بر اساس عنوان

1
Polymer photovoltaic devices with transparent graphene electrodes produced by spin-casting
2
Polymer Photovoltaics: A Practical Approach, Frederik C. Krebs (Ed.). Society of Photo-Optical Instrumentation Engineers (SPIE) Press, Bellingham, WA, USA (2008), ISBN: 978-0-8194-6781-2
3
Polymer physics of the cytoskeleton
4
Polymer pinning at an interface
5
Polymer plating on AZ31 magnesium alloy surface and film evaluation of corrosion property
6
Polymer pretreatments for enhanced adhesion of metals deposited by the electroless process
7
Polymer product engineering utilising oscillatory baffled reactors
8
Polymer recycling in aqueous two-phase extractions using thermoseparating ethylene oxide–propylene oxide copolymers
9
Polymer reinforced by flax fibres as a viscoelastoplastic material cc
10
Polymer relaxation spectroscopy - dynamic aspects of polymers
11
Polymer replication of 3D microstructures employing a high content fluorine separation layer
12
Polymer resist materials for excimer ablation lithography
13
Polymer science and technology for new generation photonics and biophotonics
14
Polymer science applied to biological problems: Prediction of cytotoxic drug interactions with DNA
15
Polymer selection for passive sampling: A comparison of critical properties Original Research Article
16
Polymer self-assembled nano-structures and surface relief gratings induced with laser at 157 nm
17
Polymer semicrystalline texture made by interplay of crystal growth
18
Polymer separations by liquid interaction chromatography: Principles – prospects – limitations
19
Polymer siRNA conjugates synthesised by controlled radical polymerisation
20
Polymer solar cell based on poly(2,6-bis(3-alkylthiophen-2-yl)dithieno-[3,2-b;2′,3′-d]thiophene)
21
Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
22
Polymer solar cells based on MEH-PPV and PCBM
23
Polymer solar cells based on P3HT:PC71BM doped at different concentrations of isocyanate-treated graphene
24
Polymer solar cells based on P3HT:PC71BM doped at different concentrations of isocyanate-treated graphene
25
Polymer solar cells fabricated with 4,8-bis(2-ethylhexyloxy)benzo[1,2-b:4,5-b′]dithiophene and alkyl-substituted thiophene-3-carboxylate-containing conjugated polymers: Effect of alkyl side-chain in thiophene-3-carboxylate monomer on the device performanc
26
Polymer solar cells using chlorinated indium tin oxide electrodes with high work function as the anode
27
Polymer solar cells with enhanced lifetime by improved electrode stability and sealing
28
Polymer solar cells: Recent development and possible routes for improvement in the performance
29
Polymer solid electrolytes based on viologen-type poly(oxytetramethylene) ionene
30
Polymer solutions in confining geometries
31
Polymer solutions in co-rotating Taylor–Couette flow without vorticity
32
Polymer solutions: A geometric introduction
33
Polymer stabilized silver nanoparticle: An efficient catalyst for proton-coupled electron transfer reaction and the electrochemical recognition of biomolecule
34
Polymer structure and dynamics, and polymer-polymer interactions
35
Polymer support with Schiff base functional group with cobaltous palmitate as oxidation catalyst for cyclohexane Original Research Article
36
Polymer supported bases in solution-phase synthesis. 2. A convenient method for N-alkylation reactions of weakly acidic heterocycles
37
Polymer supported calixarene derivative useful for solid-phase synthesis application
38
Polymer supported carbodiimide strategy for the synthesis of N-acylated derivatives of deoxy- and ribo purinenucleosides using active esters
39
Polymer supported cobalt(II) catalysts for alkene epoxidation Original Research Article
40
Polymer supported oxazolidin-2-ones derived from l-serine—a cautionary tale
41
Polymer supported palladium N-heterocyclic carbene complexes: long lived recyclable catalysts for cross coupling reactions
42
Polymer supported synthesis of aminooxyalkylated oligonucleotides, and some applications in the fabrication of microarrays Original Research Article
43
Polymer supports for low-temperature fuel cell catalysts Review Article
44
Polymer surface chemistry for biologically active materials
45
Polymer surface micropatterning by plasma and VUV-photochemical modification for controlled cell culture
46
Polymer surface modification and characterization of particulate calcium carbonate fillers
47
Polymer surface modification by plasmas and photons
48
Polymer surface modification for the attachment of bioactive compounds
49
Polymer surface morphology control by reactive ion etching for microfluidic devices
50
Polymer surface with graft chains
51
Polymer swelling and impregnation using supercritical CO2: A model-component study towards producing controlled-release drugs
52
Polymer swelling. Part 17: Systematization of steric effects on adsorption parameters as exemplified by swelling of poly(styrene-co-divinylbenzene) to saturation using linear and non-linear acyclic aliphatic ether liquids
53
Polymer swelling. Part 21: Studies that correlate adsorptivity with molecular structure in crosslinked polystyrene systems saturated with sulfur-containing organic liquids
54
Polymer synthesis and characterization in liquid / supercritical carbon dioxide
55
Polymer systems for gene delivery—Past, present, and future
56
Polymer tandem photovoltaic cells with molecularly intimate interfaces achieved by a thin-film transfer technique
57
Polymer temperature sensor for textronic applications
58
Polymer template fabrication of porous hydroxyapatite scaffolds with interconnected spherical pores
59
Polymer theory: path integrals and scaling
60
Polymer theory: path integrals and scaling
61
Polymer therapeutics: Clinical applications and challenges for development
62
Polymer therapeutics-prospects for 21st century: The end of the beginning
63
Polymer thermodynamics of adsorbed protein layers
64
Polymer thermoreversible gels from organogelators enabled by ‘click’ chemistry
65
Polymer thin film photodegradation and photochemical crosslinking: FT-IR imaging, evanescent waveguide spectroscopy, and QCM investigations
66
Polymer tips for application of atomic force microscopy
67
Polymer tips for application of atomic force microscopy
68
Polymer topology and Chern-Simons field theory Original Research Article
69
Polymer toughening using residue of recycled windshields: PVB film as impact modifier
70
Polymer toughness transfer in a transparent interpenetrating glass–polymer composite
71
Polymer tracer detection systems with UV fluorescence spectrometry to improve product recyclability
72
Polymer track membranes for atmospheric pressure field extraction of ions from liquid solutions
73
Polymer transcrystallinity induced by carbon nanotubes
74
Polymer translocation through a nanopore in mesoscopic simulations
75
Polymer tribo-electric charging: dependence on thermodynamic surface properties and relative humidity
76
Polymer versus monomer as displacer in immobilized metal affinity chromatography
77
Polymer vesicles formed by amphiphilic diblock copolymers containing a thermotropic liquid crystalline polymer block
78
Polymer vesicles in various media
79
Polymer waveguide devices with passive pigtailing: an application of LIGA technology
80
Polymer whiskers based on p-mercaptobenzoyl and p-oxybenzoyl blocks
81
Polymer/additive analysis by flash pyrolysis techniques
82
Polymer/bioactive glass nanocomposites for biomedical applications: A review
83
Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials
84
Polymer/carbon nanotube composites for liquid sensing: Model for electrical response characteristics
85
Polymer/carbon nanotube composites for liquid sensing: Selectivity against different solvents
86
Polymer/carrier composites as materials and reactors for organic synthesis
87
Polymer/clay aerogel composites with flame retardant agents: Mechanical, thermal and fire behavior
88
Polymer/clay nanocomposites as VOC barrier materials and coatings
89
Polymer/gold nanoparticles light emitting diodes utilizing high work function metal cathodes
90
Polymer/graphite nanocomposites: Effect of reducing the functional groups of graphite oxide on water barrier properties
91
Polymer/HIO4: An efficient catalyst for solvent-free synthesis of 2-naphthol azo dyes
92
Polymer/layered clay nanocomposites: 2 polyurethane nanocomposites
93
Polymer/layered silicate nanocomposite anticorrosive coatings
94
Polymer/layered silicate nanocomposites as high performance ablative materials
95
Polymer/layered silicate nanocomposites by combined intercalative polymerization and melt intercalation: a masterbatch process
96
Polymer/layered silicate nanocomposites: a review from preparation to processing
97
Polymer/montmorillonite nanocomposites with improved thermal properties: Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement
98
Polymer/montmorillonite nanocomposites with improved thermal properties: Part II. Thermal stability of montmorillonite nanocomposites based on different polymeric matrixes
99
Polymer/nanosilver composite coatings for antibacterial applications
100
Polymer/organosilica nanocomposites based on polyimide with benzimidazole linkages and reactive organoclay containing isoleucine amino acid: Synthesis, characterization and morphology properties
101
Polymer/silicate nanocomposites synthesized with potassium persulfate at room temperature: polymerization mechanism, characterization, and mechanical properties of the nanocomposites
102
Polymer/Single-Walled Carbon Nanotube Films Assembled via Donor-Acceptor Interactions and Their Use as Scaffolds for Silica Deposition
103
Polymer/surfactant assisted self-assembly of nanoparticles into Langmuir–Blodgett films
104
Polymer/surfactant interactions at the air/water interface
105
Polymer/ZnO hybrid materials for near-UV sensors with wavelength selective response
106
Polymer\Ag composite microspheres produced by water-in-oil-in-water emulsion polymerization and their application for a preservative
107
Polymer\Gold Nanoparticle Nanocomposite Light-Emitting Diodes: Enhancement of Electroluminescence Stability and Quantum Efficiency of Blue-Light-Emitting Polymers
108
Polymerae Chain Reaction and Goldmann-Witmer Coefficient Analyi Are Complimentary for the Diagnoi of Infectiou Uveiti
109
Polymerae chain reaction diagnoi in fungal keratiti caued by Alternaria alternata
110
Polymerae Chain Reaction–Baed Rik Aement for Wilm Tumor in poradic Aniridia Original Reearch Article
111
Polymerase Chain Reaction (PCR) Assay for Rapid Diagnosis and Its Role in Prevention of Human Brucellosis in Punjab, India
112
Polymerase chain reaction (PCR) for detection of Brucella melitensis in goat milk
113
Polymerase chain reaction (PCR) is highly sensitive for diagnosis of mucosal leishmaniasis
114
Polymerase Chain Reaction (PCR): An Alternative Rapid Method for Detection of Some Microbial Contamination of Meat Products
115
Polymerase Chain Reaction Amplification as a Diagnostic Tool in Culture-Negative Multiple-Valve Endocarditis
116
Polymerase chain reaction amplification fails to detect aromatase cytochrome P450 transcripts in primary human and rat bone or bone marrow
117
Polymerase chain reaction analysis of oestrogen and androgen receptor expression in human gingival and periodontal tissue
118
Polymerase chain reaction analysis of transgenic plants contaminated by Agrobacterium
119
Polymerase Chain Reaction and Its Application in the Diagnosis of Infectious Keratitis
120
Polymerase chain reaction assay for identification of chicken in meat and meat products
121
Polymerase chain reaction assay targeting cytochrome b gene for the detection of dog meat adulteration in meatball formulation
122
Polymerase chain reaction assay targeting nox gene for rapid identification of Brachyspira canis in dogs
123
Polymerase chain reaction characterization of trypanosomes in Glossina morsitans submorsitans and G. tachinoides collected on the game ranch of Nazinga, Burkina Faso
124
Polymerase chain reaction detection of candidatus liberibacter asiatic associated with citrus huanglonbing
125
Polymerase Chain Reaction Detection of Capnocytophaga canimorsus and Capnocytophaga cynodegmi as the Emerging Zoonosis
126
Polymerase chain reaction detection of Listeria monocytogenes using oligonucleotide primers targeting actA gene
127
Polymerase chain reaction determination of RhC, Rhc, and RhE blood types: An evaluation of accuracy and clinical utility, ,
128
Polymerase chain reaction diagnosis of enterovirus in children with aseptic meningitis
129
Polymerase chain reaction efficiency improved by water soluble β-cyclodextrins capped platinum nanoparticles
130
Polymerase chain reaction fidelity and denaturing high-performance liquid chromatography
131
Polymerase chain reaction for detecting Escherichia coli O157:H7
132
Polymerase chain reaction for detection of Kaposi’s sarcoma virus in breast tumors
133
Polymerase chain reaction for the detection and differentiation of Marek s disease virus strains MDV-l and HVT.
134
Polymerase chain reaction for the detection of flaA-1 genes of oral spirochaetes in human advanced periodontal pockets
135
Polymerase Chain Reaction for the Diagnosis of Tuberculosis
136
Polymerase chain reaction in endomyocardial biopsies for monitoring reactivation of Chagasʹ disease in heart transplantation: A case report and review of the literature
137
Polymerase chain reaction in liposomes Original Research Article
138
Polymerase chain reaction made simple
139
Polymerase chain reaction method for the rapid detection of virulent Shigella spp
140
Polymerase chain reaction of cerebrospinal fluid to diagnose Whippleʹs disease
141
Polymerase Chain Reaction of Mgc2 and 16S rRNA Genes for Detection of Mycoplasma gallisepticum
142
Polymerase Chain Reaction of Mgc2 and 16S rRNA Genes for Detection of Mycoplasma gallisepticum
143
Polymerase chain reaction of nanoparticle-bound primers Original Research Article
144
Polymerase chain reaction primers for the detection of Ceratobasidium bicorne (uninucleate Rhizoctonia
145
Polymerase chain reaction products (PCR) on “DNA barcode zone” resolved by temporal temperature gradient electophoresis: A tool for species identification of mixed meat specimens – A technical note on preliminary results
146
Polymerase chain reaction reveals Trypanosoma cruzi infection suspected by serology in cutaneous and mucocutaneous leishmaniasis patients
147
Polymerase chain reaction search for viral etiology of vulvar vestibulitis syndrome, ,
148
Polymerase Chain Reaction Study of Anogenital Condylomas for High Risk HPV Types
149
Polymerase Chain Reaction Study of Anogenital Condylomas for High Risk HPV Types
150
Polymerase chain reaction typing of Pasteurella multocida capsules isolated in Iran
151
Polymerase chain reaction used for the detection of airborne Mycobacterium tuberculosis in health care settings
152
Polymerase Chain Reaction, Bacteriologic Detection and Antibiogram of Bacteria Isolated from Otitis Media with Effusion in Children, Shiraz, Iran
153
Polymerase Chain Reaction: A Markov Process Approach
154
Polymerase chain reaction-based identification of New World Leishmania species complexes by specific kDNA probes
155
Polymerase chain reaction-based prevalence of hepatitis A, hepatitis E and TT viruses in sewage from an endemic area
156
Polymerase chain reaction-based technique for the selective enrichment and analysis of mosaic arg201 mutations in Gαs from patients with fibrous dysplasia of bone
157
Polymerase chain reaction-based technique for the selective enrichment and analysis of mosaic arg201 mutations in Gαs from patients with fibrous dysplasia of bone
158
Polymerase Chain Reaction-Restriction Fragment Length Polymorphism (PCR-RFLP) Analysis of Three Lipooligosaccharide-Associated Genes of Campylobacter jejuni and Campylobacter coli Isolated From Animal Samples
159
POLYMERASE CHAIN REACTION-SEQUENCE SPECIFIC PRIMER (PCR-SSP) VERSUS SEROLOGY IN TYPING OF HLA-A, -B AND -C IN IRANIAN PATIENTS
160
Polymerase Chaperoning and Multiple ATPase Sites Enable the E. coli DNA Polymerase III Holoenzyme to Rapidly Form Initiation Complexes
161
Polymerase eta Is a Short-lived, Proteasomally Degraded Protein that Is Temporarily Stabilized Following UV Irradiation in Saccharomyces cerevisiae
162
Polymerase β simulations suggest that Arg258 rotation is a slow step rather than large subdomain motions per se
163
Polymerase-Chain-Reaction-Based Detection of Fetal Rhesus D and Y-Chromosome-Specific DNA in the Whole Blood of Pregnant Women during Different Trimesters of Pregnancy
164
Polymerase-Tailored Variations in the Water-Mediated and Substrate-Assisted Mechanism for Nucleotidyl Transfer: Insights from a Study of T7 DNA Polymerase
165
Polymer-assistant hydrothermal synthesis of lead zirconate titanate nanorolls and their strong blue-light emission
166
Polymer-assisted assembly of carbon nanotubes via a template-based method
167
Polymer-assisted complexing controlled orientation growth of ZnO nanorods
168
Polymer-assisted crystallization of low-dimensional lead sulfide particles
169
Polymer-assisted fabrication of nanoparticles and nanocomposites
170
Polymer-Assisted horner–Emmons olefination using PASSflow reactors: pure products without purification
171
Polymer-assisted hydrothermal synthesis of trigonal selenium nanorod bundles
172
Polymer-assisted precipitation of ZnO nanoparticles with narrow particle size distribution
173
Polymer-assisted size control of water-dispersible iron oxide nanoparticles in range between 15 and 100 nm
174
Polymer-Assisted solution-Phase (PASP) parallel synthesis of an α-Ketothiazole library as tissue factor VIIa inhibitors
175
Polymer-assisted solution-phase library synthesis of 4-alkoxy-2-hydroxy-3,5,6-trifluorobenzoic acids
176
Polymer-assisted solution-phase parallel synthesis of dipeptide p-nitroanilides and dipeptide diphenyl phosphonates
177
Polymer-Assisted Synthesis and Characterization of Nickel Aluminate Nanoparticles for Photodegradation of Methylene Blue
178
Polymer-assisted synthesis of aligned amorphous silicon nanowires and their core/shell structures with Au nanoparticles
179
Polymer-assisted synthesis of BaTiO3 nanorods
180
Polymer-assisted synthesis of hydroxyapatite nanoparticle
181
Polymer-assisted synthesis of metallopolymer nanocomposites and their applications in liquefied petroleum gas sensing at room temperature
182
Polymer-based 1 * 6 thermooptic switch incorporating an elliptic TIR waveguide mirror
183
Polymer-based admixtures
184
Polymer-based adsorption medium prepared using a fragment imprinting technique for homologues of chlorinated bisphenol A produced in the environment
185
Polymer-based blue electrophosphorescent light-emitting diodes based on a new iridium(III) diazine complex
186
Polymer-Based Blue Electrophosphorescent Light-Emitting Diodes Using a Bisorthometalated Ir (III) Complex as the Triplet Emitter
187
Polymer-based electrospray device with multiple nozzles to minimize end effect phenomenon
188
Polymer-based flexible microlens arrays with hermaphroditic focusing properties
189
Polymer-based fluorescence sensor incorporating triazole moieties for Hg2+ detection via click reaction
190
Polymer-based fluorescent sensor incorporating 2,2′-bipyridyl and benzo[2,1,3]thiadiazole moieties for Cu2+ detection
191
Polymer-based light-emitting devices: investigations on the role of the indium—tin oxide (ITO) electrode
192
Polymerbased Material for LithiumIon Batteries: Structure, Material Engineering, Device Performance and Challenges (Review)
193
Polymer-based materials for repair and improved durability: Japanese experience
194
Polymer-based membranes applied to gas separation: material and engineering aspects Original Research Article
195
Polymer-based microsensor for soil moisture measurement
196
Polymer-based micro-sensor paired arrays for the determination of primary alcohol vapors
197
Polymer-based micro-sensor paired arrays for the determination of primary alcohol vapors
198
Polymer-based nanoadjuvants for hepatitis C vaccine: The perspectives of immunologists
199
Polymer-based nanocomposites for organic optoelectronic devices. A review
200
Polymer-Based Paclitaxel-Eluting Stents Are Superior to Nonpolymer-Based Paclitaxel-Eluting Stents in the Treatment of De Novo Coronary Lesions
201
Polymer-based paclitaxel-eluting stents reduce in-stent neointimal tissue proliferation: A serial volumetric intravascular ultrasound analysis from the TAXUS-IV trial Original Research Article
202
Polymer-based supercapacitors
203
Polymer-based technology platform for robust electrochemical sensing using gold microelectrodes
204
Polymer-based waveguides with low propagation loss and polarization-dependent loss
205
Polymer-Based, Paclitaxel-Eluting TAXUS Liberté Stent in De Novo Lesions: The Pivotal TAXUS ATLAS Trial Original Research Article
206
Polymer–bioceramic composite coatings on magnesium for biomaterial applications
207
Polymer-bioceramic composites for tissue engineering scaffolds
208
Polymer-Bound 1-Aryl-3-alkyltriazenes as Modular Ligands for Catalysis. Part 1: Synthesis and Metal Coordination
209
Polymer-Bound 1-Aryl-3-alkyltriazenes as Modular Ligands for Catalysis. Part 2: Screening Immobilized Metal Complexes for Catalytic Activity
210
Polymer-bound aluminium salen complex as reusable catalysts for CO2 insertion into epoxides
211
Polymer-bound diazonium salts for the synthesis of diazoacetic esters
212
Polymer-bound metal complexes as catalysts: Synthesis, characterization, reactivity and catalytic activity in E–H bond activation
213
Polymer-bound N-hydroxysuccinimide as a solid-supported additive for DCC-mediated peptide synthesis
214
Polymer-bound N-hydroxysuccinimide esters: A column-free fluorescent-labeling method
215
Polymer-bound reagents for the introduction of spacer-modified biotin labels Original Research Article
216
Polymer-bound self-folding cavitands
217
Polymer-bound TBTU as a new solid-supported reagent for peptide synthesis
218
Polymer-bridging flocculation performance using turbulent pipe flow
219
Polymer-brush stationary phases for open-tubular capillary electrochromatography
220
Polymer-cement mortars for repairing ancient masonries mechanical properties
221
Polymer–ceramic composite protonic conductors
222
Polymer–ceramic conversion of a highly branched liquid polycarbosilane for SiC-based ceramics
223
Polymer-ceramic nanocomposite capacitors for system-on-package (SOP) applications
224
Polymer-ceramic nanocomposites based on new concepts for embedded capacitor
225
Polymer–clay nanocomposites for the removal of trichlorophenol and trinitrophenol from water
226
Polymer–clay nanocomposites: exfoliation of organophilic montmorillonite nanolayers in polystyrene
227
Polymer–clay nanocomposites: Free-radical grafting of polyacrylamide onto organophilic montmorillonite
228
Polymer-coated bismuth film electrodes for the determination of trace metals by sequential-injection analysis/anodic stripping voltammetry Original Research Article
229
Polymer-Coated Fibrous Materials as the Stationary Phase in Packed Capillary Gas Chromatography
230
Polymer-coated hollow fiber microextraction combined with on-column stacking in capillary electrophoresis
231
Polymer-coated hollow-fiber microextraction of estrogens in water samples with analysis by gas chromatography–mass spectrometry
232
Polymer-coated mesoporous silica nanoparticles for the controlled release of macromolecules
233
Polymer-coated optical fibres for application in a direct evanescent wave immunoassay Original Research Article
234
Polymer-coated synthetic fibers designed for miniaturized sample preparation process
235
Polymer-conjugated albumin and fibrinogen composite hydrogels as cell scaffolds designed for affinity-based drug delivery
236
Polymer-derived carbon-supported group VIII metals catalysts for vapor phase carbonylation of methanol Original Research Article
237
Polymer-derived microcellular SiOC foams with magnetic functionality
238
Polymer-derived mullite–SiC-based nanocomposites
239
Polymer-derived yttrium silicate coatings on 2D C/SiC composites
240
Polymer-directed large-scale synthesis of single-crystal vanadium oxide nanobelts
241
Polymer-directed synthesis and magnetic property of nanoparticles-assembled BiFeO3 microrods
242
Polymer-dispersed liquid crystal based on E7: Morphology and characterization
243
Polymer-dispersed liquid crystal/layered double hydroxide nanocomposite: A new emerging optical application Original Research Article
244
Polymer-dispersed liquid-crystal voltage sensor
245
Polymer–drug conjugates: Origins, progress to date and future directions
246
Polymer–drug conjugates: Progress in polymeric prodrugs
247
Polymer-drug conjugates: Recent development in clinical oncology
248
Polymer–drug conjugation, recent achievements and general strategies
249
Polymer–dye interactions as a tool for studying phase transitions
250
Polymerdynamics of cellulose and other polysaccharides in solid state-secondary dielectric relaxation processes
251
Polymer-electrolyte water electrolysis
252
Polymer-electrolyte-based photoelectrochemical solar energy conversion with poly(3-methylthiophene) photoactive electrode
253
Polymer-embedded stannic oxide nanoparticles as humidity sensors
254
Polymer-encapsulated hydrophilic carbon black nanoparticles free from aggregation
255
Polymer-encapsulated silver nanoparticle monomer and dimer for surface-enhanced Raman scattering
256
Polymer-enhanced ultrafiltration process for heavy metals removal from industrial wastewater Original Research Article
257
Polymer-filler derived Mo2C ceramics
258
Polymer-filler derived Mo2C ceramics
259
Polymer–filler interaction in nanocomposites: New interface area function to investigate swelling behavior and Youngʹs modulus
260
Polymer–filler interaction of fumed silica filled polydimethylsiloxane investigated by bound rubber
261
Polymer–filler interactions in PET/CaCO3 nanocomposites: Chain ordering at the interface and physical properties
262
Polymer-Free Fluid for Frocturing Applications
263
Polymer-Free Fluid for Frocturing Applications
264
Polymer-grafted Al2O3-nanoparticles for controlled dispersion in poly(ethylene-co-butyl acrylate) nanocomposites
265
Polymer-grafted multi-walled carbon nanotubes through surface-initiated ring-opening polymerization and click reaction
266
Polymer-grafted QCM chemical sensor and application to heavy metal ions real time detection
267
Polymer-hybridized liposomes of poly(amino acid) derivatives as transepidermal carriers
268
Polymeric [(R4N){(Me3Sn)2OH}Ni(CN)4]n: from layers (R=nC4H9) to infinite ribbons (R=nC5H11)
269
Polymeric [Eu(L)3(H2O)] (HL = 1-(pyridin-4-yl)butane-1,3-dione and Dimeric [Eu2(L)6(H2O)2] (HL = 1,3-di(pyridin-3-yl)propane-1,3-dione) as selective and sensitive chemosensors for Hg(II) ion
270
Polymeric 2,3-naphthalocyaninatoiron (II) complexes with bidentate isocyanides as intrinsic semiconductors
271
Polymeric adsorbent for removing toxic proteins from blood of patients with kidney failure
272
Polymeric amine bearing side-chain thioxanthone as a novel photoinitiator for photopolymerization
273
Polymeric amylase nanoparticles as a new semi-synthetic enzyme system for hydrolysis of starch
274
Polymeric and ceramic membranes in three-phase catalytic membrane reactors for the hydrogenation of methylenecyclohexane Original Research Article
275
Polymeric and Composite-based Microneedles in Drug Delivery: Regenerative Medicine, Microbial Infection Therapy, and Cancer Treatment
276
Polymeric and cyclic manganese phosphates and phosphinates: Synthesis, spectral characterization and solid-state structures
277
Polymeric and dendrimeric pyridoxal enzyme mimics Original Research Article
278
Polymeric and dimeric structures of lithium(triethylgermyl)(triphenyl)borate: synthesis and characterization
279
Polymeric and macrocyclic gold(I) complexes with bridging dithiolate and diphosphine ligands
280
Polymeric and mixed ligand complex of cobalt(II) and 4-hydroxybenzhydrazide: Crystal structure and vibrational spectroscopy
281
Polymeric and Monomeric Forms of a Schiff Base-Nitridomanganese(V) Complex. Synthesis and Crystal Structure
282
Polymeric and polymer-ligated spirobicyclic zwitterionic Janovsky complexes
283
Polymeric anodes for organic light-emitting diodes
284
Polymeric Approach to Adjuvant System in Antibody Production against Leishmaniasis Based on Hybridoma Technology
285
Polymeric assembling through reciprocal metal-η2-arene π-interactions: Synthesis and X-ray characterization of [HgII(RPhNNNPhR′)2Py]2 (R = NO2, R′ = F), an asymmetric bis diaryl-substituted triazenide–pyridinyl complex of Hg(II)
286
Polymeric asymmetric reducing agents: preparation and reducing performance of chitosan/dihydronicotinamide conjugates having l- and d-phenylalanine spacer arms
287
Polymeric barrier coatings via initiated chemical vapor deposition
288
Polymeric barrier membranes for device packaging, diffusive control and biocompatibility
289
Polymeric beads containing Cyanex 923 for actinide uptake from nitric acid medium: Studies with uranium and plutonium
290
Polymeric bidimensional self-assembling of [HgII(RC6H4NNNC6H4R)2Py] (R = m-acetyl) through metal-η2,η2-arene π-interactions and non classical C–H⋯O bonding: Synthesis and X-ray characterization of a bis diaryl symmetric-substituted triazenide complex of H
291
Polymeric Biomaterials (2nd edition): Severian Dumitriu (Ed.); Marcel Dekker Inc, New York, 2002, xiv+1168 pages, ISBN 0-8247-0569-6, US$ 275
292
Polymeric biomaterials for tissue and organ regeneration
293
Polymeric biomaterials Original Research Article
294
Polymeric biomaterials: Strategies of the past vs. strategies of the future
295
Polymeric black tea polyphenols induce phase II enzymes via Nrf2 in mouse liver and lungs
296
Polymeric blend nanocomposite membranes for ethanol dehydration—effect of morphology and membrane–solvent interactions
297
Polymeric calcium phosphate cements derived from poly(methyl vinyl ether-maleic acid)
298
Polymeric cantilever sensors functionalized with multiamine supramolecular hydrogel
299
Polymeric carriers: Preclinical safety and the regulatory implications for design and development of polymer therapeutics
300
Polymeric cation-exchange monolithic columns containing phosphoric acid functional groups for capillary liquid chromatography of peptides and proteins
301
Polymeric chain dependent anomalous solvatochromism of ionic liquid + poly(ethylene glycol) mixtures
302
Polymeric chains in C60 and Co mixture
303
Polymeric chiral phase-transfer catalysts derived from cinchona alkaloids for enantioselective synthesis of α-amino acids
304
Polymeric citrate precursor route to the synthesis of nano-sized barium lead titanates
305
Polymeric CO2/N2 gas separation membranes for the capture of carbon dioxide from power plant flue gases
306
Polymeric coating of surface modified nitinol stent with POSS-nanocomposite polymer
307
Polymeric coatings for biomedical devices
308
Polymeric coatings for impact and wear resistance
309
Polymeric coatings for impact and wear resistance
310
Polymeric coatings that mimic the endothelium: Combining nitric oxide release with surface-bound active thrombomodulin and heparin
311
Polymeric complexes obtained from the interaction of bovine serum albumin and κ-carrageenan
312
POLYMERIC COMPOSITE BASED ON GLASS POWDER – USAGE POSSIBILITIES IN AGROCOMPLEX
313
Polymeric composite bipolar plates for vehicle applications
314
Polymeric composite membranes based on carbon/PSf
315
Polymeric composite membranes for temperature and pH-responsive delivery of doxorubicin hydrochloride
316
Polymeric composites based on polystyrene and cement dust wastes
317
Polymeric compounds in activated sludge supernatant — Characterisation and retention mechanisms at a full-scale municipal membrane bioreactor
318
Polymeric controlled release inhalable powder produced by vibrational spray-drying: One-step preparation and in vitro lung deposition
319
Polymeric coordination system of [Ag2(NO3)2L]n [L = 1,4-bis((cyclohexylthio)acetyl)piperazine] that exhibits supramolecular isomerism with 2D and 3D frameworks
320
Polymeric cryogels as promising materials of biotechnological interest
321
Polymeric crystallization and condensation of calcium polyphosphate glass
322
Polymeric DABCO–bromine complex: a mild oxidant for the preparation of ketones and aldehydes
323
Polymeric design by macromonomer technique
324
Polymeric devices containing imprinted nanospheres: a novel approach to improve recognition in water for clinical uses Original Research Article
325
Polymeric dirhenium(III) complexes of the type [cis-Re2(O2CCH3)2Cl4(LL)]n involving the symmetrical linker ligands pyrazine, 4,4′-bipyridine, and methylenebis(diphenylphosphine oxide)
326
Polymeric dispersants for coal–water slurries
327
Polymeric dispersions of model azobenzene dyes
328
Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study
329
Polymeric effects on DNA condensation by cationic polymers observed by atomic force microscopy
330
Polymeric electrochromics
331
Polymeric electro-mechanic devices applied to antibiotic-controlled release
332
Polymeric electronic gas sensor for determining alcohol content in automotive fuels
333
Polymeric electro-optic digital optical switches with low switching voltage
334
Polymeric emulsion and crosslink-mediated synthesis of super-stable nanoparticles as sustained-release anti-tuberculosis drug carriers
335
Polymeric endoaortic paving: Mechanical, thermoforming, and degradation properties of polycaprolactone/polyurethane blends for cardiovascular applications
336
Polymeric fiber materials for fine cleaning of gases
337
Polymeric fibers with tunable properties: Lessons from spider silk
338
Polymeric fibre adhesion to the cementitious matrix related to the fibres type, water to cement ratio and curing time
339
Polymeric films based on long-chain acetylenes as sensors for iodine vapour
340
Polymeric films from the alternating chemisorption of poly(vinylbenzylchloride) and a 4′-hydroxystilbazole dye
341
Polymeric fluorine-free electrolyte for application in DMFC
342
Polymeric foam behavior under dynamic compressive loading
343
Polymeric foam deformation under dynamic loading by the use of the microtomographic technique
344
Polymeric foam properties derived from 3D images
345
Polymeric foams and sandwich composites: Material properties, environmental effects, and shear-lag modeling
346
Polymeric foil optical waveguide with inkjet printed gas sensitive film for colorimetric sensing
347
Polymeric fractions containing phenol glucosides in flaxseed
348
Polymeric fullerene chains in RbC60 and KC60
349
Polymeric fullerene oxide (fullerene ozopolymers) produced by prolonged ozonation of C60 and C70 fullerenes Original Research Article
350
Polymeric fullerene oxide films produced by decomposition of hexanitro[60]fullerene Original Research Article
351
Polymeric fullerenes
352
Polymeric gel electrolyte containing alkyl phosphate for lithium-ion batteries
353
Polymeric gel electrolytes reinforced with glass-fibre cloth for lithium secondary batteries
354
Polymeric gel electrolytes using a network matrix with carbonyl groups for rechargeable lithium batteries
355
Polymeric grape-seed procyanidins, but not monomeric catechins and oligomeric procyanidins, impair degranulation and membrane ruffling in RBL-2H3 cells Original Research Article
356
Polymeric heart valves: new materials, emerging hopes
357
Polymeric heat exchangers to increase the COP values of adsorption heat pumps utilizing zeolite coatings
358
Polymeric Hollow Fibers: State of the Art Review of Their Preparation, Characterization and Applications in Different Research Areas
359
Polymeric humidity sensor using phosphonium salt-containing polymers
360
Polymeric Hydrogel Scaffolds: Skin Tissue Engineering and Regeneration
361
Polymeric hydrogels and supercritical fluids: The mechanism of hydrogel foaming
362
Polymeric hydrophobic membranes as a tool to control polymorphism and protein–ligand interactions
363
Polymeric imidazolium ionic liquids as valuable stationary phases in gas chromatography: Chemical synthesis and full characterization Original Research Article
364
Polymeric immunoglobulin receptor expression and local immunoglobulin A production in bovine sublingual, submandibular and parotid salivary glands
365
Polymeric ionic liquid (PIL)-supported recyclable catalysts for biomass conversion into HMF
366
Polymeric ionic liquid as a dynamic coating additive for separation of basic proteins by capillary electrophoresis Original Research Article
367
Polymeric ionic liquid as additive for the high speed and efficient separation of aromatic acids by co-electroosmotic capillary electrophoresis
368
Polymeric ionic liquid bucky gels as sorbent coatings for solid-phase microextraction
369
Polymeric ionic liquid coatings versus commercial solid-phase microextraction coatings for the determination of volatile compounds in cheeses
370
Polymeric ionic liquid modified organic-silica hybrid monolithic column for capillary electrochromatography
371
Polymeric ionic liquids (PILs): Effect of anion variation on their CO2 sorption
372
Polymeric ionic liquids as selective coatings for the extraction of esters using solid-phase microextraction
373
Polymeric ionic liquids based on ether functionalized ammoniums and perfluorinated sulfonimides
374
Polymeric lamellar substrate particles for intranasal vaccination
375
Polymeric lanthanide complexes with extended reach bisamide ligands
376
Polymeric light-emitting diodes of submicron size — structures and developments
377
Polymeric like carbon films prepared from liquid gas and the effect of nitrogen
378
Polymeric long-period waveguide gratings
379
Polymeric luminol on pre-treated screen-printed electrodes for the design of performant reagentless (bio)sensors
380
Polymeric macroinitiators for signal amplification in AGET ATRP-based DNA detection
381
Polymeric macroporous formulations for the control release of mosquitocidal Bacillus sphaericus ISPC-8
382
Polymeric material for anti-biofouling
383
Polymeric materials based on silk proteins
384
Polymeric materials for advanced drug delivery
385
Polymeric Materials in Organic Synthesis and Catalysis: Michael R. Buchmeiser (Ed.); Wiley–VCH, Weinheim, Germany, 2003, xxiii+559 pages, ISBN 3-527-30630-7 (£29.95, €39.90)
386
Polymeric matrices for immobilising zinc tetraphenylporphyrin in absorbance based gas sensors
387
Polymeric membrane and coated graphite samarium(III)-selective electrodes based on isopropyl 2-[(isopropoxycarbothioyl)disulfanyl]ethanethioate Original Research Article
388
Polymeric membrane electrodes for selective determination of the central nervous system acting drugs fluphenazine hydrochloride and nortriptyline hydrochloride Original Research Article
389
Polymeric membrane electrodes with enhanced fluoride selectivity using Zr(IV)-porphyrins functioning as neutral carriers
390
Polymeric membrane electrodes with improved fluoride selectivity and lifetime based on Zr(IV)- and Al(III)-tetraphenylporphyrin derivatives Original Research Article
391
Polymeric membrane fouling in sugarcane juice ultrafiltration: role of juice polysaccharides Original Research Article
392
Polymeric membrane neodymium(III)-selective electrode based on 11,13-diaza-4,7,12-trioxo-2(3),8(9)-dibenzoyl- cyclotetridecane-1,11-diene
393
Polymeric membrane pervaporation
394
Polymeric membrane phosphate sensitive electrode based on binuclear organotin compound
395
Polymeric membrane sensor for potentiometric determination of vanadyl ions Original Research Article
396
Polymeric membrane sensors based on Cd(II) Schiff base complexes for selective iodide determination in environmental and medicinal samples
397
Polymeric membrane sensors with boronic acid functionalized boron dipyrromethene for selective measurement of dopamine
398
Polymeric membrane silver-ion selective electrodes based on bis(dialkyldithiophosphates) Original Research Article
399
Polymeric membrane studied using slow positron beam
400
Polymeric membranes for light olefin/paraffin separation Original Research Article
401
Polymeric membranes for nanofiltration in polar aprotic solvents
402
Polymeric membranes for the hydrogen economy: Contemporary approaches and prospects for the future
403
Polymeric membranes incorporated with metal/metal oxide nanoparticles: A comprehensive review Review Article
404
Polymeric membranes preparation by wet phase separation: mechanisms and elementary processes Original Research Article
405
Polymeric mesh for durable infra-red transparent convection shields: Applications in cool roofs and sky cooling
406
Polymeric micelle as the pseudostationary phase in electrokinetic chromatography
407
Polymeric micelle disruption by cosolvents and anionic surfactants
408
Polymeric micelle systems of hydroxycamptothecin based on amphiphilic N-alkyl-N-trimethyl chitosan derivatives
409
Polymeric micelles
410
Polymeric micelles based on photocleavable linkers tethered with a model drug
411
Polymeric micelles containing reversibly phospholipid-modified anti-survivin siRNA: A promising strategy to overcome drug resistance in cancer
412
Polymeric micelles for acyclovir drug delivery
413
Polymeric micelles for cancer therapy: 3 C’s to enhance efficacy
414
Polymeric micelles for parenteral delivery of curcumin: Preparation, characterization and in vitro evaluation
415
Polymeric micelles for the solubilization and delivery of cyclosporine A: pharmacokinetics and biodistribution
416
Polymeric micelles formed by polypeptide graft copolymer and its mixtures with polypeptide block copolymer
417
Polymeric micelles to deliver photosensitizers for photodynamic therapy
418
Polymeric micelles with small lipophilic moieties for drug delivery
419
Polymeric micelle-templated synthesis of hydroxyapatite hollow nanoparticles for a drug delivery system
420
Polymeric microcapsules with light responsive properties for encapsulation and release
421
Polymeric micro-channel-based functionalisation system for micro-cantilevers
422
Polymeric micro-channel-based functionalisation system for micro-cantilevers
423
Polymeric micro-channel-based functionalisation system for micro-cantilevers
424
Polymeric microdevices for transdermal and subcutaneous drug delivery
425
Polymeric microfabricated electrochemical nanoprobe with addressable electrodes
426
Polymeric microfluidic system for DNA analysis Review Article
427
Polymeric microparticles prepared by supercritical antisolvent precipitation
428
Polymeric microsieves produced by phase separation micromolding
429
Polymeric microsieves via phase separation microfabrication: Process and design optimization
430
Polymeric microspheres as stabilizing anchors for oligonucleotide delivery to dendritic cells
431
Polymeric microspheres composed of pH/temperature-sensitive polymer complex
432
Polymeric microspheres preparation by membrane emulsification-phase separation induced process
433
Polymeric microstructures induced by freeze-drying process: Comparative study of PS41–PAA271 morphologies after impregnations in water and in an alkaline solution
434
Polymeric mixed ionic electronic conductors
435
Polymeric mixed matrix membranes containing zeolites as a filler for gas separation applications: A review
436
Polymeric molecular shuttles: Polypseudorotaxanes & polyrotaxanes based on viologen (paraquat) urethane backbones & bis(p-phenylene)-34-crown-10
437
Polymeric molluscicides containing niclosamide moieties
438
Polymeric monolithic materials: Syntheses, properties, functionalization and applications
439
Polymeric monovalent and divalent copper sulfates with 4,4′-bipyridine: [Cu2(SO4)(4,4′-bipy)2 · 6H2O]n and [Cu(SO4)(4,4′-bipy)(H2O) · 0.5H2O]n
440
Polymeric multilayer capsules delivering biotherapeutics
441
Polymeric nanoassemblies entrapping curcumin overcome multidrug resistance in ovarian cancer
442
Polymeric nano-biomaterials in regenerative endodontics
443
Polymeric nanocapsules and nanospheres for encapsulation and long sustained release of hydrophobic cyanine-type photosensitizer
444
Polymeric nanocapsules ultra stable in complex biological media
445
Polymeric nanocapsules via miniemulsion polymerization using redox initiation
446
Polymeric nanocomposite films from functionalized vs suspended single-walled carbon nanotubes
447
Polymeric nanocomposite materials: Synthesis and thermal degradation of acrylonitrile–butadiene–styrene/tin sulfide (ABS/SnS)
448
Polymeric nanocomposites with graphene sheets – Materials and device for superior thermal transport properties
449
Polymeric nanofiber composites with aligned ZnO nanorods
450
Polymeric Nanofibers from Rapid Expansion of Supercritical Solution
451
Polymeric nanofiltration membranes for textile dye wastewater treatment: Preparation, performance evaluation, transport modelling, and fouling control — a review Original Research Article
452
Polymeric nanofiltration of binary water–alcohol mixtures: Influence of feed composition and membrane properties on permeability and rejection
453
Polymeric nanohybrids and functionalized carbon nanotubes as drug delivery carriers for cancer therapy
454
Polymeric nanomedicine for cancer therapy
455
Polymeric nanomedicines based on poly(lactide) and poly(lactide-co-glycolide)
456
Polymeric nano-micelles as drug carrier using polyethylene glycol and polytrimethylene carbonate linear and star-shaped block copolymer
457
Polymeric nano-micelles using poly(ethylene glycol) and poly(trimethylene carbonate) diblock copolymers as a drug carrier
458
Polymeric Nanoparticles and Their Novel Modifications for Targeted Delivery of Bortezomib
459
Polymeric nanoparticles for drug delivery to the central nervous system
460
Polymeric nanoparticles for pulmonary protein and DNA delivery
461
Polymeric nanoparticles from macroscopic crystalline monomers by facile solid-state polymerization in supercritical CO2
462
Polymeric nanoparticles with tunable architecture formed by biocompatible star shaped block copolymer
463
Polymeric nanospheres fabricated with natural emulsifiers for clinical administration of an anticancer drug paclitaxel (Taxol®)
464
Polymeric nanotheranostics for real-time non-invasive optical imaging of breast cancer progression and drug release
465
Polymeric networks of copper(II) ions linked by a bridging polynitrile ligand
466
Polymeric nickel(II) and copper(II) complexes with btc2− ions as bridging ligands (btc2−=1,2,4,5-benzenetetracarboxylic acid dianion)
467
Polymeric octahedral and monomeric tetrahedral Group 12 pseudohalogeno (NCX−: X=O, S, Se) complexes of 4-(N,N-dimethylamino)pyridine
468
Polymeric ocular nanosuspension for controlled release of acyclovir: in vitro release and ocular distribution
469
Polymeric optodes based on upconverting nanorods for fluorescence measurements of Pb2+ in complex samples
470
Polymeric particle dampers under steady-state vertical vibrations
471
Polymeric particles for the controlled release of human amylin
472
Polymeric particles prepared with fluorinated surfmer
473
Polymeric particles with conjugated polymer: Layer on its surface as effective adsorbents of amino acids
474
Polymeric pH indicators immobilized PVA membranes for optical sensors of high basicity based on a kinetic process
475
Polymeric pH indicators immobilized PVA membranes for optical sensors of high basicity based on a kinetic process Original Research Article
476
Polymeric phase of simplicial quantum gravity
477
Polymeric photoinitiators containing in-chain benzophenone and coinitiators amine: Effect of the structure of coinitiator amine on photopolymerization
478
Polymeric photorefractive composite for holographic applications
479
Polymeric photosensitizers. Part 4. Synthesis of poly(sodium styrenesulfonate-block-N-vinylcarbazole) by nitroxide-mediated free radical polymerization
480
Polymeric photovoltaic materials
481
Polymeric plasticizers for gypsum-free cement
482
Polymeric positive-temperature-coefficient materials: dynamic curing effect
483
Polymeric precursor derived nanocrystalline ZnO thin films using EDTA as chelating agent
484
Polymeric precursor pyrolysis for flexural property evaluation of continuous fiber ceramic nanocomposites with nanoparticles
485
Polymeric precursor synthesis of Ba2Ti9O20
486
Polymeric precursor synthesis of Ba6–3xSm8+2xTi18O54 ceramic powder
487
Polymeric protein delivery systems
488
Polymeric protein formation during pasta-making with barley and semolina mixtures, and prediction of its effect on cooking behaviour and acceptability
489
Polymeric proton conducting membranes for medium temperature fuel cells
490
Polymeric pseudo-liquid membrane as a stable liquid membrane—Evidence for carrier-diffusion mechanism
491
Polymeric pseudo-liquid membranes from poly(octadecyl methacrylate)
492
Polymeric rechargeable solid-state proton battery
493
Polymeric Recrystallized Agglomerates of Cefuroxime Axetil Prepared by Emulsion Solvent Diffusion Technique
494
Polymeric salen-Ti(IV) or V(V) complex catalyzed asymmetric synthesis of O-acetylcyanohydrins from KCN, Ac2O and aldehydes
495
Polymeric Scaffolds in Neural Tissue Engineering: A Review
496
Polymeric scaffolds with a double pore structure
497
Polymeric self-assembly changes by surface-modified and in-situ-grown nanoparticles
498
Polymeric sensing films absorbing organic guests into a nanoporous host crystalline phase
499
Polymeric sheets in Mg4C60
500
Polymeric silver(I) and mercury(II) complexes with chiral bis(pyridyl) ligands
501
Polymeric site-specific pharmacotherapy : A.J. Domb John Wiley & Sons Limited, Chichester, UK, 1994, pp. 464
502
Polymeric solar cells based on P3HT:PCBM: Role of the casting solvent
503
Polymeric solid self-nanoemulsifying drug delivery system of glibenclamide using coffee husk as a low cost biosorbent
504
Polymeric spin-valves at room temperature
505
Polymeric sponges coated with hydroxyapatite for metal immobilization
506
Polymeric stabilisation of aqueous suspensions of barium titanate. Part I: Effect of pH
507
Polymeric stabilisation of aqueous suspensions of barium titanate. Part II: Effect of polyelectrolyte concentration
508
Polymeric stabilization of fused corundum during nanogrinding in stirred media mills
509
Polymeric Structures and Dynamic Properties of the Bacterial Actin AlfA
510
Polymeric structures containing self-assembled Lidioxane networks; syntheses and crystal structures of [{Li(dioxane)2.5TaCl4S}n]·n/2 dioxane and [{Li2(dioxane)3Cl}n][TaCl6]n
511
Polymeric structures of a pair of linear, dicarboxylate (tpy)2Ru2+ analogues
512
Polymeric supramolecular assemblies based on multivalent ionic interactions for biomedical applications
513
Polymeric Surfactant Flooding for Improved Oil Recovery: Optimized Wettability and Fluid Mobility
514
POLYMERIC SURFACTANTS BASED ON OLEIC ACID IV. Lamellar Liquid Crystal Polymerization of Sodium Oleate/Oleic Acid/Aliphatic Diene/Water System
515
Polymeric surfactants in disperse systems
516
Polymeric tertiaryphosphine as a green and recyclable organocatalyst for stereoselective isomerization reaction
517
Polymeric thin shells: Measurement of elastic properties at the nanometer scale using atomic force microscopy
518
Polymeric topology and composition constrained polyether–polyester micelles for directional antitumor drug delivery
519
Polymeric triglyceride analogs prepared by enzyme-catalyzed condensation polymerization
520
Polymeric varistor based on PANI/ABS composite
521
Polymeric δ-MgCl2 nanoribbons
522
Polymeric-based perivascular delivery of a nitric oxide donor inhibits intimal thickening after balloon denudation arterial injury: role of nuclear factor-kappaB
523
Polymeric-SiO2-PCMs for improving the thermal properties of gypsum applied in energy efficient buildings
524
Polymer-immobilized fluorinase: Recyclable catalyst for fluorination reactions
525
Polymer-Immobilized Gold Catalysts for the Efficient and Clean Syntheses of Carbamates and Symmetric Ureas by Oxidative Carbonylation of Aniline and Its Derivatives
526
Polymer-immobilized nanoparticles
527
Polymer-immobilized nanoscale and cluster metal particles
528
Polymer-immobilized palladium supported on TiO2 (Pd–PVB–TiO2) as highly active and reusable catalyst for hydrogen generation from the hydrolysis of unstirred ammonia–borane solution
529
Polymer-induced generation and characterization of electrophoretic properties of hollow TiOX nanospheres for electronic paper
530
Polymer-induced vortex modification in decaying two-dimensional turbulence
531
Polymer–ionic liquid composite membranes for propane/propylene separation by facilitated transport
532
Polymer–ionic liquid nano-composites electrolytes: Electrical, thermal and morphological properties
533
Polymerisation and characterisation of conducting polyaniline nanoparticle dispersions
534
Polymerisation and stabilisation of polycaprolactone using a borontrifluoride–glycerol catalyst system
535
Polymerisation and structure–property relationships of Ziegler–Natta catalysed isotactic polypropylenes
536
Polymerisation and surface modification of methacrylate monoliths in polyimide channels and polyimide coated capillaries using 660 nm light emitting diodes
537
Polymerisation characteristics of resin composites polymerised with different curing units
538
Polymerisation kinetics of the Fischer–Tropsch CO hydrogenation using iron and cobalt based catalysts Original Research Article
539
Polymerisation of an industrial resin monitored by infrared fiber evanescent wave spectroscopy
540
Polymerisation of chemically cross-linked actin:thymosin β4 complex to filamentous actin: alteration in helical parameters and visualisation of thymosin β4 binding on F-actin
541
Polymerisation of composite materials in space environment for development of a Moon base Original Research Article
542
Polymerisation of ethylene with t-BuLi modified Cr(II)/SiO2 catalyst Original Research Article
543
Polymerisation of Gliadin Mediated by Mushroom Tyrosinase
544
Polymerisation of Kraft lignin from black liquors by laccase from Myceliophthora thermophila: Effect of operational conditions and black liquor origin
545
Polymerisation of phenylacetylene in water catalysed by Pd(NNO)Cl complexes
546
Polymerisation of polar olefins promoted by organometallic cobalt complexes: free radical or coordinative process?
547
Polymerisation of Protonic Polyaniline/Multi-Walled Carbon Nanotubes-Manganese Dioxide Nanocomposites
548
Polymerisation of siloxane modified divinyl benzene pre-polymers
549
Polymerisation of styrene emulsified by phase inversion in the presence of polyisobutene
550
Polymerisation of vinylidene fluoride in supercritical carbon dioxide: Formation of PVDF macroporous beads
551
Polymerisation of β-alanine through catalytic ester–amide exchange
552
Polymerisation of β-cyclodextrin with succinic anhydride. Synthesis, characterisation, and ion flotation of transition metals
553
Polymerisation resistant synthesis of methacrylamido phenylboronic acids
554
Polymerisation versus degradation of sunflower oil spilled in the marine environments
555
Polymerised bicontinuous microemulsions as stationary phases for capillary electrochromatography: Effect of pore size on chromatographic performance
556
Polymerised high internal phase emulsion cement hybrids: Macroporous polymer scaffolds for setting cements
557
Polymer–ITO nanocomposite template for the optoelectronic application
558
Polymerizable disulfide paclitaxel prodrug for controlled drug delivery
559
Polymerizable group 4 ansa-cyclopentadienyl-amido catalysts for the copolymerization of ethylene with 1-octene
560
Polymerizable inorganic–organic hybrid: Syntheses and structures of mono-lacunary Dawson polyoxometalate-based olefin-containing organosilyl derivatives
561
Polymerizable oil synthesis by hydroxyhalogenation of soybean oil in dense CO2
562
Polymerizable surfactants
563
Polymerization and copolymerization of dimethyl(1-ethoxycarbonyl)vinyl phosphate
564
Polymerization and copolymerization reaction observed in optically levitated aerosol particles
565
Polymerization and depolymerization of fullerenes induced by hole injection from scanning tunneling microscope tips
566
Polymerization and diamond formation from melting methane and their implications in ice layer of giant planets
567
Polymerization and disproportionation of iron and sulfur in silicate melts: insights from an optical basicity-based approach
568
Polymerization and light-induced heat of dental composites cured with LED and halogen technology
569
Polymerization and redox behavior of polypyrrole (PPy) films by in situ EQCM and PT techniques
570
Polymerization- and solvent-induced phase separation in hydrophilic-rich dentin adhesive mimic
571
Polymerization and surface active properties of water-soluble amphiphilic polysiloxane copolymers modified with quaternary ammonium salts and long-carbon chain groups
572
Polymerization behavior and polymer properties of eosin-mediated surface modification reactions
573
Polymerization behavior of propene with [t-BuNSiMe2Flu]TiMe2: effects of solvents and cocatalysts
574
Polymerization characteristics of light- and auto-curing resins for individual splints
575
Polymerization composite shrinkage evaluation with 3D deformation analysis from μCT images
576
Polymerization contraction stress in dentin adhesives bonded to dentin and enamel
577
Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays
578
Polymerization contraction stress in light-cured compomer restorative materials
579
Polymerization contraction stress in light-cured packable composite resins
580
Polymerization contraction stress in resin–tooth bonds under hydrated and dehydrated conditions
581
Polymerization contraction stress in thin resin composite layers as a function of layer thickness
582
Polymerization contraction stress of low-shrinkage composites and its correlation with microleakage in class V restorations
583
Polymerization control and fast characterization of the stereo-defect distribution of heterogeneous Ziegler–Natta isotactic polypropylene
584
Polymerization degree and Raman identification of ancient glasses used for jewelry, ceramic enamels and mosaics
585
Polymerization dependence of the entropy of homo-oligomer peptides
586
Polymerization effects on molecular dynamics of n-ethylene glycol dimethacrylates followed by dielectric relaxation spectroscopy
587
Polymerization efficacy of simplified adhesive systems studied by NMR and MRI techniques
588
Polymerization efficiency and flexural strength of low-stress restorative composites
589
POLYMERIZATION EFFICIENCY OF TWO DUAL-CURE CEMENTS THROUGH DENTAL CERAMICS
590
Polymerization induced phase separation in poly(ether imide)-modified epoxy resin cured with imidazole
591
Polymerization initiation and transient spectrometric studies of water-soluble and -insoluble tert-butyl aroylperbenzoates
592
Polymerization kinetics and modeling of a metallocene cyclic olefin copolymer system
593
Polymerization kinetics and reactivity of alternative initiators systems for use in light-activated dental resins
594
Polymerization kinetics of 10,12-pentacosadiynoic acid monolayer and possible acceleration effect of visible light
595
Polymerization kinetics of boron carbide/epoxy composites
596
Polymerization kinetics of dental adhesives cured with LED: Correlation between extent of conversion and permeability
597
Polymerization kinetics of HEMA/DEGDMA: using changes in initiation and chain transfer rates to explore the effects of chain-length-dependent termination
598
Polymerization mechanism for radiation-induced grafting of styrene into alicyclic polyimide films for preparation of polymer electrolyte membranes
599
Polymerization of 1,2-anhydro-3,4-di-O-benzyl-β-l-rhamnopyranose
600
Polymerization of 1,3-butadiene by bis(salicylaldiminate)cobalt(II) catalysts combined with organoaluminium cocatalysts
601
Polymerization of 1,3-butadiene by cobalt dichloride activated with various methylaluminoxanes Original Research Article
602
Polymerization of 1,3-butadiene catalyzed by cobalt(II) and nickel(II) complexes bearing imino- or amino-pyridyl alcohol ligands in combination with ethylaluminum sesquichloride
603
Polymerization of 1,3-butadiene catalyzed by pincer cobalt(II) complexes derived from 2-(1-arylimino)-6-(pyrazol-1-yl)pyridine ligands Original Research Article
604
Polymerization of 1,3-butadiene with VO(P204)2 and VO(P507)2 activated by alkylaluminum
605
Polymerization of 1-hexene using α-diimine nickel catalysts: Stochastic simulation of branch distribution
606
Polymerization of 2-hydroxyethyl methacrylate initiated by excitation of [Co(NH3)5N3]2+ at 365 and 546 nm
607
Polymerization of 4-methyl-1-pentene catalyzed by α-diimine nickel catalysts: Living/controlled behavior, branch structure, and mechanism
608
Polymerization of 4-methylpentene-1 using homogeneous Ziegler–Natta type catalysts: a kinetic study
609
Polymerization of 5-norbornene-2-methyl acetate catalyzed by air-stable cationic (η3-substituted allyl) palladium complexes of N-heterocyclic carbene
610
Polymerization of a thermoset system into a thermoplastic matrix. Effect of the shear
611
Polymerization of a water soluble glucose vinyl ester monomer with tensoactive properties synthesized by enzymatic catalyst
612
Polymerization of acrylamide initiated by K2S2O8-EDTA-Ag+ redox system
613
Polymerization of acrylate monomers with MAO activated iron(II) and cobalt(II) complexes bearing tri- and tetradentate nitrogen ligands
614
Polymerization of acrylic bone cement using differential scanning calorimetry
615
Polymerization of acrylonitrile in supercritical carbon dioxide
616
Polymerization of acrylonitrile initiated by samarium diiodide in the presence of hexamethylphosphoramide
617
POLYMERIZATION OF ACRYLONITRILE INITIATED BY THE CERIUM (IV)-TARTARIC ACID REDOXSYSTEM: AKINETIC STUDY
618
Polymerization of acrylonitrile initiated by the manganese (III)–glycine redox system: a kinetic study
619
Polymerization of Alkyl Methacrylate Catalyzed by Hydridorhenium Complexes
620
Polymerization of an Escherichia coli Elongation Factor Tu
621
Polymerization of and in mesophases
622
Polymerization of and within self-organized media
623
Polymerization of aniline in an aqueous system containing organic solvents
624
Polymerization of aniline in ice
625
Polymerization of aniline in layered HMMoO6·H2O (M=Nb, Ta)
626
Polymerization of aniline in layered HMMoO6·H2O (M=Nb, Ta)
627
Polymerization of aniline in layered perovskites
628
Polymerization of aniline in layered perovskites
629
Polymerization of aniline in the interlayer space of molybdenum trioxide and its electrochemical properties
630
Polymerization of aniline in the presence of block copolymer micelles
631
Polymerization of aniline in the presence of DBSA in an aqueous dispersion
632
Polymerization of aniline on bacterial cellulose and characterization of bacterial cellulose/polyaniline nanocomposite films
633
Polymerization of aqueous silica in H2O–K2O solutions at 25–200 °C and 1 bar to 20 kbar
634
Polymerization of beta-cyclodextrin with maleic anhydride and structural characterization of the polymers
635
Polymerization of bismaleimide and maleimide monomers catalyzed by nanometer sized Na+/TiO2
636
Polymerization of bisphenol a using Coprinus cinereus peroxidase (CiP) and its application as a photoresist resin
637
Polymerization of butadiene on nanoparticles’ surfaces and formation of metal/polymer nanocomposites
638
Polymerization of Butylmethacrylate in Isopropanol, Photoinduced by Quantum-Sized CdS Particles
639
Polymerization of C60 fullerene thin films by UV pulsed laser irradiation
640
Polymerization of catechin catalyzed by Mn-, Fe- and Al-oxides
641
Polymerization of conducting polymers inside carbon nanotubes
642
Polymerization of cysteine functionalized thiophenes
643
Polymerization of dental composite resins using plasma light
644
Polymerization of dicarbonyl(η5-cyclopentadienyl) (η1-pyrrolyl)iron(II) : A new class of conducting polymers
645
Polymerization of Dimethylaminoethyl Methacrylate Catalyzed by Substituted Indenyl Lanthanide(II) Complexes
646
Polymerization of dissolved humic substances catalyzed by peroxidase. Effects of pH and humic composition
647
Polymerization of ɛ-caprolactone by lanthanide trisborohydrides and crystal structure of [Ce(BH4)2(THF)5][Ce(BH4)4(THF)2]
648
Polymerization of ethene with zirconocene catalysts: an experimental and quantum chemical study of the influence of para-substituent in benzyl in bis{η5-(1-benzyl)indenyl}zirconium dichlorides
649
Polymerization of ethyl methacrylate under the influence of ultrasound assisted a new multi-site phase-transfer catalyst system – A kinetic study
650
Polymerization of ethyl methacrylate under the influence of ultrasound assisted a new multi-site phase-transfer catalyst system – A kinetic study
651
Polymerization of ethylene by the Zieglar–Natta catalyst systems – TiCl4/Al(C2H5)3 supported on carbon blacks
652
Polymerization of ethylene in the presence of 1,3-dimethoxy-p-But-calix[4]arene titanium dichloride. NMR evidence of the cationic titanium compound generated by methylalumoxane
653
Polymerization of ethylene oxide initiated by lithium derivatives via the monomer-activated approach: Application to the direct synthesis of PS-b-PEO and PI-b-PEO diblock copolymers
654
Polymerization of ethylene using zirconocenes supported on swellable cation-exchanged fluorotetrasilicic mica Original Research Article
655
Polymerization of ethylene with (nBuCp)2ZrCl2 supported over mesoporous SBA-15 functionalized with sulfonic acid groups Original Research Article
656
Polymerization of fluorene-based monomers modified with thiavinylidene structure at 9-position and their optical properties
657
Polymerization of Glucans by Enzymatically Active Membranes
658
Polymerization of Glycidyl Phenyl Ether with a Thiophosphonic Acid Ester as a Novel Thermally Latent Initiator
659
Polymerization of Graphite and Carbon Compounds by Aldol Condensation as Anti-Corrosion Coating
660
Polymerization of HEMA photoinitiated by the Safranine/diphenylborinate system
661
Polymerization of hex-1-ene initiated by diimine complexes of nickel and palladium
662
Polymerization of hydroxyacetylenes by ruthenium alkylidene complexes
663
Polymerization of hydroxyl functional polypropylene by metallocene catalysis
664
Polymerization of ionic monomers in polar solvents: kinetics and mechanism of the free radical copolymerization of acrylamide/acrylic acid
665
Polymerization of isobutylene and copolymerization of isobutylene with isoprene promoted by methylalumoxane
666
Polymerization of isomeric N-(4-substituted benzylidene)-4-ethynylanilines and 4-substituted N-(4-ethynylbenzylidene)anilines by transition metal catalysts: preparation and characterization of new substituted polyacetylenes with aromatic Schiff base type
667
Polymerization of isoprene and styrene in the interlayer spacing of graphite
668
Polymerization of Kraft lignin via ultrasonication for high-molecular-weight applications
669
Polymerization of Kraft lignin via ultrasonication for high-molecular-weight applications
670
Polymerization of lactams, 95 Preparation of polyesteramides by the anionic polymerization of ε-caprolactam in the presence of poly(ε-caprolactone)
671
Polymerization of lactams, 96☆ anionic copolymerization of ε-caprolactam with ω-laurolactam
672
Polymerization of lactams. 98: Influence of water on the non-activated polymerization of ε-caprolactam
673
Polymerization of lactams. 99 Preparation of polyesteramides by the anionic copolymerization of ε-caprolactam and ε-caprolactone
674
Polymerization of lactams: 97. Anionic polymerization of ε-caprolactam activated by esters
675
Polymerization of lactides and lactones 11. Ring-opening polymerization of α-acetyl-γ-butyrolactone and copolymerization with β-butyrolactone
676
Polymerization of lactides and lactones: VII. Ring-opening polymerization of lactide by rare earth phenyl compounds
677
Polymerization of Langmuir–Blodgett films of diacetylenes
678
Polymerization of L-Aspartic Acid to Polysuccinimide and Copoly(Succinimide-Aspartate) in Supercritical Carbon Dioxide
679
Polymerization of lignin fragments contained in a model effluent by polyphenoloxidases and horseradish peroxidase/hydrogen peroxide system☆
680
Polymerization of lignosulfonates by the laccase-HBT (1-hydroxybenzotriazole) system improves dispersibility
681
Polymerization of linear aliphatic diamine-based benzoxazine resins under inert and oxidative environments
682
Polymerization of mannosyl tricyclic orthoesters for the synthesis of α(1–6) mannopyranan—the backbone of lipomannan Original Research Article
683
Polymerization of methyl methacrylate and styrene in presence of phthalides
684
Polymerization of methyl methacrylate by iron(II) pyridinebisimine complexes
685
Polymerization of methyl methacrylate by single component catalyst of lanthanocene chloride O(C2H4C5H3CH3)2LnCl (Ln=Y, Nd, Sm)
686
Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization
687
Polymerization of methyl methacrylate initiated by ozonates of tetramethylethene
688
Polymerization of methyl methacrylate using bis(imine)cobalt, a polyolefin catalyst
689
Polymerization of methyl methacrylate with a new rare-earth coordination catalyst
690
Polymerization of methyl methacrylate with ethylene bridged heterodinuclear metallocene of samarium and titanium
691
Polymerization of MMA by oscillating zirconocene catalysts, diastereomeric zirconocene mixtures, and diastereospecific metallocene pairs
692
Polymerization of m-NH2C6H4COO anions in the intercalation compounds of aluminium hydroxide [LiAl2(OH)6][m-NH2C6H4COO]·nH2O
693
Polymerization of multiallyl monomers
694
Polymerization of N,N-dimethylacrylamide in Aerosol OT–water mixtures: from lamellae to segregation
695
Polymerization of norbornene by novel bis(acetylacetonate)palladium/boron trifluoride etherate catalyst system
696
Polymerization of norbornene in the presence of ethene over tetrakis(triphenylphosphine)nickel/boron trifluoride etherate system Original Research Article
697
Polymerization of norbornene using novel palladium carboxylate/boron trifluoride etherate catalyst system
698
Polymerization of o-diethynylbenzene and its derivatives controlled by transition metal catalyst systems
699
Polymerization of olefins with bulky substituents. 1. Homo- and copolymerization of 3-(1-adamantyl)propene
700
Polymerization of olefins with single-site catalyst anchored on amine-functionalized surface of SBA-15
701
Polymerization of organized polymer assemblies
702
Polymerization of oxazolines
703
Polymerization of p-cresol, formaldehyde, and piperazine and structure of monofunctional benzoxazine-derived oligomers
704
Polymerization of p-diethynylbenzene catalyzed by (π-C5H5)(PPh3)Ni(CCC6H4CCH)
705
Polymerization of phenylacetylene by molybdocene dichloride–organoaluminium compound catalyst system
706
Polymerization of phenylacetylene by novel Rh (I)-, Ir (I)- and Ru (IV) 1,3-R2-3,4,5,6-tetrahydropyrimidin-2-ylidenes (R = mesityl, 2-propyl): Influence of structure on activity and polymer structure
707
Polymerization of Polar Vinyl Monomers with Novel Cobalt-based Catalyst
708
Polymerization of propylene in a minireactor: Effect of polymerization conditions on particle morphology
709
Polymerization of propylene oxide by using double metal cyanide catalysts and the application to polyurethane elastomer
710
Polymerization of pyrrole between the layers of α-Tin (IV) Bis(hydrogenphosphate)
711
Polymerization of pyrrole derivatives on polyacrylonitrile matrix, FTIR–ATR and dielectric spectroscopic characterization of composite thin films
712
Polymerization of pyrrole in intracrystalline tunnels of sepiolite
713
Polymerization of pyrrole in microgravity
714
Polymerization of pyrrole on a polyelectrolyte hollow-capsule microreactor
715
Polymerization of resin composite restorative materials: exposure reciprocity
716
Polymerization of short single-walled carbon nanotubes into large strands
717
Polymerization of sodium 4-styrenesulfonate via atom transfer radical polymerization in protic media
718
Polymerization of sodium acrylate in inverse-suspension stabilized by sorbitan fatty esters
719
Polymerization of soybean oil via permanganate oxidation with sub/supercritical CO2
720
Polymerization of sterically hindered a-olefins with singlesite group 4 metal catalyst precursors
721
Polymerization of styrene in solutions with compressed carbon dioxide as antisolvent
722
Polymerization of styrene in γ-cyclodextrin channels: Lightly rotaxanated polystyrenes with altered stereosequences
723
Polymerization of styrene initiated by a novel initiator sodium formaldehyde sulfoxylate and sodium lauryl sulfate
724
Polymerization of styrene with tetradentate chelated α-diimine nickel(II) complexes/MAO catalyst systems: Catalytic behavior and microstructure of polystyrene
725
Polymerization of substituted dithieno[3,4-b:3ʹ,4ʹ-d]thiophenes
726
Polymerization of Sulfopropyl Methacrylate, a Surface Active Monomer, within Layered Double Hydroxide
727
Polymerization of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) around living neural cells
728
Polymerization of thiophene containing cyclobutadiene Co cyclopentadiene complexes
729
Polymerization of Two Unsymmetrical Isomeric Monomers Based on Thieno[3,4-b]thiophene Containing Cyanovinylene Spacers
730
Polymerization of vinyl acetate in microemulsions stabilized with dodecyltrimethylammonium bromide and cetyltrimethylammonium bromide
731
Polymerization of vinyl chloride catalyzed by a titanium complex with an anionic oxygen tripod ligand
732
Polymerization of vinyl ethers using titanium catalysts containing tridentate triamine ligand of the type N[CH2CH(Ph)(Ts)N]22−
733
Polymerization of vinyl monomers via MAO activated iron(II) dichloro complexes bearing bis(imino)pyridine-, quinolinaldimine- and thiophenaldimine-based tridentate nitrogen ligands
734
Polymerization of vinyl sugar ester using ascorbic acid and hydrogen peroxide as a redox reagent
735
Polymerization of vinylene carbonate as well as aminolysis and hydrolysis of poly(vinylene carbonate)
736
Polymerization of α-pinene using Lewis acidic ionic liquid as catalyst for production of terpene resin
737
Polymerization of ε-caprolactone using bulky alkoxo-titanium complexes and structural analysis of [Ti(OBorneoxo)2Cl2(thf)2]
738
Polymerization process of the silane coupling agent 3-aminopropyltriethoxy silane – 1H NMR spectra and kinetics of ethanol release
739
Polymerization profile analysis of resin composite dental restorative materials in real time
740
Polymerization profile analysis of resin composite dental restorative materials in real time
741
Polymerization rate and mechanism of ultrasonically initiated emulsion polymerization of n-butyl acrylate
742
Polymerization rate and mechanism of ultrasonically initiated emulsion polymerization of n-butyl acrylate
743
Polymerization reaction engineering — Metallocene catalysts
744
Polymerization reactivity of sulfomethylated alkali lignin modified with horseradish peroxidase
745
Polymerization shrinkage and contraction stress of dental resin composites
746
Polymerization shrinkage and elasticity of flowable composites and filled adhesives
747
Polymerization shrinkage and hygroscopic expansion of contemporary posterior resin-based filling materials—A comparative study
748
Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives
749
Polymerization shrinkage kinetics of dimethacrylate resin-cements
750
Polymerization shrinkage of experimental short glass fiber-reinforced composite with semi-inter penetrating polymer network matrix
751
Polymerization Shrinkage of Five Bulk-Fill Composite Resins in Comparison with a Conventional Composite Resin
752
Polymerization shrinkage of microfilled composites determined by laser beam scanning
753
Polymerization shrinkage strain of interocclusal recording materials
754
Polymerization shrinkage: effects of boundary conditions and filling technique of resin composite restorations
755
Polymerization shrinkage: effects of constraint and filling technique in composite restorations
756
Polymerization shrinkage-strain and microleakage in dentin-bordered cavities of chemically and light-cured restorative materials
757
Polymerization shrinkage-strain kinetics of temporary crown and bridge materials
758
Polymerization strategies to overcome limiting monomer conversion in silicone-acrylic miniemulsion polymerization
759
Polymerization stress of resin composites as a function of system compliance
760
Polymerization stress related to radiant exposure and its effect on microleakage of composite restorations
761
Polymerization stress, shrinkage and elastic modulus of current low-shrinkage restorative composites
762
Polymerization study of o-Si(OH)4 and complexation with Am(III), Eu(III) and Cm(III)
763
Polymerization study of the aromatic amines generated by the biodegradation of azo dyes using the laccase enzyme
764
Polymerization, grafting and adsorption in the presence of inorganic substrates: Thermal polymerization of styrene with untreated and γ-irradiated silica gel as a case study
765
Polymerization, three-dimensional structure and mechanical properties of Dictyostelium versus rabbit muscle actin filaments
766
Polymerization-induced enhancement of binding and binding-induced polymerization
767
Polymerization-induced phase separation as a one-step strategy to self-assemble alkanethiol-stabilized gold nanoparticles inside polystyrene domains dispersed in an epoxy matrix
768
Polymerization-induced phase separation in the preparation of macroporous TiO2/SiO2 thin films
769
Polymerization-like grafting of thermoplastic polyurethane by microwave plasma treatment
770
Polymerizations and polymers of quinonoid monomers
771
Polymerizations in liquid sulfur dioxide
772
Polymerizations of vinyl-cyclohexane in the presence of C2, C2v, and Cs zirconocene-based catalysts
773
Polymerized bonding agents and the differentiation in vitro of human pulp cells into odontoblast-like cells
774
Polymerized cyclomaltoheptaose (β-cyclodextrin, β-CDn) inclusion complex formation with chlorogenic acid: solvent effects on thermochemistry and enthalpy-entropy compensation
775
Polymerized hemin as an electrocatalytic platform for peroxynitriteʹs oxidation and detection Original Research Article
776
Polymerized hexamethyldisilazane coated on equiatomic TiNi shape memory alloy using DC-pulsed plasma assisted chemical vapor deposition
777
Polymerized ionic liquid diblock copolymers with long alkyl side-chain length
778
Polymerized ionic liquid functionalized multi-walled carbon nanotubes/polyetherimide composites
779
Polymerized ionic liquid-wrapped carbon nanotubes: The promising composites for direct electrochemistry and biosensing of redox protein
780
Polymerized KC60 investigated by scanning tunnelling microscopy (STM)
781
Polymerized linseed oil coated quartz crystal microbalance for the detection of volatile organic vapours
782
Polymerized micelles with compartments
783
Polymerized microemulsions
784
Polymerized nanotube structures – new zeolites?
785
Polymerized Nile Blue derivatives for plasticizer-free fluorescent ion optode microsphere sensors Original Research Article
786
Polymerized organic–inorganic synthesis of nanocrystalline zinc oxide
787
Polymerized organosiloxanes decorated onto carbon nanofibers forming shish-kebab architectures under highly alkaline conditions
788
Polymerized phospholipid bilayers as permanent coatings for small amine separations using mixed aqueous/organic capillary zone electrophoresis
789
Polymerizing mechanism and technical factors optimization of nanometer tetragonal polycrystalline zirconia slurries for the aqueous-gel-tape-casting process
790
Polymerizing mechanism and technical factors optimization of nanometer tetragonal polycrystalline zirconia slurries for the aqueous-gel-tape-casting process
791
Polymerizing mechanism and technical factors optimization of nanometer tetragonal polycrystalline zirconia slurries for the aqueous-gel-tape-casting process
792
Polymer-layered silicate nanocomposites based on poly(ε-caprolactone)
793
Polymer-layered silicate nanocomposites in the design of antimicrobial materials
794
Polymer-layered silicate nanocomposites prepared through in situ reversible addition–fragmentation chain transfer (RAFT) polymerization
795
Polymer-layered silicate nanocomposites. 1. A study of poly(ethylene oxide)/Na+-montmorillonite nanocomposites as polyelectrolytes and polyethylene-block-poly(ethylene glycol) copolymer/Na+-montmorillonite nanocomposites as fillers for reinforcement of po
796
Polymer-layered silicate nanocomposites: an overview
797
Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials
798
Polymer-layered silicate–carbon nanotube nanocomposites: unique nanofiller synergistic effect
799
Polymer-ligands: a novel chemical device for monitoring heavy metals in the aquatic environment?
800
Polymer-like Behavior of Inorganic Nanoparticle Chain Aggregates
801
Polymer-like structure of lecithin reverse micelles in the lecithin+water+cyclohexane system
802
Polymer-matrix composites subjected to low-velocity impact: effect of laminate configuration
803
Polymer-mediated cyclodehydration of alditols and ketohexoses Original Research Article
804
Polymer-Mediated Extraction of Porphirinato Chelates for a Spectrophotometric Approach to Sub-ppt Level Detection of Metal Ions
805
Polymer-mediated extraction of the fluorescent compounds derived by Hantzsch reaction with dimedone for the sensitive determination of aliphatic aldehydes in air
806
Polymer-mediated interactions of fluid membranes in a lyotropic lamellar phase: a small angle X-ray and neutron scattering study
807
Polymer–metal complexes as a catalyst for the growth of carbon nanostructures
808
Polymer-micelle incarcerated ruthenium catalysts for oxidation of alcohols and sulfides
809
Polymer-modified Bitumen from the Wastes of Petrochemical Plants
810
Polymer-modified mortar with a gradient polymer distribution: Preparation, permeability, and mechanical behaviour
811
Polymer-modified Needle Coke Properties Formation During High Temperature Calcination
812
Polymer-modified w/o microemulsions - with tunable droplet-droplet interactions
813
Polymer-mounted N3P(MeNCH2CH2)3N: a green, efficient and recyclable catalyst for room-temperature transesterifications and amidations of unactivated esters
814
Polymer-nanoinclusion interactions in carbon nanotube based polyacrylonitrile extruded and electrospun fibers
815
Polymer–nanotube composites for transparent, conducting thin films
816
Polymer–nanotube interaction in MWCNT/poly(vinyl alcohol) composite mats
817
Polymer-network hydrogel facilitated synthesis of Ca-α-SiAlON balls composed of nanoparticles
818
Polymerothermal Synthesis – A Facile and Versatile Method towards Functional Nanocomposites
819
Polymer-photosynthetic protein multilayer architectures for herbicide optical detection
820
Polymer–polymer adhesion via connector chains: An MD study of the competition between bulk dissipation and connector pull-out
821
Polymer–polymer adhesion with mobile promoters: Connector length dependence
822
Polymer–polymer interactions in dextran systems using thermal analysis
823
Polymer–polymer miscibility and partial solvation parameters
824
Polymer–polymer miscibility: generalized double lattice model
825
Polymer-protected palladium nanoparticles. Morphologies and catalytic selectivities
826
Polymer-protected View the MathML source bimetallic cluster catalysts for visible-light-induced hydrogen generation from water and electron transfer dynamics
827
Polymer-quantum dot-carbon nanotube composites formation under visible light irradiation
828
Polymers
829
Polymers
830
Polymers
831
Polymers
832
Polymers
833
Polymers
834
Polymers
835
Polymers
836
Polymers and carbon nanotubes—dimensionality, interactions and nanotechnology
837
Polymers and manifolds in static random flows: a renormalization group study Original Research Article
838
Polymers and nanomaterials
839
Polymers and nanomaterials
840
Polymers and oligomers derived from pyrrole and N-hydroxymethylpyrrole: A theoretical analysis of the structural and electronic properties
841
Polymers and proteins: interactions at interfaces
842
Polymers and surfactants on the basis of renewable resources
843
Polymers as fuel for laser-based microthrusters: An investigation of thrust, material, plasma and shockwave properties
844
Polymers as novel modifiers for supported metal catalyst in hydrogenation of benzaldehydes
845
Polymers as relative permeability modifiers: adsorption and the dynamic formation of thick polyacrylamide layers
846
Polymers at interfaces and in colloidal dispersions
847
Polymers at interfaces: by G.J. Fleer, M.A. Cohen Stuart, J.M.H.M. Scheutjens, T. Cosgrove and B. Vincent, Chapman and Hall, 1993, ISBN 0412581604
848
Polymers at solid interfaces: A spin labelling approach
849
Polymers at surfaces and interfaces R.A.L. Jones, R.W. Richards; Cambridge University Press, Cambridge, ISBN 0 521 47965 7 Paperback
850
Polymers containing 9-alkylcarbazol-3,6-diyl and different aromatic amino groups in the main chain
851
Polymers containing alternating 1,4-bis(3-octyl-2,5-thienylene)phenylene and 2,5-pyridyl, 4,4’-biphenylene or phenylene repeating units Original Research Article
852
Polymers containing fullerene or carbon nanotube structures
853
Polymers containing quaternary ammonium groups based on poly(N-vinylimidazole)
854
Polymers derived from bicylo[2.2.1]heptene and its derivatives
855
Polymers derived from the amino acid l-tyrosine: polycarbonates, polyarylates and copolymers with poly(ethylene glycol)
856
Polymers designed for laser microstructuring
857
Polymers for bioimaging
858
Polymers for opto-electronic applications: structure and morphology of thin films and their interfaces
859
Polymers for pro- and anti-angiogenic therapy
860
Polymers from non-homopolymerizable monomers by free radical processes
861
Polymers from renewable resources: sorption of Cu+2 ions by cellulose graft copolymers
862
Polymers from renewable resources: synthesis and characterization of poly(2,5-dihydro-2,5-dimethoxy furan)
863
Polymers from triglyceride oils
864
Polymers in cell encapsulation from an enveloped cell perspective
865
Polymers in concrete: a vision for the 21st century
866
Polymers in concrete: a vision for the 21st century ^
867
Polymers in concrete: a vision for the 21st century ^
868
Polymers in conventional and alternative lithography for the fabrication of nanostructures
869
Polymers in drug delivery
870
Polymers in lyotropic liquid crystals
871
Polymers in modern ophthalmic implants—Historical background and recent advances
872
Polymers in nanoconfinement: What can be learned from relaxation and scattering experiments?
873
Polymers in nanotechnology
874
Polymers in our daily life
875
Polymers in sensor applications
876
Polymers in the construction of serviceless sliding bearings
877
Polymers incorporating nitric oxide releasing/generating substances for improved biocompatibility of blood-contacting medical devices
878
Polymers influencing transportability profile of drug
879
Polymers modelling and simulation of solids
880
Polymers of 2-methacryloyloxyethyl phosphorylcholine truly work as cell membrane mimic?
881
Polymers of intrinsic microporosity (PIMs) substituted with methyl tetrazole
882
Polymers of propylene and higher 1-alkenes produced with post-metallocene complexes containing a saligenin-type ligand
883
Polymers Protect Lactate Dehydrogenase during Freeze-Drying by Inhibiting Dissociation in the Frozen State
884
Polymers synthesized from (3-alkylthio)thiophenes by the FeCl3 oxidation method
885
Polymers with aligned carbon nanotubes: Active composite materials
886
Polymers with alkyl main chain pendent biphenyl carbazole or triphenylamine unit as host for polymer light emitting diodes
887
Polymers with covalently attached dyes - materials for OLEDs and Photovoltaics?
888
Polymers with pendent functional groups: IV. The reaction of chloromethylated polystyrene with N-phenacyl-4,4′-bipyridinium bromides
889
Polymers with pendent functional groups: VII. Polysaccharide derivatives containing viologen groups
890
Polymers with randomness: phases and phase transitions
891
Polymers with spatial or topological constraints: Theoretical and computational results
892
Polymers with spatial or topological constraints: Theoretical and computational results
893
Polymers: Editorial overview
894
Polymer–silica nanocomposites prepared by sol–gel technique: Nanoindentation and tapping mode AFM studies
895
Polymer–solvent interaction parameters in polymer solutions at high polymer concentrations
896
Polymer–solvent interaction parameters of SBS rubbers by inverse gas chromatography measurements
897
Polymersomes Based Versatile Nanoplatforms for Controlled Drug Delivery and Imaging
898
Polymer-stabilized graphene dispersions at high concentrations in organic solvents for composite production Original Research Article
899
Polymer-stable magnesium nanocomposites prepared by laser ablation for efficient hydrogen storage
900
Polymer–supercritical fluid interactions
901
Polymer-Supported (beta)-Amino Thioesters as Catalysts for the Enantioselective Addition of Diethylzinc to Aldehydes
902
Polymer-supported 1-butyl-3-methylimidazolium trifluoromethanesulfonate and 1-ethylimidazolium trifluoromethanesulfonate as electrolytes for the high temperature PEM-type fuel cell
903
Polymer-supported and chemoenzymatic synthesis of the Neisseria meningitidis pentasaccharide: a methodological comparison Original Research Article
904
Polymer-supported basic ionic liquid as an efficient heterogeneous catalyst system for straightforward synthesis of flavanones
905
Polymer-supported bis (2-hydroxyanyl) acetylacetonato molybdenyl Schiff base catalyst as effective, selective and highly reusable catalyst in epoxidation of alkenes
906
Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4
907
Polymer-supported catalysis in synthetic organic chemistry
908
Polymer-supported catalysts for efficient on-column preparation of 2-deoxy-2-[18F]fluoro-D-glucose
909
Polymer-Supported catalysts: Enantioselective hydrogenation and hydrogen transfer reduction
910
Polymer-supported chiral catalysts with positive support effects
911
Polymer-supported chiral α-amino amides for the asymmetric addition of diethylzinc to aldehydes: Transforming an inactive homogeneous system into an efficient catalyst Original Research Article
912
Polymer-supported chloroaluminate catalysts for the Diels–Alder reaction of cyclopentadiene with methyl methacrylate Original Research Article
913
Polymer-supported DABCO–palladium complex as a stable and reusable catalyst for room temperature Suzuki–Miyaura cross-couplings of aryl bromides
914
Polymer-supported dichloroiodate as a new polymeric oxidation reagent for novel and selective oxidation of benzylic alcohols under mild aprotic conditions
915
Polymer-supported distannanes: a new and efficient synthesis of highly effective reagents for iodine atom transfer cyclisations
916
Polymer-supported electron-rich diene for hetero Diels–Alder reactions
917
Polymer-supported enzymic synthesis on a preparative scale
918
Polymer-supported ferrocenyl oxazolines for the catalyzed highly enantioselective phenyl transfer to aldehydes
919
Polymer-supported formamides as reusable organocatalysts for allylation of aldehydes with allyltrichlorosilane
920
Polymer-supported gadolinium triflate as a convenient and efficient Lewis acid catalyst for acetylation of alcohols and phenols
921
Polymer-supported IBX amide for mild and efficient oxidation reactions
922
Polymer-Supported IBX-Amide Reagents: Significant Role of Spacer and Additive in Alcohol Oxidation
923
Polymer-supported ionic liquid solid phase extraction for trace inorganic and organic mercury determination in water samples by flow injection-cold vapor atomic absorption spectrometry
924
Polymer-supported ionic liquids: Synthesis, characterization and application in fuel desulfurization
925
Polymer-supported metallocene catalysts for ethylene polymerisation: Characterisation and catalytic studies
926
Polymer-supported metallocene catalysts for gas-phase ethylene/1-hexene polymerization Original Research Article
927
Polymer-supported methylselenite for the oxidative carbonylation of aniline Original Research Article
928
Polymer-supported monodentate phosphite ligands for asymmetric hydrogenation
929
Polymer-supported N-benzyl- and N-benzhydryl-2-nitrobenzenesulfonamides as alternative to aldehyde linkers
930
Polymer-supported N-heterocyclic carbene–rhodium complex catalyst for the addition of arylboronic acids to aldehydes
931
Polymer-supported nitroxyl radical catalyst for selective aerobic oxidation of primary alcohols to aldehydes
932
Polymer-supported nitroxyl radical catalysts for the hypochlorite and aerobic oxidation of alcohols
933
Polymer-supported oligoethylene glycols as heterogeneous multifunctional catalysts for nucleophilic substitution
934
Polymer-supported oligosaccharide synthesis by a loading–release–reloading strategy
935
Polymer-supported oligosaccharide synthesis by a loading–release–reloading strategy
936
Polymer-supported oligosaccharide synthesis by a loading–release–reloading strategy
937
Polymer-supported organotin reagents in the catalytic Stille reaction
938
Polymer-supported palladium catalysed Suzuki–Miyaura reactions in batch and a mini-continuous flow reactor system
939
Polymer-supported palladium perfluorooctanesulfonate [Pd(OPf)2]: A recyclable and ligand-free palladium catalyst for copper-free Sonogashira coupling reaction in water under aerobic conditions
940
Polymer-supported palladium–manganese bimetallic catalyst for the oxidative carbonylation of amines to carbamate esters Original Research Article
941
Polymer-supported palladium–nickel bimetallic hydroxycarbonylation of styrene under aqueous–organic two-phase system Original Research Article
942
Polymer-supported Pd–NHC complexes: Strategies for the development of multifunctional systems
943
Polymer-supported protic functionalized ionic liquids for nucleophilic substitution reactions: superior catalytic activity compared to other ionic resins
944
Polymer-supported reagents and catalysts: increasingly important tools for organic synthesis
945
Polymer-Supported reagents for methylphosphorylation and phosphorylation of carbohydrates
946
Polymer-supported reagents for multi-step organic synthesis: application to the synthesis of sildenafil
947
Polymer-supported selenium-induced electrophilic cyclization: solid-phase synthesis of poly-substituted dihydrofurans and tetrahydrofurans
948
Polymer-supported solution synthesis of blue luminescent BaMgAl10O17:Eu2+ particles
949
Polymer-supported solution synthesis of heparan sulphate-like oligomers
950
Polymer-Supported Sulfinimidoyl Chlorides: A Convenient Reagent for Oxidation of Alcohols
951
Polymer-supported sulfonated magnetic resin: an efficient reagent for esterification of O-alkyl alkylphosphonic-and carboxylic-acids
952
Polymer-supported syntheses of cyclic oligodepsipeptides
953
Polymer-Supported Synthesis of a Branched Trisaccharide of the Type IA Group B Streptococcus Capsular Polysaccharide: 3-Iodo-4-methoxybenzyl as a New O-Protecting Group
954
Polymer-supported synthesis of mono-substituted porphyrins
955
Polymer-supported synthesis of regioregular head-to-tail coupled oligo(3-alkylthiophene)s
956
Polymer-supported tertiary amine in organic synthesis: a useful reagent in the conversion of alkenes to carbonyl compounds via the corresponding ozonides
957
Polymer-supported tertiaryphosphine (JJ–TPP) as a green and recyclable organocatalyst for α-addition of carbon nucleophiles to α,β-unsaturated compounds
958
Polymer-supported thioanisole: a versatile platform for organic synthesis reagents
959
Polymer-supported thiobenzophenone: a self-indicating traceless ‘catch and release’ linker for the synthesis of isothiocyanates
960
Polymer-supported titanium dioxide photocatalysts for environmental remediation: A review Review Article
961
Polymer-supported triacetoxyborohydride: a novel reagent of choice for reductive amination
962
Polymer-supported triphenylphosphine ditriflate: a novel dehydrating reagent
963
Polymer-supported urea: The effect of hydrogen bonding on lanthanide ion affinities
964
Polymer-supported ytterbium perfluorooctanesulfonate [Yb(OPf)3]: A recyclable catalyst for organic reactions
965
Polymer–surfactant complexes as flocculants
966
Polymer–surfactant interaction: differences between alkyl sulfate and alkyl sulfonate
967
Polymer–surfactant interactions: neutron scattering and reflectivity
968
Polymer-surfactant interfacial layer of polystyrene particles modelling by monolayer technique
969
Polymer-templated mesoporous carbons synthesized in the presence of nickel nanoparticles, nickel oxide nanoparticles, and nickel nitrate
970
Polymer-templated mesoporous carbons with nickel nanoparticles
971
Polymer–vesicle association
972
Polymer–water interactions. Origin of perturbed infrared intensities of water in polymeric systems
973
Polymer–water partition coefficients of extended range measured by using organic modifiers in the aqueous phase
974
Polymer-wrapped multiwalled carbon nanotubes synthesized via microwave-assisted in situ emulsion polymerization and their optical limiting properties Original Research Article
975
Polymetacrylate and hybrid interparticle monolithic columns for fast separations of proteins by capillary liquid chromatography
976
Polymetallation of alkenes: Formation of some complexes containing branched chain carbon-rich ligands
977
Polymetallic citric complexes as precursors for spray-pyrolysis deposition of thin ferrite films
978
Polymetallic complexes in microemulsions for the hydrolysis of 4-nitrophenyl phosphate: a bio-mimetic model for decontamination of organophosphates in the environment
979
Polymetallic massive sulfides at the modern seafloor a review
980
Polymetamorphism in the Schirmacher Hills Granulites, East Antarctica: Implications for Tectonothermal Reworking of an Isobarically Cooled Deep Continental Crust
981
Polymethacrylate monolithic and hybrid particle-monolithic columns for reversed-phase and hydrophilic interaction capillary liquid chromatography
982
Polymethacrylate monoliths for preparative and industrial separation of biomolecular assemblies
983
Polymethacrylate polymers with appended aluminum(III)-tetraphenylporphyrins: Synthesis, characterization and evaluation as macromolecular ionophores for electrochemical and optical fluoride sensors Original Research Article
984
Polymethacrylates: Pour point depressants in diesel oil
985
Polymethacrylic acid as a new precursor of CuO nanoparticles
986
Polymethine and squarylium molecules with large excited-state absorption Original Research Article
987
Polymethoxy flavones are responsible for the anti-inflammatory activity of citrus fruit peel
988
Polymethoxyflavonoids from Vitex rotundifolia inhibit proliferation by inducing apoptosis in human myeloid leukemia cells
989
Polymethoxylated flavones in Brazilian orange juice
990
Polymethoxylated, C- and O-glycosyl flavonoids in tangelo (Citrus reticulata × Citrus paradisi) juice and their influence on antioxidant properties
991
Polymethyl methacrylate
992
Polymethyl methacrylate based open-cell porous plastics for high-pressure ceramic casting
993
Polymethyl methacrylate based open-cell porous plastics for high-pressure ceramic casting
994
Polymethyl methacrylate based open-cell porous plastics for high-pressure ceramic casting
995
Polymethyl methacrylate intraocular lens opacification 20 years after cataract surgery: A case report in a tertiary eye hospital in Saudi Arabia
996
Polymethyl methacrylate/montmorillonite nanocomposite beads through a suspension polymerization-derived process
997
Polymethylated [4.1.1] Octanes Leading to Zeolite SSZ-50
998
Polymethylcarborane as a novel bioactive moiety: derivatives with potent retinoid antagonistic activity
999
Polymethylene-block-poly(dimethyl siloxane)-block-polymethylene nanoaggregates in toluene at room temperature
1000
Polymethylhydrosiloxane (PMHS)/trifluoroacetic acid (TFA): a novel system for reductive amination reactions