ليست عنوان مقالات لاتين Study on properties of BaxSmyTi7O20 ceramics with CaO–SiO2–B2O3 glass Study on the Intentional Choice Mechanism of Course Selection Based on Swarm Intelligence Algorithm

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Study on properties of BaxSmyTi7O20 ceramics with CaO–SiO2–B2O3 glass

2

Study on properties of CaO–SiO2–B2O3 system glass-ceramic

3

Study on Properties of LSGM Electrolyte Made by Tape Casting Method and Applications in SOFC

4

Study on properties of recycled tire rubber modified asphalt mixtures using dry process

5

Study on Properties of the k − ω Model for Stellar Convection

6

Study on Protease from Barley Tempeh and in vitro Protein Digestibility

7

Study on protein adsorption kinetics to a dye–ligand adsorbent by the pore diffusion model

8

Study on protein Changes in wheat under drought stress

9

Study on protein Changes in wheat under drought stress

10

Study on pseudo gap formation in Cu-oxides at high temperatures

11

Study on PSN–PZN–PZT quaternary piezoelectric ceramics near the morphotropic phase boundary

12

Study on Pt/Al-MCM-41 for NO selective reduction by hydrogen

13

Study on Pullout Behavior of Uniaxial HDPE Geogrids Under Monotonic and Cyclic Loads

14

Study on pulsed-discharge devices with high current rising rate for point spot short-wavelength source in dense plasma observations

15

Study on pulsed-discharge devices with high current rising rate for point spot short-wavelength source in dense plasma observations

16

Study on pump combinations for improving delivery rates of hydrogen

17

Study on punch load of non-axisymmetric deep drawing product according to blank shape

18

Study on purification and application of novel precipitant for ceria-based polishing powder

19

Study on purification and tip-opening of CNTs fabricated by CVD

20

Study on pyrolysing behavior of NiO–SDC composite particles prepared by spray pyrolysis technique

21

Study on pyrolysis characteristics of refuse plastic fuel using lab-scale tube furnace and thermogravimetric analysis reactor

22

Study on pyrolysis characteristics of refuse plastic fuel using lab-scale tube furnace and thermogravimetric analysis reactor

23

Study on QOS Routing in Network Centric Warfare

24

Study on QPVA/TEOS hybrid anion membrane functionalized with quaternary ammonium groups for adsorption of Rhodamine B from aqueous solutions

25

Study on Quality and Quantitative of Dead Wood in Beech of Shast-kolate Forest and Compare with Europe Beech Forest

26

Study on Quantitative and Qualitative Traits Diversity in Some Momordica charantia L. Genotypes

27

Study on quantitative classification of seasonal snow using specific surface area and intrinsic permeability

28

Study on quantitative expression pattern of oxalate oxidase and B-1, 3 glucanase genes under Fusarium graminearum treatment in wheat by quantitative Real time PCR.

29

Study on quantitative structure–activity relationship of quaternary ammonium salt collectors for bauxite reverse flotation

30

Study on quantitative structure–toxicity relationships of benzene derivatives acting by narcosis Original Research Article

31

Study on quantum interference effects of 1s ortho-excitons in Cu2O

32

Study on radiation flux of the receiver with a parabolic solar concentrator system

33

Study on radiation use efficiency of different sugar beet cultivars

34

Study on rail corrugation in sharp curves of commuter line

35

Study on Rain Attenuation at Ku and Ka-Band in Malaysia Derived From TRMM Satellite Data

36

Study on Rainrate Conversion Models for 60 Minutes to 1 Minute Integration Times in Malaysia

37

Study on Raman spectra of electrochromic c-WO3 films and their infrared emittance modulation characteristics

38

Study on Raman spectrum intensity depending on temperature with optical-fiber method

39

Study on Random Initiation Phenomenon for Sympathetic Detonation of Explosive

40

Study on range distribution parameters for fluorine ion implantation in KTiOAsO4 crystals at low velocity

41

Study on rapeseed oil as alternative fuel for a single-cylinder diesel engine

42

Study on rapid detection of Vibrio parahaemolyticus with sea food

43

Study on rare earth electrolyte of SDC

44

Study on rare earth electrolyte of SDC-LSGM

45

Study on Rate Dependent Inelastic Creep Behavior of Reinforced Materials

46

Study on reaction kinetics and selective precipitation of Cu, Zn, Ni and Sn with H2S in single-metal and multi-metal systems Original Research Article

47

Study on reaction mechanism of low temperature preparation of nanocrystalline LaCoO3-λ

48

Study on reaction performance and competitive adsorption effect during coker gas oil catalytic cracking

49

Study on reaction-processed Al–Cu/α-Al2O3 (p) composites

50

Study on reaction-processed Al–Cu/α-Al2O3 (p) composites

51

Study on reactive extrusion processes of block copolymer

52

Study on reactive sputtering of titanium in the linear magnetron discharge

53

Study on Reactivity of Circulating Fluidized Bed Combustion Fly Ashes in the Presence of Water

54

Study on reactor building structure using ultrahigh strength materials Original Research Article

55

Study on real-gas equations of high pressure hydrogen

56

Study on real-time wear measurement of piston-ring and cylinder-bore in an engine using thin layer activation method

57

Study on Reasonable Energy Supplement Time of Tight Sandstone Oil Reservoirs with Rock Compressibility Stress Sensitivity

58

Study on recognition and separation of rare earth ions at picometre scale by using efficient ion-surface imprinted polymer materials

59

Study on reconstruction mechanism at the surface of a glassy polymer

60

Study on recovery and refining of TA from alkali reduction wastewater Original Research Article

61

Study on recovery current of transformer type superconducting fault current limiter

62

Study on Recyclability of Graphite Cutting Chips as Conductive Fillers

63

Study on red fermented rice with high concentration of monacolin K and low concentration of citrinin

64

Study on Red Long-Time Luminescent Material Y2O2S:Eu, M (M = Mg, Ca, Sr, Ba)

65

Study on reduction of inorganic membrane fouling by ultraviolet irradiation

66

Study on REEs as tracers for late permian coal measures in Bijie City, Guizhou Province, China

67

Study on refrigerant circuitry of condenser coils with exergy destruction analysis

68

Study on regulating characteristics of magnetic fluid active damper

69

Study on regulation design about energy-saving and emission-reduction based on game theory

70

Study on reinforced lightweight coconut shell concrete beam behavior under flexure

71

Study on reinforced lightweight coconut shell concrete beam behavior under shear

72

Study on relationship between oblique fatigue crack and rail wear in curve track and prevention

73

Study on Relationship between Productivity, Inputs and Environmental Quality in Tannery Effluent Affected Farms of Tamil Nadu

74

Study on relationship between sintering atmosphere and dielectric properties for Bi2O3–ZnO–Ta2O5 system

75

Study on relationship between the concentration of hydrocarbon groups in heavy oils and their structural parameter from 1H NMR spectra☆

76

Study on Relationship between Various Flowering Attributes and Heritability in Neem (Azadirachta indica A. Juss)

77

Study on relationship of luminescence in CaS:Eu,Sm and dopants concentration

78

Study on relationships among deep vein thrombosis, homocysteine related B group vitamins

79

Study on relationships of morphological traits with growth indices in monogerm cultivars of sugar beet

80

Study on relative orbital configuration in satellite formation flying

81

Study on remanent magnetization of Fe-9Cr steel and its effect on in-vessel remote handling for future fusion reactors

82

Study on removal of coloured impurity in soybean oligosaccharides extracted from sweet slurry by adsorption resins Original Research Article

83

Study on removal of Fe3+ from sodium dihydrogen phosphate by emulsification solvent extraction

84

Study on reproduction ecology of endangered species Abies chensiensis

85

Study on requirements of bioequivalence for registration of pharmaceutical products in USA, Europe and Canada

86

Study on requirements of bioequivalence for registration of pharmaceutical products in USA, Europe and Canada

87

Study on Research Anxiety Among Faculty Members of Isfahan University of Medical Sciences

88

Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature

89

Study on residual stresses of thin-walled injection molding

90

Study on resistance coefficient in compound channels

91

Study on resistance welding of glass fiber reinforced thermoplastic composites

92

Study On Resonance Control By Locally Expanding The Outer Tube In A Coaxial Thermoacoustic System

93

Study on resonance-enhanced multiphoton ionization (REMPI) of SO2 in the range 365–405 nm

94

Study on resonant fly-back converter for DC distribution system

95

Study on response function of CdTe detector

96

Study on response function of CdTe detector

97

Study on response surface methodology (RSM) of lipase-catalyzed synthesis of palm-based wax ester

98

Study on retention behavior and chemical states of energetic deuterium implanted into carbon-contained boron film

99

Study on retention factor and resolution of tocopherols by supercritical fluid chromatography

100

Study on Retrofitting of RC Column Using Ferrocement Full and Strip Wrapping

101

Study on reversible addition-fragmentation chain transfer (RAFT) polymerization of MMA in the presence of 2-cyanoprop-2-yl 1-dithiophenanthrenate (CPDPA)

102

Study on reversible hydrogen sorption behaviors of a 3NaBH4/HoF3 composite

103

Study on rheological behaviour of poly(butylene terephthalate)/montmorillonite nanocomposites

104

Study on rheological properties and relaxational behavior of poly(dianilinephosphazene)/low-density polyethylene blends

105

Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid

106

Study on Rheology Properties, Durability and Microstructure of UHPSCC Contains Garnet, Basalt, and Pozzolan

107

Study on rigid-body guidance synthesis of planar linkage

108

Study on ring compression test using physical modelling and FE simulation

109

Study on risk factors (predisposing factors) for poor diabetes control during Hajj (1436/2015) in people with diabetes

110

Study on risk perceptions of international tourists in India

111

Study on Roast Reaction Kinetics and Crystal Behavior of Ceria-Based Rare Earth Polishing Powder

112

Study on Roasting Decomposition of Mixed Rare Earth Concentrate in CaO-NaCl-CaCl2

113

Study on roles of polyacrylonitrile in “salt-in-polymer” and “polymer-in-salt” electrolytes

114

Study on Rooting and Changes of Some Secondary Metabolites of Dog Rose Grown in Lorestan Province

115

Study on Rosellinia necatrix Isolates Causing White Root Rot Disease in Taiwan

116

Study on rotational fretting wear of 7075 aluminum alloy

117

Study on rotational fretting wear of bonded MoS2 solid lubricant coating prepared on medium carbon steel

118

Study on rotational fretting wear under a ball-on-concave contact configuration

119

Study on Rotavirus Infection and Its Genotyping in Children Below 5 Years in South West Iran

120

Study on Ru ware glaze of the Northern Song dynasty: One of the earliest crystalline-phase separated glazes in ancient China

121

Study on S uppression of C ombustion I nstability u sing Q uarter W avelength T ube

122

Study on S2 emission response from sulphones and sulphonic acids in molecular emission cavity analysis

123

Study on S2 emission response from sulphur-containing amino acids in molecular emission cavity analysis

124

Study on safety and bioavailability of ubiquinol (Kaneka QH™) after single and 4-week multiple oral administration to healthy volunteers

125

Study on safety control for Wuhan metro construction in complex environments

126

Study on salinity tolerance and some physiological indicators of ion-osmoregulatory system in juvenile beluga, Huso huso (Linnaeus, 1758) in the south Caspian Sea: Effect of age and size.

127

Study on Salivary Glands a-amylase In Wheat Bug Eurygaster maura (Hemiptera: Scutelleridae)

128

Study on salt spray corrosion of Ni–graphite abradable coating with 80Ni20Al and 96NiCr–4Al as bonding layers

129

Study on sapphire removal for thin-film LEDs fabrication using CMP and dry etching

130

Study on scale inhibition performances and interaction mechanism of modified collagen Original Research Article

131

Study on schwertmannite production from copper heap leach solutions and its efficiency in arsenic removal from acidic sulfate solutions

132

Study on Scientific outputs of Scholars in the Field of Digital Libraries Using Altmetrics Indicators

133

STUDY ON SCINTILLATION CONSIDERING INNER- AND OUTER-SCALES FOR LASER BEAM PROPAGATION ON THE SLANT PATH THROUGH THE ATMOSPHERIC TURBULENCE

134

Study on scouring around bridge piers protected by collar using low density sediment

135

Study on sea ice desalination technology Original Research Article

136

Study on seafood volatile profile characteristics during storage and its potential use for freshness evaluation by headspace solid phase microextraction coupled with gas chromatography–mass spectrometry Original Research Article

137

Study on seawater nanofiltration softening technology for offshore oilfield water and polymer flooding Original Research Article

138

Study on secondary side flow of steam generator with coupled heat transfer from primary to secondary side

139

Study on segmented reflector lamp design based on error analysis

140

Study on seismic behavior of reinforced concrete columns after ECE treatment

141

Study on Seismic Dynamic Response of ShallowBuried Subway Station Structure and Ancillary Facilities

142

Study on Seismic Performance of Exterior Beam- Column Connection with Different Joint Core Details

143

Study on Seismic Performance of Exterior Beam-Column Connection with Different Joint Core Details

144

Study on Seismic Response of Asymmetric Framed and Bundled Tube Resistant Skeletons in Near-Field Zones

145

Study on selective adsorption of deuterium on boron nitride using photon-stimulated ion-desorption

146

Study on self organized criticality of China power grid blackouts

147

Study on self-diffusion in water, alcohols and hydrogen fluoride by the statistical associating fluid theory

148

Study on self-heating metallic powder for the selective laser sintering process

149

Study on self-tuning pole assignment speed control of an ultrasonic motor

150

Study on Semiconductor Properties of Acetylide-Thiourea Fabricated onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology

151

Study on semi-conjugate direction methods for non-symmetric systems

152

Study on semidry/dry wire drawing using DLC coated dies

153

Study on Senna alata and its different extracts by Fourier transform infrared spectroscopy and two-dimensional correlation infrared spectroscopy

154

Study on sensing mechanism of CuO–SnO2 gas sensors

155

Study on sensing properties of tin oxide CO gas sensor with low power consumption

156

Study on sensitized photochemical fluorescence of menadione sodium bisulfite and its application in pharmaceutics analysis

157

Study on separation of heavy rare earth elements by solvent extraction with organophosphorus acids and amine reagents

158

Study on separation of rare earth elements in complex system

159

Study on separation technology of Pr and Nd in D2EHPA-HCl-LA coordination extraction system

160

Study on separative structure of EnFET to detect acetylcholine

161

Study on sequence stratigraphy from benxi to taiyuan formation in Northeastern Ordos Basin

162

Study on serum glucose, insulin, NEFA, BHBA and lipid profile in different productive status of high producing Holstein dairy cows

163

Study on serum homocysteine level in Alzheimer’s disease and its relationship with the stages of this disease

164

STUDY ON SERVICE QUALIY MEASUREMENT IN RETAIL OUTLET MANAGEMENT SYSTEMS IN INDIA

165

Study on settlement of unprotected railway embankment in permafrost

166

Study on sex steroid-binding proteins (with emphasize on 17(beta)-estradiol) in plasma of female and juvenile kutum (Rutilus frisii kutum).

167

Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell

168

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

169

Study on Shear Strengthening of RC Continuous Beams with Different CFRP Wrapping Schemes

170

Study on shell–solid coupling FE analysis for fatigue assessment of ship structure

171

STUDY ON SHIELDING EFFECTIVENESS OF METALLIC CAVITIES WITH APERTURES BY COMBINING PARALLEL FDTD METHOD WITH WINDOWING TECHNIQUE

172

Study on shock wave-vortex ring interaction by the micro vortex generator controlled ramp flow with turbulent inflow

173

Study on shrub community diversity of Ordos Plateau, Inner Mongolia, Northern China

174

Study on Side-Jet Injection Near a Duct Entry With Various Injection Angles

175

Study on Side-Jet Injection Near a Duct Entry With Various Injection Angles

176

Study on silica fume modified mortar with various Indian cements cured at different temperatures

177

Study on silica supported Cusingle bondCrsingle bondMo nitrobenzene hydrogenation catalysts Original Research Article

178

Study on silicon-slicing technique using plasma-etching processing

179

Study on silk anti-crease finishing with polycarboxyl-terminated trichlorotriazine derivatives by surface analysis methods

180

Study on Simplified Model for Estimating Evaporation from Reservoirs

181

Study on simulation models of tomato fruit quality related to cultivation environmental factors

182

Study on Simultaneous Catalytic Reduction of Sulfur Dioxide and Nitric Oxide on Rare Earth Mixed Compounds

183

Study on simultaneous speciation of arsenic and antimony by HPLC–ICP-MS

184

Study on single crystals of butyl branched polyethylene in the presence of electric field

185

Study on single layer flow insulation utilizing NiCr open-cellular porous plate

186

Study on single-bond interaction between amino-terminated organosilane self-assembled monolayers by atomic force microscopy

187

Study on single-cell contact model of thick-walled cellular solid

188

Study on single-cell contact model of thick-walled cellular solid

189

Study on single-stage hydrocracking of vacuum residue in the suspension of Ni–Mo catalyst Original Research Article

190

Study on sintering kinetics and activation energy of UO2 pellets using three different methods

191

Study on slag composition and flow property in a bench-scale OMB gasifier

192

Study on Sm1.8Ce0.2CuO4–Ce0.9Gd0.1O1.95 composite cathode materials for intermediate temperature solid oxide fuel cell

193

Study on small signal stability of microgrids: A review and a new approach

194

Study on SnO2/Al/SiO2/Si ISFET with a metal light shield

195

Study on SO42−/ZrO2-MoO3 in the integrative transformation of cottonseed oil deodorizing distillate

196

Study on Social Capital in Female Students of Arak University of Medical Sciences, Central Iran

197

Study on solar radiation and energy efficiency of building glass system

198

Study on solar sources and polar cap absorption events recorded in Antarctica Original Research Article

199

Study on solar/waste heat driven multi-bed adsorption chiller with mass recovery

200

Study on solid lubricant properties of carbon onions produced by heat treatment of diamond clusters or particles

201

Study on solid solubility of Gd in UO2 using X-ray diffraction

202

Study on solid solution and aging process of AZ91D magnesium alloy with cerium

203

Study on solid–liquid phase equilibria in ionic liquid: 1. The solubility of alkali chloride (MCl) in ionic liquid EMISE

204

Study on solid–liquid phase equilibria in ionic liquid: 2. The solubility of alkali bromide in ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate

205

Study on solid-phase reactions in Ti/p+-Si1−x−yGexCy/Si(100) contacts

206

Study on solid-phase welding of duplex stainless steel with carbon steel based on superplasticity and consideration of the cyclic fatigue fracture behavior

207

Study on solid-state chemistry of the ZnO/Fe3O4/H2O system for H2 production at 973–1073 K

208

Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers

209

Study on solution models and methods for the fuzzy assignment problems

210

Study on Solvent Extraction of Mercury Complex With DB18C6

211

Study on solvent extraction of propionic acid from simulated discharged water in vitamin B12 production by anaerobic fermentation

212

Study on solvent permeation resistance properties of nylon6/clay nanocomposite

213

Study on solvent-loading effect on inductively coupled plasma and microwave-induced plasma sources with a microliter nebulizer Original Research Article

214

STUDY ON SOME AGROCHEMICAL POLLUTANTS IN DRAINS WATER AT NORTH DELTA, EGYPT

215

Study on some aspects of seed viability and vigor

216

STUDY ON SOME BIOLOGICAL AND CHEMICAL POLLUTANTS IN DRAINS WATER AT Kafr El-Shiekh DISTRICT

217

Study on Some Chemical Compounds on the Vase Life of Two Cultivars of Cut Roses

218

Study on Some Effective Factors for Successful Non-Surgical Reduction in Intussusception among Children

219

Study on some factors affecting survivability of airborne fungi Original Research Article

220

Study on some factors affecting the results in the use of MIP method in concrete research

221

STUDY ON SOME FACTORS ASSOCIATED WITH ECZEMA IN RAMADI.

222

Study on Some Integral Inequalities for Pseudo-Integrals

223

STUDY ON SOME MODERN IRRIGATION SYSTEM COMPONENTS MANUFACTURING IN EGYPT

224

Study on some morphological characteristics of sugar beet varieties under drought stress in greenhouse

225

Study on Some of Pistachio Cultivars’ Contamination of Khorasan-e-Razavi Province to Aspergillus flavus

226

Study on some physical properties of new oxyfluorovanadate glasses

227

Study on some predelivery immunoparameters in pregnant women in Al-Ramadi city

228

Study on some properties of acid-soluble collagens isolated from fish skin and bones of rainbow trout (Onchorhynchus mykiss)

229

Study on some qualitative properties for solutions of a certain two-dimensional fractional differential system with Hadamard derivative

230

Study on sonodynamic activity of metallophthalocyanine sonosensitizers based on the sonochemiluminescence of MCLA

231

Study on sonodynamic activity of metallophthalocyanine sonosensitizers based on the sonochemiluminescence of MCLA

232

Study on soot formation characteristics in the diesel combustion process based on an improved detailed soot model

233

Study on sorption of D155 resin for gadolinium

234

Study on sound propagation in long enclosures with a vertical or inclined branch of different dimensions

235

Study on sound transmission characteristics of a cylindrical shell using analytical and experimental models

236

Study on spark assisted compression ignition (SACI) combustion with positive valve overlap at medium–high load

237

Study on spatial dispersion theory of excess conduction loss in normal metals surface below terahertz frequencies

238

Study on speciation of aluminum in human serum using zwitterionic bile acid derivative dynamically coated C18 column HPLC separation with UV and on-line ICP-MS detection

239

Study on specific enthalpy of ice including solute in aqueous solution

240

Study on spectral characterization of infrared flare material combustion with remote high resolution Fourier transform infrared spectrometry

241

Study on spectroscopic characterization of Cu porphyrin/Co porphyrin and their interactions with ctDNA

242

Study on spectroscopic characterization of meso-tetrakis (4-hydroxyphenyl) porphyrin (THPP) in β-cyclodextrin and its derivatives

243

Study on spectroscopic characterization of Pd porphyrin and its interaction with ctDNA

244

Study on spectroscopic properties of GdOBr:RE3+ (RE=Eu, Tb, Ce)

245

Study on spent fuel rejuvenation in PROMETHEUS fusion reactor

246

Study on Sperm DNA Integrity Detection Using an Image Processing Approach

247

Study on spin dependent tunneling and Coulomb blockade in granular systems with restricted tunneling paths

248

Study on spin polarization of non-magnetic atom in diluted magnetic semiconductor: The case of Al-doped 4H–SiC

249

Study on spray patterns of gas-centered swirl coaxial (GCSC) injectors in high pressure conditions

250

Study on stability and electrical performance of yttrium and bismuth co-doped BaCeO3

251

Study on stability and energy consumption in typical car-following models

252

Study on stability mechanism of immobilized pH gradient in isoelectric focusing via the Svensson–Tiselius differential equation and moving reaction boundary

253

Study on Stability of Iodine in Iodated Salt by Use of Different Cooking Model Conditions

254

Study on Stability of Iodine in Iodated Salt by Use of Different Cooking Model Conditions

255

Study on stability of RECo5 phases (RE=Dy, Gd)

256

Study on stability of self-breathing DFMC with EIS method and three-electrode system

257

Study on Stability of Surface Mine Slope Influenced by Underground Mining below the Endwall Slope

258

Study on stainless steel 316L coatings sprayed by a novel high pressure HVOF

259

Study on starch-graft-acrylamide/mineral powder superabsorbent composite

260

Study on start-up characteristics of loop heat pipe under low-power

261

Study on static and dynamic characteristics of moving magnet linear compressors Original Research Article

262

Study on Static Recrystallization Process in Duplex Stainless Steel 2205

263

Study on steady-state response of a vertical axis automatic washing machine with a hydraulic balancer using a new approach and a method for getting a smaller deflection angle

264

Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets

265

Study on steam-carrying effect in static flash evaporation

266

Study on steel furnace slags with high MgO as additive in Portland cement

267

Study on Steel-Mushy A1-20Sn Alloy Bonding

268

Study on stepped type basin in a solar still

269

Study on step-up characteristic of hydraulic control rod driving system Original Research Article

270

Study on steric transition in asymmetrical flow field-flow fractionation and application to characterization of high-energy material

271

Study on Strata Behavior Law and Support Adaptability in Fault Island Pillar Light Caving Face

272

Study on Streamlined Process Improvement by Us ing Value Stream Mapping in Automotive Seating Company: A Case Study

273

Study on strength and corrosion performance for steel embedded in metakaolin blended concrete/mortar

274

Study on strength of thick reinforced concrete slab with opening Original Research Article

275

Study on stress distribution of a subsea Ram BOP body based on simulation and experiment

276

Study on stress relaxation behavior of silicon carbide by BSR method

277

Study on stress wave propagation in fractured rocks with fractal joint surfaces

278

Study on stretch extinction limits of CH4/CO2 versus high temperature O2/CO2 counterflow non-premixed flames

279

Study on strongly polarized water in AOT reversed micelles by fluorescence probes and analytical application of AOT reversed micelles

280

Study on structural and electrical properties of layered perovskite-type oxide-ion conductor

281

Study on Structural and Optical Properties of Wurtzite Cu2ZnSnS4 Nanocrystals Synthesized via Solvothermal Method

282

Study on structural changes of microwave heat-moisture treated resistant Canna edulis Ker starch during digestion in vitro

283

Study on structural evolution of nanostructured 3 mol% yttria stabilized zirconia coatings during low temperature ageing

284

Study on structural evolution of perfluorosulfonic ionomer from concentrated DMF-based solution to membranes

285

Study on structural optimum design of implantable drug delivery micro-system

286

Study on structural phase transitions and relaxation processes of Cs2Co(SO4)2·6H2O and Cs2Zn(SO4)2·6H2O crystals

287

Study on structural properties and solution dynamics of zinc complexes with the (N,N-dimethylaminomethyl)ferrocenyl ligand

288

Study on structural variation of oxalate-oxodiperoxovanadate(V) from solid state to solution using NMR spectroscopy and theoretical calculation

289

Study on structural, luminescence properties and Hall Effect of SnO2 nanoparticles obtained by a Co-precipitation technique

290

Study on structural, morphological and electrical properties of sputtered titanium nitride films under different argon gas flow

291

Study on structure and electrochemical performance of melt-spun non-stoichiometry alloys Ml(NiCoMnTi)5+X

292

Study on structure and electrochemical properties of the (LaGdMg)Ni3.35-xCoxAl0.15 (x=0-2.0) hydrogen storage alloys

293

Study on structure and performance of polycarbonate urethane synthesized via different copolymerization methods

294

Study on structure and pyrolysis behavior of lignin derived from corncob acid hydrolysis residue

295

Study on structure and pyrolysis behavior of lignin derived from corncob acid hydrolysis residue

296

Study on structure and thermal stability properties of cellulose fibers from rice straw

297

Study on structure change of carbon nanotubes depending on different reaction gases

298

Study on structure of AlGaN on AlN interlayer by synchrotron radiation XRD and RBS

299

Study on structure of few sulphur containing 1,4-naphthoquinone derivatives

300

Study on structure, sensitivity and mechanical properties of HMX and HMX-based PBXs with molecular dynamics simulation

301

Study on Structure-property Relationships of Polypropylene/OMMT Nanocomposites with Different Morphologies

302

Study on structures and electron field emission of nitrogenated carbon nanotips grown by plasma-enhanced hot filament chemical vapor deposition Original Research Article

303

Study on structures and photoluminescence of nitrogenated carbon nanotip arrays synthesized by plasma assisted hot filament chemical vapor deposition

304

Study on Students’ Communication and Interaction in Collaborative Learning Processes with Web-based Social Tools

305

Study on styrene-assisted melt free-radical grafting of maleic anhydride onto polypropylene

306

Study on Subclinical and Clinical Marek’s Disease (MD) in the Broiler Chickens Using Histopathology

307

Study on sub-cycling algorithm for flexible multi-body system: stability analysis and numerical examples

308

Study on sub-cycling algorithm for flexible multi-body system—integral theory and implementation flow chart

309

Study on successively preparation of nano-TiO2 ethanol colloids by pulsed laser ablation and fluorescence property

310

Study on sugar profile of rice during ageing by capillary electrophoresis with electrochemical detection

311

Study on Sulfation of CeO2/γ-Al2O3 Sorbent in Simulated Flue Gas

312

Study on sulphidization roasting and flotation of cervantite

313

Study on sulphonated polysulphone/polyurethane blend membranes for fuel cell applications

314

Study on Sunitinib Adsorption on Graphene Surface as an Anticancer Drug

315

Study on superabsorbent composite XVI. Synthesis, characterization and swelling behaviors of poly(sodium acrylate)/vermiculite superabsorbent composites

316

Study on superabsorbent composite. III. Swelling behaviors of polyacrylamide/attapulgite composite based on acidified attapulgite and organo-attapulgite

317

Study on superabsorbent composite. IV. Effects of organification degree of attapulgite on swelling behaviors of polyacrylamide/organo-attapulgite composites

318

Study on superabsorbent composite. VI. Preparation, characterization and swelling behaviors of starch phosphate-graft-acrylamide/attapulgite superabsorbent composite

319

Study on supercapacitance performance of TiO2 nanotube arrays modified by non-metal doping and Polyaniline electrodeposition methods

320

Study on supercritical extraction of lipids and enrichment of DHA from oil-rich microalgae

321

Study on supercritical hydrothermal synthesis of CoFe2O4 nanoparticles

322

Study on super-finishing by CBN stone (estimation of cutting performance using average crossing angle)

323

Study on superplastic blow-forming in a rectangular closed-die

324

Study on Supply Chains of Goats in Northern Kerala

325

Study on supramolecular complexing ability vis-à-vis estimation of pKa of substituted sulfonamides: Dominating role of Balaban index (J)

326

Study on supramolecular structural changes of ultrasonic treated potato starch granules

327

Study on surface asperity flattening during uniaxial planar compression

328

Study on surface chemistry and particle size of porous silicon prepared by electrochemical etching

329

Study on surface damages caused by turning NiCr20TiAl nickel-based alloy

330

Study on surface film in the wear of electrographite brushes against copper commutators for variable current and humidity

331

Study on surface modification of porous apatite-wollastonite bioactive glass ceramic scaffold

332

Study on surface modification of ultrafine inorganic antibacterial particles

333

Study on surface morphology and physicochemical properties of raw and activated South African coal and coal fly ash

334

Study on surface properties of gilt-bronze artifacts, after Nd:YAG laser cleaning

335

Study on surface states of Pt/TiO2 thin film in different atmospheres

336

Study on surgical approaches and electrode implantation of oculomotor nerve and inferior obliquus in beagle dogs

337

Study on surgical treatment of intractable childhood epilepsy

338

Study on sustainability reports of healthcare sector in India: Evidence from five leading Indian pharmaceutical companies

339

Study on sustainable development of rural household energy in northern China

340

Study on sustainable landscape design of abandoned quarries: An example: Zhushan ecological park in Xuzhou

341

Study on sustainable redevelopment of a densely built-up area in Tokyo by introducing a distributed local energy supply system

342

STUDY ON SWARMING AND COLONY STRUCTURE OF HARVESTER TERMITE, Anacanthotermes ochraceus (BURM)

343

Study on Switched Reluctance Generator for Rural Electrification

344

Study on synergistic carriers facilitated transport of uranium(VI) and europium(III) across supported liquid membrane from phosphoric acid media

345

Study on syntheses and magnetic properties of novel bithiazole-containing polymeric complexes

346

Study on synthesis and anticorrosion properties of polymer nanocomposites based on super paramagnetic Fe2O3·NiO nanoparticle and polyaniline

347

Study on synthesis and biological activity of a galactosylated piperazinyl porphyrin

348

Study on synthesis and characterization of novel polyimides derived from 2,6-Bis(3-aminobenzoyl) pyridine

349

Study on Synthesis and Characterization of Unsaturated Poly (ester-amide) as Bone Fixation Materials

350

Study on Synthesis and Dispersion Characteristics of MWNTslPBO Composites Prepared by In-situ Polymerization.

351

Study on synthesis and physical properties of charged surface modifying macromolecules with different end-capping materials for membrane applications

352

Study on synthesis and properties of hydroxyapatite nanorods and its complex containing biopolymer

353

Study on synthesis and properties of modified starch binder for foundry

354

Study on synthesis and properties of poly(ferrocenylnbutylmethylsilane) with unsymmetrical silicon substitution groups

355

Study on synthesis method of λ-formed 4-bar linkages approximating a straight line

356

Study on synthesis of a hydrophilic bead carrier containing epoxy groups and its properties for glucoamylase immobilization

357

Study on Synthesis of Doped Polyaniline with Alumina and its Anticorrosion Properties as an Additive in Paint Coating

358

Study on synthesis of low surface area activated carbons using multi-step activation for use in electric double layer capacitor

359

Study on synthesis of poly(GMA)-grafted Fe3O4/SiOX magnetic nanoparticles using atom transfer radical polymerization and their application for lipase immobilization

360

Study on synthesis of Pr1−xCaxCrO3 and their electrical properties

361

Study on Synthesis of TPA-Silicalite-1 from Initially Clear Solutions of Various Base Concentrations by in Situ Calorimetry, Potentiometry, and SAXS

362

Study on synthesis of two-armed polymers containing a crown ether core and their self-assembly behaviors in selective solvents

363

Study on synthesis of ultrafine Cu–Ag core–shell powders with high electrical conductivity

364

Study on synthesis, characterization and biological activity of some new nitrogen heterocycle porphyrins Original Research Article

365

Study on synthesis, crystal structure, antioxidant and DNA-binding of mono-, di- and poly-nuclear lanthanides complexes with bis(N-salicylidene)-3-oxapentane-1,5-diamine

366

Study on Synthesis, Structure and Properties of Ba0.9 Sr0.1 TiO3: x Eu2 O3 Ceramics

367

Study on synthesis, structure, and DNA-binding of lanthanide complexes with 2-carboxylbenzaldehyde thiosemicarbazone

368

Study on synthetic system for conducted EMI noise analysis and suppression+

369

Study on system dynamics of evolutionary mix-game models

370

STUDY ON SYSTEM IDENTIFICATION OF LINEAR AND NON-LINEAR LIQUID CHROMATOGRAPHY SEPARATION

371

Study on systematizing the synthesis of the a-series ganglioside glycans GT1a, GD1a, and GM1 using the newly developed N-Troc-protected GM3 and GalN intermediates Original Research Article

372

Study on Tablet conversion by pressure-less sintering method on the thermoluminescent dosimetric response of Beta Tricalcium Phosphate

373

Study on target structure for direct–indirect hybrid implosion mode in heavy ion inertial fusion

374

Study on target structure for direct–indirect hybrid implosion mode in heavy ion inertial fusion

375

STUDY ON TAXONOMY OF PHYTOPHAGOUS BUGS OF THE FAMILY MIRIDAE AND INTRODUCING INSECTS NATURAL ENEMIES OF THE ALFALFA TARNISHED PLANT BUG IN HAMEDAN ALFALFA FARMS (WEST OF IRAN)

376

Study on TDS removal from polymer-flooding wastewater in crude oil: extraction by electrodialysis Original Research Article

377

Study on technology of ultrasonic vibration aided electrical discharge machining in gas

378

Study on temperature dependence of catalytic thermal decomposition of polyamides and polyurethanes mixed with acidic zeolites

379

Study on temperature dependence of catalytic thermal decomposition of polyamides and polyurethanes mixed with acidic zeolites

380

Study on temperature stability improvement of on-chip reference elements using integrated Peltier coolers

381

Study on tempering behaviour of AISI 410 stainless steel

382

Study on template removal from silicalite-1 giant crystals

383

Study on TEMPO-mediated selective oxidation of hyaluronan and the effects of salt on the reaction kinetics Original Research Article

384

Study on temporal variation in citrus canopy using thermal imaging for citrus fruit detection

385

Study on tensile properties and microstructure of cast AZ91D/AlN nanocomposites

386

Study on terminal effects of dense fragment cluster impact on armor plate. Part I: analytical model

387

Study on terminal effects of dense fragment cluster impact on armor plate. Part II: numerical simulations

388

STUDY ON TERPHENYL ISOMERS BY SECOND-DERIVATIVE SOLID-SUBSTRATE ROOM TEMPERATURE PHOSPHORESCENCE

389

Study on texture evolution and properties of silver thin films prepared by sputtering deposition

390

Study on thaw consolidation of permafrost under roadway embankment

391

Study on the DAMAGING OF DYED COTTON FIBERS WITH DIRECT DYE IN SPINNING PROCESSES AND ITS EFFECT ON THE PROPERTIES OF COTTON MELANGE YARN

392

Study on the (R)-oxynitrilase activity of Pouteria sapota

393

Study on the [1 + 1′] photodissociation spectra of via transitions

394

Study on the 1,3-dipolar cycloaddition reaction of 4-ethoxy-1,1,1-trifluoro-3-buten-2-one with nitrile oxides

395

Study on the 21Na(p,γ)22Mg stellar reaction by the (p,t) reaction Original Research Article

396

Study on the 2-axis NC machining of a toroid-shaped cutter with a constant angle between the cutting edge and the cutter axis

397

Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy

398

Study on the absolute configuration of (−)-palau’amine

399

Study on the absorption characteristics and birefringence of Ce-doped SBN

400

Study on the absorption spectra and electronic structures of the CsI crystal with cesium vacancy

401

Study on the Academic Value of theManuscript Fenmensuosuilu

402

Study on the accuracy of milk amyloid A test and other diagnostic methods for identification of milk quality

403

Study on the Accuracy of RANS Modelling of the Turbulent Flow Developed in a Kaplan Turbine Operated at BEP. Part 1 - Velocity Field

404

Study on the Accuracy of RANS Modelling of the Turbulent Flow Developed in a Kaplan Turbine Operated at BEP. Part 2 - Pressure Fluctuations

405

Study on the accuracy of the elution by characteristic point method for the determination of single component isotherms

406

Study on the acidification and pollution of precipitation based on a data set collected on a 0.5-mm precipitation basis

407

Study on the action effect of pavement straw composite fiber material in asphalt mixture

408

Study on the activation of phospholipases A2 by purinergic agonists in rat submandibular ductal cells

409

Study on the active screen plasma nitriding and its nitriding mechanism

410

Study on the activity coefficients and the solubilities of amino acids in water by the perturbation theory

411

Study on the activity of non-purine xanthine oxidase inhibitor by 3D-QSAR modeling and molecular docking

412

Study on the adhesion behavior of wheel/rail under oil, water and sanding conditions

413

Study on the adhesion mechanism of electrodeposited nickel clusters on carbon substrates

414

Study on the adsorption behavior of γ-GPS on low carbon steel surfaces using RA-IR, EIS and AFM

415

Study on the adsorption isosteres of the composite adsorbent CaCl2 and expanded graphite

416

Study on the adsorption isotherms of chromium (VI) by means of carbon nano tubes from aqueous solutionsStudy on the adsorption isotherms of chromium (VI) by means of carbon nano tubes from aqueous sol

417

Study on the adsorption of fluorescein on Ag(1 1 0) substrate

418

Study on the adsorption of lanthanum(III) from aqueous solution by bamboo charcoal

419

Study on the adsorption of poly(o-ethoxyaniline) nanostructured films using atomic force microscopy

420

Study on the Adsorption of Samarium and Gadolinium Ions by a Biopolymer Microcapsules Containing DEHPA/TOPO Extract

421

Study on the adsorption performance of composite adsorbent of CaCl2 and expanded graphite with ammonia as adsorbate

422

Study on the adsorptive stripping voltammetric determination of trace cerium at a carbon paste electrode modified in situ with cetyltrimethylammonium bromide

423

Study on the AE characteristics of fracture process of mortar, concrete and steel-fiber-reinforced concrete beams

424

Study on the Aerodynamic Performance of Novel Bypass Shock Induced Thrust Vector Nozzle

425

Study on the aerosol optical properties and their relationship with aerosol chemical compositions over three regional background stations in China

426

Study on the aerosol transmission of Hantaan virus

427

Study on the affective property of music

428

Study on the aggregation and electrochemical properties of Rose Bengal in aqueous solution of cyclodextrins

429

Study on the aggregation of coal liquefied preasphaltene in organic solvents by UV–vis and fluorescence spectrophotometry

430

Study on the aggregation of teicoplanin

431

Study on the Al2O3–SiO2–La2O3 ternary system at 1300°C

432

Study on the algal dynamic model for West Lake, Hangzhou

433

Study on the algal dynamic model for West Lake, Hangzhou

434

Study on the alkylation of benzene and 1-dodecene

435

Study on the alkylation of benzene with propylene over Hβ zeolite Original Research Article

436

Study on the alteration of chemical composition and structural parameters of modified montmorillonite

437

Study on the aluminophosphate glass-rich cement

438

Study on the aluminum alloy burnishing processing and the existence of the outstripping phenomenon

439

Study on the ammonia-catalyzed hydrolysis kinetics of single phenyltriethoxysilane and mixed phenyltriethoxysilane/tetraethoxysilane systems by liquid-state 29Si NMR

440

Study on the amorphous poly alpha olefin (APAO) modified asphalt binders

441

Study on the amorphous Ta2O5 thin film capacitors deposited by dc magnetron reactive sputtering for multichip module applications

442

Study on the amorphous Ta2O5 thin film capacitors deposited by dc magnetron reactive sputtering for multichip module applications

443

Study on the amorphous tungsten trioxide ion-sensitive field effect transistor

444

Study on the analogy feedback active soft edge noise barrier

445

Study on the Analytical Behaviour of Concrete Structure Against Local Impact of Hard Missile

446

Study on the annealing effects of proton-implanted rutile

447

Study on the anode behavior of Sn and Sn–Cu alloy thin-film electrodes

448

Study on the anodizing of AZ31 magnesium alloys in alkaline borate solutions

449

Study on the antibiotic activity of microcapsule curcumin against foodborne pathogens

450

Study on the antiendotoxin action of Pulsatillae Decoction using an Affymetrix rat genome array

451

Study on the antioxidant activity and in vitro antifungal activity of Verbascum speciosum methanolic extract

452

Study on the Antiseizure Activities of Inner Bark of Guettarda Speciosa (L.)

453

Study on the antithrombotic activity of Umbilicaria esculenta polysaccharide

454

Study on the applicability of polytetrafluoroethylene–silver composite thin films as sensor material

455

Study on the Application of Cucurbit[6]uril as a Nanoporous Adsorbent for the Removal of 2,4-Dinitrophenol from Wastewaters

456

Study on the application of DME/diesel blends in a diesel engine

457

Study on the application of reduced graphene oxide and multiwall carbon nanotubes hybrid materials for simultaneous determination of catechol, hydroquinone, p-cresol and nitrite Original Research Article

458

Study on the application of reduced graphene oxide and multiwall carbon nanotubes hybrid materials for simultaneous determination of catechol, hydroquinone, p-cresol and nitrite Original Research Article

459

Study on the Application of Sustainable Construction in the Development of the Likupang Special Economic Zone

460

Study on the application possibilities of an atmospheric pressure glow discharge with liquid electrolyte cathode for the modification of polymer materials

461

Study on the applications of SiC thin films to MEMS techniques through a fabrication process of cantilevers

462

Study on the aqueous two-phase systems composed of surfactant, ionic liquid and water

463

Study on the Architecture of Taj Mahal

464

Study on the ash fusion temperatures of coal and sewage sludge mixtures

465

Study on the assembling reaction of graphite oxide nanosheets and polycations Original Research Article

466

Study on the association between residential exposure to N, N-dimethylformamide and hospitalization for respiratory disease

467

Study on the Awareness of the Students of Azad University of Medical Sciences About Nutrition and Food Storing Stuff During Crisis

468

Study on the axial compression buckling behaviors of concentric multi-walled cylindrical shells filled with soft materials

469

STUDY ON THE BEHAVIOR OF ARTIFICIALLY INSEMINATED QUEENS OF APIS M. CARPATICA RACE DURING PASSIVE PERIOD

470

Study on the behavior of medium carbon vanadium microalloyed steel by hot compression test

471

Study on the behavior of nanofiltration membranes using for chromium(III) recovery from salt mixture solution Original Research Article

472

Study on the Behavior of Solar Array Deployment with Root Hinge Drive Assembly

473

Study on the behavior of the heavy metals Cu, Cr, Ni, Zn, Fe, Mn and 137Cs in an estuarine ecosystem using Mytilus galloprovincialis as a bioindicator species: the case of Thermaikos gulf, Greece

474

Study on the behavior of Zn–Fe alloy electroplating

475

Study on the behaviour of glucose oxidase immobilized on microfiltration polyamide membrane

476

Study on the behaviour of ZnCoCu alloy electroplating

477

Study on the binary intermetallic compounds in the Mg–Ce system

478

Study on the binary mixtures of alkyls alfa, omega-dihalogenated (chlorine, bromine, iodine) with n-alkanes. An improvement by considering the variation of the interaction parameter with the chain length

479

Study on the binding behavior of bovine serum albumin with cephalosporin analogues by chemiluminescence method

480

Study on the binding equilibrium between surfactant FC95 and DNA by resonance light-scattering technique

481

Study on the binding of 2,3-diazabicyclo[2.2.2]oct-2-ene with bovine serum albumin by fluorescence spectroscopy

482

Study on the binding of colloidal zinc oxide nanoparticles with bovine serum albumin

483

Study on the binding of farrerol to human serum albumin

484

Study on the Biochemical Effect of Date Palm Pollen on Mice Exposed to Incense Smoke

485

Study on the biodegradability and biocompatibility of WE magnesium alloys

486

Study on the biosynthesis of the notoamides: pinacol-type rearrangement of the isoprenyl unit in deoxybrevianamide E and 6-hydroxydeoxybrevianamide E

487

Study on the black electrolytic coloring of anodized aluminum in cupric sulfate

488

Study on the blood compatibility and biodegradation properties of magnesium alloys

489

Study on the bonding state for carbon–boron nitrogen with different ball milling time

490

Study on the bonding strength between calcium phosphate/chitosan composite coatings and a Mg alloy substrate

491

Study on the breaking behavior of self-bursting microcapsules

492

Study on the brill transition and melt crystallization of nylon 65: A polymer able to adopt a structure with two hydrogen-bonding directions

493

Study on the bubble motion control by ultrasonic wave

494

Study on the bubbly lubrication of journal bearings at various shear rates and temperatures

495

Study on the build of channels in accurate separation membrane and its selective mechanism

496

Study on the bulging deformation of the porous metal in upsetting

497

Study on the buoyancy and surface tension convection of high-temperature oxide solution

498

Study on the calibration coefficients of a quasi-dimensional model for HCNG engine

499

Study on the carbon dioxide hydrogenation to iso-alkanes over Fe–Zn–M/zeolite composite catalysts

500

Study on the carbonization process in the fabrication of pebble fuel elements

501

Study on the catalytic reaction mechanism of low temperature oxidation of CO over Pd–Cu–Clx/Al2O3 catalyst

502

Study on the cause of pop-out defects on the concrete wall and repair method

503

Study on the cavitation erosion behavior of hardfacing alloys for nuclear power industry

504

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

505

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

506

Study on the Ce substitution effects of BiFeO3 films prepared by a sol–gel process

507

Study on the Cestode Postgangesia inarmata from the Silurid Fish Silurus glanis from Kurdistan Region, Iraq

508

Study on the changes of Carbonic Anhydrase activity in insulin resistance and the effect of methylglyoxal

509

Study on the changes of urinary 8-hydroxydeoxyguanosine levels and burden of heavy metal around e-waste dismantling site Original Research Article

510

Study on the chaos anti-control technology in nonlinear vibration isolation system

511

Study on the characteristic points of boiling curve by using wavelet analysis and genetic neural network Original Research Article

512

Study on the characteristics and activity of Ni–Cu–Zn ferrite for decomposition of CO2

513

Study on the characteristics of electrical discharge machining using dielectric with surfactant

514

Study on the characteristics of ferroelectric electron emission

515

Study on the characteristics of metal–organic interface for organic thin-film transistors

516

Study on the characteristics of Ni–W–P composite coatings containing nano-SiO2 and nano-CeO2 particles

517

Study on the characteristics of the sodium heat pipe in passive residual heat removal system of molten salt reactor

518

Study on the characteristics of the supersonic steam injector

519

Study on the Characteristics of Traction Forces Difference Asymmetric Steering Bogies

520

Study on the chemical modification of epoxy/anhydride thermosets using a hydroxyl terminated hyperbranched polymer

521

Study on the chemical stability of the anion exchange membrane of grafting dimethylaminoethyl methacrylate

522

Study on the chemiluminescence resonance energy transfer between luminol and fluorescent dyes using a linear CCD spectrometer

523

Study on the chiral recognition of the enantiomers of ephedrine derivatives with neutral and sulfated heptakis(2,3-O-diacetyl)-β-cyclodextrins using capillary electrophoresis, UV, nuclear magnetic resonance spectroscopy and mass spectrometry

524

Study on the chiral separation of basic drugs by capillary zone electrophoresis using β-CD and derivatized β-CDs as chiral selectors

525

Study on the chromatographic behavior of water-soluble vitamins on p-tert-butyl-calix[8]arene-bonded silica gel stationary phase by HPLC

526

Study on the Classroom Methodology of Secondary School Teachers Trained Through Distance Education

527

Study on the cleaning of new ultrafiltration spiral-woundmodules to prevent membrane fouling (including biological fouling) Original Research Article

528

Study on the ClO4 doped PEDOT-PEG in organic solvent using a hole injection layer for PLEDs

529

Study on the coalescence mechanism of splitting failure of crack-weakened rock subjected to compressive loads

530

Study on the coherent spin motion of the radical-ion pair formed in the laser photolysis of N,N,N′,N′-tetramethyl-1,4-phenylenediamine in 2-propanol Original Research Article

531

Study on the cold working process for FM steel cladding tubes

532

Study on the Collaborative and Interactive Development of the Primary Industry and the Tertiary Industry: Empirical Analysis of the Example of Dujiangyan City

533

Study on the collaborative design process over the Internet: a case study on VRML 2.0 specification design

534

Study on the co-luminescence effect of Tb–Gd–epinephrine system and its application to the sensitive determination of epinephrine at nanomol level

535

Study on the co-luminescence effect of terbium–gadolinium–nucleic acids–cetylpyridine bromide system

536

Study on the combination of self-assembled electrochemical active films of hemoglobin and multilayered fibers

537

Study on the Compaction Effect Factors of Lime-treated Loess Highway Embankments

538

Study on the competition between density waves, singlet, and triplet pairing superconductivity in organic conductors (TMTSF)2X Original Research Article

539

Study on the competitive reaction between bovine serum albumin and neomycin with ponceau S as fluorescence probe

540

Study on the complexation of isoquercitrin with β-cyclodextrin and its derivatives by spectroscopy Original Research Article

541

Study on the composition and hydration of alinite and calcium chloroaluminate minerals

542

Study on the composition and phase change of BaO/Hf/Mo under high temperature Original Research Article

543

Study on the composition of mineral scales in oil wells

544

Study on the compositional differences between transgenic and non-transgenic papaya (Carica papaya L.)

545

Study on the compositional differences between transgenic and non-transgenic papaya (Carica papaya L.)

546

Study on the compositional differences of Tang Sancai from different kilns by INAA

547

Study on the compounds containing 19F and 10B atoms in a single molecule for the application to MRI and BNCT Original Research Article

548

Study on the concentration and seasonal variation of inorganic elements in 35 species of marine algae

549

Study on the concentration effects in size exclusion chromatography: VII. A quantitative verification for the model theory of concentration and molecular mass dependences of hydrodynamic volumes for polydisperse polymers

550

Study on the Configuration Space Based Algorithmic Path Planning of Industrial Robots in an Unstructured Congested Three-Dimensional Space: An Approach Using Visibility Map

551

Study on the conjugation mechanism of colistin sulfate with bovine serum albumin and effect of the metal ions on the reaction

552

Study on the Connection of the Parking lots to Smart Grid Regarding Upgrade Synchronous Generator Performance

553

Study on the construction and performance of a Hg(II)-sensing system having an “off–on” probe derived from rhodamine and an up-conversion excitation core

554

Study on the contamination of Abadan public parks soil with Toxocara spp. eggs

555

Study on the Contrast between Two Seismic Response Analysis Programs of Soil Layer

556

Study on the contribution of cryosphere to runoff in the cold alpine basin: A case study of Hulugou River Basin in the Qilian Mountains

557

Study on the control of pore sizes of membranes using chemical methods Part II. Optimization factors for preparation of membranes Original Research Article

558

Study on the control of pore sizes of membranes using chemical methods Part IV. The role of organic acids Original Research Article

559

Study on the control of pore sizes of membranes using chemical methods: Part III. The performance of carbonates and bicarbonates in the membrane-making process by the chemical reaction Original Research Article

560

Study on the control rod interaction effect in RSG gas multipurpose reactor (MPR-30)

561

Study on the controlled growth of carbon nanospheres from de-oiled asphalt

562

Study on the controlling strategies of homogeneous charge compression ignition combustion with fuel of dimethyl ether and methanol

563

Study on the convective heat transfer and pressure drop in the micro-channel heat sink

564

Study on the conversion of cyanobacteria of Taihu Lake water blooms to biofuels

565

Study on the conversion of glycerol to nitriles over a Fe19.2K0.2/γ-Al2O3 catalyst

566

Study on the conversion of three natural statins from lactone forms to their corresponding hydroxy acid forms and their determination in Pu-Erh tea

567

Study on the cooling performance of sea salt solution during reflood heat transfer in a long vertical tube

568

Study on the coordination properties of [CeFx]4−x and [BFy]3−y in sulfuric acid medium by complexometric potentiometric titration

569

Study on the correlation between crystallite size and optical gap energy of doped ZnO thin film

570

Study on the correlations between the twin kilohertz quasi-periodic oscillations in low-mass X-ray binaries Original Research Article

571

Study on the corrosion properties of nanocrystalline nickel electrodepositied by reverse pulse current

572

Study on the corrosion residual strength of the 1.0 wt.% Ce modified AZ91 magnesium alloy

573

Study on the corrosion resistance of phytic acid conversion coating for magnesium alloys

574

Study on the coupled multiple nanocrystal quantum-dot system

575

Study on the coupling of esterification with pervaporation

576

Study on the covalence effect of the transition-metal in solids and its application for the electron states of ZnS:Co2+ crystal

577

Study on the Cr deposition and poisoning phenomenon at (La0.6Sr0.4)(Co0.2Fe0.8)O3−δ electrode of solid oxide fuel cells by transmission X-ray microscopy

578

Study on the Criteria of Interlocking Block Design from Industrial, Flexible and Demountable Approaches

579

Study on the critical roles of apoptosis in asthma disease

580

Study on the crystallization behavior of amorphous carbon nitride films

581

Study on the crystallization of poly(butylene azelate-co-butylene succinate) copolymers

582

Study on the crystallization process of NiP amorphous alloy

583

Study on the curing process and shearing tests of die attachment by Ag-epoxy electrically conductive adhesive

584

Study on the curing properties of SBR/La-GDTC/SiO2 composites

585

Study on the cut size of a turbo air classifier

586

Study on the cycle decomposition of CO2 over NiCr0.08Fe1.92O4 and the microstructure of products

587

Study on the cyclization of 6-arylethynylpyrimidine-5-carbaldehydes with tert-butylamine: microwave versus thermal preparation of pyrido[4,3-d]pyrimidines

588

Study on the cyclotriphosphazene film on magnetic head surface

589

Study on the Cytotoxic Effects of Iron Oxide Nanoparticles Synthesized by Cytoplasmic Extract of Lactobacillus Fermentum

590

Study on the cytotoxicity of microcystin-LR on cultured cells

591

Study on the damaging process of silica by in-reactor luminescence

592

Study on the damping behavior of Al/SiCp composite in thermal cycling

593

Study on the Data Mining Algorithm Based on Positive and Negative Association Rules

594

Study on the deactivation of amorphous NiB/SiO2 catalyst during the selective hydrogenation of cyclopentadiene to cyclopentene Original Research Article

595

Study on the deactivation phenomena of Cu-based catalyst for methanol synthesis in slurry phase

596

Study on the defects of ZnO nanowire

597

Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation

598

Study on the Deformation Behavior of Mg-3.6% Er Magnesium Alloy

599

Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling

600

Study on the deformation of die and product in closed die upsetting

601

Study on the degeneracy of antisense peptides using affinity chromatography

602

Study on the degradability of poly(ester amide)s derived from the α-amino acids glycine, and l-alanine containing a variable amide/ester ratio

603

Study on the degradation and stabilization of organic matter in waste by means of thermal analyses

604

Study on the degradation mechanism of organic light-emitting diodes (OLEDs)

605

Study on the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chloro-phenoxyacetic sodium (MCPA sodium) in natural agriculture-soils of Fuzhou, China using capillary electrophoresis Original Research Article

606

Study on the degradation of dicofol via electrochemical oxidation process: simulation and validation

607

STUDY ON THE DEMODULATION STRUCTURE OF READER RECEIVER IN A PASSIVE RFID ENVIRONMENT

608

Study on the densification of composite coating particles of α-Al2O3–SiO2

609

Study on the design earthquake resistance and degree of earthquake damage of reinforced concrete viaducts

610

Study on the design of inlet and exhaust system of a stationary internal combustion engine

611

Study on the design of precious metal based protective films for glass moulding process

612

Study on the Design Principles of Data Disaster Recovery System for Hospitals

613

Study on the design procedure for a multi-cool/heat tube system

614

Study on the design sensitivity analysis based on complex variable in eigenvalue problem

615

Study on the designing rules and processability of porous structure based on selective laser melting (SLM)

616

Study on the destabilization mixing in the flat plate photobioreactor by means of CFD

617

Study on the deterioration process of a chromium-free conversion coating on AZ91D magnesium alloy in NaCl solution

618

Study on the deterioration process of bipolar coating using electrochemical impedance spectroscopy

619

Study on the deteriorations of bituminous binder resulted from volatile organic compounds emissions

620

Study on the development method of panel parts with free form surface

621

Study on the development of a capacitance-type flowmeter for slush hydrogen Original Research Article

622

Study on the developmental toxicity of orally administered isobutylidenediurea in rats

623

Study on the device characteristics of FePc and FePcCl organic thin film Schottky diodes: Influence of oxygen and post deposition annealing

624

Study on the diagnosis time of developmental dysplasia of the hip

625

Study on the diamond tool drilling of engineering ceramics

626

Study on the diastereoselective synthesis of dithymidine phosphorothioates through a d-xylose derived chiral auxiliary and development of a novel catalyst

627

Study on the Diffraction Patterns of a"-Fe16N2 with Jack-1 and Jack-2 Structural Parameters

628

Study on the diffusion kinetics of adsorption of heavy rare earth with Cyanex272-P507 impregnated resin

629

Study on the dimer–monomer equilibrium of a fluorescent dye and its application in nucleic acids determination

630

Study on the direct decomposition of nitrous oxide over Fe-beta zeolites: From experiment to theory

631

Study on the direct liquefaction reactivity of Shenhua coal catalyzed by SO42–/ZrO2 solid acid

632

Study on the dissimilar magnesium alloy and copper lap joint by TIG welding

633

Study on the dissolution of heat-induced ovalbumin gel in alkaline solutions relevant to the removal of fouling deposits Original Research Article

634

Study on the dissolution process of zinc anode in ammoniacal ammonium chloride system

635

Study on the distortion of steel worm shafts

636

Study on the distribution and quantity of biomass residues resource in China

637

Study on the distribution of radioactive trace elements in vitamin D-overloaded rats using the multitracer technique

638

Study on the Distribution Regularity of Accompanying Harmful Elements in the Copper-Bearing Skarn Mine at the Fengshan in the Mineral Processing System

639

Study on the divided-wall electric desalting technology for Suizhong crude oil Original Research Article

640

Study on the doping stability and electronic structure of wurtzite Zn1−xCdxO alloys by first-principle calculations Original Research Article

641

Study on the Dose Enhancement of Gold Nanoparticles When Exposed to Clinical Electron, Proton, and Alpha Particle Beams by Means of Geant4

642

Study on the double cold crystallization peaks of poly(ethylene terephthalate) 3. The influence of the addition of calcium carbonate (CaCO3)

643

Study on the double fluorinated modification of the acrylate latex

644

Study on the drawbead restraining force in the stamping processes (in Polish) Badarne oporów kolnierza wywołanych dzialaniem progów ciłgowych w procesach tłoczenia blach

645

Study on the drawbead setting of the large deformation area in a trunk lid

646

Study on the dual frequency capacitively coupled plasmas by the particle-in-cell/Monte Carlo method

647

Study on the dynamic behavior of a current in cable-in-conduit conductors by using self magnetic field measurements

648

Study on the dynamic behavior of cylindrical steel liquid storage tanks using finite element method

649

Study on the dynamic behavior of Langmuir films at the air-water interface by a displacement current measuring method

650

Study on the dynamic characteristics of a new type externally pressurized spherical gas bearing with slot–orifice double restrictors

651

Study on the dynamic characteristics of a virtual-axis hybrid polishing machine tool by Tflexible multibody dynamics

652

Study on the dynamic characteristics of the low-stress vibration cropping machine

653

Study on the dynamic recrystallization behavior of Ti-alloy Ti–10V–2Fe–3V in β processing via experiment and simulation

654

Study on the dynamical behaviors of a two-dimensional discrete system Original Research Article

655

Study on the early stage of thin film growth in pulsed beam deposition by kinetic Monte Carlo simulation

656

Study on the economic and environmental benefits of different EV powertrain topologies

657

Study on the edge isolation of industrial silicon solar cells with waterjet-guided laser

658

Study on The Effect of Demulsifers on Crude oil and Petroleum Products

659

Study on the effect and mechanism of zirconia on the sinterability of yttria transparent ceramic

660

Study on the effect of a non-solvent additive on the morphology and performance of ultrafiltration hollow-fiber membranes Original Research Article

661

Study on the effect of adding co-solvent (n-alkoxyethanol) to sulfolan on the toluene extraction

662

Study on the effect of aminosilane functionalized nanoclay on the curing kinetics of epoxy nanocomposites

663

Study on the effect of apatite structure on spectroscopic properties of bismuth activated alkaline earth metal chlorophosphate [M5(PO4)3Cl; M = Ca, Sr and Ba]

664

Study on the effect of basalt fiber on the energy absorption characteristics of porous material

665

Study on the Effect of Bridge Windbreaks on the Aerodynamic Characteristics of High-Speed Trains Meeting under Crosswind

666

Study on the Effect of Casting Pressure on the Wear Resistance of Al-Si Alloy Prepared by Squeeze Casting

667

Study on the effect of cooling rate on the solidification parameters, microstructure, and mechanical properties of LM13 alloy using cooling curve thermal analysis technique

668

Study on the effect of corrosion on the tensile properties of the 1.0 wt.% Yttrium modified AZ91 magnesium alloy

669

Study on the Effect of Crocodile ICT 605 Software on Mathematics Learning for Teaching Flowchart Based on Constructivism Theory

670

Study on the effect of cultivation parameters and pretreatment on Rhizopus oryzae cell-catalyzed transesterification of vegetable oils for biodiesel production

671

Study on the effect of cutting location on shoot and IBA on rooting of ‘Night Jessamine’ (Cestrum nocturnum) stem cuttings

672

Study on the effect of different acids on the structure and photocatalytic activity of mesoporous titania

673

Study on the Effect of Different Growing Media on the Growth and Yield of Gerbera (Gerbera jamesonii L.)

674

Study on the effect of different plant density on some morphological traits and yield of safflower under irrigated and rain-fed planting conditions

675

Study on the effect of different protein sources on skeletal muscles of male albino rats

676

Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals

677

Study on the effect of dispersion phase morphology on porous structure of poly (lactic acid)/poly (ethylene terephthalate glycol-modified) blending foams

678

Study on the effect of distance between the two nozzle holes on interaction of high pressure combustion-gas jets with liquid

679

Study on the effect of engine operation parameters on cyclic combustion variations and correlation coefficient between the pressure-related parameters of a CNG engine

680

Study on the effect of flow maldistribution on the performance of the hollow fiber modules used in membrane distillation

681

Study on the Effect of Forming Parameters in Sheet Hydrodynamic Deep Drawing Using FEM-based Taguchi Method

682

Study on the effect of functionally graded coating layers on elastic deformation of thick circular plates: A closed-form elasticity solution

683

Study on the effect of hexamethylene diamine functionalized graphene oxide on the curing kinetics of epoxy nanocomposites

684

Study on the effect of humate and its removal on the precipitation of aluminium trihydroxide from the Bayer process

685

Study on the Effect of humic acid fertilizer on the amount of water loss in the single cross maize cultivar

686

Study on the Effect of Humidity on Electrical Properties of Copper-Silica Aerogel

687

Study on the effect of laser post-treatment on the properties of nanostructured Al2O3–TiB2–TiN based coatings developed by combined SHS and laser surface alloying

688

Study on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel

689

Study on the effect of left displacement of abomasum (LDA) on some serum minerals and biochemical changes in dairy cows

690

Study on the Effect of Levulinic Acid on Whey-Based Biosynthesis of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Hydrogenophaga pseudoflava

691

Study on the Effect of Oxygen Defects on the Electrical and Optical Properties of Thin Films

692

Study on the Effect of Paliurus spina-christi on Cholesterol, Triglyceride and HDL Levels in Diabetic Male Rats Fed a High Cholesterol Diet

693

Study on the effect of phenol anchored multiwall carbon nanotube on the curing kinetics of epoxy/Novolac resins

694

STUDY ON THE EFFECT OF PLANTING METHODS, PHOSPHORUS FERTILIZER AND SPRAYING WITH SOME NUTRIENTS UNDER NEWLY RECLAIMED SOILS ON YIELD AND QUALITY OF SUGAR BEET (BETA VULGARIS L.)

695

Study on the effect of polybutyl-2-cyanoacrylate nanoparticles and their metabolites on the phagocytic activity of peritoneal exudate cells of mice

696

Study on the Effect of Pomegranate Peel and Walnut Green Husk Extracts on the Antibacterial and Dyeing Properties of Wool Yarn Treated by Chitosan/Ag, Chitosan/Cu Nano-particles

697

Study on the effect of presence of TiH2 particles on the roll bonding behavior of aluminum alloy strips

698

Study on the effect of pressure and cooling rate on the solidification Characteristics and mechanical properties of Al-11%Si cast alloy

699

Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy

700

Study on the Effect of Rainfall Level on the Size of Silver Nanoparticles Synthesized by Plants of the Lamiaceae Family in Different Regions of Iran

701

Study on the effect of rare earth metal triflates as initiators in the cationic curing of DGEBA/γ-valerolactone mixtures and characterization of the thermosets obtained

702

Study on The Effect of Royal Jelly on Reproductive Parameters in Streptozotocin-Induced Diabetic Rats

703

Study on the effect of shape-stabilized phase change materials on spacecraft thermal control in extreme thermal environment

704

Study on the Effect of Small Molecule Compounds on the Structure and Properties of Coal

705

Study on the Effect of Solution Conditions on Heat Induced-Aggregation of Human Alpha Interferon

706

Study on the effect of solvent on the inclusion interaction of hydroxypropyl-β-cyclodextrin with three kinds of coumarins by phase solubility method

707

Study on the effect of sound duration on the annoyance of helicopter noise by applying a technique of time compression and expansion of sound signals

708

STUDY ON THE EFFECT OF SPACERS ON THE ULTIMATE CAPACITY OF INTERMEDIATE LENGTH THIN WALLED SECTION UNDER COMPRESSION

709

Study on the effect of structure of polydimethylsiloxane grafted with polyethyleneoxide on surface activities

710

Study on the effect of surface modifier on self-aggregation behavior of Ag nano-particle

711

Study on the effect of surfactants on morphologies of trigonal selenium in microfluidic reactor

712

Study on the Effect of Teachers’ Text Specific Comments and Rubber-Stamped Comments on Iranian EFL Learners’ Writing Ability

713

Study on the effect of temperature and pressure on nickel-electroplating characteristics in supercritical CO2

714

Study on the Effect of Temperature Requirements on Samany and Zaghloul Date Palms Performance under Three Different Conditions.

715

Study on the effect of the crack length on the JIC value Original Research Article

716

Study on the Effect of the Position of X-bracing Arrangement in the Steel Structures with a Triangular Plan

717

Study on the effect of the thermal regime differences in roadbed slopes on their thawing features in permafrost regions of Qinghai–Tibetan plateau

718

Study on the Effect of Total Intravenous Anesthesia (TIVA) on the Post-operative Respiratory Performance Regarding Early Extubation after Coronary Artery Bypass Graft (CABG) Surgery

719

Study on the effect of trace zirconium addition on the microstructural evolution in Cu–Zn–Al shape memory alloy

720

Study on the effect of trace zirconium addition on the microstructural evolution in Cu–Zn–Al shape memory alloy

721

Study on the effect of trace zirconium addition on the microstructural evolution in Cu–Zn–Al shape memory alloy

722

Study on the effect of ultrasonic waves on the characteristics of electroless nickel deposits from an acid bath

723

Study on the Effect of Vitamin C on the In Vitro Albumin Glycation Reaction

724

Study on the effect of wellbore heat capacity on steam injection well heat loss

725

Study on the effective decontamination and hydrolysis of sulfur mustard agent simulant using tenorite (CuO) nanoparticles as a destructive catalyst

726

Study on the effective decontamination and hydrolysis of sulfur mustard agent simulant using tenorite (CuO) nanoparticles as a destructive catalyst

727

Study on the Effectiveness of Prevention Strategies for the COVID-19 Pandemic: A Case Study in Ezhou, China

728

Study on the effectiveness of thermally treated rice husks for petroleum adsorption

729

Study on the effects and properties of hydrophobic poly(tetrafluoroethylene) membrane Original Research Article

730

Study on The Effects of Boron on The Structure of Chloroplasts of Cauliflower , By Using Light Scattering Technique

731

Study on the effects of chemical cleaning on pinaceae resin-based varnishes from panel and canvas paintings using pyrolysis-gas chromatography/mass spectrometry

732

Study on the effects of different sulfur vaporization temperature on the properties of CuInS2 thin films

733

Study on the Effects of Educational Environment (Physical Space and Educational Tools) on Learning and Teaching Mathematics

734

Study on the effects of hydraulically interconnected suspension system parameters on vehicle vibration characteristics

735

Study on the effects of matrix yield strength on hydride phase stability in Zircaloy-2 and Zr 2.5 wt% Nb

736

Study on the effects of mechanical pressure to the ultrastructure and secretion ability of mandibular condylar chondrocytes

737

Study on the Effects of Multimedia Monitoring System in Medical Teachers’ Microteaching Training

738

Study on the effects of probiotic, Pediococcusacidilactici in the diet on some biological indices of Oscar Astronautsocellatus

739

Study on the effects of pulsed TIG welding parameters on delta-ferrite content, shape factor and bead quality in orbital welding of AISI 316L stainless steel plate

740

Study on the effects of red pepper (Capsicum annuum) extract on immune responses and resistance of rainbow trout (Oncorhynchus mykiss) juveniles against Yersinia ruckeri

741

STUDY ON THE EFFECTS OF SEX HORMONES ON THE STRUCTURE OF GONADS AND TESTOSTERONE LEVEL IN POSTNATAL FEMALE RATS (N.M.RJ)

742

Study on the effects of spacer geometry in membrane feed channels using three-dimensional computational flow modeling

743

Study on the effects of the different temperatures on the viability of Sarcocystis bradyzoites

744

Study on the effects of the length and angle of inclined plate on the thixotropic microstructure of A356 aluminum alloy

745

Study on the Effects of the Resources for Fixing Budget Deficit on the Rate of Inflation in Iran in the Years 2001 to 2004.

746

Study on the effects of time, geographical side and color of wrapping materials on graft union percentage and scion growth of three commercial citrus cultivars on Mexican lime rootstock

747

Study on the effects of transformational leadership by managers and organizational justice consciousness on organizational citizenship behaviour of high-tech electronics industry in Taiwan

748

Study on the effects of well number on temperature characteristics in 1.3-μm InGaAsP–InP quantum-well lasers

749

Study on the Efficacy of Spirituality-Based Intervention on Spiritual Well Being of Patients with Leukemia: A Randomized Clinical Trial

750

Study on the efficacy of weed control in wheat (Triticum aestivum L.) with tank mixtures of grass herbicides with broadleaved herbicides

751

Study on the Efficiency of a Multi-layer Perceptron Neural Network Based on the Number of Hidden Layers and Nodes for Diagnosing Coronary- Artery Disease

752

Study on the efficiency of effective thermal conductivities on melting characteristics of latent heat storage capsules

753

Study on the Efficiency of Mathematics Distance Education

754

Study on the Efficiency of the Different units for Removing Metallic ions in Isfahan Water Treatment Plant

755

Study on the efficiency of the digging process using the model of excavator bucket

756

Study on the elastic–plastic interface and large deformation of axisymmetric disks under rotating status

757

Study on the electrical and mechanical properties of phenol formaldehyde resin/graphite composite for bipolar plate

758

Study on the electrical and mechanical properties of polyvinylidene fluroide/titanium silicon carbide composite bipolar plates

759

Study on the electrical and optical properties of Ag/Al-doped ZnO coatings deposited by electron beam evaporation

760

Study on the electrical conductivity and oxygen diffusion of oxide-ion conductors La2Mo2−xTxO9−δ (T = Al, Fe, Mn, Nb, V)

761

Study on the electrical properties and the effect of heat treatment on structure of Ge-Se-Te alloys

762

Study on the electrochemical behavior and differential pulse voltammetric determination of rhein using a nanoparticle composite film-modified electrode

763

Study on the electrochemical behavior of anticancer herbal drug rutin and its interaction with DNA

764

Study on the electrochemical behavior of dopamine with poly(sulfosalicylic acid) modified glassy carbon electrode

765

Study on the electrochemical behavior of dopamine with poly(sulfosalicylic acid) modified glassy carbon electrode Original Research Article

766

Study on the electrochemical behavior of epinephrine at a poly(3-methylthiophene)-modified glassy carbon electrode

767

Study on the electrochemical behavior of the viologen monolayers by different chemical structure

768

Study on the electrochemical behavior of vanadium nitride as a promising supercapacitor material Original Research Article

769

Study on the electrochemical characteristics of quasi-solid-state electric double layer capacitors assembled with sulfonated poly(ether ether ketone)

770

Study on the electrochemical detection of the macrolide antibiotics clarithromycin and roxithromycin in reversed-phase high-performance liquid chromatography

771

Study on the electrochemical performance of high-cycle LiMg0.08Mn1.92O4 cathode material prepared by a solid-state combustion synthesis

772

Study on the electrochemical properties of Mg0.8Ti0.1Al0.1−xPdxNi (x = 0.02–0.08) hydrogen storage alloys

773

Study on the electrochemiluminescent behavior of menadione sodium bisulfite in presence of luminol

774

Study on the electrodissolution and roughening of a palladium electrode in chloride containing solutions

775

Study on the electron cyclotron resonance plasma chemical vapor deposition of carbon nanotubes

776

Study on the electron momentum density distribution and the Fermi surface of the ordered inter-metallic phase B2-NiAl

777

Study on the electron structure and optical properties of Ga0.5Al0.5As(1 0 0) β2(2 × 4) reconstruction surface

778

Study on the electronic effect on coordinating donors in heptacoordinate trichlorogermanes

779

Study on the electronic effects on stereoconservativity of Suzuki coupling in chiral groove of binaphthyl

780

Study on the electronic structure of phenylene vinylene dimers with different substituents

781

Study on the electronic structure of pyrazoline derivatives with different substituents

782

Study on the electronic structures and absorption spectra for sheelite- and the sheelite-like structures lead tungstate crystal

783

Study on the electronic structures and absorption spectra for sheelite- and the sheelite-like structures lead tungstate crystal

784

Study on the electronic structures of the reduced anatase TiO2 by the first-principle calculation Original Research Article

785

Study on the electrostatic adsorption self-assembly multilayers fabricated by sulphonated elastomer and TiO2 colloids

786

Study on the emission mechanism during devolatilization/char oxidation and direct oxidation of olive solid waste in a fixed bed reactor

787

Study on the emission mechanism during devolatilization/char oxidation and direct oxidation of olive solid waste in a fixed bed reactor

788

Study on the Emission Performance of Clinical Waste Incinerator Plants in Malaysia

789

STUDY ON THE EMPATHIC SKILL LEVELS OF ELEMENTARY SCHOOL FOURTH GRADE STUDENTS AND THE PARENTAL ATTITUDES PERCEIVED BY THEM

790

Study on the energy band structure and photoelectrochemical performances of spinel Li4Ti5O12

791

Study on the energy response to neutrons for a new scintillating-fiber-array neutron detector

792

Study on the energy response to neutrons for a new scintillating-fiber-array neutron detector

793

Study on the enhancement of catalytic activity for hemoglobin by quinhydrone in poly(o-aminophenol) film

794

Study on the enhancement of electrochemiluminescence of luminol–H2O2 system by sulphonated cobalt(II) phthalocyanine Original Research Article

795

Study on the Environmental Factors Contributing to Distribution of Thymus kotschyanus in Taleghan Basin, Iran

796

Study on the environmentally friendly anodizing of AZ91D magnesium alloy

797

Study on the environment-resource-economy comprehensive efficiency evaluation of the biohydrogen production technology

798

Study on the equivalent circuit and coupled vibration for the longitudinally polarized piezoelectric ceramic hollow cylinders

799

Study on the Erosion Characteristics of Non-spherical Particles in Liquid-solid Two-phase Flow

800

Study on the essential management system of the coal mines

801

Study on the estimation of precipitation resources for rainwater harvesting agriculture in semi-arid land of China

802

Study on the ET Process of SOD at Cysteine Modified Gold Electrode

803

Study on the eutectic modification level of Al–7Si Alloy by computer aided recognition of thermal analysis cooling curves

804

Study on the evaluation of localized corrosion of 2024T3 aluminum alloy with EIS

805

Study on the evaluation of localized corrosion of 2024T3 aluminum alloy with EIS

806

Study on the evolution of dynamic mechanics properties of cement mortar under sulfate attack

807

STUDY ON THE EVOLUTION OF THE BODY HEIGHT SIZES IN MALE YOUNG HORSES OF THE SHAGYA BREED

808

Study on the evolution processes from TiCx to TiB2 induced by B in Al melt

809

Study on the excited state intramolecular proton transfer of 4′-N,N-diethylamino-3-hydroxyflavone in imidazolium-based room temperature ionic liquids

810

Study on the exergy loss of the horizontal concentric micro-fin tube heat exchanger

811

Study on the expansion of concrete under attack of sulfate and sulfate–chloride ions

812

Study on the extensibility of video conferencing with speech mixing

813

Study on the extension of lean operation limit through hydrogen enrichment in a natural gas spark-ignition engine

814

Study on the extraction of palladium(II) and platinum(IV) using LIX 84I

815

Study on the fabrication conditions of TiO2 pillared porous manganese oxide nanocompound

816

Study on the fabrication of Al matrix composites strengthened by combined in-situ alumina particle and in-situ alloying elements

817

Study on the factors affecting simultaneous removal of ammonia and manganese by pilot-scale biological aerated filter (BAF) for drinking water pre-treatment

818

Study on the failure behavior of three dierent stabilized problematic soils

819

Study on the fate of As, Hg and Pb in Yima coal via sub-critical water extraction

820

Study on the fate of metal elements from biomass in a bench-scale fluidized bed gasifier

821

Study on the fate of petroleum-derived polycyclic aromatic hydrocarbons (PAHs) and the effect of chemical dispersant using an enclosed ecosystem, mesocosm

822

Study on the fatigue crack growth rates of Ti–5Al–5Mo–5V–1Cr-1Fe titanium alloy with basket-weave microstructure

823

Study on the fatigue of steel highway bridges in Japan

824

Study on the fatigue properties of plasma nitriding S45C with a pre-ultrasonic nanocrystal surface modification process

825

Study on the fatigue strength of AA 6082-T6 adhesive lap joints

826

Study on the Fault Diagnosis Technique of Aerial Camera Exposure Board Based on Petri Net

827

Study on the Fauna of Aquatic Insects in Northwestern Iran

828

Study on the FCC Process in a Novel Riser-Downer-Coupling Reactor (I): Hydrodynamics and Mixing Behaviors

829

Study on the FCC Process in a Novel Riser-Downer-Coupling Reactor (II): Simulation and Hot Experiments

830

Study on the feasibility of split crossing distillation compartment boundary

831

Study on the feasibility of the torsion extrusion (TE) process as a severe plastic deformation method for consolidation of Al powder

832

Study on the features of multiwalled carbon nanotube supported nickel aluminum mixed oxides Original Research Article

833

Study on the ferrite grain refinement during intercritical deformation of a microalloyed steel

834

Study on the ferroelectricity of Eu substituted films

835

Study on the ferromagnetism in Co and N doped ZnO thin films

836

Study on the fingerprint profile of Monascus products with HPLC–FD, PAD and MS

837

Study on the fishing performance of an alternative tubular-type pot for the common octopus, Octopus minor, in Korean coastal waters

838

Study on the flexural behaviors of RC beams after freeze-thaw cycles

839

Study on the flexural fatigue performance and fractal mechanism of concrete with high proportions of ground granulated blast-furnace slag

840

STUDY ON THE FLEXURAL VIBRATION OF RECTANGULAR THIN PLATES WITH FREE BOUNDARY CONDITIONS

841

Study on the floatation mechanism and floatation performance for the floatation cyclone of natural inlet air

842

Study on the flocs poly-β-hydroxybutyrate production and process optimization in the bio-flocs technology system

843

Study on the flotation behaviour of low energy materials at low surface tensions

844

Study on the flow distribution in prismatic VHTR core with a multi-block experiment and CFD analysis

845

Study on the flow production characteristics of deep geothermal wells

846

Study on the flow structure at the spanwise edge of spreading turbulent region and its control

847

Study on the fluidity of AZ91+xRE magnesium alloy

848

Study on the fluidity of AZ91+xRE magnesium alloy

849

Study on the fluidization and discharge characteristics of cohesive coals from an aerated hopper

850

Study on the fluorescence characteristics of bromadiolone in aqueous and organized media and application in analysis

851

Study on the fluoride adsorption of various apatite materials in aqueous solution

852

Study on the foaming behaviour of allyl ether-based polycarboxylate superplasticizers

853

Study on the formation and phase transformation of 1D nanostructured Fe3O4 particles under an external magnetic field

854

Study on the formation and transport of ozone in relation to the air quality management and vegetation protection in Tenerife (Canary Islands)

855

Study on the formation during the production of lead-free piezoceramics at the morphotropic phase boundary

856

Study on the formation of an apatite layer on NiTi shape memory alloy using a chemical treatment method

857

Study on the formation of CoxFe3−xO4 system using two low temperature synthesis methods

858

Study on the formation of cubic texture in Ni–7 at.% W alloy substrates by powder metallurgy routes Original Research Article

859

Study on the formation of MCr2O4/SiO2 nanocomposites from hybrid gels PVA–TEOS–metal nitrates

860

Study on the formation of new Mg–Cu–Ti–Y quaternary bulk metallic glasses with high mechanical strength

861

Study on the formation of PbSe nanoclusters at the interfaces of PbSe/ZnSe multiple quantum well structure

862

Study on the formation of periodic ridges on the rubber surface by friction and wear monitoring

863

Study on the formation of phenols during coal flash pyrolysis using pyrolysis-GC/MS

864

Study on the formation of rhenium borides by density functional calculations

865

Study on the formation of silicon nanoparticles during laser ablation using a low-pressure differential mobility analyzer

866

Study on the formation of the Prussian blue films on the polypyrrole surface as a potential mediator system for biosensing applications Original Research Article

867

Study on the formation of β-crystal during the crystallization process of polypropylene reactor granule

868

Study on the formation process of Al2O3–TiO2 composite powders

869

Study on the formation, determination, and removal of elemental sulfur in ultra-low sulfur gas oil

870

Study on the forming parameters of the metal bellows

871

Study on the fouling behavior of HDPE/PE-g-MA/EVA blend membrane fabricated via thermally induced phase separation method

872

Study on the fracture reason and fatigue life for guide pillar of injection machine

873

Study on the fragmentation of shells

874

Study on the free vibration of thick functionally graded rectangular plates according to a new exact closed-form procedure

875

Study on the freezing characteristics of silty clay under high loading conditions

876

Study on the frequency of pregnant ewes slaughtered in Khorram Abad abattoir, Iran.

877

Study on the Frequent Expression of Rodgers and Chido, Red Blood Cell Antigens, in Iranian Healthy Population

878

Study on the friction and wear behavior of basalt fabric composites filled with graphite and nano-SiO2

879

Study on the friction and wear behavior of POM/Al2O3 nanocomposites

880

Study on the friction and wear performance of carbon fabric/phenolic composites under oil lubricated conditions

881

Study on the friction and wear properties of carbon fabric composites reinforced with micro- and nano-particles

882

Study on the friction and wear properties of glass fabric composites filled with nano- and micro-particles under different conditions

883

Study on the friction and wear properties of glass fabric composites filled with nano- and micro-particles under different conditions

884

Study on the friction and wear properties of the composites made of surface modified-Nomex fabrics

885

Study on the friction coefficient in grinding

886

Study on the Friction of Bored Cylindrical Rubber Protrusions Sliding on Ceramic

887

Study on the friction of κ-carrageenan hydrogels in air and aqueous environments

888

Study on the fuel balance of a DT reactor

889

Study on the fundamental characteristics of a filter press dryer with a featured model dryer

890

STUDY ON THE FUNDAMENTAL FREQUENCIES OF RECTANGULAR CONCRETE TANKS USING FEM AND ANALYTICAL CODES

891

Study on the fuzzy ranking of granite sawability

892

Study on the gas evolution and char structural change during pyrolysis of cotton stalk

893

Study on the gas evolution and char structural change during pyrolysis of cotton stalk

894

Study on the gas phase HBr-catalyzed reaction between UF6 and SiH4 at room temperature Original Research Article

895

Study on the gasification of wastepaper/carbon dioxide catalyzed by molten carbonate salts

896

Study on the gas-phase photolytic and photocatalytic oxidation of trichloroethylene

897

Study on the gas–solid flow and heat transfer characteristics of evaporating recycle valve

898

Study on the gel casting of fused silica glass

899

Study on the general principle of normal circular-arc gear transmission

900

Study on the generalized mathematical model of noncircular gears

901

Study on the generalized thermoelastic vibration of the optically excited semiconducting microcantilevers

902

Study on the genomic diversity of Hymenolepis nana between rat and mouse isolates by RAPD-PCR

903

Study on the genotoxicity of HA/ZrO2 composite particles in vitro

904

Study on the genus Triaspis Haliday, 1835 (Hymenoptera: Braconidae, Brachistinae) in Northern Iran, with two new records

905

Study on the genus Triaspis Haliday, 1835 (Hymenoptera: Braconidae, Brachistinae) in Northern Iran, with two new records

906

Study on the glycerolysis reaction of high free fatty acid oils for use as biodiesel feedstock

907

Study on the grafting of chitosan–gelatin microcapsules onto cotton fabrics and its antibacterial effect

908

Study on the granular characteristics of starches separated from Chinese rice cultivars

909

Study on the graphite and carbon fiber modified asphalt concrete

910

Study on the green upconversion saturation in Er3+ doped oxyfluoride tellurite glass

911

Study on the grinding of advanced ceramics with slotted diamond wheels

912

Study on the ground surface quality of Cr2O3 coatings

913

Study on the Groundwater Accumulation of Oke-Ogba Area using Groundmagnetic Survey

914

Study on the growth and optical activity of Sr3NbGa3Si2O14 single crystals

915

Study on the growth and optical activity of Sr3NbGa3Si2O14 single crystals

916

Study on the growth and survival of Escherichia coliO157:H7 during the manufacture and storage of Iranianwhite cheese in brine

917

Study on the growth and thermal characteristics of mercury indium telluride crystals

918

Study on the growth mechanism of silver nanorods in the nanowire-seeding polyol process

919

Study on the growth of (Achillea millefolium L.) medicinal plant by soil inoculation of mountainous area with selected mycorrhizal fungi

920

Study on the growth parameters of Capoeta trutta (Heckel, 1843) in Shour River, Iran

921

Study on the harm effects of releases from liquid hydrogen tank by consequence modeling

922

Study on the heat hazard of deep exploitation in high-temperature mines and its evaluation index

923

Study on the heat transfer and flow characteristics in a spiral-coil tube

924

Study on the heat transfer and sorption characteristics of a consolidated composite sorbent for solar-powered thermochemical cooling systems

925

Study on the heat transfer characteristics of an evaporative cooling tower

926

Study on the heat transfer characteristics of the annular fin under dry-surface, partially wet-surface, and fully wet-surface conditions

927

Study on the heat transfer of high-vacuum-multilayer-insulation tank after sudden, catastrophic loss of insulating vacuum Original Research Article

928

Study on the heavy metal bioconcentrations of the Shadegan international wetland mosquitofish, Gambusia affinis, by inductively coupled plasma technique

929

Study on the Heck reaction promoted by carbene adduct of cyclopalladated ferrocenylimine and the related reaction mechanism

930

Study on the height effect of highway embankments in permafrost regions

931

Study on the heterogeneous degradation of chitosan with H2O2 catalyzed by a new supermolecular assembly crystal: [C6H8N2]6H3[PW12O40]·2H2O Original Research Article

932

Study on the heterogeneous degradation of chitosan with hydrogen peroxide under the catalysis of phosphotungstic acid

933

STUDY ON THE HETEROZIS EFFECT IN EARLY EMBRYOGENESIS OF THE COMMERCIAL CHICKEN BROILER HYBRIDS

934

Study on the high-pressure properties of KCl crystal by inversion pair potentials

935

Study on the hole-type traps in BaFCl:Eu2+ phosphor

936

Study on the hot deformation behavior of TC4-DT alloy with equiaxed α+β starting structure based on processing map

937

Study on the hydration heat of binder paste in high-performance concrete

938

Study on the hydration of Ba-bearing calcium sulphoaluminate in the presence of gypsum

939

Study on the hydrodynamics of the Ebro river lower course using tritium as a radiotracer

940

Study on the hydroforming process for automobile radiator support members

941

Study on the hydrogen demand in China based on system dynamics model

942

Study on the hydrogen desorption mechanism of a Mg–V composite prepared by SPS

943

Study on the hydrogen storage properties and reaction mechanism of NaAlH4–MgH2–LiBH4 ternary-hydride system

944

Study on the hydrogen storage properties of core–shell structured Mg–RE (RE = Nd, Gd, Er) nano-composites synthesized through arc plasma method

945

Study on the hydrogenation of Zircaloy-4

946

Study on the hydrolytic degradation of poly(α,β-malic acid) by direct polycondensation

947

Study on the hydrophobic surfaces prepared by two-step sol–gel process

948

Study on the hydrothermal reaction of FeCl 3 solution in the presence of poly(vinyl alcohol)

949

Study on the hydrothermal stability of MCM-41 via secondary restructure

950

Study on the hydrothermal treatment of Shenhua coal

951

Study on the hygiene knowledge of food handlers working in small and medium-sized companies in western Romania

952

STUDY ON THE IMMATURE STAGES OF POEKILOCERUS PICTUS (FABRICUS, 1775) (ORTHOPTERA: ACRIDOIDEA: PYRGOMORPHIDAE)

953

Study on the immune enhancement of different immunoadjuvants used in the pentavalent vaccine for turbots

954

Study on the immunogenicity of pcDNA3.1(+)-cagT recombinant vector against Helicobacter pylori in BALB/c mice

955

Study on the immunopathologic effects of 4(3H)-quinazolinone-2-ethyl-2-phenyl ethyl (QEPE) in newborn Balb/C mice

956

Study on the Impact Wear Characteristics of Catalyst Particles at 90° Elbow via CFD-DEM Coupling Method

957

STUDY ON THE IMPEDANCE-MATCHING TECHNIQUE FOR HIGH-TEMPERATURE SUPERCONDUCTING MICROSTRIP ANTENNAS

958

Study on the Implementation of Drainage System at Universiti Tun Hussein Onn Malaysia (UTHM)

959

Study on the improvement in continuously variable transmission efficiency with a thermal management system

960

Study on the inclusion interactions of β-cyclodextrin and its derivative with dyes by spectrofluorimetry and its analytical application

961

Study on the incorporation of photovoltaic systems as an auxiliary power source for hybrid and electric vehicles

962

Study on the increase mechanism of the caffeine content during the fermentation of tea with microorganisms

963

Study on the increase of inactive germanium layer in a high-purity germanium detector after a long time operation applying MCNP code

964

Study on the increase of inactive germanium layer in a high-purity germanium detector after a long time operation applying MCNP code

965

Study on the indentation size effect in CaF2: Dislocation structure and hardness Original Research Article

966

Study on the industry internationalization of Taiwanese opera

967

Study on the inertance tube and double-inlet phase shifting modes in pulse tube refrigerators

968

Study on the inertia effect of helical spring of the absorber on suppressing the dynamic responses of a beam subjected to a moving load

969

Study on the infectivity of Trypanosoma evansi isolate in Savannah Brown bucks

970

Study on the influence of additives in an industrial calcium fluoride and waterworks sludge co-melting system

971

Study on the influence of adiponectin genetic variants and adiponectin levels among Indonesian women with polycystic ovary syndrome

972

Study on the influence of airflow on the temperature of the surrounding rock in a cold region tunnel and its application to insulation layer design

973

Study on the influence of albedo on building heat environment in a year-round

974

Study on the influence of attached mortar content on the properties of recycled concrete aggregate

975

Study on the influence of channel structure properties in the dehydration of glycerol to acrolein over H-zeolite catalysts Original Research Article

976

Study on the influence of friction in an automatic ball balancing system

977

Study on the influence of heat treatment on the crystallographic phases of nanostructured TiO2 films

978

Study on the Influence of Several Elements of Scanned Patterns on the Quality of 3D Body Scanned Data by using Structured Light Technique

979

Study on the influence of steel-fibre-reinforced concrete on the behaviour of anchorage for steel liners Original Research Article

980

Study on the influence of the free volume of hybrid membrane on pervaporation performance by positron annihilation spectroscopy

981

Study on the influence of the so-called filtration enzyme action on the membrane filtration process of wheat starch hydrolysates Original Research Article

982

Study on the Influence of Thermal Stress in the Firing of a Ceramic Body

983

Study on the Influence of Thermal Stress in the Firing of a Ceramic Body

984

Study on the influence of TiO2 on the insulating strength of ZnO–ZnF2–B2O3 glasses by means of dielectric properties

985

Study on the influence of work-hardening modeling in springback prediction

986

Study on the influence of X-ray tube spectral distribution on the analysis of bulk samples and thin films: Fundamental parameters method and theoretical coefficient algorithms

987

Study on the influence of X-ray tube spectral distribution on the analysis of bulk samples and thin films: Fundamental parameters method and theoretical coefficient algorithms

988

Study on the influences of geometrical parameters on the formability of stretch curved flanging by numerical simulation

989

Study on the inhomogeneity of single crystal along the growth direction

990

Study on the initial electrodeposition behavior of Ni–P alloys

991

Study on the initial stages of water corrosion of fluorozirconate glasses

992

Study on the initiation stage of stress corrosion of an aluminum alloy using the subjective speckle technique

993

Study on the initiation step of 2-(9-carbazolyl)ethyl glycidyl ether polymerization by K−, K+ (15-crown-5)2

994

Study on the initiation step of vinyloxirane and 3-butenyloxirane polymerization by alkalide K−, K+(15-crown-5)2

995

Study on the inner surface finishing of aluminum alloy 2014 by ball burnishing process

996

Study on the inorganic–organic surface modification of potassium titanate whisker

997

Study on the insertion behaviors of Lithium-ions into CoFe3Sb12 based electrodes

998

Study on the insertion process of human apolipoprotein H into spread phospholipid monolayers by monitoring the initial change in surface pressure

999

Study on the integrated membrane processes of dehumidification of compressed air and vapor permeation processes

1000

Study on the Intentional Choice Mechanism of Course Selection Based on Swarm Intelligence Algorithm

بازگشت