بر اساس عنوان

1
Development of nickel/metal-hydride batteries for EVs and HEVs
2
Development of nickel–iron bimetallic catalytic layer for solid oxide fuel cells: Effect of citric acid
3
Development of nickel–phosphorus coatings containing micro particles of talc phyllosilicates
4
Development of Ni–Cu–Mg–Al catalysts for the synthesis of carbon nanofibers by catalytic decomposition of methane
5
Development of Ni–Fe bimetallic based catalysts for biomass tar cracking/reforming: Effects of catalyst support and co-fed reactants on tar conversion characteristics
6
Development of NiFe-CNT and Ni3Fe-CNT nanocomposites by mechanical alloying
7
Development of n-in-p silicon planar pixel sensors and flip-chip modules for very high radiation environments
8
Development of n-in-p silicon planar pixel sensors and flip-chip modules for very high radiation environments
9
Development of niobium containing acidic catalysts for glycerol esterification
10
Development of NiO-Co3O4 nano-ceramic composite materials as novel photocatalysts to degrade organic contaminants present in water
11
Development of Ni-P Alloy Coatings for Better Corrosion Protection Using Glycerol as Additive
12
Development of Nipa palm fibers for textiles
13
Development of Ni-Pd bimetallic catalysts for the utilization of carbon dioxide and methane by dry reforming Original Research Article
14
Development of Ni-Ti-B ternary catalysts for NaBH4 hydrolysis reaction and evaluation of their catalytic activities
15
Development of nitric oxide and nitric oxide synthase as ecotoxicological biomarkers in the tropical marine environment
16
Development of nitric oxide sensor for asthma attack prevention
17
Development of nitride-layer of AISI 304 austenitic stainless steel during high-temperature ammonia gas-nitriding
18
Development of nitrification hot-spots around degrading red clover (Trifolium pratense) leaves in soil
19
Development of nitrification inhibition assays using pure cultures of nitrosomonas and nitrobacter
20
Development of nitrile butadiene rubber–nanoclay composites with epoxidized natural rubber as compatibilizer
21
Development of nitrogen-blowing salt-induced solidified floating organic droplet microextraction for determination of phenolic oestrogens in milk samples
22
Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials—review
23
Development of NO sorbents tolerant to sulfur oxides
24
Development of no valve solar ice maker
25
Development of NO2 and NOx land use regression models for estimating air pollution exposure in 36 study areas in Europe – The ESCAPE project
26
Development of nomogram for performance prediction of integrated collector-storage(ICS) solar water heating systems
27
Development of Nomogram to Predict the Best Military Category Using Physical Fitness Variables: A Model Development in Navy Trainees
28
Development of nomograms for prediction of extrusion stress for P/M copper preforms at warm working temperatures
29
Development of non polynomial spline and New B-spline with application to solution of Klein-Gordon equation
30
Development of non-deform micro-encapsulated phase change energy storage tablets
31
Development of non-destructive evaluation methods for degradation of HTGR graphite components
32
Development of nondestructive inspection techniques for measurement of void swelling in irradiated microscopy disks
33
DEVELOPMENT OF NON-DESTRUCTIVE MONITORING SYSTEM FOR CHLORIDE PENETRATION INTO REINFORCED CONCRETE STRUCTURES
34
Development of Nondestructive Screening Methods for Single Kernel Characterization of Wheat.
35
Development of non-destructive Youngʹs modulus measurement techniques in non-oriented CeF3 crystals
36
Development of non-destructive Youngʹs modulus measurement techniques in non-oriented CeF3 crystals
37
Development of non-destructive, non-contact single-cell based differential cell assay using on-chip microcultivation and optical tweezers
38
Development of Nonfertile and Evolutionary Mixed-Oxide Nuclear Fuels for Use in Existing Water Reactors
39
Development of non-flammable lithium secondary battery with room-temperature ionic liquid electrolyte: Performance of electroplated Al film negative electrode
40
Development of non-isothermal TGA–DSC for kinetics analysis of low temperature coal oxidation prior to ignition
41
Development of non-iterative self correcting solution (NONSS) method for the viscoplastic analysis with the Chaboche model
42
Development of non-keyboard input device checklists through assessments
43
Development of nonlinear analytical model and seismic analyses of a steel frame with self-centering devices and viscoelastic dampers
44
Development of nonlinear elastic leaf spring model for multibody vehicle systems Original Research Article
45
Development of Nonlinear Lattice-Hammerstein Filters for Gaussian Signals
46
Development of Nonlinear Transfer Matrix Method for Inelastic Analyses of Beams
47
Development of nonlinear weighted compact schemes with increasingly higher order accuracy
48
Development of non-perfluorinated hybrid materials for single-cell proton exchange membrane fuel cells
49
Development of nonproprietary phosphine ligands for the Pd-catalyzed amination reaction
50
Development of Non-Quenched Prehardened Steel for Large Section Plastic Mould Original Research Article
51
Development of non-standard arginine residue parameters for use with the AMBER force fields
52
Development of non-symmetric thiophene-fused BODIPYs
53
Development of norm for Adolescent Physical Literacy Questionnaire (APLQ) in Tehran
54
Development of normal phase-high performance liquid chromatography-atmospherical pressure chemical ionization-mass spectrometry method for the study of 6,6′-bis-(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo[1,2,4]-triazin-3-yl)-[2,2′]-bipyridine hydrolyti
55
Development of normal pressure and frictional traction along the walls of a steep conical hopper during filling
56
Development of normalization factors for Canada and the United States and comparison with European factors Original Research Article
57
Development of novel 19F NMR pH indicators: synthesis and evaluation of a series of fluorinated vitamin B6 analogues Original Research Article
58
Development of novel 2-[4-(aminoalkoxy)phenyl]-4(3H)-quinazolinone derivatives as potent and selective histamine H3 receptor inverse agonists
59
Development of novel active coating from Sagez and Sagez-zein to increase the shelf life of sweet lemon (Citrus limetta)
60
Development of novel adaptive single-pole autoreclosure schemes for extra high voltage transmission systems using wavelet transform analysis
61
Development of Novel Adhesive Bilayer Lyophilized Wafer of Moxifloxacin as a Modern Wound Dressing
62
Development of novel agar media for isolating guaiacol producing Alicyclobacillus spp.
63
Development of novel aligned nanofibrous composite membranes for guided bone regeneration
64
Development of novel amphiphilic magnetic molecularly imprinted polymers compatible with biological fluids for solid phase extraction and physicochemical behavior study
65
Development of novel and efficient synthesis of group 14 element (Ge and Sn) catenates by use of samarium (II) diiodide
66
Development of novel and sensitive methods for the determination of sulfide in aqueous samples by hydrogen sulfide generation-inductively coupled plasma-atomic emission spectroscopy Original Research Article
67
Development of novel antibacterial gel using clove and calendula extracts with colloidal silver nanoparticles
68
Development of Novel Antimicrobial Agents: Emerging Strategies: Editor: Karl Lohner. Horizon Scientific Press, Norfolk England, 2001; hard back, xi+284 pp.; ISBN: 1-898486-23-9; £84.99. Website:
69
Development of novel asymmetric ultra low pressure membranes and a preliminary study for bacteria and pathogen removal applications Original Research Article
70
Development of novel backwash cleaning technique for reverse osmosis in reclamation of secondary effluent
71
Development of Novel Binder for Hardmetal Powder Extrusion Molding
72
Development of novel bioactive composites by electrophoretic deposition
73
Development of novel biodegradable Au nanocomposite hydrogels based on wheat: For inactivation of bacteria
74
Development of novel blocked diisocyanate crosslinked chitosan membranes for pervaporation separation of water–isopropanol mixtures
75
Development of novel budesonide pellets based on CODESTM technology: In vitro/in vivo evaluation in induced colitis in rats
76
Development of novel carbon bonded filter compositions for steel melt filtration
77
Development of novel cell-permeable DNA sensitive dyes using combinatorial synthesis and cell-based screening
78
Development of novel chromium oxide/metallocene hybrid catalysts for bimodal polyethylene
79
Development of novel clutch utilizing self-locking mechanisms of belt
80
Development of Novel Continuous and Interval Exercise Programs by Applying the FITT-VP Principle in Dogs
81
Development of novel control strategy for multiple circuit, roof top bus air conditioning system in hot humid countries
82
Development of novel correlation for prediction of hydrate formation temperature based on intelligent optimization algorithms
83
Development of novel crosslinkable polymers for second-order nonlinear optical devices
84
Development of novel dental nanocomposites reinforced with polyhedral oligomeric silsesquioxane (POSS)
85
Development of novel detection reagent for simple and sensitive determination of trace amounts of formaldehyde and its application to flow injection spectrophotometric analysis Original Research Article
86
Development of novel diclofenac potassium controlled release tablets by wet granulation technique and the effect of co-excipients on in vitro drug release rates
87
Development of Novel Dimensionless Parameters for Accurate Estimation of Properties in Fluidized Beds
88
Development of novel electrospun nanofibrous scaffold from P. ricini and A. mylitta silk fibroin blend with improved surface and biological properties
89
Development of novel fiber-packed needle interface for off-line reversed-phase liquid chromatography–capillary gas chromatography
90
Development of novel glass-based composite seals for planar intermediate temperature solid oxide fuel cells
91
Development of novel grafted hybrid PVA membranes using glycidyltrimethylammonium chloride for pervaporation separation of water–isopropanol mixtures
92
Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy Original Research Article
93
Development of novel highly active and sulphur-tolerant catalysts for steam reforming of liquid hydrocarbons to produce hydrogen Original Research Article
94
Development of novel hydrogels by functionalization of sterculia gum for use in anti-ulcer drug delivery
95
Development of novel hydrogels by functionalization of sterculia gum for use in anti-ulcer drug delivery
96
Development of novel inexpensive adsorbents from waste concrete to mitigate NOx emissions
97
Development of novel Lewis acid catalyzed cycloisomerizations: synthesis of bicyclo[3.1.0]hexenes and cyclopentenones
98
Development of novel lipid–peptide hybrid compounds with antibacterial activity from natural cationic antibacterial peptides
99
Development of novel low temperature and low pressure ammonia synthesis catalyst Original Research Article
100
Development of novel LpxC inhibitors: chiral-pool synthesis of C-triazolyl glycosides
101
Development of novel magnetic nano-carriers for high-performance affinity purification
102
Development of novel membranes for PV separation of water–isopropanol mixtures using poly(vinyl alcohol) and gelatin
103
Development of novel method for measuring optical activity of solids and its applications
104
Development of novel method of non-viral efficient gene transfer into neonatal cardiac myocytes
105
Development of novel Mg–Ni60Nb40 amorphous particle reinforced composites with enhanced hardness and compressive response
106
Development of novel MnO2/nanoporous carbon composite electrodes in capacitive deionization technology Original Research Article
107
Development of novel molecularly imprinted magnetic solid-phase extraction materials based on magnetic carbon nanotubes and their application for the determination of gatifloxacin in serum samples coupled with high performance liquid chromatography
108
Development of novel molecularly imprinted solid-phase microextraction fiber and its application for the determination of triazines in complicated samples coupled with high-performance liquid chromatography
109
Development of novel mordenite-filled chitosan–poly(acrylic acid) polyelectrolyte complex membranes for pervaporation dehydration of ethylene glycol aqueous solution
110
Development of novel multilayer materials for impact applications: A combined numerical and experimental approach
111
Development of novel n+-in-p Silicon Planar Pixel Sensors for HL-LHC
112
Development of novel n+-in-p Silicon Planar Pixel Sensors for HL-LHC
113
Development of novel nano-biocomposite antioxidant films based on poly (lactic acid) and thymol for active packaging
114
Development of novel nanoparticles shelled with heparin for berberine delivery to treat Helicobacter pylori
115
Development of novel oil washing process using bubble potential energy
116
Development of novel on-chip, customer-design spiral biasing adaptor on for Si drift detectors and detector arrays for X-ray and nuclear physics experiments
117
Development of novel on-chip, customer-design spiral biasing adaptor on for Si drift detectors and detector arrays for X-ray and nuclear physics experiments
118
Development of novel optical waveguide surface plasmon resonance (SPR) sensor with dual light emitting diodes
119
Development of Novel Palm Resin – Poly(Acrylamide) Based Hydrogel Silver Nanocomposite for Antibacterial Activity
120
Development of novel pervaporation membranes for the separation of water–isopropanol mixtures using sodium alginate and NaY zeolite
121
Development of novel photon detectors at UC Davis
122
Development of novel photon detectors at UC Davis
123
Development of novel polymer/quasicrystal composite materials
124
Development of novel polymer/quasicrystal composite materials
125
Development of novel polymer-type dehydrocondensing reagents comprised of chlorotriazines
126
Development of Novel Polymorphic EST-SSR Markers from the Cranberry Fruit Transcriptome
127
Development of novel porous radiant burners for LPG cooking applications
128
Development of Novel Potentiometric Sensors for Determination of Lidocaine Hydrochloride in Pharmaceutical Preparations, Serum and Urine Samples
129
Development of novel potentiometric sensors for determination of tartrazine dye concentration in foodstuff products
130
Development of novel process for Ru CMP using ceric ammonium nitrate (CAN)-containing nitric acid
131
Development of novel processable electron accepting conjugated polymers containing fluoranthene units in the main chain
132
Development of Novel Protocol to Al3+ Stress Tolerance at Germination Stage in Indica Rice through Statistical Approaches
133
Development of novel pyrrole synthesis for the preparation of intermediates of bioactive pyrrole alkaloids
134
Development of novel radiation-resistant insulation systems for fusion magnets
135
Development of novel rare earth doped fluoride and oxide scintillators for two-dimensional imaging
136
Development of novel reactions using ruthenium carbene catalyst and its application to novel methods for preparing nitrogen-containing heterocycles
137
Development of novel red phosphorescent iridium complex with phenyl-isoquinoline ligand for organic electroluminescent device
138
Development of novel red phosphorescent iridium complex with phenyl-isoquinoline ligand for organic electroluminescent device
139
Development of novel renewable energy based hydrogen production systems: A comparative study
140
Development of novel Ru catalyst of preferential CO oxidation for residential polymer electrolyte fuel cell systems
141
Development of novel self-humidifying composite membranes for fuel cells
142
Development of novel SiO2–GO nanohybrid/polysulfone membrane with enhanced performance
143
Development of novel sorbents for mercury control at elevated temperatures in coal-derived syngas: results of initial screening of candidate materials
144
Development of novel supported iridium nanocatalysts for special catalytic beds
145
Development of novel surface modified phase inversion membranes having hydrophobic surface-modifying macromolecule (nSMM) for vacuum membrane distillation Original Research Article
146
Development of novel surfactant-templated nanostructured thin SiO2, and SiO2–TiO2 films
147
Development of novel tail-modified anandamide analogs
148
Development of novel telomerase inhibitors based on a Bisindole unit
149
Development of novel ternary tellurite glasses for high temperature fiber optic mid-IR chemical sensing
150
Development of novel therapeutic strategy by regulating the nuclear hormone receptors
151
Development of novel titanium nitride-based decorative coatings by calcium addition
152
Development of Novel Topical Cosmeceutical Formulations from Nigella sativa L. with Antimicrobial Activity against Acne-Causing Microorganisms
153
Development of novel tribo composites with TiNi shape memory alloy matrix
154
Development of novel tungsten processing technologies for electro-chemical machining (ECM) of plasma facing components
155
Development of novel ultrasonic transducers for microelectronics packaging
156
Development of novel ultrathin structures based in amaranth (Amaranthus hypochondriacus) protein isolate through electrospinning
157
Development of novel water-soluble photocleavable protective group and its application for design of photoresponsive paclitaxel prodrugs Original Research Article
158
Development of novel wear-resistant materials: TiNi-based pseudoelastic tribomaterials
159
Development of novel α-chitin/nanobioactive glass ceramic composite scaffolds for tissue engineering applications
160
Development of novel α-chitin/nanobioactive glass ceramic composite scaffolds for tissue engineering applications
161
Development of novel β-amyloid probes based on 3,5-diphenyl-1,2,4-oxadiazole Original Research Article
162
Development of No-Vent™ liquid hydrogen storage system for space applications Original Research Article
163
Development of NOx sensing devices based on YSZ and oxide electrode aiming for monitoring car exhausts
164
Development of NSTX particle control techniques
165
Development of nuclear emulsions with spatial resolution for the AEgIS experiment
166
Development of nuclear emulsions with spatial resolution for the AEgIS experiment
167
Development of nuclear spectroscopy systems using high resolution semiconductor detector
168
Development of nuclear spectroscopy systems using high resolution semiconductor detector
169
Development of Numerical Eulerian-Eulerian Model forComputational Analysis of Potential in Chemical ProcessIntensification from Trickle Bed Reactors
170
Development of numerical model for FEM computation of oxygen transport through porous media coupled with micro-cell corrosion model of steel in concrete structures
171
Development of numerical scheme for phase field crystal deformation simulation
172
Development of numerical simulation code of membrane reactor for detritiation
173
Development of numerical simulation tools in the Euratom Framework Programmes
174
Development of nutrient rich noodles by supplementation with malted ragi flour
175
Development of obesity and neurochemical backing in aurothioglucose-treated mice
176
Development of obstructive hydrocephalus with lumboperitoneal shunting following subarachnoid hemorrhage
177
Development of obstructive hypertrophic cardiomyopathy from nonobstructive hypertrophic cardiomyopathy
178
Development of Occupational Resilience Beliefs Scale for Teacher Candidates
179
Development of Oculimacula yallundae and O. acuformis (eyespot) on leaf sheaths of winter wheat in the UK in relation to thermal time
180
Development of odor recorder with enhanced recording capabilities based on real-time mass spectrometry
181
Development of off-line layer chromatographic and total reflection X-ray fluorescence spectrometric methods for arsenic speciation
182
Development of offset channels across the San Andreas fault
183
Development of offshore wind power in China
184
Development of O–H insertion for the attachment of phosphonates to nucleosides; synthesis of α-carboxy phosphononucleosides
185
Development of oil Approaches Influenced by Effective Factors for Success of Economy-Based Entrepreneurship: A Case Study of the oil Industry
186
Development of oil formation theories and their importance for peak oil
187
Development of oil hydrocarbon fingerprinting and identification techniques
188
Development of olefin metathesis catalyst precursors bearing nucleophilic carbene ligands
189
Development of oligoarginine–drug conjugates linked to new peptidic self-cleavable spacers toward effective intestinal absorption
190
Development of oligonucleotide primers from the 16S-23S rRNA intergenic sequences for identifying different dairy and probiotic lactic acid bacteria by PCR
191
Development of oligopeptide-based novel biosensor by solid-phase peptide synthesis on microchip
192
Development of Olympic Values Knowledge Test: A Study on Secondary School 5th Grade Students
193
Development of omni-directional correlation functions for nonlinear model validation
194
Development of OMP based indirect ELISA to gauge the antibody titers in bovines against Pasteurella multocida
195
Development of onboard friction control
196
Development of one-dimensional model for initial design and evaluation of oil-free Co2 turbo-compressor
197
Development of one-energy group, two-dimensional, frequency dependent detector adjoint function based on the nodal method
198
Development of one-group interfacial area transport equation in bubbly flow systems
199
Development of one-pot synthesis of α-hydroxy α-trifluoromethyl amides
200
Development of one-step hollow fiber supported liquid phase sampling technique for occupational workplace air analysis using high performance liquid chromatography with ultra-violet detector
201
Development of on-line comprehensive two-dimensional liquid chromatography method for the separation of biomass compounds
202
Development of online high-/low-pH reversed-phase–reversed-phase two-dimensional liquid chromatography for shotgun proteomics: A reversed-phase-strong cation exchange-reversed-phase approach
203
Development of online instructional resources for Earth system science education: An example of current practice from China
204
Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content
205
Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content
206
Development of online sampling and matrix reduction technique coupled liquid chromatography/ion trap mass spectrometry for determination maduramicin in chicken meat
207
Development of On-line Shopping Mart System for Developing Countries
208
Development of on-line single-drop micro-extraction sequential injection system for electrothermal atomic absorption spectrometric determination of trace metals Original Research Article
209
Development of On-step Electrochemical Synthesis to Fabricate Three-dimensional N-doped Porous Graphene/magnetic Nanocomposite as novel superparamagnetic material for bio-medicinal uses
210
Development of Oocytes and Preimplantation Embryos of Mice Fed Diet Supplemented with Dunaliella salina
211
Development Of Open Leadership Scale
212
Development of Open Pore Copper Foams to Use as Bipolar Plates in Polymer Electrolyte Membrane Fuel Cell Stacks
213
Development of open-air type electrolyte-as-cathode glow discharge-atomic emission spectrometry for determination of trace metals in water
214
Development of open-cathode polymer electrolyte fuel cells using printed circuit board flow-field plates: Flow geometry characterisation
215
Development of Open-pit Mine Reclamation Cost Estimation Models: A Regression-based Approach
216
Development of operation and maintenance technology for HTGRs by using HTTR (High Temperature engineering Test Reactor)
217
Development of operation-aided system for chemical processes
218
Development of operational guidelines for thermally activated building system according to heating and cooling load characteristics
219
Development of Operational Strategies for Branding Ferula assa- foetida L. Medicinal Plant (Case study: Rangelands of Kerman Province, Iran)
220
Development of Opinions of Tourism Students at the Prague University of Economics and Business on the COVID-19 Pandemic
221
Development of optical computerized tomography in capacitively coupled plasmas and inductively coupled plasmas for plasma etching
222
Development of optical digital interferometry technique for measurement of thermodiffusion coefficients
223
Development of optical immunosensors for detection of proteins in serum
224
Development of optical naphthalene sublimation method
225
Development of optical nonlinearity, high dielectric constant and ferromagnetic behavior in a silicate glass nanocomposite by suitable heat treatment
226
Development of optical probes for in vivo imaging of polarized macrophages during foreign body reactions
227
Development of optical switching readout X-ray detector for high-speed imaging
228
Development of optical switching readout X-ray detector for high-speed imaging
229
Development of optimal and robust predictive guidance technique for Mars aerocapture
230
Development of Optimal Decoking Scheduling Strategies for an Industrial Naphtha Cracking Furnace System
231
Development of optimal design formula for bi-tuned mass dampers using multi-objective optimization
232
Development of optimal fuzzy models for predicting the strength of intact rocks
233
Development of optimal layout design system in multihole blanking process
234
Development of Optimal Poly-Alumino-Iron Sulphate Coagulant
235
Development of optimal protocol for visible and near-infrared reflectance spectroscopic evaluation of meat quality
236
Development of optimal protocol for visible and near-infrared reflectance spectroscopic evaluation of meat quality
237
Development of optimal salesforce compensation plans for independent, complementary and substitutable products
238
DEVELOPMENT OF OPTIMALLY DISORDERED CRITICAL RANDOM EXCITATION
239
Development of optimised carrier sequence in MCU-based random-frequency PWM
240
Development of optimization procedures for application-specific chemical sensing
241
Development of optimization technique of warm shrink fitting process for automotive transmission parts (3D FE analysis)
242
Development of optimized autonomous self-healing systems for epoxy materials based on maleimide chemistry
243
Development of optimized Cu–ZSM-5 deNOx catalytic materials both for HC-SCR applications and as FCC catalytic additives Original Research Article
244
Development of optimized point cloud merging algorithms for accurate processing to create earthwork site models
245
Development of optimized vascular fractal tree models using level set distance function
246
Development of optimized washer-shape for damage-free load application to composites
247
Development of optimized weighted-ENO schemes for multiscale compressible flows
248
Development of optimum manufacturing technologies of radial plates for the ITER toroidal field coils
249
Development of optimum process design system for sheet fabrication using response surface method
250
Development of orbitofrontal function: Current themes and future directions
251
Development of ordered organic monolayers (A perspective on “Self-assembly of 2,6-dimethyl pyridine on Cu(1 1 0) directed by weak hydrogen bonding” by J. Lee, D.B. Dougherty, J.T. Yates Jr.)
252
Development of ore sorting and its impact on mineral processing economics
253
Development of Organoiron Methodology for Preparation of the Polyene Natural Product Macrolactin A
254
Development of Organoiron Methodology for the C8-C16 Dienylamine Segment of the Streptogramin Antibiotics
255
Development of Organ-on-Chip for the Study of Placental Pathologies: A Ten-Year Study of Literature Published
256
Development of orientation during electrospinning of fibres of poly(ε-caprolactone)
257
Development of orientation with drawing in polystyrene films: effects of time and temperature
258
Development of oriented morphology and tensile properties upon superdawing of solution-spun fibers of ultra-high molecular weight poly(acrylonitrile)
259
Development of ornithine biosensor and application to estimation of prawn freshness
260
Development of oscillation method for reducing foodborne pathogens on lettuce and spinach
261
Development of O-serogroup specific PCR assay for detection and identification of Vibrio parahaemolyticus
262
Development of Osmotically Controlled Mucoadhesive Cup-Core (OCMC) Tablet for The Anti-Inflammatory Activity
263
Development of osteonecrosis after arthroscopic meniscal and chondral knee surgery: a report of five cases
264
Development of osteopenia in ovariectomized cynomolgus monkeys (Macaca fascicularis)
265
Development of ovine fetal ileal motility: role of muscarinic receptor subtypes
266
Development of oxazolidines derived from polyisobutylene succinimides as multifunctional stabilizers of asphaltenes in oil industry
267
Development of oxidation and corrosion resistance hydrophobic graphene oxide-polymer composite coating on copper
268
Development of oxidation resistant coatings for γ-TiAl based alloys
269
Development of oxidation resistant coatings for γ-TiAl based alloys
270
Development of Oxidative Stress in the Cells of Chlorella stigmatophoraand Their Bleaching by the Glycolate Pathway Inhibition under Salinization Conditions
271
Development of oxide dispersion strengthened W alloys produced by hot isostatic pressing
272
Development of oxide thick film capacitors for a real time pressure monitoring system
273
Development of oxides dispersion strengthened steels for high temperature nuclear reactor applications
274
Development of oxidised and heat–moisture treated potato starch film
275
Development of oxidized phosphatidylcholine isomer profiling method using supercritical fluid chromatography/tandem mass spectrometry
276
Development of oxygen electrodes for reversible solid oxide fuel cells with scandia stabilized zirconia electrolytes
277
Development of oxygen meters for the use in lead–bismuth
278
DEVELOPMENT OF OXYGEN MICROSENSORS FOR MONITORING CYANOBACTERIAL PHOTOSYNTHESIS IN ROMAN HYPOGEA
279
Development of oxygen scavenging system containing a natural free radical scavenger and a transition metal
280
Development of oxygen transport membrane La0.2Sr0.8CoO3−δ/Ce0.8Gd0.2O2−δ on the tubular CeO2 support Original Research Article
281
Development of oxygen-permeable ceramic membranes for NOx-sensors
282
Development of ozone-precursor relationships using VOC receptor modeling
283
Development of Pacemaker Lead Thrombosis in a Patient with Atrial Fibrillation during Apixaban Treatment
284
Development of packed-column suppressor system for capillary ion chromatography and its application to environmental waters
285
development of pairing card learning media to improve the ability to recognize the concept of numbers
286
DEVELOPMENT OF PAKISTAN’S TECHNICAL AND VOCATIONAL EDUCATION AND TRAINING (TVET): AN ANALYSIS OF SKILLING PAKISTAN REFORMS
287
Development of palladium L-edge X-ray absorption spectroscopy and its application for chloropalladium complexes
288
Development of palladium(II)-catalyzed oxidative cyclization of olefinic keto and/or lactone esters
289
Development of palm-sized differential plasmon resonance meter based on concept of Sprode
290
Development of PAMAM dendrimer composite membranes for CO2 separation
291
Development of Papads: A Traditional Savoury With Purslane, Portulaca oleracea, Leaves
292
Development of Parabolic Weirs for Simplified Discharge Measurement
293
Development of parallel DEM for the open source code MFIX
294
Development of parallel spark electrical discharge machining
295
Development of parallel wire regenerator for cryocoolers Original Research Article
296
Development of parallellized higher-order generalized depletion perturbation theory for application in equilibrium cycle optimization
297
Development of parameter based fault detection and diagnosis technique for energy efficient building management system
298
Development of parthenogenetic and cloned ovine embryos: effect of activation protocols
299
Development of Parthenogenetic Rat Embryos
300
Development of partial discharge monitoring technique using a neural network in a gas insulated substation
301
Development of partial model-based torque control of AC induction motors
302
Development of partially defatted soy flour and dhal
303
Development of particle flow simulator in charging process of blast furnace by discrete element method
304
Development of particle morphology of drying drops containing dissolved and suspended solids
305
Development of particle multiplicity distributions using a general form of the grand canonical partition function Original Research Article
306
Development of particle number size distribution near a major road in Helsinki during an episodic inversion situation
307
Development of particle size distribution during limestone impact attrition
308
Development of particle tracking algorithms for various types of finite elements in multi-dimensions
309
Development of particle-based biofilms for degradation of xenobiotic organic compounds
310
DEVELOPMENT OF PARTICLEBOARD FROM TROPICAL FAST-GROWING SPECIES FOR ACOUSTIC PANEL
311
Development of particle-reinforced nanostructured iron-based composite alloys for thermal spraying
312
Development of Particulate Matter and Heavy Metal Emission Factors for Kerman Copper Industries
313
Development of particulate matter speciation profiles for major sources in six cities in India
314
Development of particulate pulse-release formulations and their mathematical description
315
Development of Partition Functions of Ramanujan’s Works
316
Development of passive design zones in China using bioclimatic approach
317
DEVELOPMENT OF PASSIVE ENERGY SOURCE AS EARTH AIR PIPE HEAT EXCHANGERS (EAPHE) SYSTEM -A REVIEW
318
Development of passive hydrogen separation membranes made from Co-synthesized nanoscale cermet powders
319
Development of passive safety systems for Next Generation PWR in Japan
320
Development of passive safety systems for Next Generation PWR in Japan Original Research Article
321
Development of passive sampler technique for ozone monitoring. Estimation of indoor and outdoor ozone concentration
322
Development of passive sampler technique for ozone monitoring. Estimation of indoor and outdoor ozone concentration
323
Development of passive viscoelastic damper to attenuate excessive floor vibrations
324
Development of Pasta Products with Nonconventional Ingredients and Their Effect on Selected Quality Characteristics: A Brief Overview
325
Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization
326
Development of PBC/SSc overlap syndrome in chronic GVHD patient: immunological implications in the presence of mitochondrial, nucleolar and spindle midzone autoantigens
327
Development of PBPK model of molinate and molinate sulfoxide in rats and humans
328
Development of PCM/carbon-based composite materials
329
Development of PCR assay for early detection of CMV infection in renal transplant recipients
330
Development of PCR assays for detection of Escherichia coli O157:H7 in meat products
331
Development of PCR method for diagnosing of honey bee American Foulbrood disease
332
Development of PCR Primers for a New Fusarium oxysporum Pathogenic on Paris Daisy (Argyranthemum frutescens L.)
333
Development of PCR primers targeting fungal nirK to study fungal denitrification in the environment
334
Development of PCR primers targeting fungal nirK to study fungal denitrification in the environment
335
Development of PCR-based Detection Methods for the Quarantine Phytopathogen Synchytrium endobioticum, Causal Agent of Potato Wart Disease
336
Development of PCR-Based Method for Rapid Detection of Abrin Gene
337
Development of PCR–RFLP assay for the discrimination of Plasmodium species and variants of P. vivax (VK210, VK247 and P. vivax-like) in Anopheles mosquitoes
338
Development of PDA/Phospholipids/Lysine vesicles to detect pathogenic bacteria
339
Development of PDC Drill Bits for MWD Directional Drilling in Underground Coal Mine
340
Development of Pd–Cu catalyzed cross-coupling of terminal acetylenes with sp2-carbon halides
341
Development of PE-CVD Si/C/N:H films for tribological and corrosive complex-load conditions
342
Development of pedotransfer functions for a profile cone penetrometer
343
Development of pedotransfer functions for coastal plain soils using terrain attributes
344
Development of Pedotransfer Functions for Estimating Soil Retention Curves and Saturated Hydraulic Conductivity in Jordan Valley
345
Development of pedotransfer functions in soil hydrology
346
Development of pedotransfer functions using a group method of data handling for the soil of the Pianura Padano–Veneta region of North Italy: water retention properties
347
Development of peeling tool for micro-EDM
348
Development of peel-off mask ethanolic extract sargassum polycystum and its antioxidant activity using DPPH (2,2-diphenyl-1-picrylhydrazyl) method
349
Development of PEG–PLA/PLGA microparticles for pulmonary drug delivery prepared by a novel emulsification technique assisted with amphiphilic block copolymers
350
Development of pellet fuelling system in HL-2A tokamak
351
Development of pellet injector system for large helical device
352
Development of penetration resistance in the survival cell of a Formula 1 racing car
353
Development of peptide-based patterns by laser transfer
354
Development of peptidyl α-keto-β-aldehydes as new inhibitors of cathepsin L — comparisons of potency and selectivity profiles with cathepsin B
355
Development of perception of second language Japanese geminates: Role of duration, sonority, and segmentation strategy
356
Development of perceptual expertise in emotion recognition
357
Development of percolative electroconductive structure in piezoresistive polyisoprene–nanostructured carbon composite during vulcanization
358
Development of perforation hole detection system for space debris impact
359
Development of performance and error metrics for ultrasound-guided axillary brachial plexus block
360
Development of Performance Dashboards in Healthcare Sector: Key Practical Issues
361
Development of performance indicators for small Quebec drinking water utilities
362
Development of performance objectives for Listeria monocytogenes contaminated salmon (Salmo salar) intended used as sushi and sashimi based on analyses of naturally contaminated samples
363
Development of performance-based bitumen specifications for the Gulf countries
364
Development of perfusion-based micro 3-D cell culture platform and its application for high throughput drug testing
365
Development of perfusion-based microbioreactor platform capable of providing tunable dynamic compressive loading to 3-D cell culture construct: Demonstration study of the effect of compressive stimulations on articular chondrocyte functions
366
Development of peritoneal macrophage along a dendritic cell lineage in response to uptake of oligomannose-coated liposomes
367
Development of permethrin resistance in Culex quinquefasciatus Say in Kuala Lumpur, Malaysia
368
Development of Peronospora parasitica epidemics on radish as modelled by the effects of water vapour saturation deficit and temperature
369
Development of perovskite and phase transition in lead cobalt niobate modified lead zirconate titanate system
370
Development of perovskite and phase transition in lead cobalt niobate modified lead zirconate titanate system
371
Development of perovskite in Fe-substituted Pb(Zn1/3Ta2/3)O3 and dielectric characteristics
372
Development of perseveration, loss of set and memory scales for the Category Test
373
Development of Persian Monosyllabic and Disyllabic Words for Auditory Test of Adults and Evaluation of Their Face Validity Using Psychometric Function
374
Development of Persian version of teachers’ evaluation of aural/oral performance of children scale
375
Development of personnel internal benchmarking by 360°feedback approach with a case study in AT Pipe Company
376
Development of perspective cryogenic surgical apparatus Original Research Article
377
Development of Phagocytic Function of Cultured Human Monocytes Is Regulated by Cell Surface IL-10
378
Development of phantom for radiographic image optimization of standard patient in the lateral view of chest and skull examination
379
Development of phase change material for write once Blu-ray disc
380
Development of phase change materials based microencapsulated technology for buildings: A review
381
Development of phenanthrene catabolism in natural and artificial soils
382
development of phet-aid-based inquiry learning devices to improve student critical thinking skills
383
Development of phoma lesions on oilseed rape leaves inoculated with ascospores of A-group or B-group Leptosphaeria maculans (stem canker) at different temperatures and wetness durations
384
Development of phonological and orthographic processing in reading aloud, in silent reading, and in spelling: A four-year longitudinal study
385
Development of phosphate inter layered hydroxyapatite coating for stainless steel implants
386
Development of phosphine reagents for the high-performance liquid chromatographic–fluorometric determination of lipid hydroperoxides
387
Development of phosphonate modified Fe(1−x)MnxFe2O4 mixed ferrite nanoparticles: Novel peroxidase mimetics in enzyme linked immunosorbent assay
388
Development of phosphonium-based bicarbonate anion exchange polymer membranes
389
Development of phoswich detectors for simultaneous counting of alpha particles and other radiations (emitted from Actinides)
390
Development of photic zone euxinia in the eastern Mediterranean Basin during deposition of Pliocene sapropels
391
Development of photo micro-graph method to characterize dispersion of CNT in epoxy
392
Development of photocatalyst by combined nitrogen and yttrium doping
393
Development of photocatalyst materials for water splitting
394
Development of photocatalytic asphalt mixtures by the deposition and volumetric incorporation of TiO2 nanoparticles
395
Development of photochemical method for meniscal repair: A preliminary study
396
Development of photocrosslinked methylcellulose hydrogels for soft tissue reconstruction
397
Development of photocrosslinked sialic acid containing polymers for use in Aβ toxicity attenuation
398
Development of photoelectrochromic devices for dynamic solar control in buildings
399
Development of photoinjector RF cavity for high-power CW FEL
400
Development of photoinjector RF cavity for high-power CW FEL
401
Development of photoluminescent glass derived from rice husk
402
Development of photon beam diagnostics for VUV radiation from a SASE FEL
403
Development of photon beam diagnostics for VUV radiation from a SASE FEL
404
Development of photon detectors for a fast focusing DIRC
405
Development of photon detectors for a fast focusing DIRC
406
Development of photo-polymerisable polyvinyl alcohol for biotechnological applications
407
Development of photopolymerized fluorescence sensor for glucose analysis
408
Development of photosynthetic apparatus and respiration in pea seedlings during greening as influenced by toxic concentration of lead
409
Development of photosynthetic biomaterials for in vitro tissue engineering
410
Development of photovoltaic power generation in China: A transition perspective
411
Development of pH-responsive poly(methylmethacrylate-co-methacrylic acid) membranes using scCO2 technology. Application to protein permeation
412
Development of pH-responsive poly(γ-cyclodextrin) derivative nanoparticles
413
Development of pH-sensitive indicator dyes for the preparation of micro-patterned optical sensor layers
414
Development of phyllonite from granodiorite: Mechanisms of grain-size reduction in the Santa Rosa mylonite zone, California
415
Development of physical examination skills in a third-year surgical clerkship
416
Development of physically based meshes for two-dimensional models of meandering channel flow
417
Development of physical-parameter identification procedure for in-situ buildings with sliding-type isolation system
418
Development of physicochemical nitrogen removal process for high strength industrial wastewater
419
development of physics learning instrument with model project based learning to train students’ critical thinking skills
420
Development of P-I diagrams for FRP strengthened RC columns
421
Development of Pictorial Representation: A Teleology-based Model
422
Development of PID counter for charmed baryon spectroscopy experiment at J-PARC
423
Development of PID counter for charmed baryon spectroscopy experiment at J-PARC
424
Development of piezoelectric ceramics driven fatigue testing machine for small specimens
425
Development of piezoelectric immunosensors for competitive and direct determination of atrazine
426
Development of piezoelectric immunosensors for measurement of albuminuria
427
Development of piezoelectric monomorph actuator using electrophoretic deposition
428
Development of pig embryos reconstructed by microinjection of cultured fetal fibroblast cells into in vitro matured oocytes
429
Development of Pig Oocytes Activated by Stimulation of an Exogenous G Protein-Coupled Receptor
430
Development of Pile Driver and Load Set for Pile Group in Centrifuge
431
Development of Pile Driver and Load Set for Pile Group in Centrifuge
432
Development of pilot scale nanofiltration system for yeast industry wastewater treatment
433
Development of pilot-scale electrokinetic remediation technology to remove 60Co and 137Cs from soil
434
Development of pinhole-free amorphous aluminum oxide protective layers for biomedical device applications
435
Development of piperazine-tethered heterodimers as potent antimalarials against chloroquine-resistant P. falciparum strains. Synthesis and molecular modeling
436
Development of piping elements from textile reinforced composite materials for chemical apparatus construction
437
Development of piroxicam sensor based on molecular imprinted polymer-modified carbon paste electrode
438
Development of PISA Mathematical Problem Model on the Content of Change and Relationship to Measure Students Mathematical Problem-Solving Ability
439
Development of pistachio sorting system using principal component analysis (PCA) assisted artificial neural network (ANN) of impact acoustics
440
Development of pixel sensors with pitch for the ATLAS HL-LHC upgrade
441
Development of pixel sensors with pitch for the ATLAS HL-LHC upgrade
442
Development of pixelated scintillation detector for highly precise time measurement in MEG upgrade
443
Development of pixelated scintillation detector for highly precise time measurement in MEG upgrade
444
Development of pixellated Ir-TESs
445
Development of pixellated Ir-TESs
446
Development of planar air breathing direct methanol fuel cell stacks
447
Development of planar detectors with active edge
448
Development of planar detectors with active edge
449
Development of planar pixel modules for the ATLAS high luminosity LHC tracker upgrade
450
Development of planar pixel modules for the ATLAS high luminosity LHC tracker upgrade
451
Development of planar, air-breathing, proton exchange membrane fuel cell systems using stabilized sodium borohydride solution
452
Development of planning and its relation to other cognitive processes
453
Development of plant communities on set-aside in England
454
Development of Plant Physiology in Russia as Chronicled in the Journal Fiziologiya Rastenii(on the 50-Year Anniversary of the Journal)
455
Development of plasma chip
456
Development of plasma control system for divertor configuration on QUEST
457
Development of plasma facing component for LHCD antenna
458
Development of plasma pyrolysis/gasification systems for energy efficient and environmentally sound waste disposal
459
Development of plasma stored energy feedback control and its application to high performance discharges on JT-60U
460
Development of plasma targets for interaction experiments at Tokyo Institute of Technology
461
Development of plasma-based ion implantation (PBII) techniques at Osaka National Research Institute (ONRI)
462
Development of plasma-sprayed bioceramic coatings with bond coats based on titania and zirconia
463
Development of plasmin and plasma kallikrein selective inhibitors and their effect on M1 (melanoma) and ht29 cell lines
464
Development of plastic front side panels for green cars
465
Development of plastic Ti-based bulk-metallic-glass-matrix composites by controlling the microstructures
466
Development of plate bending elements for frame analysis
467
Development of Platinum Dendrite in Lithium Tetraborate Crystal Grown by the Czochralski Method
468
Development of platinum-based bimodal pore catalyst for CO2 reforming of CH4
469
Development of PLC-based Tension Control System
470
Development of Pleistocene glaciomarginal lake in the foreland of the Sudetes (SW Poland)
471
Development of Pleospora allii on Garlic Debris Infected by Stemphylium vesicarium
472
Development of plotting position for the general extreme value distribution
473
Development of PLZT dielectrics on base metal foils for embedded capacitors
474
Development of PMA real-time PCR method to quantify viable cells of Pantoea agglomerans CPA-2, an antagonist to control the major postharvest diseases on oranges
475
Development of PNA microarrays for gene diagnostics with TOF-SIMS
476
Development of polarized 3He gas system as a spin analyzer for low energy neutrons
477
Development of polarized 3He gas system as a spin analyzer for low energy neutrons
478
Development of Policy Recommendations to Support a National Autism Strategy: Case of a Virtual and Inclusive Stakeholder Engagement Process
479
Development of Pollen Grain Walls and Accumulation of Sporopollenin
480
Development of pollution indices for the middle section of the Lower Seyhan Basin (Turkey)
481
Development of pollution-induced community tolerance is linked to structural and functional resilience of a soil bacterial community following a five-year field exposure to copper
482
Development of pollution-induced community tolerance is linked to structural and functional resilience of a soil bacterial community following a five-year field exposure to copper
483
Development of Poly (A)-Tailed Universal Reverse Transcription PCR Method for Sequence-Independent Amplification of Rearranged Rotavirus
484
Development of poly (lactic-co-glycolic acid)-collagen scaffolds for tissue engineering
485
Development of poly(2-ethyl-2-oxaline) based water-soluble binder for injection molding of stainless steel powder
486
Development of poly(3-aminophenylboronic acid) modified graphite rod electrode suitable for fluoride determination
487
Development of poly(lactic acid) cellular materials: Physical and morphological characterizations
488
Development of poly(lactic acid) nanostructured membranes for the controlled delivery of progesterone to livestock animals
489
Development of poly(l-lactic acid) hollow fiber membranes for artificial vasculature in tissue engineering scaffolds
490
Development of poly(ε-caprolactone-co-l-lactide) and poly(ε-caprolactone-co-δ-valerolactone) as new degradable binder used for antifouling paint
491
Development of polybenzoxazine membranes for ethanol–water separation via pervaporation Original Research Article
492
Development of polycaprolactone scaffold with antibacterial activity by an integrated supercritical extraction and impregnation process
493
Development of polycarbonate based zeolite 4A filled mixed matrix gas separation membranes
494
Development of polycarbonate/acrylonitrile–butadiene–styrene copolymer based composites with functional fillers for car audio chassis
495
Development of polyclonal antibody-based indirect competitive enzyme-linked immunosorbent assay for sodium saccharin residue in food samples
496
Development of polyclonal heavy chain antibodies targeting programmed death ligand-1
497
Development of polyelectrolyte complexes of chitosan and phosphotungstic acid as pervaporation membranes for dehydration of isopropanol
498
Development of polyelectrolyte multilayer thin film composite membrane for water desalination application Original Research Article
499
Development of polyelectrolyte multilayer-coated electrospun cellulose acetate fiber mat as composite membranes
500
Development of polyester and polyamide conductive fibre
501
Development of polyethylenimine modified Zea mays as a high capacity biosorbent for the removal of As (III) and As (V) from aqueous system
502
Development of polygon shift method for generating 3D view map of buildings
503
Development of polyindole/tungsten carbide nanocomposite‑modified electrodes for electrochemical quantification of chlorpyrifos
504
Development of polyion complex membranes based on cellulose acetate modified by oxygen plasma treatment for pervaporation
505
Development of polymer composites using modified, high-structural integrity graphene platelets
506
Development of polymer concrete with polybutadiene matrix
507
Development of polymer films by the coalescence of polymer particles in powdered and aqueous polymer-modified mortars
508
Development of polymer inclusion membranes based on cellulose triacetate: carrier-mediated transport of cerium(III)
509
Development of polymer modified cementitious (polycem) tiles for flooring
510
Development of Polymer Nanocomposites for Rapid Manufacturing Application
511
Development of polymer wicks for the fabrication of bio-medical sensors
512
Development of polymer–ceramic composites for improved fire resistance
513
Development of Polymer-coated Glass Slides as Optical Oligonucleotide Microarrays
514
Development of polymeric hollow fiber membranes containing catalytic metal nanoparticles
515
Development of polymer-membrane based electrodes for suramin Original Research Article
516
Development of Polymer-Modified Concrete Using Ethylene Vinyl Acetate Copolymer
517
Development of polymethylphenylsiloxane-coated fiber for solid-phase microextraction and its analytical application of qualitative and semi-quantitative of organochlorine and pyrethroid pesticides in vegetables Original Research Article
518
Development of Poly-Naphthalene Sulphonate Based Concrete Admixture
519
Development of polynomial regression models for composite dynamic envelopes’ thermal performance forecasting
520
Development of polyoxadiazole nanocomposites for high temperature polymer electrolyte membrane fuel cells
521
Development of polyphenol oxidase activity in the micropylar endosperm of tomato seeds
522
Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA
523
Development of Polypropylene-Based Ultraviolet-Stabilized Formulations for Harsh Environments
524
Development of polypyrrole-based electromechanical actuators
525
Development of polysaccharides-based edible coatings for citrus fruits: A layer-by-layer approach
526
Development of Polysulfone/Activated Carbon Nanofibers Mixed Matrix Membrane for CO2/CH4 Separation
527
Development of polythene film bag as a respirometer
528
Development of polyurethane/polyaniline membranes for zinc recovery through electrodialysis Original Research Article
529
Development of population control strategies for mink Mustela vison, using floating rafts as monitors and trap sites Original Research Article
530
Development of Populations of Softrot Bacteria on Witloof Chicory Leaves during Root Production in the Field
531
development of pop-up book media based on balanced literacy approach to improve skills of reading class 1 students basic school
532
Development of popup Langmuir probe system for the JET MkIIa divertor
533
Development of pore size-controlled silica membranes for gas separation by chemical vapor deposition
534
Development of porosity in combined phosphoric acid-carbon dioxide activation Original Research Article
535
Development of porous carbon electrodes for direct methanol fuel cells
536
Development of porous ceramic bodies for applications in tissue engineering and drug delivery systems
537
Development of porous ceramic bodies from kaolin deposits for industrial applications
538
Development of porous corundum layers on cordierite ceramics
539
Development of porous lamellar poly(l-lactic acid) scaffolds by conventional injection molding process
540
Development of porous metal oxide thin films by co-evaporation
541
Development of porous nickel membrane made by uniaxial pressing for hydrogen separation Original Research Article
542
Development of porous PEG hydrogels that enable efficient, uniform cell-seeding and permit early neural process extension
543
Development of Porous Photopolymer Resin-SWCNT Produced by Digital Light Processing Technology Using for Bone Femur Application
544
Development of porous silicon matrix and characteristics of porous silicon/tin oxide structures
545
Development of porous solid reactant for thermal-energy storage and temperature upgrade using carbonation/decarbonation reaction
546
Development of porous structure simulator for multi-scale simulation of irregular porous catalysts
547
Development of porous Ti6Al4V samples by microsphere sintering
548
Development of porous titanium for biomedical applications: A comparison between loose sintering and space-holder techniques
549
Development of porphyrin dispersed sol–gel films as HCl sensitive optochemical gas sensor
550
Development Of Portable Electronic Nose Device For Perfume Odour Classification
551
Development of portable fuel cell arrays with printed-circuit technology
552
Development of portable multicoincidence radionuclide analysis systems
553
Development of portable multicoincidence radionuclide analysis systems
554
Development of portable NMR polarimeter system for polarized HD target
555
Development of portable NMR polarimeter system for polarized HD target
556
Development of position-sensitive neutron detector based on scintillator
557
Development of position-sensitive neutron detector based on scintillator
558
Development of position-sensitive proton recoil telescope (PSPRT)
559
Development of position-sensitive proton recoil telescope (PSPRT)
560
Development of position-sensitive time-of-flight spectrometer for fission fragment research
561
Development of position-sensitive time-of-flight spectrometer for fission fragment research
562
Development of positive electrodes with an SnO2 coating by applying a sputtering technique for lead-acid batteries
563
Development of positron detector for μSR based on multi-pixel photon counter
564
Development of positron detector for μSR based on multi-pixel photon counter
565
Development of posttraumatic stress disorder in adult bipolar patients with histories of severe childhood abuse
566
Development of potent and selective dipeptidyl peptidase II inhibitors
567
Development of potent and selective factor Xa inhibitors
568
Development of potent and selective small-molecule human Urotensin-II antagonists
569
Development of potent, allosteric dual Akt1 and Akt2 inhibitors with improved physical properties and cell activity
570
Development of potent, orally active 1-substituted-3,4-dihydro-2-quinolone glycogen phosphorylase inhibitors
571
Development of potential acid sulfate paleosols in Paleocene floodplains, Bighorn Basin, Wyoming, USA
572
Development of potential ecological niches in impact-induced hydrothermal systems: The small-to-medium size impacts
573
Development of potentiometric creatinine-sensitive biosensor based on ISFET and creatinine deiminase immobilised in PVA/SbQ photopolymeric membrane
574
Development of potentiometric ion sensors based on insertion materials as sensitive element
575
Development of powder metallurgy T42 high speed steel for structural applications
576
Development of powder metallurgy technique for synthesis of U3Si2 dispersoid
577
Development of power system control facilities in China
578
Development of Power System Protection Laboratory Through Senior Design Projects.
579
DEVELOPMENT OF POWER TRANSMISSION SYSTEM FOR WATERING MACHINES
580
Development of p-phenylbenzyl as a new protecting group: protection and deprotection of alcohols
581
Development of Pr0.58Sr0.4Fe0.8Co0.2O3 − δ–GDC composite cathode for solid oxide fuel cell (SOFC) application
582
Development of practical design methods for steel structures with semi-rigid connections
583
Development of practical methodologies for the synthesis of functionalized benzoboroxoles
584
Development of practical methodologies for the synthesis of novel 3(4-oxo-4H-chromen-3-yl)acrylic acid hydrazides
585
Development of practical methodologies for the synthesis of novel 3(4-oxo-4H-chromen-3-yl)acrylic acid hydrazides
586
Development of practical surface acoustic wave liquid sensing system and its application for measurement of Japanese tea
587
Development of practical syntheses of potent non-nucleoside reverse transcriptase inhibitors
588
Development of practically available up-scaled high-silica CHA-type zeolite membranes for industrial purpose in dehydration of N-methyl pyrrolidone solution
589
Development of practice guidelines
590
Development of Pragmatic Competence
591
Development of pre-breeding stocks with improved sucrose content over two selection cycles in sugarcane
592
Development of precipitation strengthened brass with Ti and Sn alloying elements additives by using water atomized powder via powder metallurgy route
593
Development of precision spray forming for rapid tooling
594
Development of predator evasion in Atlantic herring, Clupea harengus L.
595
Development of Prediction Models for Friction Losses in Drip Irrigation Laterals equipped with Integrated In-line and On-line Emitters using Dimensional Analysis
596
Development of prediction models for next-day building energy consumption and peak power demand using data mining techniques
597
Development of prediction models for quantification of total methane emission from enteric fermentation of young Holstein cattle at various ages
598
Development of predictive equations for lifting strengths
599
Development of predictive model for fly-ash erosion phenomena in coal-burning boilers
600
Development of predictive modelling approaches for surface temperature and associated microbiological inactivation during hot dry air decontamination
601
Development of predictive models by adaptive fuzzy partitioning. Application to compounds active on the central nervous system
602
Development of predictive models for shear strength of HSC slender beams without web reinforcement using machine-learning based techniques
603
Development of predictive models of π-facial selectivity; a critical study of nucleophilic addition to sterically unbiased ketones
604
Development of predictive models to explain the distribution of the West Indian manatee Trichechus manatus in tropical watercourses Original Research Article
605
Development of predictive retention–activity relationship models of non-steroidal anti-inflammatory drugs by micellar liquid chromatography: comparison with immobilized artificial membrane columns
606
Development of predictive tools to assess capping tendency of tablet formulations
607
Development of preform moulding technique using expanded graphite for proton exchange membrane fuel cell bipolar plates
608
Development of preionisation systems for RFX
609
Development of preparation method to control silica sol–gel synthesis with rheological and morphological measurements
610
Development of preparatory activity indexed by the contingent negative variation in children
611
Development of pressure sensitive paints based on silicon nanostructured powders
612
Development of pressurised hot water extraction (PHWE) for essential compounds from Moringa oleifera leaf extracts
613
Development of pressurized liquid extraction and cleanup procedures for determination of organochlorine pesticides in soils
614
Development of pressurized subcritical water extraction combined with stir bar sorptive extraction for the analysis of organochlorine pesticides and chlorobenzenes in soils
615
Development of Prestressed Concrete Using Fe–Mn–Si-Based Shape Memory Alloys Containing NbC
616
Development of Preventive Measures to Eliminate Incomplete Factors in Shoe Manufacturing Enterprises
617
Development of Preventive Vaccines for Hepatitis C Virus E1/E2 Protein
618
Development of primary sensory neurons in the trigeminal nervous system; dependency on neurotrophins and other substances
619
Development of primer and probe sets for the detection of plant species in honey
620
Development of prismatic lithium-ion cells using aluminum alloy casing
621
Development of Probabilistic Design Method for Fast Reactor Fuel Rod
622
Development of Probabilistic Models for Computing Optimal Distribution Substation Spare Transformers
623
Development of probabilistic models to estimate fire-induced cable damage at nuclear power plants Original Research Article
624
Development of Probabilistic Safety Assessment with respect to the first demonstration nuclear power plant of high temperature gas cooled reactor in China
625
Development of probabilistic seismic hazard analysis for international sites, challenges and guidelines
626
Development of probe for thermal conductivity measurement of food materials under heated and pressurized conditions Original Research Article
627
Development of Probiotic Apple Juice using Encapsulated Probiotics in Xanthan-Chitosan Based Hydrogels
628
Development of probiotic milk drinks using probiotic strain isolated from local yogurt
629
Development of probiotic-enriched dried fruits by vacuum impregnation Original Research Article
630
development of problem-based learning device to improve metacognition ability
631
Development of process control in sheet metal forming
632
Development of process design system for press forming—multi-objective optimization of intermediate die shape in transfer forming
633
Development of Process Flow Sheets for the Purification of Supercoiled Plasmids for Gene Therapy Applications
634
Development of Process Flow Sheets for the Purification of Supercoiled Plasmids for Gene Therapy Applications
635
Development of process indicators for coastal zone management assessment in France
636
Development of process maps for plasma spray: case study for molybdenum
637
Development of process maps for plasma spray: case study for molybdenum
638
Development of process maps for superplastic forming of Weldalite™ 049
639
Development of process maps for superplastic forming of Weldalite™ 049
640
Development of Process Model for Optimal Selection of Process Parameters for Geometric Tolerances and Surface Roughness in Stereolithography
641
Development of process visualization systems: An object-oriented approach
642
Development of processing map coupling grain size for the isothermal compression of 300 M steel
643
Development of processing map for 6061 Al/15% SiCp through neural networks
644
Development of processing maps for 2124Al/SiCp composites
645
Development of processing maps for 3 vol.% TiCp/AZ91D composites material
646
Development of processing maps for 6061 Al/15% SiCp composite material
647
Development of processing maps for 6061 Al/15% SiCp composite material
648
Development of processing maps for a Ni-based superalloy
649
Development of processing maps for Al/SiCp composite using fuzzy logic
650
Development of Product Space Theory for Systemic Analysis of Industries in Kermanshah Province
651
Development of production system of cryogenic micro-slush particles using a two-fluid nozzle
652
Development of Production Technology of Castle Composite Materials
653
DEVELOPMENT OF PRODUCTIVITY MEASUREMENT AND ANALYSIS FRAMEWORK FOR MANUFACTURING COMPANIES
654
Development of Productivity Measurement and Analysis Framework for Manufacturing Companies
655
Development of Products with Purified Caryota Palm (Caryota urens) Sago
656
DEVELOPMENT OF PROFESSIONAL ATTITUDES SCALE FOR COLLEGE DIRECTORS OF PHYSICAL EDUCATION IN NWFP PROVINCE
657
Development of Professionalism in Graduate Medical Education: A Case-Based Educational Approach From the College of American Pathologists’ Graduate Medical Education Committee
658
Development of progesterone receptor antagonists from 1,2-dihydrochromeno[3,4-f]quinoline agonist pharmacophore
659
Development of programmes for enhancing sexual health
660
Development of Progressive Chiari I Malformation in a Child with Unilateral Sporadic Retinoblastoma
661
Development of project cost contingency estimation model using risk analysis and fuzzy expert system
662
Development of prominent PLD (Aurora method) suitable for high-quality and low-temperature film growth
663
Development of prostaglandin D2 receptor antagonist: discovery of highly potent antagonists Original Research Article
664
Development of protection in rainbow trout (Oncorhynchus mykiss, Walbaum) to Vibrio anguillarum following use of the probiotic Kocuria SM1
665
Development of Protein Enriched Apple Beverage
666
Development of protein-based bioplastics with antimicrobial activity by thermo-mechanical processing Original Research Article
667
Development of proteomic tools to study protein adsorption on a biomaterial, titanium grafted with poly(sodium styrene sulfonate)
668
Development of prototype heterogeneous chitosan membrane using different plasticizer for glutamate sensing
669
DEVELOPMENT OF PROTOTYPE HIGHWAY ASSET MANAGEMENT SYSTEM
670
DEVELOPMENT OF PROTOTYPE HIGHWAY ASSET MANAGEMENT SYSTEM
671
Development of Prototype Solution of Information System for E-selling Medical Books and Journals of the Association of Cardiologists of BiH
672
Development of prototype structure for low-cost and energy-efficient house by utilizing palm tree fronds
673
Development of pseudo-amphoteric sponge media using polyalkylene oxide–modified polydimethylsiloxane (PDMS) for rapid start-up of wastewater treatment plant
674
Development of pseudoelasticity in Fe–10Ni–7Mn (wt%) high strength martensitic steel by intercritical heat treatment and subsequent ageing
675
Development of PSPO Simulation Optimization Algorithm
676
Development of psychosis in patients with epilepsy treated with lamotrigine: Report of six cases and review of the literature
677
Development of Pt/ASDBC catalyst for room temperature recombiner of atmosphere detritiation system
678
Development of Pt/C multilayer supermirrors for hard X-ray optics
679
Development of Pt/C multilayer supermirrors for hard X-ray optics
680
Development of Pt/SO42−/ZrO2 catalyst for isomerization of light naphtha
681
Development of Pt/TiO2 nanohybrids-modified SWCNT electrode for sensitive hydrogen peroxide detection
682
Development of Pt-Carbon catalysts using MCM-41 template for HI decomposition reaction in S–I thermochemical cycle
683
Development of PtGe and PtIn anodic catalysts supported on carbonaceous materials for DMFC
684
Development of PtRu-CeO2/C anode electrocatalyst for direct methanol fuel cells
685
Development of p-type amorphous Cu1−xBxO2−δ thin films and fabrication of pn hetero junction
686
Development of p-type detectors for present LHC and luminosity upgrades
687
Development of p-type detectors for present LHC and luminosity upgrades
688
Development of Public Health Priorities for End-of-Life Initiatives Review Article
689
Development of public health program for type 1 diabetes in a university community: preliminary evaluation of behavioural change wheel
690
Development of Public Libraries in India
691
Development of Public Service Motivation Scale
692
Development of pulmonary arteries after central aortopulmonary shunt in newborns
693
Development of pulmonary arteriovenous fistulas after bidirectional cavopulmonary shunt
694
Development of pumpkin seed for production of edible oil: distribution of tocopherols in breeding lines
695
Development of PVA based micro-porous polymer electrolyte by a novel preferential polymer dissolution process
696
Development of PVC-resin-controlled release formulation for pheromones and use in mating disruption of yellow rice stem borer, Scirpophaga incertulas
697
Development of p-Version handbook solutions for analysis of composite bonded joints
698
DEVELOPMENT OF PYRAMIDAL MICROWAVE ABSORBER USING SUGAR CANE BAGASSE (SCB)
699
Development of Pyridopyrimidines as Potent Akt1/2 Inhibitors
700
Development of pyrimidine-based inhibitors of Janus tyrosine kinase 3
701
Development of pyroelectric ceramics for high-temperature applications
702
Development of pyrolysis-fractography
703
Development of pyrolysis–GC with selective detection: coupling of pyrolysis–GC to atomic emission detection (py–GC–AED)
704
Development of Pyrrole-Imidazole Polyamide for Specific Regulation of Human Aurora Kinase-A and -B Gene Expression Original Research Article
705
Development of PZT powders by wet chemical method and fabrication of multilayered stacks/actuators
706
Development of PZT powders by wet chemical method and fabrication of multilayered stacks/actuators
707
Development of PZT sputtering method for mass-production
708
Development of QCM sensors modified by AlPO4-18 films
709
Development of QRS Detection using Short-time Fourier Transform based Technique
710
Development of QSARs to investigate the bacterial toxicity and biotransformation potential of aromatic heterocylic compounds
711
Development of QT interval correcting formulae for the halothane-anesthetized guinea-pig model
712
Development of quality bounds for time and frequency domain models: application to the Shell distillation column
713
Development of Quality Index Method (QIM) scheme for fresh cod (Gadus morhua) fillets and application in shelf life study
714
Development of Quality Index Method (QIM) scheme for spiny lobster (Panulirus argus, Latreille, 1804) stored in ice
715
Development of quality matrix to measure the effectiveness of quality management systems in Turkish construction industry
716
Development of Quality of Classroom Life Questionnaire in L2 Contexts: Investigating the Impact of Modular Instruction
717
Development of quantitative structure gas chromatographic relative retention time models on seven stationary phases for 209 polybrominated diphenyl ether congeners
718
Development of quantitative structure–activity relationship (QSAR) models to predict the carcinogenic potency of chemicals. II. Using oral slope factor as a measure of carcinogenic potency
719
Development of quantitative structure–activity relationships for interpretation of the migration behavior of neutral platinum(II) complexes in microemulsion electrokinetic chromatography
720
Development of quantum well infrared photodetectors at the Center for Quantum Devices
721
Development of quantum well infrared photodetectors in France
722
Development of quartz c-axis crossed/single girdles under simple-pure shear deformation: Results of visco-plastic self-consistent modeling
723
Development of quasi common path phase-shifting interferometer for measurement of natural convection fields
724
Development of quaternary Fe-based bulk metallic glasses
725
Development of quaternary Fe-based bulk metallic glasses with high saturation magnetization above 1.6 T
726
Development of QuEChERS-based extraction and liquid chromatography–tandem mass spectrometry method for quantifying flumethasone residues in beef muscle
727
Development of Quench Detection System for W7-X
728
Development of Questionnaires to Measure Physical Activity Cognitions among Taiwanese Adolescents
729
Development of Questionnaires to Measure Psychosocial Influences on Childrenʹs Physical Activity,
730
Development of quinolone-resistant strains of Escherichia coli in stools of patients with cirrhosis undergoing norfloxacin prophylaxis: clinical consequences
731
Development of Qur’anic Ontologies: A Domain Review Study
732
Development of rabbit embryos during a 96-h period of in vitro culture after superovulatory treatment under conditions of elevated ambient temperature
733
Development of radiation dosimetric phantoms made from SPC/NaOH/IA-PAE/Rhizophora spp. particleboards
734
Development of radiation hard edgeless detectors with current terminating structure on p-type silicon
735
Development of radiation hard edgeless detectors with current terminating structure on p-type silicon
736
Development of radiation hard sensors for very high luminosity colliders—CERN-RD50 project
737
Development of radiation hard sensors for very high luminosity colliders—CERN-RD50 project
738
Development of radiation tolerant monolithic active pixel sensors with fast column parallel read-out
739
Development of radiation tolerant monolithic active pixel sensors with fast column parallel read-out
740
Development of radiation tolerant semiconductor detectors for the Super-LHC
741
Development of radiation tolerant semiconductor detectors for the Super-LHC
742
Development of radiation-damage halos in low-quartz: cathodoluminescence measurement after He+ ion implantation
743
Development of radiation-tolerant silicon microstrip sensor for the ATLAS inner tracker at the SLHC
744
Development of radiation-tolerant silicon microstrip sensor for the ATLAS inner tracker at the SLHC
745
Development of radical addition–cyclization–elimination reaction of oxime ether and its application to formal synthesis of (±)-martinelline
746
Development of radiolabeled dextran coated iron oxide nanoparticles with 111-In and its biodistribution studies
747
Development of Radiology in Iran
748
Development of radon calibration chamber at KRISS
749
Development of Rainfall Model using Meteorological Data for Hydrological Use
750
Development of rainfall–runoff models using Takagi–Sugeno fuzzy inference systems
751
Development of ramp-edge SNS Josephson junctions and SQUIDs
752
Development of ramp-edge SNS Josephson junctions and SQUIDs
753
Development of random amplified polymorphic DNA-based specific polymerase chain reaction primers for the detection of the histamine-producing bacterium Photobacterium damselae subsp. damselae
754
Development of Random Amplified Polymorphism DNA Markers Linked to CMV-B2 Resistance Gene in Melon
755
Development of Rapid and Simple Analytical Method for Some Proton Pump Inhibitors (PPIs) Using HPLC
756
Development of rapid and simultaneous detection of four major foodborne pathogens using a multiplex PCR method
757
Development of rapid manufacturing process by high-speed machining with automatic fixturing
758
Development of rapid method for the estimation of reactive silica in fly ash
759
Development of Rapid One-Step Immunochromatographic Assay
760
Development of rapid response thermocouple probes for use in a batch ohmic heating system Original Research Article
761
Development of rapid screening method for low-yielding chitosanase activity using Remazol Brilliant Blue-chitosan as substrate
762
Development of Rapid Strip Assay for Typhoid, Dengue and Ma-laria
763
Development of rapid thermal processing of tubular cobalt oxide silica membranes for gas separations
764
Development of rapid tooling for sheet metal drawing using nickel electroforming and stereolithography processes
765
Development of rapid, simple and sensitive real-time reverse transcriptase loop-mediated isothermal amplification method (RT-LAMP) to detect viral diseases (PRDV, YHV, IHHNV and TSV) of penaeid shrimp
766
Development of rapid, simple and sensitive real-time reverse transcriptase loop-mediated isothermal amplification method (RT-LAMP) to detect viral diseases (PRDV, YHV, IHHNV and TSV) of penaeid shrimp
767
Development of rapidly quenched brazing foils to join tungsten alloys with ferritic steel
768
Development of Rapidly Quenched Soft Magnetic Materials in China
769
Development of rapidly solidified (RS) magnesium–aluminium–zinc alloy
770
Development of rapidly solidified (RS) magnesium–aluminium–zinc alloy
771
Development of rapidly solidified Al–Y–Ni-based alloys
772
Development of rapid-set high-strength cement using statistical experimental design
773
Development of rare-earth doped fibres for amplifiers in WDM systems
774
Development of ratiometric fluorescent pH sensors based on chromenoquinoline derivatives with tunable pKa values for bioimaging
775
Development of ratiometric fluorescent probe for zinc ion based on indole fluorophore
776
Development of rational models for tunnel blast prediction based on a parametric study
777
Development of rationally designed affinity-based drug delivery systems
778
Development of RBF-DQ method for derivative approximation and its application to simulate natural convection in concentric annuli
779
Development of RCNP polarized 3He ion source based on electron pumping
780
Development of RCNP polarized 3He ion source based on electron pumping
781
Development of RE1/1 RPCs for the CMS muon trigger system
782
Development of RE1/1 RPCs for the CMS muon trigger system
783
Development of reactive thin film polymer brush membranes to prevent biofouling
784
Development of reactive thiol-modified monolithic capillaries and in-column surface functionalization by radical addition of a chromatographic ligand for capillary electrochromatography
785
Development of reactively sputtered metal oxide films for hydrogen-producing hybrid multijunction photoelectrodes
786
Development of Reactivity to New Myelin Antigens during Chronic Relapsing Autoimmune Demyelination
787
Development of Reading Skill through Activity Based Learning at Grade-VI in Khyber Pakhtunkhwa
788
Development of readout chips for the ATLAS Semiconductor Tracker
789
Development of readout chips for the ATLAS Semiconductor Tracker
790
Development of readout system for FE-I4 pixel module using SiTCP
791
Development of readout system for FE-I4 pixel module using SiTCP
792
Development of readout systems for neutron detectors
793
Development of readout systems for neutron detectors
794
Development of reagents to study the turkeyʹs immune response: Cloning and characterisation of two turkey cytokines, interleukin (IL)-10 and IL-13
795
Development of reagents to study the turkeyʹs immune response: Cloning and characterisation of two turkey cytokines, interleukin (IL)-10 and IL-13
796
Development of real time personal neutron dosimeter with two silicon detectors
797
Development of real-time PCR (TaqMan®) assays for the detection and quantification of Botrytis cinerea in planta
798
Development of Real-Time PCR Assays for Detecting Matrix Metalloproteinases-2 & 9 Over-expression in Canine Mammary Tumours
799
Development of real-time PCR methods to quantify patulin-producing molds in food products Original Research Article
800
Development of real-time PCR systems based on SYBR Green for the specific detection and quantification of Klebsiella pneumoniae in infant formula
801
Development of real-time PCR systems based on SYBR® Green I and TaqMan® technologies for specific quantitative detection of Phoma tracheiphila in infected Citrus
802
Development of real-time plasma analysis and control algorithms for the TCV tokamak using Simulink
803
Development of Real-Time Safety Control System for Urban Gas Supply Network
804
Development of real-time sensitive chiral analysis technique using quartz crystal analyzer
805
Development of real-time state estimators for reaction–separation processes: A continuous flash fermentation as a study case
806
Development of real-time thermal neutron monitor using boron-loaded plastic scintillator with optical fiber for boron neutron capture therapy
807
Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts
808
Development of rearing and testing protocols for a new freshwater sediment test species: The gastropod Valvata piscinalis
809
Development of Receptor Bronchial System in Isolated Preparation of Piglet Trachea In Vitro
810
Development of recombinant cationic polymers for gene therapy research
811
Development of recombinant nucleocapsid protein based IgM-ELISA for the early detection of distemper infection in dogs
812
Development of recombinant nucleocapsid protein based IgM-ELISA for the early detection of distemper infection in dogs
813
Development of Recombinant Nucleocapsid Protein based indirect ELISA for Serodiagnosis of Peste des Petits Ruminants in Sheep and Goats
814
Development of recombinant protein-based influenza vaccine: Expression and affinity purification of H1N1 influenza virus neuraminidase
815
Development of Reconfigurable Rehabilitation Robot for Post-stroke Forearm and Wrist Training
816
Development of Records Management System for Matriculation Colleges in Malaysia
817
Development of recovery domains: Examples from the Prominent Hill IOCG deposit, Australia
818
Development of re-crystallized W–1.1%TiC with enhanced room-temperature ductility and radiation performance
819
Development of recyclable iridium catalyst for C–H borylation
820
Development of recycled PET fiber and its application as concrete-reinforcing fiber
821
Development of recycling processes for clean rejected MOX fuel pellets
822
Development of red wall tiles by the dry process using Brazilian raw materials
823
Development of red-eyed treefrog eggs affects efficiency and choices of egg-foraging wasps
824
Development of redox deposition of birnessite-type MnO2 on activated carbon as high-performance electrode for hybrid supercapacitors
825
Development of Reduced Activation Ferritic–Martensitic Steels and fabrication technologies for Indian test blanket module
826
Development of reduced and optimized reaction mechanisms based on genetic algorithms and element flux analysis
827
Development of reduced calorie chocolate cake with jackfruit seed (Artocarpus heterophyllus Lam.) flour and polydextrose using response surface methodology (RSM)
828
Development of reduced fat minced meats using inulin and bovine plasma proteins as fat replacers
829
Development of reduced-order models for aeroelastic analysis and flutter prediction using the CFL3Dv6.0 code
830
Development of refractory armored silicon carbide by infrared transient liquid phase processing
831
Development of regenerated cellulose/halloysites nanocomposites via ionic liquids
832
Development of regenerative shock absorber using the piezoelectric patch for electric vehicles
833
Development of Regional Flood Frequency Relationships Using L-moments for Middle Ganga Plains Subzone 1(f) of India
834
Development of regional flood-duration–frequency curves based on the index-flood method
835
Development of regional sustainability indicators and the role of academia in this process: the Portuguese practice
836
Development of regionalisation procedures using a multi-model approach for flow simulation in an ungauged catchment
837
Development of regression equations for predicting energy and hygrothermal performance of buildings
838
Development of Reinforcement Learning Algorithm to Study the Capacity Withholding in Electricity Energy Markets
839
Development of rejuvenation process in Iranian industrial heritage based on Grounded theory
840
Development of Relative Clause Constructions in English L2
841
Development of relative humidity models by using optimized neural network structures
842
Development of relatively selective, chemically and mechanically robust solid-phase microextraction fibers based on methacrylic acid–trimethylolpropanetrimethacrylate co-polymers
843
Development of relativistic shock waves in viscous gluon matter Original Research Article
844
Development of relaxor ferroelectric materials for screen-printing on alumina and silicon substrates
845
Development of reliability index for combined cycle power plant using graph theoretic approach
846
Development of Reliability Model for Wind Farm Power Generation
847
Development of reliability targets for planning transmission facilities using probabilistic techniques-a utility approach
848
Development of reliable analytical tools for evaluating the influence of reductive winemaking on the quality of Lugana wines Original Research Article
849
Development of reliable diamond window for EC launcher on fusion reactors
850
Development of reliable modeling methodologies for engine fan blade out containment analysis. Part II: Finite element analysis
851
Development of reliable modeling methodologies for fan blade out containment analysis – Part I: Experimental studies
852
Development of remineralizing, antibacterial dental materials
853
Development of remote handling technology of liquid lithium target and replaceable back plate with lip seal in IFMIF-EVEDA
854
Development of remote healthcare system for measuring and promoting healthy lifestyle
855
Development of remote maintenance equipment for ITER blankets
856
Development of remote monitoring and maintenance system for machine tools
857
Development of remote pipe cutting tool for divertor cassettes in JT-60SA
858
Development of remote welding techniques for in-pile IASCC capsules and evaluation of material integrity on capsules for long irradiation period
859
Development of repetitive corrugation and straightening
860
Development of repetitive corrugation and straightening
861
Development of representative indicators of hydrologic alteration
862
Development of reproducible test inocula for disinfectant testing
863
Development of reproductive organs in the ivory shell Babylonia japonica: Observations from wild populations and laboratory-reared juveniles
864
Development of reservoir operation policies considering variable agricultural water demands
865
Development of Reservoir Operation Policies Using Integrated Optimization-Simulation Approach
866
Development of residential PEFC cogeneration systems: Ru catalyst for CO preferential oxidation in reformed gas
867
Development of Residual Forces in Long Driven Piles in Weathered Soils
868
Development of residual strains in human vertebral trabecular bone after prolonged static and cyclic loading at low load levels
869
Development of residual stress and damage in thermal barrier coatings
870
Development of resin-to-resin transfer reactions (RRTR) using Sonogashira chemistry
871
Development of Resistance byAnticarsia gemmatalisfrom Brazil and the United States to a Nuclear Polyhedrosis Virus under Laboratory Selection Pressure
872
Development of resistance in chickpea to Ascochyta blight
873
Development of resistance models to describe measurements of bi-directional ammonia surface–atmosphere exchange
874
Development of resistance of some Klebsiella species isolated locally from urinary tract infection to some beta - lactam antibiotics
875
DEVELOPMENT OF RESISTANCE TO SOME INSECTICIDES AND ITS RELATION TO SOME BIOCHEMICAL CHANGES IN Spodoptera littoralis (BOISD.)
876
Development of resistant materials to beam impact and radiation damage
877
Development of Resizing Software for Paper Patterns
878
Development of resonant detectors for epithermal neutron spectroscopy at pulsed neutron sources
879
Development of resonant detectors for epithermal neutron spectroscopy at pulsed neutron sources
880
development of resource-saving biotechnology for the production of a feed additive from distiller’s wastes with probiotic properties
881
Development of resource-saving technology for excavation of flat-lying coal seams with tight roof rocks (on the example of the Quang Ninh coal basin mines)
882
Development of Responding to Joint Attention in Typically Developing Children Across 9-30 Month
883
Development of response models for optimising HPLC methods
884
Development of response surface model for tensile shear strength of weld-bonds of aluminium alloy 6061 T651
885
Development of restoration trajectory metrics in reforested bottomland hardwood forests applying a rapid assessment approach
886
Development of retort process for ready-to-eat (RTE) soy-peas curry as a meat alternative in multilayer flexible retort pouches
887
Development of retrofittable collision avoiding sensor for industrial robots
888
Development of reverse osmosis desalination membranes composition and configuration: Future prospects Original Research Article
889
Development of reverse transcriptase polymerase chain reaction enzyme-linked immunosorbent assay for the detection of hepatitis A virus in vegetables
890
Development of Reverse-Phase HPLC Method for Simultaneous Analysis of Metoprolol Succinate and Hydrochlorothiazide in a Tablet Formulation
891
Development of revised SAPRC aromatics mechanisms
892
Development of RF acceleration system for 150 MeV FFAG accelerator
893
Development of RF acceleration system for 150 MeV FFAG accelerator
894
Development of RF magnetron sputtering method to fabricate PZT thin film actuator
895
Development of rf plasma sputtered Al2O3–TiO2 multilayer broad band antireflecting coatings and its correlation with plasma parameters
896
Development of RFID-based Reverse Logistics System
897
Development of Rheumatoid Arthritis by Toxoplasmosis in Iranian Patients
898
Development of Rheumatology in Tehran University of Medical Sciences
899
Development of rice bran oil blends for quality improvement
900
Development of rice husks–plastics composites for building materials
901
Development of rice reference material and its use for evaluation of analytical performance of food analysis laboratories
902
Development of rice reference material and its use for evaluation of analytical performance of food analysis laboratories
903
Development of RICH counters towards the KEKB/Belle upgrade
904
Development of RICH counters towards the KEKB/Belle upgrade
905
Development of RICH detectors and large-area hybrid photodiodes for the LHCb experiment
906
Development of RICH detectors and large-area hybrid photodiodes for the LHCb experiment
907
Development of Richtmyer–Meshkov and Rayleigh–Taylor instability in the presence of magnetic field
908
Development of Richtmyer–Meshkov and Rayleigh–Taylor instability in the presence of magnetic field
909
Development of Rigid Biocomposite Polyurethane Foam for Load Bearing Application
910
Development of Rigid Bio-Nanocomposite Polyurethane Foam for Load Bearing Application: Effect of Surfactant Composition
911
Development of Risedronate-Loaded Nano Capsules for Calvaria Healing in Rabbit: Histopathological Assessment
912
Development of risk filter and risk assessment worksheets for HSE guidance—‘Upper Limb Disorders in the Workplace’ 2002
913
Development of risk-based ranking measures of effectiveness for the United States Coast Guardʹs vessel inspection program
914
DEVELOPMENT OF RISK-BASED REMEDIATION STRATEGIES
915
DEVELOPMENT OF RISK-BASED REMEDIATION STRATEGIES
916
Development of Risk-Taking Tendency Tool for High School Students
917
Development of RMPC Algorithm for Compensation of Uncertain Time-Delay and Disturbance in NCS
918
Development of RNA aptamers as molecular probes for HER2+ breast cancer study using cell-SELEX
919
Development of Road Accident Prediction Models for Akure-Owo Highway, Ondo State, Nigeria
920
development of road and bridge infrastructure to enhance economic growth in the coastal communities of tuminting district in manado city
921
Development of Road Maintenance Inventory in UKM by Using Aerial Images
922
Development of road stripe removing equipment using high-pressure water jet
923
development of robot journalism application: tweets of news content in the turkish language shared by a bot
924
Development of robots for use in radioactive environments
925
Development of robust biocompatible silicone with high resistance to protein adsorption and bacterial adhesion
926
Development of robust calibration models in near infra-red spectrometric applications Original Research Article
927
Development of robust Co-based catalysts for the selective H2-production by ethanol steam-reforming. The Fe-promoter effect
928
Development of robust design optimization using incomplete data
929
Development of rodlet cells in the gut of turbot (Psetta maxima L.): Relationship between their morphology and S100 protein immunoreactivity
930
Development of rolled joint detachment system for low enriched uranium based advanced heavy water reactor
931
Development of roping in an aluminum automotive alloy AA6111 Original Research Article
932
Development of rotating disc apparatus for test of sediment-induced erosion in Francis runner blades
933
Development of rotationally consistent diagonal mass matrices for plate and beam elements Original Research Article
934
Development of Roundabout Delay Models Using Traffic Simulation Programs: A Case Study at Al-Mansour City, Iraq
935
Development of ROV based Water Tank Cleaning Robot
936
DEVELOPMENT OF RP-HPLC METHODS FOR THE ESTIMATION OF NEBIVOLOL AND CARVEDILOL WITH SELECTED NSAIDS AND ITS APPLICATION TO DRUG DISPLACEMENT INTERACTION STUDIES
937
Development of RQ Al composites by new process
938
Development of RQ Al composites by new process
939
Development of RTP for industrial solar cell processing
940
Development of RT-PCR Using External and Internal Positive Controls Based on 5' Untranslated Region (UTR) for Molecular Detection of Avian Infectious Bronchitis Virus
941
Development of rudist lithosomes in the Coniacian–Lower Campanian carbonate shelves of central-southern Italy: high-energy vs low-energy settings
942
Development of Rule-Based Software Risk Assessment and Management Method with Fuzzy Inference System
943
Development of Rules and Strategies: Balancing the Old and the New
944
Development of rural libraries in the Solomon Islands
945
Development of Rural Tourism in Iran Using PV-Based System: Finding the Best Economic Configuration
946
Development of Rusnani Concept Mapping (RCM) Protocol Guideline on Academic Performance of Diploma Nursing Students
947
Development of ruthenium-based bimetallic electrocatalysts for oxygen reduction reaction
948
DEVELOPMENT OF Rμ RELATION FOR THE SEISMICALLY BASE ISOLATED STRUCTURES USING MODIFIED ABC ALGORITHM
949
Development of SAFA, a seismic analysis program for FBR core components Original Research Article
950
Development of safer fodder-cutter machines: a case study from north India
951
Development of safety analysis methodology for moderator system failure of CANDU-6 reactor by thermal-hydraulics/physics coupling
952
Development of Safety Improvement Method in City Zones Based on Road Network Characteristics
953
Development of safety profile evaluating pharmacokinetics, pharmacodynamics and toxicity of a combination of pioglitazone and olmesartan medoxomil in Wistar albino rats
954
Development of safety standard for mobile hydrogen refueling facilities in China
955
DEVELOPMENT OF SALT ADAPTATION IN IN VITRO GREATER YAM (DIOSCOREA ALATA) PLANTLETS
956
Development of Salt Induced Liquid–Liquid Extraction Combined with Amine Based Deep Eutectic Solvent-Dispersive Liquid–Liquid Microextraction; An Efficient Analytical Method for Determination of Three Anti-Seizures in Urine Samples
957
Development of salt minibasins initiated by sedimentary topographic relief
958
Development of salt profiles on Manchego type cheese during brining. Influence of vacuum pressure Original Research Article
959
Development of salt-tolerance interface for an high performance liquid chromatography/inductively coupled plasma mass spectrometry system and its application to accurate quantification of DNA samples Original Research Article
960
Development of samarium [32P] phosphate colloid for radiosynoviorthesis applications: Preparation, biological and preliminary clinical studies experience
961
Development of sample handling procedures for foods under USDAʹs National Food and Nutrient Analysis Program
962
Development of sample handling procedures for foods under USDAʹs National Food and Nutrient Analysis Program
963
Development of sample holder for in situ neutron measurement of hydrogen absorbing alloy
964
Development of sample preparation method for eleutheroside B and E analysis in Acanthopanax senticosus by ionic liquids-ultrasound based extraction and high-performance liquid chromatography detection
965
Development of sample preparation method for isoliquiritigenin, liquiritin, and glycyrrhizic acid analysis in licorice by ionic liquids-ultrasound based extraction and high-performance liquid chromatography detection
966
Development of San Leandro synform and neotectonics of the San Francisco Bay block, California
967
Development of sandwich ELISA for detection and quantification of invertebrate major allergen tropomyosin by a monoclonal antibody
968
Development of sandwich enzyme-linked immunosorbent assay systems for plasma β-galactoside α2,6-sialyltransferase, a possible hepatic disease biomarker Original Research Article
969
Development of Sandwich HPLC Microcolumns for Analyte Adsorption on the Millisecond Time Scale
970
Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part I: Conception and pull-out tests
971
Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part II: Evaluation of mechanical behaviour
972
Development of sap compressing systems from oil palm trunk
973
Development of Sarcoidosis in a Patient with Ulcerative Colitis: A Case Report
974
Development of satisfaction curves to evaluate concrete mix design performance using a Bayesian probabilistic method
975
Development of sauce from locally available Hog plum (Spondias dulcis) in Bangladesh
976
Development of SAW-based multi-gas sensor for simultaneous detection of CO2 and NO2
977
Development of SAW-based multi-gas sensor for simultaneous detection of CO2 and NO2
978
Development of scaling laws of heat removal and CFD assessment in concrete cask air path
979
Development of scanning microwave microscope with a lumped-constant resonator probe for high-throughput characterization of combinatorial dielectric materials
980
Development of SCAR markers linked to a scald resistance gene derived from wild barley
981
Development of scattering surfaces for concert halls
982
Development of scenario-based mathematical model for sustainable closed loop supply chain considering reliability of direct logistics elements
983
Development of schistosity by dissolution–crystallization in a Californian serpentinite gouge
984
Development of Scholarship Journals among the Malays
985
development of scientific-based educative multimedia games to improve indonesian narrative writing skills for elementary school students
986
Development of SciFi/CheFi detector with SiPM readout
987
Development of SciFi/CheFi detector with SiPM readout
988
Development of scintillating crystal hybrid photon detectors for the KM3NeT (-scale) deep-sea neutrino telescope
989
Development of scintillating crystal hybrid photon detectors for the KM3NeT (-scale) deep-sea neutrino telescope
990
Development of scintillation detectors based on avalanche microchannel photodiodes
991
Development of scintillation detectors based on avalanche microchannel photodiodes
992
Development of scintillation imaging device for cold neutrons
993
Development of scintillation imaging device for cold neutrons
994
Development of scintillation LXe/LKr electromagnetic calorimeter with wavelength shifting light collection
995
Development of scintillation LXe/LKr electromagnetic calorimeter with wavelength shifting light collection
996
Development of scintillation materials for PET scanners
997
Development of scintillation materials for PET scanners
998
Development of scintillator for a high-frame-rate neutron radiography
999
Development of scintillator for a high-frame-rate neutron radiography
1000
Development of scintillator plates with high energy resolution for alpha particles made of GPS scintillator grains