بر اساس عنوان

1
Modeling and assessing hydrologic processes for historical and potential land-cover change in the Duoyingping watershed, southwest China
2
Modeling and Assessing the Consequences of Oil Pipeline Leakage Using PHAST Software: A Case Study; Jarahi River in Southwest of Iran
3
Modeling and assimilation of root zone soil moisture using remote sensing observations in Walnut Gulch Watershed during SMEX04
4
Modeling and Automated Containment of Worms
5
Modeling and availability analysis of internet data center with various maintenance policies
6
Modeling and Backstepping-based Nonlinear Control Strategy for a 6 DOF Quadrotor Helicopter
7
Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities
8
Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities
9
Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities
10
Modeling and Biokinetics in Anaerobic Acidogenesis of Starch-Processing Wastewater to Acetic Acid
11
Modeling and broadening temporal user interest in personalized news recommendation
12
Modeling and calculating the effect of treatment at baseline from panel outcomes
13
Modeling and calculation of electromagnetic field in the surroundings of a large power transformer
14
Modeling and calculation of field emission enhancement factor for carbon nanotubes array
15
Modeling and calculation of field emission enhancement factor for carbon nanotubes array
16
Modeling and calculation of open carbon dioxide refrigeration system
17
Modeling and characterization of a bimorph impedance transducer
18
Modeling and characterization of a chemomechanical actuator using protein transporter
19
Modeling and characterization of a radiation sensitive p-channel transistor in a floating n-well
20
Modeling and characterization of a radiation sensitive p-channel transistor in a floating n-well
21
Modeling and Characterization of Air Pollution: Perspectives and Recent Developments with a focus on the Campania Region (Southern Italy)
22
Modeling and characterization of atomically sharp “perfect” Ge/SiO2 interfaces
23
Modeling and characterization of damping in carbon nanofiber/polypropylene composites
24
Modeling and characterization of damping in carbon nanofiber/polypropylene composites
25
Modeling and characterization of dynamic failure of borosilicate glass under compression/shear loading
26
Modeling and characterization of fiber-reinforced (FRP) plastic honeycomb sandwich panels for bridge deck
27
Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications
28
Modeling and characterization of metal droplets generation by using a pneumatic drop-on-demand generator
29
Modeling and characterization of piezoelectric cantilever in fluids at different temperatures
30
Modeling and characterization of polyelectrolyte complex of polyaniline and sulfonated polystyrene produced by palm tree peroxidase
31
Modeling and characterization of sigma-delta analog-to-digital converters
32
Modeling and characterization of strengthened concrete tension members
33
Modeling and Characterization of the 3rd Order Charge-Pump PLL: a Fully Event-driven Approach
34
Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites
35
Modeling and characterization of the magnetocaloric effect in Ni2MnGa materials
36
Modeling and characterization of the polymer stud grid array (PSGA) package: electrical, thermal and thermo-mechanical qualification
37
Modeling and characterization of three kinds of MEMS resonators fabricated with a thick polysilicon technology
38
Modeling and characterization of two-phase composites by Voronoi diagram in the Laguerre geometry based on random close packing of spheres
39
Modeling and characterization of viscoelasticity of PI/SiO2 nanocomposite films under constant and fatigue loading
40
Modeling and classifying color textures using random fields in a random environment
41
Modeling and classifying color textures using random fields in a random environment^
42
Modeling and classifying color textures using random fields in a random environment^
43
Modeling and comparative thermal performance of ground air collector and earth air heat exchanger for heating of greenhouse
44
Modeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm
45
Modeling and compensating non-uniformity in push-broom NIR hyperspectral imaging system
46
Modeling and Computation of Boundary-Layer Flows – Solutions Manual and Computer Programs: by T. Cebeci and J. Cousteix (Springer-Verlag, Berlin, Germany, 2001, 288 pp.) Euro 94,95 hardcover, ISBN 3-540-41227-1
47
Modeling and computation of cavitation in vortical flow
48
Modeling and computation of fluid–membrane interaction Original Research Article
49
Modeling and Computation of Random Thermal Fluctuations and Material Defects in the Ginzburg–Landau Model for Superconductivity
50
Modeling and computation of two phase geometric biomembranes using surface finite elements
51
Modeling and computational simulation of adsorption based chemical heat pumps
52
Modeling and computer simulation of the identification problem related to the sludge concentration in a settler
53
Modeling and computing throughput capacity of wireless multihop networks
54
Modeling and control approach to a distinctive quadrotor helicopter
55
Modeling and control design for governing hydroelectric turbines with leaky Wicket gates
56
Modeling and control design of a static synchronous series compensator
57
Modeling and control design of hydrogen production process for an active hydrogen/wind hybrid power system
58
Modeling and Control Electric and Heating Sources in a Building Using MPC
59
Modeling and Control for HIV/AIDS Transmission in China Based on Data from 2004 to 2016
60
Modeling and control for nonlinear structural systems via a NN-based approach
61
Modeling and control for thermal balancing of multi-core processors
62
Modeling and control in bioprocesses
63
Modeling and control issues for autonomous aerial refueling for UAVs using a probe–drogue refueling system
64
Modeling and control of a cascaded doubly-fed induction generator based on dynamical equivalent circuits Original Research Article
65
Modeling and control of a direct laser powder deposition process for Functionally Graded Materials (FGM) parts manufacturing
66
Modeling and control of a flexible rotor system with AMB-based sustentation
67
Modeling and control of a flexible solar array paddle as a clamped-free-free-free rectangular plate
68
Modeling and control of a helicopter slung-load system
69
Modeling and control of a mixed-flow rice dryer with emphasis on breakage quality Original Research Article
70
Modeling and Control of a Naphtha Thermal Cracking Pilot Plant
71
Modeling and control of a natural circulation loop
72
Modeling and control of a new horizontal-shaft hybrid-type magnetic bearing
73
Modeling and Control of a Nonlinear Active Suspension Using Multi-Body Dynamics System Software
74
Modeling and Control of a Novel Six-Leg Three-Phase High-Power Converter for Low Voltage Fuel Cell Applications
75
Modeling and control of a PEM fuel cell based hybrid multilevel inverter
76
Modeling and Control of a Photovoltaic Energy System Using the State-Space Averaging Technique
77
Modeling and control of a piezoelectric actuator driven system with asymmetric hysteresis
78
Modeling and control of a pneumatically actuated inverted pendulum
79
Modeling and control of a push–pull converter for photovoltaic microinverters operating in island mode
80
Modeling and control of a semiconductor manufacturing process with an automata network: An example in plasma etch processing
81
Modeling and control of a SOFC-GT-based autonomous power system
82
MODELING AND CONTROL OF A VARIABLE SPEED VARIABLE PITCH ANGLE PROTOTYPE WIND TURBINE
83
Modeling and Control of a Variable-Speed Constant-Frequency Synchronous Generator With Brushless Exciter
84
Modeling and control of a web-fed machine
85
Modeling and control of a wind fuel cell hybrid energy system
86
Modeling and control of a wind turbine driven doubly fed induction generator
87
MODELING AND CONTROL OF ACETYLENE HYDROGENATION PROCESS
88
Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—I. Control-oriented modeling
89
Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—II. Linear and adaptive nonlinear control
90
Modeling and control of an atomic force microscope using a piezoelectric tuning fork for force sensing
91
Modeling and control of an eddy current brake
92
Modeling and control of an industrial pressure screen
93
Modeling and control of an LDPE autoclave reactor
94
Modeling and Control of Autonomous Underwater Vehicle (AUV) In Heading and Depth Attitude via PPD Controller with State Feedback
95
Modeling and control of cement grinding processes
96
Modeling and Control of Compliant Assembly Systems
97
Modeling and Control of Contact Between Constrained Rigid Bodies
98
Modeling and Control of Cooperative Teleoperation Systems
99
Modeling and control of C-UPFC for power system transient studies
100
Modeling and control of DFIG-based variable-speed wind-turbine
101
Modeling and control of discrete event systems using finite state machines with variables and their applications in power grids
102
Modeling and control of distributed generation systems including PEM fuel cell and gas turbine
103
MODELING AND CONTROL OF DISTRIBUTED GENERATION SYSTEMS INCLUDING WIND AND GAS TURBINE ON AZARBAIJAN ELECTRIC NETWORK
104
Modeling and control of distributed thermal systems
105
Modeling and control of expressiveness in music performance
106
Modeling and control of flow problems by adaptation-based linear parameter varying models
107
Modeling and control of formations of nonholonomic mobile robots
108
MODELING AND CONTROL OF GAS TURBINE COMBUSTOR WITH DYNAMIC AND ADAPTIVE NEURAL NETWORKS
109
Modeling and control of hierarchical systems with fuzzy systems
110
Modeling and control of high-throughput screening systems in a max-plus algebraic setting
111
Modeling and control of high-throughput screening systems in a max-plus algebraic setting
112
Modeling and control of HVOF thermal spray processing of WC–Co coatings
113
Modeling and control of hybrid photovoltaic wind power system with battery storage
114
Modeling and control of hysteresis in magnetostrictive actuators
115
Modeling and control of impact in mechanical systems: theory and experimental results
116
Modeling and Control of Linear Two-time Scale Systems: Applied to Single-Link Flexible Manipulator
117
Modeling and control of MEMS with high speed synchronous micromotors and controllers/drivers-on-VLSI-chip Ics
118
Modeling and control of microgrid: An overview
119
MODELING AND CONTROL OF MULTI-LEVEL INVERTER FOR THREE-PHASE GRID-CONNECTED PHOTOVOLTAIC SOURCES
120
Modeling and control of nonlinear micro-distributed systems Original Research Article
121
Modeling and control of nonlinear systems using novel fuzzy wavelet networks: The output adaptive control approach
122
Modeling and Control of Oxygen Transfer in High Purity Oxygen Activated Sludge Process
123
Modeling and control of PEMFC based on least squares support vector machines
124
Modeling and control of physical processes using proper orthogonal decomposition
125
Modeling and control of power flow in a double-beam system
126
Modeling and control of quasi-keyhole arc welding process
127
Modeling and Control of Robot Manipulators [Book Reviews]
128
Modeling and control of robot manipulators: L. Sciavicco and B. Siciliano; Springer, Berlin, 2000, ISBN: 1-85233-221-2
129
Modeling and control of robot manipulators: Lorenzo Sciavicco and Bruno Siciliano; Mc Graw-Hill, New York, 1996, ISBN 0-07-114726-8
130
Modeling and control of thawing phenomena in solute-impregnated frozen foods Original Research Article
131
Modeling and control of the agitation–sedation cycle for critical care patients
132
Modeling and control of the doubly fed induction generator wind turbine
133
Modeling and control of the high damping behavior in Ti–Nb–O alloys
134
Modeling and control of the magnetic suspension system
135
Modeling and Control of Three-Phase Shunt Active Power Filter
136
Modeling and control of two manipulators handling a flexible object
137
Modeling and control of unbalanced three-phase systems containing PWM converters
138
Modeling and control of unified power flow controller for transient stability
139
Modeling and control of unified power flow controller for transient stability
140
Modeling and control of V/f controlled induction motor using genetic-ANFIS algorithm
141
Modeling and Control of Vinyl Chloride in Drinking Water Distribution Systems
142
Modeling and Control of Water Level in Boiler Drum for Nassiriyah Thermal Power Plant
143
Modeling and Control of Welding Flexible Manufacturing Cell Using Petri Net
144
MODELING AND CONTROL OF WIND TURBINE AND FAULT
145
Modeling and control tuning of a hydro station with units sharing a common penstock section
146
Modeling and controllability for a class of hybrid mechanical systems
147
Modeling and Controller Design for a Coupled-Tank Liquid Level System: Analysis and Comparison
148
Modeling and controller design for complex flexible nonlinear systems via a fuzzy singularly perturbed approach
149
Modeling and controller design of a Maglev guiding system for application in precision positioning
150
Modeling and controller design of inner-formation flying system with two proof-masses
151
Modeling and controller performance assessment for a switched reluctance motor drive based on setpoint relay
152
Modeling and controllers design of the China CLEAR-IB
153
Modeling and controlling clarifier–thickeners fed by suspensions with time-dependent properties
154
Modeling and controlling variation propagation in mechanical assemblies using state transition models
155
Modeling and coordinate control of photovoltaic DC building module based BIPV system
156
Modeling and copying human head movements
157
Modeling and correction of soil penetration resistance for varying soil water content
158
Modeling and co-simulation of a parabolic trough solar plant for industrial process heat
159
Modeling and Cost Minimization of Weight Reduction Process of a Polyethylene Terephthalate Fabric by Sodium Hydroxide
160
Modeling and coupling of soil respiration and soil water content in fenced Leymus chinensis steppe, Inner Mongolia
161
Modeling and coupling of soil respiration and soil water content in fenced Leymus chinensis steppe, Inner Mongolia
162
Modeling and cycling control of carbonate fuel cell power plants
163
Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact
164
Modeling and data analysis of a Forbush decrease Original Research Article
165
Modeling and decoding motor cortical activity using a switching Kalman filter
166
Modeling and deformation analyzing of InSb focal plane arrays detector under thermal shock
167
Modeling and deformation characteristics of a circular beam with asymmetric piezoelectric actuators
168
Modeling and design considerations of a photovoltaic energy source feeding a synchronous reluctance motor suitable for pumping systems
169
Modeling and design for electrical performance of wideband flip-chip transition
170
Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini)
171
Modeling and Design of a DiskType Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini)
172
Modeling and design of a fully integrated gas analyzer using a μGC and NEMS sensors
173
Modeling and design of a solar thermal system for hybrid cooking application
174
Modeling and Design of Controllers for Switched Reluctance Motor Based on Asymmetrical -Source Inverters
175
Modeling and Design of DC Boost and AC Side Voltage Controllers in Asymmetrical ?-Source Inverter.
176
Modeling and design of global logistics systems: A review of integrated strategic and tactical models and design algorithms
177
Modeling and design of hydrogen gas sensors based on a membrane-supported surface plasmon waveguide
178
Modeling and design of multi-layered and graded materials
179
Modeling and design of phase shift anti-islanding method using non-detection zone
180
Modeling and design of tape transport mechanism Original Research Article
181
MODELING AND DESIGN OF THERMAL POWER PLANTS USING CONCENTRATED SOLAR POWER SYSTEMS
182
Modeling and design of ultraviolet reactors for disinfection by-product precursor removal Original Research Article
183
Modeling and designing heating and ventilation system with underfloor air distribution
184
Modeling and Designing Indices of Talent Identification in the Field of Basketball Based on Physical‑Motor, Psychological, Anthropometric, and Physiological Parameters
185
Modeling and detecting the stator winding fault of permanent magnet synchronous motors
186
Modeling and detection of damage using smeared crack model
187
Modeling and detection of demagnetization fault in permanent magnet vernier machine using flexible magnetic equivalent circuit method
188
Modeling and determination of heat transfer coefficient in a basin solar still using CFD Original Research Article
189
Modeling and determination of relationship between kernel yield and its related traits in maize inbred lines and their hybrids using multiple regression and path coefficient analysis
190
Modeling and development of a decision support system for supplier selection in the process industry
191
Modeling and development of an ANN-based smart pressure sensor in a dynamic environment
192
Modeling and development of an ANN-based smart pressure sensor in a dynamic environment
193
Modeling and direct simulation of near-field granular flows
194
Modeling and discretization errors in hyperelasto-(visco-)plasticity with a view to hierarchical modeling Original Research Article
195
Modeling and discretization errors in large eddy simulations of hydrodynamic and magnetohydrodynamic channel flows
196
Modeling and distributed gain scheduling strategy for load frequency control in smart grids with communication topology changes
197
Modeling and dose calculations of a pure beta emitting 32P coated stent for intracoronary brachytherapy by Monte Carlo code
198
Modeling and dynamic analysis of a planetary mechanism with an elastic belt
199
Modeling and dynamic assessment of urban economy–resource–environment system with a coupled system dynamics – geographic information system model
200
Modeling and dynamic characteristics analysis on a three-stage fast-response and large-flow directional valve
201
Modeling and dynamic characteristics of spinning Rayleigh beams
202
Modeling and dynamic characteristics of spinning Rayleigh beams
203
Modeling and dynamic control simulation of unitary gas engine heat pump
204
Modeling and Dynamic Properties of a Four-Parameter Zener Model Vibration Isolator
205
Modeling and dynamic simulation of ultraviolet induced growing interfaces
206
Modeling and dynamic simulation of ultraviolet induced growing interfaces
207
Modeling and dynamical analysis of a COVID-19 epidemic model with time-delay
208
Modeling and dynamics analysis of shells of revolution by partially active constrained layer damping treatment
209
Modeling and dynamics of an autothermal JP5 fuel reformer for marine fuel cell applications
210
Modeling and Economic Analysis of MED-TVC Desalination with Allam Power Plant Cycle in Kish Island
211
Modeling and economic evaluation of the integration of carbon capture and storage technologies into coal to liquids plants
212
Modeling and effect of leakages on heat transfer performance of fixed matrix regenerators
213
Modeling and Efficient Control of Microturbine Generation System With Battery Energy Storage for Sensitive Loads
214
Modeling and efficient optimization for object-based scalability and some related problems
215
Modeling and Elimination of Atenolol on Granular Activated Carbon in Fixed Bed Column
216
Modeling and energy efficiency optimization of belt conveyors
217
Modeling and environmental risk assessment of Eastern Alborz Coal washing plant
218
Modeling and Estimating the COVID-19 Incidence and Fatality in Europe
219
Modeling and estimating the jump risk of exchange rates: Applications to RMB
220
Modeling and estimation of ambiguities in linear arrays
221
Modeling and Estimation of Banana Slice Browning during Drying using Artificial Neural Network.
222
Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite
223
Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite
224
Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite
225
Modeling and estimation of rheological properties of food products for manufacturing simulations Original Research Article
226
Modeling and estimation of the cardiac electromechanical activity
227
Modeling and estimation of the natural gas consumption for residential and commercial sectors in Iran
228
Modeling and Estimation Problems for Structured Heterogeneous Populations
229
Modeling and evaluating ecosystem in 1980s and 1990s for American lobster (Homarus americanus) in the Gulf of Maine
230
Modeling and evaluating ecosystem in 1980s and 1990s for American lobster (Homarus americanus) in the Gulf of Maine
231
Modeling and evaluating of typical advanced peer-to-peer botnet
232
Modeling and evaluating the ecosystem of sea-grass beds, shallow waters without sea-grass, and an oxygen-depleted offshore area
233
Modeling and evaluating the effect of forest fire control on the CO2 cycle in Siberia
234
Modeling and Evaluating the Energy Hub Effects on a Price Responsive Load
235
Modeling and evaluating the security threats of transient errors in firewall software
236
Modeling and evaluating the strategic effects of improvement programs on the manufacturing performance using neural networks
237
Modeling and Evaluation of a Policy Provisioning Architecture for Mobile Ad-Hoc Networks
238
Modeling and evaluation of boundary layer resistance at feed in the permeation of VOC/N2 mixtures through PDMS membrane
239
Modeling and evaluation of curved layer fused deposition
240
Modeling and evaluation of information systems using coloured petri network
241
Modeling and Evaluation of Stochastic Discrete-Event Systems with RayLang Formalism
242
Modeling and evaluation of the environmental consequences of fire in atmospheric storage tanks using PHAST software
243
Modeling and evaluation of the filling stage of injection/compression moulding
244
Modeling and evaluation of the filling stage of injection/compression moulding
245
Modeling and evaluation of the indoor power line transmission medium
246
Modeling and evaluation of trust with an extension in semantic web
247
Modeling and Evaluation of Web Services in Mobile Networks Using Stochastic Colored Petri Nets
248
Modeling and Evolutionary Optimization on Multilevel Production Scheduling: A Case Study
249
Modeling and experiment of shuttling speed effects on the OSTRYCH
250
Modeling and experimental analysis of a self-excited six-phase induction generator for stand-alone renewable energy generation
251
Modeling and experimental analysis of polydispersed particles coating in spouted bed
252
Modeling and experimental assessment of Nafion membrane properties used in SO2 depolarized water electrolysis for hydrogen production
253
Modeling and experimental characterization of peak tailing in DNA gel electrophoresis
254
Modeling and Experimental Design for Metabolic Flux Analysis of Lysine-Producing Corynebacteria by Mass Spectrometry
255
Modeling and experimental evaluation of an automotive air conditioning system with a variable capacity compressor
256
Modeling and Experimental Investigation a Solar Tray Dryer with Indirect Forced Convection using Phase Change Materials
257
Modeling and Experimental Investigation of a Variable Speed Drive Water Source Heat Pump
258
Modeling and experimental investigation of accumulators for automotive air conditioning systems
259
Modeling and Experimental Investigation of Laser Drilling with Jet Electrochemical Machining
260
Modeling and experimental investigation of looped separate heat pipe as waste heat recovery facility
261
Modeling and experimental investigation on water-driven steam injector for waste heat recovery
262
Modeling and experimental observation of evaporation from oxidizing molybdenum particles entrained in a thermal plasma jet
263
Modeling and Experimental Prediction of Wastewater Treatment Efficiency in Oil Refineries Using Activated Sludge Process
264
Modeling and Experimental Studies on Pre-Loaded Reinforced Concrete Beams Strengthened by External Reinforcement
265
Modeling and experimental studies on single particle coal devolatilization and residual char combustion in fluidized bed
266
Modeling and experimental study of birefringence in injection molding of semicrystalline polymers
267
Modeling and experimental study of CO2 absorption in a hollow fiber membrane contactor
268
Modeling and experimental study of grinding forces in surface grinding
269
Modeling and experimental study of microfiltration using a composite module
270
Modeling and experimental study of nucleate boiling on a vertical array of horizontal plain tubes
271
Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process
272
Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing
273
Modeling and experimental study of the 27-day variation of galactic cosmic-ray intensity for a solar wind velocity depending on heliolongitude Original Research Article
274
Modeling and experimental study of vapor phase-diffusion driven sessile drop evaporation
275
Modeling and experimental study on an innovative passive cooling system—NVP system
276
Modeling and experimental study on multi-level humidifying of the underfeed circulating spouted bed for flue gas desulfurization
277
Modeling and experimental study on performance of inverter air conditioner with variation of capillary tube using R-22 and R-407C
278
Modeling and experimental study on sensing response of an AlGaN/GaN HEMT-based hydrogen sensor
279
Modeling and experimental study on the performance of an inverter air conditioner using R-410A with evaporatively cooled condenser
280
Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells
281
Modeling and Experimental Testing of Asymmetric Information Problems in Lease and Hire Contracts: A Study Based on Contract Theory
282
Modeling and experimental testing of the effect of solvent absorption on the electric properties of styrene butadiene rubber/carbon black chemical sensors
283
Modeling and Experimental Validation for Hammer-Driven Type Penetrators under Horizontal Condition
284
Modeling and experimental validation of a 1.2 MW DC transferred well-type plasma torch Original Research Article
285
Modeling and experimental validation of a greenhouse with evaporative cooling by moving water film over external shade cloth
286
Modeling and experimental validation of H2 gas bubble humidifier for a 50 kW stationary PEMFC system
287
Modeling and experimental validation of internal faults in salient pole synchronous machines including space harmonics Original Research Article
288
Modeling and experimental validation of mass transfer from carbonated beverages in polyethylene terephthalate bottles Original Research Article
289
Modeling and experimental validation of overpotentials of a direct ethanol fuel cell
290
Modeling and experimental validation of sharpening mechanism based on thermal oxidation for fabrication of ultra-sharp silicon nanotips
291
Modeling and experimental validation of solid oxide fuel cell materials and stacks
292
Modeling and experimental validation of the desiccant wheel in a hybrid desiccant air conditioning system
293
Modeling and experimental validation of the dispersion of 222Rn released from a uranium mine ventilation shaft
294
Modeling and experimental validation of the solar loop for absorption solar cooling system using double-glazed collectors
295
Modeling and experimental validation of trabecular bone damage, softening and densification under large compressive strains
296
Modeling and experimental validation of unsteady impinging flames
297
Modeling and experimental verification of dielectric constants for three-dimensional woven composites
298
Modeling and Experimental Verification of Grid Interaction of a DFIG Wind Turbine
299
Modeling and experimental verification of martensitic transformation plastic behavior in carbon steel for quenching process
300
Modeling and experimental verification of partial slip for multiple frictional contact problems
301
Modeling and experimental verification of simultaneous tension and torsion in a cylindrical element with a surface layer
302
Modeling and experimental verification of the 300 mm Ar anneal process
303
Modeling and experimental verification of the kinetics of reacting polymer systems
304
Modeling and experimental verification of the performance of TIRF-sensing systems for oligonucleotide microarrays based on bulk and integrated optical planar waveguides
305
Modeling and experimental verification of thermo-mechanical coupled behavior of face-centered-cubic polycrystals
306
MODELING AND EXPERIMENTAL WORK OF LECTROCHEMICAL TURNING PROCESS
307
Modeling and experimenting combined smart sleep and power scaling algorithms in energy-aware data center networks
308
Modeling and experiments in plasticity
309
Modeling and experiments on energy loss in horizontal connecting pipe of vertical ground source heat pump system
310
Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy
311
Modeling and experiments on the influence of biofilm size and mass transfer in a fluidized bed reactor for anaerobic digestion
312
MODELING AND EXPERT EVALUATION OF SHAPING DURING ROLLING OF A WIDE RANGE OF ALLOY STEELS
313
Modeling and Exploring Multivariate Spatial Variation: A Test Procedure for Isotropy of Multivariate Spatial Data
314
Modeling and fabrication of micro tools by pulsed electrochemical machining
315
Modeling and fault diagnosis of a photovoltaic system
316
Modeling and FE analysis of column to beam end-plate bolted connection
317
Modeling and Finite Difference Numerical Analysis of Reaction-Diffusion Dynamics in a Microreactor
318
Modeling and finite element analysis on GTAW arc and weld pool
319
Modeling and flowsheet simulation of continuous fluidized bed dryers
320
Modeling and forecasting cointegrated relationships among heavy oil and product prices
321
Modeling and forecasting crude oil markets using ARCH-type models
322
Modeling and Forecasting Electricity Prices with Input/Output Hidden Markov Models .
323
Modeling and forecasting extreme hot events in the central Ebro valley, a continental-Mediterranean area
324
Modeling and forecasting from trend-stationary long memory models with applications to climatology
325
Modeling and forecasting industrial end-use natural gas consumption
326
Modeling and forecasting MODIS-based Fire Potential Index on a pixel basis using time series models
327
Modeling and forecasting monthly movement of annual average solar insolation based on the least-squares Fourier-model
328
Modeling and forecasting natural gas demand in Bangladesh
329
Modeling and Forecasting of Bohai Sea Ice
330
Modeling and forecasting of electrical power demands for capacity planning
331
MODELING AND FORECASTING OF ENERGY SCENARIO IN PAKISTAN WITH APPLICATION OF DECENTRALIZED ENERGY PLANNING
332
Modeling and Forecasting of Food Imports in Albania
333
Modeling and Forecasting of Paraffin Settings on an Existing Extractive Fund of Oil Deposits
334
Modeling and forecasting of Turkey’s energy consumption using socio-economic and demographic variables
335
Modeling and forecasting petroleum futures volatility
336
Modeling and Forecasting Primary Commodity Prices, W. Labys. Ashgate Publishing Co., Burlington VT (2006). US $99.95, 235pp., ISBN-13 978-0-7546-4629-7.
337
Modeling and forecasting river flow rate from the Melen Watershed, Turkey
338
Modeling and Forecasting the Electricity Price in Iran Using Wavelet-based GARCH Model
339
Modeling and forecasting tourism demand for arrivals with stochastic nonstationary seasonality and intervention
340
Modeling and forecasting tourist traffic in the Maua and Alba Posse Harbors
341
Modeling and forecasting trend of COVID-19 epidemic in Iran until May 13, 2020
342
Modeling and forecasting U.S. Patent application filings
343
Modeling and forecasting US presidential election using learning algorithms
344
Modeling and Forecasting Volatility of the Malaysian and the Singaporean Stock Indices using Asymmetric GARCH Models and Non-normal Densities
345
Modeling and Formal Verification of IMPP
346
Modeling and Fuzzy Control Strategy Design for the Hydraulic Hybrid Refuse Truck
347
Modeling and generating context-aware agent-based applications with amended colored Petri nets
348
Modeling and generating parallel flexure elements
349
Modeling and generating realistic streaming media server workloads
350
Modeling and genetic algorithm-based multi-objective optimization of the MED-TVC desalination system Original Research Article
351
Modeling and H/sub (infinity)/ control for switched linear parameter-varying missile autopilot
352
Modeling and harmonic suppression for power distribution systems
353
Modeling and heuristics for scheduling of distributed job shops
354
Modeling and Hierarchical Neuro-Fuzzy Control for Flexure-Based Micropositioning Systems
355
Modeling and high-precision control of a ball-screw-driven stage
356
Modeling and Hybrid Pareto Optimization of Cyclone Separators Using Group Method of Data Handling (GMDH) and Particle Swarm Optimization (PSO)
357
Modeling and Identification Based On CAN Network Information in Iranian Cars
358
Modeling and identification of an arbitrarily shaped scatterer using dynamic XFEM with cubic splines
359
Modeling and identification of an electromechanical internal combustion engine throttle body
360
Modeling and identification of an electro-mechanical system: The LISA grabbing positioning and release mechanism case Original Research Article
361
Modeling and identification of an electrostatic motor
362
Modeling and Identification of an Industrial Robot for Machining Applications
363
Modeling and identification of freeplay nonlinearity
364
Modeling and identification of frictional forces at a contact interface experiencing micro-vibro-impacts
365
Modeling and identification of induction micromachines in microelectromechanical systems applications
366
Modeling and identification of solar energy water heating system incorporating nonlinearities
367
Modeling and identification of systems with backlash
368
Modeling and identification of Wiener systems with two-segment nonlinearities
369
Modeling and impact of metal accumulation in bottom sediments of wet ponds
370
Modeling and implementation of an artificial electricity market using agent-based technology
371
Modeling and implementation of the vegetable supply chain traceability system
372
Modeling and implementing a real-time scheduler for dual-armed cluster tools
373
Modeling and implementing an agent-based environmental health impact decision support system
374
Modeling and implementing an agent-based system for prediction of protein relative solvent accessibility
375
Modeling and imprint fabrication of an infrared wire-grid polarizer with an antireflection grating structure
376
Modeling and Improvement of Function of Solar Resources using Comparative Multipurpose Algorithm of PSO
377
Modeling and improvement of silicon ingot directional solidification for industrial production systems
378
Modeling and in situ identification of material parameters for layered structures based on carbon nanotube arrays
379
Modeling and inference for troubleshooting with interventions applied to a heavy truck auxiliary braking system
380
Modeling and inference for troubleshooting with interventions applied to a heavy truck auxiliary braking system
381
Modeling and Inferential Thoughts for Consecutive Gap Times Observed with Death and Censoring
382
Modeling and initial assessment of the inter-frequency clock bias for COMPASS GEO satellites Original Research Article
383
Modeling and Intelligent Control of a Robotic Gas Metal Arc Welding System
384
Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles
385
Modeling and intellligent chatter control strategies for a lathe machine
386
Modeling and interactions analysis of the novel antagonist agent flibanserin with 5-hydroxytryptamine 2A (5-HT2A) serotonin receptor as a HSDD treatment in premenopausal women
387
Modeling and interactions analysis of the novel antagonist agent flibanserin with 5-hydroxytryptamine 2A (5-HT2A) serotonin receptor as a HSDD treatment in premenopausal women
388
Modeling and interactions of Aspergillus fumigatus lanosterol 14-α demethylase `Aʹ with azole antifungals Original Research Article
389
Modeling and interpretations by the statistical physics formalism of hydrogen adsorption isotherm on LaNi4.75Fe0.25
390
Modeling and interpreting bioavailability of organic contaminant mixtures in subsurface environments Review Article
391
Modeling and interpreting the seismic-reflection expression of sandstone in an ancient mass-transport deposit dominated deep-water slope environment
392
Modeling and inverse simulation of somersaults on the trampoline
393
Modeling and Investigating Lightning Wave Transfer through Distribution Transformer to Watercraft Power System
394
Modeling and Investigating the Production of Carbon Dioxide Gas Using HSC Software in the Tile Industry
395
Modeling and Investigation of Gas Turbines Heat Recovery in the Semnan Oil Pumping Station for Heating Gas-Oil to Reduce Energy Consumption of Pumping
396
Modeling and investigation of Gulf El-Zayt wind farm for stability studying during extreme gust wind occurrence
397
Modeling and investigation of neural activity in the thalamus
398
Modeling and investigation of submerged fermentation process to produce extracellular polysaccharide using Lactobacillus confusus
399
Modeling and investigation of the channeling phenomenon in downdraft stratified gasifers
400
Modeling and investigation of the wind resource in the gulf of Tunis, Tunisia
401
Modeling and investigation start-up procedures of a combined cycle power plant
402
Modeling and investigation start-up procedures of a combined cycle power plant
403
Modeling and IPC control of interactive mechanical systems: a coordinate-free approach: Stefano Stramigioli; LNCIS 266, Springer, London, 2001, ISBN 1-85233-395-2
404
Modeling and Kinetic Determination in Affinity Precipitation of Trypsin
405
MODELING AND LAYOUT OPTIMIZATION TECHNIQUES FOR SILICON-BASED SYMMETRICAL SPIRAL INDUCTORS
406
Modeling and limits of strength of nanoporous foams
407
Modeling and linguistic knowledge extraction from systems using fuzzy relational models
408
Modeling and machining evaluation of microstructure fabrication by fast tool servo-based diamond machining
409
Modeling and magnetic measurements of TNK synchrotron radiation source magnets
410
Modeling and magnetic measurements of TNK synchrotron radiation source magnets
411
Modeling and Management of Urban Stormwater Runoff Quality: A Review
412
Modeling and managing the evolutionary component of biological systems
413
Modeling and managing the evolutionary component of biological systems
414
Modeling and managing the interactions between hydrology, ecology and economics
415
Modeling and manipulating the structure of hierarchical schemas for the web
416
Modeling and measurement approaches for electrostatic discharge in semiconductor devices and ICs: an overview
417
Modeling and measurement approaches for electrostatic discharge in semiconductor devices and ICs: an overview
418
Modeling and measurement issues have been considered the heart of information technology (IT) productivity paradox problem. By collecting data from seven mortgage firms, this research attempts to shed light on the causal relationships and complementarity
419
Modeling and measurement methodology in consumer perceptions, preference, consideration, and choice behavior
420
Modeling and measurement of aerosol deposition on a heated substrate
421
Modeling and measurement of CO2 solubility in salty aqueous solutions and application in the Erdos Basin
422
Modeling and measurement of flow effects on tracheal sounds
423
Modeling and measurement of granule attrition during pneumatic conveying in a laboratory scale system
424
Modeling and measurement of interfacial area concentration in two-phase flow Original Research Article
425
Modeling and measurement of temperature sensitivity in birefringent photonic crystal holey fibers
426
Modeling and measurement of the wavelength-dependent output properties of quantum-well optical amplifiers: effects of a carrier-dependent escape time
427
Modeling and measurements of a 16-kW turbulent nonadiabatic syngas diffusion flame in a cooled cylindrical combustion chamber
428
Modeling and measurements of solid–liquid and vapor–liquid equilibria of polyols and carbohydrates in aqueous solution Original Research Article
429
Modeling and measurements of soot and species in a laminar diffusion flame
430
Modeling and measurements of the radiative characteristics of high-power (alpha)-DFB lasers
431
Modeling and measurements of water–vapor flow and icing at low pressures with application to pharmaceutical freeze-drying
432
Modeling and measuring double-frequency jitter in one-way master–slave networks
433
Modeling and measuring product development cycle time across industries
434
Modeling and Measuring Productivity in the Agri-Food Sector: Trends, Causes
435
Modeling and measuring the effects of disturbance history and climate on carbon and water budgets in evergreen needleleaf forests
436
Modeling and measuring the effects of imprecision in accident management
437
Modeling and measuring the indoor radon concentrations in high-rise buildings in Hong Kong
438
Modeling and measuring the spatial relation “along”: Regions, contours and fuzzy sets
439
Modeling and mechanical performance of carbon nanotube/epoxy resin composites
440
Modeling and mechanism of the adsorption of copper ion onto natural bamboo sawdust
441
Modeling and mechanism of the adsorption of proton onto natural bamboo sawdust
442
Modeling and microstructural analysis of temperature effects in fused silica viewport
443
Modeling and microstructural characterization of incubation, time-dependent drift and saturation during electromigration in AI-Si-Cu stripes
444
Modeling and microstructural characterization of incubation, time-dependent drift and saturation during electromigration in AI-Si-Cu stripes
445
Modeling and Minimization of Extinction in Volterra–Lotka Type Equations with Free Boundaries
446
Modeling and minimizing process time of combined convective and vacuum drying of mushrooms and parsley Original Research Article
447
Modeling and mining of dynamic trust in complex service-oriented systems
448
Modeling and mitigation of pad scratching in chemical–mechanical polishing
449
Modeling and Model Predictive Control of Composition and Conversion in an ETBE Reactive Distillation Column
450
Modeling and modification of the parallel plate variable MEMS capacitors considering deformation issue
451
Modeling and monitoring for handling nonlinear dynamic processes
452
Modeling and monitoring of construction supply chains
453
Modeling and monitoring of E-commerce workflows
454
Modeling and monitoring of long-term acidification in an upland catchment of the Western Ore Mountains, SE Germany
455
Modeling and monitoring of suspended particulate matter from Badarpur thermal power station, Delhi
456
Modeling and monitoring of the acclimatization of conventional activated sludge to a biohydrogen producing culture by biokinetic control
457
Modeling and Monitoring Social Ntwork in term of Longitudinal Data
458
Modeling and Monitoring Social Ntwork in term of Longitudinal Data
459
Modeling and Monte Carlo simulation of TCDD transport in a river
460
MODELING AND MULTI-OBJECTIVE DESIGN OPTIMIZATION OF QUASI-CONTINUOUS HIGH MAGNETIC FIELD SYSTEMS
461
Modeling and multi-objective exergy based optimization of a combined cycle power plant using a genetic algorithm
462
Modeling and multi-objective optimization of low-frequency vibration-assisted chemical machining using central composite design in response surface methodology
463
Modeling and Multi-Objective Optimization of Operating Parameters in Semi Autogenous Grinding Mill
464
Modeling and multi-objective optimization of parallel flow condenser using evolutionary algorithm
465
MODELING AND MULTI-OBJECTIVE OPTIMIZATION OF STALL CONTROL ON NACA0015 AIRFOIL WITH A SYNTHETIC JET USING GMDH TYPE NEURAL NETWORKS AND GENETIC ALGORITHMS
466
Modeling and multi-response optimization of Inconel 718 on machining of CNC WEDM process
467
Modeling and multivariable active disturbance rejection control of a hydraulic looper multivariable system
468
Modeling and Neuro-fuzzy Controller Design of a Wind Turbine in Full-load Region Based on Operational Data
469
Modeling and nonlinear control of magnetic levitation systems
470
Modeling and nonlinear hunting stability analysis of high-speed railway vehicle moving on curved tracks
471
Modeling and nonlinear parameter estimation with Kronecker product representation for coupled oscillators and spatiotemporal systems
472
Modeling and Non-modeling Genre-based Approach to Writing Argument-led Introduction Paragraphs: A Case of English Students in Iran
473
Modeling and Numerical Analysis in 3D of Anisotropic and Nonlinear Mechanical Behavior of Tournemire Argillite under High Temperatures and Dynamic Loading
474
Modeling and numerical analysis of counter-current dialyzer at steady state
475
Modeling and numerical analysis of fractional-order Bloch equations
476
Modeling and numerical analysis of granite rock specimen under mechanical loading and fire
477
Modeling and Numerical Analysis of Revenue Sharing Contract Based on the Stackelberge Game Theory
478
Modeling and numerical approximation of a 2.5D set of equations for mesoscale atmospheric processes
479
Modeling and numerical investigation of erosion rate for turbulent two-phase gas–solid flow in horizontal pipes
480
Modeling and numerical issues in hyperelasto-plasticity with anisotropy
481
Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm
482
Modeling and Numerical Simulation of a Brushless Permanent-Magnet DC Motor in Dynamic Conditions by Time-Stepping Technique
483
Modeling and numerical simulation of bioheat transfer and biomechanics in soft tissue
484
Modeling and numerical simulation of biotin carboxylase kinetics: Implications for half-sites reactivity
485
Modeling and numerical simulation of linear and nonlinear spacecraft attitude dynamics and gravity gradient moments: A comparative study
486
Modeling and numerical simulation of oscillatory two-phase flows, with application to boiling water nuclear reactors Original Research Article
487
Modeling and numerical simulation of particulate flows by the Eulerian–Lagrangian approach
488
Modeling and numerical simulation of residual stresses and birefringence in injection molded center-gated disks
489
Modeling and numerical simulation of solar chimney power plants
490
Modeling and numerical simulation of the mechanical behavior of woven SiC/SiC regarding a three-dimensional unit cell
491
Modeling and Numerical Solution of the Fate of Multi-component Substrate in Porous Media
492
Modeling and numerical study of actuator and sensor effects for a laminated piezoelectric plate
493
Modeling and numerical treatment of elastic rods with frictionless self-contact
494
Modeling and observations of the north–south ionospheric asymmetry at low latitudes at long deep solar minimum Original Research Article
495
Modeling and online parameter estimation of intake manifold in gasoline engines using sliding mode observer
496
Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor
497
Modeling and Optimal Active Control with Delay of the Dynamics of a Strongly Nonlinear Beam
498
Modeling and Optimal Control of 4 Wheel Steering Vehicle Using LQR and its Comparison with 2 Wheel Steering Vehicle
499
Modeling and Optimal Control of a 3-Axis Motion Simulator
500
Modeling and optimal control of a nonlinear dynamical system in microbial fed-batch fermentation
501
Modeling and Optimal Control of a Sport Utility Cable Suspended Robot
502
Modeling and Optimal Control of Batch Processes Using Recurrent Neuro-Fuzzy Networks
503
Modeling and optimal controllers design for a stand-alone photovoltaic-diesel generating unit
504
Modeling and Optimal Design of 3 Degrees of Freedom Helmholtz Resonator in Hydraulic System
505
Modeling and optimal design of cyclic processes for hydrogen purification using hydride-forming metals
506
Modeling and optimal design of evaporative cooling system in controlled environment greenhouse
507
Modeling and optimal design of ground air collector for heating in controlled environment greenhouse
508
Modeling and Optimization for Disassembly Planning
509
Modeling and optimization for microstructural properties of Al/SiC nanocomposite by artificial neural network and genetic algorithm
510
Modeling and Optimization for Piercing Energy Consumption Original Research Article
511
Modeling and optimization for the secondary reaction of FCC gasoline based on the fuzzy neural network and genetic algorithm
512
Modeling and optimization I: Usability of response surface methodology Original Research Article
513
Modeling and optimization II: Comparison of estimation capabilities of response surface methodology with artificial neural networks in a biochemical reaction Original Research Article
514
Modeling and optimization III: Reaction rate estimation using artificial neural network (ANN) without a kinetic model Original Research Article
515
Modeling and Optimization in Early Detection Programs with a Single Exam
516
Modeling and Optimization in VSC-HVDC Transmission Lines in Chemical Industry, A review
517
Modeling and optimization IV: Investigation of reaction kinetics and kinetic constants using a program in which artificial neural network (ANN) was integrated Original Research Article
518
Modeling and optimization of a 1 kWe HT-PEMFC-based micro-CHP residential system
519
Modeling and optimization of a fluidized catalytic cracking process under full and partial combustion modes
520
Modeling and optimization of a hybrid system for the energy supply of a “Green” building
521
Modeling and optimization of a multi-product biosynthesis factory for multiple objectives
522
Modeling and optimization of a non-isothermal two phase flow in the cathode gas diffusion layer of PEM fuel cell
523
Modeling and optimization of a nuclear power plant secondary loop Original Research Article
524
Modeling and optimization of a propeller-type tribocharger for granular materials
525
Modeling and Optimization of a Semi Regenerative Catalytic Reforming of Naphtha in the Presence of Catalyst Coking
526
Modeling and optimization of a sequence of chemical cleaning cycles in dead-end ultrafiltration
527
Modeling and optimization of a solar assisted heat pump using ice slurry as a latent storage material
528
Modeling and optimization of a thermoplastic composites stamping process
529
Modeling and Optimization of a Tri-objective Transportation-Location-Routing Problem considering route reliability: using MOGWO, MOPSO, MOWCA, and NSGA-II
530
Modeling and Optimization of Aloe-Vera Static Shearing by Response Surface Methodology (RSM) and Artificial Neural Network (ANN) Methods
531
Modeling and optimization of an energy generation island based on renewable technologies and hydrogen storage systems
532
Modeling and optimization of an industrial hydrocracker plant
533
Modeling and optimization of an industrial hydrocracking unit to improve the yield of diesel or kerosene
534
Modeling and optimization of an oversaturated signalized network
535
Modeling and Optimization of Anethole Ultrasound-Assisted Extraction from Fennel Seeds using Artificial Neural Network
536
Modeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology Document Type : Original Research Paper
537
Modeling and Optimization of B-Cyclodextrin Production by Bacillus
538
Modeling and optimization of catalytic partial oxidation methane reforming for fuel cells
539
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach
540
Modeling and Optimization of Colloidal Nanosilver Pretreatment on Acid-Free Dyeing, Antibacterial, and Hydrophilicity of Polyamide-6,6 Using Response Surface Methodology
541
Modeling and optimization of combined cytostatic and cytotoxic cancer chemotherapy
542
Modeling and optimization of cross-flow ultrafiltration using hybrid neural network-genetic algorithm approach
543
Modeling and optimization of degree of folate grafted on chitosan and carboxymethyl-chitosan
544
Modeling and optimization of designing parameters for a parallel-plain fin heat sink with confined impinging jet using the response surface methodology
545
Modeling and Optimization of Diesel-Natural Gas RCCI Engine Performance, Combustion Noise and Emissions using Response Surface Method
546
Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm
547
Modeling and Optimization of Electrocoagulation Processfor the Removal of Yellow145 dye Based on CentralComposite Design
548
Modeling and optimization of electron linac exit systems for nuclear technologies
549
Modeling and optimization of electron linac exit systems for nuclear technologies
550
Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer
551
Modeling and Optimization of Energy Inputs and Greenhouse Gas Emissions for Eggplant Production Using Artificial Neural Network and MultiObjective Genetic Algorithm
552
Modeling and optimization of existing beam port facility of PSBR
553
Modeling and optimization of fermentative hydrogen production
554
Modeling and optimization of Fischer–Tropsch products hydrocracking
555
Modeling and optimization of Fischer–Tropsch synthesis in the presence of Co (III)/Al2O3 catalyst using artificial neural networks and genetic algorithm
556
Modeling and Optimization of Fixed-Bed Fischer-Tropsch Synthesis Using Genetic Algorithm
557
Modeling and Optimization of Flux Assisted Tungsten Inert Gas Welding Process Using Taguchi Method and Statistical Analysis
558
Modeling and optimization of foam-filled thin-walled columns for crashworthiness designs
559
Modeling and optimization of friction stir welding parameters in joining 5086 H32 aluminium alloy.
560
Modeling and optimization of high chromium alloy wear in phosphate laboratory grinding mill with fuzzy logic and particle swarm optimization technique
561
Modeling and optimization of hollow fiber DCMD module for desalination
562
Modeling and optimization of HVAC energy consumption
563
Modeling and Optimization of Hybrid HIR Drying Variables for Processing of Parboiled Paddy Using Response Surface Methodology
564
Modeling and optimization of hybrid solar thermoelectric systems with thermosyphons
565
Modeling and optimization of hybrid wind–solar-powered reverse osmosis water desalination system in Saudi Arabia
566
Modeling and optimizatıon of hydrocyclone processıng of low grade bentonites
567
Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions
568
Modeling and optimization of InGaAs infrared photovoltaic detectors
569
Modeling and optimization of InGaAs infrared photovoltaic detectors
570
Modeling and optimization of ITO/Al/ITO multilayer films characteristics using neural network and genetic algorithm
571
Modeling and optimization of laser direct structuring process using artificial neural network and response surface methodology
572
Modeling and optimization of lipase-catalyzed synthesis of phytosteryl esters of oleic acid by response surface methodology
573
Modeling and Optimization of Mass and Spring Based Vibration String Using Modal Analysis and Imperialist Competition Optimization Algorithm Methods
574
Modeling and optimization of mechanical behavior of bonded composite–steel single lap joints by response surface methodology
575
Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design
576
Modeling and optimization of membrane lifetime in dead-end ultra filtration
577
Modeling and optimization of microwave devices and circuits using genetic algorithms
578
Modeling and optimization of Multi-Gravity Separator to produce celestite concentrate
579
Modeling and optimization of multi-tubular metal hydride beds for efficient hydrogen storage
580
Modeling and Optimization of Nano-bubble Generation Process Using Response Surface Methodology
581
Modeling and optimization of Nitrate and total Iron removal from wastewater by TiO2/SiO2 nanocomposites
582
Modeling and optimization of oil refinery wastewater chemical oxygen demand removal in dissolved air flotation system by response surface methodology
583
Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken design
584
Modeling and optimization of photocatalytic/photoassisted-electro-Fenton like degradation of phenol using a neural network coupled with genetic algorithm
585
Modeling and optimization of polygeneration energy systems
586
Modeling and Optimization of Precipitation Hardening Heat Treatment Factors of the Al2024 Alloy Using a Two-Level Full Factorial Design
587
Modeling and optimization of preparative reversed-phase liquid chromatography for insulin purification
588
MODELING AND OPTIMIZATION OF PROCESS PARAMETERS USING NEURAL NETWORKS AND SIMULATED ANNEALING ALGORITHM FOR ELECTRICAL DISCHARGE MACHINING OF AISI2312 HOT WORKED STEEL
589
Modeling and Optimization of Product Appearance: Application to Injection-Molded Plastic Panels
590
Modeling and optimization of Q-switched double-clad fiber lasers
591
Modeling and optimization of resonant cavity enhanced-separated absorption graded charge multiplication-avalanche photodetector (RCE-SAGCM-APD)
592
Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm
593
Modeling and optimization of short Er/sup 3+/-Yb/sup 3+/ codoped fiber lasers
594
Modeling and optimization of solar thermoelectric generators for terrestrial applications
595
Modeling and optimization of spiral concentrator for separation of ultrafine chromite
596
Modeling and optimization of stencil printing operations: A comparison study
597
Modeling and optimization of supercritical fluid processes
598
Modeling and optimization of surface quality of copper deposits recovered from brass scrap by direct electrowinning
599
Modeling and Optimization of Surface Roughness of AISI2312 Hot Worked Steel in EDM based on Mathematical Modeling and Genetic Algorithm
600
Modeling and optimization of sweeping gas membrane distillation Original Research Article
601
Modeling and optimization of synergistic effect of Cyanex 302 and D2EHPA on separation of zinc and manganese
602
Modeling and optimization of the air system in polymer exchange membrane fuel cell systems
603
Modeling and optimization of the bi-substrate peroxidase-enzyme catalyzed potentiometric assay of hydrogen peroxide by response surface methodology with a central composite rotatable design
604
Modeling and Optimization of the Coagulation–Flocculation Process in Turbidity Removal from Aqueous Solutions Using Rice Starch
605
Modeling and optimization of the combined carbon dioxide reforming and partial oxidation of natural gas Original Research Article
606
Modeling and Optimization of the Condensing Steam Turbine Network of a Chemical Plant
607
Modeling and optimization of the dilute-sulfuric-acid pretreatment of corn stover, poplar and switchgrass
608
Modeling and Optimization of the Drug Extraction Production Process
609
Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm
610
Modeling and Optimization of the Electrochemical Process for Cefixime Removal from Water
611
Modeling and optimization of the growth rate for ZnO thin films using neural networks and genetic algorithms
612
Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method
613
Modeling and optimization of the mixed reforming of methane: Maximizing CO2 utilization for non-equilibrated reaction
614
Modeling and optimization of the molten salt cleaning process
615
Modeling and optimization of the moving granular bed for combined hot gas desulfurization and dust removal
616
Modeling and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts
617
Modeling and optimization of the NOx emission characteristics of a tangentially fired boiler with artificial neural networks
618
Modeling and optimization of the sequential brakeforming processes
619
Modeling and optimization of the supercritical wood impregnation process—Focus on pressure and temperature
620
Modeling and optimization of threading process for shape control in tandem cold rolling
621
Modeling and Optimization of Transmission Schemes in Energy-Constrained Wireless Sensor Networks
622
Modeling and Optimization of Truck-Shovel Allocation to Mining Faces in Cement Quarry
623
Modeling and Optimization of Ultrasound Assisted Osmotic Dehydration of Cranberry Using Response Surface Methodology
624
Modeling and optimization of ultrasound-assisted extraction of polyphenolic compounds from Aronia melanocarpa by-products from filter-tea factory
625
Modeling and optimization of ultrasound-assisted extraction of polyphenolic compounds from Aronia melanocarpa by-products from filter-tea factory
626
Modeling and optimization of ultrasound-assisted extraction of polysaccharide from Cucurbita moschata
627
Modeling and Optimization of Ultrasound-Assisted Osmotic Dehydration with Finished Freeze Drying on Black Cherries – The Effect on Antioxidant Activities
628
Modeling and optimization of variable retort temperature (VRT) thermal processing using coupled neural networks and genetic algorithms Original Research Article
629
Modeling and Optimization of Vehicle Suspension Employing a Nonlinear Fluid Inerter
630
Modeling and optimization of voltage and treatment time for electrocoagulation removal of hexavalent chromium Original Research Article
631
Modeling and Optimization of Wind Turbine Driving Permanent Magnet Synchronous Generator
632
Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation
633
Modeling and optimization of wireless local area network
634
Modeling and optimization of zone-based registration considering cell-by-cell location area for mobile communication networks
635
Modeling and optimization process parameters of acid activation of bentonite by response surface methodology
636
MODELING AND OPTIMIZATION RESEARCH FOR DYNAMIC TRANSMISSION PROCESS OF BALISE TELE-POWERING SIGNAL IN HIGH-SPEED RAILWAYS
637
Modeling and optimization studies for a sequential flow based bio-analytical system
638
Modeling and optimization study by response surface methodology on magnesium ions removal from hard water through a biosorbent
639
Modeling and optimization study of industrial n-type high-efficiency back-contact back-junction silicon solar cells
640
Modeling and Optimization: Isomerization Reaction Rate using Response Surface Methodology with Two Kinetic Model Over Bi-Porous Catalysts
641
Modeling and optimizing a sub-centralized LED lamps provision system for rural communities
642
Modeling and optimizing a vendor managed replenishment system using machine learning and genetic algorithms
643
Modeling and Optimizing Aluminum Hydroxide Precipitation Process in Industrial Scale; case study: Iran Alumina Plant
644
Modeling and optimizing bacterial leaching process parameters to increase copper extraction from a low-grade ore
645
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method
646
Modeling and optimizing irradiance on planar, folded, and honeycomb shapes to maximize photocatalytic air purification
647
Modeling and Optimizing Lead Ions Adsorption by Walnut Shell modified by Sepiolite from Aqueous Solution by Response Surface Methodology
648
Modeling and optimizing of electrochemical oxidation of C.I. Reactive Orange 7 on the Ti/Sb–SnO2 as anode via response surface methodology
649
Modeling and optimizing of factors affecting erosion–corrosion of AA6063–(TiC/Al2O3) hybrid composites by experimental design method
650
Modeling and optimizing of photovoltaic-wind-diesel hybrid systems for electri cation of remote villages in Iran
651
Modeling and optimizing of steam pyrolysis of dimethyl formamide by using response surface methodology coupled with Box-Behnken design
652
Modeling and optimizing of steam pyrolysis of dimethyl formamide by using response surface methodology coupled with Box-Behnken design
653
Modeling and optimizing parabolic trough solar collector systems using the least squares support vector machine method
654
Modeling and optimizing passive valve designs for the implantable Gold Micro-Shunt used in glaucoma treatment
655
Modeling and optimizing Random Walk content discovery protocol over mobile ad-hoc networks
656
Modeling and Optimizing the Charge of Electric Vehicles with Genetic ‎Algorithm in the Presence of Renewable Energy Sources
657
MODELING AND OPTIMIZING THE CORROSIVE WEAR OF STEEL BALLS IN BALL GRINDING MILL
658
Modeling and Optimizing the Costs of Electronic Systems
659
Modeling and Optimizing the Hardness of the Melted Zone in Submerged Arc Welding Process using Taguchi Method
660
Modeling and optimizing the performance of a passive direct methanol fuel cell
661
Modeling and optimizing transportation decisions in a manufacturing supply chain
662
Modeling and optimum design of hybrid solid oxide fuel cell-gas turbine power plants
663
Modeling and output tracking of transverse flux permanent magnet machines using high gain observer and RBF Neural network
664
Modeling and parameter analysis of plasma cleaning
665
Modeling and parameter estimation of two-phase endogenous respirograms and COD measurements during aerobic digestion of biological sludge
666
Modeling and parameter identification of a maltodextrin DE 12 drying process in a convection oven
667
Modeling and parameter identification of granular plastomer conglomerate submitted to internal underpressure
668
Modeling and parameter identification of systems with multisegment piecewise-linear characteristics
669
Modeling and parameter optimization of agile beam radar tracking
670
Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming
671
Modeling and parametric studies for thermal performance of an earth to air heat exchanger integrated with a greenhouse
672
Modeling and parametric studies of the effect of inhomogeneity on fission gas release in LWR MOX fuel
673
Modeling and parametric study of a 1 kWe HT-PEMFC-based residential micro-CHP system
674
Modeling and Pareto optimization of gas cyclone separator performance using RBF type artificial neural networks and genetic algorithms
675
Modeling and passivity analysis of nonholonomic Hamiltonian systems with rheonomous affine constraints
676
Modeling and performance analyses of evaporators in frozen-food supermarket display cabinets at low temperatures
677
Modeling and performance analysis for IPv6 traffic with multiple QoS classes
678
Modeling and performance analysis for security aspects
679
Modeling and performance analysis for wireless mobile networks: a new analytical approach
680
Modeling and performance analysis of a hybrid driver model
681
Modeling and performance analysis of a solar desalination unit with double-glass cover cooling
682
Modeling and performance analysis of a solar desalination unit with double-glass cover cooling Original Research Article
683
Modeling and performance analysis of ad hoc broadcasting schemes
684
Modeling and performance analysis of networking and collaborative systems
685
Modeling and performance analysis of QoS-aware load balancing of Web-server clusters
686
Modeling and performance analysis of realizable optical queue with service differentiation capability
687
Modeling and performance analysis of resource allocation strategies for real-time services in UMTS using TIPPtool
688
Modeling and Performance Analysis of Restaurantʹs Service Delivery Process Using Colored Petri Nets
689
Modeling and Performance Characteristics of Nanofiltration by DSPM and ARX Model
690
Modeling and performance evaluation of a cellular mobile network
691
Modeling and Performance Evaluation of a Contract-based Electronic Signature Process
692
Modeling and performance evaluation of a flexure-based XY parallel micromanipulator
693
Modeling and Performance Evaluation of a full scale Petrochemical Waste water Treatment Process
694
MODELING AND PERFORMANCE EVALUATION OF DISTRIBUTED SYSTEMS WITH COORDINATOR
695
Modeling and Performance Evaluation of Energy Consumption in S-MAC Protocol Using Generalized Stochastic Petri Nets
696
Modeling and performance evaluation of ground source (geothermal) heat pump systems
697
Modeling and Performance Evaluation of Supply Chains Using Batch Deterministic and Stochastic Petri Nets
698
Modeling and performance evaluation of transport protocols for firewall control
699
Modeling and performance of a power distribution system for hybrid fiber/coax networks
700
Modeling and performance of a SRM drive with improved ride-through capability
701
Modeling and performance of a static frequency converter starting a 300 MVA synchronous machine
702
Modeling and performance of microscale thermophotovoltaic energy conversion devices
703
Modeling and performance of uncoated microcantilever-based chemical sensors
704
Modeling and Performance of Waste Tires as Media in Fixed Bed Sequence Batch Reactor
705
Modeling and performance prediction for water production in CBM wells of an Eastern India coalfield
706
Modeling and performance study of a beam microgyroscope
707
Modeling and performance study of restoration framework in WDM optical networks
708
Modeling and physical interpretation of photocatalytic oxidation efficiency in indoor air applications
709
Modeling and predicting buildingʹs energy use with artificial neural networks: Methods and results
710
Modeling and predicting emerging inference-based decisions in complex and ambiguous legal settings
711
Modeling and predicting microstructure evolution in lead/tin alloy via correlation functions and stochastic material reconstruction Original Research Article
712
Modeling and predicting non-isothermal microbial growth using general purpose software
713
Modeling and predicting of surface roughness for generating grinding gear
714
Modeling and predicting solubility of n-alkanes in water
715
Modeling and predicting spoilage of cooked, cured meat products by multivariate analysis
716
Modeling and predicting the Henryʹs law constants of methyl ketones in aqueous sodium sulfate solutions with artificial neural network
717
Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach
718
Modeling and Predicting the Survival of Breast Cancer Patients via Deep Neural Networks and Bayesian Algorithm
719
Modeling and predicting trends of heat stress based on climate change phenomenon: A case study in a semi-arid climate
720
Modeling and prediction (correction) of partition coefficients of bile acids and their derivatives by multivariate regression methods
721
Modeling and prediction by using WHIM descriptors in QSAR studies: submitochondrial particles (SMP) as toxicity blosensors of chlorophenols
722
Modeling and prediction by using whim descriptors in QSAR studies: toxicity of heterogeneous chemicals on Daphnia magna
723
Modeling and prediction for multivariate spatial factor analysis
724
Modeling and prediction of activity coefficient ratio of electrolytes in aqueous electrolyte solution containing amino acids using artificial neural network
725
Modeling and prediction of bulk properties of open-cell carbon foam
726
Modeling and prediction of C dynamics in soil chronosequences of the critical zone observatory (CZO) Marchfeld/Austria
727
Modeling and prediction of distribution system voltage distortion caused by nonlinear residential loads
728
Modeling and prediction of driver behavior by foot gesture analysis
729
Modeling and prediction of extraction profile for microwave-assisted extraction based on absorbed microwave energy
730
Modeling and Prediction of FRP Composite Cylinder tubes Crashworthiness Characteristics
731
Modeling and prediction of geothermal reservoir temperature behavior using evolutionary design of neural networks
732
Modeling and prediction of hybrid-coded variable bit rate video sources in fuzzy logic perspectives
733
Modeling and prediction of long-term performance of solar stills
734
Modeling and prediction of molecular properties. Theory of grid-weighted holistic invariant molecular (G-WHIM) descriptors
735
Modeling and prediction of multivariate space–time random fields
736
Modeling and prediction of photolysis half-lives of polycyclic aromatic hydrocarbons in aerosols by quantum chemical descriptors
737
Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method
738
Modeling and Prediction of the Dynamic Behaviour of Microbeams Under Electrostatic Load
739
Modeling and prediction of the effective thermal conductivity of random open-cell porous foams
740
Modeling and prediction of time-series of monthly copper prices
741
Modeling and prediction of Turkey’s electricity consumption using Artificial Neural Networks
742
Modeling and prediction of Turkey’s electricity consumption using Support Vector Regression
743
Modeling and predictions of solid–liquid equilibria for citalopram oxalate as a representative of a solid solution forming system
744
Modeling and preparation of activated carbon for methane storage I. Modeling of activated carbon characteristics with neural networks and response surface method
745
Modeling and preparation of activated carbon for methane storage II. Neural network modeling and experimental studies of the activated carbon preparation
746
Modeling and pricing long memory in stock market volatility
747
Modeling and pricing of block flexible electricity contracts
748
Modeling and Prioritizing Ecotourism Potential in National Park and Protected Area of Sarigol with Fuzzy-AHP in GIS
749
Modeling and probabilistic design optimization of a nanofiber-enhanced composite cylinder for buckling
750
Modeling and Process Analysis of a Biomass Gasifier-Molten Carbonate Fuel Cell-Gas Turbine-Steam Turbine Cycle as a Green Hybrid Power Generator
751
Modeling and process disturbance detection of autocorrelated data Original Research Article
752
Modeling and process simulation of controlled microwave heating of foods by using of the resonance phenomenon
753
Modeling and processing of functionally graded materials for rapid prototyping
754
Modeling and Product Grade Optimization of Fischer-Tropsch Synthesis in a Slurry Reactor
755
Modeling and Production of High Strength Al Strips by Equal Channel Multi Angular Pressing Method
756
MODELING AND PROJECTION OF FISH SUPPLY AND DEMAND IN MALAYSIA, 2000-2020
757
Modeling and prospects for a solid-state quantum computer
758
Modeling and protection of a three-phase power transformer using wavelet packet transform
759
Modeling and qualitative analysis of continuous-time neural networks under pure structural variations Original Research Article
760
Modeling and quality assessment of halftoning by error diffusion
761
Modeling and querying approximate direction relations
762
Modeling and querying fuzzy spatiotemporal databases
763
Modeling and querying graphical representations of statistical data
764
Modeling and random vibration analysis of SDOF systems with asymmetric hysteresis
765
Modeling and Rating Financial Soundness Indicators of Commercial Banks Using Confirmatory Factor Analysis and TOPSIS method
766
Modeling and real time mapping of phases during GTA welding of 1005 steel
767
Modeling and real time mapping of phases during GTA welding of 1005 steel
768
Modeling and real-time cartesian impedance control of 3-DOF robotic arm in contact with the surface
769
Modeling and real-time fault identification in transformers
770
Modeling and Real-Time Prediction of Classical Swine Fever Epidemics
771
Modeling and Reasoning over Distributed Systems using Aspect-Oriented Graph Grammars
772
Modeling and Reasoning with Bayesian Networks, A. Darwiche. Cambridge (2009)
773
Modeling and recognition of cursive words with hidden Markov models
774
Modeling and reducing edge effects in laser bending
775
Modeling and reduction of shocks on electronic components within a projectile
776
Modeling and Rendering Escher-Like Impossible Scenes
777
Modeling and Rendering of Heterogeneous Granular Materials: Granite Application
778
Modeling and rendering of points with local geometry
779
Modeling and retrieving images by content
780
Modeling and Rietveld-Refinement of the Crystal Structure of Bi4Ta2O11Based on That of Bi7Ta3O18
781
Modeling and Robust Control of a 5 DOF Model for Rowing Motion by Inverse Dynamics Method
782
Modeling and robust control of worm-gear driven systems
783
Modeling and Scale-Up of Mixing- and Temperature-Sensitive Chemical Reactions
784
Modeling and Scale-up of Sitosterol Hydrogenation Process: From Laboratory Slurry Reactor to Plant Scale
785
Modeling and scaling of the impulse turbine for wave power applications
786
Modeling and scheduling a case of flexible flowshops: Total weighted tardiness minimization
787
Modeling and Scheduling No-idle Hybrid Flow Shop Problems
788
Modeling and Scheduling No-idle Hybrid Flow Shop Problems
789
Modeling and scheduling of ratio-driven FMS using unfolding time Petri nets
790
Modeling and Scheduling Optimization for Bulk Ore Blending Process Original Research Article
791
Modeling and Scheduling University Course Timetabling Problems
792
Modeling and segmentation of floating foreground and background in videos
793
Modeling and seismic response of structures with concrete rocking columns and viscous dampers
794
Modeling and sensitivity analysis of a pneumatic vibration isolation system with two air chambers
795
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000
796
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000
797
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000
798
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000*1
799
Modeling and sensitivity analysis of multibody systems using new solid, shell and beam elements Original Research Article
800
Modeling and sensitivity analysis of neural networks Original Research Article
801
Modeling and sharing geographic data with INTERLIS
802
Modeling and simulating combustion and generation of NOx
803
Modeling and simulating coverage in sensor networks
804
Modeling and Simulating Dynamics of Missiles with Deflectable Nose Control
805
Modeling and simulating motions of human bodies in a futuristic distributed tele-immersive collaboration system for synthesizing transient input traffic
806
Modeling and simulating of the fast roll casting process
807
Modeling and simulating Poisson processes having trends or nontrigonometric cyclic effects
808
Modeling and Simulation a Catalytic Fixed Bed Reactor to Produce Ethyl Benzene from Ethanol
809
Modeling and simulation for damage analysis of intelligent, self-reconfigurable ship fluid systems in early design phase
810
Modeling and simulation for ductile fracture prediction of crystalline polymer based on craze behavior
811
Modeling and simulation for ductile fracture prediction of crystalline polymer based on craze behavior
812
Modeling and simulation for performance estimation of open distributed energy management systems
813
Modeling and simulation for the field emission of carbon nanotubes array
814
Modeling and simulation gas separation by membrane of poly dimethyl siloxane
815
Modeling and simulation gas separation by membrane of poly dimethyl siloxane
816
Modeling and simulation in the production process control and material property calculation of complex structured EB-PVD TBCs
817
Modeling and simulation of 1 MWe solar tower plant’s solar flux distribution on the central cavity receiver
818
Modeling and Simulation of 3-Phase Voltage and Current Source Inverter using MATLAB/SIMULINK for Various Loads
819
Modeling and simulation of 5-axis milling processes
820
Modeling and Simulation of 6DOF Robot Manipulators with Tactile Position-Force Control
821
Modeling and simulation of a 100 kWe HT-PEMFC subsystem integrated with an absorption chiller subsystem
822
Modeling and Simulation of a 12 MW Wind Farm
823
Modeling and simulation of a class of coupled thermo-chemo-mechanical processes in multiphase solids Original Research Article
824
Modeling and simulation of a cycloconverter drive system for harmonic studies
825
Modeling and simulation of a direct methanol fuel cell anode
826
Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification
827
Modeling and simulation of a double auction artificial financial market
828
Modeling and simulation of a downdraft biomass gasifier 1. Model development and validation
829
Modeling and simulation of a freight train brake system
830
Modeling and simulation of a fully air swept ball mill in a raw material grinding circuit
831
Modeling and Simulation of a Gasoline-Electric Vehicle
832
Modeling and simulation of a grid connected PV system based on the evaluation of main PV module parameters
833
Modeling and simulation of a grid-connected PV generation system for electromagnetic transient analysis
834
Modeling and simulation of a hybrid actuator
835
Modeling and simulation of a hybrid dynamic system used in haptic interfaces Original Research Article
836
Modeling and simulation of a hydrostatic transmission with variable-displacement pump Original Research Article
837
Modeling and Simulation of a Jumping Four-legged Robot on Staircases
838
Modeling and simulation of a MOSFET gas sensor with platinum gate for hydrogen gas detection
839
Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell
840
Modeling and simulation of a new Bridgeless SEPIC power factor correction circuit
841
Modeling and simulation of a PEM fuel cell stack considering temperature effects
842
Modeling and simulation of a root-zone heating in greenhouse using solar collectors
843
Modeling and Simulation of a Side-Port Regenerative Glass Furnace
844
Modeling and simulation of a simple glass window
845
Modeling and simulation of a single direct carbon fuel cell
846
Modeling and simulation of a SMB chromatographic process designed for enantioseparation
847
Modeling and simulation of a solar powered two bed adsorption air conditioning system
848
Modeling and Simulation of a Spherical Mobile Robot
849
Modeling and simulation of a stand-alone photovoltaic system using an adaptive artificial neural network: Proposition for a new sizing procedure
850
MODELING AND SIMULATION OF A TRAFFIC FLOW MODEL CONSIDERING THE INFLUENCE OF TRAFFIC INTERRUPTION
851
Modeling and simulation of absorption–desorption cyclic processes for hydrogen storage-compression using metal hydrides
852
Modeling and simulation of ac–dc buck-boost converter fed dc motor with uniform PWM technique
853
Modeling and Simulation of Acoustic Signal Transmission Losses in Shallow Water Channels Using Neural Networks
854
Modeling and simulation of active suspensions containing large numbers of interacting micro-swimmers
855
Modeling and simulation of aerial refueling by finite element method
856
Modeling and Simulation of Alternative Injections of CO2 and Water into Porous Carbonate Formations
857
Modeling and simulation of AlxGayIn1−x−yAs/InP quaternary structure for photovoltaic
858
Modeling and simulation of an activated carbon-based botanical air filtration system for improving indoor air quality
859
Modeling and simulation of an activated carbon–CO2 four bed based adsorption cooling system
860
Modeling and simulation of an impact test using wavelets, analytical solutions and finite elements
861
Modeling and Simulation of an Industrial Fluid Catalytic Cracking Riser Reactor Using a Lump-Kinetic Model for a Distinct Feedstock
862
Modeling and simulation of an industrial secondary reformer reactor in the fertilizer plants
863
Modeling and simulation of an integrated multi-shell fixed bed membrane reactor with well-mixed catalyst pattern for production of styrene and cyclohexane
864
Modeling and simulation of an oilseed meal desolventizing process Original Research Article
865
Modeling and Simulation of an Oxygen-Blown Bubbling Fluidized Bed Gasifier using the Computational Particle- Fluid Dynamics (CPFD) Approach
866
Modeling and simulation of asphaltene precipitation by normal pressure depletion
867
Modeling and simulation of asymmetrical three-roll bending process
868
Modeling and simulation of autonomous underwater vehicles: design and implementation
869
Modeling and simulation of buckling of embedded carbon nanotubes
870
Modeling and simulation of butanol separation from aqueous solutions using pervaporation
871
Modeling and simulation of carbon black synthesis in an aerosol flame reactor
872
Modeling and simulation of catalytic partial oxidation of methane to synthesis gas by using a plasma-assisted gliding arc reactor
873
Modeling and simulation of C-E deep bowl pulverizer
874
Modeling and simulation of cell populations interaction
875
Modeling and simulation of cement clinkering process with compact internal burning of carbon
876
Modeling and simulation of cement hydration kinetics and microstructure development Review Article
877
Modeling and simulation of centerless grinding of ball bearings
878
Modeling and simulation of circulating fast fluidized bed reactors and circulating fast fluidized bed membrane reactors for production of hydrogen by oxidative reforming of methane
879
Modeling and simulation of circulating fluidized bed reactor with catalytic ozone decomposition reaction
880
Modeling and Simulation of Claus Unit Reaction Furnace
881
Modeling and simulation of clean fuel production by Enterobacter cloacae IIT-BT 08
882
Modeling and simulation of co-gasification of coal and petcoke in a bubbling fluidized bed coal gasifier
883
Modeling and simulation of cogeneration nuclear power plant for seawater desalination
884
Modeling and simulation of combined gas turbine engine and heat pipe system for waste heat recovery and utilization
885
Modeling and simulation of combined pyrolysis and reduction zone for a downdraft biomass gasifier
886
Modeling and Simulation of Common Mode Voltage in a Three-Phase Delta Connection STATCOM with Parasitic Capacitors
887
Modeling and simulation of communication systems: an overview
888
Modeling and simulation of compressed air storage in caverns: A case study of the Huntorf plant
889
MODELING AND SIMULATION OF CONDENSED SULFUR IN CATALYTIC BEDS OF CLAUS PROCESS: RAPID ESTIMATION
890
Modeling and simulation of consumer response to dynamic pricing with enabled technologies
891
Modeling and simulation of corporate lifecycle using system dynamics
892
Modeling and simulation of corrosion product activity in pressurized water reactors under power perturbations
893
Modeling and simulation of coupled nuclear heat energy deposition and transfer in the fuel assembly of the Ghana Research Reactor-1 (GHARR-1)
894
Modeling and simulation of curing kinetics for the cardanol-based vinyl ester resin by means of non-isothermal DSC measurements
895
Modeling and simulation of cylindrical electro-chemical magnetic abrasive machining of AISI-420 magnetic steel
896
Modeling and simulation of damage in elastomer structures at high strains
897
Modeling and simulation of data transmission on a hybrid fiber coax cable network
898
Modeling and Simulation of DC Electric Railway System with Regenerative Braking: A Case Study of Isfahan Metro Line 1
899
Modeling and simulation of DC motors in dynamic conditions allowing for the armature reaction
900
Modeling and simulation of deadbeat-based PI controller in a single-phase H-bridge inverter for stand-alone applications
901
Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture
902
Modeling and simulation of deformation of hydrogels responding to electric stimulus
903
Modeling and simulation of desiccant wheel for air conditioning
904
Modeling and Simulation of Diimide Hydrogenation of Nitrile Butadiene Rubber Latex
905
Modeling and simulation of direct output current control for LCL-interfaced grid-connected inverters with parallel passive damping
906
Modeling and simulation of directional hardening in metals during non-proportional loading
907
Modeling and simulation of dissolved lead in groundwater influenced by porosity and seepage velocity in homogeneous formation
908
Modeling and Simulation of Distillation of a Binary Non-Reacting Mixture Using Rate-Based Approach in Packed Column under Total Reflux
909
Modeling and simulation of distributed systems and networks
910
Modeling and simulation of drug release from multi-layer biodegradable polymer microstructure in three dimensions
911
Modeling and simulation of drying operations in PVC powder production line: Experimental and theoretical study of drying kinetics on particle scale
912
Modeling and simulation of effective forces in the manipulation of cylindrical nanoparticles in a liquid medium
913
Modeling and simulation of electric machines, converters and systems
914
Modeling and simulation of electrification delivery in functionalized textiles in electromagnetic fields
915
Modeling and simulation of electronic structure, material interface and random doping in nano-electronic devices
916
Modeling and simulation of entric -virus transport in deltaic environment rivers state of Nigeria
917
Modeling and simulation of enzymatic membrane reactor for kinetic resolution of ibuprofen ester
918
Modeling and simulation of equation of state for nonadditive hard disk mixtures
919
Modeling and simulation of evaporation–pyrolysis processes of a naturally smoldering cylindrical cellulosic materials rod: Effect of smoldering rate on product concentrations
920
Modeling and Simulation of Fed-Batch Protein Refolding Process
921
Modeling and Simulation of Finite State Machine Memory Built-in Self Test Architecture for Embedded Memories
922
Modeling and Simulation of FIR Filters and Comparison of Frequency Response in Time Domain and Frequency Domain for UMTS
923
Modeling and simulation of fire spreading through the activity tracking paradigm
924
Modeling and simulation of fire spreading through the activity tracking paradigm
925
Modeling and simulation of fish-like swimming
926
Modeling and simulation of flexible needles
927
Modeling and simulation of flexible slider-crank mechanism with clearance for a closed high speed press system
928
Modeling and simulation of FPGA-based variable-speed drives using Simulink Original Research Article
929
Modeling and simulation of galvanic corrosion pit as a moving boundary problem
930
Modeling and simulation of gene regulation and metabolic pathways
931
Modeling and simulation of genetic algorithm using meta-models
932
Modeling and simulation of GPR wave propagation through wet snowpacks: Testing the sensitivity of a method for snow water equivalent estimation
933
Modeling and simulation of grain growth in Si3N4. III. Tip shape evolution Original Research Article
934
Modeling and simulation of gravitational solid–solid separation for optimum performance
935
Modeling and simulation of grid-connected photovoltaic energy conversion systems
936
Modeling and Simulation of Hamburger Cooking Process Using Finite Difference and CFD Methods
937
Modeling and simulation of heat transfer phenomena during investment casting
938
Modeling and Simulation of Heat Transfer Phenomenon in Steel Belt Conveyer Sulfur Granulating Process
939
Modeling and simulation of HgCdTe based p+–n–n+ LWIR photodetector
940
Modeling and simulation of high speed sliding
941
Modeling and simulation of hydraulic buffering valve for power-shift transmission
942
Modeling and Simulation of Hydraulic Roll Bending System Based on CMAC Neural Network and PID Coupling Control Strategy Original Research Article
943
Modeling and simulation of hydrogen combustion in engines
944
Modeling and simulation of hydrogen generation from high-temperature and low-temperature water gas shift reactions
945
Modeling and simulation of IEEE 802.11 WLAN mobile ad hoc networks using topology broadcast reverse-path forwarding (TBRPF)
946
Modeling and simulation of inertial drop break-up in a turbulent pipe flow downstream of a restriction
947
Modeling and simulation of inorganic shell and tube membranes for vapor permeation
948
Modeling and Simulation of Interfacial Turbulent Flows
949
Modeling and Simulation of Ionic Currents in Three-Dimensional Microfluidic Devices with Nanofluidic Interconnects
950
Modeling and simulation of irradiation effects on martensitic transformations in shape memory alloys Original Research Article
951
Modeling and simulation of irradiation hardening in structural ferritic steels for advanced nuclear reactors
952
Modeling and Simulation of Kuhni Extraction Column Using a Rate-based Model
953
Modeling and simulation of large scale hydrogen production
954
Modeling and simulation of large-scale ductile fracture in plates and shells
955
Modeling and simulation of large-scale ductile fracture in plates and shells
956
Modeling and simulation of Li-ion conduction in poly(ethylene oxide)
957
Modeling and simulation of liquid pulsed particulate fluidized beds
958
Modeling and simulation of load heating in heat treatment furnaces
959
Modeling and simulation of long-wave infrared InAs/GaSb strained layer superlattice photodiodes with different passivants
960
Modeling and simulation of loose spring skirt damping and control of vibrations in a multi-segment hanging cantilever Original Research Article
961
Modeling and simulation of low-cycle fatigue life of steel reinforcing bars using artificial neural network
962
Modeling and simulation of magnetic-shape-memory polymer composites
963
Modeling and simulation of maintenance operations at Kuwait public transport company
964
Modeling and Simulation of Manufacturing Systems and Extended Enterprises
965
Modeling and simulation of martensitic phase transitions with a triple point
966
Modeling and simulation of materials synthesis: Chemical vapor deposition and infiltration of pyrolytic carbon
967
Modeling and simulation of matrix converter/induction motor drive Original Research Article
968
Modeling and simulation of mechanical properties of nano-particle filled materials
969
Modeling and simulation of membrane bioreactors by incorporating simultaneous storage and growth concept: an especial attention to fouling while modeling the biological process Original Research Article
970
Modeling and simulation of metabolic networks for estimation of biomass accumulation parameters Original Research Article
971
Modeling and simulation of methane steam reforming in a thermally coupled membrane reactor
972
MODELING AND SIMULATION OF MHD CONVECTIVE HEAT TRANSFER OF CHANNEL FLOW HAVING A CAVITY
973
Modeling and simulation of microwave double absorption on methanol steam reforming for hydrogen production
974
Modeling and simulation of mid-IR amplifying characteristics of Tm3+-doped chalcogenide Photonic Crystal Fibers
975
Modeling and simulation of mixed-signal electronic designs - Enabling analog and discrete subsystems to be represented uniformly within a single framework
976
Modeling and Simulation of Modern Industrial Screens using Discrete Element Method
977
Modeling and simulation of multicellular tumor growth using a nonlinear matter wave equation
978
Modeling and Simulation of Multilevel Inverters used in Hybrid Systems (PV/Wind) Connected to Smart Grid
979
Modeling and simulation of multiple impacts of falling rigid bodies
980
Modeling and simulation of muscle forces of trans-tibial amputee to study effect of prosthetic alignment
981
Modeling and simulation of net energy gain by dark fermentation
982
Modeling and simulation of next-generation multimode fiber links
983
Modeling and simulation of nitrogen regulation in Corynebacterium glutamicum Original Research Article
984
Modeling and simulation of nonsolvent vapor-induced phase separation
985
Modeling and Simulation of Olefin Polymerization at Microstructure Level
986
Modeling and simulation of osmotic pressure controlled electro-ultrafiltration in a cross-flow system
987
Modeling and simulation of partial deposition of phosphorous and heavy metal influenced by permeability and void ratio in soil and water in Oyigbo, rivers state of Nigeria
988
Modeling and Simulation of Partial Oxidation of Methanol to Formaldehyde on FeO/MoO3 Catalyst in a Catalytic Fixed Bed Reactor
989
Modeling and simulation of performance analysis for a cluster-based Web server
990
Modeling and simulation of petroleum coke calcination in rotary kilns
991
Modeling and simulation of photonic devices by generalized space mapping technique
992
Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model
993
Modeling and simulation of piezocomposites Original Research Article
994
Modeling and simulation of pit chemistry of 304 austenitic stainless steel under applied stress in sodium chloride solution
995
Modeling and simulation of plasma jet by lattice Boltzmann method
996
Modeling and simulation of point-non-point source effluent trading in Taihu Lake area: perspective of non-point sources control in China
997
Modeling and simulation of pollutants transport in rivers
998
Modeling and simulation of polyhydroxybutyrate production by Protomonas extorquens in fed-batch culture
999
Modeling and Simulation of Pressure Equalization Step Between a Packed Bed and an Empty Tank in Pressure Swing Adsorption Cycles
1000
Modeling and simulation of productʹs surface design