<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Development of aromatic ring size in bituminous coals during heat treatment in the plastic temperature range
2
Development of arrays of transition edge sensors for application in X-ray astronomy
3
Development of arrays of transition edge sensors for application in X-ray astronomy
4
Development of artemisinin and its structurally simplified trioxane derivatives as antimalarial drugs
5
Development of arthrosis following dislocation of the shoulder: A case-control study
6
Development of Artificial Hand Gripper by using Microcontroller
7
Development of Artificial Intelligence as a Conversion Tool for Cine Electronic Portal Imaging Device Images to Radiotherapy Dosimetry: Preliminary Study
8
Development of artificial neural network models for predicting water saturation and fluid distribution
9
Development of Artificial Neural Networks (ANNs) to Synthesize Petrophysical Well Logs
10
Development of ARX model based off-line FDD technique for energy efficient buildings
11
Development of A-scan ultrasound technique for measuring local particle concentration in slurry flows
12
Development of as-cast dual matrix structure (DMS) ductile iron
13
Development of a-Si:H/c-Si heterojunctions for the i2-module concept: Low-temperature passivation and emitter formation on wafers bonded to glass
14
Development of Asiaʹs emerging capital market: What lies ahead
15
Development of Assays for Assessing Induced Systemic Resistance by Plant Growth-Promoting Rhizobacteria against Blue Mold of Tobacco
16
Development of assemblages associated with alvinellid colonies on the walls of high-temperature vents at the East Pacific Rise
17
Development of assessing generic and specific technical skills in laparoscopic surgery
18
Development of assessment model for demand-side management investment programs in Korea
19
Development of asymmetric 6FDA-2,6 DAT hollow fiber membranes for CO2/CH4 separation: 1. The influence of dope composition and rheology on membrane morphology and separation performance
20
Development of asymmetric 6FDA-2,6DAT hollow fiber membranes for CO2/CH4 separation: Part 2. Suppression of plasticization
21
Development of asymmetric BTDA-TDI/MDI (P84) copolyimide flat sheet and hollow fiber membranes for ultrafiltration: Morphology transition and membrane performance Original Research Article
22
Development of asymmetric BTDA-TDI/MDI (P84) co-polyimide hollow fiber membranes for ultrafiltration: the influence of shear rate and approaching ratio on membrane morphology and performance
23
Development of asymmetric gradational-changed porous chitosan membrane for guided periodontal tissue regeneration
24
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review
25
Development of asymmetrical flow field-flow fractionation–multi angle laser light scattering analysis for molecular mass characterization of cationic potato amylopectin
26
Development of athermal ε-martensite in atomized Co–Cr–Mo–C implant alloy powders
27
Development of atherosclerosis in Balb/c apolipoprotein E-deficient mice
28
Development of atherosclerosis in the diabetic BALB/c mice: Prevention with Vitamin E administration
29
Development of atherosclerosis over a 25 year period: an epidemiological autopsy study in males of 11 towns
30
Development of atherosclerotic plaque with endothelial disruption in Watanabe heritable hyperlipidemic rabbit aortas
31
Development of Atlantic cod (Gadus morhua) exposed to produced water during early life stages: Effects on embryos, larvae, and juvenile fish
32
Development of atmospheric monitoring system at Akeno Observatory for the Telescope Array project
33
Development of atmospheric monitoring system at Akeno Observatory for the Telescope Array project
34
Development of atmospheric NO analyzer by using a laser-induced fluorescence NO2 detector
35
Development of atom probe specimen preparation techniques for specific regions in steel materials
36
Development of atom probe specimen preparation techniques for specific regions in steel materials
37
Development of atomic beam probe for tokamaks
38
DEVELOPMENT OF ATTITUDE SCALE DEVOTED TO THE USAGE OF TECHNOLOGY IN PRE-SCHOOL EDUCATİON
39
Development Of Attitude Scale Towards Proof and Proving: The Case Of Mathematics Student Teachers
40
Development of A-type olivine fabric in water-rich deep upper mantle
41
Development of Au/La1−xSrxMnO3 nanocomposites for further application in a solid oxide fuel cell type reactor
42
Development of Au-coated THGEM for single photon, charged particle, and neutron detection
43
Development of Au-coated THGEM for single photon, charged particle, and neutron detection
44
Development of audible locating signals for use at pedestrian crossings
45
Development of audit system for intellectual property management excellence
46
Development of auditory evoked fields in human fetuses and newborns: A longitudinal MEG study
47
Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process
48
Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process
49
Development of austenite free ADI (austempered ductile cast iron)
50
development of autograph-based learning tools to improve mathematical communication skills students in vocational high school
51
Development of Autologous T Lymphocytes in Two Males with X-Linked Severe Combined Immune Deficiency: Molecular and Cellular Characterization
52
Development of automated communication of system for managing site information using internet technology
53
Development of Automated Intravenous Blood Infusion Monitoring System using Load Cell Sensor
54
Development of automated online gel permeation chromatography–gas chromatograph mass spectrometry for measuring multiresidual pesticides in agricultural products
55
Development of automated operating procedure system using fuzzy colored petri nets for nuclear power plants
56
Development of automated surface seawater nitrate mapping systems for use in open ocean and coastal waters
57
Development of Automatic Feeding Machine for Aquaculture Industry
58
Development of automatic grading machine prototype for citrus using image processing
59
Development of Automatic/Manual Power Off, Power Change over Device
60
Development of autonoetic autobiographical memory in school-age children: Genuine age effect or development of basic cognitive abilities?
61
Development of autonomous bio-production vehicle for agriculture
62
Development of Autonomous Cruise Control System for Convoy Vehicle
63
Development of Auxotrophic Agrobacterium tumefaciens for Gene Transfer in Plant Tissue Culture
64
Development of avalanche-drift and avalanche-pixel detectors for single photon detection and imaging in the optical regime
65
Development of avalanche-drift and avalanche-pixel detectors for single photon detection and imaging in the optical regime
66
Development of AZ31 Mg alloy wrought process route without protective gas
67
Development of azithromycin–PLGA nanoparticles: Physicochemical characterization and antibacterial effect against Salmonella typhi
68
DEVELOPMENT OF BACKGROUND VALUES FOR INORGANICS IN GROUND WATER
69
DEVELOPMENT OF BACKGROUND VALUES FOR INORGANICS IN GROUND WATER
70
Development of badlands and gullies in the Sneeuberg, Great Karoo, South Africa
71
Development of Ba-hexaferrite coatings for electromagnetic wave absorption applications
72
Development of bainitic rail steels with potential resistance to rolling contact fatigue
73
Development of Barkhausen noise calibration blocks for reliable grinding burn detection
74
Development of Ba-SAPO-34 Zeolite Membrane for Separation of CO2 in the Binary Gas Mixtures
75
Development of base-dopable polymers
76
Development of Basic Prequisites of Quality Education System in PhD Studies at the Faculties of Health Sciences in Bosnia and Herzegovina
77
Development of Batch Injection Analysis for Electrochemical Measurements of Trace Metal Ions in Ecotoxicological Test Media
78
Development of battery management system for nickel–metal hydride batteries in electric vehicle applications
79
Development of Bayesian Inference to Predict household Trip Production (Case Study of Isfahan City)
80
Development of B-cell memory and effector function
81
Development of BCU classifiers for on-line dynamic contingency screening of electric power systems
82
Development of Be/DSCu HIP bonding and thermo-mechanical evaluation
83
Development of beam probe diagnostics and recent measurements on the TJ-1 and T-10 tokamaks
84
Development of beam source and bushing for ITER NB system
85
Development of Bearing Capacity Equation for Rectangular Footing under Inclined Loading on Layered Sand
86
Development of behavioural differences between individuals and populations of sticklebacks, Gasterosteus aculeatus
87
Development of Behavioural Models for Mechanically Loaded Microcantilevers and Beams
88
Development of BEM for thermoviscous flow Original Research Article
89
Development of bench and full-scale temperature and pH responsive functionalized PVDF membranes with tunable properties
90
Development of benchmark models for the Egyptian residential buildings sector
91
Development of Benson-Mayers theory on the wrinkling of anisotropic sandwich panels
92
Development of berberine attraction sites onto cellulosic substrates modified by reactive bridging agent: Statistical optimization and analysis
93
Development of beriberi heart disease 20 years after gastrojejunostomy
94
Development of bestatin-based activity-based probes for metallo-aminopeptidases
95
Development of Bi-2223 HTS tape and its application to coil and current leads Original Research Article
96
Development of Bicycle Shift Models in Universiti Kebangsaan Malaysia Campus
97
Development of bi-enzyme microbiosensor based on solid-contact ion-selective microelectrodes for protein detection
98
Development of bifacial PV cells for new applications of flat-plate modules
99
Development of bilinear power system representations for small signal stability analysis
100
Development of bi-metal doped micro- and nano multi-functional polymeric adsorbents for the removal of fluoride and arsenic(V) from wastewater Original Research Article
101
Development of bimetal oxide doped multifunctional polymer nanocomposite for water treatment
102
Development of bimetal-grown multi-scale carbon micro-nanofibers as an immobilizing matrix for enzymes in biosensor applications
103
Development of bimodal cobalt catalysts for Fischer–Tropsch synthesis
104
Development of binary dispersions and nanocomposites of irbesartan with enhanced antihypertensive activity
105
Development of binding assays to screen ligands for Plasmodium falciparum thioredoxin and glutathione reductases by ultrafiltration and liquid chromatography/mass spectrometry
106
Development of bio/blood compatible polypropylene through low pressure nitrogen plasma surface modification
107
Development of bioactive and biodegradable chitosan-based injectable systems containing bioactive glass nanoparticles
108
Development of bioactive bone cement and its clinical applications
109
Development of bioactive food packaging materials using immobilised bacteriocins Lacticin 3147 and Nisaplin®
110
Development of bioactive materials based on surface chemistry
111
Development of bioactive organic–inorganic hybrid for bone substitutes
112
Development of bioactive peptide amphiphiles for therapeutic cell delivery
113
Development of Bioactive Surface Coatings for Tissue Engineering Applications
114
Development of Bioadhesive Transdermal Bupivacaine Gels for Enhanced Local Anesthetic Action
115
Development of bioaerosol technique for the evaluation of microbial growth on inert surfaces
116
Development of Bio-artificial Esophageal Tissue Engineering Utilization for Circumferential Lesion Transplantation: A Narrative Review
117
Development of bioassays to evaluate wild pea germplasm for resistance to pea weevil (Coleoptera: Bruchidae)
118
Development of biobased products
119
Development of Biobased Synthetic Fluids: Application of Molecular Modeling to StructurePhysical Property Relationship
120
Development of Biobased Unsaturated Polyester Containing Functionalized Linseed Oil
121
Development of biocalorimetry as a technique for process monitoring and control in technical scale fermentations
122
Development of biocatalysts for production of commodity chemicals from lignocellulosic biomass
123
Development of biochars from pyrolysis of lotus stalks for Ni(II) sorption: Using zinc borate as flame retardant
124
Development of biochars from pyrolysis of lotus stalks for Ni(II) sorption: Using zinc borate as flame retardant
125
Development of bio-climatic zones in north-east India
126
Development of Biocompatible Film Fabricate from Polylactic Acid Incorporating Roselle Calyx Extract and Halloysite Nanoclay
127
Development of bioconsortia for optimizing nutrient supplementation through microbes for sustainable tobacco production
128
Development of biocontrol agents from food microbial isolates for controlling post-harvest peach brown rot caused by Monilinia fructicola
129
Development of biodegradable coatings for covered horizontal bunker-stored silage
130
Development of biodegradable crosslinked urethane-doped polyester elastomers
131
Development of biodegradable electrospun scaffolds for dermal replacement
132
Development of biodegradable flexible films of starch and poly(lactic acid) plasticized with adipate or citrate esters
133
Development of biodegradable laminate films derived from naturally occurring carbohydrate polymers
134
Development of biodegradable Mg–Ca alloy sheets with enhanced strength and corrosion properties through the refinement and uniform dispersion of the Mg2Ca phase by high-ratio differential speed rolling
135
Development of biodegradable nanoparticles for delivery of quercetin
136
Development of Biodegradable Plastic Composite Blends Based on Sago Derived Starch and Natural Rubber
137
Development of biodegradable porous scaffolds for tissue engineering
138
Development of biodiesel from karanja, a tree found in rural India
139
Development of biodiesel: Current scenario
140
Development of biodiversity in field margins recently taken out of production and adjacent ditch banks in arable areas
141
Development of Bioelectrical Impedance Analysis Equations (BIA) Equations to Predict Body Composition of Indian Males
142
Development of bioenergy technologies in Uganda: A review of progress
143
Development of biofilm on geotextile in a new multi-zone wastewater treatment system for simultaneous removal of COD, nitrogen and phosphorus
144
Development of Biofuel as Marine Low-viscosity Fuels with Environmentally Friendly Components
145
Development of biofuels for the UK automotive market
146
Development of biofuels for the UK automotive market
147
Development of biogas reforming Ni-La-Al catalysts for fuel cells
148
Development of biogeochemical interfaces in an artificial soil incubation experiment; aggregation and formation of organo-mineral associations
149
Development of bio-inspired chelates with hydrogen bond donors: synthesis and structure of monomeric metal acetate complexes with intramolecular hydrogen bonds
150
Development of bio-inspired chelates with hydrogen bond donors: synthesis and structure of monomeric metal acetate complexes with intramolecular hydrogen bonds
151
Development of biological filter as tertiary treatment for effective nitrogen removal: Biological filter for tertiary treatment
152
Development of biological soil quality indicator system for subtropical China
153
Development of biomarkers utilizing variable lymphocyte receptors (VLRS) of inshore hagfish (Eptatretus burgeri)
154
Development of biomechanical response corridors of the thorax to blunt ballistic impacts
155
Development of Biomedical Image Processing Software Package for New Learners
156
Development of Biomedical Microrobot for Intravascular Therapy
157
Development of biomedical porous titanium filled with medical polymer by in-situ polymerization of monomer solution infiltrated into pores
158
Development of biomimetic coatings on Sm oxide doped ELB (Eu–Li–borate) glasses
159
Development of biomimetic nano-hydroxyapatite/poly(hexamethylene adipamide) composites
160
Development of bio-nanowire networks using phage-enabled assembly for biological sensor application
161
Development of bio-physical properties during storage of poplar chips from 15 ha test fields
162
Development of Bio-PORec® system for polyhydroxyalkanoates (PHA) production and its storage in mixed cultures of palm oil mill effluent (POME)
163
Development of bioreactor systems with functional bio-carrier modified by disperse turquoise blue S-GL for disperse scarlet S-BWFL decolorization
164
Development of bioresorbable Mg-substituted tricalcium phosphate scaffolds for bone tissue engineering
165
Development of biosensor based on ionic liquid and corn peroxidase immobilized on chemically crosslinked chitin
166
Development of biosensor for phenolic compounds containing PPO in β-cyclodextrin modified support and iridium nanoparticles
167
Development of biosensors based on an electrolyte isolator semiconductor (EIS) -capacitor structure and their application for process monitoring. Part I. Development of the biosensors and their characterization
168
Development of biosensors based on hexacyanoferrates
169
Development of biosensors containing laccase and imidazolium bis(trifluoromethylsulfonyl)imide ionic liquid for the determination of rutin Original Research Article
170
Development of biosensors for the detection of COVID-19
171
Development of biosorption-based algal biosensor for Cu(II) using Tetraselmis chuii
172
Development of biosorption-based algal biosensor for Cu(II) using Tetraselmis chuii
173
Development of Biotin–Avidin Technology to Investigate Okadaic Acid-Promoted Cell Signaling Pathway
174
Development of bipolar plates for fuel cells from graphite filled wet-lay material and a compatible thermoplastic laminate skin layer
175
Development of bipolar plates for fuel cells from graphite filled wet-lay material and a thermoplastic laminate skin layer
176
Development of bipolar-pulse accelerator for intense pulsed ion beam acceleration
177
Development of bipolar-pulse accelerator for intense pulsed ion beam acceleration
178
Development of birch (Betula pendula Roth.) sap based probiotic fermented beverage
179
Development of bismuth self-powered detector
180
Development of bismuth self-powered detector
181
Development of bismuth tellurium selenide nanoparticles for thermoelectric applications via a chemical synthetic process
182
Development of bi-stable and millimeter-scale displacement actuator using snap-through effect for reciprocating control fins
183
Development of bis-thiourea-type organocatalyst for asymmetric Baylis–Hillman reaction
184
Development of blanket box structure fabrication technology
185
Development of blast furnace slag mixtures against frost salt attack
186
Development of blended cement mortars with acoustic properties using petroleum coke
187
Development of Blockchain Technology
188
Development of blood–yolk–polymyxin B–trimethoprim agar for the enumeration of Bacillus cereus in various foods
189
Development of blue ceramic dyes from cobalt phosphates
190
Development of BODIPY-based fluorescent DNA intercalating probes
191
Development of Body Dissatisfaction Scale for University Students
192
Development of Body Mass Index Growth Standard Chart for Chinese Preschool Children
193
Development of boldness and docility in yellow-bellied marmots
194
Development of bolometric light detectors for double beta decay searches
195
Development of bolometric light detectors for double beta decay searches
196
Development of bond-order potentials that can reproduce the elastic constants and melting point of silicon for classical molecular dynamics simulation
197
Development of bone canaliculi during bone repair
198
Development of bone-like composites via the polymer-induced liquid-precursor (PILP) process. Part 1: Influence of polymer molecular weight
199
Development of Borderline Personality Disorder in Adolescence and Young Adulthood: Introduction to the Special Section
200
Development of both-side junction silicon space solar cells
201
Development of boundary conditions for direct numerical simulations of three-dimensional vortex breakdown phenomena in semi-infinite domains
202
Development of Boundary Layer of Highly Elastic Flow of the Upper Convected Maxwell Fluid over a Stretching Sheet
203
Development of bovine and porcine embryonic teratomas in athymic mice
204
Development of bovine–ovine interspecies cloned embryos and mitochondria segregation in blastomeres during preimplantation
205
Development of brain metastasis 5 years before the appearance of the primary lung cancer: “messenger metachronous metastasis”
206
Development of Brand Community in Iranian New Sport Teams
207
Development of brazing foils to join monocrystalline tungsten alloys with ODS-EUROFER steel
208
Development of breast muscle and meat quality in Arbor Acres broilers, Jingxing 100 crossbred chickens and Beijing fatty chickens
209
Development of breed identification markers based on a bovine 50K SNP array
210
Development of breed identification markers derived from AFLP in beef cattle
211
Development of breeding and fingerling production techniques for endangered long-whiskered catfish Sperata aor in captivity
212
Development of breeding strategy based on body coloration and phenotype in Holstein Friesian crossbreds for sustainable milk production
213
DEVELOPMENT OF BRICK USING THERMAL POWER PLANT BOTTOM ASH AND FLY ASH
214
Development of bricks from granulated blast furnace slag
215
Development of Broad Spectrum Antibodies to Heat Shock Protein 70s as Biomarkers for Detection of Multiple Stress by Pollutants and Environmental Factors
216
Development of BRS-Pontal beans growing with treated domestic wastewater in protected environment
217
Development of bubble chambers with enhanced stability and sensitivity to low-energy nuclear recoils
218
Development of bubble chambers with enhanced stability and sensitivity to low-energy nuclear recoils
219
Development of bubble cluster detection and identification method
220
Development of bubble departure and lift-off diameter models in low heat flux and low flow velocity conditions
221
DEVELOPMENT OF BUBBLY BOILING IN CHANNEL FLOW
222
Development of buccal tablets for curcumin using Anacardium occidentale gum
223
Development of buckwheat and teff sourdoughs with the use of commercial starters
224
Development of building vulnerability functions in subsidence regions from empirical methods
225
Development of bulk metallic glasses based on the Dy-Al binary eutectic composition
226
Development of bumper shield using low density materials
227
Development of Buoy System Instrument using A-WSN ZigBee Protocol for Coastal Ecosystem Monitoring
228
Development of Burden Scale for Dietary Behavior Appropriate for College Athletes
229
Development of Burner Assemblies for Efficient and Environmentally Friendly Combustion of Solid Fuel
230
Development of Burner Assemblies for Efficient and Environmentally Friendly Combustion of Solid Fuel
231
Development of bus body rubber profiles with additives from renewable sources: Part I – Additives characterization and processing and cure properties of elastomeric compositions
232
Development of bus body rubber profiles with additives from renewable sources: Part II – Chemical, physical–mechanical and aging characterization of elastomeric compositions
233
Development of butyl elastomer/methacrylate monomer systems as denture soft lining materials
234
Development of butyl rubber–rutile composites for flexible microwave substrate applications
235
Development of BWR regional instability model and verification based on ringhals 1 test
236
Development of C18-functionalized magnetic silica nanoparticles as sample preparation technique for the determination of ergosterol in cigarettes by microwave-assisted derivatization and gas chromatography/mass spectrometry
237
Development of C-20 modified betulinic acid derivatives as antitumor agents
238
Development of cabbage webworm, Hellula undalis (Fabr.)on head cabbage,Brassica oleracea var. capitata
239
Development of cadmium/silver/palladium separation by ion chromatography with quadrupole inductively coupled plasma mass spectrometry detection for off-line cadmium isotopic measurements
240
Development of CAE for predicting stiffness of SMC structure: Estimation of Young’s modulus in rib part
241
Development of CaF2 special refractory components
242
Development of calcium pectinate-tamarind seed polysaccharide mucoadhesive beads containing metformin HCl
243
Development of calcium phosphate based functional gradient bioceramics
244
Development of calcium phosphate cement
245
Development of calcium phosphate cement using chitosan and citric acid for bone substitute materials
246
Development of calcium sulfate–ggbs–Portland cement binders
247
Development of calibration standards for fourier transform infrared spectrometer in continuous monitoring of incinerator emissions
248
Development of Calibration-Free Laser-Induced-Breakdown-Spectroscopy based techniques for deposited layers diagnostics on ITER-like tiles
249
Development of California Public Health Goals (PHGs) for Chemicals in Drinking Water
250
Development of calixarene-based host molecules for peptides in aqueous media
251
Development of camelid monoclonal nanobody against SLC39A6 zinc transporter protein
252
Development of CaMoO4 crystal scintillators for a double beta decay experiment with
253
Development of CaMoO4 crystal scintillators for a double beta decay experiment with
254
Development of cancer treatment guidelines
255
Development of candu reactor physics calculation system based on WIMS code
256
Development of can-type low NOx combustor for micro gas turbine (fundamental characteristics in a primary combustion zone with upward swirl)
257
Development of CaO coatings by thermal and chemical vapor deposition
258
Development of CAP process for fabrication of ThO2–UO2 fuels Part I: Fabrication and densification behaviour
259
Development of CAP process for fabrication of ThO2–UO2 fuels Part II: Characterization and property evaluation
260
Development of capacitance-based and impedance-based wireless sensors and sensor nodes for structural health monitoring applications
261
Development of capillary column packed with thiol-modified gold-coated polystyrene particles and its selectivity for aromatic compounds
262
Development of capillary electrochromatography with poly(styrene-divinylbenzene-vinylbenzenesulfonic acid) monolith as the stationary phase
263
Development of Capillary Electrophoresis as An Alternative to High Resolution Agarose Electrophoresis for the Diagnosis of Multiple Sclerosis
264
Development of capillary electrophoresis for the determination of metal ions using mixed partial and complete complexation techniques
265
Development of capillary size exclusion chromatography for the analysis of monoclonal antibody fragments extracted from human vitreous humor
266
Development of Carbamazepine Nanostructured Lipid Carrier Loaded Thermosensitive Gel for Intranasal Delivery
267
Development of carbohydrate-derived inhibitors of acid sphingomyelinase Original Research Article
268
Development of Carbon Cloth/PMG/PAMAM/MWCNTs/ADH Bioanode for Ethanol Biofuel Cell
269
Development of carbon composite bipolar plate (BP) for vanadium redox flow battery (VRFB)
270
Development of carbon dioxide (CO2) sensor for grain quality monitoring
271
Development of carbon fabric/graphite hybrid bipolar plate for PEMFC
272
Development of carbon foils with a thickness of up to 600 μg/cm2
273
Development of carbon foils with a thickness of up to 600 μg/cm2
274
Development of carbon micro-coils and their future prospects
275
Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties
276
Development of Carbon Nanostructured Based Electrochemical Sensors for Pharmaceutical Analysis
277
Development of carbon nanotube and carbon xerogel supported catalysts for the electro-oxidation of methanol in fuel cells Original Research Article
278
Development of carbon nanotube-based gas sensors for NOx gas detection working at low temperature
279
Development of carbon nanotubes and nanofluids based microbial fuel cell
280
Development of Carbon Paste Electrode/EDTA/Polymer Sensor for Heavy Metals Detection
281
Development of carbon precursor from bamboo tar
282
Development of carbon sheet pump for control of hydrogen recycling in the GAMMA 10 tandem mirror
283
Development of carbon supported metal catalysts for the simultaneous reduction of NO and N2O
284
Development of carbon/carbon composites by co-carbonization of phenolic resin and oxidised pan fibers Original Research Article
285
Development of carbon/epoxy structural components for a high performance vehicle
286
Development of carbonate platforms on an extensional (rifted) margin: the Valanginian–Albian record of the Prebetic of Alicante (SE Spain)
287
Development of carbon–ceramic composites
288
Development of carbon-filled gas diffusion layer for polymer electrolyte fuel cells
289
Development of carbon—Low alloy steel grades for low temperature applications
290
Development of carbon-supported hybrid catalyst for clean removal of formaldehyde indoors
291
Development of carboxylic acid replacements in indole-N-acetamide inhibitors of hepatitis C virus NS5B polymerase
292
Development of carboxymethyl chitosan hydrogel beads in alcohol-aqueous binary solvent for nutrient delivery applications
293
Development of cardiovascular drugs: The U.S. regulatory milieu from the perspective of a participating nonregulator Review Article
294
Development of Caries Risk Assessment Tool for Iranian Preschoolers: A Primary Validation Study
295
Development of carrot parenchyma softening during heating detected in vivo by dynamic mechanical analysis
296
Development of Cassava (Manihot esculenta Crantz.) somatic embryos during culture with abscisic acid and activated charcoal
297
Development of catalyst libraries for total oxidation of methane: A case study for combined application of “holographic research strategy and artificial neural networks” in catalyst library design Original Research Article
298
Development of catalyst system for selective combustion of hydrogen Original Research Article
299
Development of Catalyst-Membrane System for Oxidative Coupling of Methane by Water
300
Development of catalysts for hydrogen generation from hydride compounds
301
Development of catalysts suitable for hydrogen or syn-gas production from biomass gasification
302
Development of catalytic combustion technology of VOC materials by anodic oxidation catalyst
303
Development of catalytic tar decomposition downstream from a dual fluidized bed biomass steam gasifier
304
Development of catalytically reactive porous membranes for the selective hydrogenation of sunflower oil
305
Development of cataract caused by diabetes mellitus: Raman study
306
Development of cathodes for methanol and ethanol fuelled low temperature (300–600 °C) solid oxide fuel cells
307
Development of cattle TB vaccines in the UK
308
Development of cattle TB vaccines in the UK
309
Development of Causation Model between Automatic Negative Thoughts and Craving Mediating by Cognitive Emotional Regulation among Methadone Maintained Clients
310
Development of cavity microelectrode devices and their uses in various research fields
311
Development of CaZn based glassy alloys as potential biodegradable bone graft substitute
312
Development of cBN ball-nosed end mill with newly designed cutting edge
313
Development of CCVD ceramic insulation for Bi-2212 superconducting wires and Rutherford cables
314
Development of CDPM matrix for the measurement of collaborative design performance in construction
315
Development of CdS based stable thin film photo electrochemical solar cells
316
Development of CdTe pixel detector for synchrotron radiation experiments
317
Development of CdTe pixel detector for synchrotron radiation experiments
318
Development of CdTe pixel detectors for Compton cameras
319
Development of CdTe pixel detectors for Compton cameras
320
Development of CdTe thin films on flexible substrates—a review
321
Development of CdZnTe X-ray detectors at DSRI
322
Development of CdZnTe X-ray detectors at DSRI
323
Development of CeF3 crystal for high-energy electromagnetic calorimetry
324
Development of CeF3 crystal for high-energy electromagnetic calorimetry
325
Development of celestial mechanics in Japan
326
Development of cell-mediated immunity to porcine circovirus type 2 (PCV2) in caesarean-derived, colostrum-deprived piglets
327
Development of cell-mediated immunity to porcine circovirus type 2 (PCV2) in caesarean-derived, colostrum-deprived piglets
328
Development of cellular absorptive tracers (CATs) for a quantitative characterization of microbial mass in flow systems
329
Development of cellular immune responses to Plasmodium falciparum blood stage antigens from birth to 36 months of age in Cameroon
330
Development of cellulose acetate based antimicrobial food packaging materials for controlled release of lysozyme Original Research Article
331
Development of cellulose paper testing strips for quick measurement of glucose using chromogen agent
332
Development of cellulose-based bactericidal nanocomposites containing silver nanoparticles and their use as active food packaging Original Research Article
333
Development of cellulosic ethanol production process via co-culturing of artificial cellulosomal Bacillus and kefir yeast
334
Development of cellulosic polymer based gel of novel ternary mixture of miconazole nitrate for buccal delivery
335
Development of celsian ceramics from fly ash useful for X-ray radiation-shielding application
336
Development of Cement Slurry Composition with Self-healing Properties
337
Development of cement-based lightweight composites – Part 1: Mix design methodology and hardened properties
338
Development of cement-based lightweight composites – Part 2: Durability-related properties
339
Development of cement-based strain sensor for health monitoring of ultra high strength concrete
340
Development of Census-GIS methodology for Pakistan
341
Development of ceramic breeder blankets in Japan
342
Development of ceramic electrochemical sensor based on Bi2Ru2O7+x − RuO2 sub-micron oxide sensing electrode for water quality monitoring
343
Development of ceramic floor tile compositions based on quartzite and granite sludges
344
Development of ceramic mixed potential sensors for automotive applications
345
Development of ceramic tiles from coal fly ash and tincal ore waste
346
Development of ceramic tiles from common clay and blast furnace slag
347
Development of ceria-doped zirconia electrolytes with high toughness and ionic conductivity
348
Development of ceria-supported sulfur tolerant nanocatalysts: Pd-based formulations Original Research Article
349
Development of ceria-supported sulfur tolerant nanocatalysts: Rh-based formulations Original Research Article
350
Development of cermet coatings by kinetic spray technology for the application of die-soldering and erosion resistance
351
Development of certification and audit processes of application service provider for IT outsourcing
352
Development of cesium phosphotungstate salt and chitosan composite membrane for direct methanol fuel cells
353
Development of cesium-incorporated carbon membranes for CO2 separation under humid conditions
354
Development of CFD fire models for deterministic analyses of the cable issues in the nuclear power plant Original Research Article
355
Development of chalcogenide glass photoresists for gray scale lithography
356
Development of Chalcolithic Phases in Gilund through Ceramic Chronology
357
Development of characterisation methods on U(Mo) powders for material testing reactors (MTRs)
358
Development of characteristic equations and robust stability analysis for MIMO move suppressed and shifted DMC
359
Development of characteristic equations and robust stability analysis for SISO move suppressed and shifted DMC
360
Development of characteristic volcanic debris avalanche deposit structures: New insight from distinct element simulations
361
Development of charge integrating multi-grid type MSGC
362
Development of charge integrating multi-grid type MSGC
363
Development of charged ion exchange resin-polymer ultrafiltration membranes to reduce organic fouling
364
Development of check-dam systems in gullies on the Loess Plateau, China
365
Development of chemical beam epitaxy for the deposition of gallium nitride
366
Development of chemical beam epitaxy for the deposition of gallium nitride
367
Development of chemical probes: Toward the mode of action of a methylene-linked di(aryl acetate) E1 Original Research Article
368
Development of Chemical Sensors Based on Redox-Dependent Receptors: N,N-Dimethyldiazapyrenium-Modified Electrodes
369
Development of chemically defined media supporting high cell density growth of Ketogulonicigenium vulgare and Bacillus megaterium
370
Development of chemically modified pencil graphite electrode based on benzo-18-crown-6 and multi-walled CNTs for determination of lead in water samples
371
Development of chemically stable solid phases for the target isolation with reduced nonspecific binding proteins
372
Development of chemiluminescence detection of gold nanoparticles in biological conjugates for immunoassay Original Research Article
373
Development of chemistry attitudes and experiences questionnaire (CAEQ)
374
Development of chemoselective photoreduction of nitro compounds under solar light and blue LED irradiation
375
Development of CHF models for inner and outer RPV gaps in a meltdown severe accident
376
DEVELOPMENT OF CHICKEN ANTIBODIES TO BOVINE INTERFERON alfa
377
Development of Children’s Rights and Comperative Evaluation from Constitutional View
378
Development of childʹs home environment indexes based on consistent families of aggregation operators with prioritized hierarchical information
379
Development of Chinaʹs pumped storage plant and related policy analysis
380
Development of chip-based photocatalyst-assisted reduction device to couple high performance liquid chromatography and inductively coupled plasma-mass spectrometry for determination of inorganic selenium species
381
Development of Chiral Catalysts by Asymmetric Activation for Highly Enantioselective Diethylzinc Addition to Imines
382
Development of Chitosan Acetate Films for Transdermal Delivery of Propranolol Hydrochloride
383
Development of chitosan nanoparticles as drug delivery systems for 5-fluorouracil and leucovorin blends
384
Development of chitosan sponges for buccal administration of insulin
385
Development of chitosan/montmorillonite nanocomposites with encapsulated α-tocopherol
386
Development of chitosan/polyethylene vinyl acetate co-matrix: controlled release of aspirin-heparin for preventing cardiovascular thrombosis
387
Development of chitosan-based antimicrobial leather coatings
388
Development of chitosan-based nanoparticles for pulmonary delivery of itraconazole as dry powder formulation
389
Development of chitosan-based nanoparticles through inter-polymeric complexation for oral drug delivery
390
Development of chitosan–tripolyphosphate fibers through pH dependent ionotropic gelation Original Research Article
391
Development of Chitosan–Tripolyphosphate Nanoparticles as Glycopeptide Antibiotic Reservoirs and Ex Vivo Evaluation for Their Potential to Enhance the Corneal Permeation in Ocular Drug Delivery
392
Development of chlorine dioxide-related by-product models for drinking water treatment
393
Development of chlorotriazine polymer dehydrocondensing reagents (Poly-Trzs)
394
Development of cholesterol biosensor based on immobilized cholesterol esterase and cholesterol oxidase on oxygen electrode for the determination of total cholesterol in food samples
395
Development of cholesterol biosensor with high sensitivity using dual-enzyme immobilization into the mesoporous silica materials
396
Development of Chromanes as Novel Inhibitors of the Uncoupling Proteins Original Research Article
397
Development of chromatofocusing techniques employing mixed-mode column packings for protein separations
398
Development of chromium barrier coatings for solid oxide fuel cells
399
Development of chronic cardiomyopathy in canine Chagas disease correlates with high IFN-γ, TNF-α, and low IL-10 production during the acute infection phase
400
Development of chronic cardiomyopathy in canine Chagas disease correlates with high IFN-γ, TNF-α, and low IL-10 production during the acute infection phase
401
Development of chronic pain following severe accidental injury. Results of a 3-year follow-up study
402
Development of CICC for KSTAR TF coil system
403
Development of CIGS2 solar cells with lower absorber thickness
404
Development of CIGS2 thin film solar cells
405
Development of Circuit-Based Games According to Fundamental Motor Skill Activities for Dyspraxia Children
406
Development of circular arc boundary elements method
407
Development of circulatory-renal limitations to angiotensin-converting enzyme inhibitors identifies patients with severe heart failure and early mortality
408
Development of Civil Literacy Scale: A Study of Validity and Reliability
409
Development of clade- (Roseobacter and Alteromonas) and taxon-specific oligonucleotide probes to study interactions between toxic dinoflagellates and their associated bacteria
410
Development of class pedotransfer functions of soil water retention—A refinement
411
Development of Classroom Assessment Literacy Training Program for University Teachers in Punjab
412
Development of Clay Foam Ceramic as a Support for Fungi Immobilization for Biodiesel Production
413
Development of clean technology in alcohol fermentation industry
414
Development of clean technology in wafer drying processes
415
Development of cleavage amplified polymorphic sequence (CAPS) markers for identification of strawberry cultivars
416
Development of climatic and vegetation conditions and the geochemical and isotopic composition in the Franconian Albvorland aquifer system
417
Development of climatic zones and passive solar design in Madagascar
418
Development of clinical guidelines
419
Development of clinical guidelines
420
Development of Clinical Pharmacy services at King Khalid University Hospital and its impact on the quality of healthcare provided
421
Development of Cloned DNA Probes for Phytoplasma Associated with Loofah Witchesʹ Broom
422
Development of cloned embryos from porcine neural stem cells and amniotic fluid-derived stem cells
423
Development of ClosedCircuit Elastic Mounting for Working Bodies in the Interrow Cultivator
424
Development of closed-loop supply chain mathematical model (cost-benefit-environmental effects) under uncertainty conditions by approach of genetic algorithm
425
Development of Cloud Based Monitoring System for Underground Resistivity and Soil Measurement
426
Development of cloud point extraction using pH-sensitive hydrogel for preconcentration and determination of malachite green
427
Development of CLTD values for buildings located in Kolkata, India
428
Development of Clustering Technique and Genetic Algorithm to Monitor Multivariate Descriptive Processes based on Large-scale Nominal Contingency Tables (Case Study: Renewable Energy Process )
429
Development of CMC hydrogels loaded with silver nano-particles for medical applications
430
Development of CMS/Al2O3-supported PPO composite membrane for hydrogen separation
431
Development of CNC Program for Piston Production
432
Development of CNT/Si3N4 composites with improved mechanical and electrical properties
433
Development of CO2 for polymer foam applications
434
Development of CO2 liquefaction cycles for CO2 sequestration
435
Development of coal combustion pollution control for SO2 and NOx in China
436
Development of Co-alloys for perpendicular magnetic recording media
437
Development of coarse/fine dual stage using pneumatically driven bellows actuator and cylinder with air bearings
438
Development of coated, annular fins for adsorption chillers
439
Development of coatings for automated 96-blade solid phase microextraction-liquid chromatography–tandem mass spectrometry system, capable of extracting a wide polarity range of analytes from biological fluids
440
Development of coatings for fusion power applications
441
Development of coatings for protection in specific high temperature environments
442
Development of coatings to improve RF voltage stand-off
443
Development of cobalt catalysts for the steam reforming of naphthalene as a model compound of tar derived from biomass gasification Original Research Article
444
Development of cobalt–copper nanoparticles as catalysts for higher alcohol synthesis from syngas
445
Development of co-continuous structure in liquid crystalline polyester
446
Development of coconut coir-based lightweight cement board
447
Development of co-current air–water flow in a vertical pipe
448
Development of co-feeding behavior in young wild Japanese macaques (Macaca fuscata)
449
Development of cognitive and motor function following cerebellar tumour injury sustained in early childhood
450
Development of Cognitive Averaging: When Light and Light Make Dark
451
Development of cognitive functions in children with rolandic epilepsy
452
Development of coin-type lithium secondary batteries containing manganese dioxide/Li---Al
453
Development of coin-type lithium-ion rechargeable batteries
454
Development of coir pith/nylon fabric/epoxy hybrid composites: Mechanical and ageing studies
455
Development of coking-resistant Ni-based catalyst for partial oxidation and CO2-reforming of methane to syngas Original Research Article
456
Development of cold neutron depth profiling system at HANARO
457
Development of cold neutron depth profiling system at HANARO
458
Development of cold work tool steel based-MMC coating using HVOF spraying and its HIP densification behaviour
459
Development of cold-formed steel elements for earthquake resistant moment frame buildings
460
Development of collagen condensation method to improve mechanical strength of tissue engineering scaffolds
461
Development of collagenase-resistant collagen and its interaction with adult human dermal fibroblasts
462
Development of collapse sinkholes in areas of groundwater discharge
463
Development of collapsible PET water fountain bottles
464
Development of colloidal gold-based flow-through and lateral-flow immunoassays for the rapid detection of the insecticide carbaryl Original Research Article
465
Development of colloidal gold-based immunochromatographic assay for rapid detection of Streptococcus suis serotype 2
466
Development of colloidal gold-based immunochromatographic assay for rapid detection of Streptococcus suis serotype 2
467
Development of Color Vision Deficiency Assistive System
468
Development of Colorimetric Method for the QuantitativeAnalysis ofAmlodipine Besylate in Dosage Form Using 4-Dimethyleaminobenzaldehydeas Derivatizing Reagent
469
Development of colorimetric receptors for selective discrimination between isomeric dicarboxylate anions
470
Development of coloured glazes for tile applications using Taguchiʹs method
471
Development of combinations of chemically modified vegetable oils as pork backfat substitutes in sausages formulation
472
Development of combined infrared and hot air dryer for vegetables Original Research Article
473
Development of combined microwave-enhanced labelling procedures for maximising deuterium incorporation
474
Development of combustion catalysts for monolith reactors: a consideration of transport limitations Original Research Article
475
Development of commercial nanoporous trace moisture sensor following sol–gel thin film technique
476
Development of Commercially Acceptable Formulations of the Nematophagous FungusVerticillium chlamydosporium
477
Development of Common Data Elements to Provide Tele self-Care Management
478
Development of common indicators of sustainable forest management
479
Development of communication protocols using algebraic and temporal specifications
480
Development of community based curriculum on ophthalmology for under graduate medical course in Bangladesh
481
Development of community nursing: analysis of the central services and practice dilemmas Original Research Article
482
Development of commuter and non-commuter mode choice models for the assessment of new public transport infrastructure projects: A case study
483
Development of compact and efficient hydrogen production module with membrane on catalyst
484
Development of compact cluster ion sources using metal cluster complexes Ionization properties of metal cluster complexes
485
Development of compact fuel processor for 2 kW class residential PEMFCs
486
Development of comparative methods using gas chromatography–mass spectrometry and capillary electrophoresis for determination of endocrine disrupting chemicals in bio-solids
487
Development of compatibilized SBR and EPR nanocomposites containing dual filler system
488
Development of competency inventory for registered nurses in the peopleʹs republic of china: Scale development
489
Development of competitive enzyme-linked immunosorbent assays (ELISAs) based on monoclonal antibodies for chloronicotinoid insecticides imidacloprid and acetamiprid
490
Development of competitive enzyme-linked immunosorbent assays (ELISAs) based on monoclonal antibodies for chloronicotinoid insecticides imidacloprid and acetamiprid Original Research Article
491
Development of competitive enzyme-linked immunosorbent assays for boscalid determination in fruit juices
492
Development of competitive financial intermediation in the context of provision of non-inflationary monetization of economy
493
DEVELOPMENT OF COMPETITIVENESS OF AGRARIAN TRADE IN SELECTED CENTRAL EUROPEAN COUNTRIES
494
Development of complementary diagnostic reagents for BHV-1 marker vaccines formulated with recombinant strains
495
Development of complementary diagnostic reagents for BHV-1 marker vaccines formulated with recombinant strains
496
Development of complementary diagnostic reagents for BHV-1 marker vaccines formulated with recombinant strains
497
Development of complementary diagnostic reagents for BHV-1 marker vaccines formulated with recombinant strains
498
Development of complementary diagnostic reagents for BHV-1 marker vaccines formulated with recombinant strains
499
Development of complementary diagnostic reagents for BHV-1 marker vaccines formulated with recombinant strains
500
Development of complete hydrolysis of pectins from apple pomace
501
Development of composite biscuits supplementing with potato or corn flour
502
Development of composite catalysts made of Cu-Zn-Cr oxide/zeolite for the hydrogenation of carbon dioxide Original Research Article
503
Development of composite materials by mechanochemical treatment of post-consumer plastic waste
504
Development of composite plate for compact silencer design
505
Development of composite spherical bearing
506
Development of composite sustainability performance index for steel industry
507
Development of composite tissue scaffolds containing naturally sourced mircoporous hydroxyapatite
508
Development of composite-metal hybrid bipolar plates for PEM fuel cells
509
Development of composites based on lithium manganese nickel oxide and electroactive polymers
510
Development of composition and study of sorbent properties based on saponite
511
Development of compositionally modulated multilayer Zn–Ni deposits as replacement for cadmium
512
Development of compound semiconductor detectors at ESA
513
Development of compound semiconductor detectors at ESA
514
Development of comprehensive descriptors for multiple linear regression and artificial neural network modeling of retention behaviors of a variety of compounds on different stationary phases
515
Development of Comprehensive Soil Salinity Index
516
Development of compressive strength of cement paste under accelerated curing by using a continuous microwave thermal processor
517
Development of Computational Aeroacoustics Equations for Subsonic Flows Using a Mach Number Expansion Approach
518
Development of computational models to predict the mechanical behavior of Friction Riveting joints
519
Development of computational software for analysis of curved girders under construction loads
520
Development of computational wear simulation of metal-on-metal hip resurfacing replacements
521
Development of Computed Tomography Head and Body Phantom for Organ Dosimetry
522
Development of computer automated decision support system for surface water quality assessment
523
DEVELOPMENT OF COMPUTER PROGRAM FOR DETERMINATION BROODING ENERGY IN BROILER HOUSES
524
Development of computer program for simulation of an ice bank system operation, Part I: Mathematical modelling
525
Development of computer simulation of industrial superplastic sheet forming
526
Development of computer-assisted patient control for use in the hospital setting during mass casualty incidents
527
Development of Computer-Based System for the Temperature Monitoring of a Post-Tensioned Segmental Concrete Box-Girder Bridge
528
Development of computer-based techniques for fluid power systems design
529
Development of computer-generated phantoms for FMRI software evaluation
530
Development of concave-face boudin in Chhotanagpur Granite Gneiss Complex of Jasidih-Deoghar area, eastern India: Insight from finite element modeling
531
Development of concepts concerning the genesis and emplacement of Tethyan ophiolites in the Eastern Mediterranean and Oman regions
532
Development of Concepts of Mathematical Functions: A Quasi-experimental Study of Fourth- and Fifth-Grade Learners in Japan
533
DEVELOPMENT OF CONCEPTUAL DESIGN OF CAR HOUSING SIDE MIRROR USING INTEGRATED APPROACH
534
Development of conceptual design tool for liquid metal cooled-reactors
535
Development of Conceptual Framework to Understand Factors Associated with Return to Work among Cancer Survivors: A Systematic Review
536
Development of conceptual model of construction factory for automated construction
537
Development of concurrent engineering system for design of composite structures
538
Development of conducting high polymer probe
539
Development of conducting polyaniline coating: a novel approach to superior corrosion resistance
540
Development of conducting polychloroprene rubber using imidazolium based ionic liquid modified multi-walled carbon nanotubes
541
Development of conducting polymer sensor arrays for wound monitoring
542
Development of conductive coated polyester film as RPC electrodes using screen printing
543
Development of conductive coated polyester film as RPC electrodes using screen printing
544
Development of conductive coated Polyether ether ketone (PEEK) filament for structural health monitoring of composites
545
Development of conductometric biosensor array for simultaneous determination of maltose, lactose, sucrose and glucose
546
Development of confocal micro X-ray fluorescence instrument using two X-ray beams
547
Development of connections between hybrid steel truss–FRC beams and RC columns for precast earthquake-resistant framed construction
548
Development of consensus about child oppositional behavior: Increased convergence with entry into school
549
Development of constant-power driving control for light-emitting-diode (LED) luminaire
550
Development of constitutive equations for plastic deformation of a porous material using numerical experiments
551
Development of constitutive laws for thermomechanical behaviors of composites containing multi-type ellipsoidal reinforcements
552
Development of constitutive models for dynamic strain aging regime in Austenitic stainless steel 304
553
Development of constitutive models for fast reactor design
554
Development of constitutive relationship model of Ti600 alloy using artificial neural network
555
Development of constitutive relationships for the hot deformation of boron microalloying TiAlCrV alloys
556
Development of constitutive relationships for the hot deformation of boron microalloying TiAlCrV alloys
557
Development of constrained DET for measurements of dissolved iron in surface sediments at sub-mm resolution
558
Development of constrained-genetic-algorithm load-flow method
559
Development of construction materials using sulfite-rich scrubber sludge and fly ash
560
Development of Consultancy skills for future IT professionals via group working
561
Development of Consultation-Liaison Psychiatry in Poland
562
Development of Consumer Protection: Challenges and the Way Forward for Consumer Protection Institution in Malaysia
563
Development of contactless emulsification method using electrostatic phenomena for biological application
564
Development of Continuous Casting Technology of Electrical Steel and New Products Review Article
565
Development of continuous flow type hydrothermal reactor for hemicellulose fraction recovery from corncob
566
DEVELOPMENT OF CONTRACTOR PAYMENT METHOD BASED ON PAVEMENT PERFORMANCE
567
Development of control method and dynamic model for multi-evaporator air conditioners (MEAC)
568
Development of Control Technology for the HTTR Hydrogen Production System
569
Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction
570
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
571
Development of controlled release tablet by optimizing HPMC: Consideration of theoretical release and RSM
572
Development of controlled releasing surfaces by plasma deposited multilayers
573
Development of controlled strength-loss resorbable beta-tricalcium phosphate bioceramic structures
574
Development of convective heat transfer correlations for common designs of solar dryer
575
Development of conventional and quantitative real-time PCR assays for the detection and identification of Rhizoctonia solani AG-3 in potato and soil
576
Development of convergent synthetic method for saccharide-linked ethynylpyridine foldamers by Huisgen reaction
577
Development of conversion coating on mild steel prior to sol gel nanostructured Al2O3 coating for enhancement of corrosion resistance
578
Development of cooking sector in rural areas in India—A review
579
Development of cooperativity in the local segmental dynamics of poly(vinylacetate): synergy of thermodynamics and intermolecular coupling
580
Development of copper coatings on ceramic powder by electroless technique
581
Development of copper impregnated porous granulates for chemical-looping combustion
582
Development of copper matrix composite reinforced with FeAl particles produced by combustion synthesis
583
Development of Copper Rotor of AC Induction Motor
584
Development of copper/zinc oxide-based multicomponent catalysts for methanol synthesis from carbon dioxide and hydrogen Original Research Article
585
Development of copper-charged polypropylene feedspacers for biofouling control
586
Development of copperindiumdisulfide into a solar material
587
Development of copper-mediated allylation of γ-activated-α,β-unsaturated lactam toward peptide mimetic synthesis
588
Development of CORBA-based engineering applications from legacy Fortran programs
589
Development of cordierite-based glass-ceramics by slip casting through selecting the appropriate sintering conditions
590
Development of Core Collection for Perennial Mulberry (Morus spp.) Germplasm
591
Development of core fuel management code system for CANDU reactor based on coupled neutronics and thermal-hydraulic advanced nodal method
592
Development of core seismic analysis models for KNGR fuel assemblies associated with 0.3 g seismic loads Original Research Article
593
Development of core to solve the multidimensional multiple-choice knapsack problem
594
Development of core–shell nano composite of poly (styrene-co-methyl acrylate) and bentonite clay by ultra sonic assisted mini-emulsion polymerization
595
Development of core–shell structure Fe3O4@Ta2O5 microspheres for selective enrichment of phosphopeptides for mass spectrometry analysis
596
Development of CO-resistive catalysts for the one-step amination of dodecyl alcohol to N,N-dimethyldodecylamine, and effect of carbon monoxide on activity of Cu/Ni-based catalysts Original Research Article
597
Development of Coriolis mass flowmeter with digital drive and signal processing technology
598
Development of cork–gypsum composites for building applications
599
Development of corn cob ash blended cement
600
Development of Corn Milk Yoghurt Using Mixed Culture of Lactobacillus delbruekii, Streptococcus salivarus, and Lactobacillus casei
601
Development of corn starch based green composites reinforced with Saccharum spontaneum L fiber and graft copolymers – Evaluation of thermal, physico-chemical and mechanical properties
602
Development of coronal stop perception: Bilingual infants keep pace with their monolingual peers
603
Development of coronary compensatory enlargement in vivo: Sequential assessments with intravascular ultrasound
604
DEVELOPMENT OF CORONARY ORIFICES IS REGULATED BY EPICARDIALLY MEDIATED APOPTOSIS
605
Development of Corporate Bond Market: Regulatory Impact
606
Development of corpus luteum susceptibility to an analog of prostaglandin F2α, throughout the luteal phase in llamas (Lama glama)
607
Development of correction factors for landfill gas emission model suiting Indian condition to predict methane emission from landfills
608
Development of correlation-based clustering method and its application to software sensing
609
Development of correlations for describing solute transfer into acyclic alcohol solvents based on the Abraham model and fragment-specific equation coefficients
610
Development of correlations for Nusselt number and friction factor for solar air heater with roughened duct having arc-shaped wire as artificial roughness
611
Development of Correlations for Pressure Drop in Vertical Helical Tubes with Non-Boiling Two-Phase Air/Water Flow: An Experimental Study
612
Development of Corrosion Resistant Zn-Ni-TiO2 Composite Coatings
613
Development of corrosion-free concrete beam–column joint with adequate seismic energy dissipation
614
Development of corrosion-resistant improved Al-doped austenitic stainless steel
615
Development of corrugation as a result of varying normal load
616
Development of corticospinal tract fibers and their plasticity I: Quantitative analysis of the developing corticospinal tract in mice
617
Development of corticospinal tract fibers and their plasticity II. Neonatal unilateral cortical damage and subsequent development of the corticospinal tract in mice
618
Development of cosmic-ray tracker for KASKA neutrino oscillation experiment
619
Development of cost innovative BPs for a PEMFC stack for a 1 kW-class residential power generator (RPG) system
620
Development of cost-effective strategies for environmental monitoring of irrigated areas in Mediterranean regions: Traditional and new approaches in a changing world
621
Development of Country‑Wide Strategies to Reduce the Alcohol Abuse
622
Development of crack-free welds in a TiAl-based alloy
623
Development of craniofacial structures in transgenic mice with constitutively active PTH/PTHrP receptor
624
Development of Crassostrea gigas Larvae is Affected by 4-nonylphenol
625
Development of creep resistant die cast Mg–Sn–Al–Si alloy
626
Development of creep-resistant iron aluminides
627
Development of crestal normal faults associated with deepwater fold growth
628
Development of Cr-free aluminum phosphate binders and their composite applications
629
Development of critical attitude in fundamentals of professional care discipline: A case study
630
Development of crop water stress index of wheat crop for scheduling irrigation using infrared thermometry
631
Development of cross-hatch grid morphology and its effect on ordering growth of quantum dots
632
Development of cross-linked chitosan films for oral mucosal delivery of lidocaine
633
Development of cross-linked chitosan films for oral mucosal delivery of lidocaine
634
Development of crosslinked plasma-graft filling polymer membranes for the reverse osmosis of organic liquid mixtures
635
Development of crosslinked poly(ether-block-amide) membrane for CO2/CH4 separation
636
Development of cryogenic alpha spectrometers using metallic magnetic calorimeters
637
Development of cryogenic alpha spectrometers using metallic magnetic calorimeters
638
Development of cryogenic detectors for high-resolution particle and radiation detection
639
Development of cryogenic detectors for high-resolution particle and radiation detection
640
Development of cryogenic detectors for radioactivity metrology
641
Development of cryogenic Si detectors by CERN RD39 Collaboration for ultra radiation hardness in SLHC environment
642
Development of cryogenic Si detectors by CERN RD39 Collaboration for ultra radiation hardness in SLHC environment
643
Development of cryogenic thermal detectors for neutrino physics: present status of the experiments in Genoa
644
Development of cryogenic thermal detectors for neutrino physics: present status of the experiments in Genoa
645
Development of cryogenic tracking detectors for very high luminosity experiments
646
Development of cryogenic tracking detectors for very high luminosity experiments
647
Development of cryosorption pump for neutral beam injector
648
Development of crystal morphology during unitaxial growth in a progressively widening vein: I. The numerical model
649
Development of crystal morphology during unitaxial growth in a progressively widening vein: II. Numerical simulations of the evolution of antitaxial fibrous veins
650
Development of crystal texture in R-lean RFeCoNbB (R = Nd, Pr) alloy during melt spinning processes
651
Development of crystalline phases in sintered glass-ceramics from residual E-glass fibres
652
Development of crystallographic-orientation-dependent internal strains around a fatigue-crack tip during overloading and underloading
653
Development of Cs2Te photocathode rf gun system for compact THz SASE-FEL
654
Development of Cs2Te photocathode rf gun system for compact THz SASE-FEL
655
Development of CSR through Ethical Leadership: Constructive Role of Ethical Culture and Intellectual Capital
656
Development of Cu(InGa)Se2-based thin-film PV modules with a Zn(O,S,OH)x buffer layer
657
Development of Cu/ZnO-based high performance catalysts for methanol synthesis by CO2 hydrogenation
658
Development of Cu-based oxygen carriers for chemical-looping combustion
659
Development of Cu-based oxygen carriers for Chemical-Looping with Oxygen Uncoupling (CLOU) process
660
Development of cube-type SOFC stacks using anode-supported tubular cells
661
Development of CuInS2-based solar cells and modules
662
Development of Culex quinquefasciatus resistance to Bacillus sphaericus strain IAB59 needs long term selection pressure
663
Development of Culturally-specific Family Criticism Scale and Emotional Over-involvement Scale
664
Development of culture media containing spent yeast cells of Debaryomyces hansenii and corn steep liquor for lactic acid production with Lactobacillus rhamnosus
665
Development of cultures capable of reducing perchlorate and nitrate in high salt solutions
666
Development of cumulative and availability rate balances in a multi-cylinder turbocharged indirect injection Diesel engine
667
Development of current-based microscopic defect analysis methods and associated optical filling techniques for the investigation on highly irradiated high resistivity silicon detectors
668
Development of curvature during the cure of AS4/8552 [0/90] unsymmetric composite plates
669
Development of Cushingʹs syndrome after use of a herbal remedy
670
Development of custom vector accelerator for high-performance speech coding
671
Development of cutting edge geometries for hard milling operations
672
Development of cutting tools with microscale and nanoscale textures to improve frictional behavior
673
Development of CVD diamond r.f. windows for ECRH
674
Development of CVD Ti-containing films
675
Development of CVD WC–Co coatings
676
Development of CW and short-pulse calorimetric loads for high power millimeter-wave beams
677
Development of CXCR3 antagonists. Part 2: Identification of 2-amino(4-piperidinyl)azoles as potent CXCR3 antagonists
678
Development of CXCR3 antagonists. Part 3: Tropenyl and homotropenyl-piperidine urea derivatives
679
Development of CXCR3 antagonists. Part 4: Discovery of 2-amino-(4-tropinyl)quinolines
680
Development of cyanobacterial blooms in Valencian rice fields
681
Development of Cytisus scoparius L. at stand and individual level in a mid-elevation mountain of the French Massif Central
682
Development of cytochrome P450 2D6-specific LKM-autoantibodies following liver transplantation for Wilsonʹs disease - possible association with a steroid-resistant transplant rejection episode
683
Development of CZTS thin films solar cells by pulsed laser deposition: Influence of pulse repetition rate
684
Development of d.c. power supply for gyrotron with energy recovery system
685
Development of damage state in porous ceramics under compression
686
Development of damage structure in 16Cr–4Al ODS steels during electron-irradiation
687
Development of dark Ti(C,O,N) coatings prepared by reactive sputtering
688
Development of Data Acquisition System using VLSI
689
Development of Data Envelopment Analysis for the Performance Evaluation of Green Supply Chain with Undesirable Outputs
690
Development of Data Envelopment Analysis Model for Financial and Social Evaluation of Companies Based on Stock Returns and Accounting Value
691
Development of data processing software for a new TOF single crystal neutron diffractometer at J-PARC
692
Development of data processing software for a new TOF single crystal neutron diffractometer at J-PARC
693
Development of Data Sheets for Statistical Evaluation of Fatigue Data Original Research Article
694
Development of data-based model-free representation of non-conservative dissipative systems
695
Development of data-driven models for fluidized-bed coal gasification process
696
Development of DA-type polymers with phthalimide derivatives as electron withdrawing units and a promising strategy for the enhancement of photovoltaic properties
697
Development of Day Case Cataract Surgery at Prince Rashid Hospital
698
development of day center in roozbeh hospital: a teamwork experience
699
Development of deburring tool for burrs at intersecting holes
700
Development of deciduous and permanent dentitions in the upper jaw of the house shrew (Suncus murinus)
701
Development of Decision Support Model for Selecting a Maintenance Plan Using a Fuzzy MCDM Approach:A Theoretical Framework
702
DEVELOPMENT OF DECISION SUPPORT SYSTEM FOR SUSTAINABLE COMMUNITY DESIGN
703
DEVELOPMENT OF DECISION SUPPORT SYSTEM FOR SUSTAINABLE COMMUNITY DESIGN
704
Development of decision support systems for bioenergy applications
705
Development of Deep Learning Model for the Recognition of Cracks on Concrete Surfaces
706
Development of deep N-well monolithic active pixel sensors in a CMOS technology
707
Development of deep N-well monolithic active pixel sensors in a CMOS technology
708
Development of defects in the structure of PIN dosimetry diodes exposed to gamma radiation
709
Development of defects in the structure of PIN dosimetry diodes exposed to gamma radiation
710
Development of dehydrogenation catalyst for hydrogen generation in organic chemical hydride method
711
Development of Dendritic Cells and Their Use in Tumor Therapy
712
Development of dense gas dispersion model for emergency preparedness
713
Development of density and mass flow rate measurement technologies for slush hydrogen Original Research Article
714
Development of DEPFET Macropixel detectors
715
Development of DEPFET Macropixel detectors
716
Development of depositional systems in the southeastern Yellow Sea during the postglacial transgression
717
Development of Dermestes maculatus (DeGeer, 1774) (Coleoptera, Dermestidae) on Different Fish Substrates
718
Development of Design and Analysis Tool for Switched Reluctance Drive System
719
Development of Design and Fabrication of a Water-Jet-Guided CO2 Laser Chamber
720
Development of design and manufacturing technology for end mills in machining hardened steel
721
Development of design charts for solar cooling systems. Part I: computer simulation for a solar cooling system and development of solar cooling design charts
722
Development of design charts for solar cooling systems. Part II: Application of the cooling f-chart
723
Development of design charts for stress intensity factors at tips of multi-site cracks in unstiffened curved panels
724
DEVELOPMENT OF DESIGN CRITERIA FOR HIGHLY EFFICIENT BIOLOGICAL TREATMENT OF TEXTILE WASTEWATER
725
DEVELOPMENT OF DESIGN CRITERIA FOR HIGHLY EFFICIENT BIOLOGICAL TREATMENT OF TEXTILE WASTEWATER
726
Development of design Criteria for ITER In-vessel Components
727
Development of design evaluation tools for the JSFR fuel transfer pot
728
Development of design form of reinforced concrete water towers
729
Development of design options for the port plug components of the ITER core CXRS diagnostic
730
Development of design rules in the AISC Design Guide for structural stainless steel
731
Development of detection and monitoring techniques of CO2 leakage from seafloor in sub-seabed CO2 storage
732
Development of detection systems for low-energy heavy ions at DRAGON Original Research Article
733
Development of deterministic code based on the discrete ordinates method for the third-order neutron correlation technique
734
Development of devices for beam divergence correction in the high-resolution NRSE spectrometer
735
Development of devices for beam divergence correction in the high-resolution NRSE spectrometer
736
Development of dextran microparticles loaded with IL-1Ra of high-encapsulation efficiency and high-bioactivity by a novel method without exposing IL-1Ra to water–oil interfaces
737
Development of diagnosis algorithm for the check valve with spectral estimations and neural network models using acoustic signals
738
Development of diagnostic methods and study of the immunoreactivity of a mixture of recombinant core and E2 proteins fused to GST with control serum positive for hepatitis C
739
Development of Diagnostic Methods for Detecting Ganoderma-infected Oil Palms
740
Development of Diagnostics for DNA A and DNA β of a Begomovirus Associated with Mesta Yellow Vein Mosaic Disease and Detection of Geminiviruses in Mesta (Hibiscus cannabinus L. and H. sabdariffa L.) and Some Other Plant Species
741
Development of dialyzer with immobilized glycoconjugate polymers for removal of Shiga-toxin
742
Development of diamond-coated drills and their cutting performance
743
Development of diamond-like carbon fibre wheel
744
Development of diclofenac sodium loaded magnetic nanocarriers of pectin interacted with chitosan for targeted and sustained drug delivery
745
Development of diclofenac sodium-loaded alginate-PVP K 30 microbeads using central composite design
746
DEVELOPMENT OF DIET JAM FROM APPLE GROWN IN SWAT (NWFP)
747
Development of different human skin colors: A review highlighting photobiological and photobiophysical aspects
748
Development of different temoporfin-loaded invasomes—novel nanocarriers of temoporfin: Characterization, stability and in vitro skin penetration studies
749
Development of different types of pull-apart microstructures in mylonites: an experimental investigation
750
Development of diffuse reflectance infrared Fourier transform spectroscopy for the rapid characterization of aerosols
751
Development of Digital Competence of Portable Telemedicine Complex Operators for Optimizing the Provision of Medical Care
752
Development of Digital Electronics Book Trainer
753
Development of digital gas metal arc welding system
754
Development of digital-based comprehensive accounting exam
755
Development of Digital-Based Learning Multimedia to Improve Students Skills in Childbirth
756
Development of dimeric modulators for anti-apoptotic Bcl-2 proteins
757
Development of dinitrophenylated cyclodextrin derivatives for enhanced enantiomeric separations by high-performance liquid chromatography
758
Development of Diomus austrinus Gordon (Coleoptera: Coccinellidae) on two mealybug prey species at five constant temperatures
759
Development of dioxin toxicity evaluation method in human milk by enzyme-linked immunosorbent assay––assay validation for human milk
760
Development of dip-strip sucrose sensors: Application of plant invertase immobilized in chitosan–guar gum, gelatin and poly-acrylamide films
761
Development of DIRC counters for the PANDA experiment at FAIR
762
Development of DIRC counters for the PANDA experiment at FAIR
763
Development of direct competitive enzyme-linked aptamer assay for determination of dopamine in serum Original Research Article
764
Development of direct compression entecavir 0.5 mg-loaded tablet exhibiting enhanced content uniformity
765
Development of direct fluorination technology for application to materials for lithium battery
766
Development of direct methanol alkaline fuel cells using anion exchange membranes
767
Development of direct resistive heating method for SO3 decomposition in the S–I cycle for hydrogen production
768
Development of direct size-exclusion chromatography separation for the determination of molar mass of native procyanidins in the phenolate form
769
Development of directionally solidified γ-TiAl structures
770
Development of Directly Suspended Droplet Micro Extraction Method for Extraction of Organochlorine Pesticides in Water Samples
771
Development of Disaster Awareness Scale: A Validity and Reliability Study
772
Development of discrete cracks in concrete loaded by shock waves
773
Development of discrete flow paths in unsaturated fractures at Yucca Mountain
774
Development of discrete ordinates code supporting unstructured tetrahedral mesh and applied in neutronics analysis for the Korea Helium Cooled Ceramic Reflector Test Blanket Module
775
Development of discrimination SNP markers for Hanwoo (Korean native cattle)
776
Development of disc-type intermediate-temperature solid oxide fuel cell
777
Development of disk ultramicroelectrodes based on low melting or softening point metal fibers by low temperature plasma enhanced chemical vapor deposition Original Research Article
778
Development of disomic single-locus DNA microsatellite markers for Persian sturgeon (Acipenser persicus) of the Caspian Sea
779
Development of dispersed-type sonophotocatalytic process using piezoelectric effect caused by ultrasonic resonance
780
Development of dispersed-type sonophotocatalytic process using piezoelectric effect caused by ultrasonic resonance
781
Development of dispersive liquid–liquid microextraction combined with gas chromatography–mass spectrometry as a simple, rapid and highly sensitive method for the determination of phthalate esters in water samples
782
Development of Dispersive Liquid-Liquid Microextraction Procedure for Trace Determination of Malathion Pesticide in Urine Samples
783
Development of disposable bulk-modified screen-printed electrode based on bismuth oxide for stripping chronopotentiometric analysis of lead (II) and cadmium (II) in soil and water samples Original Research Article
784
DEVELOPMENT OF DISPOSABLE HYDROPHILIC AND ANTIBACTERIAL POLYPROPYLENE NONWOVEN SHEET
785
Development of disposable low density screen-printed electrode arrays for simultaneous electrochemical measurements of the hybridisation reaction
786
Development of Dissolution Test Method for Drotaverine Hydrochloride/Mefenamic Acid Combination Using Derivative Spectrophotometry
787
Development of distributed real-time simulators based on CORBA
788
Development of Disulfide Peptide Mapping and Determination of Disulfide Structure of Recombinant Human Osteoprotegerin Chimera Produced in Escherichia coli
789
Development of divertor pumping system with superpermeable membrane
790
Development of divertor tungsten coatings for the JET ITER-like wall
791
Development of DNA markers for discrimination between domestic and imported beef
792
Development of DNA vaccines against pasteurellosis in Japanese flounder, Paralichthys olivaceus
793
Development of DNA vaccines for fish: vector design, intramuscular injection and antigen expression using viral haemorrhagic septicaemia virus genes as model
794
Development of docetaxel-loaded folate-modified Poly(lactic-co-glycolic acid) particles
795
Development of Domestic Cat Embryo Produced by Preserved Sperms
796
Development of dominant bile duct stenoses in patients with primary sclerosing cholangitis treated with ursodeoxycholic acid: outcome after endoscopic treatment
797
Development of domperidone bilayered matrix type transdermal patches: physicochemical, in vitro and ex vivo characterization
798
Development of donor–acceptor modified DNA hairpins for the investigation of charge hopping kinetics in DNA
799
Development of doped graphites for plasma-facing components
800
Development of Dorman Waqf Properties: Application of Traditional and Contemporary Modes of Financing
801
Development of DOTA-Rituximab to be Labeled with 90Y for Radioimmunotherapy of B-cell Non-Hodgkin Lymphoma
802
Development of double-scattering-type Compton camera with double-sided silicon strip detectors and NaI(Tl) scintillation detector
803
Development of double-scattering-type Compton camera with double-sided silicon strip detectors and NaI(Tl) scintillation detector
804
Development of double-sided silicon strip detectors (DSSD) for a Compton telescope
805
Development of double-sided silicon strip detectors (DSSD) for a Compton telescope
806
Development of double-stage ADR for future space missions Original Research Article
807
Development of Dpa-based imidazole zinc anion receptors
808
Development of DRAIN–WARMF model to simulate flow and nitrogen transport in a tile-drained agricultural watershed in Eastern Canada
809
development of dribbling and shooting exercise models in futsal sports development study of pok futsal achievement training in sebelas maret university
810
Development of dried tube specimens for Xpert MTB/RIF proficiency testing
811
Development of Drill Geometry for Burr Minimization In Drilling
812
Development of Drilling Mud Solution for Drilling in Hard Rocks
813
Development of driving cycles for motorcycles and light-duty vehicles in Vietnam
814
Development of Driving Fatigue Strain Index for Reducing Accident Risk Among Drivers
815
Development of dry fermented sausages rich in docosahexaenoic acid with oil from the microalgae Schizochytrium sp.: Influence on nutritional properties, sensorial quality and oxidation stability
816
Development of dry polymer electrolyte based on polyethylene oxide with co-bridging agent crosslinked by electron beam
817
Development of dry powder inhaler containing tadalafilloaded PLGA nanoparticles
818
Development of dry reforming catalysts at elevated pressure: D-optimal vs. full factorial design
819
Development of Dual Control Allotopic Expression System for Subunit 8 of Yeast Saccharomyces cerevisiae Mitochondrial ATP Synthase
820
Development of dual fish multi-metric indices of biological condition for streams with characteristic thermal gradients and low species richness
821
Development of Dual Fuel Single Cylinder Natural Gas Engine an Analysis and Experimental Investigation for Performance and Emission
822
Development of dual gradient column in liquid chromatography
823
Development of dual layer of ZIF-8/PEBAX-2533 mixed matrix membrane for CO2 capture
824
Development of Dual Nutrient Diagnosis Ratios for Basswood, American Beech, and White Ash.
825
Development of dual purpose greenhouse coupled with north wall utilization for higher economic gains
826
Development of dual scale scaffolds via direct polymer melt deposition and electrospinning for applications in tissue regeneration
827
Development of dual sulfur oxides and oxygen solid state sensor for “in situ” measurements
828
Development of Dual TaqMan Based One-Step rRT-PCR Assay Panel for Rapid and Accurate Diagnostic Test of MERS-CoV: A Novel Human Coronavirus, Ahead of Hajj Pilgrimage
829
Development of dual-acting agents for thromboxane receptor antagonism and thromboxane synthase inhibition. 2. Design, synthesis, and evaluation of a novel series of phenyl oxazole derivatives
830
Development of Ductile Truss System Using Double Small Buckling-Restrained Braces: Analytical Study
831
Development of ductopaenic liver allograft rejection includes a “hepatitic” phase prior to duct loss
832
Development of duplex nitrided and closed field unbalanced magnetron sputter ion plated CrTiAlN-based coatings for H13 aluminium extrusion dies
833
Development of durable and efficient electrodes for large-scale alkaline water electrolysis
834
Development of durable antimicrobial surfaces containing silver- and zinc-ion–exchanged zeolites
835
Development of durable copper catalyst for hydrogen production by high temperature methanol steam reforming
836
Development of Dy3+ activated K2MgP2O7 pyrophosphate phosphor for energy saving lamp
837
Development of Dynamic Capabilities of Education Service Policy Processes in Jembrana, Bali
838
Development of dynamic headspace-liquid phase microextraction method performed in a home-made extraction vessel for extraction and preconcentration of 1,4-dioxane from shampoo
839
Development of dynamic impact factor for performance evaluation of existing multi-girder concrete bridges
840
Development of dynamic recrystallization maps based on the initial grain size
841
Development of dynamic recrystallization theory
842
Development of dynamic recrystallization theory
843
Development of dynamic recrystallization theory
844
Development of Dynamic Simple Shear Apparatus for Small Strain Dynamic Tests on Unsaturated Granular Soils by Bender Element and Ultrasonic Sensors
845
Development of Early Infection Structures of Puccinia recondita f. sp. tritici in Non-host Cereal Species
846
Development of Early Porcine Embryos In Vitro and In Vivo
847
Development of easily accessible ruthenium-based catalysts for metathesis polymerization using 4-X-pyridines as ancillary ligands
848
Development of east Asian summer monsoon environments in the late Miocene: radiolarian evidence from Site 1143 of ODP Leg 184
849
Development of easy made low cost bindless monolithic electrodes from biomass with controlled properties to be used as electrochemical capacitors
850
Development of EC 135 turbulence models via system identification
851
Development of EC H&CD launcher components for fusion device
852
Development of ECG beat segmentation method by combining lowpass filter and irregular R–R interval checkup strategy
853
Development of eco-efficiency indicators for the Canadian food and beverage industry
854
Development of eco-efficient micro-porous membranes via electrospinning and annealing of poly (lactic acid)
855
Development of eco-friendly binder using metakaolin-fly ash–lime-anhydrous gypsum
856
Development of Ecofriendly Snail Shell Particulate-Reinforced Recycled Waste Plastic Composites for Automobile Application
857
Development of eco-friendly submicron emulsions stabilized by a bio-derived gum
858
Development of ecofriendly/biodegradable lubricants: An overview
859
Development of eco-industrial estates in Thailand: initiatives in the northern region community-based eco-industrial estate
860
Development of Ecological Agricultural Production and Its Latest Global Trends before the Economic Crisis
861
Development of ecological economics in Australia and New Zealand
862
Development of ecological indicators—a methodological framework using compromise programming
863
Development of Eco-Park in flood prone areas using green technologies
864
Development of ecoregion-based height–diameter models for 3 economically important tree species of southern Turkey
865
Development of eddies in an idealised shelf slope area due to an along slope barotropic jet
866
Development of edge state on graphite surface induced by Ar+ irradiation studied using near-edge X-ray absorption fine structure spectroscopy
867
Development of edgeless n-on-p planar pixel sensors for future ATLAS upgrades
868
Development of edgeless n-on-p planar pixel sensors for future ATLAS upgrades
869
Development of edgeless silicon pixel sensors on p-type substrate for the ATLAS high-luminosity upgrade
870
Development of edgeless silicon pixel sensors on p-type substrate for the ATLAS high-luminosity upgrade
871
Development of edible films based on differently processed Atlantic halibut (Hippoglossus hippoglossus) skin gelatin
872
Development of education policy in Lithuania during the years of transformations
873
Development of educational CD-ROMs in astronomy: Information on a collaborative project Original Research Article
874
Development of educational image databases and e-books for medical physics training
875
Development of educational material for families with FH
876
Development of educational software for beam loading analysis using pen-based user interfaces
877
Development of Effective Analysis of a High Gain Triad Input Dual Output DC-DC Converter for Microgrid Application
878
Development of effective and safe lentiviral vectors for the treatment of X-linked severe combined immunodeficiency
879
Development of effective hydrogen sulphide removing equipment using Thiobacillus sp.IW
880
Development of effective Lewis acids for the catalytic Diels–Alder reaction of α,β-unsaturated lactones with cyclopentadiene
881
Development of effective nanobiocatalytic systems through the immobilization of hydrolases on functionalized carbon-based nanomaterials
882
Development of efficiency-enhanced cogeneration system utilizing high-temperature exhaust-gas from a regenerative thermal oxidizer for waste volatile-organic-compound gases
883
Development of efficient amine-modified mesoporous silica SBA-15 for CO2 capture
884
Development of efficient and cost-effective distributed hydrological modeling tool MWEasyDHM based on open-source MapWindow GIS
885
DEVELOPMENT OF EFFICIENT AND OPTIMIZED PROTOCOL FOR RAPID MICROPROPAGATION OF Physalis ixocarpa, A MEDICINAL HERB
886
Development of efficient digestion procedures for quantitative determination of cobalt and molybdenum catalyst residues in carbon nanotubes
887
Development of Efficient Finite Element Software of Crack Propagation Simulation using Adaptive Mesh Strategy
888
Development of efficient identification scheme for nonlinear dynamic systems using swarm intelligence techniques
889
Development of efficient new methodology for generation, cyclization and functional trapping of iminyl and amidyl radicals
890
Development of efficient photoreactors for solar hydrogen production
891
Development of efficient production routes based on strip casting for advanced high strength steels for crash-relevant parts
892
Development of efficient solution-processed red phosphorescent organic light-emitting diodes using carrier transport materials
893
Development of efficient switched network and mixed-mode simulators
894
Development of efficient system for ethanol production from paper sludge pretreated by ball milling and phosphoric acid
895
Development of efficient system for ethanol production from paper sludge pretreated by ball milling and phosphoric acid
896
Development of EFL Learners’ Referential and Expressive Writing Performance: Task-based Instruction vs. Project-based Instruction
897
Development of EFL Teachers’ Engagement and Professional Identity: The Effect of Discussing Teacher Competences via E- Collaborative Discussion Forum
898
Development of Egg Shell Powder Solution as Ecofriendly Reagent: for Chemical Treatment of Natural Fibers for Polymer Composites Production
899
Development of eggs and larvae of Emmelichthys nitidus (Percoidei: Emmelichthyidae) in south-eastern Australia, including a temperature-dependent egg incubation model
900
Development of eight-node quadrilateral membrane elements using the area coordinates method
901
Development of elastic damage load theorem for damage detection in a statically determinate beam
902
Development of elastic force model for wheel/rail contact problems
903
Development of elasto-plastic material models in a natural coordinate system Original Research Article
904
Development of electric vehicles use in China: A study from the perspective of life-cycle energy consumption and greenhouse gas emissions
905
Development of electrical conductivity with minimum possible percolation threshold in multi-wall carbon nanotube/polystyrene composites Original Research Article
906
Development of electrical efficiency measurement techniques for 10 kW-class SOFC system: Part I. Measurement of electrical efficiency
907
Development of electrical efficiency measurement techniques for 10 kW-class SOFC system: Part II. Uncertainty estimation
908
Development of electrical insulator coatings for fusion power applications
909
Development of electrical properties in lead-free bismuth sodium lanthanum titanate–barium titanate ceramic near the morphotropic phase boundary
910
Development of electrically conductive plasma sprayed coatings on glass ceramic substrates
911
Development of electrically conductive zirconia Part1: The optimal process parameters and mechanical properties
912
Development of electrically controlled polishing with dispersion type ER fluid under AC electric field
913
Development of electrically insulating coatings for service in a lithium environment
914
Development of electrically insulating coatings on vanadium alloys for lithium-cooled blankets*
915
Development of electrocatalysts for solid alkaline fuel cell (SAFC)
916
Development of electrochemical aptasensor based on gold nanorod and its application for detection of aflatoxin B1 in rice and blood serum sample
917
Development of electrochemical biosensor with nano-interface for xanthine sensing – A novel approach for fish freshness estimation
918
Development of electrochemical cell with layered composite of the Gd-doped ceria/electronic conductor system for generation of H2–CO fuel through oxidation–reduction of CH4–CO2 mixed gases
919
Development of electrochemical cells based on (PEO + NaYF4) and (PEO + KYF4) polymer electrolytes
920
Development of electrochemical cells based on (PEO + NaYF4) and (PEO + KYF4) polymer electrolytes
921
Development of electrochemical DNA biosensor based on gold nanoparticle modified electrode by electroless deposition
922
Development of electrochemical method for the determination of olaquindox using multi-walled carbon nanotubes modified glassy carbon electrode
923
Development of electrochemical reporter assay using HeLa cells transfected with vector plasmids encoding various responsive elements Original Research Article
924
Development of electrochemical sensor based on carbon paste electrode modified with ZnO nanoparticles for determination of chlorpheniramine maleate
925
Development of electrochemical sensor based on β-cyclodextrin/K10 montmorillonite towards the enhanced electro-catalytic oxidation of isoorientin: A voltammetric study
926
Development of electrochemical sensors for nano scale Tb(III) ion determination based on pendant macrocyclic ligands Original Research Article
927
Development of electrochromic evacuated advanced glazing
928
Development of electro-co-deposited Ni–TiC nano-particle reinforced nanocomposite coatings
929
Development of electrode structure and analysis of electrode pore distributions in phosphoric acid fuel cells
930
Development of electrodeposited nanostructural poly (o-aminophenol) coating as a solid phase microextraction fiber for determination of bisphenol A
931
Development of electrodeposited WO3 films with modified surface morphology and improved electrochromic properties
932
Development of electrodeposited ZnTe layers as window materials in ZnTe/CdTe/CdHgTe multi-layer solar cells
933
Development of electrohydrodynamic sprays related to space charge effects
934
Development of electrokinetic-flushing technology for the remediation of contaminated soil around nuclear facilities
935
Development of electroless NiP–PTFE–SiC composite coating
936
Development of electroless Ni–Zn–P/nano-TiO2 composite coatings and their properties
937
Development of electrolyte solution concentration measurement system and application in solar pond
938
Development of electrolytic reactor for processing of gaseous tritiated compounds
939
Development of electromagnetic shielding materials from the conductive blends of polyaniline and polyaniline-clay nanocomposite-EVA: Preparation and properties
940
Development of electron phase microscopes
941
Development of electron phase microscopes
942
Development of Electron Tracking Compton Camera using micro pixel gas chamber for medical imaging
943
Development of Electron Tracking Compton Camera using micro pixel gas chamber for medical imaging
944
Development of Electronic Resources across Networks in Thailand
945
Development of electronic structure of Ni thin films on Cu(0 0 1) surfaces
946
Development of electroplated Ni–xZn films for under bump metallization application
947
Development of electrospun poly(vinyl alcohol) fibers immobilizing lipase highly activated by alkyl-silicate for flow-through reactors
948
Development of electrospun PVdF–PAN membrane-based polymer electrolytes for lithium batteries
949
Development of electrostatic paper separation and feed mechanism
950
Development of Electrostatic Particulate Collection System for Agricultural Biomass Based Energy Applications
951
Development of electrostatic pressure-swirl nozzle for agricultural applications
952
DEVELOPMENT OF ELEMENTARY SCIENCE AND MATHEMATICS TEACHERS’ COMPETENCE IN MEASUREMENT AND EVALUATION SCALE
953
Development of elevated temperature structural design guide for Japanese demonstration breeder reactor Original Research Article
954
Development of ELISA Systems for Measurement of Human Tumor Necrosis Factor-Alpha (TNF-α)
955
Development of ELISA test for determination of the level of antibodies against Rhodococcus equi in equine serum and colostrum
956
Development of ELISA test for determination of the level of antibodies against Rhodococcus equi in equine serum and colostrum
957
Development of ELISAs for the measurement of IgM and IgG subclasses in sera from llamas (Lama glama) and assessment of the humoral immune response against different antigens
958
Development of ELISAs for the measurement of IgM and IgG subclasses in sera from llamas (Lama glama) and assessment of the humoral immune response against different antigens
959
Development of Em18-immunoblot and Em18-ELISA for specific diagnosis of alveolar echinococcosis
960
Development of embryos after in vitro fertilization of bovine oocytes with sperm from either yaks (Bos grunniens) or cattle (Bos taurus)
961
Development of embryos produced by intracytoplasmic sperm injection of cat oocytes
962
Development of Emergency Medicine as Academic and Distinct Clinical Discipline in Bosnia & Herzegovina
963
Development of Emergency Medicine in Lebanon
964
Development of emission factors and emission inventories for motorcycles and light duty vehicles in the urban region in Vietnam Original Research Article
965
Development of emission orientated production control strategies using Fuzzy Expert Systems, Neural Networks and Neuro-Fuzzy approaches
966
Development of emissions predictor equations for a light-duty diesel engine using biodiesel fuel properties
967
Development of Emotional Skills through Interdisciplinary Practices Integrated into a University Curriculum
968
Development of empirical correlations for non-adiabatic capillary tube based on mechanistic model
969
Development of empirical equations for fretting-corrosion failure-time of tin-plated contacts
970
Development of empirical equations for prediction of modulus of elasticity for monodisperse metallic foams
971
Development of Empirical Formula for Computing Sediment Loads in Al-Meshkab Regulator Channel
972
Development of empirical model for different process parameters during rotary electrical discharge machining of copper–steel (EN-8) system
973
Development of empirical models with high accuracy for estimation of drag coefficient of flow around a smooth sphere: An evolutionary approach
974
Development of empirical potentials for sodium borosilicate glass systems
975
Development of Empirical Prediction Formula for Penetration of Ogive Nose Hard Missile into Concrete Targets
976
Development of empirical relation to evaluate the heat transfer coefficients and fractional energy in basin type hybrid (PV/T) active solar still Original Research Article
977
Development of empirical standard weight equation for Pursak chub Squalius pursakensis, an endemic cyprinid species of Northwest Anatolia
978
Development of empirically based burning rate sub-models for a natural gas engine
979
Development of emulator for walk-through metal detectors
980
Development of Emulsification containing Natural Colorant from Local Plant (Roselle)
981
Development of emulsion track expansion techniques for optical-microscopy-observation of low-velocity ion tracks with ranges beyond optical resolution limit
982
Development of emulsion track expansion techniques for optical-microscopy-observation of low-velocity ion tracks with ranges beyond optical resolution limit
983
Development of emulsions from biomass pyrolysis liquid and diesel and their use in engines—Part 1 : emulsion production
984
Development of emulsions from biomass pyrolysis liquid and diesel and their use in engines—Part 2: tests in diesel engines
985
Development of encapsulation technique for curcumin loaded O/W emulsion using chitosan based cryotropic gelation
986
Development of Encarsia bimaculata (Heraty and Polaszek) (Hymenoptera: Aphelinidae) in Bemisia tabaci (Gennadius) (Homoptera: Aleyrodidae) nymphs
987
Development of energy and time parameters in the walking of healthy human infants
988
DEVELOPMENT OF ENERGY BENCHMARKING OF MALAYSIAN GOVERNMENT HOSPITALS AND ANALYSIS OF ENERGY SAVINGS OPPORTUNITIES
989
DEVELOPMENT OF ENERGY CONSERVATION PROGRAMS FORRESIDENTIAL AND SMALL COMMERCIAL BUILDINGS IN THAILAND
990
Development of energy efficiency and management implementation in the Turkish industrial sector
991
Development of energy efficiency improvement in the Tunisian hotel sector: a case study
992
Development of Energy Efficient Clustering Protocol in Wireless Sensor Network Using Neuro-Fuzzy Approach
993
Development of energy labels for room air conditioner in Malaysia: methodology and results
994
Development of energy loss formula for distribution systems using FCN algorithm and cluster-wise fuzzy regression
995
Development of energy management system – Case study of Serbian car manufacturer
996
Development of energy model based on total daily irradiation and maximum ambient temperature
997
Development of energy performance benchmarks and building energy ratings for non-domestic buildings: An example for Irish primary schools
998
Development of energy saving technology for flue gas carbon dioxide recovery in power plant by chemical absorption method and steam system
999
Development of energy-efficient passive solar building design in Nicosia Cyprus
1000
Development of energy-efficient products: Models, methods and IT support
