بر اساس عنوان

1
Development of a directly bonded aluminum/alumina power electronic substrate
2
Development of a Disaster Relief Logistics Model Minimizing the Range of Delivery Time
3
Development of a Discrete Event Simulation Model to Minimize the Waiting Time of Patients in Hospitals
4
Development of a discrete Reissner–Mindlin element on Winkler foundation
5
Development of a discriminatory biocompatibility testing model for non-precious dental casting alloys
6
Development of a dish-based food frequency questionnaire for Iranian population
7
Development of a disperse dye immunochromatographic test for the detection of antibodies against infectious bursal disease virus
8
Development of a disperse dye immunochromatographic test for the detection of antibodies against infectious bursal disease virus
9
Development of a dispersion process for carbon nanotubes in ceramic matrix by heterocoagulation Original Research Article
10
Development of a Dispersive Liquid-Liquid Microextraction for the Spectrophotometric Determination of Penicillin G in Milk and Biological Samples
11
Development of a dispersive liquid–liquid microextraction method for organophosphorus flame retardants and plastizicers determination in water samples
12
Development of a dispersive liquid–liquid microextraction method for the determination of fluoroquinolones in chicken liver by high performance liquid chromatography Original Research Article
13
Development of a dispersive liquid–liquid microextraction method for the simultaneous determination of the main compounds causing cork taint and Brett character in wines using gas chromatography–tandem mass spectrometry
14
Development of a Dispersive Liquid–Liquid Microextraction Technique for the Extraction and Spectrofluorimetric Determination of Fluoxetine in Pharmaceutical Formulations and Human Urine
15
Development of a dispersively accurate conservative level set scheme for capturing interface in two-phase flows
16
Development of a disposable amperometric immunosensor for the detection of ecstasy and its analogues using screen-printed electrodes Original Research Article
17
Development of a Disposable Amperometric NH^+4 Biosensor Based on a Chemically Modified Screen-Printed Carbon Electrode Coated with Gintamate Dehydrogenase, 2-Oxoglutarate, and NADH
18
Development of a Disposable Amperometric NH^+4 Biosensor Based on a Chemically Modified Screen-Printed Carbon Electrode Coated with Gintamate Dehydrogenase, 2-Oxoglutarate, and NADH
19
DEVELOPMENT OF A DISPOSABLE BIOSENSOR FOR THE DETECTION OF METAM-SODIUM AND ITS METABOLITE MITC
20
Development of a Disposable Electrochemical Sensor based on Nanocomposite/Ionic Liquid Assisted Hollow Fiber-Graphite Electrode for Measurement of Lorazepam Using Central Composite Design
21
Development of a disposable immunosensor for the detection of human heart fatty-acid binding protein in human whole blood using screen-printed carbon electrodes
22
Development of a disposable mercury ion-selective optode based on trityl-picolinamide as ionophore Original Research Article
23
Development of a Disposable Organophosphate Biosensor
24
Development of a Disposable Organophosphate Biosensor
25
Development of a disposable potentiometric antibody immobilized ZnO nanotubes based sensor for the detection of C-reactive protein
26
Development of a Disposable Screen Printed Amperometric Biosensor Based on Glutamate Dehydrogenase, for the Determination of Glutamate in Clinical and Food Applications
27
Development of a distance-to-roadway proximity metric to compare near-road pollutant levels to a central site monitor
28
Development of a distributed flow model for underpinning assessment of water allocation options in the Namoi River Basin, Australia
29
Development of a distributed, fully automated, bidirectional telemetry system for amperometric microsensor and biosensor applications
30
Development of a distributed-parameter model for the evaporation system in a supercritical W-shaped boiler
31
Development of a distributive control scheme for fluorescent lighting based on LonWorks technology
32
Development of a DNA Aptamer for Screening Neisseria meningitidis Serogroup B by Cell SELEX
33
Development of a DNA chip microarray using hydrophobic interaction between template and particle by using the random fluidic self-assembly method
34
Development of a DNA chip microarray using hydrophobic interaction between template and particle by using the random fluidic self-assembly method
35
Development of a DNA microarray for detection and identification of Legionella pneumophila and ten other pathogens in drinking water
36
Development of a DNA vaccine against hirame rhabdovirus and analysis of the expression of immune-related genes after vaccination
37
Development of a DNA-damaging ferrocene amino acid
38
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model
39
Development of a domestic concentrating cooker
40
Development of a Doppler broadening positron spectroscopy setup and relative positron-electron momentum distribution measurement for commercial Al
41
Development of a dose-response relationship for Escherichia coli O157:H7
42
Development of a double acting free piston expander for power recovery in transcritical CO2 cycle
43
Development of a double allylboration reagent targeting 1,5-syn-(E)-diols: application to the synthesis of the C(23)–C(40) fragment of tetrafibricin
44
Development of a double allylboration reagent targeting 1,5-syn-(E)-diols: application to the synthesis of the C(23)–C(40) fragment of tetrafibricin [Tetrahedron 67 (35) (2011) 6497–6512]
45
Development of a Double Glass Mounting Method Using Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) and its Evaluation for Permanent Mounting of Small Nema¬todes
46
Development of a double metal, AC-coupled silicon pad detector
47
Development of a double metal, AC-coupled silicon pad detector
48
Development of a double sided stitching interferometer for wafer characterization
49
Development of a double-microcantilever for surface stress measurement in microsensors
50
Development of a double-phase Xenon cell using micromegas charge readout for applications in dark matter physics
51
Development of a double-phase Xenon cell using micromegas charge readout for applications in dark matter physics
52
Development of a double-torsion fracture test to predict channelized crack behaviors of asphalt concrete
53
Development of a dovetail fretting fatigue fixture for turbine engine materials
54
Development of a downscale sedimentation field flow fractionation device for biological event monitoring
55
Development of a downstream process for the isolation of Staphylococcus aureus arsenate reductase overproduced in Escherichia coli
56
Development of a Downy Mildew Advisory Model Based on Downcast
57
Development of a Draft British Standard: the Assessment of Heat Strain for Workers Wearing Personal Protective Equipment
58
Development of a Draft British Standard: the Assessment of Heat Strain for Workers Wearing Personal Protective Equipment
59
Development of a draft-tube airlift bioreactor for Botryococcus braunii with an optimized inner structure using computational fluid dynamics
60
Development of a dragonfly awareness trail in an African botanical garden Original Research Article
61
Development of a drilling burr control chart for low alloy steel, AISI 4118
62
Development of a drinking water regulation for perchlorate in California Original Research Article
63
Development of a driving cycle for Hong Kong
64
Development of a driving cycle for intra-city buses in Chennai, India
65
Development of a drowsiness warning system based on the fuzzy logic images analysis
66
Development of a drug delivery system for the treatment of periodontal disease based on bioerodible poly(ortho esters)
67
Development of a dryer with airflow reversal and a pneumatic system for grain movement
68
Development of a drying model for combined microwave–fan-assisted convection drying of spinach
69
Development of a DSP-based real-time position calculation circuit for a beta camera
70
Development of a DSP-based real-time position calculation circuit for a beta camera
71
Development of a dual conical spouted bed system for heat integration purposes
72
Development of a dual fluorogenic and chromogenic dipeptidyl peptidase IV substrate
73
Development of a dual functional structured catalyst for partial oxidation of methane to syngas
74
Development of a dual phase steel using orthogonal design method
75
Development of a dual-color fluorescence in situ hybridization probe set on chromosome 6q to improve cytogenetic diagnosis of lymphoid malignancies
76
Development of a dual-functional Pt–Fe-HAP magnetic nanoparticles application for chemo-hyperthermia treatment of cancer
77
Development of a dual-layered dielectric-loaded accelerating structure
78
Development of a dual-layered dielectric-loaded accelerating structure
79
Development of a dual-mode demand control ventilation strategy for indoor air quality control and energy saving
80
Development of a Duothermal Soldering Process
81
Development of a durable fiber-optic oxygen sensor for harsh underground environments
82
Development of a dynamic Chest Wall and operating table simulator to enhance congenital heart surgery simulation
83
DEVELOPMENT OF A DYNAMIC EVENT TREE FOR A PRESSURIZED WATER REACTOR STEAM GENERATOR TUBE RUPTURE EVENT
84
Development of a dynamic growth–death model for Escherichia coli O157:H7 in minimally processed leafy green vegetables
85
Development of a dynamic headspace solid-phase microextraction procedure coupled to GC–qMSD for evaluation the chemical profile in alcoholic beverages Original Research Article
86
Development of a dynamic model describing nitritification and nitratification in trickling filters
87
Development of a dynamic model for a DX VAV air conditioning system
88
Development of a dynamic model for cleaning ultra filtration membranes fouled by surface water
89
Development of a dynamic model for estimating the food web transfer of chemicals in small aquatic ecosystems Original Research Article
90
Development of a dynamic model for the lung lobes and airway tree in the NCAT phantom
91
Development of a dynamic multiple reaction monitoring method for determination of digoxin and six active components of Ginkgo biloba leaf extract in rat plasma
92
Development of a Dynamic Population Balance Plant Simulator for Mineral Processing Circuits
93
Development of a dynamic regenerative fuel cell system
94
Development of a dynamic stiffness matrix for free vibration analysis of spinning beams
95
Development of a dynamic strategy planning theory and system for sustainable river basin land use management
96
Development of a dynamical systems model of plant programmatic performance on nuclear power plant safety risk
97
Development of a dynamical systems model of plant programmatic performance on nuclear power plant safety risk
98
Development of a EFG formulation for damage analysis of reinforced concrete beams
99
Development of a Elliptical Vibration Milling Machine
100
Development of a European Combined Geodetic Network (ECGN)
101
Development of a fabrication technology for double-sided AC-coupled silicon microstrip detectors
102
Development of a fabrication technology for double-sided AC-coupled silicon microstrip detectors
103
Development of a facility-based environmental performance indicator related to sustainable development
104
Development of a Faraday polarimeter for magnetic field measurements in a discharge channel for ion beam transport
105
Development of a Faraday polarimeter for magnetic field measurements in a discharge channel for ion beam transport
106
Development of a Faraday polarimeter for magnetic field measurements in a discharge channel for ion beam transport
107
Development of a fast 12-bit ADC for a nuclear spectroscopy system
108
Development of a fast 12-bit ADC for a nuclear spectroscopy system
109
Development of a fast 3D thermal-hydraulic tool for design and safety studies for HTRS Original Research Article
110
Development of a fast analytical method for the individual determination of pyrethrins residues in fruits and vegetables by liquid chromatography–tandem mass spectrometry
111
Development of a fast analytical tool to identify oil spillages employing infrared spectral indexes and pattern recognition techniques
112
Development of a fast and accurate method of 13C NMR chemical shift prediction
113
DEVELOPMENT OF A FAST AND EFFICIENT SEPARATION FOR SHORT-LIVED PLUTONIUM ISOTOPES PRODUCED IN ACCELERATOR-BASED IRRADIATIONS
114
Development of a fast and efficient ultrasonic-based strategy for DNA fragmentation
115
Development of a fast and non-destructive procedure for characterizing and distinguishing original and fake euro notes Original Research Article
116
Development of a fast and reliable method for long- and short-term wine age prediction
117
Development of a fast and selective separation method to determine histamine in tuna fish samples using capillary zone electrophoresis
118
Development of a fast and simple immunochromatographic method to purify alpha 1-acid glycoprotein from serum for analysis of its isoforms by capillary electrophoresis Original Research Article
119
Development of a fast and simple liquid chromatography–tandem mass spectrometry method for the quantitation of argatroban in patient plasma samples
120
Development of a Fast Breeder Reactor Fuel Bundle-Duct Interaction Analysis Code BAMBOO: Analysis Model and Validation by the Out-of-Pile Compression Test
121
Development of a fast capillary electrophoresis method for determination of carbohydrates in honey samples
122
Development of a fast capillary electrophoresis method for determination of creatinine in urine samples
123
Development of a fast capillary electrophoresis method for the determination of propranolol—Total analysis time reduction strategies
124
Development of a fast capillary electrophoresis method to determine inorganic cations in biodiesel samples Original Research Article
125
Development of a fast capillary electrophoresis-time-of-flight mass spectrometry method for the speciation of organotin compounds under separation conditions of high electrical field strengths
126
Development of a fast empirical design model for PEM stacks
127
Development of a fast gaseous detector: ‘Micromegas’
128
Development of a fast gaseous detector: ‘Micromegas’
129
Development of a fast H1 trigger using silicon pad detectors
130
Development of a fast H1 trigger using silicon pad detectors
131
Development of a fast multiresidue method for the determination of pesticides in dry samples (wheat grains, flour and bran) using QuEChERS based method and GC–MS
132
Development of a fast neutron imaging system for investigating two-phase flows in nuclear thermal–hydraulic phenomena: A status report
133
Development of a fast neutron radiography converter using wavelength-shifting fibers
134
Development of a fast neutron radiography converter using wavelength-shifting fibers
135
Development of a fast pad readout system for the HADES shower detector
136
Development of a fast pad readout system for the HADES shower detector
137
Development of a fast proton range radiography system for quality assurance in hadrontherapy
138
Development of a fast proton range radiography system for quality assurance in hadrontherapy
139
Development of a fast readout system of an X-ray CCD
140
Development of a fast readout system of an X-ray CCD
141
Development of a fast robust derivatization method of an extremely polar PET radiopharmaceutical: a critical aspect for starting a clinical trial
142
Development of a fast sensor for the measurement of the residence time distribution of gas flow through microstructured reactors
143
Development of a fast time-to-digital converter using a programmable gate array
144
Development of a fast transient simulator for gas–liquid two-phase flow in pipes
145
Development of a fast voltage control method for electrostatic accelerators
146
Development of a fast voltage control method for electrostatic accelerators
147
Development of a fast, thermal neutron, and gamma ray component discriminator
148
Development of a fast, thermal neutron, and gamma ray component discriminator
149
Development of a fast-response/high-sensitivity double wall carbon nanotube nanostructured hydrogen sensor
150
Development of a fatigue testing system for thin films
151
Development of a feasibility prediction tool for solar power plant installation analyses
152
Development of a feedback system to control MHD instabilities in ASDEX Upgrade
153
Development of a Fe–He interatomic potential based on electronic structure calculations
154
Development of a FEM, FIM-AP system for studying gridded vacuum microelectronic devices
155
Development of a femtosecond soft X-ray SASE FEL at DESY
156
Development of a femtosecond soft X-ray SASE FEL at DESY
157
Development of a fermentation process for production of calcium-l-lactate
158
Development of a fiber coating based on molecular sol–gel imprinting technology for selective solid-phase micro extraction of caffeine from human serum and determination by gas chromatography/mass spectrometry Original Research Article
159
Development of a fiber-in-tube microextraction protocol for gas chromatography–electron capture detection of hexachlorocyclohexanes in water samples Original Research Article
160
Development of a fiber-optic sensor based on surface plasmon resonance on silver film for monitoring aqueous media
161
Development of a fibre-optic sensor for partial discharges in oil-filled power transformers
162
Development of a Field Bioassay for the Side Effects of Pesticides on Decomposition
163
Development of a field test for evaluating aerobic fitness in middle-aged adults: Validity of a 15-m incremental shuttle walk and run test
164
Development of a field well head safety system for use with radiation generating devices
165
Development of a field-level geographic information system
166
Development of a field-portable fluorometer based on deep ultraviolet LEDs for the detection of phenanthrene- and tryptophan-like compounds in natural waters
167
Development of a FI-HG-ICP-OES solid phase preconcentration system for inorganic selenium speciation in Argentinean beverages
168
Development of a filled resin system for the TF coils of ITER
169
Development of a filter for operation of atmospheric Cherenkov telescopes close to the Moon
170
Development of a filter for operation of atmospheric Cherenkov telescopes close to the Moon
171
Development of a Finger Painting-Based Creativa Module for Writing Beginnings for Children with Attention Deficit Hyperactive Disorders
172
Development of a fingerprint of Salvia miltiorrhiza Bunge by high-performance liquid chromatography with a coulometric electrode array system
173
Development of a Finite Element Methodology for Flexible Track Models in Railway Dynamics Applications
174
Development of a finite element model for the identification of mechanical and piezoelectric properties through gradient optimisation and experimental vibration data
175
Development of a finite element simulation framework for the prediction of residual stresses in large welded structures
176
Development of a Finite Element Simulator for Crustal Deformation with Large Fault Slipping
177
Development of a finite element solution for the unsteady Navier–Stokes equations using projection method and fractional-θ-scheme Original Research Article
178
Development of a finite element solution module for the analysis of the dynamic behavior and balancing effects of an induction motor system
179
Development of a finite volume contact solver based on the penalty method
180
Development of a finite-element analysis methodology for the propagation of delaminations in composite structures
181
Development of a FINS- based method for the identification of skates species of commercial interest
182
Development of a Fire Safety Checklist for Dormitories
183
Development of a fish emulsion product (Pla Yor)
184
Development of a fish in vitro cell culture model to investigate oxidative stress and its modulation by dietary vitamin E
185
Development of a fish-based index (FBI) of biotic integrity for French lakes using the hindcasting approach
186
Development of a fish-based index to assess the ecological quality of transitional waters: The case of French estuaries
187
Development of a fish-based multimetric index to assess the ecological quality of marine habitats: the Marine Fish Community Index
188
Development of a Fissile Materials Irradiation Capability for Advanced Fuel Testing at the MIT Research Reactor
189
Development of a Five-axis Milling Tool Path Generation Algorithm based on Faceted Models
190
Development of a five-axis postprocessor system with a nutating head
191
Development of a fixed-bed continuous-flow high-throughput reactor for long-chain n-alkane hydroconversion Original Research Article
192
Development of a flashlamp-pumped Cr:LiSAF laser operating at 30 Hz
193
Development of a flat membrane based device for electromembrane extraction: A new approach for exhaustive extraction of basic drugs from human plasma
194
Development of a flexible high-speed EDM technology with geometrical transform optimization
195
Development of a flexible MAPMT photon-counting read-out system
196
Development of a flexible MAPMT photon-counting read-out system
197
Development of a flexible visualization tool
198
Development of a flexural plate-wave (FPW) immunoglobulin-E (IgE) allergy bio-sensing microsystem
199
Development of a flight simulator for the control of plasma discharges
200
Development of a Flooded Forest Anthropization Index (FFAI) applied to Amazonian areas under pressure from different human activities
201
Development of A Flow Amperometric Enzymatic Method for the Determination of Total Glucosinolates in Real Samples
202
Development of a flow cytometric, non-radioactive cytotoxicity assay in Eisenia fetida: An in vitro system designed to analyze immunosuppression of natural killer-like coelomocytes in response to 7, 12 dimethylbenz[a]anthracene (DMBA)
203
Development of a flow injection analysis (FIA) immunosensor for the detection of Escherichia coli
204
Development of a flow injection analysis method for the determination of acrylamide copolymers in brines
205
Development of a Flow Injection Capillary Chemiluminescent ELISA Using an Imprinted Polymer Instead of the Antibody
206
Development of a flow manifold for Fe(III) ion determination with a fluoride ion-selective electrode
207
Development of a flow method for the determination of phosphate in estuarine and freshwaters—Comparison of flow cells in spectrophotometric sequential injection analysis Original Research Article
208
Development of a Flow Model for the Design of a Momentum Type Beet Mass Flow Sensor
209
Development of a flow solver using the adaptive Cartesian mesh algorithm for wind environment assessment
210
Development of a flow solver using the adaptive Cartesian mesh algorithm for wind environment assessment
211
Development of a flow system for the determination of cadmium in fuel alcohol using vermicompost as biosorbent and flame atomic absorption spectrometry
212
Development of a flow-injection liposome immunoanalysis system for fumonisin B1 Original Research Article
213
Development of a flowsheet for iodine–sulfur thermo-chemical cycle based on optimized Bunsen reaction
214
Development of a flow-through enzyme-linked immunosorbent assay and a dipstick assay for the rapid detection of the insecticide carbaryl Original Research Article
215
Development of a flow-through system for cleaning and dissolving foraminiferal tests
216
Development of a fluctuating plume model for odour dispersion around buildings
217
Development of a fluid bed granulation process control strategy based on real-time process and product measurements
218
Development of a fluorescence analysis method for N-acetylneuraminic acid and its oxidized product ADOA
219
Development of a fluorescence lifetime-based sol–gel humidity sensor Original Research Article
220
Development of a fluorescence polarization based assay for histone deacetylase ligand discovery
221
Development of a fluorescence quenching assay to measure the fraction of organic carbon present in self-assembled gels in seawater
222
Development of a fluorescence-based method for evaluation of self-cleaning properties of photocatalytic layers
223
Development of a fluorescence-based microplate method for the determination of volatile fatty acids in anaerobically digested and sewage sludges
224
Development of a fluorescence-based microtiter plate method for the measurement of glutathione in yeast
225
Development of a fluorescent antibody method for the detection of Enterococcus faecium and its potential for coastal aquatic environment monitoring
226
Development of a fluorescent anti-factor Xa assay to monitor unfractionated and low molecular weight heparins
227
Development of a fluorescent chelating ligand for gallium ion having a quinazoline structure with two Schiff base moieties Original Research Article
228
Development of a fluorescent imaging sensor for the detection of human body sweat odor
229
Development of a fluorescent intercalator displacement assay (G4-FID) for establishing quadruplex-DNA affinity and selectivity of putative ligands
230
Development of a fluorescent light technique for evaluating microdamage in bone subjected to fatigue loading
231
Development of a fluorescent optode membrane for sodium ion based on the calix[4]arene and tetraphenylporphine
232
Development of a fluorescent probe for nitric oxide detection based on difluoroboradiaza-s-indacene fluorophore Original Research Article
233
Development of a fluorescent probe for the study of the sponge-derived simplexide immunological properties Original Research Article
234
Development of a fluoroimmunosensor for theophylline using immobilised antibody
235
Development of a fluorosiloxane polymer-coated optical fibre sensor for detection of organic volatile compounds
236
Development of a Fluvial Egg Drift Simulator to evaluate the transport and dispersion of Asian carp eggs in rivers
237
Development of a Fluvial Egg Drift Simulator to evaluate the transport and dispersion of Asian carp eggs in rivers
238
Development of a flux-less soldering method by ultrasonic modulated laser
239
Development of a focused ion beam (FIB) technique to minimize X-ray fluorescence during energy dispersive X-ray spectroscopy (EDS) of FIB specimens in the transmission electron microscope (TEM)
240
Development of a focused ion beam (FIB) technique to minimize X-ray fluorescence during energy dispersive X-ray spectroscopy (EDS) of FIB specimens in the transmission electron microscope (TEM)
241
Development of a focused ultrasonic-assisted extraction of polycyclic aromatic hydrocarbons in marine sediment and mussel samples Original Research Article
242
DEVELOPMENT OF A FODDER BALES CHOPPER
243
DEVELOPMENT OF A FODDER BEET CHOPPING MACHINE
244
Development of a folate-modified curcumin loaded micelle delivery system for cancer targeting
245
Development of a folded waveguide antenna for ICRF heating in the large helical device
246
Development of a food composition database for the estimation of dietary intakes of glucosinolates, the biologically active constituents of cruciferous vegetables
247
Development of a food composition database: methods and goals for the future
248
Development of a food spoilage indicator for monitoring freshness of skinless chicken breast
249
Development of a food-grade organogel with high bioaccessibility and loading of curcuminoids
250
Development of a foot scanner for assessing the mechanical properties of plantar soft tissues under different bodyweight loading in standing
251
Development of a foraminifera-based transfer function in the Basque marshes, N. Spain: Implications for sea-level studies in the Bay of Biscay
252
Development of a force field for some copper(II) Schiff-base complexes
253
Development of A Forecasting Model for Investment in Tehran Stock Exchange Based on Seasonal Coefficient
254
Development of a Forensically Important Fly, Megaselia scalaris (Loew) (Diptera: Phoridae) on Cow’s Liver and Various Agar-based Diets
255
Development of a formulation of Pseudomonas fluorescens PfALR2 for management of rice sheath blight
256
Development of a forward chain approach for calculating self-delay of project activities
257
Development of a four electrode sensor array for impedance spectroscopy in high content screenings of fermentation processes
258
Development of a four-grade and four-segment electrodialysis setup for desalination of polymer-flooding produced water Original Research Article
259
Development of a fourth generation energy recovery device. A ‘CTOʹs notebook’ Original Research Article
260
Development of a four-zone carousel process packed with metal ion-imprinted polymer for continuous separation of copper ions from manganese ions, cobalt ions, and the constituent metal ions of the buffer solution used as eluent
261
Development of a FPW allergy biosensor for human IgE detection by MEMS and cystamine-based SAM technologies
262
Development of a fractionation method for the detection and identification of oak ellagitannins in red wines Original Research Article
263
Development of a fragility model for low-rise steel and reinforced concrete buildings in Iran
264
Development of a framework and tool to asses on-farm energy uses of cotton production
265
Development of a framework based on an ecosystem services approach for deriving specific protection goals for environmental risk assessment of pesticides Original Research Article
266
Development of a framework for a high-resolution, three-dimensional regional air quality simulation and its application to predicting future air quality over Japan
267
Development of a Framework for Assessing Professionalism in Medical Students
268
Development of a framework for customer co-creation in NPD through multi-issue negotiation with issue trade-offs
269
Development of a framework for landscape assessment of Taiwanese wetlands
270
Development of a framework for optimization of reservoir simulation studies
271
DEVELOPMENT OF A FRAMEWORK FOR QUANTIFYING THE REMOVAL OF HUMIC SUBSTANCES BY BIOLOGICAL FILTRATION
272
DEVELOPMENT OF A FRAMEWORK FOR QUANTIFYING THE REMOVAL OF HUMIC SUBSTANCES BY BIOLOGICAL FILTRATION
273
Development of a framework for the growth of technological entrepreneurship in FMCG companies
274
Development of a framework for the risk assessment of Na-Tech accidental events
275
Development of a framework for the risk assessment of Na-Tech accidental events
276
Development of a framework to assess and guide IT investments: An analysis based on a discretionary–mandatory classification
277
Development of a framework to evaluate service-oriented architecture governance using COBIT approach
278
Development of a free anthropomorphic voxel model of human body for wide-band computational electromagnetics dosimetry
279
Development of a freeze-dried radiopharmaceutical kit for dopamine transporters imaging
280
Development of a frequency-detuned interferometer as a prototype experiment for next-generation gravitational-wave detectors
281
Development of a Fresnel lens for cold neutrons based on neutron refractive optics
282
Development of a Fresnel lens for cold neutrons based on neutron refractive optics
283
Development of a Fresnel lens for cold neutrons based on neutron refractive optics
284
Development of a fretting wear test rig and preliminary studies for understanding the fretting wear properties of steels
285
Development of a fretting–fatigue mapping concept: The effect of material properties and surface treatments
286
Development of a friction energy capacity approach to predict the surface coating endurance under complex oscillating sliding conditions
287
Development of a fritless packed column for capillary electrochromatography–mass spectrometry
288
Development of a front end ASIC for Dark Matter directional detection with MIMAC
289
Development of a front end ASIC for Dark Matter directional detection with MIMAC
290
Development of a front-end analog circuit for multi-channel SiPM readout and performance verification for various PET detector designs
291
Development of a front-end analog circuit for multi-channel SiPM readout and performance verification for various PET detector designs
292
Development of a FTIR-ATR based model for typing clinically relevant Acinetobacter baumannii clones belonging to ST98, ST103, ST208 and ST218
293
Development of a full scale ECRH mm-wave launching system mock-up for ITER
294
Development of a full scale remote steerable ECRH mm-wave launching system test set-up for ITER
295
Development of a fully automated on-line solid phase extraction and high-performance liquid chromatography with diode array detection method for the pharmacokinetic evaluation of bavachinin: A study on absolute bioavailability and dose proportionality
296
Development of a fully automated sequential injection solid-phase extraction procedure coupled to liquid chromatography to determine free 2-hydroxy-4-methoxybenzophenone and 2-hydroxy-4-methoxybenzophenone-5-sulphonic acid in human urine Original Research
297
Development of a Fully Integrated Analysis System for Ions Based on Ion-Selective Optodes and Centrifugal Microfluidics
298
Development of a fully Lagrangian MPS-based coupled method for simulation of fluid–structure interaction problems
299
Development of a fully-distributed daily hydrologic feedback model addressing vegetation, land cover, and soil water dynamics (VELAS)
300
Development of a functional status assessment of seniors visiting emergency department
301
Development of a fundamental crack tip strain rate equation and its application to quantitative prediction of stress corrosion cracking of stainless steels in high temperature oxygenated water
302
Development of a fundamental equation of state for the liquid region of a pure fluid from speed of sound measurements. Application to water
303
Development of a fuzzy air quality performance indicator
304
Development of a fuzzy ANP based SWOT analysis for the airline industry in Turkey
305
Development of a Fuzzy Controller with UPFC’s For Damping of Oscillation in Multi-machine Integrated Power System
306
Development of a fuzzy decision support system for commodity acquisition using fuzzy analytic network process
307
Development of a fuzzy decision support system to determine the severity of obstructive pulmonary in chemical injured victims
308
Development of a fuzzy goal programming model for optimization of lead time and cost in an overlapped product development project using a Gaussian Adaptive Particle Swarm Optimization-based approach
309
Development of a fuzzy goal programming model for optimization of lead time and cost in an overlapped product development project using a Gaussian Adaptive Particle Swarm Optimization-based approach
310
Development of a fuzzy inference system based on genetic algorithm for high-impedance fault detection
311
Development of a fuzzy logic traffic system for isolated signalized intersections in the State of Kuwait
312
Development of a Fuzzy Model for Iranian Marine Casualties Management
313
Development of a fuzzy sales forecasting system for vending machines
314
Development of a fuzzy saturation index for sulfate scale prediction
315
Development of a fuzzy-expert system for incident detection and classification
316
Development of a fuzzy-nets-based in-process surface roughness adaptive control system in turning operations
317
Development of a fuzzy-nets-based surface roughness prediction system in turning operations
318
Development of a GA-based method for reliability-based optimization of structures with discrete and continuous design variables using OpenSees and Tcl
319
Development of a gadolinium-loaded liquid scintillator for solar neutrino detection and neutron measurements
320
Development of a gadolinium-loaded liquid scintillator for solar neutrino detection and neutron measurements
321
Development of a galling resistance test method with a uniform stress distribution
322
Development of a Gallium-Doped Germanium Far-Infrared Photoconductor Direct Hybrid Two-Dimensional Array
323
Development of a galvanic monitoring probe to improve service life prediction of reinforced concrete structures with respect to reinforcement corrosion
324
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structure: Part 2. Laboratory electrochemical testing of sensors in concrete
325
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structures: Part 1. Laboratory tests to correlate galvanic current with actual damage
326
Development of a galvanostatic analysis technique as an in-situ diagnostic tool for PEMFC single cells and stacks
327
Development of a gamma compensated boron lined ionisation chamber for reactor safety and control applications
328
Development of a gamma compensated boron lined ionisation chamber for reactor safety and control applications
329
Development of a gamma-camera with a functional collimator
330
Development of a gamma-camera with a functional collimator
331
Development of a Gamma-Ray Box (GARBO)
332
Development of a Gamma-Ray Box (GARBO)
333
Development of a gas chromatographic method for the determination of Chlorpyrifos and its metabolite Chlorpyrifos-oxon in wine matrix
334
Development of a gas chromatographic test for the quantification of the biomarker 3-bromopropionic acid in human urine
335
Development of a gas chromatography compatible Sample Processing System (SPS) for the in-situ analysis of refractory organic matter in martian soil: preliminary results Original Research Article
336
Development of a gas chromatography/mass spectrometry method to quantify several urinary monohydroxy metabolites of polycyclic aromatic hydrocarbons in occupationally exposed subjects
337
Development of a gas chromatography–mass spectrometry method for the determination of household insecticides in indoor air
338
Development of a gas chromatography–mass spectrometry method for the determination of pesticides in gaseous and particulate phases in the atmosphere Original Research Article
339
Development of a gas diffusion probe for the rapid measurement of pCO2 in aquatic samples Original Research Article
340
Development of a gas filter against wire chamber ageing for the MDT chambers in ATLAS
341
Development of a gas filter against wire chamber ageing for the MDT chambers in ATLAS
342
Development of a gas layer to mitigate cavitation damage in liquid mercury spallation targets
343
Development of a gas phase combustion model suitable for low and high turbulence conditions
344
Development of a Gas Sampling Technique for Determining Trace Elements in Submarine Volcanic Exhalations
345
Development of a gas sensor by thick film technology for automotive applications: choice of materials—realization of a prototype
346
Development of a gas turbine fuel nozzle for DME and a design method thereof
347
Development of a gaseous PMT with micro-pattern gas detectors
348
Development of a gaseous PMT with micro-pattern gas detectors
349
Development of a gastight sealing material for ceramic components
350
Development of a Gastroretentive Drug Delivery System based on Superporous Hydrogel
351
Development of a GC-MS Method for Determination of various Polycyclic Aromatic Hydrocarbons in Iranian Traditional and Semi-industrial Taftoon Bread
352
Development of a GC–MS/MS strategy to determine 15 mycotoxins and metabolites in human urine
353
Development of a Gd loaded liquid scintillator for electron anti-neutrino spectroscopy
354
Development of a Gd loaded liquid scintillator for electron anti-neutrino spectroscopy
355
Development of a Geant4 solid for stereo mini-jet cells in a cylindrical drift chamber Original Research Article
356
Development of a gel monolithic column polydimethylsiloxane microfluidic device for rapid electrophoresis separation
357
Development of a gel-to-gel electro-kinetic pinched injection method for an integrated micro-fluidic based DNA analyser Original Research Article
358
Development of a GEM-based High Resolution TPC for the ILC
359
Development of a GEM-based High Resolution TPC for the ILC
360
Development of a general approach to the synthesis of a library of isoflavonoid derivatives
361
Development of a general ecosystem model for a range of scales and ecosystems
362
Development of a general ecosystem model for a range of scales and ecosystems
363
Development of a general intertrip monitoring system for the NGC network
364
Development of a General Potexvirus Detection Method
365
Development of a general river regime index (RRI) for intra-annual flow variation based on the unit river concept and flow variation end-points
366
Development of a general, enantioselective organocatalytic Mukaiyama–Michael reaction with α,β-unsaturated aldehydes
367
Development of a generalized coalescence and breakup closure for the inhomogeneous MUSIG model
368
Development of a generalized material interface for the simulation of finite elasto-plastic deformations
369
Development of a generalized neural network
370
Development of a generalized parameter window for cold spray deposition
371
Development of a generalized parameter window for cold spray deposition Original Research Article
372
Development of a generic assay for the determination of total trihydroxybenzoate derivatives based on gold-luminol chemiluminescence Original Research Article
373
Development of a generic computer-aided process planning support system
374
Development of a generic crop model template in the cropping system model APSIM
375
Development of a generic flow injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach I. Selection and evaluation of the FIA system parameters
376
Development of a generic flow injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach: I. Selection and evaluation of the FIA system parameters Original Research Article
377
Development of a generic flow-injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach: Part II. Selection and evaluation of the chemical reaction parameters Original Research Article
378
Development of a generic microelectrode array biosensing system Original Research Article
379
Development of a generic multipurpose tokamak plasma discharge flight simulator
380
Development of a generic repair joint for certification of bonded composite repairs
381
Development of a generic repair joint for certification of bonded composite repairs
382
Development of a Generic Risk Matrix to Manage Project Risks
383
Development of a Genetic Algorithm for Advertising Time Allocation Problems
384
Development of a genetic algorithm for component placement sequence optimization in printed circuit board assembly
385
Development of a genetic algorithm-based lookup table approach for efficient numerical integration in the method of finite spheres with application to the solution of thin beam and plate problems
386
Development of a genetic selection for catalytic antibodies
387
Development of a genetically tuned fuzzy dynamic model for nonlinear dynamical systems: Application to reaction section of Tennessee Eastman process
388
Development of a Geographic Database Infrastructure at the Atatürk Arboretum Using Free Open Source Software(s)
389
Development of a geography-referenced regional exposure assessment tool for European rivers - great-er contribution to great-er #1
390
DEVELOPMENT OF A GEOMATERIAL FROM DREDGED BAY MUD
391
Development of a geometric flight unloading model for flighted rotary dryers
392
Development of a geometric model for an all-reflective camera system
393
Development of a geomorphological instantaneous unit hydrograph model for scantily gauged watersheds
394
Development of a geospatial model to quantify, describe and map urban growth
395
Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties
396
Development of a Ginkgo biloba fingerprint chromatogram with UV and evaporative light scattering detection and optimization of the evaporative light scattering detector operating conditions
397
Development of a GIS of the Moray Firth (Scotland, UK) and its application in environmental management (site selection for an `artificial reefʹ)
398
Development of a GIS-based decision support system for urban air quality management in the city of Istanbul
399
Development of a glass GEM
400
Development of a glass GEM
401
Development of a glass optical fiber containing ZnO–Al2O3–SiO2 glass-ceramics doped with Co2+ and its optical absorption characteristics
402
Development of a Global Backscatter Model in support to the Sentinel-1 mission design
403
Development of a global computable general equilibrium model coupled with detailed energy end-use technology
404
Development of a global evapotranspiration algorithm based on MODIS and global meteorology data
405
Development of a global MHD simulation model for the S-M-I coupling process in the substorm prediction program at CRL Original Research Article
406
Development of a global stochastic model relating the distribution of individual cell and population physiological states
407
Development of a global voltage security indicator (VSI) and role of SVC on it in longitudinal power supply (LPS) system
408
Development of a globally applicable model for near real-time prediction of seismically induced landslides
409
Development of a GNSS water vapour tomography system using algebraic reconstruction techniques Original Research Article
410
Development of a goal programming model for optimization of truck allocation in open pit mines
411
Development of a gold nanoparticles based chemiluminescence imaging assay and its application
412
Development of a gold nanoparticles based chemiluminescence imaging assay and its application Original Research Article
413
Development of a GPC-based sliding mode controller
414
Development of a GPU-based high-performance radiative transfer model for the Infrared Atmospheric Sounding Interferometer (IASI)
415
Development of a gradient elution preparative high performance liquid chromatography method for the recovery of the antibiotic ertapenem from crystallization process streams
416
Development of a gradient reversed-phase HPLC method for the determination of sodium ferulate in beagle dog plasma
417
Development of a granular normal contact force model based on a non-Newtonian liquid filled dashpot
418
Development of a graphical interface for the Rietveld refinement program DBWS
419
Development of a graphical user interface for a real-time power system simulator
420
Development of a graphical user interface for the conformal finite-difference/time-domain (CFDTD) software package
421
Development of a green chromatographic method for determination of colorants in food samples
422
Development of a green chromatographic method for determination of fat-soluble vitamins in food and pharmaceutical supplement
423
Development of a Green Combat Armour from Rame-Kevlar-Polyester Composite
424
Development of a green extraction procedure with super/subcritical fluids to produce extracts enriched in oleuropein from olive leaves
425
Development of a green fluorescent tagged strain of Aspergillus carbonarius to monitor fungal colonization in grapes
426
Development of a green separation technique for recovery of Wilkinsonʹs catalysts from bulk hydrogenated nitrile butadiene rubber
427
Development of a greenhouse gas accounting GIS-based tool to support local policy making—application to an Italian municipality
428
Development of a Greenhouse Side-ventilation Controller driven by Photovoltaic Energy
429
Development of a ground displacement measurement method for failed slopes at the toes of landslides
430
Development of a ground-based radar for scattering measurements
431
Development of a ground-based space micro-algae photo-bioreactor Original Research Article
432
Development of a ground-water modeling system for military installation restoration
433
Development of a group contribution method for determination of thermal conductivity of ionic liquids
434
Development of a group contribution method for estimating the thermal decomposition temperature of ionic liquids
435
Development of a group contribution method for polymers within the PC-SAFT model
436
Development of a group selective molecularly imprinted polymers based solid phase extraction of malachite green from fish water and fish feed samples Original Research Article
437
Development of a group treatment for enhancing motivation to change PTSD symptoms Original Research Article
438
Development of a group-specific immunoassay for sulfonamides: Application to bee honey analysis
439
Development of a growth inhibition test with the marine and brackish water red alga Ceramium tenuicorne
440
Development of a growth medium suitable for exopolysaccharide production by Lactobacillus delbrueckii ssp. bulgaricus RR
441
Development of a GSO detector assembly for a continuous blood sampling system
442
Development of a GTM-based patent map for identifying patent vacuums
443
Development of a Guidance System for an Agricultural Wheeled Robotic Platform in Row Crop Fields
444
Development of a guinea pig model of chorioamnionitis and fetal brain injury
445
Development of a GVM-based ion beam energy stabilization system at the Bucharest Van de Graaff FN tandem accelerator
446
Development of a GVM-based ion beam energy stabilization system at the Bucharest Van de Graaff FN tandem accelerator
447
Development of a hand–arm mechanical analogue for evaluating chipping hammer vibration emission values
448
Development of a handheld 16 channel pen-type LAPS for electrochemical sensing
449
Development of a hand-held sensor probe for detection of sound components radiated from a specific device using surface intensity measurements
450
Development of a hard nano-structured multi-component ceramic coating by laser cladding
451
Development of a hashing-based data structure for the fast retrieval of 3D terrestrial laser scanned data
452
Development of a Hazard and Operability-based method for identifying safety management vulnerabilities in high risk systems
453
Development of a hazard assessment model for near surface caves in limestone
454
Development of a head scanner for proton CT
455
Development of a head scanner for proton CT
456
Development of a headspace gas chromatographic test for the quantification of 1- and 2-bromopropane in human urine
457
Development of a headspace gas chromatography method to determine residual aliphatic amines in oligonucleotides
458
Development of a headspace solid phase microextraction-gas chromatography method for monitoring volatile compounds in extended time–course experiments of olive oil Original Research Article
459
Development of a headspace solid-phase microextraction gas chromatography–mass spectrometric method for the determination of short-chain fatty acids from intestinal fermentation
460
Development of a headspace solid-phase microextraction method combined with gas chromatography mass spectrometry for the determination of phthalate esters in cow milk Original Research Article
461
Development of a headspace solid-phase microextraction procedure for the determination of free volatile fatty acids in waste waters
462
Development of a headspace solid-phase microextraction–gas chromatography–mass spectrometry method for the identification of odour-causing volatile compounds in packaging materials
463
Development of a headspace trap HRGC/MS method for the assessment of the relevance of certain aroma compounds on the sensorial characteristics of commercial apple juice
464
Development of a headspace-solid phase micro extraction method to monitor changes in volatile profile of rose (Rosa hybrida, cv David Austin) petals during processing
465
Development of a health care provider survey for domestic violence: Psychometric properties Original Research Article
466
Development of a health care systems curriculum
467
Development of a Health Literacy Program for Parents of Children with Cancer: A Mixed-Methods Study Protocol
468
Development of a Health Literacy Promotion Program (HeLPP) to Promote Self-Care Behaviors and Quality of Life among Rural Patients with Type 2 Diabetes: Preliminary Results
469
DEVELOPMENT OF A HEALTH PROMOTION QUESTIONNAIRE INDEX (HPQI) TO MEASURE DOKTOR MUDA (JUNIOR DOCTOR) PROGRAMME IMPACT ON SCHOOLCHILDREN’S ORAL HEALTH KNOWLEDGE, ATTITUDES AND BEHAVIOUR
470
Development of a health sciences library at a historically black college and university (HBCU): laying the foundation for increased minority health and health disparities
471
Development of a Healthcare Coalition for Emergency Preparedness
472
Development of a health-related lifestyle self-management intervention for patients with coronary heart disease
473
Development of a Heart Failure Palliative Care Educational Program for Nurses: A Multi Method Approach
474
Development of a heat exchanger for the cold side of a thermoelectric module
475
Development of a heat transfer correlation for a Scraped-Surface Heat Exchanger
476
Development of a heat transfer dimensionless correlation for spheres immersed in a wide range of Prandtl number fluids
477
Development of a Heat Transfer Model for Plant Tissue Culture Vessels
478
Development of a heat-sensor for the measurement of reaction enthalpy based on laser deflection
479
Development of a heavy demining machine
480
Development of a heavy metal sorption system through the PS functionalization of coconut (Cocos nucifera) fibers
481
Development of a heavy metals enzymatic-based assay using papain Original Research Article
482
Development of a helicopter-mounted eye-safe laser radar system for distance measurement between power transmission lines and nearby trees
483
Development of a helium atmosphere soil incubation technique for direct measurement of nitrous oxide and dinitrogen fluxes during denitrification
484
Development of a helium atmosphere soil incubation technique for direct measurement of nitrous oxide and dinitrogen fluxes during denitrification
485
Development of a helium-cooled divertor concept: design-related requirements on materials and fabrication technology
486
Development of a helium-cooled divertor: Material choice and technological studies
487
Development of a Hemilabile P-P=O Ligand Based on the Concept of ­Conformational Control
488
Development of a herbicide application map using artificial neural networks and fuzzy logic
489
Development of a herbicide biosensor using a peptide receptor screened from a combinatorial library
490
Development of a heterobimetallic Ru(II)–Cu(II) complex for highly selective and sensitive luminescence sensing of sulfide anions Original Research Article
491
Development of a heterogeneous catalytic cracking reactor utilizing online mass spectrometry analysis
492
Development of a heterogeneous chemiluminescent flow immunoassay for DDT and related compounds Original Research Article
493
Development of a hexavalent chromium ISFET sensor with a polymeric membrane including tributylphosphate
494
Development of a hierarchical Bayesian model to estimate the growth parameters of Listeria monocytogenes in minimally processed fresh leafy salads
495
Development of a hierarchical system for the teletransmission of environmental and energy data
496
Development of a Higee bioreactor (HBR) for production of polyhydroxyalkanoate: Hydrodynamics, gas–liquid mass transfer and fermentation studies
497
Development of a high current electron gun to generate single-bunch beams with the L-band linear accelerator in Osaka University
498
Development of a high current electron gun to generate single-bunch beams with the L-band linear accelerator in Osaka University
499
Development of a high current supersonic ion source for electromagnetic accelerators
500
Development of a high cycle fatigue testing system and its application to thin aluminum film
501
Development of a high density carbonaceous adsorbent from compressed wood Original Research Article
502
Development of a high efficiency and high resolution Compton probe for prostate imaging
503
Development of a high efficiency and high resolution Compton probe for prostate imaging
504
Development of a high efficiency annular detector system for RIB experiments at NSC
505
Development of a high efficiency annular detector system for RIB experiments at NSC
506
Development of a high efficiency radiation converter using a spiral heat exchanger
507
Development of a high efficient gas to hydrate (GTH) conversion process using SDS kinetic promoter for maximizing the CO2 recovery with minimum energy consumption
508
Development of a high energy pulsed plasma simulator for the study of liquid lithium trenches
509
Development of a high gradient permanent magnetic separator (HGPMS)
510
Development of a high lateral resolution TOF-SIMS apparatus for single particle analysis
511
Development of a high modulus paste fill using fine gold mill tailings
512
Development of a high performance anion exchange chromatography analysis for mapping of oligosaccharides
513
Development of a high performance Cu-based ternary oxide catalyst for oxidative steam reforming of methanol using an artificial neural network Original Research Article
514
Development of a high performance electrochemical cofactor regeneration module and its application to the continuous reduction of FAD
515
Development of a High Performance End Mill Based on the Analysis of Chip Flow Generated by Curved Rake Face
516
Development of a high performance liquid chromatography method and a liquid chromatography–tandem mass spectrometry method with pressurized liquid extraction for simultaneous quantification and confirmation of cyromazine, melamine and its metabolites in f
517
Development of a high performance liquid chromatography method and a liquid chromatography–tandem mass spectrometry method with the pressurized liquid extraction for the quantification and confirmation of sulfonamides in the foods of animal origin
518
Development of a high performance liquid chromatography method for quantification of isomers β-caryophyllene and α-humulene in copaiba oleoresin using the Box-Behnken design
519
Development of a high performance liquid chromatography/mass spectroscopy method for the determination of strychnine concentrations in insects used to assess potential risks to insectivores
520
Development of a high performance size exclusion chromatography method to determine the stability of Human Serum Albumin in a lyophilized formulation of Interferon alfa-2b
521
Development of a high power diplexer with short-slotted metal half mirrors for electron cyclotron current drive
522
Development of a high precision flexure-based microgripper
523
Development of a high repetition rate Nd:YAG slab laser and soft X-ray generation by cryogenic target
524
Development of a high resolution runoff routing model, calibration and application to assess runoff from the LMD TGCM
525
Development of a high resolution UV spectrophotometer for at-line monitoring of bioprocesses
526
Development of a high sensitive automatic setup for screening of microcystins in surface waters by employing a LED-based photometric detector
527
Development of a high spatial resolution SQUID magnetometer for biomagnetic measurement
528
Development of a high strength Al–Mg2Si–Mg–Zn based alloy for high pressure die casting
529
Development of a high strength high toughness ausferritic steel
530
Development of a high temperature Cf/XSi2–SiC (X = Mo, Ti) composite via reactive melt infiltration
531
Development of a high throughput 96-well plate sample preparation method for the determination of trileptal (oxcarbazepine) and its metabolites in human plasma
532
Development of a high throughput cross-flow filtration system for detailed investigation of fouling processes
533
Development of a high throughput screening tool for biotransformations utilising a thermophilic l-aminoacylase enzyme
534
Development of a high throughput, quantitative assay of the effects of fungal-derived griseofulvin and cordycepin, and butyrate on the cytoskeleton
535
Development of a high torque–high power spindle system equipped with a synchronous motor for high performance cutting
536
Development of a high yield and low cycle time biomass char production system
537
Development of a high-density position decoder circuit for GAPD-based PET with a large number of readout channels
538
Development of a high-density position decoder circuit for GAPD-based PET with a large number of readout channels
539
Development of a high-efficiency high-resolution imaging detector for 30–80 keV X-rays
540
Development of a high-efficiency high-resolution imaging detector for 30–80 keV X-rays
541
Development of a high-efficiency hydrogen generator for fuel cells for distributed power generation
542
Development of a high-efficiency modeling technique for weld-bonded steel joints in vehicle structures, Part II: Dynamic experiments and simulations
543
Development of a high-efficiency pulsed slow positron beam for measurements with orthopositronium in vacuum
544
Development of a high-efficiency pulsed slow positron beam for measurements with orthopositronium in vacuum
545
Development of a higher order finite element on a Winkler foundation
546
Development of a higher-order accurate kinetic wave/particle flux-splitting algorithm for the Euler equations Original Research Article
547
Development of a highly compact steam generator
548
Development of a highly efficient low-emission diesel engine-powered co-generation system and its optimization using Taguchi method
549
Development of a highly efficient system for assessing recombinant gene expression in plant cell suspensions via Agrobacterium tumefaciens transformation
550
Development of a Highly Flexible Incremental Roll Forming Process for the Manufacture of a Doubly Curved Sheet Metal
551
Development of a highly hydrophilic nanofiltration membrane for desalination and water treatment Original Research Article
552
Development of a highly intense state-selected CH radical beam source for the study on the collision energy dependent reaction dynamics
553
Development of a highly reliable helium refrigeration system––R&D of a highly reliable helium refrigeration system (conventional type) Original Research Article
554
Development of a highly reliable helium refrigeration system––R&D of a highly reliable helium refrigeration system (oil-free type) Original Research Article
555
Development of a highly robust solid phase microextraction fiber based on crosslinked methyl methacrylate–polyhedral oligomeric silsesquioxane hybrid polymeric coating Original Research Article
556
Development of a highly selective EP2-receptor agonist. Part 1: identification of 16-hydroxy-17,17-trimethylene PGE2 derivatives Original Research Article
557
Development of a highly selective EP2-receptor agonist. Part 2: identification of 16-Hydroxy-17,17-trimethylene 9β-chloro PGF derivatives Original Research Article
558
Development of a highly selective voltammetric sensor for nanomolar detection of mercury ions using glassy carbon electrode modified with a novel ion imprinted polymeric nanobeads and multi-wall carbon nanotubes
559
Development of a highly sensitive analytical technique for surfactants by time-of-flight secondary ion mass spectrometry
560
Development of a highly sensitive and robust Cor a 9 specific enzyme-linked immunosorbent assay for the detection of hazelnut traces Original Research Article
561
Development of a highly sensitive and selective hyphenated technique (molecularly imprinted micro-solid phase extraction fiber–molecularly imprinted polymer fiber sensor) for ultratrace analysis of folic acid Original Research Article
562
Development of a highly sensitive and selective mercury optical sensor based on immobilization of bis(thiophenal)-4,4′-methylenedianiline on a PVC membrane
563
Development of a highly sensitive and selective optical chemical sensor for batch and flow-through determination of mercury ion
564
Development of a highly sensitive and selective optical sensor for determination of ultra-trace amount of silver ions
565
Development of a highly sensitive and specific enzyme-linked immunosorbent assay (ELISA) for the detection of phenylethanolamine A in tissue and feed samples and confirmed by liquid chromatography tandem mass spectrometry (LC–MS/MS)
566
Development of a highly sensitive and specific monoclonal antibody-based enzyme-linked immunosorbent assay (ELISA) for detection of Sudan I in food samples
567
Development of a highly sensitive and specific monoclonal antibody-based enzyme-linked immunosorbent assay for determination of doxycycline in chicken muscle, liver and egg
568
Development of a highly sensitive enzyme immunoassay for human calcitonin using solid phase coupled with multiple antibodies
569
Development of a highly sensitive enzyme-linked immunosorbent assay for atrazine Performance evaluation by flow injection immunoassay
570
Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone
571
Development of a highly sensitive inhibition immunoassay for microcystin-LR
572
Development of a highly sensitive inhibition immunoassay for microcystin-LR Original Research Article
573
Development of a highly sensitive method for the quantification of estrone and estradiol in serum by liquid chromatography tandem mass spectrometry without derivatization
574
Development of a highly sensitive MIP based-QCM nanosensor for selective determination of cholic acid level in body fluids
575
Development of a highly sensitive porous Si-based hydrogen sensor using Pd nano-structures
576
Development of a highly sensitive, field operable biosensor for serological studies of Ebola virus in central Africa
577
Development of a highly sensitive, second antibody format chemiluminescence enzyme immunoassay for the determination of 17β-estradiol in wastewater Original Research Article
578
Development of a highly water-soluble peptide-based human neutrophil elastase inhibitor; AE-3763 for treatment of acute organ injury Original Research Article
579
Development of a highly α-regioselective indium-mediated allylation reaction in water
580
Development of a highly α-selective galactopyranosyl donor based on a rational design
581
Development of a high-performance angle-resolving electron energy analyzer
582
Development of a high-performance gantry system for a new generation of optical slope measuring profilers
583
Development of a high-performance gantry system for a new generation of optical slope measuring profilers
584
Development of a high-performance immunolatex based on “soft landing” antibody immobilization mechanism
585
Development of a high-performance laser-guided deep-hole boring tool:: Optimal determination of reference origin for precise guiding
586
Development of a high-performance lead–acid battery for new-generation vehicles
587
Development of a high-performance liquid chromatographic method for bioanalytical applications with sulpiride
588
Development of a high-performance liquid chromatographic method for bioequivalence study of flavoxate tablets
589
Development of a high-performance liquid chromatographic method for the determination of 11-keto-β-boswellic acid in human plasma
590
Development of a high-performance liquid chromatographic method for the determination of a new potent radioiodinated melanoma imaging and therapeutic agent
591
Development of a high-performance liquid chromatographic method for the quantification of chlorpyrifos, pyridostigmine bromide, N,N-diethyl-m-toluamide and their metabolites in rat plasma and urine
592
Development of a high-performance liquid chromatographic method to determine the concentration of karenitecin, a novel highly lipophilic camptothecin derivative, in human plasma and urine
593
Development of a high-performance liquid chromatographic method with electrochemical detection for the determination of hyperforin
594
Development of a high-performance liquid chromatographic–mass spectrometric assay for the specific and sensitive quantification of Ro 64-0802, an anti-influenza drug, and its pro-drug, oseltamivir, in human and animal plasma and urine
595
Development of a high-performance liquid chromatographic–mass spectrometric method for the determination of cellular levels of the tyrosine kinase inhibitors lapatinib and dasatinib
596
Development of a high-performance liquid chromatographic–tandem mass spectrometric method for the determination of pharmacokinetics of Co 102862 in mouse, rat, monkey and dog plasma
597
Development of a high-performance liquid chromatography carbon column based method for the fractionation of dioxin-like polychlorinated biphenyls
598
Development of a high-performance liquid chromatography method for the determination of caspofungin with amperometric detection and its application to in vitro microdialysis experiments
599
Development of a high-performance liquid chromatography method for the simultaneous quantification of four organoarsenic compounds in the feeds of swine and chicken
600
Development of a high-performance liquid chromatography method for the simultaneous quantification of quinoxaline-2-carboxylic acid and methyl-3-quinoxaline-2-carboxylic acid in animal tissues
601
Development of a high-performance liquid chromatography method for warfarin detection in human plasma
602
Development of a high-performance liquid chromatography method to monitor the residues of benzimidazoles in bovine milk
603
Development of a high-performance liquid chromatography–electrospray ionization-quadrupole-time-of-flight-mass spectrometry methodology for the determination of three highly antihypertensive peptides in maize crops
604
Development of a high-performance liquid chromatography-fluorescence detection method for analyzing nonylphenol/dinonylphenol-polyethoxylate-based phosphate esters
605
Development of a high-performance liquid chromatography–tandem mass spectrometry method for the determination of flurogestone acetate in ovine plasma
606
Development of a High-Performance Magnetic Gear
607
Development of a high-performance microstrip gas chamber with a capability of track discrimination for neutron detection
608
Development of a high-performance microstrip gas chamber with a capability of track discrimination for neutron detection
609
Development of a high-performance PEFC module operated by reformed gas
610
Development of a High-Porosity Fixed-Abrasive Pad Utilizing Catalytic Effects of TiO2 on Polyurethane Matrix
611
Development of a high-power lithium-ion battery
612
Development of a high-power solid-state switch using static induction thyristors for a klystron modulator
613
Development of a high-power solid-state switch using static induction thyristors for a klystron modulator
614
Development of a high-power THz radiation source for plasma diagnostics
615
Development of a high-precision image-processing automatic measurement system for MRI visceral fat images acquired using a binomial RF-excitation pulse
616
Development of a high-precision, wear-resistant micro-holes structure
617
Development of a high-range gamma ion chamber for space critical applications
618
Development of a high-range gamma ion chamber for space critical applications
619
Development of a high-rate high-resolution detector for EXAFS experiments
620
Development of a high-resolution (1 km × 1 km, 1 h) emission model for Spain: The High-Elective Resolution Modelling Emission System (HERMES)
621
Development of a high-resolution alpha camera
622
Development of a high-resolution alpha camera
623
Development of a high-resolution emission inventory for Spain using the SMOKE modelling system: A case study for the years 2000 and 2010
624
Development of a high-resolution hyperbolic model on quadratic elements Original Research Article
625
Development of a high-resolution measurement technique of the interval between bunches in a linac with coherent transition radiation
626
Development of a high-resolution measurement technique of the interval between bunches in a linac with coherent transition radiation
627
Development of a high-resolution melt-based assay to rapidly detect the azole-resistant Candida auris isolates
628
Development of a High-resolution Melting Analysis Method Based on SYBR Green-I for rs7216389 Locus Genotyping in Asthmatic Child Patients
629
Development of a High-Resolution Melting Method for Screening R188H Polymorphism in XRCC2 Gene
630
Development of a High-Resolution Nested Air Pollution Model: The Numerical Approach
631
Development of a high-sensitivity chromatographic separation system for pyridylaminated aldopentoses and aldohexoses
632
Development of a high-sensitivity nested PCR assay for the detection of Clostridium piliforme in clinical samples
633
Development of a high-sensitivity quantitative analytical method for determining polycarbamate by gas chromatography-mass spectrometry incorporating temperature-programmable inlet on-column injection
634
Development of a high-speed camera system for neutron imaging at a pulsed neutron source
635
Development of a high-speed camera system for neutron imaging at a pulsed neutron source
636
Development of a high-speed CNC cutting machine using linear motors
637
Development of a high-speed cryogenic tribometer: Design concept and experimental results
638
Development of a High-Speed Manufacturing Method for Electroplated Diamond Wire Tools
639
Development of a high-speed single-photon pixellated detector for visible wavelengths
640
Development of a high-speed single-photon pixellated detector for visible wavelengths
641
Development of a high-speed switching system for distribution networks
642
Development of a high-temperature air-blown gasification system
643
Development of a high-throughput enzyme-linked immunosorbent assay for the routine detection of the carcinogen acrylamide in food, via rapid derivatisation pre-analysis Original Research Article
644
Development of a high-throughput LC/APCI-MS method for the determination of thirteen phytoestrogens including gut microbial metabolites in human urine and serum
645
Development of a high-throughput method for the determination of ethosuximide in human plasma by liquid chromatography mass spectrometry
646
Development of a high-throughput method for the determination of organochlorinated compounds, nitromusks and pyrethroid insecticides in indoor dust
647
Development of a high-throughput screening assay for stearoyl-CoA desaturase using rat liver microsomes, deuterium labeled stearoyl-CoA and mass spectrometry Original Research Article
648
Development of a high-throughput screening method for racemase activity and its application to the identification of alanine racemase variants with activity towards l-arginine
649
Development of a high-throughput thermoelectric screening tool for combinatorial thin film libraries
650
Development of a high-throughput ultra performance liquid chromatography–mass spectrometry assay to profile 18 eicosanoids as exploratory biomarkers for atherosclerotic diseases
651
Development of a highway noise prediction model using an Leq20 s measure of basic vehicular noise
652
Development of a highway traffic noise prediction model that considers various road surface types
653
Development of a High-Yield Process for Scalable Extraction of Beta-Glucan from Baker’s Yeast
654
Development of a hip wear simulation rig including micro-separation
655
Development of a hollow cylinder test for the elastic modulus distribution and the ultimate strength of bamboo
656
Development of a hollow fiber membrane module for using implantable artificial lung
657
Development of a hollow fibre liquid phase microextraction method to monitor the sonochemical degradation of explosives in water
658
Development of a hollow fibre liquid phase microextraction method to monitor the sonochemical degradation of explosives in water Original Research Article
659
Development of a holographic sensor for the detection of calcium dipicolinate—A sensitive biomarker for bacterial spores
660
Development of a home enteral nutrition (HEN) patient database for Sydney West Area Health Service
661
Development of a home-made extraction device for vortex-assisted surfactant-enhanced-emulsification liquid–liquid microextraction with lighter than water organic solvents
662
DEVELOPMENT OF A HOMOGENEOUS PHOSPHORESCENT IMMUNOASSAY FOR THE DETECTION OF POLYCHLORINATED DIBENZOp-DIOXINS
663
Development of a homogeneous pulse shape discriminating flow-cell radiation detection system
664
Development of a homogeneous pulse shape discriminating flow-cell radiation detection system
665
Development of a Hookah Smoking Obscenity Measurement Scale for Adolescents
666
Development of a horizontally and vertically focused neutron monochromator using stacked elastically bent Si single crystals
667
Development of a horizontally and vertically focused neutron monochromator using stacked elastically bent Si single crystals
668
Development of a hot tear indicator for steel castings
669
Development of a hot water reconstitutable appetizer soup mix from Coleus aromaticus using response surface methodology
670
Development of a housing performance evaluation model for multi-family residential buildings in Korea
671
Development of a HTS magnet and application to a beam scanner
672
Development of a HTS magnet and application to a beam scanner
673
Development of a Human Light Chain Variable Domain (VL) Intracellular Antibody Specific for the Amino Terminus of Huntingtin via Yeast Surface Display
674
Development of a Humidification–Dehumidification System in a Quonset Greenhouse for Sustainable Crop Production in Arid Regions
675
Development of a hybrid battery system for an implantable biomedical device, especially a defibrillator/cardioverter (ICD)
676
Development of a hybrid coating process as an advanced surface modification for cutting tools and moulds
677
Development of a hybrid coating process for deposition of diamond-like carbon films on microdrills
678
Development of a hybrid compressed gas engine/PEFC power system using the dissociation expansion characteristics of gas hydrate
679
Development of a hybrid computer model for simulating the complicated virtual sound field in enclosures
680
Development of a hybrid fermentation–enzymatic bioprocess for the production of ethyl lactate from dairy waste
681
Development of a hybrid finite element model for individual simulation of intertrochanteric osteotomies
682
Development of a hybrid helical microwiggler with four poles per period
683
Development of a hybrid image processing algorithm for automatic evaluation of intramuscular fat content in beef M. longissimus dorsi
684
Development of a hybrid margin angle controller for HVDC continuous operation
685
Development of a hybrid meta-heuristic algorithm for combinatorial optimisation and its application for optimal design of laminated composite cylindrical skirt
686
Development of a hybrid method for estimating land surface shortwave net radiation from MODIS data
687
Development of a hybrid methodology for dimensionality reduction in Mahalanobis–Taguchi system using Mahalanobis distance and binary particle swarm optimization
688
Development of a hybrid MSGC detector for thermal neutron imaging with a MHz data acquisition and histogramming system
689
Development of a hybrid MSGC detector for thermal neutron imaging with a MHz data acquisition and histogramming system
690
Development of a hybrid neural network system for prediction of process parameters in injection moulding
691
Development of a hybrid photo-diode and its front-end electronics for the BTEV experiment
692
Development of a hybrid photo-diode and its front-end electronics for the BTEV experiment
693
Development of a hybrid phototube with ZnO:Ga luminescent screen and GaN photocathode
694
Development of a hybrid phototube with ZnO:Ga luminescent screen and GaN photocathode
695
Development of a hybrid PIG-ECR ion source
696
Development of a hybrid pneumatic-power vehicle
697
Development of a hybrid refrigerator combining thermoelectric and vapor compression technologies
698
Development of a hybrid sectional quadrature-based moment method for solving population balance equations
699
Development of a hybrid vibration experiment system for determining wind-induced responses of buildings with tuned dampers
700
Development of a hybrid pneumatic-power vehicle
701
Development of a Hybridized Model for Predicting the Life Span of Power Transformers
702
Development of a Hydraulic Circulation Sub as a Tool to Prevent Mud Losses During Well Drilling
703
Development of a hydraulic control mechanism for cyclic pitch marine current turbines
704
Development of a hydrocarbon completion system for wells with low bottomhole temperatures for conditions of oil and gas fields in Eastern Siberia
705
Development of a hydrodynamic model of the Bay of Biscay. Validation of hydrology
706
Development of a hydrogen absorbing layer in the outer shell of high pressure hydrogen tanks
707
Development of a hydrogen catalytic heater for heating metal hydride hydrogen storage systems
708
Development of a hydrogen fuelling infrastructure in the Northeast U.S.A.
709
Development of a hydrogen permeation sensor for future tritium applications
710
Development of a Hydrogen Selective Ceramic Membrane and Its Application for the Conversion of Greenhouse Gases
711
Development of a hydrometallurgical route for the recovery of zinc and manganese from spent alkaline batteries
712
Development of a hydrophilic interaction chromatography–mass spectrometry assay for spectinomycin and lincomycin in liquid hog manure supernatant and run-off from cropland
713
Development of a hydrophilic interaction liquid chromatography–mass spectrometry method for detection and quantification of urea thermal decomposition by-products in emission from diesel engine employing selective catalytic reduction technology
714
Development of a hydrophilic PES ultrafiltration membrane containing SiO2@N-Halamine nanoparticles with both organic antifouling and antibacterial properties Original Research Article
715
Development of a hydrophilic polymer membrane containing silver nanoparticles with both organic antifouling and antibacterial properties
716
Development of a hydrothermal time seed germination model which uses the Weibull distribution to describe base water potential
717
Development of a hydrothermal time seed germination model which uses the Weibull distribution to describe base water potential
718
Development of a hydroxyl radical ratiometric nanoprobe
719
Development of a hyena immunology toolbox
720
Development of a hyena immunology toolbox
721
Development of a hyperparasitoid wasp in different stages of its primary parasitoid and secondary herbivore hosts
722
Development of a Hyphenated Method Called DLLME/TLM for Trace Analysis of Cd
723
Development of a hyphenated procedure of heat-reflux and ultrasound-assisted extraction followed by RP-HPLC separation for the determination of three flavonoids content in Scutellaria barbata D. Don
724
Development of a IRSN code for dust mobilisation problems in ITER
725
Development of a jar testing protocol for chemical phosphorus removal in activated sludge using statistical experimental design
726
Development of a Joint Economic Lot Size Model for Vendor-Buyer with Normal Demand and Empirical Delivery Time with Service level and Incremental Discount
727
Development of a joint economic lot size model with stochastic demand within non-equal shipments
728
Development of a J-shaped pneumatic valve to control the solid particle circulation rate in a circulating fluidized bed
729
Development of a KBS for personal financial planning guided by pragmatic KADS
730
Development of a kinematically focused neutron source with the p(7Li,n)7Be inverse reaction
731
Development of a kinematically focused neutron source with the p(7Li,n)7Be inverse reaction
732
Development of a kinetic basis for bioavailability of sorbed naphthalene in soil slurries
733
Development of a kinetic model for bainitic isothermal transformation in transformation-induced plasticity steels Original Research Article
734
Development of a kinetic model for Fischer–Tropsch synthesis over Co/Ni/Al2O3 catalyst
735
Development of a knowledge base as a tool for contextualized learning
736
Development of a knowledge base for ESOL teacher education
737
Development of a knowledge based hybrid neural network (KBHNN) for studying the effect of diafiltration during ultrafiltration of whey Original Research Article
738
Development of a knowledge based multimedia DBMS schema architecture
739
Development of a knowledge management initiative and system: A case study
740
Development of a knowledge scale about breast cancer and heredity (BCHK)
741
Development of a knowledge scale about breast cancer and heredity (BCHK)
742
Development of a knowledge-based expert system for solving metal cutting problems
743
Development of a knowledge-based self-assessment system for measuring organisational performance
744
Development of a Korean HyperthyroidismSpecific Health Status Scale
745
Development of a k–ε model for the determination of air exchange rates for street canyons
746
Development of a label-free electrochemical immunosensor based on carbon nanotube for rapid determination of clenbuterol
747
Development of a laboratory AC-DC simulator for on-line control study
748
Development of a Laboratory Clarifier Test to Predict Full Scale Primary Clarifier Performance
749
Development of a laboratory exposure system using marine fish to carry out realistic effect studies with produced water discharged from offshore oil production
750
Development of a laboratory method to predict plant flash flotation performance
751
Development of a laboratory model of activated charcoal–nitrogen adsorption cryocooler Original Research Article
752
Development of a laboratory model screw press for peanut oil expression Original Research Article
753
Development of a laboratory spectral backscattering instrument: design and simulation
754
Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam
755
Development of a laboratory test to characterise the behaviour of free gold for use in a combined flash flotation and gravity concentrator model
756
Development of a lab-scale, high-resolution, tube-generated X-ray computed-tomography system for three-dimensional (3D) materials characterization
757
Development of a laccase/syringaldazine system for NAD(P)H oxidation
758
Development of a laccase-based flow injection electrochemical biosensor for the determination of phenolic compounds and its application for monitoring remediation of Kraft E1 paper mill effluent Original Research Article
759
Development of a Lake Eutrophication model
760
Development of a Lake Eutrophication model
761
Development of a land use extraction expert system through morphological and spatial arrangement analysis
762
Development of a land use extraction expert system through morphological and spatial arrangement analysis
763
Development of a Laplacian-based mesh generator for ALE calculations in rotary volumetric pumps and compressors Original Research Article
764
Development of a large area photodetector with a fast phosphor anode
765
Development of a large area photodetector with a fast phosphor anode
766
Development of a large area, curved two-dimensional detector for single-crystal neutron diffraction studies
767
Development of a large area, curved two-dimensional detector for single-crystal neutron diffraction studies
768
Development of a large format charge-coupled device (CCD) for applications in X-ray astronomy
769
Development of a large format charge-coupled device (CCD) for applications in X-ray astronomy
770
Development of a large high-performance 2-D array of GaAs-AlGaAs multiple quantum-well modulators
771
Development of a large sonochemical reactor at a high frequency
772
Development of a large titanium bone chamber to study in vivo bone ingrowth
773
Development of a large volume zero boil-off liquid xenon storage system for muon rare decay experiment (MEG) Original Research Article
774
Development of a large-area aerogel Čherenkov counter onboard BESS
775
Development of a large-area aerogel Čherenkov counter onboard BESS
776
Development of a large-area monolithic 4×4 MPPC array for a future PET scanner employing pixelized Ce:LYSO and Pr:LuAG crystals
777
Development of a large-area monolithic 4×4 MPPC array for a future PET scanner employing pixelized Ce:LYSO and Pr:LuAG crystals
778
Development of a large-scale TEG for evaluation and analysis of yield and variation
779
Development of a large-sized, long-life, valve-regulated lead–acid battery
780
Development of a large-volume, membrane-based injection system for gradient elution micro-liquid chromatography
781
Development of a Laser Ablation System Kit (LASK) for Tokamak in vessel tritium and dust inventory control
782
Development of a laser displacement probe to measure particle impact velocities in vibrationally fluidized granular flows
783
Development of a Laser IInterferometric Dilatometer for Measurements of Thermal Expansion of Solids in the Temperature Range 300 to 1300 K
784
Development of a laser in situ airborne hygrometer (LISAH)
785
Development of a laser Raman spectrometer for deep-ocean science
786
Development of a laser shock adhesion test for the assessment of weak adhesive bonded CFRP structures
787
Development of a laser wire beam profile monitor (2)
788
Development of a laser wire beam profile monitor (2)
789
Development of a laser-induced fluorescence imaging system for root activity and rhizosphere visualisation
790
Development of a laser-induced plasma probe to measure gas phase plasma signals at high pressures and temperatures
791
Development of a laser-induced plasma probe to measure gas phase plasma signals at high pressures and temperatures
792
Development of a laser-produced plasma target for beam–plasma interaction researches
793
Development of a laser-produced plasma target for beam–plasma interaction researches
794
Development of a Laser-Scattering-Based Probe for On-Line Measurement of Surface Roughness
795
Development of a Lateral Flow Immunoassay Using Recombinant Dense Granular Antigen (GRA) 7 to Detect AntiToxoplasma gondii IgG Antibodies
796
Development of a Latex Agglutination Test as a Simple and Rapid Method for Diagnosis of Trichomonas vaginalis Infection
797
Development of a LC/MS/MS method for the analysis of cannabinoids in human EDTA-plasma and urine after small doses of Cannabis sativa extracts
798
Development of a LC/MS/MS method to analyze butyrylcholinesterase inhibition resulting from multiple pesticide exposure
799
Development of a LC-MS/MS Method for the Determination of Narcotic Drugs and Psychotropic Substances in Human Hair
800
Development of a LC–MS/MS method to monitor palmitoyl peptides content in anti-wrinkle cosmetics Original Research Article
801
Development of a leaching protocol for concrete
802
Development of a lead-acid battery for a hybrid electric vehicle
803
Development of a Leaf-Level Canopy Assimilation Model for CERES-Maize
804
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method
805
Development of a lens-coupled CMOS detector for an X-ray inspection system
806
Development of a lens-coupled CMOS detector for an X-ray inspection system
807
Development of a Lesion-Mimic Phenotype in a Transgenic Wheat Line Overexpressing Genes for Pathogenesis-Related (PR) Proteins Is Dependent on Salicylic Acid Concentration
808
Development of a Level 1 Track Trigger for the CMS experiment at the high-luminosity LHC
809
Development of a Level 1 Track Trigger for the CMS experiment at the high-luminosity LHC
810
Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy – Application to a nickel-base superalloy
811
Development of a Life Cycle Assessment Program for building (SUSB-LCA) in South Korea
812
Development of a life cycle assessment tool for construction and maintenance of asphalt pavements
813
Development of a life cycle cost estimate system for structures of light rail transit infrastructure
814
Development of a light readout based on silicon photomultipliers for a wavelength-shifting fibre gamma camera
815
Development of a light readout based on silicon photomultipliers for a wavelength-shifting fibre gamma camera
816
Development of a light scatter sensor technology for on-line monitoring of milk coagulation and whey separation Original Research Article
817
Development of a lightweight and adaptable multiple-axis hand prosthesis
818
Development of a lightweight deployable/stowable radiator for interplanetary exploration
819
Development of a lightweight epoxy asphalt mixture for bridge decks
820
Development of a lightweight fuel cell vehicle
821
Development of a lightweight low-current 10 K 4 T magnet for space-flight ADRs Original Research Article
822
Development of a lightweight space debris shield using high strength fibers
823
Development of a Likert Type Attitude Scale in Health Sciences
824
Development of a linear brushless DC motor drive with robust position control
825
Development of a Linear Corona Torch Discharge
826
Development of a linear dominance hierarchy in nestling birds
827
Development of a linear electrostrictive servo motor
828
Development of a linear motion antenna for the JT-60SA ECRF system
829
Development of a linear predictive model for carbon dioxide sequestration in deep saline carbonate aquifers
830
Development of a line-narrowed and frequency-stabilized TDL system for sub-Doppler molecular spectroscopy
831
Development of a lion-specific interferon-gamma assay
832
Development of a lion-specific interferon-gamma assay
833
Development of a lipid profiling system using reverse-phase liquid chromatography coupled to high-resolution mass spectrometry with rapid polarity switching and an automated lipid identification software
834
Development of a lipid-rich, soft plaque in rabbits, monitored by histology and intravascular ultrasound
835
Development of a liquid 3He target for experimental studies of antikaon–nucleon interaction at J-PARC
836
Development of a liquid 3He target for experimental studies of antikaon–nucleon interaction at J-PARC
837
Development of a liquid chromatographic method for bioanalytical applications with sildenafil
838
Development of a liquid chromatographic–tandem mass spectrometric method with precolumn derivatization for the determination of dencichine in rat plasma Original Research Article
839
Development of a liquid chromatography method for the determination of linezolid and its application to in vitro and human microdialysis samples
840
Development of a liquid chromatography tandem mass spectrometry method for simultaneous determination of eight adulterants in slimming functional foods
841
Development of a liquid chromatography tandem mass spectrometry method for trace analysis of trisiloxane surfactants in the aqueous environment: An alternative strategy for quantification of ethoxylated surfactants
842
Development of a liquid chromatography/negative-ion electrospray tandem mass spectrometry assay for the determination of cilnidipine in human plasma and its application to a bioequivalence study
843
Development of a liquid chromatography/tandem mass spectrometry assay for the determination of bestatin in rat plasma and its application to a pharmacokinetic study
844
Development of a liquid chromatography-based screening methodology for proteolytic enzyme activity
845
Development of a liquid chromatography–electrospray chemical ionization tandem mass spectrometry analytical method for analysis of eleven hydroxylated polybrominated diphenyl ethers
846
Development of a liquid chromatography–electrospray ionization tandem mass spectrometry (LC–ESI MS/MS) method for the quantification of bioactive substances present in olive oil mill wastewaters Original Research Article
847
Development of a liquid chromatography–electrospray mass spectrometric method for the simultaneous analysis of benzoxazolinones and their degradation products
848
Development of a Liquid Chromatography-Electrospray-Tandem Mass Spectrometry Method for the Quantitative Determination of Benzoxazinone Derivatives in Plants
849
Development of a liquid chromatography–mass spectrometric method for measuring the binding of memantine to different melanins
850
Development of a liquid chromatography–mass spectrometry (LC/MS) assay method for the quantification of PSC 833 (Valspodar) in rat plasma
851
Development of a liquid chromatography–mass spectrometry method for monitoring the angiotensin-converting enzyme inhibitor lisinopril in serum
852
Development of a liquid chromatography–mass spectrometry method for the high-accuracy determination of creatinine in serum
853
Development of a liquid chromatography–tandem mass spectrometric method for the determination of methamphetamine and amphetamine using small volumes of rat serum
854
Development of a liquid chromatography–tandem mass spectrometry assay of six antimicrobials in plasma for pharmacokinetic studies in premature infants
855
Development of a liquid chromatography–tandem mass spectrometry method for the determination of 23 endogenous steroids in small quantities of primate urine
856
Development of a liquid chromatography–tandem mass spectrometry method for the identification of natural androgen steroids and their conjugates in urine samples
857
Development of a liquid chromatography–tandem mass spectrometry method for the identification of natural androgen steroids and their conjugates in urine samples Original Research Article
858
Development of a liquid chromatography–tandem mass spectrometry procedure for determination of endocrine disrupting compounds in fish from Mediterranean rivers
859
Development of a liquid chromatography-tandem mass spectrometry with pressurized liquid extraction for determination of glucocorticoid residues in edible tissues
860
Development of a liquid chromatography–tandem mass spectrometry with pressurized liquid extraction method for the determination of benzimidazole residues in edible tissues
861
Development of a liquid chromatography–tandem mass spectrometry with ultrasound-assisted extraction and auto solid-phase clean-up method for the determination of Fusarium toxins in animal derived foods
862
Development of a liquid chromatography–tandem mass spectrometry with ultrasound-assisted extraction method for the simultaneous determination of sudan dyes and their metabolites in the edible tissues and eggs of food-producing animals
863
Development of a liquid scintillator neutron multiplicity counter (LSMC)
864
Development of a liquid scintillator neutron multiplicity counter (LSMC)
865
Development of a liquid stub tuner for the KSTAR ICRF system
866
Development of a liquid stub tuner for the KSTAR ICRF system
867
Development of a liquid toner for electro-photographic solid freeform fabrication
868
Development of a liquid xenon scintillation detector for a new experiment to search for μ→eγ decays
869
Development of a liquid xenon scintillation detector for a new experiment to search for μ→eγ decays
870
Development of a liquid–chromatography tandem mass spectrometry and ultra-high-performance liquid chromatography high-resolution mass spectrometry method for the quantitative determination of zearalenone and its major metabolites in chicken and pig plasma
871
Development of a liquid–liquid extraction procedure for five 1,4-dihydropyridines calcium channel antagonists from human plasma using experimental design
872
Development of a liquid-xenon photon detector––towards the search for a muon rare decay mode at Paul Scherrer Institute Original Research Article
873
Development of A Literacy-Appropriate Health Education Package to Create Awareness of Periodontal Disease and Diabetes
874
Development of a live, attenuated, potential vaccine strain of R. equi expressing vapA and the virR operon, and virulence assessment in the mouse
875
Development of a live, attenuated, potential vaccine strain of R. equi expressing vapA and the virR operon, and virulence assessment in the mouse
876
Development of a Liver Phantom Based on Computed Tomography Images for Dosimetric Purpose
877
Development of a loading dock safety evaluation tool
878
Development of a load-insensitive ICRH antenna system on TEXTOR
879
Development of a LOCA analysis code for the supercritical-pressure light water cooled reactors
880
Development of a Local Model of Inclusive Education for Students with Special Needs in the Exceptional Education Organization
881
Development of a local real world driving cycle for motorcycles for emission factor measurements
882
Development of a local three-dimensional numerical simulation model for the laser forming process of aluminium components
883
Development of a localized heat treatment system for shape memory alloy wires using an ytterbium fiber laser
884
Development of a localized probabilistic sensitivity method to determine random variable regional importance
885
Development of a localized probabilistic sensitivity method to determine random variable regional importance
886
Development of a locally designed and manufactured small-scale reverse osmosis desalination system Original Research Article
887
Development of a locking femur nail for mice
888
Development of a long life 35 Ah capacity VRLA battery for load-leveling applications
889
Development of a long reach articulated manipulator for ITER in vessel inspection under vacuum and temperature
890
Development of a long-lasting ventricular catheter impregnated with a combination of antibiotics
891
Development of a long-life capillary enzyme bioreactor for the determination of blood glucose
892
Development of a long-term monitoring system based on FBG sensors applied to concrete bridges
893
Development of a long-term stable organic membrane-based thin-film microsensor using new-type substrate surface treatment
894
Development of a long-wavelength fluorescent probe based on quinone–methide-type reaction to detect physiologically significant thiols Original Research Article
895
Development of A Loop-Mediated Isothermal Amplification (LAMP) Assay for Detection of Relapsing Fever Borreliae
896
Development of a loop-mediated isothermal amplification assay for rapid detection of Yersinia enterocolitica via targeting a conserved locus
897
Development of a loop-mediated isothermal amplification assay for the detection of Mycobacterium bovis
898
Development of a loop-mediated isothermal amplification method for rapid mass-screening of sand flies for Leishmania infection
899
Development of a low activation concrete shielding wall by multi-layered structure for a fusion reactor
900
Development of a Low Capital Investment Reactor System: Application for Plant Cell Suspension Culture
901
Development of a low charge-to-mass ratio injector for a RIB linac Original Research Article
902
DEVELOPMENT OF A LOW COST AND SAFE PIV FOR MEAN FLOW VELOCITY AND REYNOLDS STRESS MEASUREMENTS
903
Development of a Low Cost Fuel Cell Inverter System With DSP Control
904
Development of a low cost planar detector for positron emission tomography
905
Development of a low cost planar detector for positron emission tomography
906
Development of a low cost star tracker for the SHEFEX mission
907
Development of a low cost Touch Trigger Probe for CNC Lathes
908
Development of a low cost, GPS-based upgrade to a standard handheld gamma detector for mapping environmental radioactive contamination
909
Development of a low data event timer for monitoring an advancing crack in fracture
910
Development of a low energy particle detector using a superconducting transition edge sensor
911
Development of a low energy particle detector using a superconducting transition edge sensor
912
Development of a low pH cementitious material to enlarge bioreceptivity
913
Development of a low pH fermentation strategy for fumaric acid production by Rhizopus oryzae
914
Development of a low Reynolds number enhanced heat transfer surface using flow visualization techniques
915
Development of a low temperature light paraffin isomerization catalysts with improved resistance to water and sulphur by combinatorial methods Original Research Article
916
Development of a low temperature SQUID gradiometer for magnetic microcalorimeters
917
Development of a low temperature SQUID gradiometer for magnetic microcalorimeters
918
Development of a low-color, color stable, dual cure dental resin
919
Development of a low-cost agricultural remote sensing system based on an autonomous unmanned aerial vehicle (UAV)
920
Development of a low-cost dish solar concentrator and its application in zeolite desorption
921
Development of A Low-Cost Method for Determination of Sulfide Ions in Aluminate Solution of Bayer Process and Sulfide Removal Using Nitrate from It
922
Development of a low-cost portable colorimeter for the estimation of fluoride in drinking water
923
Development of a Low-Cost Trackside System for Weighing in Motion and Wheel Defects Detection
924
Development of a low-cost two-stage technique for production of low-sulphur purified konjac flour
925
Development of a low-energy beam transport system at KBSI heavy-ion accelerator
926
Development of a low-energy beam transport system at KBSI heavy-ion accelerator
927
Development of a low-energy monoenergetic neutron source for applications in low-dose radiobiological and radiochemical research
928
Development of a lower body negative pressure box with an environmental control system for physiological studies Original Research Article
929
Development of a lower confidence limit for the number of signals
930
Development of a low-expansion bond coating for Ni-base superalloys
931
Development of a low-expansion bond coating for Ni-base superalloys
932
Development of a low-level background gamma-ray spectrometer by KRISS
933
Development of a low-level RF control system for PET cyclotron CYCIAE-14
934
Development of a low-level RF control system for PET cyclotron CYCIAE-14
935
Development of a low-moisture-content storage system for brown rice: Storability at decreased moisture contents
936
Development of a low-noise analog front-end ASIC for APD-PET detectors
937
Development of a low-noise analog front-end ASIC for APD-PET detectors
938
Development of a low-noise analog front-end ASIC for CdTe detectors
939
Development of a low-noise analog front-end ASIC for CdTe detectors
940
Development of a low-noise, two-dimensional amplifier array
941
Development of a low-noise, two-dimensional amplifier array
942
Development of a low-power thick-film gas sensor deposited by screen-printing technique onto a micromachined hotplate
943
Development of a low-sodium ready-to-eat desalted cod Original Research Article
944
Development of a low-temperature 3He compressor for superfluid 3He–4He mixtures Original Research Article
945
Development of a low-temperature germanium detector via mechanical cooling with a compact pulse-tube refrigerator
946
Development of a low-temperature germanium detector via mechanical cooling with a compact pulse-tube refrigerator
947
Development of a low-temperature two-stage fluidized bed incinerator for controlling heavy-metal emission in flue gases
948
Development of a LPG fuel processor for PEFC systems: Laboratory scale evaluation of autothermal reforming and preferential oxidation subunits
949
Development of a luminol-based chemiluminescence flow-injection method for the determination of dichlorvos pesticide
950
Development of a lymphocyte-transformation-assay for peripheral blood lymphocytes of the harbor porpoise and detection of cytokines using the reverse-transcription polymerase chain reaction
951
Development of a lymphocyte-transformation-assay for peripheral blood lymphocytes of the harbor porpoise and detection of cytokines using the reverse-transcription polymerase chain reaction
952
Development of a M13 bacteriophage-based SPR detection using Salmonella as a case study
953
DEVELOPMENT OF A MACHINE FOR COLD PULPING OF TOMATO
954
Development of a machine for the automatic sorting of pomegranate (Punica granatum) arils based on computer vision Original Research Article
955
Development of a machine integrated strain-based contact force sensor for pad foot soil compactors
956
Development of a machine learning technique for automatic analysis of seafloor image data: Case example, Pogonophora coverage at mud volcanoes
957
Development of a machine troubleshooting expert system via fuzzy multiattribute decision-making approach
958
Development of a machine vision system for automatic date grading using digital reflective near-infrared imaging Original Research Article
959
Development of a macroinvertebrate multimetric index for the assessment of low-land streams in the neotropics
960
Development of a macrophyte-based index of biotic integrity for Minnesota lakes
961
Development of a maglev lens driving actuator for off-axis control and adjustment of the focal point in laser beam machining
962
Development of a magnesium secondary alloy system for mixed magnesium post-consumer scrap
963
Development of a magnet power supply with sub-ppm ripple performance for J-PARC with a novel common-mode rejection method with an NPC inverter
964
Development of a magnet power supply with sub-ppm ripple performance for J-PARC with a novel common-mode rejection method with an NPC inverter
965
Development of a magnetic bead fluorescence microscopy immunoassay to detect and quantify Leptospira in environmental water samples
966
Development of a magnetic field model and insertion into a commercial electromagnetic simulator
967
Development of a magnetic focusing device for pulsed neutrons
968
Development of a magnetic focusing device for pulsed neutrons
969
Development of a magnetic particle immunoassay for polybrominated diphenyl ethers and application to environmental and food matrices Original Research Article
970
Development of a Magnetic Suspension Densimeter and Measurement of the Density of Toluene
971
Development of a magnetohydrodynamic simulation code satisfying the solenoidal magnetic field condition Original Research Article
972
Development of a magnetospheric state-based trapped radiation database Original Research Article
973
Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring
974
Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring
975
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study
976
Development of a Maize Breakage Test Method using a Commercial Food Processor
977
Development of a major polygonal fault system in Upper Cretaceous chalk and Cenozoic mudrocks of the Sable Subbasin, Canadian Atlantic margin
978
Development of a malaria vaccine
979
Development of a Management Model for a Surface Waterlogged and Drainage Congested Area
980
Development of a mandarin fish Siniperca chuatsi fry cell line suitable for the study of infectious spleen and kidney necrosis virus (ISKNV)
981
Development of a manual method for the determination of mineral oil in foods and paperboard
982
Development of a manufacturing process for Zr-based spacer grid materials
983
Development of a market penetration forecasting model for Hydrogen Fuel Cell Vehicles considering infrastructure and cost reduction effects
984
Development of a marketing information system for supporting sales in a Tea-beverage market
985
Development of a Marking Composition Based on Nanoaluminum and Iron Ore Concentrate for Mixed Explosives and Their Subsequent Identification
986
Development of a Mars dust characterization instrument
987
Development of a maskless electrochemical texturing method
988
Development of a mass spectrometry method for the determination of a melanoma biomarker, 5-S-cysteinyldopa, in human plasma using solid phase extraction for sample clean-up
989
Development of a mass-producible glucose biosensor and flow-injection analysis system suitable for on-line monitoring during fermentations
990
Development of a master sintering curve for ThO2
991
Development of a material balance equation for coalbed methane reservoirs accounting for the presence of water in the coal matrix and coal shrinkage and swelling
992
Development of a mathematical expression for the variation of amorphization phenomenon during intensive milling of minerals
993
Development of a Mathematical Framework for Comparison of Underlay and Overlay Systems
994
Development of a Mathematical Method for Classifying and Comparing Tree Architecture Using Parameters from a Topological Model of a Trifurcating Botanical Tree
995
Development of a mathematical model and simulation of mass transfer of solar ethanol distillation in modified brewery tank
996
Development of a mathematical model by means of experimental design for alkylation of m-cresol with cyclopentene
997
Development of a mathematical model for a curved slat venetian blind with thickness
998
Development of a Mathematical Model for MAP Systems Applied to Nonrespiring Foods
999
Development of a mathematical model for online microextraction by packed sorbent under equilibrium conditions and its application for polycyclic aromatic hydrocarbon determination in water by gas chromatography–mass spectrometry
1000
Development of a mathematical model for simulating gas and water vapor exchanges in modified atmosphere packaging with macroscopic perforations Original Research Article