<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Preparation and characterization of SLNs (W/O/W type) contained lipoic acid PEG ester by variation lipid
2
Preparation and characterization of Sm0.2Ce0.8O1.9/Na2CO3 nanocomposite electrolyte for low-temperature solid oxide fuel cells
3
Preparation and Characterization of Small Silica-Supported Iridium Particles from Iridium Trisacetylacetonate Precursor
4
Preparation and characterization of SnO nanowhiskers
5
Preparation and characterization of SnO2 and Cu-doped SnO2 thin films using electrostatic spray deposition (ESD)
6
Preparation and characterization of SnO2 and WOx–SnO2 nanosized powders and thick films for gas sensing
7
Preparation and Characterization of SnO2 Nanoparticles by Hydrothermal Route
8
Preparation and characterization of SnO2 nanoparticles in aqueous solution of [EMIM][EtSO4] as a low cost ionic liquid using ultrasonic irradiation
9
Preparation and characterization of SnO2 nanoparticles of enhanced thermal stability: The effect of phosphoric acid treatment on SnO2·nH2O
10
Preparation and characterization of SnO2 nanoparticles using high power pulsed laser
11
Preparation and characterization of SnO2/ZnO/TiO2 composite semiconductor with enhanced photocatalytic activity
12
Preparation and characterization of SnO2-BiVO4-CuO catalyst and kinetics of phenazopyridine photodegradation
13
Preparation and characterization of SnO–P2O5 glasses as anode materials for lithium secondary batteries
14
Preparation and characterization of SnS nanocrystals by a triethanolamine-assisted diethylene glycol solution synthesis
15
Preparation and characterization of sodium alginate modified with collagen peptides
16
Preparation and characterization of sodium bearing perovskite phases
17
Preparation and characterization of sodium carboxymethylcellulose/poly(N-isopropylacrylamide)/clay semi-IPN nanocomposite hydrogels
18
Preparation and characterization of sodium caseinate films reinforced with cellulose derivatives
19
Preparation and characterization of sodium dodecyl sulfate doped polypyrrole solid phase micro extraction fiber and its application to endocrine disruptor pesticide analysis
20
Preparation and characterization of sodium titanate nanowires from brookite nanocrystallites
21
Preparation and characterization of sol–gel Al2O3/Ni–P composite coatings on carbon steel
22
Preparation and characterization of sol–gel Al-doped ZnO thin films and ZnO nanowire arrays grown on Al-doped ZnO seed layer by hydrothermal method
23
Preparation and characterization of sol–gel bioactive glass coating for improvement of biocompatibility of human body implant
24
Preparation and Characterization of Sol-Gel Coatings Doping with Cerium Ingredients on Aluminum Alloy Surface
25
Preparation and characterization of sol–gel derived (1 0 0)-textured Pb(Zr,Ti)O3 thin films: PbO seeding role in the formation of preferential orientation Original Research Article
26
Preparation and characterization of sol–gel derived (Li,Ta,Sb) modified (K,Na)NbO3 lead-free ferroelectric thin films
27
Preparation and characterization of sol–gel derived mesoporous titania spheroids
28
Preparation and characterization of sol–gel derived zirconia coated carbon fiber
29
Preparation and characterization of sol–gel derived ZnTiO3 nanocrystals
30
Preparation and characterization of solid biomass fuel made from rice straw and rice bran
31
Preparation and characterization of solid dispersions of carvedilol with PVP K30
32
Preparation and characterization of solid electrolytes La2−xAxMo2−yWyO9 (A=Sm, Bi)
33
Preparation and characterization of solid polymer electrolytes based on PHEMO and PVDF-HFP
34
Preparation and characterization of soluble methyl-β-cyclodextrin functionalized single-walled carbon nanotubes
35
Preparation and characterization of some ferromagnetic glass–ceramics contains high quantity of magnetite
36
Preparation and characterization of some gold nanometric compounds with simple organic materials as precursor: Spectroscopic, biological and anti-cancer assessments
37
Preparation and characterization of some graphene based nanocomposite materials
38
Preparation and Characterization of Some Metal Complexes with Heterocyclic Azo Ligand (4-SuBAI)
39
Preparation and Characterization of Some Metal Complexes with New Heterocyclic Schiff-Azo Ligand
40
Preparation and characterization of some structural variants of Cp*Ti(1,2-propandiolato) complexes
41
Preparation and characterization of some substituted bioglasses and their ceramic derivatives from the system SiO2–Na2O–CaO–P2O5 and effect of gamma irradiation
42
Preparation and Characterization of Some Transition Metal Complexes with ( N ,S ,O) New Schiff Base Ligand
43
Preparation and characterization of sorbitol modified nanoclay with high amylose bionanocomposites
44
Preparation and characterization of space durable polymer nanocomposite films
45
Preparation and characterization of spark-anodized Al-alloys: Physical, chemical and tribological properties
46
Preparation and characterization of SPEEK/MMT-STA composite membrane for DMFC application
47
Preparation and characterization of spermine-exchanged montmorillonite and interaction with the herbicide fluometuron
48
Preparation and characterization of spherical activated carbons from oil agglomerated bituminous coals for removing organic impurities from water Original Research Article
49
Preparation and characterization of spherical Li1+xV3O8 cathode material for lithium secondary batteries
50
Preparation and characterization of spherical nickel-doped carbonaceous resin as hydrogenation catalysts I. Carbonization procedures Original Research Article
51
Preparation and characterization of spherical nickel-doped carbonized resin as hydrogenation catalysts: II. Thermal decomposition of resin and preparation of metal-doped catalysts with different nickel loadings Original Research Article
52
Preparation and characterization of spherical polymer packings from polybutadiene for size-exclusion chromatography
53
Preparation and characterization of spherical silica–porphyrin catalysts obtained by the sol–gel methodology
54
Preparation and characterization of spinel LiCoxMn2−xO4 by oxalate precipitation
55
Preparation and characterization of spinel nickel ferrite obtained by the soft mechanochemically assisted synthesis
56
Preparation and characterization of spinel-type MeFe2O4 (Me = Cu, Cd, Ni and Zn) for catalyst applications
57
Preparation and characterization of sponge film made from feathers
58
Preparation and characterization of sponge-like composites by cross-linking hyaluronic acid and carboxymethylcellulose sodium with adipic dihydrazide
59
Preparation and characterization of spray deposited NiMoO4 thin films for photovoltaic electrochemical studies
60
Preparation and characterization of spray deposited n-type WO3 thin films for electrochromic devices
61
Preparation and characterization of spray deposited photoactive Sb2S3 and Sb2Se3 thin films using aqueous and non-aqueous media
62
Preparation and characterization of spray pyrolyzed nickel oxide (NiO) thin films
63
Preparation and characterization of spray-deposited Cu2ZnSnS4 thin films
64
Preparation and characterization of sputtered Cu films containing insoluble Nb
65
Preparation and characterization of squeeze cast-Al–Si piston alloy reinforced by Ni and nano-Al_2 O_3 particles
66
Preparation and characterization of Sr4Al2O7:Eu3+, Eu2+ phosphors
67
Preparation and characterization of SrCo0.8Fe0.2O3−δ–SrSnO3 oxygen-permeable composite membrane
68
Preparation and characterization of SrFeCo0.5O3.25+δ by gelcasting
69
Preparation and characterization of Sr–hardystonite (Sr2ZnSi2O7) for bone repair applications
70
Preparation and characterization of SrSnO3 nanorods Original Research Article
71
Preparation and characterization of Sr-Ti-hardystonite (Sr-Ti-HT) nanocomposite for bone repair application
72
Preparation and characterization of SrTiO3/BaTiO3 thin multilayer films deposited on Pt/Ti/SiO2/Si substrate by radio frequency magnetron sputtering
73
Preparation and characterization of stable chitosan nanofibrous membrane for lipase immobilization
74
Preparation and characterization of stable cross-linked enzyme aggregates of novel laccase enzyme from Shewanella putrefaciens and using malachite green decolorization
75
Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment Original Research Article
76
Preparation and characterization of stable monodisperse silver nanoparticles via photoreduction
77
Preparation and Characterization of Stable Nanoliposomal Formulation of Fluoxetine as a Potential Adjuvant Therapy for Drug-Resistant Tumors
78
Preparation and characterization of stable Ru nanoparticles embedded on the ordered mesoporous carbon material for applications in Fischer–Tropsch synthesis Original Research Article
79
Preparation and characterization of starch crosslinked with sodium trimetaphosphate and hydrolyzed by enzymes
80
Preparation and characterization of starch nanoparticles through ultrasonic-assisted oxidation methods
81
Preparation and characterization of starch/carrageenan edible films
82
Preparation and characterization of starch/cyclodextrin bioadhesive microspheres as platform for nasal administration of Gabexate Mesylate (Foy®) in allergic rhinitis treatment
83
Preparation and characterization of starch/poly(l-lactic acid) hybrid foams
84
Preparation and characterization of starch-grafted multiwall carbon nanotube composites
85
Preparation and characterization of starch-poly-ε-caprolactone microparticles incorporating bioactive agents for drug delivery and tissue engineering applications
86
Preparation and characterization of strontium and magnesium doped lanthanum gallates as the electrolyte for IT-SOFC
87
Preparation and characterization of strontium zirconate (SrZrO3) fine powders
88
Preparation and Characterization of Structure and Corrosion Resistivity of Polyurethane /Montmorillonite/Cerium Nitrate Nanocomposites
89
Preparation and characterization of subcellular fractions suitable for studies of xenobiotic metabolism from leaf sheaths of a marine seagrass: Posidonia oceanica (Linnaeus) Delile
90
Preparation and characterization of sub-micro LiNi0.5−xMn1.5+xO4 for 5 V cathode materials synthesized by an ultrasonic-assisted co-precipitation method
91
Preparation and characterization of substituted pentaarylcyclopentadienyliron dicarbonyl bromide complexes containing methyl or fluorine substituents on the arene rings
92
Preparation and characterization of succinic acid deamidated wheat gluten microspheres for encapsulation of fish oil
93
Preparation and Characterization of Sugar Cane Wax Microspheres Containing Indomethacin
94
Preparation and characterization of sulfated carboxymethyl cellulose nanofiltration membranes with improved water permeability Original Research Article
95
Preparation and characterization of sulfated zirconia (SO42−/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity
96
Preparation and characterization of sulfated zirconia catalysts obtained via various procedures Original Research Article
97
Preparation and characterization of sulfonated amine-poly(ether sulfone)s for proton exchange membrane fuel cell
98
Preparation and characterization of sulfonated PEEK-WC membranes for fuel cell applications: A comparison between polymeric and composite membranes
99
Preparation and characterization of sulfonated poly(arylene ether ketone ketone sulfone)s for ion exchange membranes Original Research Article
100
Preparation and characterization of sulfonated poly(ether ether ketone ketone) proton exchange membranes for fuel cell application
101
Preparation and characterization of sulfonated poly(ether sulfone)/sulfonated poly(ether ether ketone) blend membrane for vanadium redox flow battery
102
Preparation and characterization of sulfonated poly(tetra phenyl ether ketone sulfone)s for proton exchange membrane fuel cell
103
Preparation and characterization of sulfonated polyethersulfone for cation-exchange membranes
104
Preparation and characterization of sulfonated polyethersulfone membranes by a facile approach
105
Preparation and characterization of sulfonated polysulfone and N-phthloyl chitosan blend composite cation-exchange membrane for desalination Original Research Article
106
Preparation and characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells
107
Preparation and characterization of sulfonic acid-functionalized single-walled carbon nanotubes
108
Preparation and characterization of sulfonyl-hydrazine attached poly(styrene-divinylbenzene) beads for separation of albumin
109
Preparation and characterization of sulfur–polypyrrole composites with controlled morphology as high capacity cathode for lithium batteries
110
Preparation and characterization of super-hydrophilic porous TiO2 coating films
111
Preparation and characterization of superhydrophobic conductive fluorinated carbon blacks Original Research Article
112
Preparation and characterization of superhydrophobic silica-based surfaces by using polypropylene glycol and tetraethoxysilane precursors
113
Preparation and characterization of superionic materials in a new mixed system (Cu(1−x)AgxI)–(Ag2O)–(P2O5), (0.05≤x≤0.25)
114
Preparation and characterization of superparamagnetic nanocomposites of aluminosilicate/silica/magnetite
115
Preparation and characterization of superporous agarose–reticulated vitreous carbon electrodes as platforms for electrochemical bioassays Original Research Article
116
Preparation and characterization of superporous hydrogels as gastroretentive drug delivery system for rosiglitazone maleate
117
Preparation and Characterization of Supported Bimetallic Pt–Au and Pt–Cu Catalysts from Bimetallic Molecular Precursors
118
Preparation and characterization of supported dense oxygen permeating membrane of mixed conductor La2NiO4+δ
119
Preparation and characterization of supported H3PW12O40 on silica gel: a potential catalyst for green chemistry processes
120
Preparation and Characterization of Supported Molybdenum and Tungsten Schiff Base Complexes on MCM-41 as Nanocatalysts for the Epoxidation of Olefins
121
Preparation and Characterization of Supported Molybdenum and Tungsten Schiff Base Complexes on MCM-41 as Nanocatalysts for the Epoxidation of Olefins
122
Preparation and characterization of supported Pt–Ru catalysts with a high Ru content
123
Preparation and characterization of surface bond-conjugated TiO2/SiO2 and photocatalysis for azo dyes
124
Preparation and characterization of surface crosslinked TPS/PVA blend films
125
Preparation and characterization of surface crosslinked TPS/PVA blend films
126
Preparation and characterization of surface modified electrospun membranes for higher filtration flux
127
Preparation and characterization of surface modified silica nanoparticles with organo-silane compounds
128
Preparation and characterization of surface modified γ-Fe2O3 (maghemite)–silica nanocomposites used for the purification of benzaldehyde lyase Original Research Article
129
Preparation and characterization of surface-sulfonated phenylsilsesquioxane–methylsilsesquioxane particles
130
Preparation and characterization of surfactant-induced nanoporous PMMA film
131
Preparation and characterization of swelling porous carbon beads Original Research Article
132
Preparation and characterization of symmetrical bis[4-chloro-2-pyrimidyl] dichalcogenide (S, Se, Te) and unsymmetrical 4-chloro-2-(arylchalcogenyl) pyrimidine: X-ray crystal structure of 4-chloro-2-(phenylselanyl) pyrimidine and 2-(p-tolylselanyl)-4-chlor
133
Preparation and characterization of TaCxN1 − x coatings on biomedical 316L stainless steel
134
Preparation and Characterization of Tamarind Gum/Sodium Alginate Composite Gel Beads
135
Preparation and characterization of Tamoxifen loaded silica and NH2 functionalized mesoporous silica nanoparticles as delivery systems against MCF-7 breast cancer cells
136
Preparation and characterization of TaNbTiW multi-element alloy films
137
Preparation and characterization of tantalum/polyaniline composite based chemiresistor type sensor for hydrogen gas sensing application
138
Preparation and characterization of Tb3+ and Tb(sal)3·nH2O doped PC:PMMA blend
139
Preparation and Characterization of Technetium Complexes with Schiff Base and Phosphine Coordination,1. Complexes of Technetium-99g and -99m with Substituted acac2en and Trialkyl Phosphines (where acac2en = N ,N ethylenebis[acetylacetone iminato] )
140
Preparation and characterization of telluride glasses
141
Preparation and characterization of temperature and pH-sensitive chitosan material and its controlled release on coenzyme A
142
Preparation and characterization of temperature-responsive poly(N-isopropylacrylamide-co-N,N′-methylenebisacrylamide) monolith for HPLC
143
Preparation and characterization of template-free mordenite type zeolite and comparison of m-xylene isomerization reaction over mordenite and SAPO-11
144
Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups
145
Preparation and characterization of TeO2–WO3–Li2O glasses
146
Preparation and characterization of ternary blends composed of polylactide, poly(ɛ-caprolactone) and starch
147
Preparation and characterization of tetragonal dominant nanocrystalline ZrO2 obtained via direct precipitation
148
Preparation and Characterization of Tetragonal Zirconium Oxide Nanocrystals from Isophthalic Acid-Zirconium(IV) Nanocomposite As a New Precursor
149
Preparation and characterization of tetragonal-ZrO2 nanopowders by a molten hydroxides method
150
Preparation and characterization of thallium(I) doped molybdenum heteropolyoxometalate semiconducting thin films
151
Preparation and characterization of the 1:1 adducts of mercury(II) halides with N-benzyl- and N-p-tolyl-2-oxo-1-naphthylideneamine. The crystal and molecular structures of two isostructural di-μ-halo-bis[halo(N-benzyl-2-oxo-1-naphthylideneamine)mercury(II
152
Preparation and characterization of the amorphous tungsten cone field emitter arrays by Ar+ etching
153
Preparation and characterization of the antimony telluride hexagonal nanoplates
154
Preparation and characterization of the bimetallic Pt–Au/ZnO/Al2O3 catalysts: Influence of Pt–Au molar ratio on the catalytic activity for toluene oxidation
155
Preparation and characterization of the bismuth sodium titanate (Na0.5Bi0.5TiO3) ceramic doped with ZnO
156
Preparation and characterization of the carbonized material of phenol–formaldehyde resin with addition of various organic substances Original Research Article
157
Preparation and characterization of the carbon–Microsilica composite sorbent
158
Preparation and Characterization of the Catalyst Based on the Copper Nanoparticles
159
Preparation and characterization of the CdS/PSA core-shell “egg”
160
Preparation and characterization of the electrodeposited Cr–Al2O3/SiC composite coating
161
Preparation and characterization of the electrodeposited Fe–Cr alloy film
162
Preparation and characterization of the electrospun PCS/TiO2 fiber mat by electron beam irradiation
163
Preparation and characterization of the endohedral metallofullerene Lu@C82 Original Research Article
164
Preparation and characterization of the first coordination compounds of tetrazol-2-ylacetic acid
165
Preparation and characterization of the graft copolymer of chitosan with poly[rosin-(2-acryloyloxy)ethyl ester]
166
Preparation and characterization of the graft copolymer of chitosan with poly[rosin-(2-acryloyloxy)ethyl ester]
167
Preparation and characterization of the graphene–carbon nanotube/CoFe2O4/polyaniline composite with reticular branch structures
168
Preparation and Characterization of the Inter-Polymer Complexes between Polyallylamine Hydrochloride and Polyvinyl Sulfonic Acid
169
Preparation and characterization of the intumescent fire retardant coating with a new flame retardant
170
Preparation and characterization of the ITO surface and the Al/Alq3/ITO heterostructure for OLEDs
171
Preparation and characterization of the layered borophosphates MII(H2O)2[B2P2O8(OH)2]·H2O (MII = Fe, Co, Ni)
172
Preparation and characterization of the layered hybrids (CnH2n+1NH3)2FeCl4 Original Research Article
173
Preparation and characterization of the lead-free piezoelectric ceramic of Bi0.5Na0.5TiO3 doped with CuO
174
Preparation and characterization of the Mo(C)N/Mo(C) multilayer coating
175
Preparation and characterization of the novel water-crosslinked cellulose reinforced poly(butylene succinate) composites
176
Preparation and characterization of the organic–inorganic hybrid membrane for biodiesel production
177
Preparation and characterization of the pentacyanoferrate(II) on the surface of N-(4pyridilmethylidene)chitosan
178
Preparation and characterization of the perovskites BaCe1 − xBixO3
179
Preparation and characterization of the self-aggregated dimer of meso-p-hydroxyphenylporphyrin and studies on the self-aggregate reaction mechanism
180
Preparation and characterization of the simulated burnup americium-containing uranium–plutonium mixed oxide fuel
181
Preparation and characterization of the sol–gel nano-bioactive glasses modified by the coupling agent gamma-aminopropyltriethoxysilane
182
Preparation and characterization of the spinel oxide ZnCo2O4 obtained by sol–gel method
183
Preparation and characterization of the TiO2 ultrafine particles by detonation method
184
Preparation and characterization of the TiO2/polymer complex nanomaterial
185
Preparation and characterization of the titanium dioxide thin films used for pH electrode and procaine drug sensor by sol–gel method
186
Preparation and Characterization of Theophylline-Chitosan Beads as an Aapproach to Colon Delivery
187
Preparation and characterization of thermal/pH-sensitive hydrogel from carboxylated nanocrystalline cellulose
188
Preparation and characterization of thermally crosslinked chlorine resistant thin film composite polyamide membranes for reverse osmosis Original Research Article
189
Preparation and characterization of thermally evaporated titanium phthalocyanine dichloride thin films Original Research Article
190
Preparation and characterization of thermally stable poly(piperazine amide)/PPBES composite nanofiltration membrane
191
Preparation and characterization of thermally stable proton-conducting composite sheets composed of phosphosilicate gel and polyimide
192
Preparation and characterization of thermoplastic olefin/nanosilica composites using a silane-grafted polypropylene matrix
193
Preparation and characterization of thermo-responsive amphiphilic triblock copolymer and its self-assembled micelle for controlled drug release
194
Preparation and Characterization of Thermoresponsive In-situ Forming Poloxamer Hydrogel for Controlled Release of Nile red-loaded Solid Lipid Nanoparticles
195
Preparation and characterization of thermosensitive magnetic particles
196
Preparation and characterization of thermosensitive magnetic particles
197
Preparation and characterization of thermosensitive organic–inorganic hybrid microgels with functional Fe3O4 nanoparticles as crosslinker
198
Preparation and characterization of thermosensitive pluronic F127-b-poly(ɛ-caprolactone) mixed micelles
199
Preparation and characterization of thick porous SiO2 film for multilayer pyroelectric thin film IR detector
200
Preparation and characterization of thin electrodes for lead–acid batteries
201
Preparation and characterization of thin film nanocomposite membrane for pervaporative dehydration of aqueous alcohol solutions Original Research Article
202
Preparation and characterization of thin films by plasma polymerization of glycidoxypropyltrimethoxysilane at different plasma powers and exposure times
203
Preparation and characterization of thin films of electrodeposited CdTe semiconductors
204
Preparation and characterization of thin transducer layers sensitive to free chlorine in water
205
Preparation and characterization of thin-film nanocomposite membranes embedded with poly(methyl methacrylate) hydrophobic modified multiwalled carbon nanotubes by interfacial polymerization
206
Preparation and characterization of thiocyanate-selective electrodes based on new complexes of copper(II) as neutral carriers Original Research Article
207
Preparation and characterization of thiophene copolymers with second order non-linear optical properties
208
Preparation and characterization of thiophilic cryogels with 2-mercapto ethanol as the ligand for IgG purification
209
Preparation and characterization of three charge-transfer complexes
210
Preparation and characterization of three new charge transfer complexes of C60-tetracyanoethyleneoxide with tetrathiafulvalene derivatives
211
Preparation and characterization of three types of dinuclear iron(III) complexes with H2salbn, N,N′-disalicylidene-1,4-diaminobutane
212
Preparation and characterization of three-dimensional braided carbon/Kevlar/epoxy hybrid composites
213
Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process
214
Preparation and characterization of three-dimensional mesoporous crystals of tungsten oxide
215
Preparation and characterization of three-dimensionally ordered macroporous styrene/p-methylstyrene syndiotactic copolymer
216
Preparation and characterization of three-dimensionally ordered macroporous syndiotactic poly(p-methylstyrene)
217
Preparation and characterization of three-dimensionally ordered macroporous yttria-stabilized zirconia by aqueous organic gel route
218
Preparation and characterization of Ti and V modified analcime from local kaolin
219
Preparation and characterization of Ti(C,N)-based nano-cermets
220
Preparation and characterization of Ti3SiC2 powder
221
Preparation and characterization of TiN coatings produced by combination of PI3D and ICP assisted magnetron PVD
222
Preparation and characterization of tin diselenide thin film by spray pyrolysis technique
223
Preparation and characterization of TiN films by electron cyclotron resonance (ECR) sputtering for diffusion barrier applications
224
Preparation and Characterization of Tin Oxide Nanowires
225
Preparation and characterization of tin oxide, SnO2 nanoparticles decorated graphene
226
Preparation and characterization of tin-based three-dimensional cellular anode for lithium ion battery
227
Preparation and characterization of TiO2 coated with a thin carbon layer for enhanced photocatalytic activity under fluorescent lamp and solar light irradiations Original Research Article
228
Preparation and characterization of TiO2 Fe2O3 nanocomposite by sol gel method
229
Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method
230
Preparation and characterization of TiO2 nanosponge
231
Preparation and characterization of TiO2 photocatalysts co-doped with iron (III) and lanthanum for the degradation of organic pollutants
232
Preparation and characterization of TiO2 thin films using vacuum ultraviolet light in a sol–gel process
233
Preparation and characterization of TiO2, ZnO, and TiO2/ZnO nanofilms via sol–gel process
234
Preparation and characterization of TiO2/porous carbon multilayers
235
Preparation and characterization of TiO2-based plasma-sprayed coatings for NOx abatement
236
Preparation and characterization of TiO2-cationic hybrid nanoparticles as electrophoretic particles
237
Preparation and Characterization of TiO2-LaFeO3 based Mixed Matrix Membrane for Oily Wastewater Treatment
238
Preparation and characterization of TiO2-NTs/SnO2-Sb electrodes by electrodeposition
239
Preparation and characterization of TiO2-PEG NPs loaded doxorubicin
240
Preparation and characterization of TiO2-regenerated cellulose inorganic–polymer hybrid membranes for dehydration of caprolactam
241
Preparation and characterization of TiO2–SiO2 nano-composite thin films
242
Preparation and characterization of Ti-supported nanostructured Pt electrodes by electrophoretic deposition
243
Preparation and characterization of titanate nanotubes/carbon composites
244
Preparation and characterization of titanate-modified Boehmite–polyamide-6 nanocomposites
245
Preparation and characterization of titania- and organo-pillared clay hybrid photocatalysts capable of oxidizing aqueous bisphenol A under visible light
246
Preparation and characterization of titania based nanowires
247
Preparation and characterization of titania nanoparticle produced from Ti-flocculated sludge with paper mill wastewater
248
Preparation and characterization of titanium dioxide core and polymer shell hybrid composite particles prepared by two-step dispersion polymerization
249
Preparation and characterization of titanium dioxide nanoparticle/polystyrene composites via radical polymerization
250
Preparation and characterization of titanium dioxide thin films by SILAR method
251
Preparation and characterization of titanium dioxide nanocomposite fibers
252
Preparation and characterization of titanium oxy-nitride thin films
253
Preparation and characterization of translucent PLZT8/65/35 ceramics from nano-sized powders produced by a high-energy ball-milling process
254
Preparation and characterization of transparent conductive ZnO:Ga films by DC reactive magnetron sputtering
255
Preparation and Characterization of Transparent Electrochromic Ti02 Thin Films Prepared by Alkoxide Route
256
Preparation and characterization of transparent Eu doped Y2O3 aerogel monoliths, for application in luminescence
257
Preparation and characterization of transparent polyarylethers-silica hybrid membranes with covalently connected phases
258
Preparation and characterization of transparent silk fibroin/cellulose blend films
259
Preparation and characterization of transparent Tm:YAG ceramics
260
Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency
261
Preparation and characterization of transparent/conductive nano-composites films
262
Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides
263
Preparation and characterization of triangular clusters [M3Q4(acac)3(py)3]+ (M=Mo, W; Q=S, Se)
264
Preparation and characterization of trifluoroethyl aliphatic carboxylates as co-solvents for the carbonate-based electrolyte of lithium-ion batteries
265
Preparation and characterization of trifluoromethylaniline oligomers
266
Preparation and characterization of trilobal activated carbon fibers Original Research Article
267
Preparation and Characterization of Trimethyl Chitosan Nanospheres Encapsulated with Tetanus Toxoid for Nasal Immunization Studies
268
Preparation and characterization of tubular ceramic membranes for treatment of oil emulsions
269
Preparation and characterization of tubular porous silicon carbide membrane supports
270
Preparation and characterization of tunable YVO4: Bi3+, Sm3+ phosphors
271
Preparation and Characterization of Tungsten-substituted Molybdenum Disulfide Nanorods
272
Preparation and Characterization of Two Azo Dyes For Dibenzothiophen by The Diazotization Reaction and Studying Their action as Acid-Base Indicators.
273
Preparation and characterization of two novel three-dimensional supramolecular networks with blue photoluminescence
274
Preparation and characterization of two supramolecular complexes with 5-amino-2,4,6-triiodoisophthalic acid under N-donor auxiliary ligand intervention
275
Preparation and characterization of Type II anion exchange membranes from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)
276
Preparation and characterization of ultra thin LB films using pyrazoline organic nanoparticles
277
Preparation and characterization of ultra violet (UV) radiation cured bio-degradable films of sago starch/PVA blend
278
Preparation and characterization of ultrafiltration membranes for toxic removal from wastewater Original Research Article
279
Preparation and characterization of ultrafine alumina via sol–gel polymeric route
280
Preparation and characterization of ultrafine cobalt powders and supported cobalt catalysts by freeze-drying
281
Preparation and characterization of ultrathin alumina hollow fiber microfiltration membrane Original Research Article
282
Preparation and characterization of ultrathin polymeric films
283
Preparation and Characterization of Undecylenoyl Phenylalanine Loaded-Nanostructure Lipid Carriers (NLCs) as a New α-MSH Antagonist and Antityrosinase Agent
284
Preparation and characterization of uniform polyaniline nano-fibrils using the anodic aluminum oxide template
285
Preparation and characterization of uniform polyaniline nano-fibrils using the anodic aluminum oxide template
286
Preparation and characterization of uniformly coated particles by homogeneous precipitation (cobalt compounds on nickel compounds)
287
Preparation and characterization of uniform-sized chitosan microspheres containing insulin by membrane emulsification and a two-step solidification process
288
Preparation and characterization of uniform-sized chitosan/silver microspheres with antibacterial activities
289
Preparation and characterization of unique zirconia crystals within pores via a sol–gel-hydrothermal method
290
Preparation and characterization of upconversion luminescent LaF3:Yb3+,Er3+/LaF3 core/shell nanocrystals
291
Preparation and characterization of upconversion nanocomposite for β-NaYF4:Yb3+,Er3+-supported TiO2 nanobelts
292
Preparation and Characterization of UPR/LNR/Glass Fiber Composite by using UnsaturatedPolyester Resin (PET) from PET Wastes
293
Preparation and characterization of UV-curable polymeric support for covalent immobilization of xylanase enzyme
294
Preparation and characterization of UV-cured epoxy nanocomposites based on o-montmorillonite modified with maleinized liquid polybutadienes
295
Preparation and characterization of UZM-5/polyamide thin film nanocomposite membrane for dewaxing solvent recovery
296
Preparation and characterization of V/TiO2 nanocatalyst with magnetic nucleus of iron
297
Preparation and characterization of V2O3 micro-crystals via a one-step hydrothermal process
298
Preparation and characterization of vacuum deposited semiconducting nanocrystalline polymeric thin film sensors for detection of HCl
299
Preparation and characterization of V-Ag-O catalysts for the selective oxidation of toluene Original Research Article
300
Preparation and characterization of vanadia–titania mixed oxide for immobilization of Serratia rubidaea CCT 5732 and Klebsiella marcescens bacteria
301
Preparation and characterization of vanadyl phosphates modified with two trivalent metal cations
302
Preparation and characterization of vancomycin releasing PHBV coated 45S5 Bioglass®-based glass–ceramic scaffolds for bone tissue engineering
303
Preparation and Characterization of Various Membrane Morphologies for Lateral Flow Immunoassay Development
304
Preparation and characterization of vinyl-functionalized carbon spheres by allylamine
305
Preparation and characterization of vinyl-functionalized mesoporous organosilica-coated solid-phase microextraction fiber
306
Preparation and characterization of vinyltriethoxysilane (VTES) modified silicalite-1/PDMS hybrid pervaporation membrane and its application in ethanol separation from dilute aqueous solution
307
Preparation and characterization of visible light responsive Fe2O3–TiO2 composites
308
Preparation and Characterization of Visible-Light-Driven Carbon-Sulfur-Codoped TiO2 Photocatalysts
309
Preparation and characterization of visible-light-driven europium doped mesoporous titania photocatalyst
310
Preparation and characterization of visible-light-driven N–F–Ta tri-doped TiO2 photocatalysts
311
Preparation and characterization of visible-light-driven plasmonic photocatalyst Ag/AgCl/TiO2 nanocomposite thin films
312
Preparation and characterization of visible-light-driven titania photocatalyst co-doped with boron and nitrogen
313
Preparation and characterization of vitexin powder micronized by a supercritical antisolvent (SAS) process
314
Preparation and characterization of vitrified glass matrix for high level waste from MOX fuel processing
315
Preparation and Characterization of VO2 Nanopowders
316
Preparation and characterization of VOx/TiO2 catalytic coatings on stainless steel plates for structured catalytic reactors Original Research Article
317
Preparation and characterization of water in oil emulsion via drop break-off
318
Preparation and characterization of water soluble poly(acrylic acid)–hydroxypropyl cellulose composite
319
Preparation and characterization of water soluble poly(acrylic acid)–hydroxypropyl cellulose composite
320
Preparation and characterization of waterborne polyurethane/attapulgite nanocomposites
321
Preparation and characterization of water-soluble monodisperse magnetic iron oxide nanoparticles via surface double-exchange with DMSA
322
Preparation and characterization of water-soluble N-alkylated chitosan
323
Preparation and characterization of water-soluble N-alkylated chitosan
324
Preparation and characterization of water-soluble ZnSe:Cu/ZnS core/shell quantum dots
325
Preparation and characterization of weak-base anion exchange membrane
326
Preparation and characterization of well-dispersed and stable Co/SiO2 catalysts using the ammonia method Original Research Article
327
Preparation and characterization of well-dispersed waterborne polyurethane/CaCO3 nanocomposites
328
Preparation and characterization of well-ordered MoOx films on Cu3Au(1 0 0)–oxygen substrate (CAOS)
329
Preparation and characterization of well-ordered, thin niobia films on a metal substrate
330
Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites
331
Preparation and characterization of whey protein isolate films reinforced with porous silica coated titania nanoparticles Original Research Article
332
Preparation and Characterization of WO3 Electrochromic Films Obtained by the Sol-Gel Process
333
Preparation and Characterization of WO3 Nanosheets and Au/WO3 Nanocomposite for Rabid Photocatalytic degradation of methylene blue dye
334
Preparation and Characterization of Wood Dust Natural Fiber Re-Enforced Polymer Composite
335
Preparation and characterization of WOx/ZrO2 nanosized catalysts with high WOx dispersion threshold and acidity
336
Preparation and Characterization of W-Type Hexaferrite Doped with La3+
337
Preparation and characterization of xerogel catalyst microspheres
338
Preparation and characterization of Y2O3 hollow spheres
339
Preparation and characterization of Y2O3:Eu phosphors by combustion process
340
Preparation and characterization of Y2O3–Sm2O3 co-doped ceria electrolyte for IT-SOFCs
341
Preparation and characterization of Y2Zr2O7 nanocrystals and their photocatalytic properties
342
Preparation and Characterization of Y3A5O12: Cr3+ Nanophosphor by Electrochemical Technique
343
Preparation and characterization of Y3Al5O12 (YAG) nano-powder by co-precipitation method
344
Preparation and characterization of Y3Al5O12:Ln (Ln=Eu, Ce) phosphor powders by ultrasonic atomization and co-precipitation process
345
Preparation and Characterization of Y3Sc2Ga3O12 Nano-Polycrystalline Powders by Co-Precipitation Method
346
Preparation and characterization of YADH-bound magnetic nanoparticles
347
Preparation and characterization of Yb:Y3Al5O12 fiber crystals
348
Preparation and characterization of Yb2O3–Al2O3 glasses by the Pechini sol–gel method combined with flame synthesis
349
Preparation and characterization of yellow-green fluorescence emitting SiC-encapsulated graphite
350
Preparation and characterization of yttria-stabilized zirconia nanotubes
351
Preparation and Characterization of Yttrium Oxide Nanoparticles at Different Calcination Temperatures from Yttrium Hydroxide Prepared by Hydrothermal and Hydrothermal microwave Methods
352
Preparation and characterization of zein/chitosan complex for encapsulation of α-tocopherol, and its in vitro controlled release study
353
Preparation and characterization of zeolite catalysts for etherification reaction
354
Preparation and Characterization of Zeolite Membrane for Bioethanol Purification
355
Preparation and characterization of zero valent iron powders via transfer type reductor using iron oxide from the acid regeneration process
356
Preparation and characterization of zinc hydroxide carbonate and porous zinc oxide particles
357
Preparation and characterization of zinc oxide nanoparticles and their sensor applications for electrochemical monitoring of nucleic acid hybridization
358
Preparation and characterization of zinc sulfide nanoparticles under high-gravity environment
359
PREPARATION AND CHARACTERIZATION OF ZINC(II) AND NICKEL(II) PHENYLETHANOLDITHIOCARBAMATE
360
Preparation and characterization of zinc-exchanged montmorillonite and its effectiveness as aflatoxin B1 adsorbent
361
Preparation and characterization of zirconium films for first mirror application in fusion devices
362
Preparation and characterization of zirconium oxide particles filled acrylonitrile-methyl acrylate-sodium sulfonate acrylate copolymer hybrid membranes Original Research Article
363
Preparation and characterization of Zn substituted Li–Mg ferrites
364
Preparation and characterization of Zn18O/Zn16O isotope heterostructure thin films
365
Preparation and characterization of Zn2SiO4: Mn phosphors with hydrothermal methods
366
Preparation and characterization of ZnGa2O4:Mn phosphors by multistage precipitation method
367
Preparation and characterization of ZnIn2S4 thin films deposited by spray pyrolysis for hydrogen production
368
Preparation and Characterization of ZnO and CdWO4 Nanopowders for Radiation Sensing
369
Preparation and Characterization of ZnO Nanocrystalline for Photovoltaic Applications Using Laser Ablation Technique
370
Preparation and Characterization of ZnO Nanocrystallines in the Presence of an Ionic Liquid Using Microwave Irradiation and Photocatalytic Activity
371
Preparation and characterization of ZnO nanofibers by using electrospun PVA/zinc acetate composite fiber as precursor
372
Preparation and Characterization of ZnO Nanoparticles by Laser Ablation in NaOH Aqueous Solution
373
Preparation and characterization of ZnO nanoparticles using functionalized SBA-15 with 3-aminopropyltriethoxysilane (APTS) as a host
374
Preparation and Characterization of ZnO Nanoparticles via Thermal Decomposition from Zinc(II) Schiff Base Complex as New Precursor
375
Preparation and characterization of ZnO nanorods grown into aligned TiO2 nanotube array
376
Preparation and characterization of ZnO nanorods from NaOH solutions with assisted electrical field
377
Preparation and characterization of ZnO nanospindles and ZnO@ZnS core–shell microspindles
378
Preparation and characterization of ZnO nanowires
379
Preparation and characterization of ZnO particles embedded in organic–inorganic planar waveguide by sol–gel route
380
Preparation and Characterization of ZnO Thin Layers with Various Percentages of Gallium Impurities
381
Preparation and characterization of ZnO/polyethersulfone (PES) hybrid membranes Original Research Article
382
Preparation and characterization of ZnO/TiO2, SO42−/ZnO/TiO2 photocatalyst and their photocatalysis
383
Preparation and characterization of ZnO-deposited DBD plasma-treated PP packaging film with antibacterial activities
384
Preparation and characterization of ZnO–SiO2 thin films as highly efficient photocatalyst
385
Preparation and characterization of ZnO–TiO2 films obtained by sol-gel method
386
Preparation and characterization of ZnO–TiO2 nanocomposite for photocatalytic disinfection of bacteria and detoxification of cyanide under visible light
387
Preparation and characterization of ZnS based nano-crystalline particles for polymer light-emitting diodes
388
Preparation and characterization of ZnS/CdS bi-layer for CdTe solar cell application Original Research Article
389
Preparation and characterization of ZnS/poly(acrylamide-co-acrylic acid) dendritical nanocomposites by γ-irradiation
390
Preparation and characterization of ZnS:Fe/MX (M = Cd, Zn; X = S, Se) core–shell nanocrystals
391
Preparation and characterization of Zn–Se bilayer thin film structure
392
Preparation and characterization of ZnTe thin films by SILAR method
393
Preparation and characterization of Zr doped TiO2 nanotube arrays on the titanium sheet and their enhanced photocatalytic activity
394
Preparation and characterization of ZrB2/AlN multilayers by N+ beam assisted deposition
395
Preparation and characterization of ZrB2–SiC–Zr2Al4C5 composites by spark plasma sintering-reactive synthesis (SPS-RS) method
396
Preparation and characterization of ZrO2 porous nanosolid and its composite fluorescent materials
397
Preparation and characterization of ZrO2 thin film on sulfonated self-assembled monolayer of 3-mercaptopropyl trimethoxysilane
398
Preparation and characterization of ZrO2/PES hybrid ultrafiltration membrane with uniform ZrO2 nanoparticles Original Research Article
399
Preparation and characterization of ZrO2/Ti electrode for waste water purification system
400
Preparation and characterization of ZrO2:Sm amorphous thin films by solid state photochemical deposition method Original Research Article
401
Preparation and characterization of ZrO2–SiO2 binary films for planar optical waveguides
402
Preparation and characterization of ZrWMoO8 powders with different morphologies using hydrothermal method
403
Preparation and characterization of Z-shaped carbon nanotubes via decomposing magnesium acetate
404
Preparation and characterization of ZTA bioceramics with and without gradient in composition
405
Preparation and characterization of α-chitin from cicada sloughs
406
Preparation and characterization of α-chitin whisker-reinforced chitosan nanocomposite films with or without heat treatment
407
Preparation and characterization of α-chitin whisker-reinforced poly(vinyl alcohol) nanocomposite films with or without heat treatment
408
Preparation and characterization of α-cyclodextrin-containing membranes—application to the selective extraction of xylene isomers
409
Preparation and characterization of α-Fe nanowires located inside double wall carbon nanotubes
410
Preparation and characterization of α-Fe2O3–CeO2 composite
411
Preparation and characterization of α-FeOOH and α-Fe2O3 by sol–gel method
412
Preparation and characterization of α-galactosidase-loaded chitosan nanoparticles for use in foods
413
Preparation and Characterization of α-Tocopherol-Loaded Nano-Lipid Carriers: Effect of Lipid Type and Carrier Oil Content
414
Preparation and characterization of β-tricalcium phosphate co-doped with monovalent and divalent antibacterial metal ions
415
Preparation and Characterization of γ-Al2O3/Al Composite
416
Preparation and characterization of ω-functionalized polystyrene–magnetite nanocomposites
417
Preparation and characterization of low-dimensional nanostructures
418
Preparation and characterization of polymer/inorganic nanoparticle composites through electron irradiation
419
Preparation and characterization on mechanical and antibacterial properties of chitsoan/cellulose blends
420
Preparation and Characterization on Nano-Sized Barium Titanate Powder Doped with Lanthanum by Sol-Gel Process
421
Preparation and Characterization some New of Naproxen Drug Derivatives
422
Preparation and characterization superporous hydroxypropyl methylcellulose gel beads
423
Preparation and characterization superporous hydroxypropyl methylcellulose gel beads
424
Preparation and Characterization Upconversion Luminescence Material of Yttrium Aluminate Doped with Rare Earth
425
Preparation and characterization water-soluble inclusion complexes of imidacloprid-β-cyclodextrin polymer and their electrochemical behavior
426
Preparation and characterizations of a new PS/TiO2 hybrid membranes by sol–gel process
427
Preparation and characterizations of a novel deoxycholic acid–O-carboxymethylated chitosan–folic acid conjugates and self-aggregates
428
Preparation and characterizations of amorphous nanostructured SiC thin films by low energy pulsed laser deposition
429
Preparation and characterizations of asymmetric sulfonated polysulfone membranes by wet phase inversion method
430
Preparation and characterizations of Ce-Cu-O monolithic catalysts for ethyl acetate catalytic combustion
431
Preparation and characterizations of charged poly(vinyl butyral) hollow fiber ultrafiltration membranes with perfluorosulfonic acid as additive
432
Preparation and Characterizations of Chitosan/Citral Nanoemulsions and their Antimicrobial Activity
433
Preparation and characterizations of Cu2O/reduced graphene oxide nanocomposites with high photo-catalytic performances
434
Preparation and characterizations of CuO doped ZnO nanostructure for the photocatalytic degradation of 4chlorophenol under visible light
435
Preparation and characterizations of HDPE–EVA alloy/OMT nanocomposites/paraffin compounds as a shape stabilized phase change thermal energy storage material
436
Preparation and characterizations of highly transparent UV-curable ZnO-acrylic nanocomposites
437
Preparation and characterizations of nanoparticles from graphite via an electrochemically oxidizing method
438
Preparation and characterizations of novel zwitterionic membranes
439
Preparation and characterizations of Pickering emulsions stabilized by hydrophobic starch particles
440
Preparation and Characterizations of Poly(amic acid) Grafted Silica Nanoparticles.
441
Preparation and characterizations of poly(vinylidene fluoride)/oxidized multi-wall carbon nanotube membranes with bi-continuous structure by thermally induced phase separation method
442
Preparation and characterizations of solid/aqueous phases inclusion complex of 2,4-dinitroaniline with β-cyclodextrin
443
Preparation and characterizations of tetragonal barium titanate powders by hydrothermal method
444
Preparation and characterizations of ultrafine hexaganoal ferrite Co2Z powders
445
Preparation and characterizations of Zn2SiO4:Mn green phosphors
446
Preparation and charateristics of Nafion membrane coated with a PVdF copolymer/recast Nafion blend for direct methanol fuel cell
447
Preparation and Charaterizations of Zeolite - Filled Natural Rubber/Poly (vinyl alcohol) Semi-IPN Membranes
448
Preparation and Charge-Discharge Properties of a Novel Organosulfur Polymer, Poly(p-phenylene thiuret), for Battery Applications
449
Preparation and chemical properties of the skutterudites (Ce–Yb)yFe4−x(Co/Ni)xSb12
450
Preparation and chemical reduction of Pt(IV) chloride-GICS: Supported Pt vs Pt inclusion graphite compounds Original Research Article
451
Preparation and chemical stability of CaO–P2O5–Na2O–B2O3 porous glass ceramics
452
Preparation and chemical transformation of surfactant-templated hybrid phase containing [MoS4]2− anions
453
Preparation and chemiluminescent properties of perylene-containing polyimides as polymeric red fluorophores
454
Preparation and chemiresistive properties of nanostructured materials
455
Preparation and chiral activation of cinchonidine modified Pt nanoclusters deposited on an alumina support: Influence of catalyst nature on obtained enantiomeric excess in ethyl pyruvate hydrogenation at low pressures Original Research Article
456
Preparation and chiral recognition of a novel chiral stationary phase for high-performance liquid chromatography, based on mono(6A-N-allylamino-6A-deoxy)-perfunctionalized β-cyclodextrin and covalently bonded silica gel
457
Preparation and chromatographic evaluation of a cysteine-bonded zwitterionic hydrophilic interaction liquid chromatography stationary phase
458
Preparation and chromatographic evaluation of a novel phosphate ester-bonded stationary phase with complexation and hydrophobic interactions retention mechanism
459
Preparation and Chromatographic Evaluation of Columns for Reversed-Phase Liquid Chromatography
460
Preparation and CO conversion activity of ceria nanotubes by carbon nanotubes templating method
461
Preparation and coagulation performance of poly-ferric-aluminum-silicate-sulfate from fly ash
462
Preparation and colloidal behaviour of surface-modified EuF3
463
Preparation and colossal magnetoresistance in a trilayer La0.67Sr0.33MnO3/La0.75MnO3/La0.67Sr0.33MnO3 device by dc magnetron sputtering
464
Preparation and combustion behaviour of polymer/layered silicate nanocomposites based upon PE and EVA
465
Preparation and combustion properties of α-Fe2O3 coated Zr particles
466
Preparation and comparative characterization of keratin–chitosan and keratin–gelatin composite scaffolds for tissue engineering applications
467
PREPARATION AND COMPARATIVE EVALUATION OF DIFFERENT ADJUVANTED TOXOID VACCINES AGAINST ENTEROTOXAEMIA
468
Preparation and comparative evaluation of sustained release metoclopramide hydrochloride matrix tablets
469
Preparation and comparative evaluation of sustained release metoclopramide hydrochloride matrix tablets
470
Preparation and comparative testing of advanced diamond-like carbon foils for tandem accelerators and time-of-flight spectrometers
471
Preparation and comparative testing of advanced diamond-like carbon foils for tandem accelerators and time-of-flight spectrometers
472
Preparation and comparison of chitosan nanoparticles with different degrees of glutathione thiolation
473
Preparation and Comparison of Two Different Nanocomposite Kinds Based on MgZnAl-Layered Double Hydroxide for Simultaneous Removal of Cationic and Anionic Dyes
474
Preparation and comparison of various formulations of solid lipid nanoparticles (SLNs) containing essential oil of Zataria multiflora
475
Preparation and complexation ability of zwitterionic derivatives of cyclodextrins
476
Preparation and compressive strength of calcium phosphate based cement dispersed with polycrystalline ceria doped tetragonal zirconia
477
Preparation and compressive strength of calcium phosphate based cement dispersed with polycrystalline ceria doped tetragonal zirconia
478
Preparation and compressive strength of α-tricalcium phosphate based cement dispersed with ceramic particles
479
Preparation and condensation reactions of a new light-fluorous Mukaiyama reagent: reliable purification with fluorous solid phase extraction for esters and amides
480
Preparation and conductibility of silica gels composited with undecatungstochromoferrous heteropoly acid
481
Preparation and conductibility of solid high-proton conductor molybdovanadogermanic heteropoly acid
482
Preparation and conducting performance of LaNiO3/Ag film and its interface reaction
483
Preparation and conductivity of decatungstomolybdovanadogermanic acid polyethylene glycol (PEG) hybrid material
484
Preparation and conductivity of PEDOT encapsulated inside faujasites
485
Preparation and conductivity of polyvinyl alcohol (PVA) films composited with molybdotungstovanadogermanic heteropoly acid
486
Preparation and conductivity of PVA films composited with decatungstomolybdovanadogermanic heteropoly acid
487
Preparation and conductivity of solid high-proton conductor silica gels containing 12-tungstogermanic heteropoly acid
488
Preparation and conductivity of solid high-proton conductor silica gels containing 12-tungstogermanic heteropoly acid
489
Preparation and conductivity of ternary scandia-stabilised zirconia
490
Preparation and conductivity of ternary undecatungstoferroaluminic heteropoly acid
491
Preparation and conductivity of the composite polymer electrolytes based on poly[bis(methoxyethoxyethoxy)phosphazene], LiClO4 and α-Al2O3
492
Preparation and conductivity of vanadotungstogermanic heteropoly acid
493
Preparation and conductivity of Yb2O3–Y2O3 and Gd2O3–Y2O3 co-doped zirconia ceramics
494
Preparation and conformational analysis of C-glycosyl β2- and β/β2-peptides Original Research Article
495
Preparation and conformational study of CF3-containing enkephalin-derived oligopeptide
496
Preparation and construction smart material sensitive to physical stress
497
Preparation and control of functional nano-objects: Spheres, rods and rings based on hybrid materials
498
Preparation and conversion of chiral O-isopropylidene-protected 4-aminocyclohexenol to various key intermediates toward narcissus alkaloids
499
Preparation and copolymerization of a novel carbohydrate containing monomer
500
Preparation and corrosion assessment of electrodeposited Ni–SiC composite thin films
501
Preparation and corrosion behavior evaluation of amalgam/titania nano composite
502
Preparation and corrosion behavior of nanocrystalline iron gradient materials produced by powder processing
503
Preparation and corrosion behavior of Ni and Ni–graphene composite coatings
504
Preparation and corrosion behaviour of amorphous Ni-based alloy coatings
505
Preparation and corrosion resistance of cerium conversion coatings on AZ91D magnesium alloy by a cathodic electrochemical treatment
506
Preparation and corrosion resistance of electroless Ni-P/SiC functionally gradient coatings on AZ91D magnesium alloy
507
Preparation and corrosion resistance of MAO layer/Yb2SiO5 composite coating on Mg alloy
508
Preparation and corrosion resistance of MAO/Ni–P composite coat on Mg alloy
509
Preparation and crystal and molecular structure of 6-O-[(2S)-2,3-epoxypropyl]-1, 2:3,4-di-O-isopropylidene-α-d-galactopyranose. Pyranoid ring conformation in 1,2:3,4-di-O-isopropylidene galactopyranose and related systems
510
Preparation and crystal structure determination of adducts of copper(II) chloride with 3-aryl-1-(imino-pyridin-2-yl-methyl)-5-hydroxy-5-trifluoromethyl-4,5-dihydro-1H-pyrazoles
511
Preparation and Crystal Structure Determination of Zinc (II) Bromide Complexes at the Presence of Various Ligands
512
Preparation and crystal structure of a new bismuth chromate: Bi8(CrO4)O11
513
Preparation and crystal structure of a new bismuth vanadate, Bi3.33(VO4)2O2
514
Preparation and crystal structure of a new cesium iron niobium oxide: Cs3Fe0.44Nb5.56O16
515
Preparation and crystal structure of a new family of transition metal phospho-silicides
516
Preparation and Crystal Structure of a New Reduced Calcium Niobium Oxide: CaNb2O4
517
Preparation and crystal structure of a new tin titanate containing Sn2+; Sn2TiO4
518
Preparation and crystal structure of chromium silicon selenide containing a B12 icosahedron with a tunnel structure
519
Preparation and crystal structure of H-BaTa2O6-type K1.83Ba4.17Nb12.18O36 and dielectric properties of the related compounds
520
Preparation and crystal structure of layered niobium oxides: Rb(Mg0.34Nb1.66)O5 and K(Fe0.43Nb1.57)O5
521
Preparation and Crystal Structure of N,N΄-bis(2,4- dimethoxybenzylidene)-butane-1,4-diamine Monohydrate
522
Preparation and crystal structure of new potassium niobium oxides: K2M2Nb4O13 (M = Mg,Fe)
523
Preparation and crystal structure of quaternary chromium sulfide halide CrSBr0.67Cl0.331
524
Preparation and Crystal Structure of Re3O10
525
Preparation and crystal structure of Sr5TiNb4O17
526
Preparation and Crystal Structure of the Equiatomic Rare Earth Palladium Silicides NdPdSi, SmPdSi,ALPHA-GdPdSi, andALPHA-TbPdSi
527
Preparation and Crystal Structure of the Intermetallics La4Mo7Al51and La4W7Al51
528
Preparation and Crystal Structure of the Pseudo-Decagonal Approximant Mn3Ga5
529
Preparation and crystal structure of two novel cadmium (II)–trimesates, Cd(HTMA)(NC5H5)2 · 0.5CH3OH · 0.5DMF and Cd(HTMA) · 2H2O
530
Preparation and Crystal Structures of 4-(4-Pyridylthio)-1-methylpyridinium Salts: Assembly of a Donor–AcceptorType Molecule Containing a Sulfide Bridge
531
Preparation and Crystal Structures of a Series of Titanium(III) 9-BBN Hydroborate Complexes Containing Ti···H Agostic Interactions
532
Preparation and crystal structures of an ionic triple-hydrogen-bridged derivative of 9-BBN hydroborate zirconium(IV)
533
Preparation and Crystal Structures of Mg(NH3)2Cl2, Mg(NH3)2Br2, and Mg(NH3)2I2
534
Preparation and crystal structures of new schiff bases derived from 3, 3ʹ-dihydroxy-4, 4ʹ-(propane-1, 2-dieloxy)-dibenzaldehyde
535
Preparation and Crystal Structures of Ni(NH3)2Cl2 and of Two Modifications of Ni(NH3)2Br2 and Ni(NH3)2I2
536
Preparation and crystal structures of novel bis(maleodintriledithiolato) platinum(III) complexes
537
Preparation and crystal structures of the complexes (η5-C5H3TMS–CMe2–η5-C13H8)MCl2 and [3,6-ditButC13H6–SiMe2–NtBu]MCl2 (M=Hf, Zr or Ti): mechanistic aspects of the catalytic formation of a isotactic–syndiotactic stereoblock-type polypropylene
538
Preparation and crystal structures of trans-bis(imidato)bis(1,2-diphenylethylamine)copper(II) complexes (imidato=5,5-diphenylhydantoinato and succinimidato). Particular boundary cases of coordination geometry and monodentate ligand conformation.
539
Preparation and crystalline morphology of biodegradable starch/clay nanocomposites
540
Preparation and crystallization behavior of syndiotactic polystyrene–clay nanocomposites
541
Preparation and crystallization behaviour of PP/PP-g-MAH/Org-MMT nanocomposite
542
Preparation and crystallization of forsterite fibrous gels
543
Preparation and crystallization of glasses in the system tetrasilicic mica-fluorapatite-diopside
544
Preparation and crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 bulk metallic glass with wide supercooled liquid region
545
Preparation and crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 bulk metallic glass with wide supercooled liquid region
546
Preparation and crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 bulk metallic glass with wide supercooled liquid region
547
Preparation and crystallographic characterization of C60Cl24
548
Preparation and crystallographic properties of Sr7−x(Ca/Ba)xMn4O15
549
Preparation and cupric ion release behavior of Cu/LDPE porous composites with tunable pore morphology for intrauterine devices
550
Preparation and Curing Kinetics Investigation of Diglycidyl Ether of Bisphenol A/Liquid Crystalline Epoxy Resin Blends
551
Preparation and cyclic oxidation of gradient NiCrAlYRe coatings on Ni-based superalloys
552
Preparation and cyclic voltammetric dissolution of core–shell–shell Ag–Pt–Ag nanocubes and their comparison in oxygen reduction reaction in alkaline media
553
Preparation and Cycloaddition Reactions of Novel Heterocyclic Mesomeric Betaines
554
Preparation and cytocompatibility of Si-incorporated nanostructured TiO2 coating
555
Preparation and cytotoxic activity of poly(ethylene glycol)-modified poly(amidoamine) dendrimers bearing adriamycin
556
Preparation and Cytotoxic Evaluation of Magnetite (Fe3O4) Nanoparticles on Breast Cancer Cells and its Combinatory Effects with Doxorubicin used in Hyperthermia
557
Preparation and Cytotoxic Evaluation of PGV-1 Derivative, CCA-1.1, as a New Curcumin Analog with Improved-Physicochemical and Pharmacological Properties
558
Preparation and damping properties of fly ash filled epoxy composites
559
Preparation and decarboxylative rearrangement of (Z)-enyne esters
560
Preparation and degradation of highly conducting polyaniline doped with picric acid
561
Preparation and dehumidification performance of composite membrane with PVA/gelatin–silica hybrid skin layer
562
Preparation and dehydrogenation properties of two cobalt-based ammine borohydrides: CoCl3·3NH3/3LiBH4 and CoCl2·3NH3/2LiBH4
563
Preparation and Deposition the Spinel Ferrite (Cu-ZnFe2O4) On Al Substrates and Plasticizer Through TP to Study of The Magnetic Characters
564
Preparation and deprotection of 1,1-diacetates (acylals) using zirconium sulfophenyl phosphonate as catalyst
565
Preparation and desalination performance of multiwall carbon nanotubes
566
PREPARATION AND DESIGN OF E-CONTENT, RELYING ON THE LANGUAGE (TO SERVE PEOPLE WITH SPECIAL NEEDS)
567
Preparation and Designing a Checklist for Health Care Marketing Mix, with Medical Tourism Approach
568
Preparation and detailed NMR analyses of a series of oligo-α-carrageenans
569
Preparation and Determination of Drug-Polymer Interaction and In-vitro Release of Mefenamic Acid Microspheres Made of CelluloseAcetate Phthalate and/or Ethylcellulose Polymers
570
Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan
571
Preparation and Diagnosis of Activated Carbon from Hydrothermally Carbonized Sucrose as an Adsorption for the Removal Methyl Red Dye from Aqueous Synthetic Solutions
572
Preparation and Diagnosis of Pyrimidines Derivatives by Conventional And Microwave Ways.
573
Preparation and diastereo- and enantioselective trifluorocrotylboration with (Z)-(B)-diisopinocampheyl(4,4,4-trifluorobut-2-en-1-yl)borane
574
Preparation and diastereomeric separation of an (S)- and (R)-1-(methoxycarbonyl)tridec-10-yl glucoside derivative, a precursor for a monosaccharide constituent of resin glycosides
575
Preparation and dielectric behaviors of thermoplastic and thermosetting polymer nanocomposite films containing BaTiO3 nanoparticles with different diameters
576
Preparation and dielectric properties by sol–gel derived PMN-PT powder and ceramic
577
Preparation and dielectric properties of (Sr1−xCax)Fe0.5Nb0.5O3; (x=0.0, 0.1, 0.2) ceramics
578
Preparation and dielectric properties of Ag1−xLixNbO3 (ALN) solid solutions ceramics
579
Preparation and dielectric properties of B2O3–Li2O-doped BaZr0.35Ti0.65O3 ceramics sintered at a low temperature
580
Preparation and dielectric properties of BaCu(B2O5)-doped SrTiO3-based ceramics for energy storage
581
Preparation and dielectric properties of barium iron niobate by molten-salt synthesis
582
Preparation and dielectric properties of barium strontium titanate glass-ceramics sintered from sol–gel-derived powders
583
Preparation and dielectric properties of B-doped SiC powders by combustion synthesis
584
Preparation and dielectric properties of bismuth-based dielectric/PTFE microwave composites
585
Preparation and dielectric properties of BST-Mg2TiO4 composite ceramics
586
Preparation and dielectric properties of cadmium substituted lithium ferrite using microwave-induced combustion
587
Preparation and dielectric properties of ceramics in the SrBi2(Ta1−xNbx)2O9 solid solution system
588
Preparation and dielectric properties of core–shell structural composites of poly(1H,1H,2H,2H-perfluorooctyl methacrylate)@BaTiO3 nanoparticles
589
Preparation and dielectric properties of dense and amorphous alumina film by sol–gel technology
590
Preparation and dielectric properties of Dy, Er-doped BaZr0.2Ti0.8O3 ceramics
591
Preparation and dielectric properties of polymer-derived SiCTi ceramics
592
Preparation and dielectric properties of semiconducting lanthanum-doped strontium titanate ceramics from titanyl citrate precursors
593
Preparation and dielectric properties of SiC nanowires self-sacrificially templated by carbonated bacterial cellulose
594
Preparation and dielectric properties of Sr(Ti0.95Zr0.05)O3 ceramics doped with CaOTiO2SiO2 (CTS)
595
Preparation and dielectric properties of Sr5LnSn3Nb7O30 (Ln = Nd, La) ceramics
596
Preparation and dielectric property of Ag–PVA nano-composite
597
Preparation and dielectric tunability of bismuth-based pyrochlore dielectric thick films on alumina substrates
598
Preparation and Diels–Alder reaction of carbosilane dendrimer with conjugated diene
599
Preparation and Diels-Alder reactions of new nickel phthalocyanines
600
Preparation and dispersion behavior of silylated graphite oxide intercalated by n-hexadecylamine
601
Preparation and dispersion of shelled carbon nanoshells
602
Preparation and dispersion properties of water-soluble polyethylene glycol-dimethyl 5-sulfoisophthalate sodium salt polyester surfactants
603
Preparation and dispersive behaviors of reduced charge smectite
604
Preparation and dispersive mechanism of highly dispersive ultrafine silver powder
605
Preparation and Double-Helix Icosahedra Structure of delta-Co2Zn15
606
Preparation and drug controlled-release of polyion complex micelles as drug delivery systems
607
Preparation and drug release behavior of temperature-responsive mesoporous carbons
608
Preparation and drug release behaviors of nimodipine-loaded poly(caprolactone)–poly(ethylene oxide)–polylactide amphiphilic copolymer nanoparticles
609
Preparation and drug release property of CO2 stimulus-sensitive poly(N, N-dimethylaminoethyl methacrylate)-b-polystyrene nanoparticles
610
Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1
611
PREPARATION AND DSC OF PHASE STABILIZED AMMONIUM NITRATE CRYSTALLIZED FROM ITS AQUEOUS SOLUTION CONTAINING POTASSIUM FLUORIDE
612
Preparation and dynamic deuterium gas loading of highly porous palladium bulks
613
Preparation and Easy-Cleaning Property of Rare Earth Composite Ceramic
614
Preparation and effects of Mg-doping on the electrochemical properties of spinel Li4Ti5O12 as anode material for lithium ion battery
615
Preparation and electrical behavior study of the ceramic interconnect La0.7Ca0.3CrO3−δ with CeO2-based electrolyte Ce0.8Sm0.2O1.9
616
Preparation and electrical characterisation of dodecanethiol monolayer protected silver nanoclusters
617
Preparation and electrical characterization of a silicone elastomer composite charged with multi-wall carbon nanotubes functionalized with 7-octenyltrichlorosilane
618
Preparation and electrical conductivities of oligothiophene radical-cation salts
619
Preparation and electrical conductivity of graphene/ultrahigh molecular weight polyethylene composites with a segregated structure Original Research Article
620
Preparation and electrical conductivity of novel vanadate borate glass system containing graphene oxide
621
Preparation and electrical properties of (1 − x)Ba(Fe0.5Nb0.5)O3–xBaTiO3 ceramics
622
Preparation and electrical properties of a pyrochlore-related Ce2Zr2O8−x phase
623
Preparation and electrical properties of Bi2Zn2/3Nb4/3O7 thin films deposited at room temperature for embedded capacitor applications
624
Preparation and electrical properties of bismuth layer-structured ceramic Bi3NbTiO9 solid solution
625
Preparation and electrical properties of Cr2O3 gate insulator embedded with Fe dot
626
Preparation and electrical properties of fine strontium titanate powder from titanium alkoxide in a strong alkaline solution
627
Preparation and electrical properties of fine strontium titanate powder from titanium alkoxide in a strong alkaline solution
628
Preparation and electrical properties of garnet-type Li6BaLa2Ta2O12 lithium solid electrolyte thin films prepared by pulsed laser deposition
629
Preparation and electrical properties of graphene nanosheet/Al2O3 composites Original Research Article
630
Preparation and electrical properties of highly (1 1 1) oriented antiferroelectric PLZST films by radio frequency magnetron sputtering Original Research Article
631
Preparation and Electrical Properties of Highly (111)-Oriented (Na0.5Bi0.5) TiO3 Thin Films by a Sol-Gel Process
632
Preparation and electrical properties of humidity sensing films of BaTiO3/polystrene sulfonic sodium
633
Preparation and electrical properties of La0.4Sr0.6Ni0.2Fe0.8O3 using a glycine nitrate process
634
Preparation and electrical properties of lithium–sulfur-composite polymer batteries
635
Preparation and electrical properties of multilayer ZnO varistors with water-based tape casting
636
Preparation and electrical properties of NaNbO3 ceramics synthesized by topochemical microcrystal conversion
637
Preparation and electrical properties of NASICON-type structured Li1.4Al0.4Ti1.6(PO4)3 glass-ceramics by the citric acid-assisted sol–gel method
638
Preparation and electrical properties of Ni0.6Mn2.4−xSnxO4 NTC ceramics
639
Preparation and electrical properties of semiconducting Ba3−xLaxCe3Ti5Nb5O30 (x = 0.5, 1.0 and 1.5) compounds
640
Preparation and electrical properties of sintered oxides composed of Mn1.5Co(0.25+X)Ni(1.25-X)O4 ( 05X50:75) with a cubic spinel structure
641
Preparation and electrical properties of Sm-doped Bi2Ti2O7 thin films prepared on Pt (111) substrates
642
Preparation and electrical properties of sol–gel derived (1−x)Pb(Sc1/2Nb1/2)O3−xPbTiO3 (x=0.6) thin films
643
Preparation and electrical properties of the novel TTP donors including the BETS unit
644
Preparation and electrical properties of xCaRuO3/(1 − x)CaTiO3 perovskite composites
645
Preparation and electrical properties of yttrium-doped strontium titanate with B-site deficiency
646
Preparation and electrical sensitive behavior of poly (N-vinylpyrrolidone-co-acrylic acid) hydrogel with flexible chain nature
647
Preparation and electrical–magnetic properties of polyaniline doped with ionic ferrocenesulfonic acid
648
Preparation and electroactive properties of a PVDF/nano-TiO2 composite film Review Article
649
Preparation and electroactivity of poly(methylmethacrylate-co-pyrrolylmethylstyrene)–g-polypyrrole
650
Preparation and electroactivity of polymer-functionalized graphene oxide-supported platinum nanoparticles catalysts
651
Preparation and electrocatalytic activities of platinum nanoclusters deposited on modified multi-walled carbon nanotubes supports Original Research Article
652
Preparation and electrocatalytic activity of Rh adlayers on Pt(1 0 0) electrodes: reduction of nitrous oxide
653
Preparation and electrocatalytic activity of tungsten carbide and titania nanocomposite
654
Preparation and electrocatalytic properties of osmium oxide/hexacyanoruthenate films modified electrodes for catecholamines and sulfur oxoanions
655
Preparation and electrocatalytic properties of the TBO/nafion chemically-modified electrodes
656
Preparation and electrochemical behavior of dense YSZ film for SOEC
657
Preparation and electrochemical behavior of sol–gel LiNi0.3Co0.70−xMxO2 (M = Mn, Al)
658
Preparation and electrochemical behavior of the CA/TiO2/Sb2O5 composite electrode modified with p-benzoquinone
659
Preparation and electrochemical behaviors of platinum nanocluster catalysts deposited on plasma-treated carbon nanotube supports
660
Preparation and electrochemical behaviour of dinuclear platinum complexes containing NCN ligands (NCN=[C6H3(Me2NCH2)2-2,6]−). The crystal structure of [C6H3(Me2NCH2)2-1,3-(CC)-5]2
661
Preparation and electrochemical behaviour of PPy–CdS composite films
662
Preparation and electrochemical capacitance of brown-millerite SrCoO2.5 as electrode materials for supercapacitor
663
Preparation and electrochemical capacitive performance of polyaniline nanofiber-graphene oxide hybrids by oil–water interfacial polymerization
664
Preparation and electrochemical capacitive performance of polyaniline nanofiber-graphene oxide hybrids by oil–water interfacial polymerization
665
Preparation and electrochemical characterisation of supporting SOFC–Ni–YZT anodes
666
Preparation and electrochemical characteristics of a new rechargeable Li/PAn[FeOCl(an)] cell
667
Preparation and electrochemical characteristics of a polyvinylpyrrolidone-stabilized Si/carbon composite nanofiber anode for a lithium ion battery
668
Preparation and electrochemical characteristics of electrodeposited acetaminophen on ruthenium oxide nanoparticles and its role as a sensor for simultaneous determination of ascorbic acid, dopamine and N-acetyl-l-cysteine
669
Preparation and electrochemical characteristics of LiNi1/3Mn1/3Co1/3O2 coated with metal oxides coating
670
Preparation and electrochemical characteristics of manganese dioxide/graphite nanoplatelet composites
671
Preparation and electrochemical characteristics of mesoporous carbon spheres for supercapacitors
672
Preparation and electrochemical characteristics of MgNi–FeB alloys
673
Preparation and electrochemical characteristics of N-enriched carbon foam
674
Preparation and electrochemical characteristics of quaternary Li-Mn-V-O spinel as the positive materials for rechargeable lithium batteries
675
Preparation and electrochemical characteristics of spherical spinel cathode powders via an ultrasonic spray pyrolysis process
676
Preparation and electrochemical characteristics of microemulsion-derived Li(Ni, Co)O2 nanopowders
677
Preparation and Electrochemical Characterization of a (beta)-Cyclodextrin-Based Chemically Modified Electrode
678
Preparation and Electrochemical Characterization of a (beta)-Cyclodextrin-Based Chemically Modified Electrode
679
Preparation and electrochemical characterization of a new nanosensor based on self-assembled monolayer of cysteamine functionalized with phosphate groups
680
Preparation and electrochemical characterization of cobalt-manganese oxide as electrode materials for electrochemical capacitors Original Research Article
681
Preparation and electrochemical characterization of electrospun, microporous membrane-based composite polymer electrolytes for lithium batteries
682
Preparation and electrochemical characterization of flower-like Li1.2Ni0.17Co0.17Mn0.5O2 microstructure cathode by electrospinning
683
Preparation and electrochemical characterization of lithium cobalt oxide nanoparticles by modified sol–gel method
684
Preparation and electrochemical characterization of nanocrystalline Li[Li0.12Ni0.32Mn0.56]O2 pyrolyzed from polyacrylate salts
685
Preparation and electrochemical characterization of NiO nanostructure-carbon nanowall composites grown on carbon cloth
686
Preparation and electrochemical characterization of polyaniline/multi-walled carbon nanotubes composites for supercapacitor
687
Preparation and electrochemical characterization of porous SWNT–PPy nanocomposite sheets for supercapacitor applications
688
Preparation and electrochemical characterization of spinel type Fe–Co3O4 thin film electrodes in alkaline medium
689
Preparation and electrochemical characterization of tin/graphite/silver composite as anode materials for lithium-ion batteries
690
Preparation and electrochemical characterization of Zn2SnO4 as anode materials for lithium ion batteries
691
Preparation and electrochemical characterizations of cation-exchange membranes with different functional groups
692
Preparation and electrochemical characterizations of MnO2-dispersed carbon aerogel as supercapacitor electrode material
693
Preparation and electrochemical characterizations of poly(3,4-dioxyethylenethiophene)/LiCoO2 composite cathode in lithium-ion battery
694
Preparation and electrochemical characterizations of poly(3,4-dioxyethylenethiophene)/LiCoO2–Ketjenblack composite cathode in lithium-ion battery
695
Preparation and electrochemical hydrogen storage of mesoporous carbons by degradation of polyethylene in supercritical water
696
Preparation and Electrochemical Hydrogen Storage of the Nanocrystalline LaMg12 Alloy with Ni Powders
697
Preparation and electrochemical investigation of a nano-structured material Ni2+/MgFe layered double hydroxide as a glucose biosensor
698
Preparation and electrochemical investigation of LiMn2 − xMexO4 (Me: Ni, Fe, and x = 0.5, 1) cathode materials for secondary lithium batteries
699
Preparation and electrochemical magnesium insertion behaviors of Mg0.5+y(MeyTi1−y)2(PO4)3 (Me = Cr, Fe)
700
Preparation and electrochemical performance of a CuO/graphene composite
701
Preparation and electrochemical performance of a graphene-wrapped carbon/sulphur composite cathode
702
Preparation and electrochemical performance of a graphene-wrapped carbon/sulphur composite cathode
703
Preparation and electrochemical performance of alpha-nickel hydroxide nanowire
704
Preparation and electrochemical performance of carbon foam by direct pyrolysis of cyanate ester resin
705
Preparation and electrochemical performance of carbon foam by direct pyrolysis of cyanate ester resin
706
Preparation and electrochemical performance of gel polymer electrolytes using tri(ethylene glycol) dimethacrylate
707
Preparation and electrochemical performance of highly dispersed Sn–Zn–O composite system
708
Preparation and electrochemical performance of Li4Ti5O12/graphitized carbon nanotubes composite
709
Preparation and electrochemical performance of novel ruthenium–manganese oxide electrode materials for electrochemical capacitors Original Research Article
710
Preparation and electrochemical performance of sulfur-alumina cathode material for lithium-sulfur batteries
711
Preparation and electrochemical performances of graphite oxide/polypyrrole composites
712
Preparation and electrochemical performances of PEDOT/sulfonic acid-functionalized graphene composite hydrogel
713
Preparation and electrochemical properties of a Li2CuO2–Li2NiO2 solid solution as a lithium-intercalation electrode
714
Preparation and electrochemical properties of a Sm2−xSrxNiO4 cathode for an IT-SOFC
715
Preparation and electrochemical properties of boron-doped mesoporous carbons
716
Preparation and electrochemical properties of carbon nanofibers derived from polybenzimidazole/polyimide precursor blends Original Research Article
717
Preparation and electrochemical properties of carbon-doped TiO2 nanotubes as an anode material for lithium-ion batteries
718
Preparation and electrochemical properties of cathode materials for lithium ion battery by aerosol process
719
Preparation and electrochemical properties of composite LaNix/Ni–S–Co alloy film
720
Preparation and electrochemical properties of Co–Si3N4 nanocomposites
721
Preparation and electrochemical properties of Cr(III)–Ti-based coatings on 6063 Al alloy
722
Preparation and electrochemical properties of high-voltage cathode materials, LiMyNi0.5−yMn1.5O4 (M=Fe, Cu, Al, Mg; y=0.0–0.4)
723
Preparation and electrochemical properties of Keggin-type phosphomolybdic anions in electrostaticly linked l-cysteine self-assembled monolayers
724
Preparation and electrochemical properties of La0.4Sr0.6FeO3 as negative electrode of Ni/MH batteries
725
Preparation and electrochemical properties of lamellar MnO2 for supercapacitors
726
Preparation and electrochemical properties of La–Mg–Ni-based La0.75Mg0.25Ni3.3Co0.5 multiphase hydrogen storage alloy as negative material of Ni/MH battery
727
Preparation and electrochemical properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 cathode materials for Li-ion batteries
728
Preparation and electrochemical properties of LiAlO2-coated Li(Ni1/3Mn1/3Co1/3)O2 for all-solid-state batteries
729
Preparation and electrochemical properties of LiNi1/3Co1/3Mn1/3O2–PPy composites cathode materials for lithium-ion battery
730
Preparation and electrochemical properties of Li-rich spinel-type lithium manganate coated LiMn2O4
731
Preparation and electrochemical properties of lithium–sulfur polymer batteries
732
Preparation and electrochemical properties of mesoporous Co3O4 crater-like microspheres as supercapacitor electrode materials
733
Preparation and electrochemical properties of modified electrodes with Keggin-type silicotungstates and PEDOT
734
Preparation and electrochemical properties of multiwalled carbon nanotubes–nickel oxide porous composite for supercapacitors
735
Preparation and electrochemical properties of nano-Si/C composites
736
Preparation and electrochemical properties of nickel oxide as a supercapacitor electrode material
737
Preparation and electrochemical properties of Ni–SDC thin films for IT-SOFC anode
738
Preparation and electrochemical properties of novel cyclic dinuclear acetylacetonato ruthenium complexes doubly bridged with sulfur and/or disulfur
739
Preparation and electrochemical properties of organic–inorganic hybrids with the use of alkylammonium or alkylviologen cations and polyoxometalate anions
740
Preparation and electrochemical properties of polyaniline nanofibers using ultrasonication
741
Preparation and electrochemical properties of polypyrrole/graphite oxide composites with various feed ratios of pyrrole to graphite oxide
742
Preparation and electrochemical properties of RuO2/polyaniline electrodes for supercapacitors
743
Preparation and electrochemical properties of SAM of alkanethiols functionalized with 2-aza[3]ferrocenophane on gold electrode
744
Preparation and electrochemical properties of some (Sc1-xTix)Ni alloys
745
Preparation and electrochemical properties of spinel LiFexCuyMn1.2O4 by ultrasonic spray pyrolysis
746
Preparation and electrochemical properties of Sr-doped Nd2NiO4 cathode materials for intermediate-temperature solid oxide fuel cells
747
Preparation and electrochemical properties of strontium doped Pr2NiO4 cathode materials for intermediate-temperature solid oxide fuel cells
748
Preparation and electrochemical properties of ultra-fine Mn–Ni–Cu oxides for supercapacitors
749
Preparation and electrochemical properties of vanadium pentoxide aerogel film derived at the ambient pressure
750
Preparation and electrochemical properties of Y-doped Li3V2(PO4)3 cathode materials for lithium batteries
751
Preparation and electrochemical properties of Zn-doped LiNi0.8Co0.2O2
752
Preparation and electrochemical properties of ZnO/conductive-ceramic nanocomposite as anode material for Ni/Zn rechargeable battery
753
Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries
754
Preparation and electrochemical/thermal properties of LiNi0.74Co0.26O2 cathode material
755
Preparation and electrochemiluminescent and photoluminescent properties of a graphene oxide colloid Original Research Article
756
Preparation and electrochemistry of one-dimensional nanostructured MnO2/PPy composite for electrochemical capacitor
757
Preparation and electrochemistry properties of trifunctional 1,9-dithiophenalenylium salt and its neutral radical with benzene spacer
758
Preparation and electrochromic properties of Li-doped MoO3 films fabricated by the peroxo sol–gel process
759
Preparation and electrochromic properties of spin self-assembled polyelectrolyte multilayer films composed of PEDOT:PSS and PAH
760
Preparation and electrochromic properties of tungsten oxide and iridium oxide porous films
761
Preparation and electrochromism of alkylammonium molybdate thin films
762
Preparation and electrode behavior of NdMgNi3.6Co0.4 hydrogen storage alloy
763
Preparation and electrode properties of composite cathodes based on Bi1 − xSrxFeO3 − δ with Perovskite-type structure
764
Preparation and electromagnetic properties of graphene-supported Ni0.8Zn0.2Ce0.06Fe1.94O4 nanocomposite
765
Preparation and electromagnetic properties of in-situ Ba0.8Sr0.2TiO3/YFeO3 composites
766
Preparation and electromagnetic properties of La-doped barium-ferrite/polythiophene composites
767
Preparation and electromagnetic properties of multiwalled carbon nanotubes/Ni composites by γ-irradiation technique
768
Preparation and electromagnetic properties of Polyaniline(polypyrrole)-BaFe12O19/Ni0.8Zn0.2Fe2O4 ferrite nanocomposites
769
Preparation and electromagnetic wave absorption properties of Fe-doped zinc oxide coated barium ferrite composites
770
Preparation and electromechanical properties of PZT/PGO thick films on alumina substrate
771
Preparation and electronic properties of Schottky devices utilizing an asymmetrically substituted metal-free phthalocyanine Langmuir-Blodgett film as barrier layers
772
Preparation and electronic state of graphite-like layered material BC6N
773
Preparation and electronic states of Na16Ba8Si136 clathrate
774
Preparation and electrophoretic response of poly(methyl methacrylate-co-methacrylic acid) coated TiO2 nanoparticles for electronic paper application
775
Preparation and electrophoretic response of poly(methyl methacrylate-co-methacrylic acid) coated TiO2 nanoparticles for electronic paper application
776
Preparation and electrophoretic separation of Bodipy-Fl-labeled glycosphingolipids
777
Preparation and electrorheological characteristics of uniform core/shell structural particles with different polar molecules shells
778
Preparation and electrorheological properties of polyquin(2,3-b)acridine-12,14(5,7)dione-based suspensions
779
Preparation and electrorheological properties of triethanolamine-modified TiO2
780
Preparation and Electrorheological Property of NaNO3-Doped Y2O3 Material
781
Preparation and Electrorheological Property of Y4O(OH)9(NO3)-NH4NO3 Materials
782
Preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions
783
Preparation and electrosorption desalination performance of activated carbon electrode with titania
784
Preparation and elevated temperature compressive properties of multi-walled carbon nanotube reinforced Ti composites
785
Preparation and emission property of scandia pressed cathode
786
Preparation and enantiomer separation behavior of selectively methylated β-cyclodextrin-bonded stationary phases for high performance chromatography Original Research Article
787
Preparation and enantiomer separation characteristics of chitosan/β-cyclodextrin composite membranes
788
Preparation and enantioseparation characteristics of a novel chiral stationary phase based on mono (6A-azido-6A-deoxy)-per(p-chlorophenylcarbamoylated) β-cyclodextrin
789
Preparation and encapsulation properties of double Pickering emulsions stabilized by quinoa starch granules
790
Preparation and energy-storage performance of PLZT antiferroelectric thick films via sol–gel method
791
Preparation and enhanced capacitance of core–shell polypyrrole/polyaniline composite electrode for supercapacitors
792
Preparation and Enhanced Electrochromic Property of Three-dimensional Ordered Mesostructured Mixed Tungsten–Titanium Oxides
793
Preparation and Enhanced Electrorheological Activity of TiO2 Doped with Chromium Ion
794
Preparation and enhanced photocatalytic activity of Pd–CuO/palygorskite nanocomposites
795
Preparation and enhanced photoluminescence property of ordered ZnO/TiO2 bottlebrush nanostructures
796
Preparation and enhanced stability of flexible supercapacitor prepared from Nafion/polyaniline nanofiber
797
Preparation and enhanced visible light-driven catalytic activity of ZnO microrods sensitized by porphyrin heteroaggregate
798
Preparation and Enhancement of ( Hydroxyapatite/Bioactive glass) Composite by Mg Nanowires for Dental and Bone Implants
799
Preparation and enzymatic activity of penicillin G acylase immobilized on core–shell porous glass beads
800
Preparation and enzymatic behavior of surfactant-enveloped enzymes for glycosynthesis in nonaqueous aprotic media
801
Preparation and enzymatic hydrolysis of nanoparticles made from single xyloglucan polysaccharide chain
802
Preparation and EPR Studies of Lithium Phthalocyanine Radical as an Oxymetric Probe
803
Preparation and ESR characterization of polyalkyl-s-indacenyl anion-radicals from polyalkyl-1,5-dilithio-s-indacenes
804
Preparation and ethanol sensing properties of the superstructure SnO2/ZnO composite via alcohol-assisted hydrothermal route
805
Preparation and Evaluation anticancer activity of D-glucosamine Nanoparticles on Metastatic cancer Model in vivo
806
Preparation and evaluation in vitro and in vivo of docetaxel loaded mixed micelles for oral administration
807
Preparation and evaluation of [166Ho] holmium-dimethyl diethylenetriaminepentaaceticacid (DMDTPA) as potential radiopharmaceutical for endovascular radiation therapy (EVRT)
808
Preparation and evaluation of 1,3-alternate 25,27-bis-(pentafluorobenzyloxy)-26,28-bis-(3-propyloxy)-calix[4]arene-bonded silica gel high performance liquid chromatography stationary phase
809
Preparation and evaluation of 1,3-diaminocyclopentane-linked dihydropyrimidinone derivatives as selective α1a-receptor antagonists
810
Preparation and evaluation of 1,6-hexanediol ethoxylate diacrylate-based alkyl methacrylate monolithic capillary column for separating small molecules
811
PREPARATION AND EVALUATION OF 5, 9-DIMETHYL-2-CYCLOPROPYL-2-DECANOL AS A PENETRATION ENHANCER FOR DRUGS THROUGH RAT SKIN
812
Preparation and evaluation of 67Ga-DOTA-Bombesin (7-14) as a tumor scintigraphic agent
813
Preparation and evaluation of 99mTc-DMSA lyophilized kit for renal imaging
814
Preparation and evaluation of a chiral stationary phase covalently bound with a chiral pseudo-18-crown-6 ether having a phenolic hydroxy group for enantiomer separation of amino compounds
815
Preparation and evaluation of a chiral stationary phase covalently bound with chiral pseudo-18-crown-6 ether having 1-phenyl-1,2-cyclohexanediol as a chiral unit
816
Preparation and Evaluation of a Herbal Mouthwash Containing Oak Husk of Quercus brantii and Zataria multiflora
817
Preparation and evaluation of a hydrolytically stable amide-embedded stationary phase
818
Preparation and evaluation of a kind of bacterial cellulose dry films with antibacterial properties
819
Preparation and evaluation of a large-volume radial flow monolithic column
820
Preparation and Evaluation of a Liposome Drug Delivery System in Cancer Treatment in vitro
821
Preparation and evaluation of a liquid sustained-release drug delivery system for theophylline using spray-drying technique
822
Preparation and evaluation of a liquid sustained-release drug delivery system for theophylline using spray-drying technique
823
Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography
824
Preparation and evaluation of a magnetite-doped activated carbon fiber for enhanced arsenic removal Original Research Article
825
Preparation and evaluation of a mastic gum Peel-off mask as a skin-refreshing product
826
Preparation and evaluation of a metallic foam catalyst for steam-CO2 reforming of methane in GTL-FPSO process
827
Preparation and evaluation of a molecularly imprinted sol–gel material for on-line solid-phase extraction coupled with high performance liquid chromatography for the determination of trace pentachlorophenol in water samples
828
Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography
829
Preparation and evaluation of a multi-component catalyst by using a co-sputtering system for anodic oxidation of ethanol
830
Preparation and evaluation of a neutral methacrylate-based monolithic column for hydrophilic interaction stationary phase by pressurized capillary electrochromatography
831
Preparation and evaluation of a new radiopharmaceutical for radiosynovectomy, 111Ag-labelled hydroxyapatite (HA) particles
832
Preparation and evaluation of a novel Fe–Mn binary oxide adsorbent for effective arsenite removal
833
Preparation and evaluation of a novel glass-ionomer cement with antibacterial functions
834
Preparation and Evaluation of A Novel Liposomal Nano-Formulation in Metastatic Cancer Treatment Studies
835
Preparation and evaluation of a novel monolithic column containing double octadecyl chains for reverse-phase micro high performance liquid chromatography
836
Preparation and evaluation of a novel self-humidifying Pt/PFSA composite membrane for PEM fuel cell
837
Preparation and evaluation of a novel star-shaped polyacid-constructed dental glass–ionomer system
838
Preparation and evaluation of a poly(N-vinylcarbazole)–Fe3O4 (PNVC–Fe3O4) nanocomposite
839
Preparation and evaluation of a polycaprolactone/chitosan/propolis fibrous nanocomposite scaffold as a tissue engineering skin substitute
840
Preparation and evaluation of a polymer-supported Mukaiyama reagent
841
Preparation and evaluation of a porous monolithic capillary column for microextraction of estrogens from urine and milk samples online coupled to high-performance liquid chromatography
842
Preparation and evaluation of a proton exchange membrane based on crosslinkable sulfonated poly(ether ether ketone)s
843
Preparation and evaluation of a proton exchange membrane based on oxidation and water stable sulfonated polyimides
844
Preparation and evaluation of a silica-based 1-alkyl-3-(propyl-3-sulfonate) imidazolium zwitterionic stationary phase for high-performance liquid chromatography
845
Preparation and evaluation of a thermosensitive liposomal hydrogel for sustained delivery of danofloxacin using mesoporous silica nanoparticles
846
Preparation and Evaluation of Aceclofenac Topical Microemulsion
847
Preparation and evaluation of activated carbon with different polycondensed phosphorus oxyacids (H3PO4, H4P2O7, H6P4O13 and C6H18O24P6) activation employing mushroom roots as precursor
848
Preparation and evaluation of activated carbon with different polycondensed phosphorus oxyacids (H3PO4, H4P2O7, H6P4O13 and C6H18O24P6) activation employing mushroom roots as precursor
849
Preparation and Evaluation of Acyclovir Liposomes by Two Techniques: A Comparative Study
850
Preparation and evaluation of aerosol composite particles by electrostatic process
851
Preparation and evaluation of Al2O3 plastic forming feedstock with partially water soluble polymer as a binder
852
Preparation and evaluation of an animal feed byproduct produced by solid-state fermentation of apple pomace
853
Preparation and evaluation of an imidazole-coated capillary column for the electrophoretic separation of aromatic acids
854
Preparation and evaluation of an immunoaffinity sorbent for the analysis of opioid peptides by on-line immunoaffinity solid-phase extraction capillary electrophoresis–mass spectrometry Original Research Article
855
Preparation and evaluation of an immunoaffinity sorbent with Fab′ antibody fragments for the analysis of opioid peptides by on-line immunoaffinity solid-phase extraction capillary electrophoresis–mass spectrometry Original Research Article
856
Preparation and evaluation of anion exchange open tubular column
857
Preparation and evaluation of bipyridyl-tagged reagents and scavengers
858
Preparation and Evaluation of Blood Compatibility of Novel Epoxy-Modified Polyurethanes
859
Preparation and evaluation of brownies soft biscuit from non-wheat flour using date molasses
860
Preparation and evaluation of C10-cationic latex particle coated open-tubular column for capillary electrochromatography
861
Preparation and evaluation of Ca3−xBixCo4O9−δ (0< x ≤ 0.5) as novel cathodes for intermediate temperature-solid oxide fuel cells
862
Preparation and evaluation of calix[4]arene-capped β-cyclodextrin-bonded silica particles as chiral stationary phase for high-performance liquid chromatography
863
Preparation and Evaluation of Carbamazepine Particles Loaded in Mucoadhesive Film for Treatment of Trigeminal Neuralgia
864
Preparation and evaluation of carbon coated alumina as a high surface area packing material for high performance liquid chromatography
865
PREPARATION AND EVALUATION OF CELECOXIB TRANSDERMAL PATCHES
866
Preparation and Evaluation of Ceramic Materials in Wastewater Treatment
867
Preparation and evaluation of chitosan nanoparticles containing Diphtheria toxoid as new carriers for nasal vaccine delivery in mice.
868
Preparation and evaluation of chitosan nanoparticles containing Diphtheria toxoid as new carriers for nasal vaccine delivery in mice.
869
Preparation and Evaluation of Chitosan-Alginate Microparticles for Luteolin Entrapment
870
Preparation and evaluation of chitosan–hydrophobic silica composite microspheres: Role of hydrophobic silica in modifying their properties
871
Preparation and evaluation of cholesteryl PAMAM dendrimers as nano delivery agents for antisense oligonucleotides
872
Preparation and evaluation of clove oil in emu oil self-emulsion for hair conditioning and hair loss prevention
873
Preparation and evaluation of Co/Al2O3 catalysts in the production of hydrogen from thermo-catalytic decomposition of methane: Influence of operating conditions on catalyst performance
874
Preparation and evaluation of composites from montmorillonite and some heterocyclic polymers: 3. a water dispersible nanocomposite from pyrrole-montmorillonite polymerization system
875
Preparation and evaluation of controlled released implant containing mesoporous selenium nanoparticles loaded with curcumin in rats with spinal cord injury
876
Preparation and evaluation of copolymeric micelles with high paclitaxel contents and sustained drug release
877
Preparation and Evaluation of Cucumeropsis mannii Naud. Seed Oil Metallic Soaps as Driers in Gloss Paint
878
Preparation and Evaluation of Curcumin Nano Emulsion to Inhibit TC-1 Cell Growth
879
Preparation and Evaluation of Cyproterone Acetate Liposome for Topical Drug Delivery
880
PREPARATION AND EVALUATION OF DICLOFENAC SODIUM– CELLULOSE ACETATE MICROCAPSULES USING SOLVENT EVAPORATION TECHNIQUE
881
Preparation and Evaluation of Diphtheria Toxoid-Containing Microspheres
882
Preparation and Evaluation of Diphtheria Toxoid-Containing Microspheres
883
Preparation and evaluation of doped ceria interlayer on supported stabilized zirconia electrolyte SOFCs by wet ceramic processes
884
Preparation and evaluation of electrodeposited platinum nanoparticles on in situ carbon nanotubes grown carbon paper for proton exchange membrane fuel cells
885
Preparation and evaluation of electrospun nanofibers containing pectin and time-dependent polymers aimed for colonic drug delivery of celecoxib
886
Preparation and Evaluation of Epoxy-Clay Nanocomposite Coatings for Corrosion Protection
887
Preparation and Evaluation of Etodolac Nanoemulsion
888
Preparation and Evaluation of Eudragit® L100 Nanoparticles Loaded Impregnated with KT Tromethamine Loaded PVA -HEC Insertions for Ophthalmic Drug Delivery
889
Preparation and evaluation of flat membranes for phenols separation Original Research Article
890
Preparation and Evaluation of Fluorescein Isothiocyanate-Conjugated Immunoglobulins for the detection of Avian Encephalomyelitis Virus
891
Preparation and Evaluation of Fluorescein Isothiocyanate-Conjugated Polyclonal Antibodies for Rapid Detection of Duck Viral Enteritis (Duck Plague)
892
Preparation and Evaluation of Glibenclamide-Loaded Biodegradable Nanoparticles
893
Preparation and evaluation of graphene-coated solid-phase microextraction fiber Original Research Article
894
Preparation and evaluation of heparin-immobilized poly (lactic acid) (PLA) membrane for hemodialysis
895
Preparation and Evaluation of Herbal Formulation Using Natural Extract
896
Preparation and Evaluation of High Nutrition Value Crackers Enriched With Some Leafy Vegetables
897
Preparation and evaluation of hollow molecular imprinted polymer for adsorption of dibenzothiophene
898
Preparation and evaluation of hydrophilic C18 monolithic sorbents for enhanced polar compound retention in liquid chromatography and solid phase extraction
899
Preparation and evaluation of hydrophobically modified core shell calcium carbonate structure by different capping agents
900
Preparation and evaluation of hydrotreating catalysts based on activated carbon derived from oil sand petroleum coke Original Research Article
901
Preparation and evaluation of hydroxylated poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolithic capillary for in-tube solid-phase microextraction coupled to high-performance liquid chromatography
902
preparation and evaluation of imatinib loaded transfersomal gel for the treatment of rheumatoid arthritis
903
Preparation and evaluation of inhalable itraconazole chitosan based polymeric micelles
904
Preparation and evaluation of ionic liquid-calixarene solid-phase microextraction fibres for the determination of triazines in fruit and vegetable samples
905
Preparation and evaluation of lactose-modified monoliths for the adsorption and decontamination of plant toxins and lectins Original Research Article
906
Preparation and evaluation of LaNiO3 thin film electrode with chemical solution deposition
907
Preparation and evaluation of lignosulfonates as a dispersant for gypsum paste from acid hydrolysis lignin
908
Preparation and evaluation of lipid vesicles of camptothecin as targeted drug delivery system
909
PREPARATION AND EVALUATION OF LOCAL MEDIUM FOR CULTURE AND GROWTH OF Trichomonas vaginalis ISOLATED FROM PATIENTS IN MOSUL, IRAQ
910
Preparation and evaluation of matrix containing lidocaine and prilocaine for using in transdermal films
911
Preparation and evaluation of mechanochemically fabricated LSM/ScSZ composite materials for SOFC cathodes
912
Preparation and evaluation of mesoporous cellular foams coating of solid-phase microextraction fibers by determination of tetrabromobisphenol A, tetrabromobisphenol S and related compounds Original Research Article
913
Preparation and evaluation of microporous organogel scaffolds for cell viability and proliferation
914
Preparation and evaluation of minoxidil foamable emu oil emulsion
915
Preparation and Evaluation of Mixed-Ligand Complexes of Cu (II) and Co (II) with Amodiaquine Hydrochloride and Sulphamethazine
916
Preparation and evaluation of molecularly imprinted ionic liquids polymer as sorbent for on-line solid-phase extraction of chlorsulfuron in environmental water samples
917
Preparation and evaluation of molecularly imprinted polymer liquid chromatography column for the separation of Cathine enantiomers
918
Preparation and evaluation of molecularly imprinted polymer liquid chromatography column for the separation of Cathine enantiomers
919
Preparation and evaluation of molecularly imprinted polymeric microspheres by aqueous suspension polymerization for use as a high-performance liquid chromatography stationary phase
920
Preparation and evaluation of molecularly imprinted polymeric microspheres by aqueous suspension polymerization for use as a high-performance liquid chromatography stationary phase Original Research Article
921
Preparation and evaluation of molecularly imprinted solid-phase microextraction fibers for selective extraction of bisphenol A in complex samples
922
Preparation and evaluation of molecularly imprinted solid-phase micro-extraction fibers for selective extraction of phthalates in an aqueous sample Original Research Article
923
Preparation and evaluation of molecularly-defined collagen–elastin–glycosaminoglycan scaffolds for tissue engineering
924
Preparation and Evaluation of Mucoadhesive Beads/Discs of Alginate and Algino-Pectinate of Piroxicam for Colon-Specific Drug Delivery Via Oral Route
925
Preparation and evaluation of nanoparticles composed of thiolated methylated pyridinyl chitosan as a new strategy for bucal drug delivery of insulin
926
Preparation and evaluation of nanoparticles of gum cordia, an anionic polysaccharide for ophthalmic delivery
927
Preparation and evaluation of new composites as anodes for intermediate-temperature solid oxide fuel cells
928
Preparation and evaluation of new l-canavanine derivatives as nitric oxide synthase inhibitors
929
Preparation and evaluation of nickelmesogen for micropacked gas chromatography
930
Preparation and evaluation of nitrogen-terminated silicon nanoparticles: laser annealing effect
931
Preparation and evaluation of n-octadecylphosphonic acid-modified magnesia–zirconia stationary phases for reversed-phase liquid chromatography Original Research Article
932
Preparation and evaluation of non-bonded hyperbranched polymer-coated columns for capillary electrophoresis
933
Preparation and evaluation of novel amphiphilic glycopeptide block copolymers as carriers for controlled drug release
934
Preparation and evaluation of novel chiral stationary phases covalently bound with chiral pseudo-18-crown-6 ethers
935
Preparation and evaluation of novel stationary phases for improved chromatographic purification of pneumocandin B0
936
Preparation and evaluation of o/w type emulsions containing antitumor prostaglandin
937
Preparation and evaluation of o/w type emulsions containing antitumor prostaglandin
938
Preparation and Evaluation of Oleogels Incorporated with Moringa oleifera Leaves Extract in Biscuits Production
939
Preparation and evaluation of orange peel cellulose adsorbents for effective removal of cadmium, zinc, cobalt and nickel
940
Preparation and Evaluation of Orodispersible Tablets Containing Hydroxylbutyl-β-Cyclodextrin-Simvastatin Solid Dispersion
941
PREPARATION AND EVALUATION OF OXYTETRACYCLINE HYDROCHLORIDE MICROBEADS FOR DELAYED RELEASE
942
Preparation and evaluation of packed capillary columns for the separation of nucleic acids by ion-pair reversed-phase high-performance liquid chromatography
943
Preparation and evaluation of PCL-PEG-PCL micelles as potential nanocarriers for ocular delivery of dexamethasone
944
Preparation and evaluation of pellets using acacia and tragacanth by extrusion-spheronization
945
Preparation and Evaluation of Physicochemical Properties of the Doxepin Mucoadhesive Gel
946
Preparation and evaluation of poly (caprolactone fumarate) nanoparticles containing doxorubicin HCl
947
Preparation and Evaluation of Poly (ε-caprolactone) Nanoparticles-in- Microparticles by W/O/W Emulsion Method
948
Preparation and evaluation of poly(4-vinylphenylboronic acid-co-pentaerythritol triacrylate) monolithic column for capillary liquid chromatography of small molecules and proteins
949
Preparation and evaluation of poly(polyethylene glycol methyl ether acrylate-co-polyethylene glycol diacrylate) monolith for protein analysis
950
Preparation and evaluation of polymer/clay nanocomposite surface treatments for concrete durability enhancement
951
Preparation and evaluation of polymer-coated adsorbents for the expanded bed recovery of protein products from particulate feedstocks
952
Preparation and evaluation of polysaccharide sulfates for inhibiting Helicobacter pylori adhesion
953
Preparation and Evaluation of PolyVinyl Alcohol Derivative as Antimicrobial and Antifungal Agents
954
Preparation and Evaluation of Potassium Ferrate as an Oxidant and Coagulant for Potable Water Treatment
955
Preparation and evaluation of propranolol molecularly imprinted solid-phase microextraction fiber for trace analysis of β-blockers in urine and plasma samples
956
Preparation and evaluation of psychometric quality of shyness questionnaire for students of Universities of Isfahan province
957
Preparation and Evaluation of Ribonuclease-Resistant Viral HIV RNA Standards Based on Armored RNA Technology
958
Preparation and Evaluation of Rifampicin and Co-trimoxazoleloaded Nanocarrier against Brucella melitensis Infection
959
Preparation and Evaluation of Samarium (III) Phosphate [153Sm] Colloid (SMPC) for Possible Therapeutic Use
960
Preparation and evaluation of solid-phase microextraction fiber based on molecularly imprinted polymers for trace analysis of tetracyclines in complicated samples
961
Preparation and evaluation of solid-phase microextraction fiber based on nano-structured copolymer of aniline and m-amino benzoic acid coating for the analysis of fatty acids in zooplanktons
962
Preparation and evaluation of solid-phase microextraction fibers based on monolithic molecularly imprinted polymers for selective extraction of diacetylmorphine and analogous compounds
963
Preparation and evaluation of solid-phase microextraction fibres based on functionalized latex nanoparticle coatings for trace analysis of inorganic anions
964
Preparation and evaluation of some newly liquid crystal as antioxidant for base stocks
965
Preparation and evaluation of spherical Ca-deficient hydroxyapatite granules with controlled surface microstructure as drug carriers
966
Preparation and evaluation of stable coating for capillary electrophoresis using coupled chitosan as coated modifier
967
Preparation and Evaluation of Sustained Release Matrix Tablets of Tramadol Hydrochloride Using Glyceryl Palmitostearate
968
Preparation and evaluation of sustained release microballoons of propranolol
969
Preparation and Evaluation of the Antibacterial Effect of Chitosan Nanoparticles Containing Ginger Extract Tailored by Central Composite Design
970
Preparation and Evaluation of the Antibacterial Effect of Magnetic Nanoparticles Containing Gentamicin: A Preliminary In vitro Study
971
Preparation and evaluation of the barrier properties of cellophane membranes modified with fatty acids
972
Preparation and evaluation of the clinical efficacy and safety of tomato lotion containing lycopene
973
Preparation and evaluation of the exotoxin A nano-gold conjugate as a vaccine candidate for Pseudomonas aeruginosa infections
974
Preparation and Evaluation of the Hypocholesterolemic Effect of Fermented Formula
975
Preparation and evaluation of the influence of modified fiber flour wood on the properties of the fresh condition of cement‑based mortars
976
Preparation and Evaluation of the Microstructure and Properties of Natural Rubber/Sodiummontmorillonite Nanocomposites
977
Preparation and evaluation of the mixtures of sulfonate and phenate as lube oil additives
978
Preparation and evaluation of thermo-reversible copolymer hydrogels containing chitosan and hyaluronic acid as injectable cell carriers
979
Preparation and evaluation of thin diamond-like carbon foils for heavy-ion tandem accelerators and time-of-flight spectrometers
980
Preparation and evaluation of thin diamond-like carbon foils for heavy-ion tandem accelerators and time-of-flight spectrometers
981
Preparation and evaluation of tobacco seed oil-modified alkyd resins
982
Preparation and Evaluation of Tretinoin Microemulsion Based on Pseudo-Ternary Phase Diagram
983
PREPARATION AND EVALUATION OF TWO SPECIAL FOODS IN RATS WITH LIVER CIRRHOSIS
984
Preparation and evaluation of uniformly sized solid lipid microcapsules using membrane emulsification
985
Preparation and evaluation of veterinary 20% injectable solution of tylosin
986
Preparation and evaluation of w/o/w type emulsions containing vancomycin
987
Preparation and evaluation of w/o/w type emulsions containing vancomycin
988
Preparation and evaluation of warfarin-β-cyclodextrin loaded chitosan nanoparticles for transdermal delivery
989
Preparation and evaluation of zirconia microspheres as inorganic exchanger in adsorption of copper and nickel ions and as catalyst in hydrogen production from bioethanol
990
Preparation and evaluation of zirconia-coated silica monolith for capillary electrochromatography
991
Preparation and examination of carbon- and binder-free electrodes used in lithium-ion cells
992
Preparation and examination of monolithic in-needle extraction (MINE) device for the direct analysis of liquid samples Original Research Article
993
Preparation and excellent microwave absorption property of three component nanocomposites: Polyaniline-reduced graphene oxide-Co3O4 nanoparticles
994
Preparation and experimental characterization of glass–alumina functionally graded materials
995
Preparation and experiments for a novel kind of foundry core binder made from modified potato starch
996
Preparation and Expression of M2 Gene Plasmid DNA for Potential use in Influenza A Vaccine Production
997
Preparation and Ex-vivo Ocular delivery of Thermo-responsible pluronic F- 127 hydrogel containing Propranolol hydrochlorideloaded Liposomes
998
Preparation and ferroelectric phase transition studies of nanocrystalline BaTiO3
999
Preparation and ferroelectric properties of (Na0.5Bi0.5)0.94Ba0.06TiO3 thin films deposited on Pt electrodes using LaNiO3 as buffer layer
1000
Preparation and ferroelectric properties of barium-ion-doped strontium bismuth tantalate thin films Original Research Article
