<< مقالات لاتين >>
<< بر اساس عنوان >>
1
F & H monopoles Original Research Article
2
F 12511, a novel ACAT inhibitor, and atorvastatin regulate endogenous hypercholesterolemia in a synergistic manner in New Zealand rabbits fed a casein-enriched diet
3
F gene recombination between genotype II and VII Newcastle disease virus
4
F wave as a measure of selective suppression of the anterior horn cells involving only the volitionally inactivated muscle
5
F wave duration in mild S1 radiculopathy: comparison between the affected and unaffected sides
6
F wave study in amyotrophic lateral sclerosis: Assessment of balance between upper and lower motor neuron involvement
7
f(R) gravity theory and CMBR constraints
8
F, Cl, and S concentrations in olivine-hosted melt inclusions from mafic dikes in NW Namibia and implications for the environmental impact of the Paraná–Etendeka Large Igneous Province
9
F. Armstrong and K. Blundell, Editors, Energy … Beyond Oil, Oxford University Press (2007) 240 pp., £25, Hardbound, ISBN-13: 978-0-19-920996-5 http://www.oup.com/.
10
F. Barberini, R. Franci and L. Toti Rigatelli, Editors, Gino Arrighi. La matematica dellʹEtà di Mezzo. Scritti scelti, Edizioni ETS, Pisa (2004) ISBN 88-467-1043-6 450 pp. (paperback). 22.00€ [euros].
11
F. Bemak, R.C. Chung and P.B. Pedersen, Counseling Refugees: A Psychosocial Approach to Innovative Multicultural Interventions, Greenwood Press, Westport CT (2003) ($ 64.95 (Cloth), 256 pp.).
12
F. Boller and J. Grafman, Handbook of Neuropsychology Vol. 7, Elsevier, Amsterdam (1992).
13
F. Bronner, Nutritional and Clinical Management of Chronic Conditions and Diseases, CRC Taylor & Francis, Boca Raton, Florida (2006) ISBN 0-8493-2765-2.
14
F. Brown, L.R. Haaheim, J.M. Wood and G.C. Schild, Laboratory correlates of immunity to influenza—A reassessment, Karger, London (2003) Basel.
15
F. Ferraty and P. Vieu, Nonparametric functional data analysis: Theory and practice, Springer Series in Statistics, Springer, Berlin (2006) ISBN 978-0-387-30369-7, p. XX, 268pp 29 illus., Hardcover..
16
F. Ferraty and P. Vieu, Nonparametric functional data analysis: Theory and practice, Springer Series in Statistics, Springer, Berlin (2006) ISBN 978-0-387- 30369-7, p. XX, 268pp 29 illus., Hardcover..
17
F. Furubo, R. Rist and R. Sandahl, Editors, International atlas of evaluation, Transaction Publishers, New Brunswick, NJ (2002) (Reviewed by Craig Russon, President, Programme Planning & Evaluation, Inc.).
18
F. Gobet, A. de Voogt, J. Retschitzki, Moves in Mind: The Psychology of Board Games.
19
F. Goodson, Review of the Evolution and Function of Cognition, Lawrence Erlbaum (2003).
20
F. H. Jacobi on faith, or what it takes to bean irrationalist
21
F. Hunter, Everyday Homeopathy for Animals, 1st ed., Beaconsfield Publishers, 2004, ISBN 0 9085 8454X, 479 pp; 20 (soft)
22
F. John Lewis, MD: 1916–1993
23
F. Renata and F. John, Organizational Discourse: A Language-Ideology-Power Perspective, Westport, CN, Praeger (2004) paper, 240 pp., $89.95.
24
F.A. Mettler and M.J. Guiberteau, Editors, Essentials of nuclear medicine imaging, Saunders/Elsevier, Philadelphia, PA (2006) 512 pages, over 600 illustrations, US$95.00, ISBN: 0-7216-0201-0..
25
F.A.L.C.A.D.E.: a fuzzy software for the energy and environmental balances of products
26
F.A.L.C.A.D.E.: a fuzzy software for the energy and environmental balances of products
27
F.K. Erhard Voeltz, Christa Killian-Hatz (Eds.), Typological Studies in Language 44, John Benjamins Publishing Co., Ideophones, 2001 (x, 436 pp., US and Canada: US$ 114.00, Rest of world: €125.00, hardcover, ISSN 0167-7373).
28
F.L. Pryor, Editor, Economic Systems of Foraging, Agricultural and Industrial Societies, Cambridge University Press, Cambridge (2005) 332 pages, £40 (Hardback), £17.99 (Paperback), ISBN 0-521-84904-7 (Hardback), 0-521-61347-7 (Paperback).
29
F.M. Pulselli, S. Bastianoni, N. Marchettini, E. Tiezzi, The Road to Sustainability: GDP and Future Generations WIT Press, Southhampton, UK, 197 p.
30
F.M. Quinn, Principles and Practice of Nurse Education, Croom Helm, 1980, ISBN 0-85664-891-4, £13.95.
31
F.O. Lin, Designing distributed learning environments with intelligent software agents, Information Science Publishing, Hershey, PA (2005) ISBN 159140501-7, p. 311 (paper), US$69.95.
32
F: Screening, case finding and risk factor assessment in the general hospital, 17.06.00, 15:45–17:15
33
F+ ion implantation induced cell attachment on intraocular lens
34
F+ laser performance and interaction of Cu, Ag and Au at the reduced oxygen coordination of MgO surface: first principles calculations
35
F+ RNA coliphage-based microbial source tracking in water resources of South Korea Original Research Article
36
F− and OH− induced monodeprotonation of a lacunar cationic dibenzotetraaza[14]annulene: experimental evidence of tautomerism in a monoanionic macrocycle
37
F−/Cl− mediated microwave assisted breakdown of cellulose to glucose
38
F−-Induced ‘turn-on’ fluorescent chemosensor based on 1,3-alt thiacalix[4]arene
39
F003 The relation between serum fibrinogen and magnesium with relative index of cpkmb/cpk activity in myocardial infarction
40
F005 Minimally invasive coronary artery surgery in women
41
F012 Enalapril upregulates smooth muscle myosin heavy chain isoform in intramyocardial arteries from spontaneously hypertensive rats
42
F013 The status of major risk factors of atherosclerosis in children and adolescents of Isfahan
43
F020 Tumor necrosis factor-α-mediated signaling molecules in the regulation of macrophage scavenger receptor
44
F021 Age-related structural reorganization of human aortic endothelium: role in atherogenesis
45
F025 Cardiovascular disease situation and preventive actions in Iran
46
F030 The association of heart rate urinary electrolytes excretion in Isfahan population
47
F036 Response to bezafibrate in combined hyperlipidaemia
48
F037 Effect of synthetic HMG-COA reductase inhibitors on cholesterol synthesis in various human cell types and on progesterone secretion from human granulosa cells in culture
49
F042 Reactive oxygen species are involved in shear stress-induced intracellular adhesion molecule-1 (ICAM-1) expression in endothelial cells
50
F048 Endothelial heterogeneity, viral infection and human atherosclerosis
51
F052 Effect of dietary fish oil on plasma lipoprotein cholesterol in rats fed a diet enriched in cholesterol and sucrose
52
F053 Macrophage scavenger receptor-mediated signal transduction
53
F054 Biochemical characterization of an unknown apolipoprotein and its implications for dyslipidemia and lipid peroxidation
54
F060 The antioxidative capacity of black bean extract
55
F063 Assessment of plasma lipids status of long-term vegetarian
56
F068 Myocardial protective effect of trilinolein: a triacylglycerol isolated from the medicinal plant panax pseudoginseng
57
F069 The influence of probucol on PDGF-A and PDGF-B gene expression in peropheral blood monocytes (PBM) in patients after myocardial infraction
58
F073 Effect of degree of obesity on coronary artery disease and its major risk factors
59
F076 The prevalence of diabetes mellitus based on different diagnostic criteria in an urban community in Isfahan/Iran
60
F077 Inhibition of lysine residue of d2-dopamine receptors results in decrease dopaminergic and increase b-adrenergic effect
61
F080 Influence of current- and long-term metabolic state on PTCA-outcome in diabetics
62
F082 Investigation of mutations and polymorphisms in the lipoprotein lipase gene
63
F0ROM A STATIC TO A DYNAMIC CONCEPT OF RISK: THE CIRCADIAN EPIDEMIOLOGY OF CARDIOVASCULAR EVENTS
64
f1(1285) formation in two-photon collisions at LEP
65
f1: a code to compute Appellʹs F1 hypergeometric function Original Research Article
66
F127-based multi-block copolymer additives with poly(N,N-dimethylamino-2-ethyl methacrylate) end chains: The hydrophilicity and stimuli-responsive behavior investigation in polyethersulfone membranes modification
67
F144 Long-term effect of a HMG-CoA reductase inhibitor, pravastatin, in glomerulonephritis patients with hyperlipidaemia: an 18-month experience
68
F-16/SPICE Separation Analysis-Summary of the Risk-Reduction Phase Program
69
F-18 FDG PET in detecting uterine leiomyoma
70
F-18 FDG PET/CT Imaging of Eccrine Sweat Gland Carcinoma of the Scrotum with Extensive Regional and Distant Metastases
71
F-18 FDG PET/CT imaging of primary hepatic neuroendocrine tumor
72
F-18 FDG PET-CT Influences Target Delineation When Combined With Standard CT-Based Radiotherapy Planning in the Palliative Setting in Malignant Pleural Mesothelioma; an Exploratory Study
73
F-18 FP-CIT PET in Multiple System Atrophy of the Cerebellar Type: Additional Role in Treatment
74
F-18 production with the TOP linac injector
75
F-18 production with the TOP linac injector
76
F18-FDG Cardiac PET/CT: An Alternative Tool for Myocardial Viability Determination Prior to Coronary Revascularization Decision in Severe Ventricular Dysfunction
77
F-18-FDG uptake is a reliable predictory of functional recovery of akinetic but viable infarct regions as defined by magnetic resonance imaging before and after revascularization
78
F-18-Fluorodeoxyglucose PET Imaging Alters Clinical Decision Making in Patients With Impaired Ventricular Function
79
F-18-Fluorodeoxyglucose Positron Emission Tomography Imaging-Assisted Management of Patients With Severe Left Ventricular Dysfunction and Suspected Coronary Disease: A Randomized, Controlled Trial (PARR-2) Original Research Article
80
F1-ATP Synthaseβ-Subunit and CytochromecTranscriptional Regulation in Right Ventricular Hemodynamic Overload and Hypertrophically Stimulated Cardiocytes
81
F2 laser etching of GaN
82
F2 laser induced oxidation of inorganic material
83
F2 layer characteristics and electrojet strength over an equatorial station Original Research Article
84
F2 layer response to geomagnetic disturbances in Eastern Asia under the low solar activity Original Research Article
85
F2+ defect based model for tunable laser activity and interaction of atomic halogens (F, Cl and Br) at the low coordinated surfaces of LiH: ab initio calculations
86
F2FMI: A toolkit for facilitating face-to-face mobile interaction
87
F2-isoprostane generation in isolated ferret lungs after oxidant injury or ventilated ischemia
88
F2-Isoprostane level is associated with the angiotensin II type 1 receptor -153A/G gene polymorphism
89
F2-isoprostanes are not just markers of oxidative stress
90
F2-isoprostanes: sensitive and specific non-invasive indices of lipid peroxidation in vivo
91
F2-laser modification and patterning of silicone films
92
F2α-isoprostane, Na+-K+ ATPase and membrane fluidity of placental syncytiotrophoblast cell in preeclamptic women with vitamin E supplementation
93
F3 layer feature under low and medium solar activity observed at a Chinese low latitude station Fuke Original Research Article
94
F3/Contactin Acts as a Functional Ligand for Notch during Oligodendrocyte Maturation
95
F3TM: Flooding Factor based Trust Management Framework for secure data transmission in MANETs
96
F4 receptor-independent priming of the systemic immune system of pigs by low oral doses of F4 fimbriae
97
F4 receptor-independent priming of the systemic immune system of pigs by low oral doses of F4 fimbriae
98
F42. Minimal sufficiency of a complete sufficient statistic
99
F420-dependent enzymes – potential for applications in biotechnology
100
F43. Irrelevance of labels in estimation
101
F44. Fallacy in the proof of Birnbaumʹs theorem: the reply by Berger (F28)
102
F44B. A reply to F44A
103
F45. A comment on ‘the insufficiency of some definitions of sufficiency’, F25
104
F46. Varieties of the regression fallacy
105
F47. Conditionality in structural inference
106
F48. A lacuna in the definition of Pitman-closerness
107
F49. Nonunique estimates of ability
108
F4E R&D programme and results on in-vessel dust and tritium
109
F4E studies for the electromagnetic analysis of ITER components
110
F5 contributions to the non-Abelian Born–Infeld action from a supersymmetric Yang–Mills five-point function Original Research Article
111
FA Burgener, M Kormano and T Pudas, Differential diagnosis in conventional radiology (3rd ed.), Thieme, New York/Stuttgart (2008) ISBN 978-1-58890-275-7 879 pages, 2190 illustrations, US$249.95.
112
FA Burgener, M Kormano and T Pudas, The chest x-ray. Differential diagnosis in conventional radiology (2nd revised edition), Thieme, Stuttgart, New York (2006) ISBN 1-58890-446-6 [216 pages, 498 illustrations, USA $99.95].
113
FA Mettler Jr. and AC Upton, Medical Effects of Ionizing Radiation (3rd edition.), Saunders/Elsevier Inc., Philadelphia, PA (2008) ISBN 978-0-7216-0200-4 115 illustrations, numerous tables.
114
FA(Ga+,In+,Tl+) tunable laser activity and interaction of halogen atoms (F,Cl,Br,I,At) at the (0 0 1) surface of KCl crystal: ab initio calculations
115
FA1:La2+ and FA2:Sc2+ color center lasers and color image sensitization at the low coordination (0 0 1) surface of AgBr by ab initio calculations
116
FA15, a hydrophobic derivative of ferulic acid, suppresses inflammatory responses and skin tumor promotion: comparison with ferulic acid
117
FA2BOUG—A FORTRAN 90 code to compute Bouguer gravity anomalies from gridded free-air anomalies: Application to the Atlantic-Mediterranean transition zone
118
Faà di Bruno’s formula and the distributions of random partitions in population genetics and physics
119
Faà di Brunoʹs formula, lattices, and partitions
120
FA-ABC: A Novel Combination of Firefly Optimization Algorithm and Artificial Bee Colony for Mathematical Test Functions and Real-World Problems
121
FAAS determination of metal nutrients in fish feed after ultrasound extraction
122
FAB CIDMS/MS analysis of partially methylated maltotrioses derived from methylated amylose: a study of the substituent distribution Original Research Article
123
Fab Fragments Directed against Laminin 5 Induce Subepidermal Blisters in Neonatal Mice
124
Fab MOR03268 Triggers Absorption Shift of a Diagnostic Dye via Packaging in a Solvent-shielded Fab Dimer Interface
125
Fab′-Induced Folding of Antigenic N-Terminal Peptides from Intrinsically Disordered HIV-1 Tat Revealed by X-ray Crystallography
126
Faba bean (Vicia faba var. minor) as a protein source for organic chickens: performance and carcass characteristics
127
FABA BEAN AND FIELD PEA SEED PROPORTION FOR INTERCROPPING SYSTEM IN HORRO HIGHLANDS OF WESTERN ETHIOPIA
128
FABA BEAN CROP-WATER RELATIONSHIPS,YIELD AND APHID POPULATION UNDER DIFFERENT SOWING DATES AND IRRIGATION SCHEDULING REGIMES
129
FABA BEAN PRODUCTIVITY AS AFFECTED BY NUMBER OF IRRIGATIONS IN NILE DELTA
130
Faba bean productivity under rainfed and supplemental irrigation in northern Syria
131
Faber polynomial coefficient estimates for bi-univalent functions defined by subordinations
132
Faber polynomial coefficient estimates for certain classes of bi-univalent functions defined by using the Jackson (p,q)-derivative operator
133
Fabergé optics and edge filter for a wood powder fuelled thermophotovoltaic system
134
Faber–Krahn type inequalities for trees
135
FaBiO and CiTO: Ontologies for describing bibliographic resources and citations
136
Fabled service: Ordinary acts, extraordinary outcomes : by Betsy Sanders. San Diego, CA: Pfeiffer & Co., 1995. 128p. $19.95. ISBN 0-89384-270-2 (Warren Bennis Executive Briefing Series). (Inserted into spiral binder together with
137
Fabless or IDM? What the Future Holds for Both: An Interview with Cirrus Logic Chairman, Michael L. Hackworth
138
FABP9 Mutations Are Not Detected in Cases of Infertility due to Sperm Morphological Defects in Iranian Men
139
Fabric analyses of some Saudi Arabian pediment gravels
140
Fabric Analysis: Application to Paleolithic Sites
141
Fabric and elastic principal directions of cancellous bone are closely related
142
Fabric anisotropy and its influence on physical weathering of different types of Carrara marbles
143
Fabric Architecture and Flexible Design
144
FABRIC ARCHITECTURE IN EGYPT
145
Fabric area network – a new wireless communications infrastructure to enable ubiquitous networking and sensing on intelligent clothing
146
Fabric attractors in general triclinic flow systems and their application to high strain shear zones: A dynamical system approach
147
Fabric control on strain and rupture of heterogeneous shale samples by using a non-conventional mechanical test
148
Fabric cutting application of FeAl-based alloys
149
Fabric cutting application of FeAl-based alloys
150
Fabric defect detection based on multiple fractal features and support vector data description
151
Fabric defect detection based on multiple fractal features and support vector data description
152
Fabric defect detection by Fourier analysis
153
Fabric development as the key for forming ductile shear zones and enabling plate tectonics
154
Fabric development during exhumation from ultrahigh-pressure in an eclogite-bearing shear zone, Western Gneiss Region, Norway
155
Fabric development in (Mg,Fe)O during large strain, shear deformation: implications for seismic anisotropy in Earth’s lower mantle
156
Fabric development in a weathering profile at a basement–cover interface, the sub-Cambrian peneplain, Israel: Implications for decollement tectonics
157
Fabric domains in quartz mylonites: localized three dimensional analysis of microstructure and texture
158
Fabric drape simulation by solid-shell finite element method
159
Fabric evidence for granodiorite emplacement with extensional shear zones in the Variscan Gredos massif (Spanish Central System)
160
Fabric evolution in Salem-Attur Shear Zone, South India, and its implications on the kinematics
161
Fabric Evolution of Ellipsoidal Arrays with Different Particle Shapes
162
Fabric filter bag investigation following field testing of sorbent injection for mercury control at TXUʹs Big Brown Station
163
Fabric of Palaeolithic levels: methods and implications for site formation processes
164
Fabric reactivation: an example from the Hualapai Mountains, NW Arizona, USA
165
Fabric stability in oblique convergence and divergence
166
Fabric studies on contaminated mineral layers in composite liners
167
Fabric superposition in upper mantle peridotite, Red Hills, New Zealand
168
Fabric surface properties affected by low temperature plasma treatment
169
Fabric tensor based boundary element analysis of porous solids
170
Fabric variability associated with periglacial mass-wasting at Eagle Summit, Alaska
171
Fabric, Strain and Structural Development in Three Dimensions
172
Fabricant and characterization of SrWO4 and novel silver-doped SrWO4 using co-precipitation method: their photocatalytic performances for methyl orange degradation
173
Fabricate and characterization of Ag/BaAl2O4 and its photocatalytic performance towards oxidation of gaseous toluene studied by FTIR spectroscopy
174
Fabricated and improved electrochemical properties of Li2MnSiO4 cathodes by hydrothermal reaction for Li-ion batteries
175
Fabricated AZO on Dual-Stacked Patch Transparent Antenna
176
Fabricated nano-disk InGaN/GaN multi-quantum well of the inverse hexagonal pyramids Original Research Article
177
Fabricated or Assault Wounds - A Scientific Approach
178
Fabricated Synthesis Modify Multi Walled Carbon Nanotubes Carboxylate of Trace Co(II) in Water Samples by Dispersive Solid Phase Extraction
179
Fabricating and prefabricating language: troubling trends in librarie
180
Fabricating antigen recognition and anti-bioadhesion polymeric surface via a photografting polymerization strategy
181
Fabricating Au–Ag core-shell composite films for surface-enhanced Raman scattering
182
Fabricating CAD/CAM Implant-Retained Mandibular Bar Overdentures: A Clinical and Technical Overview
183
Fabricating CdS/BiVO4 and BiVO4/CdS heterostructured film photoelectrodes for photoelectrochemical applications
184
Fabricating chiral polydiacetylene film by monolayer compression and circularly polarized ultra-violet light
185
Fabricating data: How substituting values for nondetects can ruin results, and what can be done about it
186
Fabricating electroconductive cotton textiles using graphene
187
Fabricating Elegance: Digital Architectureʹs Coming of Age
188
Fabricating fine-grained tungsten heavy alloy by spark plasma sintering of low-energy ball-milled W–2Mo–7Ni–3Fe powders
189
Fabricating Graphite Coated Copper Via Airbrushing
190
Fabricating high performance n-channel lateral double diffused metal–oxide–semiconductor transistors utilizing the shallow trench isolation as a salicide blocking mask of the drift region
191
Fabricating interlocking support walls, with an adjustable backshort, in a TES bolometer array for far-infrared astronomy
192
Fabricating interlocking support walls, with an adjustable backshort, in a TES bolometer array for far-infrared astronomy
193
FABRICATING MIRRORS FOR LASER VIBROMETER TESTING
194
Fabricating NIS tunnel junctions on single crystal superconducting substrate by a lithographic process
195
Fabricating non-photodefinable polymer microstructures for micro-total-analysis
196
Fabricating ordered 2D arrays of magnetic rings on patterned self-assembly monolayers via dewetting and thermal decomposition
197
Fabricating ordered porous monolayers from colloidal monolayer and multilayer
198
Fabricating PC/PAN composite membranes by vapor-induced phase separation Original Research Article
199
Fabricating Pluralism
200
Fabricating polythiophene into highly aligned microwire film by fast evaporation of its whisker solution
201
Fabricating protein nanopatterns on a single DNA molecule with Dip-pen nanolithography
202
Fabricating protein nanopatterns on a single DNA molecule with Dip-pen nanolithography
203
Fabricating protein nanopatterns on a single DNA molecule with Dip-pen nanolithography
204
Fabricating random arrays of boron doped diamond nano-disc electrodes: Towards achieving maximum Faradaic current with minimum capacitive charging
205
Fabricating red–blue-switching dual polymer electrochromic devices using room temperature ionic liquid
206
Fabricating RNA Microarrays with RNA-DNA Surface Ligation Chemistry
207
Fabricating semi-conducting polymer photonic structures via near-field scanning optical lithography
208
Fabricating solid carbon porous electrodes from powders
209
Fabricating superhydrophobic aluminum: An optimized one-step wet synthesis using fluoroalkyl silane
210
Fabricating the Tribological Properties and Investigating of Ni3Al-MoS2 Composite Coating
211
Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process
212
Fabricating tubular scaffolds with a radial pore size gradient by a spinning technique
213
Fabricating tunable nanoparticle density gradients with the contact printing based approach
214
Fabrication and Optical Characterization of Silicon Nanostructure Arrays by Laser Interference Lithography and Metal-Assisted Chemical Etching
215
Fabrication a composite carbon paste electrodes (CPEs) modified with multi-wall carbon nano-tubes (MWCNTs/N, N-Bis (salicyliden)-1,3-propandiamine) for determination of lanthanum (III)
216
Fabrication and ablation testing of 4D C/C composite at 10 MW/m2 heat flux under a plasma arc heater
217
Fabrication and absorbing property of microwave absorbers based on BaAl2Fe10O19 and poly(o-toluidine)
218
Fabrication and adhesion performance of gold conductive patterns on silicon substrate by laser sintering
219
Fabrication and adhesive properties of thin organosilane films coated on low carbon steel substrates
220
Fabrication and AFM Investigation of the TemperatureDependent Surface Morphology of Au (100) Single Crystal Ultramicroelectrodes
221
Fabrication and aggregation of thermoresponsive glucose-functionalized double hydrophilic copolymers
222
Fabrication and ammonia gas sensing of palladium/polypyrrole nanocomposite
223
Fabrication and analysis of anti-corrosion coatings on in-situ TiB2p reinforced aluminum matrix composite
224
Fabrication and analysis of buried iron silicide microstructures using a focused low energy electron beam
225
Fabrication and analysis of cylindrical resin AFM microcantilevers
226
Fabrication and analysis of cylindrical resin AFM microcantilevers
227
Fabrication and analysis of dye-sensitized solar cell using natural dye extracted from dragon fruit
228
Fabrication and analysis of nano-hydroxyapatite [Ca10(PO4)6(OH)2] composites with collagen derived from eggshells through freeze-drying
229
Fabrication and analysis of small-scale thermal energy storage with conductivity enhancement
230
Fabrication and analysis of the nanometer-sized structure of silicon by ultrahigh vacuum field emission transmission electron microscope
231
Fabrication and Analysis of Valve-less Micro-pumps
232
Fabrication and analysis of ZnO thin film bulk acoustic resonators
233
Fabrication and annealing analysis of three-dimensional photonic crystals
234
Fabrication and antibacterial properties of ZnO–alginate nanocomposites
235
Fabrication and anti-frosting performance of super hydrophobic coating based on modified nano-sized calcium carbonate and ordinary polyacrylate
236
Fabrication and application of a diamond-film glucose biosensor based on a H2O2 microarray electrode
237
Fabrication and application of a new DNA biosensor based on on-substrate PCR and electrochemistry
238
Fabrication and application of a new modified electrochemical sensor using nano-silica and a newly synthesized Schiff base for simultaneous determination of Cd2+, Cu2+ and Hg2+ ions in water and some foodstuff samples Original Research Article
239
Fabrication and application of a novel plant hormone sensor for the determination of methyl jasmonate based on self-assembling of phosphotungstic acid–graphene oxide nanohybrid on graphite electrode
240
Fabrication and application of a stacked carbon electrode set including a suspended mesh made of nanowires and a substrate-bound planar electrode toward for an electrochemical/biosensor platform
241
Fabrication and application of an activated carbon-coated quartz crystal sensor
242
Fabrication and application of high quality diamond-coated tools
243
Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals Original Research Article
244
Fabrication and application of neoglycolipid arrays in a microtiter plate
245
Fabrication and application of novel hydrophilic nanomold Original Research Article
246
Fabrication and application of relaxed buffer layers
247
Fabrication and application of relaxed buffer layers
248
Fabrication and application of silicalite-1 and TS-1 hollow fibers with polyethylene imine (PEI) fibers as substrates
249
Fabrication and application of silicon nanowire transistor arrays for biomolecular detection
250
Fabrication and application of vapor grown carbon fiber
251
Fabrication and Applications of Conducting Polymer Nanotube, Nanowire, Nanohole, and Double Wall Nanotube
252
Fabrication and arc erosion behaviors of AgTiB2 contact materials
253
Fabrication and atomic force microscopy/friction force microscopy (AFM/FFM) studies of polyacrylamide–carbon nanotubes (PAM–CNTs) copolymer thin films
254
Fabrication and biocompatibility investigation of TiO2 films on the polymer substrates obtained via a novel and versatile route
255
Fabrication and biocompatibility of polypyrrole implants suitable for neural prosthetics
256
Fabrication and biological evaluation of chitosan coated hyaluronic acid-docetaxel conjugate nanoparticles in CD44+ cancer cells
257
Fabrication and bioseparation studies of adsorptive membranes/felts made from electrospun cellulose acetate nanofibers
258
Fabrication and brazeability of a three-layer 4343/3003/4343 aluminum clad sheet by rolling
259
Fabrication and buckling behavior of polycrystalline palladium, cobalt, and rhodium nanostructures
260
Fabrication and calibration of a gas sensor based on chemically vapor deposited WO3 films on silicon substrates: Application to H2 sensing
261
Fabrication and capacitance of Ni2+–Fe3+ LDHs/MnO2 layered nanocomposite via an exfoliation/reassembling process
262
Fabrication and carbon monoxide sensing characteristics of mesostructured carbon gas sensors
263
Fabrication and catalytic activity of ultra-long V2O5 nanowires on the thermal decomposition of ammonium perchlorate
264
Fabrication and catalytic properties of novel urchin-like Co3O4
265
Fabrication and catalytic properties of Pd and Ce decorated carbon nanotube-TiO2 composite catalysts for low-temperature CO oxidation
266
Fabrication and catalytic property of an Ag@poly(3,4-ethylenedioxythiophene) yolk/shell structure
267
Fabrication and cellular biocompatibility of porous carbonated biphasic calcium phosphate ceramics with a nanostructure
268
Fabrication and cellular compatibility of aligned chitosan–PCL fibers for nerve tissue regeneration
269
Fabrication and characterisation of (Ba,Sr)TiO3 thin films by sol–gel technique through organic precursor route
270
Fabrication and characterisation of a new sensing device based on hydrocarbon groups (CHx) coated porous silicon
271
Fabrication and characterisation of Al–7Si–0.35Mg/fly ash metal matrix composites processed by different stir casting routes
272
Fabrication and characterisation of barium strontium titanate thick film device structures for microwave applications
273
Fabrication and characterisation of cellular alumina articles produced via radiation curable dispersions
274
Fabrication and characterisation of chitosan nanoparticles/plasticised-starch composites
275
Fabrication and characterisation of Cr and Co doped Bi1.5Zn0.92Nb1.5O6.92 pyrochlores
276
Fabrication and characterisation of CuInSe2/Si(1 0 0) thin films by the stacked elemental layer (SEL) technique
277
Fabrication and characterisation of high performance polypyrrole modified microarray sensor for ascorbic acid determination Original Research Article
278
Fabrication and characterisation of La0.8Sr0.2MnO3/metal interfaces for application in SOFCs
279
Fabrication and Characterisation of Lavender Oil and Plant Phospholipid Based Sumatriptan Succinate Hybrid Nano Lipid Carriers
280
Fabrication and characterisation of microporous activated carbon-based pre-concentrators for benzene vapours
281
Fabrication and characterisation of Ni-coated carbon fibre-reinforced alumina ceramic matrix composites using electrophoretic deposition Original Research Article
282
Fabrication and characterisation of NiO/ZnO structures
283
Fabrication and characterisation of parallel multijunction thin film silicon solar cells
284
Fabrication and characterisation of polymer thin-films derived from cineole using radio frequency plasma polymerisation
285
Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive
286
Fabrication and characterisation of protein fibril–elastomer composites
287
Fabrication and characterisation of p-type GaN metal-semiconductor-metal ultraviolet photoconductors grown by MBE
288
Fabrication and characterisation of p-type GaN metal-semiconductor-metal ultraviolet photoconductors grown by MBE
289
Fabrication and characterisation of pure magnesium-30 vol.% SiCP particle composite
290
Fabrication and characterisation of pure magnesium-30 vol.% SiCP particle composite
291
Fabrication and characterisation of self-assembled monolayers of N-[3-(trimethoxysilyl)propyl]diethylenetriamine on silica particles
292
Fabrication and characterisation of silicon carbide/superalloy interfaces
293
Fabrication and characterisation of U0.85Am0.15O2−x discs for MARIOS irradiation program
294
Fabrication and characterisation of ultra sharp silicon field emitters
295
Fabrication and characterisation of ultra sharp silicon field emitters
296
Fabrication and characterisation of ultra-thin tungsten–carbon (W/C) and platinum–carbon (Pt/C) multilayers for X-ray mirrors
297
Fabrication and characterisation of α-chitin nanofibers and highly transparent chitin films by pulsed ultrasonication
298
Fabrication and characterisations of n-CdS/p-PbS heterojunction solar cells using microwave-assisted chemical bath deposition
299
Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting
300
Fabrication and characteristic of non-oxide fiber tow reinforced silicon nitride matrix composites by low temperature CVI process
301
Fabrication and Characteristic Responses of Integrated Microelectrodes in Polymer Channel Chip
302
Fabrication and Characteristics of 8YSZ/Ni Functionally Graded Materials by Applying Spark Plasma Sintering Procedure
303
Fabrication and characteristics of a composite cathode of sulfonated polyaniline and Ramsdellite–MnO2 for a new rechargeable lithium polymer battery
304
Fabrication and characteristics of a surface acoustic wave UV sensor based on ZnO thin films grown on a polycrystalline 3C–SiC buffer layer
305
Fabrication and characteristics of anode as an electrolyte reservoir for molten carbonate fuel cell
306
Fabrication and characteristics of anode-supported flat-tube solid oxide fuel cell
307
Fabrication and characteristics of Ba(Zr0.1,Ti0.9)O3 thin films on glass substrate Original Research Article
308
Fabrication and characteristics of bulk semi-insulating 6H-SiC semiconductor detector for an α radiation at room temperature
309
Fabrication and characteristics of bulk semi-insulating 6H-SiC semiconductor detector for an α radiation at room temperature
310
Fabrication and characteristics of CO2-gas sensor using Li2CO3–Li3PO4–Al2O3 electrolyte and LiMn2O4 reference electrode
311
Fabrication and characteristics of composite containing HCl-doped polyaniline and Ni nanoparticles
312
Fabrication and characteristics of cube-post microreactors for methanol steam reforming
313
Fabrication and characteristics of Fe3O4-polymer composite particles by hybridization
314
Fabrication and characteristics of GaP-AlGaP tapered waveguide semiconductor Raman amplifiers
315
Fabrication and characteristics of high-speed implant-confined index-guided lateral-current 850-nm vertical cavity surface-emitting lasers
316
Fabrication and characteristics of impact type ultrasonic motor
317
Fabrication and characteristics of in situ Al12W particles reinforced aluminum matrix composites by reaction sintering
318
Fabrication and characteristics of melt-spun Al ribbons reinforced with nano/micro-BN phases
319
Fabrication and characteristics of novel microelectronic structures fabricated by plasma-based techniques
320
Fabrication and characteristics of photodiode based on ZnO nanowire arrays and spray-coated regioregular P3HT layers
321
Fabrication and characteristics of planar-type methane reformer using ceria-based oxygen permeable membrane
322
Fabrication and characteristics of plasma facing SiC/C functionally graded composite material
323
Fabrication and characteristics of porous NiTi shape memory alloy synthesized by microwave sintering
324
Fabrication and characteristics of Schottky diode based on composite organic semiconductors
325
Fabrication and characteristics of Schottky diodes based on regioregular poly(3-hexylthiophene)/Al junction
326
Fabrication and characteristics of self-assembly nano-polystyrene films by laser induced CVD
327
Fabrication and characteristics of SiOx films by plasma chemical vapor deposition of tetramethylorthosilicate
328
Fabrication and characteristics of ta-C biomaterial coatings on Ti–6Al–4V using metal plasma immersion ion implantation and deposition
329
Fabrication and characteristics of thermal crosslinking polyurethane integrated double-channel electro-optic modulator
330
Fabrication and characteristics of TiB2/Al2O3 core/shell particles by hybridization
331
Fabrication and characteristics of transparent conducting In2O3-ZnO thin films by ultrasonic spray pyrolysis
332
Fabrication and characteristics of transparent conducting In2O3–ZnO thin films by ultrasonic spray pyrolysis
333
Fabrication and characteristics of ZnO thin films with an Al/Si (1 0 0) substrates
334
Fabrication and Characteristics Study Ni-nSiC Schottky Photodiode Detector
335
Fabrication and Characterization CdO:In/Si Photovoltaic Solar Cell Prepard By Thermal Evaporation
336
Fabrication and characterization for single crystal substrates of YBa2Cu3O7 δ and related materials
337
Fabrication and characterization for single crystal substrates of YBa2Cu3O7 δ and related materials
338
Fabrication and characterization of (Pb(Mg1/3Nb2/3)O3, Pb(Yb1/2Nb1/2)O3, PbTiO3) ternary system ceramics
339
Fabrication and characterization of (Pd/Ag)–La0.2Sr0.8CoO3−δ composite membrane on porous asymmetric substrates
340
Fabrication and characterization of (U, Am)O2−x transmutation targets
341
Fabrication and characterization of ‘self-binding’ nanocrystalline SnO2 powder based thick film ethanol sensor
342
Fabrication and Characterization of 0.24 Micron CMOS Device by Using Simulation
343
Fabrication and characterization of 2.5D and 3D SiCf/SiC composites
344
Fabrication and characterization of 3-dimensional PLGA nanofiber/microfiber composite scaffolds
345
Fabrication and characterization of 45S5 bioglass reinforced macroporous calcium silicate bioceramics
346
Fabrication and characterization of 4-tricyanovinyl-N,N-diethylaniline/p-silicon hybrid organic–inorganic solar cells
347
Fabrication and characterization of a boehmite nanoparticle impregnated electrospun fiber membrane for removal of metal ions
348
Fabrication and characterization of a carbon electrode coated with cation-exchange polymer for the membrane capacitive deionization applications
349
Fabrication and characterization of a carbon fibre reinforced carbon–silicon carbide–titanium silicon carbide hybrid matrix composite
350
Fabrication and characterization of a cathode-support solid oxide fuel cell by tape casting and lamination
351
Fabrication and characterization of a chemically oxidized-nanostructured porous silicon based biosensor implementing orienting protein A
352
Fabrication and characterization of a co-fired La0.6Sr0.4Co0.2Fe0.8O3−δ cathode-supported Ce0.9Gd0.1O1.95 thin-film for IT-SOFCs
353
Fabrication and Characterization of a Composite Composed of Gold Nanoparticles with Optimal Chemical and Biological Properties for Cancer and Biotechnology Applications: A Review
354
Fabrication and characterization of a composite ZnO semiconductor as electron transporting layer in dye-sensitized solar cells
355
Fabrication and Characterization of a Conductive Proton Exchange Membrane Based on Sulfonated Polystyrenedivinylbenzene Resin-Polyethylene (SPSDR-PE): Application in Direct Methanol Fuel Cells
356
Fabrication and characterization of a cotton candy like surface with superhydrophobicity
357
Fabrication and characterization of a dual layer ceramic interconnect on a porous NiO-YSZ anode support
358
Fabrication and characterization of a flat-plate static-concentrator photovoltaic module
359
Fabrication and characterization of a fluorescent sensor based on Rh 6G-functionlized silica nanoparticles for nitrite ion detection
360
Fabrication and characterization of a highly sensitive surface plasmon resonance based fiber optic pH sensor utilizing high index layer and smart hydrogel
361
Fabrication and characterization of a hydroxyapatite nanopowder by ultrasonic spray pyrolysis with salt-assisted decomposition
362
Fabrication and characterization of a laterally coupled vertical triple quantum dot device
363
Fabrication and characterization of a LiCoO2 battery–supercapacitor combination for a high-pulse power system
364
Fabrication and characterization of a miniaturized planar voltammetric sensor array for use in an electronic tongue
365
Fabrication and characterization of a Mo/Si multilayer monochromator with a narrow spectral bandwidth in the xuv domain
366
Fabrication and characterization of a Mo/Si multilayer monochromator with a narrow spectral bandwidth in the xuv domain
367
Fabrication and characterization of a multi-stage electroosmotic pump for liquid delivery
368
Fabrication and characterization of a nanogap edge emitter with a silicon-on-insulator wafer
369
Fabrication and characterization of a nanoporous NiO film with high specific energy and power via an electrochemical dealloying approach
370
FABRICATION AND CHARACTERIZATION OF A NEW MEMS CAPACITIVE MICROPHONE USING PERFORATED DIAPHRAGM
371
Fabrication and characterization of a Ni-YSZ anode support using high-frequency induction heated sintering (HFIHS)
372
Fabrication and characterization of a novel Luggin capillary reference electrode for use in solid state electrolytes
373
fabrication and characterization of a novel magnetic mil-101(cr) nanocomposite for selective selenite removal
374
Fabrication and characterization of a novel microparticle with gyrus-patterned surface and growth factor delivery for cartilage tissue engineering
375
Fabrication and characterization of a novel TiO2 nanoparticle self-assembly membrane with improved fouling resistance
376
Fabrication and characterization of a novel wafer-level micro-electrode system for dielectrophoresis manipulation
377
Fabrication and characterization of a PbTe quantum dots multilayer structure
378
Fabrication and characterization of a polysulfone-graphene oxide nanocomposite membrane for arsenate rejection from water
379
Fabrication and characterization of a porous carbon electrode for desalination of brackish water Original Research Article
380
Fabrication and characterization of a porous titanium dioxide film with sub-micropores
381
Fabrication and characterization of a PTFE-reinforced integral composite membrane for self-humidifying PEMFC
382
Fabrication and characterization of a recombinant fibronectin/cadherin bio-inspired ceramic surface and its influence on adhesion and ossification in vitro
383
Fabrication and characterization of a rigid magnetic matrix for protein adsorption
384
Fabrication and characterization of a smart drug delivery system: microsphere in hydrogel
385
Fabrication and characterization of a smart epitaxial piezoelectric micromachined ultrasonic transducer
386
Fabrication and characterization of a sponge-like asymmetric chitosan membrane as a wound dressing
387
Fabrication and characterization of a superconducting multiplexer using laser ablated YBCO thin films
388
Fabrication and characterization of a surface plasmon resonance based fiber optic sensor using gel entrapment technique for the detection of low glucose concentration
389
Fabrication and characterization of a surface plasmon resonance based fiber optic urea sensor for biomedical applications
390
Fabrication and characterization of a surface plasmon resonance based fiber-optic sensor for bittering component—Naringin
391
Fabrication and characterization of a surface-patterned thin film composite membrane
392
Fabrication and characterization of a triple functionalization of graphene oxide with Fe3O4, folic acid and doxorubicin as dual-targeted drug nanocarrier
393
Fabrication and characterization of a vertical lamination micromixer for mid-IR spectroscopy
394
Fabrication and characterization of a vertical pillar structure including a self-assembled quantum dot and a quantum well
395
Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol–gel coating method
396
Fabrication and characterization of a zirconia/multi-walled carbon nanotube mesoporous composite
397
Fabrication and characterization of a ZnO X-ray sensor using a high-resistivity ZnO single crystal grown by the hydrothermal method
398
Fabrication and characterization of a ZnO X-ray sensor using a high-resistivity ZnO single crystal grown by the hydrothermal method
399
Fabrication and characterization of a α,β,γ,δ-Tetrakis(1-methylpyridinium-4-yl)porphine/silica nanocomposite thin-layer membrane for detection of ppb-level heavy metal ions Original Research Article
400
Fabrication and characterization of advanced probes for magnetic force microscopy
401
Fabrication and characterization of Ag-SiO2 composite hollow nanospheres
402
Fabrication and characterization of Al/SiCp composites by CAR process
403
Fabrication and characterization of Al356/SiCp semisolid composites by injecting SiCp containing composite powders
404
Fabrication and Characterization of Al5083/Al2O3 Surface Nanocomposite via Friction Stir Processing
405
Fabrication and characterization of aligned nanofibrous PLGA/Collagen blends as bone tissue scaffolds
406
Fabrication and characterization of all-perovskite oxide p–n junctions based on La1−xSrxMnO3 and Nb-1wt% doped SrTiO3
407
Fabrication and characterization of Al-matrix composites reinforced with amino-functionalized carbon nanotubes
408
Fabrication and characterization of aluminum nanostructures and nanoparticles obtained using femtosecond ablation technique
409
Fabrication and characterization of aluminum nitride polymer matrix composites with high thermal conductivity and low dielectric constant for electronic packaging
410
Fabrication and characterization of aluminum-doped zinc oxide Schottky diodes on n-GaN
411
Fabrication and characterization of americium, neptunium and curium bearing MOX fuels obtained by powder metallurgy process
412
Fabrication and Characterization of Amidoxime-Grafted Silica Composite Particles via Emulsion Graft Polymerization
413
Fabrication and characterization of amorphous In–Zn–O/SiOx/ n-Si heterojunction solar cells
414
Fabrication and characterization of amorphous SiBCN powders
415
Fabrication and characterization of an evanescent wave fiber optic sensor for air pollution control
416
Fabrication and characterization of an inorganic gold and silica nanoparticle mediated drug delivery system for nitric oxide
417
Fabrication and characterization of an Li---Mn---O thin-film cathode for rechargeable lithium microbatteries
418
Fabrication and characterization of an optical fiber pH sensor using sol–gel deposited TiO2 film doped with organic dyes
419
Fabrication and characterization of anatase TiO2 thin film on glass substrate grown by pulsed laser deposition
420
Fabrication and characterization of anisotropic dielectrics for low-loss microwave applications
421
Fabrication and characterization of anode support low-temperature solid oxide fuel cell based on the samaria-doped ceria electrolyte
422
Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells
423
Fabrication and characterization of anode-supported single chamber solid oxide fuel cell based on La0.6Sr0.4Co0.2Fe0.8O3−δ–Ce0.9Gd0.1O1.95 composite cathode
424
Fabrication and characterization of anorthite-based ceramic using mineral raw materials
425
Fabrication and characterization of antibacterial PVDF hollow fibre membrane by doping Ag-loaded zeolites
426
Fabrication and characterization of APT specimens from high dose heavy ion irradiated materials
427
Fabrication and characterization of APT specimens from high dose heavy ion irradiated materials
428
Fabrication and characterization of Au/n-Si photodiode with lithium as back-surface-field
429
Fabrication and characterization of Au/SiO2 nanocomposite films
430
Fabrication and characterization of Au/SiO2 nanocomposite films grown by radio-frequency cosputtering
431
Fabrication and characterization of Au-nanoparticle/ W-nanodendrite structures on Al2O3 substrate
432
Fabrication and characterization of B2O3–Al2O3–Na2O glass system for transparent dielectric layer
433
Fabrication and characterization of Ba(Zr0.84Y0.15Cu0.01)O3−δ electrolyte-based protonic ceramic fuel cells
434
Fabrication and characterization of bioactive and antibacterial composites for dental applications
435
Fabrication and characterization of bioactive calcium silicate microspheres for drug delivery
436
Fabrication and characterization of bioactive glass (45S5)/titania biocomposites
437
Fabrication and characterization of bioactive glass/hydroxyapatite nanocomposite foam by gelcasting method
438
Fabrication and characterization of bioactive glass-ceramic using soda–lime–silica waste glass
439
Fabrication and characterization of bioactive silk fibroin/wollastonite composite scaffolds
440
Fabrication and characterization of bioactive wollastonite/PHBV composite scaffolds
441
Fabrication and characterization of bioactive β-Ca2SiO4/PHBV composite scaffolds
442
Fabrication and characterization of biodegradable composites based on microfibrillated cellulose and polyvinyl alcohol
443
Fabrication and characterization of biomimetic ceramic/polymer composite materials for dental restoration
444
Fabrication and characterization of biomimetic collagen–apatite scaffolds with tunable structures for bone tissue engineering
445
Fabrication and characterization of biomorphic 45S5 bioglass scaffold from sugarcane
446
Fabrication and Characterization of Biosynthesized Silver Nanoparticles using Cymbopogon citratus and Evaluation of its Antioxidant, Free Radicals and Reducing Power Activity
447
Fabrication and characterization of bismuth oxide–holmia nanofibers and nanoceramics
448
Fabrication and characterization of block copolymer micelle multilayer films prepared using dip-, spin- and spray-assisted layer-by-layer assembly deposition
449
Fabrication and Characterization of Bolus Material Using Propylene Glycol for Radiation Therapy
450
Fabrication and characterization of boron nitride bulk foam from borazine
451
Fabrication and characterization of BTDA-TDI/MDI (P84) co-polyimide membranes for the pervaporation dehydration of isopropanol
452
Fabrication and characterization of bulk glassy Co40Fe22Ta8B30 alloy with high thermal stability and excellent soft magnetic properties Original Research Article
453
Fabrication and characterization of C/SiC composites with large thickness, high density and near-stoichiometric matrix by heaterless chemical vapor infiltration
454
Fabrication and characterization of C60/tetrathiafulvalene solar cells Original Research Article
455
Fabrication and characterization of carbon nanoparticles for polymer based vapor sensors
456
Fabrication and characterization of carbon nanotube array electrodes with gold nanoparticle tips
457
Fabrication and characterization of carbon nanotube arrays using sandwich catalyst stacks Original Research Article
458
Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes
459
Fabrication and characterization of CdS nanotube arrays in porous anodic aluminum oxide templates
460
Fabrication and characterization of CdxZn(1−x)S nano particles
461
Fabrication and characterization of cellulose nanofiber based thin-film nanofibrous composite membranes
462
Fabrication and characterization of ceramic coatings with alumina–silica sol-incorporated α-alumina powder coated on woven quartz fiber fabrics
463
Fabrication and characterization of ceria-based buffer layers for solid oxide fuel cells
464
Fabrication and characterization of cerium-doped barium titanate inverse opal by sol–gel method
465
Fabrication and characterization of cerium-doped titania inverse opal by sol–gel method
466
Fabrication and characterization of cesium telluride photocathodes: A promising electron source for the Los Alamos Advanced FEL
467
Fabrication and characterization of chemically crosslinked keratin films
468
Fabrication and characterization of chemically sensitive needle tips with aluminum oxide nanopores for pH indication
469
Fabrication and characterization of chitosan/gelatin porous scaffolds with predefined internal microstructures
470
Fabrication and characterization of chitosan/gelatin scaffold with bioactive glass reinforcement using PRP to regenerate bone tissue
471
Fabrication and characterization of chitosan-polyvinyl alcohol-graphene oxide nanocomposite scaffold for wound healing purposes
472
Fabrication and characterization of chondroitin sulfate-modified chitosan membranes for biomedical applications Original Research Article
473
Fabrication and characterization of cobalt ferrite (CoFe2O4) nanofibers by electrospinning
474
Fabrication and Characterization of COL/PVA Nanofiber Scaffolds for Soft Tissue Engineering
475
Fabrication and characterization of components for cube shaped micro tubular SOFC bundle
476
Fabrication and characterization of composite electrolyte for intermediate-temperature SOFC
477
Fabrication and characterization of composite Langmuir–Schaefer films of poly(ortho-anisidine) conducting polymer and tri-(2,4-di-t-amylphenoxy)-(8-quinolinolyl) copper phthalocyanine
478
Fabrication and characterization of composite sol–gel coatings on porous ceramic substrate
479
Fabrication and characterization of conductive polypyrrole thin film prepared by in situ vapor-phase polymerization
480
Fabrication and characterization of copper nanoparticle thin-films and the electrocatalytic behavior
481
Fabrication and characterization of copper nanoparticle thin-films and the electrocatalytic behavior Original Research Article
482
Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO2) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures
483
Fabrication and Characterization of Copper-Red Mud Particulate Composites Prepared by Powder Metallurgy Technique
484
Fabrication and characterization of cordierite-bonded porous SiC ceramics
485
Fabrication and characterization of core-shell photonic crystals via a dipping process
486
Fabrication and characterization of Coriolis mass flowmeter made from Ti-based glassy tubes
487
Fabrication and Characterization of Covalently Functionalized poly Caprolactone Scaffold for Bone Tissue Engineering Application
488
Fabrication and characterization of CuAlO2 transparent thin films prepared by spray technique
489
Fabrication and characterization of cube textured Ni substrate for YBCO coated conductors
490
Fabrication and characterization of Cu–Ni–YSZ SOFC anodes for direct use of methane via Cu-electroplating
491
Fabrication and characterization of CuO-core/TiO2-shell one-dimensional nanostructures
492
Fabrication and characterization of cuprous oxide: fullerene solar cells
493
Fabrication and characterization of DBM/p-Si heterojunction solar cell
494
Fabrication and characterization of dense YBa2Cu3O7−y superconducting wires by extrusion technique
495
Fabrication and characterization of dense YBa2Cu3O7−y superconducting wires by extrusion technique
496
Fabrication and Characterization of Dental Implant Technology Utilizing Hydroxyapatite (HA) Nanoparticles Composed with Ceramics via Electrophoretic Deposition Technique on Stainless Steel
497
Fabrication and characterization of diamond/copper composites for thermal management substrate applications
498
Fabrication and characterization of diamond/copper composites for thermal management substrate applications
499
Fabrication and characterization of diamond-like carbon thin films by pulsed laser deposition
500
Fabrication and characterization of dipalmitoylphosphatidylcholine-attracting elastomeric material for joint replacements
501
Fabrication and characterization of disposable sensors and biosensors for detection of formaldehyde
502
Fabrication and characterization of disposable type lactate oxidase sensors for dairy products and clinical analysis
503
Fabrication and characterization of DNA–thionine–carbon nanotube nanocomposites
504
Fabrication and characterization of driver-fuel particles, designed-to-fail fuel particles, and fuel compacts for the US AGR-3/4 irradiation test
505
Fabrication and characterization of drug particles produced by electrospraying into reduced pressure
506
Fabrication and characterization of DTBP-crosslinked chitosan scaffolds for skin tissue engineering
507
Fabrication and characterization of dual phase magnesia–zirconia ceramics doped with plutonia
508
Fabrication and Characterization of Dye-doped Polymer Optical Fiber
509
Fabrication and characterization of easily sintered and stable anode-supported proton-conducting membranes
510
Fabrication and characterization of elastomeric scaffolds comprised of a citric acid-based polyester/hydroxyapatite microcomposite
511
Fabrication and characterization of electro-codeposited Ni/Zr-silicate composite coating
512
Fabrication and characterization of electroosmotic micropumps
513
Fabrication and characterization of electro-phosphorescent organic light-emitting devices with a ferromagnetic cathode for observation of spin injection effect
514
Fabrication and characterization of electrospun carbon nanotubes/titanium dioxide nanofibers used in anodes of dye-sensitized solar cells
515
Fabrication and characterization of electrospun carbon nanotubes/titanium dioxide nanofibers used in anodes of dye-sensitized solar cells
516
Fabrication and characterization of electrospun orthorhombic InVO4 nanofibers
517
Fabrication and characterization of electrospun osteon mimicking scaffolds for bone tissue engineering
518
Fabrication and characterization of electrospun PVA/Cs/CNT fibers
519
Fabrication and Characterization of Electrospun Wool Nanoparticles/Nylon 6 Composite Nanofiber Yarn
520
Fabrication and characterization of energy storing supercapacitor devices using coconut shell based activated charcoal electrode
521
Fabrication and characterization of epitaxial Ba0.7Sr0.3TiO3 thin films for optical waveguide applications
522
Fabrication and characterization of epitaxial films of ionic materials
523
Fabrication and characterization of epitaxial Sr0.6Ba0.4Nb2O6/La0.7Sr0.3CoO3 heterostructures
524
Fabrication and characterization of Er3+-doped GeO2–PbO and GeO2–PbO–Bi2O3 glass fibers
525
Fabrication and characterization of eutectic gold–silicon (Au–Si) nanowires
526
Fabrication and characterization of facing-target reactive sputtered polycrystalline TiO2 films
527
Fabrication and Characterization of Fast Ignition Targets
528
Fabrication and characterization of Fe1.90Ti0.10O3 gas sensitive resistors for carbon monoxide
529
Fabrication and Characterization of Fe100-xNix Nanoparticles in the Invar Region
530
Fabrication and characterization of Fe3+-doped titania semiconductor electrodes with p–n homojunction devices
531
Fabrication and characterization of Fe3O4@APTES@PAMAM-Ag highly active and recyclable magnetic nanocatalyst: Catalytic reduction of 4-nitrophenol
532
Fabrication and characterization of Fe3O4-based Cu nanostructured electrode for Li-ion battery
533
Fabrication and characterization of Fe–Ni alloy/nickel ferrite composite nanofibers by electrospinning and partial reduction
534
Fabrication and characterization of ferrimagnetic bioactive glass-ceramic containing BaFe12O19
535
Fabrication and characterization of few-layer graphene Original Research Article
536
Fabrication and characterization of field effect transistors of layered structure consisting of TMTSF and TCNQ
537
Fabrication and characterization of field effect transistors using donor and acceptor stacked layers
538
Fabrication and characterization of field-effect transistor device with C2v isomer of Pr@C82
539
Fabrication and characterization of filled hydrogel particles based on sequential segregative and aggregative biopolymer phase separation
540
Fabrication and characterization of fine-grained barium strontium titanate ceramics by the heterogeneous precipitation method
541
FABRICATION AND CHARACTERIZATION OF FLAME RETARDANT 4 AND POLYDIMETHYLSILOXANE AS SUBSTRATES FOR A LABEL-FREE DNA SENSOR
542
Fabrication and characterization of flexible and high capacitance supercapacitors based on MnO2/CNT/papers
543
Fabrication and characterization of forward osmosis hollow fiber membranes with antifouling NF-like selective layer
544
Fabrication and characterization of fullerene/porphyrin bulk heterojunction solar cells Original Research Article
545
Fabrication and characterization of fullerene-based solar cells containing phthalocyanine and naphthalocyanine dimers
546
Fabrication and characterization of fullerene–Nafion composite membranes
547
Fabrication and characterization of fully ceramic microencapsulated fuels
548
Fabrication and characterization of fully dense Si–C–N ceramics from a poly(ureamethylvinyl)silazane precursor
549
Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites
550
Fabrication and characterization of functionally-graded LSCF cathodes by tape casting
551
Fabrication and characterization of GaAs MIS devices with N-rich PECVD SixNy dielectric
552
Fabrication and characterization of GaInP/GaAs triple barrier resonant tunneling diodes grown by MOCVD
553
Fabrication and characterization of GaN/amorphous Ga2O3 nanocables through thermal oxidation
554
Fabrication and characterization of GaN/InGaN/AlGaN double heterostructure LEDs and their application in luminescence conversion LEDs
555
Fabrication and characterization of GaN/InGaN/AlGaN double heterostructure LEDs and their application in luminescence conversion LEDs
556
Fabrication and characterization of GDC electrolyte/electrode integral SOFC with BaO/Ni-GDC anode
557
Fabrication and characterization of Ge nanocrystalline growth by ion implantation in SiO2 matrix
558
Fabrication and characterization of glass–ceramics materials developed from steel slag waste
559
Fabrication and Characterization of Gliclazide Nanocrystals
560
Fabrication and characterization of gold nanohole electrode arrays
561
Fabrication and characterization of gold/acrylic polymer nanocomposites
562
Fabrication and characterization of graded impedance impactors for gas gun experiments from hot-pressed magnesium and polyethylene powders
563
Fabrication and characterization of graded impedance impactors for gas gun experiments from tape cast metal powders
564
Fabrication and characterization of grafted polymer electrode self modification with activated carbon
565
Fabrication and characterization of grain-oriented bismuth vanadate ceramics
566
Fabrication and characterization of graphene oxide/zinc oxide nanorods hybrid
567
Fabrication and characterization of graphene-reinforced waterborne polyurethane nanocomposite coatings by the sol–gel method
568
Fabrication and characterization of green light emitting diode
569
Fabrication and characterization of gum ghatti-polymethacrylic acid based electrically conductive hydrogels
570
Fabrication and Characterization of Hand-Made 1*12 Splitter Based on Polymer Optical Fiber Made of Polymethyl Methacrylate(Fabrikasi dan Pencirian Pencerai Optik 1*12 Buatan Tangan Berasaskan Gentian Optik Polimer Diperbuat daripada Polimetil Metakrilat)
571
Fabrication and characterization of hardened bodies from Japanese volcanic ash using geopolymerization
572
Fabrication and characterization of heparin functionalized membrane-mimetic assemblies
573
Fabrication and Characterization of Heparin/Collagen Sponge for in Vitro Differentiation of Wharton’s Jelly-Derived Mesenchymal Stem Cells into Hepatocytes
574
Fabrication and characterization of hermetic solid oxide fuel cells without sealant
575
Fabrication and characterization of heteroepitaxial bilayers of La–Ca–Mn–O/Y–Ba–Cu–O
576
Fabrication and characterization of heteropolyacid (H3PW12O40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications
577
Fabrication and characterization of hexagonal boron nitride powder by spray drying and calcining–nitriding technology
578
Fabrication and characterization of hexahistidine-tagged protein functionalized multi-walled carbon nanotubes for selective solid-phase extraction of Cu2+ and Ni2+
579
Fabrication and characterization of hierarchically organized nanoparticle-reinforced nanofibrous composite scaffolds
580
Fabrication and characterization of high curie temperature BiSc1/2Fe1/2O3–PbTiO3 piezoelectric films by a sol–gel process
581
Fabrication and characterization of high solid content Co0.8Ni0.2Fe2O4/PVP composite nanofibers by direct-dispersed electrospinning
582
Fabrication and characterization of high strength Nylon-6/Si3N4 polymer nanocomposite fibers
583
Fabrication and characterization of high-current-density carbon-nanotube cold cathodes
584
Fabrication and characterization of high-density arrays of P3HT nanopillars on ITO/glass substrates
585
Fabrication and characterization of highly ordered phosphorus-doped ZnO nanocombs Original Research Article
586
Fabrication and characterization of highly ordered zirconia nanowire arrays by sol–gel template method
587
Fabrication and characterization of highly porous mullite ceramics
588
Fabrication and characterization of high-resolution AFM tips with high-quality double-wall carbon nanotubes
589
Fabrication and characterization of high-T/sub c/ SQUID magnetometer with damping resistance
590
Fabrication and characterization of hollow cuprous sulfide (Cu2−xS) microspheres by a simple template-free route
591
Fabrication and characterization of hollow spherical boron nitride powders
592
Fabrication and characterization of humidity sensor based on (Li2MoO4)x(CaMoO4)1−x system
593
Fabrication and characterization of hybrid micro/nano-structured hydrophilic titania coatings deposited by suspension flame spraying
594
Fabrication and characterization of hybrid solar cells based on copper phthalocyanine/porous silicon
595
Fabrication and characterization of hybrid structured Al alloy matrix composites reinforced by high volume fraction of B4C particles
596
Fabrication and characterization of hydrophilic poly(lactic-co-glycolic acid)/poly(vinyl alcohol) blend cell scaffolds by melt-molding particulate-leaching method
597
Fabrication and characterization of III–V semiconductor superlattices with sinusoidal compositional modulation
598
Fabrication and characterization of improved PFSA/ePTFE composite polymer electrolyte membranes
599
Fabrication and Characterization of In Situ Synthesized SiC/Al Composites by Combustion Synthesis and Hot Press Consolidation Method
600
Fabrication and characterization of indium sulfide thin films deposited on SAMs modified substrates surfaces by chemical bath deposition
601
Fabrication and characterization of injection molded poly (ε-caprolactone) and poly (ε-caprolactone)/hydroxyapatite scaffolds for tissue engineering
602
Fabrication and characterization of inkjet-printed carbon nanotube electrode patterns on paper Original Research Article
603
Fabrication and characterization of InP nanocrystals embedded in SiO2 matrix by RF magnetron co-sputtering
604
Fabrication and characterization of in-situ TiAl matrix composite with controlled microlaminated architecture based on SiC/Al and Ti system
605
Fabrication and characterization of intergrown Bi4Ti3O12-based thin films using a metal-organic precursor solution
606
Fabrication and characterization of iron oxide nanoparticles reinforced vinyl-ester resin nanocomposites
607
Fabrication and characterization of ITO thin films on heat-resistant transparent flexible clay films
608
Fabrication and characterization of kidney bean (Phaseolus vulgaris L.) protein isolate–chitosan composite films at acidic pH
609
Fabrication and characterization of La-doped HfO2 gate dielectrics by metal-organic chemical vapor deposition
610
Fabrication and characterization of large metallic nanodots arrays for organic thin film solar cells using anodic aluminum oxide templates
611
Fabrication and characterization of large size 6LiF/CaF2:Eu eutectic composites with the ordered lamellar structure
612
Fabrication and characterization of large size 6LiF/CaF2:Eu eutectic composites with the ordered lamellar structure
613
Fabrication and characterization of Li0.5Fe2.5O4 octahedrons via a TEA-assisted route
614
Fabrication and characterization of Li1+x−yNb1−x−3yTix+4yO3 substrates using aqueous tape casting process
615
Fabrication and characterization of Li2TiO3 core–shell pebbles with enhanced lithium density
616
Fabrication and characterization of Li3TaO4 ceramic pebbles by wet process
617
Fabrication and characterization of Li4SiO4 ceramic pebbles by wet method
618
Fabrication and characterization of Li4SiO4 pebbles by melt spraying method
619
Fabrication and characterization of low aberration micrometer-sized electron lenses
620
Fabrication and characterization of low aberration micrometer-sized electron lenses
621
Fabrication and characterization of low cost tubular mineral-based ceramic membranes for micro-filtration from natural zeolite
622
Fabrication and characterization of low temperature (<450 °C) grown p-Ge/n-Si photodetectors for silicon based photonics
623
Fabrication and Characterization of Low-Cost Poly(Vinyl Alcohol) Composite Membrane for Low Temperature Fuel Cell Application
624
Fabrication and characterization of low-temperature SOFC stack based on GDC electrolyte membrane
625
Fabrication and characterization of luminescent self-assembled thin films of europium complex
626
Fabrication and characterization of machinable Si3N4/h-BN functionally graded materials
627
Fabrication and characterization of macroporous flyash ceramic pellets
628
Fabrication and characterization of magnesium–fluorapatite nanocomposite for biomedical applications
629
Fabrication and characterization of magnetic cobalt ferrite/polyacrylonitrile and cobalt ferrite/carbon nanofibers by electrospinning Original Research Article
630
Fabrication and characterization of magnetic Fe3O4–CNT composites Original Research Article
631
Fabrication and characterization of magnetic nanoporous zeolite templated carbon Original Research Article
632
Fabrication and characterization of magnetron sputtered arsenic doped p-type ZnO epitaxial thin films
633
Fabrication and characterization of Meldolaʹs blue/zinc oxide hybrid electrodes for efficient detection of the reduced form of nicotinamide adenine dinucleotide at low potential Original Research Article
634
Fabrication and characterization of mesoporous TiO2/polypyrrole-based nanocomposite for electrorheological fluid
635
Fabrication and Characterization of Mesostructured Silica, HUM-1, and Its Ordered Mesoporous Carbon Replica
636
Fabrication and characterization of metal and semiconductor SmS thin films by rf/dc dual magnetron sputtering
637
Fabrication and characterization of metallic glasses with a specific microstructure for micro-electro-mechanical system applications
638
Fabrication and characterization of metalrGaN contacts
639
Fabrication and characterization of metal-supported solid oxide fuel cells
640
Fabrication and characterization of Mg-doped pencil-shaped ZnO microprisms
641
Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti–6Al–4V surfaces
642
Fabrication and characterization of micro tubular SOFCs for operation in the intermediate temperature
643
Fabrication and characterization of micro-arc oxidized fluoride containing titania films on Cp Ti
644
Fabrication and characterization of micro-dimple array on Al2O3 surfaces by using a micro-tooling
645
Fabrication and characterization of microelectromechanical systems-based gas chromatography column with embedded micro-posts for separation of environmental carcinogens
646
Fabrication and characterization of microencapsulated n-octadecane with different crosslinked methylmethacrylate-based polymer shells
647
Fabrication and characterization of microfluidic liver-on-a-chip using microsomal enzymes
648
Fabrication and characterization of micro-gas sensor for nitrogen oxides gas detection
649
Fabrication and characterization of microgel-impregnated, thermosensitive PNIPAAm hydrogels
650
Fabrication and characterization of microinductors for distributed power converters
651
Fabrication and characterization of microstructured and pH sensitive interpenetrating networks hydrogel films and application in drug delivery field
652
Fabrication and characterization of microtubular and flattened ribbed SOFCs prepared by the multi-dip coating and co-firing
653
Fabrication and characterization of micro-tubular cathode-supported SOFC for intermediate temperature operation
654
Fabrication and characterization of mini alumina ceramic turbine rotor using a tailored gelcasting process
655
Fabrication and characterization of minor actinides bearing fuels obtained by conventional powder metallurgy process
656
Fabrication and characterization of Mn doped SnO2 thin films
657
Fabrication and characterization of Mn-doped CuO thin films by the SILAR method
658
Fabrication and characterization of monodisperse PLGA–alginate core–shell microspheres with monodisperse size and homogeneous shells for controlled drug release
659
Fabrication and characterization of multi phase ceramic composites based on zircon–alumina–magnesia mixtures
660
Fabrication and characterization of multi-filament copper matrix–polyethylene fibres composite wire
661
Fabrication and characterization of multilayered nanoporous platinum films deposited by electroplating and nonionic surfactant molds
662
Fabrication and characterization of multi-walled carbon nanotube incorporated ferromagnetic nanowires with self-formed anti-oxidation layers
663
Fabrication and characterization of multi-walled carbon nanotubes/polymer blend membranes
664
Fabrication and characterization of multi-walled carbon nanotubes-based ink
665
Fabrication and characterization of nano TiO2 thin films at low temperature
666
Fabrication and characterization of nano/amorphous dual-phase FINEMET microwires
667
Fabrication and Characterization of Nanocapsules of PLGA Containing BSA Using Electrospray Technique
668
Fabrication and characterization of nano-composite scaffold of PLLA/silane modified hydroxyapatite
669
Fabrication and characterization of nanocrystalline cobalt oxide thin films
670
Fabrication and characterization of nanocrystalline Mg-substituted fluorapatite by high energy ball milling
671
Fabrication and characterization of nanofibrous tricuspid valve scaffold based on polyurethane for heart valve tissue engineering
672
Fabrication and characterization of nanometer CaP(aggregate)/Al2O3 composite coating on titanium
673
Fabrication and characterization of nanometer CaP(aggregate)/Al2O3 composite coating on titanium
674
Fabrication and Characterization of Nanoporous Co Oxide (Co3O4) Prepared by Simple Sol-gel Synthesis
675
Fabrication and characterization of nanoporous SiO2 ceramics via pyrolysis of silicone resin filled with nanometer SiO2 powders
676
Fabrication and Characterization of Nanostructured Functionally Graded Ni-P Electroless Coating
677
Fabrication and characterization of nanostructured Ni–IrO2 electrodes for water electrolysis
678
Fabrication and characterization of nanostructured Ti6Al4V powder from machining scraps
679
Fabrication and characterization of nanostructured TiO2 and turmeric spent incorporated polystyrene hybrid nano composites
680
Fabrication and characterization of nanostructured TiO2 and turmeric spent incorporated polystyrene hybrid nano composites
681
Fabrication and characterization of neat and aluminium-doped titanium (IV) oxide fibers prepared by combined sol–gel and electrospinning techniques
682
Fabrication and characterization of new Er3+ doped niobium borophosphate glass fiber
683
Fabrication and characterization of new semiconducting nanomaterials composed of natural layered silicates (Na+-MMT), natural rubber (NR), and polypyrrole (PPy)
684
Fabrication and Characterization of Ni(BDC)(TED)_0.5/Polysulfone Mixed Matrix Membrane
685
Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs
686
Fabrication and characterization of NiCoZn–M (M: Ag, Pd and Pt) electrocatalysts as cathode materials for electrochemical hydrogen production
687
Fabrication and characterization of n-In0.4Ga0.6N/p-Si solar cell
688
Fabrication and characterization of NiO/ZnO p–n junctions by pulsed laser deposition
689
Fabrication and characterization of Ni-supported solid oxide fuel cell
690
Fabrication and characterization of Ni–W solid solution alloys via mechanical alloying and pressureless sintering
691
Fabrication and characterization of non-evaporable porous getter films
692
Fabrication and characterization of n-on-n silicon pixel detectors compatible with the Medipix2 readout chip
693
Fabrication and characterization of n-on-n silicon pixel detectors compatible with the Medipix2 readout chip
694
Fabrication and characterization of nonplanar microelectrode array circuits for use in arthroscopic diagnosis of cartilage diseases
695
Fabrication and Characterization of Novel 3D Porous Titanium-6Al-4V Scaffold for Orthopedic Application Using Selective Laser Melting Technique
696
Fabrication and characterization of novel antifouling nanofiltration membrane prepared from oxidized multiwalled carbon nanotube/polyethersulfone nanocomposite
697
Fabrication and characterization of novel biomimetic PLLA/cellulose/hydroxyapatite nanocomposite for bone repair applications
698
Fabrication and characterization of novel composite nanofiltration membranes based on zwitterionic O-carboxymethyl chitosan Original Research Article
699
Fabrication and characterization of novel macroporous cellulose–alginate hydrogels
700
Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite
701
Fabrication and Characterization of Novel Mixed-valence Pentaamminechlororuthenium(III) Hexacyanoruthenate(II) Coordination Compound Self-assembled Film
702
Fabrication and characterization of novel semiconductor nanomechanical structures
703
Fabrication and characterization of novel SiO2-PAMPS/PSF hybrid ultrafiltration membrane with high water flux Original Research Article
704
Fabrication and characterization of n-type aluminum-boron co-doped ZnO on p-type silicon (n-AZB/p-Si) heterojunction diodes
705
Fabrication and characterization of n-ZnO:Eu/p-ZnO:(Ag, N) homojunction by spray pyrolysis
706
Fabrication and characterization of ODS austenitic steels
707
Fabrication and characterization of OLED with Mg complex of 5-chloro-8-hydroxyquinoline as emission layer
708
Fabrication and characterization of OLEDs using MEH-PPV and SWCNT nanocomposites
709
Fabrication and characterization of OLEDs using PEDOT:PSS and MWCNT nanocomposites
710
Fabrication and characterization of ophthalmically compatible hydrogels composed of poly(dimethyl siloxane-urethane)/Pluronic F127
711
Fabrication and characterization of optical biosensors using polymer hydrogel microparticles and enzyme–quantum dot conjugates
712
Fabrication and characterization of optoelectronic near-field probes based on an SFM cantilever design
713
Fabrication and characterization of optoelectronic near-field probes based on an SFM cantilever design
714
Fabrication and characterization of ordered macroporous semiconductors CdS by colloidal crystal template
715
Fabrication and characterization of organic–inorganic perovskite films containing fullerene derivatives
716
Fabrication and characterization of oriented carbon atom wires assembled on gold
717
Fabrication and characterization of ovalbumin films for wound dressing applications
718
Fabrication and characterization of oxygen sensing properties of Dy l23 sensor utilizing hot spot phenomenon
719
Fabrication and characterization of oxygen-diffused titanium for biomedical applications
720
Fabrication and Characterization of pcDNA3.1(+) Location within Chitosan/Nanoparticles Complexes for Enhanced Gene Delivery
721
Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method
722
Fabrication and characterization of Pd/Ag alloy hollow spheres by the solvothermal method
723
Fabrication and characterization of Pd/Nb40Ti30Ni30/Pd/porous nickel support composite membrane for hydrogen separation and purification
724
Fabrication and characterization of PE/MMT nanocomposites via copolymerization of ethylene and in situ formed a-olefins
725
Fabrication and characterization of permeable degradable poly(dl-lactide-co-glycolide) (PLGA) hollow fiber phase inversion membranes for use as nerve tract guidance channels
726
Fabrication and characterization of perovskite CaZrO3 oxide thin films
727
Fabrication and characterization of photocatalytic activity of Fe3O4-doped CdS hollow spheres Original Research Article
728
Fabrication and characterization of photocurable inorganic–organic hybrid materials using organically modified colloidal-silica nanoparticles and acryl resin
729
Fabrication and characterization of photoelectrochemical (PEC) solar cells based on 0.1% indium-doped CdSe0.7Te0.3 thin-film electrode
730
Fabrication and characterization of photonic devices directly written in glass using femtosecond laser pulses
731
Fabrication and characterization of planar-type SOFC unit cells using the tape-casting/lamination/co-firing method
732
Fabrication and characterization of plasma-sprayed HA / SiO2 coatings for biomedical application
733
Fabrication and characterization of PLGA polymeric nanoparticles containing berberine and its cytotoxicity on breast cancer cell (MCF-7)
734
Fabrication and characterization of P–N dual acceptor doped p-type ZnO thin films
735
Fabrication and characterization of polliwog-like Sn/Zn2SnO4 heterostructure nanocrystal and their gas sensing properties
736
Fabrication and characterization of poly (vinyl alcohol)/chitosan blend nanofibers produced by electrospinning method
737
Fabrication and Characterization of Poly Vinyl Alcohol/ Poly Vinyl Pyrrolidone/MnTiO Nanocomposite Membranes for PEM Fuel Cells
738
Fabrication and characterization of poly(3,4-ethylenedioxythiophene)/gold nanocomposite via in-situ redox cycle system
739
Fabrication and characterization of poly(lactic-co-glycolic acid)/polyvinyl alcohol blended hollow fibre membranes for tissue engineering applications
740
Fabrication and characterization of poly(l-lactic acid) 3D nanofibrous scaffolds with controlled architecture by liquid–liquid phase separation from a ternary polymer–solvent system
741
Fabrication and characterization of poly(l-lactic acid) gels induced by fibrous complex crystallization with solvents
742
Fabrication and characterization of poly(l-lactide-co-glycolide) knitted mesh-reinforced collagen–chitosan hybrid scaffolds for dermal tissue engineering
743
Fabrication and characterization of poly(l-lactide-co-glycolide) knitted mesh-reinforced collagen–chitosan hybrid scaffolds for dermal tissue engineering
744
Fabrication and characterization of poly(phenylene oxide)/SBA-15/carbon molecule sieve multilayer mixed matrix membrane for gas separation
745
Fabrication and characterization of poly(vinyl alcohol)/alginate blend nanofibers by electrospinning method
746
Fabrication and characterization of poly(vinyl alcohol)/chitosan hydrogel thin films via UV irradiation
747
Fabrication and characterization of poly(vinyl alcohol)/montmorillonite/poly(styrene sulfonic acid) proton-conducting composite membranes for direct methanol fuel cells
748
Fabrication and characterization of poly(vinylferrocenium) perchlorate/poly(3,4-ethylenedioxythiophene) composite-coated electrode in methylene chloride
749
Fabrication and characterization of poly(γ-glutamic acid)-graft-chondroitin sulfate/polycaprolactone porous scaffolds for cartilage tissue engineering
750
Fabrication and characterization of poly-(ε)-caprolactone and bioactive glass composites for tissue engineering applications
751
Fabrication and characterization of poly[(2-methoxy-5-(2′-ethyl-hexyloxy)phenylene vinylene] (MEH-PPV) Langmuir–Schaefer films and their application as photoelectrochemical cells
752
Fabrication and characterization of polyamide 6,6/organo-montmorillonite nanocomposites with and without a maleated polyolefin elastomer as a toughener
753
Fabrication and characterization of polyamide thin film nanocomposite (TFN) nanofiltration membrane impregnated with TiO2 nanoparticles Original Research Article
754
Fabrication and characterization of polyaniline coated carbon nanofiber for supercapacitor Original Research Article
755
Fabrication and characterization of polyaniline/porous silicon heterojunction
756
Fabrication and characterization of polyaniline/xanthan gum nanocomposite: Conductivity and thermal properties
757
Fabrication and characterization of polyaniline-based gas sensor by ultra-thin film technology
758
FABRICATION AND CHARACTERIZATION OF POLYANILINE-GRAPHENE COMPOSITE AS ELECTRODE IN ELECTROCHEMICAL CAPACITOR
759
Fabrication and Characterization of Polycaprolactone/ Chlorophyllin Sodium Copper Salt Nanofibrous Mats from 2,2,2-Trifluoroethanol Solution by Electrospinning
760
Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution
761
Fabrication and characterization of polycrystalline silicon nanowires with silver-assistance by electroless deposition
762
Fabrication and characterization of poly-d-l-lactide/nano-hydroxyapatite composite scaffolds with poly (ethylene glycol) coating and dexamethasone releasing
763
Fabrication and characterization of polyimide–zeolite L mixed matrix membranes for gas separations
764
Fabrication and Characterization of Polymer Blend Doped with Metal Carbide Nanoparticles for Humidity Sensors
765
Fabrication and Characterization of Polymer Blend Membranes for CO2/CH4 Separation
766
Fabrication and characterization of polymer-based magnetic composite nanotubes and nanorods
767
Fabrication and characterization of polymeric microfiltration membranes using aperture array lithography
768
Fabrication and characterization of polymethylmethacrylate (PMMA) thin film by plasma polymerization used for cell culture
769
Fabrication and characterization of polysilsesquioxanes nanocomposites based chemical sensor
770
Fabrication and Characterization of Polysulfone-Graphene Oxide Mixed Matrix Membranes for the Natural Gas Treatment
771
Fabrication and Characterization of Polysulfone-Zeolite ZSM-5 Mixed Matrix Membrane for Heavy Metal Ion Removal Application
772
Fabrication and characterization of polyvinylidenefluoride-co-hexafluoropropylene (PVDF-HFP) electrospun membranes for direct contact membrane distillation
773
Fabrication and characterization of porous bioceramic composites based on hydroxyapatite and titania
774
Fabrication and Characterization of Porous b-Tricalcium Phosphate Scaffold for Bone Regeneration
775
Fabrication and characterization of porous calcium polyphosphate scaffolds
776
Fabrication and characterization of porous hydroxyapatite granules
777
Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering
778
Fabrication and characterization of porous silver powder prepared by spray drying and calcining technology
779
Fabrication and characterization of porous tricalcium phosphate ceramics
780
Fabrication and characterization of porous ZrO2 with a high volume fraction of fine closed pores
781
Fabrication and characterization of porphyrin dye-sensitized solar cells
782
Fabrication and characterization of positively charged hybrid ultrafiltration and nanofiltration membranes via the in-situ exfoliation of Mg/Al hydrotalcite Original Research Article
783
Fabrication and characterization of potassium–sodium niobate piezoelectric ceramics by spark-plasma-sintering method
784
Fabrication and characterization of PPO/PVP blend carbon molecular sieve membranes for H2/N2 and H2/CH4 separation
785
Fabrication and Characterization of Proton Conductive Membranes Based on Poly(methyl methacrylate-co-maleic anhydride)
786
Fabrication and characterization of pseudo-ceramide-based liposomal membranes
787
Fabrication and characterization of PSi/nanometal hybrid structures by laser for CO gas sensor
788
Fabrication and characterization of Pt intermediate transparent and conducting ITO/Pt/ITO multilayer films Original Research Article
789
Fabrication and characterization of pure and modified Co3O4 nanocatalyst and their application for photocatalytic degradation of eosine blue dye: a comparative study
790
Fabrication and characterization of PVA/WPI nanofibers containing probiotics using electrospinning technique
791
Fabrication and characterization of p-ZnO/n-Zn0.8Cd0.2O/n-ZnO heterojunction
792
Fabrication and characterization of random chopped fiber reinforced reaction bonded silicon carbide composite
793
Fabrication and characterization of raspberry-like PSt/SiO2 composite microspheres via miniemulsion polymerization
794
Fabrication and characterization of reaction-bonded silicon carbide with poly(methyl methacrylate) as pore-forming agent
795
Fabrication and characterization of recyclable carbon nanotube/polyvinyl butyral composite fiber
796
Fabrication and characterization of reference 9Cr and 12Cr-ODS low activation ferritic/martensitic steels
797
Fabrication and characterization of rhodamine 6G entrapped sol–gel film test strip for virtually specific and sensitive sensing of nitrite
798
Fabrication and characterization of rigid magnetic monodisperse microspheres for protein adsorption
799
Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg–Zn–Ca alloy
800
Fabrication and Characterization of Rutile TiO2 Nanocrystals by Water Soluble Precursor
801
Fabrication and characterization of scaffold from cadaver goat-lung tissue for skin tissue engineering applications
802
Fabrication and characterization of Schottky barrier diodes with tetracyanoquinodimethane doped with bis(β-naphthyl)-tetrathiafulvalene
803
Fabrication and characterization of Schottky diodes and thin films based on poly(o-toluidine) deposited by spincoating technique
804
Fabrication and characterization of self-assembled multifunctional coating deposition on a cellulose substrate
805
Fabrication and characterization of self-assembled Nafion–SiO2–ePTFE composite membrane of PEM fuel cell
806
Fabrication and characterization of self-doped poly(aniline-co-anthranilic acid) nanorods in bundles
807
Fabrication and characterization of shape anisotropy AlN/FeCoSiB magnetoelectric composite films
808
Fabrication and characterization of SiC rod-particulate-reinforced reaction-bonded Si3N4 composites
809
Fabrication and characterization of SiC whisker reinforced reaction bonded SiC composite
810
Fabrication and characterization of SiC/MoSi2 composites
811
Fabrication and characterization of SiC/MoSi2 composites
812
Fabrication and characterization of SiCf/SiC composite by CVI using the whiskering process
813
Fabrication and characterization of SiCf/SiC composites produced by the slurry infiltration process
814
Fabrication and characterization of SiCw/MoSi2 composite from COSHSed powder
815
Fabrication and characterization of silicon detectors for use in radiotherapy dosimetry, pre-irradiated by high-energy electrons
816
Fabrication and characterization of silicon detectors for use in radiotherapy dosimetry, pre-irradiated by high-energy electrons
817
Fabrication and characterization of silk fibroin/bioactive glass composite films
818
Fabrication and characterization of silk/forsterite composites for tissue engineering applications
819
Fabrication and characterization of silver inverse opals
820
Fabrication and characterization of silver inverse opals
821
Fabrication and characterization of silver-based solid-state primary batteries
822
Fabrication and characterization of single walled nanotube supercapacitor electrodes with uniform pores using electrophoretic deposition
823
Fabrication and characterization of single-walled carbon nanotube fiber for electronics applications Original Research Article
824
Fabrication and characterization of sintered TiC–SiC composites
825
Fabrication and characterization of SiO2 microcantilever for microsensor application
826
Fabrication and characterization of six electrospun poly(α-hydroxy ester)-based fibrous scaffolds for tissue engineering applications
827
Fabrication and characterization of smooth high aspect ratio zirconia nanotubes
828
Fabrication and characterization of SnO2 and SnS2 nanobiosensor in the Presence of Aspergillus Niger Fungi
829
Fabrication and characterization of sol–gel derived 45S5 Bioglass®–ceramic scaffolds
830
Fabrication and characterization of sol–gel derived hydroxyapatite/zirconia composite nanopowders with various yttria contents
831
Fabrication and characterization of solid state proton conductor (NH4)2SiP4O13–NH4PO3 for fuel cells operated at 150–250 °C
832
Fabrication and characterization of solid-state cells using CuI100—x—(silver ortho/pyrophosphate)x (0less-than-or-equals, slantxless-than-or-equals, slant60) mixed systems as solid electrolytes
833
Fabrication and characterization of solid-state thermal neutron detectors based on hexagonal boron nitride epilayers
834
Fabrication and characterization of solid-state thermal neutron detectors based on hexagonal boron nitride epilayers
835
Fabrication and Characterization of Splitter 3×3 based on Polimer Optical Fibre (POF) with Low Cost Fusion Technique
836
Fabrication and Characterization of Spongy Denuded Amniotic Membrane Based Scaffold for Tissue Engineering
837
Fabrication and characterization of spray dried Al2O3–ZrO2–Y2O3 powders treated by calcining and plasma
838
Fabrication and characterization of sputtered titanium dioxide films
839
Fabrication and characterization of SrZrO3 thin films prepared by sol–gel
840
Fabrication and Characterization of Superhydrophobic Layer of Low Density Polyethylene on Polypropylene Hollow Fiber Membrane
841
Fabrication and Characterization of Superhydrophobic Layer of Low Density Polyethylene on Polypropylene Hollow Fiber Membrane
842
Fabrication and characterization of superhydrophobic poly (vinylidene fluoride) membrane for direct contact membrane distillation Original Research Article
843
Fabrication and characterization of superhydrophobic polypropylene hollow fiber membranes for carbon dioxide absorption
844
Fabrication and characterization of superhydrophobic surface by using water vapor impingement method
845
Fabrication and characterization of superhydrophobic thin films based on TEOS/RF hybrid
846
Fabrication and characterization of superporous cellulose bead for high-speed protein chromatography
847
Fabrication and characterization of surface type Schottky diode hydrogen sensor using polyaniline/porous 3C-SiC
848
Fabrication and characterization of suspended single-walled carbon nanotubes
849
Fabrication and Characterization of Targets for Shock Propagation and Radiation Burnthrough Measurements on Be-0.9 AT. % Cu Alloy
850
Fabrication and characterization of temperature-, pH- and magnetic-field-sensitive organic/inorganic hybrid poly (ethylene glycol)-based hydrogels
851
Fabrication and characterization of tetracyanoquinodimethane/phthalocyanine solar cells
852
Fabrication and characterization of tetrapod-like ZnO nanostructures prepared by catalyst-free thermal evaporation
853
Fabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
854
Fabrication and Characterization of the Green Synthesized Magnetic Chitosan-zinc Nanocomposites: A Reusable and Effective Multifunctional Nanocatalyst for the Reduction of Organic Pollutants
855
Fabrication and characterization of the hierarchical structure for superhydrophobicity and self-cleaning
856
Fabrication and characterization of the hierarchical structure for superhydrophobicity and self-cleaning
857
Fabrication and characterization of the mechanical properties of multi-walled carbon nanotube-reinforced epoxy resins by e-beam irradiation
858
Fabrication and characterization of the Ni–P–Al–W multicomponent coatings
859
Fabrication and characterization of the pentacene thin film transistor with a Gd2O3 gate insulator
860
Fabrication and Characterization of the Ti-6Al-4V/Mg Scaffold
861
Fabrication and characterization of thermal evaporated n-Si/ p-ZnTe thin film heterojunction diodes
862
Fabrication and characterization of thin film electrolytes deposited by RF magnetron sputtering for low temperature solid oxide fuel cells
863
Fabrication and characterization of thin nano-hydroxyapatite coatings on titanium
864
Fabrication and characterization of thin Nb2O5 blocking layers for ionic liquid-based dye-sensitized solar cells
865
Fabrication and characterization of thin ΔE detectors for spectroscopic application
866
Fabrication and characterization of thin ΔE detectors for spectroscopic application
867
Fabrication and characterization of three-dimensional carbon electrodes for lithium-ion batteries
868
Fabrication and characterization of three-dimensional cellular-matrix composites reinforced with woven carbon fabric
869
Fabrication and characterization of three-dimensional macroscopic all-carbon scaffolds Original Research Article
870
Fabrication and characterization of three-dimensional nanofiber membrance of PCL–MWCNTs by electrospinning
871
Fabrication and characterization of TiB2/TiC and tungsten co-sputtered wear coatings
872
Fabrication and characterization of TiC/Al composites
873
Fabrication and characterization of TiC/Al composites
874
Fabrication and characterization of TiC-particle-reinforced MoSi2 composites
875
Fabrication and characterization of Ti–Cu clad materials by indirect extrusion
876
Fabrication and characterization of TiO2/whey protein isolate nanocomposite film
877
Fabrication and characterization of TiO2–epoxy nanocomposite
878
Fabrication and characterization of TiO2–ZnO composite nanofibers
879
Fabrication and characterization of titania inverse opals using supercritical carbon dioxide
880
Fabrication and characterization of transparent p–n and p–i–n heterojunctions prepared by spray pyrolysis technique: Effect of post-annealing process and intrinsic middle layer
881
Fabrication and characterization of TS-1 films on α-Al2O3 substrates using TiCl3 as titanium source
882
Fabrication and characterization of tunable polysaccharide hydrogel blends for neural repair
883
Fabrication and characterization of tungsten and graphite based PFC for divertor target elements of ITER like tokamak application
884
Fabrication and characterization of ultra-fine grained tungsten by resistance sintering under ultra-high pressure
885
Fabrication and characterization of ultrafine WC–8Co–xCeB6 cemented carbides
886
Fabrication and characterization of ultra-high resolution multilayer-coated blazed gratings
887
Fabrication and characterization of ultra-high resolution multilayer-coated blazed gratings
888
Fabrication and characterization of ultra-thin NbN hot electron bolometer for near infrared single photon detection
889
Fabrication and characterization of ultra-thin NbN hot electron bolometer for near infrared single photon detection
890
Fabrication and characterization of uranium–thorium–zirconium hydrides
891
Fabrication and characterization of U-shaped fiber-optic pH probes
892
Fabrication and characterization of vacuum plasma sprayed W/Cu-composites for extreme thermal conditions
893
Fabrication and characterization of vertically aligned ZnMgO/ZnO nanowire arrays
894
Fabrication and Characterization of Visible Light active Fe-TiO 2 Nanocomposites as Nanophotocatalyst
895
Fabrication and characterization of W–15Cu composite powders by a novel mechano-chemical process
896
Fabrication and characterization of water-based polyurethane/polyaniline conducting blend films
897
Fabrication and characterization of well-dispersed single-walled carbon nanotube/polyaniline composites
898
Fabrication and characterization of WO3 flocky microspheres induced by ethanol
899
Fabrication and characterization of Y2O3 stabilized ZrO2 films deposited with aerosol-assisted MOCVD
900
Fabrication and characterization of Y-Ba-Cu-Oxide whisker
901
Fabrication and characterization of YSZ/Ni-YSZ bi-layered composites using thermoplastic coextrusion
902
Fabrication and characterization of YVO4:Eu3+ nanomaterials by the micro-wave technique
903
Fabrication and characterization of zinc oxide nanoparticle coated magnetic iron oxide: Effect of S-layers adsorption on surface of oxide
904
Fabrication and characterization of zinc oxide-decorated titania nanoporous by electrochemical anodizing-chemical bath deposition techniques: visible light active photocatalysts with good stability
905
Fabrication and characterization of zinc phosphate passivation layers for ZnO-based varistor
906
Fabrication and Characterization of Zinc Sulfide Nanoparticles and Nanocomposites Prepared via a Simple Chemical Precipitation Method
907
Fabrication and characterization of zirconium hydroxide-carboxymethyl cellulose sodium/plasticized Trichosanthes Kirilowii starch nanocomposites
908
Fabrication and characterization of ZnO and ZnMgO nanostructures grown using a ZnO/ZnMgO compound as the source material
909
Fabrication and characterization of ZnO branched nanorods and ZnO/NiO heterojunction electrodes by chemical solution method
910
Fabrication and characterization of ZnO comb-like nanostructures
911
Fabrication and characterization of ZnO modified bioactive glass nanoparticles
912
Fabrication and characterization of ZnO nanowire transistors with organic polymer as a dielectric layer
913
Fabrication and characterization of ZnO nanowires and nanodiscs grown in modified thermal evaporation set-up
914
Fabrication and characterization of ZnO-coated multi-walled carbon nanotubes with enhanced photocatalytic activity
915
Fabrication and characterization of ZnO-doped Nd(Co1/2Ti1/2)O3 thin films prepared by rf magnetron sputtering
916
Fabrication and characterization of ZnTPP:PCBM bulk heterojunction (BHJ) solar cells Original Research Article
917
Fabrication and characterization of ZnxCd1−xS nanoparticles in chitosan alginate nanocomposite films
918
Fabrication and characterization of Zn–ZnO core–shell microspheres from nanorods
919
Fabrication and characterization of β-Ga2O3 optical nanowires
920
Fabrication and characterization of γ-Al2O3–clay composite ultrafiltration membrane for the separation of electrolytes from its aqueous solution
921
FABRICATION AND CHARACTERIZATION OFHIGH PERFORMANCE CERAMIC MEMBRANE HAVINGNANOMETRE PORES
922
Fabrication and characterizations of a novel drug delivery device liposomes-in-microsphere (LIM)
923
Fabrication and characterizations of a polymer hybrid OA/MA/St-TiO2
924
Fabrication and characterizations of biodegradable jute reinforced soy based green composites
925
Fabrication and characterizations of crosslinked porous polymer films with varying chemical compositions
926
Fabrication and Charge Modification of Ceramic Membranes Using Copper Nanoparticles for Desalination
927
Fabrication and charge/discharge behaviour of some lithium solid polymer electrolyte cells
928
Fabrication and chemical surface modification of mesoporous silicon for biomedical applications
929
Fabrication and CO gas-sensing properties of Pt-functionalized Ga2O3 nanowires
930
Fabrication and CO2 separation performance of carbon membranes doped with TiO2 nanoparticles
931
Fabrication and comparison of 3D Cf/ZrC–SiC composites using ZrC particles/polycarbosilane and ZrC precursor/polycarbosilane
932
Fabrication and comparison of highly efficient Cu incorporated TiO2 photocatalyst for hydrogen generation from water
933
Fabrication and comparison of PP (blend)-based (nano)composites—Effect of PP matrix flow property
934
Fabrication and compression properties of functionally graded foam with uniform pore structures consisting of dissimilar A1050 and A6061 aluminum alloys
935
Fabrication and compressive strength of porous hydroxyapatite scaffolds with a functionally graded core/shell structure
936
Fabrication and conductance characterization of single C60 molecular junction in solutions
937
Fabrication and configuration of carbon nanotube probes in atomic force microscopy
938
Fabrication and consolidation behavior of Al 6061 nanocomposite powders reinforced by multi-walled carbon nanotubes
939
FABRICATION AND CONTACTING INDIVIDUAL GOLD NANOWIRES
940
Fabrication and corrosion behavior of Si/HA nano-composite coatings on biodegradable Mg–Zn–Mn–Ca alloy
941
Fabrication and corrosion resistance of calcium phosphate glass-ceramic coated Mg alloy via a PEG assisted sol–gel method
942
Fabrication and corrosion resistance of HVOF-sprayed Ni2Si intermetallic compound
943
Fabrication and critical current density in 16-filament stainless steel/Fe/MgB2 square wire
944
Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures
945
Fabrication and crystallization behaviors of sputtered Ni–Cu–P films on tool steel
946
Fabrication and current-drive of SiGe/Si Micro-origami epitaxial MEMS device on SOI substrate
947
Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools
948
Fabrication and cyto-compatibility of Fe3O4/SiO2/graphene–CdTe QDs/CS nanocomposites for drug delivery
949
Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules
950
Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays
951
Fabrication and degradation behavior of micro-arc oxidized biomedical magnesium alloy wires
952
Fabrication and Degradation of Polyperoxides by a Radical Chain Process under Mild Conditions
953
Fabrication and design aspects of high-temperature compact diffusion bonded heat exchangers
954
Fabrication and design of multi-layered radar absorbing structures of MWNT-filled glass/epoxy plain-weave composites
955
Fabrication and development of interfacial polymerized thin-film composite nanofiltration membrane using different surfactants in organic phase; study of morphology and performance
956
Fabrication and device characteristics of strained-Si-on-insulator (strained-SOI) CMOS
957
Fabrication and dielectric properties of barium titanate-based glass ceramics for tunable microwave LTCC application
958
Fabrication and dielectric properties of oriented polyvinylidene fluoride nanocomposites incorporated with graphene nanosheets
959
Fabrication and dielectric properties of the BaTiO3–polymer nano-composite thin films
960
Fabrication and dielectric properties of transparent PZN–BT ceramic
961
Fabrication and dielectric property of ferroelectric PLZT films grown on metal foils
962
Fabrication and diffusion barrier properties of nanoscale Ta/Ta-N bi-layer
963
Fabrication and direct bonding of photosensitive multicomponent silicate glasses for lossless planar waveguide splitters
964
Fabrication and dissolution behavior of hollow hydroxyapatite microspheres intended for controlled drug release
965
Fabrication and distribution characteristics of polyurethane/single-walled carbon nanotube composite with anisotropic structure
966
FABRICATION AND EFFECT OF SULFONATED POLY (ETHER ETHER KETONE) WITH CLOISITE15A® NANOCLAYS FOR MICROBIAL FUEL CELL APPLICATION
967
Fabrication and effective thermal conductivity of multi-walled carbon nanotubes reinforced Cu matrix composites for heat sink applications
968
Fabrication and efficient photocatalytic activity of porous CdS-pillared tetratitanate nanohybrid
969
Fabrication and efficient photocatalytic degradation of methylene blue over CuO/BiVO4 composite under visible-light irradiation
970
Fabrication and Efficient Photochromism of the Mixed Langmuir–Blodgett Films of a Watermiscible Azobenzene Amphiphile and Long-chain Alkylammoniums
971
Fabrication and efficient visible light-induced photocatalytic activity of Bi2WO6/BiVO4 heterojunction
972
Fabrication and elastic properties of InAs freestanding structures based on InAs/GaAs(1 1 1)A heteroepitaxial systems
973
Fabrication and electric capacitive behavior of hetero-junction carbon nanoclusters by using secondary chemical vapor deposition
974
Fabrication and electric measurements of nanostructures inside transmission electron microscope
975
Fabrication and electric measurements of nanostructures inside transmission electron microscope
976
Fabrication and electric properties of PZN-based ceramics using modified columbite method
977
Fabrication and electrical characterisation of strontium and titanium-doped lanthanum scandate
978
Fabrication and electrical characteristics of ferredoxin adsorbed poly-l-lysin/11-MUA hetero-self-assembly layer
979
Fabrication and electrical characteristics of organic thin film transistor using π-conjugated dendrimer
980
Fabrication and electrical characteristics of piezoelectric PMN–PZN–PZT ceramic transformers
981
Fabrication and electrical characterization of a MOS memory device containing self-assembled metallic nanoparticles
982
Fabrication and electrical characterization of p-Sb2S3/n-Si heterojunctions for solar cells application
983
Fabrication and electrical characterization of Schottky diode based on 2-amino-4, 5-imidazoledicarbonitrile (AIDCN)
984
Fabrication and electrical characterization of nanocrystalline ZnO/Si heterojunctions
985
Fabrication and electrical conductivity of suspended carbon nanofiber arrays Original Research Article
986
Fabrication and Electrical Properties of Cyano Acrylate Terpolymer Films for Insulator Application
987
Fabrication and electrical properties of field effect transistor based on ferroelectric insulator and pentacene film
988
Fabrication and electrical properties of fullerene/phthalocyaninatometal Langmuir-Blodgett films
989
Fabrication and electrical properties of graphene nanoribbons
990
Fabrication and electrical properties of lead zirconate titanate thick films by the new sol–gel method
991
Fabrication and electrical properties of Li3PO4-based composite electrolyte films
992
Fabrication and electrical properties of metal-coated acrylate rubber microspheres by electroless plating
993
Fabrication and electrical properties of ordered two-dimensional hollow ZnO shells’ arrays Original Research Article
994
Fabrication and electrical properties of Pb(Co1/3Nb2/3)O3 ceramics
995
Fabrication and electrical properties of polycrystalline Si films on glass substrates
996
Fabrication and electrical properties of proton conducting polymer hybridized with apatite compounds
997
Fabrication and electrical properties of Si-based La10−xBix(SiO4)6O3 apatite ionic conductor
998
Fabrication and electrical properties of textured (Na,K)0.5Bi0.5TiO3 ceramics by reactive-templated grain growth
999
Fabrication and electro chemical properties of poly vinyl alcohol/para toluene sulfonic acid membranes for the applications of DMFC
1000
Fabrication and electrocatalytic application of functionalized nanoporous carbon material with different transition metal oxides
