<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Thermal lens measurements of fluorescence quantum efficiency in Nd3+-doped fluoride glasses
2
Thermal lens probing of distant dependent fluorescence quenching of Rhodamine 6G by silver nanoparticles
3
Thermal lens spectrometric determination of hexavalent chromium
4
Thermal lens study of PbO–Bi2O3–Ga2O3–BaO glasses doped with Yb3+
5
Thermal lensing and absorbance spectra of a fluorescent dye solution
6
Thermal lensing of diode side-pumped solid-state lasers
7
Thermal lensing study on the vibrational relaxation of highly excited chlorofluoroethane
8
Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking
9
Thermal life evaluation of high temperature insulation systems and hybrid insulation systems in mineral oil
10
Thermal limitation of carp (Cyprinus carpio L.) larvae survival in ponds of the temperate climate
11
Thermal limitation of the mean power rating of coaxial transmission lines for ICRH
12
Thermal link for cartridge-type cryostat Original Research Article
13
Thermal load deviation model for superheater and reheater of a utility boiler
14
Thermal load distribution near the tips of the ALT-II limiter roof on TEXTOR-94
15
Thermal load distribution on the ALT-II limiter of TEXTOR-94 during disruptions
16
Thermal load distribution on the ALTII limiter of TEXTOR-94 during RI mode operation and during disruptions
17
Thermal load of tuned piston
18
Thermal load testing of erosion-monitoring beryllium marker tile for the ITER-Like Wall Project at JET
19
Thermal Loading and Material Property Characterization of a Functionally Graded Plate With a Hole Using an Inverse Problem Methodology
20
Thermal Loading as a Causal Factor in Exceeding the 0.1 PPM Laboratory Fume Hood Control Level
21
Thermal loading in multi-layered and/or functionally graded materials: Residual stress field, delamination, fatigue and related size effects
22
Thermal loading induced near-infrared broadband upconversion emission of Sm3+-doped β-NaYbF4 nano-phosphors
23
Thermal loading of smectite-rich rocks: Natural processes vs. laboratory experiments
24
Thermal loading studies using the Yucca Mountain unsaturated zone model
25
Thermal Loads and Surface Quality Evaluation in Machining of Hardened Die Steel under Dry and Cryogenic Machining
26
Thermal localization as a potential mechanism to rift cratons
27
Thermal loss of life and load-carrying capacity of marine induction motors
28
Thermal low spin–high spin equilibrium of Fe(II) in thiospinels CuFe0.5(Sn(1−x)Tix)1.5S4 (0≤x≤1)
29
Thermal luminescence spectra of lysine and phenylalanine in O2 measured with a Fourier-transform chemiluminescence spectrometer
30
Thermal magnetic investigation of the decomposition of NixMn1−xC2O4·2H2O
31
Thermal magnetic investigation of the decomposition of NixMn1−xC2O4·2H2O
32
Thermal magnetic properties of Fe films on Cu3Au investigated by magneto optical Kerr effect
33
Thermal management and desorption modeling of a cryo-adsorbent hydrogen storage system
34
Thermal Management for Semiconductor Devices with Conductive Polymers
35
Thermal Management in Catalytic Microreactors
36
Thermal management issues in a PEMFC stack – A brief review of current status
37
Thermal management of a multiple mini-channel heat sink by the integration of a thermal responsive shape memory material
38
Thermal management of a PEMFC stack by 3D nodal modeling
39
Thermal management of a proton exchange membrane fuel cell stack with pyrolytic graphite sheets and fans combined
40
Thermal management of an independent steam reformer for a solid oxide fuel cell with constrained generalized predictive control
41
Thermal management of BioMEMS: temperature control for ceramic-based PCR and DNA detection devices
42
Thermal management of electronic components with thermal adaptation composite material
43
Thermal management of high power electronics with phase change cooling
44
Thermal management of high temperature polymer electrolyte membrane fuel cell stacks in the power range of 1–10 kWe
45
Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation
46
Thermal management of microelectronics with electrostatic fluid accelerators
47
Thermal management of power electronics modules packaged by a stacked-plate technique
48
Thermal management of power electronics modules packaged by a stacked-plate technique
49
Thermal management oriented steady state analysis and optimization of a kW scale solid oxide fuel cell stand-alone system for maximum system efficiency
50
Thermal management strategy for a proton exchange membrane fuel cell system with a large active cell area
51
Thermal management using the bi-disperse porous medium approach
52
Thermal manipulation of carbon nanotube fiber by mechanical stretching
53
Thermal mapping and trends of Mars analog materials in sample acquisition operations using experimentation and models
54
Thermal mapping of a scanning thermal microscopy tip
55
Thermal mapping of a scanning thermal microscopy tip
56
Thermal Marangoni Convection of Two-phase Dusty Fluid Flow along a Vertical Wavy Surface
57
Thermal Marangoni flows and macroscopic domain movement in monolayer surface potential experiments
58
Thermal markers arising from changes in the protein component of milk
59
Thermal mass activation by hollow core slab coupled with night ventilation to reduce summer cooling loads
60
Thermal mass and night ventilation as passive cooling design strategy
61
Thermal mass shift of nucleons
62
Thermal maturation, potential source rocks and hydrocarbon generation in Mesozoic rocks, Lougheed Island area, Central Canadian Arctic archipelago
63
Thermal maturity evaluation by sonic log and seismic velocity analysis in parts of Upper Assam Basin, India
64
Thermal maturity history and petroleum generation modelling for the Upper Jurassic Madbi source rocks in the Marib-Shabowah Basin, western Yemen
65
Thermal maturity in the Central European Basin system (Schleswig-Holstein area): results of 1D basin modelling and new maturity maps
66
Thermal maturity in the Shimanto accretionary prism, southwest Japan, with the thermal change of the subducting slab: fluid inclusion and vitrinite reflectance study
67
Thermal maturity in the Shimanto accretionary prism, southwest Japan, with the thermal change of the subducting slab: fluid inclusion and vitrinite reflectance study
68
Thermal maturity of northern Appalachian Basin Devonian shales: Insights from sterane and terpane biomarkers
69
Thermal maturity of type II kerogen from the New Albany Shale assessed by 13C CP/MAS NMR
70
Thermal Maturity, Organic Petrography, Bulk and Compositional Kinetic of Hydrocarbon Generation in Cretaceous-Paleogene Source Rocks from Western Dezful Embayment, SW Iran
71
THERMAL MEASUREMENT ASSOCIATED WITH MATERIAL FAILURE USING THERMOCHROMIC COATINGS
72
Thermal measurement induced disturbance in the Bose-Hubbard Hamiltonian
73
Thermal measurements of curdlan in aqueous suspension during gelation
74
Thermal measurements of dark and bright surface features on Vesta as derived from Dawn/VIR
75
Thermal mechanical analysis of a solid breeding blanket
76
Thermal mechanical analysis of the Enhanced Heat Flux First Wall panel
77
Thermal mechanical anisotropic constitutive model and numerical simulations for shocked β-HMX single crystals
78
Thermal mechanical behavior and microstructure characteristic of microalloyed CrMo steel under cross deformation
79
Thermal Mechanical Stretching to Imprint Pores Morphology of Nitrocellulose Membrane for Immuno- sensing Application
80
Thermal mechanisms in laser ablation of GaAs
81
Thermal melting of solid materials induced by ultrafast laser pulse irradiation as explosively homogeneous nucleation
82
Thermal memory effects modeling and compensation in RF power amplifiers and predistortion linearizers
83
Thermal metamorphism in the lesser Himalaya of Nepal determined from Raman spectroscopy of carbonaceous material
84
Thermal methods for evaluating polymorphic transitions in nifedipine
85
Thermal methods of analysis, principles, applications and problems: Peter J. Haines, Blackie, London, 1995 (ISBN 0-7514-0050-5). 286 pp. Price £ 26.00.
86
Thermal microstress measurements in Al2O3/SiC nanocomposites by Cr3+ fluorescence microscopy
87
Thermal microstructural stability of AZ31 magnesium after severe plastic deformation
88
Thermal mismatch induced disorder of beta-eucryptite and its effect on thermal expansion of beta-eucryptite/Al composites
89
Thermal mismatch stress development in Cu–ZrW2O8 composite investigated by synchrotron X-ray diffraction
90
Thermal mismatch stress of a cylindrical inclusion in a cubic crystal
91
Thermal mixing in a water tank during heating process
92
Thermal mixing of the cross flow over tube bundles
93
Thermal model design and analysis of the high-power LED automotive headlight cooling device
94
Thermal model for curing implantable silicone in the moulding process applied to tracheal stents
95
Thermal model for nanosecond laser sputtering at high fluences
96
Thermal model of a dish/Stirling systems
97
Thermal Model of High-Speed Spindle Units
98
Thermal model of human body fitted with individual characteristics of body temperature regulation
99
Thermal model of Mercury’s surface and subsurface: Impact of subsurface physical heterogeneities on the surface temperature Original Research Article
100
Thermal model of the MUPUS penetrator
101
Thermal model of water and CO activity of Comet C/1995 O1 (Hale-Bopp)
102
Thermal model to investigate the temperature in bone grinding for skull base neurosurgery
103
Thermal modeling and analysis of a quasi-poloidal stellarator modular coil
104
Thermal modeling and design considerations of lithium-ion batteries
105
Thermal modeling and design for microchannel cold plate with high temperature uniformity subjected to multiple heat sources
106
Thermal modeling and experimentation to determine maximum power capability of SCRʹs and thyristors
107
Thermal modeling and organic geochemical appraisal of petroleum source rocks within the Aghajari Oilfield, SW Iran
108
Thermal modeling and parametric studies of a greenhouse fish pond in the Central Himalayan Region
109
Thermal modeling and performance analysis of industrial-scale metal hydride based hydrogen storage container
110
THERMAL MODELING AND PERFORMANCE ANALYSIS OF INTERIM DRY STORAGE AND GEOLOGIC DISPOSAL FACILITIES FOR SPENT NUCLEAR FUEL
111
Thermal modeling and temperature control of a PEM fuel cell system for forklift applications
112
Thermal modeling based on solar fraction and experimental study of the annual and seasonal performance of a single slope passive solar still: The effect of water depths Original Research Article
113
Thermal modeling during continuous ultrasonic welding
114
Thermal modeling for greenhouse heating by using thermal curtain and an earth–air heat exchanger
115
Thermal Modeling for Predication of Automobile Cabin Air Temperature
116
Thermal modeling for the motor in semi-hermetic screw refrigeration compressors under part-load conditions
117
Thermal modeling for thermophotovoltaic systems adopting the radiation network method
118
Thermal modeling of a combined system of photovoltaic thermal (PV/T) solar water heater
119
Thermal modeling of a controlled environment greenhouse cum solar distillation for composite and warm humid climates of India Original Research Article
120
Thermal modeling of a greenhouse integrated to an aquifer coupled cavity flow heat exchanger system
121
Thermal modeling of a greenhouse with an integrated earth to air heat exchanger: an experimental validation
122
Thermal modeling of a natural convection greenhouse drying system for jaggery: An experimental validation
123
Thermal modeling of a packed bed thermal energy storage system during charging
124
Thermal modeling of a small anode supported solid oxide fuel cell
125
Thermal modeling of a solid oxide fuel cell and micro gas turbine hybrid power system based on modified LS-SVM
126
Thermal modeling of activated carbon based adsorptive natural gas storage system Original Research Article
127
Thermal modeling of Carboniferous to Triassic sediments of the Karawanken Range (Southern Alps) as a tool for paleogeographic reconstructions in the Alpine-Dinaridic-Pannonian realm
128
Thermal modeling of chemical vapor deposition on the particle surface subjected to nanosecond laser heating
129
Thermal modeling of controlled atmosphere brazing process using virtual reality technology
130
Thermal modeling of cylindrical lithium ion battery during discharge cycle
131
Thermal modeling of gas engine driven air to water heat pump systems in heating mode using genetic algorithm and Artificial Neural Network methods
132
Thermal modeling of LmNi4.91Sn0.15 based solid state hydrogen storage device with embedded cooling tubes
133
Thermal Modeling of Lundell Alternators
134
Thermal Modeling of Mini-Channel and Laminated TypesEvaporator in Mobile Air Conditioning System
135
Thermal modeling of passive and active solar stills for different depths of water by using the concept of solar fraction
136
Thermal modeling of power transformers using evolving fuzzy systems
137
Thermal modeling of power transformers using evolving fuzzy systems
138
Thermal modeling of radiation and convection sections of primary reformer of ammonia plant
139
Thermal modeling of railroad with installed snow melting system
140
Thermal modeling of roadway embankments over permafrost
141
Thermal modeling of secondary lithium batteries for electric vehicle/hybrid electric vehicle applications
142
Thermal modeling of selective area laser deposition of titanium nitride on a finite slab with stationary and moving laser beams
143
Thermal Modeling of Snake Infrared Reception: Evidence for Limited Detection Range
144
Thermal modeling of solar stills: an experimental validation
145
Thermal Modeling of Steady State Contact Resistance Between Two Dissimilar Materials
146
Thermal modeling of strip across the transfer table in the hot rolling process
147
Thermal modeling of subducted plates: tear and hotspot at the Kamchatka corner
148
Thermal modeling of the Clear Lake magmatic-hydrothermal system, California, USA
149
Thermal modeling of the forced convection Sandwich Greenhouse drying system for rubber sheets
150
Thermal modeling of the metal cutting process — Part II: temperature rise distribution due to frictional heat source at the tool–chip interface
151
Thermal modeling of the metal cutting process — Part II: temperature rise distribution due to frictional heat source at the tool–chip interface
152
Thermal modeling of the metal cutting process — Part II: temperature rise distribution due to frictional heat source at the tool–chip interface
153
Thermal modeling of the metal cutting process — Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source
154
Thermal modeling of the metal cutting process — Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source
155
Thermal modeling of the metal cutting process — Part III: temperature rise distribution due to the combined effects of shear plane heat source and the tool–chip interface frictional heat source
156
Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source
157
Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source
158
Thermal modeling of the metal cutting process: Part I — Temperature rise distribution due to shear plane heat source
159
Thermal modeling of the UHP Maksyutov Complex in the south Urals
160
Thermal modeling of vacuum web coating
161
Thermal modeling of various thermal barrier coatings in a high heat flux rocket engine
162
Thermal modeling of W rod armor
163
Thermal modelling for electrical machines fed with low voltage: First approach of a reliability model Original Research Article
164
Thermal modelling of a building with an integrated ventilated PV façade
165
Thermal modelling of a double condensing chamber solar still: an experimental validation
166
Thermal modelling of a photovoltaic module under variable free convection conditions
167
Thermal Modelling of a Solar Air Heater for All Over the Year of Yazd Province
168
Thermal modelling of an axial flux permanent magnet machine
169
Thermal modelling of end milling
170
Thermal modelling of large scale exploitation of ground source energy in urban aquifers as a resource management tool
171
Thermal modelling of laser welding and related processes: a literature review
172
Thermal modelling of the cathode in air-breathing PEM fuel cells
173
Thermal modelling of the Laramide orogeny: testing the flat-slab subduction hypothesis
174
Thermal modelling of the Larderello geothermal field (Tuscany, Italy)
175
Thermal modelling of the lemon-bore hydrodynamic bearing
176
Thermal modelling of the multi-stage heating system with variable boundary conditions in the wafer based precision glass moulding process
177
Thermal models for bobbin tool friction stir welding
178
Thermal models of dyke intrusion during development of continent–ocean transition
179
Thermal models of railroad wheels and bearings
180
Thermal modes of bimolecular exothermic reactions: Concentration limits of ignition
181
Thermal modes of monomolecular exothermic reactions: Two-dimensional model
182
Thermal modification of bottomonium spectra from QCD sum rules with the maximum entropy method
183
Thermal modification of collagen
184
Thermal modification of layer-by-layer assembled gold nanoparticle films
185
Thermal modified Kaolinite as useful material for separation and preconcentration of trace amounts of manganese ions
186
Thermal modulation of the monomer/excimer fluorescence for bispyrene molecules through the gel–solution transition of an organogel: A thermo-driven molecular fluorescence switch
187
Thermal molecular motion at surface of atactic polypropylene films
188
Thermal molecule and atom test of the modified special relativity theory
189
Thermal monitoring and indoor temperature predictions in a passive solar building in an arid environment
190
Thermal monitoring for control of adsorptive based clean-up in water treatment
191
Thermal monitoring of phenoxyacid herbicide adsoprtion on granular activated carbon
192
Thermal mud-pack as an anti-inflammatory treatment
193
Thermal muds: Perspectives of innovations
194
Thermal negativity in a two qubit XXX and XX spin chain model in an external magnetic field
195
Thermal neutron absorption cross section and clay mineral content for Miocene Carpathian samples
196
Thermal neutron capture cross-section measurements of 243Am and 242Pu using the new mini-INCA - and -spectroscopy station
197
Thermal neutron capture cross-section measurements of 243Am and 242Pu using the new mini-INCA - and -spectroscopy station
198
Thermal neutron capture cross-section of 48Ti, 51V, 50,52,53Cr and 58,60,62,64Ni
199
Thermal neutron cross sections for moderator materials: comparison of a synthetic scattering function and NJOY results
200
Thermal neutron cross-section and resonance integral for 164Dy(n,γ)165Dy reaction
201
Thermal neutron cross-section and resonance integral for 164Dy(n,γ)165Dy reaction
202
Thermal neutron cross-sections of magnesium
203
Thermal neutron damage in DMILL bipolar transistors
204
Thermal neutron damage in DMILL bipolar transistors
205
Thermal neutron detection at outer electrode surfaces of composite polycrystalline B, BN, B4C and LiF through air ionization
206
Thermal neutron detection at outer electrode surfaces of composite polycrystalline B, BN, B4C and LiF through air ionization
207
Thermal neutron detection using pyroelectric ceramics together with boron converters
208
Thermal neutron detection with cadmium1−x zincx telluride semiconductor detectors
209
Thermal neutron detection with cadmium1−x zincx telluride semiconductor detectors
210
Thermal neutron detection with Ce3+ doped LiCaAlF6 single crystals
211
Thermal neutron detection with Ce3+ doped LiCaAlF6 single crystals
212
Thermal neutron detection with pyrolytic boron nitride
213
Thermal neutron detection with pyrolytic boron nitride
214
Thermal neutron detectors based on complex oxide crystals
215
Thermal neutron detectors based on complex oxide crystals
216
Thermal neutron diffusion cooling in wet quartz: (Monte Carlo simulations of the pulsed neutron experiments)
217
Thermal Neutron Diffusion in an Array of Plates
218
Thermal neutron fluence from ultra low-level γ-ray spectrometry of spoons activated during the JCO criticality accident at Tokai-mura in 1999
219
Thermal neutron flux mapping in a head phantom
220
Thermal neutron flux mapping in a head phantom
221
Thermal neutron flux measurements in the STAR experimental hall
222
Thermal neutron flux measurements in the STAR experimental hall
223
Thermal neutron imaging with CsBr storage phosphors
224
Thermal neutron imaging with CsBr storage phosphors
225
Thermal neutron imaging with rare-earth-ion-doped LiCaAlF6 scintillators and a sealed 252Cf source
226
Thermal neutron imaging with rare-earth-ion-doped LiCaAlF6 scintillators and a sealed 252Cf source
227
Thermal neutron measurements of the Rhode Island Nuclear Science Center reactor after conversion to a compact low enriched uranium core
228
Thermal neutron reflection method for measurement of total hydrogen contents in Ghanaian petroleum products
229
Thermal neutron response and theoretical comparison of LiF coated aluminized Mylar
230
Thermal neutron response and theoretical comparison of LiF coated aluminized Mylar
231
Thermal neutron scattering by debye solids: a synthetic scattering function
232
Thermal neutron stars including the hyperon-hyperon interactions Original Research Article
233
Thermal neutrons’ response to the GLEs Original Research Article
234
Thermal NF3 fluorination/oxidation of cobalt, yttrium, zirconium, and selected lanthanide oxides
235
Thermal nitridation of chromium electroplated AISI316L stainless steel for polymer electrolyte membrane fuel cell bipolar plate
236
Thermal nitridation synthesis of MN (M=Ti, V and Cr) nanocrystals from metals and NH4Cl
237
Thermal nociception as a measure of non-steroidal anti-inflammatory drug effectiveness in broiler chickens with articular pain
238
Thermal Noise and Correlations in Photon Detection
239
Thermal noise from optical coatings in gravitational wave detectors
240
Thermal noise limit in the Virgo mirror suspension
241
Thermal noise limit in the Virgo mirror suspension
242
Thermal noise reduction for present and future gravitational wave detectors
243
Thermal noise reduction for present and future gravitational wave detectors
244
Thermal noise reduction of mechanical oscillators by actively controlled external dissipative forces
245
Thermal noise reduction of mechanical oscillators by actively controlled external dissipative forces
246
Thermal noise reduction of mechanical oscillators by actively controlled external dissipative forces
247
Thermal non-equilibrium modeling of heat transfer through vertical annulus embedded with porous medium
248
Thermal non-linear stresses in an adhesively bonded and laser-spot welded single-lap joint during laser–metal interaction
249
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part I. Analysis of Regularities
250
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part I. Analysis of Regularities
251
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part II. Interpretation
252
Thermal O^++ Ions according to Mass-Spectrometer Data Obtained from the lnterkosmos-24 and lnterkosmos-25 Satellites. Part II. Interpretation
253
Thermal observations associated with the Portevin–Le Châtelier effect in an Al–Mg alloy
254
Thermal observations of degassing open conduits and fumaroles at Stromboli and Vulcano using remotely sensed data
255
Thermal observations of MUSES-C mission target (25143) 1998 SF 36
256
Thermal observations of Saturnʹs main rings by Cassini CIRS: Phase, emission and solar elevation dependence
257
Thermal OH (1667/1665 MHz) Absorption and Nonthermal OH (1720 MHz) Emission toward the W28 Supernova Remnant
258
Thermal optimisation of polymer extrusion using in-process monitoring techniques
259
Thermal optimization in transient thermoelasticity using response surface approximations
260
Thermal Optimization of an Array of Needle-Shaped using Constructal Theory
261
Thermal Optimization of an Array of Needle-Shaped using Constructal Theory
262
Thermal optimization of PCM based pin fin heat sinks: An experimental study
263
Thermal optimization of plate-fin heat sinks with fins of variable thickness under natural convection
264
Thermal optimization of plate-fin heat sinks with variable fin thickness
265
Thermal optimization of polybenzimidazole meniscus membranes for the separation of hydrogen, methane, and carbon dioxide
266
Thermal Optimization of the Sealed Air Layer Thickness in Transparent Film Covers of Semicylindrical Solar Greenhouses and Warm Beds
267
Thermal oscillation and resonance in dual-phase-lagging heat conduction
268
Thermal oscillations effects in surface layers of Fe–Ni system: the role of atomic and magnetic ordering
269
Thermal overload tests on a 400-MVA power transformer with a special 2.5-p.u. Short time loading
270
Thermal overload tests on a 400-MVA power transformer with a special 2.5-p.u. Short time loading capability
271
Thermal oxidation behavior of ceramic-coated Ni–Cr-base superalloys
272
Thermal oxidation behavior of hexagonal BC2N
273
Thermal oxidation behavior of WC–Co hard metal machining tool tip scraps
274
Thermal oxidation effect on corrosion behavior of Zr46Cu37.6Ag8.4Al8 bulk metallic glass
275
Thermal oxidation kinetics and oxide scale adhesion of Fe–15Cr alloys as a function of their silicon content Original Research Article
276
Thermal oxidation kinetics of an Si1−xCx alloy layer (x ≃ 0.1) on Si(0 0 1) surfaces monitored in real time by RHEED combined with AES
277
Thermal oxidation of AlGaAs: modeling and process control
278
Thermal oxidation of As and Ge implanted Si(1 0 0)
279
Thermal oxidation of cellulose investigated by chemiluminescence. The effect of water at temperatures above 100 °C
280
Thermal oxidation of chloroform
281
Thermal oxidation of cleft surface of InSe single crystal
282
Thermal oxidation of cleft surface of InSe single crystal
283
Thermal oxidation of covellite (CuS)
284
Thermal oxidation of CP Ti — An electrochemical and structural characterization
285
Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time
286
Thermal oxidation of outdiffusing SiO with permeating 0, in a SiO, film studied by angle-resolved X-ray photoelectron spectroscopy
287
Thermal oxidation of oxynitride perovskites in different atmospheres
288
Thermal oxidation of single crystalline aluminum nitride
289
Thermal oxidation of strained Si/SiGe: impact of surface morphology and effect on MOS devices
290
Thermal oxidation of the hydrogenated diamond (1 0 0) surface
291
Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization
292
Thermal oxidation of titanium to improve corrosion resistance in boiling nitric acid medium
293
Thermal oxidation of titanium: Evaluation of corrosion resistance as a function of cooling rate
294
Thermal oxidation of two malonamides, extractants for minor actinides in nuclear fuel reprocessing
295
Thermal oxidation of vanadium-free Ti alloys: An X-ray photoelectron spectroscopy study
296
Thermal oxidation of vanillin affects its antioxidant and antimicrobial properties
297
Thermal oxidation synthesis hollow MoO3 microspheres and their applications in lithium storage and gas-sensing
298
Thermal oxidation temperature dependence of 4H-SiC MOS interface
299
Thermal Oxidation Times Effect on Structural and Morphological Properties of Molybdenum Oxide Thin Films Grown on Quartz Substrates
300
Thermal oxidation treatment of B2 iron aluminide for improved wear resistance
301
Thermal oxidation-grown vanadium dioxide thin films on FTO (Fluorine-doped tin oxide) substrates
302
Thermal oxidative cutting of multi-walled carbon nanotubes Original Research Article
303
Thermal oxidative degradation behaviours of flame-retardant thermotropic liquid crystal copolyester/PET blends
304
Thermal oxidative process in extra-virgin olive oils studied by FTIR, rheology and time-resolved luminescence
305
Thermal pairing in Richardson model Original Research Article
306
Thermal parameter components of building envelope
307
Thermal particle production at SIS?
308
Thermal partition function of superstring on compactified pp-wave Original Research Article
309
Thermal patterns on a heated wall in vertical air–water flow
310
Thermal peculiarities of the electric mode formation of high temperature superconductors with the temperature-decreasing n-value Original Research Article
311
Thermal perception, adaptation and attendance in a public square in hot and humid regions
312
Thermal perceptions, general adaptation methods and occupantʹs idea about the trade-off between thermal comfort and energy saving in hot–humid regions
313
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator - part I
314
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator - part I
315
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator—Part II
316
Thermal performance analysis and measurements of the prototype cryomodules of European XFEL accelerator—Part II
317
Thermal performance analysis and optimum design parameters of heat exchanger having perforated pin fins
318
Thermal performance analysis for a heat receiver using multiple phase change materials
319
Thermal performance analysis for solid and perforated blocks attached on a flat surface in duct flow
320
Thermal performance analysis of a flat slab phase change thermal storage unit with liquid-based heat transfer fluid for cooling applications
321
Thermal performance analysis of a solar water heating system with heat pipe evacuated tube collector using data from a field trial
322
Thermal performance analysis of an electrochromic vacuum glazing with low emittance coatings
323
Thermal performance analysis of closed wet cooling towers under both unsaturated and supersaturated conditions
324
THERMAL PERFORMANCE ANALYSIS OF CONVECTIVE-RADIATIVE FIN WITH TEMPERATURE-DEPENDENT THERMAL CONDUCTIVITY IN THE PRESENCE OF UNIFORM MAGNETIC FIELD USING PARTIAL NOETHER METHOD
325
THERMAL PERFORMANCE ANALYSIS OF GLAZED and UNGLAZED RECEIVER OF SCHEFFLER DISH
326
Thermal performance analysis of intermediate fluid vaporizer for liquefied natural gas
327
Thermal performance analysis of porous media receiver with concentrated solar irradiation
328
Thermal performance analysis of porous-microchannel heat sinks with different configuration designs
329
Thermal performance analysis of reciprocating compressor with stepless capacity control system
330
Thermal performance analysis of the glass evacuated tube solar collector with U-tube
331
Thermal performance analysis of vacuum variable-temperature blackbody system
332
Thermal performance analysis on a two composite material honeycomb heat regenerators used for HiTAC burners
333
Thermal performance analysis on unit tube for heat pipe receiver
334
Thermal performance and 3D analysis of advanced mechanically joined divertor plate for LHD under steady state high heat flux
335
Thermal performance and capillary limit of a ceramic wick applied to LHP and CPL
336
Thermal Performance and Efficiency Enhancement in Evacuated Tube Solar Collectors Using Various Nanofluids
337
Thermal performance and efficiency of convective–radiative T-shaped fins with temperature dependent thermal conductivity, heat transfer coefficient and surface emissivity
338
Thermal performance and embodied energy analysis of a passive house – Case study of vault roof mud-house in India
339
Thermal performance and energy saving effect of water-loop heat pump systems with geothermal
340
Thermal performance and exergy analysis of a thermal vapor compression desalination system
341
Thermal performance and flow instabilities in a multi-channel, helium-cooled, porous metal divertor module
342
Thermal performance and ground temperature of vertical pile-foundation heat exchangers: A case study
343
Thermal Performance and Heat Dynamics Energy and Exergy of Integrated Asphalt Collector Storage: Sources of Thermal Energy, and Thermoelectric Energy
344
Thermal performance and operational attributes of the startup characteristics of flat-shaped heat pipes using nanofluids
345
Thermal performance and optimum insulation thickness of building walls with different structure materials
346
Thermal performance and pressure drop of the helical-coil heat exchangers with and without helically crimped fins
347
Thermal performance assessment of turbulent channel flows over different shaped ribs
348
Thermal performance behavior of a domestic hot water solar storage tank during consumption operation
349
Thermal performance characteristics of a microcombustor for heating and propulsion
350
Thermal performance characterization of a photovoltaic driven domestic refrigerator
351
Thermal performance comparison between radially rotating ribbed parallelogram channels with and without dimples
352
Thermal performance enhancement in a heat exchanger tube fitted with inclined vortex rings
353
Thermal Performance Enhancement In Double Pipe Heat Exchanger By Using Inward and Outward Dimple and Corrugated Tape
354
Thermal performance enhancement of automobile radiator using water‐CuO nanofluid: an experimental study
355
Thermal performance enhancement of grooved heat pipes with inner surface treatment
356
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
357
THERMAL PERFORMANCE ENHANCEMENT OF THERMOSYPHON HEAT PIPE WITH BINARY WORKING FLUIDS
358
THERMAL PERFORMANCE ENHANCEMENT OF THERMOSYPHON HEAT PIPE WITH BINARY WORKING FLUIDS
359
Thermal performance estimation for ventilated PV facades
360
Thermal performance evaluation of a conical solar water heater integrated with a thermal storage system
361
Thermal performance evaluation of a latent heat storage unit for late evening cooking in a solar cooker having three reflectors
362
Thermal performance evaluation of a low-cost housing prototype made with plywood panels in Southern Brazil
363
Thermal performance evaluation of a prefabricated fiber-reinforced plastic building envelope system
364
THERMAL PERFORMANCE EVALUATION OF A PROPOSED POINT-FOCUS SOLAR COLLECTOR FOR LOW POWER APPLICATIONS
365
Thermal performance evaluation of an energy and environmental research center building during winter
366
Thermal performance evaluation of heat exchangers fitted with twisted-ring turbulators
367
Thermal performance evaluation of precast concrete three-wythe sandwich wall panels
368
THERMAL PERFORMANCE EVALUATION OF RENEWABLE HYBRID ENERGY SOURCES FOR HEATING GREENHOUSES
369
Thermal performance improvement by injecting air into water flow
370
Thermal Performance Improvement of Double Pass Solar Air Heater
371
Thermal performance improvement with scale imprints over boiling surface of two-phase loop thermosyphon at sub-atmospheric conditions
372
Thermal performance in circular tube fitted with coiled square wires
373
Thermal performance indicators for refrigerated road vehicles
374
Thermal performance investigation of double pass-finned plate solar air heater
375
Thermal performance investigation of several types of vertical ground heat exchangers with different operation mode
376
Thermal performance measurement of heat sinks with confined impinging jet by infrared thermography
377
Thermal performance modeling of NASA’s scientific balloons Original Research Article
378
Thermal performance of a 61-cell Si-drift detector module with thermoelectric cooler
379
Thermal performance of a 61-cell Si-drift detector module with thermoelectric cooler
380
Thermal performance of a box-type solar cooker with outer-inner reflectors
381
Thermal performance of a closed advanced two-phase thermosyphon loop for cooling of radio base stations at different operating conditions
382
Thermal performance of a commercial alkaline water electrolyzer: Experimental study and mathematical modeling
383
Thermal performance of a controlled cooling system for low-level optical signals
384
Thermal performance of a cubic cavity with a solar control coating deposited to a vertical semitransparent wall
385
Thermal Performance of a Double-Pass Solar Air Heater
386
Thermal performance of a heat pipe with nanoparticles coated wick
387
Thermal Performance of a Helical Coil Heat Exchanger Utilizing Nanofluids: A Review
388
Thermal performance of a high conductive shape-stabilized thermal storage material
389
Thermal performance of a meso-scale liquid-fuel combustor
390
Thermal performance of a micro combustor with heat recirculation
391
Thermal performance of a micro heat exchanger (MHE) working with zirconia‑based nanofuids for industrial cooling
392
Thermal performance of a micro-combustor for micro-gas turbine system
393
Thermal performance of a modified ammonia–water power cycle for reclaiming mid/low-grade waste heat
394
Thermal performance of a multi-block heat exchanger designed on the basis of Bejan’s constructal theory
395
Thermal performance of a multiple PCM thermal storage unit for free cooling
396
Thermal performance of a novel air conditioning system using a liquid desiccant
397
Thermal performance of a novel heat transfer fluid containing multiwalled carbon nanotubes and microencapsulated phase change materials
398
Thermal performance of a novel linear cavity absorber for parabolic trough solar concentrator
399
Thermal performance of a novel porous crack composite wick heat pipe
400
Thermal performance of a novel rooftop solar micro-concentrating collector
401
Thermal performance of a packed bed double-pass solar air heater
402
Thermal Performance of a Parabolic Trough Solar Concentrator Coupled with a Modified Flat Plate Collector for Greenhouse Heating
403
Thermal performance of a pcm storage unit
404
Thermal performance of a personalized ventilation air terminal device at two different turbulence intensities
405
Thermal performance of a pipe in pipe heat exchanger with sinusoidal inner pipe
406
Thermal performance of a premixed impinging circular flame jet array with induced-swirl
407
Thermal performance of a residential desuperheater/water heater system
408
Thermal performance of a shallow solar-pond integrated with a baffle plate
409
Thermal performance of a simple design solar air heater with built-in thermal energy storage system
410
Thermal performance of a simple design solar air heater with built-in thermal energy storage system
411
Thermal performance of a single basin solar still with PCM as a storage medium
412
Thermal performance of a single-basin solar still integrated with a shallow solar pond
413
Thermal performance of a single-sloped basin still with an inherent built-in additional condenser Original Research Article
414
Thermal performance of a solar cooker based on an evacuated tube solar collector with a PCM storage unit
415
Thermal performance of a solar cooker integrated vacuum-tube collector with heat pipes containing different refrigerants
416
Thermal performance of a solar pressure cooker based on evacuated tube solar collector
417
Thermal performance of a tapered store containing tubes of phase change material: Cooling cycle
418
Thermal performance of a trapezoidal-shaped solar collector/energy store
419
Thermal performance of a triple-basin solar still Original Research Article
420
Thermal performance of a two-phase thermosyphon energy storage system
421
Thermal performance of a variable capacity direct expansion solar-assisted heat pump
422
Thermal performance of a vegetated cladding system on facade walls
423
Thermal performance of a water-phase change material solar collector
424
Thermal performance of air-conditioned office buildings constructed with inclined walls in different climates in China
425
Thermal performance of Al2O3/water nanofluid in a natural circulation loop with a mini-channel heat sink and heat source
426
Thermal performance of aluminum-foam heat sinks by forced air cooling
427
Thermal performance of an active single basin solar still (ASBS) coupled to shallow solar pond (SSP) Original Research Article
428
Thermal performance of an air solar collector with an absorber plate made of recyclable aluminum cans
429
Thermal performance of an electrochromic vacuum glazing
430
Thermal performance of an innovative roof component
431
Thermal performance of an integrated collector storage solar water heater (ICSSWH) with phase change materials (PCM)
432
Thermal performance of an open thermosyphon using nanofluid for evacuated tubular high temperature air solar collector
433
Thermal performance of an open thermosyphon using nanofluids for high-temperature evacuated tubular solar collectors Part 1: Indoor experiment
434
Thermal performance of an oscillating heat pipe with Al2O3–water nanofluids
435
Thermal performance of an overhead transmission line under the influence of dust accumulation
436
Thermal performance of artificially roughened solar air heaters
437
Thermal performance of automotive aluminium plate radiator
438
Thermal performance of bedrooms in a multi-storey residential building in southern Brazil
439
Thermal performance of building element containing phase change material (PCM) integrated with ventilation system – An experimental study
440
Thermal performance of building roof elements
441
Thermal performance of circular convective–radiative porous fins with different section shapes and materials
442
Thermal performance of cold storage in thermal battery for air conditioning
443
Thermal performance of combined solar and pellet heating systems
444
Thermal Performance of Convective-Radiative Transfer Longitudinal Moving Rod with Variable Thermal Conductivity
445
Thermal performance of courtyard buildings
446
Thermal performance of cross flow cooling towers in variable wet bulb temperature
447
Thermal performance of different planting substrates and irrigation frequencies in extensive tropical rooftop greeneries
448
Thermal performance of different pond cells under actual climatic conditions in Qatar
449
Thermal performance of different working fluids in a dual diameter circular heat pipe
450
Thermal performance of dimpled surfaces in laminar flows
451
Thermal performance of direct-flow coaxial evacuated-tube solar collectors with and without a heat shield
452
Thermal performance of envelope wall/roofs of intermittent air-conditioned rooms
453
Thermal performance of flat plate solar collector using various arrangements of compound honeycomb
454
Thermal performance of flat vapor chamber heat spreader
455
Thermal performance of flat-shaped heat pipes using nanofluids
456
Thermal performance of flip chip packages: Numerical study of thermo-mechanical interactions
457
THERMAL PERFORMANCE OF FORCED DRAFT COUNTER FLOW WET COOLING TOWER WITH EXPANDED WIRE MESH PACKING
458
Thermal performance of gas-filled flat plate solar collectors
459
Thermal performance of greenhouses with a built-in solar distillation system: experimental study Original Research Article
460
Thermal Performance of HAVC System Using Heat Pipe Heat Exchanger
461
Thermal performance of heat spreader for electronics cooling with incorporated phase change material
462
Thermal performance of high brightness LED array package on PCB
463
Thermal performance of horizontal closed-loop oscillating heat pipes
464
Thermal performance of in-line diamond-shaped pin fins in a rectangular duct
465
Thermal performance of insulated roof slabs in tropical climates
466
Thermal performance of integrated collector storage solar water heater with corrugated absorber surface
467
Thermal Performance of Jet Impingement with Spent Flow Management
468
Thermal performance of linear Fresnel reflecting solar concentrator with trapezoidal cavity absorbers
469
Thermal performance of locally made flat plate solar collectors used as part of a domestic hot water system
470
Thermal performance of mechanical seals with textured side-wall
471
Thermal performance of micro-combustors with baffles for thermophotovoltaic system
472
Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux
473
Thermal performance of mixed electroosmotic-pressure driven flows in microtubes with constant wall temperature
474
Thermal performance of multilayer insulation around a horizontal cylinder Original Research Article
475
Thermal performance of multi-stage flash distillation plants in Saudi Arabia
476
Thermal performance of multi-walled carbon nanotubes (MWCNTs) in aqueous suspensions with surfactants SDBS and SDS
477
Thermal performance of myristic acid as a phase change material for energy storage application
478
Thermal performance of nanofluid flow in microchannels
479
Thermal performance of natural airflow window in subtropical and temperate climate zones – A comparative study
480
Thermal performance of natural circulation loop filled with Al2O3/Water nanofluid
481
Thermal performance of non air-conditioned buildings with vaulted roofs in comparison with flat roofs
482
Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles
483
Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids
484
Thermal Performance of Oscillating Blade with Various Geometries in a Straight Channel
485
Thermal performance of packed bed thermal energy storage units using multiple granular phase change composites
486
Thermal performance of palmitic acid as a phase change energy storage material
487
Thermal performance of parabolic concentrators under Malaysian environment: A case study
488
Thermal performance of PCM thermal storage unit for a roof integrated solar heating system
489
Thermal performance of plate-fin heat sinks under confined impinging jet conditions
490
Thermal performance of plate-fin heat sinks with piezoelectric cooling fan
491
Thermal performance of plate-fin vapor chamber heat sinks
492
Thermal performance of plate-type loop thermosyphon at sub-atmospheric pressures
493
Thermal performance of porous microchannel heat sink: Effects of enlarging channel outlet
494
Thermal performance of pulsating heat pipes with different heating patterns
495
Thermal performance of radiant heating floors in furnished enclosed spaces
496
Thermal performance of rotating two-phase thermosyphon disc
497
Thermal performance of screen mesh wick heat pipes using water-based copper nanofluids
498
Thermal performance of seawater desalination systems Original Research Article
499
Thermal performance of shallow solar pond under open cycle continuous flow heating mode for heat extraction
500
Thermal performance of Si and GaAs based solar cells and modules: a review
501
Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material
502
Thermal Performance of Solar Hot Water Systems Using a Flat Plate Collector of Accelerated Risers
503
Thermal performance of TF coils in HT-7U under plasma disruption Original Research Article
504
Thermal performance of the chilled water spirally coiled finned tube in cross flow for air conditioning applications
505
Thermal performance of the condensing covers in a triangular solar still
506
Thermal performance of the CrIS passive cryocooler Original Research Article
507
Thermal performance of the double-pass solar collector with and without porous media
508
Thermal performance of thermoplastic natural rubber solar collector
509
Thermal performance of traditional and contemporary housing in the cool season of Zambia
510
Thermal performance of traditional housing in the cool season in Zambia
511
Thermal performance of two types of energy foundation pile: Helical pipe and triple U-tube
512
Thermal performance of underground power cables with constant and cyclic currents in presence of moisture migration in the surrounding soil
513
Thermal performance of undulant narrow channel with skewed sinusoidal wall-waves and 45° ribs
514
Thermal performance of vertically-aligned multi-walled carbon nanotube array grown on platinum film
515
Thermal performance of water-based suspensions of phase change nanocapsules in a natural circulation loop with a mini-channel heat sink and heat source
516
Thermal performance of window glass panes in an enclosure fire
517
Thermal performance optimization of a flat plate solar air heater using genetic algorithm
518
Thermal performance optimization of building aspect ratio and south window size in five cities having different climatic characteristics of Turkey
519
Thermal performance optimization of free cooling systems using enhanced latent heat thermal storage unit
520
Thermal performance prediction and sensitivity analysis for future deployment of molten salt cavity receiver solar power plants in Algeria
521
Thermal performance prediction of a solar hybrid gas turbine
522
Thermal performance simulation of a solar cavity receiver under windy conditions
523
Thermal Performance Simulation of Hydroponic Green Wall in a Cold Climate
524
Thermal performance study and evaluation of comfort temperatures in vernacular buildings of North-East India
525
THERMAL PERFORMANCE STUDY OF A RADIAL MICROCHANNEL HEAT SINK USING MULTI-LAYERS DIVERGENT CHANNELS
526
Thermal performance study of box type solar cooker from heating characteristic curves
527
Thermal performance study of integrated cold plate with power module
528
Thermal Performance Study of Plate-finned Vapor Chamber Heat Sink
529
Thermal performance testing of flat-plate collectors
530
Thermal performance, economic and environmental life cycle analysis of thermosiphon solar water heaters
531
Thermal performances and CO emissions of gas-fired cooker-top burners
532
Thermal performances comparisons of the glass evacuated tube solar collectors with shapes of absorber tube
533
Thermal performances investigation of a wet cooling tower
534
Thermal performances of corrugated channel with skewed wall waves at rolling and pitching conditions
535
Thermal performances of different types of underground heat exchangers
536
Thermal performances of enhanced smooth and spiky twisted tapes for laminar and turbulent tubular flows
537
Thermal performances of the active and passive water heating systems based on annual operation
538
Thermal performances of water heaters in series
539
Thermal perturbation correlation of calcium binding Human centrin 3 and its structural changes
540
Thermal perturbation of trailing vortices
541
Thermal phase behavior of 1-butyl-3-methylimidazolium hexafluorophosphate: Simultaneous measurements of the melting of two polymorphic crystals by Raman spectroscopy and calorimetry
542
Thermal phase behavior of triethylamine–water mixtures studied by near-infrared spectroscopy: band shift of the first overtone of the C–H stretching modes and the phase diagram
543
Thermal phase lag in a solid containing periodic planar cracks
544
Thermal phase sequences in gibbsite/kaolinite clay: electron microscopy studies
545
Thermal phase transition for some spin-boson models
546
Thermal phase transition in mixed action SU (3) lattice gauge theory and Wilson fermion thermodynamics Original Research Article
547
Thermal phase transition in the NJL model of QCD Original Research Article
548
Thermal phase transition in weakly interacting, large NC QCD
549
Thermal phase transition of RbMnFe(CN)6 observed by X-ray emission and absorption spectroscopy
550
Thermal phase transitions in antimony (III) oxides
551
Thermal phase transitions of solid chiral N,N′-carbonyl-bis-(l-amino acids) and their methyl and benzyl esters
552
Thermal phenomena associated with water transport across a fuel cell membrane: Soret and Dufour effects
553
Thermal phenomena during operation of the oxygen cycle in VRLAB and processes that cause them
554
Thermal photon production in Au + Au collisions: Viscous corrections in two different hydrodynamic formalisms
555
Thermal photon production in heavy-ion collisions
556
Thermal photons and dileptons Original Research Article
557
Thermal Photons and Lepton Pairs from Quark Gluon Plasma and Hot Hadronic Matter
558
Thermal physics of transition edge sensor arrays
559
Thermal physics of transition edge sensor arrays
560
Thermal placement algorithm based on heat conduction analogy
561
Thermal placement optimization of multichip modules using a sequential metamodeling-based optimization approach
562
Thermal plant bids and market clearing in an electricity pool. Minimization of costs vs. minimization of consumer payments
563
Thermal plasma assisted rapid sintering of MgO-doped Al–Zr oxide composites
564
Thermal plasma chemical vapor deposition of wear-resistant, hard Si–C–N coatings
565
Thermal plasma composition in Saturn’s magnetosphere
566
Thermal plasma CVD and wear resistance of double layered Ti–Si–B–C/Ti–B–C coatings on WC–Co cutting tools with various roughness
567
Thermal plasma CVD of PSZ and double layered TiN/PSZ coatings by injection of alkoxides solutions with H2O
568
Thermal plasma deposition of nanophase hard coatings
569
Thermal plasma measurements onboard the magion-5 satellite: a possible plasmasphere data source Original Research Article
570
Thermal plasma processing — syntheses of diamond and β″-alumina
571
Thermal Plasma Processing of Nanostructured Si-based Ceramic Materials
572
Thermal plasma pyrolysis of used tires for carbon black recovery
573
Thermal plasma spheroidization of aluminum oxide and characterization of the spheroidized alumina powder
574
Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges
575
Thermal plasma synthesis and optical properties of Zn2SnO4 nanopowders
576
Thermal plasma synthesis of SiC nano-powders/nano-fibers
577
Thermal plasma synthesis of zinc ferrite nanopowders
578
Thermal Plasma-processed Natural Hydroxyapatite-MnO2 Nanoparticles as a Reusable and Green Heterogeneous Catalyst for Aerobic Oxidation of Benzylic Alkyl Arenes and Alcohols
579
Thermal Plasmas for Material Processing
580
Thermal plasmas: Fundamentals and applications volume 1 : M. I. Boulos, P. Fauchais and E. Wender, Plenum Press, New York, NY, 1994, 452 pages, $85.00
581
Thermal plasma-sprayed nickel catalysts in the clean-up of biomass gasification gas
582
Thermal plume effects: A multi-disciplinary approach for assessing effects of thermal pollution on estuaries using benthic diatoms and satellite imagery
583
Thermal plume models and melt generation in East Africa: A dynamic modeling approach
584
Thermal plume transport from sand and gravel pits – Potential thermal impacts on cool water streams
585
Thermal plumes of kitchen appliances: Cooking mode
586
Thermal plumes of kitchen appliances: Idle mode
587
Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes
588
Thermal pollution and settlement of new tropical alien species: The case of Grateloupia yinggehaiensis (Rhodophyta) in the Venice Lagoon
589
Thermal pollution causes global warming
590
Thermal polydimethylsiloxane degradation. Part 2. The degradation mechanisms
591
Thermal polymerization of methyl (meth)acrylate via reversible addition-fragmentation chain transfer (RAFT) process
592
Thermal polymerization of uniform macrocyclic ethylene terephthalate dimer
593
Thermal positive ion production from thallium chloride molecules impinging upon a tungsten surface heated in high vacua
594
Thermal post-buckled behaviors of cylindrical composite shells with viscoelastic damping treatments
595
Thermal postbuckled vibrations of symmetrically laminated composite plates with initial geometric imperfections
596
Thermal postbuckling analysis of FGM skew plates
597
Thermal postbuckling analysis of FGM skew plates
598
Thermal post-buckling analysis of imperfect laminated plates using a higher-order shear deformation theory
599
Thermal postbuckling analysis of imperfect stiffened laminated cylindrical shells
600
Thermal postbuckling analysis of laminated composite plates
601
Thermal postbuckling analysis of laminated cross-ply truncated circular conical shells
602
Thermal postbuckling analysis of laminated cylindrical shells with piezoelectric actuators
603
Thermal post-buckling analysis of slender columns using the concept of coupled displacement field
604
Thermal post-buckling analysis of slender columns using the concept of coupled displacement field
605
Thermal post-buckling and flutter characteristics of composite plates embedded with shape memory alloy fibers
606
Thermal post-buckling and limit-cycle oscillation of functionally graded panel with structural damping in supersonic airflow
607
Thermal post-buckling and snap-through instabilities of FGM panels in hypersonic flows
608
Thermal post-buckling and the stability boundaries of structurally damped functionally graded panels in supersonic airflows
609
Thermal postbuckling and vibration analyses of functionally graded plates
610
Thermal postbuckling behavior of 3D braided beams with initial geometric imperfection under different type temperature distributions
611
Thermal postbuckling behavior of imperfect shear deformable laminated plates with temperature-dependent properties Original Research Article
612
Thermal post-buckling behavior of patched laminated panels under uniform and non-uniform temperature distributions
613
Thermal postbuckling behavior of shear deformable FGM plates with temperature-dependent properties
614
Thermal postbuckling behavior of shear deformable FGM plates with temperature-dependent properties
615
Thermal post-buckling behaviour of laminated composite cylindrical/hyperboloid shallow shell panel using nonlinear finite element method
616
Thermal post-buckling behaviour of laminated plates using a shear-flexible element based on coupled-displacement field
617
Thermal postbuckling investigations of functionally graded plates using 3-D finite element method
618
THERMAL POST-BUCKLING OF A HEATED ELASTIC ROD WITH PINNED-FIXED ENDS
619
Thermal postbuckling of FGM cylindrical panels resting on elastic foundations
620
Thermal postbuckling of functionally graded fiber reinforced composite cylindrical shells surrounded by an elastic medium
621
Thermal postbuckling of laminated composite skew plates with temperature-dependent properties
622
Thermal Postbuckling of Preloaded Shear Deformable Laminated Plates
623
Thermal postbuckling of shear-deformable laminated plates with piezoelectric actuators
624
THERMAL POSTBUCKLING OF SLENDER ELASTIC RODS WITH HINGED ENDS CONSTRAINED BY A LINEAR SPRING
625
Thermal Postbuckling of Uniform Columns on Elastic Foundation—Intuitive Solution
626
Thermal power estimation by fouling phenomena compensation using wavelet and principal component analysis
627
Thermal power estimation by fouling phenomena compensation using wavelet and principal component analysis Original Research Article
628
Thermal power generation scheduling by simulated competition
629
Thermal power plant efficiency enhancement with Ocean Thermal Energy Conversion
630
Thermal precipitation or gelling behaviour of dissolved methylcellulose (MC) derivatives—Behaviour in water and influence on the extrusion of ceramic pastes. Part 1: Fundamentals of MC-derivatives
631
Thermal preconditioning study for bolted tension joints in pultruded GRP plate
632
Thermal preference, tolerance, and thermal aerobic scope in clownfish Amphiprion ocellaris (Cuvier, 1830) predict its aquaculture potential across tropical regions
633
Thermal preparation of chitosan–acrylic acid superabsorbent: Optimization, characteristic and water absorbency
634
Thermal preparation of thin platinum coatings and their electrochemical and atomic force microscopic characterization
635
Thermal pretreatment and hydraulic retention time in continuous digesters fed with sewage sludge: Assessment using the ADM1
636
Thermal Pretreatment for Improvement of Biogas Production and Salinity Reduction by Zeolite
637
Thermal pretreatment of algae for anaerobic digestion
638
Thermal pretreatment of low-ranked coal for control of mercury emissions
639
Thermal pre-treatment of refractory limonite ores to enhance the extraction of nickel and cobalt under heap leaching conditions
640
Thermal pre-treatment of solid fraction from mechanically-separated raw and digested slurry to increase methane yield
641
Thermal pre-treatment of wet microalgae harvest for efficient hydrocarbon recovery
642
Thermal pretreatment to improve methane production of Scenedesmus biomass
643
Thermal probes alone or with epinephrine for the endoscopic haemostasis of ulcer haemorrhage
644
Thermal Probing of E. coli RNA Polymerase Off-Pathway Mechanisms
645
Thermal problem solution using a surrogate model clustering technique Original Research Article
646
Thermal Problems Caused by Harmonic Frequency Leakage Fluxes in Three-Phase, Three-Winding Converter Transformers
647
Thermal process and surface damage of GaAs induced by 532 nm continuous laser
648
Thermal process effect of lead–indium alloy on crystal structure and superconductivity
649
Thermal process maps for predicting solidification microstructure in laser fabrication of thin-wall structures
650
Thermal processes of a powder particle in coaxial laser cladding
651
Thermal processes taking place in the bone during CO2 laser irradiation
652
Thermal processing and quality: Principles and overview
653
Thermal processing determination time for fermented and acidified indigenes iranian vegetables
654
Thermal processing induced plastic deformation in GaAs wafers
655
Thermal processing of 5-methyltetrahydrofolic acid in the UHT region in the presence of oxygen
656
Thermal Processing of Pacific Salmon in Steam/Air and Water-Immersion Still Retorts: Influence of Container Type/Shape on Heating Behavior
657
Thermal processing of plastics from waste electrical and electronic equipment for hydrogen production
658
Thermal processing of plastics from waste electrical and electronic equipment for hydrogen production
659
Thermal processing of polycrystalline NiTi shape memory alloys
660
Thermal processing of sewage sludge
661
Thermal processing of sewage sludge – II
662
Thermal processing of strained silicon-on-insulator for atomically precise silicon device fabrication
663
Thermal processing of viscous non-Newtonian fluids in annular ducts: effects of power-law rheology, duct eccentricity, and thermal boundary conditions
664
Thermal processing of waste organic substrates: Developing and applying an integrated framework for feasibility assessment in developing countries
665
Thermal processing of whole soya beans: Studies on the inactivation of antinutritional factors and effects on ileal digestibility in piglets
666
Thermal processing optimization through a modified adaptive random search Original Research Article
667
Thermal production of gravitinos Original Research Article
668
Thermal profiles of domestically baked leg-of-lamb roasts and implications for microbiological safety
669
Thermal profiles of the eclipsed moon Original Research Article
670
Thermal properties and applications of the Arrhenius equation for evaluating viscosity and oxidation rates of unrefined pollock oil Original Research Article
671
Thermal properties and biodegradability of the copolymers of l-lactide, ɛ-caprolactone, and ethylene glycol oligomer with maleate units and their crosslinked products
672
Thermal properties and combustion behaviors of flame retarded epoxy acrylate with a chitosan based flame retardant containing phosphorus and acrylate structure
673
Thermal properties and combustion behaviors of flame retarded epoxy acrylate with a chitosan based flame retardant containing phosphorus and acrylate structure
674
Thermal properties and crosslinking of binary TeO2–Nb2O5 and TeO2–WO3 glasses
675
Thermal properties and crystalline structure of poly(10-undecene-1-ol)
676
Thermal properties and crystallization behavior of dendritic polyetheramides
677
THERMAL PROPERTIES AND CRYSTALLIZATION BEHAVIOR OF HIGHLY DEPROTEINIZED NATURAL RUBBER
678
THERMAL PROPERTIES AND CRYSTALLIZATION BEHAVIOR OF HIGHLY DEPROTEINIZED NATURAL RUBBER
679
Thermal properties and crystallization behavior of some TeO2–K2O glasses
680
Thermal properties and crystallization behavior of thermoplastic starch/poly(ɛ-caprolactone) composites
681
Thermal properties and crystallization behavior of Poly(trimethylene terephthalate) copolymers containing isophthalic units
682
Thermal properties and crystallization behaviors of medium-chain-length poly(3-hydroxyalkanoate)s
683
Thermal properties and crystallization kinetics of a sodium aluminophosphate based glass
684
Thermal properties and crystallization of iron phosphate glasses containing up to 25 wt% additions of Si-, Al-, Na- and U-oxides
685
Thermal properties and crystallization of lithium–mica glass and glass-ceramics
686
Thermal properties and cure kinetics of a liquid crystalline epoxy resin with biphenyl-aromatic ester mesogen
687
Thermal properties and cw-laser operation of the ytterbium doped borate Li6Y(BO3)3
688
Thermal properties and devitrification behavior of (2.5−x)CaO·x/3La2O3·2SiO2
689
Thermal properties and firing characteristics of the Zr/KClO4/Viton A priming compositions
690
Thermal Properties and Flame Retardancy of Epoxy Resins Modified with Polysiloxane Containing Epoxy Groups and Redistributed Poly(2,6-dimethyl-l,4-phenylene) Chains
691
Thermal properties and flammability of ethylene-vinyl acetate rubbers (EVM) and their cross-linked blends with nitrile rubber (NBR)
692
Thermal properties and flammability of nanocomposites based on nitrile rubbers and activated halloysite nanotubes and carbon nanofibers
693
Thermal properties and flammability of polylactide nanocomposites with aluminum trihydrate and organoclay
694
Thermal properties and FTIR spectra of K2O/Na2O iron borophosphate glasses
695
Thermal properties and glass formation in the SiO2–B2O3–Bi2O3–ZnO quaternary system
696
Thermal properties and heat-induced aggregation of natural actomyosin extracted from goatfish (Mulloidichthys martinicus) muscle as influenced by iced storage
697
Thermal properties and hydrogen bonding in polymer blend of polybenzoxazine/poly(N-vinyl-2-pyrrolidone)
698
Thermal properties and interactions in blends of poly(ε-caprolactone) with unsaturated polyester resins
699
Thermal properties and microstructure of Roman flat window glass found in Bulgaria
700
Thermal Properties and Phase Transformation of 2 mol% Y2O3-PSZ Nanopowders Prepared by a Co-precipitation Process
701
Thermal properties and phase transitions in (NH4)3ZrF7
702
Thermal properties and physical ageing behaviour of tyrosine-derived polycarbonates
703
Thermal properties and polarized spectral analysis of Tm3+:SrWO4 crystal
704
Thermal properties and reactions towards nucleophiles of an iron complex displaying an acetyl and a pyruvoyl ligands
705
Thermal properties and shelf life of HMX–HTPB based plastic-bonded explosives
706
Thermal properties and stability of TeO2 containing phosphate glasses
707
Thermal properties and structural characterizations of new types of phase change material: Anhydrous and hydrated palmitic acid/camphene solid dispersions
708
Thermal properties and structures of chlorocadmate, bromocadmate, and bromochlorocadmate glasses
709
Thermal properties and surface energy characteristics of interpenetrating polyacrylate and polybenzoxazine networks
710
Thermal properties and temperature regime of champignon cultivation substrate
711
Thermal properties and TGA–FTIR studies of polyacrylic and polymethacrylic acid doped with metal clusters
712
Thermal properties and thermal reliability of eutectic mixtures of some fatty acids as latent heat storage materials
713
Thermal properties and thermal shock resistance of liquid phase sintered ZrC–Mo cermets
714
Thermal properties and transition studies of multi-wall carbon nanotube/nylon-6 composites Original Research Article
715
Thermal properties characterization of conductive thin films and surfaces by pulsed lasers
716
Thermal properties estimation during thawing via real-time neural network learning Original Research Article
717
Thermal properties in cured natural rubber/styrene butadiene rubber blends
718
Thermal Properties Measurement of Micro-electromechanical System Sensors by Digital Moiré Method
719
Thermal properties measurements in biodiesel oils using photothermal techniques
720
Thermal properties of (NH4)32[Mo138O416H6(H2O)58(CH3COO)6]·approximately 250H2O: on the route to prove the complexity of a nanostructured landscape—especially with different type of H2O ligands—embedded in an ‘ocean’ of water molecules
721
Thermal properties of 1-alkyl-3-methylpyridinium halide-based ionic liquids
722
Thermal properties of 2-(aminomethyl)dicarboxylic acids
723
Thermal properties of a DNA denaturation with solvent interaction
724
Thermal properties of a hot pion gas beyond the quasiparticle approximation
725
Thermal properties of a new class of block copolymers based on segments of poly(d,l-lactic-glycolic acid) and poly(ε-caprolactone)
726
Thermal properties of a novel nanoencapsulated phase change material for thermal energy storage
727
Thermal properties of a reaction hot pressed Mo≤5Si3C≤1 ceramic
728
Thermal properties of a solid through -deformed algebra
729
Thermal properties of a variable cavity wall
730
Thermal properties of agave fructans (Agave tequilana Weber var. Azul)
731
Thermal properties of aligned carbon nanotube/carbon nanocomposites
732
Thermal properties of aligned carbon nanotube/carbon nanocomposites
733
Thermal properties of aligned carbon nanotube/carbon nanocomposites
734
Thermal properties of alkaline sodium borohydride solutions
735
Thermal Properties of Alkali-Treated Sugar Palm Fibre Reinforced High Impact Polystyrene Composites
736
Thermal properties of alkyloctamethylferrocenium salts with TFSA and TCNE (TFSA = bis(trifluoromethylsulfonyl)amide and TCNE = tetracyanoethylene)
737
Thermal properties of alkyl-substituted 3,3′-bis(dipyrrolylmethene) dihydrobromides
738
Thermal properties of amine cured diglycidyl ether of bisphenol A epoxy blended with poly(ether imide)
739
Thermal properties of asymmetrical nuclear matter with the new charge-dependent Reid potential Original Research Article
740
Thermal properties of bacterial spores and biopolymers
741
Thermal properties of ball-milled nanocrystalline Fe, Co and Cr powders
742
Thermal properties of barium titanium borate glasses measured by thermal lens technique
743
Thermal properties of beryllium
744
Thermal properties of BeX (X = S, Se and Te) compounds from ab initio quasi-harmonic method
745
Thermal properties of biodegradable poly(PHB/PCL-PEG-PCL) urethanes nanocomposites using clay/poly(ε-caprolactone) nanohybrid based masterbatch
746
Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content
747
Thermal properties of bodies in fractal and cantorian physics
748
Thermal properties of calorimeters with Ti/Au transition-edge sensors on silicon nitride membranes
749
Thermal properties of calorimeters with Ti/Au transition-edge sensors on silicon nitride membranes
750
Thermal properties of CaMgSi2O6 glass–ceramics with Al2O3
751
Thermal properties of carbon fibers at very high temperature Original Research Article
752
Thermal properties of carbon inverse opal photonic crystals
753
Thermal properties of chalcogenide glasses in the GeSe2–As2Se3–CdSe system
754
Thermal properties of chemically synthesized polyaniline (EB) powder
755
Thermal Properties of Chillies
756
Thermal properties of clustered systems of mixed composition: the temperature response of Si–Al clusters studied quantum mechanically
757
Thermal properties of CNT-Alumina nanocomposites
758
Thermal properties of cometary ices and sublimation residua including organics
759
Thermal properties of complexes of amaranthus starch with selected metal salts
760
Thermal properties of copper-coated carbon foams Original Research Article
761
Thermal properties of cumin seed Original Research Article
762
Thermal properties of Cu–Pd alloy under high pressure
763
Thermal properties of cutting tool coatings at high temperatures
764
Thermal properties of di- and triblock copolymers of poly(l-lactide) with poly(oxyethylene) or poly(ε-caprolactone)
765
Thermal properties of diamond particle-dispersed Cu composites
766
Thermal properties of diamond/SiC/Al composites with high volume fractions
767
Thermal properties of DMNB, a detection agent for explosives
768
Thermal properties of elastic fibers
769
Thermal properties of Er:Li2TiGeO5 ferroelastic ceramics
770
Thermal properties of ethylene octene copolymer (Engage)/ dimethyldioctadecyl quaternary ammonium chloride-modified montmorillonite clay nanocomposites
771
Thermal properties of ethylene/long chain α-olefin copolymers produced by metallocenes
772
Thermal properties of fullerene (C60) containing poly(alkyl methacrylate)s
773
Thermal properties of glass frit and effects on Si solar cells
774
Thermal properties of gluten proteins of two soft wheat varieties
775
Thermal properties of glycine phosphite across ferroelectric phase transition: a photopyroelectric study
776
Thermal properties of graphene and multilayer graphene: Applications in thermal interface materials
777
Thermal properties of graphite intercalation compounds with acids Original Research Article
778
Thermal properties of Hf-based metallic glasses
779
Thermal properties of Hf-based metallic glasses
780
Thermal properties of high refractive index epoxy resin system
781
Thermal properties of high-power diode lasers investigated by means of high resolution thermography
782
Thermal properties of homogenous lanthanum hexaaluminate/alumina composite ceramics
783
Thermal properties of hydrating calcium aluminate cement pastes
784
Thermal properties of hydride fuel 45% U–ZrH1.6
785
Thermal properties of hydrogenated amorphous silicon prepared by high-density plasma chemical vapor deposition Original Research Article
786
Thermal properties of image isotones Original Research Article
787
Thermal properties of imidazolium ionic liquids
788
Thermal properties of Jatropha curcas L. kernels
789
Thermal properties of La2O3-doped ZrB2- and HfB2-based ultra-high temperature ceramics
790
Thermal properties of lauric acid/1-tetradecanol binary system for energy storage
791
Thermal properties of Li conducting superionic matirials
792
Thermal properties of Li4/3Ti5/3O4/LiMn2O4 cell
793
Thermal properties of magnetic flux tubes II. Storage of flux in the solar overshoot region
794
Thermal properties of maize masa and tortillas with different components from maize grains, and additives Original Research Article
795
Thermal Properties of Maleated Polyethylene/Layered Silicate Nanocomposites
796
Thermal properties of medium-sized Ge clusters
797
Thermal properties of metamorphic buffer materials for growth of InP double heterojunction bipolar transistors on GaAs substrates
798
Thermal properties of mine tailings and tire crumbs mixtures
799
Thermal Properties of Minor Millet Grains and Flours
800
Thermal properties of Mo3Te4
801
Thermal properties of MoSi2 with minor aluminum substitutions
802
Thermal properties of multicomponent tellurite glass
803
Thermal properties of multicomponent tellurite glass
804
Thermal properties of N-alkyl-N-methylpyrrolidinium and N-butylpyridinium fluorometallates and physicochemical properties of their melts
805
Thermal properties of nanoporous carbons prepared by a template method using different polymeric and organic precursors
806
Thermal properties of nanoporous carbons prepared by a template method using different polymeric and organic precursors
807
Thermal properties of NbTi superconductor wire and its heat release performance over quench
808
Thermal properties of NbTi superconductor wire and its heat release performance over quench
809
Thermal properties of neutron irradiated Se80Te10In10 glass
810
Thermal properties of neutron irradiated Se80Te10In10 glass
811
Thermal properties of new catalysts based on heteropolyanion-doped polyaniline
812
Thermal properties of non-crystallizable oil-in-water highly concentrated emulsions
813
Thermal properties of novel supramolecular polymer networks based on poly(4-vinylpyridine) and disulfonic acids
814
Thermal Properties of Oil Palm Shell Lightweight Concrete with Different Mix Designs
815
Thermal properties of oxides with magnetoplumbite structure for advanced thermal barrier coatings
816
Thermal properties of paraffin based composites containing multi-walled carbon nanotubes
817
Thermal properties of particulate TIMs in squeeze flow
818
Thermal properties of Pb[(Zn1/3Nb2/3)0.93Ti0.07]O3 single crystals grown by the flux Bridgman method
819
Thermal properties of PETI-5/IM7
820
Thermal properties of phase change material Ge2Sb2Te5 doped with Bi
821
Thermal properties of Phaseolus angularis (red bean) globulin
822
Thermal properties of photonic crystals
823
Thermal properties of phthalic anhydride- and phenolic resin-cured rigid rod epoxy resins
824
Thermal properties of phthalonitrile functional polybenzoxazines
825
Thermal properties of pineapple leaf fiber reinforced composites
826
Thermal properties of pineapple leaf fiber reinforced composites
827
Thermal properties of pineapple leaf fiber reinforced composites
828
Thermal properties of pitch-derived graphite foam
829
Thermal properties of plasma exposed carbon and heat flux calculations on a spatial scale of a few microns
830
Thermal properties of plasma-sprayed thermal barrier coating with bimodal structure
831
Thermal properties of plasma-sprayed tungsten deposits
832
Thermal properties of Pluto’s and Charon’s surfaces from Spitzer observations
833
Thermal properties of poly(butylene oxalate) copolymerized with azelaic acid
834
Thermal properties of poly(ethylene oxide)/lauric acid blends: A SSA–DSC study
835
Thermal properties of poly(ethylene succinate) nanocomposite
836
Thermal properties of poly(lactic acid) fumed silica nanocomposites: Experiments and molecular dynamics simulations
837
Thermal properties of poly(l-lactide)/olive stone flour composites
838
Thermal properties of polycrystalline NdN bulk samples with various porosities
839
Thermal properties of polyethylene/montmorillonite nanocomposites prepared by intercalative polymerization
840
Thermal properties of polypropylene/wax blends
841
Thermal properties of polystyrene/group IIB dithizonate films
842
Thermal properties of porous copolymers of BM-DVB and their carbonization products
843
Thermal properties of porous copolymers of BM–DVB and their carbonization products
844
Thermal properties of raw and processed wheat gluten in relation with protein aggregation
845
Thermal properties of redeposition layers in the JT-60U divertor region
846
Thermal Properties of Restructured Beef Snack Sticks Throughout Smokehouse Processing
847
Thermal properties of rigid rod epoxies cured with diaminodiphenylsulfone and dicyandiamide
848
Thermal properties of Si(Al)/diamond composites prepared by in situ reactive sintering
849
Thermal properties of silicon carbide composites fabricated with chopped Tyranno® SiAlC fibres
850
Thermal properties of silicon powder filled high-density polyethylene composites
851
Thermal properties of single-phase Y2SiO5
852
Thermal properties of slow dynamics
853
Thermal properties of Sm2Zr2O7–NiCr2O4 composites
854
Thermal properties of sodium-exchanged palabora vermiculite
855
Thermal Properties of Soils as affected by Density and Water Content
856
Thermal properties of some biologically active 5-(p-substituted phenylazo)-6-aminouracil complexes
857
Thermal properties of some biologically active 5-(p-substituted phenylazo)-6-aminouracil complexes
858
Thermal properties of some CoII, NiII and CuII complexes of new substituted pyrimidine compounds
859
Thermal properties of some pyrimidine, purine, amino-acid and mixed ligand complexes
860
Thermal properties of Sr3Ga2Ge4O14 single crystals grown by the vertical Bridgman method
861
Thermal properties of starch succinates
862
Thermal properties of straw mushroom Original Research Article
863
Thermal properties of structural materials used in LWR vessels
864
Thermal Properties of Tantalum Between 300 and 2300 K
865
Thermal properties of the composite material clay/granular cork
866
Thermal properties of the Fe3Al-5 at.% Cr intermetallic compound and thermal diffusivtty anomaly in D03 phase
867
Thermal properties of the nitrogen-rich Ca-α-Sialons
868
Thermal properties of the plasma-sprayed MgTiO3–CaTiO3 and CaTiO3
869
Thermal properties of the pyrochlore, Y2Ti2O7
870
Thermal properties of thin and thick Ni3Al cluster assembled layers: an atomic scale simulation study
871
Thermal properties of titanium hydrides
872
Thermal properties of titin from porcine and bovine muscles
873
Thermal properties of VPS-W coatings on CuCrZr alloy with Ti bonding layer
874
Thermal properties of wood-derived copper–silicon carbide composites fabricated via electrodeposition
875
Thermal properties of Y(BH4)3 synthesized via two different methods
876
Thermal properties of yttrium hydride
877
Thermal properties of zeolites: effective thermal conductivity of dehydrated powdered zeolite 4A
878
Thermal properties of zirconia co-doped with trivalent and pentavalent oxides Original Research Article
879
Thermal properties of zirconium hydride
880
Thermal properties predictive model for insulating foams
881
Thermal Properties, Crystallinity, and Oxygen Permeability of Na-montmorillonite Reinforced Plasticized Poly(lactic acid) Film
882
Thermal Properties, Heat Sealability and Seal Attributes of Whey Protein lsolate/ Lipid Emulsion Edible Films
883
Thermal properties, miscibility and specific interactions in comparison of linear and star poly(methyl methacrylate) blend with phenolic
884
Thermal properties, sizes, and size distribution of Jupiter-family cometary nuclei
885
Thermal properties, specific interactions, and surface energies of PMMA terpolymers having high glass transition temperatures and low moisture absorptions
886
Thermal property analysis and applications of GFRP panels to integral abutment bridges
887
Thermal property and latent heat energy storage behavior of sodium acetate trihydrate composites containing expanded graphite and carboxymethyl cellulose for phase change materials
888
Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems
889
Thermal property characterization of a titanium modified austenitic stainless steel (alloy D9)
890
Thermal property characterization of fine fibers by the 3-omega technique
891
Thermal property evolution of metal based thermal barrier coatings with heat treatments
892
Thermal property measurement and heat storage analysis of LiNO3/KCl – expanded graphite composite phase change material
893
Thermal property measurement and heat transfer analysis of acetamide and acetamide/expanded graphite composite phase change material for solar heat storage
894
Thermal property measurement of Mexican geothermal cementing systems using an experimental technique based on the Jaeger method
895
Thermal property measurement of thin aluminum oxide layers for giant magnetoresistive (GMR) head applications
896
Thermal Property Measurements and Enthalpy Calculation of the Lithium Bromide+Lithium Iodide+1,3-Propanediol+Water System
897
Thermal property measurements for ecoroof soils common in the western U.S.
898
Thermal property prediction and measurement of organic phase change materials in the liquid phase near the melting point
899
Thermal protection from a finite period of heat exposure – Heat survival of flight data recorders
900
Thermal protection of H13 steel by growth of (TiAl)N films by PAPVD pulsed arc technique
901
Thermal protection of β-carotene in re-assembled casein micelles during different processing technologies applied in food industry
902
Thermal protection system development, testing, and qualification for atmospheric probes and sample return missions: Examples for Saturn, Titan and Stardust-type sample return Original Research Article
903
Thermal protection with liquid film in turbulent mixed convection channel flows
904
Thermal protein unfolding in photo-activated adenylate cyclase nano-clusters from the amoeboflagellate Naegleria gruberi NEG-M strain
905
Thermal pyrolysis characteristics of polymer flocculated waste activated sludge
906
Thermal pyrolysis of fresh and waste fishing nets
907
THERMAL QUANTITATIVE SENSORY TESTING IN FIBROMYALGIA PATIENTS
908
Thermal quantum discord of one-dimensional in three-qubit spin chain with nearest-neighbor and next-nearest neighbor and Dzyaloshinskii-Morriya interaction
909
Thermal quantum fields with spatially cutoff interactions in 1+1 space–time dimensions
910
Thermal quantum Fisher information in quantum dot system
911
Thermal quasiparticle correlations and continuum coupling in nuclei far from stability Original Research Article
912
Thermal quench study in HTSC pancake coil Original Research Article
913
Thermal quenching and electron traps in LSO
914
Thermal quenching behavior of emission bands in Eu-doped ZnS nanowires
915
Thermal quenching characteristics in LaPO4:Eu nanoparticles and nanowires
916
Thermal quenching mechanisms of the Eu3+ luminescence in Ca9Al(PO4)7 obtained by citric route
917
Thermal quenching of defect photoluminescence and recombination rates of electron–hole pairs in a-Si:H
918
Thermal quenching of electroluminescence assisted by an electric field in thin films of tris-(8-hydroxyquinolinato) aluminum (III)
919
Thermal quenching of fluorescence of freshwater, planktonic bacteria Original Research Article
920
Thermal quenching of photoluminescence in ZnO/ZnMgO multiple quantum wells following oxygen implantation and rapid thermal annealing
921
Thermal radiation and buoyancy effects on MHD free convective heat generating flow over an accelerating permeable surface with temperature-dependent viscosity
922
Thermal radiation and chemical reaction effects on magnetohydrodynamic freeconvection heat and mass transfer in a micropolar fluid
923
Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet
924
Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder
925
Thermal radiation as a learned orientation cue in leaf-cutting ants (Atta vollenweideri)
926
Thermal Radiation Calorimeter for Measuring the Specific Heat Capacity of Liquid Samples
927
Thermal Radiation Effect on Hydromagnetic Flow of Dusty Fluid over a Stretching Vertical Surface
928
Thermal radiation effect on mixed convection from vertical surfaces in saturated porous media
929
Thermal radiation effects in phase-change energy-storage systems
930
Thermal radiation effects on magnetohydrodynamic free convection heat and mass transfer from a sphere in a variable porosity regime
931
THERMAL RADIATION EFFECTS ON MHD BOUNDARY LAYER SLIP FLOW PAST A PERMEABLE EXPONENTIAL STRETCHING SHEET IN THE PRESENCE OF JOULE HEATING and VISCOUS DISSIPATION
932
Thermal Radiation Effects on MHD Boundary Layer Slip Flow Past a permeable Exponential Stretching Sheet in the Presence of Joule Heating and Viscous Dissipation
933
Thermal Radiation Effects on MHD Boundary Layer Slip Flow Past a permeable Exponential Stretching Sheet in the Presence of Joule Heating and Viscous Dissipation
934
Thermal radiation effects on MHD flow of a micropolar fluid over a stretching surface with variable thermal conductivity
935
Thermal radiation effects on power-law fluids over a horizontal plate embedded in a porous medium
936
Thermal radiation from nonisothermal spherical particles of a semitransparent material
937
Thermal radiation in ultralight metal foams with open cells
938
Thermal Radiation Mapping the Space–Time Evolution
939
Thermal radiation modelling of DC smelting furnace freeboards
940
Thermal radiation of semitransparent plane-parallel objects
941
Thermal Radiative Properties and Temperature Measurement from Turbine Coatings
942
Thermal radiative properties of a DLC coating
943
Thermal radiative properties of carbon materials under high temperature and vacuum ultra-violet (VUV) radiation for the heat shield of the Solar Probe Plus mission
944
Thermal radiators with embedded pulsating heat pipes: Infra-red thermography and simulations
945
Thermal ratcheting of solder-bonded elastic and elastoplastic layers
946
Thermal rate constants of the pyrolysis of n-Heptane
947
Thermal rate constants over thirty orders of magnitude for the I+H2 reaction
948
Thermal rating assessment of overhead lines by Affine Arithmetic
949
Thermal reaction and desorption behaviors of 2,5-diiodothiophene on clean and passivated Au surfaces
950
Thermal reaction behavior of ZrSiO4 and CaCO3 mixtures for high-temperature refractory applications
951
Thermal reaction behavior of ZrSiO4 and CaCO3 mixtures for high-temperature refractory applications
952
Thermal reaction of cyclic alkadiene with trichlorosilane. Preparative and mechanistic aspects
953
Thermal reaction of SiC films with tungsten and tungsten–rhenium alloys
954
Thermal reaction processes of ternary metal (Au, Ag, Cu) adsorbates on the Si(111) surface
955
Thermal reactions and micro-structure of TiN–AlN layered nano-composites
956
Thermal reactions and micro-structure of TiN–AlN layered nano-composites
957
Thermal reactions at the interface between Si and C nanoparticles: nanotube self-assembling and transformation into SiC
958
Thermal reactions between alkanes and H2S or thiols at high pressure
959
Thermal reactions between alkanes and H2S or thiols at high pressure
960
Thermal reactions in interstellar ice: A step towards molecular complexity in the interstellar medium Original Research Article
961
Thermal reactions of 2-iodoethanol on Cu(1 0 0)
962
Thermal reactions of acetic acid: 13C/12C partitioning between CO2 and CH4
963
Thermal reactions of endo- and exo-6-methylbicyclo[3.2.0]hept-2-enes: an experimental test for a potential ring inversion
964
Thermal reactions of guaiacol and syringol as lignin model aromatic nuclei
965
Thermal reactions of guaiacol and syringol as lignin model aromatic nuclei
966
Thermal reactions of lithiated graphite anode in LiPF6-based electrolyte
967
Thermal reactions of mercaptoethanol on Cu(1 0 0)
968
Thermal reactions of mesocarbon microbead (MCMB) particles in LiPF6-based electrolyte
969
Thermal reactions of pivaloyl- and adamantoyl(tert-butylethynyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene and diphenylacetylene
970
Thermal reactions of pivaloyl- and adamantoyl(tert-butylethynyl)bis(trimethylsilyl)silane with 2,3-dimethylbutadiene and diphenylacetylene
971
Thermal reactions of smectites—Relation of dehydroxylation temperature to octahedral structure
972
Thermal reactions of starch with long-chain unsaturated fatty acids. Part 2. Linoleic acid Original Research Article
973
Thermal reactions of starch with proteogenic amino acids
974
Thermal reactions of uranium metal, UO2, U3O8, UF4, and UO2F2 with NF3 to produce UF6
975
Thermal reactions on the Cl-terminated SiGe(1 0 0) surface
976
Thermal reactivation of ammonia-tailored granular activated carbon exhausted with perchlorate Original Research Article
977
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
978
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
979
Thermal reactivities of non-reducing sugars in polyether—Role of intermolecular hydrogen bonding in pyrolysis
980
Thermal reactivities of non-reducing sugars in polyether—Role of intermolecular hydrogen bonding in pyrolysis
981
Thermal reactivity of cis- and trans-bis(triphenylgermyl)bis(tertiary phosphine)platinum(II)
982
Thermal reactivity of Group 9 transition metal pinacolate complexes: heterocumulene cleavage and CO bond formation
983
Thermal reactivity of rapeseed (Brassica napus L.) under different gas atmospheres
984
Thermal rearranged poly(benzoxazole-co-imide) membranes for CO2 separation
985
Thermal Rearrangement of 2,5-Bis(dicyanomethylene)bicyclo[4.2.0]oct-7-ene and 2,5-Bis(dicyanomethylene)bicyclo[4.2.0] octa-3,7-diene. Unexpected Formation of 2,6-Bis(dicyanomethylene)bicyclo[3.3.0]octa-1(5)-ene and -octa-3,7-diene, New Electron Acceptors
986
Thermal rearrangement of oxygen adsorbed on oxygen-rich Ru(0 0 0 1)
987
Thermal rearrangement of oxygen adsorbed on oxygen-rich Ru(0 0 0 1)
988
Thermal rearrangement of some benzoin arylsulfonylhydrazone derivatives
989
Thermal rearrangement of spiro[naphthalene(naphthopyranofurazan)]oxides to spiro[naphthalene(phenalenofurazan)oxides. A probable furazan oxide triggered tandem isomerisation process
990
Thermal rearrangement of substituted difluoro(methylene)cyclopropane
991
Thermal rearrangements of bis-allenyl thiosulfonates. Synthesis of novel thienothiophene and thieno-oxathiine derivatives
992
Thermal rearrangements of tetrahydroimidazo[1,5-b]isoxazole-2,3-dicarboxylates. Synthesis of 3H-imidazol-1-ium ylides and their silver derivatives
993
Thermal rearrangements of α-(ω-azidoalkyl) enones
994
Thermal reconstruction behavior of the quenched hydroxyapatite powder during reheating in air
995
Thermal recovery and lattice expansion of self-irradiated U0.80Am0.20O2−x, an in situ high temperature x-ray diffraction study
996
Thermal recovery of amorphous zones in 6H-SiC and 3C-SiC induced by low fluence 420 keV Xe irradiation
997
Thermal recovery of antioxidant activity from carnosol quinone, the main antioxidation product of carnosol
998
Thermal recovery strategies for thin heavy oil reservoirs
999
Thermal rectification based on thermochromic materials
1000
Thermal rectification between two thermoelastic solids with a periodic array of rough zones at the interface
