<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Preparation of polypyrrole films containing ferrocyanide ions deposited onto thermally pre-treated and untreated iron substrate: Application in the electroanalytical determination of ascorbic acid
2
Preparation of polypyrrole microstructures by direct electrochemical oxidation of pyrrole in an aqueous solution of camphorsulfonic acid
3
Preparation of polypyrrole/sulfonated-poly(2,6-dimethyl-1,4-phenylene oxide) conducting composites and their electrical properties
4
Preparation of polypyrrole-coated magnetic particles for micro solid-phase extraction of phthalates in water by gas chromatography–mass spectrometry analysis
5
Preparation of polypyrrole-coated silicon nanoparticles
6
Preparation of polysaccharide derivates chitosan-graft-poly(ɛ-caprolactone) amphiphilic copolymer micelles for 5-fluorouracil drug delivery
7
Preparation of polysaccharide supramolecular films by vine-twining polymerization approach
8
Preparation of polysaccharides from Acanthopanax senticosus and its inhibition against irradiation-induced injury of rat
9
Preparation of polysaccharides from cyanobacteria Nostoc commune and their antioxidant activities
10
Preparation of polysiloxane/perfluorosulfonic acid nanocomposite membranes in supercritical carbon dioxide system for direct methanol fuel cell
11
Preparation of polysilsesquioxane grafted thermoresponsive polymer by use of mercapto group
12
Preparation of polysilsesquioxane having dimethylamino group and grafted thermoresponsive polymer
13
Preparation of polysilsesquioxane-urethaneacrylate copolymer film reinforced with chitin nanofibers
14
Preparation of polystyrene brush film by radical chain-transfer polymerization and micromechanical properties
15
Preparation of polystyrene colloid particles armored by clay platelets via dispersion polymerization
16
Preparation of polystyrene grafted silica nanoparticles by two-steps UV induced reaction
17
Preparation of polystyrene latex particles by miniemulsion polymerization using a predissolved fluorinated block copolymer as the sole co-stabilizer
18
Preparation of polystyrene latex particles from radiation induced miniemulsion polymerization using Y-like branched emulsifiers as the sole stabilizer
19
Preparation of polystyrene particles with narrow particle size distribution by γ-ray initiated miniemulsion polymerization stabilized by polymeric surfactant
20
Preparation of Polystyrene submicron particles using ASES process in supercritical carbon dioxide
21
Preparation of polystyrene/graphite nanosheet composite
22
Preparation of polystyrene/montmorillonite nanocomposites using a new radical initiator-montmorillonite hybrid via in situ intercalative polymerization
23
Preparation of polystyrene/montmorillonite nanocomposites: optimization by response surface methodology (RSM)
24
Preparation of polystyrene/poly(methyl methacrylate) blends by compressed fluid antisolvent technique
25
Preparation of polystyrene/polyaniline blends by in situ polymerization technique and their morphology and electrical property
26
Preparation of polystyrene/SiO2 microsphere via Pickering emulsion polymerization: Synergistic effect of SiO2 concentrations and initiator sorts
27
Preparation of polystyrene/zirconia core-shell microspheres and zirconia hollow shells
28
Preparation of polystyrene-based activated carbon spheres and their adsorption of dibenzothiophene
29
Preparation of polystyrene-based activated carbon spheres and their adsorption of dibenzothiophene
30
Preparation of polystyrene-based activated carbon spheres with high surface area and their adsorption to dibenzothiophene
31
Preparation of polystyrene-grafted poly(vinylidene fluoride) membranes for lithium secondary batteries
32
Preparation of polystyrene–multiwalled carbon nanotube composites with individual-dispersed nanotubes and strong interfacial adhesion
33
Preparation of Polystyrene-Supported (alpha)-Seleno Acetate and Application to Solid-Phase Synthesis of (beta)-Keto Esters
34
Preparation of polystyrene-supported Lewis acidic Fe(III) ionic liquid and its application in catalytic conversion of carbon dioxide
35
Preparation of polystyrene-supported soluble palladacycle catalyst for Heck and Suzuki reactions
36
Preparation of polysulfone membranes via vapor-induced phase separation and simulation of direct-contact membrane distillation by measuring hydrophobic layer thickness Original Research Article
37
Preparation of polysulfone nanofiltration membranes by UV-assisted grafting polymerization for water softening Original Research Article
38
PREPARATION OF POLYSULFONE NANO-STRUCTURED MEMBRANE FOR SULPHATE IONS REMOVAL FROM WATER
39
Preparation of polysulfone–Fe3O4 composite ultrafiltration membrane and its behavior in magnetic field
40
Preparation of polysulfone–polyamide thin film composite hollow fiber nanofiltration membranes and their performance in the treatment of aqueous dye solutions Original Research Article
41
Preparation of polytetrafluoroethylene porous membrane based composite alkaline exchange membrane with improved tensile strength and its fuel cell test
42
Preparation of polythiophene LB films and their gas sensitivities by the quartz crystal microbalance
43
Preparation of polyurea capsules using electrocapillary emulsification
44
Preparation of polyurea microcapsules containing ovalbumin
45
Preparation of polyurea microcapsules with different composition ratios: structures and thermal properties
46
Preparation of polyurea microcapsules with different composition ratios: structures and thermal properties
47
Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation
48
Preparation of polyvinyl alcohol–silica hybrid heterogeneous anion-exchange membranes by sol–gel method and their characterization
49
Preparation of Polyvinylchloride Nanofiltration Membrane: Investigation of the Effect of Thickness, Prior Evaporation Time and Addition of Polyethylenglchol as Additive on Membrane Performance and Properties
50
Preparation of polyvinylidene fluoride hollow fiber membranes for CO2 absorption using phase-inversion promoter additives
51
Preparation of polyvinylpyrrolidone-protected Prussian blue nanocomposites in microemulsion
52
Preparation of polyynes by laser ablation of graphite in aqueous media
53
Preparation of polyynes by liquid-phase laser ablation using different irradiation target materials and solvents Original Research Article
54
Preparation of polyynes up to C22H2 by liquid-phase laser ablation and their immobilization into SiO2 gel Original Research Article
55
Preparation of Pooled Arabidopsis YAC DNAs for PCR-Based Mapping
56
Preparation of porcelain tiles from Egyptian raw materials
57
Preparation of pore expanded mesoporous hydroxyapatite via auxiliary solubilizing template method
58
Preparation of pore size controllable macroporous polymer beads
59
Preparation of pore-filled responsive membranes using dextran precipitation
60
Preparation of porous (Ba,Sr)TiO3 by adding corn-starch Original Research Article
61
Preparation of porous Al2TiO5 ceramics reinforced by in situ formation of mullite whiskers
62
Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction
63
Preparation of porous alumina–carbon nanotube composites via direct growth of carbon nanotubes
64
Preparation of porous aluminium oxide (Al2O3) hollow fibre membranes by a combined phase-inversion and sintering method
65
PREPARATION OF POROUS and DENSE BULK SAMPLES IN CALCIUM MAGNESIUM SILICATE SYSTEMS USING STEEL SLAG and DIFFERENT ADDITIVE BY CONVENTIONAL SINTERING METHOD (TECHNICAL NOTE)
66
Preparation of porous and hollow Mn2O3 microspheres and their adsorption studies on heavy metal ions from aqueous solutions
67
Preparation of porous bioactive ceramic microspheres and in vitro osteoblastic culturing for tissue engineering application
68
Preparation of porous CaCO3/PAM composites by CO2 in water emulsion templating method
69
Preparation of porous carbon derived from mixtures of furfuryl resin and glycol with controlled pore size distribution Original Research Article
70
Preparation of porous carbon films by the pyrolysis of poly(urethane-imide) films and their pore characteristics Original Research Article
71
Preparation of porous carbon nanofibers derived from graphene oxide/polyacrylonitrile composites as electrochemical electrode materials
72
Preparation of porous carbon spheres from porous starch
73
Preparation of porous carbon-doped TiO2 film by sol–gel method and its application for the removal of gaseous toluene in the optical fiber reactor
74
Preparation of porous carbons by chemical activation of polyethyleneterephthalate
75
Preparation of porous carbons from cypress using super-heated steam. I. The carbonization furnace and its characteristics
76
Preparation of porous carbons from cypress using super-heated steam. II. Pore structure of carbonized products
77
Preparation of porous carbons from cypress using super-heated steam: III. Performance in electric double layer capacitors
78
Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation
79
Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation
80
Preparation of porous carbons from petroleum coke by different activation methods
81
Preparation of porous carbons from phenol–formaldehyde resins with chemical and physical activation Original Research Article
82
Preparation of porous carbons from thermoplastic precursors and their performance for electric double layer capacitors Original Research Article
83
Preparation of porous carbon–silica composite monoliths
84
Preparation of porous ceramics with controllable pore sizes in an easy and low-cost way
85
Preparation of porous ceria doped tetragonal zirconia ceramics by capsule free hot isostatic pressing
86
Preparation of porous ceria doped tetragonal zirconia ceramics by capsule free hot isostatic pressing
87
Preparation of porous chitosan/GPTMS hybrid membrane and its application in affinity sorption for tyrosinase purification with Agaricus bisporus
88
Preparation of Porous Chromia-Pillared Molybdenum Trioxide
89
Preparation of porous cobalt and nickel oxides from corresponding alkoxides using a sonochemical technique and its application as a catalyst in the oxidation of hydrocarbons
90
Preparation of porous cobalt and nickel oxides from corresponding alkoxides using a sonochemical technique and its application as a catalyst in the oxidation of hydrocarbons
91
Preparation of porous composite implant materials by in situ polymerization of porous apatite containing -caprolactone or methyl methacrylate
92
Preparation of porous Cu2O octahedron and its application as L-Tyrosine sensors
93
Preparation of porous flower-shaped SnO2 nanostructures and their gas-sensing property
94
Preparation of porous glass-ceramics under different hydrothermal hot pressing conditions
95
Preparation of porous glasses from phosphorus slag
96
Preparation of porous graphene using cuprous oxide microspheres as sacrificial templates for enriching proteins and peptides
97
Preparation of porous hydroxyapatite ceramics containing mullite by reaction sintering of clay, alumina and hydroxyapatite
98
Preparation of porous hydroxyapatite scaffolds
99
Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods
100
Preparation of porous ion-exchange membranes (IEMs) and their characterizations
101
Preparation of porous lanthanum phosphate with templates
102
Preparation of porous magnetic nanocomposites using corncob powders as template and their applications for electromagnetic wave absorption
103
Preparation of porous material from talc by mechanochemical treatment and subsequent leaching
104
Preparation of porous material from waste bottle glass by hydrothermal treatment
105
Preparation of porous materials with controlled pore size and porosity
106
Preparation of porous materials with ordered hole structure
107
Preparation of porous membrane by combined use of thermally induced phase separation and immersion precipitation
108
Preparation of porous membranes with the residues obtained by the extraction of coal
109
Preparation of porous microsphere-scaffolds by electrohydrodynamic forming and thermally induced phase separation
110
Preparation of porous monolayer film by immersing the stearic acid Langmuir–Blodgett monolayer on mica in salt solution
111
Preparation of porous nanorod polyaniline film and its high electrochemical capacitance performance
112
Preparation of porous nitrogen-doped titanium dioxide microspheres and a study of their photocatalytic, antibacterial and electrochemical activities
113
Preparation of porous paper composites with ruthenium hydroxide and catalytic alcohol oxidation in a multiphase gas–liquid–solid reaction
114
Preparation of porous particles by liquid–liquid interfacial crystallization
115
Preparation of porous PLGA/HA/collagen scaffolds with supercritical CO2 and application in osteoblast cell culture
116
Preparation of porous PMMA/Na+–montmorillonite cation-exchange membranes for cationic dye adsorption
117
Preparation of porous poly(ɛ-caprolactone) scaffolds by gas foaming process and in vitro/in vivo degradation behavior using γ-ray irradiation
118
Preparation of porous polymer membranes using nano- or micro-pillar arrays as templates
119
Preparation of porous polymer monolithic column incorporated with graphene nanosheets for solid phase microextraction and enrichment of glucocorticoids
120
Preparation of porous polymer monoliths featuring enhanced surface coverage with gold nanoparticles
121
Preparation of porous polymer samples for SEM: combination of photo oxidation degradation with a freeze fracture technique
122
Preparation of porous PVDF hollow fibre membrane via a phase inversion method using lithium perchlorate (LiClO4) as an additive
123
Preparation of porous PVDF-NiB capsules as catalytic adsorbents for hydrogen generation from sodium borohydride
124
Preparation of porous ruthenium catalysts utilizing a silsesquioxane ligand; catalytic activity towards hydroformylation of 1-octene Original Research Article
125
Preparation of porous scaffold from hydroxyapatite powders
126
Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods
127
Preparation of porous sheet composite impregnated with TiO2 photocatalyst by a papermaking technique
128
Preparation of Porous Si (100) for Overgrown Cubic Layer: Morphological Investigation
129
Preparation of porous SiC ceramic with a woodlike microstructure by sol-gel and carbothermal reduction processing
130
Preparation of porous SiC ceramics from waste cotton linter by reactive liquid Si infiltration technique
131
Preparation of porous Si-incorporated hydroxyapatite
132
Preparation of porous silica from chlorite by selective acid leaching
133
Preparation of porous silica from vermiculite by selective leaching
134
Preparation of porous SnO2 helical nanotubes and SnO2 sheets
135
Preparation of Porous SnO2 Particles Having High Specific Surface Area and High Thermal Stability via an Aqueous Solution Route and Subsequent Hydrothermal Treatment
136
Preparation of porous spherical CuI nanoparticles
137
Preparation of porous stainless steel hollow fibers by robotic fiber deposition
138
Preparation of porous starch and its use as a structure-directing agent for production of porous zinc oxide
139
Preparation of porous structure LiFePO4/C composite by template method for lithium-ion batteries
140
Preparation of porous styrenics-based monolithic layers for thin layer chromatography coupled with matrix-assisted laser-desorption/ionization time-of-flight mass spectrometric detection
141
Preparation of porous super-hydrophobic and super-oleophilic polyvinyl chloride surface with corrosion resistance property
142
Preparation of porous tin dioxide powder by ultrasonic spray pyrolysis and their application to sensor materials
143
Preparation of Porous TiO2 Cryogel Fibers through Unidirectional Freezing of Hydrogel Followed by Freeze-Drying
144
Preparation of porous TiO2/silica composites without any surfactants
145
Preparation of porous TiO2/Ti composite membrane for immunoisolation
146
Preparation of porous titania thin film and its photocatalytic activity
147
Preparation of porous titanium oxide films onto indium tin oxide for application in organic photovoltaic devices
148
Preparation of porous titanium phosphate glass-ceramics for NH3 gas adsorption with self-cleaning ability
149
Preparation of porous Y2SiO5 ceramics with relatively high compressive strength and ultra-low thermal conductivity by a TBA-based gel-casting method
150
Preparation of porous zirconia microspheres by internal gelation method
151
Preparation of porous, chemically cross-linked, PVdF-based gel polymer electrolytes for rechargeable lithium batteries
152
Preparation of porous, nano-sized urea–formaldehyde polymer powder
153
Preparation of porphyrinated polyacrylonitrile fiber mat supported TiO2 photocatalyst and its photocatalytic activities
154
Preparation of Portland cement with sugar filter mud as lime-based raw material
155
Preparation of positive LiCoO2 films by electron cyclotron resonance (ECR) plasma sputtering method and its application to all-solid-state thin-film lithium batteries
156
Preparation of POSS-based organic–inorganic hybrid mesoporous materials networks through Schiff base chemistry
157
Preparation of POSS-poly(ɛ-caprolactone)-β-cyclodextrin/Fe3O4 hybrid magnetic micelles for removal of bisphenol A from water
158
Preparation of potassium acetate intercalated metakaolinite
159
Preparation of potassium lithium niobate powders with low Li content via the Pechini method
160
Preparation of potassium tantalate niobate thin films by chemical solution deposition and their characterization
161
Preparation of potassium tantalate thin films through chemical solution deposition
162
Preparation of potential 3-deazauridine and 6-azauridine prodrugs through an enzymatic alcoholysis
163
Preparation of potential inhibitors of the mur-Pathway enzymes on solid support using an acetal linker
164
Preparation of potentially piezoelectric polymers containing multicyano functionalities and their properties
165
Preparation of PP-g-PA6 copolymers through reactive blending
166
Preparation of PPO-silica mixed matrix membranes by in-situ sol–gel method for H2/CO2 separation
167
Preparation of Pr0.35Nd0.35Sr0.3MnO3−δ/YSZ composite cathode powders for tubular solid oxide fuel cells by microwave-induced monomer gelation and gel combustion synthesis process
168
Preparation of preferred oriented LiCoO2 thin films by soft solution processing
169
Preparation of Preproinsulin Gene Construct Containing the Metallothionein2A (pBINDMTChIns) and Its Expression in NIH3T3 Cell Line and Muscle Tissue of Alloxan Diabetic Rabbits
170
Preparation of pressure-sensitive adhesives for the production of sticky foam at ambient temperature
171
Preparation of primary arylamines via arylzinc chlorides in good yields
172
PREPARATION OF PRINCIPAL FOR SCHOOL CHANGE: A COMPARATIVE STUDY BETWEEN NEPAL AND SINGAPORE
173
Preparation of processible polyaniline-formate salt via emulsifier free inverted emulsion polymerization and its antistatic applications
174
Preparation of products rich in resistant starch from maize starch by an enzymatic method
175
Preparation of products rich in slowly digestible starch (SDS) from rice starch by a dual-retrogradation treatment
176
Preparation of promoted nickel catalysts supported on mesoporous nanocrystalline gamma alumina for carbon dioxide methanation reaction
177
Preparation of Proper Culture Medium for Saccharomyces cerevisiae var. boulardii with Molasses and Animal Serum
178
Preparation of Proper Culture Medium for Saccharomyces cerevisiae var. boulardii with Molasses and Animal Serum
179
Preparation of Proper Immunogen by Cloning and Stable Expression of cDNA coding for Human Hematopoietic Stem Cell Marker CD34 in NIH-3T3 Mouse Fibroblast Cell Line
180
Preparation of prostate specific antigen standards for immunoradiometric assay
181
Preparation of Protected Nanoparticles of Bismuth Telluride by Laser Ablation in Solution
182
Preparation of protein loaded chitosan microparticles by combined precipitation and spherical agglomeration
183
Preparation of protein-adsorption-resistant polyethersulfone ultrafiltration membranes through surface segregation of amphiphilic comb copolymer
184
Preparation of protein-loaded PLGA-PVP blend nanoparticles by nanoprecipitation method: entrapment, Initial burst and drug release kinetic studies
185
Preparation of protein-loaded sustained-release microspheres via ‘solid-in-oil-in-hydrophilic oil-in-ethanol (S/O/hO/E)’ emulsification
186
Preparation of protein-loaded-PLGA microspheres by an emulsion/solvent evaporation process employing LTCC micromixers
187
Preparation of Proteolytic Enzymes from Kamchatka Crab Paralithodes camchatica Hepatopancreas and Their Application
188
Preparation of proton conducting BaCe0.8Gd0.2O3 thin films
189
Preparation of proton conducting composites by mechanical milling for phosphorus-containing solid acids
190
Preparation of proton conducting ionic glasses in the systems CsHSO4–MHSO4 (M = Na, K, Rb)
191
Preparation of proton conductive composites with cesium hydrogen sulfate and phosphosilicate gel
192
Preparation of proton conductive composites with CsHSO4/CsH2PO4 and phosphosilicate gel
193
Preparation of Proton Conductive Phosphosilicate Gels Derived from 2-(Diethoxyphosphoryl)ethyltriethoxysilane
194
Preparation of proton exchange membranes based on crosslinked polytetrafluoroethylene for fuel cell applications
195
Preparation of proton-conducting composite membranes from sulfonated poly(ether ether ketone) and polyacrylonitrile
196
Preparation of proton-conducting sulfonated poly(ether ether ketone)/boron phosphate composite membranes by an in situ sol–gel process
197
Preparation of proton-conductive organic–inorganic hybrid titanophosphite membranes
198
Preparation of protonic layered manganates and their intercalation behavior
199
Preparation of proton–β/β″-aluminas by the ion-exchange under hydrothermal conditions and their characterisation
200
Preparation of proximal β-hydroxy silyl enol ethers from α,β-epoxyketones using silyllithium reagents
201
Preparation of prussian blue nanoparticles with single precursor
202
Preparation of Prussian blue@Pt nanoparticles/carbon nanotubes composite material for efficient determination of H2O2
203
Preparation of PS/TiO2 as a white pigment for electrophoretic displays
204
Preparation of pseudo glycoamino acid and its application to glycopeptide synthesis
205
Preparation of pseudo-pure states by line-selective pulses in nuclear magnetic resonance
206
Preparation of p-substituted tetrafluoropyridyl derivatives via the tetrafluoropyridylcopper reagent
207
Preparation of psychrometric charts for water vapour in Martian atmosphere
208
Preparation of Psyllium Mucilage and Acrylic Acid Based Hydrogels and their Application in Selective Absorption of Water from Different OillWater Emulsions.
209
Preparation of Pt catalysts supported on activated carbon felts (ACF) Original Research Article
210
Preparation of Pt deposited nanotubular TiO2 as cathodes for enhanced photoelectrochemical hydrogen production using seawater electrolytes
211
Preparation of Pt nanoparticle-loaded three-dimensional Fe3O4/carbon with high electro-oxidation activity Original Research Article
212
Preparation of Pt nanoparticles on carbon nanotubes by hydrothermal method
213
Preparation of Pt nanoparticles on carbon support using modified polyol reduction for low-temperature fuel cells
214
Preparation of Pt nanoparticles on different carbonaceous structure and their applications to methanol electro-oxidation
215
Preparation of Pt(II) and Pd(II) complexes coordinated with both a diimine ligand and a sulfur-rich dithiolate ligand and electrical conductivities of their oxidized species and X-ray crystal structure of Pd(N-butyl-pyridine-2-carbaldimine)(C3S5)
216
Preparation of Pt/Al2O3-Cl Catalyst and Investigation of Operating Variables Effects on Isomerization Reaction
217
Preparation of Pt/beta zeolite–Al2O3/cordierite monolith for automobile exhaust purification
218
Preparation of Pt/C electrode with double catalyst layers by electrophoresis deposition method for PEMFC
219
Preparation of Pt/C via a polyol process – Investigation on carbon support adding sequence
220
Preparation of Pt/MgO catalysts. Influence of the precursor metal salt and solvent used
221
Preparation of Pt/multiwalled carbon nanotubes modified Au electrodes via Pt–Cu co-electrodeposition/Cu stripping protocol for high-performance electrocatalytic oxidation of methanol
222
Preparation of Pt/NiO-C electrocatalyst and heat-treatment effect on its electrocatalytic performance for methanol oxidation
223
Preparation of Pt/SO42−single bondZrO2 by incipient wetness impregnation: Influence of the sulfur concentration in the isomerization of n-butane Original Research Article
224
Preparation of Pt/TiO2 nanocomposite films using co-sputtering method
225
Preparation of Pt/zeolite–Nafion composite membranes for self-humidifying polymer electrolyte fuel cells
226
Preparation of Pt/ZSM-5 films on stainless steel microreactors
227
Preparation of Pt-Co/C electrocatalysts by reduction with borohydride in acid and alkaline media: the effect on the performance of the catalyst
228
Preparation of Pt-loaded hydrogen selective membranes for methanol reforming
229
Preparation of Pt-loaded TiO2 nanofibers by electrospinning and their application for WGS reactions Original Research Article
230
Preparation of PtRu nanoparticles on various carbon supports using surfactants and their catalytic activities for methanol electro-oxidation
231
Preparation of Pt-Ru-Ni ternary nanoparticles by microemulsion and electrocatalytic activity for methanol oxidation
232
Preparation of PtRuNi/C electrocatalysts by an alcohol-reduction process for electro-oxidation of methanol Original Research Article
233
Preparation of Ptsingle bondRe/Al2O3 catalysts by surface redox reactions II. Influence of the acid medium on Re deposition and Ptsingle bondRe interaction Original Research Article
234
Preparation of PtSn/C electrocatalysts with improved activity and durability toward oxygen reduction reaction by alcohol-reduction process
235
Preparation of Pt–Sn/graphene catalysts and their activities for ethanol electrooxidation in polyol synthesis
236
Preparation of PtSnO2/C electrocatalysts using electron beam irradiation
237
Preparation of Pt–TiO2 composite particles by alcohol reduction method and their photocatalytic activities Original Research Article
238
Preparation of p-type CdS thin films and in situ dark conductivity in vacuum deposited CdS:Cu films
239
Preparation of p-type conductive transparent CuCrO2:Mg thin films by chemical solution deposition with two-step annealing
240
Preparation of p-type ZnO film on the GaAs substrate by thermal annealing treatment
241
Preparation of p-type ZnO films with (N,Ga) co-doping by MOVPE
242
Preparation of Pt-ZSM-5 zeolite membrane catalysts for the isomerization of linear alkane
243
Preparation of PtReAl2O3 catalysts by surface redox reactions I. Influence of operating variables on Re deposit in the presence of hydrochloric acid Original Resea
244
Preparation of PtReAl2O3 catalysts by surface redox reactions II. Influence of the acid medium on Re deposition and PtRe interaction Original Research Article
245
Preparation of Pu-doped fluorapatite
246
Preparation of pulse plated GaAs films Original Research Article
247
Preparation of Pure A12O3 and Alumina Doped with Oxides of Magnesium, Chromium and Manganese by Hydrothermal Oxidation of Aluminium Metal
248
Preparation of Pure A12O3 and Alumina Doped with Oxides of Magnesium, Chromium and Manganese by Hydrothermal Oxidation of Aluminium Metal
249
Preparation of pure boron coating film and its characterization by XPS and TDS
250
Preparation of pure cordierite through heat treatment of combustion synthesized magnesium aluminate spinel and silica nanoparticles
251
Preparation of pure hydrogen peroxide and anhydrous peroxide solutions from crystalline serine perhydrate
252
Preparation of pure vaterite by simple mechanical mixing of two aqueous salt solutions
253
Preparation of purified acylglycerols of eicosapentaenoic acid and docosahexaenoic acid and their re-esterification with conjugated linoleic acid
254
Preparation of PVA membrane for immobilization of GOD for glucose biosensor
255
Preparation of PVA/chitosan lipase membrane reactor and its application in synthesis of monoglyceride
256
Preparation of PVA/paraffin thermal regulating fiber by in situ microencapsulation
257
Preparation of PVA-GA-CS/PVA-Fe-SA bipolar membrane and its application in electro-generation of 2,2-dimethyl-3-hydroxypropionic acid
258
Preparation of PVC pitch from waste pipe
259
Preparation of PVDF based blend microporous membranes for lithium ion batteries by thermally induced phase separation: I. Effect of PMMA on the membrane formation process and the properties
260
Preparation of PVdF nanofiber membranes by electrospinning and their use as secondary battery separators
261
Preparation of PVDF/PEO-PPO-PEO blend microporous membranes for lithium ion batteries via thermally induced phase separation process
262
Preparation of PVdF/PSSA composite membranes using supercritical carbon dioxide for direct methanol fuel cells
263
Preparation of PVDF/PVP core–shell nanofibers mats via homogeneous electrospinning
264
Preparation of PVDF-based polymer inclusion membrane using ionic liquid plasticizer and Cyphos IL 104 carrier for Cr(VI) transport
265
Preparation of PVDF–HFP microporous membrane for Li-ion batteries by phase inversion
266
Preparation of PVP immobilized microporous chlorinated polyvinyl chloride membranes on fabric and their hydraulic permeation behavior
267
Preparation of PVP–PVA–exfoliated graphite cross-linked composite hydrogels for the incorporation of small tin nanoparticles
268
Preparation of pyrazole compounds for attachment to chelating resins
269
Preparation of pyrazoline nanoparticles with a membrane mixer
270
Preparation of pyrenebutyric acid bonded silica stationary phases for the application to the separation of fullerenes
271
Preparation of pyrenebutyric acid-modified magnesia–zirconia stationary phases using phosphonate as spacers and their application to the separation of fullerenes Original Research Article
272
Preparation of pyrene-functionalized fluorescent film with a benzene ring in spacer and sensitive detection to picric acid in aqueous phase
273
Preparation of pyridinyl aryl methanol derivatives by enantioselective hydrogenation of ketones using chiral Ru(diphosphine)(diamine) complexes. Attribution of their absolute configuration by 1H NMR spectroscopy using Mosherʹs reagent
274
Preparation of pyrimidin-2-one derivatives via base-mediated decomposition of uracil-analogues Fischer carbene complex
275
Preparation of pyrochlore-free PMN powder by semi-wet chemical route
276
Preparation of pyrrolidine and isoxazolidine benzamidines as potent inhibitors of coagulation factor Xa
277
Preparation of pyrrolidine–oxazoline containing ligands and their application in asymmetric transfer hydrogenation
278
Preparation of pyrrolin-2-ones and 4,5-dihydrodipyrrin-1-ones by oxidation of α-formylpyrroles and α-formyldipyrromethanes with hydrogen peroxide
279
Preparation of PZN–PT–BT ferroelectric ceramics by modified two-step method
280
Preparation of PZT discs for use in an acoustic wave sensor
281
Preparation of PZT powders and ceramics via a hybrid method of sol–gel and ultrasonic atomization
282
Preparation of PZT suspensions for direct ink jet printing
283
Preparation of PZT thick films by one-step firing sol-gel process
284
Preparation of PZT-based piezoceramics with transgranular fracture mode
285
Preparation of Q-state particles in Langmuir-Blodgett films
286
Preparation of Q-state particles in Langmuir–Blodgett films
287
Preparation of quality control materials for the determination of mercury in rice
288
Preparation of Quantum Dot-Biotin Conjugates and Their Use in Immunochromatography Assays
289
Preparation of quasicrystalline thin films and fine particles by gas evaporation
290
Preparation of quasicrystalline thin films and fine particles by gas evaporation
291
Preparation of quasi-monodispersed CdxZn1−xS nanocrystals and their optical properties
292
Preparation of quaternized poly(vinylidene fluoride) membrane by surface photografting and its antifouling performance for alkaline proteins Original Research Article
293
Preparation of quinolines from resin-bound esters using titanium reagents
294
Preparation of quinoxalines, dihydropyrazines, pyrazines and piperazines using tandem oxidation processes
295
Preparation of Radioactive Gold Nanoparticle by Neutron Activation
296
Preparation of radioactive targets for tandem accelerator experiments by high vacuum evaporation–condensation
297
Preparation of radioactive targets for tandem accelerator experiments by high vacuum evaporation–condensation
298
Preparation of radiochemically pore-filled polymer electrolyte membranes for direct methanol fuel cells
299
Preparation of rare earth metal ion/TiO2Hal-conducting polymers by ions imprinting technique and its photodegradation property on tetracycline
300
Preparation of rare earth-doped ZnO hierarchical micro/nanospheres and their enhanced photocatalytic activity under visible light irradiation
301
Preparation of RCM substrates for azepinoindole synthesis: reductive amination versus tetrahydro-γ-carboline formation
302
Preparation of reaction bonded silicon carbide (RBSC) using boron carbide as an alternative source of carbon
303
Preparation of reaction-bonded silicon carbide with well controlled structure by tape casting method
304
Preparation of Reactive and Thermal Stable Hyperbranched Graft Copolymers/ Clay Nanocomposite via ‘Living’ Free Radical Polymerization
305
Preparation of reactive Sr-celsian powders by solid-state reaction and their sintering
306
Preparation of reactive surfaces by electrografting
307
Preparation of reactively sputtered Sb-doped SnO2 thin films: Structural, electrical and optical properties
308
PREPARATION OF READY-TO-SERVE (RTS) BEVERAGE FROM PALMYRAH (Borassus flabellifer L.) FRUIT PULP
309
Preparation of reagents for the determination of fumonisin B1 by flow-injection immunoanalysis Original Research Article
310
Preparation of rechargeable biocidal polypropylene by reactive extrusion with diallylamino triazine
311
Preparation of recoverable Ru catalysts for liquid-phase oxidation and hydrogenation reactions Original Research Article
312
Preparation of recycled poly s tyrene derivatives to remove heavy metal ions from contaminated water
313
Preparation of recycle-typed Fe3Al alloy and its application for cutting tool materials
314
Preparation of red nitride phosphor from powder mixture of metal nitrides using spark plasma sintering
315
Preparation of red-emitting phosphor (Y,Gd)BO3:Eu3+ by high temperature ball milling
316
Preparation of redispersible dry emulsion using Eudragit E100 as both solid carrier and unique emulsifier
317
Preparation of reduced graphene oxide/cobalt oxide composites and their enhanced capacitive behaviors by homogeneous incorporation of reduced graphene oxide sheets in cobalt oxide matrix
318
Preparation of reduced graphene oxide/gelatin composite films with reinforced mechanical strength
319
Preparation of reduction-triggered degradable microcapsules for intracellular delivery of anti-cancer drug and gene
320
Preparation of reductive polypeptides from fresh placentas of dairy cows
321
Preparation of REFeAsO1−xFx (RE=Sm and Gd) superconductors at a relatively low temperature Original Research Article
322
Preparation of REFeCo alloy target materials for magneto-optical recording media
323
Preparation of REFeCo alloy target materials for magneto-optical recording media
324
Preparation of reference materials for rice kernels
325
Preparation of reflective and electrically conductive surface-silvered polyimide films from silver(I) complex and PMDA/ODA via an in situ single-stage technique
326
Preparation of reflective CsI photocathodes with reproducible high quantum efficiency
327
Preparation of regenerated cellulose/montmorillonite nanocomposite films via ionic liquids
328
Preparation of regioprotected morins by lipase-catalysed transesterification
329
Preparation of regioselectively feruloylated p-nitrophenyl α-l-arabinofuranosides and β-d-xylopyranosides—convenient substrates for study of feruloyl esterase specificity Original Research Article
330
Preparation of reproducible glassy carbon electrodes by removal of polishing impurities
331
Preparation of resin-bound alkynyl iodonium salts and their application in organic synthesis as alkynyl transfer reagents
332
Preparation of resistant starch by hydrolysis of maize starch with pullulanase
333
Preparation of resistant starch from starch–guar gum extrudates and their properties
334
Preparation of resorcinol formaldehyde (RF) carbon gels: Use of ultrasonic irradiation followed by microwave drying
335
Preparation of resorcinol–formaldehyde carbon cryogel microhoneycombs
336
Preparation of resveratrol-enriched grape juice from ultrasonication treated grape fruits
337
Preparation of resveratrol-enriched grape juice from ultrasonication treated grape fruits
338
Preparation of Reversible Thermochromic Ink for Flexography Printing on Paper and Study its Colorimetric Properties
339
Preparation of reversibly immobilized lysozyme onto Procion Green H-E4BD-attached poly(hydroxyethylmethacrylate) film for hydrolysis of bacterial cells
340
Preparation of reversibly photo-cross-linked nanogels from pH-responsive block copolymers and use as nanoreactors for the synthesis of gold nanoparticles
341
Preparation of RF organic aerogels and carbon aerogels by alcoholic sol–gel process
342
Preparation of rhenium hydride complexes with pyrazole and pyrazolato ligands
343
Preparation of rhenium-188–tin colloid as a radiation synovectomy agent and comparison with rhenium-188–sulfur colloid
344
Preparation of ribavirin analogues by copper- and ruthenium-catalyzed azide-alkyne 1,3-dipolar cycloaddition
345
Preparation of Rice Based ORS by Solution Method
346
Preparation of rifampicin/lactose microparticle composites by a supercritical antisolvent-drug excipient mixing technique for inhalation delivery
347
Preparation of rodlike t-ZrO2 nanoparticles by two-step calcination of 1,12-diaminododecane–zirconia mesostructured composites
348
Preparation of room temperature ionic liquids based on aliphatic onium cations and asymmetric amide anions and their electrochemical properties as a lithium battery electrolyte
349
Preparation of room temperature NO2 gas sensors based on W- and V-modified mesoporous MCM-41 thin films employing surface photovoltage technique
350
Preparation of Ru Nanoparticles Supported on γ-Al2O3 and Its Novel Catalytic Activity for Ammonia Synthesis
351
Preparation of Ru(η3-2-alkenylallyl)(CO)Cl(PPh3)2 complexes via carbometallation of allenes with alkenyl ruthenium complexes
352
Preparation of Ru–Cs catalyst and its application on hydrogen production by ammonia decomposition
353
Preparation of Ru-loaded CdS/Al-HMS nanocomposites and production of hydrogen by photocatalytic degradation of formic acid
354
Preparation of RuO2–YSZ nano-composite films by MOCVD
355
Preparation of ruthenium silanethiolato complexes and their reactions with sulfur dioxide; possible models for the activation of SO2 in the homogeneously catalyzed Claus reaction
356
Preparation of ruthenium(II) chloride complexes of polybasic amines
357
Preparation of ruthenium-loaded CNT–TiO2 nanohybrids and their catalytic performance for the selective oxidation of benzyl alcohol
358
Preparation of rutile (TiO2) nanostructured materials at low temperature from TiCl4 aqueous solution
359
Preparation of rutile titania nanocrystals by liquid method at room temperature
360
Preparation of S, C cation-codoped SrTiO3 and its photocatalytic activity under visible light Original Research Article
361
Preparation of samarium oxide nanoparticles and its catalytic activity on the esterification
362
Preparation of same acceleration maps for use in the improvement of structures in Sabzevar city
363
Preparation of sandwich-like self-assembled n-octanethiol film containing doped silver nanoparticles on silicon wafer and evaluation of its tribological properties
364
Preparation of Saussurea costus Traditional Oil and Investigation of Different Parameters for Standardization
365
Preparation of Sb3Nb3O13 powders using molten salt method
366
Preparation of SBA-15-PAMAM as a Nano Adsorbent for Removal of Acid Red 266 from Aqueous Media: Batch Adsorption and Equilibrium Studies
367
Preparation of Sb-doped ZnO nanostructures and studies on some of their properties
368
Preparation of SBF with different content and its influence on the composition of biomimetic apatites
369
Preparation of scale-like nickel cobaltite nanosheets assembled on nitrogen-doped reduced graphene oxide for high-performance supercapacitors
370
Preparation of Schiff Bases Derived from Chitosan and Investigate their Photostability and Thermal Stability
371
Preparation of scrap tire rubber fiber–silica fume mixtures for modification of clayey soils
372
Preparation of scrolled graphene oxides with multi-walled carbon nanotube templates Original Research Article
373
Preparation of SDC electrolyte thin films on dense and porous substrates by modified sol–gel route
374
Preparation of S-doped TiO2 photocatalysts and their photocatalytic activities under visible light Original Research Article
375
Preparation of Se-doped polyaniline emeraldine base films
376
Preparation of segmented, high molecular weight, aliphatic poly(ether-urea) copolymers in isopropanol. In-situ FTIR studies and polymer synthesis
377
Preparation of selective absorbers based on CuMn spinels by dip-coating method
378
Preparation of selective catalytic reduction catalysts via milling and thermal spreading Original Research Article
379
Preparation of selective surfaces and determination of optimum thickness for maximum selectivity
380
Preparation of selective surfaces of black cobalt by the sol-gel process
381
Preparation of selenium yeasts I. Preparation of selenium-enriched Saccharomyces cerevisiae
382
Preparation of Selenium-Doped Activated Carbon and its Utilization for Improving the Quality of USed Coconut Oil
383
Preparation of selenoanhydro- and telluroanhydroglycofuranosides and some corresponding nucleosides Original Research Article
384
Preparation of self-assembled cobalt nanocrystal arrays
385
Preparation of self-assembled monolayers with specific intermolecular interactions
386
Preparation of self-bursting microcapsules by interfacial polymerization
387
Preparation of self-lubricating composite coatings through a micro-arc plasma oxidation with graphite in electrolyte solution
388
Preparation of self-organized porous anodic niobium oxide microcones and their surface wettability Original Research Article
389
Preparation of self-organized porous tungsten oxide using HFCVD technique
390
Preparation of self-reinforcement of porous mullite ceramics through in situ synthesis of mullite whisker in flyash body
391
Preparation of self-supported dual-phase oxygen permeation membranes via chemical etching method
392
Preparation of self-supporting boron targets
393
Preparation of self-supporting boron targets
394
Preparation of self-supporting carbon thin films
395
Preparation of self-supporting carbon thin films
396
Preparation of self-supporting diamond-like carbon nanofoils with thickness less than 5 nm for laser-driven ion acceleration
397
Preparation of self-supporting diamond-like carbon nanofoils with thickness less than 5 nm for laser-driven ion acceleration
398
Preparation of self-supporting mesostructured silica thin film membranes as gateable interconnects for microfluidics
399
Preparation of self-supporting NaA zeolite membranes using geopolymers
400
Preparation of self-supporting nickel targets from 58Ni, 60Ni and 61Ni
401
Preparation of self-supporting nickel targets from 58Ni, 60Ni and 61Ni
402
Preparation of self-supporting targets with thickness <100 μg/cm2
403
Preparation of self-supporting targets with thickness <100 μg/cm2
404
Preparation of Semi-aromatic polyamide(PA)/multi-wall carbon nanotube (MWCNT) composites and its dynamic mechanical properties
405
Preparation of semi-interpenetrating polymer networks with adjustable mesh width and hydrophobicity
406
Preparation of SERS-active substrates using thermal inkjet technology
407
Preparation of sesame peptide and evaluation of antibacterial activity on typical pathogens
408
Preparation of seven- and eight-membered rings by carbon–carbon bond formation induced by samarium diiodide: 7-endo- and 8-endo-trig type cyclization to bicyclo[5.3.0]decanolone, bicyclo[5.4.0]undecanolone, and bicyclo[6.4.0]dodecanolone
409
Preparation of sewage sludge based activated carbon by using Fenton’s reagent and their use in 2-Naphthol adsorption
410
Preparation of shape-controlled CeO2 nanocrystals via microwave-assisted method
411
Preparation of shaped magnesium oxide/carbon catalysts using rice grains as an exotemplate and carbon precursor Original Research Article
412
Preparation of shape-stabilized co-crystallized poly (ethylene glycol) composites as thermal energy storage materials
413
Preparation of sharp gold tips for STM by using electrochemical etching method
414
Preparation of sheet polypyrrole with vertical anisotropy: A self-organized bending-beam actuator
415
Preparation of sheet-like electrolytes from poly(2-acrylamido-2-methyl-1-propanesulfonic acid)-deposited phenylsilsesquioxane particles
416
Preparation of short and water-dispersible carbon nanotubes by solid-state cutting Original Research Article
417
Preparation of short carbon nanotubes by mechanical ball milling and their hydrogen adsorption behavior Original Research Article
418
Preparation of Si powder thick films by low frequency alternating electrophoretic deposition
419
Preparation of Si/O/C nanotubes using Ge nanowires as template
420
Preparation of Si/O/C nanotubes using Ge nanowires as template
421
Preparation of Si3N4 ceramic foams by simultaneously using egg white protein and fish collagen
422
Preparation of Si3N4 ceramics with high strength and high reliability via a processing strategy
423
Preparation of sialon–transition metal silicide composites
424
Preparation of SiC and Si3N4 whiskers using bean-curd refuse as the Si source
425
Preparation of SiC and Si3N4 whiskers using bean-curd refuse as the Si source
426
Preparation of SiC ceramics by aqueous gelcasting and pressureless sintering
427
Preparation of SiC fiber-reinforced SiC composites
428
Preparation of SiC nanowires with fins by chemical vapor deposition
429
Preparation of SiC nanowires-filled cellular SiCO ceramics from polymeric precursor
430
Preparation of SiC reinforced Ti3SiC2-base composite and its biocompatibility evaluation
431
Preparation of SiC/Si3N4 composites with rod-like microstructure by combustion synthesis
432
Preparation of SiCf/SiC composites by the slip infiltration and transient eutectoid (SITE) process
433
Preparation of Si–C–H thin films embedded with high oriented (100) polycrystalline silicon
434
Preparation of Si–C–N–Fe magnetic ceramic derived from iron-modified polysilazane
435
Preparation of Si–C–O–N ceramic fibers from polycarbosilane
436
Preparation of SiC–SiO2–CuO composites
437
Preparation of Si–diamond–SiC composites by in-situ reactive sintering and their thermal properties
438
Preparation of sila-functional 3-sila-1-thiacyclohexanes
439
Preparation of silage from Spanish mackerel (Scomberomorus maculatus) and its evaluation in broiler diets
440
Preparation of silane modified SiO2 abrasive particles and their Chemical Mechanical Polishing (CMP) performances
441
Preparation of silane precursor microencapsulated intumescent flame retardant and its enhancement on the properties of ethylene–vinyl acetate copolymer cable
442
Preparation of silane-grafted pellets: silica bound reagents in a very convenient form
443
Preparation of silanethiols by reaction of silanes with triphenylphosphine sulfide and with alkanethiols
444
Preparation of silica aerogel from oil shale ash by fluidized bed drying
445
Preparation of silica aerogel from rice hull ash by drying at atmospheric pressure
446
Preparation of silica aerogel from rice hull ash by supercritical carbon dioxide drying
447
Preparation of silica- and carbon-supported cobalt by electrostatic adsorption of Co(III) hexaammines
448
Preparation of silica and TiO2–SiO2 core–shell nanoparticles in water-in-oil microemulsion using compressed CO2 as reactant and antisolvent
449
Preparation of silica and titanium-containing silica hollow spheres at supercritical CO2/H2O interface
450
Preparation of silica coated iron oxide nanoparticles using non-transferred arc plasma
451
Preparation of silica encapsulated carbon black with high thermal stability
452
Preparation of silica encapsulated CdSe quantum dots in aqueous solution with the improved optical properties
453
Preparation of silica fibers and non-woven cloth by electrospinning
454
Preparation of silica gels in electrostatic field
455
Preparation of silica microrods with nano-sized pores in ionic liquid microemulsions
456
Preparation of silica microspheres coated with V2O5 xerogel and V2O5/WO3 composite xerogel via adapted Stِber process
457
Preparation of silica nanoparticles from semi-burned rice straw ash
458
Preparation of silica nanoparticles: determination of the optimal synthesis conditions for small and uniform particles
459
Preparation of silica nanowires using porous silicon as Si source
460
Preparation of silica particles doped with uniformly dispersed copper oxide nano-clusters
461
Preparation of silica powder with high whiteness from palygorskite
462
Preparation of silica xerogel with high silanol content from sodium silicate and its application as CO2 adsorbent
463
Preparation of silica-alumina catalyst by the sol-gel method and its activity for the Diels-Alder reaction of isoprene and acrylaldehyde Original Research Article
464
Preparation of Silica-Coated Magnetite Nanoparticles with Thiophosphoramide for Removal of Heavy Metals from Aqueous Solutions
465
Preparation of Silica-Coated Rhodium Nanoparticles Using Water-in-Oil Microemulsion
466
Preparation of Silicagel-MnO2 Nanocomposite Adsorbent for Malachite Green Removal
467
Preparation of silica-layered multi-walled carbon nanotubes activated by grafting of poly(4-vinylpyridine)
468
Preparation of Silicalite Membranes on Stainless Steel Grid Supports
469
Preparation of silicalite-1 membrane by solution-filling method and its alcohol extraction properties
470
Preparation of silicalite-1 membranes on stainless steel supports by a two-stage varying-temperature in situ synthesis
471
Preparation of Silicalite-1 Micromembranes on LaserPerforated Stainless Steel Sheets
472
Preparation of silica-magnetite nanoparticle mixed hemimicelle sorbents for extraction of several typical phenolic compounds from environmental water samples
473
Preparation of silica-modified TiO2 and application to dye-sensitized solar cells
474
Preparation of silica–PS composite particles and their application in PET
475
Preparation of silica–silver heterogeneous nanocomposite particles by one-pot preparation strategy using polyol process: Size-controlled immobilization of silver nanoparticles
476
Preparation of silica-supported porous sorbent for heavy metal ions removal in wastewater treatment by organic–inorganic hybridization combined with sucrose and polyethylene glycol imprinting Original Research Article
477
Preparation of silica-sustained electrospun polyvinylpyrrolidone fibers with uniform mesopores via oxidative removal of template molecules by H2O2 treatment
478
Preparation of silicate foams using HSi(OC2H5)3 and their NOx adsorption behavior
479
Preparation of silicate tungsten bronzes on aluminum by plasma electrolytic oxidation process in 12-tungstosilicic acid
480
Preparation of silicon carbide nanowires via a rapid heating process
481
Preparation of silicon carbide nitride thin ®lms by sputtering of silicon nitride target
482
Preparation of silicon carbide reticulated porous ceramics
483
Preparation of silicon carbide reticulated porous ceramics
484
Preparation of silicon carbide SiC-based nanopowders by the aerosol-assisted synthesis and the DC thermal plasma synthesis methods
485
Preparation of Silicon Carbide with High Properties
486
Preparation of silicon carbide–silicon nitride composite foams from pre-ceramic polymers
487
Preparation of silicon nanoaggregates by thermal activated reaction
488
Preparation of silicon nanoparticles for device of photoluminescence
489
Preparation of silicon nanowires by in situ doping and their electrical properties
490
Preparation of silicon nitride powder from silica and ammonia
491
Preparation of silicon oxycarbide films by laser ablation of SiO/3C–SiC multicomponent targets
492
Preparation of silicon thin films by intense pulsed ion-beam evaporation method with low temperature process
493
Preparation of silicon-based oxide layer on high-crystalline SiC fiber as an interphase in SiC/SiC composites
494
Preparation of silk fibroin-supported Pd(0) catalyst for chemoselective hydrogenation: reduction of palladium(II) acetate by methanol on the protein
495
Preparation of siloxacyclopentene containing 1,3-dienes and their Diels–Alder reactions
496
Preparation of silver behenate coatings to provide low- to mid-angle diffraction calibration
497
Preparation of silver colloid and enhancement of dispersion stability in organic solvent
498
Preparation of Silver Dendritic Nanoparticles Using Sodium Polyacrylate in Aqueous Solution
499
Preparation of silver dispersed PbTiO3 film by sol-gel method
500
Preparation of silver hexacyanoferrate nanoparticles and its application for the simultaneous determination of ascorbic acid, dopamine and uric acid
501
Preparation of silver hollow nanostructures by plasmon-driven transformation
502
Preparation of Silver Immobilised TiO2-Hectorite for Phenol Removal and Eschericia coli Desinfection
503
Preparation of silver nanoparticle containing silica micro beads and investigation of their antibacterial activity
504
Preparation of silver nanoparticle-containing semi-interpenetrating network hydrogels composed of pluronic and poly(acrylamide) with antibacterial property
505
Preparation of silver nanoparticles by chemical reduction method
506
Preparation of silver nanoparticles by laser ablation in polyvinylpyrrolidone solutions
507
Preparation of silver nanoparticles by laser ablation in solution: influence of laser wavelength on particle size
508
Preparation of silver nanoparticles from silver(I) nano-coordination polymer
509
Preparation of silver nanoparticles in hexagonal phase formed by nonionic Triton X-100 surfactant
510
Preparation of silver nanoparticles in inorganic clay suspensions
511
Preparation of silver nanoparticles in soda-lime silica glass by an electrochemical procedure
512
Preparation of silver nanoparticles in the presence of chitosan by electrochemical method
513
Preparation of silver nanoparticles on ITO surfaces by a double-pulse method
514
Preparation of silver nanoparticles on the surface of fine magnetite particles by a chemical reduction
515
Preparation of silver nanoparticles templated from amphiphilic block copolymer-based hexagonal liquid crystals
516
Preparation of silver nanoparticles using chitosan suspensions
517
Preparation of silver nanoparticles using the SPG membrane emulsification technique
518
Preparation of silver nanoparticles using tryptophan and its formation mechanism
519
Preparation of Silver Nanoparticles via Reduction of a Highly CO2-Soluble Hydrocarbon-Based Metal Precursor
520
Preparation of silver nanopatterns on DNA templates
521
Preparation of silver nanopowder by thermal plasma
522
Preparation of Silver Nanorods by Rapid Microwave Heating
523
Preparation of silver nanorods through the control of temperature and pH of reaction medium
524
Preparation of silver nanostructure from silver(I) coordination polymer and fabrication of nano silver(I) bromide by reverse micelles technique
525
Preparation of silver nanostructures from a new benzopyrazine silver(I) nitrate coordination polymer
526
Preparation of silver particles and its application for surface enhanced Raman scattering with near-infrared excitation
527
Preparation of silver powders in micron size from used photographic films via leaching–cementation technique
528
Preparation of silver quantum dots embedded water-soluble silica/PAAc hybrid nanoparticles and their bactericidal activity
529
Preparation of silver, gold and silver–gold bimetallic nanoparticles in w/o microemulsion containing TritonX-100
530
Preparation of silver/hydroxyapatite nanocomposite spheres
531
Preparation of silver-coated copper powder and its oxidation resistance research
532
Preparation of silver-containing starch nanocomposite prepared from green synthesis with green tea plant extract and investigation of dye degradation and antibacterial activity
533
Preparation of silver-containing starch nanocomposite prepared from green synthesis with green tea plant extract and investigation of dye degradation and antibacterial activity
534
Preparation of silybin and isosilybin sulfates by sulfotransferase from Desulfitobacterium hafniense
535
Preparation of silybin phase II metabolites: Streptomyces catalyzed glucuronidation
536
Preparation of silyl enol ethers from acyloin derivatives using silyllithium reagents
537
Preparation of Silyl Esters by ZnCl2-Catalyzed Dehydrogenative Cross-Coupling of Carboxylic Acids and Silanes
538
Preparation of silyl polyenol ethers by carbonyl olefination of silyl esters
539
Preparation of silylated magadiite thin-film-containing covalently attached pyrene chromophores
540
Preparation of silylated α-zirconium phosphate and its thermal behavior
541
Preparation of single conjugated polymer nanofibers with high opto-electric response
542
Preparation of single crystalline NaSr2Nb5O15 particles with acicular morphology
543
Preparation of single crystalline regions in amorphous silicon layers on glass by Arq laser irradiation
544
Preparation of single crystalline Sr0.5Ba0.5Nb2O6 particles
545
Preparation of single or double-network chitosan/poly(vinyl alcohol) gel films through selectively cross-linking method
546
Preparation of single or double-network chitosan/poly(vinyl alcohol) gel films through selectively cross-linking method
547
Preparation of single phase nano-sized β-SiAlON powders by nitridation of silica–alumina gel in ammonia
548
Preparation of single-crystal copper ferrite nanorods and nanodisks
549
Preparation of single-crystalline LiNi0.5Mn0.5O2 nanosheets as cathodes for highly reversible lithium-ion batteries
550
Preparation of single-enantiomer 2-methyl-4-heptanol, a pheromone of Metamasius hemipterus, using (S)-2-methoxy-2-(1-naphthyl)propionic acid
551
Preparation of single-hole silica hollow microspheres by precipitation-phase separation method
552
Preparation of single-molecule particles of water-soluble polymers
553
Preparation of single-phase magnesium silicon nitride powder by a two-step process
554
Preparation of SiNx film by pulsed laser ablation in nitrogen gas ambient
555
Preparation of SiO2 coated Ce2S3 red pigment with improved thermal stability
556
Preparation of SiO2/ZrO2 ceramic nanocomposite coating on Aluminum alloys as metallic part of the photovoltaic cells and study its corrosion behavior.
557
Preparation of SiO2–SiC composites with a precursor method
558
Preparation of SiOxNy films by reactive KrF laser ablation
559
Preparation of Site-Specific Antibodies to Acetylated Histones
560
Preparation of size and habit-controlled nano crystallites of tungsten oxide
561
Preparation of size-controlled bovine serum albumin (BSA) nanoparticles by a modified desolvation method
562
Preparation of size-controlled cross-linked fluoroalkyl end-capped oligomer/gold nanocomposites
563
Preparation of size-controlled fine Al particles for application to rear electrode of Si solar cells
564
Preparation of size-controlled tungsten oxide nanoparticles and evaluation of their adsorption performance
565
Preparation of skinless polymer foam with supercritical carbon dioxide and its application to a photoinduced hydrogen evolution system
566
Preparation of SLN-containing Thermoresponsive In-situ Forming Gel as a Controlled Nanoparticle Delivery System and Investigating its Rheological, Thermal and Erosion Behavior
567
Preparation of sludge derived magnetic porous carbon and their application in Fenton-like degradation of 1-diazo-2-naphthol-4-sulfonic acid
568
Preparation of sludge-based activated carbon made from paper mill sewage sludge by steam activation for dye wastewater treatment Original Research Article
569
Preparation of Sm0.2Ce0.8O1.9 membranes on porous substrates by a slurry spin coating method and its application in IT-SOFC
570
Preparation of Sm3H7 nanoparticles and their application in ammonia synthesis
571
Preparation of small diameter vascular grafts by electrospinning of biodegradable/bioerodible polymers
572
Preparation of smart paper part I—formation of nylon microcapsules on paper surface using interfacial polymerization
573
Preparation of Sm-doped ceria (SDC) nanowires and tubes by gas–liquid co-precipitation at room temperature
574
Preparation of Sm-loaded brookite TiO2 photocatalysts
575
Preparation of smooth and dense composite films consisting of MEHPPV and neat C60 by means of electrophoretic deposition
576
Preparation of smooth potassium hexatitanate nanofilms by sol–gel method
577
Preparation of smooth siloxane surfaces for AFM visualization of immobilized biomolecules
578
Preparation of SmxCe1 − xO2(SDC) electrolyte film with gradient structure via a gas-phase controlling convection–diffusion approach on porous substrate
579
Preparation of Sn films deposited on carbon nanotubes
580
Preparation of Sn–Co alloy electrode for lithium ion batteries by pulse electrodeposition
581
Preparation of Sn-modified silica-coated Pt catalysts: A new Ptsingle bondSn bimetallic model catalyst for selective hydrogenation of crotonaldehyde
582
Preparation of SnO2 hollow nanospheres by a solvothermal method
583
Preparation of sodium alginate–methylcellulose blend microspheres for controlled release of nifedipine
584
Preparation of sodium aluminate from the leach liquor of diasporic bauxite in concentrated NaOH solution
585
Preparation of SOFC anode composites by spray pyrolysis
586
Preparation of soft solder joints
587
Preparation of soft-agglomerated nano-sized ceramic powders by sol–gel combustion process
588
Preparation of solar grade silicon from optical fibers wastes with thermal plasmas
589
Preparation of sol–gel polyethylene glycol–polydimethylsiloxane–poly(vinyl alcohol)-coated sorptive bar for the determination of organic sulfur compounds in water
590
Preparation of sol-gel sulfated ZrO2single bondSiO2 and characterization of its surface acidity Original Research Article
591
Preparation of sol–gel TiO2/purified Na-bentonite composites and their photovoltaic application for natural dye-sensitized solar cells
592
Preparation of solid acid catalyst from glucose–starch mixture for biodiesel production
593
Preparation of solid acid catalyst packing AAO/SBA-15-SO3H and application for dehydration of xylose to furfural
594
Preparation of solid carbon spheres by pyrolysis of allyl COPNA-BMI resin
595
Preparation of solid carbon spheres by pyrolysis of allyl COPNA-BMI resin
596
Preparation of solid contact potentiometric sensors with self-plasticizing triblock polymer and ionic liquid-polymer composites
597
Preparation of solid lipid particles by membrane emulsification—Influence of process parameters
598
Preparation of solid nickel nanoparticles by large-scale spray pyrolysis of Ni(NO3)2·6H2O precursor: Effect of temperature and nickel acetate on the particle morphology
599
Preparation of Solid Phase Microextraction (SPME) Probes through Polyaniline Multiwalled Carbon Nanotubes (PANI/MWCNTs) Coating for the Extraction of Palmitic Acid and Oleic Acid in Organic Solvents
600
Preparation of solid self-emulsifying drug delivery systems using magnesium aluminometasilicates and fluid-bed coating process
601
Preparation of Solid Superacid SO42-/ZnO-TiO2 and Its Action on Synthesis of Dimethyl Carbonate from Urea and Methanol
602
Preparation of solid water-equivalent radioactive standards
603
Preparation of solid-phase microextraction fiber coated with single-walled carbon nanotubes by electrophoretic deposition and its application in extracting phenols from aqueous samples
604
Preparation of solid-phase microextraction fibers by in-mold coating strategy for derivatization analysis of 24-epibrassinolide in pollen samples
605
Preparation of solid-state composite electrolytes based on organic/inorganic hybrid star-shaped polymer and PEG-functionalized POSS for all-solid-state lithium battery applications
606
Preparation of solid-state samples of a transition metal coordination compound for synchrotron radiation photoemission studies
607
Preparation of soluble and insoluble polymer supported IBX reagents
608
Preparation of soluble functional polymers by modification of nanosized polyacetylene
609
Preparation of soluble N and o-alkylated polyanilines using a chemical biphasic process
610
Preparation of soluble polyimide–silver nanocomposites by a convenient ultraviolet irradiation technique
611
Preparation of solvent stable polyphenylsulfone hollow fiber nanofiltration membranes
612
Preparation of solvent-resistant anion-exchange membranes
613
Preparation of Some 1,2,4-Triazol Schiff Bases as Urease Inhibitors and Study Their Effect on Proteus Mirabilis Bacteria
614
Preparation of some angularly substituted and highly functionalized quinolizidines as building blocks for the synthesis of various alkaloids and related scaffolds of medicinal interest
615
Preparation of some azo compounds by diazotization and coupling of 2- amino -5 – thiol -1,3,4- thiadizaole
616
Preparation of Some Bifunctional Catalysts for Direct Conversion of Synthesis Gas to Dimethyl Ether
617
Preparation of Some Colored Food Products using Sweet Pepper as A Functional Component
618
Preparation of some dinuclear rhodium complexes with the orthometallated ligand [2,6-(PPh2CH2)2C6H3]− and their catalytic activity for polymerization of phenylacetylene
619
Preparation of some metal ferrite MFe2O4 thin films through a nonaqueous sol method
620
Preparation of some metal phosphides by ball milling
621
Preparation of some metal phosphides by ball milling
622
Preparation of some starch ethers using the semi-dry state process
623
Preparation of some starch-based neutral chelating agents Original Research Article
624
Preparation of Sound Absorption Material Based on Interpenetrating Polymer Network (PU/PMMA IPN)
625
Preparation of soy hull pectin
626
Preparation of Soy Protein Concentrate by Ultrafiltration
627
Preparation of spacer-containing di-, tri-, and tetrasaccharide fragments of the circulating anodic antigen of Schistosoma mansoni for diagnostic purposes
628
Preparation of SPE hybrid mesoporous silica sorbents for the analysis and removal of organic pollutants in water
629
Preparation of special cements from red mud
630
Preparation of spent brewer’s yeast β-glucans with a potential application as an immunostimulant for black tiger shrimp, Penaeus monodon
631
Preparation of spent brewers yeast (beta)-glucans for potential applications in the food industry
632
Preparation of spherical activated carbon with high electric double-layer capacitance
633
Preparation of spherical and dense Na2O–B2O3–SiO2 glass powders by ultrasonic spray pyrolysis technique
634
Preparation of spherical apatite particles by the homogeneous precipitation method in the presence of magnesium ions and their ion-exchange properties
635
Preparation of spherical foamed body with function of media for waste water treatment by using waste LCD glass
636
Preparation of spherical fuel elements for HTR-PM in INET
637
Preparation of spherical hydrous-zirconia nanoparticles by low temperature hydrolysis in a reverse microemulsion
638
Preparation of spherical iron nanoclusters in ethanol–water solution for nitrate removal
639
Preparation of spherical MCM-41 molecular sieve at room temperature: Influence of the synthesis conditions in the structural properties
640
Preparation of spherical nanoparticles of LaAlO3 via the reverse microemulsion process
641
Preparation of spherical particles of Li2TiO3 (with diameters below 100 μm) by sol–gel process
642
Preparation of spherical silica in emulsion systems using the co-precipitation technique
643
Preparation of spherical silica particles in reverse micro emulsions using silicon tetrachloride as precursor
644
Preparation of spherical silica powder by oxygen–acetylene flame spheroidization process
645
Preparation of spherical silver particles for solar cell electronic paste with gelatin protection
646
Preparation of spherical spinel LiMn2O4 cathode material for Li-ion batteries
647
Preparation of spherical ultrafine zirconia powder in microemulsion system and its dispersibility
648
Preparation of spherical zirconia powder in microemulsion system and its densification behavior
649
Preparation of spherulites from amylose–palmitic acid complexes
650
Preparation of spherulites from amylose–palmitic acid complexes
651
Preparation of spherulites from jet cooked mixtures of high amylose starch and fatty acids. Effect of preparative conditions on spherulite morphology and yield
652
Preparation of spindly CuO micro-particles for photodegradation of dye pollutants under a halogen tungsten lamp Original Research Article
653
Preparation of spinel ferrites from citrate precursor route—A comparative study
654
Preparation of spinel Li1.06Mn2O4−zClz cathode materials by the citrate gel method
655
Preparation of spinel lithium manganese oxide by aqueous co-precipitation
656
Preparation of Spiropiperidines in Water
657
Preparation of spongy microspheres consisting of functionalized multiwalled carbon nanotubes
658
Preparation of spongy microspheres consisting of functionalized multiwalled carbon nanotubes
659
Preparation of spray-dried microparticles using Gelucire 44/14 and porous calcium silicate or spherical microcrystalline cellulose to enhance transport of water-insoluble pranlukast hemihydrate across Caco-2 monolayers
660
Preparation of spray-dried powders leading to Nd:YAG ceramics: The effect of PVB adhesive
661
Preparation of Sr2Fe1–xScxMoO6–δ nanopowders and its electrical conductivity
662
Preparation of Sr2SiO4:Eu3+ phosphors by microwave-assisted sintering and their luminescent properties
663
Preparation of SrCe0.95Yb0.05O3−α perovskite for use as a membrane material in hollow fibre fabrication
664
Preparation of SrCe0.95Yb0.05O3–α hollow fibre membranes: Study on sintering processes
665
Preparation of SrS:Eu, Sm and its photostimulated luminescence
666
Preparation of SrTi0.1Fe0.9O3−δ and its photocatalysis activity for degradation of methyl orange in water
667
Preparation of SrTiO3 nanofibres by hydrothermal method
668
Preparation of SrTiO3 nanomaterial from layered titanate nanotubes or nanowires
669
Preparation of SrTiO3 thin films by the liquid phase deposition method
670
Preparation of SrTiO3-supported TiO2 photocatalyst
671
Preparation of SrZn2(PO4)2:Eu2+,Mn2+ phosphor and its photoluminescent properties
672
Preparation of S-sulfo albumin film and its cell adhesive property
673
Preparation of stabilized Gd-doped BaPrO3 materials by Zr substitution
674
Preparation of stabilized lidocaine particles by a combination of supercritical CO2 technique and particle surface control
675
Preparation of stable acrylate/montmorillonite nanocomposite latex via in situ batch emulsion polymerization: Effect of clay types
676
Preparation of stable aqueous dispersion of graphene nanosheets and their electrochemical capacitive properties
677
Preparation of stable carbon nanotube aerogels with high electrical conductivity and porosity Original Research Article
678
Preparation of stable CdS nanoparticles in aqueous medium and their hydrogen generation efficiencies in photolysis of water
679
Preparation of stable dispersion of barium titanate nanoparticles: Potential applications in biomedicine
680
Preparation of stable dispersions of Ni nanoparticles using a polymeric dispersant in water
681
Preparation of stable enteric folic acid-loaded microfiber using the electrospinning method
682
Preparation of stable fulvene and difulvene aldehydes from benzaldehydes and an indene-derived enamine: formation of novel indene-fused benzodiazepines and attempted syntheses of di- and tricarbaporphyrinoid systems
683
Preparation of stable gelatin/sodium carboxymethylcellulose/sodium lauryl sulfonate microcapsules with ultra-thin capsule wall for electrophoretic displays
684
Preparation of stable MCM-48 tubular membranes
685
Preparation of stable mesoporous inorganic oxides via nano-replication technique
686
Preparation of stable mesoporous silica FSM-16 from water glass in the presence of cetylpyridium bromide
687
Preparation of stable micelle-like particles with rigid backbones based on pyridyl-terminated poly (aryl ether ketone)
688
Preparation of stable Pd nanocubes and their use in biological labeling
689
Preparation of Stable Plurilamellar Liposomes Dispersed in Two Soluble Types of Collagens and the Effect of Collagens on the Release Rate of Entrapped Sodium Chromate
690
Preparation of stable polyurethane–polystyrene copolymer emulsions via RAFT polymerization process
691
Preparation of stable porous nickel and cobalt oxides using simple inorganic precursor, instead of alkoxides, by a sonochemical technique
692
Preparation of stable porous nickel and cobalt oxides using simple inorganic precursor, instead of alkoxides, by a sonochemical technique
693
Preparation of stable spherical micelles with rigid backbones based on polyaryletherketone copolymers containing lateral pyridyl groups
694
Preparation of stable sub 10 nm copper nanopowders redispersible in polar and non-polar solvents
695
Preparation of stable sulfated zirconia by thermal activation from a zirconium doped mesoporous MCM-41 silica: Application to the esterification of oleic acid with methanol
696
Preparation of stable suspensions of gold nanoparticles in water by sonoelectrochemistry
697
Preparation of stable suspensions of gold nanoparticles in water by sonoelectrochemistry
698
Preparation of Stable, Granular Formulations ContainingFusarium oxysporumPathogenic to Narcotic Plants
699
Preparation of stainless steel microreactors coated with carbon nanofiber layer: Impact of hydrocarbon and temperature
700
Preparation of stair-step grooves by wet etching of AlAs/GaAs heterostructures and MOCVD growth of QWR
701
Preparation of stair-step grooves by wet etching of AlAs/GaAs heterostructures and MOCVD growth of QWR
702
Preparation of star copolymers with three arms of poly(ethylene oxide-co-glycidol)-graft-polystyrene and investigation of their aggregation in water
703
Preparation of star polymers based on polystyrene or poly(styrene-b-N-isopropyl acrylamide) and divinylbenzene via reversible addition-fragmentation chain transfer polymerization
704
Preparation of starch betainate: a novel cationic starch derivative
705
Preparation of starch derivatives using reactive extrusion and evaluation of modified starches as shell materials for encapsulation of flavoring agents by spray drying Original Research Article
706
Preparation of starch-based nanoparticles through high-pressure homogenization and miniemulsion cross-linking: Influence of various process parameters on particle size and stability
707
Preparation of starch-based scaffolds for tissue engineering by supercritical immersion precipitation
708
Preparation of starches with low glycaemic response using amylosucrase and their physicochemical properties
709
Preparation of starch-g-polystyrene copolymer by emulsion polymerization
710
Preparation of starch–sodium lignosulfonate graft copolymers via laccase catalysis and characterization of antioxidant activity
711
Preparation of starch-stabilized silver nanoparticles from amylose–sodium palmitate inclusion complexes
712
Preparation of stationary phases for open-tubular capillary electrochromatography using the sol–gel method
713
Preparation of stationary phases for reversed-phase high-performance liquid chromatography using thermal treatments at high temperature
714
Preparation of steam-activated carbons as catalyst supports
715
Preparation of stem cell aggregates with gelatin microspheres to enhance biological functions
716
Preparation of sterically congested 1,3,4-oxadiazole derivatives from N-isocyaniminotriphenylphosphorane, aromatic acids, cyclopentanone and primary amines
717
Preparation of sterol-imprinted polymers with the use of 2-(methacryloyloxy)ethyl phosphate
718
Preparation of S-TiO2 photocatalyst and photodegradation of L-acid under visible light
719
Preparation of stir bars for sorptive extraction based on monolithic material
720
Preparation of stir bars for sorptive extraction using sol–gel technology
721
Preparation of stoichiometric GaN(0 0 0 1)-1 × 1 studied with spectromicroscopy
722
Preparation of Strong Antidandruff Shampoo Using Medicinal Plant Extracts: A Clinical Trial and Chronic Dandruff Treatment
723
Preparation of strongly fluorescent silica nanoparticles of polyelectrolyte-protected cadmium telluride quantum dots and their application to cell toxicity and imaging Original Research Article
724
Preparation of Strontium Bismuth Tantalum (SBT) Fine Powder by Sol-Gel Process Using Bismuth Subnitrate as Bismuth Source
725
Preparation of strontium-based fibers via electrospinning technique
726
Preparation of structurally controlled dilute molybdenum–titanium alloys through a novel multi-step internal nitriding technique and their mechanical properties
727
Preparation of structured sol–gel films using tape casting method
728
Preparation of Students Completing a Core-Plus or Commercially Developed High School Mathematics Curriculum for Intense College Mathematics Coursework
729
Preparation of styrene-co-4-vinylpyridine magnetic polymer beads by microwave irradiation for analysis of trace 24-epibrassinolide in plant samples using high performance liquid chromatography
730
Preparation of submicrometer nickel powders by the reduction from nonaqueous media
731
Preparation of sub-micrometer porous membrane from chitosan/polyethylene glycol semi-IPN
732
Preparation of submicrometer-sized copper and silver crystallites by a facile solvothermal complexation–reduction route
733
Preparation of sub-micron colored particles by controlled emulsion polymerization
734
Preparation of submicron LaCaMnO submicron powder and LaCaMnO–alumina composites with CMR effects by a new method: Precursor sintering technique
735
Preparation of submicron nickel powders by microwave-assisted hydrothermal method
736
Preparation of sub-micron PZT particles with the sol–gel technique
737
Preparation of submicron talc particles by sonication
738
Preparation of submicron-sized Mg(OH)2 particles through precipitation
739
Preparation of submicron-sized RDX particles by rapid expansion of solution using compressed liquid dimethyl ether
740
Preparation of substituted 1,2,3,4-tetrahydroquinoxalines and 2,3,4,5-tetrahydro-1H-benzo[b][1,4]diazepines from catalytic Cp∗Ir hydrogen transfer N-heterocyclization of anilino alcohols
741
Preparation of substituted allyl acetates and sulfones from Baylis–Hillman adducts in ionic liquid media
742
Preparation of substituted chlorins and benzochlorins
743
Preparation of substituted polyaniline/chitosan composites by in situ electropolymerization and their application to glucose sensing
744
Preparation of substituted pyrroles via Ru(II)-catalyzed coupling of alkynes with enamides
745
Preparation of substituted semicarbazides from corresponding amines and hydrazines via phenyl carbamates
746
Preparation of substituted transition-metal (η1-propargyl complexes and their [3+2] cycloaddition reactions with sulfur dioxide and disulfur monoxide. Transition-metal–carbon bond cleaving reactions of the cycloadducts which yield oxathiolene oxides and d
747
Preparation of succinylated derivatives of psyllium and their physicochemical and bile acid-binding properties
748
Preparation of sucrose heptaesters unsubstituted at the C-1 hydroxy group of the fructose moiety via selective O-desilylation
749
Preparation of sugarcane bagasse cellulosic phthalate using an ionic liquid as reaction medium
750
Preparation of sugarcane bagasse hemicellulosic succinates using NBS as a catalyst
751
Preparation of sugar-derived 1,2-diamines via indium-catalyzed aza-Henry-type reaction: application to the synthesis of 6-amino-1,6-dideoxynojirimycin
752
Preparation of sulfated zirconia catalysts with improved control of sulfur content II. Effect of sulfur content on physical properties and catalytic activity Original Research Article
753
Preparation of sulfated zirconia catalysts with improved control of sulfur content Original Research Article
754
Preparation of sulfated zirconia catalysts with improved control of sulfur content, III. Effect of conditions of catalyst synthesis on physical properties and catalytic activity Original Research Article
755
Preparation of sulfated-chitins under homogeneous conditions
756
Preparation of sulfated-chitins under homogeneous conditions
757
Preparation of sulfoacetate derivatives of cellulose by direct esterification Original Research Article
758
Preparation of sulfonamides from N-silylamines
759
Preparation of sulfonated crosslinked PTFE-graft-poly(alkyl vinyl ether) membranes for polymer electrolyte membrane fuel cells by radiation processing
760
Preparation of sulfonated graphene/polypyrrole solid-phase microextraction coating by in situ electrochemical polymerization for analysis of trace terpenes
761
Preparation of sulfonated graphene–polyaniline nanofiber composites by oil/water interfacial polymerization and their application for supercapacitors
762
Preparation of sulfonated ordered mesoporous carbon and its use for the esterification of fatty acids
763
Preparation of sulfonated overoxidized polypyrrole film applicable as an SPME tool for cationic analytes
764
Preparation of sulfonated poly(phthalazinone ether sulfone ketone) composite nanofiltration membrane
765
Preparation of Sulfonated PVA-TMSP Membranes for Direct Methanol Fuel Cell
766
Preparation of sulfonated SEBS block copolymer membranes and their permeation properties Original Research Article
767
Preparation of Sulfur Mortar from Modified Sulfur
768
Preparation of sulfur-doped microporous carbons for the storage of hydrogen and carbon dioxide Original Research Article
769
Preparation of sulfuric acid ([3-(3-silicapropyl)sulfanyl]propyl)ester: A new and recyclable catalyst for the formylation and acetylation of alcohols under heterogeneous conditions Original Research Article
770
Preparation of Super Soft Granules from Nanosized Ceramic Powders by Spray Freezing
771
Preparation of super water-repellent membrane by radiation-induced copolymerization
772
Preparation of superabsorbent cellulosic hydrogels
773
Preparation of superacids by metal oxides for reactions of butanes and pentanes Original Research Article
774
Preparation of superconducting HgBa2CaCu2Ox thin films on the distinct substrates
775
Preparation of superhard amorphous carbon films with low internal stress
776
Preparation of super-hydrophilic amorphous titanium dioxide thin film via PECVD process and its application to dehumidifying heat exchangers
777
Preparation of superhydrophilic mesoporous SiO2 thin films
778
Preparation of superhydrophobic and UV blocking cotton fabric via sol–gel method and self-assembly
779
Preparation of superhydrophobic boehmite and anatase nanocomposite coating films
780
Preparation of superhydrophobic coating using modified CaCO3
781
Preparation of superhydrophobic cotton fabrics based on SiO2 nanoparticles and ZnO nanorod arrays with subsequent hydrophobic modification
782
Preparation of superhydrophobic films on copper substrate for corrosion protection
783
Preparation of superhydrophobic films on titanium as effective corrosion barriers
784
Preparation of super-hydrophobic films using pulsed hexafluorobenzene plasma
785
Preparation of superhydrophobic membranes by electrospinning of fluorinated silane functionalized poly(vinylidene fluoride)
786
Preparation of superhydrophobic membranes by electrospinning of fluorinated silane functionalized pullulan
787
Preparation of superhydrophobic poly(methyl methacrylate)-silicon dioxide nanocomposite films
788
Preparation of superhydrophobic polyimide films modified with organosilicasol as effective anticorrosion coatings
789
Preparation of superhydrophobic poly-p-phenylenebenzobisoxazole (PBO) fiber bundles
790
Preparation of superhydrophobic polystyrene membranes by electrospinning
791
Preparation of superhydrophobic silica film on Mg–Nd–Zn–Zr magnesium alloy with enhanced corrosion resistance by combining micro-arc oxidation and sol–gel method
792
Preparation of super-hydrophobic surface on biodegradable polymer by transcribing microscopic pattern of water-repellent leaf
793
Preparation of super-hydrophobic surface on stainless steel
794
Preparation of superhydrophobic surface with a novel sol–gel system
795
Preparation of superhydrophobic titanium surfaces via electrochemical etching and fluorosilane modification
796
Preparation of superhydrophobic zinc coating for corrosion protection
797
Preparation of superparamagnetic magnetite nanoparticles by reverse precipitation method: Contribution of sonochemically generated oxidants
798
Preparation of superparamagnetic magnetite nanoparticles by reverse precipitation method: Contribution of sonochemically generated oxidants
799
Preparation of superparamagnetic nanocomposite particles for hyperthermia therapy application
800
Preparation of Superparamagnetic of Co0.5Zn0.5Fe2O4 at Room Temperature by Co-precipitation Method and Investigation of Its Physical Properties
801
Preparation of superporous poly(4-vinyl pyridine) cryogel and their templated metal nanoparticle composites for H2 production via hydrolysis reactions
802
Preparation of Super-Water-Repellent Alumina Coating Film with High Transparency on Poly(ethylene terephthalate) by the Sol-Gel Method
803
Preparation of supported carbon membranes from furfuryl alcohol by vapor deposition polymerization
804
Preparation of supported carbon molecular sieve membrane from novolac phenol–formaldehyde resin
805
Preparation of supported carbon molecular sieve membranes Original Research Article
806
Preparation of Supported Gold Catalysts by Liquid-Phase Grafting of Gold Acethylacetonate for Low-Temperature Oxidation of CO and of H2
807
Preparation of supported H3PW12040·6H2O for thiophenic compounds alkylation in FCC gasoline Original Research Article
808
Preparation of supported ionic liquid membranes (SILMs) for the removal of acidic gases from crude natural gas Original Research Article
809
Preparation of supported ionic liquid membranes: Influence of the ionic liquid immobilization method on their operational stability
810
Preparation of supported lipid membranes for aquaporin Z incorporation
811
Preparation of supported metallic nanoparticles using supercritical fluids: A review
812
Preparation of supported nano-sized cobalt oxide and fcc cobalt crystallites
813
Preparation of supported NbC catalysts from peroxoniobic acid and in situ XAFS characterization Original Research Article
814
Preparation of supported Ni catalysts with a core/shell structure and their catalytic tests of partial oxidation of methane
815
Preparation of supported Pt–Co alloy nanoparticle catalysts for the oxygen reduction reaction by coverage with silica
816
Preparation of supported Sil-1, TS-1 and VS-1 membranes: Effects of Ti and V metal ions on the membrane synthesis and permeation properties
817
Preparation of supported zirconia ultrafiltration membranes with the aid of polymeric additives
818
Preparation of supramolecular host complex composed of 1D charge-transfer column-like structure using 6,6′-disubstituted-1,1′-bi-2-naphthol and methylviologen
819
Preparation of surface acoustic wave odor sensors by laser-induced forward transfer
820
Preparation of Surface Amino Modified Magnesium Doped Lithium Manganese Oxide Nanosorbent and Its Investigation for Dye Removal
821
Preparation of surface bound silver nanoparticles on polyimide by surface modification method and its application on electroless metal deposition
822
Preparation of surface energy controlled automotive clearcoats loaded with functional silicon additives: Studying the resistance against tree gum attack
823
Preparation of surface initiated polystyrenesulfonate films and PEDOT doped by the films
824
Preparation of surface modifications of mesoporous titania with monosubstituted Keggin units and their catalytic performance for organochlorine pesticide and dyes under UV irradiation Original Research Article
825
Preparation of surface modified magnetic Iron Oxide nanoparticles and study of their colloidal behavior
826
Preparation of surface modified nano-Mg(OH)2 via precipitation method
827
Preparation of surface modified porous membranes and their pervaporation properties Original Research Article
828
Preparation of surface modified zinc oxide nanoparticle with high capacity dye removal ability
829
Preparation of surface molecularly imprinted polymeric microspheres and their recognition property for basic protein lysozyme
830
Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles
831
Preparation of surface-modified albumin nanospheres
832
Preparation of surface-modified carbonaceous thin-film electrodes by NF3 plasma and their electrochemical properties
833
Preparation of surface-modified mesoporous silica membranes and separation mechanism of their pervaporation properties Original Research Article
834
Preparation of surface-silvered graphene-CNTs/polyimide hybrid films: Processing, morphology and properties
835
Preparation of surface-vitrified micron sphere using perlite from Xinyang, China
836
Preparation of surfactant anion-selective electrodes with different selectivity coefficients and a trial to determine each component in binary surfactant mixtures Original Research Article
837
Preparation of surfactant templated nanoporous silica spherical particles by the Sto¨ber method. Effect of solvent composition on the particle size
838
Preparation of surimi gels from striped mullet (Mugil cephalus) using an optimal level of calcium chloride
839
Preparation of Sustained-Release Matrix Tablets of Aspirin with Ethylcellulose, Eudragit RS100 and Eudragit S100 and Studying the Release Profiles and their Sensitivity to Tablet Hardness
840
Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)
841
Preparation of Symmetrical Tetraphenyl Porphyrin Metal Complexes and Their Spectroscopic Studies
842
Preparation of syn and anti cyclophanes having oligothiophene units and their spectral properties
843
Preparation of syndiotactic polystyrene using the doubly bridged dinuclear titanocenes
844
Preparation of Synthetic Calibration Materials for Use in the Microanalysis of Oxide Minerals by Direct Fusion in High-Purity Graphite Electrodes: Preliminary Results for Quartz and Rutile
845
Preparation of synthetic carbon adsorbents and investigation on porous structure of obtained adsorbents with αs method
846
Preparation of synthetic nanopores with transport properties analogous to biological channels
847
Preparation of synthetic rutile and metal-doped LiFePO4 from ilmenite
848
Preparation of synthetic rutile by hydrochloric acid leaching of mechanically activated Panzhihua ilmenite
849
Preparation of synthetic rutile from pre-treated ilmenite/Ti-rich slag with phenol and resorcinol leaching solutions
850
Preparation of tadpole-shaped calcium alginate microparticles with sphericity control
851
Preparation of tagged glucose as a key intermediate in the synthesis of branched oligosaccharides
852
Preparation of tailor-made starch-based aerogel microspheres by the emulsion-gelation method
853
Preparation of tamarind fruit seed activated carbon by microwave heating for the adsorptive treatment of landfill leachate: A laboratory column evaluation
854
Preparation of tamarind gum based soft ion gels having thixotropic properties
855
Preparation of TaN/C (carbon microcoils)/TaN composite microtubes and TaN microtubes by vapor phase diffusion treatment of carbon microcoils
856
Preparation of TaN/C (carbon microcoils)/TaN composite microtubes and TaN microtubes by vapor phase diffusion treatment of carbon microcoils
857
Preparation of tantalum carbonitride by self-propagating high-temperature synthesis of Ta-C system in nitrogen
858
Preparation of tantalum nanopowders through hydrogen reduction of TaCl5 vapor
859
Preparation of tantalum oxide thin films by photo-assisted atomic layer deposition
860
Preparation of targets by electrodeposition for heavy element studies
861
Preparation of targets by electrodeposition for heavy element studies
862
Preparation of targets by sputter deposition
863
Preparation of targets by sputter deposition
864
Preparation of targets for the gas-filled recoil separator TASCA by electrochemical deposition and design of the TASCA target wheel assembly
865
Preparation of targets for the gas-filled recoil separator TASCA by electrochemical deposition and design of the TASCA target wheel assembly
866
Preparation of tartaric acid modified Raney nickel catalysts: study of modification procedure Original Research Article
867
Preparation of Te nanopowder by vacuum distillation
868
Preparation of telechelic oligomers by thermal degradation of propylene copolymers
869
Preparation of tellurite thin films from tellurium isopropoxide precursor by sol–gel processing
870
Preparation of TEM plan-view and cross-sectional specimens of ZnSe/GaAs epilayers by chemical thinning and argon ion milling
871
Preparation of TEM plan-view and cross-sectional specimens of ZnSe/GaAs epilayers by chemical thinning and argon ion milling
872
Preparation of TEM samples for hard ceramic powders
873
Preparation of TEM samples for hard ceramic powders
874
Preparation of temperature-sensitive microemulsion-based gels formed from a triblock copolymer
875
Preparation of TeO2 based thin films by nonhydrolytic sol–gel process
876
Preparation of ternary I-IV-VI nanocrystallines via a mild solution route
877
Preparation of ternary metal chalcogenide (M1-xFexS, M = Cd and Zn) nanocrystallites using single source precursors
878
Preparation of ternary rare earth sulfide LaxCe2–xS3 as red pigment
879
Preparation of tertiary amides via aryl, heteroaryl, and benzyl organozinc reagents; scope and limitations
880
Preparation of tetra-Boc-protected polymyxin B nonapeptide
881
Preparation of tetracycline microparticles suitable for inhalation administration by supercritical fluid expansion depressurization
882
Preparation of tetrafluorohydrazine from nitrogen trifluoride with iron or iron(II) fluoride
883
Preparation of tetrahydroimidazo[2,1-a]isoquinolines and their use as inhibitors of gastric acid secretion Original Research Article
884
Preparation of textured Ba2NaNb5O15 ceramics by templated grain growth
885
Preparation of textured Bi3TiNbO9 ceramics
886
Preparation of the 14-membered l,l-cycloisodityrosine subunit of RP 66453
887
Preparation of the antithrombotic and antimicrobial coating through layer-by-layer self-assembly of nattokinase-nanosilver complex and polyethylenimine
888
Preparation of the BaTiO3–SiO2 hybrid particles for the catalyst of methane steam reforming process
889
Preparation of the bulk Fe–Al–Ga–P–C–B–Si glassy alloys in a ringed form by copper mold casting
890
Preparation of the bulk Fe–Al–Ga–P–C–B–Si glassy alloys in a ringed form by copper mold casting
891
Preparation of the CdS semiconductor nanofibril by UV irradiation
892
Preparation of the cellulose/silica hybrid containing cationic group by sol–gel crosslinking process and its dyeing properties
893
Preparation of the cellulose/silica hybrid containing cationic group by sol–gel crosslinking process and its dyeing properties
894
Preparation of the composite LaNi3.7Al1.3/Ni–S–Co alloy film and its HER activity in alkaline medium
895
Preparation of the conjugated polyene chains with the 1,4-dimethyl substitution
896
Preparation of the crack-free single phase (Zn1–xCdx)13Sb10 by a gradient freeze method and their structural and thermoelectric properties
897
Preparation of the cubic-type La2O3 phase by thermal decomposition of LaI3
898
Preparation of the egg membrane bandage contained the antibacterial Ag nanoparticles
899
Preparation of the electroless Ni–P and Ni–Cu–P coatings on engine cylinder and their tribological behaviors under bio-oil lubricated conditions
900
Preparation of the electrospun chitosan nanofibers and their applications to the adsorption of Cu(II) and Pb(II) ions from an aqueous solution
901
Preparation of the femoral bone cavity in cementless stems: broaching versus compaction
902
Preparation of the First Examples of Ansa-Spiro Substituted Fluorophosphazenes and Their Structural Studies: Analysis of C-H···F-P Weak Interactions in Substituted Fluorophosphazenes
903
Preparation of the first ortho-substituted pentafluorosulfanylbenzenes
904
Preparation of the future teacher for work with gifted children
905
Preparation of the highly loaded and well-dispersed NiO/SBA-15 for methanation of producer gas
906
Preparation of the hydrocarbon-soluble trifluoro complex LTiF3 with a β-diketiminato ligand
907
Preparation of the hydrophilic/hydrophobic silica particles
908
Preparation of the hypoxia imaging PET tracer [18F]FAZA: reaction parameters and automation
909
Preparation of the La0.8Sr0.2MnO3 films on STO and LAO substrates by excimer laser-assisted metal organic deposition using the KrF laser
910
Preparation of the liquid lithium divertor plates for NSTX
911
Preparation of the MacMillan imidazolidinones
912
Preparation of the major urinary metabolite of (−)-prostaglandin E2
913
Preparation of the manufacture of the ITER correction coils
914
Preparation of the metastable compound Au3Si by quenching liquid droplets of a Au–25 at.% Si allow into water
915
Preparation of the metastable compound Au3Si by quenching liquid droplets of a Au–25 at.% Si allow into water
916
Preparation of the methyl ester of hyaluronan and its enzymatic degradation Original Research Article
917
Preparation of the mixture of graphene nanosheets and carbon nanospheres with high adsorptivity by electrolyzing graphite rod and its application in hydroquinone detection
918
Preparation of the monomers of gingerols and 6-shogaol by flash high speed counter-current chromatography
919
Preparation of the multifunctional antireflective films from a templating composite silica sol with entwining structures
920
Preparation of the Neolignan Natural Product Grossamide by a Continuous-Flow Process
921
Preparation of the Ni-B amorphous alloys with variable boron content and its correlation to the hydrogenation activity Original Research Article
922
Preparation of the nickel foam/Ni–Ce–Co–O film electrode by thermal decomposition for oxygen evolution reaction
923
Preparation of the NiFe2O4 electrochemical film for the solid-state reference electrode based on EB-PVD
924
Preparation of the Ni–P composite coating co-deposited by nano TiC particles and evaluation of itʹs corrosion property
925
Preparation of the novel fluorine-18-labeled VIP analog for PET imaging studies using two different synthesis methods
926
Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption
927
Preparation of the novel manganese-embedded PAN-based activated carbon nanofibers by electrospinning and their toluene adsorption
928
Preparation of the novel XC(O)SeX species (X = Cl, Br) through matrix photochemical reactions of OCSe with Cl2 and Br2 at cryogenic temperatures
929
Preparation of the palladium(II) dimethylamide Pd(2,6-(Ph2PCH2)2C6H3)(NMe2) at low temperatures and its ligand exchange with the dicyclohexylamide
930
Preparation of the Pb(Mg1/3Nb2/3)O3 films by aqueous tape casting
931
Preparation of the pentasaccharide hapten of the GPL of Mycobacterium avium serovar 19 by achieving the glycosylation of a tertiary hydroxyl group Original Research Article
932
Preparation of the Persian Gulf Echinometra mathaei Organic Extracts and Investigation of Their Antibacterial Activity
933
Preparation of the Persian Gulf Echinometra mathaei Organic Extracts and Investigation of Their Antibacterial Activity
934
Preparation of the photosensitive copper complex and CuO film pattern
935
Preparation of the poly(vinyl alcohol)/layered double hydroxide nanocomposite
936
PREPARATION OF THE POPULATION AND HEALTHCARE SYSTEM FOR ACTION IN CASES OF RADIATION ACCIDENT AND NUCLEAR TERRORISM
937
Preparation of the Potential Ocular inserts by Electrospinning Method to Achieve the Prolong Release Profile of Triamcinolone Acetonide
938
Preparation of the PVA/HAP composite polymer membrane for alkaline DMFC application Original Research Article
939
Preparation of the reticulated hydroxyapatite ceramics using carbon-coated polymeric sponge with elongated pores as a novel template
940
Preparation of the rod-like β-Si3N4 particles favoring the self-reinforcing Si3N4 ceramics
941
Preparation of the silicalite membranes using a seeding technique under various hydrothermal conditions Original Research Article
942
Preparation of the sodium salt of high acyl gellan and characterization of its structure, thermal and rheological behaviors
943
Preparation of the Speech-LanguagePathologist Specializing in Voice: An Educational Survey
944
Preparation of the squalene-based capsules by membrane emulsification method and polyelectrolyte multilayer adsorption
945
Preparation of the SrCe0.95Yb0.05O3−α proton conductor and study of the electrokinetics at the SrCe0.95Yb0.05O3−α/Pd interface
946
Preparation of the stimuli-responsive ZnS/PNIPAM hollow spheres
947
Preparation of the subnanometer thick epitaxial Al2O3(0001) layers on Fe(110) for magnetic tunnel junctions
948
Preparation of the substituted salicylato of titanocene derivatives by the liquid–liquid interfacial reaction
949
Preparation of the thermally stable conducting polymer PEDOT – Sulfonated poly(imide)
950
Preparation of the thicker americium targets by molecular plating
951
Preparation of the Three C1-C7, C8-C15, and C16-N22 Fragments of the Hsp90 Inhibitor Herbimycin A
952
Preparation of the ultrafine SrAl2O4:Eu,Dy needle-like phosphor and its optical properties
953
Preparation of the ZrTiAlV alloy with ultra-high strength and good ductility
954
Preparation of the β-cyclodextrin-vitamin C (β-CD-Vc) inclusion complex under high hydrostatic pressure (HHP)
955
Preparation of thermal stable porous polyimide membranes by phase inversion process for lithium-ion battery
956
Preparation of thermally curable conductive films PEDOT:P(SS-NMA) and their performances on weather stability and water resistance
957
Preparation of thermally stable polymer electrolytes from imidazolium-type ionic liquid derivatives
958
Preparation of thermoplastic elastomer from natural rubber grafted with polystyrene
959
Preparation of thermo-responsive acrylic hydrogels useful for the application in transdermal drug delivery systems
960
Preparation of thermoresponsive and pH-sensitivity polymer magnetic hydrogel nanospheres as anticancer drug carriers
961
Preparation of thermo-responsive core-shell microcapsules with a porous membrane and poly(N-isopropylacrylamide) gates
962
Preparation of thermo-responsive gating membranes with controllable response temperature
963
Preparation of thermoresponsive polymer brush surfaces and their interaction with cells
964
Preparation of thermo-responsive polymer brushes on hydrophilic polymeric beads by surface-initiated atom transfer radical polymerization for a highly resolutive separation of peptides
965
Preparation of thermo-responsive polypropylene membranes via surface entrapment of poly(N-isopropylacrylamide)-containing macromolecules
966
Preparation of thermo-responsive superhydrophobic TiO2/poly(N-isopropylacrylamide) microspheres
967
Preparation of thermosensitive chitosan with poly(N-isopropylacrylamide) side at hydroxyl group via O-maleoyl-N-phthaloyl-chitosan (MPCS)
968
Preparation of thermosensitive polymeric organogels and their drug release behaviors
969
Preparation of thermostable electroconductive composite plates from expanded graphite and polyimide
970
Preparation of thermostable trypsin–polysaccharide neoglycoenzymes through Ugi multicomponent reaction
971
Preparation of thick enriched isotopic Si targets by the HIVIPP method
972
Preparation of thick enriched isotopic Si targets by the HIVIPP method
973
Preparation of thick GeO2 glass film with high UV photosensitivity
974
Preparation of thick, crack-free germanosilicate glass films by polyvinylpyrrolidone and study of the UV-bleachable absorption band
975
Preparation of thieno[2,3-b]pyrroles starting from ketene-N,S-acetals
976
Preparation of thin and highly stable Pd/Ag composite membranes and simulative analysis of transfer resistance for hydrogen separation
977
Preparation of thin carbon fibers from phenol–formaldehyde polymer micro-beads dispersed in polyethylene matrix Original Research Article
978
Preparation of thin carbon fibers from waste wood-derived phenolic resin
979
Preparation of thin ceramic monofilaments for characterization by TEM
980
Preparation of thin ceramic monofilaments for characterization by TEM
981
Preparation of thin ceramic monofilaments for characterization by TEM
982
Preparation of thin ceramic monofilaments for TEM observation with novel embedding processes
983
Preparation of thin ceramic monofilaments for TEM observation with novel embedding processes
984
Preparation of thin film composite membranes with polyamide film on hydrophilic supports
985
Preparation of thin film of CaZrO3 by pulsed laser deposition
986
Preparation of thin film polycrystalline silicon on glass by photo-thermal annealing
987
Preparation of thin film SOFCs working at reduced temperature
988
Preparation of thin films and nanostructured coatings for clean tech applications: A primer
989
Preparation of thin films by sulfurizing sol–gel deposited precursors
990
Preparation of thin films of carbon-based compounds
991
Preparation of thin films of graphite-like B/C/N materials on Ni(1 1 1) and HOPG substrates
992
Preparation of thin films of YBa2Cu3Ox with a smooth surface by atomic layer MOCVD
993
Preparation of thin films of YBa2Cu3Ox with a smooth surface by atomic layer MOCVD
994
Preparation of thin Ga-doped ZnO layers for core–shell GaP/ZnO nanowires
995
Preparation of thin iron films by electrodeposition and characterization of their local magnetic properties
996
Preparation of thin layer materials with macroporous microstructure for SOFC applications
997
Preparation of thin metallic titanium foils as hydrogen targets
998
Preparation of thin metallic titanium foils as hydrogen targets
999
Preparation of thin Nd-doped YVO4 single crystal rods by the floating zone method
1000
Preparation of thin palladium composite membrane tube by a CVD technique and its hydrogen permselectivity
