Title List مقالات لاتين فني مهندسي Incorporation of active RF circuit elements into additively manufactured substrates Increasing efficiency of an DSP-controlled converter by on-the-fly changing of the gate drive method

بر اساس عنوان

1

Incorporation of active RF circuit elements into additively manufactured substrates

2

Incorporation of adaptive interference cancellation into parallel interference cancellation

3

Incorporation of adaptive mutation based on subjective evaluation in an interactive evolution strategy

4

Incorporation of an advanced evaluation criteria in an expert system for the creation and evaluation of planned switching sequences

5

Incorporation of an engineering mobility model in an accurate analytical I-V description for SOI devices

6

Incorporation of an external heat flux computation module to an in-house code for the thermal analysis of satellites

7

Incorporation of antenna primary beam patterns in radio-interferometric data reduction to produce wide-field, high-dynamic-range images

8

Incorporation of Anti-Jamming Techniques in a GPS Receiver

9

Incorporation of Aspects of Systems Security and Software Security in Senior Capstone Projects

10

Incorporation of autonomous control elements in combination control of remote operation and autonomous control

11

Incorporation of AUTOSAR in an Embedded Systems Development Process: A Case Study

12

Incorporation of Axial System Response in Iterative Reconstruction from Axially Compressed Data of a Cylindrical Scanner using On-the-Fly Computing

13

Incorporation of Backscattering Into FAFFA Analysis of UHF Wave Propagation Over Irregular Terrain

14

Incorporation of Biological Pathway Knowledge in the Construction of Priors for Optimal Bayesian Classification

15

Incorporation of biorthogonality into lapped transforms for audio compression

16

Incorporation of both pre-conceptual schemas and goal diagrams in CRISP-DM

17

Incorporation of bromine into Si-SiO2 interfaces and effects on interface state distribution

18

Incorporation of cloud radiance effects into hyperspectral target detection

19

Incorporation of colloidal quantum dots into silicon photonic structures

20

Incorporation of computerized blood product labeling in hospital information system

21

Incorporation of Conductor Loss in the Unconditionally Stable ADI-FDTD Method

22

Incorporation of copper into indium gallium selenide layers from solution

23

Incorporation of correlated structural images in PET image reconstruction

24

Incorporation of Cross-Terms in Memory Polynomial Using Evolutionary Algorithm for Accurate Behavioral Modeling of RF Power Amplifiers

25

Incorporation of data-mining in protection technology for high impedance fault detection

26

Incorporation of demand response resources in resource investment analysis

27

Incorporation of derivative priors in adaptive Bayesian color image segmentation

28

Incorporation of detailed HVDC dynamics into transient energy functions

29

Incorporation of Deuterium into the Buried Oxide of Simox Structures

30

Incorporation of diffraction effects in simulations of ultrasonic systems using PSpice models

31

Incorporation of diffusion tensor anisotropy in brain deformation models for updating preoperative images to improve image-guidance

32

Incorporation of direct current superposition as a means for high quality contact and slotted contact structures utilizing litho-freeze-litho-etch

33

Incorporation of dynamic parameters in hybrid feature-based Bangla phoneme recognition using multilayer Neural Networks

34

Incorporation of dynamic voltage stability constraints in the ATC determination of power system

35

Incorporation of dynamic voltage stability constraints in the ATC determination of power system

36

Incorporation of edge conditions in moment method solutions

37

Incorporation of elastic transformations in list-mode based reconstruction for respiratory motion correction in PET

38

Incorporation of ENDF-V neutron cross section data for calculating neutron-induced single event upsets

39

Incorporation of enhanced texture/transition modeling tools into a synthetic image generation model

40

Incorporation of Equipment Simulation into Integrated Feature Scale Profile Evolution

41

Incorporation of evidences into an intelligent computational argumentation network for a web-based collaborative engineering design system

42

Incorporation of Exact Boundary Conditions into a Discontinuous Galerkin Finite Element Method for Accurately Solving 2D Time-Dependent Maxwell Equations

43

Incorporation of expert estimates in the Weibull representation of age-dependent reliability

44

Incorporation of explicit transmission coefficients in the wave propagation model enhances the results of Bayesian analysis of fast and slow wave propagation in cancellous bone

45

Incorporation of FACTS into transients programs for system simulation

46

Incorporation of feed-network modeling into the time-domain finite element analysis of antennas

47

Incorporation of ferromagnetic metallic films in planar transmission lines for microwave device applications

48

Incorporation of fiber-optic sensors in concrete specimens: testing and evaluation

49

Incorporation of finite element analysis into annual energy loss estimation for permanent magnet wind turbine generators

50

Incorporation of Finite-Element Analysis Into Annual Energy Loss Estimation for Permanent-Magnet Wind Turbine Generators

51

Incorporation of first-order polarization coupling in UHF propagation over gently undulating terrain using a perfect reflecting surface model

52

Incorporation of fixed speed wind farms in power flow analysis

53

Incorporation of flexible pyridine-functionalized ligands into discrete supramolecules via coordination-driven self-assembly

54

Incorporation of flow and QoS control in multicast routing architectures

55

Incorporation of fluorescent dyes for efficient organic photovoltaic cell

56

Incorporation of flux balance analysis in pre-β-oxidation network to detect carnitine translocase in the cardiac cell in homo sapiens

57

Incorporation of frequency-dependent multiport lumped networks into a hybrid time-domain finite-element solver

58

Incorporation of frequency-dependent multiport macromodels into a fast time-domain integral equation solver

59

Incorporation of freshman engineering projects

60

Incorporation of fuel limitations and environmental constraints in production simulation models

61

Incorporation of fuzzy classification properties into backpropagation learning algorithm

62

Incorporation of geometrical information to identify cardiac structures in MRI

63

Incorporation of global positioning system into autonomous underwater vehicle navigation

64

Incorporation of gridded data into the analysis of remotely-sensed images: Basic quantitative strategy to analyze defoerestation by population growth

65

Incorporation of group III elements in chemical beam epitaxy of GaInAsP alloys

66

Incorporation of happiness into neutral speech by modifying emotive-keywords

67

Incorporation of hard excitation limits into power system normal form analysis

68

Incorporation of hard-fault-coverage in model-based testing of mixed-signal ICs

69

Incorporation of HCI: Classification of activity modeling

70

Incorporation of HCI: Usability validation in use cases through the activity taxonomy

71

Incorporation of high μβ chromophores into 3-D networks via double-end crosslinking (DEC)

72

Incorporation of Higher-Order Silane Radicals Into A-Si:H Films of High Stability Against Light Exposure

73

Incorporation of human dimension into the analysis of remotely-sensed images: a spatial model of deforestation

74

Incorporation of HVDC and SVC models in the Northern State Power Co. (NSP) network; for on-line implementation of direct transient stability assessment

75

Incorporation of Hydroxyapatite Sol Into Collagen Gel to Regulate the Contraction Mediated by Human Bone Marrow-Derived Stromal Cells

76

Incorporation of impedance boundary conditions into an advanced, integral equation, full-wave simulator

77

Incorporation of implementation imprecision in automotive control design

78

Incorporation of imprecise goal vectors into evolutionary multi-objective optimization

79

Incorporation of inductors in piecewise approximate circuit simulation

80

Incorporation of inhaled insulin into the FDA accepted University of Virginia/Padova Type 1 Diabetes Simulator

81

Incorporation of inorganic filler into the no-flow underfill material for flip-chip application

82

Incorporation of input glitches into power macromodeling

83

Incorporation of Internet distance education and problem based learning to facilitate creativity and problem solving ability of learners-Based on a RFID course

84

Incorporation of Iterative Forward Modeling Into the Principle Phase Decomposition Algorithm for Accurate Source Wave and Reflection Series Estimation

85

Incorporation of Kramers-Kronig relationships in the derivation of network representations for modeling and characterizing anisotropic materials

86

Incorporation of large stochastic sources in the power system

87

Incorporation of ligand–receptor binding-site models and transistor-based sensors for resolving dissociation constants and number of binding sites

88

Incorporation of linear constraints into the constant modulus algorithm

89

Incorporation of Linearized Sensitivities in the Ward Method of Equivalencing

90

Incorporation of Linearized Sensitivities in the Ward Method of Equivalencing

91

Incorporation of load models in load-flow studies. form of model effects

92

Incorporation of load models in the direct method of power system transient stability

93

Incorporation of MATLAB into a distributed behavioral robotics architecture

94

Incorporation of matlab-script based power electronics digital filtering and control algorithm into Simulink: A step closer to its microcontroller implementation

95

Incorporation of meaning to business management using vedic analogies

96

Incorporation of measured process variable to predictive functional controller

97

Incorporation of measurement uncertainty into optically-inspired measurement-to-track data association

98

Incorporation of meshless scheme with contrast source inversion method for reconstructing dielectric objects

99

Incorporation of mobile phones in small robotics applications like educational tool

100

Incorporation of Model-Based System and Software Development Environments

101

Incorporation of MODIS landcover data to improve land surface parameterization in the COAMPS numerical weather prediction model

102

Incorporation of motor control and motor learning principles into VR applications

103

Incorporation of MRI-AIF Information For Improved Kinetic Modelling of Dynamic PET Data

104

Incorporation of multimedia approaches to literature online via e-learning for foundation level literature courses: The case of a private institution of higher learning in Malaysia

105

Incorporation of multiple errors in reliability modeling of fault-tolerant systems

106

Incorporation of Multiport Lumped Networks Into the Hybrid Time-Domain Finite-Element Analysis

107

Incorporation of Multi-Resonator Crystals Into Filters for Quantity Productlon

108

Incorporation of N-1 Security into Optimal Power Flow for FACTS Control

109

Incorporation of Na in Cu(In,Ga)Se $_{\\bf 2}$ Thin-Film Solar Cells: A Statistical Comparison Between Na From Soda-Lime Glass and From a Precursor Layer of NaF

110

Incorporation of negative rules into fuzzy inference systems

111

Incorporation of nitrogen in group III-nitrides-arsenides grown by molecular beam epitaxy (MBE)

112

Incorporation of non-linear dynamics to the observability formulation of shipboard power systems

113

Incorporation of nonlinear load models in the transient energy function method

114

Incorporation of Nonlinear Load Models in the Transient Energy Function Method

115

Incorporation of Novel MEMS Tactile Sensors into Tissue Engineered Skin

116

Incorporation of novel underwater thrusters into vehicle control systems

117

Incorporation of Ontology-driven biological knowledge into cardiovascular genomics

118

Incorporation of optical enzymatic sensing chemistry into biocompatible hydrogels

119

Incorporation of optimal timeouts into distributed real-time load sharing

120

Incorporation of optimal timeouts into distributed real-time load sharing

121

Incorporation of ordinal optimization into learning automata for high learning efficiency

122

Incorporation of Partially Observable Evidence Into an Evidence Accrual Data Fusion Technique

123

Incorporation of patient displacement into a trunk reconstruction technique

124

Incorporation of Payload Uncertainties into Robot Trajectory Planning

125

Incorporation of Pentaphone-Context Dependency Based on Hybrid Hmm/Bn Acoustic Modeling Framework

126

Incorporation of Perceptually Energy-Compensated QIM into DWT-DCT Based Blind Audio Watermarking

127

Incorporation of phrase intonation to context clustering for average voice models in HMM-based Thai speech synthesis

128

Incorporation of plasma physics and plasma etching into the undergraduate microelectronics laboratory

129

Incorporation of polarimetric radar images into multisensor data sets

130

Incorporation Of Polarimetric Radar Images Into Multisensor Data Sets

131

Incorporation of polymer refractive microlens array for efficiency improvement of CuInS2 quantum dot-based hybrid photovoltaic cells

132

Incorporation of pre-classifier and nonlinear feature selection for tropical wood species recognition system

133

Incorporation of pre-engineering lessons into secondary science classrooms

134

Incorporation of prior knowledge in automatic classification of oil spills in ERS SAR images

135

Incorporation of prior knowledge of chip shapes in blind multiuser detection for DS-CDMA communication

136

Incorporation of protection system failures into bulk power system reliability assessment by Bayesian networks

137

Incorporation of Quantum Dots into 3D Photonic Crystals for Emission Control

138

Incorporation of rationing effects to hydrothermal dispatch optimization

139

Incorporation of rebound effect into energy efficient measures cost-benefit analysis model

140

Incorporation of relational modeling method into object-oriented analysis

141

Incorporation of reservation stations into the scheduling of DSP graphs onto heterogeneous multiprocessors

142

Incorporation of respiratory motion estimation within a map super-resolution algorithm for image enhancement in 4D PET

143

Incorporation of RF-adaptive array antenna into MIMO receivers

144

Incorporation of robustness properties into the observer based anti-windup scheme in the case of actuator uncertainties

145

Incorporation of Sb in GaAs1Â¿xSbx (x<0.15) by molecular beam epitaxy

146

Incorporation of secondary payloads onto the Green Propellant Infusion Mission (GPIM)

147

Incorporation of security and fault tolerance mechanisms into real-time component-based distributed computing systems

148

Incorporation of Security Mechanisms into the TMO Scheme for Real Time Distributed Computing

149

Incorporation of signal store into classifier systems: principle and experiments

150

Incorporation of sparse priors in long-code blind multiuser detection for DS-CDMA communication

151

Incorporation of spatial constraints into spectral mixture analysis of remotely sensed hyperspectral data

152

Incorporation of square patch and SRR metamaterials for dual-band printed antenna

153

Incorporation of stabilizer to rapid-quenched and transformed Nb/sub 3/Al multifilamentary superconductors

154

Incorporation of State-Level Variable Stime-Varying Property into the HMM

155

Incorporation of static phase shifter in power systems using variable structure and state feedback control

156

Incorporation of Static Singularities into the Finite Difference Time Domain Technique with Application to Microstrip Structures

157

Incorporation of Statistical Information for Polynomial and Transcendental Interpolation

158

Incorporation of statistical methods in multi-step neural network prediction models

159

Incorporation of stereoscopic video into an image-guided neurosurgery environment

160

Incorporation of strain into a two-dimensional model of quantum-well semiconductor lasers

161

Incorporation of supply voltage and process variations in the power optimization for future transistors

162

Incorporation of SVCs into energy function methods

163

Incorporation of Switching Operations in Power System Corrective Control Computations

164

Incorporation of Switching Operations in Power System Corrective Control Computations

165

Incorporation of system inertia into reliability evaluation of real-time control systems

166

Incorporation of system resolution compensation (RC) in the ordered-subset transmission (OSTR) algorithm for transmission imaging in SPECT

167

Incorporation of technology based aids for teaching engineering ethics

168

Incorporation of Telehealth Resources in Belo Horizonte´s SAMU: Qualifying and Improving Care

169

Incorporation of temporal masking effects into bark spectral distortion measure

170

Incorporation of terminal constraints in the FDTD analysis of transmission lines

171

Incorporation of Texture Information for Joint Spatio-Temporal Probabilistic Video Object Segmentation

172

Incorporation of thallium in InTlAs and GaTlAs grown by molecular beam epitaxy

173

Incorporation of the ASR output in speaker segmentation and clustering within the task of speaker diarization of broadcast streams

174

Incorporation of the early effect in the Ebers-Moll model

175

Incorporation of the field singularity behaviors at edges into the finite-difference solution of waveguide modes

176

Incorporation of the Universal Communications Identifier (UCI) to NGN

177

Incorporation of thermal expansion in static force modeling of Pneumatic Artificial Muscles

178

Incorporation of time delayed measurements in a discrete-time Kalman filter

179

Incorporation of time varying AR modeling in speech recognition system based on dynamic programming

180

Incorporation of time-of-flight information in PET list-mode reconstruction using a projector with accurate detector PSF modeling

181

Incorporation of time-varying LP cepstral features in HMM-based isolated word speech recognition

182

Incorporation of TiO2 nanoparticles in PVC/ENR blends

183

Incorporation of UMTS Future Capabilities for MUOS Evolution

184

Incorporation of uncertain intent information in conflict detection and resolution

185

Incorporation of Uncertainty into Level 2 Fusion Association Metrics

186

Incorporation of unified power flow controller model for optimal placement using particle swam optimization technique

187

Incorporation of unstructured uncertainty into the horowitz design method

188

Incorporation of uplink channel state information into an end-to-end coded satellite communication system

189

Incorporation of usability evaluation methods in agile software model

190

Incorporation of user behavioral patterns in the management of quality - of - service (qos) for future mobile networks

191

Incorporation of variable-capacitance diode elements in microwave devices

192

Incorporation of voltage stability operating limits in composite system adequacy assessment: BC Hydro´s experience

193

Incorporation of VSC transmission in power-flow simulation

194

Incorporation of weather effects in transmission system models for composite system adequacy evaluation

195

Incorporation of wind energy conversion systems in conventional generating capacity adequacy assessment

196

Incorporation of wind power in the east Danish power system

197

Incorporation of Windows Live Social Network into Elementary School Instruction

198

Incorporation of Zeland´s IE3D in the microwave and RF classroom

199

Incorporation of Zinc on MOCVD Growth of Ga_0.5In_0.5P and GaAs

200

Incorporation on the job-market: From theory to praxis

201

Incorporation technology of fullerene and conductive properties of fullerite in ion tracks of polymer film

202

Incorporation web in secondary education in Galicia

203

Incorporation, characterization, and conversion of negative rules into fuzzy inference systems

204

Incorporation/extraction of carbon and boron during semi-insulating LEC GaAs growth: roles of hydrogen and carbon monoxide in the puller atmosphere

205

Incorporaton Of Image Analysis And Gis Data Integration Techniques Into A Mineral Exploration Program In Eastern Nova Scotia

206

Incorporting Keyword-Based Filtering to Document Classification for Email Spamming

207

Incorrect addresses

208

Incorrect Addresses

209

Incorrect addresses

210

Incorrect Addresses

211

Incorrect Addresses

212

Incorrect Addresses

213

Incorrect Addresses

214

Incorrect Addresses

215

Incorrect Addresses

216

Incorrect Addresses

217

Incorrect attribute value detection for traffic accident data

218

Incorrect stability criteria for non-foster circuits

219

Incorrect systems: It´s not the problem, It´s the solution

220

Incorrect title

221

Incorrect use of fuse characteristics in IEC 62271-105 restricts H.V. fuse application in ring main units

222

Incorrigible set distributions and unsuccessful decoding probability of linear codes

223

Incorruptible system self-cleansing for intrusion tolerance

224

INCOS 2010 Committees

225

INCoS 2011 Committees

226

INCoS 2011 Reviewers List

227

INCoS 2013 Sponsors

228

INCoS 2013: Keynotes

229

INCoS 2013: Message from the Conference Chairs

230

INCoS 2013: Message from the Workshop Chairs

231

INCoS 2013: Organizing Committee

232

INCoS 2013: Reviewers

233

INCoS-2012 Keynote Talk

234

INCoS-2015 Organizing Committee

235

INCoS-2015 Tracks and Program Committee Members

236

Incoupling waveguide hologram with reduced polarization sensitivity

237

Inc-Part: Incremental Partitioning for Load Balancing in Large-Scale Behavioral Simulations

238

Increas in photostability and efficiency of generating water and ethanol solutions of laser dyes

239

Increase a bent crystal extraction efficiency by means of thin internal target

240

Increase a standalone GPS positioning accuracy by using a proximity sensor

241

Increase airline takeoff and landing sequences on present runways

242

Increase analysis in the total execution time of a parallel program

243

Increase and decrease in depolarization of Ka-band satellite beacon signal in thunderstorm events

244

Increase and stabilisation of pulse frequency of the laser with phototropic modulator with help synchronizing resonant influence on particles of modulating environment

245

Increase and Subjective Evaluation of Feedback Stability in Hearing Aids by a Binaural Coherence-Based Noise Reduction Scheme

246

Increase channel capacity in MIMO system by adjusting the axial ratio of circular polarized antenna

247

Increase competitive level by replacing steam turbines with electric adjustable speed drive system

248

Increase data rate in MB-OFDM uwb using hybrid digital modulation

249

Increase efficiency of solar photovoltaic system by data acquisition process

250

Increase Energy Efficiency of Data Center Cooling Facilities with Airflow Optimization

251

Increase fab capacity: With predictive short-interval scheduling

252

Increase fault tolerance in business processes utilizing platform capabilities

253

Increase flexibility and security in prepayment, through the use of a separate consumer interface

254

Increase ICT Project Success with Concrete Scope Management

255

Increase in barrier height of Al/n-GaAs contacts induced by high current

256

Increase in breakdown strength of PE film by additives of azocompounds

257

Increase in breakdown strength of PE film by additives of azocompounds

258

Increase in capacitance and tan δ between conductors on printed circuit board at low frequency due to ionic migration

259

Increase in capacity of multiuser OFDM system using dynamic subchannel allocation

260

Increase in computing capability and its influence on service provision

261

Increase in current density at 25-nm-wide emitter for InP hot-electron transistors without base layer

262

Increase in data capacity utilising dimensions of wavelength, space, time, polarisation and multilevel modulation using a single laser

263

Increase in delay uncertainty by performance optimization

264

Increase in efficiency and material yield by use of PECVD silicon nitride in a simple screen printing process on Solarex material [solar cells]

265

Increase in efficiency of operation of ultrasonic processing devices (based on welding of thin sheets)

266

Increase in efficiency of processes through optimization of ultrasonic vibrating system consisting of half-wave modules of variable cross-section

267

Increase in electrical system reliability and reduction in maintenance cost through improved design engineering

268

Increase in electromigration resistance by enhancing backflow effect

269

Increase in EM resistance by planarizing dielectric film over Al wirings

270

Increase in EMI of module connectors due to the presence of intervening geometry

271

Increase in emission current after high-frequency low-voltage pulse application observed for nano-pillar cathode

272

Increase in gain on TEA-CO2 laser device with supersonic flow

273

Increase in Grid-Connected PV System Power in Germany

274

Increase in input power and change of streamer length during rotation of electrode

275

Increase in laser repetition rate by spectral selection

276

Increase in laser RIN due to asymmetric nonlinear gain, fiber dispersion, and modulation

277

Increase in late sodium current and cellular uncoupling exacerbates transmural dispersion of repolarization in heart failure

278

Increase in luminous efficiency with thinned LED´s

279

Increase in mechanical strength by scalloping removal

280

Increase in membership subscriptions

281

Increase in minority carrier lifetime measured by microwave irradiation method

282

Increase in Modified Condition/Decision Coverage using program code transformer

283

Increase in motor output

284

Increase in multicast OFDM data rate in PLC network using adaptive LP-OFDM

285

Increase in mutations by exposure of mammalian cells to ELF magnetic fields

286

Increase in Numerical Magnitude from Left-to-Right Shortens Perceived Time

287

Increase in operating range and efficiency for variable gap axial flux motors

288

Increase in performance of a new or deployed system by cell site re-configuration

289

Increase in photoluminescence of Zn-doped p-type InP after hydrogenation

290

Increase in photosensitivity in silica-based optical waveguides on silicon

291

Increase in phytotoxicity of N-phosphonomethyl-glycine during ultrasonic atomization with ultralow doses of organic acids

292

Increase in Read Noise Margin of Single-Bit-Line SRAM Using Adiabatic Change of Word Line Voltage

293

Increase in regularity and decrease in variability seen in electroencephalography (EEG) signals from alert to fatigue during a driving simulated task

294

Increase in reliability of on-line testing methods using natural time redundancy

295

Increase in resistivity of indium-tin-oxide films spin-coated on titanium-dioxides

296

Increase in Reverse Operation Limit by Barrier Height Control of Diamond Schottky Barrier Diode

297

Increase in RF surface resistance of niobium as a result of acid treatment

298

Increase in semiconductor laser modulation response by FM to AM conversion in transmission through fiber grating

299

Increase in Servo Gain Reduces Jitter in High-Performance Numerical Control

300

Increase in specific absorption rate in human heads arising from implantations

301

Increase in surface-acoustic-wave velocity produced by ion implantation in quartz

302

Increase in sustaining voltage of gate-turnoff thyristors by an innovative floating gate structure

303

Increase in synchronization of respiration by repeatedly listening to the same piece of music

304

Increase in temperature on the surface of a large iron-based cabinet of a power converter due to generation of eddy current in the cabinet´s bus bars

305

Increase in The Capacity of a Cellular CDMA System with The Use of Directional Antennas

306

Increase in the competitiveness of SMEs using business intelligence in the Czech-Polish border areas

307

Increase in the Heavy-Ion Upset Cross Section of Floating Gate Cells Previously Exposed to TID

308

Increase in the luminescence efficiency of R·G·B LED via the controlling texture of AZO thin films

309

Increase in the random dopant induced threshold fluctuations and lowering in sub-100 nm MOSFETs due to quantum effects: a 3-D density-gradient simulation study

310

Increase in thermal stability of soft magnetic Fe-C/Ni-Fe multilayers with addition of Ta

311

Increase in thermal stability of soft magnetic Fe-C/Ni-Fe multilayers with addition of Ta

312

Increase in transient resistance of Bi2223 superconducting bulk by applying external magnetic field

313

Increase in Transmitted Data Rate for Adaptively Selected OFDM Signals over a Fading Channel

314

Increase in uptake of peptide modified gold nanoparticles (GNPs)

315

Increase in X-Ray Sensitivity of Cancer After Exposure to 434 MHz Electromagnetic Radiation

316

Increase of $Q$ -Factor of RF Magnetic Thin Film Inductor by Introducing Slit-Patterned Magnetic Thin Film and Multiline-Conductor Spiral Coil

317

Increase of ablation rate using burst mode femtosecond pulses

318

Increase of ablation rate using burst mode femtosecond pulses

319

Increase of accuracy and noise immunity for neutron gamma methods of borehole elemental analysis

320

Increase of accuracy for estimate of distributed irregularities in optical fibers

321

Increase of Ar⁺ ion density in argon RF magnetron discharges caused by the addition of a small amount of oxygen

322

Increase of Boron Precipitation in Nanostructured P-Type Silicon Germanium Thermoelectric Alloys

323

Increase of breakdown strength by morphological improvement at semicon interfaces in XLPE power cables and joints

324

Increase of Breakdown Voltage on AlGaN/GaN HEMTs by Employing Proton Implantation

325

Increase of capacity retention by laser structuring of thin film battery materials

326

Increase of Characteristic Impedance of Microstrip Line Using a simple Slot in Metallic Ground Plane

327

Increase of coercive force in sputtered hard disk

328

Increase of Coercivity and Composition Distribution in Fluoride-Diffused NdFeB Sintered Magnets Treated by Fluoride Solutions

329

Increase of coercivity and squareness ratio of by ferrite thin films by adding SiO₂ and substituting Al for Fe

330

Increase of convertor efficiency and suppression of parasitic bipolar by means of process optimization

331

Increase of Cooling Performance of Conduction Cooled Superconducting Coils Using High Thermal Conduction Plastic

332

Increase of Crosstalk Noise Due to Imbalanced Threshold Voltage Between nMOS and pMOS in Subthreshold Logic Circuits

333

Increase of crosstalk noise due to imbalanced threshold voltage between NMOS and PMOS in sub-threshold logic circuits

334

Increase of crosstalk penalty due to nonlinear propagation in optical networks

335

Increase of current carrying ability of vacuum interrupter

336

Increase of Current Limiting Capacity of SFCLs by Using Matrix-Type SFCL Module

337

Increase of data bit rate of optical chaotic multiplexing using external optical injection

338

Increase of digital CCTVs makes it difficult to analyze record images

339

Increase of earth dia causing climatic change

340

Increase of Effectiveness of a Measuring Control

341

Increase of Efficiency of Spatial Z-Indexing Algorithms

342

Increase of efficiency of suppression of reflecting from handicaps (interferences) such as "angel-echo" at the expense of use of multifrequency signals

343

Increase of Efficiency of The Power Supply System of a Trolleybus

344

Increase of electric power in factories and homes

345

Increase of energy efficiency of alumina production on the basis of process modeling

346

Increase of fatigue strength of 12Cr1МoV steel by surface nanostructuting with Zr⁺ ion beam

347

Increase of fault ride-through capability for the grid-connected wind farms

348

Increase of fundamental oscillation frequency in resonant tunneling diode with thin barrier and graded emitter structures

349

Increase of gate capacitance in DMOST

350

Increase of high-frequency (>150 hz) intracranial EEG activity during face perception in humans

351

Increase of image combination performance in combined vision systems using genetic algorithm

352

Increase of immunity of microcontroller to conducted continuous-wave interference by detection method

353

Increase of information by polarimetric remote sensing

354

Increase of inter-strand coupling losses in superconducting cable-in-conduit conductor under actual condition of sweep rate

355

Increase of inverse beta of Si transistors due to low-temperature treatments

356

Increase of Levitation Force due to Soft Ferromagnetic Plate and Bar in Magnetic Levitation System Using GdBCO Bulk

357

Increase of Levitation Properties on Magnetic Levitation System Using Magnetic Shielding Effect of GdBCO Bulk Superconductor

358

Increase of lifetime of electromagnetically actuated contactors by avoiding self-synchronization

359

Increase of Light Emission from the Positive Column of Argon/Mercury Discharges and from Wall Phosphor When the Wall Is Negatively Biased

360

Increase of maximum output-voltage in 3-phase buck PWM by discontinuous-switching-modulation

361

Increase of measurement accuracy of distances by laser rangefinder with adaptive threshold

362

Increase of measurement accuracy of frequency mistunings of resonant sensors [dielectric materials measurement applications]

363

Increase of membership

364

Increase of membership

365

Increase of nonradiative recombination centers in GaN-based laser diodes during aging

366

Increase of Operating Current of the LHD Helical Coils by Upgrading the Cooling System

367

Increase of output power from IGBTs in high power high frequency resonant load inverters

368

Increase of paper mill energy efficiency by optimization energy supply system industry

369

Increase of parasitic resistance in shallow p⁺ extension by SiN sidewall process and its improvement by Ge preamorphization for sub-0.25-μm pMOSFET´s

370

Increase of parasitic resistance of p-MOSFETs due to nitrogen atoms incorporation into silicon substrate by N/sub 2/O-oxynitride gate dielectrics process

371

Increase of parasitic resistance of shallow p+ extension with SiN sidewall process by hydrogen passivation of boron and its improvement by preamorphization for sub-0.25 /spl mu/m pMOSFETs

372

Increase of photosensitivity in Ge-doped fibers under strain

373

Increase of plasma opening switch conduction phase duration

374

Increase of Plasma Opening Switch conduction phase duration

375

Increase of PLC computability with neural network for recovery of faults in electrical distribution substation

376

Increase of positrons by a high-intensity two-bunch acceleration scheme at the KEKB linac

377

Increase of potential intellectual bandwidth in a scientific community through implementation of an end-user information system

378

Increase of power transmission capacity in multi-machine power systems with introduction of superconducting generator

379

Increase of profile grinding accuracy of high-precision nonrigid broaches on machines with CNC

380

Increase of QRS duration as a predictor of impending ventricular fibrillation during coronary artery occlusion

381

Increase of quality of an output voltage in rebuilding converter networks

382

Increase of quantity in a single liquid cell by agitation of the solution

383

Increase of refractive indices in liquid dielectrics by space charge accumulation

384

Increase of Reliability for Satellite Communication Circuits by Use of Long-Distancs Site Diversity

385

Increase of resistance to hot carriers in thin oxide MOSFETS

386

Increase of respiratory sinus arrhythmia after administration of diltiazem despite reduction of blood pressure

387

Increase of Reverse Link Capacity of the 3G CDMA Network by Mobile Transmit Diversity

388

Increase of safe work distance on EHV energized objects

389

Increase of separation efficiency in the inertial gas-purifying equipment by high-intensity ultrasonic vibrations

390

Increase of signal to noise ratio in wavelength conversion using four-wave mixing in semiconductor optical amplifiers

391

Increase of signal-to-noise ratio in fiber-optic systems with avalanche photodiode

392

Increase of sp3 content in a-C films with gas cluster ion beam bombardments; XPS and NEXAFS study

393

Increase of spatial resolution the compton tomograph Tom Scan-200 due to optimization of aperture function of disseminating volume

394

Increase of Static Electrification in Aged Transformers

395

Increase of switching field from a word line by design optimization

396

Increase of tape wound core losses due to interlamination short circuits and orthogonal flux components

397

Increase of the breakdown voltage of a pseudospark discharge by applying a blocking potential

398

Increase of the coverage range of the passive radar systems operated by signals from the telecommunication sources

399

Increase of the delivered energy probability in DES using a fuzzy probabilistic modeling

400

Increase of the delivered power probability in distribution networks using Pareto DC programming

401

Increase of the Dielectric Constant near a Magnetic Transition in La0.5Ca0.5MnO3

402

Increase of the Efficiency for a Solar Renewable Source Using a Soft Switched DC-DC Boost Converter

403

Increase of the Electrical Resistance of Thin Copper Film Due to 14 MeV Neutron Irradiation

404

Increase of the magnetic sensitivity of magnetically controlled MEMS switches

405

Increase of the minor field component in stress-induced birefringent fibers, due to nonuniformity of stress

406

Increase of the order of approximation and improvement of the interface conditions for the method of lines

407

Increase of the performance of a low ripple boost converter for PEM FC applications using GA and PSO algorithms

408

Increase of the Performance of Induction Motors

409

Increase of the Reliability of the Junction Terminations of Reverse-Conducting Insulated Gate Bipolar Transistor by Appropriate Backside Layout Design

410

Increase of the resistivity of electroless-deposited high-B_s CoNiFeB thin films

411

Increase of the Robustness of the junction terminations of power devices by a lateral variation of the Emitter Efficiency

412

Increase of the SBS threshold in a short highly nonlinear fiber by applying a temperature distribution

413

Increase of the Selectivity of Sensor Arrays Through Consumption Effects of Metal Oxide Sensors

414

Increase of the surface dose in kilovoltage X-ray therapy beams due to a thin layer of plastic wrap

415

Increase of the transmission in cut-off metallic hole arrays

416

Increase of the transverse strong head-tail stability threshold by an alternating chromaticity

417

Increase of the Two-Stage Orbotron Efficiency Due to Use of the Irregular Comb

418

Increase of time-and-frequency synchronization accuracy in communication systems with orthogonal subcarriers

419

Increase of transmission capacity by resource pooling in Argentina

420

Increase of Transmission Speed in Access Networks using 4-Ary Ask Directly Modulated Lasers

421

Increase of travel safety for public transport by mobile applications

422

Increase of TV images interframe processing effectiveness in wavelet-codecs for cellular communication systems

423

Increase of uniformity of temperature fields at the microwave heating in open chambers

424

Increase of UWB signals information capacity in radio networks

425

Increase of Virtual Image Area by Reflection of Mirrors

426

Increase of wear-resistance of 30CrMnSi2Ni steel by ultrasonic impact and ion-beam treatments

427

Increase on Siemens Reactor Throughput by Tailoring Temperature Profile of Polysilicon Rods

428

Increase on the resistivity of electrolessly deposited high B/sub s/ CoNiFeB thin films

429

Increase optical node output power using predistortion

430

Increase pedestrian safety by critical crossroads: lighting measurements and analysis

431

Increase performance of four-class classification for motor-imagery based brain-computer interface

432

Increase power transfer capability and controlling line power flow in power system installed the FACTS

433

Increase reliability for screening by coating plastic parts

434

Increase Reliability of Pervasive Oriented Component Platform via N-Version

435

Increase sensitivity of the sensor based on bipolar magnetotransistor by minimization initial output offset

436

Increase software trustability with self-testable classes in Java

437

Increase stability D-Pak package transistors to thermal loadings

438

Increase teachers´ presence and immediacy in slide videos

439

Increase the behavioral fault model accuracy using high-level synthesis information

440

Increase the capacity of a 12 kV/4.16 kV secondary selective substation at a large refinery, design, implementation and commissioning

441

Increase the capacity RSTE due to improvement of algorithm of work of a subsystem of the asynchronous equipment

442

Increase the concurrency for multi-core systems through collision array based workload assignment

443

Increase the End-to-end Throughput of a Cognitive Radio Chain by Considering the Primary Usage Pattern and Transmission Scheduling

444

Increase the hiding-bit capacity and strength for text watermarking with the line intersection on text image

445

Increase the number of stable equilibrium points in a Hopfield-type neural network

446

Increase the performance and enhancing Secure Authenticated Multipath Encrypted Protocol in MANET

447

Increase the photovoltaic conversion efficiency using Neuro-fuzzy control applied to MPPT

448

Increase the rate of utilization of Residential photovoltaic generation by EV charge-discharge control

449

Increase the signal-to-noise ratio of magnetic resonance imaging by a vertical coil array

450

Increase the thermal conductivity of high voltage electrical insulation systems

451

Increase the validity of positional-binary recognition of cyclic signals with application of radial-basis functional neural network

452

Increase the value of an internal communication team by embedding communication planning into a business unit´s strategic planning process

453

Increase throughput by expectation channel quality indicator

454

Increase transformer reliability and availbility: From condition assessment to site repair

455

Increase transmission system utilization in systems with variable generation through risk based assessment

456

Increase visibility for observation of micro objects in microassembly by an active imaging system

457

Increase your Knowledge at EMBS Summer Schools [Continuing Education]

458

IncrEase: A tool for incremental planning of rural fixed Broadband Wireless Access networks

459

Increased acceptance bandwidth for quasi-phasematched second harmonic generation in LiNbO₃ waveguides

460

Increased Accuracy for Resistance Measurements

461

Increased accuracy in large scale sewer flow mean velocity measurements using an array of ultrasonic velocity transducers

462

Increased accuracy of frequency difference measurements by microwave resonance sensors

463

Increased accuracy of motor vehicle position estimation by utilising map data: vehicle dynamics, and other information sources

464

Increased accuracy orientation estimation from omnidirectional images using the spherical Fourier transform

465

Increased Accuracy Stereo Approach for 3D Lane Detection

466

Increased accuracy through noise injection in abstract RTOS simulation

467

Increased acoustic and electromagnetic energy deposition in a layered tissue model

468

Increased adhesion on carbon nanofiber/polymer composite materials

469

Increased Aircraft Close-Support Mission Effectiveness Through Optimized Selection of Avionic Systems

470

Increased ambiguity resolution in digital radio frequency receivers

471

Increased amplifier efficiency by matching the area of the doped fiber region with the fundamental fiber mode

472

Increased amplifier spacing in soliton system with partial dispersion compensation

473

Increased area density in magnetic recording

474

Increased areal density using a 2-dimensional approach

475

Increased attenuation in optical fibres caused by diffusion of molecular hydrogen at room temperature

476

Increased Autonomous Behaviour in Embedded Devices with Micro-controller Integration

477

Increased availability and scalability for clustered services via the wait time calculation, trust based filtering and redirection of TCP connection requests

478

Increased avalanche breakdown voltage and controlled surface electric fields using a junction termination extension (JTE) technique

479

Increased Bandwidth Evanescent Open-Ended Waveguide Antenna Design Using the Imaginary Smith Chart

480

Increased Bandwidths and Mode Shapes of the Thickness-Extensional Trapped Energy Mode Transducer Array

481

Increased Battery Power Source Reliability for Remote Telephone Reserve and Uninterruptible Power Systems

482

Increased Bioactivity of Cranio-spinal Implants Functionalized with Hydroxyapatite Nanostructured Coatings: Morpho-structural Characterization and In-Vitro Evaluation

483

Increased Biomass and Adsorption of Used Diesel Oil by Thraustochytrids

484

Increased Bit Rate Direct Modulation AMO-OFDM Transmission by Optical Injection Using Monolithically Integrated Lasers

485

Increased breakdown voltage of oil impregnated direct current filter capacitor

486

Increased breakdown voltage of silicon-on-insulator Schottky diodes

487

Increased breakdown voltages in In_1-x-yGa_xAl _yAs/InAlAs FETs

488

Increased brightness in pumping schemes using diode bars

489

Increased cable ampacity using multiple coaxial conductors and inductive compensation

490

Increased Capacitance Density with Metal-Insulator-Metal - Metal Finger Capacitor (MIM-MFC)

491

Increased capacitance for VLF umbrella antennas using multiple-wire rib construction

492

Increased Capacity an Interconnections of the Columbia Gas and Electric Corporation

493

Increased capacity and interconnections of the Columbia gas and electric corporation

494

Increased capacity in an MS protection ring using WDM technique and OADM: the `coloured section´ ring

495

Increased capacity per unit-cost by oversampling

496

Increased capacity using CDMA for mobile satellite communication

497

Increased carrier lifetimes in epitaxial silicon layers on buried silicon nitride produced by ion implantation

498

Increased CDMA system capacity through adaptive cochannel interference regeneration and cancellation

499

Increased cell efficiency in InGaAs thin film solar cells with dielectric and metal back reflectors

500

Increased cell killing and DNA damage in cells exposed to ultra-short pulsed electric fields

501

Increased Cement Grinding Efficiency by Using High-Efficiency Separators

502

Increased channel edge impact ionization in SOI MOSFET´s and effects on device operation

503

Increased charge capacity in Hg1-xCdxTe MIS devices using a ramped gate voltage

504

Increased Chlorine Production and Power Efficiency by Incremental Changes--- A Case History

505

Increased classification accuracy and speedup through pair-wise feature selection for support vector machines

506

Increased CMOS IC stuck-at fault coverage with reduced I _DDQ test sets

507

Increased coherence time in microwave "echo" spectroscopy of cold atoms in an optical dipole trap

508

Increased complexities of frequency coordination due to telecommunications advances

509

Increased complexity of short-term heart rate variability in hyperthyroid patients during orthostatic challenge

510

Increased Connectivity at Lower Cost: The Case for Multi-Radio Nodes in Multi-Hop Wireless Networks

511

Increased Control and Data Acquisition Capabilities via Microprocessor-Based Timed Reading and Time Plot CAMAC Modules

512

Increased co-operation with filmless radiology department-results and experience with four years of development work in Mjolby Health Care Center, Sweden

513

Increased Crystal Unit Resistance at Oscillator Noise Levels

514

Increased current emission of the perforated cold cathode

515

Increased current gain and reduced emitter resistance in F-implanted, low thermal budget polysilicon emitters for SiGe HBTs

516

Increased Current Gain and Reduced Emitter Resistance in Sige HBTs by Fluorine Or Chlorine Implantation into a Polysilicon Emitter Contact

517

Increased current gain and suppression of peripheral base currents in silicide self-aligned narrow-width polysilicon-emitter transistors of an advanced BiCMOS technology

518

Increased Current Ratings for Step Regulators [includes discussion]

519

Increased cut-off wavelength with decreasing hole size in a metal

520

Increased cycle time achieved by fractional derivatives in the adaptive control of the Brusselator model

521

Increased damage to stones without increased damage to cells with a dual-reflector lithotripter

522

Increased data quality in home blood pressure monitoring through context awareness

523

Increased Deep-Level Hole Trapping by Combined Negative-Bias Temperature and Channel Hot-Hole Stress

524

Increased degradation of half-micron PMOSFETs due to swapped pulse stressing

525

Increased depth-of-field with numerically optimized general phase masks

526

Increased detection efficiencies of nanowire single-photon detectors by integration of an optical cavity and anti-reflection coating

527

Increased detectivity and operation temperature in photonic crystal slab quantum well photodetectors

528

Increased dielectric quality factor in planar resonators by selective dielectric removal

529

Increased discrete information rates at specified integrity

530

Increased discrimination in level set methods with embedded conditional random fields

531

Increased dispersion of ventricular repolarization during recovery from exercise

532

Increased drain saturation current in ultra-thin silicon-on-insulator (SOI) MOS transistors

533

Increased dynamic range for microwave photonic links

534

Increased dynamic range for RFID EM-field measurements

535

Increased dynamic range multi-rate waveform for mobile satellite communications: Adaptive Coding Spreading and Modulation (ACSM)

536

Increased dynamics adaptor to incorporate energy sources in PV-based DC microgrids

537

Increased efficiency and faster turn-on in magnetrons using the transparent cathode

538

Increased efficiency BLDC motor with soft magnetic material

539

Increased efficiency for klystron amplifiers

540

Increased efficiency for setting insulation grids for water treatment by pulsed power discharge in air spraying water droplets

541

Increased efficiency in customer involvement in configuration processes — The SWOP approach

542

Increased efficiency in QAM power amplifiers

543

Increased efficiency of high-beam quality extraction from a copper vapor laser with H/sub 2/-Ne admixtures

544

Increased Efficiency Of Hip Joint Surgery Using Cad/cam Applications

545

Increased efficiency of integral equation solutions of antennas by incorporation of network principles part II

546

Increased Efficiency of Neighborhood Storage

547

Increased Efficiency of Silicon Light-Emitting Device in Standard Si-CMOS Technology

548

Increased Efficiency of Surface Wave Stimulation on the Inaccessible Side of a Thick Isotropic Plate with Superimposed Periodicity

549

Increased efficiency of wind generated electricity using demand side management

550

Increased Efficiency Versus Increased Reliability

551

Increased efficiency with surface texturing in ITO/InP solar cells

552

Increased effort affects performance in a joint pick-and-place task

553

Increased EMI immunity in CMOS operational amplifiers using an integrated common-mode cancellation circuit

554

Increased emission current from MIM cathodes through the use of a multilayer top electrode

555

Increased emission efficiency of gated cold cathode with carbonic nano-pillars

556

Increased energy absorption in ZnO arrester elements through control of electrode edge margin

557

Increased energy delivery for parallel battery packs with no regulated bus

558

Increased energy efficiency and reliability of ultra-low power arithmetic

559

Increased Energy Efficiency in a Swedish Iron Foundry Through Use of Discrete Event Simulation

560

Increased energy in stable dry-band arcs due to length compression

561

Increased energy production of First Solar horizontal single-axis tracking PV systems without backtracking

562

Increased energy-efficiency and capacity for mixed-line-rate WDM networks with hybrid Raman-EDFA amplification

563

Increased Etch Chamber Productivity through the Reduction of Unscheduled Wet Cleans

564

Increased export of grounded ice after the collapse of northern Larsen ice shelf, Antarctic Peninsula, observed by Envisat ASAR

565

Increased Fab Efficiency through the use of Small Lot Size FOUPs

566

Increased fairness in cellular networks through baste station cooperation

567

Increased feedback due to package mounting

568

Increased Ferrimagnetic Echo Bandwidth Using Field Gradient Synthesis

569

Increased field emission correlated with thermal conditioning of carbon nanosheets

570

Increased field of view via nonlinear digital holography

571

Increased field sensitivity in Co/Cu multilayers with soft adjacent layers

572

Increased Field Sensitivity in Co/cu Multilayers with Soft Adjacent Layers

573

Increased Flame Reactivity of a Lean Premixed Flame Through the Use of a Custom-Built High-Voltage Pulsed Plasma Source

574

Increased flexibility in inter picture partitioning

575

Increased float voltage and the effects of negative self-discharge on flooded lead calcium telecommunications cells

576

Increased forest service

577

Increased FPGA capacity enables scalable, flexible CCMs: an example from image processing

578

Increased frame rate for linear array imaging using novel frequency modulation scheme

579

Increased frame rate for plane wave imaging without loss of image quality

580

Increased frequency capability for a given active filter configuration

581

Increased frequency resolution of active rectifiers using fractional digital PWM

582

Increased Front Surface Recombination by Rear-Side Laser Processing on Thin Silicon Solar Cells

583

Increased fuel efficiency in ship LVDC power distribution systems

584

Increased functionality trends in solid state motor controller technology

585

Increased generalization through selective decay in a constructive cascade network

586

Increased Group-Delay Slope Loop System for Enhanced-Resolution Analog Signal Processing

587

Increased handover performance in 2G and 3G wireless systems based on combined mobile-location and area

588

Increased heart rate reduced crossbridge formation in beating rat whole heart

589

Increased histamine by thioperamide exerts its neuronal protection effect through postsynaptic H1 receptor in neonatal hypoxic-ischemic encephalopathy rat model

590

Increased hold-off voltage in vacuum gaps with coated electrodes

591

Increased hot-carrier degradation of NMOSFETs under very fast transient stressing

592

Increased hot-carrier effects using SiGe layers in vertical surrounding-gate MOSFETs

593

Increased hydrostatic pressure enhances motility of lung cancer cells

594

Increased importance of VHF radars in ground-based air defense

595

Increased Industry/University Interactions -- A Solution for Today´s Power Engineering Education Problem

596

Increased Industry/University Interactions???A Solution for Today´s Power Engineering Education Problem

597

Increased information flow needs for high-assurance composite evaluations

598

Increased information rate by oversampling

599

Increased input power dynamic range of Mach-Zehnder wavelength converter using a semiconductor optical amplifier power equaliser with 8 dBm output saturation power

600

Increased instability of heartbeat dynamics in Parkinson´s disease

601

Increased Integrity For Scada Systems Using PCs

602

Increased Intensity Heavy Ion Beams at ORIC with Cryopumping

603

Increased Intensity Performance of the Brookhaven AGS

604

Increased interference-limited MIMO capacity with parasitic reconfigurable aperture antennas

605

Increased interoperability: Evolution of 6LoWPAN-based web application

606

Increased ion source life for Varian´s kestrel implanter

607

Increased IP layer protection bandwidth due to router bypass

608

Increased jitter sensitivity in continuous- and discrete-time ΣΔ modulators due to finite opamp settling speed

609

Increased junction breakdown voltages in silicon-on-insulator diodes

610

Increased laser damage threshold in As2S3 motheye antireflective structures

611

Increased laser tunability by acidification of organic dyes

612

Increased learning rates through the sharing of experiences of multiple autonomous mobile robot agents

613

Increased Levitation Force in Magnetic Levitation System Using Magnetic Shielding Effect of HTS Bulk

614

Increased lifetime of aluminum-free LEDs on Si substrates grown by MOCVD

615

Increased lifetime of wire bonding connections for IGBT power modules

616

Increased light emission by geometrical changes in Si LEDs

617

Increased light extraction from a light-emitting diode using a two-dimensional photonic crystal

618

Increased light extraction from a light-emitting diode using a two-dimensional photonic crystal

619

Increased Light Extraction From GaN Light-Emitting Diodes by ${\\rm SiN}_{{\\rm x}}$ Compound Eyes

620

Increased Light Extraction From Inorganic Scintillators With Laser-Etched Microstructures

621

Increased Light Extraction From Vertical GaN Light-Emitting Diodes With Ordered, Cone-Shaped Deep-Pillar Nanostructures

622

Increased light output from color picture tubes through optical analogy

623

increased light output from color picture tubes through optical analogy

624

Increased linear dynamic range by low biasing the Mach-Zehnder modulator

625

Increased local density of states and electromagnetic well effect by using very thin hyperbolic metamaterial

626

Increased locomotive performance using condition based maintenance

627

Increased Logic Functionality of Clocked Series-Connected RTDS

628

Increased losses in a D-C motor when operated from grid-controlled rectifiers

629

Increased Low-grade Heat Source Power Generation Capacity with Ejector

630

Increased magnetic damping of permalloy upon Cr implantation

631

Increased magnetic moment induced by lattice expansion from α-Fe to α-Fe8N

632

Increased Mars Rover Autonomy using AI Planning, Scheduling and Execution

633

Increased maximum count rates in single-photon avalanche diodes with ultrafast active quenching

634

Increased mc-Si Module Efficiency Using Fluorescent Organic Dyes: A Ray-Tracing Study

635

Increased memory performance during vector accesses through the use of linear address transformations

636

Increased mfcc filter bandwidth for noise-robust phoneme recognition

637

Increased mitochondrial benzodiazepine receptors in inflamed lungs detected using multiple indicator dilution

638

Increased Modal Overlap for Improved Sensitivity in a Monolithic Intracavity Chemical Sensor

639

Increased modulation bandwidth up to 20 GHz of a detuned-loaded DBR laser

640

Increased monomolecular recombination in MOCVD grown 1.3-μm InGaAsN-GaAsP-GaAs QW lasers from carrier lifetime measurements

641

Increased Multilayer Fabrication and RF Characterization of a High-Density Stacked MIM Capacitor Based on Selective Etching

642

Increased noise immunity in large vocabulary speech recognition with the aid of spectral subtraction

643

Increased Nonlinear Crosstalk in Analog Wavelength-Division-Multiplexed Links Due to the Chromatic Dispersion of Optical Filters

644

Increased Number of Voltage Steps for Cascaded H-bridge Multilevel Inverters using 3-level Operation in each Half-cycle

645

Increased numbers of bonds stabilize adhesion with multiple tethers between endothelium and monocytes

646

Increased offshore MODU mooring performance through MODUline® polyester rope

647

Increased operating flexibility for superconducting magnetic energy storage systems through the use of self-commutation

648

Increased operating temperature range in La-modified Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃ relaxor ferroelectric-based transducers

649

Increased operational range for implantable UHF RFID antennas

650

Increased OPF code development efficiency by integration of general purpose optimization and derivative computation tools

651

Increased OPF code development efficiency by integration of general purpose optimization and derivative computation tools

652

Increased optical intensity near high order Degenerate Photonic Band Edges for nonlinear applications

653

Increased optical saturation intensities in GaInAs multiple quantum wells by the use of AlGaInAs barriers

654

Increased oscillatory activity as evidenced by a cumulative dose of alcohol

655

Increased OSNR gains of forward-error correction in nonlinear optical transmissions

656

Increased output power 300 GHz oscillator based on linear superposition

657

Increased penetration of sustainable energy sources into the grid: Instruments and effects

658

Increased penetration of wind generated electricity using real time pricing & demand side management

659

Increased Performace of FPGA-Based Color Classification System

660

Increased performance in genetic manipulation by modeling the dielectric properties of the rodent brain

661

Increased Performance of Battery Packs by Active Equalization

662

Increased performance of IPv6 packet transmission over ethernet

663

Increased performance with neural nets - an example from the marketing domain

664

Increased periodic magnetic fields for traveling wave tubes

665

Increased periodic magnetic fields for travelling wave tubes

666

Increased Perpendicular TMR in FeCoB/MgO/FeCoB Magnetic Tunnel Junctions by Seedlayer Modifications

667

Increased Phase Synchronization between Intracranial Pressure and Arterial Blood Pressure during Elevated Intracranial Pressure in Dogs

668

Increased phase-matching bandwidth in GRENOUILLE measurements

669

Increased photogeneration in thin silicon concentrator solar cells

670

Increased photon absorption and conversion in ternary bulk heterojunction systems of CdSe/CdS core-shell nanoparticles/methyl viologen composites, conjugated polymers, and fullerenes

671

Increased photosensitivity of Ge-doped and Ge, Sn-doped fibres under high-intensity 264 nm laser light

672

Increased piezoelectric coupling factor in temperature-compensated film bulk acoustic resonators

673

Increased piezoelectric d33-coefficients of ferroelectrets with high external DC-voltages

674

Increased polarization-entangled photon flux via thinner crystals

675

Increased power capability of standard drive inverters by sequential switching

676

Increased power delivery from the DIII-D neutral beam injection system

677

Increased power density of permanent magnet synchronous machines by use of concentrated bar windings

678

Increased power injection in multimode optical-fiber buses through mode-selective coupling

679

Increased power operation of GaAs/AlGaAs waveguide p-i-n photodiodes with non-absorbing input facets, fabricated by quantum well intermixing

680

Increased power output of the 6328 Å gas maser

681

Increased power supply for Northern Illinois

682

Increased power transfer efficiency in all-optical bus network using asymmetric monomode/multimode c

683

Increased precision digital filter coefficients using digital dither

684

Increased prices for subscriptions to bimonthly publications and transactions

685

Increased production of rare earths

686

Increased productivity by workshop practice

687

Increased productivity from men and machines in batch production

688

Increased productivity with AC drives for mining excavators and haul trucks

689

Increased profits from a new technique of method improvement

690

Increased proliferation of primary chondrocyte cells by nanostructure and cycling mechanical stimulation on PDMS cell chip

691

Increased pulsed amplifier efficiency by manipulating the fiber dopant distribution

692

Increased QRS complex dispersion in postinfarction patients: is it clinically important?

693

Increased QT variability in patients with hypertrophic cardiomyopathy

694

Increased QT variability index as a marker for a cardiac autonomic dysregulation in schizophrenia

695

Increased quadratic electro-optic effect in GaAs/AlGaAs square quantum wells

696

Increased quantum efficiency and reduced red-shift in polymer nanoparticle luminophors

697

Increased radiant exposures during cutaneous laser therapy: a mathematical model based on histology

698

Increased radiated emission and impedance change by edge placement of high-speed differential lines on printed circuit board

699

Increased radiation absorption in thermophotovoltaic quantum cascade structures

700

Increased radiation hardness in ultra-thin GaAs single-junction solar cells

701

Increased radiation hardness of CdZnTe by laser radiation

702

Increased radiation resistance in human osteosarcoma cells transformed by EJras oncogene

703

Increased radiation resistance of thin 4J-IMM solar cells by recycling transparency photon losses

704

Increased Range Bistatic Scatter Radio

705

Increased range of motion and decreased muscle activity during maximal reach with gravity compensation in stroke patients

706

Increased ranging capacity using Ultrawideband direct-path pulse signal strength with dynamic recalibration

707

Increased Rate of Multiple-Bit Upset From Neutrons at Large Angles of Incidence

708

Increased rate of rise of voltage on high power cathode pulsed crossed field devices

709

Increased rate of rise of voltage on high-power cathode pulsed crossed-field devices

710

Increased ratings of overhead transmission circuits using HTLS and compact designs

711

Increased received power and decreased modal noise by preferential excitation of low-order modes in multimode optical-fiber transmission systems

712

Increased recuperation efficiency by increment of the recuperation voltage to 1950V in a 1500V DC catenary system

713

Increased reflex contributions to dynamic ankle stiffness in spastic spinal cord injured patients

714

Increased Reliability and Better Quality Control through Mechanized Assembly and Test

715

Increased reliability by effective use of sensor information: a shop floor application of sensor-aided robotic handling

716

Increased reliability of AlGaN/GaN HEMTs versus temperature using deuterium

717

Increased reliability of a-Si TFT´s deposited on clear plastic substrates at high temperatures

718

Increased reliability of communication systems in sub-threshold region implementations with pulsed-latch registers

719

Increased reliability or reduced delay in wireless industrial networks using relaying and Luby codes

720

Increased Reliability with SSPiRAL Data Layouts

721

Increased repolarization heterogeneity is associated with increased mortality in hemodialysis patients

722

Increased resistance in p-type poly-Si resistors by thermal anneal reduction interface charge

723

Increased resistance of crystal units at oscillator noise levels

724

Increased resistance of rough copper surfaces at terahertz frequencies

725

Increased resistance to oxidative stress in human osteosarcoma cells transformed by EJras oncogene

726

Increased Resistive Losses of Copper Interconnects in ULSI Devices—A Reliability Issue

727

Increased Resolution 3D Face Modeling and Recognition From Multiple Low Resolution Structure From Motion Models

728

Increased resolution ECE imaging of temperature profiles/fluctuations in tokamak plasmas

729

Increased Resolution Macular Thickness Mapping by OCT

730

Increased resolution using adaptive arrays

731

Increased responsivity of photo-EMF detectors using asymmetric interdigitated contacts

732

Increased Retention of Early Computer Science and Software Engineering Students Using Pair Programming

733

Increased risk for falling associated with obesity: mathematical modeling of postural control

734

Increased Robustness Against Bit Errors for Distributed Speech Recognition in Wireless Environments

735

Increased Robustness and Security of Digital Watermarking Using DS-CDMA

736

Increased robustness in visual processing with SOM-based filtering

737

Increased robustness of humanoid standing balance in the sagittal plane through adaptive joint torque reduction

738

Increased robustness with interface based permutation routing

739

Increased roles of linear algebra in control education

740

Increased roles of linear algebra in control education

741

Increased safety for manual tasks in the field of nuclear science using the technology of augmented reality

742

Increased safety type `e´ explosion protection of electrical termination apparatus

743

Increased sample entropy in atrial fibrillation relates to cardiac autonomic dysfunction determined by heart rate variability: A preliminary study

744

Increased sampling rate with Hilbert transformation for AWG phase error measurement in frequency domain

745

Increased scalability and power efficiency by using multiple speed pipelines

746

Increased Sectorization: Horizontal or Vertical?

747

Increased security level using space-division approach in wireless computing network

748

Increased selectivity in continuous axial HGMS separators

749

Increased selectivity of clinical peripheral nerve interfaces

750

Increased sensitivity and parametric discrimination using higher order modes of etched-core fiber Bragg grating sensors

751

Increased sensitivity in FMRI group analysis using mixed-effect modeling

752

Increased sensitivity in the electro-optic detection of focused terahertz pulses

753

Increased Sensitivity in the Noninvasive Acoustic Emission Technique for Bone Fracture Diagnosis

754

Increased sensitivity of capacitive couplers for in-service PD measurement in rotating machines

755

Increased sensitivity of direct-detection microwave receivers for compatibility measurements

756

Increased sensitivity through use of overlapping 180° orbits in clinical myocardial perfusion imaging

757

Increased sensivity of tracking of portable devices based on biological organisms

758

Increased shoulder abduction loads decreases volitional finger extension in individuals with chronic stroke: Preliminary findings

759

Increased Si FEA Emission Current and Correlated Changes in A and B at Elevated Temperature

760

Increased signal-to-noise ratio of sensorless control using current oversampling

761

Increased Single-Event Transient Pulsewidths in a 90-nm Bulk CMOS Technology Operating at Elevated Temperatures

762

Increased slide rule accuracy for numbers near unity

763

Increased slide-rule accuracy for numbers near unity. II

764

Increased software reliability through input validation analysis and testing

765

Increased spatial resolution in transillumination using collimated light

766

Increased Spectrum Access Opportunities for Secondary Users Exploiting Adaptive Modulation in Primary Links

767

Increased speed of semiconductor optical amplifier wavelength converter at multiple channels using Fabry-Perot and microelectromechanical filters

768

Increased Speed: 3D Silicon Sensors; Fast Current Amplifiers

769

Increased spurious-free dynamic range for an all-Raman 105 km link using phase modulation and balanced detection

770

Increased static R_ON in GaN-on-silicon power transistors under high-side operation with floating substrate conditions

771

Increased Superconductivity for CNT Doped ${\\hbox {MgB}}_{2}$ Sintered in 5T Pulsed Magnetic Field

772

Increased surface ordering of InAs island arrays using a multidot column subsurface structure

773

Increased surface resistance of rough copper surfaces in the terahertz regime

774

Increased surge voltages caused by EMC chokes

775

Increased Susceptibility of Arterial Tissue to Wire Perforation With the Application of High-Frequency Mechanical Vibrations

776

Increased swimming control with evolved lamprey CPG controllers

777

Increased swing convertor for low-internal-voltage ULSI circuits

778

Increased system gain 49-QPRS digital microwave design concept

779

Increased System Worth Through Reliability Design Review

780

Increased terahertz emission from SI-GaAs deposited with sub-wavelength spacing metal line array

781

Increased thermal conductivity polycrystalline diamond for low-dissipation micromechanical resonators

782

Increased thermoelectric system thermodynamic efficiency by use of convective heat transport

783

Increased thin film wiring density by stacked vias

784

Increased threshold for the first-order lateral mode lasing in low-ridge waveguide high power QW lasers

785

Increased throughput for process chromatography using constrained deconvolution

786

Increased throughput for process chromatography using constrained deconvolution

787

Increased throughput for the testing and repair of RAMs with redundancy

788

Increased throughput Using lossy material slabs in a stacked microstrip connector for 10Gbps baseband signaling

789

Increased throughput using optical PPM-CDMA

790

Increased THz emitter efficiency by coherent superposition in a high repetition rate resonator

791

Increased time-constant dual-input integrators

792

Increased tissue nitric oxide (NO) and cortical blood flow during functional activation of rat brain

793

Increased transmission capacity by forced symmetrization

794

Increased transmission capacity by forced symmetrization

795

Increased tuning range of Pb1-xSnxSe diode lasers using small magnetic fields

796

Increased ultraviolet reflectivity of magnetron deposited Al films

797

Increased UMTS system performance via multicarrier chip shaping and frequency-domain reception

798

Increased uncertainty a new challenge for power system planners

799

Increased Upconversion Response in a-Si:H Solar Cells With Broad-Band Light

800

Increased uplink capacity for TDMA systems through joint detection with diversity arrays

801

Increased usability through user interface modification of development and education tools for embedded systems

802

Increased utilization of bio-oil after extraction and separation of carboxylic acid

803

Increased variability in respiratory parameters heralds obstructive events in children with sleep disordered breathing

804

Increased Visibility of Targets Submerged in Scattering Opaque Media and Polarimetric Techniques

805

Increased Voltages for Synchronous Machines

806

Increased wafer yield in silicon ingots by the application of high purity silicon nitride-coating and high purity crucibles

807

Increased Wind Revenue and System Security by Trading Wind Power in Energy and Regulation Reserve Markets

808

Increased-area oxidised single-fundamental mode VCSEL with self-aligned shallow etched surface relief

809

Increased-bandwidth resonant slot array with bidirectional radiation pattern

810

Increased-bandwidth, meandering vibration energy harvester

811

Increased-directivity slot antennas

812

Increase-decrease congestion control for real-time streaming: scalability

813

Increases in energy conversion efficiency for thin-film polycrystalline CdS/Cu2S photovoltaic cells

814

Increases in overground gait speed with body weight support in people post-stroke

815

Increases of reliability of rectifiers

816

Increasing 11th grader´s interest in STEM majors via a NAE Grand Challenge: Securing cyberspace-themed project

817

Increasing a postprocessor in intrusion detection systems to use in switches

818

Increasing a pulse repetition rate of laser with pumping environment passive Q-modulation

819

Increasing Acceptability of Decision Trees with Domain Attributes Partial Orders

820

Increasing acceptable number of signals in subcarrier multiple access optical networks in the presence of high optical beat interference

821

Increasing access to engineering

822

Increasing access to universities

823

Increasing access with a low-cost robotic wheelchair

824

Increasing accessibility to medical robotics education

825

Increasing Accuracy in Image-Guided Robotic Surgery Through Tip Tracking and Model-Based Flexion Correction

826

Increasing accuracy of finite difference methods in nonorthogonal irregular grids

827

Increasing accuracy of frequency estimation by decimation

828

Increasing accuracy of Kalman filter-based sensorless control of wind turbine PM synchronous generator

829

Increasing accuracy of measurement of amplitudes difference of low-frequency harmonious signals

830

Increasing accuracy of winding insulation state indicator of three phase inverter-fed machines using two current sensors only

831

Increasing AC-field frequency in microwave-assisted magnetic recording

832

Increasing actionability of in-house corporate prediction markets

833

Increasing Additive Noise Removal in Speech Processing Using Spectral Subtraction

834

Increasing Advertising Value of Mobile Marketing - An Empirical Study of Antecedents

835

Increasing agent physicality to raise social presence and elicit realistic behavior

836

Increasing agility in engineering and runtime of automated manufacturing systems

837

Increasing air traffic effectiveness: the potential for a self-organizing system

838

Increasing airport arrival capacity in NextGen with wake turbulence avoidance

839

Increasing airport efficiency: injecting new technology

840

Increasing airport security with the development of high accuracy location algorithms based on ray-tracing techniques over WLAN networks

841

Increasing allocated tasks with a time minimization algorithm for a search and rescue scenario

842

Increasing alumni engagement through the capstone experience

843

Increasing ampacity of cables by an application of ventilated pipes

844

Increasing analog programmability in SoCs

845

Increasing and broadening undergraduate participation in IT — A new approach

846

Increasing and detecting memory address congruence

847

Increasing angular resolution by extrapolating signals

848

Increasing anomaly handling efficiency in large organizations using applied machine learning

849

Increasing application accessibility through Java

850

Increasing application performance in virtual environments through run-time inference and adaptation

851

Increasing assessment effectiveness in a time of decreasing budgets

852

Increasing assurance with literate programming techniques

853

Increasing attack resiliency of wireless ad hoc and sensor networks

854

Increasing attacker workload with virtual machines

855

Increasing Aural Skills of International Graduate Students

856

Increasing aural skills of international graduate students

857

Increasing Automation in the Backporting of Linux Drivers Using Coccinelle

858

Increasing Automation in the Special Telephone Services in West Germany

859

Increasing autonomous fault-tolerant FPGA-based systems´ lifetime

860

Increasing autonomy of UAVs

861

Increasing Autonomy Transparency through capability communication in multiple heterogeneous UAV management

862

Increasing autonomy within underwater intervention scenarios: The user interface approach

863

Increasing availability and security of an authentication service

864

Increasing Availability and Survivability of Cluster Head in WSN

865

Increasing Availability by Sacrificing Data Integrity - A Problem Statement

866

Increasing availability of broadband access over copper network infrastructure

867

Increasing availability of GIS installations by using digital control, protection and monitoring systems

868

Increasing availability of production systems in robust layouts via assignment of maintenance resources

869

Increasing Availability of Workflows Executing in a Pervasive Environment

870

Increasing Awareness in Collaborative Authoring through Edit Profiling

871

Increasing Awareness in Collaborative Authoring through Edit Profiling

872

Increasing awareness in distributed software teams: A first evaluation

873

Increasing awareness of computer science in high school girls

874

Increasing awareness of residential energy consumption: Data analysis and presentation for ecoMOD, a sustainable housing initiative

875

Increasing B⁺ current from a microwave ion source by simultaneously utilizing new techniques

876

Increasing bandwidth density in future optical interconnects

877

Increasing Bandwidth Dual Frequency Triangular Microstrip Antenna Feed By Coplanar Waveguide

878

Increasing bandwidth in antenna applications By using chiral metamaterials

879

Increasing bandwidth of flambeau-shape monopole antenna for UWB application

880

Increasing bandwidth triangular microstrip antenna using parasitic patch

881

Increasing bandwidth utilization in next generation IPTV networks

882

Increasing beamsteering directions using polyphase decomposition

883

Increasing believability: agents that justify their actions

884

Increasing big data front end processing efficiency via locality sensitive Bloom filter for elderly healthcare

885

Increasing binding efficiency of ultrasound targeted agents with radiation force

886

Increasing biogas production of anaerobic fermentation with cellulase pretreatment on organic fraction of municipal solid waste

887

Increasing bondability and bonding strength of gold bmps thermosonic bonding to flex substrates by depositing a nickel layer

888

Increasing bonding strength of chips and substrates assembly by argon plasma

889

Increasing bone mineral density in immobilized children using a dynamic stander: Pilot study

890

Increasing Buffer-Locality for Multiple Relational Table Scans through Grouping and Throttling

891

Increasing cable rating by distributed fiber optic temperature monitoring and ampacity analysis

892

Increasing cache bandwidth using multiport caches for exploiting ILP in non-numerical code

893

Increasing cache capacity via critical-words-only cache

894

Increasing Cache Port Efficiency for Dynamic Superscalar Microprocessors

895

Increasing camera dynamic range through in-sensor multi-exposure white balancing

896

Increasing Capabilities in Interactive Computer Graphics Terminals

897

Increasing Capacitance and Self-Resonant Frequency of the MEMS Switched Capacitor Using High- $\\kappa$ TiO₂ and SU-8 Bridged Beam Structure

898

Increasing capacity in a FEC coded DS-CDMA system over frequency-selective channels

899

Increasing capacity in massive MIMO cellular networks via small cells

900

Increasing capacity of blind mobile system using pre-filtering technique

901

Increasing capacity of multi-cell cooperative cellular networks with nested deployment

902

Increasing capacity or productivity with controller assistance tools in high complexity airspace

903

Increasing capacity or productivity with controller assistance tools in high complexity airspace

904

Increasing Capacity Through the Use of the Timing Channel in Power-Constrained Satellite Networks

905

Increasing CDMA capacity using multiple orthogonal spreading sequence sets and successive interference cancellation

906

Increasing cement grinding capacity with vertical roller mill technology

907

Increasing channel capacity and range on urban optical analog AM-VSB CATV systems

908

Increasing Channel Capacity of an Ultrawideband MIMO System Using Vector Antennas

909

Increasing channel capacity on MIMO system employing adaptive pattern/polarization reconfigurable antenna

910

Increasing Channel Margin of Distorted Serial Systems

911

Increasing channel occupancy in large-scale mobile radio systems: Dynamic channel REassignment

912

Increasing Channel Occupancy in Large-Scale Mobile Radio Systems: Dynamic Channel REassignment

913

Increasing Channel Throughput by Optimizing Delay, Queue Limit and Window Size in TCP/IP Network

914

Increasing Chuanyu Grid-to-Central China Mains Grid Power Transfer Capability by 550kiV Fixed Series Capacitor FSC Fengie

915

Increasing circuit functionality and power density in power hybrids

916

Increasing classification accuracy of relevance vector machine on hyperspectral images with preprocessing

917

Increasing Client Satisfaction: Request Scheduling for Information Service

918

Increasing Cloud power efficiency through consolidation techniques

919

Increasing cluster uniqueness in Fuzzy C-Means through affinity measure

920

Increasing CLV and Retention Process in E-CRM Using Advanced Model

921

Increasing coding opportunities using maximum-weight clique

922

Increasing colour image segmentation accuracy by means of fuzzy post-processing

923

Increasing communication between a man and a dog

924

Increasing communication reliability in manufacturing environments

925

Increasing competitiveness of third party logistics with RFID

926

Increasing completion of neural networks coursework

927

Increasing complexity of driving situations and its impact on an ADAS for anticipatory assistance for the reduction of fuel consumption

928

Increasing component reliability by eliminating solder interfaces

929

Increasing compression of JPEG images using steganography

930

Increasing compression ratio of low complexity compressive sensing video encoder with application-aware configurable mechanism

931

Increasing computational density of application-specific systems

932

Increasing concurrent transmissions in CDMA ad hoc networks

933

Increasing Connection Lifetimes through Dynamic Distribution of Budgeted Power

934

Increasing Connectivity in VANETs Using Public Transport Backbones

935

Increasing Connectivity in Wireless Sensor-Actuator Networks Using Dynamic Actuator Cooperation

936

Increasing contribution of stochastic methods in the characterization of complex systems: Reverberation chamber and urban environment

937

Increasing Cooperation [President's Message]

938

Increasing Coordination Demands and the Impact on CIO Rank

939

Increasing Coordination within a Maternity Ward through a CSCW-based Approach

940

Increasing copper production in electrochemical plants using new small transformer - Rectifiers in parallel with existing power rectifiers

941

Increasing Correlation using a Few Bits for Multiple Description Coding

942

Increasing cost-efficiency of substation automation systems by centralised protection functions

943

Increasing coverage and maximum CFO in DFT-s-OFDM for Machine-Type Communications

944

Increasing Coverage of Syntactic Subcategorization Patterns in FrameNet Using Verbnet

945

Increasing Crane Payload Swing by Shaping Human Operator Commands

946

Increasing crossover operator efficiency in multiobjective nonlinear systems identification

947

Increasing current testing resolution

948

Increasing data center network visibility with cisco NetFlow-Lite

949

Increasing data historian efficiency

950

Increasing data rate over wireless channels

951

Increasing data rates through iterative coding and antenna diversity in OFDM-based wireless communication

952

Increasing data throughput in PIPE coding using extended v2v-codes

953

Increasing data TLB resilience to transient errors

954

Increasing data-bandwidth to instruction-set extensions through register clustering

955

Increasing database concurrency control based on attribute level locking

956

Increasing Defect Coverage by Generating Test Vectors for Stuck-Open Faults

957

Increasing delay-Doppler resolution using chirp diversity and nonlinear processing

958

Increasing demand for fast p.c.b. throughput

959

Increasing demand for voltage control in secondary substations

960

Increasing density of antibody-antigen binding on a sensor surface by controlling microfluidic environments

961

Increasing Dependability of Component-Based Software Systems by Online Failure Prediction (Short Paper)

962

Increasing depth resolution of electron microscopy of neural circuits using sparse tomographic reconstruction

963

Increasing Design Changeability Using Dynamic Partial Reconfiguration

964

Increasing design changeability using dynamical partial reconfiguration

965

Increasing Design Productivity through Core Reuse, Meta-data Encapsulation, and Synthesis

966

Increasing Design Quality and Engineering Productivity through Design Reuse

967

Increasing Design Search Relevancy using Statistical Methods in Conjunction with Ontologies

968

Increasing Detection Rate of User-to-Root Attacks Using Genetic Algorithms

969

Increasing device lifetime in backbone networks with sleep modes

970

Increasing DHT Data Security by Scattering Data (Invited Paper)

971

Increasing Diagnostic Accuracy by Meta Optimization of Fuzzy Rule Bases

972

Increasing Digital Computer Efficiency with the Aid of Error-Correcting Analog Subroutines

973

Increasing discriminative capability on MAP-based mapping function estimation for acoustic model adaptation

974

Increasing diskette capacity with Floptical technology

975

Increasing Dispersion Tolerance for Quaternary Optical ASK-DPSK by Chirp-Free Modulation

976

Increasing distributed generation penetration in multiphase distribution networks considering grid losses, maximum loading factor and bus voltage limits

977

Increasing distributed generation penetration using soft normally-open points

978

Increasing distributed generation using automatic voltage reference setting technique

979

Increasing distributed storage survivability with a stackable RAID-like file system

980

Increasing distribution network capacity using automation to reduce carbon impact

981

Increasing distribution system model accuracy with extensive deployment of smart meters

982

Increasing Diversity in Coverage Test Suites Using Model Checking

983

Increasing diversity in higher education by examining African-American STEM mentors´ mentoring approaches

984

Increasing Diversity in Network Intrusion Detection System Evaluation

985

Increasing Diversity with Feedback: Balanced Space-Time Block Coding

986

Increasing diversity with non-standard signal sets in wireless OFDM systems

987

Increasing Doherty Amplifier Average Efficiency Exploiting Device Knee Voltage Behavior

988

Increasing downlink cellular throughput with limited network MIMO coordination

989

Increasing driving safety with a multiple vehicle detection and tracking system using ongoing vehicle shadow information

990

Increasing DSM savings on a process plant by selecting the correct tariff structure

991

Increasing dynamic range of practical microwave spectrum analysis by reducing or compensating system noise

992

Increasing Eco-efficiency through Holistic Green Supply Chain Management

993

Increasing Effective Radiated Power in Wireless Sensor Networks with Channel Coding Techniques

994

Increasing effectiveness of early warning through smart ICT

995

Increasing efficiency and output power of HFHPTA by injection of two harmonics

996

Increasing efficiency by means of human-centred system design

997

Increasing efficiency in robot-supported assemblies through predictive mechanisms: An experimental evaluation

998

Increasing efficiency in visualizing large sets of 3D models on the web

999

Increasing Efficiency of a Chemical-Mechanical Polishing of the Silicon Wafer

1000

Increasing efficiency of an DSP-controlled converter by on-the-fly changing of the gate drive method