بر اساس عنوان

1
Solid oxide fuel cell architecture and system design for secure power on an unstable grid
2
Solid oxide fuel cell cathodes by infiltration of La0.6Sr0.4Co0.2Fe0.8O3 − δ into Gd-Doped Ceria
3
Solid oxide fuel cell membranes supported by nickel grid anode
4
Solid oxide fuel cell micro combined heat and power system operating strategy: Options for provision of residential space and water heating
5
Solid oxide fuel cell stacks using extruded honeycomb type elements
6
Solid oxide fuel cell systems for distributed power generation and cogeneration
7
Solid oxide fuel cell systems for residential micro-combined heat and power in the UK: Key economic drivers
8
Solid oxide fuel cell technology development in the U.S.
9
Solid oxide fuel cell technology—features and applications
10
Solid oxide fuel cell using (Ba0.3Sr0.2La0.5)InO2.75 electrolyte
11
Solid oxide fuel cell/gas turbine hybrid system analysis for high-altitude long-endurance unmanned aerial vehicles
12
Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy
13
Solid oxide fuel cells for stationary, mobile, and military applications
14
Solid oxide fuel cells operated by internal partial oxidation reforming of iso-octane
15
Solid oxide fuel cells operating without using an anode material
16
Solid oxide fuel cells that enable the detection of CO in reformed gases
17
Solid oxide fuel cells with bi-layered electrolyte structure
18
Solid oxide fuel cells with dense yttria-stabilized zirconia electrolyte membranes fabricated by a dry pressing process
19
Solid oxide fuel cells with electrolytes prepared via spray pyrolysis
20
Solid oxide fuel cells with Ni-infiltrated perovskite anode
21
Solid oxide fuel cells with YSZ-BNO Bi-layer electrolyte film deposited by magnetron sputtering
22
Solid oxide proton conducting steam electrolysers
23
Solid oxygen
24
Solid oxygen
25
Solid particle collection characteristics by an impactor with indented surface
26
Solid Particle Collection Characteristics on Impaction Surfaces of Different Designs
27
Solid particle collection characteristics on impaction surfaces of different designs
28
Solid particle decomposition and hydrolysis reaction kinetics in Cu–Cl thermochemical hydrogen production
29
Solid particle distribution of moderately concentrated suspensions in a pilot plant stirred vessel
30
Solid particle erosion and mechanical properties of stainless steels at elevated temperature
31
Solid particle erosion behavior of an Si3N4–MoSi2 composite at room and elevated temperatures
32
Solid particle erosion behavior of an Si3N4–MoSi2 composite at room and elevated temperatures
33
Solid particle erosion behaviour of CVD boron phosphide coatings
34
Solid particle erosion behaviour of ferrous and non-ferrous materials and correlation of erosion data with erosion models
35
Solid particle erosion behaviour of glass fibre reinforced boric acid filled epoxy resin composites
36
Solid particle erosion behaviour of high purity alumina ceramics
37
Solid particle erosion behaviour of various polyaryletherketone composites
38
Solid particle erosion caused by rice grains
39
Solid particle erosion mechanisms of hard protective coatings
40
Solid particle erosion mechanisms of protective coatings for aerospace applications
41
Solid particle erosion of AISI 304, 316 and 420 stainless steels
42
Solid particle erosion of alumina ceramics at elevated temperature
43
Solid particle erosion of carbon fibre– and glass fibre–epoxy composites
44
Solid particle erosion of carbon fibre– and glass fibre–epoxy composites
45
Solid particle erosion of CFRP composite with different laminate orientations
46
Solid particle erosion of diamond coatings under non-normal impact angles
47
Solid particle erosion of glass fibre reinforced flyash filled epoxy resin composites
48
Solid particle erosion of hot-pressed silicon nitride
49
Solid particle erosion of HVOF sprayed NiCr and Stellite-6 coatings
50
Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings
51
Solid particle erosion of thermal spray and physical vapour deposition thermal barrier coatings
52
Solid particle erosion of thermal sprayed coatings
53
Solid particle erosion of unidirectional carbon fibre reinforced polyetheretherketone composites
54
Solid particle erosion of unidirectional fibre reinforced thermoplastic composites
55
Solid particle erosion resistance of thermally sprayed functionally graded coatings for polymer matrix composites
56
Solid particle erosion studies on biomorphic Si/SiC ceramic composites
57
Solid particle erosion studies on polyphenylene sulfide composites and prediction on erosion data using artificial neural networks
58
Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: A review
59
Solid particle erosion–corrosion behaviour of a novel HVOF nickel aluminium bronze coating for marine applications—correlation between mass loss and electrochemical measurements
60
Solid particle impact erosion of alumina-based refractories at elevated temperatures
61
Solid particle motion in a standpipe as observed by Positron Emission Particle Tracking
62
Solid petroleum residue as macroscopic model systems for the study of microstructure in metal materials
63
Solid petroleum residue as macroscopic model systems for the study of microstructure in metal materials
64
Solid phase analytical derivatization as a sample preparation method
65
Solid phase analytical derivatization of anthropogenic and natural phenolic estrogen mimics with pentafluoropyridine for gas chromatography–mass spectrometry
66
Solid phase associations, oceanic fluxes and the anthropogenic perturbation of transition metals in world river particulates
67
Solid phase asymmetric alkylation reactions using 2-imidazolidinone chiral auxiliary
68
Solid phase bioremediation of pendimethalin in contaminated soil and evaluation of leaching potential
69
Solid phase capture of strontium by the iron reducing bacteria Shewanella alga strain BrY
70
Solid phase chelating extraction and separation of inorganic antimony species in pharmaceutical and water samples for graphite furnace atomic absorption spectrometry
71
Solid phase chelating extraction and separation of inorganic antimony species in pharmaceutical and water samples for graphite furnace atomic absorption spectrometry
72
Solid Phase Chemical Synthesis and Structure - Activity Study of Brevinin - 2R and Analogues as Antimicrobial Peptides
73
Solid phase chemistry at a modified cathode surface. First synthesis of a polyamine precursor
74
Solid phase combinatorial synthesis of benzothiazoles and evaluation of topoisomerase II inhibitory activity Original Research Article
75
Solid phase cross-coupling reaction of aryl(halo)silanes with 4-iodobenzoic acid
76
Solid phase crystallisation of HfO2 thin films
77
Solid phase deprotection of 2-nitrobenzenesulfonamides: synthesis of simple 2-(alkylamino)-pyrroles
78
Solid phase Diels–Alder/retro Diels–Alder reactions. A new method for traceless linker strategy
79
SOLID PHASE DISK EXTRACTION METHOD FOR THE DETERMINATION OF PERSISTENT ORGANOCHLORINE POLLUTANTS IN HUMAN BODY FLUIDS
80
Solid phase epitaxial growth of 3C–SiC thin film on Si and annihilation of nanopores
81
Solid phase epitaxial regrowth of Si1−xGex layers formed by single-energy Ge+, double-energy Si+ and Ge+, and Ge+ and Ge2+ ion implantations
82
Solid phase epitaxial regrowth of Si1−xGex layers formed by single-energy Ge+, double-energy Si+ and Ge+, and Ge+ and Ge2+ ion implantations
83
Solid phase epitaxy of Ge films on CaF2/Si(1 1 1)
84
Solid phase epitaxy of Na-ion irradiated α-quartz: Cathodoluminescence, kinetics and surface morphology
85
Solid Phase Equation of State Application for Wax Formation Prediction in Petroleum Mixtures.
86
Solid phase extraction – Multisyringe flow injection system for the spectrophotometric determination of selenium with 2,3-diaminonaphthalene
87
Solid phase extraction and determination of indium using multi-walled carbon nanotubes modified with magnetic nanoparticles
88
Solid phase extraction and determination of lead in soil and water samples using octadecyl silica membrane disks modified by bis[1-hydroxy-9,10-anthraquinone-2-methyl]sulfide and flame atomic absorption spectrometry
89
Solid phase extraction and determination of ultra trace amounts of copper(II) using octadecyl silica membrane disks modified by 11-hydroxynaphthacene-5,12-quinone and flame atomic absorption spectrometry
90
Solid phase extraction and determination of ultra trace amounts of mercury(II) using octadecyl silica membrane disks modified by hexathia-18-crown-6-tetraone and cold vapour atomic absorption spectrometry
91
Solid phase extraction and enrichment of essential fatty acid methyl esters from soy-derived biodiesel by novel π-complexing sorbents
92
Solid Phase Extraction and Flame Atomic Absorption Spectroscopic Determination of Trace Amounts of Iron(III) Using Octadecyl Silica Membrane Disks Modified with 2-Mercaptopyridine-1-oxide
93
Solid phase extraction and graphite furnace atomic absorption spectrometric determination of ultra trace amounts of bismuth in water samples
94
Solid phase extraction and HPLC determination of veterinary pharmaceuticals in wastewater
95
Solid phase extraction and liquid chromatography–electrospray ionization–mass spectrometry for the determination of bencycloquidium bromide in human plasma
96
Solid phase extraction and preconcentration of uranium(VI) and thorium(IV) on Duolite XAD761 prior to their inductively coupled plasma mass spectrometric determination
97
Solid phase extraction and removal of brilliant green dye on zinc oxide nanoparticles loaded on activated carbon: New kinetic model and thermodynamic evaluation
98
Solid phase extraction applied to natural waters: efficiency and selectivity
99
Solid phase extraction as a cleanup step before microextraction of diclofenac and mefenamic acid using nanostructured solvent
100
Solid phase extraction cleanup for non-polar and moderately polar molecular markers of PM2.5 sources
101
Solid phase extraction coupled to liquid chromatography-tandem mass spectrometry analysis of sulfonamides, tetracyclines, analgesics and hormones in surface water and wastewater in Luxembourg Original Research Article
102
Solid phase extraction flame atomic absorption spectrometric determination of ultratrace beryllium
103
Solid phase extraction flame atomic absorption spectrometric determination of ultra-trace beryllium Original Research Article
104
Solid Phase Extraction for 1-Hydroxypyrene as a Biomarker of Occupational Exposure to PAHs Prior to High Performance Liquid Chromatography
105
Solid phase extraction for analysis of biogenic carbonates by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS): an investigation of rare earth element signatures in otolith microchemistry Original Research Article
106
Solid phase extraction in combination with comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry for the detailed investigation of volatiles in South African red wines Original Research Article
107
Solid phase extraction in the analysis of squalene and tocopherols in olive oil
108
Solid Phase Extraction Method for Separation and Pre-concentration of Thallium in Water Samples Using a Novel Adsorbent
109
Solid phase extraction method for the separation and determination of chromium(III) in the presence of chromium(VI) using silica gel modified by N,N′-bis-(α-methylsalicylidene)-2,2-dimethyl-1,3-propanediimine Original Research Article
110
Solid phase extraction of 2,4-D from human urine
111
Solid phase extraction of amines Original Research Article
112
Solid Phase Extraction of Cadmium in Edible Oils Using Zinc Piperazinedithiocarbamate and Its Determination by Flame Atomic Absorption Spectrometry
113
Solid phase extraction of Cd(II) and Pb(II) ions based on a novel functionalized Fe3O4@ SiO2 core-shell nanoparticles with the aid of multivariate optimization methodology
114
SOLID PHASE EXTRACTION OF CD(II) USING MESOPOROUS ORGANOSILICA NANOPARTICLES MODIFIED WITH RESACETOPHENONE.
115
Solid phase extraction of Co ions using l-tyrosine immobilized on multiwall carbon nanotubes
116
Solid Phase Extraction of Co(II) Using Activated Carbon Obtained from Grape Stalk Prior to High-Resolution Continuum Source Flame Atomic Absorption Spectrometric Detection
117
Solid phase extraction of copper (II) by sorption on octadecyl silica membrane disk modified with a new Schiff base and determination with atomic absorption spectrometry
118
Solid phase extraction of copper (II) by sorption on octadecyl silica membrane disk modified with a new Schiff base and determination with atomic absorption spectrometry
119
Solid phase extraction of copper traces using poly(styrene-divinylbenzene) membrane disks modified with pyridoxal salicyloylhydrazone in water samples
120
Solid phase extraction of copper(II) by fixed bed procedure on cation exchange complexing resins
121
Solid Phase Extraction of Copper, Cadmium and Lead using Amberlite XAD-4 Resin Functionalized with 2- Hydroxybenzaldehyde Thiosemicarbazone and its Application on Green Tea Leaves
122
Solid phase extraction of copper, nickel, and cobalt in water samples using surfactant coated alumina modified with indane-1,2,3-trione 1,2-dioxime and determination by flame atomic absorption spectrometry
123
Solid phase extraction of europium and uranium using Tulsion CH-90 resin Original Research Article
124
Solid phase extraction of food contaminants using molecular imprinted polymers Original Research Article
125
Solid phase extraction of gold by sorption on octadecyl silica membrane disks modified with pentathia-15-crown-5 and determination by AAS
126
Solid phase extraction of lactic acid from fermentation broth by anion-exchangeable silica confined ionic liquids
127
Solid phase extraction of lead (II), copper (II), cadmium (II) and nickel (II) using gallic acid-modified silica gel prior to determination by flame atomic absorption spectrometry
128
Solid phase extraction of lead by Chelest Fiber Iry (aminopolycarboxylic acid-type cellulose) Original Research Article
129
SOLID PHASE EXTRACTION OF LEAD USING SIO2-DHAQ NANOPARTICLES
130
Solid Phase Extraction of Letrozole by a Metal Organic Framework and its HPLC-UV Characterization
131
Solid phase extraction of magnetic carbon doped Fe3O4 nanoparticles
132
Solid phase extraction of mercury on sulfur loaded with N-(2-chloro benzoyl)-N′-phenylthiourea as a new adsorbent and determination by cold vapor atomic absorption spectrometry
133
Solid Phase Extraction of Organochlorine Pesticides Residues in Groundwater (Akkar Plain, North Lebanon)
134
Solid phase extraction of pesticide residues in water samples: DDT and its metabolites
135
Solid Phase Extraction of Some Lanthanide Ions by Functionalized SBA-15 from Environmental Samples
136
Solid phase extraction of trace amounts of silver, cadmium, copper, mercury, and lead in various food samples based on ethylene glycol bis-mercaptoacetate modified 3-(trimethoxysilyl)-1-propanethiol coated Fe3O4 nanoparticles
137
Solid phase extraction of trace cobalt (II) in industrial wastewaters by modified nanotube carbon carboxyl and its determination with flame atomic spectroscopy
138
Solid Phase Extraction of Trace Copper in Aqueous Samples Using C18 Membrane Disks Modified by Benzildithiosemicarbazone Prior to Flame Atomic Absorption Spectrometric (FAAS) Determination
139
Solid Phase Extraction of Trace Copper(II) Using Modified Nano Polyacrylonitrile Fiber
140
Solid phase extraction of trace elements
141
Solid phase extraction of trace Hg(II) on silica gel modified with 2-(2-oxoethyl)hydrazine carbothioamide and determination by ICP-AES
142
Solid Phase Extraction of Ultra Trace Amounts of Ni2+ by Dimethylglyoxime (DMG) Immobilized on Column
143
Solid phase extraction of ultra trace copper(II) using octadecyl silica membrane disks modified by a naphthol-derivative Schiff’s base Original Research Article
144
Solid phase extraction of zinc(II) using a PVC-based polymer inclusion membrane with di(2-ethylhexyl)phosphoric acid (D2EHPA) as the carrier
145
Solid phase extraction preconcentration of cobalt and nickel with 5,7-dichloroquinone-8-ol embedded styrene–ethylene glycol dimethacrylate polymer particles and determination by flame atomic absorption spectrometry (FAAS)
146
Solid phase extraction procedure for urinary organic acid analysis by gas chromatography mass spectrometry
147
Solid phase extraction using immobilized yeast Saccharomyces cerevisiae for determination of palladium in road dust Original Research Article
148
Solid phase extraction using magnetic core mesoporous shell microspheres with C18-modified interior pore-walls for residue analysis of cephalosporins in milk by LC–MS/MS
149
Solid Phase Extraction Using Modified Magnetic Iron Oxide Nanoparticles for Extraction and Spectrofluorimetric Determination of Carvedilol in Human Plasma Samples
150
Solid phase extraction using nanoporous MCM-41 modified with 3,4-dihydroxybenzaldehyde for simultaneous preconcentration and removal of gold(III), palladium(II), copper(II) and silver(I)
151
Solid phase extraction vis-à-vis coprecipitation preconcentration of cadmium and lead from soils onto 5,7-dibromoquinoline-8-ol embedded benzophenone and determination by FAAS
152
Solid phase extraction with flame atomic absorption spectrometry for determination of traces of Ca, K, Mg and Na in quality control of white sugar
153
Solid phase extraction, multidimensional gas chromatography mass spectrometry determination of four novel aroma powerful ethyl esters: Assessment of their occurrence and importance in wine and other alcoholic beverages
154
Solid phase extraction—gas-chromatographic method to determine free cholesterol in animal fats
155
Solid phase extraction—gas-chromatographic method to determine free cholesterol in animal fats
156
Solid phase extraction—Non-aqueous capillary electrophoresis for determination of metformin, phenformin and glyburide in human plasma
157
Solid phase extraction–preconcentration and high performance liquid chromatographic determination of 2-mercapto-(benzothiazole, benzoxazole and benzimidazole) using copper oxide nanoparticles
158
Solid phase extraction–spectrophotometric determination of fluoride in water samples using magnetic iron oxide nanoparticles
159
Solid Phase Extraction–Spectrophotometric Determination of Phosphate Using Modified Magnetite Nanoparticles as Extractor
160
Solid phase extractive preconcentration coupled to gas chromatography–atomic emission detection for the determination of chlorophenols in water samples
161
Solid phase extractive preconcentration of thorium onto 5,7-dichloroquinoline-8-ol modified benzophenone
162
Solid phase extractive preconcentration of thorium onto 5,7-dichloroquinoline-8-ol modified benzophenone
163
Solid phase extractive preconcentration of trace metals using p-tert-butylcalix[4]arene-1,2-crown-4-anchored chloromethylated polymeric resin beads Original Research Article
164
Solid phase extractive preconcentration of Uranium from Jordanian phosphoric acid using 2-hydroxy-4-aminotriazine-anchored activated carbon
165
Solid phase extractive preconcentration of uranium(VI) onto diarylazobisphenol modified activated carbon
166
Solid phase extractive preconcentration of uranium(VI) using quinoline-8-ol anchored chloromethylated polymeric resin beads
167
Solid phase grafting of various monomers on hydroperoxidized polypropylene
168
Solid phase growth of NiSi in polycrystalline Si on SiO2 with Cl plasma containing NiCl
169
Solid phase growth of tin oxide nanostructures
170
Solid phase hydrodynamics of three-phase fluidized beds—A convective/dispersive mixing model
171
Solid phase insertion of diamines into peptide chains
172
Solid phase iron–sulfur geochemistry of a reactive barrier for treatment of mine drainage
173
Solid phase measurements of antibody and lectin binding to xenogenic carbohydrate antigens
174
Solid phase mechanochemical synthesis of polyaniline branched nanofibers
175
Solid phase microbial fuel cell (SMFC) for harnessing bioelectricity from composite food waste fermentation: Influence of electrode assembly and buffering capacity
176
Solid phase microextraction (SPME) applied to honey quality control
177
Solid phase micro-extraction (SPME) fibre performance in turbid aqueous samples
178
Solid phase microextraction and gas chromatography with ion trap detector (GC-ITD) analysis of amitraz residues in beeswax after hydrolysis to 2,4-dimethylaniline Original Research Article
179
Solid phase microextraction and LC–MS/MS for the determination of paliperidone after stereoselective fungal biotransformation of risperidone Original Research Article
180
Solid phase microextraction applied to the analysis of organophosphorus insecticides in fruits
181
Solid phase microextraction as a methodology in the detection of irradiation markers in ground beef
182
Solid phase microextraction as a reliable alternative to conventional extraction techniques to evaluate the pattern of hydrolytically released components in Vitis vinifera L. grapes
183
Solid phase microextraction as a tool for trace element speciation
184
Solid phase microextraction as a tool to predict internal concentrations of soil contaminants in terrestrial organisms after exposure to a laboratory standard soil
185
Solid phase microextraction associated with microwave assisted extraction of organochlorine pesticides in medicinal plants
186
Solid phase microextraction associated with microwave assisted extraction of organochlorine pesticides in medicinal plants Original Research Article
187
Solid phase microextraction capillary gas chromatography combined with furnace atomization plasma emission spectrometry for speciation of mercury in fish tissues
188
Solid phase microextraction coupled to liquid chromatography. Analysis of organosulphur compounds avoiding artifacts formation
189
Solid phase microextraction coupled with comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry for high-resolution metabolite profiling in apples: Implementation of structured separations for optimization of sample preparation
190
Solid phase microextraction for analysis of alkanes and aromatic hydrocarbons in human breath
191
Solid Phase Microextraction for Measuring Agricultural Pesticides in Natural Samples
192
Solid phase microextraction for organochlorine pesticidesin water samples using MWCNTs-doped polypyrrole coated on steel fiber before determination by gas chromatography electron capture detector
193
Solid phase microextraction gas chromatographic analysis of organophosphorus pesticides in biological samples
194
Solid phase microextraction of aminodinitrotoluenes in tissue
195
Solid phase microextraction of macrolide, trimethoprim, and sulfonamide antibiotics in wastewaters
196
Solid phase microextraction of volatile oxidation compounds in oil-in-water emulsions
197
Solid phase microextraction procedure for the determination of alkylphenols in water by on-fiber derivatization with N-tert-butyl-dimethylsilyl-N-methyltrifluoroacetamide Original Research Article
198
Solid phase microextraction sampling for a rapid and simple on-site evaluation of volatile organic compounds emitted from building materials
199
Solid phase microextraction using new sol–gel hybrid polydimethylsiloxane-2-hydroxymethyl-18-crown-6-coated fiber for determination of organophosphorous pesticides
200
Solid phase microextraction with liquid chromatography–electrospray ionization–tandem mass spectrometry for analysis of amphetamine and methamphetamine in serum Original Research Article
201
Solid phase microextraction, mass spectrometry and metabolomic approaches for detection of potential urinary cancer biomarkers—A powerful strategy for breast cancer diagnosis
202
Solid phase microextraction/gas chromatography/mass spectrometry integrated with chemometrics for detection of Salmonella typhimurium contamination in a packaged fresh vegetable Original Research Article
203
Solid phase microextraction-gas chromatographic–mass spectrometric determination of nitrous oxide evolution to measure denitrification in estuarine soils and sediments
204
Solid Phase Microextraction-Gas Chromatography for the Analysis of Explosives in Post Blast Water Samples
205
Solid phase microextraction-high pressure liquid chromatographic determination of nabam, thiram and azamethiphos in water samples with UV detection. preliminary data
206
Solid phase nanoreactor based on polycalix[4]resorcinarene for catalytic processes with participation of hydrogen and oxygen
207
Solid phase organic synthesis of polyamine derivatives and initial biological evaluation of their antitumoral activity
208
Solid phase palladium-catalysed CC bond formation in the pyridine series: access to aryl and alkynyl pyridylpiperazines
209
Solid phase partitioning of metals in Managed Realignment soils: laboratory studies in timed soil sea-water batch mixtures
210
Solid phase partitioning of metals in managed retreat soils: field changes over the first year of tidal inundation
211
Solid phase peptide synthesis on JandaJelTM resin
212
Solid phase photopolymerization of pyrrole in poly(vinylchloride) matrix
213
Solid phase preconcentration and determination of trace concentrations of total gold (I) and/or (III) in sea and wastewater by ion pairing impregnated polyurethane foam packed column prior flame atomic absorption spectrometry
214
Solid phase preconcentration of iron as methylthymol blue complex on naphthalene-tetraoctylammonium bromide adsorbent with subsequent flame atomic absorption determination
215
Solid phase preconcentration-Fourier transform infrared spectrometric determination of carbaryl and 1-naphthol
216
Solid phase proteomics: Dramatic reinforcement of very weak protein–protein interactions
217
Solid phase selective separation and preconcentration of Cu(II) by Cu(II)-imprinted polymethacrylic microbeads
218
Solid phase selective separation and preconcentration of Cu(II) by Cu(II)-imprinted polymethacrylic microbeads Original Research Article
219
Solid phase sequential 1,3-dipolar cycloaddition–Pictet–Spengler reactions
220
Solid phase single-molecule counting of antibody binding to supported protein layers surface with low nonspecific adsorption
221
Solid phase speciation of radiocaesium in bottom sediments
222
Solid Phase Synthesis and Antiparasitic Activity of a Library of Peptidyl Metronidazoles
223
Solid phase synthesis and antiprotozoal evaluation of di- and trisubstituted 5′-carboxamidoadenosine analogues Original Research Article
224
Solid phase synthesis and biological activities of [Arg8]-vasopressin methylenedithioether
225
Solid phase synthesis and purification of 5′-mercaptoalkylated oligonucleotides
226
Solid phase synthesis and SAR of small molecule agonists for the GPR40 receptor
227
Solid phase synthesis of [18F]Labelled peptides for positron emission tomography
228
Solid phase synthesis of [3,5,7]-1H-imidazo[1,5-a]imidazol-2(3H)-ones
229
Solid phase synthesis of 1,3-disubstituted succinimides
230
Solid phase synthesis of 1,5-disubstituted pyrazole-4-hydroxamic acids and pyrazole-4-carboxamides via direct amidation of β-ketoesters
231
Solid Phase Synthesis of 17α-E/Z-(X-Phenyl)-Vinyl Estradiols Using the Stille Coupling Reaction
232
Solid phase synthesis of 1-substituted pyroglutamates
233
Solid phase synthesis of 3-(5′-carboxypentyl)-5-substituted tetrahydro-2H-1,3,5-thiadiazin-2-thione derivatives
234
Solid phase synthesis of 3-(5-arylpyridin-2-yl)-4-hydroxycoumarins
235
Solid phase synthesis of 3,5-disubstituted oxazolidin-2-ones
236
Solid phase synthesis of 5,6,7,8-tetrahydro-1H-imidazo[4,5-g]quinoxalin-6-ones
237
Solid phase synthesis of 6-acylamino-1-alkyl/aryl-4-oxo-1,4-dihydrocinnoline-3-carboxamides
238
Solid phase synthesis of a biased mini tetrapeptoid-library for the discovery of monodentate itam mimics as ZAP-70 inhibitors
239
Solid phase synthesis of a molecular library of pyrimidines, pyrazoles, and isoxazoles with biological potential
240
Solid phase synthesis of a spiro[5.5]ketal library
241
Solid phase synthesis of amides by the Beckmann rearrangement of ketoxime carbonates
242
Solid phase synthesis of aminoboronic acids: potent inhibitors of the hepatitis C virus NS3 proteinase
243
Solid phase synthesis of an extensively focused library of thiadiazole ethers
244
Solid phase synthesis of anhydrous zinc borate from zinc and boron oxide and utilization as a flame retardant in dye and textile
245
Solid phase synthesis of aromatic isophthalic oligoamides with controlled molecular weight
246
Solid phase synthesis of aspartyl peptide aldehydes
247
Solid phase synthesis of azapeptides utilising reversible amide bond protection to prevent hydantoin formation
248
Solid phase synthesis of benzothiazole and thiophene derivatives based on resin-bound cyclic malonic acid ester
249
Solid phase synthesis of benzothiazolyl compounds
250
Solid phase synthesis of benzylamine-derived sulfonamide library
251
Solid phase synthesis of biohybrid block copolymers
252
Solid phase synthesis of chiral 2-amino-benzimidazoles
253
Solid phase synthesis of C-terminal carbohydrate modified enkephalins
254
Solid phase synthesis of cyclic peptides by oxidative cyclative cleavage of an aryl hydrazide linker—synthesis of stylostatin 1
255
Solid phase synthesis of diamides as potential bone resorption inhibitors
256
Solid phase synthesis of DNA-3′-PNA chimeras by using Bhoc/Fmoc PNA monomers
257
Solid phase synthesis of enantiomerically pure polyhydroxyvalerolactams
258
Solid phase synthesis of glutamic acid derivatives via nucleophilic ring opening of N-Boc pyroglutamate with heteronucleophiles
259
Solid phase synthesis of hydroxamate peptides for histone deacetylase inhibition
260
Solid Phase Synthesis of Hydroxy Benzothiazepinones through Cyclative Release under Thermolysis
261
Solid phase synthesis of isoxazole and isoxazoline-carboxamides via [2+3]-dipolar cycloaddition using resin-bound alkynes or alkenes
262
Solid phase synthesis of mandelic acid-derived thioethers by α-keto carbocation trapping
263
Solid phase synthesis of mono- or disubstituted arginine containing peptides from an isothiocitrulline precursor
264
Solid phase synthesis of N-aminodipeptides in high optical purity
265
Solid phase synthesis of N-carboxy alkyl-containing peptides derived from enantiopure αketo-β-aminoacids
266
Solid phase synthesis of novel asymmetric hydrophilic head cholesterol-based cationic lipids with potential DNA delivery Original Research Article
267
Solid phase synthesis of oligomannopeptoids that mimic the concanavalin A-binding trimannoside
268
Solid phase synthesis of oligonucleotides tethered to oligo-glucose phosphate tails
269
Solid phase synthesis of oligoureas using O-succinimidyl-(9H-fluoren-9-ylmethoxycarbonylamino)ethylcarbamate derivatives as activated monomers
270
Solid phase synthesis of peptide dimers and trimers linked through an N-terminal lysine residue
271
Solid phase synthesis of peptide vinyl sulfone and peptide epoxyketone proteasome inhibitors
272
Solid phase synthesis of peptides containing a phosphoserine - sulfur mustard adduct
273
Solid phase synthesis of peptidotriazoles with multiple cycles of triazole formation
274
Solid phase synthesis of phosphinic acid endothelin converting enzyme inhibitors
275
Solid phase synthesis of polylactosamine oligosaccharide
276
Solid phase synthesis of pp60src-related phosphopeptides via ‘global’ phosphorylation and their use as substrates for enzymatic phosphorylation by casein kinase-2 Original Research Article
277
Solid phase synthesis of praziquantel
278
Solid phase synthesis of quinolones
279
Solid phase synthesis of selective caspase-3 peptide inhibitors Original Research Article
280
Solid phase synthesis of structurally diverse pyrimido[4,5-d] pyrimidines for the potential use in combinatorial chemistry
281
Solid phase synthesis of styrylquinazolinones
282
Solid phase synthesis of sulfahydantoins
283
Solid phase synthesis of tetrahydro-1,4-benzodiazepin-2-ones
284
Solid phase synthesis of trypanothione reductase inhibitors—towards single bead screening
285
Solid phase synthesis of α-acylamino-α,α-disubstituted ketones
286
Solid Phase Synthetic Reaction of Sodium Pyroxene for Na2CO3-Fe(OH)3-H2SiO3 System Original Research Article
287
Solid phase total synthesis of callipeltin E isolated from marine sponge Latrunculia sp.
288
Solid phase transformation and metlting of the compounds Ln4Al2O9 (Ln Gd, Dy, Y)
289
Solid phase transformation and metlting of the compounds Ln4Al2O9 (Ln Gd, Dy, Y)
290
Solid phase β-lactams synthesis using the Staudinger reaction, monitored by 19F NMR spectroscopy
291
Solid phase-assisted synthesis and screening of a small library of N-(4-hydroxyphenyl)retinamide (4-HPR) analogs
292
Solid phase-mediated synthesis of isonitriles
293
Solid phases in cycloheptanol: Dynamic disorder and glass transitions
294
Solid phosphoric acid catalysed conversion of oxygenate containing Fischer–Tropsch naphtha Original Research Article
295
Solid phosphoric acid catalysts: The effect of free acid composition on selectivity and activity for 1-hexene dimerisation Original Research Article
296
Solid phosphoric acid oligomerisation: Manipulating diesel selectivity by controlling catalyst hydration
297
Solid photopolymerization and polymer properties of octadecyl vinyl ether
298
Solid plasticity and supercooled-liquid thermoplasticity of Zr–Cu-enriched hypoeutectic Zr–Cu–Ni–Al cast glassy alloys
299
Solid polyelectrolyte (SPE) membranes containing a textured platinum catalyst
300
Solid polyelectrolyte (SPE) membranes with textured surface
301
Solid polymer electrolyte actuator using electrode reaction
302
Solid polymer electrolyte based on sulfonated polysulfone membranes and acidic silica for direct methanol fuel cells
303
Solid polymer electrolyte cells using SnSb/Li2.6Co0.4N composite anodes
304
Solid polymer electrolyte CO2 reduction
305
Solid polymer electrolyte composite membranes for olefin/paraffin separation
306
Solid polymer electrolyte membrane composite microelectrode investigations of fuel cell reactions. II: voltammetric study of methanol oxidation at the nanostructured platinum microelectrode|Nafion® membrane interface
307
Solid polymer electrolyte membranes for fuel cell applications—a review
308
Solid polymer electrolyte-based hydrogen sulfide sensor
309
Solid polymer electrolyte-coated carbon fibres for structural and novel micro batteries
310
Solid polymer electrolytes based on comblike polymers
311
Solid polymer electrolytes based on cross-linked polysiloxane-g-oligo(ethylene oxide): ionic conductivity and electrochemical properties
312
Solid polymer electrolytes based on poly(vinylchloride)–lithium sulfate
313
Solid polymer electrolytes based on polyethylene oxide and lithium trifluoro- methane sulfonate (PEO–LiCF3SO3): Ionic conductivity and dielectric relaxation
314
Solid polymer electrolytes for lithium cells
315
Solid polymer electrolytes from dilithium salts based on new bis[(perfluoroalkyl)sulfonyl]diimide dianions. Preparation and electrical characterization
316
Solid polymer electrolytes of blends of polyurethane and polyether modified polysiloxane and their ionic conductivity
317
Solid polymer electrolytes V: microstructure and ionic conductivity of epoxide-crosslinked polyether networks doped with LiClO4
318
Solid polymer electrolytes VIII: effect of LiClO4-doped level on the microstructure and ionic conductivity of a chemical-covalently polyether-siloxane hybrid electrolyte
319
Solid polymer fuel cells for pulse power delivery
320
Solid polymer fuel cells for transport and stationary applications
321
Solid polymers: a challenge for NMR
322
Solid products and rate-limiting step in the thermal half decomposition of natural dolomite in a CO2 (g) atmosphere
323
Solid Propellant Environmental Issues
324
Solid propellant gas generator (SPGG) plays a role as a turbo pump starter in liquid propellant propulsion systems by supplying pressurized gas to power turbines for engine start. For such a purpose, the propellant should burn with a low flame temperature
325
Solid Pseudopapillary Neoplasm of Pancreas; A Case Series and Review Literature
326
Solid Pseudopapillary Tumor of Pancreas in a 14-year-old Adolescent Presenting With Melena: A Case Report
327
Solid Pseudopapillary Tumor of Pancreas: A Clinicopathologic Report from a Single Institution in Southern Iran
328
Solid Pseudopapillary Tumor of Pancreas: Presentations and Management
329
Solid Pseudo-Papillary Tumor of the Pancreas in a 10 Year Old Girl
330
Solid Pseudopapillary Tumor of the Pancreas: a Case Report and Review of Literature
331
Solid pure component property effects on modeling upper crossover pressure for supercritical fluid process synthesis: A case study for the separation of Annatto pigments using SC-CO2
332
Solid Record for LMPs
333
Solid Reference Electrode of Metallurgical Oxygen Sensor Original Research Article
334
Solid Right Ventricular Compression by Intraventricular Septum-Hematoma Induced after Percutaneous Coronary Intervention
335
Solid sample graphite furnace atomic absorption spectroscopy for supporting arsenic determination in sediments following a sequential extraction procedure Original Research Article
336
Solid sampling electrothermal vaporization inductively coupled plasma mass spectrometry for the direct determination of Hg in sludge samples Original Research Article
337
Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations
338
Solid sampling in analysis of animal organs by two-jet plasma atomic emission spectrometry
339
Solid sampling-graphite furnace atomic absorption spectrometry for the direct determination of boron in plant tissues Original Research Article
340
Solid sampling-graphite furnace atomic absorption spectrometry for the direct determination of silver at trace and ultratrace levels Original Research Article
341
Solid sampling-graphite furnace atomic absorption spectrometry for the direct determination of trace amounts of silicon in polyamide. Comparison of the performance of platinum and palladium as chemical modifiers
342
Solid sediment load history of the Zambezi Delta
343
Solid sensory polymer kit for the easy and rapid determination of the concentration of water in organic solvents and ambient humidity
344
Solid Sirolimus Self-microemulsifying Drug Delivery System: Development and Evaluation of Tablets with Sustained Release Property
345
Solid SMEDDS: An Approach for Dissolution Rate Enhancement Using Telmisartan as Model Drug
346
Solid softwood coated with plasma-polymer for water repellence
347
Solid solubilities of (La Nd,)2(Zr,Ti)2O7 phases deduced by neutron diffraction
348
Solid solubility and electrical conduction mechanisms in 3-layer Aurivillius ceramics
349
Solid solubility and phase transitions in the system LaNb1−xTaxo4
350
Solid solubility extension in Cu-V and Cu-Cr alloys produced by chill block melt-spinning
351
Solid solubility extension in Cu-V and Cu-Cr alloys produced by chill block melt-spinning
352
Solid solubility in the system NaLREETi2O6– ThTi2O6 (LREE, light rare-earth elements): experimental and analytical data
353
Solid solubility of antilipemic agents and micronization of gemfibrozil in supercritical carbon dioxide
354
Solid solubility of germanium in silver
355
Solid solubility of hydrogen in Pb83Li17 alloy: A preliminary investigation
356
Solid solubility of Mg in Ca2Ni7 and hydrogen storage properties of (Ca2−xMgx)Ni7 alloys
357
Solid solubility of Yb2Si2O7 in β-, γ- and δ-Y2Si2O7
358
Solid solution between Al-ettringite and Fe-ettringite (Ca6[Al1 − xFex(OH)6]2(SO4)3·26H2O)
359
Solid solution coating of (TiVCrZrHf)N with unusual structural evolution
360
Solid solution formation, densification and ionic conductivity of Gd- and Sm-doped ceria
361
Solid solution hardening — a comparison of two models
362
Solid solution hardening — a comparison of two models
363
Solid solution hardening of molybdenum–hafnium alloys: Experiments and Modeling
364
Solid solution in Al–4.5 wt% Cu produced by mechanical alloying
365
Solid Solution in the As2S3-Sb2S3 Series at Zarshuran Gold Deposit, Iran
366
Solid solution lithium alloy cermet anodes
367
Solid solution mechanism and thermodynamic properties of Ti–Re alloy system: Experiment and theory
368
Solid solution of rare earth elements in synthetic titanite: a reconnaissance study
369
Solid solution of transition metal-dicarboxylates with tunable magnetic properties
370
Solid solution of triptycenequinone and triptycenehydroquinone as a non-stoichiometric quinhydrone. Bathochromic changes in color caused by local intermolecular interaction between p-benzoquinone and hydroquinone moieties
371
Solid solution softening at high strain rates in Si- and/or Mn-added interstitial free steels Original Research Article
372
Solid Solution VxFe1-x[TCNE]2·zCH2Cl2 Room-Temperature Magnets
373
Solid Solutions and Ternary Compound Formation among Ge3N4-Si3N4 Nitride Spinels Synthesized at High Pressure and High Temperature
374
Solid solutions in the Fe–Co–Ni–As–S system
375
Solid solutions La1−xAgyMnO3+δ: evidence for silver doping, structure and properties
376
Solid solutions of La-doped BiFeO3 obtained by the Pechini method with improvement in their properties
377
Solid solutions of lead-doped bismuth layer of Aurivillius n = 2 and n = 3 oxides: structural and dielectric characterization
378
Solid solutions of mixed metal Mn3−xMgxFe4(PO4)6 orthophosphates: Colouring performance within a double-firing ceramic glaze
379
Solid solutions of perovskite in the LaO1.5–BaO–ScO1.5–ZrO2 system at 1600 °C
380
Solid solutions of platinum(II) and palladium(II) oxalato-complex salt as precursors of nanoalloys
381
Solid Solutions of WO3into Zirconia in WO3–ZrO2 Catalysts
382
Solid solutions on the base of bismuth vanadate: Preparation, structure, phase transitions, dielectric and transport properties
383
Solid solutions: from theory to experiment
384
Solid sorption cycles: A short history
385
Solid speciation and fractionation of rare earth elements in a spodosol profile from northern Sweden as revealed by sequential extraction
386
Solid speciation and mobility of potentially toxic elements from natural and contaminated soils: A combined approach Original Research Article
387
Solid spot conductance at low contact pressure
388
Solid stainless steel for MSF once-through plants
389
Solid state 1:1 adduct via O–H⋯N hydrogen bond of the aminal 1,3,6,8-tetraazatricyclo[4.4.1.13,8]dodecane (TATD) and hydroquinone
390
Solid state 13C CP-MAS NMR and FT-IR spectroscopic analysis of cuticular fractions of berries and suberized membranes of potato
391
Solid state 13C CP-MAS NMR and FT-IR spectroscopic analysis of cuticular fractions of berries and suberized membranes of potato
392
Solid state 13C NMR and high temperature 1H NMR determination of bulk structural properties for mesophase-containing semi-cokes prepared from coal tar pitch Original Research Article
393
Solid state 13C NMR and infrared studies on the molecular packing of anhydrous Zinc(II) n-alkanoates
394
Solid state 13C NMR and optical non-linearities study of C60 trimethylenediamine adducts
395
Solid State 13C NMR of 30-Crown-10 Ether and 30-Crown-10.4H2O
396
Solid state 13C NMR spectroscopy on EPDM/PP/oil based thermoplastic vulcanizates in the melt
397
Solid state 13C-NMR and X-ray studies on the structure of tetraethylpyrazabole
398
Solid state 13C-NMR spectroscopy and XRD studies of commercial and pyrolytic carbon blacks Original Research Article
399
Solid state 15N and 13C NMR study of dioxomolybdenum (VI) complexes of Schiff bases derived from trans-1,2-cyclohexanediamine
400
Solid state 1H NMR study of molecular dynamics and domain sizes in PBT with the fullerene derivates: Decylamine–C60 and tetracyanoethylene oxide–C60
401
Solid state 29Si magic angle spinning NMR: investigation of bond formation and crystallinity of silicon and graphite powder mixtures during high energy milling
402
Solid state 29Si magic angle spinning NMR: investigation of bond formation and crystallinity of silicon and graphite powder mixtures during high energy milling
403
Solid state 2H-NMR studies of segmental dynamics in polymer blends
404
Solid State 31P MAS NMR Detection of Hydrogen-bonded Phosphate Polymer in Calcium–Phosphate Composites
405
Solid state 47,49Ti, 87Sr and 137Ba NMR characterisation of mixed barium/strontium titanate perovskites
406
Solid state 95Mo NMR studies of the Chevrel-phase solid solution Mo6Se8−xTex
407
Solid State Amorphisation in Magnetic Multilayers: the Interface Structure and the Electrical Transport Properties
408
Solid state amorphization and crystallization in Zr66.7Pd33.3 metallic glass
409
Solid state amorphization in cold drawn Cu/Nb wires Original Research Article
410
Solid state amorphization in metal/Si systems
411
Solid state amorphization kinetic of alpha lactose upon mechanical milling Original Research Article
412
Solid state amorphization transformation in the mechanically alloyed Fe27.9Nb2.2B69.9 powders
413
Solid state amplified spontaneous emission in some spiro-type molecules: A new concept for the design of solid state lasing molecules
414
Solid state anaerobic co-digestion of yard waste and food waste for biogas production
415
Solid state and catalytic CO oxidation studies on Zn1 − xNixMnO3 system
416
Solid state and conventional neutron optical elements
417
Solid state and conventional neutron optical elements
418
Solid state and crystalline state-specific (ω→α) photoisomerization-linked dioxygenation reaction of (ω-substituted alkyl)cobalt complexes
419
Solid state and hydrothermal synthesis, characterization and optical properties of Yb2V2O7
420
Solid state and solution 43Ca NMR of calcium peroxides involved in the disproportionation of hydrogen peroxide by calcium hydroxide
421
Solid state and solution behaviour of N-(2-pyridyl)- and N-(4-methyl-2-pyridyl)aminomethane-1,1-diphosphonic acids
422
Solid state and solution characterization of a new dinuclear nickel (II) complex: The search for synthetic models for urease
423
Solid state and solution conformation of 2-pyridinecarboxylic acid hydrazides: a new structural motif for foldamers
424
Solid state and solution investigations of derivatives of Group 11 metal ions with 1-benzyl-2-imidazolyldiphenylphosphine (L). Electrochemical behavior of [M2L3]2+ (M=CuI; AgI) and [AuL2]+ complexes
425
Solid state and solution NMR, X-ray and antimicrobial studies of 1:1 and 2:1 complexes of silver(I) cyanide with alkanediamine ligands
426
Solid state and solution properties of lanthanide(III) complexes of a tetraiminodiphenolate macrocyclic ligand. X-ray structure, 1H NMR and luminescence spectral studies
427
Solid state and solution structural studies of silver(I) cyclic complexes bearing the (Bzim)Ph2P ligand
428
Solid state and solution structure of the hetero-dimetallic complexes [Cp(CO)2Re{μ-C(OMe)(Ph)}Pt(COD)] and [Cp(CO)2Re{μ-CPh}Pt(COD)]+, containing bridging carbene and carbyne ligands
429
Solid state and solution structures of 2-halophenolate complexes of lithium
430
Solid state and solution structures of the nickel(II) complex NiL2 of the ambidentate (S,S)- or (P,S)-chelating ligand 3-diphenylphosphane-carbothioyl-1,1-dimethyl-thiourea (HL)
431
Solid state and solution synthesis of Ba(Mg1/3Ta2/3)O3: A comparative study
432
Solid state and sonochemical syntheses of nano lead(II) chloride and bromide coordination polymers from its nitrate analog via mechanochemical crystal to crystal transformations
433
Solid state and sonochemical syntheses of nano lead(II) chloride and bromide coordination polymers from its nitrate analog via mechanochemical crystal to crystal transformations
434
Solid state and theoretical evaluation of β-fluoroethyl esters indicate a fluorine-ester gauche effect
435
Solid state batteries with sulfide-based solid electrolytes
436
Solid state bioconversion of wheat straw into digestible and nutritive ruminant feed by Ganoderma sp. rckk02
437
Solid state bonding in extrusion and FSW: Process mechanics and analogies
438
Solid state bonding of CuCrZr to 316L stainless steel for ITER applications
439
Solid state calculations using WIEN2k
440
Solid state cathodoluminescence and the properties of its two emission peaks
441
Solid State Cells with Buffer Electrodes for Measurement of Chemical Potentials and Gibbs Energies of Formation: System Ca-Rh-O
442
Solid state ceramic gas sensors based on interfacing ionic conductors with semiconducting oxides
443
Solid state characterisation of silver sulfadiazine loaded on montmorillonite/chitosan nanocomposite for wound healing
444
Solid State Characterization and Dissolution Enhancement of Nevirapine Cocrystals
445
Solid state characterization of chloramphenicol palmitate. Raman spectroscopy applied to pharmaceutical polymorphs
446
Solid state characterization of coprecipitated alumina-gallia mixed oxide powders
447
Solid state characterization of hydroxyprocaine hydrochloride. Crystal polymorphism of local anaesthetic drugs, part VIII
448
SOLID STATE CHARACTERIZATION OF LINEZOLID CRYSTAL FORMS
449
Solid state characterization of potential protozoocidal agents — aminoisoxazolylnaphthoquinones
450
Solid state characterization of α-chitin from Vanessa cardui Linnaeus wings
451
Solid State Chemistry and Catalysis Workshop in Villeurbanne
452
Solid State Communications: New Editorial Board Structure
453
Solid state compatibility between yttrium nickel manganite electrode and yttria-doped ceria and yttria-doped zirconia electrolytes
454
Solid state conductance in fused ring aromatic compounds
455
Solid State Conductivity and Catalytic Activity of Hexacyanoferrate(II)–Thiosemicarbazide Complexes of 3d-Metals
456
Solid state conformational classification of eight-membered rings in copper complexes double bridged by phosphate, phosphonate or phosphinate ligands
457
Solid state conformational preferences of the {M(μ-XPX)}2 core (X = O, S) in transition metal complexes
458
Solid state conformational study of complexes containing the (o-P–C6H4–CN-κ2N,P) palladium six-membered chelated ring
459
Solid state convection in the icy satellites: discussion of its possibility Original Research Article
460
Solid state convection in the icy satellites: numerical results Original Research Article
461
Solid State Coordination Chemistry in the Design of Molybdenum Oxides: The Hydrothermal Synthesis and Structure of a Layered Copper-Molybdenum Oxide, [Cu(tpytrz)2Mo4O13] (tpytrz=tripyridyltriazine)
462
Solid state coordination chemistry of cobalt(II) with carboxyphenyltetrazoles
463
Solid state coordination chemistry of copper with pyridyltetrazoles: Structural consequences of incorporation of coordinating anions
464
Solid state coordination chemistry of copper(II) lactate complexes with the twisted ligands 4,4′-dipyridyldisulfide and bis(4-pyridylthio)methane
465
Solid state coordination chemistry of molybdenum oxides with 1,2,3-triazole (Htrz): The crystal structures of [Cu(I)Cu(II)2(trz)2Mo4O13(OH)], [MoO3(Htrz)0.5] and [Cu(I)trz]
466
Solid state coordination chemistry of organodiphosphonates with copper(II) and auxilliary aromatic nitrogen heterocyclic ligands
467
Solid State Coordination Chemistry of Oxomolybdenum Organoarsonate Materials
468
Solid state coordination chemistry of polyoxomolybdate clusters: Hydrothermal synthesis and structures of image and image (Hpt = 5(4′-pyridyl)tetrazole)
469
Solid state coordination chemistry of the oxofluorovanadium–diphosphonate system in the presence of Cu(II)–tetrapyridylpyrazine complex cations: The crystal structures of [{Cu2(tpyprz)(H2O)2}V4FO8(HO3PCH2PO3)2], [{Cu2(tpyprz)(H2O)2}V4F6O6(O3PCH2CH2PO3)],
470
Solid state coordination chemistry of the oxovanadium-diphosphonate system: Structural consequences of aryl tethers on materials of the type cation/VxOy/diphos, where cation = organoammonium and diphos = 1,4-phenyldiphosphonic acid
471
Solid state coordination chemistry of the oxovanadium-diphosphonate/copper-bipyrimidine system: Crystal structures of [{Cu2(bpyr)}VO(H2O)(HO3PCH2PO3)2] and [{Cu2(bpyr)}{Cu2(bpyr)(H2O)2}(VO2)2(HO3PCH2PO3)2(HO3PCH2PO3H)2]
472
Solid State Coordination Chemistry: One-, Two-, and Three-Dimensional Materials Constructed from Molybdophosphonate Subunits Linked through Binuclear Copper Tetra-2-pyridylpyrazine Groups
473
Solid state coordination chemistry: Structural consequences of varying diphosphonate tether length and fluoride incorporation in the copper–bisterpy/oxomolybdenum/organodiphosphonate system (bisterpy = 2,2′:4′,4″:2″,2″′-quarterpyridyl-6′,6″-di-2
474
Solid state coordination chemistry: the hydrothermal synthesis and structure of a bimetallic oxide incorporating 2,2′:6′,2″-terpyridine (terpy), [{VO(terpy)}MoO4]
475
Solid state CP/MAS 13C NMR of the insoluble organic matter of the Orgueil and Murchison meteorites: quantitative study
476
Solid state CP/MAS 13C NMR of the insoluble organic matter of the Orgueil and Murchison meteorites: quantitative study
477
Solid state CPMAS 13C and 15N NMR spectroscopy in organic geochemistry and how spin dynamics can either aggravate or improve spectra interpretation
478
Solid State Culture Conditions for Composting Sewage Sludge
479
Solid state dehalogenation of PCBs in contaminated soil using NaBH4
480
Solid state demixing in Bi2Se3-Bi2Te3 and Bi2Se3-In2Se3 phase diagrams
481
Solid state detector for high spatial resolution coupled to a single event acquisition system for slow neutron detection
482
Solid state detector for high spatial resolution coupled to a single event acquisition system for slow neutron detection
483
Solid state detectors
484
Solid state detectors
485
Solid state devices based on thin films of Cu2O show a new type of I–V relations
486
Solid state de-wetting of vapor deposited films on planar and fiber-shaped carbon substrates
487
Solid state diffusion bonding of titanium to steel using a copper base alloy as interlayer
488
Solid state diffusion during nuclear glass residual alteration in solution
489
Solid state diffusion in Cu–Sn and Ni–Sn diffusion couples with flip-chip scale dimensions
490
Solid state double layer capacitor based on a polyether polymer electrolyte blend and nanostructured carbon black electrode composites
491
Solid state dye lasers with scattering feedback
492
Solid state dye-sensitized photovoltaic micro-wires (DSPMs) with carbon nanotubes yarns as counter electrode: Synthesis and characterization
493
Solid state dye-sensitized solar cell with TiO2/NiO heterojunction: Effect of particle size and layer thickness on photovoltaic performance
494
Solid state dye-sensitized solar cells prepared by infiltrating a molten hole conductor into a mesoporous film at a temperature below 150 °C
495
Solid state dye-sensitized TiO2 solar cells with poly(3-octylthiophene) as hole transport layer
496
Solid state effects in photoionization cross sections: Cooper minima in photoemission
497
Solid state effects in photoionization cross sections: Cooper minima in photoemission
498
Solid state effects in the electronic structure of ladder-type poly(p-phenylene)s and oligo(p-phenylene)s
499
Solid state effects in the NEXAFS spectra of alkane-based van der Waals crystals: Breakdown of molecular model
500
Solid state electrical conductance properties of some new bimetallic salts and heterometallic coordination polymers derived from bis (1-ethoxycarbonyl-1-cyanoethylene-2,2-dithiolato) cuprate(II) ion1
501
Solid state electrical conductivity and humidity sensing studies on metal molybdate–molybdenum trioxide composites (M = Ni2+, Cu2+ and Pb2+)
502
Solid state electrical conductivity and thermal degradation studies on some phenothiazine derivatives Original Research Article
503
Solid state electrochemical hydrogen sensor for aluminium and aluminium alloy melts
504
Solid state electrochemistry of direct carbon/air fuel cells
505
Solid state electrochemistry: By Peter G. Bruce (Ed). Cambridge University Press, New York, 1995, pp. xvi + 344, price $84.95
506
Solid state electrochemistry: Edited by Peter G. Bruce (Cambridge University Press, New York, 1995), 344 pages, $84.95 (hardcover)
507
Solid state electrochromic device: behaviour of different salts on its performance
508
Solid state electrolytes: overview of materials and applications during the last third of the Twentieth Century
509
Solid State EPR Studies on Bis(1,2-dithiosquarato) cuprates(II): a Structure – Spectroscopy Relationship
510
Solid State Fermentation
511
SOLID STATE FERMENTATION FOR PRODUCTION OF CHITOSAN BY ASPERGILLUS NIGER
512
Solid state fermentation of Achras zapota lignocellulose by Phanerochaete chrysosporium
513
Solid state fermentation of broiler litter for production of biocontrol agents
514
Solid state fermentation of food waste mixtures for single cell protein, aroma volatiles and fat production
515
Solid state fermentation process for producing chickpea (Cicer arietinum L) tempeh flour. Physicochemical and nutritional characteristics of the product
516
Solid state field-assisted diffusion of silver in multi-component tellurite glasses
517
Solid state formation of calcium ferrites from thermal decomposition of mixtures Ca3(C6H5O7)2·4H2O–Fe2(C2O4)3·6H2O: The role of mechanical activation on the mechanism of the thermal decomposition and the temperature of the ferrites formation
518
Solid state formation of calcium ferrites from thermal decomposition of mixtures Ca3(C6H5O7)2·4H2O–Fe2(C2O4)3·6H2O: The role of mechanical activation on the mechanism of the thermal decomposition and the temperature of the ferrites formation
519
Solid state fuel storage and utilization through reversible carbon deposition on an SOFC anode
520
Solid state gas sensor for fast carbon dioxide detection
521
Solid state generator for powerful radio frequency ion sources in neutral beam injection systems
522
Solid state growth mechanisms for carbon nanotubes Review Article
523
Solid state high resolution nmr studies of electron spin densities in charge-transfer complex-based organic ferromagnets
524
Solid state interaction between a Sn–Ag–Cu–In solder alloy and Cu substrate
525
Solid state interaction between amoxicillin trihydrate and potassium clavulanate
526
Solid state interactions in nano-sized oxides
527
Solid state intercalation of barium into poly(para-phenylene): TEM, EELS and ESR characterizations
528
Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallization Original Research Article
529
Solid state ion exchange chemistry of the solid solution KxRb1 − xFeS2
530
Solid state ion trap: Lateral confinement of quantum well excitons by oscillating piezoelectric field
531
Solid state ionic devices for combustion gas sensing
532
Solid state ionic tools for catalysis and materials research: In honor of Robert A. Huggins
533
Solid state ionics applications in vacuum technology
534
Solid state ionics IV: By G-A. Nazri, J-M. Tarascon and M. Schreiber (eds.). Materials Research Society, Pittsburgh, 1995, 715 pages, price $67 MRS member, $77 US list, $82 foreign. ISBN 1-55899-271-5
535
Solid state irreversible anion-exchange on one-dimensional silver(I) coordination polymer nanostructures
536
Solid state isomerisation reactions of some ruthenium complexes
537
Solid state joining of dissimilar sintered P/M preform tubes by simultaneous cold extrusion
538
Solid state joining of dissimilar sintered P/M preform tubes by simultaneous cold extrusion
539
Solid state joining of dissimilar sintered P/M preform tubes by simultaneous cold extrusion
540
Solid state joining of steel-Cu P/M preform tubes: use of interlayer and post joining heat treatments
541
Solid state kinetics of the oxidation of MoO2 investigated by time-resolved X-ray absorption spectroscopy
542
Solid state lasers with Raman frequency conversion
543
Solid state lithium ion conduction in pyrrolidinium imide–lithium imide salt mixtures
544
Solid state lithium secondary batteries using an amorphous solid electrolyte in the system (100−x)(0.6Li2S·0.4SiS2)·xLi4SiO4 obtained by mechanochemical synthesis
545
Solid state luminescence of CuI and CuNCS complexes with phenanthrolines and a new tris (aminomethyl) phosphine derived from N-methyl-2-phenylethanamine
546
Solid state magnetic refrigerator
547
Solid state mechanism leading to enhanced attrition resistance of alumina based catalyst supports for Fischer–Tropsch synthesis
548
Solid state metathesis of CaSO4:Eu2+ phosphor
549
Solid state metathesis synthesis of BaTiO3, PbTiO3, K0.5Bi0.5TiO3 and Na0.5Bi0.5TiO3
550
Solid state microcellular foamed poly(lactic acid): Morphology and property characterization
551
Solid state mixed oxides synthesis under microwave heating (JMSL10627-04)
552
Solid state modifications of drospirenone
553
Solid state multinuclear NMR: a versatile tool for studying the reactivity of solid systems
554
Solid state neutron detectors
555
Solid state neutron detectors
556
Solid state nitric oxide sensor prepared by sol–gel entrapment of iron-diethyldithiocarbamate in a siloxane matrix
557
Solid state NMR analysis of polypyrrole grown in a phosphonium ionic liquid
558
Solid state NMR and DFT study of polymer electrolyte poly(ethylene oxide)/LiCF3SO3
559
Solid state NMR and LVSEM studies on the hardening of latex modified tile mortar systems
560
Solid state NMR and X-ray diffraction studies of α-d-galacturonic acid monohydrate Original Research Article
561
Solid state NMR as a tool of structure and dynamics in solid state chemistry and materials science: recent progress and challenges
562
Solid state NMR characterisation of the thermal transformation of Fullerʹs Earth
563
Solid state NMR characterization and flammability of styrene–acrylonitrile copolymer montmorillonite nanocomposite
564
Solid State NMR Interaction Parameters of Oxygens Linking Titanium and Silicon in Crystalline Cyclic Titanodiphenylsiloxanes
565
Solid state NMR investigation of hydrous ruthenium oxide
566
Solid state NMR investigation of oxygen dynamics in scandium doped ceria in 50 K to 1073 K temperature range
567
Solid state NMR investigation of silica aerogel supported Fischer–Tropsch catalysts
568
Solid state NMR investigations on the role of organic admixtures on the hydration of cement pastes
569
Solid State NMR Reveals a pH-dependent Antiparallel β-Sheet Registry in Fibrils Formed by a β-Amyloid Peptide
570
Solid state NMR sideband shape simulations for any spinning angle and speed. First order calculation of residual dipolar coupling to quadrupolar nuclei
571
Solid state NMR spectroscopy study of molecular motion in cyclomaltoheptaose (β-cyclodextrin) crosslinked with epichlorohydrin
572
Solid state NMR spin-lattice relaxation investigation of oxygen dynamics in scandium doped ceria from 60 to 1073 K
573
Solid state NMR structural studies of the lithiation of nano-silicon:: Effects of charging capacities, host-doping, and thermal treatment
574
Solid state NMR studies of covalent graphite fluorides (CF)n and (C2F)n Original Research Article
575
Solid state NMR studies of phosphate/tin matrix formed on electrochemical insertion into SnP2O7
576
Solid state NMR studies of photoinduced polarization in photosynthetic reaction centers: mechanism and simulations
577
Solid state NMR study of acid sites formed by adsorption of SO3 onto (gamma)-Al2O3
578
Solid state NMR study of chemical structure and hydrothermal deactivation of moderate-temperature carbon materials with acidic SO3H sites
579
Solid state NMR study of dietary fiber powders from aronia, bilberry, black currant and apple
580
Solid state NMR study of phosphosilicate gels
581
Solid state NMR study of segmented polymer networks: fine-tuning of phase morphology via their molecular design
582
Solid state NMR study of sodium thiocyanate/poly(ethylene oxide) electrolytes
583
Solid state NMR study on the conformation and mobility of n-octadecyl chains in a silane coupling agent attached to the surface of colloidal silica
584
Solid State NMR, X-Ray Diffraction, and Infrared Characterization of Local Structure in Heat-Treated Oxyhydroxyapatite Microcrystals: An Analog of the Thermal Decomposition of Hydroxyapatite during PlasmaSpray Procedure
585
Solid state nuclear magnetic resonance study of highly oriented poly(glycolic acid)
586
Solid State Organometallic Chemistry. Methods and Applications, Edited by M. Gielen, R. Willem and B. Wrackmeyer, Wiley Interscience, Chichester, 1999, pp. xviii+529. ISBN 0-471-97920-1; GB £165.00
587
Solid state packing of [Rh(β-diketonato)(CO)2] complexes. Crystal structure of [Rh(PhCOCHCOC4H3S)(CO)2]
588
Solid state partitioning of trace metals in suspended particulate matter from a river system affected by smelting-waste drainage
589
Solid state phase behaviors of dodecyldimethylamine oxide: protonation and counterion effects
590
Solid state phase equilibria and intermetallic compounds of the Al–Cr–Ho system
591
Solid state phase transitions characterized by ESR and XAS
592
Solid state photochemistry of 1,4-dihydropyridines
593
Solid State Photochemistry of Isocoumarins and Isothiocoumarins
594
Solid state photocrosslinked starch based films: a new family of homogeneous modified starches
595
Solid state photoluminescence of novel lanthanide complexes based on 4-benzoylpyrazolone Schiff base
596
Solid state photophysics of a π-stacked 9,10-anthraquinone derivative oriented by cooling through a liquid crystalline phase
597
Solid state polymer light-emitting electrochemical cells: Recent developments
598
Solid state polymerization
599
Solid state Pomeranchuk effect in unstable Kondo lattice systems
600
Solid state post-polymerization of PA 6,6: The effect of sodium 5-sulfoisophthalic acid
601
Solid state potentiometric sensor at medium temperatures (150–300°C) for detecting oxidable gaseous species in air
602
Solid state potentiometric sensor for the estimation of tributyrin and urea
603
Solid state preparation of CdO nano-particles by thermolysis of a precursor as compacted nanosheet
604
Solid State Process for Preparation of Nickel Oxide Nanoparticles: Characterization and Optical Study
605
Solid state properties and thermal isomerization behaviour in polyacetylene films
606
Solid state protonic conductors, present main applications and future prospects
607
Solid State Radical Recombination and Charge Transfer across the Boundary between Indomethacin and Silica under Mechanical Stress
608
Solid state reaction between carbon fibers and metallic powder (metal = Si, Cr)
609
Solid state reaction between europium III chloride and Y-zeolites
610
Solid state reaction between tungsten and amorphous carbon
611
Solid state reaction in sandwich-type Al/Cu thin films
612
Solid state reaction in sandwich-type Al/Cu thin films
613
Solid state reaction of bifunctional bicyclo orthoesters and carboxylic acids and their metal adhesive properties
614
Solid state reaction of Fe/Ti nanometer-scale multilayers
615
Solid state reaction of ruthenium with silicon carbide, and the implications for its use as a Schottky contact for high temperature operating Schottky diodes
616
Solid state reaction of starch with thiosemicarbazide
617
Solid state reaction preparation and enhanced red luminescence of S-doped La2Mo2O9:Pr3+phosphors
618
Solid state reaction study in the systems Li2CO3–FeC2O4·2H2O and Li2CO3–Fe2(C2O4)3·6H2O
619
Solid state reaction synthesis and photoluminescence properties of Dy3+ doped NaGd(MoO4)2 phosphor
620
Solid state reaction synthesis and total electrical conductivity of La0.7Sr0.3CryMnzCo(1−y−z)O3−δ
621
Solid state reactions between CuO and Cu(Al) or Cu9Al4 in mechanically milled composite powders
622
Solid state reactions between CuO and Cu(Al) or Cu9Al4 in mechanically milled composite powders
623
Solid state reactions in Al–Cu–Fe thin film systems
624
Solid state reactions in Fe–Si system under HIPping pressure
625
Solid state reactions in highly dispersed single and mixed lanthanide oxide–SiO2 systems
626
Solid state reactions in nanometer scaled diffusion couples prepared using high energy ball milling
627
Solid state reactions in nanometer scaled diffusion couples prepared using high energy ball milling
628
Solid state reactions in Ni-Al-Ti-C system by mechanical alloying
629
Solid state reactions of alkali metal chlorides with acid tantalum phosphate, acid zirconium phosphate and vanadium oxyphosphate
630
Solid state reactions of CeO2, PuO2, (U,Ce)O2 and (U,Pu)O2 with K2S2O8
631
Solid state reactions of nanocrystalline Ce0.5Yb0.5O1.75 mixed oxide with high surface area silica in oxidizing and reducing atmosphere
632
Solid state reactions of UO2, ThO2 and (U,Th)O2 with ammonium nitrate
633
Solid state reactions of UO2,ThO2 and their mixed oxides with sulphates of potassium
634
Solid state reduction of a natural ilmenite
635
Solid State Reduction of Chromite in High Carbon Ferrochromium-Chromite Composite Pellets
636
Solid state reduction of Panzhihua titanomagnetite concentrates with pulverized coal
637
Solid state Si diffusion and joint formation involving aluminum brazing sheet
638
Solid state Si diffusion and joint formation involving aluminum brazing sheet
639
Solid state Si diffusion and joint formation involving aluminum brazing sheet
640
Solid state sintering and high temperature compression properties of Al-alloy5000/AlN nanocomposites
641
Solid state sintering and high temperature compression properties of Al-alloy5000/AlN nanocomposites
642
Solid state sintering of nano-crystalline indium tin oxide
643
Solid state sintering of red ceramics at lower temperatures
644
Solid state sintering of very low and negative thermal expansion ceramics by Spark Plasma Sintering
645
Solid state spreading in the Cu/Cu system
646
Solid state stacked trimers of 1,10-phenanthroline in a supramolecular tubular motif of C-methyl calix[4]resorcinarene
647
Solid state structural analysis of new pentamidine analogs designed as chemotherapeutics that target DNA by X-ray diffraction and 13C, 15N CP/MAS NMR methods
648
Solid state structural studies of five bile acid derivatives
649
Solid state structural study on recognition of aromatic dicarboxylic acids by substituted amino-pyrimidines and its supramolecular network
650
Solid state structure and oxygen transport properties of copolyesters based on smectic poly(hexamethylene 4,4′-bibenzoate)
651
Solid state structure by X-ray and 13C CP/MAS NMR of new 5,5′-diethoxy-3,3′-methanediyl-bis-indole
652
Solid state structure by X-ray and 13C CP/MAS NMR of new 7-[2-(N,N-diisopropylamino)ethoxy]coumarins
653
Solid state structure of chitosan prepared under different N-deacetylating conditions
654
Solid state structure of P(o-(CF3)Ph)3 substituted Rh2(CO)4(μ-Cl)2. Formation of dimeric [Rh2(CO)3(μ-Cl)2{P(o-(CF3)Ph)3}]2
655
Solid state structure of WCl2(OCH2CH2CH2CH2PPh2)2 and π-bonding ability of alkoxide in chelating PO ligand
656
Solid state structure–property behavior of semicrystalline poly(ether-block-amide) PEBAX® thermoplastic elastomers
657
Solid State Structures of Amide-Substituted 8-Hydroxyquinoline Derivatives
658
Solid state structures of pentacoordinated (lambda)3-iodanes with a trigonal bipyramidal geometry: synthesis of diphenyl- and alkynyl(phenyl)-(lambda)3-iodane complexes with 1,10-phenanthroline
659
Solid state studies of the C60. 2(CH3)CCl3 solvate Original Research Article
660
Solid state studies on Bi1.7−xHgxV8O16 (x ≤ 0.4) and magnetic properties of alkali metal inserted AxBi1.7V8O16 (A = Li and Na) hollandite type phases
661
Solid state studies on C60 solvates formed with n-alcanes: orthorhombic C60 · 2/3 n-nonane
662
Solid state studies on K2Ti6−xNbxFe2O16 (x = 0 and 1) and lithium insertion into K2Ti6M2O16 (M = Cr, Fe and Ga) and K2Ti5NbFe2O16 hollandite type phases
663
Solid state study of sulfoxide adducts of (2-amidoethyl-C,O)trihalostannanes: Supramolecular networks constructed from hydrogen-bonds involving the amido units
664
Solid state surface and interface spreading: An experimental study
665
Solid state syntheses of nano lead(II) iodide triazole carboxylate coordination polymer from its bromide/thiocyanate/chloride analogs via mechanochemical crystal to crystal transformations
666
Solid state synthesis of Al-based amorphous and nanocrystalline Al–Cu–Nb alloys
667
Solid state synthesis of Al-based amorphous and nanocrystalline Al–Cu–Nb alloys
668
Solid state synthesis of hydrous ruthenium oxide for supercapacitors
669
Solid state synthesis of lithiated manganese oxides from mechanically activated Li2CO3–Mn3O4 mixtures
670
Solid state synthesis of MgAl2O4 nanomaterials and solar light-induced photocatalytic removal of Malachite green
671
Solid state synthesis of Mg–Ni ferrite and characterization by XRD and XPS
672
Solid state synthesis of nano-boehmite-derived CuAlO2 powder and processing of the ceramics
673
Solid state synthesis of nanocrystalline and/or amorphous 50Ni–50Ti alloy
674
Solid state synthesis of nanocrystalline and/or amorphous 50Ni–50Ti alloy
675
Solid state synthesis of NiAl–Nb composites from fine elemental powders
676
Solid state synthesis of NiAl–Nb composites from fine elemental powders
677
Solid state synthesis of NiO nanoparticles from [(1,2-bis(2-formyl-3- methoxyphenyl)propane)nickel(II)] chloride
678
Solid state synthesis of NiO nanoparticles from [(1,2-bis(2-formyl-3-methoxyphenyl)propane)nickel(II)] chloride
679
Solid state synthesis of SrAl2O4:Mn2+ co-doped with Nd3+ phosphor and its optical properties
680
Solid state synthesis of stoichiometric LiCoO2 from mechanically activated Co–Li2CO3 mixtures
681
Solid state synthesis of strontium oxoferrates from the mechanically activated system SrCO3–Fe2O3
682
Solid State Synthesis of Ternary Thermoelectric Magnesium Alloy, Mg2Si1-xSnx
683
Solid state synthesis of water-dispersible silicon nanoparticles from silica nanoparticles
684
Solid state synthesis, characterization and thermogravimetric study of the adducts CoCl2·6L (L = ethyleneurea, propyleneurea and ethylenethiourea)
685
Solid state synthesis, crystal structure, evaluation of direct and indirect band gap energies and optimization of reaction parameters for As2Ni3O8 nanomaterials
686
Solid state synthesis, structure and optical limiting properties of seleno cuboidal clusters [M3Se4X3(diphosphine)3] + (M=Mo, W; X=Cl, Br)
687
Solid state synthesis, structures and redox properties of the new [Mo6Bri7TeiBra6]3− and [Mo6Bri7SeiBra6]3− octahedral cluster units: Crystallochemistry of the Rb2+xMo6Bri8−xYixBra6 series (x=0.5 for Y=Te; 0.25⩽x⩽0.7 for Y=Se) and Rb2Mo6Br14
688
Solid state synthesis, thermodynamics and catalytic combustion effect of a high energy nickel(II) coordination compound
689
Solid state synthesis, thermodynamics and catalytic combustion effect of a high energy nickel(II) coordination compound
690
Solid state thermochemical decomposition of neat 1,3,5,5-tetranitrohexahydropyrimidine (DNNC) and its DNNC-d6 perdeuterio-labeled analogue
691
Solid state thin-film lithium battery systems
692
Solid state transformations of Au-Cu-Pt alloys studied by in-situ X-ray synchrotron radiation and DSC
693
Solid state vibrational spectroscopy of anhydrous lithium hexafluorophosphate (LiPF6)
694
Solid state vitrification of crystalline and -D-glucose by mechanical milling
695
Solid state, dry zinc/MCM-41/air cell as relative humidity sensor
696
Solid state-reaction between Ir and Al2O3
697
Solid state-specific and chiral lattice-controlled asymmetric photoisomerization of 3-substituted propyl cobalt complexes, and direct observation of the intermediate complex
698
Solid structure and photoluminescence of zinc(II) multiplex with heptadentate salicylideneamine as primary ligand
699
Solid structure formation during the liquid/solid phase transition
700
Solid Substrate Fermentation of Monascus purpureus: Growth, Carbon Balance, and Consistency Analysis
701
SOLID SUBSTRATE PHOSPHORESCENT IMMUNOASSAY BASED ON BIOCONJUGATED NANOPARTICLES
702
Solid substrate production of Epicoccum nigrum conidia for biological control of brown rot on stone fruits
703
Solid substrate room temperature phosphorescence immunoassay based on an antibody labeled with tetramethylrhodamine B isothiocyanate Original Research Article
704
Solid substrate-room temperature phosphorimetry for the determination of residual clenbuterol hydrochloride based on the catalysis of sodium periodate oxidizing eosine Y Original Research Article
705
Solid superacid catalyzed fatty acid methyl esters production from acid oil
706
Solid support oligosaccharide synthesis and combinatorial carbohydrate libraries: Peter H. Seeberger (Ed.); Wiley, Chichester, 2001, x+308 pp., ISBN 0-471-37828-3, £71.50
707
Solid support synthesis of 15-membered macrocycles containing a serotonin unit
708
Solid support synthesis of 2,4-disubstituted thiazoles and aminothiazoles
709
Solid support synthesis of 6-aryl-2-substituted pyrimidin-4-yl phenols as anti-infective agents
710
Solid Support-Bound Synthesis of Polyfunctional Unsymmetrical Ureas
711
Solid supported active esters as linkers: modification of reactivity using iron carbonyl complexes
712
Solid supported chiral auxiliaries in asymmetric synthesis. Part 2: Catalysis of 1,3-dipolar cycloadditions by Mg(II) cation
713
Solid supported high-throughput organic synthesis of peptide β-turn mimetics via tandem Petasis reaction/diketopiperazine formation
714
Solid supported lipid bilayers: From biophysical studies to sensor design
715
Solid supported micellar catalysis: some syntheses and characterisations
716
Solid supported palladium(0) nano/microparticle: a ligand-free efficient recyclable heterogeneous catalyst for mono- and β,β-double-Heck reaction
717
Solid supported Pd(0): an efficient recyclable heterogeneous catalyst for chemoselective reduction of nitroarenes
718
Solid supported rhodium(0) nanoparticles: an efficient catalyst for chemo- and regio-selective transfer hydrogenation of nitroarenes to anilines under microwave irradiation
719
Solid supported Ru(0) nanoparticles: an efficient ligand-free heterogeneous catalyst for aerobic oxidation of benzylic and allylic alcohol to carbonyl
720
Solid supported synthesis of structurally diverse dihydropyrido[2,3-d]pyrimidines using microwave irradiation
721
Solid Supports in Enzyme-Linked Immunosorbent Assay and Other SolidPhase Immunoassays
722
Solid surface dependent layering of self-arranged structures with fibril-like assemblies of alpha-synuclein
723
Solid surface mapping by inverse gas chromatography
724
Solid surface room temperature phosphorescence of tetracycline antibiotics
725
Solid surface room temperature phosphorimetry analysis of yohimbine hydrochloride in pharmaceutical formulations
726
Solid targetry at the TESLA Accelerator Installation
727
Solid targetry at the TESLA Accelerator Installation
728
Solid tethered imino-bis-propanediol and quaternary amine functional copolymer brushes for rapid extraction of trace boron Original Research Article
729
Solid tidal friction above a liquid water reservoir as the origin of the south pole hotspot on Enceladus
730
Solid timber beams strengthened with steel plates – Experimental studies
731
Solid transport in a pyrolysis pilot-scale rotary kiln: preliminary results—stationary and dynamic results
732
Solid Trichlorotitanium (IV) Trifluoromethanesulfonate TicL3 (OTf) Catalyzed Highly Efficient Protection of Aldeyhydes as their Acylals at Room Temperature under Solvent-Free Conditions
733
Solid triphenylmethanol: A molecular material that undergoes multiple internal reorientational processes on different timescales
734
Solid T-spline construction from boundary representations for genus-zero geometry
735
Solid tumors after heart transplantation: Lethality of lung cancer
736
Solid tumors associated with multiple endocrine neoplasias
737
Solid tumors in cardiac allograft recipients
738
Solid Tumors of the Lateral Ventricle: Endoscopic Assisted Microsurgical Excision through Transcortical and Transcallosal Approaches
739
Solid tumour growth analysis of necrotic core formation
740
Solid type dye-sensitized solar cell using polysaccharide containing redox electrolyte solution
741
Solid variant of aneurysmal bone cyst with a novel (X;9) translocation
742
Solid waste as renewable source of energy: current and future possibility in Algeria
743
Solid waste characteristics in an operating landfill in a developing country
744
Solid waste characterization and recycling potential for a university campus
745
Solid Waste Characterization in Ethiope East Local Government Area Of Delta State, Abraka, Nigeria
746
Solid Waste Co-Conversion by Hydrothermal Treatment using Natural Zeolite
747
Solid waste collection by the private sector: Households’ perspective—Findings from a study in Dar es Salaam city, Tanzania
748
Solid waste deposits as a significant source of contaminants of emerging concern to the aquatic and terrestrial environments — A developing country case study from Owerri, Nigeria Original Research Article
749
solid waste estimation per capita in equity girls hostel blocks, igbinedion university okada, nigeria
750
Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents
751
Solid Waste Landfills as a Source of Green Energy: Case Study of Al Akeeder Landfill
752
Solid waste management and the urban community: A case study in Kuching city
753
Solid Waste Management Baling Scheme Economics Methodology
754
Solid waste management beliefs and practices in rural households towards sustainable development and pro-environmental citizenship
755
Solid waste management in Abuja, Nigeria
756
Solid Waste Management in Commercial City of Bangladesh
757
Solid waste management in Indian Himalayan tourists’ treks: a case study in and around the Valley of Flowers and Hemkund Sahib
758
Solid waste management in Macao: Practices and challenges
759
Solid waste management in New Zealand
760
Solid waste management practices and review of recovery and recycling operations in Turkey
761
Solid Waste Management System Analysis by Multiobjective Mixed Integer Programming Model
762
Solid waste management system for small island developing states
763
Solid waste plasma disposal plant
764
Solid waste plasma gasification: Equilibrium model development and exergy analysis
765
Solid Waste Production and Its Management in Dental Clinics in Gorgan, Northern Iran
766
Solid waste treatment within the framework of life-cycle assessment
767
Solid waste: terminological and long-term environmental risk assessment problems exemplified in a power plant fly ash study
768
Solid Wastes Composition and Generation in Selected Hotels at Aba and Umuahia, Abia State, Nigeria
769
Solid Wastes Generation in Covenant University, Ota, Nigeria: Characterisation and Implication for Sustainable Waste Management
770
Solid wastes generation in India and their recycling potential in building materials
771
Solid wastes integrated management in Rio de Janeiro: input–output analysis
772
Solid, cystic and vanishing tumors of the pancreas
773
Solid, shape recovered “Bulk” nitinol: Part II—Mechanical properties
774
Solid, shape recovered “bulk” Nitinol: Part I—Tension–compression asymmetry
775
Solid/liquid- and vapor-phase interactions between cellulose- and lignin-derived pyrolysis products
776
Solid/liquid- and vapor-phase interactions between cellulose- and lignin-derived pyrolysis products
777
Solid/liquid erosion behavior of gas tungsten arc welded TiNi overlay
778
Solid/liquid interfacial tension as a tool to study stability of lysozyme on adsorption to solid surfaces
779
Solid/liquid Phase Microextraction of Anticancer Drug Cisplatin by Using a Hollow Fiber Reinforced with Multiwalled Carbon Nanotube- Ion Exchange Polyurethane Foam, and Determination by Graphite Furnace Atomic Absorption Spectrometry
780
Solid/liquid separation behavior of alum and polyaluminium chloride coagulation flocs
781
Solid/solid separation by selective agglomeration with agglomerant recovery by thermal desorption
782
Solid/vapour sorption heat transformer: Design and performance
783
Solid¯liquid mass transfer limitation of ferrous iron in the chemical oxidation of FeS2 at high redox potential
784
Solidang, a computer code for the computation of the effective solid angle and correction factors for gamma spectroscopy-based waste assay
785
Solid–aqueous solution interface phenomena at the molecular level
786
Solidarity and Akcja Wyborcza ‘Solidarnoscʹ. An attempt at reviving the legend
787
Solidarity and conflicts in coresidence of three-generational immigrant families from the former Soviet Union
788
Solidarity Day at Unión Fenosa in Spain
789
Solidarity in Indonesian conversation: The discourse marker ya
790
Solidarity in the Time of COVID-19 Pandemic
791
Solidarity through collaborative research
792
Solidarity, justice and health care priorities : Edited by Zbigniew Szawarski and Donald Evans. Health Service Studies 8, Linkimageping University, Linkimageping, Sweden, 1993. 128 pp., U.S.$25.00
793
Solid-assisted melt disintegration (SAMD), a novel technique for metal powder production
794
Solid-bound, proton-driven, fluorescent ‘off–on–off’ switches based on PET (photoinduced electron transfer)
795
Solid-calcified colloid cyst of the third ventricle
796
Solid-CdS and hollow-ZnS porous submicrospheres: Direct preparation by C–S decomposition of thiol via solvothermal processing
797
Solid-contact Hg(II)-selective electrode based on a carbon-epoxy composite containing a new dithiophosphate-based ionophore
798
Solid-contact ion-selective electrode with stable internal electrode
799
Solid-contact ion-selective electrodes for aromatic cations based on π-coordinating soft carriers
800
Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range
801
Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range Original Research Article
802
Solid-contact potentiometric polymer membrane microelectrodes for the detection of silver ions at the femtomole level
803
Solid-contact potentiometric polymer membrane microelectrodes for the detection of silver ions at the femtomole level
804
Solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles as ionophore
805
Solid-electrolyte NASICON thick film CO2 sensor prepared on small-volume ceramic tube substrate
806
Solid-emissive boron–fluorine derivatives with large Stokes shift
807
Solid–extracellular fluid interaction and damage in the mechanical response of rat brain tissue under confined compression
808
Solid–fluid diffuse interface model in cases of extreme deformations
809
Solid–fluid equilibria in natural gas systems
810
Solid–fluid equilibrium for organic molecules: understanding the link between molecular structure and phase diagrams
811
Solid–fluid phase behaviour of linear polyethylene solutions in propane, ethane and ethylene at high pressures
812
Solid–fluid phase equilibria of compositionally complex mixtures: contrast of equilibrium and process treatments
813
Solid–fluid phase transitions under extreme pressures including negative ones
814
Solid–fluid phase transitions under extreme pressures including negative ones
815
Solid-fuel household cook stoves: Characterization of performance and emissions
816
Solid–gas and electrochemical hydrogenation properties of pseudo-binary (Ti,Zr)Ni intermetallic compounds
817
Solid–gas carbonylation of aryloxide rhodium(I) complexes: stepwise reaction forming Vaska-type complexes
818
Solid–gas reactions of complex oxides inside an environmental high-resolution transmission electron microscope
819
Solid-hydroxide-proton conductors in new electrochemical cells “hydrogenated metal–protonics”
820
Solidification analysis of a single particle with encapsulated phase change materials
821
Solidification and abrasion wear of white cast irons alloyed with 20% carbide forming elements
822
Solidification and casting/mould interfacial heat transfer characteristics of aluminum matrix composites
823
Solidification and compositional convection of a ternary alloy
824
Solidification and computational analysis of o-nitroaniline–α-naphthol eutectic system
825
Solidification and control of a liquid metal column
826
Solidification and convection of a ternary solution cooled from the side
827
Solidification and grain refinement in Ti45Al2Mn2Nb1B
828
Solidification and grain refinement in Ti45Al2Mn2Nb1B subjected to fast cooling
829
Solidification and high-temperature phase equilibria in the Fe–Al-rich part of the Fe–Al–Nb system
830
Solidification and melting behaviors and characteristics of molten salt in cold filling pipe
831
Solidification and melting of gallium and mercury in porous glasses as studied by NMR and acoustic techniques
832
Solidification and microstructural characterisation of iron–chromium based hardfaced coatings deposited by SMAW and electric arc spraying
833
Solidification and modeling of cast iron—A short history of the defining moments
834
Solidification and recycling of incinerator bottom ash through the addition of colloidal silica (SiO2) solution
835
Solidification and Stabilization of Asbestos Brake Lining Dust Using Polymeric Resins
836
Solidification and stabilization of Pb, Zn, Cd and Cu in tailing wastes using cement and fly ash
837
Solidification and Thermal Performance Analysis of the Low Carbon Steel During the Continuous Casting Process
838
Solidification behavior of a Ni-based single crystal CMSX-4 superalloy solidified by downward directional solidification process
839
Solidification behavior of Al–20.6%Cu alloy under AC magnetic field
840
Solidification behavior of cast TiB2 particulate reinforced Mg composites
841
Solidification behavior of PLLA/nHA nanocomposites
842
Solidification behavior of Sn–9Zn–xAg lead-free solder alloys
843
Solidification behavior of Ti5Si3 whiskers in TiAl alloys
844
Solidification behavior of Ti5Si3 whiskers in TiAl alloys
845
Solidification behavior of undercooled Cu70Ni30 alloy melt
846
Solidification behavior of undercooled Cu70Ni30 alloy melt
847
Solidification behavior of γ′-Ni3Al-containing alloys in the Ni–Al–O system Original Research Article
848
Solidification behavior, glass forming ability and thermal characteristics of soft magnetic Fe–Co–B–Si–Nb–Cu bulk amorphous alloys
849
Solidification behavior, microstructure and tensile properties of ZK60-Er magnesium alloys
850
Solidification behaviour and microstructural correlations in magnetocaloric Gd–Si–Ge–Nb alloys
851
Solidification behaviour and phase formation during pre-placed laser cladding of Ti45Nb on mild steel
852
Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process
853
Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process Original Research Article
854
Solidification behaviour of Sn droplets embedded in an icosahedral Al-Cu-Fe matrix
855
Solidification behaviour of Sn droplets embedded in an icosahedral Al-Cu-Fe matrix
856
Solidification behaviour of TiAl-based alloys studied by directional solidification technique
857
Solidification behaviour of undercooled Co–Cu alloys showing a metastable miscibility gap
858
Solidification behaviour of undercooled Co–Cu alloys showing a metastable miscibility gap
859
Solidification behaviour under intensive forced convection
860
Solidification behaviour, microstructure and mechanical properties of high Fe-containing Al–Si–V alloys
861
Solidification characteristics of polymer solution during polyvinylidene fluoride membrane preparation by nonsolvent-induced phase separation
862
Solidification characteristics of rising immiscible oil droplets in coolant
863
Solidification characteristics of Tb0.27Dy0.73Fex (x = 1.8, 1.95) alloys during the directional solidification
864
Solidification characterization of a new rapidly solidified Ni–Cr–Co based superalloy
865
Solidification contact angles of molten droplets deposited on solid surfaces
866
Solidification cooling rate and as-cast textures of low-carbon steel strips
867
Solidification cracking of superalloy single- and bi-crystals Original Research Article
868
Solidification effects on sill formation: An experimental approach
869
Solidification from undercooled melts
870
Solidification from undercooled melts
871
Solidification in remelting processes
872
Solidification inside a sphere—an experimental study
873
Solidification interface morphology pattern in the undercooled Co–24.0 at.% Sn eutectic melt Original Research Article
874
Solidification mechanism of allophane by hydrothermal reaction
875
Solidification Mechanism of the Sediment Formed by Particle Settling — Analysis of the Final State of the Sediment
876
Solidification mechanism of the sediment formed by particle settling – Analysis of the formation of the solidified layer
877
Solidification microstructure affecting ductility in semi-solid-cast products
878
Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu–Fe alloys Original Research Article
879
Solidification microstructure formation in the Al-rich Al–La–Ni system
880
Solidification microstructure formation in the Al-rich Al–La–Ni system
881
Solidification microstructures and mechanical properties of high-vanadium Fe–C–V and Fe–C–V–Si alloys
882
Solidification microstructures and solid-state parallels: Recent developments, future directions Original Research Article
883
Solidification microstructures in the rapidly solidified powder of high alloyed V–Cr tool steel
884
Solidification microstructures: recent developments, future directions Original Research Article
885
Solidification Modeling and Dendrite Structure Analysis in a Horizontal Continuously Cast Brass Billet
886
Solidification modeling in continuous casting by finite point method
887
Solidification modelling with a control volume method on domains subjected to viscoplastic deformation
888
Solidification modes and microstructure of Fe–Cr alloys solidified at different undercoolings
889
Solidification modes and microstructure of Fe–Cr alloys solidified at different undercoolings
890
Solidification observations and sliding wear behavior of vacuum arc melting processed Ni–Al–TiC composites
891
Solidification observations of vacuum arc melting processed Fe–Al–TiC composites: TiC precipitation mechanisms
892
Solidification of a 2-D semitransparent medium using the lattice Boltzmann method and the finite volume method
893
Solidification of a binary alloy: Finite-element, single-domain simulation and new benchmark solutions
894
Solidification of a binary mixture in a shear flow
895
Solidification of a finite slab with convective cooling and shrinkage
896
Solidification of a PEG 1500-epoxy nanocomposite around a horizontal pipe
897
SOLIDIFICATION OF A PURE METAL WITH FINITE THERMAL CAPACITANCE ON A SINUSOIDAL MOLD SURFACE
898
Solidification of a supercooled liquid in stagnation-point flow
899
Solidification of a ternary alloy liquid layer on a substrate subject to self-consistent melting
900
Solidification of a ternary melt from a cooled boundary, or nonlinear dynamics of mushy layers
901
Solidification of Al2O3–YAG eutectic composites with off-metastable eutectic composition from undercooled melt produced by melting Al2O3–YAP eutectics
902
Solidification of Al–50 at.%Si alloy in a drop tube
903
Solidification of Al–50 at.%Si alloy in a drop tube
904
Solidification of Al–50 at.%Si alloy in a drop tube
905
Solidification of aqueous ammonium chloride in a rectangular cell under constant wall temperature - an experimental study
906
Solidification of AZ31 magnesium alloy plate in a horizontal continuous casting process
907
Solidification of borate radioactive resins using sulfoaluminate cement blending with zeolite
908
Solidification of coal fly ash using hydrothermal processing method
909
Solidification of electroplating sludge using alkali-activated pulverized fuel ash as cementitious binder
910
Solidification of high-Cr white cast iron–WC particle reinforced composites
911
Solidification of highly undercooled Si and Si–Ge melts
912
Solidification of high-refractory ruthenium-containing superalloys Original Research Article
913
Solidification of hydatid cyst fluid with an injectable chitosan/carboxymethylcellulose/β-glycerophosphate hydrogel for effective control of spillage during aspiration of hydatid cysts
914
Solidification of hydatid cyst fluid with an injectable chitosan/carboxymethylcellulose/β-glycerophosphate hydrogel for effective control of spillage during aspiration of hydatid cysts
915
Solidification of Hydrogen Clusters Including a Foreign Molecule
916
Solidification of liquid electrolyte with imidazole polymers for quasi-solid-state dye-sensitized solar cells
917
Solidification of metal foams Original Research Article
918
Solidification of metallic tin in dispersed phase
919
Solidification of Nano-Enhanced Phase Change Material (NEPCM) in an Enclosure
920
Solidification of nanostructured lipid carriers (NLCs) onto pellets by fluid-bed coating: Preparation, in vitro characterization and bioavailability in dogs
921
Solidification of PCM around a curved tube
922
Solidification of pcm inside a spherical capsule
923
Solidification of phase change material on vertical cylindrical surface in holdup air bubbles
924
Solidification of Precirol® by the expansion of a supercritical fluid saturated melt: From the thermodynamic balance towards the crystallization aspect
925
Solidification of Sr-containing stripping solutions in titanate ceramics
926
Solidification of superalloy in a SiO2–ZrO2–B2O3 coating mould
927
Solidification of Tank Bottom Sludge
928
Solidification of undercooled eutectic alloys containing a third element Original Research Article
929
Solidification of undercooled peritectic Fe-Ge alloy
930
Solidification paths and eutectic intermetallic phases in Mg-Al-Ca ternary alloys
931
Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys Original Research Article
932
Solidification paths for an icosahedral quasicrystalline phase in cast Al62Cu25.5Fe12.5 and Al55Cu25.5Fe12.5Be7 alloys
933
Solidification paths of multicomponent monotectic aluminum alloys Original Research Article
934
Solidification phases and liquidus surface of the Al-Ni-Ru system above 50 at.% aluminium
935
Solidification phases and their evolution during homogenization of a DC cast Al–8.35Zn–2.5Mg–2.25Cu alloy
936
Solidification phenomena in Ge films upon nano- and pico-second laser pulse melting
937
Solidification processing of alloys in the pseudo-binary PbTe–Sb2Te3 system Original Research Article
938
Solidification processing of high temperature intermetallic eutectic-based alloys
939
Solidification processing of high temperature intermetallic eutectic-based alloys
940
Solidification Properties of CaO-SiO2-TiO2 Based Mold Fluxes Original Research Article
941
Solidification sequence of the icosahedral quasicrystal forming Al–Cu–Fe alloys
942
Solidification sequence of the icosahedral quasicrystal forming Al–Cu–Fe alloys
943
Solidification shrinkage of Ni–Cr alloys
944
Solidification Simulation of Single Crystal Investment Castings
945
Solidification structure and crystallographic texture of strip casting 3 wt.% Si non-oriented silicon steel
946
Solidification structure formation in undercooled Fe–Ni alloy Original Research Article
947
Solidification Structure Formation of Undercooled Single Phase Alloys
948
Solidification structure in pure zirconia liquid molten phase
949
Solidification structure of C2.08Cr25.43Si1.19Mn0.43Fe70.87 powders fabricated by high pressure gas atomization
950
Solidification structure of CaO–SiO2–MgO–Al2O3 (–CaF2) systems and computational phase equilibria: Crystallization of MgAl2O4 spinel
951
Solidification structure of CaO–SiO2–MgO–Al2O3 (–CaF2) systems and computational phase equilibria: Crystallization of MgAl2O4 spinel
952
Solidification structure of undercooled Ni54.6Pd45.4 alloy
953
Solidification Structure Refining of 430 Ferrite Stainless Steel With TiN Nucleation Original Research Article
954
Solidification structures and phase selection of iron-bearing eutectic particles in a DC-cast AA5182 alloy Original Research Article
955
Solidification temperature of silicon surface layer melted by pulsed laser irradiation
956
Solidification using smoothed particle hydrodynamics
957
Solidification velocity of undercooled Ni–Cu alloys Original Research Article
958
Solidification with a quasiequilibrium two-phase zone Original Research Article
959
Solidification with water as a treatment method for air pollution control residues
960
Solidification, solution treatment and age hardening of a Mg-1.6 wt.% Ca-3.2 wt.% Zn alloy
961
Solidification, solution treatment and age hardening of a Mg–1.6 wt.% Ca–3.2 wt.% Zn alloy Original Research Article
962
Solidification/stabilisation of arsenic bearing fly ash from the metallurgical industry. Immobilisation mechanism of arsenic
963
Solidification/stabilisation of arsenic-containing waste: Leach tests and behaviour of arsenic in the leachate
964
Solidification/stabilization of Cr(VI) with cement: Leachability and XRD analyses
965
Solidification/Stabilization of Fe(II)-Treated Cr(VI)-Contaminated Soil
966
Solidification/Stabilization of Hazardous Wastes Containing Metals and Organic Contaminants
967
Solidification/Stabilization of Heavy Metals from Air Heater Washing Wastewater Treatment in Thermal Power Plants
968
Solidification/stabilization of Ni(II) by various cement pastes
969
Solidification/stabilization of toxic metal wastes using coke and coal combustion by-products
970
Solidification/stabilization Treatment of Spent Catalyst (V2O5) from a Sulfuric Acid Plant using Ordinary Portland Cement (OPC) and an Additive
971
Solidification–microprestress–microplane (SMM) theory for concrete at early age: Theory, validation and application
972
Solidificationoflow-level-radioactiveresinsinASC-zeoliteblendsOriginalResearchArticle
973
Solidified floating organic drop microextraction and spectrophotometric determination of vanadium in water samples
974
Solidified floating organic drop microextraction combined with ETV-ICP-MS for the determination of trace heavy metals in environmental water samples
975
Solidified floating organic drop microextraction for speciation of selenium and its distribution in selenium-rich tea leaves and tea infusion by electrothermal vapourisation inductively coupled plasma mass spectrometry
976
Solidified ionic liquid as crystalline sensing element of the bromide selective electrode
977
Solidified liquid layer model makes quartz crystal microbalance a convenient molecular ruler
978
Solidified Reverse Micellar Solution (SRMS)-Based Indomethacin Sustained-Release Tablets: Formulation and In vitro Evaluation
979
Solidifying liquid electrolytes with fluorine polymer and silica nanoparticles for quasi-solid dye-sensitized solar cells
980
Solidity is an imperfect state Original Research Article
981
Solid-like components in carbohydrate gels probed by NMR spectroscopy
982
Solid–liquid and liquid–liquid equilibria for 1,3,5-trioxane, or 1,4,7,10,13,16-hexaoxacyclooctadecane + selected n-alkane mixtures: Analysis in terms of DISQUAC
983
Solid–liquid distribution of selected concrete admixtures in hardened cement pastes
984
Solid–liquid equilibria and binodals of liquid–liquid equilibria for the quaternary systems aqueous solution+binary fatty acids
985
Solid–liquid equilibria and purity determination for binary n-alkane + naphthalene systems
986
Solid–liquid equilibria and the physical properties of binary systems of diphenyl carbonate, dimethyl carbonate, methyl phenyl carbonate, anisole, methanol and phenol
987
Solid–liquid equilibria based on an equation of state for chain fluids
988
Solid–liquid equilibria for binary and ternary systems with the Cubic-Plus-Association (CPA) equation of state
989
Solid–liquid equilibria for binary mixtures of N-phenylacetamide with 4-aminoacetophenone, 3-hydroxyacetophenone and 4-hydroxyacetophenone
990
Solid–liquid equilibria for systems containing 1-butyl-3-methylimidazolium chloride
991
Solid-liquid equilibria for systems containing long-chain 1-alkanols I. Experimental data for 1-dodecanol, 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-icosanolbenzene or toluene mixtures. Characterization in terms of DISQUAC
992
Solid-liquid equilibria for systems containing long-chain 1-alkanols III. Experimental data for 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-icosanol + 1-butanol, 1-hexanol, 1-octanol or 1-decanol mixtures. Characterization in terms of DISQUAC
993
Solid-liquid equilibria for systems containing long-chain 1-alkanols. II. Experimental data for 1-dodecanol, 1-tetradecanol, 1-hexadecanol, 1-octadecanol or 1-eicosanol + CCl4 or + cyclohexane mixtures. Characterization in terms of DISQUAC
994
Solid-liquid equilibria in binary mixtures of organic compounds
995
Solid–liquid equilibria in l-leucine + l-valine + water
996
Solid–liquid equilibria in l-leucine + l-valine + water
997
Solid–liquid equilibria in the acetic acid–propanoic acid and propanoic acid–trifluoroacetic acid systems
998
Solid–liquid equilibria in the quasi-binary thallium(I) selenide–tin(IV) selenide system
999
Solid–liquid equilibria in the quasi-binary thallium(I) selenide–tin(IV) selenide system
1000
Solid–liquid equilibria in the quasi-binary thallium(I) telluride–indium(III) telluride system