregate concretes
241
Experimental Study on Mechanical Properties of Randomly Oriented Natural Fiber Hybrid Composites
242
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag
243
Experimental study on mechanism of rail corrugation using corrugation simulator
244
Experimental study on melting/solidification characteristics of a paraffin as PCM
245
Experimental study on mercury release behavior and speciation during pyrolysis of two different coals
246
Experimental study on mercury transformation and removal in coal-fired boiler flue gases
247
Experimental study on methanol recovery through flashing vaporation in continuous production of biodiesel via supercritical methanol
248
Experimental study on micellar-enhanced ultrafiltration (MEUF) of aqueous solution and wastewater containing lead ion with mixed surfactants Original Research Article
249
Experimental study on micro EDM-drilling of Ti6Al4V using helical electrode
250
Experimental study on micro modular combustor for micro-thermophotovoltaic system application
251
Experimental Study on Microbial Induced Calcium Carbonate Precipitation to Enhance Reservoir Recovery
252
Experimental study on microchannel heat sinks considering mass flow distribution with non-uniform heat flux conditions
253
Experimental study on microscopic moving characteristics of pedestrians in built corridor based on digital image processing
254
Experimental study on microscopic wear mechanism of copper/carbon/rice bran ceramics composites
255
Experimental study on microwave drying of Chinese and Indonesian low-rank coals
256
Experimental study on mitigating the cathode flooding at low temperature by adding hydrogen to the cathode reactant gas in PEM fuel cell
257
Experimental Study on Mixed Convection Heat Transfer in a Square Duct with Varying Inclination Angles
258
Experimental study on mixing and precipitation in a fluidized bed reactor
259
Experimental study on mode I fracture toughness of different asphalt mixtures
260
Experimental Study on Moment-Plastic Rotation Capacity of Hybrid Beams
261
Experimental study on moving neutralization reaction boundary created with the strong reactive electrolytes of HCl and NaOH in agarose gel
262
Experimental study on multicomponent distillation in packed columns
263
Experimental study on multi-layered type of gas-to-gas heat exchanger using porous media
264
Experimental study on multi-pass dieless drawing process of superplastic Zn–22%Al alloy microtubes
265
Experimental study on multi-split air conditioner with digital scroll compressor
266
Experimental study on natural circulation precooling of cryogenic pump system with gas phase inlet reflux configuration Original Research Article
267
Experimental study on natural convective heat transfer from a vertical plate with discrete heat sources mounted on the back
268
Experimental study on natural ventilation performance of one-sided wind catcher
269
Experimental study on neptunium migration under in situ geochemical conditions
270
Experimental study on neutrinoless double beta decay of
271
Experimental study on neutrinoless double beta decay of
272
Experimental study on new hybrid approach to electron multiplication
273
Experimental study on new hybrid approach to electron multiplication
274
Experimental study on non-equilibrium fraction of NaCl solution circulatory flash evaporation Original Research Article
275
Experimental study on non-woody biomass gasification in a downdraft gasifier
276
Experimental study on NOx reduction from staging combustion of high volatile pulverized coals. Part 1. Air staging
277
Experimental study on nucleate boiling enhancement and bubble dynamic behavior in saturated pool boiling using a nonuniform dc electric field
278
Experimental study on oil–water flow in horizontal and slightly inclined pipes
279
Experimental study on operating parameters of miniature loop heat pipe with flat evaporator
280
Experimental study on optimized composition of mixed carbonate salt for sensible heat storage in solar thermal power plant
281
Experimental Study on Overall Cooling Effectiveness of Turbine Nozzle Guide Vane with Impingement-Cutback Structure
282
Experimental study on parallel and counter flow configuration of a shell and helically coiled tube heat exchanger using AI2O3 / water nanofluid
283
Experimental study on partially deteriorated strength concrete columns confined with CFRP
284
Experimental study on particle fluctuation velocity of a horizontal pneumatic conveying near the minimum conveying velocity
285
Experimental study on particles mixing in an annular spouted bed
286
Experimental study on particulate and NOx emissions of a diesel engine fueled with ultra low sulfur diesel, RME-diesel blends and PME-diesel blends Original Research Article
287
Experimental study on particulate emission of a diesel engine fueled with blended ethanol–dodecanol–diesel
288
Experimental study on passive Soil Depressurisation System to prevent soil gaseous pollutants into building
289
Experimental Study On Performance an‎d Emissions Of A Diesel Engine Using Ethanol an‎d Biodiesel Blended Diesel Fuels
290
Experimental study on performance and emissions of a high speed diesel engine fuelled with n-butanol diesel blends under premixed low temperature combustion
291
Experimental study on performance and emissions of engine fueled with lower heat value gas–hydrogen mixtures
292
Experimental study on performance and exhaust emissions of a diesel engine fuelled with Ceiba pentandra biodiesel blends
293
Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics
294
Experimental study on performance improvement of a four-bed adsorption chiller by using heat and mass recovery
295
Experimental Study on Performance of Ductile and Non-ductile Reinforced Concrete Exterior Beam-column Joint
296
Experimental Study on Performance of Fiber Concrete-filled Tube Columns under Axial Loading
297
Experimental Study on Performance of Modified Hybrid Liquid Membrane Process for Removal of Cadmium from Wastewater
298
Experimental study on performance of repaired and strengthened unreinforced masonry walls using polypropylene bands
299
Experimental study on permeability of crushed gangues during compaction
300
Experimental Study on Permeability Stress Sensitivity in Tight Sandstone Oil Reservoirs
301
Experimental study on phase relationships in the Si-rich portion of the Nb–Si–W ternary system
302
Experimental Study on Photovoltaic Cooling System Integrated With Carbon Nano Fluid
303
Experimental study on physiological and psychological effects of heat acclimatization in extreme hot environments
304
Experimental study on Plasmodium bergheiAnopheles stephensiBALB/c mouse system; implications for malaria transmission blocking assays
305
Experimental study on polymer-modified mortars with silica fume applied to fix porcelain tile
306
Experimental study on porous current collectors of PEM electrolyzers
307
Experimental study on Portland cement pervious concrete mechanical and hydrological properties
308
Experimental study on preheating and combustion characteristics of pulverized anthracite coal
309
Experimental study on premixed CH4/air mixture combustion in micro Swiss-roll combustors
310
Experimental Study on Premixed Flame Acceleration in Closed Pipe
311
Experimental study on premixed hydrogen/air and hydrogen–methane/air mixtures explosion in 90 degree bend pipeline
312
Experimental study on preparation of LaMO3 (M = Fe, Co, Ni) nanocrystals and their catalytic activity
313
Experimental study on pressure drop and heat transfer in pipelines for brine based ice slurry Part II: Dimensional analysis and rheological model
314
Experimental study on pressure drop and heat transfer in pipelines for brine based ice slurry. Part I: Operational parameters correlations
315
Experimental study on pressure drops in a dividing wall distillation column
316
Experimental Study on Preventing Formation Damage Due to Clay Swelling Caused by Water Based Drilling Fluid Using Aluminum Ion Based Clay Inhibitor
317
Experimental study on process of cold-power spinning of Ti–15–3 alloy
318
Experimental study on process of precision forging of an aluminium-alloy rotor
319
Experimental study on propagation of hydraulic fracture in volcanic rocks using industrial CT technology
320
Experimental study on propane combustion in a novel fluidized bed configuration
321
Experimental study on properties of pervious concrete pavement materials
322
Experimental study on properties of polymer-modified cement mortars with silica fume
323
Experimental Study on Protective Role of NSAID on Articular Cartilage Destruction in Septic Arthritis
324
Experimental study on prototype optimisation algorithms for prototype-based classification in vector spaces
325
Experimental study on pulsating heat pipe with functional thermal fluids
326
Experimental study on pulse tube refrigeration with helium and nitrogen mixtures Original Research Article
327
Experimental Study on Puncture Resistance of 2D and 3D Glass Fabrics Reinforced with Shear Thickening Fluid
328
Experimental study on p–V indicator diagrams of twin-screw refrigeration compressor with economizer
329
Experimental study on PV module recycling with organic solvent method
330
Experimental study on pyrolysis of thermally thick biomass residues samples: Intra-sample temperature distribution and effect of sample weight (“scaling effect”)
331
Experimental study on R-134a refrigeration system using a two-phase ejector as an expansion device
332
Experimental study on R-600a boiling in 2.6 mm tube
333
Experimental study on radiation performance of probe-fed suspended plate antennas
334
Experimental study on radiative properties of air plasma sprayed thermal barrier coatings
335
Experimental study on rapid solidification process using a novel ultrasound technique
336
Experimental study on rapid solidification process using a novel ultrasound technique
337
Experimental study on ratcheting behavior of eutectic tin–lead solder under multiaxial loading
338
Experimental study on ratchetting-fatigue interaction of SS304 stainless steel in uniaxial cyclic stressing
339
Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips
340
Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips
341
EXPERIMENTAL STUDY ON RATE OF SOLIDIFICATION OF CENTRIFUGAL CASTING
342
Experimental Study on Rational Water Injection Rate in Continental Sandstone Reservoirs
343
Experimental study on ratios of coherent scattering to Compton scattering for elements with atomic numbers 26⩽Z⩽82 in 59.5 keV for 55° and 115°
344
Experimental study on RC beams with FRP strips bonded with rubber modified resins
345
Experimental Study on RC Deep Beams with Non-Prestressed Tendons as Main Reinforcement
346
Experimental study on reactive power compensation using a fuzzy logic controlled synchronous motor
347
Experimental study on reburning/advanced reburning performance of limestone modified by wood vinegar for NO reduction under O2/CO2 atmosphere
348
Experimental Study on Recycled Concrete Aggregates with Rice Husk Ash as Partial Cement Replacement
349
Experimental study on reducing cogging torque and no-load power loss in axial-flux permanent-magnet machines with slotted winding
350
Experimental study on reducing the noise of horizontal household freezers
351
Experimental study on regaining the tangential velocity energy of axial flow pump
352
Experimental study on rehabilitation of corrosion-damaged reinforced concrete beams with carbon fiber reinforced polymer
353
Experimental Study on Rehabilitation of RC Beams Using Epoxy Resins
354
Experimental study on reinforced stone beams
355
Experimental study on relation between scour and complex 3D ow field
356
Experimental Study on Relationship Between Mechanical, Seepage Characteristics and 3D Morphology Parameters of Marble Joint
357
Experimental Study on Relationship of Applied Power And Feeding Rate on Production of Polyurethane Nanofibre
358
Experimental study on repair of fatigue cracks at welded web gusset joint using CFRP strips
359
Experimental study on repairing of nude mice skin defects with composite skin consisting of xenogeneic dermis and epidermal stem cells and hair follicle dermal papilla cells
360
Experimental Study on Restoration of Polluted Groundwater from in Situ Leaching Uranium Mining with Sulfate Reducing Bacteria and ZVI-SRB
361
Experimental study on rice husk combustion in a circulating fluidized bed
362
Experimental study on rice husk combustion in a vortexing fluidized-bed with flue gas recirculation (FGR)
363
Experimental study on roll-bond collector/evaporator with optimized-channel used in direct expansion solar assisted heat pump water heating system
364
Experimental study on roughness effects on turbulent boundary layer flow over a two-dimensional steep hill
365
Experimental study on saturated flow boiling heat transfer of R170/R290 mixtures in a horizontal tube
366
Experimental study on sawdust air gasification in an entrained-flow reactor
367
Experimental study on scaling of RC beams under close-in blast loading
368
Experimental study on scaling the explosion resistance of a one-way square reinforced concrete slab under a close-in blast loading
369
Experimental Study on Seakeeping Performance of a Catamaran with Asymmetric Demi-Hulls
370
Experimental study on seawater-pipeline internal corrosion monitoring system
371
Experimental study on seismic behavior of RC frames strengthened with CFRP sheets
372
Experimental Study on Seismic Performance of Reinforced Concrete Frame Columns Supported with Post-build Wing Walls
373
Experimental study on seismic strengthening of RC columns with wrapped CFRP sheets
374
Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates
375
Experimental study on self-excitations in nitrogen-diluted laminar lifted butane flames
376
Experimental study on self-healing of crack in clay seepage barrier
377
Experimental study on separation performance of nanofiltration membranes for bicarbonate salts solution Original Research Article
378
Experimental study on settlement and punching behavior of full-scale RC and SFRC precast tunnel lining segments
379
EXPERIMENTAL STUDY ON SEVERAL LEFT-HANDED MATAMATERIALS
380
Experimental Study on Shear Behaviour of High Strength Reinforced Recycled Concrete Beam
381
Experimental study on shear fatigue behavior and stiffness performance of Warm Mix Asphalt by adding synthetic wax
382
Experimental study on shear fracture of rock with cylindrical specimens
383
Experimental study on shear properties of porous metal fiber sintered sheet
384
Experimental study on shear strength of beam-and-block floors
385
Experimental Study on Shear Strength of High-Strength Concrete Beams
386
EXPERIMENTAL STUDY ON SHEAR STRENGTH OF HOLLOW CYLINDRICAL SPUN CAST CONCRETE ELEMENTS; LOCAL BEHAVIOUR
387
Experimental study on SI engine fuelled with butanol–gasoline blend and H2O addition
388
Experimental study on side-reaction occurrence condition in the iodine–sulfur thermochemical hydrogen production process
389
Experimental study on silicate-melt inclusions in clinopyroxene phenocrysts from Roccamonfina lavas (Italy)
390
Experimental study on silicon micro-heat pipe arrays
391
Experimental study on simulated molten jet-coolant interactions Original Research Article
392
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load
393
Experimental study on single-phase heat transfer of natural circulation in circular pipe under rolling motion condition
394
Experimental Study on Slug Flow Characteristics and its Suppression by Microbubbles in Gas-Liquid Mixture Pipeline
395
EXPERIMENTAL STUDY ON SMALL CYCLONES OPERATING AT HIGH FLOWRATES
396
Experimental study on smoke movement leading to glass damages in double-skinned façade
397
Experimental study on solar assisted heat pump system for heat supply
398
Experimental study on sound and damaged mortar: Variation of ultrasonic parameters with porosity
399
Experimental study on spatial uniformity of H− ion beam in a large negative ion source
400
Experimental study on split air conditioner with new hybrid equipment of energy storage and water heater all year round
401
Experimental study on spray break-up and atomization processes from GDI injector using high injection pressure up to 30 MPa
402
Experimental study on spray combustion characteristics of gasoline–diesel blended fuel in a controllable active thermo-atmosphere
403
Experimental study on spreading and evaporation of inkjet printed pico-liter droplet on a heated substrate
404
Experimental study on stability of an MR fluid damper-rotor-journal bearing system
405
Experimental study on stability of different solid contact arrangements of ion-selective electrodes
406
Experimental study on stable steam condensation in a quenching tank
407
Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete
408
Experimental study on static and fatigue strength of loop joints
409
Experimental study on static and impact strength of sintered agglomerates
410
Experimental study on static characteristics of the bridge deck section under simultaneous actions of wind and rain
411
Experimental study on static flash evaporation of aqueous NaCl solution
412
Experimental study on static flash evaporation of aqueous NaCl solution at different flash speed: Heat transfer characteristics
413
Experimental study on static/circulatory flash evaporation
414
Experimental study on steel tubular columns in-filled with plain and steel fiber reinforced concrete
415
Experimental study on steel-concrete composite beams curved in plan
416
Experimental study on stepless capacity regulation for reciprocating compressor based on novel rotary control valve
417
Experimental study on strength and deformation of plain concrete under triaxial compression after freeze-thaw cycles
418
Experimental study on strength and ductility of carbonated concrete elements
419
Experimental Study on Structural Degradation of CFRP Strengthened RC Beams Subjected to Weak Interfaces
420
Experimental study on subsea pipeline bedding condition assessment using wavelet packet transform
421
Experimental study on surface integrity in end milling of Hastelloy C-2000 superalloy
422
Experimental Study on Surface Integrity of Ti6Al4V by Broaching
423
Experimental study on surface pressure and flow structure around a triangular prism located behind a porous fence
424
Experimental Study on Surface Roughness and Cutting Force in Turning of Al7032 Reinforced with SiC Using Taguchi Design
425
Experimental Study on Surface Roughness and Flatness in Lapping of AISI 52100 Steel
426
Experimental study on surface wave propagating through a grease–pancake ice mixture
427
Experimental study on symmetry breaking in a swirling free-surface cylinder flow influenced by viscoelasticity
428
Experimental study on syngas production by co-gasification of coal and biomass in a fluidized bed
429
Experimental study on temperatures and energy partition at the diamond–granite interface in grinding
430
Experimental Study on TGA, XRD and SEM Analysis of Concrete with Ultra-fine Slag (TECHNICAL NOTE)
431
Experimental study on the added mass and damping of a disk submerged in a partially fluid-filled tank with small radial confinement
432
Experimental study on the adiabatic absorption of water vapor into LiBr–H2O solutions
433
Experimental Study on the Adsorption of Water and Ethanol by Cornmeal for Ethanol Dehydration
434
Experimental Study on the Aeroacoustic Behavior of a Forward-Curved Blades Centrifugal Fan
435
Experimental Study on the Aeroacoustic Behavior of a Forward-Curved Blades Centrifugal Fan
436
Experimental study on the aerodynamic forces on railway vehicles in presence of turbulence
437
Experimental Study on the Aerodynamic Performance of Swept Curved Blade
438
Experimental study on the air velocity effect on the efficiency and fresh water production in a forced convective double slope solar still
439
Experimental study on the air/water counter-current flow limitation in a model of the hot leg of a pressurized water reactor Original Research Article
440
Experimental study on the anisotropic behavior of textured NiTi pseudoelastic shape memory alloys
441
Experimental study on the anisotropic behavior of textured NiTi pseudoelastic shape memory alloys
442
Experimental study on the anti-fouling effects of Ni–Cu–P-PTFE deposit surface of heat exchangers
443
Experimental study on the as-cast solidification of the Si-rich alloys of the Nb–Si–Mo ternary system
444
Experimental study on the auto-ignition and combustion characteristics in the homogeneous charge compression ignition (HCCI) combustion operation with ethanol/n-heptane blend fuels by port injection
445
Experimental study on the bandgap narrowings of TiO2 films calcined under N2 or NH3 atmosphere
446
Experimental Study on the Behavior of TiN and Ti2O3 Inclusionsin Contact with CaO-Al2O3-SiO2-MgO Slags
447
Experimental study on the behaviors and shape changes of premixed hydrogen–air flames propagating in horizontal duct
448
Experimental Study on the Bending Behavior of 3D Woven Glass Fiber Sandwich Composite Panels
449
Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature
450
Experimental study on the bioaccumulation of oxytetracycline and oxolinic acid by the blue mussel (Mytilus edulis). An evaluation of its ability to bio-monitor antibiotics in the marine environment
451
Experimental Study on the Bond Strength of Concrete-Steel Composite Columns
452
Experimental study on the characteristic stages of premixed hydrogen-air flame propagation in a horizontal rectangular closed duct
453
Experimental study on the characteristics of heat transfer and flow resistance in turbulent pipe flows of viscoelastic-fluid-based Cu nanofluid
454
Experimental study on the characteristics of pad fluttering in a tilting pad journal bearing
455
Experimental study on the characteristics of thermal conductivity and shear viscosity of viscoelastic-fluid-based nanofluids containing multiwalled carbon nanotubes
456
Experimental study on the characterization of worn surface topography with characteristic roughness parameter
457
Experimental study on the coal tar hydrocracking process in supercritical solvents
458
Experimental study on the collection efficiency of membrane filters
459
Experimental study on the combinative action of zinc chloride and triethanolamine on improving photosensitivity in red-sensitized dichromated gelatin
460
Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer composites
461
Experimental study on the condensation of supersonic steam jet submerged in quiescent subcooled water: Steam plume shape and heat transfer
462
Experimental study on the confined 3D laminar flow past a square prism with a high blockage ratio
463
Experimental study on the constitutive relation of austenitic stainless steel S31608 under monotonic and cyclic loading
464
Experimental study on the contact angle formation of solidified iron–chromium droplets onto yttria ceramic substrates for the yttria/ferrous alloy system with variable chromium content
465
Experimental study on the contact patch pressure and sinkage of a lightweight vehicle on sand
466
Experimental study on the convective heat transfer coefficient of early-age concrete
467
Experimental study on the creep behavior of frozen clay with thermal gradient
468
Experimental study on the cyclic deformation and plastic flow of U71Mn rail steel
469
Experimental study on the cyclic deformation and plastic flow of U71Mn rail steel
470
Experimental study on the cyclic deformation and plastic flow of U71Mn rail steel
471
Experimental study on the deformation of erythrocytes under optically trapping and stretching
472
Experimental study on the design of orifice pulse tube refrigerator
473
Experimental study on the determination of strength of masonry walls
474
Experimental study on the development of collapse of overhanging layers of gully in Yuanmou Valley, China
475
Experimental study on the development of compressive strength of early concrete age using calcium-based hardening accelerator and high early strength cement
476
Experimental study on the direct liquefaction of Cunninghamia lanceolata in water
477
Experimental study on the direct/indirect contact energy storage container in mobilized thermal energy system (M-TES)
478
Experimental Study on the Discharge Coefficient of Bi-Swirl Coaxial Injectors
479
Experimental Study on the Discharge Coefficient of Triangular Piano Key Side Weirs with Different Geometries
480
Experimental study on the double-evaporator thermosiphon for cooling HTS (high temperature superconductor) system Original Research Article
481
Experimental study on the dryout heat flux of falling liquid film
482
Experimental study on the dynamic behavior of TiNi cantilever beams with rectangular cross-section under transversal impact
483
Experimental study on the dynamic characteristics of adsorption heat pumps driven by intermittent heat source at heating mode
484
Experimental study on the dynamic characteristics of kW-scale molten carbonate fuel cell systems
485
Experimental Study on the Dynamic Performance of a New High-Speed Spindle Supported by Water-Lubricated Hybrid Bearings
486
Experimental study on the dynamic response of gravity-designed reinforced concrete connections
487
Experimental study on the dynamic tensile behavior of a poly-crystal pure titanium at elevated temperatures
488
Experimental Study on the Dynamics of a Moving Droplet Impacting a Sessile Droplet
489
Experimental study on the effect of applying a crossed electric field on the breakdown behavior of low vacuum
490
Experimental Study on the Effect of Attachments on the Vortex-Induced Vibration of a Centrally Slotted Box Deck
491
Experimental study on the effect of braiding angle on the fracture behavior of 2D braided composite cylinders
492
Experimental study on the effect of coal to liquid on combustion and emission of heavy-duty diesel engine with exhaust gas recirculation
493
Experimental study on the effect of combustor configuration on the performance of dual-mode combustor
494
Experimental Study on the Effect of Crumb Rubber on Shear Strength of Sandy Soil
495
Experimental study on the effect of different CO2 concentrations on soot and gas products from ethylene thermal decomposition
496
Experimental study on the effect of drag reducing polymer on flow patterns and drag reduction in a horizontal oil–water flow
497
Experimental Study on the Effect of Eccentric Loads on the Bearing Capacity of Strip Footing Located on the Inclined Multi-Layer Soil Mass with a Weak Soil Layer
498
Experimental study on the effect of frost heave prevention using soilbags
499
Experimental study on the effect of frost parameters on domestic refrigerator finned tube evaporator coils
500
Experimental Study on the Effect of Glass and Carbon Fibers on Physical and Micro-Structure Behavior of Asphalt
501
Experimental study on the effect of glass transition on moisture profiles and stress-crack formation during continuous and time-varying drying of maize kernels
502
Experimental study on the effect of heat transfer enhancement devices in flat-plate solar collectors
503
Experimental study on the effect of high power ultrasonic on the mechanical properties of concrete
504
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube
505
Experimental Study on the Effect of Moisture Content on Hysteretic Behavior of Reinforced Concrete Columns
506
Experimental study on the effect of N2, CO2, and steam dilution on the combustion performance of H2 and CO synthetic gas in an industrial gas turbine
507
Experimental study on the effect of pulsating inflow to an enclosure for improved mixing
508
Experimental study on the effect of pyrolysis pressure, peak temperature, and particle size on the potential stability of vine shoots-derived biochar
509
Experimental study on the effect of rock pressure on sandstone permeability
510
Experimental Study on the Effect of Single Spur-dike with Slope Sides on Local Scour Pattern
511
Experimental Study on the Effect of Tabs with Asymmetric Projections on the Mixing Characteristics of Subsonic Jets
512
Experimental study on the effect of wavelength in the laser cleaning of silver threads
513
Experimental Study on the Effective Thermal Conductivity and Thermal Diffusivity of Nanofluids
514
Experimental study on the effective width of flat slab structures under dynamic seismic loading
515
Experimental study on the effectiveness of fiber sheet reinforcement on the explosive-resistant performance of concrete plates
516
Experimental study on the effects of acoustic streaming of high frequency ultrasonic waves on convective heat transfer: Effects of transducer position and wave interference
517
Experimental study on the effects of crustal temperature and composition on assimilation with fractional crystallization at the floor of magma chambers
518
Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on AL2024T3 Joint Strength
519
Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine
520
Experimental study on the effects of HP and LP EGR in an automotive turbocharged diesel engine
521
Experimental study on the effects of operating parameters on the performance of a transpiring-wall supercritical water oxidation reactor Original Research Article
522
Experimental Study on the Effects of Recycled Concrete Powder on Properties of Self-Compacting Concrete
523
Experimental study on the effects of surface treatment reagents on tensile properties of Banana fiber reinforced polyester composites
524
Experimental study on the effects of the boundary conditions on the deformations of composite plates
525
Experimental study on the effects of the operation conditions on the performance of a chemisorption air conditioner powered by low grade heat
526
Experimental study on the effects of visualized functionally abstracted information on process control tasks
527
Experimental study on the effects of visualized functionally abstracted information on process control tasks
528
Experimental Study on the Effects of Water-in-oil Emulsions to Wall Shear Stress in the Pipeline Flow
529
Experimental study on the elimination of over-plating problems in industrial manufacturing of large-area acidic-textured laser-doped multi-crystalline solar cells
530
Experimental study on the enhancement of heat transfer between water interfaced with higher thermal conductivity liquid
531
Experimental study on the evaporative heat transfer and pressure drop of CO2 flowing upward in vertical smooth and micro-fin tubes with the diameter of 5 mm
532
Experimental Study on the Factors Affecting Hexavalent Chromium Bioreduction by Bacillus cereus
533
Experimental study on the failure mechanism of recycled concrete
534
Experimental study on the fatigue behaviour of welded tubular K-joints for bridges
535
Experimental study on the flexural behaviour of multi-span transparent glass–GFRP composite beams
536
Experimental study on the flow and heat transfer characteristics of a tetra-n-butyl ammonium bromide hydrate slurry (first report: Flow characteristics)
537
Experimental study on the flow and heat transfer characteristics of a tetra-n-butyl ammonium bromide hydrate slurry (second report: Heat transfer characteristics)
538
Experimental Study on the Flow Pattern of Double-hemisphere Rough Elements with Different Streamwise Spacing
539
Experimental study on the forced convective flow in a channel with heated blocks in tandem
540
Experimental study on the formation and growth of electroless nickel–boron coatings from borohydride-reduced bath on mild steel
541
Experimental study on the formation of higher fluorocarbons from CF4 by a tip–tip electrical arc discharge at very high pressure
542
Experimental Study on the Friction Drag Reduction of Superhydrophobic Surfaces in Closed Channel Flow
543
EXPERIMENTAL STUDY ON THE GAS-LIQUID FLOW IN THE MEMBRANE MICROPORE AERATION BIOREACTOR
544
Experimental study on the gas–solid suspension flow in a square cyclone separator
545
Experimental study on the globe thermometer behaviour in conditions of asymmetry of the radiant temperature
546
Experimental study on the grinding rate constant of solid materials in a ball mill
547
Experimental study on the hazards of the jet diffusion flame of liquefied dimethyl ether
548
Experimental study on the heat and mass transfer characteristics in a refrigerated truck
549
Experimental study on the heat recovery characteristics of a new-type flat micro-heat pipe array heat exchanger using nanofluid
550
Experimental study on the heat transfer at the heat exchanger of the thermoacoustic refrigerating system
551
Experimental study on the heat transfer characteristics during the pressure transients under supercritical pressures
552
Experimental study on the heat transfer characteristics of nanorefrigerants in an internal thread copper tube
553
Experimental study on the heat transfer enhancement of MWNT-water nanofluid in a shell and tube heat exchanger
554
Experimental study on the heat transfer under impinging elliptic jet array along a film hole surface using liquid crystal thermograph
555
Experimental study on the hung-up regime in hopper–standpipe systems for Geldart-A powders
556
Experimental study on the hung-up regime of a hopper-standpipe system for a Geldart-D powder
557
Experimental study on the hydrate dissociation in porous media by five-spot thermal huff and puff method
558
Experimental study on the hydrodynamic effects of gas permeation through horizontal membrane tubes in fluidized beds
559
Experimental study on the hydrogen charge and discharge rates of metal hydride tanks using heat pipes to enhance heat transfer
560
Experimental study on the identification of dynamic axle loads of moving vehicles from the bending moments of bridges
561
Experimental study on the impact fragmentation of core–mantle bodies: Implications for collisional disruption of rocky planetesimals with sintered core covered with porous mantle
562
Experimental study on the impact of dinoflagellate Alexandrium species on populations of the rotifer Brachionus plicatilis
563
Experimental study on the improvement of CO2 air conditioning system performance using an ejector
564
Experimental study on the influence of alkaline earth promoters on neodymium oxide performance in the oxidative coupling of methane Original Research Article
565
Experimental study on the influence of bed material on the scaling of solids circulation patterns in 3D bubbling gas–solid fluidized beds of glass and polyethylene using positron emission particle tracking
566
Experimental study on the influence of overload induced residual stress field on fatigue crack growth in aluminium alloy
567
Experimental study on the influence of the thermal input on the reaction zone under flameless oxidation conditions
568
Experimental study on the influence of water temperature on the otolith formation of the marbled flounder (Pseudopleuronectes yokohamae)
569
Experimental Study on the Influencing Factors of Treatment of Landfill Sludge Using Vacuum Preloading with the Fenton Reagent
570
Experimental study on the instantaneous fluid force acting on two circular cylinders closely arranged in tandem
571
Experimental study on the interaction between large scale vortices and particles in liquid–solid two-phase flow
572
Experimental study on the interaction of two two-dimensional circular holes placed in a uniform viscous flow in a porous medium
573
Experimental study on the kinetics of water vapor sorption on selective water sorbents, silica gel and alumina under typical operating conditions of sorption heat pumps
574
Experimental study on the laminar flame speed of hydrogen/carbon monoxide/air mixtures
575
Experimental study on the local convective coefficient distribution on a pipe surface with inclined fins
576
Experimental study on the loop heat pipe with a planar bifacial wick structure
577
Experimental study on the low temperature regenerator packed with rectification meshes Original Research Article
578
Experimental study on the low velocity impact responses of all-composite pyramidal truss core sandwich panel after high temperature exposure
579
Experimental study on the machining of a shaped hole in Ni-based super-heat-resistant alloy
580
Experimental study on the magnetic convection in a vertical cylinder
581
Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals
582
Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature
583
Experimental study on the mechanical properties of clayey soil under di erent freezing apparatustemperatures and freeze-thaw cycles
584
Experimental study on the mechanism of BaTiO3-based PTC–CO gas sensor
585
Experimental study on the microstructure and nanomechanical properties of the wing membrane of dragonfly
586
Experimental study on the milling of a Ti Beta 21S
587
Experimental study on the milling of thin parts of titanium alloy (TC4)
588
Experimental study on the natural circulation of a passive residual heat removal system for an integral reactor following a safety related event
589
Experimental study on the noise reduction of an industrial forward-curved blades centrifugal fan
590
Experimental study on the nozzle effect of the pulse cleaning for the ceramic filter candle
591
Experimental study on the number density distribution function in turbulent bubbly flows with coalescence and break-up
592
Experimental study on the onset of local dryout in an evaporating falling film on horizontal plain tubes
593
Experimental study on the operating characteristics of a capillary pumped loop with a flat evaporator
594
Experimental study on the operating characteristics of a flat bifacial evaporator loop heat pipe
595
Experimental study on the operating characteristics of a novel low-concentrating solar photovoltaic/thermal integrated heat pump water heating system
596
Experimental study on the optimum flow rate and pressure for selective cerebral perfusion
597
Experimental study on the oxidation of nuclear graphite and development of an oxidation model
598
Experimental study on the packing of uniform spheres under three-dimensional vibration
599
Experimental study on the pathogenicity of avian influenza A/Ch/It/5093/99(H7N1) virus in chicken
600
Experimental study on the pathogenicity of avian influenza A/Ch/It/5093/99(H7N1) virus in chicken
601
Experimental study on the performance of a heat pump system with refrigerant mixtures’ composition change
602
Experimental study on the performance of a mechanical cooling tower fitted with different types of water distribution systems and drift eliminators
603
Experimental study on the performance of a novel fin-tube air heat exchanger with punched longitudinal vortex generator
604
Experimental study on the performance of a novel structure for two-phase flow distribution in parallel vertical channels
605
Experimental study on the performance of a room temperature magnetic refrigerator using permanent magnets
606
Experimental study on the performance of a simultaneous heating and cooling multi-heat pump with the variation of operation mode
607
Experimental study on the performance of a solar driven steam jet ejector chiller
608
Experimental study on the performance of a THGEM detector for X-rays
609
Experimental study on the performance of an aircraft environmental control system
610
Experimental study on the performance of an inverter heat pump with a bypass orifice
611
Experimental study on the performance of CO2 residential air-conditioning system with an internal heat exchanger
612
Experimental study on the performance of double-effect and double-way thermochemical sorption refrigeration cycle
613
Experimental study on the performance of hydrogen production from miniature methanol–steam reformer integrated with Swiss-roll type combustor for PEMFC
614
Experimental study on the performance of mechanical cooling tower with two types of film packing
615
Experimental study on the performance of PEM fuel cells with interdigitated flow channels
616
Experimental study on the performance of recooling cycle of hydrocarbon fueled scramjet engine
617
Experimental study on the performance of solar Rankine system using supercritical CO2
618
Experimental study on the performance of superfinish hard turned surfaces in rolling contact
619
Experimental study on the performance of the thermoacoustic refrigerating system
620
Experimental study on the performance of woven fabric rubber composite armor subjected to shaped charge jet impact
621
Experimental study on the phase change behavior of phase change material confined in pores
622
Experimental study on the phase equilibria of the Ag–Ti system
623
Experimental Study on the Physical and Rheological Properties of Bitumen Modified with Different Nano Materials (Nano SiO2 & Nano TiO2)
624
Experimental study on the plastic deformation and densification characteristics of some sintered and heat treated low alloy powder metallurgy steels
625
Experimental study on the pool boiling CHF enhancement using magnetite-water nanofluids
626
Experimental study on the pore structure characteristics of the Upper Ordovician Wufeng Formation shale in the southwest portion of the Sichuan Basin, China
627
EXPERIMENTAL STUDY ON THE POTENTIAL USE OF PUMICE BRECCIA AS COARSE AGGREGATE IN STRUCTURAL LIGHTWEIGHT CONCRETE
628
Experimental study on the PRE-X vehicle focusing on the transitional shock-wave/boundary-layer interactions
629
Experimental Study on the Production of CO-NO-HC Emissions in the Radial Swirling Flow Combustion System
630
Experimental study on the production of light nuclei in spallation–fission reactions and projectile fragmentation of 238U Original Research Article
631
Experimental study on the pseudobinary H2O + NaAlSi3O8 at 600–800 °C and 0.3–2.4 GPa
632
Experimental study on the purification of HIx phase in the iodine–sulfur thermochemical hydrogen production process
633
Experimental study on the reaction between nuclear graphite IG-110 and carbon dioxide
634
Experimental study on the removal of PAHs using in-duct activated carbon injection
635
Experimental study on the removal of phenol from wastewater using Ni-doped ZIF-8 adsorbent; Isotherm models and operating conditions
636
Experimental study on the rheological properties of polycrystalline solid nitrogen and methane: Implications for tectonic processes on Triton
637
Experimental study on the rheology of CO2 viscoelastic surfactant foam fracturing fluid
638
Experimental study on the role of clays as sealing materials in the geological storage of carbon dioxide
639
Experimental study on the role of osteoclasts and free radicals in the mandibular invasion of VX2 carcinoma in Japanese white rabbits
640
Experimental study on the safety of a new connecting device
641
Experimental study on the separation of CO2 from flue gas using hollow fiber membrane contactors without wetting
642
Experimental study on the shape–velocity relationship of an ellipsoidal bubble in inorganic salt solutions
643
Experimental Study on the Shearing Behavior of Saturated Silty Soils Based on Ring-Shear Tests
644
Experimental study on the size distribution characteristics of spray droplets of DME/diesel blended fuels
645
Experimental study on the solid velocity in horizontal dilute phase pneumatic conveying of fine powders
646
Experimental study on the solubility of natural gas components in water with or without hydrate inhibitor
647
Experimental Study on the Solvation Behavior in Aqueous Choline Chloride-based Deep Eutectic Solutions by Solvatochromic Dyes
648
Experimental study on the stability of asphalt emulsion for CA mortar by laser diffraction technique
649
Experimental Study on the Stability of Concrete Block Revetment for High Waves Propagating over Submerged Geotube Breakwater
650
Experimental study on the stability of the foamy oil in developing heavy oil reservoirs
651
Experimental study on the stitching reinforcement of composite laminates with a circular hole
652
Experimental study on the strength and ductility of steel tubular columns filled with steel-reinforced concrete
653
Experimental study on the structural behavior of concrete dapped-end beams
654
Experimental study on the structure and vibrational, thermal and dielectric properties of bis(2-methylanilinium) selenate accomplished with DFT calculation
655
Experimental study on the structure of opposed flow gaseous diffusion flames doped with n-decane
656
Experimental study on the surface characteristics of polymer melts
657
Experimental Study on the Surface Modification by Electrical Discharge Process
658
Experimental study on the surface stress measurement with Rayleigh wave detection technique
659
Experimental study on the swelling behaviour of bentonite/claystone mixture
660
Experimental study on the tensile strength of a sintered porous metal composite
661
Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy
662
Experimental Study on the Thermal Conductivity and Viscosity of a Transformer Oil-based Nanofluid Containing ZnO Nanoparticles
663
Experimental study on the thermal decomposition of 2H-heptafluoropropane
664
Experimental study on the thermal decomposition of 2H-heptafluoropropane
665
Experimental study on the thermal oxidation of 1,3-hexachlorobutadiene at 500 – 1100° C
666
Experimental study on the thermal oxidation of 2-chlorophenol in air over the temperature range 450–900 °C
667
Experimental study on the thermal oxidation of chlorobenzene at 575–825°C
668
Experimental study on the thermal performance and efficiency of a copper made thermosyphon heat pipe charged with alumina–glycol based nanofluids
669
Experimental study on the thermal performance of a mechanical cooling tower with different drift eliminators
670
Experimental study on the thermal performance of mechanical cooling tower with rotational splash type packing
671
Experimental study on the thermal performance of vertical closed-loop oscillating heat pipes and correlation modeling
672
Experimental study on the thermal properties of the phase change material wall formed by different methods
673
Experimental study on the thermal storage performance and preparation of paraffin mixtures used in the phase change wall
674
Experimental study on the thermodynamics of the Cu–Sb–Sn liquid alloys
675
Experimental study on the thermodynamics of the Cu–Sb–Sn liquid alloys
676
Experimental study on the transition between stratified and non-stratified horizontal oil–water flow
677
Experimental Study on the Transmission of Measurements by Tolerance in SCADA Systems
678
Experimental study on the treatment of intracerebral glioma xenograft with human cytokine-induced killer cells
679
Experimental study on the turbulent boundary layer flow over riblets surface
680
Experimental study on the ultimate bending resistance of steel tub girders with top lateral bracing
681
Experimental study on the ultrasonic nonlinear damage characteristics of expansive soil during constant amplitude dry-wet cycles
682
Experimental study on the unconfined compression of a thawing soil
683
Experimental study on the unintentional abiotic methylation of inorganic mercury during analysis: Part 1: Localisation of the compounds effecting the abiotic mercury methylation
684
Experimental study on the unintentional abiotic methylation of inorganic mercury during analysis: Part 2: Controlled laboratory experiments to elucidate the mechanism and critical discussion of the species specific isotope addition correction method
685
Experimental study on the unique stability mechanism via miniaturization of jet diffusion flames (microflame) by utilizing preheated air system
686
Experimental study on the unsteady laminar heat transfer downstream of a backwards facing step
687
EXPERIMENTAL STUDY ON THE UPSTREAM WATER LEVEL RISE AND DOWNSTREAM SCOUR LENGTH OF A SUBMERGED DAM  
688
Experimental Study on the Use of Cobalt-60 Irradiation in the Inactivation of Giardia lamblia Cyst
689
Experimental study on the vertical deformation of sand caused by cyclic withdrawal and recharging of groundwater
690
EXPERIMENTAL STUDY ON THE VORTEX-INDUCED VIBRATION OF TOWED PIPES
691
Experimental study on the wake behind tapered circular cylinders
692
Experimental study on the water impact of a symmetrical wedge
693
Experimental Study on the Wear of Liner in Tumbling Mill under Dry and Wet Conditions
694
Experimental study on the whip elimination of rotor-bearing systems with electromagnetic exciters
695
Experimental study on the wind-induced vibration of a dry inclined cable—Part I: Phenomena
696
Experimental study on the wind-induced vibration of a dry inclined cable—Part II: Proposed mechanisms
697
Experimental study on thermal and mechanical behavior of polypropylene, talc/polypropylene and polypropylene/clay nanocomposites
698
Experimental study on thermal characteristics of ammonia flow boiling in a plate evaporator at low mass flux
699
Experimental study on thermal characteristics of suspended platinum nanofilm sensors
700
Experimental study on thermal comfort of sleeping people at different air temperatures
701
Experimental study on thermal conductivity of polyurethane resin filled with modified nanoparticles
702
Experimental study on thermal efficiency and emission characteristics of a lean burn hydrogen enriched natural gas engine
703
Experimental study on thermal performance of a solar chimney combined with PCM
704
Experimental study on thermal–hydraulic performance of a wavy fin-and-flat tube aluminum heat exchanger
705
Experimental study on thermally actuated pressure wave generator for space cryocooler Original Research Article
706
Experimental Study on Thermo, Water Quality and Economic Analysis of Hemispherical Solar Still Using Different Basin Materials with and without Internal Reflector
707
Experimental study on thermocapillary convection
708
Experimental study on thermo-chemical phenomena during interaction of limestone concrete with liquid sodium under inert atmosphere
709
Experimental study on thermo-mechanical properties of Polymer Modified Mortar
710
Experimental study on thermophoretic deposition of soot particles in laminar diffusion flames along a solid wall in microgravity
711
Experimental study on thermophysical properties of nanofluids as phase-change material (PCM) in low temperature cool storage
712
Experimental study on thermosyphon solar water heater in Bahrain
713
Experimental Study on Three-Dimensional Bubble Rising Behaviours by Virtual Stereo Vision
714
Experimental study on three-dimensional temperature fluctuation caused by coaxial-jet flows
715
Experimental Study on Time Evolution of Shock Wave and Turbulent Boundary Layer Interactions
716
Experimental study on time evolution of Marangoni flow instability in molten silicon bridge
717
Experimental study on titanium heat exchanger used in a gas fired water heater for latent heat recovery
718
Experimental study on transition of flow pattern and phase distribution in upward air–water two-phase flow along a large vertical pipe
719
Experimental study on transmission of an overdriven detonation wave from propane/oxygen to propane/air
720
Experimental study on treatment of electroplating wastewater by nanofiltration
721
Experimental study on turbulent features in the negative transport region of asymmetric plane channel flow
722
Experimental study on turbulent mixing process in cross-flow type T-junction
723
EXPERIMENTAL STUDY ON TURNING WITH SELF-PROPELLED ROTARY CUTTING TOOL
724
Experimental study on two-phase flow and pressure drop in millimeter-size channels
725
Experimental study on two-phase natural circulation and flow termination in a loop Original Research Article
726
Experimental study on two-photon oscillator strength of hydrogenic yellow excitons in Cu2O
727
Experimental study on two-stage catalytic hydroprocessing of middle-temperature coal tar to clean liquid fuels
728
Experimental study on two-stage compression refrigeration/heat pump system with dual-cylinder rolling piston compressor
729
Experimental study on ultimate strength of CK20 steel cylindrical panels subjected to compressive axial load
730
Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools
731
Experimental Study on Uniaxial and Multiaxial Strain Cyclic Characteristics and Ratcheting of 316L Stainless Steel
732
Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures Original Research Article
733
Experimental study on unsteady wake impacting effect in axial-flow compressors
734
Experimental study on urban refuse/magnesium oxychloride cement compound floor tile
735
Experimental study on using ionic liquids to upgrade heavy oil
736
Experimental Study on Using Uniform Tuned Liquid Column Damper for Structural Control of Buildings Resting on Loose Soil
737
Experimental study on ventilation characteristics of a concrete-sphere layer and a crushed-rock layer
738
Experimental study on vertical vapor absorption into LiBr solution with and without additive
739
Experimental study on vibration and damping of curved panel treated with constrained viscoelastic layer
740
Experimental study on vibrations of a nonwoven fabric cylindrical filter
741
Experimental study on viscosity reduction of Iranian heavy export crude oil by using imidazolium based ionic liquids supported on ZIF-8 organic framework
742
Experimental study on visibility of exit signs in buildings
743
Experimental Study on Wake Characteristics of Secondary Grooved Cylinders with Different Depths
744
Experimental Study on Warm Incremental Tube Forming of AA6063 Aluminum Tubes
745
Experimental Study on Wastewater Application for Cement Mixing in Concrete
746
Experimental study on water–rock interactions during CO2 flooding in the Tensleep Formation, Wyoming, USA
747
Experimental study on water-wing characteristics induced by piers in ood drainage culverts
748
Experimental Study on Wave Transmission and Reflection at Impermeable Submerged Breakwaters
749
Experimental study on wear and friction of work roll material with 4% Cr and added Ti in cold rolling
750
Experimental study on whirling, flying and tilting motions of a 3.5 in. FDB spindle system
751
Experimental Study on Wind Load and Wind-Induced Interference Effect of Three High-Rise Buildings
752
Experimental study on wind loading on a complicated group-tower
753
Experimental study on wind loading on a complicated group-tower
754
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics
755
Experimental study on zeta potential and streaming potential of advanced ceramic powders
756
Experimental study on z-pin bridging law by pullout test
757
Experimental study to accumulate, accelerate and focus a massive plasma beam onto a target
758
Experimental study to control the insertion resistance of internal medical instrument using magnetic field oscillation
759
Experimental Study to Evaluate Antisymmetric Reinforced Concrete Deep Beams with Openings under Concentrated Loading Using Strut and Tie Model
760
Experimental study to evaluate the pathogenicity of Streptococcus iniae in Guppy (Poecilia reticulata)
761
Experimental Study to Investigate Effect of Pitch Ratio and Number of Blades on Hydrodynamic Performance of Surface Piercing Propellers
762
Experimental study to investigate mechanical properties of new material polyurethane–cement composite (PUC)
763
Experimental study to investigate the effects of fibre and protein on appetite feelings and food intake in women
764
Experimental study to investigate the impact of a patented fibre complex containing CM3 alginate (Biogenate complexTM; APPEsatTM) on food intake and appetite ratings in women
765
Experimental study to investigate the impact of a patented herb extract formulation Yerbe Maté, Guarana and Damiana (YGD; Zotrim®) on food intake and appetite ratings in women
766
Experimental Study to Optimize Shrinkage Behavior of Semi-Crystalline and Amorphous Thermoplastics
767
Experimental study to reduce the distribution-transformers stray losses using electromagnetic shields
768
Experimental study with a Digital Image Correlation (DIC) method and numerical simulation of an anisotropic elastic-plastic commercially pure titanium
769
Experimental study, on strain rate sensitivity of ductile porous irons
770
Experimental study, via current–potential curves, of the anodic behavior of Alloy C-276 and T60 titanium in chlorinated and oxygenated aqueous media under sub- to supercritical conditions
771
Experimental studying and stochastic modeling of residence time distribution in jet-entrained gasifier
772
Experimental studying of a small combined cold and power system driven by a micro gas turbine
773
Experimental studying of buckling of stringer cylindrical shells under axial compression
774
Experimental studying of pore morphology and wettability effects on microscopic and macroscopic displacement efficiency of polymer flooding
775
Experimental Studying of the Effect of EGR Distribution on the Combustion, Emissions and Perforemance in a Turbocharged DI Diesel Engine
776
Experimental studying the effect of nano particles additives in dieselbiodiesel blends on the emission characteristics of a CI engine
777
Experimental subchronic mycotoxicoses in mice: individual and combined effects of dietary exposure to fumonisins and aflatoxin B1
778
Experimental summary on global observables, hadron spectra and ratios Original Research Article
779
Experimental supplemental vein grafting and hypoperfusion syndrome
780
Experimental support differenciating two proposed chiral recognition models for the resolution of N-(3,5-Dinitrobenzoyl)-α-arylalkylamines on high-performance liquid chromatography chiral stationary phases
781
Experimental support for a model-based prediction of tool wear
782
Experimental surface tensions and derived surface activities of the nitrobenzene-fused tetra-n-butyl ammonium picrate system from 364.1 to 393.1 K over full composition range
783
Experimental survey of temperature, time and cross‑linking agent effects on polydimethylsiloxane composite membranes performances in sulfur removal
784
Experimental survey of the chemical durability of commercial soda-lime-silicate glasses
785
Experimental Survey on Microwave Drying of Porous Media
786
Experimental survey on the combination of radiating infrared and microwave sources for the drying of porous material
787
Experimental Survey Roterdam Demand System By Using Urban Family Of Consumer Costs Data Case Study: Province Of Sistan and Balouchestan, Iran
788
Experimental switching of copper status in laboratory rodents
789
Experimental syntheses of framboids—a review
790
Experimental synthesis and phase relations of phengitic muscovite from 6.5 to 11 GPa in a calcareous metapelite from the Dabie Mountains, China
791
Experimental system for high resolution X-ray transmission radiography
792
Experimental system for high resolution X-ray transmission radiography
793
Experimental system for X-ray magnetic diffraction under extreme conditions Original Research Article
794
Experimental System Identification and Signal Processing of V94.2 Gas Turbine Fuel System
795
Experimental system of cavitation erosion with water-jet
796
Experimental T33-stress formulation of test specimen thickness effect on fracture toughness in the transition temperature region
797
Experimental taphonomy of a decapod crustacean: Long-term data and their implications
798
Experimental technique for launching miniature flying plates using laser pulses
799
Experimental technique to analyse the slurry erosion wear due to turbulenc
800
Experimental technique to determine unsteady flow in natural ventilation stacks at model scale
801
Experimental Techniques Addressing Product Quality Series: Part 3. THE POWER OF TWO… 2K FACTORIAL EXPERIMENTS
802
Experimental Techniques Addressing Product Quality Series: Part 4. PARING-BY-PAIRING … ALIASING AND 2k-p FRACTIONAL FACTORIAL ANOVA
803
Experimental Techniques Addressing Product Quality Series: Part 5. NEW SIGNIFICANCE INDICATORS AID ANOVA
804
Experimental techniques and design in composite materials (ETDCM8)
805
Experimental techniques for determining heat and mass transfer due to condensation of humid air in cooled, open cavities
806
Experimental techniques for fracture instability toughness determination of unidirectional fibre metal laminates
807
Experimental techniques for investigating the surface oxygen formation in the N2O decomposition on Fe-MFI zeolites
808
EXPERIMENTAL TECHNIQUES FOR MEASURING SEWING NEEDLE TEMPERATURE
809
Experimental techniques for quantifying the cake mass, the cake and membrane resistances and the specific cake resistance during crossflow filtration of microbial suspensions
810
Experimental techniques for single cell and single molecule biomechanics
811
Experimental techniques for studying the structure of foams and froths
812
Experimental techniques for the investigation of the electron screening effect for d+d fusion reactions in metallic environments Original Research Article
813
Experimental techniques in natural convection
814
EXPERIMENTAL TECHNIQUES TO UNDERSCORE A CONCRETE VICTORY
815
Experimental Techniques/Scattering
816
Experimental tectonics: from Sir James Hall to the present
817
Experimental temperature measurements for the energy amplifier test
818
Experimental temperature measurements for the energy amplifier test
819
Experimental tensiometric protein adsorption studies
820
Experimental test campaign on an ITER divertor mock-up
821
Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra high performance fibre reinforced concrete (UHPFRC)
822
Experimental test of a load model in the presence of harmonics
823
Experimental test of a new technique of background suppression in digital mammography
824
Experimental test of a new technique of background suppression in digital mammography
825
Experimental test of a novel multi-surface trough solar concentrator for air heating
826
Experimental Test of a Perturbation Model for Time-Resolved Imaging in Diffusive Media
827
Experimental test of a radiative transfer model of the optical effects of space weathering
828
Experimental test of a supercritical helium heat exchanger dedicated to EUROTRANS 150 kW CW power coupler Review Article
829
Experimental test of blind tip reconstruction for scanning probe microscopy
830
Experimental test of blind tip reconstruction for scanning probe microscopy
831
Experimental test of structural materials activation in the IFMIF neutron spectrum
832
Experimental test of the “zero dead time” count-loss correction method on a digital gamma-ray spectrometer
833
Experimental test of the “zero dead time” count-loss correction method on a digital gamma-ray spectrometer
834
Experimental test of the background rejection, through imaging capability, of a highly segmented AGATA germanium detector
835
Experimental test of the background rejection, through imaging capability, of a highly segmented AGATA germanium detector
836
Experimental test of the Gallavotti–Cohen fluctuation theorem in turbulent flows
837
Experimental test of the hybrid superconducting pixel detector principle
838
Experimental test of the hybrid superconducting pixel detector principle
839
Experimental test of the polarization direction correlation method (PDCO)
840
Experimental test of the polarization direction correlation method (PDCO)
841
Experimental test of the probability density function of true value of Poisson distribution parameter by single observation of number of events
842
Experimental test of the probability density function of true value of Poisson distribution parameter by single observation of number of events
843
Experimental test of the prospect theory value function: A stochastic dominance approach
844
Experimental test of the time stability of the half-life of alpha-decay 214Po nuclei
845
Experimental test of TOYOBO membranes for seawater desalination at Las Palmas, Spain
846
Experimental test on a novel dual fluidised bed biomass gasifier for synthetic fuel production
847
Experimental test on Carbon Crystal Panel system and simulation research on its partial-heating program
848
Experimental test procedures for determination of the optical efficiency factor of a parabolloid concentrator solar cooker
849
Experimental test results for a parallel transmission lines protection scheme using wavelet transform
850
Experimental test to validate the rate equation “dα/dt = kf(α)” used in the kinetic analysis of solid state reactions
851
Experimental test with polymeric membrane for the biogas purification from CO2 and H2S
852
Experimental Testicular Torsion in a Rat Model: Effects of Treatment with Pausinystalia macroceras on Testis Functions
853
Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression
854
Experimental testing and FEM simulation for thermal imprinting of micro/nano glass-optical devices
855
Experimental testing and modeling of a tethered spherical aerostat in an outdoor environment
856
Experimental testing and modelling of an industrial insulated pipeline for deep sea application
857
Experimental testing and numerical modeling of soil-filled concertainer walls
858
Experimental testing and simulation of bolted beam-column connections having thick extended endplates and multiple bolts per row
859
Experimental testing and thermal analysis of ball bearings
860
Experimental testing of a box-type solar cooker using the standard procedure of cooking power
861
Experimental testing of a lab-scale adsorption chiller using a novel selective water sorbent “silica modified by calcium nitrate”
862
Experimental testing of a neural network based digital differential relay for synchronous generators
863
Experimental testing of a new algorithm for measurement of trabecular orientation
864
Experimental testing of a new anti-seismic dissipator energy device based on the plasticity of metals
865
Experimental testing of a shallow solar pond with continuous heat extraction
866
Experimental testing of a stochastic sediment transport model
867
Experimental testing of an annular denuder and filter system to measure gas–particle partitioning of semivolatile bifunctional carbonyls in the atmosphere
868
Experimental testing of an off-road instrumented tire on soft soil
869
Experimental testing of an oil-flooded hermetic scroll compressor
870
Experimental testing of BMI laminates with stress concentrations and the evaluation of SIFT to predict failure
871
Experimental testing of cool colored thin layer asphalt and estimation of its potential to improve the urban microclimate
872
Experimental testing of correlations to calculate the atmospheric ‘‘transparency window’’ emissivity coefficient
873
Experimental testing of flexible recipe control based on a hybrid model
874
Experimental testing of joints for seismic design of lightweight structures. Part 1. Screwed joints in straps
875
Experimental testing of joints for seismic design of lightweight structures. Part 2: Bolted joints in straps
876
Experimental testing of joints for seismic design of lightweight structures. Part 3: Gussets, corner joints, x-braced frames
877
Experimental testing of journal bearings with two-component surface layer in the presence of an oil abrasive contaminant
878
Experimental testing of models for the estimation of hourly solar radiation on vertical surfaces at Arcavacata di Rende
879
Experimental Testing Of Rice Husk Ash Concrete Beams
880
Experimental testing of rust fungus-mediated herbivory resistance in Betula pendula
881
Experimental testing of tall reinforced masonry walls under out-of-plane actions
882
Experimental testing of the artificial neural network based protection of power transformers
883
Experimental testing of the durability of lime-based mortars used for rendering historic buildings
884
Experimental testing on free vibration behaviour for silicone rubbers proposed within lumbar disc prosthesis
885
Experimental tests and analytical model of high damping rubber dissipating devices
886
Experimental tests and modeling of the optimal orifice size for a closed cycle 4He sorption refrigerator Original Research Article
887
Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips
888
Experimental tests and numerical modeling of reinforced masonry arches
889
Experimental tests and numerical modelling of wall sandwich panels
890
Experimental tests and numerical simulation studies on nano-indentation of TiN film deposited on N+-implanted aluminum
891
Experimental tests and thermo-mechanical analyses on the HEXCALIBER mock-up
892
Experimental tests concerning the impact resistance of a tailplane
893
Experimental tests for the application of an analytical model for flexible debris flow barrier design
894
Experimental tests of a hybrid pixellated detector for gamma imaging
895
Experimental tests of a hybrid pixellated detector for gamma imaging
896
Experimental tests of a nano-DMA with no voltage change between aerosol inlet and outlet slits
897
Experimental tests of an air-cooling hydrogen fuel cell hybrid electric scooter
898
Experimental tests of asymptotic freedom
899
Experimental tests of blends of hydrogen and natural gas in light-duty vehicles
900
Experimental tests of Chiral Perturbation Theory
901
Experimental tests of dead-time corrections
902
Experimental tests of dead-time corrections
903
Experimental tests of different types of bolted steel beam–column joints under a central-column-removal scenario
904
Experimental tests of dropwise cooling on infrared-transparent media
905
Experimental tests of EEG source localization accuracy in realistically shaped head models
906
Experimental tests of EEG source localization accuracy in spherical head models
907
Experimental tests of low degree peridotite partial melt compositions: implications for the nature of anhydrous near-solidus peridotite melts at 1 GPa
908
Experimental Tests of Middle Palaeolithic Spear Points Using a Calibrated Crossbow
909
Experimental tests of neutron shielding for the ATLAS forward region
910
Experimental tests of neutron shielding for the ATLAS forward region
911
Experimental tests of scaling predictions of the spatial distribution of particles during the drying of colloidal films
912
Experimental tests of sex-allocation theory in plants
913
Experimental tests of slender reinforced concrete columns under combined axial load and lateral force
914
Experimental tests of stability and load carrying capacity of compressed thin-walled multi-cell columns of triangular cross-section
915
Experimental tests of stereological estimates of grain boundary populations Original Research Article
916
Experimental tests of the endowment effect
917
Experimental tests of the injection Y on the University of Maryland Electron Ring
918
Experimental tests of the injection Y on the University of Maryland Electron Ring
919
Experimental tests of the new plastic scintillator with pulse shape discrimination capabilities EJ-299-33
920
Experimental tests of the new plastic scintillator with pulse shape discrimination capabilities EJ-299-33
921
Experimental tests of the Somatic Marker hypothesis
922
Experimental tests of the strong interaction and its energy dependence in electron–positron annihilation
923
Experimental tests of the strong interaction and its energy dependence in electron–positron annihilation
924
Experimental tests of the trigger prototype for the AMADEUS experiment based on Sci-Fi read by MPPC
925
Experimental tests of the trigger prototype for the AMADEUS experiment based on Sci-Fi read by MPPC
926
Experimental tests of transport models using modulated electron cyclotron heating
927
Experimental Tests of Villin Subdomain Folding Simulations
928
Experimental Tests on Cement Mortars Manufactured with Hemp Flour
929
Experimental tests on existing RC beams strengthened in flexure and retrofitted for shear by C‑FRP in presence of negative moments
930
Experimental tests on GFRP truss modules for dismountable bridges
931
Experimental tests on Li-ceramic breeders for the helium cooled pebble bed (HCPB) blanket design
932
Experimental tests on pure aluminium shear panels with welded stiffeners
933
Experimental tests on pure aluminium shear panels with welded stiffeners
934
Experimental tests on reinforced concrete columns under biaxial quasi-static loading
935
Experimental tests on reinforced concrete columns under multi-dimensional dynamic loadings
936
Experimental tests on retrofitted RC beam-column joints underdesigned to seismic loads. General approach
937
Experimental tests on seismically damaged composite steel concrete walls retrofitted with CFRP composites
938
Experimental tests on steam reforming of natural gas in a reformer and membrane modules (RMM) plant
939
Experimental tests on typical screw connections for cold-formed steel housing
940
Experimental tests to validate the rate-limiting step assumption used in the kinetic analysis of solid-state reactions
941
Experimental tests with MISANS (Modulated Intensity Small Angle Neutron Scattering) at IPNS (Intense Pulsed Neutron Source)
942
Experimental tests with MISANS (Modulated Intensity Small Angle Neutron Scattering) at IPNS (Intense Pulsed Neutron Source)
943
Experimental theory, fundamentals and mathematical evaluation of phosphate diffusion in meats Original Research Article
944
Experimental therapeutic studies of Solanum aculeastrum Dunal. on Leishmania major infection in BALB/c mice
945
Experimental thermal behavior of a power plant reheater
946
Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls
947
Experimental thermal conductivity of ethylene glycol and water mixture based low volume concentration of Al2O3 and CuO nanofluids
948
Experimental thermal performance evaluation of a horizontal ground-source heat pump system
949
Experimental thermal performance of a solar source heat-pump system for residential heating in cold climate region
950
Experimental thermal performance study of an inclined heat pipe heat exchanger operating in high humid tropical HVAC systems
951
Experimental thermal properties characterization of insulating cork–gypsum composite
952
Experimental thermal study of a solar wall of composite type
953
Experimental thermal–hydraulic evaluation of constructal microfluidic structures under fully constrained conditions
954
Experimental thermal–hydraulic evaluation of CuO nanofluids in microchannels at various concentrations with and without suspension enhancers
955
Experimental thermochemical study of two polymethylpyrazine N,N′-dioxide derivatives
956
Experimental thermodynamic cycles and performance analysis of a solar-powered adsorptive icemaker in hot humid climate
957
Experimental thermodynamic evaluation for a single stage heat transformer prototype build with commercial PHEs
958
Experimental thermodynamic study of intermetallic phases in the binary Ag–Te system by an improved EMF method
959
Experimental thermodynamic study of the equilibrium phase AgBi3S5 by an improved EMF method
960
Experimental thermodynamics for the evaluation of ALD growth processes
961
Experimental thermomechanic study of Newtonian and non-Newtonian suspension flows
962
Experimental tight-binding parameterization of the oxygen-metal interaction: application to the Rh(1 1 0)(2 × 2)p2mg-O surface
963
Experimental time saving in NMR measurement of time dependent diffusion coefficients
964
Experimental to study the effect of multiple weld-repairs on microstructure, hardness and residual stress for a stainless steel clad plate
965
Experimental tokamak reactor concept design for fusion-fusion hybrid reactor and volumetric neutron source
966
Experimental Tongue Carcinogenesis Induced by 4-Nitroquinoline 1-Oxide in Wistar Rats: A Suitable Tool for Understanding Oral Cancer Pathogenesis: a Review
967
Experimental torsional shear properties of carbon fiber reinforced epoxy composites containing carbon nanotubes
968
Experimental tour-based travel demand models
969
Experimental toxicity and bioaccumulation of cadmium in freshwater periphytic diatoms in relation with biofilm maturity Original Research Article
970
Experimental toxocariosis in BALB/c mice: Effect of the inoculation dose on brain and eye involvement
971
Experimental Toxoplasmosis in White Turkeys
972
Experimental tracheal reconstruction with a rotated right stem bronchus
973
Experimental tracking of silica dispersion into silicone polymer
974
Experimental transfer function for a low-pressure differential mobility analyzer by use of a monodisperse C60 monomer
975
Experimental transformation of Na,Ca-smectite under basic conditions at 150 °C
976
Experimental transient natural convection heat transfer from a vertical cylindrical tank
977
Experimental transient performance of a heat pump equipped with a distillation column
978
Experimental transition probabilities and Stark shifts in O III and O IV spectra
979
Experimental transition state for the B-chlorodiisopinocampheylborane (DIP-Cl) reduction
980
Experimental transition state for the Corey–Bakshi–Shibata reduction
981
Experimental translocation of the endangered shrub Apalachicola rosemary Conradina glabra to the Apalachicola Bluffs and Ravines Preserve, Florida Original Research Article
982
Experimental transmission of malacosporean parasites from bryozoans to common carp (Cyprinus carpio) and minnow (Phoxinus phoxinus)
983
Experimental transplanting of Posidonia australis seagrass in Port Hacking, Australia, to assess the feasibility of restoration
984
Experimental transport-rate budgets in complex 3-D turbulent flow near a wing/body junction
985
Experimental treatment may show promise for vCJD
986
Experimental Treatment of a Suspected Case of Mycetoma Based on Dot-in-Circle Sign
987
Experimental treatment of early stuttering: A preliminary study
988
Experimental treatment of recurrent otitis externa
989
Experimental treatments for acute ischaemic stroke
990
Experimental treatments for mitochondrial dysfunction in sepsis: A narrative review
991
Experimental trends in polymer nanocomposites—a review
992
Experimental trends in polymer nanocomposites—a review
993
Experimental trends of NO in circulating fluidized bed combustion
994
Experimental trials to make wheat straw pellets with wood residue and binders
995
Experimental Tribulus terrestris poisoning in goats
996
Experimental Tricyclic Antidepressant Toxicity: A Randomized, Controlled Comparison of Hypertonic Saline Solution, Sodium Bicarbonate, and Hyperventilation, ,
997
Experimental Trypanosoma evansi infection in South American coati (Nasua nasua): hematological, biochemical and histopathological changes
998
Experimental tudie of indocyanine green dye–enhanced photocoagulation of choroidal neovacularization feeder veel
999
Experimental tudy of an automated ytem for the delivery of eyedrop uing a microinfuion pump
1000
Experimental tudy of tetrodotoxin, a long-acting topical anethetic Original Reearch Article