بر اساس عنوان

1
Optimisation of the micro-climate in solar collectors
2
Optimisation of the microencapsulation of tuna oil in gelatin–sodium hexametaphosphate using complex coacervation
3
Optimisation of the microwave-assisted extraction of pigments from paprika (Capsicum annuum L.) powders
4
Optimisation of the microwave-assisted extraction process for four main astragalosides in Radix Astragali
5
Optimisation of the mine closure process
6
Optimisation of the new low surface field accelerating structure for the ILC
7
Optimisation of the new low surface field accelerating structure for the ILC
8
Optimisation of the optical scheme of a dual-beam thermal lens spectrometer using expert estimation Original Research Article
9
Optimisation of the P2 pharmacophore in a series of thrombin inhibitors: Ion-dipole interactions with lysine 60G
10
Optimisation of the parameters of an extended defect model applied to non-amorphizing implants
11
Optimisation of the pigeon pea dehulling process
12
Optimisation of the preparation of an Al-pillared clay: thermal stability and surface acidity
13
OPTIMISATION OF THE PROCESSING VARIABLES for HIGH POLYMER LOADING IN COMPRESSED WOOD using RESPONSE SURFACE METHODOLOGY
14
Optimisation of the properties of siloxane coatings as anti-biofouling coatings: Comparison of PACVD and hybrid PACVD–PVD coatings
15
Optimisation of the protrusion geometry in Comeld™ joints
16
Optimisation of the range of an optical fibre pH sensor using feed-forward artificial neural network
17
Optimisation of the reaction conditions for the production of cross-linked starch with high resistant starch content
18
Optimisation of the reaction heat treatment cycle of internal tin and bronze Nb3Sn strands for ITER
19
Optimisation of the removal of toxic mono-valent anions from water supplies in the ion exchange membrane bioreactor Original Research Article
20
Optimisation of the secondary ball mill using an on-line ball and pulp load sensor – The Sensomag
21
Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology
22
Optimisation of the selectivity of a pulsed flame photometric detector for unknown compound screening
23
Optimisation of the separation of anions by ion chromatography–capillary electrophoresis using indirect UV detection
24
Optimisation of the separation of four major neutral glycosphingolipids: application to a rapid and simple detection of urinary globotriaosylceramide in Fabry disease
25
Optimisation of the separation of herbicides by linear gradient high performance liquid chromatography utilising artificial neural networks
26
Optimisation of the shear stress transfer in structural bonded assemblies using a curved bonded joint geometry
27
Optimisation of the SIMPEDS personal sampling cyclone to the ISO sampling convention for thoracic dust
28
Optimisation of the sizes of bonded composite repair in aircraft structures
29
Optimisation of the solvent extraction of bioactive compounds from Parkia speciosa pod using response surface methodology
30
Optimisation of the solvent extraction of phenolic antioxidants from fruits of Euterpe oleracea using Response Surface Methodology
31
Optimisation of the spatial linearity in backgammon-type multi-wire gas proportional counters—The relevance of charge cloud distribution
32
Optimisation of the spatial linearity in backgammon-type multi-wire gas proportional counters—The relevance of charge cloud distribution
33
Optimisation of the spectral pre-treatments used for Iberian pig fat NIR calibrations
34
Optimisation of the storage of natural freshwaters before organotin speciation
35
Optimisation of the structure of the clinical laboratory
36
Optimisation of the superplastic forming of a dental implant for bone augmentation using finite element simulations
37
Optimisation of the superplastic forming of aluminium alloys
38
Optimisation of the Surface Electrostatics as a Strategy for Cold Adaptation of Uracil-DNA N-glycosylase (UNG) from Atlantic Cod (Gadus morhua)
39
Optimisation of the synthesis of a water-soluble sulfur black dye
40
Optimisation of the synthesis of glass-ceramic matrix biocomposites by the “response surface methodology”
41
Optimisation of the temperature profile in bread baking Original Research Article
42
Optimisation of the thermodynamic and phase diagram data in the ternary As-Ga-In system
43
Optimisation of the thermodynamic and phase diagram data in the ternary As-Ga-In system
44
Optimisation of the throttling system in a CO2 refrigerating machine
45
Optimisation of the two-phase dry-thermophilic anaerobic digestion process of sulphate-containing municipal solid waste: Population dynamics
46
Optimisation of the vibrational response of ultrasonic cutting systems
47
Optimisation of the wells placement in gas reservoirs using SIMPLEX method
48
Optimisation of the wire-shadow TEM cross-section preparation technique
49
Optimisation of the wire-shadow TEM cross-section preparation technique
50
Optimisation of thermal lens microscopic measurements in a microchip Original Research Article
51
Optimisation of thermoelectric green tape characteristics made by the tape casting method
52
Optimisation of time/temperature treatment, for heat treated soft wheat flour Original Research Article
53
Optimisation of tool life and productivity when end milling Inconel 718TM
54
Optimisation of total phenolic acids extraction from mandarin peels using microwave energy: The importance of the Maillard reaction Original Research Article
55
Optimisation of Transient Green Fluorescent Protein (GFP) Gene Expression in Phalaenopsis Violacea Orchid Mediated by Agrobacterium Tumefaciens-mediated Transformation System
56
Optimisation of Trapped Vortex Cavity for Airfoil Separation Control
57
Optimisation of treatment conditions of wheat straw with lime: Effect of concentration, moisture content and treatment time on chemical composition and in vitro digestibility
58
Optimisation of tree mortality models based on growth patterns
59
Optimisation of tree mortality models based on growth patterns
60
Optimisation of tree path pipe network with nonlinear optimisation method
61
Optimisation of turbine-induced damping for an OWC wave energy converter using a RANS–VOF numerical model
62
Optimisation of turbulence wire spacing in falling films performed with OpenFOAM
63
Optimisation of two-photon induced cleavage of molecular linker systems for drug delivery
64
Optimisation of ultrafiltration of a highly viscous protein solution using spiral-wound modules Original Research Article
65
Optimisation of ultrasonic-assisted extraction of antioxidant compounds from Artemisia absinthium using response surface methodology
66
Optimisation of ultrasonic-assisted extraction of phenolic compounds, antioxidants, and anthocyanins from sugar beet molasses
67
Optimisation of Ultrasonic-assisted Protein Extraction from Brewerʹs Spent Grain
68
Optimisation of ultrasound assisted extraction of phenolic compounds from Sparganii rhizoma with response surface methodology
69
Optimisation of ultrasound assisted extraction of phenolic compounds from Sparganii rhizoma with response surface methodology
70
Optimisation of ultrasound-assisted emulsification microextraction method with solidification of floating organic drop for the analysis of cork taint responsible compounds in wine
71
Optimisation of ultrasound-assisted enzymatic extraction of arabinoxylan from wheat bran
72
Optimisation of ultrasound-assisted extraction conditions for maximal recovery of active monacolins and removal of toxic citrinin from red yeast rice by a full factorial design coupled with response surface methodology
73
Optimisation of ultrasound-assisted extraction of natural pigment from annatto seeds by response surface methodology (RSM)
74
Optimisation of ultrasound-assisted extraction of oil from papaya seed by response surface methodology: Oil recovery, radical scavenging antioxidant activity, and oxidation stability
75
Optimisation of ultrasound-assisted extraction of phenolic compounds from wheat bran
76
Optimisation of ultrasound-assisted reverse micelles dispersive liquid–liquid micro-extraction by Box–Behnken design for determination of acetoin in butter followed by high performance liquid chromatography
77
Optimisation of Urea Complexation by Box-Behnken Design
78
Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete
79
Optimisation of washing cycle on ultrafiltration membranes used in treatment of metalworking fluids Original Research Article
80
Optimisation of water usage in a brewery clean-in-place system using reference nets
81
Optimisation of wind turbine blades
82
Optimisation of wire-cut EDM process parameter by Grey-based response surface methodology
83
Optimisation of wort volatile analysis by headspace solid-phase microextraction in combination with gas chromatography and mass spectrometry
84
Optimisation of xanthan gum production by palm date (Phoenix dactylifera L.) juice by-products using response surface methodology
85
Optimisation of X-ray proportional counters for Scanning Sky Monitor (SSM) on ASTROSAT Original Research Article
86
Optimisation of ZnO:Al films by change of sputter gas pressure for solar cell application
87
Optimisation of β-glucosidase entrapment in alginate and polyacrylamide gels
88
Optimisation of β-glucuronidase production from a newly isolated Ganoderma applanatum
89
Optimisation of the azinobis-3-ethyl-benzothiazoline-6-sulphonic acid radical scavenging assay for physiological studies of total antioxidant activity in woody plant germplasm
90
Optimisation on bioleaching of incinerator fly ash by Aspergillus niger – use of central composite design
91
Optimisation or satiation, testing diet selection rules in goats
92
Optimisation parameters for the extrusion of thin YSZ tubes for SOFC electrolytes
93
Optimisation procedure for the inhibitive determination of chromium(III) using an amperometric tyrosinase biosensor
94
Optimisation procedure for the inhibitive determination of chromium(III) using an amperometric tyrosinase biosensor Original Research Article
95
Optimisation steps of an innovative air sampling method for semi volatile organic compounds
96
Optimisation strategies for the preparation of bipolar membranes with reduced salt ion leakage in acid–base electrodialysis
97
Optimisation study of α-cyclotron production of At-211/Po-211g for high-LET metabolic radiotherapy purposes
98
Optimisation technique for calculating water transport in a box model (Gippsland Lakes, Victoria, Australia)
99
Optimisation technique for stepwise gradient elution in reversed-phase liquid chromatography
100
Optimisation techniques for minimising saw teeth deflection and lumber thickness variation
101
Optimisation techniques for reducing global bus switching activity in realisations of sum-of-products computations in DSP systems
102
Optimisation under hybrid uncertainty
103
Optimisation using a surface response methodology of a system with drift: Application to a flow analysis system with electrochemical detection Original Research Article
104
Optimisation using a surface response methodology of a system with drift: Application to a flow analysis system with electrochemical detection Original Research Article
105
Optimisation versus certainty: understanding the issue of heterogeneity in economic evaluation
106
Optimisation with genetic algorithm of the acoustic performance of T-shaped noise barriers with a reactive top surface
107
Optimisation, characterisation and quantification of phenolic compounds in olive cake
108
Optimisation, scope and limitations of the synthesis of 5-aminoindolizines from oxazolo[3,2-a]pyridinium salts
109
Optimisation-based control coordination of PSSs and FACTS devices for optimal oscillations damping in multi-machine power system
110
Optimisation-based design method for membrane-assisted separation processes
111
Optimisation-based scheduling: A discrete manufacturing case study
112
Optimisation-based strategy for shunt active power filter control under non-ideal supply voltages
113
Optimisation-oriented modelling of the NOx emissions of a Diesel engine
114
OPTIMISE WHAT YOU HAVE FIRST! LOW COST UPGRADING OF PLANTS FOR IMPROVED NUTRIENT REMOVAL
115
OPTIMISE WHAT YOU HAVE FIRST! LOW COST UPGRADING OF PLANTS FOR IMPROVED NUTRIENT REMOVAL
116
Optimised activation of bentonite for toluene adsorption
117
Optimised affinity purification of polyclonal antibodies from hyper immunised ovine serum using a synthetic Protein A adsorbent, MAbsorbent® A2P
118
Optimised ASIC Ready FPGA Design
119
Optimised axially-symmetric kinematic dynamos
120
Optimised BNCT facility based on a compact D-D neutron generator
121
Optimised boundary compact finite difference schemes for computational aeroacoustics
122
Optimised cantilever biosensor with piezoresistive read-out
123
Optimised cantilever biosensor with piezoresistive read-out
124
Optimised cantilever biosensor with piezoresistive read-out
125
Optimised chemical synthesis of 5-substituted UDP-sugars and their evaluation as glycosyltransferase inhibitors Original Research Article
126
Optimised chromatographic method for the measurement of selected polychlorinated biphenyls in ambient air
127
Optimised chromatographic method for the measurement of selected polychlorinated biphenyls in ambient air Original Research Article
128
Optimised coagulation using aluminium sulfate for the removal of dissolved organic carbon Original Research Article
129
Optimised concentration and purification of retroviruses using membrane chromatography
130
Optimised conditions for styrene syntheses using Suzuki–Miyaura couplings and catalyst-ligand-base pre-mixes
131
Optimised Conjunctive Control Rules for a System of Water Supply Sources: Roadford Reservoir System (U.K.)
132
Optimised cure cycles for resin transfer moulding
133
Optimised desalination of seawater by a PV powered reverse osmosis plant for a decentralised coastal water supply Original Research Article
134
Optimised design and dimensioning of low-technology wind pumps
135
Optimised design of ECL gates with power constraint
136
Optimised design of mandrels after fatigue failure
137
Optimised design of nested circular tube energy absorbers under lateral impact loading
138
Optimised design of nested circular tube energy absorbers under lateral impact loading
139
Optimised design of nested oblong tube energy absorbers under lateral impact loading
140
Optimised determination of clobazam in human plasma with extraction and high-performance liquid chromatography analysis
141
Optimised determinations of water in ethanol by encoded photometric near-infrared spectroscopy: A special case of sequential standard addition calibration Original Research Article
142
Optimised diffusion-weighting for measurement of apparent diffusion coefficient (ADC) in human brain
143
Optimised Dynamic Kinetic Resolution of benzoin by a chemoenzymatic approach in 2-MeTHF
144
Optimised extraction of microcystins from field samples — a comparison of different solvents and procedures
145
Optimised filtering for improved energy and position resolution in position-sensitive TES based X-ray detectors
146
Optimised filtering for improved energy and position resolution in position-sensitive TES based X-ray detectors
147
Optimised form of acceleration correction algorithm within SPH-based simulations of impact mechanics
148
OPTIMISED FORMULATION OF METOCLOPRAMIDE ORALLY DISINTEGRATING TABLET
149
Optimised glucocorticoid therapy: the sharpening of an old spear
150
Optimised hydrodynamic parameters for the design of photobioreactors using computational fluid dynamics and experimental validation
151
Optimised hydrothermal synthesis of multi-dimensional hybrid coordination polymers containing flexible organic ligands
152
Optimised immunofluorescence procedure for enumeration of Cryptosporidium parvum oocyst suspensions
153
Optimised in vitro applicable loads for the simulation of lateral bending in the lumbar spine
154
Optimised input filter design and low-loss switching techniques for a practical matrix converter
155
Optimised k0-instrumental neutron activation method using the TRIGA MARK I IPR-R1 reactor at CDTN/CNEN, Belo Horizonte, Brazil
156
Optimised k0-instrumental neutron activation method using the TRIGA MARK I IPR-R1 reactor at CDTN/CNEN, Belo Horizonte, Brazil
157
Optimised measurement strategies in the storm deposition and resuspension tests
158
Optimised method for estimating directional driving rain from synoptic observation data
159
Optimised method for the routine determination of Technetium-99 in environmental samples by liquid scintillation counting Original Research Article
160
Optimised Methods for Quantitative Analysis of Solasodine and its Glycoside Solamargine by High Performance Liquid Chromatography
161
Optimised model for community-based hybrid energy system
162
Optimised Muskingum-Cunge solution method for solute transport with equilibrium Freundlich reactions
163
Optimised N-acetyl-d-lactosamine synthesis using Thermus thermophilus β-galactosidase in bio-solvents
164
Optimised nano-formulation on the bioavailability of hydrophobic polyphenol, curcumin, in freely-moving rats
165
Optimised NH3 injection in CFB boilers
166
Optimised non-invasive method to determine 238U-captures-to-total-fissions in reactor fuel
167
Optimised non-invasive method to determine 238U-captures-to-total-fissions in reactor fuel
168
Optimised off-line SPE–GC–FID method for the determination of mineral oil saturated hydrocarbons (MOSH) in vegetable oils
169
Optimised operation and design of alternating activated sludge processes for N-removal
170
Optimised performance of the backward longswing on rings
171
Optimised placement of control and protective devices in electric distribution systems through reactive tabu search algorithm
172
Optimised plasma stabilisation at TEXTOR with an advanced, real-time digital control scheme
173
Optimised power distribution to minimise power rating of paralleled rectifiers
174
Optimised procedure for the calibration of the force platform location
175
Optimised procedures for the one-pot selective syntheses of indoxyls and 4-quinolones by a carbonylative Sonogashira/cyclisation sequence Original Research Article
176
Optimised process for fabricating functional silicon nanowhisker arrays
177
Optimised product and water recovery from batch-production rinsing waters
178
Optimised purification and characterisation of lipid transfer protein 1 (LTP1) and its lipid-bound isoform LTP1b from barley malt
179
Optimised PWL recursive approximation and its application to neuro-fuzzy systems
180
Optimised quantification of the antiyeast activity of different barley malts towards a lager brewing yeast strain Original Research Article
181
Optimised rate-responsive pacing does not improve either right ventricular haemodynamics or exercise capacity in adults with a systemic right ventricle
182
Optimised relay selection for route discovery in reactive routing
183
Optimised score plot by principal components of predictions
184
Optimised sensor arrays with chromatographic preseparation: characterisation of alcoholic beverages
185
Optimised sensor selection for control and fault tolerance of electromagnetic suspension systems: A robust loop shaping approach
186
Optimised simultaneous multi-element analysis of environmental slurry samples by inductively coupled plasma atomic emission spectrometry using a segmented array charge-coupled device detector
187
Optimised solid phase synthesis of a cystine-linked peptide-PNA chimera
188
Optimised synthesis and photochemistry of antenna-sensitised 1-acyl-7-nitroindolines
189
Optimised synthesis of diamino-triazinylmethyl benzoates as inhibitors of Rad6B ubiquitin conjugating enzyme
190
Optimised techniques for mitotic studies in sweet cherry (P. avium L.)
191
Optimised technologies for cryogenic grinding
192
Optimised temperature modulation of metal oxide micro-hotplate gas sensors through multilevel pseudo random sequences
193
Optimised testing strategies for skin sensitization – The LLNA and beyond
194
Optimised time-frequency domain layer-peeling algorithm to reconstruct fibre Bragg gratings
195
Optimised ultrasonic-assisted extraction of flavonoids from Folium eucommiae and evaluation of antioxidant activity in multi-test systems in vitro
196
Optimised weighted-resistor digital to analogue converter
197
Optimising a general repair kit problem with a service constraint
198
Optimising a muon spectrometer for measurements at the ISIS pulsed muon source
199
Optimising a muon spectrometer for measurements at the ISIS pulsed muon source
200
Optimising a production process by a neural network/genetic algorithm approach
201
Optimising a rapid chilling system for lamb carcasses Original Research Article
202
Optimising an observational water monitoring network for Archipelago Sea, South West Finland
203
Optimising anti-spam filters with evolutionary algorithms
204
Optimising aroma quality in curry sauce products using in vivo aroma release measurements
205
Optimising bandwidth of ABR sources
206
Optimising basic edge detectors for particular acquisition systems
207
Optimising biodiversity assessments by volunteers: The application of occupancy modelling to large-scale amphibian surveys
208
Optimising biological N2 fixation by legumes in farming systems
209
Optimising caesarean-section rates in west Africa
210
Optimising capercailzie habitat in commercial forestry plantations
211
Optimising catalytic properties of supported sulfonic acid catalysts Original Research Article
212
Optimising cell temperature and dispersion field strength for the screening for putrescine and cadaverine with thermal desorption-gas chromatography–differential mobility spectrometry Original Research Article
213
Optimising changeover designs using the average efficiency factors
214
Optimising classical filter sensitivity/tolerance response using nomographs
215
Optimising clinical practice in cancer genetics with cultural competence: lessons to be learned from ethnographic research with Chinese-Australians
216
Optimising code generation with haggies Original Research Article
217
Optimising conditions for learning sociocultural competencies for success
218
Optimising conditions for production of 6He, 8Li, 10Be and 12B radioactive ion beams with the SOLEROO separator
219
Optimising conditions for production of 6He, 8Li, 10Be and 12B radioactive ion beams with the SOLEROO separator
220
Optimising container transfers at multimodal terminals
221
Optimising control of an agricultural weed in sheep-production pastures
222
Optimising Cutinase Enzyme Recovery in Thermo-Induced Phase Separation of LS54/DX ATPS by Enhanced Volume Exclusion Effect
223
Optimising cyanide:oxygen ratios in gold cip/cil circuits
224
Optimising daylighting in high-rise commercial developments in SE Asia and the use of computer programmes as a design tool
225
Optimising design of continuous grinding mill-classifier systems
226
Optimising diffusion bonding parameters to maximize the strength of AA6061 aluminium and AZ31B magnesium alloy joints
227
Optimising DNA binding to carbon nanotubes by non-covalent methods Original Research Article
228
Optimising drainage from sugar cane fields using a onedimensional flow routing model: a case study from Ripple Creek, North Queensland
229
Optimising drying conditions for maximum nutritional quality and bioactivity of Cucurbita pepo L var. fastigata flesh and seeds
230
Optimising dynamic graphical models for video content analysis
231
Optimising energy consumption in SWRO systems with brine concentrators
232
Optimising estimates of mesospheric neutral wind using the TIGER SuperDARN radar Original Research Article
233
Optimising flat-walled multi-layered anechoic linings using evolutionary algorithms
234
Optimising flax production in the South Atlantic region of the USA
235
Optimising food composition data flow within the UK food supply chain and to external stakeholders
236
Optimising food composition data flow within the UK food supply chain and to external stakeholders
237
Optimising frame structures by different strategies of genetic algorithms
238
Optimising froth condition and recovery for a nickel ore
239
Optimising FSW process parameters to minimise defects and maximise fatigue life in 5083-H321 aluminium alloy
240
Optimising functional properties during preparation of cowpea protein concentrate
241
Optimising Fungicide Applications on Winter Wheat using Genetic Algorithms
242
Optimising GPR modelling: A practical, multi-threaded approach to 3D FDTD numerical modelling
243
Optimising growth conditions for the pectinolytic activity of Kluyveromyces wickerhamii by using response surface methodology
244
Optimising H2 production from model biogas via combined steam reforming and CO shift reactions
245
Optimising heat recirculating combustion systems for thermoelectric converters
246
Optimising ICT effectiveness in instruction and learning: multilevel transformation theory and a pilot project in secondary education
247
Optimising immunosuppression
248
Optimising inhibitors of Trypanothione reductase using solid-phase chemistry
249
Optimising investments from elephant tourist revenues in the Maputo Elephant Reserve, Mozambique
250
Optimising k-means clustering results with standard software packages
251
Optimising location of unified power flow controllers by means of improved evolutionary programming
252
Optimising location of unified power flow controllers using the method of augmented Lagrange multipliers
253
Optimising low acoustic impedance back-fill material wave barrier dimensions to shield structures from ground borne high speed rail vibrations
254
Optimising mechanical properties in alpha+beta titanium alloys
255
Optimising mechanical properties in alpha+beta titanium alloys
256
Optimising memory usage in n-tuple neural networks Original Research Article
257
Optimising methods for determining RER status in colorectal cancers
258
Optimising mixing and nutrient removal in membrane bioreactors: CFD modelling and experimental validation Original Research Article
259
Optimising mobile phase composition, its flow-rate and column temperature in HPLC using taboo search
260
Optimising multicast structures for grid computing
261
Optimising multi-objective control methodology of a hydrogen powered car
262
Optimising nano-carbide precipitation in tool steels
263
Optimising natural organic matter removal from low turbidity waters by controlled pH adjustment of aluminium coagulation
264
Optimising neutron polarisers—measuring a single cross-section
265
Optimising neutron polarisers—measuring a single cross-section
266
Optimising neutron polarizers—measuring the flipping ratio and related quantities
267
Optimising neutron polarizers—measuring the flipping ratio and related quantities
268
Optimising oil spill dispersants as a function of oil type and weathering degree: a multivariate approach using partial least squares (PLS)
269
Optimising open porous foam for acoustical and vibrational performance
270
Optimising operation of a biological wastewater treatment application
271
Optimising operation of an integrated membrane system (IMS) — A Box–Behnken approach Original Research Article
272
Optimising optical port size on underwater marine instruments to maximise biofouling resistance
273
Optimising oral fluid collection from groups of pigs: Effect of housing system and provision of ropes
274
Optimising oscillation frequency in oscillatory tillage
275
Optimising oxygen-sensitivity of optical sensor using pyrene carboxylic acid by myristic acid co-chemisorption onto anodic oxidized aluminium plate
276
Optimising PCM thermal storage systems for maximum energy storage effectiveness
277
Optimising polarised neutron scattering measurements—XYZ and polarimetry analysis
278
Optimising polarised neutron scattering measurements—XYZ and polarimetry analysis
279
Optimising production planning systems
280
Optimising reintroduction success by delayed dispersal: Is the release protocol important for hare-wallabies? Original Research Article
281
Optimising renovation strategies for energy conservation in housing
282
Optimising resolution for a preparative separation of Chinese herbal medicine using a surrogate model sample system
283
Optimising results with tissue expansion: 10 simple rules for successful tissue expander insertion
284
Optimising reversed-phase liquid chromatographic separation of an acidic mixture on a monolithic stationary phase with the aid of response surface methodology and experimental design
285
Optimising risk reduction: An expected utility approach for marginal risk reduction during regulatory decision making
286
Optimising risk reduction: An expected utility approach for marginal risk reduction during regulatory decision making
287
Optimising silage harvesting plans in a grass and grazing simulation using the revised simplex method and a genetic algorithm
288
Optimising solar energy in buildings via data sharing during design
289
Optimising solar photocatalytic mineralisation of pesticides by adding inorganic oxidising species; application to the recycling of pesticide containers
290
Optimising sorting and washing of home-grown maize to reduce fumonisin contamination under laboratory-controlled conditions
291
Optimising spatial mergers: commercial and regulatory perspectives
292
Optimising stability bounds of finite-precision controller structures for sampled-data systems in the δ-operator domain
293
Optimising stability bounds of finite-precision controller structures for sampled-data systems in the δ-operator domain
294
Optimising stereo baited underwater video for sampling fish and invertebrates in temperate coastal habitats
295
Optimising strategic information system development
296
Optimising surgical treatment of rectal cancer
297
Optimising System Continuity in Preventive Maintenance Schedules Based on Integrated Failure Mode and Spare Part Inventory Modelling
298
Optimising the adjustment of label-recommended dose rate for orchard spraying
299
Optimising the application of the Hough transform for automatic feature extraction from geoscientific images
300
Optimising the assessment of cerebral autoregulation from black box models
301
Optimising the bioactivity of alkaline-treated titanium alloy
302
Optimising the biogas production from leather fleshing waste by co-digestion with MSW
303
Optimising the chemical bonding between silanised silica nanofiller and natural rubber and assessing its effects on the properties of the rubber
304
Optimising the Conceptualisation of Context; Comment on “Stakeholder Perspectives of Attributes and Features of Context Relevant to Knowledge Translation in Health Settings: A Multi-country Analysis”
305
Optimising the cutting of wood fibre plates in the hardboard industry
306
Optimising the design and operation of semi-continuous affinity chromatography for clinical and commercial manufacture
307
Optimising the design of a piston-ring pack using DoE methods
308
Optimising the design of building envelopes for thermal performance
309
Optimising the design of building envelopes for thermal performance
310
Optimising the design of fume extraction hoods using a combination of engineering and CFD modelling
311
Optimising the design of preliminary toxicity studies for pharmaceutical safety testing in the dog
312
Optimising the determination of maize endosperm vitreousness by a rapid non-destructive image analysis technique
313
Optimising the dewatering behaviour of clay tailings through interfacial chemistry, orthokinetic flocculation and controlled shear
314
Optimising the distributed execution of join queries in polynomial time
315
Optimising the economic viability of grid-connected photovoltaic systems
316
Optimising the environmental benefits of emission reductions from UK coal- and oil-fired power stations: a critical loads approach
317
Optimising the flow of information within a C3I network
318
Optimising the four-arc approximation to ellipses Original Research Article
319
Optimising the Fronthaul Connectivity and Backhaul Utilization via DWDM using BTS Hotel Concept
320
Optimising the Gaia scanning law for relativity experiments
321
Optimising the gas-injection moulding of an automobile plastic cover using an experimental design procedure
322
Optimising the inactivation of grape juice spoilage organisms by pulse electric fields
323
Optimising the interfacial response of glass fibre composites with a functional nanoscale plasma polymer coating
324
Optimising the legume symbiosis in stressful and competitive environments within southern Australia—some contemporary thoughts
325
Optimising the legume symbiosis in stressful and competitive environments within southern Australia—some contemporary thoughts
326
Optimising the LHCb VELO detector
327
Optimising the LHCb VELO detector
328
Optimising the locations of thermally sensitive equipment in an aircraft crown compartment
329
Optimising the mutual information of ecological data clusters using evolutionary algorithms
330
Optimising the number of isolates to be used to estimate growth parameters of mycotoxigenic species Original Research Article
331
Optimising the offtake of large herbivores from a multi-species community
332
Optimising the offtake of large herbivores from a multi-species community
333
Optimising the outcome after anastomotic posterior urethroplasty
334
Optimising the preparation of activated carbon from digested sewage sludge and coconut husk
335
Optimising the refrigeration cycle with a two-stage centrifugal compressor and a flash intercooler
336
Optimising the scheduling of spinning reserve considering the cost of interruptions
337
Optimising the sex ratio of translocation for genetic rescue as a function of invested resources
338
Optimising the sex ratio of translocation for genetic rescue as a function of invested resources
339
Optimising the strip geometry for very fine pitch silicon strip sensors
340
Optimising the strip geometry for very fine pitch silicon strip sensors
341
Optimising the success of random destructive searches: Lévy walks can outperform ballistic motions
342
Optimising the use of hyperspectral and LiDAR data for mapping reedbed habitats
343
Optimising the use of note-taking as an external cognitive aid for increasing learning
344
Optimising the variables when deep-drawing C.R.1 cups
345
Optimising the ventilation configuration of naturally ventilated livestock buildings for improved indoor environmental homogeneity
346
Optimising the visual feedback technique for improving upright stance maintenance by delaying its display: behavioural effects on healthy adults
347
Optimising three-band spectral indices to assess aerial N concentration, N uptake and aboveground biomass of winter wheat remotely in China and Germany
348
Optimising traffic signal settings for periods of time-varying demand
349
Optimising train movements through coast control using genetic algorithms
350
Optimising trans-national power generation and transmission investments: a Southern African example
351
Optimising transport efficiency and costs in Australian wood chipping operations
352
OPTIMISING TREATMENT SYSTEM for KENAF (Hibiscus cannabinus) PARTICLEBOARD WITH FIRE RETARDANTS
353
Optimising ultrasound-mediated gene transfer (sonoporation) in vitro and prolonged expression of a transgene in vivo: Potential applications for gene therapy of cancer
354
Optimising uniformity of InAs/(InGaAs)/GaAs quantum dots grown by metal organic vapor phase epitaxy
355
Optimising Up*/Down* Routing By Minimal Paths
356
Optimising ventilation-system design for a container-housed engine
357
Optimising water and phosphorus management in the urban environmental sanitation system of Hanoi, Vietnam
358
Optimising women’s diets. An examination of factors that promote healthy eating and reduce the likelihood of unhealthy eating
359
Optimising worked example instruction: Different ways to increase germane cognitive load
360
Optimisingwaiting: a view fromthe English National Health Service
361
Optimism after much pessimism: what next?: Commentary
362
Optimism and Coping with Unemployment among Hong Kong Chinese Women,
363
Optimism and economic choice
364
Optimism and immunity: Do positive thoughts always lead to positive effects?
365
Optimism and neuroticism as predictors of coping and adaptation in older women
366
Optimism and overconfidence in search
367
Optimism and pessimism as partially independent constructs: Relationship to positive and negative affectivity and psychological well-being
368
Optimism and pessimism as predictors of work disability with a diagnosis of depression: A prospective cohort study of onset and recovery
369
Optimism and pessimism: Associations to coping and anger-reactivity
370
Optimism and resources: Effects on each other and on health over 10 years
371
Optimism and risk for job burnout among working college students: stress as a mediator
372
Optimism balanced by global issues at World Health Assembly
373
OPTIMISM BIAS ABOUT ENVIRONMENTAL DEGRADATION: THE ROLE OF THE RANGE OF IMPACT OF PRECAUTIONS
374
Optimism effects on cellular immunity: testing the affective and persistence models
375
Optimism effects on cellular immunity: testing the affective and persistence models
376
Optimism for perilous times: A survey of American Association of Obstetricians and Gynecologists Foundation and Reproductive Scientist Development Program postdoctoral research fellows, ,
377
Optimism measured pre-operatively is associated with reduced pain intensity and physical symptom reporting after coronary artery bypass graft surgery
378
Optimism over vaccines administered via mucosal surfaces
379
Optimism when winning and cautiousness when losing promote cooperation in the spatial prisoner’s dilemma game
380
Optimism, anxiety, and coping in parents of children hospitalized for spinal surgery
381
Optimism, dietary habits, body mass index and smoking among young Finnish adults
382
Optimism, education and industrial developmen
383
Optimism, pessimism and “fighting spirit”: a new approach to assessing expectancy and adaptation
384
Optimism, pessimism and the compensating income variation of cardiovascular disease: A two-tiered quality of life stochastic frontier model
385
Optimism, pessimism, affectivity, and psychological adjustment in US and Korea: a test of a mediation model
386
Optimism, pessimism, and neuropsychological performance across semiology-based subtypes of psychogenic nonepileptic seizures
387
Optimism, Pessimism, and Precompetition Anxiety in College Athletes
388
Optimism, pessimism, and the complexity of narcissism
389
Optimism, Pessimism, and the Direction of Self–Other Comparisons
390
Optimism, religiosity, and neuroticism: a cross-cultural study
391
Optimism, self-esteem, mood and subjective health
392
Optimism/pessimism and information-processing styles: can their influences be distinguished in predicting psychological adjustment?
393
Optimistic and pessimistic decision making with dissonance reduction using interval-valued fuzzy sets
394
Optimistic and Pessimistic Fuzzy Data Envelopment Analysis: Empirical Evidence from Tehran Stock Market
395
Optimistic bias in adolescent and adult smokers and nonsmokers
396
Optimistic Bias in Physical Activity: When Exercise Flows into Addiction
397
Optimistic biases in observational learning of value
398
Optimistic explanatory style and dispositional optimism in HIV-infected men
399
Optimistic Fair Exchange in a Multi-user Setting
400
Optimistic Implementation of Supply Chain Management in Small & Medium Enterprise: Approach using Grey Relational Analysis (GRA)
401
Optimistic, defensive-pessimistic, impulsive and self-handicapping strategies in university environments
402
Optimizating the seats surrounding the platform in a recital hall when considering source directivity
403
Optimization — the basis of code-making and reliability verification
404
Optimization ، defect identification using distributed evolutionary algorithms
405
Optimization about multilayer laminated film and getter device materials of vacuum insulation panel for using at high temperature
406
Optimization actions for irrigation by the Howell-Bunger valves
407
Optimization activities on design studies of LHD-type reactor FFHR
408
Optimization algorithm based on densification and dynamic canonical descent
409
Optimization Algorithm for Fault Location in Transmission Lines Considering Current Transformers Saturation
410
Optimization algorithm for reverse osmosis desalination economics
411
Optimization algorithms exploiting unitary constraints
412
Optimization algorithms for identification inverse problems with the boundary element method
413
Optimization algorithms for physically non-linear structures
414
Optimization algorithms of operative control in water distribution systems
415
Optimization analysis for design and planning of multi-project programs
416
Optimization analysis of an alternate magnetohydrodynamic generator
417
Optimization analysis of dual-purpose systems Original Research Article
418
Optimization and analysis aid via data-mining for simulated production systems
419
Optimization and Analysis of Bioethanol Production from Cassava Starch Hydrolysis
420
Optimization and Analysis of Central Bank Losses for Oil Exporting Economy, Application of DSGE Model (Case study of Iranian Economy)
421
Optimization and Analysis of Cutting Tool Geometrical Parameters using Taguchi Method
422
Optimization and analysis of exergy, economic and environmental of gas turbine (Case study: Kerman plant combined cycle)
423
Optimization and analysis of shock wave/boundary layer interaction for drag reduction by Shock Control Bump
424
Optimization and Analysis of Supply Chain Management Performance by Improving Inventory Management Model in Residential Construction
425
Optimization and analysis of the profitability of tariff structures with two-part tariffs
426
Optimization and antibacterial activity of Bacteriocin produced by Lactococcus lactis isolates from dairy products against Foodborne Pathogens
427
Optimization and application of a dithiobis-succinimidyl propionate-modified immunosensor platform to detect Listeria monocytogenes in chicken skin
428
Optimization and application of accelerated solvent extraction for rapid quantification of PCBs in food packaging materials using GC-ECD
429
Optimization and application of high-resolution gas chromatography with ion trap tandem mass spectrometry to the determination of polychlorinated biphenyls in atmospheric aerosols
430
Optimization and application of methods of triacylglycerol evaluation for characterization of olive oil adulteration by soybean oil with HPLC–APCI-MS–MS
431
Optimization and application of microwave-assisted acid hydrolysis for rapid quantification of protein oxidation markers using LC–MS
432
Optimization and Application of Quantitative In-house ELISA for Diagnosis of HBsAg and its Correlation with Commercial ELISA and Molecular Kits
433
Optimization and application of real-time PCR method for detecting the expression levels of nitrogen assimilation-related genes in rice
434
Optimization and Application of Reciprocating Direct-Drive Electric Submersible Plunger Pump Lifting System in the Xinjiang Oilfield
435
Optimization and Assessment of the Comprehensive Performance of an Axial Separator by Response Surface Methodology
436
Optimization and beam dynamics of a superconducting radio-frequency gun
437
Optimization and beam dynamics of a superconducting radio-frequency gun
438
Optimization and Biodiesel Production from Prosopis Julifera Oil with High Free Fatty Acids
439
Optimization and calculation of the LaBr3–MBr (M=Na, K, Rb, Cs) phase diagrams
440
Optimization and calculation of the LaBr3–MBr (M=Na, K, Rb, Cs) phase diagrams
441
Optimization and calculation of the MCl–ZnCl2 (M = Li, Na, K) phase diagrams
442
Optimization and calculation of the NdCl3–MCl (M=Li, Na, K, Rb, Cs) phase diagrams
443
Optimization and calculation of the NdCl3–MCl (M=Li, Na, K, Rb, Cs) phase diagrams
444
Optimization and capacity expansion of a water distribution system
445
Optimization and Characterization Growth Conditions of Lipase-Producing Bacteria from Oil Contaminated Soil and Sewage
446
Optimization and characterization of a microscale thermal field-flow fractionation system
447
Optimization and characterization of a new lipopeptide biosurfactant produced by marine Brevibacterium aureum MSA13 in solid state culture
448
Optimization and characterization of a polysaccharide produced by Pseudomonas fluorescens WR-1 and its antioxidant activity
449
Optimization and characterization of an enzymatic membrane for the degradation of phenolic compounds
450
Optimization and characterization of an extracellular proteases from Aspergillus flavus ”MTCC 277”
451
Optimization and Characterization of Aspirin Encapsulated Nanoliposomes
452
Optimization and characterization of biodiesel production from microalgae Botryococcus grown at semi-continuous system
453
Optimization and characterization of biosurfactant production by Bacillus subtilis isolates towards microbial enhanced oil recovery applications
454
Optimization and Characterization of Brinzolamide Loaded Biodegradable, Amphiphilic Poly-caprolactone-Polyethylene Glycol-Poly-Caprolactone (5000-1000-5000) Tri-block Co-polymeric Carriers as Long-Acting Intravitreal Drug Delivery Vehicle for Glaucoma Therapy
455
Optimization and characterization of cold-active endoglucanase produced by Aspergillus terreus strain AKM-F3 grown on sugarcane bagasse
456
Optimization and characterization of direct coating for ibuprofen particles using a composite fluidized bed
457
Optimization and characterization of electroless co-deposited PdRu membranes: Effect of the plating variables on morphology
458
Optimization and characterization of enzymatic protein hydrolysis of Asiatic hard clam (Meretrix meretrix) compared with two other bivalve species
459
Optimization and characterization of polysaccharide-based bioflocculant produced by Paenibacillus elgii B69 and its application in wastewater treatment
460
Optimization and characterization of purified polysaccharide from Musa sapientum L. as a pharmaceutical excipient
461
Optimization and characterization of sliced activated carbon prepared from date palm tree fronds by physical activation
462
Optimization and characterization of spray-dried IgG formulations: a design of experiment approach
463
Optimization and characterization studies on bio-oil production from palm shell by pyrolysis using response surface methodology
464
Optimization and charaterization of repaglinide biodegradable polymeric nanoparticle loaded transdermal patchs: In vitro and in vivo studies
465
Optimization and clinical validation of a Real-Time PCR protocol for direct detection of Trichomonas vaginalis in pooled urine samples
466
Optimization and comparative characterization of neuraminidase activities from Pseudomonas aeruginosa with Klebsiella pneumoniae,Hep-2 cell, sheep kidney and rat liver lysosome
467
Optimization and comparison of chemical and electrochemical hydride generation for optical emission spectrometric determination of arsenic and antimony using a novel miniaturized microwave induced argon plasma exiting the microstrip wafer Original Researc
468
Optimization and comparison of double-layer and double-side micro-channel heat sinks with nanofluid for power electronics cooling
469
Optimization and comparison of HPLC and RRLC conditions for the analysis of carbonyl-DNPH derivatives
470
Optimization and Comparison of Ni and Cd Removal Using Zinc Powder with the Response Surface Methodology
471
Optimization and comparison of three different methods for the determination of Rn-222 in water
472
Optimization and comparison of ultrasound/microwave assisted extraction (UMAE) and ultrasonic assisted extraction (UAE) of lycopene from tomatoes
473
Optimization and comparison of ultrasound/microwave assisted extraction (UMAE) and ultrasonic assisted extraction (UAE) of lycopene from tomatoes
474
Optimization and Comparison of Ultrasound-Assisted Extraction of Estragole from Tarragon Leaves with Hydro-Distillation Method
475
Optimization and Comprehensive Investigation of the Effect of Geometrical Parameters on Entransy, Exergy and Entropy in Finned Tube Heat Exchangers
476
Optimization and construction of human insulin-like growth factor 1 gene related to human health
477
Optimization and control for military applications
478
Optimization and coordination of damping controls for improving system dynamic performance
479
Optimization and coordination of SVC-based supplementary controllers and PSSs to improve power system stability using a genetic algorithm
480
Optimization and coordination of wide-area damping controls for enhancing the transfer capability of interconnected power systems
481
Optimization and correlation of HPLC-ELSD and HPLC–MS/MS methods for identification and characterization of sophorolipids
482
Optimization and deactivation study of Fe–Ce/HZSM-5 catalyst in steam catalytic cracking of mixed ethanol/naphtha feed
483
Optimization and deactivation study of Fe–Ce/HZSM-5 catalyst in steam catalytic cracking of mixed ethanol/naphtha feed
484
Optimization and Design of a Low Power Switched Current A/D-ΣΔ-Modulator for Voice Band Applications
485
Optimization and design of energy transport system for solar cooking application
486
Optimization and design of network routing using refined asymptotic approximations
487
Optimization and determination of polyphenol oxidase and peroxidase activities in hot pepper (Capsicum annuum L.) pericarb
488
Optimization and determination of the absolute configuration of a series of potent inhibitors of human papillomavirus type-11 E1–E2 protein–protein interaction: A combined medicinal chemistry, NMR and computational chemistry approach Original Research Art
489
Optimization and development of a high-performance liquid chromatography-based one-site immunometric assay with chemiluminescence detection Original Research Article
490
Optimization and development of insulin nanoparticles by new thiolated chitosan derivative with ionic gelation method using a model-based methodology
491
Optimization and Development of Swellable Controlled Porosity Osmotic Pump Tablet for Theophylline
492
Optimization and economic evaluation of industrial gas production and combined heat and power generation from gasification of corn stover and distillers grains
493
Optimization and economic evaluation of pressurized liquid extraction of phenolic compounds from jabuticaba skins Original Research Article
494
Optimization and effect of varying catalyst concentration and trans-esterification temperature on the yield of biodiesel production from palm kernel oil and groundnut oil
495
Optimization and efficiency analysis of polygeneration system with coke-oven gas and coal gasified gas by Aspen Plus
496
Optimization and Efficient Purification in Production of Brucella melitensis Recombinant HSP A and TF Proteins With Low Endotoxin Contents
497
Optimization and emergence in marine ecosystem models
498
OPTIMIZATION an‎d ENHANCEMENT OF THE PERFORMANCE OF SMART SYSTEMS IN HIGH-RISE BUILDINGS BY MEANS OF META-HEURISTIC ALGORITHM
499
Optimization and equilibrium problems with equilibrium constraints
500
Optimization and evaluation of a decontamination step with peroxyacetic acid for fresh-cut produce Original Research Article
501
Optimization and evaluation of a modified enrichment procedure combined with immunomagnetic separation for detection of E. coli O157:H7 from artificially contaminated alfalfa sprouts
502
Optimization and evaluation of a procedure for the gas chromatographic–mass spectrometric analysis of the aromas generated by fast acid hydrolysis of flavor precursors extracted from grapes
503
Optimization and evaluation of a semi-continuous solar dryer for cereals (Rice, etc) Original Research Article
504
Optimization and evaluation of asymmetric flow field-flow fractionation of silver nanoparticles
505
Optimization and evaluation of atomic emission gas chromatographic detection for nitrogen using the 388 nm molecular emission spectral band
506
Optimization and evaluation of different chemical and electrochemical hydride generation systems for the determination of arsenic by microwave plasma torch optical emission spectrometry
507
Optimization and evaluation of fermentative hydrogen production and wastewater treatment processes using data enveloping analysis (DEA) and Taguchi design of experimental (DOE) methodology
508
Optimization and evaluation of low-pressure gas chromatography–mass spectrometry for the fast analysis of multiple pesticide residues in a food commodity
509
Optimization and evaluation of mixed-bed chemisorbents for extracting fission and activation products from marine and fresh waters Original Research Article
510
Optimization and Evaluation of Monthly and Annual Performance of Flat-Plate Solar Water Heater in Sanandaj City
511
Optimization and evaluation of rotary tiller blades: Computer solution of mathematical relations
512
Optimization and Evaluation of Sputtering Barrier/Seed Layer in Through Silicon Via for 3-D Integration
513
Optimization and evaluation of steel industry’s water-use system
514
Optimization and evaluation of the ANTHRO-BGC model for winter crops in Europe
515
Optimization and evaluation of the ANTHRO-BGC model for winter crops in Europe
516
Optimization and evaluation of the efficiency of sono-Fenton and photo-Fenton processes in the removal of 2, 4, 6 trinitrotoluene (TNT) from aqueous solutions
517
Optimization and evaluation of the process variable’s effect on color and turbidity removal from coffee processing wastewater: Using a photoelectrochemical oxidation process
518
Optimization and Evolution of Light Harvesting in Photosynthesis: The Role of Antenna Chlorophyll Conserved between Photosystem II and Photosystem I
519
Optimization and experiment of composite marine propellers
520
Optimization and Experimental Approaches to the Direct Methanol Fuel Cell Stack Using a Response Surface Methodology
521
Optimization and extensions of a fuzzy multicriteria decision making method and applications to selection of touristic destinations
522
Optimization and external reference; a comparison of three axiomatic systems
523
Optimization and fed-batch production of PHB utilizing dairy waste and sea water as nutrient sources by Bacillus megaterium SRKP-3
524
Optimization and field application of a filter pack system for the simultaneous sampling of atmospheric HN03, NH3 AND SO2
525
Optimization and field demonstration of hybrid hydrogen generator/high efficiency furnace system
526
Optimization and Formulation of Orodispersible Tablets of Meloxicam
527
Optimization and Fully Distributed Analysis of Single Pole Single Throw Traveling Wave Switchesat Millimeter Wave Frequency Band
528
Optimization and Generality of a Small Deoxyribozyme that Ligates RNA
529
Optimization and heuristic models to integrate project task and manpower scheduling
530
Optimization and High Level Production of Recombinant Synthetic Streptokinase in E. coli Using Response Surface Methodology
531
Optimization and implementation of the integer wavelet transform for image coding
532
Optimization and increase production and efficiency of gas turbines GE-F9 using Media evaporative cooler in Fars combined cycle power plant
533
Optimization and Interpretation of Heat Distribution in Sterilization Room Using Convection Pipe
534
Optimization and Investigation of the Initial Parameters Effects on Machining Forces in Aerial Graphite Part
535
Optimization and Isothermal Studies of Antibiotics Mixture Biosorption From Wastewater Using Palm Kernel, Chrysophyllum albidum, and Coconut Shells Biocomposite
536
Optimization and kinetic analysis of food dyes biosorption by Spirulina platensis
537
Optimization and kinetic evaluation of acid blue 193 degradation by UV/peroxydisulfate oxidation using response surface methodology
538
Optimization and Kinetic Studies of Ultrasound-Assisted Extraction on Polyphenols from Satsuma Mandarin (Citrus Unshiu Marc.) Leaves
539
Optimization and kinetic studies on algal oil extraction from marine macroalgae Ulva lactuca
540
Optimization and kinetic studies on biodiesel production from underutilized Ceiba Pentandra oil
541
Optimization and kinetic study on the synthesis of palm oil ester using Lipozyme TL IM
542
Optimization and kinetics of phosphoric acid doping of poly(1-vinylimidazole)-graft-poly(ethylene-co-tetrafluorethylene) proton conducting membrane precursors
543
Optimization and kinetics of the cementation of lead with aluminum powder
544
Optimization and kinetics studies on biodegradation of atrazine using mixed microorganisms
545
Optimization and life-cycle cost of health clinic PV system for a rural area in southern Iraq using HOMER software
546
Optimization and limitations of known DEMO divertor concepts
547
Optimization and lipid production enhancement of microalgae culture by efficiently changing the conditions along with the growth-state
548
Optimization and management of the energy produced by a wind energizing system
549
Optimization and mathematical modeling of mass transfer between Zostera marina residues and supercritical CO2 modified with ethanol
550
Optimization and metabolic stabilization of a class of nonsteroidal glucocorticoid modulators
551
Optimization and microbial community analysis for production of biohydrogen from palm oil mill effluent by thermophilic fermentative process
552
Optimization and Model of Laminar Cooling Control System for Hot Strip Mills Original Research Article
553
Optimization and modeling of a photovoltaic solar integrated system by neural networks
554
Optimization and modeling of boric acid extraction from colemanite in water saturated with carbon dioxide and sulphur dioxide gases
555
Optimization and Modeling of Complete Removal of N-Compounds from Oil Cut Using Response Surface Methodology (RSM) by CuAlO2/ZSM-12&35 as a New Photocatalyst
556
Optimization and Modeling of CuOx/OMWNT’s for Catalytic Reduction of Nitrogen Oxides by Response Surface Methodology
557
Optimization and modeling of decolorization and COD reduction of reactive dye solutions by ultrasound-assisted adsorption
558
Optimization and modeling of extraction of solid coconut waste oil Original Research Article
559
Optimization and modeling of lactose hydrolysis in a packed bed system using immobilized β-galactosidase from Aspergillus oryzae
560
Optimization and Modeling of Microcystin-LR Degradation by TiO_2 Photocatalyst Using Response Surface Methodology
561
Optimization and Modeling of Oxidation Process Parameters of α-Brass Alloy
562
Optimization and modeling of photocatalytic degradation of Direct Blue 71 from contaminated water by TiO2 nanoparticles: Response surface methodology approach (RSM)
563
Optimization and modeling of zinc borate (2ZnO·3B2O3·3.5H2O) production with the reaction of boric acid and zinc oxide
564
Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network
565
Optimization and Molecular Detection of Neuraminidase Gene in Listeria monocytogenes
566
Optimization and morphology for decolorization of reactive black 5 by Funalia trogii
567
Optimization and new applications of a magnetic trap for ultra-cold neutrons
568
Optimization and new applications of a magnetic trap for ultra-cold neutrons
569
Optimization and non-linear control of a batch emulsion polymerization reactor
570
Optimization and Numerical investigation of organic dye degradation using Response Surface by green synthesized ZrO2 nanoparticles and its antibacterial activity
571
Optimization and parallelization of a force field for silicon using OpenMP Original Research Article
572
Optimization and parameters estimation in petroleum engineering problems using ant colony algorithm
573
Optimization and Parametric Study of the Cap Geometry on Collapse Properties of Energy Absorbers under Quasistatic Loading
574
Optimization and passivation of HTS step-edge Josephson junction rf SQUIDs
575
Optimization and Performance Analysis of Scala over Java Compiler
576
Optimization and performance of a rapid gas chromatography–mass spectrometry analysis for methylmalonic acid determination in serum and plasma
577
Optimization and Placement of DG Resources in the Network to Reduce Line Loading
578
Optimization and Prediction of Reaction Parameters of Plastic Pyrolysis Oil Production Using Taguchi Method
579
Optimization and probabilistic calibration of avalanche block models
580
Optimization and production of a biosurfactant from the sponge-associated marine fungus Aspergillus ustus MSF3
581
Optimization and Production of Botryococcus braunii Biomass using Commercial Nutrients by Response Surface Methodology
582
Optimization and quality assessment of the post-digestion 18O labeling based on urea for protein denaturation by HPLC/ESI-TOF mass spectrometry
583
Optimization and quality evaluation of freeze dried mutton manchurian
584
Optimization and real-time control for laser treatment of heterogeneous soft tissues
585
Optimization and reconstruction of hv-convex (0,1)-matrices
586
Optimization and reconstruction of image-convex image-matrices Original Research Article
587
Optimization and Removal Efficiency of Basic Textile Dyestuffs with Using Perfluorosulfonic Acid-Based Polymer
588
Optimization and Response Surface Modeling of Chromium Removal from Aqueous Solution using Nano Zero Valent Iron (NZVI)
589
Optimization and risk acceptability based on the Life Quality Index
590
Optimization and SAR for dual ErbB-1/ErbB-2 tyrosine kinase inhibition in the 6-furanylquinazoline series
591
Optimization and Scale up of Cellulase free Endo xylanase Production by Solid State Fermentation on Corn cob and by Immobilized Cells of a Thermotolerant Bacterial Isolate
592
Optimization and Scale Up of Cellulase-Free Xylanase Production in Solid State Fermentation on Wheat Bran by Cellulosimicrobium sp. MTCC 10645
593
Optimization and scale-up of CNF production based on intrinsic kinetic data obtained from TEOM
594
Optimization and scale-up of propionic acid production by propionic acid-tolerant Propionibacterium acidipropionici with glycerol as the carbon source
595
Optimization and self-organized criticality in a magnetic system
596
Optimization and sensitivity analysis of a photovoltaic-electrolyser direct-coupling system in Beijing
597
Optimization and sensitivity analysis of computer simulation models by the score function method
598
Optimization and sensitivity analysis of controlling arrivals in the queueing system with single working vacation
599
Optimization and sensitivity analysis of space frames allowing for large deflection
600
Optimization and simplification of polymer–fullerene solar cells through polymer and active layer design
601
Optimization and Sizing for Propulsion System of Liquid Rocket Using Genetic Algorithm
602
Optimization and spectroscopic studies of CdS/poly(vinyl alcohol) nanocomposites
603
Optimization and stability of the contrast transfer function in aberration-corrected electron microscopy
604
Optimization and stability of the contrast transfer function in aberration-corrected electron microscopy
605
Optimization and stabilization of LBM free surface flow simulations using adaptive parameterization
606
Optimization and Standardization of Xanthate Derivatives Consumption in Lead Mine during Floatation Process: An Environmental Assessment
607
Optimization and statistical modeling of catalytic oxidation of 2-propanol over CuMnmCo2−mO4 nano spinels by unreplicated split design methodology
608
Optimization and Storage Studies on Inderse - A Traditional Fermented Rice Product
609
Optimization and structure–activity relationship of a series of 1-phenyl-1,8-naphthyridin-4-one-3-carboxamides: Identification of MK-0873, a potent and effective PDE4 inhibitor
610
Optimization and synthesis of plasma polymerized proton exchange membranes for direct methanol fuel cells
611
Optimization and temperature mapping of an ultra-high thermal stability environmental enclosure
612
Optimization and the effect of steam turbine outlet quality on the output power of a combined cycle power plant
613
Optimization and thermal cycling behavior of La2Ce2O7 thermal barrier coatings
614
Optimization and thermal stability of TiAlN/Mo multilayers
615
Optimization and thermodynamic understanding of conduction-cooled Peltier current leads Original Research Article
616
Optimization and tolerance prediction of sheet metal forming process using response surface model
617
Optimization and Torque Improvement of a Salient-Pole Permanent Magnet Synchronous Machine by Three-step Skewed Pole Shoe Method
618
Optimization and Utilization of Semisolid Casting Process for Semisolid Welding of Al-6061 Alloy
619
Optimization and validation of a California halibut environmental estrogen bioassay using a heterologous ELISA Original Research Article
620
Optimization and validation of a capillary electrophoresis methodology for inorganic anions in atmospheric aerosol samples
621
Optimization and validation of a capillary zone electrophoretic method for the analysis of several angiotensin-II-receptor antagonists
622
Optimization and validation of a capillary zone electrophoretic method for the simultaneous analysis of four atypical antipsychotics
623
OPTIMIZATION AND VALIDATION OF A CELL-BASED TYROSINASE ASSAY FOR SCREENING OF TYROSINASE INHIBITORS
624
Optimization and Validation of a Diagnostic Real-Time PCR for Specific Detection of Mycobacterium avium Subspecies Paratuberculosis
625
Optimization and validation of a gas chromatographic method for analysis of (RS,SR)-diastereoisomeric impurity in formoterol fumarate
626
Optimization and validation of a high performance liquid chromatography method for the simultaneous determination of vitamins A and E in human serum using monolithic column and diode-array detection Original Research Article
627
Optimization and validation of a high-performance liquid chromatographic method with UV detection for the determination of ketoconazole in canine plasma
628
Optimization and validation of a high-performance liquid chromatographic method with UV detection for the determination of pyrrole–imidazole polyamides in rat plasma
629
Optimization and validation of a high-performance liquid chromatography method for the analysis of cardiac glycosides in Digitalis lanata
630
Optimization and validation of a Laser Ablation Inductively Coupled Plasma Mass Spectrometry method for the routine analysis of soils and sediments
631
Optimization and validation of a Laser Ablation Inductively Coupled Plasma Mass Spectrometry method for the routine analysis of soils and sediments
632
Optimization and validation of a liquid chromatography tandem mass spectrometry (LC/MSn) method for analysis of corticosteroids in bovine liver: Evaluation of Keyhole Limpet β-glucuronidase/sulfatase enzyme extract
633
Optimization and validation of a low temperature microwave-assisted extraction method for analysis of polycyclic aromatic hydrocarbons in airborne particulate matter
634
Optimization and validation of a method based in a QuEChERS procedure and gas chromatography–mass spectrometry for the determination of multi-mycotoxins in popcorn
635
Optimization and validation of a method for the determination of caffeine, 8-chlorotheophylline and diphenhydramine by isocratic high-performance liquid chromatography: Stress test for stability evaluation
636
Optimization and validation of a method of analysis for fenitrothion and its main metabolites in forestry air samples using sorbent tubes with thermal desorption cold trap injection and gas chromatography–mass spectrometry
637
Optimization and validation of a methodology based on solvent extraction and liquid chromatography for the simultaneous determination of several polyphenolic families in fruit juices
638
Optimization and validation of a micellar electrokinetic chromatographic method for the analysis of several angiotensin-II-receptor antagonists
639
Optimization and validation of a microwave digestion method for multi-element characterization of Romanian wines
640
Optimization and validation of a new method for analysis of linear alkylbenzene sulfonates in sewage sludge by liquid chromatography after microwave-assisted extraction Original Research Article
641
Optimization and validation of a new method of analysis for polycyclic aromatic hydrocarbons in sewage sludge by liquid chromatography after microwave assisted extraction
642
Optimization and validation of a new method of analysis for polycyclic aromatic hydrocarbons in sewage sludge by liquid chromatography after microwave assisted extraction Original Research Article
643
Optimization and Validation of a novel Nebulizer-assisted Liquid Phase Microextraction Followed by HPLC-DAD for Diazinon Analysis in Plasma Samples
644
Optimization and validation of a rapid high-resolution T1-w 3D FLASH water excitation MRI sequence for the quantitative assessment of articular cartilage volume and thickness
645
Optimization and validation of an analytical procedure by high-performance liquid chromatography for the quantification of peroxisomicines and isoperoxisomicines
646
Optimization and validation of an automated DHS–TD–GC–MS method for the determination of aromatic esters in sweet wines
647
Optimization and validation of an automated voltammetric stripping technique for ultratrace metal analysis Original Research Article
648
Optimization and validation of an enzyme immunoassay for the insect growth regulator fenoxycarb Original Research Article
649
Optimization and validation of an ion chromatographic method for the simultaneous determination of sodium, ammonium and potassium in exhaled breath condensate
650
Optimization and validation of headspace sorptive extraction for the analysis of volatile compounds in wine vinegars
651
Optimization and validation of liquid–liquid extraction with low temperature partitioning for determination of carbamates in water Original Research Article
652
Optimization and validation of low field nuclear magnetic resonance sequences to determine low water contents and water profiles in W/O emulsions
653
Optimization and validation of PEF processing conditions to inactivate oxidative enzymes of grape juice Original Research Article
654
Optimization and validation of post-column assay for screening of radical scavengers in herbal raw materials and herbal preparations
655
Optimization and Validation of RP-HPLC-UV/VIS Method for Determination Some Antioxidants in Dry Calyces of Iraqi Hibiscus Sabdraffia Linn
656
Optimization and validation of solid phase micro-extraction (SPME) method for analysis of polycyclic aromatic hydrocarbons in rainwater and stormwater
657
Optimization and validation of the direct HPLC method for the determination of moxifloxacin in plasma
658
Optimization approach for 3D model watermarking by linear binary programming Original Research Article
659
Optimization approach for data allocation in multidisk database
660
OPTIMIZATION APPROACH FOR SHIELDING COST OF MEDICAL CYCLOTRONS WITH FUZZINESS
661
Optimization approach in variable-charge potential for metal/metal oxide systems
662
OPTIMIZATION APPROACH TO THE RETRIEVAL OF THE CONSTITUTIVE PARAMETERS OF SLAB OF GENERAL BIANISOTROPIC MEDIUM
663
Optimization approaches of aircraft flight path reducing noise: Comparison of modeling methods
664
Optimization approaches to frequency-domain inverse problems for Kerr-like and non-Kerr-like nonlinear media Original Research Article
665
Optimization architecture for joint multi-path routing and scheduling in wireless mesh networks
666
Optimization as a function of the phase-lag order of nonlinear explicit two-step P-stable method for linear periodic IVPs
667
Optimization as a result of the interplay between dynamics and structure
668
Optimization as investment decision support in a Swedish medium-sized iron foundry – A move beyond traditional energy auditing
669
Optimization aspects of comprehensive two-dimensional gas chromatography
670
Optimization at the design phase of the potential impact of ITER on workers, the public and the environment
671
Optimization based bidding strategies in the deregulated market
672
OPTIMIZATION BASED CONTROL COORDINATION OF STATCOM AND PSS OUTPUT FEEDBACK DAMPING CONTROLLER USING PSO TECHNIQUE
673
Optimization based DC programming and DCA for hierarchical clustering
674
Optimization based grayscale image colorization
675
Optimization based on a team of automata with binary outputs
676
Optimization Based on Convergence Velocity and Reliability for Hydraulic Servo System
677
Optimization based simulation of self-expanding Nitinol stent
678
Optimization Based Solution of Density Dependent Seawater Intrusion in Coastal Aquifers
679
Optimization between heating load and entropy-production rate for endoreversible absorption heat-transformers
680
Optimization by experimental design and artificial neural networks of the ion-interaction reversed-phase liquid chromatographic separation of twenty cosmetic preservatives
681
Optimization by Grey relational analysis of EDM parameters on machining Al–10%SiCP composites
682
Optimization by means of responses surface of an analytical sequence using a sequential injection system
683
Optimization by random search with jumps
684
Optimization by the simplex method of the separation of phenolic acids by high-performance liquid chromatography in wastewater olive and sugar beet vinasse
685
Optimization by Using the Taguchi Method of Boric Acid Production by Dissolving Flash Calcined Colemanite in Water Saturated with SO2
686
Optimization Capabilities of LMS and SMI Algorithm for Smart Antenna Systems
687
Optimization condition in labeling of Ofloxacin with 99mTc and its biological evaluation in Staphylococcus aureus and Escherichia coli for infection imaging
688
Optimization conditions for Agrobacterium-mediated transformation of Brassica rapa with a bacterial isochorismate synthase gene
689
Optimization Conditions For Determination of Cosmetic Preservatives using Ion-Exclusion Chromatography
690
Optimization conditions of samples saponification for tocopherol analysis
691
Optimization control of bionics shell roofs subjected to snow skidding
692
OPTIMIZATION CONTROL OF COMPOSITE LAMINATES FOR MAXIMUM THERMAL BUCKLING AND MINIMUM VIBRATIONAL RESPONSE
693
Optimization Control System using the Quantum Behaved Particle Swarm Optimization on Vehicle Steering Control System with Steer-by-Wire System
694
OPTIMIZATION CORRELATION FOR ENTROPY PRODUCTION AND ENERGY AVAILABILITY IN FILM CONDENSATION
695
Optimization costs of the single-machine scheduling problem with maintenance activities by using genetic algorithm
696
Optimization criteria for cogeneration systems: Multi-objective approach and application in an hospital facility
697
OPTIMIZATION CRITERIA FOR DESIGN OF TUNED MASS DAMPERS INCLUDING SOIL–STRUCTURE INTERACTION EFFECT
698
Optimization criteria for the important parameters of an irreversible Otto heat-engine
699
Optimization density power and thermal efficiency of an endoreversible Braysson cycle by using non-dominated sorting genetic algorithm
700
Optimization Design of a Semi-Open Centrifugal Impeller using GA-Fuzzy Logic Combination Strategy
701
Optimization design of an axial-flow fan used for mining local-ventilation
702
Optimization design of an explicitly defined rack for the generation of rotors for twin-screw compressors
703
Optimization design of biorthogonal filter banks for image compression
704
Optimization design of control charts based on minimax decision criterion and fuzzy process shifts
705
Optimization design of CuCrxMn2−xO4-based paint coatings used for solar selective applications
706
Optimization design of exhaust duct system in semiconductor factory using dynamic programming method
707
Optimization design of grinding wheel topography for high efficiency grinding
708
Optimization design of heat exchanger in an irreversible regenerative Brayton cycle system
709
Optimization design of microchannel heat sink geometry for high power laser mirror
710
Optimization design of plate heat exchangers (PHE) for geothermal district heating system
711
Optimization design of roll profiles for cold roll forming based on response surface method
712
Optimization design of shell-and-tube heat exchanger by entropy generation minimization and genetic algorithm
713
Optimization design of slotted fin by numerical simulation coupled with genetic algorithm
714
Optimization design of solar enhanced natural draft dry cooling tower
715
Optimization design of the coating furnace by 3-d simulation of spouted bed dynamics in the coater
716
Optimization Design of the Integral Inertial Particle Separator Based on Response Surface Method
717
Optimization design of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN coating used for solar selective applications
718
Optimization design of water-cooled mirror for low thermal deformation
719
Optimization Design System for Composite Structures Based on Grid Technology
720
Optimization designs and performance comparison of two CUSUM schemes for monitoring process shifts in mean and variance
721
Optimization detection of plant pathogenic bacteria by electrochemiluminescence polymerase chain reaction method
722
Optimization driven bandwidth provisioning in service overlay networks
723
Optimization engineering techniques for the exact solution of NP-hard combinatorial optimization problems
724
Optimization Evaluation Test of Strength and Toughness Parameters for Hot-Stamped High Strength Steels Original Research Article
725
Optimization Extraction of Terbium by Supported Liquid Membrane Using D2EHPA and TOPO
726
Optimization Feed Composition on Hyaluronic Acid Production of in-Batch and Fed-Batch Cultures of Streptococcus zooepidemicus
727
Optimization flow control. I. Basic algorithm and convergence
728
Optimization foam filled thin-walled structures for the crashworthiness capability: Review
729
Optimization for a heat exchanger couple based on the minimum thermal resistance principle
730
Optimization for a steam turbine stage efficiency using a genetic algorithm
731
Optimization for adaptive bandwidth reservation in wireless multimedia networks
732
Optimization for biopolymer production by Enterobacter cloacae WD7
733
OPTIMIZATION FOR BRAIN ACTIVITY MONITORING WITH NEAR INFRARED LIGHT IN A FOUR-LAYERED MODEL OF THE HUMAN HEAD
734
Optimization for buckling loads of grid stiffened composite panels
735
Optimization for condition-based maintenance with semi-Markov decision process
736
Optimization for condition-based maintenance with semi-Markov decision process
737
Optimization for design and operation of natural gas transmission networks
738
Optimization for error-canceling loop of the feedforward amplifier using a new system-level mathematical model
739
Optimization for extraction on total phenolic content and radical scavenging capacity of Henna (Lawsonia inermis) stems using response surface methodology
740
Optimization for field emission from carbon nanotubes array by Fowler–Nordheim equation
741
Optimization for Fractional PID Control Parameters on DC Motor Based on Artificial Bee Colony Optimization Algorithm.
742
Optimization for high level expression of cold and pH tolerant amylase in a newly isolated Pedobacter sp. through Response Surface Methodology
743
Optimization for ice-storage air-conditioning system using particle swarm algorithm
744
Optimization for large scale process based on evolutionary algorithms: Genetic algorithms
745
Optimization for limited angle tomography in medical image processing
746
Optimization for production of exopolysaccharides with antitumor activity in vitro from Paecilomyces hepiali
747
Optimization for quantitative determination of four flavonoids in Epimedium by capillary zone electrophoresis coupled with diode array detection using central composite design
748
Optimization for Rapid Detection of E. coli O157:H7 Using Real-Time Loop-Mediated Isothermal Amplification
749
Optimization for signal setting problems using non-smooth techniques
750
Optimization for solidification of low-level-radioactive resin using Taguchi analysis
751
Optimization for sound transmission through a double-wall panel
752
Optimization for speed and sensitivity in capillary high performance liquid chromatography. The importance of column diameter in online monitoring of serotonin by microdialysis
753
Optimization for supply chain models with policies
754
optimization for systems with adobe input delays: A loop shifting approach
755
Optimization for the forming process parameters of thin-walled valve shell
756
Optimization for the production of exopolysaccharide from Fomes fomentarius in submerged culture and its antitumor effect in vitro
757
Optimization for the production of exopolysaccharides from Morchella esculenta SO-02 in submerged culture and its antioxidant activities in vitro
758
Optimization for the production of exopolysaccharides from Morchella esculenta SO-02 in submerged culture and its antioxidant activities in vitro
759
Optimization for the tritium isotope separation factor and permeation by selecting temperature and thickness of the diffusion Pd–Ag alloy cathode
760
Optimization for ultrasound-assisted extraction of polysaccharides with antioxidant activity in vitro from the aerial root of Ficus microcarpa
761
OPTIMIZATION FORMULATION FOR NONLINEAR STRUCTURAL ANALYSIS
762
Optimization Fusion Approach For Image Segmentation Using K-Means Algorithm
763
Optimization Gear Oil Pump in Order to Energy Saving and Environmental Impact in a Diesel Engine
764
Optimization in a multivariate generalized linear model situation
765
Optimization in a vintage capital model with piecewise linear cost function Original Research Article
766
Optimization in an instantaneous economic order quantity (EOQ) model incorporated with promotional effort cost, variable ordering cost and units lost due to deterioration
767
Optimization in an intuitionistic fuzzy environment
768
Optimization in Data Mining
769
Optimization in esterification of palmitic acid with excess methanol by solid acid catalyst
770
Optimization in Internet Networks Using Data Envelopment Analysis Model with Undesirable Outputs
771
Optimization in Marketing Enhancing Efficiency and Effectiveness
772
Optimization in Peptide Synthetic Conditions of 1,4-Butanediol Dimethacrylate Cross-Linked Polystyrene Resin and its Efficiency in Solid Phase Peptide Synthesis
773
Optimization in plate-fin safety structure of heat exchanger using genetic and Monte Carlo algorithm
774
Optimization in progressively Type-II censoring with random sample size based on cost constraint
775
Optimization in sample stacking for the measurement of short chain organic acids in serum of natural rubber latex by capillary electrophoresis Original Research Article
776
Optimization in seeded cooling crystallization: A parameter estimation and dynamic optimization study
777
Optimization in Supply Chain Design of Assembled Products: A Case Study of HEPCO Company
778
Optimization in target movement simulations Original Research Article
779
OPTIMIZATION IN THE EORMALDEBLYDE. DETERMINATION AT SUB-PPM LEVEL FROM ACETALS BY HPLC-DAD
780
Optimization issues of querying and evolving sensor and stream databases
781
Optimization layer by layer networks for in-core fuel management optimization computations in PWRs
782
Optimization Load Balancing Scheduling Algorithm in Distributed Multi-Agent Systems
783
Optimization mechanical properties of polyurethane/Sio2 nanocomposite on Polypropylene substrate for automotive clear coating by Taguchi method
784
Optimization method for metal-forming processes
785
Optimization method for mission analysis of aeroassisted orbital transfer vehicles
786
Optimization method for sensor planning
787
Optimization method for stamping tools under reliability constraints using genetic algorithms and finite element simulations
788
Optimization method for steady conduction in special geometry using a boundary element method
789
Optimization method for the inverse problem of reconstructing the source term in a parabolic equation Original Research Article
790
Optimization method for wind turbine rotors
791
Optimization method for wind turbine rotors
792
Optimization Methodology for Damper Configuration Based on Building Performance Indices
793
Optimization Methodology for Damper Configuration Based on Building Performance Indices
794
Optimization methodology for electrospray evaporative cooling chambers
795
Optimization methodology for land use patterns using spatially explicit landscape models
796
Optimization methodology for land use patterns using spatially explicit landscape models
797
Optimization methodology for land use patterns—evaluation based on multiscale habitat pattern comparison
798
Optimization methodology for land use patterns—evaluation based on multiscale habitat pattern comparison
799
Optimization methods applied for Wind–PSP operation and scheduling under deregulated market: A review
800
Optimization methods applied to material and flextensional actuator design using the homogenization method Original Research Article
801
Optimization methods applied to renewable and sustainable energy: A review
802
Optimization methods applied to the design of eco-industrial parks: a literature review
803
Optimization methods for crashworthiness design using multibody models
804
Optimization methods for electric utility resource planning
805
Optimization methods for fuzzy clustering
806
Optimization methods for the planning of rapid transit systems
807
Optimization methods for the tube hydroforming process applied to advanced high-strength steels with experimental verification
808
Optimization methods in chromatography and capillary electrophoresis
809
Optimization Methods in Finance by Gerard Cornuejols, Reha Tutuncu
810
Optimization mixed procurement model for MRP and JIT with hybrid particle Swarm algorithm and genetic algorithm
811
Optimization model for designing disruption-oriented network of laboratory services and managing procurement of health items under uncertainty: A real-world case study
812
Optimization Model for Energy Planning with CO2 Emission Considerations
813
Optimization model for remanufacturing in a real world sawmill
814
Optimization model for resource assignment problems of linear construction projects
815
Optimization model for sustainable materials selection using objective and subjective factors
816
Optimization model for the selection of materials using a LEED-based green building rating system in Colombia
817
Optimization model of agricultural production system in grain farms under risk, in Sorriso, Brazil
818
Optimization Model of Hirmand River Basin Water Resources in the Agricultural Sector Using Stochastic Dynamic Programming under Uncertainty Conditions
819
Optimization model of submerged hollow fiber membrane modules
820
Optimization model predictions for postural coordination modes
821
Optimization modeling for estimating and enhancing relative efficiency with application to industrial companies
822
Optimization modeling of district heating networks and calculation by the Newton method
823
Optimization modeling of plant root architecture for water and phosphorus acquisition
824
Optimization modelling for seawater intrusion management
825
Optimization Models and Algorithms for Operation and Control with Advanced Information Technologies
826
Optimization Models and Algorithms for Services and Operations Management
827
Optimization Models and Algorithms for Services and Operations Management
828
Optimization models and methods for planning wireless mesh networks
829
Optimization Models for a Deteriorating Single Server Queuing Production System
830
Optimization models for ATM network planning
831
Optimization models for complex recovery block schemes
832
Optimization models for mine planning
833
Optimization models for quality and cost of modular software systems
834
Optimization models for recovery block schemes
835
Optimization Models for Reducing the Air Pollutants Emission in the Production of Insulation Bituminous
836
Optimization models for salesforce compensation
837
Optimization models for shape matching of nonconvex polygons
838
Optimization models for targeted offers in direct marketing: Exact and heuristic algorithms
839
Optimization Models for the First Arrival Target Distribution Function in Discrete Time
840
Optimization models for the single delay management problem in public transportation
841
Optimization models of an age-specific herd
842
Optimization models of an age-specific herd
843
Optimization network flow control and price coordination with feedback: proposal of a new distributed algorithm
844
Optimization of (4,4-difluoro-1,2,3,4-tetrahydro-5H-1-benzazepine-5-ylidene)acetamide derivatives as arginine vasopressin V2 receptor agonists and discussion of their binding modes Original Research Article
845
Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids
846
Optimization of “Serpa” cheese whey nanofiltration for effluent minimization and by-products recovery
847
Optimization of 1 MVA high T/sub C/ superconducting transformer windings
848
Optimization of 1,2-Diaminopropane Preparation by the Ammonolysis of Waste 1,2-Dichloropropane
849
Optimization of 1,3-butadiene monomer coordination polymerization using response surface methodology (RSM)
850
Optimization of 1,4-diazepan-2-one containing dipeptidyl peptidase IV inhibitors for the treatment of type 2 diabetes
851
Optimization of 124I production via 124Te(p,n)124I reaction
852
Optimization of 13C isotopic tracers for metabolic flux analysis in mammalian cells
853
Optimization of 1-glyceryl benzoate production by enzymatic transesterification in organic solvents
854
Optimization of 1H-tetrazole-1-alkanenitriles as potent orally bioavailable growth hormone secretagogues
855
Optimization of 2,3,5-trisubstituted pyridine derivatives as potent allosteric Akt1 and Akt2 inhibitors
856
Optimization of 2,3-dihydroxybiphenyl 1,2-dioxygenase expression and its application for biosensor
857
Optimization of 2,4-diaminopyrimidines as GHS-R antagonists: Side chain exploration
858
Optimization of 2,6-Dimethoxy Benzoquinone Production through Wheat Germ Fermentation by Saccharomyces cerevisiae
859
Optimization of 210Pb determination via spontaneous deposition of 210Po on a silver disk Original Research Article
860
Optimization of 2-aminothiazole derivatives as CCR4 antagonists
861
Optimization of 2D boundary element models using β-splines and genetic algorithms
862
Optimization of 316 stainless steel/alumina functionally graded material for reduction of damage induced by thermal residual stresses
863
Optimization of 316 stainless steel/alumina functionally graded material for reduction of damage induced by thermal residual stresses
864
Optimization of 316L stainless steel coatings on light alloys using Cold Gas Spray
865
Optimization of 360° projection fluorescence molecular tomography
866
Optimization of 3C–SiC/Si heterointerfaces in epitaxial growth
867
Optimization of 3D Alginate Scaffold Properties with Interconnected Porosity Using Freeze-drying Method for Cartilage Tissue Engineering Application
868
Optimization of 3-D hepatocyte culture by controlling the physical and chemical properties of the extra-cellular matrices
869
Optimization of 3D MP-RAGE for neonatal brain imaging at 3.0 T
870
Optimization of 3-D natural convection around the isothermal cylinder using Taguchi method
871
Optimization of 3d trusses with adaptive approach in genetic algorithms
872
Optimization of 3-phenylpyrazolo[1,5-a]pyrimidines as potent corticotropin-releasing factor-1 antagonists with adequate lipophilicity and water solubility
873
Optimization of 6,6-dimethyl pyrrolo[3,4-c]pyrazoles: Identification of PHA-793887, a potent CDK inhibitor suitable for intravenous dosing Original Research Article
874
Optimization of 60Co production using neutron flux trap in the Tehran research reactor
875
Optimization of 67% Powder Loading Co-30Cr-6Mo μMIM Part by Taguchi Method
876
Optimization of a 200 kW SOFC cogeneration power plant. Part II: variation of the flowsheet
877
Optimization of a 200 kW SOFC cogeneration power plant: Part I: Variation of process parameters
878
Optimization of a 6LiF bolometric neutron detector
879
Optimization of a 6LiF bolometric neutron detector
880
Optimization of a bacterial bioluminescent biosensor through experimental design
881
Optimization of a bioactive exopolysaccharide production from endophytic Fusarium solani SD5
882
Optimization of a Bi-objective Scheduling for Two Groups of Experienced and Inexperienced Distribution Staff Based on Capillary Marketing
883
Optimization of a biocatalytic process to gain (R)-1-phenylethanol by applying the software tool Sabento for ecological assessment during the early stages of development
884
Optimization of a biocatalytic single-step alkene cleavage of aryl alkenes
885
Optimization of a biological process for treating potato chips industry wastewater using a mixed culture of Aspergillus foetidus and Aspergillus niger
886
Optimization of a blanching step to maximize sulforaphane synthesis in broccoli florets
887
Optimization of a Bleaching Process for the Conversion of Sugar Beet Pulp Alpha-Cellulose with a High Whiteness Index and Purity
888
Optimization of a capillary electrophoresis–electrospray mass spectrometry method for the quantitation of the 20 natural amino acids in childrens blood
889
Optimization of a capillary electrophoretic method to detect and quantify the Gly–Pro dipeptide in complex matrices from long term cultured prolidase deficiency fibroblasts
890
Optimization of a capillary zone electrophoresis method by using a central composite factorial design for the determination of codeine and paracetamol in pharmaceuticals
891
Optimization of a catalyst system through the sequential application of experimental design techniques
892
Optimization of a catalytic combustor using electrosprayed liquid hydrocarbons for mesoscale power generation
893
Optimization of a central-heating radiator
894
Optimization of a CFD – Heap leach model and sensitivity analysis of process operation
895
Optimization of a charge coupled device imaging enzyme linked immuno sorbent assay and supports for the simultaneous determination of multiple 2,4-D samples
896
Optimization of a chromatographic stationary phase based on gellan gum using central composite design
897
Optimization of a Class of Distributed Parameter Systems with Deviating Argument
898
Optimization of a Class of Distributed Parameter Systems with Deviating Argument
899
Optimization of a clean-up procedure for the determination of heterocyclic aromatic amines in urine by field-amplified sample injection–capillary electrophoresis–mass spectrometry
900
Optimization of a CO2–C3H8 cascade system for refrigeration and heating
901
Optimization of a coagulation factor VIIa inhibitor found in factor Xa inhibitor library Original Research Article
902
Optimization of a coincidence system using plastic scintillators in 4π geometry
903
Optimization of a cold-working process for increasing fatigue life
904
Optimization of a combined heat and power PEFC by exergy analysis
905
Optimization of a combined thermionic–thermoelectric generator
906
Optimization of a commercial aircraft environmental control system
907
Optimization of a Composite Plate Buckling under Thermal Action with Account of Reliability
908
Optimization of a Compton-suppression system by escape-peak ratio
909
Optimization of a concentrating photovoltaic thermal (CPV/T) system used for a domestic application
910
Optimization of a conduction-cooled LTS pulse coil
911
Optimization of a container design for depositing uniform metal coatings on glass microspheres by magnetron sputtering
912
Optimization of a continuous distillation process under random inflow rate
913
Optimization of a convenient route to produce N-succinimidyl 4-radiodobenzoate for radioiodination of proteins
914
Optimization of a counter-flow microchannel reactor using hydrogen assisted catalytic combustion for steam reforming of methane
915
Optimization of a crankshaft rolling process for durability
916
Optimization of a derivatization–solid-phase microextraction method for the analysis of thirty phenolic pollutants in water samples
917
Optimization of a design code for wind-turbine rotor blades in fatigue
918
Optimization of a direct carbon fuel cell for operation below 700 °C
919
Optimization of a Distributed Cogeneration System with solar district heating
920
Optimization of a Diver Propulsion Vehicle Hydrodynamics Parameter and its’ Shape Improvement by CFD Method for Improving Underwater Speed Record
921
Optimization of a Draft Tube using Statistical Techniques- DOE and 2D Computational Fluid Dynamic Analysis
922
Optimization of a dual cycle cogeneration system based on a new exergetic performance criterion
923
Optimization of a dual cycle cogeneration system based on a new exergetic performance criterion
924
Optimization of a dual free piston Stirling engine
925
Optimization of a Dynamic Headspace – Thermal Desorption – Gas Chromatography/Mass Spectrometry procedure for the determination of furfurals in vinegars
926
Optimization of a Fe–Al–Ce nano-adsorbent granulation process that used spray coating in a fluidized bed for fluoride removal from drinking water
927
Optimization of A Fed-Batch Fermenter Producing Baker’s Yeast Using Simulated Annealing Method
928
Optimization of a fender structure for the crashworthiness design
929
Optimization of a fertilizer spreading process Original Research Article
930
Optimization of a FIA system with amperometric detection by means of a desirability function: Determination of sulfadiazine, sulfamethazine and sulfamerazine in milk
931
Optimization of a field flow pre-concentration system by experimental design for the determination of copper in sea water by flow-injection-atomic absorption spectrometry
932
Optimization of a flame-retarded polypropylene composite
933
Optimization of a flame-retarded polypropylene composite
934
Optimization of a flight-worthy scramjet combustor through CFD
935
Optimization of a flow injection analysis system for tartaric acid determination in wines
936
Optimization of a flow injection analysis system for tartaric acid determination in wines
937
Optimization of a flow injection hydride generation atomic absorption spectrometric method for the determination of arsenic, antimony and selenium in iron chloride/sulfate-based water treatment chemical
938
Optimization of a flow injection hydride generation atomic absorption spectrometric method for the determination of arsenic, antimony and selenium in iron chloride/sulfate-based water treatment chemical Original Research Article
939
Optimization of a flow reversal reactor for the catalytic combustion of lean methane mixtures
940
Optimization of a free separation of 30 free amino acids and peptides by capillary zone electrophoresis with indirect absorbance detection: a potential for quantification in physiological fluids
941
Optimization of a free-fall reactor for the production of fast pyrolysis bio-oil
942
Optimization of a fuel cell system using process integration techniques
943
Optimization of a fuel-cell manifold
944
Optimization of a full-scale dewatering operation based on the rheological characteristics of wastewater sludge
945
Optimization of a fully air-swept dry grinding cement raw meal ball mill closed circuit capacity with the aid of simulation
946
Optimization of a Functional Cookie Formulation by Using Response Surface Methodology
947
Optimization of a fuzzy controller for fruit storage using neural networks ، genetic algorithms
948
Optimization of a fuzzy logic controller for PV grid inverter control using S-function based PSO
949
Optimization of a gas chromatography--mass spectrometry method using chemometric techniques for the determination of ezetimibe in human plasma
950
Optimization of a gas metal arc welding process using the desirability function and the Tgenetic algorithm
951
Optimization of a gas turbine in the methanol process, using the NLP model
952
Optimization of a GC/MS procedure that uses parallel factor analysis for the determination of bisphenols and their diglycidyl ethers after migration from polycarbonate tableware
953
Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water
954
Optimization of a glancing angle for simultaneous trace elemental analysis by using a portable total reflection X-ray fluorescence spectrometer
955
Optimization of a glancing angle for simultaneous trace elemental analysis by using a portable total reflection X-ray fluorescence spectrometer
956
Optimization of a glucose biosensor setup based on a Ni/Al HT matrix Original Research Article
957
Optimization of a granulation and tabletting process by sequential design and multivariate analysis
958
Optimization of a green supply chain network: a case study in a pharmaceutical industry
959
Optimization of a heart-cutting multidimensional gas chromatography-based method for the assessment of enantiomeric fractions of o,p′-DDT in environmental samples
960
Optimization of a heat-integrated exhaust catalyst for CNG engines
961
Optimization of a heavy-duty compression–ignition engine fueled with diesel and gasoline-like fuels
962
Optimization of a heterogeneous catalytic hydrodynamic cavitation reactor performance in decolorization of Rhodamine B: Application of scrap iron sheets
963
Optimization of a heterogeneous catalytic hydrodynamic cavitation reactor performance in decolorization of Rhodamine B: Application of scrap iron sheets
964
Optimization of a heterologous mevalonate pathway through the use of variant HMG-CoA reductases
965
Optimization of a heterologous pathway for the production of flavonoids from glucose
966
Optimization of a high-performance liquid chromatography method for the analysis of complex polyphenol mixtures and application for sainfoin extracts (Onobrychis viciifolia)
967
Optimization of a horizontal MOCVD reactor for uniform epitaxial layer growth
968
Optimization of a hospital room by means of CFD for more efficient ventilation
969
Optimization of a hybrid chromatography-crystallization process for the separation of Trِgerʹs base enantiomers
970
Optimization of a hybrid exchange–correlation functional for silicon carbides
971
Optimization of a hybrid vibration absorber for vibration control of structures under random force excitation
972
Optimization of a hydride generation metallic furnace atomic absorption spectrometry (HG-MF-AAS) method for tin determination: Analytical and morphological parameters of a metallic atomizer
973
Optimization of a hydrocarbon fuel ignition model for two single component surrogates of diesel fuel
974
Optimization of a hydrogen purification system
975
Optimization of a hydrogen supply chain under demand uncertainty
976
Optimization of a Kenics static mixer for non-creeping flow conditions
977
Optimization of a Key Step of Synthesis of L-Acosamine and L-Daunosamine Derivatives
978
Optimization of a large-scale scallop hanging culture operation
979
Optimization of a large-scale water reservoir network by stochastic dynamic programming with efficient state space discretization
980
Optimization of a laser mitigation process in damaged fused silica
981
Optimization of a lateral flow immunoassay for the ultrasensitive detection of aflatoxin M1 in milk Original Research Article
982
Optimization of a ligand immobilization and azide group endcapping concept via “Click-Chemistry” for the preparation of adsorbents for antibody purification
983
Optimization of a lime-based sorbent for carbonation at low temperature enhanced by water vapor
984
Optimization of a linear actuator for use in a solar powered water pump
985
Optimization of a liquefaction plant using genetic algorithms
986
Optimization of a magnetic refrigerator at room temperature for air cooling systems
987
Optimization of a magnetohydrodynamic flow based on the entropy generation minimization method
988
Optimization of a matrix solid-phase dispersion method for the determination analysis of carbendazim residue in plant material
989
Optimization of a matrix solid-phase dispersion method with subsequent clean-up for the determination of ethylene bisdithiocarbamate residues in almond samples
990
Optimization of a metal honeycomb sandwich beam-bar subjected to torsion and bending
991
Optimization of a method for the simultaneous determination of glycerides, free and total glycerol in biodiesel ethyl esters from castor oil using gas chromatography
992
Optimization of a Method to Prepare Liposomes Containing HER2/Neu- Derived Peptide as a Vaccine Delivery System for Breast Cancer
993
Optimization of a microbial fuel cell for wastewater treatment using recycled scrap metals as a cost-effective cathode material
994
Optimization of a microchannel heat sink with temperature dependent fluid properties
995
Optimization of a microfluidic device for diffusion-based extraction of DMSO from a cell suspension
996
Optimization of a micro-strip gas chamber as a two-dimensional neutron detector using gadolinium converter
997
Optimization of a micro-strip gas chamber as a two-dimensional neutron detector using gadolinium converter
998
Optimization of a microwave-assisted derivatization–extraction procedure for the determination of chlorophenols in ash samples
999
Optimization of a microwave-assisted extraction large-volume injection and gas chromatography–ion trap mass spectrometry procedure for the determination of polybrominated diphenyl ethers, polybrominated biphenyls and polychlorinated naphthalenes in sedime
1000
Optimization of a microwave-assisted extraction method for the analysis of polychlorinated biphenyls in ash samples