بر اساس عنوان

1
A study on important factors influencing innovation in service: A case study of hotel industry
2
A study on important factors influencing innovation on computer hardware equipment: An empirical investigation using structural equation modeling
3
A study on important factors influencing on the effectiveness of futures research, training and employment
4
A study on important factors influencing on the success of human resources management
5
A study on improvement of durability of reinforced concrete structures mixed with Natural Inorganic Minerals
6
A STUDY ON IMPROVING INFORMATION PROCESSING ABILITIES BASED ON PBL
7
A study on improving physiological and psychological personalities of the students by Vethathiri Maharishi's nine-center meditation using electroencephalography
8
A STUDY ON IMPROVING READING COMPREHENSION SKILL IN TRANSLATION TRAINING
9
A Study on Improving the Blades of a Three-Blade Horizontal Axis Wind Turbine for Agricultural Areas Using a Laboratory Made Model
10
A study on improving the design of hybrid stress-ribbon bridges and their aerodynamic stability
11
A STUDY ON IMPROVING THE FUNCTIONAL PROPERTIES OF CREAM
12
A study on in situ growth of TaC whiskers in Al2O3 matrix powder for ceramic cutting tools
13
A study on in vitro and in vivo bioactivity of HA/45S5 composite films by pulsed laser deposition
14
A study on in vitro degradation behavior of a poly(glycolide-co-l-lactide) monofilament
15
A Study on Index Based Analysis of Users of Internet Traffic Sharing In Computer Networking
16
A study on indigenous housing developers in Malaysia
17
A Study on Industrial Waste Effluents and Their Management at Selected Food and Beverage Industries of Bangladesh
18
A study on influence factors of small punch creep test by experimental investigation and finite element analysis
19
A study on influence of borax to polyester insulators
20
A study on influence of heat input variation on microstructure of reduced activation ferritic martensitic steel weld metal produced by GTAW process
21
A study on influence of shielding gas composition on toughness of flux-cored arc weld of modified 9Cr–1Mo (P91) steel
22
A study on influencing factors on brand loyalty: A case study of Mobile industry
23
A Study on Information Served by Sport Tourism Staff (Caddies) to the Golfers for Developing Instruction Package
24
A study on inhibitory effect of ethanolic extract of the Pistacia lentiscus on acetylcholinesterase activity
25
A study on Inhibitory Effects of Titanium Dioxide Nanoparticles and its Photocatalytic Type on Staphylococcus aureus, Escherichia coli and Aspergillus flavus
26
A study on initial contact detection for precision micro-mold and surface generation of vertical side walls in micromachining
27
A study on initial oxidation of Si 100/-2=1 surfaces by coaxial impact collision ion scattering spectroscopy
28
A Study on Injection Moulding of Two Different Pottery Bodies
29
A STUDY ON INNOVATIVE STRATEGIES TO GROWTH OF INDIAN HEALTH INSURANCE SECTOR
30
A Study on Input Demands for Wheat, Barley and Rye Production in Erzurum Province
31
A study on insertion/removal kinetics of lithium ion in LiCrxMn2−xO4 by using powder microelectrode
32
A study on in-situ synthesis of TiB2–SiC ceramic composites by reactive hot pressing
33
A study on integral transforms of the generalized Lommel-Wright function
34
A Study on Intelligent Authorship Methods in Persian Language
35
A Study on Intelligent Ceramics
36
A study on interaction control for seismic response of parallel structures
37
A study on interfacial mechanisms and structure of poly(ethylene-co-methacrylic acid)/copper with reflection–absorption infrared spectroscopy
38
A study on interleaving versus segmentation
39
A study on intermittency phenomena in the impeller stream via digital particle image velocimetry (DPIV)
40
A study on interval-valued generalized fuzzy n-normed linear space
41
A Study on Intuitionistic Fuzzy and Normal Fuzzy M-Subgroup, M-Homomorphism and ‎Isomorphism‎
42
A Study on Inventory Modeling Through Matrices
43
A study on inventory replenishment policies in a two-echelon supply chain system
44
A study on investigating patient satisfaction of medical centers using Taiwan customer satisfaction index in Taiwan
45
A STUDY ON INVESTMENT DECISIONS OF A COMMON MAN IN PUNE CITY
46
A study on investment problem in chaos environment
47
A study on investors’ personality characteristics and behavioral biases: Conservatism bias and availability bias in the Tehran Stock Exchange
48
A Study on Inviscid Flow with a Free Surface over an Undulating Bottom
49
A Study on Inviscid Flow with a Free Surface over an Undulating Bottom
50
A Study on in-vitro Transdifferentiation of Rat Bone Marrow Stromal Cells into Neuroepithelial-Like Cells
51
A study on ion initiated photomultiplier afterpulses
52
A study on ion initiated photomultiplier afterpulses
53
A study on ionic diffusion towards self-affine fractal electrode by cyclic voltammetry and atomic force microscopy
54
A study on ionic interactions in chitosan–oxalic acid polymer electrolyte membranes
55
A study on iron loss analysis method considering the harmonics of the flux density waveform using iron loss curves tested on Epstein samples
56
A study on Isatis suspension trap efficiency; Advantages and disadvantages
57
A Study on Islam in Brazil: Shiite Cultural Centers in the Creation of the Dialogue of Coexistence in Social Networks
58
a study on isolation and molecular identification of bordetella avium from iranian commercial and backyard broiler turkeys within 2016-2018
59
A study on isothermal kinetics of thermal decomposition of cobalt oxalate to cobalt
60
A STUDY ON JOB SATISFACTION AMONG SPECIAL EDUCATION TEACHERS
61
A study on kerf and material removal rate in wire electrical discharge machining based on Taguchi method
62
A STUDY ON KHACHATURIAN VIOLIN CONCERTO
63
A study on kinetics of static and metadynamic recrystallization during hot rolling
64
A study on Langevin equation with three different fractional orders
65
A Study on Language Learning Strategy Use of Young Turkish Learners
66
A study on large amplitude vibration of multilayered graphene sheets
67
A study on large scale cultivation of Microcystis aeruginosa under open raceway pond at semi-continuous mode for biodiesel production
68
A study on laser bending of tailor machined blanks with various irradiating schemes
69
A study on laser cleaning and pulsed gas tungsten arc welding of Ti–3Al–2.5V alloy tubes
70
A study on laser touch dressing of electroplated diamond wheels using pulsed picosecond laser sources
71
A Study on Latent Equine Salmonellosis Based on Phenotypic and Molecular Methods in Kurdistan Province of Iran
72
A study on latent heat storage exchangers with the high-temperature phase-change material
73
A study on lead adsorption by Mucor rouxii biomass Original Research Article
74
A study on Leishmania infection rate among Phlebotomus spp. collected from Abardejh district, Iran
75
A study on LiFePO4 and its doped derivatives as cathode materials for lithium-ion batteries
76
A study on ligand-coupling reactions of imidoyl palladium complexes
77
A study on light collection of small scintillating crystals
78
A study on light collection of small scintillating crystals
79
A study on limited-cycle scheduling problem with multiple periods q
80
A study on linear and nonlinear Schrodinger equations by the variational iteration method
81
A study on lipid content and fatty acid of breast milk and its association with mother’s diet composition
82
A study on lipid profile and apolipoprotein levels in psoriatic patients
83
A Study on Lipid Removal from Yeast Homogenate by Chemical Pretreatment
84
A study on local photometric models and their application to robust tracking
85
A study on local properties of Fourier series Original Research Article
86
A Study on Local Static Hold-up in a Rotary Disc Contactor Liquid-liquid Extraction Column; Part I: Single Drop Experiments
87
A study on logit assignment which excludes all cyclic flows
88
A Study on Longevity Factors for the New and Old Government Pension Policies in Malaysia
89
A study on low cost-high conducting fluorine and antimony-doped tin oxide thin films
90
A study on low magnetic permeability gas tungsten arc weldment of AISI 316LN stainless steel for application in electron accelerator
91
A study on lowering the detection limit with solid-state lead-selective electrodes
92
A study on luminous efficacy of global radiation under clear sky conditions in Athens, Greece
93
A STUDY ON LUNGWORMS OCURENCE IN FARM-BRED SHEP FROM NORTH BOHEMIA (CZECH REPUBLIC)
94
A study on lymphocyte activation in maedi-visna virus induced pneumonia
95
A study on lymphocyte activation in maedi-visna virus induced pneumonia
96
A study on machinability of Al/SiC-MMC
97
A study on machine calibration techniques
98
A Study on Macrofungal diversity of Bozyazı Province (Mersin), Turkey
99
A Study on Main and Lateral Bending Angles in Laser Tube Bending Process
100
A study on making a long-term improvement in the national energy efficiency and GHG control plans by the AHP approach
101
A Study On Malaysian Language Learners’ Perception Towards Learning Arabic Via Online Games
102
A study on management of corporate cash in consumer durable sector
103
A study on management performance of Taiwan high technology industry - the Hsinchu Science Park experience
104
A STUDY ON MANAGEMENT PRACTICES OF ENTREPRENEURS IN INFORMAL SECTOR - WITH SPECIAL REFERENCE TO DINDIGUL DISTRICT, TAMILNADU
105
A study on managing the performance requirements of a distributed service delivery software system
106
A study on manufacturing technology for an inclined polygon mirror
107
A STUDY ON MARKET MAPPING OF HEAVY COMMERCIAL VEHICLE WITH SPECIAL REFERENCE TO TATA MOTORS (TRUCKS)
108
A study on martensitic and austenitic steels after exposure in mercury at 573 K up to 5000 h
109
A study on martensitic phase transformation in 9Cr–1W–0.23V–0.063Ta–0.56Mn–0.09C–0.02N (wt.%) reduced activation steel using differential scanning calorimetry
110
A study on mass transfer–reaction kinetics of NO absorption by using UV/H2O2/NaOH process
111
A study on material damping of 0° laminated composite sandwich cantilever beams with a viscoelastic layer
112
A study on maxima and inverted peaks in cyclic voltammetry. Electrochemical reduction of pyridine-4-aldoxime at an HMDE
113
A study on meaning processing of dialogue with an example of development of travel consultation system
114
A study on measuring the quality of university website
115
A study on mechanical and microstructure characteristics of the STS304L butt joints using hybrid CO2 laser-gas metal arc welding
116
A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials
117
A study on mechanical properties and flow-induced vibrations of coil-shaped holddown spring Original Research Article
118
A study on mechanical properties of carbon fiber reinforced plastics by three-point bending testing and transverse static response
119
A study on mechanism of nano-cutting single crystal silicon
120
A study on mechanism of voltage collapse based on the theory of transversality of equilibrium points
121
A study on mechanisms of nitrous oxide formation in post-combustion flue gases
122
A STUDY ON MECHANIZATION OF AERATION IN TURFGRASS
123
A study on mechanochemical behavior of CaO–P2O5–CaF2–ZrO2 system to produce fluorapatite–zirconia composite nanopowders
124
A study on mediating role of organizational learning on relationship between market orientation and organizational performance
125
A study on melt processing and thermal properties of fluoroelastomer nanocomposites
126
A Study on Membrane Bioreactor for Water Reuse from the Effluent of Industrial Town Wastewater Treatment Plant
127
A study on membrane morphology by digital image processing
128
A study on mental disorder in serial killers
129
A Study on Mercury-Resistant Bacteria Isolated from a Gold Mine in Pongkor Village, Bogor, Indonesia
130
A Study on Merits and Demerits of Two Main Gene Silencing Techniques in Mice
131
A study on methane–air premixed flames interacting with syngas–air premixed flames
132
A study on methanol steam reforming to CO2 and H2 over the La2CuO4 nanofiber catalyst
133
A study on microgrinding of brittle and difficult-to-cut glasses using on-machine fabricated poly crystalline diamond (PCD) tool
134
A study on micro-grooving characteristics of planar lightwave circuit and glass using ultrasonic vibration cutting
135
A study on microhardness and tribological behavior of carbon nanotubes reinforced AMMA-CNTs copolymer nanocomposites
136
A study on micro-hole machining of polycrystalline diamond by micro-electrical discharge machining
137
A study on microstructural changes in Ti(CN)–NbC–Ni cermets
138
A study on microstructural changes in Ti(CN)–NbC–Ni cermets
139
A study on microstructure and flame erosion mechanism of a graded Ni–Cr–B–Si coating prepared by laser cladding
140
A study on microstructure and mechanical properties of Al 6061–TiB2 in-situ composites
141
A study on microstructure and properties of calcium phosphate coatings processed using ion beam assisted deposition on heated substrates
142
A Study on microstructure and service property of Ni3Al base alloy irradiated by intense pulsed ion beams
143
A study on microstructure and toughness of copper alloyed and austempered ductile irons
144
A study on microstructures and properties of P/M valve seats of hot forging by laser irradiation
145
A study on mild-to-severe wear transition due to inconformity of wear-induced shape
146
A STUDY ON MILLIMETER-WAVE IMAGING OF CONCEALED OBJECTS: APPLICATION USING BACK-PROJECTION ALGORITHM
147
A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA)
148
A STUDY ON MIXED CONVECTIVE, MHD FLOW FROM A VERTICAL PLATE EMBEDDED IN NON-NEWTONIAN FLUID SATURATED NON- DARCY POROUS MEDIUM WITH MELTING EFFECT
149
A Study on Mixed Convective, MHD Flow from a Vertical Plate Embedded in Non-Newtonian Fluid Saturated Non- Darcy Porous Medium with Melting Effect
150
A Study on Mixed Convective, MHD Flow from a Vertical Plate Embedded in Non-Newtonian Fluid Saturated Non- Darcy Porous Medium with Melting Effect
151
A study on mobility degradation in nMOSFETs with HfO2 based gate oxide
152
A study on mode of collapse of varying wall thickness metallic frusta subjected to axial compression
153
A study on model-based error rate estimation for automatic speech recognition
154
A study on modeling and performance assessment of a heat pump system for utilizing low temperature geothermal resources in buildings
155
A study on modeling of human spatial behavior using multi-agent technique
156
A STUDY ON MODELING THE BRAND PERSONALITY AND TESTING THE PERSONALITY CONGRUENCE BETWEEN AUTOMOBILE BRANDS AND THEIR CONSUMERS IN INDIA
157
A study on modeling the dynamics of statistically dependent returns
158
A study on molecular characterization of macrolide resistance mechanism among isolates of Streptococcus pneumoniae from the southern Marmara region of Turkey, as well as resistance to macrolides and penicillin in these isolates
159
A Study on molecular characterization of Razi Bacillus anthracis Sterne 34F2 substrain in Iran
160
A study on mono-, bis- and tris-N-functionalized 1,4,7-triazacyclononane with benzimidazolyl groups and their nickel(II) complexes
161
A study on monobloc tube drawing for steering input shaft
162
A study on morphology control and optical properties of ZnO nanorods synthesized by microwave heating
163
A Study on Morpho-Syntactic Patterns: A Cohesive Device in Some Persian Live Sport Radio and TV Talks
164
A Study on Muhammad Iqbal’s Framework of Ijtihad
165
A study on multi-agent supply chain framework based on network economy
166
A Study on Multi-defect Constrained Bendability of Thin-walled Tube NC Bending Under Different Clearance
167
A study on multidimensional time series model of individual age’s measurement in Castanopsis kawakamii population
168
A study on multifunctional wool textiles treated with nano-sized silver
169
A Study on Multiple Tuned Liquid Column Ball Dampers (MTLCBDs)
170
A study on multivariable process control using message passing across embedded controllers
171
A study on musculoskeletal disorders and personal and occupational risk factors among surgeons
172
A study on mutual interaction between atomistic and macroscopic phenomena during electrochemical processes using coupled finite difference – kinetic Monte Carlo model: Application to potential step test in simple copper sulfate bath
173
A study on mutual interaction between atomistic and macroscopic phenomena during electrochemical processes using FD–KMC model: Application to CV test in simple copper sulfate bath
174
A study on Mycoplasma agalactiae and Chlamydophila abortus in aborted ovine fetuses in Sistan and Baluchestan region, Iran
175
A Study on Mycoplasmal and Viral Infections in Bovine Keratoconjunctivitis
176
A study on nano-deformation behavior of rheo-formed Al–Si alloy based on depth-sensing indentation with three-dimensional surface analysis
177
A study on nanostructured laminated plates behavior under low-velocity impact loadings
178
A study on nanotube–substrate interaction effect for fullerene-shuttle-memory based on nanopeapod
179
A study on natural radiation exposure in different realistic living rooms
180
A study on NDE method of thermal aging of cast duplex stainless steels Original Research Article
181
A study on neck pain and low back pain among the undergraduate students of a medical college in Bhopal, India
182
A study on new market development using a hybrid of QFD and ANP
183
A study on new phase transitions in Cs2CaCl4·2H2O single crystals by observation of 133Cs NMR Original Research Article
184
A Study on News Anchors’ Meta-Language and Non-Verbal Factors and their Impact on Audiences
185
A study on nighttime–daytime PM10 concentration and elemental composition in relation to atmospheric dispersion in the urban area of Milan (Italy)
186
A study on NiTiNbCo shape memory alloy
187
A study on nitric oxide, β-adrenergic receptors and antioxidant status in the polymorphonuclear leukocytes from the patients of depression
188
A study on non-isothermal kinetics of the thermal decompositions of β-manganese dioxide
189
A study on non-isothermal transformation kinetics: Application to the crystallization of the Ge0.18Sb0.23Se0.59 glassy alloy
190
A STUDY ON NONLINEAR BEHAVIOR AND SEISMIC DAMAGE ASSESSMENT OF CONCRETE ARCH DAM-RESERVOIRFOUNDATION SYSTEM USING ENDURANCE TIME ANALYSIS
191
A Study on Numerical Algorithms for Differential Equations in Two Cases q-Calculus and (p,q)-Calculus
192
A study on numerical simulation of hydroforming of aluminum alloy tube
193
A study on numerical simulations and experiments for mass transfer in bubble mode absorber of ammonia and water
194
A study on nurses’ viewpoint about methods of free visit in intensive care units in Besat hospital affiliated to Kurdistan University of Medical Sciences, Iran, 2015-2016
195
A study on nutritive of Thai foods
196
A study on occupational stress experienced by private and public banks employees in Quetta City
197
A STUDY ON ONBOARDING PROCESS IN SIFY TECHNOLOGIES, CHENNAI
198
A study on on-line learning neural network for prediction for rolling force in hot-rolling mill
199
A study on open circuit voltage reduction as a main drawback of Zn–polyaniline rechargeable batteries
200
A study on operation under faults with the single-phase SR generator
201
A study on OPG/RANK/RANKL axis in osteoporotic bile duct-ligated rats and the involvement of nitrergic and opioidergic systems
202
A study on optical device alignment system using ultra precision multi-axis stage
203
A study on optimal compensation cutting for an aspheric surface using the Taguchi method
204
A study on optimality and duality theorems of nonlinear generalized disjunctive fractional programming
205
A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads
206
A study on optimum insulation thicknesses of external walls in hot summer and cold winter zone of China
207
A Study on Oral Health of Children with Cardiac Diseases in Mashhad, Iran in 2004
208
A Study on Orbit Determination by Using the Data of Crossovers from Satellite-borne Altimeter
209
A Study on Organizational Culture, Performance, and Technological Adoption Behaviours of Malaysian Food-Processing SMEs
210
A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers
211
A study on organizational entrepreneurship on economic growth
212
A study on organotin levels in Canadian drinking water distributed through PVC pipesa
213
A Study on Ovine Muscle Development
214
A study on P(AM-DMDA) hydrophobically associating water-soluble copolymer
215
A study on p16, pRb, cdk4 and cyclinD1 expression in non-small cell lung cancers
216
A study on packaging factors influencing on export development
217
A Study on Pakdasht’s Schools from Complexity, Centrality and Formality Perspective
218
A study on pancreatic cancer in Chennai (Madras), India
219
A study on parameters of potential cocoa butter analogue synthesis from camel hump by lipase-catalysed interesterification in supercritical CO2 using response surface methodology
220
A study on parametrization of orography-related momentum fluxes in a synoptic-scale NWP model
221
A study on partially biodegradable microparticles as carriers of active glycolipids
222
A study on partially protonated titanate nanotubes: Enhanced thermal stability and improved photocatalytic activity
223
A study on partially used recycled coarse aggregate cement concrete
224
A Study on Pathogenicity of Bacteria Carried by Pine Wood Nematodes
225
A Study on Patients with Cerebral Palsy
226
A study on PCB, PCDD/PCDF industrial contamination in a mixed urban-agricultural area significantly affecting the food chain and the human exposure. Part I: Soil and feed Original Research Article
227
A study on PCR-RFLP of Giardia duodenalis in Malaysia
228
A study on PDC drill bits quality
229
A study on pedestrian choice between stairway and escalator in the transfer station based on floor field cellular automata
230
A Study on Peel Volatile Constituents and Juice Quality Parameters of Four Tangerine (Citrus reticulata) Cultivars from Ramsar, Iran
231
A Study on Performance and Safety Tests of Defibrillator Equipment
232
A Study on Performance and Safety Tests of Electrosurgical Equipment
233
A study on performance improvements of HTS coil
234
A Study on Performance of Fuzzy Logic Type 2 PSS and Fuzzy type 2 Model Reference Learning PSS
235
A study on performance of Iranian supreme audit court
236
A Study on Performance of Simplified Vehicle Models inOptimization of Hydraulic Engine Mounts in Comparisonwith FullVehicle
237
A Study on Performance of Solid Oxide Fuel Cell-Stirling Engine Cycle Combined System - Part I: SOFC Simulation by Programming in Matlab and Modeling in Hysys
238
A study on performance stability of the passive direct borohydride fuel cell
239
A study on performance tracing of the e-MP policy
240
A study on persistent organochlorine pesticide residues in fish tissues and water from an agricultural fish pond
241
A study on pesticide runoff from paddy fields to a river in rural region—1: field survey of pesticide runoff in the Kozakura River, Japan
242
A study on pesticide runoff from paddy fields to a river in rural region—2: development and application of a mathematical model
243
A study on phase morphology and surface properties of polyurethane/organoclay nanocomposite
244
A study on phase stability observed in as sprayed Alumina-13 wt.% Titania coatings grown by detonation gun and plasma spraying on low alloy steel substrates
245
A study on photo-generated charges property in highly ordered TiO2 nanotube arrays
246
A study on photophysical properties of some Vitamin K3 derivatives
247
A study on photoreflectance characteristics of interface effect in Si delta-doped Al0.24Ga0.76As/In0.2Ga0.8As/GaAs pseudomorphic high electron mobility transistor structures
248
A Study on Physical and Hydraulic Properties in a Silt Loam Soil Influenced by Salinity and Turbidity of Irrigation Water
249
A study on pilot-scale degassing by polypropylene (PP) hollow fiber membrane contactors Original Research Article
250
A study on pitting corrosion of aluminum alloy 2024-T3 by scanning microreference electrode technique
251
A study on pitting corrosion of aluminum alloy 2024-T3 by scanning microreference electrode technique
252
A study on pitting corrosion of aluminum alloy 2024-T3 by scanning microreference electrode technique
253
A STUDY ON PLANT POLYMER: PECTIN PRODUCTION AND MODIFICATION
254
A study on plasticity and compression strength in wet iron ore green pellets related to real process variations in raw material fineness
255
A Study on Plowshares Wearing Behavior under Conditions of Sandy Loam Soil
256
A study on polarization hysteresis in PEM fuel cells by galvanostatic step sweep
257
A study on polymer blend electrolyte based on PVC/PMMA with lithium salt
258
A Study on Polymorphisms in Five Markers MR1-MR5 of Pit-1 Gene and Their Effects on Growth Rate and Carcass Traits in Egyptian Domestic Chickens
259
A study on polypyrrole-coated polystyrene sulfonic acid microspheres – a proton electrolyte
260
A study on port plug distortion caused by narrow gap combined GTAW & SMAW and Electron Beam Welding
261
A study on Portuguese manuscript illumination: The Charter of Vila Flor (Flower town), 1512
262
A study on possible risk factors for progressive supranuclear palsy in southern part of India
263
A study on possible solar and geomagnetic effects on the precipitation over northwestern Argentina Original Research Article
264
A study on powder mixing for high fracture toughness and wear resistance of WC–Co–Cr coatings sprayed by HVOF
265
A study on power-law distribution of hostnames in the URL references
266
A study on precision cold forging process improvements for the steering yoke of automobiles by the rigid–plastic finite-element method
267
A study on precision forging of spur gear forms and spline by the upper bound method
268
A study on precision forging of spur gear forms and spline by the upper bound method
269
A study on precision forging of spur gear forms and spline by the upper bound method
270
A study on prediction of bead height in robotic arc welding using a neural network
271
A study on preference and practices of women regarding place of delivery
272
A Study on Preference and Usage of Educational Related Websites by Higher Secondary School Teachers
273
A study on preparation and photocatalytic characterization of conjugated polymer/ZnS complex
274
A study on preparation of Mo–0.6Ti–0.2Zr–0.02C alloy by mechanical alloying and hot isostatic pressing, and its characterization
275
A study on press forming of automotive sub-frame parts using extruded aluminum profile
276
A study on pressure drop and heat transfer in open cell metal foams for jet engine applications
277
A study on prevalence of Eimeria spp. infection in camels of Tabriz region
278
A study on prevalence of Eimeria spp. infection in camels of Tabriz region
279
A study on Prevalence of Gastrointestinal Parasitic Infections in HIV (+) Patients Referred to Ahvaz Razi Hospital in 2008-2009
280
A study on Prevalence of Gastrointestinal Parasitic Infections in HIV (+) Patients Referred to Ahvaz Razi Hospital in 2008-2009
281
A study on prevalence of some helminthic infections of the liver and lungs among ruminants in abattoir of Fars province, Iran
282
A study on principal strain direction measurement in the uniaxial tensile test of composite
283
A Study on Printed Multiple Solid Line by Combining Microcontact and Flexographic Printing Process for Microelectronic and Biomedical Applications
284
A study on prioritizing typical women’s entrepreneur characteristics
285
A study on problems in diagnosis and treatment of hypertension in rural areas of Iran
286
A study on process evaluation and selection model for business process management
287
A study on processing of a composite metal foam via casting
288
A study on processing, characterization and erosion behavior of fish (Labeo-rohita) scale filled epoxy matrix composites
289
A study on processing, characterization and erosion wear behavior of silicon carbide particle filled ZA-27 metal matrix composites
290
A study on producing composite nanofiltration membranes with optimized properties Original Research Article
291
A Study on Productivity Model of Supply Chain in Industrial Units by System Dynamic Approach
292
A Study on Properties of Dempster-Shafer Theory to Probability Theory Transformations
293
A study on properties of epoxy resin toughened by functionalized polymer containing rigid, rod-like moiety
294
A Study on Protein Expression in Cervical Cancer by Using Proteomic Analyzers
295
A study on prothrombogenic and antithrombogenic biomarkers in deep vein thrombosis following meta-epiphyseal cancellous bone traumatization in major orthopedic surgeries
296
A Study on Psychological Health of First Year University Students in Iran
297
A study on pulse control for small-hole electrical discharge machining
298
A study on pulse plating amorphous Ni–Mo alloy coating used as HER cathode in alkaline medium
299
A study on pyrolysis and cross-link formation of poly(p-phenylene butadiyne) by thermoanalysis and spectroscopy
300
A study on pyrolytic gasification of coffee grounds and implications to allothermal gasification
301
a study on quality assessment of the translation of an abstract text english idioms errors made by jordanian efl undergraduate students by google translate
302
A study on quality monitoring of injection-molded parts
303
A STUDY ON QUALITY OF WORK LIFE (QWL) IN PSPCL
304
A STUDY ON QUALITY TRAITS OF CHICKEN EGGS COLLECTED FROM DIFFERENT AREAS OF KARACHI
305
A study on quantitative classification of binary gas mixture using neural networks and adaptive neuro-fuzzy inference systems
306
A study on quantitative formability assessment of rheological materials based on the microstructural characterization with a moderate control of the process
307
A study on quantitative structure–activity relationship and molecular docking of metalloproteinase inhibitors based on L-tyrosine scaffold
308
A study on quantitative structure–activity relationship and molecular docking of metalloproteinase inhibitors based on L-tyrosine scaffold
309
A study on quantum mechanical approach for C60 diffraction analysis
310
A study on quaternion blockquasi-tridiagonal systems
311
A Study on Query Optimization for Federated Database Systems
312
A study on quick charging method for small VRLA batteries
313
A study on radial basis function neural network size reduction for quantitative identification of individual gas concentrations in their gas mixtures
314
A study on radial directional natural frequency and damping ratio in a vehicle tire
315
A Study on Radiation Dose Received by Patients during Extracorporeal Shock Wave Lithotripsy
316
A STUDY ON RADIO FREQUENCY RADIATION DUE TO ACCESS POINTS AT RESIDENCES OF KUWAIT
317
A study on radon and thoron progeny levels in dwellings in South India
318
A study on ranking ethical factors influencing customer loyalty
319
A study on ranking the effects of transformational leadership style on organizational agility and mediating role of organizational creativity
320
A study on rapid growth and piezoelectric effect of ZnO nanowires array
321
A STUDY ON RARE mX SETS AND RARELY mX CONTINUOUS FUNCTIONS
322
A Study on Ratio of Loss to Storage Modulus for the Blood Clot
323
A study on realization of high performance without backfire in a hydrogen-fueled engine with external mixture
324
A study on recovery of oil from sludge containing oil using froth flotation
325
A study on recycling of abrasives in abrasive water jet machining
326
A STUDY ON RECYCLING THE FABRIC SCRAPS IN APPAREL MANUFACTURING INDUSTRY
327
A study on red tide risk and basic understanding of fishermen and residents in Bandar Abbas, Hormozgan Province, Iran (Persian Gulf)
328
A study on reduced support vector machines
329
A study on reducing the absorption of lidocaine from the airway in cats
330
A Study on Reducing the Power Consumption of Wireless Sensor Networks
331
A study on reflectivity limit of neutron supermirror
332
A study on reflectivity limit of neutron supermirror
333
A Study On Regarding The Use of The 3P Method and The Cloze Technique In Order To Correct The Reading Difficulty
334
A study on regeneration of Mn–Fe–Zn–O supported upon γ-Al2O3 sorbents for hot gas desulfurization
335
A STUDY ON REGIONAL STABILITY ANALYSIS METHODOLOGY WITH A ONE-POINT NEUTRON KINETICS MODEL
336
A study on reinforcement corrosion and related properties of plain and blended cement concretes under different curing conditions
337
A study on relationship among free cash flow, firm value and investors’ cautiousness: Evidence from Tehran Stock Exchange
338
A study on relationship between abnormal accruals and future profitability: Evidence from Tehran Stock Exchange
339
A Study on Relationship Between Anthracosis and Pulmonary Tuberculosis
340
A study on relationship between assets’ objectivity, ROA, ROE and ownership ratio with liquidity cycle
341
A study on relationship between asymmetric information on dividend polices of companies listed in Tehran Stock Exchange
342
A study on relationship between attracting deposits and granting facilities on growth of banks’ deposits
343
A study on relationship between audit quality and earnings management in Iranian banking industry
344
A study on relationship between CAMELS Indexʹʹs and Risk taking: A case study of Iranian banking industry
345
A study on relationship between capital employed efficiency and operating cash flow: Evidence from Tehran Stock Exchange
346
A study on relationship between cash opportunity cost and financial flexibility
347
A study on relationship between communication models and crisis management in Tehran’s firefighting department
348
A study on relationship between computer games usage and educational progress
349
A study on relationship between conflict management styles and organizational agility: A case study of Ilam state University, Iran
350
A study on relationship between creativity and idealistic realistic attitude: A case study of high school teachers
351
A study on relationship between cultural intelligence and cross-cultural adjustment in tour management
352
A study on relationship between cultural values and earnings quality: A case study on Iranian banking indus
353
A study on relationship between dividend changes with future profitability
354
A study on relationship between earning conservatism with investment elasticity on Iranian firms
355
A study on relationship between earnings before tax, interest and operational cash flows with stockholders’ equity ,
356
A study on relationship between earnings management and operating cash flows management: Evidence from Tehran Stock Exchange
357
A study on relationship between earnings response coefficient and earnings management: Evidence from Tehran Stock Exchange
358
A study on relationship between electronic banking and liquidity management on Iranian banks
359
A study on relationship between emotional intelligence and entrepreneurship of trainees in vocational and technical organization
360
A study on relationship between emotional intelligence and organizational indifference through the organizational commitment: A case study of an Iranian firm
361
A study on relationship between emotional intelligence components of sales managers from Goleman’s viewpoint and sales promotion activities in Iranian business enterprises
362
A study on relationship between emotional maturity and marital satisfaction
363
A study on relationship between employees’ psychological empowerment and organizational commitment
364
A study on relationship between empowering employees and social capital depreciation: A case study of treasury department
365
A study on relationship between English proficiency and information literacy
366
A study on relationship between ethical leadership and organizational trust between teachers and principals: A case study of high school employees in Shahre-Kord, Iran
367
A study on relationship between ethical leadership style and organizational learning based on Northouse model: A case study of governmental organizations in province of Charmahal-Bakhtiari in Iran
368
A study on relationship between female employees’ organizational citizenship behavior and job satisfaction within organization
369
A study on relationship between firmʹʹs financial performance and immediate and long-term stock return
370
A study on relationship between income, health and family relationship and happiness
371
A study on relationship between inflation rate and changes in profitability ratios in Tehran Stock Exchange
372
A study on relationship between information technology facilities and performance of banking industry
373
A study on relationship between institutional investors and earnings management: Evidence from the Tehran Stock Exchange
374
A Study on Relationship between Intellectual Capital and Refined EVA in Insurance Companies as Member of Tehran Stock Exchange
375
A study on relationship between internal auditing and quality of financial statement
376
A study on relationship between investment opportunities and earnings: A corporate life cycle investigation
377
A study on relationship between knowledge management and organizational change in learning organizations: A case study of cable industry
378
A study on relationship between knowledge management and organizational culture based on Denison model: A case study of PVC industry
379
A study on relationship between lower of cost or market and tax
380
A study on relationship between market orientation`s culture and exporting performance: A case study of manufacturing corporations listed on Tehran Stock Exchange
381
A study on relationship between market share and cash flow policy
382
A study on relationship between no-interest based activities on performance of Iranian banks
383
A study on relationship between operating cash flows and performance evaluation criteria based on the theory of constraints (TOC) versus traditional method
384
A study on relationship between organizational climate and creativity
385
A study on relationship between organizational culture and communication apprehension
386
A study on relationship between organizational culture and information technology on knowledge sharing
387
A study on relationship between organizational culture and organizational commitment
388
A study on relationship between organizational culture and productivity
389
A study on relationship between organizational structure and learning characteristics: A case study of revenue agency
390
A study on relationship between process variables and bead penetration for robotic CO2 arc welding
391
A Study on Relationship between Project Management Function,Technology Utilization and Project Performance
392
A study on relationship between quality of life and employee performance
393
A study on relationship between quality of work life and job satisfaction
394
A study on relationship between rewarding board of directors and share liquidity
395
A study on relationship between service quality and customer satisfaction: An empirical evidence from Pakistan telecommunication industry
396
A study on relationship between social capital and sustainable development
397
A study on relationship between social entrepreneurship and organizational commitment
398
A study on relationship between tail risk on earning management in Iranian banking industry
399
A study on relationship between the information of cash value added and return of stocks: An empirical investigation on accounting profit, free cash flow and Tobin’s Q
400
A study on relationship between the return of value/growth portfolio and market return: Evidence from Tehran Stock Exchange
401
A study on relationship between workforce agility and knowledge sharing
402
A study on relationship between working capital and profitability
403
A study on relationship of brand characteristics and customer satisfaction with brand loyalty
404
A study on relationship of job burnout and emotional intelligence with organizational commitment
405
A study on relationships among chemical, physical, and qualitative assessment in traditional balsamic vinegar
406
A study on relationships between critical success factors of knowledge management and competitive advantage
407
A study on relativistic lagrangian field theories with non-topological soliton solutions Original Research Article
408
A study on reliability-based design systems of very large floating structures under extreme wave loads
409
A study on religious values
410
A study on remaining oil distribution in a carbonate oil reservoir based on reservoir flow units
411
A study on remanufacturing of deactivated commercial DPF using diesel engine dynamo system in ND-13 mode
412
A Study on removal of chromium from tannery effluent treatment of chrome tanning waste water using tannery solid waste
413
A study on removal of fluorides from drinking water by adsorption onto low-cost materials
414
A study on required volume of superconducting element for flux flow resistance type fault current limiter
415
A study on residential heating energy requirement and optimum insulation thickness
416
A study on resistance of PECVD silicon nitride thin film to thermal stress-induced cracking
417
A study on resistance welding in steel sheets for tailor welded blank: Evaluation of flash weldability and formability (2nd Report)
418
A study on resistance welding in steel sheets using a tailor-welded blank (1st report): Evaluation of upset weldability and formability
419
A study on resonance frequency of cantilevered triple-walled carbon nanotube with short middle- and outer-walls
420
A study on retention “projection” as a supplementary means for compound identification by liquid chromatography–mass spectrometry capable of predicting retention with different gradients, flow rates, and instruments
421
A Study on Retention of a Series of Aromatic Compounds in Mixed Micellar Liquid Chromatography Using Linear Solvation Energy Relationship (LSER)
422
A study on rf plasma nitriding at a constant power in different H2–N2 mixtures at different temperatures
423
A study on rheological behavior of MWCNTs/epoxy composites
424
A Study on Right Side Vehicle Paint Thickness Using SPC Method in an Automotive Company
425
A study on ring tensile specimens
426
A Study on Risk Assessment of Benzene as one of the VOCs Air Pollution
427
A STUDY ON RISK, RETURN IN PORTFOLIO SELECTION AND INVESTMENT DECISION
428
A study on river discharge and salinity variability in the Middle Atlantic Bight and Long Island Sound
429
A study on robust adaptive modulation controller for TCSC based on COI signal in interconnected power systems
430
A study on robust indentation techniques to evaluate elastic–plastic properties of metals
431
A study on robust optimization of layered plates bonding process based on inverse analysis
432
A Study on Robustness of Various Deformable Image Registration Algorithms on Image Reconstruction Using 4DCT Thoracic Images
433
A STUDY ON RODENT ECTOPARASITES IN BANDAR ABBAS: THE MAIN ECONOMIC SOUTHERN SEAPORT OF IRAN
434
A Study on Rodent Ectoparasites in the North district of Tehran, Iran During 2007-2009
435
A Study on Role of Adarsh Rythu in Disseminating Technical Content on Farming Methods in Krishna District
436
A study on roughness of the micro-end-milled surface produced by a miniatured machine tool
437
A STUDY ON RURAL MARKETING WITH SPECIAL REFERENCE TO ICICI BANK
438
A Study on Safety of Reconstructed Regions after 1990 Rudbar-Manjil Earthquake in Iran
439
A study on Sb doping in lead tungstate crystals
440
A study on Sb doping in lead tungstate crystals
441
A study on SB doping in lead tungstate crystals
442
A study on SB doping in lead tungstate crystals
443
A Study on Scalable Video Coding for AMC with Mobile Media-Based Multicast over WiMAX 802.16e
444
A study on scale factor in distributed differential evolution
445
A Study on Schools of Geography throughout the History of Islamic Civilization
446
A study on scuffing and transition of friction and wear of TiN films using ultrasonic backward radiation
447
A study on seamless tube in the planetary rolling process
448
A STUDY ON SEARCH ENGINE MARKETING
449
A study on searching for similar documents based on multiple concepts and distribution of concepts
450
A Study on Seasonal Variations in Water Quality Parameters of Dhaka Rivers
451
A STUDY ON SECONDARY SCHOOL STUDENTS’ MATHEMATICS ANXIETY IN TERMS OF GENDER FACTOR
452
A study on secure wireless networks consisting of home appliances
453
A study on seed characteristics and seed bank of Spartina alterniflora at saltmarshes in the Yangtze Estuary, China
454
A study on seepage data utilized in the safety assessment of Haditha Dam: A simulation by SEEP/W model
455
A Study on Seismic Analysis of Underground Tunnels for Delhi Metro
456
A study on selected anthelmintics on strongylosis along with haematology in horses in Quetta region
457
A Study on Selected Water Quality Parameters along the River Buriganga, Bangladesh
458
A study on self-reconfiguration of a knowledgeable manufacturing system
459
A study on sensitivity of spatial sampling designs to a priori discretization schemes
460
A STUDY ON SEPARATION AND CLEANING OF PEANUT SEEDS
461
A Study on Series Solutions of Two Species Lotka Volterra Equations by Adomian Decomposition and Homotopy Perturbation Methods
462
A Study on Series Solutions of Two Species Lotka Volterra Equations by Adomian Decomposition and Homotopy Perturbation Methods
463
A study on seroprevalence and coproantigen detection of Toxoplasma gondii in companion cats in Ahvaz area, southwestern Iran
464
A study on shear behavior of reinforced concrete beams subjected to long-term heating Original Research Article
465
A study on shielding gas contamination in laser welding of non-ferrous alloys
466
A study on Si and P doped h-BN sheets: DFT calculations
467
A study on simulation method of starlight transmission in hypersonic conditions
468
A study on sintering aids for Sm0.2Ce0.8O1.9 electrolyte
469
A STUDY ON SINTERING BEHAVIORS OF COPPER COATED SIC COMPOSITE POWDERS FABRICATED BY ELECTROLESS PLATING AND MECHANICAL PROPERTIES OF THE CONSOLIDATED COMPOSITES
470
A study on SiO2 particle erosion of flake graphite and spheroidal graphite cast irons
471
A Study on Six Rose Cultivars in Terms of Minerals, Vitamins, and Antioxidant Compounds
472
A study on slab‐wooden dust‐slab phantom for the development of thorax phantom
473
A study on sliding and erosive wear behaviour of atmospheric plasma sprayed conventional and nanostructured alumina coatings
474
A Study on Sliding Mode State Estimation
475
A Study on Sliding Mode State Estimation
476
A study on sliding wear mechanism of ultrahigh molecular weight polyethylene/polypropylene blends
477
A study on sliding wear of a 7075 aluminum alloy
478
A study on slow evaporation of liquids in a dual-porosity porous medium using square network model
479
A study on small investorsʹ behavior in choosing stock case study: Kuala-Lumpur stock market
480
A study on small-world brain functional networks altered by postherpetic neuralgia
481
A study on Sn ion implantation into lead telluride thermoelectric material
482
A study on social capital in banking industry: A case study of Ghavamin bank
483
A Study on Social Factors Fffecting Type 2 Diabetes Self-management, a Narrative Review
484
A Study on Social Mobility in Post-Revolutionary Rural Iran
485
A Study on Socio-economic status Effects on Private Universities Architecture Students’ Educational Motivation
486
A STUDY ON SOFT SKILL DEVELOPMENT AMONG FINAL YEAR DIPLOMA IN BUSINESS STUDIES STUDENTS
487
A STUDY ON SOFTWARE PROJECT TRACKING AND OVERSIGHT PRACTICES AMONG SOFTWARE COMPANIES IN MALAYSIA
488
A study on solid-state drawn fibers of polyethylene by confocal Raman microspectrometry: evaluation of the orientation profiles of amorphous and crystalline phases across the fiber section
489
A study on some chemical and physico-mechanic properties of three sweet cherry varieties (Prunus avium L.) in Turkey Original Research Article
490
A Study on Some Language Impairments in Patients with Lewy Body Spectrum Disorders
491
A Study on Some Non-genetic Factors and Their Impact on Milk Yield and Lactation Length of Sudanese Nubian Goats
492
A study on some physico-chemical properties of Turkey okra (Hibiscus esculenta L.) seeds Original Research Article
493
A study on some properties of leap graphs
494
A study on some urban bus transport networks
495
A study on sorption properties of Cd2+ on Ariake clay for evaluating its potential use as a landfill barrier material
496
A study on source-sink relationship, photosynthetic ratio of different organs on Yield and Yield Components in bread wheat (Triticum aestivum L.)
497
A Study on Space Masts Based on Octahedral Truss Family
498
A study on spatial coherence using quadratic radially distributed apertures (application to confocal imaging)
499
A study on spatial correlation of natural wind
500
A study on spatial resolution of pixelated CsI(Tl) scintillator
501
A study on spatial resolution of pixelated CsI(Tl) scintillator
502
A study on spatially extended phase objects using speckle photography
503
A study on spherical oil agglomeration of barite suspensions
504
A study on sport facilities and capabilities of Azerbaijan area in Iran; some sport management suggestions
505
A study on spot heating induced fatigue crack growth retardation
506
A study on springback of profile plane stretch–bending in the loading method of pretension and moment
507
A study on springback of profile plane stretch–bending in the loading method of pretension and moment
508
A study on stabilization of HHeF molecule upon complexation with Xe atoms
509
A study on stack configuration of continuous electrodeionization for removal of heavy metal ions from the primary coolant of a nuclear power plant
510
A study on stall-delay for horizontal axis wind turbine
511
A Study on State Dependent Accessible and Second Optional Service Queue with Impatient and Feedback Customers
512
A Study on Statistical Convergence of Triple Sequences in Intuitionistic Fuzzy Normed Space
513
A Study on status of Organizational Learning and targeted Organizational Forgetting from the Viewpoint of the Teachers
514
A Study on Steady Natural Convective Heat Transfer Inside A Square Cavity For Different Values of Rayleigh and Nusselt Numbers
515
A Study on Stiffness of a Defective Rippled Graphene Using Molecular Dynamics Simulation
516
A study on stimulated emission from erbium in silicon
517
A study on stochastic resonance of one-dimensional bistable system in the neighborhood of bifurcation point with the moment method
518
A Study on Store Image Attributes and Loyalty Behaviour
519
A study on stray capacitance modeling of inductors by using the finite element method
520
A study on strength and durability of self-compacting concretes made of recycled aggregates
521
A Study on Strength Characteristics of Phosphogypsum Concrete
522
A study on stress and vibration analysis of a steel and hybrid flexspline for harmonic drive
523
A study on stress and vibration analysis of a steel and hybrid flexspline for harmonic drive
524
A study on stress corrosion cracking and hydrogen embrittlement of AZ31 magnesium alloy
525
A study on stress corrosion cracking and hydrogen embrittlement of AZ31 magnesium alloy
526
A study on Stress, Depression and NK Cytotoxic Potential in Women with Recurrent Spontaneous Abortion
527
A study on structural and electrical properties of low dielectric constant SiOC(–H) thin films deposited via PECVD Original Research Article
528
A study on structural and optical properties of Mn- and Co-doped SnO2 nanocrystallites
529
A study on structural, optical and hydrophobic properties of oblique angle sputter deposited HfO2 films
530
A Study on Structural, Optical, and Magnetic Properties of ZnO/ZnFe2O4 Composite
531
A Study on Structure and Property of Special Sulfonated Petroleum as a Complicated Anionic Surfactant
532
A study on structure of codes over $\mathbb Z_4+u\mathbb Z_4+v\mathbb Z_4 $
533
A study on student perceptions of higher education classrooms: Impact of classroom attributes on student satisfaction and performance
534
A Study on Subfertile Women Suffering from Polycystic Ovarian Syndrome with Hyperprolactinaemia and Hypothyroidism as Associated Factors
535
A study on subjective preference to daylit residential indoor environment using conjoint analysis
536
A study on subsequent yield surface based on the distributed-element model
537
A study on sulfites for lithium-ion battery electrolytes
538
A study on sulfur reduction in FCC gasoline using Zn–Mg–Al spinels
539
A study on super-speed forming of metal sheet by laser shock waves
540
A Study on Supply Chain Risk Factors and Their Impact on Organizational Performance
541
A STUDY ON SURFACE CHARACTERIZATION OF ENZYME TREATED POLYETHYLENE TEREPHTHALATE FIBERS BY XPS AND AFM
542
A study on surface endothelialization of plasma coated intravascular stents
543
A Study on surface property of thick-film embedded resistor fabricated by laser micro-cladding and rapid prototype
544
A Study on Surface Roughness and Burr Formation of Al6061 with Different Spindle Speed and Federate for Small End Milling Cutter
545
A study on surface roughness in abrasive waterjet machining process using artificial neural networks and regression analysis method
546
A study on sustained release formulations for oral delivery of 5-fluorouracil based on alginate–chitosan/montmorillonite nanocomposite systems
547
A Study on Swelling and Complex Formation of Acrylic Acid and Methacrylic Acid Hydrogels with Polyethylene Glycol.
548
A Study on Switching Intervals in Classic DTC for Induction Motor
549
A study on switching voice traffic seamlessly between GSM and GPRS cellular networks
550
A study on symptom profiles of late-life depression: The influence of vascular, degenerative and inflammatory risk-indicators
551
A study on synergistic effect of photocatalytic ozonation for carbaryl degradation Original Research Article
552
A study on synthesis and characterization of the core–shell materials of Mn1−xZnxFe2O4–polyaniline
553
A study on synthesis and properties of Ag nanoparticles immobilized polyacrylamide hydrogel composites
554
A study on synthesis of starch ferulate and its biological properties
555
A study on temperature dependency and in situ observation of domain structure in Langmuir layers of stearic acid/γ-Fe2O3 nanoparticle complex at the air/water interface
556
A study on temperature distribution influenced by various land uses
557
A study on tensile properties of a novel fiber/metal laminates
558
A Study on Ternary Ti-rich TiNiZr Shape Memory Alloys
559
A study on testing techniques for concrete-like materials under compressive impact loading
560
A Study on th e Effects of IL·10 in Anti-Thy 1-Induced Glomerulonephritis in Rats
561
A study on the [18F]FDG production efficiency of the MINItrace™ cyclotron in Shin Kong Memorial Hospital
562
A study on the [18F]FDG production efficiency of the MINItrace™ cyclotron in Shin Kong Memorial Hospital
563
A study on the 0D phenomenological model for diesel engine simulation: Application to combustion of Neem methyl esther biodiesel
564
A study on the a-amylase fermentation performed by Bacillus amyloliquefaciens
565
A Study on the Abundance Distribution of Heavy Elements in Metal-poor Stars by the Parameterization Method
566
A study on the accuracy and precision of external mass transfer and diffusion coefficients jointly estimated from pseudo-experimental simulated data Original Research Article
567
A study on the accuracy of finite volume numerical models with non-rectangular mesh
568
A study on the acoustic boundary admittance. Determination, results and consequences
569
A STUDY ON THE ACOUSTICAL ABSORPTION BEHAVIOR OF COIR FIBER USING MIKI MODEL
570
A study on the action of non-Gaussian noise on a Brownian particle
571
A study on the activity and thermal stability of adenosine deaminase in the presence of spermine
572
A Study on the Activity Concentration of Po-210 in the Marine Environment of the Kapar Coastal area
573
A study on the activity of CaO-based sorbents for capturing CO2 in clean energy processes
574
A study on the actuator efficiency behavior of safety-related motor operated gate and globe valves Original Research Article
575
A study on the adhesion enhancement of polyetherimide to Si wafer using an Al-chelate treatment during multichip module fabrication
576
A Study on the Adsorption and Catalytic Oxidation of Asphaltene onto Nanoparticles
577
A Study on the Adsorption and Catalytic Oxidation of Asphaltene onto Nanoparticles
578
A study on the adsorption characteristics of an amphiphilic phenothiazine drug on activated charcoal in the presence of surfactants
579
A study on the adsorption of bovine serum albumin onto electrostatic microspheres: Role of surface groups
580
A Study on the Adsorption of Cadmium(II) from Aqueous Solution onto Activated Carbon Originated from Bombax ceiba Fruit Shell
581
A study on the adsorption structure of an adhesive monomer for precious metals by surface-enhanced Raman scattering spectroscopy
582
A study on the adsorptive catalytic voltammetry of titanium with salicylfluorone
583
A study on the advanced performance of an absorption heater/chiller with a solution preheater using waste gas
584
A study on the aero-elastic flutter of stiffened laminated composite panel in the supersonic flow
585
A Study on the Aggregation and Calf Thymus DNA Binding Characteristics of Anionic Cobalt(II) Tetrasulfonated Phthalocyanine
586
A study on the air permeability as affected by compression of three French soils
587
A Study On the Alienation Level Of Professional Accountants
588
A study on the aliphatic energetic plasticizers containing nitrate ester and nitramine
589
A study on the alkali-aggregate reaction in high-strength concrete with particular respect to the ground granulated blast-furnace slag effect
590
A study on the alkaline hydrolysis of isatin-β-thiosemicarbazone by capillary electrophoresis with enhanced sample loadability
591
A Study on the Alteration of Endoplasmic Reticulum Stress-related Proteins in Cyclophosphamide-induced Damage to Urothelium
592
A Study on the Aluminizing of Electrodeposited Nickel at 500 °c
593
A study on the aluminum fire-through to a-SiNx:H thin film for crystalline solar cells
594
A study on the analgesic effects of four new derivatives of 3-hydroxy pyridine-4-one
595
A study on the Anatomical Variations in the Formation of Renal Pelvi-calyceal System in Population of Northeast India
596
A study on the annual runoff change and its relationship with water and soil conservation practices and climate change in the middle Yellow River basin
597
A Study on the Antibacterial Activity of Lactic Acid Bacteria Isolated from Traditional Iranian Milk Sample
598
A Study on the Antimicrobial Activities of Chitin and Chitosan Extracted from Freshwater Prawn Shells (Macrobrachium Nipponense)
599
A Study on the Antimicrobial Effect of Zinc Oxide Nanoparticles on Clinical Strains of Staphylococcus aureus Resistant to Vancomycin
600
A study on the antimicrobial efficacy of RF oxygen plasma and neem extract treated cotton fabrics
601
A Study on the Antioxidant and Antimicrobial Properties of the Aerial Parts Extract of Lagerstroemia indica L.
602
A Study on the applicability of implantable microchip transponders for body temperature measurements in pigs
603
A study on the applicability of solid state, real-time dosimeters to the CMS experiment at the large hadron collider
604
A study on the applicability of solid state, real-time dosimeters to the CMS experiment at the large hadron collider
605
A study on the applicability of vibration in fresh high fluidity concrete
606
A study on the applicability of zinc acetate impregnated silica substrate in the collection of hydrogen sulfide by active sampling
607
A study on the applicability on multicomponent calibration methods in chemometrics
608
A Study on the Application and Residues of Plant Growth Regulators in the Fruit Sugarcane Grown in the Sub-Suitable Region
609
A study on the application method of the Functional Requirements for Bibliographic Records (FRBR) to the Online Public Access Catalog (OPAC) in Korean libraries
610
A study on the application of data mining to disadvantaged social classes in Taiwan’s population census
611
A study on the application of fuzzy theory to structural active control Original Research Article
612
A study on the application of material selection optimization approach for structural-acoustic optimization
613
A study on the application of scaling equation for asphaltene precipitation
614
A Study on the Application of Task-based Language Teaching Method in a Comprehensive English Class in China
615
A study on the application rate of CSF test (cerebro spinal fluid) in diagnosing accute bacterial meningitis in infants and children under 5 years old in Tajrish shohada and Tehran mofid hospitals dur
616
A study on the applications of the acoustic design sensitivity analysis of vibrating bodies
617
A study on the aromaticity and magnetotropicity of 10π-electron azapentalene derivatives
618
A study on the aromaticity of [n]phenacenes and [n]helicenes (n = 3–9)
619
A study on the artificial insemination interview experience of nursing students in the COVID-19 situation
620
A study on the assessment of DNA strand-breaking activity by silver and silica nanoparticles
621
A STUDY ON THE ASSIGNMENT PROCEDURES AND PRINCIPLES OF HIGH-STAGE PUBLIC ADMINISTRATORS
622
A study on the association between Angiotensin-I converting enzyme I/D dimorphism and type-2 diabetes mellitus
623
A Study on the Association between CCRΔ32 Mutation and HCV Infection in Iranian Patients
624
A Study on the Association of Days Open with the Genetic Ranking of Iranian Holstein Bulls for the Trait of Milk Yield
625
A Study on the Association of Interleukin-1 Cluster with Genetic Risk in Bipolar I Disorder in Iranian Patients: A Case-control Study
626
A study on the association of serum fibroblast growth factor-23 with various indices of chronic kidney disease patients not yet on dialysis
627
A study on the asymmetric effects of oil and non-oil revenues on the financial development index in Iran
628
A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys
629
A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys
630
A study on the automated process planning system for cold forging of non-axisymmetric parts using FVM simulation
631
A Study on the Autonomous Learning Validity of Chinese EFL Students
632
A Study on the Availability and Utilisation of Microcredit in the Traditional Fisheries Sector of Kerala, India
633
A STUDY ON THE AWARENESS OF CONSUMER PROTECTION ACT AND THE PERFORMANCE OF THE TIRUNELVELI DISTRICT CONSUMER DISPUTES REDRESSAL FORUM
634
A study on the awareness, attitudes and performance of teachers towards the organ donation during 2016-2017
635
A study on the barrelling of sintered iron preforms during hot upset forging
636
A study on the bearing contact of roller gear cams Original Research Article
637
A study on the behavior of bubbles and solids in bubbling fluidized beds
638
A study on the behaviour of bubbles of a 2D gas–solid fluidized bed using digital image analysis
639
A study on the bending stiffness of single-walled carbon nanotubes and related issues
640
A Study on the Benefit of Integrating Technology with Management: Does it Essentially Nurture Holistic Development?
641
A study on the benefits of augmented reality in retaining working memory in assembly tasks: A focus on differences in gender
642
A study on the BF3 directed lithiation of 3-chloro- and 3-bromopyridine
643
A study on the BF3-directed lithiation of 2-picoline and 2,3-lutidine
644
A study on the bi-directional springback of sheet metal stamping
645
A study on the bilinear Caudrey–Dodd–Gibbon equation Original Research Article
646
A study on the binding interaction between the imidazole derivative and bovine serum albumin by fluorescence spectroscopy
647
A study on the binding of two water-soluble tetrapyridinoporphyrazinato copper(II) complexes to DNA
648
A study on the bioactivity of chitosan/nano-hydroxyapatite composite scaffolds for bone tissue engineering
649
A study on the bio-hydro mechanical effects of the tree roots on the Agaclı coal reclaimed – forested land
650
A study on the buckling behaviour of a bellows-type vacuum vessel with torus shape in a reversed field pinch device
651
A study on the calcination and sulphation behaviour of limestone during oxy-fuel combustion
652
A study on the calculation of stopping power and CSDA Range for incident positrons
653
A study on the Cap model for metal and ceramic powder under cold compaction
654
A study on the carbon dioxide recovery from 2 ton-CO2/day pilot plant at LNG based power plant
655
A study on the carbonization of grapeseed and chestnut shell
656
A study on the catalytic activity of a new acidic ordered mesoporous silica (SBA-15)
657
A study on the catalytic synergy effect between noble metals and cobalt phases in Ce-Al-O supported catalysts Original Research Article
658
A study on the cavitation resistance of ion-nitrided steel
659
A Study on the CdZnTe Array Detector
660
A study on the cementlike properties of municipal waste incineration ashes
661
A Study on the Challenges Faced By Health Systems in Establishing Risk Management in Selected Hospitals of Tehran University of Medical Sciences
662
A study on the change of enantiomeric purity of catechins in green tea infusion
663
A STUDY ON THE CHANGE OF FATIGUE FRACTURE MODE IN TWO TITANIUM ALLOYS
664
A study on the char burnout characteristics of coal and biomass blends
665
A study on the characteristic behavior of mass inclusions added to a poro-elastic layer
666
A study on the characteristics in a symmetry Boltzmann machine composed of two Boltzmann machines
667
A study on the characteristics of (Ti1−xAlx)N coatings deposited by plasma-enhanced chemical vapor deposition after heat treatment
668
A study on the characteristics of a rubber blend of fluorocarbon rubber and hydrogenated nitrile rubber
669
A study on the characteristics of carbon nanofluids at the room temperature (25 °C)
670
A study on the characteristics of electrical discharge textured skin pass mill work roll
671
A study on the characteristics of nighttime bedroom cooling load in tropics and subtropics
672
A study on the characteristics of OLEDs using Ir complex for blue phosphorescence
673
A study on the characteristics of OLEDs using Ir complex for blue phosphorescence
674
A Study on the Characteristics of Palm-Based Polyurethane as a Lightweight Aggregate in Concrete Mix
675
A study on the characteristics of spray angle formation in a 2 inch hydrocyclone using water only
676
A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC
677
A study on the characteristics of the SO2 reduction using coal gas over SnO2-ZrO2 catalysts
678
A Study on the Characteristics of the Structure of Vegaʹs Debris Disk
679
A study on the characteristics of upward air–water two-phase flow in a large diameter pipe
680
A study on the characteristics, predictions and policies of China’s eight main power grids
681
A study on the characterization and pathogenicity of bacteria from Lymantria dispar L. (Lepidoptera: Lymantriidae)
682
A study on the characterization of high nickel alloy micro-holes using micro-EDM and their applications
683
A study on the characterization of the incipient failure behavior of insulators in power distribution line
684
A study on the chelation control in the regioselective opening of 2,3-bifunctionalized epoxides
685
A study on the Chemical Composition and Antifungal Activity of Essential Oil from Thymus caramanicus, Thymus daenensis and Ziziphora clinopodiaides
686
A study on the chemical mechanical micro-machining (C3M) process and its application
687
A study on the chemical stability of the Versatic 10–Acorga CLX50 synergistic system
688
A Study on the Class of Chain Ratio–type Estimators
689
A study on the clinico-epidemiological profile of vitiligo patients and its association with endocrine, audiological and ocular abnormalities
690
A Study on the CO Isotopic Lines of the Star Forming Region AFGL 5157
691
A study on the coagulation of polycyclic aromatic hydrocarbon clusters to determine their collision efficiency
692
A Study on the Colored Glazed Tiles of Soltaniyeh Dome: an Analytical Approach
693
A study on the combined effect of forging and aging in Mg–Y–RE alloy
694
A study on the combined interplay between stochastic fluctuations and the number of flagella in bacterial chemotaxis
695
A Study On The Communication And Emphatic Skills Of The Students Having Education On Tourism Sector
696
A Study on the Communicative Functions Used in Various Contexts by a Child with Hearing Loss
697
A study on the comparison between thermodynamics and kinetics of reaction of the ozone and mercury, silver and gold
698
A study on the comparison between thermodynamics and kinetics of reaction of the ozone and mercury, silver and gold
699
A Study on the Complexes between Human Erythrocyte Enzymes Participating in the Conversions of 1,3-Diphosphoglycerate
700
A study on the composition and antimicrobial activities of stored and freshly extracted leaf essential oils of Ocimum gratissimum L.
701
A study on the composition of distillates obtained from smoked marc Original Research Article
702
A study on the composition of size-fractionated suspended particulate matter in shallow coastal waters of Chabahar Bay
703
A study on the composition optimization and mechanical properties of Al–Mg–Si cast alloys
704
A study on the compressive strength of thick carbon fibre–epoxy laminates
705
A study on the computation of the redundant deformation factor in wire drawing of austenitic 304 stainless steel
706
A study on the computer-aided measuring integration system for the sheet metal stamping die
707
A Study on the Concept of Mental Health and its Implication for Social Work Education in the Context of Chinese Communities
708
A study on the connection effects of subsurface slabs to exterior walls in the KNGR seismic analysis
709
A study on the connection effects of subsurface slabs to exterior walls in the KNGR seismic analysis Original Research Article
710
A study on the consecutive preparation of d-xylose and pure superfine silica from rice husk
711
A study on the consecutive preparation of silica powders and active carbon from rice husk ash
712
A Study on the Contact Ellipse and the Contact Pressure During the Wheel Wear through Passing the Tracks including Several Sharp Curves
713
A Study on the Contributing Factors of Major Landslides in Malaysia
714
A Study on the Contribution of Foreign Direct Investment to Economic Growth in Afghanistan
715
A study on the convergence of genetic algorithms
716
A study on the convergence of least-squares meshfree method under inaccurate integration
717
A study on the convergence of observer-based kinetics estimators in stirred tank bioreactors
718
A study on the convergence of variational iteration method
719
A study on the convergent and discriminant validity of the Dental Anxiety Inventory
720
A study on the conversion of indanones into carbostyrils Original Research Article
721
A study on the conversion of trona to sodium bicarbonate
722
A study on the cooling effects of greening in a high-density city: An experience from Hong Kong
723
A Study on the Correlation between Customers’ Attitude toward New Services by the Banking System and Customers’ loyalty: A Case of Private Banks in Iran
724
A study on the correlation between electronic structures of RENi5 and their hydrides and hydrogen absorption properties Original Research Article
725
A Study on the Correlation between Reading Comprehension and Translation Skills of ELT Students
726
A study on the correlation between the thermal contact conductance and effective factors in fin–tube heat exchangers with 9.52 mm tube
727
A study on the corrosion behavior of aluminum alloys in seawater
728
A study on the cost effectiveness of sestamibi scintimammography for screening women with dense breasts for breast cancer
729
A study on the cost effectiveness of sestamibi scintimammography for screening women with dense breasts for breast cancer
730
A study on the counter-intuitive behaviors of pin-ended beams under projectile impact
731
A study on the Co–W activated Ni electrodes for the hydrogen production from alkaline water electrolysis – Energy saving
732
A study on the Cr(VI) removal from aqueous solutions by steel wool Original
733
A study on the crack control of a high-speed steel roll fabricated by a centrifugal casting technique
734
A study on the crack initiation and growth from δ-ferrite/γ phase interface under continuous fatigue and creep-fatigue conditions in type 304L stainless steels
735
A study on the critical factors of human error in civil aviation: An early warning management perspective in Bangladesh
736
A study on the critical success factors for corporations embarking on knowledge community-based e-learning
737
A study on the criticality search of transuranium recycling BWR core by adjusting supplied fuel composition in equilibrium state
738
A study on the cross-sectional profile of flat rolled wire
739
A study on the crystallization behavior of poly(β-hydroxybutyrate) thin films on Si wafers
740
A STUDY ON THE CUSTOMER’S ACCEPTANCE TOWARDS ISLAMIC BANKING PRODUCTS AMONG NON-MUSLIM IN DUAL BANKING SYSTEM
741
A study on the customer-based brand equity of Taiwanese and Indonesian teenagers for a global brand
742
A STUDY ON THE CUSTOMERS’ PERCEPTION OF DIFFERENT CHILDREN’S HEALTH DRINKS
743
A study on the cycling oxidation behavior of mullite-coated silicon carbide
744
A study on the damping characteristics of laminated composites with integral viscoelastic layers
745
A study on the d-dimensional Schrödinger equation with a power-law nonlinearity
746
A STUDY ON THE DECISION MAKING PROCESS IN NEWSROOMS AND GOVERNMENT POLICIES UNDER DATO’ SRI MOHD NAJIB’S ADMINISTRATION: A COMPARISON BETWEEN RTM AND ASTROAWANI
747
A study on the decomposition of N2O over YBa2Cu3O7
748
A study on the defects structure of colloidal ZnS using Ag surface plasmons
749
A study on the deflection of shape memory alloy (SMA) reinforced thermo-viscoelastic beam
750
A study on the deformation of porous nickel oxide cathode materials in MCFC
751
A study on the degradation property of a hydrophilic polycarbonate film treated by inductively coupled plasma using CO2 as reactive gas
752
A study on the degree of deliberation and meditation of cyber poll respondents for nuclear-related decision making
753
A study on the dependence of DC electrical properties and nanostructure of Cu thin films on film thickness
754
A study on the dependence of structure of multi-walled carbon nanotubes on acid treatment
755
A study on the deposition efficiency, porosity and redox behavior of Prussian blue thin films using an EQCM
756
A Study on the Deposition of Tin on the Contac ts Subjected to High Frequency Impact Loading in Semiconductor Device Testing
757
A Study on the Derivation of a Mean Velocity Formula from Chiu’s Velocity Formula and Bottom Shear Stress
758
A study on the design and analysis of a heat pump heating system using wastewater as a heat source
759
A study on the determinants of business stability in credit card firms: Evidence from Korea
760
A study on the determination of burning velocities of LFG and LFG-mixed fuels
761
A study on the determination of chromium as chromate at a carbon paste electrode modified with surfactants
762
A STUDY ON THE DETERMINATION OF GENOTYPIC VARIATION FOR SEED YIELD AND ITS UTILIZATION THROUGH SELECTION IN DURUM WHEAT (Triticum durum Desf.) MUTANT POPULATIONS
763
A study on the determination of plastic properties of metals by instrumented indentation using two sharp indenters
764
A study on the determination of the reactions of lines of Tir wheat to yellow rust (Puccinia striiformis f.sp. tritici)
765
A study on the development and application of the E/V shaft cooling system to reduce stack effect in high-rise buildings
766
A Study on The Development and The Current Situation of Ornamental Plants Sector in TR83 Region
767
A Study on the Development and Validation of an EAP Teachers Identity Questionnaire in the Iranian Context
768
A study on the development and wear characteristics of rheocast Al–5Cu–2Pb alloy and Al–5Cu/Pb–18Sn wire composites
769
A study on the development and wear characteristics of rheocast Al–5Cu–2Pb alloy and Al–5Cu/Pb–18Sn wire composites
770
A study on the development of a compensation method for humidity effect in QCM sensor responses
771
A study on the development of a composite ceramic tool ZrO2/(W, Ti)C and its cutting performance
772
A Study on the Development of a Mathematics Creativity Scale
773
A study on the development of a multi-purpose spindle system for quality productive machining
774
A study on the development of a substitution process by powder metallurgy in automobile parts
775
A study on the development of a task complexity measure for emergency operating procedures of nuclear power plants
776
A study on the development of a task complexity measure for emergency operating procedures of nuclear power plants
777
A Study on the Development of Baju Kurung Design in the Context of Cultural Changes in Modern Malaysia
778
A study on the development of center carrier type progressive die for U-bending part process
779
A study on the development of composite membranes for the separation of organic vapors
780
A study on the development of CVD precursors V – syntheses and characterization of new N-alkoxy-β-ketoiminate complexes of titanium
781
A Study on the Development of Entrepreneurship Skills of Agricultural Applied-Scientific Students in East Azerbaijan Province, Iran
782
A study on the development of hypo-stoichiometric Zr-based hydrogen storage alloys with ultra-high capacity for anode material of Ni/MH secondary battery
783
A Study on the Development of Key Performance Indicators (Kpis) at an Aerospace Manufacturing Company
784
A study on the development of large aluminum flange using the casting/forging process
785
A study on the development of the laser-assisted milling process and a related constitutive equation for silicon nitride
786
A study on the development of the wire woven heat exchanger using small diameter tubes
787
A Study on the Difference Between Radical Innovation and Incremental Improvement in Pre-Development Practices of NPD Projects
788
A study on the differential and subdifferential of fuzzy mapping and its application problem
789
A study on the diffusion kinetics of borides on boronized Cr-based steels
790
A study on the dimension of global sections of adjoint bundles for polarized manifolds
791
A study on the -dimensional and the -dimensional higher-order Burgers equations
792
A Study on the Direct and Indirect Costs of Multiple Sclerosis Based on Expanded Disability Status Scale Score in Khuzestan, Iran
793
A study on the direct leakage of rotary air preheater with multiple seals
794
A Study on the Dispersion of NiO and/or WO3 on Anatase
795
A Study on the Distribution of Chlorination By-Products (CBPs) In Treated Water in Korea
796
A study on the distributions of the measured fluctuating wind velocity components
797
A Study on the Diversity and Relative Abundance of Insect Fauna in Wukari, Taraba State, Nigeria
798
A study on the diversity of the moth community in the North Dagang Wetland Nature Reserve, Tianjin, China
799
A Study on the DNA Cleavage, Morphological Changes and Cytotoxicity Activities of the Two Synthetic COX-2 Inhibitors
800
A study on the drilling of composite and titanium stacks
801
A Study on the Drive at Center of Gravity (DCG) Feed Principle and Its Application for Development of High Performance Machine Tool Systems
802
A study on the dropping out from prophylactic therapy in patients with febrile convulsions
803
A study on the dual emissions of organic light emitting devices
804
A study on the dual integral of J
805
A study on the dual vanishing point property
806
A study on the dual vanishing point property
807
A study on the dynamic behavior of a sulfur trioxide decomposer for a nuclear hydrogen production
808
A study on the dynamic behavior of the Meuse/Haute-Marne argillite
809
A study on the dynamic combustion behavior of a biomass fuel bed
810
A Study on the Dynamic Performance for Hydraulically Damped Rubber Bushings with Multiple Inertia Tracks and Orifices: Parameter Identification and Modeling
811
A study on the dynamic stability of a cylindrical shell conveying a pulsatile flow of hot fluid
812
A study on the dynamic stability of plates under a follower force
813
A study on the dynamics of rotating beams with functionally graded properties
814
A study on the economic efficiency of hydrogen production from biomass residues in China
815
A study on the effect of a dynamic contact force control for improving electrospark coating properties
816
A study on the effect of advertisements on customersʹʹ willingness to accept banking services based on modulatory role of brand: A case study of Bank Parsian
817
A study on the effect of annealing treatment on the electrochemical properties of La0.67Mg0.33Ni2.5Co0.5 alloy electrodes
818
A Study on the Effect of Applying Cast Splints in Treatment of Tennis Elbow
819
A study on the effect of board of directors on the rate of corporate transparency
820
A study on the effect of brand experience on consumer purchase experiences: A case study of food industry
821
A Study on the Effect of Cimetidine on Myoglobinuric Acute Kidney Injury in Male Rats
822
A Study on the Effect of Cinnamon Powder in Diet on Serum Glucose Level in Broiler Chicks
823
A Study on the Effect of Coke Particle Size and Applied Compacting Pressure on the Physical Properties of Electrographite Brushes
824
A study on the effect of cold rolling and annealing on special grain boundary fractions in commercial-purity nickel
825
A study on the effect of cold rolling and annealing on special grain boundary fractions in commercial-purity nickel
826
A study on the effect of crack on free vibration of thick rectangular plates with initial geometric imperfection using differential quadrature method
827
A Study on the Effect of Deep and Differential Depths Placement of Fertilizers on Potato Crop Response
828
A Study on the Effect of Different Concentration of Plant Hormones (BAP, NAA, 2, 4-D, and Kinetin) on Callus Induction in Brassica Napus
829
A study on the effect of different factors on e-Commerce adoption among SMEs of Malaysia
830
A study on the effect of different factors on profitability of banking system
831
A study on the effect of different vibration-assisted methods in micro-WEDM
832
A Study on the Effect of Domestic and Foreign Mass Media on the Rate of Awareness of Citizenship Rights
833
A Study on the Effect of Domestic and Foreign Mass Media on the Rate of Awareness of Citizenship Rights (Case Study: Yasuj)
834
A study on the effect of earnings management on restatement and the changes on information content of earnings following restatements: Evidence from Tehran Stock Exchange
835
A Study on the Effect of Education by Using Simulation on Post partum Visual Blood Loss Estimation
836
A study on the effect of electronic engine speed regulator on agricultural tractor ride vibration behavior
837
A Study on the Effect of Emotional and Cognitive Motives on the Sustainable Clothing Consumption Behavior
838
A study on the effect of emotional intelligence on retail investors’ behavior
839
A Study on the Effect of Endophyte Fungus, Piriformospora Indica, on the Yield and Phytochemical Changes of Globe Artichoke (Cynara Scolymus L.) Leaves Under Water Stress
840
A study on the effect of externally bonded composite plate–concrete interfaces
841
A study on the effect of financial reports on firms’ share value
842
A study on the effect of fine mineral powders with distinct vitreous contents on the fluidity and rheological properties of concrete
843
A study on the effect of flaw detection probability assumptions on risk reduction achieved by non-destructive inspection
844
A study on the effect of flaw detection probability assumptions on risk reduction achieved by non-destructive inspection
845
A Study on the Effect of Fluctuations in Tax Revenues on Economic Growth in Iran
846
A study on the effect of free cash flow and profitability current ratio on dividend payout ratio: Evidence from Tehran Stock Exchange
847
A study on the effect of GnRH administration on the ovarian response of Awassi ewes treated with eCG to induce superovulation
848
A Study on the Effect of Granular Residual in the Banking Network on the Transmission of Monetary Policy through Lending Channel
849
A Study on the Effect of Gratitude on Happiness and Well Being
850
A study on the effect of green marketing on consumers’ purchasing intention
851
A study on the effect of heat treatment on functional groups of pitch based activated carbon fiber using FTIR Original Research Article
852
A study on the effect of human resource management on financial performance: A case study of Bank Melli Esfahan using Harvard method
853
A study on the effect of husbands attendance in the delivery ward on the duration of labor and mode of delivery in primigravid women
854
A study on the effect of hydrogen in the compounds with BaCd11-type structure
855
A study on the effect of intellectual capital on firm performance: Evidence from Tehran Stock Exchange
856
A study on the effect of interest rate on performance of stock exchange: A case study of Tehran Stock Exchange
857
A study on the effect of internet on competitiveness and customer loyalty in insurance industry based on Porter competitive forces
858
A study on the effect of irradiation dose and storage on the ESR signal in the cuticle of Pink shrimp (Pandalus montagui) from different geographical regions
859
A study on the effect of knowledge management on customer orientation in governmental organization
860
A study on the effect of knowledge management on job satisfaction: A case study of texture industry
861
A Study on the Effect of L-Carnitine on Myoglobinuric Acute Kidney Injury in Male Rats
862
A Study on the Effect of Lecture and Multimedia Software on Drug Calculation and Prescription: A Systematic Review
863
A study on the effect of leverage on firms’ management opportunism behavior
864
A study on the effect of Lewis acid catalysis on the molecular mechanism of the cycloaddition between (E)-methyl cinnamate and cyclopentadiene
865
A study on the effect of lithium insertion–extraction on the local structure of lithium manganese oxides using X-ray absorption spectroscopy
866
A study on the effect of macroeconomics instability index on private investment in Iran
867
A study on the effect of manager’s leadership style to create innovation among employees
868
A study on the effect of melt-intercalation of PEO in HNbWO6 Original Research Article
869
A Study on the Effect of Metaphor Awareness Raising on Chinese EFL Learners’ Vocabulary Acquisition and Retention
870
A Study on the effect of moist-chilling and GA3 application on evening primrose (Oenothera biennis L.) seed germination
871
A study on the effect of more volatile fuel on evaporation and ignition for emulsified oil
872
A Study on the Effect of Nitrate and Phosphate Concentrations on the Production of Mycosporine-Like Amino Acids by Chlorella Vulgaris
873
A study on the effect of organizational climate on organizational commitment: A case study of educational system
874
A Study on the Effect of Organizational Justice and Commitment on the Organizational Citizenship Behavior
875
A study on the effect of organizational justice on organizational citizenship and organizational commitment
876
A study on the effect of organizational learning on organizational performance with an emphasis on dynamic capacity
877
A study on the effect of organizational trust on learning organizations
878
A study on the effect of P/E and PEG ratios on stock returns: Evidence from Tehran Stock Exchange
879
A study on the effect of para substitution on the thermal degradation of poly N-arylmaleimides
880
A study on the effect of particle size on coal flotation kinetics using fuzzy logic
881
A study on the effect of performance based budgeting using activity based cost method
882
A Study on the Effect of Peristalsis and Cilia of MHD Micropolar Fluid Flow through an Inclined Porous Channel
883
A study on the Effect of Planned Behavior on Performance by Moderating Role of Individual – organization proportionality among Staff of Ardabil University of Medical Sciences
884
A study on the effect of plasma electrolytic oxidation on the stress corrosion cracking behaviour of a wrought AZ61 magnesium alloy and its friction stir weldment
885
A study on the effect of power transformation in the ARMA(p,q) model
886
A study on the effect of process parameters in stirred ball mill
887
A study on the effect of product quality on behavioral and attitudinal loyalty: A case study of SME companies
888
A study on the effect of recent financial turmoil on performance of petrochemical industries: Evidence from Tehran Stock Exchange
889
A STUDY ON THE EFFECT OF SELF-REGULATION AND THE DEGREE OF WILLINGNESS TO COMMUNICATE ON ORAL PRESENTATION PERFORMANCE OF EFL LEARNERS
890
A Study on the Effect of Sildenafil Citrate on Acute Renal Ischemic-Reperfusion Injury in Male Rats
891
A study on the effect of size and ratio of book value to market value on excessive return
892
A study on the effect of social capital on job satisfaction and citizenship behaviour
893
A study on the effect of social capital on learning organization: A case study of Jihad Agriculture Organization of Kermanshah, Iran
894
A study on the effect of sodium chloride deposition on an FCC catalyst in a cyclic deactivation unit Original Research Article
895
A study on the effect of spatial scale on the parameters of a sediment transport equation for sheetwash
896
A study on the effect of stiffeners on quasi-static crushing of stiffened square tube with non-linear finite element method
897
A study on the effect of stock liquidity and stock liquidity risk on information asymmetry: Evidence from Tehran Stock Exchange
898
A study on the effect of supportʹs reducibility on the reverse water-gas shift reaction over Pt catalysts Original Research Article
899
A study on the effect of surface orientation on erosion wear of flat specimens moving in a solid–liquid suspension
900
A study on the effect of surface topography on rough friction in roller contact
901
A study on the effect of technology parameters on 3D geometric surface parameters in ball-end milling process
902
A study on the effect of teleworking on quality of work life
903
A study on the effect of the clearance on the contact stresses and kinematics of polymeric composite journal bearings under reciprocating sliding conditions
904
A study on the effect of the die transverse angle and the part rotational feed angle in the cold radial forging process of rods
905
A study on the effect of the innovation management on entrepreneurial activities in Iran and the state-members of GEM
906
A study on the effect of the type and content of filler in epoxy–glass composite system on the friction and slide wear characteristics
907
A study on the effect of thermo-mechanical parameters on the deformation behavior of Mg–3Al–1Zn
908
A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide
909
A study on the effect of training interval on the use of computerized emergency operatingprocedures
910
A study on the effect of training interval on the use of computerized emergency operatingprocedures
911
A study on the effect of transitional spaces on summer thermal comfort and annual energy consumption in different climates
912
A study on the effect of ultrasound on electrochemical phenomena
913
A study on the effect of ultrasound on electrochemical phenomena
914
A study on the effect of various plasticizers in poly(vinyl acetate)-poly(methyl methacrylate) based gel electrolytes
915
A study on the effect of vibration parameters on the shot velocity in SMAT process using dynamic nite element analysis
916
A study on the effect of virtual communication skills education with a cognitive-behavioral approach on communication skills of midwifery personnel in healthcare centers
917
A study on the effect of workaholism on human resource productivity: A case study of managers of East Azerbaijan Water and Waste Water Company
918
A study on the effect of working capital management on profitability on Cement and Petrochemical industries: Evidence from Tehran Stock Exchange
919
A Study on the Effective Factors in the Vitality of Residential Complexes The Case Study of Azadegan, Lakan and Golsar Residential Complexes in Rasht
920
A Study on the Effectiveness of Artificial Intelligence Approach on Sustainable and Intelligent Supply Chain Management in Food Industry
921
A STUDY ON THE EFFECTIVENESS OF DIGITAL MARKETING
922
A Study on the Effectiveness of SNMP OID Compression
923
A Study on the Effects of Acetly-11-Keto-β-Boswellic Acid Against Dextran Sodium Sulfate Induced Acute and Chronic Colitis in Swiss Albino Mice
924
A study on the effects of advertisement on brand equity: Evidence from mobile industry
925
A study on the effects of banks’ cash management on their share value
926
A study on the effects of catalysts on pyrolysis and combustion characteristics of Turkish lignite in oxy-fuel conditions
927
A Study on the Effects of Chilling Period on Sperm Quality of Sannan and Jamunapari Goats
928
A Study on the Effects of Damage Models and Wavelet Bases for Damage Identification and Calibration in Beams
929
A study on the effects of dented surfaces on rolling contact fatigue
930
A study on the effects of different factors influencing on customer loyalty, profitability and word of mouth advertisement for gaining competitive advantage in tourism industry
931
A Study on The Effects of Different Pad Materials on Brake System Performance of a High-Capacity Elevator by FEM Simulation
932
A study on the effects of different temperatures on protein changes in the salivary glands of Hyalomma anatolicum anatolicum and Boophilus annulatus
933
A study on the effects of dissolved hydrogen on zirconium alloys corrosion
934
A study on the effects of double skin façades on the energy management in buildings
935
A study on the effects of drying conditions on the stability of NaNd(CO3)2·6H2O and NaEu(CO3)2·6H2O
936
A Study on the Effects of EGR and VNT on the Intake and Exhaust Pressure Waves in a High-Pressure Common-Rail Diesel Engine
937
A study on the effects of ESFAS STI modification on the unavailability of ESF actuated components
938
A study on the effects of Fex/Niy/MgO(1−x−y) catalysts on the volumetric and electrochemical hydrogen storage of multi-walled carbon nanotubes
939
A study on the effects of high pressure and heat on Bacillus subtilis spores at low pH
940
A study on the effects of human resource management on making change within organization: A case study of banking industry
941
A study on the effects of human resources management on employee performance
942
A study on the effects of human resources strategies on the organizational performance: Evidence from Pharmaceutical industry
943
A study on the effects of intellectual capital efficiency on economic performance
944
A study on the effects of inter-organizational factors on the supply chain performance
945
A study on the effects of machining-induced residual stress on rolling contact fatigue
946
A study on the effects of marketing communication using integrated marketing communication
947
A Study on the Effects of Modulation of Intracellular Calcium on Excisional Wound Healing in Rabbit
948
A Study on the Effects of Noise on Industrial Workers in Malaysia
949
A Study on the Effects of Operating Parameters on the Degradation of Oxalic Acid in a Photocatalytic Reactor using Computational Fluid Dynamics
950
A study on the effects of operational parameters on bed-to-wall heat transfer
951
A study on the effects of organizational structure on success of performance measurement
952
A Study on the Effects of Perovskia abrotanoides Karel on Experimental Skin Burn in Male Rat: in-vivo and in-vitro Findings
953
A study on the effects of personality traits on building effective relationships
954
A STUDY ON THE EFFECTS OF PLAY-BASED SOCIAL SKILLS TRAINING ON SOCIAL SKILLS OF SIX-YEAR-OLD CHILDREN
955
A Study on the Effects of Polite Yawning Technique on Rehabilitation of Olfaction After Total Laryngectomy
956
A STUDY ON THE EFFECTS OF PRESCHOOL EDUCATION ON PRIMARY FIRST GRADERSʹ SCHOOL PREPAREDNESS
957
A study on the effects of productivity of human resources in banking network and work ethics
958
A STUDY ON THE EFFECTS OF PROJECT APPROACH EDUCATION ON THE DEVELOPMENTAL AREAS OF SIX-YEAR OLD CHILDREN
959
A study on the effects of promising edible and non-edible biodiesel feedstocks on engine performance and emissions production: A comparative evaluation
960
A study on the effects of quarterly financial reports on systematic risk and return on assets: A case study of Tehran Stock Exchange
961
A study on the effects of remote working on quality of services: A SERVQUAL survey on central office of Tehran municipality
962
A STUDY ON THE EFFECTS OF SAHIBABAD SQUARE IN TABRIZ UPON THE FORMATION OF NAGHSH-E-JAHAN SQUARE IN ISFAHAN
963
A study on the effects of sales related factors on brand equity
964
A study on the effects of seismicity on subsidence in foreland basins: An application to the Venice area
965
A study on the effects of service quality on brand personality: Evidence from Hotel industry
966
A study on the effects of state ownership on auditing cost
967
A study on the effects of subgrid-scale representation of land use on the boundary layer evolution using a 1-D model
968
A study on the effects of subsidies on market value of listed companies in Tehran Stock Exchange
969
A study on the effects of subsidies on market value: Evidence from Petrochemical and steel industries
970
A study on the effects of the estrous cycle on uterine fluid and blood serum immunoglobulin G (IgG) content in the cow
971
A study on the effects of the neutral inductor on the modeling and performance of a four-wire three-phase/switch/level fixed-frequency rectifier Original Research Article
972
A study on the effects of thermal, luminous, and acoustic environments on indoor environmental comfort in offices
973
A Study on the Effects of Waste Rubber Tire Dimensions on Fine-Grained Soil Behavior
974
A Study on the Efficacy of ENGAGE Model in Improving Speaking Components of EFL Learners: A Comparative Methodological Approach
975
A study on the efficacy of late lingual nerve repair
976
A study on the efficacy of TCA CROSS for the management of acne scars
977
A study on the efficiency of EFQM versus Bass method: Evidence from national land and housing organization
978
A study on the efficiency of electrochemical realkalisation of carbonated concrete
979
A study on the efficiency of grid-like spatial screens as a measure of protection against LEMP ☆
980
A study on the electrical conductivity of multi-walled carbon nanotube aqueous solution
981
A study on the electrical discharge machining of conductive ceramics
982
A study on the electrical properties of fluorine doped direct-patternable SnO2 thin films
983
A study on the electrical properties of Pb(Zr, Ti)O3 thin films crystallized by the electrical resistive heating of Pt thin film
984
A study on the electrical switching mechanism in [TBA]x[Ni(dmid)2] thin film materials by XPS
985
A study on the electrochemical characteristics of LiFePO4 cathode for lithium polymer batteries by hydrothermal method
986
A study on the electrochemical deposition behavior of uranium ion in a LiCl–KCl molten salt on solid and liquid electrode
987
A study on the electrodeposited Ni–S alloys as hydrogen evolution reaction cathodes
988
A study on the electrohydrodynamic flow in a rectangular impactor with positive corona discharge
989
A study on the electroless Ni–P deposition on WE43 magnesium alloy
990
A study on the electrolytic in-process dressing (ELID) for silica glass in a ductile mode
991
A study on the electron transport properties of TiO2 electrodes in dye-sensitized solar cells
992
A study on the electronic and charge transfer properties in tin phthalocyanine (SnPc) derivatives by density functional theory
993
A Study on the Electronic and Structural Properties of C12X8 (X = C, B) and Their Interaction with Glycine with Potentially Drug Delivery Vessels
994
A Study on the Electronic Effect of Reactions of (pi)-Allylpalladiums Using 2-Arylsulfonyloxy-3chloropropenes with Ethyl Malonate and Their Synthetic Utilization
995
A study on the electrophoretic deposition of 8YSZ coating using mixture of acetone and ethanol solvents
996
A study on the emulsification of oil by power ultrasound
997
A study on the emulsification of oil by power ultrasound
998
A study on the energy consumption unit of subway stations in Korea
999
A study on the energy dissipation of several different CFRP-based targets completely penetrated by a high velocity projectile
1000
A study on the energy distribution for grid-assisting magnetron sputtering