بر اساس عنوان

1
Preparation and characterization of SnO2 nanoparticles using high power pulsed laser
2
Preparation and characterization of SnO2/ZnO/TiO2 composite semiconductor with enhanced photocatalytic activity
3
Preparation and characterization of SnO2-BiVO4-CuO catalyst and kinetics of phenazopyridine photodegradation
4
Preparation and characterization of SnO–P2O5 glasses as anode materials for lithium secondary batteries
5
Preparation and characterization of SnS nanocrystals by a triethanolamine-assisted diethylene glycol solution synthesis
6
Preparation and characterization of sodium alginate modified with collagen peptides
7
Preparation and characterization of sodium bearing perovskite phases
8
Preparation and characterization of sodium carboxymethylcellulose/poly(N-isopropylacrylamide)/clay semi-IPN nanocomposite hydrogels
9
Preparation and characterization of sodium caseinate films reinforced with cellulose derivatives
10
Preparation and characterization of sodium dodecyl sulfate doped polypyrrole solid phase micro extraction fiber and its application to endocrine disruptor pesticide analysis
11
Preparation and characterization of sodium titanate nanowires from brookite nanocrystallites
12
Preparation and characterization of sol–gel Al2O3/Ni–P composite coatings on carbon steel
13
Preparation and characterization of sol–gel Al-doped ZnO thin films and ZnO nanowire arrays grown on Al-doped ZnO seed layer by hydrothermal method
14
Preparation and characterization of sol–gel bioactive glass coating for improvement of biocompatibility of human body implant
15
Preparation and Characterization of Sol-Gel Coatings Doping with Cerium Ingredients on Aluminum Alloy Surface
16
Preparation and characterization of sol–gel derived (1 0 0)-textured Pb(Zr,Ti)O3 thin films: PbO seeding role in the formation of preferential orientation Original Research Article
17
Preparation and characterization of sol–gel derived (Li,Ta,Sb) modified (K,Na)NbO3 lead-free ferroelectric thin films
18
Preparation and characterization of sol–gel derived mesoporous titania spheroids
19
Preparation and characterization of sol–gel derived zirconia coated carbon fiber
20
Preparation and characterization of sol–gel derived ZnTiO3 nanocrystals
21
Preparation and characterization of solid biomass fuel made from rice straw and rice bran
22
Preparation and characterization of solid dispersions of carvedilol with PVP K30
23
Preparation and characterization of solid electrolytes La2−xAxMo2−yWyO9 (A=Sm, Bi)
24
Preparation and characterization of solid polymer electrolytes based on PHEMO and PVDF-HFP
25
Preparation and characterization of soluble methyl-β-cyclodextrin functionalized single-walled carbon nanotubes
26
Preparation and characterization of some ferromagnetic glass–ceramics contains high quantity of magnetite
27
Preparation and characterization of some gold nanometric compounds with simple organic materials as precursor: Spectroscopic, biological and anti-cancer assessments
28
Preparation and characterization of some graphene based nanocomposite materials
29
Preparation and Characterization of Some Metal Complexes with Heterocyclic Azo Ligand (4-SuBAI)
30
Preparation and Characterization of Some Metal Complexes with New Heterocyclic Schiff-Azo Ligand
31
Preparation and characterization of some structural variants of Cp*Ti(1,2-propandiolato) complexes
32
Preparation and characterization of some substituted bioglasses and their ceramic derivatives from the system SiO2–Na2O–CaO–P2O5 and effect of gamma irradiation
33
Preparation and Characterization of Some Transition Metal Complexes with ( N ,S ,O) New Schiff Base Ligand
34
Preparation and characterization of sorbitol modified nanoclay with high amylose bionanocomposites
35
Preparation and characterization of space durable polymer nanocomposite films
36
Preparation and characterization of spark-anodized Al-alloys: Physical, chemical and tribological properties
37
Preparation and characterization of SPEEK/MMT-STA composite membrane for DMFC application
38
Preparation and characterization of spermine-exchanged montmorillonite and interaction with the herbicide fluometuron
39
Preparation and characterization of spherical activated carbons from oil agglomerated bituminous coals for removing organic impurities from water Original Research Article
40
Preparation and characterization of spherical Li1+xV3O8 cathode material for lithium secondary batteries
41
Preparation and characterization of spherical nickel-doped carbonaceous resin as hydrogenation catalysts I. Carbonization procedures Original Research Article
42
Preparation and characterization of spherical nickel-doped carbonized resin as hydrogenation catalysts: II. Thermal decomposition of resin and preparation of metal-doped catalysts with different nickel loadings Original Research Article
43
Preparation and characterization of spherical polymer packings from polybutadiene for size-exclusion chromatography
44
Preparation and characterization of spherical silica–porphyrin catalysts obtained by the sol–gel methodology
45
Preparation and characterization of spinel LiCoxMn2−xO4 by oxalate precipitation
46
Preparation and characterization of spinel nickel ferrite obtained by the soft mechanochemically assisted synthesis
47
Preparation and characterization of spinel-type MeFe2O4 (Me = Cu, Cd, Ni and Zn) for catalyst applications
48
Preparation and characterization of sponge film made from feathers
49
Preparation and characterization of sponge-like composites by cross-linking hyaluronic acid and carboxymethylcellulose sodium with adipic dihydrazide
50
Preparation and characterization of spray deposited NiMoO4 thin films for photovoltaic electrochemical studies
51
Preparation and characterization of spray deposited n-type WO3 thin films for electrochromic devices
52
Preparation and characterization of spray deposited photoactive Sb2S3 and Sb2Se3 thin films using aqueous and non-aqueous media
53
Preparation and characterization of spray pyrolyzed nickel oxide (NiO) thin films
54
Preparation and characterization of spray-deposited Cu2ZnSnS4 thin films
55
Preparation and characterization of sputtered Cu films containing insoluble Nb
56
Preparation and characterization of squeeze cast-Al–Si piston alloy reinforced by Ni and nano-Al_2 O_3 particles
57
Preparation and characterization of Sr4Al2O7:Eu3+, Eu2+ phosphors
58
Preparation and characterization of SrCo0.8Fe0.2O3−δ–SrSnO3 oxygen-permeable composite membrane
59
Preparation and characterization of SrFeCo0.5O3.25+δ by gelcasting
60
Preparation and characterization of Sr–hardystonite (Sr2ZnSi2O7) for bone repair applications
61
Preparation and characterization of SrSnO3 nanorods Original Research Article
62
Preparation and characterization of Sr-Ti-hardystonite (Sr-Ti-HT) nanocomposite for bone repair application
63
Preparation and characterization of SrTiO3/BaTiO3 thin multilayer films deposited on Pt/Ti/SiO2/Si substrate by radio frequency magnetron sputtering
64
Preparation and characterization of stable chitosan nanofibrous membrane for lipase immobilization
65
Preparation and characterization of stable cross-linked enzyme aggregates of novel laccase enzyme from Shewanella putrefaciens and using malachite green decolorization
66
Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment Original Research Article
67
Preparation and characterization of stable monodisperse silver nanoparticles via photoreduction
68
Preparation and Characterization of Stable Nanoliposomal Formulation of Fluoxetine as a Potential Adjuvant Therapy for Drug-Resistant Tumors
69
Preparation and characterization of stable Ru nanoparticles embedded on the ordered mesoporous carbon material for applications in Fischer–Tropsch synthesis Original Research Article
70
Preparation and characterization of starch crosslinked with sodium trimetaphosphate and hydrolyzed by enzymes
71
Preparation and characterization of starch nanoparticles through ultrasonic-assisted oxidation methods
72
Preparation and characterization of starch/carrageenan edible films
73
Preparation and characterization of starch/cyclodextrin bioadhesive microspheres as platform for nasal administration of Gabexate Mesylate (Foy®) in allergic rhinitis treatment
74
Preparation and characterization of starch/poly(l-lactic acid) hybrid foams
75
Preparation and characterization of starch-grafted multiwall carbon nanotube composites
76
Preparation and characterization of starch-poly-ε-caprolactone microparticles incorporating bioactive agents for drug delivery and tissue engineering applications
77
Preparation and characterization of strontium and magnesium doped lanthanum gallates as the electrolyte for IT-SOFC
78
Preparation and characterization of strontium zirconate (SrZrO3) fine powders
79
Preparation and Characterization of Structure and Corrosion Resistivity of Polyurethane /Montmorillonite/Cerium Nitrate Nanocomposites
80
Preparation and characterization of subcellular fractions suitable for studies of xenobiotic metabolism from leaf sheaths of a marine seagrass: Posidonia oceanica (Linnaeus) Delile
81
Preparation and characterization of sub-micro LiNi0.5−xMn1.5+xO4 for 5 V cathode materials synthesized by an ultrasonic-assisted co-precipitation method
82
Preparation and characterization of substituted pentaarylcyclopentadienyliron dicarbonyl bromide complexes containing methyl or fluorine substituents on the arene rings
83
Preparation and characterization of succinic acid deamidated wheat gluten microspheres for encapsulation of fish oil
84
Preparation and Characterization of Sugar Cane Wax Microspheres Containing Indomethacin
85
Preparation and characterization of sulfated carboxymethyl cellulose nanofiltration membranes with improved water permeability Original Research Article
86
Preparation and characterization of sulfated zirconia (SO42−/ZrO2)/Nafion composite membranes for PEMFC operation at high temperature/low humidity
87
Preparation and characterization of sulfated zirconia catalysts obtained via various procedures Original Research Article
88
Preparation and characterization of sulfonated amine-poly(ether sulfone)s for proton exchange membrane fuel cell
89
Preparation and characterization of sulfonated PEEK-WC membranes for fuel cell applications: A comparison between polymeric and composite membranes
90
Preparation and characterization of sulfonated poly(arylene ether ketone ketone sulfone)s for ion exchange membranes Original Research Article
91
Preparation and characterization of sulfonated poly(ether ether ketone ketone) proton exchange membranes for fuel cell application
92
Preparation and characterization of sulfonated poly(ether sulfone)/sulfonated poly(ether ether ketone) blend membrane for vanadium redox flow battery
93
Preparation and characterization of sulfonated poly(tetra phenyl ether ketone sulfone)s for proton exchange membrane fuel cell
94
Preparation and characterization of sulfonated polyethersulfone for cation-exchange membranes
95
Preparation and characterization of sulfonated polyethersulfone membranes by a facile approach
96
Preparation and characterization of sulfonated polysulfone and N-phthloyl chitosan blend composite cation-exchange membrane for desalination Original Research Article
97
Preparation and characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells
98
Preparation and characterization of sulfonic acid-functionalized single-walled carbon nanotubes
99
Preparation and characterization of sulfonyl-hydrazine attached poly(styrene-divinylbenzene) beads for separation of albumin
100
Preparation and characterization of sulfur–polypyrrole composites with controlled morphology as high capacity cathode for lithium batteries
101
Preparation and characterization of super-hydrophilic porous TiO2 coating films
102
Preparation and characterization of superhydrophobic conductive fluorinated carbon blacks Original Research Article
103
Preparation and characterization of superhydrophobic silica-based surfaces by using polypropylene glycol and tetraethoxysilane precursors
104
Preparation and characterization of superionic materials in a new mixed system (Cu(1−x)AgxI)–(Ag2O)–(P2O5), (0.05≤x≤0.25)
105
Preparation and characterization of superparamagnetic nanocomposites of aluminosilicate/silica/magnetite
106
Preparation and characterization of superporous agarose–reticulated vitreous carbon electrodes as platforms for electrochemical bioassays Original Research Article
107
Preparation and characterization of superporous hydrogels as gastroretentive drug delivery system for rosiglitazone maleate
108
Preparation and Characterization of Supported Bimetallic Pt–Au and Pt–Cu Catalysts from Bimetallic Molecular Precursors
109
Preparation and characterization of supported dense oxygen permeating membrane of mixed conductor La2NiO4+δ
110
Preparation and characterization of supported H3PW12O40 on silica gel: a potential catalyst for green chemistry processes
111
Preparation and Characterization of Supported Molybdenum and Tungsten Schiff Base Complexes on MCM-41 as Nanocatalysts for the Epoxidation of Olefins
112
Preparation and Characterization of Supported Molybdenum and Tungsten Schiff Base Complexes on MCM-41 as Nanocatalysts for the Epoxidation of Olefins
113
Preparation and characterization of supported Pt–Ru catalysts with a high Ru content
114
Preparation and characterization of surface bond-conjugated TiO2/SiO2 and photocatalysis for azo dyes
115
Preparation and characterization of surface crosslinked TPS/PVA blend films
116
Preparation and characterization of surface crosslinked TPS/PVA blend films
117
Preparation and characterization of surface modified electrospun membranes for higher filtration flux
118
Preparation and characterization of surface modified silica nanoparticles with organo-silane compounds
119
Preparation and characterization of surface modified γ-Fe2O3 (maghemite)–silica nanocomposites used for the purification of benzaldehyde lyase Original Research Article
120
Preparation and characterization of surface-sulfonated phenylsilsesquioxane–methylsilsesquioxane particles
121
Preparation and characterization of surfactant-induced nanoporous PMMA film
122
Preparation and characterization of swelling porous carbon beads Original Research Article
123
Preparation and characterization of symmetrical bis[4-chloro-2-pyrimidyl] dichalcogenide (S, Se, Te) and unsymmetrical 4-chloro-2-(arylchalcogenyl) pyrimidine: X-ray crystal structure of 4-chloro-2-(phenylselanyl) pyrimidine and 2-(p-tolylselanyl)-4-chlor
124
Preparation and characterization of TaCxN1 − x coatings on biomedical 316L stainless steel
125
Preparation and Characterization of Tamarind Gum/Sodium Alginate Composite Gel Beads
126
Preparation and characterization of Tamoxifen loaded silica and NH2 functionalized mesoporous silica nanoparticles as delivery systems against MCF-7 breast cancer cells
127
Preparation and characterization of TaNbTiW multi-element alloy films
128
Preparation and characterization of tantalum/polyaniline composite based chemiresistor type sensor for hydrogen gas sensing application
129
Preparation and characterization of Tb3+ and Tb(sal)3·nH2O doped PC:PMMA blend
130
Preparation and Characterization of Technetium Complexes with Schiff Base and Phosphine Coordination,1. Complexes of Technetium-99g and -99m with Substituted acac2en and Trialkyl Phosphines (where acac2en = N ,N ethylenebis[acetylacetone iminato] )
131
Preparation and characterization of telluride glasses
132
Preparation and characterization of temperature and pH-sensitive chitosan material and its controlled release on coenzyme A
133
Preparation and characterization of temperature-responsive poly(N-isopropylacrylamide-co-N,N′-methylenebisacrylamide) monolith for HPLC
134
Preparation and characterization of template-free mordenite type zeolite and comparison of m-xylene isomerization reaction over mordenite and SAPO-11
135
Preparation and characterization of TEMPO-oxidized cellulose nanofibril films with free carboxyl groups
136
Preparation and characterization of TeO2–WO3–Li2O glasses
137
Preparation and characterization of ternary blends composed of polylactide, poly(ɛ-caprolactone) and starch
138
Preparation and characterization of tetragonal dominant nanocrystalline ZrO2 obtained via direct precipitation
139
Preparation and Characterization of Tetragonal Zirconium Oxide Nanocrystals from Isophthalic Acid-Zirconium(IV) Nanocomposite As a New Precursor
140
Preparation and characterization of tetragonal-ZrO2 nanopowders by a molten hydroxides method
141
Preparation and characterization of thallium(I) doped molybdenum heteropolyoxometalate semiconducting thin films
142
Preparation and characterization of the 1:1 adducts of mercury(II) halides with N-benzyl- and N-p-tolyl-2-oxo-1-naphthylideneamine. The crystal and molecular structures of two isostructural di-μ-halo-bis[halo(N-benzyl-2-oxo-1-naphthylideneamine)mercury(II
143
Preparation and characterization of the amorphous tungsten cone field emitter arrays by Ar+ etching
144
Preparation and characterization of the antimony telluride hexagonal nanoplates
145
Preparation and characterization of the bimetallic Pt–Au/ZnO/Al2O3 catalysts: Influence of Pt–Au molar ratio on the catalytic activity for toluene oxidation
146
Preparation and characterization of the bismuth sodium titanate (Na0.5Bi0.5TiO3) ceramic doped with ZnO
147
Preparation and characterization of the carbonized material of phenol–formaldehyde resin with addition of various organic substances Original Research Article
148
Preparation and characterization of the carbon–Microsilica composite sorbent
149
Preparation and Characterization of the Catalyst Based on the Copper Nanoparticles
150
Preparation and characterization of the CdS/PSA core-shell “egg”
151
Preparation and characterization of the electrodeposited Cr–Al2O3/SiC composite coating
152
Preparation and characterization of the electrodeposited Fe–Cr alloy film
153
Preparation and characterization of the electrospun PCS/TiO2 fiber mat by electron beam irradiation
154
Preparation and characterization of the endohedral metallofullerene Lu@C82 Original Research Article
155
Preparation and characterization of the first coordination compounds of tetrazol-2-ylacetic acid
156
Preparation and characterization of the graft copolymer of chitosan with poly[rosin-(2-acryloyloxy)ethyl ester]
157
Preparation and characterization of the graft copolymer of chitosan with poly[rosin-(2-acryloyloxy)ethyl ester]
158
Preparation and characterization of the graphene–carbon nanotube/CoFe2O4/polyaniline composite with reticular branch structures
159
Preparation and Characterization of the Inter-Polymer Complexes between Polyallylamine Hydrochloride and Polyvinyl Sulfonic Acid
160
Preparation and characterization of the intumescent fire retardant coating with a new flame retardant
161
Preparation and characterization of the ITO surface and the Al/Alq3/ITO heterostructure for OLEDs
162
Preparation and characterization of the layered borophosphates MII(H2O)2[B2P2O8(OH)2]·H2O (MII = Fe, Co, Ni)
163
Preparation and characterization of the layered hybrids (CnH2n+1NH3)2FeCl4 Original Research Article
164
Preparation and characterization of the lead-free piezoelectric ceramic of Bi0.5Na0.5TiO3 doped with CuO
165
Preparation and characterization of the Mo(C)N/Mo(C) multilayer coating
166
Preparation and characterization of the novel water-crosslinked cellulose reinforced poly(butylene succinate) composites
167
Preparation and characterization of the organic–inorganic hybrid membrane for biodiesel production
168
Preparation and characterization of the pentacyanoferrate(II) on the surface of N-(4pyridilmethylidene)chitosan
169
Preparation and characterization of the perovskites BaCe1 − xBixO3
170
Preparation and characterization of the self-aggregated dimer of meso-p-hydroxyphenylporphyrin and studies on the self-aggregate reaction mechanism
171
Preparation and characterization of the simulated burnup americium-containing uranium–plutonium mixed oxide fuel
172
Preparation and characterization of the sol–gel nano-bioactive glasses modified by the coupling agent gamma-aminopropyltriethoxysilane
173
Preparation and characterization of the spinel oxide ZnCo2O4 obtained by sol–gel method
174
Preparation and characterization of the TiO2 ultrafine particles by detonation method
175
Preparation and characterization of the TiO2/polymer complex nanomaterial
176
Preparation and characterization of the titanium dioxide thin films used for pH electrode and procaine drug sensor by sol–gel method
177
Preparation and Characterization of Theophylline-Chitosan Beads as an Aapproach to Colon Delivery
178
Preparation and characterization of thermal/pH-sensitive hydrogel from carboxylated nanocrystalline cellulose
179
Preparation and characterization of thermally crosslinked chlorine resistant thin film composite polyamide membranes for reverse osmosis Original Research Article
180
Preparation and characterization of thermally evaporated titanium phthalocyanine dichloride thin films Original Research Article
181
Preparation and characterization of thermally stable poly(piperazine amide)/PPBES composite nanofiltration membrane
182
Preparation and characterization of thermally stable proton-conducting composite sheets composed of phosphosilicate gel and polyimide
183
Preparation and characterization of thermoplastic olefin/nanosilica composites using a silane-grafted polypropylene matrix
184
Preparation and characterization of thermo-responsive amphiphilic triblock copolymer and its self-assembled micelle for controlled drug release
185
Preparation and Characterization of Thermoresponsive In-situ Forming Poloxamer Hydrogel for Controlled Release of Nile red-loaded Solid Lipid Nanoparticles
186
Preparation and characterization of thermosensitive magnetic particles
187
Preparation and characterization of thermosensitive magnetic particles
188
Preparation and characterization of thermosensitive organic–inorganic hybrid microgels with functional Fe3O4 nanoparticles as crosslinker
189
Preparation and characterization of thermosensitive pluronic F127-b-poly(ɛ-caprolactone) mixed micelles
190
Preparation and characterization of thick porous SiO2 film for multilayer pyroelectric thin film IR detector
191
Preparation and characterization of thin electrodes for lead–acid batteries
192
Preparation and characterization of thin film nanocomposite membrane for pervaporative dehydration of aqueous alcohol solutions Original Research Article
193
Preparation and characterization of thin films by plasma polymerization of glycidoxypropyltrimethoxysilane at different plasma powers and exposure times
194
Preparation and characterization of thin films of electrodeposited CdTe semiconductors
195
Preparation and characterization of thin transducer layers sensitive to free chlorine in water
196
Preparation and characterization of thin-film nanocomposite membranes embedded with poly(methyl methacrylate) hydrophobic modified multiwalled carbon nanotubes by interfacial polymerization
197
Preparation and characterization of thiocyanate-selective electrodes based on new complexes of copper(II) as neutral carriers Original Research Article
198
Preparation and characterization of thiophene copolymers with second order non-linear optical properties
199
Preparation and characterization of thiophilic cryogels with 2-mercapto ethanol as the ligand for IgG purification
200
Preparation and characterization of three charge-transfer complexes
201
Preparation and characterization of three new charge transfer complexes of C60-tetracyanoethyleneoxide with tetrathiafulvalene derivatives
202
Preparation and characterization of three types of dinuclear iron(III) complexes with H2salbn, N,N′-disalicylidene-1,4-diaminobutane
203
Preparation and characterization of three-dimensional braided carbon/Kevlar/epoxy hybrid composites
204
Preparation and characterization of three-dimensional carbon fiber reinforced zirconium carbide composite by precursor infiltration and pyrolysis process
205
Preparation and characterization of three-dimensional mesoporous crystals of tungsten oxide
206
Preparation and characterization of three-dimensionally ordered macroporous styrene/p-methylstyrene syndiotactic copolymer
207
Preparation and characterization of three-dimensionally ordered macroporous syndiotactic poly(p-methylstyrene)
208
Preparation and characterization of three-dimensionally ordered macroporous yttria-stabilized zirconia by aqueous organic gel route
209
Preparation and characterization of Ti and V modified analcime from local kaolin
210
Preparation and characterization of Ti(C,N)-based nano-cermets
211
Preparation and characterization of Ti3SiC2 powder
212
Preparation and characterization of TiN coatings produced by combination of PI3D and ICP assisted magnetron PVD
213
Preparation and characterization of tin diselenide thin film by spray pyrolysis technique
214
Preparation and characterization of TiN films by electron cyclotron resonance (ECR) sputtering for diffusion barrier applications
215
Preparation and Characterization of Tin Oxide Nanowires
216
Preparation and characterization of tin oxide, SnO2 nanoparticles decorated graphene
217
Preparation and characterization of tin-based three-dimensional cellular anode for lithium ion battery
218
Preparation and characterization of TiO2 coated with a thin carbon layer for enhanced photocatalytic activity under fluorescent lamp and solar light irradiations Original Research Article
219
Preparation and characterization of TiO2 Fe2O3 nanocomposite by sol gel method
220
Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method
221
Preparation and characterization of TiO2 nanosponge
222
Preparation and characterization of TiO2 photocatalysts co-doped with iron (III) and lanthanum for the degradation of organic pollutants
223
Preparation and characterization of TiO2 thin films using vacuum ultraviolet light in a sol–gel process
224
Preparation and characterization of TiO2, ZnO, and TiO2/ZnO nanofilms via sol–gel process
225
Preparation and characterization of TiO2/porous carbon multilayers
226
Preparation and characterization of TiO2-based plasma-sprayed coatings for NOx abatement
227
Preparation and characterization of TiO2-cationic hybrid nanoparticles as electrophoretic particles
228
Preparation and Characterization of TiO2-LaFeO3 based Mixed Matrix Membrane for Oily Wastewater Treatment
229
Preparation and characterization of TiO2-NTs/SnO2-Sb electrodes by electrodeposition
230
Preparation and characterization of TiO2-PEG NPs loaded doxorubicin
231
Preparation and characterization of TiO2-regenerated cellulose inorganic–polymer hybrid membranes for dehydration of caprolactam
232
Preparation and characterization of TiO2–SiO2 nano-composite thin films
233
Preparation and characterization of Ti-supported nanostructured Pt electrodes by electrophoretic deposition
234
Preparation and characterization of titanate nanotubes/carbon composites
235
Preparation and characterization of titanate-modified Boehmite–polyamide-6 nanocomposites
236
Preparation and characterization of titania- and organo-pillared clay hybrid photocatalysts capable of oxidizing aqueous bisphenol A under visible light
237
Preparation and characterization of titania based nanowires
238
Preparation and characterization of titania nanoparticle produced from Ti-flocculated sludge with paper mill wastewater
239
Preparation and characterization of titanium dioxide core and polymer shell hybrid composite particles prepared by two-step dispersion polymerization
240
Preparation and characterization of titanium dioxide nanoparticle/polystyrene composites via radical polymerization
241
Preparation and characterization of titanium dioxide thin films by SILAR method
242
Preparation and characterization of titanium dioxide nanocomposite fibers
243
Preparation and characterization of titanium oxy-nitride thin films
244
Preparation and characterization of translucent PLZT8/65/35 ceramics from nano-sized powders produced by a high-energy ball-milling process
245
Preparation and characterization of transparent conductive ZnO:Ga films by DC reactive magnetron sputtering
246
Preparation and Characterization of Transparent Electrochromic Ti02 Thin Films Prepared by Alkoxide Route
247
Preparation and characterization of transparent Eu doped Y2O3 aerogel monoliths, for application in luminescence
248
Preparation and characterization of transparent polyarylethers-silica hybrid membranes with covalently connected phases
249
Preparation and characterization of transparent silk fibroin/cellulose blend films
250
Preparation and characterization of transparent Tm:YAG ceramics
251
Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency
252
Preparation and characterization of transparent/conductive nano-composites films
253
Preparation and characterization of trans-RhCl(CO)(TPPTS)2-intercalated layered double hydroxides
254
Preparation and characterization of triangular clusters [M3Q4(acac)3(py)3]+ (M=Mo, W; Q=S, Se)
255
Preparation and characterization of trifluoroethyl aliphatic carboxylates as co-solvents for the carbonate-based electrolyte of lithium-ion batteries
256
Preparation and characterization of trifluoromethylaniline oligomers
257
Preparation and characterization of trilobal activated carbon fibers Original Research Article
258
Preparation and Characterization of Trimethyl Chitosan Nanospheres Encapsulated with Tetanus Toxoid for Nasal Immunization Studies
259
Preparation and characterization of tubular ceramic membranes for treatment of oil emulsions
260
Preparation and characterization of tubular porous silicon carbide membrane supports
261
Preparation and characterization of tunable YVO4: Bi3+, Sm3+ phosphors
262
Preparation and Characterization of Tungsten-substituted Molybdenum Disulfide Nanorods
263
Preparation and Characterization of Two Azo Dyes For Dibenzothiophen by The Diazotization Reaction and Studying Their action as Acid-Base Indicators.
264
Preparation and characterization of two novel three-dimensional supramolecular networks with blue photoluminescence
265
Preparation and characterization of two supramolecular complexes with 5-amino-2,4,6-triiodoisophthalic acid under N-donor auxiliary ligand intervention
266
Preparation and characterization of Type II anion exchange membranes from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)
267
Preparation and characterization of ultra thin LB films using pyrazoline organic nanoparticles
268
Preparation and characterization of ultra violet (UV) radiation cured bio-degradable films of sago starch/PVA blend
269
Preparation and characterization of ultrafiltration membranes for toxic removal from wastewater Original Research Article
270
Preparation and characterization of ultrafine alumina via sol–gel polymeric route
271
Preparation and characterization of ultrafine cobalt powders and supported cobalt catalysts by freeze-drying
272
Preparation and characterization of ultrathin alumina hollow fiber microfiltration membrane Original Research Article
273
Preparation and characterization of ultrathin polymeric films
274
Preparation and Characterization of Undecylenoyl Phenylalanine Loaded-Nanostructure Lipid Carriers (NLCs) as a New α-MSH Antagonist and Antityrosinase Agent
275
Preparation and characterization of uniform polyaniline nano-fibrils using the anodic aluminum oxide template
276
Preparation and characterization of uniform polyaniline nano-fibrils using the anodic aluminum oxide template
277
Preparation and characterization of uniformly coated particles by homogeneous precipitation (cobalt compounds on nickel compounds)
278
Preparation and characterization of uniform-sized chitosan microspheres containing insulin by membrane emulsification and a two-step solidification process
279
Preparation and characterization of uniform-sized chitosan/silver microspheres with antibacterial activities
280
Preparation and characterization of unique zirconia crystals within pores via a sol–gel-hydrothermal method
281
Preparation and characterization of upconversion luminescent LaF3:Yb3+,Er3+/LaF3 core/shell nanocrystals
282
Preparation and characterization of upconversion nanocomposite for β-NaYF4:Yb3+,Er3+-supported TiO2 nanobelts
283
Preparation and Characterization of UPR/LNR/Glass Fiber Composite by using UnsaturatedPolyester Resin (PET) from PET Wastes
284
Preparation and characterization of UV-curable polymeric support for covalent immobilization of xylanase enzyme
285
Preparation and characterization of UV-cured epoxy nanocomposites based on o-montmorillonite modified with maleinized liquid polybutadienes
286
Preparation and characterization of UZM-5/polyamide thin film nanocomposite membrane for dewaxing solvent recovery
287
Preparation and characterization of V/TiO2 nanocatalyst with magnetic nucleus of iron
288
Preparation and characterization of V2O3 micro-crystals via a one-step hydrothermal process
289
Preparation and characterization of vacuum deposited semiconducting nanocrystalline polymeric thin film sensors for detection of HCl
290
Preparation and characterization of V-Ag-O catalysts for the selective oxidation of toluene Original Research Article
291
Preparation and characterization of vanadia–titania mixed oxide for immobilization of Serratia rubidaea CCT 5732 and Klebsiella marcescens bacteria
292
Preparation and characterization of vanadyl phosphates modified with two trivalent metal cations
293
Preparation and characterization of vancomycin releasing PHBV coated 45S5 Bioglass®-based glass–ceramic scaffolds for bone tissue engineering
294
Preparation and Characterization of Various Membrane Morphologies for Lateral Flow Immunoassay Development
295
Preparation and characterization of vinyl-functionalized carbon spheres by allylamine
296
Preparation and characterization of vinyl-functionalized mesoporous organosilica-coated solid-phase microextraction fiber
297
Preparation and characterization of vinyltriethoxysilane (VTES) modified silicalite-1/PDMS hybrid pervaporation membrane and its application in ethanol separation from dilute aqueous solution
298
Preparation and characterization of visible light responsive Fe2O3–TiO2 composites
299
Preparation and Characterization of Visible-Light-Driven Carbon-Sulfur-Codoped TiO2 Photocatalysts
300
Preparation and characterization of visible-light-driven europium doped mesoporous titania photocatalyst
301
Preparation and characterization of visible-light-driven N–F–Ta tri-doped TiO2 photocatalysts
302
Preparation and characterization of visible-light-driven plasmonic photocatalyst Ag/AgCl/TiO2 nanocomposite thin films
303
Preparation and characterization of visible-light-driven titania photocatalyst co-doped with boron and nitrogen
304
Preparation and characterization of vitexin powder micronized by a supercritical antisolvent (SAS) process
305
Preparation and characterization of vitrified glass matrix for high level waste from MOX fuel processing
306
Preparation and Characterization of VO2 Nanopowders
307
Preparation and characterization of VOx/TiO2 catalytic coatings on stainless steel plates for structured catalytic reactors Original Research Article
308
Preparation and characterization of water in oil emulsion via drop break-off
309
Preparation and characterization of water soluble poly(acrylic acid)–hydroxypropyl cellulose composite
310
Preparation and characterization of water soluble poly(acrylic acid)–hydroxypropyl cellulose composite
311
Preparation and characterization of waterborne polyurethane/attapulgite nanocomposites
312
Preparation and characterization of water-soluble monodisperse magnetic iron oxide nanoparticles via surface double-exchange with DMSA
313
Preparation and characterization of water-soluble N-alkylated chitosan
314
Preparation and characterization of water-soluble N-alkylated chitosan
315
Preparation and characterization of water-soluble ZnSe:Cu/ZnS core/shell quantum dots
316
Preparation and characterization of weak-base anion exchange membrane
317
Preparation and characterization of well-dispersed and stable Co/SiO2 catalysts using the ammonia method Original Research Article
318
Preparation and characterization of well-dispersed waterborne polyurethane/CaCO3 nanocomposites
319
Preparation and characterization of well-ordered MoOx films on Cu3Au(1 0 0)–oxygen substrate (CAOS)
320
Preparation and characterization of well-ordered, thin niobia films on a metal substrate
321
Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites
322
Preparation and characterization of whey protein isolate films reinforced with porous silica coated titania nanoparticles Original Research Article
323
Preparation and Characterization of WO3 Electrochromic Films Obtained by the Sol-Gel Process
324
Preparation and Characterization of WO3 Nanosheets and Au/WO3 Nanocomposite for Rabid Photocatalytic degradation of methylene blue dye
325
Preparation and Characterization of Wood Dust Natural Fiber Re-Enforced Polymer Composite
326
Preparation and characterization of WOx/ZrO2 nanosized catalysts with high WOx dispersion threshold and acidity
327
Preparation and Characterization of W-Type Hexaferrite Doped with La3+
328
Preparation and characterization of xerogel catalyst microspheres
329
Preparation and characterization of Y2O3 hollow spheres
330
Preparation and characterization of Y2O3:Eu phosphors by combustion process
331
Preparation and characterization of Y2O3–Sm2O3 co-doped ceria electrolyte for IT-SOFCs
332
Preparation and characterization of Y2Zr2O7 nanocrystals and their photocatalytic properties
333
Preparation and Characterization of Y3A5O12: Cr3+ Nanophosphor by Electrochemical Technique
334
Preparation and characterization of Y3Al5O12 (YAG) nano-powder by co-precipitation method
335
Preparation and characterization of Y3Al5O12:Ln (Ln=Eu, Ce) phosphor powders by ultrasonic atomization and co-precipitation process
336
Preparation and Characterization of Y3Sc2Ga3O12 Nano-Polycrystalline Powders by Co-Precipitation Method
337
Preparation and characterization of YADH-bound magnetic nanoparticles
338
Preparation and characterization of Yb:Y3Al5O12 fiber crystals
339
Preparation and characterization of Yb2O3–Al2O3 glasses by the Pechini sol–gel method combined with flame synthesis
340
Preparation and characterization of yellow-green fluorescence emitting SiC-encapsulated graphite
341
Preparation and characterization of yttria-stabilized zirconia nanotubes
342
Preparation and Characterization of Yttrium Oxide Nanoparticles at Different Calcination Temperatures from Yttrium Hydroxide Prepared by Hydrothermal and Hydrothermal microwave Methods
343
Preparation and characterization of zein/chitosan complex for encapsulation of α-tocopherol, and its in vitro controlled release study
344
Preparation and characterization of zeolite catalysts for etherification reaction
345
Preparation and Characterization of Zeolite Membrane for Bioethanol Purification
346
Preparation and characterization of zero valent iron powders via transfer type reductor using iron oxide from the acid regeneration process
347
Preparation and characterization of zinc hydroxide carbonate and porous zinc oxide particles
348
Preparation and characterization of zinc oxide nanoparticles and their sensor applications for electrochemical monitoring of nucleic acid hybridization
349
Preparation and characterization of zinc sulfide nanoparticles under high-gravity environment
350
PREPARATION AND CHARACTERIZATION OF ZINC(II) AND NICKEL(II) PHENYLETHANOLDITHIOCARBAMATE
351
Preparation and characterization of zinc-exchanged montmorillonite and its effectiveness as aflatoxin B1 adsorbent
352
Preparation and characterization of zirconium films for first mirror application in fusion devices
353
Preparation and characterization of zirconium oxide particles filled acrylonitrile-methyl acrylate-sodium sulfonate acrylate copolymer hybrid membranes Original Research Article
354
Preparation and characterization of Zn substituted Li–Mg ferrites
355
Preparation and characterization of Zn18O/Zn16O isotope heterostructure thin films
356
Preparation and characterization of Zn2SiO4: Mn phosphors with hydrothermal methods
357
Preparation and characterization of ZnGa2O4:Mn phosphors by multistage precipitation method
358
Preparation and characterization of ZnIn2S4 thin films deposited by spray pyrolysis for hydrogen production
359
Preparation and Characterization of ZnO and CdWO4 Nanopowders for Radiation Sensing
360
Preparation and Characterization of ZnO Nanocrystalline for Photovoltaic Applications Using Laser Ablation Technique
361
Preparation and Characterization of ZnO Nanocrystallines in the Presence of an Ionic Liquid Using Microwave Irradiation and Photocatalytic Activity
362
Preparation and characterization of ZnO nanofibers by using electrospun PVA/zinc acetate composite fiber as precursor
363
Preparation and Characterization of ZnO Nanoparticles by Laser Ablation in NaOH Aqueous Solution
364
Preparation and characterization of ZnO nanoparticles using functionalized SBA-15 with 3-aminopropyltriethoxysilane (APTS) as a host
365
Preparation and Characterization of ZnO Nanoparticles via Thermal Decomposition from Zinc(II) Schiff Base Complex as New Precursor
366
Preparation and characterization of ZnO nanorods grown into aligned TiO2 nanotube array
367
Preparation and characterization of ZnO nanorods from NaOH solutions with assisted electrical field
368
Preparation and characterization of ZnO nanospindles and ZnO@ZnS core–shell microspindles
369
Preparation and characterization of ZnO nanowires
370
Preparation and characterization of ZnO particles embedded in organic–inorganic planar waveguide by sol–gel route
371
Preparation and Characterization of ZnO Thin Layers with Various Percentages of Gallium Impurities
372
Preparation and characterization of ZnO/polyethersulfone (PES) hybrid membranes Original Research Article
373
Preparation and characterization of ZnO/TiO2, SO42−/ZnO/TiO2 photocatalyst and their photocatalysis
374
Preparation and characterization of ZnO-deposited DBD plasma-treated PP packaging film with antibacterial activities
375
Preparation and characterization of ZnO–SiO2 thin films as highly efficient photocatalyst
376
Preparation and characterization of ZnO–TiO2 films obtained by sol-gel method
377
Preparation and characterization of ZnO–TiO2 nanocomposite for photocatalytic disinfection of bacteria and detoxification of cyanide under visible light
378
Preparation and characterization of ZnS based nano-crystalline particles for polymer light-emitting diodes
379
Preparation and characterization of ZnS/CdS bi-layer for CdTe solar cell application Original Research Article
380
Preparation and characterization of ZnS/poly(acrylamide-co-acrylic acid) dendritical nanocomposites by γ-irradiation
381
Preparation and characterization of ZnS:Fe/MX (M = Cd, Zn; X = S, Se) core–shell nanocrystals
382
Preparation and characterization of Zn–Se bilayer thin film structure
383
Preparation and characterization of ZnTe thin films by SILAR method
384
Preparation and characterization of Zr doped TiO2 nanotube arrays on the titanium sheet and their enhanced photocatalytic activity
385
Preparation and characterization of ZrB2/AlN multilayers by N+ beam assisted deposition
386
Preparation and characterization of ZrB2–SiC–Zr2Al4C5 composites by spark plasma sintering-reactive synthesis (SPS-RS) method
387
Preparation and characterization of ZrO2 porous nanosolid and its composite fluorescent materials
388
Preparation and characterization of ZrO2 thin film on sulfonated self-assembled monolayer of 3-mercaptopropyl trimethoxysilane
389
Preparation and characterization of ZrO2/PES hybrid ultrafiltration membrane with uniform ZrO2 nanoparticles Original Research Article
390
Preparation and characterization of ZrO2/Ti electrode for waste water purification system
391
Preparation and characterization of ZrO2:Sm amorphous thin films by solid state photochemical deposition method Original Research Article
392
Preparation and characterization of ZrO2–SiO2 binary films for planar optical waveguides
393
Preparation and characterization of ZrWMoO8 powders with different morphologies using hydrothermal method
394
Preparation and characterization of Z-shaped carbon nanotubes via decomposing magnesium acetate
395
Preparation and characterization of ZTA bioceramics with and without gradient in composition
396
Preparation and characterization of α-chitin from cicada sloughs
397
Preparation and characterization of α-chitin whisker-reinforced chitosan nanocomposite films with or without heat treatment
398
Preparation and characterization of α-chitin whisker-reinforced poly(vinyl alcohol) nanocomposite films with or without heat treatment
399
Preparation and characterization of α-cyclodextrin-containing membranes—application to the selective extraction of xylene isomers
400
Preparation and characterization of α-Fe nanowires located inside double wall carbon nanotubes
401
Preparation and characterization of α-Fe2O3–CeO2 composite
402
Preparation and characterization of α-FeOOH and α-Fe2O3 by sol–gel method
403
Preparation and characterization of α-galactosidase-loaded chitosan nanoparticles for use in foods
404
Preparation and Characterization of α-Tocopherol-Loaded Nano-Lipid Carriers: Effect of Lipid Type and Carrier Oil Content
405
Preparation and characterization of β-tricalcium phosphate co-doped with monovalent and divalent antibacterial metal ions
406
Preparation and Characterization of γ-Al2O3/Al Composite
407
Preparation and characterization of ω-functionalized polystyrene–magnetite nanocomposites
408
Preparation and characterization of low-dimensional nanostructures
409
Preparation and characterization of polymer/inorganic nanoparticle composites through electron irradiation
410
Preparation and characterization on mechanical and antibacterial properties of chitsoan/cellulose blends
411
Preparation and Characterization on Nano-Sized Barium Titanate Powder Doped with Lanthanum by Sol-Gel Process
412
Preparation and Characterization some New of Naproxen Drug Derivatives
413
Preparation and characterization superporous hydroxypropyl methylcellulose gel beads
414
Preparation and characterization superporous hydroxypropyl methylcellulose gel beads
415
Preparation and Characterization Upconversion Luminescence Material of Yttrium Aluminate Doped with Rare Earth
416
Preparation and characterization water-soluble inclusion complexes of imidacloprid-β-cyclodextrin polymer and their electrochemical behavior
417
Preparation and characterizations of a new PS/TiO2 hybrid membranes by sol–gel process
418
Preparation and characterizations of a novel deoxycholic acid–O-carboxymethylated chitosan–folic acid conjugates and self-aggregates
419
Preparation and characterizations of amorphous nanostructured SiC thin films by low energy pulsed laser deposition
420
Preparation and characterizations of asymmetric sulfonated polysulfone membranes by wet phase inversion method
421
Preparation and characterizations of Ce-Cu-O monolithic catalysts for ethyl acetate catalytic combustion
422
Preparation and characterizations of charged poly(vinyl butyral) hollow fiber ultrafiltration membranes with perfluorosulfonic acid as additive
423
Preparation and Characterizations of Chitosan/Citral Nanoemulsions and their Antimicrobial Activity
424
Preparation and characterizations of Cu2O/reduced graphene oxide nanocomposites with high photo-catalytic performances
425
Preparation and characterizations of CuO doped ZnO nanostructure for the photocatalytic degradation of 4chlorophenol under visible light
426
Preparation and characterizations of HDPE–EVA alloy/OMT nanocomposites/paraffin compounds as a shape stabilized phase change thermal energy storage material
427
Preparation and characterizations of highly transparent UV-curable ZnO-acrylic nanocomposites
428
Preparation and characterizations of nanoparticles from graphite via an electrochemically oxidizing method
429
Preparation and characterizations of novel zwitterionic membranes
430
Preparation and characterizations of Pickering emulsions stabilized by hydrophobic starch particles
431
Preparation and Characterizations of Poly(amic acid) Grafted Silica Nanoparticles.
432
Preparation and characterizations of poly(vinylidene fluoride)/oxidized multi-wall carbon nanotube membranes with bi-continuous structure by thermally induced phase separation method
433
Preparation and characterizations of solid/aqueous phases inclusion complex of 2,4-dinitroaniline with β-cyclodextrin
434
Preparation and characterizations of tetragonal barium titanate powders by hydrothermal method
435
Preparation and characterizations of ultrafine hexaganoal ferrite Co2Z powders
436
Preparation and characterizations of Zn2SiO4:Mn green phosphors
437
Preparation and charateristics of Nafion membrane coated with a PVdF copolymer/recast Nafion blend for direct methanol fuel cell
438
Preparation and Charaterizations of Zeolite - Filled Natural Rubber/Poly (vinyl alcohol) Semi-IPN Membranes
439
Preparation and Charge-Discharge Properties of a Novel Organosulfur Polymer, Poly(p-phenylene thiuret), for Battery Applications
440
Preparation and chemical properties of the skutterudites (Ce–Yb)yFe4−x(Co/Ni)xSb12
441
Preparation and chemical reduction of Pt(IV) chloride-GICS: Supported Pt vs Pt inclusion graphite compounds Original Research Article
442
Preparation and chemical stability of CaO–P2O5–Na2O–B2O3 porous glass ceramics
443
Preparation and chemical transformation of surfactant-templated hybrid phase containing [MoS4]2− anions
444
Preparation and chemiluminescent properties of perylene-containing polyimides as polymeric red fluorophores
445
Preparation and chemiresistive properties of nanostructured materials
446
Preparation and chiral activation of cinchonidine modified Pt nanoclusters deposited on an alumina support: Influence of catalyst nature on obtained enantiomeric excess in ethyl pyruvate hydrogenation at low pressures Original Research Article
447
Preparation and chiral recognition of a novel chiral stationary phase for high-performance liquid chromatography, based on mono(6A-N-allylamino-6A-deoxy)-perfunctionalized β-cyclodextrin and covalently bonded silica gel
448
Preparation and chromatographic evaluation of a cysteine-bonded zwitterionic hydrophilic interaction liquid chromatography stationary phase
449
Preparation and chromatographic evaluation of a novel phosphate ester-bonded stationary phase with complexation and hydrophobic interactions retention mechanism
450
Preparation and Chromatographic Evaluation of Columns for Reversed-Phase Liquid Chromatography
451
Preparation and CO conversion activity of ceria nanotubes by carbon nanotubes templating method
452
Preparation and coagulation performance of poly-ferric-aluminum-silicate-sulfate from fly ash
453
Preparation and colloidal behaviour of surface-modified EuF3
454
Preparation and colossal magnetoresistance in a trilayer La0.67Sr0.33MnO3/La0.75MnO3/La0.67Sr0.33MnO3 device by dc magnetron sputtering
455
Preparation and combustion behaviour of polymer/layered silicate nanocomposites based upon PE and EVA
456
Preparation and combustion properties of α-Fe2O3 coated Zr particles
457
Preparation and comparative characterization of keratin–chitosan and keratin–gelatin composite scaffolds for tissue engineering applications
458
PREPARATION AND COMPARATIVE EVALUATION OF DIFFERENT ADJUVANTED TOXOID VACCINES AGAINST ENTEROTOXAEMIA
459
Preparation and comparative evaluation of sustained release metoclopramide hydrochloride matrix tablets
460
Preparation and comparative evaluation of sustained release metoclopramide hydrochloride matrix tablets
461
Preparation and comparative testing of advanced diamond-like carbon foils for tandem accelerators and time-of-flight spectrometers
462
Preparation and comparative testing of advanced diamond-like carbon foils for tandem accelerators and time-of-flight spectrometers
463
Preparation and comparison of chitosan nanoparticles with different degrees of glutathione thiolation
464
Preparation and Comparison of Two Different Nanocomposite Kinds Based on MgZnAl-Layered Double Hydroxide for Simultaneous Removal of Cationic and Anionic Dyes
465
Preparation and comparison of various formulations of solid lipid nanoparticles (SLNs) containing essential oil of Zataria multiflora
466
Preparation and complexation ability of zwitterionic derivatives of cyclodextrins
467
Preparation and compressive strength of calcium phosphate based cement dispersed with polycrystalline ceria doped tetragonal zirconia
468
Preparation and compressive strength of calcium phosphate based cement dispersed with polycrystalline ceria doped tetragonal zirconia
469
Preparation and compressive strength of α-tricalcium phosphate based cement dispersed with ceramic particles
470
Preparation and condensation reactions of a new light-fluorous Mukaiyama reagent: reliable purification with fluorous solid phase extraction for esters and amides
471
Preparation and conductibility of silica gels composited with undecatungstochromoferrous heteropoly acid
472
Preparation and conductibility of solid high-proton conductor molybdovanadogermanic heteropoly acid
473
Preparation and conducting performance of LaNiO3/Ag film and its interface reaction
474
Preparation and conductivity of decatungstomolybdovanadogermanic acid polyethylene glycol (PEG) hybrid material
475
Preparation and conductivity of PEDOT encapsulated inside faujasites
476
Preparation and conductivity of polyvinyl alcohol (PVA) films composited with molybdotungstovanadogermanic heteropoly acid
477
Preparation and conductivity of PVA films composited with decatungstomolybdovanadogermanic heteropoly acid
478
Preparation and conductivity of solid high-proton conductor silica gels containing 12-tungstogermanic heteropoly acid
479
Preparation and conductivity of solid high-proton conductor silica gels containing 12-tungstogermanic heteropoly acid
480
Preparation and conductivity of ternary scandia-stabilised zirconia
481
Preparation and conductivity of ternary undecatungstoferroaluminic heteropoly acid
482
Preparation and conductivity of the composite polymer electrolytes based on poly[bis(methoxyethoxyethoxy)phosphazene], LiClO4 and α-Al2O3
483
Preparation and conductivity of vanadotungstogermanic heteropoly acid
484
Preparation and conductivity of Yb2O3–Y2O3 and Gd2O3–Y2O3 co-doped zirconia ceramics
485
Preparation and conformational analysis of C-glycosyl β2- and β/β2-peptides Original Research Article
486
Preparation and conformational study of CF3-containing enkephalin-derived oligopeptide
487
Preparation and construction smart material sensitive to physical stress
488
Preparation and control of functional nano-objects: Spheres, rods and rings based on hybrid materials
489
Preparation and conversion of chiral O-isopropylidene-protected 4-aminocyclohexenol to various key intermediates toward narcissus alkaloids
490
Preparation and copolymerization of a novel carbohydrate containing monomer
491
Preparation and corrosion assessment of electrodeposited Ni–SiC composite thin films
492
Preparation and corrosion behavior evaluation of amalgam/titania nano composite
493
Preparation and corrosion behavior of nanocrystalline iron gradient materials produced by powder processing
494
Preparation and corrosion behavior of Ni and Ni–graphene composite coatings
495
Preparation and corrosion behaviour of amorphous Ni-based alloy coatings
496
Preparation and corrosion resistance of cerium conversion coatings on AZ91D magnesium alloy by a cathodic electrochemical treatment
497
Preparation and corrosion resistance of electroless Ni-P/SiC functionally gradient coatings on AZ91D magnesium alloy
498
Preparation and corrosion resistance of MAO layer/Yb2SiO5 composite coating on Mg alloy
499
Preparation and corrosion resistance of MAO/Ni–P composite coat on Mg alloy
500
Preparation and crystal and molecular structure of 6-O-[(2S)-2,3-epoxypropyl]-1, 2:3,4-di-O-isopropylidene-α-d-galactopyranose. Pyranoid ring conformation in 1,2:3,4-di-O-isopropylidene galactopyranose and related systems
501
Preparation and crystal structure determination of adducts of copper(II) chloride with 3-aryl-1-(imino-pyridin-2-yl-methyl)-5-hydroxy-5-trifluoromethyl-4,5-dihydro-1H-pyrazoles
502
Preparation and Crystal Structure Determination of Zinc (II) Bromide Complexes at the Presence of Various Ligands
503
Preparation and crystal structure of a new bismuth chromate: Bi8(CrO4)O11
504
Preparation and crystal structure of a new bismuth vanadate, Bi3.33(VO4)2O2
505
Preparation and crystal structure of a new cesium iron niobium oxide: Cs3Fe0.44Nb5.56O16
506
Preparation and crystal structure of a new family of transition metal phospho-silicides
507
Preparation and Crystal Structure of a New Reduced Calcium Niobium Oxide: CaNb2O4
508
Preparation and crystal structure of a new tin titanate containing Sn2+; Sn2TiO4
509
Preparation and crystal structure of chromium silicon selenide containing a B12 icosahedron with a tunnel structure
510
Preparation and crystal structure of H-BaTa2O6-type K1.83Ba4.17Nb12.18O36 and dielectric properties of the related compounds
511
Preparation and crystal structure of layered niobium oxides: Rb(Mg0.34Nb1.66)O5 and K(Fe0.43Nb1.57)O5
512
Preparation and Crystal Structure of N,N΄-bis(2,4- dimethoxybenzylidene)-butane-1,4-diamine Monohydrate
513
Preparation and crystal structure of new potassium niobium oxides: K2M2Nb4O13 (M = Mg,Fe)
514
Preparation and crystal structure of quaternary chromium sulfide halide CrSBr0.67Cl0.331
515
Preparation and Crystal Structure of Re3O10
516
Preparation and crystal structure of Sr5TiNb4O17
517
Preparation and Crystal Structure of the Equiatomic Rare Earth Palladium Silicides NdPdSi, SmPdSi,ALPHA-GdPdSi, andALPHA-TbPdSi
518
Preparation and Crystal Structure of the Intermetallics La4Mo7Al51and La4W7Al51
519
Preparation and Crystal Structure of the Pseudo-Decagonal Approximant Mn3Ga5
520
Preparation and crystal structure of two novel cadmium (II)–trimesates, Cd(HTMA)(NC5H5)2 · 0.5CH3OH · 0.5DMF and Cd(HTMA) · 2H2O
521
Preparation and Crystal Structures of 4-(4-Pyridylthio)-1-methylpyridinium Salts: Assembly of a Donor–AcceptorType Molecule Containing a Sulfide Bridge
522
Preparation and Crystal Structures of a Series of Titanium(III) 9-BBN Hydroborate Complexes Containing Ti···H Agostic Interactions
523
Preparation and crystal structures of an ionic triple-hydrogen-bridged derivative of 9-BBN hydroborate zirconium(IV)
524
Preparation and Crystal Structures of Mg(NH3)2Cl2, Mg(NH3)2Br2, and Mg(NH3)2I2
525
Preparation and crystal structures of new schiff bases derived from 3, 3ʹ-dihydroxy-4, 4ʹ-(propane-1, 2-dieloxy)-dibenzaldehyde
526
Preparation and Crystal Structures of Ni(NH3)2Cl2 and of Two Modifications of Ni(NH3)2Br2 and Ni(NH3)2I2
527
Preparation and crystal structures of novel bis(maleodintriledithiolato) platinum(III) complexes
528
Preparation and crystal structures of the complexes (η5-C5H3TMS–CMe2–η5-C13H8)MCl2 and [3,6-ditButC13H6–SiMe2–NtBu]MCl2 (M=Hf, Zr or Ti): mechanistic aspects of the catalytic formation of a isotactic–syndiotactic stereoblock-type polypropylene
529
Preparation and crystal structures of trans-bis(imidato)bis(1,2-diphenylethylamine)copper(II) complexes (imidato=5,5-diphenylhydantoinato and succinimidato). Particular boundary cases of coordination geometry and monodentate ligand conformation.
530
Preparation and crystalline morphology of biodegradable starch/clay nanocomposites
531
Preparation and crystallization behavior of syndiotactic polystyrene–clay nanocomposites
532
Preparation and crystallization behaviour of PP/PP-g-MAH/Org-MMT nanocomposite
533
Preparation and crystallization of forsterite fibrous gels
534
Preparation and crystallization of glasses in the system tetrasilicic mica-fluorapatite-diopside
535
Preparation and crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 bulk metallic glass with wide supercooled liquid region
536
Preparation and crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 bulk metallic glass with wide supercooled liquid region
537
Preparation and crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 bulk metallic glass with wide supercooled liquid region
538
Preparation and crystallographic characterization of C60Cl24
539
Preparation and crystallographic properties of Sr7−x(Ca/Ba)xMn4O15
540
Preparation and cupric ion release behavior of Cu/LDPE porous composites with tunable pore morphology for intrauterine devices
541
Preparation and Curing Kinetics Investigation of Diglycidyl Ether of Bisphenol A/Liquid Crystalline Epoxy Resin Blends
542
Preparation and cyclic oxidation of gradient NiCrAlYRe coatings on Ni-based superalloys
543
Preparation and cyclic voltammetric dissolution of core–shell–shell Ag–Pt–Ag nanocubes and their comparison in oxygen reduction reaction in alkaline media
544
Preparation and Cycloaddition Reactions of Novel Heterocyclic Mesomeric Betaines
545
Preparation and cytocompatibility of Si-incorporated nanostructured TiO2 coating
546
Preparation and cytotoxic activity of poly(ethylene glycol)-modified poly(amidoamine) dendrimers bearing adriamycin
547
Preparation and Cytotoxic Evaluation of Magnetite (Fe3O4) Nanoparticles on Breast Cancer Cells and its Combinatory Effects with Doxorubicin used in Hyperthermia
548
Preparation and Cytotoxic Evaluation of PGV-1 Derivative, CCA-1.1, as a New Curcumin Analog with Improved-Physicochemical and Pharmacological Properties
549
Preparation and damping properties of fly ash filled epoxy composites
550
Preparation and decarboxylative rearrangement of (Z)-enyne esters
551
Preparation and degradation of highly conducting polyaniline doped with picric acid
552
Preparation and dehumidification performance of composite membrane with PVA/gelatin–silica hybrid skin layer
553
Preparation and dehydrogenation properties of two cobalt-based ammine borohydrides: CoCl3·3NH3/3LiBH4 and CoCl2·3NH3/2LiBH4
554
Preparation and Deposition the Spinel Ferrite (Cu-ZnFe2O4) On Al Substrates and Plasticizer Through TP to Study of The Magnetic Characters
555
Preparation and deprotection of 1,1-diacetates (acylals) using zirconium sulfophenyl phosphonate as catalyst
556
Preparation and desalination performance of multiwall carbon nanotubes
557
PREPARATION AND DESIGN OF E-CONTENT, RELYING ON THE LANGUAGE (TO SERVE PEOPLE WITH SPECIAL NEEDS)
558
Preparation and Designing a Checklist for Health Care Marketing Mix, with Medical Tourism Approach
559
Preparation and detailed NMR analyses of a series of oligo-α-carrageenans
560
Preparation and Determination of Drug-Polymer Interaction and In-vitro Release of Mefenamic Acid Microspheres Made of CelluloseAcetate Phthalate and/or Ethylcellulose Polymers
561
Preparation and Determination of the Characteristics of Hydrogel Membrane of Poly-Vinyl Alchol, Starch and Chitosan
562
Preparation and Diagnosis of Activated Carbon from Hydrothermally Carbonized Sucrose as an Adsorption for the Removal Methyl Red Dye from Aqueous Synthetic Solutions
563
Preparation and Diagnosis of Pyrimidines Derivatives by Conventional And Microwave Ways.
564
Preparation and diastereo- and enantioselective trifluorocrotylboration with (Z)-(B)-diisopinocampheyl(4,4,4-trifluorobut-2-en-1-yl)borane
565
Preparation and diastereomeric separation of an (S)- and (R)-1-(methoxycarbonyl)tridec-10-yl glucoside derivative, a precursor for a monosaccharide constituent of resin glycosides
566
Preparation and dielectric behaviors of thermoplastic and thermosetting polymer nanocomposite films containing BaTiO3 nanoparticles with different diameters
567
Preparation and dielectric properties by sol–gel derived PMN-PT powder and ceramic
568
Preparation and dielectric properties of (Sr1−xCax)Fe0.5Nb0.5O3; (x=0.0, 0.1, 0.2) ceramics
569
Preparation and dielectric properties of Ag1−xLixNbO3 (ALN) solid solutions ceramics
570
Preparation and dielectric properties of B2O3–Li2O-doped BaZr0.35Ti0.65O3 ceramics sintered at a low temperature
571
Preparation and dielectric properties of BaCu(B2O5)-doped SrTiO3-based ceramics for energy storage
572
Preparation and dielectric properties of barium iron niobate by molten-salt synthesis
573
Preparation and dielectric properties of barium strontium titanate glass-ceramics sintered from sol–gel-derived powders
574
Preparation and dielectric properties of B-doped SiC powders by combustion synthesis
575
Preparation and dielectric properties of bismuth-based dielectric/PTFE microwave composites
576
Preparation and dielectric properties of BST-Mg2TiO4 composite ceramics
577
Preparation and dielectric properties of cadmium substituted lithium ferrite using microwave-induced combustion
578
Preparation and dielectric properties of ceramics in the SrBi2(Ta1−xNbx)2O9 solid solution system
579
Preparation and dielectric properties of core–shell structural composites of poly(1H,1H,2H,2H-perfluorooctyl methacrylate)@BaTiO3 nanoparticles
580
Preparation and dielectric properties of dense and amorphous alumina film by sol–gel technology
581
Preparation and dielectric properties of Dy, Er-doped BaZr0.2Ti0.8O3 ceramics
582
Preparation and dielectric properties of polymer-derived SiCTi ceramics
583
Preparation and dielectric properties of semiconducting lanthanum-doped strontium titanate ceramics from titanyl citrate precursors
584
Preparation and dielectric properties of SiC nanowires self-sacrificially templated by carbonated bacterial cellulose
585
Preparation and dielectric properties of Sr(Ti0.95Zr0.05)O3 ceramics doped with CaOTiO2SiO2 (CTS)
586
Preparation and dielectric properties of Sr5LnSn3Nb7O30 (Ln = Nd, La) ceramics
587
Preparation and dielectric property of Ag–PVA nano-composite
588
Preparation and dielectric tunability of bismuth-based pyrochlore dielectric thick films on alumina substrates
589
Preparation and Diels–Alder reaction of carbosilane dendrimer with conjugated diene
590
Preparation and Diels-Alder reactions of new nickel phthalocyanines
591
Preparation and dispersion behavior of silylated graphite oxide intercalated by n-hexadecylamine
592
Preparation and dispersion of shelled carbon nanoshells
593
Preparation and dispersion properties of water-soluble polyethylene glycol-dimethyl 5-sulfoisophthalate sodium salt polyester surfactants
594
Preparation and dispersive behaviors of reduced charge smectite
595
Preparation and dispersive mechanism of highly dispersive ultrafine silver powder
596
Preparation and Double-Helix Icosahedra Structure of delta-Co2Zn15
597
Preparation and drug controlled-release of polyion complex micelles as drug delivery systems
598
Preparation and drug release behavior of temperature-responsive mesoporous carbons
599
Preparation and drug release behaviors of nimodipine-loaded poly(caprolactone)–poly(ethylene oxide)–polylactide amphiphilic copolymer nanoparticles
600
Preparation and drug release property of CO2 stimulus-sensitive poly(N, N-dimethylaminoethyl methacrylate)-b-polystyrene nanoparticles
601
Preparation and Drug-Delivery Properties of Metal-Organic Framework HKUST-1
602
PREPARATION AND DSC OF PHASE STABILIZED AMMONIUM NITRATE CRYSTALLIZED FROM ITS AQUEOUS SOLUTION CONTAINING POTASSIUM FLUORIDE
603
Preparation and dynamic deuterium gas loading of highly porous palladium bulks
604
Preparation and Easy-Cleaning Property of Rare Earth Composite Ceramic
605
Preparation and effects of Mg-doping on the electrochemical properties of spinel Li4Ti5O12 as anode material for lithium ion battery
606
Preparation and electrical behavior study of the ceramic interconnect La0.7Ca0.3CrO3−δ with CeO2-based electrolyte Ce0.8Sm0.2O1.9
607
Preparation and electrical characterisation of dodecanethiol monolayer protected silver nanoclusters
608
Preparation and electrical characterization of a silicone elastomer composite charged with multi-wall carbon nanotubes functionalized with 7-octenyltrichlorosilane
609
Preparation and electrical conductivities of oligothiophene radical-cation salts
610
Preparation and electrical conductivity of graphene/ultrahigh molecular weight polyethylene composites with a segregated structure Original Research Article
611
Preparation and electrical conductivity of novel vanadate borate glass system containing graphene oxide
612
Preparation and electrical properties of (1 − x)Ba(Fe0.5Nb0.5)O3–xBaTiO3 ceramics
613
Preparation and electrical properties of a pyrochlore-related Ce2Zr2O8−x phase
614
Preparation and electrical properties of Bi2Zn2/3Nb4/3O7 thin films deposited at room temperature for embedded capacitor applications
615
Preparation and electrical properties of bismuth layer-structured ceramic Bi3NbTiO9 solid solution
616
Preparation and electrical properties of Cr2O3 gate insulator embedded with Fe dot
617
Preparation and electrical properties of fine strontium titanate powder from titanium alkoxide in a strong alkaline solution
618
Preparation and electrical properties of fine strontium titanate powder from titanium alkoxide in a strong alkaline solution
619
Preparation and electrical properties of garnet-type Li6BaLa2Ta2O12 lithium solid electrolyte thin films prepared by pulsed laser deposition
620
Preparation and electrical properties of graphene nanosheet/Al2O3 composites Original Research Article
621
Preparation and electrical properties of highly (1 1 1) oriented antiferroelectric PLZST films by radio frequency magnetron sputtering Original Research Article
622
Preparation and Electrical Properties of Highly (111)-Oriented (Na0.5Bi0.5) TiO3 Thin Films by a Sol-Gel Process
623
Preparation and electrical properties of humidity sensing films of BaTiO3/polystrene sulfonic sodium
624
Preparation and electrical properties of La0.4Sr0.6Ni0.2Fe0.8O3 using a glycine nitrate process
625
Preparation and electrical properties of lithium–sulfur-composite polymer batteries
626
Preparation and electrical properties of multilayer ZnO varistors with water-based tape casting
627
Preparation and electrical properties of NaNbO3 ceramics synthesized by topochemical microcrystal conversion
628
Preparation and electrical properties of NASICON-type structured Li1.4Al0.4Ti1.6(PO4)3 glass-ceramics by the citric acid-assisted sol–gel method
629
Preparation and electrical properties of Ni0.6Mn2.4−xSnxO4 NTC ceramics
630
Preparation and electrical properties of semiconducting Ba3−xLaxCe3Ti5Nb5O30 (x = 0.5, 1.0 and 1.5) compounds
631
Preparation and electrical properties of sintered oxides composed of Mn1.5Co(0.25+X)Ni(1.25-X)O4 ( 05X50:75) with a cubic spinel structure
632
Preparation and electrical properties of Sm-doped Bi2Ti2O7 thin films prepared on Pt (111) substrates
633
Preparation and electrical properties of sol–gel derived (1−x)Pb(Sc1/2Nb1/2)O3−xPbTiO3 (x=0.6) thin films
634
Preparation and electrical properties of the novel TTP donors including the BETS unit
635
Preparation and electrical properties of xCaRuO3/(1 − x)CaTiO3 perovskite composites
636
Preparation and electrical properties of yttrium-doped strontium titanate with B-site deficiency
637
Preparation and electrical sensitive behavior of poly (N-vinylpyrrolidone-co-acrylic acid) hydrogel with flexible chain nature
638
Preparation and electrical–magnetic properties of polyaniline doped with ionic ferrocenesulfonic acid
639
Preparation and electroactive properties of a PVDF/nano-TiO2 composite film Review Article
640
Preparation and electroactivity of poly(methylmethacrylate-co-pyrrolylmethylstyrene)–g-polypyrrole
641
Preparation and electroactivity of polymer-functionalized graphene oxide-supported platinum nanoparticles catalysts
642
Preparation and electrocatalytic activities of platinum nanoclusters deposited on modified multi-walled carbon nanotubes supports Original Research Article
643
Preparation and electrocatalytic activity of Rh adlayers on Pt(1 0 0) electrodes: reduction of nitrous oxide
644
Preparation and electrocatalytic activity of tungsten carbide and titania nanocomposite
645
Preparation and electrocatalytic properties of osmium oxide/hexacyanoruthenate films modified electrodes for catecholamines and sulfur oxoanions
646
Preparation and electrocatalytic properties of the TBO/nafion chemically-modified electrodes
647
Preparation and electrochemical behavior of dense YSZ film for SOEC
648
Preparation and electrochemical behavior of sol–gel LiNi0.3Co0.70−xMxO2 (M = Mn, Al)
649
Preparation and electrochemical behavior of the CA/TiO2/Sb2O5 composite electrode modified with p-benzoquinone
650
Preparation and electrochemical behaviors of platinum nanocluster catalysts deposited on plasma-treated carbon nanotube supports
651
Preparation and electrochemical behaviour of dinuclear platinum complexes containing NCN ligands (NCN=[C6H3(Me2NCH2)2-2,6]−). The crystal structure of [C6H3(Me2NCH2)2-1,3-(CC)-5]2
652
Preparation and electrochemical behaviour of PPy–CdS composite films
653
Preparation and electrochemical capacitance of brown-millerite SrCoO2.5 as electrode materials for supercapacitor
654
Preparation and electrochemical capacitive performance of polyaniline nanofiber-graphene oxide hybrids by oil–water interfacial polymerization
655
Preparation and electrochemical capacitive performance of polyaniline nanofiber-graphene oxide hybrids by oil–water interfacial polymerization
656
Preparation and electrochemical characterisation of supporting SOFC–Ni–YZT anodes
657
Preparation and electrochemical characteristics of a new rechargeable Li/PAn[FeOCl(an)] cell
658
Preparation and electrochemical characteristics of a polyvinylpyrrolidone-stabilized Si/carbon composite nanofiber anode for a lithium ion battery
659
Preparation and electrochemical characteristics of electrodeposited acetaminophen on ruthenium oxide nanoparticles and its role as a sensor for simultaneous determination of ascorbic acid, dopamine and N-acetyl-l-cysteine
660
Preparation and electrochemical characteristics of LiNi1/3Mn1/3Co1/3O2 coated with metal oxides coating
661
Preparation and electrochemical characteristics of manganese dioxide/graphite nanoplatelet composites
662
Preparation and electrochemical characteristics of mesoporous carbon spheres for supercapacitors
663
Preparation and electrochemical characteristics of MgNi–FeB alloys
664
Preparation and electrochemical characteristics of N-enriched carbon foam
665
Preparation and electrochemical characteristics of quaternary Li-Mn-V-O spinel as the positive materials for rechargeable lithium batteries
666
Preparation and electrochemical characteristics of spherical spinel cathode powders via an ultrasonic spray pyrolysis process
667
Preparation and electrochemical characteristics of microemulsion-derived Li(Ni, Co)O2 nanopowders
668
Preparation and Electrochemical Characterization of a (beta)-Cyclodextrin-Based Chemically Modified Electrode
669
Preparation and Electrochemical Characterization of a (beta)-Cyclodextrin-Based Chemically Modified Electrode
670
Preparation and electrochemical characterization of a new nanosensor based on self-assembled monolayer of cysteamine functionalized with phosphate groups
671
Preparation and electrochemical characterization of cobalt-manganese oxide as electrode materials for electrochemical capacitors Original Research Article
672
Preparation and electrochemical characterization of electrospun, microporous membrane-based composite polymer electrolytes for lithium batteries
673
Preparation and electrochemical characterization of flower-like Li1.2Ni0.17Co0.17Mn0.5O2 microstructure cathode by electrospinning
674
Preparation and electrochemical characterization of lithium cobalt oxide nanoparticles by modified sol–gel method
675
Preparation and electrochemical characterization of nanocrystalline Li[Li0.12Ni0.32Mn0.56]O2 pyrolyzed from polyacrylate salts
676
Preparation and electrochemical characterization of NiO nanostructure-carbon nanowall composites grown on carbon cloth
677
Preparation and electrochemical characterization of polyaniline/multi-walled carbon nanotubes composites for supercapacitor
678
Preparation and electrochemical characterization of porous SWNT–PPy nanocomposite sheets for supercapacitor applications
679
Preparation and electrochemical characterization of spinel type Fe–Co3O4 thin film electrodes in alkaline medium
680
Preparation and electrochemical characterization of tin/graphite/silver composite as anode materials for lithium-ion batteries
681
Preparation and electrochemical characterization of Zn2SnO4 as anode materials for lithium ion batteries
682
Preparation and electrochemical characterizations of cation-exchange membranes with different functional groups
683
Preparation and electrochemical characterizations of MnO2-dispersed carbon aerogel as supercapacitor electrode material
684
Preparation and electrochemical characterizations of poly(3,4-dioxyethylenethiophene)/LiCoO2 composite cathode in lithium-ion battery
685
Preparation and electrochemical characterizations of poly(3,4-dioxyethylenethiophene)/LiCoO2–Ketjenblack composite cathode in lithium-ion battery
686
Preparation and electrochemical hydrogen storage of mesoporous carbons by degradation of polyethylene in supercritical water
687
Preparation and Electrochemical Hydrogen Storage of the Nanocrystalline LaMg12 Alloy with Ni Powders
688
Preparation and electrochemical investigation of a nano-structured material Ni2+/MgFe layered double hydroxide as a glucose biosensor
689
Preparation and electrochemical investigation of LiMn2 − xMexO4 (Me: Ni, Fe, and x = 0.5, 1) cathode materials for secondary lithium batteries
690
Preparation and electrochemical magnesium insertion behaviors of Mg0.5+y(MeyTi1−y)2(PO4)3 (Me = Cr, Fe)
691
Preparation and electrochemical performance of a CuO/graphene composite
692
Preparation and electrochemical performance of a graphene-wrapped carbon/sulphur composite cathode
693
Preparation and electrochemical performance of a graphene-wrapped carbon/sulphur composite cathode
694
Preparation and electrochemical performance of alpha-nickel hydroxide nanowire
695
Preparation and electrochemical performance of carbon foam by direct pyrolysis of cyanate ester resin
696
Preparation and electrochemical performance of carbon foam by direct pyrolysis of cyanate ester resin
697
Preparation and electrochemical performance of gel polymer electrolytes using tri(ethylene glycol) dimethacrylate
698
Preparation and electrochemical performance of highly dispersed Sn–Zn–O composite system
699
Preparation and electrochemical performance of Li4Ti5O12/graphitized carbon nanotubes composite
700
Preparation and electrochemical performance of novel ruthenium–manganese oxide electrode materials for electrochemical capacitors Original Research Article
701
Preparation and electrochemical performance of sulfur-alumina cathode material for lithium-sulfur batteries
702
Preparation and electrochemical performances of graphite oxide/polypyrrole composites
703
Preparation and electrochemical performances of PEDOT/sulfonic acid-functionalized graphene composite hydrogel
704
Preparation and electrochemical properties of a Li2CuO2–Li2NiO2 solid solution as a lithium-intercalation electrode
705
Preparation and electrochemical properties of a Sm2−xSrxNiO4 cathode for an IT-SOFC
706
Preparation and electrochemical properties of boron-doped mesoporous carbons
707
Preparation and electrochemical properties of carbon nanofibers derived from polybenzimidazole/polyimide precursor blends Original Research Article
708
Preparation and electrochemical properties of carbon-doped TiO2 nanotubes as an anode material for lithium-ion batteries
709
Preparation and electrochemical properties of cathode materials for lithium ion battery by aerosol process
710
Preparation and electrochemical properties of composite LaNix/Ni–S–Co alloy film
711
Preparation and electrochemical properties of Co–Si3N4 nanocomposites
712
Preparation and electrochemical properties of Cr(III)–Ti-based coatings on 6063 Al alloy
713
Preparation and electrochemical properties of high-voltage cathode materials, LiMyNi0.5−yMn1.5O4 (M=Fe, Cu, Al, Mg; y=0.0–0.4)
714
Preparation and electrochemical properties of Keggin-type phosphomolybdic anions in electrostaticly linked l-cysteine self-assembled monolayers
715
Preparation and electrochemical properties of La0.4Sr0.6FeO3 as negative electrode of Ni/MH batteries
716
Preparation and electrochemical properties of lamellar MnO2 for supercapacitors
717
Preparation and electrochemical properties of La–Mg–Ni-based La0.75Mg0.25Ni3.3Co0.5 multiphase hydrogen storage alloy as negative material of Ni/MH battery
718
Preparation and electrochemical properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 cathode materials for Li-ion batteries
719
Preparation and electrochemical properties of LiAlO2-coated Li(Ni1/3Mn1/3Co1/3)O2 for all-solid-state batteries
720
Preparation and electrochemical properties of LiNi1/3Co1/3Mn1/3O2–PPy composites cathode materials for lithium-ion battery
721
Preparation and electrochemical properties of Li-rich spinel-type lithium manganate coated LiMn2O4
722
Preparation and electrochemical properties of lithium–sulfur polymer batteries
723
Preparation and electrochemical properties of mesoporous Co3O4 crater-like microspheres as supercapacitor electrode materials
724
Preparation and electrochemical properties of modified electrodes with Keggin-type silicotungstates and PEDOT
725
Preparation and electrochemical properties of multiwalled carbon nanotubes–nickel oxide porous composite for supercapacitors
726
Preparation and electrochemical properties of nano-Si/C composites
727
Preparation and electrochemical properties of nickel oxide as a supercapacitor electrode material
728
Preparation and electrochemical properties of Ni–SDC thin films for IT-SOFC anode
729
Preparation and electrochemical properties of novel cyclic dinuclear acetylacetonato ruthenium complexes doubly bridged with sulfur and/or disulfur
730
Preparation and electrochemical properties of organic–inorganic hybrids with the use of alkylammonium or alkylviologen cations and polyoxometalate anions
731
Preparation and electrochemical properties of polyaniline nanofibers using ultrasonication
732
Preparation and electrochemical properties of polypyrrole/graphite oxide composites with various feed ratios of pyrrole to graphite oxide
733
Preparation and electrochemical properties of RuO2/polyaniline electrodes for supercapacitors
734
Preparation and electrochemical properties of SAM of alkanethiols functionalized with 2-aza[3]ferrocenophane on gold electrode
735
Preparation and electrochemical properties of some (Sc1-xTix)Ni alloys
736
Preparation and electrochemical properties of spinel LiFexCuyMn1.2O4 by ultrasonic spray pyrolysis
737
Preparation and electrochemical properties of Sr-doped Nd2NiO4 cathode materials for intermediate-temperature solid oxide fuel cells
738
Preparation and electrochemical properties of strontium doped Pr2NiO4 cathode materials for intermediate-temperature solid oxide fuel cells
739
Preparation and electrochemical properties of ultra-fine Mn–Ni–Cu oxides for supercapacitors
740
Preparation and electrochemical properties of vanadium pentoxide aerogel film derived at the ambient pressure
741
Preparation and electrochemical properties of Y-doped Li3V2(PO4)3 cathode materials for lithium batteries
742
Preparation and electrochemical properties of Zn-doped LiNi0.8Co0.2O2
743
Preparation and electrochemical properties of ZnO/conductive-ceramic nanocomposite as anode material for Ni/Zn rechargeable battery
744
Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries
745
Preparation and electrochemical/thermal properties of LiNi0.74Co0.26O2 cathode material
746
Preparation and electrochemiluminescent and photoluminescent properties of a graphene oxide colloid Original Research Article
747
Preparation and electrochemistry of one-dimensional nanostructured MnO2/PPy composite for electrochemical capacitor
748
Preparation and electrochemistry properties of trifunctional 1,9-dithiophenalenylium salt and its neutral radical with benzene spacer
749
Preparation and electrochromic properties of Li-doped MoO3 films fabricated by the peroxo sol–gel process
750
Preparation and electrochromic properties of spin self-assembled polyelectrolyte multilayer films composed of PEDOT:PSS and PAH
751
Preparation and electrochromic properties of tungsten oxide and iridium oxide porous films
752
Preparation and electrochromism of alkylammonium molybdate thin films
753
Preparation and electrode behavior of NdMgNi3.6Co0.4 hydrogen storage alloy
754
Preparation and electrode properties of composite cathodes based on Bi1 − xSrxFeO3 − δ with Perovskite-type structure
755
Preparation and electromagnetic properties of graphene-supported Ni0.8Zn0.2Ce0.06Fe1.94O4 nanocomposite
756
Preparation and electromagnetic properties of in-situ Ba0.8Sr0.2TiO3/YFeO3 composites
757
Preparation and electromagnetic properties of La-doped barium-ferrite/polythiophene composites
758
Preparation and electromagnetic properties of multiwalled carbon nanotubes/Ni composites by γ-irradiation technique
759
Preparation and electromagnetic properties of Polyaniline(polypyrrole)-BaFe12O19/Ni0.8Zn0.2Fe2O4 ferrite nanocomposites
760
Preparation and electromagnetic wave absorption properties of Fe-doped zinc oxide coated barium ferrite composites
761
Preparation and electromechanical properties of PZT/PGO thick films on alumina substrate
762
Preparation and electronic properties of Schottky devices utilizing an asymmetrically substituted metal-free phthalocyanine Langmuir-Blodgett film as barrier layers
763
Preparation and electronic state of graphite-like layered material BC6N
764
Preparation and electronic states of Na16Ba8Si136 clathrate
765
Preparation and electrophoretic response of poly(methyl methacrylate-co-methacrylic acid) coated TiO2 nanoparticles for electronic paper application
766
Preparation and electrophoretic response of poly(methyl methacrylate-co-methacrylic acid) coated TiO2 nanoparticles for electronic paper application
767
Preparation and electrophoretic separation of Bodipy-Fl-labeled glycosphingolipids
768
Preparation and electrorheological characteristics of uniform core/shell structural particles with different polar molecules shells
769
Preparation and electrorheological properties of polyquin(2,3-b)acridine-12,14(5,7)dione-based suspensions
770
Preparation and electrorheological properties of triethanolamine-modified TiO2
771
Preparation and Electrorheological Property of NaNO3-Doped Y2O3 Material
772
Preparation and Electrorheological Property of Y4O(OH)9(NO3)-NH4NO3 Materials
773
Preparation and electrorheology of new mesoporous polypyrrole/MCM-41 suspensions
774
Preparation and electrosorption desalination performance of activated carbon electrode with titania
775
Preparation and elevated temperature compressive properties of multi-walled carbon nanotube reinforced Ti composites
776
Preparation and emission property of scandia pressed cathode
777
Preparation and enantiomer separation behavior of selectively methylated β-cyclodextrin-bonded stationary phases for high performance chromatography Original Research Article
778
Preparation and enantiomer separation characteristics of chitosan/β-cyclodextrin composite membranes
779
Preparation and enantioseparation characteristics of a novel chiral stationary phase based on mono (6A-azido-6A-deoxy)-per(p-chlorophenylcarbamoylated) β-cyclodextrin
780
Preparation and encapsulation properties of double Pickering emulsions stabilized by quinoa starch granules
781
Preparation and energy-storage performance of PLZT antiferroelectric thick films via sol–gel method
782
Preparation and enhanced capacitance of core–shell polypyrrole/polyaniline composite electrode for supercapacitors
783
Preparation and Enhanced Electrochromic Property of Three-dimensional Ordered Mesostructured Mixed Tungsten–Titanium Oxides
784
Preparation and Enhanced Electrorheological Activity of TiO2 Doped with Chromium Ion
785
Preparation and enhanced photocatalytic activity of Pd–CuO/palygorskite nanocomposites
786
Preparation and enhanced photoluminescence property of ordered ZnO/TiO2 bottlebrush nanostructures
787
Preparation and enhanced stability of flexible supercapacitor prepared from Nafion/polyaniline nanofiber
788
Preparation and enhanced visible light-driven catalytic activity of ZnO microrods sensitized by porphyrin heteroaggregate
789
Preparation and Enhancement of ( Hydroxyapatite/Bioactive glass) Composite by Mg Nanowires for Dental and Bone Implants
790
Preparation and enzymatic activity of penicillin G acylase immobilized on core–shell porous glass beads
791
Preparation and enzymatic behavior of surfactant-enveloped enzymes for glycosynthesis in nonaqueous aprotic media
792
Preparation and enzymatic hydrolysis of nanoparticles made from single xyloglucan polysaccharide chain
793
Preparation and EPR Studies of Lithium Phthalocyanine Radical as an Oxymetric Probe
794
Preparation and ESR characterization of polyalkyl-s-indacenyl anion-radicals from polyalkyl-1,5-dilithio-s-indacenes
795
Preparation and ethanol sensing properties of the superstructure SnO2/ZnO composite via alcohol-assisted hydrothermal route
796
Preparation and Evaluation anticancer activity of D-glucosamine Nanoparticles on Metastatic cancer Model in vivo
797
Preparation and evaluation in vitro and in vivo of docetaxel loaded mixed micelles for oral administration
798
Preparation and evaluation of [166Ho] holmium-dimethyl diethylenetriaminepentaaceticacid (DMDTPA) as potential radiopharmaceutical for endovascular radiation therapy (EVRT)
799
Preparation and evaluation of 1,3-alternate 25,27-bis-(pentafluorobenzyloxy)-26,28-bis-(3-propyloxy)-calix[4]arene-bonded silica gel high performance liquid chromatography stationary phase
800
Preparation and evaluation of 1,3-diaminocyclopentane-linked dihydropyrimidinone derivatives as selective α1a-receptor antagonists
801
Preparation and evaluation of 1,6-hexanediol ethoxylate diacrylate-based alkyl methacrylate monolithic capillary column for separating small molecules
802
PREPARATION AND EVALUATION OF 5, 9-DIMETHYL-2-CYCLOPROPYL-2-DECANOL AS A PENETRATION ENHANCER FOR DRUGS THROUGH RAT SKIN
803
Preparation and evaluation of 67Ga-DOTA-Bombesin (7-14) as a tumor scintigraphic agent
804
Preparation and evaluation of 99mTc-DMSA lyophilized kit for renal imaging
805
Preparation and evaluation of a chiral stationary phase covalently bound with a chiral pseudo-18-crown-6 ether having a phenolic hydroxy group for enantiomer separation of amino compounds
806
Preparation and evaluation of a chiral stationary phase covalently bound with chiral pseudo-18-crown-6 ether having 1-phenyl-1,2-cyclohexanediol as a chiral unit
807
Preparation and Evaluation of a Herbal Mouthwash Containing Oak Husk of Quercus brantii and Zataria multiflora
808
Preparation and evaluation of a hydrolytically stable amide-embedded stationary phase
809
Preparation and evaluation of a kind of bacterial cellulose dry films with antibacterial properties
810
Preparation and evaluation of a large-volume radial flow monolithic column
811
Preparation and Evaluation of a Liposome Drug Delivery System in Cancer Treatment in vitro
812
Preparation and evaluation of a liquid sustained-release drug delivery system for theophylline using spray-drying technique
813
Preparation and evaluation of a liquid sustained-release drug delivery system for theophylline using spray-drying technique
814
Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography
815
Preparation and evaluation of a magnetite-doped activated carbon fiber for enhanced arsenic removal Original Research Article
816
Preparation and evaluation of a mastic gum Peel-off mask as a skin-refreshing product
817
Preparation and evaluation of a metallic foam catalyst for steam-CO2 reforming of methane in GTL-FPSO process
818
Preparation and evaluation of a molecularly imprinted sol–gel material for on-line solid-phase extraction coupled with high performance liquid chromatography for the determination of trace pentachlorophenol in water samples
819
Preparation and evaluation of a monolithic molecularly imprinted polymer for the chiral separation of neurotransmitters and their analogues by capillary electrochromatography
820
Preparation and evaluation of a multi-component catalyst by using a co-sputtering system for anodic oxidation of ethanol
821
Preparation and evaluation of a neutral methacrylate-based monolithic column for hydrophilic interaction stationary phase by pressurized capillary electrochromatography
822
Preparation and evaluation of a new radiopharmaceutical for radiosynovectomy, 111Ag-labelled hydroxyapatite (HA) particles
823
Preparation and evaluation of a novel Fe–Mn binary oxide adsorbent for effective arsenite removal
824
Preparation and evaluation of a novel glass-ionomer cement with antibacterial functions
825
Preparation and Evaluation of A Novel Liposomal Nano-Formulation in Metastatic Cancer Treatment Studies
826
Preparation and evaluation of a novel monolithic column containing double octadecyl chains for reverse-phase micro high performance liquid chromatography
827
Preparation and evaluation of a novel self-humidifying Pt/PFSA composite membrane for PEM fuel cell
828
Preparation and evaluation of a novel star-shaped polyacid-constructed dental glass–ionomer system
829
Preparation and evaluation of a poly(N-vinylcarbazole)–Fe3O4 (PNVC–Fe3O4) nanocomposite
830
Preparation and evaluation of a polycaprolactone/chitosan/propolis fibrous nanocomposite scaffold as a tissue engineering skin substitute
831
Preparation and evaluation of a polymer-supported Mukaiyama reagent
832
Preparation and evaluation of a porous monolithic capillary column for microextraction of estrogens from urine and milk samples online coupled to high-performance liquid chromatography
833
Preparation and evaluation of a proton exchange membrane based on crosslinkable sulfonated poly(ether ether ketone)s
834
Preparation and evaluation of a proton exchange membrane based on oxidation and water stable sulfonated polyimides
835
Preparation and evaluation of a silica-based 1-alkyl-3-(propyl-3-sulfonate) imidazolium zwitterionic stationary phase for high-performance liquid chromatography
836
Preparation and evaluation of a thermosensitive liposomal hydrogel for sustained delivery of danofloxacin using mesoporous silica nanoparticles
837
Preparation and Evaluation of Aceclofenac Topical Microemulsion
838
Preparation and evaluation of activated carbon with different polycondensed phosphorus oxyacids (H3PO4, H4P2O7, H6P4O13 and C6H18O24P6) activation employing mushroom roots as precursor
839
Preparation and evaluation of activated carbon with different polycondensed phosphorus oxyacids (H3PO4, H4P2O7, H6P4O13 and C6H18O24P6) activation employing mushroom roots as precursor
840
Preparation and Evaluation of Acyclovir Liposomes by Two Techniques: A Comparative Study
841
Preparation and evaluation of aerosol composite particles by electrostatic process
842
Preparation and evaluation of Al2O3 plastic forming feedstock with partially water soluble polymer as a binder
843
Preparation and evaluation of an animal feed byproduct produced by solid-state fermentation of apple pomace
844
Preparation and evaluation of an imidazole-coated capillary column for the electrophoretic separation of aromatic acids
845
Preparation and evaluation of an immunoaffinity sorbent for the analysis of opioid peptides by on-line immunoaffinity solid-phase extraction capillary electrophoresis–mass spectrometry Original Research Article
846
Preparation and evaluation of an immunoaffinity sorbent with Fab′ antibody fragments for the analysis of opioid peptides by on-line immunoaffinity solid-phase extraction capillary electrophoresis–mass spectrometry Original Research Article
847
Preparation and evaluation of anion exchange open tubular column
848
Preparation and evaluation of bipyridyl-tagged reagents and scavengers
849
Preparation and Evaluation of Blood Compatibility of Novel Epoxy-Modified Polyurethanes
850
Preparation and evaluation of brownies soft biscuit from non-wheat flour using date molasses
851
Preparation and evaluation of C10-cationic latex particle coated open-tubular column for capillary electrochromatography
852
Preparation and evaluation of Ca3−xBixCo4O9−δ (0< x ≤ 0.5) as novel cathodes for intermediate temperature-solid oxide fuel cells
853
Preparation and evaluation of calix[4]arene-capped β-cyclodextrin-bonded silica particles as chiral stationary phase for high-performance liquid chromatography
854
Preparation and Evaluation of Carbamazepine Particles Loaded in Mucoadhesive Film for Treatment of Trigeminal Neuralgia
855
Preparation and evaluation of carbon coated alumina as a high surface area packing material for high performance liquid chromatography
856
PREPARATION AND EVALUATION OF CELECOXIB TRANSDERMAL PATCHES
857
Preparation and Evaluation of Ceramic Materials in Wastewater Treatment
858
Preparation and evaluation of chitosan nanoparticles containing Diphtheria toxoid as new carriers for nasal vaccine delivery in mice.
859
Preparation and evaluation of chitosan nanoparticles containing Diphtheria toxoid as new carriers for nasal vaccine delivery in mice.
860
Preparation and Evaluation of Chitosan-Alginate Microparticles for Luteolin Entrapment
861
Preparation and evaluation of chitosan–hydrophobic silica composite microspheres: Role of hydrophobic silica in modifying their properties
862
Preparation and evaluation of cholesteryl PAMAM dendrimers as nano delivery agents for antisense oligonucleotides
863
Preparation and evaluation of clove oil in emu oil self-emulsion for hair conditioning and hair loss prevention
864
Preparation and evaluation of Co/Al2O3 catalysts in the production of hydrogen from thermo-catalytic decomposition of methane: Influence of operating conditions on catalyst performance
865
Preparation and evaluation of composites from montmorillonite and some heterocyclic polymers: 3. a water dispersible nanocomposite from pyrrole-montmorillonite polymerization system
866
Preparation and evaluation of controlled released implant containing mesoporous selenium nanoparticles loaded with curcumin in rats with spinal cord injury
867
Preparation and evaluation of copolymeric micelles with high paclitaxel contents and sustained drug release
868
Preparation and Evaluation of Cucumeropsis mannii Naud. Seed Oil Metallic Soaps as Driers in Gloss Paint
869
Preparation and Evaluation of Curcumin Nano Emulsion to Inhibit TC-1 Cell Growth
870
Preparation and Evaluation of Cyproterone Acetate Liposome for Topical Drug Delivery
871
PREPARATION AND EVALUATION OF DICLOFENAC SODIUM– CELLULOSE ACETATE MICROCAPSULES USING SOLVENT EVAPORATION TECHNIQUE
872
Preparation and Evaluation of Diphtheria Toxoid-Containing Microspheres
873
Preparation and Evaluation of Diphtheria Toxoid-Containing Microspheres
874
Preparation and evaluation of doped ceria interlayer on supported stabilized zirconia electrolyte SOFCs by wet ceramic processes
875
Preparation and evaluation of electrodeposited platinum nanoparticles on in situ carbon nanotubes grown carbon paper for proton exchange membrane fuel cells
876
Preparation and evaluation of electrospun nanofibers containing pectin and time-dependent polymers aimed for colonic drug delivery of celecoxib
877
Preparation and Evaluation of Epoxy-Clay Nanocomposite Coatings for Corrosion Protection
878
Preparation and Evaluation of Etodolac Nanoemulsion
879
Preparation and Evaluation of Eudragit® L100 Nanoparticles Loaded Impregnated with KT Tromethamine Loaded PVA -HEC Insertions for Ophthalmic Drug Delivery
880
Preparation and evaluation of flat membranes for phenols separation Original Research Article
881
Preparation and Evaluation of Fluorescein Isothiocyanate-Conjugated Immunoglobulins for the detection of Avian Encephalomyelitis Virus
882
Preparation and Evaluation of Fluorescein Isothiocyanate-Conjugated Polyclonal Antibodies for Rapid Detection of Duck Viral Enteritis (Duck Plague)
883
Preparation and Evaluation of Glibenclamide-Loaded Biodegradable Nanoparticles
884
Preparation and evaluation of graphene-coated solid-phase microextraction fiber Original Research Article
885
Preparation and evaluation of heparin-immobilized poly (lactic acid) (PLA) membrane for hemodialysis
886
Preparation and Evaluation of Herbal Formulation Using Natural Extract
887
Preparation and Evaluation of High Nutrition Value Crackers Enriched With Some Leafy Vegetables
888
Preparation and evaluation of hollow molecular imprinted polymer for adsorption of dibenzothiophene
889
Preparation and evaluation of hydrophilic C18 monolithic sorbents for enhanced polar compound retention in liquid chromatography and solid phase extraction
890
Preparation and evaluation of hydrophobically modified core shell calcium carbonate structure by different capping agents
891
Preparation and evaluation of hydrotreating catalysts based on activated carbon derived from oil sand petroleum coke Original Research Article
892
Preparation and evaluation of hydroxylated poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolithic capillary for in-tube solid-phase microextraction coupled to high-performance liquid chromatography
893
preparation and evaluation of imatinib loaded transfersomal gel for the treatment of rheumatoid arthritis
894
Preparation and evaluation of inhalable itraconazole chitosan based polymeric micelles
895
Preparation and evaluation of ionic liquid-calixarene solid-phase microextraction fibres for the determination of triazines in fruit and vegetable samples
896
Preparation and evaluation of lactose-modified monoliths for the adsorption and decontamination of plant toxins and lectins Original Research Article
897
Preparation and evaluation of LaNiO3 thin film electrode with chemical solution deposition
898
Preparation and evaluation of lignosulfonates as a dispersant for gypsum paste from acid hydrolysis lignin
899
Preparation and evaluation of lipid vesicles of camptothecin as targeted drug delivery system
900
PREPARATION AND EVALUATION OF LOCAL MEDIUM FOR CULTURE AND GROWTH OF Trichomonas vaginalis ISOLATED FROM PATIENTS IN MOSUL, IRAQ
901
Preparation and evaluation of matrix containing lidocaine and prilocaine for using in transdermal films
902
Preparation and evaluation of mechanochemically fabricated LSM/ScSZ composite materials for SOFC cathodes
903
Preparation and evaluation of mesoporous cellular foams coating of solid-phase microextraction fibers by determination of tetrabromobisphenol A, tetrabromobisphenol S and related compounds Original Research Article
904
Preparation and evaluation of microporous organogel scaffolds for cell viability and proliferation
905
Preparation and evaluation of minoxidil foamable emu oil emulsion
906
Preparation and Evaluation of Mixed-Ligand Complexes of Cu (II) and Co (II) with Amodiaquine Hydrochloride and Sulphamethazine
907
Preparation and evaluation of molecularly imprinted ionic liquids polymer as sorbent for on-line solid-phase extraction of chlorsulfuron in environmental water samples
908
Preparation and evaluation of molecularly imprinted polymer liquid chromatography column for the separation of Cathine enantiomers
909
Preparation and evaluation of molecularly imprinted polymer liquid chromatography column for the separation of Cathine enantiomers
910
Preparation and evaluation of molecularly imprinted polymeric microspheres by aqueous suspension polymerization for use as a high-performance liquid chromatography stationary phase
911
Preparation and evaluation of molecularly imprinted polymeric microspheres by aqueous suspension polymerization for use as a high-performance liquid chromatography stationary phase Original Research Article
912
Preparation and evaluation of molecularly imprinted solid-phase microextraction fibers for selective extraction of bisphenol A in complex samples
913
Preparation and evaluation of molecularly imprinted solid-phase micro-extraction fibers for selective extraction of phthalates in an aqueous sample Original Research Article
914
Preparation and evaluation of molecularly-defined collagen–elastin–glycosaminoglycan scaffolds for tissue engineering
915
Preparation and Evaluation of Mucoadhesive Beads/Discs of Alginate and Algino-Pectinate of Piroxicam for Colon-Specific Drug Delivery Via Oral Route
916
Preparation and evaluation of nanoparticles composed of thiolated methylated pyridinyl chitosan as a new strategy for bucal drug delivery of insulin
917
Preparation and evaluation of nanoparticles of gum cordia, an anionic polysaccharide for ophthalmic delivery
918
Preparation and evaluation of new composites as anodes for intermediate-temperature solid oxide fuel cells
919
Preparation and evaluation of new l-canavanine derivatives as nitric oxide synthase inhibitors
920
Preparation and evaluation of nickelmesogen for micropacked gas chromatography
921
Preparation and evaluation of nitrogen-terminated silicon nanoparticles: laser annealing effect
922
Preparation and evaluation of n-octadecylphosphonic acid-modified magnesia–zirconia stationary phases for reversed-phase liquid chromatography Original Research Article
923
Preparation and evaluation of non-bonded hyperbranched polymer-coated columns for capillary electrophoresis
924
Preparation and evaluation of novel amphiphilic glycopeptide block copolymers as carriers for controlled drug release
925
Preparation and evaluation of novel chiral stationary phases covalently bound with chiral pseudo-18-crown-6 ethers
926
Preparation and evaluation of novel stationary phases for improved chromatographic purification of pneumocandin B0
927
Preparation and evaluation of o/w type emulsions containing antitumor prostaglandin
928
Preparation and evaluation of o/w type emulsions containing antitumor prostaglandin
929
Preparation and Evaluation of Oleogels Incorporated with Moringa oleifera Leaves Extract in Biscuits Production
930
Preparation and evaluation of orange peel cellulose adsorbents for effective removal of cadmium, zinc, cobalt and nickel
931
Preparation and Evaluation of Orodispersible Tablets Containing Hydroxylbutyl-β-Cyclodextrin-Simvastatin Solid Dispersion
932
PREPARATION AND EVALUATION OF OXYTETRACYCLINE HYDROCHLORIDE MICROBEADS FOR DELAYED RELEASE
933
Preparation and evaluation of packed capillary columns for the separation of nucleic acids by ion-pair reversed-phase high-performance liquid chromatography
934
Preparation and evaluation of PCL-PEG-PCL micelles as potential nanocarriers for ocular delivery of dexamethasone
935
Preparation and evaluation of pellets using acacia and tragacanth by extrusion-spheronization
936
Preparation and Evaluation of Physicochemical Properties of the Doxepin Mucoadhesive Gel
937
Preparation and evaluation of poly (caprolactone fumarate) nanoparticles containing doxorubicin HCl
938
Preparation and Evaluation of Poly (ε-caprolactone) Nanoparticles-in- Microparticles by W/O/W Emulsion Method
939
Preparation and evaluation of poly(4-vinylphenylboronic acid-co-pentaerythritol triacrylate) monolithic column for capillary liquid chromatography of small molecules and proteins
940
Preparation and evaluation of poly(polyethylene glycol methyl ether acrylate-co-polyethylene glycol diacrylate) monolith for protein analysis
941
Preparation and evaluation of polymer/clay nanocomposite surface treatments for concrete durability enhancement
942
Preparation and evaluation of polymer-coated adsorbents for the expanded bed recovery of protein products from particulate feedstocks
943
Preparation and evaluation of polysaccharide sulfates for inhibiting Helicobacter pylori adhesion
944
Preparation and Evaluation of PolyVinyl Alcohol Derivative as Antimicrobial and Antifungal Agents
945
Preparation and Evaluation of Potassium Ferrate as an Oxidant and Coagulant for Potable Water Treatment
946
Preparation and evaluation of propranolol molecularly imprinted solid-phase microextraction fiber for trace analysis of β-blockers in urine and plasma samples
947
Preparation and evaluation of psychometric quality of shyness questionnaire for students of Universities of Isfahan province
948
Preparation and Evaluation of Ribonuclease-Resistant Viral HIV RNA Standards Based on Armored RNA Technology
949
Preparation and Evaluation of Rifampicin and Co-trimoxazoleloaded Nanocarrier against Brucella melitensis Infection
950
Preparation and Evaluation of Samarium (III) Phosphate [153Sm] Colloid (SMPC) for Possible Therapeutic Use
951
Preparation and evaluation of solid-phase microextraction fiber based on molecularly imprinted polymers for trace analysis of tetracyclines in complicated samples
952
Preparation and evaluation of solid-phase microextraction fiber based on nano-structured copolymer of aniline and m-amino benzoic acid coating for the analysis of fatty acids in zooplanktons
953
Preparation and evaluation of solid-phase microextraction fibers based on monolithic molecularly imprinted polymers for selective extraction of diacetylmorphine and analogous compounds
954
Preparation and evaluation of solid-phase microextraction fibres based on functionalized latex nanoparticle coatings for trace analysis of inorganic anions
955
Preparation and evaluation of some newly liquid crystal as antioxidant for base stocks
956
Preparation and evaluation of spherical Ca-deficient hydroxyapatite granules with controlled surface microstructure as drug carriers
957
Preparation and evaluation of stable coating for capillary electrophoresis using coupled chitosan as coated modifier
958
Preparation and Evaluation of Sustained Release Matrix Tablets of Tramadol Hydrochloride Using Glyceryl Palmitostearate
959
Preparation and evaluation of sustained release microballoons of propranolol
960
Preparation and Evaluation of the Antibacterial Effect of Chitosan Nanoparticles Containing Ginger Extract Tailored by Central Composite Design
961
Preparation and Evaluation of the Antibacterial Effect of Magnetic Nanoparticles Containing Gentamicin: A Preliminary In vitro Study
962
Preparation and evaluation of the barrier properties of cellophane membranes modified with fatty acids
963
Preparation and evaluation of the clinical efficacy and safety of tomato lotion containing lycopene
964
Preparation and evaluation of the exotoxin A nano-gold conjugate as a vaccine candidate for Pseudomonas aeruginosa infections
965
Preparation and Evaluation of the Hypocholesterolemic Effect of Fermented Formula
966
Preparation and evaluation of the influence of modified fiber flour wood on the properties of the fresh condition of cement‑based mortars
967
Preparation and Evaluation of the Microstructure and Properties of Natural Rubber/Sodiummontmorillonite Nanocomposites
968
Preparation and evaluation of the mixtures of sulfonate and phenate as lube oil additives
969
Preparation and evaluation of thermo-reversible copolymer hydrogels containing chitosan and hyaluronic acid as injectable cell carriers
970
Preparation and evaluation of thin diamond-like carbon foils for heavy-ion tandem accelerators and time-of-flight spectrometers
971
Preparation and evaluation of thin diamond-like carbon foils for heavy-ion tandem accelerators and time-of-flight spectrometers
972
Preparation and evaluation of tobacco seed oil-modified alkyd resins
973
Preparation and Evaluation of Tretinoin Microemulsion Based on Pseudo-Ternary Phase Diagram
974
PREPARATION AND EVALUATION OF TWO SPECIAL FOODS IN RATS WITH LIVER CIRRHOSIS
975
Preparation and evaluation of uniformly sized solid lipid microcapsules using membrane emulsification
976
Preparation and evaluation of veterinary 20% injectable solution of tylosin
977
Preparation and evaluation of w/o/w type emulsions containing vancomycin
978
Preparation and evaluation of w/o/w type emulsions containing vancomycin
979
Preparation and evaluation of warfarin-β-cyclodextrin loaded chitosan nanoparticles for transdermal delivery
980
Preparation and evaluation of zirconia microspheres as inorganic exchanger in adsorption of copper and nickel ions and as catalyst in hydrogen production from bioethanol
981
Preparation and evaluation of zirconia-coated silica monolith for capillary electrochromatography
982
Preparation and examination of carbon- and binder-free electrodes used in lithium-ion cells
983
Preparation and examination of monolithic in-needle extraction (MINE) device for the direct analysis of liquid samples Original Research Article
984
Preparation and excellent microwave absorption property of three component nanocomposites: Polyaniline-reduced graphene oxide-Co3O4 nanoparticles
985
Preparation and experimental characterization of glass–alumina functionally graded materials
986
Preparation and experiments for a novel kind of foundry core binder made from modified potato starch
987
Preparation and Expression of M2 Gene Plasmid DNA for Potential use in Influenza A Vaccine Production
988
Preparation and Ex-vivo Ocular delivery of Thermo-responsible pluronic F- 127 hydrogel containing Propranolol hydrochlorideloaded Liposomes
989
Preparation and ferroelectric phase transition studies of nanocrystalline BaTiO3
990
Preparation and ferroelectric properties of (Na0.5Bi0.5)0.94Ba0.06TiO3 thin films deposited on Pt electrodes using LaNiO3 as buffer layer
991
Preparation and ferroelectric properties of barium-ion-doped strontium bismuth tantalate thin films Original Research Article
992
Preparation and ferroelectric properties of PZT fibers
993
Preparation and field electron emission of microcrystalline diamond deposited on a porous silicon substrate
994
Preparation and field emission properties of carbon nanotubes cold cathode using melting Ag nano-particles as binder
995
Preparation and field emission properties of Er-decorated multiwalled carbon nanotubes Original Research Article
996
Preparation and filtration testing of diatomite filtering layer by acid leaching
997
Preparation and flame resistance properties of revolutionary self-extinguishing epoxy nanocomposites based on layered double hydroxides
998
Preparation and flammability of high density polyethylene/paraffin/organophilic montmorillonite hybrids as a form stable phase change material
999
Preparation and flammability properties of intumescent flame retardant-functionalized layered double hydroxides/polymethyl methacrylate nanocomposites
1000
Preparation and flow characteristic of a novel phase change fluid for latent heat transfer