<< مقالات لاتين >>
<< بر اساس عنوان >>
1
An improved method for the reconstruction of a distributed force acting on a vibrating structure
2
An improved method for the recovery of petroleum hydrocarbons from fish muscle tissue
3
An Improved Method for the Regiospecific Synthesis of Polysubstituted [2.2]Paracyclophanes
4
An improved method for the simultaneous analysis of phenolic and steroidal estrogens in water and sediment
5
An improved method for the synthesis of 1-monoolein
6
An improved method for the synthesis of 6-substituted-5H-pyrrolo[2,3-b]pyrazines via palladium-catalyzed heteroannulation using microwave heating
7
An improved method for the synthesis of aminothiophenes precursors of thieno[2,3-b]pyrrole
8
An Improved Method for the Synthesis of Cellulose Membrane-Bound Peptides with Free C Termini Is Useful for PDZ Domain Binding Studies Original Research Article
9
An improved method for the synthesis of protected glycosyl fluorides from thioglycosides using N,N-diethylaminosulfur trifluoride (DAST) Original Research Article
10
An improved method for the synthesis of γ-lactones using sodium bromate and sodium hydrogen sulfite
11
An improved method for thin layer chromatographic analysis of saponins
12
An improved method for TIMS high precision neodymium isotope analysis of very small aliquots (1–10 ng)
13
An Improved Method for TOA Estimation in TH-UWB System considering Multipath Effects and Interference
14
An improved method for voice pathology detection by means of a HMM-based feature space transformation
15
An improved method for α-source preparation using neodymium fluoride coprecipitation
16
An improved method for α-source preparation using neodymium fluoride coprecipitation
17
An improved method for α-source preparation using neodymium fluoride coprecipitation
18
An improved method in synchronization of chaotic svstems
19
An improved method of amide synthesis using acyl chlorides
20
An Improved Method of Automated Noise Measurement System in CT Images
21
An improved method of calculating the peak stress distribution for a broad-band random process
22
An improved method of computing the wear factor for total hip prostheses involving the variation of relative motion and contact pressure with location on the bearing surface
23
An improved method of correlation counting using a bi-dimensional data acquisition system
24
An improved method of correlation counting using a bi-dimensional data acquisition system
25
An improved method of damping of generator oscillations
26
An improved method of fitting experimental data to the Hoek–Brown failure criterion
27
An improved method of ion exchange for nitrogen isotope analysis of water nitrate Original Research Article
28
An improved method of measuring C1 power factor of resistance-graded bushings
29
An improved method of ring closing metathesis in the presence of basic amines: application to the formal synthesis of (+)-lentiginosine and other piperidines and carbamino sugar analogs
30
An Improved Method of Static Code Analysis Based on the Context-Sensitive Rules
31
An improved method to accurately calibrate the gantry angle indicators of the radiotherapy linear accelerators
32
An improved method to accurately calibrate the gantry angle indicators of the radiotherapy linear accelerators
33
An improved method to analyse tooth and restoration contour using image analysis: Application in the maxillary anterior teeth in Chinese population
34
An improved method to compute the convex hull of a shape in a binary image
35
An improved method to detect ethyl glucuronide in urine using reversed-phase liquid chromatography and pulsed electrochemical detection Original Research Article
36
An improved method to determine neuromuscular properties using force laws – From single muscle to applications in human movements
37
An improved method to determine SH and –S–S– group content in soymilk protein
38
An improved method to determine the absolute abundance of glycerol dibiphytanyl glycerol tetraether lipids
39
An improved method to directly estimate cellulase adsorption on biomass solids
40
An improved method to enhance high-frequency speech intelligibility in noise
41
An improved method to estimate intrinsic small signal parameters of a GaAs MESFET from measured dc characteristics
42
An improved method to estimate the equivalent circuit parameters in DSSCs
43
An improved method to estimate the fractal dimension of physical fractals based on the Hausdorff definition
44
An improved method to estimate the impact on digital radio receiver performance of radiated electromagnetic disturbances
45
An improved method to evaluate the o-diphenol oxidase activity of soil
46
An improved method to evaluate the o-diphenol oxidase activity of soil
47
An Improved Method to Evaluate the Vehicle s Encounter with Events in the VANET with the Approach of Developing Non-Linear Methods
48
An improved method to extract and purify cystatin from hen egg white
49
An improved method to identify grain boundary creep cavitation in 316H austenitic stainless steel
50
An improved method to identify grain boundary creep cavitation in 316H austenitic stainless steel
51
An improved method to identify irradiated rice by EPR spectroscopy and thermoluminescence measurements
52
An improved method to identify the T-DNA insertion site in transgenic Arabidopsis thaliana genome
53
An improved method to increase the predictive accuracy of the ECR technique
54
An improved method to measure catalase activity in soils
55
An improved method to measure catalase activity in soils
56
An improved method to measure the antenna resistance and radiated power of ICRF-antennas using current probes
57
An improved method to predict second cross virial coefficients
58
An improved method to predict the second virial coefficients of pure compounds
59
An improved method to predict VLE equilibria of subcritical mixtures
60
An improved method validation for rapid determination of acrylamide in foods by ultra-performance liquid chromatography combined with tandem mass spectrometry
61
An improved methodology for assessing risk in aircraft operations at airports, applied to runway overruns
62
An improved methodology for data analysis in accelerated stability studies of peptide drugs: Practical considerations
63
An improved methodology for determining threshold sooting indices from smoke point lamps
64
An improved methodology for predicting the daily hydrologic response of ungauged catchments
65
An improved methodology for selecting similar working days for measured mile analysis
66
An Improved Methodology for the Design of Power System Damping Controllers
67
An improved methodology for the quantification of uronic acid units in xylans and other polysaccharides Original Research Article
68
An improved methodology for the synthesis of 1-C-allyl imino-d-xylitol and -l-arabinitol and their rapid functionalization
69
An improved Metropolis algorithm for hard core systems
70
An Improved Microcontroller-Based Sensorless Brushless DC (BLDC) Motor Drive for Automotive Applications
71
An improved microkinetic model for the water gas shift reaction on copper
72
An improved microstrip plasma for optical emission spectrometry of gaseous species
73
An improved microtitre enzyme immunoassay to measure the boar taint steroid 5α-androst-16-en-3-one in blood plasma of pigs
74
An improved microwave apparatus for phase behaviour measurements in lean gas condensate fluids
75
An improved microwave Clevenger apparatus for distillation of essential oils from orange peel
76
An improved mixed dextran rejection test for characterization of UF membranes in an R&D environment Original Research Article
77
An improved mixed numerical-experimental method for stress field calculation
78
An improved mixed order model for describing thermoluminescence glow curves
79
An improved mixing model providing joint statistics of scalar and scalar dissipation
80
An Improved Mnemonic Device for Thermodynamic Relations
81
An improved mobility analysis for spherical 4R linkages
82
An improved modal analysis for three-dimensional problems using face-based smoothed finite element method
83
An improved modal truncation method for responses to harmonic excitation
84
An improved mode of operation of a transmission electron microscope for wide field off-axis holography
85
An improved mode of operation of a transmission electron microscope for wide field off-axis holography
86
An improved mode superposition method applicable to a coupled structural–acoustic system with a multiple cavity
87
An improved model and a heuristic for capacitated lot-sizing and scheduling in job shop problems
88
An improved model and the thermodynamic calculation method for tailrace tunnel ventilating system in hydropower station
89
An improved model averaging scheme for logistic regression
90
An improved model calculating CO2 solubility in pure water and aqueous NaCl solutions from 273 to 533 K and from 0 to 2000 bar
91
An Improved Model for Assessing the Effectiveness of Hydrogen Water Chemistry in Boiling Water Reactors
92
An improved model for automatic feature-based registration of SAR and SPOT images
93
An improved model for calculating CO2 solubility in aqueous NaCl solutions and the application to CO2–H2O–NaCl fluid inclusions
94
An improved model for calculating the optical rotation of simple saccharides Original Research Article
95
An Improved Model for Full Wave Analysis of Multilayered Frequency Selective Surface with Gridded Square Element
96
An improved model for multistage simulation of glycerol fermentation in batch culture and its parameter identification
97
An improved model for natural convection heat loss from modified cavity receiver of solar dish concentrator
98
An improved model for naturally curved and twisted composite beams with closed thin-walled sections
99
An improved model for noise barriers in a moving fluid
100
An improved model for particle deposition in porous foams
101
An improved model for predicting electrical contact resistance between bipolar plate and gas diffusion layer in proton exchange membrane fuel cells
102
An improved model for predicting fatigue S–N (stress–number of cycles to fail) behavior of glass fiber reinforced plastics
103
An improved model for predicting limiting drawing ratio
104
An improved model for predicting performance of finned tube heat exchanger under frosting condition, with frost thickness variation along fin
105
An improved model for predicting the crack size and plasticity dependence of fatigue crack propagation
106
An improved model for simulation of flotation circuits
107
An improved model for soil ionization around grounding system and its application to stratified soil
108
An improved model for structural vulnerability analysis of power networks
109
An improved model for surround suppression by steerable filters and multilevel inhibition with application to contour detection
110
An improved model for the acoustic radiation impedance of the mouth based on an equivalent electrical network
111
An improved model for the analysis of deformation and stability of multilayer viscoelastic shells
112
An improved model for the analysis of plates stiffened by parallel beams with deformable connection
113
An improved model for the calculation of CO2 solubility in aqueous solutions containing Na+, K+, Ca2+, Mg2+, Cl−, and SO42−
114
An improved model for the disking process
115
An improved model for the dynamic analysis of plates stiffened by parallel beams
116
An improved model for the dynamic analysis of plates stiffened by parallel beams
117
An improved model for the electromagnetic compatibility of all-dielectric self-supporting fiber-optic cable and high-voltage power lines
118
An improved model for the frequency estimate of mass-loaded plates by a combined use of equivalent center mass and stiffness factors
119
An improved model for the frequency estimate of mass-loaded plates by a combined use of equivalent center mass and stiffness factors
120
An improved model for the frequency estimate of mass-loaded plates by a combined use of equivalent center mass and stiffness factors
121
An improved model for the penetration of charged and neutral aerosols in the 4 to 80 nm range through stainless steel and dielectric meshes
122
An improved model for the phase equilibrium of methane hydrate inhibition in the presence of ionic liquids
123
An improved model for the prediction of intra-cell buckling in CFRP sandwich panels under in-plane compressive loading
124
An improved model for two-phase hydrogen flow dynamics
125
An improved model for vehicle routing problem with time constraint based on genetic algorithm
126
An improved model of an ASR pyrolysis reactor for energy recovery
127
An Improved Model of Brain Emotional Learning Algorithm Based on Interval Knowledge
128
An improved model of continuous leaching systems using segregation approach
129
An improved model of direct gauge mediation
130
An improved model of ER fluids in squeeze-flow through model updating of the estimated yield stress
131
An improved model of heat and moisture transfer with phase change and mobile condensates in fibrous insulation and comparison with experimental results
132
An improved model of heat transfer through penguin feathers and down
133
An improved model of induction motors for diagnosis purposes – Slot skewing effect and air–gap eccentricity faults
134
An improved model of man for ESD applications
135
An improved model of the seeded batch crystallization of glucose monohydrate from aqueous solutions Original Research Article
136
An improved model of thin cylindrical piezoelectric layers between isotropic elastic media
137
An improved model predictive control for uncertain systems with input saturation
138
An improved model to evaluate the oxidation kinetics of uranium dioxide during dry storage
139
An improved model to predict energy-based acoustic parameters in Apulian-Romanesque churches
140
An Improved Model to Simulate Mud (Drilling Fluid) Dispersion through Porous Media
141
An improved modeling method to determine the model parameters of photovoltaic (PV) modules using differential evolution (DE)
142
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom
143
An improved modelling for prediction of grade efficiency of electrostatic precipitators with negative corona
144
An Improved Modified Tabu Search Algorithm to Solve the Vehicle Routing Problem with Simultaneous Pickup and Delivery
145
An improved molecular dynamics potential for the Al–O system
146
An improved monotone finite volume scheme for diffusion equation on polygonal meshes
147
An improved morphological approach to background normalization of ECG signals
148
An Improved Motion Vector Estimation Approach for Video Error Concealment Based on the Video Scene Analysis
149
An Improved MPPT Method of Wind Turbine Based on HCS Method by Using Fuzzy Logic System
150
An Improved Multi-Agent Simulation Methodology for Modelling and Evaluating Wireless Communication Systems Resource Allocation Algorithms
151
An improved multiaxial rainflow algorithm for non-proportional stress or strain histories – Part I: Enclosing surface methods
152
An improved multiaxial rainflow algorithm for non-proportional stress or strain histories – Part II: The Modified Wang–Brown method
153
An Improved Multifractal Formalism and Self-Similar Measures
154
An improved multigrid method for Euler equations
155
An improved MULTIMOORA method for multi-valued neutrosophic multi-criteria group decision-making based on prospect theory
156
An improved multiobjective differential evolution based on Pareto-adaptive image-dominance and orthogonal design
157
An improved multi-objective identification of Johnson–Cook material parameters
158
An improved multi-objective particle swarm optimizer for multi-objective problems
159
An Improved Multipath Channel Identification Algorithm Using Mulichannel Linear Prediction
160
An improved multiple model GM-PHD filter for maneuvering target tracking
161
An improved multiple-image radiography method extracting refraction information in analyzer-based imaging
162
An improved multiple-image radiography method extracting refraction information in analyzer-based imaging
163
An Improved Multiplex-Polymerase Chain Reaction Method for Simultaneous Identification and Discrimination of Emerging Escherichia and Shigella Species
164
An improved multipurpose field robot for installing construction materials
165
An improved multistage time stepping for second-order upwind TVD schemes
166
An improved murine femur fracture device for bone healing studies
167
An improved N,N′-diethyl-p-phenylenediamine (DPD) method for the determination of free chlorine based on multiple wavelength detection Original Research Article
168
An improved N2O-method for measuring Cu-dispersion Original Research Article
169
An Improved N-dimensional NURBs-based Metamodel
170
An improved nearly-orthogonal structured mesh generation system with smoothness control functions
171
An improved NEH heuristic to minimize makespan in permutation flow shops
172
An improved NEH-based heuristic for the permutation flowshop problem
173
An improved neural classification network for the two-group problem
174
An improved neural computing method for describing the scatter of S–N curves
175
An improved neural network approach to the determination of aquifer parameters
176
An improved neural network based targeting method for chaotic dynamics
177
An improved neural network for fuzzy reasoning implementation Original Research Article
178
An Improved Neural Network Model in Forecasting Arrivals
179
An improved neutron transport algorithm for HZETRN Original Research Article
180
An Improved Newton s Method Without Direct Function Evaluations
181
An Improved Newtons Method Without Direct Function Evaluations
182
An improved nickel/zinc battery for ventricular assist systems
183
An Improved Node Scheduling Scheme for Resilient Packet Ring Network
184
An improved non-adiabatic FEM model of a line-to-earth fault in buried power cables
185
AN IMPROVED NONLINEAR CHIRP SCALING ALGORITHM BASED ON CURVED TRAJECTORY IN GEOSYNCHRONOUS SAR
186
An Improved Non-Linear Physical Modeling Method for Brace Elements
187
An improved nonuniformity correction algorithm for infrared focal plane arrays which is easy to implement
188
An improved numerical method evaluating exact static element stiffness matrices of thin-walled beam-columns on elastic foundations
189
An improved numerical method for computation of stress intensity factors along 3D curved non-planar cracks in FGMs
190
An improved numerical scheme to evaluate the pressure gradient on unstructured meshes for two-phase flow analysis
191
An improved numerical scheme to study mass transfer over a separation membrane
192
AN IMPROVED NUMERICAL TECHNIQUE FOR SIMULATING THE GROWTH OF PLANAR FATIGUE CRACKS
193
An improved NURBS-based isogeometric analysis with enhanced treatment of essential boundary conditions
194
An improved one-point integration method for large strain elastoplastic analysis Original Research Article
195
An Improved One-Pot Procedure for the Preparation of [11C-Carbonyl]-WAY100635
196
An improved on-line dynamic testing method
197
An improved on-line monitoring procedure for multiloop control systems
198
An improved on-line solid phase extraction coupled HPLC–MS/MS system for quantification of Sifuvirtide in human plasma
199
An improved opposition-based Crow Search Algorithm for Data Clustering
200
An improved optical pH sensor based on polyaniline
201
An improved optimal bit allocation method for sub-band coding
202
An Improved Optimal Protection Coordination for Directional Overcurrent Relays in Meshed Distribution Networks with DG Using a Novel Truth Table
203
An improved optimization algorithm and a Bayes factor termination criterion for sequential projection pursuit
204
An Improved Optimization Model for Scheduling of a Multi-Product Tree-Like Pipeline
205
An improved ordering policy for continuous review inventory systems with arbitrary interdemand time distributions
206
An improved origin-based algorithm for solving the combined distribution and assignment problem
207
An improved orthotopic xenotransplant procedure for human lung cancer in SCID bg mice
208
An improved P(V)-N activation strategy for the synthesis of nucleoside diphosphate 6-deoxy-l-sugars
209
An improved palladium(II)-catalyzed method for the synthesis of aryl ketones from aryl carboxylic acids and organonitriles
210
An Improved Parallel Genetic Algorithm for Optimal Sensor Placement of Wireless Sensor Networks
211
An improved parallel hybrid bi-conjugate gradient method suitable for distributed parallel computing
212
An improved parameter estimation procedure in lake modelling
213
An improved Parks equation for prediction of surface charge properties of composite ceramic membranes
214
An improved part grouping model for minimizing makespan in FMS
215
An improved particle correction procedure for the particle level set method
216
An Improved Particle Swarm Optimization Algorithm for Energy Management in Distribution Grid Considering Distributed Generators
217
An Improved Particle Swarm Optimization Algorithm for Optimal Allocation of Distributed Generation Units in RadialPower Systems
218
AN IMPROVED PARTICLE SWARM OPTIMIZATION ALGORITHM FOR PATTERN SYNTHESIS OF PHASED ARRAYS
219
An improved particle swarm optimization algorithm for reliability problems
220
An Improved Particle Swarm Optimization for a Class of Capacitated Vehicle Routing Problems
221
An improved particle swarm optimization for exponential stabilization of a singular linear time-varying system
222
An Improved Particle Swarm Optimization for Induction Motor Parameter Determination
223
An improved particle swarm optimization method for multirate filter bank design
224
An improved particle swarm optimization with a new swap operator for team formation problem
225
An improved particle swarm optimization with a new swap operator for team formation problem
226
An improved partition of unity finite element model for diffraction problems
227
An improved parton shower algorithm in QED
228
An improved pathway to 6,6-disubstituted fulvenes
229
An improved pattern match method with flexible mask for automatic inspection in the LCD manufacturing process
230
An improved Pattern Search based algorithm to solve the Dynamic Economic Dispatch problem with valve-point effect
231
An improved pattern-guided evolution approach for the development of adaptive individual-based ecological models
232
An improved pattern-guided evolution approach for the development of adaptive individual-based ecological models
233
An improved PCA method with application to boiler leak detection
234
An improved PCR-based method for detection and differentiation of Entamoeba histolytica and Entamoeba dispar in formalin-fixed stools
235
An improved penalty immersed boundary method for fluid–flexible body interaction
236
An improved penalty method for power-law Stokes problems
237
An improved penetrometer technique for determining bale density
238
An improved perfectly matched layer absorbing boundary condition for microstrip line problems
239
An improved permanent magnet quadrupole design with larger good field region for high intensity proton linacs
240
An improved permanent magnet quadrupole design with larger good field region for high intensity proton linacs
241
An improved permeability model for fractal aggregates settling in creeping flow
242
An improved perturbation theory and van der Waals one-fluid theory of binary fluid mixtures Part 2. Phase equilibria
243
An improved perturbation theory and van der Waals one-fluid theory of binary fluid mixtures: Part 1. Total and excess thermodynamic properties
244
An improved perturbed hard-sphere equation of state
245
An improved phase method for time-delay estimation
246
An improved phenomenological model for prediction of solvent permeation through ceramic NF and UF membranes
247
An improved photographic method to estimate the shading effect of obstructions
248
An improved photoionization detector with a micro gas chromatography column for portable rapid gas chromatography system
249
An Improved Physically-Based Soft Shadow Volume Algorithm
250
An improved piecewise approximation algorithm for image compression
251
An improved PIN photodetector with integrated JFET on high-resistivity silicon
252
An improved PIN photodetector with integrated JFET on high-resistivity silicon
253
An Improved Pixon-Based Approach for Image Segmentation
254
An improved planar-gate triode with CNTs field emitters by electrophoretic deposition
255
An improved plant regeneration system and ex vitro acclimatization of Ocimum basilicum L.
256
An improved PLIC-VOF method for tracking thin fluid structures in incompressible two-phase flows
257
An improved pneumatic sample transport system for measurement of activation cross-sections with d-D neutrons in the energy range between 2.1 and 3.1 MeV
258
An improved pneumatic sample transport system for measurement of activation cross-sections with d-D neutrons in the energy range between 2.1 and 3.1 MeV
259
AN IMPROVED POLAR FORMAT ALGORITHM WITH PERFORMANCE ANALYSIS FOR GEOSYNCHRONOUS CIRCULAR SAR 2D IMAGING
260
An improved polynomial approach to the exact perturbative evaluation of low-frequency dynamic polarizabilities for a ground-state hydrogen atom
261
An improved porous medium model for microchannel heat sinks
262
An improved post-filter of acoustic echo canceller based on subband implementation
263
An improved potential energy surface for the degenerate rearrangement of (HF)2
264
An Improved Power Conditioning System Based on Capacitor Current Feedback Active Damping of an LCL-Type Grid-Tied NPC Inverter
265
An Improved Power Estimation for Mobile Satellite Communication Systems
266
An improved powered ankle–foot orthosis using proportional myoelectric control
267
An Improved pPZP Vector for Agrobacterium -mediated Plant Transformation
268
An improved practical synthesis of protected α-amino selenocarboxylates and its application to the synthesis of N-(α-aminoacyl)sulfonamides
269
An improved precedence rule for single machine sequencing problems with quadratic penalty
270
An improved precise integration method for nonlinear dynamic system
271
An improved preconditioned LSQR for discrete ill-posed problems Original Research Article
272
An improved prediction correction method for monotone variational inequalities with separable operators
273
An improved prediction of stability lobes using nonlinear thin wall dynamics
274
An improved predictor/multi-corrector algorithm for a time-discontinuous Galerkin finite element method in structural dynamics
275
An improved preparation and a new application of trichloromethylcarbinols from enolizable ketones
276
An improved preparation of 1,3-dialkylimidazolium tetrafluoroborate ionic liquids using microwaves
277
An improved preparation of 1-methyl-3-propylimidazolium iodide and its application in dye-sensitized solar cells
278
An improved preparation of 3-ethyl-1-methylimidazolium trifluoroacetate and its application in dye sensitized solar cells
279
An improved preparation of cyclohexylammonium allyl and d-glycer-1′-yl 6-deoxy-6-C-sulfonato-α-d-glucopyranosides
280
An improved preparation of epoxides from carbonyl compounds by using diiodomethane/methyllithium: synthetic applications
281
An improved preparation of α-fluorinated propargylphosphonates and the solid phase synthesis of α-hydroxy-γ-TIPS propargylphosphonate ester
282
An improved prism energy analyzer for neutrons
283
An improved prism energy analyzer for neutrons
284
An improved privacy-preserving DWT-based collaborative filtering scheme
285
An improved probability bound for the Approximate S-Lemma
286
An improved procedure for bump plating of planar diodes
287
An improved procedure for detection and enumeration of walrus signatures in airborne thermal imagery
288
An improved procedure for flow-based turbidimetric sulphate determination based on a liquid core waveguide and pulsed flows Original Research Article
289
An improved procedure for nucleoside synthesis using glycosyl trifluoroacetimidates as donors
290
An improved procedure for radiochemical processing of activated fusion-reactor-relevant V–Cr–Ti alloy
291
An improved procedure for separation/purification of boron from complex matrices and high-precision measurement of boron isotopes by positive thermal ionization and multicollector inductively coupled plasma mass spectrometry
292
AN IMPROVED PROCEDURE FOR THE DETERMINATION OF HOT SPOT STRESSES IN TUBULAR JOINTS
293
An improved procedure for the diastereoselective addition of triorganozincates to N-(tert-butanesulfinyl)imines: use of catalytic dialkylzinc
294
An improved procedure for the lateral lithiation of ethyl 4-acetyl-5-methyl-3-isoxazolyl carboxylate
295
An improved procedure for the preparation of 8-substituted guanines
296
An improved procedure for the preparation of aminomethyl polystyrene resin and its use in solid phase (peptide) synthesis
297
An improved procedure for the preparation of β-thiohydroximates for glucosinolate synthesis
298
An improved procedure for the separation of (+) or (−)-isopinocampheol, the major side product of the oxidation workup procedure of Brown’s asymmetric crotylborations
299
An improved procedure for the synthesis of branched polyethylene glycols (PEGs) with the reporter dipeptide met-βala for protein conjugation
300
An improved procedure for the synthesis of vinylphosphonate-linked nucleic acids
301
An Improved Procedure in Detecting the Stability Robustness of Systems With Uncertain Delay
302
An improved process for H2SO4 decomposition step of the sulfur-iodine cycle
303
An improved process for the preparation of sodium cellulose sulphate
304
An Improved Process for the Production of 5-Methyl-1,2,4-triazolo(3,4-b) benzothiazole as a FungicideAn Improved Process for the Production of 5-Methyl-1,2,4-triazolo(3,4-b) benzothiazole as a Fungicide
305
An improved process for the purification of phosphogypsum
306
An improved process for the synthesis of DMTMM-based coupling reagents
307
An improved process of isomaltooligosaccharide production in kimchi involving the addition of a Leuconostoc starter and sugars
308
An improved product construction for large sets of Kirkman triple systems
309
An improved product-process for cleaner chrome tanning in leather processing
310
An improved program for the calculation of high-resolution fourier coefficients used for shape analysis
311
An improved protocol for 87Sr/86Sr by laser ablation multi-collector inductively coupled plasma mass spectrometry using oxide reduction and a customised plasma interface
312
An improved protocol for electrodialytic desalination yielding mineral-balanced potable water Original Research Article
313
An improved protocol for ligandless Suzuki–Miyaura coupling in water
314
An improved protocol for Petasis reaction of 2-pyridinecarbaldehydes
315
An improved protocol for quantification of root-lesion nematode infection in Barley
316
An improved protocol for synthesis of N-arylamides and benzoxazoles by the copper-catalyzed reaction of aryl halides with nitriles
317
An improved protocol for the Prins desymmetrisation of cyclohexa-1,4-dienes
318
An improved protocol for the ruthenium(pybox)-catalyzed asymmetric alkene epoxidation
319
An improved protocol for the selective hydroaminomethylation of arylethylenes
320
An improved protocol for the SmI2-promoted C-alkylation of peptides: degradation and functionalization of serine residues in linear and cyclic peptides
321
An improved protocol for the synthesis of antipodal β-tetrabromo-tetraphenylporphyrin and the crystal structure of its Zn(II) complex
322
An improved proximal tephrochronology for Redoubt Volcano, Alaska
323
An improved proximity force approximation for electrostatics Original Research Article
324
An improved PRP conjugate gradient method for optimization computation
325
An Improved Pseudo Distance Scale for Measuring One-to-many Relationships inMultidimensional Scaling
326
An improved pseudospectral approximation of generalized Burger- Huxley and Fitzhugh-Nagumo equations
327
An improved PSO-based charging strategy of electric vehicles in electrical distribution grid
328
An improved PSP scheme using state cooperation for phase synchronization
329
An improved PSPICE model for simulation and analysis of thyristor commutation circuits in DC choppers
330
An improved PTV technique to evaluate the velocity field of non-spherical particles
331
An improved ptychographical phase retrieval algorithm for diffractive imaging
332
An improved ptychographical phase retrieval algorithm for diffractive imaging
333
An improved public-key cipher system based upon diophantine equation
334
An Improved Purification Protocol for Heart and Skeletal Muscle Calpastatin Reveals Two Isoforms Resulting from Alternative Splicing
335
An improved PVS2 cryopreservation technique for Ascocenda Wangsa Gold orchid using protocorm-like bodies
336
An improved pyrolysis route to synthesize carbon-coated CdS quantum dots with fluorescence enhancement effect
337
An improved QSPR study of standard formation enthalpies of acyclic alkanes based on artificial neural networks and genetic algorithm
338
An improved quadratic program for unweighted Euclidean 1-center location problem
339
An improved quadratic program for unweighted Euclidean 1-center location problem
340
An improved quadrilateral finite element for analysis of thin plates
341
An improved quantitative measure of the tendency for volcanic ash plumes to form in water: implications for the deposition of marine ash beds
342
An improved quantum-behaved particle swarm optimization method for short-term combined economic emission hydrothermal scheduling
343
An Improved Quasilinearization Method for Second Order Nonlinear Boundary Value Problems
344
An improved quaternion Gauss–Newton algorithm for attitude determination using magnetometer and accelerometer
345
An improved Quiet Direct Simulation method for Eulerian fluids using a second-order scheme
346
An improved radiochemical separation of uranium and thorium in environmental samples involving peroxide fusion
347
An Improved Radioimmunoassay for Measurement of Pepsinogen in Porcine Blood Samples
348
An improved rainfall erosivity index obtained from experimental interrill soil losses in soils with a Mediterranean climate
349
An improved randomized approximation algorithm for maximum triangle packing
350
An improved randomized response model: estimation of mean
351
An improved rapid method for the preparation of d-rhamnose
352
An improved rapid procedure for fluorescence in situ hybridization that is applicable to intraoperative cancer cytodiagnosis
353
An improved ratio method for X-ray densitometry
354
An improved read-out system for GaAs charged particle detectors
355
An improved read-out system for GaAs charged particle detectors
356
An improved reagent for chemomechanical caries removal in permanent and deciduous teeth: an in vitro study
357
An improved reagent for determination of aliphatic amines with fluorescence and online atmospheric chemical ionization-mass spectrometry identification Original Research Article
358
An Improved Real-Time Noise Removal Method in Video Stream based on Pipe-and-Filter Architecture
359
An improved real-time PC-based algorithm for extraction of recoil-alpha sequences in heavy-ion induced nuclear reactions
360
An improved real-time PC-based algorithm for extraction of recoil-alpha sequences in heavy-ion induced nuclear reactions
361
An Improved Recommender System Based on Forgetting Mechanism for User Interest- Drifting
362
An improved reconstruction method for compressible flows with low Mach number features
363
An improved record system for tracing outcome of “transferred-out” DOTS patients
364
An improved red deer algorithm for addressing a direct current brushless motor design problem
365
An improved reduced-rank CFAR space-time adaptive radar detection algorithm
366
An improved reductant calculus using fuzzy partial evaluation techniques
367
An improved region-based model with local statistical features for image segmentation
368
An improved register-transfer level functional partitioning approach for testability
369
An improved Reissner–Mindlin triangular element Original Research Article
370
An improved RELAP5/MOD3.3 reflood model considering the effect of spacer grids
371
An Improved Reliability Cuk Based Solar Inverter With Sliding Mode Control
372
An improved reliability model for redundant protective systems-Markov models
373
An improved remote sensing technique for estimating tool–chip interface temperatures in turning
374
An improved REP recovery and the effectivity robustness test
375
An improved representation theorem of L-fuzzy sets
376
An improved reproducing kernel particle method for nearly incompressible finite elasticity Original Research Article
377
An improved reservoir oxide cathode
378
An improved response surface method for the determination of failure probability and importance measures
379
An improved result for complete stability of delayed cellular neural networks
380
An improved result on the stability of uncertain T–S fuzzy systems with interval time-varying delay
381
An improved reversed-phase liquid chromatographic method for the analysis of low-molecular mass organic acids in plant root exudates
382
An improved r-factor algorithm for TVD schemes
383
An improved -Riccati Bنcklund transformation and its applications for the inhomogeneous nonlinear Schrِdinger model from plasma physics and nonlinear optics
384
An Improved RNA Isolation Method for Plant Tissues Containing High Levels of Phenolic Compounds or Carbohydrates
385
An improved RNA isolation method for succulent plant species rich in polyphenols and polysaccharides
386
An Improved RNS Reverse Converter in Three-Moduli Set
387
An improved robust delay-dependent stability criterion for genetic regulatory networks with interval time delays
388
An improved robust hierarchical registration algorithm
389
An improved robust model predictive control design in the presence of actuator saturation
390
An Improved Robust Predictive Current Regulation Algorithm
391
An improved robust topology optimization approach using multiobjective evolutionary algorithms
392
An improved room acoustic model
393
AN IMPROVED ROTOR MODEL WITH EQUIVALENT DYNAMIC EFFECTS OF THE SUPPORT STRUCTURE
394
An improved route to 1,2-dideoxy-β-1-phenyl- -ribofuranose
395
An improved route to the synthetic of diphenyl α-(diethoxythiophosphorylamino)methylphosphonates
396
An improved ruthenium tetroxide oxidation of marine and lacustrine kerogens: possible origin of low molecular weight acids and benzenecarboxylic acids
397
An improved saddlepoint approximation
398
An improved SAGD analytical simulator: Circular steam chamber geometry
399
An improved sales forecasting approach by the integration of genetic fuzzy systems and data clustering: Case study of printed circuit board
400
An improved sampled-data current-mode-control model which explains the effects of control delay
401
An improved sampling approach in multi-pumping flow systems applied to the spectrophotometric determination of glucose and fructose in syrups Original Research Article
402
AN IMPROVED SCHEME FOR PARAMETER ESTIMATION OF G° DISTRIBUTION MODEL IN HIGH-RESOLUTION SAR IMAGES
403
An improved scheme for self-healing in ATM networks
404
An improved scheme for temperature calculations in food
405
An improved scintillation cell for radon measurements
406
An improved scintillation cell for radon measurements
407
An improved sea state dependency for surface stress derived from in situ and remotely sensed winds Original Research Article
408
An improved search algorithm for motion estimation using adaptive search order
409
An improved search algorithm for vector quantization using mean pyramid structure
410
An Improved Second-Order Sliding-Mode Control Scheme Robust Against the Measurement Noise
411
An improved seeded region growing algorithm
412
An improved seed-mediated growth method to coat complete silver shells onto silica spheres for surface-enhanced Raman scattering
413
An improved self-adaptive PSO technique for short-term hydrothermal scheduling
414
An improved self-organizing CPN-based fuzzy system with adaptive back-propagation algorithm
415
An improved self-resonant PWM forward converter
416
An improved self-stabilizing algorithm for biconnectivity and bridge-connectivity
417
An Improved Semantic Schema Matching Approach
418
An improved semiautomated rapid method of extracting genomic DNA for molecular marker analysis in cocoa, Theobroma cacao L
419
An improved semi-circular bend specimen for investigating mixed mode brittle fracture
420
An improved sensorless decoupled power control scheme of grid connected variable speed wind turbine generator
421
An Improved Sensorless Rotor Position Computation for Integrated Direct Power and Vector Control of S-VSC Interfaced DFIG
422
An Improved Sentiment Analysis Algorithm based on Appraisal Theory and Fuzzy Logic
423
An improved sequential method for AC/MTDC power system state estimation
424
An improved sequential method for principal component analysis
425
An improved sequential quadratic programming algorithm for solving general nonlinear programming problems
426
An improved serpentine flow field with enhanced cross-flow for fuel cell applications
427
An improved Shashlyk calorimeter
428
An improved Shashlyk calorimeter
429
An improved shear rate estimation using rotating coaxial cylinder Fann viscometer
430
An improved shear-membrane theory for multilayered shells
431
An improved sheep flock heredity algorithm for job shop scheduling and flow shop scheduling problems
432
An improved shifting bottleneck procedure for the job shop scheduling problem
433
An Improved Short-Cut Method for Effectiveness Factor Estimation
434
An improved shuffled complex evolution algorithm with sequence mapping mechanism for job shop scheduling problems
435
An Improved Shuffled Frog Leaping Algorithm for Simultaneous Design of Power System Stabilizer and Supplementary Controller for SVC
436
An improved Shuffled Frog-leaping Algorithm to optimize component pick-and-place sequencing optimization problem
437
An improved shuffled frog-leaping algorithm with extremal optimisation for continuous optimisation
438
An Improved Silicon Neuron
439
An improved Šiljakʹs algorithm for solving polynomial equations converges quadratically to multiple zeros
440
An improved similarity measure of generalized trapezoidal fuzzy numbers and its application in multi-attribute group decision making
441
An improved simple method for prediction of entropy of fusion of energetic compounds
442
An improved simple morphological filter for the terrain classification of airborne LIDAR data
443
An improved simulated annealing algorithm for bandwidth minimization
444
An improved simulated annealing algorithm for bilevel multiobjective programming problems with application
445
An improved simulated annealing for facility layout problems in cellular manufacturing systems
446
An improved simulated annealing for hybrid flowshops with sequence-dependent setup and transportation times to minimize total completion time and total tardiness
447
An improved simulated annealing simulation optimization method for discrete parameter stochastic systems
448
An improved simulation approach for the analysis of voltage flicker and the evaluation of mitigation strategies
449
An improved simulation method for pricing high-dimensional American derivatives Original Research Article
450
An improved simulation model for spaceborne scatterometer measurements
451
An improved single sensor parity space algorithm for sequential probability ratio test
452
An Improved Sliding Mode Controller for DC/DC Boost Converters Used in EV Battery Chargers with Robustness against the Input Voltage Variations
453
An Improved Sliding Window Area Method for T Wave Detection
454
An improved small-signal model of the dynamic behavior of PEM fuel cells
455
An Improved SMS User Interface Result Checking System
456
An improved snake model for building detection from urban aerial images
457
An improved soft switched PWM interleaved boost AC–DC converter
458
An improved soft-switching PWM FB DC/DC converter for reducing conduction losses
459
An improved solar cell circuit model for organic solar cells
460
An improved solar neutron telescope installed at a very high altitude in México
461
An improved solar neutron telescope installed at a very high altitude in México
462
An improved solar still: The wick-basin type
463
An improved sol–gel template synthetic route to large-scale CeO2 nanowires
464
An improved solid phosphoric acid catalyst for alkene oligomerization in a Fischer–Tropsch refinery Original Research Article
465
An improved solid-state reaction to synthesize Zr-doped Li4Ti5O12 anode material and its application in LiMn2O4/Li4Ti5O12 full-cell
466
An improved solution algorithm for the constrained shortest path problem
467
An improved solution for the contact of two biphasic cartilage layers
468
An improved solution to capillary rise of water in soils
469
An improved solution to replenishment lot size problem with discontinuous issuing policy and rework, and the multi-delivery policy into economic production lot size problem with partial rework
470
An improved sonochemical reactor
471
An improved sonochemical reactor
472
An improved species based genetic algorithm and its application in multiple template matching for embroidered pattern inspection
473
An improved spectral analysis of the stray flux component for the detection of air-gap irregularities in squirrel cage motors
474
An improved spectral subtraction method for speech enhancement using a perceptual weighting filter
475
An improved spectrophotometric method for the determination of free, bound and total N-acetylneuraminic acid in biological fluids
476
An improved spectrum superposition method for structures with rigid modes Original Research Article
477
An improved speed and position estimator for salient permanent-magnet synchronous motors
478
An improved SPH method for modeling liquid sloshing dynamics
479
An improved SPH method: Towards higher order convergence
480
AN IMPROVED SPHERICAL ANTENNA ARRAY FOR WIDEBAND PHASE MODE PROCESSING
481
An improved SQP algorithm for solving minimax problems
482
An Improved SSPCO Optimization Algorithm for Solve of the Clustering Problem
483
An improved stability criterion for a class of neutral differential equations
484
An improved stability criterion for fixed-point state-space digital filters using two’s complement arithmetic
485
An improved stabilization method for linear time-delay systems
486
An improved stable adaptive fuzzy control method
487
AN IMPROVED STANDING-WAVE-TYPE SLOSHING ABSORBER
488
An improved starting strategy for voltage-source inverter fed three phase induction motor drives under inverter fault conditions
489
An improved state-parameter analysis of ecosystem models using data assimilation
490
An improved state-parameter analysis of ecosystem models using data assimilation
491
An improved statistical analysis of the least mean fourth (LMF) adaptive algorithm
492
An improved statistical approach to merge satellite rainfall estimates and raingauge data
493
An improved statistical damage constitutive model for warm frozen clay based on Mohr–Coulomb criterion
494
An improved statistical model for predicting the deuterium ingress in zirconium alloy pressure tubes
495
An improved stator flux estimation for speed sensorless stator flux orientation control of induction motors
496
An improved stator flux estimation in steady-state operation for direct torque control of induction machines
497
An Improved Stereocontrolled Synthesis of Pyochelin, Siderophore of Pseudomonas aeruginosa and Burkholderia cepacia
498
An improved stereoselective total synthesis of (R)-rugulactone
499
An improved stochastic algorithm for temperature-dependent homogeneous gas phase reactions
500
An improved stochastic separated flow model for turbulent two-phase flow
501
An Improved Straight-Line Fitting Method for Analyzing Pumping Test Recovery Data
502
An improved strain gradient approach for determination of deformation localization and forming limit diagrams
503
An improved strategy for regression of biophysical variables and Landsat ETM+ data
504
An improved strategy in controlling chaotic dynamics to any desired orbit
505
An Improved Structure and Analysis of Asymmetrical Spacer Nanowire Tunnel Field Effect Transistor
506
An improved structure models to explain retention behavior of atmospheric nanoparticles
507
An improved structure models to explain retention behavior of atmos-pheric nanoparticles
508
An Improved Structure-Property Model for Predicting Melting-Point Temperatures
509
An improved study of the kappa resonance and the non-exotic s wave πK scatterings up to image of LASS data Original Research Article
510
An improved sum-of-disjoint-products technique for the symbolic network reliability analysis with known minimal paths
511
An improved sum-of-disjoint-products technique for the symbolic network reliability analysis with known minimal paths
512
An improved supersymmetric SU(5)
513
An improved surface radiation condition for high-frequency acoustic scattering problems Original Research Article
514
An improved surface-based method for DNA computation
515
An Improved Surgical Outcome with the Use of Intraoperative Discography
516
An improved surrogate method for detecting the presence of chaos in gait
517
An improved SVD-based watermarking technique for copyright protection
518
An Improved SVM Based on Similarity Metric
519
An improved SWAT-based computational framework for identifying critical source areas for agricultural pollution at the lake basin scale
520
An improved SWAT-based computational framework for identifying critical source areas for agricultural pollution at the lake basin scale
521
An improved SWOT evidential reasoning based approach for strategy evaluation under uncertainty
522
An improved symplectic precise integration method for analysis of the rotating rigid–flexible coupled system
523
An improved synergetic algorithm for image classification
524
An Improved Synthesis and Preliminary Biodistribution Study of a Technetium-99m-labeled 2-amino-2-deoxy(thioacetyl)-D-glucose Complex ([99mTc]-TA-DG) As a Tumor Imaging Agent
525
An improved synthesis and some reactions of diethyl 4-oxo-4H-pyran-2,5-dicarboxylate
526
An improved synthesis method for indenes and styrenes by use of a ZnO/Al2O3 spinel catalyst Original Research Article
527
An improved synthesis method of ceria-carbonate based composite electrolytes for low-temperature SOFC fuel cells
528
An Improved Synthesis of (-)-Martinellic Acid via Radical Addition-Cyclization-Elimination Reaction of Chiral Oxime Ether
529
An improved synthesis of (−)-brevisamide, a marine monocyclic ether amide of dinoflagellate origin
530
An improved synthesis of (2E,4Z)-6-(benzyloxy)-4-bromohexa-2,4-dien-1-ol
531
An Improved Synthesis of [11C]L-703,717 as a Radioligand for the Glycine Site of the NMDA Receptor
532
An improved synthesis of 1,1-dimethylethyl 6-cyanomethyl-2,2-dimethyl-1,3-dioxane-4-acetate, a key intermediate for atorvastatin synthesis
533
An improved synthesis of 1,2,4-oxadiazoles on solid support
534
An Improved Synthesis of 1,2,4-Triazoles using Ag2CO3
535
An improved synthesis of 1,6-anhydro-2,3-di-O-benzyl-β-d-xylo-hexopyranos-4-ulose
536
An improved synthesis of 1-methyl-1H-pyrazole-4-boronic acid pinacol ester and its corresponding lithium hydroxy ate complex: application in Suzuki couplings
537
An improved synthesis of 2-(1,2,4-thiadiazol-5-yl)pyridine by interception of an intermediate involved in a competing cyclisation reaction
538
An improved synthesis of 2-oxa-7-azaspiro[3,5]nonane and analogs as novel reagents in medicinal chemistry
539
An improved synthesis of 3-aminoestrone
540
An improved synthesis of 5′-fluoro-5′-deoxyadenosines
541
An improved synthesis of 5-thio-d-ribose from d-ribono-1,4-lactone
542
An improved synthesis of a fluorescent gabapentin–choline conjugate for single molecule detection
543
An Improved Synthesis of a Galactosylated Hydroxylysine Building Block and its use in Solid-Phase Glycopeptide Synthesis
544
An improved synthesis of a key intermediate for (+)-biotin from d-mannose
545
An improved synthesis of a novel α1A partial agonist including a new two-step synthesis of 4-fluoropyrazole
546
An improved synthesis of a selective αvβ3-integrin antagonist cyclo(-RGDfK-)
547
An improved synthesis of an important S-sialylnucleoside analogue
548
An improved synthesis of an umbelliferyl 5-thioxylopyranoside, precursor of the antithrombotic drug Iliparcil
549
An improved synthesis of arsenic–biotin conjugates Original Research Article
550
An improved synthesis of Biginelli-type compounds via phase-transfer catalysis
551
An improved synthesis of bis(1,3-di-N-tert-butylimidazol-2-ylidene)palladium(0) and its use in C–C and C–N coupling reactions
552
An Improved Synthesis of Chacotriose
553
An improved synthesis of cis,cis-1,3,5-triaminocyclohexane. Synthesis of novel hexadentate ligand derivatives for the preparation of gallium radiopharmaceuticals
554
An improved synthesis of cyanohydrins in the presence of solid LiClO4 under solvent-free conditions
555
An improved synthesis of dansylated α-galactosylceramide and its use as a fluorescent probe for the monitoring of glycolipid uptake by cells Original Research Article
556
An improved synthesis of diiodonoradamantane
557
An improved synthesis of disulfides linked β-cyclodextrin dimer and its analytical application for dequalinium chloride determination by spectrofluorimetry Original Research Article
558
An improved synthesis of ethyl cis-5-iodo-trans-2-methylcyclohexanecarboxylate, a potent attractant for the Mediterranean fruit fly
559
An improved synthesis of Fmoc-N-methyl serine and threonine
560
An improved synthesis of haloacetamidine-based inactivators of protein arginine deiminase 4 (PAD4)
561
An improved synthesis of hydroxymethyl bipyridines
562
An improved synthesis of iodohydrins from alkenes
563
An improved synthesis of isonitrosoacetanilides
564
An improved synthesis of Kagan’s menthyl substituted titanocene and zirconocene dichloride, comparison of their crystal structures, and preliminary catalyst evaluation
565
An improved synthesis of Lu AA20465
566
An improved synthesis of morpholino-glycoamino acids
567
An improved synthesis of N-aryl and N-heteroaryl substituted homopiperazines—from conventional thermal conditions to scaling-up using microwave heating
568
An improved synthesis of N-aryl and N-heteroaryl substituted piperidones
569
An Improved Synthesis of Optically Pure 4-Boc-5,6-Diphenylmorpholin-2-one and 4-Cbz-5,6-Diphenylmorpholin2-one
570
An improved synthesis of piperazino-piperidine based CCR5 antagonists with flexible variation on pharmacophore sites
571
An improved synthesis of psammaplin A
572
An Improved Synthesis of Pyridoxine via [2+2+2] Cyclization of Acetylenes and Nitriles
573
An improved synthesis of pyrimidine- and pyrazole-based acyclo-C-nucleosides as carbohybrids
574
An improved synthesis of releasable luciferin–CPP conjugates
575
An improved synthesis of rhinocerotinoic acid
576
An improved synthesis of solid-supported reagents (SSRs) for selective acylation of amines by microwave irradiation
577
An improved synthesis of substituted benzo[b]thiophenes using microwave irradiation
578
An improved synthesis of the broad spectrum matrix metalloprotease inhibitor marimastat
579
An improved synthesis of the C15–C28 fragment of laulimalide
580
An improved synthesis of the C-linked glucuronide of N-(4-Hydroxyphenyl)retinamide
581
An improved synthesis of the saponin, polyphyllin D Original Research Article
582
An improved synthesis of the scyphostatin side-chain
583
An Improved Synthesis of Trisnaphtho[3.3.3]propellane
584
An improved synthesis of ultrafiltration zirconia membranes via the sol–gel route using alkoxide precursor
585
An improved synthesis of V-PROLI/NO, a cytochrome P450-activated nitric oxide prodrug
586
An improved synthesis of α-AZA, α-AZP and α-AZG, the precursors to clinical markers of tissue hypoxia
587
An improved synthesis of α-phosphonoenamines based on a modified Peterson olefination
588
An improved synthesis route to graphene for molecular sensor applications
589
An improved synthesis, characterization, and X-ray studies of 5-tert-butyl-3-nitrophthalonitrile
590
An improved synthesis, crystal structures, and metallochromism of salts of [Ru(tolyl-terpy)(CN)3]−
591
An improved synthetic approach to 7-[3-amino-4-O-(α-l-mycarosyl)-2,3,6-trideoxy-α-l-lyxo-hexopyranosyl]daunorubicinone and its interaction with human serum albumin Original Research Article
592
An improved system for modelling Spanish emissions: HERMESv2.0
593
An improved system for the control of dissolved oxygen in freshwater aquaria
594
An Improved System for the Generation and Analysis of Mutant Proteins Containing Unnatural Amino Acids in Saccharomyces cerevisiae
595
An Improved Tabu Search Algorithm for Job Shop Scheduling Problem Trough Hybrid Solution Representations
596
An improved tabu search algorithm for the fixed-spectrum frequency-assignment problem
597
An improved tabu search approach for solving the job shop scheduling problem with tooling constraints Original Research Article
598
An improved tabu search for economic dispatch with multiple minima
599
An improved tank in series model for PEMFC
600
An improved TCF sequence for biobleaching kenaf pulp: Influence of the hexenuronic acid content and the use of xylanase
601
An improved teaching-learning-based optimization algorithm for solving unconstrained optimization problems
602
An improved technique for a stapled transabdominal esophagojejunostomy
603
An improved technique for concentration measurement of galactomannan solutions by differential refractive index
604
An improved technique for concentration measurement of galactomannan solutions by differential refractive index
605
An improved technique for determining transport parameters in cooling processes Original Research Article
606
An improved technique for estimating accidental coincidences in β–γ coincidence counting
607
An improved technique for estimating accidental coincidences in β–γ coincidence counting
608
An improved technique for exfoliating and dispersing nanoclay particles into polymer matrices using supercritical carbon dioxide
609
An improved technique for interpolating frequency-dependent polarizabilities through an analytically integrable expression
610
An improved technique for modeling initial reservoir hydrocarbon saturation distributions: applications in Illinois (USA) Aux Vases oil reservoirs
611
An improved technique for the batch processing of small wholewood samples to α-cellulose
612
An improved technique for the extraction of stochastic parameters from stabilograms
613
An improved technique for the reconstruction of former glacier mass-balance and dynamics
614
An improved technique for the solution of edge crack problem for finite plate
615
An improved technique of eye drop elf-adminitration for patient with limited viion
616
An improved technique to measure firn diffusivity
617
An improved tectonic model for the Eocene opening of the Norwegian–Greenland Sea: Use of modern magnetic data
618
An improved temporal clustering analysis method applied to whole-brain data in fMRI study
619
An improved term ordering for the ideal of commuting matrices
620
An improved termination structure for silicon radiation detectors with all-Ptype multiguard and cut-line implants
621
An improved test for heteroskedasticity using adjusted modified profile likelihood inference
622
An improved test of the exponential decay law
623
An improved testing scheme for catastrophic fault patterns
624
An improved theoretical model of a metal tube under free external inversion
625
An improved theoretical model of orientation softening and cross-shear wear of ultra high molecular weight polyethylene
626
An improved theoretical prediction for the 2-jet rate in e+e− annihilation
627
An improved theory for temperature-dependent Arrhenius parameters in mesoscale surface diffusion
628
An improved theory of laminated Reissner–Mindlin plates
629
An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector
630
An improved thermal lattice Boltzmann model for rarefied gas flows in wide range of Knudsen number
631
An improved thermal response test for U-tube ground heat exchanger based on optical fiber thermometers
632
An improved thermodynamic model of metal-olivine-pyroxene stability domains
633
An improved thermodynamic modeling of the Fe–Cr system down to zero kelvin coupled with key experiments
634
An improved third order theory and assessment of efficient zigzag theory for angle-ply flat hybrid panels
635
An improved three party authenticated key exchange protocol using hash function and elliptic curve cryptography for mobile-commerce environments
636
An improved three-dimensional coupled fluid–structure model for Coriolis flowmeters
637
An improved three-dimensional model for growth of oxide films induced by laser heating
638
An improved three-node hybrid-mixed element for Mindlin/Reissner plates
639
An improved three-point bending method by nanoindentation
640
An improved tie force method for progressive collapse resistance design of reinforced concrete frame structures
641
An improved time domain analysis of the charge pumping current
642
An Improved Time Domain Arc Furnace Model for Harmonic Analysis
643
AN IMPROVED TIME DOMAIN FINITE ELEMENT-BOUNDARY INTEGRAL SCHEME FOR ELECTROMAGNETIC SCATTERING FROM 3-D OBJECTS
644
An Improved Time-Reversal-Based Target Localization for Through-Wall Microwave Imaging
645
An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack
646
An improved TLBO with elite strategy for parameters identification of PEM fuel cell and solar cell models
647
An Improved Token-Based and Starvation Free Distributed Mutual Exclusion Algorithm
648
An improved tool–holder model for RCSA tool-point frequency response prediction
649
An improved topology of electronic ballast with wide dimming range, PFC and low switching losses using PWM-controlled soft-switching inverter
650
An improved topology of inductor-switching DC-DC converter
651
An improved total synthesis of spermatinamine, an inhibitor of isoprenylcysteine carboxy methyltransferase
652
An improved total synthesis of UDP-N-acetyl-muramic acid
653
An improved tracking Kalman filter using a multilayered neural network
654
An Improved Training Algorithm for Nonlinear Kernel Discriminants
655
An improved transfer map approach to longitudinal beam dynamics
656
An improved transfer map approach to longitudinal beam dynamics
657
An improved transformer top oil temperature model for use in an on-line monitoring and diagnostic system
658
An improved transformerless grid connected photovoltaic inverter with reduced leakage current
659
An Improved Transformerless Grid-Connected PV System With Related Control Strategy to Reduce Leakage Current, Extract Maximum Power Point and Control Power
660
An Improved Transient Calorimetric Technique for Measuring the Total Hemispherical Emittance of Nonconducting Materials (Emittance Evaluation of Glass Sheets)
661
An improved transition matrix for variational quantum Monte Carlo
662
An improved transmission line matrix model for the 2D ideal wedge benchmark problem
663
An improved transmission-line model of grounding system
664
An improved treatment of saturation nonlinearity with its application to control of systems subject to nested saturation
665
An Improved Trust Region Method Equipped by Filter Technique
666
An improved TS algorithm for loss-minimum reconfiguration in large-scale distribution systems
667
An improved tuning method of fractional order proportional differentiation (FOPD) controller for the path tracking control of tractors
668
An improved two-layer algorithm for estimating effective soil temperature in microwave radiometry using in situ temperature and soil moisture measurements
669
An improved two-point velocity method for estimating the roughness coefficient of natural channels
670
An improved two-resin method for the cleavage of tertiary amines from REM resin
671
AN IMPROVED TWO-SCALE MODEL WITH VOLUME SCATTERING FOR THE DYNAMIC OCEAN SURFACE
672
An improved two-step floating catchment area method for supporting district building energy planning: A case study of Yongding County city, China
673
An improved typology of cutting and packing problems
674
An improved UHPLC-UV method for separation and quantification of carotenoids in vegetable crops
675
An improved Ullmann–Ukita–Buchwald–Li conditions for CuI-catalyzed coupling reaction of 2-pyridones with aryl halides
676
An Improved Under-Frequency Load Shedding Scheme in Distribution Networks with Distributed Generation
677
An improved unified description of charge-carrier mobilities in disordered organic semiconductors
678
An improved unified solver for compressible and incompressible fluids involving free surfaces. II. Multi-time-step integration and applications Original Research Article
679
An improved unified solver for compressible and incompressible fluids involving free surfaces. Part I. Convection Original Research Article
680
An improved unified viscoplastic constitutive model for strain-rate sensitivity in high temperature fatigue
681
An improved unit decommitment algorithm for combined heat and power systems
682
An improved unsteady, unstructured, artificial compressibility, finite volume scheme for viscous incompressible flows: Part I. Theory and implementation
683
An improved unsteady, unstructured, artificial compressibility, finite volume scheme for viscous incompressible flows: Part II. Application
684
An improved UPLC method for the detection of undeclared horse meat addition by using myoglobin as molecular marker
685
An improved upper bound for Laplacian graph eigenvalues
686
An improved upper bound for queens domination numbers Original Research Article
687
An improved upper bound for Ramsey number N (3, 3, 3, 3; 2)
688
An improved upper bound for the bondage number of graphs on surfaces
689
An improved upper bound for the critical car density of the two-dimensional Biham–Middleton–Levine traffic model
690
An improved upper bound for the football pool problem for nine matches
691
An improved upper bound for the Laplacian spectral radius of graphs
692
An improved upper bound for the pebbling threshold of the n-path
693
An improved upper bound for the TSP in cubic 3-edge-connected graphs
694
An improved upper bound on the non-3-colourability threshold
695
An improved upper bound on the queuenumber of the hypercube
696
An Improved Upper Complexity Bound for the Topology Computation of a Real Algebraic Plane Curve
697
AN Improved UTD Based Model For The Multiple Building Diffraction Of Plane Waves In Urban Environments By Using Higher Order Diffraction Coeficients
698
An improved UV/Fe3+ process by combination with electrocatalysis for p-nitrophenol degradation
699
AN IMPROVED UWB NON-COPLANAR POWER DIVIDER
700
An improved value of the nuclear quadrupole moment of the 197 keV I = 52 excited state of 19F
701
An improved variational level set method for MR image segmentation and bias field correction
702
An improved variational method for finite element stress recovery and a posteriori error estimation Original Research Article
703
An improved vector particle swarm optimization for constrained optimization problems
704
AN IMPROVED VECTOR QUANTIZATION ENCODING ALGORITHM BASED ON TREE-HADAMARD TRANSFORMATION OF THE PROJECTION PYRAMID STRUCTURE
705
An improved version of drift-flux model for predicting pressure-gradient and void-fraction in vertical and near vertical slug flow
706
An improved version of ISICS: a program for calculating K-, L- and M-shell cross sections from PWBA and ECPSSR theory using a personal computer Original Research Article
707
An improved version of ISICS: A program for calculating K-, L- and M-shell cross sections from PWBA and ECPSSR theory using a personal computer Original Research Article
708
An improved version of RIGID for discrete element simulation of particle flows with arbitrarily complex geometries
709
An improved version of Taguchiʹs on-line control procedure
710
An improved version of the Greenʹs function molecular dynamics method Original Research Article
711
An improved version of the Marotto Theorem
712
An improved version of the Sharpless asymmetric dihydroxylation
713
An improved version of the singularity-induced bifurcation theorem
714
An Improved Version of the Visual Digital Signature Scheme
715
An improved vertex caching scheme for 3D mesh rendering
716
An improved vertical-axis water-current turbine incorporating a channelling device
717
An improved Vickers indentation fracture toughness model to assess the quality of thermally sprayed coatings
718
An improved viscosity model based on Peng–Robinson equation of state for light hydrocarbon liquids and gases
719
An improved viscosity model for CO2-crude system
720
An Improved Voice Activity Detection Using Higher Order Statistics
721
An improved void fraction model for two-phase cross-flow in horizontal tube bundles
722
An improved voltage control on large-scale power system
723
An improved voltage-collapse protection algorithm based on local phasors
724
An improved voting algorithm for planted (l, d) motif search
725
An Improved WAGNER-WHITIN Algorithm
726
An improved water use efficiency of cereals under temporal and spatial deficit irrigation in north China
727
An improved watershed algorithm based on efficient computation of shortest paths
728
An improved weighted average reactor temperature estimation for simulation of adiabatic industrial hydrotreaters
729
An improved weighted essentially non-oscillatory scheme for hyperbolic conservation laws
730
An improved weighted essentially non-oscillatory scheme with a new smoothness indicator
731
An improved weighting algorithm to achieve software compensation in a fine grained LAr calorimeter
732
An improved weighting algorithm to achieve software compensation in a fine grained LAr calorimeter
733
An improved weighting method with multibounds formulation and convex programming for multicriteria structural optimization
734
An improved wide-angle FD-BPM for nonlinear and nonreciprocal waveguides
735
An Improved Wide-band Noise Signal Analysis Method
736
An Improved W-LEACH Routing Protocol in Wireless Sensor Network
737
An improved WM method based on PSO for electric load forecasting
738
An improved X-ray detector for use at synchrotrons
739
An improved X-ray detector for use at synchrotrons
740
An improved ZCS-PWM commutation cell for IGBTʹs application
741
An improved zero-voltage and zero-current-switching full-bridge PWMconverter using a simple resonant circuit
742
An improved, efficient route to 2,2-difluoroethenylbenzenes
743
An improved, fully symmetric, finite-strain phenomenological constitutive model for shape memory alloys
744
An improved, inexpensive procedure for the large-scale purification of recombinant human erythropoietin
745
An improved, regioselective synthesis of the radiolabelling precursor for the translocator protein targeting positron emission tomography imaging radiotracer [18F]GE-180
746
An improved, simple, hydroponic method for growing Arabidopsis thaliana
747
An improvedmulti-objectiveevolutionaryalgorithmforthevehiclerouting problem withtimewindows
748
An Improvement for Efficiency Interval: Efficient and Inefficient Frontiers
749
An improvement for mewma in multivariate process control
750
An improvement for semantics-based recommender systems grounded on attaching temporal information to ontologies and user profiles
751
An improvement for semantics-based recommender systems grounded on attaching temporal information to ontologies and user profiles
752
An improvement for tensile instability in smoothed particle hydrodynamics
753
An improvement for the large sieve for square moduli Original Research Article
754
An improvement for the selection of surge arresters based on the evaluation of the failure probability
755
An Improvement in Cation Exchange Capacity Estimation and Water Saturation Calculation in Shaly Layers for One of Iranian Oil Fields
756
An improvement in DS-BiCGstab(l) and its application for linear systems in lattice QCD
757
AN IMPROVEMENT IN FLUOROCARBON CHAIN RE-ORIENTATION BY REACTIVE DYES
758
An improvement in integrating clustering method and neural network to extract rules and application in diagnosis support
759
An improvement in RTM method to image steep dip petroleum bearing structures and its superiority to other methods
760
An improvement in sintering property of β-tricalcium phosphate by addition of calcium pyrophosphate
761
An Improvement in Temporal Resolution of Seismic Data Using Logarithmic Time-frequency Transform Method
762
An improvement in the efficiency of olive pomace oil extraction using an optimal pooling decision model
763
An improvement in the immersion freezing process for frozen dough via ultrasound irradiation Original Research Article
764
An improvement in the modeling of the second derivative of displacement field in structural analysis
765
An improvement in the small-volume technique for determining thorium-234 in seawater
766
An Improvement in Thermal and Rheological Properties of Water-based Drilling Fluids Using Multiwall Carbon Nanotube (MWCNT)
767
An Improvement in WRP Block Replacement Policy with Reviewing and Solving its Problems
768
An improvement key deletion method for double-array structure using single-nodes
769
An Improvement Method for Reducing Power Amplifiers Memory Effects Based on Complex Gain Predistortion
770
An Improvement Method of Matrix Converter Drives Under Input Voltage Disturbances
771
An improvement of a dynamic cryptographic key assignment scheme in a tree hierarchy
772
An improvement of a recent closed graph theorem
773
An improvement of airflow and heat transfer performance of multi-coil condensers by different coil configurations
774
An improvement of algorithms for solving interface equations
775
An improvement of AUSM schemes by introducing the pressure-based weight functions
776
An improvement of cluster variation method entropy functional for bcc alloys
777
An improvement of convergence in Newtonʹs method Original Research Article
778
An improvement of cucumber cotyledon greening bioassay for cytokinins
779
An Improvement of Empirical Risk Functional in Neuro-Fuzzy Classifier
780
An improvement of HAGC response for CSC No.1 HSM
781
An improvement of Hardy Cross method applied on looped spatial natural gas distribution networks
782
An improvement of Ky Fan theorem for matrix eigenvalues
783
An Improvement of Liou et al.’s Authentication Scheme using Smart Cards
784
An improvement of matrix-assisted laser desorption/ionization mass spectrometry using an infrared tunable free electron laser
785
An improvement of matrix-assisted laser desorption/ionization mass spectrometry using an infrared tunable free electron laser
786
An improvement of Montel’s criterion
787
An improvement of neuro-fuzzy learning algorithm for tuning fuzzy rules
788
An Improvement of Physicomechanical Properties of Carbamazepine Crystals
789
An improvement of potato pulp protein hydrolyzation process by the combination of protease enzyme systems
790
An improvement of QFT plant template generation for systems with affinely dependent parametric uncertainties
791
An improvement of Rudin–Osher–Fatemi model
792
An Improvement of Shuffled Frog Leaping Algorithm with a Decision Tree for Feature Selection in Text Document Classification
793
An Improvement of Steerable Pyramid Denoising Method
794
An improvement of the Aho-Corasick machine
795
An improvement of the Arzela–Ascoli theorem
796
An Improvement of the Boshier-Nomura Bound
797
An Improvement of the Conditions (A1), (A2), (B1), and (B2) in the Paper "Pointwise Convergence of Double Trigonometric Series" by Chang-Pao Chen and Po-Hsun Hsieh
798
An Improvement of the Constants in a Reverse Integral Inequality
799
An improvement of the CTTC model for predicting urban air temperatures
800
An improvement of the design method of cellular neural networks based on generalized eigenvalue minimization
801
An improvement of the detection efficiency of a solid state UCN detector with a 6Li/Ti multilayer neutron converter working at liquid helium temperature
802
An improvement of the detection efficiency of a solid state UCN detector with a 6Li/Ti multilayer neutron converter working at liquid helium temperature
803
An improvement of the Dulmage-Mendelsohn theorem
804
An improvement of the EDI method in linear elastic fracture mechanics by means of an a posteriori error estimator in G
805
An improvement of the Euler–Chebyshev iterative method
806
An improvement of the Feng–Rao bound on minimum distance
807
An improvement of the finite-element method for computing the electric field of waveguides with complex geometry
808
AN IMPROVEMENT OF THE GE-ESSELLEʹS METHOD FOR THE EVALUATION OF THE GREENʹS FUNCTIONS IN THE SHIELDED MULTILAYERED STRUCTURES
809
An improvement of the GPH estimator
810
An improvement of the hydrogen permeability of C/Al2O3 membranes by palladium deposition into the pores
811
An improvement of the Lagrangean relaxation approach for job shop scheduling: a dynamic programming method
812
An improvement of the macroscopic compressibility approximation
813
An improvement of the NEC criterion for assessing the number of clusters in a mixture model
814
An improvement of the NEC criterion for assessing the number of clusters in a mixture model
815
An improvement of the Nevanlinna–Gundersen theorem
816
An improvement of the response surface method
817
AN IMPROVEMENT OF THE TIME DELAYED QUASI-STEADY MODEL FOR THE OSCILLATIONS OF CIRCULAR CYLINDERS IN CROSS-FLOW
818
An improvement of the tree code construction
819
An improvement of the two-line algorithm for proving q-hypergeometric identities Original Research Article
820
An improvement of the two-stream model for vertical mixing of passive tracer in the convective boundary layer
821
An Improvement of the Upper Bound on the Entropy of Information Sources
822
An improvement of thermal conductivity of underfill materials for flip-chip packages
823
An improvement of thermodynamic micellization model for prediction of asphaltene precipitation during gas injection in heavy crude
824
An improvement of uncertainty in activity standardization with efficiency tracer technique
825
An improvement of viswanathan and bagchiʹs exact algorithm for constrained two-dimensional cutting stock
826
An improvement on "Delay and its time-derivative dependent robust stability of time-delayed linear systems with uncertainty"
827
An improvement on AC ionisers to minimise the offset voltage
828
An Improvement on Collocation Algorithm to Solve Initial Value Problems
829
An improvement on cycling stability of Ti–V–Fe-based hydrogen storage alloys with Co substitution for Ni
830
An improvement on El-Yaniv-Fiat-Karp-Turpinʹs money-making bi-directional trading strategy
831
An improvement on Ky Fanʹs theorem of matrix eigenvalues Original Research Article
832
An Improvement on Land Surface Temperature Determination by Producing Surface Emissivity Maps
833
An improvement on multivariable PID controller design via iterative LMI approach
834
An improvement on parallel computation of a maximal matching
835
An improvement on redox reversibility of cobalt oxyhydroxide in nickel hydroxide electrodes
836
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding
837
An improvement on sol-gel method for preparing ultrafine and crystallized titania powder
838
An improvement on sol-gel method for preparing ultrafine and crystallized titania powder
839
An Improvement on Stable Adaptive Control for a Class of Nonlinear Systems
840
An Improvement on STEM Method in Multi-Criteria Analysis
841
An Improvement on the Base-Change Theorem and the Functor f^!
842
An improvement on the complexity of factoring read-once Boolean functions Original Research Article
843
An improvement on the discrepancy in the implementation of modus ponens
844
An improvement on the Exp-function method when balancing the highest order linear and nonlinear terms
845
An improvement on the laddertron in Beijing HI-13
846
An improvement on the laddertron in Beijing HI-13
847
An Improvement on the Mean Value Formula for the Approximate Functional Equation of the Square of the Riemann Zeta-Function Original Research Article
848
An improvement on the numerical simulation of CME event between two coronal streamers
849
An improvement on the perturbation of the group inverse and oblique projection Original Research Article
850
An improvement on the positivity results for 2-stage explicit Runge–Kutta methods
851
An improvement on the power law for the description of particle size distributions in potable water treatment
852
An Improvement on the Prediction of Optical Constants and Radiative Properties by Introducing an Expression for the Damping Frequency in Drude Model
853
an improvement on the topological map matching algorithm at junctions: a heuristic approach
854
An improvement on the transient response of tracking for the sampled-data system based on an improved PD-type iterative learning control
855
An improvement on variational boundary element formulation for elasticity with body forces
856
An Improvement Over Lee et al.’s Key Agreement Protocol
857
An Improvement over Random Early Detection Algorithm: A Self-Tuning Approach
858
An Improvement over Random Early Detection Algorithm: A Self-Tuning Approach
859
An improvement project for distribution transformer load management in Taiwan
860
An improvement technique for the efficiency of high-frequency switch-mode rectifiers
861
An improvement to Darboux integrability theorem for systems having a center Original Research Article
862
An improvement to frequency-domain regression method for calculating conduction transfer functions of building walls
863
An improvement to homotopy perturbation method for solving system of linear equations
864
An improvement to MLR model for predicting liquefaction-induced lateral spread using multivariate adaptive regression splines
865
An Improvement to MODIS TPW Products by Damping the Variation of Surface Reflectance in Channel 2
866
An improvement to multiple criteria ABC inventory classification
867
An improvement to multiple description transform coding
868
An Improvement to Pedestrian’s Mobility by rehabilitating the Sidewalk with Application of AHP (Case Study)
869
AN IMPROVEMENT TO PHYSICAL PROPERTIES OF HEAVY-WEIGHT OIL WELL CEMENTS USING CARBON NANOTUBES
870
an improvement to physical properties of heavy-weight oil well cements using carbon nanotubes
871
An Improvement to Ray Casting: A Model Based Approach
872
AN IMPROVEMENT TO THE ANTICORROSIVE PROPERTIES OF EPOXY POWDER COATING BY ZINC PHOSPHATE AND ZINC ALUMINUM PHOSPHATE PIGMENTS
873
An improvement to the diffraction-enhanced imaging method that permits imaging of dynamic systems
874
An improvement to the diffraction-enhanced imaging method that permits imaging of dynamic systems
875
An improvement to the DR clustering algorithm
876
An improvement to the full-foil mapping technique for high accuracy measurement of X-ray mass attenuation coefficients
877
An improvement to the full-foil mapping technique for high accuracy measurement of X-ray mass attenuation coefficients
878
An improvement to the homotopy perturbation method for solving integro differential equations
879
An improvement to the interacting multiple model (IMM) algorithm
880
An improvement to the methods for estimating the statistical dependencies of the parameters of random load states
881
An improvement to the volcano-scan algorithm for atmospheric correction of CRISM and OMEGA spectral data
882
An improving dynamic programming algorithm to solve the shortest path problem with time windows
883
An improving method for determination of Escherichia coli population based on multi-channel series piezoelectric quartz crystal system
884
An improvised technique of quintic hermite splines to discretize generalized Burgers–Huxley type equations
885
An Impulse Based Substructuring approach for impact analysis and load case simulations
886
An Impulse Based Substructuring method for coupling impulse response functions and finite element models
887
An impulse control of a geometric Brownian motion with quadratic costs
888
An impulse control problem of a production model with interruptions to follow stochastic demand
889
AN IMPULSE SAMPLING APPROACH FOR EFFICIENT 3D TLM-BASED ADJOINT SENSITIVITY ANALYSIS
890
An impulse voltage calibrator of low output impedance
891
An impulse-based energy tracking method for collision resolution
892
AN IMPULSE-RADIO-BASED ULTRAWIDEBAND RF FRONT-END MODULE WITH A NEW MULTILAYERED MICROWAVE SAMPLER
893
An impulse-response function for a vector autoregression with multivariate GARCH-in-mean
894
An impulse-time perturbation approach for enhancing the robustness of extra-insensitive input shapers
895
An impulse-to-impulse discrete-time mapping for a time-delay impulsive system
896
An impulsive noise color image filter using learning-based color morphological operations
897
An impulsive noise reduction agent for rigid body motion data using B-spline wavelets
898
An impulsive predator–prey model with disease in the prey for integrated pest management
899
An impulsive predator–prey system with modified Leslie–Gower and Holling type II schemes
900
An impulsive ratio-dependent predator–prey system with diffusion
901
An impulsive receptance technique for the time domain computation of the vibration of a whole aero-engine model with nonlinear bearings
902
An impulsive stimulated scattering study of surface acoustic waves under high pressure
903
An IMT-type quadrature formula with the same asymptotic performance as the DE formula
904
An in depth analysis of the pivotal social factors of higher educational marketing in Tehran IAUs
905
An in depth study of the formation of new tetrathiafulvalene derivatives from 1,8-diketones
906
An in line non-invasive optical system to monitor pH in cell and tissue culture
907
An in planta technique for cis-/trans-stereochemical analysis of jasmonoyl isoleucine
908
An in silico approach to design peptide mimetics based on docking and molecular dynamics simulation of EGFR–matuzumab complex
909
An in Silico Approach to Find the Molecular Targets and Potential Candidates for SARS-CoV-2
910
An In silico Based Comparison of Drug Interactions in Wild and Mutant Human β-tubulin through Docking Studies
911
An In silico Chimeric Vaccine Targeting Breast Cancer Containing Inherent Adjuvant
912
An In silico Chimeric Vaccine Targeting Breast Cancer Containing Inherent Adjuvant
913
An in silico Design, Expression and Purification of a Chimeric Protein as an Immunogen Candidate Consisting of IpaD, StxB, and TolC Proteins from Shigella spp.
914
An in silico Exploration of the Neutral Network in Protein Sequence Space
915
An in silico investigation into the causes of telomere length heterogeneity and its implications for the Hayflick limit
916
An in silico model to predict the potential of dietary proteins as sources of dipeptidyl peptidase IV (DPP-IV) inhibitory peptides
917
An in silico re-design of the metabolism in Thermotoga maritima for increased biohydrogen production
918
An in silico skin absorption model for fragrance materials
919
An in silico study of the protonated DNA triplex: In vivo stability of C+GC in a DNA triple helix
920
An In Silico Study of Transforming Growth Factor-β Inhibitors: A Potential Target for Diabetic Nephropathy Treatment with Active Compounds from the Active Fraction of Physalis angulata
921
An in silico study on the ring-size effect in ring enlargement Bellus-Claisen rearrangement
922
An in silico virtual screening study for the design of norovirus inhibitors: fragment-based molecular docking and binding free energy calculations
923
An in situ (W,Ti)C–Ni composite fabricated by SHS method
924
An in situ approach to prepare nanorods of titania–hydroxyapatite (TiO2–HAp) nanocomposite by microwave hydrothermal technique
925
An in situ approach to synthesize pure phase FAU-type zeolite membranes: effect of aging and formation mechanism
926
An in situ ATR-FTIR investigation of adsorption and orientation of heptyl xanthate at the lead sulphide/aqueous solution interface
927
An in situ ATR-FTIR study of the adsorption kinetics of xanthate on germanium
928
An in situ benzoylation-dispersive liquid–liquid microextraction method based on solidification of floating organic droplets for determination of biogenic amines by liquid chromatography–ultraviolet analysis
929
An in situ bioassay for freshwater environments with the microalga Pseudokirchneriella subcapitata
930
An in situ bulk Zr58Al9Ni9Cu14Nb10 quasicrystal-glass composite with superior room temperature mechanical properties
931
An in situ calibration of an ultrasound transducer: : a potential application for an ultrasonic indentation test of articular cartilage
932
An in situ caries study on the interplay between fluoride dose and concentration in milk
933
An in situ caries study on the interplay between fluoride dose and concentration in milk
934
An in situ composite of Al (graphite, Al4C3) produced by reciprocating extrusion
935
An in situ composite of Al (graphite, Al4C3) produced by reciprocating extrusion
936
An in situ coupling separation process of electro-electrodialysis with back-extraction
937
An in situ cross-linking hybrid hydrogel for controlled release of proteins
938
An in situ DRIFTS study of efficient lean NOx reduction with H2 + CO over Pd/Al2O3: the key role of transient NCO formation in the subsequent generation of ammonia
939
An in situ electrochemical quartz crystal microbalance study of polycrystalline gold electrodes in nitric acid solution
940
An in situ ESR study on poly(3-methylthiophene): charge transport due to polarons and bipolarons before the evolution of metallic conduction
941
An in situ fabrication process for highly electrical conductive polyimide/MWCNT composite films using 2,6-diaminoanthraquinone
942
An in situ filtration system for trace element determination in suspended particulate matter Original Research Article
943
An in situ formed biodegradable hydrogel for reconstruction of the corneal endothelium
944
An in situ forming biodegradable hydrogel-based embolic agent for interventional therapies
945
An in situ forming collagen–PEG hydrogel for tissue regeneration
946
An in situ forming gelatin-based hydrogel loaded with soluble amniotic membrane promotes full-thickness wound regeneration in rats
947
An in situ Fourier transform infrared study on the mechanism of NO reduction by acetylene over mordenite-based catalysts
948
An in situ FTIR study of galena and pyrite oxidation in aqueous solution
949
An in situ FT-IR study of photo-oxidation of alcohols over uranyl-anchored MCM-41: Possible reaction pathways
950
An in situ generated CuI/metformin complex as a novel and efficient catalyst for C–N and C–O cross-coupling reactions
951
An in situ generated samarium complex as a practical catalyst for the efficient intramolecular hydroamination of non-activated alkenes
952
An in situ high pressure FTIR study on molecular interactions of ketones, esters, and amides with dense phase carbon dioxide
953
An in situ high pressure-high temperature powder diffraction study of the formation of a precursor phase of bismuth manganite
954
An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels Original Research Article
955
An in situ high-energy X-ray diffraction study of micromechanical behavior of Zr-based metallic glass reinforced porous W matrix composite
956
An in situ hydrothermal fabrication process of poly(vinyl alcohol)/apatite-like nanocomposites with improved thermal and mechanical properties
957
An in situ immobilized pipette tip solid phase microextraction method based on molecularly imprinted polymer monolith for the selective determination of difenoconazole in tap water and grape juice
958
An in situ infrared spectroscopic study of ligand adsorption from aqueous solutions to cadmium telluride particle films
959
An in Situ Infrared Study of Dimethyl Carbonate Synthesis from Carbon Dioxide and Methanol over Zirconia
960
An in situ iron-enrichment experiment in the western subarctic Pacific (SEEDS): Introduction and summary
961
An in situ laser induced breakdown spectroscope (LIBS) for Chandrayaan-2 rover: Ablation kinetics and emissivity estimations Original Research Article
962
An in situ matrix functionalization approach to structure stability enhancement in polyethylene/montmorillonite nanocomposites prepared by intercalative polymerization
963
An in situ mechanism for self-replenishing powder transfer films: Experiments and modeling
964
An in situ method for translation of acid sludge to modified asphalt paving materials
965
An in situ method to measure the longitudinal and transverse dispersion coefficients of solute transport in soil
966
An in situ methylation of toluene using syngas over bifunctional mixture of Cr2O3/ZnO and HZSM-5 Original Research Article
967
An in situ microscopic spectroelectrochemical study of a three-phase electrode where an ion transfer at the water|nitrobenzene interface is coupled to an electron transfer at the interface ITO|nitrobenzene
968
An in situ neutron diffraction study of shape setting shape memory NiTi Original Research Article
969
An in situ optical gas phase analysis approach for TGA: Its assessment and application
970
An in situ oxidation route to fabricate graphene nanoplate–metal oxide composites
971
An in situ photoemission study of the dehydrogenation reaction of methanol on Ni(1 0 0)
972
An in situ postexposure feeding assay with Carcinus maenas for estuarine sediment-overlying water toxicity evaluations
973
An in situ quick-EXAFS and redox potential study of the Fe(II)-catalysed transformation of ferrihydrite
974
An in situ Raman spectroelectrochemical study of the controlled doping of semiconducting single walled carbon nanotubes in a conducting polymer matrix
975
An in situ Raman spectroelectrochemical study of the controlled doping of single walled carbon nanotubes in a conducting polymer matrix Original Research Article
976
An in situ Raman spectroscopic study of pressure induced dissociation of spinel NiCr2O4 Original Research Article
977
An in situ reduction approach for bio-oil hydroprocessing
978
An in situ reduction method for preparing silver/poly(vinyl alcohol) nanocomposite as surface-enhanced Raman scattering (SERS)-active substrates
979
An in Situ Respirometric Technique to Measure Pollution-Induced Microbial Community Tolerance in Soils Contaminated with 2,4,6-Trinitrotoluene
980
An in situ SERS investigation of the chemical states of sulfur species adsorbed onto Pt from different sulfur sources
981
An in situ SFG and SERS investigation into the electrodeposition of Au from and solutions
982
An in situ small angle neutron scattering study of expanded graphite under a uniaxial stress Original Research Article
983
An in situ spectrochemical study of the reduction of thin fullerene films
984
An in situ study investigating dentine tubule occlusion of dentifrices following acid challenge
985
An in situ study investigating dentine tubule occlusion of dentifrices following acid challenge
986
An in situ study of hardening and softening of iron by carbon interstitials Original Research Article
987
An in situ study of inorganic nitrogen flow under different fertilization treatments on a wheat–maize rotation system surrounding Nansi Lake, China
988
An in Situ Study of Metal Complexation by an Immobilized Synthetic Biopolymer Using Tapping Mode Liquid Cell Atomic Force Microscopy
989
An in situ study of protein adsorption on combinatorial Cu–Al films using spectroscopic ellipsometry
990
An in situ study of the effect of nitrate on the reduction of trichloroethylene by granular iron
991
An in situ study of the formation of multiferroic bismuth ferrite using high resolution synchrotron X-ray powder diffraction
992
An in situ study of the martensitic transformation in shape memory alloys using photoemission electron microscopy
993
An in situ study of the NO + H2 + O2 reaction on Pd/LaCoO3 based catalysts
994
An in situ study of the role of surface films on granular iron in the permeable iron wall technology
995
An in situ study on austenite memory and austenitic spontaneous recrystallization of a martensitic steel
996
An in situ surface composite produced by electromagnetic force
997
An in situ synchrotron energy-dispersive diffraction study of the hydration of oilwell cement systems under high temperature/autoclave conditions up to 130 °C
998
An in situ synchrotron X-ray diffraction study of precipitation kinetics in a severely deformed Cu–Ni–Si alloy
999
An in situ synthesis of cyanogen chloride as a safe and economical aqueous standard
1000
An in situ technique for analyzing ionomer coverage in catalyst layers
