بر اساس عنوان

1
Influence of acute hypoxia on cardiovascular variability and striatal dopamine in conscious hypertensive rats
2
Influence of acute myocardial infarction location on in-hospital and late outcome after primary percutaneous transluminal coronary angioplasty versus tissue plasminogen activator therapy
3
Influence of acute progressive hypoxia on cardiovascular variability in conscious spontaneously hypertensive rats
4
Influence of acyl chain length on the enantioselectivity of Candida antarctica lipase B and its thermodynamic components in kinetic resolution of sec-alcohols
5
Influence of ADAM28 on biological characteristics of human dental follicle cells
6
Influence of adaptive control on vortex-driven instabilities in a scaled model of solid propellant motors
7
Influence of adaptive statistical iterative reconstruction algorithm on image quality in coronary computed tomography angiography
8
Influence of added bean flour (Phaseolus vulgaris L.) on some physical and nutritional properties of wheat flour tortillas
9
Influence of added concrete compressive strength on adhesion to an existing concrete substrate
10
Influence of added hydrogen bonding agents on the chiroptical properties of chiral polyaniline
11
Influence of added microbial enzymes on energy and protein availability of selected feed ingredients
12
Influence of added potassium and sodium carbonates on CO2 reactivity of the char from a demineralized inertinite rich bituminous coal
13
Influence of added potassium and sodium carbonates on CO2 reactivity of the char from a demineralized inertinite rich bituminous coal
14
Influence of added salt and non-muscle proteins on the rheology and ultrastructure of gels made from minced flesh of sardine (Sardina pilchardus)
15
Influence of Added Vitamin C and Vitamin E on Frozen-Thawed Bovine Sperm Cryopreserved in Citrate and Tris-Based Extenders
16
Influence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
17
Influence of Adding Inulin as a Fat Replacer on the Characteristics of Yoghurt
18
Influence of Adding Nanoparticles of Silver Vanadate on Antibacterial Effect and Physicochemical Properties of Endodontic Sealers
19
Influence of adding or deleting items and sources on the h-index
20
Influence of adding salt on ultrasonic atomization in an ethanol–water solution
21
Influence of adding salt on ultrasonic atomization in an ethanol–water solution
22
Influence of adding Sea Spaghetti seaweed and replacing the animal fat with olive oil or a konjac gel on pork meat batter gelation. Potential protein/alginate association
23
Influence of Adding SiC on Microstructure and Electrical Properties of ZnO-based Nanocomposite Varistor
24
Influence of adding various rare earths on microstructures and corrosion resistance of chromizing coatings prepared via pack cementation on P110 steel
25
Influence of adding waste polyethylene terephthalate plastic strips on uniaxial compressive and tensile strength of cohesive soil
26
Influence of addition dune sand powder to cement, on the properties physical-mechanical and deformability of concrete
27
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel
28
Influence of addition of ammonium and different amino acid concentrations on nitrogen metabolism in spontaneous must fermentation
29
Influence of addition of copper cadmium ferrite on the dielectric and electrical behavior of BaSrTiO3 ceramics
30
INFLUENCE OF ADDITION OF DIFFERENT TYPES OF SUGAR AND LEAVENING AGENTS ON THE ACRYLAMIDE CONTENT IN BISCUITS
31
Influence of addition of motility stimulators in cryopreservation of sperm from subfertile stallions
32
Influence of addition of pure components on the structural state of multi-n-alkane mixtures
33
Influence of addition of tantalum oxide on electrochemical capacitor performance of molybdenum nitride
34
Influence of addition of urea and its related compounds on formation of various neodymium and cerium phosphates
35
Influence of additional external pressure on optical emission intensity in liquid-phase laser ablation
36
Influence of Additional Partition on the Recovery of Atrial Function After Atrial Compartment Operation for Atrial Fibrillation
37
Influence of additions of coal fly ash and quartz on hydrothermal solidification of blast furnace slag
38
Influence of additive content on the anisotropy in hot-pressed Si3N4 ceramics using grain orientation measurements
39
Influence of additive elements on the terminal solid solubility of hydrogen for Zirconium alloy
40
Influence of additive noise on noise-induced phase transitions in nonlinear chains
41
Influence of additive on nanocrystalline, bright Zn–Fe alloy electrodeposition and its properties
42
Influence of additives and cation chain length on the kinetic stability of supersaturated catanionic systems
43
Influence of Additives and Fermentation Periods on Silage Characteristics, Chemical Composition, and In Situ Digestion Kinetics of Jambo Silage and Its Fodder in Nili Buffalo Bulls
44
Influence of additives and post-synthesis treatment on the structural properties of sol–gel prepared alumina-doped zirconia studied by EXAFS-spectroscopy and X-ray diffraction
45
Influence of additives blended with motor base oils on the braking torque under an auxiliary external DC electric field
46
Influence of additives content on the high temperature oxidation of silicon nitride based composites
47
Influence of additives of various origins on thermoplastic properties of coal
48
Influence of additives on adhesion of Penicillium frequentans conidia to peach fruit surfaces and relationship to the biocontrol of brown rot caused by Monilinia laxa
49
Influence of additives on anisotropic grain growth in silicon nitride ceramics
50
Influence of additives on corrosion resistance and corroded microstructures of MgO–C refractories
51
Influence of additives on density, microstructure and mechanical properties of alumina
52
Influence of Additives on Fabrication and Release from Protein Loaded Microparticles
53
Influence of additives on microstructural changes in nitride bonded SiC refractories
54
Influence of additives on microstructure and property of microarc oxidized Mg–Si–O coatings
55
Influence of additives on nano-SiC whisker formation in alumina silicate–SiC–C monolithic refractories
56
Influence of additives on properties of sol–gel layers
57
Influence of additives on rheological characteristics of whole-wheat dough and quality of Chapatti (Indian unleavened Flat bread) Part I—hydrocolloids
58
Influence of additives on Saccharomyces cerevisiae β-glucan production
59
Influence of additives on the clouding phenomenon of chlorpromazine hydrochloride solutions
60
Influence of additives on the corrosion rate and oxygen overpotential of Pb–Co3O4, Pb–Ca–Sn and Pb–Sb anodes for copper electrowinning: Part II
61
Influence of additives on the global mechanical behavior and the microscopic strain localization in wood reinforced polypropylene composites during tensile deformation investigated using digital image correlation
62
Influence of additives on the impact toughness of Al–10.8% Si near-eutectic cast alloys
63
Influence of additives on the magnetic properties, microstructure and densification of Mn–Zn soft ferrites
64
Influence of additives on the microstructure and tensile properties of near-eutectic Al–10.8%Si cast alloy
65
Influence of additives on the precipitation of gypsum in sodium chloride solutions Original Research Article
66
Influence of additives on the properties of Bis-GMA/Bis-GMA analog comonomers and corresponding copolymers
67
Influence of additives on the Pt metal activity of naphtha reforming catalysts Original Research Article
68
Influence of additives on the water uptake of hydrosilanized silicone rubbers
69
Influence of additives on thermal conductivity of shape-stabilized phase change material
70
Influence of adherend’s delamination on the response of single lap and socket tubular adhesively bonded joints subjected to torsion
71
Influence of adhesion of silica and ceria abrasive nanoparticles on Chemical–Mechanical Planarization of silica surfaces
72
Influence of Adhesion Surface, Restoration Thickness and Type on Stress Distribution in Anterior Laminate Veneers: A Finite Element Analysis Study
73
Influence of adhesive bond line thickness on joint strength
74
Influence of adhesive characteristics on the transverse free vibration of single lap-jointed cantilevered beams
75
Influence of adhesive spew in bonded single-lap joints
76
Influence of adhesive thickness and filler content on the mechanical performance of aluminum single-lap joints bonded with aluminum powder filled epoxy adhesive
77
Influence of adhesive thickness on high velocity impact performance of ceramic/metal composite targets
78
Influence of adhesive thickness on local interface fracture and overall strength of metallic adhesive bonding structures
79
Influence of adhesive thickness on the behaviour of bonded assemblies under shear loadings using a modified TAST fixture
80
Influence of adiabatic shear bands intersection on the ballistic impact of Ti–6Al–4V alloys with three microstructures
81
Influence of adjuvant tamoxifen treatment on bone mineral density and bone turnover markers in postmenopausal breast cancer patients in Japan
82
Influence of admission and discharge aspirin use on survival after primary coronary angioplasty for acute myocardial infarction
83
Influence of admixtures on the cracking sensitivity of mortar layers applied to a mineral substrate
84
Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions
85
Influence of Adolescents’ Physical Activity on Bone Mineral Acquisition: A Systematic Review Article
86
Influence of Adolescents’ Physical Activity on Bone Mineral Acquisition: A Systematic Review Article
87
Influence of adsorbates on the segregation properties of Au–Pd bimetallic clusters
88
Influence of adsorbed crude oil on NMR relaxation of water in saturated silica sand
89
Influence of adsorbed crude oil on NMR relaxation of water in saturated silica sand
90
Influence of adsorbed particles on streaming potential of mica
91
Influence of adsorbed polysaccharides and polyacrylamides on talc flotation
92
Influence of Adsorbent and Ion Exchange Resin Applications on Mineral Contents of Grape Pekmez (Molasses)
93
Influence of adsorbent particles on a dynamic protein membrane in cross flow filtration Original Research Article
94
Influence of adsorption and concentration polarisation on membrane performance during ultrafiltration of a non-ionic surfactant Original Research Article
95
Influence of adsorption and desorption capacity on operating process for adsorption heat pump
96
Influence of Adsorption and Desorption of Gas Micronuclei on the Nature of the Flow of a Gassy Liquid through a Porous Medium
97
Influence of adsorption cycle limitations on the system performance
98
Influence of adsorption kinetics and bubble motion on stability of the foam films formed at n-octanol, n-hexanol and n-butanol solution surface
99
Influence of adsorption of reactants on preparation of silver nanoparticles by adsorption phase synthesis
100
Influence of adsorption on calibration curves in normal pulse polarography
101
Influence of adsorption on photoinduced electron transfer in supported liquid membranes: the case of C60
102
Influence of adsorption on the diffusion selectivity for mixture permeation across mesoporous membranes
103
Influence of adsorption on the photocatalytic properties of TiO2/AC composite materials in the acetone and cyclohexane vapor photooxidation reactions
104
Influence of adsorption on the photodegradation of various dyes using surface bond-conjugated TiO2/SiO2 photocatalyst
105
Influence of adsorption parameters on catalytic cracking and catalyst decay
106
Influence of adsorption processes on the CO2 electroreduction: An electrochemical mass spectrometry study
107
Influence of adult Anguillicoloides crassus load in European eels swimbladder on macrophage response
108
Influence of Adult Food Deprivation and Body Size on Fecundity and Longevity ofTrichopoda giacomellii:A South American Parasitoid ofNezara viridula
109
Influence of advanced age on the blastocyst development rate and pregnancy rate in assisted reproductive technology
110
Influence of advanced electromyogram (EMG) amplitude processors on EMG-to-torque estimation during constant-posture, force-varying contractions
111
Influence of Advancing Age on Fractionated Right Atrial Endocardial Electrograms
112
Influence of advection on scales of ecological studies in a coastal equilibrium flow
113
Influence of adverse pressure gradient on rough-wall turbulent flows
114
Influence of Advertising Texts on Speech Culture of Children and Teenagers
115
Influence of aeration and sludge retention time on ammonium oxidation to nitrite and nitrate
116
Influence of aeration conditions on physical and sensory properties of aerated cake batter and biscuits Original Research Article
117
Influence of aeration on bioethanol production from ozonized wheat straw hydrolysates using Pichia stipitis
118
Influence of aeration on microbial polymers and membrane fouling in submerged membrane bioreactors
119
Influence of aeration on the production and the quality of the exopolysaccharides from Paecilomyces tenuipes C240 in a stirred-tank fermenter
120
Influence of aeration rate and biodegradability fractionation on composting kinetics
121
Influence of aeration rate on nitrogen dynamics during composting
122
Influence of aerobic and anaerobic microorganisms from diesel oil on mild steel
123
Influence of aerobic and anoxic microenvironments on polyhydroxyalkanoates (PHA) production from food waste and acidogenic effluents using aerobic consortia
124
Influence of Aerobic Training on Cardiovascular and Metabolic Parameters in Elderly Hypertensive Women
125
Influence of aerobic training on red cell antioxidants defense, plasma malondialdehyde capacity in patients multiple sclerosis
126
INFLUENCE OF AEROBIC TREADMILL EXERCISE ON BLOOD GLUCOSE HOMEOSTASIS AND LIPID PROFILE IN OBESE TYPE-II DIABETICS MELLITUS
127
Influence of aero-optical transmission on infrared imaging optical system in the supersonic flight
128
Influence of aerosol composition on visibility in megacity Delhi
129
Influence of aerosol concentration on precipitation formation in low-level, warm stratiform clouds
130
Influence of aerosol distribution on solar UV flux on the surface
131
Influence of aerosol formation mechanism by an ultrasonic field on particle size distribution of ceramic powders
132
Influence of aerosol formation mechanism by an ultrasonic field on particle size distribution of ceramic powders
133
Influence of aerosol hygroscopic growth parameterization on aerosol optical depth and direct radiative forcing over East Asia
134
Influence of aerosol multiple scattering of ultraviolet radiation on martian atmospheric sensing
135
Influence of aerosols pollution on the amount of collectable solar energy
136
Influence of aesthetic dental and facial measurements on patient satisfaction between genders in Indian patients
137
Influence of aesthetic perception on visual event-related potentials
138
Influence of afforestation on soil: The case of mineral weathering
139
Influence of AFM Tip Temperature on THF Hydrate Stability:Theoretical Model and Numerical Simulation
140
Influence of African dust on the levels of atmospheric particulates in the Canary Islands air quality network
141
INFLUENCE OF AFTERBODY AND BOUNDARY LAYER ON CAVITATING FLOW
142
Influence of Ag adsorbate on the Si( 111) - fi X &(Au, Cu) structure
143
Influence of Ag as alloy additive on the oxygen evolution reaction on Pb/PbO2 electrode
144
Influence of Ag content on mechanical and tribological behavior of DLC coatings
145
Influence of Ag doped graphene on electrochemical behaviors and specific capacitance of polypyrrole-based nanocomposites
146
Influence of Ag nanoparticles on luminescent performance of SiO2:Tb3 + nanomaterials
147
Influence of Ag, Sb, Bi and Zn impurities on electrochemical and flotation behaviour of galena
148
Influence of Ag/LDPE nanocomposite films on the microbial growth of Beluga (Huso huso) fillets during the refrigerated storage period
149
Influence of agar content on the growth parameters of Bacillus cereus
150
Influence of Agathi grandiflora active principles inhibit viral multiplication and stimulate immune system in Indian white shrimp Fenneropenaeus indicus against white spot syndrome virus infection
151
Influence of Ag-doping on the optical properties of ZnO films
152
Influence of age and cervical grade on anatomy, morphology and depth of cervical penetration in Sanjabi ewes
153
Influence of age and endometrial biopsy score on the expression of lactoferrin in the uterus of mares
154
Influence of age and Enterococcus faecium NCIMB 10415 on development of small intestinal digestive physiology in piglets
155
Influence of age and executive functioning on verbal memory of inpatients with depression
156
Influence of age and foaling on plasma protein electrophoresis and serum amyloid A and their possible role as markers of equine neonatal septicaemia
157
Influence of age and gender on association between -765G C COX-2 genetic polymorphism and gastric adenocarcinoma risk: A casecontrol study in Iran
158
Influence of Age and Gender on Emotional Skin Responses
159
Influence of age and gender on exercise training-induced blood pressure reduction in systemic hypertension
160
Influence of age and gender on the presence of coronary calcium detected by ultrafast computed tomography
161
Influence of age and gender on trigeminal sensory function and magnetically evoked masseteric exteroceptive suppression reflex
162
Influence of age and gender on triglycerides-to-HDL-cholesterol ratio (TG/HDL ratio) and its association with adiposity index
163
Influence of age and glucose ingestion on memory function
164
Influence of age and hypertension on the association between small artery compliance and coronary artery disease
165
Influence of age and juvenile hormone on brain dopamine level in male honeybee (Apis mellifera): Association with reproductive maturation
166
Influence of age and live body weight on daily milk yield of Zaraibi and Shami goats in Sinai, Egypt
167
Influence of age and mechanical stability on bone defect healing: Age reverses mechanical effects
168
Influence of age and menopausal status on pathologic and biologic features of breast cancer
169
Influence of age and normal plasma fibrinogen levels on flow-mediated dilation in healthy adults
170
Influence of age and osteoporosis on calcaneus trabecular bone structure: a preliminary in vivo MRI study by quantitative texture analysis
171
Influence of age and prior infarction on the clinical characteristics of patients with non-Q-wave myocardial infarction
172
Influence of Age and Renal Function on High-Sensitivity Cardiac Troponin T Diagnostic Accuracy for the Diagnosis of Acute Myocardial Infarction
173
Influence of age and sex on aortic distensibility assessed by MRI in healthy subjects
174
Influence of age and sex on serum osteocalcin concentrations in horses at weaning and during physical conditioning
175
Influence of age and sexual maturation on the expression of LH and FSH receptors and aromatase P450 in equine male reproductive tissues
176
Influence of age and treadmill running on motor performance in rats
177
Influence of age on activities of antioxidant enzymes and lipid peroxidation products in erythrocytes and neutrophils of down syndrome patients
178
Influence of age on assessment of diastolic function by Doppler tissue imaging
179
Influence of age on atrial activation as measured by the P-wave signal-averaged electrocardiogram
180
Influence of age on bronchoscopic findings in healthy beagle dogs
181
Influence of age on cervicothoracic spinal curvature: An ex vivo radiographic survey
182
Influence of age on clinical course, management and mortality of acute myocardial infarction in the Spanish population
183
Influence of age on clinical presentation of acute pulmonary embolism
184
Influence of age on dark respiration in eucalypts
185
Influence of age on Henoch Schonlein purpura
186
Influence of age on medicare expenditure and medical care in the lat year of life.
187
Influence of age on metabolism of testosterone, dihydrotestosterone, and 3-α-androstanediol in muscle biopsies from patients with neuromuscular diseases
188
Influence of age on outcome after percutaneous transluminal coronary angioplasty
189
Influence of age on outcomes in patients undergoing mitral valve replacement
190
Influence of Age on Perception of Best Esthetical Profile
191
Influence of Age on Revascularization Related Costs of Hospitalization Among Patients of Stable Coronary Artery Disease
192
Influence of age on scapulo-thoracic orientation
193
Influence of age on surgical treatment of peripheral cholangiocarcinoma
194
Influence of age on symptoms and laboratory findings at presentation in patients with influenza-associated pneumonia
195
Influence of age on the apparent metabolisable energy and total tract apparent fat digestibility of different fat sources for broiler chickens
196
Influence of age on the development of immunological lung response in intrauterine undernourishment
197
Influence of age on the effect of bidirectional cavopulmonary anastomosis on left ventricular volume, mass and ejection fraction
198
Influence of age on the efficacy of electroconvulsive therapy in major depression: A retrospective study
199
Influence of age on the efficacy of electroconvulsive therapy in major depression: A retrospective study
200
Influence of age on the electrophysiological mechanism of paroxysmal supraventricular tachycardias
201
Influence of age on the prognostic importance of left ventricular dysfunction and congestive heart failure on long-term survival after acute myocardial infarction
202
Influence of age on the relationship between annual changes in horn growth rate and prolactin secretion in the European mouflon (Ovis gmelini musimon)
203
Influence of Age on the Release of Reactive Oxygen Species by Phagocytes as Measured by a Whole Blood Chemiluminescence Assay
204
Influence of Age on the Survival and Mortality Rate in Acute Caustic Poisonings
205
Influence of age on the usage of family planning methods by Turkish married men living in southeastern Turkey
206
Influence of Age on Use of Cardiac Catheterization and Associated Outcomes in Patients With Non-ST-Elevation Acute Coronary Syndromes
207
Influence of age, diagnosis, and cycle number on pregnancy rates with gonadotropin-induced controlled ovarian hyperstimulation and intrauterine insemination
208
Influence of Age, Farming Site, and Boiling on Pro-Vitamin A Content in Sweet Potato (Ipomoea batatas(L.) Lam.) Storage Roots
209
Influence of age, gender, and race on depression in heart failure patients
210
Influence of age, gender, and serum triglycerides on heart rate in a cohort of asymptomatic individuals without heart disease
211
Influence of age, gender, body mass index, and functional capacity on heart rate variability in a cohort of subjects without heart disease
212
Influence of age, gender, educational level and self-estimation of skin type on sun exposure habits and readiness to increase sun protection
213
Influence of Age, Obesity, Smoking, Sleep duration, and Sleep Quality on Concentration, Morphology, and Sperm Motility: A Cross-Sectional Study
214
Influence of age, risk factors, and cardiovascular and renal disease on arterial stiffness: clinical applications
215
Influence of age, sex and body condition on zinc, copper, cadmium and metallothioneins in common guillemots (Uria aalge) stranded at the Belgian coast
216
Influence of age, sex, and atrial fibrillation recurrence on quality of life outcomes in a population of patients with new-onset atrial fibrillation: The Fibrillation Registry Assessing Costs, Therapies, Adverse events and Lifestyle (FRACTAL) study
217
Influence of ageing after pre-deformation on shape memory effect in a FeMnSiCrNiC alloy with 13 wt.% Cr content
218
Influence of Ageing and Abscisic Acid on Potassium Uptake by Potato Tuber Tissues
219
Influence of ageing heat treatment on alloy A-286 microstructure and stress corrosion cracking behaviour in PWR primary water
220
Influence of ageing of residues on the availability of herbicides for leaching
221
Influence of ageing on cyclic deformation behavior and residual stress relaxation of deep rolled as-quenched aluminium alloy AA6110
222
Influence of ageing on lees on polysaccharide glycosyl-residue composition of Chardonnay wine
223
Influence of ageing on lees on polysaccharide glycosyl-residue composition of Chardonnay wine
224
Influence of ageing on the dynamic behaviour and the electrochemical characteristics of a 500 We PEMFC stack
225
Influence of ageing on the internal friction of magnesium
226
Influence of ageing on the quasistatic fracture toughness of an SS 316(N) weld at ambient and elevated temperatures
227
Influence of ageing on wear resistance of an Fe–Mn–Si–Cr–Ni–Ti–C shape memory alloy
228
Influence of ageing on zinc bioavailability in soils
229
Influence of ageing process on porosity changes of the external plasters
230
Influence of ageing temperature and heating rate on the properties and microstructure of β Ti alloy, Ti–6Cr–5Mo–5V–4Al
231
Influence of ageing treatment on microstructure, mechanical and bio-corrosion properties of Mg–Dy alloys
232
Influence of age-related maculopathy on viual functioning and health-related quality of life Original Reearch Article
233
Influence of Age-Related Versus Non–Age-Related Renal Dysfunction on Survival in Patients With Left Ventricular Dysfunction
234
Influence of age-specific lung function on survival after coronary bypass
235
Influence of agglomeration of a recycled cement additive on the hydration and microstructure development of cement based materials
236
Influence of agglomeration on physical characteristics and oxidative stability of spray-dried oil powder with milk protein and trehalose wall material Original Research Article
237
Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)
238
Influence of aggregate content on the behavior of fly ash based geopolymer concrete
239
Influence of aggregate content on the migration coefficient of concrete materials using electrochemical method
240
Influence of aggregate deformation and contact behaviour on discrete particle modelling of fracture of concrete
241
Influence of aggregate fraction in the mix on the reliability of the rapid chloride permeability test
242
Influence of aggregate fraction in the mix on the reliability of the rapid chloride permeability test
243
Influence of aggregate materials characteristics on the drying shrinkage properties of mortar and concrete
244
Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete
245
Influence of aggregate shapes on drying and carbonation phenomena in 3D concrete numerical samples
246
Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar
247
Influence of aggregate size on phosphorus changes in a soil cultivated intermittently: analysis by 31P nuclear magnetic resonance
248
Influence of aggregate size on phosphorus loss and ryegrass yield in a soil cultivated intermittently
249
Influence of aggregate size on the compressive size effect according to different concrete types
250
Influence of aggregate stemming in blasting on the SAG mill performance
251
Influence of aggregate surface roughness on mechanical properties of interface and concrete
252
Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars
253
Influence of aggregates on chloride diffusion coefficient into mortar
254
Influence of aggregation on the optical spectra of a polymethine dye in single crystals Original Research Article
255
Influence of aggressive exposure conditions on the behaviour of adhesive bonded concrete–GFRP joints
256
Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment
257
Influence of Agility Dynamics on Motor Control and Development Capacities
258
Influence of aging and composition of the precursor sol on the properties of CeO2–TiO2 thin films for electrochromic applications
259
Influence of aging and long-term caloric restriction on oxygen radical generation and oxidative DNA damage in rat liver mitochondria
260
Influence of aging and long-term swimming exercise on parvalbumin distribution in rat hearts
261
Influence of aging atmosphere on the superelastic behavior of Ni50.9–Ti shape memory thin wires
262
Influence of aging behavior of Armos fiber after oxygen plasma treatment on its composite interfacial properties
263
Influence of aging effects on the conversion efficiency of automotive exhaust gas catalysts
264
Influence of aging on cortical activity associated with a visuo-motor task
265
Influence of Aging on Gastrointestinal Transit Time An Ultrasonographic Radiologic Study
266
Influence of aging on phosphorus sorption to alum floc in lake water
267
Influence of aging on quench sensitivity effect of 7055 aluminum alloy
268
Influence of aging on structure and thermal conductivity of Y-PSZ and Y-FSZ EB-PVD coatings
269
Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen
270
Influence of aging on the seasonal rhythm of the vasopressin-expressing neurons in the human suprachiasmatic nucleus
271
Influence of aging on the technological properties of clays in the ceramic industry
272
Influence of aging on thromboxane A2 and prostacyclin levels in rat hippocampal brain slices
273
Influence of aging parameters on the mechanical properties of 6063 aluminium alloy
274
Influence of aging pre-treatment on the compressive deformation of WE54 alloy
275
Influence of aging temperature on corrosion behavior of Al–Zn–Mg–Sc–Zr alloy
276
Influence of Aging Temperature on Mechanical Properties and Sound Velocity in Maraging Steel M350
277
Influence of aging temperature on phase transformation and mechanical behavior of NiTi thin films deposited by magnetron sputtering technique
278
Influence of aging temperature, time, and environment on thermo-oxidative behavior of PMR-15: nanomechanical characterization
279
Influence of aging treatment on mechanical properties of 6061 aluminum alloy
280
Influence of aging treatment on microstructure, wear and corrosion behavior of a nickel base hardfaced coating
281
Influence of Aging Treatment on Precipitation Behavior of η Phase in Ni-Co-Cr Alloy Original Research Article
282
Influence of aging treatment on the bacterial quality of South African springbok (Antidorcas marsupialis marsupialis) wholesale cuts
283
Influence of aging treatments and alloying additives on the hardness of Al–11Si–2.5Cu–Mg alloys
284
Influence of aging treatments on microstructure and electrochemical properties in Mg–8.8Hg–8Ga (wt%) alloy
285
Influence of agitation, inoculum density, pH, and strain on the growth parameters of Escherichia coli O157:H7—relevance to risk assessment
286
Influence of Agricultural Crops and Fertilization on Microbial Activity and Microorganisms in the Rhizosphere
287
Influence of agricultural factors on weed, carabid and bird richness in a Mediterranean cereal cropping system
288
Influence of agricultural intensification on the earthworm community in arable farmland in the North China Plain
289
Influence of agricultural land management on organic matter content, microbial activity and aggregate stability in the profiles of two Oxisols
290
Influence of agricultural management on soil organic carbon: A compendium and assessment of Canadian studies
291
Influence of agricultural practice on trace metals in soils and vegetation in the water conservation area along the East River (Dongjiang River), South China Original Research Article
292
Influence of agricultural practices on arthropod communities in a vertisol (Martinique)
293
Influence of agricultural practices on soil microbial activity measured by microcalorimetry
294
Influence of Agricultural Wastes and Incubation Period on Aggregate Stability in Sandy Soil
295
Influence of Agrobacterium rhizogenes strains on hairy roots induction in Trigonella foenum-graecum L. and secondary metabolites production
296
INFLUENCE OF AGRO-CLIMATIC CONDITIONS ON FRUIT YIELD AND OIL CONTENT OF OLIVE CULTIVARS
297
Influence of agronomic practices, local environment and landscape structure on predatory beetle assemblage
298
Influence of agrotechnical factors on the structure and seed yield of white clover (Trifolium repens L.)
299
Influence of Ag–S codoping on silver chemical states and stable p-type conduction behavior of the ZnO films
300
Influence of air annealing on the structural, morphological, optical and electrical properties of chemically deposited ZnSe thin films
301
Influence of air annealing on the structural, optical and electrical properties of chemically deposited CdSe nano-crystallites
302
Influence of air bubble size on float–sink of spheres in a gas–solid fluidized bed
303
Influence of Air Bubbles in Seawater on the Formation of Lidar Returns
304
Influence of air conditioners utilization on urban thermal environment
305
Influence of air conditioning management on heat island in Paris air street temperatures
306
Influence of air electrode electrocatalysts on performance of air-MH cells
307
Influence of air entraining agents on deicing salt scaling resistance and transport properties of high-volume fly ash concrete
308
Influence of air entrainment on the liquid flow field caused by a plunging jet and consequences for fibre deposition
309
Influence of air exposure on CsI photocathodes
310
Influence of air exposure on CsI photocathodes
311
Influence of air flow rate on emission of DEHP from vinyl flooring in the emission cell FLEC: Measurements and CFD simulation
312
Influence of air humidity and the distance from the source on negative air ion concentration in indoor air
313
Influence of air layers and damping layers between gypsum boards on sound transmission
314
Influence of air mass origin on the wet deposition of nitrogen to Tampa Bay, Florida—An eight-year study
315
Influence of air mass source region on nanoparticle events and hygroscopicity in central Virginia, U.S.
316
Influence of air mass trajectories on the chemical composition of precipitation in India
317
Influence of air on polybutadiene used in the preparation of stationary phases for high-performance liquid chromatography
318
Influence of air oxidation on the properties of decorative NbOxNy coatings prepared by reactive gas pulsing
319
Influence of Air Pollutants in the 7Be Size Distribution of Atmospheric Aerosols
320
Influence of air pollution on leaf chemistry, herbivore feeding and gall frequency on Tibouchina pulchra leaves in Cubatão (Brazil)
321
Influence of air pollution on seed quality of Picea obovata
322
Influence of air pollution on the foliar nutrition of conifers in Great Britain Original Research Article
323
Influence of air pollution on the nutritional status of Navarraʹs Forests, Spain
324
Influence of air porosity on distribution of gases in soil under assay for denitrification
325
Influence of air recycling on the performance of a continuous rotary dryer for vegetable wholesale by-products Original Research Article
326
Influence of Air SO2 Pollution on Antioxidant Systems of Alfalfa Inoculated with Rhizobium.
327
Influence of air temperature on drying kinetics and antioxidant potential of olive pomace Original Research Article
328
Influence of Air Temperature on the Release of Ascospores of Venturia inaequalis
329
Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin
330
Influence of airborne particles on the acidity of rainwater during wash-out process
331
Influence of air-cooled slag on physicochemical properties of autoclaved aerated concrete
332
Influence of air-deck blasting on fragmentation in jointed rocks in an open-pit manganese mine
333
Influence of air-drying temperature on drying kinetics, colour, firmness and biochemical characteristics of Atlantic salmon (Salmo salar L.) fillets
334
Influence of airflow and liquid properties on the mass transfer coefficient of ammonia in aqueous solutions
335
Influence of airflow intensity on phytase production by solid-state fermentation
336
Influence of airflow velocity on kinetics of convection apple drying Original Research Article
337
Influence of Air-Gap Length on CO2 Stripping from Diethanolamine Solution and Water Performance of Surface Modified PVDF Hollow Fiber Membrane Contactor
338
Influence of Air-Knife Wiping on Coating Thickness in Hot-Dip Galvanizing Original Research Article
339
Influence of airmass back trajectory upon nitrogen compound composition
340
Influence of Al addition on the corrosion resistance and magnetic properties of FeZrNbBCu alloy
341
Influence of Al addition on the products of self-propagating high-temperature synthesis of Al–Ti–Si system
342
Influence of Al admixtures on the crystal structure and the magnetic properties of 3d transition metal alloys
343
Influence of Al concentration on the short-range and long-range diffusion of carbon in Fe–Al alloys
344
Influence of Al content on microstructure and optical transmittance of sol-gel dip-coated ZnO films
345
Influence of Al content on the mechanical properties and thermal stability in protective and oxidation atmospheres of Zr–Cr–Al–N coatings
346
Influence of Al declustering on the photoluminescent properties of Pr3 + ions in PbO–SiO2 glasses
347
Influence of AL Dust Particles on Air Plasma Characteristics in Cathode Sheath
348
Influence of Al film deposition and following treatment on the high temperature isothermal oxidation behavior of a γ-TiAl-based alloy
349
Influence of Al on the microstructure and carburization performance of a N-based alloy coating
350
Influence of Al on the microstructure and mechanical properties of Cr–Zr–(Al–)N coatings with low and high Zr content
351
Influence of Al(Er) interlayer on the mechanical properties of AlN(Er) coatings
352
Influence of Al2O3 addition on the ablation behavior of SiC coatings fabricated on C/C composites
353
Influence of Al2O3 addition on the properties of Bi2O3–BaO–SiO2–RxOy (R = K, Zn, etc.) glass sealant
354
Influence of Al2O3 addition on thermal and structural properties of erbium doped glasses
355
Influence of Al2O3 Additive on Mechanical Properties of Wollastonite Glass-Ceramics
356
Influence of Al2O3 layer thickness on high-temperature stability of TiAlN/Al2O3 multilayers
357
Influence of Al2O3 nano-dispersions on microstructure features and mechanical properties of cast and T6 heat-treated Al Si hypoeutectic Alloys
358
Influence of Al2O3 nanoparticles on solubility extension of Cr in Cu by mechanical alloying Original Research Article
359
Influence of Al2O3 on the performance of CeO2 used as catalyst in the direct carboxylation of methanol to dimethylcarbonate and the elucidation of the reaction mechanism
360
Influence of Al2O3 or ZrO2 particulate addition on the microstructure aspects of AlNi and AlSi alloys
361
Influence of Al2O3 particles on the microstructure and mechanical properties of copper surface composites fabricated by friction stir processing
362
Influence of Al2O3 particulate on the aging response of A356 Al-based composites
363
Influence of Al2O3 reinforcement on precipitation kinetic of Cu–Cr nanocomposite
364
Influence of Al2O3 reinforcement on the abrasive wear characteristic of Al2O3/PA1010 composite coatings
365
Influence of Al2O3 whisker concentration on flexural strength of Al2O3(w)–ZrO2 (TZ-3Y) composite
366
Influence of Al2O3/CeZrAl composition on the catalytic behavior of Pd/Rh catalyst
367
Influence of Al2O3/MoS2 hybrid nanofluid MQL technique on cutting forces and surface roughness in hard turning using CBN inserts
368
Influence of Al2O3–Y2O3 and Ce–Al–Ni amorphous alloy on physical properties of laser synthetic composite coatings on titanium alloys
369
Influence of Al3+ insertion in the stannosilicate MFI framework on the catalytic performance in vapor phase aniline N-methylation Original Research Article
370
Influence of Al7Cu2Fe intermetallic particles on the localized corrosion of high strength aluminum alloys
371
Influence of Ala54Thr polymorphism of fatty acid–binding protein-2 on clinical results of biliopancreatic diversion
372
Influence of Al–Al2O3 composite powder on the matrix microstructure in composite casts
373
Influence of alanine uptake on Staphylococcus aureus surface charge and its susceptibility to two cationic antibacterial agents, nisin and low molecular weight chitosan
374
Influence of AlB2 compound on elimination of incoherent precipitation in artificial aging of wires drawn from redraw rod extruded from billets cast of alloy AA-6101 by vertical direct chill casting
375
Influence of Albocarbon-cyclic Hybridization on Biomedical Activities: A review
376
Influence of albumin and inorganic ions on electrochemical corrosion behavior of plasma electrolytic oxidation coated magnesium for surgical implants
377
Influence of albumin on the tribological behavior of Ag–Ti (C, N) thin films for orthopedic implants
378
Influence of AlCl3 on the optical properties of new synthesized 3-armed poly(methyl methacrylate) films
379
Influence of alcohol addition on gas hold-up in bubble columns: Development of a scale up model
380
Influence of alcohol addition on properties of bio-oil produced from fast pyrolysis of eucalyptus bark in a free-fall reactor
381
Influence of alcohol concentration on lipase-catalyzed enantioselective esterification of racemic naproxen in isooctane: under controlled water activity☆
382
Influence of Alcohol Dehydrogenase 1C Polymorphism on the Alcohol—Cardiovascular Disease Association (from the Framingham Offspring Study)
383
Influence of alcohol on antimicrobial immunity
384
Influence of Alcohol on Electrophysiological Responses to Facial Stimuli
385
Influence of alcohol solvents on characters of VOHPO4·0.5H2O prepared from V4O9 and ortho-H3PO4 Original Research Article
386
Influence of alcohol treatments on the activity of lipases immobilized on methyl-modified silica aerogels
387
Influence of alcoholic and malolactic starter cultures on bioactive amines in Merlot wines
388
Influence of alcoholic modifiers on the selectivity of the separation of a group of polycyclic aromatic hydrocarbons by micellar liquid chromatography
389
Influence of alcohols and osmolytes on thermal stability and catalytic activity of myoglobin: Co-solvent clustering effects
390
Influence of alcohols on the critical micelle concentration of non-aqueous micellar solutions
391
Influence of alcohols on the extraction of cerium(IV) by Aliquat-336 in kerosene
392
Influence of aldehyde groups on the thermostability of an immobilized enzyme on an inorganic support
393
Influence of alemtuzumab on the intestinal Paneth cells and microflora in macaques
394
Influence of alfalfa grazing-based feeding systems on carcass fat colour and meat quality of light lambs
395
Influence of alfalfa powder concentration and granularity on rheological properties of alfalfa-wheat dough Original Research Article
396
Influence of algal and bacterial particulate organic matter on benzo[a]pyrene bioaccumulation in Daphnia magna
397
Influence of Algal Farming on Fish Assemblages
398
Influence of AlGaN/GaN superlattice inserted structure on the performance of InGaN/GaN multiple quantum well light emitting diodes
399
Influence of alginate emulsion-based films structure on its barrier properties and on the protection of microencapsulated aroma compound
400
Influence of alginate, pH and ultrasound treatment on palm oil-in-water emulsions stabilized by β-lactoglobulin
401
Influence of alimentary habits, age and occupation on polychlorinated biphenyl levels in adipose tissue
402
Influence of aliphatic acids on the phase transition of thermoresponsive hyperbranched polymer
403
Influence of aliphatic spacer group on adsorption mechanisms of phosphonate derivatives of l-phenylalanine: Surface-enhanced Raman, Raman, and infrared studies
404
Influence of alkali additives on activity and toxicity of H2S and thiophene over a Ni/SiO2 catalyst Original Research Article
405
Influence of alkali and alkali-earth metal oxide substitutions on the properties of lithium–iron–phosphate glasses
406
Influence of Alkali Cations (Me = Li, Na, K, Rb, Cs) on Physico-chemical Properties of the Liquid and Solid Phases of Me-aluminosilicate Hydrogels
407
Influence of alkali cations on permeation properties of Y-type zeolite membranes
408
Influence of alkali coadsorption on hydrogen recombination at Cu(1 1 1)
409
Influence of alkali concentration on the deproteinization and/or gelatinization of rice starch
410
Influence of alkali metal counterions on the charging behavior of poly(acrylic acid)
411
Influence of alkali metal ions doping content on photoluminescence of (Y, Gd) BO3:Eu red phosphors under VUV excitation
412
Influence of alkali metal ions on the fracture properties of glass polyalkenoate (ionomer) cements
413
Influence of alkali metal modification and reaction conditions on the catalytic activity and stability of Ni containing smectite-type material for steam reforming of acetic acid
414
Influence of alkali metal salts on the processes of activation and oxidation of carbonaceous sorbents
415
Influence of alkali metallization (Li, Na and K) on photoluminescence properties of porous silicon
416
Influence of alkali metals on the kinetics of the thermal decomposition of biomass
417
Influence of alkali on restrained shrinkage behavior of cement-based materials
418
Influence of alkali promoters on synthetic diesel production over Co catalyst
419
Influence of alkali promotion on phenol hydrogenation activity of palladium/alumina catalysts Original Research Article
420
Influence of alkali silica reaction (ASR) on mechanical properties of mortar
421
Influence of alkali treatment and fibre length on mechanical properties of short Agave fibre reinforced epoxy composites
422
Influence of alkali-freezing treatment on the solid state structure of chitin
423
Influence of alkaline earth metals on the activity and sulfur stability of zeolites in the Nox−C3−C4 hydrocarbon selective reduction of no to nitrogen (SKV) process
424
Influence of alkaline earth oxides (R = Ca, Sr and Ba) on spectroscopic and dielectric studies of iron doped RO–Na2O–B2O3 glasses
425
Influence of alkaline extraction on the characteristics of humic substances in Brazilian soils
426
Influence of alkaline hydrothermal pretreatment on shrub wood Tamarix ramosissima: Characteristics of degraded lignin
427
Influence of alkaline metal on performance of supported silicotungstic acid catalysts in glycerol dehydration towards acrolein Original Research Article
428
Influence of alkalinity of the starting system on size and morphology of the zeolite A crystals
429
Influence of alkalinity, hardness and dissolved solids on drinking water taste: A case study of consumer satisfaction
430
Influence of alkalis on porosity percolation in hydrating cement pastes
431
Influence of alkaloid content on intake of subspecies of Chamaecytisus proliferus
432
Influence of alkaloids and oligosaccharides from white lupin seeds on utilization of diets by rats and absorption of nutrients in the small intestine
433
Influence of alkanediol series as processing additives in photo-active layer on the power conversion efficiency of polymer solar cells
434
Influence of alkoxy ligands on the Cp–Al bonding mode in [Cp2Al-μ-OR]2 from X-ray crystallographic and 27Al-NMR spectroscopic solution studies
435
Influence of alkoxy substituents on the exciton binding energy of conjugated polymers
436
Influence of alkoxy tail length on the phase behaviour of mesogen-jacketed liquid crystalline polymers with fan-shaped pendants
437
Influence of alkyl chain length and molecular weight on the surface functionalization via adsorption/entrapment with biocidal cationic block copolymers
438
Influence of alkyl dihalide gelators on solidification of dye-sensitized solar cells
439
Influence of alkyl group on amide nitrogen atom on fluorescence quenching of tyrosine amide and N-acetyltyrosine amide Original Research Article
440
Influence of alkyl length on properties of piezofluorochromic aggregation induced emission compounds derived from 9,10-bis[(N-alkylphenothiazin-3-yl)vinyl]anthracene
441
Influence of Alkyl Peptidoamines on the Structure of Functionalized Mesoporous Silica
442
Influence of alkylaminopyridine additives in electrolytes on dye-sensitized solar cell performance
443
Influence of alkylene spacer length on photoinduced molecular reorientation and LC alignment behavior in photo-cross-linkable liquid crystalline polymeric films with H-bonded cinnamic acid side groups
444
Influence of alkylpyridine additives in electrolyte solution on the performance of dye-sensitized solar cell
445
Influence of allochthonous input on autotrophic–heterotrophic switch-over in shallow waters of a tropical estuary (Cochin Estuary), India
446
Influence of allochthonous organic matter on bacterioplankton biomass and activity in a eutrophic, sub-tropical estuary
447
Influence of allosteric effectors on the kinetics and equilibrium binding of phosphoenolpyruvate (PEP) to phosphoenolpyruvate carboxylase (PEPC) from Zea mays Original Research Article
448
Influence of alloxan-induced diabetes and selenite treatment on blood glucose and glutathione levels in mice
449
Influence of alloy chemistry on microstructure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding (PTAW)
450
Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys Original Research Article
451
Influence of alloy composition and temperature on corrosion behavior of ODS ferritic steels
452
Influence of alloy elements and pouring temperature on the fluidity of cast magnesium alloy
453
Influence of Alloy Elements on Magnetic Properties of Fe-based Amorphous Alloys
454
Influence of alloyed Sc and Zr, and heat treatment on microstructures and stress corrosion cracking of Al–Zn–Mg–Cu alloys
455
Influence of alloying additions on the impurity induced grain boundary embrittlement
456
Influence of alloying and impurity element contents on V–Ti–Cr alloy properties
457
Influence of alloying effect on X-ray fluorescence parameters of Co and Cu in CoCuAg alloy films
458
Influence of alloying element additions on tribological behaviour of sintered steels with high content in manganese–nickel
459
Influence of alloying elements and density on aqueous corrosion behaviour of some sintered low alloy steels
460
Influence of alloying elements on as-cast microstructure and strength of gray iron
461
Influence of alloying elements on as-cast microstructure and strength of gray iron
462
Influence of alloying elements on as-cast microstructure and strength of gray iron
463
Influence of alloying elements on grain-growth in Zr(Fe) and Cu(Fe) thin-films under in situ ion-irradiation
464
Influence of Alloying Elements on Mechanical Properties and Corrosion Resistance of Cold Rolled C-Mn-Si TRIP Steels Original Research Article
465
Influence of alloying elements on phase stability and elastic properties of aluminum and magnesium studied by first principles
466
Influence of alloying elements on the corrosion properties of shape memory stainless steels
467
Influence of alloying elements on the corrosion stability of CoCrMo implant alloy in Hank’s solution
468
Influence of alloying elements on the mechanical properties of FeCo–V alloys
469
Influence of alloying elements on the microstructure evolution and mechanical properties in quenched and partitioned steels
470
Influence of alloying on the thermodynamic stability of FeAl B2 phase
471
Influence of alloying with bismuth on electrochemical behaviour of lead-calcium-tin grid alloys
472
Influence of AlN addition on thermal and mechanical properties of cordierite-based glass/ceramic composites
473
Influence of AlN interfacial layer on electrical properties of high-Al-content Al0.45Ga0.55N/GaN HEMT structure
474
Influence of AlN/GaN strained multi-layers on the threading dislocations in GaN films grown by alternate supply of metalorganics and NH3
475
Influence of Alnus subcordata, Populus deltoides and Taxodium distichum on Poor Drainage Soil, Northern Iran
476
Influence of Aloe vera Based Ascorbic Acid and Lactic Acid Edible Coatings on Quality and Shelf Life of Tomato
477
Influence of Aloe vera on water absorption and enzymatic in vitro degradation of alginate hydrogel films
478
Influence of AlOOH nanoparticles on the oxidation of iodide by persulphate
479
Influence of alpha lipoic acid on epithelial apoptosis in experimental periodontitis
480
Influence of alpha-case layer on the low cycle fatigue properties of Ti-6Al-2Sn-4Zr-2Mo alloy
481
Influence of Alpha-Lipoic Acid on Streptozotocin Induced Diabetic Cardiomyopathy in Adult Male Albino Rats: A Biochemical and Microscopical Study
482
Influence of alpine plants growing on steep slopes on sediment trapping and transport by runoff
483
Influence of Alq3/Au cathode on stability and efficiency of a layered organic solar cell in air
484
Influence of Altered Loading Conditions on Left Atrial Appendage Function In Vivo
485
Influence of altered solvent environment on the functionality of pigeonpea (Cajanus cajan) and cowpea (Vigna unguiculata) protein isolates
486
Influence of alternating sequential fraction on the melting and glass transition temperatures of ethylene–tetrafluoroethylene copolymer
487
Influence of alternating, direct and superimposed alternating and direct current on the corrosion of mild steel in marine environments Original Research Article
488
Influence of alternative alkali reagents on Fe removal during recovery of Mn as Electrolytic Manganese Dioxide (EMD) from Mn sludge
489
Influence of alternative dissolution models and subsurface heterogeneity on DNAPL disappearance times
490
Influence of Alternative Irrigation Applied Water on Water Productivity of Faba Bean (Vicia faba L.)
491
Influence of Alternatively and Classically Activated Macrophages on Fibrogenic Activities of Human Fibroblasts
492
Influence of altitude on the height of blue cone in a premixed flame
493
Influence of alumina addition on crystallization and texturing behavior of LaBGeO5 glass
494
Influence of alumina addition on grain growth and room temperature mechanical properties of 8YSCZ/Al2O3 composites
495
Influence of alumina dispersoid and test parameters on erosive wear behaviour of a cast zinc–aluminium alloy
496
Influence of alumina fluoridation on the dispersion and hydrotreating activity of WAl2O3 catalysis Original Research Article
497
Influence of alumina impurities on microstructure of LSM–CeO2 composites
498
Influence of Alumina Incorporated on MCM 41 Surface forMesoporous Characteristic and Methylene Blue Adsorption
499
Influence of alumina membrane on magnetic properties for thermally annealed CoPt alloy nanowires
500
Influence of alumina particle size on fracture toughness of (Y,Nb)-TZP/Al2O3 composites
501
Influence of alumina powder size on mechanical properties of in-situ coated alumina fiber-reinforced alumina composites
502
Influence of alumina substrates open porosity on calcium phosphates formation produced by the biomimetic method
503
Influence of aluminate coupling agent on low-temperature rheological performance of asphalt mastic
504
Influence of aluminide diffusion coating on low cycle fatigue properties of René 80
505
Influence of aluminide diffusion coating on the tensile properties of the Ni-base superalloy René 80
506
Influence of aluminium alloy type on dissimilar friction stir lap welding of aluminium to copper
507
Influence of Aluminium Chloride on Antioxidant System in the Testis and Epididymis of Rats
508
Influence of aluminium doping on the electrochemical behaviour of manganese dioxide
509
Influence of aluminium microstructure on corrosion and Corrosion inhibitor performance in acidic medium
510
Influence of aluminium on creep strength of 9–12% Cr steels
511
Influence of Aluminum Content on Mechanical Properties and Cold Workability of Fe-33Ni-15Co Alloy Original Research Article
512
Influence of aluminum doping on the properties of LiCoO2 and LiNi0.5Co0.5O2 oxides
513
Influence of aluminum ion implantation on oxidation behavior in air at 500 °C of TiN coatings
514
Influence of aluminum Lewis acids on the diastereoselectivity of the nickel-catalyzed [2+2+2] cycloaddition of norbornadiene and electron deficient alkenes
515
Influence of aluminum salt addition on in situ sintering of electrolyte matrices for molten carbonate fuel cells
516
Influence of Alyssum homolocarpum seed gum on the stability and flow properties of O/W emulsion prepared by high intensity ultrasound
517
Influence of AM Fungi, Glomus mosseae and Glomus intraradices on Chickpea Growth and Root-Rot Disease Caused by Fusarium solani f. sp. pisi under Greenhouse Conditions
518
Influence of amalgam fillings on Hg levels and total antioxidant activity in plasma of healthy donors
519
Influence of Amang (Tin Tailing) on Geotechnical Properties of Clay Soil (Pengaruh Amang Timah Terhadap Sifat Geoteknik Tanih Lempung)
520
Influence of Ambient Air Temperature on the Cooling/Heating Load of a Single Cell Protein Jacketed Fermenter Operating on Cheese Whey under Continuous Conditions
521
Influence of ambient atmosphere on the electrical properties of organic thin film transistors
522
Influence of ambient condition on thermodynamic performance of the humid air turbine cycle
523
Influence of ambient conditions and water flow on the performance of pre-cooled natural draft dry cooling towers
524
Influence of ambient conditions on the aging behavior of plasma-treated polyethylene surfaces
525
Influence of ambient flow conditions on the droplet atomization characteristics of dimethyl ether (DME)
526
Influence of ambient gas ionization on the deposition of clusters formed in an ablation plume
527
Influence of ambient gas pressure on laser-induced breakdown spectroscopy technique in the parallel double-pulse configuration
528
Influence of ambient gas pressure on laser-induced breakdown spectroscopy technique in the parallel double-pulse configuration
529
Influence of ambient medium on femtosecond laser processing of silicon
530
Influence of ambient temperature on combined-cycle power-plant performance
531
Influence of ambient temperature on early age concrete behaviour of anchorage zones
532
Influence of ambient temperature on electronic conduction in thick-film gas sensors
533
Influence of ambient temperature on the fatigue damage of welded bridge decks
534
Influence of ambient temperature on the rheological properties of alumina tape casting slurry
535
Influence of ambient temperatures on performance of a CO2 heat pump water heating system
536
Influence of ambient vapor concentration on droplet evaporation in a perspective of comparison between diffusion controlled model and kinetic model
537
Influence of Ambient–Temperature Corrosion on the Oxidation Behavior of Al-Si Coatings
538
Influence of amide linkages on acidity determinations of humic substances: Testing with model-mixtures
539
Influence of amine group on the adsorptive removal of basic dyes from water using two nanoporous isoreticular Zn(II)-based metal organic frameworks
540
Influence of amine-grafted multi-walled carbon nanotubes on physical and rheological properties of PMMA-based nanocomposites
541
Influence of amino acid moiety accessibility on the chiral recognition of cyclodextrin–amino acid mixed selectors in enantioselective gas chromatography
542
Influence of aminoglycoside antibiotics on the thermal behaviour and structural features of DPPE–DPPG model membranes
543
Influence of aminopyrimidyl derivatives on the supramolecular architectures and abundant nonvalent interactions of silver 5-nitroisophthalate coordination polymers
544
Influence of aminosilane surface functionalization of rare earth hydride-forming alloys on palladium treatment by electroless deposition and hydrogen sorption kinetics of composite materials
545
Influence of aminosilane surface modification and dyes adsorption on zeta potential of spherical silica particles formed in emulsion system
546
Influence of aminothiazole additives in I−/I3− redox electrolyte solution on Ru(II)-dye-sensitized nanocrystalline TiO2 solar cell performance
547
Influence of aminotriazole additives in electrolytic solution on dye-sensitized solar cell performance
548
Influence of amiodarone on QT dispersion in patients with life-threatening ventricular arrhythmias and clinical outcome
549
Influence of Amiprophosmethyl on the Root Cell Structure in the Herbicide-Sensitive and -Resistant Lines of Nicotiana plumbaginifolia
550
Influence of ammonia and ozone on growth and drought sensitivity of Pinus sylvestris
551
Influence of ammonia on CO and methanol oxidation over Pt/γ-Al2O3 catalysts modified by Mg
552
Influence of ammonia on membrane-electrode assemblies in polymer electrolyte fuel cells
553
Influence of ammonia on sulfate formation under haze conditions
554
Influence of ammonia on the morphologies and enhanced photocatalytic activity of TiO2 micro/nanospheres
555
Influence of ammoniating time on the microstructure of Mg-doped GaN nanowires
556
Influence of ammonium molybdate precursor on Mo powder preparation and working properties
557
Influence of ammonium polyphosphate microencapsulation on flame retardancy, thermal degradation and crystal structure of polypropylene composite
558
Influence of ammonium salt of poly-methacrylic acid and butylamine addition on the viscosity and electrophoretic deposition behavior of ethanol-based powder suspensions
559
Influence of ammonium sulphate feeding time on fed-batch Arthrospira (Spirulina) platensis cultivation and biomass composition with and without pH control
560
Influence of amoebae and physical and chemical characteristics of water on presence and proliferation of Legionella species in hospital water systems
561
Influence of Amorphous Clay-Size Materials on Soil Plasticity and Shrink-Swell Behavior
562
Influence of amorphous phase separation on the crystallization behavior of glass-ceramics in the BaO–TiO2–SiO2 system
563
Influence of amorphous silica layer formation on the dissolution rate of olivine at 90 °C and elevated pCO2
564
Influence of amorphous silica on the hydration in ultra-high performance concrete
565
Influence of amortisseurs on stabiliser design requirements for damping local oscillations of a generator
566
Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete
567
Influence of amphiprotic groups on the electrorheological behavior of polymers
568
Influence of amylopectin in dimethylsulfoxide on the improved performance of dye-sensitized solar cells
569
Influence of amylovoran production on virulence of Erwinia amylovora and a different amylovoran structure in E. amylovora isolates from Rubus
570
Influence of an additional 2-amino substituent of the 1-aminoethyl pharmacophore group on the potency of rimantadine against influenza virus A
571
Influence of an additional elastic stress on dry wear behaviour in reciprocating tests
572
Influence of an adjunct culture of Lactobacillus on the free amino acids and volatile compounds in a Roncal-type ewe’s-milk cheese
573
Influence of an Agatha flax fibre location in a stem on its mechanical, chemical and morphological properties
574
Influence of an aggressive early enteral nutrition protocol on nitrogen balance in critically ill children
575
Influence of an altered salinity regime on the population structure of two infaunal bivalve species
576
Influence of an aluminized intermediate layer on the adhesion of a γ-Al2O3 washcoat on FeCrAl
577
Influence of an ammonia activation prior to the PECVD SiN deposition on the solar cell performance
578
Influence of an anaerobic fungal culture administration on in vivo ruminal fermentation and nutrient digestion
579
Influence of an antioxidant on the shelf-life and quality of ground beef stored in a high-oxygen master package prior to display
580
Influence of an antiprogestin (onapristone) on in vivo and in vitro fertilization
581
Influence of an applied electric field on the torque of rotary lip seals on metal shafts. Part I: Effects of lip seal type
582
Influence of an applied electric field on the torque of rotary lip seals on metal shafts. Part II: Effects of oil type
583
Influence of an applied strain field on microstructural evolution during the α2 → O-phase transformation in Ti–Al–Nb system Original Research Article
584
Influence of an appropriate balance of the alloying elements on microstructure and on mechanical properties of nodular cast iron
585
Influence of an Aquatic Humic Acid on the Bioconcentration of Selected Compounds inDaphnia magna
586
Influence of an aqueous environment on the fretting behaviour of steel wires used in civil engineering cables
587
Influence of an artisanal lamb rennet paste on proteolysis and textural properties of Murcia al Vino cheese
588
Influence of an asymmetric shear deformation on microstructure evolution and mechanical behavior of AZ31 magnesium alloy sheet
589
Influence of an asymmetrical body weight distribution on the control of undisturbed upright stance
590
Influence of an axial high magnetic field on the liquid–solid transformation in Al–Cu hypoeutectic alloys and on the microstructure of the solid Original Research Article
591
Influence of an axial magnetic field on the stability of convective flows between non-isothermal concentric spheres
592
Influence of an early recovery telehealth intervention on physical activity and functioning after coronary artery bypass surgery among older adults with high disease burden
593
Influence of an elastic stress on the conductivity of passive films
594
Influence of an elastic stress on the conductivity of passive films
595
Influence of an electric field on the microstructure evolution of ion-irradiated alumina
596
Influence of an electric field on the plastic deformation of fine-grained MgO at high homologous temperatures Original Research Article
597
Influence of an electric field on the stability of thermogravitational flow in a vertical capacitor
598
Influence of an electric or magnetic field on the liquid–solid transformation in materials and on the microstructure of the solid
599
Influence of an electric or magnetic field on the liquid–solid transformation in materials and on the microstructure of the solid
600
Influence of an electrostatic potential at the metal/electrolyte interface on the electron binding energy of adsorbates as probed by X-ray photoelectron spectroscopy
601
Influence of an enhanced traffic volume around beaches in the short period of summer on ozone
602
Influence of an enrichment step on Salmonella sp. detection by fluorescent in situ hybridization on pork samples
603
Influence of an epitaxial Si capping of Ge islands on Si(0 0 1) and Si(1 1 0) by LPCVD
604
Influence of an Exit Wall Boundary on the Flow of a Circular Jet
605
Influence of an exogenous application of glycine betaine and methionine on biochemical and morphological traits of basils (Ocimum basilicum L)
606
Influence of an experimental fish farm on the spatio-temporal dynamic of a Mediterranean maërl algae community
607
Influence of an experimental Trypanosoma congolense infection and plane of nutrition on milk production and some biochemical parameters in West African Dwarf goats
608
Influence of an In2O3 buffer layer on the properties of ITO thin films
609
Influence of an increased NaCl concentration on yield and quality of cherry tomato grown in posidonia (Posidonia oceanica (L) Delile)
610
Influence of an inhomogeneous stress field and fault-zone thickness on the displacements and stresses induced by normal faulting
611
Influence of an initial hot-press processing step on the mechanical properties of 3D-C/SiC composites fabricated via PIP
612
Influence of an inner core on the long-period forced librations of Mercury
613
Influence of an Innovative Anti-Corrosive Solution on Resistance of Endodontic NiTi Rotary Instruments: A Preliminary Study
614
Influence of an insulating megaregolith on heat flow and crustal temperature structure of Mercury
615
Influence of an insulation partition on a seeded directional solidification process for quasi-single crystalline silicon ingot for high-efficiency solar cells
616
Influence of an intensive agricultural drainage basin on the seasonal distribution of organic pollutants in seawater from a Mediterranean coastal lagoon (Mar Menor, SE Spain)
617
Influence of an interpositional spacer on the behaviour of the tibiofemoral joint: A finite element study
618
Influence of an irregular surface and low light on the step variability of patients with peripheral neuropathy during level gait
619
Influence of an island land mass on the frequency of waterspout and tornado formation in its vicinity: Example of the Isle of Wight with regard to waterspouts and tornadoes affecting the English South Coast
620
Influence of an isolated magnetic impurity on an unconventional superconducting state
621
Influence of an LRP5 cytoplasmic SNP on Wnt signaling and osteoblastic differentiation
622
Influence of an O2 background gas on the composition and kinetic energies of species in laser induced La0.4Ca0.6MnO3 plasmas
623
Influence of an Odd-Even Relationship on the Aggregation Modes of "Gemini"-type CholestrolBased Gelators and Their Transcription into Silica Gel
624
Influence of an organic mulching on fertilizer nitrogen use efficiency and herb and essential oil yields in geranium (Pelargonium graveolens)
625
Influence of an organophosphonite antioxidant on the thermal behavior of PEEK/PEI blend
626
Influence of an ortho-sulfinyl group on the configurational stability of α-lithiated aryloxiranes: deuteration of tolylsulfinyl styrene oxides
627
Influence of an osmotic pre-treatment on structure-property relationships of air-dehydrated tomato slices Original Research Article
628
Influence of an overload applied within compressive base-line loading on crack propagation retardation in AM60B magnesium alloy
629
Influence of an oxidation of the carbon fiber surface on the adhesion strength in carbon fiber-acrylate composites cured by electron beam
630
Influence of an oxidation protective coating upon hot corrosion and mechanical behaviour of Ti–48Al–2Cr–2Nb alloy
631
Influence of an unvented tunnel entrance hood on the compression wave generated by a high-speed train
632
Influence of an upstream building on the wind-induced mean suction on the flat roof of a low-rise building
633
Influence of an upwelling filament on the distribution of labile fraction of dissolved Zn, Cd and Pb off Cape Sمo Vicente, SW Iberia
634
Influence of anaesthetic drugs on the epididymal sperm quality in domestic cats
635
Influence of ancient thrust faults on the hydrogeology of the blue ridge province
636
Influence of ancillary ligand L in the nitric oxide photorelease by the [Ru(L)(tpy)NO]3+ complex and its vasodilator activity based on visible light irradiation
637
Influence of Andean uplift on climate and paleoaltimetry estimates
638
Influence of androgens on bone mass in young women with sickle cell anemia
639
Influence of Anesthetics on Cardiac Index and Metabolic Outcomes in Mitral and Aortic Valve Replacement in Adults: A Randomized Clinical Study
640
INFLUENCE OF ANGIOTENSIN II TYPE 1 RECEPTOR SIGNAL BLOCKADE ON THE BLOOD VESSEL PERMEABILITY IN MICE
641
Influence of angiotensinogen M253T gene polymorphism and an angiotensin converting enzyme inhibitor on restenosis after percutaneous coronary intervention
642
Influence of angle control on the dynamic behaviour of power systems
643
Influence of angle of incidence on seismic demands for inelastic single-storey structures subjected to bi-directional ground motions
644
Influence of angular acceleration–deceleration pulse shapes on regional brain strains
645
Influence of angular momentum on fission fragment mass distribution: Interpretation within Langevin dynamics Original Research Article
646
Influence of animal and vegetable rennet on the physicochemical characteristics of Los Pedroches cheese during ripening
647
Influence of animal manure application on the chemical structures of soil organic matter as investigated by advanced solid-state NMR and FT-IR spectroscopy
648
Influence of animal slurries composition and relative particle size fractions on the C and N mineralization following soil incorporation
649
Influence of animal temperament and stress responsiveness on the carcass quality and beef tenderness of feedlot cattle
650
Influence of anion adsorption on the step dynamics on Au (111) electrodes
651
Influence of anion ionomer content and silver cathode catalyst on the performance of alkaline membrane electrode assemblies (MEAs) for direct methanol fuel cells (DMFCs)
652
Influence of anion structure on the liquid–liquid equilibria of 1-(3-hydroxypropyl)pyridinium cation based ionic liquid–hydrocarbon binary systems
653
Influence of anionic additive on Hg2+ interference on Ag+-ISEs based on [2.2.2]p,p,p-cyclophane as neutral carrier
654
Influence of anionic monomer content on the biodegradation and toxicity of polyvinyl-urethane carbonate-ceramic interpenetrating phase composites
655
Influence of anionic polyelectrolyte addition on ceria dispersion behavior for quartz chemical mechanical polishing
656
Influence of anionic vacancies on the ionic conductivity of silicated rare earth apatites
657
Influence of anions on formation and electroacitivity of poly-2,5-dimethoxyaniline
658
Influence of anions on the geotechnical properties of soils treated with hydraulic binders: Individual and coupling effects
659
Influence of anions on the rheological properties of clay mineral dispersions
660
Influence of anisotropic bending stiffness of gas diffusion layers on the degradation behavior of polymer electrolyte membrane fuel cells under freezing conditions
661
Influence of anisotropic bending stiffness of gas diffusion layers on the electrochemical performances of polymer electrolyte membrane fuel cells
662
Influence of anisotropic crystal field on a ferrimagnetic mixed-spin bilayer system
663
Influence of Anisotropic Elasticity on Improvement of Liquefaction Predictions: A Multiaxial Approach
664
Influence of anisotropy of the magnesium alloy AZ31 sheets on warm negative incremental forming
665
Influence of anisotropy on a limit load of weld strength overmatched middle cracked tension specimens
666
Influence of anisotropy on convection in porous media with nonuniform thermal gradient
667
Influence of anisotropy on heterogeneous nucleation Original Research Article
668
Influence of anisotropy on limit load of weld-strength overmatched cracked plates in pure bending
669
Influence of anisotropy on limit load of weld-strength overmatched cracked plates in pure bending
670
Influence of anisotropy on limit load of weld-strength overmatched cracked plates in pure bending
671
Influence of anisotropy on the limit load of bi-material welded cracked joints subject to tension
672
Influence of anisotropy on the transient hygroscopic stresses in polymer matrix composites with cyclic environmental conditions
673
Influence of annealing ambience on the formation of cobalt silicides
674
Influence of annealing and chain defects on the melting behaviour of poly(vinylidene fluoride)
675
Influence of annealing and deformation on optical properties of ultra precision diamond turned and anodized 6060 aluminium alloy
676
Influence of annealing and rinsing on magnetic and photocatalytic properties of TiO2
677
Influence of annealing atmosphere and temperature on photoluminescence of Tb3+ or Eu3+-activated zinc silicate thin film phosphors via sol–gel method
678
Influence of annealing atmosphere on room temperature ferromagnetism of Mn-doped ZnO nanoparticles
679
Influence of annealing atmosphere on the properties of La0.5Sr0.5MnO3
680
Influence of annealing atmosphere on the structure, resistivity and transmittance of InZnO thin films
681
Influence of annealing atmosphere on ZnO thin films grown by MOCVD
682
Influence of annealing conditions on ion nitriding of martensitic stainless steel
683
Influence of annealing conditions on microstructure and phase occurrence in high-alloy CrMnN steels
684
Influence of annealing conditions on size and optical properties of copper nanoparticles embedded in silica matrix
685
Influence of annealing conditions on the properties of reinforced silver-embedded silica matrix from the cheap silica source
686
Influence of annealing conditions on the structure and compositions of electrodeposited CuInSe2 films
687
Influence of annealing in air on transport properties of long-time oxidized layers of zirconium alloys
688
Influence of annealing in different chlorides on the photovoltaic parameters of CdS/CdTe solar cells
689
Influence of annealing in N2 on the properties of In2O3:Sn thin films prepared by direct current magnetron sputtering
690
Influence of annealing in nitrogen on the structural, electrical, and optical properties of CdO films doped with samarium
691
Influence of annealing medium on photoluminescence and optical properties of ZnSe:Cr crystals
692
Influence of annealing of membrane electrode assembly (MEA) on performance of direct methanol fuel cell (DMFC)
693
Influence of annealing on anisotropic crystalline structure of HDPE cast films
694
Influence of annealing on electrochromic performance of template assisted, electrochemically grown, nanostructured assembly of tungsten oxide Original Research Article
695
Influence of annealing on magnetic field-induced structural transformation and magnetocaloric effect in Ni–Mn–In–Co ribbons Original Research Article
696
Influence of annealing on microstructure and NO2-sensing properties of sputtered WO3 thin films
697
Influence of annealing on microstructure and NO2-sensing properties of sputtered WO3 thin films
698
Influence of annealing on microstructure and physical properties of isotactic polypropylene/calcium carbonate composites with β-phase nucleating agent
699
Influence of annealing on NiTi shape memory alloy subjected to severe plastic deformation
700
Influence of annealing on spin state of cobalt ions in La1–xSrxCoO3 (0≤x≤0.5) system
701
Influence of annealing on structural and optical properties of Zn3P2 thin films
702
Influence of annealing on structural, morphological, compositional and surface properties of magnetron sputtered nickel–titanium thin films
703
Influence of annealing on the distribution of thermoelectric figure of merit in bismuth-telluride ingots
704
Influence of annealing on the elastic properties and microstructure of Cu58.1Zr35.9Al6 bulk metallic glass
705
Influence of annealing on the high frequency magnetotransport properties of melt-spun Fe31Co31Nb8B30 alloys
706
Influence of annealing on the magnetic properties and magneto-impedance response in Fe84Zr7B8Cu1 ribbons
707
Influence of annealing on the magnetic properties and magneto-impedance response in Fe84Zr7B8Cu1 ribbons
708
Influence of annealing on the mechanical properties of SiC–Si composites with sub-micron SiC microstructures
709
Influence of annealing on the mechanical property of iron- and nickel-based nanocrystalline alloys
710
Influence of annealing on the microstructural, tensile and fracture properties of polypropylene films
711
Influence of annealing on the microstructure of commercial Mg alloy AZ31 after mechanical forming
712
Influence of annealing on the optical properties of 5,10,15,20-tetraphenyl-21H, 23H-porphine iron (III) chloride thin films
713
Influence of annealing on the optical properties of reactively sputtered BCN thin films
714
Influence of annealing on the photochemical deposition of silver onto PZT thin films under UV irradiation
715
Influence of annealing on the physical properties of filtered vacuum arc deposited tin oxide thin films
716
Influence of annealing on the shot-peened surface of duplex stainless steel at elevated temperatures
717
Influence of annealing on the structural properties of chemically synthesized CdS nano-crystallites
718
Influence of annealing on the structural, optical and photoluminescence properties of ZnO thin films for enhanced H2 sensing application
719
Influence of annealing on TLD-100 response to 5.3 MeV α-particles
720
Influence of annealing process on conductive properties of Nb-doped TiO2 polycrystalline films prepared by sol–gel method
721
Influence of annealing temperature and Au concentration on the electrical properties of multilayered a-Ge/Au films
722
Influence of annealing temperature and organic dyes as sensitizers on sol–gel derived TiO2 films
723
Influence of annealing temperature on luminescent properties of Eu3+/V5+ co-doped nanocrystalline Gd2Ti2O7 powders
724
Influence of annealing temperature on microstructure and optical properties of sol–gel derived tungsten oxide films
725
Influence of annealing temperature on morphological and magnetic properties of La0.9Sr0.1MnO3
726
Influence of annealing temperature on nano-stracture of Ti-Oxide thin films
727
Influence of annealing temperature on photoluminescence characteristics of Gd2O3:Eu/AAO nanowires
728
Influence of annealing temperature on RF magnetron sputtered calcium phosphate coatings
729
Influence of Annealing Temperature on Structural and Electrical Properties of Screen Printed Lanthanum Oxide Thick Films
730
Influence of annealing temperature on structural, optical and magnetic properties of Zn0.95Cu0.02Cr0.03O powders
731
Influence of annealing temperature on surface morphology and magnetic properties of Ni0.7Zn0.3Fe2O4 ferrite thin films
732
Influence of annealing temperature on the CO sensing mechanism for tin dioxide based sensors–Operando studies
733
Influence of annealing temperature on the magnetic and magnetoelastic properties in Fe–Co–B metallic glasses
734
Influence of annealing temperature on the nanostructure and corrosivity of Ti/stainless steel substrates
735
Influence of annealing temperature on the photoelectric gas sensing of Fe-doped ZnO under visible light irradiation
736
Influence of annealing temperature on the photoluminescence properties of ZnO quantum dots
737
Influence of annealing temperature on the photoluminescence property of ZnO thin film covered by TiO2 nanoparticles
738
Influence of annealing temperature on the properties of titanium oxide thin film
739
Influence of annealing temperature on the properties of ZnO thin films deposited by thermal evaporation
740
Influence of annealing temperature on the shape memory effect of Fe–14Mn–5Si–9Cr–5Ni alloy after training treatment
741
Influence of annealing temperature on the strength of dental glass ceramic materials
742
Influence of annealing temperature on the structural and anti-corrosion characteristics of sol–gel derived, spin-coated thin films
743
Influence of annealing temperature on the structural and optical properties of Mg–Al co-doped ZnO thin films prepared via sol–gel method
744
Influence of annealing temperature on the structural, optical and mechanical properties of ALD-derived ZnO thin films
745
Influence of annealing temperature on the structure and properties of the nanograined NiAl intermetallic coatings produced by using mechanical alloying
746
Influence of annealing treatment on Laves phase compound containing a V-based BCC solid solution phase—Part I: Crystal structures
747
Influence of annealing treatment on Laves phase compound containing a V-based BCC solid solution phase—Part II: Electrochemical properties
748
Influence of annealing treatment on the hydrogen storage properties of La2−xTixMgNi9 (x = 0.2, 0.3) alloys
749
Influence of annealing treatment on the microstructure and mechanical performance of cold sprayed 304 stainless steel coating
750
Influence of annealing treatment on the optical properties and structure of Cd2SnO4 thin films
751
Influence of annealing treatments on crystallization and mechanical properties of a Al–4Ni–6Ce glass
752
Influence of annealing treatments on crystallization and mechanical properties of a Al–4Ni–6Ce glass
753
Influence of anode diffusion layer properties on performance of direct borohydride fuel cell
754
Influence of anode material on electrochemical oxidation for the treatment of tannery wastewater
755
Influence of anode pore forming additives on the densification of supported BaCe0.7Ta0.1Y0.2O3−δ electrolyte membranes based on a solid state reaction
756
Influence of anode potentials on selection of Geobacter strains in microbial electrolysis cells
757
Influence of anodization on the fatigue strength of 7050-T7451 aluminium alloy
758
Influence of anodization parameters on the volume expansion of anodic aluminum oxide formed in mixed solution of phosphoric and oxalic acids
759
Influence of anomalous subarctic water intrusion on phytoplankton production off Baja California
760
Influence of anoxic and anaerobic hydraulic retention time on biological nitrogen and phosphorus removal in a membrane bioreactor Original Research Article
761
Influence of antagonistic minerals in soil and pastures onthe blood and liver copper in goats in Khuzestanprovince, Iran
762
Influence of antecedent conditions on critical shear stress of bed sediments
763
Influence of antecedent hydrologic conditions on patterns of hydrochemical export from a first-order agricultural watershed in Southern Ontario, Canada
764
Influence of antegrade pulmonary blood flow on the hemodynamic performance of bidirectional cavopulmonary anastomosis: A numerical study
765
Influence of anterior mitral leaflet second-order chordae on leaflet dynamics and valve competence
766
Influence of anthocyanins and derivative pigments from blueberry (Vaccinium myrtillus) extracts on MPP+ intestinal uptake: A structure–activity approach
767
Influence of anthraquinone scaffold on E/Z isomer distribution of two thiosemicarbazone derivatives. 2D NMR and DFT studies
768
Influence of anthropogenic activities on PAHs in sediments in a significant gulf of low-latitude developing regions, the Beibu Gulf, South China Sea: Distribution, sources, inventory and probability risk
769
Influence of anthropogenic activity on the lead isotope signature of Thau Lake sediments (southern France): origin and temporal evolution
770
Influence of Anthropogenic Disturbances on Understory Plant Diversity of Urban Forests in Wuhan, Central China
771
Influence of anthropogenic sources on total gaseous mercury variability in grenoble suburban air (France)
772
Influence of Anthropometric Measurements in Lung Function in Patients With Asthma
773
Influence of anti-caking agent kaolin on film formation of ethylene–vinylacetate and carboxylated styrene–butadiene latex polymers
774
Influence of anticoagulants on the measurement of S100B protein in blood
775
Influence of anticoagulants on the measurement of S100B protein in blood
776
Influence of anti-corrosion additive on the performance, emission and engine component wear characteristics of an IDI diesel engine fueled with palm biodiesel
777
Influence of anti-corrosive coatings on the bond of steel rebars to repair mortars
778
Influence of antidepressant drugs on Ecto-nucleotide pyrophosphatase/phosphodiesterases (E-NPPs) from salivary glands of rats
779
Influence of antifungal polyenes on the adhesion of Candida albicans and Candida glabrata to human epithelial cells in vitro
780
Influence of anti-HLA antibodies and positive T-lymphocytotoxic crossmatch on survival and graft rejection in human liver transplantation
781
Influence of anti-hyperlipidemic activity by co-administration of polyamines and rutin with simvastatin
782
Influence of anti-LDL receptor antibody on the transfer of cholesterol from LDL to isolated lymphocytes in normal subjects
783
Influence of antimicrobial additives on the formation of rosin nanofibers via electrospinning
784
Influence of antimicrobial agents on bactericidal activity of bovine milk polymorphonuclear leukocytes
785
Influence of antimicrobial agents on bactericidal activity of bovine milk polymorphonuclear leukocytes
786
Influence of Antimicrobial Coating and Low Temperature Storage on Quality Changes of Queen Pineapple Fruit
787
Influence of antimicrobial packaging on kinetics of spoilage microbial growth in milk and orange juice Original Research Article
788
Influence of antimony on the properties of the anodic oxide layer formed on Pb-Sb alloys
789
Influence of antioxidant spices on the retention of β-carotene in vegetables during domestic cooking processes
790
Influence of antioxidants in virgin olive oil on the formation of heterocyclic amines in fried beefburgers
791
Influence of antioxidants on electrical conduction in LDPE and XLPE
792
Influence of antiphase boundary period parameter M′ on elastic and electronic properties of one dimensional long period structures of Al3Ti
793
Influence of Antipsychotic and Anticholinergic Loads onCognitive Functions in Patients with Schizophrenia
794
Influence of anti-rheumatic drugs on gut permeability and on the gut associated lymphoid tissue
795
Influence of anxiety on postural control in humans standing with moving visual cues
796
Influence of Aortic Valve Calcium on Outcome in Patients Undergoing Peripheral Vascular Surgery
797
Influence of aortopulmonary rotation on the anomalous coronary artery pattern in tetralogy of Fallot
798
Influence of apatite seeds on the synthesis of calcium phosphate cement
799
Influence of Aphis gossypii Glover (Hemiptera: Aphididae) density on life table parameters of Aphidoletes aphidimyza Rondani (Diptera: Cecidomyiidae) under laboratory conditions
800
Influence of Apical Preparation Size on Effective Conventional Irrigation in the Apical Third: A Scanning Electron Microscopic Study
801
Influence of apo E phenotype on postprandial triglyceride and glucose responses in subjects with and without coronary heart disease
802
Influence of apolar group structure on the properties of Langmuir monolayers of polyphenyl carboxylic acids
803
Influence of apolipoprotein E phenotype on metabolism of lipids and apolipoproteins after plant stanol ester ingestion in japanese subjects
804
Influence of apolipoprotein E polymorphism on serum lipids and lipoprotein changes from childhood to adulthood: The Bogalusa Heart Study Original Research Article
805
Influence of apolipoprotein-E phenotypes on postprandial lipoprotein metabolism after three different fat loads
806
Influence of apoliprotein A-I gene promoter polymorphism on plasma lipid levels and responses to dietary change
807
Influence of apple cultivar and juice pasteurization on hard cider and eau-de-vie methanol content
808
Influence of apple purée preparation and storage on polyphenol contents and antioxidant activity
809
Influence of application and formulation factors on the penetration of hypericin in normal mouse skin and UV induced skin tumors
810
Influence of application of rice straw, farmyard manure, and municipal biowastes on nitrogen fixation, soil microbial biomass N, and mineral N in a model paddy microcosm
811
Influence of application of sewage sludges, and sludge and manure composts on plant Ca and Mg concentration and soil extractability in field experiments
812
Influence of application technique on the viability of the biological control agents Verticillium lecanii and Steinernema feltiae
813
Influence of application technology on the erosion resistance of DLC coatings
814
Influence of application time on penetration of an infiltrant into natural enamel caries
815
Influence of application time on penetration of an infiltrant into natural enamel caries
816
Influence of application time on the establishment, survival, and ability of Clonostachys rosea to suppress Botrytis cinerea sporulation on rose debris
817
Influence of Applied Behavioral Analysis on Speech, Motor and Self-HelpSkills of Autistic Children
818
INFLUENCE OF APPLIED BIOFERTILIZER ON PRODUCTIVITY ,QUALITY AND NUTRIENTS CONTENT OF SOME SOYBEAN CULTIVARS UNDER SALINE SOIL CONDITIONS.
819
Influence of applied electric field and mechanical boundary condition on the stress distribution at the crack tip in piezoelectric materials
820
Influence of applied electric field and mechanical boundary condition on the stress distribution at the crack tip in piezoelectric materials
821
Influence of applied in-plane strain on transverse thermal conductivity of 0°/90° and plain weave ceramic matrix composites
822
Influence of applied pressure on microstructure and tensile properties of squeeze cast magnesium Mg–Al–Ca alloy
823
Influence of applied stress on the transformation behaviour and martensite evolution of a Ti–Ni–Cu shape memory alloy
824
Influence of applied stress on the γ′ directional coarsening in a single crystal superalloy
825
Influence of applying external stress during aging on martensitic transformation and the superelastic behavior of a Ni-rich NiTi alloy
826
Influence of Applying Phosphate Bio-fertilizers and Different Levels of Phosphorus Sources on the Productivity, Quality and Chemical Composition of Sweet Fennel (Foeniculum Vulgare Mill.)
827
Influence of approach flow conditions on heat transfer behind vortex generators
828
Influence of aquatic macrophytes on the stable carbon isotopic signatures of sedimentary organic matter in lakes on the Tibetan Plateau
829
Influence of aqueous hexamethylenetetramine on the morphology of self-assembled SnO2 nanocrystals
830
Influence of aqueous leaf extract of common lambsquarters and NaCl salinity on the germination, growth, and nutrient content of wheat
831
Influence of aqueous ozone, blanching and combined treatments on microbial load of red bell peppers, strawberries and watercress Original Research Article
832
Influence of aqueous–organic solutions containing aprotic solvent on equilibrium and transport properties of ion–exchange membranes Original Research Article
833
Influence of aquifer heterogeneity and return flow on pumping test data interpretation
834
Influence of Aquifer Properties on Phytoremediation Effectiveness
835
Influence of Ar gas flow rate in organosilicon plasma for the fabrication of SiO:CH thin films by PECVD method
836
Influence of Ar/C2H2 ratio on the structure of hydrogenated carbon films
837
Influence of Ar/N2 flow ratio on structure and properties of nanoscale ZrN/WN multilayered coatings
838
Influence of Ar+ ion irradiation on the properties of plasma polymerized acetylene films
839
Influence of arabinofuranosylcytosine-5`-monophosphate and its emoxipin salt on viability and functional status of peripheral blood lymphocytes subpopulations
840
Influence of arachidonic acid and phytoviruses on the hormonal system of potato plants grown in vitro
841
Influence of aramid fiber moisture regain during atmospheric plasma treatment on aging of treatment effects on surface wettability and bonding strength to epoxy
842
Influence of arbuscular mycorrhiza and phosphate rock on uptake of major nutrients by Acacia mangium seedlings on degraded soil
843
Influence of Arbuscular mycorrhiza fungi and Bradyrhizobium japonicum on the fatty acids profile of soybean (Glycine max L.) under drought stress conditions
844
Influence of arbuscular mycorrhiza on osmotic adjustment compounds and antioxidant enzyme activity in nodules of salt-stressed soybean (Glycine max)
845
Influence of arbuscular mycorrhizae and a genetically modified strain of Sinorhizobium on growth, nitrate reductase activity and protein content in shoots and roots of Medicago sativa as affected by nitrogen concentrations
846
Influence of arbuscular mycorrhizae and a genetically modified strain of Sinorhizobium on growth, nitrate reductase activity and protein content in shoots and roots of Medicago sativa as affected by nitrogen concentrations
847
Influence of arbuscular mycorrhizae on biomass production, nutrient uptake and physiological changes in Ziziphus mauritiana Lam. under water stress
848
Influence of arbuscular mycorrhizae on growth, leaf yield and phosphorus uptake in mulberry (Morus alba L.) under rainfed, lateritic soil conditions
849
Influence of arbuscular mycorrhizal colonisation on cadmium induced Medicago truncatula root isoflavonoid accumulation
850
Influence of arbuscular mycorrhizal fungi and salinity on growth, biomass, and mineral nutrition of Acacia auriculiformis
851
Influence of arbuscular mycorrhizal fungi in sugarcane productivity under semiarid tropical agro ecosystem in India
852
INFLUENCE OF ARBUSCULAR MYCORRHIZAL FUNGI IN THE ESTABLISHMENT OF PRE-BROKEN SUGAR CANE
853
Influence of arbuscular mycorrhizal fungus, phosphorus and zinc on wheat grown on a calcareous soil
854
Influence of arbuscular mycorrhizal inoculation and humic acid application on growth and yield of Roselle (Hibiscus sabdariffa L.) and its mycorrhizal colonization index under deficit irrigation
855
Influence of Arctic Oscillation on dust activity over northeast Asia
856
Influence of areca nut nanofiller on mechanical and tribological properties of coir fibre reinforced epoxy based polymer composite
857
Influence of arene dissociation and phosphine coordination on the catalytic activity of [RuCl(κ2-triphos)(p-cymene)]PF6
858
Influence of arginine vasopressin receptors and angiotensin receptor subtypes on the water intake and arterial blood pressure induced by vasopressin injected into the lateral septal area of the rat
859
Influence of arginine, omega-3 fatty acids and nucleotide-supplemented enteral support on systemic inflammatory response syndrome and multiple organ failure in patients after severe trauma
860
Influence of argon ambience on the structural, morphological and optical properties of pulsed laser ablated zinc sulfide thin films
861
Influence of argon dilution on growth and properties of hydrogenated nanocrystalline silicon films
862
Influence of argon flow rate on the surface morphology and roughness of the DLC films prepared by MW ECR\PACVD
863
Influence of argon flow rate on TiO2 photocatalyst film deposited by dc reactive magnetron sputtering
864
Influence of argon gas bubbles and non-metallic inclusions on the flow behavior in steel continuous casting
865
Influence of argon gas flow on mechanical and electrical properties of sputtered titanium nitride thin films
866
Influence of argon plasma pretreatment on properties of liquid crystal polymer
867
Influence of argon/oxygen atmospheric dielectric barrier discharge treatment on desizing and scouring of poly (vinyl alcohol) on cotton fabrics
868
Influence of argon-ion bombardment of titanium surfaces on the cell behavior
869
Influence of Ar-H2-SF6 plasma on the surface structure and electrochemical properties of mesocarbon microbeads
870
Influence of arm lengthening in reverse shoulder arthroplasty
871
Influence of arm position during infraclavicular subclavian vein catheterization in coronary artery bypass graft surgery
872
Influence of aromatic ring substituents and co-ligand on the binding mode of a phosphine–borane-stabilized carbanion; crystal structures of [[(Me3Si)2{Ph2P(BH3)}C]KLn]2[Ln = (OEt2)2, pmdeta; pmdeta = N,N,N′,N″,N″-pentamethyldiethylenetriamine]
873
Influence of aromatic substituents on metal(II)salen catalysed, asymmetric synthesis of α-methyl α-amino acids
874
Influence of arsenate on seed and seedling growth of Triticum aestivum
875
Influence of arsenate species on the formation of Fe(III) oxyhydroxides and Fe(II–III) hydroxychloride
876
Influence of Arsenic (III), Cadmium (II), Chromium (VI), Mercury (II), and Lead (II) Ions on Human Triple Negative Breast Cancer (HCC1806) Cell Cytotoxicity and Cell Viability
877
Influence of arsenic on iron sulfide transformations
878
Influence of arsenic, antimony and phosphorous on the microstructure and corrosion behavior of brasses
879
Influence of arterial pulse and reflected waves on blood pressure and cardiac function, ,
880
Influence of arteriolar hyalinization on arterial intimal fibroplasia in the renal cortex of subjects in the united states, peru, and bolivia, applicable also to other populations
881
Influence of Artichoke (Cynara scolymus) Leaf Powder on Growth Performance, Carcass Traits and Blood Parameters in Broiler Chickens
882
Influence of artificial aging on the shear bond strength of zirconia-composite interfaces after pretreatment with new 10-MDP adhesive systems
883
Influence of artificial aging on the shear bond strength of zirconiacomposite interfaces after pretreatment with new 10-MDP adhesive systems
884
Influence of artificial light regimens on sexual maturation and boar taint in entire male pigs
885
Influence of artificial lights, logs and erosion on leatherback sea turtle hatchling orientation at Pongara National Park, Gabon
886
Influence of artificial neural network structure on quality of short-term electric energy consumption forecast
887
Influence of artificial reefs on fish assemblage of the Barra Bonita Reservoir (São Paulo, Brazil)
888
Influence of artificial saddle riding on postural stability in children with cerebral palsy
889
Influence of artificial saliva on abrasive wear and microhardness of dental composites filled with nanoparticles
890
Influence of artificial seawater on the cyclic response of superduplex stainless steels
891
Influence of Artificial Tear Related with Conjunctival Goblet Cell Density in Glaucoma Patients with Latanoprost Therapy
892
Influence of artificial wound and non-intact mucus layer on mortality of Atlantic salmon (Salmo salarL.) following a bath challenge withVibrio anguillarumandAeromonas salmonicida
893
Influence of artificially restricted rooting depth on soybean yield and seed quality
894
Influence of Ascending Versus Descending Balloon Counterpulsation on Bypass Graft Blood Flow
895
Influence of ascorbic acid and α-tocopherol on the autoxidation and in vitro antifungal activity of amphotericin B
896
Influence of ascorbic acid on the stability of chitosan solutions
897
Influence of ash composition on heavy metal emissions in ash melting process
898
Influence of Ash on Mass Transfer and Interfacial Reaction between Natural Graphite and Liquid Iron
899
Influence of ash on the fiber composition of dried dairy manures
900
Influence of Asian continental outflow on the regional background ozone level in northern South China Sea
901
Influence of Asian dust storms on air quality in Taiwan
902
Influence of Asian monsoon and ENSO events on particle fluxes in the western subtropical Pacific
903
Influence of Asian outflow on Rishiri Island, northernmost Japan: Application of radon as a tracer for characterizing fetch regions and evaluating a global 3D model
904
Influence of A-site Ba substitution on microwave dielectric properties of (BaxMg1−x)(A0.05Ti0.95)O3 (A=Zr, Sn) ceramics
905
Influence of A-site cation size on structural and physical properties in Ca1−xSrxMn0.96Mo0.04O3: A comparison of the image and 0.6 compounds
906
Influence of A-site deficiency on oxygen-vacancy-related dielectric relaxation, electrical and temperature stability properties of CuO-doped NKN-based piezoelectric ceramics
907
Influence of A-site nonstoichiometry on sintering, microstructure and electrical properties of (Bi0.5Na0.5)TiO3 ceramics
908
Influence of Aspect Ratio and Superficial Gas Velocity on the Evolution of Unsteady Flow Structures and Flow Transitions in a Rectangular Two-Dimensional Bubble Column
909
Influence of aspect ratio of carbon nanotubes on crystalline phases and dielectric properties of poly(vinylidene fluoride)
910
Influence of Aspect Ratio on Thermal Performance of Heat Sink using Ansys
911
Influence of aspect-ratio on the mixing and acoustic characteristics of plain and modified elliptic slot jets
912
Influence of Asphalt Mixture Stiffness on Fatigue Failure
913
Influence of asphalt pavement on damping ratio and resonance frequencies of timber bridges
914
Influence of asphaltenes on coke formation during the thermal cracking of different Brazilian distillation residues
915
Influence of aspirin on inflammatory markers in patients after acute myocardial infarction
916
Influence of Aspirin on Platelet Count and Volume in Humans
917
Influence of Aspirin Resistance on Platelet Function Profiles in Patients on Long-Term Aspirin and Clopidogrel After Percutaneous Coronary Intervention
918
Influence of assay conditions on the in vitro hindgut digestibility of dry matter
919
Influence of assembling pH on the stability of poly(l-glutamic acid) and poly(l-lysine) multilayers against urea treatment
920
Influence of Assessment Method Selection in Studying and Learning Approaches: Is It Necessary to Change Assessment Style?
921
Influence of assist gas nature on the surfaces obtained by laser cutting of Al–Cu alloys
922
Influence of assisted ion energy on surface roughness and mechanical properties of boron carbon nitride films synthesized by DIBSD
923
Influence of assisting ion beam current on the microstructure and surface morphology of IBAD-MgO thin films for YBCO coated conductors
924
Influence of astaxanthin, zeaxanthin and lutein on DNA damage and repair in UVA-irradiated cells
925
Influence of Asthma on the Degree of Apical Root Resorption in Orthodontically Treated Patients
926
Influence of astragalus polysaccharide on kidney status and fibrosis indices of a rat model of streptozotocininduced diabetic nephropathy
927
Influence of asymmetric adsorption on electronic states of molecule studied by scanning tunneling microscopy and spectroscopy
928
Influence of asymmetric cyclic loading on substructure formation and ratcheting fatigue behaviour of AISI 304LN stainless steel
929
Influence of asymmetric electrode geometry on an impedance spectrum of a plasma-sprayed thermal barrier coating system
930
Influence of asymmetric ratio of amphiphilic diblock copolymers on one-step formation and stability of multiple emulsions
931
Influence of Atchafalaya River Discharge and Winter Frontal Passage on Suspended Sediment Concentration and Flux in Fourleague Bay, Louisiana
932
Influence of atigmatim on multifocal and monofocal intraocular lene
933
Influence of atigmatim on multifocal and monofocal intraocular lene
934
Influence of atmosphere kind on temperature programmed decomposition of noble metal chlorides
935
Influence of atmosphere on redox structure of BaCe0.9Y0.1O2.95 – Insight from neutron diffraction study
936
Influence of atmospheric circulation patterns on dust transport during Harmattan Period in West Africa
937
Influence of atmospheric correction and number of sampling points on the accuracy of water clarity assessment using remote sensing application
938
Influence of atmospheric forcing and freshwater discharge on interannual variability of the vertical diffuse attenuation coefficient at 490 nm in the Baltic Sea
939
Influence of atmospheric inputs on the iron distribution in the subtropical North-East Atlantic Ocean
940
Influence of atmospheric moisture on slow fatigue crack growth at ultrasonic frequency in aluminium and magnesium alloys
941
Influence of atmospheric ozone, PM10 and meteorological factors on the concentration of airborne pollen and fungal spores
942
Influence of atmospheric parameters on vertical profiles and horizontal transport of aerosols generated in the surf zone
943
Influence of atmospheric pollutants on agriculture in developing countries: A case study with three new wheat varieties in Pakistan
944
Influence of atmospheric pollutants on the biodeterioration of stone
945
Influence of atmospheric pressure plasma treatment on surface properties of PBO fiber
946
Influence of atmospheric pressure plasma treatment time on penetration depth of surface modification into fabric
947
Influence of Atmospheric Pressure, Outdoor Temperature, and Weather Phases on the Onset of Spontaneous Pneumothorax
948
Influence of atmospheric refraction on the performance of an outdoor ultrasonic pulse compression system
949
Influence of atmospheric steam curing by solar energy on the compressive and flexural strength of concretes
950
Influence of atomic and mechanical attrition on low temperature plasma nitriding of ferrous alloys
951
Influence of atomic Cu-layer epitaxy on Co2 and CO phtoinduced desorption from ZnO(0001)
952
Influence of atomic order on TA1[110] phonon softening and displacive phase transition in Fe72Pt28 Invar alloys
953
Influence of atomic rearrangements on the magnetic properties of a thermally treated disordered Fe21Pd79 alloy
954
Influence of atomic-scale irregularities in fractal analysis of electrode surfaces
955
Influence of atomisation on solidification microstructures in the rapidly solidified powder of the Cr–Mo–V tool steel
956
Influence of atomisation on solidification microstructures in the rapidly solidified powder of the Cr–Mo–V tool steel
957
Influence of atomised powder characteristics on texture and microstructure development in extruded Al-8Fe-4Ni base alloys
958
Influence of atomised powder characteristics on texture and microstructure development in extruded Al-8Fe-4Ni base alloys
959
Influence of atomiser design and coaxial gas velocity on gas entrainment into sprays
960
Influence of atomising gas on particle characteristics of A1, Al-l wt-%Li, Mg, and Sn powders
961
Influence of atomization gas on coating properties under Ti arc spraying
962
Influence of atomization gas on coating properties under Ti arc spraying
963
Influence of atomization gas on coating properties under Ti arc spraying
964
Influence of atomized powder size on microstructures and mechanical properties of rapidly solidified Al–Cr–Y–Zr aluminum alloys
965
Influence of atomizing voltage on fluorine doped tin oxide via spray pyrolysis technique
966
Influence of atopic history on cord blood IgE
967
Influence of atorvastatin and simvastatin on apolipoprotein B metabolism in moderate combined hyperlipidemic subjects with low VLDL and LDL fractional clearance rates
968
Influence of atrial fibrillation on the morbido-mortality of patients on hemodialysis
969
Influence of atrypid morphological shape on Devonian episkeletobiont assemblages from the lower Genshaw formation of the Traverse Group of Michigan: A geometric morphometric approach
970
Influence of attackerʹs target recognition ability on defense strategy in homogeneous parallel systems
971
Influence of attackerʹs target recognition ability on defense strategy in homogeneous parallel systems
972
Influence of attention focus on neural activity in the human spinal cord during thermal sensory stimulation
973
Influence of Attenuation Correction on Transient Left Ventricular Dilation in Dual Isotope Myocardial Perfusion Imaging in Patients With Known or Suspected Coronary Artery Disease
974
Influence of attrition milling on nano-grain boundaries
975
Influence of attrition milling on the electrical properties of undoped-BaTiO3
976
Influence of Au and TiO2 structures on hydrogen dissociation over TiO2/Au(100)
977
Influence of Au and TiO2 structures on hydrogen dissociation over TiO2/Au(100)
978
Influence of Au capping layer on the magnetic properties of Fe/GaAs(0 0 1) ultrathin films
979
Influence of Au catalyst on the growth of ZnS nanowires
980
Influence of Au diffusion on the formation of nanodot hexagonal ordered arrays on GaSb substrates by low energy ion sputtering
981
Influence of Au particle size on Au/CeO2 catalysts for CO oxidation
982
Influence of Au reconstruction on growth of Fe on Au 100/
983
Influence of auditory–verbal, visual–verbal, visual, and visual–visual processing speed on reading and spelling at the end of Grade 1
984
Influence of austempering parameters on the microstructure and tensile properties of a medium carbon–manganese steel
985
Influence of austempering temperature on microstructure and fracture toughness of a high-carbon, high-silicon and high-manganese cast steel
986
Influence of austempering temperature on the mechanical properties of a low carbon low alloy steel
987
Influence of austenite deformation on ferrite growth in a Fe–C–Mn alloy
988
Influence of austenite grain size on recrystallisation–precipitation interaction in a V-microalloyed steel
989
Influence of austenitisation temperature on the structure and properties of weather resistant steels
990
Influence of austenitisation temperature on the structure and properties of weather resistant steels
991
Influence of austenitising temperature on the formation of strain induced martensite in austempered ductile iron
992
Influence of austenitization temperature on phase transformation features of modified high Cr ferritic heat-resistant steel
993
Influence of austenitizing temperature on fracture toughness of a low manganese austempered ductile iron (ADI) with ferritic as cast structure
994
Influence of austenitizing temperature on fracture toughness of a low manganese austempered ductile iron (ADI) with ferritic as cast structure
995
Influence of austenitizing temperature on microstructure and mechanical properties of AISI 431 martensitic stainless steel electron beam welds
996
Influence of autocatalytic coating bath parameters on the formation of copper over surface treated boron carbide particles
997
Influence of autofrettage on metal matrix composite reinforced gun barrels
998
Influence of autogeneous pressure under hydrothermal reaction on the structural and thermal stability of nanostructured titanates
999
Influence of autoignition delay time characteristics of different fuels on pressure waves and knock in reciprocating engines
1000
Influence of Autologous In Vitro Activation of Ovaries by Stem Cells and Growth Factors on Endocrine and Reproductive Function of Patients with Ovarian InsufficiencyA Clinical Trial Study