<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Development of a fretting–fatigue mapping concept: The effect of material properties and surface treatments
2
Development of a friction energy capacity approach to predict the surface coating endurance under complex oscillating sliding conditions
3
Development of a fritless packed column for capillary electrochromatography–mass spectrometry
4
Development of a front end ASIC for Dark Matter directional detection with MIMAC
5
Development of a front end ASIC for Dark Matter directional detection with MIMAC
6
Development of a front-end analog circuit for multi-channel SiPM readout and performance verification for various PET detector designs
7
Development of a front-end analog circuit for multi-channel SiPM readout and performance verification for various PET detector designs
8
Development of a FTIR-ATR based model for typing clinically relevant Acinetobacter baumannii clones belonging to ST98, ST103, ST208 and ST218
9
Development of a full scale ECRH mm-wave launching system mock-up for ITER
10
Development of a full scale remote steerable ECRH mm-wave launching system test set-up for ITER
11
Development of a fully automated on-line solid phase extraction and high-performance liquid chromatography with diode array detection method for the pharmacokinetic evaluation of bavachinin: A study on absolute bioavailability and dose proportionality
12
Development of a fully automated sequential injection solid-phase extraction procedure coupled to liquid chromatography to determine free 2-hydroxy-4-methoxybenzophenone and 2-hydroxy-4-methoxybenzophenone-5-sulphonic acid in human urine Original Research
13
Development of a Fully Integrated Analysis System for Ions Based on Ion-Selective Optodes and Centrifugal Microfluidics
14
Development of a fully Lagrangian MPS-based coupled method for simulation of fluid–structure interaction problems
15
Development of a fully-distributed daily hydrologic feedback model addressing vegetation, land cover, and soil water dynamics (VELAS)
16
Development of a functional status assessment of seniors visiting emergency department
17
Development of a fundamental crack tip strain rate equation and its application to quantitative prediction of stress corrosion cracking of stainless steels in high temperature oxygenated water
18
Development of a fundamental equation of state for the liquid region of a pure fluid from speed of sound measurements. Application to water
19
Development of a fuzzy air quality performance indicator
20
Development of a fuzzy ANP based SWOT analysis for the airline industry in Turkey
21
Development of a Fuzzy Controller with UPFC’s For Damping of Oscillation in Multi-machine Integrated Power System
22
Development of a fuzzy decision support system for commodity acquisition using fuzzy analytic network process
23
Development of a fuzzy decision support system to determine the severity of obstructive pulmonary in chemical injured victims
24
Development of a fuzzy goal programming model for optimization of lead time and cost in an overlapped product development project using a Gaussian Adaptive Particle Swarm Optimization-based approach
25
Development of a fuzzy goal programming model for optimization of lead time and cost in an overlapped product development project using a Gaussian Adaptive Particle Swarm Optimization-based approach
26
Development of a fuzzy inference system based on genetic algorithm for high-impedance fault detection
27
Development of a fuzzy logic traffic system for isolated signalized intersections in the State of Kuwait
28
Development of a Fuzzy Model for Iranian Marine Casualties Management
29
Development of a fuzzy sales forecasting system for vending machines
30
Development of a fuzzy saturation index for sulfate scale prediction
31
Development of a fuzzy-expert system for incident detection and classification
32
Development of a fuzzy-nets-based in-process surface roughness adaptive control system in turning operations
33
Development of a fuzzy-nets-based surface roughness prediction system in turning operations
34
Development of a GA-based method for reliability-based optimization of structures with discrete and continuous design variables using OpenSees and Tcl
35
Development of a gadolinium-loaded liquid scintillator for solar neutrino detection and neutron measurements
36
Development of a gadolinium-loaded liquid scintillator for solar neutrino detection and neutron measurements
37
Development of a galling resistance test method with a uniform stress distribution
38
Development of a Gallium-Doped Germanium Far-Infrared Photoconductor Direct Hybrid Two-Dimensional Array
39
Development of a galvanic monitoring probe to improve service life prediction of reinforced concrete structures with respect to reinforcement corrosion
40
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structure: Part 2. Laboratory electrochemical testing of sensors in concrete
41
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structures: Part 1. Laboratory tests to correlate galvanic current with actual damage
42
Development of a galvanostatic analysis technique as an in-situ diagnostic tool for PEMFC single cells and stacks
43
Development of a gamma compensated boron lined ionisation chamber for reactor safety and control applications
44
Development of a gamma compensated boron lined ionisation chamber for reactor safety and control applications
45
Development of a gamma-camera with a functional collimator
46
Development of a gamma-camera with a functional collimator
47
Development of a Gamma-Ray Box (GARBO)
48
Development of a Gamma-Ray Box (GARBO)
49
Development of a gas chromatographic method for the determination of Chlorpyrifos and its metabolite Chlorpyrifos-oxon in wine matrix
50
Development of a gas chromatographic test for the quantification of the biomarker 3-bromopropionic acid in human urine
51
Development of a gas chromatography compatible Sample Processing System (SPS) for the in-situ analysis of refractory organic matter in martian soil: preliminary results Original Research Article
52
Development of a gas chromatography/mass spectrometry method to quantify several urinary monohydroxy metabolites of polycyclic aromatic hydrocarbons in occupationally exposed subjects
53
Development of a gas chromatography–mass spectrometry method for the determination of household insecticides in indoor air
54
Development of a gas chromatography–mass spectrometry method for the determination of pesticides in gaseous and particulate phases in the atmosphere Original Research Article
55
Development of a gas diffusion probe for the rapid measurement of pCO2 in aquatic samples Original Research Article
56
Development of a gas filter against wire chamber ageing for the MDT chambers in ATLAS
57
Development of a gas filter against wire chamber ageing for the MDT chambers in ATLAS
58
Development of a gas layer to mitigate cavitation damage in liquid mercury spallation targets
59
Development of a gas phase combustion model suitable for low and high turbulence conditions
60
Development of a Gas Sampling Technique for Determining Trace Elements in Submarine Volcanic Exhalations
61
Development of a gas sensor by thick film technology for automotive applications: choice of materials—realization of a prototype
62
Development of a gas turbine fuel nozzle for DME and a design method thereof
63
Development of a gaseous PMT with micro-pattern gas detectors
64
Development of a gaseous PMT with micro-pattern gas detectors
65
Development of a gastight sealing material for ceramic components
66
Development of a Gastroretentive Drug Delivery System based on Superporous Hydrogel
67
Development of a GC-MS Method for Determination of various Polycyclic Aromatic Hydrocarbons in Iranian Traditional and Semi-industrial Taftoon Bread
68
Development of a GC–MS/MS strategy to determine 15 mycotoxins and metabolites in human urine
69
Development of a Gd loaded liquid scintillator for electron anti-neutrino spectroscopy
70
Development of a Gd loaded liquid scintillator for electron anti-neutrino spectroscopy
71
Development of a Geant4 solid for stereo mini-jet cells in a cylindrical drift chamber Original Research Article
72
Development of a gel monolithic column polydimethylsiloxane microfluidic device for rapid electrophoresis separation
73
Development of a gel-to-gel electro-kinetic pinched injection method for an integrated micro-fluidic based DNA analyser Original Research Article
74
Development of a GEM-based High Resolution TPC for the ILC
75
Development of a GEM-based High Resolution TPC for the ILC
76
Development of a general approach to the synthesis of a library of isoflavonoid derivatives
77
Development of a general ecosystem model for a range of scales and ecosystems
78
Development of a general ecosystem model for a range of scales and ecosystems
79
Development of a general intertrip monitoring system for the NGC network
80
Development of a General Potexvirus Detection Method
81
Development of a general river regime index (RRI) for intra-annual flow variation based on the unit river concept and flow variation end-points
82
Development of a general, enantioselective organocatalytic Mukaiyama–Michael reaction with α,β-unsaturated aldehydes
83
Development of a generalized coalescence and breakup closure for the inhomogeneous MUSIG model
84
Development of a generalized material interface for the simulation of finite elasto-plastic deformations
85
Development of a generalized neural network
86
Development of a generalized parameter window for cold spray deposition
87
Development of a generalized parameter window for cold spray deposition Original Research Article
88
Development of a generic assay for the determination of total trihydroxybenzoate derivatives based on gold-luminol chemiluminescence Original Research Article
89
Development of a generic computer-aided process planning support system
90
Development of a generic crop model template in the cropping system model APSIM
91
Development of a generic flow injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach I. Selection and evaluation of the FIA system parameters
92
Development of a generic flow injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach: I. Selection and evaluation of the FIA system parameters Original Research Article
93
Development of a generic flow-injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach: Part II. Selection and evaluation of the chemical reaction parameters Original Research Article
94
Development of a generic microelectrode array biosensing system Original Research Article
95
Development of a generic multipurpose tokamak plasma discharge flight simulator
96
Development of a generic repair joint for certification of bonded composite repairs
97
Development of a generic repair joint for certification of bonded composite repairs
98
Development of a Generic Risk Matrix to Manage Project Risks
99
Development of a Genetic Algorithm for Advertising Time Allocation Problems
100
Development of a genetic algorithm for component placement sequence optimization in printed circuit board assembly
101
Development of a genetic algorithm-based lookup table approach for efficient numerical integration in the method of finite spheres with application to the solution of thin beam and plate problems
102
Development of a genetic selection for catalytic antibodies
103
Development of a genetically tuned fuzzy dynamic model for nonlinear dynamical systems: Application to reaction section of Tennessee Eastman process
104
Development of a Geographic Database Infrastructure at the Atatürk Arboretum Using Free Open Source Software(s)
105
Development of a geography-referenced regional exposure assessment tool for European rivers - great-er contribution to great-er #1
106
DEVELOPMENT OF A GEOMATERIAL FROM DREDGED BAY MUD
107
Development of a geometric flight unloading model for flighted rotary dryers
108
Development of a geometric model for an all-reflective camera system
109
Development of a geomorphological instantaneous unit hydrograph model for scantily gauged watersheds
110
Development of a geospatial model to quantify, describe and map urban growth
111
Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties
112
Development of a Ginkgo biloba fingerprint chromatogram with UV and evaporative light scattering detection and optimization of the evaporative light scattering detector operating conditions
113
Development of a GIS of the Moray Firth (Scotland, UK) and its application in environmental management (site selection for an `artificial reefʹ)
114
Development of a GIS-based decision support system for urban air quality management in the city of Istanbul
115
Development of a glass GEM
116
Development of a glass GEM
117
Development of a glass optical fiber containing ZnO–Al2O3–SiO2 glass-ceramics doped with Co2+ and its optical absorption characteristics
118
Development of a Global Backscatter Model in support to the Sentinel-1 mission design
119
Development of a global computable general equilibrium model coupled with detailed energy end-use technology
120
Development of a global evapotranspiration algorithm based on MODIS and global meteorology data
121
Development of a global MHD simulation model for the S-M-I coupling process in the substorm prediction program at CRL Original Research Article
122
Development of a global stochastic model relating the distribution of individual cell and population physiological states
123
Development of a global voltage security indicator (VSI) and role of SVC on it in longitudinal power supply (LPS) system
124
Development of a globally applicable model for near real-time prediction of seismically induced landslides
125
Development of a GNSS water vapour tomography system using algebraic reconstruction techniques Original Research Article
126
Development of a goal programming model for optimization of truck allocation in open pit mines
127
Development of a gold nanoparticles based chemiluminescence imaging assay and its application
128
Development of a gold nanoparticles based chemiluminescence imaging assay and its application Original Research Article
129
Development of a GPC-based sliding mode controller
130
Development of a GPU-based high-performance radiative transfer model for the Infrared Atmospheric Sounding Interferometer (IASI)
131
Development of a gradient elution preparative high performance liquid chromatography method for the recovery of the antibiotic ertapenem from crystallization process streams
132
Development of a gradient reversed-phase HPLC method for the determination of sodium ferulate in beagle dog plasma
133
Development of a granular normal contact force model based on a non-Newtonian liquid filled dashpot
134
Development of a graphical interface for the Rietveld refinement program DBWS
135
Development of a graphical user interface for a real-time power system simulator
136
Development of a graphical user interface for the conformal finite-difference/time-domain (CFDTD) software package
137
Development of a green chromatographic method for determination of colorants in food samples
138
Development of a green chromatographic method for determination of fat-soluble vitamins in food and pharmaceutical supplement
139
Development of a Green Combat Armour from Rame-Kevlar-Polyester Composite
140
Development of a green extraction procedure with super/subcritical fluids to produce extracts enriched in oleuropein from olive leaves
141
Development of a green fluorescent tagged strain of Aspergillus carbonarius to monitor fungal colonization in grapes
142
Development of a green separation technique for recovery of Wilkinsonʹs catalysts from bulk hydrogenated nitrile butadiene rubber
143
Development of a greenhouse gas accounting GIS-based tool to support local policy making—application to an Italian municipality
144
Development of a Greenhouse Side-ventilation Controller driven by Photovoltaic Energy
145
Development of a ground displacement measurement method for failed slopes at the toes of landslides
146
Development of a ground-based radar for scattering measurements
147
Development of a ground-based space micro-algae photo-bioreactor Original Research Article
148
Development of a ground-water modeling system for military installation restoration
149
Development of a group contribution method for determination of thermal conductivity of ionic liquids
150
Development of a group contribution method for estimating the thermal decomposition temperature of ionic liquids
151
Development of a group contribution method for polymers within the PC-SAFT model
152
Development of a group selective molecularly imprinted polymers based solid phase extraction of malachite green from fish water and fish feed samples Original Research Article
153
Development of a group treatment for enhancing motivation to change PTSD symptoms Original Research Article
154
Development of a group-specific immunoassay for sulfonamides: Application to bee honey analysis
155
Development of a growth inhibition test with the marine and brackish water red alga Ceramium tenuicorne
156
Development of a growth medium suitable for exopolysaccharide production by Lactobacillus delbrueckii ssp. bulgaricus RR
157
Development of a GSO detector assembly for a continuous blood sampling system
158
Development of a GTM-based patent map for identifying patent vacuums
159
Development of a Guidance System for an Agricultural Wheeled Robotic Platform in Row Crop Fields
160
Development of a guinea pig model of chorioamnionitis and fetal brain injury
161
Development of a GVM-based ion beam energy stabilization system at the Bucharest Van de Graaff FN tandem accelerator
162
Development of a GVM-based ion beam energy stabilization system at the Bucharest Van de Graaff FN tandem accelerator
163
Development of a hand–arm mechanical analogue for evaluating chipping hammer vibration emission values
164
Development of a handheld 16 channel pen-type LAPS for electrochemical sensing
165
Development of a hand-held sensor probe for detection of sound components radiated from a specific device using surface intensity measurements
166
Development of a hard nano-structured multi-component ceramic coating by laser cladding
167
Development of a hashing-based data structure for the fast retrieval of 3D terrestrial laser scanned data
168
Development of a Hazard and Operability-based method for identifying safety management vulnerabilities in high risk systems
169
Development of a hazard assessment model for near surface caves in limestone
170
Development of a head scanner for proton CT
171
Development of a head scanner for proton CT
172
Development of a headspace gas chromatographic test for the quantification of 1- and 2-bromopropane in human urine
173
Development of a headspace gas chromatography method to determine residual aliphatic amines in oligonucleotides
174
Development of a headspace solid phase microextraction-gas chromatography method for monitoring volatile compounds in extended time–course experiments of olive oil Original Research Article
175
Development of a headspace solid-phase microextraction gas chromatography–mass spectrometric method for the determination of short-chain fatty acids from intestinal fermentation
176
Development of a headspace solid-phase microextraction method combined with gas chromatography mass spectrometry for the determination of phthalate esters in cow milk Original Research Article
177
Development of a headspace solid-phase microextraction procedure for the determination of free volatile fatty acids in waste waters
178
Development of a headspace solid-phase microextraction–gas chromatography–mass spectrometry method for the identification of odour-causing volatile compounds in packaging materials
179
Development of a headspace trap HRGC/MS method for the assessment of the relevance of certain aroma compounds on the sensorial characteristics of commercial apple juice
180
Development of a headspace-solid phase micro extraction method to monitor changes in volatile profile of rose (Rosa hybrida, cv David Austin) petals during processing
181
Development of a health care provider survey for domestic violence: Psychometric properties Original Research Article
182
Development of a health care systems curriculum
183
Development of a Health Literacy Program for Parents of Children with Cancer: A Mixed-Methods Study Protocol
184
Development of a Health Literacy Promotion Program (HeLPP) to Promote Self-Care Behaviors and Quality of Life among Rural Patients with Type 2 Diabetes: Preliminary Results
185
DEVELOPMENT OF A HEALTH PROMOTION QUESTIONNAIRE INDEX (HPQI) TO MEASURE DOKTOR MUDA (JUNIOR DOCTOR) PROGRAMME IMPACT ON SCHOOLCHILDREN’S ORAL HEALTH KNOWLEDGE, ATTITUDES AND BEHAVIOUR
186
Development of a health sciences library at a historically black college and university (HBCU): laying the foundation for increased minority health and health disparities
187
Development of a Healthcare Coalition for Emergency Preparedness
188
Development of a health-related lifestyle self-management intervention for patients with coronary heart disease
189
Development of a Heart Failure Palliative Care Educational Program for Nurses: A Multi Method Approach
190
Development of a heat exchanger for the cold side of a thermoelectric module
191
Development of a heat transfer correlation for a Scraped-Surface Heat Exchanger
192
Development of a heat transfer dimensionless correlation for spheres immersed in a wide range of Prandtl number fluids
193
Development of a Heat Transfer Model for Plant Tissue Culture Vessels
194
Development of a heat-sensor for the measurement of reaction enthalpy based on laser deflection
195
Development of a heavy demining machine
196
Development of a heavy metal sorption system through the PS functionalization of coconut (Cocos nucifera) fibers
197
Development of a heavy metals enzymatic-based assay using papain Original Research Article
198
Development of a helicopter-mounted eye-safe laser radar system for distance measurement between power transmission lines and nearby trees
199
Development of a helium atmosphere soil incubation technique for direct measurement of nitrous oxide and dinitrogen fluxes during denitrification
200
Development of a helium atmosphere soil incubation technique for direct measurement of nitrous oxide and dinitrogen fluxes during denitrification
201
Development of a helium-cooled divertor concept: design-related requirements on materials and fabrication technology
202
Development of a helium-cooled divertor: Material choice and technological studies
203
Development of a Hemilabile P-P=O Ligand Based on the Concept of Conformational Control
204
Development of a herbicide application map using artificial neural networks and fuzzy logic
205
Development of a herbicide biosensor using a peptide receptor screened from a combinatorial library
206
Development of a heterobimetallic Ru(II)–Cu(II) complex for highly selective and sensitive luminescence sensing of sulfide anions Original Research Article
207
Development of a heterogeneous catalytic cracking reactor utilizing online mass spectrometry analysis
208
Development of a heterogeneous chemiluminescent flow immunoassay for DDT and related compounds Original Research Article
209
Development of a hexavalent chromium ISFET sensor with a polymeric membrane including tributylphosphate
210
Development of a hierarchical Bayesian model to estimate the growth parameters of Listeria monocytogenes in minimally processed fresh leafy salads
211
Development of a hierarchical system for the teletransmission of environmental and energy data
212
Development of a Higee bioreactor (HBR) for production of polyhydroxyalkanoate: Hydrodynamics, gas–liquid mass transfer and fermentation studies
213
Development of a high current electron gun to generate single-bunch beams with the L-band linear accelerator in Osaka University
214
Development of a high current electron gun to generate single-bunch beams with the L-band linear accelerator in Osaka University
215
Development of a high current supersonic ion source for electromagnetic accelerators
216
Development of a high cycle fatigue testing system and its application to thin aluminum film
217
Development of a high density carbonaceous adsorbent from compressed wood Original Research Article
218
Development of a high efficiency and high resolution Compton probe for prostate imaging
219
Development of a high efficiency and high resolution Compton probe for prostate imaging
220
Development of a high efficiency annular detector system for RIB experiments at NSC
221
Development of a high efficiency annular detector system for RIB experiments at NSC
222
Development of a high efficiency radiation converter using a spiral heat exchanger
223
Development of a high efficient gas to hydrate (GTH) conversion process using SDS kinetic promoter for maximizing the CO2 recovery with minimum energy consumption
224
Development of a high energy pulsed plasma simulator for the study of liquid lithium trenches
225
Development of a high gradient permanent magnetic separator (HGPMS)
226
Development of a high lateral resolution TOF-SIMS apparatus for single particle analysis
227
Development of a high modulus paste fill using fine gold mill tailings
228
Development of a high performance anion exchange chromatography analysis for mapping of oligosaccharides
229
Development of a high performance Cu-based ternary oxide catalyst for oxidative steam reforming of methanol using an artificial neural network Original Research Article
230
Development of a high performance electrochemical cofactor regeneration module and its application to the continuous reduction of FAD
231
Development of a High Performance End Mill Based on the Analysis of Chip Flow Generated by Curved Rake Face
232
Development of a high performance liquid chromatography method and a liquid chromatography–tandem mass spectrometry method with pressurized liquid extraction for simultaneous quantification and confirmation of cyromazine, melamine and its metabolites in f
233
Development of a high performance liquid chromatography method and a liquid chromatography–tandem mass spectrometry method with the pressurized liquid extraction for the quantification and confirmation of sulfonamides in the foods of animal origin
234
Development of a high performance liquid chromatography method for quantification of isomers β-caryophyllene and α-humulene in copaiba oleoresin using the Box-Behnken design
235
Development of a high performance liquid chromatography/mass spectroscopy method for the determination of strychnine concentrations in insects used to assess potential risks to insectivores
236
Development of a high performance size exclusion chromatography method to determine the stability of Human Serum Albumin in a lyophilized formulation of Interferon alfa-2b
237
Development of a high power diplexer with short-slotted metal half mirrors for electron cyclotron current drive
238
Development of a high precision flexure-based microgripper
239
Development of a high repetition rate Nd:YAG slab laser and soft X-ray generation by cryogenic target
240
Development of a high resolution runoff routing model, calibration and application to assess runoff from the LMD TGCM
241
Development of a high resolution UV spectrophotometer for at-line monitoring of bioprocesses
242
Development of a high sensitive automatic setup for screening of microcystins in surface waters by employing a LED-based photometric detector
243
Development of a high spatial resolution SQUID magnetometer for biomagnetic measurement
244
Development of a high strength Al–Mg2Si–Mg–Zn based alloy for high pressure die casting
245
Development of a high strength high toughness ausferritic steel
246
Development of a high temperature Cf/XSi2–SiC (X = Mo, Ti) composite via reactive melt infiltration
247
Development of a high throughput 96-well plate sample preparation method for the determination of trileptal (oxcarbazepine) and its metabolites in human plasma
248
Development of a high throughput cross-flow filtration system for detailed investigation of fouling processes
249
Development of a high throughput screening tool for biotransformations utilising a thermophilic l-aminoacylase enzyme
250
Development of a high throughput, quantitative assay of the effects of fungal-derived griseofulvin and cordycepin, and butyrate on the cytoskeleton
251
Development of a high torque–high power spindle system equipped with a synchronous motor for high performance cutting
252
Development of a high yield and low cycle time biomass char production system
253
Development of a high-density position decoder circuit for GAPD-based PET with a large number of readout channels
254
Development of a high-density position decoder circuit for GAPD-based PET with a large number of readout channels
255
Development of a high-efficiency high-resolution imaging detector for 30–80 keV X-rays
256
Development of a high-efficiency high-resolution imaging detector for 30–80 keV X-rays
257
Development of a high-efficiency hydrogen generator for fuel cells for distributed power generation
258
Development of a high-efficiency modeling technique for weld-bonded steel joints in vehicle structures, Part II: Dynamic experiments and simulations
259
Development of a high-efficiency pulsed slow positron beam for measurements with orthopositronium in vacuum
260
Development of a high-efficiency pulsed slow positron beam for measurements with orthopositronium in vacuum
261
Development of a higher order finite element on a Winkler foundation
262
Development of a higher-order accurate kinetic wave/particle flux-splitting algorithm for the Euler equations Original Research Article
263
Development of a highly compact steam generator
264
Development of a highly efficient low-emission diesel engine-powered co-generation system and its optimization using Taguchi method
265
Development of a highly efficient system for assessing recombinant gene expression in plant cell suspensions via Agrobacterium tumefaciens transformation
266
Development of a Highly Flexible Incremental Roll Forming Process for the Manufacture of a Doubly Curved Sheet Metal
267
Development of a highly hydrophilic nanofiltration membrane for desalination and water treatment Original Research Article
268
Development of a highly intense state-selected CH radical beam source for the study on the collision energy dependent reaction dynamics
269
Development of a highly reliable helium refrigeration system––R&D of a highly reliable helium refrigeration system (conventional type) Original Research Article
270
Development of a highly reliable helium refrigeration system––R&D of a highly reliable helium refrigeration system (oil-free type) Original Research Article
271
Development of a highly robust solid phase microextraction fiber based on crosslinked methyl methacrylate–polyhedral oligomeric silsesquioxane hybrid polymeric coating Original Research Article
272
Development of a highly selective EP2-receptor agonist. Part 1: identification of 16-hydroxy-17,17-trimethylene PGE2 derivatives Original Research Article
273
Development of a highly selective EP2-receptor agonist. Part 2: identification of 16-Hydroxy-17,17-trimethylene 9β-chloro PGF derivatives Original Research Article
274
Development of a highly selective voltammetric sensor for nanomolar detection of mercury ions using glassy carbon electrode modified with a novel ion imprinted polymeric nanobeads and multi-wall carbon nanotubes
275
Development of a highly sensitive analytical technique for surfactants by time-of-flight secondary ion mass spectrometry
276
Development of a highly sensitive and robust Cor a 9 specific enzyme-linked immunosorbent assay for the detection of hazelnut traces Original Research Article
277
Development of a highly sensitive and selective hyphenated technique (molecularly imprinted micro-solid phase extraction fiber–molecularly imprinted polymer fiber sensor) for ultratrace analysis of folic acid Original Research Article
278
Development of a highly sensitive and selective mercury optical sensor based on immobilization of bis(thiophenal)-4,4′-methylenedianiline on a PVC membrane
279
Development of a highly sensitive and selective optical chemical sensor for batch and flow-through determination of mercury ion
280
Development of a highly sensitive and selective optical sensor for determination of ultra-trace amount of silver ions
281
Development of a highly sensitive and specific enzyme-linked immunosorbent assay (ELISA) for the detection of phenylethanolamine A in tissue and feed samples and confirmed by liquid chromatography tandem mass spectrometry (LC–MS/MS)
282
Development of a highly sensitive and specific monoclonal antibody-based enzyme-linked immunosorbent assay (ELISA) for detection of Sudan I in food samples
283
Development of a highly sensitive and specific monoclonal antibody-based enzyme-linked immunosorbent assay for determination of doxycycline in chicken muscle, liver and egg
284
Development of a highly sensitive enzyme immunoassay for human calcitonin using solid phase coupled with multiple antibodies
285
Development of a highly sensitive enzyme-linked immunosorbent assay for atrazine Performance evaluation by flow injection immunoassay
286
Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone
287
Development of a highly sensitive inhibition immunoassay for microcystin-LR
288
Development of a highly sensitive inhibition immunoassay for microcystin-LR Original Research Article
289
Development of a highly sensitive method for the quantification of estrone and estradiol in serum by liquid chromatography tandem mass spectrometry without derivatization
290
Development of a highly sensitive MIP based-QCM nanosensor for selective determination of cholic acid level in body fluids
291
Development of a highly sensitive porous Si-based hydrogen sensor using Pd nano-structures
292
Development of a highly sensitive, field operable biosensor for serological studies of Ebola virus in central Africa
293
Development of a highly sensitive, second antibody format chemiluminescence enzyme immunoassay for the determination of 17β-estradiol in wastewater Original Research Article
294
Development of a highly water-soluble peptide-based human neutrophil elastase inhibitor; AE-3763 for treatment of acute organ injury Original Research Article
295
Development of a highly α-regioselective indium-mediated allylation reaction in water
296
Development of a highly α-selective galactopyranosyl donor based on a rational design
297
Development of a high-performance angle-resolving electron energy analyzer
298
Development of a high-performance gantry system for a new generation of optical slope measuring profilers
299
Development of a high-performance gantry system for a new generation of optical slope measuring profilers
300
Development of a high-performance immunolatex based on “soft landing” antibody immobilization mechanism
301
Development of a high-performance laser-guided deep-hole boring tool:: Optimal determination of reference origin for precise guiding
302
Development of a high-performance lead–acid battery for new-generation vehicles
303
Development of a high-performance liquid chromatographic method for bioanalytical applications with sulpiride
304
Development of a high-performance liquid chromatographic method for bioequivalence study of flavoxate tablets
305
Development of a high-performance liquid chromatographic method for the determination of 11-keto-β-boswellic acid in human plasma
306
Development of a high-performance liquid chromatographic method for the determination of a new potent radioiodinated melanoma imaging and therapeutic agent
307
Development of a high-performance liquid chromatographic method for the quantification of chlorpyrifos, pyridostigmine bromide, N,N-diethyl-m-toluamide and their metabolites in rat plasma and urine
308
Development of a high-performance liquid chromatographic method to determine the concentration of karenitecin, a novel highly lipophilic camptothecin derivative, in human plasma and urine
309
Development of a high-performance liquid chromatographic method with electrochemical detection for the determination of hyperforin
310
Development of a high-performance liquid chromatographic–mass spectrometric assay for the specific and sensitive quantification of Ro 64-0802, an anti-influenza drug, and its pro-drug, oseltamivir, in human and animal plasma and urine
311
Development of a high-performance liquid chromatographic–mass spectrometric method for the determination of cellular levels of the tyrosine kinase inhibitors lapatinib and dasatinib
312
Development of a high-performance liquid chromatographic–tandem mass spectrometric method for the determination of pharmacokinetics of Co 102862 in mouse, rat, monkey and dog plasma
313
Development of a high-performance liquid chromatography carbon column based method for the fractionation of dioxin-like polychlorinated biphenyls
314
Development of a high-performance liquid chromatography method for the determination of caspofungin with amperometric detection and its application to in vitro microdialysis experiments
315
Development of a high-performance liquid chromatography method for the simultaneous quantification of four organoarsenic compounds in the feeds of swine and chicken
316
Development of a high-performance liquid chromatography method for the simultaneous quantification of quinoxaline-2-carboxylic acid and methyl-3-quinoxaline-2-carboxylic acid in animal tissues
317
Development of a high-performance liquid chromatography method for warfarin detection in human plasma
318
Development of a high-performance liquid chromatography method to monitor the residues of benzimidazoles in bovine milk
319
Development of a high-performance liquid chromatography–electrospray ionization-quadrupole-time-of-flight-mass spectrometry methodology for the determination of three highly antihypertensive peptides in maize crops
320
Development of a high-performance liquid chromatography-fluorescence detection method for analyzing nonylphenol/dinonylphenol-polyethoxylate-based phosphate esters
321
Development of a high-performance liquid chromatography–tandem mass spectrometry method for the determination of flurogestone acetate in ovine plasma
322
Development of a High-Performance Magnetic Gear
323
Development of a high-performance microstrip gas chamber with a capability of track discrimination for neutron detection
324
Development of a high-performance microstrip gas chamber with a capability of track discrimination for neutron detection
325
Development of a high-performance PEFC module operated by reformed gas
326
Development of a High-Porosity Fixed-Abrasive Pad Utilizing Catalytic Effects of TiO2 on Polyurethane Matrix
327
Development of a high-power lithium-ion battery
328
Development of a high-power solid-state switch using static induction thyristors for a klystron modulator
329
Development of a high-power solid-state switch using static induction thyristors for a klystron modulator
330
Development of a high-power THz radiation source for plasma diagnostics
331
Development of a high-precision image-processing automatic measurement system for MRI visceral fat images acquired using a binomial RF-excitation pulse
332
Development of a high-precision, wear-resistant micro-holes structure
333
Development of a high-range gamma ion chamber for space critical applications
334
Development of a high-range gamma ion chamber for space critical applications
335
Development of a high-rate high-resolution detector for EXAFS experiments
336
Development of a high-resolution (1 km × 1 km, 1 h) emission model for Spain: The High-Elective Resolution Modelling Emission System (HERMES)
337
Development of a high-resolution alpha camera
338
Development of a high-resolution alpha camera
339
Development of a high-resolution emission inventory for Spain using the SMOKE modelling system: A case study for the years 2000 and 2010
340
Development of a high-resolution hyperbolic model on quadratic elements Original Research Article
341
Development of a high-resolution measurement technique of the interval between bunches in a linac with coherent transition radiation
342
Development of a high-resolution measurement technique of the interval between bunches in a linac with coherent transition radiation
343
Development of a high-resolution melt-based assay to rapidly detect the azole-resistant Candida auris isolates
344
Development of a High-resolution Melting Analysis Method Based on SYBR Green-I for rs7216389 Locus Genotyping in Asthmatic Child Patients
345
Development of a High-Resolution Melting Method for Screening R188H Polymorphism in XRCC2 Gene
346
Development of a High-Resolution Nested Air Pollution Model: The Numerical Approach
347
Development of a high-sensitivity chromatographic separation system for pyridylaminated aldopentoses and aldohexoses
348
Development of a high-sensitivity nested PCR assay for the detection of Clostridium piliforme in clinical samples
349
Development of a high-sensitivity quantitative analytical method for determining polycarbamate by gas chromatography-mass spectrometry incorporating temperature-programmable inlet on-column injection
350
Development of a high-speed camera system for neutron imaging at a pulsed neutron source
351
Development of a high-speed camera system for neutron imaging at a pulsed neutron source
352
Development of a high-speed CNC cutting machine using linear motors
353
Development of a high-speed cryogenic tribometer: Design concept and experimental results
354
Development of a High-Speed Manufacturing Method for Electroplated Diamond Wire Tools
355
Development of a high-speed single-photon pixellated detector for visible wavelengths
356
Development of a high-speed single-photon pixellated detector for visible wavelengths
357
Development of a high-speed switching system for distribution networks
358
Development of a high-temperature air-blown gasification system
359
Development of a high-throughput enzyme-linked immunosorbent assay for the routine detection of the carcinogen acrylamide in food, via rapid derivatisation pre-analysis Original Research Article
360
Development of a high-throughput LC/APCI-MS method for the determination of thirteen phytoestrogens including gut microbial metabolites in human urine and serum
361
Development of a high-throughput method for the determination of ethosuximide in human plasma by liquid chromatography mass spectrometry
362
Development of a high-throughput method for the determination of organochlorinated compounds, nitromusks and pyrethroid insecticides in indoor dust
363
Development of a high-throughput screening assay for stearoyl-CoA desaturase using rat liver microsomes, deuterium labeled stearoyl-CoA and mass spectrometry Original Research Article
364
Development of a high-throughput screening method for racemase activity and its application to the identification of alanine racemase variants with activity towards l-arginine
365
Development of a high-throughput thermoelectric screening tool for combinatorial thin film libraries
366
Development of a high-throughput ultra performance liquid chromatography–mass spectrometry assay to profile 18 eicosanoids as exploratory biomarkers for atherosclerotic diseases
367
Development of a highway noise prediction model using an Leq20 s measure of basic vehicular noise
368
Development of a highway traffic noise prediction model that considers various road surface types
369
Development of a High-Yield Process for Scalable Extraction of Beta-Glucan from Baker’s Yeast
370
Development of a hip wear simulation rig including micro-separation
371
Development of a hollow cylinder test for the elastic modulus distribution and the ultimate strength of bamboo
372
Development of a hollow fiber membrane module for using implantable artificial lung
373
Development of a hollow fibre liquid phase microextraction method to monitor the sonochemical degradation of explosives in water
374
Development of a hollow fibre liquid phase microextraction method to monitor the sonochemical degradation of explosives in water Original Research Article
375
Development of a holographic sensor for the detection of calcium dipicolinate—A sensitive biomarker for bacterial spores
376
Development of a home enteral nutrition (HEN) patient database for Sydney West Area Health Service
377
Development of a home-made extraction device for vortex-assisted surfactant-enhanced-emulsification liquid–liquid microextraction with lighter than water organic solvents
378
DEVELOPMENT OF A HOMOGENEOUS PHOSPHORESCENT IMMUNOASSAY FOR THE DETECTION OF POLYCHLORINATED DIBENZOp-DIOXINS
379
Development of a homogeneous pulse shape discriminating flow-cell radiation detection system
380
Development of a homogeneous pulse shape discriminating flow-cell radiation detection system
381
Development of a Hookah Smoking Obscenity Measurement Scale for Adolescents
382
Development of a horizontally and vertically focused neutron monochromator using stacked elastically bent Si single crystals
383
Development of a horizontally and vertically focused neutron monochromator using stacked elastically bent Si single crystals
384
Development of a hot tear indicator for steel castings
385
Development of a hot water reconstitutable appetizer soup mix from Coleus aromaticus using response surface methodology
386
Development of a housing performance evaluation model for multi-family residential buildings in Korea
387
Development of a HTS magnet and application to a beam scanner
388
Development of a HTS magnet and application to a beam scanner
389
Development of a Human Light Chain Variable Domain (VL) Intracellular Antibody Specific for the Amino Terminus of Huntingtin via Yeast Surface Display
390
Development of a Humidification–Dehumidification System in a Quonset Greenhouse for Sustainable Crop Production in Arid Regions
391
Development of a hybrid battery system for an implantable biomedical device, especially a defibrillator/cardioverter (ICD)
392
Development of a hybrid coating process as an advanced surface modification for cutting tools and moulds
393
Development of a hybrid coating process for deposition of diamond-like carbon films on microdrills
394
Development of a hybrid compressed gas engine/PEFC power system using the dissociation expansion characteristics of gas hydrate
395
Development of a hybrid computer model for simulating the complicated virtual sound field in enclosures
396
Development of a hybrid fermentation–enzymatic bioprocess for the production of ethyl lactate from dairy waste
397
Development of a hybrid finite element model for individual simulation of intertrochanteric osteotomies
398
Development of a hybrid helical microwiggler with four poles per period
399
Development of a hybrid image processing algorithm for automatic evaluation of intramuscular fat content in beef M. longissimus dorsi
400
Development of a hybrid margin angle controller for HVDC continuous operation
401
Development of a hybrid meta-heuristic algorithm for combinatorial optimisation and its application for optimal design of laminated composite cylindrical skirt
402
Development of a hybrid method for estimating land surface shortwave net radiation from MODIS data
403
Development of a hybrid methodology for dimensionality reduction in Mahalanobis–Taguchi system using Mahalanobis distance and binary particle swarm optimization
404
Development of a hybrid MSGC detector for thermal neutron imaging with a MHz data acquisition and histogramming system
405
Development of a hybrid MSGC detector for thermal neutron imaging with a MHz data acquisition and histogramming system
406
Development of a hybrid neural network system for prediction of process parameters in injection moulding
407
Development of a hybrid photo-diode and its front-end electronics for the BTEV experiment
408
Development of a hybrid photo-diode and its front-end electronics for the BTEV experiment
409
Development of a hybrid phototube with ZnO:Ga luminescent screen and GaN photocathode
410
Development of a hybrid phototube with ZnO:Ga luminescent screen and GaN photocathode
411
Development of a hybrid PIG-ECR ion source
412
Development of a hybrid pneumatic-power vehicle
413
Development of a hybrid refrigerator combining thermoelectric and vapor compression technologies
414
Development of a hybrid sectional quadrature-based moment method for solving population balance equations
415
Development of a hybrid vibration experiment system for determining wind-induced responses of buildings with tuned dampers
416
Development of a hybrid pneumatic-power vehicle
417
Development of a Hybridized Model for Predicting the Life Span of Power Transformers
418
Development of a Hydraulic Circulation Sub as a Tool to Prevent Mud Losses During Well Drilling
419
Development of a hydraulic control mechanism for cyclic pitch marine current turbines
420
Development of a hydrodynamic model of the Bay of Biscay. Validation of hydrology
421
Development of a hydrogen absorbing layer in the outer shell of high pressure hydrogen tanks
422
Development of a hydrogen catalytic heater for heating metal hydride hydrogen storage systems
423
Development of a hydrogen fuelling infrastructure in the Northeast U.S.A.
424
Development of a hydrogen permeation sensor for future tritium applications
425
Development of a Hydrogen Selective Ceramic Membrane and Its Application for the Conversion of Greenhouse Gases
426
Development of a hydrometallurgical route for the recovery of zinc and manganese from spent alkaline batteries
427
Development of a hydrophilic interaction chromatography–mass spectrometry assay for spectinomycin and lincomycin in liquid hog manure supernatant and run-off from cropland
428
Development of a hydrophilic interaction liquid chromatography–mass spectrometry method for detection and quantification of urea thermal decomposition by-products in emission from diesel engine employing selective catalytic reduction technology
429
Development of a hydrophilic PES ultrafiltration membrane containing SiO2@N-Halamine nanoparticles with both organic antifouling and antibacterial properties Original Research Article
430
Development of a hydrophilic polymer membrane containing silver nanoparticles with both organic antifouling and antibacterial properties
431
Development of a hydrothermal time seed germination model which uses the Weibull distribution to describe base water potential
432
Development of a hydrothermal time seed germination model which uses the Weibull distribution to describe base water potential
433
Development of a hydroxyl radical ratiometric nanoprobe
434
Development of a hyena immunology toolbox
435
Development of a hyena immunology toolbox
436
Development of a hyperparasitoid wasp in different stages of its primary parasitoid and secondary herbivore hosts
437
Development of a Hyphenated Method Called DLLME/TLM for Trace Analysis of Cd
438
Development of a hyphenated procedure of heat-reflux and ultrasound-assisted extraction followed by RP-HPLC separation for the determination of three flavonoids content in Scutellaria barbata D. Don
439
Development of a IRSN code for dust mobilisation problems in ITER
440
Development of a jar testing protocol for chemical phosphorus removal in activated sludge using statistical experimental design
441
Development of a Joint Economic Lot Size Model for Vendor-Buyer with Normal Demand and Empirical Delivery Time with Service level and Incremental Discount
442
Development of a joint economic lot size model with stochastic demand within non-equal shipments
443
Development of a J-shaped pneumatic valve to control the solid particle circulation rate in a circulating fluidized bed
444
Development of a KBS for personal financial planning guided by pragmatic KADS
445
Development of a kinematically focused neutron source with the p(7Li,n)7Be inverse reaction
446
Development of a kinematically focused neutron source with the p(7Li,n)7Be inverse reaction
447
Development of a kinetic basis for bioavailability of sorbed naphthalene in soil slurries
448
Development of a kinetic model for bainitic isothermal transformation in transformation-induced plasticity steels Original Research Article
449
Development of a kinetic model for Fischer–Tropsch synthesis over Co/Ni/Al2O3 catalyst
450
Development of a knowledge base as a tool for contextualized learning
451
Development of a knowledge base for ESOL teacher education
452
Development of a knowledge based hybrid neural network (KBHNN) for studying the effect of diafiltration during ultrafiltration of whey Original Research Article
453
Development of a knowledge based multimedia DBMS schema architecture
454
Development of a knowledge management initiative and system: A case study
455
Development of a knowledge scale about breast cancer and heredity (BCHK)
456
Development of a knowledge scale about breast cancer and heredity (BCHK)
457
Development of a knowledge-based expert system for solving metal cutting problems
458
Development of a knowledge-based self-assessment system for measuring organisational performance
459
Development of a Korean HyperthyroidismSpecific Health Status Scale
460
Development of a k–ε model for the determination of air exchange rates for street canyons
461
Development of a label-free electrochemical immunosensor based on carbon nanotube for rapid determination of clenbuterol
462
Development of a laboratory AC-DC simulator for on-line control study
463
Development of a Laboratory Clarifier Test to Predict Full Scale Primary Clarifier Performance
464
Development of a laboratory exposure system using marine fish to carry out realistic effect studies with produced water discharged from offshore oil production
465
Development of a laboratory method to predict plant flash flotation performance
466
Development of a laboratory model of activated charcoal–nitrogen adsorption cryocooler Original Research Article
467
Development of a laboratory model screw press for peanut oil expression Original Research Article
468
Development of a laboratory spectral backscattering instrument: design and simulation
469
Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam
470
Development of a laboratory test to characterise the behaviour of free gold for use in a combined flash flotation and gravity concentrator model
471
Development of a lab-scale, high-resolution, tube-generated X-ray computed-tomography system for three-dimensional (3D) materials characterization
472
Development of a laccase/syringaldazine system for NAD(P)H oxidation
473
Development of a laccase-based flow injection electrochemical biosensor for the determination of phenolic compounds and its application for monitoring remediation of Kraft E1 paper mill effluent Original Research Article
474
Development of a Lake Eutrophication model
475
Development of a Lake Eutrophication model
476
Development of a land use extraction expert system through morphological and spatial arrangement analysis
477
Development of a land use extraction expert system through morphological and spatial arrangement analysis
478
Development of a Laplacian-based mesh generator for ALE calculations in rotary volumetric pumps and compressors Original Research Article
479
Development of a large area photodetector with a fast phosphor anode
480
Development of a large area photodetector with a fast phosphor anode
481
Development of a large area, curved two-dimensional detector for single-crystal neutron diffraction studies
482
Development of a large area, curved two-dimensional detector for single-crystal neutron diffraction studies
483
Development of a large format charge-coupled device (CCD) for applications in X-ray astronomy
484
Development of a large format charge-coupled device (CCD) for applications in X-ray astronomy
485
Development of a large high-performance 2-D array of GaAs-AlGaAs multiple quantum-well modulators
486
Development of a large sonochemical reactor at a high frequency
487
Development of a large titanium bone chamber to study in vivo bone ingrowth
488
Development of a large volume zero boil-off liquid xenon storage system for muon rare decay experiment (MEG) Original Research Article
489
Development of a large-area aerogel Čherenkov counter onboard BESS
490
Development of a large-area aerogel Čherenkov counter onboard BESS
491
Development of a large-area monolithic 4×4 MPPC array for a future PET scanner employing pixelized Ce:LYSO and Pr:LuAG crystals
492
Development of a large-area monolithic 4×4 MPPC array for a future PET scanner employing pixelized Ce:LYSO and Pr:LuAG crystals
493
Development of a large-scale TEG for evaluation and analysis of yield and variation
494
Development of a large-sized, long-life, valve-regulated lead–acid battery
495
Development of a large-volume, membrane-based injection system for gradient elution micro-liquid chromatography
496
Development of a Laser Ablation System Kit (LASK) for Tokamak in vessel tritium and dust inventory control
497
Development of a laser displacement probe to measure particle impact velocities in vibrationally fluidized granular flows
498
Development of a Laser IInterferometric Dilatometer for Measurements of Thermal Expansion of Solids in the Temperature Range 300 to 1300 K
499
Development of a laser in situ airborne hygrometer (LISAH)
500
Development of a laser Raman spectrometer for deep-ocean science
501
Development of a laser shock adhesion test for the assessment of weak adhesive bonded CFRP structures
502
Development of a laser wire beam profile monitor (2)
503
Development of a laser wire beam profile monitor (2)
504
Development of a laser-induced fluorescence imaging system for root activity and rhizosphere visualisation
505
Development of a laser-induced plasma probe to measure gas phase plasma signals at high pressures and temperatures
506
Development of a laser-induced plasma probe to measure gas phase plasma signals at high pressures and temperatures
507
Development of a laser-produced plasma target for beam–plasma interaction researches
508
Development of a laser-produced plasma target for beam–plasma interaction researches
509
Development of a Laser-Scattering-Based Probe for On-Line Measurement of Surface Roughness
510
Development of a Lateral Flow Immunoassay Using Recombinant Dense Granular Antigen (GRA) 7 to Detect AntiToxoplasma gondii IgG Antibodies
511
Development of a Latex Agglutination Test as a Simple and Rapid Method for Diagnosis of Trichomonas vaginalis Infection
512
Development of a LC/MS/MS method for the analysis of cannabinoids in human EDTA-plasma and urine after small doses of Cannabis sativa extracts
513
Development of a LC/MS/MS method to analyze butyrylcholinesterase inhibition resulting from multiple pesticide exposure
514
Development of a LC-MS/MS Method for the Determination of Narcotic Drugs and Psychotropic Substances in Human Hair
515
Development of a LC–MS/MS method to monitor palmitoyl peptides content in anti-wrinkle cosmetics Original Research Article
516
Development of a leaching protocol for concrete
517
Development of a lead-acid battery for a hybrid electric vehicle
518
Development of a Leaf-Level Canopy Assimilation Model for CERES-Maize
519
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method
520
Development of a lens-coupled CMOS detector for an X-ray inspection system
521
Development of a lens-coupled CMOS detector for an X-ray inspection system
522
Development of a Lesion-Mimic Phenotype in a Transgenic Wheat Line Overexpressing Genes for Pathogenesis-Related (PR) Proteins Is Dependent on Salicylic Acid Concentration
523
Development of a Level 1 Track Trigger for the CMS experiment at the high-luminosity LHC
524
Development of a Level 1 Track Trigger for the CMS experiment at the high-luminosity LHC
525
Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy – Application to a nickel-base superalloy
526
Development of a Life Cycle Assessment Program for building (SUSB-LCA) in South Korea
527
Development of a life cycle assessment tool for construction and maintenance of asphalt pavements
528
Development of a life cycle cost estimate system for structures of light rail transit infrastructure
529
Development of a light readout based on silicon photomultipliers for a wavelength-shifting fibre gamma camera
530
Development of a light readout based on silicon photomultipliers for a wavelength-shifting fibre gamma camera
531
Development of a light scatter sensor technology for on-line monitoring of milk coagulation and whey separation Original Research Article
532
Development of a lightweight and adaptable multiple-axis hand prosthesis
533
Development of a lightweight deployable/stowable radiator for interplanetary exploration
534
Development of a lightweight epoxy asphalt mixture for bridge decks
535
Development of a lightweight fuel cell vehicle
536
Development of a lightweight low-current 10 K 4 T magnet for space-flight ADRs Original Research Article
537
Development of a lightweight space debris shield using high strength fibers
538
Development of a Likert Type Attitude Scale in Health Sciences
539
Development of a linear brushless DC motor drive with robust position control
540
Development of a Linear Corona Torch Discharge
541
Development of a linear dominance hierarchy in nestling birds
542
Development of a linear electrostrictive servo motor
543
Development of a linear motion antenna for the JT-60SA ECRF system
544
Development of a linear predictive model for carbon dioxide sequestration in deep saline carbonate aquifers
545
Development of a line-narrowed and frequency-stabilized TDL system for sub-Doppler molecular spectroscopy
546
Development of a lion-specific interferon-gamma assay
547
Development of a lion-specific interferon-gamma assay
548
Development of a lipid profiling system using reverse-phase liquid chromatography coupled to high-resolution mass spectrometry with rapid polarity switching and an automated lipid identification software
549
Development of a lipid-rich, soft plaque in rabbits, monitored by histology and intravascular ultrasound
550
Development of a liquid 3He target for experimental studies of antikaon–nucleon interaction at J-PARC
551
Development of a liquid 3He target for experimental studies of antikaon–nucleon interaction at J-PARC
552
Development of a liquid chromatographic method for bioanalytical applications with sildenafil
553
Development of a liquid chromatographic–tandem mass spectrometric method with precolumn derivatization for the determination of dencichine in rat plasma Original Research Article
554
Development of a liquid chromatography method for the determination of linezolid and its application to in vitro and human microdialysis samples
555
Development of a liquid chromatography tandem mass spectrometry method for simultaneous determination of eight adulterants in slimming functional foods
556
Development of a liquid chromatography tandem mass spectrometry method for trace analysis of trisiloxane surfactants in the aqueous environment: An alternative strategy for quantification of ethoxylated surfactants
557
Development of a liquid chromatography/negative-ion electrospray tandem mass spectrometry assay for the determination of cilnidipine in human plasma and its application to a bioequivalence study
558
Development of a liquid chromatography/tandem mass spectrometry assay for the determination of bestatin in rat plasma and its application to a pharmacokinetic study
559
Development of a liquid chromatography-based screening methodology for proteolytic enzyme activity
560
Development of a liquid chromatography–electrospray chemical ionization tandem mass spectrometry analytical method for analysis of eleven hydroxylated polybrominated diphenyl ethers
561
Development of a liquid chromatography–electrospray ionization tandem mass spectrometry (LC–ESI MS/MS) method for the quantification of bioactive substances present in olive oil mill wastewaters Original Research Article
562
Development of a liquid chromatography–electrospray mass spectrometric method for the simultaneous analysis of benzoxazolinones and their degradation products
563
Development of a Liquid Chromatography-Electrospray-Tandem Mass Spectrometry Method for the Quantitative Determination of Benzoxazinone Derivatives in Plants
564
Development of a liquid chromatography–mass spectrometric method for measuring the binding of memantine to different melanins
565
Development of a liquid chromatography–mass spectrometry (LC/MS) assay method for the quantification of PSC 833 (Valspodar) in rat plasma
566
Development of a liquid chromatography–mass spectrometry method for monitoring the angiotensin-converting enzyme inhibitor lisinopril in serum
567
Development of a liquid chromatography–mass spectrometry method for the high-accuracy determination of creatinine in serum
568
Development of a liquid chromatography–tandem mass spectrometric method for the determination of methamphetamine and amphetamine using small volumes of rat serum
569
Development of a liquid chromatography–tandem mass spectrometry assay of six antimicrobials in plasma for pharmacokinetic studies in premature infants
570
Development of a liquid chromatography–tandem mass spectrometry method for the determination of 23 endogenous steroids in small quantities of primate urine
571
Development of a liquid chromatography–tandem mass spectrometry method for the identification of natural androgen steroids and their conjugates in urine samples
572
Development of a liquid chromatography–tandem mass spectrometry method for the identification of natural androgen steroids and their conjugates in urine samples Original Research Article
573
Development of a liquid chromatography–tandem mass spectrometry procedure for determination of endocrine disrupting compounds in fish from Mediterranean rivers
574
Development of a liquid chromatography-tandem mass spectrometry with pressurized liquid extraction for determination of glucocorticoid residues in edible tissues
575
Development of a liquid chromatography–tandem mass spectrometry with pressurized liquid extraction method for the determination of benzimidazole residues in edible tissues
576
Development of a liquid chromatography–tandem mass spectrometry with ultrasound-assisted extraction and auto solid-phase clean-up method for the determination of Fusarium toxins in animal derived foods
577
Development of a liquid chromatography–tandem mass spectrometry with ultrasound-assisted extraction method for the simultaneous determination of sudan dyes and their metabolites in the edible tissues and eggs of food-producing animals
578
Development of a liquid scintillator neutron multiplicity counter (LSMC)
579
Development of a liquid scintillator neutron multiplicity counter (LSMC)
580
Development of a liquid stub tuner for the KSTAR ICRF system
581
Development of a liquid stub tuner for the KSTAR ICRF system
582
Development of a liquid toner for electro-photographic solid freeform fabrication
583
Development of a liquid xenon scintillation detector for a new experiment to search for μ→eγ decays
584
Development of a liquid xenon scintillation detector for a new experiment to search for μ→eγ decays
585
Development of a liquid–chromatography tandem mass spectrometry and ultra-high-performance liquid chromatography high-resolution mass spectrometry method for the quantitative determination of zearalenone and its major metabolites in chicken and pig plasma
586
Development of a liquid–liquid extraction procedure for five 1,4-dihydropyridines calcium channel antagonists from human plasma using experimental design
587
Development of a liquid-xenon photon detector––towards the search for a muon rare decay mode at Paul Scherrer Institute Original Research Article
588
Development of A Literacy-Appropriate Health Education Package to Create Awareness of Periodontal Disease and Diabetes
589
Development of a live, attenuated, potential vaccine strain of R. equi expressing vapA and the virR operon, and virulence assessment in the mouse
590
Development of a live, attenuated, potential vaccine strain of R. equi expressing vapA and the virR operon, and virulence assessment in the mouse
591
Development of a Liver Phantom Based on Computed Tomography Images for Dosimetric Purpose
592
Development of a loading dock safety evaluation tool
593
Development of a load-insensitive ICRH antenna system on TEXTOR
594
Development of a LOCA analysis code for the supercritical-pressure light water cooled reactors
595
Development of a Local Model of Inclusive Education for Students with Special Needs in the Exceptional Education Organization
596
Development of a local real world driving cycle for motorcycles for emission factor measurements
597
Development of a local three-dimensional numerical simulation model for the laser forming process of aluminium components
598
Development of a localized heat treatment system for shape memory alloy wires using an ytterbium fiber laser
599
Development of a localized probabilistic sensitivity method to determine random variable regional importance
600
Development of a localized probabilistic sensitivity method to determine random variable regional importance
601
Development of a locally designed and manufactured small-scale reverse osmosis desalination system Original Research Article
602
Development of a locking femur nail for mice
603
Development of a long life 35 Ah capacity VRLA battery for load-leveling applications
604
Development of a long reach articulated manipulator for ITER in vessel inspection under vacuum and temperature
605
Development of a long-lasting ventricular catheter impregnated with a combination of antibiotics
606
Development of a long-life capillary enzyme bioreactor for the determination of blood glucose
607
Development of a long-term monitoring system based on FBG sensors applied to concrete bridges
608
Development of a long-term stable organic membrane-based thin-film microsensor using new-type substrate surface treatment
609
Development of a long-wavelength fluorescent probe based on quinone–methide-type reaction to detect physiologically significant thiols Original Research Article
610
Development of A Loop-Mediated Isothermal Amplification (LAMP) Assay for Detection of Relapsing Fever Borreliae
611
Development of a loop-mediated isothermal amplification assay for rapid detection of Yersinia enterocolitica via targeting a conserved locus
612
Development of a loop-mediated isothermal amplification assay for the detection of Mycobacterium bovis
613
Development of a loop-mediated isothermal amplification method for rapid mass-screening of sand flies for Leishmania infection
614
Development of a low activation concrete shielding wall by multi-layered structure for a fusion reactor
615
Development of a Low Capital Investment Reactor System: Application for Plant Cell Suspension Culture
616
Development of a low charge-to-mass ratio injector for a RIB linac Original Research Article
617
DEVELOPMENT OF A LOW COST AND SAFE PIV FOR MEAN FLOW VELOCITY AND REYNOLDS STRESS MEASUREMENTS
618
Development of a Low Cost Fuel Cell Inverter System With DSP Control
619
Development of a low cost planar detector for positron emission tomography
620
Development of a low cost planar detector for positron emission tomography
621
Development of a low cost star tracker for the SHEFEX mission
622
Development of a low cost Touch Trigger Probe for CNC Lathes
623
Development of a low cost, GPS-based upgrade to a standard handheld gamma detector for mapping environmental radioactive contamination
624
Development of a low data event timer for monitoring an advancing crack in fracture
625
Development of a low energy particle detector using a superconducting transition edge sensor
626
Development of a low energy particle detector using a superconducting transition edge sensor
627
Development of a low pH cementitious material to enlarge bioreceptivity
628
Development of a low pH fermentation strategy for fumaric acid production by Rhizopus oryzae
629
Development of a low Reynolds number enhanced heat transfer surface using flow visualization techniques
630
Development of a low temperature light paraffin isomerization catalysts with improved resistance to water and sulphur by combinatorial methods Original Research Article
631
Development of a low temperature SQUID gradiometer for magnetic microcalorimeters
632
Development of a low temperature SQUID gradiometer for magnetic microcalorimeters
633
Development of a low-color, color stable, dual cure dental resin
634
Development of a low-cost agricultural remote sensing system based on an autonomous unmanned aerial vehicle (UAV)
635
Development of a low-cost dish solar concentrator and its application in zeolite desorption
636
Development of A Low-Cost Method for Determination of Sulfide Ions in Aluminate Solution of Bayer Process and Sulfide Removal Using Nitrate from It
637
Development of a low-cost portable colorimeter for the estimation of fluoride in drinking water
638
Development of a Low-Cost Trackside System for Weighing in Motion and Wheel Defects Detection
639
Development of a low-cost two-stage technique for production of low-sulphur purified konjac flour
640
Development of a low-energy beam transport system at KBSI heavy-ion accelerator
641
Development of a low-energy beam transport system at KBSI heavy-ion accelerator
642
Development of a low-energy monoenergetic neutron source for applications in low-dose radiobiological and radiochemical research
643
Development of a lower body negative pressure box with an environmental control system for physiological studies Original Research Article
644
Development of a lower confidence limit for the number of signals
645
Development of a low-expansion bond coating for Ni-base superalloys
646
Development of a low-expansion bond coating for Ni-base superalloys
647
Development of a low-level background gamma-ray spectrometer by KRISS
648
Development of a low-level RF control system for PET cyclotron CYCIAE-14
649
Development of a low-level RF control system for PET cyclotron CYCIAE-14
650
Development of a low-moisture-content storage system for brown rice: Storability at decreased moisture contents
651
Development of a low-noise analog front-end ASIC for APD-PET detectors
652
Development of a low-noise analog front-end ASIC for APD-PET detectors
653
Development of a low-noise analog front-end ASIC for CdTe detectors
654
Development of a low-noise analog front-end ASIC for CdTe detectors
655
Development of a low-noise, two-dimensional amplifier array
656
Development of a low-noise, two-dimensional amplifier array
657
Development of a low-power thick-film gas sensor deposited by screen-printing technique onto a micromachined hotplate
658
Development of a low-sodium ready-to-eat desalted cod Original Research Article
659
Development of a low-temperature 3He compressor for superfluid 3He–4He mixtures Original Research Article
660
Development of a low-temperature germanium detector via mechanical cooling with a compact pulse-tube refrigerator
661
Development of a low-temperature germanium detector via mechanical cooling with a compact pulse-tube refrigerator
662
Development of a low-temperature two-stage fluidized bed incinerator for controlling heavy-metal emission in flue gases
663
Development of a LPG fuel processor for PEFC systems: Laboratory scale evaluation of autothermal reforming and preferential oxidation subunits
664
Development of a luminol-based chemiluminescence flow-injection method for the determination of dichlorvos pesticide
665
Development of a lymphocyte-transformation-assay for peripheral blood lymphocytes of the harbor porpoise and detection of cytokines using the reverse-transcription polymerase chain reaction
666
Development of a lymphocyte-transformation-assay for peripheral blood lymphocytes of the harbor porpoise and detection of cytokines using the reverse-transcription polymerase chain reaction
667
Development of a M13 bacteriophage-based SPR detection using Salmonella as a case study
668
DEVELOPMENT OF A MACHINE FOR COLD PULPING OF TOMATO
669
Development of a machine for the automatic sorting of pomegranate (Punica granatum) arils based on computer vision Original Research Article
670
Development of a machine integrated strain-based contact force sensor for pad foot soil compactors
671
Development of a machine learning technique for automatic analysis of seafloor image data: Case example, Pogonophora coverage at mud volcanoes
672
Development of a machine troubleshooting expert system via fuzzy multiattribute decision-making approach
673
Development of a machine vision system for automatic date grading using digital reflective near-infrared imaging Original Research Article
674
Development of a macroinvertebrate multimetric index for the assessment of low-land streams in the neotropics
675
Development of a macrophyte-based index of biotic integrity for Minnesota lakes
676
Development of a maglev lens driving actuator for off-axis control and adjustment of the focal point in laser beam machining
677
Development of a magnesium secondary alloy system for mixed magnesium post-consumer scrap
678
Development of a magnet power supply with sub-ppm ripple performance for J-PARC with a novel common-mode rejection method with an NPC inverter
679
Development of a magnet power supply with sub-ppm ripple performance for J-PARC with a novel common-mode rejection method with an NPC inverter
680
Development of a magnetic bead fluorescence microscopy immunoassay to detect and quantify Leptospira in environmental water samples
681
Development of a magnetic field model and insertion into a commercial electromagnetic simulator
682
Development of a magnetic focusing device for pulsed neutrons
683
Development of a magnetic focusing device for pulsed neutrons
684
Development of a magnetic particle immunoassay for polybrominated diphenyl ethers and application to environmental and food matrices Original Research Article
685
Development of a Magnetic Suspension Densimeter and Measurement of the Density of Toluene
686
Development of a magnetohydrodynamic simulation code satisfying the solenoidal magnetic field condition Original Research Article
687
Development of a magnetospheric state-based trapped radiation database Original Research Article
688
Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring
689
Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring
690
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study
691
Development of a Maize Breakage Test Method using a Commercial Food Processor
692
Development of a major polygonal fault system in Upper Cretaceous chalk and Cenozoic mudrocks of the Sable Subbasin, Canadian Atlantic margin
693
Development of a malaria vaccine
694
Development of a Management Model for a Surface Waterlogged and Drainage Congested Area
695
Development of a mandarin fish Siniperca chuatsi fry cell line suitable for the study of infectious spleen and kidney necrosis virus (ISKNV)
696
Development of a manual method for the determination of mineral oil in foods and paperboard
697
Development of a manufacturing process for Zr-based spacer grid materials
698
Development of a market penetration forecasting model for Hydrogen Fuel Cell Vehicles considering infrastructure and cost reduction effects
699
Development of a marketing information system for supporting sales in a Tea-beverage market
700
Development of a Marking Composition Based on Nanoaluminum and Iron Ore Concentrate for Mixed Explosives and Their Subsequent Identification
701
Development of a Mars dust characterization instrument
702
Development of a maskless electrochemical texturing method
703
Development of a mass spectrometry method for the determination of a melanoma biomarker, 5-S-cysteinyldopa, in human plasma using solid phase extraction for sample clean-up
704
Development of a mass-producible glucose biosensor and flow-injection analysis system suitable for on-line monitoring during fermentations
705
Development of a master sintering curve for ThO2
706
Development of a material balance equation for coalbed methane reservoirs accounting for the presence of water in the coal matrix and coal shrinkage and swelling
707
Development of a mathematical expression for the variation of amorphization phenomenon during intensive milling of minerals
708
Development of a Mathematical Framework for Comparison of Underlay and Overlay Systems
709
Development of a Mathematical Method for Classifying and Comparing Tree Architecture Using Parameters from a Topological Model of a Trifurcating Botanical Tree
710
Development of a mathematical model and simulation of mass transfer of solar ethanol distillation in modified brewery tank
711
Development of a mathematical model by means of experimental design for alkylation of m-cresol with cyclopentene
712
Development of a mathematical model for a curved slat venetian blind with thickness
713
Development of a Mathematical Model for MAP Systems Applied to Nonrespiring Foods
714
Development of a mathematical model for online microextraction by packed sorbent under equilibrium conditions and its application for polycyclic aromatic hydrocarbon determination in water by gas chromatography–mass spectrometry
715
Development of a mathematical model for simulating gas and water vapor exchanges in modified atmosphere packaging with macroscopic perforations Original Research Article
716
Development of a Mathematical Model for Simulation of Macroalgae Farming in the Coastal Areas
717
Development of a Mathematical Model for Sustainable Closed-loop Supply Chain with Efficiency and Resilience Systematic Framework
718
Development of a mathematical model for the growth associated Polyhydroxybutyrate fermentation by Azohydromonas australica and its use for the design of fed-batch cultivation strategies
719
Development of a mathematical model for vacuum cooling of cooked meats Original Research Article
720
Development of a mathematical model that predicts the outcome of hormone therapy for prostate cancer
721
Development of a mathematical model to describe the transport of monocyte chemoattractant protein-1 through a three-dimensional collagen matrix
722
Development of a mathematical model to design an offshore wind and wave hybrid energy system
723
Development of a mathematical model to predict clean water head losses in hydrocyclone filters in drip irrigation systems using dimensional analysis
724
Development of a mathematical model to predict head losses from disc filters in drip irrigation systems using dimensional analysis
725
Development of a mathematical model to study the impacts of production and management policies on the herd dynamics and profitability of dairy goats
726
Development of a Matrix Solid Phase Dispersion methodology for the determination of triazine herbicides in mussels
727
Development of a matrix solid-phase dispersion method for the determination of polycyclic aromatic hydrocarbons in sewage sludge samples Original Research Article
728
Development of a matrix solid-phase dispersion method for the screening of polybrominated diphenyl ethers and polychlorinated biphenyls in biota samples using gas chromatography with electron-capture detection
729
Development of a matrix solid-phase dispersion method for the simultaneous determination of pyrethroid and organochlorinated pesticides in cattle feed
730
Development of a matrix solid-phase dispersion-sonication extraction method for the determination of fungicides residues in ginseng extract
731
Development of a matrix-assisted laser desorption ionization mass spectrometric method for rapid process-monitoring of phthalocyanine compounds Original Research Article
732
Development of a mayonnaise with chitosan as natural antioxidant
733
Development of a McAb-based immunoassay for parathion and influence of the competitor structure
734
Development of a measure model for optimal planning of maintenance and improvement of roads
735
Development of a measure of attitude toward nutrition in patient care Original Research Article
736
Development of a measure to assess coping for auditory hallucinations
737
Development of a measure to assess invalidating childhood environments in the eating disorders
738
Development of a measure to assess quality management in certified firms
739
Development of a measurement system of gap between CSB and RV to shorten a nuclear reactor installation period Original Research Article
740
Development of a measuring method for several types of programmed tool paths for NC machine tools using a laser displacement interferometer and a rotary encoder
741
Development of a measuring technique for simultaneous in situ detection of nanoscaled particle size distributions and gas temperatures
742
Development of a Meat-Like Process Flavoring from Soybean-Based Enzyme-Hydrolyzed Vegetable Protein (E-HVP)
743
Development of a mechanical device for concealing underground urban solid residual containers
744
Development of a mechanical earth model in an Iranian off-shore gas field
745
DEVELOPMENT OF A MECHANICAL FEEDING UNIT SUITABLE FOR ONION SEEDLINGS
746
Development of a mechanical transducer for real-time soil tilth sensing
747
Development of a mechanism for ontology-based product lifecycle knowledge integration
748
Development of a mechanism for transplanting rice seedlings
749
Development of a mechanistic model (ERIMO-I) for analyzing the temporal dynamics of the benthic community of an intermittent Mediterranean stream
750
Development of a mechanistic model (ERIMO-I) for analyzing the temporal dynamics of the benthic community of an intermittent Mediterranean stream
751
Development of a mechanistic model for prediction of emission of trace elements from coal-fired power plants
752
Development of a mechanistic-empirical prediction model for joint spalling distress in concrete pavements
753
Development of a mechatronics laboratory-eliminating barriers to manufacturing instrumentation and control
754
Development of a media literacy education programme for children based on activity theory
755
Development of a Medical CAD/CAM System for Orthopedic Surgery
756
Development of a membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment Original Research Article
757
Development of a Membrane Disinfection System for Closed Hydroponics in a Greenhouse
758
Development of a membrane dispersion micro-absorber for CO2 capture
759
Development of a membrane filtration method for enumeration of Listeria monocytogenes from soft cheese
760
Development of a membrane inlet mass spectrometric method for analysis of air samples
761
Development of a membrane reactor for decomposing hydrogen sulfide into hydrogen using a high-performance amorphous silica membrane
762
Development of a membrane reactor for the partial oxidation of hydrocarbons: direct oxidation of propane to acrolein
763
Development of a membrane respirometer
764
Development of a Membrane-Assisted Fluidized Bed Reactor. 1. Gas Phase Back-Mixing and Bubble-toEmulsion Phase Mass Transfer Using Tracer Injection and Ultrasound Experiments
765
Development of a Membrane-Assisted Fluidized Bed Reactor. 2. Experimental Demonstration and Modeling for the Partial Oxidation of Methanol
766
Development of a membraneless extraction module for the extraction of volatile compounds: Application in the chromatographic analysis of vicinal diketones in beer
767
Development of a mercuric iodide detector array for medical imaging applications
768
Development of a mercury ion-selective optical sensor based on fluorescence quenching of 5,10,15,20tetraphenylporphyrin
769
Development of a mercury ion-selective optical sensor based on fluorescence quenching of 5,10,15,20-tetraphenylporphyrin Original Research Article
770
Development of a mercury optical sensor based on immobilization of 4-(2-pyridylazo)-resorcinol on a triacetylcellulose membrane
771
Development of a meshless hybrid boundary node method for Stokes flows
772
Development of a mesoscopic particle model for synthesis of uranium-ceramic nuclear fuel
773
Development of a Message-Oriented Middleware for a Heterogeneous Distributed Database Systems
774
Development of a metabolic network design and optimization framework incorporating implementation constraints: A succinate production case study
775
Development of a Metabolism Factor for Polycyclic Aromatic Hydrocarbons for Use in Multipathway Risk Assessments of Hazardous Waste Combustion Facilities
776
Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner
777
Development of a metal recovery process from Li-ion battery wastes
778
Development of a metallic/ceramic composite for the deposition of thin-film oxygen transport membrane
779
Development of a metastable phase diagram to describe solidification in undercooled Fe–Co melts
780
Development of a metastable phase diagram to describe solidification in undercooled Fe–Co melts
781
Development of a meteorological illuminance model for daylight computations
782
Development of a methanogenic process to degrade exhaustively the organic fraction of municipal "grey waste" under thermophilic and hyperthermophilic conditions
783
Development of a methanol fuelled reformer for fuel cell applications
784
Development of a method based on inductively coupled plasma-dynamic reaction cell-mass spectrometry for the simultaneous determination of phosphorus, calcium and strontium in bone and dental tissue
785
Development of a method based on inductively coupled plasma-dynamic reaction cell-mass spectrometry for the simultaneous determination of phosphorus, calcium and strontium in bone and dental tissue
786
Development of a method based on on-line reversed phase liquid chromatography and gas chromatography coupled by means of an adsorption–desorption interface for the analysis of selected chiral volatile compounds in methyl jasmonate treated strawberries
787
Development of a method based on particle swarm optimization to solve resource constrained project scheduling problem
788
Development of a method based on sorbent trapping followed by solid-phase microextraction for the determination of synthetic musks in indoor air
789
Development of a Method Based on the Needle-trap Microextraction Filled with Hydroxyapatite and Polyaniline Nanocomposite for Determination of Volatile Organic Compounds in the Air
790
Development of a method employing stable isotope dilution tandem mass spectrometry for the simultaneous measurement of C13- and C12-thyroxine in human serum or plasma
791
DEVELOPMENT OF A METHOD FOR DETERMINING THE SIZE OF CLEARANCE IN SLIDING BEARINGS
792
Development of a Method for a Sensitive Simultaneous Determination of Acetaminophen and Tryptophan in Biological Samples
793
Development of a method for analysing energy, environmental and economic efficiency for an integrated steel plant
794
Development of a method for analysis of Iranian damask rose oil: Combination of gas chromatography–mass spectrometry with Chemometric techniques Original Research Article
795
Development of a method for automatic basso continuo playing
796
Development of a method for biohydrogen production from wheat straw by dark fermentation
797
Development of a method for butter type differentiation by electronic nose technology
798
Development of a method for calculating steady-state equipment sensible heat ratio of direct expansion air conditioning units
799
Development of a method for calculating steady-state equipment sensible heat ratio of direct expansion air conditioning units
800
Development of a method for comprehensive and quantitative analysis of plant hormones by highly sensitive nanoflow liquid chromatography–electrospray ionization-ion trap mass spectrometry Original Research Article
801
Development of a method for concentrating and detecting rotavirus in oysters
802
DEVELOPMENT OF A METHOD FOR DETERMINATION OF VOLATILE ORGANIC COMPOUNDS (C6-C9) BY THERMAL DESORPTION-GAS CHROMATOGRAPHY. APPLICATION TO URBAN AND RURAL ATMOSPHERES.
803
Development of a method for direct visual determination of aflatoxin production by colonies of the Aspergillus flavus group
804
Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions Original Research Article
805
Development of a method for estimating the likelihood of finger flow and lateral flow in Canadian agricultural landscapes
806
Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation
807
Development of a method for fast analysis of phenolic molecular markers in biomass burning particles using high performance liquid chromatography/atmospheric pressure chemical ionisation mass spectrometry
808
Development of a method for generating operational solar radiation maps from satellite data for a tropical environment
809
Development of a method for identification and accurate quantitation of aroma compounds in Chinese Daohuaxiang liquors based on SPME using a sol–gel fibre
810
Development of a method for liquid xenon purification using a cryogenic centrifugal pump Original Research Article
811
Development of a method for measurement of relative solubility of nonionic surfactants
812
Development of a Method for Pb Functionalization and Preparing Immunogenic Complex
813
Development of a method for quantification of hot-spots
814
Development of a method for sample preparation for subsequent identification and measurement of 1,2,3,4-tetrahydroisoquinolines and other potentially neurotoxic compounds by high-performance liquid chromatography with ultraviolet and fluorescence detectio
815
Development of a method for separation of PVC and PET using flame treatment and flotation
816
Development of a method for sequential Si extraction from soils
817
Development of a method for the analysis of drugs of abuse in vitreous humor by capillary electrophoresis with diode array detection (CE–DAD)
818
Development of a method for the analysis of nucleotides from the mantle tissue of the mussel Mytilus galloprovincialis
819
Development of a method for the analysis of PCB Congeners and organochlorine pesticides in blood/serum
820
Development of a method for the analysis of seven banned azo-dyes in chilli and hot chilli food samples by pressurised liquid extraction and liquid chromatography with electrospray ionization-tandem mass spectrometry
821
Development of a method for the analysis of underivatized amino acids by liquid chromatography/tandem mass spectrometry: Application on Standard Reference Material 1649a (urban dust)
822
Development of a method for the determination of 9 currently used cotton pesticides by gas chromatography with electron capture detection
823
Development of a Method for the Determination of Fusarium Fungi on Corn Using Mid-Infrared Spectroscopy with Attenuated Total Reflection and Chemometrics
824
Development of a Method for the Determination of Human Skin Moisture Using a Portable Near-Infrared System
825
Development of a method for the determination of low levels of technetium-99
826
Development of a method for the determination of UV filters in water samples using stir bar sorptive extraction and thermal desorption–gas chromatography–mass spectrometry
827
Development of a method for the efficient release of N-glycans from glycoproteins generating native deglycosylated proteins
828
Development of a method for the identification of azaspiracid in shellfish by liquid chromatography–tandem mass spectrometry
829
Development of a method for the identification of scombroid and common substitute species in seafood products by FINS
830
Development of a Method for the Preparation of α-Azido-Masked Acyl Cyanides, Synthetic Equivalents of N-Protected–C-Activated α-Amino Acids
831
Development of a method for the production of hemicellulosic gels from Sitka spruce
832
Development of a method for the quantification of d-glucaric acid in different varieties of grapefruits by high-performance liquid chromatography and mass spectra
833
Development of a method for the quantification of whey allergen traces in mixed-fruit juices based on liquid chromatography with mass spectrometric detection
834
Development of a method for the simultaneous analysis of anionic and non-ionic surfactants and their carboxylated metabolites in environmental samples by mixed-mode liquid chromatography–mass spectrometry
835
Development of a method for the simultaneous determination of phosphoric and amino acid group containing pesticides by gas chromatography with mass-selective detection: Optimization of the derivatization procedure using an experimental design approach
836
Development of a method for the systematic use of bilinear multivariate calibration methods for the correction of interferences in inductively coupled plasma-mass spectrometry
837
Development of a method for time-resolved measurement of airborne acrolein
838
Development of a method for total plasma thiols measurement using a disposable screen-printed carbon electrode coupled with a MnO2 reactor
839
Development of a method for water determination in lactose
840
Development of a method of evaluating an inventory of fission products for a pebble bed reactor
841
Development of a method of measuring cellular stress in cattle and sheep
842
Development of a method of measuring cellular stress in cattle and sheep
843
Development of a method predicting the oxidative stability of edible oils using 2,2-diphenyl-1-picrylhydrazyl (DPPH)
844
Development of a method to assay the microbial population in heap bioleaching operations
845
Development of a method to determine Ni and Cd in biodiesel by graphite furnace atomic absorption spectrometry
846
Development of a Method to Label Forages used in Passage Rate Studies in the Horse
847
Development of a method to manufacture uncured, no-nitrate/nitrite-added whole muscle jerky
848
Development of a method to measure free and bound ropivacaine in human plasma using equilibrium dialysis and Hydrophilic interaction chromatography coupled to high resolution mass spectrometry
849
Development of a Method to Obtain More Accurate General and Oral Health Related Information Retrospectively
850
Development of a method to predict the heat island potential using remote sensing and GIS data
851
Development of a method to quantify in vitro the synergistic activity of “natural” antimicrobials
852
Development of a method to quantify sucrose in soybean grains
853
Development of a method to recovery and amplification DNA by real-time PCR from commercial vegetable oils
854
Development of a Method to Risk Stratify Patients With Heart Failure for 30-Day Readmission Using Implantable Device Diagnostics
855
Development of a method which discriminates between endogenous and exogenous β-boldenone Original Research Article
856
Development of a Methodology Based on Metal-Catalyzed Oxidation Reactions and Mass Spectrometry To Determine the Metal Binding Sites in Copper Metalloproteins
857
Development of a methodology for a simplified finite element model and optimum design
858
Development of a methodology for assessing the environmental impact of radioactivity in Northern Marine environments
859
Development of a methodology for benchmarking public transportation organisations: a practical tool based on an industry sound methodology
860
Development of a methodology for cost determination of wastewater treatment based on functional diagram
861
Development of a methodology for determination of interface fracture toughness of laminate composites—the 0°/90° pair
862
Development of a methodology for evaluating air pollution options for improving the air quality in Mexico City
863
Development of a methodology for in situ assessment of topsoil dry bulk density
864
Development of a methodology for life cycle building energy ratings
865
Development of a methodology for non-contacting strain measurements in fluid environments using computer vision
866
Development of a methodology for selecting office building upgrading solutions based on a test survey in European buildings
867
Development of a Methodology for the Calculation of Youngʹs Modulus of Eggshell using Vibration Measurements
868
Development of a methodology for the quantification of particle number and gaseous concentrations in a bidirectional bus tunnel and the derivation of emission factors
869
Development of a methodology for the simultaneous determination of inorganic and organolead compounds using supercritical fluid extraction followed by gas chromatography–mass spectrometry and its application to environmental matrices
870
Development of a methodology to characterize radon entry in dwellings
871
Development of a methodology to estimate error in the on-line measurements of blend uniformity in a continuous powder mixing process
872
Development of a Methodology to Identify Crucial Emergency Stations for Quick Relief Response to the Damaged Urban Areas Following an Earthquake (Case Study: Isfahan City Center)
873
Development of a Methodology to Identify Crucial Emergency Stations for Quick Relief Response to the Damaged Urban Areas Following an Earthquake (Case Study: Isfahan City Center)
874
Development of a methodology to optimize the air bleed in PEMFC systems operating with low quality hydrogen
875
Development of a methodology to predict sticky deposits due to the destabilisation of dissolved and colloidal material in papermaking—application to different systems
876
Development of a methodology to quantify tamoxifen and endoxifen in breast cancer patients by micellar liquid chromatography and validation according to the ICH guidelines
877
Development of a methodology to study inhalability in very low windspeed conditions
878
Development of a methodology to study the hydrogen embrittlement of steels by means of the small punch test
879
Development of a Micellar electrokinetic capillary chromatography method for the determination of three drugs employed in the erectile dysfunction therapy
880
Development of a Micellar Electrokinetic Chromatographic Method with Indirect UV Detection for Pregabalin Determination in Serum Samples
881
Development of a micro diamond grinding tool by compound process
882
Development of a micro FEL irradiation system
883
Development of a micro FEL irradiation system
884
Development of a micro flow injection manifold for the determination of orthophosphate
885
Development of a micro gas chromatograph for the analysis of hydrogen isotope gas mixtures in the fusion fuel cycle
886
Development of a micro thermal sensor for real-time monitoring of lubricating oil concentration
887
Development of a micro-array-type electron multiplier
888
Development of a micro-array-type electron multiplier
889
Development of a micro-balance system for dust and water vapour detection in the Mars atmosphere Original Research Article
890
Development of a microbial bioassay for chlorinated and brominated hydrocarbons
891
Development of a microbial fermentation process for detoxification of gossypol in cottonseed meal
892
Development of a microbial process for the recovery of petroleum oil from depleted reservoirs at 91–96 °C
893
Development of a microbioreactor with ecto-nucleoside triphosphate diphosphohydrolase 2 (NTPDase2) immobilized on a polyacrylamide-coated capillary at the outlet
894
Development of a microcalorimeter array for wide energy band X-ray astronomy
895
Development of a microcalorimeter array for wide energy band X-ray astronomy
896
Development of a microcapillary column for detecting targeted messenger RNA molecules
897
Development of A Microchamber Array for Picoliter PCR
898
Development of a microchannel based pasteurizer for energy efficient processing of liquids
899
Development of a microchannel evaporator model for a CO2 air-conditioning system
900
Development of a microchannel reactor concerning steam reforming of methanol
901
Development of a micro-cogeneration laboratory and testing of a natural gas CHP unit based on PEM fuel cells
902
Development of a microconductometric biosniffer for detection of trimethylamine
903
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
904
Development of a micro-drilling burr-control chart for PCB drilling
905
Development of a microelectrode array sensing platform for combination electrochemical and spectrochemical aqueous ion testing
906
Development of a Microemulsion High Performance Liquid Chromatography (MELC) Method for Determination of Salbutamol in Metered-Dose Inhalers (MDIS)
907
Development of a microfabricated electrochemical-cantilever hybrid platform
908
Development of a microfabricated impinger for on-chip gas phase sampling Original Research Article
909
Development of a microfilter separation system coupled with a high dose of powdered activated carbon for advanced water treatment Original Research Article
910
Development of a micro-flame ionization detector using a diffusion flame
911
Development of a microfluidic biosensor for detection of environmental mycobacteria
912
Development of a microfluidic biosensor for detection of environmental mycobacteria
913
Development of a micro-forming system for micro-punching process of micro-hole arrays in brass foil
914
Development of a micro-indentation model simulating different mechanical responses of the fibre/matrix interface
915
Development of a micromachined hazardous gas sensor array
916
Development of a micro-manipulation system having a two-fingered micro-hand
917
Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures
918
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
919
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
920
Development of a micrometeorological model for the estimation of methane flux from paddy fields: Validation with standard direct measurements
921
Development of a micro-planar Ag/AgCl quasi-reference electrode with long-term stability for an amperometric glucose sensor Original Research Article
922
Development of a microporous membrane liquid–liquid extractor for organophosphate esters in human blood plasma: identification of triphenyl phosphate and octyl diphenyl phosphate in donor plasma
923
Development of a micropulverized extraction method for rapid toxicological analysis of methamphetamine in hair
924
Development of a micro-punching machine and study on the influence of vibration machining in micro-EDM
925
Development of a microreactor for the production of hydrogen from ammonia
926
Development of a microreactor-based parallel catalyst analysis system for synthesis gas conversion
927
Development of a Microscale Cell Culture Analog To Probe Naphthalene Toxicity
928
Development of a microscopic activity-based framework for analyzing the potential impacts of transportation control measures on vehicle emissions
929
Development of a micro-spectrometer system for process control application
930
Development of a microtitre plate method for determination of phenol utilization, biofilm formation and respiratory activity by environmental bacterial isolates
931
Development of a microwave assisted extraction method for the analysis of 2,4,6-trichloroanisole in cork stoppers by SIDA–SBSE–GC–MS Original Research Article
932
Development of a microwave-assisted digestion method using ICP-OES to measure metals in gum deposits of internal combustion engines
933
Development of a microwave-assisted extraction for the analysis of phenolic compounds from Rosmarinus officinalis Original Research Article
934
Development of a microwave-enhanced isotopic labelling procedure based on the Eschweiler–Clarke methylation reaction
935
Development of a microwave-type densimeter for slush hydrogen Original Research Article
936
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
937
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
938
Development of a mid-Holocene estuarine basin, Rhine–Meuse mouth area, offshore The Netherlands
939
Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC–ICP-MS
940
Development of a mild method for the extraction of anthraquinones from their aluminum complexes in madder lakes prior to HPLC analysis
941
Development of a Millisecond Pulse-Heating Apparatus
942
Development of a miniature analytical system in a lab-on-valve for determination of trace copper by bead injection spectroscopy
943
Development of a miniature cryogenic fluid circuit and a cryogenic micropump Original Research Article
944
Development of a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA), and its application to Auger photoelectron coincidence spectroscopy (APECS)
945
Development of a miniature STM holder for study of electronic conductance of metal nanowires in UHV–TEM
946
Development of a miniaturized diffusive gradients in thin films (DGT) device Original Research Article
947
Development of a miniaturized polymer electrolyte membrane fuel cell with silicon separators
948
Development of a mini-biogas digester for lighting in India
949
Development of a mini-channel evaporator model using R1234yf as working fluid
950
Development of a Minimally Invasive and Non-invasive Lipolysis Laser System for Effective Fat Reduction
951
Development of a Minimally Invasive Technique for Coronary Revascularization in a Porcine Model
952
Development of a Minimum Data Set (MDS) for C-Section Anesthesia Information Management System (AIMS)
953
Development of a Minimum Data Set (MDS) for dental implants registry
954
development of a minimum data set for drug module of computerized physician order entry system
955
Development of a mix design method for SCC based on the rheological characteristics of paste
956
Development of a mixed film lubrication model in cold rolling
957
Development of a mixed integer programming model for technology development strategy and its application to IGCC technologies
958
Development of a mixed solvent system for the efficient resolution of (R, S)-2-octanol catalyzed by magnetite-immobilized lipase
959
Development of a mixed-mode solid phase extraction method and further gas chromatography mass spectrometry for the analysis of 3-alkyl-2-methoxypyrazines in wine
960
Development of a Mixture Supply System for Machining with Minimal Quantity Lubrication
961
DEVELOPMENT OF A MOBILE APPLICATION FOR CHILDREN’S READING SKILL: LITERASI LINUS (LiLIN) MOBILE APP
962
Development of a mobile fused deposition modeling system with enhanced manufacturing flexibility
963
DEVELOPMENT OF A MOBILE MACHINE FOR PICKING PRICKLY PEAR FRUIT
964
Development of a mobile safety monitoring system for construction sites
965
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
966
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
967
Development of a mobile tracer correlation method for assessment of air emissions from landfills and other area sources
968
Development of a mobile water maker, a sustainable way to produce safe drinking water in developing countries Original Research Article
969
Development of a Mode III fatigue test method and a peel test method for tire specimens
970
Development of a Model and Sensor Based Smart Irrigation System
971
Development of a model based scoring system for diagnosis of canine disseminated intravascular coagulation with independent assessment of sensitivity and specificity
972
Development of a model compatible with solar assisted cylindrical energy storage tank and variation of stored energy with time for different phase change materials
973
Development of a model describing the effect of temperature, water activity and (gel) structure on growth and ochratoxin A production by Aspergillus carbonarius in vitro and evaluation in food matrices of different viscosity Original Research Article
974
Development of a model for assessment of biomaterial encrustation in the upper urinary tract
975
DEVELOPMENT OF A MODEL FOR DETECTION AND ESTIMATION OF DEPTH OF SHALLOW BURIED NON-METALLIC LANDMINE AT MICROWAVE X-BAND FREQUENCY
976
Development of a model for environmental risk assessment of growth promoters
977
Development of a model for environmental risk assessment of growth promoters
978
Development of a Model for Estimation of Sunshine Hour Data for Different Regions of Uganda
979
Development of a model for high precursor conversion efficiency pulsed-pressure chemical vapor deposition (PP-CVD) processing
980
Development of a model for ice core dating based on grain elongation
981
Development of a model for laparoscopic cholecystectomy video assisted training. A randomized study
982
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach
983
Development of a model for membrane filtration of long and flexible macromolecules: Application to predict dextran and linear DNA rejections in ultrafiltration
984
Development of a model for predicting trihalomethanes propagation in water distribution systems
985
Development of a model for radon concentration in indoor air Original Research Article
986
Development of a model for reactive emissions from industrial stacks
987
Development of a Model for Rural Tourism Supply Chain Management: A Case Study of Touristic Villages of Central Mazandaran, Iran
988
Development of a model for serpentine quantification in nickel laterite minerals by infrared spectroscopy
989
Development of a model for the analysis of human behavior in a smart home environment
990
Development of a model for the estimation of photosynthetically active radiation from geostationary satellite data in a tropical environment
991
Development of a model for the lean NOx catalytic reaction with hydrocarbon adsorption and desorption
992
Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations Original Research Article
993
Development of a model for the sintering of PZT multilayer ceramics and their dielectric properties
994
Development of a model for thermoeconomic design and operation optimization of a PEM fuel cell system
995
Development of a Model for Training and Evaluation of Laparoscopic Skills
996
Development of a model of tissue with potentially malignant disorders (PMD) in the hamster cheek pouch to explore the long-term potential therapeutic and/or toxic effects of different therapeutic modalities
997
Development of a model system for touristic hunting revenue collection and allocation
998
Development of a model system to study fuel autoxidation in supercritical media: decomposition kinetics of 2,2′-azobis(isobutyronitrile) in supercritical carbon dioxide
999
Development of a model to calculate asbestos fiber from damaged asbestos slates depending on the degree of damage
1000
Development of a model to describe the compositional growth and dietary lysine requirements of pigs fed ractopamine
