بر اساس عنوان

1
Improved solubility of β-cyclodextrin inclusion complexes by using liquid ammonia as a solvent and the possibility of asymmetric reduction
2
Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization
3
Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization
4
Improved solubilization of pyromellitic dianhydride and 4,4′-oxydianiline in ionic liquid by the addition of zwitterion and their polycondensation
5
Improved solution stability and spinnability of concentrated polyaniline solutions using N,N′-dimethyl propylene urea as the spin bath solvent
6
Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy. Part I. Characterisation of constituent particles and overheating
7
Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy. Part II. Microstructure and mechanical properties
8
Improved solutions for the Chinese postman problem on mixed networks
9
Improved solutions for the traveling purchaser problem
10
Improved solutions to the Steiner triple covering problem
11
Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part I – Ionic liquids
12
Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part II – Molecular solvent properties
13
Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part III–Bunsen reaction in molecular solvents
14
Improved solvent-free microwave extraction of essential oil from dried Cuminum cyminum L. and Zanthoxylum bungeanum Maxim.
15
Improved Sonogashira CC coupling through clay supported palladium complexes with tridentate pincer bis-carbene ligands
16
Improved sonographic visualization by fluid challenge method of renal lithiasis in the nondilated collecting system experience in seven cases
17
Improved sonolytic hydrolysis of peptides in aqueous solution with addition of 1,4-benzenedithiol
18
Improved sonolytic hydrolysis of peptides in aqueous solution with addition of 1,4-benzenedithiol
19
Improved sooting tendency measurements for aromatic hydrocarbons and their implications for naphthalene formation pathways
20
Improved space borne detection of volcanic ash for real-time monitoring using 3-Band method
21
Improved space–time forecasting of next day ozone concentrations in the eastern US
22
Improved spark and ember detection using stationary wavelet transforms
23
Improved spatial memory, neurobehavioral outcomes, and neuroprotective effect after progesterone administration in ovariectomized rats with traumatic brain injury: Role of RU486 progesterone receptor antagonist
24
Improved spatial modeling by merging multiple secondary data for intrinsic collocated cokriging
25
Improved spatial resolution by MOSFET dosimetry of an x-ray microbeam
26
Improved Specificity and False Discovery Rates for Multiplex Analysis of Changes in Strain-Specific Anti-Influenza IgG
27
Improved Specificity of Myoglobin Plus Carbonic Anhydrase Assay Versus That of Creatine Kinase-MB for Early Diagnosis of Acute Myocardial Infarction, , ,
28
Improved Specificity of Transesophageal Dobutamine Stress Echocardiography Compared to Standard Tests for Evaluation of Coronary Artery Disease in Women Presenting With Chest Pain
29
Improved spectral performance of random PWM schemes with weighted switching decision
30
Improved spectral quality for 3D MR spectroscopic imaging using a high spatial resolution acquisition strategy
31
Improved spectral relaxation methods for binary quadratic optimization problems
32
Improved spectrometric characteristics of thallium bromide nuclear radiation detectors
33
Improved spectrometric characteristics of thallium bromide nuclear radiation detectors
34
Improved spectrophotometric determination of paraquat in drinking waters exploiting a Multisyringe liquid core waveguide system
35
Improved spectroscopic constants for I2 D 1Σu+
36
Improved speech recognition using a subspace projection approach
37
Improved speed and stability of st-segment recovery with reduced-dose tenecteplase and eptifibatide compared with full-dose tenecteplase for acute st-segment elevation myocardial infarction Original Research Article
38
Improved speed estimation in sensorless PM brushless AC drives
39
Improved speed of hydrogen detection by Schottky diodes on InP with electrophoretically deposited Pt nanoparticles and graphite contacts
40
Improved SPH methods for simulating free surface flows of viscous fluids
41
Improved SPICE electrical model of silicon photomultipliers
42
Improved SPICE electrical model of silicon photomultipliers
43
Improved Spice models of aluminum electrolytic capacitors for inverter applications
44
Improved spinel-containing refractory castables for slagging gasifiers
45
Improved spiral disk assembly for high-speed counter-current chromatography
46
Improved spiral tube assembly for high-speed counter-current chromatography
47
Improved spread spectrum: a new modulation technique for robust watermarking
48
Improved sputter depth resolution in Auger thin film analysis using in situ low angle cross-sections
49
Improved square properties of IDEA
50
Improved SRAM Failure Diagnosis for Process Monitoring via Current Signature Analysis
51
Improved SRAM Failure Diagnosis for Process Monitoring via Current Signature Analysis
52
Improved stabilisation method for networked control systems
53
Improved Stabilities of Immobilized Glucoamylase on Functionalized Mesoporous Silica Synthesized using Decane as Swelling Agent
54
Improved stability analysis and gain-scheduled controller synthesis for parameter-dependent systems
55
Improved stability and altered selectivity of tyrosinase based graphite electrodes for detection of phenolic compounds Original Research Article
56
Improved stability and controlled release of ω3/ω6 polyunsaturated fatty acids by spring dextrin encapsulation
57
Improved stability and performance of aerobic granules under stepwise increased selection pressure
58
Improved stability criteria and controller design for linear neutral systems
59
Improved stability criteria for neutral type Lur’e systems with time-varying delays
60
Improved stability criteria for time-varying delayed T–S fuzzy systems via delay partitioning approach
61
Improved stability criteria for uncertain neutral-type Lur׳e systems with time-varying delays
62
Improved stability criterion and its applications in delayed controller design for discrete-time systems
63
Improved stability in N-alkylated organic semiconductors for thin film transistors: Synthesis and characterization of N,N′-dialkylated dihydrodiazapentacene derivatives
64
Improved stability of contact resistance of low melting point alloy incorporated isotropically conductive adhesives
65
Improved stability of halohydrin dehalogenase from Agrobacterium radiobacter AD1 by replacement of cysteine residues
66
Improved stability of La0.5Sr0.5FeO3 by Ta-doping for oxygen separation membrane application
67
Improved stability of liposome in oil/water emulsion by association of amphiphilic polymer with liposome and its effect on bioactive skin permeation
68
Improved stability of OLEDs with mild oxygen plasma treated PEDOT:PSS
69
Improved stability of organic field-effect transistor performance in oligothiophenes including β-isomers
70
Improved stability of quasi-solid-state dye-sensitized solar cell based on poly (ethylene oxide)–poly (vinylidene fluoride) polymer-blend electrolytes
71
Improved stability of solution processed photovoltaic devices using PQT-12
72
Improved stability of the carbon nanotubes–enzyme bioconjugates by biomimetic silicification
73
Improved stability of urease upon coupling to alkylamine and arylamine glass and its analytical use
74
Improved stability of volume resistivity in carbon black/ethylene-vinyl acetate copolymer composites by employing multi-walled carbon nanotubes as second filler
75
Improved stability quasi-solid-state dye-sensitized solar cell based on polyether framework gel electrolytes
76
Improved stabilization method for networked control systems with variable transmission delays and packet dropout
77
Improved stabilization of microencapsulated Cathepsin B in harsh conditions
78
Improved Stage Categorization of PTZ-Induced Kindling and Late Enhanced Neurogenesis in PTZ Kindled Mice
79
Improved staging of breast cancer through lymphatic mapping and sentinel node biopsy
80
Improved Stall Delay Model for HAWT Performance Predictions using 3D Navier-Stokes Solver and Actuator Disk Method
81
Improved starch recovery from potatoes by enzymes and reduced water holding of the residual fibres
82
Improved starting methods for two-step Runge–Kutta methods of stage-order image Original Research Article
83
Improved start-up scenario for single-stage electronic ballast
84
Improved state estimations of lower trophic ecosystems in the global ocean based on a Green’s function approach
85
Improved statistical inference for the two-parameter Birnbaum–Saunders distribution
86
Improved statistical inference for the two-parameter Birnbaum–Saunders distribution
87
Improved statistical methods applied to surface chemistry in minerals flotation
88
Improved statistical models for limited datasets in uncertainty quantification using stochastic collocation
89
Improved Statistically Optimal Nearfield Acoustical Holography in subsonically moving fluid medium
90
Improved steered response power method for sound source localization based on principal eigenvector
91
Improved Steffensen type bounds on expectations of record statistics
92
Improved stereospecific synthesis of the trans-isomers of dicyclohexano-18-crown-6 and the solid-state structure of the trans–syn–trans-isomer
93
Improved sternal closure using steel bands: Early experience with three-year follow-up
94
Improved sternal osteosynthesis using any sternal retractor
95
Improved stiffness distribution factors for evaluation of effective buckling lengths in multi-story sway frames
96
Improved stochastic competitive Hopfield network for polygonal approximation
97
Improved stochastic linearization method using mixed distributions
98
Improved stochastic optimization algorithms for adaptive optics Original Research Article
99
Improved stochastic resonance algorithm for enhancement of signal-to-noise ratio of high-performance liquid chromatographic signal Original Research Article
100
Improved Storage Stability of Pearl Millet Flour Through Microwave Treatment
101
Improved stoves in India: A study of sustainable business models
102
Improved stoves in Sub-Saharan Africa: the case of the Sudan
103
Improved strain sensing performance of glass fiber polymer composites with embedded pre-stretched polyvinyl alcohol–carbon nanotube fibers Original Research Article
104
Improved strategies for dynamic load balancing
105
Improved Strategy for a Constant Daily Light Integral in Greenhouses
106
Improved streamflow forecasting using self-organizing radial basis function artificial neural networks
107
Improved streamlines and time-of-flight for streamline simulation on irregular grids
108
Improved strength and ductility of magnesium alloy below micro-twin lamellar structure
109
Improved strength and reduced permeability of stabilized peat: Focus on application of kaolin as a pozzolanic additive
110
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns
111
Improved strength and toughness of polyketone composites using extremely small amount of polyamide 6 grafted graphene oxides
112
Improved Strength Model for Interior Flat Plate–Column Connections Subject to Unbalanced Moment
113
Improved strength of boron-doped Sn-1.0Ag-0.5Cu solder joints under aging conditions
114
Improved strength of early versus late supraspinatus tendon repair: a study in the rabbit
115
Improved strength of Ni and Zn-doped Sn–2.0Ag–0.5Cu lead-free solder alloys under controlled processing parameters
116
Improved strength-impairing contact damage resistance of Ti3Si(Al)C2/SiC composites
117
Improved stress intensity factors for a single corner crack at a loaded fastener hole
118
Improved stress intensity factors for selected configurations in cracked plates
119
Improved stresses for the 4-node tetrahedral element
120
Improved Structural Characterizations of the drkN SH3 Domain Unfolded State Suggest a Compact Ensemble with Native-like and Non-native Structure
121
Improved Structural Order, Stability, and Anion-Exchange Capacity of Cation-Mediated Bridged Hybrid Mesoscopic Materials by Using Chelating Ligands
122
Improved structural/morphological durability for organic solar cells based on poly(3-hexylthiophene) fibers photoactive layers
123
Improved Structure Design of a Single Phase Multilevel Inverter with ‎the Aim of Reducing Switching Devices ‎
124
Improved structure-adaptive anisotropic filter
125
Improved structure–property relationship models for prediction of critical properties
126
Improved Structures of Maximally Decimated Directional Filter Banks for Spatial Image Analysis
127
Improved Subcontractor Selection Employing Partnering Principles
128
Improved subgrid scale model for dense turbulent solid-liquid two-phase flows
129
Improved suboptimal Bang–Bang control of aseismic buildings with variable friction dampers
130
Improved Subspace-Based Single-Channel Speech Enhancement Using Generalized Super-Gaussian Priors
131
Improved substructuring method for eigensolutions of large-scale structures
132
Improved Sufficient Conditions for Monotonic PiecewiseRational Quartic Interpolation
133
Improved Suffix Tree Clustering for Efficient Document Clustering
134
Improved sulfur nutrition provides the basis for enhanced production of sulfur-containing defense compounds in Arabidopsis thaliana upon inoculation with Alternaria brassicicola
135
Improved superovulatory response in beef cattle following ovarian follicular ablation using a simplified transvaginal device
136
Improved superposition schemes for approximate multi-caloron configurations Original Research Article
137
Improved support concept for the Helias reactor coil system
138
Improved support vector classification using PCA and ICA feature space modification
139
Improved support vector clustering
140
Improved support vector clustering
141
Improved support vector machine regression in multi-step-ahead prediction for rock displacement surrounding a tunnel
142
Improved suppression of recurrent atrial fibrillation with dual-site right atrial pacing and antiarrhythmic drug therapy
143
Improved surface bounds based on derivatives
144
Improved surface morphology of flow-modulated MOVPE grown AIN on sapphire using thin medium-temperature AIN buffer layer
145
Improved surface photovoltaic response of nanoparticulate TiO2-pyridine derivative monolayer/n-Si(111) assembly
146
Improved surface properties of D2 steel by laser surface alloying
147
Improved surface property of PVDF membrane with amphiphilic zwitterionic copolymer as membrane additive
148
Improved surface proton conduction of yttrium-stabilized zirconia via acidic modifications
149
Improved surface roughness as a result of free-form surface machining using self-organized neural network
150
Improved surface sensing of DNA on gas-etched porous silicon
151
Improved surface stability and biotin binding properties of streptavidin coating on polystyrene
152
Improved surface treatment of the superconducting TESLA cavities
153
Improved surface treatment of the superconducting TESLA cavities
154
Improved surface-enhanced Raman scattering on electrochemically roughened silver substrates prepared in bielectrolyte solutions Original Research Article
155
Improved surface-enhanced Raman scattering on optimum electrochemically roughened silver substrates Original Research Article
156
Improved surgical field for composite arterial grafts
157
Improved surgical mesh integration into the rat abdominal wall with arginine administration
158
Improved Surgical Outcome for Chronic Severe Aortic Regurgitation With Severely Depressed Left Ventricular Systolic Function
159
Improved survivability analysis for SONET SHRs
160
Improved Survival After Cardiac Arrest Using Emergent Autopriming Percutaneous Cardiopulmonary Support
161
Improved survival after resection of colorectal liver metastases
162
Improved Survival and Decreasing Incidence of Adverse Events With the HeartMate II Left Ventricular Assist Device as Bridge-to-Transplant Therapy
163
Improved Survival and Hematopoietic Differentiation of Murine Embryonic Stem Cells on Electrospun Polycaprolactone Nanofiber
164
Improved survival and local control after total mesorectal excision or D3 lymphadenectomy in the treatment of primary rectal cancer: an international analysis of 1411 patients
165
Improved survival benefits with radiofrequency ablation for liver cancer
166
Improved survival following induction of GVHD following lipopolysaccharide immunization
167
Improved survival in cancer of the colon and rectum in Sweden
168
Improved Survival in Fontan-Associated Protein-Losing Enteropathy
169
Improved survival in patients with locally advanced prostate cancer treated with radiotherapy and goserelin, 337, M Bolla, D Gonzalez, P Warde, JB Dubois, RO Mirimanoff, G Storme, J Bernier, A Kuten, C Sternberg, T Gil, L Colette, M Pierart (Eds.), in: N
170
Improved survival in patients with nonischemic advanced heart failure and syncope treated with an implantable cardioverter-defibrillator
171
Improved survival in stage III non-small cell lung cancer: seven-year follow-up of cancer and leukemia group B (CALGB) 8433 trial: Dillman RO, Herndon J, Seagren SL. Eaton WL, Green MR J Natl Cancer Inst 1996;88:1210-5
172
Improved survival in young women with breast cancer
173
Improved survival of infants with omphalocele
174
Improved survival of Korean patients with idiopathic pulmonary arterial hypertension after the introduction of targeted therapies
175
Improved survival of patients with acute myocardial infarction with significant left ventricular dysfunction undergoing invasive coronary procedures
176
Improved Survival of Patients With End-Stage Heart Failure Listed for Heart Transplantation: Analysis of Organ Procurement and Transplantation Network/U.S. United Network of Organ Sharing Data, 1990 to 2005 Original Research Article
177
Improved survival rates support left ventricular assist device implantation early after myocardial infarction
178
Improved Survival With Multiple Left-Sided Bilateral Internal Thoracic Artery Grafts
179
Improved survival with plasma exchange in patients with thrombotic thrombocytopenic purpura-hemolytic uremic syndrome
180
Improved survival with plasma exchange in patients with thrombotic thrombocytopenic purpura-hemolytic uremic syndrome
181
Improved survival with preoperative chemotherapy followed by resection uncompromised by tumor response for advanced squamous cell carcinoma of the Head and Neck
182
Improved survival with preoperative radiotherapy in resectable rectal cancer: Swedish Rectal Cancer Trial N engl J Med 1997; 336: 980–987
183
Improved survival with VATS pleurectomy-decortication in advanced malignant mesothelioma
184
Improved symbiotic organisms search algorithm for solving unconstrained function optimization
185
Improved Symmetric Switched-Inductor/Capacitor Quasi Z-Source Inverter with Ability Uplifted-Boost
186
Improved symmetrical component-based fault distance estimation for digital distance protection
187
Improved syntheses and applicability of different DOTA building blocks for multiply derivatized scaffolds Original Research Article
188
Improved syntheses of [image] and [image]: Structural characterization of Na[Cp∗MoO3] · 5H2O and [image]
189
Improved syntheses of bis(ethynyl)-para-carboranes, 1,12-(RCtriple bond; length of mdashC)2-1,12-C2B10H10 and 1,10-(RCtriple bond; length of mdashC)2-1,10-C2B8H8 (R = H or Me3Si)
190
Improved syntheses of meso-tetraarylbenziporphyrins and observations of substituent effects on the diatropic characteristics of these formally nonaromatic carbaporphyrinoids
191
Improved syntheses of methyl (14E)- and (14Z)-dehydrocrepenynate: key intermediates in plant and fungal polyacetylene biosynthesis
192
Improved syntheses of poly(oxy-1,3-phenylenecarbonyl-1,4-phenylene) and related poly(ether–ketones) using polyphosphoric acid/P2O5 as polymerization medium
193
Improved syntheses of precursors for PET radioligands [18F]XTRA and [18F]AZAN
194
Improved syntheses of α-BOC-aminoketones from α-BOC-amino-Weinreb amides using a pre-deprotonation protocol
195
Improved synthesis and characterisation of a hydrazide derivative of diethylenetriaminepentaacetic acid for site-specific labelling of monoclonal antibodies with 111In
196
Improved synthesis and characterization of 1,3,4,6-tetra-O-acetyl-2-(N-acetylacetamido)-2-deoxy-β-d-glucopyranose
197
Improved synthesis and characterization of the copper Lyonsite-type compound Cu4−xMo3O12
198
Improved synthesis and crystal structure of tetrakis(acetonitrile)(η4-1,5-cyclooctadiene)ruthenium(II) bis[tetrafluoroborate(1−)]
199
Improved Synthesis and Crystal Structure of TiC1(3)(tmeda)(thf): A Highly Stereoselective Pinacol Coupling Reagent for Aromatic Aldehydes
200
Improved synthesis and evaluation of 17-substituted aminoalkylgeldanamycin derivatives applicable to drug delivery systems
201
Improved synthesis and hydrogen storage of a microporous metal–organic framework material
202
Improved synthesis and in vitro characterization of chitosan–thioethylamidine conjugate
203
Improved synthesis and in vitro/in vivo activities of natural product-inspired, artificial glutamate analogs Original Research Article
204
Improved synthesis and preparative scale resolution of racemic monastrol
205
Improved synthesis and radiolabeling of [11C]MP4A, a suitable ligand for the investigation of the cholinergic system using PET
206
Improved synthesis and X-ray crystal structure of pentafluorophenylcobalt tricarbonyl triphenylphosphine
207
Improved synthesis methods of standards used for quantitative determination of total isothiocyanates from broccoli in human urine
208
Improved synthesis of (2S,5S)-5-tert-butylproline
209
Improved synthesis of (4-ethenylphenyl)diphenyl methanol and its application in the preparation of trityl functionalized polystyrene resin containing tetrahydrofuran derived cross-linker
210
Improved synthesis of (9Z)-9,13-tetradecadien-11-ynal, the sex pheromone of the avocado seed moth, Stenoma catenifer
211
Improved synthesis of (R)-7-hydroxycarvone from (S)-α-pinene
212
Improved synthesis of (R)-glycine-d-15N
213
Improved synthesis of (S)-7-amino-5H,7H-dibenzo[b,d]azepin-6-one, a building block for γ-secretase inhibitors
214
Improved synthesis of 1,3-diolein by Novozym 435-mediated esterification of monoolein with oleic acid
215
Improved synthesis of 1,4-dideoxy-1,4-imino-d-galactitol, an inhibitor of E. coli K12 UDP-Gal mutase and mycobacterial galactan biosynthesis
216
Improved synthesis of 1,5-dinaphtho[38]crown-10
217
Improved synthesis of 2,2′-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives catalyzed by urea under ultrasound
218
Improved synthesis of 2,2′-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives catalyzed by urea under ultrasound
219
Improved synthesis of 2,2′-dimethoxy-1,1′-binaphthyl-3,3′-diacetic acid derivatives
220
Improved synthesis of 2,3:4,6-di-O-isopropylidene-d-glucopyranose and -d-galactopyranose
221
Improved synthesis of 2′-amino-2′-deoxyguanosine and its phosphoramidite Original Research Article
222
Improved synthesis of 3-(dialkylaminomethyl)-indole in acetic acid aqueous solution under ultrasound irradiation
223
Improved synthesis of 3-(dialkylaminomethyl)-indole in acetic acid aqueous solution under ultrasound irradiation
224
Improved synthesis of 3-aryl isoxazoles containing fused aromatic rings
225
Improved synthesis of 3-methoxy-4-hydroxymandelic acid by glyoxalic acid method
226
Improved synthesis of 4,4′-diamino-2,2′-bipyridine from 4,4′-dinitro-2,2′-bipyridine-N,N′-dioxide
227
Improved synthesis of 4-amino-7-nitrobenz-2,1,3-oxadiazoles using NBD fluoride (NBD-F)
228
Improved synthesis of 4-phenylphenalenones: the case of isoanigorufone and structural analogs
229
Improved synthesis of 6-amino-6-deoxy-d-galactono-1,6-lactam and d-mannono-1,6-lactam from corresponding unprotected d-hexono-1,4-lactones
230
Improved synthesis of 9-(2,3-dideoxy-2-fluoro-β-d-threo-pentofuranosyl)adenine (FddA) using triethylamine trihydrofluoride
231
Improved synthesis of a [4.4]-spirolactam β-turn mimetic as surrogate of the didemnin side chain dipeptide Pro-N-Me-d-Leu
232
Improved synthesis of a C3-symmetrical pyridinophane
233
Improved synthesis of a fluorogenic ceramidase substrate Original Research Article
234
Improved synthesis of an aldobiouronic acid related to hardwood xylans, and preparation of a derivative thereof suitable for linking to proteins
235
Improved synthesis of anti-[18F]FACBC: improved preparation of labeling precursor and automated radiosynthesis
236
Improved synthesis of antibacterial 3-substituted 6-anilinouracils
237
Improved synthesis of C8–C20 segment of pectenotoxin-2
238
Improved synthesis of carbon nanotubes with junctions and of single-walled carbon nanotubes
239
Improved synthesis of cellulose carbamates without by-products
240
Improved synthesis of chalcones under ultrasound irradiation
241
Improved synthesis of chalcones under ultrasound irradiation
242
Improved synthesis of chalconoid-like compounds under ultrasound irradiation
243
Improved synthesis of chalconoid-like compounds under ultrasound irradiation
244
Improved synthesis of d,l-fluorocitric acid
245
Improved synthesis of d-allothreonine derivatives from l-threonine
246
Improved synthesis of daunomycin conjugates with triplex-forming oligonucleotides. The polypurine tract of HIV-1 as a target Original Research Article
247
Improved synthesis of DCDHF fluorophores with maleimide functional groups
248
Improved synthesis of di- and trinuclear iron carbonyl complexes containing bridging diphenylethenyl ligand.: X-ray structure of [PPh4][Fe2(CO)6(μ-CO)(μ-PhCCHPh)]
249
Improved synthesis of dicyclohexylidene protected quebrachitol and its use in the synthesis of l-chiro-inositol derivatives
250
Improved synthesis of diethyl 2,6-dimethyl-4-aryl-4H-pyran-3,5-dicarboxylate under ultrasound irradiation
251
Improved synthesis of diethyl 2,6-dimethyl-4-aryl-4H-pyran-3,5-dicarboxylate under ultrasound irradiation
252
Improved synthesis of diethyl ferrocenylphosphonate, crystal structure of (FcPO3Et2)2 · ZnCl2, and electrochemistry of ferrocenylphosphonates, FcP(O)(OR)2, FcCH2P(O)(OR)2, 1,1′-fc[P(O)(OR)2]2 and [FcP(O)(OEt)2]2 · ZnCl2 (Fc = (η5C5H5)Fe(η5C5H4), fc = (η5C
253
Improved synthesis of disaccharides with Escherichia coli β-galactosidase using bio-solvents derived from glycerol
254
Improved synthesis of fullerynes by Fisher esterification for modular and efficient construction of fullerene polymers with high fullerene functionality
255
Improved synthesis of functionalized 5,6-dihydro-pyrimido[4,5-b][1,4]oxazepines
256
Improved synthesis of functionalized mesogenic 2,6-bisbenzimidazolylpyridine ligands
257
Improved synthesis of functionalized molecular platforms related to marine cyclopeptides
258
Improved synthesis of glycosylamines and a straightforward preparation of N-acylglycosylamines as carbohydrate-based detergents
259
Improved synthesis of histone deacetylase inhibitors (HDIs) (MS-275 and CI-994) and inhibitory effects of HDIs alone or in combination with RAMBAs or retinoids on growth of human LNCaP prostate cancer cells and tumor xenografts Original Research Article
260
Improved synthesis of HN(SPPh2)(SePPh2) and some coordination chemistry of [N(SPPh2)(SePPh2)]−
261
Improved synthesis of monodentate and bidentate 2- and 3-pyridylphosphines
262
Improved synthesis of monohydroxytriphenylenes (MHTs)—important precursors to discotic liquid crystal families
263
Improved synthesis of N1-substituted orotic acid derivatives
264
Improved synthesis of N-alkyl substituted dithieno[3,2-b:2′,3′-d]pyrroles
265
Improved synthesis of no-carrier-added p-[124I]iodo-l-phenylalanine and p-[131I]iodo-l-phenylalanine for nuclear medicine applications in malignant gliomas
266
Improved synthesis of oligonucleoside methylphosphonate analogs
267
Improved synthesis of oligonucleotides containing 2-thiouridine derivatives by use of diluted iodine solution
268
Improved synthesis of perfluorooctylpropyl amine
269
Improved synthesis of per-O-acetylated C1 hydroxyglycopyranose and structural study as non-covalent organic framework
270
Improved synthesis of phenylethylamine derivatives by Negishi cross-coupling reactions
271
Improved synthesis of pincer ligand precursor, and synthesis and structural characterization of terphenyl scaffolded S–C–S palladium pincer complex
272
Improved Synthesis of Prostanoids on a Non-Cross-Linked Polystyrene Soluble Support
273
Improved synthesis of pure [18F]fluoro-compounds for PET studies from bromo-compounds
274
Improved synthesis of pyridyl–biaryl ring systems via benzidine rearrangements
275
Improved synthesis of pyrylium salts leading to 2,4-disubstituted diarylfurans via novel mechanism
276
Improved Synthesis of Quinacridine Derivatives
277
Improved synthesis of quinine alkaloids with the Teoc protective group
278
Improved synthesis of substituted pyrido[2,3-d]pyrimidinediones
279
Improved synthesis of sucrose fatty acid monoesters under ultrasonic irradiation
280
Improved synthesis of sucrose fatty acid monoesters under ultrasonic irradiation
281
Improved synthesis of the bifunctional chelating agent 1,4,7,10-tetraaza-N-(1-carboxy-3-(4-nitrophenyl)propyl)-N′,N″,N‴-tris(acetic acid)cyclododecane (PA-DOTA) Original Research Article
282
Improved synthesis of the heteronuclear phosphido Mo–W complex CO4Moμ-PMe22WCO4 and its use as MOCVD precursor
283
Improved synthesis of the hypoxia probe 5-deutero-5-fluoro-5-deoxy-azomycin arabinoside (FAZA) as a model process for tritium radiolabeling
284
Improved synthesis of the iodine-free thyromimetic GC-1
285
Improved synthesis of the peripheral benzodiazepine receptor ligand [11C]DPA-713 using [11C]methyl triflate
286
Improved synthesis of the polyhydroxylated central part of phoslactomycin B
287
Improved synthesis of the radical source bis[2,2,6,6-tetramethylpiperidyl-(1)]-disulfide and photoinduced reactions with M2(CO)10 (M=Mn, Re)
288
Improved Synthesis of Three Brominated Analogues of the Potent Environmental Mutagen 3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX)
289
Improved synthesis of trans-4-alkylcyclohexane carboxylic acids
290
Improved synthesis of UDP-2-(2-ketopropyl)galactose and a first synthesis of UDP-2-(2-ketopropyl)glucose for the site-specific linking of biomolecules via modified glycan residues using glycosyltransferases
291
Improved Synthesis of Vasicinone
292
Improved synthesis of V-PYRRO/NO, a liver-selective nitric oxide prodrug, and analogues
293
Improved synthesis, characterization and catalytic application of [H(OEt2)2][B{C6H3(m-CF3)2}4]
294
Improved synthesis, characterization and catalytic application of [H(OEt2)2][B{C6H3(m-CF3)2}4]
295
Improved Synthetic Approaches Toward 2′-O-Methyl-Adenosine and Guanosine and Their N-Acyl Derivatives
296
Improved synthetic method for preparing spiro α-chloroepoxides
297
Improved synthetic pathway for the derivatization of huprine scaffold
298
Improved synthetic routes to rhodium bipyridine complexes: Comparison of microwave vs. conventional synthesis
299
Improved system AGC performance with arc furnace steel mill loads
300
Improved system buckling analysis of effective lengths of girder and tower members in steel cable-stayed bridges
301
Improved System for Constructing Bacterial cDNA Libraries From the Venom Glands of Two Iranian Scorpions
302
improved system for constructing bacterial cdna libraries from the venom glands of two iranian scorpions
303
Improved system identification with Renormalization Group
304
Improved systolic function after PTCA can be estimated by femoral arterial Doppler
305
Improved T1-weighted dynamic contrast-enhanced MRI to probe microvascularity and heterogeneity of human glioma
306
Improved T2* assessment in liver iron overload by magnetic resonance imaging
307
Improved Tabu search heuristics for the dynamic space allocation problem
308
Improved Taguchi method based contract capacity optimization for industrial consumer with self-owned generating units
309
Improved Takagi–Sugeno fuzzy model-based control of flexible joint robot via Hybrid-Taguchi genetic algorithm
310
Improved Takagi–Sugeno fuzzy model-based control of flexible joint robot via Hybrid-Taguchi genetic algorithm
311
Improved target system for production of high purity [18F]fluorine via the 18O(p,n)18F reaction
312
Improved targeting of 5-[125I/131I]iodo-2′-deoxyuridine to rat hepatoma by using lipiodol emulsion
313
Improved targeting of 5-[125I/131I]iodo-2′-deoxyuridine to rat hepatoma by using lipiodol emulsion
314
Improved Teaching Learning Based Optimization (ITLBO) Algorithm For Solving Optimal Reactive Power Dispatch Problem
315
Improved teaching learning based optimization for global function optimization
316
Improved teaching–learning-based and JAYA optimization algorithms for solving flexible flow shop scheduling problems
317
Improved technical characteristics of the MI-8/17 in the army of FYR Macedonia
318
Improved technique for immunoelectron microscopy. How to prepare epoxy resin to obtain approximately the same immunogold labeling for epoxy sections as for acrylic sections without any etching
319
Improved technique for isolating RNA from tobacco tissues
320
Improved technique for the routine determination of tritiated water in aqueous samples Original Research Article
321
Improved Technique to Diagnose a Patent Foramen Ovale During Left Ventricular Assist Device Insertion
322
IMPROVED TECHNIQUE TO MEASURE TIME-AND SPACE-RESOLVED HEAT TRANSFER UNDER SINGLE BUBBLES DURING SATURATED POOL BOILING OF FC-72
323
Improved techniques for dual-bitstream MPEG video streaming with VCR functionalities
324
Improved Techniques for Factoring Univariate Polynomials
325
Improved techniques for freezing stallion semen as assessed by post-thaw parameters
326
Improved techniques for hybrid method in fast-transient stability assessment
327
IMPROVED TECHNIQUES FOR LABORATORY REARING OF THE SPINY BOLLWORM, Earias insulana (BOISDUVAL) (LEPIDOPTERA: NOCTUIDAE)
328
Improved techniques for size–frequency distribution analysis in the planetary sciences: Application to blocks on 25143 Itokawa
329
Improved techniques for stable isotope analyses of microlitre quantities of water from fluid inclusions in halite and concentrated brines
330
Improved techniques for the measurement of phase error in waveguide based optical devices
331
Improved technology for manufacture of carbon electrodes
332
Improved technology scoring model for credit guarantee fund
333
Improved temperature and corrosion behaviour of nanocomposite Nd2(Fe,Co,M)14B/ALPHA-Fe magnets
334
Improved temperature control of a PWR nuclear reactor using an LQG/LTR based controller
335
Improved temperature precision in rotational coherent anti-Stokes Raman spectroscopy with a modeless dye laser
336
Improved temporal clustering analysis method applied to whole-brain data in acupuncture fMRI study
337
Improved temporal resolution in process-based modelling of agricultural soil ammonia emissions
338
Improved tensile ductility of amorphous Fe78Si9B13 alloy using electrodeposited nano-Ni layers
339
Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface Original Research Article
340
Improved tensile strength of glycerol-plasticized gluten bioplastic containing hydrophobic liquids
341
Improved tensor-trick algorithm: application to helium trimer Original Research Article
342
Improved test statistics for multivariate regression
343
IMPROVED TESTABILITY METHOD FOR MESHCONNECTED VLSI MULTIPROCESSORS
344
Improved the efficiency of small molecule organic solar cell by double anode buffer layers
345
Improved the emulsion stability of phosvitin from hen egg yolk against different pH by the covalent attachment with dextran
346
Improved the slow digestion property of maize starch using partially β-amylolysis
347
Improved the thermal and mechanical properties of poly(butylene succinate-co-butylene adipate) by forming nanocomposites with attapulgite
348
Improved the-law-of-cosines-based fast search method for vector quantization by updating angular information
349
Improved theoretical calculations of InN in its X3Σ− ground state and in the first 3Π excited state
350
Improved theoretical solutions for adhesive lap joint
351
Improved theory for calculating sap flow with the heat pulse method
352
Improved therapy and outcome for patients with acute myocardial infarction — Data of the Berlin Myocardial Infarction Registry from 1999 to 2004
353
Improved therapy for children with acute lymphoblastic leukemia
354
IMPROVED THERMAL ABLATION EFFICACY USING MAGNETIC NANOPARTICLES: A STUDY IN TUMOR PHANTOMS
355
Improved thermal and electrochemical performances of PMMA modified PE separator skeleton prepared via dopamine-initiated ATRP for lithium ion batteries
356
Improved thermal building management with the aid of integrated dynamic HVAC simulation
357
Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites Original Research Article
358
Improved thermal conductivity of epoxy composites using a hybrid multi-walled carbon nanotube/micro-SiC filler Original Research Article
359
Improved thermal expansion and electrochemical performances of Ba0.6Sr0.4Co0.9Nb0.1O3−δ–Gd0.1Ce0.9O1.95 composite cathodes for IT-SOFCs
360
Improved thermal fractionation technique for chain structure analysis of ethylene/α-olefin copolymers
361
Improved thermal interface property of carbon nanotube–Cu composite based on supercritical fluid deposition
362
Improved thermal model and its application in UV high-power pulsed laser ablation of metal target
363
Improved thermal resistance of spherical BaMgAl10O17:Eu blue phosphor prepared by spray pyrolysis
364
Improved thermal shock performance of Al2O3–C refractories due to nanoscaled additives
365
Improved thermal stability and hole mobilities in a strained-Si/strained-Si1−yGey/strained-Si heterostructure grown on a relaxed Si1−xGex buffer
366
Improved thermal stability in organic FET fabricated with a soluble BTBT derivative
367
Improved thermal stability of bulk heterojunctions based on side-chain functionalized poly(3-alkylthiophene) copolymers and PCBM
368
Improved thermal stability of cobalt silicide formed by ion beam assisted deposition on polysilicon
369
Improved thermal stability of crosslinked PTFE using fluorine gas treatment
370
Improved thermal stability of ferromagnetic tunnel junctions with a CoFe/CoFeO/sub x//CoFe pinned layer
371
Improved thermal stability of lipase in W/O microemulsion by temperature-sensitive polymers
372
Improved Thermal Stability of NiSi Nanolayer in Ni-Si Co-sputtered Structure
373
Improved Thermal Stability of Organically Modified TLayered Silicates
374
Improved thermal stability of poly(vinyl chloride) by nanoscale layered double hydroxide particles grafted with toluene-2,4-di-isocyanate
375
Improved thermal stability of ultrathin silicon oxynitride layer due to nitrogen incorporation at the interface
376
Improved thermal stability of whey protein–maltodextrin conjugates at pH 5.0 by d-Glucose, sucrose, d-cellobiose, and lactose
377
Improved thermal stability, properties, and electrocatalytic activity of sol-gel silica modified carbon supported Pt catalysts
378
Improved thermally stimulated current techniques and quenching polarization of polypropylene
379
Improved thermochemical data for computation of phase and chemical equilibria in flue-gas/water systems
380
Improved thermodynamic calculations for concentrated mixed electrolyte systems including ion pairing (or the absence of it)
381
Improved Thermodynamic Model for Aqueous NaCl Solutions from 350 to 400 °C
382
Improved thermodynamic property fields of LiBr–H2O solution
383
Improved thermodynamic stability of subtilisin Carlsberg by covalent modification
384
Improved thermoelectric properties in directionally grown Bi2Sr2Co1.8Oy ceramics by Pb for Bi substitution
385
Improved thermoelectrically cooled X/γ-ray detectors and electronics
386
Improved thermoelectrically cooled X/γ-ray detectors and electronics
387
Improved thermo-mechanical processing for effective grain refinement of high-strength AA 7050 Al alloy
388
Improved thermostability and the optimum temperature of Rhizopus arrhizus lipase by directed evolution
389
Improved Thin-Tube Models for Slender Vortex Simulations
390
Improved thiophene solution selectivity by Cu2+, Pb2+ and Mn2+ ions in pervaporative poly[bis(p-methyl phenyl) phosphazene]desulfurization membrane
391
Improved thiosulfate leaching of a refractory gold concentrate calcine with additives
392
Improved Three-Phase High-Quality Rectifier With Line-Commutated Switches
393
Improved three-phase load flow using phase and sequence components
394
Improved Three-Phase Power-Flow Methods Using Sequence Components
395
Improved thrombogenicity on oxygen etched Ti6Al4V surfaces
396
Improved tibial cutting accuracy in knee arthroplasty
397
Improved time-zero biomechanical properties using poly-L-lactic acid graft augmentation in a cadaveric rotator cuff repair model
398
IMPROVED TIRE WET TRACTION THROUGH THE USE OF MINERAL FILLERS
399
IMPROVED TIRE WET TRACTION THROUGH THE USE OF MINERAL FILLERS
400
Improved Ti-silicate umbite membranes for the separation of H2
401
Improved titanium method for determination of atmospheric H2O2
402
Improved TLBO and JAYA algorithms to solve new fuzzy flexible job-shop scheduling problems
403
Improved tokamak concept focusing on easy maintenance
404
Improved tolerance of maize (Zea mays L.) to heavy metals by colonization of a dark septate endophyte (DSE) Exophiala pisciphila Original Research Article
405
Improved tolerance of Pd/Cu-treated metal hydride alloys towards air impurities
406
Improved tolerance of recombinant Escherichia coli to the toxicity of crude glycerol by overexpressing trehalose biosynthetic genes (otsBA) for the production of β-carotene
407
Improved tolerance to bile salts of aggregated Bifidobacterium longum produced during continuous culture with immobilized cells
408
Improved tolerance to salt and water stress in Drosophila melanogaster cells conferred by late embryogenesis abundant protein
409
Improved tool design for fine blanking through the application of numerical modeling techniques
410
Improved tool wear properties in sheet metal forming using Carbide Steel, a novel abrasion resistant cast material
411
Improved topographic mapping through high-resolution SAR interferometry with atmospheric effect removal
412
Improved torque performance of switched reluctance Machines by reducing the mutual saturation effect
413
Improved torque roll axis decoupling axiom for a powertrain mounting system in the presence of a compliant base
414
Improved total conductivity of nanometric samaria-doped ceria powders sintered with molten LiNO3 additive
415
Improved total least squares estimators for modal analysis
416
Improved total synthesis of (±)-trans-dihydronarciclasine, devised for large-scale preparation
417
Improved toughness and ductility in ferrite/acicular ferrite dual-phase steel through intercritical heat treatment
418
Improved trace gas flux estimation through IRGA sampling optimization
419
Improved track-etch neutron radiography using CR-39
420
Improved track-etch neutron radiography using CR-39
421
Improved tracking of hip rotation using a patella marker
422
Improved transfer of chemical-vapor-deposited graphene through modification of intermolecular interactions and solubility of poly(methylmethacrylate) layers
423
Improved transformed deviance statistic for testing a logistic regression model
424
Improved transformed statistics for the test of independence in contingency tables
425
Improved transient performance of nonlinear adaptive backstepping using estimator resetting based on multiple models
426
Improved Transient Simulation of Salient-Pole Synchronous Generators with Internal and Ground Faults in the Stator Winding
427
Improved transient water wave technique for the experimental estimation of ship responses
428
Improved transmission conditions for a one-dimensional domain decomposition method applied to the solution of the Helmholtz equation
429
Improved Transmission of High-Strength Concrete Column Loads through Normal Strength Concrete Slabs
430
Improved transparency–nonlinearity trade-off with boroxine-based octupolar molecules
431
Improved Transport Equations Including Correlations for Electron–Phonon Systems: Comparison with Exact Solutions in One Dimension
432
IMPROVED TRANSVERSE SHEAR STRESSES IN COMPOSITE FINITE ELEMENTS BASED ON FIRST ORDER SHEAR DEFORMATION THEORY
433
Improved TRAP-silver staining versus conventional radioactive TRAP assays: quantification of telomerase activity during immortalization and in pathological human endometrium
434
IMPROVED TREATMENT APPROACHES FOR TRACE ANALYSIS OF URANIUM an‎d THORIUM USING ULTRASENSITIVE ICP-MS TECHNIQUE
435
Improved treatment of acrylamide co- and terpolymers for water control in gas-producing and storage wells
436
Improved treatment of coronary heart disease by implementation of a Cardiac Hospitalization Atherosclerosis Management Program (CHAMP)
437
Improved treatment of intersecting bodies with the chimera method and validation with a simple and fast flow solver
438
Improved treatment of loop diagrams in SU(3) baryon chiral perturbation theory
439
Improved treatment of momentum at classically forbidden electronic transitions in trajectory surface hopping calculations
440
Improved treatment of source terms in TVD scheme for shallow water equations
441
Improved treatment of visceral leishmaniasis (kala-azar) by using combination of ketoconazole, miltefosine with an immunomodulator—Picroliv
442
Improved trial methods for a class of generalized Bernoulli problems
443
Improved tribological properties of TiC with porous nanostructured TiO2 intermediate layer
444
Improved truncation error bounds for limit periodic continued fractions with additional assumptions on its elements
445
Improved tuberculosis infection control practices in Maryland acute care hospitals
446
Improved tungsten moderator structures for slow positron beams
447
Improved Turbine Engine Hierarchical Modeling and Simulation Based on Engine Fuel Control System
448
Improved Two-Factor Authenticated Key Exchange Protocol
449
Improved two-step anodization technique for ordered porous anodic aluminum membranes
450
Improved two-temperature model including electron density of states effects for Au during femtosecond laser pulses
451
Improved ultra-low range sidelobe pulse compression waveform design
452
Improved ultrasonic cleaning of membranes with tandem frequency excitation
453
Improved ultrasonic extraction procedure for the determination of polycyclic aromatic hydrocarbons in sediments
454
Improved ultraviolet/visible rejection ratio using MgZnO/SiO2/n-Si heterojunction photodetectors
455
Improved uncertainty for a modified commercial emissometer
456
Improved unconventional reservoir characterization using multi-azimuth stratigraphic inversion, case study on the Fort Worth Basin
457
Improved undecidability results on weighted timed automata
458
Improved underground heat exchanger by using no-dig method for space heating and cooling
459
Improved Understanding of Bimodal Coupled Bridge Flutter Based on Closed-Form Solutions
460
Improved understanding of in-situ polymerization of zinc dimethacrylate: The solid bulk polymerization
461
Improved understanding of mixed oil in Nigeria based on pyrolysis of asphaltenes
462
Improved understanding of petroleum migration history in the Hongche fault zone, northwestern Junggar Basin (northwest China): Constrained by vein-calcite fluid inclusions and trace elements
463
Improved understanding of the effect of electrical double layer on pressure-driven flow in microchannels Original Research Article
464
Improved understanding of the petroleum systems of the Niger Delta Basin, Nigeria
465
Improved unitarity bounds for B0 → π+ℓ−vℓ decays Original Research Article
466
Improved unitarized Heavy Baryon Chiral Perturbation Theory for πN scattering
467
Improved Univariate Microaggregation for Integer Values
468
Improved upper and lower bounds on a geometric Ramsey problem
469
Improved upper and lower bounds on the feedback vertex numbers of grids and butterflies Original Research Article
470
Improved Upper Bound On The Energy Dissipation Rate In Plane Couette Flow: The Full Solution To BusseS Problem And The Constantin-Doering-Hopf Problem With One-Dimensional Background Field
471
Improved upper bounds for probabilities of uniform deviations
472
Improved upper bounds for the information rates of the secret sharing schemes induced by the Vلmos matroid
473
Improved upper bounds on the star discrepancy of (t,m,s)-nets and (t,s)-sequences
474
Improved uptake of plant-derived LTB-linked proteins in carp gut and induction of specific humoral immune responses upon infeed delivery
475
Improved use of the [13C]octanoic acid breath test as intra-individual parameter to study the effect of a prokinetic drug on gastric emptying in preterm infants with oral feeding intolerance
476
Improved U–Th–total Pb dating of zircons by electron microprobe using a simple new background modeling procedure and Ca as a chemical criterion of fluid-induced U-Th-Pb discordance in zircon
477
Improved UV-B screening capacity does not prevent negative effects of ambient UV irradiance on PSII performance in High Arctic plants. Results from a six year UV exclusion study
478
Improved vacuum-UV (VUV)-initiated photomineralization of organic compounds in water with a xenon excimer flow-through photoreactor ( lamp, 172 nm) containing an axially centered ceramic oxygenator
479
Improved validated bounds for Taylor coefficients and for Taylor remainder series
480
Improved variable and value ranking techniques for mining categorical traffic accident data
481
Improved variable reduction in partial least squares modelling based on Predictive-Property-Ranked Variables and adaptation of partial least squares complexity Original Research Article
482
Improved variable selection procedure for multivariate linear regression
483
Improved variance estimation for balanced samples drawn via the cube method
484
Improved variance estimation under sub-space restriction
485
Improved variance estimators for one- and two-parameter models of nucleotide substitution
486
Improved variational analysis of deconfinement in SU(N) gauge theory
487
Improved vascular relaxation response to acetylcholine with ingestion of flaxseed in hypercholesterolemic rabbits
488
Improved vector and scalar masses in the massive Schwinger model
489
Improved vector FEM solutions of Maxwellʹs equations using grid pre-conditioning
490
Improved Vector Quantization Approach for Discrete HMM Speech Recognition System
491
Improved vectorial finite-element BPM analysis for transverse anisotropic media
492
Improved Velocity Distribution Applied to Fokker-Planck-Kramers Equation Treatment for Dynamics of DiffusionControlled Reactions in Two Dimensions
493
Improved velocity estimation using single loop detectors
494
Improved verification methodology for TRAC-PF1/NEM using NEA/OECD core transient benchmarks
495
Improved version of parallel programming interface for distributed data with multiple helper servers Original Research Article
496
Improved version of perturbed Ostrowski type inequalities for n -times differentiable mappings with three-step kernel and its application
497
Improved version of the triode electron gun
498
Improved version of the triode electron gun
499
Improved vertically stacked Si/SiGe resonant interband tunnel diode pair with small peak voltage shift and unequal peak currents
500
Improved viability of random pattern skin flaps with the use of bone marrow mesenchymal-derived stem cells and chicken embryo extract
501
Improved virial coefficients
502
Improved Virtual Force Algorithm based on the States of Matter for Improving Coverage of Mobile Wireless Sensor Networks
503
Improved visibility graph fractality with application for the diagnosis of Autism Spectrum Disorder
504
Improved visible light absorption of HTaWO6 induced by nitrogen doping: An experimental and theoretical study
505
Improved visible light photocatalytic activity of MWCNT/BiOBr composite synthesized via a reactable ionic liquid
506
Improved visible-light responsive photocatalytic activity of N and Si co-doped titanias
507
Improved Visual Detection of speB Gene in Streptococcus pyogenes Isolates by Real-time Loop-Mediated Isothermal Amplification Turbidimetry Method
508
Improved visual sensitivity during smooth pursuit eye movements: Temporal and spatial characteristics
509
Improved visualisation of the design space using nested performance charts
510
Improved visualization in minimally invasive coronary bypass grafting
511
Improved visualization of pulmonary venous flow doppler signal by intravenous injection of sonicated albumin
512
Improved vitamin B12 production by step-wise reduction of oxygen uptake rate under dissolved oxygen limiting level during fermentation process
513
Improved volatile fatty acid and biomethane production from lipid removed microalgal residue (LRμAR) through pretreatment
514
Improved volatile fatty acids production from proteins of sewage sludge with anthraquinone-2,6-disulfonate (AQDS) under anaerobic condition
515
Improved volcanic ash detection based on a hybrid reverse absorption technique
516
Improved voltage and reactive power distribution factors for outage studies
517
Improved Voltage Collapse Proximity Index for Prediction of Voltage Instability in Distribution Networks
518
Improved voltage regulation for current-source inverters
519
Improved wastewater disinfection by ultrasonic pre-treatment
520
Improved wastewater disinfection by ultrasonic pre-treatment
521
Improved water capture and erosion reduction through furrow diking
522
Improved water dissociation and nitrous oxide decomposition by in situ oxygen removal in perovskite catalytic membrane reactor
523
Improved water quality in response to pollution control measures at Masan Bay, Korea
524
Improved water table dynamics in MODFLOW
525
Improved Water Use Efficiency Associated with Cultivars and Agronomic Management in the North China Plain
526
Improved watershed transform for medical image segmentation using prior information
527
Improved watershed transform for tumor segmentation: Application to mammogram image compression
528
Improved Wavelet-based Spatial Filter of Damage Imaging Method on Composite Structures
529
Improved wavelet-based watermarking through pixel-wise masking
530
Improved WCTSE method for the generation of 2D weight functions through implementation into a commercial finite element code
531
Improved wear behaviour of alumina–aluminium titanate laminates with low residual stresses and large grained interfaces
532
Improved wear performance of ultra high molecular weight polyethylene coated with hydrogenated diamond like carbon
533
Improved wear resistance in alumina-PTFE nanocomposites with irregular shaped nanoparticles
534
Improved wear resistance of medium carbon microalloyed bainitic steels
535
Improved wear resistance of orthopaedic UHMWPE by reinforcement with zirconium particles
536
Improved wear resistance of P/M tool steel alloy with different vanadium contents after ion nitriding
537
Improved wear resistance of Si3N4 tool inserts by addition of Al2O3 platelets
538
Improved Wear Resistance of the Fe-C-Ti Hardfacing Alloy by Nano TiCN Particles Fabricated by FCAW-N2
539
Improved wear resistance of ultra-high molecular weight polyethylene by plasma immersion ion implantation
540
Improved weed control with broadleaved herbicides in glyphosate-tolerant soybean (Glycine max)
541
Improved Weighted 0-1 Knapsack Method (WKM) to Optimize Resource Allocation
542
Improved weighted least squares algorithm for the design of quadrature mirror filters
543
Improved weighting methods, deterministic and stochastic data-driven models for estimation of missing precipitation records
544
Improved weld strength of P/M bimetallic tubes and transition joints by means of nano interlayer particles
545
Improved weld strength of P/M bimetallic tubes and transition joints by means of nano interlayer particles
546
Improved wet oxidation for the treatment of dyeing wastewater concentrate from membrane separation process
547
Improved wetland remote sensing in Yellowstone National Park using classification trees to combine TM imagery and ancillary environmental data
548
Improved white organic electroluminescent devices using fine mesh as an evaporation mask
549
Improved WHO coordination: a "seed of change"?
550
Improved WLP and GWP lower bounds based on exact integer programming
551
Improved workability of injectable calcium sulfate bone cement by regulation of self-setting properties
552
Improved workflow for 3D inverse modeling of magnetotelluric data: Examples from five geothermal systems
553
Improved worst-case complexity for the MIN 3-SET COVERING problem
554
Improved wrist pannus volume measurement from contrast-enhanced MRI in rheumatoid arthritis using shuffle transform
555
Improved X-ray powder diffraction data for Ti2AIN
556
Improved yield from aquifers of limited saturated thickness using inverted wells
557
Improved yield in molecular electronic devices using amino-style molecules
558
Improved yield in molecular electronic devices using amino-style molecules
559
Improved yield of solvent free enzymatic methanolysis of palm and jatropha oils blended with castor oil
560
Improved yield parameters in catalytic steam gasification of forestry residue; optimizing biomass feed rate and catalyst type
561
Improved yields of meta-amination and symmetrical and unsymmetrical diamination of benzenes
562
Improved yne–ene-cross metathesis utilizing a dihydroimidazole carbene ruthenium complex
563
Improved Yorùbá Language Option of the Automated Teller Machine using Translation Equivalence Model
564
Improved Young and Heinz inequalities for matrices
565
Improved ZCS-PWM commutation cell for IGBTs application
566
Improved Zhang neural network model and its solution of time-varying generalized linear matrix equations
567
Improved zinc oxide surge arresters using high voltage gradient 300 V/mm, 400 V/mm ZnO elements
568
Improved zinc tolerance in Eucalyptus globulus inoculated with Glomus deserticola and Trametes versicolor or Coriolopsis rigida
569
Improved zinc tolerance in Eucalyptus globulus inoculated with Glomus deserticola and Trametes versicolor or Coriolopsis rigida
570
Improved γ-alumina support based pseudo-boehmite shaped by micro-extrusion process for oxygen carrier support application
571
ImprovedapproachforobtainingrotationalcomponentsofseismicmotionOriginalResearchArticle
572
Improved-Delayed-Detached-Eddy Simulation of cavity-induced transition in hypersonic boundary layer
573
Improved-LDA based face recognition using both facial global and local information
574
Improved-performance knitted fibre mats as supports for pre-mixed natural gas catalytic combustion
575
Improvement Analysis of Response Between Jacket Platforms and Sea Waves using the Vibration Dampers
576
Improvement and application of a numerical model for optimizing the design of magnetic refrigerators
577
Improvement and application of a simple diluter
578
Improvement and automation of artificial neural networks to estimate medical outcomes
579
Improvement and characterization of an automatic aerosol sampler for remote (glacier) sites
580
Improvement and characterization of an impregnated iron-based catalyst for direct coal liquefaction
581
Improvement and characterization of surfactant-modified Prussian blue screen-printed carbon electrodes for selective H2O2 detection at low applied potentials
582
Improvement and comparison of some estimators dedicated to thermal diffusivity estimation of orthotropic materials with the 3D-flash method
583
Improvement and extension of the application scope for matrix-assisted laser desorption/ionization mass spectrometric analysis-oriented N-alkylpyridinium isotope quaternization Original Research Article
584
Improvement and extension to new analytes of a multi-residue method for the determination of pesticides in cereals and dry animal feed using gas chromatography–tandem quadrupole mass spectrometry revisited
585
Improvement and field testing of a combined horizontal penetrometer for on-the-go measurement of soil water content and mechanical resistance
586
Improvement and further generalization of inequalities of Ostrowski-Grüss type
587
Improvement and mechanism for the fast response of a Pt/TiO2 gas sensor
588
Improvement and mechanism of interfacial adhesion in PBO fiber/bismaleimide composite by oxygen plasma treatment
589
Improvement and modelling of a batch polyelectrolyte enhanced ultrafiltration process for the recovery of copper Original Research Article
590
Improvement and modification of the routing system for the health-care waste collection and transportation in İstanbul
591
Improvement and modification of whey protein gel texture using polysaccharides
592
Improvement and Optimization of Thin Dipole for UWB Applications
593
Improvement and validation of a liquid chromatographic method for the determination of levosulpiride in human serum and urine
594
Improvement and validation of a model for photovoltaic array performance
595
Improvement and validation of a multi-zone model for HCCI engine combustion concerning performance and emissions
596
Improvement and validation of a pea crop growth model to simulate the growth of cultivars infected with Ascochyta blight (Mycosphaerella pinodes)
597
Improvement and validation of an HPLC method for examining the effects of the MDR1 gene polymorphism on sparfloxacin pharmacokinetics
598
Improvement and validation the method using dispersive liquid–liquid microextraction with in situ derivatization followed by gas chromatography–mass spectrometry for determination of tricyclic antidepressants in human urine samples
599
Improvement Anomaly Intrusion Detection using Fuzzy-ART Based on K-means based on SNC Labeling
600
Improvement by heating of the electronic conductivity of cobalt spinel phases, electrochemically synthesized in various electrolytes
601
Improvement by phosphoramidon of damaged endothelial function in porcine coronary artery
602
Improvement by practice-based learning
603
Improvement by recrystallisation of Aurivillius-type structure piezoceramics from mechanically activated precursors Original Research Article
604
Improvement by surface modification of Ir electrode-barrier for Pb(Zr,Ti)O3-based high-density nonvolatile ferroelectric memories
605
Improvement characteristics shown in holistic regeneration of Ballymun toward sustainable community
606
Improvement compressive strength of concrete in different curing media by Al2O3 nanoparticles
607
Improvement cycleability of core–shell silicon/copper composite electrodes for Li-ion batteries by using electroless deposition of copper on silicon powders
608
Improvement Damping Power System Oscillations by Using Static Synchronous Series Compensator
609
Improvement deoxyribo nucleic acid spots classification in polyacrilamide gel images using photometric normalization algorithms Original Research Article
610
Improvement effect of Lycium barbarum polysaccharide on sub-health mice
611
Improvement effects of vibration on cutting force in rotary ultrasonic machining of BK7 glass
612
Improvement Efficacy of Influenza Nanovaccine in Combination with Hemokinin-1 Molecular Adjuvant
613
Improvement Efficiency of AgO Cathode and Zinc Anode for AgO/Zn Alkaline Primary Cell
614
Improvement electrical properties of sol–gel derived lead zirconate titanate thick films for ultrasonic transducer application
615
IMPROVEMENT EVALUATION OF SUBGRADE LAYER UNDER GEOGRID-REINFORCED AGGREGATE LAYER BY FINITE ELEMENT METHOD
616
Improvement Following Correction of Secondary Mitral Regurgitation in End-Stage Cardiomyopathy With Mitral Annuloplasty
617
Improvement for Bacterial Wilt Resistance in Potato By Conventional and Biotechnological Approaches
618
Improvement heuristic for the flow-shop scheduling problem: An adaptive-learning approach
619
Improvement heuristics for the Vehicle Routing Problem based on simulated annealing
620
Improvement in 90Sr measurements at very low levels in environmental samples
621
Improvement in Accuracy and Speed of Image Semantic Segmentation via Convolution Neural Network Encoder-Decoder
622
Improvement in accuracy in potential method for detecting EDM spark locations
623
Improvement in accuracy of the finite element method in analysis of stability of Euler–Bernoulli and Timoshenko beams
624
Improvement in accuracy of the measurements of residual stresses due to circumferential welds in thin-walled pipe using Rayleigh wave method Original Research Article
625
Improvement in Activity of Daily Living and Fatigue in Multiple Sclerosis Patients: the Impact of Nutrition Education
626
Improvement in adherence to surgical antimicrobial prophylaxis guidelines after implementation of a multidisciplinary quality improvement project
627
Improvement in Adhesion Behavior of Aluminum Due to Surfaces Treatment with Arc Discharge
628
Improvement in adhesion of diamond film on Cu substrate with an inlay structured interlayer
629
Improvement in adhesion of polyethylene by glow-discharge plasma
630
Improvement in air oxidation resistance of carbon materials by W2B5 ceramic reinforcement
631
Improvement in alertness and behavior in children treated with combination topiramate and vagus nerve stimulation
632
Improvement in amblyopic eye function and contralateral eye disease: evidence of residual plasticity
633
Improvement in anodes used in Hall-Héroult cells
634
Improvement in anti-aging of metallized Nafion® hydrogen sensors modified by chemical vapor deposition of polypyrrole
635
Improvement in antibacterial properties of Ti by electrodeposition of biomimetic Ca–P apatite coat on anodized titania
636
Improvement in antigen-delivery using fabrication of a grooves-embedded microneedle array
637
Improvement in antihypertensive and antianginal effects of felodipine by enhanced absorption from PLGA nanoparticles optimized by factorial design
638
Improvement in Austenitic Stainless Steel Implant via Dual-Layer Coating of TaN-DLC Using Sputtering and PACVD Methods
639
Improvement in Balance and Gait Speed of MS Patients under Challenge Point Framework
640
Improvement in beta-islets of Langerhans in alloxan-induced diabetic rats by erythropoietin and spirulina
641
Improvement in bioavailability of transdermally applied flurbiprofen using tulsi (Ocimum sanctum) and turpentine oil
642
Improvement in Biochemical Parameters in Patients with Type 2 Diabetes After Twenty-Four Sessions of Aerobic Exercise: A Randomized Controlled Trial
643
Improvement in biocompatibility of ZrO2–Al2O3 nano-composite by addition of HA
644
Improvement in biodiesel production from soapstock oil by one-stage lipase catalyzed methanolysis
645
Improvement in blood pressure control through interdisciplinary medication assistance efforts in hypertensive patients with multiple metabolic syndrome
646
Improvement in Blood Transfusion Safety: Using Root Cause Analysis
647
Improvement in bovine embryo production in vitro by treatment with green tea polyphenols during in vitro maturation of oocytes
648
Improvement in breakdown characteristics with multiguard structures in microstrip silicon detectors for CMS
649
Improvement in breakdown characteristics with multiguard structures in microstrip silicon detectors for CMS
650
Improvement in brittleness of amorphous Fe-Si-B-C alloy ribbons by controlling casting conditions
651
Improvement in brittleness of amorphous Fe-Si-B-C alloy ribbons by controlling casting conditions
652
Improvement in Cable Rating Calculations by Consideration of Dependence of Losses on Temperature
653
Improvement in capacitive deionization function of activated carbon cloth by titania modification
654
Improvement in Capacity and Signal Strength Using LMS Algorithm
655
Improvement in Cardiac Function With Small Intestine Extracellular Matrix Is Associated With Recruitment of C-Kit Cells, Myofibroblasts, and Macrophages After Myocardial Infarction
656
Improvement in cavitation erosion resistance of a copper-based propeller alloy by laser surface melting
657
Improvement in Classification Accuracy Rate Using Multiple Classifier Fusion Towards Computer Vision Detection of Malaria Parasite (Plasmodium vivax)
658
Improvement in clinical signs and cellular immunity of dogs with visceral leishmaniasis using the immunomodulator P-MAPA
659
Improvement in coal content of coal–water slurry using hybrid coal impregnated with molasses
660
Improvement in Cognitive Status and Depressive Symptoms Three Months after Cataract Surgery
661
Improvement in Confidence Levels for the Management of Paediatric Cardiac Arrests in Medical Students Following a Training Course
662
Improvement in corrosion resistance of a nodular cast iron surface modified by plasma beam treatment
663
Improvement in corrosion resistance of CrN coated stainless steel by conformal TiO2 deposition
664
Improvement in credit card fraud detection using ensemble classification technique and user data
665
Improvement in crystal orientation of AlN thin films prepared on Mo electrodes using AlN interlayers
666
Improvement in crystal quality of epitaxial Ag and Cu films induced by self-ion irradiation
667
Improvement in crystalline quality and surface smoothness of ZnO film by multi-step deposition process
668
Improvement in demand-controlled ventilation simulation on multi-purposed facilities under an occupant based ventilation standard
669
Improvement in depression associated with partial epilepsy in patients treated with lamotrigine
670
Improvement in desorption kinetics of NaAlH4 catalyzed with TiO2 nanopowder
671
Improvement in deuterium recovery from water–isotope mixture by thermal diffusion in the device of branch columns
672
Improvement in device performance of multi-pass flat-plate solar air heaters with external recycle
673
Improvement in device performance on laminar counterflow concentric circular heat exchangers with uniform wall fluxes
674
Improvement in diagnosis of breast tumour using ultrasound elastography and echography: A phantom based analysis
675
Improvement in diastolic function and left ventricular filling pressure induced by cardiac resynchronization therapy
676
Improvement in Differential GPS Accuracy using Kalman Filter
677
Improvement in Documentation of Intake and Output Chart
678
Improvement in Doppler alternans in patients with severe heart failure: Levosimendan versus dobutamin
679
Improvement in durability of flexible plastic dye-sensitized solar cell modules
680
Improvement in dye-sensitized solar cells employing TiO2 electrodes coated with Al2O3 by reactive direct current magnetron sputtering
681
Improvement in dynamic properties of laminated MWCNT-polystyrene composite beams via an integrated numerical–experimental approach
682
Improvement in electrical and magnetic properties of mixed Mg–Al–Mn ferrite system synthesized by citrate precursor technique Original Research Article
683
Improvement in electrical characteristics of HfO2 gate dielectrics treated by remote NH3 plasma
684
Improvement in electrical performance of radiation-damaged silicon solar cells by annealing
685
Improvement in electrical performance of radiation-damaged silicon solar cells by annealing
686
Improvement in electrical properties of SOI-SIMNI films by multiple-step implantation
687
Improvement in electrochemical capacitance of carbon materials by nitric acid treatment
688
Improvement in electrochemical performance of V2O5 by Cu doping
689
Improvement in electrochemical properties of nano-tin-polyaniline lithium-ion composite anodes by control of electrode microstructure
690
Improvement in electrokinetic remediation of heavy metal spiked kaolin with the polarity exchange technique
691
Improvement in electron and hole injection at electrodes and in recombination at a two-organic-layer interface
692
Improvement in endothelial function by angiotensin-converting enzyme inhibition in non–insulin-dependent diabetes mellitus
693
Improvement in endothelium-dependent brachial artery flow-mediated vasodilation with low-density lipoprotein cholesterol levels <100 mg/dl
694
Improvement in end-use quality of spring wheat varieties grown in different eras
695
Improvement in Energy Optimization in Telecommunication Network Service
696
Improvement in Esophageal Varices and Liver Histology Postoperatively in Budd-Chiari Syndrome
697
Improvement in estimating the population mean in simple random sampling Original Research Article
698
Improvement in exercise capacity and exercise blood pressure response after transcoronary alcohol ablation therapy of septal hypertrophy in hypertrophic cardiomyopathy
699
Improvement in exercise capacity of candidates awaiting heart transplantation
700
Improvement in exercise-induced left ventricular dysfunction by infusion of α-human atrial natriuretic peptide in coronary artery disease
701
Improvement in fast particle track reconstruction with robust statistics
702
Improvement in fast particle track reconstruction with robust statistics
703
Improvement in fatigue characteristics of newly developed beta type titanium alloy for biomedical applications by thermo-mechanical treatments
704
Improvement in fatigue performance of friction stir welded A6061-T6 aluminum alloy by laser peening without coating
705
Improvement in fatigue property for a PZT ferroelectric film device with SRO electrode film prepared by chemical solution deposition
706
Improvement in fatigue strength while keeping low Youngʹs modulus of a β-type titanium alloy through yttrium oxide dispersion
707
Improvement in filtration characteristics of diatomite by calcination
708
Improvement in food intake and nutritive utilization of protein from Lupinus albus var. multolupa protein isolates supplemented with ascorbic acid
709
Improvement in formability by control of temperature in hot stamping of ultra-high strength steel parts
710
Improvement in formability of aluminum alloy sheet by enhancing geometrical hardening
711
Improvement in formability of tailor welded blanks by application of counter pressure in biaxial stretch forming
712
Improvement in fracture toughness of an epoxy/copper composite through the use of various end shaped fibers
713
Improvement in fracture toughness of an epoxy/copper composite through the use of various end shaped fibers
714
Improvement in friction by cw Nd:YAG laser surface treatment on cast iron cylinder bore
715
Improvement in fruiting body yield by introduction of the Ampullaria crossean multi-functional cellulase gene into Volvariella volvacea
716
Improvement in galvanization and galvannealing characteristics of DP 590 steel by prior Cu or Cu–Sn flash coating
717
Improvement in galvannealed coating of IF-HS steel strips by combined GDOES and colour-etching method
718
Improvement in gas migration reduction in oil wells by using nanoparticles: an experimental investigation
719
Improvement in gas permeability of biaxially stretched PET films blended with high barrier polymers: The role of chemistry and processing conditions
720
Improvement in gastrointestinal symptoms and quality of life after cholecystectomy
721
Improvement in greenhouse solar drying using inclined north wall reflection
722
Improvement in Growth and Developmental Milestones with Nutritional Intervention in Methylmalonic Acidemia: A Case Report
723
Improvement in Health Indicators of Islamic Republic of Iran in the Years 2004 and 2008
724
Improvement in heavy metal removal from aqueous solution using polyetherimide nanofiltration membrane modified by coating approach
725
Improvement in high temperature proton exchange membrane fuel cells cathode performance with ammonium carbonate
726
Improvement in high temperature stability of Pd coating on Nb by Nb2C intermediate layer
727
Improvement in high-temperature performance of Co-free high-Fe AB5-type hydrogen storage alloys
728
Improvement in HPLC separation of acetic acid and levulinic acid in the profiling of biomass hydrolysate
729
Improvement in hydriding property of LaNi4.8Al0.2 alloy encapsulated by SiO2 sol
730
Improvement in hydrogen bond description using van der Waals-corrected DFT: The case of small water clusters
731
Improvement in hydrogen sorption kinetics of MgH2 with Nb hydride catalyst Original Research Article
732
Improvement in hydrogen storage capacity in through substitution of Ni by Fe
733
Improvement in hydrogen storage characteristics of Mg-based metal hydrides by doping nonmetals with high electronegativity: A first-principle study
734
Improvement in impression creep property of as-cast AC515 Mg alloy by Mn addition
735
Improvement in Inducible Ischemi During Dobutamine Stress Echocardiography After Transmyocardial Laser Revascularization in Patients With Refractory Angin Pectoris
736
Improvement in industrial re-chromatography (recycling) procedure in solvent gradient bio-separation processes
737
Improvement in ion beam quality for thin-film formation
738
Improvement in ischemic parameters during repeated exercise testing: A possible model for myocardial preconditioning
739
Improvement in JOA score of treatment for complex atlas-axis fractures
740
Improvement in LC–MS calibration by addition of fragment signals
741
Improvement in learning associated with increase in hippocampal formation volume
742
Improvement in Left Ventricular Deformational Indices Following Radiofrequency Ablation in Patients with Tachycardia: A Comparative Study Between AVRT and AVNRT Regarding Left Ventricular Strain and Strain Rates
743
Improvement in left ventricular function following coronary stenting in patients with acute myocardial infarction: 6-month and 3-year follow-up
744
Improvement in left ventricular intrinsic dyssynchrony with cardiac resynchronization therapy
745
Improvement in lifetime and replication quality of Si micromold using N:DLC:Ni coatings for microfluidic devices
746
Improvement in light harvesting and performance of P3HT:PCBM solar cell by using 9,10-diphenylanthracene
747
Improvement in light-output efficiency of near-ultraviolet InGaN–GaN LEDs fabricated on stripe patterned sapphire substrates
748
Improvement in linear and nonlinear optical-properties by blending poly(N-vinyl-2-pyrrolidone) with an electro-optic polymer
749
Improvement in lipase-catalyzed methanolysis of triacylglycerols for biodiesel production using a solvent engineering method
750
Improvement in lipase-catalyzed synthesis of fatty acid methyl esters from sunflower oil
751
Improvement in lipid and haemostasis patterns afterHelicobacter pylori infection eradication in type 1 diabetic patients
752
Improvement in lithium cycling efficiency by using additives in lithium metal
753
Improvement in liver fibrosis, functionality and hemodynamics in CCl4-cirrhotic rats after injection of the Liver Growth Factor
754
Improvement in load support capability of a-C(Al)-based nanocomposite coatings by multilayer architecture
755
Improvement in long-term stability of dye-sensitized solar cell for outdoor use
756
Improvement in low-voltage performance of surface-electrode soft-X-ray detectors composed of undoped homoepitaxial CVD/HPHT Ib diamond layers
757
Improvement in low-voltage performance of surface-electrode soft-X-ray detectors composed of undoped homoepitaxial CVD/HPHT Ib diamond layers
758
Improvement in machining performance of die-sinking EDM by using self-adjusting fuzzy control
759
Improvement in macular function after retinal tranlocation urgery in a patient with age-related macular degeneration
760
Improvement in malaria services in an urban setting: role of staff motivation
761
Improvement in measures of psychological distress amongst amphetamine misusers treated with brief cognitive–behavioural therapy (CBT)
762
Improvement in mechanical and optical properties of vapour chopped vacuum evaporated PANI/PMMA composite thin film
763
Improvement in mechanical and structural integrity of natural stone by applying unsaturated polyester resin-nanosilica hybrid thin coating
764
Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers
765
Improvement in mechanical properties of in-situ Al–TiB2 composite by incorporation of carbon
766
Improvement in mechanical properties of in-situ Al–TiB2 composite by incorporation of carbon
767
Improvement in mechanical properties of in-situ Al–TiB2 composite by incorporation of carbon
768
Improvement in mechanical properties of jute fibres through mild alkali treatment as demonstrated by utilisation of the Weibull distribution model
769
Improvement in Mechanical Properties of Microalloyed Steel 30MSV6 by a Precipitation Hardening Process Original Research Article
770
Improvement in mechanical properties of plasma sprayed hydroxyapatite coatings by Al2O3 reinforcement
771
Improvement in Mechanical Properties of Titanium Deformed by ECAE Process
772
Improvement in medical risk factors and quality of life in women and men with coronary artery disease in the Multicenter Lifestyle Demonstration Project
773
Improvement in Memory and Brain Long-term Potentiation Deficits Due to Permanent Hypoperfusion/Ischemia by Grape Seed Extract in Rats
774
Improvement in mental health over time in Northern Norway
775
Improvement in methanol oxidation in a centrifugal field
776
Improvement in micro-structural and mechanical properties of zinc film by surface treatment with low temperature argon plasma
777
Improvement in Microvascular Reflow and Reduction of Infarct Size With Adenosine in Patients Undergoing Primary Coronary Stenting
778
Improvement in mood and ideation associated with increase in right caudate volume
779
Improvement in Mortality Risk Prediction After Percutaneous Coronary Intervention Through the Addition of a “Compassionate Use” Variable to the National Cardiovascular Data Registry CathPCI Dataset: A Study From the Massachusetts Angioplasty Registry
780
Improvement in nanofiber filtration by multiple thin layers of nanofiber mats
781
Improvement in Network Lifetime for On-Demand Routing in Mobile Ad hoc Networks Using either On-Demand Recharging or Transmission Power Control or Both
782
Improvement in noninvasive electrophysiologic findings in children after transcatheter atrial septal defect closure
783
Improvement in nutrient uptake and yield of wheat by combined use of urea and compost
784
Improvement in optical and physical properties of TEOS based aerogels using acetonitrile via ambient pressure drying
785
Improvement in optical transmission of the ambient pressure dried hydrophobic nanostructured silica aerogels with mixed silylating agents
786
Improvement in outcomes of multifetal pregnancy reduction with increased experience
787
Improvement in oxidation properties of SiC-coated carbon/carbon composites through modification of the SiC/carbon interface
788
Improvement in oxidation resistance of a Ni3Al-based superalloy IC6 by rhenium-based diffusion barrier coatings
789
Improvement in oxidation resistance of carbon by formation of a protective SiO2 layer on the surface
790
Improvement in oxygen reduction activity of polypyrrole-coated PtNi alloy catalyst prepared for proton exchange membrane fuel cells
791
Improvement in oxygen reduction activity of polypyrrole-coated PtNi alloy catalyst prepared for proton exchange membrane fuel cells
792
Improvement in patient–reported outcomes after group poetry therapy of women with breast cancer
793
Improvement in performance of cryocoolers as condensers
794
Improvement in performance of high-operating temperature HgCdTe photodiodes
795
Improvement in performance of MgO–CaO refractories by addition of nano-sized ZrO2
796
Improvement in performance of multi-pass laminar counterflow heat exchangers with external refluxes
797
Improvement in performance of organic light-emitting devices by inclusion of multi-wall carbon nanotubes
798
Improvement in performance of organic light-emitting diodes by adjusting charge-carrier mobility in organic/inorganic hybrid hole transporting layer
799
Improvement in Performance of ZnO based DSC Prepared by Spraying Method
800
Improvement in performance on laminar counterflow concentric circular heat exchangers with external refluxes
801
Improvement in photocatalysts and photocatalytic reactors for water and wastewater treatment: A review
802
Improvement in photoelectric conversion of a phthalocyanine-sensitized TiO2 electrode by doping with porphyrin Original Research Article
803
Improvement in photoluminescence efficiency of Si1−xGex alloy nanocrystals embedded in SiO2 matrices by P doping
804
Improvement in photovoltaic conversion efficiency of InGaP solar cells grown on Si substrate by thermal cleaning using Si2H6
805
Improvement in photovoltaic properties of silicon solar cells with a doped porous silicon layer with rare earth (Ce, La) as antireflection coatings
806
Improvement in physical and mechanical properties of aluminum/zircon composites fabricated by powder metallurgy method
807
Improvement in Physical and Mechanical Properties of Butyl Rubber with Montmorillonite Organo-clay.
808
Improvement in physical properties of paper fabric using multi-wall carbon nanotubes
809
Improvement in physicochemical properties of ezetimibe using a crystal engineering technique
810
Improvement in physiological and psychological parameters after 6 months of yoga practice
811
Improvement in polyetherimide gas separation membranes through the incorporation of nanostructured metal complexes
812
Improvement in post-irradiation ductility of neutron irradiated V–Ti–Cr–Si–Al–Y alloy and the role of interstitial impurities
813
Improvement in post-thaw viability of in vitro-produced bovine blastocysts vitrified by glass micropipette (GMP)
814
Improvement in post-treatment of digested swine wastewater
815
Improvement in power conversion efficiency and long-term lifetime of organic photovoltaic cells by using bathophenanthroline/molybdenum oxide as compound cathode buffer layer
816
Improvement in power quality and a simple method of subharmonic suppression for a cycloconverter-fed synchronous motor drive
817
Improvement in precision of the liquid chromatographic–electrospray ionization tandem mass spectrometric analysis of 3′-C-ethynylcytidine in rat plasma
818
Improvement in preventing metal contamination from an electrode used for generating microwave plasma in liquid
819
Improvement in production and purification bioprocesses of bacterially expressed anti-alphaIIbbeta3 human single-chain FV antibodies
820
Improvement in properties and air oxidation resistance of carbon materials by boron oxide impregnation Original Research Article
821
Improvement in properties of coal water slurry by combined use of new additive and ultrasonic irradiation
822
Improvement in properties of coal water slurry by combined use of new additive and ultrasonic irradiation
823
Improvement in properties of epoxy-based electrophoretic coating by silica/polyurethane nanocomposites
824
Improvement in protein separation in Barretts esophagus samples using two-dimensional capillary electrophoresis analysis in presence of cyclodextrins as buffer additives
825
Improvement in protein utilization in nursing-home patients on tube feeding supplemented with an enzyme product derived from Aspergillus niger and Bromelain
826
Improvement in radiation hardness of PbWO4 scintillating crystals by La-doping
827
Improvement in radiation hardness of PbWO4 scintillating crystals by La-doping
828
Improvement in raw sago starch degrading enzyme production from Acremonium sp. endophytic fungus using carbon and nitrogen sources
829
Improvement in Recognition Techniques for Human Computer Interaction
830
Improvement in recovery of deuterium from water-isotope mixture in concentric-tube thermal diffusion columns
831
Improvement in recovery of deuterium from water–isotopes mixture in inclined thermal-diffusion columns
832
Improvement in renal cholesterol emboli syndrome after simvastatin
833
Improvement in renal function in hepatorenal syndrome with N-acetylcysteine
834
Improvement in response of resistive oxygen sensor based on ceria–zirconia thick film with Pt catalyst on surface
835
Improvement in rollability of AZ91 magnesium alloy by carbon addition
836
Improvement in seizure control and quality of life in medically refractory epilepsy patients converted from polypharmacy to monotherapy
837
Improvement in selective catalytic reduction of nitrogen oxides by using dielectric barrier discharge
838
Improvement in Semen Quality and Occurrence of Pregnancy Treated with an Herbal Medication: A Case Report
839
Improvement in semiconductor laser printing using a sacrificial protecting layer for organic thin-film transistors fabrication
840
Improvement in sensitivity and selectivity of InP-based gas sensors: pseudo-Schottky diodes with palladium metallizations
841
Improvement in sentinel node biopsy results in a teaching community hospital: results of a multidisciplinary quality improvement program
842
Improvement in separation of SMA from matrix in SMA embedded smart structures
843
Improvement in separation of SMA from matrix in SMA embedded smart structures
844
Improvement in Serum Biochemical Alterations and Oxidative Stress of Liver and Pancreas following Use of Royal Jelly in Streptozotocin-Induced Diabetic Rats
845
Improvement in settleability and dewaterability of waste activated sludge by solar photocatalytic treatment in Ag/TiO2-coated glass tubular reactor
846
Improvement in Severe Heart Failure Post-Successful Renal Transplantation: A Single-Centre Experience with Seven Cases
847
Improvement in shape memory in magnesium niobate modified PZST
848
Improvement in shelf-life and safety of perishable foods by plant essential oils and smoke antimicrobials Review Article
849
Improvement in shoulder rotation in complex shoulder fractures treated by reverse shoulder arthroplasty
850
Improvement in signal reliability when measuring Lglutamate released from cultured cells using multichannel microfabricated sensors
851
Improvement in signal reliability when measuring l-glutamate released from cultured cells using multi-channel microfabricated sensors Original Research Article
852
Improvement in simulation of equilibrium particle emission using intranuclear cascade evaporation model
853
Improvement in simulation of equilibrium particle emission using intranuclear cascade evaporation model
854
Improvement in sinterability and phase stability of hydroxyapatite and partially stabilized zirconia composites
855
Improvement in soil properties and soil water content due to the application of rice husk biochar and straw compost in tropical upland
856
Improvement in solid oxide fuel cell performance through design modifications: An approach based on root cause analysis
857
Improvement in sonochemical degradation of 4-chlorophenol by combined use of Fenton-like reagents
858
Improvement in sonochemical degradation of 4-chlorophenol by combined use of Fenton-like reagents
859
Improvement in soot concentration measurements by laser-induced incandescence (LII) through a particle size correction
860
Improvement in Speech Recognition Performance using Beamforming based Speech Enhancement
861
Improvement in spine bone density and reduction in risk of vertebral fractures during treatment with antiresorptive drugs
862
Improvement in stability of bilayer organic solar cells using an ultra-thin Au layer
863
Improvement in stability of poly(3-hexylthiophene-2,5-diyl)/[6,6]-phenyl-C61-butyric acid methyl ester bulk heterojunction solar cell by using UV light irradiation
864
Improvement in Staging of Esophageal Cancer With the Addition of Positron Emission Tomography
865
Improvement in steroid screening for doping control with special emphasis on stanozolol
866
Improvement in strength and toughness of austempered ductile cast iron by a novel two-step austempering process
867
Improvement in stress rupture properties of inconel 718 gas tungsten arc welds using current pulsing
868
Improvement in Survival After Mechanical Circulatory Support With Pneumatic Pulsatile Ventricular Assist Devices in Pediatric Patients
869
Improvement in TDEM sounding interpretation in presence of induced polarization. A case study in resistive rocks of the Fogo volcano, Cape Verde Islands
870
Improvement in tensile strength and load bearing capacity during dry wear of Al–7Si alloy by combined grain refinement and modification
871
Improvement in tensile strength and load bearing capacity during dry wear of Al–7Si alloy by combined grain refinement and modification
872
Improvement in texture using calcium lactate and heat-shock treatments for stored ready-to-eat carrots Original Research Article
873
Improvement in the Administration of Preoperative Antibiotics in Total Joint Replacement Surgeries
874
Improvement in the adsorption of thiabendazole by using aluminum pillared clays
875
Improvement in the Amino Acid Imbalance in Hepatitis C Virus Infected Patients After Viral Eradication by Interferon Treatment
876
Improvement in the applicability of the air tightness measurement using a sudden expansion of compressed air
877
Improvement in the bias stability of amorphous InGaZnO TFTs using an Al2O3 passivation layer
878
Improvement in the catalyst activity for direct synthesis of dimethyl ether from synthesis gas through enhancing the dispersion of CuO/ZnO/γ-Al2O3 in hybrid catalysts Original Research Article
879
Improvement in the catalytic performance of In-mordenite through preferential growth on metallic monoliths Original Research Article
880
Improvement in the colloidal processing of concentrated silicon nitride slips with ammonium polyacrylate by an yttria–alumina surface coating
881
Improvement in the corrosion resistance of Al18B4O33w/2024Al composite by laser surface treatment
882
Improvement in the corrosion resistance of TiB2/A356 composite by molten-salt electrodeposition and anodization
883
Improvement in the corrosive fatigue damage to the low-pressure steam turbine blades due to unbalanced currents
884
Improvement in the counting statistics and in the limit of detection with Compton suppression spectrometers—a contribution to instrumental neutron activation analysis
885
Improvement in the design of a pot tester to simulate erosion wear due to solid–liquid mixture
886
Improvement in the desorption of H2 from the MgH2 (1 1 0) surface by means of doping and mechanical strain
887
Improvement in the detection of impurities affecting ethylene glycol UV transmittance by gas chromatography–mass spectrometry
888
Improvement in the determination of lead in cod liver by graphite furnace atomic absorption spectrometry
889
Improvement in the Efficiency of an Impeller by Projecting the Vane into the Eye
890
Improvement in the efficiency of Cu-doped CdS/non-doped CdS photovoltaic cells fabricated by an all-vacuum process
891
Improvement in the electrochemical performance of LixV2O5 induced by Tb doping
892
Improvement in the electrochemical properties of gas atomized AB2 metal hydride alloys by hydrogen annealing
893
Improvement in the emission properties of a luminescent anionic dye intercalated between the lamellae of zinc hydroxide-layered
894
Improvement in the endothelium-dependent relaxation in hypercholesterolemic rabbits treated with vitamin E Original Research Article
895
Improvement in the epigenetic modification and development competence in PCOS mice oocytes by hydro-alcoholic extract of Nigella sativa during in-vitro maturation: An experimental study
896
Improvement in the Fault Boundary Conditions for a Staggered Grid Finite-difference Method
897
Improvement in the field-weakening performance of switched reluctance machine with continuous mode
898
Improvement in the floatability of CuO by dry grinding with sulphur
899
Improvement in The Function of Isolated Rat Pancreatic Islets through Reduction of Oxidative Stress Using Traditional Iranian Medicine
900
Improvement in the generation of adsorption isotherm data in the elution by characteristic points method—The ECP-slope approach
901
Improvement in the geopolymer-to-steel bond using a reactive vitreous enamel coating
902
Improvement in the GERB short wave flux estimations over snow covered surfaces Original Research Article
903
improvement in the growth and α-toxin production of clostridium septicum by magnesium sulfate
904
Improvement in the hole collection of polymer solar cells by utilizing gold nanoparticle buffer layer
905
Improvement in the hydrogen storage properties of Mg by mechanical grinding with Ni, Fe and V under H2 atmosphere
906
Improvement in the hydrogen-storage properties of Mg by the addition of metallic elements Ni, Fe, and Ti, and an oxide Fe2O3
907
Improvement in the interpretation of stress measurements by use of the overcoring method: development of a new approach
908
Improvement in the light emission characteristics of CdS:Cu/CdS diodes
909
Improvement in the load-bearing capacity and adhesion of TiC coatings on TiAl6V4 by duplex treatment
910
Improvement in the low temperature performance of gelled polymer lithium-ion cells
911
Improvement in the luminescence properties of Si/CaF2 nanostructures
912
Improvement in the luminescence properties of Si/CaF2 nanostructures
913
Improvement in the measurement of diffusion coefficients in a restricted diffusion cell: Case of binary electrolytes
914
Improvement in the measurement of spectrophotometric data in the m-hydroxydiphenyl pectin determination methods
915
Improvement in the mechanical efficiency of walking: An explanation for the “placebo effect” seen during repeated exercise testing of patients with heart failure, ,
916
Improvement in the mechanical performances of carbon fiber/epoxy composite with addition of nano-(Polyvinyl alcohol) fibers
917
Improvement in the mechanical properties of polyacrylonitrile (PAN)-based carbon fibers after fluorination
918
Improvement in the method of data processing
919
Improvement in the microstructure and property of plasma sprayed metallic, alloy and ceramic coatings by pre-/during-treatment of dry-ice blasting
920
Improvement in the morphology of micro-arc oxidised titanium surfaces: A new process to increase osteoblast response
921
Improvement in the morphology of Ti-based surfaces: a new process to increase in vitro human osteoblast response
922
Improvement in the nonlinear electrical characteristics of SnO2 ceramic varistors with Dy2O3 additive
923
Improvement in the nonlinear electrical characteristics of SnO2 ceramic varistors with Dy2O3 additive
924
Improvement in the non-linear electrical characteristics of the SnO2·CoO·Ta2O5 varistor material with La2O3 additive
925
Improvement in the optical quality of GaInNAs/GaInAs quantum well structures by interfacial strain reduction
926
Improvement in the oxidation resistance of a γ-TiAl-based alloy by sol–gel derived Al2O3 film
927
Improvement in the oxidation resistance of liquid-phase-sintered silicon carbide with aluminum oxide additions
928
Improvement in the oxidation resistance of α2-Ti3Al by sputtering Al film and subsequent interdiffusion treatment
929
Improvement in the performance of automated spike detection using dipole source features for artefact rejection
930
Improvement in the permeation performance of hybrid membranes by the incorporation of functional multi-walled carbon nanotubes
931
Improvement in the photocatalytic activity of TiO2 by the partial oxidation of the C impurities
932
Improvement in the photovoltaic efficiency of polymer solar cells by treating the poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) buffer layer with co-solvents of hydrophilic organic solvents and hydrophobic 1,2-dichlorobenzene
933
Improvement in the Ppy/V2O5 hybrid as a cathode material for Li ion batteries using PSA as an organic additive
934
Improvement in the Production of L-Lysine by Overexpression of Aspartokinase (ASK) in C. glutamicum ATCC 21799
935
Improvement in the productivity of xylooligosaccharides from waste medium after mushroom cultivation by hydrothermal treatment with suitable pretreatment
936
Improvement in the properties of nickel by nano-Cr2O3 incorporation
937
Improvement in the properties of plasma-sprayed chromium carbide coatings using nickel-clad powders
938
Improvement in the properties of plasma-sprayed metallic, alloy and ceramic coatings using dry-ice blasting
939
Improvement in the quality of ground chevon during refrigerated storage by tocopherol acetate preblending
940
Improvement in the radial accuracy of altimeter-satellite orbits due to the geopotential
941
Improvement in the remaining activity of freeze-dried xanthine oxidase with the addition of a disaccharide–polymer mixture
942
Improvement in the resistance of aluminum with yttria particles to sliding wear in air and in a corrosive medium
943
Improvement in the separation efficiency of transesterification reaction compounds by the use of supported ionic liquid membranes based on the dicyanamide anion Original Research Article
944
Improvement in the SPH-Paddle Wave Maker Approach for Real Tsunami Waves Modeling
945
Improvement in the stability and functionality of Nicotiana tabacum produced recombinant TRAIL through employment of endoplasmic reticulum expression and ascorbate buffer mediated extraction strategies
946
Improvement in the structure of fire alarm systems' alarm bell stop switch
947
Improvement in the Survival of Esophageal Cancer Patients at Cancer Institute of Iran after Implementation of the Neo-adjuvant Chemo-radiation: Retrospective Cohort Study
948
Improvement in the synthesis of (Z)-organylthioenynes via hydrothiolation of buta-1,3-diynes: a comparative study using NaOH or TBAOH as base
949
Improvement in the synthesis of metallophthalocyanines using microwave irradiation
950
Improvement in the thermal shock resistance of alumina through the addition of submicron-sized aluminium nitride particles
951
Improvement in the Transmission Coefficient of Photonic Crystal Power Splitter using Selective Optofluidic Infiltration
952
Improvement in the tribological characteristics of Si-DLC coating by laser surface texturing under oil-lubricated point contacts at various temperatures
953
Improvement in the tribological performances of Si3N4, SiC and WC by graphite-like carbon films under dry and water-lubricated sliding conditions
954
Improvement in thermal fatigue behavior of Si–Mo–Cr coated C/C composites through modification of the C/C-coating interface
955
Improvement in thermal stability and catalytic activity of titanium species in mesoporous titanosilicates by addition of ammonium salts
956
Improvement in thermal stability of NaA zeolite composite membrane by control of intermediate layer structure
957
Improvement in thermal stability of stainless steel supported silica membranes by the soaking–rolling method
958
Improvement in thermostability and psychrophilicity of psychrophilic alanine racemase by site-directed mutagenesis
959
Improvement in three-month angiographic outcome suggested after primary angioplasty for acute myocardial infarction (Zwolle trial) compared with successful thrombolysis (APRICOT trial)
960
Improvement in tolerance to salt stress during tomato cultivation
961
Improvement in tool life of electroplated diamond tools by Ni-based carbon nanotube composite coatings
962
Improvement in toughness of carbon/carbon composites using multiple matrixes
963
Improvement in toughness of poly(l-lactide) (PLLA) through reactive blending with acrylonitrile–butadiene–styrene copolymer (ABS): Morphology and properties
964
Improvement in transdermal drug delivery performance by graphite oxide/temperature-responsive hydrogel composites with micro heater
965
Improvement in transmittance and decay time of PbWO4 scintillating crystals by La-doping
966
Improvement in transmittance and decay time of PbWO4 scintillating crystals by La-doping
967
Improvement in tribocorrosion behavior of 304 stainless steel by surface mechanical attrition treatment
968
Improvement in tribological properties of atmospheric plasma-sprayed WC–Co coating followed by Cu electrochemical impregnation
969
Improvement in tribological properties of HVOF sprayed WC–Co coatings using electroless Ni–P coated feedstock powders
970
Improvement in tribological properties of plasma-sprayed Cr3C2–NiCr coating followed by electroless Ni-based alloy plating
971
Improvement in understanding of natural circulation phenomena in water cooled nuclear power plants
972
Improvement in video inpainting in presence of moving subjects
973
Improvement in visibility of an in-focus reconstructed image in digital holography by reduction of the influence of out-of-focus objects
974
Improvement in Wash Fastness of Dyed Silk by Aftertreatment with ‎Commercial Syntan/Metal Salts
975
Improvement in water and oil absorbency of textile substrate by atmospheric pressure cold plasma treatment
976
Improvement in wear resistance of hyper-eutectic AlSi cast alloy by laser surface remelting
977
Improvement in wear resistance of plasma sprayed yttria stabilized zirconia coating using nanostructured powder
978
Improvement in wear resistance of TiNi-based composites by hot isostatic pressing
979
Improvement in wear resistance of TiNi-based composites by hot isostatic pressing
980
Improvement in working memory is not related to increased intelligence scores
981
Improvement Initiatives for Reprocessing and Sterilization of Reusable Medical Devices in a Community Hospital
982
Improvement Least-Distance Measure Model with Coplanar DMU on Strong Hyperplanes
983
Improvement mechanism of photoluminescence in iron-passivated porous silicon
984
Improvement mechanism of resistance random access memory with supercritical CO2 fluid treatment
985
Improvement microwave dielectric properties of Zn2SnO4 ceramics by substituting Sn4+ with Ti4+
986
Improvement of (La0.74Bi0.10Sr0.16)MnO3–Bi1.4Er0.6O3 composite cathodes for intermediate-temperature solid oxide fuel cells
987
Improvement of ‘duplex’ PVD coatings for HSS cutting tools by ion mixing
988
Improvement of ‘duplex’ PVD coatings for HSS cutting tools by PFPE (perfluorpolyether ‘Z-DOL’)
989
Improvement of “integrated function algorithm” for binarization of document images
990
Improvement of 12 V overcharge behavior of LiCoO2 cathode material by LiNi0.8Co0.1Mn0.1O2 addition in a Li-ion cell
991
Improvement of 192Ir and 152Eu gamma-ray calibration energies by using a self-calibration procedure
992
Improvement of 192Ir and 152Eu gamma-ray calibration energies by using a self-calibration procedure
993
Improvement of 1D off-axis computer-generated holograms
994
Improvement of 319 aluminum alloy casting durability by high temperature solution treatment
995
Improvement of 3-D FEM Coupled Model on Strip Crown in Hot Rolling Original Research Article
996
Improvement of 5-fluorouracil chemosensitivity in colorectal cancer cells by siRNA-mediated silencing of STAT6 oncogene
997
Improvement of 9Cr-ODS martensitic steel properties by controlling excess oxygen and titanium contents
998
Improvement of a 3D CTM and a 4D variational data assimilation on a vector machine CRAY J90 through a multitasking strategy Original Research Article
999
Improvement of a bit error rate measuring system for high-temperature superconducting circuits
1000
Improvement of a chain-hardening furnace by computational fluid dynamics (CFD) simulation