<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Thermal modeling of strip across the transfer table in the hot rolling process
2
Thermal modeling of subducted plates: tear and hotspot at the Kamchatka corner
3
Thermal modeling of the Clear Lake magmatic-hydrothermal system, California, USA
4
Thermal modeling of the forced convection Sandwich Greenhouse drying system for rubber sheets
5
Thermal modeling of the metal cutting process — Part II: temperature rise distribution due to frictional heat source at the tool–chip interface
6
Thermal modeling of the metal cutting process — Part II: temperature rise distribution due to frictional heat source at the tool–chip interface
7
Thermal modeling of the metal cutting process — Part II: temperature rise distribution due to frictional heat source at the tool–chip interface
8
Thermal modeling of the metal cutting process — Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source
9
Thermal modeling of the metal cutting process — Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source
10
Thermal modeling of the metal cutting process — Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source
11
Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source
12
Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source
13
Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source
14
Thermal modeling of the UHP Maksyutov Complex in the south Urals
15
Thermal modeling of vacuum web coating
16
Thermal modeling of various thermal barrier coatings in a high heat flux rocket engine
17
Thermal modeling of W rod armor
18
Thermal modelling for electrical machines fed with low voltage: First approach of a reliability model Original Research Article
19
Thermal modelling of a building with an integrated ventilated PV façade
20
Thermal modelling of a double condensing chamber solar still: an experimental validation
21
Thermal modelling of a photovoltaic module under variable free convection conditions
22
Thermal Modelling of a Solar Air Heater for All Over the Year of Yazd Province
23
Thermal modelling of an axial flux permanent magnet machine
24
Thermal modelling of end milling
25
Thermal modelling of large scale exploitation of ground source energy in urban aquifers as a resource management tool
26
Thermal modelling of laser welding and related processes: a literature review
27
Thermal modelling of the cathode in air-breathing PEM fuel cells
28
Thermal modelling of the Laramide orogeny: testing the flat-slab subduction hypothesis
29
Thermal modelling of the Larderello geothermal field (Tuscany, Italy)
30
Thermal modelling of the lemon-bore hydrodynamic bearing
31
Thermal modelling of the multi-stage heating system with variable boundary conditions in the wafer based precision glass moulding process
32
Thermal models for bobbin tool friction stir welding
33
Thermal models of dyke intrusion during development of continent–ocean transition
34
Thermal models of railroad wheels and bearings
35
Thermal modes of bimolecular exothermic reactions: Concentration limits of ignition
36
Thermal modes of monomolecular exothermic reactions: Two-dimensional model
37
Thermal modification of bottomonium spectra from QCD sum rules with the maximum entropy method
38
Thermal modification of collagen
39
Thermal modification of layer-by-layer assembled gold nanoparticle films
40
Thermal modified Kaolinite as useful material for separation and preconcentration of trace amounts of manganese ions
41
Thermal modulation of the monomer/excimer fluorescence for bispyrene molecules through the gel–solution transition of an organogel: A thermo-driven molecular fluorescence switch
42
Thermal molecular motion at surface of atactic polypropylene films
43
Thermal molecule and atom test of the modified special relativity theory
44
Thermal monitoring and indoor temperature predictions in a passive solar building in an arid environment
45
Thermal monitoring for control of adsorptive based clean-up in water treatment
46
Thermal monitoring of phenoxyacid herbicide adsoprtion on granular activated carbon
47
Thermal mud-pack as an anti-inflammatory treatment
48
Thermal muds: Perspectives of innovations
49
Thermal negativity in a two qubit XXX and XX spin chain model in an external magnetic field
50
Thermal neutron absorption cross section and clay mineral content for Miocene Carpathian samples
51
Thermal neutron capture cross-section measurements of 243Am and 242Pu using the new mini-INCA - and -spectroscopy station
52
Thermal neutron capture cross-section measurements of 243Am and 242Pu using the new mini-INCA - and -spectroscopy station
53
Thermal neutron capture cross-section of 48Ti, 51V, 50,52,53Cr and 58,60,62,64Ni
54
Thermal neutron cross sections for moderator materials: comparison of a synthetic scattering function and NJOY results
55
Thermal neutron cross-section and resonance integral for 164Dy(n,γ)165Dy reaction
56
Thermal neutron cross-section and resonance integral for 164Dy(n,γ)165Dy reaction
57
Thermal neutron cross-sections of magnesium
58
Thermal neutron damage in DMILL bipolar transistors
59
Thermal neutron damage in DMILL bipolar transistors
60
Thermal neutron detection at outer electrode surfaces of composite polycrystalline B, BN, B4C and LiF through air ionization
61
Thermal neutron detection at outer electrode surfaces of composite polycrystalline B, BN, B4C and LiF through air ionization
62
Thermal neutron detection using pyroelectric ceramics together with boron converters
63
Thermal neutron detection with cadmium1−x zincx telluride semiconductor detectors
64
Thermal neutron detection with cadmium1−x zincx telluride semiconductor detectors
65
Thermal neutron detection with Ce3+ doped LiCaAlF6 single crystals
66
Thermal neutron detection with Ce3+ doped LiCaAlF6 single crystals
67
Thermal neutron detection with pyrolytic boron nitride
68
Thermal neutron detection with pyrolytic boron nitride
69
Thermal neutron detectors based on complex oxide crystals
70
Thermal neutron detectors based on complex oxide crystals
71
Thermal neutron diffusion cooling in wet quartz: (Monte Carlo simulations of the pulsed neutron experiments)
72
Thermal Neutron Diffusion in an Array of Plates
73
Thermal neutron fluence from ultra low-level γ-ray spectrometry of spoons activated during the JCO criticality accident at Tokai-mura in 1999
74
Thermal neutron flux mapping in a head phantom
75
Thermal neutron flux mapping in a head phantom
76
Thermal neutron flux measurements in the STAR experimental hall
77
Thermal neutron flux measurements in the STAR experimental hall
78
Thermal neutron imaging with CsBr storage phosphors
79
Thermal neutron imaging with CsBr storage phosphors
80
Thermal neutron imaging with rare-earth-ion-doped LiCaAlF6 scintillators and a sealed 252Cf source
81
Thermal neutron imaging with rare-earth-ion-doped LiCaAlF6 scintillators and a sealed 252Cf source
82
Thermal neutron measurements of the Rhode Island Nuclear Science Center reactor after conversion to a compact low enriched uranium core
83
Thermal neutron reflection method for measurement of total hydrogen contents in Ghanaian petroleum products
84
Thermal neutron response and theoretical comparison of LiF coated aluminized Mylar
85
Thermal neutron response and theoretical comparison of LiF coated aluminized Mylar
86
Thermal neutron scattering by debye solids: a synthetic scattering function
87
Thermal neutron stars including the hyperon-hyperon interactions Original Research Article
88
Thermal neutrons’ response to the GLEs Original Research Article
89
Thermal NF3 fluorination/oxidation of cobalt, yttrium, zirconium, and selected lanthanide oxides
90
Thermal nitridation of chromium electroplated AISI316L stainless steel for polymer electrolyte membrane fuel cell bipolar plate
91
Thermal nitridation synthesis of MN (M=Ti, V and Cr) nanocrystals from metals and NH4Cl
92
Thermal nociception as a measure of non-steroidal anti-inflammatory drug effectiveness in broiler chickens with articular pain
93
Thermal Noise and Correlations in Photon Detection
94
Thermal noise from optical coatings in gravitational wave detectors
95
Thermal noise limit in the Virgo mirror suspension
96
Thermal noise limit in the Virgo mirror suspension
97
Thermal noise reduction for present and future gravitational wave detectors
98
Thermal noise reduction for present and future gravitational wave detectors
99
Thermal noise reduction of mechanical oscillators by actively controlled external dissipative forces
100
Thermal noise reduction of mechanical oscillators by actively controlled external dissipative forces
101
Thermal noise reduction of mechanical oscillators by actively controlled external dissipative forces
102
Thermal non-equilibrium modeling of heat transfer through vertical annulus embedded with porous medium
103
Thermal non-linear stresses in an adhesively bonded and laser-spot welded single-lap joint during laser–metal interaction
104
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part I. Analysis of Regularities
105
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part I. Analysis of Regularities
106
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part II. Interpretation
107
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part II. Interpretation
108
Thermal observations associated with the Portevin–Le Châtelier effect in an Al–Mg alloy
109
Thermal observations of degassing open conduits and fumaroles at Stromboli and Vulcano using remotely sensed data
110
Thermal observations of MUSES-C mission target (25143) 1998 SF 36
111
Thermal observations of Saturnʹs main rings by Cassini CIRS: Phase, emission and solar elevation dependence
112
Thermal OH (1667/1665 MHz) Absorption and Nonthermal OH (1720 MHz) Emission toward the W28 Supernova Remnant
113
Thermal optimisation of polymer extrusion using in-process monitoring techniques
114
Thermal optimization in transient thermoelasticity using response surface approximations
115
Thermal Optimization of an Array of Needle-Shaped using Constructal Theory
116
Thermal Optimization of an Array of Needle-Shaped using Constructal Theory
117
Thermal optimization of PCM based pin fin heat sinks: An experimental study
118
Thermal optimization of plate-fin heat sinks with fins of variable thickness under natural convection
119
Thermal optimization of plate-fin heat sinks with variable fin thickness
120
Thermal optimization of polybenzimidazole meniscus membranes for the separation of hydrogen, methane, and carbon dioxide
121
Thermal Optimization of the Sealed Air Layer Thickness in Transparent Film Covers of Semicylindrical Solar Greenhouses and Warm Beds
122
Thermal oscillation and resonance in dual-phase-lagging heat conduction
123
Thermal oscillations effects in surface layers of Fe–Ni system: the role of atomic and magnetic ordering
124
Thermal overload tests on a 400-MVA power transformer with a special 2.5-p.u. Short time loading
125
Thermal overload tests on a 400-MVA power transformer with a special 2.5-p.u. Short time loading capability
126
Thermal oxidation behavior of ceramic-coated Ni–Cr-base superalloys
127
Thermal oxidation behavior of hexagonal BC2N
128
Thermal oxidation behavior of WC–Co hard metal machining tool tip scraps
129
Thermal oxidation effect on corrosion behavior of Zr46Cu37.6Ag8.4Al8 bulk metallic glass
130
Thermal oxidation kinetics and oxide scale adhesion of Fe–15Cr alloys as a function of their silicon content Original Research Article
131
Thermal oxidation kinetics of an Si1−xCx alloy layer (x ≃ 0.1) on Si(0 0 1) surfaces monitored in real time by RHEED combined with AES
132
Thermal oxidation of AlGaAs: modeling and process control
133
Thermal oxidation of As and Ge implanted Si(1 0 0)
134
Thermal oxidation of cellulose investigated by chemiluminescence. The effect of water at temperatures above 100 °C
135
Thermal oxidation of chloroform
136
Thermal oxidation of cleft surface of InSe single crystal
137
Thermal oxidation of cleft surface of InSe single crystal
138
Thermal oxidation of covellite (CuS)
139
Thermal oxidation of CP Ti — An electrochemical and structural characterization
140
Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time
141
Thermal oxidation of outdiffusing SiO with permeating 0, in a SiO, film studied by angle-resolved X-ray photoelectron spectroscopy
142
Thermal oxidation of oxynitride perovskites in different atmospheres
143
Thermal oxidation of single crystalline aluminum nitride
144
Thermal oxidation of strained Si/SiGe: impact of surface morphology and effect on MOS devices
145
Thermal oxidation of the hydrogenated diamond (1 0 0) surface
146
Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization
147
Thermal oxidation of titanium to improve corrosion resistance in boiling nitric acid medium
148
Thermal oxidation of titanium: Evaluation of corrosion resistance as a function of cooling rate
149
Thermal oxidation of two malonamides, extractants for minor actinides in nuclear fuel reprocessing
150
Thermal oxidation of vanadium-free Ti alloys: An X-ray photoelectron spectroscopy study
151
Thermal oxidation of vanillin affects its antioxidant and antimicrobial properties
152
Thermal oxidation synthesis hollow MoO3 microspheres and their applications in lithium storage and gas-sensing
153
Thermal oxidation temperature dependence of 4H-SiC MOS interface
154
Thermal Oxidation Times Effect on Structural and Morphological Properties of Molybdenum Oxide Thin Films Grown on Quartz Substrates
155
Thermal oxidation treatment of B2 iron aluminide for improved wear resistance
156
Thermal oxidation-grown vanadium dioxide thin films on FTO (Fluorine-doped tin oxide) substrates
157
Thermal oxidative cutting of multi-walled carbon nanotubes Original Research Article
158
Thermal oxidative degradation behaviours of flame-retardant thermotropic liquid crystal copolyester/PET blends
159
Thermal oxidative process in extra-virgin olive oils studied by FTIR, rheology and time-resolved luminescence
160
Thermal pairing in Richardson model Original Research Article
161
Thermal parameter components of building envelope
162
Thermal particle production at SIS?
163
Thermal partition function of superstring on compactified pp-wave Original Research Article
164
Thermal patterns on a heated wall in vertical air–water flow
165
Thermal peculiarities of the electric mode formation of high temperature superconductors with the temperature-decreasing n-value Original Research Article
166
Thermal perception, adaptation and attendance in a public square in hot and humid regions
167
Thermal perceptions, general adaptation methods and occupantʹs idea about the trade-off between thermal comfort and energy saving in hot–humid regions
168
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator - part I
169
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator - part I
170
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator—Part II
171
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator—Part II
172
Thermal performance analysis and optimum design parameters of heat exchanger having perforated pin fins
173
Thermal performance analysis for a heat receiver using multiple phase change materials
174
Thermal performance analysis for solid and perforated blocks attached on a flat surface in duct flow
175
Thermal performance analysis of a flat slab phase change thermal storage unit with liquid-based heat transfer fluid for cooling applications
176
Thermal performance analysis of a solar water heating system with heat pipe evacuated tube collector using data from a field trial
177
Thermal performance analysis of an electrochromic vacuum glazing with low emittance coatings
178
Thermal performance analysis of closed wet cooling towers under both unsaturated and supersaturated conditions
179
THERMAL PERFORMANCE ANALYSIS OF CONVECTIVE-RADIATIVE FIN WITH TEMPERATURE-DEPENDENT THERMAL CONDUCTIVITY IN THE PRESENCE OF UNIFORM MAGNETIC FIELD USING PARTIAL NOETHER METHOD
180
THERMAL PERFORMANCE ANALYSIS OF GLAZED and UNGLAZED RECEIVER OF SCHEFFLER DISH
181
Thermal performance analysis of intermediate fluid vaporizer for liquefied natural gas
182
Thermal performance analysis of porous media receiver with concentrated solar irradiation
183
Thermal performance analysis of porous-microchannel heat sinks with different configuration designs
184
Thermal performance analysis of reciprocating compressor with stepless capacity control system
185
Thermal performance analysis of the glass evacuated tube solar collector with U-tube
186
Thermal performance analysis of vacuum variable-temperature blackbody system
187
Thermal performance analysis on a two composite material honeycomb heat regenerators used for HiTAC burners
188
Thermal performance analysis on unit tube for heat pipe receiver
189
Thermal performance and 3D analysis of advanced mechanically joined divertor plate for LHD under steady state high heat flux
190
Thermal performance and capillary limit of a ceramic wick applied to LHP and CPL
191
Thermal Performance and Efficiency Enhancement in Evacuated Tube Solar Collectors Using Various Nanofluids
192
Thermal performance and efficiency of convective–radiative T-shaped fins with temperature dependent thermal conductivity, heat transfer coefficient and surface emissivity
193
Thermal performance and embodied energy analysis of a passive house – Case study of vault roof mud-house in India
194
Thermal performance and energy saving effect of water-loop heat pump systems with geothermal
195
Thermal performance and exergy analysis of a thermal vapor compression desalination system
196
Thermal performance and flow instabilities in a multi-channel, helium-cooled, porous metal divertor module
197
Thermal performance and ground temperature of vertical pile-foundation heat exchangers: A case study
198
Thermal Performance and Heat Dynamics Energy and Exergy of Integrated Asphalt Collector Storage: Sources of Thermal Energy, and Thermoelectric Energy
199
Thermal performance and operational attributes of the startup characteristics of flat-shaped heat pipes using nanofluids
200
Thermal performance and optimum insulation thickness of building walls with different structure materials
201
Thermal performance and pressure drop of the helical-coil heat exchangers with and without helically crimped fins
202
Thermal performance assessment of turbulent channel flows over different shaped ribs
203
Thermal performance behavior of a domestic hot water solar storage tank during consumption operation
204
Thermal performance characteristics of a microcombustor for heating and propulsion
205
Thermal performance characterization of a photovoltaic driven domestic refrigerator
206
Thermal performance comparison between radially rotating ribbed parallelogram channels with and without dimples
207
Thermal performance enhancement in a heat exchanger tube fitted with inclined vortex rings
208
Thermal Performance Enhancement In Double Pipe Heat Exchanger By Using Inward and Outward Dimple and Corrugated Tape
209
Thermal performance enhancement of automobile radiator using water‐CuO nanofluid: an experimental study
210
Thermal performance enhancement of grooved heat pipes with inner surface treatment
211
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
212
THERMAL PERFORMANCE ENHANCEMENT OF THERMOSYPHON HEAT PIPE WITH BINARY WORKING FLUIDS
213
THERMAL PERFORMANCE ENHANCEMENT OF THERMOSYPHON HEAT PIPE WITH BINARY WORKING FLUIDS
214
Thermal performance estimation for ventilated PV facades
215
Thermal performance evaluation of a conical solar water heater integrated with a thermal storage system
216
Thermal performance evaluation of a latent heat storage unit for late evening cooking in a solar cooker having three reflectors
217
Thermal performance evaluation of a low-cost housing prototype made with plywood panels in Southern Brazil
218
Thermal performance evaluation of a prefabricated fiber-reinforced plastic building envelope system
219
THERMAL PERFORMANCE EVALUATION OF A PROPOSED POINT-FOCUS SOLAR COLLECTOR FOR LOW POWER APPLICATIONS
220
Thermal performance evaluation of an energy and environmental research center building during winter
221
Thermal performance evaluation of heat exchangers fitted with twisted-ring turbulators
222
Thermal performance evaluation of precast concrete three-wythe sandwich wall panels
223
THERMAL PERFORMANCE EVALUATION OF RENEWABLE HYBRID ENERGY SOURCES FOR HEATING GREENHOUSES
224
Thermal performance improvement by injecting air into water flow
225
Thermal Performance Improvement of Double Pass Solar Air Heater
226
Thermal performance improvement with scale imprints over boiling surface of two-phase loop thermosyphon at sub-atmospheric conditions
227
Thermal performance in circular tube fitted with coiled square wires
228
Thermal performance indicators for refrigerated road vehicles
229
Thermal performance investigation of double pass-finned plate solar air heater
230
Thermal performance investigation of several types of vertical ground heat exchangers with different operation mode
231
Thermal performance measurement of heat sinks with confined impinging jet by infrared thermography
232
Thermal performance modeling of NASA’s scientific balloons Original Research Article
233
Thermal performance of a 61-cell Si-drift detector module with thermoelectric cooler
234
Thermal performance of a 61-cell Si-drift detector module with thermoelectric cooler
235
Thermal performance of a box-type solar cooker with outer-inner reflectors
236
Thermal performance of a closed advanced two-phase thermosyphon loop for cooling of radio base stations at different operating conditions
237
Thermal performance of a commercial alkaline water electrolyzer: Experimental study and mathematical modeling
238
Thermal performance of a controlled cooling system for low-level optical signals
239
Thermal performance of a cubic cavity with a solar control coating deposited to a vertical semitransparent wall
240
Thermal Performance of a Double-Pass Solar Air Heater
241
Thermal performance of a heat pipe with nanoparticles coated wick
242
Thermal Performance of a Helical Coil Heat Exchanger Utilizing Nanofluids: A Review
243
Thermal performance of a high conductive shape-stabilized thermal storage material
244
Thermal performance of a meso-scale liquid-fuel combustor
245
Thermal performance of a micro combustor with heat recirculation
246
Thermal performance of a micro heat exchanger (MHE) working with zirconia‑based nanofuids for industrial cooling
247
Thermal performance of a micro-combustor for micro-gas turbine system
248
Thermal performance of a modified ammonia–water power cycle for reclaiming mid/low-grade waste heat
249
Thermal performance of a multi-block heat exchanger designed on the basis of Bejan’s constructal theory
250
Thermal performance of a multiple PCM thermal storage unit for free cooling
251
Thermal performance of a novel air conditioning system using a liquid desiccant
252
Thermal performance of a novel heat transfer fluid containing multiwalled carbon nanotubes and microencapsulated phase change materials
253
Thermal performance of a novel linear cavity absorber for parabolic trough solar concentrator
254
Thermal performance of a novel porous crack composite wick heat pipe
255
Thermal performance of a novel rooftop solar micro-concentrating collector
256
Thermal performance of a packed bed double-pass solar air heater
257
Thermal Performance of a Parabolic Trough Solar Concentrator Coupled with a Modified Flat Plate Collector for Greenhouse Heating
258
Thermal performance of a pcm storage unit
259
Thermal performance of a personalized ventilation air terminal device at two different turbulence intensities
260
Thermal performance of a pipe in pipe heat exchanger with sinusoidal inner pipe
261
Thermal performance of a premixed impinging circular flame jet array with induced-swirl
262
Thermal performance of a residential desuperheater/water heater system
263
Thermal performance of a shallow solar-pond integrated with a baffle plate
264
Thermal performance of a simple design solar air heater with built-in thermal energy storage system
265
Thermal performance of a simple design solar air heater with built-in thermal energy storage system
266
Thermal performance of a single basin solar still with PCM as a storage medium
267
Thermal performance of a single-basin solar still integrated with a shallow solar pond
268
Thermal performance of a single-sloped basin still with an inherent built-in additional condenser Original Research Article
269
Thermal performance of a solar cooker based on an evacuated tube solar collector with a PCM storage unit
270
Thermal performance of a solar cooker integrated vacuum-tube collector with heat pipes containing different refrigerants
271
Thermal performance of a solar pressure cooker based on evacuated tube solar collector
272
Thermal performance of a tapered store containing tubes of phase change material: Cooling cycle
273
Thermal performance of a trapezoidal-shaped solar collector/energy store
274
Thermal performance of a triple-basin solar still Original Research Article
275
Thermal performance of a two-phase thermosyphon energy storage system
276
Thermal performance of a variable capacity direct expansion solar-assisted heat pump
277
Thermal performance of a vegetated cladding system on facade walls
278
Thermal performance of a water-phase change material solar collector
279
Thermal performance of air-conditioned office buildings constructed with inclined walls in different climates in China
280
Thermal performance of Al2O3/water nanofluid in a natural circulation loop with a mini-channel heat sink and heat source
281
Thermal performance of aluminum-foam heat sinks by forced air cooling
282
Thermal performance of an active single basin solar still (ASBS) coupled to shallow solar pond (SSP) Original Research Article
283
Thermal performance of an air solar collector with an absorber plate made of recyclable aluminum cans
284
Thermal performance of an electrochromic vacuum glazing
285
Thermal performance of an innovative roof component
286
Thermal performance of an integrated collector storage solar water heater (ICSSWH) with phase change materials (PCM)
287
Thermal performance of an open thermosyphon using nanofluid for evacuated tubular high temperature air solar collector
288
Thermal performance of an open thermosyphon using nanofluids for high-temperature evacuated tubular solar collectors Part 1: Indoor experiment
289
Thermal performance of an oscillating heat pipe with Al2O3–water nanofluids
290
Thermal performance of an overhead transmission line under the influence of dust accumulation
291
Thermal performance of artificially roughened solar air heaters
292
Thermal performance of automotive aluminium plate radiator
293
Thermal performance of bedrooms in a multi-storey residential building in southern Brazil
294
Thermal performance of building element containing phase change material (PCM) integrated with ventilation system – An experimental study
295
Thermal performance of building roof elements
296
Thermal performance of circular convective–radiative porous fins with different section shapes and materials
297
Thermal performance of cold storage in thermal battery for air conditioning
298
Thermal performance of combined solar and pellet heating systems
299
Thermal Performance of Convective-Radiative Transfer Longitudinal Moving Rod with Variable Thermal Conductivity
300
Thermal performance of courtyard buildings
301
Thermal performance of cross flow cooling towers in variable wet bulb temperature
302
Thermal performance of different planting substrates and irrigation frequencies in extensive tropical rooftop greeneries
303
Thermal performance of different pond cells under actual climatic conditions in Qatar
304
Thermal performance of different working fluids in a dual diameter circular heat pipe
305
Thermal performance of dimpled surfaces in laminar flows
306
Thermal performance of direct-flow coaxial evacuated-tube solar collectors with and without a heat shield
307
Thermal performance of envelope wall/roofs of intermittent air-conditioned rooms
308
Thermal performance of flat plate solar collector using various arrangements of compound honeycomb
309
Thermal performance of flat vapor chamber heat spreader
310
Thermal performance of flat-shaped heat pipes using nanofluids
311
Thermal performance of flip chip packages: Numerical study of thermo-mechanical interactions
312
THERMAL PERFORMANCE OF FORCED DRAFT COUNTER FLOW WET COOLING TOWER WITH EXPANDED WIRE MESH PACKING
313
Thermal performance of gas-filled flat plate solar collectors
314
Thermal performance of greenhouses with a built-in solar distillation system: experimental study Original Research Article
315
Thermal Performance of HAVC System Using Heat Pipe Heat Exchanger
316
Thermal performance of heat spreader for electronics cooling with incorporated phase change material
317
Thermal performance of high brightness LED array package on PCB
318
Thermal performance of horizontal closed-loop oscillating heat pipes
319
Thermal performance of in-line diamond-shaped pin fins in a rectangular duct
320
Thermal performance of insulated roof slabs in tropical climates
321
Thermal performance of integrated collector storage solar water heater with corrugated absorber surface
322
Thermal Performance of Jet Impingement with Spent Flow Management
323
Thermal performance of linear Fresnel reflecting solar concentrator with trapezoidal cavity absorbers
324
Thermal performance of locally made flat plate solar collectors used as part of a domestic hot water system
325
Thermal performance of mechanical seals with textured side-wall
326
Thermal performance of micro-combustors with baffles for thermophotovoltaic system
327
Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux
328
Thermal performance of mixed electroosmotic-pressure driven flows in microtubes with constant wall temperature
329
Thermal performance of multilayer insulation around a horizontal cylinder Original Research Article
330
Thermal performance of multi-stage flash distillation plants in Saudi Arabia
331
Thermal performance of multi-walled carbon nanotubes (MWCNTs) in aqueous suspensions with surfactants SDBS and SDS
332
Thermal performance of myristic acid as a phase change material for energy storage application
333
Thermal performance of nanofluid flow in microchannels
334
Thermal performance of natural airflow window in subtropical and temperate climate zones – A comparative study
335
Thermal performance of natural circulation loop filled with Al2O3/Water nanofluid
336
Thermal performance of non air-conditioned buildings with vaulted roofs in comparison with flat roofs
337
Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles
338
Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids
339
Thermal Performance of Oscillating Blade with Various Geometries in a Straight Channel
340
Thermal performance of packed bed thermal energy storage units using multiple granular phase change composites
341
Thermal performance of palmitic acid as a phase change energy storage material
342
Thermal performance of parabolic concentrators under Malaysian environment: A case study
343
Thermal performance of PCM thermal storage unit for a roof integrated solar heating system
344
Thermal performance of plate-fin heat sinks under confined impinging jet conditions
345
Thermal performance of plate-fin heat sinks with piezoelectric cooling fan
346
Thermal performance of plate-fin vapor chamber heat sinks
347
Thermal performance of plate-type loop thermosyphon at sub-atmospheric pressures
348
Thermal performance of porous microchannel heat sink: Effects of enlarging channel outlet
349
Thermal performance of pulsating heat pipes with different heating patterns
350
Thermal performance of radiant heating floors in furnished enclosed spaces
351
Thermal performance of rotating two-phase thermosyphon disc
352
Thermal performance of screen mesh wick heat pipes using water-based copper nanofluids
353
Thermal performance of seawater desalination systems Original Research Article
354
Thermal performance of shallow solar pond under open cycle continuous flow heating mode for heat extraction
355
Thermal performance of Si and GaAs based solar cells and modules: a review
356
Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material
357
Thermal Performance of Solar Hot Water Systems Using a Flat Plate Collector of Accelerated Risers
358
Thermal performance of TF coils in HT-7U under plasma disruption Original Research Article
359
Thermal performance of the chilled water spirally coiled finned tube in cross flow for air conditioning applications
360
Thermal performance of the condensing covers in a triangular solar still
361
Thermal performance of the CrIS passive cryocooler Original Research Article
362
Thermal performance of the double-pass solar collector with and without porous media
363
Thermal performance of thermoplastic natural rubber solar collector
364
Thermal performance of traditional and contemporary housing in the cool season of Zambia
365
Thermal performance of traditional housing in the cool season in Zambia
366
Thermal performance of two types of energy foundation pile: Helical pipe and triple U-tube
367
Thermal performance of underground power cables with constant and cyclic currents in presence of moisture migration in the surrounding soil
368
Thermal performance of undulant narrow channel with skewed sinusoidal wall-waves and 45° ribs
369
Thermal performance of vertically-aligned multi-walled carbon nanotube array grown on platinum film
370
Thermal performance of water-based suspensions of phase change nanocapsules in a natural circulation loop with a mini-channel heat sink and heat source
371
Thermal performance of window glass panes in an enclosure fire
372
Thermal performance optimization of a flat plate solar air heater using genetic algorithm
373
Thermal performance optimization of building aspect ratio and south window size in five cities having different climatic characteristics of Turkey
374
Thermal performance optimization of free cooling systems using enhanced latent heat thermal storage unit
375
Thermal performance prediction and sensitivity analysis for future deployment of molten salt cavity receiver solar power plants in Algeria
376
Thermal performance prediction of a solar hybrid gas turbine
377
Thermal performance simulation of a solar cavity receiver under windy conditions
378
Thermal Performance Simulation of Hydroponic Green Wall in a Cold Climate
379
Thermal performance study and evaluation of comfort temperatures in vernacular buildings of North-East India
380
THERMAL PERFORMANCE STUDY OF A RADIAL MICROCHANNEL HEAT SINK USING MULTI-LAYERS DIVERGENT CHANNELS
381
Thermal performance study of box type solar cooker from heating characteristic curves
382
Thermal performance study of integrated cold plate with power module
383
Thermal Performance Study of Plate-finned Vapor Chamber Heat Sink
384
Thermal performance testing of flat-plate collectors
385
Thermal performance, economic and environmental life cycle analysis of thermosiphon solar water heaters
386
Thermal performances and CO emissions of gas-fired cooker-top burners
387
Thermal performances comparisons of the glass evacuated tube solar collectors with shapes of absorber tube
388
Thermal performances investigation of a wet cooling tower
389
Thermal performances of corrugated channel with skewed wall waves at rolling and pitching conditions
390
Thermal performances of different types of underground heat exchangers
391
Thermal performances of enhanced smooth and spiky twisted tapes for laminar and turbulent tubular flows
392
Thermal performances of the active and passive water heating systems based on annual operation
393
Thermal performances of water heaters in series
394
Thermal perturbation correlation of calcium binding Human centrin 3 and its structural changes
395
Thermal perturbation of trailing vortices
396
Thermal phase behavior of 1-butyl-3-methylimidazolium hexafluorophosphate: Simultaneous measurements of the melting of two polymorphic crystals by Raman spectroscopy and calorimetry
397
Thermal phase behavior of triethylamine–water mixtures studied by near-infrared spectroscopy: band shift of the first overtone of the C–H stretching modes and the phase diagram
398
Thermal phase lag in a solid containing periodic planar cracks
399
Thermal phase sequences in gibbsite/kaolinite clay: electron microscopy studies
400
Thermal phase transition for some spin-boson models
401
Thermal phase transition in mixed action SU (3) lattice gauge theory and Wilson fermion thermodynamics Original Research Article
402
Thermal phase transition in the NJL model of QCD Original Research Article
403
Thermal phase transition in weakly interacting, large NC QCD
404
Thermal phase transition of RbMnFe(CN)6 observed by X-ray emission and absorption spectroscopy
405
Thermal phase transitions in antimony (III) oxides
406
Thermal phase transitions of solid chiral N,N′-carbonyl-bis-(l-amino acids) and their methyl and benzyl esters
407
Thermal phenomena associated with water transport across a fuel cell membrane: Soret and Dufour effects
408
Thermal phenomena during operation of the oxygen cycle in VRLAB and processes that cause them
409
Thermal photon production in Au + Au collisions: Viscous corrections in two different hydrodynamic formalisms
410
Thermal photon production in heavy-ion collisions
411
Thermal photons and dileptons Original Research Article
412
Thermal Photons and Lepton Pairs from Quark Gluon Plasma and Hot Hadronic Matter
413
Thermal physics of transition edge sensor arrays
414
Thermal physics of transition edge sensor arrays
415
Thermal placement algorithm based on heat conduction analogy
416
Thermal placement optimization of multichip modules using a sequential metamodeling-based optimization approach
417
Thermal plant bids and market clearing in an electricity pool. Minimization of costs vs. minimization of consumer payments
418
Thermal plasma assisted rapid sintering of MgO-doped Al–Zr oxide composites
419
Thermal plasma chemical vapor deposition of wear-resistant, hard Si–C–N coatings
420
Thermal plasma composition in Saturn’s magnetosphere
421
Thermal plasma CVD and wear resistance of double layered Ti–Si–B–C/Ti–B–C coatings on WC–Co cutting tools with various roughness
422
Thermal plasma CVD of PSZ and double layered TiN/PSZ coatings by injection of alkoxides solutions with H2O
423
Thermal plasma deposition of nanophase hard coatings
424
Thermal plasma measurements onboard the magion-5 satellite: a possible plasmasphere data source Original Research Article
425
Thermal plasma processing — syntheses of diamond and β″-alumina
426
Thermal Plasma Processing of Nanostructured Si-based Ceramic Materials
427
Thermal plasma pyrolysis of used tires for carbon black recovery
428
Thermal plasma spheroidization of aluminum oxide and characterization of the spheroidized alumina powder
429
Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges
430
Thermal plasma synthesis and optical properties of Zn2SnO4 nanopowders
431
Thermal plasma synthesis of SiC nano-powders/nano-fibers
432
Thermal plasma synthesis of zinc ferrite nanopowders
433
Thermal Plasma-processed Natural Hydroxyapatite-MnO2 Nanoparticles as a Reusable and Green Heterogeneous Catalyst for Aerobic Oxidation of Benzylic Alkyl Arenes and Alcohols
434
Thermal Plasmas for Material Processing
435
Thermal plasmas: Fundamentals and applications volume 1 : M. I. Boulos, P. Fauchais and E. Wender, Plenum Press, New York, NY, 1994, 452 pages, $85.00
436
Thermal plasma-sprayed nickel catalysts in the clean-up of biomass gasification gas
437
Thermal plume effects: A multi-disciplinary approach for assessing effects of thermal pollution on estuaries using benthic diatoms and satellite imagery
438
Thermal plume models and melt generation in East Africa: A dynamic modeling approach
439
Thermal plume transport from sand and gravel pits – Potential thermal impacts on cool water streams
440
Thermal plumes of kitchen appliances: Cooking mode
441
Thermal plumes of kitchen appliances: Idle mode
442
Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes
443
Thermal pollution and settlement of new tropical alien species: The case of Grateloupia yinggehaiensis (Rhodophyta) in the Venice Lagoon
444
Thermal pollution causes global warming
445
Thermal polydimethylsiloxane degradation. Part 2. The degradation mechanisms
446
Thermal polymerization of methyl (meth)acrylate via reversible addition-fragmentation chain transfer (RAFT) process
447
Thermal polymerization of uniform macrocyclic ethylene terephthalate dimer
448
Thermal positive ion production from thallium chloride molecules impinging upon a tungsten surface heated in high vacua
449
Thermal post-buckled behaviors of cylindrical composite shells with viscoelastic damping treatments
450
Thermal postbuckled vibrations of symmetrically laminated composite plates with initial geometric imperfections
451
Thermal postbuckling analysis of FGM skew plates
452
Thermal postbuckling analysis of FGM skew plates
453
Thermal post-buckling analysis of imperfect laminated plates using a higher-order shear deformation theory
454
Thermal postbuckling analysis of imperfect stiffened laminated cylindrical shells
455
Thermal postbuckling analysis of laminated composite plates
456
Thermal postbuckling analysis of laminated cross-ply truncated circular conical shells
457
Thermal postbuckling analysis of laminated cylindrical shells with piezoelectric actuators
458
Thermal post-buckling analysis of slender columns using the concept of coupled displacement field
459
Thermal post-buckling analysis of slender columns using the concept of coupled displacement field
460
Thermal post-buckling and flutter characteristics of composite plates embedded with shape memory alloy fibers
461
Thermal post-buckling and limit-cycle oscillation of functionally graded panel with structural damping in supersonic airflow
462
Thermal post-buckling and snap-through instabilities of FGM panels in hypersonic flows
463
Thermal post-buckling and the stability boundaries of structurally damped functionally graded panels in supersonic airflows
464
Thermal postbuckling and vibration analyses of functionally graded plates
465
Thermal postbuckling behavior of 3D braided beams with initial geometric imperfection under different type temperature distributions
466
Thermal postbuckling behavior of imperfect shear deformable laminated plates with temperature-dependent properties Original Research Article
467
Thermal post-buckling behavior of patched laminated panels under uniform and non-uniform temperature distributions
468
Thermal postbuckling behavior of shear deformable FGM plates with temperature-dependent properties
469
Thermal postbuckling behavior of shear deformable FGM plates with temperature-dependent properties
470
Thermal post-buckling behaviour of laminated composite cylindrical/hyperboloid shallow shell panel using nonlinear finite element method
471
Thermal post-buckling behaviour of laminated plates using a shear-flexible element based on coupled-displacement field
472
Thermal postbuckling investigations of functionally graded plates using 3-D finite element method
473
THERMAL POST-BUCKLING OF A HEATED ELASTIC ROD WITH PINNED-FIXED ENDS
474
Thermal postbuckling of FGM cylindrical panels resting on elastic foundations
475
Thermal postbuckling of functionally graded fiber reinforced composite cylindrical shells surrounded by an elastic medium
476
Thermal postbuckling of laminated composite skew plates with temperature-dependent properties
477
Thermal Postbuckling of Preloaded Shear Deformable Laminated Plates
478
Thermal postbuckling of shear-deformable laminated plates with piezoelectric actuators
479
THERMAL POSTBUCKLING OF SLENDER ELASTIC RODS WITH HINGED ENDS CONSTRAINED BY A LINEAR SPRING
480
Thermal Postbuckling of Uniform Columns on Elastic Foundation—Intuitive Solution
481
Thermal power estimation by fouling phenomena compensation using wavelet and principal component analysis
482
Thermal power estimation by fouling phenomena compensation using wavelet and principal component analysis Original Research Article
483
Thermal power generation scheduling by simulated competition
484
Thermal power plant efficiency enhancement with Ocean Thermal Energy Conversion
485
Thermal precipitation or gelling behaviour of dissolved methylcellulose (MC) derivatives—Behaviour in water and influence on the extrusion of ceramic pastes. Part 1: Fundamentals of MC-derivatives
486
Thermal preconditioning study for bolted tension joints in pultruded GRP plate
487
Thermal preference, tolerance, and thermal aerobic scope in clownfish Amphiprion ocellaris (Cuvier, 1830) predict its aquaculture potential across tropical regions
488
Thermal preparation of chitosan–acrylic acid superabsorbent: Optimization, characteristic and water absorbency
489
Thermal preparation of thin platinum coatings and their electrochemical and atomic force microscopic characterization
490
Thermal pretreatment and hydraulic retention time in continuous digesters fed with sewage sludge: Assessment using the ADM1
491
Thermal Pretreatment for Improvement of Biogas Production and Salinity Reduction by Zeolite
492
Thermal pretreatment of algae for anaerobic digestion
493
Thermal pretreatment of low-ranked coal for control of mercury emissions
494
Thermal pre-treatment of refractory limonite ores to enhance the extraction of nickel and cobalt under heap leaching conditions
495
Thermal pre-treatment of solid fraction from mechanically-separated raw and digested slurry to increase methane yield
496
Thermal pre-treatment of wet microalgae harvest for efficient hydrocarbon recovery
497
Thermal pretreatment to improve methane production of Scenedesmus biomass
498
Thermal probes alone or with epinephrine for the endoscopic haemostasis of ulcer haemorrhage
499
Thermal Probing of E. coli RNA Polymerase Off-Pathway Mechanisms
500
Thermal problem solution using a surrogate model clustering technique Original Research Article
501
Thermal Problems Caused by Harmonic Frequency Leakage Fluxes in Three-Phase, Three-Winding Converter Transformers
502
Thermal process and surface damage of GaAs induced by 532 nm continuous laser
503
Thermal process effect of lead–indium alloy on crystal structure and superconductivity
504
Thermal process maps for predicting solidification microstructure in laser fabrication of thin-wall structures
505
Thermal processes of a powder particle in coaxial laser cladding
506
Thermal processes taking place in the bone during CO2 laser irradiation
507
Thermal processing and quality: Principles and overview
508
Thermal processing determination time for fermented and acidified indigenes iranian vegetables
509
Thermal processing induced plastic deformation in GaAs wafers
510
Thermal processing of 5-methyltetrahydrofolic acid in the UHT region in the presence of oxygen
511
Thermal Processing of Pacific Salmon in Steam/Air and Water-Immersion Still Retorts: Influence of Container Type/Shape on Heating Behavior
512
Thermal processing of plastics from waste electrical and electronic equipment for hydrogen production
513
Thermal processing of plastics from waste electrical and electronic equipment for hydrogen production
514
Thermal processing of polycrystalline NiTi shape memory alloys
515
Thermal processing of sewage sludge
516
Thermal processing of sewage sludge – II
517
Thermal processing of strained silicon-on-insulator for atomically precise silicon device fabrication
518
Thermal processing of viscous non-Newtonian fluids in annular ducts: effects of power-law rheology, duct eccentricity, and thermal boundary conditions
519
Thermal processing of waste organic substrates: Developing and applying an integrated framework for feasibility assessment in developing countries
520
Thermal processing of whole soya beans: Studies on the inactivation of antinutritional factors and effects on ileal digestibility in piglets
521
Thermal processing optimization through a modified adaptive random search Original Research Article
522
Thermal production of gravitinos Original Research Article
523
Thermal profiles of domestically baked leg-of-lamb roasts and implications for microbiological safety
524
Thermal profiles of the eclipsed moon Original Research Article
525
Thermal properties and applications of the Arrhenius equation for evaluating viscosity and oxidation rates of unrefined pollock oil Original Research Article
526
Thermal properties and biodegradability of the copolymers of l-lactide, ɛ-caprolactone, and ethylene glycol oligomer with maleate units and their crosslinked products
527
Thermal properties and combustion behaviors of flame retarded epoxy acrylate with a chitosan based flame retardant containing phosphorus and acrylate structure
528
Thermal properties and combustion behaviors of flame retarded epoxy acrylate with a chitosan based flame retardant containing phosphorus and acrylate structure
529
Thermal properties and crosslinking of binary TeO2–Nb2O5 and TeO2–WO3 glasses
530
Thermal properties and crystalline structure of poly(10-undecene-1-ol)
531
Thermal properties and crystallization behavior of dendritic polyetheramides
532
THERMAL PROPERTIES AND CRYSTALLIZATION BEHAVIOR OF HIGHLY DEPROTEINIZED NATURAL RUBBER
533
THERMAL PROPERTIES AND CRYSTALLIZATION BEHAVIOR OF HIGHLY DEPROTEINIZED NATURAL RUBBER
534
Thermal properties and crystallization behavior of some TeO2–K2O glasses
535
Thermal properties and crystallization behavior of thermoplastic starch/poly(ɛ-caprolactone) composites
536
Thermal properties and crystallization behavior of Poly(trimethylene terephthalate) copolymers containing isophthalic units
537
Thermal properties and crystallization behaviors of medium-chain-length poly(3-hydroxyalkanoate)s
538
Thermal properties and crystallization kinetics of a sodium aluminophosphate based glass
539
Thermal properties and crystallization of iron phosphate glasses containing up to 25 wt% additions of Si-, Al-, Na- and U-oxides
540
Thermal properties and crystallization of lithium–mica glass and glass-ceramics
541
Thermal properties and cure kinetics of a liquid crystalline epoxy resin with biphenyl-aromatic ester mesogen
542
Thermal properties and cw-laser operation of the ytterbium doped borate Li6Y(BO3)3
543
Thermal properties and devitrification behavior of (2.5−x)CaO·x/3La2O3·2SiO2
544
Thermal properties and firing characteristics of the Zr/KClO4/Viton A priming compositions
545
Thermal Properties and Flame Retardancy of Epoxy Resins Modified with Polysiloxane Containing Epoxy Groups and Redistributed Poly(2,6-dimethyl-l,4-phenylene) Chains
546
Thermal properties and flammability of ethylene-vinyl acetate rubbers (EVM) and their cross-linked blends with nitrile rubber (NBR)
547
Thermal properties and flammability of nanocomposites based on nitrile rubbers and activated halloysite nanotubes and carbon nanofibers
548
Thermal properties and flammability of polylactide nanocomposites with aluminum trihydrate and organoclay
549
Thermal properties and FTIR spectra of K2O/Na2O iron borophosphate glasses
550
Thermal properties and glass formation in the SiO2–B2O3–Bi2O3–ZnO quaternary system
551
Thermal properties and heat-induced aggregation of natural actomyosin extracted from goatfish (Mulloidichthys martinicus) muscle as influenced by iced storage
552
Thermal properties and hydrogen bonding in polymer blend of polybenzoxazine/poly(N-vinyl-2-pyrrolidone)
553
Thermal properties and interactions in blends of poly(ε-caprolactone) with unsaturated polyester resins
554
Thermal properties and microstructure of Roman flat window glass found in Bulgaria
555
Thermal Properties and Phase Transformation of 2 mol% Y2O3-PSZ Nanopowders Prepared by a Co-precipitation Process
556
Thermal properties and phase transitions in (NH4)3ZrF7
557
Thermal properties and physical ageing behaviour of tyrosine-derived polycarbonates
558
Thermal properties and polarized spectral analysis of Tm3+:SrWO4 crystal
559
Thermal properties and reactions towards nucleophiles of an iron complex displaying an acetyl and a pyruvoyl ligands
560
Thermal properties and shelf life of HMX–HTPB based plastic-bonded explosives
561
Thermal properties and stability of TeO2 containing phosphate glasses
562
Thermal properties and structural characterizations of new types of phase change material: Anhydrous and hydrated palmitic acid/camphene solid dispersions
563
Thermal properties and structures of chlorocadmate, bromocadmate, and bromochlorocadmate glasses
564
Thermal properties and surface energy characteristics of interpenetrating polyacrylate and polybenzoxazine networks
565
Thermal properties and temperature regime of champignon cultivation substrate
566
Thermal properties and TGA–FTIR studies of polyacrylic and polymethacrylic acid doped with metal clusters
567
Thermal properties and thermal reliability of eutectic mixtures of some fatty acids as latent heat storage materials
568
Thermal properties and thermal shock resistance of liquid phase sintered ZrC–Mo cermets
569
Thermal properties and transition studies of multi-wall carbon nanotube/nylon-6 composites Original Research Article
570
Thermal properties characterization of conductive thin films and surfaces by pulsed lasers
571
Thermal properties estimation during thawing via real-time neural network learning Original Research Article
572
Thermal properties in cured natural rubber/styrene butadiene rubber blends
573
Thermal Properties Measurement of Micro-electromechanical System Sensors by Digital Moiré Method
574
Thermal properties measurements in biodiesel oils using photothermal techniques
575
Thermal properties of (NH4)32[Mo138O416H6(H2O)58(CH3COO)6]·approximately 250H2O: on the route to prove the complexity of a nanostructured landscape—especially with different type of H2O ligands—embedded in an ‘ocean’ of water molecules
576
Thermal properties of 1-alkyl-3-methylpyridinium halide-based ionic liquids
577
Thermal properties of 2-(aminomethyl)dicarboxylic acids
578
Thermal properties of a DNA denaturation with solvent interaction
579
Thermal properties of a hot pion gas beyond the quasiparticle approximation
580
Thermal properties of a new class of block copolymers based on segments of poly(d,l-lactic-glycolic acid) and poly(ε-caprolactone)
581
Thermal properties of a novel nanoencapsulated phase change material for thermal energy storage
582
Thermal properties of a reaction hot pressed Mo≤5Si3C≤1 ceramic
583
Thermal properties of a solid through -deformed algebra
584
Thermal properties of a variable cavity wall
585
Thermal properties of agave fructans (Agave tequilana Weber var. Azul)
586
Thermal properties of aligned carbon nanotube/carbon nanocomposites
587
Thermal properties of aligned carbon nanotube/carbon nanocomposites
588
Thermal properties of aligned carbon nanotube/carbon nanocomposites
589
Thermal properties of alkaline sodium borohydride solutions
590
Thermal Properties of Alkali-Treated Sugar Palm Fibre Reinforced High Impact Polystyrene Composites
591
Thermal properties of alkyloctamethylferrocenium salts with TFSA and TCNE (TFSA = bis(trifluoromethylsulfonyl)amide and TCNE = tetracyanoethylene)
592
Thermal properties of alkyl-substituted 3,3′-bis(dipyrrolylmethene) dihydrobromides
593
Thermal properties of amine cured diglycidyl ether of bisphenol A epoxy blended with poly(ether imide)
594
Thermal properties of asymmetrical nuclear matter with the new charge-dependent Reid potential Original Research Article
595
Thermal properties of bacterial spores and biopolymers
596
Thermal properties of ball-milled nanocrystalline Fe, Co and Cr powders
597
Thermal properties of barium titanium borate glasses measured by thermal lens technique
598
Thermal properties of beryllium
599
Thermal properties of BeX (X = S, Se and Te) compounds from ab initio quasi-harmonic method
600
Thermal properties of biodegradable poly(PHB/PCL-PEG-PCL) urethanes nanocomposites using clay/poly(ε-caprolactone) nanohybrid based masterbatch
601
Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content
602
Thermal properties of bodies in fractal and cantorian physics
603
Thermal properties of calorimeters with Ti/Au transition-edge sensors on silicon nitride membranes
604
Thermal properties of calorimeters with Ti/Au transition-edge sensors on silicon nitride membranes
605
Thermal properties of CaMgSi2O6 glass–ceramics with Al2O3
606
Thermal properties of carbon fibers at very high temperature Original Research Article
607
Thermal properties of carbon inverse opal photonic crystals
608
Thermal properties of chalcogenide glasses in the GeSe2–As2Se3–CdSe system
609
Thermal properties of chemically synthesized polyaniline (EB) powder
610
Thermal Properties of Chillies
611
Thermal properties of clustered systems of mixed composition: the temperature response of Si–Al clusters studied quantum mechanically
612
Thermal properties of CNT-Alumina nanocomposites
613
Thermal properties of cometary ices and sublimation residua including organics
614
Thermal properties of complexes of amaranthus starch with selected metal salts
615
Thermal properties of copper-coated carbon foams Original Research Article
616
Thermal properties of cumin seed Original Research Article
617
Thermal properties of Cu–Pd alloy under high pressure
618
Thermal properties of cutting tool coatings at high temperatures
619
Thermal properties of di- and triblock copolymers of poly(l-lactide) with poly(oxyethylene) or poly(ε-caprolactone)
620
Thermal properties of diamond particle-dispersed Cu composites
621
Thermal properties of diamond/SiC/Al composites with high volume fractions
622
Thermal properties of DMNB, a detection agent for explosives
623
Thermal properties of elastic fibers
624
Thermal properties of Er:Li2TiGeO5 ferroelastic ceramics
625
Thermal properties of ethylene octene copolymer (Engage)/ dimethyldioctadecyl quaternary ammonium chloride-modified montmorillonite clay nanocomposites
626
Thermal properties of ethylene/long chain α-olefin copolymers produced by metallocenes
627
Thermal properties of fullerene (C60) containing poly(alkyl methacrylate)s
628
Thermal properties of glass frit and effects on Si solar cells
629
Thermal properties of gluten proteins of two soft wheat varieties
630
Thermal properties of glycine phosphite across ferroelectric phase transition: a photopyroelectric study
631
Thermal properties of graphene and multilayer graphene: Applications in thermal interface materials
632
Thermal properties of graphite intercalation compounds with acids Original Research Article
633
Thermal properties of Hf-based metallic glasses
634
Thermal properties of Hf-based metallic glasses
635
Thermal properties of high refractive index epoxy resin system
636
Thermal properties of high-power diode lasers investigated by means of high resolution thermography
637
Thermal properties of homogenous lanthanum hexaaluminate/alumina composite ceramics
638
Thermal properties of hydrating calcium aluminate cement pastes
639
Thermal properties of hydride fuel 45% U–ZrH1.6
640
Thermal properties of hydrogenated amorphous silicon prepared by high-density plasma chemical vapor deposition Original Research Article
641
Thermal properties of image isotones Original Research Article
642
Thermal properties of imidazolium ionic liquids
643
Thermal properties of Jatropha curcas L. kernels
644
Thermal properties of La2O3-doped ZrB2- and HfB2-based ultra-high temperature ceramics
645
Thermal properties of lauric acid/1-tetradecanol binary system for energy storage
646
Thermal properties of Li conducting superionic matirials
647
Thermal properties of Li4/3Ti5/3O4/LiMn2O4 cell
648
Thermal properties of magnetic flux tubes II. Storage of flux in the solar overshoot region
649
Thermal properties of maize masa and tortillas with different components from maize grains, and additives Original Research Article
650
Thermal Properties of Maleated Polyethylene/Layered Silicate Nanocomposites
651
Thermal properties of medium-sized Ge clusters
652
Thermal properties of metamorphic buffer materials for growth of InP double heterojunction bipolar transistors on GaAs substrates
653
Thermal properties of mine tailings and tire crumbs mixtures
654
Thermal Properties of Minor Millet Grains and Flours
655
Thermal properties of Mo3Te4
656
Thermal properties of MoSi2 with minor aluminum substitutions
657
Thermal properties of multicomponent tellurite glass
658
Thermal properties of multicomponent tellurite glass
659
Thermal properties of N-alkyl-N-methylpyrrolidinium and N-butylpyridinium fluorometallates and physicochemical properties of their melts
660
Thermal properties of nanoporous carbons prepared by a template method using different polymeric and organic precursors
661
Thermal properties of nanoporous carbons prepared by a template method using different polymeric and organic precursors
662
Thermal properties of NbTi superconductor wire and its heat release performance over quench
663
Thermal properties of NbTi superconductor wire and its heat release performance over quench
664
Thermal properties of neutron irradiated Se80Te10In10 glass
665
Thermal properties of neutron irradiated Se80Te10In10 glass
666
Thermal properties of new catalysts based on heteropolyanion-doped polyaniline
667
Thermal properties of non-crystallizable oil-in-water highly concentrated emulsions
668
Thermal properties of novel supramolecular polymer networks based on poly(4-vinylpyridine) and disulfonic acids
669
Thermal Properties of Oil Palm Shell Lightweight Concrete with Different Mix Designs
670
Thermal properties of oxides with magnetoplumbite structure for advanced thermal barrier coatings
671
Thermal properties of paraffin based composites containing multi-walled carbon nanotubes
672
Thermal properties of particulate TIMs in squeeze flow
673
Thermal properties of Pb[(Zn1/3Nb2/3)0.93Ti0.07]O3 single crystals grown by the flux Bridgman method
674
Thermal properties of PETI-5/IM7
675
Thermal properties of phase change material Ge2Sb2Te5 doped with Bi
676
Thermal properties of Phaseolus angularis (red bean) globulin
677
Thermal properties of photonic crystals
678
Thermal properties of phthalic anhydride- and phenolic resin-cured rigid rod epoxy resins
679
Thermal properties of phthalonitrile functional polybenzoxazines
680
Thermal properties of pineapple leaf fiber reinforced composites
681
Thermal properties of pineapple leaf fiber reinforced composites
682
Thermal properties of pineapple leaf fiber reinforced composites
683
Thermal properties of pitch-derived graphite foam
684
Thermal properties of plasma exposed carbon and heat flux calculations on a spatial scale of a few microns
685
Thermal properties of plasma-sprayed thermal barrier coating with bimodal structure
686
Thermal properties of plasma-sprayed tungsten deposits
687
Thermal properties of Pluto’s and Charon’s surfaces from Spitzer observations
688
Thermal properties of poly(butylene oxalate) copolymerized with azelaic acid
689
Thermal properties of poly(ethylene oxide)/lauric acid blends: A SSA–DSC study
690
Thermal properties of poly(ethylene succinate) nanocomposite
691
Thermal properties of poly(lactic acid) fumed silica nanocomposites: Experiments and molecular dynamics simulations
692
Thermal properties of poly(l-lactide)/olive stone flour composites
693
Thermal properties of polycrystalline NdN bulk samples with various porosities
694
Thermal properties of polyethylene/montmorillonite nanocomposites prepared by intercalative polymerization
695
Thermal properties of polypropylene/wax blends
696
Thermal properties of polystyrene/group IIB dithizonate films
697
Thermal properties of porous copolymers of BM-DVB and their carbonization products
698
Thermal properties of porous copolymers of BM–DVB and their carbonization products
699
Thermal properties of raw and processed wheat gluten in relation with protein aggregation
700
Thermal properties of redeposition layers in the JT-60U divertor region
701
Thermal Properties of Restructured Beef Snack Sticks Throughout Smokehouse Processing
702
Thermal properties of rigid rod epoxies cured with diaminodiphenylsulfone and dicyandiamide
703
Thermal properties of Si(Al)/diamond composites prepared by in situ reactive sintering
704
Thermal properties of silicon carbide composites fabricated with chopped Tyranno® SiAlC fibres
705
Thermal properties of silicon powder filled high-density polyethylene composites
706
Thermal properties of single-phase Y2SiO5
707
Thermal properties of slow dynamics
708
Thermal properties of Sm2Zr2O7–NiCr2O4 composites
709
Thermal properties of sodium-exchanged palabora vermiculite
710
Thermal Properties of Soils as affected by Density and Water Content
711
Thermal properties of some biologically active 5-(p-substituted phenylazo)-6-aminouracil complexes
712
Thermal properties of some biologically active 5-(p-substituted phenylazo)-6-aminouracil complexes
713
Thermal properties of some CoII, NiII and CuII complexes of new substituted pyrimidine compounds
714
Thermal properties of some pyrimidine, purine, amino-acid and mixed ligand complexes
715
Thermal properties of Sr3Ga2Ge4O14 single crystals grown by the vertical Bridgman method
716
Thermal properties of starch succinates
717
Thermal properties of straw mushroom Original Research Article
718
Thermal properties of structural materials used in LWR vessels
719
Thermal Properties of Tantalum Between 300 and 2300 K
720
Thermal properties of the composite material clay/granular cork
721
Thermal properties of the Fe3Al-5 at.% Cr intermetallic compound and thermal diffusivtty anomaly in D03 phase
722
Thermal properties of the nitrogen-rich Ca-α-Sialons
723
Thermal properties of the plasma-sprayed MgTiO3–CaTiO3 and CaTiO3
724
Thermal properties of the pyrochlore, Y2Ti2O7
725
Thermal properties of thin and thick Ni3Al cluster assembled layers: an atomic scale simulation study
726
Thermal properties of titanium hydrides
727
Thermal properties of titin from porcine and bovine muscles
728
Thermal properties of VPS-W coatings on CuCrZr alloy with Ti bonding layer
729
Thermal properties of wood-derived copper–silicon carbide composites fabricated via electrodeposition
730
Thermal properties of Y(BH4)3 synthesized via two different methods
731
Thermal properties of yttrium hydride
732
Thermal properties of zeolites: effective thermal conductivity of dehydrated powdered zeolite 4A
733
Thermal properties of zirconia co-doped with trivalent and pentavalent oxides Original Research Article
734
Thermal properties of zirconium hydride
735
Thermal properties predictive model for insulating foams
736
Thermal Properties, Crystallinity, and Oxygen Permeability of Na-montmorillonite Reinforced Plasticized Poly(lactic acid) Film
737
Thermal Properties, Heat Sealability and Seal Attributes of Whey Protein lsolate/ Lipid Emulsion Edible Films
738
Thermal properties, miscibility and specific interactions in comparison of linear and star poly(methyl methacrylate) blend with phenolic
739
Thermal properties, sizes, and size distribution of Jupiter-family cometary nuclei
740
Thermal properties, specific interactions, and surface energies of PMMA terpolymers having high glass transition temperatures and low moisture absorptions
741
Thermal property analysis and applications of GFRP panels to integral abutment bridges
742
Thermal property and latent heat energy storage behavior of sodium acetate trihydrate composites containing expanded graphite and carboxymethyl cellulose for phase change materials
743
Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems
744
Thermal property characterization of a titanium modified austenitic stainless steel (alloy D9)
745
Thermal property characterization of fine fibers by the 3-omega technique
746
Thermal property evolution of metal based thermal barrier coatings with heat treatments
747
Thermal property measurement and heat storage analysis of LiNO3/KCl – expanded graphite composite phase change material
748
Thermal property measurement and heat transfer analysis of acetamide and acetamide/expanded graphite composite phase change material for solar heat storage
749
Thermal property measurement of Mexican geothermal cementing systems using an experimental technique based on the Jaeger method
750
Thermal property measurement of thin aluminum oxide layers for giant magnetoresistive (GMR) head applications
751
Thermal Property Measurements and Enthalpy Calculation of the Lithium Bromide+Lithium Iodide+1,3-Propanediol+Water System
752
Thermal property measurements for ecoroof soils common in the western U.S.
753
Thermal property prediction and measurement of organic phase change materials in the liquid phase near the melting point
754
Thermal protection from a finite period of heat exposure – Heat survival of flight data recorders
755
Thermal protection of H13 steel by growth of (TiAl)N films by PAPVD pulsed arc technique
756
Thermal protection of β-carotene in re-assembled casein micelles during different processing technologies applied in food industry
757
Thermal protection system development, testing, and qualification for atmospheric probes and sample return missions: Examples for Saturn, Titan and Stardust-type sample return Original Research Article
758
Thermal protection with liquid film in turbulent mixed convection channel flows
759
Thermal protein unfolding in photo-activated adenylate cyclase nano-clusters from the amoeboflagellate Naegleria gruberi NEG-M strain
760
Thermal pyrolysis characteristics of polymer flocculated waste activated sludge
761
Thermal pyrolysis of fresh and waste fishing nets
762
THERMAL QUANTITATIVE SENSORY TESTING IN FIBROMYALGIA PATIENTS
763
Thermal quantum discord of one-dimensional in three-qubit spin chain with nearest-neighbor and next-nearest neighbor and Dzyaloshinskii-Morriya interaction
764
Thermal quantum fields with spatially cutoff interactions in 1+1 space–time dimensions
765
Thermal quantum Fisher information in quantum dot system
766
Thermal quasiparticle correlations and continuum coupling in nuclei far from stability Original Research Article
767
Thermal quench study in HTSC pancake coil Original Research Article
768
Thermal quenching and electron traps in LSO
769
Thermal quenching behavior of emission bands in Eu-doped ZnS nanowires
770
Thermal quenching characteristics in LaPO4:Eu nanoparticles and nanowires
771
Thermal quenching mechanisms of the Eu3+ luminescence in Ca9Al(PO4)7 obtained by citric route
772
Thermal quenching of defect photoluminescence and recombination rates of electron–hole pairs in a-Si:H
773
Thermal quenching of electroluminescence assisted by an electric field in thin films of tris-(8-hydroxyquinolinato) aluminum (III)
774
Thermal quenching of fluorescence of freshwater, planktonic bacteria Original Research Article
775
Thermal quenching of photoluminescence in ZnO/ZnMgO multiple quantum wells following oxygen implantation and rapid thermal annealing
776
Thermal radiation and buoyancy effects on MHD free convective heat generating flow over an accelerating permeable surface with temperature-dependent viscosity
777
Thermal radiation and chemical reaction effects on magnetohydrodynamic freeconvection heat and mass transfer in a micropolar fluid
778
Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet
779
Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder
780
Thermal radiation as a learned orientation cue in leaf-cutting ants (Atta vollenweideri)
781
Thermal Radiation Calorimeter for Measuring the Specific Heat Capacity of Liquid Samples
782
Thermal Radiation Effect on Hydromagnetic Flow of Dusty Fluid over a Stretching Vertical Surface
783
Thermal radiation effect on mixed convection from vertical surfaces in saturated porous media
784
Thermal radiation effects in phase-change energy-storage systems
785
Thermal radiation effects on magnetohydrodynamic free convection heat and mass transfer from a sphere in a variable porosity regime
786
THERMAL RADIATION EFFECTS ON MHD BOUNDARY LAYER SLIP FLOW PAST A PERMEABLE EXPONENTIAL STRETCHING SHEET IN THE PRESENCE OF JOULE HEATING and VISCOUS DISSIPATION
787
Thermal Radiation Effects on MHD Boundary Layer Slip Flow Past a permeable Exponential Stretching Sheet in the Presence of Joule Heating and Viscous Dissipation
788
Thermal Radiation Effects on MHD Boundary Layer Slip Flow Past a permeable Exponential Stretching Sheet in the Presence of Joule Heating and Viscous Dissipation
789
Thermal radiation effects on MHD flow of a micropolar fluid over a stretching surface with variable thermal conductivity
790
Thermal radiation effects on power-law fluids over a horizontal plate embedded in a porous medium
791
Thermal radiation from nonisothermal spherical particles of a semitransparent material
792
Thermal radiation in ultralight metal foams with open cells
793
Thermal Radiation Mapping the Space–Time Evolution
794
Thermal radiation modelling of DC smelting furnace freeboards
795
Thermal radiation of semitransparent plane-parallel objects
796
Thermal Radiative Properties and Temperature Measurement from Turbine Coatings
797
Thermal radiative properties of a DLC coating
798
Thermal radiative properties of carbon materials under high temperature and vacuum ultra-violet (VUV) radiation for the heat shield of the Solar Probe Plus mission
799
Thermal radiators with embedded pulsating heat pipes: Infra-red thermography and simulations
800
Thermal ratcheting of solder-bonded elastic and elastoplastic layers
801
Thermal rate constants of the pyrolysis of n-Heptane
802
Thermal rate constants over thirty orders of magnitude for the I+H2 reaction
803
Thermal rating assessment of overhead lines by Affine Arithmetic
804
Thermal reaction and desorption behaviors of 2,5-diiodothiophene on clean and passivated Au surfaces
805
Thermal reaction behavior of ZrSiO4 and CaCO3 mixtures for high-temperature refractory applications
806
Thermal reaction behavior of ZrSiO4 and CaCO3 mixtures for high-temperature refractory applications
807
Thermal reaction of cyclic alkadiene with trichlorosilane. Preparative and mechanistic aspects
808
Thermal reaction of SiC films with tungsten and tungsten–rhenium alloys
809
Thermal reaction processes of ternary metal (Au, Ag, Cu) adsorbates on the Si(111) surface
810
Thermal reactions and micro-structure of TiN–AlN layered nano-composites
811
Thermal reactions and micro-structure of TiN–AlN layered nano-composites
812
Thermal reactions at the interface between Si and C nanoparticles: nanotube self-assembling and transformation into SiC
813
Thermal reactions between alkanes and H2S or thiols at high pressure
814
Thermal reactions between alkanes and H2S or thiols at high pressure
815
Thermal reactions in interstellar ice: A step towards molecular complexity in the interstellar medium Original Research Article
816
Thermal reactions of 2-iodoethanol on Cu(1 0 0)
817
Thermal reactions of acetic acid: 13C/12C partitioning between CO2 and CH4
818
Thermal reactions of endo- and exo-6-methylbicyclo[3.2.0]hept-2-enes: an experimental test for a potential ring inversion
819
Thermal reactions of guaiacol and syringol as lignin model aromatic nuclei
820
Thermal reactions of guaiacol and syringol as lignin model aromatic nuclei
821
Thermal reactions of lithiated graphite anode in LiPF6-based electrolyte
822
Thermal reactions of mercaptoethanol on Cu(1 0 0)
823
Thermal reactions of mesocarbon microbead (MCMB) particles in LiPF6-based electrolyte
824
Thermal reactions of pivaloyl- and adamantoyl(tert-butylethynyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene and diphenylacetylene
825
Thermal reactions of pivaloyl- and adamantoyl(tert-butylethynyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene and diphenylacetylene
826
Thermal reactions of smectites—Relation of dehydroxylation temperature to octahedral structure
827
Thermal reactions of starch with long-chain unsaturated fatty acids. Part 2. Linoleic acid Original Research Article
828
Thermal reactions of starch with proteogenic amino acids
829
Thermal reactions of uranium metal, UO2, U3O8, UF4, and UO2F2 with NF3 to produce UF6
830
Thermal reactions on the Cl-terminated SiGe(1 0 0) surface
831
Thermal reactivation of ammonia-tailored granular activated carbon exhausted with perchlorate Original Research Article
832
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
833
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
834
Thermal reactivities of non-reducing sugars in polyether—Role of intermolecular hydrogen bonding in pyrolysis
835
Thermal reactivities of non-reducing sugars in polyether—Role of intermolecular hydrogen bonding in pyrolysis
836
Thermal reactivity of cis- and trans-bis(triphenylgermyl)bis(tertiary phosphine)platinum(II)
837
Thermal reactivity of Group 9 transition metal pinacolate complexes: heterocumulene cleavage and CO bond formation
838
Thermal reactivity of rapeseed (Brassica napus L.) under different gas atmospheres
839
Thermal rearranged poly(benzoxazole-co-imide) membranes for CO2 separation
840
Thermal Rearrangement of 2,5-Bis(dicyanomethylene)bicyclo[4.2.0]oct-7-ene and 2,5-Bis(dicyanomethylene)bicyclo[4.2.0] octa-3,7-diene. Unexpected Formation of 2,6-Bis(dicyanomethylene)bicyclo[3.3.0]octa-1(5)-ene and -octa-3,7-diene, New Electron Acceptors
841
Thermal rearrangement of oxygen adsorbed on oxygen-rich Ru(0 0 0 1)
842
Thermal rearrangement of oxygen adsorbed on oxygen-rich Ru(0 0 0 1)
843
Thermal rearrangement of some benzoin arylsulfonylhydrazone derivatives
844
Thermal rearrangement of spiro[naphthalene(naphthopyranofurazan)]oxides to spiro[naphthalene(phenalenofurazan)oxides. A probable furazan oxide triggered tandem isomerisation process
845
Thermal rearrangement of substituted difluoro(methylene)cyclopropane
846
Thermal rearrangements of bis-allenyl thiosulfonates. Synthesis of novel thienothiophene and thieno-oxathiine derivatives
847
Thermal rearrangements of tetrahydroimidazo[1,5-b]isoxazole-2,3-dicarboxylates. Synthesis of 3H-imidazol-1-ium ylides and their silver derivatives
848
Thermal rearrangements of α-(ω-azidoalkyl) enones
849
Thermal reconstruction behavior of the quenched hydroxyapatite powder during reheating in air
850
Thermal recovery and lattice expansion of self-irradiated U0.80Am0.20O2−x, an in situ high temperature x-ray diffraction study
851
Thermal recovery of amorphous zones in 6H-SiC and 3C-SiC induced by low fluence 420 keV Xe irradiation
852
Thermal recovery of antioxidant activity from carnosol quinone, the main antioxidation product of carnosol
853
Thermal recovery strategies for thin heavy oil reservoirs
854
Thermal rectification based on thermochromic materials
855
Thermal rectification between two thermoelastic solids with a periodic array of rough zones at the interface
856
Thermal rectification in nonmetallic solid junctions: Effect of Kapitza resistance
857
Thermal rectification of a single-wall carbon nanotube: A molecular dynamics study
858
Thermal recuperative incineration of VOCs: CFD modelling and experimental validation
859
Thermal recycling of polystyrene and polystyrene-butadiene dissolved in a light cycle oil
860
Thermal redistribution of energy from an excited 3ππ∗ term to a nearby chemically reactive 3dd level in [Rh(III)(NN)3](PF6)3 complexes
861
Thermal redistribution of hydrogen and boron in SiO2 in SiN-capped p-type MOSFET structures
862
Thermal reduction effect on Curie temperature of LiNbO3 ferroelectrics
863
Thermal reduction of barium sulphate with carbon monoxide—A thermogravimetric study
864
Thermal reduction of molybdite and hematite in water and hydrogen peroxide-bearing solutions: Insights on redox conditions in Hydrothermal Diamond Anvil Cell (HDAC) experiments
865
Thermal regeneration and decoking optimization of chlorinated platinum/alumina catalysts for the isomerization process
866
Thermal regeneration of a spent activated carbon previously used as hydrogen sulfide adsorbent Original Research Article
867
Thermal regeneration of activated carbon saturated with p-nitrophenol Original Research Article
868
Thermal regeneration of activated carbons saturated with ortho- and meta-chlorophenols
869
Thermal regeneration of an activated carbon exhausted with different substituted phenols Original Research Article
870
Thermal regeneration of sulfuric acid hydrates after irradiation
871
Thermal regeneration of the metal organic frameworks used in the adsorption of refractory organosulfur compounds from liquid fuels
872
Thermal regeneration study of high surface area activated carbon obtained from coconut shell: Characterization and application of response surface methodology
873
Thermal regeneration study of high surface area activated carbon obtained from coconut shell: Characterization and application of response surface methodology
874
Thermal regime in the embankment of Qinghai–Tibetan Highway in permafrost regions
875
Thermal regime of conventional embankments along the Qinghai–Tibet Railway in permafrost regions
876
Thermal regime of frozen soil foundation affected by concrete base of transmission line tower on the Tibetan Plateau
877
Thermal regime of sporadic permafrost in a block slope on Mt. Nishi-Nupukaushinupuri, Hokkaido Island, Northern Japan
878
Thermal regime of the Aral Sea in the modern period (1982–2000) as revealed by satellite data
879
Thermal regime of the North China Craton: Implications for craton destruction
880
Thermal regime of the northwest Indian rifted margin – Comparison with predictions
881
Thermal regime, groundwater flow and petroleum occurrences in the Cap Bon region, northeastern Tunisia
882
Thermal regime, hydrocarbon maturation and geodynamic events along the western margin of India since late Cretaceous
883
Thermal regimes at the snow–ground interface and their implications for permafrost investigation
884
Thermal regimes in solar-thermal linear collectors
885
Thermal regimes in the Chukchi Sea from 1941 to 2008
886
Thermal regimes of high burn-up nuclear fuel rod
887
Thermal regimes of passivative oxide film formation on Al surface: Theoretical and experimental study
888
Thermal regrowth of Si(100) damaged by Ne, Ar, and Xe ion bombardment
889
Thermal regulation of building-integrated photovoltaics using phase change materials
890
Thermal relaxation and deformation of indented graphene
891
Thermal relaxation behavior of residual stress in laser hardened 17-4PH steel after shot peening treatment
892
Thermal relaxation calorimetry on ethanol at low temperatures
893
Thermal relaxation during dynamic fuel cell operation
894
Thermal relaxation for the Relativistic Ornstein–Uhlenbeck Process
895
Thermal relaxation in charge ordered Pr0.63Ca0.37MnO3 in the presence of a magnetic field
896
Thermal relaxation in DNA
897
Thermal relaxation of isolated silicon pyramids on the Si(1 0 0)2×1 surface
898
Thermal relaxation of residual stress in laser shock peened Ti–6Al–4V alloy
899
Thermal relaxation of residual stresses in shot peened surface layer of (TiB + TiC)/Ti–6Al–4V composite at elevated temperatures
900
Thermal relaxation of water due to interfacial processes and phase equilibria in 1.8 nm pores of MCM-41
901
Thermal relaxation processes in Si1−xGex/Si quantum wells studied by inter-subband and inter-valence band spectroscopy
902
THERMAL RELAXATION TIMES EFFECT ON RAYLEIGH WAVES IN GENERALIZED THERMOELASTIC MEDIA
903
Thermal release behavior of Fe+, CpFe+ and (Cp)2Fe+ ions from the molecular aggregate of β-cyclodextrin with ferrocene
904
Thermal release of nitrogen organics from natural organic matter using micro scale sealed vessel pyrolysis
905
Thermal release rate of tritium trapped in bulk and plasma exposed surfaces of carbon specimens obtained from JET divertor
906
Thermal reliability of thin SiGe epilayers
907
Thermal reliability test of Al–34%Mg–6%Zn alloy as latent heat storage material and corrosion of metal with respect to thermal cycling
908
Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications
909
Thermal relic abundances of long-lived staus Original Research Article
910
Thermal remediation of oil polluted sands from black tides: The fluidized bed option
911
Thermal remediation of PCDD/Fs contaminated soil by zone combustion process
912
Thermal remote sensing of estuarine spatial dynamics: Effects of bottom-generated vertical mixing
913
Thermal remote sensing of near-surface water vapor
914
Thermal remote sensing of urban areas: An introduction to the special issue
915
Thermal remote sensing of urban climates
916
Thermal remote sensing of water under flooded vegetation: New observations of inundation patterns for the ‘Small’ Lake Chad
917
Thermal Removal of Ammonia from Mordenite
918
Thermal removal of multicomponent binder from ceramic injection mouldings
919
Thermal removal of oxide and carbide from 6H–SiC surfaces before molecular beam epitaxial growth of GaN
920
THERMAL REQUIREMENTS FOR DEVELOPMENT OF Aphis nerii BOYER DE FONSCOLOMBE AND ITS PREDATOR Cydonia vicina isis MULS
921
Thermal requirements for the embryonic development of Periplaneta americana (L.) (Dictyoptera: Blattidae) with potential application in mass-rearing of egg parasitoids
922
Thermal requirements to obtain calcined and frits of ulexite
923
Thermal residual microstresses in steel-NbC particulate composites studied by X-ray and neutron diffraction
924
Thermal residual microstresses in steel-NbC particulate composites studied by X-ray and neutron diffraction
925
Thermal residual stress analysis of epoxy bi-material laminates and bonded joints
926
Thermal residual stress distribution in WC-Ni composites
927
Thermal residual stress distribution in WC-Ni composites
928
Thermal residual stress evolution in a TiC–50 vol.% Ni3Al cermet
929
Thermal residual stress gradients in an alumina–zirconia composite obtained by electrophoretic deposition
930
Thermal residual stresses effects on fatigue crack growth of repaired panels bounded with various composite materials
931
Thermal residual stresses in a functionally graded material system
932
Thermal residual stresses in a functionally graded material system
933
Thermal residual stresses in an adhesively bonded functionally graded tubular single lap joint
934
Thermal residual stresses in co-continuous composites Original Research Article
935
Thermal residual stresses in NiAl–AlN–Al2O3 composites measured by neutron diffraction
936
Thermal residual stresses in NiAl–AlN–Al2O3 composites measured by neutron diffraction
937
Thermal residual stresses in particulate composites and its toughening effect
938
Thermal residual stresses in plates and coatings composed of multi-layered and functionally graded materials
939
Thermal resistance analysis by induced transient (TRAIT) method for power electronic devices thermal characterization. I. Fundamentals and theory
940
Thermal resistance analysis by induced transient (TRAIT) method for power electronic devices thermal characterization. II. Practice and experiments
941
Thermal resistance and apparent thermal conductivity of thin plasma-sprayed mullite coatings
942
Thermal resistance and dynamic damping properties of poly (styrene–butadiene–styrene)/thermoplastic polyurethane composites elastomer material
943
Thermal resistance and phonon scattering at the interface between carbon nanotube and amorphous polyethylene
944
Thermal resistance at a liquid–solid interface dependent on the ratio of thermal oscillation frequencies
945
Thermal resistance degradation of surface mounted power devices during thermal cycling
946
Thermal resistance degradation of surface mounted power devices during thermal cycling
947
Thermal resistance effect on methanol-steam reforming performance in micro-scale reformers
948
Thermal Resistance Evaluation of Raffia Palm Ash Concrete
949
Thermal resistance in conductive constructal designs of arbitrary configuration: A new general approach
950
Thermal resistance of a multi-constrictions contact: A simple model
951
Thermal resistance of nanoporous antireflective coatings on silica glass for solar tower receivers
952
Thermal resistance of pectin methylesterase in tomato juice
953
Thermal resistance of Salmonella enterica serovar Anatum on cabbage surfaces during drying: Effects of drying methods and conditions
954
Thermal resistance of Salmonella enteritidis and Escherichia coli K12 in liquid egg determined by thermal-death-time disks
955
Thermal resistance of Salmonella serovars isolated from raw, frozen chicken nuggets/strips, nugget meat and pelleted broiler feed
956
Thermal resistance of screen mesh wick heat pipes using the water-based Al2O3 nanofluids
957
Thermal resistance of β-galactosidase in dehydrated dairy model systems as affected by physical and chemical changes
958
Thermal resistance simulation for CoF packages
959
Thermal resistance to high temperatures of different organic fractions from soils under pine forests
960
Thermal resistances and lactate and diacetate sensitivities of bacteria causing bologna discolouration
961
Thermal resistances of local building materials and their effect upon the interior temperatures case of a building located in Ghardaïa region
962
Thermal response and reversibility of prolonged larval diapause in the chestnut weevil, Curculio sikkimensis
963
Thermal response in thermal energy storage material around heat transfer tubes: effect of additives on heat transfer rates
964
Thermal response of a flat heat pipe sandwich structure to a localized heat flux
965
Thermal response of a heat pipe with axially “Ω”-shaped microgrooves
966
Thermal response of a microgel system
967
Thermal response of a series- and parallel-connected solar energy storage to multi-day charge sequences
968
Thermal Response of a Two-Phase Near-Critical Fluid in Low Gravity: Strong Gas Overheating as Due to a Particular Phase Distribution
969
Thermal response of composite building envelopes accounting for thermal radiation
970
Thermal response of domains in cardiolipin content bilayers
971
Thermal response of domains in cardiolipin content bilayers
972
Thermal response of domains in cardiolipin content bilayers
973
Thermal response of glass fibre/epoxy composites with embedded TiNiCu alloy wires
974
Thermal response of glass fibre/epoxy composites with embedded TiNiCu alloy wires
975
Thermal response of glass fibre/epoxy composites with embedded TiNiCu alloy wires
976
Thermal response of grain boundaries in graphene sheets under shear strain from atomistic simulations
977
Thermal response of Iapetus to an eclipse by Saturnʹs rings
978
Thermal response of plasma sprayed tungsten coating to high heat flux
979
Thermal response of soil microbial respiration is positively associated with labile carbon content and soil microbial activity
980
Thermal response of solar and conventional school buildings to design- and human-driven factors
981
Thermal response of structured and contaminated carbon surfaces to heat pulses
982
Thermal response of two-layer systems:: Numerical simulation and experimental validation
983
Thermal response simulation for tuning PID controllers in a 1016 mm guarded hot plate apparatus
984
Thermal response to heat fluxes of the W7-AS divertor surface submitted to surface modification under high temperature treatment
985
Thermal Response with Exothermic Effects of β2-Microglobulin Amyloid Fibrils and Fibrillation
986
Thermal responses to different residential environments in Harbin
987
Thermal responsive hydrogels based on semi interpenetrating network of poly(NIPAm) and cellulose nanowhiskers
988
Thermal reversibility and bistability in photochromic diarylethenes
989
Thermal reversibility in crystalline morphology of LLDPE crystallites
990
Thermal ring-opening reaction of N-polynitromethyl tetrazoles: facile generation of nitrilimines and their reactivity
991
Thermal rise during photopolymerization and degree of conversion of bulk fill and conventional resin composites
992
Thermal road for fullerene annealing
993
Thermal Robustness of Signaling in Bacterial Chemotaxis
994
Thermal roughening restrained by bulk chemical order: Cu–Pd(17%)(1 1 5) versus Cu(1 1 5) and Cu3Au(1 1 12) surfaces
995
Thermal routes to metal complexed polyimines; facile conversion of CoX2(NH2CH2CH{OEt}2)2 to CoX2{=NCH2CH=}2
996
Thermal runaway and microwave heating in thin cylindrical domains
997
Thermal runaway for a reaction–diffusion equation
998
Thermal runaway in microwave heating: a mathematical analysis
999
Thermal runaway in valve-regulated lead-acid cells and the effect of separator structure
1000
Thermal runaway in VRLAB—Phenomena, reaction mechanisms and monitoring
