بر اساس عنوان

1
Development of a Mathematical Model for Simulation of Macroalgae Farming in the Coastal Areas
2
Development of a Mathematical Model for Sustainable Closed-loop Supply Chain with Efficiency and Resilience Systematic Framework
3
Development of a mathematical model for the growth associated Polyhydroxybutyrate fermentation by Azohydromonas australica and its use for the design of fed-batch cultivation strategies
4
Development of a mathematical model for vacuum cooling of cooked meats Original Research Article
5
Development of a mathematical model that predicts the outcome of hormone therapy for prostate cancer
6
Development of a mathematical model to describe the transport of monocyte chemoattractant protein-1 through a three-dimensional collagen matrix
7
Development of a mathematical model to design an offshore wind and wave hybrid energy system
8
Development of a mathematical model to predict clean water head losses in hydrocyclone filters in drip irrigation systems using dimensional analysis
9
Development of a mathematical model to predict head losses from disc filters in drip irrigation systems using dimensional analysis
10
Development of a mathematical model to study the impacts of production and management policies on the herd dynamics and profitability of dairy goats
11
Development of a Matrix Solid Phase Dispersion methodology for the determination of triazine herbicides in mussels
12
Development of a matrix solid-phase dispersion method for the determination of polycyclic aromatic hydrocarbons in sewage sludge samples Original Research Article
13
Development of a matrix solid-phase dispersion method for the screening of polybrominated diphenyl ethers and polychlorinated biphenyls in biota samples using gas chromatography with electron-capture detection
14
Development of a matrix solid-phase dispersion method for the simultaneous determination of pyrethroid and organochlorinated pesticides in cattle feed
15
Development of a matrix solid-phase dispersion-sonication extraction method for the determination of fungicides residues in ginseng extract
16
Development of a matrix-assisted laser desorption ionization mass spectrometric method for rapid process-monitoring of phthalocyanine compounds Original Research Article
17
Development of a mayonnaise with chitosan as natural antioxidant
18
Development of a McAb-based immunoassay for parathion and influence of the competitor structure
19
Development of a measure model for optimal planning of maintenance and improvement of roads
20
Development of a measure of attitude toward nutrition in patient care Original Research Article
21
Development of a measure to assess coping for auditory hallucinations
22
Development of a measure to assess invalidating childhood environments in the eating disorders
23
Development of a measure to assess quality management in certified firms
24
Development of a measurement system of gap between CSB and RV to shorten a nuclear reactor installation period Original Research Article
25
Development of a measuring method for several types of programmed tool paths for NC machine tools using a laser displacement interferometer and a rotary encoder
26
Development of a measuring technique for simultaneous in situ detection of nanoscaled particle size distributions and gas temperatures
27
Development of a Meat-Like Process Flavoring from Soybean-Based Enzyme-Hydrolyzed Vegetable Protein (E-HVP)
28
Development of a mechanical device for concealing underground urban solid residual containers
29
Development of a mechanical earth model in an Iranian off-shore gas field
30
DEVELOPMENT OF A MECHANICAL FEEDING UNIT SUITABLE FOR ONION SEEDLINGS
31
Development of a mechanical transducer for real-time soil tilth sensing
32
Development of a mechanism for ontology-based product lifecycle knowledge integration
33
Development of a mechanism for transplanting rice seedlings
34
Development of a mechanistic model (ERIMO-I) for analyzing the temporal dynamics of the benthic community of an intermittent Mediterranean stream
35
Development of a mechanistic model (ERIMO-I) for analyzing the temporal dynamics of the benthic community of an intermittent Mediterranean stream
36
Development of a mechanistic model for prediction of emission of trace elements from coal-fired power plants
37
Development of a mechanistic-empirical prediction model for joint spalling distress in concrete pavements
38
Development of a mechatronics laboratory-eliminating barriers to manufacturing instrumentation and control
39
Development of a media literacy education programme for children based on activity theory
40
Development of a Medical CAD/CAM System for Orthopedic Surgery
41
Development of a membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment Original Research Article
42
Development of a Membrane Disinfection System for Closed Hydroponics in a Greenhouse
43
Development of a membrane dispersion micro-absorber for CO2 capture
44
Development of a membrane filtration method for enumeration of Listeria monocytogenes from soft cheese
45
Development of a membrane inlet mass spectrometric method for analysis of air samples
46
Development of a membrane reactor for decomposing hydrogen sulfide into hydrogen using a high-performance amorphous silica membrane
47
Development of a membrane reactor for the partial oxidation of hydrocarbons: direct oxidation of propane to acrolein
48
Development of a membrane respirometer
49
Development of a Membrane-Assisted Fluidized Bed Reactor. 1. Gas Phase Back-Mixing and Bubble-toEmulsion Phase Mass Transfer Using Tracer Injection and Ultrasound Experiments
50
Development of a Membrane-Assisted Fluidized Bed Reactor. 2. Experimental Demonstration and Modeling for the Partial Oxidation of Methanol
51
Development of a membraneless extraction module for the extraction of volatile compounds: Application in the chromatographic analysis of vicinal diketones in beer
52
Development of a mercuric iodide detector array for medical imaging applications
53
Development of a mercury ion-selective optical sensor based on fluorescence quenching of 5,10,15,20tetraphenylporphyrin
54
Development of a mercury ion-selective optical sensor based on fluorescence quenching of 5,10,15,20-tetraphenylporphyrin Original Research Article
55
Development of a mercury optical sensor based on immobilization of 4-(2-pyridylazo)-resorcinol on a triacetylcellulose membrane
56
Development of a meshless hybrid boundary node method for Stokes flows
57
Development of a mesoscopic particle model for synthesis of uranium-ceramic nuclear fuel
58
Development of a Message-Oriented Middleware for a Heterogeneous Distributed Database Systems
59
Development of a metabolic network design and optimization framework incorporating implementation constraints: A succinate production case study
60
Development of a Metabolism Factor for Polycyclic Aromatic Hydrocarbons for Use in Multipathway Risk Assessments of Hazardous Waste Combustion Facilities
61
Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner
62
Development of a metal recovery process from Li-ion battery wastes
63
Development of a metallic/ceramic composite for the deposition of thin-film oxygen transport membrane
64
Development of a metastable phase diagram to describe solidification in undercooled Fe–Co melts
65
Development of a metastable phase diagram to describe solidification in undercooled Fe–Co melts
66
Development of a meteorological illuminance model for daylight computations
67
Development of a methanogenic process to degrade exhaustively the organic fraction of municipal "grey waste" under thermophilic and hyperthermophilic conditions
68
Development of a methanol fuelled reformer for fuel cell applications
69
Development of a method based on inductively coupled plasma-dynamic reaction cell-mass spectrometry for the simultaneous determination of phosphorus, calcium and strontium in bone and dental tissue
70
Development of a method based on inductively coupled plasma-dynamic reaction cell-mass spectrometry for the simultaneous determination of phosphorus, calcium and strontium in bone and dental tissue
71
Development of a method based on on-line reversed phase liquid chromatography and gas chromatography coupled by means of an adsorption–desorption interface for the analysis of selected chiral volatile compounds in methyl jasmonate treated strawberries
72
Development of a method based on particle swarm optimization to solve resource constrained project scheduling problem
73
Development of a method based on sorbent trapping followed by solid-phase microextraction for the determination of synthetic musks in indoor air
74
Development of a Method Based on the Needle-trap Microextraction Filled with Hydroxyapatite and Polyaniline Nanocomposite for Determination of Volatile Organic Compounds in the Air
75
Development of a method employing stable isotope dilution tandem mass spectrometry for the simultaneous measurement of C13- and C12-thyroxine in human serum or plasma
76
DEVELOPMENT OF A METHOD FOR DETERMINING THE SIZE OF CLEARANCE IN SLIDING BEARINGS
77
Development of a Method for a Sensitive Simultaneous Determination of Acetaminophen and Tryptophan in Biological Samples
78
Development of a method for analysing energy, environmental and economic efficiency for an integrated steel plant
79
Development of a method for analysis of Iranian damask rose oil: Combination of gas chromatography–mass spectrometry with Chemometric techniques Original Research Article
80
Development of a method for automatic basso continuo playing
81
Development of a method for biohydrogen production from wheat straw by dark fermentation
82
Development of a method for butter type differentiation by electronic nose technology
83
Development of a method for calculating steady-state equipment sensible heat ratio of direct expansion air conditioning units
84
Development of a method for calculating steady-state equipment sensible heat ratio of direct expansion air conditioning units
85
Development of a method for comprehensive and quantitative analysis of plant hormones by highly sensitive nanoflow liquid chromatography–electrospray ionization-ion trap mass spectrometry Original Research Article
86
Development of a method for concentrating and detecting rotavirus in oysters
87
DEVELOPMENT OF A METHOD FOR DETERMINATION OF VOLATILE ORGANIC COMPOUNDS (C6-C9) BY THERMAL DESORPTION-GAS CHROMATOGRAPHY. APPLICATION TO URBAN AND RURAL ATMOSPHERES.
88
Development of a method for direct visual determination of aflatoxin production by colonies of the Aspergillus flavus group
89
Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions Original Research Article
90
Development of a method for estimating the likelihood of finger flow and lateral flow in Canadian agricultural landscapes
91
Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation
92
Development of a method for fast analysis of phenolic molecular markers in biomass burning particles using high performance liquid chromatography/atmospheric pressure chemical ionisation mass spectrometry
93
Development of a method for generating operational solar radiation maps from satellite data for a tropical environment
94
Development of a method for identification and accurate quantitation of aroma compounds in Chinese Daohuaxiang liquors based on SPME using a sol–gel fibre
95
Development of a method for liquid xenon purification using a cryogenic centrifugal pump Original Research Article
96
Development of a method for measurement of relative solubility of nonionic surfactants
97
Development of a Method for Pb Functionalization and Preparing Immunogenic Complex
98
Development of a method for quantification of hot-spots
99
Development of a method for sample preparation for subsequent identification and measurement of 1,2,3,4-tetrahydroisoquinolines and other potentially neurotoxic compounds by high-performance liquid chromatography with ultraviolet and fluorescence detectio
100
Development of a method for separation of PVC and PET using flame treatment and flotation
101
Development of a method for sequential Si extraction from soils
102
Development of a method for the analysis of drugs of abuse in vitreous humor by capillary electrophoresis with diode array detection (CE–DAD)
103
Development of a method for the analysis of nucleotides from the mantle tissue of the mussel Mytilus galloprovincialis
104
Development of a method for the analysis of PCB Congeners and organochlorine pesticides in blood/serum
105
Development of a method for the analysis of seven banned azo-dyes in chilli and hot chilli food samples by pressurised liquid extraction and liquid chromatography with electrospray ionization-tandem mass spectrometry
106
Development of a method for the analysis of underivatized amino acids by liquid chromatography/tandem mass spectrometry: Application on Standard Reference Material 1649a (urban dust)
107
Development of a method for the determination of 9 currently used cotton pesticides by gas chromatography with electron capture detection
108
Development of a Method for the Determination of Fusarium Fungi on Corn Using Mid-Infrared Spectroscopy with Attenuated Total Reflection and Chemometrics
109
Development of a Method for the Determination of Human Skin Moisture Using a Portable Near-Infrared System
110
Development of a method for the determination of low levels of technetium-99
111
Development of a method for the determination of UV filters in water samples using stir bar sorptive extraction and thermal desorption–gas chromatography–mass spectrometry
112
Development of a method for the efficient release of N-glycans from glycoproteins generating native deglycosylated proteins
113
Development of a method for the identification of azaspiracid in shellfish by liquid chromatography–tandem mass spectrometry
114
Development of a method for the identification of scombroid and common substitute species in seafood products by FINS
115
Development of a Method for the Preparation of α-Azido-Masked Acyl Cyanides, Synthetic Equivalents of N-Protected–C-Activated α-Amino Acids
116
Development of a method for the production of hemicellulosic gels from Sitka spruce
117
Development of a method for the quantification of d-glucaric acid in different varieties of grapefruits by high-performance liquid chromatography and mass spectra
118
Development of a method for the quantification of whey allergen traces in mixed-fruit juices based on liquid chromatography with mass spectrometric detection
119
Development of a method for the simultaneous analysis of anionic and non-ionic surfactants and their carboxylated metabolites in environmental samples by mixed-mode liquid chromatography–mass spectrometry
120
Development of a method for the simultaneous determination of phosphoric and amino acid group containing pesticides by gas chromatography with mass-selective detection: Optimization of the derivatization procedure using an experimental design approach
121
Development of a method for the systematic use of bilinear multivariate calibration methods for the correction of interferences in inductively coupled plasma-mass spectrometry
122
Development of a method for time-resolved measurement of airborne acrolein
123
Development of a method for total plasma thiols measurement using a disposable screen-printed carbon electrode coupled with a MnO2 reactor
124
Development of a method for water determination in lactose
125
Development of a method of evaluating an inventory of fission products for a pebble bed reactor
126
Development of a method of measuring cellular stress in cattle and sheep
127
Development of a method of measuring cellular stress in cattle and sheep
128
Development of a method predicting the oxidative stability of edible oils using 2,2-diphenyl-1-picrylhydrazyl (DPPH)
129
Development of a method to assay the microbial population in heap bioleaching operations
130
Development of a method to determine Ni and Cd in biodiesel by graphite furnace atomic absorption spectrometry
131
Development of a Method to Label Forages used in Passage Rate Studies in the Horse
132
Development of a method to manufacture uncured, no-nitrate/nitrite-added whole muscle jerky
133
Development of a method to measure free and bound ropivacaine in human plasma using equilibrium dialysis and Hydrophilic interaction chromatography coupled to high resolution mass spectrometry
134
Development of a Method to Obtain More Accurate General and Oral Health Related Information Retrospectively
135
Development of a method to predict the heat island potential using remote sensing and GIS data
136
Development of a method to quantify in vitro the synergistic activity of “natural” antimicrobials
137
Development of a method to quantify sucrose in soybean grains
138
Development of a method to recovery and amplification DNA by real-time PCR from commercial vegetable oils
139
Development of a Method to Risk Stratify Patients With Heart Failure for 30-Day Readmission Using Implantable Device Diagnostics
140
Development of a method which discriminates between endogenous and exogenous β-boldenone Original Research Article
141
Development of a Methodology Based on Metal-Catalyzed Oxidation Reactions and Mass Spectrometry To Determine the Metal Binding Sites in Copper Metalloproteins
142
Development of a methodology for a simplified finite element model and optimum design
143
Development of a methodology for assessing the environmental impact of radioactivity in Northern Marine environments
144
Development of a methodology for benchmarking public transportation organisations: a practical tool based on an industry sound methodology
145
Development of a methodology for cost determination of wastewater treatment based on functional diagram
146
Development of a methodology for determination of interface fracture toughness of laminate composites—the 0°/90° pair
147
Development of a methodology for evaluating air pollution options for improving the air quality in Mexico City
148
Development of a methodology for in situ assessment of topsoil dry bulk density
149
Development of a methodology for life cycle building energy ratings
150
Development of a methodology for non-contacting strain measurements in fluid environments using computer vision
151
Development of a methodology for selecting office building upgrading solutions based on a test survey in European buildings
152
Development of a Methodology for the Calculation of Youngʹs Modulus of Eggshell using Vibration Measurements
153
Development of a methodology for the quantification of particle number and gaseous concentrations in a bidirectional bus tunnel and the derivation of emission factors
154
Development of a methodology for the simultaneous determination of inorganic and organolead compounds using supercritical fluid extraction followed by gas chromatography–mass spectrometry and its application to environmental matrices
155
Development of a methodology to characterize radon entry in dwellings
156
Development of a methodology to estimate error in the on-line measurements of blend uniformity in a continuous powder mixing process
157
Development of a Methodology to Identify Crucial Emergency Stations for Quick Relief Response to the Damaged Urban Areas Following an Earthquake (Case Study: Isfahan City Center)
158
Development of a Methodology to Identify Crucial Emergency Stations for Quick Relief Response to the Damaged Urban Areas Following an Earthquake (Case Study: Isfahan City Center)
159
Development of a methodology to optimize the air bleed in PEMFC systems operating with low quality hydrogen
160
Development of a methodology to predict sticky deposits due to the destabilisation of dissolved and colloidal material in papermaking—application to different systems
161
Development of a methodology to quantify tamoxifen and endoxifen in breast cancer patients by micellar liquid chromatography and validation according to the ICH guidelines
162
Development of a methodology to study inhalability in very low windspeed conditions
163
Development of a methodology to study the hydrogen embrittlement of steels by means of the small punch test
164
Development of a Micellar electrokinetic capillary chromatography method for the determination of three drugs employed in the erectile dysfunction therapy
165
Development of a Micellar Electrokinetic Chromatographic Method with Indirect UV Detection for Pregabalin Determination in Serum Samples
166
Development of a micro diamond grinding tool by compound process
167
Development of a micro FEL irradiation system
168
Development of a micro FEL irradiation system
169
Development of a micro flow injection manifold for the determination of orthophosphate
170
Development of a micro gas chromatograph for the analysis of hydrogen isotope gas mixtures in the fusion fuel cycle
171
Development of a micro thermal sensor for real-time monitoring of lubricating oil concentration
172
Development of a micro-array-type electron multiplier
173
Development of a micro-array-type electron multiplier
174
Development of a micro-balance system for dust and water vapour detection in the Mars atmosphere Original Research Article
175
Development of a microbial bioassay for chlorinated and brominated hydrocarbons
176
Development of a microbial fermentation process for detoxification of gossypol in cottonseed meal
177
Development of a microbial process for the recovery of petroleum oil from depleted reservoirs at 91–96 °C
178
Development of a microbioreactor with ecto-nucleoside triphosphate diphosphohydrolase 2 (NTPDase2) immobilized on a polyacrylamide-coated capillary at the outlet
179
Development of a microcalorimeter array for wide energy band X-ray astronomy
180
Development of a microcalorimeter array for wide energy band X-ray astronomy
181
Development of a microcapillary column for detecting targeted messenger RNA molecules
182
Development of A Microchamber Array for Picoliter PCR
183
Development of a microchannel based pasteurizer for energy efficient processing of liquids
184
Development of a microchannel evaporator model for a CO2 air-conditioning system
185
Development of a microchannel reactor concerning steam reforming of methanol
186
Development of a micro-cogeneration laboratory and testing of a natural gas CHP unit based on PEM fuel cells
187
Development of a microconductometric biosniffer for detection of trimethylamine
188
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
189
Development of a micro-drilling burr-control chart for PCB drilling
190
Development of a microelectrode array sensing platform for combination electrochemical and spectrochemical aqueous ion testing
191
Development of a Microemulsion High Performance Liquid Chromatography (MELC) Method for Determination of Salbutamol in Metered-Dose Inhalers (MDIS)
192
Development of a microfabricated electrochemical-cantilever hybrid platform
193
Development of a microfabricated impinger for on-chip gas phase sampling Original Research Article
194
Development of a microfilter separation system coupled with a high dose of powdered activated carbon for advanced water treatment Original Research Article
195
Development of a micro-flame ionization detector using a diffusion flame
196
Development of a microfluidic biosensor for detection of environmental mycobacteria
197
Development of a microfluidic biosensor for detection of environmental mycobacteria
198
Development of a micro-forming system for micro-punching process of micro-hole arrays in brass foil
199
Development of a micro-indentation model simulating different mechanical responses of the fibre/matrix interface
200
Development of a micromachined hazardous gas sensor array
201
Development of a micro-manipulation system having a two-fingered micro-hand
202
Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures
203
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
204
Development of a micromechanical life prediction model for plasma sprayed thermal barrier coatings
205
Development of a micrometeorological model for the estimation of methane flux from paddy fields: Validation with standard direct measurements
206
Development of a micro-planar Ag/AgCl quasi-reference electrode with long-term stability for an amperometric glucose sensor Original Research Article
207
Development of a microporous membrane liquid–liquid extractor for organophosphate esters in human blood plasma: identification of triphenyl phosphate and octyl diphenyl phosphate in donor plasma
208
Development of a micropulverized extraction method for rapid toxicological analysis of methamphetamine in hair
209
Development of a micro-punching machine and study on the influence of vibration machining in micro-EDM
210
Development of a microreactor for the production of hydrogen from ammonia
211
Development of a microreactor-based parallel catalyst analysis system for synthesis gas conversion
212
Development of a Microscale Cell Culture Analog To Probe Naphthalene Toxicity
213
Development of a microscopic activity-based framework for analyzing the potential impacts of transportation control measures on vehicle emissions
214
Development of a micro-spectrometer system for process control application
215
Development of a microtitre plate method for determination of phenol utilization, biofilm formation and respiratory activity by environmental bacterial isolates
216
Development of a microwave assisted extraction method for the analysis of 2,4,6-trichloroanisole in cork stoppers by SIDA–SBSE–GC–MS Original Research Article
217
Development of a microwave-assisted digestion method using ICP-OES to measure metals in gum deposits of internal combustion engines
218
Development of a microwave-assisted extraction for the analysis of phenolic compounds from Rosmarinus officinalis Original Research Article
219
Development of a microwave-enhanced isotopic labelling procedure based on the Eschweiler–Clarke methylation reaction
220
Development of a microwave-type densimeter for slush hydrogen Original Research Article
221
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
222
Development of a micro-X-ray fluorescence system based on polycapillary X-ray optics for non-destructive analysis of archaeological objects
223
Development of a mid-Holocene estuarine basin, Rhine–Meuse mouth area, offshore The Netherlands
224
Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC–ICP-MS
225
Development of a mild method for the extraction of anthraquinones from their aluminum complexes in madder lakes prior to HPLC analysis
226
Development of a Millisecond Pulse-Heating Apparatus
227
Development of a miniature analytical system in a lab-on-valve for determination of trace copper by bead injection spectroscopy
228
Development of a miniature cryogenic fluid circuit and a cryogenic micropump Original Research Article
229
Development of a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA), and its application to Auger photoelectron coincidence spectroscopy (APECS)
230
Development of a miniature STM holder for study of electronic conductance of metal nanowires in UHV–TEM
231
Development of a miniaturized diffusive gradients in thin films (DGT) device Original Research Article
232
Development of a miniaturized polymer electrolyte membrane fuel cell with silicon separators
233
Development of a mini-biogas digester for lighting in India
234
Development of a mini-channel evaporator model using R1234yf as working fluid
235
Development of a Minimally Invasive and Non-invasive Lipolysis Laser System for Effective Fat Reduction
236
Development of a Minimally Invasive Technique for Coronary Revascularization in a Porcine Model
237
Development of a Minimum Data Set (MDS) for C-Section Anesthesia Information Management System (AIMS)
238
Development of a Minimum Data Set (MDS) for dental implants registry
239
development of a minimum data set for drug module of computerized physician order entry system
240
Development of a mix design method for SCC based on the rheological characteristics of paste
241
Development of a mixed film lubrication model in cold rolling
242
Development of a mixed integer programming model for technology development strategy and its application to IGCC technologies
243
Development of a mixed solvent system for the efficient resolution of (R, S)-2-octanol catalyzed by magnetite-immobilized lipase
244
Development of a mixed-mode solid phase extraction method and further gas chromatography mass spectrometry for the analysis of 3-alkyl-2-methoxypyrazines in wine
245
Development of a Mixture Supply System for Machining with Minimal Quantity Lubrication
246
DEVELOPMENT OF A MOBILE APPLICATION FOR CHILDREN’S READING SKILL: LITERASI LINUS (LiLIN) MOBILE APP
247
Development of a mobile fused deposition modeling system with enhanced manufacturing flexibility
248
DEVELOPMENT OF A MOBILE MACHINE FOR PICKING PRICKLY PEAR FRUIT
249
Development of a mobile safety monitoring system for construction sites
250
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
251
Development of a mobile system based on laser-induced breakdown spectroscopy and dedicated to in situ analysis of polluted soils
252
Development of a mobile tracer correlation method for assessment of air emissions from landfills and other area sources
253
Development of a mobile water maker, a sustainable way to produce safe drinking water in developing countries Original Research Article
254
Development of a Mode III fatigue test method and a peel test method for tire specimens
255
Development of a Model and Sensor Based Smart Irrigation System
256
Development of a model based scoring system for diagnosis of canine disseminated intravascular coagulation with independent assessment of sensitivity and specificity
257
Development of a model compatible with solar assisted cylindrical energy storage tank and variation of stored energy with time for different phase change materials
258
Development of a model describing the effect of temperature, water activity and (gel) structure on growth and ochratoxin A production by Aspergillus carbonarius in vitro and evaluation in food matrices of different viscosity Original Research Article
259
Development of a model for assessment of biomaterial encrustation in the upper urinary tract
260
DEVELOPMENT OF A MODEL FOR DETECTION AND ESTIMATION OF DEPTH OF SHALLOW BURIED NON-METALLIC LANDMINE AT MICROWAVE X-BAND FREQUENCY
261
Development of a model for environmental risk assessment of growth promoters
262
Development of a model for environmental risk assessment of growth promoters
263
Development of a Model for Estimation of Sunshine Hour Data for Different Regions of Uganda
264
Development of a model for high precursor conversion efficiency pulsed-pressure chemical vapor deposition (PP-CVD) processing
265
Development of a model for ice core dating based on grain elongation
266
Development of a model for laparoscopic cholecystectomy video assisted training. A randomized study
267
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach
268
Development of a model for membrane filtration of long and flexible macromolecules: Application to predict dextran and linear DNA rejections in ultrafiltration
269
Development of a model for predicting trihalomethanes propagation in water distribution systems
270
Development of a model for radon concentration in indoor air Original Research Article
271
Development of a model for reactive emissions from industrial stacks
272
Development of a Model for Rural Tourism Supply Chain Management: A Case Study of Touristic Villages of Central Mazandaran, Iran
273
Development of a model for serpentine quantification in nickel laterite minerals by infrared spectroscopy
274
Development of a model for the analysis of human behavior in a smart home environment
275
Development of a model for the estimation of photosynthetically active radiation from geostationary satellite data in a tropical environment
276
Development of a model for the lean NOx catalytic reaction with hydrocarbon adsorption and desorption
277
Development of a model for the rational design of molecular imprinted polymer: Computational approach for combined molecular dynamics/quantum mechanics calculations Original Research Article
278
Development of a model for the sintering of PZT multilayer ceramics and their dielectric properties
279
Development of a model for thermoeconomic design and operation optimization of a PEM fuel cell system
280
Development of a Model for Training and Evaluation of Laparoscopic Skills
281
Development of a model of tissue with potentially malignant disorders (PMD) in the hamster cheek pouch to explore the long-term potential therapeutic and/or toxic effects of different therapeutic modalities
282
Development of a model system for touristic hunting revenue collection and allocation
283
Development of a model system to study fuel autoxidation in supercritical media: decomposition kinetics of 2,2′-azobis(isobutyronitrile) in supercritical carbon dioxide
284
Development of a model to calculate asbestos fiber from damaged asbestos slates depending on the degree of damage
285
Development of a model to describe the compositional growth and dietary lysine requirements of pigs fed ractopamine
286
Development of a model to reproduce observed suspended sediment distributions in the southern North Sea using Principal Component Analysis and Multiple Linear Regression
287
Development of a model whipped cream: Effects of emulsion droplet liquid/solid character and added hydrocolloid
288
Development of a model-based netsourcing decision support system using a five-stage methodology
289
Development of a modeling approach to predict ash formation during co-firing of coal and biomass
290
Development of a modelling framework in response to new European energy-efficiency regulatory obligations: The Irish experience
291
Development of a Modern Curriculum in Software Engineering at Master Level across Countries
292
Development of a modified baited trap for detection of schistosome cercariae using natural oils rich in polyunsaturated fatty acids in Sudan
293
Development of a Modified Bromley Methodology for the estimation of ionic media effects on solution equilibria: Part 5. The chemical model of boric acid in aqueous solution at 25 °C and comparison with arsenious acid
294
Development of a modified Bromley methodology for the estimation of ionic media effects on solution equilibria: Part 6. The chemical model of phosphoric acid in aqueous solution at 25 °C and comparison with arsenic acid
295
Development of a Modified Bromleyʹs Methodology (MBM) for the estimation of ionic media effects on solution equilibria Part 1. Calculation of the interaction parameters in the molar and molal scales at 25°C
296
Development of a Modified Bromleyʹs Methodology (MBM) for the estimation of ionic media effects on solution equilibria. Part 2. Correlation of the molar and molal interaction parameters with the charge and crystal radii of the ions
297
Development of a Modified Bromleyʹs Methodology for the estimation of ionic media effects on solution equilibria: Part 3. Application to the construction of thermodynamic models
298
Development of a Modified Bromleyʹs Methodology for the estimation of ionic media effects on solution equilibria: Part 4. The chemical model of Fe(III) with the halide ligands in aqueous solution at 25°C
299
Development of a modified concrete rheometer to measure the rheological behavior of conventional and self-consolidating concretes
300
Development of a modified CVD coating process for the enhancement of the high temperature oxidation resistance of Cr2O3 and Al2O3 forming alloys
301
Development of a modified CVD coating process for the enhancement of the high temperature oxidation resistance of Cr2O3 and Al2O3 forming alloys
302
Development of a modified dry curing process for beef
303
Development of a modified electrode with amine-functionalized TiO2/multi-walled carbon nanotubes nanocomposite for electrochemical sensing of the atypical neuroleptic drug olanzapine
304
Development of a Modified Friedewald’s Formula to Calculate Low-Density Lipoprotein in an Iranian Population
305
Development of a modified sum-peak method for activity determination of some gamma emitters
306
Development of a modified sum-peak method for activity determination of some gamma emitters
307
Development of a modified vermireactor for efficient vermicomposting: a laboratory study
308
Development of a modified wiggler for higher harmonic lasing of a free-electron laser
309
Development of a modified-release hydrophilic matrix system of a plant extract based on co-spray-dried powders
310
Development of a MODIS tree cover validation data set for Western Province, Zambia
311
Development of a modular CdTe detector plane for gamma-ray burst detection below 100 keV Original Research Article
312
Development of a modular nodal method for solving three dimensional spherical harmonic equations
313
Development of a molecular detection and differentiation system for ochratoxin A producing Penicillium species and its application to analyse the occurrence of Penicillium nordicum in cured meats
314
Development of a molecular dynamics potential for Si–H systems and its application to CVD reaction processes
315
Development of a Molecular Kinetic Model and Tuning of its Required Kinetic Parameters for Thermal Cracking
316
Development of a molecular kinetic scheme for methane partial oxidation over a Rh/α-Al2O3 catalyst
317
Development of a molecular method for the rapid discrimination of red seaweeds used for agar production
318
Development of a molecularly imprinted polymer based solid-phase extraction of local anaesthetics from human plasma
319
Development of a molecularly imprinted polymer based solid-phase extraction of local anaesthetics from human plasma Original Research Article
320
Development of a molecularly imprinted polymer for pyridoxine using an ion-pair as template Original Research Article
321
Development of a molecularly imprinted polymer for selective extraction followed by liquid chromatographic determination of sitagliptin in rat plasma and urine
322
Development of a molecularly imprinted polymer for the analysis of avermectin Original Research Article
323
Development of a momentum determined electron beam in the 1–45 GeV range
324
Development of a momentum determined electron beam in the 1–45 GeV range
325
Development of a monitoring system for a PV solar plant
326
Development of a monitoring tape for ammonia gas in air by fluorescence detection
327
Development of a monitoring tape for nitrogen dioxide in air
328
Development of a Monoclonal Antibody for the Detection and Quantification of Predation on Slugs within the Arion hortensis agg. (Mollusca: Pulmonata)
329
Development of a monoclonal antibody specific to granulocytes and its application for variation of granulocytes in scallop Chlamys farreri after acute viral necrobiotic virus (AVNV) infection
330
Development of a monoclonal antibody-based competitive ELISA for detection of β-conglycinin, an allergen from soybean
331
Development of a monoclonal antibody-based competitive enzyme linked-immunosorbent assay (c-ELISA) for quantification of silver carp parvalbumin
332
Development of a monoclonal antibody-based enzyme-linked immunosorbent assay for detection of the furaltadone metabolite, AMOZ, in fortified shrimp samples
333
Development of a monoclonal antibody-based enzyme-linked immunosorbent assay for the analysis of the new fungicide 2-allylphenol in strawberry fruits
334
Development of a monoclonal antibody-based indirect competitive immunosorbent assay for 4(5)-Methylimidazole detection in caramels
335
Development of a monoclonal antibody-based sandwich-type enzyme-linked immunosorbent assay (ELISA) for detection of abrin in food samples
336
Development of a monoclonal blocking ELISA for the detection of antibody to Mycoplasma bovis in dairy cattle and comparison to detection by PCR
337
Development of a monoclonal blocking ELISA for the detection of antibody to Mycoplasma bovis in dairy cattle and comparison to detection by PCR
338
Development of a Monocyte Activation Test for Evaluating Recombinant Hepatitis B Vaccine: A Novel Approach for Pyrogen Assessment
339
Development of a monocyte/macrophage-like cell line, RTS11, from rainbow trout spleen
340
Development of a monolithic silica extraction tip for the analysis of proteins
341
Development of a Monte Carlo based aggregate model for residential electric water heater loads
342
Development of a More Effective Mosquito Trapping Box for Vector Control
343
Development of a more efficient emulsion liquid membrane system with a dilute polymer solution for extraction of penicillin G
344
Development of a more realistic upper bound solution for the three-dimensional problems in the forward extrusion process
345
Development of a more realistic upper bound solution for the three-dimensional problems in the forward extrusion process
346
Development of a morphological texture in relation with the crystallographic texture during sintering of strontium hexaferrites
347
Development of a movable synchrotron-radiation mask for the Photon Factory Advanced Ring (PF-AR)
348
Development of a movable synchrotron-radiation mask for the Photon Factory Advanced Ring (PF-AR)
349
DEVELOPMENT OF A MOWER FOR GRASS HARVESTING
350
Development of a MSW classification system for the evaluation of mechanical properties
351
Development of a multi-agent-based distributed simulation platform for semiconductor manufacturing
352
Development of a multianalyte method based on micro-matrix-solid-phase dispersion for the analysis of fragrance allergens and preservatives in personal care products
353
Development of a multicenter peripheral arterial interventional database: The PVD-QI2
354
Development of a multi-channel exploratory battery for psychophysiological assessment: the Stress Profile
355
Development of a multichannel Fourier-transform spectrometer to measure weak chemiluminescence: Application to the emission of singlet-oxygen dimol in the decomposition of hydrogen peroxide with gallic acid and K3[Fe(CN)6]
356
Development of a multichannel integrated interferometer immunosensor
357
Development of a Multichannel Microfluidic Analysis System Employing Affinity Capillary Electrophoresis for Immunoassay
358
Development of a multichannel monolith large-scale enzymatic membrane and application in an immobilized enzymatic membrane reactor
359
Development of a multi-channel waveform sampling ASIC for animal PET with DOI information
360
Development of a multi-channel waveform sampling ASIC for animal PET with DOI information
361
Development of a multi-class method for the quantification of veterinary drug residues in feedingstuffs by liquid chromatography-tandem mass spectrometry
362
Development of a multi-classification neural network model to determine the microbial growth/no growth interface
363
Development of a multi-component aqueous NiO, CuO, and Co3O4 suspension for use in suspension plasma spraying of SOFC anode layers
364
Development of a multi-component chemically reactive detection conjugate for the determination of Hg(II) in water samples Original Research Article
365
Development of a multi-component chemically reactive detection conjugate for the determination of Hg(II) in water samples Original Research Article
366
Development of a multi-component fiber-reinforced composite implant for load-sharing conditions
367
DEVELOPMENT OF A MULTI-CRITERIA AND MULTI-PARAMETRIC OPTIMIZATION TOOL FOR THE CUTTING CONDITIONS OF TURNING PROCESS
368
Development of a multicriteria tool for optimizing the renovation of buildings
369
Development of a Multidimensional HighPerformance Liquid Chromatography (HPLC) Separation for Bayer Humic Substances
370
Development of a multidimensional measure of fibromyalgia symptomatology: The comprehensive rating scale for fibromyalgia symptomatology
371
Development of a multidimensional measure of tobacco dependence in adolescence
372
Development of a multi-dimensional thermal-hydraulic system code, MARS 1.3.1
373
Development of a multi-electrode extrapolation chamber as a prototype of a primary standard for the realization of the unit of the absorbed dose to water for beta brachytherapy sources
374
Development of a multi-electrode extrapolation chamber as a prototype of a primary standard for the realization of the unit of the absorbed dose to water for beta brachytherapy sources
375
Development of a Multi-Epitope Recombinant Protein for the Diagnosis of Human Visceral Leishmaniasis
376
Development of a multi-factor model for predicting the effects of ambient ozone on the biomass of white clover
377
Development of a multi-fibre unit cell for use in modelling of fatigue of unidirectional composites
378
Development of a multi-Fourier-transform interferometer: fundamentals
379
Development of a multi-frequency laser for use in MALDI-TOFMS
380
Development of a multifunction module for the neutron electric dipole moment experiment at PSI
381
Development of a multifunction module for the neutron electric dipole moment experiment at PSI
382
Development of a multi-function software decision support tool for the promotion of the safe reuse of treated urban wastewater Original Research Article
383
Development of a multifunctional membrane for chromatic warning and enhanced adsorptive removal of heavy metal ions: Application to cadmium
384
Development of a multifunctional particle spectrometer for space radiation imaging
385
Development of a multifunctional particle spectrometer for space radiation imaging
386
Development of a Multi-GeV spectrometer for laser–plasma experiment at FLAME
387
Development of a Multi-GeV spectrometer for laser–plasma experiment at FLAME
388
Development of a multi-grid-type microstrip gas chamber for synchrotron radiation applications and spallation neutron sources
389
Development of a multi-grid-type microstrip gas chamber for synchrotron radiation applications and spallation neutron sources
390
Development of a multilayer anode for solid oxide fuel cells
391
Development of a multi-layer diffusion couple to study fission product transport in β-SiC
392
Development of a multi-layered micro-reactor coated with Pt–Co/Al2O3 catalyst for preferential oxidation of CO
393
Development of a multilocus variable number of tandem repeat typing method for Oenococcus oeni Original Research Article
394
Development of a multilocus variable-number of tandem repeat typing method for Listeria monocytogenes serotype 4b strains
395
Development of a multi-mechanistic, dual-porosity, dual-permeability, numerical flow model for coalbed methane reservoirs
396
Development of a multimetric index based on benthic macroinvertebrates for downstream Jajrud River in Tehran province, Iran
397
Development of a multimetric index based on benthic macroinvertebrates for the assessment of natural wetlands in Southwest Ethiopia
398
Development of a multimetric index based on macroinvertebrates for drainage ditch networks in agricultural areas
399
Development of a multi-microphone calibrator
400
Development of a multi-nozzle drop-on-demand system for multi-material dispensing
401
Development of a Multi-nutrient Data Quality Evaluation System
402
Development of a Multi-nutrient Data Quality Evaluation System
403
Development of a multi-objective coagulation system for long-term fouling control in dead-end ultrafiltration
404
Development of a multi-objective optimization algorithm using surrogate models for coastal aquifer management
405
Development of a multiobjective optimization procedure for reducing edge delamination stresses in composite plates
406
Development of A Multi-objective Robust Probabilistic Programming Mathematical Model Using Improved ε - Constrained Method in Gas Distribution Network Projects Implementation
407
Development of a multiparametric analyser based on ISFET sensors applied to process control in the wine industry
408
Development of a multiparametric system based on solid-state microsensors for monitoring a nuclear waste repository
409
Development of a multi-pass facility for equal-channel angular pressing to high total strains
410
Development of a multi-pass facility for equal-channel angular pressing to high total strains
411
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables
412
Development of a multi-pixel photon sensor with single-photon sensitivity
413
Development of a multi-pixel photon sensor with single-photon sensitivity
414
Development of a Multiple Coil Magneto-Rheological Smart Damper to Improve the Seismic Resilience of Building Structures
415
Development of a multiple criteria based decision support system for environmental assessment of recycling measures in the iron and steel making industry
416
Development of a multiple layer vacuum insulation chip
417
Development of a multiple objective planning theory and system for sustainable air quality monitoring networks
418
Development of a multiple primer RAPD assay as a tool for phylogenetic analysis in Listeria spp. strains isolated from milkproduct associated epidemics, sporadic cases of listeriosis and dairy environments
419
Development of a Multiple-Class High-Resolution Gas Chromatographic Relative Retention Time Model for Halogenated Environmental Contaminants
420
Development of a multiple-item scale for measuring customer satisfaction in travel agencies services
421
Development of a multiplex and semi-nested PCR assay for detection of Yersinia enterocolitica and Aeromonas hydrophila in raw milk Original Research Article
422
Development of a multiplex assay for the detection of antibodies to Borrelia burgdorferi in horses and its validation using Bayesian and conventional statistical methods
423
Development of a multiplex assay for the detection of antibodies to Borrelia burgdorferi in horses and its validation using Bayesian and conventional statistical methods
424
Development of a multiplex MethyLight assay for the detection of multigene methylation in human colorectal cancer
425
Development of a multiplex PCR method for testing six GM soybean events
426
Development of a multiplex polymerase chain reaction assay for differentiation of field strain isolates and vaccine strains S19 and RB51 of Brucella in Iran
427
Development of a Multiplex Polymerase Chain Reaction for Differential Diagnosis of Canary Pox Virus
428
Development of a multiplex qPCR method for simultaneous quantification in dry-cured ham of an antifungal-peptide Penicillium chrysogenum strain used as protective culture and aflatoxin-producing moulds
429
Development of a multiplex real time PCR to detect thermophilic lactic acid bacteria in natural whey starters
430
Development of a multiplex real-time PCR assay for identification of members of the Anopheles gambiae species complex
431
Development of a multiplex real-time PCR method for pathogenic Vibrio parahaemolyticus detection (tdh+ and trh+)
432
Development of a multiplex real-time PCR method for simultaneous detection of Vibrio parahaemolyticus, Listeria monocytogenes and Salmonella spp. in raw shrimp
433
Development of a multiplex real-time PCR to quantify aflatoxin, ochratoxin A and patulin producing molds in foods
434
Development of a Multiplex RT-PCR Assay for Detection of the Causal Agents of Citrus Tristeza and Cachexia Diseases with Coamplification of Plant mRNA as an Internal Control
435
Development of a multiplex UPLC-MRM MS method for quantification of human membrane transport proteins OATP1B1, OATP1B3 and OATP2B1 in in vitro systems and tissues Original Research Article
436
Development of a multiplexed Luminex assay for simultaneous detection of enteric viruses in cattle
437
Development of a multiplexed PCR assay combined with propidium monoazide treatment for rapid and accurate detection and identification of three viable Salmonella enterica serovars
438
Development of a multi-preservative method based on solid-phase microextraction–gas chromatography–tandem mass spectrometry for cosmetic analysis
439
Development of a multipurpose fruit and vegetable processor for a manned mission to Mars Original Research Article
440
Development of a multipurpose tile body: Phase and microstructural development
441
Development of a multi-residue analytical method, based on liquid chromatography–tandem mass spectrometry, for the simultaneous determination of 46 micro-contaminants in aqueous samples
442
Development of a multi-residue analytical methodology based on liquid chromatography–tandem mass spectrometry (LC–MS/MS) for screening and trace level determination of pharmaceuticals in surface and wastewaters
443
Development of a multiresidue method for analysis of pesticides in sediments based on isotope dilution and liquid chromatography-electrospray–tandem mass spectrometry
444
Development of a multiresidue method for analyzing herbicide and fungicide residues in bovine milk based on solid-phase extraction and liquid chromatography–tandem mass spectrometry
445
Development of a multi-residue method for fast screening and confirmation of 20 prohibited veterinary drugs in feedstuffs by liquid chromatography tandem mass spectrometry
446
Development of a multiresidue method for the determination of endocrine disrupters in fish fillet using gas chromatography–triple quadrupole tandem mass spectrometry
447
Development of a multi-residue method for the determination of organic micropollutants in water, sediment and mussels using gas chromatography–tandem mass spectrometry
448
Development of a multi-residue method for the determination of pesticides in cereals and dry animal feed using gas chromatography–tandem quadrupole mass spectrometry: II. Improvement and extension to new analytes
449
Development of a multi-residue method using acetonitrile-based extraction followed by liquid chromatography–tandem mass spectrometry for the analysis of steroids and veterinary and human drugs at trace levels in soil
450
Development of a multi-residue screening method for the determination of pesticides in cereals and dry animal feed using gas chromatography–triple quadrupole tandem mass spectrometry
451
Development of a multi-resolution framework for NUBS
452
Development of a multi-scale finite element model of the osteoporotic lumbar vertebral body for the investigation of apparent level vertebra mechanics and micro-level trabecular mechanics
453
Development of a multi-spectral vision system for the detection of defects on apples Original Research Article
454
Development of a multi-stage cloud water collector Part 1: Design and field performance evaluation
455
Development of a multi-stage cloud water collector Part 2: Numerical and experimental calibration
456
Development of a multistaged foam fractionation column
457
Development of a multitechnology field-programmable gate array suitable for photonic information processing
458
Development of a multi-temporal Kalman filter approach to geostationary active fire detection & fire radiative power (FRP) estimation
459
Development of a multi-tiered approach to the in vitro prescreening of clay-based enterosorbents
460
Development of a multi-tiered business model for value chain analysis for mobile nutrition counseling online system
461
Development of a multivariate regression model for overall satisfaction in public buildings based on field studies in Beijing and Shanghai
462
Development of a multi-vendor software to size and select TEC
463
Development of a mutant of Trichoderma citrinoviride for enhanced production of cellulases
464
Development of a myricetin/hydroxypropyl-β-cyclodextrin inclusion complex: Preparation, characterization, and evaluation
465
Development of a Nanocluster-Based Platform for Determination of Sofosbuvir
466
Development of a nano-electrospray MSn method for the analysis of serotonin and related compounds in urine using a LTQ-orbitrap mass spectrometer
467
Development of a Nano-ELISA system for the rapid and sensitive detection of H9N2 avian influenza
468
Development of a nano-liquid chromatography on chip tandem mass spectrometry method for high-sensitivity hepcidin quantitation
469
Development of a nano–micro carrier system for sustained pulmonary delivery of clarithromycin
470
Development of a nanoprecipitation method for the entrapment of a very water soluble drug into Eudragit RL nanoparticles
471
Development of a nanosecond time-resolved Brewster angle microscope to observe phase change at an interface
472
Development of a nanostructure microstructure in the Al–Ni system using the electrospark deposition process
473
Development of a nanostructured lipid carrier formulation for increasing photo-stability and water solubility of Phenylethyl Resorcinol
474
Development of a narrow size-distribution aerosol generator
475
Development of a NASICON-based amperometric carbon dioxide sensor
476
Development of a National Consensus Minimum Data Set for the Diagnosis and Treatment of Oral Cancer: Towards Precision Management
477
Development of a National Guide for Designing the Structure of Makeshift Hospital: With Focus on Pandemics
478
Development of a National Mega Research Project on the Integrated Watershed Management for Iran
479
Development of a national methane emission inventory for domestic livestock in Saudi Arabia
480
Development of a natural gas reaction mechanism for engine simulations based on rapid compression machine experiments using a multi-objective optimisation strategy
481
Development of a Natural Preservative System in Fluticasone Propionate Nasal Spray Formulation Using Eucalyptus globulus Essential Oil
482
Development of a navigation and control system for an autonomous outdoor vehicle in a steel plant
483
Development of a Nb-free TiAl-based intermetallics with a low-temperature superplasticity
484
Development of a needle-type biosensor for intravascular glucose monitoring
485
Development of a Need-Oriented Steam Turbine Cycle Simulation Toolbox
486
Development of a negligible depletion-solid phase microextraction method to determine the free concentration of chlorpromazine in aqueous samples containing albumin
487
Development of a nested-PCR assay for the detection of cryptosporidium parvum in finished water
488
Development of a network-based power quality diagnosis system
489
Development of a neural fuzzy system for advanced prediction of dew point pressure in gas condensate reservoirs
490
Development of a neural network model for a cold rolling process
491
Development of a neural network model to update forest distribution data for managed alpine stands
492
Development of a neural network model to update forest distribution data for managed alpine stands
493
Development of a neural network-based fault diagnostic system for solar thermal applications
494
Development of a Neuro-Fuzzy approach for treating multimodal distributions and spurious clusters
495
Development of a neurotoxic equivalence scheme of relative potency for assessing the risk of PCB mixtures
496
Development of a neutron absorption tracer technique for evaluation of fluid dynamics in coal liquefaction reactors
497
Development of a neutron detector with a GEM
498
Development of a neutron detector with a GEM
499
Development of a Neutron Radiography System based on a 10 MeV Electron Linac
500
Development of a neutron time-of-flight source at the ELBE accelerator
501
Development of a neutron time-of-flight source at the ELBE accelerator
502
Development of a neutron tomography system using a low flux reactor
503
Development of a neutron tomography system using a low flux reactor
504
Development of a neutron-imaging detector based on pulse–height correlation between two superconducting tunnel junctions on a Li2B4O7 crystal
505
Development of a neutron-imaging detector based on pulse–height correlation between two superconducting tunnel junctions on a Li2B4O7 crystal
506
Development of a new “flow-through” sample cup for the vertical micro-furnace pyrolyzer to reduce undesirable secondary reactions and band broadening of resulting pyrolyzates
507
Development of a new abrasion tester based on planetary motion
508
Development of a new academic digital library: a study of usage data of a core medical electronic journal collection
509
Development of a new aerosol phase extraction method for metal determination through inductively coupled plasma atomic emission spectrometry
510
Development of a new airlift-driven raceway reactor for algal cultivation
511
Development of a New Alpha Function for the Peng–Robinson Equation of State: Comparative Study of Alpha Function Models for Pure Gases (Natural Gas Components) and Water-Gas Systems
512
Development of a new analytical approach based on cellulose membrane and chelator for differentiation of labile and inert metal species in aquatic systems Original Research Article
513
Development of a new analytical method for online simultaneous qualitative determination of aluminium (free aluminium ion, aluminium-fluoride complexes) by HPLC-FAAS
514
Development of a new analytical method for the determination of fumonisins B1 and B2 in food products based on high performance liquid chromatography and fluorimetric detection with post-column derivatization
515
Development of a new analytical method for the determination of sulfites in fresh meats and shrimps by ion-exchange chromatography with conductivity detection Original Research Article
516
Development of a new apparatus for contamination measurement of overhead transmission line insulators
517
Development of a new apparatus for ultrasonic vibration-assisted glass hot embossing process
518
Development of a new approach for deterministic supply chain network design
519
DEVELOPMENT OF A NEW APPROACH FOR HIGH-QUALITY QUADRUPLING FREQUENCY OPTICAL MILLIMETER-WAVE SIGNAL GENERATION WITHOUT OPTICAL FILTER
520
Development of a new approach for microbial decontamination of water using modified Fentonʹs reaction
521
Development of a New Approach to Earthquake Prediction: Load/Unload Response Ratio (LURR) Theory
522
Development of a New Aqueous Process for Nuclear Fuel Reprocessing: Hot Tests on the Recovery of U and Pu from a Nitric Acid Solution of Spent LWR Fuel
523
Development of a new assessment system for the applicability of digital projects in the oil and gas sector
524
Development of a new atropine sulfate bulk acoustic wave sensor based on a molecularly imprinted electrosynthesized copolymer of aniline with o-phenylenediamine Original Research Article
525
Development of a New Backward Directional Coupler Based on Perforated Substrates
526
Development of a new Bi–Di correlation for solids drying
527
Development of a new biochemical assay for assessing toxicity in invertebrate and fish sperm
528
Development of a new biodiesel that integrates glycerol, by using CaO as heterogeneous catalyst, in the partial methanolysis of sunflower oil
529
Development of a new bioethanol feedstock – Anaerobically digested fiber from confined dairy operations using different digestion configurations
530
Development of a new biomimetic sensor based on an FeIIIFeII complex for the determination of phenolic compounds
531
Development of a new biomonitoring method to detect the abnormal activity of Daphnia magna using automated Grid Counter device
532
Development of a new biosensor based on functionalized SBA-15 modified screen-printed graphite electrode as a nano-reactor for Gquadruplex recognition
533
Development of a new Biot number and lag factor correlation for drying applications
534
Development of a new biotic index to assess freshwater pollution
535
Development of a new bulk optode membrane for the determination of mercury(II) Original Research Article
536
Development of a new burr-free hydro-mechanical punching
537
Development of a new calcium phosphate cement that contains sodium calcium phosphate
538
Development of a new chemically modified carbon paste electrode for selective determination of urinary and serum oxalate concentration
539
Development of a new chromium reducing antioxidant capacity (CHROMAC) assay for plants and fruits
540
Development of a new class of (1S,3R,4R)-2-azabicyclo[2.2.1]heptane-oxazoline ligands and their application in asymmetric transfer hydrogenation
541
Development of a new class of C1-symmetric bisphosphine ligands for rhodium-catalyzed asymmetric hydrogenation
542
Development of a new class of photochromic peptides by using diarylethene-based non-natural amino acids
543
Development of a new class of potential antiatherosclerosis agents: NO-donor antioxidants
544
Development of a new clay supported polyethylenimine composite for CO2 capture
545
Development of a new cleaner production process for producing chromic oxide from chromite ore
546
Development of a new clean-up tandem assay column for the detection of ochratoxin A in roasted coffee Original Research Article
547
Development of a new coal washability index
548
Development of a new column switching method for simultaneous speciation of selenometabolites and selenoproteins in human serum
549
Development of a new combinatorial mask for addressable ternary phase diagramming: application to rare earth doped phosphors
550
Development of a new compositional model with multi-component sorption isotherm and slip flow in tight gas reservoirs
551
Development of a new compound method to extract the five parameters of PV modules
552
Development of a new concept solar-biomass cogeneration system
553
Development of a new consumable-free thermal modulator for comprehensive two-dimensional gas chromatography
554
Development of A New Correlation for Estimating Pressure Gradient of Oil- Water Two Phase Flow in A Horizontal Pipe
555
Development of a new Cr(VI)-biosorbent from agricultural biowaste
556
Development of a new creep testing equipment to obtain long-term deformation parameters of salt
557
Development of a new cyano-bonded column for high-performance liquid chromatography
558
Development of a new damper to reduce resonant vibrations in lightweight steel joist floors
559
Development of a new decay heat removal system for a high temperature gas-cooled reactor
560
Development of a new design of hip protectors using finite element analysis and mechanical tests
561
Development of a new design of valve-regulated lead–acid battery (new Model YT4B) for motorcycle use
562
Development of a new detection system for monitoring high-level tritiated water
563
Development of a new detector and DAQ systems for iBIX
564
Development of a new detector and DAQ systems for iBIX
565
Development of a new device to control oblique waves in transitional boundary layers
566
Development of a new device to perform torsional ultrasonic fatigue testing
567
Development of a new diagnostic method for galactosemia by high-performance anion-exchange chromatography with pulsed amperometric detection
568
Development of a new diagnostic protocol using a neuro-dynamical tool
569
Development of a new discharge control system for JT-60 with a unix workstation and a VME-bus system
570
Development of a new dispersive liquid–liquid microextraction method in a narrow-bore tube for preconcentration of triazole pesticides from aqueous samples Original Research Article
571
Development of a new DNA chip microarray by hydrophobic interaction
572
Development of a New DNA Chip Microarray Using RFSA Method
573
Development of a new DNA extraction protocol for PFGE typing of Mycobacterium tuberculosis complex
574
Development of a new durability index for compacted shale
575
Development of a New Dynamic Friction Model for Analytical Modeling of Elliptical Vibration Assisted Turning Process
576
Development of a new dynamometer for measuring grip strength applied on a cylindrical handle
577
Development of a new ecological concrete with CO2 emissions below zero
578
Development of a new electrochemical catalyst with an electrochemically assisted regeneration ability for H2 production at low temperatures
579
Development of a new electrochemical hydride generator with tungsten wire cathode for the determination of As and Sb by atomic fluorescence spectrometry
580
Development of a new electrochemical sensor based on modified carbon paste electrode for simultaneous determination of norepinephrine and acetaminophen in real samples
581
Development of A New Electrochemical Sensor based on Zr-MOF/MIP for Sensitive Diclofenac Determination
582
Development of a new electrodeposition method for Pu-determination in environmental samples
583
Development of a new electronic neutron imaging system
584
Development of a new electronic neutron imaging system
585
Development of a new electroplating solution for electrodeposition of Au–Co alloys
586
Development of a new empirical non-cubic equation of state
587
Development of a New Epitope Immunogenic Structure Based on the Coronavirus Membrane Glycoprotein M Using Immunoinformatics Tools
588
Development of a new EPR spin trap, DOD-8C (N-[4-dodecyloxy-2-(7′-carboxyhept-1′-yloxy)benzylidene]-N-tert-butylamine N-oxide), for the trapping of lipid radicals at a predetermined depth within biological membranes
589
Development of a new equation and validation of earlier resting energy expenditure predicting equations in adults living in Tehran
590
Development of a new equation of state for mixed salt and mixed solvent systems, and application to vapour–liquid and solid (hydrate)–vapour–liquid equilibrium calculations
591
Development of a New Experimental Technique for Dynamic Fracture Toughness Measurement of Rocks using dro‎p Weight Test
592
Development of a new external heat exchanger for a circulating fluidized bed boiler
593
Development of a new fast shower maximum detector based on microchannel plates photomultipliers (MCP-PMT) as an active element
594
Development of a new fast shower maximum detector based on microchannel plates photomultipliers (MCP-PMT) as an active element
595
Development of a new FIA-potentiometric sensor for dopamine based on EVA-copper(II) ions
596
Development of a new finite element for composite delamination analysis
597
Development of a new finite element for plate and shell analysis by application of generalized approach to patch test
598
Development of a new first level trigger for the surface array in the Pierre Auger Observatory based on the CycloneTM Altera FPGA
599
Development of a new first level trigger for the surface array in the Pierre Auger Observatory based on the CycloneTM Altera FPGA
600
Development of a new flat stationary evacuated CPC-collector for process heat applications
601
Development of a new fluorescent probe for transition metal cations based upon fluorescence resonance energy transfer
602
Development of a new fluorescent probe for transition metal cations based upon fluorescence resonance energy transfer Original Research Article
603
Development of a new fluorescent sensor based on a triazolo-thiadiazin derivative immobilized in polyvinyl chloride membrane for sensitive detection of lead(II) ions
604
Development of a New Fluoride Colorimetric Sensor Based on Anti-aggregation of Modified Silver Nanoparticles
605
Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tertbutyl-1,3-benzexazole) for nickel(II) ions
606
Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions Original Research Article
607
Development of a new form for the alpha function of the Redlich–Kwong cubic equation of state
608
Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen
609
Development of a new frame finite element for crash analysis, using a mixed variational principle and rotations as independent variables
610
Development of a New Framework for Health Assessment in Patients with by using miRNA-197 in Adults Coronary Artery Disease
611
Development of a new free wake model considering a blade–vane interaction for a low noise axial fan planform optimization
612
Development of a new frequency weighting filter for the assessment of grinder exposure to wrist-transmitted vibration
613
Development of a new fusion power monitor based on activation of flowing water
614
Development of a new gas absorption chiller heater—advanced utilization of waste heat from gas-driven co-generation systems for air-conditioning
615
Development of a new gas chromatography–mass spectrometry (GC–MS) methodology for the evaluation of 5α-reductase activity
616
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes Application to carbon dioxide/methane and carbon dioxide/helium mixtures
617
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes. Application to oxygen/nitrogen mixture
618
Development of a new gas sensor for binary mixtures based on the permselectivity of polymeric membranes: Application to carbon dioxide/methane and carbon dioxide/helium mixtures Original Research Article
619
Development of a New Gas-Inducing Turbine Family: The Partially Shrouded Turbine
620
Development of a new generalized correlation to characterize physical properties of pure components and petroleum fractions
621
Development of a new generation of amorphous hard coatings based on the Si–B–C–N–O system for applications in extreme conditions
622
Development of a new generation of filament wound composite pressure cylinders
623
Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
624
Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
625
Development of a new generation of optical slope measuring profiler
626
Development of a new generation of optical slope measuring profiler
627
Development of a new graded-porosity FeAl alloy by elemental reactive synthesis Original Research Article
628
Development of a new high performance liquid chromatography method for measurement of coenzyme Q10 in healthy blood plasma
629
Development of a new high performance low pressure chromatographic system using a multisyringe burette coupled to a chromatographic monolithic column
630
Development of a new high porosity ceramic membrane for the treatment of bilge water Original Research Article
631
Development of a new high-performance liquid chromatography method with diode array and electrospray ionization-mass spectrometry detection for the metabolite fingerprinting of bioactive compounds in Humulus lupulus L.
632
Development of a new hollow-fiber module for large ultrafiltration plants Original Research Article
633
Development of a new homogenous photo-Fenton process using Fe(III)-EDDS complexes
634
Development of a new hybrid plasma torch for materials processing
635
Development of a new hybrid technique for estimating of relative uplift force in gravity dams based on whale optimization algorithm
636
Development of A new Hydraulic Relationship for Submerged Slide Gates
637
Development of a new hydraulic servo cylinder with mechanical feedback
638
Development of a new hydrocarbon index for oil-in-water
639
Development of a new hydrodemetallization catalyst for deep desulfurization of atmospheric residue and the effect of reaction temperature on catalyst deactivation
640
Development of a New Immunochromatographic Assay Using Gold Nanoparticles for Screening of IgA Deficiency
641
Development of a new immunotoxin from part of the scorpion venom for the treatment of breast cancer
642
Development of a new in vitro method to evaluate the photoprotective sunscreen activity of plant extracts against high UV-B radiation
643
Development of a new in vitro model of elastic fiber assembly in human pigmented epithelial cells
644
Development of a new index for the assessment of hydromorphological alterations of the Mediterranean rocky shore
645
Development of a new index to assess river regime impacts after dam construction
646
Development of a New Indirect ELISA Method for Detection of Anti-Tuberculosis Antibodies in Human Serum
647
Development of a new inexpensive green thermoplastic composite and evaluation of its physico-mechanical and wear properties
648
Development of a new integrated method for generation of IDF curves based on three scenarios of climatic changes
649
Development of a new integrated surrogate safety measure for applying in intelligent vehicle systems
650
Development of a New Interferometric Measurement System for Determining the Main Characteristics of Gauge Blocks
651
Development of a new ion-selective field-effect transistor sensor for anionic surfactants: Application to potentiometric titrations Original Research Article
652
Development of a new jet mill for very fine mineral grinding
653
Development of a new laboratory evaporation measurement device as decision support for evaporation-optimized building
654
Development of a new lapping method for high precision ball screw (1st report)-feasibility study of a prototyped lapping tool for automatic lapping process
655
Development of a new lapping method for high precision ball screw (2nd report): Design and experimental study of an automatic lapping machine with in-process torque monitoring system
656
Development of a new lean burning combustor with fuel film evaporation for a micro gas turbine
657
Development of a new lean lubrication system for near dry machining process
658
Development of a new linker for the solid-phase synthesis of N-hydroxylated and N-methylated secondary amines
659
Development of a new LOPAP instrument for the detection of O3 in the atmosphere
660
Development of a new low-cost procedure for wind farm maintenance with a view to decrease soil pollution
661
Development of a new low-temperature methanol synthesis process
662
Development of a new magnesium alloy ZW21
663
Development of a new management strategy for the control of root-knot nematodes (Meloidogyne spp) in organic vegetable production
664
Development of a new masters program for occupational physicians in Flanders
665
Development of a new mathematical model for inactivation of Escherichia coli O157:H7 and Staphylococcus aureus by high hydrostatic pressure in carrot juice and peptone water Original Research Article
666
Development of a new mechanism to change velocity in a helical swimmer robot at low Reynolds number
667
Development of a new meshless — point weighted least-squares (PWLS) method for computational mechanics
668
Development of a New Method Based on Chiral Ligand-Exchange Chromatography for the Enantioseparation of Propranolol
669
Development of a New Method for Analysis of Oil Mists
670
Development of a new method for determination of aluminum (Al) in Jordanian foods and drinks: Solid phase extraction and adsorption of Al3+-d-mannitol on carbon nanotubes
671
Development of a new method for determination of aluminum (Al) in Jordanian foods and drinks: Solid phase extraction and adsorption of Al3+-d-mannitol on carbon nanotubes
672
Development of a new method for determination of exopolysaccharide quantity in fermented milk products and its application in technology of kefir production
673
Development of a new method for determination of total haem protein in fish muscle
674
Development of a new method for evaluating cyclone efficiency
675
Development of a new method for evaluating vortex length in reversed flow cyclone separators
676
Development of a new method for fast measurement of water sorption isotherms in the high humidity range Validation on gelatine gel Original Research Article
677
Development of a new method for sperm RNA purification in the chicken
678
Development of a new method for sulfide determination by vapor generator–inductively coupled plasma–mass spectrometry
679
Development of a new method for sulfide determination by vapor generator–inductively coupled plasma–mass spectrometry
680
Development of a new method for the determination of nitrosamines by micellar electrokinetic capillary chromatography
681
Development of a new method for the enantiomer specific determination of HBCD using an ion trap mass spectrometer Original Research Article
682
Development of a new method for the noninvasive measurement of deep body temperature without a heater
683
Development of a New Method in Exergy Analysis of a CSP Plant
684
Development of a New Method of Sensitivity Matrix for Image Reconstruction in Electric Charge Tomography System Using Finite Element Method
685
Development of a new method to estimate the regional and local contributions to black carbon
686
development of a new methodology for lincomycin.hci (lino.hci) determination using phosphomolybdic acid (pma) as a reagent and isnag-fluorimeter instrument via cfia
687
Development of a new methodology to integrate ELV treatment limits into requirements for metal automotive part design
688
Development of a new methodology to obtain the characteristic pump curves that minimize the total cost at pumping stations
689
Development of a new micro reaction sampler for pyrolysis-GC/MS system facilitating on-line analytical chemolysis of intractable condensation polymers
690
Development of a new micro reaction sampler for pyrolysis-GC/MS system facilitating on-line analytical chemolysis of intractable condensation polymers
691
Development of a new microextraction method based on a dynamic single drop in a narrow-bore tube: Application in extraction and preconcentration of some organic pollutants in well water and grape juice samples
692
Development of a new microextraction method based on elevated temperature dispersive liquid–liquid microextraction for determination of triazole pesticides residues in honey by gas chromatography-nitrogen phosphorus detection
693
Development of a new micromixer based on split/recombination for mass production and its application to soap free emulsifier
694
Development of a New Microreactor Based on Annular Microsegments for Fine Particle Production
695
Development of a new minimum avoidance system for a behavior-based mobile robot
696
Development of a New Mining Intrinsically Safe DC Electrical Prospecting Apparatus
697
Development of a new model for biodiesel viscosity prediction based on the principle of corresponding state
698
Development of a new model of actinic enteritis in rats using a cobalt-60 open source and a protection device as a collimator
699
Development of a New Model to Estimate the Technical Quality of Sugar Beet in the Semi – Arid Climate
700
Development of a new model to predict gas viscosity using artificial neural networks
701
Development of a new model to predict indoor daylighting: Integration in CODYRUN software and validation
702
Development of a new moisture transfer (Bi–Re) correlation for food drying applications
703
Development of a new molecular dynamics method for tribochemical reaction and its application to formation dynamics of MoS2 tribofilm
704
Development of a new monoclonal antibody based direct competitive enzyme-linked immunosorbent assay for detection of brevetoxins in food samples
705
Development of a new monoclonal antibody to ovine chimeric IgE and its detection of systemic and local IgE antibody responses to the intestinal nematode Trichostrongylus colubriformis
706
Development of a new monoclonal antibody to ovine chimeric IgE and its detection of systemic and local IgE antibody responses to the intestinal nematode Trichostrongylus colubriformis
707
Development of a new Monte Carlo simulation system on positron behavior in matter
708
Development of a new multi-grid-type microstrip gas chamber
709
Development of a new multi-grid-type microstrip gas chamber
710
Development of a new multiple sampling trawl with autonomous opening/closing net control system for sampling juvenile pelagic fish
711
Development of a new multi-residue laser diode thermal desorption atmospheric pressure chemical ionization tandem mass spectrometry method for the detection and quantification of pesticides and pharmaceuticals in wastewater samples Original Research Artic
712
Development of a new neuropsychological test battery
713
Development of a new neutron monitor using a boron-loaded organic liquid scintillation detector
714
Development of a new neutron monitor using a boron-loaded organic liquid scintillation detector
715
Development of a new niobium-based alloy for vascular stent applications
716
Development of a new non-destructive testing technique for quantitative evaluations of delamination defects in concrete structures based on phase delay measurement using lock-in thermography
717
Development of a new nonlinear numerical material model for woven composite materials accounting for permanent deformation and damage
718
Development of a new oat-based probiotic drink
719
Development of a new off-line test procedure for low voltage rotating machines fed by adjustable speed drives (ASD)
720
Development of a new on-line mass spectrometer to study the reactivity of soluble organic compounds in the aqueous phase under tropospheric conditions: Application to OH-oxidation of N-methylpyrrolidone
721
Development of a new on-line synchronous generator simulator using personal computer for excitation system studies
722
Development of a new on-line system for the sequential speciation and determination of chromium species in various samples using a combination of chelating and ion exchange resins
723
Development of a new organic composite coating for enhancing corrosion resistance of 55% Al–Zn alloy coated steel sheet
724
Development of a new oxidation stability test method for lubricating oils using high-pressure differential scanning calorimetry
725
Development of a new peel-stopper for sandwich structures
726
Development of a new photo-detector readout technique for PET and CT imaging
727
Development of a new photo-detector readout technique for PET and CT imaging
728
Development of a new photoinitiation system for dental light-cure composite resins
729
Development of a new photomultiplier tube with high sensitivity for a wavelength-shifter fiber readout
730
Development of a new photomultiplier tube with high sensitivity for a wavelength-shifter fiber readout
731
Development of a new photopolymerizable membrane for monochloroacetate sensitive potentiometric sensors Original Research Article
732
Development of a new pH-swing CO2 mineralization process with a recyclable reaction solution
733
Development of a new pilot scale production of high grade oil palm plywood: Effect of pressing pressure
734
Development of a new plasticizer for poly(ethylene oxide)-based polymer electrolyte and the investigation of their ion-pair dissociation effect
735
Development of a new polymer membrane — PVB/PVDF blended membrane
736
Development of a new porous metal support of metallic dense membrane for hydrogen separation
737
Development of a new precision internal machining process using an alternating magnetic field
738
Development of a new predictive modelling technique to find with confidence equivalence zone and design space of chromatographic analytical methods
739
Development of a new procedure for precise determination of viral aerosol lethal dose (ALD50) for birds
740
Development of a new procedure for the experimental determination of the Forming Limit Curves
741
Development of a new process in high functioning ceramic core without shape deformation
742
Development of a new protein labeling strategy, oxidation labeling. part 1: Preliminary evaluation and synthesis of tautomycin containing a metal coordinating unit
743
Development of a new protocol for the isolation and quantification of Arcobacter species from poultry products
744
Development of a new proximate analysis based correlation to predict calorific value of coal
745
Development of a New Psychometric Assessment Tool for Predicting Hepatitis B Virus Infection in Pregnant Women
746
Development of a new quadratic shell element considering the normal stress in the thickness direction for simulating sheet metal forming
747
Development of a new quadrilateral thin plate element using area coordinates Original Research Article
748
Development of a new qualification method for photocatalytically active surfaces based on a solid state luminescent dye
749
Development of a new quality fair access best value performance indicator (BVPI) for recycling services
750
Development of a new quantification method for a fire PSA
751
Development of a new quantification method for a fire PSA
752
Development of a new quantification method using partial volume effect correction for individual energy peaks in 111In-pentetreotide SPECT/CT
753
Development of a new QuEChERS method based on dry ice for the determination of 168 pesticides in paprika using tandem mass spectrometry
754
Development of a new radiation detector utilizing carbon nanotube as anode
755
Development of a new radiation detector utilizing CNTs as anodes
756
Development of a new radioligand for cholecystokinin receptor subtype 2 scintigraphy: From molecular modeling to in vivo evaluation Original Research Article
757
Development of a new rapid characterization method of hobʹs wear resistance in gear manufacturing—Application to the evaluation of various cutting edge preparations in high speed dry gear hobbing
758
Development of a new rapid method to measure erosion rates in laboratory and pilot plant cyclones
759
Development of a new reflectance technique to investigate the mechanism of emulsification Original Research Article
760
Development of a new rotary demister
761
Development of a New RP-UPLC Method for the Determination of Rabeprazole Sodium in Pharmaceutical Formulation and Application in Dissolution Studies
762
Development of a new sample pretreatment procedure based on pressurized liquid extraction for the determination of fluoroquinolone residues in table eggs
763
Development of a new sample pre-treatment procedure based on pressurized liquid extraction for the determination of metals in edible seaweed Original Research Article
764
Development of a new self-awareness of falls risk measure (SAFRM)
765
Development of a new semi analytical model for prediction of bubble point pressure of crude oils
766
Development of a New Sensitive Electrochemical Sensor for Dapsone Detection using a Cobalt Metal-Organic Framework/Molecularly Imprinted Polymer Nanostructures
767
Development of a new sequential block finding strategy for detection of conserved sequences in riboswitches
768
Development of a new sequential injection in-line cloud point extraction system for flame atomic absorption spectrometric determination of manganese in food samples
769
Development of a new series of polyamine-type polymeric surfactants used for emulsion liquid membranes
770
Development of a new simulation model of spin coating process and its application to optimize the 450 mm wafer coating process
771
Development of a new skeletal mechanism for n-decane oxidation under engine-relevant conditions based on a decoupling methodology
772
Development of a new software for adaptive crack growth simulations in 3D structures
773
Development of a New Software to Transmit the Audio Signals without Server-Based
774
Development of a new solar thermal engine system for circulating water for aeration
775
Development of a new spray/wall interaction model
776
Development of a new structural prepreg: characterisation of handling, drape and tack properties
777
Development of a new styrene copolymer membrane for recycling of polyester fibre dyeing effluent
778
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics
779
Development of a New SWOT-MCDM Model to Create Marketing and Financial Strategies in Conditions of Uncertainty (Case Study of Iralco Company)
780
Development of a new synthesized adsorbent for refrigeration and air conditioning applications
781
Development of a new system for improving blastability by using the Fuzzy Delphi AHP method
782
Development of a new technique to predict reverse osmosis fouling
783
DEVELOPMENT OF A NEW TECHNOLOGY FOR ELECTRO/IMPULSE HARDENING OF TOOL STEELS
784
Development of a new technology for the production of microcapsules based in atomization processes
785
Development of a new technology of deformable mirror for ultra intense laser applications
786
Development of a new technology of deformable mirror for ultra intense laser applications
787
Development of a new technology product evaluation model for assessing commercialization opportunities using Delphi method and fuzzy AHP approach
788
Development of a new temperature measuring system for gas–liquid flow in spraying field
789
Development of a new ternary photoluminescence enhancement system of Eu–N-(2-hydroxy-1-naphthaldehyde)-1,8-diaminonaphthalene–1,10-phenanthroline for trace determination of Eu3+
790
Development of a new test system to determine penetration of multi-walled carbon nanotubes through filtering facepiece respirators
791
Development of a new tissue-equivalent material applied to optimizing surgical accuracy
792
Development of a new tool for the selection of pervaporation membranes for the separation of fusel oils from ethanol/water mixtures
793
Development of a new total reflection X‐ray fluorescence instrument using polycapillary X‐ray lens
794
Development of a new traceable areal surface texture measuring instrument
795
Development of a new traceless aniline linker for combinatorial solid-phase parallel synthesis of rod-shaped liquid crystals with an azomethine linkage
796
Development of a new traceless aniline linker for solid-phase synthesis of azomethines. Application to parallel synthesis of a rod-shaped liquid crystalline library
797
Development of a New Truss Quadratic Quadrilateral Macro-Element
798
Development of a new two-dimensional position-sensitive detection based on resistive charge division and using CdTe detectors for a high-resolution semiconductor-based PET scanning
799
Development of a new two-dimensional position-sensitive detection based on resistive charge division and using CdTe detectors for a high-resolution semiconductor-based PET scanning
800
Development of a New Two-Phase Fluid Atomizer Nozzle in Pilot Scale for Fluid Catalytic Cracking Process
801
Development of a new type of electric off-road vehicle powered by microwaves transmitted through air
802
Development of a new type of imaging plate for neutron detection
803
Development of a new type of imaging plate for neutron detection
804
Development of a new type of SiGe thin strain relaxed buffer based on the incorporation of a carbon-containing layer
805
Development of a new type of thermogravimetric analyser with a mini-tapered fluidized bed. Effect of fluidization of particles on the stability of the system
806
Development of a new ultrafine grained dual phase steel and examination of the effect of grain size on tensile deformation behavior
807
Development of a new ultraporous polymer as support in organic synthesis
808
Development of a New Variable Remote Center Compliance (VRCC)With Modified Elastomer Shear Pad (ESP) for Robot Assembly
809
Development of a new variable repetitive group sampling plan based on EWMA yield index
810
Development of a new-type suspension spring for rally cars
811
Development of a nickel–polymer composite by using friendly environmental polymeric surfactant
812
Development of a niobium clad PEM fuel cell bipolar plate material
813
Development of a NMLFPE (non-monochromatic lightwave Fabry-Perot etalon) for smart structure sensor applications
814
Development of a NMLFPE (non-monochromatic lightwave Fabry-Perot etalon) for smart structure sensor applications
815
Development of a NO2 scrubber for accurate sampling of ambient levels of terpenes
816
Development of a nodal effective load model considering transmission system element unavailabilities
817
Development of a Noise Prediction Model Based on Advanced Fuzzy Approaches in Typical Industrial Workrooms
818
Development of a noise sources classification system based on new method for feature selection
819
Development of a non lethal sampling method to monitor immune response and disease progression in salmonid fish
820
Development of a non-adiabatic two-coil spin flipper for a polarised thermal neutron diffractometer with a 3He spin filter
821
Development of a non-adiabatic two-coil spin flipper for a polarised thermal neutron diffractometer with a 3He spin filter
822
Development of a non-chromatographic method for the speciation analysis of inorganic antimony in mushroom samples by hydride generation atomic fluorescence spectrometry
823
Development of a non-chromatographic method for the speciation analysis of inorganic antimony in mushroom samples by hydride generation atomic fluorescence spectrometry
824
Development of a non-commercial sugar-free barbecue sauce
825
Development of a non-competitive immunoassay for cortisol and its application to the analysis of saliva Original Research Article
826
Development of a non-competitive immunoassay for monitoring DDT, its metabolites and analogues in water samples
827
Development of a non-competitive immunoassay for monitoring DDT, its metabolites and analogues in water samples Original Research Article
828
Development of a non-denaturing 2D gel electrophoresis protocol for screening in vivo uranium-protein targets in Procambarus clarkii with laser ablation ICP MS followed by protein identification by HPLC–Orbitrap MS
829
Development of a non-derivatization high-performance liquid chromatography method with resonance Rayleigh scattering detection for the detection of sisomicin in rat serum
830
Development of a non-destructive neutron radiography technique to measure the three-dimensional soot deposition profiles in diesel engine exhaust systems
831
Development of a non-destructive salt and moisture measurement method in salmon (Salmo salar) fillets using impedance technology
832
Development of a non-destructive testing technique using ultrasonic wave for evaluation of irradiation embrittlement in nuclear materials
833
Development of a non-ideal plasma target for non-linear beam–plasma interaction experiments
834
Development of a non-ideal plasma target for non-linear beam–plasma interaction experiments
835
Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting: Effect of the process parameters
836
Development of a Non-Invasive Bio-Acoustics Measurement System for Assessing Articular Cartilage Knee Joint Problem
837
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method
838
Development of a non-labeled immunosensor for the herbicide trifluralin via optical waveguide lightmode spectroscopic detection Original Research Article
839
Development of a Non-linear Levels Model and its Application to Bora-driven Circulation on the Adriatic Shelf
840
Development of a nonlinear near-wall turbulence model for turbulent flow and heat transfer
841
Development of a non-linear triangular prism solid-shell element using ANS and EAS techniques
842
Development of a Non-Radial Network Model to Evaluate the Performance of a Multi-Stage Sustainable Supply Chain
843
Development of a Non-radioactive Dot-blot Hybridisation Assay for the Detection of Pelargonium Flower Break Virus and Pelargonium line Pattern Virus
844
Development of a non-radioactive endpoint in a modified local lymph node assay
845
Development of a non-reflecting boundary condition for multidimensional nonlinear duct acoustic computation
846
Development of a non-supervised and automatic method for detecting land cover changes in urban areas by using radar and optic data
847
Development of a non-triangular separation region for improving the performance of a three-zone simulated moving bed chromatography for binary separation with linear isotherms
848
Development of a non-uniform-current model for predicting transient thermal behavior of thermoelectric coolers
849
Development of a novel 2-stage entrained flow coal dry powder gasifier
850
Development of a novel 32P-postlabeling method for the analysis of 3′-azido-3′-deoxythymidine
851
Development of a novel 5-DOF controlled maglev local actuator for high-speed electrical discharge machining
852
Development of a novel 6351 Al–(Al4SiC4+SiC) hybrid composite with enhanced mechanical properties
853
Development of a novel albumin-binding prodrug that is cleaved by urokinase-type-plasminogen activator (uPA)
854
Development of a novel alkaline zinc–iron plating bath containing sorbitol and the chemical, physical and morphological characterization of the Zn–Fe films
855
Development of a novel aluminum-free glass ionomer cement based on magnesium/strontium-silicate glasses
856
Development of a novel amide-silica stationary phase for the reversed-phase HPLC separation of different classes of phytohormones
857
Development of a novel amperometric glucose biosensor based on copolymer of pyrrole-PAMAM dendrimers
858
Development of a novel analytical method for determination of chondroitin sulfate using an in-capillary enzyme reaction
859
Development of a Novel and Efficient HCDC Process for heterologous production of Ambystoma Mexicanum Epidermal Lipoxygenase (AmbLOXe) in E. coli
860
Development of a novel and specialized cultivation method for isolating Helicobacter pullorum from chicken meat
861
Development of a Novel Anti-Adhesive Vaccine Against Pseudomonas aeruginosa Targeting the C-terminal Disulfide Loop of the Pilin Protein
862
Development of a novel antimicrobial film based on chitosan with LAE (ethyl-Nα-dodecanoyl-l-arginate) and its application to fresh chicken
863
Development of a Novel Anti-Obesity Compound with Inhibiting Properties on the Lipid Accumulation in 3T3-L1 Adipocytes
864
Development of a novel approach for secondary modelling in predictive microbiology: incorporation of microbiological knowledge in black box polynomial modelling
865
Development of a novel approach to determine heating pattern using computer vision and chemical marker (M-2) yield Original Research Article
866
Development of a novel approach, the epigenome-based outlier approach, to identify tumor-suppressor genes silenced by aberrant DNA methylation
867
Development of a novel articulator that reproduced jaw movement with six-degree-of-freedom
868
Development of a Novel Basket Impeller Dualflow Tray Catalytic Distillation Reactor
869
Development of a novel binder system for manufacture of ceramic heart valve prostheses
870
Development of a novel binderless diamond grinding wheel for machining IC chips for failure analysis
871
Development of a novel bioassay for evaluating of the infectivity and between generation transmission effects of entomopathogenic fungi Beauvaria bassiana (Balsamo) Vuilleminon on population of Sawtoo
872
DEVELOPMENT OF A NOVEL BIOBEVERAGE – BIOFEVITA
873
Development of a novel biosensor based on a conducting polymer
874
Development of a novel candidate subunit vaccine against Grass carp reovirus Guangdong strain (GCRV-GD108)
875
Development of a novel cascading TPV and TE power generation system
876
Development of a novel catalytic burner for natural gas combustion for gas stove and cooking plate applications
877
Development of a novel catalytic distillation column
878
Development of a novel cathodic plasma/electrolytic deposition technique part 1: Production of titanium dioxide coatings
879
Development of a novel cathodic plasma/electrolytic deposition technique: Part 2: Physico-chemical analysis of the plasma discharge
880
Development of a novel chemical water shut-off method for fractured reservoirs: Laboratory development and verification through core flow experiments
881
Development of a novel chemiluminescent probe, 4-(5ʹ,6ʹ-Dimethoxybenzothiazolyl) phthalhydrazide
882
Development of a novel chromosome dissection chip for chromosomal analysis with nanometer size
883
Development of a novel chromosome dissection chip for chromosomal analysis with nanometer size
884
Development of a novel collagen–GAG nanofibrous scaffold via electrospinning
885
Development of a novel colorimetric indicator label for monitoring freshness of intermediate-moisture dessert spoilage
886
Development of a novel colorimetric indicator pad for detecting aldehydes
887
Development of a Novel Combined Catalyst and Sorbent for Hydrocarbon Reforming
888
Development of a novel combustion synthesis method for synthesizing of ceramic oxide powders
889
Development of a novel common-rail type Dimethyl ether (DME) injector
890
Development of a novel composite aluminum anode
891
Development of a novel computational tool for optimizing the operation of fuel cells systems: Application for phosphoric acid fuel cells
892
Development of a novel decal transfer process for fabrication of high-performance and reliable membrane electrode assemblies for PEMFCs
893
Development of a novel dental shade determination application
894
Development of a novel device for applying uniform doses of electron beam irradiation on carcasses
895
Development of a novel direction-position sensing fast neutron detector using tensioned metastable fluids
896
Development of a novel direction-position sensing fast neutron detector using tensioned metastable fluids
897
Development of a novel DNA detection system for real-time detection of DNA hybridization
898
Development of a novel DNA detection system for real-time detection of DNA hybridization
899
DEVELOPMENT OF A NOVEL DRUG-COATED STENT USING CURCUMIN AS ANTIPROLIFERATIVE DRUG
900
Development of a Novel Echocardiography Ramp Test for Speed Optimization and Diagnosis of Device Thrombosis in Continuous-Flow Left Ventricular Assist Devices: The Columbia Ramp Study
901
Development of a novel economical device to improve post-harvest processing practices on small farms
902
Development of a novel electric field-assisted modified hydrodynamic cavitation system for disintegration of waste activated sludge
903
Development of a novel electric field-assisted modified hydrodynamic cavitation system for disintegration of waste activated sludge
904
Development of a novel electrochemical cell for slab optical waveguide spectroscopy for in situ observation of methylene blue and anions on an electrode/electrolyte interface
905
Development of a novel electrokinetically driven microfluidic immunoassay for the detection of Helicobacter pylori Original Research Article
906
Development of a novel electrophoresis-UV grafting technique to modify PES UF membranes used for NOM removal
907
Development of a novel ELISA for human insulin using monoclonal antibodies produced in serum-free cell culture medium
908
Development of a novel enzyme/semiconductor nanoparticles system for biosensor application
909
Development of a novel epitaxial-layer segmentation method for optoelectronic device fabrication
910
Development of a novel europium(III) complex-based luminescence probe for time-resolved luminescence imaging of the nitric oxide production in neuron cells
911
Development of a Novel Floating In-situ Gelling System for Stomach Specific Drug Delivery of the Narrow Absorption Window Drug Baclofen
912
Development of a novel flow injection liquid–liquid microextraction method for the on-line separation and preconcentration for determination of zinc(II) using 5-(8-hydroxy-2-quinolinylmethyl)-2,8-dithia-5-aza-2,6-pyridinophane as a sensitive and selective
913
Development of a novel fluidized bed ash cooler for circulating fluidized bed boilers: Experimental study and application
914
Development of a novel fluorescent probe for fluorescence correlation spectroscopic detection of kinase inhibitors
915
Development of a novel fluorescent sensor to detect a specific range of pH
916
Development of a novel fluorescent tag O-2-[aminoethyl]fluorescein for the electrophoretic separation of oligosaccharides Original Research Article
917
Development of a novel fluorimetric bulk optode membrane based on meso-tetrakis(2-hydroxynaphthyl) porphyrin (MTHNP) for highly sensitive and selective monitoring of trace amounts of Hg2 + ions
918
Development of a novel gas sensor based on oxide thick films
919
Development of A Novel Gene Expression System for Secretory Production of Heterologous Proteins via the General Secretory (Sec) Pathway in Corynebacterium glutamicum
920
Development of a novel gene transfer system for Cajanus cajan and expression of a monocot arginine decarboxylase cDNA in transformed cell lines
921
Development of a Novel Growth Model Based on the Central Limit Theorem for the Determination of Beef Spoilage
922
Development of a Novel Hapten for Radioimmunoassay of the Lignan, Enterolactone in Plasma (Serum). Total Synthesis of (±)-trans-5-Carboxymethoxyenterolactone and Several Analogues
923
Development of a novel high optical quality ZnO thin films by PLD for III–V opto-electronic devices
924
Development of a novel high performance filtration system — Application for various hardly filterable materials
925
Development of a novel high performance filtration system — Optimization of operating conditions
926
Development of a novel high speed (electron-mobility) epi-n-ZnO thin films by L-MBE for III–V opto-electronic devices
927
Development of a novel high volume band compression injector for the analysis of complex samples like toxaphene pesticide
928
Development of a Novel Human Single Chain Antibody Against EGFRVIII Antigen by Phage Display Technology
929
Development of a novel hybrid aluminum-based composite with enhanced properties
930
Development of a novel hydrate-based refrigeration system: A preliminary overview
931
Development of a novel hydrophobic/hydrophilic double micro porous layer for use in a cathode gas diffusion layer in PEMFC
932
Development of a novel inherently stabilised honeycomb-type membrane module Original Research Article
933
Development of a Novel Inhibitory Chimeric Anti-HER2 Monoclonal Antibody
934
Development of a novel integrated continuous reactor system for biocatalytic production of biodiesel
935
Development of a novel ion energy analyser to measure the energy distribution function f(v∩, v|) of end-loss ions from FRC plasmas
936
Development of a novel ionic support and its application in the ionic liquid phase assisted synthesis of a potent antithrombotic
937
Development of a novel ketoprofen transdermal patch: Effect of almond oil as penetration enhancers on in-vitro and ex-vivo penetration of ketoprofen through rabbit skin
938
Development of a novel label-free amperometric immunosensor for the detection of okadaic acid Original Research Article
939
Development of a novel label-free amperometric immunosensor for the detection of okadaic acid Original Research Article
940
Development of a novel lateral force-sensing microindentation technique for determination of interfacial bond strength Original Research Article
941
Development of a novel LC/MS method to quantitate cellular stearoyl-CoA desaturase activity Original Research Article
942
Development of a novel LC–MS/MS method for the determination of letosteine in human plasma and its application on pharmacokinetic studies
943
Development of a novel liquid chromatography — Evaporative light scattering detection method for bacitracins and applications to quality control of pharmaceuticals Original Research Article
944
Development of a novel live vaccine delivering enterotoxigenic Escherichia coli fimbrial antigens to prevent post-weaning diarrhea in piglets
945
Development of a novel live vaccine delivering enterotoxigenic Escherichia coli fimbrial antigens to prevent post-weaning diarrhea in piglets
946
Development of a Novel Lot-sizing Model with Variable Lead Time in Supply Chain Environment
947
Development of a novel lot-sizing model with variable lead time in supply chain environment
948
Development of a novel low-flow ion source/sampling cone geometry for inductively coupled plasma mass spectrometry and application in hyphenated techniques
949
Development of a novel low-flow ion source/sampling cone geometry for inductively coupled plasma mass spectrometry and application in hyphenated techniques
950
Development of a novel macrostructured cathode for large-area neutron detectors based on the 10B-containing solid converter
951
Development of a novel macrostructured cathode for large-area neutron detectors based on the 10B-containing solid converter
952
Development of a novel magnesium–copper based composite with improved mechanical properties
953
Development of a novel market forecasting tool and its application to hydrogen energy production in Scotland
954
Development of a novel meshless Local Kriging (LoKriging) method for structural dynamic analysis Original Research Article
955
Development of a novel meso-scale vapor compression refrigeration system (mVCRS)
956
Development of a novel method based on liquid chromatography–evaporative light scattering detection for the direct determination of streptomycin and dihydrostreptomycin in raw materials, pharmaceutical formulations, culture media and plasma
957
Development of a novel method combining HPLC fingerprint and multi-ingredients quantitative analysis for quality evaluation of traditional chinese medicine preparation
958
Development of a novel method for Copper sorption: An application of Taguchi Method
959
Development of a novel method for detecting the integrity of aseptic paperboard laminate packages containing aluminium foil
960
Development of a novel method for hot-pressure extraction of protein from chicken bone and the effect of enzymatic hydrolysis on the extracts
961
Development of a novel method for isolating and detecting Cryptosporidium parvum from lean and fat beef carcass surfaces Original Research Article
962
Development of a novel method for mechanical plating using ultrasonic vibrations
963
Development of a novel method for monitoring the antioxidative effect of ascorbic acid in rat blood
964
Development of a novel method for screening of estrogenic compounds using nano-sized bacterial magnetic particles displaying estrogen receptor Original Research Article
965
Development of a novel method for surgical implant design optimization through noninvasive assessment of local bone properties
966
Development of a Novel Method in TRMC for a Binary Gas Flow Inside a Rotating Cylinder
967
Development of a novel method of tube bending using finite element simulation
968
Development of a novel method to measure the film thickness of cured can coatings Original Research Article
969
Development of a novel method to prepare Fe- and Al-doped TiO2 from wastewater
970
Development of a novel methodology for indoor emission source identification
971
Development of a Novel Methodology To Validate Optimal Sterilization Conditions for Maximizing the Texture Quality of White Beans in Glass Jars
972
Development of a Novel Methodology To Validate Optimal Sterilization Conditions for Maximizing the Texture Quality of White Beans in Glass Jars
973
Development of a novel microarray methodology for the study of SNPs in the promoter region of the TNF-α gene—Their association with obstructive pulmonary disease in Greek patients
974
Development of a novel micro-assay for evaluation of peroxyl radical scavenger capacity: Application to carotenoids and structure–activity relationship
975
Development of a novel microextraction by packed sorbent-based approach followed by ultrahigh pressure liquid chromatography as a powerful technique for quantification phenolic constituents of biological interest in wines
976
Development of a Novel Modular and Agile Face Machining Technology
977
Development of a novel mouse osteoclast culture system including cells of mandibular body and erupting teet h
978
Development of a novel multi-capillary, multi-temperature commercial refrigerator cabinet with common low-pressure receiver
979
Development of a Novel Multi-Epitope Vaccine Candidate against Streptococcus Iniae Infection in Fish: An Immunoinformatics Study
980
Development of a novel multiplex PCR assay for the identification of Salmonella enterica Typhimurium and Enteritidis
981
Development of a novel MWCNTs–triazene-modified carbon paste electrode for potentiometric assessment of Hg(II) in the aquatic environments
982
Development of a Novel Niosomal Formulation for Gabapentin
983
Development of a novel nucleoside analogue with S-type sugar conformation: 2′-deoxy-trans-3′,4′-bridged nucleic acids
984
Development of a novel optimization tool for electron linacs inspired by artificial intelligence techniques in video games
985
Development of a novel optimization tool for electron linacs inspired by artificial intelligence techniques in video games
986
Development of a novel particle size control system for hammer milling
987
Development of a novel phase-field method for local stress-based shape and topology optimization
988
Development of a novel photocatalytic reaction system for oxidative decomposition of volatile organic compounds in water with enhanced aeration
989
Development of a novel pixel-level signal processing chain for fast readout 3D integrated CMOS pixel sensors
990
Development of a novel pixel-level signal processing chain for fast readout 3D integrated CMOS pixel sensors
991
Development of a novel portable-size PEMFC short stack with electrodeposited Pt hydrogen diffusion anodes
992
Development of a novel pressure sensing material based on polypyrrole-coated electrospun poly(vinylidene fluoride) fibers
993
Development of a novel pressure swing adsorption dehydration system for the preservation of dermal tissue
994
Development of a Novel Probiotic Yogurt “PENTOYO” with a Fully Sequenced Lactobacillus pentosus KCA1 and its Survival during Storage at 4°C
995
Development of a novel process for biodiesel production from palm fatty acid distillate (PFAD)
996
Development of a novel pulse wave velocity measurement system: Using dual piezoelectric elements
997
Development of a novel PVC-membrane fluorescent sensor based on N,N′-bis(dansylamidoethyl)-N,N′-bis(2-pyridylmethyl)propylene-diamine as a new fluoroionophore for highly sensitive and selective monitoring of trace amounts of La3+ ions in aqueous solutions
998
Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products
999
Development of a novel pyrolysis-gas chromatography/mass spectrometry method for the analysis of poly(lactic acid) thermal degradation products
1000
Development of a novel radial cathode flow field for PEMFC