<< مقالات لاتين فني مهندسي >>
<< بر اساس عنوان >>
1
Erratum: Analysis of singular systems using Taylor series approach
2
Erratum: Analysis of transient data in noise
3
Erratum: Analytic Model for the Surface Potential and Drain Current in Negative Capacitance Field-Effect Transistors
4
Erratum: Analytical i.g.f.e.t. model including drift and diffusion currents
5
Erratum: Anaylsis of the arc formed along the surface of a flat plate immersed in a laminar flow of gas
6
Erratum: Another method for the RC active simulation of doubly-terminated LC ladder filters
7
Erratum: Application of 3-port coaxial junction to r.f.-immittance standardisation and measurements
8
Erratum: Application of a systolic array to adaptive beamforming
9
Erratum: Application of finite-element method to H-plane waveguide discontinuities
10
Erratum: Application of space-time duality to recursive structures
11
Erratum: Applications of time-domain methods to microwave measurements
12
Erratum: Approach to the analysis of nonlinear feedback oscillators under large-signal injection
13
Erratum: Approximations to hybrid mode slot line behaviour
14
Erratum: Around-the-corner radar: detection of a human being in non-line of sight
15
Erratum: Aspects of the development of dielectrics for radio frequency submarine telephone cables
16
Erratum: Asymptotically optimum detection of fluctuating targets in non-Gaussian interference
17
Erratum: Asynchronous starting of synchronous machines with or without rectifiers in the field circuit
18
Erratum: Attenuation due to rainfall on a 24 km microwave link working at 11, 18 and 36 GHz
19
Erratum: Attenuation in an elliptic waveguide
20
Erratum: Attenuation measurements on single pieces of fibre and extrapolation over longer distances
21
Erratum: Auto-resetting interrupter for use with 11 kV triggered spark gaps
22
Erratum: Avalanche GaAlAs/GaAs heterojunction phototransistor with optoelectronic bistability
23
Erratum: Average power-handling capability of microstrip lines
24
Erratum: Band-elimination filter employing surface-acoustic-wave resonators
25
Erratum: Bandstop iris for rectangular waveguide
26
Erratum: Bandwidth and demodulation gain in q.s.s.b. f.m.
27
Erratum: Bandwidth properties of corrugated conical horns
28
Erratum: Base resistance in silicon planar transistors
29
Erratum: Basic T matrix patterns for 2-port linear transformation networks in the real domain
30
Erratum: Bending losses of multimode optical fibres
31
Erratum: Binary sequences with good correlation properties
32
Erratum: Birefringence in graded-index monomode fibres with elliptical cross-section
33
Erratum: Birefringence measurement in twisted single-mode fibres
34
Erratum: Block-diagonal structure of Walsh-Hadamard/discrete cosine transform
35
Erratum: Book review: Digital Logic Design
36
Erratum: Boron redistribution at the oxide--silicon interface during drive-in in oxidising atmospheres
37
Erratum: Broadband bulk-wave cancellation in acoustic-surface-wave devices
38
Erratum: Broadband matching of high-Q resonant loads using coupled lines
39
Erratum: Buffer design in a closed form with hybrid input and random server interruptions
40
Erratum: Buffered stack memory organisation
41
Erratum: Buried-channel c.c.d. models based on a 1-dimensional analysis
42
Erratum: Cable television and the wired city
43
Erratum: Cable-fault location by impulse-current method
44
Erratum: Calculating transfer function and its first- and second-order sensitivities using one network analysis
45
Erratum: Calculation and measurement of the earth impedance of an e.h.v. substation
46
Erratum: Calculation of communication-network response to arbitrary transients
47
Erratum: Calculation of magnetic field and forces in electromagnetic devices for separation of steel sheets
48
Erratum: Calculation of piecewise-constant control strategies for linear systems with retarded control
49
Erratum: Calculation of steady-state response of linear system to periodic sampled signal
50
Erratum: Calculation of the external thermal resistance of buried cables through conformal transformation
51
Erratum: Calculation of the secondary-radiation pattern for a paraboloid reflector with a given illumination function and feed position
52
Erratum: CAMELOT: a computer-aided measure for logic testability
53
Erratum: Can a pulse excitation smaller than kT be detected?
54
Erratum: Carrier profiling of InP
55
Erratum: Cascade synthesis of switched-capacitor networks employing voltage inverter switches
56
Erratum: Catastrophic optical damage in GaAlAs/GaAs laser diodes
57
Erratum: Cellular dynamic memory array with reduced data-access time
58
Erratum: Characteristic admittance of an array of rectangular conductors
59
Erratum: Characteristic function for quasielliptic filters
60
Erratum: Characteristic impedance of coplanar waveguide
61
Erratum: Characteristics of high-contrast bromide-sodalite storage displays with selective erasure
62
Erratum: Chebyshev approximation of arbitrary frequency response for nonrecursive digital filters with linear phase
63
Erratum: Circularly polarised radiation from narrow wall slots in rectangular waveguide
64
Erratum: Class of Hamiltonian-partitionable networks
65
Erratum: CMOS circuits made in thin SIMOX films
66
Erratum: Coaxial 2-port resistor and its application to r.f. measurements and standards
67
Erratum: Coaxial 2-port S-parameter system for transistor characterisation in three configurations from 1ߝ500 MHz
68
Erratum: Coaxial directional couplers with exceptional directivity and v.s.w.r. over wide frequency bands
69
Erratum: Coaxial junction with 3-ports as a variable 2-port S parameter standard at microwave frequencies
70
Erratum: Coherent pulse generation by active modelocking of a GaAlAs laser in a Selfoc lens extended resonator
71
Erratum: Combinatorial problems in multitarget tracking - a comprehensive solution
72
Erratum: Combined enhancement and adaptive transform coding of noisy speech
73
Erratum: Combined switched-capacitor FIR N-path filter using only grounded capacitors
74
Erratum: Combined triple-transit and bulk-wave suppression in s.a.w. delay line
75
Erratum: Comment on efficient method for the calculation of first- and second-order network sensitivities
76
Erratum: Comment on practical technique for the successive-overrelaxation method
77
Erratum: Compact broadband microstrip antenna
78
Erratum: Comparative performance of equal-valued-capacitor active RC structures
79
Erratum: Comparison of alternative skew-effect parameters of cage induction motors
80
Erratum: Comparison of numerical computations of optical-waveguide transmission parameters
81
Erratum: Comparison of quasifeedforward- and feedback-controlled amplifier
82
Erratum: Comparison of the existing tool localisation methods on two-dimensional ultrasound images and their tracking results
83
Erratum: Comparison of three simple field-effect-transistor models
84
Erratum: Comparison of universal logic gates with NAND and NOR gates in the realisation of functions of three variables
85
Erratum: Comparisons of synchronous-machine models in the study of the transient behaviour of electrical power systems
86
Erratum: Compensating fibre splice technique
87
Erratum: Complete photon conversion in backward-travelling-wave parametric amplification and oscillation
88
Erratum: Complex BIFORE transform
89
Erratum: Complex distribution effects of thin component ohmic-contact layers on GaAs
90
Erratum: Complex radar objects and polarisation dependence of received backscattered echoes
91
Erratum: Compound representation of high resolution sea clutter
92
Erratum: Computation of input impedance in microstrip antennas. Graphic representation and numerical integration of oscillating functions
93
Erratum: Computation of mixing coefficients for field-effect transistors with non-square-law transfer characteristics
94
Erratum: Computation of time-domain response of URC networks
95
Erratum: Computer analysis for the various-order sensitivity coefficients in frequency domain
96
Erratum: Computer analysis of the fundamental and higher-order modes in single and coupled microstrip
97
Erratum: Computer simulation of SC circuits using NAP
98
Erratum: Computer studies on the widening of the avalanche zone and the decrease in efficiency of silicon X-band symmetrical double-drift impatt diodes at high current densities
99
Erratum: Computer technique for solving 3-dimensional electron-optics and capacitance problems
100
Erratum: Computing & Control Lecture
101
Erratum: Concerning the electric strength of solid argon
102
Erratum: Condition for ensuring a satisfactory stability range in a p.w.m. system using the method of Murphy and Wu
103
Erratum: Conditions for synchronisation and corresponding user capacities for spread-spectrum multiple-access systems
104
Erratum: Conductor admittance in transverse TEM filters and slow-wave structures
105
Erratum: Consultancy
106
Erratum: Contactless nondestructive technique for the measurement of minority-carrier lifetime and diffusion length in silicon
107
Erratum: Continuation of discussion on Professor Forbes´s paper on "Some electric lighting central stations in Europe, and their lessons"
108
Erratum: Continuously equivalent networks in state space
109
Erratum: Contribution of reflector profile errors to antenna sidelobe radiation
110
Erratum: Contribution to the study of metal contacts on semiconductor real surfaces
111
Erratum: Control by digital computer of multiterminal h.v. d.c. system under fault conditions
112
Erratum: Control of power on a large diesel-electric locomotive of new design
113
Erratum: Control theory: Modern Control Theory and Computing
114
Erratum: Convergence behaviour of the first-order multisampling digital tanlock loop
115
Erratum: Convolutional coding for BPSK system with orthogonal sounding tone on fast Rayleigh fading channel
116
Erratum: Copper drag on commutators
117
Erratum: Corona, breakdown and humidity in the rod-plane gap
118
Erratum: Corporate financial models: a survey
119
Erratum: Correction factors for the determination of optical-fibre refractive-index profiles by the near-field scanning technique
120
Erratum: Correction to "Dual-Mode IVUS Catheter for Intracranial Image-Guided Hyperthermia: Feasibility Study" [Nov 10 2572-2584]
121
Erratum: Correction To: "Unsupervised Segmentation Of RF Echo Into Regions With Different Scattering Characteristics", Vol. 45, No. 3, P. 779
122
Erratum: Corrections to "Demonstration of second-harmonic IVUS feasibility with focused broadband miniature transducers" [May 10 1077-1085]
123
Erratum: Correlation-multiplex data-transmission system
124
Erratum: Correlator performance and the squared coherency
125
Erratum: Cost of electrical energy
126
Erratum: Counter-clockwise reflection-coefficient behaviour on a Smith chart
127
Erratum: Coupled mode analysis of wavefront properties of phased array diode lasers
128
Erratum: Coupled-resonator acoustic-surface-wave filter
129
Erratum: Coupling efficiency and sensitivity of an LED to a single-mode fibre
130
Erratum: Criterion for the stability of a fourth-order position control system
131
Erratum: Criterion for the stability of all moments of a particular stochastic system
132
Erratum: Crosspolarisation measurements at 11 GHz
133
Erratum: Crosspolarisation measurements at 11 GHz
134
Erratum: Current crowding effects in GaAs/AlGaAs heterojunction phototransistors
135
Erratum: Current mechanism of tunnel m.i.s. solar cells
136
Erratum: Current-controlled negative-resistance circuit
137
Erratum: Current-voltage conveyor
138
Erratum: Cutoff frequencies of W-type fibre with polynomial profile core
139
Erratum: Cylindrical surface waveguide modes using a surface impedance dyadic method
140
Erratum: D.D.A. register transfers for 3rd-order Kutta integration
141
Erratum: Dark-currents characterisation in charge-coupled devices
142
Erratum: Data-transmission characteristics of railway track
143
Erratum: Deformation-free overgrowth of InGaAsP DFB corrugations
144
Erratum: Depletion-mode m.o.s.f.e.t. model including a field-dependent surface mobility
145
Erratum: Describing function applied to HVDC systems harmonic instability
146
Erratum: Describing function of the diurnal variation of ionospheric nondeviative absorption
147
Erratum: Describing functions, circle criteria and multipleloop feedback systems
148
Erratum: Design and performance of a low crosstalk directional coupler switch
149
Erratum: Design and use of contactors for motor control
150
Erratum: Design of an active distributed RC lowpass filter using exponential lines
151
Erratum: Design of c.c.d. delay lines with floating-gate taps
152
Erratum: Design of elliptic digital filters: prescribed specifications
153
Erratum: Design of loudspeaker grilles
154
Erratum: Design of nonrecursive digital filters with linear phase
155
Erratum: Design of optimal systems by a frequency-domain technique
156
Erratum: Design of recursive digital filters approximating to arbitrary prescribed magnitude responses
157
Erratum: Design of stochastic optimal feedback control systems
158
Erratum: Design of synchronous reference frame phase-locked loop with the presence of dc offsets in the input voltage
159
Erratum: Design of twin-T single amplifier building block with prescribed values of capacitors and minimum gain-sensitivity product
160
Erratum: Design technique for microwave-transistor power amplifiers
161
Erratum: Detection of the commutating condition in a d.c. machine
162
Erratum: Determination of aerial far-field radiation patterns from near-field measurements
163
Erratum: Determination of the complex dielectric constant, electric field and conductivity at the boundary of ionised gas
164
Erratum: Determination of the parameters of a 2-phase drag-cup accelerometer
165
Erratum: Development, design and use of ripple control
166
Erratum: Developments for medium-capacity urban public transport
167
Erratum: Developments of reflection mode liquid crystal light values using Bi12SiO20 as the photoconductor
168
Erratum: Dielectric breakdown of supercritical helium
169
Erratum: Dielectric Green´s function for parameters of microstrip
170
Erratum: Dielectric loading of corrugated waveguides
171
Erratum: Dielectric-ring-loaded waveguide feed
172
Erratum: Differential measurement technique for evaluating microstrip line attenuation
173
Erratum: Differential phase error in pulse-width-modulated TV transmission systems
174
Erratum: Diffraction by a deeply modulated random-phase screen
175
Erratum: Diffraction-optimised shaped-beam reflector antennas
176
Erratum: Diffusion in semiconductors
177
Erratum: Digital filtering using logarithmic arithmetic
178
Erratum: Digital lattice filters with reduced number of tap-multipliers
179
Erratum: Digital processing technique for suppressing the interfering outputs in the image from an inline hologram
180
Erratum: Digital simulation of nonlinear dynamic systems using standard FORTRAN
181
Erratum: Digital-filter 2nd-order element with low quantising noise for poles and zeros at low frequencies
182
Erratum: Digital-summation threshold-logic gates: a new circuit element
183
Erratum: Direct frequency modulation of a semiconductor laser by acoustic waves
184
Erratum: Direct measurement of the frequency-modulation characteristics of a coupled-cavity laser
185
Erratum: Direct method of determining equivalent-step-index profiles for monomode fibres
186
Erratum: Direct streak-camera observation of picosecond gain-switched optical pulses from a 1.5 μm semiconductor laser
187
Erratum: Direct two´s-complement algorithm for XY ± Z
188
Erratum: Direct-gap group IV semiconductors based on tin
189
Erratum: Discharge of m.n.o.s. structures
190
Erratum: Discrete time MRAS with reduced implementation complexity
191
Erratum: Discrete vairable structure controller for load frequency control of multiarea interconnected power systems
192
Erratum: Discrete-time systems with interwoven transfers
193
Erratum: Discussion on "Electric lighting from central stations, with special reference to the Chelsea system"
194
Erratum: Discussion on "On a new form of lightning-protector for telegraph lines and apparatus"
195
Erratum: Discussion on "On Clamond´s thermo-electric battery"
196
Erratum: Discussion on "On lightning-guards for telegraphic purposes, and on the protection of cables from lightning"
197
Erratum: Discussion on ´Feasibility study of Monte Carlo modelling techniques for distributed-parameter systems´
198
Erratum: Discussion on ´Starting methods for generator/motor units employed in pumped storage stations´ and ´Investigation into damping-torque coefficients and stability of a 2-synchronous-machine system employed in synchronous starting´
199
Erratum: Discussion on ´Statistical model for single-unit and multiunit circuit breakers´
200
Erratum: Discussion on ¿On lightning and lightning conductors¿
201
Erratum: Dislocation-limited minority-carrier lifetime in n-type GaP
202
Erratum: Dispersion characteristics of a ferrite microstrip by a transverse-mode-matching technique
203
Erratum: Dispersionless coupled microstrip over fused silica-like anisotropic substrates
204
Erratum: Dispersionless coupled microstrip over fused silica-like anisotropic substrates
205
Erratum: Distributed mailbox arrangement which facilitates task communication in a multimicroprocessor system
206
Erratum: Disturbance localisation in linear time-invariant multivariable systems
207
Erratum: Divided winding-rotor synchronous generator
208
Erratum: Double-channel, frequency-steered acoustic transducer with 2-D imaging capabilities [Jul 11 1430-1441]
209
Erratum: Double-flame VAD process for high-rate optical preform fabrication
210
Erratum: Drive system philosophy for mass minimisation of battery-powered vehicles
211
Erratum: Dual gate GaAs m.e.s.f.e.t. phase shifter with gain at 12 GHz
212
Erratum: Dyadic symmetry and Walsh matrices
213
Erratum: E&P discrimination
214
Erratum: E.I.R.P. allocation for a nonlinear satellite channel with multiple transmit beams and carriers
215
Erratum: Easy calculation of power spectra for multi-h phase-coded signals
216
Erratum: Economic comparisons in planning for electricity supply
217
Erratum: Economic comparisons in planning for electricity supply
218
Erratum: Economical RC active lossy ladder filters
219
Erratum: Economical realisation of asynchronous sequential circuits using random-access memories
220
Erratum: Editorial
221
Erratum: Efect of element directivity on adaptive beamforming applied to high-frame-rate ultrasound
222
Erratum: Effect of adding DC-offset estimation integrators in there-phase enhanced phase-locked loop on dynamic performance and alternative scheme
223
Erratum: Effect of adjacent channel interference and frequency-selective fading on outage of digital radio
224
Erratum: Effect of armature banding on the commutation of a d.c. machine
225
Erratum: Effect of chromatic dispersion on pulses of arbitrary coherence
226
Erratum: Effect of correlated noise on error probability of binary frequency shift keying with limiter-discriminator-detector and narrowband filters
227
Erratum: Effect of different methods of f.m.-waveform generation on the sidelobe structure of a compressed pulse
228
Erratum: Effect of illumination and gate bias on flat-band voltage in plasma CVD Si-N on n-Si MIS structure
229
Erratum: Effect of neutron and gamma irradiation on the low-frequency noise in GaAs m.e.s.f.e.t.s
230
Erratum: Effect of pollution on high-voltage outdoor insulators
231
Erratum: Effect of surface conditions on the electric field in air cavities [Feb 2013 71-81]
232
Erratum: Effect of vibration on s.a.w.-oscillator noise spectra
233
Erratum: Effects of binary quantisation when using the fast Fourier transform to compute power spectral estimates
234
Erratum: Effects of diode-package cutoff frequency on TRAPATT operation
235
Erratum: Effects of filtering on statistics of rain-induced fade durations
236
Erratum: Effects of internal discharges on prospective life and overvoltage-withstand behaviour of e.h.v. oil-impregnated paper bushings
237
Erratum: Effet du sens de croissance du champ électrique sur les conditions de claquage par avalanche (Directional effect of electric-field growth on a avalanche-breakdown conditions)
238
Erratum: Efficiency enhancement in the conversion into the magnetostatic mode utilising a specially designed coiled transducer
239
Erratum: Efficient codes for single error detection and partial single error correction
240
Erratum: Efficient three-wavelength-output SAW multistrip beam compressor for convolver applications
241
Erratum: Efficient waveguide Bragg-deflection grating on LiNbO3
242
Erratum: Eigenfunction solution of a class of TEM transmission line
243
Erratum: Electrical breakdown of small air gaps bounded by dielectric surfaces using 500/3000 μs surges
244
Erratum: Electrical characterisation of transferred-electron devices
245
Erratum: Electrical energy - a policy for the future
246
Erratum: Electrically induced mechanical oscillations in plane-electrode system
247
Erratum: Electricity-supply distribution - trimming and efficiency
248
Erratum: Electromagnetic field in the focal region of wide-angular annular lens and mirror systems
249
Erratum: Electromagnetic wave propagation in cylindrical waveguides containing gyromagnetic media
250
Erratum: Electromagnetic wave propagation in cylindrical waveguides containing gyromagnetic media. Part 2
251
Erratum: Electromagnetic wave propagation in cylindrically stratified isotropic media
252
Erratum: Electro-optic Y-junction modulator/switch
253
Erratum: Emitter-current-limited injection in negative-mobility semiconductors in the limit of zero doping
254
Erratum: Encoding standards for 2-channel surround sound
255
Erratum: Encryption with keyed random permutations
256
Erratum: Enhancement-mode metal/(Al,Ga)As/GaAs buried-interface field-effect transistor (BIFET)
257
Erratum: Enumeration of all cutsets of a graph
258
Erratum: Envelope probability density function of the sum of signal, noise and interference
259
Erratum: Equivalent circuit of transistor mixer
260
Erratum: Equivalent network for bridged crystal filters
261
Erratum: Equivalent-circuit parameters of a cavity resonator
262
Erratum: Equivalent-circuit parameters of a cylindrical-cavity resonator
263
Erratum: Error patterns in correlators with four-level quantisation
264
Erratum: Error performance of frequency-hopped d.p.s.k. system
265
Erratum: Error rate performance of narrowband multilevel CPFSK signals
266
Erratum: Error rates of phase-modulated signals in multilink system with interference
267
Erratum: Error-correcting algorithm for adapting a hyperelliptical decision surface for pattern recognition
268
Erratum: Errors caused by clutter in amplitude-comparison direction-finding systems
269
Erratum: Errors-and-erasures decoding of binary majority-logic-decodable codes
270
Erratum: ESR study on loss increase of 500°C heat-treated Ge-doped optical fibres
271
Erratum: Estimating the correlation coefficient of highly correlated clutter
272
Erratum: Estimation of fringing capacitance of electrodes on s.i. GaAs substrate
273
Erratum: Estimation of linearly constrained parameters via the Kalman filter
274
Erratum: Ether, electricity, and ponderable matter
275
Erratum: Evaluating the impulse response of a first-order 2-D recursive filter
276
Erratum: Evaluation of focal fields and radiation characteristics of a dual-offset reflector antenna
277
Erratum: Evaluation of nonperiodic autocorrelation parameters for maximal-length sequences
278
Erratum: Evaluation of topological formulas using digital computers
279
Erratum: Evolution of automatic devices in conjunction with signalling on the SCNF
280
Erratum: Exact design of stray-insensitive switched-capacitor lowpass ladder filters from unit-element prototypes
281
Erratum: Exact image method for field calculation in horizontally layered medium above a conducting ground plane
282
Erratum: Examination assessment
283
Erratum: Excitation of multimode guide by stripline-fed slots
284
Erratum: Excitation of the PE20 and PM11 modes in a dielectric-loaded trough waveguide by a dielectric-loaded rectangular waveguide
285
Erratum: Excitation rectifier schemes for large generators
286
Erratum: Experimental determination of attenuation in corrugated circular waveguides
287
Erratum: experimental evaluation of spectral-based quantitative ultrasound imaging using plane wave compounding [Nov 14 1824-1834]
288
Erratum: Experimental study of the radar cross-section of maritime targets
289
Erratum: Extending the application potential of low-frequency correlators
290
Erratum: F.M. click rates
291
Erratum: Fabrication of twin-rectangular-cored fibre couplers
292
Erratum: Factors affecting the design and operation of redox batteries
293
Erratum: Fast algorithm for transversely inhomogeneous optical fibres using the power method and the fast Fourier transform
294
Erratum: Fast algorithms for continuous estimation of mean value of a random variable
295
Erratum: Fast b.c.d. multiplier
296
Erratum: Fast b.c.d. multiplier
297
Erratum: Fast b.c.d./binary adder/subtractor
298
Erratum: Fast computation of discrete cosine transform through fast Hartley transform
299
Erratum: Fast convergence method for Lloyd-Max quantiser design
300
Erratum: Fast current pulse m.o.s. deep-depletion technique for profiling thin epitaxial and ion-implanted layers
301
Erratum: Fast inverse Laplace transformation of functions containing one multiple pole
302
Erratum: Fast polynomial transform and its implementation by computer
303
Erratum: Fast s.a.w.-based discrete Fourier transformer
304
Erratum: Fast signal acquisition by an adaptive antenna moving in a multipath field
305
Erratum: Fast transform procedure for the generation of near-minimal covers of Boolean functions
306
Erratum: Feedback stability of open-loop unstable systems: contraction-mapping approach
307
Erratum: Fibre couplers composed of unequal cores
308
Erratum: Fibredyne systems for passive or semipassive fibre-optic sensors
309
Erratum: Fibre-optic delay-line devices for r.f. signal processing
310
Erratum: Field configuration of the TMc01 mode in an elliptical waveguide
311
Erratum: Field emission at 9000 Gc/s in a superconducting cavity
312
Erratum: Field mapping using a computer: compensation for infinite space
313
Erratum: Field matching through volume suppression
314
Erratum: Filtre recursif nonlineaire
315
Erratum: Finite-element analysis of flat overlay waveguides for acoustic surface waves using acoustic surface impedance
316
Erratum: Finite-element analysis of leaky waveguide antennas
317
Erratum: Finite-element solution of arbitrarily nonlinear, graded-index slab waveguides
318
Erratum: Fitting of measured data to a known relationship
319
Erratum: Flashover on d.c. machines
320
Erratum: Flexible digital correlator
321
Erratum: Flicker noise in silicon planar transistors
322
Erratum: Floating integrator technique for switched-capacitor circuits employing reset cycles
323
Erratum: Floating voltage-controlled resistors in CMOS technology
324
Erratum: Forces in d.c. machines
325
Erratum: Formulae for convertors
326
Erratum: Formulas for linear optimal control over a finite or infinite interval
327
Erratum: Fourier, Laplace and Hilbert transforms
328
Erratum: Fourier-series representation for phase density of sum of signal, noise and interference
329
Erratum: Frequency response identification of structure of nonlinear systems
330
Erratum: Frequency response of 2-dimensional digital filters
331
Erratum: Frequency response of a multiplexed charge-transfer delay line
332
Erratum: Frequency tuning design for vibration-driven electromagnetic energy harvester
333
Erratum: Frequency/depth-penetration considerations in hyperthermia by magnetically induced currents
334
Erratum: Front-to-back ratio of a smooth metallic-wall conical horn
335
Erratum: Fully differential bilinear integrator for SC filters
336
Erratum: Fundamental mode waveguide at submillimetre wavelengths
337
Erratum: Further remarks on boundary conditions of plasma models in a bounded region
338
Erratum: Further results on maximally flat nonrecursive digital filters
339
Erratum: Fused couplers of arbitrary cross-section
340
Erratum: Fusion splicing between optical circuits and optical fibres
341
Erratum: GaAs Schottky diodes with linear log I/V behaviour over eight decades of current
342
Erratum: Gain adjusting an optimal regulator
343
Erratum: Gain-loss measurements on a carbon-fibre composite reflector antenna
344
Erratum: Gapped solenoid as a means of producing a highly uniform magnetic field over an extended volume
345
Erratum: Gaussian-filter approximation
346
Erratum: General analysis of nonmonotonic lowpass filters having multiple pairs of imaginary-axis zeros with weighted least-mean-square error characteristic
347
Erratum: General expression for the group delay of digital filters
348
Erratum: General model for defect formation in silicon dioxide
349
Erratum: General theory of solidrotor induction machines
350
Erratum: Generalisation of the bandpass-lowpass analogy and its application to a phase-shift-keying signal
351
Erratum: Generalised analysis for steady-state characteristics of DC Commutator
352
Erratum: Generalised Chebyshev lowpass filters
353
Erratum: Generalised computational method for reliability analysis of electric power installations
354
Erratum: Generalised crosscorrelator with data-estimated weighting function: a simulation analysis
355
Erratum: Generalised decision feedback equalisation of digital communication channels
356
Erratum: Generalised distributions of nonuniformity of hypergeometric transmission line
357
Erratum: Generalised maximally flat approximation
358
Erratum: Generalised patterns of nonuniformity for solvable algebraic and transcendental transmission lines
359
Erratum: Generalised treatment of single-phase motors with the aid of a digital computer
360
Erratum: Generalised-function representations of nonlinear devices with Gaussian inputs
361
Erratum: Generating function for spanning trees
362
Erratum: Generation and design of canonic grounded capacitor variable frequency RC-active oscillators
363
Erratum: Generation of short pulses from CW light by influence of crossphase modulation (CPM) in optical fibres
364
Erratum: Geometric description of bridge rectifier operational modes using regular polygons
365
Erratum: Glass-cavity-stabilised Gunn oscillator
366
Erratum: Goos-Hÿnchen shift for leaky rays on step-index waveguides
367
Erratum: Groove GaInAsP laser on semi-insulating InP
368
Erratum: Group delay in graded-index fibres with non-power-law refractive profiles
369
Erratum: Guided modes of a parabolic-core slab waveguide
370
Erratum: Guiding and radiation characteristics of planar waveguides
371
Erratum: Gunn-effect cavity-controlled generator
372
Erratum: Gyrator frequency modulator
373
Erratum: Hand-held tool for optical-fibre end preparation
374
Erratum: Harmonic reduction in d.c.-ripple reinjection
375
Erratum: Hazleton Memorial Library-additions
376
Erratum: Heterodyne measurements of submillimeter laser spectrometer frequencies
377
Erratum: High frequency microstrip branch-line coupler design with T-junction discontinuity compensation
378
Erratum: High return loss connector design without using fibre contact or index matching
379
Erratum: High-Δn, small-core single-mode fibres for efficient nonlinear optical effects
380
Erratum: High-current vacuum arcs. Part 1: An experimental study
381
Erratum: High-efficiency Bragg cells in gallium phosphide
382
Erratum: High-frequency behaviour of microstrip open-circuit terminations
383
Erratum: High-frequency intensity noise behaviour during accelerated life tests of narrow-stripe proton-isolated DH AlGaAs lasers for optical communications
384
Erratum: High-frequency pulse rise in slightly detuned synchronous single-circuit amplifiers
385
Erratum: Highly selective RC-active filters using Mucroer polynomials
386
Erratum: High-Q factor circuit with reduced sensitivity
387
Erratum: High-quality transistorised gyrator
388
Erratum: High-sensitivity low-frequency magnetometer using magnetostrictive primary sensing and piezoelectric signal recovery
389
Erratum: High-speed Bode- and Nichols-diagram plotter
390
Erratum: High-stability acousto-optical devices using bulk acoustic waves in TeO2
391
Erratum: High-voltage switchgear
392
Erratum: Hole and electron concentrations in a p-n-abrupt-junction diode as obtained by exact computer solution of the differential equations
393
Erratum: Human factors in the control of road vehicles
394
Erratum: Hybrid linear motor
395
Erratum: Hybrid modes of graded-index optical fibres
396
Erratum: Image data compression, using 2-D lattice modelling method
397
Erratum: Image of a coil in relation to the gauging of distance of metal surfaces
398
Erratum: Image-cancelling mixers
399
Erratum: Immittance transformation using precision air-dielectric coaxial lines and cables
400
Erratum: Implementation of a moving-target indicator by bucket-brigade circuits
401
Erratum: Implementation of convolution and Fourier transforms using 1-bit systolic arrays
402
Erratum: Implementation of some ternary operators with c.m.o.s. integrated circuits
403
Erratum: Implementation of the discrete Fourier transform on 2-dimensional systolic processors
404
Erratum: Improved binary multiplication system
405
Erratum: Improved method for evaluating the static parameters of the Ebers--Moll transistor model
406
Erratum: Improved microwave refraction technique for measuring electron-density distribution in a transient plasma column
407
Erratum: Improved sequential linear prediction by selective time-domain coefficient extraction
408
Erratum: Improved systolic array for linear discriminant function classifier
409
Erratum: Improvements in steam temperature control on a modern oil-filed power-station boiler
410
Erratum: Improving the large-signal models of bipolar transistors by dividing the intrinsic base into two lateral sections
411
Erratum: Improving the large-signal models of bipolar transistors by dividing the intrinsic base into two lateral sections
412
Erratum: Improving the transient-response characteristics of pulse filters with parabolic distribution of poles
413
Erratum: Impulse flashover along the outer surface of a cylindrical dielectric solid with a gas layer inside
414
Erratum: Inclusion of amplifier finite gain and bandwidth in analysis of switched-capacitor filters
415
Erratum: Inclusion of diffusion in the space-charge theory of Kino and Robson
416
Erratum: Inductive loading of the bias path in impatt-diode circuits
417
Erratum: Inductorless current conveyor allpass filter using grounded capacitors
418
Erratum: Inferential measurement of fluid flow from the cross-correlation of temperature fluctuations in the system
419
Erratum: Influence of ambient-temperature variations in two gyrator circuits
420
Erratum: Influence of an airgap on the measurement of dielectric constant by a parallel plate dielectric resonator
421
Erratum: Influence of electric field on the resistivity of a particulate layer
422
Erratum: Influence of inclusions on domain-wall motion and power loss in oriented electrical steel
423
Erratum: Influence of interface states on the charge injection in m.n.o.s. memory devices
424
Erratum: Influence of mode coupling on the noise properties of multimode-fibre systems
425
Erratum: Information
426
Erratum: Input admittance of a circular waveguide aperure loaded with an iris
427
Erratum: Instrument transformers
428
Erratum: Integral analysis of hybrid coupled semiconductor phase shifters
429
Erratum: Integratable gyrator using m.o.s. and bipolar transistors
430
Erratum: Integrated bandpass filters
431
Erratum: Integrated nonuniform thin-film bandpass filter
432
Erratum: Intensity modulation of light transmitted in curved optical fibres
433
Erratum: Interaction of high-frequency sound with fibre-guided coherent light
434
Erratum: Interference between station identities on WISDOM
435
Erratum: Intermodulation and a.m./p.m. distortion in f.m./f.d.m. radio systems during 2-path propagation
436
Erratum: Intermodulation and harmonic distortion in InGaAsP lasers
437
Erratum: Invention of television
438
Erratum: Inversion-controlled switching mechanism of m.i.s.s. devices
439
Erratum: Investigations on operation of fully controlled thyristor convertors
440
Erratum: Ion oscillations in a cold positive-ion electron-beam thermal electron plasma
441
Erratum: Irregular fields, nonconvex shapes and the point-matching method for hollow waveguides
442
Erratum: Iterative procedure for generating trees and directed trees
443
Erratum: Large a.c. motors
444
Erratum: Large area characterisation of urban UHF multipath propagation and its relevance to the performance bounds of mobile radio systems
445
Erratum: Large-signal direct modulation of injection lasers
446
Erratum: Laser oscillations at submillimetre wavelengths from pulsed gas discharges in compounds of hydrogen, carbon and nitrogen
447
Erratum: Launching a surface wave over the Earth
448
Erratum: leakage-based distributed minimum-mean-square error beamforming for relay-assisted cloud radio access networks
449
Erratum: Least pth and minimax objectives for automated network design
450
Erratum: LED pulse distortion in single-mode fibres near the wavelength of zero dispersion
451
Erratum: Level-shift compensation in m.o.s. bucket-brigade circuits operated in an analogue mode
452
Erratum: Limits to power transmission in optical fibres
453
Erratum: Linear amplification using envelope feedback
454
Erratum: Linear antenna arrays with broadened nulls
455
Erratum: Linear system reduction by continued-fraction expansion about s = 0 and s = a alternately
456
Erratum: Load flow solution for ill-conditioned power systems by quadratically convergent Newton-like method
457
Erratum: Load-curtailment model for economic loading of thermal generation
458
Erratum: Locating an oscillating magnetic dipole in the earth
459
Erratum: Logical circuits for use in iterative arrays
460
Erratum: Logicfree data channels
461
Erratum: Logicfree data channels
462
Erratum: Long-wave behaviour of the Beverage wave aerial
463
Erratum: Loss of lock in long-loop phase-locked receivers in the presence of large interfering carrier
464
Erratum: Lossless progressive image transmission by residual error vector quantisation
465
Erratum: Loudness ratings of telephone speech paths
466
Erratum: Low temperature electroplated Au--SnNi--Au ohmic contacts on n type GaAs
467
Erratum: Low-cost reciprocal-law circuit
468
Erratum: Low-distortion high-output class B current convertor using error feedforward
469
Erratum: Low-distortion high-output class B current convertor using error feedforward
470
Erratum: Low-frequency correlator using a bucket-brigade analogue delay line
471
Erratum: Low-frequency impedance of a circular loop over a conducting ground
472
Erratum: Low-loss antiresonant reflecting optical waveguide on Si substrate in visible-wavelength region
473
Erratum: Low-noise cryogenic amplifier based on the Josephson effect
474
Erratum: Low-noise millimetre-wave mixer diodes: results and evaluation of a test programme
475
Erratum: Low-resistance thermometry
476
Erratum: Low-threshold high-speed 1.55 μm vapour phase transported buried heterostructure lasers (VPTBH)
477
Erratum: Lucky drift models of multilayered structures and approximate forms of lucky drift expressions
478
Erratum: Lyapunov estimates of oscillator transients in p.c.m. systems
479
Erratum: Lyapunov functionals for a class of wave equations
480
Erratum: Magnetic permeance of identical double slotting. Deductions from analysis by F.W. Carter
481
Erratum: Magnetically tunable wideband magnetostatic-surface-wave filter using Ga-YIG film
482
Erratum: Magnetostatic surface modes of a y.i.g. slab
483
Erratum: Magnetostatic surface waves on a y.i.g. slab
484
Erratum: Mapping eddy currents using a resistance network
485
Erratum: M-ary continuous phase frequency shift keying with modulation index 1/M
486
Erratum: Material dispersion in lightguide glasses
487
Erratum: Matrix Coates flow graphs
488
Erratum: Matrix formulation of corrugated feeds by using impedance boundary conditions
489
Erratum: Maximum available power gain of active 2-ports
490
Erratum: Maximum gain of Yagi--Uda arrays
491
Erratum: Maximum information capacity of fibre-optic waveguides
492
Erratum: Maximum Q factors for bandpass filters
493
Erratum: Mean acquisition time of active- and passivecorrelation acquisition systems for spread-spectrum communication systems
494
Erratum: Measurement arrangement for direct capacitance/surface-potential recording on m.o.s. capacitor
495
Erratum: Measurement of eddy-current conductivity
496
Erratum: Measurement of mutual scattering between spheres by use of microwave open resonator
497
Erratum: Measurement of some dynamic characteristics on overhead equipment for railway electrification
498
Erratum: Measurement of thickness-shear-stress distribution of the oscillating planoconvex AT-cut quartz-crystal resonator
499
Erratum: Method for designing recursive digital filters with short wordlength
500
Erratum: Method for the computation of higher-order sensitivity coefficients for a linear network: frequency-domain case
501
Erratum: Method for the computation of higher-order sensitivity coefficients for a linear network: frequency-domain case
502
Erratum: Method of calculating the electromagnetic field and power losses in ferromagnetic materials, taking into account magnetic hysteresis
503
Erratum: Method of calculation of the transient electromagnetic field in ferromagnetic materials for the known vector of induction B on the surface
504
Erratum: Method of generating low-sensitivity RC active circuits
505
Erratum: Method of measuring time delay
506
Erratum: Method of using data from computer simulations to test protection equipment
507
Erratum: Metrication
508
Erratum: Microbending loss of multimode square-law fibres: a ray theory
509
Erratum: Microprocessor interfaces
510
Erratum: Microstrip TRAPATT oscillator
511
Erratum: Microwave applicator for tubular dielectric materials
512
Erratum: Microwave emission and acoustoelectric excitation in differently orientated nInSb
513
Erratum: Microwave field-effect transistors - theory, design and applications, 2nd edn.
514
Erratum: Microwave Hall-mobility measurements on vanadium bronze V2O5 (Na0.33V2O5 and Cu0.0083V2O5)
515
Erratum: Microwave hyperthermia for cancer therapy
516
Erratum: Microwave properties of liquids using a modified cavity perturbation technique
517
Erratum: Minimal realisation of a symmetric transfer function matrix using Markov parameters and moments
518
Erratum: Mismatched linear active 2-ports
519
Erratum: Mitigation of power quality problems using distribution static synchronous compensator: a comprehensive review
520
Erratum: Modal dispersion of optical fibres with a composite ¿-profile graded-index core
521
Erratum: Mode analysis of optical fibres using computer-generated matched filters
522
Erratum: Model for multimode picosecond dynamic laser chirp based on transmission line laser model
523
Erratum: Model selection for computer simulation of digital m.o.s.f.e.t. l.s.i. circuits
524
Erratum: Models of modelocking a laser diode in an external resonator
525
Erratum: Modification of the p.r.b.n. crosscorrelation method to correct for the effect of nonlinearity
526
Erratum: Moisture control of cable environment with particular reference to surface troughs
527
Erratum: Monolithic v.c.c.s. for high-frequency RC active filters
528
Erratum: More about a thinning algorithm
529
Erratum: More aspects of quantisation noise associated with digital coding of colour-television signals
530
Erratum: MOS transconductors and integrators with high linearity
531
Erratum: Multi-aperture directional coupler using dissimilar transmission lines
532
Erratum: Multiconductor transmission-line model for the line-end coil of large AC machines
533
Erratum: Multi-frequency intravascular ultrasound (IVUS) imaging
534
Erratum: Multilevel single-error-correcting codes
535
Erratum: Multiloop mixer circuits
536
Erratum: Multipath propagation in line-of-sight links
537
Erratum: Multiple bridging faults in monotone networks
538
Erratum: Multiplexer logic circuit design using cubical complexes
539
Erratum: Multiplexing of interferometric sensors using phase-generated carrier techniques
540
Erratum: Multipole optical-fibre connector
541
Erratum: Multiport network analysis by matrix renormalisation: extension to four ports
542
Erratum: Multistage pulse-width-modulated inverter systems for generating stepped-voltage waveforms
543
Erratum: Muscle stimulator controlled by myoelectric signals
544
Erratum: Mutual capacitance between coplanar strips between earthed planes
545
Erratum: Narrowband digital voice communications over a meteor burst channel
546
Erratum: Narrow-beam antennas using an artificial dielectric medium with permittivity less than unity
547
Erratum: Negabinary carry-look-ahead adder and fast multiplier
548
Erratum: Negative-impulse breakdown in compressed air
549
Erratum: Negative-resistance amplifiers using three-terminal Gunn devices
550
Erratum: Network conventions
551
Erratum: New acoustic-surface-wave zero-temperature cuts in Tl3VS4
552
Erratum: New active RC Bode-type variable equaliser
553
Erratum: New amorphous-silicon electrically programmable nonvolatile switching device
554
Erratum: New analogue multiplier-divider
555
Erratum: New analysis of LED to single-mode fibre coupling
556
Erratum: New analysis of LED to single-mode fibre coupling
557
Erratum: New analytical solution for a current/voltage characteristic of space-charge-limited currents with a nonlinear velocity-field relationship
558
Erratum: New angle-of-arrival estimator: comparative evaluation applied to the low-angle tracking radar problem
559
Erratum: New approach to analyse strip-and microstrip-like transmission lines with anisotropic substrates having a tilted optical axis
560
Erratum: New asymptotic solution for the electromagnetic fields of a dipole over a stratified medium
561
Erratum: New asymptotic solution for the electromagnetic fields of a dipole over a stratified medium
562
Erratum: New cholesteric liquid crystals for displays
563
Erratum: New class of antennas in conducting media
564
Erratum: New class of pseudorandom ternary sequences
565
Erratum: New classes of complementary signals
566
Erratum: New commutated Doppler microwave landing system
567
Erratum: New criterion of realisability
568
Erratum: New CW imaging mode for scanning acoustic microscopy
569
Erratum: New DC-free line code of minimum bandwidth with increased eye width
570
Erratum: New definition of multiple-root sensitivity
571
Erratum: New definitions for loudness ratings
572
Erratum: New equivalent circuit of the p-n junction in the frequency-multiplying mode
573
Erratum: New equivalent circuits for elementary piezoelectric transducers
574
Erratum: New feedback-stabilised analogue multiplier
575
Erratum: New inductance and capacitor floatation schemes using current conveyors
576
Erratum: New method for measuring ultrawide frequency response of optical detectors
577
Erratum: New method for the display of three-dimensional vector fields
578
Erratum: New method of obtaining reduced-order models for linear multivariable systems
579
Erratum: New pipelined vector-reduction arithmetic unit for FIR filter implementation
580
Erratum: New preprocessing technique for digital facsimile transmission
581
Erratum: New products
582
Erratum: New results of an experimental sampling system for recording fast single events
583
Erratum: New single-mode single-polarisation optical fibre
584
Erratum: New subnanosecond pulse-generator circuit employing two step-recovery diodes
585
Erratum: New technique for analysing planar waveguides with finite metallisation thickness
586
Erratum: New technique to improve antenna measurements in the presence of site reflections
587
Erratum: New theory of internal Q switching in semiconductor lasers
588
Erratum: New thermometric method of measuring power losses in solid metal elements
589
Erratum: New u(E) relationship for GaAs
590
Erratum: New ultra-low-noise avalanche photodiode with separated electron and hole avalanche regions
591
Erratum: News
592
Erratum: Noise in InSb double-injection space-charge-limited diodes
593
Erratum: Nonabsorbing mirror (NAM) CDH-LOC diode lasers
594
Erratum: Nondestructive film thickness measurement on industrial diamond
595
Erratum: Nondestructive SAW material attenuation via acoustic microscopy
596
Erratum: Nonlinear scattering of microwaves by a travelling-wave density-modulated plasma column
597
Erratum: Nonlinear theory of long-range-interaction resonant generators
598
Erratum: Nonperiodic sampling and identifiability
599
Erratum: Normalisation of Fourier descriptors of planar shapes
600
Erratum: Notation describing the fault-related behaviour of logic modules
601
Erratum: Note on digital-summation threshold-logic gates
602
Erratum: Note on the computer inversion of Fourier transforms
603
Erratum: Notes on electric tramways
604
Erratum: Novel active filters using amplifier pole
605
Erratum: Novel active-compensated weighted summer
606
Erratum: Novel application of generalised current conveyor
607
Erratum: Novel finite-element formulation without any spurious solutions for dielectric waveguides
608
Erratum: Novel lossless synthetic floating inductor employing a grounded capacitor
609
Erratum: Novel lossless tunable floating FDNR simulation using two current conveyors and a buffer
610
Erratum: Novel microwave GaAs field-effect transistors
611
Erratum: Novel technique for the linearisation of charge-coupled devices
612
Erratum: Novel trial field of single-mode graded-index fibres usable for non-Gaussian field distributions
613
Erratum: N-path filter sections with biquadratic transfer functions
614
Erratum: Nuclear safety chains
615
Erratum: Numerical algorithm for pole-sensitivity study of LC ladder networks
616
Erratum: Numerical analysis of forward and reverse bias potential distribution in a 2-dimensional p-n junction with applications to capacitance calculations
617
Erratum: Numerical analysis of two-dimensional piezoelectric waveguides for surface acoustic waves by finite-element method
618
Erratum: Numerical analysis on elastic waveguides with elliptical cross-section by mode-matching method
619
Erratum: Numerical calculations of the capacitance of linearly graded Si p-n junctions
620
Erratum: Numerical method for the solution of waveguide-discontinuity problems
621
Erratum: Numerical simulation of the dynamics of field impoverishment modes
622
Erratum: Numerical test of stability of large sparse matrices and dynamical systems
623
Erratum: Numerically stable algorithm for standard controllability form determination
624
Erratum: Obituary
625
Erratum: Observation of second-harmonic generation from a Langmuir-Blodgett monolayer of a merocyanine dye
626
Erratum: Occurrence of a singular Jacobian in filter design
627
Erratum: Offset spherical reflector with a low sidelobe radiation
628
Erratum: On certain properties of the electric vector potential in eddy-current problems. Part 2
629
Erratum: On dynamoes
630
Erratum: On lightning and lightning conductors
631
Erratum: On lightning, lightning conductors, and lightning protectors
632
Erratum: On multiplicative overflow detection in residue number system
633
Erratum: On some experiments in electrotyping with a dynamo-electric machine, carried out at the Ordnance Survey Office, Southampton
634
Erratum: On the co-ordination of circuit requirements, valve characteristics and electrode design
635
Erratum: On the derivative of the trace of a matrix quadratic form
636
Erratum: On the error rates of digital-modulation systems in the presence of impulsive noise
637
Erratum: On the scope of validity of the Manley-Rowe relations
638
Erratum: On the sensitivity of a system compensated by the inverse Nyquist array
639
Erratum: On the spectral dyadic Green´s function for stratified linear media - Application to multilayer MIC lines with anisotropic dielectrics
640
Erratum: On the systems of electric units
641
Erratum: Online optimisation of the free parameters in discrete adaptive control systems
642
Erratum: On-site investigation of electrohydraulic governors for water turbines
643
Erratum: Open-cavity resonator as high-Q microstrip circuit element
644
Erratum: Optical correlation in Bi12SiO20 at 632.8 nm
645
Erratum: Optical receiver with optical feedback
646
Erratum: Optimal control of synchronous-machine excitation by quasilinearisation techniques
647
Erratum: Optimisation of centroiding procedure for noisy measurements
648
Erratum: Optimisation of digital learning networks when applied to pattern recognition of mass spectra
649
Erratum: Optimisation of dimensions of single V-groove guide
650
Erratum: Optimisation of feed position and improved profile mapping of a reflector antenna from microwave holographic measurements
651
Erratum: Optimum control of linear systems in the presence of polynomial or sinusoidal disturbances
652
Erratum: Optimum design of an induction motor for operation with current source inverters
653
Erratum: Optimum longitudinal electro-optic effect in oblique-cut lithium-niobate plates
654
Erratum: Optimum packet size in a packet-switched data network
655
Erratum: Optimum sufficient conditions for the stability of linear multivariable systems
656
Erratum: Orthogonal decomposition of the 2-port network
657
Erratum: Output coefficient of synchronous machines. A new concept
658
Erratum: Output inductance of an emitter follower
659
Erratum: Output noise spectrum from demodulator in an optical PFM system
660
Erratum: Output-feedback control law for randomly disturbed multivariable system
661
Erratum: Overhead-line parameters for circuit-breaker application
662
Erratum: Overvoltage protection of gas insulated substations
663
Erratum: P.I.D. equivalent of optimal regulator
664
Erratum: Parallel image-processing system based on the TMS32010 digital signal processor
665
Erratum: Parallel-in/serial-out: a new approach for c.c.d. transversal filters
666
Erratum: Parallel-processing computer for pattern recognition
667
Erratum: Parallel-wire meander line deflection circuit for electron beams
668
Erratum: Parasitic insensitive toggle-switched capacitor and its applications to switched-capacitor networks
669
Erratum: Passive network as a complex-voltage generator in four quadrants
670
Erratum: Performance and testing of multi-unit circuit breakers switching low inductive currents
671
Erratum: Performance evaluation of a 512-QAM system in distorted channels
672
Erratum: Performance index based on the correlation between the responses of two systems
673
Erratum: Performance of a 2-element adaptive array by a maximum-signal/noise-ratio algorithm
674
Erratum: Performance of corrugated and dielectric-loaded metallic-conical horns
675
Erratum: Performance of feedback systems with nonlinear phase-advance compensators to Gaussian inputs
676
Erratum: Permanent magnets
677
Erratum: Phase centre of paraboloidal antennas
678
Erratum: Phase-plane analysis of simple Josephson junction model
679
Erratum: Phase-plane trajectories for linear-p.c.m.-oscillator control systems
680
Erratum: Photographic investigation of formative stage of electric breakdown in diverging fields
681
Erratum: Phototransistors in digital optical communications systems for 1¿1.6 ¿m wavelength
682
Erratum: Physical limitations on the size of superconducting transformers
683
Erratum: Planar Gunn-effect logic device with two separated cathodes
684
Erratum: Planning of distribution systems in developing countries
685
Erratum: Plasma-density determination from the phase shift in scattered radiation
686
Erratum: Plugging of capacitor motors
687
Erratum: Plug-in fibre-to-fibre coupler
688
Erratum: Polarisation fluctuation in optical-fibre submarine cable under 8000 m deep sea environmental conditions
689
Erratum: Pole assignment in linear control systems
690
Erratum: Power electronics, control of the electromechanical energy conversion process and some applications
691
Erratum: Power relationships in the acoustic amplifier
692
Erratum: Power spectral density of digital continuous phase modulation with correlated data symbols. Part 1: Autocorrelation function method, and Part 2: Rowe-Prabhu method
693
Erratum: Power spectrum of a pulse train specified by its probability-generating function
694
Erratum: Power spectrum of scrambled signal
695
Erratum: Power spectrum of the balanced digital signal generated by Markov source
696
Erratum: Practical transform techniques for error and erasure correction
697
Erratum: Prebreakdown phenomena in standard rod gaps subjected to impulse voltages
698
Erratum: Precision hardware circular-arc generation for computer graphic-display systems using line-segment data
699
Erratum: Preparation and properties of GaAs layers for novel f.e.t. structures
700
Erratum: Prime sequences: quasi-optimal sequences for OR channel code division multiplexing
701
Erratum: Prism coupling technique: a method for measurement of propagation constant and beat length in single-mode fibres
702
Erratum: Probability density function of amplitude scintillations
703
Erratum: Probability distribution of pseudorandom waveforms obtained from msequences
704
Erratum: Probability distribution of the crosscorrelation function of finite-duration single-bit random waveforms
705
Erratum: Probability-density function of output of single-bit cross-correlator for detecting Gaussian reflections in noise
706
Erratum: Problem of speech pulling and its implications for the design of phase-locked SSB radio systems
707
Erratum: Processing of InP MIS devices monitored via photoluminescence measurements
708
Erratum: Products of generalised functions
709
Erratum: Propagation characteristics of inhomogeneous dielectric-filled coaxial cables
710
Erratum: Propagation characteristics of magnetoelastic surface wave
711
Erratum: Propagation in two circular coaxial waveguides
712
Erratum: Propagation of an impulsive plane wave with arbitrary angle of incidence and polarisation in isotropic-plasma halfspace
713
Erratum: Properties of master/slave manipulators
714
Erratum: Proposals for installation practice of single-core cables
715
Erratum: Proposed high-efficiency spherical-reflector antenna
716
Erratum: Protective Relays: Their Theory and Practice ߝ Vol. 2
717
Erratum: Pulse dispersion in glass fibres
718
Erratum: Pulse response of 0°Z cut ADP modulators
719
Erratum: Pulsed frequency-response calculations for a digital control system
720
Erratum: Q band (38 GHz) varactor-tuned Gunn oscillators
721
Erratum: Q factor, Q stability and gain in active filters
722
Erratum: Quadrature-modulation-type lowpass and highpass filters
723
Erratum: Quantising noise spectra
724
Erratum: Quasistatic and nonequilibrium phenomena in m.o.s. structures under the influence of a constant gate-current bias
725
Erratum: Quick accurate design of a frequency-stabilised coaxial dielectric resonator
726
Erratum: Radiation characteristics of waveguide-excited dielectric spheres with matched sphere-air boundary
727
Erratum: Radiation from ring sources of electric or magnetic dipoles with different orientations in free space
728
Erratum: Radiation from ring sources of electric or magnetic dipoles with different orientations in free space
729
Erratum: Radiation patterns of circular apertures with structural shadows
730
Erratum: Radiation patterns of paraboloid with log-periodic dipole feed
731
Erratum: Rainfall crosspolarisation at microwave frequencies
732
Erratum: Raised trigonometric and hyperbolic power lines
733
Erratum: RC active allpass sections
734
Erratum: RCS diagram records processing in Cheby¿shev space
735
Erratum: Reactive-power definitions and power-factor improvement in nonlinear systems
736
Erratum: Realisation of a lossless transistor gyrator
737
Erratum: Realisation of irrational immitances containing a square root
738
Erratum: Reappraisal of computer-corrected network analyser design and calibration
739
Erratum: Reappraisal of computer-corrected network analyser design and calibration
740
Erratum: Recent measurements of compact electronically tunable liquid crystal phase shifter in rectangular waveguide topology
741
Erratum: Rectangular-ridge vibrational modes
742
Erratum: Rectification at n-n GaAs:(Ga,Al)As heterojunctions
743
Erratum: Rectifier action with constant load voltage: infinite-capacitance condition
744
Erratum: Reduction of FM noise in impatt oscillators by optical illumination
745
Erratum: Reduction of network sensitivity through the use of high-order approximating functions
746
Erratum: Regions of transient stability for power systems involving saliency using the Popov criterion
747
Erratum: Relation between pre-exponential factor and activation energy in dark conductivity of polyethylene
748
Erratum: Relationship between Box-Jenkins-?str?m control and Kalman linear regulator
749
Erratum: Relationship between modal matrix and state transformation matrices for 2-element-kind networks
750
Erratum: Relevance of complex normalisation in precision reflectometry
751
Erratum: Reliability parameters of equipment with a general repair-time distribution
752
Erratum: Remarks on "The relation which should subsist between a current of electricity and the conductor employed to convey it"
753
Erratum: Remote control of traction power over two wires
754
Erratum: Reply to Comment on `Fundamental mode spot-size measurement in single-mode optical fibres¿
755
Erratum: Representaion of magnetic characteristic, including hysteresis, by exponential series
756
Erratum: Representation and simulation of AC/DC convertor systems using fixed and varying electrical axes
757
Erratum: Research, development and decline: Britian´s industrial enigma
758
Erratum: Resin-bounded glass-fibre outdoor h.v. insulators
759
Erratum: Resistance of large earth-electrode systems
760
Erratum: Resistance of Ti:LiNbO3 devices to ionising radiation
761
Erratum: Response of an a.m. receiver to a quasisynchronous multi-a.m.-transmitter filed
762
Erratum: Reversible regenerative armatures and short-air-space dynamos
763
Erratum: Review of high-voltage gas breakdown and insulators in compressed gases
764
Erratum: Review of trends in excitation systems and possible future developments
765
Erratum: Review of trends of large hydroelectric generating equipment
766
Erratum: Revolving-field analysis of asymmetric three-phase machines and its extension to single- and two-phase machines
767
Erratum: RF power injected into the DC yard by an HVDC convertor pole
768
Erratum: Ring-laser accuracy
769
Erratum: Role of phosphate coating in determining the magnetic properties of Goss-oriented silicon iron
770
Erratum: Safety of household electrical appliances
771
Erratum: Sampled multiserver queues with general arrivals and deterministic service time
772
Erratum: Scalar control: an alternative AC drive philosophy
773
Erratum: Scale-model linear induction motors with solid iron secondaries
774
Erratum: Scattering loss of s.a.w. resonators
775
Erratum: Scattering parameters of an arbitrarily shaped aperture in a waveguide
776
Erratum: Search procedure for efficient superdirective array and image enhancement functions
777
Erratum: Second derviative Gauss-Newton-based method for solving nonlinear simultaneous equations
778
Erratum: Second generation teletext and viewdata decoders
779
Erratum: Second-order recursive digital-filter element for poles near the unit circle and the real z axis
780
Erratum: Selection of p.v.c.-insulated cables for 415 V motors in CEGB power stations
781
Erratum: Self-excitation of dual-excited synchronous machines
782
Erratum: Self-excited induction generator/force-commutated rectifier system operating as a DC power supply
783
Erratum: Self-locating elliptically cored fibre with an accessible guiding region
784
Erratum: Self-regulating Picard-type iteration for computing the periodic response of a nearly linear circuit to a periodic input
785
Erratum: Self-tuned filters
786
Erratum: Semiconductor junction transceiver for fibre optic communication
787
Erratum: Sensitivity analysis in computer-aided design of linear circuits
788
Erratum: Sensitivity analysis of d.w.r. synchronous generator
789
Erratum: Sensitivity to geometrical parameters in a dispersion-free multicomponent fibre
790
Erratum: Separation of matrix eigenvalues and structural decomposition of large-scale systems
791
Erratum: Shared memories in the CYBA-M multiprocessor
792
Erratum: Shock waves in a nonlinear delay line
793
Erratum: Short-circuit electromagnetic forces in three-phase gas insulated systems with aluminium enclosure
794
Erratum: Shorter notices: Electrical Contracting and Estimating
795
Erratum: Signal-error-feedforward-controlled amplifiers
796
Erratum: Signal-to-noise performance of the pulse-interval and width-modulation system
797
Erratum: Simple analysis of anisotropic microstrip lines by a transform method
798
Erratum: Simple and accurate loss measurement technique for semiconductor optical waveguides
799
Erratum: Simple low-cost correlator and multiplier circuits
800
Erratum: Simple method of closed-loop system-matrix assignment
801
Erratum: Simple models for high-frequency MESFETS and comparison with experimental results
802
Erratum: Simple negative-impedance convertor
803
Erratum: Simple notch filter using a negative-impedance convertor
804
Erratum: Simple sufficient test for stability of 2-dimensional recursive digital filters
805
Erratum: Simple technique for displaying periodically jittered binary waveforms
806
Erratum: Simple TRAPATT circuit for 2nd-harmonic extraction
807
Erratum: Simplified analytic stability test for systems with commensurate time delays
808
Erratum: Simplified linearly polarised contoured beam reflector antenna for a European coverage requirement
809
Erratum: Simplified method for synthesising m.q.f. filters
810
Erratum: Simplified procedure for the design of multisection Chebyshev quarterwave transformers
811
Erratum: Simplified quadrature network
812
Erratum: Simplified topological solutions of networks containing nullators and norators
813
Erratum: Simulated inductors using differential amplifiers
814
Erratum: Simulation of a generalised self-tuning regulator
815
Erratum: Simulation of the near field of single-mode fibres by means of a microwave model
816
Erratum: Simultaneous 20 and 30 GHz attenuation measurements on a satellite-Earth path
817
Erratum: Simultaneous phase and amplitude measurements on optical signals using a multiport junction
818
Erratum: Single-fault diagnosis of nonlinear resistive networks
819
Erratum: Single-mode c.w. ridge-waveguide laser emitting at 1.55 ¿m
820
Erratum: Single-mode fibre connectors
821
Erratum: Site shielding for Earth-station antennas
822
Erratum: Slant-path microwave radio propagation through distorted raindrops
823
Erratum: Slowly varying discrete system xi+1=Aixi
824
Erratum: Small-hole couplers
825
Erratum: Small-signal equivalent π networks for carrier generation--recombination--trapping at imperfection centres in semiconductors
826
Erratum: Solution of a singular integral equation over a multiple interval and applications to multiple strips, grids and waveguide diaphragms
827
Erratum: Solution of a singular integral equation over a multiple interval and applications to multiple strips, grids and waveguide diaphragms
828
Erratum: Some Boolean matrix operators
829
Erratum: Some electromagnetic problems
830
Erratum: Some new solutions to ferro-resonance problem in power system
831
Erratum: Some proposals for improved forms of precision fast digital-analogue and analogue-digital convertors
832
Erratum: Some recent books: Electromagnetic Circuit Analysis. Vol. 2ߝActive Networks
833
Erratum: Some results for an r.f.- and p.l.-modulated incoherent carrier
834
Erratum: Sources of image degradation in fundamental and harmonic ultrasound imaging: a nonlinear, full-wave, simulation study [Apr 11 754-765]
835
Erratum: Spectral analysis and the interference EMG
836
Erratum: Spectral response of a point-contact diode in the submillimetre range
837
Erratum: Speed-power property of GaAs Schottky-barrier coupled Schottky-barrier gate FET logic
838
Erratum: Spontaneous Brillouin scattering for single-mode optical-fibre characterisation
839
Erratum: Spreading resistance of multiple-layer cylindrical structures
840
Erratum: Stabilisation of 2-D digital filters via Hilbert transform
841
Erratum: Stability criterion for p.w.m. feedback systems containing one integrating element
842
Erratum: Stability of feedback systems containing a single monotonic nonlinearity
843
Erratum: Stability of rectifiers with voltage-controlled oscillator firing systems
844
Erratum: Stability properties of some gyrator circuits
845
Erratum: State-space description of a multirate digital filter
846
Erratum: Stationary phase method for far-field computation of defocused reflector antennas
847
Erratum: Statistical approach for interpretation of power transformers frequency response analysis results
848
Erratum: Statistical measurements today
849
Erratum: Statistical model for the prediction of the bandwidth of an optical route
850
Erratum: Statistical nature of the multiplication process
851
Erratum: Statistics of tropospheric attenuation at 19 GHz from observations of solar noise
852
Erratum: Steady-state oscillation and stabilisation of variable-frequency invertor-fed inductionmotor drives
853
Erratum: Steady-state stability of variable-frequency synchronous machine drives
854
Erratum: Stochastic model for pulsed radio transmission through stratified forests
855
Erratum: Stray-free switched-capacitor building block that realises delay, constant multiplier, or summer circuit
856
Erratum: Stray-insensitive differential input stages for A/D convertors
857
Erratum: Strays-insensitive switched capacitor biquads with reduced number of capacitors
858
Erratum: Strength of fusion splices for fibre lightguides
859
Erratum: Subharmonic resonance in stepping motors
860
Erratum: Subscriber loop noise measurements and calibration
861
Erratum: Substitute materials in time of war
862
Erratum: Suggested definition of reactive power for nonsinusoidal systems
863
Erratum: Suggestion for an i.c. fast parallel multiplier
864
Erratum: Summed-sensitivity invariants and their generation
865
Erratum: Sun as a broadband source for tropospheric atttenuation measurements at millimetre wavelengths
866
Erratum: Sur deux méthodes de mesure de la résistance de base (Analysis of two base-resistance measuring methods)
867
Erratum: Surface field reduction for planar semiconductor devices using oxygen doped amorphous silicon
868
Erratum: Surface-acoustic-wave parametric amplifier
869
Erratum: Survey of measurements of attenuation by rain and other hydrometeors
870
Erratum: Switched-capacitor building blocks for analogue signal processing
871
Erratum: Switching circuits for yield-enhancement of an array chip
872
Erratum: Switching mechanism in chalcogenide glasses
873
Erratum: Symmetrical and asymmetrical stable modes in systems for electronic stator control of asynchronous machines by semiconductor switches
874
Erratum: Synthesis of non-series-parallel LC oneport networks
875
Erratum: Synthesis of threshold-logic networks using Karnaugh-mapping techniques
876
Erratum: Synthesis procedure for, and characteristics of, one-port linear magnetoelastic dispersors
877
Erratum: Synthetic testing: the present state
878
Erratum: Tables of integrals: misprint in a convolution-type integral with Gauss-Laguerre functions
879
Erratum: Taylor series approach to functional approximation for inversion of Laplace transforms
880
Erratum: Taylor series approach to functional approximation for inversion of Laplace transforms
881
Erratum: Technical publications
882
Erratum: Technique for increasing the gain-bandwidth product of n-m.o.s. and p-m.o.s. integrated inverters
883
Erratum: Technique for plotting nonequilibrium C/V curves of an m.o.s. capacitor
884
Erratum: Technique for triple-transit suppression in surface-acoustic-wave delay lines
885
Erratum: Telecommunication systems in relation to 50 Hz a.c. electric traction
886
Erratum: Temperature dependence of impact ionisation rates in GaAs between 20° and 200°C
887
Erratum: Terminal behaviour of the uncontrolled R-L fed 3-phase bridge rectifier
888
Erratum: Terrain modelling of glideslope for instrument landing system
889
Erratum: Test point selection methods for self-testing based analogue fault diagnosis system
890
Erratum: Testing for numerical computations
891
Erratum: The application of various steels
892
Erratum: The distribution of power by alternate current motors
893
Erratum: The Electrical Congresses of Paris
894
Erratum: The eyes of the oil industry
895
Erratum: The ferroresonant line conditioner
896
Erratum: The London-Birmingham television radio-relay link
897
Erratum: The Mad Matrician strikes again
898
Erratum: The theory of alternating currents, particularly in reference to two alternate-current machines connected to the same circuit
899
Erratum: The transient response of r.f. and i.f. filters to a wave packet
900
Erratum: The work of the Radio Research Station
901
Erratum: Theorems on power, means, and RMS values of uniformly sampled periodic signals
902
Erratum: Theoretical analysis of hybrid modes in a dual-depth corrugated waveguide feed
903
Erratum: Theoretical and experimental results of guided wavelength of a slot on a low-permittivity substrate
904
Erratum: Theoretical characteristics of a two-terminal negative dynamic resistance
905
Erratum: Theoretical comparison of crosspolar performance of dielectric and corrugated feeds
906
Erratum: Theoretical investigation of a stripline planar antenna
907
Erratum: Theoretical modelling of the storage energy envelope of high frequency AC reactive components to predict chaos boundary
908
Erratum: Theory for heterodyne optical ASK receivers using square-law detection and postdetection filtering
909
Erratum: Theory of cylindrical antennas with arbitrary impedance loading
910
Erratum: Theory of FM noise of single-mode injection lasers
911
Erratum: Thermal insulation for energy storage
912
Erratum: Thermally accelerated degradation of 1.3 ¿m BH lasers
913
Erratum: Thermoelectric power generation
914
Erratum: Three-level transferred-electron effects in InP
915
Erratum: Three-terminal GaAs light emitter-modulator device
916
Erratum: Time jitter in self-timed regenerative repeaters with correlated transmitted symbols
917
Erratum: Time-dependent thermal effects in current-modulated semiconductor lasers
918
Erratum: Time-partition method for dynamic simulation of control systems with transport delays
919
Erratum: Timing-jitter growth in a chain of regenerative repeaters for optical-fibre transmissions
920
Erratum: Topological formulas for 4-terminal nonreciprocal constraints
921
Erratum: Total dispersion in step-index monomode fibres
922
Erratum: Tractable form of the dyadic Green function for application to multilayered isotropic media
923
Erratum: Transferred-electron harmonic generators for millimetre band sources
924
Erratum: Transferred-electron negative-resistance amplifier
925
Erratum: Transient analysis using quasiperiodic forcing functions
926
Erratum: Transient performance of reluctance machines
927
Erratum: Transient stability enhancement of a gridconnected wind farm using an adaptive neurofuzzy controlled-flywheel energy storage system
928
Erratum: Transient voltages generated by inductive switching in control circuits
929
Erratum: Transistors, Principles, Design and Applications
930
Erratum: Translinear circuits: a proposed classification
931
Erratum: Transmission of a stabilised RF phase reference over a monomode fibre-optic link
932
Erratum: Transmission parameters of a class of coupled distributed networks
933
Erratum: Transmission-line matrix analysis of continuous waveguiding Structures using Stepped-impedance cavities
934
Erratum: Transverse current on strip dipole antenna
935
Erratum: Treatment of constraint equations in nodal analysis
936
Erratum: Tunable Y-type waveguide power divider as standard mismatch
937
Erratum: Turn-on delay for Josephson logic devices with high damping
938
Erratum: Twisted nematic liquid-crystal electro-optic devices with areas of reverse twist
939
Erratum: Two-channel direct-bit detection receiver for 16-PSK modulated signals
940
Erratum: Two-dimensional analysis of tapered distributed networks using finite elements
941
Erratum: Two-dimensional discrete filters using spatial integrators
942
Erratum: Two-diode parametric amplifiers
943
Erratum: Ultra low resistance ohmic contacts to n-GaAs
944
Erratum: Ultra wide bandwidth v.a.d. fibre
945
Erratum: Unified active structure for an arbitrary 2-port network realisation
946
Erratum: Unified approach to electronic, magnetic and dielectric nonparametric amplifying devices
947
Erratum: Unified user-oriented computation of shielded, covered and open planar microwave and millimeter-wave transmission-line characteristics
948
Erratum: Upper bound for signal/noise ratio for instantaneously companded delta-modulation systems
949
Erratum: Use of frequency-scan techniques for subsynchronous-resonance analysis of a practical, seriescapacitor compensated AC network
950
Erratum: Use of impatt diodes as fast avalanche photodetectors
951
Erratum: Use of inverse Karnaugh maps in realisation of logic functions
952
Erratum: Use of tests at elevated temperatures to accelerate the life of an m.o.s. integrated circuit
953
Erratum: Variable-frame-rate coding scheme for speech-analysis/synthesis systems
954
Erratum: Variable-gradient method for adaptive equaliser
955
Erratum: Variable-speed switched reluctance motors
956
Erratum: Variation of minority carrier lifetime with level of injection in p-n-junction devices
957
Erratum: VLSI implementation of a 5-trit full adder
958
Erratum: Voltage amplification in switched-capacitor networks
959
Erratum: Voltage-fed operation of linear induction motors under conditions of supply unbalance
960
Erratum: Wave interaction with moving boundaries
961
Erratum: Wavelength dependence of optical oxidation of silicon
962
Erratum: Wheatstone´s contribution to electrical engineering
963
Erratum: Wideband GaAs Gunn reflection amplification for the 18--26.5 GHz waveguide band
964
Erratum: Wide-range directional LDV employing modulated semiconductor laser source
965
Erratum: Widerange variable-pulse generator
966
Erratum: Will nuclear power pay off?
967
Erratum: Wind energy. A design idea for a small vertical-axis turbine
968
Erratum: Window functions for nonrecursive digital filters
969
Erratum: Zenithal attenuation due to molecular oxygen and water vapour, in the frequency range 3-350 GHz
970
Erratum: Zero temperature coefficients in overtone lithium-tantalate thickness-mode resonators
971
Erratum: Zero-steering antenna system for receiving a signal close to the direction of strong interference
972
Erratum: Zinc-air batteries for electric propulsion
973
Erroneous data detection in the harmonic state estimation of a radial distribution system with distributed generation
974
Erroneous execution and recovery in microprocessor systems
975
Erroneous Mpeg Packet Synchronization In Fec Decoder Of The Mcns/scte/ltu-t J.83 Annex B Standard
976
Erroneous MPEG packet synchronization in the MCNS/SCTE/ITU-T J.83 Annex B standard
977
Erroneous practices in measuring discontinuous disturbances
978
Erroneous requirements: a linguistic basis for their occurrence and an approach to their reduction
979
Erroneous Results from SPICE Simulations of Switching Converters: A Dynamical System Viewpoint
980
Erroneous signal detection and secure distance improvement in two way Quantum Key Distribution protocol with decoy state
981
Erroneous state detection in piecewise FIFO system
982
Error
983
Error accumulation effects for the a posteriori RLSL prediction filter
984
Error accumulation in multiple cycles of still image compression and color transformations
985
Error accumulation of repetitive image coding
986
Error activity and error entropy as a measure of psychoacoustic significance in the perceptual domain
987
Error Adaptive Classifier Boosting (EACB): Leveraging Data-Driven Training Towards Hardware Resilience for Signal Inference
988
Error Adaptive Control Computer for Interconnected Power Systems
989
Error adaptive tracking for mobile robots
990
Error Allowing Minimax: Getting over Indifference
991
Error Amplification and Disturbance Propagation in Vehicle Strings with Decentralized Linear Control
992
Error amplification improves performance by reducing motor noise
993
Error amplification to promote motor learning and motivation in therapy robotics
994
Error Amplifier Design of Peak Current Controlled (PCC) Buck LED Driver
995
Error amplifier for PWM controller
996
Error amplifier limitations in low voltage regulators using only NPN transistors
997
Error analyses and modeling for CEBAF beam optical systems: beam line element specifications and alignment error tolerances
998
Error Analyses for a Gravity Gradiometer Mission
999
Error analyses for photoelastic multimode optical fiber sensors
1000
Error analyses of a 3-phase electricity meter with class-0.5 accuracy
بازگشت